Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 134 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
new file mode 100644
index 000000000..2e2f6dc35
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
@@ -0,0 +1,134 @@
+Qualcomm APR (Asynchronous Packet Router) binding
+
+This binding describes the Qualcomm APR. APR is a IPC protocol for
+communication between Application processor and QDSP. APR is mainly
+used for audio/voice services on the QDSP.
+
+- compatible:
+	Usage: required
+	Value type: <stringlist>
+	Definition: must be "qcom,apr-v<VERSION-NUMBER>", example "qcom,apr-v2"
+
+- qcom,apr-domain
+	Usage: required
+	Value type: <u32>
+	Definition: Destination processor ID.
+	Possible values are :
+			1 - APR simulator
+			2 - PC
+			3 - MODEM
+			4 - ADSP
+			5 - APPS
+			6 - MODEM2
+			7 - APPS2
+
+= APR SERVICES
+Each subnode of the APR node represents service tied to this apr. The name
+of the nodes are not important. The properties of these nodes are defined
+by the individual bindings for the specific service
+- All APR services MUST contain the following property:
+
+- reg
+	Usage: required
+	Value type: <u32>
+	Definition: APR Service ID
+	Possible values are :
+			3 - DSP Core Service
+			4 - Audio Front End Service.
+			5 - Voice Stream Manager Service.
+			6 - Voice processing manager.
+			7 - Audio Stream Manager Service.
+			8 - Audio Device Manager Service.
+			9 - Multimode voice manager.
+			10 - Core voice stream.
+			11 - Core voice processor.
+			12 - Ultrasound stream manager.
+			13 - Listen stream manager.
+
+- qcom,protection-domain
+	Usage: optional
+	Value type: <stringlist>
+	Definition: Must list the protection domain service name and path
+		    that the particular apr service has a dependency on.
+	Possible values are :
+			"avs/audio", "msm/adsp/audio_pd".
+			"kernel/elf_loader", "msm/modem/wlan_pd".
+			"tms/servreg", "msm/adsp/audio_pd".
+			"tms/servreg", "msm/modem/wlan_pd".
+			"tms/servreg", "msm/slpi/sensor_pd".
+
+= EXAMPLE
+The following example represents a QDSP based sound card on a MSM8996 device
+which uses apr as communication between Apps and QDSP.
+
+	apr {
+		compatible = "qcom,apr-v2";
+		qcom,apr-domain = <APR_DOMAIN_ADSP>;
+
+		apr-service@3 {
+			compatible = "qcom,q6core";
+			reg = <APR_SVC_ADSP_CORE>;
+		};
+
+		apr-service@4 {
+			compatible = "qcom,q6afe";
+			reg = <APR_SVC_AFE>;
+
+			dais {
+				#sound-dai-cells = <1>;
+				dai@1 {
+					reg = <HDMI_RX>;
+				};
+			};
+		};
+
+		apr-service@7 {
+			compatible = "qcom,q6asm";
+			reg = <APR_SVC_ASM>;
+			...
+		};
+
+		apr-service@8 {
+			compatible = "qcom,q6adm";
+			reg = <APR_SVC_ADM>;
+			...
+		};
+	};
+
+= EXAMPLE 2
+The following example represents a QDSP based sound card with protection domain
+dependencies specified. Here some of the apr services are dependent on services
+running on protection domain hosted on ADSP/SLPI remote processors while others
+have no such dependency.
+
+	apr {
+		compatible = "qcom,apr-v2";
+		qcom,glink-channels = "apr_audio_svc";
+		qcom,apr-domain = <APR_DOMAIN_ADSP>;
+
+		apr-service@3 {
+			compatible = "qcom,q6core";
+			reg = <APR_SVC_ADSP_CORE>;
+		};
+
+		q6afe: apr-service@4 {
+			compatible = "qcom,q6afe";
+			reg = <APR_SVC_AFE>;
+			qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+			...
+		};
+
+		q6asm: apr-service@7 {
+			compatible = "qcom,q6asm";
+			reg = <APR_SVC_ASM>;
+			qcom,protection-domain = "tms/servreg", "msm/slpi/sensor_pd";
+			...
+		};
+
+		q6adm: apr-service@8 {
+			compatible = "qcom,q6adm";
+			reg = <APR_SVC_ADM>;
+			qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+			...
+		};
+	};