Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 415 insertions, 0 deletions

diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
new file mode 100644
index 000000000..eb0f09edb
--- /dev/null
+++ b/arch/arm/mach-omap1/devices.c
@@ -0,0 +1,415 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * linux/arch/arm/mach-omap1/devices.c
+ *
+ * OMAP1 platform device setup/initialization
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+
+#include <linux/platform_data/omap-wd-timer.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/tc.h>
+#include <mach/mux.h>
+
+#include <mach/omap7xx.h>
+#include <mach/hardware.h>
+
+#include "common.h"
+#include "clock.h"
+#include "mmc.h"
+#include "sram.h"
+
+#if IS_ENABLED(CONFIG_RTC_DRV_OMAP)
+
+#define	OMAP_RTC_BASE		0xfffb4800
+
+static struct resource rtc_resources[] = {
+	{
+		.start		= OMAP_RTC_BASE,
+		.end		= OMAP_RTC_BASE + 0x5f,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= INT_RTC_TIMER,
+		.flags		= IORESOURCE_IRQ,
+	},
+	{
+		.start		= INT_RTC_ALARM,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device omap_rtc_device = {
+	.name           = "omap_rtc",
+	.id             = -1,
+	.num_resources	= ARRAY_SIZE(rtc_resources),
+	.resource	= rtc_resources,
+};
+
+static void omap_init_rtc(void)
+{
+	(void) platform_device_register(&omap_rtc_device);
+}
+#else
+static inline void omap_init_rtc(void) {}
+#endif
+
+static inline void omap_init_mbox(void) { }
+
+/*-------------------------------------------------------------------------*/
+
+#if IS_ENABLED(CONFIG_MMC_OMAP)
+
+static inline void omap1_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
+			int controller_nr)
+{
+	if (controller_nr == 0) {
+		if (cpu_is_omap7xx()) {
+			omap_cfg_reg(MMC_7XX_CMD);
+			omap_cfg_reg(MMC_7XX_CLK);
+			omap_cfg_reg(MMC_7XX_DAT0);
+		} else {
+			omap_cfg_reg(MMC_CMD);
+			omap_cfg_reg(MMC_CLK);
+			omap_cfg_reg(MMC_DAT0);
+		}
+
+		if (cpu_is_omap1710()) {
+			omap_cfg_reg(M15_1710_MMC_CLKI);
+			omap_cfg_reg(P19_1710_MMC_CMDDIR);
+			omap_cfg_reg(P20_1710_MMC_DATDIR0);
+		}
+		if (mmc_controller->slots[0].wires == 4 && !cpu_is_omap7xx()) {
+			omap_cfg_reg(MMC_DAT1);
+			/* NOTE: DAT2 can be on W10 (here) or M15 */
+			if (!mmc_controller->slots[0].nomux)
+				omap_cfg_reg(MMC_DAT2);
+			omap_cfg_reg(MMC_DAT3);
+		}
+	}
+
+	/* Block 2 is on newer chips, and has many pinout options */
+	if (cpu_is_omap16xx() && controller_nr == 1) {
+		if (!mmc_controller->slots[1].nomux) {
+			omap_cfg_reg(Y8_1610_MMC2_CMD);
+			omap_cfg_reg(Y10_1610_MMC2_CLK);
+			omap_cfg_reg(R18_1610_MMC2_CLKIN);
+			omap_cfg_reg(W8_1610_MMC2_DAT0);
+			if (mmc_controller->slots[1].wires == 4) {
+				omap_cfg_reg(V8_1610_MMC2_DAT1);
+				omap_cfg_reg(W15_1610_MMC2_DAT2);
+				omap_cfg_reg(R10_1610_MMC2_DAT3);
+			}
+
+			/* These are needed for the level shifter */
+			omap_cfg_reg(V9_1610_MMC2_CMDDIR);
+			omap_cfg_reg(V5_1610_MMC2_DATDIR0);
+			omap_cfg_reg(W19_1610_MMC2_DATDIR1);
+		}
+
+		/* Feedback clock must be set on OMAP-1710 MMC2 */
+		if (cpu_is_omap1710())
+			omap_writel(omap_readl(MOD_CONF_CTRL_1) | (1 << 24),
+					MOD_CONF_CTRL_1);
+	}
+}
+
+#define OMAP_MMC_NR_RES		4
+
+/*
+ * Register MMC devices.
+ */
+static int __init omap_mmc_add(const char *name, int id, unsigned long base,
+				unsigned long size, unsigned int irq,
+				unsigned rx_req, unsigned tx_req,
+				struct omap_mmc_platform_data *data)
+{
+	struct platform_device *pdev;
+	struct resource res[OMAP_MMC_NR_RES];
+	int ret;
+
+	pdev = platform_device_alloc(name, id);
+	if (!pdev)
+		return -ENOMEM;
+
+	memset(res, 0, OMAP_MMC_NR_RES * sizeof(struct resource));
+	res[0].start = base;
+	res[0].end = base + size - 1;
+	res[0].flags = IORESOURCE_MEM;
+	res[1].start = res[1].end = irq;
+	res[1].flags = IORESOURCE_IRQ;
+	res[2].start = rx_req;
+	res[2].name = "rx";
+	res[2].flags = IORESOURCE_DMA;
+	res[3].start = tx_req;
+	res[3].name = "tx";
+	res[3].flags = IORESOURCE_DMA;
+
+	if (cpu_is_omap7xx())
+		data->slots[0].features = MMC_OMAP7XX;
+	if (cpu_is_omap15xx())
+		data->slots[0].features = MMC_OMAP15XX;
+	if (cpu_is_omap16xx())
+		data->slots[0].features = MMC_OMAP16XX;
+
+	ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
+	if (ret == 0)
+		ret = platform_device_add_data(pdev, data, sizeof(*data));
+	if (ret)
+		goto fail;
+
+	ret = platform_device_add(pdev);
+	if (ret)
+		goto fail;
+
+	/* return device handle to board setup code */
+	data->dev = &pdev->dev;
+	return 0;
+
+fail:
+	platform_device_put(pdev);
+	return ret;
+}
+
+void __init omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
+			int nr_controllers)
+{
+	int i;
+
+	for (i = 0; i < nr_controllers; i++) {
+		unsigned long base, size;
+		unsigned rx_req, tx_req;
+		unsigned int irq = 0;
+
+		if (!mmc_data[i])
+			continue;
+
+		omap1_mmc_mux(mmc_data[i], i);
+
+		switch (i) {
+		case 0:
+			base = OMAP1_MMC1_BASE;
+			irq = INT_MMC;
+			rx_req = 22;
+			tx_req = 21;
+			break;
+		case 1:
+			if (!cpu_is_omap16xx())
+				return;
+			base = OMAP1_MMC2_BASE;
+			irq = INT_1610_MMC2;
+			rx_req = 55;
+			tx_req = 54;
+			break;
+		default:
+			continue;
+		}
+		size = OMAP1_MMC_SIZE;
+
+		omap_mmc_add("mmci-omap", i, base, size, irq,
+				rx_req, tx_req, mmc_data[i]);
+	}
+}
+
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+/* OMAP7xx SPI support */
+#if IS_ENABLED(CONFIG_SPI_OMAP_100K)
+
+struct platform_device omap_spi1 = {
+	.name           = "omap1_spi100k",
+	.id             = 1,
+};
+
+struct platform_device omap_spi2 = {
+	.name           = "omap1_spi100k",
+	.id             = 2,
+};
+
+static void omap_init_spi100k(void)
+{
+	if (!cpu_is_omap7xx())
+		return;
+
+	omap_spi1.dev.platform_data = ioremap(OMAP7XX_SPI1_BASE, 0x7ff);
+	if (omap_spi1.dev.platform_data)
+		platform_device_register(&omap_spi1);
+
+	omap_spi2.dev.platform_data = ioremap(OMAP7XX_SPI2_BASE, 0x7ff);
+	if (omap_spi2.dev.platform_data)
+		platform_device_register(&omap_spi2);
+}
+
+#else
+static inline void omap_init_spi100k(void)
+{
+}
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+static inline void omap_init_sti(void) {}
+
+/* Numbering for the SPI-capable controllers when used for SPI:
+ * spi		= 1
+ * uwire	= 2
+ * mmc1..2	= 3..4
+ * mcbsp1..3	= 5..7
+ */
+
+#if IS_ENABLED(CONFIG_SPI_OMAP_UWIRE)
+
+#define	OMAP_UWIRE_BASE		0xfffb3000
+
+static struct resource uwire_resources[] = {
+	{
+		.start		= OMAP_UWIRE_BASE,
+		.end		= OMAP_UWIRE_BASE + 0x20,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device omap_uwire_device = {
+	.name	   = "omap_uwire",
+	.id	     = -1,
+	.num_resources	= ARRAY_SIZE(uwire_resources),
+	.resource	= uwire_resources,
+};
+
+static void omap_init_uwire(void)
+{
+	/* FIXME define and use a boot tag; not all boards will be hooking
+	 * up devices to the microwire controller, and multi-board configs
+	 * mean that CONFIG_SPI_OMAP_UWIRE may be configured anyway...
+	 */
+
+	/* board-specific code must configure chipselects (only a few
+	 * are normally used) and SCLK/SDI/SDO (each has two choices).
+	 */
+	(void) platform_device_register(&omap_uwire_device);
+}
+#else
+static inline void omap_init_uwire(void) {}
+#endif
+
+
+#define OMAP1_RNG_BASE		0xfffe5000
+
+static struct resource omap1_rng_resources[] = {
+	{
+		.start		= OMAP1_RNG_BASE,
+		.end		= OMAP1_RNG_BASE + 0x4f,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device omap1_rng_device = {
+	.name		= "omap_rng",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(omap1_rng_resources),
+	.resource	= omap1_rng_resources,
+};
+
+static void omap1_init_rng(void)
+{
+	if (!cpu_is_omap16xx())
+		return;
+
+	(void) platform_device_register(&omap1_rng_device);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * This gets called after board-specific INIT_MACHINE, and initializes most
+ * on-chip peripherals accessible on this board (except for few like USB):
+ *
+ *  (a) Does any "standard config" pin muxing needed.  Board-specific
+ *	code will have muxed GPIO pins and done "nonstandard" setup;
+ *	that code could live in the boot loader.
+ *  (b) Populating board-specific platform_data with the data drivers
+ *	rely on to handle wiring variations.
+ *  (c) Creating platform devices as meaningful on this board and
+ *	with this kernel configuration.
+ *
+ * Claiming GPIOs, and setting their direction and initial values, is the
+ * responsibility of the device drivers.  So is responding to probe().
+ *
+ * Board-specific knowledge like creating devices or pin setup is to be
+ * kept out of drivers as much as possible.  In particular, pin setup
+ * may be handled by the boot loader, and drivers should expect it will
+ * normally have been done by the time they're probed.
+ */
+static int __init omap1_init_devices(void)
+{
+	if (!cpu_class_is_omap1())
+		return -ENODEV;
+
+	omap_sram_init();
+	omap1_clk_late_init();
+
+	/* please keep these calls, and their implementations above,
+	 * in alphabetical order so they're easier to sort through.
+	 */
+
+	omap_init_mbox();
+	omap_init_rtc();
+	omap_init_spi100k();
+	omap_init_sti();
+	omap_init_uwire();
+	omap1_init_rng();
+
+	return 0;
+}
+arch_initcall(omap1_init_devices);
+
+#if IS_ENABLED(CONFIG_OMAP_WATCHDOG)
+
+static struct resource wdt_resources[] = {
+	{
+		.start		= 0xfffeb000,
+		.end		= 0xfffeb07F,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device omap_wdt_device = {
+	.name		= "omap_wdt",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(wdt_resources),
+	.resource	= wdt_resources,
+};
+
+static int __init omap_init_wdt(void)
+{
+	struct omap_wd_timer_platform_data pdata;
+	int ret;
+
+	if (!cpu_is_omap16xx())
+		return -ENODEV;
+
+	pdata.read_reset_sources = omap1_get_reset_sources;
+
+	ret = platform_device_register(&omap_wdt_device);
+	if (!ret) {
+		ret = platform_device_add_data(&omap_wdt_device, &pdata,
+					       sizeof(pdata));
+		if (ret)
+			platform_device_del(&omap_wdt_device);
+	}
+
+	return ret;
+}
+subsys_initcall(omap_init_wdt);
+#endif