Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 157 insertions, 0 deletions

diff --git a/Documentation/powerpc/ptrace.rst b/Documentation/powerpc/ptrace.rst
new file mode 100644
index 000000000..77725d69e
--- /dev/null
+++ b/Documentation/powerpc/ptrace.rst
@@ -0,0 +1,157 @@
+======
+Ptrace
+======
+
+GDB intends to support the following hardware debug features of BookE
+processors:
+
+4 hardware breakpoints (IAC)
+2 hardware watchpoints (read, write and read-write) (DAC)
+2 value conditions for the hardware watchpoints (DVC)
+
+For that, we need to extend ptrace so that GDB can query and set these
+resources. Since we're extending, we're trying to create an interface
+that's extendable and that covers both BookE and server processors, so
+that GDB doesn't need to special-case each of them. We added the
+following 3 new ptrace requests.
+
+1. PTRACE_PPC_GETHWDEBUGINFO
+============================
+
+Query for GDB to discover the hardware debug features. The main info to
+be returned here is the minimum alignment for the hardware watchpoints.
+BookE processors don't have restrictions here, but server processors have
+an 8-byte alignment restriction for hardware watchpoints. We'd like to avoid
+adding special cases to GDB based on what it sees in AUXV.
+
+Since we're at it, we added other useful info that the kernel can return to
+GDB: this query will return the number of hardware breakpoints, hardware
+watchpoints and whether it supports a range of addresses and a condition.
+The query will fill the following structure provided by the requesting process::
+
+  struct ppc_debug_info {
+       unit32_t version;
+       unit32_t num_instruction_bps;
+       unit32_t num_data_bps;
+       unit32_t num_condition_regs;
+       unit32_t data_bp_alignment;
+       unit32_t sizeof_condition; /* size of the DVC register */
+       uint64_t features; /* bitmask of the individual flags */
+  };
+
+features will have bits indicating whether there is support for::
+
+  #define PPC_DEBUG_FEATURE_INSN_BP_RANGE		0x1
+  #define PPC_DEBUG_FEATURE_INSN_BP_MASK		0x2
+  #define PPC_DEBUG_FEATURE_DATA_BP_RANGE		0x4
+  #define PPC_DEBUG_FEATURE_DATA_BP_MASK		0x8
+  #define PPC_DEBUG_FEATURE_DATA_BP_DAWR		0x10
+  #define PPC_DEBUG_FEATURE_DATA_BP_ARCH_31		0x20
+
+2. PTRACE_SETHWDEBUG
+
+Sets a hardware breakpoint or watchpoint, according to the provided structure::
+
+  struct ppc_hw_breakpoint {
+        uint32_t version;
+  #define PPC_BREAKPOINT_TRIGGER_EXECUTE  0x1
+  #define PPC_BREAKPOINT_TRIGGER_READ     0x2
+ #define PPC_BREAKPOINT_TRIGGER_WRITE    0x4
+        uint32_t trigger_type;       /* only some combinations allowed */
+  #define PPC_BREAKPOINT_MODE_EXACT               0x0
+  #define PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE     0x1
+  #define PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE     0x2
+  #define PPC_BREAKPOINT_MODE_MASK                0x3
+        uint32_t addr_mode;          /* address match mode */
+
+  #define PPC_BREAKPOINT_CONDITION_MODE   0x3
+  #define PPC_BREAKPOINT_CONDITION_NONE   0x0
+  #define PPC_BREAKPOINT_CONDITION_AND    0x1
+  #define PPC_BREAKPOINT_CONDITION_EXACT  0x1	/* different name for the same thing as above */
+  #define PPC_BREAKPOINT_CONDITION_OR     0x2
+  #define PPC_BREAKPOINT_CONDITION_AND_OR 0x3
+  #define PPC_BREAKPOINT_CONDITION_BE_ALL 0x00ff0000	/* byte enable bits */
+  #define PPC_BREAKPOINT_CONDITION_BE(n)  (1<<((n)+16))
+        uint32_t condition_mode;     /* break/watchpoint condition flags */
+
+        uint64_t addr;
+        uint64_t addr2;
+        uint64_t condition_value;
+  };
+
+A request specifies one event, not necessarily just one register to be set.
+For instance, if the request is for a watchpoint with a condition, both the
+DAC and DVC registers will be set in the same request.
+
+With this GDB can ask for all kinds of hardware breakpoints and watchpoints
+that the BookE supports. COMEFROM breakpoints available in server processors
+are not contemplated, but that is out of the scope of this work.
+
+ptrace will return an integer (handle) uniquely identifying the breakpoint or
+watchpoint just created. This integer will be used in the PTRACE_DELHWDEBUG
+request to ask for its removal. Return -ENOSPC if the requested breakpoint
+can't be allocated on the registers.
+
+Some examples of using the structure to:
+
+- set a breakpoint in the first breakpoint register::
+
+    p.version         = PPC_DEBUG_CURRENT_VERSION;
+    p.trigger_type    = PPC_BREAKPOINT_TRIGGER_EXECUTE;
+    p.addr_mode       = PPC_BREAKPOINT_MODE_EXACT;
+    p.condition_mode  = PPC_BREAKPOINT_CONDITION_NONE;
+    p.addr            = (uint64_t) address;
+    p.addr2           = 0;
+    p.condition_value = 0;
+
+- set a watchpoint which triggers on reads in the second watchpoint register::
+
+    p.version         = PPC_DEBUG_CURRENT_VERSION;
+    p.trigger_type    = PPC_BREAKPOINT_TRIGGER_READ;
+    p.addr_mode       = PPC_BREAKPOINT_MODE_EXACT;
+    p.condition_mode  = PPC_BREAKPOINT_CONDITION_NONE;
+    p.addr            = (uint64_t) address;
+    p.addr2           = 0;
+    p.condition_value = 0;
+
+- set a watchpoint which triggers only with a specific value::
+
+    p.version         = PPC_DEBUG_CURRENT_VERSION;
+    p.trigger_type    = PPC_BREAKPOINT_TRIGGER_READ;
+    p.addr_mode       = PPC_BREAKPOINT_MODE_EXACT;
+    p.condition_mode  = PPC_BREAKPOINT_CONDITION_AND | PPC_BREAKPOINT_CONDITION_BE_ALL;
+    p.addr            = (uint64_t) address;
+    p.addr2           = 0;
+    p.condition_value = (uint64_t) condition;
+
+- set a ranged hardware breakpoint::
+
+    p.version         = PPC_DEBUG_CURRENT_VERSION;
+    p.trigger_type    = PPC_BREAKPOINT_TRIGGER_EXECUTE;
+    p.addr_mode       = PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE;
+    p.condition_mode  = PPC_BREAKPOINT_CONDITION_NONE;
+    p.addr            = (uint64_t) begin_range;
+    p.addr2           = (uint64_t) end_range;
+    p.condition_value = 0;
+
+- set a watchpoint in server processors (BookS)::
+
+    p.version         = 1;
+    p.trigger_type    = PPC_BREAKPOINT_TRIGGER_RW;
+    p.addr_mode       = PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE;
+    or
+    p.addr_mode       = PPC_BREAKPOINT_MODE_EXACT;
+
+    p.condition_mode  = PPC_BREAKPOINT_CONDITION_NONE;
+    p.addr            = (uint64_t) begin_range;
+    /* For PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE addr2 needs to be specified, where
+     * addr2 - addr <= 8 Bytes.
+     */
+    p.addr2           = (uint64_t) end_range;
+    p.condition_value = 0;
+
+3. PTRACE_DELHWDEBUG
+
+Takes an integer which identifies an existing breakpoint or watchpoint
+(i.e., the value returned from PTRACE_SETHWDEBUG), and deletes the
+corresponding breakpoint or watchpoint..