Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 102 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/usb/usb-device.txt b/Documentation/devicetree/bindings/usb/usb-device.txt
new file mode 100644
index 000000000..036be172b
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/usb-device.txt
@@ -0,0 +1,102 @@
+Generic USB Device Properties
+
+Usually, we only use device tree for hard wired USB device.
+The reference binding doc is from:
+http://www.devicetree.org/open-firmware/bindings/usb/usb-1_0.ps
+
+Four types of device-tree nodes are defined: "host-controller nodes"
+representing USB host controllers, "device nodes" representing USB devices,
+"interface nodes" representing USB interfaces and "combined nodes"
+representing simple USB devices.
+
+A combined node shall be used instead of a device node and an interface node
+for devices of class 0 or 9 (hub) with a single configuration and a single
+interface.
+
+A "hub node" is a combined node or an interface node that represents a USB
+hub.
+
+
+Required properties for device nodes:
+- compatible: "usbVID,PID", where VID is the vendor id and PID the product id.
+  The textual representation of VID and PID shall be in lower case hexadecimal
+  with leading zeroes suppressed. The other compatible strings from the above
+  standard binding could also be used, but a device adhering to this binding
+  may leave out all except for "usbVID,PID".
+- reg: the number of the USB hub port or the USB host-controller port to which
+  this device is attached. The range is 1-255.
+
+
+Required properties for device nodes with interface nodes:
+- #address-cells: shall be 2
+- #size-cells: shall be 0
+
+
+Required properties for interface nodes:
+- compatible: "usbifVID,PID.configCN.IN", where VID is the vendor id, PID is
+  the product id, CN is the configuration value and IN is the interface
+  number. The textual representation of VID, PID, CN and IN shall be in lower
+  case hexadecimal with leading zeroes suppressed. The other compatible
+  strings from the above standard binding could also be used, but a device
+  adhering to this binding may leave out all except for
+  "usbifVID,PID.configCN.IN".
+- reg: the interface number and configuration value
+
+The configuration component is not included in the textual representation of
+an interface-node unit address for configuration 1.
+
+
+Required properties for combined nodes:
+- compatible: "usbVID,PID", where VID is the vendor id and PID the product id.
+  The textual representation of VID and PID shall be in lower case hexadecimal
+  with leading zeroes suppressed. The other compatible strings from the above
+  standard binding could also be used, but a device adhering to this binding
+  may leave out all except for "usbVID,PID".
+- reg: the number of the USB hub port or the USB host-controller port to which
+  this device is attached. The range is 1-255.
+
+
+Required properties for hub nodes with device nodes:
+- #address-cells: shall be 1
+- #size-cells: shall be 0
+
+
+Required properties for host-controller nodes with device nodes:
+- #address-cells: shall be 1
+- #size-cells: shall be 0
+
+
+Example:
+
+&usb1 {	/* host controller */
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	hub@1 {		/* hub connected to port 1 */
+		compatible = "usb5e3,608";
+		reg = <1>;
+	};
+
+	device@2 {	/* device connected to port 2 */
+		compatible = "usb123,4567";
+		reg = <2>;
+	};
+
+	device@3 { 	/* device connected to port 3 */
+		compatible = "usb123,abcd";
+		reg = <3>;
+
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		interface@0 {	/* interface 0 of configuration 1 */
+			compatible = "usbif123,abcd.config1.0";
+			reg = <0 1>;
+		};
+
+		interface@0,2 {	/* interface 0 of configuration 2 */
+			compatible = "usbif123,abcd.config2.0";
+			reg = <0 2>;
+		};
+	};
+};