From 940b4d1848e8c70ab7642901a68594e8016caffc Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 27 Apr 2024 18:51:28 +0200 Subject: Adding upstream version 1:7.0.4. Signed-off-by: Daniel Baumann --- cui/source/tabpages/connect.cxx | 419 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 419 insertions(+) create mode 100644 cui/source/tabpages/connect.cxx (limited to 'cui/source/tabpages/connect.cxx') diff --git a/cui/source/tabpages/connect.cxx b/cui/source/tabpages/connect.cxx new file mode 100644 index 000000000..70b38bbc9 --- /dev/null +++ b/cui/source/tabpages/connect.cxx @@ -0,0 +1,419 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#include +#include + +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include + +const sal_uInt16 SvxConnectionPage::pRanges[] = +{ + SDRATTR_EDGE_FIRST, + SDRATTR_EDGE_LAST, + 0 +}; + +/************************************************************************* +|* +|* dialog for changing connectors +|* +\************************************************************************/ +SvxConnectionDialog::SvxConnectionDialog(weld::Window* pParent, const SfxItemSet& rInAttrs, const SdrView* pSdrView) + : SfxSingleTabDialogController(pParent, &rInAttrs) +{ + auto xPage = std::make_unique(get_content_area(), this, rInAttrs); + + xPage->SetView(pSdrView); + xPage->Construct(); + + SetTabPage(std::move(xPage)); + m_xDialog->set_title(CuiResId(RID_SVXSTR_CONNECTOR)); +} + +/************************************************************************* +|* +|* page for changing connectors +|* +\************************************************************************/ + +SvxConnectionPage::SvxConnectionPage(weld::Container* pPage, weld::DialogController* pController, const SfxItemSet& rInAttrs) + : SfxTabPage(pPage, pController, "cui/ui/connectortabpage.ui", "ConnectorTabPage", &rInAttrs) + , rOutAttrs(rInAttrs) + , aAttrSet(*rInAttrs.GetPool()) + , pView(nullptr) + , m_xLbType(m_xBuilder->weld_combo_box("LB_TYPE")) + , m_xFtLine1(m_xBuilder->weld_label("FT_LINE_1")) + , m_xMtrFldLine1(m_xBuilder->weld_metric_spin_button("MTR_FLD_LINE_1", FieldUnit::CM)) + , m_xFtLine2(m_xBuilder->weld_label("FT_LINE_2")) + , m_xMtrFldLine2(m_xBuilder->weld_metric_spin_button("MTR_FLD_LINE_2", FieldUnit::CM)) + , m_xFtLine3(m_xBuilder->weld_label("FT_LINE_3")) + , m_xMtrFldLine3(m_xBuilder->weld_metric_spin_button("MTR_FLD_LINE_3", FieldUnit::CM)) + , m_xMtrFldHorz1(m_xBuilder->weld_metric_spin_button("MTR_FLD_HORZ_1", FieldUnit::MM)) + , m_xMtrFldVert1(m_xBuilder->weld_metric_spin_button("MTR_FLD_VERT_1", FieldUnit::MM)) + , m_xMtrFldHorz2(m_xBuilder->weld_metric_spin_button("MTR_FLD_HORZ_2", FieldUnit::MM)) + , m_xMtrFldVert2(m_xBuilder->weld_metric_spin_button("MTR_FLD_VERT_2", FieldUnit::MM)) + , m_xCtlPreview(new weld::CustomWeld(*m_xBuilder, "CTL_PREVIEW", m_aCtlPreview)) +{ + SfxItemPool* pPool = rOutAttrs.GetPool(); + DBG_ASSERT( pPool, "Where is the pool" ); + eUnit = pPool->GetMetric( SDRATTR_EDGENODE1HORZDIST ); + + FillTypeLB(); + + const FieldUnit eFUnit = GetModuleFieldUnit( rInAttrs ); + SetFieldUnit( *m_xMtrFldHorz1, eFUnit ); + SetFieldUnit( *m_xMtrFldHorz2, eFUnit ); + SetFieldUnit( *m_xMtrFldVert1, eFUnit ); + SetFieldUnit( *m_xMtrFldVert2, eFUnit ); + SetFieldUnit( *m_xMtrFldLine1, eFUnit ); + SetFieldUnit( *m_xMtrFldLine2, eFUnit ); + SetFieldUnit( *m_xMtrFldLine3, eFUnit ); + if( eFUnit == FieldUnit::MM ) + { + m_xMtrFldHorz1->set_increments(50, 500, FieldUnit::NONE); + m_xMtrFldHorz2->set_increments(50, 500, FieldUnit::NONE); + m_xMtrFldVert1->set_increments(50, 500, FieldUnit::NONE); + m_xMtrFldVert2->set_increments(50, 500, FieldUnit::NONE); + m_xMtrFldLine1->set_increments(50, 500, FieldUnit::NONE); + m_xMtrFldLine2->set_increments(50, 500, FieldUnit::NONE); + m_xMtrFldLine3->set_increments(50, 500, FieldUnit::NONE); + } + + Link aLink(LINK(this, SvxConnectionPage, ChangeAttrEditHdl_Impl)); + m_xMtrFldHorz1->connect_value_changed(aLink); + m_xMtrFldVert1->connect_value_changed(aLink); + m_xMtrFldHorz2->connect_value_changed(aLink); + m_xMtrFldVert2->connect_value_changed(aLink); + m_xMtrFldLine1->connect_value_changed(aLink); + m_xMtrFldLine2->connect_value_changed(aLink); + m_xMtrFldLine3->connect_value_changed(aLink); + m_xLbType->connect_changed(LINK(this, SvxConnectionPage, ChangeAttrListBoxHdl_Impl)); +} + +SvxConnectionPage::~SvxConnectionPage() +{ + m_xCtlPreview.reset(); +} + +/************************************************************************* +|* +|* reads passed Item-Set +|* +\************************************************************************/ + +void SvxConnectionPage::Reset( const SfxItemSet* rAttrs ) +{ + const SfxPoolItem* pItem = GetItem( *rAttrs, SDRATTR_EDGENODE1HORZDIST ); + const SfxItemPool* pPool = rAttrs->GetPool(); + + // SdrEdgeNode1HorzDistItem + if( !pItem ) + pItem = &pPool->GetDefaultItem( SDRATTR_EDGENODE1HORZDIST ); + SetMetricValue(*m_xMtrFldHorz1, static_cast(pItem)->GetValue(), + eUnit); + m_xMtrFldHorz1->save_value(); + + // SdrEdgeNode2HorzDistItem + pItem = GetItem( *rAttrs, SDRATTR_EDGENODE2HORZDIST ); + if( !pItem ) + pItem = &pPool->GetDefaultItem( SDRATTR_EDGENODE2HORZDIST ); + SetMetricValue(*m_xMtrFldHorz2, static_cast(pItem)->GetValue(), + eUnit); + m_xMtrFldHorz2->save_value(); + + // SdrEdgeNode1VertDistItem + pItem = GetItem( *rAttrs, SDRATTR_EDGENODE1VERTDIST ); + if( !pItem ) + pItem = &pPool->GetDefaultItem( SDRATTR_EDGENODE1VERTDIST ); + SetMetricValue(*m_xMtrFldVert1, static_cast(pItem)->GetValue(), + eUnit); + m_xMtrFldVert1->save_value(); + + // SdrEdgeNode2VertDistItem + pItem = GetItem( *rAttrs, SDRATTR_EDGENODE2VERTDIST ); + if( !pItem ) + pItem = &pPool->GetDefaultItem( SDRATTR_EDGENODE2VERTDIST ); + SetMetricValue(*m_xMtrFldVert2, static_cast(pItem)->GetValue(), + eUnit); + m_xMtrFldVert2->save_value(); + + // SdrEdgeLine1DeltaItem + pItem = GetItem( *rAttrs, SDRATTR_EDGELINE1DELTA ); + if( !pItem ) + pItem = &pPool->GetDefaultItem( SDRATTR_EDGELINE1DELTA ); + SetMetricValue(*m_xMtrFldLine1, static_cast(pItem)->GetValue(), eUnit); + m_xMtrFldLine1->save_value(); + + // SdrEdgeLine2DeltaItem + pItem = GetItem( *rAttrs, SDRATTR_EDGELINE2DELTA ); + if( !pItem ) + pItem = &pPool->GetDefaultItem( SDRATTR_EDGELINE2DELTA ); + SetMetricValue(*m_xMtrFldLine2, static_cast(pItem)->GetValue(), eUnit); + m_xMtrFldLine2->save_value(); + + // SdrEdgeLine3DeltaItem + pItem = GetItem( *rAttrs, SDRATTR_EDGELINE3DELTA ); + if( !pItem ) + pItem = &pPool->GetDefaultItem( SDRATTR_EDGELINE3DELTA ); + SetMetricValue(*m_xMtrFldLine3, static_cast(pItem)->GetValue(), eUnit); + m_xMtrFldLine3->save_value(); + + // SdrEdgeLineDeltaAnzItem + pItem = GetItem( *rAttrs, SDRATTR_EDGELINEDELTACOUNT ); + if( !pItem ) + pItem = &pPool->GetDefaultItem( SDRATTR_EDGELINEDELTACOUNT ); + switch (static_cast(pItem)->GetValue()) + { + case 0: + m_xFtLine1->set_sensitive(false); + m_xMtrFldLine1->set_sensitive(false); + m_xMtrFldLine1->set_text(""); + [[fallthrough]]; + case 1: + m_xFtLine2->set_sensitive(false); + m_xMtrFldLine2->set_sensitive(false); + m_xMtrFldLine2->set_text(""); + [[fallthrough]]; + case 2: + m_xFtLine3->set_sensitive(false); + m_xMtrFldLine3->set_sensitive(false); + m_xMtrFldLine3->set_text(""); + break; + } + + // SdrEdgeKindItem + pItem = GetItem( *rAttrs, SDRATTR_EDGEKIND ); + if( !pItem ) + pItem = &pPool->GetDefaultItem( SDRATTR_EDGEKIND ); + m_xLbType->set_active( + sal::static_int_cast(static_cast(pItem)->GetValue())); + m_xLbType->save_value(); +} + +/************************************************************************* +|* +|* fills the passed Item-Set width Dialogbox attributes +|* +\************************************************************************/ + +bool SvxConnectionPage::FillItemSet( SfxItemSet* rAttrs) +{ + bool bModified = false; + sal_Int32 nValue; + + if (m_xMtrFldHorz1->get_value_changed_from_saved()) + { + nValue = GetCoreValue(*m_xMtrFldHorz1, eUnit); + rAttrs->Put( SdrEdgeNode1HorzDistItem( nValue ) ); + bModified = true; + } + + if (m_xMtrFldHorz2->get_value_changed_from_saved()) + { + nValue = GetCoreValue(*m_xMtrFldHorz2, eUnit); + rAttrs->Put( SdrEdgeNode2HorzDistItem( nValue ) ); + bModified = true; + } + + if (m_xMtrFldVert1->get_value_changed_from_saved()) + { + nValue = GetCoreValue(*m_xMtrFldVert1, eUnit); + rAttrs->Put( SdrEdgeNode1VertDistItem( nValue ) ); + bModified = true; + } + + if (m_xMtrFldVert2->get_value_changed_from_saved()) + { + nValue = GetCoreValue(*m_xMtrFldVert2, eUnit); + rAttrs->Put( SdrEdgeNode2VertDistItem( nValue ) ); + bModified = true; + } + + if (m_xMtrFldLine1->get_value_changed_from_saved()) + { + nValue = GetCoreValue(*m_xMtrFldLine1, eUnit); + rAttrs->Put( makeSdrEdgeLine1DeltaItem( nValue ) ); + bModified = true; + } + + if (m_xMtrFldLine2->get_value_changed_from_saved()) + { + nValue = GetCoreValue(*m_xMtrFldLine2, eUnit); + rAttrs->Put( makeSdrEdgeLine2DeltaItem( nValue ) ); + bModified = true; + } + + if (m_xMtrFldLine3->get_value_changed_from_saved()) + { + nValue = GetCoreValue(*m_xMtrFldLine3, eUnit); + rAttrs->Put( makeSdrEdgeLine3DeltaItem( nValue ) ); + bModified = true; + } + + int nPos = m_xLbType->get_active(); + if (m_xLbType->get_value_changed_from_saved()) + { + if (nPos != -1) + { + rAttrs->Put( SdrEdgeKindItem( static_cast(nPos) ) ); + bModified = true; + } + } + + return bModified; +} + +void SvxConnectionPage::Construct() +{ + DBG_ASSERT( pView, "No valid View transfer!" ); + + m_aCtlPreview.SetView(pView); + m_aCtlPreview.Construct(); +} + +/************************************************************************* +|* +|* creates the page +|* +\************************************************************************/ +std::unique_ptr SvxConnectionPage::Create(weld::Container* pPage, weld::DialogController* pController, + const SfxItemSet* rAttrs) +{ + return std::make_unique(pPage, pController, *rAttrs); +} + +IMPL_LINK_NOARG(SvxConnectionPage, ChangeAttrListBoxHdl_Impl, weld::ComboBox&, void) +{ + int nPos = m_xLbType->get_active(); + if (nPos != -1) + { + aAttrSet.Put( SdrEdgeKindItem( static_cast(nPos) ) ); + } + + m_aCtlPreview.SetAttributes(aAttrSet); + + // get the number of line displacements + sal_uInt16 nCount = m_aCtlPreview.GetLineDeltaCount(); + + m_xFtLine3->set_sensitive( nCount > 2 ); + m_xMtrFldLine3->set_sensitive( nCount > 2 ); + if( nCount > 2 ) + m_xMtrFldLine3->set_value(m_xMtrFldLine3->get_value(FieldUnit::NONE), FieldUnit::NONE); + else + m_xMtrFldLine3->set_text(""); + + m_xFtLine2->set_sensitive( nCount > 1 ); + m_xMtrFldLine2->set_sensitive( nCount > 1 ); + if( nCount > 1 ) + m_xMtrFldLine2->set_value(m_xMtrFldLine2->get_value(FieldUnit::NONE), FieldUnit::NONE); + else + m_xMtrFldLine2->set_text(""); + + m_xFtLine1->set_sensitive( nCount > 0 ); + m_xMtrFldLine1->set_sensitive( nCount > 0 ); + if( nCount > 0 ) + m_xMtrFldLine1->set_value(m_xMtrFldLine1->get_value(FieldUnit::NONE), FieldUnit::NONE); + else + m_xMtrFldLine1->set_text(""); +} + +IMPL_LINK(SvxConnectionPage, ChangeAttrEditHdl_Impl, weld::MetricSpinButton&, r, void) +{ + if (&r == m_xMtrFldHorz1.get()) + { + sal_Int32 nValue = GetCoreValue(*m_xMtrFldHorz1, eUnit); + aAttrSet.Put( SdrEdgeNode1HorzDistItem( nValue ) ); + } + + if (&r == m_xMtrFldHorz2.get()) + { + sal_Int32 nValue = GetCoreValue( *m_xMtrFldHorz2, eUnit ); + aAttrSet.Put( SdrEdgeNode2HorzDistItem( nValue ) ); + } + + if (&r == m_xMtrFldVert1.get()) + { + sal_Int32 nValue = GetCoreValue(*m_xMtrFldVert1, eUnit); + aAttrSet.Put( SdrEdgeNode1VertDistItem( nValue ) ); + } + + if (&r == m_xMtrFldVert2.get()) + { + sal_Int32 nValue = GetCoreValue(*m_xMtrFldVert2, eUnit); + aAttrSet.Put( SdrEdgeNode2VertDistItem( nValue ) ); + } + + if (&r == m_xMtrFldLine1.get()) + { + sal_Int32 nValue = GetCoreValue(*m_xMtrFldLine1, eUnit); + aAttrSet.Put( makeSdrEdgeLine1DeltaItem( nValue ) ); + } + + if (&r == m_xMtrFldLine2.get()) + { + sal_Int32 nValue = GetCoreValue(*m_xMtrFldLine2, eUnit); + aAttrSet.Put( makeSdrEdgeLine2DeltaItem( nValue ) ); + } + + if (&r == m_xMtrFldLine3.get()) + { + sal_Int32 nValue = GetCoreValue(*m_xMtrFldLine3, eUnit); + aAttrSet.Put( makeSdrEdgeLine3DeltaItem( nValue ) ); + } + + m_aCtlPreview.SetAttributes(aAttrSet); +} + +void SvxConnectionPage::FillTypeLB() +{ + // fill ListBox with connector names + const SfxPoolItem* pItem = GetItem( rOutAttrs, SDRATTR_EDGEKIND ); + const SfxItemPool* pPool = rOutAttrs.GetPool(); + + if( !pItem ) + pItem = &pPool->GetDefaultItem( SDRATTR_EDGEKIND ); + const SdrEdgeKindItem* pEdgeKindItem = static_cast(pItem); + const sal_uInt16 nCount = pEdgeKindItem->GetValueCount(); + for (sal_uInt16 i = 0; i < nCount; i++) + { + OUString aStr = SdrEdgeKindItem::GetValueTextByPos(i); + m_xLbType->append_text(aStr); + } +} +void SvxConnectionPage::PageCreated(const SfxAllItemSet& aSet) +{ + const OfaPtrItem* pOfaPtrItem = aSet.GetItem(SID_OBJECT_LIST, false); + if (pOfaPtrItem) + SetView( static_cast(pOfaPtrItem->GetValue()) ); + + Construct(); +} + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ -- cgit v1.2.3