diff options
| author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-27 10:05:51 +0000 |
|---|---|---|
| committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-27 10:05:51 +0000 |
| commit | 5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 (patch) | |
| tree | a94efe259b9009378be6d90eb30d2b019d95c194 /Documentation/devicetree/bindings/display | |
| parent | Initial commit. (diff) | |
| download | linux-5d1646d90e1f2cceb9f0828f4b28318cd0ec7744.tar.xz linux-5d1646d90e1f2cceb9f0828f4b28318cd0ec7744.zip | |
Adding upstream version 5.10.209.upstream/5.10.209
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'Documentation/devicetree/bindings/display')
229 files changed, 21071 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-backend.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-backend.yaml new file mode 100644 index 000000000..86057d541 --- /dev/null +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-backend.yaml @@ -0,0 +1,291 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-display-backend.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 Display Engine Backend Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +description: | + The display engine backend exposes layers and sprites to the system. + +properties: + compatible: + enum: + - allwinner,sun4i-a10-display-backend + - allwinner,sun5i-a13-display-backend + - allwinner,sun6i-a31-display-backend + - allwinner,sun7i-a20-display-backend + - allwinner,sun8i-a23-display-backend + - allwinner,sun8i-a33-display-backend + - allwinner,sun9i-a80-display-backend + + reg: + minItems: 1 + maxItems: 2 + items: + - description: Display Backend registers + - description: SAT registers + + reg-names: + minItems: 1 + maxItems: 2 + items: + - const: be + - const: sat + + interrupts: + maxItems: 1 + + clocks: + minItems: 3 + maxItems: 4 + items: + - description: The backend interface clock + - description: The backend module clock + - description: The backend DRAM clock + - description: The SAT clock + + clock-names: + minItems: 3 + maxItems: 4 + items: + - const: ahb + - const: mod + - const: ram + - const: sat + + resets: + minItems: 1 + maxItems: 2 + items: + - description: The Backend reset line + - description: The SAT reset line + + reset-names: + minItems: 1 + maxItems: 2 + items: + - const: be + - const: sat + + # FIXME: This should be made required eventually once every SoC will + # have the MBUS declared. + interconnects: + maxItems: 1 + + # FIXME: This should be made required eventually once every SoC will + # have the MBUS declared. + interconnect-names: + const: dma-mem + + ports: + type: object + description: | + A ports node with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + port@0: + type: object + description: | + Input endpoints of the controller. + + port@1: + type: object + description: | + Output endpoints of the controller. + + required: + - "#address-cells" + - "#size-cells" + - port@0 + - port@1 + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + - ports + +additionalProperties: false + +if: + properties: + compatible: + contains: + const: allwinner,sun8i-a33-display-backend + +then: + properties: + reg: + minItems: 2 + + reg-names: + minItems: 2 + + clocks: + minItems: 4 + + clock-names: + minItems: 4 + + resets: + minItems: 2 + + reset-names: + minItems: 2 + + required: + - reg-names + - reset-names + +else: + properties: + reg: + maxItems: 1 + + reg-names: + maxItems: 1 + + clocks: + maxItems: 3 + + clock-names: + maxItems: 3 + + resets: + maxItems: 1 + + reset-names: + maxItems: 1 + +examples: + - | + /* + * This comes from the clock/sun4i-a10-ccu.h and + * reset/sun4i-a10-ccu.h headers, but we can't include them since + * it would trigger a bunch of warnings for redefinitions of + * symbols with the other example. + */ + + #define CLK_AHB_DE_BE0 42 + #define CLK_DRAM_DE_BE0 140 + #define CLK_DE_BE0 144 + #define RST_DE_BE0 5 + + display-backend@1e60000 { + compatible = "allwinner,sun4i-a10-display-backend"; + reg = <0x01e60000 0x10000>; + interrupts = <47>; + clocks = <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>, + <&ccu CLK_DRAM_DE_BE0>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_DE_BE0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + endpoint@0 { + reg = <0>; + remote-endpoint = <&fe0_out_be0>; + }; + + endpoint@1 { + reg = <1>; + remote-endpoint = <&fe1_out_be0>; + }; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_in_be0>; + }; + + endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon1_in_be0>; + }; + }; + }; + }; + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + /* + * This comes from the clock/sun8i-a23-a33-ccu.h and + * reset/sun8i-a23-a33-ccu.h headers, but we can't include them + * since it would trigger a bunch of warnings for redefinitions of + * symbols with the other example. + */ + + #define CLK_BUS_DE_BE 40 + #define CLK_BUS_SAT 46 + #define CLK_DRAM_DE_BE 84 + #define CLK_DE_BE 85 + #define RST_BUS_DE_BE 21 + #define RST_BUS_SAT 27 + + display-backend@1e60000 { + compatible = "allwinner,sun8i-a33-display-backend"; + reg = <0x01e60000 0x10000>, <0x01e80000 0x1000>; + reg-names = "be", "sat"; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_DE_BE>, <&ccu CLK_DE_BE>, + <&ccu CLK_DRAM_DE_BE>, <&ccu CLK_BUS_SAT>; + clock-names = "ahb", "mod", + "ram", "sat"; + resets = <&ccu RST_BUS_DE_BE>, <&ccu RST_BUS_SAT>; + reset-names = "be", "sat"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + endpoint { + remote-endpoint = <&fe0_out_be0>; + }; + }; + + port@1 { + reg = <1>; + + endpoint { + remote-endpoint = <&drc0_in_be0>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml new file mode 100644 index 000000000..e77523b02 --- /dev/null +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml @@ -0,0 +1,113 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-display-engine.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 Display Engine Pipeline Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +description: | + The display engine pipeline (and its entry point, since it can be + either directly the backend or the frontend) is represented as an + extra node. + + The Allwinner A10 Display pipeline is composed of several components + that are going to be documented below: + + For all connections between components up to the TCONs in the + display pipeline, when there are multiple components of the same + type at the same depth, the local endpoint ID must be the same as + the remote component's index. For example, if the remote endpoint is + Frontend 1, then the local endpoint ID must be 1. + + Frontend 0 [0] ------- [0] Backend 0 [0] ------- [0] TCON 0 + [1] -- -- [1] [1] -- -- [1] + \ / \ / + X X + / \ / \ + [0] -- -- [0] [0] -- -- [0] + Frontend 1 [1] ------- [1] Backend 1 [1] ------- [1] TCON 1 + + For a two pipeline system such as the one depicted above, the lines + represent the connections between the components, while the numbers + within the square brackets corresponds to the ID of the local endpoint. + + The same rule also applies to DE 2.0 mixer-TCON connections: + + Mixer 0 [0] ----------- [0] TCON 0 + [1] ---- ---- [1] + \ / + X + / \ + [0] ---- ---- [0] + Mixer 1 [1] ----------- [1] TCON 1 + +properties: + compatible: + enum: + - allwinner,sun4i-a10-display-engine + - allwinner,sun5i-a10s-display-engine + - allwinner,sun5i-a13-display-engine + - allwinner,sun6i-a31-display-engine + - allwinner,sun6i-a31s-display-engine + - allwinner,sun7i-a20-display-engine + - allwinner,sun8i-a23-display-engine + - allwinner,sun8i-a33-display-engine + - allwinner,sun8i-a83t-display-engine + - allwinner,sun8i-h3-display-engine + - allwinner,sun8i-r40-display-engine + - allwinner,sun8i-v3s-display-engine + - allwinner,sun9i-a80-display-engine + - allwinner,sun50i-a64-display-engine + - allwinner,sun50i-h6-display-engine + + allwinner,pipelines: + $ref: /schemas/types.yaml#/definitions/phandle-array + minItems: 1 + maxItems: 2 + description: | + Available display engine frontends (DE 1.0) or mixers (DE + 2.0/3.0) available. + +required: + - compatible + - allwinner,pipelines + +additionalProperties: false + +if: + properties: + compatible: + contains: + enum: + - allwinner,sun4i-a10-display-engine + - allwinner,sun6i-a31-display-engine + - allwinner,sun6i-a31s-display-engine + - allwinner,sun7i-a20-display-engine + - allwinner,sun8i-a83t-display-engine + - allwinner,sun8i-r40-display-engine + - allwinner,sun9i-a80-display-engine + - allwinner,sun50i-a64-display-engine + +then: + properties: + allwinner,pipelines: + minItems: 2 + +else: + properties: + allwinner,pipelines: + maxItems: 1 + +examples: + - | + de: display-engine { + compatible = "allwinner,sun4i-a10-display-engine"; + allwinner,pipelines = <&fe0>, <&fe1>; + }; + +... diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml new file mode 100644 index 000000000..3eb1c2bbf --- /dev/null +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml @@ -0,0 +1,138 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-display-frontend.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 Display Engine Frontend Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +description: | + The display engine frontend does formats conversion, scaling, + deinterlacing and color space conversion. + +properties: + compatible: + enum: + - allwinner,sun4i-a10-display-frontend + - allwinner,sun5i-a13-display-frontend + - allwinner,sun6i-a31-display-frontend + - allwinner,sun7i-a20-display-frontend + - allwinner,sun8i-a23-display-frontend + - allwinner,sun8i-a33-display-frontend + - allwinner,sun9i-a80-display-frontend + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: The frontend interface clock + - description: The frontend module clock + - description: The frontend DRAM clock + + clock-names: + items: + - const: ahb + - const: mod + - const: ram + + # FIXME: This should be made required eventually once every SoC will + # have the MBUS declared. + interconnects: + maxItems: 1 + + # FIXME: This should be made required eventually once every SoC will + # have the MBUS declared. + interconnect-names: + const: dma-mem + + resets: + maxItems: 1 + + ports: + type: object + description: | + A ports node with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + port@0: + type: object + description: | + Input endpoints of the controller. + + port@1: + type: object + description: | + Output endpoints of the controller. + + required: + - "#address-cells" + - "#size-cells" + - port@1 + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/sun4i-a10-ccu.h> + #include <dt-bindings/reset/sun4i-a10-ccu.h> + + fe0: display-frontend@1e00000 { + compatible = "allwinner,sun4i-a10-display-frontend"; + reg = <0x01e00000 0x20000>; + interrupts = <47>; + clocks = <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_DE_FE0>, + <&ccu CLK_DRAM_DE_FE0>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_DE_FE0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + fe0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + fe0_out_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_in_fe0>; + }; + + fe0_out_be1: endpoint@1 { + reg = <1>; + remote-endpoint = <&be1_in_fe0>; + }; + }; + }; + }; + + +... diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml new file mode 100644 index 000000000..75e647939 --- /dev/null +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml @@ -0,0 +1,183 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-hdmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 HDMI Controller Device Tree Bindings + +description: | + The HDMI Encoder supports the HDMI video and audio outputs, and does + CEC. It is one end of the pipeline. + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +properties: + compatible: + oneOf: + - const: allwinner,sun4i-a10-hdmi + - const: allwinner,sun5i-a10s-hdmi + - const: allwinner,sun6i-a31-hdmi + - items: + - const: allwinner,sun7i-a20-hdmi + - const: allwinner,sun5i-a10s-hdmi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + oneOf: + - items: + - description: The HDMI interface clock + - description: The HDMI module clock + - description: The first video PLL + - description: The second video PLL + + - items: + - description: The HDMI interface clock + - description: The HDMI module clock + - description: The HDMI DDC clock + - description: The first video PLL + - description: The second video PLL + + clock-names: + oneOf: + - items: + - const: ahb + - const: mod + - const: pll-0 + - const: pll-1 + + - items: + - const: ahb + - const: mod + - const: ddc + - const: pll-0 + - const: pll-1 + + resets: + maxItems: 1 + + dmas: + items: + - description: DDC Transmission DMA Channel + - description: DDC Reception DMA Channel + - description: Audio Transmission DMA Channel + + dma-names: + items: + - const: ddc-tx + - const: ddc-rx + - const: audio-tx + + ports: + type: object + description: | + A ports node with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + port@0: + type: object + description: | + Input endpoints of the controller. + + port@1: + type: object + description: | + Output endpoints of the controller. Usually an HDMI + connector. + + required: + - "#address-cells" + - "#size-cells" + - port@0 + - port@1 + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - dmas + - dma-names + +if: + properties: + compatible: + contains: + const: allwinner,sun6i-a31-hdmi + +then: + properties: + clocks: + minItems: 5 + + clock-names: + minItems: 5 + + required: + - resets + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/sun4i-a10-ccu.h> + #include <dt-bindings/dma/sun4i-a10.h> + #include <dt-bindings/reset/sun4i-a10-ccu.h> + + hdmi: hdmi@1c16000 { + compatible = "allwinner,sun4i-a10-hdmi"; + reg = <0x01c16000 0x1000>; + interrupts = <58>; + clocks = <&ccu CLK_AHB_HDMI0>, <&ccu CLK_HDMI>, + <&ccu CLK_PLL_VIDEO0_2X>, + <&ccu CLK_PLL_VIDEO1_2X>; + clock-names = "ahb", "mod", "pll-0", "pll-1"; + dmas = <&dma SUN4I_DMA_NORMAL 16>, + <&dma SUN4I_DMA_NORMAL 16>, + <&dma SUN4I_DMA_DEDICATED 24>; + dma-names = "ddc-tx", "ddc-rx", "audio-tx"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + hdmi_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + hdmi_in_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_out_hdmi>; + }; + + hdmi_in_tcon1: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon1_out_hdmi>; + }; + }; + + hdmi_out: port@1 { + reg = <1>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml new file mode 100644 index 000000000..4c15a2644 --- /dev/null +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml @@ -0,0 +1,685 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-tcon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 Timings Controller (TCON) Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +description: | + The TCON acts as a timing controller for RGB, LVDS and TV + interfaces. + +properties: + "#clock-cells": + const: 0 + + compatible: + oneOf: + - const: allwinner,sun4i-a10-tcon + - const: allwinner,sun5i-a13-tcon + - const: allwinner,sun6i-a31-tcon + - const: allwinner,sun6i-a31s-tcon + - const: allwinner,sun7i-a20-tcon + - const: allwinner,sun8i-a23-tcon + - const: allwinner,sun8i-a33-tcon + - const: allwinner,sun8i-a83t-tcon-lcd + - const: allwinner,sun8i-a83t-tcon-tv + - const: allwinner,sun8i-r40-tcon-tv + - const: allwinner,sun8i-v3s-tcon + - const: allwinner,sun9i-a80-tcon-lcd + - const: allwinner,sun9i-a80-tcon-tv + + - items: + - enum: + - allwinner,sun7i-a20-tcon0 + - allwinner,sun7i-a20-tcon1 + - const: allwinner,sun7i-a20-tcon + + - items: + - enum: + - allwinner,sun50i-a64-tcon-lcd + - const: allwinner,sun8i-a83t-tcon-lcd + + - items: + - enum: + - allwinner,sun8i-h3-tcon-tv + - allwinner,sun50i-a64-tcon-tv + - const: allwinner,sun8i-a83t-tcon-tv + + - items: + - enum: + - allwinner,sun50i-h6-tcon-tv + - const: allwinner,sun8i-r40-tcon-tv + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 4 + + clock-names: + minItems: 1 + maxItems: 4 + + clock-output-names: + description: + Name of the LCD pixel clock created. + $ref: /schemas/types.yaml#/definitions/string-array + maxItems: 1 + + dmas: + maxItems: 1 + + resets: + anyOf: + - items: + - description: TCON Reset Line + + - items: + - description: TCON Reset Line + - description: TCON LVDS Reset Line + + - items: + - description: TCON Reset Line + - description: TCON eDP Reset Line + + - items: + - description: TCON Reset Line + - description: TCON eDP Reset Line + - description: TCON LVDS Reset Line + + reset-names: + oneOf: + - const: lcd + + - items: + - const: lcd + - const: lvds + + - items: + - const: lcd + - const: edp + + - items: + - const: lcd + - const: edp + - const: lvds + + ports: + type: object + description: | + A ports node with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + port@0: + type: object + description: | + Input endpoints of the controller. + + port@1: + type: object + description: | + Output endpoints of the controller. + + patternProperties: + "^endpoint(@[0-9])$": + type: object + + properties: + allwinner,tcon-channel: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + TCON can have 1 or 2 channels, usually with the + first channel being used for the panels interfaces + (RGB, LVDS, etc.), and the second being used for the + outputs that require another controller (TV Encoder, + HDMI, etc.). + + If that property is present, specifies the TCON + channel the endpoint is associated to. If that + property is not present, the endpoint number will be + used as the channel number. + + unevaluatedProperties: true + + required: + - "#address-cells" + - "#size-cells" + - port@0 + - port@1 + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + - ports + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun4i-a10-tcon + - allwinner,sun5i-a13-tcon + - allwinner,sun7i-a20-tcon + + then: + properties: + clocks: + minItems: 3 + + clock-names: + items: + - const: ahb + - const: tcon-ch0 + - const: tcon-ch1 + + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun6i-a31-tcon + - allwinner,sun6i-a31s-tcon + + then: + properties: + clocks: + minItems: 4 + + clock-names: + items: + - const: ahb + - const: tcon-ch0 + - const: tcon-ch1 + - const: lvds-alt + + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun8i-a23-tcon + - allwinner,sun8i-a33-tcon + + then: + properties: + clocks: + minItems: 3 + + clock-names: + items: + - const: ahb + - const: tcon-ch0 + - const: lvds-alt + + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun8i-a83t-tcon-lcd + - allwinner,sun8i-v3s-tcon + - allwinner,sun9i-a80-tcon-lcd + + then: + properties: + clocks: + minItems: 2 + + clock-names: + items: + - const: ahb + - const: tcon-ch0 + + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun8i-a83t-tcon-tv + - allwinner,sun8i-r40-tcon-tv + - allwinner,sun9i-a80-tcon-tv + + then: + properties: + clocks: + minItems: 2 + + clock-names: + items: + - const: ahb + - const: tcon-ch1 + + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun5i-a13-tcon + - allwinner,sun6i-a31-tcon + - allwinner,sun6i-a31s-tcon + - allwinner,sun7i-a20-tcon + - allwinner,sun8i-a23-tcon + - allwinner,sun8i-a33-tcon + - allwinner,sun8i-v3s-tcon + - allwinner,sun9i-a80-tcon-lcd + - allwinner,sun4i-a10-tcon + - allwinner,sun8i-a83t-tcon-lcd + + then: + required: + - "#clock-cells" + - clock-output-names + + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun6i-a31-tcon + - allwinner,sun6i-a31s-tcon + - allwinner,sun8i-a23-tcon + - allwinner,sun8i-a33-tcon + - allwinner,sun8i-a83t-tcon-lcd + + then: + properties: + resets: + minItems: 2 + + reset-names: + items: + - const: lcd + - const: lvds + + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun9i-a80-tcon-lcd + + then: + properties: + resets: + minItems: 3 + + reset-names: + items: + - const: lcd + - const: edp + - const: lvds + + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun9i-a80-tcon-tv + + then: + properties: + resets: + minItems: 2 + + reset-names: + items: + - const: lcd + - const: edp + + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun4i-a10-tcon + - allwinner,sun5i-a13-tcon + - allwinner,sun6i-a31-tcon + - allwinner,sun6i-a31s-tcon + - allwinner,sun7i-a20-tcon + - allwinner,sun8i-a23-tcon + - allwinner,sun8i-a33-tcon + + then: + required: + - dmas + +examples: + - | + #include <dt-bindings/dma/sun4i-a10.h> + + /* + * This comes from the clock/sun4i-a10-ccu.h and + * reset/sun4i-a10-ccu.h headers, but we can't include them since + * it would trigger a bunch of warnings for redefinitions of + * symbols with the other example. + */ + + #define CLK_AHB_LCD0 56 + #define CLK_TCON0_CH0 149 + #define CLK_TCON0_CH1 155 + #define RST_TCON0 11 + + lcd-controller@1c0c000 { + compatible = "allwinner,sun4i-a10-tcon"; + reg = <0x01c0c000 0x1000>; + interrupts = <44>; + resets = <&ccu RST_TCON0>; + reset-names = "lcd"; + clocks = <&ccu CLK_AHB_LCD0>, + <&ccu CLK_TCON0_CH0>, + <&ccu CLK_TCON0_CH1>; + clock-names = "ahb", + "tcon-ch0", + "tcon-ch1"; + clock-output-names = "tcon0-pixel-clock"; + #clock-cells = <0>; + dmas = <&dma SUN4I_DMA_DEDICATED 14>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_out_tcon0>; + }; + + endpoint@1 { + reg = <1>; + remote-endpoint = <&be1_out_tcon0>; + }; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + endpoint@1 { + reg = <1>; + remote-endpoint = <&hdmi_in_tcon0>; + allwinner,tcon-channel = <1>; + }; + }; + }; + }; + + #undef CLK_AHB_LCD0 + #undef CLK_TCON0_CH0 + #undef CLK_TCON0_CH1 + #undef RST_TCON0 + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + /* + * This comes from the clock/sun6i-a31-ccu.h and + * reset/sun6i-a31-ccu.h headers, but we can't include them since + * it would trigger a bunch of warnings for redefinitions of + * symbols with the other example. + */ + + #define CLK_PLL_MIPI 15 + #define CLK_AHB1_LCD0 47 + #define CLK_LCD0_CH0 127 + #define CLK_LCD0_CH1 129 + #define RST_AHB1_LCD0 27 + #define RST_AHB1_LVDS 41 + + lcd-controller@1c0c000 { + compatible = "allwinner,sun6i-a31-tcon"; + reg = <0x01c0c000 0x1000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma 11>; + resets = <&ccu RST_AHB1_LCD0>, <&ccu RST_AHB1_LVDS>; + reset-names = "lcd", "lvds"; + clocks = <&ccu CLK_AHB1_LCD0>, + <&ccu CLK_LCD0_CH0>, + <&ccu CLK_LCD0_CH1>, + <&ccu CLK_PLL_MIPI>; + clock-names = "ahb", + "tcon-ch0", + "tcon-ch1", + "lvds-alt"; + clock-output-names = "tcon0-pixel-clock"; + #clock-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + endpoint@0 { + reg = <0>; + remote-endpoint = <&drc0_out_tcon0>; + }; + + endpoint@1 { + reg = <1>; + remote-endpoint = <&drc1_out_tcon0>; + }; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + endpoint@1 { + reg = <1>; + remote-endpoint = <&hdmi_in_tcon0>; + allwinner,tcon-channel = <1>; + }; + }; + }; + }; + + #undef CLK_PLL_MIPI + #undef CLK_AHB1_LCD0 + #undef CLK_LCD0_CH0 + #undef CLK_LCD0_CH1 + #undef RST_AHB1_LCD0 + #undef RST_AHB1_LVDS + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + /* + * This comes from the clock/sun9i-a80-ccu.h and + * reset/sun9i-a80-ccu.h headers, but we can't include them since + * it would trigger a bunch of warnings for redefinitions of + * symbols with the other example. + */ + + #define CLK_BUS_LCD0 102 + #define CLK_LCD0 58 + #define RST_BUS_LCD0 22 + #define RST_BUS_EDP 24 + #define RST_BUS_LVDS 25 + + lcd-controller@3c00000 { + compatible = "allwinner,sun9i-a80-tcon-lcd"; + reg = <0x03c00000 0x10000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_LCD0>, <&ccu CLK_LCD0>; + clock-names = "ahb", "tcon-ch0"; + resets = <&ccu RST_BUS_LCD0>, <&ccu RST_BUS_EDP>, <&ccu RST_BUS_LVDS>; + reset-names = "lcd", "edp", "lvds"; + clock-output-names = "tcon0-pixel-clock"; + #clock-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + endpoint { + remote-endpoint = <&drc0_out_tcon0>; + }; + }; + + port@1 { + reg = <1>; + }; + }; + }; + + #undef CLK_BUS_TCON0 + #undef CLK_TCON0 + #undef RST_BUS_TCON0 + #undef RST_BUS_EDP + #undef RST_BUS_LVDS + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + /* + * This comes from the clock/sun8i-a83t-ccu.h and + * reset/sun8i-a83t-ccu.h headers, but we can't include them since + * it would trigger a bunch of warnings for redefinitions of + * symbols with the other example. + */ + + #define CLK_BUS_TCON0 36 + #define CLK_TCON0 85 + #define RST_BUS_TCON0 22 + #define RST_BUS_LVDS 31 + + lcd-controller@1c0c000 { + compatible = "allwinner,sun8i-a83t-tcon-lcd"; + reg = <0x01c0c000 0x1000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>; + clock-names = "ahb", "tcon-ch0"; + clock-output-names = "tcon-pixel-clock"; + #clock-cells = <0>; + resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>; + reset-names = "lcd", "lvds"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + endpoint@0 { + reg = <0>; + remote-endpoint = <&mixer0_out_tcon0>; + }; + + endpoint@1 { + reg = <1>; + remote-endpoint = <&mixer1_out_tcon0>; + }; + }; + + port@1 { + reg = <1>; + }; + }; + }; + + #undef CLK_BUS_TCON0 + #undef CLK_TCON0 + #undef RST_BUS_TCON0 + #undef RST_BUS_LVDS + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + /* + * This comes from the clock/sun8i-r40-ccu.h and + * reset/sun8i-r40-ccu.h headers, but we can't include them since + * it would trigger a bunch of warnings for redefinitions of + * symbols with the other example. + */ + + #define CLK_BUS_TCON_TV0 73 + #define RST_BUS_TCON_TV0 49 + + tcon_tv0: lcd-controller@1c73000 { + compatible = "allwinner,sun8i-r40-tcon-tv"; + reg = <0x01c73000 0x1000>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_TCON_TV0>, <&tcon_top 0>; + clock-names = "ahb", "tcon-ch1"; + resets = <&ccu RST_BUS_TCON_TV0>; + reset-names = "lcd"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon_top_mixer0_out_tcon_tv0>; + }; + + endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon_top_mixer1_out_tcon_tv0>; + }; + }; + + tcon_tv0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon_top_hdmi_in_tcon_tv0>; + }; + }; + }; + }; + + #undef CLK_BUS_TCON_TV0 + #undef RST_BUS_TCON_TV0 + +... diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml new file mode 100644 index 000000000..6009324be --- /dev/null +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-tv-encoder.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 TV Encoder Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +properties: + compatible: + const: allwinner,sun4i-a10-tv-encoder + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + port: + type: object + description: + A port node with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. The + first port should be the input endpoint, usually coming from the + associated TCON. + +required: + - compatible + - reg + - clocks + - resets + - port + +additionalProperties: false + +examples: + - | + tve0: tv-encoder@1c0a000 { + compatible = "allwinner,sun4i-a10-tv-encoder"; + reg = <0x01c0a000 0x1000>; + clocks = <&ahb_gates 34>; + resets = <&tcon_ch0_clk 0>; + + port { + tve0_in_tcon0: endpoint { + remote-endpoint = <&tcon0_out_tve0>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml new file mode 100644 index 000000000..0c1ce5594 --- /dev/null +++ b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml @@ -0,0 +1,138 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/allwinner,sun6i-a31-drc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A31 Dynamic Range Controller Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +description: | + The DRC (Dynamic Range Controller) allows to dynamically adjust + pixel brightness/contrast based on histogram measurements for LCD + content adaptive backlight control. + +properties: + compatible: + enum: + - allwinner,sun6i-a31-drc + - allwinner,sun6i-a31s-drc + - allwinner,sun8i-a23-drc + - allwinner,sun8i-a33-drc + - allwinner,sun9i-a80-drc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: The DRC interface clock + - description: The DRC module clock + - description: The DRC DRAM clock + + clock-names: + items: + - const: ahb + - const: mod + - const: ram + + resets: + maxItems: 1 + + ports: + type: object + description: | + A ports node with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + port@0: + type: object + description: | + Input endpoints of the controller. + + port@1: + type: object + description: | + Output endpoints of the controller. + + required: + - "#address-cells" + - "#size-cells" + - port@0 + - port@1 + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + #include <dt-bindings/clock/sun6i-a31-ccu.h> + #include <dt-bindings/reset/sun6i-a31-ccu.h> + + drc0: drc@1e70000 { + compatible = "allwinner,sun6i-a31-drc"; + reg = <0x01e70000 0x10000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_AHB1_DRC0>, <&ccu CLK_IEP_DRC0>, + <&ccu CLK_DRAM_DRC0>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_AHB1_DRC0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + drc0_in: port@0 { + reg = <0>; + + drc0_in_be0: endpoint { + remote-endpoint = <&be0_out_drc0>; + }; + }; + + drc0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + drc0_out_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_in_drc0>; + }; + + drc0_out_tcon1: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon1_in_drc0>; + }; + }; + }; + }; + + +... diff --git a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml new file mode 100644 index 000000000..7aa330dab --- /dev/null +++ b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml @@ -0,0 +1,127 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/allwinner,sun6i-a31-mipi-dsi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A31 MIPI-DSI Controller Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +properties: + compatible: + enum: + - allwinner,sun6i-a31-mipi-dsi + - allwinner,sun50i-a64-mipi-dsi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 2 + items: + - description: Bus Clock + - description: Module Clock + + clock-names: + items: + - const: bus + - const: mod + + resets: + maxItems: 1 + + vcc-dsi-supply: + description: VCC-DSI power supply of the DSI encoder + + phys: + maxItems: 1 + + phy-names: + const: dphy + + port: + type: object + description: + A port node with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. That + port should be the input endpoint, usually coming from the + associated TCON. + +required: + - compatible + - reg + - interrupts + - clocks + - phys + - phy-names + - resets + - vcc-dsi-supply + - port + +allOf: + - $ref: dsi-controller.yaml# + - if: + properties: + compatible: + contains: + const: allwinner,sun6i-a31-mipi-dsi + + then: + properties: + clocks: + minItems: 2 + + required: + - clock-names + + - if: + properties: + compatible: + contains: + const: allwinner,sun50i-a64-mipi-dsi + + then: + properties: + clocks: + minItems: 1 + +unevaluatedProperties: false + +examples: + - | + dsi0: dsi@1ca0000 { + compatible = "allwinner,sun6i-a31-mipi-dsi"; + reg = <0x01ca0000 0x1000>; + interrupts = <0 89 4>; + clocks = <&ccu 23>, <&ccu 96>; + clock-names = "bus", "mod"; + resets = <&ccu 4>; + phys = <&dphy0>; + phy-names = "dphy"; + vcc-dsi-supply = <®_dcdc1>; + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "bananapi,lhr050h41", "ilitek,ili9881c"; + reg = <0>; + power-supply = <®_display>; + reset-gpios = <&r_pio 0 5 1>; /* PL05 */ + backlight = <&pwm_bl>; + }; + + port { + dsi0_in_tcon0: endpoint { + remote-endpoint = <&tcon0_out_dsi0>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml new file mode 100644 index 000000000..c040eef56 --- /dev/null +++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml @@ -0,0 +1,121 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/allwinner,sun8i-a83t-de2-mixer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner Display Engine 2.0 Mixer Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +properties: + compatible: + enum: + - allwinner,sun8i-a83t-de2-mixer-0 + - allwinner,sun8i-a83t-de2-mixer-1 + - allwinner,sun8i-h3-de2-mixer-0 + - allwinner,sun8i-r40-de2-mixer-0 + - allwinner,sun8i-r40-de2-mixer-1 + - allwinner,sun8i-v3s-de2-mixer + - allwinner,sun50i-a64-de2-mixer-0 + - allwinner,sun50i-a64-de2-mixer-1 + - allwinner,sun50i-h6-de3-mixer-0 + + reg: + maxItems: 1 + + clocks: + items: + - description: The mixer interface clock + - description: The mixer module clock + + clock-names: + items: + - const: bus + - const: mod + + iommus: + maxItems: 1 + + resets: + maxItems: 1 + + ports: + type: object + description: | + A ports node with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + port@0: + type: object + description: | + Input endpoints of the controller. + + port@1: + type: object + description: | + Output endpoints of the controller. + + required: + - "#address-cells" + - "#size-cells" + - port@1 + + additionalProperties: false + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/sun8i-de2.h> + #include <dt-bindings/reset/sun8i-de2.h> + + mixer0: mixer@1100000 { + compatible = "allwinner,sun8i-a83t-de2-mixer-0"; + reg = <0x01100000 0x100000>; + clocks = <&display_clocks CLK_BUS_MIXER0>, + <&display_clocks CLK_MIXER0>; + clock-names = "bus", + "mod"; + resets = <&display_clocks RST_MIXER0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + mixer0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + mixer0_out_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_in_mixer0>; + }; + + mixer0_out_tcon1: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon1_in_mixer0>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml new file mode 100644 index 000000000..fa4769a0b --- /dev/null +++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml @@ -0,0 +1,273 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/allwinner,sun8i-a83t-dw-hdmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A83t DWC HDMI TX Encoder Device Tree Bindings + +description: | + The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller + IP with Allwinner\'s own PHY IP. It supports audio and video outputs + and CEC. + + These DT bindings follow the Synopsys DWC HDMI TX bindings defined + in Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt with + the following device-specific properties. + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +properties: + "#phy-cells": + const: 0 + + compatible: + oneOf: + - const: allwinner,sun8i-a83t-dw-hdmi + - const: allwinner,sun50i-h6-dw-hdmi + + - items: + - enum: + - allwinner,sun8i-h3-dw-hdmi + - allwinner,sun8i-r40-dw-hdmi + - allwinner,sun50i-a64-dw-hdmi + - const: allwinner,sun8i-a83t-dw-hdmi + + reg: + maxItems: 1 + + reg-io-width: + const: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 3 + maxItems: 6 + items: + - description: Bus Clock + - description: Register Clock + - description: TMDS Clock + - description: HDMI CEC Clock + - description: HDCP Clock + - description: HDCP Bus Clock + + clock-names: + minItems: 3 + maxItems: 6 + items: + - const: iahb + - const: isfr + - const: tmds + - const: cec + - const: hdcp + - const: hdcp-bus + + resets: + minItems: 1 + maxItems: 2 + items: + - description: HDMI Controller Reset + - description: HDCP Reset + + reset-names: + minItems: 1 + maxItems: 2 + items: + - const: ctrl + - const: hdcp + + phys: + maxItems: 1 + description: + Phandle to the DWC HDMI PHY. + + phy-names: + const: phy + + hvcc-supply: + description: + The VCC power supply of the controller + + ports: + type: object + description: | + A ports node with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + port@0: + type: object + description: | + Input endpoints of the controller. Usually the associated + TCON. + + port@1: + type: object + description: | + Output endpoints of the controller. Usually an HDMI + connector. + + required: + - "#address-cells" + - "#size-cells" + - port@0 + - port@1 + + additionalProperties: false + +required: + - compatible + - reg + - reg-io-width + - interrupts + - clocks + - clock-names + - resets + - reset-names + - phys + - phy-names + - ports + +if: + properties: + compatible: + contains: + enum: + - allwinner,sun50i-h6-dw-hdmi + +then: + properties: + clocks: + minItems: 6 + + clock-names: + minItems: 6 + + resets: + minItems: 2 + + reset-names: + minItems: 2 + + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + /* + * This comes from the clock/sun8i-a83t-ccu.h and + * reset/sun8i-a83t-ccu.h headers, but we can't include them since + * it would trigger a bunch of warnings for redefinitions of + * symbols with the other example. + */ + #define CLK_BUS_HDMI 39 + #define CLK_HDMI 93 + #define CLK_HDMI_SLOW 94 + #define RST_BUS_HDMI1 26 + + hdmi@1ee0000 { + compatible = "allwinner,sun8i-a83t-dw-hdmi"; + reg = <0x01ee0000 0x10000>; + reg-io-width = <1>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>, + <&ccu CLK_HDMI>; + clock-names = "iahb", "isfr", "tmds"; + resets = <&ccu RST_BUS_HDMI1>; + reset-names = "ctrl"; + phys = <&hdmi_phy>; + phy-names = "phy"; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_pins>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + endpoint { + remote-endpoint = <&tcon1_out_hdmi>; + }; + }; + + port@1 { + reg = <1>; + }; + }; + }; + + /* Cleanup after ourselves */ + #undef CLK_BUS_HDMI + #undef CLK_HDMI + #undef CLK_HDMI_SLOW + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + /* + * This comes from the clock/sun50i-h6-ccu.h and + * reset/sun50i-h6-ccu.h headers, but we can't include them since + * it would trigger a bunch of warnings for redefinitions of + * symbols with the other example. + */ + #define CLK_BUS_HDMI 126 + #define CLK_BUS_HDCP 137 + #define CLK_HDMI 123 + #define CLK_HDMI_SLOW 124 + #define CLK_HDMI_CEC 125 + #define CLK_HDCP 136 + #define RST_BUS_HDMI_SUB 57 + #define RST_BUS_HDCP 62 + + hdmi@6000000 { + compatible = "allwinner,sun50i-h6-dw-hdmi"; + reg = <0x06000000 0x10000>; + reg-io-width = <1>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>, + <&ccu CLK_HDMI>, <&ccu CLK_HDMI_CEC>, + <&ccu CLK_HDCP>, <&ccu CLK_BUS_HDCP>; + clock-names = "iahb", "isfr", "tmds", "cec", "hdcp", + "hdcp-bus"; + resets = <&ccu RST_BUS_HDMI_SUB>, <&ccu RST_BUS_HDCP>; + reset-names = "ctrl", "hdcp"; + phys = <&hdmi_phy>; + phy-names = "phy"; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_pins>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + endpoint { + remote-endpoint = <&tcon_top_hdmi_out_hdmi>; + }; + }; + + port@1 { + reg = <1>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml new file mode 100644 index 000000000..501cec161 --- /dev/null +++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml @@ -0,0 +1,117 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/allwinner,sun8i-a83t-hdmi-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A83t HDMI PHY Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +properties: + "#phy-cells": + const: 0 + + compatible: + enum: + - allwinner,sun8i-a83t-hdmi-phy + - allwinner,sun8i-h3-hdmi-phy + - allwinner,sun8i-r40-hdmi-phy + - allwinner,sun50i-a64-hdmi-phy + - allwinner,sun50i-h6-hdmi-phy + + reg: + maxItems: 1 + + clocks: + minItems: 2 + maxItems: 4 + items: + - description: Bus Clock + - description: Module Clock + - description: Parent of the PHY clock + - description: Second possible parent of the PHY clock + + clock-names: + minItems: 2 + maxItems: 4 + items: + - const: bus + - const: mod + - const: pll-0 + - const: pll-1 + + resets: + maxItems: 1 + + reset-names: + const: phy + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - reset-names + +if: + properties: + compatible: + contains: + enum: + - allwinner,sun8i-r40-hdmi-phy + +then: + properties: + clocks: + minItems: 4 + + clock-names: + minItems: 4 + +else: + if: + properties: + compatible: + contains: + enum: + - allwinner,sun8i-h3-hdmi-phy + - allwinner,sun50i-a64-hdmi-phy + + then: + properties: + clocks: + minItems: 3 + + clock-names: + minItems: 3 + + else: + properties: + clocks: + maxItems: 2 + + clock-names: + maxItems: 2 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/sun8i-a83t-ccu.h> + #include <dt-bindings/reset/sun8i-a83t-ccu.h> + + hdmi_phy: hdmi-phy@1ef0000 { + compatible = "allwinner,sun8i-a83t-hdmi-phy"; + reg = <0x01ef0000 0x10000>; + clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>; + clock-names = "bus", "mod"; + resets = <&ccu RST_BUS_HDMI0>; + reset-names = "phy"; + #phy-cells = <0>; + }; + +... diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml new file mode 100644 index 000000000..b98ca6098 --- /dev/null +++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml @@ -0,0 +1,382 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/allwinner,sun8i-r40-tcon-top.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner R40 TCON TOP Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +description: | + TCON TOPs main purpose is to configure whole display pipeline. It + determines relationships between mixers and TCONs, selects source + TCON for HDMI, muxes LCD and TV encoder GPIO output, selects TV + encoder clock source and contains additional TV TCON and DSI gates. + + It allows display pipeline to be configured in very different ways: + + / LCD0/LVDS0 + / [0] TCON-LCD0 + | \ MIPI DSI + mixer0 | + \ / [1] TCON-LCD1 - LCD1/LVDS1 + TCON-TOP + / \ [2] TCON-TV0 [0] - TVE0/RGB + mixer1 | \ + | TCON-TOP - HDMI + | / + \ [3] TCON-TV1 [1] - TVE1/RGB + + Note that both TCON TOP references same physical unit. Both mixers + can be connected to any TCON. Not all TCON TOP variants support all + features. + +properties: + "#clock-cells": + const: 1 + + compatible: + enum: + - allwinner,sun8i-r40-tcon-top + - allwinner,sun50i-h6-tcon-top + + reg: + maxItems: 1 + + clocks: + minItems: 2 + maxItems: 6 + items: + - description: The TCON TOP interface clock + - description: The TCON TOP TV0 clock + - description: The TCON TOP TVE0 clock + - description: The TCON TOP TV1 clock + - description: The TCON TOP TVE1 clock + - description: The TCON TOP MIPI DSI clock + + clock-names: + minItems: 2 + maxItems: 6 + items: + - const: bus + - const: tcon-tv0 + - const: tve0 + - const: tcon-tv1 + - const: tve1 + - const: dsi + + clock-output-names: + minItems: 1 + maxItems: 3 + description: > + The first item is the name of the clock created for the TV0 + channel, the second item is the name of the TCON TV1 channel + clock and the third one is the name of the DSI channel clock. + + resets: + maxItems: 1 + + ports: + type: object + description: | + A ports node with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + All ports should have only one endpoint connected to + remote endpoint. + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + port@0: + type: object + description: | + Input endpoint for Mixer 0 mux. + + port@1: + type: object + description: | + Output endpoint for Mixer 0 mux + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + reg: true + + patternProperties: + "^endpoint@[0-9]$": + type: object + + properties: + reg: + description: | + ID of the target TCON + + required: + - reg + + required: + - "#address-cells" + - "#size-cells" + + additionalProperties: false + + port@2: + type: object + description: | + Input endpoint for Mixer 1 mux. + + port@3: + type: object + description: | + Output endpoint for Mixer 1 mux + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + reg: true + + patternProperties: + "^endpoint@[0-9]$": + type: object + + properties: + reg: + description: | + ID of the target TCON + + required: + - reg + + required: + - "#address-cells" + - "#size-cells" + + additionalProperties: false + + port@4: + type: object + description: | + Input endpoint for HDMI mux. + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + reg: true + + patternProperties: + "^endpoint@[0-9]$": + type: object + + properties: + reg: + description: | + ID of the target TCON + + required: + - reg + + required: + - "#address-cells" + - "#size-cells" + + additionalProperties: false + + port@5: + type: object + description: | + Output endpoint for HDMI mux + + required: + - "#address-cells" + - "#size-cells" + - port@0 + - port@1 + - port@4 + - port@5 + + additionalProperties: false + +required: + - "#clock-cells" + - compatible + - reg + - clocks + - clock-names + - clock-output-names + - resets + - ports + +additionalProperties: false + +if: + properties: + compatible: + contains: + const: allwinner,sun50i-h6-tcon-top + +then: + properties: + clocks: + maxItems: 2 + + clock-output-names: + maxItems: 1 + +else: + properties: + clocks: + minItems: 6 + + clock-output-names: + minItems: 3 + + ports: + required: + - port@2 + - port@3 + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + #include <dt-bindings/clock/sun8i-r40-ccu.h> + #include <dt-bindings/reset/sun8i-r40-ccu.h> + + tcon_top: tcon-top@1c70000 { + compatible = "allwinner,sun8i-r40-tcon-top"; + reg = <0x01c70000 0x1000>; + clocks = <&ccu CLK_BUS_TCON_TOP>, + <&ccu CLK_TCON_TV0>, + <&ccu CLK_TVE0>, + <&ccu CLK_TCON_TV1>, + <&ccu CLK_TVE1>, + <&ccu CLK_DSI_DPHY>; + clock-names = "bus", + "tcon-tv0", + "tve0", + "tcon-tv1", + "tve1", + "dsi"; + clock-output-names = "tcon-top-tv0", + "tcon-top-tv1", + "tcon-top-dsi"; + resets = <&ccu RST_BUS_TCON_TOP>; + #clock-cells = <1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon_top_mixer0_in: port@0 { + reg = <0>; + + tcon_top_mixer0_in_mixer0: endpoint { + remote-endpoint = <&mixer0_out_tcon_top>; + }; + }; + + tcon_top_mixer0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + tcon_top_mixer0_out_tcon_lcd0: endpoint@0 { + reg = <0>; + }; + + tcon_top_mixer0_out_tcon_lcd1: endpoint@1 { + reg = <1>; + }; + + tcon_top_mixer0_out_tcon_tv0: endpoint@2 { + reg = <2>; + remote-endpoint = <&tcon_tv0_in_tcon_top_mixer0>; + }; + + tcon_top_mixer0_out_tcon_tv1: endpoint@3 { + reg = <3>; + remote-endpoint = <&tcon_tv1_in_tcon_top_mixer0>; + }; + }; + + tcon_top_mixer1_in: port@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + tcon_top_mixer1_in_mixer1: endpoint@1 { + reg = <1>; + remote-endpoint = <&mixer1_out_tcon_top>; + }; + }; + + tcon_top_mixer1_out: port@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + tcon_top_mixer1_out_tcon_lcd0: endpoint@0 { + reg = <0>; + }; + + tcon_top_mixer1_out_tcon_lcd1: endpoint@1 { + reg = <1>; + }; + + tcon_top_mixer1_out_tcon_tv0: endpoint@2 { + reg = <2>; + remote-endpoint = <&tcon_tv0_in_tcon_top_mixer1>; + }; + + tcon_top_mixer1_out_tcon_tv1: endpoint@3 { + reg = <3>; + remote-endpoint = <&tcon_tv1_in_tcon_top_mixer1>; + }; + }; + + tcon_top_hdmi_in: port@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + + tcon_top_hdmi_in_tcon_tv0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon_tv0_out_tcon_top>; + }; + + tcon_top_hdmi_in_tcon_tv1: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon_tv1_out_tcon_top>; + }; + }; + + tcon_top_hdmi_out: port@5 { + reg = <5>; + + tcon_top_hdmi_out_hdmi: endpoint { + remote-endpoint = <&hdmi_in_tcon_top>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/allwinner,sun9i-a80-deu.yaml b/Documentation/devicetree/bindings/display/allwinner,sun9i-a80-deu.yaml new file mode 100644 index 000000000..96de41d32 --- /dev/null +++ b/Documentation/devicetree/bindings/display/allwinner,sun9i-a80-deu.yaml @@ -0,0 +1,133 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/allwinner,sun9i-a80-deu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A80 Detail Enhancement Unit Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +description: | + The DEU (Detail Enhancement Unit), found in the Allwinner A80 SoC, + can sharpen the display content in both luma and chroma channels. + +properties: + compatible: + const: allwinner,sun9i-a80-deu + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: The DEU interface clock + - description: The DEU module clock + - description: The DEU DRAM clock + + clock-names: + items: + - const: ahb + - const: mod + - const: ram + + resets: + maxItems: 1 + + ports: + type: object + description: | + A ports node with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + port@0: + type: object + description: | + Input endpoints of the controller. + + port@1: + type: object + description: | + Output endpoints of the controller. + + required: + - "#address-cells" + - "#size-cells" + - port@0 + - port@1 + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + #include <dt-bindings/clock/sun9i-a80-de.h> + #include <dt-bindings/reset/sun9i-a80-de.h> + + deu0: deu@3300000 { + compatible = "allwinner,sun9i-a80-deu"; + reg = <0x03300000 0x40000>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&de_clocks CLK_BUS_DEU0>, + <&de_clocks CLK_IEP_DEU0>, + <&de_clocks CLK_DRAM_DEU0>; + clock-names = "ahb", + "mod", + "ram"; + resets = <&de_clocks RST_DEU0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + deu0_in: port@0 { + reg = <0>; + + deu0_in_fe0: endpoint { + remote-endpoint = <&fe0_out_deu0>; + }; + }; + + deu0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + deu0_out_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_in_deu0>; + }; + + deu0_out_be1: endpoint@1 { + reg = <1>; + remote-endpoint = <&be1_in_deu0>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml new file mode 100644 index 000000000..8a67bb889 --- /dev/null +++ b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml @@ -0,0 +1,153 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 BayLibre, SAS +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/display/amlogic,meson-dw-hdmi.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Amlogic specific extensions to the Synopsys Designware HDMI Controller + +maintainers: + - Neil Armstrong <narmstrong@baylibre.com> + +allOf: + - $ref: /schemas/sound/name-prefix.yaml# + +description: | + The Amlogic Meson Synopsys Designware Integration is composed of + - A Synopsys DesignWare HDMI Controller IP + - A TOP control block controlling the Clocks and PHY + - A custom HDMI PHY in order to convert video to TMDS signal + ___________________________________ + | HDMI TOP |<= HPD + |___________________________________| + | | | + | Synopsys HDMI | HDMI PHY |=> TMDS + | Controller |________________| + |___________________________________|<=> DDC + + The HDMI TOP block only supports HPD sensing. + The Synopsys HDMI Controller interrupt is routed through the + TOP Block interrupt. + Communication to the TOP Block and the Synopsys HDMI Controller is done + via a pair of dedicated addr+read/write registers. + The HDMI PHY is configured by registers in the HHI register block. + + Pixel data arrives in "4:4:4" format from the VENC block and the VPU HDMI mux + selects either the ENCI encoder for the 576i or 480i formats or the ENCP + encoder for all the other formats including interlaced HD formats. + + The VENC uses a DVI encoder on top of the ENCI or ENCP encoders to generate + DVI timings for the HDMI controller. + + Amlogic Meson GXBB, GXL and GXM SoCs families embeds the Synopsys DesignWare + HDMI TX IP version 2.01a with HDCP and I2C & S/PDIF + audio source interfaces. + +properties: + compatible: + oneOf: + - items: + - enum: + - amlogic,meson-gxbb-dw-hdmi # GXBB (S905) + - amlogic,meson-gxl-dw-hdmi # GXL (S905X, S905D) + - amlogic,meson-gxm-dw-hdmi # GXM (S912) + - const: amlogic,meson-gx-dw-hdmi + - enum: + - amlogic,meson-g12a-dw-hdmi # G12A (S905X2, S905Y2, S905D2) + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 3 + + clock-names: + items: + - const: isfr + - const: iahb + - const: venci + + resets: + minItems: 3 + + reset-names: + items: + - const: hdmitx_apb + - const: hdmitx + - const: hdmitx_phy + + hdmi-supply: + description: phandle to an external 5V regulator to power the HDMI logic + + port@0: + type: object + description: + A port node pointing to the VENC Input port node. + + port@1: + type: object + description: + A port node pointing to the TMDS Output port node. + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + "#sound-dai-cells": + const: 0 + + sound-name-prefix: true + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + - reset-names + - port@0 + - port@1 + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + hdmi_tx: hdmi-tx@c883a000 { + compatible = "amlogic,meson-gxbb-dw-hdmi", "amlogic,meson-gx-dw-hdmi"; + reg = <0xc883a000 0x1c>; + interrupts = <57>; + resets = <&reset_apb>, <&reset_hdmitx>, <&reset_hdmitx_phy>; + reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy"; + clocks = <&clk_isfr>, <&clk_iahb>, <&clk_venci>; + clock-names = "isfr", "iahb", "venci"; + #address-cells = <1>; + #size-cells = <0>; + + /* VPU VENC Input */ + hdmi_tx_venc_port: port@0 { + reg = <0>; + + hdmi_tx_in: endpoint { + remote-endpoint = <&hdmi_tx_out>; + }; + }; + + /* TMDS Output */ + hdmi_tx_tmds_port: port@1 { + reg = <1>; + + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; + diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml new file mode 100644 index 000000000..b8cb1b4da --- /dev/null +++ b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml @@ -0,0 +1,145 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 BayLibre, SAS +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/display/amlogic,meson-vpu.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Amlogic Meson Display Controller + +maintainers: + - Neil Armstrong <narmstrong@baylibre.com> + +description: | + The Amlogic Meson Display controller is composed of several components + that are going to be documented below + + DMC|---------------VPU (Video Processing Unit)----------------|------HHI------| + | vd1 _______ _____________ _________________ | | + D |-------| |----| | | | | HDMI PLL | + D | vd2 | VIU | | Video Post | | Video Encoders |<---|-----VCLK | + R |-------| |----| Processing | | | | | + | osd2 | | | |---| Enci ----------|----|-----VDAC------| + R |-------| CSC |----| Scalers | | Encp ----------|----|----HDMI-TX----| + A | osd1 | | | Blenders | | Encl ----------|----|---------------| + M |-------|______|----|____________| |________________| | | + ___|__________________________________________________________|_______________| + + + VIU: Video Input Unit + --------------------- + + The Video Input Unit is in charge of the pixel scanout from the DDR memory. + It fetches the frames addresses, stride and parameters from the "Canvas" memory. + This part is also in charge of the CSC (Colorspace Conversion). + It can handle 2 OSD Planes and 2 Video Planes. + + VPP: Video Post Processing + -------------------------- + + The Video Post Processing is in charge of the scaling and blending of the + various planes into a single pixel stream. + There is a special "pre-blending" used by the video planes with a dedicated + scaler and a "post-blending" to merge with the OSD Planes. + The OSD planes also have a dedicated scaler for one of the OSD. + + VENC: Video Encoders + -------------------- + + The VENC is composed of the multiple pixel encoders + - ENCI : Interlace Video encoder for CVBS and Interlace HDMI + - ENCP : Progressive Video Encoder for HDMI + - ENCL : LCD LVDS Encoder + The VENC Unit gets a Pixel Clocks (VCLK) from a dedicated HDMI PLL and clock + tree and provides the scanout clock to the VPP and VIU. + The ENCI is connected to a single VDAC for Composite Output. + The ENCI and ENCP are connected to an on-chip HDMI Transceiver. + +properties: + compatible: + oneOf: + - items: + - enum: + - amlogic,meson-gxbb-vpu # GXBB (S905) + - amlogic,meson-gxl-vpu # GXL (S905X, S905D) + - amlogic,meson-gxm-vpu # GXM (S912) + - const: amlogic,meson-gx-vpu + - enum: + - amlogic,meson-g12a-vpu # G12A (S905X2, S905Y2, S905D2) + + reg: + maxItems: 2 + + reg-names: + items: + - const: vpu + - const: hhi + + interrupts: + maxItems: 1 + + amlogic,canvas: + description: should point to a canvas provider node + $ref: /schemas/types.yaml#/definitions/phandle + + power-domains: + maxItems: 1 + description: phandle to the associated power domain + + port@0: + type: object + description: + A port node pointing to the CVBS VDAC port node. + + port@1: + type: object + description: + A port node pointing to the HDMI-TX port node. + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +required: + - compatible + - reg + - interrupts + - port@0 + - port@1 + - "#address-cells" + - "#size-cells" + - amlogic,canvas + +additionalProperties: false + +examples: + - | + vpu: vpu@d0100000 { + compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu"; + reg = <0xd0100000 0x100000>, <0xc883c000 0x1000>; + reg-names = "vpu", "hhi"; + interrupts = <3>; + #address-cells = <1>; + #size-cells = <0>; + amlogic,canvas = <&canvas>; + + /* CVBS VDAC output port */ + port@0 { + reg = <0>; + + cvbs_vdac_out: endpoint { + remote-endpoint = <&tv_connector_in>; + }; + }; + + /* HDMI TX output port */ + port@1 { + reg = <1>; + + hdmi_tx_out: endpoint { + remote-endpoint = <&hdmi_tx_in>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/arm,hdlcd.txt b/Documentation/devicetree/bindings/display/arm,hdlcd.txt new file mode 100644 index 000000000..78bc24296 --- /dev/null +++ b/Documentation/devicetree/bindings/display/arm,hdlcd.txt @@ -0,0 +1,79 @@ +ARM HDLCD + +This is a display controller found on several development platforms produced +by ARM Ltd and in more modern of its' Fast Models. The HDLCD is an RGB +streamer that reads the data from a framebuffer and sends it to a single +digital encoder (DVI or HDMI). + +Required properties: + - compatible: "arm,hdlcd" + - reg: Physical base address and length of the controller's registers. + - interrupts: One interrupt used by the display controller to notify the + interrupt controller when any of the interrupt sources programmed in + the interrupt mask register have activated. + - clocks: A list of phandle + clock-specifier pairs, one for each + entry in 'clock-names'. + - clock-names: A list of clock names. For HDLCD it should contain: + - "pxlclk" for the clock feeding the output PLL of the controller. + +Required sub-nodes: + - port: The HDLCD connection to an encoder chip. The connection is modeled + using the OF graph bindings specified in + Documentation/devicetree/bindings/graph.txt. + +Optional properties: + - memory-region: phandle to a node describing memory (see + Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt) to be + used for the framebuffer; if not present, the framebuffer may be located + anywhere in memory. + + +Example: + +/ { + ... + + hdlcd@2b000000 { + compatible = "arm,hdlcd"; + reg = <0 0x2b000000 0 0x1000>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&oscclk5>; + clock-names = "pxlclk"; + port { + hdlcd_output: endpoint@0 { + remote-endpoint = <&hdmi_enc_input>; + }; + }; + }; + + /* HDMI encoder on I2C bus */ + i2c@7ffa0000 { + .... + hdmi-transmitter@70 { + compatible = "....."; + reg = <0x70>; + port@0 { + hdmi_enc_input: endpoint { + remote-endpoint = <&hdlcd_output>; + }; + + hdmi_enc_output: endpoint { + remote-endpoint = <&hdmi_1_port>; + }; + }; + }; + + }; + + hdmi1: connector@1 { + compatible = "hdmi-connector"; + type = "a"; + port { + hdmi_1_port: endpoint { + remote-endpoint = <&hdmi_enc_output>; + }; + }; + }; + + ... +}; diff --git a/Documentation/devicetree/bindings/display/arm,komeda.txt b/Documentation/devicetree/bindings/display/arm,komeda.txt new file mode 100644 index 000000000..8513695ee --- /dev/null +++ b/Documentation/devicetree/bindings/display/arm,komeda.txt @@ -0,0 +1,78 @@ +Device Tree bindings for Arm Komeda display driver + +Required properties: +- compatible: Should be "arm,mali-d71" +- reg: Physical base address and length of the registers in the system +- interrupts: the interrupt line number of the device in the system +- clocks: A list of phandle + clock-specifier pairs, one for each entry + in 'clock-names' +- clock-names: A list of clock names. It should contain: + - "aclk": for the main processor clock +- #address-cells: Must be 1 +- #size-cells: Must be 0 +- iommus: configure the stream id to IOMMU, Must be configured if want to + enable iommu in display. for how to configure this node please reference + devicetree/bindings/iommu/arm,smmu-v3.txt, + devicetree/bindings/iommu/iommu.txt + +Required properties for sub-node: pipeline@nq +Each device contains one or two pipeline sub-nodes (at least one), each +pipeline node should provide properties: +- reg: Zero-indexed identifier for the pipeline +- clocks: A list of phandle + clock-specifier pairs, one for each entry + in 'clock-names' +- clock-names: should contain: + - "pxclk": pixel clock + +- port: each pipeline connect to an encoder input port. The connection is + modeled using the OF graph bindings specified in + Documentation/devicetree/bindings/graph.txt + +Optional properties: + - memory-region: phandle to a node describing memory (see + Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt) + to be used for the framebuffer; if not present, the framebuffer may + be located anywhere in memory. + +Example: +/ { + ... + + dp0: display@c00000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "arm,mali-d71"; + reg = <0xc00000 0x20000>; + interrupts = <0 168 4>; + clocks = <&dpu_aclk>; + clock-names = "aclk"; + iommus = <&smmu 0>, <&smmu 1>, <&smmu 2>, <&smmu 3>, + <&smmu 4>, <&smmu 5>, <&smmu 6>, <&smmu 7>, + <&smmu 8>, <&smmu 9>; + + dp0_pipe0: pipeline@0 { + clocks = <&fpgaosc2>; + clock-names = "pxclk"; + reg = <0>; + + port { + dp0_pipe0_out: endpoint { + remote-endpoint = <&db_dvi0_in>; + }; + }; + }; + + dp0_pipe1: pipeline@1 { + clocks = <&fpgaosc2>; + clock-names = "pxclk"; + reg = <1>; + + port { + dp0_pipe1_out: endpoint { + remote-endpoint = <&db_dvi1_in>; + }; + }; + }; + }; + ... +}; diff --git a/Documentation/devicetree/bindings/display/arm,malidp.txt b/Documentation/devicetree/bindings/display/arm,malidp.txt new file mode 100644 index 000000000..7a97a2b48 --- /dev/null +++ b/Documentation/devicetree/bindings/display/arm,malidp.txt @@ -0,0 +1,68 @@ +ARM Mali-DP + +The following bindings apply to a family of Display Processors sold as +licensable IP by ARM Ltd. The bindings describe the Mali DP500, DP550 and +DP650 processors that offer multiple composition layers, support for +rotation and scaling output. + +Required properties: + - compatible: should be one of + "arm,mali-dp500" + "arm,mali-dp550" + "arm,mali-dp650" + depending on the particular implementation present in the hardware + - reg: Physical base address and size of the block of registers used by + the processor. + - interrupts: Interrupt list, as defined in ../interrupt-controller/interrupts.txt, + interrupt client nodes. + - interrupt-names: name of the engine inside the processor that will + use the corresponding interrupt. Should be one of "DE" or "SE". + - clocks: A list of phandle + clock-specifier pairs, one for each entry + in 'clock-names' + - clock-names: A list of clock names. It should contain: + - "pclk": for the APB interface clock + - "aclk": for the AXI interface clock + - "mclk": for the main processor clock + - "pxlclk": for the pixel clock feeding the output PLL of the processor. + - arm,malidp-output-port-lines: Array of u8 values describing the number + of output lines per channel (R, G and B). + +Required sub-nodes: + - port: The Mali DP connection to an encoder input port. The connection + is modelled using the OF graph bindings specified in + Documentation/devicetree/bindings/graph.txt + +Optional properties: + - memory-region: phandle to a node describing memory (see + Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt) + to be used for the framebuffer; if not present, the framebuffer may + be located anywhere in memory. + - arm,malidp-arqos-high-level: integer of u32 value describing the ARQoS + levels of DP500's QoS signaling. + + +Example: + +/ { + ... + + dp0: malidp@6f200000 { + compatible = "arm,mali-dp650"; + reg = <0 0x6f200000 0 0x20000>; + memory-region = <&display_reserved>; + interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>, + <0 168 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "DE", "SE"; + clocks = <&oscclk2>, <&fpgaosc0>, <&fpgaosc1>, <&fpgaosc1>; + clock-names = "pxlclk", "mclk", "aclk", "pclk"; + arm,malidp-output-port-lines = /bits/ 8 <8 8 8>; + arm,malidp-arqos-high-level = <0xd000d000>; + port { + dp0_output: endpoint { + remote-endpoint = <&tda998x_2_input>; + }; + }; + }; + + ... +}; diff --git a/Documentation/devicetree/bindings/display/arm,pl11x.txt b/Documentation/devicetree/bindings/display/arm,pl11x.txt new file mode 100644 index 000000000..3f977e72a --- /dev/null +++ b/Documentation/devicetree/bindings/display/arm,pl11x.txt @@ -0,0 +1,110 @@ +* ARM PrimeCell Color LCD Controller PL110/PL111 + +See also Documentation/devicetree/bindings/arm/primecell.yaml + +Required properties: + +- compatible: must be one of: + "arm,pl110", "arm,primecell" + "arm,pl111", "arm,primecell" + +- reg: base address and size of the control registers block + +- interrupt-names: either the single entry "combined" representing a + combined interrupt output (CLCDINTR), or the four entries + "mbe", "vcomp", "lnbu", "fuf" representing the individual + CLCDMBEINTR, CLCDVCOMPINTR, CLCDLNBUINTR, CLCDFUFINTR interrupts + +- interrupts: contains an interrupt specifier for each entry in + interrupt-names + +- clock-names: should contain "clcdclk" and "apb_pclk" + +- clocks: contains phandle and clock specifier pairs for the entries + in the clock-names property. See + Documentation/devicetree/bindings/clock/clock-bindings.txt + +Optional properties: + +- memory-region: phandle to a node describing memory (see + Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt) + to be used for the framebuffer; if not present, the framebuffer + may be located anywhere in the memory + +- max-memory-bandwidth: maximum bandwidth in bytes per second that the + cell's memory interface can handle; if not present, the memory + interface is fast enough to handle all possible video modes + +Required sub-nodes: + +- port: describes LCD panel signals, following the common binding + for video transmitter interfaces; see + Documentation/devicetree/bindings/media/video-interfaces.txt + +Deprecated properties: + The port's endbpoint subnode had this, now deprecated property + in the past. Drivers should be able to survive without it: + + - arm,pl11x,tft-r0g0b0-pads: an array of three 32-bit values, + defining the way CLD pads are wired up; first value + contains index of the "CLD" external pin (pad) used + as R0 (first bit of the red component), second value + index of the pad used as G0, third value index of the + pad used as B0, see also "LCD panel signal multiplexing + details" paragraphs in the PL110/PL111 Technical + Reference Manuals; this implicitly defines available + color modes, for example: + - PL111 TFT 4:4:4 panel: + arm,pl11x,tft-r0g0b0-pads = <4 15 20>; + - PL110 TFT (1:)5:5:5 panel: + arm,pl11x,tft-r0g0b0-pads = <1 7 13>; + - PL111 TFT (1:)5:5:5 panel: + arm,pl11x,tft-r0g0b0-pads = <3 11 19>; + - PL111 TFT 5:6:5 panel: + arm,pl11x,tft-r0g0b0-pads = <3 10 19>; + - PL110 and PL111 TFT 8:8:8 panel: + arm,pl11x,tft-r0g0b0-pads = <0 8 16>; + - PL110 and PL111 TFT 8:8:8 panel, R & B components swapped: + arm,pl11x,tft-r0g0b0-pads = <16 8 0>; + + +Example: + + clcd@10020000 { + compatible = "arm,pl111", "arm,primecell"; + reg = <0x10020000 0x1000>; + interrupt-names = "combined"; + interrupts = <0 44 4>; + clocks = <&oscclk1>, <&oscclk2>; + clock-names = "clcdclk", "apb_pclk"; + max-memory-bandwidth = <94371840>; /* Bps, 1024x768@60 16bpp */ + + port { + clcd_pads: endpoint { + remote-endpoint = <&clcd_panel>; + }; + }; + + }; + + panel { + compatible = "panel-dpi"; + + port { + clcd_panel: endpoint { + remote-endpoint = <&clcd_pads>; + }; + }; + + panel-timing { + clock-frequency = <25175000>; + hactive = <640>; + hback-porch = <40>; + hfront-porch = <24>; + hsync-len = <96>; + vactive = <480>; + vback-porch = <32>; + vfront-porch = <11>; + vsync-len = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/display/armada/marvell,dove-lcd.txt b/Documentation/devicetree/bindings/display/armada/marvell,dove-lcd.txt new file mode 100644 index 000000000..46525ea3e --- /dev/null +++ b/Documentation/devicetree/bindings/display/armada/marvell,dove-lcd.txt @@ -0,0 +1,30 @@ +Device Tree bindings for Armada DRM CRTC driver + +Required properties: + - compatible: value should be "marvell,dove-lcd". + - reg: base address and size of the LCD controller + - interrupts: single interrupt number for the LCD controller + - port: video output port with endpoints, as described by graph.txt + +Optional properties: + + - clocks: as described by clock-bindings.txt + - clock-names: as described by clock-bindings.txt + "axiclk" - axi bus clock for pixel clock + "plldivider" - pll divider clock for pixel clock + "ext_ref_clk0" - external clock 0 for pixel clock + "ext_ref_clk1" - external clock 1 for pixel clock + +Note: all clocks are optional but at least one must be specified. +Further clocks may be added in the future according to requirements of +different SoCs. + +Example: + + lcd0: lcd-controller@820000 { + compatible = "marvell,dove-lcd"; + reg = <0x820000 0x1000>; + interrupts = <47>; + clocks = <&si5351 0>; + clock-names = "ext_ref_clk_1"; + }; diff --git a/Documentation/devicetree/bindings/display/atmel,lcdc.txt b/Documentation/devicetree/bindings/display/atmel,lcdc.txt new file mode 100644 index 000000000..acb5a0132 --- /dev/null +++ b/Documentation/devicetree/bindings/display/atmel,lcdc.txt @@ -0,0 +1,88 @@ +Atmel LCDC Framebuffer +----------------------------------------------------- + +Required properties: +- compatible : + "atmel,at91sam9261-lcdc" , + "atmel,at91sam9263-lcdc" , + "atmel,at91sam9g10-lcdc" , + "atmel,at91sam9g45-lcdc" , + "atmel,at91sam9g45es-lcdc" , + "atmel,at91sam9rl-lcdc" , + "atmel,at32ap-lcdc" +- reg : Should contain 1 register ranges(address and length). + Can contain an additional register range(address and length) + for fixed framebuffer memory. Useful for dedicated memories. +- interrupts : framebuffer controller interrupt +- display: a phandle pointing to the display node + +Required nodes: +- display: a display node is required to initialize the lcd panel + This should be in the board dts. +- default-mode: a videomode within the display with timing parameters + as specified below. + +Optional properties: +- lcd-supply: Regulator for LCD supply voltage. + +Example: + + fb0: fb@00500000 { + compatible = "atmel,at91sam9g45-lcdc"; + reg = <0x00500000 0x1000>; + interrupts = <23 3 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fb>; + display = <&display0>; + #address-cells = <1>; + #size-cells = <1>; + + }; + +Example for fixed framebuffer memory: + + fb0: fb@00500000 { + compatible = "atmel,at91sam9263-lcdc"; + reg = <0x00700000 0x1000 0x70000000 0x200000>; + [...] + }; + +Atmel LCDC Display +----------------------------------------------------- +Required properties (as per of_videomode_helper): + + - atmel,dmacon: dma controller configuration + - atmel,lcdcon2: lcd controller configuration + - atmel,guard-time: lcd guard time (Delay in frame periods) + - bits-per-pixel: lcd panel bit-depth. + +Optional properties (as per of_videomode_helper): + - atmel,lcdcon-backlight: enable backlight + - atmel,lcdcon-backlight-inverted: invert backlight PWM polarity + - atmel,lcd-wiring-mode: lcd wiring mode "RGB" or "BRG" + - atmel,power-control-gpio: gpio to power on or off the LCD (as many as needed) + +Example: + display0: display { + bits-per-pixel = <32>; + atmel,lcdcon-backlight; + atmel,dmacon = <0x1>; + atmel,lcdcon2 = <0x80008002>; + atmel,guard-time = <9>; + atmel,lcd-wiring-mode = <1>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <9000000>; + hactive = <480>; + vactive = <272>; + hback-porch = <1>; + hfront-porch = <1>; + vback-porch = <40>; + vfront-porch = <1>; + hsync-len = <45>; + vsync-len = <1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt b/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt new file mode 100644 index 000000000..0398aec48 --- /dev/null +++ b/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt @@ -0,0 +1,75 @@ +Device-Tree bindings for Atmel's HLCDC (High LCD Controller) DRM driver + +The Atmel HLCDC Display Controller is subdevice of the HLCDC MFD device. +See ../../mfd/atmel-hlcdc.txt for more details. + +Required properties: + - compatible: value should be "atmel,hlcdc-display-controller" + - pinctrl-names: the pin control state names. Should contain "default". + - pinctrl-0: should contain the default pinctrl states. + - #address-cells: should be set to 1. + - #size-cells: should be set to 0. + +Required children nodes: + Children nodes are encoding available output ports and their connections + to external devices using the OF graph reprensentation (see ../graph.txt). + At least one port node is required. + +Optional properties in grandchild nodes: + Any endpoint grandchild node may specify a desired video interface + according to ../../media/video-interfaces.txt, specifically + - bus-width: recognized values are <12>, <16>, <18> and <24>, and + override any output mode selection heuristic, forcing "rgb444", + "rgb565", "rgb666" and "rgb888" respectively. + +Example: + + hlcdc: hlcdc@f0030000 { + compatible = "atmel,sama5d3-hlcdc"; + reg = <0xf0030000 0x2000>; + interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>; + clock-names = "periph_clk","sys_clk", "slow_clk"; + + hlcdc-display-controller { + compatible = "atmel,hlcdc-display-controller"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + hlcdc_panel_output: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_input>; + }; + }; + }; + + hlcdc_pwm: hlcdc-pwm { + compatible = "atmel,hlcdc-pwm"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_pwm>; + #pwm-cells = <3>; + }; + }; + +Example 2: With a video interface override to force rgb565; as above +but with these changes/additions: + + &hlcdc { + hlcdc-display-controller { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb565>; + + port@0 { + hlcdc_panel_output: endpoint@0 { + bus-width = <16>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml new file mode 100644 index 000000000..7ce06f9f9 --- /dev/null +++ b/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml @@ -0,0 +1,123 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/brcm,bcm2711-hdmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM2711 HDMI Controller Device Tree Bindings + +maintainers: + - Eric Anholt <eric@anholt.net> + +properties: + compatible: + enum: + - brcm,bcm2711-hdmi0 + - brcm,bcm2711-hdmi1 + + reg: + items: + - description: HDMI controller register range + - description: DVP register range + - description: HDMI PHY register range + - description: Rate Manager register range + - description: Packet RAM register range + - description: Metadata RAM register range + - description: CSC register range + - description: CEC register range + - description: HD register range + + reg-names: + items: + - const: hdmi + - const: dvp + - const: phy + - const: rm + - const: packet + - const: metadata + - const: csc + - const: cec + - const: hd + + clocks: + items: + - description: The HDMI state machine clock + - description: The Pixel BVB clock + - description: The HDMI Audio parent clock + - description: The HDMI CEC parent clock + + clock-names: + items: + - const: hdmi + - const: bvb + - const: audio + - const: cec + + ddc: + allOf: + - $ref: /schemas/types.yaml#/definitions/phandle + description: > + Phandle of the I2C controller used for DDC EDID probing + + hpd-gpios: + description: > + The GPIO pin for the HDMI hotplug detect (if it doesn't appear + as an interrupt/status bit in the HDMI controller itself) + + dmas: + maxItems: 1 + description: > + Should contain one entry pointing to the DMA channel used to + transfer audio data. + + dma-names: + const: audio-rx + + resets: + maxItems: 1 + + wifi-2.4ghz-coexistence: + type: boolean + description: > + Should the pixel frequencies in the WiFi frequencies range be + avoided? + +required: + - compatible + - reg + - reg-names + - clocks + - resets + - ddc + +additionalProperties: false + +examples: + - | + hdmi0: hdmi@7ef00700 { + compatible = "brcm,bcm2711-hdmi0"; + reg = <0x7ef00700 0x300>, + <0x7ef00300 0x200>, + <0x7ef00f00 0x80>, + <0x7ef00f80 0x80>, + <0x7ef01b00 0x200>, + <0x7ef01f00 0x400>, + <0x7ef00200 0x80>, + <0x7ef04300 0x100>, + <0x7ef20000 0x100>; + reg-names = "hdmi", + "dvp", + "phy", + "rm", + "packet", + "metadata", + "csc", + "cec", + "hd"; + clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>; + clock-names = "hdmi", "bvb", "audio", "cec"; + resets = <&dvp 0>; + ddc = <&ddc0>; + }; + +... diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-dpi.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-dpi.yaml new file mode 100644 index 000000000..5c1024bbc --- /dev/null +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-dpi.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/brcm,bcm2835-dpi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom VC4 (VideoCore4) DPI Controller + +maintainers: + - Eric Anholt <eric@anholt.net> + +properties: + compatible: + const: brcm,bcm2835-dpi + + reg: + maxItems: 1 + + clocks: + items: + - description: The core clock the unit runs on + - description: The pixel clock that feeds the pixelvalve + + clock-names: + items: + - const: core + - const: pixel + + port: + type: object + description: > + Port node with a single endpoint connecting to the panel, as + defined in Documentation/devicetree/bindings/media/video-interfaces.txt. + +required: + - compatible + - reg + - clocks + - clock-names + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/bcm2835.h> + + dpi: dpi@7e208000 { + compatible = "brcm,bcm2835-dpi"; + reg = <0x7e208000 0x8c>; + clocks = <&clocks BCM2835_CLOCK_VPU>, + <&clocks BCM2835_CLOCK_DPI>; + clock-names = "core", "pixel"; + + port { + dpi_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml new file mode 100644 index 000000000..eb44e072b --- /dev/null +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/brcm,bcm2835-dsi0.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom VC4 (VideoCore4) DSI Controller + +maintainers: + - Eric Anholt <eric@anholt.net> + +allOf: + - $ref: dsi-controller.yaml# + +properties: + "#clock-cells": + const: 1 + + compatible: + enum: + - brcm,bcm2835-dsi0 + - brcm,bcm2835-dsi1 + + reg: + maxItems: 1 + + clocks: + items: + - description: The DSI PLL clock feeding the DSI analog PHY + - description: The DSI ESC clock + - description: The DSI pixel clock + + clock-names: + items: + - const: phy + - const: escape + - const: pixel + + clock-output-names: true + # FIXME: The meta-schemas don't seem to allow it for now + # items: + # - description: The DSI byte clock for the PHY + # - description: The DSI DDR2 clock + # - description: The DSI DDR clock + + interrupts: + maxItems: 1 + +required: + - "#clock-cells" + - compatible + - reg + - clocks + - clock-names + - clock-output-names + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/bcm2835.h> + + dsi1: dsi@7e700000 { + compatible = "brcm,bcm2835-dsi1"; + reg = <0x7e700000 0x8c>; + interrupts = <2 12>; + #address-cells = <1>; + #size-cells = <0>; + #clock-cells = <1>; + + clocks = <&clocks BCM2835_PLLD_DSI1>, + <&clocks BCM2835_CLOCK_DSI1E>, + <&clocks BCM2835_CLOCK_DSI1P>; + clock-names = "phy", "escape", "pixel"; + + clock-output-names = "dsi1_byte", "dsi1_ddr2", "dsi1_ddr"; + + pitouchscreen: panel@0 { + compatible = "raspberrypi,touchscreen"; + reg = <0>; + + /* ... */ + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml new file mode 100644 index 000000000..f54b4e480 --- /dev/null +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/brcm,bcm2835-hdmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom VC4 (VideoCore4) HDMI Controller + +maintainers: + - Eric Anholt <eric@anholt.net> + +properties: + compatible: + const: brcm,bcm2835-hdmi + + reg: + items: + - description: HDMI register range + - description: HD register range + + interrupts: + minItems: 2 + + clocks: + items: + - description: The pixel clock + - description: The HDMI state machine clock + + clock-names: + items: + - const: pixel + - const: hdmi + + ddc: + $ref: /schemas/types.yaml#/definitions/phandle + description: > + Phandle of the I2C controller used for DDC EDID probing + + hpd-gpios: + description: > + The GPIO pin for the HDMI hotplug detect (if it doesn't appear + as an interrupt/status bit in the HDMI controller itself) + + dmas: + maxItems: 1 + description: > + Should contain one entry pointing to the DMA channel used to + transfer audio data. + + dma-names: + const: audio-rx + +required: + - compatible + - reg + - interrupts + - clocks + - ddc + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/bcm2835.h> + #include <dt-bindings/gpio/gpio.h> + + hdmi: hdmi@7e902000 { + compatible = "brcm,bcm2835-hdmi"; + reg = <0x7e902000 0x600>, + <0x7e808000 0x100>; + interrupts = <2 8>, <2 9>; + ddc = <&i2c2>; + hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>; + clocks = <&clocks BCM2835_PLLH_PIX>, + <&clocks BCM2835_CLOCK_HSM>; + clock-names = "pixel", "hdmi"; + }; + +... diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml new file mode 100644 index 000000000..e826ab0ad --- /dev/null +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/brcm,bcm2835-hvs.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom VC4 (VideoCore4) Hardware Video Scaler + +maintainers: + - Eric Anholt <eric@anholt.net> + +properties: + compatible: + enum: + - brcm,bcm2711-hvs + - brcm,bcm2835-hvs + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + description: Core Clock + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +if: + properties: + compatible: + contains: + const: brcm,bcm2711-hvs" + +then: + required: + - clocks + +examples: + - | + hvs@7e400000 { + compatible = "brcm,bcm2835-hvs"; + reg = <0x7e400000 0x6000>; + interrupts = <2 1>; + }; + +... diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-pixelvalve0.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-pixelvalve0.yaml new file mode 100644 index 000000000..4e1ba03f6 --- /dev/null +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-pixelvalve0.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/brcm,bcm2835-pixelvalve0.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom VC4 (VideoCore4) PixelValve + +maintainers: + - Eric Anholt <eric@anholt.net> + +properties: + compatible: + enum: + - brcm,bcm2835-pixelvalve0 + - brcm,bcm2835-pixelvalve1 + - brcm,bcm2835-pixelvalve2 + - brcm,bcm2711-pixelvalve0 + - brcm,bcm2711-pixelvalve1 + - brcm,bcm2711-pixelvalve2 + - brcm,bcm2711-pixelvalve3 + - brcm,bcm2711-pixelvalve4 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + pixelvalve@7e807000 { + compatible = "brcm,bcm2835-pixelvalve2"; + reg = <0x7e807000 0x100>; + interrupts = <2 10>; /* pixelvalve */ + }; + +... diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-txp.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-txp.yaml new file mode 100644 index 000000000..bb186197e --- /dev/null +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-txp.yaml @@ -0,0 +1,37 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/brcm,bcm2835-txp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom VC4 (VideoCore4) TXP (writeback) Controller + +maintainers: + - Eric Anholt <eric@anholt.net> + +properties: + compatible: + const: brcm,bcm2835-txp + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + txp: txp@7e004000 { + compatible = "brcm,bcm2835-txp"; + reg = <0x7e004000 0x20>; + interrupts = <1 11>; + }; + +... diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-v3d.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-v3d.yaml new file mode 100644 index 000000000..8a73780f5 --- /dev/null +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-v3d.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/brcm,bcm2835-v3d.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom VC4 (VideoCore4) V3D GPU + +maintainers: + - Eric Anholt <eric@anholt.net> + +properties: + compatible: + enum: + - brcm,bcm2835-v3d + - brcm,cygnus-v3d + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + v3d: v3d@7ec00000 { + compatible = "brcm,bcm2835-v3d"; + reg = <0x7ec00000 0x1000>; + interrupts = <1 10>; + }; + +... diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-vc4.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-vc4.yaml new file mode 100644 index 000000000..49a5e041a --- /dev/null +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-vc4.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/brcm,bcm2835-vc4.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom VC4 (VideoCore4) GPU + +maintainers: + - Eric Anholt <eric@anholt.net> + +description: > + The VC4 device present on the Raspberry Pi includes a display system + with HDMI output and the HVS (Hardware Video Scaler) for compositing + display planes. + +properties: + compatible: + enum: + - brcm,bcm2711-vc5 + - brcm,bcm2835-vc4 + - brcm,cygnus-vc4 + +required: + - compatible + +additionalProperties: false + +examples: + - | + vc4: gpu { + compatible = "brcm,bcm2835-vc4"; + }; + +... diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-vec.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-vec.yaml new file mode 100644 index 000000000..d900cc57b --- /dev/null +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-vec.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/brcm,bcm2835-vec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom VC4 (VideoCore4) VEC + +maintainers: + - Eric Anholt <eric@anholt.net> + +properties: + compatible: + const: brcm,bcm2835-vec + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/bcm2835.h> + + vec: vec@7e806000 { + compatible = "brcm,bcm2835-vec"; + reg = <0x7e806000 0x1000>; + clocks = <&clocks BCM2835_CLOCK_VEC>; + interrupts = <2 27>; + }; + +... diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt new file mode 100644 index 000000000..659523f53 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt @@ -0,0 +1,143 @@ +Analog Devices ADV7511(W)/13/33/35 HDMI Encoders +------------------------------------------------ + +The ADV7511, ADV7511W, ADV7513, ADV7533 and ADV7535 are HDMI audio and video +transmitters compatible with HDMI 1.4 and DVI 1.0. They support color space +conversion, S/PDIF, CEC and HDCP. ADV7533/5 supports the DSI interface for input +pixels, while the others support RGB interface. + +Required properties: + +- compatible: Should be one of: + "adi,adv7511" + "adi,adv7511w" + "adi,adv7513" + "adi,adv7533" + "adi,adv7535" + +- reg: I2C slave addresses + The ADV7511 internal registers are split into four pages exposed through + different I2C addresses, creating four register maps. Each map has it own + I2C address and acts as a standard slave device on the I2C bus. The main + address is mandatory, others are optional and revert to defaults if not + specified. + + +The ADV7511 supports a large number of input data formats that differ by their +color depth, color format, clock mode, bit justification and random +arrangement of components on the data bus. The combination of the following +properties describe the input and map directly to the video input tables of the +ADV7511 datasheet that document all the supported combinations. + +- adi,input-depth: Number of bits per color component at the input (8, 10 or + 12). +- adi,input-colorspace: The input color space, one of "rgb", "yuv422" or + "yuv444". +- adi,input-clock: The input clock type, one of "1x" (one clock cycle per + pixel), "2x" (two clock cycles per pixel), "ddr" (one clock cycle per pixel, + data driven on both edges). + +The following input format properties are required except in "rgb 1x" and +"yuv444 1x" modes, in which case they must not be specified. + +- adi,input-style: The input components arrangement variant (1, 2 or 3), as + listed in the input format tables in the datasheet. +- adi,input-justification: The input bit justification ("left", "evenly", + "right"). + +- avdd-supply: A 1.8V supply that powers up the AVDD pin on the chip. +- dvdd-supply: A 1.8V supply that powers up the DVDD pin on the chip. +- pvdd-supply: A 1.8V supply that powers up the PVDD pin on the chip. +- dvdd-3v-supply: A 3.3V supply that powers up the pin called DVDD_3V + on the chip. +- bgvdd-supply: A 1.8V supply that powers up the BGVDD pin. This is + needed only for ADV7511. + +The following properties are required for ADV7533 and ADV7535: + +- adi,dsi-lanes: Number of DSI data lanes connected to the DSI host. It should + be one of 1, 2, 3 or 4. +- a2vdd-supply: 1.8V supply that powers up the A2VDD pin on the chip. +- v3p3-supply: A 3.3V supply that powers up the V3P3 pin on the chip. +- v1p2-supply: A supply that powers up the V1P2 pin on the chip. It can be + either 1.2V or 1.8V for ADV7533 but only 1.8V for ADV7535. + +Optional properties: + +- interrupts: Specifier for the ADV7511 interrupt +- pd-gpios: Specifier for the GPIO connected to the power down signal + +- adi,clock-delay: Video data clock delay relative to the pixel clock, in ps + (-1200 ps .. 1600 ps). Defaults to no delay. +- adi,embedded-sync: The input uses synchronization signals embedded in the + data stream (similar to BT.656). Defaults to separate H/V synchronization + signals. +- adi,disable-timing-generator: Only for ADV7533 and ADV7535. Disables the + internal timing generator. The chip will rely on the sync signals in the + DSI data lanes, rather than generate its own timings for HDMI output. +- clocks: from common clock binding: reference to the CEC clock. +- clock-names: from common clock binding: must be "cec". +- reg-names : Names of maps with programmable addresses. + It can contain any map needing a non-default address. + Possible maps names are : "main", "edid", "cec", "packet" + +Required nodes: + +The ADV7511 has two video ports. Their connections are modelled using the OF +graph bindings specified in Documentation/devicetree/bindings/graph.txt. + +- Video port 0 for the RGB, YUV or DSI input. In the case of ADV7533/5, the + remote endpoint phandle should be a reference to a valid mipi_dsi_host device + node. +- Video port 1 for the HDMI output +- Audio port 2 for the HDMI audio input + + +Example +------- + + adv7511w: hdmi@39 { + compatible = "adi,adv7511w"; + /* + * The EDID page will be accessible on address 0x66 on the I2C + * bus. All other maps continue to use their default addresses. + */ + reg = <0x39>, <0x66>; + reg-names = "main", "edid"; + interrupt-parent = <&gpio3>; + interrupts = <29 IRQ_TYPE_EDGE_FALLING>; + clocks = <&cec_clock>; + clock-names = "cec"; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + adi,input-style = <1>; + adi,input-justification = "evenly"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7511w_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + + port@1 { + reg = <1>; + adv7511_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + + port@2 { + reg = <2>; + codec_endpoint: endpoint { + remote-endpoint = <&i2s0_cpu_endpoint>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml new file mode 100644 index 000000000..3ba477aef --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml @@ -0,0 +1,119 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/analogix,anx7814.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analogix ANX7814 SlimPort (Full-HD Transmitter) + +maintainers: + - Enric Balletbo i Serra <enric.balletbo@collabora.com> + +properties: + compatible: + enum: + - analogix,anx7808 + - analogix,anx7812 + - analogix,anx7814 + - analogix,anx7818 + + reg: + maxItems: 1 + description: I2C address of the device. + + interrupts: + maxItems: 1 + description: Should contain the INTP interrupt. + + hpd-gpios: + deprecated: true + maxItems: 1 + description: Which GPIO to use for hpd. + + pd-gpios: + maxItems: 1 + description: Which GPIO to use for power down. + + reset-gpios: + maxItems: 1 + description: Which GPIO to use for reset. + + dvdd10-supply: + description: Regulator for 1.0V digital core power. + + ports: + type: object + description: + A node containing input and output port nodes with endpoint + definitions as documented in + Documentation/devicetree/bindings/media/video-interfaces.txt + Documentation/devicetree/bindings/graph.txt + + properties: + port@0: + type: object + description: Video port for HDMI input. + + properties: + reg: + const: 0 + + port@1: + type: object + description: + Video port for SlimPort, DisplayPort, eDP or MyDP output. + + properties: + reg: + const: 1 + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + anx7814: bridge@38 { + compatible = "analogix,anx7814"; + reg = <0x38>; + interrupt-parent = <&gpio0>; + interrupts = <99 IRQ_TYPE_LEVEL_LOW>; /* INTP */ + pd-gpios = <&pio 33 GPIO_ACTIVE_HIGH>; + reset-gpios = <&pio 98 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + anx7814_in: endpoint { + remote-endpoint = <&hdmi0_out>; + }; + }; + + port@1 { + reg = <1>; + anx7814_out: endpoint { + remote-endpoint = <&edp_out>; + }; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt new file mode 100644 index 000000000..027d76c27 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt @@ -0,0 +1,51 @@ +Analogix Display Port bridge bindings + +Required properties for dp-controller: + -compatible: + platform specific such as: + * "samsung,exynos5-dp" + * "rockchip,rk3288-dp" + * "rockchip,rk3399-edp" + -reg: + physical base address of the controller and length + of memory mapped region. + -interrupts: + interrupt combiner values. + -clocks: + from common clock binding: handle to dp clock. + -clock-names: + from common clock binding: Shall be "dp". + -phys: + from general PHY binding: the phandle for the PHY device. + -phy-names: + from general PHY binding: Should be "dp". + +Optional properties for dp-controller: + -force-hpd: + Indicate driver need force hpd when hpd detect failed, this + is used for some eDP screen which don't have hpd signal. + -hpd-gpios: + Hotplug detect GPIO. + Indicates which GPIO should be used for hotplug detection + -port@[X]: SoC specific port nodes with endpoint definitions as defined + in Documentation/devicetree/bindings/media/video-interfaces.txt, + please refer to the SoC specific binding document: + * Documentation/devicetree/bindings/display/exynos/exynos_dp.txt + * Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt + +[1]: Documentation/devicetree/bindings/media/video-interfaces.txt +------------------------------------------------------------------------------- + +Example: + + dp-controller { + compatible = "samsung,exynos5-dp"; + reg = <0x145b0000 0x10000>; + interrupts = <10 3>; + interrupt-parent = <&combiner>; + clocks = <&clock 342>; + clock-names = "dp"; + + phys = <&dp_phy>; + phy-names = "dp"; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/anx6345.yaml b/Documentation/devicetree/bindings/display/bridge/anx6345.yaml new file mode 100644 index 000000000..8c0e4f285 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/anx6345.yaml @@ -0,0 +1,104 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/anx6345.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analogix ANX6345 eDP Transmitter Device Tree Bindings + +maintainers: + - Torsten Duwe <duwe@lst.de> + +description: | + The ANX6345 is an ultra-low power Full-HD eDP transmitter designed for + portable devices. + +properties: + compatible: + const: analogix,anx6345 + + reg: + maxItems: 1 + description: base I2C address of the device + + reset-gpios: + maxItems: 1 + description: GPIO connected to active low reset + + dvdd12-supply: + maxItems: 1 + description: Regulator for 1.2V digital core power. + + dvdd25-supply: + maxItems: 1 + description: Regulator for 2.5V digital core power. + + ports: + type: object + + properties: + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + port@0: + type: object + description: | + Video port for LVTTL input + + port@1: + type: object + description: | + Video port for eDP output (panel or connector). + May be omitted if EDID works reliably. + + required: + - port@0 + + additionalProperties: false + +required: + - compatible + - reg + - reset-gpios + - dvdd12-supply + - dvdd25-supply + - ports + +additionalProperties: false + +examples: + - | + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + anx6345: anx6345@38 { + compatible = "analogix,anx6345"; + reg = <0x38>; + reset-gpios = <&pio42 1 /* GPIO_ACTIVE_LOW */>; + dvdd25-supply = <®_dldo2>; + dvdd12-supply = <®_fldo1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + anx6345_in: port@0 { + reg = <0>; + anx6345_in_tcon0: endpoint { + remote-endpoint = <&tcon0_out_anx6345>; + }; + }; + + anx6345_out: port@1 { + reg = <1>; + anx6345_out_panel: endpoint { + remote-endpoint = <&panel_in_edp>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt b/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt new file mode 100644 index 000000000..525a4bfd8 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt @@ -0,0 +1,112 @@ +Cadence DSI bridge +================== + +The Cadence DSI bridge is a DPI to DSI bridge supporting up to 4 DSI lanes. + +Required properties: +- compatible: should be set to "cdns,dsi". +- reg: physical base address and length of the controller's registers. +- interrupts: interrupt line connected to the DSI bridge. +- clocks: DSI bridge clocks. +- clock-names: must contain "dsi_p_clk" and "dsi_sys_clk". +- phys: phandle link to the MIPI D-PHY controller. +- phy-names: must contain "dphy". +- #address-cells: must be set to 1. +- #size-cells: must be set to 0. + +Optional properties: +- resets: DSI reset lines. +- reset-names: can contain "dsi_p_rst". + +Required subnodes: +- ports: Ports as described in Documentation/devicetree/bindings/graph.txt. + 2 ports are available: + * port 0: this port is only needed if some of your DSI devices are + controlled through an external bus like I2C or SPI. Can have at + most 4 endpoints. The endpoint number is directly encoding the + DSI virtual channel used by this device. + * port 1: represents the DPI input. + Other ports will be added later to support the new kind of inputs. + +- one subnode per DSI device connected on the DSI bus. Each DSI device should + contain a reg property encoding its virtual channel. + +Example: + dsi0: dsi@fd0c0000 { + compatible = "cdns,dsi"; + reg = <0x0 0xfd0c0000 0x0 0x1000>; + clocks = <&pclk>, <&sysclk>; + clock-names = "dsi_p_clk", "dsi_sys_clk"; + interrupts = <1>; + phys = <&dphy0>; + phy-names = "dphy"; + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + dsi0_dpi_input: endpoint { + remote-endpoint = <&xxx_dpi_output>; + }; + }; + }; + + panel: dsi-dev@0 { + compatible = "<vendor,panel>"; + reg = <0>; + }; + }; + +or + + dsi0: dsi@fd0c0000 { + compatible = "cdns,dsi"; + reg = <0x0 0xfd0c0000 0x0 0x1000>; + clocks = <&pclk>, <&sysclk>; + clock-names = "dsi_p_clk", "dsi_sys_clk"; + interrupts = <1>; + phys = <&dphy1>; + phy-names = "dphy"; + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + dsi0_output: endpoint@0 { + reg = <0>; + remote-endpoint = <&dsi_panel_input>; + }; + }; + + port@1 { + reg = <1>; + dsi0_dpi_input: endpoint { + remote-endpoint = <&xxx_dpi_output>; + }; + }; + }; + }; + + i2c@xxx { + panel: panel@59 { + compatible = "<vendor,panel>"; + reg = <0x59>; + + port { + dsi_panel_input: endpoint { + remote-endpoint = <&dsi0_output>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml new file mode 100644 index 000000000..74d675fc6 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml @@ -0,0 +1,169 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/display/bridge/cdns,mhdp8546.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Cadence MHDP8546 bridge + +maintainers: + - Swapnil Jakhade <sjakhade@cadence.com> + - Yuti Amonkar <yamonkar@cadence.com> + +properties: + compatible: + enum: + - cdns,mhdp8546 + - ti,j721e-mhdp8546 + + reg: + minItems: 1 + maxItems: 2 + items: + - description: + Register block of mhdptx apb registers up to PHY mapped area (AUX_CONFIG_P). + The AUX and PMA registers are not part of this range, they are instead + included in the associated PHY. + - description: + Register block for DSS_EDP0_INTG_CFG_VP registers in case of TI J7 SoCs. + + reg-names: + minItems: 1 + maxItems: 2 + items: + - const: mhdptx + - const: j721e-intg + + clocks: + maxItems: 1 + description: + DP bridge clock, used by the IP to know how to translate a number of + clock cycles into a time (which is used to comply with DP standard timings + and delays). + + phys: + maxItems: 1 + description: + phandle to the DisplayPort PHY. + + phy-names: + items: + - const: dpphy + + power-domains: + maxItems: 1 + + interrupts: + maxItems: 1 + + ports: + type: object + description: + Ports as described in Documentation/devicetree/bindings/graph.txt. + + properties: + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + port@0: + type: object + description: + First input port representing the DP bridge input. + + port@1: + type: object + description: + Second input port representing the DP bridge input. + + port@2: + type: object + description: + Third input port representing the DP bridge input. + + port@3: + type: object + description: + Fourth input port representing the DP bridge input. + + port@4: + type: object + description: + Output port representing the DP bridge output. + + required: + - port@0 + - port@4 + - '#address-cells' + - '#size-cells' + +allOf: + - if: + properties: + compatible: + contains: + const: ti,j721e-mhdp8546 + then: + properties: + reg: + minItems: 2 + reg-names: + minItems: 2 + else: + properties: + reg: + maxItems: 1 + reg-names: + maxItems: 1 + +required: + - compatible + - clocks + - reg + - reg-names + - phys + - phy-names + - interrupts + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + bus { + #address-cells = <2>; + #size-cells = <2>; + + mhdp: dp-bridge@f0fb000000 { + compatible = "cdns,mhdp8546"; + reg = <0xf0 0xfb000000 0x0 0x1000000>; + reg-names = "mhdptx"; + clocks = <&mhdp_clock>; + phys = <&dp_phy>; + phy-names = "dpphy"; + interrupts = <GIC_SPI 614 IRQ_TYPE_LEVEL_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dp_bridge_input: endpoint { + remote-endpoint = <&xxx_dpi_output>; + }; + }; + + port@4 { + reg = <4>; + dp_bridge_output: endpoint { + remote-endpoint = <&xxx_dp_connector_input>; + }; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/bridge/chrontel,ch7033.yaml b/Documentation/devicetree/bindings/display/bridge/chrontel,ch7033.yaml new file mode 100644 index 000000000..9f38f55fc --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/chrontel,ch7033.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2019,2020 Lubomir Rintel <lkundrak@v3.sk> +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/chrontel,ch7033.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Chrontel CH7033 Video Encoder Device Tree Bindings + +maintainers: + - Lubomir Rintel <lkundrak@v3.sk> + +properties: + compatible: + const: chrontel,ch7033 + + reg: + maxItems: 1 + description: I2C address of the device + + ports: + type: object + + properties: + port@0: + type: object + description: | + Video port for RGB input. + + port@1: + type: object + description: | + DVI port, should be connected to a node compatible with the + dvi-connector binding. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - ports + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + vga-dvi-encoder@76 { + compatible = "chrontel,ch7033"; + reg = <0x76>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&lcd0_rgb_out>; + }; + }; + + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&dvi_in>; + }; + }; + + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt b/Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt new file mode 100644 index 000000000..33bf981fb --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt @@ -0,0 +1,33 @@ +Synopsys DesignWare HDMI TX Encoder +=================================== + +This document defines device tree properties for the Synopsys DesignWare HDMI +TX Encoder (DWC HDMI TX). It doesn't constitue a device tree binding +specification by itself but is meant to be referenced by platform-specific +device tree bindings. + +When referenced from platform device tree bindings the properties defined in +this document are defined as follows. The platform device tree bindings are +responsible for defining whether each property is required or optional. + +- reg: Memory mapped base address and length of the DWC HDMI TX registers. + +- reg-io-width: Width of the registers specified by the reg property. The + value is expressed in bytes and must be equal to 1 or 4 if specified. The + register width defaults to 1 if the property is not present. + +- interrupts: Reference to the DWC HDMI TX interrupt. + +- clocks: References to all the clocks specified in the clock-names property + as specified in Documentation/devicetree/bindings/clock/clock-bindings.txt. + +- clock-names: The DWC HDMI TX uses the following clocks. + + - "iahb" is the bus clock for either AHB and APB (mandatory). + - "isfr" is the internal register configuration clock (mandatory). + - "cec" is the HDMI CEC controller main clock (optional). + +- ports: The connectivity of the DWC HDMI TX with the rest of the system is + expressed in using ports as specified in the device graph bindings defined + in Documentation/devicetree/bindings/graph.txt. The numbering of the ports + is platform-specific. diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml new file mode 100644 index 000000000..efbb3d011 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml @@ -0,0 +1,96 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/ite,it6505.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ITE it6505 Device Tree Bindings + +maintainers: + - Allen Chen <allen.chen@ite.com.tw> + +description: | + The IT6505 is a high-performance DisplayPort 1.1a transmitter, + fully compliant with DisplayPort 1.1a, HDCP 1.3 specifications. + The IT6505 supports color depth of up to 36 bits (12 bits/color) + and ensures robust transmission of high-quality uncompressed video + content, along with uncompressed and compressed digital audio content. + + Aside from the various video output formats supported, the IT6505 + also encodes and transmits up to 8 channels of I2S digital audio, + with sampling rate up to 192kHz and sample size up to 24 bits. + In addition, an S/PDIF input port takes in compressed audio of up to + 192kHz frame rate. + + Each IT6505 chip comes preprogrammed with an unique HDCP key, + in compliance with the HDCP 1.3 standard so as to provide secure + transmission of high-definition content. Users of the IT6505 need not + purchase any HDCP keys or ROMs. + +properties: + compatible: + const: ite,it6505 + + reg: + maxItems: 1 + + ovdd-supply: + maxItems: 1 + description: I/O voltage + + pwr18-supply: + maxItems: 1 + description: core voltage + + interrupts: + maxItems: 1 + description: interrupt specifier of INT pin + + reset-gpios: + maxItems: 1 + description: gpio specifier of RESET pin + + extcon: + maxItems: 1 + description: extcon specifier for the Power Delivery + + port: + type: object + description: A port node pointing to DPI host port node + +required: + - compatible + - ovdd-supply + - pwr18-supply + - interrupts + - reset-gpios + - extcon + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + dp-bridge@5c { + compatible = "ite,it6505"; + interrupts = <152 IRQ_TYPE_EDGE_FALLING 152 0>; + reg = <0x5c>; + pinctrl-names = "default"; + pinctrl-0 = <&it6505_pins>; + ovdd-supply = <&mt6358_vsim1_reg>; + pwr18-supply = <&it6505_pp18_reg>; + reset-gpios = <&pio 179 1>; + extcon = <&usbc_extcon>; + + port { + it6505_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml b/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml new file mode 100644 index 000000000..d60208359 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml @@ -0,0 +1,176 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/lontium,lt9611.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Lontium LT9611 2 Port MIPI to HDMI Bridge + +maintainers: + - Vinod Koul <vkoul@kernel.org> + +description: | + The LT9611 is a bridge device which converts DSI to HDMI + +properties: + compatible: + enum: + - lontium,lt9611 + + reg: + maxItems: 1 + + "#sound-dai-cells": + const: 1 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + description: GPIO connected to active high RESET pin. + + vdd-supply: + description: Regulator for 1.8V MIPI phy power. + + vcc-supply: + description: Regulator for 3.3V IO power. + + ports: + type: object + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + port@0: + type: object + description: | + Primary MIPI port-1 for MIPI input + + properties: + reg: + const: 0 + + patternProperties: + "^endpoint(@[0-9])$": + type: object + additionalProperties: false + + properties: + remote-endpoint: + $ref: /schemas/types.yaml#/definitions/phandle + + required: + - reg + + port@1: + type: object + description: | + Additional MIPI port-2 for MIPI input, used in combination + with primary MIPI port-1 to drive higher resolution displays + + properties: + reg: + const: 1 + + patternProperties: + "^endpoint(@[0-9])$": + type: object + additionalProperties: false + + properties: + remote-endpoint: + $ref: /schemas/types.yaml#/definitions/phandle + + required: + - reg + + port@2: + type: object + description: | + HDMI port for HDMI output + + properties: + reg: + const: 2 + + patternProperties: + "^endpoint(@[0-9])$": + type: object + additionalProperties: false + + properties: + remote-endpoint: + $ref: /schemas/types.yaml#/definitions/phandle + + required: + - reg + + required: + - "#address-cells" + - "#size-cells" + - port@0 + - port@2 + +required: + - compatible + - reg + - interrupts + - vdd-supply + - vcc-supply + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c10 { + #address-cells = <1>; + #size-cells = <0>; + + hdmi-bridge@3b { + compatible = "lontium,lt9611"; + reg = <0x3b>; + + reset-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>; + interrupts-extended = <&tlmm 84 IRQ_TYPE_EDGE_FALLING>; + + vdd-supply = <<9611_1v8>; + vcc-supply = <<9611_3v3>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lt9611_a: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + lt9611_b: endpoint { + remote-endpoint = <&dsi1_out>; + }; + }; + + port@2 { + reg = <2>; + lt9611_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml new file mode 100644 index 000000000..e5e3c7263 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml @@ -0,0 +1,145 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/lvds-codec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Transparent LVDS encoders and decoders + +maintainers: + - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> + +description: | + This binding supports transparent LVDS encoders and decoders that don't + require any configuration. + + LVDS is a physical layer specification defined in ANSI/TIA/EIA-644-A. Multiple + incompatible data link layers have been used over time to transmit image data + to LVDS panels. This binding targets devices compatible with the following + specifications only. + + [JEIDA] "Digital Interface Standards for Monitor", JEIDA-59-1999, February + 1999 (Version 1.0), Japan Electronic Industry Development Association (JEIDA) + [LDI] "Open LVDS Display Interface", May 1999 (Version 0.95), National + Semiconductor + [VESA] "VESA Notebook Panel Standard", October 2007 (Version 1.0), Video + Electronics Standards Association (VESA) + + Those devices have been marketed under the FPD-Link and FlatLink brand names + among others. + +properties: + compatible: + oneOf: + - items: + - enum: + - ti,ds90c185 # For the TI DS90C185 FPD-Link Serializer + - ti,ds90c187 # For the TI DS90C187 FPD-Link Serializer + - ti,sn75lvds83 # For the TI SN75LVDS83 FlatLink transmitter + - const: lvds-encoder # Generic LVDS encoder compatible fallback + - items: + - enum: + - ti,ds90cf384a # For the DS90CF384A FPD-Link LVDS Receiver + - const: lvds-decoder # Generic LVDS decoders compatible fallback + - enum: + - thine,thc63lvdm83d # For the THC63LVDM83D LVDS serializer + + ports: + type: object + description: | + This device has two video ports. Their connections are modeled using the + OF graph bindings specified in Documentation/devicetree/bindings/graph.txt + properties: + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + port@0: + type: object + description: | + For LVDS encoders, port 0 is the parallel input + For LVDS decoders, port 0 is the LVDS input + + port@1: + type: object + description: | + For LVDS encoders, port 1 is the LVDS output + For LVDS decoders, port 1 is the parallel output + + required: + - port@0 + - port@1 + + additionalProperties: false + + powerdown-gpios: + description: + The GPIO used to control the power down line of this device. + maxItems: 1 + + power-supply: + maxItems: 1 + +required: + - compatible + - ports + +additionalProperties: false + + +examples: + - | + lvds-encoder { + compatible = "ti,ds90c185", "lvds-encoder"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lvds_enc_in: endpoint { + remote-endpoint = <&display_out_rgb>; + }; + }; + + port@1 { + reg = <1>; + + lvds_enc_out: endpoint { + remote-endpoint = <&lvds_panel_in>; + }; + }; + }; + }; + + - | + lvds-decoder { + compatible = "ti,ds90cf384a", "lvds-decoder"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lvds_dec_in: endpoint { + remote-endpoint = <&display_out_lvds>; + }; + }; + + port@1 { + reg = <1>; + + lvds_dec_out: endpoint { + remote-endpoint = <&rgb_panel_in>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt b/Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt new file mode 100644 index 000000000..09e0a21f7 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt @@ -0,0 +1,91 @@ +Drivers for the second video output of the GE B850v3: + STDP4028-ge-b850v3-fw bridges (LVDS-DP) + STDP2690-ge-b850v3-fw bridges (DP-DP++) + +The video processing pipeline on the second output on the GE B850v3: + + Host -> LVDS|--(STDP4028)--|DP -> DP|--(STDP2690)--|DP++ -> Video output + +Each bridge has a dedicated flash containing firmware for supporting the custom +design. The result is that, in this design, neither the STDP4028 nor the +STDP2690 behave as the stock bridges would. The compatible strings include the +suffix "-ge-b850v3-fw" to make it clear that the driver is for the bridges with +the firmware specific for the GE B850v3. + +The hardware do not provide control over the video processing pipeline, as the +two bridges behaves as a single one. The only interfaces exposed by the +hardware are EDID, HPD, and interrupts. + +stdp4028-ge-b850v3-fw required properties: + - compatible : "megachips,stdp4028-ge-b850v3-fw" + - reg : I2C bus address + - interrupts : one interrupt should be described here, as in + <0 IRQ_TYPE_LEVEL_HIGH> + - ports : One input port(reg = <0>) and one output port(reg = <1>) + +stdp2690-ge-b850v3-fw required properties: + compatible : "megachips,stdp2690-ge-b850v3-fw" + - reg : I2C bus address + - ports : One input port(reg = <0>) and one output port(reg = <1>) + +Example: + +&mux2_i2c2 { + clock-frequency = <100000>; + + stdp4028@73 { + compatible = "megachips,stdp4028-ge-b850v3-fw"; + #address-cells = <1>; + #size-cells = <0>; + + reg = <0x73>; + + interrupt-parent = <&gpio2>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + stdp4028_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + port@1 { + reg = <1>; + stdp4028_out: endpoint { + remote-endpoint = <&stdp2690_in>; + }; + }; + }; + }; + + stdp2690@72 { + compatible = "megachips,stdp2690-ge-b850v3-fw"; + #address-cells = <1>; + #size-cells = <0>; + + reg = <0x72>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + stdp2690_in: endpoint { + remote-endpoint = <&stdp4028_out>; + }; + }; + + port@1 { + reg = <1>; + stdp2690_out: endpoint { + /* Connector for external display */ + }; + }; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml new file mode 100644 index 000000000..a125b2dd3 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml @@ -0,0 +1,229 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/nwl-dsi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Northwest Logic MIPI-DSI controller on i.MX SoCs + +maintainers: + - Guido Gúnther <agx@sigxcpu.org> + - Robert Chiras <robert.chiras@nxp.com> + +description: | + NWL MIPI-DSI host controller found on i.MX8 platforms. This is a dsi bridge for + the SOCs NWL MIPI-DSI host controller. + +allOf: + - $ref: ../dsi-controller.yaml# + +properties: + compatible: + const: fsl,imx8mq-nwl-dsi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + assigned-clock-parents: true + assigned-clock-rates: true + assigned-clocks: true + + clocks: + items: + - description: DSI core clock + - description: RX_ESC clock (used in escape mode) + - description: TX_ESC clock (used in escape mode) + - description: PHY_REF clock + - description: LCDIF clock + + clock-names: + items: + - const: core + - const: rx_esc + - const: tx_esc + - const: phy_ref + - const: lcdif + + mux-controls: + description: + mux controller node to use for operating the input mux + + phys: + maxItems: 1 + description: + A phandle to the phy module representing the DPHY + + phy-names: + items: + - const: dphy + + power-domains: + maxItems: 1 + + resets: + items: + - description: dsi byte reset line + - description: dsi dpi reset line + - description: dsi esc reset line + - description: dsi pclk reset line + + reset-names: + items: + - const: byte + - const: dpi + - const: esc + - const: pclk + + ports: + type: object + description: + A node containing DSI input & output port nodes with endpoint + definitions as documented in + Documentation/devicetree/bindings/graph.txt. + properties: + port@0: + type: object + description: + Input port node to receive pixel data from the + display controller. Exactly one endpoint must be + specified. + properties: + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + endpoint@0: + description: sub-node describing the input from LCDIF + type: object + + endpoint@1: + description: sub-node describing the input from DCSS + type: object + + reg: + const: 0 + + required: + - '#address-cells' + - '#size-cells' + - reg + + oneOf: + - required: + - endpoint@0 + - required: + - endpoint@1 + + additionalProperties: false + + port@1: + type: object + description: + DSI output port node to the panel or the next bridge + in the chain + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + required: + - '#address-cells' + - '#size-cells' + - port@0 + - port@1 + + additionalProperties: false + +required: + - '#address-cells' + - '#size-cells' + - clock-names + - clocks + - compatible + - interrupts + - mux-controls + - phy-names + - phys + - ports + - reg + - reset-names + - resets + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mq-clock.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/reset/imx8mq-reset.h> + + dsi@30a00000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8mq-nwl-dsi"; + reg = <0x30A00000 0x300>; + clocks = <&clk IMX8MQ_CLK_DSI_CORE>, + <&clk IMX8MQ_CLK_DSI_AHB>, + <&clk IMX8MQ_CLK_DSI_IPG_DIV>, + <&clk IMX8MQ_CLK_DSI_PHY_REF>, + <&clk IMX8MQ_CLK_LCDIF_PIXEL>; + clock-names = "core", "rx_esc", "tx_esc", "phy_ref", "lcdif"; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + mux-controls = <&mux 0>; + power-domains = <&pgc_mipi>; + resets = <&src IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N>, + <&src IMX8MQ_RESET_MIPI_DSI_DPI_RESET_N>, + <&src IMX8MQ_RESET_MIPI_DSI_ESC_RESET_N>, + <&src IMX8MQ_RESET_MIPI_DSI_PCLK_RESET_N>; + reset-names = "byte", "dpi", "esc", "pclk"; + phys = <&dphy>; + phy-names = "dphy"; + + panel@0 { + compatible = "rocktech,jh057n00900"; + reg = <0>; + vcc-supply = <®_2v8_p>; + iovcc-supply = <®_1v8_p>; + reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>; + port { + panel_in: endpoint { + remote-endpoint = <&mipi_dsi_out>; + }; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #size-cells = <0>; + #address-cells = <1>; + reg = <0>; + mipi_dsi_in: endpoint@0 { + reg = <0>; + remote-endpoint = <&lcdif_mipi_dsi>; + }; + }; + port@1 { + reg = <1>; + mipi_dsi_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/ps8622.txt b/Documentation/devicetree/bindings/display/bridge/ps8622.txt new file mode 100644 index 000000000..c989c3807 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/ps8622.txt @@ -0,0 +1,31 @@ +ps8622-bridge bindings + +Required properties: + - compatible: "parade,ps8622" or "parade,ps8625" + - reg: first i2c address of the bridge + - sleep-gpios: OF device-tree gpio specification for PD_ pin. + - reset-gpios: OF device-tree gpio specification for RST_ pin. + +Optional properties: + - lane-count: number of DP lanes to use + - use-external-pwm: backlight will be controlled by an external PWM + - video interfaces: Device node can contain video interface port + nodes for panel according to [1]. + +[1]: Documentation/devicetree/bindings/media/video-interfaces.txt + +Example: + lvds-bridge@48 { + compatible = "parade,ps8622"; + reg = <0x48>; + sleep-gpios = <&gpc3 6 1 0 0>; + reset-gpios = <&gpc3 1 1 0 0>; + lane-count = <1>; + ports { + port@0 { + bridge_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/ps8640.yaml b/Documentation/devicetree/bindings/display/bridge/ps8640.yaml new file mode 100644 index 000000000..7e27cfcf7 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/ps8640.yaml @@ -0,0 +1,120 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/ps8640.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MIPI DSI to eDP Video Format Converter Device Tree Bindings + +maintainers: + - Nicolas Boichat <drinkcat@chromium.org> + - Enric Balletbo i Serra <enric.balletbo@collabora.com> + +description: | + The PS8640 is a low power MIPI-to-eDP video format converter supporting + mobile devices with embedded panel resolutions up to 2048 x 1536. The + device accepts a single channel of MIPI DSI v1.1, with up to four lanes + plus clock, at a transmission rate up to 1.5Gbit/sec per lane. The + device outputs eDP v1.4, one or two lanes, at a link rate of up to + 3.24Gbit/sec per lane. + +properties: + compatible: + const: parade,ps8640 + + reg: + maxItems: 1 + description: Base I2C address of the device. + + powerdown-gpios: + maxItems: 1 + description: GPIO connected to active low powerdown. + + reset-gpios: + maxItems: 1 + description: GPIO connected to active low reset. + + vdd12-supply: + maxItems: 1 + description: Regulator for 1.2V digital core power. + + vdd33-supply: + maxItems: 1 + description: Regulator for 3.3V digital core power. + + ports: + type: object + description: + A node containing DSI input & output port nodes with endpoint + definitions as documented in + Documentation/devicetree/bindings/media/video-interfaces.txt + Documentation/devicetree/bindings/graph.txt + properties: + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + port@0: + type: object + description: | + Video port for DSI input + + port@1: + type: object + description: | + Video port for eDP output (panel or connector). + + required: + - port@0 + + additionalProperties: false + +required: + - compatible + - reg + - powerdown-gpios + - reset-gpios + - vdd12-supply + - vdd33-supply + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + ps8640: edp-bridge@18 { + compatible = "parade,ps8640"; + reg = <0x18>; + powerdown-gpios = <&pio 116 GPIO_ACTIVE_LOW>; + reset-gpios = <&pio 115 GPIO_ACTIVE_LOW>; + vdd12-supply = <&ps8640_fixed_1v2>; + vdd33-supply = <&mt6397_vgp2_reg>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + ps8640_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + ps8640_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + }; + }; + diff --git a/Documentation/devicetree/bindings/display/bridge/ptn3460.txt b/Documentation/devicetree/bindings/display/bridge/ptn3460.txt new file mode 100644 index 000000000..361971ba1 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/ptn3460.txt @@ -0,0 +1,39 @@ +ptn3460 bridge bindings + +Required properties: + - compatible: "nxp,ptn3460" + - reg: i2c address of the bridge + - powerdown-gpio: OF device-tree gpio specification for PD_N pin. + - reset-gpio: OF device-tree gpio specification for RST_N pin. + - edid-emulation: The EDID emulation entry to use + +-------+------------+------------------+ + | Value | Resolution | Description | + | 0 | 1024x768 | NXP Generic | + | 1 | 1920x1080 | NXP Generic | + | 2 | 1920x1080 | NXP Generic | + | 3 | 1600x900 | Samsung LTM200KT | + | 4 | 1920x1080 | Samsung LTM230HT | + | 5 | 1366x768 | NXP Generic | + | 6 | 1600x900 | ChiMei M215HGE | + +-------+------------+------------------+ + + - video interfaces: Device node can contain video interface port + nodes for panel according to [1]. + +[1]: Documentation/devicetree/bindings/media/video-interfaces.txt + +Example: + lvds-bridge@20 { + compatible = "nxp,ptn3460"; + reg = <0x20>; + powerdown-gpio = <&gpy2 5 1 0 0>; + reset-gpio = <&gpx1 5 1 0 0>; + edid-emulation = <5>; + ports { + port@0 { + bridge_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt new file mode 100644 index 000000000..3f6072651 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt @@ -0,0 +1,88 @@ +Renesas Gen3 DWC HDMI TX Encoder +================================ + +The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP +with a companion PHY IP. + +These DT bindings follow the Synopsys DWC HDMI TX bindings defined in +Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt with the +following device-specific properties. + + +Required properties: + +- compatible : Shall contain one or more of + - "renesas,r8a774a1-hdmi" for R8A774A1 (RZ/G2M) compatible HDMI TX + - "renesas,r8a774b1-hdmi" for R8A774B1 (RZ/G2N) compatible HDMI TX + - "renesas,r8a774e1-hdmi" for R8A774E1 (RZ/G2H) compatible HDMI TX + - "renesas,r8a7795-hdmi" for R8A7795 (R-Car H3) compatible HDMI TX + - "renesas,r8a7796-hdmi" for R8A7796 (R-Car M3-W) compatible HDMI TX + - "renesas,r8a77961-hdmi" for R8A77961 (R-Car M3-W+) compatible HDMI TX + - "renesas,r8a77965-hdmi" for R8A77965 (R-Car M3-N) compatible HDMI TX + - "renesas,rcar-gen3-hdmi" for the generic R-Car Gen3 and RZ/G2 compatible + HDMI TX + + When compatible with generic versions, nodes must list the SoC-specific + version corresponding to the platform first, followed by the + family-specific version. + +- reg: See dw_hdmi.txt. +- interrupts: HDMI interrupt number +- clocks: See dw_hdmi.txt. +- clock-names: Shall contain "iahb" and "isfr" as defined in dw_hdmi.txt. +- ports: See dw_hdmi.txt. The DWC HDMI shall have one port numbered 0 + corresponding to the video input of the controller and one port numbered 1 + corresponding to its HDMI output, and one port numbered 2 corresponding to + sound input of the controller. Each port shall have a single endpoint. + +Optional properties: + +- power-domains: Shall reference the power domain that contains the DWC HDMI, + if any. + + +Example: + + hdmi0: hdmi@fead0000 { + compatible = "renesas,r8a7795-hdmi", "renesas,rcar-gen3-hdmi"; + reg = <0 0xfead0000 0 0x10000>; + interrupts = <0 389 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_CORE R8A7795_CLK_S0D4>, <&cpg CPG_MOD 729>; + clock-names = "iahb", "isfr"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + dw_hdmi0_in: endpoint { + remote-endpoint = <&du_out_hdmi0>; + }; + }; + port@1 { + reg = <1>; + rcar_dw_hdmi0_out: endpoint { + remote-endpoint = <&hdmi0_con>; + }; + }; + port@2 { + reg = <2>; + rcar_dw_hdmi0_sound_in: endpoint { + remote-endpoint = <&hdmi_sound_out>; + }; + }; + }; + }; + + hdmi0-out { + compatible = "hdmi-connector"; + label = "HDMI0 OUT"; + type = "a"; + + port { + hdmi0_con: endpoint { + remote-endpoint = <&rcar_dw_hdmi0_out>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml new file mode 100644 index 000000000..e5b163951 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml @@ -0,0 +1,250 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/renesas,lvds.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car LVDS Encoder + +maintainers: + - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> + +description: | + These DT bindings describe the LVDS encoder embedded in the Renesas R-Car + Gen2, R-Car Gen3, RZ/G1 and RZ/G2 SoCs. + +properties: + compatible: + enum: + - renesas,r8a7742-lvds # for RZ/G1H compatible LVDS encoders + - renesas,r8a7743-lvds # for RZ/G1M compatible LVDS encoders + - renesas,r8a7744-lvds # for RZ/G1N compatible LVDS encoders + - renesas,r8a774a1-lvds # for RZ/G2M compatible LVDS encoders + - renesas,r8a774b1-lvds # for RZ/G2N compatible LVDS encoders + - renesas,r8a774c0-lvds # for RZ/G2E compatible LVDS encoders + - renesas,r8a774e1-lvds # for RZ/G2H compatible LVDS encoders + - renesas,r8a7790-lvds # for R-Car H2 compatible LVDS encoders + - renesas,r8a7791-lvds # for R-Car M2-W compatible LVDS encoders + - renesas,r8a7793-lvds # for R-Car M2-N compatible LVDS encoders + - renesas,r8a7795-lvds # for R-Car H3 compatible LVDS encoders + - renesas,r8a7796-lvds # for R-Car M3-W compatible LVDS encoders + - renesas,r8a77965-lvds # for R-Car M3-N compatible LVDS encoders + - renesas,r8a77970-lvds # for R-Car V3M compatible LVDS encoders + - renesas,r8a77980-lvds # for R-Car V3H compatible LVDS encoders + - renesas,r8a77990-lvds # for R-Car E3 compatible LVDS encoders + - renesas,r8a77995-lvds # for R-Car D3 compatible LVDS encoders + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 4 + + clock-names: + minItems: 1 + maxItems: 4 + + resets: + maxItems: 1 + + ports: + type: object + description: | + This device has two video ports. Their connections are modelled using the + OF graph bindings specified in Documentation/devicetree/bindings/graph.txt. + Each port shall have a single endpoint. + + properties: + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + port@0: + type: object + description: Parallel RGB input port + + port@1: + type: object + description: LVDS output port + + required: + - port@0 + - port@1 + + additionalProperties: false + + power-domains: + maxItems: 1 + + renesas,companion: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to the companion LVDS encoder. This property is mandatory + for the first LVDS encoder on D3 and E3 SoCs, and shall point to + the second encoder to be used as a companion in dual-link mode. It + shall not be set for any other LVDS encoder. + +required: + - compatible + - reg + - clocks + - power-domains + - resets + - ports + +if: + properties: + compatible: + enum: + - renesas,r8a774c0-lvds + - renesas,r8a77990-lvds + - renesas,r8a77995-lvds +then: + properties: + clocks: + minItems: 1 + maxItems: 4 + items: + - description: Functional clock + - description: EXTAL input clock + - description: DU_DOTCLKIN0 input clock + - description: DU_DOTCLKIN1 input clock + + clock-names: + minItems: 1 + maxItems: 4 + items: + - const: fck + # The LVDS encoder can use the EXTAL or DU_DOTCLKINx clocks. + # These clocks are optional. + - enum: + - extal + - dclkin.0 + - dclkin.1 + - enum: + - extal + - dclkin.0 + - dclkin.1 + - enum: + - extal + - dclkin.0 + - dclkin.1 + + required: + - clock-names + +else: + properties: + clocks: + maxItems: 1 + items: + - description: Functional clock + + clock-names: + maxItems: 1 + items: + - const: fck + + renesas,companion: false + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/renesas-cpg-mssr.h> + #include <dt-bindings/power/r8a7795-sysc.h> + + lvds@feb90000 { + compatible = "renesas,r8a7795-lvds"; + reg = <0xfeb90000 0x14>; + clocks = <&cpg CPG_MOD 727>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 727>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds_in: endpoint { + remote-endpoint = <&du_out_lvds0>; + }; + }; + port@1 { + reg = <1>; + lvds_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + }; + + - | + #include <dt-bindings/clock/renesas-cpg-mssr.h> + #include <dt-bindings/power/r8a77990-sysc.h> + + lvds0: lvds@feb90000 { + compatible = "renesas,r8a77990-lvds"; + reg = <0xfeb90000 0x20>; + clocks = <&cpg CPG_MOD 727>, + <&x13_clk>, + <&extal_clk>; + clock-names = "fck", "dclkin.0", "extal"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 727>; + + renesas,companion = <&lvds1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds0_in: endpoint { + remote-endpoint = <&du_out_lvds0>; + }; + }; + port@1 { + reg = <1>; + lvds0_out: endpoint { + remote-endpoint = <&panel_in1>; + }; + }; + }; + }; + + lvds1: lvds@feb90100 { + compatible = "renesas,r8a77990-lvds"; + reg = <0xfeb90100 0x20>; + clocks = <&cpg CPG_MOD 727>, + <&x13_clk>, + <&extal_clk>; + clock-names = "fck", "dclkin.0", "extal"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 726>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds1_in: endpoint { + remote-endpoint = <&du_out_lvds1>; + }; + }; + port@1 { + reg = <1>; + lvds1_out: endpoint { + remote-endpoint = <&panel_in2>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/bridge/sii902x.txt b/Documentation/devicetree/bindings/display/bridge/sii902x.txt new file mode 100644 index 000000000..02c21b584 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/sii902x.txt @@ -0,0 +1,78 @@ +sii902x HDMI bridge bindings + +Required properties: + - compatible: "sil,sii9022" + - reg: i2c address of the bridge + +Optional properties: + - interrupts: describe the interrupt line used to inform the host + about hotplug events. + - reset-gpios: OF device-tree gpio specification for RST_N pin. + - iovcc-supply: I/O Supply Voltage (1.8V or 3.3V) + - cvcc12-supply: Digital Core Supply Voltage (1.2V) + + HDMI audio properties: + - #sound-dai-cells: <0> or <1>. <0> if only i2s or spdif pin + is wired, <1> if the both are wired. HDMI audio is + configured only if this property is found. + - sil,i2s-data-lanes: Array of up to 4 integers with values of 0-3 + Each integer indicates which i2s pin is connected to which + audio fifo. The first integer selects i2s audio pin for the + first audio fifo#0 (HDMI channels 1&2), second for fifo#1 + (HDMI channels 3&4), and so on. There is 4 fifos and 4 i2s + pins (SD0 - SD3). Any i2s pin can be connected to any fifo, + but there can be no gaps. E.g. an i2s pin must be mapped to + fifo#0 and fifo#1 before mapping a channel to fifo#2. Default + value is <0>, describing SD0 pin beiging routed to hdmi audio + fifo #0. + - clocks: phandle and clock specifier for each clock listed in + the clock-names property + - clock-names: "mclk" + Describes SII902x MCLK input. MCLK can be used to produce + HDMI audio CTS values. This property follows + Documentation/devicetree/bindings/clock/clock-bindings.txt + consumer binding. + + If HDMI audio is configured the sii902x device becomes an I2S + and/or spdif audio codec component (e.g a digital audio sink), + that can be used in configuring a full audio devices with + simple-card or audio-graph-card binding. See their binding + documents on how to describe the way the sii902x device is + connected to the rest of the audio system: + Documentation/devicetree/bindings/sound/simple-card.yaml + Documentation/devicetree/bindings/sound/audio-graph-card.txt + Note: In case of the audio-graph-card binding the used port + index should be 3. + +Optional subnodes: + - video input: this subnode can contain a video input port node + to connect the bridge to a display controller output (See this + documentation [1]). + +[1]: Documentation/devicetree/bindings/media/video-interfaces.txt + +Example: + hdmi-bridge@39 { + compatible = "sil,sii9022"; + reg = <0x39>; + reset-gpios = <&pioA 1 0>; + iovcc-supply = <&v3v3_hdmi>; + cvcc12-supply = <&v1v2_hdmi>; + + #sound-dai-cells = <0>; + sil,i2s-data-lanes = < 0 1 2 >; + clocks = <&mclk>; + clock-names = "mclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + bridge_in: endpoint { + remote-endpoint = <&dc_out>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/sii9234.txt b/Documentation/devicetree/bindings/display/bridge/sii9234.txt new file mode 100644 index 000000000..a55bf77bd --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/sii9234.txt @@ -0,0 +1,49 @@ +Silicon Image SiI9234 HDMI/MHL bridge bindings + +Required properties: + - compatible : "sil,sii9234". + - reg : I2C address for TPI interface, use 0x39 + - avcc33-supply : MHL/USB Switch Supply Voltage (3.3V) + - iovcc18-supply : I/O Supply Voltage (1.8V) + - avcc12-supply : TMDS Analog Supply Voltage (1.2V) + - cvcc12-supply : Digital Core Supply Voltage (1.2V) + - interrupts: interrupt specifier of INT pin + - reset-gpios: gpio specifier of RESET pin (active low) + - video interfaces: Device node can contain two video interface port + nodes for HDMI encoder and connector according to [1]. + - port@0 - MHL to HDMI + - port@1 - MHL to connector + +[1]: Documentation/devicetree/bindings/media/video-interfaces.txt + + +Example: + sii9234@39 { + compatible = "sil,sii9234"; + reg = <0x39>; + avcc33-supply = <&vcc33mhl>; + iovcc18-supply = <&vcc18mhl>; + avcc12-supply = <&vsil12>; + cvcc12-supply = <&vsil12>; + reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpf3>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mhl_to_hdmi: endpoint { + remote-endpoint = <&hdmi_to_mhl>; + }; + }; + port@1 { + reg = <1>; + mhl_to_connector: endpoint { + remote-endpoint = <&connector_to_mhl>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/sil-sii8620.txt b/Documentation/devicetree/bindings/display/bridge/sil-sii8620.txt new file mode 100644 index 000000000..b05052f7d --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/sil-sii8620.txt @@ -0,0 +1,33 @@ +Silicon Image SiI8620 HDMI/MHL bridge bindings + +Required properties: + - compatible: "sil,sii8620" + - reg: i2c address of the bridge + - cvcc10-supply: Digital Core Supply Voltage (1.0V) + - iovcc18-supply: I/O Supply Voltage (1.8V) + - interrupts: interrupt specifier of INT pin + - reset-gpios: gpio specifier of RESET pin + - clocks, clock-names: specification and name of "xtal" clock + - video interfaces: Device node can contain video interface port + node for HDMI encoder according to [1]. + +[1]: Documentation/devicetree/bindings/media/video-interfaces.txt + +Example: + sii8620@39 { + reg = <0x39>; + compatible = "sil,sii8620"; + cvcc10-supply = <&ldo36_reg>; + iovcc18-supply = <&ldo34_reg>; + interrupt-parent = <&gpf0>; + interrupts = <2 0>; + reset-gpio = <&gpv7 0 0>; + clocks = <&pmu_system_controller 0>; + clock-names = "xtal"; + + port { + mhl_to_hdmi: endpoint { + remote-endpoint = <&hdmi_to_mhl>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml b/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml new file mode 100644 index 000000000..3ddb35fcf --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/simple-bridge.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Transparent non-programmable DRM bridges + +maintainers: + - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> + - Maxime Ripard <mripard@kernel.org> + +description: | + This binding supports transparent non-programmable bridges that don't require + any configuration, with a single input and a single output. + +properties: + compatible: + oneOf: + - items: + - enum: + - ti,ths8134a + - ti,ths8134b + - const: ti,ths8134 + - enum: + - adi,adv7123 + - dumb-vga-dac + - ti,opa362 + - ti,ths8134 + - ti,ths8135 + + ports: + type: object + description: | + This device has two video ports. Their connections are modeled using the + OF graph bindings specified in Documentation/devicetree/bindings/graph.txt. + properties: + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + port@0: + type: object + description: The bridge input + + port@1: + type: object + description: The bridge output + + required: + - port@0 + - port@1 + + additionalProperties: false + + enable-gpios: + maxItems: 1 + description: GPIO controlling bridge enable + + vdd-supply: + maxItems: 1 + description: Power supply for the bridge + +required: + - compatible + - ports + +additionalProperties: false + +examples: + - | + bridge { + compatible = "ti,ths8134a", "ti,ths8134"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + vga_bridge_in: endpoint { + remote-endpoint = <&tcon0_out_vga>; + }; + }; + + port@1 { + reg = <1>; + + vga_bridge_out: endpoint { + remote-endpoint = <&vga_con_in>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml new file mode 100644 index 000000000..e42cb610f --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/snps,dw-mipi-dsi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synopsys DesignWare MIPI DSI host controller + +maintainers: + - Philippe CORNU <philippe.cornu@st.com> + +description: | + This document defines device tree properties for the Synopsys DesignWare MIPI + DSI host controller. It doesn't constitue a device tree binding specification + by itself but is meant to be referenced by platform-specific device tree + bindings. + + When referenced from platform device tree bindings the properties defined in + this document are defined as follows. The platform device tree bindings are + responsible for defining whether each property is required or optional. + +allOf: + - $ref: ../dsi-controller.yaml# + +properties: + reg: + maxItems: 1 + + clocks: + items: + - description: Module clock + - description: DSI bus clock for either AHB and APB + - description: Pixel clock for the DPI/RGB input + minItems: 2 + + clock-names: + items: + - const: ref + - const: pclk + - const: px_clk + minItems: 2 + + resets: + maxItems: 1 + + reset-names: + const: apb + + ports: + type: object + + properties: + port@0: + type: object + description: Input node to receive pixel data. + port@1: + type: object + description: DSI output node to panel. + + required: + - port@0 + - port@1 + +required: + - clock-names + - clocks + - ports + - reg + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/display/bridge/tda998x.txt b/Documentation/devicetree/bindings/display/bridge/tda998x.txt new file mode 100644 index 000000000..f5a02f61d --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/tda998x.txt @@ -0,0 +1,54 @@ +Device-Tree bindings for the NXP TDA998x HDMI transmitter + +Required properties; + - compatible: must be "nxp,tda998x" + + - reg: I2C address + +Required node: + - port: Input port node with endpoint definition, as described + in Documentation/devicetree/bindings/graph.txt + +Optional properties: + - interrupts: interrupt number and trigger type + default: polling + + - pinctrl-0: pin control group to be used for + screen plug/unplug interrupt. + + - pinctrl-names: must contain a "default" entry. + + - video-ports: 24 bits value which defines how the video controller + output is wired to the TDA998x input - default: <0x230145> + + - audio-ports: array of 8-bit values, 2 values per one DAI[1]. + The first value defines the DAI type: TDA998x_SPDIF or TDA998x_I2S[2]. + The second value defines the tda998x AP_ENA reg content when the DAI + in question is used. The implementation allows one or two DAIs. If two + DAIs are defined, they must be of different type. + + - nxp,calib-gpios: calibration GPIO, which must correspond with the + gpio used for the TDA998x interrupt pin. + +[1] Documentation/sound/soc/dai.rst +[2] include/dt-bindings/display/tda998x.h + +Example: + +#include <dt-bindings/display/tda998x.h> + + tda998x: hdmi-encoder { + compatible = "nxp,tda998x"; + reg = <0x70>; + interrupt-parent = <&gpio0>; + interrupts = <27 2>; /* falling edge */ + pinctrl-0 = <&pmx_camera>; + pinctrl-names = "default"; + video-ports = <0x230145>; + + #sound-dai-cells = <2>; + /* DAI-format AP_ENA reg value */ + audio-ports = < TDA998x_SPDIF 0x04 + TDA998x_I2S 0x03>; + + }; diff --git a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml new file mode 100644 index 000000000..469ac4a34 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml @@ -0,0 +1,121 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/thine,thc63lvd1024.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Thine Electronics THC63LVD1024 LVDS Decoder + +maintainers: + - Jacopo Mondi <jacopo+renesas@jmondi.org> + - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> + +description: | + The THC63LVD1024 is a dual link LVDS receiver designed to convert LVDS + streams to parallel data outputs. The chip supports single/dual input/output + modes, handling up to two LVDS input streams and up to two digital CMOS/TTL + outputs. + + Single or dual operation mode, output data mapping and DDR output modes are + configured through input signals and the chip does not expose any control + bus. + +properties: + compatible: + const: thine,thc63lvd1024 + + ports: + type: object + description: | + This device has four video ports. Their connections are modeled using the + OF graph bindings specified in Documentation/devicetree/bindings/graph.txt. + + The device can operate in single-link mode or dual-link mode. In + single-link mode, all pixels are received on port@0, and port@1 shall not + contain any endpoint. In dual-link mode, even-numbered pixels are + received on port@0 and odd-numbered pixels on port@1, and both port@0 and + port@1 shall contain endpoints. + + properties: + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + port@0: + type: object + description: First LVDS input port + + port@1: + type: object + description: Second LVDS input port + + port@2: + type: object + description: First digital CMOS/TTL parallel output + + port@3: + type: object + description: Second digital CMOS/TTL parallel output + + required: + - port@0 + - port@2 + + additionalProperties: false + + oe-gpios: + maxItems: 1 + description: Output enable GPIO signal, pin name "OE", active high. + + powerdown-gpios: + maxItems: 1 + description: Power down GPIO signal, pin name "/PDWN", active low. + + vcc-supply: + maxItems: 1 + description: + Power supply for the TTL output, TTL CLOCKOUT signal, LVDS input, PLL and + digital circuitry. + +required: + - compatible + - ports + - vcc-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + lvds-decoder { + compatible = "thine,thc63lvd1024"; + + vcc-supply = <®_lvds_vcc>; + powerdown-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lvds_dec_in_0: endpoint { + remote-endpoint = <&lvds_out>; + }; + }; + + port@2 { + reg = <2>; + + lvds_dec_out_2: endpoint { + remote-endpoint = <&adv7511_in>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml new file mode 100644 index 000000000..f0e0345da --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml @@ -0,0 +1,293 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/ti,sn65dsi86.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SN65DSI86 DSI to eDP bridge chip + +maintainers: + - Sandeep Panda <spanda@codeaurora.org> + +description: | + The Texas Instruments SN65DSI86 bridge takes MIPI DSI in and outputs eDP. + https://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=sn65dsi86&fileType=pdf + +properties: + compatible: + const: ti,sn65dsi86 + + reg: + enum: [ 0x2c, 0x2d ] + + enable-gpios: + maxItems: 1 + description: GPIO specifier for bridge_en pin (active high). + + suspend-gpios: + maxItems: 1 + description: GPIO specifier for GPIO1 pin on bridge (active low). + + no-hpd: + type: boolean + description: + Set if the HPD line on the bridge isn't hooked up to anything or is + otherwise unusable. + + vccio-supply: + description: A 1.8V supply that powers the digital IOs. + + vpll-supply: + description: A 1.8V supply that powers the DisplayPort PLL. + + vcca-supply: + description: A 1.2V supply that powers the analog circuits. + + vcc-supply: + description: A 1.2V supply that powers the digital core. + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + description: + Clock specifier for input reference clock. The reference clock rate must + be 12 MHz, 19.2 MHz, 26 MHz, 27 MHz or 38.4 MHz. + + clock-names: + const: refclk + + gpio-controller: true + '#gpio-cells': + const: 2 + description: + First cell is pin number, second cell is flags. GPIO pin numbers are + 1-based to match the datasheet. See ../../gpio/gpio.txt for more + information. + + '#pwm-cells': + const: 1 + description: See ../../pwm/pwm.yaml for description of the cell formats. + + ports: + type: object + additionalProperties: false + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + port@0: + type: object + additionalProperties: false + + description: + Video port for MIPI DSI input + + properties: + reg: + const: 0 + + endpoint: + type: object + additionalProperties: false + properties: + remote-endpoint: true + + required: + - reg + + port@1: + type: object + additionalProperties: false + + description: + Video port for eDP output (panel or connector). + + properties: + reg: + const: 1 + + endpoint: + type: object + additionalProperties: false + + properties: + remote-endpoint: true + + data-lanes: + oneOf: + - minItems: 1 + maxItems: 1 + uniqueItems: true + items: + enum: + - 0 + - 1 + description: + If you have 1 logical lane the bridge supports routing + to either port 0 or port 1. Port 0 is suggested. + See ../../media/video-interface.txt for details. + + - minItems: 2 + maxItems: 2 + uniqueItems: true + items: + enum: + - 0 + - 1 + description: + If you have 2 logical lanes the bridge supports + reordering but only on physical ports 0 and 1. + See ../../media/video-interface.txt for details. + + - minItems: 4 + maxItems: 4 + uniqueItems: true + items: + enum: + - 0 + - 1 + - 2 + - 3 + description: + If you have 4 logical lanes the bridge supports + reordering in any way. + See ../../media/video-interface.txt for details. + + lane-polarities: + minItems: 1 + maxItems: 4 + items: + enum: + - 0 + - 1 + description: See ../../media/video-interface.txt + + dependencies: + lane-polarities: [data-lanes] + + required: + - reg + + required: + - "#address-cells" + - "#size-cells" + - port@0 + - port@1 + +required: + - compatible + - reg + - enable-gpios + - vccio-supply + - vpll-supply + - vcca-supply + - vcc-supply + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + bridge@2d { + compatible = "ti,sn65dsi86"; + reg = <0x2d>; + + interrupt-parent = <&tlmm>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; + + enable-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>; + + vpll-supply = <&src_pp1800_s4a>; + vccio-supply = <&src_pp1800_s4a>; + vcca-supply = <&src_pp1200_l2a>; + vcc-supply = <&src_pp1200_l2a>; + + clocks = <&rpmhcc RPMH_LN_BB_CLK2>; + clock-names = "refclk"; + + no-hpd; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&panel_in_edp>; + }; + }; + }; + }; + }; + - | + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + bridge@2d { + compatible = "ti,sn65dsi86"; + reg = <0x2d>; + + enable-gpios = <&msmgpio 33 GPIO_ACTIVE_HIGH>; + suspend-gpios = <&msmgpio 34 GPIO_ACTIVE_LOW>; + + interrupts-extended = <&gpio3 4 IRQ_TYPE_EDGE_FALLING>; + + vccio-supply = <&pm8916_l17>; + vcca-supply = <&pm8916_l6>; + vpll-supply = <&pm8916_l17>; + vcc-supply = <&pm8916_l6>; + + clock-names = "refclk"; + clocks = <&input_refclk>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + edp_bridge_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + + port@1 { + reg = <1>; + + edp_bridge_out: endpoint { + data-lanes = <2 1 3 0>; + lane-polarities = <0 1 0 1>; + remote-endpoint = <&edp_panel_in>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/ti,tfp410.yaml b/Documentation/devicetree/bindings/display/bridge/ti,tfp410.yaml new file mode 100644 index 000000000..605831c1e --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/ti,tfp410.yaml @@ -0,0 +1,131 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/ti,tfp410.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TFP410 DPI to DVI encoder + +maintainers: + - Tomi Valkeinen <tomi.valkeinen@ti.com> + - Jyri Sarha <jsarha@ti.com> + +properties: + compatible: + const: ti,tfp410 + + reg: + description: I2C address of the device. + maxItems: 1 + + powerdown-gpios: + maxItems: 1 + + ti,deskew: + description: + Data de-skew value in 350ps increments, from 0 to 7, as configured + through the DK[3:1] pins. The de-skew multiplier is computed as + (DK[3:1] - 4), so it ranges from -4 to 3. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 7 + + ports: + description: + A node containing input and output port nodes with endpoint + definitions as documented in + Documentation/devicetree/bindings/media/video-interfaces.txt + type: object + + properties: + port@0: + description: DPI input port. + type: object + + properties: + reg: + const: 0 + + endpoint: + type: object + + properties: + pclk-sample: + description: + Endpoint sampling edge. + enum: + - 0 # Falling edge + - 1 # Rising edge + default: 0 + + bus-width: + description: + Endpoint bus width. + enum: + - 12 # 12 data lines connected and dual-edge mode + - 24 # 24 data lines connected and single-edge mode + default: 24 + + port@1: + description: DVI output port. + type: object + + properties: + reg: + const: 1 + + endpoint: + type: object + + required: + - port@0 + - port@1 + +required: + - compatible + - ports + +if: + required: + - reg +then: + properties: + ti,deskew: false +else: + required: + - ti,deskew + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + tfp410: encoder { + compatible = "ti,tfp410"; + powerdown-gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>; + ti,deskew = <3>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + tfp410_in: endpoint { + pclk-sample = <1>; + bus-width = <24>; + remote-endpoint = <&dpi_out>; + }; + }; + + port@1 { + reg = <1>; + tfp410_out: endpoint { + remote-endpoint = <&dvi_connector_in>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml new file mode 100644 index 000000000..195025e68 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml @@ -0,0 +1,127 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358762.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Toshiba TC358762 MIPI DSI to MIPI DPI bridge + +maintainers: + - Marek Vasut <marex@denx.de> + +description: | + The TC358762 is bridge device which converts MIPI DSI to MIPI DPI. + +properties: + compatible: + enum: + - toshiba,tc358762 + + reg: + maxItems: 1 + description: virtual channel number of a DSI peripheral + + vddc-supply: + description: Regulator for 1.2V internal core power. + + ports: + type: object + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + port@0: + type: object + additionalProperties: false + + description: | + Video port for MIPI DSI input + + properties: + reg: + const: 0 + + patternProperties: + endpoint: + type: object + additionalProperties: false + + properties: + remote-endpoint: true + + required: + - reg + + port@1: + type: object + additionalProperties: false + + description: | + Video port for MIPI DPI output (panel or connector). + + properties: + reg: + const: 1 + + patternProperties: + endpoint: + type: object + additionalProperties: false + + properties: + remote-endpoint: true + + required: + - reg + + required: + - "#address-cells" + - "#size-cells" + - port@0 + - port@1 + +required: + - compatible + - reg + - vddc-supply + - ports + +additionalProperties: false + +examples: + - | + i2c1 { + #address-cells = <1>; + #size-cells = <0>; + + bridge@0 { + reg = <0>; + compatible = "toshiba,tc358762"; + vddc-supply = <&vcc_1v2_reg>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + bridge_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + + port@1 { + reg = <1>; + bridge_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.txt b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.txt new file mode 100644 index 000000000..8f9abf28a --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.txt @@ -0,0 +1,35 @@ +TC358764 MIPI-DSI to LVDS panel bridge + +Required properties: + - compatible: "toshiba,tc358764" + - reg: the virtual channel number of a DSI peripheral + - vddc-supply: core voltage supply, 1.2V + - vddio-supply: I/O voltage supply, 1.8V or 3.3V + - vddlvds-supply: LVDS1/2 voltage supply, 3.3V + - reset-gpios: a GPIO spec for the reset pin + +The device node can contain following 'port' child nodes, +according to the OF graph bindings defined in [1]: + 0: DSI Input, not required, if the bridge is DSI controlled + 1: LVDS Output, mandatory + +[1]: Documentation/devicetree/bindings/media/video-interfaces.txt + +Example: + + bridge@0 { + reg = <0>; + compatible = "toshiba,tc358764"; + vddc-supply = <&vcc_1v2_reg>; + vddio-supply = <&vcc_1v8_reg>; + vddlvds-supply = <&vcc_3v3_reg>; + reset-gpios = <&gpd1 6 GPIO_ACTIVE_LOW>; + #address-cells = <1>; + #size-cells = <0>; + port@1 { + reg = <1>; + lvds_ep: endpoint { + remote-endpoint = <&panel_ep>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt new file mode 100644 index 000000000..583c5e9db --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt @@ -0,0 +1,54 @@ +Toshiba TC358767 eDP bridge bindings + +Required properties: + - compatible: "toshiba,tc358767" + - reg: i2c address of the bridge, 0x68 or 0x0f, depending on bootstrap pins + - clock-names: should be "ref" + - clocks: OF device-tree clock specification for refclk input. The reference + clock rate must be 13 MHz, 19.2 MHz, 26 MHz, or 38.4 MHz. + +Optional properties: + - shutdown-gpios: OF device-tree gpio specification for SD pin + (active high shutdown input) + - reset-gpios: OF device-tree gpio specification for RSTX pin + (active low system reset) + - toshiba,hpd-pin: TC358767 GPIO pin number to which HPD is connected to (0 or 1) + - ports: the ports node can contain video interface port nodes to connect + to a DPI/DSI source and to an eDP/DP sink according to [1][2]: + - port@0: DSI input port + - port@1: DPI input port + - port@2: eDP/DP output port + +[1]: Documentation/devicetree/bindings/graph.txt +[2]: Documentation/devicetree/bindings/media/video-interfaces.txt + +Example: + edp-bridge@68 { + compatible = "toshiba,tc358767"; + reg = <0x68>; + shutdown-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; + clock-names = "ref"; + clocks = <&edp_refclk>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + bridge_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + + port@2 { + reg = <2>; + + bridge_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml new file mode 100644 index 000000000..c036a75db --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml @@ -0,0 +1,159 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358768.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Toschiba TC358768/TC358778 Parallel RGB to MIPI DSI bridge + +maintainers: + - Peter Ujfalusi <peter.ujfalusi@ti.com> + +description: | + The TC358768/TC358778 is bridge device which converts RGB to DSI. + +properties: + compatible: + enum: + - toshiba,tc358768 + - toshiba,tc358778 + + reg: + maxItems: 1 + description: base I2C address of the device + + reset-gpios: + maxItems: 1 + description: GPIO connected to active low RESX pin + + vddc-supply: + description: Regulator for 1.2V internal core power. + + vddmipi-supply: + description: Regulator for 1.2V for the MIPI. + + vddio-supply: + description: Regulator for 1.8V - 3.3V IO power. + + clocks: + maxItems: 1 + + clock-names: + const: refclk + + ports: + type: object + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + port@0: + type: object + additionalProperties: false + + description: | + Video port for RGB input + + properties: + reg: + const: 0 + + patternProperties: + endpoint: + type: object + additionalProperties: false + + properties: + data-lines: + enum: [ 16, 18, 24 ] + + remote-endpoint: true + + required: + - reg + + port@1: + type: object + additionalProperties: false + + description: | + Video port for DSI output (panel or connector). + + properties: + reg: + const: 1 + + patternProperties: + endpoint: + type: object + additionalProperties: false + + properties: + remote-endpoint: true + + required: + - reg + + required: + - "#address-cells" + - "#size-cells" + - port@0 + - port@1 + +required: + - compatible + - reg + - vddc-supply + - vddmipi-supply + - vddio-supply + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c1 { + #address-cells = <1>; + #size-cells = <0>; + + dsi_bridge: dsi-bridge@e { + compatible = "toshiba,tc358768"; + reg = <0xe>; + + clocks = <&tc358768_refclk>; + clock-names = "refclk"; + + reset-gpios = <&pcf_display_board 0 GPIO_ACTIVE_LOW>; + + vddc-supply = <&v1_2d>; + vddmipi-supply = <&v1_2d>; + vddio-supply = <&v3_3d>; + + dsi_bridge_ports: ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + rgb_in: endpoint { + remote-endpoint = <&dpi_out>; + data-lines = <24>; + }; + }; + + port@1 { + reg = <1>; + dsi_out: endpoint { + remote-endpoint = <&lcd_in>; + }; + }; + }; + }; + }; + diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml new file mode 100644 index 000000000..fd3113aa9 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml @@ -0,0 +1,217 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358775.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Toshiba TC358775 DSI to LVDS bridge bindings + +maintainers: + - Vinay Simha BN <simhavcs@gmail.com> + +description: | + This binding supports DSI to LVDS bridge TC358775 + + MIPI DSI-RX Data 4-lane, CLK 1-lane with data rates up to 800 Mbps/lane. + Video frame size: + Up to 1600x1200 24-bit/pixel resolution for single-link LVDS display panel + limited by 135 MHz LVDS speed + Up to WUXGA (1920x1200 24-bit pixels) resolution for dual-link LVDS display + panel, limited by 270 MHz LVDS speed. + +properties: + compatible: + const: toshiba,tc358775 + + reg: + maxItems: 1 + description: i2c address of the bridge, 0x0f + + vdd-supply: + maxItems: 1 + description: 1.2V LVDS Power Supply + + vddio-supply: + maxItems: 1 + description: 1.8V IO Power Supply + + stby-gpios: + maxItems: 1 + description: Standby pin, Low active + + reset-gpios: + maxItems: 1 + description: Hardware reset, Low active + + ports: + type: object + description: + A node containing input and output port nodes with endpoint definitions + as documented in + Documentation/devicetree/bindings/media/video-interfaces.txt + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + port@0: + type: object + description: | + DSI Input. The remote endpoint phandle should be a + reference to a valid mipi_dsi_host device node. + + port@1: + type: object + description: | + Video port for LVDS output (panel or connector). + + port@2: + type: object + description: | + Video port for Dual link LVDS output (panel or connector). + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - vdd-supply + - vddio-supply + - stby-gpios + - reset-gpios + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + /* For single-link LVDS display panel */ + + i2c@78b8000 { + /* On High speed expansion */ + label = "HS-I2C2"; + reg = <0x078b8000 0x500>; + clock-frequency = <400000>; /* fastmode operation */ + #address-cells = <1>; + #size-cells = <0>; + + tc_bridge: bridge@f { + compatible = "toshiba,tc358775"; + reg = <0x0f>; + + vdd-supply = <&pm8916_l2>; + vddio-supply = <&pm8916_l6>; + + stby-gpios = <&msmgpio 99 GPIO_ACTIVE_LOW>; + reset-gpios = <&msmgpio 72 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + d2l_in_test: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + lvds_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + }; + }; + + dsi@1a98000 { + reg = <0x1a98000 0x25c>; + reg-names = "dsi_ctrl"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@1 { + reg = <1>; + dsi0_out: endpoint { + remote-endpoint = <&d2l_in_test>; + data-lanes = <0 1 2 3>; + }; + }; + }; + }; + + - | + /* For dual-link LVDS display panel */ + + i2c@78b8000 { + /* On High speed expansion */ + label = "HS-I2C2"; + reg = <0x078b8000 0x500>; + clock-frequency = <400000>; /* fastmode operation */ + #address-cells = <1>; + #size-cells = <0>; + + tc_bridge_dual: bridge@f { + compatible = "toshiba,tc358775"; + reg = <0x0f>; + + vdd-supply = <&pm8916_l2>; + vddio-supply = <&pm8916_l6>; + + stby-gpios = <&msmgpio 99 GPIO_ACTIVE_LOW>; + reset-gpios = <&msmgpio 72 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + d2l_in_dual: endpoint { + remote-endpoint = <&dsi0_out_dual>; + }; + }; + + port@1 { + reg = <1>; + lvds0_out: endpoint { + remote-endpoint = <&panel_in0>; + }; + }; + + port@2 { + reg = <2>; + lvds1_out: endpoint { + remote-endpoint = <&panel_in1>; + }; + }; + }; + }; + }; + + dsi@1a98000 { + reg = <0x1a98000 0x25c>; + reg-names = "dsi_ctrl"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@1 { + reg = <1>; + dsi0_out_dual: endpoint { + remote-endpoint = <&d2l_in_dual>; + data-lanes = <0 1 2 3>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/cirrus,clps711x-fb.txt b/Documentation/devicetree/bindings/display/cirrus,clps711x-fb.txt new file mode 100644 index 000000000..0ab5f0663 --- /dev/null +++ b/Documentation/devicetree/bindings/display/cirrus,clps711x-fb.txt @@ -0,0 +1,47 @@ +* Currus Logic CLPS711X Framebuffer + +Required properties: +- compatible: Shall contain "cirrus,ep7209-fb". +- reg : Physical base address and length of the controller's registers + + location and size of the framebuffer memory. +- clocks : phandle + clock specifier pair of the FB reference clock. +- display : phandle to a display node as described in + Documentation/devicetree/bindings/display/panel/display-timing.txt. + Additionally, the display node has to define properties: + - bits-per-pixel: Bits per pixel. + - ac-prescale : LCD AC bias frequency. This frequency is the required + AC bias frequency for a given manufacturer's LCD plate. + - cmap-invert : Invert the color levels (Optional). + +Optional properties: +- lcd-supply: Regulator for LCD supply voltage. + +Example: + fb: fb@800002c0 { + compatible = "cirrus,ep7312-fb", "cirrus,ep7209-fb"; + reg = <0x800002c0 0xd44>, <0x60000000 0xc000>; + clocks = <&clks 2>; + lcd-supply = <®5v0>; + display = <&display>; + }; + + display: display { + model = "320x240x4"; + bits-per-pixel = <4>; + ac-prescale = <17>; + + display-timings { + native-mode = <&timing0>; + timing0: 320x240 { + hactive = <320>; + hback-porch = <0>; + hfront-porch = <0>; + hsync-len = <0>; + vactive = <240>; + vback-porch = <0>; + vfront-porch = <0>; + vsync-len = <0>; + clock-frequency = <6500000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/connector/analog-tv-connector.yaml b/Documentation/devicetree/bindings/display/connector/analog-tv-connector.yaml new file mode 100644 index 000000000..eebe88fed --- /dev/null +++ b/Documentation/devicetree/bindings/display/connector/analog-tv-connector.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/connector/analog-tv-connector.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog TV Connector + +maintainers: + - Laurent Pinchart <Laurent.pinchart@ideasonboard.com> + +properties: + compatible: + enum: + - composite-video-connector + - svideo-connector + + label: true + + sdtv-standards: + description: + Limit the supported TV standards on a connector to the given ones. If + not specified all TV standards are allowed. Possible TV standards are + defined in include/dt-bindings/display/sdtv-standards.h. + $ref: /schemas/types.yaml#/definitions/uint32 + + port: + description: Connection to controller providing analog TV signals + +required: + - compatible + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/display/sdtv-standards.h> + + connector { + compatible = "composite-video-connector"; + label = "tv"; + sdtv-standards = <(SDTV_STD_PAL | SDTV_STD_NTSC)>; + + port { + tv_connector_in: endpoint { + remote-endpoint = <&venc_out>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/connector/dvi-connector.yaml b/Documentation/devicetree/bindings/display/connector/dvi-connector.yaml new file mode 100644 index 000000000..71cb9220f --- /dev/null +++ b/Documentation/devicetree/bindings/display/connector/dvi-connector.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/connector/dvi-connector.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: DVI Connector + +maintainers: + - Laurent Pinchart <Laurent.pinchart@ideasonboard.com> + +properties: + compatible: + const: dvi-connector + + label: true + + hpd-gpios: + description: A GPIO line connected to HPD + maxItems: 1 + + ddc-i2c-bus: + description: phandle link to the I2C controller used for DDC EDID probing + $ref: /schemas/types.yaml#/definitions/phandle + + analog: + type: boolean + description: the connector has DVI analog pins + + digital: + type: boolean + description: the connector has DVI digital pins + + dual-link: + type: boolean + description: the connector has pins for DVI dual-link + + port: + description: Connection to controller providing DVI signals + +required: + - compatible + - port + +anyOf: + - required: + - analog + - required: + - digital + +additionalProperties: false + +examples: + - | + connector { + compatible = "dvi-connector"; + label = "dvi"; + + digital; + + ddc-i2c-bus = <&i2c3>; + + port { + dvi_connector_in: endpoint { + remote-endpoint = <&tfp410_out>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/connector/hdmi-connector.yaml b/Documentation/devicetree/bindings/display/connector/hdmi-connector.yaml new file mode 100644 index 000000000..14d7128af --- /dev/null +++ b/Documentation/devicetree/bindings/display/connector/hdmi-connector.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/connector/hdmi-connector.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: HDMI Connector + +maintainers: + - Laurent Pinchart <Laurent.pinchart@ideasonboard.com> + +properties: + compatible: + const: hdmi-connector + + type: + description: The HDMI connector type + enum: + - a # Standard full size + - b # Never deployed? + - c # Mini + - d # Micro + - e # automotive + + label: true + + hpd-gpios: + description: A GPIO line connected to HPD + maxItems: 1 + + ddc-i2c-bus: + description: phandle link to the I2C controller used for DDC EDID probing + $ref: /schemas/types.yaml#/definitions/phandle + + ddc-en-gpios: + description: GPIO signal to enable DDC bus + maxItems: 1 + + port: + description: Connection to controller providing HDMI signals + +required: + - compatible + - port + - type + +additionalProperties: false + +examples: + - | + connector { + compatible = "hdmi-connector"; + label = "hdmi"; + + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&tpd12s015_out>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/connector/vga-connector.yaml b/Documentation/devicetree/bindings/display/connector/vga-connector.yaml new file mode 100644 index 000000000..5782c4bb3 --- /dev/null +++ b/Documentation/devicetree/bindings/display/connector/vga-connector.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/connector/vga-connector.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: VGA Connector + +maintainers: + - Laurent Pinchart <Laurent.pinchart@ideasonboard.com> + +properties: + compatible: + const: vga-connector + + label: true + + ddc-i2c-bus: + description: phandle link to the I2C controller used for DDC EDID probing + $ref: /schemas/types.yaml#/definitions/phandle + + port: + description: Connection to controller providing VGA signals + +required: + - compatible + - port + +additionalProperties: false + +examples: + - | + connector { + compatible = "vga-connector"; + label = "vga"; + + ddc-i2c-bus = <&i2c3>; + + port { + vga_connector_in: endpoint { + remote-endpoint = <&adv7123_out>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/dsi-controller.yaml b/Documentation/devicetree/bindings/display/dsi-controller.yaml new file mode 100644 index 000000000..ca21671f6 --- /dev/null +++ b/Documentation/devicetree/bindings/display/dsi-controller.yaml @@ -0,0 +1,93 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/dsi-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common Properties for DSI Display Panels + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: | + This document defines device tree properties common to DSI, Display + Serial Interface controllers and attached panels. It doesn't constitute + a device tree binding specification by itself but is meant to be referenced + by device tree bindings. + + When referenced from panel device tree bindings the properties defined in + this document are defined as follows. The panel device tree bindings are + responsible for defining whether each property is required or optional. + + Notice: this binding concerns DSI panels connected directly to a master + without any intermediate port graph to the panel. Each DSI master + can control one to four virtual channels to one panel. Each virtual + channel should have a node "panel" for their virtual channel with their + reg-property set to the virtual channel number, usually there is just + one virtual channel, number 0. + +properties: + $nodename: + pattern: "^dsi(@.*)?$" + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^panel@[0-3]$": + description: Panels connected to the DSI link + type: object + + properties: + reg: + minimum: 0 + maximum: 3 + description: + The virtual channel number of a DSI peripheral. Must be in the range + from 0 to 3, as DSI uses a 2-bit addressing scheme. Some DSI + peripherals respond to more than a single virtual channel. In that + case the reg property can take multiple entries, one for each virtual + channel that the peripheral responds to. + + clock-master: + type: boolean + description: + Should be enabled if the host is being used in conjunction with + another DSI host to drive the same peripheral. Hardware supporting + such a configuration generally requires the data on both the busses + to be driven by the same clock. Only the DSI host instance + controlling this clock should contain this property. + + enforce-video-mode: + type: boolean + description: + The best option is usually to run a panel in command mode, as this + gives better control over the panel hardware. However for different + reasons like broken hardware, missing features or testing, it may be + useful to be able to force a command mode-capable panel into video + mode. + + required: + - reg + +additionalProperties: true + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + dsi@a0351000 { + reg = <0xa0351000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "sony,acx424akp"; + reg = <0>; + vddi-supply = <&ab8500_ldo_aux1_reg>; + reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/exynos/exynos-mic.txt b/Documentation/devicetree/bindings/display/exynos/exynos-mic.txt new file mode 100644 index 000000000..0fba2ee64 --- /dev/null +++ b/Documentation/devicetree/bindings/display/exynos/exynos-mic.txt @@ -0,0 +1,51 @@ +Device-Tree bindings for Samsung Exynos SoC mobile image compressor (MIC) + +MIC (mobile image compressor) resides between decon and mipi dsi. Mipi dsi is +not capable to transfer high resoltuion frame data as decon can send. MIC +solves this problem by compressing the frame data by 1/2 before it is +transferred through mipi dsi. The compressed frame data must be uncompressed in +the panel PCB. + +Required properties: +- compatible: value should be "samsung,exynos5433-mic". +- reg: physical base address and length of the MIC registers set and system + register of mic. +- clocks: must include clock specifiers corresponding to entries in the + clock-names property. +- clock-names: list of clock names sorted in the same order as the clocks + property. Must contain "pclk_mic0", "sclk_rgb_vclk_to_mic0". +- samsung,disp-syscon: the reference node for syscon for DISP block. +- ports: contains a port which is connected to decon node and dsi node. + address-cells and size-cells must 1 and 0, respectively. +- port: contains an endpoint node which is connected to the endpoint in the + decon node or dsi node. The reg value must be 0 and 1 respectively. + +Example: +SoC specific DT entry: +mic: mic@13930000 { + compatible = "samsung,exynos5433-mic"; + reg = <0x13930000 0x48>; + clocks = <&cmu_disp CLK_PCLK_MIC0>, + <&cmu_disp CLK_SCLK_RGB_VCLK_TO_MIC0>; + clock-names = "pclk_mic0", "sclk_rgb_vclk_to_mic0"; + samsung,disp-syscon = <&syscon_disp>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mic_to_decon: endpoint { + remote-endpoint = <&decon_to_mic>; + }; + }; + + port@1 { + reg = <1>; + mic_to_dsi: endpoint { + remote-endpoint = <&dsi_to_mic>; + }; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt b/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt new file mode 100644 index 000000000..775193e1c --- /dev/null +++ b/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt @@ -0,0 +1,60 @@ +Device-Tree bindings for Samsung Exynos SoC display controller (DECON) + +DECON (Display and Enhancement Controller) is the Display Controller for the +Exynos series of SoCs which transfers the image data from a video memory +buffer to an external LCD interface. + +Required properties: +- compatible: value should be one of: + "samsung,exynos5433-decon", "samsung,exynos5433-decon-tv"; +- reg: physical base address and length of the DECON registers set. +- interrupt-names: should contain the interrupt names depending on mode of work: + video mode: "vsync", + command mode: "lcd_sys", + command mode with software trigger: "lcd_sys", "te". +- interrupts or interrupts-extended: list of interrupt specifiers corresponding + to names privided in interrupt-names, as described in + interrupt-controller/interrupts.txt +- clocks: must include clock specifiers corresponding to entries in the + clock-names property. +- clock-names: list of clock names sorted in the same order as the clocks + property. Must contain "pclk", "aclk_decon", "aclk_smmu_decon0x", + "aclk_xiu_decon0x", "pclk_smmu_decon0x", "aclk_smmu_decon1x", + "aclk_xiu_decon1x", "pclk_smmu_decon1x", clk_decon_vclk", + "sclk_decon_eclk" +- ports: contains a port which is connected to mic node. address-cells and + size-cells must 1 and 0, respectively. +- port: contains an endpoint node which is connected to the endpoint in the mic + node. The reg value muset be 0. + +Example: +SoC specific DT entry: +decon: decon@13800000 { + compatible = "samsung,exynos5433-decon"; + reg = <0x13800000 0x2104>; + clocks = <&cmu_disp CLK_ACLK_DECON>, <&cmu_disp CLK_ACLK_SMMU_DECON0X>, + <&cmu_disp CLK_ACLK_XIU_DECON0X>, + <&cmu_disp CLK_PCLK_SMMU_DECON0X>, + <&cmu_disp CLK_ACLK_SMMU_DECON1X>, + <&cmu_disp CLK_ACLK_XIU_DECON1X>, + <&cmu_disp CLK_PCLK_SMMU_DECON1X>, + <&cmu_disp CLK_SCLK_DECON_VCLK>, + <&cmu_disp CLK_SCLK_DECON_ECLK>; + clock-names = "aclk_decon", "aclk_smmu_decon0x", "aclk_xiu_decon0x", + "pclk_smmu_decon0x", "aclk_smmu_decon1x", "aclk_xiu_decon1x", + "pclk_smmu_decon1x", "sclk_decon_vclk", "sclk_decon_eclk"; + interrupt-names = "vsync", "lcd_sys"; + interrupts = <0 202 0>, <0 203 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + decon_to_mic: endpoint { + remote-endpoint = <&mic_to_decon>; + }; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/display/exynos/exynos7-decon.txt b/Documentation/devicetree/bindings/display/exynos/exynos7-decon.txt new file mode 100644 index 000000000..53912c99e --- /dev/null +++ b/Documentation/devicetree/bindings/display/exynos/exynos7-decon.txt @@ -0,0 +1,65 @@ +Device-Tree bindings for Samsung Exynos7 SoC display controller (DECON) + +DECON (Display and Enhancement Controller) is the Display Controller for the +Exynos7 series of SoCs which transfers the image data from a video memory +buffer to an external LCD interface. + +Required properties: +- compatible: value should be "samsung,exynos7-decon"; + +- reg: physical base address and length of the DECON registers set. + +- interrupts: should contain a list of all DECON IP block interrupts in the + order: FIFO Level, VSYNC, LCD_SYSTEM. The interrupt specifier + format depends on the interrupt controller used. + +- interrupt-names: should contain the interrupt names: "fifo", "vsync", + "lcd_sys", in the same order as they were listed in the interrupts + property. + +- pinctrl-0: pin control group to be used for this controller. + +- pinctrl-names: must contain a "default" entry. + +- clocks: must include clock specifiers corresponding to entries in the + clock-names property. + +- clock-names: list of clock names sorted in the same order as the clocks + property. Must contain "pclk_decon0", "aclk_decon0", + "decon0_eclk", "decon0_vclk". +- i80-if-timings: timing configuration for lcd i80 interface support. + +Optional Properties: +- power-domains: a phandle to DECON power domain node. +- display-timings: timing settings for DECON, as described in document [1]. + Can be used in case timings cannot be provided otherwise + or to override timings provided by the panel. + +[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt + +Example: + +SoC specific DT entry: + + decon@13930000 { + compatible = "samsung,exynos7-decon"; + interrupt-parent = <&combiner>; + reg = <0x13930000 0x1000>; + interrupt-names = "lcd_sys", "vsync", "fifo"; + interrupts = <0 188 0>, <0 189 0>, <0 190 0>; + clocks = <&clock_disp PCLK_DECON_INT>, + <&clock_disp ACLK_DECON_INT>, + <&clock_disp SCLK_DECON_INT_ECLK>, + <&clock_disp SCLK_DECON_INT_EXTCLKPLL>; + clock-names = "pclk_decon0", "aclk_decon0", "decon0_eclk", + "decon0_vclk"; + status = "disabled"; + }; + +Board specific DT entry: + + decon@13930000 { + pinctrl-0 = <&lcd_clk &pwm1_out>; + pinctrl-names = "default"; + status = "okay"; + }; diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt new file mode 100644 index 000000000..9b6cba3f8 --- /dev/null +++ b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt @@ -0,0 +1,112 @@ +The Exynos display port interface should be configured based on +the type of panel connected to it. + +We use two nodes: + -dp-controller node + -dptx-phy node(defined inside dp-controller node) + +For the DP-PHY initialization, we use the dptx-phy node. +Required properties for dptx-phy: deprecated, use phys and phy-names + -reg: deprecated + Base address of DP PHY register. + -samsung,enable-mask: deprecated + The bit-mask used to enable/disable DP PHY. + +For the Panel initialization, we read data from dp-controller node. +Required properties for dp-controller: + -compatible: + should be "samsung,exynos5-dp". + -reg: + physical base address of the controller and length + of memory mapped region. + -interrupts: + interrupt combiner values. + -clocks: + from common clock binding: handle to dp clock. + -clock-names: + from common clock binding: Shall be "dp". + -phys: + from general PHY binding: the phandle for the PHY device. + -phy-names: + from general PHY binding: Should be "dp". + +Optional properties for dp-controller: + -interlaced: + interlace scan mode. + Progressive if defined, Interlaced if not defined + -vsync-active-high: + VSYNC polarity configuration. + High if defined, Low if not defined + -hsync-active-high: + HSYNC polarity configuration. + High if defined, Low if not defined + -samsung,hpd-gpio: + Hotplug detect GPIO. + Indicates which GPIO should be used for hotplug + detection + -video interfaces: Device node can contain video interface port + nodes according to [1]. + - display-timings: timings for the connected panel as described by + Documentation/devicetree/bindings/display/panel/display-timing.txt + +For the below properties, please refer to Analogix DP binding document: + * Documentation/devicetree/bindings/display/bridge/analogix_dp.txt + -phys (required) + -phy-names (required) + -hpd-gpios (optional) + force-hpd (optional) + +Deprecated properties for DisplayPort: +-interlaced: deprecated prop that can parsed from drm_display_mode. +-vsync-active-high: deprecated prop that can parsed from drm_display_mode. +-hsync-active-high: deprecated prop that can parsed from drm_display_mode. +-samsung,ycbcr-coeff: deprecated prop that can parsed from drm_display_mode. +-samsung,dynamic-range: deprecated prop that can parsed from drm_display_mode. +-samsung,color-space: deprecated prop that can parsed from drm_display_info. +-samsung,color-depth: deprecated prop that can parsed from drm_display_info. +-samsung,link-rate: deprecated prop that can reading from monitor by dpcd method. +-samsung,lane-count: deprecated prop that can reading from monitor by dpcd method. +-samsung,hpd-gpio: deprecated name for hpd-gpios. + +------------------------------------------------------------------------------- + +Example: + +SOC specific portion: + dp-controller { + compatible = "samsung,exynos5-dp"; + reg = <0x145b0000 0x10000>; + interrupts = <10 3>; + interrupt-parent = <&combiner>; + clocks = <&clock 342>; + clock-names = "dp"; + + phys = <&dp_phy>; + phy-names = "dp"; + }; + +Board Specific portion: + dp-controller { + display-timings { + native-mode = <&lcd_timing>; + lcd_timing: 1366x768 { + clock-frequency = <70589280>; + hactive = <1366>; + vactive = <768>; + hfront-porch = <40>; + hback-porch = <40>; + hsync-len = <32>; + vback-porch = <10>; + vfront-porch = <12>; + vsync-len = <6>; + }; + }; + + ports { + port@0 { + dp_out: endpoint { + remote-endpoint = <&bridge_in>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt b/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt new file mode 100644 index 000000000..be377786e --- /dev/null +++ b/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt @@ -0,0 +1,90 @@ +Exynos MIPI DSI Master + +Required properties: + - compatible: value should be one of the following + "samsung,exynos3250-mipi-dsi" /* for Exynos3250/3472 SoCs */ + "samsung,exynos4210-mipi-dsi" /* for Exynos4 SoCs */ + "samsung,exynos5410-mipi-dsi" /* for Exynos5410/5420/5440 SoCs */ + "samsung,exynos5422-mipi-dsi" /* for Exynos5422/5800 SoCs */ + "samsung,exynos5433-mipi-dsi" /* for Exynos5433 SoCs */ + - reg: physical base address and length of the registers set for the device + - interrupts: should contain DSI interrupt + - clocks: list of clock specifiers, must contain an entry for each required + entry in clock-names + - clock-names: should include "bus_clk"and "sclk_mipi" entries + the use of "pll_clk" is deprecated + - phys: list of phy specifiers, must contain an entry for each required + entry in phy-names + - phy-names: should include "dsim" entry + - vddcore-supply: MIPI DSIM Core voltage supply (e.g. 1.1V) + - vddio-supply: MIPI DSIM I/O and PLL voltage supply (e.g. 1.8V) + - samsung,pll-clock-frequency: specifies frequency of the oscillator clock + - #address-cells, #size-cells: should be set respectively to <1> and <0> + according to DSI host bindings (see MIPI DSI bindings [1]) + - samsung,burst-clock-frequency: specifies DSI frequency in high-speed burst + mode + - samsung,esc-clock-frequency: specifies DSI frequency in escape mode + +Optional properties: + - power-domains: a phandle to DSIM power domain node + +Child nodes: + Should contain DSI peripheral nodes (see MIPI DSI bindings [1]). + +Video interfaces: + Device node can contain following video interface port nodes according to [2]: + 0: RGB input, + 1: DSI output + +[1]: Documentation/devicetree/bindings/display/mipi-dsi-bus.txt +[2]: Documentation/devicetree/bindings/media/video-interfaces.txt + +Example: + + dsi@11c80000 { + compatible = "samsung,exynos4210-mipi-dsi"; + reg = <0x11C80000 0x10000>; + interrupts = <0 79 0>; + clocks = <&clock 286>, <&clock 143>; + clock-names = "bus_clk", "sclk_mipi"; + phys = <&mipi_phy 1>; + phy-names = "dsim"; + vddcore-supply = <&vusb_reg>; + vddio-supply = <&vmipi_reg>; + power-domains = <&pd_lcd0>; + #address-cells = <1>; + #size-cells = <0>; + samsung,pll-clock-frequency = <24000000>; + + panel@1 { + reg = <0>; + ... + port { + panel_ep: endpoint { + remote-endpoint = <&dsi_ep>; + }; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + decon_to_mic: endpoint { + remote-endpoint = <&mic_to_decon>; + }; + }; + + port@1 { + reg = <1>; + dsi_ep: endpoint { + reg = <0>; + samsung,burst-clock-frequency = <500000000>; + samsung,esc-clock-frequency = <20000000>; + remote-endpoint = <&panel_ep>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt b/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt new file mode 100644 index 000000000..58b12e25b --- /dev/null +++ b/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt @@ -0,0 +1,64 @@ +Device-Tree bindings for drm hdmi driver + +Required properties: +- compatible: value should be one among the following: + 1) "samsung,exynos4210-hdmi" + 2) "samsung,exynos4212-hdmi" + 3) "samsung,exynos5420-hdmi" + 4) "samsung,exynos5433-hdmi" +- reg: physical base address of the hdmi and length of memory mapped + region. +- interrupts: interrupt number to the cpu. +- hpd-gpios: following information about the hotplug gpio pin. + a) phandle of the gpio controller node. + b) pin number within the gpio controller. + c) optional flags and pull up/down. +- ddc: phandle to the hdmi ddc node +- phy: phandle to the hdmi phy node +- samsung,syscon-phandle: phandle for system controller node for PMU. +- #sound-dai-cells: should be 0. + +Required properties for Exynos 4210, 4212, 5420 and 5433: +- clocks: list of clock IDs from SoC clock driver. + a) hdmi: Gate of HDMI IP bus clock. + b) sclk_hdmi: Gate of HDMI special clock. + c) sclk_pixel: Pixel special clock, one of the two possible inputs of + HDMI clock mux. + d) sclk_hdmiphy: HDMI PHY clock output, one of two possible inputs of + HDMI clock mux. + e) mout_hdmi: It is required by the driver to switch between the 2 + parents i.e. sclk_pixel and sclk_hdmiphy. If hdmiphy is stable + after configuration, parent is set to sclk_hdmiphy else + sclk_pixel. +- clock-names: aliases as per driver requirements for above clock IDs: + "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy" and "mout_hdmi". + +Required properties for Exynos 5433: +- clocks: list of clock specifiers according to common clock bindings. + a) hdmi_pclk: Gate of HDMI IP APB bus. + b) hdmi_i_pclk: Gate of HDMI-PHY IP APB bus. + d) i_tmds_clk: Gate of HDMI TMDS clock. + e) i_pixel_clk: Gate of HDMI pixel clock. + f) i_spdif_clk: Gate of HDMI SPDIF clock. + g) oscclk: Oscillator clock, used as parent of following *_user clocks + in case HDMI-PHY is not operational. + h) tmds_clko: TMDS clock generated by HDMI-PHY. + i) tmds_clko_user: MUX used to switch between oscclk and tmds_clko, + respectively if HDMI-PHY is off and operational. + j) pixel_clko: Pixel clock generated by HDMI-PHY. + k) pixel_clko_user: MUX used to switch between oscclk and pixel_clko, + respectively if HDMI-PHY is off and operational. +- clock-names: aliases for above clock specfiers. +- samsung,sysreg: handle to syscon used to control the system registers. + +Example: + + hdmi { + compatible = "samsung,exynos4212-hdmi"; + reg = <0x14530000 0x100000>; + interrupts = <0 95 0>; + hpd-gpios = <&gpx3 7 1>; + ddc = <&hdmi_ddc_node>; + phy = <&hdmi_phy_node>; + samsung,syscon-phandle = <&pmu_system_controller>; + }; diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_hdmiddc.txt b/Documentation/devicetree/bindings/display/exynos/exynos_hdmiddc.txt new file mode 100644 index 000000000..41eee9715 --- /dev/null +++ b/Documentation/devicetree/bindings/display/exynos/exynos_hdmiddc.txt @@ -0,0 +1,15 @@ +Device-Tree bindings for hdmiddc driver + +Required properties: +- compatible: value should be one of the following + 1) "samsung,exynos5-hdmiddc" <DEPRECATED> + 2) "samsung,exynos4210-hdmiddc" + +- reg: I2C address of the hdmiddc device. + +Example: + + hdmiddc { + compatible = "samsung,exynos4210-hdmiddc"; + reg = <0x50>; + }; diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_hdmiphy.txt b/Documentation/devicetree/bindings/display/exynos/exynos_hdmiphy.txt new file mode 100644 index 000000000..162f641f7 --- /dev/null +++ b/Documentation/devicetree/bindings/display/exynos/exynos_hdmiphy.txt @@ -0,0 +1,15 @@ +Device-Tree bindings for hdmiphy driver + +Required properties: +- compatible: value should be one of the following: + 1) "samsung,exynos5-hdmiphy" <DEPRECATED> + 2) "samsung,exynos4210-hdmiphy". + 3) "samsung,exynos4212-hdmiphy". +- reg: I2C address of the hdmiphy device. + +Example: + + hdmiphy { + compatible = "samsung,exynos4210-hdmiphy"; + reg = <0x38>; + }; diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_mixer.txt b/Documentation/devicetree/bindings/display/exynos/exynos_mixer.txt new file mode 100644 index 000000000..3e38128f8 --- /dev/null +++ b/Documentation/devicetree/bindings/display/exynos/exynos_mixer.txt @@ -0,0 +1,26 @@ +Device-Tree bindings for mixer driver + +Required properties: +- compatible: value should be one of the following: + 1) "samsung,exynos5-mixer" <DEPRECATED> + 2) "samsung,exynos4210-mixer" + 3) "samsung,exynos4212-mixer" + 4) "samsung,exynos5250-mixer" + 5) "samsung,exynos5420-mixer" + +- reg: physical base address of the mixer and length of memory mapped + region. +- interrupts: interrupt number to the cpu. +- clocks: list of clock IDs from SoC clock driver. + a) mixer: Gate of Mixer IP bus clock. + b) sclk_hdmi: HDMI Special clock, one of the two possible inputs of + mixer mux. + c) hdmi: Gate of HDMI IP bus clock, needed together with sclk_hdmi. + +Example: + + mixer { + compatible = "samsung,exynos5250-mixer"; + reg = <0x14450000 0x10000>; + interrupts = <0 94 0>; + }; diff --git a/Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt b/Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt new file mode 100644 index 000000000..b3096421d --- /dev/null +++ b/Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt @@ -0,0 +1,107 @@ +Device-Tree bindings for Samsung SoC display controller (FIMD) + +FIMD (Fully Interactive Mobile Display) is the Display Controller for the +Samsung series of SoCs which transfers the image data from a video memory +buffer to an external LCD interface. + +Required properties: +- compatible: value should be one of the following + "samsung,s3c2443-fimd"; /* for S3C24XX SoCs */ + "samsung,s3c6400-fimd"; /* for S3C64XX SoCs */ + "samsung,s5pv210-fimd"; /* for S5PV210 SoC */ + "samsung,exynos3250-fimd"; /* for Exynos3250/3472 SoCs */ + "samsung,exynos4210-fimd"; /* for Exynos4 SoCs */ + "samsung,exynos5250-fimd"; /* for Exynos5250 SoCs */ + "samsung,exynos5420-fimd"; /* for Exynos5420/5422/5800 SoCs */ + +- reg: physical base address and length of the FIMD registers set. + +- interrupts: should contain a list of all FIMD IP block interrupts in the + order: FIFO Level, VSYNC, LCD_SYSTEM. The interrupt specifier + format depends on the interrupt controller used. + +- interrupt-names: should contain the interrupt names: "fifo", "vsync", + "lcd_sys", in the same order as they were listed in the interrupts + property. + +- pinctrl-0: pin control group to be used for this controller. + +- pinctrl-names: must contain a "default" entry. + +- clocks: must include clock specifiers corresponding to entries in the + clock-names property. + +- clock-names: list of clock names sorted in the same order as the clocks + property. Must contain "sclk_fimd" and "fimd". + +Optional Properties: +- power-domains: a phandle to FIMD power domain node. +- samsung,invert-vden: video enable signal is inverted +- samsung,invert-vclk: video clock signal is inverted +- display-timings: timing settings for FIMD, as described in document [1]. + Can be used in case timings cannot be provided otherwise + or to override timings provided by the panel. +- samsung,sysreg: handle to syscon used to control the system registers +- i80-if-timings: timing configuration for lcd i80 interface support. + - cs-setup: clock cycles for the active period of address signal is enabled + until chip select is enabled. + If not specified, the default value(0) will be used. + - wr-setup: clock cycles for the active period of CS signal is enabled until + write signal is enabled. + If not specified, the default value(0) will be used. + - wr-active: clock cycles for the active period of CS is enabled. + If not specified, the default value(1) will be used. + - wr-hold: clock cycles for the active period of CS is disabled until write + signal is disabled. + If not specified, the default value(0) will be used. + + The parameters are defined as: + + VCLK(internal) __|??????|_____|??????|_____|??????|_____|??????|_____|?? + : : : : : + Address Output --:<XXXXXXXXXXX:XXXXXXXXXXXX:XXXXXXXXXXXX:XXXXXXXXXXXX:XX + | cs-setup+1 | : : : + |<---------->| : : : + Chip Select ???????????????|____________:____________:____________|?? + | wr-setup+1 | | wr-hold+1 | + |<---------->| |<---------->| + Write Enable ????????????????????????????|____________|??????????????? + | wr-active+1| + |<---------->| + Video Data ----------------------------<XXXXXXXXXXXXXXXXXXXXXXXXX>-- + +The device node can contain 'port' child nodes according to the bindings defined +in [2]. The following are properties specific to those nodes: +- reg: (required) port index, can be: + 0 - for CAMIF0 input, + 1 - for CAMIF1 input, + 2 - for CAMIF2 input, + 3 - for parallel output, + 4 - for write-back interface + +[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt +[2]: Documentation/devicetree/bindings/media/video-interfaces.txt + +Example: + +SoC specific DT entry: + + fimd@11c00000 { + compatible = "samsung,exynos4210-fimd"; + interrupt-parent = <&combiner>; + reg = <0x11c00000 0x20000>; + interrupt-names = "fifo", "vsync", "lcd_sys"; + interrupts = <11 0>, <11 1>, <11 2>; + clocks = <&clock 140>, <&clock 283>; + clock-names = "sclk_fimd", "fimd"; + power-domains = <&pd_lcd0>; + status = "disabled"; + }; + +Board specific DT entry: + + fimd@11c00000 { + pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>; + pinctrl-names = "default"; + status = "okay"; + }; diff --git a/Documentation/devicetree/bindings/display/faraday,tve200.txt b/Documentation/devicetree/bindings/display/faraday,tve200.txt new file mode 100644 index 000000000..82e3bc0b7 --- /dev/null +++ b/Documentation/devicetree/bindings/display/faraday,tve200.txt @@ -0,0 +1,54 @@ +* Faraday TV Encoder TVE200 + +Required properties: + +- compatible: must be one of: + "faraday,tve200" + "cortina,gemini-tvc", "faraday,tve200" + +- reg: base address and size of the control registers block + +- interrupts: contains an interrupt specifier for the interrupt + line from the TVE200 + +- clock-names: should contain "PCLK" for the clock line clocking the + silicon and "TVE" for the 27MHz clock to the video driver + +- clocks: contains phandle and clock specifier pairs for the entries + in the clock-names property. See + Documentation/devicetree/bindings/clock/clock-bindings.txt + +Optional properties: + +- resets: contains the reset line phandle for the block + +Required sub-nodes: + +- port: describes LCD panel signals, following the common binding + for video transmitter interfaces; see + Documentation/devicetree/bindings/media/video-interfaces.txt + This port should have the properties: + reg = <0>; + It should have one endpoint connected to a remote endpoint where + the display is connected. + +Example: + +display-controller@6a000000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "faraday,tve200"; + reg = <0x6a000000 0x1000>; + interrupts = <13 IRQ_TYPE_EDGE_RISING>; + resets = <&syscon GEMINI_RESET_TVC>; + clocks = <&syscon GEMINI_CLK_GATE_TVC>, + <&syscon GEMINI_CLK_TVC>; + clock-names = "PCLK", "TVE"; + + port@0 { + reg = <0>; + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/display/fsl,dcu.txt b/Documentation/devicetree/bindings/display/fsl,dcu.txt new file mode 100644 index 000000000..63ec2a624 --- /dev/null +++ b/Documentation/devicetree/bindings/display/fsl,dcu.txt @@ -0,0 +1,34 @@ +Device Tree bindings for Freescale DCU DRM Driver + +Required properties: +- compatible: Should be one of + * "fsl,ls1021a-dcu". + * "fsl,vf610-dcu". + +- reg: Address and length of the register set for dcu. +- clocks: Handle to "dcu" and "pix" clock (in the order below) + This can be the same clock (e.g. LS1021a) + See ../clocks/clock-bindings.txt for details. +- clock-names: Should be "dcu" and "pix" + See ../clocks/clock-bindings.txt for details. +- big-endian Boolean property, LS1021A DCU registers are big-endian. +- port Video port for the panel output + +Optional properties: +- fsl,tcon: The phandle to the timing controller node. + +Examples: +dcu: dcu@2ce0000 { + compatible = "fsl,ls1021a-dcu"; + reg = <0x0 0x2ce0000 0x0 0x10000>; + clocks = <&platform_clk 0>, <&platform_clk 0>; + clock-names = "dcu", "pix"; + big-endian; + fsl,tcon = <&tcon>; + + port { + dcu_out: endpoint { + remote-endpoint = <&panel_out>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/display/fsl,tcon.txt b/Documentation/devicetree/bindings/display/fsl,tcon.txt new file mode 100644 index 000000000..475008747 --- /dev/null +++ b/Documentation/devicetree/bindings/display/fsl,tcon.txt @@ -0,0 +1,17 @@ +Device Tree bindings for Freescale TCON Driver + +Required properties: +- compatible: Should be one of + * "fsl,vf610-tcon". + +- reg: Address and length of the register set for tcon. +- clocks: From common clock binding: handle to tcon ipg clock. +- clock-names: From common clock binding: Shall be "ipg". + +Examples: +timing-controller@4003d000 { + compatible = "fsl,vf610-tcon"; + reg = <0x4003d000 0x1000>; + clocks = <&clks VF610_CLK_TCON0>; + clock-names = "ipg"; +}; diff --git a/Documentation/devicetree/bindings/display/google,goldfish-fb.txt b/Documentation/devicetree/bindings/display/google,goldfish-fb.txt new file mode 100644 index 000000000..751fa9f51 --- /dev/null +++ b/Documentation/devicetree/bindings/display/google,goldfish-fb.txt @@ -0,0 +1,17 @@ +Android Goldfish framebuffer + +Android Goldfish framebuffer device used by Android emulator. + +Required properties: + +- compatible : should contain "google,goldfish-fb" +- reg : <registers mapping> +- interrupts : <interrupt mapping> + +Example: + + display-controller@1f008000 { + compatible = "google,goldfish-fb"; + interrupts = <0x10>; + reg = <0x1f008000 0x100>; + }; diff --git a/Documentation/devicetree/bindings/display/himax,hx8357d.txt b/Documentation/devicetree/bindings/display/himax,hx8357d.txt new file mode 100644 index 000000000..e641f6647 --- /dev/null +++ b/Documentation/devicetree/bindings/display/himax,hx8357d.txt @@ -0,0 +1,26 @@ +Himax HX8357D display panels + +This binding is for display panels using a Himax HX8357D controller in SPI +mode, such as the Adafruit 3.5" TFT for Raspberry Pi. + +Required properties: +- compatible: "adafruit,yx350hv15", "himax,hx8357d" +- dc-gpios: D/C pin +- reg: address of the panel on the SPI bus + +The node for this driver must be a child node of a SPI controller, hence +all mandatory properties described in ../spi/spi-bus.txt must be specified. + +Optional properties: +- rotation: panel rotation in degrees counter clockwise (0,90,180,270) +- backlight: phandle of the backlight device attached to the panel + +Example: + display@0{ + compatible = "adafruit,yx350hv15", "himax,hx8357d"; + reg = <0>; + spi-max-frequency = <32000000>; + dc-gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>; + rotation = <90>; + backlight = <&backlight>; + }; diff --git a/Documentation/devicetree/bindings/display/hisilicon/dw-dsi.txt b/Documentation/devicetree/bindings/display/hisilicon/dw-dsi.txt new file mode 100644 index 000000000..d270bfe4e --- /dev/null +++ b/Documentation/devicetree/bindings/display/hisilicon/dw-dsi.txt @@ -0,0 +1,72 @@ +Device-Tree bindings for DesignWare DSI Host Controller v1.20a driver + +A DSI Host Controller resides in the middle of display controller and external +HDMI converter or panel. + +Required properties: +- compatible: value should be "hisilicon,hi6220-dsi". +- reg: physical base address and length of dsi controller's registers. +- clocks: contains APB clock phandle + clock-specifier pair. +- clock-names: should be "pclk". +- ports: contains DSI controller input and output sub port. + The input port connects to ADE output port with the reg value "0". + The output port with the reg value "1", it could connect to panel or + any other bridge endpoints. + See Documentation/devicetree/bindings/graph.txt for more device graph info. + +A example of HiKey board hi6220 SoC and board specific DT entry: +Example: + +SoC specific: + dsi: dsi@f4107800 { + compatible = "hisilicon,hi6220-dsi"; + reg = <0x0 0xf4107800 0x0 0x100>; + clocks = <&media_ctrl HI6220_DSI_PCLK>; + clock-names = "pclk"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* 0 for input port */ + port@0 { + reg = <0>; + dsi_in: endpoint { + remote-endpoint = <&ade_out>; + }; + }; + }; + }; + + +Board specific: + &dsi { + status = "ok"; + + ports { + /* 1 for output port */ + port@1 { + reg = <1>; + + dsi_out0: endpoint@0 { + remote-endpoint = <&adv7533_in>; + }; + }; + }; + }; + + &i2c2 { + ... + + adv7533: adv7533@39 { + ... + + port { + adv7533_in: endpoint { + remote-endpoint = <&dsi_out0>; + }; + }; + }; + }; + diff --git a/Documentation/devicetree/bindings/display/hisilicon/hisi-ade.txt b/Documentation/devicetree/bindings/display/hisilicon/hisi-ade.txt new file mode 100644 index 000000000..305a0e72a --- /dev/null +++ b/Documentation/devicetree/bindings/display/hisilicon/hisi-ade.txt @@ -0,0 +1,64 @@ +Device-Tree bindings for hisilicon ADE display controller driver + +ADE (Advanced Display Engine) is the display controller which grab image +data from memory, do composition, do post image processing, generate RGB +timing stream and transfer to DSI. + +Required properties: +- compatible: value should be "hisilicon,hi6220-ade". +- reg: physical base address and length of the ADE controller's registers. +- hisilicon,noc-syscon: ADE NOC QoS syscon. +- resets: The ADE reset controller node. +- interrupt: the ldi vblank interrupt number used. +- clocks: a list of phandle + clock-specifier pairs, one for each entry + in clock-names. +- clock-names: should contain: + "clk_ade_core" for the ADE core clock. + "clk_codec_jpeg" for the media NOC QoS clock, which use the same clock with + jpeg codec. + "clk_ade_pix" for the ADE pixel clock. +- assigned-clocks: Should contain "clk_ade_core" and "clk_codec_jpeg" clocks' + phandle + clock-specifier pairs. +- assigned-clock-rates: clock rates, one for each entry in assigned-clocks. + The rate of "clk_ade_core" could be "360000000" or "180000000"; + The rate of "clk_codec_jpeg" could be or less than "1440000000". + These rate values could be configured according to performance and power + consumption. +- port: the output port. This contains one endpoint subnode, with its + remote-endpoint set to the phandle of the connected DSI input endpoint. + See Documentation/devicetree/bindings/graph.txt for more device graph info. + +Optional properties: +- dma-coherent: Present if dma operations are coherent. + + +A example of HiKey board hi6220 SoC specific DT entry: +Example: + + ade: ade@f4100000 { + compatible = "hisilicon,hi6220-ade"; + reg = <0x0 0xf4100000 0x0 0x7800>; + reg-names = "ade_base"; + hisilicon,noc-syscon = <&medianoc_ade>; + resets = <&media_ctrl MEDIA_ADE>; + interrupts = <0 115 4>; /* ldi interrupt */ + + clocks = <&media_ctrl HI6220_ADE_CORE>, + <&media_ctrl HI6220_CODEC_JPEG>, + <&media_ctrl HI6220_ADE_PIX_SRC>; + /*clock name*/ + clock-names = "clk_ade_core", + "clk_codec_jpeg", + "clk_ade_pix"; + + assigned-clocks = <&media_ctrl HI6220_ADE_CORE>, + <&media_ctrl HI6220_CODEC_JPEG>; + assigned-clock-rates = <360000000>, <288000000>; + dma-coherent; + + port { + ade_out: endpoint { + remote-endpoint = <&dsi_in>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/ht16k33.txt b/Documentation/devicetree/bindings/display/ht16k33.txt new file mode 100644 index 000000000..d5a8b070b --- /dev/null +++ b/Documentation/devicetree/bindings/display/ht16k33.txt @@ -0,0 +1,40 @@ +Holtek ht16k33 RAM mapping 16*8 LED controller driver with keyscan +------------------------------------------------------------------------------- + +Required properties: +- compatible: "holtek,ht16k33" +- reg: I2C slave address of the chip. +- interrupts: Interrupt specification for the key pressed interrupt. +- refresh-rate-hz: Display update interval in HZ. +- debounce-delay-ms: Debouncing interval time in milliseconds. +- linux,keymap: The keymap for keys as described in the binding + document (devicetree/bindings/input/matrix-keymap.txt). + +Optional properties: +- linux,no-autorepeat: Disable keyrepeat. +- default-brightness-level: Initial brightness level [0-15] (default: 15). + +Example: + +&i2c1 { + ht16k33: ht16k33@70 { + compatible = "holtek,ht16k33"; + reg = <0x70>; + refresh-rate-hz = <20>; + debounce-delay-ms = <50>; + interrupt-parent = <&gpio4>; + interrupts = <5 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>; + linux,keymap = < + MATRIX_KEY(2, 0, KEY_F6) + MATRIX_KEY(3, 0, KEY_F8) + MATRIX_KEY(4, 0, KEY_F10) + MATRIX_KEY(5, 0, KEY_F4) + MATRIX_KEY(6, 0, KEY_F2) + MATRIX_KEY(2, 1, KEY_F5) + MATRIX_KEY(3, 1, KEY_F7) + MATRIX_KEY(4, 1, KEY_F9) + MATRIX_KEY(5, 1, KEY_F3) + MATRIX_KEY(6, 1, KEY_F1) + >; + }; +}; diff --git a/Documentation/devicetree/bindings/display/ilitek,ili9225.txt b/Documentation/devicetree/bindings/display/ilitek,ili9225.txt new file mode 100644 index 000000000..a59feb520 --- /dev/null +++ b/Documentation/devicetree/bindings/display/ilitek,ili9225.txt @@ -0,0 +1,25 @@ +Ilitek ILI9225 display panels + +This binding is for display panels using an Ilitek ILI9225 controller in SPI +mode. + +Required properties: +- compatible: "vot,v220hf01a-t", "ilitek,ili9225" +- rs-gpios: Register select signal +- reset-gpios: Reset pin + +The node for this driver must be a child node of a SPI controller, hence +all mandatory properties described in ../spi/spi-bus.txt must be specified. + +Optional properties: +- rotation: panel rotation in degrees counter clockwise (0,90,180,270) + +Example: + display@0{ + compatible = "vot,v220hf01a-t", "ilitek,ili9225"; + reg = <0>; + spi-max-frequency = <12000000>; + rs-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; + rotation = <270>; + }; diff --git a/Documentation/devicetree/bindings/display/ilitek,ili9341.txt b/Documentation/devicetree/bindings/display/ilitek,ili9341.txt new file mode 100644 index 000000000..169b32e4e --- /dev/null +++ b/Documentation/devicetree/bindings/display/ilitek,ili9341.txt @@ -0,0 +1,27 @@ +Ilitek ILI9341 display panels + +This binding is for display panels using an Ilitek ILI9341 controller in SPI +mode. + +Required properties: +- compatible: "adafruit,yx240qv29", "ilitek,ili9341" +- dc-gpios: D/C pin +- reset-gpios: Reset pin + +The node for this driver must be a child node of a SPI controller, hence +all mandatory properties described in ../spi/spi-bus.txt must be specified. + +Optional properties: +- rotation: panel rotation in degrees counter clockwise (0,90,180,270) +- backlight: phandle of the backlight device attached to the panel + +Example: + display@0{ + compatible = "adafruit,yx240qv29", "ilitek,ili9341"; + reg = <0>; + spi-max-frequency = <32000000>; + dc-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; + rotation = <270>; + backlight = <&backlight>; + }; diff --git a/Documentation/devicetree/bindings/display/ilitek,ili9486.yaml b/Documentation/devicetree/bindings/display/ilitek,ili9486.yaml new file mode 100644 index 000000000..aecff34f5 --- /dev/null +++ b/Documentation/devicetree/bindings/display/ilitek,ili9486.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/ilitek,ili9486.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ilitek ILI9486 display panels device tree bindings + +maintainers: + - Kamlesh Gurudasani <kamlesh.gurudasani@gmail.com> + +description: + This binding is for display panels using an Ilitek ILI9486 controller in SPI + mode. + +allOf: + - $ref: panel/panel-common.yaml# + +properties: + compatible: + items: + - enum: + # Waveshare 3.5" 320x480 Color TFT LCD + - waveshare,rpi-lcd-35 + # Ozzmaker 3.5" 320x480 Color TFT LCD + - ozzmaker,piscreen + - const: ilitek,ili9486 + + spi-max-frequency: + maximum: 32000000 + + dc-gpios: + maxItems: 1 + description: Display data/command selection (D/CX) + + backlight: true + reg: true + reset-gpios: true + rotation: true + +required: + - compatible + - reg + - dc-gpios + - reset-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + backlight: backlight { + compatible = "gpio-backlight"; + gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; + }; + spi { + #address-cells = <1>; + #size-cells = <0>; + + + display@0{ + compatible = "waveshare,rpi-lcd-35", "ilitek,ili9486"; + reg = <0>; + spi-max-frequency = <32000000>; + dc-gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>; + rotation = <180>; + backlight = <&backlight>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt b/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt new file mode 100644 index 000000000..f4df9e83b --- /dev/null +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt @@ -0,0 +1,57 @@ +Freescale imx21 Framebuffer + +This framebuffer driver supports devices imx1, imx21, imx25, and imx27. + +Required properties: +- compatible : "fsl,<chip>-fb", chip should be imx1 or imx21 +- reg : Should contain 1 register ranges(address and length) +- interrupts : One interrupt of the fb dev + +Required nodes: +- display: Phandle to a display node as described in + Documentation/devicetree/bindings/display/panel/display-timing.txt + Additional, the display node has to define properties: + - bits-per-pixel: Bits per pixel + - fsl,pcr: LCDC PCR value + A display node may optionally define + - fsl,aus-mode: boolean to enable AUS mode (only for imx21) + +Optional properties: +- lcd-supply: Regulator for LCD supply voltage. +- fsl,dmacr: DMA Control Register value. This is optional. By default, the + register is not modified as recommended by the datasheet. +- fsl,lpccr: Contrast Control Register value. This property provides the + default value for the contrast control register. + If that property is omitted, the register is zeroed. +- fsl,lscr1: LCDC Sharp Configuration Register value. + +Example: + + imxfb: fb@10021000 { + compatible = "fsl,imx21-fb"; + interrupts = <61>; + reg = <0x10021000 0x1000>; + display = <&display0>; + }; + + ... + + display0: display0 { + model = "Primeview-PD050VL1"; + bits-per-pixel = <16>; + fsl,pcr = <0xf0c88080>; /* non-standard but required */ + display-timings { + native-mode = <&timing_disp0>; + timing_disp0: 640x480 { + hactive = <640>; + vactive = <480>; + hback-porch = <112>; + hfront-porch = <36>; + hsync-len = <32>; + vback-porch = <33>; + vfront-porch = <33>; + vsync-len = <2>; + clock-frequency = <25000000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt b/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt new file mode 100644 index 000000000..5a99490c1 --- /dev/null +++ b/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt @@ -0,0 +1,162 @@ +Freescale i.MX DRM master device +================================ + +The freescale i.MX DRM master device is a virtual device needed to list all +IPU or other display interface nodes that comprise the graphics subsystem. + +Required properties: +- compatible: Should be "fsl,imx-display-subsystem" +- ports: Should contain a list of phandles pointing to display interface ports + of IPU devices + +example: + +display-subsystem { + compatible = "fsl,display-subsystem"; + ports = <&ipu_di0>; +}; + + +Freescale i.MX IPUv3 +==================== + +Required properties: +- compatible: Should be "fsl,<chip>-ipu" where <chip> is one of + - imx51 + - imx53 + - imx6q + - imx6qp +- reg: should be register base and length as documented in the + datasheet +- interrupts: Should contain sync interrupt and error interrupt, + in this order. +- resets: phandle pointing to the system reset controller and + reset line index, see reset/fsl,imx-src.txt for details +Additional required properties for fsl,imx6qp-ipu: +- fsl,prg: phandle to prg node associated with this IPU instance +Optional properties: +- port@[0-3]: Port nodes with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + Ports 0 and 1 should correspond to CSI0 and CSI1, + ports 2 and 3 should correspond to DI0 and DI1, respectively. + +example: + +ipu: ipu@18000000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx53-ipu"; + reg = <0x18000000 0x080000000>; + interrupts = <11 10>; + resets = <&src 2>; + + ipu_di0: port@2 { + reg = <2>; + + ipu_di0_disp0: endpoint { + remote-endpoint = <&display_in>; + }; + }; +}; + +Freescale i.MX PRE (Prefetch Resolve Engine) +============================================ + +Required properties: +- compatible: should be "fsl,imx6qp-pre" +- reg: should be register base and length as documented in the + datasheet +- clocks : phandle to the PRE axi clock input, as described + in Documentation/devicetree/bindings/clock/clock-bindings.txt and + Documentation/devicetree/bindings/clock/imx6q-clock.yaml. +- clock-names: should be "axi" +- interrupts: should contain the PRE interrupt +- fsl,iram: phandle pointing to the mmio-sram device node, that should be + used for the PRE SRAM double buffer. + +example: + +pre@21c8000 { + compatible = "fsl,imx6qp-pre"; + reg = <0x021c8000 0x1000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>; + clocks = <&clks IMX6QDL_CLK_PRE0>; + clock-names = "axi"; + fsl,iram = <&ocram2>; +}; + +Freescale i.MX PRG (Prefetch Resolve Gasket) +============================================ + +Required properties: +- compatible: should be "fsl,imx6qp-prg" +- reg: should be register base and length as documented in the + datasheet +- clocks : phandles to the PRG ipg and axi clock inputs, as described + in Documentation/devicetree/bindings/clock/clock-bindings.txt and + Documentation/devicetree/bindings/clock/imx6q-clock.yaml. +- clock-names: should be "ipg" and "axi" +- fsl,pres: phandles to the PRE units attached to this PRG, with the fixed + PRE as the first entry and the muxable PREs following. + +example: + +prg@21cc000 { + compatible = "fsl,imx6qp-prg"; + reg = <0x021cc000 0x1000>; + clocks = <&clks IMX6QDL_CLK_PRG0_APB>, + <&clks IMX6QDL_CLK_PRG0_AXI>; + clock-names = "ipg", "axi"; + fsl,pres = <&pre1>, <&pre2>, <&pre3>; +}; + +Parallel display support +======================== + +Required properties: +- compatible: Should be "fsl,imx-parallel-display" +Optional properties: +- interface-pix-fmt: How this display is connected to the + display interface. Currently supported types: "rgb24", "rgb565", "bgr666" + and "lvds666". +- edid: verbatim EDID data block describing attached display. +- ddc: phandle describing the i2c bus handling the display data + channel +- port@[0-1]: Port nodes with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + Port 0 is the input port connected to the IPU display interface, + port 1 is the output port connected to a panel. + +example: + +disp0 { + compatible = "fsl,imx-parallel-display"; + edid = [edid-data]; + interface-pix-fmt = "rgb24"; + + port@0 { + reg = <0>; + + display_in: endpoint { + remote-endpoint = <&ipu_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; +}; + +panel { + ... + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/display/imx/hdmi.txt b/Documentation/devicetree/bindings/display/imx/hdmi.txt new file mode 100644 index 000000000..6d021e71c --- /dev/null +++ b/Documentation/devicetree/bindings/display/imx/hdmi.txt @@ -0,0 +1,65 @@ +Freescale i.MX6 DWC HDMI TX Encoder +=================================== + +The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP +with a companion PHY IP. + +These DT bindings follow the Synopsys DWC HDMI TX bindings defined in +Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt with the +following device-specific properties. + + +Required properties: + +- compatible : Shall be one of "fsl,imx6q-hdmi" or "fsl,imx6dl-hdmi". +- reg: See dw_hdmi.txt. +- interrupts: HDMI interrupt number +- clocks: See dw_hdmi.txt. +- clock-names: Shall contain "iahb" and "isfr" as defined in dw_hdmi.txt. +- ports: See dw_hdmi.txt. The DWC HDMI shall have between one and four ports, + numbered 0 to 3, corresponding to the four inputs of the HDMI multiplexer. + Each port shall have a single endpoint. +- gpr : Shall contain a phandle to the iomuxc-gpr region containing the HDMI + multiplexer control register. + +Optional properties + +- ddc-i2c-bus: The HDMI DDC bus can be connected to either a system I2C master + or the functionally-reduced I2C master contained in the DWC HDMI. When + connected to a system I2C master this property contains a phandle to that + I2C master controller. + + +Example: + + gpr: iomuxc-gpr@20e0000 { + /* ... */ + }; + + hdmi: hdmi@120000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6q-hdmi"; + reg = <0x00120000 0x9000>; + interrupts = <0 115 0x04>; + gpr = <&gpr>; + clocks = <&clks 123>, <&clks 124>; + clock-names = "iahb", "isfr"; + ddc-i2c-bus = <&i2c2>; + + port@0 { + reg = <0>; + + hdmi_mux_0: endpoint { + remote-endpoint = <&ipu1_di0_hdmi>; + }; + }; + + port@1 { + reg = <1>; + + hdmi_mux_1: endpoint { + remote-endpoint = <&ipu1_di1_hdmi>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/imx/ldb.txt b/Documentation/devicetree/bindings/display/imx/ldb.txt new file mode 100644 index 000000000..8e6e7d797 --- /dev/null +++ b/Documentation/devicetree/bindings/display/imx/ldb.txt @@ -0,0 +1,147 @@ +Device-Tree bindings for LVDS Display Bridge (ldb) + +LVDS Display Bridge +=================== + +The LVDS Display Bridge device tree node contains up to two lvds-channel +nodes describing each of the two LVDS encoder channels of the bridge. + +Required properties: + - #address-cells : should be <1> + - #size-cells : should be <0> + - compatible : should be "fsl,imx53-ldb" or "fsl,imx6q-ldb". + Both LDB versions are similar, but i.MX6 has an additional + multiplexer in the front to select any of the four IPU display + interfaces as input for each LVDS channel. + - gpr : should be <&gpr> on i.MX53 and i.MX6q. + The phandle points to the iomuxc-gpr region containing the LVDS + control register. +- clocks, clock-names : phandles to the LDB divider and selector clocks and to + the display interface selector clocks, as described in + Documentation/devicetree/bindings/clock/clock-bindings.txt + The following clocks are expected on i.MX53: + "di0_pll" - LDB LVDS channel 0 mux + "di1_pll" - LDB LVDS channel 1 mux + "di0" - LDB LVDS channel 0 gate + "di1" - LDB LVDS channel 1 gate + "di0_sel" - IPU1 DI0 mux + "di1_sel" - IPU1 DI1 mux + On i.MX6q the following additional clocks are needed: + "di2_sel" - IPU2 DI0 mux + "di3_sel" - IPU2 DI1 mux + The needed clock numbers for each are documented in + Documentation/devicetree/bindings/clock/imx5-clock.yaml, and in + Documentation/devicetree/bindings/clock/imx6q-clock.yaml. + +Optional properties: + - pinctrl-names : should be "default" on i.MX53, not used on i.MX6q + - pinctrl-0 : a phandle pointing to LVDS pin settings on i.MX53, + not used on i.MX6q + - fsl,dual-channel : boolean. if it exists, only LVDS channel 0 should + be configured - one input will be distributed on both outputs in dual + channel mode + +LVDS Channel +============ + +Each LVDS Channel has to contain either an of graph link to a panel device node +or a display-timings node that describes the video timings for the connected +LVDS display as well as the fsl,data-mapping and fsl,data-width properties. + +Required properties: + - reg : should be <0> or <1> + - port: Input and output port nodes with endpoint definitions as defined in + Documentation/devicetree/bindings/graph.txt. + On i.MX5, the internal two-input-multiplexer is used. Due to hardware + limitations, only one input port (port@[0,1]) can be used for each channel + (lvds-channel@[0,1], respectively). + On i.MX6, there should be four input ports (port@[0-3]) that correspond + to the four LVDS multiplexer inputs. + A single output port (port@2 on i.MX5, port@4 on i.MX6) must be connected + to a panel input port. Optionally, the output port can be left out if + display-timings are used instead. + +Optional properties (required if display-timings are used): + - ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing + - display-timings : A node that describes the display timings as defined in + Documentation/devicetree/bindings/display/panel/display-timing.txt. + - fsl,data-mapping : should be "spwg" or "jeida" + This describes how the color bits are laid out in the + serialized LVDS signal. + - fsl,data-width : should be <18> or <24> + +example: + +gpr: iomuxc-gpr@53fa8000 { + /* ... */ +}; + +ldb: ldb@53fa8008 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx53-ldb"; + gpr = <&gpr>; + clocks = <&clks IMX5_CLK_LDB_DI0_SEL>, + <&clks IMX5_CLK_LDB_DI1_SEL>, + <&clks IMX5_CLK_IPU_DI0_SEL>, + <&clks IMX5_CLK_IPU_DI1_SEL>, + <&clks IMX5_CLK_LDB_DI0_GATE>, + <&clks IMX5_CLK_LDB_DI1_GATE>; + clock-names = "di0_pll", "di1_pll", + "di0_sel", "di1_sel", + "di0", "di1"; + + /* Using an of-graph endpoint link to connect the panel */ + lvds-channel@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + port@0 { + reg = <0>; + + lvds0_in: endpoint { + remote-endpoint = <&ipu_di0_lvds0>; + }; + }; + + port@2 { + reg = <2>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + + /* Using display-timings and fsl,data-mapping/width instead */ + lvds-channel@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + fsl,data-mapping = "spwg"; + fsl,data-width = <24>; + + display-timings { + /* ... */ + }; + + port@1 { + reg = <1>; + + lvds1_in: endpoint { + remote-endpoint = <&ipu_di1_lvds1>; + }; + }; + }; +}; + +panel: lvds-panel { + /* ... */ + + port { + panel_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml b/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml new file mode 100644 index 000000000..f1f25aa79 --- /dev/null +++ b/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml @@ -0,0 +1,108 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 NXP +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/display/imx/nxp,imx8mq-dcss.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: iMX8MQ Display Controller Subsystem (DCSS) + +maintainers: + - Laurentiu Palcu <laurentiu.palcu@nxp.com> + +description: + + The DCSS (display controller sub system) is used to source up to three + display buffers, compose them, and drive a display using HDMI 2.0a(with HDCP + 2.2) or MIPI-DSI. The DCSS is intended to support up to 4kp60 displays. HDR10 + image processing capabilities are included to provide a solution capable of + driving next generation high dynamic range displays. + +properties: + compatible: + const: nxp,imx8mq-dcss + + reg: + items: + - description: DCSS base address and size, up to IRQ steer start + - description: DCSS BLKCTL base address and size + + interrupts: + items: + - description: Context loader completion and error interrupt + - description: DTG interrupt used to signal context loader trigger time + - description: DTG interrupt for Vblank + + interrupt-names: + items: + - const: ctxld + - const: ctxld_kick + - const: vblank + + clocks: + items: + - description: Display APB clock for all peripheral PIO access interfaces + - description: Display AXI clock needed by DPR, Scaler, RTRAM_CTRL + - description: RTRAM clock + - description: Pixel clock, can be driven either by HDMI phy clock or MIPI + - description: DTRC clock, needed by video decompressor + + clock-names: + items: + - const: apb + - const: axi + - const: rtrm + - const: pix + - const: dtrc + + assigned-clocks: + items: + - description: Phandle and clock specifier of IMX8MQ_CLK_DISP_AXI_ROOT + - description: Phandle and clock specifier of IMX8MQ_CLK_DISP_RTRM + - description: Phandle and clock specifier of either IMX8MQ_VIDEO2_PLL1_REF_SEL or + IMX8MQ_VIDEO_PLL1_REF_SEL + + assigned-clock-parents: + items: + - description: Phandle and clock specifier of IMX8MQ_SYS1_PLL_800M + - description: Phandle and clock specifier of IMX8MQ_SYS1_PLL_800M + - description: Phandle and clock specifier of IMX8MQ_CLK_27M + + assigned-clock-rates: + items: + - description: Must be 800 MHz + - description: Must be 400 MHz + + port: + type: object + description: + A port node pointing to the input port of a HDMI/DP or MIPI display bridge. + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mq-clock.h> + dcss: display-controller@32e00000 { + compatible = "nxp,imx8mq-dcss"; + reg = <0x32e00000 0x2d000>, <0x32e2f000 0x1000>; + interrupts = <6>, <8>, <9>; + interrupt-names = "ctxld", "ctxld_kick", "vblank"; + interrupt-parent = <&irqsteer>; + clocks = <&clk IMX8MQ_CLK_DISP_APB_ROOT>, <&clk IMX8MQ_CLK_DISP_AXI_ROOT>, + <&clk IMX8MQ_CLK_DISP_RTRM_ROOT>, <&clk IMX8MQ_VIDEO2_PLL_OUT>, + <&clk IMX8MQ_CLK_DISP_DTRC>; + clock-names = "apb", "axi", "rtrm", "pix", "dtrc"; + assigned-clocks = <&clk IMX8MQ_CLK_DISP_AXI>, <&clk IMX8MQ_CLK_DISP_RTRM>, + <&clk IMX8MQ_VIDEO2_PLL1_REF_SEL>; + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_800M>, <&clk IMX8MQ_SYS1_PLL_800M>, + <&clk IMX8MQ_CLK_27M>; + assigned-clock-rates = <800000000>, + <400000000>; + port { + dcss_out: endpoint { + remote-endpoint = <&hdmi_in>; + }; + }; + }; + diff --git a/Documentation/devicetree/bindings/display/ingenic,ipu.yaml b/Documentation/devicetree/bindings/display/ingenic,ipu.yaml new file mode 100644 index 000000000..12064a8e7 --- /dev/null +++ b/Documentation/devicetree/bindings/display/ingenic,ipu.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/ingenic,ipu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ingenic SoCs Image Processing Unit (IPU) devicetree bindings + +maintainers: + - Paul Cercueil <paul@crapouillou.net> + +properties: + compatible: + oneOf: + - enum: + - ingenic,jz4725b-ipu + - ingenic,jz4760-ipu + - items: + - const: ingenic,jz4770-ipu + - const: ingenic,jz4760-ipu + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: ipu + +patternProperties: + "^ports?$": + description: OF graph bindings (specified in bindings/graph.txt). + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/jz4770-cgu.h> + ipu@13080000 { + compatible = "ingenic,jz4770-ipu", "ingenic,jz4760-ipu"; + reg = <0x13080000 0x800>; + + interrupt-parent = <&intc>; + interrupts = <29>; + + clocks = <&cgu JZ4770_CLK_IPU>; + clock-names = "ipu"; + + port { + ipu_ep: endpoint { + remote-endpoint = <&lcdc_ep>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/ingenic,lcd.yaml b/Documentation/devicetree/bindings/display/ingenic,lcd.yaml new file mode 100644 index 000000000..768050f30 --- /dev/null +++ b/Documentation/devicetree/bindings/display/ingenic,lcd.yaml @@ -0,0 +1,126 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/ingenic,lcd.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ingenic SoCs LCD controller devicetree bindings + +maintainers: + - Paul Cercueil <paul@crapouillou.net> + +properties: + $nodename: + pattern: "^lcd-controller@[0-9a-f]+$" + + compatible: + enum: + - ingenic,jz4740-lcd + - ingenic,jz4725b-lcd + - ingenic,jz4770-lcd + - ingenic,jz4780-lcd + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Pixel clock + - description: Module clock + minItems: 1 + + clock-names: + items: + - const: lcd_pclk + - const: lcd + minItems: 1 + + port: + description: OF graph bindings (specified in bindings/graph.txt). + + ports: + description: OF graph bindings (specified in bindings/graph.txt). + type: object + properties: + port@0: + type: object + description: DPI output, to interface with TFT panels. + + port@8: + type: object + description: Link to the Image Processing Unit (IPU). + (See ingenic,ipu.yaml). + + required: + - port@0 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +if: + properties: + compatible: + contains: + enum: + - ingenic,jz4740-lcd + - ingenic,jz4780-lcd +then: + properties: + clocks: + minItems: 2 + clock-names: + minItems: 2 +else: + properties: + clocks: + maxItems: 1 + clock-names: + maxItems: 1 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/jz4740-cgu.h> + lcd-controller@13050000 { + compatible = "ingenic,jz4740-lcd"; + reg = <0x13050000 0x1000>; + + interrupt-parent = <&intc>; + interrupts = <30>; + + clocks = <&cgu JZ4740_CLK_LCD_PCLK>, <&cgu JZ4740_CLK_LCD>; + clock-names = "lcd_pclk", "lcd"; + + port { + endpoint { + remote-endpoint = <&panel_input>; + }; + }; + }; + + - | + #include <dt-bindings/clock/jz4725b-cgu.h> + lcd-controller@13050000 { + compatible = "ingenic,jz4725b-lcd"; + reg = <0x13050000 0x1000>; + + interrupt-parent = <&intc>; + interrupts = <31>; + + clocks = <&cgu JZ4725B_CLK_LCD>; + clock-names = "lcd_pclk"; + + port { + endpoint { + remote-endpoint = <&panel_input>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/marvell,pxa2xx-lcdc.txt b/Documentation/devicetree/bindings/display/marvell,pxa2xx-lcdc.txt new file mode 100644 index 000000000..45ffd6c41 --- /dev/null +++ b/Documentation/devicetree/bindings/display/marvell,pxa2xx-lcdc.txt @@ -0,0 +1,36 @@ +PXA LCD Controller +------------------ + +Required properties: + - compatible : one of these + "marvell,pxa2xx-lcdc", + "marvell,pxa270-lcdc", + "marvell,pxa300-lcdc" + - reg : should contain 1 register range (address and length). + - interrupts : framebuffer controller interrupt. + - clocks: phandle to input clocks + +Optional properties: + - lcd-supply: A phandle to a power regulator that controls the LCD voltage. + +Required nodes: + - port: connection to the LCD panel (see video-interfaces.txt) + This node must have its properties bus-width and remote-endpoint set. + If the panel is not a TFT color panel, then a "lcd-type" property in + the panel should specify the panel type. + This panel node should be in the board dts. + +Example: + lcd-controller@40500000 { + compatible = "marvell,pxa2xx-lcdc"; + reg = <0x44000000 0x10000>; + interrupts = <17>; + clocks = <&clks CLK_LCD>; + + port { + lcdc_out: endpoint { + remote-endpoint = <&panel_in>; + bus-width = <16>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/marvell,pxa300-gcu.txt b/Documentation/devicetree/bindings/display/marvell,pxa300-gcu.txt new file mode 100644 index 000000000..9cfae5c4e --- /dev/null +++ b/Documentation/devicetree/bindings/display/marvell,pxa300-gcu.txt @@ -0,0 +1,17 @@ +PXA3xx GCU Controller +--------------------- + +Required properties: + - compatible : "marvell,pxa300-gcu" + - reg : should contain the register range (address and length). + - interrupts : Controller interrupt. + - clocks: phandle to the PXA specific input clock. + +Example for PXA300: + + display-controller@54000000 { + compatible = "marvell,pxa300-gcu"; + reg = <0x54000000 0x1000>; + interrupts = <39>; + clocks = <&clks CLK_PXA300_GCU>; + }; diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt new file mode 100644 index 000000000..121220745 --- /dev/null +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt @@ -0,0 +1,209 @@ +Mediatek display subsystem +========================== + +The Mediatek display subsystem consists of various DISP function blocks in the +MMSYS register space. The connections between them can be configured by output +and input selectors in the MMSYS_CONFIG register space. Pixel clock and start +of frame signal are distributed to the other function blocks by a DISP_MUTEX +function block. + +All DISP device tree nodes must be siblings to the central MMSYS_CONFIG node. +For a description of the MMSYS_CONFIG binding, see +Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt. + +DISP function blocks +==================== + +A display stream starts at a source function block that reads pixel data from +memory and ends with a sink function block that drives pixels on a display +interface, or writes pixels back to memory. All DISP function blocks have +their own register space, interrupt, and clock gate. The blocks that can +access memory additionally have to list the IOMMU and local arbiter they are +connected to. + +For a description of the display interface sink function blocks, see +Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt and +Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt. + +Required properties (all function blocks): +- compatible: "mediatek,<chip>-disp-<function>", one of + "mediatek,<chip>-disp-ovl" - overlay (4 layers, blending, csc) + "mediatek,<chip>-disp-ovl-2l" - overlay (2 layers, blending, csc) + "mediatek,<chip>-disp-rdma" - read DMA / line buffer + "mediatek,<chip>-disp-wdma" - write DMA + "mediatek,<chip>-disp-ccorr" - color correction + "mediatek,<chip>-disp-color" - color processor + "mediatek,<chip>-disp-dither" - dither + "mediatek,<chip>-disp-aal" - adaptive ambient light controller + "mediatek,<chip>-disp-gamma" - gamma correction + "mediatek,<chip>-disp-merge" - merge streams from two RDMA sources + "mediatek,<chip>-disp-split" - split stream to two encoders + "mediatek,<chip>-disp-ufoe" - data compression engine + "mediatek,<chip>-dsi" - DSI controller, see mediatek,dsi.txt + "mediatek,<chip>-dpi" - DPI controller, see mediatek,dpi.txt + "mediatek,<chip>-disp-mutex" - display mutex + "mediatek,<chip>-disp-od" - overdrive + the supported chips are mt2701, mt7623, mt2712 and mt8173. +- reg: Physical base address and length of the function block register space +- interrupts: The interrupt signal from the function block (required, except for + merge and split function blocks). +- clocks: device clocks + See Documentation/devicetree/bindings/clock/clock-bindings.txt for details. + For most function blocks this is just a single clock input. Only the DSI and + DPI controller nodes have multiple clock inputs. These are documented in + mediatek,dsi.txt and mediatek,dpi.txt, respectively. + An exception is that the mt8183 mutex is always free running with no clocks property. + +Required properties (DMA function blocks): +- compatible: Should be one of + "mediatek,<chip>-disp-ovl" + "mediatek,<chip>-disp-rdma" + "mediatek,<chip>-disp-wdma" + the supported chips are mt2701 and mt8173. +- larb: Should contain a phandle pointing to the local arbiter device as defined + in Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt +- iommus: Should point to the respective IOMMU block with master port as + argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt + for details. + +Examples: + +mmsys: clock-controller@14000000 { + compatible = "mediatek,mt8173-mmsys", "syscon"; + reg = <0 0x14000000 0 0x1000>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + #clock-cells = <1>; +}; + +ovl0: ovl@1400c000 { + compatible = "mediatek,mt8173-disp-ovl"; + reg = <0 0x1400c000 0 0x1000>; + interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DISP_OVL0>; + iommus = <&iommu M4U_PORT_DISP_OVL0>; + mediatek,larb = <&larb0>; +}; + +ovl1: ovl@1400d000 { + compatible = "mediatek,mt8173-disp-ovl"; + reg = <0 0x1400d000 0 0x1000>; + interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DISP_OVL1>; + iommus = <&iommu M4U_PORT_DISP_OVL1>; + mediatek,larb = <&larb4>; +}; + +rdma0: rdma@1400e000 { + compatible = "mediatek,mt8173-disp-rdma"; + reg = <0 0x1400e000 0 0x1000>; + interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DISP_RDMA0>; + iommus = <&iommu M4U_PORT_DISP_RDMA0>; + mediatek,larb = <&larb0>; +}; + +rdma1: rdma@1400f000 { + compatible = "mediatek,mt8173-disp-rdma"; + reg = <0 0x1400f000 0 0x1000>; + interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DISP_RDMA1>; + iommus = <&iommu M4U_PORT_DISP_RDMA1>; + mediatek,larb = <&larb4>; +}; + +rdma2: rdma@14010000 { + compatible = "mediatek,mt8173-disp-rdma"; + reg = <0 0x14010000 0 0x1000>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DISP_RDMA2>; + iommus = <&iommu M4U_PORT_DISP_RDMA2>; + mediatek,larb = <&larb4>; +}; + +wdma0: wdma@14011000 { + compatible = "mediatek,mt8173-disp-wdma"; + reg = <0 0x14011000 0 0x1000>; + interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DISP_WDMA0>; + iommus = <&iommu M4U_PORT_DISP_WDMA0>; + mediatek,larb = <&larb0>; +}; + +wdma1: wdma@14012000 { + compatible = "mediatek,mt8173-disp-wdma"; + reg = <0 0x14012000 0 0x1000>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DISP_WDMA1>; + iommus = <&iommu M4U_PORT_DISP_WDMA1>; + mediatek,larb = <&larb4>; +}; + +color0: color@14013000 { + compatible = "mediatek,mt8173-disp-color"; + reg = <0 0x14013000 0 0x1000>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DISP_COLOR0>; +}; + +color1: color@14014000 { + compatible = "mediatek,mt8173-disp-color"; + reg = <0 0x14014000 0 0x1000>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DISP_COLOR1>; +}; + +aal@14015000 { + compatible = "mediatek,mt8173-disp-aal"; + reg = <0 0x14015000 0 0x1000>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DISP_AAL>; +}; + +gamma@14016000 { + compatible = "mediatek,mt8173-disp-gamma"; + reg = <0 0x14016000 0 0x1000>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DISP_GAMMA>; +}; + +ufoe@1401a000 { + compatible = "mediatek,mt8173-disp-ufoe"; + reg = <0 0x1401a000 0 0x1000>; + interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DISP_UFOE>; +}; + +dsi0: dsi@1401b000 { + /* See mediatek,dsi.txt for details */ +}; + +dpi0: dpi@1401d000 { + /* See mediatek,dpi.txt for details */ +}; + +mutex: mutex@14020000 { + compatible = "mediatek,mt8173-disp-mutex"; + reg = <0 0x14020000 0 0x1000>; + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_MUTEX_32K>; +}; + +od@14023000 { + compatible = "mediatek,mt8173-disp-od"; + reg = <0 0x14023000 0 0x1000>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DISP_OD>; +}; diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt new file mode 100644 index 000000000..dc1ebd13c --- /dev/null +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt @@ -0,0 +1,42 @@ +Mediatek DPI Device +=================== + +The Mediatek DPI function block is a sink of the display subsystem and +provides 8-bit RGB/YUV444 or 8/10/10-bit YUV422 pixel data on a parallel +output bus. + +Required properties: +- compatible: "mediatek,<chip>-dpi" + the supported chips are mt2701, mt7623, mt8173 and mt8183. +- reg: Physical base address and length of the controller's registers +- interrupts: The interrupt signal from the function block. +- clocks: device clocks + See Documentation/devicetree/bindings/clock/clock-bindings.txt for details. +- clock-names: must contain "pixel", "engine", and "pll" +- port: Output port node with endpoint definitions as described in + Documentation/devicetree/bindings/graph.txt. This port should be connected + to the input port of an attached HDMI or LVDS encoder chip. + +Optional properties: +- pinctrl-names: Contain "default" and "sleep". + +Example: + +dpi0: dpi@1401d000 { + compatible = "mediatek,mt8173-dpi"; + reg = <0 0x1401d000 0 0x1000>; + interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>; + clocks = <&mmsys CLK_MM_DPI_PIXEL>, + <&mmsys CLK_MM_DPI_ENGINE>, + <&apmixedsys CLK_APMIXED_TVDPLL>; + clock-names = "pixel", "engine", "pll"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&dpi_pin_func>; + pinctrl-1 = <&dpi_pin_idle>; + + port { + dpi0_out: endpoint { + remote-endpoint = <&hdmi0_in>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt new file mode 100644 index 000000000..f06f24d40 --- /dev/null +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt @@ -0,0 +1,72 @@ +Mediatek DSI Device +=================== + +The Mediatek DSI function block is a sink of the display subsystem and can +drive up to 4-lane MIPI DSI output. Two DSIs can be synchronized for dual- +channel output. + +Required properties: +- compatible: "mediatek,<chip>-dsi" +- the supported chips are mt2701, mt7623, mt8173 and mt8183. +- reg: Physical base address and length of the controller's registers +- interrupts: The interrupt signal from the function block. +- clocks: device clocks + See Documentation/devicetree/bindings/clock/clock-bindings.txt for details. +- clock-names: must contain "engine", "digital", and "hs" +- phys: phandle link to the MIPI D-PHY controller. +- phy-names: must contain "dphy" +- port: Output port node with endpoint definitions as described in + Documentation/devicetree/bindings/graph.txt. This port should be connected + to the input port of an attached DSI panel or DSI-to-eDP encoder chip. + +MIPI TX Configuration Module +============================ + +The MIPI TX configuration module controls the MIPI D-PHY. + +Required properties: +- compatible: "mediatek,<chip>-mipi-tx" +- the supported chips are mt2701, 7623, mt8173 and mt8183. +- reg: Physical base address and length of the controller's registers +- clocks: PLL reference clock +- clock-output-names: name of the output clock line to the DSI encoder +- #clock-cells: must be <0>; +- #phy-cells: must be <0>. + +Optional properties: +- drive-strength-microamp: adjust driving current, should be 3000 ~ 6000. And + the step is 200. +- nvmem-cells: A phandle to the calibration data provided by a nvmem device. If + unspecified default values shall be used. +- nvmem-cell-names: Should be "calibration-data" + +Example: + +mipi_tx0: mipi-dphy@10215000 { + compatible = "mediatek,mt8173-mipi-tx"; + reg = <0 0x10215000 0 0x1000>; + clocks = <&clk26m>; + clock-output-names = "mipi_tx0_pll"; + #clock-cells = <0>; + #phy-cells = <0>; + drive-strength-microamp = <4600>; + nvmem-cells= <&mipi_tx_calibration>; + nvmem-cell-names = "calibration-data"; +}; + +dsi0: dsi@1401b000 { + compatible = "mediatek,mt8173-dsi"; + reg = <0 0x1401b000 0 0x1000>; + interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_LOW>; + clocks = <&mmsys MM_DSI0_ENGINE>, <&mmsys MM_DSI0_DIGITAL>, + <&mipi_tx0>; + clock-names = "engine", "digital", "hs"; + phys = <&mipi_tx0>; + phy-names = "dphy"; + + port { + dsi0_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt new file mode 100644 index 000000000..6b1c58640 --- /dev/null +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt @@ -0,0 +1,152 @@ +Mediatek HDMI Encoder +===================== + +The Mediatek HDMI encoder can generate HDMI 1.4a or MHL 2.0 signals from +its parallel input. + +Required properties: +- compatible: Should be "mediatek,<chip>-hdmi". +- the supported chips are mt2701, mt7623 and mt8173 +- reg: Physical base address and length of the controller's registers +- interrupts: The interrupt signal from the function block. +- clocks: device clocks + See Documentation/devicetree/bindings/clock/clock-bindings.txt for details. +- clock-names: must contain "pixel", "pll", "bclk", and "spdif". +- phys: phandle link to the HDMI PHY node. + See Documentation/devicetree/bindings/phy/phy-bindings.txt for details. +- phy-names: must contain "hdmi" +- mediatek,syscon-hdmi: phandle link and register offset to the system + configuration registers. For mt8173 this must be offset 0x900 into the + MMSYS_CONFIG region: <&mmsys 0x900>. +- ports: A node containing input and output port nodes with endpoint + definitions as documented in Documentation/devicetree/bindings/graph.txt. +- port@0: The input port in the ports node should be connected to a DPI output + port. +- port@1: The output port in the ports node should be connected to the input + port of a connector node that contains a ddc-i2c-bus property, or to the + input port of an attached bridge chip, such as a SlimPort transmitter. + +HDMI CEC +======== + +The HDMI CEC controller handles hotplug detection and CEC communication. + +Required properties: +- compatible: Should be "mediatek,<chip>-cec" +- the supported chips are mt7623 and mt8173 +- reg: Physical base address and length of the controller's registers +- interrupts: The interrupt signal from the function block. +- clocks: device clock + +HDMI DDC +======== + +The HDMI DDC i2c controller is used to interface with the HDMI DDC pins. +The Mediatek's I2C controller is used to interface with I2C devices. + +Required properties: +- compatible: Should be "mediatek,<chip>-hdmi-ddc" +- the supported chips are mt7623 and mt8173 +- reg: Physical base address and length of the controller's registers +- clocks: device clock +- clock-names: Should be "ddc-i2c". + +HDMI PHY +======== + +The HDMI PHY serializes the HDMI encoder's three channel 10-bit parallel +output and drives the HDMI pads. + +Required properties: +- compatible: "mediatek,<chip>-hdmi-phy" +- the supported chips are mt2701, mt7623 and mt8173 +- reg: Physical base address and length of the module's registers +- clocks: PLL reference clock +- clock-names: must contain "pll_ref" +- clock-output-names: must be "hdmitx_dig_cts" on mt8173 +- #phy-cells: must be <0> +- #clock-cells: must be <0> + +Optional properties: +- mediatek,ibias: TX DRV bias current for <1.65Gbps, defaults to 0xa +- mediatek,ibias_up: TX DRV bias current for >1.65Gbps, defaults to 0x1c + +Example: + +cec: cec@10013000 { + compatible = "mediatek,mt8173-cec"; + reg = <0 0x10013000 0 0xbc>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_CEC>; +}; + +hdmi_phy: hdmi-phy@10209100 { + compatible = "mediatek,mt8173-hdmi-phy"; + reg = <0 0x10209100 0 0x24>; + clocks = <&apmixedsys CLK_APMIXED_HDMI_REF>; + clock-names = "pll_ref"; + clock-output-names = "hdmitx_dig_cts"; + mediatek,ibias = <0xa>; + mediatek,ibias_up = <0x1c>; + #clock-cells = <0>; + #phy-cells = <0>; +}; + +hdmi_ddc0: i2c@11012000 { + compatible = "mediatek,mt8173-hdmi-ddc"; + reg = <0 0x11012000 0 0x1c>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pericfg CLK_PERI_I2C5>; + clock-names = "ddc-i2c"; +}; + +hdmi0: hdmi@14025000 { + compatible = "mediatek,mt8173-hdmi"; + reg = <0 0x14025000 0 0x400>; + interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_LOW>; + clocks = <&mmsys CLK_MM_HDMI_PIXEL>, + <&mmsys CLK_MM_HDMI_PLLCK>, + <&mmsys CLK_MM_HDMI_AUDIO>, + <&mmsys CLK_MM_HDMI_SPDIF>; + clock-names = "pixel", "pll", "bclk", "spdif"; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_pin>; + phys = <&hdmi_phy>; + phy-names = "hdmi"; + mediatek,syscon-hdmi = <&mmsys 0x900>; + assigned-clocks = <&topckgen CLK_TOP_HDMI_SEL>; + assigned-clock-parents = <&hdmi_phy>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + hdmi0_in: endpoint { + remote-endpoint = <&dpi0_out>; + }; + }; + + port@1 { + reg = <1>; + + hdmi0_out: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; + }; + }; +}; + +connector { + compatible = "hdmi-connector"; + type = "a"; + ddc-i2c-bus = <&hdmiddc0>; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi0_out>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/display/mipi-dsi-bus.txt b/Documentation/devicetree/bindings/display/mipi-dsi-bus.txt new file mode 100644 index 000000000..a336599f6 --- /dev/null +++ b/Documentation/devicetree/bindings/display/mipi-dsi-bus.txt @@ -0,0 +1,235 @@ +MIPI DSI (Display Serial Interface) busses +========================================== + +The MIPI Display Serial Interface specifies a serial bus and a protocol for +communication between a host and up to four peripherals. This document will +define the syntax used to represent a DSI bus in a device tree. + +This document describes DSI bus-specific properties only or defines existing +standard properties in the context of the DSI bus. + +Each DSI host provides a DSI bus. The DSI host controller's node contains a +set of properties that characterize the bus. Child nodes describe individual +peripherals on that bus. + +The following assumes that only a single peripheral is connected to a DSI +host. Experience shows that this is true for the large majority of setups. + +DSI host +======== + +In addition to the standard properties and those defined by the parent bus of +a DSI host, the following properties apply to a node representing a DSI host. + +Required properties: +- #address-cells: The number of cells required to represent an address on the + bus. DSI peripherals are addressed using a 2-bit virtual channel number, so + a maximum of 4 devices can be addressed on a single bus. Hence the value of + this property should be 1. +- #size-cells: Should be 0. There are cases where it makes sense to use a + different value here. See below. + +Optional properties: +- clock-master: boolean. Should be enabled if the host is being used in + conjunction with another DSI host to drive the same peripheral. Hardware + supporting such a configuration generally requires the data on both the busses + to be driven by the same clock. Only the DSI host instance controlling this + clock should contain this property. + +DSI peripheral +============== + +Peripherals with DSI as control bus, or no control bus +------------------------------------------------------ + +Peripherals with the DSI bus as the primary control bus, or peripherals with +no control bus but use the DSI bus to transmit pixel data are represented +as child nodes of the DSI host's node. Properties described here apply to all +DSI peripherals, but individual bindings may want to define additional, +device-specific properties. + +Required properties: +- reg: The virtual channel number of a DSI peripheral. Must be in the range + from 0 to 3. + +Some DSI peripherals respond to more than a single virtual channel. In that +case two alternative representations can be chosen: +- The reg property can take multiple entries, one for each virtual channel + that the peripheral responds to. +- If the virtual channels that a peripheral responds to are consecutive, the + #size-cells can be set to 1. The first cell of each entry in the reg + property is the number of the first virtual channel and the second cell is + the number of consecutive virtual channels. + +Peripherals with a different control bus +---------------------------------------- + +There are peripherals that have I2C/SPI (or some other non-DSI bus) as the +primary control bus, but are also connected to a DSI bus (mostly for the data +path). Connections between such peripherals and a DSI host can be represented +using the graph bindings [1], [2]. + +Peripherals that support dual channel DSI +----------------------------------------- + +Peripherals with higher bandwidth requirements can be connected to 2 DSI +busses. Each DSI bus/channel drives some portion of the pixel data (generally +left/right half of each line of the display, or even/odd lines of the display). +The graph bindings should be used to represent the multiple DSI busses that are +connected to this peripheral. Each DSI host's output endpoint can be linked to +an input endpoint of the DSI peripheral. + +[1] Documentation/devicetree/bindings/graph.txt +[2] Documentation/devicetree/bindings/media/video-interfaces.txt + +Examples +======== +- (1), (2) and (3) are examples of a DSI host and peripheral on the DSI bus + with different virtual channel configurations. +- (4) is an example of a peripheral on a I2C control bus connected to a + DSI host using of-graph bindings. +- (5) is an example of 2 DSI hosts driving a dual-channel DSI peripheral, + which uses I2C as its primary control bus. + +1) + dsi-host { + ... + + #address-cells = <1>; + #size-cells = <0>; + + /* peripheral responds to virtual channel 0 */ + peripheral@0 { + compatible = "..."; + reg = <0>; + }; + + ... + }; + +2) + dsi-host { + ... + + #address-cells = <1>; + #size-cells = <0>; + + /* peripheral responds to virtual channels 0 and 2 */ + peripheral@0 { + compatible = "..."; + reg = <0, 2>; + }; + + ... + }; + +3) + dsi-host { + ... + + #address-cells = <1>; + #size-cells = <1>; + + /* peripheral responds to virtual channels 1, 2 and 3 */ + peripheral@1 { + compatible = "..."; + reg = <1 3>; + }; + + ... + }; + +4) + i2c-host { + ... + + dsi-bridge@35 { + compatible = "..."; + reg = <0x35>; + + ports { + ... + + port { + bridge_mipi_in: endpoint { + remote-endpoint = <&host_mipi_out>; + }; + }; + }; + }; + }; + + dsi-host { + ... + + ports { + ... + + port { + host_mipi_out: endpoint { + remote-endpoint = <&bridge_mipi_in>; + }; + }; + }; + }; + +5) + i2c-host { + dsi-bridge@35 { + compatible = "..."; + reg = <0x35>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + dsi1_in: endpoint { + remote-endpoint = <&dsi1_out>; + }; + }; + }; + }; + }; + + dsi0-host { + ... + + /* + * this DSI instance drives the clock for both the host + * controllers + */ + clock-master; + + ports { + ... + + port { + dsi0_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + }; + }; + + dsi1-host { + ... + + ports { + ... + + port { + dsi1_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/msm/dpu.txt b/Documentation/devicetree/bindings/display/msm/dpu.txt new file mode 100644 index 000000000..551ae26f6 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/dpu.txt @@ -0,0 +1,141 @@ +Qualcomm Technologies, Inc. DPU KMS + +Description: + +Device tree bindings for MSM Mobile Display Subsytem(MDSS) that encapsulates +sub-blocks like DPU display controller, DSI and DP interfaces etc. +The DPU display controller is found in SDM845 SoC. + +MDSS: +Required properties: +- compatible: "qcom,sdm845-mdss", "qcom,sc7180-mdss" +- reg: physical base address and length of contoller's registers. +- reg-names: register region names. The following region is required: + * "mdss" +- power-domains: a power domain consumer specifier according to + Documentation/devicetree/bindings/power/power_domain.txt +- clocks: list of clock specifiers for clocks needed by the device. +- clock-names: device clock names, must be in same order as clocks property. + The following clocks are required: + * "iface" + * "bus" + * "core" +- interrupts: interrupt signal from MDSS. +- interrupt-controller: identifies the node as an interrupt controller. +- #interrupt-cells: specifies the number of cells needed to encode an interrupt + source, should be 1. +- iommus: phandle of iommu device node. +- #address-cells: number of address cells for the MDSS children. Should be 1. +- #size-cells: Should be 1. +- ranges: parent bus address space is the same as the child bus address space. +- interconnects : interconnect path specifier for MDSS according to + Documentation/devicetree/bindings/interconnect/interconnect.txt. Should be + 2 paths corresponding to 2 AXI ports. +- interconnect-names : MDSS will have 2 port names to differentiate between the + 2 interconnect paths defined with interconnect specifier. + +Optional properties: +- assigned-clocks: list of clock specifiers for clocks needing rate assignment +- assigned-clock-rates: list of clock frequencies sorted in the same order as + the assigned-clocks property. + +MDP: +Required properties: +- compatible: "qcom,sdm845-dpu", "qcom,sc7180-dpu" +- reg: physical base address and length of controller's registers. +- reg-names : register region names. The following region is required: + * "mdp" + * "vbif" +- clocks: list of clock specifiers for clocks needed by the device. +- clock-names: device clock names, must be in same order as clocks property. + The following clocks are required. + * "bus" + * "iface" + * "core" + * "vsync" +- interrupts: interrupt line from DPU to MDSS. +- ports: contains the list of output ports from DPU device. These ports connect + to interfaces that are external to the DPU hardware, such as DSI, DP etc. + + Each output port contains an endpoint that describes how it is connected to an + external interface. These are described by the standard properties documented + here: + Documentation/devicetree/bindings/graph.txt + Documentation/devicetree/bindings/media/video-interfaces.txt + + Port 0 -> DPU_INTF1 (DSI1) + Port 1 -> DPU_INTF2 (DSI2) + +Optional properties: +- assigned-clocks: list of clock specifiers for clocks needing rate assignment +- assigned-clock-rates: list of clock frequencies sorted in the same order as + the assigned-clocks property. + +Example: + + mdss: mdss@ae00000 { + compatible = "qcom,sdm845-mdss"; + reg = <0xae00000 0x1000>; + reg-names = "mdss"; + + power-domains = <&clock_dispcc 0>; + + clocks = <&gcc GCC_DISP_AHB_CLK>, <&gcc GCC_DISP_AXI_CLK>, + <&clock_dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "bus", "core"; + + assigned-clocks = <&clock_dispcc DISP_CC_MDSS_MDP_CLK>; + assigned-clock-rates = <300000000>; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + interconnects = <&rsc_hlos MASTER_MDP0 &rsc_hlos SLAVE_EBI1>, + <&rsc_hlos MASTER_MDP1 &rsc_hlos SLAVE_EBI1>; + + interconnect-names = "mdp0-mem", "mdp1-mem"; + + iommus = <&apps_iommu 0>; + + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0xae00000 0xb2008>; + + mdss_mdp: mdp@ae01000 { + compatible = "qcom,sdm845-dpu"; + reg = <0 0x1000 0x8f000>, <0 0xb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&clock_dispcc DISP_CC_MDSS_AHB_CLK>, + <&clock_dispcc DISP_CC_MDSS_AXI_CLK>, + <&clock_dispcc DISP_CC_MDSS_MDP_CLK>, + <&clock_dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "iface", "bus", "core", "vsync"; + + assigned-clocks = <&clock_dispcc DISP_CC_MDSS_MDP_CLK>, + <&clock_dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <0 0 300000000 19200000>; + + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt new file mode 100644 index 000000000..b9a64d3ff --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/dsi.txt @@ -0,0 +1,249 @@ +Qualcomm Technologies Inc. adreno/snapdragon DSI output + +DSI Controller: +Required properties: +- compatible: + * "qcom,mdss-dsi-ctrl" +- reg: Physical base address and length of the registers of controller +- reg-names: The names of register regions. The following regions are required: + * "dsi_ctrl" +- interrupts: The interrupt signal from the DSI block. +- power-domains: Should be <&mmcc MDSS_GDSC>. +- clocks: Phandles to device clocks. +- clock-names: the following clocks are required: + * "mdp_core" + * "iface" + * "bus" + * "core_mmss" + * "byte" + * "pixel" + * "core" + For DSIv2, we need an additional clock: + * "src" + For DSI6G v2.0 onwards, we need also need the clock: + * "byte_intf" +- assigned-clocks: Parents of "byte" and "pixel" for the given platform. +- assigned-clock-parents: The Byte clock and Pixel clock PLL outputs provided + by a DSI PHY block. See [1] for details on clock bindings. +- vdd-supply: phandle to vdd regulator device node +- vddio-supply: phandle to vdd-io regulator device node +- vdda-supply: phandle to vdda regulator device node +- phys: phandle to DSI PHY device node +- phy-names: the name of the corresponding PHY device +- syscon-sfpb: A phandle to mmss_sfpb syscon node (only for DSIv2) +- ports: Contains 2 DSI controller ports as child nodes. Each port contains + an endpoint subnode as defined in [2] and [3]. + +Optional properties: +- panel@0: Node of panel connected to this DSI controller. + See files in [4] for each supported panel. +- qcom,dual-dsi-mode: Boolean value indicating if the DSI controller is + driving a panel which needs 2 DSI links. +- qcom,master-dsi: Boolean value indicating if the DSI controller is driving + the master link of the 2-DSI panel. +- qcom,sync-dual-dsi: Boolean value indicating if the DSI controller is + driving a 2-DSI panel whose 2 links need receive command simultaneously. +- pinctrl-names: the pin control state names; should contain "default" +- pinctrl-0: the default pinctrl state (active) +- pinctrl-n: the "sleep" pinctrl state +- ports: contains DSI controller input and output ports as children, each + containing one endpoint subnode. + + DSI Endpoint properties: + - remote-endpoint: For port@0, set to phandle of the connected panel/bridge's + input endpoint. For port@1, set to the MDP interface output. See [2] for + device graph info. + + - data-lanes: this describes how the physical DSI data lanes are mapped + to the logical lanes on the given platform. The value contained in + index n describes what physical lane is mapped to the logical lane n + (DATAn, where n lies between 0 and 3). The clock lane position is fixed + and can't be changed. Hence, they aren't a part of the DT bindings. See + [3] for more info on the data-lanes property. + + For example: + + data-lanes = <3 0 1 2>; + + The above mapping describes that the logical data lane DATA0 is mapped to + the physical data lane DATA3, logical DATA1 to physical DATA0, logic DATA2 + to phys DATA1 and logic DATA3 to phys DATA2. + + There are only a limited number of physical to logical mappings possible: + <0 1 2 3> + <1 2 3 0> + <2 3 0 1> + <3 0 1 2> + <0 3 2 1> + <1 0 3 2> + <2 1 0 3> + <3 2 1 0> + +DSI PHY: +Required properties: +- compatible: Could be the following + * "qcom,dsi-phy-28nm-hpm" + * "qcom,dsi-phy-28nm-lp" + * "qcom,dsi-phy-20nm" + * "qcom,dsi-phy-28nm-8960" + * "qcom,dsi-phy-14nm" + * "qcom,dsi-phy-14nm-660" + * "qcom,dsi-phy-10nm" + * "qcom,dsi-phy-10nm-8998" + * "qcom,dsi-phy-7nm" + * "qcom,dsi-phy-7nm-8150" +- reg: Physical base address and length of the registers of PLL, PHY. Some + revisions require the PHY regulator base address, whereas others require the + PHY lane base address. See below for each PHY revision. +- reg-names: The names of register regions. The following regions are required: + For DSI 28nm HPM/LP/8960 PHYs and 20nm PHY: + * "dsi_pll" + * "dsi_phy" + * "dsi_phy_regulator" + For DSI 14nm, 10nm and 7nm PHYs: + * "dsi_pll" + * "dsi_phy" + * "dsi_phy_lane" +- clock-cells: Must be 1. The DSI PHY block acts as a clock provider, creating + 2 clocks: A byte clock (index 0), and a pixel clock (index 1). +- power-domains: Should be <&mmcc MDSS_GDSC>. +- clocks: Phandles to device clocks. See [1] for details on clock bindings. +- clock-names: the following clocks are required: + * "iface" + * "ref" (only required for new DTS files/entries) + For 28nm HPM/LP, 28nm 8960 PHYs: +- vddio-supply: phandle to vdd-io regulator device node + For 20nm PHY: +- vddio-supply: phandle to vdd-io regulator device node +- vcca-supply: phandle to vcca regulator device node + For 14nm PHY: +- vcca-supply: phandle to vcca regulator device node + For 10nm and 7nm PHY: +- vdds-supply: phandle to vdds regulator device node + +Optional properties: +- qcom,dsi-phy-regulator-ldo-mode: Boolean value indicating if the LDO mode PHY + regulator is wanted. +- qcom,mdss-mdp-transfer-time-us: Specifies the dsi transfer time for command mode + panels in microseconds. Driver uses this number to adjust + the clock rate according to the expected transfer time. + Increasing this value would slow down the mdp processing + and can result in slower performance. + Decreasing this value can speed up the mdp processing, + but this can also impact power consumption. + As a rule this time should not be higher than the time + that would be expected with the processing at the + dsi link rate since anyways this would be the maximum + transfer time that could be achieved. + If ping pong split is enabled, this time should not be higher + than two times the dsi link rate time. + If the property is not specified, then the default value is 14000 us. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt +[2] Documentation/devicetree/bindings/graph.txt +[3] Documentation/devicetree/bindings/media/video-interfaces.txt +[4] Documentation/devicetree/bindings/display/panel/ + +Example: + dsi0: dsi@fd922800 { + compatible = "qcom,mdss-dsi-ctrl"; + qcom,dsi-host-index = <0>; + interrupt-parent = <&mdp>; + interrupts = <4 0>; + reg-names = "dsi_ctrl"; + reg = <0xfd922800 0x200>; + power-domains = <&mmcc MDSS_GDSC>; + clock-names = + "bus", + "byte", + "core", + "core_mmss", + "iface", + "mdp_core", + "pixel"; + clocks = + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_BYTE0_CLK>, + <&mmcc MDSS_ESC0_CLK>, + <&mmcc MMSS_MISC_AHB_CLK>, + <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_PCLK0_CLK>; + + assigned-clocks = + <&mmcc BYTE0_CLK_SRC>, + <&mmcc PCLK0_CLK_SRC>; + assigned-clock-parents = + <&dsi_phy0 0>, + <&dsi_phy0 1>; + + vdda-supply = <&pma8084_l2>; + vdd-supply = <&pma8084_l22>; + vddio-supply = <&pma8084_l12>; + + phys = <&dsi_phy0>; + phy-names ="dsi-phy"; + + qcom,dual-dsi-mode; + qcom,master-dsi; + qcom,sync-dual-dsi; + + qcom,mdss-mdp-transfer-time-us = <12000>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&dsi_active>; + pinctrl-1 = <&dsi_suspend>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&mdp_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; + }; + }; + }; + + panel: panel@0 { + compatible = "sharp,lq101r1sx01"; + reg = <0>; + link2 = <&secondary>; + + power-supply = <...>; + backlight = <...>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + }; + + dsi_phy0: dsi-phy@fd922a00 { + compatible = "qcom,dsi-phy-28nm-hpm"; + qcom,dsi-phy-index = <0>; + reg-names = + "dsi_pll", + "dsi_phy", + "dsi_phy_regulator"; + reg = <0xfd922a00 0xd4>, + <0xfd922b00 0x2b0>, + <0xfd922d80 0x7b>; + clock-names = "iface"; + clocks = <&mmcc MDSS_AHB_CLK>; + #clock-cells = <1>; + vddio-supply = <&pma8084_l12>; + + qcom,dsi-phy-regulator-ldo-mode; + }; diff --git a/Documentation/devicetree/bindings/display/msm/edp.txt b/Documentation/devicetree/bindings/display/msm/edp.txt new file mode 100644 index 000000000..eff9daff4 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/edp.txt @@ -0,0 +1,56 @@ +Qualcomm Technologies Inc. adreno/snapdragon eDP output + +Required properties: +- compatible: + * "qcom,mdss-edp" +- reg: Physical base address and length of the registers of controller and PLL +- reg-names: The names of register regions. The following regions are required: + * "edp" + * "pll_base" +- interrupts: The interrupt signal from the eDP block. +- power-domains: Should be <&mmcc MDSS_GDSC>. +- clocks: device clocks + See Documentation/devicetree/bindings/clock/clock-bindings.txt for details. +- clock-names: the following clocks are required: + * "core" + * "iface" + * "mdp_core" + * "pixel" + * "link" +- #clock-cells: The value should be 1. +- vdda-supply: phandle to vdda regulator device node +- lvl-vdd-supply: phandle to regulator device node which is used to supply power + to HPD receiving chip +- panel-en-gpios: GPIO pin to supply power to panel. +- panel-hpd-gpios: GPIO pin used for eDP hpd. + + +Example: + mdss_edp: qcom,mdss_edp@fd923400 { + compatible = "qcom,mdss-edp"; + reg-names = + "edp", + "pll_base"; + reg = <0xfd923400 0x700>, + <0xfd923a00 0xd4>; + interrupt-parent = <&mdss_mdp>; + interrupts = <12 0>; + power-domains = <&mmcc MDSS_GDSC>; + clock-names = + "core", + "pixel", + "iface", + "link", + "mdp_core"; + clocks = + <&mmcc MDSS_EDPAUX_CLK>, + <&mmcc MDSS_EDPPIXEL_CLK>, + <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_EDPLINK_CLK>, + <&mmcc MDSS_MDP_CLK>; + #clock-cells = <1>; + vdda-supply = <&pma8084_l12>; + lvl-vdd-supply = <&lvl_vreg>; + panel-en-gpios = <&tlmm 137 0>; + panel-hpd-gpios = <&tlmm 103 0>; + }; diff --git a/Documentation/devicetree/bindings/display/msm/gmu.yaml b/Documentation/devicetree/bindings/display/msm/gmu.yaml new file mode 100644 index 000000000..fe55611d2 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/gmu.yaml @@ -0,0 +1,125 @@ +# SPDX-License-Identifier: GPL-2.0-only +# Copyright 2019-2020, The Linux Foundation, All Rights Reserved +%YAML 1.2 +--- + +$id: "http://devicetree.org/schemas/display/msm/gmu.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Devicetree bindings for the GMU attached to certain Adreno GPUs + +maintainers: + - Rob Clark <robdclark@gmail.com> + +description: | + These bindings describe the Graphics Management Unit (GMU) that is attached + to members of the Adreno A6xx GPU family. The GMU provides on-device power + management and support to improve power efficiency and reduce the load on + the CPU. + +properties: + compatible: + items: + - enum: + - qcom,adreno-gmu-630.2 + - const: qcom,adreno-gmu + + reg: + items: + - description: Core GMU registers + - description: GMU PDC registers + - description: GMU PDC sequence registers + + reg-names: + items: + - const: gmu + - const: gmu_pdc + - const: gmu_pdc_seq + + clocks: + items: + - description: GMU clock + - description: GPU CX clock + - description: GPU AXI clock + - description: GPU MEMNOC clock + + clock-names: + items: + - const: gmu + - const: cxo + - const: axi + - const: memnoc + + interrupts: + items: + - description: GMU HFI interrupt + - description: GMU interrupt + + + interrupt-names: + items: + - const: hfi + - const: gmu + + power-domains: + items: + - description: CX power domain + - description: GX power domain + + power-domain-names: + items: + - const: cx + - const: gx + + iommus: + maxItems: 1 + + operating-points-v2: true + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - interrupts + - interrupt-names + - power-domains + - power-domain-names + - iommus + - operating-points-v2 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gpucc-sdm845.h> + #include <dt-bindings/clock/qcom,gcc-sdm845.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + gmu: gmu@506a000 { + compatible="qcom,adreno-gmu-630.2", "qcom,adreno-gmu"; + + reg = <0x506a000 0x30000>, + <0xb280000 0x10000>, + <0xb480000 0x10000>; + reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq"; + + clocks = <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_CXO_CLK>, + <&gcc GCC_DDRSS_GPU_AXI_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>; + clock-names = "gmu", "cxo", "axi", "memnoc"; + + interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hfi", "gmu"; + + power-domains = <&gpucc GPU_CX_GDSC>, + <&gpucc GPU_GX_GDSC>; + power-domain-names = "cx", "gx"; + + iommus = <&adreno_smmu 5>; + operating-points-v2 = <&gmu_opp_table>; + }; diff --git a/Documentation/devicetree/bindings/display/msm/gpu.txt b/Documentation/devicetree/bindings/display/msm/gpu.txt new file mode 100644 index 000000000..1af0ff102 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/gpu.txt @@ -0,0 +1,150 @@ +Qualcomm adreno/snapdragon GPU + +Required properties: +- compatible: "qcom,adreno-XYZ.W", "qcom,adreno" or + "amd,imageon-XYZ.W", "amd,imageon" + for example: "qcom,adreno-306.0", "qcom,adreno" + Note that you need to list the less specific "qcom,adreno" (since this + is what the device is matched on), in addition to the more specific + with the chip-id. + If "amd,imageon" is used, there should be no top level msm device. +- reg: Physical base address and length of the controller's registers. +- interrupts: The interrupt signal from the gpu. +- clocks: device clocks (if applicable) + See ../clocks/clock-bindings.txt for details. +- clock-names: the following clocks are required by a3xx, a4xx and a5xx + cores: + * "core" + * "iface" + * "mem_iface" + For GMU attached devices the GPU clocks are not used and are not required. The + following devices should not list clocks: + - qcom,adreno-630.2 +- iommus: optional phandle to an adreno iommu instance +- operating-points-v2: optional phandle to the OPP operating points +- interconnects: optional phandle to an interconnect provider. See + ../interconnect/interconnect.txt for details. Some A3xx and all A4xx platforms + will have two paths; all others will have one path. +- interconnect-names: The names of the interconnect paths that correspond to the + interconnects property. Values must be gfx-mem and ocmem. +- qcom,gmu: For GMU attached devices a phandle to the GMU device that will + control the power for the GPU. Applicable targets: + - qcom,adreno-630.2 +- zap-shader: For a5xx and a6xx devices this node contains a memory-region that + points to reserved memory to store the zap shader that can be used to help + bring the GPU out of secure mode. +- firmware-name: optional property of the 'zap-shader' node, listing the + relative path of the device specific zap firmware. +- sram: phandle to the On Chip Memory (OCMEM) that's present on some a3xx and + a4xx Snapdragon SoCs. See + Documentation/devicetree/bindings/sram/qcom,ocmem.yaml. + +Example 3xx/4xx: + +/ { + ... + + gpu: adreno@fdb00000 { + compatible = "qcom,adreno-330.2", + "qcom,adreno"; + reg = <0xfdb00000 0x10000>; + reg-names = "kgsl_3d0_reg_memory"; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "kgsl_3d0_irq"; + clock-names = "core", + "iface", + "mem_iface"; + clocks = <&mmcc OXILI_GFX3D_CLK>, + <&mmcc OXILICX_AHB_CLK>, + <&mmcc OXILICX_AXI_CLK>; + sram = <&gpu_sram>; + power-domains = <&mmcc OXILICX_GDSC>; + operating-points-v2 = <&gpu_opp_table>; + iommus = <&gpu_iommu 0>; + }; + + gpu_sram: ocmem@fdd00000 { + compatible = "qcom,msm8974-ocmem"; + + reg = <0xfdd00000 0x2000>, + <0xfec00000 0x180000>; + reg-names = "ctrl", + "mem"; + + clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>, + <&mmcc OCMEMCX_OCMEMNOC_CLK>; + clock-names = "core", + "iface"; + + #address-cells = <1>; + #size-cells = <1>; + + gpu_sram: gpu-sram@0 { + reg = <0x0 0x100000>; + ranges = <0 0 0xfec00000 0x100000>; + }; + }; +}; + +Example a6xx (with GMU): + +/ { + ... + + gpu@5000000 { + compatible = "qcom,adreno-630.2", "qcom,adreno"; + #stream-id-cells = <16>; + + reg = <0x5000000 0x40000>, <0x509e000 0x10>; + reg-names = "kgsl_3d0_reg_memory", "cx_mem"; + + /* + * Look ma, no clocks! The GPU clocks and power are + * controlled entirely by the GMU + */ + + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; + + iommus = <&adreno_smmu 0>; + + operating-points-v2 = <&gpu_opp_table>; + + interconnects = <&rsc_hlos MASTER_GFX3D &rsc_hlos SLAVE_EBI1>; + interconnect-names = "gfx-mem"; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-430000000 { + opp-hz = /bits/ 64 <430000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + opp-peak-kBps = <5412000>; + }; + + opp-355000000 { + opp-hz = /bits/ 64 <355000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + opp-peak-kBps = <3072000>; + }; + + opp-267000000 { + opp-hz = /bits/ 64 <267000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + opp-peak-kBps = <3072000>; + }; + + opp-180000000 { + opp-hz = /bits/ 64 <180000000>; + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + opp-peak-kBps = <1804000>; + }; + }; + + qcom,gmu = <&gmu>; + + zap-shader { + memory-region = <&zap_shader_region>; + firmware-name = "qcom/LENOVO/81JL/qcdxkmsuc850.mbn" + }; + }; +}; diff --git a/Documentation/devicetree/bindings/display/msm/hdmi.txt b/Documentation/devicetree/bindings/display/msm/hdmi.txt new file mode 100644 index 000000000..5f90a40da --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/hdmi.txt @@ -0,0 +1,99 @@ +Qualcomm adreno/snapdragon hdmi output + +Required properties: +- compatible: one of the following + * "qcom,hdmi-tx-8996" + * "qcom,hdmi-tx-8994" + * "qcom,hdmi-tx-8084" + * "qcom,hdmi-tx-8974" + * "qcom,hdmi-tx-8660" + * "qcom,hdmi-tx-8960" +- reg: Physical base address and length of the controller's registers +- reg-names: "core_physical" +- interrupts: The interrupt signal from the hdmi block. +- power-domains: Should be <&mmcc MDSS_GDSC>. +- clocks: device clocks + See ../clocks/clock-bindings.txt for details. +- core-vdda-supply: phandle to supply regulator +- hdmi-mux-supply: phandle to mux regulator +- phys: the phandle for the HDMI PHY device +- phy-names: the name of the corresponding PHY device + +Optional properties: +- hpd-gpios: hpd pin +- qcom,hdmi-tx-mux-en-gpios: hdmi mux enable pin +- qcom,hdmi-tx-mux-sel-gpios: hdmi mux select pin +- qcom,hdmi-tx-mux-lpm-gpios: hdmi mux lpm pin +- power-domains: reference to the power domain(s), if available. +- pinctrl-names: the pin control state names; should contain "default" +- pinctrl-0: the default pinctrl state (active) +- pinctrl-1: the "sleep" pinctrl state + +HDMI PHY: +Required properties: +- compatible: Could be the following + * "qcom,hdmi-phy-8660" + * "qcom,hdmi-phy-8960" + * "qcom,hdmi-phy-8974" + * "qcom,hdmi-phy-8084" + * "qcom,hdmi-phy-8996" +- #phy-cells: Number of cells in a PHY specifier; Should be 0. +- reg: Physical base address and length of the registers of the PHY sub blocks. +- reg-names: The names of register regions. The following regions are required: + * "hdmi_phy" + * "hdmi_pll" + For HDMI PHY on msm8996, these additional register regions are required: + * "hdmi_tx_l0" + * "hdmi_tx_l1" + * "hdmi_tx_l3" + * "hdmi_tx_l4" +- power-domains: Should be <&mmcc MDSS_GDSC>. +- clocks: device clocks + See Documentation/devicetree/bindings/clock/clock-bindings.txt for details. +- core-vdda-supply: phandle to vdda regulator device node + +Example: + +/ { + ... + + hdmi: hdmi@4a00000 { + compatible = "qcom,hdmi-tx-8960"; + reg-names = "core_physical"; + reg = <0x04a00000 0x2f0>; + interrupts = <GIC_SPI 79 0>; + power-domains = <&mmcc MDSS_GDSC>; + clock-names = + "core", + "master_iface", + "slave_iface"; + clocks = + <&mmcc HDMI_APP_CLK>, + <&mmcc HDMI_M_AHB_CLK>, + <&mmcc HDMI_S_AHB_CLK>; + qcom,hdmi-tx-ddc-clk = <&msmgpio 70 GPIO_ACTIVE_HIGH>; + qcom,hdmi-tx-ddc-data = <&msmgpio 71 GPIO_ACTIVE_HIGH>; + qcom,hdmi-tx-hpd = <&msmgpio 72 GPIO_ACTIVE_HIGH>; + core-vdda-supply = <&pm8921_hdmi_mvs>; + hdmi-mux-supply = <&ext_3p3v>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&hpd_active &ddc_active &cec_active>; + pinctrl-1 = <&hpd_suspend &ddc_suspend &cec_suspend>; + + phys = <&hdmi_phy>; + phy-names = "hdmi_phy"; + }; + + hdmi_phy: phy@4a00400 { + compatible = "qcom,hdmi-phy-8960"; + reg-names = "hdmi_phy", + "hdmi_pll"; + reg = <0x4a00400 0x60>, + <0x4a00500 0x100>; + #phy-cells = <0>; + power-domains = <&mmcc MDSS_GDSC>; + clock-names = "slave_iface"; + clocks = <&mmcc HDMI_S_AHB_CLK>; + core-vdda-supply = <&pm8921_hdmi_mvs>; + }; +}; diff --git a/Documentation/devicetree/bindings/display/msm/mdp4.txt b/Documentation/devicetree/bindings/display/msm/mdp4.txt new file mode 100644 index 000000000..b07eeb38f --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/mdp4.txt @@ -0,0 +1,114 @@ +Qualcomm adreno/snapdragon MDP4 display controller + +Description: + +This is the bindings documentation for the MDP4 display controller found in +SoCs like MSM8960, APQ8064 and MSM8660. + +Required properties: +- compatible: + * "qcom,mdp4" - mdp4 +- reg: Physical base address and length of the controller's registers. +- interrupts: The interrupt signal from the display controller. +- clocks: device clocks + See ../clocks/clock-bindings.txt for details. +- clock-names: the following clocks are required. + * "core_clk" + * "iface_clk" + * "bus_clk" + * "lut_clk" + * "hdmi_clk" + * "tv_clk" +- ports: contains the list of output ports from MDP. These connect to interfaces + that are external to the MDP hardware, such as HDMI, DSI, EDP etc (LVDS is a + special case since it is a part of the MDP block itself). + + Each output port contains an endpoint that describes how it is connected to an + external interface. These are described by the standard properties documented + here: + Documentation/devicetree/bindings/graph.txt + Documentation/devicetree/bindings/media/video-interfaces.txt + + The output port mappings are: + Port 0 -> LCDC/LVDS + Port 1 -> DSI1 Cmd/Video + Port 2 -> DSI2 Cmd/Video + Port 3 -> DTV + +Optional properties: +- clock-names: the following clocks are optional: + * "lut_clk" +- qcom,lcdc-align-lsb: Boolean value indicating that LSB alignment should be + used for LCDC. This is only valid for 18bpp panels. + +Example: + +/ { + ... + + hdmi: hdmi@4a00000 { + ... + ports { + ... + port@0 { + reg = <0>; + hdmi_in: endpoint { + remote-endpoint = <&mdp_dtv_out>; + }; + }; + ... + }; + ... + }; + + ... + + mdp: mdp@5100000 { + compatible = "qcom,mdp4"; + reg = <0x05100000 0xf0000>; + interrupts = <GIC_SPI 75 0>; + clock-names = + "core_clk", + "iface_clk", + "lut_clk", + "hdmi_clk", + "tv_clk"; + clocks = + <&mmcc MDP_CLK>, + <&mmcc MDP_AHB_CLK>, + <&mmcc MDP_AXI_CLK>, + <&mmcc MDP_LUT_CLK>, + <&mmcc HDMI_TV_CLK>, + <&mmcc MDP_TV_CLK>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdp_lvds_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + mdp_dsi1_out: endpoint { + }; + }; + + port@2 { + reg = <2>; + mdp_dsi2_out: endpoint { + }; + }; + + port@3 { + reg = <3>; + mdp_dtv_out: endpoint { + remote-endpoint = <&hdmi_in>; + }; + }; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/display/msm/mdp5.txt b/Documentation/devicetree/bindings/display/msm/mdp5.txt new file mode 100644 index 000000000..43d11279c --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/mdp5.txt @@ -0,0 +1,160 @@ +Qualcomm adreno/snapdragon MDP5 display controller + +Description: + +This is the bindings documentation for the Mobile Display Subsytem(MDSS) that +encapsulates sub-blocks like MDP5, DSI, HDMI, eDP etc, and the MDP5 display +controller found in SoCs like MSM8974, APQ8084, MSM8916, MSM8994 and MSM8996. + +MDSS: +Required properties: +- compatible: + * "qcom,mdss" - MDSS +- reg: Physical base address and length of the controller's registers. +- reg-names: The names of register regions. The following regions are required: + * "mdss_phys" + * "vbif_phys" +- interrupts: The interrupt signal from MDSS. +- interrupt-controller: identifies the node as an interrupt controller. +- #interrupt-cells: specifies the number of cells needed to encode an interrupt + source, should be 1. +- power-domains: a power domain consumer specifier according to + Documentation/devicetree/bindings/power/power_domain.txt +- clocks: device clocks. See ../clocks/clock-bindings.txt for details. +- clock-names: the following clocks are required. + * "iface" + * "bus" + * "vsync" +- #address-cells: number of address cells for the MDSS children. Should be 1. +- #size-cells: Should be 1. +- ranges: parent bus address space is the same as the child bus address space. + +Optional properties: +- clock-names: the following clocks are optional: + * "lut" + +MDP5: +Required properties: +- compatible: + * "qcom,mdp5" - MDP5 +- reg: Physical base address and length of the controller's registers. +- reg-names: The names of register regions. The following regions are required: + * "mdp_phys" +- interrupts: Interrupt line from MDP5 to MDSS interrupt controller. +- clocks: device clocks. See ../clocks/clock-bindings.txt for details. +- clock-names: the following clocks are required. +- * "bus" +- * "iface" +- * "core" +- * "vsync" +- ports: contains the list of output ports from MDP. These connect to interfaces + that are external to the MDP hardware, such as HDMI, DSI, EDP etc (LVDS is a + special case since it is a part of the MDP block itself). + + Each output port contains an endpoint that describes how it is connected to an + external interface. These are described by the standard properties documented + here: + Documentation/devicetree/bindings/graph.txt + Documentation/devicetree/bindings/media/video-interfaces.txt + + The availability of output ports can vary across SoC revisions: + + For MSM8974 and APQ8084: + Port 0 -> MDP_INTF0 (eDP) + Port 1 -> MDP_INTF1 (DSI1) + Port 2 -> MDP_INTF2 (DSI2) + Port 3 -> MDP_INTF3 (HDMI) + + For MSM8916: + Port 0 -> MDP_INTF1 (DSI1) + + For MSM8994 and MSM8996: + Port 0 -> MDP_INTF1 (DSI1) + Port 1 -> MDP_INTF2 (DSI2) + Port 2 -> MDP_INTF3 (HDMI) + +Optional properties: +- clock-names: the following clocks are optional: + * "lut" + * "tbu" + * "tbu_rt" + +Example: + +/ { + ... + + mdss: mdss@1a00000 { + compatible = "qcom,mdss"; + reg = <0x1a00000 0x1000>, + <0x1ac8000 0x3000>; + reg-names = "mdss_phys", "vbif_phys"; + + power-domains = <&gcc MDSS_GDSC>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "vsync" + + interrupts = <0 72 0>; + + interrupt-controller; + #interrupt-cells = <1>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mdp: mdp@1a01000 { + compatible = "qcom,mdp5"; + reg = <0x1a01000 0x90000>; + reg-names = "mdp_phys"; + + interrupt-parent = <&mdss>; + interrupts = <0 0>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "core", + "vsync"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdp5_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + }; + }; + + dsi0: dsi@1a98000 { + ... + ports { + ... + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&mdp5_intf1_out>; + }; + }; + ... + }; + ... + }; + + dsi_phy0: dsi-phy@1a98300 { + ... + }; + }; +}; diff --git a/Documentation/devicetree/bindings/display/multi-inno,mi0283qt.txt b/Documentation/devicetree/bindings/display/multi-inno,mi0283qt.txt new file mode 100644 index 000000000..eed48c3d4 --- /dev/null +++ b/Documentation/devicetree/bindings/display/multi-inno,mi0283qt.txt @@ -0,0 +1,27 @@ +Multi-Inno MI0283QT display panel + +Required properties: +- compatible: "multi-inno,mi0283qt". + +The node for this driver must be a child node of a SPI controller, hence +all mandatory properties described in ../spi/spi-bus.txt must be specified. + +Optional properties: +- dc-gpios: D/C pin. The presence/absence of this GPIO determines + the panel interface mode (IM[3:0] pins): + - present: IM=x110 4-wire 8-bit data serial interface + - absent: IM=x101 3-wire 9-bit data serial interface +- reset-gpios: Reset pin +- power-supply: A regulator node for the supply voltage. +- backlight: phandle of the backlight device attached to the panel +- rotation: panel rotation in degrees counter clockwise (0,90,180,270) + +Example: + mi0283qt@0{ + compatible = "multi-inno,mi0283qt"; + reg = <0>; + spi-max-frequency = <32000000>; + rotation = <90>; + dc-gpios = <&gpio 25 0>; + backlight = <&backlight>; + }; diff --git a/Documentation/devicetree/bindings/display/mxsfb.txt b/Documentation/devicetree/bindings/display/mxsfb.txt new file mode 100644 index 000000000..c985871c4 --- /dev/null +++ b/Documentation/devicetree/bindings/display/mxsfb.txt @@ -0,0 +1,87 @@ +* Freescale MXS LCD Interface (LCDIF) + +New bindings: +============= +Required properties: +- compatible: Should be "fsl,imx23-lcdif" for i.MX23. + Should be "fsl,imx28-lcdif" for i.MX28. + Should be "fsl,imx6sx-lcdif" for i.MX6SX. + Should be "fsl,imx8mq-lcdif" for i.MX8MQ. +- reg: Address and length of the register set for LCDIF +- interrupts: Should contain LCDIF interrupt +- clocks: A list of phandle + clock-specifier pairs, one for each + entry in 'clock-names'. +- clock-names: A list of clock names. For MXSFB it should contain: + - "pix" for the LCDIF block clock + - (MX6SX-only) "axi", "disp_axi" for the bus interface clock + +Required sub-nodes: + - port: The connection to an encoder chip. + +Example: + + lcdif1: display-controller@2220000 { + compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif"; + reg = <0x02220000 0x4000>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_LCDIF1_PIX>, + <&clks IMX6SX_CLK_LCDIF_APB>, + <&clks IMX6SX_CLK_DISPLAY_AXI>; + clock-names = "pix", "axi", "disp_axi"; + + port { + parallel_out: endpoint { + remote-endpoint = <&panel_in_parallel>; + }; + }; + }; + +Deprecated bindings: +==================== +Required properties: +- compatible: Should be "fsl,imx23-lcdif" for i.MX23. + Should be "fsl,imx28-lcdif" for i.MX28. +- reg: Address and length of the register set for LCDIF +- interrupts: Should contain LCDIF interrupts +- display: phandle to display node (see below for details) + +* display node + +Required properties: +- bits-per-pixel: <16> for RGB565, <32> for RGB888/666. +- bus-width: number of data lines. Could be <8>, <16>, <18> or <24>. + +Required sub-node: +- display-timings: Refer to binding doc display-timing.txt for details. + +Examples: + +lcdif@80030000 { + compatible = "fsl,imx28-lcdif"; + reg = <0x80030000 2000>; + interrupts = <38 86>; + + display: display { + bits-per-pixel = <32>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <33500000>; + hactive = <800>; + vactive = <480>; + hfront-porch = <164>; + hback-porch = <89>; + hsync-len = <10>; + vback-porch = <23>; + vfront-porch = <10>; + vsync-len = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/display/panel/advantech,idk-1110wr.yaml b/Documentation/devicetree/bindings/display/panel/advantech,idk-1110wr.yaml new file mode 100644 index 000000000..93878c2cd --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/advantech,idk-1110wr.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/advantech,idk-1110wr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Advantech IDK-1110WR 10.1" WSVGA LVDS Display Panel + +maintainers: + - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> + - Thierry Reding <thierry.reding@gmail.com> + +allOf: + - $ref: lvds.yaml# + +properties: + compatible: + items: + - const: advantech,idk-1110wr + - {} # panel-lvds, but not listed here to avoid false select + + data-mapping: + const: jeida-24 + + width-mm: + const: 223 + + height-mm: + const: 125 + + panel-timing: true + port: true + +additionalProperties: false + +required: + - compatible + +examples: + - |+ + panel { + compatible = "advantech,idk-1110wr", "panel-lvds"; + + width-mm = <223>; + height-mm = <125>; + + data-mapping = "jeida-24"; + + panel-timing { + /* 1024x600 @60Hz */ + clock-frequency = <51200000>; + hactive = <1024>; + vactive = <600>; + hsync-len = <240>; + hfront-porch = <40>; + hback-porch = <40>; + vsync-len = <10>; + vfront-porch = <15>; + vback-porch = <10>; + }; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds_encoder>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.yaml b/Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.yaml new file mode 100644 index 000000000..6b7fddc80 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.yaml @@ -0,0 +1,122 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/advantech,idk-2121wr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Advantech IDK-2121WR 21.5" Full-HD dual-LVDS panel + +maintainers: + - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> + - Thierry Reding <thierry.reding@gmail.com> + +description: | + The IDK-2121WR from Advantech is a Full-HD dual-LVDS panel. + A dual-LVDS interface is a dual-link connection with even pixels traveling + on one link, and with odd pixels traveling on the other link. + + The panel expects odd pixels on the first port, and even pixels on the + second port, therefore the ports must be marked accordingly (with either + dual-lvds-odd-pixels or dual-lvds-even-pixels). + +properties: + compatible: + items: + - const: advantech,idk-2121wr + - {} # panel-lvds, but not listed here to avoid false select + + width-mm: + const: 476 + + height-mm: + const: 268 + + data-mapping: + const: vesa-24 + + panel-timing: true + + ports: + type: object + properties: + port@0: + type: object + description: The sink for odd pixels. + properties: + reg: + const: 0 + + dual-lvds-odd-pixels: true + + required: + - reg + - dual-lvds-odd-pixels + + port@1: + type: object + description: The sink for even pixels. + properties: + reg: + const: 1 + + dual-lvds-even-pixels: true + + required: + - reg + - dual-lvds-even-pixels + +additionalProperties: false + +required: + - compatible + - width-mm + - height-mm + - data-mapping + - panel-timing + - ports + +examples: + - |+ + panel-lvds { + compatible = "advantech,idk-2121wr", "panel-lvds"; + + width-mm = <476>; + height-mm = <268>; + + data-mapping = "vesa-24"; + + panel-timing { + clock-frequency = <148500000>; + hactive = <1920>; + vactive = <1080>; + hsync-len = <44>; + hfront-porch = <88>; + hback-porch = <148>; + vfront-porch = <4>; + vback-porch = <36>; + vsync-len = <5>; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dual-lvds-odd-pixels; + panel_in0: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + + port@1 { + reg = <1>; + dual-lvds-even-pixels; + panel_in1: endpoint { + remote-endpoint = <&lvds1_out>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.yaml b/Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.yaml new file mode 100644 index 000000000..be69e0cc5 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/arm,versatile-tft-panel.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Versatile TFT Panels + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: | + These panels are connected to the daughterboards found on the + ARM Versatile reference designs. + + This device node must appear as a child to a "syscon"-compatible + node. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: arm,versatile-tft-panel + + port: true + +required: + - compatible + - port + +additionalProperties: false + +examples: + - | + sysreg@0 { + compatible = "arm,versatile-sysreg", "syscon", "simple-mfd"; + reg = <0x00000 0x1000>; + + #address-cells = <1>; + #size-cells = <0>; + + panel { + compatible = "arm,versatile-tft-panel"; + + port { + panel_in: endpoint { + remote-endpoint = <&foo>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/armadeus,st0700-adapt.yaml b/Documentation/devicetree/bindings/display/panel/armadeus,st0700-adapt.yaml new file mode 100644 index 000000000..a6ade4706 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/armadeus,st0700-adapt.yaml @@ -0,0 +1,33 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/armadeus,st0700-adapt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Armadeus ST0700 Adapter + +description: + A Santek ST0700I5Y-RBSLW 7.0" WVGA (800x480) TFT with an adapter board. + +maintainers: + - '"Sébastien Szymanski" <sebastien.szymanski@armadeus.com>' + - Thierry Reding <thierry.reding@gmail.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: armadeus,st0700-adapt + + power-supply: true + backlight: true + port: true + +additionalProperties: false + +required: + - compatible + - power-supply + +... diff --git a/Documentation/devicetree/bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml b/Documentation/devicetree/bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml new file mode 100644 index 000000000..75a09df68 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/asus,z00t-tm5p5-nt35596.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ASUS Z00T TM5P5 NT35596 5.5" 1080×1920 LCD Panel + +maintainers: + - Konrad Dybcio <konradybcio@gmail.com> + +description: |+ + This panel seems to only be found in the Asus Z00T + smartphone and we have no straightforward way of + actually getting the correct model number, + as no schematics are released publicly. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: asus,z00t-tm5p5-n35596 + reg: true + reset-gpios: true + vdd-supply: + description: core voltage supply + vddio-supply: + description: vddio supply + +required: + - compatible + - reg + - vdd-supply + - vddio-supply + - reset-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + reg = <0>; + + compatible = "asus,z00t-tm5p5-n35596"; + + vdd-supply = <&pm8916_l8>; + vddio-supply = <&pm8916_l6>; + reset-gpios = <&msmgpio 25 GPIO_ACTIVE_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.yaml b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.yaml new file mode 100644 index 000000000..bbf127fb2 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.yaml @@ -0,0 +1,31 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/bananapi,s070wv20-ct16.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Banana Pi 7" (S070WV20-CT16) TFT LCD Panel + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Thierry Reding <thierry.reding@gmail.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: bananapi,s070wv20-ct16 + + power-supply: true + backlight: true + enable-gpios: true + port: true + +additionalProperties: false + +required: + - compatible + - power-supply + +... diff --git a/Documentation/devicetree/bindings/display/panel/boe,himax8279d.yaml b/Documentation/devicetree/bindings/display/panel/boe,himax8279d.yaml new file mode 100644 index 000000000..272a3a018 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/boe,himax8279d.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/boe,himax8279d.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Boe Himax8279d 1200x1920 TFT LCD panel + +maintainers: + - Jerry Han <jerry.han.hq@gmail.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - const: boe,himax8279d8p + - const: boe,himax8279d10p + + backlight: true + enable-gpios: true + reg: true + + pp33-gpios: + maxItems: 1 + description: GPIO for the 3.3v pin that provides the supply voltage + + pp18-gpios: + maxItems: 1 + description: GPIO for the 1.8v pin that provides the supply voltage + +required: + - compatible + - reg + - enable-gpios + - pp33-gpios + - pp18-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "boe,himax8279d8p", "boe,himax8279d10p"; + reg = <0>; + backlight = <&backlight>; + enable-gpios = <&gpio 45 GPIO_ACTIVE_HIGH>; + pp33-gpios = <&gpio 35 GPIO_ACTIVE_HIGH>; + pp18-gpios = <&gpio 36 GPIO_ACTIVE_HIGH>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml new file mode 100644 index 000000000..38bc1d1b5 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/boe,tv101wum-nl6.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: BOE TV101WUM-NL6 DSI Display Panel + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Sam Ravnborg <sam@ravnborg.org> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + enum: + # BOE TV101WUM-NL6 10.1" WUXGA TFT LCD panel + - boe,tv101wum-nl6 + # AUO KD101N80-45NA 10.1" WUXGA TFT LCD panel + - auo,kd101n80-45na + # BOE TV101WUM-N53 10.1" WUXGA TFT LCD panel + - boe,tv101wum-n53 + # AUO B101UAN08.3 10.1" WUXGA TFT LCD panel + - auo,b101uan08.3 + # BOE TV105WUM-NW0 10.5" WUXGA TFT LCD panel + - boe,tv105wum-nw0 + + reg: + description: the virtual channel number of a DSI peripheral + + enable-gpios: + description: a GPIO spec for the enable pin + + pp1800-supply: + description: core voltage supply + + avdd-supply: + description: phandle of the regulator that provides positive voltage + + avee-supply: + description: phandle of the regulator that provides negative voltage + + backlight: + description: phandle of the backlight device attached to the panel + + port: true + +required: + - compatible + - reg + - enable-gpios + - pp1800-supply + - avdd-supply + - avee-supply + +additionalProperties: false + +examples: + - | + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "boe,tv101wum-nl6"; + reg = <0>; + enable-gpios = <&pio 45 0>; + avdd-supply = <&ppvarn_lcd>; + avee-supply = <&ppvarp_lcd>; + pp1800-supply = <&pp1800_lcd>; + backlight = <&backlight_lcd0>; + status = "okay"; + port { + panel_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/display-timing.txt b/Documentation/devicetree/bindings/display/panel/display-timing.txt new file mode 100644 index 000000000..7f55ad4a4 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/display-timing.txt @@ -0,0 +1 @@ +See display-timings.yaml in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/display-timings.yaml b/Documentation/devicetree/bindings/display/panel/display-timings.yaml new file mode 100644 index 000000000..56903ded0 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/display-timings.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/display-timings.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: display timings bindings + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> + - Sam Ravnborg <sam@ravnborg.org> + +description: | + A display panel may be able to handle several display timings, + with different resolutions. + The display-timings node makes it possible to specify the timings + and to specify the timing that is native for the display. + +properties: + $nodename: + const: display-timings + + native-mode: + $ref: /schemas/types.yaml#/definitions/phandle + description: | + The default display timing is the one specified as native-mode. + If no native-mode is specified then the first node is assumed + to be the native mode. + +patternProperties: + "^timing": + type: object + allOf: + - $ref: panel-timing.yaml# + +additionalProperties: false + +examples: + - |+ + + /* + * Example that specifies panel timing using minimum, typical, + * maximum values as commonly used in datasheet description. + * timing1 is the native-mode. + */ + display-timings { + native-mode = <&timing1>; + timing0 { + /* 1920x1080p24 */ + clock-frequency = <148500000>; + hactive = <1920>; + vactive = <1080>; + hsync-len = <0 44 60>; + hfront-porch = <80 88 95>; + hback-porch = <100 148 160>; + vfront-porch = <0 4 6>; + vback-porch = <0 36 50>; + vsync-len = <0 5 6>; + }; + timing1 { + /* 1920x1080p24 */ + clock-frequency = <52000000>; + hactive = <1920>; + vactive = <1080>; + hfront-porch = <25>; + hback-porch = <25>; + hsync-len = <0 25 25>; + vback-porch = <2>; + vfront-porch = <2>; + vsync-len = <2>; + hsync-active = <1>; + pixelclk-active = <1>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/dlc,dlc0700yzg-1.yaml b/Documentation/devicetree/bindings/display/panel/dlc,dlc0700yzg-1.yaml new file mode 100644 index 000000000..287e2feb6 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/dlc,dlc0700yzg-1.yaml @@ -0,0 +1,31 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/dlc,dlc0700yzg-1.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: DLC Display Co. DLC0700YZG-1 7.0" WSVGA TFT LCD panel + +maintainers: + - Philipp Zabel <p.zabel@pengutronix.de> + - Thierry Reding <thierry.reding@gmail.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: dlc,dlc0700yzg-1 + + reset-gpios: true + enable-gpios: true + backlight: true + port: true + +additionalProperties: false + +required: + - compatible + - power-supply + +... diff --git a/Documentation/devicetree/bindings/display/panel/elida,kd35t133.yaml b/Documentation/devicetree/bindings/display/panel/elida,kd35t133.yaml new file mode 100644 index 000000000..7adb83e2e --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/elida,kd35t133.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/elida,kd35t133.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Elida KD35T133 3.5in 320x480 DSI panel + +maintainers: + - Heiko Stuebner <heiko.stuebner@theobroma-systems.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: elida,kd35t133 + reg: true + backlight: true + reset-gpios: true + iovcc-supply: + description: regulator that supplies the iovcc voltage + vdd-supply: + description: regulator that supplies the vdd voltage + +required: + - compatible + - reg + - backlight + - iovcc-supply + - vdd-supply + +additionalProperties: false + +examples: + - | + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "elida,kd35t133"; + reg = <0>; + backlight = <&backlight>; + iovcc-supply = <&vcc_1v8>; + vdd-supply = <&vcc3v3_lcd>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml b/Documentation/devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml new file mode 100644 index 000000000..81adb82f0 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/feixin,k101-im2ba02.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Feixin K101 IM2BA02 10.1" MIPI-DSI LCD panel + +maintainers: + - Icenowy Zheng <icenowy@aosc.io> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: feixin,k101-im2ba02 + reg: true + backlight: true + reset-gpios: true + avdd-supply: + description: regulator that supplies the AVDD voltage + dvdd-supply: + description: regulator that supplies the DVDD voltage + cvdd-supply: + description: regulator that supplies the CVDD voltage + +required: + - compatible + - reg + - avdd-supply + - dvdd-supply + - cvdd-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "feixin,k101-im2ba02"; + reg = <0>; + avdd-supply = <®_dc1sw>; + dvdd-supply = <®_dc1sw>; + cvdd-supply = <®_ldo_io1>; + reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; + backlight = <&backlight>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.yaml b/Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.yaml new file mode 100644 index 000000000..95acf9e96 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/feiyang,fy07024di26a30d.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Feiyang FY07024DI26A30-D 7" MIPI-DSI LCD Panel + +maintainers: + - Jagan Teki <jagan@amarulasolutions.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: feiyang,fy07024di26a30d + + reg: + description: DSI virtual channel used by that screen + maxItems: 1 + + avdd-supply: + description: analog regulator dc1 switch + + dvdd-supply: + description: 3v3 digital regulator + + reset-gpios: true + + backlight: true + +required: + - compatible + - reg + - avdd-supply + - dvdd-supply + - reset-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "feiyang,fy07024di26a30d"; + reg = <0>; + avdd-supply = <®_dc1sw>; + dvdd-supply = <®_dldo2>; + reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* LCD-RST: PD24 */ + backlight = <&backlight>; + }; + }; diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml new file mode 100644 index 000000000..e89c1ea62 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/ilitek,ili9322.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ilitek ILI9322 TFT panel driver with SPI control bus + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: | + This is a driver for 320x240 TFT panels, accepting a variety of input + streams that get adapted and scaled to the panel. The panel output has + 960 TFT source driver pins and 240 TFT gate driver pins, VCOM, VCOML and + VCOMH outputs. + + The panel must obey the rules for a SPI slave device as specified in + spi/spi-controller.yaml + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - enum: + - dlink,dir-685-panel + - const: ilitek,ili9322 + + reset-gpios: true + port: true + + vcc-supply: + description: Core voltage supply + + iovcc-supply: + description: Voltage supply for the interface input/output signals + + vci-supply: + description: Voltage supply for analog parts + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + panel: display@0 { + compatible = "dlink,dir-685-panel", "ilitek,ili9322"; + reg = <0>; + vcc-supply = <&vdisp>; + iovcc-supply = <&vdisp>; + vci-supply = <&vdisp>; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml new file mode 100644 index 000000000..b2fcec4f2 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/ilitek,ili9881c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ilitek ILI9881c based MIPI-DSI panels + +maintainers: + - Maxime Ripard <mripard@kernel.org> + +properties: + compatible: + items: + - enum: + - bananapi,lhr050h41 + - feixin,k101-im2byl02 + - const: ilitek,ili9881c + + backlight: true + power-supply: true + reg: true + reset-gpios: true + +required: + - compatible + - power-supply + - reg + - reset-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "bananapi,lhr050h41", "ilitek,ili9881c"; + reg = <0>; + power-supply = <®_display>; + reset-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL05 */ + backlight = <&pwm_bl>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/innolux,ee101ia-01d.yaml b/Documentation/devicetree/bindings/display/panel/innolux,ee101ia-01d.yaml new file mode 100644 index 000000000..a69681e72 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/innolux,ee101ia-01d.yaml @@ -0,0 +1,31 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/innolux,ee101ia-01d.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Innolux Corporation 10.1" EE101IA-01D WXGA (1280x800) LVDS panel + +maintainers: + - Heiko Stuebner <heiko.stuebner@bq.com> + - Thierry Reding <thierry.reding@gmail.com> + +allOf: + - $ref: lvds.yaml# + +properties: + compatible: + items: + - const: innolux,ee101ia-01d + - {} # panel-lvds, but not listed here to avoid false select + + backlight: true + enable-gpios: true + power-supply: true + width-mm: true + height-mm: true + panel-timing: true + port: true + +additionalProperties: false +... diff --git a/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.yaml b/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.yaml new file mode 100644 index 000000000..5a5f07162 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/innolux,p097pfg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Innolux P097PFG 9.7" 1536x2048 TFT LCD panel + +maintainers: + - Lin Huang <hl@rock-chips.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: innolux,p097pfg + + backlight: true + enable-gpios: true + reg: true + + avdd-supply: + description: The regulator that provides positive voltage + + avee-supply: + description: The regulator that provides negative voltage + +required: + - compatible + - reg + - avdd-supply + - avee-supply + - enable-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "innolux,p097pfg"; + reg = <0>; + avdd-supply = <&avdd>; + avee-supply = <&avee>; + backlight = <&backlight>; + enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/innolux,p120zdg-bf1.yaml b/Documentation/devicetree/bindings/display/panel/innolux,p120zdg-bf1.yaml new file mode 100644 index 000000000..243dac241 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/innolux,p120zdg-bf1.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/innolux,p120zdg-bf1.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Innolux P120ZDG-BF1 12.02 inch eDP 2K display panel + +maintainers: + - Sandeep Panda <spanda@codeaurora.org> + - Douglas Anderson <dianders@chromium.org> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: innolux,p120zdg-bf1 + + enable-gpios: true + power-supply: true + backlight: true + no-hpd: true + +required: + - compatible + - power-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + panel_edp: panel-edp { + compatible = "innolux,p120zdg-bf1"; + enable-gpios = <&msmgpio 31 GPIO_ACTIVE_LOW>; + power-supply = <&pm8916_l2>; + backlight = <&backlight>; + no-hpd; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml new file mode 100644 index 000000000..b8b9435e4 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/jdi,lt070me05000.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: JDI model LT070ME05000 1200x1920 7" DSI Panel + +maintainers: + - Vinay Simha BN <simhavcs@gmail.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: jdi,lt070me05000 + + enable-gpios: true + reg: true + reset-gpios: true + + vddp-supply: + description: | + The regulator that provides the supply voltage Power IC supply (3-5V) + + iovcc-supply: + description: | + The regulator that provides the supply voltage IOVCC, + power supply for LCM (1.8V) + + dcdc-en-gpios: + description: | + phandle of the gpio for power ic line + Power IC supply enable, High active + +required: + - compatible + - reg + - vddp-supply + - iovcc-supply + - enable-gpios + - reset-gpios + - dcdc-en-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "jdi,lt070me05000"; + reg = <0>; + + vddp-supply = <&pm8921_l17>; + iovcc-supply = <&pm8921_lvs7>; + + enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>; + reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>; + dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.yaml b/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.yaml new file mode 100644 index 000000000..696003697 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/kingdisplay,kd035g6-54nt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: King Display KD035G6-54NT 3.5" (320x240 pixels) 24-bit TFT LCD panel + +description: | + The panel must obey the rules for a SPI slave device as specified in + spi/spi-controller.yaml + +maintainers: + - Paul Cercueil <paul@crapouillou.net> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: kingdisplay,kd035g6-54nt + + backlight: true + port: true + power-supply: true + reg: true + reset-gpios: true + +required: + - compatible + - power-supply + - reset-gpios + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "kingdisplay,kd035g6-54nt"; + reg = <0>; + + spi-max-frequency = <3125000>; + spi-3wire; + spi-cs-high; + + reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>; + + backlight = <&backlight>; + power-supply = <&ldo6>; + + port { + panel_input: endpoint { + remote-endpoint = <&panel_output>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml b/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml new file mode 100644 index 000000000..3715882b6 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/leadtek,ltk050h3146w.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Leadtek LTK050H3146W 5.0in 720x1280 DSI panel + +maintainers: + - Heiko Stuebner <heiko.stuebner@theobroma-systems.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + enum: + - leadtek,ltk050h3146w + - leadtek,ltk050h3146w-a2 + reg: true + backlight: true + reset-gpios: true + iovcc-supply: + description: regulator that supplies the iovcc voltage + vci-supply: + description: regulator that supplies the vci voltage + +required: + - compatible + - reg + - backlight + - iovcc-supply + - vci-supply + +additionalProperties: false + +examples: + - | + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "leadtek,ltk050h3146w"; + reg = <0>; + backlight = <&backlight>; + iovcc-supply = <&vcc_1v8>; + vci-supply = <&vcc3v3_lcd>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml b/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml new file mode 100644 index 000000000..c5944b4d6 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/leadtek,ltk500hd1829.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Leadtek LTK500HD1829 5.0in 720x1280 DSI panel + +maintainers: + - Heiko Stuebner <heiko.stuebner@theobroma-systems.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: leadtek,ltk500hd1829 + reg: true + backlight: true + reset-gpios: true + iovcc-supply: + description: regulator that supplies the iovcc voltage + vcc-supply: + description: regulator that supplies the vcc voltage + +required: + - compatible + - reg + - backlight + - iovcc-supply + - vcc-supply + +additionalProperties: false + +examples: + - | + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "leadtek,ltk500hd1829"; + reg = <0>; + backlight = <&backlight>; + iovcc-supply = <&vcc_1v8>; + vcc-supply = <&vcc_2v8>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/lg,lg4573.yaml b/Documentation/devicetree/bindings/display/panel/lg,lg4573.yaml new file mode 100644 index 000000000..b4314ce7b --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/lg,lg4573.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/lg,lg4573.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LG LG4573 TFT Liquid Crystal Display with SPI control bus + +description: | + The panel must obey the rules for a SPI slave device as specified in + spi/spi-controller.yaml + +maintainers: + - Heiko Schocher <hs@denx.de> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: lg,lg4573 + + reg: true + spi-max-frequency: true + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + lcd_panel: display@0 { + compatible = "lg,lg4573"; + spi-max-frequency = <10000000>; + reg = <0>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml b/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml new file mode 100644 index 000000000..830e335dd --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/lgphilips,lb035q02.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LG.Philips LB035Q02 Panel + +description: | + The panel must obey the rules for a SPI slave device as specified in + spi/spi-controller.yaml + +maintainers: + - Tomi Valkeinen <tomi.valkeinen@ti.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: lgphilips,lb035q02 + + label: true + enable-gpios: true + port: true + +required: + - compatible + - enable-gpios + - port + +unevaluatedProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + panel: panel@0 { + compatible = "lgphilips,lb035q02"; + reg = <0>; + spi-max-frequency = <100000>; + spi-cpol; + spi-cpha; + + label = "lcd"; + + enable-gpios = <&gpio7 7 0>; + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/logicpd,type28.yaml b/Documentation/devicetree/bindings/display/panel/logicpd,type28.yaml new file mode 100644 index 000000000..2834287b8 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/logicpd,type28.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/logicpd,type28.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Logic PD Type 28 4.3" WQVGA TFT LCD panel + +maintainers: + - Adam Ford <aford173@gmail.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: logicpd,type28 + + power-supply: true + enable-gpios: true + backlight: true + port: true + +required: + - compatible + +additionalProperties: false + +examples: + - | + lcd0: display { + compatible = "logicpd,type28"; + enable-gpios = <&gpio5 27 0>; + backlight = <&backlight>; + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/lvds.yaml b/Documentation/devicetree/bindings/display/panel/lvds.yaml new file mode 100644 index 000000000..31164608b --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/lvds.yaml @@ -0,0 +1,117 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/lvds.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LVDS Display Panel + +maintainers: + - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> + - Thierry Reding <thierry.reding@gmail.com> + +description: |+ + LVDS is a physical layer specification defined in ANSI/TIA/EIA-644-A. Multiple + incompatible data link layers have been used over time to transmit image data + to LVDS panels. This bindings supports display panels compatible with the + following specifications. + + [JEIDA] "Digital Interface Standards for Monitor", JEIDA-59-1999, February + 1999 (Version 1.0), Japan Electronic Industry Development Association (JEIDA) + [LDI] "Open LVDS Display Interface", May 1999 (Version 0.95), National + Semiconductor + [VESA] "VESA Notebook Panel Standard", October 2007 (Version 1.0), Video + Electronics Standards Association (VESA) + + Device compatible with those specifications have been marketed under the + FPD-Link and FlatLink brands. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + contains: + const: panel-lvds + description: + Shall contain "panel-lvds" in addition to a mandatory panel-specific + compatible string defined in individual panel bindings. The "panel-lvds" + value shall never be used on its own. + + data-mapping: + enum: + - jeida-18 + - jeida-24 + - vesa-24 + description: | + The color signals mapping order. + + LVDS data mappings are defined as follows. + + - "jeida-18" - 18-bit data mapping compatible with the [JEIDA], [LDI] and + [VESA] specifications. Data are transferred as follows on 3 LVDS lanes. + + Slot 0 1 2 3 4 5 6 + ________________ _________________ + Clock \_______________________/ + ______ ______ ______ ______ ______ ______ ______ + DATA0 ><__G0__><__R5__><__R4__><__R3__><__R2__><__R1__><__R0__>< + DATA1 ><__B1__><__B0__><__G5__><__G4__><__G3__><__G2__><__G1__>< + DATA2 ><_CTL2_><_CTL1_><_CTL0_><__B5__><__B4__><__B3__><__B2__>< + + - "jeida-24" - 24-bit data mapping compatible with the [DSIM] and [LDI] + specifications. Data are transferred as follows on 4 LVDS lanes. + + Slot 0 1 2 3 4 5 6 + ________________ _________________ + Clock \_______________________/ + ______ ______ ______ ______ ______ ______ ______ + DATA0 ><__G2__><__R7__><__R6__><__R5__><__R4__><__R3__><__R2__>< + DATA1 ><__B3__><__B2__><__G7__><__G6__><__G5__><__G4__><__G3__>< + DATA2 ><_CTL2_><_CTL1_><_CTL0_><__B7__><__B6__><__B5__><__B4__>< + DATA3 ><_CTL3_><__B1__><__B0__><__G1__><__G0__><__R1__><__R0__>< + + - "vesa-24" - 24-bit data mapping compatible with the [VESA] specification. + Data are transferred as follows on 4 LVDS lanes. + + Slot 0 1 2 3 4 5 6 + ________________ _________________ + Clock \_______________________/ + ______ ______ ______ ______ ______ ______ ______ + DATA0 ><__G0__><__R5__><__R4__><__R3__><__R2__><__R1__><__R0__>< + DATA1 ><__B1__><__B0__><__G5__><__G4__><__G3__><__G2__><__G1__>< + DATA2 ><_CTL2_><_CTL1_><_CTL0_><__B5__><__B4__><__B3__><__B2__>< + DATA3 ><_CTL3_><__B7__><__B6__><__G7__><__G6__><__R7__><__R6__>< + + Control signals are mapped as follows. + + CTL0: HSync + CTL1: VSync + CTL2: Data Enable + CTL3: 0 + + data-mirror: + type: boolean + description: + If set, reverse the bit order described in the data mappings below on all + data lanes, transmitting bits for slots 6 to 0 instead of 0 to 6. + + port: true + ports: true + +required: + - compatible + - data-mapping + - width-mm + - height-mm + - panel-timing + +oneOf: + - required: + - port + - required: + - ports + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml b/Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml new file mode 100644 index 000000000..51f423297 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/mantix,mlaf057we51-x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mantix MLAF057WE51-X 5.7" 720x1440 TFT LCD panel + +maintainers: + - Guido Günther <agx@sigxcpu.org> + +description: + Mantix MLAF057WE51 X is a 720x1440 TFT LCD panel connected using + a MIPI-DSI video interface. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + enum: + - mantix,mlaf057we51-x + + port: true + reg: + maxItems: 1 + description: DSI virtual channel + + avdd-supply: + description: Positive analog power supply + + avee-supply: + description: Negative analog power supply + + vddi-supply: + description: 1.8V I/O voltage supply + + reset-gpios: true + + 'mantix,tp-rstn-gpios': + description: second reset line that triggers DSI config load + + backlight: true + +required: + - compatible + - reg + - avdd-supply + - avee-supply + - vddi-supply + - reset-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "mantix,mlaf057we51-x"; + reg = <0>; + avdd-supply = <®_avdd>; + avee-supply = <®_avee>; + vddi-supply = <®_1v8_p>; + reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; + mantix,tp-rstn-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; + backlight = <&backlight>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/mitsubishi,aa104xd12.yaml b/Documentation/devicetree/bindings/display/panel/mitsubishi,aa104xd12.yaml new file mode 100644 index 000000000..b5e7ee230 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/mitsubishi,aa104xd12.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/mitsubishi,aa104xd12.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mitsubishi AA104XD12 10.4" XGA LVDS Display Panel + +maintainers: + - Laurent Pinchart <laurent.pinchart@ideasonboard.com> + - Thierry Reding <thierry.reding@gmail.com> + +allOf: + - $ref: lvds.yaml# + +properties: + compatible: + items: + - const: mitsubishi,aa104xd12 + - {} # panel-lvds, but not listed here to avoid false select + + vcc-supply: + description: Reference to the regulator powering the panel VCC pins. + + data-mapping: + const: jeida-24 + + width-mm: + const: 210 + + height-mm: + const: 158 + + panel-timing: true + port: true + +additionalProperties: false + +required: + - compatible + - vcc-supply + +examples: + - |+ + + panel { + compatible = "mitsubishi,aa104xd12", "panel-lvds"; + vcc-supply = <&vcc_3v3>; + + width-mm = <210>; + height-mm = <158>; + + data-mapping = "jeida-24"; + + panel-timing { + /* 1024x768 @65Hz */ + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hsync-len = <136>; + hfront-porch = <20>; + hback-porch = <160>; + vfront-porch = <3>; + vback-porch = <29>; + vsync-len = <6>; + }; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds_encoder>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/mitsubishi,aa121td01.yaml b/Documentation/devicetree/bindings/display/panel/mitsubishi,aa121td01.yaml new file mode 100644 index 000000000..977c50a85 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/mitsubishi,aa121td01.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/mitsubishi,aa121td01.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mitsubishi AA121TD01 12.1" WXGA LVDS Display Panel + +maintainers: + - Laurent Pinchart <laurent.pinchart@ideasonboard.com> + - Thierry Reding <thierry.reding@gmail.com> + +allOf: + - $ref: lvds.yaml# + +properties: + compatible: + items: + - const: mitsubishi,aa121td01 + - {} # panel-lvds, but not listed here to avoid false select + + vcc-supply: + description: Reference to the regulator powering the panel VCC pins. + + data-mapping: + const: jeida-24 + + width-mm: + const: 261 + + height-mm: + const: 163 + + panel-timing: true + port: true + +additionalProperties: false + +required: + - compatible + - vcc-supply + +examples: + - |+ + panel { + compatible = "mitsubishi,aa121td01", "panel-lvds"; + vcc-supply = <&vcc_3v3>; + + width-mm = <261>; + height-mm = <163>; + + data-mapping = "jeida-24"; + + panel-timing { + /* 1280x800 @60Hz */ + clock-frequency = <71000000>; + hactive = <1280>; + vactive = <800>; + hsync-len = <70>; + hfront-porch = <20>; + hback-porch = <70>; + vsync-len = <5>; + vfront-porch = <3>; + vback-porch = <15>; + }; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds_encoder>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/nec,nl8048hl11.yaml b/Documentation/devicetree/bindings/display/panel/nec,nl8048hl11.yaml new file mode 100644 index 000000000..aa788eaa2 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/nec,nl8048hl11.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/nec,nl8048hl11.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NEC NL8048HL11 4.1" WVGA TFT LCD panel + +description: + The NEC NL8048HL11 is a 4.1" WVGA TFT LCD panel with a 24-bit RGB parallel + data interface and an SPI control interface. + +maintainers: + - Laurent Pinchart <laurent.pinchart@ideasonboard.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: nec,nl8048hl11 + + label: true + port: true + reg: true + reset-gpios: true + + spi-max-frequency: + maximum: 10000000 + +required: + - compatible + - reg + - reset-gpios + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + lcd_panel: panel@0 { + compatible = "nec,nl8048hl11"; + reg = <0>; + spi-max-frequency = <10000000>; + + reset-gpios = <&gpio7 7 GPIO_ACTIVE_LOW>; + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml new file mode 100644 index 000000000..bc92928c8 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/novatek,nt35510.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Novatek NT35510-based display panels + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - const: hydis,hva40wv1 + - const: novatek,nt35510 + description: This indicates the panel manufacturer of the panel + that is in turn using the NT35510 panel driver. The compatible + string determines how the NT35510 panel driver shall be configured + to work with the indicated panel. The novatek,nt35510 compatible shall + always be provided as a fallback. + reg: true + reset-gpios: true + vdd-supply: + description: regulator that supplies the vdd voltage + vddi-supply: + description: regulator that supplies the vddi voltage + backlight: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "hydis,hva40wv1", "novatek,nt35510"; + reg = <0>; + vdd-supply = <&ab8500_ldo_aux4_reg>; + vddi-supply = <&ab8500_ldo_aux6_reg>; + reset-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; + backlight = <&gpio_bl>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.yaml b/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.yaml new file mode 100644 index 000000000..2329d9610 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/olimex,lcd-olinuxino.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Binding for Olimex Ltd. LCD-OLinuXino bridge panel. + +maintainers: + - Stefan Mavrodiev <stefan@olimex.com> + +description: | + This device can be used as bridge between a host controller and LCD panels. + Currently supported LCDs are: + - LCD-OLinuXino-4.3TS + - LCD-OLinuXino-5 + - LCD-OLinuXino-7 + - LCD-OLinuXino-10 + + The panel itself contains: + - AT24C16C EEPROM holding panel identification and timing requirements + - AR1021 resistive touch screen controller (optional) + - FT5x6 capacitive touch screnn controller (optional) + - GT911/GT928 capacitive touch screen controller (optional) + + The above chips share same I2C bus. The EEPROM is factory preprogrammed with + device information (id, serial, etc.) and timing requirements. + + Touchscreen bingings can be found in these files: + - input/touchscreen/goodix.yaml + - input/touchscreen/edt-ft5x06.txt + - input/touchscreen/ar1021.txt + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: olimex,lcd-olinuxino + + backlight: true + enable-gpios: true + power-supply: true + reg: true + +required: + - compatible + - reg + - power-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + panel@50 { + compatible = "olimex,lcd-olinuxino"; + reg = <0x50>; + power-supply = <®_vcc5v0>; + enable-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>; + backlight = <&backlight>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.yaml b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.yaml new file mode 100644 index 000000000..4b6dda6db --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/orisetech,otm8009a.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Orise Tech OTM8009A 3.97" 480x800 TFT LCD panel (MIPI-DSI video mode) + +maintainers: + - Philippe CORNU <philippe.cornu@st.com> + +description: | + The Orise Tech OTM8009A is a 3.97" 480x800 TFT LCD panel connected using + a MIPI-DSI video interface. Its backlight is managed through the DSI link. +allOf: + - $ref: panel-common.yaml# + +properties: + + compatible: + const: orisetech,otm8009a + + reg: + maxItems: 1 + description: DSI virtual channel + + enable-gpios: true + port: true + power-supply: true + + reset-gpios: + maxItems: 1 + +additionalProperties: false + +required: + - compatible + - reg + +examples: + - | + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "orisetech,otm8009a"; + reg = <0>; + reset-gpios = <&gpiof 15 0>; + power-supply = <&v1v8>; + }; + }; +... + diff --git a/Documentation/devicetree/bindings/display/panel/panel-common.yaml b/Documentation/devicetree/bindings/display/panel/panel-common.yaml new file mode 100644 index 000000000..cd6dc5461 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/panel-common.yaml @@ -0,0 +1,168 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/panel-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common Properties for Display Panels + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> + +description: | + This document defines device tree properties common to several classes of + display panels. It doesn't constitue a device tree binding specification by + itself but is meant to be referenced by device tree bindings. + + When referenced from panel device tree bindings the properties defined in this + document are defined as follows. The panel device tree bindings are + responsible for defining whether each property is required or optional. + +properties: + # Descriptive Properties + width-mm: + description: + Specifies the width of the physical area where images are displayed. This + property is expressed in millimeters and rounded to the closest unit. + + height-mm: + description: + Specifies the height of the physical area where images are displayed. This + property is expressed in millimeters and rounded to the closest unit. + + label: + description: | + The label property specifies a symbolic name for the panel as a + string suitable for use by humans. It typically contains a name inscribed + on the system (e.g. as an affixed label) or specified in the system's + documentation (e.g. in the user's manual). + + If no such name exists, and unless the property is mandatory according to + device tree bindings, it shall rather be omitted than constructed of + non-descriptive information. For instance an LCD panel in a system that + contains a single panel shall not be labelled "LCD" if that name is not + inscribed on the system or used in a descriptive fashion in system + documentation. + + rotation: + description: + Display rotation in degrees counter clockwise (0,90,180,270) + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 90, 180, 270] + + # Display Timings + panel-timing: + description: + Most display panels are restricted to a single resolution and + require specific display timings. The panel-timing subnode expresses those + timings. + $ref: panel-timing.yaml# + + display-timings: + description: + Some display panels support several resolutions with different timings. + The display-timings bindings supports specifying several timings and + optionally specifying which is the native mode. + $ref: display-timings.yaml# + + # Connectivity + port: + type: object + + ports: + type: object + description: + Panels receive video data through one or multiple connections. While + the nature of those connections is specific to the panel type, the + connectivity is expressed in a standard fashion using ports as specified + in the device graph bindings defined in + Documentation/devicetree/bindings/graph.txt. + + ddc-i2c-bus: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Some panels expose EDID information through an I2C-compatible + bus such as DDC2 or E-DDC. For such panels the ddc-i2c-bus contains a + phandle to the system I2C controller connected to that bus. + + no-hpd: + type: boolean + description: + This panel is supposed to communicate that it's ready via HPD + (hot plug detect) signal, but the signal isn't hooked up so we should + hardcode the max delay from the panel spec when powering up the panel. + + hpd-gpios: + maxItems: 1 + description: + If Hot Plug Detect (HPD) is connected to a GPIO in the system rather + than a dedicated HPD pin the pin can be specified here. + + # Control I/Os + + # Many display panels can be controlled through pins driven by GPIOs. The nature + # and timing of those control signals are device-specific and left for panel + # device tree bindings to specify. The following GPIO specifiers can however be + # used for panels that implement compatible control signals. + + enable-gpios: + maxItems: 1 + description: | + Specifier for a GPIO connected to the panel enable control signal. The + enable signal is active high and enables operation of the panel. This + property can also be used for panels implementing an active low power down + signal, which is a negated version of the enable signal. Active low enable + signals (or active high power down signals) can be supported by inverting + the GPIO specifier polarity flag. + + Note that the enable signal control panel operation only and must not be + confused with a backlight enable signal. + + reset-gpios: + maxItems: 1 + description: + Specifier for a GPIO connected to the panel reset control signal. + The reset signal is active low and resets the panel internal logic + while active. Active high reset signals can be supported by inverting the + GPIO specifier polarity flag. + + te-gpios: + maxItems: 1 + description: + GPIO spec for the tearing effect synchronization signal. + The tearing effect signal is active high. Active low signals can be + supported by inverting the GPIO specifier polarity flag. + + # Power + power-supply: + description: + Display panels require power to be supplied. While several panels need + more than one power supply with panel-specific constraints governing the + order and timings of the power supplies, in many cases a single power + supply is sufficient, either because the panel has a single power rail, or + because all its power rails can be driven by the same supply. In that case + the power-supply property specifies the supply powering the panel as a + phandle to a regulator. + + # Backlight + + # Most display panels include a backlight. Some of them also include a backlight + # controller exposed through a control bus such as I2C or DSI. Others expose + # backlight control through GPIO, PWM or other signals connected to an external + # backlight controller. + + backlight: + $ref: /schemas/types.yaml#/definitions/phandle + description: + For panels whose backlight is controlled by an external backlight + controller, this property contains a phandle that references the + controller. + +dependencies: + width-mm: [ height-mm ] + height-mm: [ width-mm ] + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/display/panel/panel-dpi.yaml b/Documentation/devicetree/bindings/display/panel/panel-dpi.yaml new file mode 100644 index 000000000..0cd74c8da --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/panel-dpi.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/panel-dpi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic MIPI DPI Panel + +maintainers: + - Sam Ravnborg <sam@ravnborg.org> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + description: + Shall contain a panel specific compatible and "panel-dpi" + in that order. + items: + - {} + - const: panel-dpi + + backlight: true + enable-gpios: true + height-mm: true + label: true + panel-timing: true + port: true + power-supply: true + reset-gpios: true + width-mm: true + +required: + - panel-timing + - power-supply + +additionalProperties: false + +examples: + - | + panel { + compatible = "osddisplays,osd057T0559-34ts", "panel-dpi"; + label = "osddisplay"; + power-supply = <&vcc_supply>; + backlight = <&backlight>; + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + panel-timing { + clock-frequency = <9200000>; + hactive = <800>; + vactive = <480>; + hfront-porch = <8>; + hback-porch = <4>; + hsync-len = <41>; + vback-porch = <2>; + vfront-porch = <4>; + vsync-len = <10>; + + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.yaml b/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.yaml new file mode 100644 index 000000000..4a36aa64c --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/panel-dsi-cm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: DSI command mode panels + +maintainers: + - Tomi Valkeinen <tomi.valkeinen@ti.com> + - Sebastian Reichel <sre@kernel.org> + +description: | + This binding file is a collection of the DSI panels that + are usually driven in command mode. If no backlight is + referenced via the optional backlight property, the DSI + panel is assumed to have native backlight support. + The panel may use an OF graph binding for the association + to the display, or it may be a direct child node of the + display. + +allOf: + - $ref: panel-common.yaml# + +properties: + + compatible: + items: + - enum: + - motorola,droid4-panel # Panel from Motorola Droid4 phone + - nokia,himalaya # Panel from Nokia N950 phone + - tpo,taal # Panel from OMAP4 SDP board + - const: panel-dsi-cm # Generic DSI command mode panel compatible fallback + + reg: + maxItems: 1 + description: DSI virtual channel + + vddi-supply: + description: + Display panels require power to be supplied. While several panels need + more than one power supply with panel-specific constraints governing the + order and timings of the power supplies, in many cases a single power + supply is sufficient, either because the panel has a single power rail, or + because all its power rails can be driven by the same supply. In that case + the vddi-supply property specifies the supply powering the panel as a + phandle to a regulator. + + vpnl-supply: + description: + When the display panel needs a second power supply, this property can be + used in addition to vddi-supply. Both supplies will be enabled at the + same time before the panel is being accessed. + + width-mm: true + height-mm: true + label: true + rotation: true + panel-timing: true + port: true + reset-gpios: true + te-gpios: true + backlight: true + +additionalProperties: false + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi-controller { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "tpo,taal", "panel-dsi-cm"; + reg = <0>; + reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml new file mode 100644 index 000000000..c0dd9fa29 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/panel-simple-dsi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Simple DSI panels with a single power-supply + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Sam Ravnborg <sam@ravnborg.org> + +description: | + This binding file is a collection of the DSI panels that + requires only a single power-supply. + There are optionally a backlight and an enable GPIO. + The panel may use an OF graph binding for the association to the display, + or it may be a direct child node of the display. + + If the panel is more advanced a dedicated binding file is required. + +allOf: + - $ref: panel-common.yaml# + +properties: + + compatible: + enum: + # compatible must be listed in alphabetical order, ordered by compatible. + # The description in the comment is mandatory for each compatible. + + # AU Optronics Corporation 8.0" WUXGA TFT LCD panel + - auo,b080uan01 + # Boe Corporation 8.0" WUXGA TFT LCD panel + - boe,tv080wum-nl0 + # Innolux P079ZCA 7.85" 768x1024 TFT LCD panel + - innolux,p079zca + # Kingdisplay KD097D04 9.7" 1536x2048 TFT LCD panel + - kingdisplay,kd097d04 + # LG ACX467AKM-7 4.95" 1080×1920 LCD Panel + - lg,acx467akm-7 + # LG Corporation 7" WXGA TFT LCD panel + - lg,ld070wx3-sl01 + # One Stop Displays OSD101T2587-53TS 10.1" 1920x1200 panel + - osddisplays,osd101t2587-53ts + # Panasonic 10" WUXGA TFT LCD panel + - panasonic,vvx10f004b00 + # Panasonic 10" WUXGA TFT LCD panel + - panasonic,vvx10f034n00 + + reg: + maxItems: 1 + description: DSI virtual channel + + backlight: true + enable-gpios: true + port: true + power-supply: true + +additionalProperties: false + +required: + - compatible + - power-supply + - reg + +examples: + - | + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "panasonic,vvx10f034n00"; + reg = <0>; + power-supply = <&vcc_lcd_reg>; + + port { + panel: endpoint { + remote-endpoint = <<dc_out>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml new file mode 100644 index 000000000..edb53ab0d --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml @@ -0,0 +1,308 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/panel-simple.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Simple panels with one power supply + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Sam Ravnborg <sam@ravnborg.org> + +description: | + This binding file is a collection of the simple (dumb) panels that + requires only a single power-supply. + There are optionally a backlight and an enable GPIO. + The panel may use an OF graph binding for the association to the display, + or it may be a direct child node of the display. + + If the panel is more advanced a dedicated binding file is required. + +allOf: + - $ref: panel-common.yaml# + +properties: + + compatible: + enum: + # compatible must be listed in alphabetical order, ordered by compatible. + # The description in the comment is mandatory for each compatible. + + # Ampire AM-1280800N3TZQW-T00H 10.1" WQVGA TFT LCD panel + - ampire,am-1280800n3tzqw-t00h + # Ampire AM-480272H3TMQW-T01H 4.3" WQVGA TFT LCD panel + - ampire,am-480272h3tmqw-t01h + # Ampire AM-800480R3TMQW-A1H 7.0" WVGA TFT LCD panel + - ampire,am800480r3tmqwa1h + # AU Optronics Corporation 10.1" WSVGA TFT LCD panel + - auo,b101aw03 + # AU Optronics Corporation 10.1" WSVGA TFT LCD panel + - auo,b101ean01 + # AU Optronics Corporation 10.1" WXGA TFT LCD panel + - auo,b101xtn01 + # AUO B116XAK01 eDP TFT LCD panel + - auo,b116xa01 + # AU Optronics Corporation 11.6" HD (1366x768) color TFT-LCD panel + - auo,b116xw03 + # AU Optronics Corporation 13.3" FHD (1920x1080) color TFT-LCD panel + - auo,b133htn01 + # AU Optronics Corporation 13.3" WXGA (1366x768) TFT LCD panel + - auo,b133xtn01 + # AU Optronics Corporation 7.0" FHD (800 x 480) TFT LCD panel + - auo,g070vvn01 + # AU Optronics Corporation 10.1" (1280x800) color TFT LCD panel + - auo,g101evn010 + # AU Optronics Corporation 10.4" (800x600) color TFT LCD panel + - auo,g104sn02 + # AU Optronics Corporation 12.1" (1280x800) TFT LCD panel + - auo,g121ean01 + # AU Optronics Corporation 13.3" FHD (1920x1080) TFT LCD panel + - auo,g133han01 + # AU Optronics Corporation 15.6" (1366x768) TFT LCD panel + - auo,g156xtn01 + # AU Optronics Corporation 18.5" FHD (1920x1080) TFT LCD panel + - auo,g185han01 + # AU Optronics Corporation 19.0" (1280x1024) TFT LCD panel + - auo,g190ean01 + # AU Optronics Corporation 31.5" FHD (1920x1080) TFT LCD panel + - auo,p320hvn03 + # AU Optronics Corporation 21.5" FHD (1920x1080) color TFT LCD panel + - auo,t215hvn01 + # Shanghai AVIC Optoelectronics 7" 1024x600 color TFT-LCD panel + - avic,tm070ddh03 + # BOE HV070WSA-100 7.01" WSVGA TFT LCD panel + - boe,hv070wsa-100 + # BOE OPTOELECTRONICS TECHNOLOGY 10.1" WXGA TFT LCD panel + - boe,nv101wxmn51 + # BOE NV133FHM-N61 13.3" FHD (1920x1080) TFT LCD Panel + - boe,nv133fhm-n61 + # BOE NV133FHM-N62 13.3" FHD (1920x1080) TFT LCD Panel + - boe,nv133fhm-n62 + # BOE NV140FHM-N49 14.0" FHD a-Si FT panel + - boe,nv140fhmn49 + # CDTech(H.K.) Electronics Limited 4.3" 480x272 color TFT-LCD panel + - cdtech,s043wq26h-ct7 + # CDTech(H.K.) Electronics Limited 7" WSVGA (1024x600) TFT LCD Panel + - cdtech,s070pws19hp-fc21 + # CDTech(H.K.) Electronics Limited 7" WVGA (800x480) TFT LCD Panel + - cdtech,s070swv29hg-dc44 + # CDTech(H.K.) Electronics Limited 7" 800x480 color TFT-LCD panel + - cdtech,s070wv95-ct16 + # Chefree CH101OLHLWH-002 10.1" (1280x800) color TFT LCD panel + - chefree,ch101olhlwh-002 + # Chunghwa Picture Tubes Ltd. 7" WXGA TFT LCD panel + - chunghwa,claa070wp03xg + # Chunghwa Picture Tubes Ltd. 10.1" WXGA TFT LCD panel + - chunghwa,claa101wa01a + # Chunghwa Picture Tubes Ltd. 10.1" WXGA TFT LCD panel + - chunghwa,claa101wb01 + # Chunghwa Picture Tubes Ltd. 10.1" WXGA TFT LCD panel + - chunghwa,claa101wb03 + # DataImage, Inc. 7" WVGA (800x480) TFT LCD panel with 24-bit parallel interface. + - dataimage,scf0700c48ggu18 + # DLC Display Co. DLC1010GIG 10.1" WXGA TFT LCD Panel + - dlc,dlc1010gig + # Emerging Display Technology Corp. 3.5" QVGA TFT LCD panel + - edt,et035012dm6 + # Emerging Display Technology Corp. 480x272 TFT Display with capacitive touch + - edt,etm043080dh6gp + # Emerging Display Technology Corp. 480x272 TFT Display + - edt,etm0430g0dh6 + # Emerging Display Technology Corp. 5.7" VGA TFT LCD panel + - edt,et057090dhu + # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch + - edt,etm070080dh6 + # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch + - edt,etm0700g0dh6 + # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch + # Same as ETM0700G0DH6 but with inverted pixel clock. + - edt,etm070080bdh6 + # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch + # Same display as the ETM0700G0BDH6, but with changed hardware for the + # backlight and the touch interface. + - edt,etm070080edh6 + # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch + # Same timings as the ETM0700G0DH6, but with resistive touch. + - edt,etm070080dh6 + # Evervision Electronics Co. Ltd. VGG804821 5.0" WVGA TFT LCD Panel + - evervision,vgg804821 + # Foxlink Group 5" WVGA TFT LCD panel + - foxlink,fl500wvr00-a0t + # Frida FRD350H54004 3.5" QVGA TFT LCD panel + - frida,frd350h54004 + # FriendlyELEC HD702E 800x1280 LCD panel + - friendlyarm,hd702e + # GiantPlus GPG48273QS5 4.3" (480x272) WQVGA TFT LCD panel + - giantplus,gpg48273qs5 + # GiantPlus GPM940B0 3.0" QVGA TFT LCD panel + - giantplus,gpm940b0 + # HannStar Display Corp. HSD070PWW1 7.0" WXGA TFT LCD panel + - hannstar,hsd070pww1 + # HannStar Display Corp. HSD100PXN1 10.1" XGA LVDS panel + - hannstar,hsd100pxn1 + # Hitachi Ltd. Corporation 9" WVGA (800x480) TFT LCD panel + - hit,tx23d38vm0caa + # InfoVision Optoelectronics M133NWF4 R0 13.3" FHD (1920x1080) TFT LCD panel + - ivo,m133nwf4-r0 + # Innolux AT043TN24 4.3" WQVGA TFT LCD panel + - innolux,at043tn24 + # Innolux AT070TN92 7.0" WQVGA TFT LCD panel + - innolux,at070tn92 + # Innolux G070Y2-L01 7" WVGA (800x480) TFT LCD panel + - innolux,g070y2-l01 + # Innolux Corporation 10.1" G101ICE-L01 WXGA (1280x800) LVDS panel + - innolux,g101ice-l01 + # Innolux Corporation 12.1" WXGA (1280x800) TFT LCD panel + - innolux,g121i1-l01 + # Innolux Corporation 12.1" G121X1-L03 XGA (1024x768) TFT LCD panel + - innolux,g121x1-l03 + # Innolux Corporation 11.6" WXGA (1366x768) TFT LCD panel + - innolux,n116bge + # InnoLux 15.6" WXGA TFT LCD panel + - innolux,n156bge-l21 + # Innolux Corporation 7.0" WSVGA (1024x600) TFT LCD panel + - innolux,zj070na-01p + # King & Display KD116N21-30NV-A010 eDP TFT LCD panel + - kingdisplay,kd116n21-30nv-a010 + # Kaohsiung Opto-Electronics Inc. 5.7" QVGA (320 x 240) TFT LCD panel + - koe,tx14d24vm1bpa + # Kaohsiung Opto-Electronics Inc. 10.1" WUXGA (1920 x 1200) LVDS TFT LCD panel + - koe,tx26d202vm0bwa + # Kaohsiung Opto-Electronics. TX31D200VM0BAA 12.3" HSXGA LVDS panel + - koe,tx31d200vm0baa + # Kyocera Corporation 12.1" XGA (1024x768) TFT LCD panel + - kyo,tcg121xglp + # LeMaker BL035-RGB-002 3.5" QVGA TFT LCD panel + - lemaker,bl035-rgb-002 + # LG 7" (800x480 pixels) TFT LCD panel + - lg,lb070wv8 + # LG Corporation 5" HD TFT LCD panel + - lg,lh500wx1-sd03 + # LG LP079QX1-SP0V 7.9" (1536x2048 pixels) TFT LCD panel + - lg,lp079qx1-sp0v + # LG 9.7" (2048x1536 pixels) TFT LCD panel + - lg,lp097qx1-spa1 + # LG 12.0" (1920x1280 pixels) TFT LCD panel + - lg,lp120up1 + # LG 12.9" (2560x1700 pixels) TFT LCD panel + - lg,lp129qe + # Logic Technologies LT161010-2NHC 7" WVGA TFT Cap Touch Module + - logictechno,lt161010-2nhc + # Logic Technologies LT161010-2NHR 7" WVGA TFT Resistive Touch Module + - logictechno,lt161010-2nhr + # Logic Technologies LT170410-2WHC 10.1" 1280x800 IPS TFT Cap Touch Mod. + - logictechno,lt170410-2whc + # Mitsubishi "AA070MC01 7.0" WVGA TFT LCD panel + - mitsubishi,aa070mc01-ca1 + # NEC LCD Technologies, Ltd. 12.1" WXGA (1280x800) LVDS TFT LCD panel + - nec,nl12880bc20-05 + # NEC LCD Technologies,Ltd. WQVGA TFT LCD panel + - nec,nl4827hc19-05b + # Netron-DY E231732 7.0" WSVGA TFT LCD panel + - netron-dy,e231732 + # NewEast Optoelectronics CO., LTD WJFH116008A eDP TFT LCD panel + - neweast,wjfh116008a + # Newhaven Display International 480 x 272 TFT LCD panel + - newhaven,nhd-4.3-480272ef-atxl + # NLT Technologies, Ltd. 15.6" FHD (1920x1080) LVDS TFT LCD panel + - nlt,nl192108ac18-02d + # New Vision Display 7.0" 800 RGB x 480 TFT LCD panel + - nvd,9128 + # OKAYA Electric America, Inc. RS800480T-7X0GP 7" WVGA LCD panel + - okaya,rs800480t-7x0gp + # Olimex 4.3" TFT LCD panel + - olimex,lcd-olinuxino-43-ts + # On Tat Industrial Company 7" DPI TFT panel. + - ontat,yx700wv03 + # OrtusTech COM37H3M05DTC Blanview 3.7" VGA portrait TFT-LCD panel + - ortustech,com37h3m05dtc + # OrtusTech COM37H3M99DTC Blanview 3.7" VGA portrait TFT-LCD panel + - ortustech,com37h3m99dtc + # OrtusTech COM43H4M85ULC Blanview 3.7" TFT-LCD panel + - ortustech,com43h4m85ulc + # OSD Displays OSD070T1718-19TS 7" WVGA TFT LCD panel + - osddisplays,osd070t1718-19ts + # One Stop Displays OSD101T2045-53TS 10.1" 1920x1200 panel + - osddisplays,osd101t2045-53ts + # POWERTIP PH800480T013-IDF2 7.0" WVGA TFT LCD panel + - powertip,ph800480t013-idf02 + # QiaoDian XianShi Corporation 4"3 TFT LCD panel + - qiaodian,qd43003c0-40 + # Rocktech Displays Ltd. RK101II01D-CT 10.1" TFT 1280x800 + - rocktech,rk101ii01d-ct + # Rocktech Display Ltd. RK070ER9427 800(RGB)x480 TFT LCD panel + - rocktech,rk070er9427 + # Samsung 12.2" (2560x1600 pixels) TFT LCD panel + - samsung,lsn122dl01-c01 + # Samsung Electronics 10.1" WSVGA TFT LCD panel + - samsung,ltn101nt05 + # Samsung Electronics 14" WXGA (1366x768) TFT LCD panel + - samsung,ltn140at29-301 + # Satoz SAT050AT40H12R2 5.0" WVGA TFT LCD panel + - satoz,sat050at40h12r2 + # Sharp LQ035Q7DB03 3.5" QVGA TFT LCD panel + - sharp,lq035q7db03 + # Sharp LQ070Y3DG3B 7.0" WVGA landscape TFT LCD panel + - sharp,lq070y3dg3b + # Sharp Display Corp. LQ101K1LY04 10.07" WXGA TFT LCD panel + - sharp,lq101k1ly04 + # Sharp 12.3" (2400x1600 pixels) TFT LCD panel + - sharp,lq123p1jx31 + # Sharp LS020B1DD01D 2.0" HQVGA TFT LCD panel + - sharp,ls020b1dd01d + # Shelly SCA07010-BFN-LNN 7.0" WVGA TFT LCD panel + - shelly,sca07010-bfn-lnn + # Starry KR070PE2T 7" WVGA TFT LCD panel + - starry,kr070pe2t + # Starry 12.2" (1920x1200 pixels) TFT LCD panel + - starry,kr122ea0sra + # Tianma Micro-electronics TM070JDHG30 7.0" WXGA TFT LCD panel + - tianma,tm070jdhg30 + # Tianma Micro-electronics TM070JVHG33 7.0" WXGA TFT LCD panel + - tianma,tm070jvhg33 + # Tianma Micro-electronics TM070RVHG71 7.0" WXGA TFT LCD panel + - tianma,tm070rvhg71 + # Toshiba 8.9" WXGA (1280x768) TFT LCD panel + - toshiba,lt089ac29000 + # TPK U.S.A. LLC Fusion 7" 800 x 480 (WVGA) LCD panel with capacitive touch + - tpk,f07a-0102 + # TPK U.S.A. LLC Fusion 10.1" 1024 x 600 (WSVGA) LCD panel with capacitive touch + - tpk,f10a-0102 + # United Radiant Technology UMSH-8596MD-xT 7.0" WVGA TFT LCD panel + # Supported are LVDS versions (-11T, -19T) and parallel ones + # (-T, -1T, -7T, -20T). + - urt,umsh-8596md-t + - urt,umsh-8596md-1t + - urt,umsh-8596md-7t + - urt,umsh-8596md-11t + - urt,umsh-8596md-19t + - urt,umsh-8596md-20t + # VXT 800x480 color TFT LCD panel + - vxt,vl050-8048nt-c01 + # Winstar Display Corporation 3.5" QVGA (320x240) TFT LCD panel + - winstar,wf35ltiacd + + backlight: true + enable-gpios: true + port: true + power-supply: true + +additionalProperties: false + +required: + - compatible + - power-supply + +examples: + - | + panel_rgb: panel-rgb { + compatible = "ampire,am-480272h3tmqw-t01h"; + power-supply = <&vcc_lcd_reg>; + + port { + panel_in_rgb: endpoint { + remote-endpoint = <<dc_out_rgb>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/panel/panel-timing.yaml b/Documentation/devicetree/bindings/display/panel/panel-timing.yaml new file mode 100644 index 000000000..9bf592dc3 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/panel-timing.yaml @@ -0,0 +1,215 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/panel-timing.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: panel timing bindings + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Sam Ravnborg <sam@ravnborg.org> + +description: | + There are different ways of describing the timing data of a panel. The + devicetree representation corresponds to the one commonly found in datasheets + for panels. + + The parameters are defined as seen in the following illustration. + + +----------+-------------------------------------+----------+-------+ + | | ^ | | | + | | |vback_porch | | | + | | v | | | + +----------#######################################----------+-------+ + | # ^ # | | + | # | # | | + | hback # | # hfront | hsync | + | porch # | hactive # porch | len | + |<-------->#<-------+--------------------------->#<-------->|<----->| + | # | # | | + | # |vactive # | | + | # | # | | + | # v # | | + +----------#######################################----------+-------+ + | | ^ | | | + | | |vfront_porch | | | + | | v | | | + +----------+-------------------------------------+----------+-------+ + | | ^ | | | + | | |vsync_len | | | + | | v | | | + +----------+-------------------------------------+----------+-------+ + + + The following is the panel timings shown with time on the x-axis. + This matches the timing diagrams often found in data sheets. + + Active Front Sync Back + Region Porch Porch + <-----------------------><----------------><-------------><--------------> + //////////////////////| + ////////////////////// | + ////////////////////// |.................. ................ + _______________ + + Timing can be specified either as a typical value or as a tuple + of min, typ, max values. + +properties: + + clock-frequency: + description: Panel clock in Hz + + hactive: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Horizontal panel resolution in pixels + + vactive: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Vertical panel resolution in pixels + + hfront-porch: + description: Horizontal front porch panel timing + oneOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + maxItems: 1 + items: + description: typical number of pixels + - $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 3 + maxItems: 3 + items: + description: min, typ, max number of pixels + + hback-porch: + description: Horizontal back porch timing + oneOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + maxItems: 1 + items: + description: typical number of pixels + - $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 3 + maxItems: 3 + items: + description: min, typ, max number of pixels + + hsync-len: + description: Horizontal sync length panel timing + oneOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + maxItems: 1 + items: + description: typical number of pixels + - $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 3 + maxItems: 3 + items: + description: min, typ, max number of pixels + + vfront-porch: + description: Vertical front porch panel timing + oneOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + maxItems: 1 + items: + description: typical number of lines + - $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 3 + maxItems: 3 + items: + description: min, typ, max number of lines + + vback-porch: + description: Vertical back porch panel timing + oneOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + maxItems: 1 + items: + description: typical number of lines + - $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 3 + maxItems: 3 + items: + description: min, typ, max number of lines + + vsync-len: + description: Vertical sync length panel timing + oneOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + maxItems: 1 + items: + description: typical number of lines + - $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 3 + maxItems: 3 + items: + description: min, typ, max number of lines + + hsync-active: + description: | + Horizontal sync pulse. + 0 selects active low, 1 selects active high. + If omitted then it is not used by the hardware + enum: [0, 1] + + vsync-active: + description: | + Vertical sync pulse. + 0 selects active low, 1 selects active high. + If omitted then it is not used by the hardware + enum: [0, 1] + + de-active: + description: | + Data enable. + 0 selects active low, 1 selects active high. + If omitted then it is not used by the hardware + enum: [0, 1] + + pixelclk-active: + description: | + Data driving on rising or falling edge. + Use 0 to drive pixel data on falling edge and + sample data on rising edge. + Use 1 to drive pixel data on rising edge and + sample data on falling edge + enum: [0, 1] + + syncclk-active: + description: | + Drive sync on rising or sample sync on falling edge. + If not specified then the setup is as specified by pixelclk-active. + Use 0 to drive sync on falling edge and + sample sync on rising edge of pixel clock. + Use 1 to drive sync on rising edge and + sample sync on falling edge of pixel clock + enum: [0, 1] + + interlaced: + type: boolean + description: Enable interlaced mode + + doublescan: + type: boolean + description: Enable double scan mode + + doubleclk: + type: boolean + description: Enable double clock mode + +required: + - clock-frequency + - hactive + - vactive + - hfront-porch + - hback-porch + - hsync-len + - vfront-porch + - vback-porch + - vsync-len + +additionalProperties: false + +... diff --git a/Documentation/devicetree/bindings/display/panel/pda,91-00156-a0.yaml b/Documentation/devicetree/bindings/display/panel/pda,91-00156-a0.yaml new file mode 100644 index 000000000..ccd3623b4 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/pda,91-00156-a0.yaml @@ -0,0 +1,31 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/pda,91-00156-a0.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: PDA 91-00156-A0 5.0" WVGA TFT LCD panel + +maintainers: + - Cristian Birsan <cristian.birsan@microchip.com> + - Thierry Reding <thierry.reding@gmail.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: pda,91-00156-a0 + + power-supply: true + backlight: true + port: true + +additionalProperties: false + +required: + - compatible + - power-supply + - backlight + +... diff --git a/Documentation/devicetree/bindings/display/panel/raspberrypi,7inch-touchscreen.yaml b/Documentation/devicetree/bindings/display/panel/raspberrypi,7inch-touchscreen.yaml new file mode 100644 index 000000000..22a083f7b --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/raspberrypi,7inch-touchscreen.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/raspberrypi,7inch-touchscreen.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: The official 7" (800x480) Raspberry Pi touchscreen + +maintainers: + - Eric Anholt <eric@anholt.net> + - Thierry Reding <thierry.reding@gmail.com> + +description: |+ + This DSI panel contains: + + - TC358762 DSI->DPI bridge + - Atmel microcontroller on I2C for power sequencing the DSI bridge and + controlling backlight + - Touchscreen controller on I2C for touch input + + and this binding covers the DSI display parts but not its touch input. + +properties: + compatible: + const: raspberrypi,7inch-touchscreen-panel + + reg: + const: 0x45 + + port: true + +required: + - compatible + - reg + - port + +additionalProperties: false + +examples: + - |+ + dsi1: dsi { + #address-cells = <1>; + #size-cells = <0>; + + port { + dsi_out_port: endpoint { + remote-endpoint = <&panel_dsi_port>; + }; + }; + }; + + i2c_dsi: i2c { + compatible = "i2c-gpio"; + #address-cells = <1>; + #size-cells = <0>; + scl-gpios = <&gpio 28 0>; + sda-gpios = <&gpio 29 0>; + + lcd@45 { + compatible = "raspberrypi,7inch-touchscreen-panel"; + reg = <0x45>; + + port { + panel_dsi_port: endpoint { + remote-endpoint = <&dsi_out_port>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml new file mode 100644 index 000000000..745dd247c --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/raydium,rm67191.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Raydium RM67171 OLED LCD panel with MIPI-DSI protocol + +maintainers: + - Robert Chiras <robert.chiras@nxp.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: raydium,rm67191 + + reg: true + port: true + reset-gpios: true + width-mm: true + height-mm: true + + dsi-lanes: + description: Number of DSI lanes to be used must be <3> or <4> + enum: [3, 4] + + v3p3-supply: + description: phandle to 3.3V regulator that powers the VDD_3V3 pin + + v1p8-supply: + description: phandle to 1.8V regulator that powers the VDD_1V8 pin + + video-mode: + description: | + 0 - burst-mode + 1 - non-burst with sync event + 2 - non-burst with sync pulse + enum: [0, 1, 2] + +required: + - compatible + - reg + - dsi-lanes + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "raydium,rm67191"; + reg = <0>; + reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; + dsi-lanes = <4>; + width-mm = <68>; + height-mm = <121>; + video-mode = <1>; + + port { + panel_in: endpoint { + remote-endpoint = <&mipi_out>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/raydium,rm68200.yaml b/Documentation/devicetree/bindings/display/panel/raydium,rm68200.yaml new file mode 100644 index 000000000..39477793d --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/raydium,rm68200.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/raydium,rm68200.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Raydium Semiconductor Corporation RM68200 5.5" 720p MIPI-DSI TFT LCD panel + +maintainers: + - Philippe CORNU <philippe.cornu@st.com> + +description: | + The Raydium Semiconductor Corporation RM68200 is a 5.5" 720x1280 TFT LCD + panel connected using a MIPI-DSI video interface. + +allOf: + - $ref: panel-common.yaml# + +properties: + + compatible: + const: raydium,rm68200 + + reg: + maxItems: 1 + description: DSI virtual channel + + backlight: true + enable-gpios: true + port: true + power-supply: true + + reset-gpios: + maxItems: 1 + +additionalProperties: false + +required: + - compatible + - power-supply + - reg + +examples: + - | + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "raydium,rm68200"; + reg = <0>; + reset-gpios = <&gpiof 15 0>; + power-supply = <&v1v8>; + backlight = <&pwm_backlight>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml new file mode 100644 index 000000000..09b5eb754 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/rocktech,jh057n00900.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rocktech JH057N00900 5.5" 720x1440 TFT LCD panel + +maintainers: + - Ondrej Jirman <megi@xff.cz> + - Guido GÅnther <agx@sigxcpu.org> + +description: + Rocktech JH057N00900 is a 720x1440 TFT LCD panel + connected using a MIPI-DSI video interface. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + enum: + # Rocktech JH057N00900 5.5" 720x1440 TFT LCD panel + - rocktech,jh057n00900 + # Xingbangda XBD599 5.99" 720x1440 TFT LCD panel + - xingbangda,xbd599 + + port: true + reg: + maxItems: 1 + description: DSI virtual channel + + vcc-supply: + description: Panel power supply + + iovcc-supply: + description: I/O voltage supply + + reset-gpios: true + + backlight: true + +required: + - compatible + - reg + - vcc-supply + - iovcc-supply + - reset-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "rocktech,jh057n00900"; + reg = <0>; + vcc-supply = <®_2v8_p>; + iovcc-supply = <®_1v8_p>; + reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>; + backlight = <&backlight>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml b/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml new file mode 100644 index 000000000..d67617f6f --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0+ OR X11) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/ronbo,rb070d30.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ronbo RB070D30 DSI Display Panel + +maintainers: + - Maxime Ripard <mripard@kernel.org> + +properties: + compatible: + const: ronbo,rb070d30 + + reg: + description: MIPI-DSI virtual channel + + power-gpios: + description: GPIO used for the power pin + maxItems: 1 + + reset-gpios: + description: GPIO used for the reset pin + maxItems: 1 + + shlr-gpios: + description: GPIO used for the shlr pin (horizontal flip) + maxItems: 1 + + updn-gpios: + description: GPIO used for the updn pin (vertical flip) + maxItems: 1 + + vcc-lcd-supply: + description: Power regulator + + backlight: + description: Backlight used by the panel + $ref: "/schemas/types.yaml#/definitions/phandle" + +required: + - compatible + - power-gpios + - reg + - reset-gpios + - shlr-gpios + - updn-gpios + - vcc-lcd-supply + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml new file mode 100644 index 000000000..ccc482570 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/samsung,amoled-mipi-dsi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung AMOLED MIPI-DSI panels + +maintainers: + - Hoegeun Kwon <hoegeun.kwon@samsung.com> + +allOf: + - $ref: panel-common.yaml# + + - if: + properties: + compatible: + contains: + enum: + - samsung,s6e3ha2 + - samsung,s6e3hf2 + then: + required: + - enable-gpios + +properties: + compatible: + enum: + # Samsung S6E63J0X03 1.63" 320x320 AMOLED panel + - samsung,s6e63j0x03 + # Samsung S6E3HA2 5.7" 1440x2560 AMOLED panel + - samsung,s6e3ha2 + # Samsung S6E3HF2 5.65" 1600x2560 AMOLED panel + - samsung,s6e3hf2 + + reg: true + reset-gpios: true + enable-gpios: true + te-gpios: true + + vdd3-supply: + description: I/O voltage supply + + vci-supply: + description: voltage supply for analog circuits + +required: + - compatible + - reg + - vdd3-supply + - vci-supply + - reset-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "samsung,s6e3ha2"; + reg = <0>; + vdd3-supply = <&ldo27_reg>; + vci-supply = <&ldo28_reg>; + reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>; + enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>; + te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml b/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml new file mode 100644 index 000000000..060ee27a4 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml @@ -0,0 +1,107 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/samsung,ld9040.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung LD9040 AMOLED LCD parallel RGB panel with SPI control bus + +description: | + The panel must obey the rules for a SPI slave device as specified in + spi/spi-controller.yaml + +maintainers: + - Andrzej Hajda <a.hajda@samsung.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: samsung,ld9040 + + display-timings: true + port: true + reg: true + reset-gpios: true + + vdd3-supply: + description: core voltage supply + + vci-supply: + description: voltage supply for analog circuits + + power-on-delay: + $ref: /schemas/types.yaml#/definitions/uint32 + description: delay after turning regulators on [ms] + + reset-delay: + $ref: /schemas/types.yaml#/definitions/uint32 + description: delay after reset sequence [ms] + + panel-width-mm: + description: physical panel width [mm] + + panel-height-mm: + description: physical panel height [mm] + +required: + - compatible + - reg + - vdd3-supply + - vci-supply + - reset-gpios + - display-timings + +unevaluatedProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + lcd@0 { + compatible = "samsung,ld9040"; + #address-cells = <1>; + #size-cells = <0>; + + reg = <0>; + vdd3-supply = <&ldo7_reg>; + vci-supply = <&ldo17_reg>; + reset-gpios = <&gpy4 5 0>; + spi-max-frequency = <1200000>; + spi-cpol; + spi-cpha; + power-on-delay = <10>; + reset-delay = <10>; + panel-width-mm = <90>; + panel-height-mm = <154>; + + display-timings { + timing { + clock-frequency = <23492370>; + hactive = <480>; + vactive = <800>; + hback-porch = <16>; + hfront-porch = <16>; + vback-porch = <2>; + vfront-porch = <28>; + hsync-len = <2>; + vsync-len = <1>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <0>; + pixelclk-active = <0>; + }; + }; + + port { + lcd_ep: endpoint { + remote-endpoint = <&fimd_dpi_ep>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.yaml new file mode 100644 index 000000000..66d147496 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/samsung,s6d16d0.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S6D16D0 4" 864x480 AMOLED panel + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: samsung,s6d16d0 + + port: true + reg: true + reset-gpios: true + + vdd1-supply: + description: I/O voltage supply + +required: + - compatible + - reg + - vdd1-supply + - reset-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "samsung,s6d16d0"; + reg = <0>; + vdd1-supply = <&foo>; + reset-gpios = <&foo_gpio 0 GPIO_ACTIVE_LOW>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.yaml new file mode 100644 index 000000000..1dab80ae1 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/samsung,s6e63m0.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung s6e63m0 AMOLED LCD panel + +maintainers: + - Jonathan Bakker <xc-racer2@live.ca> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: samsung,s6e63m0 + + reg: true + reset-gpios: true + port: true + + vdd3-supply: + description: VDD regulator + + vci-supply: + description: VCI regulator + +required: + - compatible + - reset-gpios + - vdd3-supply + - vci-supply + - port + +unevaluatedProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + display@0 { + compatible = "samsung,s6e63m0"; + reg = <0>; + reset-gpios = <&mp05 5 1>; + vdd3-supply = <&ldo12_reg>; + vci-supply = <&ldo11_reg>; + spi-max-frequency = <1200000>; + + port { + lcd_ep: endpoint { + remote-endpoint = <&fimd_ep>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml new file mode 100644 index 000000000..44ce98f68 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/samsung,s6e88a0-ams452ef01.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung AMS452EF01 AMOLED panel with S6E88A0 video mode DSI controller + +maintainers: + - Michael Srba <Michael.Srba@seznam.cz> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: samsung,s6e88a0-ams452ef01 + reg: true + reset-gpios: true + vdd3-supply: + description: core voltage supply + vci-supply: + description: voltage supply for analog circuits + +required: + - compatible + - reg + - vdd3-supply + - vci-supply + - reset-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + reg = <0>; + + compatible = "samsung,s6e88a0-ams452ef01"; + + vdd3-supply = <&pm8916_l17>; + vci-supply = <®_vlcd_vci>; + reset-gpios = <&msmgpio 25 GPIO_ACTIVE_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml new file mode 100644 index 000000000..ca9594515 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml @@ -0,0 +1,100 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/samsung,s6e8aa0.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S6E8AA0 AMOLED LCD 5.3 inch panel + +maintainers: + - Andrzej Hajda <a.hajda@samsung.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: samsung,s6e8aa0 + + reg: true + reset-gpios: true + display-timings: true + + vdd3-supply: + description: core voltage supply + + vci-supply: + description: voltage supply for analog circuits + + power-on-delay: + description: delay after turning regulators on [ms] + $ref: /schemas/types.yaml#/definitions/uint32 + + reset-delay: + description: delay after reset sequence [ms] + $ref: /schemas/types.yaml#/definitions/uint32 + + init-delay: + description: delay after initialization sequence [ms] + + panel-width-mm: + description: physical panel width [mm] + + panel-height-mm: + description: physical panel height [mm] + + flip-horizontal: + description: boolean to flip image horizontally + type: boolean + + flip-vertical: + description: boolean to flip image vertically + type: boolean + +required: + - compatible + - reg + - vdd3-supply + - vci-supply + - reset-gpios + - display-timings + +additionalProperties: false + +examples: + - | + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "samsung,s6e8aa0"; + reg = <0>; + vdd3-supply = <&vcclcd_reg>; + vci-supply = <&vlcd_reg>; + reset-gpios = <&gpy4 5 0>; + power-on-delay= <50>; + reset-delay = <100>; + init-delay = <100>; + panel-width-mm = <58>; + panel-height-mm = <103>; + flip-horizontal; + flip-vertical; + + display-timings { + timing0: timing-0 { + clock-frequency = <57153600>; + hactive = <720>; + vactive = <1280>; + hfront-porch = <5>; + hback-porch = <5>; + hsync-len = <5>; + vfront-porch = <13>; + vback-porch = <1>; + vsync-len = <2>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/seiko,43wvf1g.yaml b/Documentation/devicetree/bindings/display/panel/seiko,43wvf1g.yaml new file mode 100644 index 000000000..cfaa50cf5 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/seiko,43wvf1g.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/seiko,43wvf1g.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Seiko Instruments Inc. 4.3" WVGA (800 x RGB x 480) TFT with Touch-Panel + +maintainers: + - Marco Franchi <marco.franchi@nxp.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: sii,43wvf1g + + backlight: true + port: true + + dvdd-supply: + description: 3v3 digital regulator + + avdd-supply: + description: 5v analog regulator + +required: + - compatible + - dvdd-supply + - avdd-supply + +additionalProperties: false + +examples: + - | + panel { + compatible = "sii,43wvf1g"; + + backlight = <&backlight_display>; + dvdd-supply = <®_lcd_3v3>; + avdd-supply = <®_lcd_5v>; + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/sgd,gktw70sdae4se.yaml b/Documentation/devicetree/bindings/display/panel/sgd,gktw70sdae4se.yaml new file mode 100644 index 000000000..e63a570ae --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/sgd,gktw70sdae4se.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/sgd,gktw70sdae4se.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Solomon Goldentek Display GKTW70SDAE4SE 7" WVGA LVDS Display Panel + +maintainers: + - Neil Armstrong <narmstrong@baylibre.com> + - Thierry Reding <thierry.reding@gmail.com> + +allOf: + - $ref: lvds.yaml# + +properties: + compatible: + items: + - const: sgd,gktw70sdae4se + - {} # panel-lvds, but not listed here to avoid false select + + data-mapping: + const: jeida-18 + + width-mm: + const: 153 + + height-mm: + const: 86 + + panel-timing: true + port: true + +additionalProperties: false + +required: + - compatible + +examples: + - |+ + panel { + compatible = "sgd,gktw70sdae4se", "panel-lvds"; + + width-mm = <153>; + height-mm = <86>; + + data-mapping = "jeida-18"; + + panel-timing { + clock-frequency = <32000000>; + hactive = <800>; + vactive = <480>; + hback-porch = <39>; + hfront-porch = <39>; + vback-porch = <29>; + vfront-porch = <13>; + hsync-len = <47>; + vsync-len = <2>; + }; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds_encoder>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/sharp,ld-d5116z01b.yaml b/Documentation/devicetree/bindings/display/panel/sharp,ld-d5116z01b.yaml new file mode 100644 index 000000000..fbb647eb3 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/sharp,ld-d5116z01b.yaml @@ -0,0 +1,30 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/sharp,ld-d5116z01b.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sharp LD-D5116Z01B 12.3" WUXGA+ eDP panel + +maintainers: + - Jeffrey Hugo <jeffrey.l.hugo@gmail.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: sharp,ld-d5116z01b + + power-supply: true + backlight: true + port: true + no-hpd: true + +additionalProperties: false + +required: + - compatible + - power-supply + +... diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.yaml b/Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.yaml new file mode 100644 index 000000000..a679d3647 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/sharp,lq101r1sx01.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sharp Microelectronics 10.1" WQXGA TFT LCD panel + +maintainers: + - Thierry Reding <treding@nvidia.com> + +description: | + This panel requires a dual-channel DSI host to operate. It supports two modes: + - left-right: each channel drives the left or right half of the screen + - even-odd: each channel drives the even or odd lines of the screen + + Each of the DSI channels controls a separate DSI peripheral. The peripheral + driven by the first link (DSI-LINK1), left or even, is considered the primary + peripheral and controls the device. The 'link2' property contains a phandle + to the peripheral driven by the second link (DSI-LINK2, right or odd). + + Note that in video mode the DSI-LINK1 interface always provides the left/even + pixels and DSI-LINK2 always provides the right/odd pixels. In command mode it + is possible to program either link to drive the left/even or right/odd pixels + but for the sake of consistency this binding assumes that the same assignment + is chosen as for video mode. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: sharp,lq101r1sx01 + + reg: true + power-supply: true + backlight: true + + link2: + $ref: /schemas/types.yaml#/definitions/phandle + description: | + phandle to the DSI peripheral on the secondary link. Note that the + presence of this property marks the containing node as DSI-LINK1 + +required: + - compatible + - reg + +if: + required: + - link2 +then: + required: + - power-supply + +additionalProperties: false + +examples: + - | + dsi0: dsi@fd922800 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0xfd922800 0x200>; + + panel: panel@0 { + compatible = "sharp,lq101r1sx01"; + reg = <0>; + + link2 = <&secondary>; + + power-supply = <&power>; + backlight = <&backlight>; + }; + }; + + dsi1: dsi@fd922a00 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0xfd922a00 0x200>; + + secondary: panel@0 { + compatible = "sharp,lq101r1sx01"; + reg = <0>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.yaml b/Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.yaml new file mode 100644 index 000000000..92f2d12f4 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/sharp,lq150x1lg11.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sharp 15" LQ150X1LG11 XGA TFT LCD panel + +maintainers: + - Peter Rosin <peda@axentia.se> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: sharp,lq150x1lg11 + + power-supply: true + backlight: true + + rlud-gpios: + maxItems: 1 + description: | + GPIO for the RL/UD (rotate 180 degrees) pin. + If rlud-gpios and/or sellvds-gpios are not specified, + the RL/UD and/or SELLVDS pins are assumed to be handled + appropriately by the hardware. + + sellvds-gpios: + maxItems: 1 + description: | + GPIO for the SELLVDS pin. + If rlud-gpios and/or sellvds-gpios are not specified, + the RL/UD and/or SELLVDS pins are assumed to be handled + appropriately by the hardware. + +required: + - compatible + - power-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + panel { + compatible = "sharp,lq150x1lg11"; + + power-supply = <&vcc_3v3_reg>; /* VCC */ + + backlight = <&backlight>; + rlud-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; /* RL/UD */ + sellvds-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; /* SELLVDS */ + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/sharp,ls037v7dw01.yaml b/Documentation/devicetree/bindings/display/panel/sharp,ls037v7dw01.yaml new file mode 100644 index 000000000..8c47a9b0b --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/sharp,ls037v7dw01.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/sharp,ls037v7dw01.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SHARP LS037V7DW01 TFT-LCD panel + +description: | + This panel can have zero to five GPIOs to configure to change configuration + between QVGA and VGA mode and the scan direction. As these pins can be also + configured with external pulls, all the GPIOs are considered optional with holes + in the array. + +maintainers: + - Tony Lindgren <tony@atomide.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: sharp,ls037v7dw01 + + label: true + enable-gpios: true + reset-gpios: true + port: true + power-supply: true + + mode-gpios: + minItems: 1 + maxItems: 3 + description: | + GPIO ordered MO, LR, and UD as specified in LS037V7DW01.pdf + This panel can have zero to three GPIOs to configure to + change configuration between QVGA and VGA mode and the + scan direction. As these pins can be also configured + with external pulls, all the GPIOs are considered + optional with holes in the array. + +required: + - compatible + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + lcd0: display { + compatible = "sharp,ls037v7dw01"; + power-supply = <&lcd_3v3>; + enable-gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>; /* gpio152, lcd INI */ + reset-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd RESB */ + mode-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH /* gpio154, lcd MO */ + &gpio1 2 GPIO_ACTIVE_HIGH /* gpio2, lcd LR */ + &gpio1 3 GPIO_ACTIVE_HIGH>; /* gpio3, lcd UD */ + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.yaml b/Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.yaml new file mode 100644 index 000000000..a90d0d8bf --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/sharp,ls043t1le01.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sharp Microelectronics 4.3" qHD TFT LCD panel + +maintainers: + - Werner Johansson <werner.johansson@sonymobile.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: sharp,ls043t1le01-qhd + + reg: true + backlight: true + reset-gpios: true + port: true + + avdd-supply: + description: handle of the regulator that provides the supply voltage + +required: + - compatible + - reg + - avdd-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "sharp,ls043t1le01-qhd"; + reg = <0>; + avdd-supply = <&pm8941_l22>; + backlight = <&pm8941_wled>; + reset-gpios = <&pm8941_gpios 19 GPIO_ACTIVE_HIGH>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/sitronix,st7701.yaml b/Documentation/devicetree/bindings/display/panel/sitronix,st7701.yaml new file mode 100644 index 000000000..6dff59fe4 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/sitronix,st7701.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/sitronix,st7701.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sitronix ST7701 based LCD panels + +maintainers: + - Jagan Teki <jagan@amarulasolutions.com> + +description: | + ST7701 designed for small and medium sizes of TFT LCD display, is + capable of supporting up to 480RGBX864 in resolution. It provides + several system interfaces like MIPI/RGB/SPI. + + Techstar TS8550B is 480x854, 2-lane MIPI DSI LCD panel which has + inbuilt ST7701 chip. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - enum: + - techstar,ts8550b + - const: sitronix,st7701 + + reg: + description: DSI virtual channel used by that screen + maxItems: 1 + + VCC-supply: + description: analog regulator for MIPI circuit + + IOVCC-supply: + description: I/O system regulator + + reset-gpios: true + + backlight: true + +required: + - compatible + - reg + - VCC-supply + - IOVCC-supply + - reset-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "techstar,ts8550b", "sitronix,st7701"; + reg = <0>; + VCC-supply = <®_dldo2>; + IOVCC-supply = <®_dldo2>; + reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* LCD-RST: PD24 */ + backlight = <&backlight>; + }; + }; diff --git a/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml b/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml new file mode 100644 index 000000000..fa46d151e --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/sitronix,st7789v.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sitronix ST7789V RGB panel with SPI control bus + +description: | + The panel must obey the rules for a SPI slave device as specified in + spi/spi-controller.yaml + +maintainers: + - Maxime Ripard <mripard@kernel.org> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: sitronix,st7789v + + reg: true + reset-gpios: true + power-supply: true + backlight: true + port: true + +required: + - compatible + - reg + - reset-gpios + - power-supply + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "sitronix,st7789v"; + reg = <0>; + reset-gpios = <&pio 6 11 GPIO_ACTIVE_LOW>; + backlight = <&pwm_bl>; + power-supply = <&power>; + spi-max-frequency = <100000>; + spi-cpol; + spi-cpha; + + port { + panel_input: endpoint { + remote-endpoint = <&tcon0_out_panel>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml b/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml new file mode 100644 index 000000000..78d060097 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/sony,acx424akp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sony ACX424AKP 4" 480x864 AMOLED panel + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: sony,acx424akp + reg: true + reset-gpios: true + vddi-supply: + description: regulator that supplies the vddi voltage + enforce-video-mode: true + +required: + - compatible + - reg + - reset-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi-controller@a0351000 { + compatible = "ste,mcde-dsi"; + reg = <0xa0351000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "sony,acx424akp"; + reg = <0>; + vddi-supply = <&foo>; + reset-gpios = <&foo_gpio 0 GPIO_ACTIVE_LOW>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/sony,acx565akm.yaml b/Documentation/devicetree/bindings/display/panel/sony,acx565akm.yaml new file mode 100644 index 000000000..95d053c54 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/sony,acx565akm.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/sony,acx565akm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sony ACX565AKM SDI Panel + +description: | + The panel must obey the rules for a SPI slave device as specified in + spi/spi-controller.yaml + +maintainers: + - Tomi Valkeinen <tomi.valkeinen@ti.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: sony,acx565akm + + label: true + reset-gpios: true + port: true + +required: + - compatible + - port + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + panel@2 { + compatible = "sony,acx565akm"; + spi-max-frequency = <6000000>; + reg = <2>; + + label = "lcd"; + reset-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* 90 */ + + port { + lcd_in: endpoint { + remote-endpoint = <&sdi_out>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/startek,startek-kd050c.yaml b/Documentation/devicetree/bindings/display/panel/startek,startek-kd050c.yaml new file mode 100644 index 000000000..fd668640a --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/startek,startek-kd050c.yaml @@ -0,0 +1,33 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/startek,startek-kd050c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Startek Electronic Technology Co. KD050C 5.0" WVGA TFT LCD panel + +maintainers: + - Nikita Kiryanov <nikita@compulab.co.il> + +allOf: + - $ref: panel-dpi.yaml# + +properties: + compatible: + items: + - const: startek,startek-kd050c + - {} # panel-dpi, but not listed here to avoid false select + + backlight: true + enable-gpios: true + height-mm: true + label: true + panel-timing: true + port: true + power-supply: true + reset-gpios: true + width-mm: true + +additionalProperties: false + +... diff --git a/Documentation/devicetree/bindings/display/panel/tfc,s9700rtwv43tr-01b.yaml b/Documentation/devicetree/bindings/display/panel/tfc,s9700rtwv43tr-01b.yaml new file mode 100644 index 000000000..9e5994417 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/tfc,s9700rtwv43tr-01b.yaml @@ -0,0 +1,33 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/tfc,s9700rtwv43tr-01b.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TFC S9700RTWV43TR-01B 7" Three Five Corp 800x480 LCD panel with resistive touch + +maintainers: + - Jyri Sarha <jsarha@ti.com> + - Thierry Reding <thierry.reding@gmail.com> + +description: |+ + The panel is found on TI AM335x-evm. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: tfc,s9700rtwv43tr-01b + + enable-gpios: true + backlight: true + port: true + +additionalProperties: false + +required: + - compatible + - power-supply + +... diff --git a/Documentation/devicetree/bindings/display/panel/ti,nspire.yaml b/Documentation/devicetree/bindings/display/panel/ti,nspire.yaml new file mode 100644 index 000000000..5c5a3b519 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/ti,nspire.yaml @@ -0,0 +1,36 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/ti,nspire.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments NSPIRE Display Panels + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + enum: + - ti,nspire-cx-lcd-panel + - ti,nspire-classic-lcd-panel + port: true + +required: + - compatible + +additionalProperties: false + +examples: + - | + panel { + compatible = "ti,nspire-cx-lcd-panel"; + port { + panel_in: endpoint { + remote-endpoint = <&pads>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/panel/tpo,td.yaml b/Documentation/devicetree/bindings/display/panel/tpo,td.yaml new file mode 100644 index 000000000..4aa605613 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/tpo,td.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/tpo,td.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Toppoly TD Panels + +description: | + The panel must obey the rules for a SPI slave device as specified in + spi/spi-controller.yaml + +maintainers: + - Marek Belisko <marek@goldelico.com> + - H. Nikolaus Schaller <hns@goldelico.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + enum: + # Toppoly TD028TTEC1 Panel + - tpo,td028ttec1 + # Toppoly TD043MTEA1 Panel + - tpo,td043mtea1 + + reg: true + label: true + reset-gpios: true + backlight: true + port: true + +required: + - compatible + - port + +unevaluatedProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + panel: panel@0 { + compatible = "tpo,td043mtea1"; + reg = <0>; + spi-max-frequency = <100000>; + spi-cpol; + spi-cpha; + + label = "lcd"; + + reset-gpios = <&gpio7 7 0>; + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml b/Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml new file mode 100644 index 000000000..6f1f02044 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml @@ -0,0 +1,103 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/tpo,tpg110.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TPO TPG110 Panel + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + - Thierry Reding <thierry.reding@gmail.com> + +description: |+ + This panel driver is a component that acts as an intermediary + between an RGB output and a variety of panels. The panel + driver is strapped up in electronics to the desired resolution + and other properties, and has a control interface over 3WIRE + SPI. By talking to the TPG110 over SPI, the strapped properties + can be discovered and the hardware is therefore mostly + self-describing. + + +--------+ + SPI -> | TPO | -> physical display + RGB -> | TPG110 | + +--------+ + + If some electrical strap or alternate resolution is desired, + this can be set up by taking software control of the display + over the SPI interface. The interface can also adjust + for properties of the display such as gamma correction and + certain electrical driving levels. + + The TPG110 does not know the physical dimensions of the panel + connected, so this needs to be specified in the device tree. + + It requires a GPIO line for control of its reset line. + + The serial protocol has line names that resemble I2C but the + protocol is not I2C but 3WIRE SPI. + + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - ste,nomadik-nhk15-display + - const: tpo,tpg110 + - const: tpo,tpg110 + + reg: true + + grestb-gpios: + maxItems: 1 + description: panel reset GPIO + + spi-3wire: true + + spi-max-frequency: + const: 3000000 + +required: + - compatible + - reg + - grestb-gpios + - width-mm + - height-mm + - spi-3wire + - spi-max-frequency + - port + +unevaluatedProperties: false + +examples: + - |+ + spi { + #address-cells = <1>; + #size-cells = <0>; + + panel: display@0 { + compatible = "tpo,tpg110"; + reg = <0>; + spi-3wire; + /* 320 ns min period ~= 3 MHz */ + spi-max-frequency = <3000000>; + /* Width and height from data sheet */ + width-mm = <116>; + height-mm = <87>; + grestb-gpios = <&foo_gpio 5 1>; + backlight = <&bl>; + + port { + nomadik_clcd_panel: endpoint { + remote-endpoint = <&foo>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml b/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml new file mode 100644 index 000000000..076b057b4 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/visionox,rm69299.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Visionox model RM69299 Panels Device Tree Bindings. + +maintainers: + - Harigovindan P <harigovi@codeaurora.org> + +description: | + This binding is for display panels using a Visionox RM692999 panel. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: visionox,rm69299-1080p-display + + vdda-supply: + description: | + Phandle of the regulator that provides the vdda supply voltage. + + vdd3p3-supply: + description: | + Phandle of the regulator that provides the vdd3p3 supply voltage. + + port: true + reset-gpios: true + +additionalProperties: false + +required: + - compatible + - vdda-supply + - vdd3p3-supply + - reset-gpios + - port + +examples: + - | + panel { + compatible = "visionox,rm69299-1080p-display"; + + vdda-supply = <&src_pp1800_l8c>; + vdd3p3-supply = <&src_pp2800_l18a>; + + reset-gpios = <&pm6150l_gpio 3 0>; + port { + panel0_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml b/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml new file mode 100644 index 000000000..d5c46a3cc --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/xinpeng,xpp055c272.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xinpeng XPP055C272 5.5in 720x1280 DSI panel + +maintainers: + - Heiko Stuebner <heiko.stuebner@theobroma-systems.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: xinpeng,xpp055c272 + reg: true + backlight: true + reset-gpios: true + iovcc-supply: + description: regulator that supplies the iovcc voltage + vci-supply: + description: regulator that supplies the vci voltage + +required: + - compatible + - reg + - backlight + - iovcc-supply + - vci-supply + +additionalProperties: false + +examples: + - | + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "xinpeng,xpp055c272"; + reg = <0>; + backlight = <&backlight>; + iovcc-supply = <&vcc_1v8>; + vci-supply = <&vcc3v3_lcd>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/renesas,cmm.yaml b/Documentation/devicetree/bindings/display/renesas,cmm.yaml new file mode 100644 index 000000000..561efaaa5 --- /dev/null +++ b/Documentation/devicetree/bindings/display/renesas,cmm.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/renesas,cmm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car Color Management Module (CMM) + +maintainers: + - Laurent Pinchart <laurent.pinchart@ideasonboard.com> + - Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> + - Jacopo Mondi <jacopo+renesas@jmondi.org> + +description: |+ + Renesas R-Car color management module connected to R-Car DU video channels. + It provides image enhancement functions such as 1-D look-up tables (LUT), + 3-D look-up tables (CLU), 1D-histogram generation (HGO), and color + space conversion (CSC). + +properties: + compatible: + oneOf: + - items: + - enum: + - renesas,r8a7795-cmm + - renesas,r8a7796-cmm + - renesas,r8a77965-cmm + - renesas,r8a77990-cmm + - renesas,r8a77995-cmm + - const: renesas,rcar-gen3-cmm + - items: + - const: renesas,rcar-gen2-cmm + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - resets + - power-domains + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/r8a7796-cpg-mssr.h> + #include <dt-bindings/power/r8a7796-sysc.h> + + cmm0: cmm@fea40000 { + compatible = "renesas,r8a7796-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0xfea40000 0x1000>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 711>; + resets = <&cpg 711>; + }; diff --git a/Documentation/devicetree/bindings/display/renesas,du.txt b/Documentation/devicetree/bindings/display/renesas,du.txt new file mode 100644 index 000000000..7d65c24fc --- /dev/null +++ b/Documentation/devicetree/bindings/display/renesas,du.txt @@ -0,0 +1,145 @@ +* Renesas R-Car Display Unit (DU) + +Required Properties: + + - compatible: must be one of the following. + - "renesas,du-r8a7742" for R8A7742 (RZ/G1H) compatible DU + - "renesas,du-r8a7743" for R8A7743 (RZ/G1M) compatible DU + - "renesas,du-r8a7744" for R8A7744 (RZ/G1N) compatible DU + - "renesas,du-r8a7745" for R8A7745 (RZ/G1E) compatible DU + - "renesas,du-r8a77470" for R8A77470 (RZ/G1C) compatible DU + - "renesas,du-r8a774a1" for R8A774A1 (RZ/G2M) compatible DU + - "renesas,du-r8a774b1" for R8A774B1 (RZ/G2N) compatible DU + - "renesas,du-r8a774c0" for R8A774C0 (RZ/G2E) compatible DU + - "renesas,du-r8a774e1" for R8A774E1 (RZ/G2H) compatible DU + - "renesas,du-r8a7779" for R8A7779 (R-Car H1) compatible DU + - "renesas,du-r8a7790" for R8A7790 (R-Car H2) compatible DU + - "renesas,du-r8a7791" for R8A7791 (R-Car M2-W) compatible DU + - "renesas,du-r8a7792" for R8A7792 (R-Car V2H) compatible DU + - "renesas,du-r8a7793" for R8A7793 (R-Car M2-N) compatible DU + - "renesas,du-r8a7794" for R8A7794 (R-Car E2) compatible DU + - "renesas,du-r8a7795" for R8A7795 (R-Car H3) compatible DU + - "renesas,du-r8a7796" for R8A7796 (R-Car M3-W) compatible DU + - "renesas,du-r8a77961" for R8A77961 (R-Car M3-W+) compatible DU + - "renesas,du-r8a77965" for R8A77965 (R-Car M3-N) compatible DU + - "renesas,du-r8a77970" for R8A77970 (R-Car V3M) compatible DU + - "renesas,du-r8a77980" for R8A77980 (R-Car V3H) compatible DU + - "renesas,du-r8a77990" for R8A77990 (R-Car E3) compatible DU + - "renesas,du-r8a77995" for R8A77995 (R-Car D3) compatible DU + + - reg: the memory-mapped I/O registers base address and length + + - interrupts: Interrupt specifiers for the DU interrupts. + + - clocks: A list of phandles + clock-specifier pairs, one for each entry in + the clock-names property. + - clock-names: Name of the clocks. This property is model-dependent. + - R8A7779 uses a single functional clock. The clock doesn't need to be + named. + - All other DU instances use one functional clock per channel The + functional clocks must be named "du.x" with "x" being the channel + numerical index. + - In addition to the functional clocks, all DU versions also support + externally supplied pixel clocks. Those clocks are optional. When + supplied they must be named "dclkin.x" with "x" being the input clock + numerical index. + + - renesas,cmms: A list of phandles to the CMM instances present in the SoC, + one for each available DU channel. The property shall not be specified for + SoCs that do not provide any CMM (such as V3M and V3H). + + - renesas,vsps: A list of phandle and channel index tuples to the VSPs that + handle the memory interfaces for the DU channels. The phandle identifies the + VSP instance that serves the DU channel, and the channel index identifies + the LIF instance in that VSP. + +Optional properties: + - resets: A list of phandle + reset-specifier pairs, one for each entry in + the reset-names property. + - reset-names: Names of the resets. This property is model-dependent. + - All but R8A7779 use one reset for a group of one or more successive + channels. The resets must be named "du.x" with "x" being the numerical + index of the lowest channel in the group. + +Required nodes: + +The connections to the DU output video ports are modeled using the OF graph +bindings specified in Documentation/devicetree/bindings/graph.txt. + +The following table lists for each supported model the port number +corresponding to each DU output. + + Port0 Port1 Port2 Port3 +----------------------------------------------------------------------------- + R8A7742 (RZ/G1H) DPAD 0 LVDS 0 LVDS 1 - + R8A7743 (RZ/G1M) DPAD 0 LVDS 0 - - + R8A7744 (RZ/G1N) DPAD 0 LVDS 0 - - + R8A7745 (RZ/G1E) DPAD 0 DPAD 1 - - + R8A77470 (RZ/G1C) DPAD 0 DPAD 1 LVDS 0 - + R8A774A1 (RZ/G2M) DPAD 0 HDMI 0 LVDS 0 - + R8A774B1 (RZ/G2N) DPAD 0 HDMI 0 LVDS 0 - + R8A774C0 (RZ/G2E) DPAD 0 LVDS 0 LVDS 1 - + R8A774E1 (RZ/G2H) DPAD 0 HDMI 0 LVDS 0 - + R8A7779 (R-Car H1) DPAD 0 DPAD 1 - - + R8A7790 (R-Car H2) DPAD 0 LVDS 0 LVDS 1 - + R8A7791 (R-Car M2-W) DPAD 0 LVDS 0 - - + R8A7792 (R-Car V2H) DPAD 0 DPAD 1 - - + R8A7793 (R-Car M2-N) DPAD 0 LVDS 0 - - + R8A7794 (R-Car E2) DPAD 0 DPAD 1 - - + R8A7795 (R-Car H3) DPAD 0 HDMI 0 HDMI 1 LVDS 0 + R8A7796 (R-Car M3-W) DPAD 0 HDMI 0 LVDS 0 - + R8A77961 (R-Car M3-W+) DPAD 0 HDMI 0 LVDS 0 - + R8A77965 (R-Car M3-N) DPAD 0 HDMI 0 LVDS 0 - + R8A77970 (R-Car V3M) DPAD 0 LVDS 0 - - + R8A77980 (R-Car V3H) DPAD 0 LVDS 0 - - + R8A77990 (R-Car E3) DPAD 0 LVDS 0 LVDS 1 - + R8A77995 (R-Car D3) DPAD 0 LVDS 0 LVDS 1 - + + +Example: R8A7795 (R-Car H3) ES2.0 DU + + du: display@feb00000 { + compatible = "renesas,du-r8a7795"; + reg = <0 0xfeb00000 0 0x80000>; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 722>, + <&cpg CPG_MOD 721>; + clock-names = "du.0", "du.1", "du.2", "du.3"; + resets = <&cpg 724>, <&cpg 722>; + reset-names = "du.0", "du.2"; + renesas,cmms = <&cmm0>, <&cmm1>, <&cmm2>, <&cmm3>; + renesas,vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd0 1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + du_out_rgb: endpoint { + }; + }; + port@1 { + reg = <1>; + du_out_hdmi0: endpoint { + remote-endpoint = <&dw_hdmi0_in>; + }; + }; + port@2 { + reg = <2>; + du_out_hdmi1: endpoint { + remote-endpoint = <&dw_hdmi1_in>; + }; + }; + port@3 { + reg = <3>; + du_out_lvds0: endpoint { + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/repaper.txt b/Documentation/devicetree/bindings/display/repaper.txt new file mode 100644 index 000000000..f5f9f9cf6 --- /dev/null +++ b/Documentation/devicetree/bindings/display/repaper.txt @@ -0,0 +1,52 @@ +Pervasive Displays RePaper branded e-ink displays + +Required properties: +- compatible: "pervasive,e1144cs021" for 1.44" display + "pervasive,e1190cs021" for 1.9" display + "pervasive,e2200cs021" for 2.0" display + "pervasive,e2271cs021" for 2.7" display + +- panel-on-gpios: Timing controller power control +- discharge-gpios: Discharge control +- reset-gpios: RESET pin +- busy-gpios: BUSY pin + +Required property for e2271cs021: +- border-gpios: Border control + +The node for this driver must be a child node of a SPI controller, hence +all mandatory properties described in ../spi/spi-bus.txt must be specified. + +Optional property: +- pervasive,thermal-zone: name of thermometer's thermal zone + +Example: + + display_temp: lm75@48 { + compatible = "lm75b"; + reg = <0x48>; + #thermal-sensor-cells = <0>; + }; + + thermal-zones { + display { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&display_temp>; + }; + }; + + papirus27@0{ + compatible = "pervasive,e2271cs021"; + reg = <0>; + + spi-max-frequency = <8000000>; + + panel-on-gpios = <&gpio 23 0>; + border-gpios = <&gpio 14 0>; + discharge-gpios = <&gpio 15 0>; + reset-gpios = <&gpio 24 0>; + busy-gpios = <&gpio 25 0>; + + pervasive,thermal-zone = "display"; + }; diff --git a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt new file mode 100644 index 000000000..43561584c --- /dev/null +++ b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt @@ -0,0 +1,98 @@ +Rockchip RK3288 specific extensions to the Analogix Display Port +================================ + +Required properties: +- compatible: "rockchip,rk3288-dp", + "rockchip,rk3399-edp"; + +- reg: physical base address of the controller and length + +- clocks: from common clock binding: handle to dp clock. + of memory mapped region. + +- clock-names: from common clock binding: + Required elements: "dp" "pclk" + +- resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + +- pinctrl-names: Names corresponding to the chip hotplug pinctrl states. +- pinctrl-0: pin-control mode. should be <&edp_hpd> + +- reset-names: Must include the name "dp" + +- rockchip,grf: this soc should set GRF regs, so need get grf here. + +- ports: there are 2 port nodes with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + Port 0: contained 2 endpoints, connecting to the output of vop. + Port 1: contained 1 endpoint, connecting to the input of panel. + +Optional property for different chips: +- clocks: from common clock binding: handle to grf_vio clock. + +- clock-names: from common clock binding: + Required elements: "grf" + +For the below properties, please refer to Analogix DP binding document: + * Documentation/devicetree/bindings/display/bridge/analogix_dp.txt +- phys (required) +- phy-names (required) +- hpd-gpios (optional) +- force-hpd (optional) +------------------------------------------------------------------------------- + +Example: + dp-controller: dp@ff970000 { + compatible = "rockchip,rk3288-dp"; + reg = <0xff970000 0x4000>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_EDP>, <&cru PCLK_EDP_CTRL>; + clock-names = "dp", "pclk"; + phys = <&dp_phy>; + phy-names = "dp"; + + rockchip,grf = <&grf>; + resets = <&cru 111>; + reset-names = "dp"; + + pinctrl-names = "default"; + pinctrl-0 = <&edp_hpd>; + + + ports { + #address-cells = <1>; + #size-cells = <0>; + edp_in: port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + edp_in_vopb: endpoint@0 { + reg = <0>; + remote-endpoint = <&vopb_out_edp>; + }; + edp_in_vopl: endpoint@1 { + reg = <1>; + remote-endpoint = <&vopl_out_edp>; + }; + }; + + edp_out: port@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + edp_out_panel: endpoint { + reg = <0>; + remote-endpoint = <&panel_in_edp> + }; + }; + }; + }; + + pinctrl { + edp { + edp_hpd: edp-hpd { + rockchip,pins = <7 11 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/rockchip/cdn-dp-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/cdn-dp-rockchip.txt new file mode 100644 index 000000000..8df7d2e39 --- /dev/null +++ b/Documentation/devicetree/bindings/display/rockchip/cdn-dp-rockchip.txt @@ -0,0 +1,74 @@ +Rockchip RK3399 specific extensions to the cdn Display Port +================================ + +Required properties: +- compatible: must be "rockchip,rk3399-cdn-dp" + +- reg: physical base address of the controller and length + +- clocks: from common clock binding: handle to dp clock. + +- clock-names: from common clock binding: + Required elements: "core-clk" "pclk" "spdif" "grf" + +- resets : a list of phandle + reset specifier pairs +- reset-names : string of reset names + Required elements: "apb", "core", "dptx", "spdif" +- power-domains : power-domain property defined with a phandle + to respective power domain. +- assigned-clocks: main clock, should be <&cru SCLK_DP_CORE> +- assigned-clock-rates : the DP core clk frequency, shall be: 100000000 + +- rockchip,grf: this soc should set GRF regs, so need get grf here. + +- ports: contain a port nodes with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + contained 2 endpoints, connecting to the output of vop. + +- phys: from general PHY binding: the phandle for the PHY device. + +- extcon: extcon specifier for the Power Delivery + +- #sound-dai-cells = it must be 1 if your system is using 2 DAIs: I2S, SPDIF + +------------------------------------------------------------------------------- + +Example: + cdn_dp: dp@fec00000 { + compatible = "rockchip,rk3399-cdn-dp"; + reg = <0x0 0xfec00000 0x0 0x100000>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_DP_CORE>, <&cru PCLK_DP_CTRL>, + <&cru SCLK_SPDIF_REC_DPTX>, <&cru PCLK_VIO_GRF>; + clock-names = "core-clk", "pclk", "spdif", "grf"; + assigned-clocks = <&cru SCLK_DP_CORE>; + assigned-clock-rates = <100000000>; + power-domains = <&power RK3399_PD_HDCP>; + phys = <&tcphy0_dp>, <&tcphy1_dp>; + resets = <&cru SRST_DPTX_SPDIF_REC>; + reset-names = "spdif"; + extcon = <&fusb0>, <&fusb1>; + rockchip,grf = <&grf>; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + dp_in: port { + #address-cells = <1>; + #size-cells = <0>; + dp_in_vopb: endpoint@0 { + reg = <0>; + remote-endpoint = <&vopb_out_dp>; + }; + + dp_in_vopl: endpoint@1 { + reg = <1>; + remote-endpoint = <&vopl_out_dp>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt new file mode 100644 index 000000000..3d32ce137 --- /dev/null +++ b/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt @@ -0,0 +1,74 @@ +Rockchip DWC HDMI TX Encoder +============================ + +The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP +with a companion PHY IP. + +These DT bindings follow the Synopsys DWC HDMI TX bindings defined in +Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt with the +following device-specific properties. + + +Required properties: + +- compatible: should be one of the following: + "rockchip,rk3228-dw-hdmi" + "rockchip,rk3288-dw-hdmi" + "rockchip,rk3328-dw-hdmi" + "rockchip,rk3399-dw-hdmi" +- reg: See dw_hdmi.txt. +- reg-io-width: See dw_hdmi.txt. Shall be 4. +- interrupts: HDMI interrupt number +- clocks: See dw_hdmi.txt. +- clock-names: Shall contain "iahb" and "isfr" as defined in dw_hdmi.txt. +- ports: See dw_hdmi.txt. The DWC HDMI shall have a single port numbered 0 + corresponding to the video input of the controller. The port shall have two + endpoints, numbered 0 and 1, connected respectively to the vopb and vopl. +- rockchip,grf: Shall reference the GRF to mux vopl/vopb. + +Optional properties + +- ddc-i2c-bus: The HDMI DDC bus can be connected to either a system I2C master + or the functionally-reduced I2C master contained in the DWC HDMI. When + connected to a system I2C master this property contains a phandle to that + I2C master controller. +- clock-names: See dw_hdmi.txt. The "cec" clock is optional. +- clock-names: May contain "cec" as defined in dw_hdmi.txt. +- clock-names: May contain "grf", power for grf io. +- clock-names: May contain "vpll", external clock for some hdmi phy. +- phys: from general PHY binding: the phandle for the PHY device. +- phy-names: Should be "hdmi" if phys references an external phy. + +Optional pinctrl entry: +- If you have both a "unwedge" and "default" pinctrl entry, dw_hdmi + will switch to the unwedge pinctrl state for 10ms if it ever gets an + i2c timeout. It's intended that this unwedge pinctrl entry will + cause the SDA line to be driven low to work around a hardware + errata. + +Example: + +hdmi: hdmi@ff980000 { + compatible = "rockchip,rk3288-dw-hdmi"; + reg = <0xff980000 0x20000>; + reg-io-width = <4>; + ddc-i2c-bus = <&i2c5>; + rockchip,grf = <&grf>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>; + clock-names = "iahb", "isfr"; + ports { + hdmi_in: port { + #address-cells = <1>; + #size-cells = <0>; + hdmi_in_vopb: endpoint@0 { + reg = <0>; + remote-endpoint = <&vopb_out_hdmi>; + }; + hdmi_in_vopl: endpoint@1 { + reg = <1>; + remote-endpoint = <&vopl_out_hdmi>; + }; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt new file mode 100644 index 000000000..151be3bba --- /dev/null +++ b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt @@ -0,0 +1,92 @@ +Rockchip specific extensions to the Synopsys Designware MIPI DSI +================================ + +Required properties: +- #address-cells: Should be <1>. +- #size-cells: Should be <0>. +- compatible: one of + "rockchip,px30-mipi-dsi", "snps,dw-mipi-dsi" + "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi" + "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi" +- reg: Represent the physical address range of the controller. +- interrupts: Represent the controller's interrupt to the CPU(s). +- clocks, clock-names: Phandles to the controller's pll reference + clock(ref) when using an internal dphy and APB clock(pclk). + For RK3399, a phy config clock (phy_cfg) and a grf clock(grf) + are required. As described in [1]. +- rockchip,grf: this soc should set GRF regs to mux vopl/vopb. +- ports: contain a port node with endpoint definitions as defined in [2]. + For vopb,set the reg = <0> and set the reg = <1> for vopl. +- video port 0 for the VOP input, the remote endpoint maybe vopb or vopl +- video port 1 for either a panel or subsequent encoder + +Optional properties: +- phys: from general PHY binding: the phandle for the PHY device. +- phy-names: Should be "dphy" if phys references an external phy. +- power-domains: a phandle to mipi dsi power domain node. +- resets: list of phandle + reset specifier pairs, as described in [3]. +- reset-names: string reset name, must be "apb". + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt +[2] Documentation/devicetree/bindings/media/video-interfaces.txt +[3] Documentation/devicetree/bindings/reset/reset.txt + +Example: + mipi_dsi: mipi@ff960000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi"; + reg = <0xff960000 0x4000>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_MIPI_24M>, <&cru PCLK_MIPI_DSI0>; + clock-names = "ref", "pclk"; + resets = <&cru SRST_MIPIDSI0>; + reset-names = "apb"; + rockchip,grf = <&grf>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + mipi_in: port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + mipi_in_vopb: endpoint@0 { + reg = <0>; + remote-endpoint = <&vopb_out_mipi>; + }; + mipi_in_vopl: endpoint@1 { + reg = <1>; + remote-endpoint = <&vopl_out_mipi>; + }; + }; + + mipi_out: port@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + mipi_out_panel: endpoint { + remote-endpoint = <&panel_in_mipi>; + }; + }; + }; + + panel { + compatible ="boe,tv080wum-nl0"; + reg = <0>; + + enable-gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_en>; + backlight = <&backlight>; + + port { + panel_in_mipi: endpoint { + remote-endpoint = <&mipi_out_panel>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/rockchip/inno_hdmi-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/inno_hdmi-rockchip.txt new file mode 100644 index 000000000..cec21714f --- /dev/null +++ b/Documentation/devicetree/bindings/display/rockchip/inno_hdmi-rockchip.txt @@ -0,0 +1,49 @@ +Rockchip specific extensions to the Innosilicon HDMI +================================ + +Required properties: +- compatible: + "rockchip,rk3036-inno-hdmi"; +- reg: + Physical base address and length of the controller's registers. +- clocks, clock-names: + Phandle to hdmi controller clock, name should be "pclk" +- interrupts: + HDMI interrupt number +- ports: + Contain one port node with endpoint definitions as defined in + Documentation/devicetree/bindings/graph.txt. +- pinctrl-0, pinctrl-name: + Switch the iomux of HPD/CEC pins to HDMI function. + +Example: +hdmi: hdmi@20034000 { + compatible = "rockchip,rk3036-inno-hdmi"; + reg = <0x20034000 0x4000>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_HDMI>; + clock-names = "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_ctl>; + + hdmi_in: port { + #address-cells = <1>; + #size-cells = <0>; + hdmi_in_lcdc: endpoint@0 { + reg = <0>; + remote-endpoint = <&lcdc_out_hdmi>; + }; + }; +}; + +&pinctrl { + hdmi { + hdmi_ctl: hdmi-ctl { + rockchip,pins = <1 8 RK_FUNC_1 &pcfg_pull_none>, + <1 9 RK_FUNC_1 &pcfg_pull_none>, + <1 10 RK_FUNC_1 &pcfg_pull_none>, + <1 11 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + +}; diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml new file mode 100644 index 000000000..4110d003c --- /dev/null +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml @@ -0,0 +1,140 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/rockchip/rockchip,rk3066-hdmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip rk3066 HDMI controller + +maintainers: + - Sandy Huang <hjc@rock-chips.com> + - Heiko Stuebner <heiko@sntech.de> + +properties: + compatible: + const: rockchip,rk3066-hdmi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: hclk + + pinctrl-0: + maxItems: 2 + + pinctrl-names: + const: default + description: + Switch the iomux for the HPD/I2C pins to HDMI function. + + power-domains: + maxItems: 1 + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + This soc uses GRF regs to switch the HDMI TX input between vop0 and vop1. + + ports: + type: object + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + port@0: + type: object + description: + Port node with two endpoints, numbered 0 and 1, + connected respectively to vop0 and vop1. + + port@1: + type: object + description: + Port node with one endpoint connected to a hdmi-connector node. + + required: + - "#address-cells" + - "#size-cells" + - port@0 + - port@1 + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - pinctrl-0 + - pinctrl-names + - power-domains + - rockchip,grf + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/rk3066a-cru.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/pinctrl/rockchip.h> + #include <dt-bindings/power/rk3066-power.h> + hdmi: hdmi@10116000 { + compatible = "rockchip,rk3066-hdmi"; + reg = <0x10116000 0x2000>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_HDMI>; + clock-names = "hclk"; + pinctrl-0 = <&hdmii2c_xfer>, <&hdmi_hpd>; + pinctrl-names = "default"; + power-domains = <&power RK3066_PD_VIO>; + rockchip,grf = <&grf>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + hdmi_in: port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + hdmi_in_vop0: endpoint@0 { + reg = <0>; + remote-endpoint = <&vop0_out_hdmi>; + }; + hdmi_in_vop1: endpoint@1 { + reg = <1>; + remote-endpoint = <&vop1_out_hdmi>; + }; + }; + hdmi_out: port@1 { + reg = <1>; + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; + }; + }; + }; + + pinctrl { + hdmi { + hdmi_hpd: hdmi-hpd { + rockchip,pins = <0 RK_PA0 1 &pcfg_pull_default>; + }; + hdmii2c_xfer: hdmii2c-xfer { + rockchip,pins = <0 RK_PA1 1 &pcfg_pull_none>, + <0 RK_PA2 1 &pcfg_pull_none>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml new file mode 100644 index 000000000..7204da5eb --- /dev/null +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0-only) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/rockchip/rockchip-drm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip DRM master device + +maintainers: + - Sandy Huang <hjc@rock-chips.com> + - Heiko Stuebner <heiko@sntech.de> + +description: | + The Rockchip DRM master device is a virtual device needed to list all + vop devices or other display interface nodes that comprise the + graphics subsystem. + +properties: + compatible: + const: rockchip,display-subsystem + + ports: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: | + Should contain a list of phandles pointing to display interface port + of vop devices. vop definitions as defined in + Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml + +required: + - compatible + - ports + +additionalProperties: false + +examples: + - | + display-subsystem { + compatible = "rockchip,display-subsystem"; + ports = <&vopl_out>, <&vopb_out>; + }; diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt b/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt new file mode 100644 index 000000000..aaf8c44cf --- /dev/null +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt @@ -0,0 +1,92 @@ +Rockchip RK3288 LVDS interface +================================ + +Required properties: +- compatible: matching the soc type, one of + - "rockchip,rk3288-lvds"; + - "rockchip,px30-lvds"; + +- reg: physical base address of the controller and length + of memory mapped region. +- clocks: must include clock specifiers corresponding to entries in the + clock-names property. +- clock-names: must contain "pclk_lvds" + +- avdd1v0-supply: regulator phandle for 1.0V analog power +- avdd1v8-supply: regulator phandle for 1.8V analog power +- avdd3v3-supply: regulator phandle for 3.3V analog power + +- rockchip,grf: phandle to the general register files syscon +- rockchip,output: "rgb", "lvds" or "duallvds", This describes the output interface + +- phys: LVDS/DSI DPHY (px30 only) +- phy-names: name of the PHY, must be "dphy" (px30 only) + +Optional properties: +- pinctrl-names: must contain a "lcdc" entry. +- pinctrl-0: pin control group to be used for this controller. + +Required nodes: + +The lvds has two video ports as described by + Documentation/devicetree/bindings/media/video-interfaces.txt +Their connections are modeled using the OF graph bindings specified in + Documentation/devicetree/bindings/graph.txt. + +- video port 0 for the VOP input, the remote endpoint maybe vopb or vopl +- video port 1 for either a panel or subsequent encoder + +Example: + +lvds_panel: lvds-panel { + compatible = "auo,b101ean01"; + enable-gpios = <&gpio7 21 GPIO_ACTIVE_HIGH>; + data-mapping = "jeida-24"; + + ports { + panel_in_lvds: endpoint { + remote-endpoint = <&lvds_out_panel>; + }; + }; +}; + +For Rockchip RK3288: + + lvds: lvds@ff96c000 { + compatible = "rockchip,rk3288-lvds"; + rockchip,grf = <&grf>; + reg = <0xff96c000 0x4000>; + clocks = <&cru PCLK_LVDS_PHY>; + clock-names = "pclk_lvds"; + pinctrl-names = "lcdc"; + pinctrl-0 = <&lcdc_ctl>; + avdd1v0-supply = <&vdd10_lcd>; + avdd1v8-supply = <&vcc18_lcd>; + avdd3v3-supply = <&vcca_33>; + rockchip,output = "rgb"; + ports { + #address-cells = <1>; + #size-cells = <0>; + + lvds_in: port@0 { + reg = <0>; + + lvds_in_vopb: endpoint@0 { + reg = <0>; + remote-endpoint = <&vopb_out_lvds>; + }; + lvds_in_vopl: endpoint@1 { + reg = <1>; + remote-endpoint = <&vopl_out_lvds>; + }; + }; + + lvds_out: port@1 { + reg = <1>; + + lvds_out_panel: endpoint { + remote-endpoint = <&panel_in_lvds>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml new file mode 100644 index 000000000..ed8148e26 --- /dev/null +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml @@ -0,0 +1,134 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/rockchip/rockchip-vop.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip SoC display controller (VOP) + +description: + VOP (Video Output Processor) is the display controller for the Rockchip + series of SoCs which transfers the image data from a video memory + buffer to an external LCD interface. + +maintainers: + - Sandy Huang <hjc@rock-chips.com> + - Heiko Stuebner <heiko@sntech.de> + +properties: + compatible: + enum: + - rockchip,px30-vop-big + - rockchip,px30-vop-lit + - rockchip,rk3036-vop + - rockchip,rk3066-vop + - rockchip,rk3126-vop + - rockchip,rk3188-vop + - rockchip,rk3228-vop + - rockchip,rk3288-vop + - rockchip,rk3328-vop + - rockchip,rk3366-vop + - rockchip,rk3368-vop + - rockchip,rk3399-vop-big + - rockchip,rk3399-vop-lit + + reg: + minItems: 1 + items: + - description: + Must contain one entry corresponding to the base address and length + of the register space. + - description: + Can optionally contain a second entry corresponding to + the CRTC gamma LUT address. + + interrupts: + maxItems: 1 + description: + The VOP interrupt is shared by several interrupt sources, such as + frame start (VSYNC), line flag and other status interrupts. + + clocks: + items: + - description: Clock for ddr buffer transfer. + - description: Pixel clock. + - description: Clock for the ahb bus to R/W the phy regs. + + clock-names: + items: + - const: aclk_vop + - const: dclk_vop + - const: hclk_vop + + resets: + maxItems: 3 + + reset-names: + items: + - const: axi + - const: ahb + - const: dclk + + port: + type: object + description: + A port node with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + + assigned-clocks: + maxItems: 2 + + assigned-clock-rates: + maxItems: 2 + + iommus: + maxItems: 1 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + - reset-names + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/rk3288-cru.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/rk3288-power.h> + vopb: vopb@ff930000 { + compatible = "rockchip,rk3288-vop"; + reg = <0xff930000 0x19c>, + <0xff931000 0x1000>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_VOP0>, + <&cru DCLK_VOP0>, + <&cru HCLK_VOP0>; + clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; + power-domains = <&power RK3288_PD_VIO>; + resets = <&cru SRST_LCDC1_AXI>, + <&cru SRST_LCDC1_AHB>, + <&cru SRST_LCDC1_DCLK>; + reset-names = "axi", "ahb", "dclk"; + iommus = <&vopb_mmu>; + vopb_out: port { + #address-cells = <1>; + #size-cells = <0>; + vopb_out_edp: endpoint@0 { + reg = <0>; + remote-endpoint=<&edp_in_vopb>; + }; + vopb_out_hdmi: endpoint@1 { + reg = <1>; + remote-endpoint=<&hdmi_in_vopb>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/simple-framebuffer.yaml b/Documentation/devicetree/bindings/display/simple-framebuffer.yaml new file mode 100644 index 000000000..eaf8c54fc --- /dev/null +++ b/Documentation/devicetree/bindings/display/simple-framebuffer.yaml @@ -0,0 +1,179 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/simple-framebuffer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Simple Framebuffer Device Tree Bindings + +maintainers: + - Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> + - Hans de Goede <hdegoede@redhat.com> + +description: |+ + A simple frame-buffer describes a frame-buffer setup by firmware or + the bootloader, with the assumption that the display hardware has + already been set up to scan out from the memory pointed to by the + reg property. + + Since simplefb nodes represent runtime information they must be + sub-nodes of the chosen node (*). Simplefb nodes must be named + framebuffer@<address>. + + If the devicetree contains nodes for the display hardware used by a + simplefb, then the simplefb node must contain a property called + display, which contains a phandle pointing to the primary display + hw node, so that the OS knows which simplefb to disable when handing + over control to a driver for the real hardware. The bindings for the + hw nodes must specify which node is considered the primary node. + + It is advised to add display# aliases to help the OS determine how + to number things. If display# aliases are used, then if the simplefb + node contains a display property then the /aliases/display# path + must point to the display hw node the display property points to, + otherwise it must point directly to the simplefb node. + + If a simplefb node represents the preferred console for user + interaction, then the chosen node stdout-path property should point + to it, or to the primary display hw node, as with display# + aliases. If display aliases are used then it should be set to the + alias instead. + + It is advised that devicetree files contain pre-filled, disabled + framebuffer nodes, so that the firmware only needs to update the + mode information and enable them. This way if e.g. later on support + for more display clocks get added, the simplefb nodes will already + contain this info and the firmware does not need to be updated. + + If pre-filled framebuffer nodes are used, the firmware may need + extra information to find the right node. In that case an extra + platform specific compatible and platform specific properties should + be used and documented. + +properties: + compatible: + items: + - enum: + - allwinner,simple-framebuffer + - amlogic,simple-framebuffer + - const: simple-framebuffer + + reg: + description: Location and size of the framebuffer memory + + clocks: + description: List of clocks used by the framebuffer. + + power-domains: + description: List of power domains used by the framebuffer. + + width: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Width of the framebuffer in pixels + + height: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Height of the framebuffer in pixels + + stride: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Number of bytes of a line in the framebuffer + + format: + description: > + Format of the framebuffer: + * `a8b8g8r8` - 32-bit pixels, d[31:24]=a, d[23:16]=b, d[15:8]=g, d[7:0]=r + * `r5g6b5` - 16-bit pixels, d[15:11]=r, d[10:5]=g, d[4:0]=b + enum: + - a8b8g8r8 + - r5g6b5 + + display: + $ref: /schemas/types.yaml#/definitions/phandle + description: Primary display hardware node + + allwinner,pipeline: + description: Pipeline used by the framebuffer on Allwinner SoCs + enum: + - de_be0-lcd0 + - de_be0-lcd0-hdmi + - de_be0-lcd0-tve0 + - de_be1-lcd0 + - de_be1-lcd1-hdmi + - de_fe0-de_be0-lcd0 + - de_fe0-de_be0-lcd0-hdmi + - de_fe0-de_be0-lcd0-tve0 + - mixer0-lcd0 + - mixer0-lcd0-hdmi + - mixer1-lcd1-hdmi + - mixer1-lcd1-tve + + amlogic,pipeline: + description: Pipeline used by the framebuffer on Amlogic SoCs + enum: + - vpu-cvbs + - vpu-hdmi + +patternProperties: + "^[a-zA-Z0-9-]+-supply$": + $ref: /schemas/types.yaml#/definitions/phandle + description: + Regulators used by the framebuffer. These should be named + according to the names in the device design. + +required: + # The binding requires also reg, width, height, stride and format, + # but usually they will be filled by the bootloader. + - compatible + +allOf: + - if: + properties: + compatible: + contains: + const: allwinner,simple-framebuffer + + then: + required: + - allwinner,pipeline + + - if: + properties: + compatible: + contains: + const: amlogic,simple-framebuffer + + then: + required: + - amlogic,pipeline + + +additionalProperties: false + +examples: + - | + / { + compatible = "foo"; + model = "foo"; + #address-cells = <1>; + #size-cells = <1>; + + chosen { + #address-cells = <1>; + #size-cells = <1>; + framebuffer0: framebuffer@1d385000 { + compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; + allwinner,pipeline = "de_be0-lcd0"; + reg = <0x1d385000 3840000>; + width = <1600>; + height = <1200>; + stride = <3200>; + format = "r5g6b5"; + clocks = <&ahb_gates 36>, <&ahb_gates 43>, <&ahb_gates 44>; + lcd-supply = <®_dc1sw>; + display = <&lcdc0>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/sitronix,st7586.txt b/Documentation/devicetree/bindings/display/sitronix,st7586.txt new file mode 100644 index 000000000..1d0dad121 --- /dev/null +++ b/Documentation/devicetree/bindings/display/sitronix,st7586.txt @@ -0,0 +1,22 @@ +Sitronix ST7586 display panel + +Required properties: +- compatible: "lego,ev3-lcd". +- a0-gpios: The A0 signal (since this binding is for serial mode, this is + the pin labeled D1 on the controller, not the pin labeled A0) +- reset-gpios: Reset pin + +The node for this driver must be a child node of a SPI controller, hence +all mandatory properties described in ../spi/spi-bus.txt must be specified. + +Optional properties: +- rotation: panel rotation in degrees counter clockwise (0,90,180,270) + +Example: + display@0{ + compatible = "lego,ev3-lcd"; + reg = <0>; + spi-max-frequency = <10000000>; + a0-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/display/sitronix,st7735r.yaml b/Documentation/devicetree/bindings/display/sitronix,st7735r.yaml new file mode 100644 index 000000000..419c3b2ac --- /dev/null +++ b/Documentation/devicetree/bindings/display/sitronix,st7735r.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/sitronix,st7735r.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sitronix ST7735R Display Panels Device Tree Bindings + +maintainers: + - David Lechner <david@lechnology.com> + +description: + This binding is for display panels using a Sitronix ST7715R or ST7735R + controller in SPI mode. + +allOf: + - $ref: panel/panel-common.yaml# + +properties: + compatible: + oneOf: + - description: + Adafruit 1.8" 160x128 Color TFT LCD (Product ID 358 or 618) + items: + - enum: + - jianda,jd-t18003-t01 + - const: sitronix,st7735r + - description: + Okaya 1.44" 128x128 Color TFT LCD (E.g. Renesas YRSK-LCD-PMOD) + items: + - enum: + - okaya,rh128128t + - const: sitronix,st7715r + + spi-max-frequency: + maximum: 32000000 + + dc-gpios: + maxItems: 1 + description: Display data/command selection (D/CX) + + backlight: true + reg: true + reset-gpios: true + rotation: true + +required: + - compatible + - reg + - dc-gpios + - reset-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + backlight: backlight { + compatible = "gpio-backlight"; + gpios = <&gpio 44 GPIO_ACTIVE_HIGH>; + }; + + spi { + #address-cells = <1>; + #size-cells = <0>; + + display@0{ + compatible = "jianda,jd-t18003-t01", "sitronix,st7735r"; + reg = <0>; + spi-max-frequency = <32000000>; + dc-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>; + rotation = <270>; + backlight = <&backlight>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/sm501fb.txt b/Documentation/devicetree/bindings/display/sm501fb.txt new file mode 100644 index 000000000..1c79c267a --- /dev/null +++ b/Documentation/devicetree/bindings/display/sm501fb.txt @@ -0,0 +1,32 @@ +* SM SM501 + +The SM SM501 is a LCD controller, with proper hardware, it can also +drive DVI monitors. + +Required properties: +- compatible : should be "smi,sm501". +- reg : contain two entries: + - First entry: System Configuration register + - Second entry: IO space (Display Controller register) +- interrupts : SMI interrupt to the cpu should be described here. + +Optional properties: +- mode : select a video mode: + <xres>x<yres>[-<bpp>][@<refresh>] +- edid : verbatim EDID data block describing attached display. + Data from the detailed timing descriptor will be used to + program the display controller. +- little-endian: available on big endian systems, to + set different foreign endian. +- big-endian: available on little endian systems, to + set different foreign endian. + +Example for MPC5200: + display@1,0 { + compatible = "smi,sm501"; + reg = <1 0x00000000 0x00800000 + 1 0x03e00000 0x00200000>; + interrupts = <1 1 3>; + mode = "640x480-32@60"; + edid = [edid-data]; + }; diff --git a/Documentation/devicetree/bindings/display/snps,arcpgu.txt b/Documentation/devicetree/bindings/display/snps,arcpgu.txt new file mode 100644 index 000000000..c5c7dfd37 --- /dev/null +++ b/Documentation/devicetree/bindings/display/snps,arcpgu.txt @@ -0,0 +1,35 @@ +ARC PGU + +This is a display controller found on several development boards produced +by Synopsys. The ARC PGU is an RGB streamer that reads the data from a +framebuffer and sends it to a single digital encoder (usually HDMI). + +Required properties: + - compatible: "snps,arcpgu" + - reg: Physical base address and length of the controller's registers. + - clocks: A list of phandle + clock-specifier pairs, one for each + entry in 'clock-names'. + - clock-names: A list of clock names. For ARC PGU it should contain: + - "pxlclk" for the clock feeding the output PLL of the controller. + +Required sub-nodes: + - port: The PGU connection to an encoder chip. + +Example: + +/ { + ... + + pgu@XXXXXXXX { + compatible = "snps,arcpgu"; + reg = <0xXXXXXXXX 0x400>; + clocks = <&clock_node>; + clock-names = "pxlclk"; + + port { + pgu_output: endpoint { + remote-endpoint = <&hdmi_enc_input>; + }; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/display/ssd1289fb.txt b/Documentation/devicetree/bindings/display/ssd1289fb.txt new file mode 100644 index 000000000..4fcd5e68c --- /dev/null +++ b/Documentation/devicetree/bindings/display/ssd1289fb.txt @@ -0,0 +1,13 @@ +* Solomon SSD1289 Framebuffer Driver + +Required properties: + - compatible: Should be "solomon,ssd1289fb". The only supported bus for + now is lbc. + - reg: Should contain address of the controller on the LBC bus. The detail + was described in Documentation/devicetree/bindings/powerpc/fsl/lbc.txt + +Examples: +display@2,0 { + compatible = "solomon,ssd1289fb"; + reg = <0x2 0x0000 0x0004>; +}; diff --git a/Documentation/devicetree/bindings/display/ssd1307fb.txt b/Documentation/devicetree/bindings/display/ssd1307fb.txt new file mode 100644 index 000000000..2dcb6d12d --- /dev/null +++ b/Documentation/devicetree/bindings/display/ssd1307fb.txt @@ -0,0 +1,60 @@ +* Solomon SSD1307 Framebuffer Driver + +Required properties: + - compatible: Should be "solomon,<chip>fb-<bus>". The only supported bus for + now is i2c, and the supported chips are ssd1305, ssd1306, ssd1307 and + ssd1309. + - reg: Should contain address of the controller on the I2C bus. Most likely + 0x3c or 0x3d + - pwm: Should contain the pwm to use according to the OF device tree PWM + specification [0]. Only required for the ssd1307. + - solomon,height: Height in pixel of the screen driven by the controller + - solomon,width: Width in pixel of the screen driven by the controller + - solomon,page-offset: Offset of pages (band of 8 pixels) that the screen is + mapped to. + +Optional properties: + - reset-gpios: The GPIO used to reset the OLED display, if available. See + Documentation/devicetree/bindings/gpio/gpio.txt for details. + - vbat-supply: The supply for VBAT + - solomon,segment-no-remap: Display needs normal (non-inverted) data column + to segment mapping + - solomon,col-offset: Offset of columns (COL/SEG) that the screen is mapped to. + - solomon,com-seq: Display uses sequential COM pin configuration + - solomon,com-lrremap: Display uses left-right COM pin remap + - solomon,com-invdir: Display uses inverted COM pin scan direction + - solomon,com-offset: Number of the COM pin wired to the first display line + - solomon,prechargep1: Length of deselect period (phase 1) in clock cycles. + - solomon,prechargep2: Length of precharge period (phase 2) in clock cycles. + This needs to be the higher, the higher the capacitance + of the OLED's pixels is + - solomon,dclk-div: Clock divisor 1 to 16 + - solomon,dclk-frq: Clock frequency 0 to 15, higher value means higher + frequency + - solomon,lookup-table: 8 bit value array of current drive pulse widths for + BANK0, and colors A, B, and C. Each value in range + of 31 to 63 for pulse widths of 32 to 64. Color D + is always width 64. + - solomon,area-color-enable: Display uses color mode + - solomon,low-power. Display runs in low power mode + +[0]: Documentation/devicetree/bindings/pwm/pwm.txt + +Examples: +ssd1307: oled@3c { + compatible = "solomon,ssd1307fb-i2c"; + reg = <0x3c>; + pwms = <&pwm 4 3000>; + reset-gpios = <&gpio2 7>; +}; + +ssd1306: oled@3c { + compatible = "solomon,ssd1306fb-i2c"; + reg = <0x3c>; + pwms = <&pwm 4 3000>; + reset-gpios = <&gpio2 7>; + solomon,com-lrremap; + solomon,com-invdir; + solomon,com-offset = <32>; + solomon,lookup-table = /bits/ 8 <0x3f 0x3f 0x3f 0x3f>; +}; diff --git a/Documentation/devicetree/bindings/display/st,stih4xx.txt b/Documentation/devicetree/bindings/display/st,stih4xx.txt new file mode 100644 index 000000000..6778b3e7a --- /dev/null +++ b/Documentation/devicetree/bindings/display/st,stih4xx.txt @@ -0,0 +1,241 @@ +STMicroelectronics stih4xx platforms + +- sti-vtg: video timing generator + Required properties: + - compatible: "st,vtg" + - reg: Physical base address of the IP registers and length of memory mapped region. + Optional properties: + - interrupts : VTG interrupt number to the CPU. + - st,slave: phandle on a slave vtg + +- sti-vtac: video timing advanced inter dye communication Rx and TX + Required properties: + - compatible: "st,vtac-main" or "st,vtac-aux" + - reg: Physical base address of the IP registers and length of memory mapped region. + - clocks: from common clock binding: handle hardware IP needed clocks, the + number of clocks may depend of the SoC type. + See ../clocks/clock-bindings.txt for details. + - clock-names: names of the clocks listed in clocks property in the same + order. + +- sti-display-subsystem: Master device for DRM sub-components + This device must be the parent of all the sub-components and is responsible + of bind them. + Required properties: + - compatible: "st,sti-display-subsystem" + - ranges: to allow probing of subdevices + +- sti-compositor: frame compositor engine + must be a child of sti-display-subsystem + Required properties: + - compatible: "st,stih<chip>-compositor" + - reg: Physical base address of the IP registers and length of memory mapped region. + - clocks: from common clock binding: handle hardware IP needed clocks, the + number of clocks may depend of the SoC type. + See ../clocks/clock-bindings.txt for details. + - clock-names: names of the clocks listed in clocks property in the same + order. + - resets: resets to be used by the device + See ../reset/reset.txt for details. + - reset-names: names of the resets listed in resets property in the same + order. + - st,vtg: phandle(s) on vtg device (main and aux) nodes. + +- sti-tvout: video out hardware block + must be a child of sti-display-subsystem + Required properties: + - compatible: "st,stih<chip>-tvout" + - reg: Physical base address of the IP registers and length of memory mapped region. + - reg-names: names of the mapped memory regions listed in regs property in + the same order. + - resets: resets to be used by the device + See ../reset/reset.txt for details. + - reset-names: names of the resets listed in resets property in the same + order. + +- sti-hdmi: hdmi output block + must be a child of sti-display-subsystem + Required properties: + - compatible: "st,stih<chip>-hdmi"; + - reg: Physical base address of the IP registers and length of memory mapped region. + - reg-names: names of the mapped memory regions listed in regs property in + the same order. + - interrupts : HDMI interrupt number to the CPU. + - interrupt-names: names of the interrupts listed in interrupts property in + the same order + - clocks: from common clock binding: handle hardware IP needed clocks, the + number of clocks may depend of the SoC type. + - clock-names: names of the clocks listed in clocks property in the same + order. + - ddc: phandle of an I2C controller used for DDC EDID probing + +sti-hda: + Required properties: + must be a child of sti-display-subsystem + - compatible: "st,stih<chip>-hda" + - reg: Physical base address of the IP registers and length of memory mapped region. + - reg-names: names of the mapped memory regions listed in regs property in + the same order. + - clocks: from common clock binding: handle hardware IP needed clocks, the + number of clocks may depend of the SoC type. + See ../clocks/clock-bindings.txt for details. + - clock-names: names of the clocks listed in clocks property in the same + order. + +sti-dvo: + Required properties: + must be a child of sti-display-subsystem + - compatible: "st,stih<chip>-dvo" + - reg: Physical base address of the IP registers and length of memory mapped region. + - reg-names: names of the mapped memory regions listed in regs property in + the same order. + - clocks: from common clock binding: handle hardware IP needed clocks, the + number of clocks may depend of the SoC type. + See ../clocks/clock-bindings.txt for details. + - clock-names: names of the clocks listed in clocks property in the same + order. + - pinctrl-0: pin control handle + - pinctrl-names: names of the pin control states to use + - sti,panel: phandle of the panel connected to the DVO output + +sti-hqvdp: + must be a child of sti-display-subsystem + Required properties: + - compatible: "st,stih<chip>-hqvdp" + - reg: Physical base address of the IP registers and length of memory mapped region. + - clocks: from common clock binding: handle hardware IP needed clocks, the + number of clocks may depend of the SoC type. + See ../clocks/clock-bindings.txt for details. + - clock-names: names of the clocks listed in clocks property in the same + order. + - resets: resets to be used by the device + See ../reset/reset.txt for details. + - reset-names: names of the resets listed in resets property in the same + order. + - st,vtg: phandle on vtg main device node. + +Example: + +/ { + ... + + vtg_main_slave: sti-vtg-main-slave@fe85a800 { + compatible = "st,vtg"; + reg = <0xfe85A800 0x300>; + interrupts = <GIC_SPI 175 IRQ_TYPE_NONE>; + }; + + vtg_main: sti-vtg-main-master@fd348000 { + compatible = "st,vtg"; + reg = <0xfd348000 0x400>; + st,slave = <&vtg_main_slave>; + }; + + vtg_aux_slave: sti-vtg-aux-slave@fd348400 { + compatible = "st,vtg"; + reg = <0xfe858200 0x300>; + interrupts = <GIC_SPI 176 IRQ_TYPE_NONE>; + }; + + vtg_aux: sti-vtg-aux-master@fd348400 { + compatible = "st,vtg"; + reg = <0xfd348400 0x400>; + st,slave = <&vtg_aux_slave>; + }; + + + sti-vtac-rx-main@fee82800 { + compatible = "st,vtac-main"; + reg = <0xfee82800 0x200>; + clock-names = "vtac"; + clocks = <&clk_m_a2_div0 CLK_M_VTAC_MAIN_PHY>; + }; + + sti-vtac-rx-aux@fee82a00 { + compatible = "st,vtac-aux"; + reg = <0xfee82a00 0x200>; + clock-names = "vtac"; + clocks = <&clk_m_a2_div0 CLK_M_VTAC_AUX_PHY>; + }; + + sti-vtac-tx-main@fd349000 { + compatible = "st,vtac-main"; + reg = <0xfd349000 0x200>, <0xfd320000 0x10000>; + clock-names = "vtac"; + clocks = <&clk_s_a1_hs CLK_S_VTAC_TX_PHY>; + }; + + sti-vtac-tx-aux@fd349200 { + compatible = "st,vtac-aux"; + reg = <0xfd349200 0x200>, <0xfd320000 0x10000>; + clock-names = "vtac"; + clocks = <&clk_s_a1_hs CLK_S_VTAC_TX_PHY>; + }; + + sti-display-subsystem { + compatible = "st,sti-display-subsystem"; + ranges; + + sti-compositor@fd340000 { + compatible = "st,stih416-compositor"; + reg = <0xfd340000 0x1000>; + clock-names = "compo_main", "compo_aux", + "pix_main", "pix_aux"; + clocks = <&clk_m_a2_div1 CLK_M_COMPO_MAIN>, <&clk_m_a2_div1 CLK_M_COMPO_AUX>, + <&clockgen_c_vcc CLK_S_PIX_MAIN>, <&clockgen_c_vcc CLK_S_PIX_AUX>; + reset-names = "compo-main", "compo-aux"; + resets = <&softreset STIH416_COMPO_M_SOFTRESET>, <&softreset STIH416_COMPO_A_SOFTRESET>; + st,vtg = <&vtg_main>, <&vtg_aux>; + }; + + sti-tvout@fe000000 { + compatible = "st,stih416-tvout"; + reg = <0xfe000000 0x1000>, <0xfe85a000 0x400>, <0xfe830000 0x10000>; + reg-names = "tvout-reg", "hda-reg", "syscfg"; + reset-names = "tvout"; + resets = <&softreset STIH416_HDTVOUT_SOFTRESET>; + }; + + sti-hdmi@fe85c000 { + compatible = "st,stih416-hdmi"; + reg = <0xfe85c000 0x1000>, <0xfe830000 0x10000>; + reg-names = "hdmi-reg", "syscfg"; + interrupts = <GIC_SPI 173 IRQ_TYPE_NONE>; + interrupt-names = "irq"; + clock-names = "pix", "tmds", "phy", "audio"; + clocks = <&clockgen_c_vcc CLK_S_PIX_HDMI>, <&clockgen_c_vcc CLK_S_TMDS_HDMI>, <&clockgen_c_vcc CLK_S_HDMI_REJECT_PLL>, <&clockgen_b1 CLK_S_PCM_0>; + }; + + sti-hda@fe85a000 { + compatible = "st,stih416-hda"; + reg = <0xfe85a000 0x400>, <0xfe83085c 0x4>; + reg-names = "hda-reg", "video-dacs-ctrl"; + clock-names = "pix", "hddac"; + clocks = <&clockgen_c_vcc CLK_S_PIX_HD>, <&clockgen_c_vcc CLK_S_HDDAC>; + }; + + sti-dvo@8d00400 { + compatible = "st,stih407-dvo"; + reg = <0x8d00400 0x200>; + reg-names = "dvo-reg"; + clock-names = "dvo_pix", "dvo", + "main_parent", "aux_parent"; + clocks = <&clk_s_d2_flexgen CLK_PIX_DVO>, <&clk_s_d2_flexgen CLK_DVO>, + <&clk_s_d2_quadfs 0>, <&clk_s_d2_quadfs 1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dvo>; + sti,panel = <&panel_dvo>; + }; + + sti-hqvdp@9c000000 { + compatible = "st,stih407-hqvdp"; + reg = <0x9C00000 0x100000>; + clock-names = "hqvdp", "pix_main"; + clocks = <&clk_s_c0_flexgen CLK_MAIN_DISP>, <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>; + reset-names = "hqvdp"; + resets = <&softreset STIH407_HDQVDP_SOFTRESET>; + st,vtg = <&vtg_main>; + }; + }; + ... +}; diff --git a/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml b/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml new file mode 100644 index 000000000..327a14d85 --- /dev/null +++ b/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml @@ -0,0 +1,134 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/st,stm32-dsi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STM32 DSI host controller + +maintainers: + - Philippe Cornu <philippe.cornu@st.com> + - Yannick Fertre <yannick.fertre@st.com> + +description: + The STMicroelectronics STM32 DSI controller uses the Synopsys DesignWare MIPI-DSI host controller. + +allOf: + - $ref: dsi-controller.yaml# + +properties: + compatible: + const: st,stm32-dsi + + reg: + maxItems: 1 + + clocks: + items: + - description: Module Clock + - description: DSI bus clock + - description: Pixel clock + minItems: 2 + maxItems: 3 + + clock-names: + items: + - const: pclk + - const: ref + - const: px_clk + minItems: 2 + maxItems: 3 + + resets: + maxItems: 1 + + reset-names: + items: + - const: apb + + phy-dsi-supply: + description: + Phandle of the regulator that provides the supply voltage. + + ports: + type: object + description: + A node containing DSI input & output port nodes with endpoint + definitions as documented in + Documentation/devicetree/bindings/media/video-interfaces.txt + Documentation/devicetree/bindings/graph.txt + properties: + port@0: + type: object + description: + DSI input port node, connected to the ltdc rgb output port. + + port@1: + type: object + description: + DSI output port node, connected to a panel or a bridge input port" + +required: + - "#address-cells" + - "#size-cells" + - compatible + - reg + - clocks + - clock-names + - ports + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/stm32mp1-clks.h> + #include <dt-bindings/reset/stm32mp1-resets.h> + #include <dt-bindings/gpio/gpio.h> + dsi: dsi@5a000000 { + compatible = "st,stm32-dsi"; + reg = <0x5a000000 0x800>; + clocks = <&rcc DSI_K>, <&clk_hse>, <&rcc DSI_PX>; + clock-names = "pclk", "ref", "px_clk"; + resets = <&rcc DSI_R>; + reset-names = "apb"; + phy-dsi-supply = <®18>; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi_in: endpoint { + remote-endpoint = <<dc_ep1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + + panel-dsi@0 { + compatible = "orisetech,otm8009a"; + reg = <0>; + reset-gpios = <&gpioe 4 GPIO_ACTIVE_LOW>; + power-supply = <&v3v3>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; + }; + +... + diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml b/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml new file mode 100644 index 000000000..bf8ad916e --- /dev/null +++ b/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/st,stm32-ltdc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STM32 lcd-tft display controller + +maintainers: + - Philippe Cornu <philippe.cornu@st.com> + - Yannick Fertre <yannick.fertre@st.com> + +properties: + compatible: + const: st,stm32-ltdc + + reg: + maxItems: 1 + + interrupts: + items: + - description: events interrupt line. + - description: errors interrupt line. + minItems: 1 + maxItems: 2 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: lcd + + resets: + maxItems: 1 + + port: + type: object + description: + "Video port for DPI RGB output. + ltdc has one video port with up to 2 endpoints: + - for external dpi rgb panel or bridge, using gpios. + - for internal dpi input of the MIPI DSI host controller. + Note: These 2 endpoints cannot be activated simultaneously. + Please refer to the bindings defined in + Documentation/devicetree/bindings/media/video-interfaces.txt." + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/stm32mp1-clks.h> + #include <dt-bindings/reset/stm32mp1-resets.h> + ltdc: display-controller@40016800 { + compatible = "st,stm32-ltdc"; + reg = <0x5a001000 0x400>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc LTDC_PX>; + clock-names = "lcd"; + resets = <&rcc LTDC_R>; + + port { + ltdc_out_dsi: endpoint { + remote-endpoint = <&dsi_in>; + }; + }; + }; + +... + diff --git a/Documentation/devicetree/bindings/display/ste,mcde.txt b/Documentation/devicetree/bindings/display/ste,mcde.txt new file mode 100644 index 000000000..4c33c692b --- /dev/null +++ b/Documentation/devicetree/bindings/display/ste,mcde.txt @@ -0,0 +1,104 @@ +ST-Ericsson Multi Channel Display Engine MCDE + +The ST-Ericsson MCDE is a display controller with support for compositing +and displaying several channels memory resident graphics data on DSI or +LCD displays or bridges. It is used in the ST-Ericsson U8500 platform. + +Required properties: + +- compatible: must be: + "ste,mcde" +- reg: register base for the main MCDE control registers, should be + 0x1000 in size +- interrupts: the interrupt line for the MCDE +- epod-supply: a phandle to the EPOD regulator +- vana-supply: a phandle to the analog voltage regulator +- clocks: an array of the MCDE clocks in this strict order: + MCDECLK (main MCDE clock), LCDCLK (LCD clock), PLLDSI + (HDMI clock), DSI0ESCLK (DSI0 energy save clock), + DSI1ESCLK (DSI1 energy save clock), DSI2ESCLK (DSI2 energy + save clock) +- clock-names: must be the following array: + "mcde", "lcd", "hdmi" + to match the required clock inputs above. +- #address-cells: should be <1> (for the DSI hosts that will be children) +- #size-cells: should be <1> (for the DSI hosts that will be children) +- ranges: this should always be stated + +Required subnodes: + +The devicetree must specify subnodes for the DSI host adapters. +These must have the following characteristics: + +- compatible: must be: + "ste,mcde-dsi" +- reg: must specify the register range for the DSI host +- vana-supply: phandle to the VANA voltage regulator +- clocks: phandles to the high speed and low power (energy save) clocks + the high speed clock is not present on the third (dsi2) block, so it + should only have the "lp" clock +- clock-names: "hs" for the high speed clock and "lp" for the low power + (energy save) clock +- #address-cells: should be <1> +- #size-cells: should be <0> + +Display panels and bridges will appear as children on the DSI hosts, and +the displays are connected to the DSI hosts using the common binding +for video transmitter interfaces; see +Documentation/devicetree/bindings/media/video-interfaces.txt + +If a DSI host is unused (not connected) it will have no children defined. + +Example: + +mcde@a0350000 { + compatible = "ste,mcde"; + reg = <0xa0350000 0x1000>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + epod-supply = <&db8500_b2r2_mcde_reg>; + vana-supply = <&ab8500_ldo_ana_reg>; + clocks = <&prcmu_clk PRCMU_MCDECLK>, /* Main MCDE clock */ + <&prcmu_clk PRCMU_LCDCLK>, /* LCD clock */ + <&prcmu_clk PRCMU_PLLDSI>; /* HDMI clock */ + clock-names = "mcde", "lcd", "hdmi"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + dsi0: dsi@a0351000 { + compatible = "ste,mcde-dsi"; + reg = <0xa0351000 0x1000>; + vana-supply = <&ab8500_ldo_ana_reg>; + clocks = <&prcmu_clk PRCMU_DSI0CLK>, <&prcmu_clk PRCMU_DSI0ESCCLK>; + clock-names = "hs", "lp"; + #address-cells = <1>; + #size-cells = <0>; + + panel { + compatible = "samsung,s6d16d0"; + reg = <0>; + vdd1-supply = <&ab8500_ldo_aux1_reg>; + reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + }; + + }; + dsi1: dsi@a0352000 { + compatible = "ste,mcde-dsi"; + reg = <0xa0352000 0x1000>; + vana-supply = <&ab8500_ldo_ana_reg>; + clocks = <&prcmu_clk PRCMU_DSI1CLK>, <&prcmu_clk PRCMU_DSI1ESCCLK>; + clock-names = "hs", "lp"; + #address-cells = <1>; + #size-cells = <0>; + }; + dsi2: dsi@a0353000 { + compatible = "ste,mcde-dsi"; + reg = <0xa0353000 0x1000>; + vana-supply = <&ab8500_ldo_ana_reg>; + /* This DSI port only has the Low Power / Energy Save clock */ + clocks = <&prcmu_clk PRCMU_DSI2ESCCLK>; + clock-names = "lp"; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.txt b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.txt new file mode 100644 index 000000000..e4a25cedc --- /dev/null +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.txt @@ -0,0 +1,41 @@ +NVIDIA Tegra MIPI pad calibration controller + +Required properties: +- compatible: "nvidia,tegra<chip>-mipi" +- reg: Physical base address and length of the controller's registers. +- clocks: Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names: Must include the following entries: + - mipi-cal +- #nvidia,mipi-calibrate-cells: Should be 1. The cell is a bitmask of the pads + that need to be calibrated for a given device. + +User nodes need to contain an nvidia,mipi-calibrate property that has a +phandle to refer to the calibration controller node and a bitmask of the pads +that need to be calibrated. + +Example: + + mipi: mipi@700e3000 { + compatible = "nvidia,tegra114-mipi"; + reg = <0x700e3000 0x100>; + clocks = <&tegra_car TEGRA114_CLK_MIPI_CAL>; + clock-names = "mipi-cal"; + #nvidia,mipi-calibrate-cells = <1>; + }; + + ... + + host1x@50000000 { + ... + + dsi@54300000 { + ... + + nvidia,mipi-calibrate = <&mipi 0x060>; + + ... + }; + + ... + }; diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt new file mode 100644 index 000000000..ac63ae4a3 --- /dev/null +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt @@ -0,0 +1,554 @@ +NVIDIA Tegra host1x + +Required properties: +- compatible: "nvidia,tegra<chip>-host1x" +- reg: Physical base address and length of the controller's registers. + For pre-Tegra186, one entry describing the whole register area. + For Tegra186, one entry for each entry in reg-names: + "vm" - VM region assigned to Linux + "hypervisor" - Hypervisor region (only if Linux acts as hypervisor) +- interrupts: The interrupt outputs from the controller. +- #address-cells: The number of cells used to represent physical base addresses + in the host1x address space. Should be 1. +- #size-cells: The number of cells used to represent the size of an address + range in the host1x address space. Should be 1. +- ranges: The mapping of the host1x address space to the CPU address space. +- clocks: Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. +- resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names: Must include the following entries: + - host1x + +The host1x top-level node defines a number of children, each representing one +of the following host1x client modules: + +- mpe: video encoder + + Required properties: + - compatible: "nvidia,tegra<chip>-mpe" + - reg: Physical base address and length of the controller's registers. + - interrupts: The interrupt outputs from the controller. + - clocks: Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. + - resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names: Must include the following entries: + - mpe + +- vi: video input + + Required properties: + - compatible: "nvidia,tegra<chip>-vi" + - reg: Physical base address and length of the controller registers. + - interrupts: The interrupt outputs from the controller. + - clocks: clocks: Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. + - Tegra20/Tegra30/Tegra114/Tegra124: + - resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names: Must include the following entries: + - vi + - Tegra210: + - power-domains: Must include venc powergate node as vi is in VE partition. + + ports (optional node) + vi can have optional ports node and max 6 ports are supported. Each port + should have single 'endpoint' child node. All port nodes are grouped under + ports node. Please refer to the bindings defined in + Documentation/devicetree/bindings/media/video-interfaces.txt + + csi (required node) + Tegra210 has CSI part of VI sharing same host interface and register space. + So, VI device node should have CSI child node. + + - csi: mipi csi interface to vi + + Required properties: + - compatible: "nvidia,tegra210-csi" + - reg: Physical base address offset to parent and length of the controller + registers. + - clocks: Must contain entries csi, cilab, cilcd, cile, csi_tpg clocks. + See ../clocks/clock-bindings.txt for details. + - power-domains: Must include sor powergate node as csicil is in + SOR partition. + + channel (optional nodes) + Maximum 6 channels are supported with each csi brick as either x4 or x2 + based on hw connectivity to sensor. + + Required properties: + - reg: csi port number. Valid port numbers are 0 through 5. + - nvidia,mipi-calibrate: Should contain a phandle and a specifier + specifying which pads are used by this CSI port and need to be + calibrated. See also ../display/tegra/nvidia,tegra114-mipi.txt. + + Each channel node must contain 2 port nodes which can be grouped + under 'ports' node and each port should have a single child 'endpoint' + node. + + ports node + Please refer to the bindings defined in + Documentation/devicetree/bindings/media/video-interfaces.txt + + ports node must contain below 2 port nodes. + port@0 with single child 'endpoint' node always a sink. + port@1 with single child 'endpoint' node always a source. + + port@0 (required node) + Required properties: + - reg: 0 + + endpoint (required node) + Required properties: + - data-lanes: an array of data lane from 1 to 4. Valid array + lengths are 1/2/4. + - remote-endpoint: phandle to sensor 'endpoint' node. + + port@1 (required node) + Required properties: + - reg: 1 + + endpoint (required node) + Required properties: + - remote-endpoint: phandle to vi port 'endpoint' node. + +- epp: encoder pre-processor + + Required properties: + - compatible: "nvidia,tegra<chip>-epp" + - reg: Physical base address and length of the controller's registers. + - interrupts: The interrupt outputs from the controller. + - clocks: Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. + - resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names: Must include the following entries: + - epp + +- isp: image signal processor + + Required properties: + - compatible: "nvidia,tegra<chip>-isp" + - reg: Physical base address and length of the controller's registers. + - interrupts: The interrupt outputs from the controller. + - clocks: Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. + - resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names: Must include the following entries: + - isp + +- gr2d: 2D graphics engine + + Required properties: + - compatible: "nvidia,tegra<chip>-gr2d" + - reg: Physical base address and length of the controller's registers. + - interrupts: The interrupt outputs from the controller. + - clocks: Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. + - resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names: Must include the following entries: + - 2d + +- gr3d: 3D graphics engine + + Required properties: + - compatible: "nvidia,tegra<chip>-gr3d" + - reg: Physical base address and length of the controller's registers. + - clocks: Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. + - clock-names: Must include the following entries: + (This property may be omitted if the only clock in the list is "3d") + - 3d + This MUST be the first entry. + - 3d2 (Only required on SoCs with two 3D clocks) + - resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names: Must include the following entries: + - 3d + - 3d2 (Only required on SoCs with two 3D clocks) + +- dc: display controller + + Required properties: + - compatible: "nvidia,tegra<chip>-dc" + - reg: Physical base address and length of the controller's registers. + - interrupts: The interrupt outputs from the controller. + - clocks: Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. + - clock-names: Must include the following entries: + - dc + This MUST be the first entry. + - parent + - resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names: Must include the following entries: + - dc + - nvidia,head: The number of the display controller head. This is used to + setup the various types of output to receive video data from the given + head. + + Each display controller node has a child node, named "rgb", that represents + the RGB output associated with the controller. It can take the following + optional properties: + - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing + - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection + - nvidia,edid: supplies a binary EDID blob + - nvidia,panel: phandle of a display panel + +- hdmi: High Definition Multimedia Interface + + Required properties: + - compatible: "nvidia,tegra<chip>-hdmi" + - reg: Physical base address and length of the controller's registers. + - interrupts: The interrupt outputs from the controller. + - hdmi-supply: supply for the +5V HDMI connector pin + - vdd-supply: regulator for supply voltage + - pll-supply: regulator for PLL + - clocks: Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. + - clock-names: Must include the following entries: + - hdmi + This MUST be the first entry. + - parent + - resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names: Must include the following entries: + - hdmi + + Optional properties: + - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing + - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection + - nvidia,edid: supplies a binary EDID blob + - nvidia,panel: phandle of a display panel + +- tvo: TV encoder output + + Required properties: + - compatible: "nvidia,tegra<chip>-tvo" + - reg: Physical base address and length of the controller's registers. + - interrupts: The interrupt outputs from the controller. + - clocks: Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. + +- dsi: display serial interface + + Required properties: + - compatible: "nvidia,tegra<chip>-dsi" + - reg: Physical base address and length of the controller's registers. + - clocks: Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. + - clock-names: Must include the following entries: + - dsi + This MUST be the first entry. + - lp + - parent + - resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names: Must include the following entries: + - dsi + - avdd-dsi-supply: phandle of a supply that powers the DSI controller + - nvidia,mipi-calibrate: Should contain a phandle and a specifier specifying + which pads are used by this DSI output and need to be calibrated. See also + ../display/tegra/nvidia,tegra114-mipi.txt. + + Optional properties: + - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing + - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection + - nvidia,edid: supplies a binary EDID blob + - nvidia,panel: phandle of a display panel + - nvidia,ganged-mode: contains a phandle to a second DSI controller to gang + up with in order to support up to 8 data lanes + +- sor: serial output resource + + Required properties: + - compatible: Should be: + - "nvidia,tegra124-sor": for Tegra124 and Tegra132 + - "nvidia,tegra132-sor": for Tegra132 + - "nvidia,tegra210-sor": for Tegra210 + - "nvidia,tegra210-sor1": for Tegra210 + - "nvidia,tegra186-sor": for Tegra186 + - "nvidia,tegra186-sor1": for Tegra186 + - reg: Physical base address and length of the controller's registers. + - interrupts: The interrupt outputs from the controller. + - clocks: Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. + - clock-names: Must include the following entries: + - sor: clock input for the SOR hardware + - out: SOR output clock + - parent: input for the pixel clock + - dp: reference clock for the SOR clock + - safe: safe reference for the SOR clock during power up + + For Tegra186 and later: + - pad: SOR pad output clock (on Tegra186 and later) + + Obsolete: + - source: source clock for the SOR clock (obsolete, use "out" instead) + + - resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names: Must include the following entries: + - sor + + Required properties on Tegra186 and later: + - nvidia,interface: index of the SOR interface + + Optional properties: + - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing + - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection + - nvidia,edid: supplies a binary EDID blob + - nvidia,panel: phandle of a display panel + - nvidia,xbar-cfg: 5 cells containing the crossbar configuration. Each lane + of the SOR, identified by the cell's index, is mapped via the crossbar to + the pad specified by the cell's value. + + Optional properties when driving an eDP output: + - nvidia,dpaux: phandle to a DispayPort AUX interface + +- dpaux: DisplayPort AUX interface + - compatible : Should contain one of the following: + - "nvidia,tegra124-dpaux": for Tegra124 and Tegra132 + - "nvidia,tegra210-dpaux": for Tegra210 + - reg: Physical base address and length of the controller's registers. + - interrupts: The interrupt outputs from the controller. + - clocks: Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. + - clock-names: Must include the following entries: + - dpaux: clock input for the DPAUX hardware + - parent: reference clock + - resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names: Must include the following entries: + - dpaux + - vdd-supply: phandle of a supply that powers the DisplayPort link + - i2c-bus: Subnode where I2C slave devices are listed. This subnode + must be always present. If there are no I2C slave devices, an empty + node should be added. See ../../i2c/i2c.txt for more information. + + See ../pinctrl/nvidia,tegra124-dpaux-padctl.txt for information + regarding the DPAUX pad controller bindings. + +- vic: Video Image Compositor + - compatible : "nvidia,tegra<chip>-vic" + - reg: Physical base address and length of the controller's registers. + - interrupts: The interrupt outputs from the controller. + - clocks: Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. + - clock-names: Must include the following entries: + - vic: clock input for the VIC hardware + - resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names: Must include the following entries: + - vic + +Example: + +/ { + ... + + host1x { + compatible = "nvidia,tegra20-host1x", "simple-bus"; + reg = <0x50000000 0x00024000>; + interrupts = <0 65 0x04 /* mpcore syncpt */ + 0 67 0x04>; /* mpcore general */ + clocks = <&tegra_car TEGRA20_CLK_HOST1X>; + resets = <&tegra_car 28>; + reset-names = "host1x"; + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0x54000000 0x54000000 0x04000000>; + + mpe { + compatible = "nvidia,tegra20-mpe"; + reg = <0x54040000 0x00040000>; + interrupts = <0 68 0x04>; + clocks = <&tegra_car TEGRA20_CLK_MPE>; + resets = <&tegra_car 60>; + reset-names = "mpe"; + }; + + vi@54080000 { + compatible = "nvidia,tegra210-vi"; + reg = <0x0 0x54080000 0x0 0x700>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + assigned-clocks = <&tegra_car TEGRA210_CLK_VI>; + assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>; + + clocks = <&tegra_car TEGRA210_CLK_VI>; + power-domains = <&pd_venc>; + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0x0 0x0 0x54080000 0x2000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + imx219_vi_in0: endpoint { + remote-endpoint = <&imx219_csi_out0>; + }; + }; + }; + + csi@838 { + compatible = "nvidia,tegra210-csi"; + reg = <0x838 0x1300>; + assigned-clocks = <&tegra_car TEGRA210_CLK_CILAB>, + <&tegra_car TEGRA210_CLK_CILCD>, + <&tegra_car TEGRA210_CLK_CILE>, + <&tegra_car TEGRA210_CLK_CSI_TPG>; + assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_P>, + <&tegra_car TEGRA210_CLK_PLL_P>, + <&tegra_car TEGRA210_CLK_PLL_P>; + assigned-clock-rates = <102000000>, + <102000000>, + <102000000>, + <972000000>; + + clocks = <&tegra_car TEGRA210_CLK_CSI>, + <&tegra_car TEGRA210_CLK_CILAB>, + <&tegra_car TEGRA210_CLK_CILCD>, + <&tegra_car TEGRA210_CLK_CILE>, + <&tegra_car TEGRA210_CLK_CSI_TPG>; + clock-names = "csi", "cilab", "cilcd", "cile", "csi_tpg"; + power-domains = <&pd_sor>; + + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0>; + nvidia,mipi-calibrate = <&mipi 0x001>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + imx219_csi_in0: endpoint { + data-lanes = <1 2>; + remote-endpoint = <&imx219_out0>; + }; + }; + + port@1 { + reg = <1>; + imx219_csi_out0: endpoint { + remote-endpoint = <&imx219_vi_in0>; + }; + }; + }; + }; + }; + }; + + epp { + compatible = "nvidia,tegra20-epp"; + reg = <0x540c0000 0x00040000>; + interrupts = <0 70 0x04>; + clocks = <&tegra_car TEGRA20_CLK_EPP>; + resets = <&tegra_car 19>; + reset-names = "epp"; + }; + + isp { + compatible = "nvidia,tegra20-isp"; + reg = <0x54100000 0x00040000>; + interrupts = <0 71 0x04>; + clocks = <&tegra_car TEGRA20_CLK_ISP>; + resets = <&tegra_car 23>; + reset-names = "isp"; + }; + + gr2d { + compatible = "nvidia,tegra20-gr2d"; + reg = <0x54140000 0x00040000>; + interrupts = <0 72 0x04>; + clocks = <&tegra_car TEGRA20_CLK_GR2D>; + resets = <&tegra_car 21>; + reset-names = "2d"; + }; + + gr3d { + compatible = "nvidia,tegra20-gr3d"; + reg = <0x54180000 0x00040000>; + clocks = <&tegra_car TEGRA20_CLK_GR3D>; + resets = <&tegra_car 24>; + reset-names = "3d"; + }; + + dc@54200000 { + compatible = "nvidia,tegra20-dc"; + reg = <0x54200000 0x00040000>; + interrupts = <0 73 0x04>; + clocks = <&tegra_car TEGRA20_CLK_DISP1>, + <&tegra_car TEGRA20_CLK_PLL_P>; + clock-names = "dc", "parent"; + resets = <&tegra_car 27>; + reset-names = "dc"; + + rgb { + status = "disabled"; + }; + }; + + dc@54240000 { + compatible = "nvidia,tegra20-dc"; + reg = <0x54240000 0x00040000>; + interrupts = <0 74 0x04>; + clocks = <&tegra_car TEGRA20_CLK_DISP2>, + <&tegra_car TEGRA20_CLK_PLL_P>; + clock-names = "dc", "parent"; + resets = <&tegra_car 26>; + reset-names = "dc"; + + rgb { + status = "disabled"; + }; + }; + + hdmi { + compatible = "nvidia,tegra20-hdmi"; + reg = <0x54280000 0x00040000>; + interrupts = <0 75 0x04>; + clocks = <&tegra_car TEGRA20_CLK_HDMI>, + <&tegra_car TEGRA20_CLK_PLL_D_OUT0>; + clock-names = "hdmi", "parent"; + resets = <&tegra_car 51>; + reset-names = "hdmi"; + status = "disabled"; + }; + + tvo { + compatible = "nvidia,tegra20-tvo"; + reg = <0x542c0000 0x00040000>; + interrupts = <0 76 0x04>; + clocks = <&tegra_car TEGRA20_CLK_TVO>; + status = "disabled"; + }; + + dsi { + compatible = "nvidia,tegra20-dsi"; + reg = <0x54300000 0x00040000>; + clocks = <&tegra_car TEGRA20_CLK_DSI>, + <&tegra_car TEGRA20_CLK_PLL_D_OUT0>; + clock-names = "dsi", "parent"; + resets = <&tegra_car 48>; + reset-names = "dsi"; + status = "disabled"; + }; + }; + + ... +}; diff --git a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml new file mode 100644 index 000000000..4f9185462 --- /dev/null +++ b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml @@ -0,0 +1,151 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 Texas Instruments Incorporated +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/display/ti/ti,am65x-dss.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Texas Instruments AM65x Display Subsystem + +maintainers: + - Jyri Sarha <jsarha@ti.com> + - Tomi Valkeinen <tomi.valkeinen@ti.com> + +description: | + The AM65x TI Keystone Display SubSystem with two output ports and + two video planes. The first video port supports OLDI and the second + supports DPI format. The fist plane is full video plane with all + features and the second is a "lite plane" without scaling support. + +properties: + compatible: + const: ti,am65x-dss + + reg: + description: + Addresses to each DSS memory region described in the SoC's TRM. + items: + - description: common DSS register area + - description: VIDL1 light video plane + - description: VID video plane + - description: OVR1 overlay manager for vp1 + - description: OVR2 overlay manager for vp2 + - description: VP1 video port 1 + - description: VP2 video port 2 + + reg-names: + items: + - const: common + - const: vidl1 + - const: vid + - const: ovr1 + - const: ovr2 + - const: vp1 + - const: vp2 + + clocks: + items: + - description: fck DSS functional clock + - description: vp1 Video Port 1 pixel clock + - description: vp2 Video Port 2 pixel clock + + clock-names: + items: + - const: fck + - const: vp1 + - const: vp2 + + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + description: phandle to the associated power domain + + ports: + type: object + description: + Ports as described in Documentation/devicetree/bindings/graph.txt + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + port@0: + type: object + description: + The DSS OLDI output port node form video port 1 + + port@1: + type: object + description: + The DSS DPI output port node from video port 2 + + required: + - "#address-cells" + - "#size-cells" + + ti,am65x-oldi-io-ctrl: + $ref: "/schemas/types.yaml#/definitions/phandle-array" + maxItems: 1 + description: + phandle to syscon device node mapping OLDI IO_CTRL registers. + The mapped range should point to OLDI_DAT0_IO_CTRL, map it and + following OLDI_DAT1_IO_CTRL, OLDI_DAT2_IO_CTRL, OLDI_DAT3_IO_CTRL, + and OLDI_CLK_IO_CTRL registers. This property is needed for OLDI + interface to work. + + max-memory-bandwidth: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Input memory (from main memory to dispc) bandwidth limit in + bytes per second + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - interrupts + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/soc/ti,sci_pm_domain.h> + + dss: dss@4a00000 { + compatible = "ti,am65x-dss"; + reg = <0x04a00000 0x1000>, /* common */ + <0x04a02000 0x1000>, /* vidl1 */ + <0x04a06000 0x1000>, /* vid */ + <0x04a07000 0x1000>, /* ovr1 */ + <0x04a08000 0x1000>, /* ovr2 */ + <0x04a0a000 0x1000>, /* vp1 */ + <0x04a0b000 0x1000>; /* vp2 */ + reg-names = "common", "vidl1", "vid", + "ovr1", "ovr2", "vp1", "vp2"; + ti,am65x-oldi-io-ctrl = <&dss_oldi_io_ctrl>; + power-domains = <&k3_pds 67 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 67 1>, + <&k3_clks 216 1>, + <&k3_clks 67 2>; + clock-names = "fck", "vp1", "vp2"; + interrupts = <GIC_SPI 166 IRQ_TYPE_EDGE_RISING>; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + oldi_out0: endpoint { + remote-endpoint = <&lcd_in0>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/ti/ti,dra7-dss.txt b/Documentation/devicetree/bindings/display/ti/ti,dra7-dss.txt new file mode 100644 index 000000000..91279f106 --- /dev/null +++ b/Documentation/devicetree/bindings/display/ti/ti,dra7-dss.txt @@ -0,0 +1,74 @@ +Texas Instruments DRA7x Display Subsystem +========================================= + +See Documentation/devicetree/bindings/display/ti/ti,omap-dss.txt for generic +description about OMAP Display Subsystem bindings. + +DSS Core +-------- + +Required properties: +- compatible: "ti,dra7-dss" +- reg: address and length of the register spaces for 'dss' +- ti,hwmods: "dss_core" +- clocks: handle to fclk +- clock-names: "fck" +- syscon: phandle to control module core syscon node + +Optional properties: + +Some DRA7xx SoCs have one dedicated video PLL, some have two. These properties +can be used to describe the video PLLs: + +- reg: address and length of the register spaces for 'pll1_clkctrl', + 'pll1', 'pll2_clkctrl', 'pll2' +- clocks: handle to video1 pll clock and video2 pll clock +- clock-names: "video1_clk" and "video2_clk" + +Required nodes: +- DISPC + +Optional nodes: +- DSS Submodules: HDMI +- Video port for DPI output + +DPI Endpoint required properties: +- data-lines: number of lines used + + +DISPC +----- + +Required properties: +- compatible: "ti,dra7-dispc" +- reg: address and length of the register space +- ti,hwmods: "dss_dispc" +- interrupts: the DISPC interrupt +- clocks: handle to fclk +- clock-names: "fck" + +Optional properties: +- max-memory-bandwidth: Input memory (from main memory to dispc) bandwidth limit + in bytes per second + + +HDMI +---- + +Required properties: +- compatible: "ti,dra7-hdmi" +- reg: addresses and lengths of the register spaces for 'wp', 'pll', 'phy', + 'core' +- reg-names: "wp", "pll", "phy", "core" +- interrupts: the HDMI interrupt line +- ti,hwmods: "dss_hdmi" +- vdda-supply: vdda power supply +- clocks: handles to fclk and pll clock +- clock-names: "fck", "sys_clk" + +Optional nodes: +- Video port for HDMI output + +HDMI Endpoint optional properties: +- lanes: list of 8 pin numbers for the HDMI lanes: CLK+, CLK-, D0+, D0-, + D1+, D1-, D2+, D2-. (default: 0,1,2,3,4,5,6,7) diff --git a/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml new file mode 100644 index 000000000..173730d56 --- /dev/null +++ b/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml @@ -0,0 +1,208 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 Texas Instruments Incorporated +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/display/ti/ti,j721e-dss.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Texas Instruments J721E Display Subsystem + +maintainers: + - Jyri Sarha <jsarha@ti.com> + - Tomi Valkeinen <tomi.valkeinen@ti.com> + +description: | + The J721E TI Keystone Display SubSystem with four output ports and + four video planes. There is two full video planes and two "lite + planes" without scaling support. The video ports can be connected to + the SoC's DPI pins or to integrated display bridges on the SoC. + +properties: + compatible: + const: ti,j721e-dss + + reg: + items: + - description: common_m DSS Master common + - description: common_s0 DSS Shared common 0 + - description: common_s1 DSS Shared common 1 + - description: common_s2 DSS Shared common 2 + - description: VIDL1 light video plane 1 + - description: VIDL2 light video plane 2 + - description: VID1 video plane 1 + - description: VID1 video plane 2 + - description: OVR1 overlay manager for vp1 + - description: OVR2 overlay manager for vp2 + - description: OVR3 overlay manager for vp3 + - description: OVR4 overlay manager for vp4 + - description: VP1 video port 1 + - description: VP2 video port 2 + - description: VP3 video port 3 + - description: VP4 video port 4 + - description: WB Write Back + + reg-names: + items: + - const: common_m + - const: common_s0 + - const: common_s1 + - const: common_s2 + - const: vidl1 + - const: vidl2 + - const: vid1 + - const: vid2 + - const: ovr1 + - const: ovr2 + - const: ovr3 + - const: ovr4 + - const: vp1 + - const: vp2 + - const: vp3 + - const: vp4 + - const: wb + + clocks: + items: + - description: fck DSS functional clock + - description: vp1 Video Port 1 pixel clock + - description: vp2 Video Port 2 pixel clock + - description: vp3 Video Port 3 pixel clock + - description: vp4 Video Port 4 pixel clock + + clock-names: + items: + - const: fck + - const: vp1 + - const: vp2 + - const: vp3 + - const: vp4 + + interrupts: + items: + - description: common_m DSS Master common + - description: common_s0 DSS Shared common 0 + - description: common_s1 DSS Shared common 1 + - description: common_s2 DSS Shared common 2 + + interrupt-names: + items: + - const: common_m + - const: common_s0 + - const: common_s1 + - const: common_s2 + + power-domains: + maxItems: 1 + description: phandle to the associated power domain + + ports: + type: object + description: + Ports as described in Documentation/devicetree/bindings/graph.txt + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + port@0: + type: object + description: + The output port node form video port 1 + + port@1: + type: object + description: + The output port node from video port 2 + + port@2: + type: object + description: + The output port node from video port 3 + + port@3: + type: object + description: + The output port node from video port 4 + + required: + - "#address-cells" + - "#size-cells" + + max-memory-bandwidth: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Input memory (from main memory to dispc) bandwidth limit in + bytes per second + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - interrupts + - interrupt-names + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/soc/ti,sci_pm_domain.h> + + dss: dss@4a00000 { + compatible = "ti,j721e-dss"; + reg = <0x04a00000 0x10000>, /* common_m */ + <0x04a10000 0x10000>, /* common_s0*/ + <0x04b00000 0x10000>, /* common_s1*/ + <0x04b10000 0x10000>, /* common_s2*/ + <0x04a20000 0x10000>, /* vidl1 */ + <0x04a30000 0x10000>, /* vidl2 */ + <0x04a50000 0x10000>, /* vid1 */ + <0x04a60000 0x10000>, /* vid2 */ + <0x04a70000 0x10000>, /* ovr1 */ + <0x04a90000 0x10000>, /* ovr2 */ + <0x04ab0000 0x10000>, /* ovr3 */ + <0x04ad0000 0x10000>, /* ovr4 */ + <0x04a80000 0x10000>, /* vp1 */ + <0x04aa0000 0x10000>, /* vp2 */ + <0x04ac0000 0x10000>, /* vp3 */ + <0x04ae0000 0x10000>, /* vp4 */ + <0x04af0000 0x10000>; /* wb */ + reg-names = "common_m", "common_s0", + "common_s1", "common_s2", + "vidl1", "vidl2","vid1","vid2", + "ovr1", "ovr2", "ovr3", "ovr4", + "vp1", "vp2", "vp3", "vp4", + "wb"; + clocks = <&k3_clks 152 0>, + <&k3_clks 152 1>, + <&k3_clks 152 4>, + <&k3_clks 152 9>, + <&k3_clks 152 13>; + clock-names = "fck", "vp1", "vp2", "vp3", "vp4"; + power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "common_m", + "common_s0", + "common_s1", + "common_s2"; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + + dpi_out_0: endpoint { + remote-endpoint = <&dp_bridge_input>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml new file mode 100644 index 000000000..8f87b82c6 --- /dev/null +++ b/Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml @@ -0,0 +1,106 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 Texas Instruments Incorporated +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/display/ti/ti,k2g-dss.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Texas Instruments K2G Display Subsystem + +maintainers: + - Jyri Sarha <jsarha@ti.com> + - Tomi Valkeinen <tomi.valkeinen@ti.com> + +description: | + The K2G DSS is an ultra-light version of TI Keystone Display + SubSystem. It has only one output port and video plane. The + output is DPI. + +properties: + compatible: + const: ti,k2g-dss + + reg: + items: + - description: cfg DSS top level + - description: common DISPC common + - description: VID1 video plane 1 + - description: OVR1 overlay manager for vp1 + - description: VP1 video port 1 + + reg-names: + items: + - const: cfg + - const: common + - const: vid1 + - const: ovr1 + - const: vp1 + + clocks: + items: + - description: fck DSS functional clock + - description: vp1 Video Port 1 pixel clock + + clock-names: + items: + - const: fck + - const: vp1 + + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + description: phandle to the associated power domain + + port: + type: object + description: + Port as described in Documentation/devicetree/bindings/graph.txt. + The DSS DPI output port node + + max-memory-bandwidth: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Input memory (from main memory to dispc) bandwidth limit in + bytes per second + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - interrupts + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + dss: dss@2540000 { + compatible = "ti,k2g-dss"; + reg = <0x02540000 0x400>, + <0x02550000 0x1000>, + <0x02557000 0x1000>, + <0x0255a800 0x100>, + <0x0255ac00 0x100>; + reg-names = "cfg", "common", "vid1", "ovr1", "vp1"; + clocks = <&k2g_clks 0x2 0>, + <&k2g_clks 0x2 1>; + clock-names = "fck", "vp1"; + interrupts = <GIC_SPI 247 IRQ_TYPE_EDGE_RISING>; + + power-domains = <&k2g_pds 0x2>; + + max-memory-bandwidth = <230000000>; + + port { + dpi_out: endpoint { + remote-endpoint = <&sii9022_in>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/ti/ti,omap-dss.txt b/Documentation/devicetree/bindings/display/ti/ti,omap-dss.txt new file mode 100644 index 000000000..e1ef29569 --- /dev/null +++ b/Documentation/devicetree/bindings/display/ti/ti,omap-dss.txt @@ -0,0 +1,211 @@ +Texas Instruments OMAP Display Subsystem +======================================== + +Generic Description +------------------- + +This document is a generic description of the OMAP Display Subsystem bindings. +Binding details for each OMAP SoC version are described in respective binding +documentation. + +The OMAP Display Subsystem (DSS) hardware consists of DSS Core, DISPC module and +a number of encoder modules. All DSS versions contain DSS Core and DISPC, but +the encoder modules vary. + +The DSS Core is the parent of the other DSS modules, and manages clock routing, +integration to the SoC, etc. + +DISPC is the display controller, which reads pixels from the memory and outputs +a RGB pixel stream to encoders. + +The encoder modules encode the received RGB pixel stream to a video output like +HDMI, MIPI DPI, etc. + +Video Ports +----------- + +The DSS Core and the encoders have video port outputs. The structure of the +video ports is described in Documentation/devicetree/bindings/graph.txt, +and the properties for the ports and endpoints for each encoder are +described in the SoC's DSS binding documentation. + +The video ports are used to describe the connections to external hardware, like +panels or external encoders. + +Aliases +------- + +The board dts file may define aliases for displays to assign "displayX" style +name for each display. If no aliases are defined, a semi-random number is used +for the display. + +Example +------- + +A shortened example of the DSS description for OMAP4, with non-relevant parts +removed, defined in omap4.dtsi: + +dss: dss@58000000 { + compatible = "ti,omap4-dss"; + reg = <0x58000000 0x80>; + status = "disabled"; + ti,hwmods = "dss_core"; + clocks = <&dss_dss_clk>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + dispc@58001000 { + compatible = "ti,omap4-dispc"; + reg = <0x58001000 0x1000>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "dss_dispc"; + clocks = <&dss_dss_clk>; + clock-names = "fck"; + }; + + hdmi: encoder@58006000 { + compatible = "ti,omap4-hdmi"; + reg = <0x58006000 0x200>, + <0x58006200 0x100>, + <0x58006300 0x100>, + <0x58006400 0x1000>; + reg-names = "wp", "pll", "phy", "core"; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + ti,hwmods = "dss_hdmi"; + clocks = <&dss_48mhz_clk>, <&dss_sys_clk>; + clock-names = "fck", "sys_clk"; + }; +}; + +A shortened example of the board description for OMAP4 Panda board, defined in +omap4-panda.dts. + +The Panda board has a DVI and a HDMI connector, and the board contains a TFP410 +chip (MIPI DPI to DVI encoder) and a TPD12S015 chip (HDMI ESD protection & level +shifter). The video pipelines for the connectors are formed as follows: + +DSS Core --(MIPI DPI)--> TFP410 --(DVI)--> DVI Connector +OMAP HDMI --(HDMI)--> TPD12S015 --(HDMI)--> HDMI Connector + +/ { + aliases { + display0 = &dvi0; + display1 = &hdmi0; + }; + + tfp410: encoder@0 { + compatible = "ti,tfp410"; + gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; /* 0, power-down */ + + pinctrl-names = "default"; + pinctrl-0 = <&tfp410_pins>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + tfp410_in: endpoint@0 { + remote-endpoint = <&dpi_out>; + }; + }; + + port@1 { + reg = <1>; + + tfp410_out: endpoint@0 { + remote-endpoint = <&dvi_connector_in>; + }; + }; + }; + }; + + dvi0: connector@0 { + compatible = "dvi-connector"; + label = "dvi"; + + i2c-bus = <&i2c3>; + + port { + dvi_connector_in: endpoint { + remote-endpoint = <&tfp410_out>; + }; + }; + }; + + tpd12s015: encoder@1 { + compatible = "ti,tpd12s015"; + + pinctrl-names = "default"; + pinctrl-0 = <&tpd12s015_pins>; + + gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>, /* 60, CT CP HPD */ + <&gpio2 9 GPIO_ACTIVE_HIGH>, /* 41, LS OE */ + <&gpio2 31 GPIO_ACTIVE_HIGH>; /* 63, HPD */ + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + tpd12s015_in: endpoint@0 { + remote-endpoint = <&hdmi_out>; + }; + }; + + port@1 { + reg = <1>; + + tpd12s015_out: endpoint@0 { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; + }; + + hdmi0: connector@1 { + compatible = "hdmi-connector"; + label = "hdmi"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&tpd12s015_out>; + }; + }; + }; +}; + +&dss { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = <&dss_dpi_pins>; + + port { + dpi_out: endpoint { + remote-endpoint = <&tfp410_in>; + data-lines = <24>; + }; + }; +}; + +&hdmi { + status = "ok"; + vdda-supply = <&vdac>; + + pinctrl-names = "default"; + pinctrl-0 = <&dss_hdmi_pins>; + + port { + hdmi_out: endpoint { + remote-endpoint = <&tpd12s015_in>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/display/ti/ti,omap2-dss.txt b/Documentation/devicetree/bindings/display/ti/ti,omap2-dss.txt new file mode 100644 index 000000000..ee867c4d1 --- /dev/null +++ b/Documentation/devicetree/bindings/display/ti/ti,omap2-dss.txt @@ -0,0 +1,58 @@ +Texas Instruments OMAP2 Display Subsystem +========================================= + +See Documentation/devicetree/bindings/display/ti/ti,omap-dss.txt for generic +description about OMAP Display Subsystem bindings. + +DSS Core +-------- + +Required properties: +- compatible: "ti,omap2-dss" +- reg: address and length of the register space +- ti,hwmods: "dss_core" + +Optional nodes: +- Video port for DPI output + +DPI Endpoint required properties: +- data-lines: number of lines used + + +DISPC +----- + +Required properties: +- compatible: "ti,omap2-dispc" +- reg: address and length of the register space +- ti,hwmods: "dss_dispc" +- interrupts: the DISPC interrupt + +Optional properties: +- max-memory-bandwidth: Input memory (from main memory to dispc) bandwidth limit + in bytes per second + + +RFBI +---- + +Required properties: +- compatible: "ti,omap2-rfbi" +- reg: address and length of the register space +- ti,hwmods: "dss_rfbi" + + +VENC +---- + +Required properties: +- compatible: "ti,omap2-venc" +- reg: address and length of the register space +- ti,hwmods: "dss_venc" +- vdda-supply: power supply for DAC + +VENC Endpoint required properties: + +Required properties: +- ti,invert-polarity: invert the polarity of the video signal +- ti,channels: 1 for composite, 2 for s-video diff --git a/Documentation/devicetree/bindings/display/ti/ti,omap3-dss.txt b/Documentation/devicetree/bindings/display/ti/ti,omap3-dss.txt new file mode 100644 index 000000000..cd02516a4 --- /dev/null +++ b/Documentation/devicetree/bindings/display/ti/ti,omap3-dss.txt @@ -0,0 +1,87 @@ +Texas Instruments OMAP3 Display Subsystem +========================================= + +See Documentation/devicetree/bindings/display/ti/ti,omap-dss.txt for generic +description about OMAP Display Subsystem bindings. + +DSS Core +-------- + +Required properties: +- compatible: "ti,omap3-dss" +- reg: address and length of the register space +- ti,hwmods: "dss_core" +- clocks: handle to fclk +- clock-names: "fck" + +Optional nodes: +- Video ports: + - Port 0: DPI output + - Port 1: SDI output + +DPI Endpoint required properties: +- data-lines: number of lines used + +SDI Endpoint required properties: +- datapairs: number of datapairs used + + +DISPC +----- + +Required properties: +- compatible: "ti,omap3-dispc" +- reg: address and length of the register space +- ti,hwmods: "dss_dispc" +- interrupts: the DISPC interrupt +- clocks: handle to fclk +- clock-names: "fck" + +Optional properties: +- max-memory-bandwidth: Input memory (from main memory to dispc) bandwidth limit + in bytes per second + + +RFBI +---- + +Required properties: +- compatible: "ti,omap3-rfbi" +- reg: address and length of the register space +- ti,hwmods: "dss_rfbi" +- clocks: handles to fclk and iclk +- clock-names: "fck", "ick" + + +VENC +---- + +Required properties: +- compatible: "ti,omap3-venc" +- reg: address and length of the register space +- ti,hwmods: "dss_venc" +- vdda-supply: power supply for DAC +- clocks: handle to fclk +- clock-names: "fck" + +VENC Endpoint required properties: +- ti,invert-polarity: invert the polarity of the video signal +- ti,channels: 1 for composite, 2 for s-video + + +DSI +--- + +Required properties: +- compatible: "ti,omap3-dsi" +- reg: addresses and lengths of the register spaces for 'proto', 'phy' and 'pll' +- reg-names: "proto", "phy", "pll" +- interrupts: the DSI interrupt line +- ti,hwmods: "dss_dsi1" +- vdd-supply: power supply for DSI +- clocks: handles to fclk and pll clock +- clock-names: "fck", "sys_clk" + +DSI Endpoint required properties: +- lanes: list of pin numbers for the DSI lanes: CLK+, CLK-, DATA0+, DATA0-, + DATA1+, DATA1-, ... diff --git a/Documentation/devicetree/bindings/display/ti/ti,omap4-dss.txt b/Documentation/devicetree/bindings/display/ti/ti,omap4-dss.txt new file mode 100644 index 000000000..0f85f6b3a --- /dev/null +++ b/Documentation/devicetree/bindings/display/ti/ti,omap4-dss.txt @@ -0,0 +1,119 @@ +Texas Instruments OMAP4 Display Subsystem +========================================= + +See Documentation/devicetree/bindings/display/ti/ti,omap-dss.txt for generic +description about OMAP Display Subsystem bindings. + +DSS Core +-------- + +Required properties: +- compatible: "ti,omap4-dss" +- reg: address and length of the register space +- ti,hwmods: "dss_core" +- clocks: handle to fclk +- clock-names: "fck" + +Required nodes: +- DISPC + +Optional nodes: +- DSS Submodules: RFBI, VENC, DSI, HDMI +- Video port for DPI output + +DPI Endpoint required properties: +- data-lines: number of lines used + + +DISPC +----- + +Required properties: +- compatible: "ti,omap4-dispc" +- reg: address and length of the register space +- ti,hwmods: "dss_dispc" +- interrupts: the DISPC interrupt +- clocks: handle to fclk +- clock-names: "fck" + +Optional properties: +- max-memory-bandwidth: Input memory (from main memory to dispc) bandwidth limit + in bytes per second + + +RFBI +---- + +Required properties: +- compatible: "ti,omap4-rfbi" +- reg: address and length of the register space +- ti,hwmods: "dss_rfbi" +- clocks: handles to fclk and iclk +- clock-names: "fck", "ick" + +Optional nodes: +- Video port for RFBI output +- RFBI controlled peripherals + + +VENC +---- + +Required properties: +- compatible: "ti,omap4-venc" +- reg: address and length of the register space +- ti,hwmods: "dss_venc" +- vdda-supply: power supply for DAC +- clocks: handle to fclk +- clock-names: "fck" + +Optional nodes: +- Video port for VENC output + +VENC Endpoint required properties: +- ti,invert-polarity: invert the polarity of the video signal +- ti,channels: 1 for composite, 2 for s-video + + +DSI +--- + +Required properties: +- compatible: "ti,omap4-dsi" +- reg: addresses and lengths of the register spaces for 'proto', 'phy' and 'pll' +- reg-names: "proto", "phy", "pll" +- interrupts: the DSI interrupt line +- ti,hwmods: "dss_dsi1" or "dss_dsi2" +- vdd-supply: power supply for DSI +- clocks: handles to fclk and pll clock +- clock-names: "fck", "sys_clk" + +Optional nodes: +- Video port for DSI output +- DSI controlled peripherals + +DSI Endpoint required properties: +- lanes: list of pin numbers for the DSI lanes: CLK+, CLK-, DATA0+, DATA0-, + DATA1+, DATA1-, ... + + +HDMI +---- + +Required properties: +- compatible: "ti,omap4-hdmi" +- reg: addresses and lengths of the register spaces for 'wp', 'pll', 'phy', + 'core' +- reg-names: "wp", "pll", "phy", "core" +- interrupts: the HDMI interrupt line +- ti,hwmods: "dss_hdmi" +- vdda-supply: vdda power supply +- clocks: handles to fclk and pll clock +- clock-names: "fck", "sys_clk" + +Optional nodes: +- Video port for HDMI output + +HDMI Endpoint optional properties: +- lanes: list of 8 pin numbers for the HDMI lanes: CLK+, CLK-, D0+, D0-, + D1+, D1-, D2+, D2-. (default: 0,1,2,3,4,5,6,7) diff --git a/Documentation/devicetree/bindings/display/ti/ti,omap5-dss.txt b/Documentation/devicetree/bindings/display/ti/ti,omap5-dss.txt new file mode 100644 index 000000000..208612186 --- /dev/null +++ b/Documentation/devicetree/bindings/display/ti/ti,omap5-dss.txt @@ -0,0 +1,100 @@ +Texas Instruments OMAP5 Display Subsystem +========================================= + +See Documentation/devicetree/bindings/display/ti/ti,omap-dss.txt for generic +description about OMAP Display Subsystem bindings. + +DSS Core +-------- + +Required properties: +- compatible: "ti,omap5-dss" +- reg: address and length of the register space +- ti,hwmods: "dss_core" +- clocks: handle to fclk +- clock-names: "fck" + +Required nodes: +- DISPC + +Optional nodes: +- DSS Submodules: RFBI, DSI, HDMI +- Video port for DPI output + +DPI Endpoint required properties: +- data-lines: number of lines used + + +DISPC +----- + +Required properties: +- compatible: "ti,omap5-dispc" +- reg: address and length of the register space +- ti,hwmods: "dss_dispc" +- interrupts: the DISPC interrupt +- clocks: handle to fclk +- clock-names: "fck" + +Optional properties: +- max-memory-bandwidth: Input memory (from main memory to dispc) bandwidth limit + in bytes per second + + +RFBI +---- + +Required properties: +- compatible: "ti,omap5-rfbi" +- reg: address and length of the register space +- ti,hwmods: "dss_rfbi" +- clocks: handles to fclk and iclk +- clock-names: "fck", "ick" + +Optional nodes: +- Video port for RFBI output +- RFBI controlled peripherals + + +DSI +--- + +Required properties: +- compatible: "ti,omap5-dsi" +- reg: addresses and lengths of the register spaces for 'proto', 'phy' and 'pll' +- reg-names: "proto", "phy", "pll" +- interrupts: the DSI interrupt line +- ti,hwmods: "dss_dsi1" or "dss_dsi2" +- vdd-supply: power supply for DSI +- clocks: handles to fclk and pll clock +- clock-names: "fck", "sys_clk" + +Optional nodes: +- Video port for DSI output +- DSI controlled peripherals + +DSI Endpoint required properties: +- lanes: list of pin numbers for the DSI lanes: CLK+, CLK-, DATA0+, DATA0-, + DATA1+, DATA1-, ... + + +HDMI +---- + +Required properties: +- compatible: "ti,omap5-hdmi" +- reg: addresses and lengths of the register spaces for 'wp', 'pll', 'phy', + 'core' +- reg-names: "wp", "pll", "phy", "core" +- interrupts: the HDMI interrupt line +- ti,hwmods: "dss_hdmi" +- vdda-supply: vdda power supply +- clocks: handles to fclk and pll clock +- clock-names: "fck", "sys_clk" + +Optional nodes: +- Video port for HDMI output + +HDMI Endpoint optional properties: +- lanes: list of 8 pin numbers for the HDMI lanes: CLK+, CLK-, D0+, D0-, + D1+, D1-, D2+, D2-. (default: 0,1,2,3,4,5,6,7) diff --git a/Documentation/devicetree/bindings/display/ti/ti,opa362.txt b/Documentation/devicetree/bindings/display/ti/ti,opa362.txt new file mode 100644 index 000000000..f96083c0b --- /dev/null +++ b/Documentation/devicetree/bindings/display/ti/ti,opa362.txt @@ -0,0 +1,38 @@ +OPA362 analog video amplifier + +Required properties: +- compatible: "ti,opa362" +- enable-gpios: enable/disable output gpio + +Required node: +- Video port 0 for opa362 input +- Video port 1 for opa362 output + +Example: + +tv_amp: opa362 { + compatible = "ti,opa362"; + enable-gpios = <&gpio1 23 0>; /* GPIO to enable video out amplifier */ + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + opa_in: endpoint@0 { + remote-endpoint = <&venc_out>; + }; + }; + + port@1 { + reg = <1>; + opa_out: endpoint@0 { + remote-endpoint = <&tv_connector_in>; + }; + }; + }; +}; + + + diff --git a/Documentation/devicetree/bindings/display/ti/ti,tpd12s015.txt b/Documentation/devicetree/bindings/display/ti/ti,tpd12s015.txt new file mode 100644 index 000000000..26e6d32e3 --- /dev/null +++ b/Documentation/devicetree/bindings/display/ti/ti,tpd12s015.txt @@ -0,0 +1,44 @@ +TPD12S015 HDMI level shifter and ESD protection chip +==================================================== + +Required properties: +- compatible: "ti,tpd12s015" + +Optional properties: +- gpios: CT CP HPD, LS OE and HPD gpios + +Required nodes: +- Video port 0 for HDMI input +- Video port 1 for HDMI output + +Example +------- + +tpd12s015: encoder@1 { + compatible = "ti,tpd12s015"; + + gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>, /* 60, CT CP HPD */ + <&gpio2 9 GPIO_ACTIVE_HIGH>, /* 41, LS OE */ + <&gpio2 31 GPIO_ACTIVE_HIGH>; /* 63, HPD */ + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + tpd12s015_in: endpoint@0 { + remote-endpoint = <&hdmi_out>; + }; + }; + + port@1 { + reg = <1>; + + tpd12s015_out: endpoint@0 { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/display/tilcdc/panel.txt b/Documentation/devicetree/bindings/display/tilcdc/panel.txt new file mode 100644 index 000000000..808216310 --- /dev/null +++ b/Documentation/devicetree/bindings/display/tilcdc/panel.txt @@ -0,0 +1,66 @@ +Device-Tree bindings for tilcdc DRM generic panel output driver + +Required properties: + - compatible: value should be "ti,tilcdc,panel". + - panel-info: configuration info to configure LCDC correctly for the panel + - ac-bias: AC Bias Pin Frequency + - ac-bias-intrpt: AC Bias Pin Transitions per Interrupt + - dma-burst-sz: DMA burst size + - bpp: Bits per pixel + - fdd: FIFO DMA Request Delay + - sync-edge: Horizontal and Vertical Sync Edge: 0=rising 1=falling + - sync-ctrl: Horizontal and Vertical Sync: Control: 0=ignore + - raster-order: Raster Data Order Select: 1=Most-to-least 0=Least-to-most + - fifo-th: DMA FIFO threshold + - display-timings: typical videomode of lcd panel. Multiple video modes + can be listed if the panel supports multiple timings, but the 'native-mode' + should be the preferred/default resolution. Refer to + Documentation/devicetree/bindings/display/panel/display-timing.txt for display + timing binding details. + +Optional properties: +- backlight: phandle of the backlight device attached to the panel +- enable-gpios: GPIO pin to enable or disable the panel + +Recommended properties: + - pinctrl-names, pinctrl-0: the pincontrol settings to configure + muxing properly for pins that connect to TFP410 device + +Example: + + /* Settings for CDTech_S035Q01 / LCD3 cape: */ + lcd3 { + compatible = "ti,tilcdc,panel"; + pinctrl-names = "default"; + pinctrl-0 = <&bone_lcd3_cape_lcd_pins>; + backlight = <&backlight>; + enable-gpios = <&gpio3 19 0>; + + panel-info { + ac-bias = <255>; + ac-bias-intrpt = <0>; + dma-burst-sz = <16>; + bpp = <16>; + fdd = <0x80>; + sync-edge = <0>; + sync-ctrl = <1>; + raster-order = <0>; + fifo-th = <0>; + }; + display-timings { + native-mode = <&timing0>; + timing0: 320x240 { + hactive = <320>; + vactive = <240>; + hback-porch = <21>; + hfront-porch = <58>; + hsync-len = <47>; + vback-porch = <11>; + vfront-porch = <23>; + vsync-len = <2>; + clock-frequency = <8000000>; + hsync-active = <0>; + vsync-active = <0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt b/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt new file mode 100644 index 000000000..3e64075ac --- /dev/null +++ b/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt @@ -0,0 +1,82 @@ +Device-Tree bindings for tilcdc DRM driver + +Required properties: + - compatible: value should be one of the following: + - "ti,am33xx-tilcdc" for AM335x based boards + - "ti,da850-tilcdc" for DA850/AM18x/OMAP-L138 based boards + - interrupts: the interrupt number + - reg: base address and size of the LCDC device + +Recommended properties: + - ti,hwmods: Name of the hwmod associated to the LCDC + +Optional properties: + - max-bandwidth: The maximum pixels per second that the memory + interface / lcd controller combination can sustain + - max-width: The maximum horizontal pixel width supported by + the lcd controller. + - max-pixelclock: The maximum pixel clock that can be supported + by the lcd controller in KHz. + - blue-and-red-wiring: Recognized values "straight" or "crossed". + This property deals with the LCDC revision 2 (found on AM335x) + color errata [1]. + - "straight" indicates normal wiring that supports RGB565, + BGR888, and XBGR8888 color formats. + - "crossed" indicates wiring that has blue and red wires + crossed. This setup supports BGR565, RGB888 and XRGB8888 + formats. + - If the property is not present or its value is not recognized + the legacy mode is assumed. This configuration supports RGB565, + RGB888 and XRGB8888 formats. However, depending on wiring, the red + and blue colors are swapped in either 16 or 24-bit color modes. + +Optional nodes: + + - port/ports: to describe a connection to an external encoder. The + binding follows Documentation/devicetree/bindings/graph.txt and + supports a single port with a single endpoint. + + - See also Documentation/devicetree/bindings/display/tilcdc/panel.txt and + Documentation/devicetree/bindings/display/bridge/ti,tfp410.yaml for connecting + tfp410 DVI encoder or lcd panel to lcdc + +[1] There is an errata about AM335x color wiring. For 16-bit color mode + the wires work as they should (LCD_DATA[0:4] is for Blue[3:7]), + but for 24 bit color modes the wiring of blue and red components is + crossed and LCD_DATA[0:4] is for Red[3:7] and LCD_DATA[11:15] is + for Blue[3-7]. For more details see section 3.1.1 in AM335x + Silicon Errata: + https://www.ti.com/general/docs/lit/getliterature.tsp?baseLiteratureNumber=sprz360 + +Example: + + fb: fb@4830e000 { + compatible = "ti,am33xx-tilcdc", "ti,da850-tilcdc"; + reg = <0x4830e000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <36>; + ti,hwmods = "lcdc"; + + blue-and-red-wiring = "crossed"; + + port { + lcdc_0: endpoint@0 { + remote-endpoint = <&hdmi_0>; + }; + }; + }; + + tda19988: tda19988 { + compatible = "nxp,tda998x"; + reg = <0x70>; + + pinctrl-names = "default", "off"; + pinctrl-0 = <&nxp_hdmi_bonelt_pins>; + pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>; + + port { + hdmi_0: endpoint@0 { + remote-endpoint = <&lcdc_0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/truly,nt35597.txt b/Documentation/devicetree/bindings/display/truly,nt35597.txt new file mode 100644 index 000000000..f39c77ee3 --- /dev/null +++ b/Documentation/devicetree/bindings/display/truly,nt35597.txt @@ -0,0 +1,59 @@ +Truly model NT35597 DSI display driver + +The Truly NT35597 is a generic display driver, currently only configured +for use in the 2K display on the Qualcomm SDM845 MTP board. + +Required properties: +- compatible: should be "truly,nt35597-2K-display" +- vdda-supply: phandle of the regulator that provides the supply voltage + Power IC supply +- vdispp-supply: phandle of the regulator that provides the supply voltage + for positive LCD bias +- vdispn-supply: phandle of the regulator that provides the supply voltage + for negative LCD bias +- reset-gpios: phandle of gpio for reset line + This should be 8mA, gpio can be configured using mux, pinctrl, pinctrl-names + (active low) +- mode-gpios: phandle of the gpio for choosing the mode of the display + for single DSI or Dual DSI + This should be low for dual DSI and high for single DSI mode +- ports: This device has two video ports driven by two DSIs. Their connections + are modeled using the OF graph bindings specified in + Documentation/devicetree/bindings/graph.txt. + - port@0: DSI input port driven by master DSI + - port@1: DSI input port driven by secondary DSI + +Example: + + dsi@ae94000 { + panel@0 { + compatible = "truly,nt35597-2K-display"; + reg = <0>; + vdda-supply = <&pm8998_l14>; + vdispp-supply = <&lab_regulator>; + vdispn-supply = <&ibb_regulator>; + pinctrl-names = "default", "suspend"; + pinctrl-0 = <&dpu_dsi_active>; + pinctrl-1 = <&dpu_dsi_suspend>; + + reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; + mode-gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + panel0_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + panel1_in: endpoint { + remote-endpoint = <&dsi1_out>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/via,vt8500-fb.txt b/Documentation/devicetree/bindings/display/via,vt8500-fb.txt new file mode 100644 index 000000000..2871e218a --- /dev/null +++ b/Documentation/devicetree/bindings/display/via,vt8500-fb.txt @@ -0,0 +1,36 @@ +VIA VT8500 Framebuffer +----------------------------------------------------- + +Required properties: +- compatible : "via,vt8500-fb" +- reg : Should contain 1 register ranges(address and length) +- interrupts : framebuffer controller interrupt +- bits-per-pixel : bit depth of framebuffer (16 or 32) + +Required subnodes: +- display-timings: see display-timing.txt for information + +Example: + + fb@d8050800 { + compatible = "via,vt8500-fb"; + reg = <0xd800e400 0x400>; + interrupts = <12>; + bits-per-pixel = <16>; + + display-timings { + native-mode = <&timing0>; + timing0: 800x480 { + clock-frequency = <0>; /* unused but required */ + hactive = <800>; + vactive = <480>; + hfront-porch = <40>; + hback-porch = <88>; + hsync-len = <0>; + vback-porch = <32>; + vfront-porch = <11>; + vsync-len = <1>; + }; + }; + }; + diff --git a/Documentation/devicetree/bindings/display/wm,prizm-ge-rops.txt b/Documentation/devicetree/bindings/display/wm,prizm-ge-rops.txt new file mode 100644 index 000000000..a850fa011 --- /dev/null +++ b/Documentation/devicetree/bindings/display/wm,prizm-ge-rops.txt @@ -0,0 +1,13 @@ +VIA/Wondermedia Graphics Engine Controller +----------------------------------------------------- + +Required properties: +- compatible : "wm,prizm-ge-rops" +- reg : Should contain 1 register ranges(address and length) + +Example: + + ge_rops@d8050400 { + compatible = "wm,prizm-ge-rops"; + reg = <0xd8050400 0x100>; + }; diff --git a/Documentation/devicetree/bindings/display/wm,wm8505-fb.txt b/Documentation/devicetree/bindings/display/wm,wm8505-fb.txt new file mode 100644 index 000000000..0bcadb284 --- /dev/null +++ b/Documentation/devicetree/bindings/display/wm,wm8505-fb.txt @@ -0,0 +1,33 @@ +Wondermedia WM8505 Framebuffer +----------------------------------------------------- + +Required properties: +- compatible : "wm,wm8505-fb" +- reg : Should contain 1 register ranges(address and length) +- bits-per-pixel : bit depth of framebuffer (16 or 32) + +Required subnodes: +- display-timings: see display-timing.txt for information + +Example: + + fb@d8051700 { + compatible = "wm,wm8505-fb"; + reg = <0xd8051700 0x200>; + bits-per-pixel = <16>; + + display-timings { + native-mode = <&timing0>; + timing0: 800x480 { + clock-frequency = <0>; /* unused but required */ + hactive = <800>; + vactive = <480>; + hfront-porch = <40>; + hback-porch = <88>; + hsync-len = <0>; + vback-porch = <32>; + vfront-porch = <11>; + vsync-len = <1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml b/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml new file mode 100644 index 000000000..7b9d468c3 --- /dev/null +++ b/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml @@ -0,0 +1,174 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/xlnx/xlnx,zynqmp-dpsub.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx ZynqMP DisplayPort Subsystem + +description: | + The DisplayPort subsystem of Xilinx ZynqMP (Zynq UltraScale+ MPSoC) + implements the display and audio pipelines based on the DisplayPort v1.2 + standard. The subsystem includes multiple functional blocks as below: + + +------------------------------------------------------------+ + +--------+ | +----------------+ +-----------+ | + | DPDMA | --->| | --> | Video | Video +-------------+ | + | 4x vid | | | | | Rendering | -+--> | | | +------+ + | 2x aud | | | Audio/Video | --> | Pipeline | | | DisplayPort |---> | PHY0 | + +--------+ | | Buffer Manager | +-----------+ | | Source | | +------+ + | | and STC | +-----------+ | | Controller | | +------+ + Live Video --->| | --> | Audio | Audio | |---> | PHY1 | + | | | | Mixer | --+-> | | | +------+ + Live Audio --->| | --> | | || +-------------+ | + | +----------------+ +-----------+ || | + +---------------------------------------||-------------------+ + vv + Blended Video and + Mixed Audio to PL + + The Buffer Manager interacts with external interface such as DMA engines or + live audio/video streams from the programmable logic. The Video Rendering + Pipeline blends the video and graphics layers and performs colorspace + conversion. The Audio Mixer mixes the incoming audio streams. The DisplayPort + Source Controller handles the DisplayPort protocol and connects to external + PHYs. + + The subsystem supports 2 video and 2 audio streams, and various pixel formats + and depths up to 4K@30 resolution. + + Please refer to "Zynq UltraScale+ Device Technical Reference Manual" + (https://www.xilinx.com/support/documentation/user_guides/ug1085-zynq-ultrascale-trm.pdf) + for more details. + +maintainers: + - Laurent Pinchart <laurent.pinchart@ideasonboard.com> + +properties: + compatible: + const: xlnx,zynqmp-dpsub-1.7 + + reg: + maxItems: 4 + reg-names: + items: + - const: dp + - const: blend + - const: av_buf + - const: aud + + interrupts: + maxItems: 1 + + clocks: + description: + The APB clock and at least one video clock are mandatory, the audio clock + is optional. + minItems: 2 + maxItems: 4 + items: + - description: dp_apb_clk is the APB clock + - description: dp_aud_clk is the Audio clock + - description: + dp_vtc_pixel_clk_in is the non-live video clock (from Processing + System) + - description: + dp_live_video_in_clk is the live video clock (from Programmable + Logic) + clock-names: + oneOf: + - minItems: 2 + maxItems: 3 + items: + - const: dp_apb_clk + - enum: [ dp_vtc_pixel_clk_in, dp_live_video_in_clk ] + - enum: [ dp_vtc_pixel_clk_in, dp_live_video_in_clk ] + - minItems: 3 + maxItems: 4 + items: + - const: dp_apb_clk + - const: dp_aud_clk + - enum: [ dp_vtc_pixel_clk_in, dp_live_video_in_clk ] + - enum: [ dp_vtc_pixel_clk_in, dp_live_video_in_clk ] + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + dmas: + maxItems: 4 + items: + - description: Video layer, plane 0 (RGB or luma) + - description: Video layer, plane 1 (U/V or U) + - description: Video layer, plane 2 (V) + - description: Graphics layer + dma-names: + items: + - const: vid0 + - const: vid1 + - const: vid2 + - const: gfx0 + + phys: + description: PHYs for the DP data lanes + minItems: 1 + maxItems: 2 + phy-names: + minItems: 1 + maxItems: 2 + items: + - const: dp-phy0 + - const: dp-phy1 + +required: + - compatible + - reg + - reg-names + - interrupts + - clocks + - clock-names + - power-domains + - resets + - dmas + - dma-names + - phys + - phy-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/phy/phy.h> + #include <dt-bindings/reset/xlnx-zynqmp-resets.h> + + display@fd4a0000 { + compatible = "xlnx,zynqmp-dpsub-1.7"; + reg = <0xfd4a0000 0x1000>, + <0xfd4aa000 0x1000>, + <0xfd4ab000 0x1000>, + <0xfd4ac000 0x1000>; + reg-names = "dp", "blend", "av_buf", "aud"; + interrupts = <0 119 4>; + interrupt-parent = <&gic>; + + clock-names = "dp_apb_clk", "dp_aud_clk", "dp_live_video_in_clk"; + clocks = <&dp_aclk>, <&clkc 17>, <&si570_1>; + + power-domains = <&pd_dp>; + resets = <&reset ZYNQMP_RESET_DP>; + + dma-names = "vid0", "vid1", "vid2", "gfx0"; + dmas = <&xlnx_dpdma 0>, + <&xlnx_dpdma 1>, + <&xlnx_dpdma 2>, + <&xlnx_dpdma 3>; + + phys = <&psgtr 1 PHY_TYPE_DP 0 3 27000000>, + <&psgtr 0 PHY_TYPE_DP 1 3 27000000>; + + phy-names = "dp-phy0", "dp-phy1"; + }; + +... diff --git a/Documentation/devicetree/bindings/display/zte,vou.txt b/Documentation/devicetree/bindings/display/zte,vou.txt new file mode 100644 index 000000000..38476475f --- /dev/null +++ b/Documentation/devicetree/bindings/display/zte,vou.txt @@ -0,0 +1,120 @@ +ZTE VOU Display Controller + +This is a display controller found on ZTE ZX296718 SoC. It includes multiple +Graphic Layer (GL) and Video Layer (VL), two Mixers/Channels, and a few blocks +handling scaling, color space conversion etc. VOU also integrates the support +for typical output devices, like HDMI, TV Encoder, VGA, and RGB LCD. + +* Master VOU node + +It must be the parent node of all the sub-device nodes. + +Required properties: + - compatible: should be "zte,zx296718-vou" + - #address-cells: should be <1> + - #size-cells: should be <1> + - ranges: list of address translations between VOU and sub-devices + +* VOU DPC device + +Required properties: + - compatible: should be "zte,zx296718-dpc" + - reg: Physical base address and length of DPC register regions, one for each + entry in 'reg-names' + - reg-names: The names of register regions. The following regions are required: + "osd" + "timing_ctrl" + "dtrc" + "vou_ctrl" + "otfppu" + - interrupts: VOU DPC interrupt number to CPU + - clocks: A list of phandle + clock-specifier pairs, one for each entry + in 'clock-names' + - clock-names: A list of clock names. The following clocks are required: + "aclk" + "ppu_wclk" + "main_wclk" + "aux_wclk" + +* HDMI output device + +Required properties: + - compatible: should be "zte,zx296718-hdmi" + - reg: Physical base address and length of the HDMI device IO region + - interrupts : HDMI interrupt number to CPU + - clocks: A list of phandle + clock-specifier pairs, one for each entry + in 'clock-names' + - clock-names: A list of clock names. The following clocks are required: + "osc_cec" + "osc_clk" + "xclk" + +* TV Encoder output device + +Required properties: + - compatible: should be "zte,zx296718-tvenc" + - reg: Physical base address and length of the TVENC device IO region + - zte,tvenc-power-control: the phandle to SYSCTRL block followed by two + integer cells. The first cell is the offset of SYSCTRL register used + to control TV Encoder DAC power, and the second cell is the bit mask. + +* VGA output device + +Required properties: + - compatible: should be "zte,zx296718-vga" + - reg: Physical base address and length of the VGA device IO region + - interrupts : VGA interrupt number to CPU + - clocks: Phandle with clock-specifier pointing to VGA I2C clock. + - clock-names: Must be "i2c_wclk". + - zte,vga-power-control: the phandle to SYSCTRL block followed by two + integer cells. The first cell is the offset of SYSCTRL register used + to control VGA DAC power, and the second cell is the bit mask. + +Example: + +vou: vou@1440000 { + compatible = "zte,zx296718-vou"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1440000 0x10000>; + + dpc: dpc@0 { + compatible = "zte,zx296718-dpc"; + reg = <0x0000 0x1000>, <0x1000 0x1000>, + <0x5000 0x1000>, <0x6000 0x1000>, + <0xa000 0x1000>; + reg-names = "osd", "timing_ctrl", + "dtrc", "vou_ctrl", + "otfppu"; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&topcrm VOU_ACLK>, <&topcrm VOU_PPU_WCLK>, + <&topcrm VOU_MAIN_WCLK>, <&topcrm VOU_AUX_WCLK>; + clock-names = "aclk", "ppu_wclk", + "main_wclk", "aux_wclk"; + }; + + vga: vga@8000 { + compatible = "zte,zx296718-vga"; + reg = <0x8000 0x1000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&topcrm VGA_I2C_WCLK>; + clock-names = "i2c_wclk"; + zte,vga-power-control = <&sysctrl 0x170 0xe0>; + }; + + hdmi: hdmi@c000 { + compatible = "zte,zx296718-hdmi"; + reg = <0xc000 0x4000>; + interrupts = <GIC_SPI 82 IRQ_TYPE_EDGE_RISING>; + clocks = <&topcrm HDMI_OSC_CEC>, + <&topcrm HDMI_OSC_CLK>, + <&topcrm HDMI_XCLK>; + clock-names = "osc_cec", "osc_clk", "xclk"; + }; + + tvenc: tvenc@2000 { + compatible = "zte,zx296718-tvenc"; + reg = <0x2000 0x1000>; + zte,tvenc-power-control = <&sysctrl 0x170 0x10>; + }; +}; |