Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 116 insertions, 0 deletions

diff --git a/Documentation/ABI/testing/sysfs-class-watchdog b/Documentation/ABI/testing/sysfs-class-watchdog
new file mode 100644
index 000000000..585caecda
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-watchdog
@@ -0,0 +1,116 @@
+What:		/sys/class/watchdog/watchdogn/bootstatus
+Date:		August 2015
+Contact:	Wim Van Sebroeck <wim@iguana.be>
+Description:
+		It is a read only file. It contains status of the watchdog
+		device at boot. It is equivalent to WDIOC_GETBOOTSTATUS of
+		ioctl interface.
+
+What:		/sys/class/watchdog/watchdogn/identity
+Date:		August 2015
+Contact:	Wim Van Sebroeck <wim@iguana.be>
+Description:
+		It is a read only file. It contains identity string of
+		watchdog device.
+
+What:		/sys/class/watchdog/watchdogn/nowayout
+Date:		August 2015
+Contact:	Wim Van Sebroeck <wim@iguana.be>
+Description:
+		It is a read/write file. While reading, it gives '1'
+		if the device has the nowayout feature set, otherwise
+		it gives '0'. Writing a '1' to the file enables the
+		nowayout feature. Once set, the nowayout feature
+		cannot be disabled, so writing a '0' either has no
+		effect (if the feature was already disabled) or
+		results in a permission error.
+
+What:		/sys/class/watchdog/watchdogn/state
+Date:		August 2015
+Contact:	Wim Van Sebroeck <wim@iguana.be>
+Description:
+		It is a read only file. It gives active/inactive status of
+		watchdog device.
+
+What:		/sys/class/watchdog/watchdogn/status
+Date:		August 2015
+Contact:	Wim Van Sebroeck <wim@iguana.be>
+Description:
+		It is a read only file. It contains watchdog device's
+		internal status bits. It is equivalent to WDIOC_GETSTATUS
+		of ioctl interface.
+
+What:		/sys/class/watchdog/watchdogn/timeleft
+Date:		August 2015
+Contact:	Wim Van Sebroeck <wim@iguana.be>
+Description:
+		It is a read only file. It contains value of time left for
+		reset generation. It is equivalent to WDIOC_GETTIMELEFT of
+		ioctl interface.
+
+What:		/sys/class/watchdog/watchdogn/timeout
+Date:		August 2015
+Contact:	Wim Van Sebroeck <wim@iguana.be>
+Description:
+		It is a read only file. It is read to know about current
+		value of timeout programmed.
+
+What:		/sys/class/watchdog/watchdogn/pretimeout
+Date:		December 2016
+Contact:	Wim Van Sebroeck <wim@iguana.be>
+Description:
+		It is a read only file. It specifies the time in seconds before
+		timeout when the pretimeout interrupt is delivered.  Pretimeout
+		is an optional feature.
+
+What:		/sys/class/watchdog/watchdogn/pretimeout_avaialable_governors
+Date:		February 2017
+Contact:	Wim Van Sebroeck <wim@iguana.be>
+Description:
+		It is a read only file. It shows the pretimeout governors
+		available for this watchdog.
+
+What:		/sys/class/watchdog/watchdogn/pretimeout_governor
+Date:		February 2017
+Contact:	Wim Van Sebroeck <wim@iguana.be>
+Description:
+		It is a read/write file. When read, the currently assigned
+		pretimeout governor is returned.  When written, it sets
+		the pretimeout governor.
+
+What:		/sys/class/watchdog/watchdog1/access_cs0
+Date:		August 2019
+Contact:	Ivan Mikhaylov <i.mikhaylov@yadro.com>,
+		Alexander Amelkin <a.amelkin@yadro.com>
+Description:
+		It is a read/write file. This attribute exists only if the
+		system has booted from the alternate flash chip due to
+		expiration of a watchdog timer of AST2400/AST2500 when
+		alternate boot function was enabled with 'aspeed,alt-boot'
+		devicetree option for that watchdog or with an appropriate
+		h/w strapping (for WDT2 only).
+
+		At alternate flash the 'access_cs0' sysfs node provides:
+
+			ast2400:
+				a way to get access to the primary SPI flash
+				chip at CS0 after booting from the alternate
+				chip at CS1.
+			ast2500:
+				a way to restore the normal address mapping
+				from (CS0->CS1, CS1->CS0) to (CS0->CS0,
+				CS1->CS1).
+
+		Clearing the boot code selection and timeout counter also
+		resets to the initial state the chip select line mapping. When
+		the SoC is in normal mapping state (i.e. booted from CS0),
+		clearing those bits does nothing for both versions of the SoC.
+		For alternate boot mode (booted from CS1 due to wdt2
+		expiration) the behavior differs as described above.
+
+		This option can be used with wdt2 (watchdog1) only.
+
+		When read, the current status of the boot code selection is
+		shown. When written with any non-zero value, it clears
+		the boot code selection and the timeout counter, which results
+		in chipselect reset for AST2400/AST2500.