Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 328 insertions, 0 deletions

diff --git a/arch/s390/pci/pci_mmio.c b/arch/s390/pci/pci_mmio.c
new file mode 100644
index 000000000..6e7c4762b
--- /dev/null
+++ b/arch/s390/pci/pci_mmio.c
@@ -0,0 +1,328 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Access to PCI I/O memory from user space programs.
+ *
+ * Copyright IBM Corp. 2014
+ * Author(s): Alexey Ishchuk <aishchuk@linux.vnet.ibm.com>
+ */
+#include <linux/kernel.h>
+#include <linux/syscalls.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/errno.h>
+#include <linux/pci.h>
+#include <asm/pci_io.h>
+#include <asm/pci_debug.h>
+
+static inline void zpci_err_mmio(u8 cc, u8 status, u64 offset)
+{
+	struct {
+		u64 offset;
+		u8 cc;
+		u8 status;
+	} data = {offset, cc, status};
+
+	zpci_err_hex(&data, sizeof(data));
+}
+
+static inline int __pcistb_mio_inuser(
+		void __iomem *ioaddr, const void __user *src,
+		u64 len, u8 *status)
+{
+	int cc = -ENXIO;
+
+	asm volatile (
+		"       sacf 256\n"
+		"0:     .insn   rsy,0xeb00000000d4,%[len],%[ioaddr],%[src]\n"
+		"1:     ipm     %[cc]\n"
+		"       srl     %[cc],28\n"
+		"2:     sacf 768\n"
+		EX_TABLE(0b, 2b) EX_TABLE(1b, 2b)
+		: [cc] "+d" (cc), [len] "+d" (len)
+		: [ioaddr] "a" (ioaddr), [src] "Q" (*((u8 __force *)src))
+		: "cc", "memory");
+	*status = len >> 24 & 0xff;
+	return cc;
+}
+
+static inline int __pcistg_mio_inuser(
+		void __iomem *ioaddr, const void __user *src,
+		u64 ulen, u8 *status)
+{
+	register u64 addr asm("2") = (u64 __force) ioaddr;
+	register u64 len asm("3") = ulen;
+	int cc = -ENXIO;
+	u64 val = 0;
+	u64 cnt = ulen;
+	u8 tmp;
+
+	/*
+	 * copy 0 < @len <= 8 bytes from @src into the right most bytes of
+	 * a register, then store it to PCI at @ioaddr while in secondary
+	 * address space. pcistg then uses the user mappings.
+	 */
+	asm volatile (
+		"       sacf    256\n"
+		"0:     llgc    %[tmp],0(%[src])\n"
+		"4:	sllg	%[val],%[val],8\n"
+		"       aghi    %[src],1\n"
+		"       ogr     %[val],%[tmp]\n"
+		"       brctg   %[cnt],0b\n"
+		"1:     .insn   rre,0xb9d40000,%[val],%[ioaddr]\n"
+		"2:     ipm     %[cc]\n"
+		"       srl     %[cc],28\n"
+		"3:     sacf    768\n"
+		EX_TABLE(0b, 3b) EX_TABLE(4b, 3b) EX_TABLE(1b, 3b) EX_TABLE(2b, 3b)
+		:
+		[src] "+a" (src), [cnt] "+d" (cnt),
+		[val] "+d" (val), [tmp] "=d" (tmp),
+		[len] "+d" (len), [cc] "+d" (cc),
+		[ioaddr] "+a" (addr)
+		:: "cc", "memory");
+	*status = len >> 24 & 0xff;
+
+	/* did we read everything from user memory? */
+	if (!cc && cnt != 0)
+		cc = -EFAULT;
+
+	return cc;
+}
+
+static inline int __memcpy_toio_inuser(void __iomem *dst,
+				   const void __user *src, size_t n)
+{
+	int size, rc = 0;
+	u8 status = 0;
+	mm_segment_t old_fs;
+
+	if (!src)
+		return -EINVAL;
+
+	old_fs = enable_sacf_uaccess();
+	while (n > 0) {
+		size = zpci_get_max_io_size((u64 __force) dst,
+					    (u64 __force) src, n,
+					    ZPCI_MAX_WRITE_SIZE);
+		if (size > 8) /* main path */
+			rc = __pcistb_mio_inuser(dst, src, size, &status);
+		else
+			rc = __pcistg_mio_inuser(dst, src, size, &status);
+		if (rc)
+			break;
+		src += size;
+		dst += size;
+		n -= size;
+	}
+	disable_sacf_uaccess(old_fs);
+	if (rc)
+		zpci_err_mmio(rc, status, (__force u64) dst);
+	return rc;
+}
+
+static long get_pfn(unsigned long user_addr, unsigned long access,
+		    unsigned long *pfn)
+{
+	struct vm_area_struct *vma;
+	long ret;
+
+	mmap_read_lock(current->mm);
+	ret = -EINVAL;
+	vma = find_vma(current->mm, user_addr);
+	if (!vma || user_addr < vma->vm_start)
+		goto out;
+	ret = -EACCES;
+	if (!(vma->vm_flags & access))
+		goto out;
+	ret = follow_pfn(vma, user_addr, pfn);
+out:
+	mmap_read_unlock(current->mm);
+	return ret;
+}
+
+SYSCALL_DEFINE3(s390_pci_mmio_write, unsigned long, mmio_addr,
+		const void __user *, user_buffer, size_t, length)
+{
+	u8 local_buf[64];
+	void __iomem *io_addr;
+	void *buf;
+	unsigned long pfn;
+	long ret;
+
+	if (!zpci_is_enabled())
+		return -ENODEV;
+
+	if (length <= 0 || PAGE_SIZE - (mmio_addr & ~PAGE_MASK) < length)
+		return -EINVAL;
+
+	/*
+	 * We only support write access to MIO capable devices if we are on
+	 * a MIO enabled system. Otherwise we would have to check for every
+	 * address if it is a special ZPCI_ADDR and would have to do
+	 * a get_pfn() which we don't need for MIO capable devices.  Currently
+	 * ISM devices are the only devices without MIO support and there is no
+	 * known need for accessing these from userspace.
+	 */
+	if (static_branch_likely(&have_mio)) {
+		ret = __memcpy_toio_inuser((void  __iomem *) mmio_addr,
+					user_buffer,
+					length);
+		return ret;
+	}
+
+	if (length > 64) {
+		buf = kmalloc(length, GFP_KERNEL);
+		if (!buf)
+			return -ENOMEM;
+	} else
+		buf = local_buf;
+
+	ret = get_pfn(mmio_addr, VM_WRITE, &pfn);
+	if (ret)
+		goto out;
+	io_addr = (void __iomem *)((pfn << PAGE_SHIFT) |
+			(mmio_addr & ~PAGE_MASK));
+
+	ret = -EFAULT;
+	if ((unsigned long) io_addr < ZPCI_IOMAP_ADDR_BASE)
+		goto out;
+
+	if (copy_from_user(buf, user_buffer, length))
+		goto out;
+
+	ret = zpci_memcpy_toio(io_addr, buf, length);
+out:
+	if (buf != local_buf)
+		kfree(buf);
+	return ret;
+}
+
+static inline int __pcilg_mio_inuser(
+		void __user *dst, const void __iomem *ioaddr,
+		u64 ulen, u8 *status)
+{
+	register u64 addr asm("2") = (u64 __force) ioaddr;
+	register u64 len asm("3") = ulen;
+	u64 cnt = ulen;
+	int shift = ulen * 8;
+	int cc = -ENXIO;
+	u64 val, tmp;
+
+	/*
+	 * read 0 < @len <= 8 bytes from the PCI memory mapped at @ioaddr (in
+	 * user space) into a register using pcilg then store these bytes at
+	 * user address @dst
+	 */
+	asm volatile (
+		"       sacf    256\n"
+		"0:     .insn   rre,0xb9d60000,%[val],%[ioaddr]\n"
+		"1:     ipm     %[cc]\n"
+		"       srl     %[cc],28\n"
+		"       ltr     %[cc],%[cc]\n"
+		"       jne     4f\n"
+		"2:     ahi     %[shift],-8\n"
+		"       srlg    %[tmp],%[val],0(%[shift])\n"
+		"3:     stc     %[tmp],0(%[dst])\n"
+		"5:	aghi	%[dst],1\n"
+		"       brctg   %[cnt],2b\n"
+		"4:     sacf    768\n"
+		EX_TABLE(0b, 4b) EX_TABLE(1b, 4b) EX_TABLE(3b, 4b) EX_TABLE(5b, 4b)
+		:
+		[cc] "+d" (cc), [val] "=d" (val), [len] "+d" (len),
+		[dst] "+a" (dst), [cnt] "+d" (cnt), [tmp] "=d" (tmp),
+		[shift] "+d" (shift)
+		:
+		[ioaddr] "a" (addr)
+		: "cc", "memory");
+
+	/* did we write everything to the user space buffer? */
+	if (!cc && cnt != 0)
+		cc = -EFAULT;
+
+	*status = len >> 24 & 0xff;
+	return cc;
+}
+
+static inline int __memcpy_fromio_inuser(void __user *dst,
+				     const void __iomem *src,
+				     unsigned long n)
+{
+	int size, rc = 0;
+	u8 status;
+	mm_segment_t old_fs;
+
+	old_fs = enable_sacf_uaccess();
+	while (n > 0) {
+		size = zpci_get_max_io_size((u64 __force) src,
+					    (u64 __force) dst, n,
+					    ZPCI_MAX_READ_SIZE);
+		rc = __pcilg_mio_inuser(dst, src, size, &status);
+		if (rc)
+			break;
+		src += size;
+		dst += size;
+		n -= size;
+	}
+	disable_sacf_uaccess(old_fs);
+	if (rc)
+		zpci_err_mmio(rc, status, (__force u64) dst);
+	return rc;
+}
+
+SYSCALL_DEFINE3(s390_pci_mmio_read, unsigned long, mmio_addr,
+		void __user *, user_buffer, size_t, length)
+{
+	u8 local_buf[64];
+	void __iomem *io_addr;
+	void *buf;
+	unsigned long pfn;
+	long ret;
+
+	if (!zpci_is_enabled())
+		return -ENODEV;
+
+	if (length <= 0 || PAGE_SIZE - (mmio_addr & ~PAGE_MASK) < length)
+		return -EINVAL;
+
+	/*
+	 * We only support read access to MIO capable devices if we are on
+	 * a MIO enabled system. Otherwise we would have to check for every
+	 * address if it is a special ZPCI_ADDR and would have to do
+	 * a get_pfn() which we don't need for MIO capable devices.  Currently
+	 * ISM devices are the only devices without MIO support and there is no
+	 * known need for accessing these from userspace.
+	 */
+	if (static_branch_likely(&have_mio)) {
+		ret = __memcpy_fromio_inuser(
+				user_buffer, (const void __iomem *)mmio_addr,
+				length);
+		return ret;
+	}
+
+	if (length > 64) {
+		buf = kmalloc(length, GFP_KERNEL);
+		if (!buf)
+			return -ENOMEM;
+	} else {
+		buf = local_buf;
+	}
+
+	ret = get_pfn(mmio_addr, VM_READ, &pfn);
+	if (ret)
+		goto out;
+	io_addr = (void __iomem *)((pfn << PAGE_SHIFT) | (mmio_addr & ~PAGE_MASK));
+
+	if ((unsigned long) io_addr < ZPCI_IOMAP_ADDR_BASE) {
+		ret = -EFAULT;
+		goto out;
+	}
+	ret = zpci_memcpy_fromio(buf, io_addr, length);
+	if (ret)
+		goto out;
+	if (copy_to_user(user_buffer, buf, length))
+		ret = -EFAULT;
+
+out:
+	if (buf != local_buf)
+		kfree(buf);
+	return ret;
+}