Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

10 files changed, 961 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
new file mode 100644
index 000000000..b1844b9c2
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpu/arm,mali-bifrost.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Mali Bifrost GPU
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+properties:
+  $nodename:
+    pattern: '^gpu@[a-f0-9]+$'
+
+  compatible:
+    items:
+      - enum:
+          - amlogic,meson-g12a-mali
+          - realtek,rtd1619-mali
+          - rockchip,px30-mali
+      - const: arm,mali-bifrost # Mali Bifrost GPU model/revision is fully discoverable
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Job interrupt
+      - description: MMU interrupt
+      - description: GPU interrupt
+
+  interrupt-names:
+    items:
+      - const: job
+      - const: mmu
+      - const: gpu
+
+  clocks:
+    maxItems: 1
+
+  mali-supply: true
+
+  operating-points-v2: true
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 2
+
+  "#cooling-cells":
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: amlogic,meson-g12a-mali
+    then:
+      required:
+        - resets
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    gpu@ffe40000 {
+      compatible = "amlogic,meson-g12a-mali", "arm,mali-bifrost";
+      reg = <0xffe40000 0x10000>;
+      interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+             <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+             <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "job", "mmu", "gpu";
+      clocks = <&clk 1>;
+      mali-supply = <&vdd_gpu>;
+      operating-points-v2 = <&gpu_opp_table>;
+      resets = <&reset 0>, <&reset 1>;
+    };
+
+    gpu_opp_table: opp_table0 {
+      compatible = "operating-points-v2";
+
+      opp-533000000 {
+        opp-hz = /bits/ 64 <533000000>;
+        opp-microvolt = <1250000>;
+      };
+      opp-450000000 {
+        opp-hz = /bits/ 64 <450000000>;
+        opp-microvolt = <1150000>;
+      };
+      opp-400000000 {
+        opp-hz = /bits/ 64 <400000000>;
+        opp-microvolt = <1125000>;
+      };
+      opp-350000000 {
+        opp-hz = /bits/ 64 <350000000>;
+        opp-microvolt = <1075000>;
+      };
+      opp-266000000 {
+        opp-hz = /bits/ 64 <266000000>;
+        opp-microvolt = <1025000>;
+      };
+      opp-160000000 {
+        opp-hz = /bits/ 64 <160000000>;
+        opp-microvolt = <925000>;
+      };
+      opp-100000000 {
+        opp-hz = /bits/ 64 <100000000>;
+        opp-microvolt = <912500>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
new file mode 100644
index 000000000..e9c42b59f
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
@@ -0,0 +1,179 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpu/arm,mali-midgard.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Mali Midgard GPU
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+properties:
+  $nodename:
+    pattern: '^gpu@[a-f0-9]+$'
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - samsung,exynos5250-mali
+          - const: arm,mali-t604
+      - items:
+          - enum:
+              - samsung,exynos5420-mali
+          - const: arm,mali-t628
+      - items:
+          - enum:
+              - allwinner,sun50i-h6-mali
+          - const: arm,mali-t720
+      - items:
+          - enum:
+              - amlogic,meson-gxm-mali
+              - realtek,rtd1295-mali
+          - const: arm,mali-t820
+      - items:
+          - enum:
+              - arm,juno-mali
+          - const: arm,mali-t624
+      - items:
+          - enum:
+              - rockchip,rk3288-mali
+              - samsung,exynos5433-mali
+          - const: arm,mali-t760
+      - items:
+          - enum:
+              - rockchip,rk3399-mali
+          - const: arm,mali-t860
+
+          # "arm,mali-t830"
+          # "arm,mali-t880"
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Job interrupt
+      - description: MMU interrupt
+      - description: GPU interrupt
+
+  interrupt-names:
+    items:
+      - const: job
+      - const: mmu
+      - const: gpu
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: core
+      - const: bus
+
+  mali-supply: true
+  opp-table: true
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    minItems: 1
+    maxItems: 2
+
+  operating-points-v2: true
+
+  "#cooling-cells":
+    const: 2
+
+  dma-coherent: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: allwinner,sun50i-h6-mali
+    then:
+      properties:
+        clocks:
+          minItems: 2
+      required:
+        - clock-names
+        - resets
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: amlogic,meson-gxm-mali
+    then:
+      properties:
+        resets:
+          minItems: 2
+      required:
+        - resets
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    gpu@ffa30000 {
+      compatible = "rockchip,rk3288-mali", "arm,mali-t760";
+      reg = <0xffa30000 0x10000>;
+      interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+             <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+             <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "job", "mmu", "gpu";
+      clocks = <&cru 0>;
+      mali-supply = <&vdd_gpu>;
+      operating-points-v2 = <&gpu_opp_table>;
+      power-domains = <&power 0>;
+      #cooling-cells = <2>;
+    };
+
+    gpu_opp_table: opp_table0 {
+      compatible = "operating-points-v2";
+
+      opp-533000000 {
+        opp-hz = /bits/ 64 <533000000>;
+        opp-microvolt = <1250000>;
+      };
+      opp-450000000 {
+        opp-hz = /bits/ 64 <450000000>;
+        opp-microvolt = <1150000>;
+      };
+      opp-400000000 {
+        opp-hz = /bits/ 64 <400000000>;
+        opp-microvolt = <1125000>;
+      };
+      opp-350000000 {
+        opp-hz = /bits/ 64 <350000000>;
+        opp-microvolt = <1075000>;
+      };
+      opp-266000000 {
+        opp-hz = /bits/ 64 <266000000>;
+        opp-microvolt = <1025000>;
+      };
+      opp-160000000 {
+        opp-hz = /bits/ 64 <160000000>;
+        opp-microvolt = <925000>;
+      };
+      opp-100000000 {
+        opp-hz = /bits/ 64 <100000000>;
+        opp-microvolt = <912500>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
new file mode 100644
index 000000000..eceaa176b
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
@@ -0,0 +1,179 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpu/arm,mali-utgard.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Mali Utgard GPU
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+  - Maxime Ripard <mripard@kernel.org>
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  $nodename:
+    pattern: '^gpu@[a-f0-9]+$'
+  compatible:
+    oneOf:
+      - items:
+          - const: allwinner,sun8i-a23-mali
+          - const: allwinner,sun7i-a20-mali
+          - const: arm,mali-400
+      - items:
+          - enum:
+              - allwinner,sun4i-a10-mali
+              - allwinner,sun7i-a20-mali
+              - allwinner,sun8i-h3-mali
+              - allwinner,sun8i-r40-mali
+              - allwinner,sun50i-a64-mali
+              - rockchip,rk3036-mali
+              - rockchip,rk3066-mali
+              - rockchip,rk3188-mali
+              - rockchip,rk3228-mali
+              - samsung,exynos4210-mali
+              - stericsson,db8500-mali
+          - const: arm,mali-400
+      - items:
+          - enum:
+              - allwinner,sun50i-h5-mali
+              - amlogic,meson8-mali
+              - amlogic,meson8b-mali
+              - amlogic,meson-gxbb-mali
+              - amlogic,meson-gxl-mali
+              - hisilicon,hi6220-mali
+              - mediatek,mt7623-mali
+              - rockchip,rk3328-mali
+          - const: arm,mali-450
+
+      # "arm,mali-300"
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 4
+    maxItems: 20
+
+  interrupt-names:
+    allOf:
+      - additionalItems: true
+        minItems: 4
+        maxItems: 20
+        items:
+          # At least enforce the first 2 interrupts
+          - const: gp
+          - const: gpmmu
+      - items:
+          # Not ideal as any order and combination are allowed
+          enum:
+            - gp        # Geometry Processor interrupt
+            - gpmmu     # Geometry Processor MMU interrupt
+            - pp        # Pixel Processor broadcast interrupt (mali-450 only)
+            - pp0       # Pixel Processor X interrupt (X from 0 to 7)
+            - ppmmu0    # Pixel Processor X MMU interrupt (X from 0 to 7)
+            - pp1
+            - ppmmu1
+            - pp2
+            - ppmmu2
+            - pp3
+            - ppmmu3
+            - pp4
+            - ppmmu4
+            - pp5
+            - ppmmu5
+            - pp6
+            - ppmmu6
+            - pp7
+            - ppmmu7
+            - pmu       # Power Management Unit interrupt (optional)
+            - combined  # stericsson,db8500-mali only
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: bus
+      - const: core
+
+  memory-region: true
+
+  mali-supply: true
+
+  opp-table: true
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  operating-points-v2: true
+
+  "#cooling-cells":
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - allwinner,sun4i-a10-mali
+              - allwinner,sun7i-a20-mali
+              - allwinner,sun8i-r40-mali
+              - allwinner,sun50i-a64-mali
+              - allwinner,sun50i-h5-mali
+              - amlogic,meson8-mali
+              - amlogic,meson8b-mali
+              - hisilicon,hi6220-mali
+              - mediatek,mt7623-mali
+              - rockchip,rk3036-mali
+              - rockchip,rk3066-mali
+              - rockchip,rk3188-mali
+              - rockchip,rk3228-mali
+              - rockchip,rk3328-mali
+    then:
+      required:
+        - resets
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    mali: gpu@1c40000 {
+      compatible = "allwinner,sun7i-a20-mali", "arm,mali-400";
+      reg = <0x01c40000 0x10000>;
+      interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+             <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+             <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+             <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+             <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+             <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+             <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "gp",
+            "gpmmu",
+            "pp0",
+            "ppmmu0",
+            "pp1",
+            "ppmmu1",
+            "pmu";
+      clocks = <&ccu 1>, <&ccu 2>;
+      clock-names = "bus", "core";
+      resets = <&ccu 1>;
+      #cooling-cells = <2>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/gpu/aspeed-gfx.txt b/Documentation/devicetree/bindings/gpu/aspeed-gfx.txt
new file mode 100644
index 000000000..958bdf962
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/aspeed-gfx.txt
@@ -0,0 +1,41 @@
+Device tree configuration for the GFX display device on the ASPEED SoCs
+
+Required properties:
+  - compatible
+    * Must be one of the following:
+      + aspeed,ast2500-gfx
+      + aspeed,ast2400-gfx
+    * In addition, the ASPEED pinctrl bindings require the 'syscon' property to
+      be present
+
+  - reg: Physical base address and length of the GFX registers
+
+  - interrupts: interrupt number for the GFX device
+
+  - clocks: clock number used to generate the pixel clock
+
+  - resets: reset line that must be released to use the GFX device
+
+  - memory-region:
+    Phandle to a memory region to allocate from, as defined in
+    Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
+
+
+Example:
+
+gfx: display@1e6e6000 {
+	compatible = "aspeed,ast2500-gfx", "syscon";
+	reg = <0x1e6e6000 0x1000>;
+	reg-io-width = <4>;
+	clocks = <&syscon ASPEED_CLK_GATE_D1CLK>;
+	resets = <&syscon ASPEED_RESET_CRT1>;
+	interrupts = <0x19>;
+	memory-region = <&gfx_memory>;
+};
+
+gfx_memory: framebuffer {
+	size = <0x01000000>;
+	alignment = <0x01000000>;
+	compatible = "shared-dma-pool";
+	reusable;
+};
diff --git a/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt b/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt
new file mode 100644
index 000000000..b2df82b44
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt
@@ -0,0 +1,33 @@
+Broadcom V3D GPU
+
+Only the Broadcom V3D 3.x and newer GPUs are covered by this binding.
+For V3D 2.x, see brcm,bcm-vc4.txt.
+
+Required properties:
+- compatible:	Should be "brcm,7268-v3d" or "brcm,7278-v3d"
+- reg:		Physical base addresses and lengths of the register areas
+- reg-names:	Names for the register areas.  The "hub" and "core0"
+		  register areas are always required.  The "gca" register area
+		  is required if the GCA cache controller is present.  The
+		  "bridge" register area is required if an external reset
+		  controller is not present.
+- interrupts:	The interrupt numbers.  The first interrupt is for the hub,
+		  while the following interrupts are separate interrupt lines
+		  for the cores (if they don't share the hub's interrupt).
+		  See bindings/interrupt-controller/interrupts.txt
+
+Optional properties:
+- clocks:	The core clock the unit runs on
+- resets:	The reset line for v3d, if not using a mapping of the bridge
+		  See bindings/reset/reset.txt
+
+v3d {
+	compatible = "brcm,7268-v3d";
+	reg = <0xf1204000 0x100>,
+	      <0xf1200000 0x4000>,
+	      <0xf1208000 0x4000>,
+	      <0xf1204100 0x100>;
+	reg-names = "bridge", "hub", "core0", "gca";
+	interrupts = <0 78 4>,
+		     <0 77 4>;
+};
diff --git a/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt b/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt
new file mode 100644
index 000000000..662a3c8a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt
@@ -0,0 +1,115 @@
+NVIDIA Tegra Graphics Processing Units
+
+Required properties:
+- compatible: "nvidia,<gpu>"
+  Currently recognized values:
+  - nvidia,gk20a
+  - nvidia,gm20b
+  - nvidia,gp10b
+  - nvidia,gv11b
+- reg: Physical base address and length of the controller's registers.
+  Must contain two entries:
+  - first entry for bar0
+  - second entry for bar1
+- interrupts: Must contain an entry for each entry in interrupt-names.
+  See ../interrupt-controller/interrupts.txt for details.
+- interrupt-names: Must include the following entries:
+  - stall
+  - nonstall
+- vdd-supply: regulator for supply voltage. Only required for GPUs not using
+  power domains.
+- clocks: Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+  - gpu
+  - pwr
+If the compatible string is "nvidia,gm20b", then the following clock
+is also required:
+  - ref
+If the compatible string is "nvidia,gv11b", then the following clock is also
+required:
+  - fuse
+- resets: Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+  - gpu
+- power-domains: GPUs that make use of power domains can define this property
+  instead of vdd-supply. Currently "nvidia,gp10b" makes use of this.
+
+Optional properties:
+- iommus: A reference to the IOMMU. See ../iommu/iommu.txt for details.
+
+Example for GK20A:
+
+	gpu@57000000 {
+		compatible = "nvidia,gk20a";
+		reg = <0x0 0x57000000 0x0 0x01000000>,
+		      <0x0 0x58000000 0x0 0x01000000>;
+		interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "stall", "nonstall";
+		vdd-supply = <&vdd_gpu>;
+		clocks = <&tegra_car TEGRA124_CLK_GPU>,
+			 <&tegra_car TEGRA124_CLK_PLL_P_OUT5>;
+		clock-names = "gpu", "pwr";
+		resets = <&tegra_car 184>;
+		reset-names = "gpu";
+		iommus = <&mc TEGRA_SWGROUP_GPU>;
+	};
+
+Example for GM20B:
+
+	gpu@57000000 {
+		compatible = "nvidia,gm20b";
+		reg = <0x0 0x57000000 0x0 0x01000000>,
+		      <0x0 0x58000000 0x0 0x01000000>;
+		interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "stall", "nonstall";
+		clocks = <&tegra_car TEGRA210_CLK_GPU>,
+			 <&tegra_car TEGRA210_CLK_PLL_P_OUT5>,
+			 <&tegra_car TEGRA210_CLK_PLL_G_REF>;
+		clock-names = "gpu", "pwr", "ref";
+		resets = <&tegra_car 184>;
+		reset-names = "gpu";
+		iommus = <&mc TEGRA_SWGROUP_GPU>;
+	};
+
+Example for GP10B:
+
+	gpu@17000000 {
+		compatible = "nvidia,gp10b";
+		reg = <0x0 0x17000000 0x0 0x1000000>,
+		      <0x0 0x18000000 0x0 0x1000000>;
+		interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "stall", "nonstall";
+		clocks = <&bpmp TEGRA186_CLK_GPCCLK>,
+			 <&bpmp TEGRA186_CLK_GPU>;
+		clock-names = "gpu", "pwr";
+		resets = <&bpmp TEGRA186_RESET_GPU>;
+		reset-names = "gpu";
+		power-domains = <&bpmp TEGRA186_POWER_DOMAIN_GPU>;
+		iommus = <&smmu TEGRA186_SID_GPU>;
+	};
+
+Example for GV11B:
+
+	gpu@17000000 {
+		compatible = "nvidia,gv11b";
+		reg = <0x17000000 0x10000000>,
+		      <0x18000000 0x10000000>;
+		interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "stall", "nonstall";
+		clocks = <&bpmp TEGRA194_CLK_GPCCLK>,
+			 <&bpmp TEGRA194_CLK_GPU_PWR>,
+			 <&bpmp TEGRA194_CLK_FUSE>;
+		clock-names = "gpu", "pwr", "fuse";
+		resets = <&bpmp TEGRA194_RESET_GPU>;
+		reset-names = "gpu";
+		dma-coherent;
+
+		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_GPU>;
+		iommus = <&smmu TEGRA194_SID_GPU>;
+	};
diff --git a/Documentation/devicetree/bindings/gpu/samsung-g2d.yaml b/Documentation/devicetree/bindings/gpu/samsung-g2d.yaml
new file mode 100644
index 000000000..e7daae862
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/samsung-g2d.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpu/samsung-g2d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung SoC 2D Graphics Accelerator
+
+maintainers:
+  - Inki Dae <inki.dae@samsung.com>
+
+properties:
+  compatible:
+    enum:
+      - samsung,s5pv210-g2d    # in S5PV210 & Exynos4210 SoC
+      - samsung,exynos4212-g2d # in Exynos4x12 SoCs
+      - samsung,exynos5250-g2d
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks: {}
+  clock-names: {}
+  iommus: {}
+  power-domains: {}
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: samsung,exynos5250-g2d
+
+then:
+  properties:
+    clocks:
+      items:
+        - description: fimg2d clock
+    clock-names:
+      items:
+        - const: fimg2d
+
+else:
+  properties:
+    clocks:
+      items:
+        - description: sclk_fimg2d clock
+        - description: fimg2d clock
+    clock-names:
+      items:
+        - const: sclk_fimg2d
+        - const: fimg2d
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    g2d@12800000 {
+        compatible = "samsung,s5pv210-g2d";
+        reg = <0x12800000 0x1000>;
+        interrupts = <0 89 0>;
+        clocks = <&clock 177>, <&clock 277>;
+        clock-names = "sclk_fimg2d", "fimg2d";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml b/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml
new file mode 100644
index 000000000..62486f551
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpu/samsung-rotator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung SoC Image Rotator
+
+maintainers:
+  - Inki Dae <inki.dae@samsung.com>
+
+properties:
+  compatible:
+    enum:
+      - "samsung,s5pv210-rotator"
+      - "samsung,exynos4210-rotator"
+      - "samsung,exynos4212-rotator"
+      - "samsung,exynos5250-rotator"
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: rotator
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    rotator@12810000 {
+        compatible = "samsung,exynos4210-rotator";
+        reg = <0x12810000 0x1000>;
+        interrupts = <0 83 0>;
+        clocks = <&clock 278>;
+        clock-names = "rotator";
+    };
+
diff --git a/Documentation/devicetree/bindings/gpu/samsung-scaler.yaml b/Documentation/devicetree/bindings/gpu/samsung-scaler.yaml
new file mode 100644
index 000000000..5317ac644
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/samsung-scaler.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpu/samsung-scaler.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC Image Scaler
+
+maintainers:
+  - Inki Dae <inki.dae@samsung.com>
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos5420-scaler
+      - samsung,exynos5433-scaler
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks: {}
+  clock-names: {}
+  iommus: {}
+  power-domains: {}
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: samsung,exynos5420-scaler
+
+then:
+  properties:
+    clocks:
+      items:
+        - description: mscl clock
+
+    clock-names:
+      items:
+        - const: mscl
+
+else:
+  properties:
+    clocks:
+      items:
+        - description: pclk clock
+        - description: aclk clock
+        - description: aclk_xiu clock
+
+    clock-names:
+      items:
+        - const: pclk
+        - const: aclk
+        - const: aclk_xiu
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5420.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    scaler@12800000 {
+        compatible = "samsung,exynos5420-scaler";
+        reg = <0x12800000 0x1294>;
+        interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clock CLK_MSCL0>;
+        clock-names = "mscl";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/gpu/vivante,gc.yaml b/Documentation/devicetree/bindings/gpu/vivante,gc.yaml
new file mode 100644
index 000000000..3ed172629
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/vivante,gc.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpu/vivante,gc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Vivante GPU Bindings
+
+description: Vivante GPU core devices
+
+maintainers:
+  - Lucas Stach <l.stach@pengutronix.de>
+
+properties:
+  compatible:
+    const: vivante,gc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#cooling-cells':
+    const: 2
+
+  assigned-clock-parents: true
+  assigned-clock-rates: true
+  assigned-clocks: true
+
+  clocks:
+    items:
+      - description: AXI/master interface clock
+      - description: GPU core clock
+      - description: Shader clock (only required if GPU has feature PIPE_3D)
+      - description: AHB/slave interface clock (only required if GPU can gate
+          slave interface independently)
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    items:
+      enum: [ bus, core, shader, reg ]
+    minItems: 1
+    maxItems: 4
+
+  resets:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx6qdl-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    gpu@130000 {
+      compatible = "vivante,gc";
+      reg = <0x00130000 0x4000>;
+      interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&clks IMX6QDL_CLK_GPU3D_AXI>,
+               <&clks IMX6QDL_CLK_GPU3D_CORE>,
+               <&clks IMX6QDL_CLK_GPU3D_SHADER>;
+      clock-names = "bus", "core", "shader";
+      power-domains = <&gpc 1>;
+    };
+
+...