Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 266 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts b/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts
new file mode 100644
index 000000000..86e138e8c
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts
@@ -0,0 +1,266 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra30-apalis-v1.1.dtsi"
+
+/ {
+	model = "Toradex Apalis T30 on Apalis Evaluation Board";
+	compatible = "toradex,apalis_t30-v1.1-eval", "toradex,apalis_t30-eval",
+		     "toradex,apalis_t30-v1.1", "toradex,apalis_t30",
+		     "nvidia,tegra30";
+
+	aliases {
+		rtc0 = "/i2c@7000c000/rtc@68";
+		rtc1 = "/i2c@7000d000/pmic@2d";
+		rtc2 = "/rtc@7000e000";
+		serial0 = &uarta;
+		serial1 = &uartb;
+		serial2 = &uartc;
+		serial3 = &uartd;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	pcie@3000 {
+		pci@1,0 {
+			status = "okay";
+		};
+
+		pci@2,0 {
+			status = "okay";
+		};
+	};
+
+	host1x@50000000 {
+		dc@54200000 {
+			rgb {
+				status = "okay";
+				nvidia,panel = <&panel>;
+			};
+		};
+
+		hdmi@54280000 {
+			status = "okay";
+			hdmi-supply = <&reg_5v0>;
+		};
+	};
+
+	/* Apalis UART1 */
+	serial@70006000 {
+		status = "okay";
+	};
+
+	/* Apalis UART2 */
+	serial@70006040 {
+		status = "okay";
+	};
+
+	/* Apalis UART3 */
+	serial@70006200 {
+		status = "okay";
+	};
+
+	/* Apalis UART4 */
+	serial@70006300 {
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	/*
+	 * GEN1_I2C: I2C1_SDA/SCL on MXM3 pin 209/211 (e.g. RTC on carrier
+	 * board)
+	 */
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pcie-switch@58 {
+			compatible = "plx,pex8605";
+			reg = <0x58>;
+		};
+
+		/* M41T0M6 real time clock on carrier board */
+		rtc@68 {
+			compatible = "st,m41t0";
+			reg = <0x68>;
+		};
+	};
+
+	/* GEN2_I2C: unused */
+
+	/*
+	 * CAM_I2C: I2C3_SDA/SCL on MXM3 pin 201/203 (e.g. camera sensor on
+	 * carrier board)
+	 */
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	/* DDC: I2C2_SDA/SCL on MXM3 pin 205/207 (e.g. display EDID) */
+	i2c@7000c700 {
+		status = "okay";
+	};
+
+	/* SPI1: Apalis SPI1 */
+	spi@7000d400 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+	};
+
+	/* SPI5: Apalis SPI2 */
+	spi@7000dc00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+	};
+
+	/* Apalis SD1 */
+	mmc@78000000 {
+		status = "okay";
+		bus-width = <4>;
+		/* SD1_CD# */
+		cd-gpios = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_LOW>;
+		no-1-8-v;
+	};
+
+	/* Apalis MMC1 */
+	mmc@78000400 {
+		status = "okay";
+		bus-width = <8>;
+		/* MMC1_CD# */
+		cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
+		vqmmc-supply = <&reg_vddio_sdmmc3>;
+	};
+
+	/* EHCI instance 0: USB1_DP/N -> USBO1_DP/N */
+	usb@7d000000 {
+		status = "okay";
+		dr_mode = "otg";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		vbus-supply = <&reg_usbo1_vbus>;
+	};
+
+	/* EHCI instance 1: USB2_DP/N -> USBH2_DP/N */
+	usb@7d004000 {
+		status = "okay";
+	};
+
+	usb-phy@7d004000 {
+		status = "okay";
+		vbus-supply = <&reg_usbh_vbus>;
+	};
+
+	/* EHCI instance 2: USB3_DP/N -> USBH3_DP/N */
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		status = "okay";
+		vbus-supply = <&reg_usbh_vbus>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <255 231 223 207 191 159 127 0>;
+		default-brightness-level = <6>;
+		/* BKL1_ON */
+		enable-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_3v3>;
+		pwms = <&pwm 0 5000000>; /* BKL1_PWM */
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		wakeup {
+			label = "WAKE1_MICO";
+			gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
+	panel: panel {
+		/*
+		 * edt,et057090dhu: EDT 5.7" LCD TFT
+		 * edt,et070080dh6: EDT 7.0" LCD TFT
+		 */
+		compatible = "edt,et057090dhu";
+		backlight = <&backlight>;
+		power-supply = <&reg_3v3>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V_SW";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_SW";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	/* USBO1_EN */
+	reg_usbo1_vbus: regulator-usbo1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_USBO1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_5v0>;
+	};
+
+	/* USBH_EN */
+	reg_usbh_vbus: regulator-usbh-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_USBH(2A|2C|2D|3|4)";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_5v0>;
+	};
+
+	/*
+	 * 1.8 volt resp. 3.3 volt VDDIO_SDMMC3 depending on
+	 * EN_+3.3_SDMMC3 GPIO
+	 */
+	reg_vddio_sdmmc3: regulator-vddio-sdmmc3 {
+		compatible = "regulator-gpio";
+		regulator-name = "VDDIO_SDMMC3";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-type = "voltage";
+		gpios = <&gpio TEGRA_GPIO(J, 5) GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x0>,
+			 <3300000 0x1>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vddio_sdmmc_1v8_reg>;
+	};
+};
+
+&gpio {
+	/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
+	pex-perst-n {
+		gpio-hog;
+		gpios = <TEGRA_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PEX_PERST_N";
+	};
+};