Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 61 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/reset/uniphier-reset.txt b/Documentation/devicetree/bindings/reset/uniphier-reset.txt
new file mode 100644
index 000000000..88e06e5e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/uniphier-reset.txt
@@ -0,0 +1,61 @@
+UniPhier glue reset controller
+
+
+Peripheral core reset in glue layer
+-----------------------------------
+
+Some peripheral core reset belongs to its own glue layer. Before using
+this core reset, it is necessary to control the clocks and resets to enable
+this layer. These clocks and resets should be described in each property.
+
+Required properties:
+- compatible: Should be
+    "socionext,uniphier-pro4-usb3-reset" - for Pro4 SoC USB3
+    "socionext,uniphier-pro5-usb3-reset" - for Pro5 SoC USB3
+    "socionext,uniphier-pxs2-usb3-reset" - for PXs2 SoC USB3
+    "socionext,uniphier-ld20-usb3-reset" - for LD20 SoC USB3
+    "socionext,uniphier-pxs3-usb3-reset" - for PXs3 SoC USB3
+    "socionext,uniphier-pro4-ahci-reset" - for Pro4 SoC AHCI
+    "socionext,uniphier-pxs2-ahci-reset" - for PXs2 SoC AHCI
+    "socionext,uniphier-pxs3-ahci-reset" - for PXs3 SoC AHCI
+- #reset-cells: Should be 1.
+- reg: Specifies offset and length of the register set for the device.
+- clocks: A list of phandles to the clock gate for the glue layer.
+	According to the clock-names, appropriate clocks are required.
+- clock-names: Should contain
+    "gio", "link" - for Pro4 and Pro5 SoCs
+    "link"        - for others
+- resets: A list of phandles to the reset control for the glue layer.
+	According to the reset-names, appropriate resets are required.
+- reset-names: Should contain
+    "gio", "link" - for Pro4 and Pro5 SoCs
+    "link"        - for others
+
+Example:
+
+	usb-glue@65b00000 {
+		compatible = "socionext,uniphier-ld20-dwc3-glue",
+			     "simple-mfd";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x65b00000 0x400>;
+
+		usb_rst: reset@0 {
+			compatible = "socionext,uniphier-ld20-usb3-reset";
+			reg = <0x0 0x4>;
+			#reset-cells = <1>;
+			clock-names = "link";
+			clocks = <&sys_clk 14>;
+			reset-names = "link";
+			resets = <&sys_rst 14>;
+		};
+
+		regulator {
+			...
+		};
+
+		phy {
+			...
+		};
+		...
+	};