/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the LibreOffice project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. * * This file incorporates work covered by the following license notice: * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed * with this work for additional information regarding copyright * ownership. The ASF licenses this file to you under the Apache * License, Version 2.0 (the "License"); you may not use this file * except in compliance with the License. You may obtain a copy of * the License at http://www.apache.org/licenses/LICENSE-2.0 . */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include using namespace vcl; using namespace com::sun::star; using namespace com::sun::star::uno; using namespace com::sun::star::lang; using namespace com::sun::star::container; using namespace com::sun::star::beans; enum { ORIENTATION_AUTOMATIC, ORIENTATION_PORTRAIT, ORIENTATION_LANDSCAPE }; namespace { bool lcl_ListBoxCompare( const OUString& rStr1, const OUString& rStr2 ) { return vcl::NaturalSortCompare( rStr1, rStr2 ) < 0; } } MoreOptionsDialog::MoreOptionsDialog(PrintDialog* i_pParent) : GenericDialogController(i_pParent->getDialog(), "vcl/ui/moreoptionsdialog.ui", "MoreOptionsDialog") , mpParent( i_pParent ) , mxOKButton(m_xBuilder->weld_button("ok")) , mxCancelButton(m_xBuilder->weld_button("cancel")) , mxSingleJobsBox(m_xBuilder->weld_check_button("singlejobs")) { mxSingleJobsBox->set_active( mpParent->isSingleJobs() ); mxOKButton->connect_clicked( LINK( this, MoreOptionsDialog, ClickHdl ) ); mxCancelButton->connect_clicked( LINK( this, MoreOptionsDialog, ClickHdl ) ); } MoreOptionsDialog::~MoreOptionsDialog() { } IMPL_LINK (MoreOptionsDialog, ClickHdl, weld::Button&, rButton, void) { if (&rButton == mxOKButton.get()) { mpParent->mbSingleJobs = mxSingleJobsBox->get_active(); m_xDialog->response(RET_OK); } else if (&rButton == mxCancelButton.get()) { m_xDialog->response(RET_CANCEL); } } PrintDialog::PrintPreviewWindow::PrintPreviewWindow(PrintDialog* pDialog) : mpDialog(pDialog) , maMtf() , maOrigSize( 10, 10 ) , maPreviewSize() , mnDPIX(Application::GetDefaultDevice()->GetDPIX()) , mnDPIY(Application::GetDefaultDevice()->GetDPIY()) , maPreviewBitmap() , maReplacementString() , mbGreyscale( false ) { } PrintDialog::PrintPreviewWindow::~PrintPreviewWindow() { } void PrintDialog::PrintPreviewWindow::Resize() { Size aNewSize(GetOutputSizePixel()); long nTextHeight = GetDrawingArea()->get_text_height(); // leave small space for decoration aNewSize.AdjustWidth( -(nTextHeight + 2) ); aNewSize.AdjustHeight( -(nTextHeight + 2) ); Size aScaledSize; double fScale = 1.0; // #i106435# catch corner case of Size(0,0) Size aOrigSize( maOrigSize ); if( aOrigSize.Width() < 1 ) aOrigSize.setWidth( aNewSize.Width() ); if( aOrigSize.Height() < 1 ) aOrigSize.setHeight( aNewSize.Height() ); if( aOrigSize.Width() > aOrigSize.Height() ) { aScaledSize = Size( aNewSize.Width(), aNewSize.Width() * aOrigSize.Height() / aOrigSize.Width() ); if( aScaledSize.Height() > aNewSize.Height() ) fScale = double(aNewSize.Height())/double(aScaledSize.Height()); } else { aScaledSize = Size( aNewSize.Height() * aOrigSize.Width() / aOrigSize.Height(), aNewSize.Height() ); if( aScaledSize.Width() > aNewSize.Width() ) fScale = double(aNewSize.Width())/double(aScaledSize.Width()); } aScaledSize.setWidth( long(aScaledSize.Width()*fScale) ); aScaledSize.setHeight( long(aScaledSize.Height()*fScale) ); maPreviewSize = aScaledSize; // check and evtl. recreate preview bitmap preparePreviewBitmap(); } void PrintDialog::PrintPreviewWindow::SetDrawingArea(weld::DrawingArea* pDrawingArea) { pDrawingArea->set_size_request(pDrawingArea->get_approximate_digit_width() * 45, pDrawingArea->get_text_height() * 30); CustomWidgetController::SetDrawingArea(pDrawingArea); } void PrintDialog::PrintPreviewWindow::Paint(vcl::RenderContext& rRenderContext, const tools::Rectangle&) { rRenderContext.Push(); if (vcl::Window* pDefaultDevice = dynamic_cast(Application::GetDefaultDevice())) { Font aFont(rRenderContext.GetSettings().GetStyleSettings().GetLabelFont()); pDefaultDevice->SetPointFont(rRenderContext, aFont); } rRenderContext.SetBackground(Wallpaper(Application::GetSettings().GetStyleSettings().GetDialogColor())); rRenderContext.Erase(); auto nTextHeight = rRenderContext.GetTextHeight(); Size aSize(GetOutputSizePixel()); Point aOffset((aSize.Width() - maPreviewSize.Width() + nTextHeight) / 2, (aSize.Height() - maPreviewSize.Height() + nTextHeight) / 2); // horizontal line { auto nWidth = rRenderContext.GetTextWidth(maHorzText); auto nStart = aOffset.X() + (maPreviewSize.Width() - nWidth) / 2; rRenderContext.DrawText(Point(nStart, aOffset.Y() - nTextHeight), maHorzText, 0, maHorzText.getLength()); DecorationView aDecoView(&rRenderContext); auto nTop = aOffset.Y() - (nTextHeight / 2); aDecoView.DrawSeparator(Point(aOffset.X(), nTop), Point(nStart - 2, nTop), false); aDecoView.DrawSeparator(Point(nStart + nWidth + 2, nTop), Point(aOffset.X() + maPreviewSize.Width(), nTop), false); } // vertical line { rRenderContext.Push(PushFlags::FONT); vcl::Font aFont(rRenderContext.GetFont()); aFont.SetOrientation(900); rRenderContext.SetFont(aFont); auto nLeft = aOffset.X() - nTextHeight; auto nWidth = rRenderContext.GetTextWidth(maVertText); auto nStart = aOffset.Y() + (maPreviewSize.Height() + nWidth) / 2; rRenderContext.DrawText(Point(nLeft, nStart), maVertText, 0, maVertText.getLength()); DecorationView aDecoView(&rRenderContext); nLeft = aOffset.X() - (nTextHeight / 2); aDecoView.DrawSeparator(Point(nLeft, aOffset.Y()), Point(nLeft, nStart - nWidth - 2), true); aDecoView.DrawSeparator(Point(nLeft, nStart + 2), Point(nLeft, aOffset.Y() + maPreviewSize.Height()), true); rRenderContext.Pop(); } if (!maReplacementString.isEmpty()) { // replacement is active tools::Rectangle aTextRect(aOffset + Point(2, 2), Size(maPreviewSize.Width() - 4, maPreviewSize.Height() - 4)); rRenderContext.DrawText(aTextRect, maReplacementString, DrawTextFlags::Center | DrawTextFlags::VCenter | DrawTextFlags::WordBreak | DrawTextFlags::MultiLine); } else { BitmapEx aPreviewBitmap(maPreviewBitmap); // This explicit force-to-scale allows us to get the // mentioned best quality here. Unfortunately this is // currently not sure when using just ::DrawBitmap with // a defined size or ::DrawOutDev aPreviewBitmap.Scale(maPreviewSize, BmpScaleFlag::BestQuality); rRenderContext.DrawBitmapEx(aOffset, aPreviewBitmap); } tools::Rectangle aFrameRect(aOffset + Point(-1, -1), Size(maPreviewSize.Width() + 2, maPreviewSize.Height() + 2)); DecorationView aDecorationView(&rRenderContext); aDecorationView.DrawFrame(aFrameRect, DrawFrameStyle::Group); rRenderContext.Pop(); } bool PrintDialog::PrintPreviewWindow::Command( const CommandEvent& rEvt ) { if( rEvt.GetCommand() == CommandEventId::Wheel ) { const CommandWheelData* pWheelData = rEvt.GetWheelData(); if(pWheelData->GetDelta() > 0) mpDialog->previewForward(); else if (pWheelData->GetDelta() < 0) mpDialog->previewBackward(); return true; } return CustomWidgetController::Command(rEvt); } void PrintDialog::PrintPreviewWindow::setPreview( const GDIMetaFile& i_rNewPreview, const Size& i_rOrigSize, const OUString& i_rPaperName, const OUString& i_rReplacement, sal_Int32 i_nDPIX, sal_Int32 i_nDPIY, bool i_bGreyscale ) { maMtf = i_rNewPreview; mnDPIX = i_nDPIX; mnDPIY = i_nDPIY; maOrigSize = i_rOrigSize; maReplacementString = i_rReplacement; mbGreyscale = i_bGreyscale; // use correct measurements const LocaleDataWrapper& rLocWrap(Application::GetSettings().GetLocaleDataWrapper()); MapUnit eUnit = MapUnit::MapMM; int nDigits = 0; if( rLocWrap.getMeasurementSystemEnum() == MeasurementSystem::US ) { eUnit = MapUnit::Map100thInch; nDigits = 2; } Size aLogicPaperSize(OutputDevice::LogicToLogic(i_rOrigSize, MapMode(MapUnit::Map100thMM), MapMode(eUnit))); OUString aNumText( rLocWrap.getNum( aLogicPaperSize.Width(), nDigits ) ); OUStringBuffer aBuf; aBuf.append( aNumText ) .append( u' ' ); aBuf.appendAscii( eUnit == MapUnit::MapMM ? "mm" : "in" ); if( !i_rPaperName.isEmpty() ) { aBuf.append( " (" ); aBuf.append( i_rPaperName ); aBuf.append( ')' ); } maHorzText = aBuf.makeStringAndClear(); aNumText = rLocWrap.getNum( aLogicPaperSize.Height(), nDigits ); aBuf.append( aNumText ) .append( u' ' ); aBuf.appendAscii( eUnit == MapUnit::MapMM ? "mm" : "in" ); maVertText = aBuf.makeStringAndClear(); // We have a new Metafile and evtl. a new page, so we need to reset // the PreviewBitmap to force new creation maPreviewBitmap = Bitmap(); // sets/calculates e.g. maPreviewSize // also triggers preparePreviewBitmap() Resize(); Invalidate(); } void PrintDialog::PrintPreviewWindow::preparePreviewBitmap() { if(maPreviewSize.IsEmpty()) { // not yet fully initialized, no need to prepare anything return; } // define an allowed number of pixels, also see // defaults for primitive renderers and similar. This // might be centralized and made dependent of 32/64bit const sal_uInt32 nMaxSquarePixels(500000); // check how big (squarePixels) the preview is currently (with // max value of MaxSquarePixels) const sal_uInt32 nCurrentSquarePixels( std::min( nMaxSquarePixels, static_cast(maPreviewBitmap.GetSizePixel().getWidth()) * static_cast(maPreviewBitmap.GetSizePixel().getHeight()))); // check how big (squarePixels) the preview needs to be (with // max value of MaxSquarePixels) const sal_uInt32 nRequiredSquarePixels( std::min( nMaxSquarePixels, static_cast(maPreviewSize.getWidth()) * static_cast(maPreviewSize.getHeight()))); // check if preview is big enough. Use a scaling value in // the comparison to not get bigger at the last possible moment // what may look awkward and pixelated (again). This means // to use a percentage value - if we have at least // that value of required pixels, we are good. static const double fPreventAwkwardFactor(1.35); // 35% if(nCurrentSquarePixels >= static_cast(nRequiredSquarePixels * fPreventAwkwardFactor)) { // at this place we also could add a mechanism to let the preview // bitmap 'shrink' again if it is currently 'too big' -> bigger // than required. I think this is not necessary for now. // already sufficient, done. return; } // check if we have enough square pixels e.g for 8x8 pixels if(nRequiredSquarePixels < 64) { // too small preview - let it empty return; } // Calculate nPlannedSquarePixels which is the required size // expanded by a percentage (with max value of MaxSquarePixels) static const double fExtraSpaceFactor(1.65); // 65% const sal_uInt32 nPlannedSquarePixels( std::min( nMaxSquarePixels, static_cast(maPreviewSize.getWidth() * fExtraSpaceFactor) * static_cast(maPreviewSize.getHeight() * fExtraSpaceFactor))); // calculate back new width and height - it might have been // truncated by MaxSquarePixels. // We know that w*h == nPlannedSquarePixels and w/h == ratio const double fRatio(static_cast(maPreviewSize.getWidth()) / static_cast(maPreviewSize.getHeight())); const double fNewWidth(sqrt(static_cast(nPlannedSquarePixels) * fRatio)); const double fNewHeight(sqrt(static_cast(nPlannedSquarePixels) / fRatio)); const Size aScaledSize(basegfx::fround(fNewWidth), basegfx::fround(fNewHeight)); // check if this eventual maximum is already reached // due to having hit the MaxSquarePixels. Due to using // an integer AspectRatio, we cannot make a numeric exact // comparison - we need to compare if we are close const double fScaledSizeSquare(static_cast(aScaledSize.getWidth() * aScaledSize.getHeight())); const double fPreviewSizeSquare(static_cast(maPreviewBitmap.GetSizePixel().getWidth() * maPreviewBitmap.GetSizePixel().getHeight())); // test as equal up to 0.1% (0.001) if(fPreviewSizeSquare != 0.0 && fabs((fScaledSizeSquare / fPreviewSizeSquare) - 1.0) < 0.001) { // maximum is reached, avoid bigger scaling return; } // create temporary VDev and render to it ScopedVclPtrInstance pPrerenderVDev(*Application::GetDefaultDevice()); pPrerenderVDev->SetOutputSizePixel(aScaledSize, false); pPrerenderVDev->SetReferenceDevice( mnDPIX, mnDPIY ); pPrerenderVDev->EnableOutput(); pPrerenderVDev->SetBackground( Wallpaper(COL_WHITE) ); GDIMetaFile aMtf( maMtf ); Size aVDevSize( pPrerenderVDev->GetOutputSizePixel() ); const Size aLogicSize( pPrerenderVDev->PixelToLogic( aVDevSize, MapMode( MapUnit::Map100thMM ) ) ); Size aOrigSize( maOrigSize ); if( aOrigSize.Width() < 1 ) aOrigSize.setWidth( aLogicSize.Width() ); if( aOrigSize.Height() < 1 ) aOrigSize.setHeight( aLogicSize.Height() ); double fScale = double(aLogicSize.Width())/double(aOrigSize.Width()); pPrerenderVDev->Erase(); pPrerenderVDev->Push(); pPrerenderVDev->SetMapMode(MapMode(MapUnit::Map100thMM)); DrawModeFlags nOldDrawMode = pPrerenderVDev->GetDrawMode(); if( mbGreyscale ) pPrerenderVDev->SetDrawMode( pPrerenderVDev->GetDrawMode() | ( DrawModeFlags::GrayLine | DrawModeFlags::GrayFill | DrawModeFlags::GrayText | DrawModeFlags::GrayBitmap | DrawModeFlags::GrayGradient ) ); aMtf.WindStart(); aMtf.Scale( fScale, fScale ); aMtf.WindStart(); const AntialiasingFlags nOriginalAA(pPrerenderVDev->GetAntialiasing()); pPrerenderVDev->SetAntialiasing(nOriginalAA | AntialiasingFlags::EnableB2dDraw); aMtf.Play( pPrerenderVDev.get(), Point( 0, 0 ), aLogicSize ); pPrerenderVDev->SetAntialiasing(nOriginalAA); pPrerenderVDev->Pop(); pPrerenderVDev->SetMapMode(MapMode(MapUnit::MapPixel)); maPreviewBitmap = pPrerenderVDev->GetBitmapEx(Point(0, 0), aVDevSize); pPrerenderVDev->SetDrawMode( nOldDrawMode ); } PrintDialog::ShowNupOrderWindow::ShowNupOrderWindow() : mnOrderMode( NupOrderType::LRTB ) , mnRows( 1 ) , mnColumns( 1 ) { } void PrintDialog::ShowNupOrderWindow::SetDrawingArea(weld::DrawingArea* pDrawingArea) { Size aSize(70, 70); pDrawingArea->set_size_request(aSize.Width(), aSize.Height()); CustomWidgetController::SetDrawingArea(pDrawingArea); SetOutputSizePixel(aSize); } void PrintDialog::ShowNupOrderWindow::Paint(vcl::RenderContext& rRenderContext, const tools::Rectangle& /*i_rRect*/) { rRenderContext.SetMapMode(MapMode(MapUnit::MapPixel)); rRenderContext.SetTextColor(rRenderContext.GetSettings().GetStyleSettings().GetFieldTextColor()); rRenderContext.SetBackground(Wallpaper(Application::GetSettings().GetStyleSettings().GetFieldColor())); rRenderContext.Erase(); int nPages = mnRows * mnColumns; Font aFont(rRenderContext.GetSettings().GetStyleSettings().GetFieldFont()); aFont.SetFontSize(Size(0, 24)); rRenderContext.SetFont(aFont); Size aSampleTextSize(rRenderContext.GetTextWidth(OUString::number(nPages + 1)), rRenderContext.GetTextHeight()); Size aOutSize(GetOutputSizePixel()); Size aSubSize(aOutSize.Width() / mnColumns, aOutSize.Height() / mnRows); // calculate font size: shrink the sample text so it fits double fX = double(aSubSize.Width()) / double(aSampleTextSize.Width()); double fY = double(aSubSize.Height()) / double(aSampleTextSize.Height()); double fScale = (fX < fY) ? fX : fY; long nFontHeight = long(24.0 * fScale) - 3; if (nFontHeight < 5) nFontHeight = 5; aFont.SetFontSize(Size( 0, nFontHeight)); rRenderContext.SetFont(aFont); long nTextHeight = rRenderContext.GetTextHeight(); for (int i = 0; i < nPages; i++) { OUString aPageText(OUString::number(i + 1)); int nX = 0, nY = 0; switch (mnOrderMode) { case NupOrderType::LRTB: nX = (i % mnColumns); nY = (i / mnColumns); break; case NupOrderType::TBLR: nX = (i / mnRows); nY = (i % mnRows); break; case NupOrderType::RLTB: nX = mnColumns - 1 - (i % mnColumns); nY = (i / mnColumns); break; case NupOrderType::TBRL: nX = mnColumns - 1 - (i / mnRows); nY = (i % mnRows); break; } Size aTextSize(rRenderContext.GetTextWidth(aPageText), nTextHeight); int nDeltaX = (aSubSize.Width() - aTextSize.Width()) / 2; int nDeltaY = (aSubSize.Height() - aTextSize.Height()) / 2; rRenderContext.DrawText(Point(nX * aSubSize.Width() + nDeltaX, nY * aSubSize.Height() + nDeltaY), aPageText); } DecorationView aDecorationView(&rRenderContext); aDecorationView.DrawFrame(tools::Rectangle(Point(0, 0), aOutSize), DrawFrameStyle::Group); } Size const & PrintDialog::getJobPageSize() { if( maFirstPageSize.IsEmpty() ) { maFirstPageSize = maNupPortraitSize; GDIMetaFile aMtf; if( maPController->getPageCountProtected() > 0 ) { PrinterController::PageSize aPageSize = maPController->getPageFile( 0, aMtf, true ); maFirstPageSize = aPageSize.aSize; } } return maFirstPageSize; } PrintDialog::PrintDialog(weld::Window* i_pWindow, const std::shared_ptr& i_rController) : GenericDialogController(i_pWindow, "vcl/ui/printdialog.ui", "PrintDialog") , maPController( i_rController ) , mxTabCtrl(m_xBuilder->weld_notebook("tabcontrol")) , mxScrolledWindow(m_xBuilder->weld_scrolled_window("scrolledwindow")) , mxPageLayoutFrame(m_xBuilder->weld_frame("layoutframe")) , mxPrinters(m_xBuilder->weld_combo_box("printersbox")) , mxStatusTxt(m_xBuilder->weld_label("status")) , mxSetupButton(m_xBuilder->weld_button("setup")) , mxCopyCountField(m_xBuilder->weld_spin_button("copycount")) , mxCollateBox(m_xBuilder->weld_check_button("collate")) , mxCollateImage(m_xBuilder->weld_image("collateimage")) , mxPageRangeEdit(m_xBuilder->weld_entry("pagerange")) , mxPageRangesRadioButton(m_xBuilder->weld_radio_button("rbRangePages")) , mxPaperSidesBox(m_xBuilder->weld_combo_box("sidesbox")) , mxReverseOrderBox(m_xBuilder->weld_check_button("reverseorder")) , mxOKButton(m_xBuilder->weld_button("ok")) , mxCancelButton(m_xBuilder->weld_button("cancel")) , mxHelpButton(m_xBuilder->weld_button("help")) , mxMoreOptionsBtn(m_xBuilder->weld_button("moreoptionsbtn")) , mxBackwardBtn(m_xBuilder->weld_button("backward")) , mxForwardBtn(m_xBuilder->weld_button("forward")) , mxFirstBtn(m_xBuilder->weld_button("btnFirst")) , mxLastBtn(m_xBuilder->weld_button("btnLast")) , mxPreviewBox(m_xBuilder->weld_check_button("previewbox")) , mxNumPagesText(m_xBuilder->weld_label("totalnumpages")) , mxPreview(new PrintPreviewWindow(this)) , mxPreviewWindow(new weld::CustomWeld(*m_xBuilder, "preview", *mxPreview)) , mxPageEdit(m_xBuilder->weld_entry("pageedit")) , mxPagesBtn(m_xBuilder->weld_radio_button("pagespersheetbtn")) , mxBrochureBtn(m_xBuilder->weld_radio_button("brochure")) , mxPagesBoxTitleTxt(m_xBuilder->weld_label("pagespersheettxt")) , mxNupPagesBox(m_xBuilder->weld_combo_box("pagespersheetbox")) , mxNupNumPagesTxt(m_xBuilder->weld_label("pagestxt")) , mxNupColEdt(m_xBuilder->weld_spin_button("pagecols")) , mxNupTimesTxt(m_xBuilder->weld_label("by")) , mxNupRowsEdt(m_xBuilder->weld_spin_button("pagerows")) , mxPageMarginTxt1(m_xBuilder->weld_label("pagemargintxt1")) , mxPageMarginEdt(m_xBuilder->weld_metric_spin_button("pagemarginsb", FieldUnit::MM)) , mxPageMarginTxt2(m_xBuilder->weld_label("pagemargintxt2")) , mxSheetMarginTxt1(m_xBuilder->weld_label("sheetmargintxt1")) , mxSheetMarginEdt(m_xBuilder->weld_metric_spin_button("sheetmarginsb", FieldUnit::MM)) , mxSheetMarginTxt2(m_xBuilder->weld_label("sheetmargintxt2")) , mxPaperSizeBox(m_xBuilder->weld_combo_box("papersizebox")) , mxOrientationBox(m_xBuilder->weld_combo_box("pageorientationbox")) , mxNupOrderTxt(m_xBuilder->weld_label("labelorder")) , mxNupOrderBox(m_xBuilder->weld_combo_box("orderbox")) , mxNupOrder(new ShowNupOrderWindow) , mxNupOrderWin(new weld::CustomWeld(*m_xBuilder, "orderpreview", *mxNupOrder)) , mxBorderCB(m_xBuilder->weld_check_button("bordercb")) , mxRangeExpander(m_xBuilder->weld_expander("exRangeExpander")) , mxLayoutExpander(m_xBuilder->weld_expander("exLayoutExpander")) , mxCustom(m_xBuilder->weld_widget("customcontents")) , maPrintToFileText( VclResId( SV_PRINT_TOFILE_TXT ) ) , maDefPrtText( VclResId( SV_PRINT_DEFPRT_TXT ) ) , maNoPageStr( VclResId( SV_PRINT_NOPAGES ) ) , maNoPreviewStr( VclResId( SV_PRINT_NOPREVIEW ) ) , mnCurPage( 0 ) , mnCachedPages( 0 ) , mbCollateAlwaysOff(false) , mbShowLayoutFrame( true ) , mbSingleJobs( false ) { // save printbutton text, gets exchanged occasionally with print to file maPrintText = mxOKButton->get_label(); maPageStr = mxNumPagesText->get_label(); Printer::updatePrinters(); mxPrinters->append_text(maPrintToFileText); // fill printer listbox std::vector< OUString > rQueues( Printer::GetPrinterQueues() ); std::sort( rQueues.begin(), rQueues.end(), lcl_ListBoxCompare ); for( const auto& rQueue : rQueues ) { mxPrinters->append_text(rQueue); } // select current printer if (mxPrinters->find_text(maPController->getPrinter()->GetName()) != -1) mxPrinters->set_active_text(maPController->getPrinter()->GetName()); else { // fall back to last printer SettingsConfigItem* pItem = SettingsConfigItem::get(); OUString aValue( pItem->getValue( "PrintDialog", "LastPrinter" ) ); if (mxPrinters->find_text(aValue) != -1) { mxPrinters->set_active_text(aValue); maPController->setPrinter( VclPtrInstance( aValue ) ); } else { // fall back to default printer mxPrinters->set_active_text(Printer::GetDefaultPrinterName()); maPController->setPrinter( VclPtrInstance( Printer::GetDefaultPrinterName() ) ); } } // not printing to file maPController->resetPrinterOptions( false ); // update the text fields for the printer updatePrinterText(); // set paper sizes listbox setPaperSizes(); // setup dependencies checkControlDependencies(); // setup paper sides box setupPaperSidesBox(); // set initial focus to "Number of copies" mxCopyCountField->grab_focus(); mxCopyCountField->select_region(0, -1); // setup sizes for N-Up Size aNupSize( maPController->getPrinter()->PixelToLogic( maPController->getPrinter()->GetPaperSizePixel(), MapMode( MapUnit::Map100thMM ) ) ); if( maPController->getPrinter()->GetOrientation() == Orientation::Landscape ) { maNupLandscapeSize = aNupSize; // coverity[swapped_arguments : FALSE] - this is in the correct order maNupPortraitSize = Size( aNupSize.Height(), aNupSize.Width() ); } else { maNupPortraitSize = aNupSize; // coverity[swapped_arguments : FALSE] - this is in the correct order maNupLandscapeSize = Size( aNupSize.Height(), aNupSize.Width() ); } initFromMultiPageSetup( maPController->getMultipage() ); // setup optional UI options set by application setupOptionalUI(); // hide layout frame if unwanted mxPageLayoutFrame->set_visible(mbShowLayoutFrame); // restore settings from last run readFromSettings(); // setup click hdl mxOKButton->connect_clicked(LINK(this, PrintDialog, ClickHdl)); mxCancelButton->connect_clicked(LINK(this, PrintDialog, ClickHdl)); mxHelpButton->connect_clicked(LINK(this, PrintDialog, ClickHdl)); mxSetupButton->connect_clicked( LINK( this, PrintDialog, ClickHdl ) ); mxMoreOptionsBtn->connect_clicked( LINK( this, PrintDialog, ClickHdl ) ); mxBackwardBtn->connect_clicked(LINK(this, PrintDialog, ClickHdl)); mxForwardBtn->connect_clicked(LINK(this, PrintDialog, ClickHdl)); mxFirstBtn->connect_clicked(LINK(this, PrintDialog, ClickHdl)); mxLastBtn->connect_clicked( LINK( this, PrintDialog, ClickHdl ) ); mxPreviewBox->connect_clicked( LINK( this, PrintDialog, ClickHdl ) ); mxBorderCB->connect_clicked( LINK( this, PrintDialog, ClickHdl ) ); // setup toggle hdl mxReverseOrderBox->connect_toggled( LINK( this, PrintDialog, ToggleHdl ) ); mxCollateBox->connect_toggled( LINK( this, PrintDialog, ToggleHdl ) ); mxPagesBtn->connect_toggled( LINK( this, PrintDialog, ToggleHdl ) ); // setup select hdl mxPrinters->connect_changed( LINK( this, PrintDialog, SelectHdl ) ); mxPaperSidesBox->connect_changed( LINK( this, PrintDialog, SelectHdl ) ); mxNupPagesBox->connect_changed( LINK( this, PrintDialog, SelectHdl ) ); mxOrientationBox->connect_changed( LINK( this, PrintDialog, SelectHdl ) ); mxNupOrderBox->connect_changed( LINK( this, PrintDialog, SelectHdl ) ); mxPaperSizeBox->connect_changed( LINK( this, PrintDialog, SelectHdl ) ); // setup modify hdl mxPageEdit->connect_activate( LINK( this, PrintDialog, ActivateHdl ) ); mxPageEdit->connect_focus_out( LINK( this, PrintDialog, FocusOutHdl ) ); mxCopyCountField->connect_value_changed( LINK( this, PrintDialog, SpinModifyHdl ) ); mxNupColEdt->connect_value_changed( LINK( this, PrintDialog, SpinModifyHdl ) ); mxNupRowsEdt->connect_value_changed( LINK( this, PrintDialog, SpinModifyHdl ) ); mxPageMarginEdt->connect_value_changed( LINK( this, PrintDialog, MetricSpinModifyHdl ) ); mxSheetMarginEdt->connect_value_changed( LINK( this, PrintDialog, MetricSpinModifyHdl ) ); mxRangeExpander->connect_expanded(LINK( this, PrintDialog, ExpandHdl)); mxLayoutExpander->connect_expanded(LINK( this, PrintDialog, ExpandHdl)); updateNupFromPages(); // lock the dialog height, regardless of later expander state mxScrolledWindow->set_size_request( mxScrolledWindow->get_preferred_size().Width() + mxScrolledWindow->get_vscroll_width(), mxScrolledWindow->get_preferred_size().Height()); } IMPL_LINK_NOARG(PrintDialog, ExpandHdl, weld::Expander&, void) { m_xDialog->resize_to_request(); } PrintDialog::~PrintDialog() { } void PrintDialog::setupPaperSidesBox() { DuplexMode eDuplex = maPController->getPrinter()->GetDuplexMode(); if ( eDuplex == DuplexMode::Unknown || isPrintToFile() ) { mxPaperSidesBox->set_active( 0 ); mxPaperSidesBox->set_sensitive( false ); } else { mxPaperSidesBox->set_active( static_cast(eDuplex) - 1 ); mxPaperSidesBox->set_sensitive( true ); } } void PrintDialog::storeToSettings() { SettingsConfigItem* pItem = SettingsConfigItem::get(); pItem->setValue( "PrintDialog", "LastPrinter", isPrintToFile() ? Printer::GetDefaultPrinterName() : mxPrinters->get_active_text() ); pItem->setValue( "PrintDialog", "LastPage", mxTabCtrl->get_tab_label_text(mxTabCtrl->get_current_page_ident())); pItem->setValue( "PrintDialog", "WindowState", OStringToOUString(m_xDialog->get_window_state(WindowStateMask::All), RTL_TEXTENCODING_UTF8) ); pItem->setValue( "PrintDialog", "CopyCount", mxCopyCountField->get_text() ); pItem->setValue( "PrintDialog", "Collate", mxCollateBox->get_active() ? OUString("true") : OUString("false") ); pItem->setValue( "PrintDialog", "CollateSingleJobs", mbSingleJobs ? OUString("true") : OUString("false") ); pItem->setValue( "PrintDialog", "HasPreview", hasPreview() ? OUString("true") : OUString("false") ); pItem->Commit(); } void PrintDialog::readFromSettings() { SettingsConfigItem* pItem = SettingsConfigItem::get(); // read last selected tab page; if it exists, activate it OUString aValue = pItem->getValue( "PrintDialog", "LastPage" ); sal_uInt16 nCount = mxTabCtrl->get_n_pages(); for (sal_uInt16 i = 0; i < nCount; ++i) { OString sPageId = mxTabCtrl->get_page_ident(i); if (aValue == mxTabCtrl->get_tab_label_text(sPageId)) { mxTabCtrl->set_current_page(sPageId); break; } } // persistent window state aValue = pItem->getValue( "PrintDialog", "WindowState" ); if (!aValue.isEmpty()) m_xDialog->set_window_state(OUStringToOString(aValue, RTL_TEXTENCODING_UTF8)); // collate aValue = pItem->getValue( "PrintDialog", "CollateBox" ); if( aValue.equalsIgnoreAsciiCase("alwaysoff") ) { mbCollateAlwaysOff = true; mxCollateBox->set_active( false ); mxCollateBox->set_sensitive( false ); } else { mbCollateAlwaysOff = false; aValue = pItem->getValue( "PrintDialog", "Collate" ); mxCollateBox->set_active( aValue.equalsIgnoreAsciiCase("true") ); } // collate single jobs aValue = pItem->getValue( "PrintDialog", "CollateSingleJobs" ); if ( aValue.equalsIgnoreAsciiCase("true") ) mbSingleJobs = true; else mbSingleJobs = false; // preview box aValue = pItem->getValue( "PrintDialog", "HasPreview" ); if ( aValue.equalsIgnoreAsciiCase("false") ) mxPreviewBox->set_active( false ); else mxPreviewBox->set_active( true ); } void PrintDialog::setPaperSizes() { mxPaperSizeBox->clear(); VclPtr aPrt( maPController->getPrinter() ); mePaper = aPrt->GetPaper(); if ( isPrintToFile() ) { mxPaperSizeBox->set_sensitive( false ); } else { for (int nPaper = 0; nPaper < aPrt->GetPaperInfoCount(); nPaper++) { PaperInfo aInfo = aPrt->GetPaperInfo( nPaper ); aInfo.doSloppyFit(); Paper ePaper = aInfo.getPaper(); const LocaleDataWrapper& rLocWrap(Application::GetSettings().GetLocaleDataWrapper()); MapUnit eUnit = MapUnit::MapMM; int nDigits = 0; if( rLocWrap.getMeasurementSystemEnum() == MeasurementSystem::US ) { eUnit = MapUnit::Map100thInch; nDigits = 2; } Size aSize = aPrt->GetPaperSize( nPaper ); Size aLogicPaperSize( OutputDevice::LogicToLogic( aSize, MapMode( MapUnit::Map100thMM ), MapMode( eUnit ) ) ); OUString aWidth( rLocWrap.getNum( aLogicPaperSize.Width(), nDigits ) ); OUString aHeight( rLocWrap.getNum( aLogicPaperSize.Height(), nDigits ) ); OUString aUnit = eUnit == MapUnit::MapMM ? OUString("mm") : OUString("in"); OUString aPaperName = Printer::GetPaperName( ePaper ) + " " + aWidth + aUnit + " x " + aHeight + aUnit; mxPaperSizeBox->append_text(aPaperName); if ( ePaper == mePaper ) mxPaperSizeBox->set_active( nPaper ); } mxPaperSizeBox->set_sensitive( true ); } } void PrintDialog::updatePrinterText() { const OUString aDefPrt( Printer::GetDefaultPrinterName() ); const QueueInfo* pInfo = Printer::GetQueueInfo( mxPrinters->get_active_text(), true ); if( pInfo ) { // FIXME: status text OUString aStatus; if( aDefPrt == pInfo->GetPrinterName() ) aStatus = maDefPrtText; mxStatusTxt->set_label( aStatus ); } else { mxStatusTxt->set_label( OUString() ); } } void PrintDialog::setPreviewText() { OUString aNewText( maPageStr.replaceFirst( "%n", OUString::number( mnCachedPages ) ) ); mxNumPagesText->set_label( aNewText ); } void PrintDialog::preparePreview( bool i_bMayUseCache ) { VclPtr aPrt( maPController->getPrinter() ); Size aCurPageSize = aPrt->PixelToLogic( aPrt->GetPaperSizePixel(), MapMode( MapUnit::Map100thMM ) ); // tdf#123076 Get paper size for the preview top label mePaper = aPrt->GetPaper(); GDIMetaFile aMtf; // page range may have changed depending on options sal_Int32 nPages = maPController->getFilteredPageCount(); mnCachedPages = nPages; setPreviewText(); if ( !hasPreview() ) { mxPreview->setPreview( aMtf, aCurPageSize, Printer::GetPaperName( mePaper ), maNoPreviewStr, aPrt->GetDPIX(), aPrt->GetDPIY(), aPrt->GetPrinterOptions().IsConvertToGreyscales() ); mxForwardBtn->set_sensitive( false ); mxBackwardBtn->set_sensitive( false ); mxFirstBtn->set_sensitive( false ); mxLastBtn->set_sensitive( false ); mxPageEdit->set_sensitive( false ); return; } if( mnCurPage >= nPages ) mnCurPage = nPages-1; if( mnCurPage < 0 ) mnCurPage = 0; mxPageEdit->set_text(OUString::number(mnCurPage + 1)); const MapMode aMapMode( MapUnit::Map100thMM ); if( nPages > 0 ) { PrinterController::PageSize aPageSize = maPController->getFilteredPageFile( mnCurPage, aMtf, i_bMayUseCache ); if( ! aPageSize.bFullPaper ) { Point aOff( aPrt->PixelToLogic( aPrt->GetPageOffsetPixel(), aMapMode ) ); aMtf.Move( aOff.X(), aOff.Y() ); } } mxPreview->setPreview( aMtf, aCurPageSize, Printer::GetPaperName( mePaper ), nPages > 0 ? OUString() : maNoPageStr, aPrt->GetDPIX(), aPrt->GetDPIY(), aPrt->GetPrinterOptions().IsConvertToGreyscales() ); mxForwardBtn->set_sensitive( mnCurPage < nPages-1 ); mxBackwardBtn->set_sensitive( mnCurPage != 0 ); mxFirstBtn->set_sensitive( mnCurPage != 0 ); mxLastBtn->set_sensitive( mnCurPage < nPages-1 ); mxPageEdit->set_sensitive( nPages > 1 ); } void PrintDialog::updateOrientationBox( const bool bAutomatic ) { if ( !bAutomatic ) { Orientation eOrientation = maPController->getPrinter()->GetOrientation(); mxOrientationBox->set_active( static_cast(eOrientation) + 1 ); } else if ( hasOrientationChanged() ) { mxOrientationBox->set_active( ORIENTATION_AUTOMATIC ); } } bool PrintDialog::hasOrientationChanged() const { const int nOrientation = mxOrientationBox->get_active(); const Orientation eOrientation = maPController->getPrinter()->GetOrientation(); return (nOrientation == ORIENTATION_LANDSCAPE && eOrientation == Orientation::Portrait) || (nOrientation == ORIENTATION_PORTRAIT && eOrientation == Orientation::Landscape); } // make sure paper size matches paper orientation void PrintDialog::checkPaperSize( Size& rPaperSize ) { Orientation eOrientation = maPController->getPrinter()->GetOrientation(); if ( (eOrientation == Orientation::Portrait && rPaperSize.Width() > rPaperSize.Height()) || (eOrientation == Orientation::Landscape && rPaperSize.Width() < rPaperSize.Height()) ) { // coverity[swapped-arguments : FALSE] - this is in the correct order rPaperSize = Size( rPaperSize.Height(), rPaperSize.Width() ); } } // Always use this function to set paper orientation to make sure everything behaves well void PrintDialog::setPaperOrientation( Orientation eOrientation ) { VclPtr aPrt( maPController->getPrinter() ); aPrt->SetOrientation( eOrientation ); // check if it's necessary to swap width and height of paper if ( maPController->isPaperSizeFromUser() ) { Size& aPaperSize = maPController->getPaperSizeFromUser(); checkPaperSize( aPaperSize ); } else if ( maPController->getPapersizeFromSetup() ) { Size& aPaperSize = maPController->getPaperSizeSetup(); checkPaperSize( aPaperSize ); } } void PrintDialog::checkControlDependencies() { if (mxCopyCountField->get_value() > 1) mxCollateBox->set_sensitive( !mbCollateAlwaysOff ); else mxCollateBox->set_sensitive( false ); OUString aImg(mxCollateBox->get_active() ? OUString(SV_PRINT_COLLATE_BMP) : OUString(SV_PRINT_NOCOLLATE_BMP)); mxCollateImage->set_from_icon_name(aImg); // enable setup button only for printers that can be setup bool bHaveSetup = maPController->getPrinter()->HasSupport( PrinterSupport::SetupDialog ); mxSetupButton->set_sensitive(bHaveSetup); } void PrintDialog::checkOptionalControlDependencies() { for( const auto& rEntry : maControlToPropertyMap ) { bool bShouldbeEnabled = maPController->isUIOptionEnabled( rEntry.second ); if (bShouldbeEnabled && dynamic_cast(rEntry.first)) { auto r_it = maControlToNumValMap.find( rEntry.first ); if( r_it != maControlToNumValMap.end() ) { bShouldbeEnabled = maPController->isUIChoiceEnabled( rEntry.second, r_it->second ); } } bool bIsEnabled = rEntry.first->get_sensitive(); // Enable does not do a change check first, so can be less cheap than expected if (bShouldbeEnabled != bIsEnabled) rEntry.first->set_sensitive( bShouldbeEnabled ); } } void PrintDialog::initFromMultiPageSetup( const vcl::PrinterController::MultiPageSetup& i_rMPS ) { mxNupOrderWin->show(); mxPagesBtn->set_active(true); mxBrochureBtn->hide(); // setup field units for metric fields const LocaleDataWrapper& rLocWrap(Application::GetSettings().GetLocaleDataWrapper()); FieldUnit eUnit = FieldUnit::MM; sal_uInt16 nDigits = 0; if( rLocWrap.getMeasurementSystemEnum() == MeasurementSystem::US ) { eUnit = FieldUnit::INCH; nDigits = 2; } // set units mxPageMarginEdt->set_unit( eUnit ); mxSheetMarginEdt->set_unit( eUnit ); // set precision mxPageMarginEdt->set_digits( nDigits ); mxSheetMarginEdt->set_digits( nDigits ); mxSheetMarginEdt->set_value( mxSheetMarginEdt->normalize( i_rMPS.nLeftMargin ), FieldUnit::MM_100TH ); mxPageMarginEdt->set_value( mxPageMarginEdt->normalize( i_rMPS.nHorizontalSpacing ), FieldUnit::MM_100TH ); mxBorderCB->set_active( i_rMPS.bDrawBorder ); mxNupRowsEdt->set_value( i_rMPS.nRows ); mxNupColEdt->set_value( i_rMPS.nColumns ); mxNupOrderBox->set_active( static_cast(i_rMPS.nOrder) ); if( i_rMPS.nRows != 1 || i_rMPS.nColumns != 1 ) { mxNupPagesBox->set_active( mxNupPagesBox->get_count()-1 ); showAdvancedControls( true ); mxNupOrder->setValues( i_rMPS.nOrder, i_rMPS.nColumns, i_rMPS.nRows ); } } void PrintDialog::updateNup( bool i_bMayUseCache ) { int nRows = mxNupRowsEdt->get_value(); int nCols = mxNupColEdt->get_value(); long nPageMargin = mxPageMarginEdt->denormalize(mxPageMarginEdt->get_value( FieldUnit::MM_100TH )); long nSheetMargin = mxSheetMarginEdt->denormalize(mxSheetMarginEdt->get_value( FieldUnit::MM_100TH )); PrinterController::MultiPageSetup aMPS; aMPS.nRows = nRows; aMPS.nColumns = nCols; aMPS.nLeftMargin = aMPS.nTopMargin = aMPS.nRightMargin = aMPS.nBottomMargin = nSheetMargin; aMPS.nHorizontalSpacing = aMPS.nVerticalSpacing = nPageMargin; aMPS.bDrawBorder = mxBorderCB->get_active(); aMPS.nOrder = static_cast(mxNupOrderBox->get_active()); int nOrientationMode = mxOrientationBox->get_active(); if( nOrientationMode == ORIENTATION_LANDSCAPE ) aMPS.aPaperSize = maNupLandscapeSize; else if( nOrientationMode == ORIENTATION_PORTRAIT ) aMPS.aPaperSize = maNupPortraitSize; else // automatic mode { // get size of first real page to see if it is portrait or landscape // we assume same page sizes for all the pages for this Size aPageSize = getJobPageSize(); Size aMultiSize( aPageSize.Width() * nCols, aPageSize.Height() * nRows ); if( aMultiSize.Width() > aMultiSize.Height() ) // fits better on landscape { aMPS.aPaperSize = maNupLandscapeSize; setPaperOrientation( Orientation::Landscape ); } else { aMPS.aPaperSize = maNupPortraitSize; setPaperOrientation( Orientation::Portrait ); } } maPController->setMultipage( aMPS ); mxNupOrder->setValues( aMPS.nOrder, nCols, nRows ); preparePreview( i_bMayUseCache ); } void PrintDialog::updateNupFromPages( bool i_bMayUseCache ) { int nPages = mxNupPagesBox->get_active_id().toInt32(); int nRows = mxNupRowsEdt->get_value(); int nCols = mxNupColEdt->get_value(); long nPageMargin = mxPageMarginEdt->denormalize(mxPageMarginEdt->get_value( FieldUnit::MM_100TH )); long nSheetMargin = mxSheetMarginEdt->denormalize(mxSheetMarginEdt->get_value( FieldUnit::MM_100TH )); bool bCustom = false; if( nPages == 1 ) { nRows = nCols = 1; nSheetMargin = 0; nPageMargin = 0; } else if( nPages == 2 || nPages == 4 || nPages == 6 || nPages == 9 || nPages == 16 ) { Size aJobPageSize( getJobPageSize() ); bool bPortrait = aJobPageSize.Width() < aJobPageSize.Height(); if( nPages == 2 ) { if( bPortrait ) { nRows = 1; nCols = 2; } else { nRows = 2; nCols = 1; } } else if( nPages == 4 ) nRows = nCols = 2; else if( nPages == 6 ) { if( bPortrait ) { nRows = 2; nCols = 3; } else { nRows = 3; nCols = 2; } } else if( nPages == 9 ) nRows = nCols = 3; else if( nPages == 16 ) nRows = nCols = 4; nPageMargin = 0; nSheetMargin = 0; } else bCustom = true; if( nPages > 1 ) { // set upper limits for margins based on job page size and rows/columns Size aSize( getJobPageSize() ); // maximum sheet distance: 1/2 sheet long nHorzMax = aSize.Width()/2; long nVertMax = aSize.Height()/2; if( nSheetMargin > nHorzMax ) nSheetMargin = nHorzMax; if( nSheetMargin > nVertMax ) nSheetMargin = nVertMax; mxSheetMarginEdt->set_max( mxSheetMarginEdt->normalize( std::min(nHorzMax, nVertMax) ), FieldUnit::MM_100TH ); // maximum page distance nHorzMax = (aSize.Width() - 2*nSheetMargin); if( nCols > 1 ) nHorzMax /= (nCols-1); nVertMax = (aSize.Height() - 2*nSheetMargin); if( nRows > 1 ) nHorzMax /= (nRows-1); if( nPageMargin > nHorzMax ) nPageMargin = nHorzMax; if( nPageMargin > nVertMax ) nPageMargin = nVertMax; mxPageMarginEdt->set_max( mxSheetMarginEdt->normalize( std::min(nHorzMax, nVertMax ) ), FieldUnit::MM_100TH ); } mxNupRowsEdt->set_value( nRows ); mxNupColEdt->set_value( nCols ); mxPageMarginEdt->set_value( mxPageMarginEdt->normalize( nPageMargin ), FieldUnit::MM_100TH ); mxSheetMarginEdt->set_value( mxSheetMarginEdt->normalize( nSheetMargin ), FieldUnit::MM_100TH ); showAdvancedControls( bCustom ); updateNup( i_bMayUseCache ); } void PrintDialog::enableNupControls( bool bEnable ) { mxNupPagesBox->set_sensitive( bEnable ); mxNupNumPagesTxt->set_sensitive( bEnable ); mxNupColEdt->set_sensitive( bEnable ); mxNupTimesTxt->set_sensitive( bEnable ); mxNupRowsEdt->set_sensitive( bEnable ); mxPageMarginTxt1->set_sensitive( bEnable ); mxPageMarginEdt->set_sensitive( bEnable ); mxPageMarginTxt2->set_sensitive( bEnable ); mxSheetMarginTxt1->set_sensitive( bEnable ); mxSheetMarginEdt->set_sensitive( bEnable ); mxSheetMarginTxt2->set_sensitive( bEnable ); mxNupOrderTxt->set_sensitive( bEnable ); mxNupOrderBox->set_sensitive( bEnable ); mxNupOrderWin->set_sensitive( bEnable ); mxBorderCB->set_sensitive( bEnable ); } void PrintDialog::showAdvancedControls( bool i_bShow ) { mxNupNumPagesTxt->set_visible( i_bShow ); mxNupColEdt->set_visible( i_bShow ); mxNupTimesTxt->set_visible( i_bShow ); mxNupRowsEdt->set_visible( i_bShow ); mxPageMarginTxt1->set_visible( i_bShow ); mxPageMarginEdt->set_visible( i_bShow ); mxPageMarginTxt2->set_visible( i_bShow ); mxSheetMarginTxt1->set_visible( i_bShow ); mxSheetMarginEdt->set_visible( i_bShow ); mxSheetMarginTxt2->set_visible( i_bShow ); } namespace { void setHelpId( weld::Widget* i_pWindow, const Sequence< OUString >& i_rHelpIds, sal_Int32 i_nIndex ) { if( i_nIndex >= 0 && i_nIndex < i_rHelpIds.getLength() ) i_pWindow->set_help_id( OUStringToOString( i_rHelpIds.getConstArray()[i_nIndex], RTL_TEXTENCODING_UTF8 ) ); } void setHelpText( weld::Widget* i_pWindow, const Sequence< OUString >& i_rHelpTexts, sal_Int32 i_nIndex ) { // without a help text set and the correct smartID, // help texts will be retrieved from the online help system if( i_nIndex >= 0 && i_nIndex < i_rHelpTexts.getLength() ) i_pWindow->set_tooltip_text(i_rHelpTexts.getConstArray()[i_nIndex]); } } void PrintDialog::setupOptionalUI() { const Sequence< PropertyValue >& rOptions( maPController->getUIOptions() ); for( const auto& rOption : rOptions ) { if (rOption.Name == "OptionsUIFile") { OUString sOptionsUIFile; rOption.Value >>= sOptionsUIFile; mxCustomOptionsUIBuilder.reset(Application::CreateBuilder(mxCustom.get(), sOptionsUIFile)); std::unique_ptr xWindow = mxCustomOptionsUIBuilder->weld_container("box"); xWindow->show(); continue; } Sequence< beans::PropertyValue > aOptProp; rOption.Value >>= aOptProp; // extract ui element OUString aCtrlType; OString aID; OUString aText; OUString aPropertyName; Sequence< OUString > aChoices; Sequence< sal_Bool > aChoicesDisabled; Sequence< OUString > aHelpTexts; Sequence< OUString > aIDs; Sequence< OUString > aHelpIds; sal_Int64 nMinValue = 0, nMaxValue = 0; OUString aGroupingHint; for( const beans::PropertyValue& rEntry : std::as_const(aOptProp) ) { if ( rEntry.Name == "ID" ) { rEntry.Value >>= aIDs; aID = OUStringToOString(aIDs[0], RTL_TEXTENCODING_UTF8); } if ( rEntry.Name == "Text" ) { rEntry.Value >>= aText; } else if ( rEntry.Name == "ControlType" ) { rEntry.Value >>= aCtrlType; } else if ( rEntry.Name == "Choices" ) { rEntry.Value >>= aChoices; } else if ( rEntry.Name == "ChoicesDisabled" ) { rEntry.Value >>= aChoicesDisabled; } else if ( rEntry.Name == "Property" ) { PropertyValue aVal; rEntry.Value >>= aVal; aPropertyName = aVal.Name; } else if ( rEntry.Name == "Enabled" ) { } else if ( rEntry.Name == "GroupingHint" ) { rEntry.Value >>= aGroupingHint; } else if ( rEntry.Name == "DependsOnName" ) { } else if ( rEntry.Name == "DependsOnEntry" ) { } else if ( rEntry.Name == "AttachToDependency" ) { } else if ( rEntry.Name == "MinValue" ) { rEntry.Value >>= nMinValue; } else if ( rEntry.Name == "MaxValue" ) { rEntry.Value >>= nMaxValue; } else if ( rEntry.Name == "HelpText" ) { if( ! (rEntry.Value >>= aHelpTexts) ) { OUString aHelpText; if( rEntry.Value >>= aHelpText ) { aHelpTexts.realloc( 1 ); *aHelpTexts.getArray() = aHelpText; } } } else if ( rEntry.Name == "HelpId" ) { if( ! (rEntry.Value >>= aHelpIds ) ) { OUString aHelpId; if( rEntry.Value >>= aHelpId ) { aHelpIds.realloc( 1 ); *aHelpIds.getArray() = aHelpId; } } } else if ( rEntry.Name == "HintNoLayoutPage" ) { bool bHasLayoutFrame = false; rEntry.Value >>= bHasLayoutFrame; mbShowLayoutFrame = !bHasLayoutFrame; } } if (aCtrlType == "Group") { aID = "custom"; weld::Container* pPage = mxTabCtrl->get_page(aID); if (!pPage) continue; mxTabCtrl->set_tab_label_text(aID, aText); // set help id if (aHelpIds.hasElements()) pPage->set_help_id(OUStringToOString(aHelpIds.getConstArray()[0], RTL_TEXTENCODING_UTF8)); // set help text if (aHelpTexts.hasElements()) pPage->set_tooltip_text(aHelpTexts.getConstArray()[0]); pPage->show(); } else if (aCtrlType == "Subgroup" && !aID.isEmpty()) { std::unique_ptr xWidget; // since 'New Print Dialog Design' fromwhich in calc is not a frame anymore if (aID == "fromwhich") { std::unique_ptr xLabel = m_xBuilder->weld_label(aID); xLabel->set_label(aText); xWidget = std::move(xLabel); } else { std::unique_ptr xFrame = m_xBuilder->weld_frame(aID); if (!xFrame && mxCustomOptionsUIBuilder) xFrame = mxCustomOptionsUIBuilder->weld_frame(aID); if (xFrame) { xFrame->set_label(aText); xWidget = std::move(xFrame); } } if (!xWidget) continue; // set help id setHelpId(xWidget.get(), aHelpIds, 0); // set help text setHelpText(xWidget.get(), aHelpTexts, 0); xWidget->show(); } // EVIL else if( aCtrlType == "Bool" && aGroupingHint == "LayoutPage" && aPropertyName == "PrintProspect" ) { mxBrochureBtn->set_label(aText); mxBrochureBtn->show(); bool bVal = false; PropertyValue* pVal = maPController->getValue( aPropertyName ); if( pVal ) pVal->Value >>= bVal; mxBrochureBtn->set_active( bVal ); mxBrochureBtn->set_sensitive( maPController->isUIOptionEnabled( aPropertyName ) && pVal != nullptr ); mxBrochureBtn->connect_toggled( LINK( this, PrintDialog, ToggleHdl ) ); maPropertyToWindowMap[aPropertyName].emplace_back(mxBrochureBtn.get()); maControlToPropertyMap[mxBrochureBtn.get()] = aPropertyName; // set help id setHelpId( mxBrochureBtn.get(), aHelpIds, 0 ); // set help text setHelpText( mxBrochureBtn.get(), aHelpTexts, 0 ); } else if (aCtrlType == "Bool") { // add a check box std::unique_ptr xNewBox = m_xBuilder->weld_check_button(aID); if (!xNewBox && mxCustomOptionsUIBuilder) xNewBox = mxCustomOptionsUIBuilder->weld_check_button(aID); if (!xNewBox) continue; xNewBox->set_label( aText ); xNewBox->show(); bool bVal = false; PropertyValue* pVal = maPController->getValue( aPropertyName ); if( pVal ) pVal->Value >>= bVal; xNewBox->set_active( bVal ); xNewBox->connect_toggled( LINK( this, PrintDialog, UIOption_CheckHdl ) ); maExtraControls.emplace_back(std::move(xNewBox)); weld::Widget* pWidget = maExtraControls.back().get(); maPropertyToWindowMap[aPropertyName].emplace_back(pWidget); maControlToPropertyMap[pWidget] = aPropertyName; // set help id setHelpId(pWidget, aHelpIds, 0); // set help text setHelpText(pWidget, aHelpTexts, 0); } else if (aCtrlType == "Radio") { sal_Int32 nCurHelpText = 0; // iterate options sal_Int32 nSelectVal = 0; PropertyValue* pVal = maPController->getValue( aPropertyName ); if( pVal && pVal->Value.hasValue() ) pVal->Value >>= nSelectVal; for( sal_Int32 m = 0; m < aChoices.getLength(); m++ ) { aID = OUStringToOString(aIDs[m], RTL_TEXTENCODING_UTF8); std::unique_ptr xBtn = m_xBuilder->weld_radio_button(aID); if (!xBtn && mxCustomOptionsUIBuilder) xBtn = mxCustomOptionsUIBuilder->weld_radio_button(aID); if (!xBtn) continue; xBtn->set_label( aChoices[m] ); xBtn->set_active( m == nSelectVal ); xBtn->connect_toggled( LINK( this, PrintDialog, UIOption_RadioHdl ) ); if( aChoicesDisabled.getLength() > m && aChoicesDisabled[m] ) xBtn->set_sensitive( false ); xBtn->show(); maExtraControls.emplace_back(std::move(xBtn)); weld::Widget* pWidget = maExtraControls.back().get(); maPropertyToWindowMap[ aPropertyName ].emplace_back(pWidget); maControlToPropertyMap[pWidget] = aPropertyName; maControlToNumValMap[pWidget] = m; // set help id setHelpId( pWidget, aHelpIds, nCurHelpText ); // set help text setHelpText( pWidget, aHelpTexts, nCurHelpText ); nCurHelpText++; } } else if ( aCtrlType == "List" ) { std::unique_ptr xList = m_xBuilder->weld_combo_box(aID); if (!xList && mxCustomOptionsUIBuilder) xList = mxCustomOptionsUIBuilder->weld_combo_box(aID); if (!xList) continue; // iterate options for( const auto& rChoice : std::as_const(aChoices) ) xList->append_text(rChoice); sal_Int32 nSelectVal = 0; PropertyValue* pVal = maPController->getValue( aPropertyName ); if( pVal && pVal->Value.hasValue() ) pVal->Value >>= nSelectVal; xList->set_active(nSelectVal); xList->connect_changed( LINK( this, PrintDialog, UIOption_SelectHdl ) ); xList->show(); maExtraControls.emplace_back(std::move(xList)); weld::Widget* pWidget = maExtraControls.back().get(); maPropertyToWindowMap[ aPropertyName ].emplace_back(pWidget); maControlToPropertyMap[pWidget] = aPropertyName; // set help id setHelpId( pWidget, aHelpIds, 0 ); // set help text setHelpText( pWidget, aHelpTexts, 0 ); } else if ( aCtrlType == "Range" ) { std::unique_ptr xField = m_xBuilder->weld_spin_button(aID); if (!xField && mxCustomOptionsUIBuilder) xField = mxCustomOptionsUIBuilder->weld_spin_button(aID); if (!xField) continue; // set min/max and current value if(nMinValue != nMaxValue) xField->set_range(nMinValue, nMaxValue); sal_Int64 nCurVal = 0; PropertyValue* pVal = maPController->getValue( aPropertyName ); if( pVal && pVal->Value.hasValue() ) pVal->Value >>= nCurVal; xField->set_value( nCurVal ); xField->connect_value_changed( LINK( this, PrintDialog, UIOption_SpinModifyHdl ) ); xField->show(); maExtraControls.emplace_back(std::move(xField)); weld::Widget* pWidget = maExtraControls.back().get(); maPropertyToWindowMap[ aPropertyName ].emplace_back(pWidget); maControlToPropertyMap[pWidget] = aPropertyName; // set help id setHelpId( pWidget, aHelpIds, 0 ); // set help text setHelpText( pWidget, aHelpTexts, 0 ); } else if (aCtrlType == "Edit") { std::unique_ptr xField = m_xBuilder->weld_entry(aID); if (!xField && mxCustomOptionsUIBuilder) xField = mxCustomOptionsUIBuilder->weld_entry(aID); if (!xField) continue; OUString aCurVal; PropertyValue* pVal = maPController->getValue( aPropertyName ); if( pVal && pVal->Value.hasValue() ) pVal->Value >>= aCurVal; xField->set_text( aCurVal ); xField->connect_changed( LINK( this, PrintDialog, UIOption_EntryModifyHdl ) ); xField->show(); maExtraControls.emplace_back(std::move(xField)); weld::Widget* pWidget = maExtraControls.back().get(); maPropertyToWindowMap[ aPropertyName ].emplace_back(pWidget); maControlToPropertyMap[pWidget] = aPropertyName; // set help id setHelpId( pWidget, aHelpIds, 0 ); // set help text setHelpText( pWidget, aHelpTexts, 0 ); } else { SAL_WARN( "vcl", "Unsupported UI option: \"" << aCtrlType << '"'); } } // #i106506# if no brochure button, then the singular Pages radio button // makes no sense, so replace it by a FixedText label if (!mxBrochureBtn->get_visible() && mxPagesBtn->get_visible()) { mxPagesBoxTitleTxt->set_label(mxPagesBtn->get_label()); mxPagesBoxTitleTxt->show(); mxPagesBtn->hide(); mxPagesBoxTitleTxt->set_accessible_relation_label_for(mxNupPagesBox.get()); mxNupPagesBox->set_accessible_relation_labeled_by(mxPagesBoxTitleTxt.get()); mxPagesBtn->set_accessible_relation_label_for(nullptr); } // update enable states checkOptionalControlDependencies(); // print range not shown (currently math only) -> hide spacer line and reverse order if (!mxPageRangeEdit->get_visible()) { mxReverseOrderBox->hide(); } if (!mxCustomOptionsUIBuilder) mxTabCtrl->remove_page(mxTabCtrl->get_page_ident(1)); } void PrintDialog::makeEnabled( weld::Widget* i_pWindow ) { auto it = maControlToPropertyMap.find( i_pWindow ); if( it != maControlToPropertyMap.end() ) { OUString aDependency( maPController->makeEnabled( it->second ) ); if( !aDependency.isEmpty() ) updateWindowFromProperty( aDependency ); } } void PrintDialog::updateWindowFromProperty( const OUString& i_rProperty ) { beans::PropertyValue* pValue = maPController->getValue( i_rProperty ); auto it = maPropertyToWindowMap.find( i_rProperty ); if( pValue && it != maPropertyToWindowMap.end() ) { const auto& rWindows( it->second ); if( ! rWindows.empty() ) { bool bVal = false; sal_Int32 nVal = -1; if( pValue->Value >>= bVal ) { // we should have a CheckBox for this one weld::CheckButton* pBox = dynamic_cast(rWindows.front()); if( pBox ) { pBox->set_active( bVal ); } else if ( i_rProperty == "PrintProspect" ) { // EVIL special case if( bVal ) mxBrochureBtn->set_active(true); else mxPagesBtn->set_active(true); } else { SAL_WARN( "vcl", "missing a checkbox" ); } } else if( pValue->Value >>= nVal ) { // this could be a ListBox or a RadioButtonGroup weld::ComboBox* pList = dynamic_cast(rWindows.front()); if( pList ) { pList->set_active( static_cast< sal_uInt16 >(nVal) ); } else if( nVal >= 0 && nVal < sal_Int32(rWindows.size() ) ) { weld::RadioButton* pBtn = dynamic_cast(rWindows[nVal]); SAL_WARN_IF( !pBtn, "vcl", "unexpected control for property" ); if( pBtn ) pBtn->set_active(true); } } } } } bool PrintDialog::isPrintToFile() const { return ( mxPrinters->get_active() == 0 ); } bool PrintDialog::isCollate() const { return mxCopyCountField->get_value() > 1 && mxCollateBox->get_active(); } bool PrintDialog::hasPreview() const { return mxPreviewBox->get_active(); } PropertyValue* PrintDialog::getValueForWindow( weld::Widget* i_pWindow ) const { PropertyValue* pVal = nullptr; auto it = maControlToPropertyMap.find( i_pWindow ); if( it != maControlToPropertyMap.end() ) { pVal = maPController->getValue( it->second ); SAL_WARN_IF( !pVal, "vcl", "property value not found" ); } else { OSL_FAIL( "changed control not in property map" ); } return pVal; } IMPL_LINK(PrintDialog, ToggleHdl, weld::ToggleButton&, rButton, void) { ClickHdl(rButton); } IMPL_LINK(PrintDialog, ClickHdl, weld::Button&, rButton, void) { if (&rButton == mxOKButton.get() || &rButton == mxCancelButton.get()) { storeToSettings(); m_xDialog->response(&rButton == mxOKButton.get() ? RET_OK : RET_CANCEL); } else if( &rButton == mxHelpButton.get() ) { // start help system Help* pHelp = Application::GetHelp(); if( pHelp ) { pHelp->Start("vcl/ui/printdialog/PrintDialog", mxOKButton.get()); } } else if ( &rButton == mxPreviewBox.get() ) { preparePreview( true ); } else if( &rButton == mxForwardBtn.get() ) { previewForward(); } else if( &rButton == mxBackwardBtn.get() ) { previewBackward(); } else if( &rButton == mxFirstBtn.get() ) { previewFirst(); } else if( &rButton == mxLastBtn.get() ) { previewLast(); } else if( &rButton == mxBrochureBtn.get() ) { PropertyValue* pVal = getValueForWindow( &rButton ); if( pVal ) { bool bVal = mxBrochureBtn->get_active(); pVal->Value <<= bVal; checkOptionalControlDependencies(); // update preview and page settings preparePreview(false); } if( mxBrochureBtn->get_active() ) { mxOrientationBox->set_sensitive( false ); mxOrientationBox->set_active( ORIENTATION_LANDSCAPE ); mxNupPagesBox->set_active( 0 ); updateNupFromPages(); showAdvancedControls( false ); enableNupControls( false ); } } else if( &rButton == mxPagesBtn.get() ) { mxOrientationBox->set_sensitive( true ); mxOrientationBox->set_active( ORIENTATION_AUTOMATIC ); enableNupControls( true ); updateNupFromPages(); } else if( &rButton == mxCollateBox.get() ) { maPController->setValue( "Collate", makeAny( isCollate() ) ); checkControlDependencies(); } else if( &rButton == mxReverseOrderBox.get() ) { bool bChecked = mxReverseOrderBox->get_active(); maPController->setReversePrint( bChecked ); maPController->setValue( "PrintReverse", makeAny( bChecked ) ); preparePreview( true ); } else if( &rButton == mxBorderCB.get() ) { updateNup(); } else if ( &rButton == mxMoreOptionsBtn.get() ) { mxMoreOptionsDlg.reset(new MoreOptionsDialog(this)); mxMoreOptionsDlg->run(); } else { if( &rButton == mxSetupButton.get() ) { maPController->setupPrinter(m_xDialog.get()); if ( !isPrintToFile() ) { VclPtr aPrt( maPController->getPrinter() ); mePaper = aPrt->GetPaper(); for (int nPaper = 0; nPaper < aPrt->GetPaperInfoCount(); nPaper++ ) { PaperInfo aInfo = aPrt->GetPaperInfo( nPaper ); aInfo.doSloppyFit(); Paper ePaper = aInfo.getPaper(); if ( mePaper == ePaper ) { mxPaperSizeBox->set_active( nPaper ); break; } } } updateOrientationBox( false ); setupPaperSidesBox(); // tdf#63905 don't use cache: page size may change preparePreview(false); } checkControlDependencies(); } } IMPL_LINK( PrintDialog, SelectHdl, weld::ComboBox&, rBox, void ) { if (&rBox == mxPrinters.get()) { if ( !isPrintToFile() ) { OUString aNewPrinter(rBox.get_active_text()); // set new printer maPController->setPrinter( VclPtrInstance( aNewPrinter ) ); maPController->resetPrinterOptions( false ); updateOrientationBox(); // update text fields mxOKButton->set_label(maPrintText); updatePrinterText(); setPaperSizes(); preparePreview(true); } else // print to file { // use the default printer or FIXME: the last used one? maPController->setPrinter( VclPtrInstance( Printer::GetDefaultPrinterName() ) ); mxOKButton->set_label(maPrintToFileText); maPController->resetPrinterOptions( true ); setPaperSizes(); updateOrientationBox(); preparePreview( true ); } setupPaperSidesBox(); } else if ( &rBox == mxPaperSidesBox.get() ) { DuplexMode eDuplex = static_cast(mxPaperSidesBox->get_active() + 1); maPController->getPrinter()->SetDuplexMode( eDuplex ); } else if( &rBox == mxOrientationBox.get() ) { int nOrientation = mxOrientationBox->get_active(); if ( nOrientation != ORIENTATION_AUTOMATIC ) setPaperOrientation( static_cast( nOrientation - 1 ) ); updateNup( false ); } else if ( &rBox == mxNupOrderBox.get() ) { updateNup(); } else if( &rBox == mxNupPagesBox.get() ) { if( !mxPagesBtn->get_active() ) mxPagesBtn->set_active(true); updateNupFromPages( false ); } else if ( &rBox == mxPaperSizeBox.get() ) { VclPtr aPrt( maPController->getPrinter() ); PaperInfo aInfo = aPrt->GetPaperInfo( rBox.get_active() ); aInfo.doSloppyFit(); mePaper = aInfo.getPaper(); if ( mePaper == PAPER_USER ) aPrt->SetPaperSizeUser( Size( aInfo.getWidth(), aInfo.getHeight() ) ); else aPrt->SetPaper( mePaper ); Size aPaperSize( aInfo.getWidth(), aInfo.getHeight() ); checkPaperSize( aPaperSize ); maPController->setPaperSizeFromUser( aPaperSize ); preparePreview(true); } } IMPL_LINK_NOARG(PrintDialog, MetricSpinModifyHdl, weld::MetricSpinButton&, void) { checkControlDependencies(); updateNupFromPages(); } IMPL_LINK_NOARG(PrintDialog, FocusOutHdl, weld::Widget&, void) { ActivateHdl(*mxPageEdit); } IMPL_LINK_NOARG(PrintDialog, ActivateHdl, weld::Entry&, bool) { sal_Int32 nPage = mxPageEdit->get_text().toInt32(); if (nPage < 1) { nPage = 1; mxPageEdit->set_text("1"); } else if (nPage > mnCachedPages) { nPage = mnCachedPages; mxPageEdit->set_text(OUString::number(mnCachedPages)); } int nNewCurPage = nPage - 1; if (nNewCurPage != mnCurPage) { mnCurPage = nNewCurPage; preparePreview(true); } return true; } IMPL_LINK( PrintDialog, SpinModifyHdl, weld::SpinButton&, rEdit, void ) { checkControlDependencies(); if (&rEdit == mxNupRowsEdt.get() || &rEdit == mxNupColEdt.get()) { updateNupFromPages(); } else if( &rEdit == mxCopyCountField.get() ) { maPController->setValue( "CopyCount", makeAny( sal_Int32(mxCopyCountField->get_value()) ) ); maPController->setValue( "Collate", makeAny( isCollate() ) ); } } IMPL_LINK( PrintDialog, UIOption_CheckHdl, weld::ToggleButton&, i_rBox, void ) { PropertyValue* pVal = getValueForWindow( &i_rBox ); if( pVal ) { makeEnabled( &i_rBox ); bool bVal = i_rBox.get_active(); pVal->Value <<= bVal; checkOptionalControlDependencies(); // update preview and page settings preparePreview(false); } } IMPL_LINK( PrintDialog, UIOption_RadioHdl, weld::ToggleButton&, i_rBtn, void ) { // this handler gets called for all radiobuttons that get unchecked, too // however we only want one notification for the new value (that is for // the button that gets checked) if( i_rBtn.get_active() ) { PropertyValue* pVal = getValueForWindow( &i_rBtn ); auto it = maControlToNumValMap.find( &i_rBtn ); if( pVal && it != maControlToNumValMap.end() ) { makeEnabled( &i_rBtn ); sal_Int32 nVal = it->second; pVal->Value <<= nVal; updateOrientationBox(); checkOptionalControlDependencies(); // tdf#41205 give focus to the page range edit if the corresponding radio button was selected if (pVal->Name == "PrintContent" && mxPageRangesRadioButton->get_active()) mxPageRangeEdit->grab_focus(); // update preview and page settings preparePreview(false); } } } IMPL_LINK( PrintDialog, UIOption_SelectHdl, weld::ComboBox&, i_rBox, void ) { PropertyValue* pVal = getValueForWindow( &i_rBox ); if( pVal ) { makeEnabled( &i_rBox ); sal_Int32 nVal( i_rBox.get_active() ); pVal->Value <<= nVal; //If we are in impress we start in print slides mode and get a //maFirstPageSize for slides which are usually landscape mode, if we //change to notes which are usually in portrait mode, and then visit //n-up print, we will assume notes are in landscape unless we throw //away maFirstPageSize when we change page content type if (pVal->Name == "PageContentType") maFirstPageSize = Size(); checkOptionalControlDependencies(); // update preview and page settings preparePreview(false); } } IMPL_LINK( PrintDialog, UIOption_SpinModifyHdl, weld::SpinButton&, i_rBox, void ) { PropertyValue* pVal = getValueForWindow( &i_rBox ); if( pVal ) { makeEnabled( &i_rBox ); sal_Int64 nVal = i_rBox.get_value(); pVal->Value <<= nVal; checkOptionalControlDependencies(); // update preview and page settings preparePreview(false); } } IMPL_LINK( PrintDialog, UIOption_EntryModifyHdl, weld::Entry&, i_rBox, void ) { PropertyValue* pVal = getValueForWindow( &i_rBox ); if( pVal ) { makeEnabled( &i_rBox ); OUString aVal( i_rBox.get_text() ); pVal->Value <<= aVal; checkOptionalControlDependencies(); // update preview and page settings preparePreview(false); } } void PrintDialog::previewForward() { sal_Int32 nValue = mxPageEdit->get_text().toInt32() + 1; if (nValue <= mnCachedPages) { mxPageEdit->set_text(OUString::number(nValue)); ActivateHdl(*mxPageEdit); } } void PrintDialog::previewBackward() { sal_Int32 nValue = mxPageEdit->get_text().toInt32() - 1; if (nValue >= 1) { mxPageEdit->set_text(OUString::number(nValue)); ActivateHdl(*mxPageEdit); } } void PrintDialog::previewFirst() { mxPageEdit->set_text("1"); ActivateHdl(*mxPageEdit); } void PrintDialog::previewLast() { mxPageEdit->set_text(OUString::number(mnCachedPages)); ActivateHdl(*mxPageEdit); } static OUString getNewLabel(const OUString& aLabel, int i_nCurr, int i_nMax) { OUString aNewText( aLabel.replaceFirst( "%p", OUString::number( i_nCurr ) ) ); aNewText = aNewText.replaceFirst( "%n", OUString::number( i_nMax ) ); return aNewText; } // PrintProgressDialog PrintProgressDialog::PrintProgressDialog(weld::Window* i_pParent, int i_nMax) : GenericDialogController(i_pParent, "vcl/ui/printprogressdialog.ui", "PrintProgressDialog") , mbCanceled(false) , mnCur(0) , mnMax(i_nMax) , mxText(m_xBuilder->weld_label("label")) , mxProgress(m_xBuilder->weld_progress_bar("progressbar")) , mxButton(m_xBuilder->weld_button("cancel")) { if( mnMax < 1 ) mnMax = 1; maStr = mxText->get_label(); //just multiply largest value by 10 and take the width of that string as //the max size we will want mxText->set_label(getNewLabel(maStr, mnMax * 10, mnMax * 10)); mxText->set_size_request(mxText->get_preferred_size().Width(), -1); //Pick a useful max width mxProgress->set_size_request(mxProgress->get_approximate_digit_width() * 25, -1); mxButton->connect_clicked( LINK( this, PrintProgressDialog, ClickHdl ) ); // after this patch f7157f04fab298423e2c4f6a7e5f8e361164b15f, we have seen the calc Max string (sometimes) look above // now init to the right start vaules mxText->set_label(getNewLabel(maStr, mnCur, mnMax)); } PrintProgressDialog::~PrintProgressDialog() { } IMPL_LINK_NOARG(PrintProgressDialog, ClickHdl, weld::Button&, void) { mbCanceled = true; } void PrintProgressDialog::setProgress( int i_nCurrent ) { mnCur = i_nCurrent; if( mnMax < 1 ) mnMax = 1; mxText->set_label(getNewLabel(maStr, mnCur, mnMax)); // here view the dialog, with the right label mxProgress->set_percentage(mnCur*100/mnMax); } void PrintProgressDialog::tick() { if( mnCur < mnMax ) setProgress( ++mnCur ); } /* vim:set shiftwidth=4 softtabstop=4 expandtab: */