/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the LibreOffice project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. * * This file incorporates work covered by the following license notice: * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed * with this work for additional information regarding copyright * ownership. The ASF licenses this file to you under the Apache * License, Version 2.0 (the "License"); you may not use this file * except in compliance with the License. You may obtain a copy of * the License at http://www.apache.org/licenses/LICENSE-2.0 . */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "itrtxt.hxx" #include #include #include "porfld.hxx" #include "porfly.hxx" #include "pordrop.hxx" #include #include "pormulti.hxx" #include #include // Not reentrant !!! // is set in GetCharRect and is interpreted in UnitUp/Down. bool SwTextCursor::bRightMargin = false; // After calculating the position of a character during GetCharRect // this function allows to find the coordinates of a position (defined // in pCMS->pSpecialPos) inside a special portion (e.g., a field) static void lcl_GetCharRectInsideField( SwTextSizeInfo& rInf, SwRect& rOrig, const SwCursorMoveState& rCMS, const SwLinePortion& rPor ) { OSL_ENSURE( rCMS.m_pSpecialPos, "Information about special pos missing" ); if ( rPor.InFieldGrp() && !static_cast(rPor).GetExp().isEmpty() ) { const sal_Int32 nCharOfst = rCMS.m_pSpecialPos->nCharOfst; sal_Int32 nFieldIdx = 0; sal_Int32 nFieldLen = 0; OUString sString; const OUString* pString = nullptr; const SwLinePortion* pPor = &rPor; do { if ( pPor->InFieldGrp() ) { sString = static_cast(pPor)->GetExp(); pString = &sString; nFieldLen = pString->getLength(); } else { pString = nullptr; nFieldLen = 0; } if ( ! pPor->GetNextPortion() || nFieldIdx + nFieldLen > nCharOfst ) break; nFieldIdx = nFieldIdx + nFieldLen; rOrig.Pos().AdjustX(pPor->Width() ); pPor = pPor->GetNextPortion(); } while ( true ); OSL_ENSURE( nCharOfst >= nFieldIdx, "Request of position inside field failed" ); sal_Int32 nLen = nCharOfst - nFieldIdx + 1; if ( pString ) { // get script for field portion rInf.GetFont()->SetActual( SwScriptInfo::WhichFont(0, *pString) ); TextFrameIndex const nOldLen = pPor->GetLen(); const_cast(pPor)->SetLen(TextFrameIndex(nLen - 1)); const SwTwips nX1 = pPor->GetLen() ? pPor->GetTextSize( rInf ).Width() : 0; SwTwips nX2 = 0; if ( rCMS.m_bRealWidth ) { const_cast(pPor)->SetLen(TextFrameIndex(nLen)); nX2 = pPor->GetTextSize( rInf ).Width(); } const_cast(pPor)->SetLen( nOldLen ); rOrig.Pos().AdjustX(nX1 ); rOrig.Width( ( nX2 > nX1 ) ? ( nX2 - nX1 ) : 1 ); } } else { // special cases: no common fields, e.g., graphic number portion, // FlyInCntPortions, Notes rOrig.Width( rCMS.m_bRealWidth && rPor.Width() ? rPor.Width() : 1 ); } } // #i111284# namespace { bool IsLabelAlignmentActive( const SwTextNode& rTextNode ) { bool bRet( false ); if ( rTextNode.GetNumRule() ) { int nListLevel = rTextNode.GetActualListLevel(); if (nListLevel < 0) nListLevel = 0; if (nListLevel >= MAXLEVEL) nListLevel = MAXLEVEL - 1; const SwNumFormat& rNumFormat = rTextNode.GetNumRule()->Get( static_cast(nListLevel) ); if ( rNumFormat.GetPositionAndSpaceMode() == SvxNumberFormat::LABEL_ALIGNMENT ) { bRet = true; } } return bRet; } } // end of anonymous namespace void SwTextMargin::CtorInitTextMargin( SwTextFrame *pNewFrame, SwTextSizeInfo *pNewInf ) { CtorInitTextIter( pNewFrame, pNewInf ); m_pInf = pNewInf; GetInfo().SetFont( GetFnt() ); const SwTextNode *const pNode = m_pFrame->GetTextNodeForParaProps(); const SvxLRSpaceItem &rSpace = pNode->GetSwAttrSet().GetLRSpace(); // #i95907# // #i111284# const SwTextNode *pTextNode = m_pFrame->GetTextNodeForParaProps(); const bool bLabelAlignmentActive = IsLabelAlignmentActive( *pTextNode ); const bool bListLevelIndentsApplicable = pTextNode->AreListLevelIndentsApplicable(); const bool bListLevelIndentsApplicableAndLabelAlignmentActive = bListLevelIndentsApplicable && bLabelAlignmentActive; // Carefully adjust the text formatting ranges. // This whole area desperately needs some rework. There are // quite a couple of values that need to be considered: // 1. paragraph indent // 2. paragraph first line indent // 3. numbering indent // 4. numbering spacing to text // 5. paragraph border // Note: These values have already been used during calculation // of the printing area of the paragraph. const int nLMWithNum = pNode->GetLeftMarginWithNum( true ); if ( m_pFrame->IsRightToLeft() ) { // this calculation is identical this the calculation for L2R layout - see below nLeft = m_pFrame->getFrameArea().Left() + m_pFrame->getFramePrintArea().Left() + nLMWithNum - pNode->GetLeftMarginWithNum() - // #i95907# // #i111284# // rSpace.GetLeft() + rSpace.GetTextLeft(); ( bListLevelIndentsApplicableAndLabelAlignmentActive ? 0 : ( rSpace.GetLeft() - rSpace.GetTextLeft() ) ); } else { // #i95907# // #i111284# if ( bListLevelIndentsApplicableAndLabelAlignmentActive || !pNode->getIDocumentSettingAccess()->get(DocumentSettingId::IGNORE_FIRST_LINE_INDENT_IN_NUMBERING) ) { // this calculation is identical this the calculation for R2L layout - see above nLeft = m_pFrame->getFrameArea().Left() + m_pFrame->getFramePrintArea().Left() + nLMWithNum - pNode->GetLeftMarginWithNum() - // #i95907# // #i111284# ( bListLevelIndentsApplicableAndLabelAlignmentActive ? 0 : ( rSpace.GetLeft() - rSpace.GetTextLeft() ) ); } else { nLeft = m_pFrame->getFrameArea().Left() + std::max( long( rSpace.GetTextLeft() + nLMWithNum ), m_pFrame->getFramePrintArea().Left() ); } } nRight = m_pFrame->getFrameArea().Left() + m_pFrame->getFramePrintArea().Left() + m_pFrame->getFramePrintArea().Width(); if( nLeft >= nRight && // #i53066# Omit adjustment of nLeft for numbered // paras inside cells inside new documents: ( pNode->getIDocumentSettingAccess()->get(DocumentSettingId::IGNORE_FIRST_LINE_INDENT_IN_NUMBERING) || !m_pFrame->IsInTab() || ( !nLMWithNum && !(bLabelAlignmentActive && !bListLevelIndentsApplicable) ) ) ) { nLeft = m_pFrame->getFramePrintArea().Left() + m_pFrame->getFrameArea().Left(); if( nLeft >= nRight ) // e.g. with large paragraph indentations in slim table columns nRight = nLeft + 1; // einen goennen wir uns immer } if( m_pFrame->IsFollow() && m_pFrame->GetOffset() ) nFirst = nLeft; else { short nFLOfst = 0; long nFirstLineOfs = 0; if( !pNode->GetFirstLineOfsWithNum( nFLOfst ) && rSpace.IsAutoFirst() ) { nFirstLineOfs = GetFnt()->GetSize( GetFnt()->GetActual() ).Height(); LanguageType const aLang = m_pFrame->GetLangOfChar( TextFrameIndex(0), css::i18n::ScriptType::ASIAN); if (aLang != LANGUAGE_KOREAN && aLang != LANGUAGE_JAPANESE) nFirstLineOfs<<=1; const SvxLineSpacingItem *pSpace = m_aLineInf.GetLineSpacing(); if( pSpace ) { switch( pSpace->GetLineSpaceRule() ) { case SvxLineSpaceRule::Auto: break; case SvxLineSpaceRule::Min: { if( nFirstLineOfs < pSpace->GetLineHeight() ) nFirstLineOfs = pSpace->GetLineHeight(); break; } case SvxLineSpaceRule::Fix: nFirstLineOfs = pSpace->GetLineHeight(); break; default: OSL_FAIL( ": unknown LineSpaceRule" ); } switch( pSpace->GetInterLineSpaceRule() ) { case SvxInterLineSpaceRule::Off: break; case SvxInterLineSpaceRule::Prop: { long nTmp = pSpace->GetPropLineSpace(); // 50% is the minimum, at 0% we switch to // the default value 100%... if( nTmp < 50 ) nTmp = nTmp ? 50 : 100; nTmp *= nFirstLineOfs; nTmp /= 100; if( !nTmp ) ++nTmp; nFirstLineOfs = nTmp; break; } case SvxInterLineSpaceRule::Fix: { nFirstLineOfs += pSpace->GetInterLineSpace(); break; } default: OSL_FAIL( ": unknown InterLineSpaceRule" ); } } } else nFirstLineOfs = nFLOfst; // #i95907# // #i111284# if ( m_pFrame->IsRightToLeft() || bListLevelIndentsApplicableAndLabelAlignmentActive || !pNode->getIDocumentSettingAccess()->get(DocumentSettingId::IGNORE_FIRST_LINE_INDENT_IN_NUMBERING) ) { if ( nFirstLineOfs < 0 && m_pFrame->IsInTab() && nLeft == m_pFrame->getFramePrintArea().Left() + m_pFrame->getFrameArea().Left() && !m_pFrame->IsRightToLeft() && !bListLevelIndentsApplicableAndLabelAlignmentActive ) { // tdf#130218 always show hanging indent in narrow table cells // to avoid hiding the text content of the first line nLeft -= nFirstLineOfs; } nFirst = nLeft + nFirstLineOfs; } else { nFirst = m_pFrame->getFrameArea().Left() + std::max( rSpace.GetTextLeft() + nLMWithNum+ nFirstLineOfs, m_pFrame->getFramePrintArea().Left() ); } // Note: returns a negative // value for the new list label position and space mode LABEL_ALIGNMENT // and label alignment CENTER and RIGHT in L2R layout respectively // label alignment LEFT and CENTER in R2L layout nFirst += m_pFrame->GetAdditionalFirstLineOffset(); if( nFirst >= nRight ) nFirst = nRight - 1; } const SvxAdjustItem& rAdjust = m_pFrame->GetTextNodeForParaProps()->GetSwAttrSet().GetAdjust(); nAdjust = rAdjust.GetAdjust(); // left is left and right is right if ( m_pFrame->IsRightToLeft() ) { if ( SvxAdjust::Left == nAdjust ) nAdjust = SvxAdjust::Right; else if ( SvxAdjust::Right == nAdjust ) nAdjust = SvxAdjust::Left; } m_bOneBlock = rAdjust.GetOneWord() == SvxAdjust::Block; m_bLastBlock = rAdjust.GetLastBlock() == SvxAdjust::Block; m_bLastCenter = rAdjust.GetLastBlock() == SvxAdjust::Center; // #i91133# mnTabLeft = pNode->GetLeftMarginForTabCalculation(); DropInit(); } void SwTextMargin::DropInit() { nDropLeft = nDropLines = nDropHeight = nDropDescent = 0; const SwParaPortion *pPara = GetInfo().GetParaPortion(); if( pPara ) { const SwDropPortion *pPorDrop = pPara->FindDropPortion(); if ( pPorDrop ) { nDropLeft = pPorDrop->GetDropLeft(); nDropLines = pPorDrop->GetLines(); nDropHeight = pPorDrop->GetDropHeight(); nDropDescent = pPorDrop->GetDropDescent(); } } } // The function is interpreting / observing / evaluating / keeping / respecting the first line indention and the specified width. SwTwips SwTextMargin::GetLineStart() const { SwTwips nRet = GetLeftMargin(); if( GetAdjust() != SvxAdjust::Left && !m_pCurr->GetFirstPortion()->IsMarginPortion() ) { // If the first portion is a Margin, then the // adjustment is expressed by the portions. if( GetAdjust() == SvxAdjust::Right ) nRet = Right() - CurrWidth(); else if( GetAdjust() == SvxAdjust::Center ) nRet += (GetLineWidth() - CurrWidth()) / 2; } return nRet; } void SwTextCursor::CtorInitTextCursor( SwTextFrame *pNewFrame, SwTextSizeInfo *pNewInf ) { CtorInitTextMargin( pNewFrame, pNewInf ); // 6096: Attention, the iterators are derived! // GetInfo().SetOut( GetInfo().GetWin() ); } // 1170: Ancient bug: Shift-End forgets the last character ... void SwTextCursor::GetEndCharRect(SwRect* pOrig, const TextFrameIndex nOfst, SwCursorMoveState* pCMS, const long nMax ) { // 1170: Ambiguity of document positions bRightMargin = true; CharCursorToLine(nOfst); // Somehow twisted: nOfst names the position behind the last // character of the last line == This is the position in front of the first character // of the line, in which we are situated: if( nOfst != GetStart() || !m_pCurr->GetLen() ) { // 8810: Master line RightMargin, after that LeftMargin GetCharRect( pOrig, nOfst, pCMS, nMax ); bRightMargin = nOfst >= GetEnd() && nOfst < TextFrameIndex(GetInfo().GetText().getLength()); return; } if( !GetPrev() || !GetPrev()->GetLen() || !PrevLine() ) { GetCharRect( pOrig, nOfst, pCMS, nMax ); return; } // If necessary, as catch up, do the adjustment GetAdjusted(); long nX = 0; long nLast = 0; SwLinePortion *pPor = m_pCurr->GetFirstPortion(); sal_uInt16 nTmpHeight, nTmpAscent; CalcAscentAndHeight( nTmpAscent, nTmpHeight ); sal_uInt16 nPorHeight = nTmpHeight; sal_uInt16 nPorAscent = nTmpAscent; // Search for the last Text/EndPortion of the line while( pPor ) { nX = nX + pPor->Width(); if( pPor->InTextGrp() || ( pPor->GetLen() && !pPor->IsFlyPortion() && !pPor->IsHolePortion() ) || pPor->IsBreakPortion() ) { nLast = nX; nPorHeight = pPor->Height(); nPorAscent = pPor->GetAscent(); } pPor = pPor->GetNextPortion(); } const Size aCharSize( 1, nTmpHeight ); pOrig->Pos( GetTopLeft() ); pOrig->SSize( aCharSize ); pOrig->Pos().AdjustX(nLast ); const SwTwips nTmpRight = Right() - 1; if( pOrig->Left() > nTmpRight ) pOrig->Pos().setX( nTmpRight ); if ( pCMS && pCMS->m_bRealHeight ) { if ( nTmpAscent > nPorAscent ) pCMS->m_aRealHeight.setX( nTmpAscent - nPorAscent ); else pCMS->m_aRealHeight.setX( 0 ); OSL_ENSURE( nPorHeight, "GetCharRect: Missing Portion-Height" ); pCMS->m_aRealHeight.setY( nPorHeight ); } } // internal function, called by SwTextCursor::GetCharRect() to calculate // the relative character position in the current line. // pOrig refers to x and y coordinates, width and height of the cursor // pCMS is used for restricting the cursor, if there are different font // heights in one line ( first value = offset to y of pOrig, second // value = real height of (shortened) cursor void SwTextCursor::GetCharRect_( SwRect* pOrig, TextFrameIndex const nOfst, SwCursorMoveState* pCMS ) { const OUString aText = GetInfo().GetText(); SwTextSizeInfo aInf( GetInfo(), &aText, m_nStart ); if( GetPropFont() ) aInf.GetFont()->SetProportion( GetPropFont() ); sal_uInt16 nTmpAscent, nTmpHeight; // Line height CalcAscentAndHeight( nTmpAscent, nTmpHeight ); const Size aCharSize( 1, nTmpHeight ); const Point aCharPos; pOrig->Pos( aCharPos ); pOrig->SSize( aCharSize ); // If we are looking for a position inside a field which covers // more than one line we may not skip any "empty portions" at the // beginning of a line const bool bInsideFirstField = pCMS && pCMS->m_pSpecialPos && ( pCMS->m_pSpecialPos->nLineOfst || SwSPExtendRange::BEFORE == pCMS->m_pSpecialPos->nExtendRange ); bool bWidth = pCMS && pCMS->m_bRealWidth; if( !m_pCurr->GetLen() && !m_pCurr->Width() ) { if ( pCMS && pCMS->m_bRealHeight ) { pCMS->m_aRealHeight.setX( 0 ); pCMS->m_aRealHeight.setY( nTmpHeight ); } } else { sal_uInt16 nPorHeight = nTmpHeight; sal_uInt16 nPorAscent = nTmpAscent; SwTwips nX = 0; SwTwips nTmpFirst = 0; SwLinePortion *pPor = m_pCurr->GetFirstPortion(); SwBidiPortion* pLastBidiPor = nullptr; TextFrameIndex nLastBidiIdx(-1); SwTwips nLastBidiPorWidth = 0; std::deque* pKanaComp = m_pCurr->GetpKanaComp(); sal_uInt16 nSpaceIdx = 0; size_t nKanaIdx = 0; long nSpaceAdd = m_pCurr->IsSpaceAdd() ? m_pCurr->GetLLSpaceAdd( 0 ) : 0; bool bNoText = true; // First all portions without Len at beginning of line are skipped. // Exceptions are the mean special portions from WhichFirstPortion: // Num, ErgoSum, FootnoteNum, FieldRests // 8477: but also the only Textportion of an empty line with // Right/Center-Adjustment! So not just pPor->GetExpandPortion() ... while( pPor && !pPor->GetLen() && ! bInsideFirstField ) { nX += pPor->Width(); if ( pPor->InSpaceGrp() && nSpaceAdd ) nX += pPor->CalcSpacing( nSpaceAdd, aInf ); if( bNoText ) nTmpFirst = nX; // 8670: EndPortions count once as TextPortions. // if( pPor->InTextGrp() || pPor->IsBreakPortion() ) if( pPor->InTextGrp() || pPor->IsBreakPortion() || pPor->InTabGrp() ) { bNoText = false; nTmpFirst = nX; } if( pPor->IsMultiPortion() && static_cast(pPor)->HasTabulator() ) { if ( m_pCurr->IsSpaceAdd() ) { if ( ++nSpaceIdx < m_pCurr->GetLLSpaceAddCount() ) nSpaceAdd = m_pCurr->GetLLSpaceAdd( nSpaceIdx ); else nSpaceAdd = 0; } if( pKanaComp && ( nKanaIdx + 1 ) < pKanaComp->size() ) ++nKanaIdx; } if( pPor->InFixMargGrp() ) { if( pPor->IsMarginPortion() ) bNoText = false; else { // fix margin portion => next SpaceAdd, KanaComp value if ( m_pCurr->IsSpaceAdd() ) { if ( ++nSpaceIdx < m_pCurr->GetLLSpaceAddCount() ) nSpaceAdd = m_pCurr->GetLLSpaceAdd( nSpaceIdx ); else nSpaceAdd = 0; } if( pKanaComp && ( nKanaIdx + 1 ) < pKanaComp->size() ) ++nKanaIdx; } } pPor = pPor->GetNextPortion(); } if( !pPor ) { // There's just Spezialportions. nX = nTmpFirst; } else { if( !pPor->IsMarginPortion() && !pPor->IsPostItsPortion() && (!pPor->InFieldGrp() || pPor->GetAscent() ) ) { nPorHeight = pPor->Height(); nPorAscent = pPor->GetAscent(); } while( pPor && !pPor->IsBreakPortion() && ( aInf.GetIdx() < nOfst || ( bWidth && ( pPor->IsKernPortion() || pPor->IsMultiPortion() ) ) ) ) { if( !pPor->IsMarginPortion() && !pPor->IsPostItsPortion() && (!pPor->InFieldGrp() || pPor->GetAscent() ) ) { nPorHeight = pPor->Height(); nPorAscent = pPor->GetAscent(); } // If we are behind the portion, we add the portion width to // nX. Special case: nOfst = aInf.GetIdx() + pPor->GetLen(). // For common portions (including BidiPortions) we want to add // the portion width to nX. For MultiPortions, nExtra = 0, // therefore we go to the 'else' branch and start a recursion. const TextFrameIndex nExtra( (pPor->IsMultiPortion() && !static_cast(pPor)->IsBidi() && !bWidth) ? 0 : 1 ); if ( aInf.GetIdx() + pPor->GetLen() < nOfst + nExtra ) { if ( pPor->InSpaceGrp() && nSpaceAdd ) nX += pPor->PrtWidth() + pPor->CalcSpacing( nSpaceAdd, aInf ); else { if( pPor->InFixMargGrp() && ! pPor->IsMarginPortion() ) { // update to current SpaceAdd, KanaComp values if ( m_pCurr->IsSpaceAdd() ) { if ( ++nSpaceIdx < m_pCurr->GetLLSpaceAddCount() ) nSpaceAdd = m_pCurr->GetLLSpaceAdd( nSpaceIdx ); else nSpaceAdd = 0; } if ( pKanaComp && ( nKanaIdx + 1 ) < pKanaComp->size() ) ++nKanaIdx; } if ( !pPor->IsFlyPortion() || ( pPor->GetNextPortion() && !pPor->GetNextPortion()->IsMarginPortion() ) ) nX += pPor->PrtWidth(); } if( pPor->IsMultiPortion() ) { if ( static_cast(pPor)->HasTabulator() ) { if ( m_pCurr->IsSpaceAdd() ) { if ( ++nSpaceIdx < m_pCurr->GetLLSpaceAddCount() ) nSpaceAdd = m_pCurr->GetLLSpaceAdd( nSpaceIdx ); else nSpaceAdd = 0; } if( pKanaComp && ( nKanaIdx + 1 ) < pKanaComp->size() ) ++nKanaIdx; } // if we are right behind a BidiPortion, we have to // hold a pointer to the BidiPortion in order to // find the correct cursor position, depending on the // cursor level if ( static_cast(pPor)->IsBidi() && aInf.GetIdx() + pPor->GetLen() == nOfst ) { pLastBidiPor = static_cast(pPor); nLastBidiIdx = aInf.GetIdx(); nLastBidiPorWidth = pLastBidiPor->Width() + pLastBidiPor->CalcSpacing( nSpaceAdd, aInf ); } } aInf.SetIdx( aInf.GetIdx() + pPor->GetLen() ); pPor = pPor->GetNextPortion(); } else { if( pPor->IsMultiPortion() ) { nTmpAscent = AdjustBaseLine( *m_pCurr, pPor ); GetInfo().SetMulti( true ); pOrig->Pos().AdjustY(nTmpAscent - nPorAscent ); if( pCMS && pCMS->m_b2Lines ) { const bool bRecursion (pCMS->m_p2Lines); if ( !bRecursion ) { pCMS->m_p2Lines.reset(new Sw2LinesPos); pCMS->m_p2Lines->aLine = SwRect(aCharPos, aCharSize); } if( static_cast(pPor)->HasRotation() ) { if( static_cast(pPor)->IsRevers() ) pCMS->m_p2Lines->nMultiType = MultiPortionType::ROT_270; else pCMS->m_p2Lines->nMultiType = MultiPortionType::ROT_90; } else if( static_cast(pPor)->IsDouble() ) pCMS->m_p2Lines->nMultiType = MultiPortionType::TWOLINE; else if( static_cast(pPor)->IsBidi() ) pCMS->m_p2Lines->nMultiType = MultiPortionType::BIDI; else pCMS->m_p2Lines->nMultiType = MultiPortionType::RUBY; SwTwips nTmpWidth = pPor->Width(); if( nSpaceAdd ) nTmpWidth += pPor->CalcSpacing(nSpaceAdd, aInf); SwRect aRect( Point(aCharPos.X() + nX, pOrig->Top() ), Size( nTmpWidth, pPor->Height() ) ); if ( ! bRecursion ) pCMS->m_p2Lines->aPortion = aRect; else pCMS->m_p2Lines->aPortion2 = aRect; } // In a multi-portion we use GetCharRect()-function // recursively and must add the x-position // of the multi-portion. TextFrameIndex const nOldStart = m_nStart; SwTwips nOldY = m_nY; sal_uInt8 nOldProp = GetPropFont(); m_nStart = aInf.GetIdx(); SwLineLayout* pOldCurr = m_pCurr; m_pCurr = &static_cast(pPor)->GetRoot(); if( static_cast(pPor)->IsDouble() ) SetPropFont( 50 ); SwTextGridItem const*const pGrid( GetGridItem(GetTextFrame()->FindPageFrame())); const bool bHasGrid = pGrid && GetInfo().SnapToGrid(); const sal_uInt16 nRubyHeight = bHasGrid ? pGrid->GetRubyHeight() : 0; if( m_nStart + m_pCurr->GetLen() <= nOfst && GetNext() && ( ! static_cast(pPor)->IsRuby() || static_cast(pPor)->OnTop() ) ) { sal_uInt16 nOffset; // in grid mode we may only add the height of the // ruby line if ruby line is on top if ( bHasGrid && static_cast(pPor)->IsRuby() && static_cast(pPor)->OnTop() ) nOffset = nRubyHeight; else nOffset = GetLineHeight(); pOrig->Pos().AdjustY(nOffset ); Next(); } const bool bSpaceChg = static_cast(pPor)-> ChgSpaceAdd( m_pCurr, nSpaceAdd ); Point aOldPos = pOrig->Pos(); // Ok, for ruby portions in grid mode we have to // temporarily set the inner line height to the // outer line height because that value is needed // for the adjustment inside the recursion const sal_uInt16 nOldRubyHeight = m_pCurr->Height(); const sal_uInt16 nOldRubyRealHeight = m_pCurr->GetRealHeight(); const bool bChgHeight = static_cast(pPor)->IsRuby() && bHasGrid; if ( bChgHeight ) { m_pCurr->Height( pOldCurr->Height() - nRubyHeight ); m_pCurr->SetRealHeight( pOldCurr->GetRealHeight() - nRubyHeight ); } SwLayoutModeModifier aLayoutModeModifier( *GetInfo().GetOut() ); if ( static_cast(pPor)->IsBidi() ) { aLayoutModeModifier.Modify( static_cast(pPor)->GetLevel() % 2 ); } GetCharRect_( pOrig, nOfst, pCMS ); if ( bChgHeight ) { m_pCurr->Height( nOldRubyHeight ); m_pCurr->SetRealHeight( nOldRubyRealHeight ); } // if we are still in the first row of // our 2 line multiportion, we use the FirstMulti flag // to indicate this if ( static_cast(pPor)->IsDouble() ) { // the recursion may have damaged our font size SetPropFont( nOldProp ); GetInfo().GetFont()->SetProportion( 100 ); if ( m_pCurr == &static_cast(pPor)->GetRoot() ) { GetInfo().SetFirstMulti( true ); // we want to treat a double line portion like a // single line portion, if there is no text in // the second line if ( !m_pCurr->GetNext() || !m_pCurr->GetNext()->GetLen() ) GetInfo().SetMulti( false ); } } // ruby portions are treated like single line portions else if( static_cast(pPor)->IsRuby() || static_cast(pPor)->IsBidi() ) GetInfo().SetMulti( false ); // calculate cursor values if( static_cast(pPor)->HasRotation() ) { GetInfo().SetMulti( false ); long nTmp = pOrig->Width(); pOrig->Width( pOrig->Height() ); pOrig->Height( nTmp ); nTmp = pOrig->Left() - aOldPos.X(); // if we travel into our rotated portion from // a line below, we have to take care, that the // y coord in pOrig is less than line height: if ( nTmp ) nTmp--; pOrig->Pos().setX( nX + aOldPos.X() ); if( static_cast(pPor)->IsRevers() ) pOrig->Pos().setY( aOldPos.Y() + nTmp ); else pOrig->Pos().setY( aOldPos.Y() + pPor->Height() - nTmp - pOrig->Height() ); if ( pCMS && pCMS->m_bRealHeight ) { pCMS->m_aRealHeight.setY( -pCMS->m_aRealHeight.Y() ); // result for rotated multi portion is not // correct for reverse (270 degree) portions if( static_cast(pPor)->IsRevers() ) { if ( SvxParaVertAlignItem::Align::Automatic == GetLineInfo().GetVertAlign() ) // if vertical alignment is set to auto, // we switch from base line alignment // to centered alignment pCMS->m_aRealHeight.setX( ( pOrig->Width() + pCMS->m_aRealHeight.Y() ) / 2 ); else pCMS->m_aRealHeight.setX( pOrig->Width() - pCMS->m_aRealHeight.X() + pCMS->m_aRealHeight.Y() ); } } } else { pOrig->Pos().AdjustY(aOldPos.Y() ); if ( static_cast(pPor)->IsBidi() ) { const SwTwips nPorWidth = pPor->Width() + pPor->CalcSpacing( nSpaceAdd, aInf ); const SwTwips nInsideOfst = pOrig->Pos().X(); pOrig->Pos().setX( nX + nPorWidth - nInsideOfst - pOrig->Width() ); } else pOrig->Pos().AdjustX(nX ); if( static_cast(pPor)->HasBrackets() ) pOrig->Pos().AdjustX( static_cast(pPor)->PreWidth() ); } if( bSpaceChg ) SwDoubleLinePortion::ResetSpaceAdd( m_pCurr ); m_pCurr = pOldCurr; m_nStart = nOldStart; m_nY = nOldY; m_bPrev = false; return; } if ( pPor->PrtWidth() ) { TextFrameIndex const nOldLen = pPor->GetLen(); pPor->SetLen( nOfst - aInf.GetIdx() ); aInf.SetLen( pPor->GetLen() ); if( nX || !pPor->InNumberGrp() ) { SeekAndChg( aInf ); const bool bOldOnWin = aInf.OnWin(); aInf.SetOnWin( false ); // no BULLETs! SwTwips nTmp = nX; aInf.SetKanaComp( pKanaComp ); aInf.SetKanaIdx( nKanaIdx ); nX += pPor->GetTextSize( aInf ).Width(); aInf.SetOnWin( bOldOnWin ); if ( pPor->InSpaceGrp() && nSpaceAdd ) nX += pPor->CalcSpacing( nSpaceAdd, aInf ); if( bWidth ) { pPor->SetLen(pPor->GetLen() + TextFrameIndex(1)); aInf.SetLen( pPor->GetLen() ); aInf.SetOnWin( false ); // no BULLETs! nTmp += pPor->GetTextSize( aInf ).Width(); aInf.SetOnWin( bOldOnWin ); if ( pPor->InSpaceGrp() && nSpaceAdd ) nTmp += pPor->CalcSpacing(nSpaceAdd, aInf); pOrig->Width( nTmp - nX ); } } pPor->SetLen( nOldLen ); // Shift the cursor with the right border width // Note: nX remains positive because GetTextSize() also include the width of the right border if( aInf.GetIdx() < nOfst && nOfst < aInf.GetIdx() + pPor->GetLen() ) { // Find the current drop portion part and use its right border if( pPor->IsDropPortion() && static_cast(pPor)->GetLines() > 1 ) { SwDropPortion* pDrop = static_cast(pPor); const SwDropPortionPart* pCurrPart = pDrop->GetPart(); TextFrameIndex nSumLength(0); while( pCurrPart && (nSumLength += pCurrPart->GetLen()) < nOfst - aInf.GetIdx() ) { pCurrPart = pCurrPart->GetFollow(); } if( pCurrPart && nSumLength != nOfst - aInf.GetIdx() && pCurrPart->GetFont().GetRightBorder() && !pCurrPart->GetJoinBorderWithNext() ) { nX -= pCurrPart->GetFont().GetRightBorderSpace(); } } else if( GetInfo().GetFont()->GetRightBorder() && !pPor->GetJoinBorderWithNext()) { nX -= GetInfo().GetFont()->GetRightBorderSpace(); } } } bWidth = false; break; } } } if( pPor ) { OSL_ENSURE( !pPor->InNumberGrp() || bInsideFirstField, "Number surprise" ); bool bEmptyField = false; if( pPor->InFieldGrp() && pPor->GetLen() ) { SwFieldPortion *pTmp = static_cast(pPor); while( pTmp->HasFollow() && pTmp->GetExp().isEmpty() ) { sal_uInt16 nAddX = pTmp->Width(); SwLinePortion *pNext = pTmp->GetNextPortion(); while( pNext && !pNext->InFieldGrp() ) { OSL_ENSURE( !pNext->GetLen(), "Where's my field follow?" ); nAddX = nAddX + pNext->Width(); pNext = pNext->GetNextPortion(); } if( !pNext ) break; pTmp = static_cast(pNext); nPorHeight = pTmp->Height(); nPorAscent = pTmp->GetAscent(); nX += nAddX; bEmptyField = true; } } // 8513: Fields in justified text, skipped while( pPor && !pPor->GetLen() && ! bInsideFirstField && ( pPor->IsFlyPortion() || pPor->IsKernPortion() || pPor->IsBlankPortion() || pPor->InTabGrp() || ( !bEmptyField && pPor->InFieldGrp() ) ) ) { if ( pPor->InSpaceGrp() && nSpaceAdd ) nX += pPor->PrtWidth() + pPor->CalcSpacing( nSpaceAdd, aInf ); else { if( pPor->InFixMargGrp() && ! pPor->IsMarginPortion() ) { if ( m_pCurr->IsSpaceAdd() ) { if ( ++nSpaceIdx < m_pCurr->GetLLSpaceAddCount() ) nSpaceAdd = m_pCurr->GetLLSpaceAdd( nSpaceIdx ); else nSpaceAdd = 0; } if( pKanaComp && ( nKanaIdx + 1 ) < pKanaComp->size() ) ++nKanaIdx; } if ( !pPor->IsFlyPortion() || ( pPor->GetNextPortion() && !pPor->GetNextPortion()->IsMarginPortion() ) ) nX += pPor->PrtWidth(); } if( pPor->IsMultiPortion() && static_cast(pPor)->HasTabulator() ) { if ( m_pCurr->IsSpaceAdd() ) { if ( ++nSpaceIdx < m_pCurr->GetLLSpaceAddCount() ) nSpaceAdd = m_pCurr->GetLLSpaceAdd( nSpaceIdx ); else nSpaceAdd = 0; } if( pKanaComp && ( nKanaIdx + 1 ) < pKanaComp->size() ) ++nKanaIdx; } if( !pPor->IsFlyPortion() ) { nPorHeight = pPor->Height(); nPorAscent = pPor->GetAscent(); } pPor = pPor->GetNextPortion(); } if( aInf.GetIdx() == nOfst && pPor && pPor->InHyphGrp() && pPor->GetNextPortion() && pPor->GetNextPortion()->InFixGrp() ) { // All special portions have to be skipped // Taking the German word "zusammen" as example: zu-[FLY]sammen, 'u' == 19, 's' == 20; Right() // Without the adjustment we end up in front of '-', with the // adjustment in front of the 's'. while( pPor && !pPor->GetLen() ) { nX += pPor->Width(); if( !pPor->IsMarginPortion() ) { nPorHeight = pPor->Height(); nPorAscent = pPor->GetAscent(); } pPor = pPor->GetNextPortion(); } } if( pPor && pCMS ) { if( pCMS->m_bFieldInfo && pPor->InFieldGrp() && pPor->Width() ) pOrig->Width( pPor->Width() ); if( pPor->IsDropPortion() ) { nPorAscent = static_cast(pPor)->GetDropHeight(); // The drop height is only calculated, if we have more than // one line. Otherwise it is 0. if ( ! nPorAscent) nPorAscent = pPor->Height(); nPorHeight = nPorAscent; pOrig->Height( nPorHeight + static_cast(pPor)->GetDropDescent() ); if( nTmpHeight < pOrig->Height() ) { nTmpAscent = nPorAscent; nTmpHeight = sal_uInt16( pOrig->Height() ); } } if( bWidth && pPor->PrtWidth() && pPor->GetLen() && aInf.GetIdx() == nOfst ) { if( !pPor->IsFlyPortion() && pPor->Height() && pPor->GetAscent() ) { nPorHeight = pPor->Height(); nPorAscent = pPor->GetAscent(); } SwTwips nTmp; if (TextFrameIndex(2) > pPor->GetLen()) { nTmp = pPor->Width(); if ( pPor->InSpaceGrp() && nSpaceAdd ) nTmp += pPor->CalcSpacing( nSpaceAdd, aInf ); } else { const bool bOldOnWin = aInf.OnWin(); TextFrameIndex const nOldLen = pPor->GetLen(); pPor->SetLen( TextFrameIndex(1) ); aInf.SetLen( pPor->GetLen() ); SeekAndChg( aInf ); aInf.SetOnWin( false ); // no BULLETs! aInf.SetKanaComp( pKanaComp ); aInf.SetKanaIdx( nKanaIdx ); nTmp = pPor->GetTextSize( aInf ).Width(); aInf.SetOnWin( bOldOnWin ); if ( pPor->InSpaceGrp() && nSpaceAdd ) nTmp += pPor->CalcSpacing( nSpaceAdd, aInf ); pPor->SetLen( nOldLen ); } pOrig->Width( nTmp ); } // travel inside field portion? if ( pCMS->m_pSpecialPos ) { // apply attributes to font Seek( nOfst ); lcl_GetCharRectInsideField( aInf, *pOrig, *pCMS, *pPor ); } } } // special case: We are at the beginning of a BidiPortion or // directly behind a BidiPortion if ( pCMS && ( pLastBidiPor || ( pPor && pPor->IsMultiPortion() && static_cast(pPor)->IsBidi() ) ) ) { // we determine if the cursor has to blink before or behind // the bidi portion if ( pLastBidiPor ) { const sal_uInt8 nPortionLevel = pLastBidiPor->GetLevel(); if ( pCMS->m_nCursorBidiLevel >= nPortionLevel ) { // we came from inside the bidi portion, we want to blink // behind the portion pOrig->Pos().AdjustX( -nLastBidiPorWidth ); // Again, there is a special case: logically behind // the portion can actually mean that the cursor is inside // the portion. This can happen is the last portion // inside the bidi portion is a nested bidi portion SwLineLayout& rLineLayout = static_cast(pLastBidiPor)->GetRoot(); const SwLinePortion *pLast = rLineLayout.FindLastPortion(); if ( pLast->IsMultiPortion() ) { OSL_ENSURE( static_cast(pLast)->IsBidi(), "Non-BidiPortion inside BidiPortion" ); TextFrameIndex const nIdx = aInf.GetIdx(); // correct the index before using CalcSpacing. aInf.SetIdx(nLastBidiIdx); pOrig->Pos().AdjustX(pLast->Width() + pLast->CalcSpacing( nSpaceAdd, aInf ) ); aInf.SetIdx(nIdx); } } } else { const sal_uInt8 nPortionLevel = static_cast(pPor)->GetLevel(); if ( pCMS->m_nCursorBidiLevel >= nPortionLevel ) { // we came from inside the bidi portion, we want to blink // behind the portion pOrig->Pos().AdjustX(pPor->Width() + pPor->CalcSpacing( nSpaceAdd, aInf ) ); } } } pOrig->Pos().AdjustX(nX ); if ( pCMS && pCMS->m_bRealHeight ) { nTmpAscent = AdjustBaseLine( *m_pCurr, nullptr, nPorHeight, nPorAscent ); if ( nTmpAscent > nPorAscent ) pCMS->m_aRealHeight.setX( nTmpAscent - nPorAscent ); else pCMS->m_aRealHeight.setX( 0 ); OSL_ENSURE( nPorHeight, "GetCharRect: Missing Portion-Height" ); if ( nTmpHeight > nPorHeight ) pCMS->m_aRealHeight.setY( nPorHeight ); else pCMS->m_aRealHeight.setY( nTmpHeight ); } } } void SwTextCursor::GetCharRect( SwRect* pOrig, TextFrameIndex const nOfst, SwCursorMoveState* pCMS, const long nMax ) { CharCursorToLine(nOfst); // Indicates that a position inside a special portion (field, number portion) // is requested. const bool bSpecialPos = pCMS && pCMS->m_pSpecialPos; TextFrameIndex nFindOfst = nOfst; if ( bSpecialPos ) { const SwSPExtendRange nExtendRange = pCMS->m_pSpecialPos->nExtendRange; OSL_ENSURE( ! pCMS->m_pSpecialPos->nLineOfst || SwSPExtendRange::BEFORE != nExtendRange, "LineOffset AND Number Portion?" ); // portions which are behind the string if ( SwSPExtendRange::BEHIND == nExtendRange ) ++nFindOfst; // skip lines for fields which cover more than one line for ( sal_uInt16 i = 0; i < pCMS->m_pSpecialPos->nLineOfst; i++ ) Next(); } // If necessary, as catch up, do the adjustment GetAdjusted(); const Point aCharPos( GetTopLeft() ); GetCharRect_( pOrig, nFindOfst, pCMS ); // This actually would have to be "-1 LogicToPixel", but that seems too // expensive, so it's a value (-12), that should hopefully be OK. const SwTwips nTmpRight = Right() - 12; pOrig->Pos().AdjustX(aCharPos.X() ); pOrig->Pos().AdjustY(aCharPos.Y() ); if( pCMS && pCMS->m_b2Lines && pCMS->m_p2Lines ) { pCMS->m_p2Lines->aLine.Pos().AdjustX(aCharPos.X() ); pCMS->m_p2Lines->aLine.Pos().AdjustY(aCharPos.Y() ); pCMS->m_p2Lines->aPortion.Pos().AdjustX(aCharPos.X() ); pCMS->m_p2Lines->aPortion.Pos().AdjustY(aCharPos.Y() ); } const bool bTabOverMargin = GetTextFrame()->GetDoc().getIDocumentSettingAccess().get(DocumentSettingId::TAB_OVER_MARGIN); // Make sure the cursor respects the right margin, unless in compat mode, where the tab size has priority over the margin size. if( pOrig->Left() > nTmpRight && !bTabOverMargin) pOrig->Pos().setX( nTmpRight ); if( nMax ) { if( pOrig->Top() + pOrig->Height() > nMax ) { if( pOrig->Top() > nMax ) pOrig->Top( nMax ); pOrig->Height( nMax - pOrig->Top() ); } if ( pCMS && pCMS->m_bRealHeight && pCMS->m_aRealHeight.Y() >= 0 ) { long nTmp = pCMS->m_aRealHeight.X() + pOrig->Top(); if( nTmp >= nMax ) { pCMS->m_aRealHeight.setX( nMax - pOrig->Top() ); pCMS->m_aRealHeight.setY( 0 ); } else if( nTmp + pCMS->m_aRealHeight.Y() > nMax ) pCMS->m_aRealHeight.setY( nMax - nTmp ); } } long nOut = pOrig->Right() - GetTextFrame()->getFrameArea().Right(); if( nOut > 0 ) { if( GetTextFrame()->getFrameArea().Width() < GetTextFrame()->getFramePrintArea().Left() + GetTextFrame()->getFramePrintArea().Width() ) nOut += GetTextFrame()->getFrameArea().Width() - GetTextFrame()->getFramePrintArea().Left() - GetTextFrame()->getFramePrintArea().Width(); if( nOut > 0 ) pOrig->Pos().AdjustX( -(nOut + 10) ); } } /** * Determines if SwTextCursor::GetModelPositionForViewPoint() should consider the next portion when calculating the * doc model position from a Point. */ static bool ConsiderNextPortionForCursorOffset(const SwLinePortion* pPor, sal_uInt16 nWidth30, sal_uInt16 nX) { if (!pPor->GetNextPortion()) { return false; } // If we're past the target position, stop the iteration in general. // Exception: don't stop the iteration between as-char fly portions and their comments. if (nWidth30 >= nX && (!pPor->IsFlyCntPortion() || !pPor->GetNextPortion()->IsPostItsPortion())) { return false; } return !pPor->IsBreakPortion(); } // Return: Offset in String TextFrameIndex SwTextCursor::GetModelPositionForViewPoint( SwPosition *pPos, const Point &rPoint, bool bChgNode, SwCursorMoveState* pCMS ) const { // If necessary, as catch up, do the adjustment GetAdjusted(); const OUString &rText = GetInfo().GetText(); TextFrameIndex nOffset(0); // x is the horizontal offset within the line. SwTwips x = rPoint.X(); const SwTwips nLeftMargin = GetLineStart(); SwTwips nRightMargin = GetLineEnd() + ( GetCurr()->IsHanging() ? GetCurr()->GetHangingMargin() : 0 ); if( nRightMargin == nLeftMargin ) nRightMargin += 30; const bool bLeftOver = x < nLeftMargin; if( bLeftOver ) x = nLeftMargin; const bool bRightOver = x > nRightMargin; if( bRightOver ) x = nRightMargin; const bool bRightAllowed = pCMS && ( pCMS->m_eState == CursorMoveState::NONE ); // Until here everything in document coordinates. x -= nLeftMargin; sal_uInt16 nX = sal_uInt16( x ); // If there are attribute changes in the line, search for the paragraph, // in which nX is situated. SwLinePortion *pPor = m_pCurr->GetFirstPortion(); TextFrameIndex nCurrStart = m_nStart; bool bHolePortion = false; bool bLastHyph = false; std::deque *pKanaComp = m_pCurr->GetpKanaComp(); TextFrameIndex const nOldIdx = GetInfo().GetIdx(); sal_uInt16 nSpaceIdx = 0; size_t nKanaIdx = 0; long nSpaceAdd = m_pCurr->IsSpaceAdd() ? m_pCurr->GetLLSpaceAdd( 0 ) : 0; short nKanaComp = pKanaComp ? (*pKanaComp)[0] : 0; // nWidth is the width of the line, or the width of // the paragraph with the font change, in which nX is situated. sal_uInt16 nWidth = pPor->Width(); if ( m_pCurr->IsSpaceAdd() || pKanaComp ) { if ( pPor->InSpaceGrp() && nSpaceAdd ) { const_cast(GetInfo()).SetIdx( nCurrStart ); nWidth = nWidth + sal_uInt16( pPor->CalcSpacing( nSpaceAdd, GetInfo() ) ); } if( ( pPor->InFixMargGrp() && ! pPor->IsMarginPortion() ) || ( pPor->IsMultiPortion() && static_cast(pPor)->HasTabulator() ) ) { if ( m_pCurr->IsSpaceAdd() ) { if ( ++nSpaceIdx < m_pCurr->GetLLSpaceAddCount() ) nSpaceAdd = m_pCurr->GetLLSpaceAdd( nSpaceIdx ); else nSpaceAdd = 0; } if( pKanaComp ) { if ( nKanaIdx + 1 < pKanaComp->size() ) nKanaComp = (*pKanaComp)[++nKanaIdx]; else nKanaComp = 0; } } } sal_uInt16 nWidth30; if ( pPor->IsPostItsPortion() ) nWidth30 = 30 + pPor->GetViewWidth( GetInfo() ) / 2; else nWidth30 = ! nWidth && pPor->GetLen() && pPor->InToxRefOrFieldGrp() ? 30 : nWidth; while (ConsiderNextPortionForCursorOffset(pPor, nWidth30, nX)) { nX = nX - nWidth; nCurrStart = nCurrStart + pPor->GetLen(); bHolePortion = pPor->IsHolePortion(); pPor = pPor->GetNextPortion(); nWidth = pPor->Width(); if ( m_pCurr->IsSpaceAdd() || pKanaComp ) { if ( pPor->InSpaceGrp() && nSpaceAdd ) { const_cast(GetInfo()).SetIdx( nCurrStart ); nWidth = nWidth + sal_uInt16( pPor->CalcSpacing( nSpaceAdd, GetInfo() ) ); } if( ( pPor->InFixMargGrp() && ! pPor->IsMarginPortion() ) || ( pPor->IsMultiPortion() && static_cast(pPor)->HasTabulator() ) ) { if ( m_pCurr->IsSpaceAdd() ) { if ( ++nSpaceIdx < m_pCurr->GetLLSpaceAddCount() ) nSpaceAdd = m_pCurr->GetLLSpaceAdd( nSpaceIdx ); else nSpaceAdd = 0; } if ( pKanaComp ) { if( nKanaIdx + 1 < pKanaComp->size() ) nKanaComp = (*pKanaComp)[++nKanaIdx]; else nKanaComp = 0; } } } if ( pPor->IsPostItsPortion() ) nWidth30 = 30 + pPor->GetViewWidth( GetInfo() ) / 2; else nWidth30 = ! nWidth && pPor->GetLen() && pPor->InToxRefOrFieldGrp() ? 30 : nWidth; if( !pPor->IsFlyPortion() && !pPor->IsMarginPortion() ) bLastHyph = pPor->InHyphGrp(); } const bool bLastPortion = (nullptr == pPor->GetNextPortion()); if( nX==nWidth ) { SwLinePortion *pNextPor = pPor->GetNextPortion(); while( pNextPor && pNextPor->InFieldGrp() && !pNextPor->Width() ) { nCurrStart = nCurrStart + pPor->GetLen(); pPor = pNextPor; if( !pPor->IsFlyPortion() && !pPor->IsMarginPortion() ) bLastHyph = pPor->InHyphGrp(); pNextPor = pPor->GetNextPortion(); } } const_cast(GetInfo()).SetIdx( nOldIdx ); TextFrameIndex nLength = pPor->GetLen(); const bool bFieldInfo = pCMS && pCMS->m_bFieldInfo; if( bFieldInfo && ( nWidth30 < nX || bRightOver || bLeftOver || ( pPor->InNumberGrp() && !pPor->IsFootnoteNumPortion() ) || ( pPor->IsMarginPortion() && nWidth > nX + 30 ) ) ) pCMS->m_bPosCorr = true; // #i27615# if (pCMS && pCMS->m_bInFrontOfLabel) { if (! (2 * nX < nWidth && pPor->InNumberGrp() && !pPor->IsFootnoteNumPortion())) pCMS->m_bInFrontOfLabel = false; } // 7684: We are exactly ended up at their HyphPortion. It is our task to // provide, that we end up in the String. // 7993: If length = 0, then we must exit... if( !nLength ) { if( pCMS ) { if( pPor->IsFlyPortion() && bFieldInfo ) pCMS->m_bPosCorr = true; if (!bRightOver && nX) { if( pPor->IsFootnoteNumPortion()) pCMS->m_bFootnoteNoInfo = true; else if (pPor->InNumberGrp() ) // #i23726# { pCMS->m_nInNumPortionOffset = nX; pCMS->m_bInNumPortion = true; } } } if( !nCurrStart ) return TextFrameIndex(0); // 7849, 7816: pPor->GetHyphPortion is mandatory! if( bHolePortion || ( !bRightAllowed && bLastHyph ) || ( pPor->IsMarginPortion() && !pPor->GetNextPortion() && // 46598: Consider the situation: We might end up behind the last character, // in the last line of a centered paragraph nCurrStart < TextFrameIndex(rText.getLength()))) --nCurrStart; else if( pPor->InFieldGrp() && static_cast(pPor)->IsFollow() && nWidth > nX ) { if( bFieldInfo ) --nCurrStart; else { sal_uInt16 nHeight = pPor->Height(); if ( !nHeight || nHeight > nWidth ) nHeight = nWidth; if( bChgNode && nWidth - nHeight/2 > nX ) --nCurrStart; } } return nCurrStart; } if (TextFrameIndex(1) == nLength) { if ( nWidth ) { // no quick return for as-character frames, we want to peek inside if (!(bChgNode && pPos && pPor->IsFlyCntPortion()) // if we want to get the position inside the field, we should not return && (!pCMS || !pCMS->m_pSpecialPos)) { if ( pPor->InFieldGrp() || ( pPor->IsMultiPortion() && static_cast(pPor)->IsBidi() ) ) { sal_uInt16 nHeight = 0; if( !bFieldInfo ) { nHeight = pPor->Height(); if ( !nHeight || nHeight > nWidth ) nHeight = nWidth; } if( nWidth - nHeight/2 <= nX && ( ! pPor->InFieldGrp() || !static_cast(pPor)->HasFollow() ) ) ++nCurrStart; } else if ( ( !pPor->IsFlyPortion() || ( pPor->GetNextPortion() && !pPor->GetNextPortion()->IsMarginPortion() && !pPor->GetNextPortion()->IsHolePortion() ) ) && ( nWidth/2 < nX ) && ( !bFieldInfo || ( pPor->GetNextPortion() && pPor->GetNextPortion()->IsPostItsPortion() ) ) && ( bRightAllowed || !bLastHyph )) ++nCurrStart; return nCurrStart; } } else { if ( pPor->IsPostItsPortion() || pPor->IsBreakPortion() || pPor->InToxRefGrp() ) { if (pPor->IsPostItsPortion()) { // Offset would be nCurrStart + nLength below, do the same for post-it portions. nCurrStart += pPor->GetLen(); } return nCurrStart; } if ( pPor->InFieldGrp() ) { if( bRightOver && !static_cast(pPor)->HasFollow() ) ++nCurrStart; return nCurrStart; } } } // Skip space at the end of the line if( bLastPortion && (m_pCurr->GetNext() || m_pFrame->GetFollow() ) && rText[sal_Int32(nCurrStart + nLength) - 1] == ' ' ) --nLength; if( nWidth > nX || ( nWidth == nX && pPor->IsMultiPortion() && static_cast(pPor)->IsDouble() ) ) { if( pPor->IsMultiPortion() ) { // In a multi-portion we use GetModelPositionForViewPoint()-function recursively SwTwips nTmpY = rPoint.Y() - m_pCurr->GetAscent() + pPor->GetAscent(); // if we are in the first line of a double line portion, we have // to add a value to nTmpY for not staying in this line // we also want to skip the first line, if we are inside ruby if ( ( static_cast(m_pInf)->IsMulti() && static_cast(m_pInf)->IsFirstMulti() ) || ( static_cast(pPor)->IsRuby() && static_cast(pPor)->OnTop() ) ) nTmpY += static_cast(pPor)->Height(); // Important for cursor traveling in ruby portions: // We have to set nTmpY to 0 in order to stay in the first row // if the phonetic line is the second row if ( static_cast(pPor)->IsRuby() && ! static_cast(pPor)->OnTop() ) nTmpY = 0; SwTextCursorSave aSave( const_cast(this), static_cast(pPor), nTmpY, nX, nCurrStart, nSpaceAdd ); SwLayoutModeModifier aLayoutModeModifier( *GetInfo().GetOut() ); if ( static_cast(pPor)->IsBidi() ) { const sal_uInt8 nBidiLevel = static_cast(pPor)->GetLevel(); aLayoutModeModifier.Modify( nBidiLevel % 2 ); } if( static_cast(pPor)->HasRotation() ) { nTmpY -= m_nY; if( !static_cast(pPor)->IsRevers() ) nTmpY = pPor->Height() - nTmpY; if( nTmpY < 0 ) nTmpY = 0; nX = static_cast(nTmpY); } if( static_cast(pPor)->HasBrackets() ) { const sal_uInt16 nPreWidth = static_cast(pPor)->PreWidth(); if ( nX > nPreWidth ) nX = nX - nPreWidth; else nX = 0; } return GetModelPositionForViewPoint( pPos, Point( GetLineStart() + nX, rPoint.Y() ), bChgNode, pCMS ); } if( pPor->InTextGrp() ) { sal_uInt8 nOldProp; if( GetPropFont() ) { const_cast(GetFnt())->SetProportion( GetPropFont() ); nOldProp = GetFnt()->GetPropr(); } else nOldProp = 0; { SwTextSizeInfo aSizeInf( GetInfo(), &rText, nCurrStart ); const_cast(this)->SeekAndChg( aSizeInf ); SwTextSlot aDiffText( &aSizeInf, static_cast(pPor), false, false ); SwFontSave aSave( aSizeInf, pPor->IsDropPortion() ? static_cast(pPor)->GetFnt() : nullptr ); SwParaPortion* pPara = const_cast(GetInfo().GetParaPortion()); OSL_ENSURE( pPara, "No paragraph!" ); SwDrawTextInfo aDrawInf( aSizeInf.GetVsh(), *aSizeInf.GetOut(), &pPara->GetScriptInfo(), aSizeInf.GetText(), aSizeInf.GetIdx(), pPor->GetLen() ); // Drop portion works like a multi portion, just its parts are not portions if( pPor->IsDropPortion() && static_cast(pPor)->GetLines() > 1 ) { SwDropPortion* pDrop = static_cast(pPor); const SwDropPortionPart* pCurrPart = pDrop->GetPart(); sal_uInt16 nSumWidth = 0; sal_uInt16 nSumBorderWidth = 0; // Shift offset with the right and left border of previous parts and left border of actual one while (pCurrPart && nSumWidth <= nX - sal_Int32(nCurrStart)) { nSumWidth += pCurrPart->GetWidth(); if( pCurrPart->GetFont().GetLeftBorder() && !pCurrPart->GetJoinBorderWithPrev() ) { nSumBorderWidth += pCurrPart->GetFont().GetLeftBorderSpace(); } if (nSumWidth <= nX - sal_Int32(nCurrStart) && pCurrPart->GetFont().GetRightBorder() && !pCurrPart->GetJoinBorderWithNext() ) { nSumBorderWidth += pCurrPart->GetFont().GetRightBorderSpace(); } pCurrPart = pCurrPart->GetFollow(); } nX = std::max(0, nX - nSumBorderWidth); } // Shift the offset with the left border width else if( GetInfo().GetFont()->GetLeftBorder() && !pPor->GetJoinBorderWithPrev() ) { nX = std::max(0, nX - GetInfo().GetFont()->GetLeftBorderSpace()); } aDrawInf.SetOffset( nX ); if ( nSpaceAdd ) { TextFrameIndex nCharCnt(0); // #i41860# Thai justified alignment needs some // additional information: aDrawInf.SetNumberOfBlanks( pPor->InTextGrp() ? static_cast(pPor)->GetSpaceCnt( aSizeInf, nCharCnt ) : TextFrameIndex(0) ); } if ( pPor->InFieldGrp() && pCMS && pCMS->m_pSpecialPos ) aDrawInf.SetLen( TextFrameIndex(COMPLETE_STRING) ); aDrawInf.SetSpace( nSpaceAdd ); aDrawInf.SetFont( aSizeInf.GetFont() ); aDrawInf.SetFrame( m_pFrame ); aDrawInf.SetSnapToGrid( aSizeInf.SnapToGrid() ); aDrawInf.SetPosMatchesBounds( pCMS && pCMS->m_bPosMatchesBounds ); if ( SwFontScript::CJK == aSizeInf.GetFont()->GetActual() && pPara->GetScriptInfo().CountCompChg() && ! pPor->InFieldGrp() ) aDrawInf.SetKanaComp( nKanaComp ); nLength = aSizeInf.GetFont()->GetModelPositionForViewPoint_( aDrawInf ); // get position inside field portion? if ( pPor->InFieldGrp() && pCMS && pCMS->m_pSpecialPos ) { pCMS->m_pSpecialPos->nCharOfst = sal_Int32(nLength); nLength = TextFrameIndex(0); } // set cursor bidi level if ( pCMS ) pCMS->m_nCursorBidiLevel = aDrawInf.GetCursorBidiLevel(); if( bFieldInfo && nLength == pPor->GetLen() && ( ! pPor->GetNextPortion() || ! pPor->GetNextPortion()->IsPostItsPortion() ) ) --nLength; } if( nOldProp ) const_cast(GetFnt())->SetProportion( nOldProp ); } else { sw::FlyContentPortion* pFlyPor(nullptr); if(bChgNode && pPos && (pFlyPor = dynamic_cast(pPor))) { // JP 24.11.94: if the Position is not in Fly, then // we many not return with COMPLETE_STRING as value! // (BugId: 9692 + Change in feshview) SwFlyInContentFrame *pTmp = pFlyPor->GetFlyFrame(); SwFrame* pLower = pTmp->GetLower(); bool bChgNodeInner = pLower && (pLower->IsTextFrame() || pLower->IsLayoutFrame()); Point aTmpPoint( rPoint ); if ( m_pFrame->IsRightToLeft() ) m_pFrame->SwitchLTRtoRTL( aTmpPoint ); if ( m_pFrame->IsVertical() ) m_pFrame->SwitchHorizontalToVertical( aTmpPoint ); if( bChgNodeInner && pTmp->getFrameArea().IsInside( aTmpPoint ) && !( pTmp->IsProtected() ) ) { pFlyPor->GetFlyCursorOfst(aTmpPoint, *pPos, pCMS); // After a change of the frame, our font must be still // available for/in the OutputDevice. // For comparison: Paint and new SwFlyCntPortion ! static_cast(m_pInf)->SelectFont(); // 6776: The pIter->GetModelPositionForViewPoint is returning here // from a nesting with COMPLETE_STRING. return TextFrameIndex(COMPLETE_STRING); } } else nLength = pPor->GetModelPositionForViewPoint( nX ); } } nOffset = nCurrStart + nLength; // 7684: We end up in front of the HyphPortion. We must assure // that we end up in the string. // If we are at end of line in front of FlyFrames, we must proceed the same way. if( nOffset && pPor->GetLen() == nLength && pPor->GetNextPortion() && !pPor->GetNextPortion()->GetLen() && pPor->GetNextPortion()->InHyphGrp() ) --nOffset; return nOffset; } /** Looks for text portions which are inside the given rectangle For a rectangular text selection every text portions which is inside the given rectangle has to be put into the SwSelectionList as SwPaM From these SwPaM the SwCursors will be created. @param rSelList The container for the overlapped text portions @param rRect A rectangle in document coordinates, text inside this rectangle has to be selected. @return [ true, false ] true if any overlapping text portion has been found and put into list false if no portion overlaps, the list has been unchanged */ bool SwTextFrame::FillSelection( SwSelectionList& rSelList, const SwRect& rRect ) const { bool bRet = false; // GetPaintArea() instead getFrameArea() for negative indents SwRect aTmpFrame( GetPaintArea() ); if( !rRect.IsOver( aTmpFrame ) ) return false; if( rSelList.checkContext( this ) ) { SwRect aRect( aTmpFrame ); aRect.Intersection( rRect ); SwPosition aPosL( MapViewToModelPos(TextFrameIndex(0)) ); if( IsEmpty() ) { SwPaM *pPam = new SwPaM( aPosL, aPosL ); rSelList.insertPaM( pPam ); } else if( aRect.HasArea() ) { SwPosition aOld(aPosL.nNode.GetNodes().GetEndOfContent()); SwPosition aPosR( aPosL ); Point aPoint; SwTextInfo aInf( const_cast(this) ); SwTextIter aLine( const_cast(this), &aInf ); // We have to care for top-to-bottom layout, where right becomes top etc. SwRectFnSet aRectFnSet(this); SwTwips nTop = aRectFnSet.GetTop(aRect); SwTwips nBottom = aRectFnSet.GetBottom(aRect); SwTwips nLeft = aRectFnSet.GetLeft(aRect); SwTwips nRight = aRectFnSet.GetRight(aRect); SwTwips nY = aLine.Y(); // Top position of the first line SwTwips nLastY = nY; while( nY < nTop && aLine.Next() ) // line above rectangle { nLastY = nY; nY = aLine.Y(); } bool bLastLine = false; if( nY < nTop && !aLine.GetNext() ) { bLastLine = true; nY += aLine.GetLineHeight(); } do // check the lines for overlapping { if( nLastY < nTop ) // if the last line was above rectangle nLastY = nTop; if( nY > nBottom ) // if the current line leaves the rectangle nY = nBottom; if( nY >= nLastY ) // gotcha: overlapping { nLastY += nY; nLastY /= 2; if( aRectFnSet.IsVert() ) { aPoint.setX( nLastY ); aPoint.setY( nLeft ); } else { aPoint.setX( nLeft ); aPoint.setY( nLastY ); } // Looking for the position of the left border of the rectangle // in this text line SwCursorMoveState aState( CursorMoveState::UpDown ); if( GetModelPositionForViewPoint( &aPosL, aPoint, &aState ) ) { if( aRectFnSet.IsVert() ) { aPoint.setX( nLastY ); aPoint.setY( nRight ); } else { aPoint.setX( nRight ); aPoint.setY( nLastY ); } // If we get a right position and if the left position // is not the same like the left position of the line before // which could happen e.g. for field portions or fly frames // a SwPaM will be inserted with these positions if( GetModelPositionForViewPoint( &aPosR, aPoint, &aState ) && aOld != aPosL) { SwPaM *pPam = new SwPaM( aPosL, aPosR ); rSelList.insertPaM( pPam ); aOld = aPosL; } } } if( aLine.Next() ) { nLastY = nY; nY = aLine.Y(); } else if( !bLastLine ) { bLastLine = true; nLastY = nY; nY += aLine.GetLineHeight(); } else break; }while( nLastY < nBottom ); } } if( GetDrawObjs() ) { const SwSortedObjs &rObjs = *GetDrawObjs(); for (SwAnchoredObject* pAnchoredObj : rObjs) { if( dynamic_cast< const SwFlyFrame *>( pAnchoredObj ) == nullptr ) continue; const SwFlyFrame* pFly = static_cast(pAnchoredObj); if( pFly->IsFlyInContentFrame() && pFly->FillSelection( rSelList, rRect ) ) bRet = true; } } return bRet; } /* vim:set shiftwidth=4 softtabstop=4 expandtab: */