Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 724 insertions, 0 deletions

diff --git a/drivers/crypto/cavium/nitrox/nitrox_req.h b/drivers/crypto/cavium/nitrox/nitrox_req.h
new file mode 100644
index 000000000..12282c1b1
--- /dev/null
+++ b/drivers/crypto/cavium/nitrox/nitrox_req.h
@@ -0,0 +1,724 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __NITROX_REQ_H
+#define __NITROX_REQ_H
+
+#include <linux/dma-mapping.h>
+#include <crypto/aes.h>
+
+#include "nitrox_dev.h"
+
+#define PENDING_SIG	0xFFFFFFFFFFFFFFFFUL
+#define PRIO 4001
+
+typedef void (*sereq_completion_t)(void *req, int err);
+
+/**
+ * struct gphdr - General purpose Header
+ * @param0: first parameter.
+ * @param1: second parameter.
+ * @param2: third parameter.
+ * @param3: fourth parameter.
+ *
+ * Params tell the iv and enc/dec data offsets.
+ */
+struct gphdr {
+	__be16 param0;
+	__be16 param1;
+	__be16 param2;
+	__be16 param3;
+};
+
+/**
+ * struct se_req_ctrl - SE request information.
+ * @arg: Minor number of the opcode
+ * @ctxc: Context control.
+ * @unca: Uncertainity enabled.
+ * @info: Additional information for SE cores.
+ * @ctxl: Context length in bytes.
+ * @uddl: User defined data length
+ */
+union se_req_ctrl {
+	u64 value;
+	struct {
+		u64 raz	: 22;
+		u64 arg	: 8;
+		u64 ctxc : 2;
+		u64 unca : 1;
+		u64 info : 3;
+		u64 unc : 8;
+		u64 ctxl : 12;
+		u64 uddl : 8;
+	} s;
+};
+
+#define MAX_IV_LEN 16
+
+/**
+ * struct se_crypto_request - SE crypto request structure.
+ * @opcode: Request opcode (enc/dec)
+ * @flags: flags from crypto subsystem
+ * @ctx_handle: Crypto context handle.
+ * @gph: GP Header
+ * @ctrl: Request Information.
+ * @orh: ORH address
+ * @comp: completion address
+ * @src: Input sglist
+ * @dst: Output sglist
+ */
+struct se_crypto_request {
+	u8 opcode;
+	gfp_t gfp;
+	u32 flags;
+	u64 ctx_handle;
+
+	struct gphdr gph;
+	union se_req_ctrl ctrl;
+	u64 *orh;
+	u64 *comp;
+
+	struct scatterlist *src;
+	struct scatterlist *dst;
+};
+
+/* Crypto opcodes */
+#define FLEXI_CRYPTO_ENCRYPT_HMAC	0x33
+#define ENCRYPT	0
+#define DECRYPT 1
+
+/* IV from context */
+#define IV_FROM_CTX	0
+/* IV from Input data */
+#define IV_FROM_DPTR	1
+
+/**
+ * cipher opcodes for firmware
+ */
+enum flexi_cipher {
+	CIPHER_NULL = 0,
+	CIPHER_3DES_CBC,
+	CIPHER_3DES_ECB,
+	CIPHER_AES_CBC,
+	CIPHER_AES_ECB,
+	CIPHER_AES_CFB,
+	CIPHER_AES_CTR,
+	CIPHER_AES_GCM,
+	CIPHER_AES_XTS,
+	CIPHER_AES_CCM,
+	CIPHER_AES_CBC_CTS,
+	CIPHER_AES_ECB_CTS,
+	CIPHER_INVALID
+};
+
+enum flexi_auth {
+	AUTH_NULL = 0,
+	AUTH_MD5,
+	AUTH_SHA1,
+	AUTH_SHA2_SHA224,
+	AUTH_SHA2_SHA256,
+	AUTH_SHA2_SHA384,
+	AUTH_SHA2_SHA512,
+	AUTH_GMAC,
+	AUTH_INVALID
+};
+
+/**
+ * struct crypto_keys - Crypto keys
+ * @key: Encryption key or KEY1 for AES-XTS
+ * @iv: Encryption IV or Tweak for AES-XTS
+ */
+struct crypto_keys {
+	union {
+		u8 key[AES_MAX_KEY_SIZE];
+		u8 key1[AES_MAX_KEY_SIZE];
+	} u;
+	u8 iv[AES_BLOCK_SIZE];
+};
+
+/**
+ * struct auth_keys - Authentication keys
+ * @ipad: IPAD or KEY2 for AES-XTS
+ * @opad: OPAD or AUTH KEY if auth_input_type = 1
+ */
+struct auth_keys {
+	union {
+		u8 ipad[64];
+		u8 key2[64];
+	} u;
+	u8 opad[64];
+};
+
+union fc_ctx_flags {
+	__be64 f;
+	struct {
+#if defined(__BIG_ENDIAN_BITFIELD)
+		u64 cipher_type	: 4;
+		u64 reserved_59	: 1;
+		u64 aes_keylen : 2;
+		u64 iv_source : 1;
+		u64 hash_type : 4;
+		u64 reserved_49_51 : 3;
+		u64 auth_input_type: 1;
+		u64 mac_len : 8;
+		u64 reserved_0_39 : 40;
+#else
+		u64 reserved_0_39 : 40;
+		u64 mac_len : 8;
+		u64 auth_input_type: 1;
+		u64 reserved_49_51 : 3;
+		u64 hash_type : 4;
+		u64 iv_source : 1;
+		u64 aes_keylen : 2;
+		u64 reserved_59	: 1;
+		u64 cipher_type	: 4;
+#endif
+	} w0;
+};
+/**
+ * struct flexi_crypto_context - Crypto context
+ * @cipher_type: Encryption cipher type
+ * @aes_keylen: AES key length
+ * @iv_source: Encryption IV source
+ * @hash_type: Authentication type
+ * @auth_input_type: Authentication input type
+ *   1 - Authentication IV and KEY, microcode calculates OPAD/IPAD
+ *   0 - Authentication OPAD/IPAD
+ * @mac_len: mac length
+ * @crypto: Crypto keys
+ * @auth: Authentication keys
+ */
+struct flexi_crypto_context {
+	union fc_ctx_flags flags;
+	struct crypto_keys crypto;
+	struct auth_keys auth;
+};
+
+struct crypto_ctx_hdr {
+	struct dma_pool *pool;
+	dma_addr_t dma;
+	void *vaddr;
+};
+
+struct nitrox_crypto_ctx {
+	struct nitrox_device *ndev;
+	union {
+		u64 ctx_handle;
+		struct flexi_crypto_context *fctx;
+	} u;
+	struct crypto_ctx_hdr *chdr;
+	sereq_completion_t callback;
+};
+
+struct nitrox_kcrypt_request {
+	struct se_crypto_request creq;
+	u8 *src;
+	u8 *dst;
+	u8 *iv_out;
+};
+
+/**
+ * struct nitrox_aead_rctx - AEAD request context
+ * @nkreq: Base request context
+ * @cryptlen: Encryption/Decryption data length
+ * @assoclen: AAD length
+ * @srclen: Input buffer length
+ * @dstlen: Output buffer length
+ * @iv: IV data
+ * @ivsize: IV data length
+ * @flags: AEAD req flags
+ * @ctx_handle: Device context handle
+ * @src: Source sglist
+ * @dst: Destination sglist
+ * @ctrl_arg: Identifies the request type (ENCRYPT/DECRYPT)
+ */
+struct nitrox_aead_rctx {
+	struct nitrox_kcrypt_request nkreq;
+	unsigned int cryptlen;
+	unsigned int assoclen;
+	unsigned int srclen;
+	unsigned int dstlen;
+	u8 *iv;
+	int ivsize;
+	u32 flags;
+	u64 ctx_handle;
+	struct scatterlist *src;
+	struct scatterlist *dst;
+	u8 ctrl_arg;
+};
+
+/**
+ * struct nitrox_rfc4106_rctx - rfc4106 cipher request context
+ * @base: AEAD request context
+ * @src: Source sglist
+ * @dst: Destination sglist
+ * @assoc: AAD
+ */
+struct nitrox_rfc4106_rctx {
+	struct nitrox_aead_rctx base;
+	struct scatterlist src[3];
+	struct scatterlist dst[3];
+	u8 assoc[20];
+};
+
+/**
+ * struct pkt_instr_hdr - Packet Instruction Header
+ * @g: Gather used
+ *   When [G] is set and [GSZ] != 0, the instruction is
+ *   indirect gather instruction.
+ *   When [G] is set and [GSZ] = 0, the instruction is
+ *   direct gather instruction.
+ * @gsz: Number of pointers in the indirect gather list
+ * @ihi: When set hardware duplicates the 1st 8 bytes of pkt_instr_hdr
+ *   and adds them to the packet after the pkt_instr_hdr but before any UDD
+ * @ssz: Not used by the input hardware. But can become slc_store_int[SSZ]
+ *   when [IHI] is set.
+ * @fsz: The number of front data bytes directly included in the
+ *   PCIe instruction.
+ * @tlen: The length of the input packet in bytes, include:
+ *   - 16B pkt_hdr
+ *   - Inline context bytes if any,
+ *   - UDD if any,
+ *   - packet payload bytes
+ */
+union pkt_instr_hdr {
+	u64 value;
+	struct {
+#if defined(__BIG_ENDIAN_BITFIELD)
+		u64 raz_48_63 : 16;
+		u64 g : 1;
+		u64 gsz	: 7;
+		u64 ihi	: 1;
+		u64 ssz	: 7;
+		u64 raz_30_31 : 2;
+		u64 fsz	: 6;
+		u64 raz_16_23 : 8;
+		u64 tlen : 16;
+#else
+		u64 tlen : 16;
+		u64 raz_16_23 : 8;
+		u64 fsz	: 6;
+		u64 raz_30_31 : 2;
+		u64 ssz	: 7;
+		u64 ihi	: 1;
+		u64 gsz	: 7;
+		u64 g : 1;
+		u64 raz_48_63 : 16;
+#endif
+	} s;
+};
+
+/**
+ * struct pkt_hdr - Packet Input Header
+ * @opcode: Request opcode (Major)
+ * @arg: Request opcode (Minor)
+ * @ctxc: Context control.
+ * @unca: When set [UNC] is the uncertainty count for an input packet.
+ *        The hardware uses uncertainty counts to predict
+ *        output buffer use and avoid deadlock.
+ * @info: Not used by input hardware. Available for use
+ *        during SE processing.
+ * @destport: The expected destination port/ring/channel for the packet.
+ * @unc: Uncertainty count for an input packet.
+ * @grp: SE group that will process the input packet.
+ * @ctxl: Context Length in 64-bit words.
+ * @uddl: User-defined data (UDD) length in bytes.
+ * @ctxp: Context pointer. CTXP<63,2:0> must be zero in all cases.
+ */
+union pkt_hdr {
+	u64 value[2];
+	struct {
+#if defined(__BIG_ENDIAN_BITFIELD)
+		u64 opcode : 8;
+		u64 arg	: 8;
+		u64 ctxc : 2;
+		u64 unca : 1;
+		u64 raz_44 : 1;
+		u64 info : 3;
+		u64 destport : 9;
+		u64 unc	: 8;
+		u64 raz_19_23 : 5;
+		u64 grp	: 3;
+		u64 raz_15 : 1;
+		u64 ctxl : 7;
+		u64 uddl : 8;
+#else
+		u64 uddl : 8;
+		u64 ctxl : 7;
+		u64 raz_15 : 1;
+		u64 grp	: 3;
+		u64 raz_19_23 : 5;
+		u64 unc	: 8;
+		u64 destport : 9;
+		u64 info : 3;
+		u64 raz_44 : 1;
+		u64 unca : 1;
+		u64 ctxc : 2;
+		u64 arg	: 8;
+		u64 opcode : 8;
+#endif
+		__be64 ctxp;
+	} s;
+};
+
+/**
+ * struct slc_store_info - Solicited Paceket Output Store Information.
+ * @ssz: The number of scatterlist pointers for the solicited output port
+ *       packet.
+ * @rptr: The result pointer for the solicited output port packet.
+ *        If [SSZ]=0, [RPTR] must point directly to a buffer on the remote
+ *        host that is large enough to hold the entire output packet.
+ *        If [SSZ]!=0, [RPTR] must point to an array of ([SSZ]+3)/4
+ *        sglist components at [RPTR] on the remote host.
+ */
+union slc_store_info {
+	u64 value[2];
+	struct {
+#if defined(__BIG_ENDIAN_BITFIELD)
+		u64 raz_39_63 : 25;
+		u64 ssz	: 7;
+		u64 raz_0_31 : 32;
+#else
+		u64 raz_0_31 : 32;
+		u64 ssz	: 7;
+		u64 raz_39_63 : 25;
+#endif
+		__be64 rptr;
+	} s;
+};
+
+/**
+ * struct nps_pkt_instr - NPS Packet Instruction of SE cores.
+ * @dptr0 : Input pointer points to buffer in remote host.
+ * @ih: Packet Instruction Header (8 bytes)
+ * @irh: Packet Input Header (16 bytes)
+ * @slc: Solicited Packet Output Store Information (16 bytes)
+ * @fdata: Front data
+ *
+ * 64-Byte Instruction Format
+ */
+struct nps_pkt_instr {
+	__be64 dptr0;
+	union pkt_instr_hdr ih;
+	union pkt_hdr irh;
+	union slc_store_info slc;
+	u64 fdata[2];
+};
+
+/**
+ * struct aqmq_command_s - The 32 byte command for AE processing.
+ * @opcode: Request opcode
+ * @param1: Request control parameter 1
+ * @param2: Request control parameter 2
+ * @dlen: Input length
+ * @dptr: Input pointer points to buffer in remote host
+ * @rptr: Result pointer points to buffer in remote host
+ * @grp: AQM Group (0..7)
+ * @cptr: Context pointer
+ */
+struct aqmq_command_s {
+	__be16 opcode;
+	__be16 param1;
+	__be16 param2;
+	__be16 dlen;
+	__be64 dptr;
+	__be64 rptr;
+	union {
+		__be64 word3;
+#if defined(__BIG_ENDIAN_BITFIELD)
+		u64 grp : 3;
+		u64 cptr : 61;
+#else
+		u64 cptr : 61;
+		u64 grp : 3;
+#endif
+	};
+};
+
+/**
+ * struct ctx_hdr - Book keeping data about the crypto context
+ * @pool: Pool used to allocate crypto context
+ * @dma: Base DMA address of the cypto context
+ * @ctx_dma: Actual usable crypto context for NITROX
+ */
+struct ctx_hdr {
+	struct dma_pool *pool;
+	dma_addr_t dma;
+	dma_addr_t ctx_dma;
+};
+
+/*
+ * struct sglist_component - SG list component format
+ * @len0: The number of bytes at [PTR0] on the remote host.
+ * @len1: The number of bytes at [PTR1] on the remote host.
+ * @len2: The number of bytes at [PTR2] on the remote host.
+ * @len3: The number of bytes at [PTR3] on the remote host.
+ * @dma0: First pointer point to buffer in remote host.
+ * @dma1: Second pointer point to buffer in remote host.
+ * @dma2: Third pointer point to buffer in remote host.
+ * @dma3: Fourth pointer point to buffer in remote host.
+ */
+struct nitrox_sgcomp {
+	__be16 len[4];
+	__be64 dma[4];
+};
+
+/*
+ * strutct nitrox_sgtable - SG list information
+ * @sgmap_cnt: Number of buffers mapped
+ * @total_bytes: Total bytes in sglist.
+ * @sgcomp_len: Total sglist components length.
+ * @sgcomp_dma: DMA address of sglist component.
+ * @sg: crypto request buffer.
+ * @sgcomp: sglist component for NITROX.
+ */
+struct nitrox_sgtable {
+	u8 sgmap_cnt;
+	u16 total_bytes;
+	u32 sgcomp_len;
+	dma_addr_t sgcomp_dma;
+	struct scatterlist *sg;
+	struct nitrox_sgcomp *sgcomp;
+};
+
+/* Response Header Length */
+#define ORH_HLEN	8
+/* Completion bytes Length */
+#define COMP_HLEN	8
+
+struct resp_hdr {
+	u64 *orh;
+	u64 *completion;
+};
+
+typedef void (*completion_t)(void *arg, int err);
+
+/**
+ * struct nitrox_softreq - Represents the NIROX Request.
+ * @response: response list entry
+ * @backlog: Backlog list entry
+ * @ndev: Device used to submit the request
+ * @cmdq: Command queue for submission
+ * @resp: Response headers
+ * @instr: 64B instruction
+ * @in: SG table for input
+ * @out SG table for output
+ * @tstamp: Request submitted time in jiffies
+ * @callback: callback after request completion/timeout
+ * @cb_arg: callback argument
+ */
+struct nitrox_softreq {
+	struct list_head response;
+	struct list_head backlog;
+
+	u32 flags;
+	gfp_t gfp;
+	atomic_t status;
+
+	struct nitrox_device *ndev;
+	struct nitrox_cmdq *cmdq;
+
+	struct nps_pkt_instr instr;
+	struct resp_hdr resp;
+	struct nitrox_sgtable in;
+	struct nitrox_sgtable out;
+
+	unsigned long tstamp;
+
+	completion_t callback;
+	void *cb_arg;
+};
+
+static inline int flexi_aes_keylen(int keylen)
+{
+	int aes_keylen;
+
+	switch (keylen) {
+	case AES_KEYSIZE_128:
+		aes_keylen = 1;
+		break;
+	case AES_KEYSIZE_192:
+		aes_keylen = 2;
+		break;
+	case AES_KEYSIZE_256:
+		aes_keylen = 3;
+		break;
+	default:
+		aes_keylen = -EINVAL;
+		break;
+	}
+	return aes_keylen;
+}
+
+static inline void *alloc_req_buf(int nents, int extralen, gfp_t gfp)
+{
+	size_t size;
+
+	size = sizeof(struct scatterlist) * nents;
+	size += extralen;
+
+	return kzalloc(size, gfp);
+}
+
+/**
+ * create_single_sg - Point SG entry to the data
+ * @sg:		Destination SG list
+ * @buf:	Data
+ * @buflen:	Data length
+ *
+ * Returns next free entry in the destination SG list
+ **/
+static inline struct scatterlist *create_single_sg(struct scatterlist *sg,
+						   void *buf, int buflen)
+{
+	sg_set_buf(sg, buf, buflen);
+	sg++;
+	return sg;
+}
+
+/**
+ * create_multi_sg - Create multiple sg entries with buflen data length from
+ *		     source sglist
+ * @to_sg:	Destination SG list
+ * @from_sg:	Source SG list
+ * @buflen:	Data length
+ *
+ * Returns next free entry in the destination SG list
+ **/
+static inline struct scatterlist *create_multi_sg(struct scatterlist *to_sg,
+						  struct scatterlist *from_sg,
+						  int buflen)
+{
+	struct scatterlist *sg = to_sg;
+	unsigned int sglen;
+
+	for (; buflen && from_sg; buflen -= sglen) {
+		sglen = from_sg->length;
+		if (sglen > buflen)
+			sglen = buflen;
+
+		sg_set_buf(sg, sg_virt(from_sg), sglen);
+		from_sg = sg_next(from_sg);
+		sg++;
+	}
+
+	return sg;
+}
+
+static inline void set_orh_value(u64 *orh)
+{
+	WRITE_ONCE(*orh, PENDING_SIG);
+}
+
+static inline void set_comp_value(u64 *comp)
+{
+	WRITE_ONCE(*comp, PENDING_SIG);
+}
+
+static inline int alloc_src_req_buf(struct nitrox_kcrypt_request *nkreq,
+				    int nents, int ivsize)
+{
+	struct se_crypto_request *creq = &nkreq->creq;
+
+	nkreq->src = alloc_req_buf(nents, ivsize, creq->gfp);
+	if (!nkreq->src)
+		return -ENOMEM;
+
+	return 0;
+}
+
+static inline void nitrox_creq_copy_iv(char *dst, char *src, int size)
+{
+	memcpy(dst, src, size);
+}
+
+static inline struct scatterlist *nitrox_creq_src_sg(char *iv, int ivsize)
+{
+	return (struct scatterlist *)(iv + ivsize);
+}
+
+static inline void nitrox_creq_set_src_sg(struct nitrox_kcrypt_request *nkreq,
+					  int nents, int ivsize,
+					  struct scatterlist *src, int buflen)
+{
+	char *iv = nkreq->src;
+	struct scatterlist *sg;
+	struct se_crypto_request *creq = &nkreq->creq;
+
+	creq->src = nitrox_creq_src_sg(iv, ivsize);
+	sg = creq->src;
+	sg_init_table(sg, nents);
+
+	/* Input format:
+	 * +----+----------------+
+	 * | IV | SRC sg entries |
+	 * +----+----------------+
+	 */
+
+	/* IV */
+	sg = create_single_sg(sg, iv, ivsize);
+	/* SRC entries */
+	create_multi_sg(sg, src, buflen);
+}
+
+static inline int alloc_dst_req_buf(struct nitrox_kcrypt_request *nkreq,
+				    int nents)
+{
+	int extralen = ORH_HLEN + COMP_HLEN;
+	struct se_crypto_request *creq = &nkreq->creq;
+
+	nkreq->dst = alloc_req_buf(nents, extralen, creq->gfp);
+	if (!nkreq->dst)
+		return -ENOMEM;
+
+	return 0;
+}
+
+static inline void nitrox_creq_set_orh(struct nitrox_kcrypt_request *nkreq)
+{
+	struct se_crypto_request *creq = &nkreq->creq;
+
+	creq->orh = (u64 *)(nkreq->dst);
+	set_orh_value(creq->orh);
+}
+
+static inline void nitrox_creq_set_comp(struct nitrox_kcrypt_request *nkreq)
+{
+	struct se_crypto_request *creq = &nkreq->creq;
+
+	creq->comp = (u64 *)(nkreq->dst + ORH_HLEN);
+	set_comp_value(creq->comp);
+}
+
+static inline struct scatterlist *nitrox_creq_dst_sg(char *dst)
+{
+	return (struct scatterlist *)(dst + ORH_HLEN + COMP_HLEN);
+}
+
+static inline void nitrox_creq_set_dst_sg(struct nitrox_kcrypt_request *nkreq,
+					  int nents, int ivsize,
+					  struct scatterlist *dst, int buflen)
+{
+	struct se_crypto_request *creq = &nkreq->creq;
+	struct scatterlist *sg;
+	char *iv = nkreq->src;
+
+	creq->dst = nitrox_creq_dst_sg(nkreq->dst);
+	sg = creq->dst;
+	sg_init_table(sg, nents);
+
+	/* Output format:
+	 * +-----+----+----------------+-----------------+
+	 * | ORH | IV | DST sg entries | COMPLETION Bytes|
+	 * +-----+----+----------------+-----------------+
+	 */
+
+	/* ORH */
+	sg = create_single_sg(sg, creq->orh, ORH_HLEN);
+	/* IV */
+	sg = create_single_sg(sg, iv, ivsize);
+	/* DST entries */
+	sg = create_multi_sg(sg, dst, buflen);
+	/* COMPLETION Bytes */
+	create_single_sg(sg, creq->comp, COMP_HLEN);
+}
+
+#endif /* __NITROX_REQ_H */