Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 80 insertions, 0 deletions

diff --git a/Documentation/hwmon/emc1403.rst b/Documentation/hwmon/emc1403.rst
new file mode 100644
index 000000000..0de9616b2
--- /dev/null
+++ b/Documentation/hwmon/emc1403.rst
@@ -0,0 +1,80 @@
+Kernel driver emc1403
+=====================
+
+Supported chips:
+
+  * SMSC / Microchip EMC1402, EMC1412
+
+    Addresses scanned: I2C 0x18, 0x1c, 0x29, 0x4c, 0x4d, 0x5c
+
+    Prefix: 'emc1402'
+
+    Datasheets:
+
+	- http://ww1.microchip.com/downloads/en/DeviceDoc/1412.pdf
+	- https://ww1.microchip.com/downloads/en/DeviceDoc/1402.pdf
+
+  * SMSC / Microchip EMC1403, EMC1404, EMC1413, EMC1414
+
+    Addresses scanned: I2C 0x18, 0x29, 0x4c, 0x4d
+
+    Prefix: 'emc1403', 'emc1404'
+
+    Datasheets:
+
+	- http://ww1.microchip.com/downloads/en/DeviceDoc/1403_1404.pdf
+	- http://ww1.microchip.com/downloads/en/DeviceDoc/1413_1414.pdf
+
+  * SMSC / Microchip EMC1422
+
+    Addresses scanned: I2C 0x4c
+
+    Prefix: 'emc1422'
+
+    Datasheet:
+
+	- https://ww1.microchip.com/downloads/en/DeviceDoc/1422.pdf
+
+  * SMSC / Microchip EMC1423, EMC1424
+
+    Addresses scanned: I2C 0x4c
+
+    Prefix: 'emc1423', 'emc1424'
+
+    Datasheet:
+
+	- https://ww1.microchip.com/downloads/en/DeviceDoc/1423_1424.pdf
+
+Author:
+    Kalhan Trisal <kalhan.trisal@intel.com
+
+
+Description
+-----------
+
+The Standard Microsystems Corporation (SMSC) / Microchip EMC14xx chips
+contain up to four temperature sensors. EMC14x2 support two sensors
+(one internal, one external). EMC14x3 support three sensors (one internal,
+two external), and EMC14x4 support four sensors (one internal, three
+external).
+
+The chips implement three limits for each sensor: low (tempX_min), high
+(tempX_max) and critical (tempX_crit.) The chips also implement an
+hysteresis mechanism which applies to all limits. The relative difference
+is stored in a single register on the chip, which means that the relative
+difference between the limit and its hysteresis is always the same for
+all three limits.
+
+This implementation detail implies the following:
+
+* When setting a limit, its hysteresis will automatically follow, the
+  difference staying unchanged. For example, if the old critical limit
+  was 80 degrees C, and the hysteresis was 75 degrees C, and you change
+  the critical limit to 90 degrees C, then the hysteresis will
+  automatically change to 85 degrees C.
+* The hysteresis values can't be set independently. We decided to make
+  only temp1_crit_hyst writable, while all other hysteresis attributes
+  are read-only. Setting temp1_crit_hyst writes the difference between
+  temp1_crit_hyst and temp1_crit into the chip, and the same relative
+  hysteresis applies automatically to all other limits.
+* The limits should be set before the hysteresis.