/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
 * This file is part of the LibreOffice project.
 *
 * This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/.
 *
 * This file incorporates work covered by the following license notice:
 *
 *   Licensed to the Apache Software Foundation (ASF) under one or more
 *   contributor license agreements. See the NOTICE file distributed
 *   with this work for additional information regarding copyright
 *   ownership. The ASF licenses this file to you under the Apache
 *   License, Version 2.0 (the "License"); you may not use this file
 *   except in compliance with the License. You may obtain a copy of
 *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
 */

#include <comphelper/string.hxx>
#include <svl/eitem.hxx>
#include <svl/intitem.hxx>
#include <editeng/editeng.hxx>
#include <editeng/editview.hxx>
#include <editeng/editdata.hxx>
#include <editeng/lrspitem.hxx>

#include <math.h>
#include <svl/style.hxx>
#include <editeng/outliner.hxx>
#include "paralist.hxx"
#include <editeng/outlobj.hxx>
#include "outleeng.hxx"
#include "outlundo.hxx"
#include <editeng/eeitem.hxx>
#include <editeng/editstat.hxx>
#include <editeng/overflowingtxt.hxx>
#include <editeng/editobj.hxx>
#include <svl/itemset.hxx>
#include <vcl/metric.hxx>
#include <editeng/numitem.hxx>
#include <editeng/adjustitem.hxx>
#include <vcl/window.hxx>
#include <vcl/GraphicObject.hxx>
#include <editeng/svxfont.hxx>
#include <editeng/brushitem.hxx>
#include <svl/itempool.hxx>
#include <libxml/xmlwriter.h>
#include <sal/log.hxx>
#include <o3tl/safeint.hxx>
#include <osl/diagnose.h>

#include <memory>
using std::advance;


// Outliner


void Outliner::ImplCheckDepth( sal_Int16& rnDepth ) const
{
    if( rnDepth < gnMinDepth )
        rnDepth = gnMinDepth;
    else if( rnDepth > nMaxDepth )
        rnDepth = nMaxDepth;
}

Paragraph* Outliner::Insert(const OUString& rText, sal_Int32 nAbsPos, sal_Int16 nDepth)
{
    DBG_ASSERT(pParaList->GetParagraphCount(),"Insert:No Paras");

    Paragraph* pPara;

    ImplCheckDepth( nDepth );

    sal_Int32 nParagraphCount = pParaList->GetParagraphCount();
    if( nAbsPos > nParagraphCount )
        nAbsPos = nParagraphCount;

    if( bFirstParaIsEmpty )
    {
        pPara = pParaList->GetParagraph( 0 );
        if( pPara->GetDepth() != nDepth )
        {
            nDepthChangedHdlPrevDepth = pPara->GetDepth();
            ParaFlag nPrevFlags = pPara->nFlags;
            pPara->SetDepth( nDepth );
            DepthChangedHdl(pPara, nPrevFlags);
        }
        pPara->nFlags |= ParaFlag::HOLDDEPTH;
        SetText( rText, pPara );
    }
    else
    {
        bool bUpdate = pEditEngine->GetUpdateMode();
        pEditEngine->SetUpdateMode( false );
        ImplBlockInsertionCallbacks( true );
        pPara = new Paragraph( nDepth );
        pParaList->Insert( std::unique_ptr<Paragraph>(pPara), nAbsPos );
        pEditEngine->InsertParagraph( nAbsPos, OUString() );
        DBG_ASSERT(pPara==pParaList->GetParagraph(nAbsPos),"Insert:Failed");
        ImplInitDepth( nAbsPos, nDepth, false );
        ParagraphInsertedHdl(pPara);
        pPara->nFlags |= ParaFlag::HOLDDEPTH;
        SetText( rText, pPara );
        ImplBlockInsertionCallbacks( false );
        pEditEngine->SetUpdateMode( bUpdate );
    }
    bFirstParaIsEmpty = false;
    DBG_ASSERT(pEditEngine->GetParagraphCount()==pParaList->GetParagraphCount(),"SetText failed");
    return pPara;
}


void Outliner::ParagraphInserted( sal_Int32 nPara )
{

    if ( nBlockInsCallback )
        return;

    if( bPasting || pEditEngine->IsInUndo() )
    {
        Paragraph* pPara = new Paragraph( -1 );
        pParaList->Insert( std::unique_ptr<Paragraph>(pPara), nPara );
        if( pEditEngine->IsInUndo() )
        {
            pPara->nFlags = ParaFlag::SETBULLETTEXT;
            pPara->bVisible = true;
            const SfxInt16Item& rLevel = pEditEngine->GetParaAttrib( nPara, EE_PARA_OUTLLEVEL );
            pPara->SetDepth( rLevel.GetValue() );
        }
    }
    else
    {
        sal_Int16 nDepth = -1;
        Paragraph* pParaBefore = pParaList->GetParagraph( nPara-1 );
        if ( pParaBefore )
            nDepth = pParaBefore->GetDepth();

        Paragraph* pPara = new Paragraph( nDepth );
        pParaList->Insert( std::unique_ptr<Paragraph>(pPara), nPara );

        if( !pEditEngine->IsInUndo() )
        {
            ImplCalcBulletText( nPara, true, false );
            ParagraphInsertedHdl(pPara);
        }
    }
}

void Outliner::ParagraphDeleted( sal_Int32 nPara )
{

    if ( nBlockInsCallback || ( nPara == EE_PARA_ALL ) )
        return;

    Paragraph* pPara = pParaList->GetParagraph( nPara );
    if (!pPara)
        return;

    sal_Int16 nDepth = pPara->GetDepth();

    if( !pEditEngine->IsInUndo() )
    {
        aParaRemovingHdl.Call( { this, pPara } );
    }

    pParaList->Remove( nPara );

    if( pEditEngine->IsInUndo() || bPasting )
        return;

    pPara = pParaList->GetParagraph( nPara );
    if ( pPara && ( pPara->GetDepth() > nDepth ) )
    {
        ImplCalcBulletText( nPara, true, false );
        // Search for next on the this level ...
        while ( pPara && pPara->GetDepth() > nDepth )
            pPara = pParaList->GetParagraph( ++nPara );
    }

    if ( pPara && ( pPara->GetDepth() == nDepth ) )
        ImplCalcBulletText( nPara, true, false );
}

void Outliner::Init( OutlinerMode nMode )
{
    nOutlinerMode = nMode;

    Clear();

    EEControlBits nCtrl = pEditEngine->GetControlWord();
    nCtrl &= ~EEControlBits(EEControlBits::OUTLINER|EEControlBits::OUTLINER2);

    SetMaxDepth( 9 );

    switch ( ImplGetOutlinerMode() )
    {
        case OutlinerMode::TextObject:
        case OutlinerMode::TitleObject:
            break;

        case OutlinerMode::OutlineObject:
            nCtrl |= EEControlBits::OUTLINER2;
            break;
        case OutlinerMode::OutlineView:
            nCtrl |= EEControlBits::OUTLINER;
            break;

        default: OSL_FAIL( "Outliner::Init - Invalid Mode!" );
    }

    pEditEngine->SetControlWord( nCtrl );

    const bool bWasUndoEnabled(IsUndoEnabled());
    EnableUndo(false);
    ImplInitDepth( 0, -1, false );
    GetUndoManager().Clear();
    EnableUndo(bWasUndoEnabled);
}

void Outliner::SetMaxDepth( sal_Int16 nDepth )
{
    if( nMaxDepth != nDepth )
    {
        nMaxDepth = std::min( nDepth, sal_Int16(SVX_MAX_NUM-1) );
    }
}

sal_Int16 Outliner::GetDepth( sal_Int32 nPara ) const
{
    Paragraph* pPara = pParaList->GetParagraph( nPara );
    DBG_ASSERT( pPara, "Outliner::GetDepth - Paragraph not found!" );
    return pPara ? pPara->GetDepth() : -1;
}

void Outliner::SetDepth( Paragraph* pPara, sal_Int16 nNewDepth )
{

    ImplCheckDepth( nNewDepth );

    if ( nNewDepth == pPara->GetDepth() )
        return;

    nDepthChangedHdlPrevDepth = pPara->GetDepth();
    ParaFlag nPrevFlags = pPara->nFlags;

    sal_Int32 nPara = GetAbsPos( pPara );
    ImplInitDepth( nPara, nNewDepth, true );
    ImplCalcBulletText( nPara, false, false );

    if ( ImplGetOutlinerMode() == OutlinerMode::OutlineObject )
        ImplSetLevelDependentStyleSheet( nPara );

    DepthChangedHdl(pPara, nPrevFlags);
}

sal_Int16 Outliner::GetNumberingStartValue( sal_Int32 nPara )
{
    Paragraph* pPara = pParaList->GetParagraph( nPara );
    DBG_ASSERT( pPara, "Outliner::GetNumberingStartValue - Paragraph not found!" );
    return pPara ? pPara->GetNumberingStartValue() : -1;
}

void Outliner::SetNumberingStartValue( sal_Int32 nPara, sal_Int16 nNumberingStartValue )
{
    Paragraph* pPara = pParaList->GetParagraph( nPara );
    DBG_ASSERT( pPara, "Outliner::GetNumberingStartValue - Paragraph not found!" );
    if( pPara && pPara->GetNumberingStartValue() != nNumberingStartValue )
    {
        if( IsUndoEnabled() && !IsInUndo() )
            InsertUndo( std::make_unique<OutlinerUndoChangeParaNumberingRestart>( this, nPara,
                pPara->GetNumberingStartValue(), nNumberingStartValue,
                pPara->IsParaIsNumberingRestart(), pPara->IsParaIsNumberingRestart() ) );

        pPara->SetNumberingStartValue( nNumberingStartValue );
        ImplCheckParagraphs( nPara, pParaList->GetParagraphCount() );
        pEditEngine->SetModified();
    }
}

bool Outliner::IsParaIsNumberingRestart( sal_Int32 nPara )
{
    Paragraph* pPara = pParaList->GetParagraph( nPara );
    DBG_ASSERT( pPara, "Outliner::IsParaIsNumberingRestart - Paragraph not found!" );
    return pPara && pPara->IsParaIsNumberingRestart();
}

void Outliner::SetParaIsNumberingRestart( sal_Int32 nPara, bool bParaIsNumberingRestart )
{
    Paragraph* pPara = pParaList->GetParagraph( nPara );
    DBG_ASSERT( pPara, "Outliner::SetParaIsNumberingRestart - Paragraph not found!" );
    if( pPara && (pPara->IsParaIsNumberingRestart() != bParaIsNumberingRestart) )
    {
        if( IsUndoEnabled() && !IsInUndo() )
            InsertUndo( std::make_unique<OutlinerUndoChangeParaNumberingRestart>( this, nPara,
                pPara->GetNumberingStartValue(), pPara->GetNumberingStartValue(),
                pPara->IsParaIsNumberingRestart(), bParaIsNumberingRestart ) );

        pPara->SetParaIsNumberingRestart( bParaIsNumberingRestart );
        ImplCheckParagraphs( nPara, pParaList->GetParagraphCount() );
        pEditEngine->SetModified();
    }
}

sal_Int32 Outliner::GetBulletsNumberingStatus(
    const sal_Int32 nParaStart,
    const sal_Int32 nParaEnd ) const
{
    if ( nParaStart > nParaEnd
         || nParaEnd >= pParaList->GetParagraphCount() )
    {
        SAL_WARN("editeng", "<Outliner::GetBulletsNumberingStatus> - unexpected parameter values" );
        return 2;
    }

    sal_Int32 nBulletsCount = 0;
    sal_Int32 nNumberingCount = 0;
    for (sal_Int32 nPara = nParaStart; nPara <= nParaEnd; ++nPara)
    {
        if ( !pParaList->GetParagraph(nPara) )
        {
            break;
        }
        const SvxNumberFormat* pFmt = GetNumberFormat(nPara);
        if (!pFmt)
        {
            // At least, exists one paragraph that has no Bullets/Numbering.
            break;
        }
        else if ((pFmt->GetNumberingType() == SVX_NUM_BITMAP) || (pFmt->GetNumberingType() == SVX_NUM_CHAR_SPECIAL))
        {
            // Having Bullets in this paragraph.
            nBulletsCount++;
        }
        else
        {
            // Having Numbering in this paragraph.
            nNumberingCount++;
        }
    }

    const sal_Int32 nParaCount = nParaEnd - nParaStart + 1;
    if ( nBulletsCount == nParaCount )
    {
        return 0;
    }
    else if ( nNumberingCount == nParaCount )
    {
        return 1;
    }
    return 2;
}

sal_Int32 Outliner::GetBulletsNumberingStatus() const
{
    return pParaList->GetParagraphCount() > 0
           ? GetBulletsNumberingStatus( 0, pParaList->GetParagraphCount()-1 )
           : 2;
}

std::unique_ptr<OutlinerParaObject> Outliner::CreateParaObject( sal_Int32 nStartPara, sal_Int32 nCount ) const
{
    if ( static_cast<sal_uLong>(nStartPara) + nCount >
            o3tl::make_unsigned(pParaList->GetParagraphCount()) )
        nCount = pParaList->GetParagraphCount() - nStartPara;

    // When a new OutlinerParaObject is created because a paragraph is just being deleted,
    // it can happen that the ParaList is not updated yet...
    if ( ( nStartPara + nCount ) > pEditEngine->GetParagraphCount() )
        nCount = pEditEngine->GetParagraphCount() - nStartPara;

    if (nCount <= 0)
        return nullptr;

    std::unique_ptr<EditTextObject> pText = pEditEngine->CreateTextObject( nStartPara, nCount );
    const bool bIsEditDoc(OutlinerMode::TextObject == ImplGetOutlinerMode());
    ParagraphDataVector aParagraphDataVector(nCount);
    const sal_Int32 nLastPara(nStartPara + nCount - 1);

    for(sal_Int32 nPara(nStartPara); nPara <= nLastPara; nPara++)
    {
        aParagraphDataVector[nPara-nStartPara] = *GetParagraph(nPara);
    }

    std::unique_ptr<OutlinerParaObject> pPObj(new OutlinerParaObject(*pText, aParagraphDataVector, bIsEditDoc));
    pPObj->SetOutlinerMode(GetMode());

    return pPObj;
}

void Outliner::SetToEmptyText()
{
    std::unique_ptr<OutlinerParaObject> pEmptyTxt = GetEmptyParaObject();
    SetText(*pEmptyTxt);
}

void Outliner::SetText( const OUString& rText, Paragraph* pPara )
{
    DBG_ASSERT(pPara,"SetText:No Para");

    const sal_Int32 nPara = pParaList->GetAbsPos( pPara );

    if (pEditEngine->GetText( nPara ) == rText)
    {
        // short-circuit logic to improve performance
        bFirstParaIsEmpty = false;
        return;
    }

    const bool bUpdate = pEditEngine->GetUpdateMode();
    pEditEngine->SetUpdateMode( false );
    ImplBlockInsertionCallbacks( true );

    if (rText.isEmpty())
    {
        pEditEngine->SetText( nPara, rText );
        ImplInitDepth( nPara, pPara->GetDepth(), false );
    }
    else
    {
        const OUString aText(convertLineEnd(rText, LINEEND_LF));

        sal_Int32 nPos = 0;
        sal_Int32 nInsPos = nPara+1;
        sal_Int32 nIdx {0};
        // Loop over all tokens, but ignore the last one if empty
        // (i.e. if strings ends with the delimiter, detected by
        // checking nIdx against string length). This check also
        // handle empty strings.
        while( nIdx>=0 && nIdx<aText.getLength() )
        {
            OUString aStr = aText.getToken( 0, '\x0A', nIdx );

            sal_Int16 nCurDepth;
            if( nPos )
            {
                pPara = new Paragraph( -1 );
                nCurDepth = -1;
            }
            else
                nCurDepth = pPara->GetDepth();

            // In the outliner mode, filter the tabs and set the indentation
            // about a LRSpaceItem. In EditEngine mode intend over old tabs
            if( ( ImplGetOutlinerMode() == OutlinerMode::OutlineObject ) ||
                ( ImplGetOutlinerMode() == OutlinerMode::OutlineView ) )
            {
                // Extract Tabs
                sal_Int32 nTabs = 0;
                while ( ( nTabs < aStr.getLength() ) && ( aStr[nTabs] == '\t' ) )
                    nTabs++;
                if ( nTabs )
                    aStr = aStr.copy(nTabs);

                // Keep depth?  (see Outliner::Insert)
                if( !(pPara->nFlags & ParaFlag::HOLDDEPTH) )
                {
                    nCurDepth = nTabs-1; //TODO: sal_Int32 -> sal_Int16!
                    ImplCheckDepth( nCurDepth );
                    pPara->SetDepth( nCurDepth );
                    pPara->nFlags &= ~ParaFlag::HOLDDEPTH;
                }
            }
            if( nPos ) // not with the first paragraph
            {
                pParaList->Insert( std::unique_ptr<Paragraph>(pPara), nInsPos );
                pEditEngine->InsertParagraph( nInsPos, aStr );
                ParagraphInsertedHdl(pPara);
            }
            else
            {
                nInsPos--;
                pEditEngine->SetText( nInsPos, aStr );
            }
            ImplInitDepth( nInsPos, nCurDepth, false );
            nInsPos++;
            nPos++;
        }
    }

    DBG_ASSERT(pParaList->GetParagraphCount()==pEditEngine->GetParagraphCount(),"SetText failed!");
    bFirstParaIsEmpty = false;
    ImplBlockInsertionCallbacks( false );
    // Restore the update mode.
    pEditEngine->SetUpdateMode(bUpdate, /*bRestoring=*/true);
}

// pView == 0 -> Ignore tabs

bool Outliner::ImpConvertEdtToOut( sal_Int32 nPara )
{

    bool bConverted = false;
    sal_Int32 nTabs = 0;
    ESelection aDelSel;

    OUString aName;
    OUString aHeading_US( "heading" );
    OUString aNumber_US( "Numbering" );

    OUString aStr( pEditEngine->GetText( nPara ) );
    const sal_Unicode* pPtr = aStr.getStr();

    sal_Int32 nHeadingNumberStart = 0;
    sal_Int32 nNumberingNumberStart = 0;
    SfxStyleSheet* pStyle= pEditEngine->GetStyleSheet( nPara );
    if( pStyle )
    {
        aName = pStyle->GetName();
        sal_Int32 nSearch;
        if ( ( nSearch = aName.indexOf( aHeading_US ) ) != -1 )
            nHeadingNumberStart = nSearch + aHeading_US.getLength();
        else if ( ( nSearch = aName.indexOf( aNumber_US ) ) != -1 )
            nNumberingNumberStart = nSearch + aNumber_US.getLength();
    }

    if ( nHeadingNumberStart || nNumberingNumberStart )
    {
        // PowerPoint import ?
        if( nHeadingNumberStart && ( aStr.getLength() >= 2 ) &&
                ( pPtr[0] != '\t' ) && ( pPtr[1] == '\t' ) )
        {
            // Extract Bullet and Tab
            aDelSel = ESelection( nPara, 0, nPara, 2 );
        }

        sal_Int32 nPos = nHeadingNumberStart ? nHeadingNumberStart : nNumberingNumberStart;
        OUString aLevel = comphelper::string::stripStart(aName.copy(nPos), ' ');
        nTabs = aLevel.toInt32();
        if( nTabs )
            nTabs--; // Level 0 = "heading 1"
        bConverted = true;
    }
    else
    {
        // filter leading tabs
        while( *pPtr == '\t' )
        {
            pPtr++;
            nTabs++;
        }
        // Remove tabs from the text
        if( nTabs )
            aDelSel = ESelection( nPara, 0, nPara, nTabs );
    }

    if ( aDelSel.HasRange() )
    {
        pEditEngine->QuickDelete( aDelSel );
    }

    const SfxInt16Item& rLevel = pEditEngine->GetParaAttrib( nPara, EE_PARA_OUTLLEVEL );
    sal_Int16 nOutlLevel = rLevel.GetValue();

    ImplCheckDepth( nOutlLevel );
    ImplInitDepth( nPara, nOutlLevel, false );

    return bConverted;
}

void Outliner::SetText( const OutlinerParaObject& rPObj )
{

    bool bUpdate = pEditEngine->GetUpdateMode();
    pEditEngine->SetUpdateMode( false );

    bool bUndo = pEditEngine->IsUndoEnabled();
    EnableUndo( false );

    Init( rPObj.GetOutlinerMode() );

    ImplBlockInsertionCallbacks( true );
    pEditEngine->SetText(rPObj.GetTextObject());

    bFirstParaIsEmpty = false;

    pParaList->Clear();
    for( sal_Int32 nCurPara = 0; nCurPara < rPObj.Count(); nCurPara++ )
    {
        std::unique_ptr<Paragraph> pPara(new Paragraph( rPObj.GetParagraphData(nCurPara)));
        ImplCheckDepth( pPara->nDepth );

        pParaList->Append(std::move(pPara));
        ImplCheckNumBulletItem( nCurPara );
    }

    ImplCheckParagraphs( 0, pParaList->GetParagraphCount() );

    EnableUndo( bUndo );
    ImplBlockInsertionCallbacks( false );
    pEditEngine->SetUpdateMode( bUpdate );

    DBG_ASSERT( pParaList->GetParagraphCount()==rPObj.Count(),"SetText failed");
    DBG_ASSERT( pEditEngine->GetParagraphCount()==rPObj.Count(),"SetText failed");
}

void Outliner::AddText( const OutlinerParaObject& rPObj, bool bAppend )
{

    bool bUpdate = pEditEngine->GetUpdateMode();
    pEditEngine->SetUpdateMode( false );

    ImplBlockInsertionCallbacks( true );
    sal_Int32 nPara;
    if( bFirstParaIsEmpty )
    {
        pParaList->Clear();
        pEditEngine->SetText(rPObj.GetTextObject());
        nPara = 0;
        bAppend = false;
    }
    else
    {
        nPara = pParaList->GetParagraphCount();
        pEditEngine->InsertParagraph( EE_PARA_APPEND, rPObj.GetTextObject(), bAppend );
    }
    bFirstParaIsEmpty = false;

    for( sal_Int32 n = 0; n < rPObj.Count(); n++ )
    {
        if ( n == 0 && bAppend )
        {
            // This first "paragraph" was just appended to an existing (incomplete) paragraph.
            // Since no new paragraph will be added, the assumed increase-by-1 also won't happen.
            --nPara;
            continue;
        }

        Paragraph* pPara = new Paragraph( rPObj.GetParagraphData(n) );
        pParaList->Append(std::unique_ptr<Paragraph>(pPara));
        sal_Int32 nP = nPara+n;
        DBG_ASSERT(pParaList->GetAbsPos(pPara)==nP,"AddText:Out of sync");
        ImplInitDepth( nP, pPara->GetDepth(), false );
    }
    DBG_ASSERT( pEditEngine->GetParagraphCount()==pParaList->GetParagraphCount(), "SetText: OutOfSync" );

    ImplCheckParagraphs( nPara, pParaList->GetParagraphCount() );

    ImplBlockInsertionCallbacks( false );
    pEditEngine->SetUpdateMode( bUpdate );
}

OUString Outliner::CalcFieldValue( const SvxFieldItem& rField, sal_Int32 nPara, sal_Int32 nPos, std::optional<Color>& rpTxtColor, std::optional<Color>& rpFldColor )
{
    if ( !aCalcFieldValueHdl.IsSet() )
        return OUString( ' ' );

    EditFieldInfo aFldInfo( this, rField, nPara, nPos );
    // The FldColor is preset with COL_LIGHTGRAY.
    if ( rpFldColor )
        aFldInfo.SetFieldColor( *rpFldColor );

    aCalcFieldValueHdl.Call( &aFldInfo );
    if ( aFldInfo.GetTextColor() )
    {
        rpTxtColor = *aFldInfo.GetTextColor();
    }

    if (aFldInfo.GetFieldColor())
        rpFldColor = *aFldInfo.GetFieldColor();
    else
        rpFldColor.reset();

    return aFldInfo.GetRepresentation();
}

void Outliner::SetStyleSheet( sal_Int32 nPara, SfxStyleSheet* pStyle )
{
    Paragraph* pPara = pParaList->GetParagraph( nPara );
    if (pPara)
    {
        pEditEngine->SetStyleSheet( nPara, pStyle );
        pPara->nFlags |= ParaFlag::SETBULLETTEXT;
        ImplCheckNumBulletItem(  nPara );
    }
}

void Outliner::ImplCheckNumBulletItem( sal_Int32 nPara )
{
    Paragraph* pPara = pParaList->GetParagraph( nPara );
    if (pPara)
        pPara->aBulSize.setWidth( -1 );
}

void Outliner::ImplSetLevelDependentStyleSheet( sal_Int32 nPara )
{

    DBG_ASSERT( ( ImplGetOutlinerMode() == OutlinerMode::OutlineObject ) || ( ImplGetOutlinerMode() == OutlinerMode::OutlineView ), "SetLevelDependentStyleSheet: Wrong Mode!" );

    SfxStyleSheet* pStyle = GetStyleSheet( nPara );

    if ( !pStyle )
        return;

    sal_Int16 nDepth = GetDepth( nPara );
    if( nDepth < 0 )
        nDepth = 0;

    OUString aNewStyleSheetName( pStyle->GetName() );
    aNewStyleSheetName = aNewStyleSheetName.copy( 0, aNewStyleSheetName.getLength()-1 ) +
        OUString::number( nDepth+1 );
    SfxStyleSheet* pNewStyle = static_cast<SfxStyleSheet*>(GetStyleSheetPool()->Find( aNewStyleSheetName, pStyle->GetFamily() ));
    DBG_ASSERT( pNewStyle, "AutoStyleSheetName - Style not found!" );
    if ( pNewStyle && ( pNewStyle != GetStyleSheet( nPara ) ) )
    {
        SfxItemSet aOldAttrs( GetParaAttribs( nPara ) );
        SetStyleSheet( nPara, pNewStyle );
        if ( aOldAttrs.GetItemState( EE_PARA_NUMBULLET ) == SfxItemState::SET )
        {
            SfxItemSet aAttrs( GetParaAttribs( nPara ) );
            aAttrs.Put( aOldAttrs.Get( EE_PARA_NUMBULLET ) );
            SetParaAttribs( nPara, aAttrs );
        }
    }
}

void Outliner::ImplInitDepth( sal_Int32 nPara, sal_Int16 nDepth, bool bCreateUndo )
{

    DBG_ASSERT( ( nDepth >= gnMinDepth ) && ( nDepth <= nMaxDepth ), "ImplInitDepth - Depth is invalid!" );

    Paragraph* pPara = pParaList->GetParagraph( nPara );
    if (!pPara)
        return;
    sal_Int16 nOldDepth = pPara->GetDepth();
    pPara->SetDepth( nDepth );

    // For IsInUndo attributes and style do not have to be set, there
    // the old values are restored by the EditEngine.
    if( IsInUndo() )
        return;

    bool bUpdate = pEditEngine->GetUpdateMode();
    pEditEngine->SetUpdateMode( false );

    bool bUndo = bCreateUndo && IsUndoEnabled();

    SfxItemSet aAttrs( pEditEngine->GetParaAttribs( nPara ) );
    aAttrs.Put( SfxInt16Item( EE_PARA_OUTLLEVEL, nDepth ) );
    pEditEngine->SetParaAttribs( nPara, aAttrs );
    ImplCheckNumBulletItem( nPara );
    ImplCalcBulletText( nPara, false, false );

    if ( bUndo )
    {
        InsertUndo( std::make_unique<OutlinerUndoChangeDepth>( this, nPara, nOldDepth, nDepth ) );
    }

    pEditEngine->SetUpdateMode( bUpdate );
}

void Outliner::SetParaAttribs( sal_Int32 nPara, const SfxItemSet& rSet )
{

    pEditEngine->SetParaAttribs( nPara, rSet );
}

void Outliner::SetCharAttribs(sal_Int32 nPara, const SfxItemSet& rSet)
{
    pEditEngine->SetCharAttribs(nPara, rSet);
}

bool Outliner::Expand( Paragraph const * pPara )
{
    if ( pParaList->HasHiddenChildren( pPara ) )
    {
        std::unique_ptr<OLUndoExpand> pUndo;
        bool bUndo = IsUndoEnabled() && !IsInUndo();
        if( bUndo )
        {
            UndoActionStart( OLUNDO_EXPAND );
            pUndo.reset( new OLUndoExpand( this, OLUNDO_EXPAND ) );
            pUndo->nCount = pParaList->GetAbsPos( pPara );
        }
        pParaList->Expand( pPara );
        InvalidateBullet(pParaList->GetAbsPos(pPara));
        if( bUndo )
        {
            InsertUndo( std::move(pUndo) );
            UndoActionEnd();
        }
        return true;
    }
    return false;
}

bool Outliner::Collapse( Paragraph const * pPara )
{
    if ( pParaList->HasVisibleChildren( pPara ) ) // expanded
    {
        std::unique_ptr<OLUndoExpand> pUndo;
        bool bUndo = false;

        if( !IsInUndo() && IsUndoEnabled() )
            bUndo = true;
        if( bUndo )
        {
            UndoActionStart( OLUNDO_COLLAPSE );
            pUndo.reset( new OLUndoExpand( this, OLUNDO_COLLAPSE ) );
            pUndo->nCount = pParaList->GetAbsPos( pPara );
        }

        pParaList->Collapse( pPara );
        InvalidateBullet(pParaList->GetAbsPos(pPara));
        if( bUndo )
        {
            InsertUndo( std::move(pUndo) );
            UndoActionEnd();
        }
        return true;
    }
    return false;
}


vcl::Font Outliner::ImpCalcBulletFont( sal_Int32 nPara ) const
{
    const SvxNumberFormat* pFmt = GetNumberFormat( nPara );
    DBG_ASSERT( pFmt && ( pFmt->GetNumberingType() != SVX_NUM_BITMAP ) && ( pFmt->GetNumberingType() != SVX_NUM_NUMBER_NONE ), "ImpCalcBulletFont: Missing or BitmapBullet!" );

    vcl::Font aStdFont;
    if ( !pEditEngine->IsFlatMode() )
    {
        ESelection aSel( nPara, 0, nPara, 0 );
        aStdFont = EditEngine::CreateFontFromItemSet( pEditEngine->GetAttribs( aSel ), pEditEngine->GetScriptType( aSel ) );
    }
    else
    {
        aStdFont = pEditEngine->GetStandardFont( nPara );
    }

    vcl::Font aBulletFont;
    const vcl::Font *pSourceFont = nullptr;
    if ( pFmt->GetNumberingType() == SVX_NUM_CHAR_SPECIAL )
    {
        pSourceFont = pFmt->GetBulletFont();
    }

    if (pSourceFont)
    {
        aBulletFont = *pSourceFont;
    }
    else
    {
        aBulletFont = aStdFont;
        aBulletFont.SetUnderline( LINESTYLE_NONE );
        aBulletFont.SetOverline( LINESTYLE_NONE );
        aBulletFont.SetStrikeout( STRIKEOUT_NONE );
        aBulletFont.SetEmphasisMark( FontEmphasisMark::NONE );
        aBulletFont.SetRelief( FontRelief::NONE );
    }

    // Use original scale...
    sal_uInt16 nStretchX, nStretchY;
    GetGlobalCharStretching(nStretchX, nStretchY);

    sal_uInt16 nScale = pFmt->GetBulletRelSize() * nStretchY / 100;
    sal_uLong nScaledLineHeight = aStdFont.GetFontSize().Height();
    nScaledLineHeight *= nScale*10;
    nScaledLineHeight /= 1000;

    aBulletFont.SetAlignment( ALIGN_BOTTOM );
    aBulletFont.SetFontSize( Size( 0, nScaledLineHeight ) );
    bool bVertical = IsVertical();
    aBulletFont.SetVertical( bVertical );
    aBulletFont.SetOrientation( bVertical ? (IsTopToBottom() ? 2700 : 900) : 0 );

    Color aColor( COL_AUTO );
    if( !pEditEngine->IsFlatMode() && !( pEditEngine->GetControlWord() & EEControlBits::NOCOLORS ) )
    {
        aColor = pFmt->GetBulletColor();
    }

    if ( ( aColor == COL_AUTO ) || ( IsForceAutoColor() ) )
        aColor = pEditEngine->GetAutoColor();

    aBulletFont.SetColor( aColor );
    return aBulletFont;
}

void Outliner::PaintBullet( sal_Int32 nPara, const Point& rStartPos,
    const Point& rOrigin, short nOrientation, OutputDevice* pOutDev )
{

    bool bDrawBullet = false;
    if (pEditEngine)
    {
        const SfxBoolItem& rBulletState = pEditEngine->GetParaAttrib( nPara, EE_PARA_BULLETSTATE );
        bDrawBullet = rBulletState.GetValue();
    }

    if (!(bDrawBullet && ImplHasNumberFormat(nPara)))
        return;

    bool bVertical = IsVertical();
    bool bTopToBottom = IsTopToBottom();

    bool bRightToLeftPara = pEditEngine->IsRightToLeft( nPara );

    tools::Rectangle aBulletArea( ImpCalcBulletArea( nPara, true, false ) );
    sal_uInt16 nStretchX, nStretchY;
    GetGlobalCharStretching(nStretchX, nStretchY);
    aBulletArea = tools::Rectangle( Point(aBulletArea.Left()*nStretchX/100,
                                   aBulletArea.Top()),
                             Size(aBulletArea.GetWidth()*nStretchX/100,
                                  aBulletArea.GetHeight()) );

    Paragraph* pPara = pParaList->GetParagraph( nPara );
    const SvxNumberFormat* pFmt = GetNumberFormat( nPara );
    if ( pFmt && ( pFmt->GetNumberingType() != SVX_NUM_NUMBER_NONE ) )
    {
        if( pFmt->GetNumberingType() != SVX_NUM_BITMAP )
        {
            vcl::Font aBulletFont( ImpCalcBulletFont( nPara ) );
            // Use baseline
            bool bSymbol = pFmt->GetNumberingType() == SVX_NUM_CHAR_SPECIAL;
            aBulletFont.SetAlignment( bSymbol ? ALIGN_BOTTOM : ALIGN_BASELINE );
            vcl::Font aOldFont = pOutDev->GetFont();
            pOutDev->SetFont( aBulletFont );

            ParagraphInfos  aParaInfos = pEditEngine->GetParagraphInfos( nPara );
            Point aTextPos;
            if ( !bVertical )
            {
//                  aTextPos.Y() = rStartPos.Y() + aBulletArea.Bottom();
                aTextPos.setY( rStartPos.Y() + ( bSymbol ? aBulletArea.Bottom() : aParaInfos.nFirstLineMaxAscent ) );
                if ( !bRightToLeftPara )
                    aTextPos.setX( rStartPos.X() + aBulletArea.Left() );
                else
                    aTextPos.setX( rStartPos.X() + GetPaperSize().Width() - aBulletArea.Right() );
            }
            else
            {
                if (bTopToBottom)
                {
//                      aTextPos.X() = rStartPos.X() - aBulletArea.Bottom();
                    aTextPos.setX( rStartPos.X() - (bSymbol ? aBulletArea.Bottom() : aParaInfos.nFirstLineMaxAscent) );
                    aTextPos.setY( rStartPos.Y() + aBulletArea.Left() );
                }
                else
                {
                    aTextPos.setX( rStartPos.X() + (bSymbol ? aBulletArea.Bottom() : aParaInfos.nFirstLineMaxAscent) );
                    aTextPos.setY( rStartPos.Y() + aBulletArea.Left() );
                }
            }

            if ( nOrientation )
            {
                // Both TopLeft and bottom left is not quite correct,
                // since in EditEngine baseline ...
                double nRealOrientation = nOrientation*F_PI1800;
                double nCos = cos( nRealOrientation );
                double nSin = sin( nRealOrientation );
                Point aRotatedPos;
                // Translation...
                aTextPos -= rOrigin;
                // Rotation...
                aRotatedPos.setX(static_cast<long>(nCos*aTextPos.X() + nSin*aTextPos.Y()) );
                aRotatedPos.setY(static_cast<long>(- (nSin*aTextPos.X() - nCos*aTextPos.Y())) );
                aTextPos = aRotatedPos;
                // Translation...
                aTextPos += rOrigin;
                vcl::Font aRotatedFont( aBulletFont );
                aRotatedFont.SetOrientation( nOrientation );
                pOutDev->SetFont( aRotatedFont );
            }

            // VCL will take care of brackets and so on...
            ComplexTextLayoutFlags nLayoutMode = pOutDev->GetLayoutMode();
            nLayoutMode &= ~ComplexTextLayoutFlags(ComplexTextLayoutFlags::BiDiRtl|ComplexTextLayoutFlags::BiDiStrong);
            if ( bRightToLeftPara )
                nLayoutMode |= ComplexTextLayoutFlags::BiDiRtl | ComplexTextLayoutFlags::TextOriginLeft | ComplexTextLayoutFlags::BiDiStrong;
            pOutDev->SetLayoutMode( nLayoutMode );

            if(bStrippingPortions)
            {
                const vcl::Font& aSvxFont(pOutDev->GetFont());
                std::unique_ptr<long[]> pBuf(new long[ pPara->GetText().getLength() ]);
                pOutDev->GetTextArray( pPara->GetText(), pBuf.get() );

                if(bSymbol)
                {
                    // aTextPos is Bottom, go to Baseline
                    FontMetric aMetric(pOutDev->GetFontMetric());
                    aTextPos.AdjustY( -(aMetric.GetDescent()) );
                }

                DrawingText(aTextPos, pPara->GetText(), 0, pPara->GetText().getLength(), pBuf.get(),
                    aSvxFont, nPara, bRightToLeftPara ? 1 : 0, nullptr, nullptr, false, false, true, nullptr, Color(), Color());
            }
            else
            {
                pOutDev->DrawText( aTextPos, pPara->GetText() );
            }

            pOutDev->SetFont( aOldFont );
        }
        else
        {
            if ( pFmt->GetBrush()->GetGraphicObject() )
            {
                Point aBulletPos;
                if ( !bVertical )
                {
                    aBulletPos.setY( rStartPos.Y() + aBulletArea.Top() );
                    if ( !bRightToLeftPara )
                        aBulletPos.setX( rStartPos.X() + aBulletArea.Left() );
                    else
                        aBulletPos.setX( rStartPos.X() + GetPaperSize().Width() - aBulletArea.Right() );
                }
                else
                {
                    if (bTopToBottom)
                    {
                        aBulletPos.setX( rStartPos.X() - aBulletArea.Bottom() );
                        aBulletPos.setY( rStartPos.Y() + aBulletArea.Left() );
                    }
                    else
                    {
                        aBulletPos.setX( rStartPos.X() + aBulletArea.Top() );
                        aBulletPos.setY( rStartPos.Y() - aBulletArea.Right() );
                    }
                }

                if(bStrippingPortions)
                {
                    if(aDrawBulletHdl.IsSet())
                    {
                        // call something analog to aDrawPortionHdl (if set) and feed it something
                        // analog to DrawPortionInfo...
                        // created aDrawBulletHdl, Set/GetDrawBulletHdl.
                        // created DrawBulletInfo and added handling to sdrtextdecomposition.cxx
                        DrawBulletInfo aDrawBulletInfo(
                            *pFmt->GetBrush()->GetGraphicObject(),
                            aBulletPos,
                            pPara->aBulSize);

                        aDrawBulletHdl.Call(&aDrawBulletInfo);
                    }
                }
                else
                {
                    // Remove CAST when KA made the Draw-Method const
                    const_cast<GraphicObject*>(pFmt->GetBrush()->GetGraphicObject())->Draw( pOutDev, aBulletPos, pPara->aBulSize );
                }
            }
        }
    }

    // In case of collapsed subparagraphs paint a line before the text.
    if( !(pParaList->HasChildren(pPara) && !pParaList->HasVisibleChildren(pPara) &&
            !bStrippingPortions && !nOrientation) )
        return;

    long nWidth = pOutDev->PixelToLogic( Size( 10, 0 ) ).Width();

    Point aStartPos, aEndPos;
    if ( !bVertical )
    {
        aStartPos.setY( rStartPos.Y() + aBulletArea.Bottom() );
        if ( !bRightToLeftPara )
            aStartPos.setX( rStartPos.X() + aBulletArea.Right() );
        else
            aStartPos.setX( rStartPos.X() + GetPaperSize().Width() - aBulletArea.Left() );
        aEndPos = aStartPos;
        aEndPos.AdjustX(nWidth );
    }
    else
    {
        aStartPos.setX( rStartPos.X() - aBulletArea.Bottom() );
        aStartPos.setY( rStartPos.Y() + aBulletArea.Right() );
        aEndPos = aStartPos;
        aEndPos.AdjustY(nWidth );
    }

    const Color& rOldLineColor = pOutDev->GetLineColor();
    pOutDev->SetLineColor( COL_BLACK );
    pOutDev->DrawLine( aStartPos, aEndPos );
    pOutDev->SetLineColor( rOldLineColor );
}

void Outliner::InvalidateBullet(sal_Int32 nPara)
{
    long nLineHeight = static_cast<long>(pEditEngine->GetLineHeight(nPara ));
    for (OutlinerView* pView : aViewList)
    {
        Point aPos( pView->pEditView->GetWindowPosTopLeft(nPara ) );
        tools::Rectangle aRect( pView->GetOutputArea() );
        aRect.SetRight( aPos.X() );
        aRect.SetTop( aPos.Y() );
        aRect.SetBottom( aPos.Y() );
        aRect.AdjustBottom(nLineHeight );

        pView->GetWindow()->Invalidate( aRect );
    }
}

ErrCode Outliner::Read( SvStream& rInput, const OUString& rBaseURL, EETextFormat eFormat, SvKeyValueIterator* pHTTPHeaderAttrs )
{

    bool bOldUndo = pEditEngine->IsUndoEnabled();
    EnableUndo( false );

    bool bUpdate = pEditEngine->GetUpdateMode();
    pEditEngine->SetUpdateMode( false );

    Clear();

    ImplBlockInsertionCallbacks( true );
    ErrCode nRet = pEditEngine->Read( rInput, rBaseURL, eFormat, pHTTPHeaderAttrs );

    bFirstParaIsEmpty = false;

    sal_Int32 nParas = pEditEngine->GetParagraphCount();
    pParaList->Clear();
    for ( sal_Int32 n = 0; n < nParas; n++ )
    {
        std::unique_ptr<Paragraph> pPara(new Paragraph( 0 ));
        pParaList->Append(std::move(pPara));
    }

    ImpFilterIndents( 0, nParas-1 );

    ImplBlockInsertionCallbacks( false );
    pEditEngine->SetUpdateMode( bUpdate );
    EnableUndo( bOldUndo );

    return nRet;
}


void Outliner::ImpFilterIndents( sal_Int32 nFirstPara, sal_Int32 nLastPara )
{

    bool bUpdate = pEditEngine->GetUpdateMode();
    pEditEngine->SetUpdateMode( false );

    Paragraph* pLastConverted = nullptr;
    for( sal_Int32 nPara = nFirstPara; nPara <= nLastPara; nPara++ )
    {
        Paragraph* pPara = pParaList->GetParagraph( nPara );
        if (pPara)
        {
                    if( ImpConvertEdtToOut( nPara ) )
                    {
                            pLastConverted = pPara;
                    }
                    else if ( pLastConverted )
                    {
                            // Arrange normal paragraphs below the heading ...
                            pPara->SetDepth( pLastConverted->GetDepth() );
                    }

                    ImplInitDepth( nPara, pPara->GetDepth(), false );
        }
    }

    pEditEngine->SetUpdateMode( bUpdate );
}

SfxUndoManager& Outliner::GetUndoManager()
{
    return pEditEngine->GetUndoManager();
}

SfxUndoManager* Outliner::SetUndoManager(SfxUndoManager* pNew)
{
    return pEditEngine->SetUndoManager(pNew);
}

void Outliner::ImpTextPasted( sal_Int32 nStartPara, sal_Int32 nCount )
{

    bool bUpdate = pEditEngine->GetUpdateMode();
    pEditEngine->SetUpdateMode( false );

    const sal_Int32 nStart = nStartPara;

    Paragraph* pPara = pParaList->GetParagraph( nStartPara );

    while( nCount && pPara )
    {
        if( ImplGetOutlinerMode() != OutlinerMode::TextObject )
        {
            nDepthChangedHdlPrevDepth = pPara->GetDepth();
            ParaFlag nPrevFlags = pPara->nFlags;

            ImpConvertEdtToOut( nStartPara );

            if( nStartPara == nStart )
            {
                // the existing paragraph has changed depth or flags
                if( (pPara->GetDepth() != nDepthChangedHdlPrevDepth) || (pPara->nFlags != nPrevFlags) )
                    DepthChangedHdl(pPara, nPrevFlags);
            }
        }
        else // EditEngine mode
        {
            sal_Int16 nDepth = -1;
            const SfxItemSet& rAttrs = pEditEngine->GetParaAttribs( nStartPara );
            if ( rAttrs.GetItemState( EE_PARA_OUTLLEVEL ) == SfxItemState::SET )
            {
                const SfxInt16Item& rLevel = rAttrs.Get( EE_PARA_OUTLLEVEL );
                nDepth = rLevel.GetValue();
            }
            if ( nDepth != GetDepth( nStartPara ) )
                ImplInitDepth( nStartPara, nDepth, false );
        }

        nCount--;
        nStartPara++;
        pPara = pParaList->GetParagraph( nStartPara );
    }

    pEditEngine->SetUpdateMode( bUpdate );

    DBG_ASSERT(pParaList->GetParagraphCount()==pEditEngine->GetParagraphCount(),"ImpTextPasted failed");
}

bool Outliner::IndentingPagesHdl( OutlinerView* pView )
{
    if( !aIndentingPagesHdl.IsSet() )
        return true;
    return aIndentingPagesHdl.Call( pView );
}

bool Outliner::ImpCanIndentSelectedPages( OutlinerView* pCurView )
{
    // The selected pages must already be set in advance through
    // ImpCalcSelectedPages

    // If the first paragraph is on level 0 it can not indented in any case,
    // possible there might be indentations in the following on the 0 level.
    if ( ( mnFirstSelPage == 0 ) && ( ImplGetOutlinerMode() != OutlinerMode::TextObject ) )
    {
        if ( nDepthChangedHdlPrevDepth == 1 )   // is the only page
            return false;
        else
            (void)pCurView->ImpCalcSelectedPages( false );  // without the first
    }
    return IndentingPagesHdl( pCurView );
}


bool Outliner::ImpCanDeleteSelectedPages( OutlinerView* pCurView )
{
    // The selected pages must already be set in advance through
    // ImpCalcSelectedPages
    return RemovingPagesHdl( pCurView );
}

Outliner::Outliner(SfxItemPool* pPool, OutlinerMode nMode)
    : mnFirstSelPage(0)
    , nDepthChangedHdlPrevDepth(0)
    , nMaxDepth(9)
    , bFirstParaIsEmpty(true)
    , nBlockInsCallback(0)
    , bStrippingPortions(false)
    , bPasting(false)
{

    pParaList.reset( new ParagraphList );
    pParaList->SetVisibleStateChangedHdl( LINK( this, Outliner, ParaVisibleStateChangedHdl ) );
    std::unique_ptr<Paragraph> pPara(new Paragraph( 0 ));
    pParaList->Append(std::move(pPara));

    pEditEngine.reset( new OutlinerEditEng( this, pPool ) );
    pEditEngine->SetBeginMovingParagraphsHdl( LINK( this, Outliner, BeginMovingParagraphsHdl ) );
    pEditEngine->SetEndMovingParagraphsHdl( LINK( this, Outliner, EndMovingParagraphsHdl ) );
    pEditEngine->SetBeginPasteOrDropHdl( LINK( this, Outliner, BeginPasteOrDropHdl ) );
    pEditEngine->SetEndPasteOrDropHdl( LINK( this, Outliner, EndPasteOrDropHdl ) );

    Init( nMode );
}

Outliner::~Outliner()
{
    pParaList->Clear();
    pParaList.reset();
    pEditEngine.reset();
}

size_t Outliner::InsertView( OutlinerView* pView, size_t nIndex )
{
    size_t ActualIndex;

    if ( nIndex >= aViewList.size() )
    {
        aViewList.push_back( pView );
        ActualIndex = aViewList.size() - 1;
    }
    else
    {
        ViewList::iterator it = aViewList.begin();
        advance( it, nIndex );
        ActualIndex = nIndex;
    }
    pEditEngine->InsertView(  pView->pEditView.get(), nIndex );
    return ActualIndex;
}

void Outliner::RemoveView( OutlinerView const * pView )
{
    ViewList::iterator it = std::find(aViewList.begin(), aViewList.end(), pView);
    if (it != aViewList.end())
    {
        pView->pEditView->HideCursor(); // HACK
        pEditEngine->RemoveView(  pView->pEditView.get() );
        aViewList.erase( it );
    }
}

void Outliner::RemoveView( size_t nIndex )
{
    EditView* pEditView = pEditEngine->GetView( nIndex );
    pEditView->HideCursor(); // HACK

    pEditEngine->RemoveView( nIndex );

    {
        ViewList::iterator it = aViewList.begin();
        advance( it, nIndex );
        aViewList.erase( it );
    }
}


OutlinerView* Outliner::GetView( size_t nIndex ) const
{
    return ( nIndex >= aViewList.size() ) ? nullptr : aViewList[ nIndex ];
}

size_t Outliner::GetViewCount() const
{
    return aViewList.size();
}

void Outliner::ParagraphInsertedHdl(Paragraph* pPara)
{
    if( !IsInUndo() )
        aParaInsertedHdl.Call( { this, pPara } );
}


void Outliner::DepthChangedHdl(Paragraph* pPara, ParaFlag nPrevFlags)
{
    if( !IsInUndo() )
        aDepthChangedHdl.Call( { this, pPara, nPrevFlags } );
}


sal_Int32 Outliner::GetAbsPos( Paragraph const * pPara )
{
    DBG_ASSERT(pPara,"GetAbsPos:No Para");
    return pParaList->GetAbsPos( pPara );
}

sal_Int32 Outliner::GetParagraphCount() const
{
    return pParaList->GetParagraphCount();
}

Paragraph* Outliner::GetParagraph( sal_Int32 nAbsPos ) const
{
    return pParaList->GetParagraph( nAbsPos );
}

bool Outliner::HasChildren( Paragraph const * pParagraph ) const
{
    return pParaList->HasChildren( pParagraph );
}

bool Outliner::ImplHasNumberFormat( sal_Int32 nPara ) const
{
    return GetNumberFormat(nPara) != nullptr;
}

const SvxNumberFormat* Outliner::GetNumberFormat( sal_Int32 nPara ) const
{
    const SvxNumberFormat* pFmt = nullptr;

    Paragraph* pPara = pParaList->GetParagraph( nPara );
    if (!pPara)
        return nullptr;

    sal_Int16 nDepth = pPara->GetDepth();

    if( nDepth >= 0 )
    {
        const SvxNumBulletItem& rNumBullet = pEditEngine->GetParaAttrib( nPara, EE_PARA_NUMBULLET );
        if ( rNumBullet.GetNumRule()->GetLevelCount() > nDepth )
            pFmt = rNumBullet.GetNumRule()->Get( nDepth );
    }

    return pFmt;
}

Size Outliner::ImplGetBulletSize( sal_Int32 nPara )
{
    Paragraph* pPara = pParaList->GetParagraph( nPara );
    if (!pPara)
        return Size();

    if( pPara->aBulSize.Width() == -1 )
    {
        const SvxNumberFormat* pFmt = GetNumberFormat( nPara );
        DBG_ASSERT( pFmt, "ImplGetBulletSize - no Bullet!" );

        if ( pFmt->GetNumberingType() == SVX_NUM_NUMBER_NONE )
        {
            pPara->aBulSize = Size( 0, 0 );
        }
        else if( pFmt->GetNumberingType() != SVX_NUM_BITMAP )
        {
            OUString aBulletText = ImplGetBulletText( nPara );
            OutputDevice* pRefDev = pEditEngine->GetRefDevice();
            vcl::Font aBulletFont( ImpCalcBulletFont( nPara ) );
            vcl::Font aRefFont( pRefDev->GetFont());
            pRefDev->SetFont( aBulletFont );
            pPara->aBulSize.setWidth( pRefDev->GetTextWidth( aBulletText ) );
            pPara->aBulSize.setHeight( pRefDev->GetTextHeight() );
            pRefDev->SetFont( aRefFont );
        }
        else
        {
            pPara->aBulSize = OutputDevice::LogicToLogic(pFmt->GetGraphicSize(),
                    MapMode(MapUnit::Map100thMM),
                    pEditEngine->GetRefDevice()->GetMapMode());
        }
    }

    return pPara->aBulSize;
}

void Outliner::ImplCheckParagraphs( sal_Int32 nStart, sal_Int32 nEnd )
{

    for ( sal_Int32 n = nStart; n < nEnd; n++ )
    {
        Paragraph* pPara = pParaList->GetParagraph( n );
        if (pPara)
        {
            pPara->Invalidate();
            ImplCalcBulletText( n, false, false );
        }
    }
}

void Outliner::SetRefDevice( OutputDevice* pRefDev )
{
    pEditEngine->SetRefDevice( pRefDev );
    for ( sal_Int32 n = pParaList->GetParagraphCount(); n; )
    {
        Paragraph* pPara = pParaList->GetParagraph( --n );
        pPara->Invalidate();
    }
}

void Outliner::ParaAttribsChanged( sal_Int32 nPara )
{
    // The Outliner does not have an undo of its own, when paragraphs are
    // separated/merged. When ParagraphInserted the attribute EE_PARA_OUTLLEVEL
    // may not be set, this is however needed when the depth of the paragraph
    // is to be determined.
    if (!pEditEngine->IsInUndo())
        return;
    if (pParaList->GetParagraphCount() != pEditEngine->GetParagraphCount())
        return;
    Paragraph* pPara = pParaList->GetParagraph(nPara);
    if (!pPara)
        return;
    // tdf#100734: force update of bullet
    pPara->Invalidate();
    const SfxInt16Item& rLevel = pEditEngine->GetParaAttrib( nPara, EE_PARA_OUTLLEVEL );
    if (pPara->GetDepth() == rLevel.GetValue())
        return;
    pPara->SetDepth(rLevel.GetValue());
    ImplCalcBulletText(nPara, true, true);
}

void Outliner::StyleSheetChanged( SfxStyleSheet const * pStyle )
{

    // The EditEngine calls StyleSheetChanged also for derived styles.
    // Here all the paragraphs, which had the said template, used to be
    // hunted by an ImpRecalcParaAttribs, why?
    // => only the Bullet-representation can really change...
    sal_Int32 nParas = pParaList->GetParagraphCount();
    for( sal_Int32 nPara = 0; nPara < nParas; nPara++ )
    {
        if ( pEditEngine->GetStyleSheet( nPara ) == pStyle )
        {
            ImplCheckNumBulletItem( nPara );
            ImplCalcBulletText( nPara, false, false );
            // EditEngine formats changed paragraphs before calling this method,
            // so they are not reformatted now and use wrong bullet indent
            pEditEngine->QuickMarkInvalid( ESelection( nPara, 0, nPara, 0 ) );
        }
    }
}

tools::Rectangle Outliner::ImpCalcBulletArea( sal_Int32 nPara, bool bAdjust, bool bReturnPaperPos )
{
    // Bullet area within the paragraph ...
    tools::Rectangle aBulletArea;

    const SvxNumberFormat* pFmt = GetNumberFormat( nPara );
    if ( pFmt )
    {
        Point aTopLeft;
        Size aBulletSize( ImplGetBulletSize( nPara ) );

        bool bOutlineMode = bool( pEditEngine->GetControlWord() & EEControlBits::OUTLINER );

        // the ODF attribute text:space-before which holds the spacing to add to the left of the label
        const auto nSpaceBefore = pFmt->GetAbsLSpace() + pFmt->GetFirstLineOffset();

        const SvxLRSpaceItem& rLR = pEditEngine->GetParaAttrib( nPara, bOutlineMode ? EE_PARA_OUTLLRSPACE : EE_PARA_LRSPACE );
        aTopLeft.setX( rLR.GetTextLeft() + rLR.GetTextFirstLineOffset() + nSpaceBefore );

        long nBulletWidth = std::max( static_cast<long>(-rLR.GetTextFirstLineOffset()), static_cast<long>((-pFmt->GetFirstLineOffset()) + pFmt->GetCharTextDistance()) );
        if ( nBulletWidth < aBulletSize.Width() )   // The Bullet creates its space
            nBulletWidth = aBulletSize.Width();

        if ( bAdjust && !bOutlineMode )
        {
            // Adjust when centered or align right
            const SvxAdjustItem& rItem = pEditEngine->GetParaAttrib( nPara, EE_PARA_JUST );
            if ( ( !pEditEngine->IsRightToLeft( nPara ) && ( rItem.GetAdjust() != SvxAdjust::Left ) ) ||
                 ( pEditEngine->IsRightToLeft( nPara ) && ( rItem.GetAdjust() != SvxAdjust::Right ) ) )
            {
                aTopLeft.setX( pEditEngine->GetFirstLineStartX( nPara ) - nBulletWidth );
            }
        }

        // Vertical:
        ParagraphInfos aInfos = pEditEngine->GetParagraphInfos( nPara );
        if ( aInfos.bValid )
        {
            aTopLeft.setY( /* aInfos.nFirstLineOffset + */ // nFirstLineOffset is already added to the StartPos (PaintBullet) from the EditEngine
                            aInfos.nFirstLineHeight - aInfos.nFirstLineTextHeight
                            + aInfos.nFirstLineTextHeight / 2
                            - aBulletSize.Height() / 2 );
            // may prefer to print out on the baseline ...
            if( ( pFmt->GetNumberingType() != SVX_NUM_NUMBER_NONE ) && ( pFmt->GetNumberingType() != SVX_NUM_BITMAP ) && ( pFmt->GetNumberingType() != SVX_NUM_CHAR_SPECIAL ) )
            {
                vcl::Font aBulletFont( ImpCalcBulletFont( nPara ) );
                if ( aBulletFont.GetCharSet() != RTL_TEXTENCODING_SYMBOL )
                {
                    OutputDevice* pRefDev = pEditEngine->GetRefDevice();
                    vcl::Font aOldFont = pRefDev->GetFont();
                    pRefDev->SetFont( aBulletFont );
                    FontMetric aMetric( pRefDev->GetFontMetric() );
                    // Leading on the first line ...
                    aTopLeft.setY( /* aInfos.nFirstLineOffset + */ aInfos.nFirstLineMaxAscent );
                    aTopLeft.AdjustY( -(aMetric.GetAscent()) );
                    pRefDev->SetFont( aOldFont );
                }
            }
        }

        // Horizontal:
        if( pFmt->GetNumAdjust() == SvxAdjust::Right )
        {
            aTopLeft.AdjustX(nBulletWidth - aBulletSize.Width() );
        }
        else if( pFmt->GetNumAdjust() == SvxAdjust::Center )
        {
            aTopLeft.AdjustX(( nBulletWidth - aBulletSize.Width() ) / 2 );
        }

        if ( aTopLeft.X() < 0 )     // then push
            aTopLeft.setX( 0 );

        aBulletArea = tools::Rectangle( aTopLeft, aBulletSize );
    }
    if ( bReturnPaperPos )
    {
        Size aBulletSize( aBulletArea.GetSize() );
        Point aBulletDocPos( aBulletArea.TopLeft() );
        aBulletDocPos.AdjustY(pEditEngine->GetDocPosTopLeft( nPara ).Y() );
        Point aBulletPos( aBulletDocPos );

        if ( IsVertical() )
        {
            aBulletPos.setY( aBulletDocPos.X() );
            aBulletPos.setX( GetPaperSize().Width() - aBulletDocPos.Y() );
            // Rotate:
            aBulletPos.AdjustX( -(aBulletSize.Height()) );
            Size aSz( aBulletSize );
            aBulletSize.setWidth( aSz.Height() );
            aBulletSize.setHeight( aSz.Width() );
        }
        else if ( pEditEngine->IsRightToLeft( nPara ) )
        {
            aBulletPos.setX( GetPaperSize().Width() - aBulletDocPos.X() - aBulletSize.Width() );
        }

        aBulletArea = tools::Rectangle( aBulletPos, aBulletSize );
    }
    return aBulletArea;
}

EBulletInfo Outliner::GetBulletInfo( sal_Int32 nPara )
{
    EBulletInfo aInfo;

    aInfo.nParagraph = nPara;
    aInfo.bVisible = ImplHasNumberFormat( nPara );

    const SvxNumberFormat* pFmt = GetNumberFormat( nPara );
    aInfo.nType = pFmt ? pFmt->GetNumberingType() : 0;

    if( pFmt )
    {
        if( pFmt->GetNumberingType() != SVX_NUM_BITMAP )
        {
            aInfo.aText = ImplGetBulletText( nPara );

            if( pFmt->GetBulletFont() )
                aInfo.aFont = *pFmt->GetBulletFont();
        }
    }

    if ( aInfo.bVisible )
    {
        aInfo.aBounds = ImpCalcBulletArea( nPara, true, true );
    }

    return aInfo;
}

OUString Outliner::GetText( Paragraph const * pParagraph, sal_Int32 nCount ) const
{

    OUStringBuffer aText(128);
    sal_Int32 nStartPara = pParaList->GetAbsPos( pParagraph );
    for ( sal_Int32 n = 0; n < nCount; n++ )
    {
        aText.append(pEditEngine->GetText( nStartPara + n ));
        if ( (n+1) < nCount )
            aText.append("\n");
    }
    return aText.makeStringAndClear();
}

void Outliner::Remove( Paragraph const * pPara, sal_Int32 nParaCount )
{

    sal_Int32 nPos = pParaList->GetAbsPos( pPara );
    if( !nPos && ( nParaCount >= pParaList->GetParagraphCount() ) )
    {
        Clear();
    }
    else
    {
        for( sal_Int32 n = 0; n < nParaCount; n++ )
            pEditEngine->RemoveParagraph( nPos );
    }
}

void Outliner::StripPortions()
{
    bStrippingPortions = true;
    pEditEngine->StripPortions();
    bStrippingPortions = false;
}

void Outliner::DrawingText( const Point& rStartPos, const OUString& rText, sal_Int32 nTextStart,
                            sal_Int32 nTextLen, const long* pDXArray,const SvxFont& rFont,
                            sal_Int32 nPara, sal_uInt8 nRightToLeft,
                            const EEngineData::WrongSpellVector* pWrongSpellVector,
                            const SvxFieldData* pFieldData,
                            bool bEndOfLine,
                            bool bEndOfParagraph,
                            bool bEndOfBullet,
                            const css::lang::Locale* pLocale,
                            const Color& rOverlineColor,
                            const Color& rTextLineColor)
{
    if(aDrawPortionHdl.IsSet())
    {
        DrawPortionInfo aInfo( rStartPos, rText, nTextStart, nTextLen, rFont, nPara, pDXArray, pWrongSpellVector,
            pFieldData, pLocale, rOverlineColor, rTextLineColor, nRightToLeft, false, 0, bEndOfLine, bEndOfParagraph, bEndOfBullet);

        aDrawPortionHdl.Call( &aInfo );
    }
}

void Outliner::DrawingTab( const Point& rStartPos, long nWidth, const OUString& rChar, const SvxFont& rFont,
    sal_Int32 nPara, sal_uInt8 nRightToLeft, bool bEndOfLine, bool bEndOfParagraph,
    const Color& rOverlineColor, const Color& rTextLineColor)
{
    if(aDrawPortionHdl.IsSet())
    {
        DrawPortionInfo aInfo( rStartPos, rChar, 0, rChar.getLength(), rFont, nPara, nullptr, nullptr,
            nullptr, nullptr, rOverlineColor, rTextLineColor, nRightToLeft, true, nWidth, bEndOfLine, bEndOfParagraph, false);

        aDrawPortionHdl.Call( &aInfo );
    }
}

bool Outliner::RemovingPagesHdl( OutlinerView* pView )
{
    return !aRemovingPagesHdl.IsSet() || aRemovingPagesHdl.Call( pView );
}

bool Outliner::ImpCanDeleteSelectedPages( OutlinerView* pCurView, sal_Int32 _nFirstPage, sal_Int32 nPages )
{

    nDepthChangedHdlPrevDepth = nPages;
    mnFirstSelPage = _nFirstPage;
    return RemovingPagesHdl( pCurView );
}

SfxItemSet const & Outliner::GetParaAttribs( sal_Int32 nPara )
{
    return pEditEngine->GetParaAttribs( nPara );
}

IMPL_LINK( Outliner, ParaVisibleStateChangedHdl, Paragraph&, rPara, void )
{
    sal_Int32 nPara = pParaList->GetAbsPos( &rPara );
    pEditEngine->ShowParagraph( nPara, rPara.IsVisible() );
}

IMPL_LINK_NOARG(Outliner, BeginMovingParagraphsHdl, MoveParagraphsInfo&, void)
{
    if( !IsInUndo() )
        aBeginMovingHdl.Call( this );
}

IMPL_LINK( Outliner, BeginPasteOrDropHdl, PasteOrDropInfos&, rInfos, void )
{
    UndoActionStart( EDITUNDO_DRAGANDDROP );
    maBeginPasteOrDropHdl.Call(&rInfos);
}

IMPL_LINK( Outliner, EndPasteOrDropHdl, PasteOrDropInfos&, rInfos, void )
{
    bPasting = false;
    ImpTextPasted( rInfos.nStartPara, rInfos.nEndPara - rInfos.nStartPara + 1 );
    maEndPasteOrDropHdl.Call( &rInfos );
    UndoActionEnd();
}

IMPL_LINK( Outliner, EndMovingParagraphsHdl, MoveParagraphsInfo&, rInfos, void )
{
    pParaList->MoveParagraphs( rInfos.nStartPara, rInfos.nDestPara, rInfos.nEndPara - rInfos.nStartPara + 1 );
    sal_Int32 nChangesStart = std::min( rInfos.nStartPara, rInfos.nDestPara );
    sal_Int32 nParas = pParaList->GetParagraphCount();
    for ( sal_Int32 n = nChangesStart; n < nParas; n++ )
        ImplCalcBulletText( n, false, false );

    if( !IsInUndo() )
        aEndMovingHdl.Call( this );
}

static bool isSameNumbering( const SvxNumberFormat& rN1, const SvxNumberFormat& rN2 )
{
    if( rN1.GetNumberingType() != rN2.GetNumberingType() )
        return false;

    if( rN1.GetNumStr(1) != rN2.GetNumStr(1) )
        return false;

    if( (rN1.GetPrefix() != rN2.GetPrefix()) || (rN1.GetSuffix() != rN2.GetSuffix()) )
        return false;

    return true;
}

sal_uInt16 Outliner::ImplGetNumbering( sal_Int32 nPara, const SvxNumberFormat* pParaFmt )
{
    sal_uInt16 nNumber = pParaFmt->GetStart() - 1;

    Paragraph* pPara = pParaList->GetParagraph( nPara );
    const sal_Int16 nParaDepth = pPara->GetDepth();

    do
    {
        pPara = pParaList->GetParagraph( nPara );
        const sal_Int16 nDepth = pPara->GetDepth();

        // ignore paragraphs that are below our paragraph or have no numbering
        if( (nDepth > nParaDepth) || (nDepth == -1) )
            continue;

        // stop on paragraphs that are above our paragraph
        if( nDepth < nParaDepth )
            break;

        const SvxNumberFormat* pFmt = GetNumberFormat( nPara );

        if( pFmt == nullptr )
            continue; // ignore paragraphs without bullets

        // check if numbering less than or equal to pParaFmt
        if( !isSameNumbering( *pFmt, *pParaFmt ) || ( pFmt->GetStart() < pParaFmt->GetStart() ) )
            break;

        if (  pFmt->GetStart() > pParaFmt->GetStart() )
        {
           nNumber += pFmt->GetStart() - pParaFmt->GetStart();
           pParaFmt = pFmt;
        }

        const SfxBoolItem& rBulletState = pEditEngine->GetParaAttrib( nPara, EE_PARA_BULLETSTATE );

        if( rBulletState.GetValue() )
            nNumber += 1;

        // same depth, same number format, check for restart
        const sal_Int16 nNumberingStartValue = pPara->GetNumberingStartValue();
        if( (nNumberingStartValue != -1) || pPara->IsParaIsNumberingRestart() )
        {
            if( nNumberingStartValue != -1 )
                nNumber += nNumberingStartValue - 1;
            break;
        }
    }
    while( nPara-- );

    return nNumber;
}

void Outliner::ImplCalcBulletText( sal_Int32 nPara, bool bRecalcLevel, bool bRecalcChildren )
{

    Paragraph* pPara = pParaList->GetParagraph( nPara );

    while ( pPara )
    {
        OUString aBulletText;
        const SvxNumberFormat* pFmt = GetNumberFormat( nPara );
        if( pFmt && ( pFmt->GetNumberingType() != SVX_NUM_BITMAP ) )
        {
            aBulletText += pFmt->GetPrefix();
            if( pFmt->GetNumberingType() == SVX_NUM_CHAR_SPECIAL )
            {
                aBulletText += OUStringChar(pFmt->GetBulletChar());
            }
            else if( pFmt->GetNumberingType() != SVX_NUM_NUMBER_NONE )
            {
                aBulletText += pFmt->GetNumStr( ImplGetNumbering( nPara, pFmt ) );
            }
            aBulletText += pFmt->GetSuffix();
        }

        if (pPara->GetText() != aBulletText)
            pPara->SetText( aBulletText );

        pPara->nFlags &= ~ParaFlag::SETBULLETTEXT;

        if ( bRecalcLevel )
        {
            sal_Int16 nDepth = pPara->GetDepth();
            pPara = pParaList->GetParagraph( ++nPara );
            if ( !bRecalcChildren )
            {
                while ( pPara && ( pPara->GetDepth() > nDepth ) )
                    pPara = pParaList->GetParagraph( ++nPara );
            }

            if ( pPara && ( pPara->GetDepth() < nDepth ) )
                pPara = nullptr;
        }
        else
        {
            pPara = nullptr;
        }
    }
}

void Outliner::Clear()
{

    if( !bFirstParaIsEmpty )
    {
        ImplBlockInsertionCallbacks( true );
        pEditEngine->Clear();
        pParaList->Clear();
        pParaList->Append( std::unique_ptr<Paragraph>(new Paragraph( gnMinDepth )));
        bFirstParaIsEmpty = true;
        ImplBlockInsertionCallbacks( false );
    }
    else
    {
            Paragraph* pPara = pParaList->GetParagraph( 0 );
            if(pPara)
                pPara->SetDepth( gnMinDepth );
    }
}

void Outliner::SetFlatMode( bool bFlat )
{

    if( bFlat != pEditEngine->IsFlatMode() )
    {
        for ( sal_Int32 nPara = pParaList->GetParagraphCount(); nPara; )
            pParaList->GetParagraph( --nPara )->aBulSize.setWidth( -1 );

        pEditEngine->SetFlatMode( bFlat );
    }
}

OUString Outliner::ImplGetBulletText( sal_Int32 nPara )
{
    OUString aRes;
    Paragraph* pPara = pParaList->GetParagraph( nPara );
    if (pPara)
    {
    // Enable optimization again ...
//  if( pPara->nFlags & ParaFlag::SETBULLETTEXT )
        ImplCalcBulletText( nPara, false, false );
        aRes = pPara->GetText();
    }
    return aRes;
}

// this is needed for StarOffice Api
void Outliner::SetLevelDependentStyleSheet( sal_Int32 nPara )
{
    SfxItemSet aOldAttrs( pEditEngine->GetParaAttribs( nPara ) );
    ImplSetLevelDependentStyleSheet( nPara );
    pEditEngine->SetParaAttribs( nPara, aOldAttrs );
}

void Outliner::ImplBlockInsertionCallbacks( bool b )
{
    if ( b )
    {
        nBlockInsCallback++;
    }
    else
    {
        DBG_ASSERT( nBlockInsCallback, "ImplBlockInsertionCallbacks ?!" );
        nBlockInsCallback--;
        if ( !nBlockInsCallback )
        {
            // Call blocked notify events...
            while(!pEditEngine->aNotifyCache.empty())
            {
                EENotify aNotify(pEditEngine->aNotifyCache.front());
                // Remove from list before calling, maybe we enter LeaveBlockNotifications while calling the handler...
                pEditEngine->aNotifyCache.erase(pEditEngine->aNotifyCache.begin());
                pEditEngine->aOutlinerNotifyHdl.Call( aNotify );
            }
        }
    }
}

IMPL_LINK( Outliner, EditEngineNotifyHdl, EENotify&, rNotify, void )
{
    if ( !nBlockInsCallback )
        pEditEngine->aOutlinerNotifyHdl.Call( rNotify );
    else
        pEditEngine->aNotifyCache.push_back(rNotify);
}

/** sets a link that is called at the beginning of a drag operation at an edit view */
void Outliner::SetBeginDropHdl( const Link<EditView*,void>& rLink )
{
    pEditEngine->SetBeginDropHdl( rLink );
}

/** sets a link that is called at the end of a drag operation at an edit view */
void Outliner::SetEndDropHdl( const Link<EditView*,void>& rLink )
{
    pEditEngine->SetEndDropHdl( rLink );
}

/** sets a link that is called before a drop or paste operation. */
void Outliner::SetBeginPasteOrDropHdl( const Link<PasteOrDropInfos*,void>& rLink )
{
    maBeginPasteOrDropHdl = rLink;
}

/** sets a link that is called after a drop or paste operation. */
void Outliner::SetEndPasteOrDropHdl( const Link<PasteOrDropInfos*,void>& rLink )
{
    maEndPasteOrDropHdl = rLink;
}

void Outliner::SetParaFlag( Paragraph* pPara,  ParaFlag nFlag )
{
    if( pPara && !pPara->HasFlag( nFlag ) )
    {
        if( IsUndoEnabled() && !IsInUndo() )
            InsertUndo( std::make_unique<OutlinerUndoChangeParaFlags>( this, GetAbsPos( pPara ), pPara->nFlags, pPara->nFlags|nFlag ) );

        pPara->SetFlag( nFlag );
    }
}

bool Outliner::HasParaFlag( const Paragraph* pPara, ParaFlag nFlag )
{
    return pPara && pPara->HasFlag( nFlag );
}


bool Outliner::IsPageOverflow()
{
    return pEditEngine->IsPageOverflow();
}

std::unique_ptr<NonOverflowingText> Outliner::GetNonOverflowingText() const
{
    /* XXX:
     * nCount should be the number of paragraphs of the non overflowing text
     * nStart should be the starting paragraph of the non overflowing text (XXX: Always 0?)
    */

    if ( GetParagraphCount() < 1 )
        return nullptr;

    // last non-overflowing paragraph is before the first overflowing one
    sal_Int32 nCount = pEditEngine->GetOverflowingParaNum();
    sal_Int32 nOverflowLine = pEditEngine->GetOverflowingLineNum(); // XXX: Unused for now

    // Defensive check: overflowing para index beyond actual # of paragraphs?
    if ( nCount > GetParagraphCount()-1) {
        SAL_INFO("editeng.chaining",
                 "[Overflowing] Ops, trying to retrieve para "
                 << nCount << " when max index is " << GetParagraphCount()-1 );
        return nullptr;
    }

    if (nCount < 0)
    {
        SAL_INFO("editeng.chaining",
                 "[Overflowing] No Overflowing text but GetNonOverflowinText called?!");
        return nullptr;
    }

    // NOTE: We want the selection of the overflowing text from here
    //       At the same time we may want to consider the beginning of such text
    //       in a more fine grained way (i.e. as GetNonOverflowingText did)

/*
    sal_Int32 nHeadPara = pEditEngine->GetOverflowingParaNum();
    sal_uInt32 nParaCount = GetParagraphCount();

    sal_uInt32 nLen = 0;
    for ( sal_Int32 nLine = 0;
          nLine < pEditEngine->GetOverflowingLineNum();
          nLine++) {
        nLen += GetLineLen(nHeadPara, nLine);
    }

    sal_uInt32 nOverflowingPara = pEditEngine->GetOverflowingParaNum();
    ESelection aOverflowingTextSel;
    sal_Int32 nLastPara = nParaCount-1;
    sal_Int32 nLastParaLen = GetText(GetParagraph(nLastPara)).getLength();
    aOverflowingTextSel = ESelection(nOverflowingPara, nLen,
                                     nLastPara, nLastParaLen);
    bool bLastParaInterrupted =
            pEditEngine->GetOverflowingLineNum() > 0;

    return new NonOverflowingText(aOverflowingTextSel, bLastParaInterrupted);
    **/


    // Only overflowing text, i.e. 1st line of 1st paragraph overflowing
    bool bItAllOverflew = nCount == 0 && nOverflowLine == 0;
    if ( bItAllOverflew )
    {
        ESelection aEmptySel(0,0,0,0);
        //EditTextObject *pTObj = pEditEngine->CreateTextObject(aEmptySel);
        bool const bLastParaInterrupted = true; // Last Para was interrupted since everything overflew
        return std::make_unique<NonOverflowingText>(aEmptySel, bLastParaInterrupted);
    } else { // Get the lines that of the overflowing para fit in the box

        sal_Int32 nOverflowingPara = nCount;
        sal_uInt32 nLen = 0;

        for ( sal_Int32 nLine = 0;
              nLine < pEditEngine->GetOverflowingLineNum();
              nLine++)
        {
            nLen += GetLineLen(nOverflowingPara, nLine);
        }

        //sal_Int32 nStartPara = 0;
        //sal_Int32 nStartPos = 0;
        ESelection aOverflowingTextSelection;

        const sal_Int32 nEndPara = GetParagraphCount()-1;
        const sal_Int32 nEndPos = pEditEngine->GetTextLen(nEndPara);

        if (nLen == 0) {
            // XXX: What happens inside this case might be dependent on the joining paragraph or not-thingy
            // Overflowing paragraph is empty or first line overflowing: it's not "Non-Overflowing" text then
            sal_Int32 nParaLen = GetText(GetParagraph(nOverflowingPara-1)).getLength();
            aOverflowingTextSelection =
                ESelection(nOverflowingPara-1, nParaLen, nEndPara, nEndPos);
        } else {
            // We take until we have to from the overflowing paragraph
            aOverflowingTextSelection =
                ESelection(nOverflowingPara, nLen, nEndPara, nEndPos);
        }
        //EditTextObject *pTObj = pEditEngine->CreateTextObject(aNonOverflowingTextSelection);

        //sal_Int32 nLastLine = GetLineCount(nOverflowingPara)-1;
        bool bLastParaInterrupted =
            pEditEngine->GetOverflowingLineNum() > 0;

        return std::make_unique<NonOverflowingText>(aOverflowingTextSelection, bLastParaInterrupted);
    }
}

std::unique_ptr<OutlinerParaObject> Outliner::GetEmptyParaObject() const
{
    std::unique_ptr<EditTextObject> pEmptyText = pEditEngine->GetEmptyTextObject();
    std::unique_ptr<OutlinerParaObject> pPObj( new OutlinerParaObject( std::move(pEmptyText) ));
    pPObj->SetOutlinerMode(GetMode());
    return pPObj;
}

std::unique_ptr<OverflowingText> Outliner::GetOverflowingText() const
{
    if ( pEditEngine->GetOverflowingParaNum() < 0)
        return nullptr;


    // Defensive check: overflowing para index beyond actual # of paragraphs?
    if ( pEditEngine->GetOverflowingParaNum() > GetParagraphCount()-1) {
        SAL_INFO("editeng.chaining",
                 "[Overflowing] Ops, trying to retrieve para "
                 << pEditEngine->GetOverflowingParaNum() << " when max index is "
                 << GetParagraphCount()-1 );
        return nullptr;
    }

    sal_Int32 nHeadPara = pEditEngine->GetOverflowingParaNum();
    sal_uInt32 nParaCount = GetParagraphCount();

    sal_uInt32 nLen = 0;
    for ( sal_Int32 nLine = 0;
          nLine < pEditEngine->GetOverflowingLineNum();
          nLine++) {
        nLen += GetLineLen(nHeadPara, nLine);
    }

    sal_uInt32 nOverflowingPara = pEditEngine->GetOverflowingParaNum();
    ESelection aOverflowingTextSel;
    sal_Int32 nLastPara = nParaCount-1;
    sal_Int32 nLastParaLen = GetText(GetParagraph(nLastPara)).getLength();
    aOverflowingTextSel = ESelection(nOverflowingPara, nLen,
                                     nLastPara, nLastParaLen);
    return std::make_unique<OverflowingText>(pEditEngine->CreateTransferable(aOverflowingTextSel));

}

void Outliner::ClearOverflowingParaNum()
{
    pEditEngine->ClearOverflowingParaNum();
}

void Outliner::dumpAsXml(xmlTextWriterPtr pWriter) const
{
    bool bOwns = false;
    if (!pWriter)
    {
        pWriter = xmlNewTextWriterFilename("outliner.xml", 0);
        xmlTextWriterSetIndent(pWriter,1);
        xmlTextWriterSetIndentString(pWriter, BAD_CAST("  "));
        xmlTextWriterStartDocument(pWriter, nullptr, nullptr, nullptr);
        bOwns = true;
    }

    xmlTextWriterStartElement(pWriter, BAD_CAST("Outliner"));
    pParaList->dumpAsXml(pWriter);
    xmlTextWriterEndElement(pWriter);

    if (bOwns)
    {
       xmlTextWriterEndDocument(pWriter);
       xmlFreeTextWriter(pWriter);
    }
}

/* vim:set shiftwidth=4 softtabstop=4 expandtab: */