Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 760 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
new file mode 100644
index 000000000..093567022
--- /dev/null
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -0,0 +1,760 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/clock/rk3036-cru.h>
+#include <dt-bindings/soc/rockchip,boot-mode.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	compatible = "rockchip,rk3036";
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		mshc0 = &emmc;
+		mshc1 = &sdmmc;
+		mshc2 = &sdio;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		spi = &spi;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "rockchip,rk3036-smp";
+
+		cpu0: cpu@f00 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf00>;
+			resets = <&cru SRST_CORE0>;
+			operating-points = <
+				/* KHz    uV */
+				 816000 1000000
+			>;
+			clock-latency = <40000>;
+			clocks = <&cru ARMCLK>;
+		};
+
+		cpu1: cpu@f01 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf01>;
+			resets = <&cru SRST_CORE1>;
+		};
+	};
+
+	amba: bus {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		pdma: pdma@20078000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x20078000 0x4000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			arm,pl330-broken-no-flushp;
+			arm,pl330-periph-burst;
+			clocks = <&cru ACLK_DMAC2>;
+			clock-names = "apb_pclk";
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+
+	display-subsystem {
+		compatible = "rockchip,display-subsystem";
+		ports = <&vop_out>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		arm,cpu-registers-not-fw-configured;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+		clock-frequency = <24000000>;
+	};
+
+	xin24m: oscillator {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xin24m";
+		#clock-cells = <0>;
+	};
+
+	bus_intmem: sram@10080000 {
+		compatible = "mmio-sram";
+		reg = <0x10080000 0x2000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x10080000 0x2000>;
+
+		smp-sram@0 {
+			compatible = "rockchip,rk3066-smp-sram";
+			reg = <0x00 0x10>;
+		};
+	};
+
+	gpu: gpu@10090000 {
+		compatible = "rockchip,rk3036-mali", "arm,mali-400";
+		reg = <0x10090000 0x10000>;
+		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "gp",
+				  "gpmmu",
+				  "pp0",
+				  "ppmmu0";
+		assigned-clocks = <&cru SCLK_GPU>;
+		assigned-clock-rates = <100000000>;
+		clocks = <&cru SCLK_GPU>, <&cru SCLK_GPU>;
+		clock-names = "bus", "core";
+		resets = <&cru SRST_GPU>;
+		status = "disabled";
+	};
+
+	vop: vop@10118000 {
+		compatible = "rockchip,rk3036-vop";
+		reg = <0x10118000 0x19c>;
+		interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_LCDC>, <&cru SCLK_LCDC>, <&cru HCLK_LCDC>;
+		clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+		resets = <&cru SRST_LCDC1_A>, <&cru SRST_LCDC1_H>, <&cru SRST_LCDC1_D>;
+		reset-names = "axi", "ahb", "dclk";
+		iommus = <&vop_mmu>;
+		status = "disabled";
+
+		vop_out: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			vop_out_hdmi: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&hdmi_in_vop>;
+			};
+		};
+	};
+
+	vop_mmu: iommu@10118300 {
+		compatible = "rockchip,iommu";
+		reg = <0x10118300 0x100>;
+		interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "vop_mmu";
+		clocks = <&cru ACLK_LCDC>, <&cru HCLK_LCDC>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	gic: interrupt-controller@10139000 {
+		compatible = "arm,gic-400";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+
+		reg = <0x10139000 0x1000>,
+		      <0x1013a000 0x2000>,
+		      <0x1013c000 0x2000>,
+		      <0x1013e000 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	usb_otg: usb@10180000 {
+		compatible = "rockchip,rk3036-usb", "rockchip,rk3066-usb",
+				"snps,dwc2";
+		reg = <0x10180000 0x40000>;
+		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_OTG0>;
+		clock-names = "otg";
+		dr_mode = "otg";
+		g-np-tx-fifo-size = <16>;
+		g-rx-fifo-size = <275>;
+		g-tx-fifo-size = <256 128 128 64 64 32>;
+		status = "disabled";
+	};
+
+	usb_host: usb@101c0000 {
+		compatible = "rockchip,rk3036-usb", "rockchip,rk3066-usb",
+				"snps,dwc2";
+		reg = <0x101c0000 0x40000>;
+		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_OTG1>;
+		clock-names = "otg";
+		dr_mode = "host";
+		status = "disabled";
+	};
+
+	emac: ethernet@10200000 {
+		compatible = "rockchip,rk3036-emac", "snps,arc-emac";
+		reg = <0x10200000 0x4000>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		rockchip,grf = <&grf>;
+		clocks = <&cru HCLK_MAC>, <&cru SCLK_MACREF>, <&cru SCLK_MAC>;
+		clock-names = "hclk", "macref", "macclk";
+		/*
+		 * Fix the emac parent clock is DPLL instead of APLL.
+		 * since that will cause some unstable things if the cpufreq
+		 * is working. (e.g: the accurate 50MHz what mac_ref need)
+		 */
+		assigned-clocks = <&cru SCLK_MACPLL>;
+		assigned-clock-parents = <&cru PLL_DPLL>;
+		max-speed = <100>;
+		phy-mode = "rmii";
+		status = "disabled";
+	};
+
+	sdmmc: mmc@10214000 {
+		compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x10214000 0x4000>;
+		clock-frequency = <37500000>;
+		max-frequency = <37500000>;
+		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>;
+		clock-names = "biu", "ciu";
+		fifo-depth = <0x100>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		resets = <&cru SRST_MMC0>;
+		reset-names = "reset";
+		status = "disabled";
+	};
+
+	sdio: mmc@10218000 {
+		compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x10218000 0x4000>;
+		max-frequency = <37500000>;
+		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
+			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		resets = <&cru SRST_SDIO>;
+		reset-names = "reset";
+		status = "disabled";
+	};
+
+	emmc: mmc@1021c000 {
+		compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x1021c000 0x4000>;
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+		bus-width = <8>;
+		cap-mmc-highspeed;
+		clock-frequency = <37500000>;
+		max-frequency = <37500000>;
+		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
+			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		rockchip,default-sample-phase = <158>;
+		disable-wp;
+		dmas = <&pdma 12>;
+		dma-names = "rx-tx";
+		fifo-depth = <0x100>;
+		mmc-ddr-1_8v;
+		non-removable;
+		pinctrl-names = "default";
+		pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+		resets = <&cru SRST_EMMC>;
+		reset-names = "reset";
+		status = "disabled";
+	};
+
+	i2s: i2s@10220000 {
+		compatible = "rockchip,rk3036-i2s", "rockchip,rk3066-i2s";
+		reg = <0x10220000 0x4000>;
+		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		clocks = <&cru SCLK_I2S>, <&cru HCLK_I2S>;
+		dmas = <&pdma 0>, <&pdma 1>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s_bus>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	cru: clock-controller@20000000 {
+		compatible = "rockchip,rk3036-cru";
+		reg = <0x20000000 0x1000>;
+		rockchip,grf = <&grf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+		assigned-clocks = <&cru PLL_GPLL>;
+		assigned-clock-rates = <594000000>;
+	};
+
+	grf: syscon@20008000 {
+		compatible = "rockchip,rk3036-grf", "syscon", "simple-mfd";
+		reg = <0x20008000 0x1000>;
+
+		reboot-mode {
+			compatible = "syscon-reboot-mode";
+			offset = <0x1d8>;
+			mode-normal = <BOOT_NORMAL>;
+			mode-recovery = <BOOT_RECOVERY>;
+			mode-bootloader = <BOOT_FASTBOOT>;
+			mode-loader = <BOOT_BL_DOWNLOAD>;
+		};
+	};
+
+	acodec: acodec-ana@20030000 {
+		compatible = "rk3036-codec";
+		reg = <0x20030000 0x4000>;
+		rockchip,grf = <&grf>;
+		clock-names = "acodec_pclk";
+		clocks = <&cru PCLK_ACODEC>;
+		status = "disabled";
+	};
+
+	hdmi: hdmi@20034000 {
+		compatible = "rockchip,rk3036-inno-hdmi";
+		reg = <0x20034000 0x4000>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru  PCLK_HDMI>;
+		clock-names = "pclk";
+		rockchip,grf = <&grf>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmi_ctl>;
+		status = "disabled";
+
+		hdmi_in: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			hdmi_in_vop: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&vop_out_hdmi>;
+			};
+		};
+	};
+
+	timer: timer@20044000 {
+		compatible = "rockchip,rk3036-timer", "rockchip,rk3288-timer";
+		reg = <0x20044000 0x20>;
+		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&xin24m>, <&cru PCLK_TIMER>;
+		clock-names = "timer", "pclk";
+	};
+
+	pwm0: pwm@20050000 {
+		compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
+		reg = <0x20050000 0x10>;
+		#pwm-cells = <3>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm0_pin>;
+		status = "disabled";
+	};
+
+	pwm1: pwm@20050010 {
+		compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
+		reg = <0x20050010 0x10>;
+		#pwm-cells = <3>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm1_pin>;
+		status = "disabled";
+	};
+
+	pwm2: pwm@20050020 {
+		compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
+		reg = <0x20050020 0x10>;
+		#pwm-cells = <3>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm2_pin>;
+		status = "disabled";
+	};
+
+	pwm3: pwm@20050030 {
+		compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
+		reg = <0x20050030 0x10>;
+		#pwm-cells = <2>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm3_pin>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@20056000 {
+		compatible = "rockchip,rk3036-i2c", "rockchip,rk3288-i2c";
+		reg = <0x20056000 0x1000>;
+		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c1_xfer>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@2005a000 {
+		compatible = "rockchip,rk3036-i2c", "rockchip,rk3288-i2c";
+		reg = <0x2005a000 0x1000>;
+		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_xfer>;
+		status = "disabled";
+	};
+
+	uart0: serial@20060000 {
+		compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
+		reg = <0x20060000 0x100>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+		status = "disabled";
+	};
+
+	uart1: serial@20064000 {
+		compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
+		reg = <0x20064000 0x100>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart1_xfer>;
+		status = "disabled";
+	};
+
+	uart2: serial@20068000 {
+		compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
+		reg = <0x20068000 0x100>;
+		interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart2_xfer>;
+		status = "disabled";
+	};
+
+	i2c0: i2c@20072000 {
+		compatible = "rockchip,rk3036-i2c", "rockchip,rk3288-i2c";
+		reg = <0x20072000 0x1000>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c0_xfer>;
+		status = "disabled";
+	};
+
+	spi: spi@20074000 {
+		compatible = "rockchip,rockchip-spi";
+		reg = <0x20074000 0x1000>;
+		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_SPI>, <&cru SCLK_SPI>;
+		clock-names = "apb-pclk","spi_pclk";
+		dmas = <&pdma 8>, <&pdma 9>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi_txd &spi_rxd &spi_clk &spi_cs0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	pinctrl: pinctrl {
+		compatible = "rockchip,rk3036-pinctrl";
+		rockchip,grf = <&grf>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gpio0: gpio0@2007c000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x2007c000 0x100>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO0>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio1@20080000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x20080000 0x100>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO1>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio2@20084000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x20084000 0x100>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO2>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pcfg_pull_default: pcfg_pull_default {
+			bias-pull-pin-default;
+		};
+
+		pcfg_pull_none: pcfg-pull-none {
+			bias-disable;
+		};
+
+		pwm0 {
+			pwm0_pin: pwm0-pin {
+				rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>;
+			};
+		};
+
+		pwm1 {
+			pwm1_pin: pwm1-pin {
+				rockchip,pins = <0 RK_PA1 2 &pcfg_pull_none>;
+			};
+		};
+
+		pwm2 {
+			pwm2_pin: pwm2-pin {
+				rockchip,pins = <0 RK_PA1 2 &pcfg_pull_none>;
+			};
+		};
+
+		pwm3 {
+			pwm3_pin: pwm3-pin {
+				rockchip,pins = <0 RK_PD3 1 &pcfg_pull_none>;
+			};
+		};
+
+		sdmmc {
+			sdmmc_clk: sdmmc-clk {
+				rockchip,pins = <1 RK_PC0 1 &pcfg_pull_none>;
+			};
+
+			sdmmc_cmd: sdmmc-cmd {
+				rockchip,pins = <1 RK_PB7 1 &pcfg_pull_default>;
+			};
+
+			sdmmc_cd: sdmmc-cd {
+				rockchip,pins = <1 RK_PC1 1 &pcfg_pull_default>;
+			};
+
+			sdmmc_bus1: sdmmc-bus1 {
+				rockchip,pins = <1 RK_PC2 1 &pcfg_pull_default>;
+			};
+
+			sdmmc_bus4: sdmmc-bus4 {
+				rockchip,pins = <1 RK_PC2 1 &pcfg_pull_default>,
+						<1 RK_PC3 1 &pcfg_pull_default>,
+						<1 RK_PC4 1 &pcfg_pull_default>,
+						<1 RK_PC5 1 &pcfg_pull_default>;
+			};
+		};
+
+		sdio {
+			sdio_bus1: sdio-bus1 {
+				rockchip,pins = <0 RK_PB3 1 &pcfg_pull_default>;
+			};
+
+			sdio_bus4: sdio-bus4 {
+				rockchip,pins = <0 RK_PB3 1 &pcfg_pull_default>,
+						<0 RK_PB4 1 &pcfg_pull_default>,
+						<0 RK_PB5 1 &pcfg_pull_default>,
+						<0 RK_PB6 1 &pcfg_pull_default>;
+			};
+
+			sdio_cmd: sdio-cmd {
+				rockchip,pins = <0 RK_PB0 1 &pcfg_pull_default>;
+			};
+
+			sdio_clk: sdio-clk {
+				rockchip,pins = <0 RK_PB1 1 &pcfg_pull_none>;
+			};
+		};
+
+		emmc {
+			/*
+			 * We run eMMC at max speed; bump up drive strength.
+			 * We also have external pulls, so disable the internal ones.
+			 */
+			emmc_clk: emmc-clk {
+				rockchip,pins = <2 RK_PA4 2 &pcfg_pull_none>;
+			};
+
+			emmc_cmd: emmc-cmd {
+				rockchip,pins = <2 RK_PA1 2 &pcfg_pull_default>;
+			};
+
+			emmc_bus8: emmc-bus8 {
+				rockchip,pins = <1 RK_PD0 2 &pcfg_pull_default>,
+						<1 RK_PD1 2 &pcfg_pull_default>,
+						<1 RK_PD2 2 &pcfg_pull_default>,
+						<1 RK_PD3 2 &pcfg_pull_default>,
+						<1 RK_PD4 2 &pcfg_pull_default>,
+						<1 RK_PD5 2 &pcfg_pull_default>,
+						<1 RK_PD6 2 &pcfg_pull_default>,
+						<1 RK_PD7 2 &pcfg_pull_default>;
+			};
+		};
+
+		emac {
+			emac_xfer: emac-xfer {
+				rockchip,pins = <2 RK_PB2 1 &pcfg_pull_default>, /* crs_dvalid */
+						<2 RK_PB5 1 &pcfg_pull_default>, /* tx_en */
+						<2 RK_PB6 1 &pcfg_pull_default>, /* mac_clk */
+						<2 RK_PB7 1 &pcfg_pull_default>, /* rx_err */
+						<2 RK_PC0 1 &pcfg_pull_default>, /* rxd1 */
+						<2 RK_PC1 1 &pcfg_pull_default>, /* rxd0 */
+						<2 RK_PC2 1 &pcfg_pull_default>, /* txd1 */
+						<2 RK_PC3 1 &pcfg_pull_default>; /* txd0 */
+			};
+
+			emac_mdio: emac-mdio {
+				rockchip,pins = <2 RK_PB4 1 &pcfg_pull_default>, /* mac_md */
+						<2 RK_PD1 1 &pcfg_pull_default>; /* mac_mdclk */
+			};
+		};
+
+		i2c0 {
+			i2c0_xfer: i2c0-xfer {
+				rockchip,pins = <0 RK_PA0 1 &pcfg_pull_none>,
+						<0 RK_PA1 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c1 {
+			i2c1_xfer: i2c1-xfer {
+				rockchip,pins = <0 RK_PA2 1 &pcfg_pull_none>,
+						<0 RK_PA3 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c2 {
+			i2c2_xfer: i2c2-xfer {
+				rockchip,pins = <2 RK_PC4 1 &pcfg_pull_none>,
+						<2 RK_PC5 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2s {
+			i2s_bus: i2s-bus {
+				rockchip,pins = <1 RK_PA0 1 &pcfg_pull_default>,
+						<1 RK_PA1 1 &pcfg_pull_default>,
+						<1 RK_PA2 1 &pcfg_pull_default>,
+						<1 RK_PA3 1 &pcfg_pull_default>,
+						<1 RK_PA4 1 &pcfg_pull_default>,
+						<1 RK_PA5 1 &pcfg_pull_default>;
+			};
+		};
+
+		hdmi {
+			hdmi_ctl: hdmi-ctl {
+				rockchip,pins = <1 RK_PB0 1 &pcfg_pull_none>,
+						<1 RK_PB1 1 &pcfg_pull_none>,
+						<1 RK_PB2 1 &pcfg_pull_none>,
+						<1 RK_PB3 1 &pcfg_pull_none>;
+			};
+		};
+
+		uart0 {
+			uart0_xfer: uart0-xfer {
+				rockchip,pins = <0 RK_PC0 1 &pcfg_pull_default>,
+						<0 RK_PC1 1 &pcfg_pull_none>;
+			};
+
+			uart0_cts: uart0-cts {
+				rockchip,pins = <0 RK_PC2 1 &pcfg_pull_default>;
+			};
+
+			uart0_rts: uart0-rts {
+				rockchip,pins = <0 RK_PC3 1 &pcfg_pull_none>;
+			};
+		};
+
+		uart1 {
+			uart1_xfer: uart1-xfer {
+				rockchip,pins = <2 RK_PC6 1 &pcfg_pull_default>,
+						<2 RK_PC7 1 &pcfg_pull_none>;
+			};
+			/* no rts / cts for uart1 */
+		};
+
+		uart2 {
+			uart2_xfer: uart2-xfer {
+				rockchip,pins = <1 RK_PC2 2 &pcfg_pull_default>,
+						<1 RK_PC3 2 &pcfg_pull_none>;
+			};
+			/* no rts / cts for uart2 */
+		};
+
+		spi-pins {
+			spi_txd:spi-txd {
+				rockchip,pins = <1 RK_PD5 3 &pcfg_pull_default>;
+			};
+
+			spi_rxd:spi-rxd {
+				rockchip,pins = <1 RK_PD4 3 &pcfg_pull_default>;
+			};
+
+			spi_clk:spi-clk {
+				rockchip,pins = <2 RK_PA0 2 &pcfg_pull_default>;
+			};
+
+			spi_cs0:spi-cs0 {
+				rockchip,pins = <1 RK_PD6 3 &pcfg_pull_default>;
+
+			};
+
+			spi_cs1:spi-cs1 {
+				rockchip,pins = <1 RK_PD7 3 &pcfg_pull_default>;
+
+			};
+		};
+	};
+};