Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

179 files changed, 73106 insertions, 0 deletions

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
new file mode 100644
index 000000000..39f3e1366
--- /dev/null
+++ b/drivers/gpio/Kconfig
@@ -0,0 +1,1620 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# GPIO infrastructure and drivers
+#
+
+config ARCH_HAVE_CUSTOM_GPIO_H
+	bool
+	help
+	  Selecting this config option from the architecture Kconfig allows
+	  the architecture to provide a custom asm/gpio.h implementation
+	  overriding the default implementations.  New uses of this are
+	  strongly discouraged.
+
+menuconfig GPIOLIB
+	bool "GPIO Support"
+	help
+	  This enables GPIO support through the generic GPIO library.
+	  You only need to enable this, if you also want to enable
+	  one or more of the GPIO drivers below.
+
+	  If unsure, say N.
+
+if GPIOLIB
+
+config GPIOLIB_FASTPATH_LIMIT
+	int "Maximum number of GPIOs for fast path"
+	range 32 512
+	default 512
+	help
+	  This adjusts the point at which certain APIs will switch from
+	  using a stack allocated buffer to a dynamically allocated buffer.
+
+	  You shouldn't need to change this unless you really need to
+	  optimize either stack space or performance. Change this carefully
+	  since setting an incorrect value could cause stack corruption.
+
+config OF_GPIO
+	def_bool y
+	depends on OF
+	depends on HAS_IOMEM
+
+config GPIO_ACPI
+	def_bool y
+	depends on ACPI
+
+config GPIOLIB_IRQCHIP
+	select IRQ_DOMAIN
+	bool
+
+config DEBUG_GPIO
+	bool "Debug GPIO calls"
+	depends on DEBUG_KERNEL
+	help
+	  Say Y here to add some extra checks and diagnostics to GPIO calls.
+	  These checks help ensure that GPIOs have been properly initialized
+	  before they are used, and that sleeping calls are not made from
+	  non-sleeping contexts.  They can make bitbanged serial protocols
+	  slower.  The diagnostics help catch the type of setup errors
+	  that are most common when setting up new platforms or boards.
+
+config GPIO_SYSFS
+	bool "/sys/class/gpio/... (sysfs interface)"
+	depends on SYSFS
+	help
+	  Say Y here to add the legacy sysfs interface for GPIOs.
+
+	  This ABI is deprecated. If you want to use GPIO from userspace,
+	  use the character device /dev/gpiochipN with the appropriate
+	  ioctl() operations instead.
+
+config GPIO_CDEV
+	bool
+	prompt "Character device (/dev/gpiochipN) support" if EXPERT
+	default y
+	help
+	  Say Y here to add the character device /dev/gpiochipN interface
+	  for GPIOs. The character device allows userspace to control GPIOs
+	  using ioctl() operations.
+
+	  Only say N if you are sure that the GPIO character device is not
+	  required.
+
+	  If unsure, say Y.
+
+config GPIO_CDEV_V1
+	bool "Support GPIO ABI Version 1"
+	default y
+	depends on GPIO_CDEV
+	help
+	  Say Y here to support version 1 of the GPIO CDEV ABI.
+
+	  This ABI version is deprecated.
+	  Please use the latest ABI for new developments.
+
+	  If unsure, say Y.
+
+config GPIO_GENERIC
+	depends on HAS_IOMEM # Only for IOMEM drivers
+	tristate
+
+config GPIO_REGMAP
+	select REGMAP
+	tristate
+
+# put drivers in the right section, in alphabetical order
+
+# This symbol is selected by both I2C and SPI expanders
+config GPIO_MAX730X
+	tristate
+
+menu "Memory mapped GPIO drivers"
+	depends on HAS_IOMEM
+
+config GPIO_74XX_MMIO
+	tristate "GPIO driver for 74xx-ICs with MMIO access"
+	depends on OF_GPIO
+	select GPIO_GENERIC
+	help
+	  Say yes here to support GPIO functionality for 74xx-compatible ICs
+	  with MMIO access. Compatible models include:
+	    1 bit:	741G125 (Input), 741G74 (Output)
+	    2 bits:	742G125 (Input), 7474 (Output)
+	    4 bits:	74125 (Input), 74175 (Output)
+	    6 bits:	74365 (Input), 74174 (Output)
+	    8 bits:	74244 (Input), 74273 (Output)
+	    16 bits:	741624 (Input), 7416374 (Output)
+
+config GPIO_ALTERA
+	tristate "Altera GPIO"
+	depends on OF_GPIO
+	select GPIOLIB_IRQCHIP
+	help
+	  Say Y or M here to build support for the Altera PIO device.
+
+	  If driver is built as a module it will be called gpio-altera.
+
+config GPIO_AMDPT
+	tristate "AMD Promontory GPIO support"
+	depends on ACPI
+	select GPIO_GENERIC
+	help
+	  driver for GPIO functionality on Promontory IOHub
+	  Require ACPI ASL code to enumerate as a platform device.
+
+config GPIO_ASPEED
+	tristate "Aspeed GPIO support"
+	depends on (ARCH_ASPEED || COMPILE_TEST) && OF_GPIO
+	select GPIOLIB_IRQCHIP
+	help
+	  Say Y here to support Aspeed AST2400 and AST2500 GPIO controllers.
+
+config GPIO_ASPEED_SGPIO
+	bool "Aspeed SGPIO support"
+	depends on (ARCH_ASPEED || COMPILE_TEST) && OF_GPIO
+	select GPIO_GENERIC
+	select GPIOLIB_IRQCHIP
+	help
+	  Say Y here to support Aspeed AST2500 SGPIO functionality.
+
+config GPIO_ATH79
+	tristate "Atheros AR71XX/AR724X/AR913X GPIO support"
+	default y if ATH79
+	depends on ATH79 || COMPILE_TEST
+	select GPIO_GENERIC
+	select GPIOLIB_IRQCHIP
+	help
+	  Select this option to enable GPIO driver for
+	  Atheros AR71XX/AR724X/AR913X SoC devices.
+
+config GPIO_RASPBERRYPI_EXP
+	tristate "Raspberry Pi 3 GPIO Expander"
+	default RASPBERRYPI_FIRMWARE
+	depends on OF_GPIO
+	# Make sure not 'y' when RASPBERRYPI_FIRMWARE is 'm'. This can only
+	# happen when COMPILE_TEST=y, hence the added !RASPBERRYPI_FIRMWARE.
+	depends on (ARCH_BCM2835 && RASPBERRYPI_FIRMWARE) || (COMPILE_TEST && !RASPBERRYPI_FIRMWARE)
+	help
+	  Turn on GPIO support for the expander on Raspberry Pi 3 boards, using
+	  the firmware mailbox to communicate with VideoCore on BCM283x chips.
+
+config GPIO_BCM_KONA
+	bool "Broadcom Kona GPIO"
+	depends on OF_GPIO && (ARCH_BCM_MOBILE || COMPILE_TEST)
+	help
+	  Turn on GPIO support for Broadcom "Kona" chips.
+
+config GPIO_BCM_XGS_IPROC
+	tristate "BRCM XGS iProc GPIO support"
+	depends on OF_GPIO && (ARCH_BCM_IPROC || COMPILE_TEST)
+	select GPIO_GENERIC
+	select GPIOLIB_IRQCHIP
+	default ARCH_BCM_IPROC
+	help
+	  Say yes here to enable GPIO support for Broadcom XGS iProc SoCs.
+
+config GPIO_BRCMSTB
+	tristate "BRCMSTB GPIO support"
+	default y if (ARCH_BRCMSTB || BMIPS_GENERIC)
+	depends on OF_GPIO && (ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST)
+	select GPIO_GENERIC
+	select IRQ_DOMAIN
+	help
+	  Say yes here to enable GPIO support for Broadcom STB (BCM7XXX) SoCs.
+
+config GPIO_CADENCE
+	tristate "Cadence GPIO support"
+	depends on OF_GPIO
+	select GPIO_GENERIC
+	select GPIOLIB_IRQCHIP
+	help
+	  Say yes here to enable support for Cadence GPIO controller.
+
+config GPIO_CLPS711X
+	tristate "CLPS711X GPIO support"
+	depends on ARCH_CLPS711X || COMPILE_TEST
+	select GPIO_GENERIC
+	help
+	  Say yes here to support GPIO on CLPS711X SoCs.
+
+config GPIO_DAVINCI
+	bool "TI Davinci/Keystone GPIO support"
+	default y if ARCH_DAVINCI
+	depends on (ARM || ARM64) && (ARCH_DAVINCI || ARCH_KEYSTONE || ARCH_K3)
+	help
+	  Say yes here to enable GPIO support for TI Davinci/Keystone SoCs.
+
+config GPIO_DWAPB
+	tristate "Synopsys DesignWare APB GPIO driver"
+	select GPIO_GENERIC
+	select GPIOLIB_IRQCHIP
+	help
+	  Say Y or M here to build support for the Synopsys DesignWare APB
+	  GPIO block.
+
+config GPIO_EIC_SPRD
+	tristate "Spreadtrum EIC support"
+	depends on ARCH_SPRD || COMPILE_TEST
+	depends on OF_GPIO
+	select GPIOLIB_IRQCHIP
+	help
+	  Say yes here to support Spreadtrum EIC device.
+
+config GPIO_EM
+	tristate "Emma Mobile GPIO"
+	depends on (ARCH_EMEV2 || COMPILE_TEST) && OF_GPIO
+	help
+	  Say yes here to support GPIO on Renesas Emma Mobile SoCs.
+
+config GPIO_EP93XX
+	def_bool y
+	depends on ARCH_EP93XX
+	select GPIO_GENERIC
+	select GPIOLIB_IRQCHIP
+
+config GPIO_EXAR
+	tristate "Support for GPIO pins on XR17V352/354/358"
+	depends on SERIAL_8250_EXAR
+	help
+	  Selecting this option will enable handling of GPIO pins present
+	  on Exar XR17V352/354/358 chips.
+
+config GPIO_GE_FPGA
+	bool "GE FPGA based GPIO"
+	depends on GE_FPGA
+	select GPIO_GENERIC
+	help
+	  Support for common GPIO functionality provided on some GE Single Board
+	  Computers.
+
+	  This driver provides basic support (configure as input or output, read
+	  and write pin state) for GPIO implemented in a number of GE single
+	  board computers.
+
+config GPIO_FTGPIO010
+	bool "Faraday FTGPIO010 GPIO"
+	depends on OF_GPIO
+	select GPIO_GENERIC
+	select GPIOLIB_IRQCHIP
+	default (ARCH_GEMINI || ARCH_MOXART)
+	help
+	  Support for common GPIOs from the Faraday FTGPIO010 IP core, found in
+	  Cortina systems Gemini platforms, Moxa ART and others.
+
+config GPIO_GENERIC_PLATFORM
+	tristate "Generic memory-mapped GPIO controller support (MMIO platform device)"
+	select GPIO_GENERIC
+	help
+	  Say yes here to support basic platform_device memory-mapped GPIO controllers.
+
+config GPIO_GRGPIO
+	tristate "Aeroflex Gaisler GRGPIO support"
+	depends on OF_GPIO
+	select GPIO_GENERIC
+	select IRQ_DOMAIN
+	help
+	  Select this to support Aeroflex Gaisler GRGPIO cores from the GRLIB
+	  VHDL IP core library.
+
+config GPIO_HLWD
+	tristate "Nintendo Wii (Hollywood) GPIO"
+	depends on OF_GPIO
+	select GPIO_GENERIC
+	select GPIOLIB_IRQCHIP
+	help
+	  Select this to support the GPIO controller of the Nintendo Wii.
+
+	  If unsure, say N.
+
+config GPIO_ICH
+	tristate "Intel ICH GPIO"
+	depends on PCI && X86
+	select MFD_CORE
+	select LPC_ICH
+	help
+	  Say yes here to support the GPIO functionality of a number of Intel
+	  ICH-based chipsets.  Currently supported devices: ICH6, ICH7, ICH8
+	  ICH9, ICH10, Series 5/3400 (eg Ibex Peak), Series 6/C200 (eg
+	  Cougar Point), NM10 (Tiger Point), and 3100 (Whitmore Lake).
+
+	  If unsure, say N.
+
+config GPIO_IOP
+	tristate "Intel IOP GPIO"
+	depends on ARCH_IOP32X || COMPILE_TEST
+	select GPIO_GENERIC
+	help
+	  Say yes here to support the GPIO functionality of a number of Intel
+	  IOP32X or IOP33X.
+
+	  If unsure, say N.
+
+config GPIO_IXP4XX
+	bool "Intel IXP4xx GPIO"
+	depends on ARM # For <asm/mach-types.h>
+	depends on ARCH_IXP4XX
+	select GPIO_GENERIC
+	select GPIOLIB_IRQCHIP
+	select IRQ_DOMAIN_HIERARCHY
+	help
+	  Say yes here to support the GPIO functionality of a number of Intel
+	  IXP4xx series of chips.
+
+	  If unsure, say N.
+config GPIO_LOGICVC
+	tristate "Xylon LogiCVC GPIO support"
+	depends on MFD_SYSCON && OF
+	help
+	  Say yes here to support GPIO functionality of the Xylon LogiCVC
+	  programmable logic block.
+
+config GPIO_LOONGSON
+	bool "Loongson-2/3 GPIO support"
+	depends on CPU_LOONGSON2EF || CPU_LOONGSON64
+	help
+	  driver for GPIO functionality on Loongson-2F/3A/3B processors.
+
+config GPIO_LPC18XX
+	tristate "NXP LPC18XX/43XX GPIO support"
+	default y if ARCH_LPC18XX
+	depends on OF_GPIO && (ARCH_LPC18XX || COMPILE_TEST)
+	select IRQ_DOMAIN_HIERARCHY
+	help
+	  Select this option to enable GPIO driver for
+	  NXP LPC18XX/43XX devices.
+
+config GPIO_LPC32XX
+	tristate "NXP LPC32XX GPIO support"
+	depends on OF_GPIO && (ARCH_LPC32XX || COMPILE_TEST)
+	help
+	  Select this option to enable GPIO driver for
+	  NXP LPC32XX devices.
+
+config GPIO_MB86S7X
+	tristate "GPIO support for Fujitsu MB86S7x Platforms"
+	help
+	  Say yes here to support the GPIO controller in Fujitsu MB86S70 SoCs.
+
+config GPIO_MENZ127
+	tristate "MEN 16Z127 GPIO support"
+	depends on MCB
+	select GPIO_GENERIC
+	help
+	  Say yes here to support the MEN 16Z127 GPIO Controller
+
+config GPIO_MM_LANTIQ
+	bool "Lantiq Memory mapped GPIOs"
+	depends on LANTIQ && SOC_XWAY
+	help
+	  This enables support for memory mapped GPIOs on the External Bus Unit
+	  (EBU) found on Lantiq SoCs. The gpios are output only as they are
+	  created by attaching a 16bit latch to the bus.
+
+config GPIO_MPC5200
+	def_bool y
+	depends on PPC_MPC52xx
+
+config GPIO_MPC8XXX
+	bool "MPC512x/MPC8xxx/QorIQ GPIO support"
+	depends on PPC_MPC512x || PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || \
+		   FSL_SOC_BOOKE || PPC_86xx || ARCH_LAYERSCAPE || ARM || \
+		   COMPILE_TEST
+	select GPIO_GENERIC
+	select IRQ_DOMAIN
+	help
+	  Say Y here if you're going to use hardware that connects to the
+	  MPC512x/831x/834x/837x/8572/8610/QorIQ GPIOs.
+
+config GPIO_MT7621
+	bool "Mediatek MT7621 GPIO Support"
+	depends on SOC_MT7620 || SOC_MT7621 || COMPILE_TEST
+	depends on OF_GPIO
+	select GPIO_GENERIC
+	select GPIOLIB_IRQCHIP
+	help
+	  Say yes here to support the Mediatek MT7621 SoC GPIO device
+
+config GPIO_MVEBU
+	def_bool y
+	depends on PLAT_ORION || ARCH_MVEBU
+	depends on OF_GPIO
+	select GENERIC_IRQ_CHIP
+	select REGMAP_MMIO
+
+config GPIO_MXC
+	tristate "i.MX GPIO support"
+	depends on ARCH_MXC || COMPILE_TEST
+	select GPIO_GENERIC
+	select GENERIC_IRQ_CHIP
+
+config GPIO_MXS
+	bool "Freescale MXS GPIO support" if COMPILE_TEST
+	depends on ARCH_MXS || COMPILE_TEST
+	default y if ARCH_MXS
+	select GPIO_GENERIC
+	select GENERIC_IRQ_CHIP
+
+config GPIO_OCTEON
+	tristate "Cavium OCTEON GPIO"
+	depends on CAVIUM_OCTEON_SOC
+	default y
+	help
+	  Say yes here to support the on-chip GPIO lines on the OCTEON
+	  family of SOCs.
+
+config GPIO_OMAP
+	tristate "TI OMAP GPIO support" if ARCH_OMAP2PLUS || COMPILE_TEST
+	default y if ARCH_OMAP
+	depends on ARM
+	select GENERIC_IRQ_CHIP
+	select GPIOLIB_IRQCHIP
+	help
+	  Say yes here to enable GPIO support for TI OMAP SoCs.
+
+config GPIO_PL061
+	tristate "PrimeCell PL061 GPIO support"
+	depends on ARM_AMBA
+	select IRQ_DOMAIN
+	select GPIOLIB_IRQCHIP
+	help
+	  Say yes here to support the PrimeCell PL061 GPIO device
+
+config GPIO_PMIC_EIC_SPRD
+	tristate "Spreadtrum PMIC EIC support"
+	depends on MFD_SC27XX_PMIC || COMPILE_TEST
+	depends on OF_GPIO
+	select GPIOLIB_IRQCHIP
+	help
+	  Say yes here to support Spreadtrum PMIC EIC device.
+
+config GPIO_PXA
+	bool "PXA GPIO support"
+	depends on ARCH_PXA || ARCH_MMP || COMPILE_TEST
+	help
+	  Say yes here to support the PXA GPIO device
+
+config GPIO_RCAR
+	tristate "Renesas R-Car GPIO"
+	depends on ARCH_RENESAS || COMPILE_TEST
+	select GPIOLIB_IRQCHIP
+	help
+	  Say yes here to support GPIO on Renesas R-Car SoCs.
+
+config GPIO_RDA
+	bool "RDA Micro GPIO controller support"
+	depends on ARCH_RDA || COMPILE_TEST
+	depends on OF_GPIO
+	select GPIO_GENERIC
+	select GPIOLIB_IRQCHIP
+	help
+	  Say Y here to support RDA Micro GPIO controller.
+
+config GPIO_REG
+	bool
+	help
+	  A 32-bit single register GPIO fixed in/out implementation.  This
+	  can be used to represent any register as a set of GPIO signals.
+
+config GPIO_SAMA5D2_PIOBU
+	tristate "SAMA5D2 PIOBU GPIO support"
+	depends on MFD_SYSCON
+	depends on OF_GPIO
+	select GPIO_SYSCON
+	help
+	  Say yes here to use the PIOBU pins as GPIOs.
+
+	  PIOBU pins on the SAMA5D2 can be used as GPIOs.
+	  The difference from regular GPIOs is that they
+	  maintain their value during backup/self-refresh.
+
+config GPIO_SIFIVE
+	bool "SiFive GPIO support"
+	depends on OF_GPIO
+	select IRQ_DOMAIN_HIERARCHY
+	select GPIO_GENERIC
+	select GPIOLIB_IRQCHIP
+	select REGMAP_MMIO
+	help
+	  Say yes here to support the GPIO device on SiFive SoCs.
+
+config GPIO_SIOX
+	tristate "SIOX GPIO support"
+	depends on SIOX
+	select GPIOLIB_IRQCHIP
+	help
+	  Say yes here to support SIOX I/O devices. These are units connected
+	  via a SIOX bus and have a number of fixed-direction I/O lines.
+
+config GPIO_SNPS_CREG
+	bool "Synopsys GPIO via CREG (Control REGisters) driver"
+	depends on ARC || COMPILE_TEST
+	depends on OF_GPIO
+	help
+	  This driver supports GPIOs via CREG on various Synopsys SoCs.
+	  This is a single-register MMIO GPIO driver for complex cases
+	  where only several fields in register belong to GPIO lines and
+	  each GPIO line owns a field with different length and on/off value.
+
+config GPIO_SPEAR_SPICS
+	bool "ST SPEAr13xx SPI Chip Select as GPIO support"
+	depends on PLAT_SPEAR
+	select GENERIC_IRQ_CHIP
+	help
+	  Say yes here to support ST SPEAr SPI Chip Select as GPIO device
+
+config GPIO_SPRD
+	tristate "Spreadtrum GPIO support"
+	depends on ARCH_SPRD || COMPILE_TEST
+	depends on OF_GPIO
+	select GPIOLIB_IRQCHIP
+	help
+	  Say yes here to support Spreadtrum GPIO device.
+
+config GPIO_STA2X11
+	bool "STA2x11/ConneXt GPIO support"
+	depends on MFD_STA2X11
+	select GENERIC_IRQ_CHIP
+	help
+	  Say yes here to support the STA2x11/ConneXt GPIO device.
+	  The GPIO module has 128 GPIO pins with alternate functions.
+
+config GPIO_STP_XWAY
+	bool "XWAY STP GPIOs"
+	depends on SOC_XWAY || COMPILE_TEST
+	depends on OF_GPIO
+	help
+	  This enables support for the Serial To Parallel (STP) unit found on
+	  XWAY SoC. The STP allows the SoC to drive a shift registers cascade,
+	  that can be up to 24 bit. This peripheral is aimed at driving leds.
+	  Some of the gpios/leds can be auto updated by the soc with dsl and
+	  phy status.
+
+config GPIO_SYSCON
+	tristate "GPIO based on SYSCON"
+	depends on MFD_SYSCON && OF
+	help
+	  Say yes here to support GPIO functionality though SYSCON driver.
+
+config GPIO_TB10X
+	bool
+	select GPIO_GENERIC
+	select GENERIC_IRQ_CHIP
+	select OF_GPIO
+
+config GPIO_TEGRA
+	bool "NVIDIA Tegra GPIO support"
+	default ARCH_TEGRA
+	depends on ARCH_TEGRA || COMPILE_TEST
+	depends on OF_GPIO
+	help
+	  Say yes here to support GPIO pins on NVIDIA Tegra SoCs.
+
+config GPIO_TEGRA186
+	tristate "NVIDIA Tegra186 GPIO support"
+	default ARCH_TEGRA_186_SOC || ARCH_TEGRA_194_SOC
+	depends on ARCH_TEGRA_186_SOC || ARCH_TEGRA_194_SOC || COMPILE_TEST
+	depends on OF_GPIO
+	select GPIOLIB_IRQCHIP
+	select IRQ_DOMAIN_HIERARCHY
+	help
+	  Say yes here to support GPIO pins on NVIDIA Tegra186 SoCs.
+
+config GPIO_TS4800
+	tristate "TS-4800 DIO blocks and compatibles"
+	depends on OF_GPIO
+	depends on SOC_IMX51 || COMPILE_TEST
+	select GPIO_GENERIC
+	help
+	  This driver support TS-4800 FPGA GPIO controllers.
+
+config GPIO_THUNDERX
+	tristate "Cavium ThunderX/OCTEON-TX GPIO"
+	depends on ARCH_THUNDER || (64BIT && COMPILE_TEST)
+	depends on PCI_MSI
+	select GPIOLIB_IRQCHIP
+	select IRQ_DOMAIN_HIERARCHY
+	select IRQ_FASTEOI_HIERARCHY_HANDLERS
+	help
+	  Say yes here to support the on-chip GPIO lines on the ThunderX
+	  and OCTEON-TX families of SoCs.
+
+config GPIO_UNIPHIER
+	tristate "UniPhier GPIO support"
+	depends on ARCH_UNIPHIER || COMPILE_TEST
+	depends on OF_GPIO
+	select IRQ_DOMAIN_HIERARCHY
+	help
+	  Say yes here to support UniPhier GPIOs.
+
+config GPIO_VF610
+	def_bool y
+	depends on ARCH_MXC && SOC_VF610
+	select GPIOLIB_IRQCHIP
+	help
+	  Say yes here to support Vybrid vf610 GPIOs.
+
+config GPIO_VR41XX
+	tristate "NEC VR4100 series General-purpose I/O Uint support"
+	depends on CPU_VR41XX
+	help
+	  Say yes here to support the NEC VR4100 series General-purpose I/O Uint
+
+config GPIO_VX855
+	tristate "VIA VX855/VX875 GPIO"
+	depends on (X86 || COMPILE_TEST) && PCI
+	select MFD_CORE
+	select MFD_VX855
+	help
+	  Support access to the VX855/VX875 GPIO lines through the gpio library.
+
+	  This driver provides common support for accessing the device,
+	  additional drivers must be enabled in order to use the
+	  functionality of the device.
+
+config GPIO_WCD934X
+	tristate "Qualcomm Technologies Inc WCD9340/WCD9341 gpio controller driver"
+	depends on MFD_WCD934X && OF_GPIO
+	help
+         This driver is to supprot GPIO block found on the Qualcomm Technologies
+	 Inc WCD9340/WCD9341 Audio Codec.
+
+config GPIO_XGENE
+	bool "APM X-Gene GPIO controller support"
+	depends on ARM64 && OF_GPIO
+	help
+	  This driver is to support the GPIO block within the APM X-Gene SoC
+	  platform's generic flash controller. The GPIO pins are muxed with
+	  the generic flash controller's address and data pins. Say yes
+	  here to enable the GFC GPIO functionality.
+
+config GPIO_XGENE_SB
+	tristate "APM X-Gene GPIO standby controller support"
+	depends on (ARCH_XGENE || COMPILE_TEST)
+	select GPIO_GENERIC
+	select GPIOLIB_IRQCHIP
+	select IRQ_DOMAIN_HIERARCHY
+	help
+	  This driver supports the GPIO block within the APM X-Gene
+	  Standby Domain. Say yes here to enable the GPIO functionality.
+
+config GPIO_XILINX
+	tristate "Xilinx GPIO support"
+	help
+	  Say yes here to support the Xilinx FPGA GPIO device
+
+config GPIO_XLP
+	tristate "Netlogic XLP GPIO support"
+	depends on OF_GPIO && (CPU_XLP || ARCH_THUNDER2 || COMPILE_TEST)
+	select GPIOLIB_IRQCHIP
+	help
+	  This driver provides support for GPIO interface on Netlogic XLP MIPS64
+	  SoCs. Currently supported XLP variants are XLP8XX, XLP3XX, XLP2XX,
+	  XLP9XX and XLP5XX. The same GPIO controller block is also present in
+	  Cavium's ThunderX2 CN99XX SoCs.
+
+	  If unsure, say N.
+
+config GPIO_XTENSA
+	bool "Xtensa GPIO32 support"
+	depends on XTENSA
+	depends on HAVE_XTENSA_GPIO32
+	depends on !SMP
+	help
+	  Say yes here to support the Xtensa internal GPIO32 IMPWIRE (input)
+	  and EXPSTATE (output) ports
+
+config GPIO_ZEVIO
+	bool "LSI ZEVIO SoC memory mapped GPIOs"
+	depends on ARM && OF_GPIO
+	help
+	  Say yes here to support the GPIO controller in LSI ZEVIO SoCs.
+
+config GPIO_ZYNQ
+	tristate "Xilinx Zynq GPIO support"
+	depends on ARCH_ZYNQ || ARCH_ZYNQMP
+	select GPIOLIB_IRQCHIP
+	help
+	  Say yes here to support Xilinx Zynq GPIO controller.
+
+config GPIO_ZX
+	bool "ZTE ZX GPIO support"
+	depends on ARCH_ZX || COMPILE_TEST
+	select GPIOLIB_IRQCHIP
+	help
+	  Say yes here to support the GPIO device on ZTE ZX SoCs.
+
+config GPIO_LOONGSON1
+	tristate "Loongson1 GPIO support"
+	depends on MACH_LOONGSON32
+	select GPIO_GENERIC
+	help
+	  Say Y or M here to support GPIO on Loongson1 SoCs.
+
+config GPIO_AMD_FCH
+	tristate "GPIO support for AMD Fusion Controller Hub (G-series SOCs)"
+	help
+	  This option enables driver for GPIO on AMDs Fusion Controller Hub,
+	  as found on G-series SOCs (eg. GX-412TC)
+
+	  Note: This driver doesn't registers itself automatically, as it
+	  needs to be provided with platform specific configuration.
+	  (See eg. CONFIG_PCENGINES_APU2.)
+endmenu
+
+menu "Port-mapped I/O GPIO drivers"
+	depends on X86 # Unconditional I/O space access
+
+config GPIO_104_DIO_48E
+	tristate "ACCES 104-DIO-48E GPIO support"
+	depends on PC104
+	select ISA_BUS_API
+	select GPIOLIB_IRQCHIP
+	help
+	  Enables GPIO support for the ACCES 104-DIO-48E series (104-DIO-48E,
+	  104-DIO-24E). The base port addresses for the devices may be
+	  configured via the base module parameter. The interrupt line numbers
+	  for the devices may be configured via the irq module parameter.
+
+config GPIO_104_IDIO_16
+	tristate "ACCES 104-IDIO-16 GPIO support"
+	depends on PC104
+	select ISA_BUS_API
+	select GPIOLIB_IRQCHIP
+	help
+	  Enables GPIO support for the ACCES 104-IDIO-16 family (104-IDIO-16,
+	  104-IDIO-16E, 104-IDO-16, 104-IDIO-8, 104-IDIO-8E, 104-IDO-8). The
+	  base port addresses for the devices may be configured via the base
+	  module parameter. The interrupt line numbers for the devices may be
+	  configured via the irq module parameter.
+
+config GPIO_104_IDI_48
+	tristate "ACCES 104-IDI-48 GPIO support"
+	depends on PC104
+	select ISA_BUS_API
+	select GPIOLIB_IRQCHIP
+	help
+	  Enables GPIO support for the ACCES 104-IDI-48 family (104-IDI-48A,
+	  104-IDI-48AC, 104-IDI-48B, 104-IDI-48BC). The base port addresses for
+	  the devices may be configured via the base module parameter. The
+	  interrupt line numbers for the devices may be configured via the irq
+	  module parameter.
+
+config GPIO_F7188X
+	tristate "F71869, F71869A, F71882FG, F71889F and F81866 GPIO support"
+	help
+	  This option enables support for GPIOs found on Fintek Super-I/O
+	  chips F71869, F71869A, F71882FG, F71889F and F81866.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called f7188x-gpio.
+
+config GPIO_GPIO_MM
+	tristate "Diamond Systems GPIO-MM GPIO support"
+	depends on PC104
+	select ISA_BUS_API
+	help
+	  Enables GPIO support for the Diamond Systems GPIO-MM and GPIO-MM-12.
+
+	  The Diamond Systems GPIO-MM device features 48 lines of digital I/O
+	  via the emulation of dual 82C55A PPI chips. This driver provides GPIO
+	  support for these 48 channels of digital I/O.
+
+	  The base port addresses for the devices may be configured via the base
+	  array module parameter.
+
+config GPIO_IT87
+	tristate "IT87xx GPIO support"
+	help
+	  Say yes here to support GPIO functionality of IT87xx Super I/O chips.
+
+	  This driver is tested with ITE IT8728 and IT8732 Super I/O chips, and
+	  supports the IT8761E, IT8613, IT8620E, and IT8628E Super I/O chips as
+	  well.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called gpio_it87
+
+config GPIO_SCH
+	tristate "Intel SCH/TunnelCreek/Centerton/Quark X1000 GPIO"
+	depends on (X86 || COMPILE_TEST) && PCI
+	select MFD_CORE
+	select LPC_SCH
+	help
+	  Say yes here to support GPIO interface on Intel Poulsbo SCH,
+	  Intel Tunnel Creek processor, Intel Centerton processor or
+	  Intel Quark X1000 SoC.
+
+	  The Intel SCH contains a total of 14 GPIO pins. Ten GPIOs are
+	  powered by the core power rail and are turned off during sleep
+	  modes (S3 and higher). The remaining four GPIOs are powered by
+	  the Intel SCH suspend power supply. These GPIOs remain
+	  active during S3. The suspend powered GPIOs can be used to wake the
+	  system from the Suspend-to-RAM state.
+
+	  The Intel Tunnel Creek processor has 5 GPIOs powered by the
+	  core power rail and 9 from suspend power supply.
+
+	  The Intel Centerton processor has a total of 30 GPIO pins.
+	  Twenty-one are powered by the core power rail and 9 from the
+	  suspend power supply.
+
+	  The Intel Quark X1000 SoC has 2 GPIOs powered by the core
+	  power well and 6 from the suspend power well.
+
+config GPIO_SCH311X
+	tristate "SMSC SCH311x SuperI/O GPIO"
+	help
+	  Driver to enable the GPIOs found on SMSC SMSC SCH3112, SCH3114 and
+	  SCH3116 "Super I/O" chipsets.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called gpio-sch311x.
+
+config GPIO_TS5500
+	tristate "TS-5500 DIO blocks and compatibles"
+	depends on TS5500 || COMPILE_TEST
+	help
+	  This driver supports Digital I/O exposed by pin blocks found on some
+	  Technologic Systems platforms. It includes, but is not limited to, 3
+	  blocks of the TS-5500: DIO1, DIO2 and the LCD port, and the TS-5600
+	  LCD port.
+
+config GPIO_WINBOND
+	tristate "Winbond Super I/O GPIO support"
+	select ISA_BUS_API
+	help
+	  This option enables support for GPIOs found on Winbond Super I/O
+	  chips.
+	  Currently, only W83627UHG (also known as Nuvoton NCT6627UD) is
+	  supported.
+
+	  You will need to provide a module parameter "gpios", or a
+	  boot-time parameter "gpio_winbond.gpios" with a bitmask of GPIO
+	  ports to enable (bit 0 is GPIO1, bit 1 is GPIO2, etc.).
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called gpio-winbond.
+
+config GPIO_WS16C48
+	tristate "WinSystems WS16C48 GPIO support"
+	select ISA_BUS_API
+	select GPIOLIB_IRQCHIP
+	help
+	  Enables GPIO support for the WinSystems WS16C48. The base port
+	  addresses for the devices may be configured via the base module
+	  parameter. The interrupt line numbers for the devices may be
+	  configured via the irq module parameter.
+
+endmenu
+
+menu "I2C GPIO expanders"
+	depends on I2C
+
+config GPIO_ADP5588
+	tristate "ADP5588 I2C GPIO expander"
+	help
+	  This option enables support for 18 GPIOs found
+	  on Analog Devices ADP5588 GPIO Expanders.
+
+config GPIO_ADP5588_IRQ
+	bool "Interrupt controller support for ADP5588"
+	depends on GPIO_ADP5588=y
+	select GPIOLIB_IRQCHIP
+	help
+	  Say yes here to enable the adp5588 to be used as an interrupt
+	  controller. It requires the driver to be built in the kernel.
+
+config GPIO_ADNP
+	tristate "Avionic Design N-bit GPIO expander"
+	depends on OF_GPIO
+	select GPIOLIB_IRQCHIP
+	help
+	  This option enables support for N GPIOs found on Avionic Design
+	  I2C GPIO expanders. The register space will be extended by powers
+	  of two, so the controller will need to accommodate for that. For
+	  example: if a controller provides 48 pins, 6 registers will be
+	  enough to represent all pins, but the driver will assume a
+	  register layout for 64 pins (8 registers).
+
+config GPIO_GW_PLD
+	tristate "Gateworks PLD GPIO Expander"
+	depends on OF_GPIO
+	help
+	  Say yes here to provide access to the Gateworks I2C PLD GPIO
+	  Expander. This is used at least on the Cambria GW2358-4.
+
+config GPIO_MAX7300
+	tristate "Maxim MAX7300 GPIO expander"
+	select GPIO_MAX730X
+	help
+	  GPIO driver for Maxim MAX7300 I2C-based GPIO expander.
+
+config GPIO_MAX732X
+	tristate "MAX7319, MAX7320-7327 I2C Port Expanders"
+	help
+	  Say yes here to support the MAX7319, MAX7320-7327 series of I2C
+	  Port Expanders. Each IO port on these chips has a fixed role of
+	  Input (designated by 'I'), Push-Pull Output ('O'), or Open-Drain
+	  Input and Output (designed by 'P'). The combinations are listed
+	  below:
+
+	  8 bits:       max7319 (8I), max7320 (8O), max7321 (8P),
+	                max7322 (4I4O), max7323 (4P4O)
+
+	  16 bits:      max7324 (8I8O), max7325 (8P8O),
+	                max7326 (4I12O), max7327 (4P12O)
+
+	  Board setup code must specify the model to use, and the start
+	  number for these GPIOs.
+
+config GPIO_MAX732X_IRQ
+	bool "Interrupt controller support for MAX732x"
+	depends on GPIO_MAX732X=y
+	select GPIOLIB_IRQCHIP
+	help
+	  Say yes here to enable the max732x to be used as an interrupt
+	  controller. It requires the driver to be built in the kernel.
+
+config GPIO_MC9S08DZ60
+	bool "MX35 3DS BOARD MC9S08DZ60 GPIO functions"
+	depends on I2C=y && MACH_MX35_3DS
+	help
+	  Select this to enable the MC9S08DZ60 GPIO driver
+
+config GPIO_PCA953X
+	tristate "PCA95[357]x, PCA9698, TCA64xx, and MAX7310 I/O ports"
+	select REGMAP_I2C
+	help
+	  Say yes here to provide access to several register-oriented
+	  SMBus I/O expanders, made mostly by NXP or TI.  Compatible
+	  models include:
+
+	  4 bits:       pca9536, pca9537
+
+	  8 bits:       max7310, max7315, pca6107, pca9534, pca9538, pca9554,
+	                pca9556, pca9557, pca9574, tca6408, tca9554, xra1202
+
+	  16 bits:      max7312, max7313, pca9535, pca9539, pca9555, pca9575,
+	                tca6416
+
+	  24 bits:      tca6424
+
+	  40 bits:      pca9505, pca9698
+
+config GPIO_PCA953X_IRQ
+	bool "Interrupt controller support for PCA953x"
+	depends on GPIO_PCA953X
+	select GPIOLIB_IRQCHIP
+	help
+	  Say yes here to enable the pca953x to be used as an interrupt
+	  controller. It requires the driver to be built in the kernel.
+
+config GPIO_PCA9570
+	tristate "PCA9570 4-Bit I2C GPO expander"
+	help
+	  Say yes here to enable the GPO driver for the NXP PCA9570 chip.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called gpio-pca9570.
+
+config GPIO_PCF857X
+	tristate "PCF857x, PCA{85,96}7x, and MAX732[89] I2C GPIO expanders"
+	select GPIOLIB_IRQCHIP
+	select IRQ_DOMAIN
+	help
+	  Say yes here to provide access to most "quasi-bidirectional" I2C
+	  GPIO expanders used for additional digital outputs or inputs.
+	  Most of these parts are from NXP, though TI is a second source for
+	  some of them.  Compatible models include:
+
+	  8 bits:   pcf8574, pcf8574a, pca8574, pca8574a,
+	            pca9670, pca9672, pca9674, pca9674a,
+	            max7328, max7329
+
+	  16 bits:  pcf8575, pcf8575c, pca8575,
+	            pca9671, pca9673, pca9675
+
+	  Your board setup code will need to declare the expanders in
+	  use, and assign numbers to the GPIOs they expose.  Those GPIOs
+	  can then be used from drivers and other kernel code, just like
+	  other GPIOs, but only accessible from task contexts.
+
+	  This driver provides an in-kernel interface to those GPIOs using
+	  platform-neutral GPIO calls.
+
+config GPIO_TPIC2810
+	tristate "TPIC2810 8-Bit I2C GPO expander"
+	help
+	  Say yes here to enable the GPO driver for the TI TPIC2810 chip.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called gpio-tpic2810.
+
+config GPIO_TS4900
+	tristate "Technologic Systems FPGA I2C GPIO"
+	depends on SOC_IMX6 || COMPILE_TEST
+	select REGMAP_I2C
+	help
+	  Say yes here to enabled the GPIO driver for Technologic's FPGA core.
+	  Series supported include TS-4100, TS-4900, TS-7970 and TS-7990.
+
+endmenu
+
+menu "MFD GPIO expanders"
+
+config GPIO_ADP5520
+	tristate "GPIO Support for ADP5520 PMIC"
+	depends on PMIC_ADP5520
+	help
+	  This option enables support for on-chip GPIO found
+	  on Analog Devices ADP5520 PMICs.
+
+config GPIO_ALTERA_A10SR
+	tristate "Altera Arria10 System Resource GPIO"
+	depends on MFD_ALTERA_A10SR
+	help
+	  Driver for Arria10 Development Kit GPIO expansion which
+	  includes reads of pushbuttons and DIP switches as well
+	  as writes to LEDs.
+
+config GPIO_ARIZONA
+	tristate "Wolfson Microelectronics Arizona class devices"
+	depends on MFD_ARIZONA
+	help
+	  Support for GPIOs on Wolfson Arizona class devices.
+
+config GPIO_BD70528
+	tristate "ROHM BD70528 GPIO support"
+	depends on MFD_ROHM_BD70528
+	help
+	  Support for GPIOs on ROHM BD70528 PMIC. There are four GPIOs
+	  available on the ROHM PMIC in total. The GPIOs can also
+	  generate interrupts.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called gpio-bd70528.
+
+config GPIO_BD71828
+	tristate "ROHM BD71828 GPIO support"
+	depends on MFD_ROHM_BD71828
+	help
+	  Support for GPIOs on ROHM BD71828 PMIC. There are three GPIOs
+	  available on the ROHM PMIC in total. The GPIOs are limited to
+	  outputs only and pins must be configured to GPIO outputs by
+	  OTP. Enable this only if you want to use these pins as outputs.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called gpio-bd71828.
+
+config GPIO_BD9571MWV
+	tristate "ROHM BD9571 GPIO support"
+	depends on MFD_BD9571MWV
+	help
+	  Support for GPIOs on ROHM BD9571 PMIC. There are two GPIOs
+	  available on the ROHM PMIC in total, both of which can also
+	  generate interrupts.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called gpio-bd9571mwv.
+
+config GPIO_CRYSTAL_COVE
+	tristate "GPIO support for Crystal Cove PMIC"
+	depends on (X86 || COMPILE_TEST) && INTEL_SOC_PMIC
+	select GPIOLIB_IRQCHIP
+	help
+	  Support for GPIO pins on Crystal Cove PMIC.
+
+	  Say Yes if you have a Intel SoC based tablet with Crystal Cove PMIC
+	  inside.
+
+	  This driver can also be built as a module. If so, the module will be
+	  called gpio-crystalcove.
+
+config GPIO_CS5535
+	tristate "AMD CS5535/CS5536 GPIO support"
+	depends on X86 || MIPS || COMPILE_TEST
+	depends on MFD_CS5535
+	help
+	  The AMD CS5535 and CS5536 southbridges support 28 GPIO pins that
+	  can be used for quite a number of things.  The CS5535/6 is found on
+	  AMD Geode and Lemote Yeeloong devices.
+
+	  If unsure, say N.
+
+config GPIO_DA9052
+	tristate "Dialog DA9052 GPIO"
+	depends on PMIC_DA9052
+	help
+	  Say yes here to enable the GPIO driver for the DA9052 chip.
+
+config GPIO_DA9055
+	tristate "Dialog Semiconductor DA9055 GPIO"
+	depends on MFD_DA9055
+	help
+	  Say yes here to enable the GPIO driver for the DA9055 chip.
+
+	  The Dialog DA9055 PMIC chip has 3 GPIO pins that can be
+	  be controller by this driver.
+
+	  If driver is built as a module it will be called gpio-da9055.
+
+config GPIO_DLN2
+	tristate "Diolan DLN2 GPIO support"
+	depends on MFD_DLN2
+	select GPIOLIB_IRQCHIP
+
+	help
+	  Select this option to enable GPIO driver for the Diolan DLN2
+	  board.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called gpio-dln2.
+
+config HTC_EGPIO
+	bool "HTC EGPIO support"
+	depends on ARM
+	help
+	  This driver supports the CPLD egpio chip present on
+	  several HTC phones.  It provides basic support for input
+	  pins, output pins, and irqs.
+
+config GPIO_JANZ_TTL
+	tristate "Janz VMOD-TTL Digital IO Module"
+	depends on MFD_JANZ_CMODIO
+	help
+	  This enables support for the Janz VMOD-TTL Digital IO module.
+	  This driver provides support for driving the pins in output
+	  mode only. Input mode is not supported.
+
+config GPIO_KEMPLD
+	tristate "Kontron ETX / COMexpress GPIO"
+	depends on MFD_KEMPLD
+	help
+	  This enables support for the PLD GPIO interface on some Kontron ETX
+	  and COMexpress (ETXexpress) modules.
+
+	  This driver can also be built as a module. If so, the module will be
+	  called gpio-kempld.
+
+config GPIO_LP3943
+	tristate "TI/National Semiconductor LP3943 GPIO expander"
+	depends on MFD_LP3943
+	help
+	  GPIO driver for LP3943 MFD.
+	  LP3943 can be used as a GPIO expander which provides up to 16 GPIOs.
+	  Open drain outputs are required for this usage.
+
+config GPIO_LP873X
+	tristate "TI LP873X GPO"
+	depends on MFD_TI_LP873X
+	help
+	  This driver supports the GPO on TI Lp873x PMICs. 2 GPOs are present
+	  on LP873X PMICs.
+
+	  This driver can also be built as a module. If so, the module will be
+	  called gpio-lp873x.
+
+config GPIO_LP87565
+	tristate "TI LP87565 GPIO"
+	depends on MFD_TI_LP87565
+	help
+	  This driver supports the GPIO on TI Lp873565 PMICs. 3 GPIOs are present
+	  on LP87565 PMICs.
+
+	  This driver can also be built as a module. If so, the module will be
+	  called gpio-lp87565.
+
+config GPIO_MADERA
+	tristate "Cirrus Logic Madera class codecs"
+	depends on PINCTRL_MADERA
+	help
+	  Support for GPIOs on Cirrus Logic Madera class codecs.
+
+config GPIO_MAX77620
+	tristate "GPIO support for PMIC MAX77620 and MAX20024"
+	depends on MFD_MAX77620
+	select GPIOLIB_IRQCHIP
+	help
+	  GPIO driver for MAX77620 and MAX20024 PMIC from Maxim Semiconductor.
+	  MAX77620 PMIC has 8 pins that can be configured as GPIOs. The
+	  driver also provides interrupt support for each of the gpios.
+	  Say yes here to enable the max77620 to be used as gpio controller.
+
+config GPIO_MAX77650
+	tristate "Maxim MAX77650/77651 GPIO support"
+	depends on MFD_MAX77650
+	help
+	  GPIO driver for MAX77650/77651 PMIC from Maxim Semiconductor.
+	  These chips have a single pin that can be configured as GPIO.
+
+config GPIO_MSIC
+	bool "Intel MSIC mixed signal gpio support"
+	depends on (X86 || COMPILE_TEST) && MFD_INTEL_MSIC
+	help
+	  Enable support for GPIO on intel MSIC controllers found in
+	  intel MID devices
+
+config GPIO_PALMAS
+	bool "TI PALMAS series PMICs GPIO"
+	depends on MFD_PALMAS
+	help
+	  Select this option to enable GPIO driver for the TI PALMAS
+	  series chip family.
+
+config GPIO_RC5T583
+	bool "RICOH RC5T583 GPIO"
+	depends on MFD_RC5T583
+	help
+	  Select this option to enable GPIO driver for the Ricoh RC5T583
+	  chip family.
+	  This driver provides the support for driving/reading the gpio pins
+	  of RC5T583 device through standard gpio library.
+
+config GPIO_SL28CPLD
+	tristate "Kontron sl28cpld GPIO support"
+	depends on MFD_SL28CPLD || COMPILE_TEST
+	select GPIO_REGMAP
+	select GPIOLIB_IRQCHIP
+	select REGMAP_IRQ
+	help
+	  This enables support for the GPIOs found on the Kontron sl28 CPLD.
+
+	  This driver can also be built as a module. If so, the module will be
+	  called gpio-sl28cpld.
+
+config GPIO_STMPE
+	bool "STMPE GPIOs"
+	depends on MFD_STMPE
+	depends on OF_GPIO
+	select GPIOLIB_IRQCHIP
+	help
+	  This enables support for the GPIOs found on the STMPE I/O
+	  Expanders.
+
+config GPIO_TC3589X
+	bool "TC3589X GPIOs"
+	depends on MFD_TC3589X
+	depends on OF_GPIO
+	select GPIOLIB_IRQCHIP
+	help
+	  This enables support for the GPIOs found on the TC3589X
+	  I/O Expander.
+
+config GPIO_TIMBERDALE
+	bool "Support for timberdale GPIO IP"
+	depends on MFD_TIMBERDALE
+	help
+	Add support for the GPIO IP in the timberdale FPGA.
+
+config GPIO_TPS65086
+	tristate "TI TPS65086 GPO"
+	depends on MFD_TPS65086
+	help
+	  This driver supports the GPO on TI TPS65086x PMICs.
+
+config GPIO_TPS65218
+	tristate "TPS65218 GPIO"
+	depends on MFD_TPS65218
+	help
+	  Select this option to enable GPIO driver for the TPS65218
+	  chip family.
+
+config GPIO_TPS6586X
+	bool "TPS6586X GPIO"
+	depends on MFD_TPS6586X
+	help
+	  Select this option to enable GPIO driver for the TPS6586X
+	  chip family.
+
+config GPIO_TPS65910
+	bool "TPS65910 GPIO"
+	depends on MFD_TPS65910
+	help
+	  Select this option to enable GPIO driver for the TPS65910
+	  chip family.
+
+config GPIO_TPS65912
+	tristate "TI TPS65912 GPIO"
+	depends on MFD_TPS65912
+	help
+	  This driver supports TPS65912 gpio chip
+
+config GPIO_TPS68470
+	bool "TPS68470 GPIO"
+	depends on MFD_TPS68470
+	help
+	  Select this option to enable GPIO driver for the TPS68470
+	  chip family.
+	  There are 7 GPIOs and few sensor related GPIOs supported
+	  by the TPS68470. While the 7 GPIOs can be configured as
+	  input or output as appropriate, the sensor related GPIOs
+	  are "output only" GPIOs.
+
+	  This driver config is bool, as the GPIO functionality
+	  of the TPS68470 must be available before dependent
+	  drivers are loaded.
+
+config GPIO_TQMX86
+	tristate "TQ-Systems QTMX86 GPIO"
+	depends on MFD_TQMX86 || COMPILE_TEST
+	depends on HAS_IOPORT_MAP
+	select GPIOLIB_IRQCHIP
+	help
+	  This driver supports GPIO on the TQMX86 IO controller.
+
+config GPIO_TWL4030
+	tristate "TWL4030, TWL5030, and TPS659x0 GPIOs"
+	depends on TWL4030_CORE
+	help
+	  Say yes here to access the GPIO signals of various multi-function
+	  power management chips from Texas Instruments.
+
+config GPIO_TWL6040
+	tristate "TWL6040 GPO"
+	depends on TWL6040_CORE
+	help
+	  Say yes here to access the GPO signals of twl6040
+	  audio chip from Texas Instruments.
+
+config GPIO_UCB1400
+	tristate "Philips UCB1400 GPIO"
+	depends on UCB1400_CORE
+	help
+	  This enables support for the Philips UCB1400 GPIO pins.
+	  The UCB1400 is an AC97 audio codec.
+
+config GPIO_WHISKEY_COVE
+	tristate "GPIO support for Whiskey Cove PMIC"
+	depends on (X86 || COMPILE_TEST) && INTEL_SOC_PMIC_BXTWC
+	select GPIOLIB_IRQCHIP
+	help
+	  Support for GPIO pins on Whiskey Cove PMIC.
+
+	  Say Yes if you have a Intel SoC based tablet with Whiskey Cove PMIC
+	  inside.
+
+	  This driver can also be built as a module. If so, the module will be
+	  called gpio-wcove.
+
+config GPIO_WM831X
+	tristate "WM831x GPIOs"
+	depends on MFD_WM831X
+	help
+	  Say yes here to access the GPIO signals of WM831x power management
+	  chips from Wolfson Microelectronics.
+
+config GPIO_WM8350
+	tristate "WM8350 GPIOs"
+	depends on MFD_WM8350
+	help
+	  Say yes here to access the GPIO signals of WM8350 power management
+	  chips from Wolfson Microelectronics.
+
+config GPIO_WM8994
+	tristate "WM8994 GPIOs"
+	depends on MFD_WM8994
+	help
+	  Say yes here to access the GPIO signals of WM8994 audio hub
+	  CODECs from Wolfson Microelectronics.
+
+endmenu
+
+menu "PCI GPIO expanders"
+	depends on PCI
+
+config GPIO_AMD8111
+	tristate "AMD 8111 GPIO driver"
+	depends on X86 || COMPILE_TEST
+	depends on HAS_IOPORT_MAP
+	help
+	  The AMD 8111 south bridge contains 32 GPIO pins which can be used.
+
+	  Note, that usually system firmware/ACPI handles GPIO pins on their
+	  own and users might easily break their systems with uncarefull usage
+	  of this driver!
+
+	  If unsure, say N
+
+config GPIO_BT8XX
+	tristate "BT8XX GPIO abuser"
+	depends on VIDEO_BT848=n
+	help
+	  The BT8xx frame grabber chip has 24 GPIO pins that can be abused
+	  as a cheap PCI GPIO card.
+
+	  This chip can be found on Miro, Hauppauge and STB TV-cards.
+
+	  The card needs to be physically altered for using it as a
+	  GPIO card. For more information on how to build a GPIO card
+	  from a BT8xx TV card, see the documentation file at
+	  Documentation/driver-api/gpio/bt8xxgpio.rst
+
+	  If unsure, say N.
+
+config GPIO_INTEL_MID
+	bool "Intel MID GPIO support"
+	depends on X86_INTEL_MID
+	select GPIOLIB_IRQCHIP
+	help
+	  Say Y here to support Intel MID GPIO.
+
+config GPIO_MERRIFIELD
+	tristate "Intel Merrifield GPIO support"
+	depends on X86_INTEL_MID
+	select GPIOLIB_IRQCHIP
+	help
+	  Say Y here to support Intel Merrifield GPIO.
+
+config GPIO_MLXBF
+	tristate "Mellanox BlueField SoC GPIO"
+	depends on (MELLANOX_PLATFORM && ARM64 && ACPI) || (64BIT && COMPILE_TEST)
+	select GPIO_GENERIC
+	help
+	  Say Y here if you want GPIO support on Mellanox BlueField SoC.
+
+config GPIO_MLXBF2
+	tristate "Mellanox BlueField 2 SoC GPIO"
+	depends on (MELLANOX_PLATFORM && ARM64 && ACPI) || (64BIT && COMPILE_TEST)
+	select GPIO_GENERIC
+	help
+	  Say Y here if you want GPIO support on Mellanox BlueField 2 SoC.
+
+config GPIO_ML_IOH
+	tristate "OKI SEMICONDUCTOR ML7213 IOH GPIO support"
+	depends on X86 || COMPILE_TEST
+	select GENERIC_IRQ_CHIP
+	help
+	  ML7213 is companion chip for Intel Atom E6xx series.
+	  This driver can be used for OKI SEMICONDUCTOR ML7213 IOH(Input/Output
+	  Hub) which is for IVI(In-Vehicle Infotainment) use.
+	  This driver can access the IOH's GPIO device.
+
+config GPIO_PCH
+	tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7223/ML7831) GPIO"
+	depends on X86_32 || MIPS || COMPILE_TEST
+	select GENERIC_IRQ_CHIP
+	help
+	  This driver is for PCH(Platform controller Hub) GPIO of Intel Topcliff
+	  which is an IOH(Input/Output Hub) for x86 embedded processor.
+	  This driver can access PCH GPIO device.
+
+	  This driver also can be used for LAPIS Semiconductor IOH(Input/
+	  Output Hub), ML7223 and ML7831.
+	  ML7223 IOH is for MP(Media Phone) use.
+	  ML7831 IOH is for general purpose use.
+	  ML7223/ML7831 is companion chip for Intel Atom E6xx series.
+	  ML7223/ML7831 is completely compatible for Intel EG20T PCH.
+
+config GPIO_PCI_IDIO_16
+	tristate "ACCES PCI-IDIO-16 GPIO support"
+	select GPIOLIB_IRQCHIP
+	help
+	  Enables GPIO support for the ACCES PCI-IDIO-16. An interrupt is
+	  generated when any of the inputs change state (low to high or high to
+	  low). Input filter control is not supported by this driver, and the
+	  input filters are deactivated by this driver.
+
+config GPIO_PCIE_IDIO_24
+	tristate "ACCES PCIe-IDIO-24 GPIO support"
+	select GPIOLIB_IRQCHIP
+	help
+	  Enables GPIO support for the ACCES PCIe-IDIO-24 family (PCIe-IDIO-24,
+	  PCIe-IDI-24, PCIe-IDO-24, PCIe-IDIO-12). An interrupt is generated
+	  when any of the inputs change state (low to high or high to low).
+	  Input filter control is not supported by this driver, and the input
+	  filters are deactivated by this driver.
+
+config GPIO_RDC321X
+	tristate "RDC R-321x GPIO support"
+	select MFD_CORE
+	select MFD_RDC321X
+	help
+	  Support for the RDC R321x SoC GPIOs over southbridge
+	  PCI configuration space.
+
+config GPIO_SODAVILLE
+	bool "Intel Sodaville GPIO support"
+	depends on X86 && OF
+	select GPIO_GENERIC
+	select GENERIC_IRQ_CHIP
+	help
+	  Say Y here to support Intel Sodaville GPIO.
+
+endmenu
+
+menu "SPI GPIO expanders"
+	depends on SPI_MASTER
+
+config GPIO_74X164
+	tristate "74x164 serial-in/parallel-out 8-bits shift register"
+	depends on OF_GPIO
+	help
+	  Driver for 74x164 compatible serial-in/parallel-out 8-outputs
+	  shift registers. This driver can be used to provide access
+	  to more gpio outputs.
+
+config GPIO_MAX3191X
+	tristate "Maxim MAX3191x industrial serializer"
+	select CRC8
+	help
+	  GPIO driver for Maxim MAX31910, MAX31911, MAX31912, MAX31913,
+	  MAX31953 and MAX31963 industrial serializer, a daisy-chainable
+	  chip to make 8 digital 24V inputs available via SPI.  Supports
+	  CRC checksums to guard against electromagnetic interference,
+	  as well as undervoltage and overtemperature detection.
+
+config GPIO_MAX7301
+	tristate "Maxim MAX7301 GPIO expander"
+	select GPIO_MAX730X
+	help
+	  GPIO driver for Maxim MAX7301 SPI-based GPIO expander.
+
+config GPIO_MC33880
+	tristate "Freescale MC33880 high-side/low-side switch"
+	help
+	  SPI driver for Freescale MC33880 high-side/low-side switch.
+	  This provides GPIO interface supporting inputs and outputs.
+
+config GPIO_PISOSR
+	tristate "Generic parallel-in/serial-out shift register"
+	help
+	  GPIO driver for SPI compatible parallel-in/serial-out shift
+	  registers. These are input only devices.
+
+config GPIO_XRA1403
+	tristate "EXAR XRA1403 16-bit GPIO expander"
+	select REGMAP_SPI
+	help
+	  GPIO driver for EXAR XRA1403 16-bit SPI-based GPIO expander.
+
+config GPIO_MOXTET
+	tristate "Turris Mox Moxtet bus GPIO expander"
+	depends on MOXTET
+	help
+	  Say yes here if you are building for the Turris Mox router.
+	  This is the driver needed for configuring the GPIOs via the Moxtet
+	  bus. For example the Mox module with SFP cage needs this driver
+	  so that phylink can use corresponding GPIOs.
+
+endmenu
+
+menu "USB GPIO expanders"
+	depends on USB
+
+config GPIO_VIPERBOARD
+	tristate "Viperboard GPIO a & b support"
+	depends on MFD_VIPERBOARD
+	help
+	  Say yes here to access the GPIO signals of Nano River
+	  Technologies Viperboard. There are two GPIO chips on the
+	  board: gpioa and gpiob.
+	  See viperboard API specification and Nano
+	  River Tech's viperboard.h for detailed meaning
+	  of the module parameters.
+
+endmenu
+
+config GPIO_AGGREGATOR
+	tristate "GPIO Aggregator"
+	help
+	  Say yes here to enable the GPIO Aggregator, which provides a way to
+	  aggregate existing GPIO lines into a new virtual GPIO chip.
+	  This can serve the following purposes:
+	    - Assign permissions for a collection of GPIO lines to a user,
+	    - Export a collection of GPIO lines to a virtual machine,
+	    - Provide a generic driver for a GPIO-operated device in an
+	      industrial control context, to be operated from userspace using
+	      the GPIO chardev interface.
+
+config GPIO_MOCKUP
+	tristate "GPIO Testing Driver"
+	select IRQ_SIM
+	help
+	  This enables GPIO Testing driver, which provides a way to test GPIO
+	  subsystem through sysfs(or char device) and debugfs. GPIO_SYSFS
+	  must be selected for this test.
+	  User could use it through the script in
+	  tools/testing/selftests/gpio/gpio-mockup.sh. Reference the usage in
+	  it.
+
+endif
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
new file mode 100644
index 000000000..09dada80a
--- /dev/null
+++ b/drivers/gpio/Makefile
@@ -0,0 +1,182 @@
+# SPDX-License-Identifier: GPL-2.0
+# generic gpio support: platform drivers, dedicated expander chips, etc
+
+ccflags-$(CONFIG_DEBUG_GPIO)	+= -DDEBUG
+
+obj-$(CONFIG_GPIOLIB)		+= gpiolib.o
+obj-$(CONFIG_GPIOLIB)		+= gpiolib-devres.o
+obj-$(CONFIG_GPIOLIB)		+= gpiolib-legacy.o
+obj-$(CONFIG_OF_GPIO)		+= gpiolib-of.o
+obj-$(CONFIG_GPIO_CDEV)		+= gpiolib-cdev.o
+obj-$(CONFIG_GPIO_SYSFS)	+= gpiolib-sysfs.o
+obj-$(CONFIG_GPIO_ACPI)		+= gpiolib-acpi.o
+
+# Device drivers. Generally keep list sorted alphabetically
+obj-$(CONFIG_GPIO_REGMAP)	+= gpio-regmap.o
+obj-$(CONFIG_GPIO_GENERIC)	+= gpio-generic.o
+
+# directly supported by gpio-generic
+gpio-generic-$(CONFIG_GPIO_GENERIC)	+= gpio-mmio.o
+
+obj-$(CONFIG_GPIO_104_DIO_48E)		+= gpio-104-dio-48e.o
+obj-$(CONFIG_GPIO_104_IDI_48)		+= gpio-104-idi-48.o
+obj-$(CONFIG_GPIO_104_IDIO_16)		+= gpio-104-idio-16.o
+obj-$(CONFIG_GPIO_74X164)		+= gpio-74x164.o
+obj-$(CONFIG_GPIO_74XX_MMIO)		+= gpio-74xx-mmio.o
+obj-$(CONFIG_GPIO_ADNP)			+= gpio-adnp.o
+obj-$(CONFIG_GPIO_ADP5520)		+= gpio-adp5520.o
+obj-$(CONFIG_GPIO_ADP5588)		+= gpio-adp5588.o
+obj-$(CONFIG_GPIO_AGGREGATOR)		+= gpio-aggregator.o
+obj-$(CONFIG_GPIO_ALTERA_A10SR)		+= gpio-altera-a10sr.o
+obj-$(CONFIG_GPIO_ALTERA)  		+= gpio-altera.o
+obj-$(CONFIG_GPIO_AMD8111)		+= gpio-amd8111.o
+obj-$(CONFIG_GPIO_AMD_FCH)		+= gpio-amd-fch.o
+obj-$(CONFIG_GPIO_AMDPT)		+= gpio-amdpt.o
+obj-$(CONFIG_GPIO_ARIZONA)		+= gpio-arizona.o
+obj-$(CONFIG_GPIO_ASPEED)		+= gpio-aspeed.o
+obj-$(CONFIG_GPIO_ASPEED_SGPIO)		+= gpio-aspeed-sgpio.o
+obj-$(CONFIG_GPIO_ATH79)		+= gpio-ath79.o
+obj-$(CONFIG_GPIO_BCM_KONA)		+= gpio-bcm-kona.o
+obj-$(CONFIG_GPIO_BCM_XGS_IPROC)	+= gpio-xgs-iproc.o
+obj-$(CONFIG_GPIO_BD70528)		+= gpio-bd70528.o
+obj-$(CONFIG_GPIO_BD71828)		+= gpio-bd71828.o
+obj-$(CONFIG_GPIO_BD9571MWV)		+= gpio-bd9571mwv.o
+obj-$(CONFIG_GPIO_BRCMSTB)		+= gpio-brcmstb.o
+obj-$(CONFIG_GPIO_BT8XX)		+= gpio-bt8xx.o
+obj-$(CONFIG_GPIO_CADENCE)		+= gpio-cadence.o
+obj-$(CONFIG_GPIO_CLPS711X)		+= gpio-clps711x.o
+obj-$(CONFIG_GPIO_SNPS_CREG)		+= gpio-creg-snps.o
+obj-$(CONFIG_GPIO_CRYSTAL_COVE)		+= gpio-crystalcove.o
+obj-$(CONFIG_GPIO_CS5535)		+= gpio-cs5535.o
+obj-$(CONFIG_GPIO_DA9052)		+= gpio-da9052.o
+obj-$(CONFIG_GPIO_DA9055)		+= gpio-da9055.o
+obj-$(CONFIG_GPIO_DAVINCI)		+= gpio-davinci.o
+obj-$(CONFIG_GPIO_DLN2)			+= gpio-dln2.o
+obj-$(CONFIG_GPIO_DWAPB)		+= gpio-dwapb.o
+obj-$(CONFIG_GPIO_EIC_SPRD)		+= gpio-eic-sprd.o
+obj-$(CONFIG_GPIO_EM)			+= gpio-em.o
+obj-$(CONFIG_GPIO_EP93XX)		+= gpio-ep93xx.o
+obj-$(CONFIG_GPIO_EXAR)			+= gpio-exar.o
+obj-$(CONFIG_GPIO_F7188X)		+= gpio-f7188x.o
+obj-$(CONFIG_GPIO_FTGPIO010)		+= gpio-ftgpio010.o
+obj-$(CONFIG_GPIO_GE_FPGA)		+= gpio-ge.o
+obj-$(CONFIG_GPIO_GPIO_MM)		+= gpio-gpio-mm.o
+obj-$(CONFIG_GPIO_GRGPIO)		+= gpio-grgpio.o
+obj-$(CONFIG_GPIO_GW_PLD)		+= gpio-gw-pld.o
+obj-$(CONFIG_GPIO_HLWD)			+= gpio-hlwd.o
+obj-$(CONFIG_HTC_EGPIO)			+= gpio-htc-egpio.o
+obj-$(CONFIG_GPIO_ICH)			+= gpio-ich.o
+obj-$(CONFIG_GPIO_INTEL_MID)		+= gpio-intel-mid.o
+obj-$(CONFIG_GPIO_IOP)			+= gpio-iop.o
+obj-$(CONFIG_GPIO_IT87)			+= gpio-it87.o
+obj-$(CONFIG_GPIO_IXP4XX)		+= gpio-ixp4xx.o
+obj-$(CONFIG_GPIO_JANZ_TTL)		+= gpio-janz-ttl.o
+obj-$(CONFIG_GPIO_KEMPLD)		+= gpio-kempld.o
+obj-$(CONFIG_GPIO_LOGICVC)		+= gpio-logicvc.o
+obj-$(CONFIG_GPIO_LOONGSON1)		+= gpio-loongson1.o
+obj-$(CONFIG_GPIO_LOONGSON)		+= gpio-loongson.o
+obj-$(CONFIG_GPIO_LP3943)		+= gpio-lp3943.o
+obj-$(CONFIG_GPIO_LP873X)		+= gpio-lp873x.o
+obj-$(CONFIG_GPIO_LP87565)		+= gpio-lp87565.o
+obj-$(CONFIG_GPIO_LPC18XX)		+= gpio-lpc18xx.o
+obj-$(CONFIG_GPIO_LPC32XX)		+= gpio-lpc32xx.o
+obj-$(CONFIG_GPIO_MADERA)		+= gpio-madera.o
+obj-$(CONFIG_GPIO_MAX3191X)		+= gpio-max3191x.o
+obj-$(CONFIG_GPIO_MAX7300)		+= gpio-max7300.o
+obj-$(CONFIG_GPIO_MAX7301)		+= gpio-max7301.o
+obj-$(CONFIG_GPIO_MAX730X)		+= gpio-max730x.o
+obj-$(CONFIG_GPIO_MAX732X)		+= gpio-max732x.o
+obj-$(CONFIG_GPIO_MAX77620)		+= gpio-max77620.o
+obj-$(CONFIG_GPIO_MAX77650)		+= gpio-max77650.o
+obj-$(CONFIG_GPIO_MB86S7X)		+= gpio-mb86s7x.o
+obj-$(CONFIG_GPIO_MC33880)		+= gpio-mc33880.o
+obj-$(CONFIG_GPIO_MC9S08DZ60)		+= gpio-mc9s08dz60.o
+obj-$(CONFIG_GPIO_MENZ127)		+= gpio-menz127.o
+obj-$(CONFIG_GPIO_MERRIFIELD)		+= gpio-merrifield.o
+obj-$(CONFIG_GPIO_ML_IOH)		+= gpio-ml-ioh.o
+obj-$(CONFIG_GPIO_MLXBF)		+= gpio-mlxbf.o
+obj-$(CONFIG_GPIO_MLXBF2)		+= gpio-mlxbf2.o
+obj-$(CONFIG_GPIO_MM_LANTIQ)		+= gpio-mm-lantiq.o
+obj-$(CONFIG_GPIO_MOCKUP)		+= gpio-mockup.o
+obj-$(CONFIG_GPIO_MOXTET)		+= gpio-moxtet.o
+obj-$(CONFIG_GPIO_MPC5200)		+= gpio-mpc5200.o
+obj-$(CONFIG_GPIO_MPC8XXX)		+= gpio-mpc8xxx.o
+obj-$(CONFIG_GPIO_MSIC)			+= gpio-msic.o
+obj-$(CONFIG_GPIO_MT7621)		+= gpio-mt7621.o
+obj-$(CONFIG_GPIO_MVEBU)		+= gpio-mvebu.o
+obj-$(CONFIG_GPIO_MXC)			+= gpio-mxc.o
+obj-$(CONFIG_GPIO_MXS)			+= gpio-mxs.o
+obj-$(CONFIG_GPIO_OCTEON)		+= gpio-octeon.o
+obj-$(CONFIG_GPIO_OMAP)			+= gpio-omap.o
+obj-$(CONFIG_GPIO_PALMAS)		+= gpio-palmas.o
+obj-$(CONFIG_GPIO_PCA953X)		+= gpio-pca953x.o
+obj-$(CONFIG_GPIO_PCA9570)		+= gpio-pca9570.o
+obj-$(CONFIG_GPIO_PCF857X)		+= gpio-pcf857x.o
+obj-$(CONFIG_GPIO_PCH)			+= gpio-pch.o
+obj-$(CONFIG_GPIO_PCIE_IDIO_24)		+= gpio-pcie-idio-24.o
+obj-$(CONFIG_GPIO_PCI_IDIO_16)		+= gpio-pci-idio-16.o
+obj-$(CONFIG_GPIO_PISOSR)		+= gpio-pisosr.o
+obj-$(CONFIG_GPIO_PL061)		+= gpio-pl061.o
+obj-$(CONFIG_GPIO_PMIC_EIC_SPRD)	+= gpio-pmic-eic-sprd.o
+obj-$(CONFIG_GPIO_PXA)			+= gpio-pxa.o
+obj-$(CONFIG_GPIO_RASPBERRYPI_EXP)	+= gpio-raspberrypi-exp.o
+obj-$(CONFIG_GPIO_RC5T583)		+= gpio-rc5t583.o
+obj-$(CONFIG_GPIO_RCAR)			+= gpio-rcar.o
+obj-$(CONFIG_GPIO_RDA)			+= gpio-rda.o
+obj-$(CONFIG_GPIO_RDC321X)		+= gpio-rdc321x.o
+obj-$(CONFIG_GPIO_REG)			+= gpio-reg.o
+obj-$(CONFIG_ARCH_SA1100)		+= gpio-sa1100.o
+obj-$(CONFIG_GPIO_SAMA5D2_PIOBU)	+= gpio-sama5d2-piobu.o
+obj-$(CONFIG_GPIO_SCH311X)		+= gpio-sch311x.o
+obj-$(CONFIG_GPIO_SCH)			+= gpio-sch.o
+obj-$(CONFIG_GPIO_SIFIVE)		+= gpio-sifive.o
+obj-$(CONFIG_GPIO_SIOX)			+= gpio-siox.o
+obj-$(CONFIG_GPIO_SL28CPLD)		+= gpio-sl28cpld.o
+obj-$(CONFIG_GPIO_SODAVILLE)		+= gpio-sodaville.o
+obj-$(CONFIG_GPIO_SPEAR_SPICS)		+= gpio-spear-spics.o
+obj-$(CONFIG_GPIO_SPRD)			+= gpio-sprd.o
+obj-$(CONFIG_GPIO_STA2X11)		+= gpio-sta2x11.o
+obj-$(CONFIG_GPIO_STMPE)		+= gpio-stmpe.o
+obj-$(CONFIG_GPIO_STP_XWAY)		+= gpio-stp-xway.o
+obj-$(CONFIG_GPIO_SYSCON)		+= gpio-syscon.o
+obj-$(CONFIG_GPIO_TB10X)		+= gpio-tb10x.o
+obj-$(CONFIG_GPIO_TC3589X)		+= gpio-tc3589x.o
+obj-$(CONFIG_GPIO_TEGRA186)		+= gpio-tegra186.o
+obj-$(CONFIG_GPIO_TEGRA)		+= gpio-tegra.o
+obj-$(CONFIG_GPIO_THUNDERX)		+= gpio-thunderx.o
+obj-$(CONFIG_GPIO_TIMBERDALE)		+= gpio-timberdale.o
+obj-$(CONFIG_GPIO_TPIC2810)		+= gpio-tpic2810.o
+obj-$(CONFIG_GPIO_TPS65086)		+= gpio-tps65086.o
+obj-$(CONFIG_GPIO_TPS65218)		+= gpio-tps65218.o
+obj-$(CONFIG_GPIO_TPS6586X)		+= gpio-tps6586x.o
+obj-$(CONFIG_GPIO_TPS65910)		+= gpio-tps65910.o
+obj-$(CONFIG_GPIO_TPS65912)		+= gpio-tps65912.o
+obj-$(CONFIG_GPIO_TPS68470)		+= gpio-tps68470.o
+obj-$(CONFIG_GPIO_TQMX86)		+= gpio-tqmx86.o
+obj-$(CONFIG_GPIO_TS4800)		+= gpio-ts4800.o
+obj-$(CONFIG_GPIO_TS4900)		+= gpio-ts4900.o
+obj-$(CONFIG_GPIO_TS5500)		+= gpio-ts5500.o
+obj-$(CONFIG_GPIO_TWL4030)		+= gpio-twl4030.o
+obj-$(CONFIG_GPIO_TWL6040)		+= gpio-twl6040.o
+obj-$(CONFIG_GPIO_UCB1400)		+= gpio-ucb1400.o
+obj-$(CONFIG_GPIO_UNIPHIER)		+= gpio-uniphier.o
+obj-$(CONFIG_GPIO_VF610)		+= gpio-vf610.o
+obj-$(CONFIG_GPIO_VIPERBOARD)		+= gpio-viperboard.o
+obj-$(CONFIG_GPIO_VR41XX)		+= gpio-vr41xx.o
+obj-$(CONFIG_GPIO_VX855)		+= gpio-vx855.o
+obj-$(CONFIG_GPIO_WCD934X)		+= gpio-wcd934x.o
+obj-$(CONFIG_GPIO_WHISKEY_COVE)		+= gpio-wcove.o
+obj-$(CONFIG_GPIO_WINBOND)		+= gpio-winbond.o
+obj-$(CONFIG_GPIO_WM831X)		+= gpio-wm831x.o
+obj-$(CONFIG_GPIO_WM8350)		+= gpio-wm8350.o
+obj-$(CONFIG_GPIO_WM8994)		+= gpio-wm8994.o
+obj-$(CONFIG_GPIO_WS16C48)		+= gpio-ws16c48.o
+obj-$(CONFIG_GPIO_XGENE)		+= gpio-xgene.o
+obj-$(CONFIG_GPIO_XGENE_SB)		+= gpio-xgene-sb.o
+obj-$(CONFIG_GPIO_XILINX)		+= gpio-xilinx.o
+obj-$(CONFIG_GPIO_XLP)			+= gpio-xlp.o
+obj-$(CONFIG_GPIO_XRA1403)		+= gpio-xra1403.o
+obj-$(CONFIG_GPIO_XTENSA)		+= gpio-xtensa.o
+obj-$(CONFIG_GPIO_ZEVIO)		+= gpio-zevio.o
+obj-$(CONFIG_GPIO_ZX)			+= gpio-zx.o
+obj-$(CONFIG_GPIO_ZYNQ)			+= gpio-zynq.o
diff --git a/drivers/gpio/TODO b/drivers/gpio/TODO
new file mode 100644
index 000000000..e560e45e8
--- /dev/null
+++ b/drivers/gpio/TODO
@@ -0,0 +1,193 @@
+This is a place for planning the ongoing long-term work in the GPIO
+subsystem.
+
+
+GPIO descriptors
+
+Starting with commit 79a9becda894 the GPIO subsystem embarked on a journey
+to move away from the global GPIO numberspace and toward a descriptor-based
+approach. This means that GPIO consumers, drivers and machine descriptions
+ideally have no use or idea of the global GPIO numberspace that has/was
+used in the inception of the GPIO subsystem.
+
+The numberspace issue is the same as to why irq is moving away from irq
+numbers to IRQ descriptors.
+
+The underlying motivation for this is that the GPIO numberspace has become
+unmanageable: machine board files tend to become full of macros trying to
+establish the numberspace at compile-time, making it hard to add any numbers
+in the middle (such as if you missed a pin on a chip) without the numberspace
+breaking.
+
+Machine descriptions such as device tree or ACPI does not have a concept of the
+Linux GPIO number as those descriptions are external to the Linux kernel
+and treat GPIO lines as abstract entities.
+
+The runtime-assigned GPIO numberspace (what you get if you assign the GPIO
+base as -1 in struct gpio_chip) has also became unpredictable due to factors
+such as probe ordering and the introduction of -EPROBE_DEFER making probe
+ordering of independent GPIO chips essentially unpredictable, as their base
+number will be assigned on a first come first serve basis.
+
+The best way to get out of the problem is to make the global GPIO numbers
+unimportant by simply not using them. GPIO descriptors deal with this.
+
+Work items:
+
+- Convert all GPIO device drivers to only #include <linux/gpio/driver.h>
+
+- Convert all consumer drivers to only #include <linux/gpio/consumer.h>
+
+- Convert all machine descriptors in "boardfiles" to only
+  #include <linux/gpio/machine.h>, the other option being to convert it
+  to a machine description such as device tree, ACPI or fwnode that
+  implicitly does not use global GPIO numbers.
+
+- When this work is complete (will require some of the items in the
+  following ongoing work as well) we can delete the old global
+  numberspace accessors from <linux/gpio.h> and eventually delete
+  <linux/gpio.h> altogether.
+
+
+Get rid of <linux/of_gpio.h>
+
+This header and helpers appeared at one point when there was no proper
+driver infrastructure for doing simpler MMIO GPIO devices and there was
+no core support for parsing device tree GPIOs from the core library with
+the [devm_]gpiod_get() calls we have today that will implicitly go into
+the device tree back-end. It is legacy and should not be used in new code.
+
+Work items:
+
+- Get rid of struct of_mm_gpio_chip altogether: use the generic  MMIO
+  GPIO for all current users (see below). Delete struct of_mm_gpio_chip,
+  to_of_mm_gpio_chip(), of_mm_gpiochip_add_data(), of_mm_gpiochip_add()
+  of_mm_gpiochip_remove() from the kernel.
+
+- Change all consumer drivers that #include <linux/of_gpio.h> to
+  #include <linux/gpio/consumer.h> and stop doing custom parsing of the
+  GPIO lines from the device tree. This can be tricky and often ivolves
+  changing boardfiles, etc.
+
+- Pull semantics for legacy device tree (OF) GPIO lookups into
+  gpiolib-of.c: in some cases subsystems are doing custom flags and
+  lookups for polarity inversion, open drain and what not. As we now
+  handle this with generic OF bindings, pull all legacy handling into
+  gpiolib so the library API becomes narrow and deep and handle all
+  legacy bindings internally. (See e.g. commits 6953c57ab172,
+  6a537d48461d etc)
+
+- Delete <linux/of_gpio.h> when all the above is complete and everything
+  uses <linux/gpio/consumer.h> or <linux/gpio/driver.h> instead.
+
+
+Get rid of <linux/gpio.h>
+
+This legacy header is a one stop shop for anything GPIO is closely tied
+to the global GPIO numberspace. The endgame of the above refactorings will
+be the removal of <linux/gpio.h> and from that point only the specialized
+headers under <linux/gpio/*.h> will be used. This requires all the above to
+be completed and is expected to take a long time.
+
+
+Collect drivers
+
+Collect GPIO drivers from arch/* and other places that should be placed
+in drivers/gpio/gpio-*. Augment platforms to create platform devices or
+similar and probe a proper driver in the gpiolib subsystem.
+
+In some cases it makes sense to create a GPIO chip from the local driver
+for a few GPIOs. Those should stay where they are.
+
+At the same time it makes sense to get rid of code duplication in existing or
+new coming drivers. For example, gpio-ml-ioh should be incorporated into
+gpio-pch. In similar way gpio-intel-mid into gpio-pxa.
+
+
+Generic MMIO GPIO
+
+The GPIO drivers can utilize the generic MMIO helper library in many
+cases, and the helper library should be as helpful as possible for MMIO
+drivers. (drivers/gpio/gpio-mmio.c)
+
+Work items:
+
+- Look over and identify any remaining easily converted drivers and
+  dry-code conversions to MMIO GPIO for maintainers to test
+
+- Expand the MMIO GPIO or write a new library for regmap-based I/O
+  helpers for GPIO drivers on regmap that simply use offsets
+  0..n in some register to drive GPIO lines
+
+- Expand the MMIO GPIO or write a new library for port-mapped I/O
+  helpers (x86 inb()/outb()) and convert port-mapped I/O drivers to use
+  this with dry-coding and sending to maintainers to test
+
+
+GPIOLIB irqchip
+
+The GPIOLIB irqchip is a helper irqchip for "simple cases" that should
+try to cover any generic kind of irqchip cascaded from a GPIO.
+
+- Convert all the GPIOLIB_IRQCHIP users to pass an irqchip template,
+  parent and flags before calling [devm_]gpiochip_add[_data]().
+  Currently we set up the irqchip after setting up the gpiochip
+  using gpiochip_irqchip_add() and gpiochip_set_[chained|nested]_irqchip().
+  This is too complex, so convert all users over to just set up
+  the irqchip before registering the gpio_chip, typical example:
+
+  /* Typical state container with dynamic irqchip */
+  struct my_gpio {
+      struct gpio_chip gc;
+      struct irq_chip irq;
+  };
+
+  int irq; /* from platform etc */
+  struct my_gpio *g;
+  struct gpio_irq_chip *girq;
+
+  /* Set up the irqchip dynamically */
+  g->irq.name = "my_gpio_irq";
+  g->irq.irq_ack = my_gpio_ack_irq;
+  g->irq.irq_mask = my_gpio_mask_irq;
+  g->irq.irq_unmask = my_gpio_unmask_irq;
+  g->irq.irq_set_type = my_gpio_set_irq_type;
+
+  /* Get a pointer to the gpio_irq_chip */
+  girq = &g->gc.irq;
+  girq->chip = &g->irq;
+  girq->parent_handler = ftgpio_gpio_irq_handler;
+  girq->num_parents = 1;
+  girq->parents = devm_kcalloc(dev, 1, sizeof(*girq->parents),
+                               GFP_KERNEL);
+  if (!girq->parents)
+      return -ENOMEM;
+  girq->default_type = IRQ_TYPE_NONE;
+  girq->handler = handle_bad_irq;
+  girq->parents[0] = irq;
+
+  When this is done, we will delete the old APIs for instatiating
+  GPIOLIB_IRQCHIP and simplify the code.
+
+- Look over and identify any remaining easily converted drivers and
+  dry-code conversions to gpiolib irqchip for maintainers to test
+
+- Drop gpiochip_set_chained_irqchip() when all the chained irqchips
+  have been converted to the above infrastructure.
+
+- Add more infrastructure to make it possible to also pass a threaded
+  irqchip in struct gpio_irq_chip.
+
+- Drop gpiochip_irqchip_add_nested() when all the chained irqchips
+  have been converted to the above infrastructure.
+
+
+Increase integration with pin control
+
+There are already ways to use pin control as back-end for GPIO and
+it may make sense to bring these subsystems closer. One reason for
+creating pin control as its own subsystem was that we could avoid any
+use of the global GPIO numbers. Once the above is complete, it may
+make sense to simply join the subsystems into one and make pin
+multiplexing, pin configuration, GPIO, etc selectable options in one
+and the same pin control and GPIO subsystem.
diff --git a/drivers/gpio/gpio-104-dio-48e.c b/drivers/gpio/gpio-104-dio-48e.c
new file mode 100644
index 000000000..7a9021c4f
--- /dev/null
+++ b/drivers/gpio/gpio-104-dio-48e.c
@@ -0,0 +1,463 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * GPIO driver for the ACCES 104-DIO-48E series
+ * Copyright (C) 2016 William Breathitt Gray
+ *
+ * This driver supports the following ACCES devices: 104-DIO-48E and
+ * 104-DIO-24E.
+ */
+#include <linux/bitmap.h>
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/gpio/driver.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/irqdesc.h>
+#include <linux/isa.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/spinlock.h>
+
+#define DIO48E_EXTENT 16
+#define MAX_NUM_DIO48E max_num_isa_dev(DIO48E_EXTENT)
+
+static unsigned int base[MAX_NUM_DIO48E];
+static unsigned int num_dio48e;
+module_param_hw_array(base, uint, ioport, &num_dio48e, 0);
+MODULE_PARM_DESC(base, "ACCES 104-DIO-48E base addresses");
+
+static unsigned int irq[MAX_NUM_DIO48E];
+module_param_hw_array(irq, uint, irq, NULL, 0);
+MODULE_PARM_DESC(irq, "ACCES 104-DIO-48E interrupt line numbers");
+
+/**
+ * struct dio48e_gpio - GPIO device private data structure
+ * @chip:	instance of the gpio_chip
+ * @io_state:	bit I/O state (whether bit is set to input or output)
+ * @out_state:	output bits state
+ * @control:	Control registers state
+ * @lock:	synchronization lock to prevent I/O race conditions
+ * @base:	base port address of the GPIO device
+ * @irq_mask:	I/O bits affected by interrupts
+ */
+struct dio48e_gpio {
+	struct gpio_chip chip;
+	unsigned char io_state[6];
+	unsigned char out_state[6];
+	unsigned char control[2];
+	raw_spinlock_t lock;
+	unsigned base;
+	unsigned char irq_mask;
+};
+
+static int dio48e_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
+{
+	struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip);
+	const unsigned port = offset / 8;
+	const unsigned mask = BIT(offset % 8);
+
+	if (dio48egpio->io_state[port] & mask)
+		return  GPIO_LINE_DIRECTION_IN;
+
+	return GPIO_LINE_DIRECTION_OUT;
+}
+
+static int dio48e_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip);
+	const unsigned io_port = offset / 8;
+	const unsigned int control_port = io_port / 3;
+	const unsigned control_addr = dio48egpio->base + 3 + control_port*4;
+	unsigned long flags;
+	unsigned control;
+
+	raw_spin_lock_irqsave(&dio48egpio->lock, flags);
+
+	/* Check if configuring Port C */
+	if (io_port == 2 || io_port == 5) {
+		/* Port C can be configured by nibble */
+		if (offset % 8 > 3) {
+			dio48egpio->io_state[io_port] |= 0xF0;
+			dio48egpio->control[control_port] |= BIT(3);
+		} else {
+			dio48egpio->io_state[io_port] |= 0x0F;
+			dio48egpio->control[control_port] |= BIT(0);
+		}
+	} else {
+		dio48egpio->io_state[io_port] |= 0xFF;
+		if (io_port == 0 || io_port == 3)
+			dio48egpio->control[control_port] |= BIT(4);
+		else
+			dio48egpio->control[control_port] |= BIT(1);
+	}
+
+	control = BIT(7) | dio48egpio->control[control_port];
+	outb(control, control_addr);
+	control &= ~BIT(7);
+	outb(control, control_addr);
+
+	raw_spin_unlock_irqrestore(&dio48egpio->lock, flags);
+
+	return 0;
+}
+
+static int dio48e_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
+	int value)
+{
+	struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip);
+	const unsigned io_port = offset / 8;
+	const unsigned int control_port = io_port / 3;
+	const unsigned mask = BIT(offset % 8);
+	const unsigned control_addr = dio48egpio->base + 3 + control_port*4;
+	const unsigned out_port = (io_port > 2) ? io_port + 1 : io_port;
+	unsigned long flags;
+	unsigned control;
+
+	raw_spin_lock_irqsave(&dio48egpio->lock, flags);
+
+	/* Check if configuring Port C */
+	if (io_port == 2 || io_port == 5) {
+		/* Port C can be configured by nibble */
+		if (offset % 8 > 3) {
+			dio48egpio->io_state[io_port] &= 0x0F;
+			dio48egpio->control[control_port] &= ~BIT(3);
+		} else {
+			dio48egpio->io_state[io_port] &= 0xF0;
+			dio48egpio->control[control_port] &= ~BIT(0);
+		}
+	} else {
+		dio48egpio->io_state[io_port] &= 0x00;
+		if (io_port == 0 || io_port == 3)
+			dio48egpio->control[control_port] &= ~BIT(4);
+		else
+			dio48egpio->control[control_port] &= ~BIT(1);
+	}
+
+	if (value)
+		dio48egpio->out_state[io_port] |= mask;
+	else
+		dio48egpio->out_state[io_port] &= ~mask;
+
+	control = BIT(7) | dio48egpio->control[control_port];
+	outb(control, control_addr);
+
+	outb(dio48egpio->out_state[io_port], dio48egpio->base + out_port);
+
+	control &= ~BIT(7);
+	outb(control, control_addr);
+
+	raw_spin_unlock_irqrestore(&dio48egpio->lock, flags);
+
+	return 0;
+}
+
+static int dio48e_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip);
+	const unsigned port = offset / 8;
+	const unsigned mask = BIT(offset % 8);
+	const unsigned in_port = (port > 2) ? port + 1 : port;
+	unsigned long flags;
+	unsigned port_state;
+
+	raw_spin_lock_irqsave(&dio48egpio->lock, flags);
+
+	/* ensure that GPIO is set for input */
+	if (!(dio48egpio->io_state[port] & mask)) {
+		raw_spin_unlock_irqrestore(&dio48egpio->lock, flags);
+		return -EINVAL;
+	}
+
+	port_state = inb(dio48egpio->base + in_port);
+
+	raw_spin_unlock_irqrestore(&dio48egpio->lock, flags);
+
+	return !!(port_state & mask);
+}
+
+static const size_t ports[] = { 0, 1, 2, 4, 5, 6 };
+
+static int dio48e_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask,
+	unsigned long *bits)
+{
+	struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip);
+	unsigned long offset;
+	unsigned long gpio_mask;
+	unsigned int port_addr;
+	unsigned long port_state;
+
+	/* clear bits array to a clean slate */
+	bitmap_zero(bits, chip->ngpio);
+
+	for_each_set_clump8(offset, gpio_mask, mask, ARRAY_SIZE(ports) * 8) {
+		port_addr = dio48egpio->base + ports[offset / 8];
+		port_state = inb(port_addr) & gpio_mask;
+
+		bitmap_set_value8(bits, port_state, offset);
+	}
+
+	return 0;
+}
+
+static void dio48e_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip);
+	const unsigned port = offset / 8;
+	const unsigned mask = BIT(offset % 8);
+	const unsigned out_port = (port > 2) ? port + 1 : port;
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&dio48egpio->lock, flags);
+
+	if (value)
+		dio48egpio->out_state[port] |= mask;
+	else
+		dio48egpio->out_state[port] &= ~mask;
+
+	outb(dio48egpio->out_state[port], dio48egpio->base + out_port);
+
+	raw_spin_unlock_irqrestore(&dio48egpio->lock, flags);
+}
+
+static void dio48e_gpio_set_multiple(struct gpio_chip *chip,
+	unsigned long *mask, unsigned long *bits)
+{
+	struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip);
+	unsigned long offset;
+	unsigned long gpio_mask;
+	size_t index;
+	unsigned int port_addr;
+	unsigned long bitmask;
+	unsigned long flags;
+
+	for_each_set_clump8(offset, gpio_mask, mask, ARRAY_SIZE(ports) * 8) {
+		index = offset / 8;
+		port_addr = dio48egpio->base + ports[index];
+
+		bitmask = bitmap_get_value8(bits, offset) & gpio_mask;
+
+		raw_spin_lock_irqsave(&dio48egpio->lock, flags);
+
+		/* update output state data and set device gpio register */
+		dio48egpio->out_state[index] &= ~gpio_mask;
+		dio48egpio->out_state[index] |= bitmask;
+		outb(dio48egpio->out_state[index], port_addr);
+
+		raw_spin_unlock_irqrestore(&dio48egpio->lock, flags);
+	}
+}
+
+static void dio48e_irq_ack(struct irq_data *data)
+{
+}
+
+static void dio48e_irq_mask(struct irq_data *data)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+	struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip);
+	const unsigned long offset = irqd_to_hwirq(data);
+	unsigned long flags;
+
+	/* only bit 3 on each respective Port C supports interrupts */
+	if (offset != 19 && offset != 43)
+		return;
+
+	raw_spin_lock_irqsave(&dio48egpio->lock, flags);
+
+	if (offset == 19)
+		dio48egpio->irq_mask &= ~BIT(0);
+	else
+		dio48egpio->irq_mask &= ~BIT(1);
+
+	if (!dio48egpio->irq_mask)
+		/* disable interrupts */
+		inb(dio48egpio->base + 0xB);
+
+	raw_spin_unlock_irqrestore(&dio48egpio->lock, flags);
+}
+
+static void dio48e_irq_unmask(struct irq_data *data)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+	struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip);
+	const unsigned long offset = irqd_to_hwirq(data);
+	unsigned long flags;
+
+	/* only bit 3 on each respective Port C supports interrupts */
+	if (offset != 19 && offset != 43)
+		return;
+
+	raw_spin_lock_irqsave(&dio48egpio->lock, flags);
+
+	if (!dio48egpio->irq_mask) {
+		/* enable interrupts */
+		outb(0x00, dio48egpio->base + 0xF);
+		outb(0x00, dio48egpio->base + 0xB);
+	}
+
+	if (offset == 19)
+		dio48egpio->irq_mask |= BIT(0);
+	else
+		dio48egpio->irq_mask |= BIT(1);
+
+	raw_spin_unlock_irqrestore(&dio48egpio->lock, flags);
+}
+
+static int dio48e_irq_set_type(struct irq_data *data, unsigned flow_type)
+{
+	const unsigned long offset = irqd_to_hwirq(data);
+
+	/* only bit 3 on each respective Port C supports interrupts */
+	if (offset != 19 && offset != 43)
+		return -EINVAL;
+
+	if (flow_type != IRQ_TYPE_NONE && flow_type != IRQ_TYPE_EDGE_RISING)
+		return -EINVAL;
+
+	return 0;
+}
+
+static struct irq_chip dio48e_irqchip = {
+	.name = "104-dio-48e",
+	.irq_ack = dio48e_irq_ack,
+	.irq_mask = dio48e_irq_mask,
+	.irq_unmask = dio48e_irq_unmask,
+	.irq_set_type = dio48e_irq_set_type
+};
+
+static irqreturn_t dio48e_irq_handler(int irq, void *dev_id)
+{
+	struct dio48e_gpio *const dio48egpio = dev_id;
+	struct gpio_chip *const chip = &dio48egpio->chip;
+	const unsigned long irq_mask = dio48egpio->irq_mask;
+	unsigned long gpio;
+
+	for_each_set_bit(gpio, &irq_mask, 2)
+		generic_handle_irq(irq_find_mapping(chip->irq.domain,
+			19 + gpio*24));
+
+	raw_spin_lock(&dio48egpio->lock);
+
+	outb(0x00, dio48egpio->base + 0xF);
+
+	raw_spin_unlock(&dio48egpio->lock);
+
+	return IRQ_HANDLED;
+}
+
+#define DIO48E_NGPIO 48
+static const char *dio48e_names[DIO48E_NGPIO] = {
+	"PPI Group 0 Port A 0", "PPI Group 0 Port A 1", "PPI Group 0 Port A 2",
+	"PPI Group 0 Port A 3", "PPI Group 0 Port A 4", "PPI Group 0 Port A 5",
+	"PPI Group 0 Port A 6", "PPI Group 0 Port A 7",	"PPI Group 0 Port B 0",
+	"PPI Group 0 Port B 1", "PPI Group 0 Port B 2", "PPI Group 0 Port B 3",
+	"PPI Group 0 Port B 4", "PPI Group 0 Port B 5", "PPI Group 0 Port B 6",
+	"PPI Group 0 Port B 7", "PPI Group 0 Port C 0", "PPI Group 0 Port C 1",
+	"PPI Group 0 Port C 2", "PPI Group 0 Port C 3", "PPI Group 0 Port C 4",
+	"PPI Group 0 Port C 5", "PPI Group 0 Port C 6", "PPI Group 0 Port C 7",
+	"PPI Group 1 Port A 0", "PPI Group 1 Port A 1", "PPI Group 1 Port A 2",
+	"PPI Group 1 Port A 3", "PPI Group 1 Port A 4", "PPI Group 1 Port A 5",
+	"PPI Group 1 Port A 6", "PPI Group 1 Port A 7",	"PPI Group 1 Port B 0",
+	"PPI Group 1 Port B 1", "PPI Group 1 Port B 2", "PPI Group 1 Port B 3",
+	"PPI Group 1 Port B 4", "PPI Group 1 Port B 5", "PPI Group 1 Port B 6",
+	"PPI Group 1 Port B 7", "PPI Group 1 Port C 0", "PPI Group 1 Port C 1",
+	"PPI Group 1 Port C 2", "PPI Group 1 Port C 3", "PPI Group 1 Port C 4",
+	"PPI Group 1 Port C 5", "PPI Group 1 Port C 6", "PPI Group 1 Port C 7"
+};
+
+static int dio48e_irq_init_hw(struct gpio_chip *gc)
+{
+	struct dio48e_gpio *const dio48egpio = gpiochip_get_data(gc);
+
+	/* Disable IRQ by default */
+	inb(dio48egpio->base + 0xB);
+
+	return 0;
+}
+
+static int dio48e_probe(struct device *dev, unsigned int id)
+{
+	struct dio48e_gpio *dio48egpio;
+	const char *const name = dev_name(dev);
+	struct gpio_irq_chip *girq;
+	int err;
+
+	dio48egpio = devm_kzalloc(dev, sizeof(*dio48egpio), GFP_KERNEL);
+	if (!dio48egpio)
+		return -ENOMEM;
+
+	if (!devm_request_region(dev, base[id], DIO48E_EXTENT, name)) {
+		dev_err(dev, "Unable to lock port addresses (0x%X-0x%X)\n",
+			base[id], base[id] + DIO48E_EXTENT);
+		return -EBUSY;
+	}
+
+	dio48egpio->chip.label = name;
+	dio48egpio->chip.parent = dev;
+	dio48egpio->chip.owner = THIS_MODULE;
+	dio48egpio->chip.base = -1;
+	dio48egpio->chip.ngpio = DIO48E_NGPIO;
+	dio48egpio->chip.names = dio48e_names;
+	dio48egpio->chip.get_direction = dio48e_gpio_get_direction;
+	dio48egpio->chip.direction_input = dio48e_gpio_direction_input;
+	dio48egpio->chip.direction_output = dio48e_gpio_direction_output;
+	dio48egpio->chip.get = dio48e_gpio_get;
+	dio48egpio->chip.get_multiple = dio48e_gpio_get_multiple;
+	dio48egpio->chip.set = dio48e_gpio_set;
+	dio48egpio->chip.set_multiple = dio48e_gpio_set_multiple;
+	dio48egpio->base = base[id];
+
+	girq = &dio48egpio->chip.irq;
+	girq->chip = &dio48e_irqchip;
+	/* This will let us handle the parent IRQ in the driver */
+	girq->parent_handler = NULL;
+	girq->num_parents = 0;
+	girq->parents = NULL;
+	girq->default_type = IRQ_TYPE_NONE;
+	girq->handler = handle_edge_irq;
+	girq->init_hw = dio48e_irq_init_hw;
+
+	raw_spin_lock_init(&dio48egpio->lock);
+
+	/* initialize all GPIO as output */
+	outb(0x80, base[id] + 3);
+	outb(0x00, base[id]);
+	outb(0x00, base[id] + 1);
+	outb(0x00, base[id] + 2);
+	outb(0x00, base[id] + 3);
+	outb(0x80, base[id] + 7);
+	outb(0x00, base[id] + 4);
+	outb(0x00, base[id] + 5);
+	outb(0x00, base[id] + 6);
+	outb(0x00, base[id] + 7);
+
+	err = devm_gpiochip_add_data(dev, &dio48egpio->chip, dio48egpio);
+	if (err) {
+		dev_err(dev, "GPIO registering failed (%d)\n", err);
+		return err;
+	}
+
+	err = devm_request_irq(dev, irq[id], dio48e_irq_handler, 0, name,
+		dio48egpio);
+	if (err) {
+		dev_err(dev, "IRQ handler registering failed (%d)\n", err);
+		return err;
+	}
+
+	return 0;
+}
+
+static struct isa_driver dio48e_driver = {
+	.probe = dio48e_probe,
+	.driver = {
+		.name = "104-dio-48e"
+	},
+};
+module_isa_driver(dio48e_driver, num_dio48e);
+
+MODULE_AUTHOR("William Breathitt Gray <vilhelm.gray@gmail.com>");
+MODULE_DESCRIPTION("ACCES 104-DIO-48E GPIO driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-104-idi-48.c b/drivers/gpio/gpio-104-idi-48.c
new file mode 100644
index 000000000..94c3a9bc4
--- /dev/null
+++ b/drivers/gpio/gpio-104-idi-48.c
@@ -0,0 +1,329 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * GPIO driver for the ACCES 104-IDI-48 family
+ * Copyright (C) 2015 William Breathitt Gray
+ *
+ * This driver supports the following ACCES devices: 104-IDI-48A,
+ * 104-IDI-48AC, 104-IDI-48B, and 104-IDI-48BC.
+ */
+#include <linux/bitmap.h>
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/gpio/driver.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/irqdesc.h>
+#include <linux/isa.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/spinlock.h>
+
+#define IDI_48_EXTENT 8
+#define MAX_NUM_IDI_48 max_num_isa_dev(IDI_48_EXTENT)
+
+static unsigned int base[MAX_NUM_IDI_48];
+static unsigned int num_idi_48;
+module_param_hw_array(base, uint, ioport, &num_idi_48, 0);
+MODULE_PARM_DESC(base, "ACCES 104-IDI-48 base addresses");
+
+static unsigned int irq[MAX_NUM_IDI_48];
+module_param_hw_array(irq, uint, irq, NULL, 0);
+MODULE_PARM_DESC(irq, "ACCES 104-IDI-48 interrupt line numbers");
+
+/**
+ * struct idi_48_gpio - GPIO device private data structure
+ * @chip:	instance of the gpio_chip
+ * @lock:	synchronization lock to prevent I/O race conditions
+ * @ack_lock:	synchronization lock to prevent IRQ handler race conditions
+ * @irq_mask:	input bits affected by interrupts
+ * @base:	base port address of the GPIO device
+ * @cos_enb:	Change-Of-State IRQ enable boundaries mask
+ */
+struct idi_48_gpio {
+	struct gpio_chip chip;
+	raw_spinlock_t lock;
+	spinlock_t ack_lock;
+	unsigned char irq_mask[6];
+	unsigned base;
+	unsigned char cos_enb;
+};
+
+static int idi_48_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
+{
+	return GPIO_LINE_DIRECTION_IN;
+}
+
+static int idi_48_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	return 0;
+}
+
+static int idi_48_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct idi_48_gpio *const idi48gpio = gpiochip_get_data(chip);
+	unsigned i;
+	static const unsigned int register_offset[6] = { 0, 1, 2, 4, 5, 6 };
+	unsigned base_offset;
+	unsigned mask;
+
+	for (i = 0; i < 48; i += 8)
+		if (offset < i + 8) {
+			base_offset = register_offset[i / 8];
+			mask = BIT(offset - i);
+
+			return !!(inb(idi48gpio->base + base_offset) & mask);
+		}
+
+	/* The following line should never execute since offset < 48 */
+	return 0;
+}
+
+static int idi_48_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask,
+	unsigned long *bits)
+{
+	struct idi_48_gpio *const idi48gpio = gpiochip_get_data(chip);
+	unsigned long offset;
+	unsigned long gpio_mask;
+	static const size_t ports[] = { 0, 1, 2, 4, 5, 6 };
+	unsigned int port_addr;
+	unsigned long port_state;
+
+	/* clear bits array to a clean slate */
+	bitmap_zero(bits, chip->ngpio);
+
+	for_each_set_clump8(offset, gpio_mask, mask, ARRAY_SIZE(ports) * 8) {
+		port_addr = idi48gpio->base + ports[offset / 8];
+		port_state = inb(port_addr) & gpio_mask;
+
+		bitmap_set_value8(bits, port_state, offset);
+	}
+
+	return 0;
+}
+
+static void idi_48_irq_ack(struct irq_data *data)
+{
+}
+
+static void idi_48_irq_mask(struct irq_data *data)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+	struct idi_48_gpio *const idi48gpio = gpiochip_get_data(chip);
+	const unsigned offset = irqd_to_hwirq(data);
+	unsigned i;
+	unsigned mask;
+	unsigned boundary;
+	unsigned long flags;
+
+	for (i = 0; i < 48; i += 8)
+		if (offset < i + 8) {
+			mask = BIT(offset - i);
+			boundary = i / 8;
+
+			idi48gpio->irq_mask[boundary] &= ~mask;
+
+			if (!idi48gpio->irq_mask[boundary]) {
+				idi48gpio->cos_enb &= ~BIT(boundary);
+
+				raw_spin_lock_irqsave(&idi48gpio->lock, flags);
+
+				outb(idi48gpio->cos_enb, idi48gpio->base + 7);
+
+				raw_spin_unlock_irqrestore(&idi48gpio->lock,
+						           flags);
+			}
+
+			return;
+		}
+}
+
+static void idi_48_irq_unmask(struct irq_data *data)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+	struct idi_48_gpio *const idi48gpio = gpiochip_get_data(chip);
+	const unsigned offset = irqd_to_hwirq(data);
+	unsigned i;
+	unsigned mask;
+	unsigned boundary;
+	unsigned prev_irq_mask;
+	unsigned long flags;
+
+	for (i = 0; i < 48; i += 8)
+		if (offset < i + 8) {
+			mask = BIT(offset - i);
+			boundary = i / 8;
+			prev_irq_mask = idi48gpio->irq_mask[boundary];
+
+			idi48gpio->irq_mask[boundary] |= mask;
+
+			if (!prev_irq_mask) {
+				idi48gpio->cos_enb |= BIT(boundary);
+
+				raw_spin_lock_irqsave(&idi48gpio->lock, flags);
+
+				outb(idi48gpio->cos_enb, idi48gpio->base + 7);
+
+				raw_spin_unlock_irqrestore(&idi48gpio->lock,
+						           flags);
+			}
+
+			return;
+		}
+}
+
+static int idi_48_irq_set_type(struct irq_data *data, unsigned flow_type)
+{
+	/* The only valid irq types are none and both-edges */
+	if (flow_type != IRQ_TYPE_NONE &&
+		(flow_type & IRQ_TYPE_EDGE_BOTH) != IRQ_TYPE_EDGE_BOTH)
+		return -EINVAL;
+
+	return 0;
+}
+
+static struct irq_chip idi_48_irqchip = {
+	.name = "104-idi-48",
+	.irq_ack = idi_48_irq_ack,
+	.irq_mask = idi_48_irq_mask,
+	.irq_unmask = idi_48_irq_unmask,
+	.irq_set_type = idi_48_irq_set_type
+};
+
+static irqreturn_t idi_48_irq_handler(int irq, void *dev_id)
+{
+	struct idi_48_gpio *const idi48gpio = dev_id;
+	unsigned long cos_status;
+	unsigned long boundary;
+	unsigned long irq_mask;
+	unsigned long bit_num;
+	unsigned long gpio;
+	struct gpio_chip *const chip = &idi48gpio->chip;
+
+	spin_lock(&idi48gpio->ack_lock);
+
+	raw_spin_lock(&idi48gpio->lock);
+
+	cos_status = inb(idi48gpio->base + 7);
+
+	raw_spin_unlock(&idi48gpio->lock);
+
+	/* IRQ Status (bit 6) is active low (0 = IRQ generated by device) */
+	if (cos_status & BIT(6)) {
+		spin_unlock(&idi48gpio->ack_lock);
+		return IRQ_NONE;
+	}
+
+	/* Bit 0-5 indicate which Change-Of-State boundary triggered the IRQ */
+	cos_status &= 0x3F;
+
+	for_each_set_bit(boundary, &cos_status, 6) {
+		irq_mask = idi48gpio->irq_mask[boundary];
+
+		for_each_set_bit(bit_num, &irq_mask, 8) {
+			gpio = bit_num + boundary * 8;
+
+			generic_handle_irq(irq_find_mapping(chip->irq.domain,
+				gpio));
+		}
+	}
+
+	spin_unlock(&idi48gpio->ack_lock);
+
+	return IRQ_HANDLED;
+}
+
+#define IDI48_NGPIO 48
+static const char *idi48_names[IDI48_NGPIO] = {
+	"Bit 0 A", "Bit 1 A", "Bit 2 A", "Bit 3 A", "Bit 4 A", "Bit 5 A",
+	"Bit 6 A", "Bit 7 A", "Bit 8 A", "Bit 9 A", "Bit 10 A", "Bit 11 A",
+	"Bit 12 A", "Bit 13 A", "Bit 14 A", "Bit 15 A",	"Bit 16 A", "Bit 17 A",
+	"Bit 18 A", "Bit 19 A", "Bit 20 A", "Bit 21 A", "Bit 22 A", "Bit 23 A",
+	"Bit 0 B", "Bit 1 B", "Bit 2 B", "Bit 3 B", "Bit 4 B", "Bit 5 B",
+	"Bit 6 B", "Bit 7 B", "Bit 8 B", "Bit 9 B", "Bit 10 B", "Bit 11 B",
+	"Bit 12 B", "Bit 13 B", "Bit 14 B", "Bit 15 B",	"Bit 16 B", "Bit 17 B",
+	"Bit 18 B", "Bit 19 B", "Bit 20 B", "Bit 21 B", "Bit 22 B", "Bit 23 B"
+};
+
+static int idi_48_irq_init_hw(struct gpio_chip *gc)
+{
+	struct idi_48_gpio *const idi48gpio = gpiochip_get_data(gc);
+
+	/* Disable IRQ by default */
+	outb(0, idi48gpio->base + 7);
+	inb(idi48gpio->base + 7);
+
+	return 0;
+}
+
+static int idi_48_probe(struct device *dev, unsigned int id)
+{
+	struct idi_48_gpio *idi48gpio;
+	const char *const name = dev_name(dev);
+	struct gpio_irq_chip *girq;
+	int err;
+
+	idi48gpio = devm_kzalloc(dev, sizeof(*idi48gpio), GFP_KERNEL);
+	if (!idi48gpio)
+		return -ENOMEM;
+
+	if (!devm_request_region(dev, base[id], IDI_48_EXTENT, name)) {
+		dev_err(dev, "Unable to lock port addresses (0x%X-0x%X)\n",
+			base[id], base[id] + IDI_48_EXTENT);
+		return -EBUSY;
+	}
+
+	idi48gpio->chip.label = name;
+	idi48gpio->chip.parent = dev;
+	idi48gpio->chip.owner = THIS_MODULE;
+	idi48gpio->chip.base = -1;
+	idi48gpio->chip.ngpio = IDI48_NGPIO;
+	idi48gpio->chip.names = idi48_names;
+	idi48gpio->chip.get_direction = idi_48_gpio_get_direction;
+	idi48gpio->chip.direction_input = idi_48_gpio_direction_input;
+	idi48gpio->chip.get = idi_48_gpio_get;
+	idi48gpio->chip.get_multiple = idi_48_gpio_get_multiple;
+	idi48gpio->base = base[id];
+
+	girq = &idi48gpio->chip.irq;
+	girq->chip = &idi_48_irqchip;
+	/* This will let us handle the parent IRQ in the driver */
+	girq->parent_handler = NULL;
+	girq->num_parents = 0;
+	girq->parents = NULL;
+	girq->default_type = IRQ_TYPE_NONE;
+	girq->handler = handle_edge_irq;
+	girq->init_hw = idi_48_irq_init_hw;
+
+	raw_spin_lock_init(&idi48gpio->lock);
+	spin_lock_init(&idi48gpio->ack_lock);
+
+	err = devm_gpiochip_add_data(dev, &idi48gpio->chip, idi48gpio);
+	if (err) {
+		dev_err(dev, "GPIO registering failed (%d)\n", err);
+		return err;
+	}
+
+	err = devm_request_irq(dev, irq[id], idi_48_irq_handler, IRQF_SHARED,
+		name, idi48gpio);
+	if (err) {
+		dev_err(dev, "IRQ handler registering failed (%d)\n", err);
+		return err;
+	}
+
+	return 0;
+}
+
+static struct isa_driver idi_48_driver = {
+	.probe = idi_48_probe,
+	.driver = {
+		.name = "104-idi-48"
+	},
+};
+module_isa_driver(idi_48_driver, num_idi_48);
+
+MODULE_AUTHOR("William Breathitt Gray <vilhelm.gray@gmail.com>");
+MODULE_DESCRIPTION("ACCES 104-IDI-48 GPIO driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-104-idio-16.c b/drivers/gpio/gpio-104-idio-16.c
new file mode 100644
index 000000000..50ad0280f
--- /dev/null
+++ b/drivers/gpio/gpio-104-idio-16.c
@@ -0,0 +1,310 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * GPIO driver for the ACCES 104-IDIO-16 family
+ * Copyright (C) 2015 William Breathitt Gray
+ *
+ * This driver supports the following ACCES devices: 104-IDIO-16,
+ * 104-IDIO-16E, 104-IDO-16, 104-IDIO-8, 104-IDIO-8E, and 104-IDO-8.
+ */
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/gpio/driver.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/irqdesc.h>
+#include <linux/isa.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/spinlock.h>
+
+#define IDIO_16_EXTENT 8
+#define MAX_NUM_IDIO_16 max_num_isa_dev(IDIO_16_EXTENT)
+
+static unsigned int base[MAX_NUM_IDIO_16];
+static unsigned int num_idio_16;
+module_param_hw_array(base, uint, ioport, &num_idio_16, 0);
+MODULE_PARM_DESC(base, "ACCES 104-IDIO-16 base addresses");
+
+static unsigned int irq[MAX_NUM_IDIO_16];
+module_param_hw_array(irq, uint, irq, NULL, 0);
+MODULE_PARM_DESC(irq, "ACCES 104-IDIO-16 interrupt line numbers");
+
+/**
+ * struct idio_16_gpio - GPIO device private data structure
+ * @chip:	instance of the gpio_chip
+ * @lock:	synchronization lock to prevent I/O race conditions
+ * @irq_mask:	I/O bits affected by interrupts
+ * @base:	base port address of the GPIO device
+ * @out_state:	output bits state
+ */
+struct idio_16_gpio {
+	struct gpio_chip chip;
+	raw_spinlock_t lock;
+	unsigned long irq_mask;
+	unsigned base;
+	unsigned out_state;
+};
+
+static int idio_16_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
+{
+	if (offset > 15)
+		return GPIO_LINE_DIRECTION_IN;
+
+	return GPIO_LINE_DIRECTION_OUT;
+}
+
+static int idio_16_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	return 0;
+}
+
+static int idio_16_gpio_direction_output(struct gpio_chip *chip,
+	unsigned offset, int value)
+{
+	chip->set(chip, offset, value);
+	return 0;
+}
+
+static int idio_16_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct idio_16_gpio *const idio16gpio = gpiochip_get_data(chip);
+	const unsigned mask = BIT(offset-16);
+
+	if (offset < 16)
+		return -EINVAL;
+
+	if (offset < 24)
+		return !!(inb(idio16gpio->base + 1) & mask);
+
+	return !!(inb(idio16gpio->base + 5) & (mask>>8));
+}
+
+static int idio_16_gpio_get_multiple(struct gpio_chip *chip,
+	unsigned long *mask, unsigned long *bits)
+{
+	struct idio_16_gpio *const idio16gpio = gpiochip_get_data(chip);
+
+	*bits = 0;
+	if (*mask & GENMASK(23, 16))
+		*bits |= (unsigned long)inb(idio16gpio->base + 1) << 16;
+	if (*mask & GENMASK(31, 24))
+		*bits |= (unsigned long)inb(idio16gpio->base + 5) << 24;
+
+	return 0;
+}
+
+static void idio_16_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct idio_16_gpio *const idio16gpio = gpiochip_get_data(chip);
+	const unsigned mask = BIT(offset);
+	unsigned long flags;
+
+	if (offset > 15)
+		return;
+
+	raw_spin_lock_irqsave(&idio16gpio->lock, flags);
+
+	if (value)
+		idio16gpio->out_state |= mask;
+	else
+		idio16gpio->out_state &= ~mask;
+
+	if (offset > 7)
+		outb(idio16gpio->out_state >> 8, idio16gpio->base + 4);
+	else
+		outb(idio16gpio->out_state, idio16gpio->base);
+
+	raw_spin_unlock_irqrestore(&idio16gpio->lock, flags);
+}
+
+static void idio_16_gpio_set_multiple(struct gpio_chip *chip,
+	unsigned long *mask, unsigned long *bits)
+{
+	struct idio_16_gpio *const idio16gpio = gpiochip_get_data(chip);
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&idio16gpio->lock, flags);
+
+	idio16gpio->out_state &= ~*mask;
+	idio16gpio->out_state |= *mask & *bits;
+
+	if (*mask & 0xFF)
+		outb(idio16gpio->out_state, idio16gpio->base);
+	if ((*mask >> 8) & 0xFF)
+		outb(idio16gpio->out_state >> 8, idio16gpio->base + 4);
+
+	raw_spin_unlock_irqrestore(&idio16gpio->lock, flags);
+}
+
+static void idio_16_irq_ack(struct irq_data *data)
+{
+}
+
+static void idio_16_irq_mask(struct irq_data *data)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+	struct idio_16_gpio *const idio16gpio = gpiochip_get_data(chip);
+	const unsigned long mask = BIT(irqd_to_hwirq(data));
+	unsigned long flags;
+
+	idio16gpio->irq_mask &= ~mask;
+
+	if (!idio16gpio->irq_mask) {
+		raw_spin_lock_irqsave(&idio16gpio->lock, flags);
+
+		outb(0, idio16gpio->base + 2);
+
+		raw_spin_unlock_irqrestore(&idio16gpio->lock, flags);
+	}
+}
+
+static void idio_16_irq_unmask(struct irq_data *data)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+	struct idio_16_gpio *const idio16gpio = gpiochip_get_data(chip);
+	const unsigned long mask = BIT(irqd_to_hwirq(data));
+	const unsigned long prev_irq_mask = idio16gpio->irq_mask;
+	unsigned long flags;
+
+	idio16gpio->irq_mask |= mask;
+
+	if (!prev_irq_mask) {
+		raw_spin_lock_irqsave(&idio16gpio->lock, flags);
+
+		inb(idio16gpio->base + 2);
+
+		raw_spin_unlock_irqrestore(&idio16gpio->lock, flags);
+	}
+}
+
+static int idio_16_irq_set_type(struct irq_data *data, unsigned flow_type)
+{
+	/* The only valid irq types are none and both-edges */
+	if (flow_type != IRQ_TYPE_NONE &&
+		(flow_type & IRQ_TYPE_EDGE_BOTH) != IRQ_TYPE_EDGE_BOTH)
+		return -EINVAL;
+
+	return 0;
+}
+
+static struct irq_chip idio_16_irqchip = {
+	.name = "104-idio-16",
+	.irq_ack = idio_16_irq_ack,
+	.irq_mask = idio_16_irq_mask,
+	.irq_unmask = idio_16_irq_unmask,
+	.irq_set_type = idio_16_irq_set_type
+};
+
+static irqreturn_t idio_16_irq_handler(int irq, void *dev_id)
+{
+	struct idio_16_gpio *const idio16gpio = dev_id;
+	struct gpio_chip *const chip = &idio16gpio->chip;
+	int gpio;
+
+	for_each_set_bit(gpio, &idio16gpio->irq_mask, chip->ngpio)
+		generic_handle_irq(irq_find_mapping(chip->irq.domain, gpio));
+
+	raw_spin_lock(&idio16gpio->lock);
+
+	outb(0, idio16gpio->base + 1);
+
+	raw_spin_unlock(&idio16gpio->lock);
+
+	return IRQ_HANDLED;
+}
+
+#define IDIO_16_NGPIO 32
+static const char *idio_16_names[IDIO_16_NGPIO] = {
+	"OUT0", "OUT1", "OUT2", "OUT3", "OUT4", "OUT5", "OUT6", "OUT7",
+	"OUT8", "OUT9", "OUT10", "OUT11", "OUT12", "OUT13", "OUT14", "OUT15",
+	"IIN0", "IIN1", "IIN2", "IIN3", "IIN4", "IIN5", "IIN6", "IIN7",
+	"IIN8", "IIN9", "IIN10", "IIN11", "IIN12", "IIN13", "IIN14", "IIN15"
+};
+
+static int idio_16_irq_init_hw(struct gpio_chip *gc)
+{
+	struct idio_16_gpio *const idio16gpio = gpiochip_get_data(gc);
+
+	/* Disable IRQ by default */
+	outb(0, idio16gpio->base + 2);
+	outb(0, idio16gpio->base + 1);
+
+	return 0;
+}
+
+static int idio_16_probe(struct device *dev, unsigned int id)
+{
+	struct idio_16_gpio *idio16gpio;
+	const char *const name = dev_name(dev);
+	struct gpio_irq_chip *girq;
+	int err;
+
+	idio16gpio = devm_kzalloc(dev, sizeof(*idio16gpio), GFP_KERNEL);
+	if (!idio16gpio)
+		return -ENOMEM;
+
+	if (!devm_request_region(dev, base[id], IDIO_16_EXTENT, name)) {
+		dev_err(dev, "Unable to lock port addresses (0x%X-0x%X)\n",
+			base[id], base[id] + IDIO_16_EXTENT);
+		return -EBUSY;
+	}
+
+	idio16gpio->chip.label = name;
+	idio16gpio->chip.parent = dev;
+	idio16gpio->chip.owner = THIS_MODULE;
+	idio16gpio->chip.base = -1;
+	idio16gpio->chip.ngpio = IDIO_16_NGPIO;
+	idio16gpio->chip.names = idio_16_names;
+	idio16gpio->chip.get_direction = idio_16_gpio_get_direction;
+	idio16gpio->chip.direction_input = idio_16_gpio_direction_input;
+	idio16gpio->chip.direction_output = idio_16_gpio_direction_output;
+	idio16gpio->chip.get = idio_16_gpio_get;
+	idio16gpio->chip.get_multiple = idio_16_gpio_get_multiple;
+	idio16gpio->chip.set = idio_16_gpio_set;
+	idio16gpio->chip.set_multiple = idio_16_gpio_set_multiple;
+	idio16gpio->base = base[id];
+	idio16gpio->out_state = 0xFFFF;
+
+	girq = &idio16gpio->chip.irq;
+	girq->chip = &idio_16_irqchip;
+	/* This will let us handle the parent IRQ in the driver */
+	girq->parent_handler = NULL;
+	girq->num_parents = 0;
+	girq->parents = NULL;
+	girq->default_type = IRQ_TYPE_NONE;
+	girq->handler = handle_edge_irq;
+	girq->init_hw = idio_16_irq_init_hw;
+
+	raw_spin_lock_init(&idio16gpio->lock);
+
+	err = devm_gpiochip_add_data(dev, &idio16gpio->chip, idio16gpio);
+	if (err) {
+		dev_err(dev, "GPIO registering failed (%d)\n", err);
+		return err;
+	}
+
+	err = devm_request_irq(dev, irq[id], idio_16_irq_handler, 0, name,
+		idio16gpio);
+	if (err) {
+		dev_err(dev, "IRQ handler registering failed (%d)\n", err);
+		return err;
+	}
+
+	return 0;
+}
+
+static struct isa_driver idio_16_driver = {
+	.probe = idio_16_probe,
+	.driver = {
+		.name = "104-idio-16"
+	},
+};
+
+module_isa_driver(idio_16_driver, num_idio_16);
+
+MODULE_AUTHOR("William Breathitt Gray <vilhelm.gray@gmail.com>");
+MODULE_DESCRIPTION("ACCES 104-IDIO-16 GPIO driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-74x164.c b/drivers/gpio/gpio-74x164.c
new file mode 100644
index 000000000..05637d585
--- /dev/null
+++ b/drivers/gpio/gpio-74x164.c
@@ -0,0 +1,197 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  74Hx164 - Generic serial-in/parallel-out 8-bits shift register GPIO driver
+ *
+ *  Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2010 Miguel Gaio <miguel.gaio@efixo.com>
+ */
+
+#include <linux/bitops.h>
+#include <linux/gpio/consumer.h>
+#include <linux/gpio/driver.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/property.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+
+#define GEN_74X164_NUMBER_GPIOS	8
+
+struct gen_74x164_chip {
+	struct gpio_chip	gpio_chip;
+	struct mutex		lock;
+	struct gpio_desc	*gpiod_oe;
+	u32			registers;
+	/*
+	 * Since the registers are chained, every byte sent will make
+	 * the previous byte shift to the next register in the
+	 * chain. Thus, the first byte sent will end up in the last
+	 * register at the end of the transfer. So, to have a logical
+	 * numbering, store the bytes in reverse order.
+	 */
+	u8			buffer[];
+};
+
+static int __gen_74x164_write_config(struct gen_74x164_chip *chip)
+{
+	return spi_write(to_spi_device(chip->gpio_chip.parent), chip->buffer,
+			 chip->registers);
+}
+
+static int gen_74x164_get_value(struct gpio_chip *gc, unsigned offset)
+{
+	struct gen_74x164_chip *chip = gpiochip_get_data(gc);
+	u8 bank = chip->registers - 1 - offset / 8;
+	u8 pin = offset % 8;
+	int ret;
+
+	mutex_lock(&chip->lock);
+	ret = (chip->buffer[bank] >> pin) & 0x1;
+	mutex_unlock(&chip->lock);
+
+	return ret;
+}
+
+static void gen_74x164_set_value(struct gpio_chip *gc,
+		unsigned offset, int val)
+{
+	struct gen_74x164_chip *chip = gpiochip_get_data(gc);
+	u8 bank = chip->registers - 1 - offset / 8;
+	u8 pin = offset % 8;
+
+	mutex_lock(&chip->lock);
+	if (val)
+		chip->buffer[bank] |= (1 << pin);
+	else
+		chip->buffer[bank] &= ~(1 << pin);
+
+	__gen_74x164_write_config(chip);
+	mutex_unlock(&chip->lock);
+}
+
+static void gen_74x164_set_multiple(struct gpio_chip *gc, unsigned long *mask,
+				    unsigned long *bits)
+{
+	struct gen_74x164_chip *chip = gpiochip_get_data(gc);
+	unsigned long offset;
+	unsigned long bankmask;
+	size_t bank;
+	unsigned long bitmask;
+
+	mutex_lock(&chip->lock);
+	for_each_set_clump8(offset, bankmask, mask, chip->registers * 8) {
+		bank = chip->registers - 1 - offset / 8;
+		bitmask = bitmap_get_value8(bits, offset) & bankmask;
+
+		chip->buffer[bank] &= ~bankmask;
+		chip->buffer[bank] |= bitmask;
+	}
+	__gen_74x164_write_config(chip);
+	mutex_unlock(&chip->lock);
+}
+
+static int gen_74x164_direction_output(struct gpio_chip *gc,
+		unsigned offset, int val)
+{
+	gen_74x164_set_value(gc, offset, val);
+	return 0;
+}
+
+static int gen_74x164_probe(struct spi_device *spi)
+{
+	struct gen_74x164_chip *chip;
+	u32 nregs;
+	int ret;
+
+	/*
+	 * bits_per_word cannot be configured in platform data
+	 */
+	spi->bits_per_word = 8;
+
+	ret = spi_setup(spi);
+	if (ret < 0)
+		return ret;
+
+	ret = device_property_read_u32(&spi->dev, "registers-number", &nregs);
+	if (ret) {
+		dev_err(&spi->dev, "Missing 'registers-number' property.\n");
+		return -EINVAL;
+	}
+
+	chip = devm_kzalloc(&spi->dev, sizeof(*chip) + nregs, GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	chip->gpiod_oe = devm_gpiod_get_optional(&spi->dev, "enable",
+						 GPIOD_OUT_LOW);
+	if (IS_ERR(chip->gpiod_oe))
+		return PTR_ERR(chip->gpiod_oe);
+
+	gpiod_set_value_cansleep(chip->gpiod_oe, 1);
+
+	spi_set_drvdata(spi, chip);
+
+	chip->gpio_chip.label = spi->modalias;
+	chip->gpio_chip.direction_output = gen_74x164_direction_output;
+	chip->gpio_chip.get = gen_74x164_get_value;
+	chip->gpio_chip.set = gen_74x164_set_value;
+	chip->gpio_chip.set_multiple = gen_74x164_set_multiple;
+	chip->gpio_chip.base = -1;
+
+	chip->registers = nregs;
+	chip->gpio_chip.ngpio = GEN_74X164_NUMBER_GPIOS * chip->registers;
+
+	chip->gpio_chip.can_sleep = true;
+	chip->gpio_chip.parent = &spi->dev;
+	chip->gpio_chip.owner = THIS_MODULE;
+
+	mutex_init(&chip->lock);
+
+	ret = __gen_74x164_write_config(chip);
+	if (ret) {
+		dev_err(&spi->dev, "Failed writing: %d\n", ret);
+		goto exit_destroy;
+	}
+
+	ret = gpiochip_add_data(&chip->gpio_chip, chip);
+	if (!ret)
+		return 0;
+
+exit_destroy:
+	mutex_destroy(&chip->lock);
+
+	return ret;
+}
+
+static int gen_74x164_remove(struct spi_device *spi)
+{
+	struct gen_74x164_chip *chip = spi_get_drvdata(spi);
+
+	gpiod_set_value_cansleep(chip->gpiod_oe, 0);
+	gpiochip_remove(&chip->gpio_chip);
+	mutex_destroy(&chip->lock);
+
+	return 0;
+}
+
+static const struct of_device_id gen_74x164_dt_ids[] = {
+	{ .compatible = "fairchild,74hc595" },
+	{ .compatible = "nxp,74lvc594" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, gen_74x164_dt_ids);
+
+static struct spi_driver gen_74x164_driver = {
+	.driver = {
+		.name		= "74x164",
+		.of_match_table	= gen_74x164_dt_ids,
+	},
+	.probe		= gen_74x164_probe,
+	.remove		= gen_74x164_remove,
+};
+module_spi_driver(gen_74x164_driver);
+
+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
+MODULE_AUTHOR("Miguel Gaio <miguel.gaio@efixo.com>");
+MODULE_DESCRIPTION("GPIO expander driver for 74X164 8-bits shift register");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-74xx-mmio.c b/drivers/gpio/gpio-74xx-mmio.c
new file mode 100644
index 000000000..173e06758
--- /dev/null
+++ b/drivers/gpio/gpio-74xx-mmio.c
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * 74xx MMIO GPIO driver
+ *
+ *  Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ */
+
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/gpio/driver.h>
+#include <linux/platform_device.h>
+
+#define MMIO_74XX_DIR_IN	(0 << 8)
+#define MMIO_74XX_DIR_OUT	(1 << 8)
+#define MMIO_74XX_BIT_CNT(x)	((x) & 0xff)
+
+struct mmio_74xx_gpio_priv {
+	struct gpio_chip	gc;
+	unsigned		flags;
+};
+
+static const struct of_device_id mmio_74xx_gpio_ids[] = {
+	{
+		.compatible	= "ti,741g125",
+		.data		= (const void *)(MMIO_74XX_DIR_IN | 1),
+	},
+	{
+		.compatible	= "ti,742g125",
+		.data		= (const void *)(MMIO_74XX_DIR_IN | 2),
+	},
+	{
+		.compatible	= "ti,74125",
+		.data		= (const void *)(MMIO_74XX_DIR_IN | 4),
+	},
+	{
+		.compatible	= "ti,74365",
+		.data		= (const void *)(MMIO_74XX_DIR_IN | 6),
+	},
+	{
+		.compatible	= "ti,74244",
+		.data		= (const void *)(MMIO_74XX_DIR_IN | 8),
+	},
+	{
+		.compatible	= "ti,741624",
+		.data		= (const void *)(MMIO_74XX_DIR_IN | 16),
+	},
+	{
+		.compatible	= "ti,741g74",
+		.data		= (const void *)(MMIO_74XX_DIR_OUT | 1),
+	},
+	{
+		.compatible	= "ti,7474",
+		.data		= (const void *)(MMIO_74XX_DIR_OUT | 2),
+	},
+	{
+		.compatible	= "ti,74175",
+		.data		= (const void *)(MMIO_74XX_DIR_OUT | 4),
+	},
+	{
+		.compatible	= "ti,74174",
+		.data		= (const void *)(MMIO_74XX_DIR_OUT | 6),
+	},
+	{
+		.compatible	= "ti,74273",
+		.data		= (const void *)(MMIO_74XX_DIR_OUT | 8),
+	},
+	{
+		.compatible	= "ti,7416374",
+		.data		= (const void *)(MMIO_74XX_DIR_OUT | 16),
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, mmio_74xx_gpio_ids);
+
+static int mmio_74xx_get_direction(struct gpio_chip *gc, unsigned offset)
+{
+	struct mmio_74xx_gpio_priv *priv = gpiochip_get_data(gc);
+
+	if (priv->flags & MMIO_74XX_DIR_OUT)
+		return GPIO_LINE_DIRECTION_OUT;
+
+	return  GPIO_LINE_DIRECTION_IN;
+}
+
+static int mmio_74xx_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct mmio_74xx_gpio_priv *priv = gpiochip_get_data(gc);
+
+	return (priv->flags & MMIO_74XX_DIR_OUT) ? -ENOTSUPP : 0;
+}
+
+static int mmio_74xx_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+	struct mmio_74xx_gpio_priv *priv = gpiochip_get_data(gc);
+
+	if (priv->flags & MMIO_74XX_DIR_OUT) {
+		gc->set(gc, gpio, val);
+		return 0;
+	}
+
+	return -ENOTSUPP;
+}
+
+static int mmio_74xx_gpio_probe(struct platform_device *pdev)
+{
+	struct mmio_74xx_gpio_priv *priv;
+	void __iomem *dat;
+	int err;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->flags = (uintptr_t)of_device_get_match_data(&pdev->dev);
+
+	dat = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(dat))
+		return PTR_ERR(dat);
+
+	err = bgpio_init(&priv->gc, &pdev->dev,
+			 DIV_ROUND_UP(MMIO_74XX_BIT_CNT(priv->flags), 8),
+			 dat, NULL, NULL, NULL, NULL, 0);
+	if (err)
+		return err;
+
+	priv->gc.direction_input = mmio_74xx_dir_in;
+	priv->gc.direction_output = mmio_74xx_dir_out;
+	priv->gc.get_direction = mmio_74xx_get_direction;
+	priv->gc.ngpio = MMIO_74XX_BIT_CNT(priv->flags);
+	priv->gc.owner = THIS_MODULE;
+
+	platform_set_drvdata(pdev, priv);
+
+	return devm_gpiochip_add_data(&pdev->dev, &priv->gc, priv);
+}
+
+static struct platform_driver mmio_74xx_gpio_driver = {
+	.driver	= {
+		.name		= "74xx-mmio-gpio",
+		.of_match_table	= mmio_74xx_gpio_ids,
+	},
+	.probe	= mmio_74xx_gpio_probe,
+};
+module_platform_driver(mmio_74xx_gpio_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Alexander Shiyan <shc_work@mail.ru>");
+MODULE_DESCRIPTION("74xx MMIO GPIO driver");
diff --git a/drivers/gpio/gpio-adnp.c b/drivers/gpio/gpio-adnp.c
new file mode 100644
index 000000000..8eedfc645
--- /dev/null
+++ b/drivers/gpio/gpio-adnp.c
@@ -0,0 +1,546 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2011-2012 Avionic Design GmbH
+ */
+
+#include <linux/gpio/driver.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of_irq.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+
+#define GPIO_DDR(gpio) (0x00 << (gpio)->reg_shift)
+#define GPIO_PLR(gpio) (0x01 << (gpio)->reg_shift)
+#define GPIO_IER(gpio) (0x02 << (gpio)->reg_shift)
+#define GPIO_ISR(gpio) (0x03 << (gpio)->reg_shift)
+#define GPIO_PTR(gpio) (0x04 << (gpio)->reg_shift)
+
+struct adnp {
+	struct i2c_client *client;
+	struct gpio_chip gpio;
+	unsigned int reg_shift;
+
+	struct mutex i2c_lock;
+	struct mutex irq_lock;
+
+	u8 *irq_enable;
+	u8 *irq_level;
+	u8 *irq_rise;
+	u8 *irq_fall;
+	u8 *irq_high;
+	u8 *irq_low;
+};
+
+static int adnp_read(struct adnp *adnp, unsigned offset, uint8_t *value)
+{
+	int err;
+
+	err = i2c_smbus_read_byte_data(adnp->client, offset);
+	if (err < 0) {
+		dev_err(adnp->gpio.parent, "%s failed: %d\n",
+			"i2c_smbus_read_byte_data()", err);
+		return err;
+	}
+
+	*value = err;
+	return 0;
+}
+
+static int adnp_write(struct adnp *adnp, unsigned offset, uint8_t value)
+{
+	int err;
+
+	err = i2c_smbus_write_byte_data(adnp->client, offset, value);
+	if (err < 0) {
+		dev_err(adnp->gpio.parent, "%s failed: %d\n",
+			"i2c_smbus_write_byte_data()", err);
+		return err;
+	}
+
+	return 0;
+}
+
+static int adnp_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct adnp *adnp = gpiochip_get_data(chip);
+	unsigned int reg = offset >> adnp->reg_shift;
+	unsigned int pos = offset & 7;
+	u8 value;
+	int err;
+
+	err = adnp_read(adnp, GPIO_PLR(adnp) + reg, &value);
+	if (err < 0)
+		return err;
+
+	return (value & BIT(pos)) ? 1 : 0;
+}
+
+static void __adnp_gpio_set(struct adnp *adnp, unsigned offset, int value)
+{
+	unsigned int reg = offset >> adnp->reg_shift;
+	unsigned int pos = offset & 7;
+	int err;
+	u8 val;
+
+	err = adnp_read(adnp, GPIO_PLR(adnp) + reg, &val);
+	if (err < 0)
+		return;
+
+	if (value)
+		val |= BIT(pos);
+	else
+		val &= ~BIT(pos);
+
+	adnp_write(adnp, GPIO_PLR(adnp) + reg, val);
+}
+
+static void adnp_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct adnp *adnp = gpiochip_get_data(chip);
+
+	mutex_lock(&adnp->i2c_lock);
+	__adnp_gpio_set(adnp, offset, value);
+	mutex_unlock(&adnp->i2c_lock);
+}
+
+static int adnp_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct adnp *adnp = gpiochip_get_data(chip);
+	unsigned int reg = offset >> adnp->reg_shift;
+	unsigned int pos = offset & 7;
+	u8 value;
+	int err;
+
+	mutex_lock(&adnp->i2c_lock);
+
+	err = adnp_read(adnp, GPIO_DDR(adnp) + reg, &value);
+	if (err < 0)
+		goto out;
+
+	value &= ~BIT(pos);
+
+	err = adnp_write(adnp, GPIO_DDR(adnp) + reg, value);
+	if (err < 0)
+		goto out;
+
+	err = adnp_read(adnp, GPIO_DDR(adnp) + reg, &value);
+	if (err < 0)
+		goto out;
+
+	if (value & BIT(pos)) {
+		err = -EPERM;
+		goto out;
+	}
+
+	err = 0;
+
+out:
+	mutex_unlock(&adnp->i2c_lock);
+	return err;
+}
+
+static int adnp_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
+				      int value)
+{
+	struct adnp *adnp = gpiochip_get_data(chip);
+	unsigned int reg = offset >> adnp->reg_shift;
+	unsigned int pos = offset & 7;
+	int err;
+	u8 val;
+
+	mutex_lock(&adnp->i2c_lock);
+
+	err = adnp_read(adnp, GPIO_DDR(adnp) + reg, &val);
+	if (err < 0)
+		goto out;
+
+	val |= BIT(pos);
+
+	err = adnp_write(adnp, GPIO_DDR(adnp) + reg, val);
+	if (err < 0)
+		goto out;
+
+	err = adnp_read(adnp, GPIO_DDR(adnp) + reg, &val);
+	if (err < 0)
+		goto out;
+
+	if (!(val & BIT(pos))) {
+		err = -EPERM;
+		goto out;
+	}
+
+	__adnp_gpio_set(adnp, offset, value);
+	err = 0;
+
+out:
+	mutex_unlock(&adnp->i2c_lock);
+	return err;
+}
+
+static void adnp_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
+{
+	struct adnp *adnp = gpiochip_get_data(chip);
+	unsigned int num_regs = 1 << adnp->reg_shift, i, j;
+	int err;
+
+	for (i = 0; i < num_regs; i++) {
+		u8 ddr, plr, ier, isr;
+
+		mutex_lock(&adnp->i2c_lock);
+
+		err = adnp_read(adnp, GPIO_DDR(adnp) + i, &ddr);
+		if (err < 0)
+			goto unlock;
+
+		err = adnp_read(adnp, GPIO_PLR(adnp) + i, &plr);
+		if (err < 0)
+			goto unlock;
+
+		err = adnp_read(adnp, GPIO_IER(adnp) + i, &ier);
+		if (err < 0)
+			goto unlock;
+
+		err = adnp_read(adnp, GPIO_ISR(adnp) + i, &isr);
+		if (err < 0)
+			goto unlock;
+
+		mutex_unlock(&adnp->i2c_lock);
+
+		for (j = 0; j < 8; j++) {
+			unsigned int bit = (i << adnp->reg_shift) + j;
+			const char *direction = "input ";
+			const char *level = "low ";
+			const char *interrupt = "disabled";
+			const char *pending = "";
+
+			if (ddr & BIT(j))
+				direction = "output";
+
+			if (plr & BIT(j))
+				level = "high";
+
+			if (ier & BIT(j))
+				interrupt = "enabled ";
+
+			if (isr & BIT(j))
+				pending = "pending";
+
+			seq_printf(s, "%2u: %s %s IRQ %s %s\n", bit,
+				   direction, level, interrupt, pending);
+		}
+	}
+
+	return;
+
+unlock:
+	mutex_unlock(&adnp->i2c_lock);
+}
+
+static irqreturn_t adnp_irq(int irq, void *data)
+{
+	struct adnp *adnp = data;
+	unsigned int num_regs, i;
+
+	num_regs = 1 << adnp->reg_shift;
+
+	for (i = 0; i < num_regs; i++) {
+		unsigned int base = i << adnp->reg_shift, bit;
+		u8 changed, level, isr, ier;
+		unsigned long pending;
+		int err;
+
+		mutex_lock(&adnp->i2c_lock);
+
+		err = adnp_read(adnp, GPIO_PLR(adnp) + i, &level);
+		if (err < 0) {
+			mutex_unlock(&adnp->i2c_lock);
+			continue;
+		}
+
+		err = adnp_read(adnp, GPIO_ISR(adnp) + i, &isr);
+		if (err < 0) {
+			mutex_unlock(&adnp->i2c_lock);
+			continue;
+		}
+
+		err = adnp_read(adnp, GPIO_IER(adnp) + i, &ier);
+		if (err < 0) {
+			mutex_unlock(&adnp->i2c_lock);
+			continue;
+		}
+
+		mutex_unlock(&adnp->i2c_lock);
+
+		/* determine pins that changed levels */
+		changed = level ^ adnp->irq_level[i];
+
+		/* compute edge-triggered interrupts */
+		pending = changed & ((adnp->irq_fall[i] & ~level) |
+				     (adnp->irq_rise[i] & level));
+
+		/* add in level-triggered interrupts */
+		pending |= (adnp->irq_high[i] & level) |
+			   (adnp->irq_low[i] & ~level);
+
+		/* mask out non-pending and disabled interrupts */
+		pending &= isr & ier;
+
+		for_each_set_bit(bit, &pending, 8) {
+			unsigned int child_irq;
+			child_irq = irq_find_mapping(adnp->gpio.irq.domain,
+						     base + bit);
+			handle_nested_irq(child_irq);
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void adnp_irq_mask(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct adnp *adnp = gpiochip_get_data(gc);
+	unsigned int reg = d->hwirq >> adnp->reg_shift;
+	unsigned int pos = d->hwirq & 7;
+
+	adnp->irq_enable[reg] &= ~BIT(pos);
+}
+
+static void adnp_irq_unmask(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct adnp *adnp = gpiochip_get_data(gc);
+	unsigned int reg = d->hwirq >> adnp->reg_shift;
+	unsigned int pos = d->hwirq & 7;
+
+	adnp->irq_enable[reg] |= BIT(pos);
+}
+
+static int adnp_irq_set_type(struct irq_data *d, unsigned int type)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct adnp *adnp = gpiochip_get_data(gc);
+	unsigned int reg = d->hwirq >> adnp->reg_shift;
+	unsigned int pos = d->hwirq & 7;
+
+	if (type & IRQ_TYPE_EDGE_RISING)
+		adnp->irq_rise[reg] |= BIT(pos);
+	else
+		adnp->irq_rise[reg] &= ~BIT(pos);
+
+	if (type & IRQ_TYPE_EDGE_FALLING)
+		adnp->irq_fall[reg] |= BIT(pos);
+	else
+		adnp->irq_fall[reg] &= ~BIT(pos);
+
+	if (type & IRQ_TYPE_LEVEL_HIGH)
+		adnp->irq_high[reg] |= BIT(pos);
+	else
+		adnp->irq_high[reg] &= ~BIT(pos);
+
+	if (type & IRQ_TYPE_LEVEL_LOW)
+		adnp->irq_low[reg] |= BIT(pos);
+	else
+		adnp->irq_low[reg] &= ~BIT(pos);
+
+	return 0;
+}
+
+static void adnp_irq_bus_lock(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct adnp *adnp = gpiochip_get_data(gc);
+
+	mutex_lock(&adnp->irq_lock);
+}
+
+static void adnp_irq_bus_unlock(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct adnp *adnp = gpiochip_get_data(gc);
+	unsigned int num_regs = 1 << adnp->reg_shift, i;
+
+	mutex_lock(&adnp->i2c_lock);
+
+	for (i = 0; i < num_regs; i++)
+		adnp_write(adnp, GPIO_IER(adnp) + i, adnp->irq_enable[i]);
+
+	mutex_unlock(&adnp->i2c_lock);
+	mutex_unlock(&adnp->irq_lock);
+}
+
+static struct irq_chip adnp_irq_chip = {
+	.name = "gpio-adnp",
+	.irq_mask = adnp_irq_mask,
+	.irq_unmask = adnp_irq_unmask,
+	.irq_set_type = adnp_irq_set_type,
+	.irq_bus_lock = adnp_irq_bus_lock,
+	.irq_bus_sync_unlock = adnp_irq_bus_unlock,
+};
+
+static int adnp_irq_setup(struct adnp *adnp)
+{
+	unsigned int num_regs = 1 << adnp->reg_shift, i;
+	struct gpio_chip *chip = &adnp->gpio;
+	int err;
+
+	mutex_init(&adnp->irq_lock);
+
+	/*
+	 * Allocate memory to keep track of the current level and trigger
+	 * modes of the interrupts. To avoid multiple allocations, a single
+	 * large buffer is allocated and pointers are setup to point at the
+	 * corresponding offsets. For consistency, the layout of the buffer
+	 * is chosen to match the register layout of the hardware in that
+	 * each segment contains the corresponding bits for all interrupts.
+	 */
+	adnp->irq_enable = devm_kcalloc(chip->parent, num_regs, 6,
+					GFP_KERNEL);
+	if (!adnp->irq_enable)
+		return -ENOMEM;
+
+	adnp->irq_level = adnp->irq_enable + (num_regs * 1);
+	adnp->irq_rise = adnp->irq_enable + (num_regs * 2);
+	adnp->irq_fall = adnp->irq_enable + (num_regs * 3);
+	adnp->irq_high = adnp->irq_enable + (num_regs * 4);
+	adnp->irq_low = adnp->irq_enable + (num_regs * 5);
+
+	for (i = 0; i < num_regs; i++) {
+		/*
+		 * Read the initial level of all pins to allow the emulation
+		 * of edge triggered interrupts.
+		 */
+		err = adnp_read(adnp, GPIO_PLR(adnp) + i, &adnp->irq_level[i]);
+		if (err < 0)
+			return err;
+
+		/* disable all interrupts */
+		err = adnp_write(adnp, GPIO_IER(adnp) + i, 0);
+		if (err < 0)
+			return err;
+
+		adnp->irq_enable[i] = 0x00;
+	}
+
+	err = devm_request_threaded_irq(chip->parent, adnp->client->irq,
+					NULL, adnp_irq,
+					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					dev_name(chip->parent), adnp);
+	if (err != 0) {
+		dev_err(chip->parent, "can't request IRQ#%d: %d\n",
+			adnp->client->irq, err);
+		return err;
+	}
+
+	return 0;
+}
+
+static int adnp_gpio_setup(struct adnp *adnp, unsigned int num_gpios,
+			   bool is_irq_controller)
+{
+	struct gpio_chip *chip = &adnp->gpio;
+	int err;
+
+	adnp->reg_shift = get_count_order(num_gpios) - 3;
+
+	chip->direction_input = adnp_gpio_direction_input;
+	chip->direction_output = adnp_gpio_direction_output;
+	chip->get = adnp_gpio_get;
+	chip->set = adnp_gpio_set;
+	chip->can_sleep = true;
+
+	if (IS_ENABLED(CONFIG_DEBUG_FS))
+		chip->dbg_show = adnp_gpio_dbg_show;
+
+	chip->base = -1;
+	chip->ngpio = num_gpios;
+	chip->label = adnp->client->name;
+	chip->parent = &adnp->client->dev;
+	chip->of_node = chip->parent->of_node;
+	chip->owner = THIS_MODULE;
+
+	if (is_irq_controller) {
+		struct gpio_irq_chip *girq;
+
+		err = adnp_irq_setup(adnp);
+		if (err)
+			return err;
+
+		girq = &chip->irq;
+		girq->chip = &adnp_irq_chip;
+		/* This will let us handle the parent IRQ in the driver */
+		girq->parent_handler = NULL;
+		girq->num_parents = 0;
+		girq->parents = NULL;
+		girq->default_type = IRQ_TYPE_NONE;
+		girq->handler = handle_simple_irq;
+		girq->threaded = true;
+	}
+
+	err = devm_gpiochip_add_data(&adnp->client->dev, chip, adnp);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static int adnp_i2c_probe(struct i2c_client *client,
+				    const struct i2c_device_id *id)
+{
+	struct device_node *np = client->dev.of_node;
+	struct adnp *adnp;
+	u32 num_gpios;
+	int err;
+
+	err = of_property_read_u32(np, "nr-gpios", &num_gpios);
+	if (err < 0)
+		return err;
+
+	client->irq = irq_of_parse_and_map(np, 0);
+	if (!client->irq)
+		return -EPROBE_DEFER;
+
+	adnp = devm_kzalloc(&client->dev, sizeof(*adnp), GFP_KERNEL);
+	if (!adnp)
+		return -ENOMEM;
+
+	mutex_init(&adnp->i2c_lock);
+	adnp->client = client;
+
+	err = adnp_gpio_setup(adnp, num_gpios,
+			of_property_read_bool(np, "interrupt-controller"));
+	if (err)
+		return err;
+
+	i2c_set_clientdata(client, adnp);
+
+	return 0;
+}
+
+static const struct i2c_device_id adnp_i2c_id[] = {
+	{ "gpio-adnp" },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, adnp_i2c_id);
+
+static const struct of_device_id adnp_of_match[] = {
+	{ .compatible = "ad,gpio-adnp", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, adnp_of_match);
+
+static struct i2c_driver adnp_i2c_driver = {
+	.driver = {
+		.name = "gpio-adnp",
+		.of_match_table = adnp_of_match,
+	},
+	.probe = adnp_i2c_probe,
+	.id_table = adnp_i2c_id,
+};
+module_i2c_driver(adnp_i2c_driver);
+
+MODULE_DESCRIPTION("Avionic Design N-bit GPIO expander");
+MODULE_AUTHOR("Thierry Reding <thierry.reding@avionic-design.de>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/gpio-adp5520.c b/drivers/gpio/gpio-adp5520.c
new file mode 100644
index 000000000..0386ede53
--- /dev/null
+++ b/drivers/gpio/gpio-adp5520.c
@@ -0,0 +1,177 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * GPIO driver for Analog Devices ADP5520 MFD PMICs
+ *
+ * Copyright 2009 Analog Devices Inc.
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/adp5520.h>
+#include <linux/gpio/driver.h>
+
+struct adp5520_gpio {
+	struct device *master;
+	struct gpio_chip gpio_chip;
+	unsigned char lut[ADP5520_MAXGPIOS];
+	unsigned long output;
+};
+
+static int adp5520_gpio_get_value(struct gpio_chip *chip, unsigned off)
+{
+	struct adp5520_gpio *dev;
+	uint8_t reg_val;
+
+	dev = gpiochip_get_data(chip);
+
+	/*
+	 * There are dedicated registers for GPIO IN/OUT.
+	 * Make sure we return the right value, even when configured as output
+	 */
+
+	if (test_bit(off, &dev->output))
+		adp5520_read(dev->master, ADP5520_GPIO_OUT, &reg_val);
+	else
+		adp5520_read(dev->master, ADP5520_GPIO_IN, &reg_val);
+
+	return !!(reg_val & dev->lut[off]);
+}
+
+static void adp5520_gpio_set_value(struct gpio_chip *chip,
+		unsigned off, int val)
+{
+	struct adp5520_gpio *dev;
+	dev = gpiochip_get_data(chip);
+
+	if (val)
+		adp5520_set_bits(dev->master, ADP5520_GPIO_OUT, dev->lut[off]);
+	else
+		adp5520_clr_bits(dev->master, ADP5520_GPIO_OUT, dev->lut[off]);
+}
+
+static int adp5520_gpio_direction_input(struct gpio_chip *chip, unsigned off)
+{
+	struct adp5520_gpio *dev;
+	dev = gpiochip_get_data(chip);
+
+	clear_bit(off, &dev->output);
+
+	return adp5520_clr_bits(dev->master, ADP5520_GPIO_CFG_2,
+				dev->lut[off]);
+}
+
+static int adp5520_gpio_direction_output(struct gpio_chip *chip,
+		unsigned off, int val)
+{
+	struct adp5520_gpio *dev;
+	int ret = 0;
+	dev = gpiochip_get_data(chip);
+
+	set_bit(off, &dev->output);
+
+	if (val)
+		ret |= adp5520_set_bits(dev->master, ADP5520_GPIO_OUT,
+					dev->lut[off]);
+	else
+		ret |= adp5520_clr_bits(dev->master, ADP5520_GPIO_OUT,
+					dev->lut[off]);
+
+	ret |= adp5520_set_bits(dev->master, ADP5520_GPIO_CFG_2,
+					dev->lut[off]);
+
+	return ret;
+}
+
+static int adp5520_gpio_probe(struct platform_device *pdev)
+{
+	struct adp5520_gpio_platform_data *pdata = dev_get_platdata(&pdev->dev);
+	struct adp5520_gpio *dev;
+	struct gpio_chip *gc;
+	int ret, i, gpios;
+	unsigned char ctl_mask = 0;
+
+	if (pdata == NULL) {
+		dev_err(&pdev->dev, "missing platform data\n");
+		return -ENODEV;
+	}
+
+	if (pdev->id != ID_ADP5520) {
+		dev_err(&pdev->dev, "only ADP5520 supports GPIO\n");
+		return -ENODEV;
+	}
+
+	dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
+	if (dev == NULL)
+		return -ENOMEM;
+
+	dev->master = pdev->dev.parent;
+
+	for (gpios = 0, i = 0; i < ADP5520_MAXGPIOS; i++)
+		if (pdata->gpio_en_mask & (1 << i))
+			dev->lut[gpios++] = 1 << i;
+
+	if (gpios < 1) {
+		ret = -EINVAL;
+		goto err;
+	}
+
+	gc = &dev->gpio_chip;
+	gc->direction_input  = adp5520_gpio_direction_input;
+	gc->direction_output = adp5520_gpio_direction_output;
+	gc->get = adp5520_gpio_get_value;
+	gc->set = adp5520_gpio_set_value;
+	gc->can_sleep = true;
+
+	gc->base = pdata->gpio_start;
+	gc->ngpio = gpios;
+	gc->label = pdev->name;
+	gc->owner = THIS_MODULE;
+
+	ret = adp5520_clr_bits(dev->master, ADP5520_GPIO_CFG_1,
+		pdata->gpio_en_mask);
+
+	if (pdata->gpio_en_mask & ADP5520_GPIO_C3)
+		ctl_mask |= ADP5520_C3_MODE;
+
+	if (pdata->gpio_en_mask & ADP5520_GPIO_R3)
+		ctl_mask |= ADP5520_R3_MODE;
+
+	if (ctl_mask)
+		ret = adp5520_set_bits(dev->master, ADP5520_LED_CONTROL,
+			ctl_mask);
+
+	ret |= adp5520_set_bits(dev->master, ADP5520_GPIO_PULLUP,
+		pdata->gpio_pullup_mask);
+
+	if (ret) {
+		dev_err(&pdev->dev, "failed to write\n");
+		goto err;
+	}
+
+	ret = devm_gpiochip_add_data(&pdev->dev, &dev->gpio_chip, dev);
+	if (ret)
+		goto err;
+
+	platform_set_drvdata(pdev, dev);
+	return 0;
+
+err:
+	return ret;
+}
+
+static struct platform_driver adp5520_gpio_driver = {
+	.driver	= {
+		.name	= "adp5520-gpio",
+	},
+	.probe		= adp5520_gpio_probe,
+};
+
+module_platform_driver(adp5520_gpio_driver);
+
+MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
+MODULE_DESCRIPTION("GPIO ADP5520 Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:adp5520-gpio");
diff --git a/drivers/gpio/gpio-adp5588.c b/drivers/gpio/gpio-adp5588.c
new file mode 100644
index 000000000..f1e4ac90e
--- /dev/null
+++ b/drivers/gpio/gpio-adp5588.c
@@ -0,0 +1,471 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * GPIO Chip driver for Analog Devices
+ * ADP5588/ADP5587 I/O Expander and QWERTY Keypad Controller
+ *
+ * Copyright 2009-2010 Analog Devices Inc.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/gpio/driver.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/of_device.h>
+
+#include <linux/platform_data/adp5588.h>
+
+#define DRV_NAME	"adp5588-gpio"
+
+/*
+ * Early pre 4.0 Silicon required to delay readout by at least 25ms,
+ * since the Event Counter Register updated 25ms after the interrupt
+ * asserted.
+ */
+#define WA_DELAYED_READOUT_REVID(rev)	((rev) < 4)
+
+struct adp5588_gpio {
+	struct i2c_client *client;
+	struct gpio_chip gpio_chip;
+	struct mutex lock;	/* protect cached dir, dat_out */
+	/* protect serialized access to the interrupt controller bus */
+	struct mutex irq_lock;
+	uint8_t dat_out[3];
+	uint8_t dir[3];
+	uint8_t int_lvl_low[3];
+	uint8_t int_lvl_high[3];
+	uint8_t int_en[3];
+	uint8_t irq_mask[3];
+	uint8_t int_input_en[3];
+};
+
+static int adp5588_gpio_read(struct i2c_client *client, u8 reg)
+{
+	int ret = i2c_smbus_read_byte_data(client, reg);
+
+	if (ret < 0)
+		dev_err(&client->dev, "Read Error\n");
+
+	return ret;
+}
+
+static int adp5588_gpio_write(struct i2c_client *client, u8 reg, u8 val)
+{
+	int ret = i2c_smbus_write_byte_data(client, reg, val);
+
+	if (ret < 0)
+		dev_err(&client->dev, "Write Error\n");
+
+	return ret;
+}
+
+static int adp5588_gpio_get_value(struct gpio_chip *chip, unsigned off)
+{
+	struct adp5588_gpio *dev = gpiochip_get_data(chip);
+	unsigned bank = ADP5588_BANK(off);
+	unsigned bit = ADP5588_BIT(off);
+	int val;
+
+	mutex_lock(&dev->lock);
+
+	if (dev->dir[bank] & bit)
+		val = dev->dat_out[bank];
+	else
+		val = adp5588_gpio_read(dev->client, GPIO_DAT_STAT1 + bank);
+
+	mutex_unlock(&dev->lock);
+
+	return !!(val & bit);
+}
+
+static void adp5588_gpio_set_value(struct gpio_chip *chip,
+				   unsigned off, int val)
+{
+	unsigned bank, bit;
+	struct adp5588_gpio *dev = gpiochip_get_data(chip);
+
+	bank = ADP5588_BANK(off);
+	bit = ADP5588_BIT(off);
+
+	mutex_lock(&dev->lock);
+	if (val)
+		dev->dat_out[bank] |= bit;
+	else
+		dev->dat_out[bank] &= ~bit;
+
+	adp5588_gpio_write(dev->client, GPIO_DAT_OUT1 + bank,
+			   dev->dat_out[bank]);
+	mutex_unlock(&dev->lock);
+}
+
+static int adp5588_gpio_direction_input(struct gpio_chip *chip, unsigned off)
+{
+	int ret;
+	unsigned bank;
+	struct adp5588_gpio *dev = gpiochip_get_data(chip);
+
+	bank = ADP5588_BANK(off);
+
+	mutex_lock(&dev->lock);
+	dev->dir[bank] &= ~ADP5588_BIT(off);
+	ret = adp5588_gpio_write(dev->client, GPIO_DIR1 + bank, dev->dir[bank]);
+	mutex_unlock(&dev->lock);
+
+	return ret;
+}
+
+static int adp5588_gpio_direction_output(struct gpio_chip *chip,
+					 unsigned off, int val)
+{
+	int ret;
+	unsigned bank, bit;
+	struct adp5588_gpio *dev = gpiochip_get_data(chip);
+
+	bank = ADP5588_BANK(off);
+	bit = ADP5588_BIT(off);
+
+	mutex_lock(&dev->lock);
+	dev->dir[bank] |= bit;
+
+	if (val)
+		dev->dat_out[bank] |= bit;
+	else
+		dev->dat_out[bank] &= ~bit;
+
+	ret = adp5588_gpio_write(dev->client, GPIO_DAT_OUT1 + bank,
+				 dev->dat_out[bank]);
+	ret |= adp5588_gpio_write(dev->client, GPIO_DIR1 + bank,
+				 dev->dir[bank]);
+	mutex_unlock(&dev->lock);
+
+	return ret;
+}
+
+#ifdef CONFIG_GPIO_ADP5588_IRQ
+
+static void adp5588_irq_bus_lock(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct adp5588_gpio *dev = gpiochip_get_data(gc);
+
+	mutex_lock(&dev->irq_lock);
+}
+
+ /*
+  * genirq core code can issue chip->mask/unmask from atomic context.
+  * This doesn't work for slow busses where an access needs to sleep.
+  * bus_sync_unlock() is therefore called outside the atomic context,
+  * syncs the current irq mask state with the slow external controller
+  * and unlocks the bus.
+  */
+
+static void adp5588_irq_bus_sync_unlock(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct adp5588_gpio *dev = gpiochip_get_data(gc);
+	int i;
+
+	for (i = 0; i <= ADP5588_BANK(ADP5588_MAXGPIO); i++) {
+		if (dev->int_input_en[i]) {
+			mutex_lock(&dev->lock);
+			dev->dir[i] &= ~dev->int_input_en[i];
+			dev->int_input_en[i] = 0;
+			adp5588_gpio_write(dev->client, GPIO_DIR1 + i,
+					   dev->dir[i]);
+			mutex_unlock(&dev->lock);
+		}
+
+		if (dev->int_en[i] ^ dev->irq_mask[i]) {
+			dev->int_en[i] = dev->irq_mask[i];
+			adp5588_gpio_write(dev->client, GPI_EM1 + i,
+					   dev->int_en[i]);
+		}
+	}
+
+	mutex_unlock(&dev->irq_lock);
+}
+
+static void adp5588_irq_mask(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct adp5588_gpio *dev = gpiochip_get_data(gc);
+
+	dev->irq_mask[ADP5588_BANK(d->hwirq)] &= ~ADP5588_BIT(d->hwirq);
+}
+
+static void adp5588_irq_unmask(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct adp5588_gpio *dev = gpiochip_get_data(gc);
+
+	dev->irq_mask[ADP5588_BANK(d->hwirq)] |= ADP5588_BIT(d->hwirq);
+}
+
+static int adp5588_irq_set_type(struct irq_data *d, unsigned int type)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct adp5588_gpio *dev = gpiochip_get_data(gc);
+	uint16_t gpio = d->hwirq;
+	unsigned bank, bit;
+
+	bank = ADP5588_BANK(gpio);
+	bit = ADP5588_BIT(gpio);
+
+	dev->int_lvl_low[bank] &= ~bit;
+	dev->int_lvl_high[bank] &= ~bit;
+
+	if (type & IRQ_TYPE_EDGE_BOTH || type & IRQ_TYPE_LEVEL_HIGH)
+		dev->int_lvl_high[bank] |= bit;
+
+	if (type & IRQ_TYPE_EDGE_BOTH || type & IRQ_TYPE_LEVEL_LOW)
+		dev->int_lvl_low[bank] |= bit;
+
+	dev->int_input_en[bank] |= bit;
+
+	return 0;
+}
+
+static struct irq_chip adp5588_irq_chip = {
+	.name			= "adp5588",
+	.irq_mask		= adp5588_irq_mask,
+	.irq_unmask		= adp5588_irq_unmask,
+	.irq_bus_lock		= adp5588_irq_bus_lock,
+	.irq_bus_sync_unlock	= adp5588_irq_bus_sync_unlock,
+	.irq_set_type		= adp5588_irq_set_type,
+};
+
+static irqreturn_t adp5588_irq_handler(int irq, void *devid)
+{
+	struct adp5588_gpio *dev = devid;
+	int status = adp5588_gpio_read(dev->client, INT_STAT);
+
+	if (status & ADP5588_KE_INT) {
+		int ev_cnt = adp5588_gpio_read(dev->client, KEY_LCK_EC_STAT);
+
+		if (ev_cnt > 0) {
+			int i;
+
+			for (i = 0; i < (ev_cnt & ADP5588_KEC); i++) {
+				int key = adp5588_gpio_read(dev->client,
+							    Key_EVENTA + i);
+				/* GPIN events begin at 97,
+				 * bit 7 indicates logic level
+				 */
+				int gpio = (key & 0x7f) - 97;
+				int lvl = key & (1 << 7);
+				int bank = ADP5588_BANK(gpio);
+				int bit = ADP5588_BIT(gpio);
+
+				if ((lvl && dev->int_lvl_high[bank] & bit) ||
+				    (!lvl && dev->int_lvl_low[bank] & bit))
+					handle_nested_irq(irq_find_mapping(
+					      dev->gpio_chip.irq.domain, gpio));
+			}
+		}
+	}
+
+	adp5588_gpio_write(dev->client, INT_STAT, status); /* Status is W1C */
+
+	return IRQ_HANDLED;
+}
+
+
+static int adp5588_irq_init_hw(struct gpio_chip *gc)
+{
+	struct adp5588_gpio *dev = gpiochip_get_data(gc);
+	/* Enable IRQs after registering chip */
+	adp5588_gpio_write(dev->client, CFG,
+			   ADP5588_AUTO_INC | ADP5588_INT_CFG | ADP5588_KE_IEN);
+
+	return 0;
+}
+
+static int adp5588_irq_setup(struct adp5588_gpio *dev)
+{
+	struct i2c_client *client = dev->client;
+	int ret;
+	struct adp5588_gpio_platform_data *pdata =
+			dev_get_platdata(&client->dev);
+	struct gpio_irq_chip *girq;
+
+	adp5588_gpio_write(client, CFG, ADP5588_AUTO_INC);
+	adp5588_gpio_write(client, INT_STAT, -1); /* status is W1C */
+
+	mutex_init(&dev->irq_lock);
+
+	ret = devm_request_threaded_irq(&client->dev, client->irq,
+					NULL, adp5588_irq_handler, IRQF_ONESHOT
+					| IRQF_TRIGGER_FALLING | IRQF_SHARED,
+					dev_name(&client->dev), dev);
+	if (ret) {
+		dev_err(&client->dev, "failed to request irq %d\n",
+			client->irq);
+		return ret;
+	}
+
+	/* This will be registered in the call to devm_gpiochip_add_data() */
+	girq = &dev->gpio_chip.irq;
+	girq->chip = &adp5588_irq_chip;
+	/* This will let us handle the parent IRQ in the driver */
+	girq->parent_handler = NULL;
+	girq->num_parents = 0;
+	girq->parents = NULL;
+	girq->first = pdata ? pdata->irq_base : 0;
+	girq->default_type = IRQ_TYPE_NONE;
+	girq->handler = handle_simple_irq;
+	girq->init_hw = adp5588_irq_init_hw;
+	girq->threaded = true;
+
+	return 0;
+}
+
+#else
+static int adp5588_irq_setup(struct adp5588_gpio *dev)
+{
+	struct i2c_client *client = dev->client;
+	dev_warn(&client->dev, "interrupt support not compiled in\n");
+
+	return 0;
+}
+
+#endif /* CONFIG_GPIO_ADP5588_IRQ */
+
+static int adp5588_gpio_probe(struct i2c_client *client)
+{
+	struct adp5588_gpio_platform_data *pdata =
+			dev_get_platdata(&client->dev);
+	struct adp5588_gpio *dev;
+	struct gpio_chip *gc;
+	int ret, i, revid;
+	unsigned int pullup_dis_mask = 0;
+
+	if (!i2c_check_functionality(client->adapter,
+					I2C_FUNC_SMBUS_BYTE_DATA)) {
+		dev_err(&client->dev, "SMBUS Byte Data not Supported\n");
+		return -EIO;
+	}
+
+	dev = devm_kzalloc(&client->dev, sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		return -ENOMEM;
+
+	dev->client = client;
+
+	gc = &dev->gpio_chip;
+	gc->direction_input = adp5588_gpio_direction_input;
+	gc->direction_output = adp5588_gpio_direction_output;
+	gc->get = adp5588_gpio_get_value;
+	gc->set = adp5588_gpio_set_value;
+	gc->can_sleep = true;
+	gc->base = -1;
+	gc->parent = &client->dev;
+
+	if (pdata) {
+		gc->base = pdata->gpio_start;
+		gc->names = pdata->names;
+		pullup_dis_mask = pdata->pullup_dis_mask;
+	}
+
+	gc->ngpio = ADP5588_MAXGPIO;
+	gc->label = client->name;
+	gc->owner = THIS_MODULE;
+
+	mutex_init(&dev->lock);
+
+	ret = adp5588_gpio_read(dev->client, DEV_ID);
+	if (ret < 0)
+		return ret;
+
+	revid = ret & ADP5588_DEVICE_ID_MASK;
+
+	for (i = 0, ret = 0; i <= ADP5588_BANK(ADP5588_MAXGPIO); i++) {
+		dev->dat_out[i] = adp5588_gpio_read(client, GPIO_DAT_OUT1 + i);
+		dev->dir[i] = adp5588_gpio_read(client, GPIO_DIR1 + i);
+		ret |= adp5588_gpio_write(client, KP_GPIO1 + i, 0);
+		ret |= adp5588_gpio_write(client, GPIO_PULL1 + i,
+				(pullup_dis_mask >> (8 * i)) & 0xFF);
+		ret |= adp5588_gpio_write(client, GPIO_INT_EN1 + i, 0);
+		if (ret)
+			return ret;
+	}
+
+	if (client->irq) {
+		if (WA_DELAYED_READOUT_REVID(revid)) {
+			dev_warn(&client->dev, "GPIO int not supported\n");
+		} else {
+			ret = adp5588_irq_setup(dev);
+			if (ret)
+				return ret;
+		}
+	}
+
+	ret = devm_gpiochip_add_data(&client->dev, &dev->gpio_chip, dev);
+	if (ret)
+		return ret;
+
+	if (pdata && pdata->setup) {
+		ret = pdata->setup(client, gc->base, gc->ngpio, pdata->context);
+		if (ret < 0)
+			dev_warn(&client->dev, "setup failed, %d\n", ret);
+	}
+
+	i2c_set_clientdata(client, dev);
+
+	return 0;
+}
+
+static int adp5588_gpio_remove(struct i2c_client *client)
+{
+	struct adp5588_gpio_platform_data *pdata =
+			dev_get_platdata(&client->dev);
+	struct adp5588_gpio *dev = i2c_get_clientdata(client);
+	int ret;
+
+	if (pdata && pdata->teardown) {
+		ret = pdata->teardown(client,
+				      dev->gpio_chip.base, dev->gpio_chip.ngpio,
+				      pdata->context);
+		if (ret < 0) {
+			dev_err(&client->dev, "teardown failed %d\n", ret);
+			return ret;
+		}
+	}
+
+	if (dev->client->irq)
+		free_irq(dev->client->irq, dev);
+
+	return 0;
+}
+
+static const struct i2c_device_id adp5588_gpio_id[] = {
+	{DRV_NAME, 0},
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, adp5588_gpio_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id adp5588_gpio_of_id[] = {
+	{ .compatible = "adi," DRV_NAME, },
+	{},
+};
+MODULE_DEVICE_TABLE(of, adp5588_gpio_of_id);
+#endif
+
+static struct i2c_driver adp5588_gpio_driver = {
+	.driver = {
+		.name = DRV_NAME,
+		.of_match_table = of_match_ptr(adp5588_gpio_of_id),
+	},
+	.probe_new = adp5588_gpio_probe,
+	.remove = adp5588_gpio_remove,
+	.id_table = adp5588_gpio_id,
+};
+
+module_i2c_driver(adp5588_gpio_driver);
+
+MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
+MODULE_DESCRIPTION("GPIO ADP5588 Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/gpio-aggregator.c b/drivers/gpio/gpio-aggregator.c
new file mode 100644
index 000000000..d5f252464
--- /dev/null
+++ b/drivers/gpio/gpio-aggregator.c
@@ -0,0 +1,587 @@
+// SPDX-License-Identifier: GPL-2.0-only
+//
+// GPIO Aggregator
+//
+// Copyright (C) 2019-2020 Glider bv
+
+#define DRV_NAME       "gpio-aggregator"
+#define pr_fmt(fmt)	DRV_NAME ": " fmt
+
+#include <linux/bitmap.h>
+#include <linux/bitops.h>
+#include <linux/ctype.h>
+#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
+#include <linux/gpio/driver.h>
+#include <linux/gpio/machine.h>
+#include <linux/idr.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/overflow.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/string.h>
+
+
+/*
+ * GPIO Aggregator sysfs interface
+ */
+
+struct gpio_aggregator {
+	struct gpiod_lookup_table *lookups;
+	struct platform_device *pdev;
+	char args[];
+};
+
+static DEFINE_MUTEX(gpio_aggregator_lock);	/* protects idr */
+static DEFINE_IDR(gpio_aggregator_idr);
+
+static char *get_arg(char **args)
+{
+	char *start, *end;
+
+	start = skip_spaces(*args);
+	if (!*start)
+		return NULL;
+
+	if (*start == '"') {
+		/* Quoted arg */
+		end = strchr(++start, '"');
+		if (!end)
+			return ERR_PTR(-EINVAL);
+	} else {
+		/* Unquoted arg */
+		for (end = start; *end && !isspace(*end); end++) ;
+	}
+
+	if (*end)
+		*end++ = '\0';
+
+	*args = end;
+	return start;
+}
+
+static bool isrange(const char *s)
+{
+	size_t n;
+
+	if (IS_ERR_OR_NULL(s))
+		return false;
+
+	while (1) {
+		n = strspn(s, "0123456789");
+		if (!n)
+			return false;
+
+		s += n;
+
+		switch (*s++) {
+		case '\0':
+			return true;
+
+		case '-':
+		case ',':
+			break;
+
+		default:
+			return false;
+		}
+	}
+}
+
+static int aggr_add_gpio(struct gpio_aggregator *aggr, const char *key,
+			 int hwnum, unsigned int *n)
+{
+	struct gpiod_lookup_table *lookups;
+
+	lookups = krealloc(aggr->lookups, struct_size(lookups, table, *n + 2),
+			   GFP_KERNEL);
+	if (!lookups)
+		return -ENOMEM;
+
+	lookups->table[*n] =
+		(struct gpiod_lookup)GPIO_LOOKUP_IDX(key, hwnum, NULL, *n, 0);
+
+	(*n)++;
+	memset(&lookups->table[*n], 0, sizeof(lookups->table[*n]));
+
+	aggr->lookups = lookups;
+	return 0;
+}
+
+static int aggr_parse(struct gpio_aggregator *aggr)
+{
+	char *args = aggr->args;
+	unsigned long *bitmap;
+	unsigned int i, n = 0;
+	char *name, *offsets;
+	int error = 0;
+
+	bitmap = bitmap_alloc(ARCH_NR_GPIOS, GFP_KERNEL);
+	if (!bitmap)
+		return -ENOMEM;
+
+	for (name = get_arg(&args), offsets = get_arg(&args); name;
+	     offsets = get_arg(&args)) {
+		if (IS_ERR(name)) {
+			pr_err("Cannot get GPIO specifier: %pe\n", name);
+			error = PTR_ERR(name);
+			goto free_bitmap;
+		}
+
+		if (!isrange(offsets)) {
+			/* Named GPIO line */
+			error = aggr_add_gpio(aggr, name, U16_MAX, &n);
+			if (error)
+				goto free_bitmap;
+
+			name = offsets;
+			continue;
+		}
+
+		/* GPIO chip + offset(s) */
+		error = bitmap_parselist(offsets, bitmap, ARCH_NR_GPIOS);
+		if (error) {
+			pr_err("Cannot parse %s: %d\n", offsets, error);
+			goto free_bitmap;
+		}
+
+		for_each_set_bit(i, bitmap, ARCH_NR_GPIOS) {
+			error = aggr_add_gpio(aggr, name, i, &n);
+			if (error)
+				goto free_bitmap;
+		}
+
+		name = get_arg(&args);
+	}
+
+	if (!n) {
+		pr_err("No GPIOs specified\n");
+		error = -EINVAL;
+	}
+
+free_bitmap:
+	bitmap_free(bitmap);
+	return error;
+}
+
+static ssize_t new_device_store(struct device_driver *driver, const char *buf,
+				size_t count)
+{
+	struct gpio_aggregator *aggr;
+	struct platform_device *pdev;
+	int res, id;
+
+	/* kernfs guarantees string termination, so count + 1 is safe */
+	aggr = kzalloc(sizeof(*aggr) + count + 1, GFP_KERNEL);
+	if (!aggr)
+		return -ENOMEM;
+
+	memcpy(aggr->args, buf, count + 1);
+
+	aggr->lookups = kzalloc(struct_size(aggr->lookups, table, 1),
+				GFP_KERNEL);
+	if (!aggr->lookups) {
+		res = -ENOMEM;
+		goto free_ga;
+	}
+
+	mutex_lock(&gpio_aggregator_lock);
+	id = idr_alloc(&gpio_aggregator_idr, aggr, 0, 0, GFP_KERNEL);
+	mutex_unlock(&gpio_aggregator_lock);
+
+	if (id < 0) {
+		res = id;
+		goto free_table;
+	}
+
+	aggr->lookups->dev_id = kasprintf(GFP_KERNEL, "%s.%d", DRV_NAME, id);
+	if (!aggr->lookups->dev_id) {
+		res = -ENOMEM;
+		goto remove_idr;
+	}
+
+	res = aggr_parse(aggr);
+	if (res)
+		goto free_dev_id;
+
+	gpiod_add_lookup_table(aggr->lookups);
+
+	pdev = platform_device_register_simple(DRV_NAME, id, NULL, 0);
+	if (IS_ERR(pdev)) {
+		res = PTR_ERR(pdev);
+		goto remove_table;
+	}
+
+	aggr->pdev = pdev;
+	return count;
+
+remove_table:
+	gpiod_remove_lookup_table(aggr->lookups);
+free_dev_id:
+	kfree(aggr->lookups->dev_id);
+remove_idr:
+	mutex_lock(&gpio_aggregator_lock);
+	idr_remove(&gpio_aggregator_idr, id);
+	mutex_unlock(&gpio_aggregator_lock);
+free_table:
+	kfree(aggr->lookups);
+free_ga:
+	kfree(aggr);
+	return res;
+}
+
+static DRIVER_ATTR_WO(new_device);
+
+static void gpio_aggregator_free(struct gpio_aggregator *aggr)
+{
+	platform_device_unregister(aggr->pdev);
+	gpiod_remove_lookup_table(aggr->lookups);
+	kfree(aggr->lookups->dev_id);
+	kfree(aggr->lookups);
+	kfree(aggr);
+}
+
+static ssize_t delete_device_store(struct device_driver *driver,
+				   const char *buf, size_t count)
+{
+	struct gpio_aggregator *aggr;
+	unsigned int id;
+	int error;
+
+	if (!str_has_prefix(buf, DRV_NAME "."))
+		return -EINVAL;
+
+	error = kstrtouint(buf + strlen(DRV_NAME "."), 10, &id);
+	if (error)
+		return error;
+
+	mutex_lock(&gpio_aggregator_lock);
+	aggr = idr_remove(&gpio_aggregator_idr, id);
+	mutex_unlock(&gpio_aggregator_lock);
+	if (!aggr)
+		return -ENOENT;
+
+	gpio_aggregator_free(aggr);
+	return count;
+}
+static DRIVER_ATTR_WO(delete_device);
+
+static struct attribute *gpio_aggregator_attrs[] = {
+	&driver_attr_new_device.attr,
+	&driver_attr_delete_device.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(gpio_aggregator);
+
+static int __exit gpio_aggregator_idr_remove(int id, void *p, void *data)
+{
+	gpio_aggregator_free(p);
+	return 0;
+}
+
+static void __exit gpio_aggregator_remove_all(void)
+{
+	mutex_lock(&gpio_aggregator_lock);
+	idr_for_each(&gpio_aggregator_idr, gpio_aggregator_idr_remove, NULL);
+	idr_destroy(&gpio_aggregator_idr);
+	mutex_unlock(&gpio_aggregator_lock);
+}
+
+
+/*
+ *  GPIO Forwarder
+ */
+
+struct gpiochip_fwd {
+	struct gpio_chip chip;
+	struct gpio_desc **descs;
+	union {
+		struct mutex mlock;	/* protects tmp[] if can_sleep */
+		spinlock_t slock;	/* protects tmp[] if !can_sleep */
+	};
+	unsigned long tmp[];		/* values and descs for multiple ops */
+};
+
+static int gpio_fwd_get_direction(struct gpio_chip *chip, unsigned int offset)
+{
+	struct gpiochip_fwd *fwd = gpiochip_get_data(chip);
+
+	return gpiod_get_direction(fwd->descs[offset]);
+}
+
+static int gpio_fwd_direction_input(struct gpio_chip *chip, unsigned int offset)
+{
+	struct gpiochip_fwd *fwd = gpiochip_get_data(chip);
+
+	return gpiod_direction_input(fwd->descs[offset]);
+}
+
+static int gpio_fwd_direction_output(struct gpio_chip *chip,
+				     unsigned int offset, int value)
+{
+	struct gpiochip_fwd *fwd = gpiochip_get_data(chip);
+
+	return gpiod_direction_output(fwd->descs[offset], value);
+}
+
+static int gpio_fwd_get(struct gpio_chip *chip, unsigned int offset)
+{
+	struct gpiochip_fwd *fwd = gpiochip_get_data(chip);
+
+	return chip->can_sleep ? gpiod_get_value_cansleep(fwd->descs[offset])
+			       : gpiod_get_value(fwd->descs[offset]);
+}
+
+static int gpio_fwd_get_multiple(struct gpiochip_fwd *fwd, unsigned long *mask,
+				 unsigned long *bits)
+{
+	struct gpio_desc **descs;
+	unsigned long *values;
+	unsigned int i, j = 0;
+	int error;
+
+	/* Both values bitmap and desc pointers are stored in tmp[] */
+	values = &fwd->tmp[0];
+	descs = (void *)&fwd->tmp[BITS_TO_LONGS(fwd->chip.ngpio)];
+
+	bitmap_clear(values, 0, fwd->chip.ngpio);
+	for_each_set_bit(i, mask, fwd->chip.ngpio)
+		descs[j++] = fwd->descs[i];
+
+	if (fwd->chip.can_sleep)
+		error = gpiod_get_array_value_cansleep(j, descs, NULL, values);
+	else
+		error = gpiod_get_array_value(j, descs, NULL, values);
+	if (error)
+		return error;
+
+	j = 0;
+	for_each_set_bit(i, mask, fwd->chip.ngpio)
+		__assign_bit(i, bits, test_bit(j++, values));
+
+	return 0;
+}
+
+static int gpio_fwd_get_multiple_locked(struct gpio_chip *chip,
+					unsigned long *mask, unsigned long *bits)
+{
+	struct gpiochip_fwd *fwd = gpiochip_get_data(chip);
+	unsigned long flags;
+	int error;
+
+	if (chip->can_sleep) {
+		mutex_lock(&fwd->mlock);
+		error = gpio_fwd_get_multiple(fwd, mask, bits);
+		mutex_unlock(&fwd->mlock);
+	} else {
+		spin_lock_irqsave(&fwd->slock, flags);
+		error = gpio_fwd_get_multiple(fwd, mask, bits);
+		spin_unlock_irqrestore(&fwd->slock, flags);
+	}
+
+	return error;
+}
+
+static void gpio_fwd_set(struct gpio_chip *chip, unsigned int offset, int value)
+{
+	struct gpiochip_fwd *fwd = gpiochip_get_data(chip);
+
+	if (chip->can_sleep)
+		gpiod_set_value_cansleep(fwd->descs[offset], value);
+	else
+		gpiod_set_value(fwd->descs[offset], value);
+}
+
+static void gpio_fwd_set_multiple(struct gpiochip_fwd *fwd, unsigned long *mask,
+				  unsigned long *bits)
+{
+	struct gpio_desc **descs;
+	unsigned long *values;
+	unsigned int i, j = 0;
+
+	/* Both values bitmap and desc pointers are stored in tmp[] */
+	values = &fwd->tmp[0];
+	descs = (void *)&fwd->tmp[BITS_TO_LONGS(fwd->chip.ngpio)];
+
+	for_each_set_bit(i, mask, fwd->chip.ngpio) {
+		__assign_bit(j, values, test_bit(i, bits));
+		descs[j++] = fwd->descs[i];
+	}
+
+	if (fwd->chip.can_sleep)
+		gpiod_set_array_value_cansleep(j, descs, NULL, values);
+	else
+		gpiod_set_array_value(j, descs, NULL, values);
+}
+
+static void gpio_fwd_set_multiple_locked(struct gpio_chip *chip,
+					 unsigned long *mask, unsigned long *bits)
+{
+	struct gpiochip_fwd *fwd = gpiochip_get_data(chip);
+	unsigned long flags;
+
+	if (chip->can_sleep) {
+		mutex_lock(&fwd->mlock);
+		gpio_fwd_set_multiple(fwd, mask, bits);
+		mutex_unlock(&fwd->mlock);
+	} else {
+		spin_lock_irqsave(&fwd->slock, flags);
+		gpio_fwd_set_multiple(fwd, mask, bits);
+		spin_unlock_irqrestore(&fwd->slock, flags);
+	}
+}
+
+static int gpio_fwd_set_config(struct gpio_chip *chip, unsigned int offset,
+			       unsigned long config)
+{
+	struct gpiochip_fwd *fwd = gpiochip_get_data(chip);
+
+	return gpiod_set_config(fwd->descs[offset], config);
+}
+
+/**
+ * gpiochip_fwd_create() - Create a new GPIO forwarder
+ * @dev: Parent device pointer
+ * @ngpios: Number of GPIOs in the forwarder.
+ * @descs: Array containing the GPIO descriptors to forward to.
+ *         This array must contain @ngpios entries, and must not be deallocated
+ *         before the forwarder has been destroyed again.
+ *
+ * This function creates a new gpiochip, which forwards all GPIO operations to
+ * the passed GPIO descriptors.
+ *
+ * Return: An opaque object pointer, or an ERR_PTR()-encoded negative error
+ *         code on failure.
+ */
+static struct gpiochip_fwd *gpiochip_fwd_create(struct device *dev,
+						unsigned int ngpios,
+						struct gpio_desc *descs[])
+{
+	const char *label = dev_name(dev);
+	struct gpiochip_fwd *fwd;
+	struct gpio_chip *chip;
+	unsigned int i;
+	int error;
+
+	fwd = devm_kzalloc(dev, struct_size(fwd, tmp,
+			   BITS_TO_LONGS(ngpios) + ngpios), GFP_KERNEL);
+	if (!fwd)
+		return ERR_PTR(-ENOMEM);
+
+	chip = &fwd->chip;
+
+	/*
+	 * If any of the GPIO lines are sleeping, then the entire forwarder
+	 * will be sleeping.
+	 * If any of the chips support .set_config(), then the forwarder will
+	 * support setting configs.
+	 */
+	for (i = 0; i < ngpios; i++) {
+		struct gpio_chip *parent = gpiod_to_chip(descs[i]);
+
+		dev_dbg(dev, "%u => gpio-%d\n", i, desc_to_gpio(descs[i]));
+
+		if (gpiod_cansleep(descs[i]))
+			chip->can_sleep = true;
+		if (parent && parent->set_config)
+			chip->set_config = gpio_fwd_set_config;
+	}
+
+	chip->label = label;
+	chip->parent = dev;
+	chip->owner = THIS_MODULE;
+	chip->get_direction = gpio_fwd_get_direction;
+	chip->direction_input = gpio_fwd_direction_input;
+	chip->direction_output = gpio_fwd_direction_output;
+	chip->get = gpio_fwd_get;
+	chip->get_multiple = gpio_fwd_get_multiple_locked;
+	chip->set = gpio_fwd_set;
+	chip->set_multiple = gpio_fwd_set_multiple_locked;
+	chip->base = -1;
+	chip->ngpio = ngpios;
+	fwd->descs = descs;
+
+	if (chip->can_sleep)
+		mutex_init(&fwd->mlock);
+	else
+		spin_lock_init(&fwd->slock);
+
+	error = devm_gpiochip_add_data(dev, chip, fwd);
+	if (error)
+		return ERR_PTR(error);
+
+	return fwd;
+}
+
+
+/*
+ *  GPIO Aggregator platform device
+ */
+
+static int gpio_aggregator_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct gpio_desc **descs;
+	struct gpiochip_fwd *fwd;
+	int i, n;
+
+	n = gpiod_count(dev, NULL);
+	if (n < 0)
+		return n;
+
+	descs = devm_kmalloc_array(dev, n, sizeof(*descs), GFP_KERNEL);
+	if (!descs)
+		return -ENOMEM;
+
+	for (i = 0; i < n; i++) {
+		descs[i] = devm_gpiod_get_index(dev, NULL, i, GPIOD_ASIS);
+		if (IS_ERR(descs[i]))
+			return PTR_ERR(descs[i]);
+	}
+
+	fwd = gpiochip_fwd_create(dev, n, descs);
+	if (IS_ERR(fwd))
+		return PTR_ERR(fwd);
+
+	platform_set_drvdata(pdev, fwd);
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id gpio_aggregator_dt_ids[] = {
+	/*
+	 * Add GPIO-operated devices controlled from userspace below,
+	 * or use "driver_override" in sysfs
+	 */
+	{},
+};
+MODULE_DEVICE_TABLE(of, gpio_aggregator_dt_ids);
+#endif
+
+static struct platform_driver gpio_aggregator_driver = {
+	.probe = gpio_aggregator_probe,
+	.driver = {
+		.name = DRV_NAME,
+		.groups = gpio_aggregator_groups,
+		.of_match_table = of_match_ptr(gpio_aggregator_dt_ids),
+	},
+};
+
+static int __init gpio_aggregator_init(void)
+{
+	return platform_driver_register(&gpio_aggregator_driver);
+}
+module_init(gpio_aggregator_init);
+
+static void __exit gpio_aggregator_exit(void)
+{
+	gpio_aggregator_remove_all();
+	platform_driver_unregister(&gpio_aggregator_driver);
+}
+module_exit(gpio_aggregator_exit);
+
+MODULE_AUTHOR("Geert Uytterhoeven <geert+renesas@glider.be>");
+MODULE_DESCRIPTION("GPIO Aggregator");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-altera-a10sr.c b/drivers/gpio/gpio-altera-a10sr.c
new file mode 100644
index 000000000..b5917c48e
--- /dev/null
+++ b/drivers/gpio/gpio-altera-a10sr.c
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Copyright Intel Corporation (C) 2014-2016. All Rights Reserved
+ *
+ * GPIO driver for  Altera Arria10 MAX5 System Resource Chip
+ *
+ * Adapted from gpio-tps65910.c
+ */
+
+#include <linux/gpio/driver.h>
+#include <linux/mfd/altera-a10sr.h>
+#include <linux/module.h>
+
+/**
+ * struct altr_a10sr_gpio - Altera Max5 GPIO device private data structure
+ * @gp:   : instance of the gpio_chip
+ * @regmap: the regmap from the parent device.
+ */
+struct altr_a10sr_gpio {
+	struct gpio_chip gp;
+	struct regmap *regmap;
+};
+
+static int altr_a10sr_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+	struct altr_a10sr_gpio *gpio = gpiochip_get_data(chip);
+	int ret, val;
+
+	ret = regmap_read(gpio->regmap, ALTR_A10SR_PBDSW_REG, &val);
+	if (ret < 0)
+		return ret;
+
+	return !!(val & BIT(offset - ALTR_A10SR_LED_VALID_SHIFT));
+}
+
+static void altr_a10sr_gpio_set(struct gpio_chip *chip, unsigned int offset,
+				int value)
+{
+	struct altr_a10sr_gpio *gpio = gpiochip_get_data(chip);
+
+	regmap_update_bits(gpio->regmap, ALTR_A10SR_LED_REG,
+			   BIT(ALTR_A10SR_LED_VALID_SHIFT + offset),
+			   value ? BIT(ALTR_A10SR_LED_VALID_SHIFT + offset)
+			   : 0);
+}
+
+static int altr_a10sr_gpio_direction_input(struct gpio_chip *gc,
+					   unsigned int nr)
+{
+	if (nr < (ALTR_A10SR_IN_VALID_RANGE_LO - ALTR_A10SR_LED_VALID_SHIFT))
+		return -EINVAL;
+
+	return 0;
+}
+
+static int altr_a10sr_gpio_direction_output(struct gpio_chip *gc,
+					    unsigned int nr, int value)
+{
+	if (nr > (ALTR_A10SR_OUT_VALID_RANGE_HI - ALTR_A10SR_LED_VALID_SHIFT))
+		return -EINVAL;
+
+	altr_a10sr_gpio_set(gc, nr, value);
+	return 0;
+}
+
+static const struct gpio_chip altr_a10sr_gc = {
+	.label = "altr_a10sr_gpio",
+	.owner = THIS_MODULE,
+	.get = altr_a10sr_gpio_get,
+	.set = altr_a10sr_gpio_set,
+	.direction_input = altr_a10sr_gpio_direction_input,
+	.direction_output = altr_a10sr_gpio_direction_output,
+	.can_sleep = true,
+	.ngpio = 12,
+	.base = -1,
+};
+
+static int altr_a10sr_gpio_probe(struct platform_device *pdev)
+{
+	struct altr_a10sr_gpio *gpio;
+	int ret;
+	struct altr_a10sr *a10sr = dev_get_drvdata(pdev->dev.parent);
+
+	gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
+	if (!gpio)
+		return -ENOMEM;
+
+	gpio->regmap = a10sr->regmap;
+
+	gpio->gp = altr_a10sr_gc;
+	gpio->gp.parent = pdev->dev.parent;
+	gpio->gp.of_node = pdev->dev.of_node;
+
+	ret = devm_gpiochip_add_data(&pdev->dev, &gpio->gp, gpio);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, gpio);
+
+	return 0;
+}
+
+static const struct of_device_id altr_a10sr_gpio_of_match[] = {
+	{ .compatible = "altr,a10sr-gpio" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, altr_a10sr_gpio_of_match);
+
+static struct platform_driver altr_a10sr_gpio_driver = {
+	.probe = altr_a10sr_gpio_probe,
+	.driver = {
+		.name	= "altr_a10sr_gpio",
+		.of_match_table = of_match_ptr(altr_a10sr_gpio_of_match),
+	},
+};
+module_platform_driver(altr_a10sr_gpio_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Thor Thayer <tthayer@opensource.altera.com>");
+MODULE_DESCRIPTION("Altera Arria10 System Resource Chip GPIO");
diff --git a/drivers/gpio/gpio-altera.c b/drivers/gpio/gpio-altera.c
new file mode 100644
index 000000000..b7932ecc3
--- /dev/null
+++ b/drivers/gpio/gpio-altera.c
@@ -0,0 +1,354 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2013 Altera Corporation
+ * Based on gpio-mpc8xxx.c
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/gpio/driver.h>
+#include <linux/of_gpio.h> /* For of_mm_gpio_chip */
+#include <linux/platform_device.h>
+
+#define ALTERA_GPIO_MAX_NGPIO		32
+#define ALTERA_GPIO_DATA		0x0
+#define ALTERA_GPIO_DIR			0x4
+#define ALTERA_GPIO_IRQ_MASK		0x8
+#define ALTERA_GPIO_EDGE_CAP		0xc
+
+/**
+* struct altera_gpio_chip
+* @mmchip		: memory mapped chip structure.
+* @gpio_lock		: synchronization lock so that new irq/set/get requests
+*			  will be blocked until the current one completes.
+* @interrupt_trigger	: specifies the hardware configured IRQ trigger type
+*			  (rising, falling, both, high)
+* @mapped_irq		: kernel mapped irq number.
+* @irq_chip		: IRQ chip configuration
+*/
+struct altera_gpio_chip {
+	struct of_mm_gpio_chip mmchip;
+	raw_spinlock_t gpio_lock;
+	int interrupt_trigger;
+	int mapped_irq;
+	struct irq_chip irq_chip;
+};
+
+static void altera_gpio_irq_unmask(struct irq_data *d)
+{
+	struct altera_gpio_chip *altera_gc;
+	struct of_mm_gpio_chip *mm_gc;
+	unsigned long flags;
+	u32 intmask;
+
+	altera_gc = gpiochip_get_data(irq_data_get_irq_chip_data(d));
+	mm_gc = &altera_gc->mmchip;
+
+	raw_spin_lock_irqsave(&altera_gc->gpio_lock, flags);
+	intmask = readl(mm_gc->regs + ALTERA_GPIO_IRQ_MASK);
+	/* Set ALTERA_GPIO_IRQ_MASK bit to unmask */
+	intmask |= BIT(irqd_to_hwirq(d));
+	writel(intmask, mm_gc->regs + ALTERA_GPIO_IRQ_MASK);
+	raw_spin_unlock_irqrestore(&altera_gc->gpio_lock, flags);
+}
+
+static void altera_gpio_irq_mask(struct irq_data *d)
+{
+	struct altera_gpio_chip *altera_gc;
+	struct of_mm_gpio_chip *mm_gc;
+	unsigned long flags;
+	u32 intmask;
+
+	altera_gc = gpiochip_get_data(irq_data_get_irq_chip_data(d));
+	mm_gc = &altera_gc->mmchip;
+
+	raw_spin_lock_irqsave(&altera_gc->gpio_lock, flags);
+	intmask = readl(mm_gc->regs + ALTERA_GPIO_IRQ_MASK);
+	/* Clear ALTERA_GPIO_IRQ_MASK bit to mask */
+	intmask &= ~BIT(irqd_to_hwirq(d));
+	writel(intmask, mm_gc->regs + ALTERA_GPIO_IRQ_MASK);
+	raw_spin_unlock_irqrestore(&altera_gc->gpio_lock, flags);
+}
+
+/*
+ * This controller's IRQ type is synthesized in hardware, so this function
+ * just checks if the requested set_type matches the synthesized IRQ type
+ */
+static int altera_gpio_irq_set_type(struct irq_data *d,
+				   unsigned int type)
+{
+	struct altera_gpio_chip *altera_gc;
+
+	altera_gc = gpiochip_get_data(irq_data_get_irq_chip_data(d));
+
+	if (type == IRQ_TYPE_NONE) {
+		irq_set_handler_locked(d, handle_bad_irq);
+		return 0;
+	}
+	if (type == altera_gc->interrupt_trigger) {
+		if (type == IRQ_TYPE_LEVEL_HIGH)
+			irq_set_handler_locked(d, handle_level_irq);
+		else
+			irq_set_handler_locked(d, handle_simple_irq);
+		return 0;
+	}
+	irq_set_handler_locked(d, handle_bad_irq);
+	return -EINVAL;
+}
+
+static unsigned int altera_gpio_irq_startup(struct irq_data *d)
+{
+	altera_gpio_irq_unmask(d);
+
+	return 0;
+}
+
+static int altera_gpio_get(struct gpio_chip *gc, unsigned offset)
+{
+	struct of_mm_gpio_chip *mm_gc;
+
+	mm_gc = to_of_mm_gpio_chip(gc);
+
+	return !!(readl(mm_gc->regs + ALTERA_GPIO_DATA) & BIT(offset));
+}
+
+static void altera_gpio_set(struct gpio_chip *gc, unsigned offset, int value)
+{
+	struct of_mm_gpio_chip *mm_gc;
+	struct altera_gpio_chip *chip;
+	unsigned long flags;
+	unsigned int data_reg;
+
+	mm_gc = to_of_mm_gpio_chip(gc);
+	chip = gpiochip_get_data(gc);
+
+	raw_spin_lock_irqsave(&chip->gpio_lock, flags);
+	data_reg = readl(mm_gc->regs + ALTERA_GPIO_DATA);
+	if (value)
+		data_reg |= BIT(offset);
+	else
+		data_reg &= ~BIT(offset);
+	writel(data_reg, mm_gc->regs + ALTERA_GPIO_DATA);
+	raw_spin_unlock_irqrestore(&chip->gpio_lock, flags);
+}
+
+static int altera_gpio_direction_input(struct gpio_chip *gc, unsigned offset)
+{
+	struct of_mm_gpio_chip *mm_gc;
+	struct altera_gpio_chip *chip;
+	unsigned long flags;
+	unsigned int gpio_ddr;
+
+	mm_gc = to_of_mm_gpio_chip(gc);
+	chip = gpiochip_get_data(gc);
+
+	raw_spin_lock_irqsave(&chip->gpio_lock, flags);
+	/* Set pin as input, assumes software controlled IP */
+	gpio_ddr = readl(mm_gc->regs + ALTERA_GPIO_DIR);
+	gpio_ddr &= ~BIT(offset);
+	writel(gpio_ddr, mm_gc->regs + ALTERA_GPIO_DIR);
+	raw_spin_unlock_irqrestore(&chip->gpio_lock, flags);
+
+	return 0;
+}
+
+static int altera_gpio_direction_output(struct gpio_chip *gc,
+		unsigned offset, int value)
+{
+	struct of_mm_gpio_chip *mm_gc;
+	struct altera_gpio_chip *chip;
+	unsigned long flags;
+	unsigned int data_reg, gpio_ddr;
+
+	mm_gc = to_of_mm_gpio_chip(gc);
+	chip = gpiochip_get_data(gc);
+
+	raw_spin_lock_irqsave(&chip->gpio_lock, flags);
+	/* Sets the GPIO value */
+	data_reg = readl(mm_gc->regs + ALTERA_GPIO_DATA);
+	if (value)
+		data_reg |= BIT(offset);
+	else
+		data_reg &= ~BIT(offset);
+	writel(data_reg, mm_gc->regs + ALTERA_GPIO_DATA);
+
+	/* Set pin as output, assumes software controlled IP */
+	gpio_ddr = readl(mm_gc->regs + ALTERA_GPIO_DIR);
+	gpio_ddr |= BIT(offset);
+	writel(gpio_ddr, mm_gc->regs + ALTERA_GPIO_DIR);
+	raw_spin_unlock_irqrestore(&chip->gpio_lock, flags);
+
+	return 0;
+}
+
+static void altera_gpio_irq_edge_handler(struct irq_desc *desc)
+{
+	struct altera_gpio_chip *altera_gc;
+	struct irq_chip *chip;
+	struct of_mm_gpio_chip *mm_gc;
+	struct irq_domain *irqdomain;
+	unsigned long status;
+	int i;
+
+	altera_gc = gpiochip_get_data(irq_desc_get_handler_data(desc));
+	chip = irq_desc_get_chip(desc);
+	mm_gc = &altera_gc->mmchip;
+	irqdomain = altera_gc->mmchip.gc.irq.domain;
+
+	chained_irq_enter(chip, desc);
+
+	while ((status =
+	      (readl(mm_gc->regs + ALTERA_GPIO_EDGE_CAP) &
+	      readl(mm_gc->regs + ALTERA_GPIO_IRQ_MASK)))) {
+		writel(status, mm_gc->regs + ALTERA_GPIO_EDGE_CAP);
+		for_each_set_bit(i, &status, mm_gc->gc.ngpio) {
+			generic_handle_irq(irq_find_mapping(irqdomain, i));
+		}
+	}
+
+	chained_irq_exit(chip, desc);
+}
+
+static void altera_gpio_irq_leveL_high_handler(struct irq_desc *desc)
+{
+	struct altera_gpio_chip *altera_gc;
+	struct irq_chip *chip;
+	struct of_mm_gpio_chip *mm_gc;
+	struct irq_domain *irqdomain;
+	unsigned long status;
+	int i;
+
+	altera_gc = gpiochip_get_data(irq_desc_get_handler_data(desc));
+	chip = irq_desc_get_chip(desc);
+	mm_gc = &altera_gc->mmchip;
+	irqdomain = altera_gc->mmchip.gc.irq.domain;
+
+	chained_irq_enter(chip, desc);
+
+	status = readl(mm_gc->regs + ALTERA_GPIO_DATA);
+	status &= readl(mm_gc->regs + ALTERA_GPIO_IRQ_MASK);
+
+	for_each_set_bit(i, &status, mm_gc->gc.ngpio) {
+		generic_handle_irq(irq_find_mapping(irqdomain, i));
+	}
+	chained_irq_exit(chip, desc);
+}
+
+static int altera_gpio_probe(struct platform_device *pdev)
+{
+	struct device_node *node = pdev->dev.of_node;
+	int reg, ret;
+	struct altera_gpio_chip *altera_gc;
+	struct gpio_irq_chip *girq;
+
+	altera_gc = devm_kzalloc(&pdev->dev, sizeof(*altera_gc), GFP_KERNEL);
+	if (!altera_gc)
+		return -ENOMEM;
+
+	raw_spin_lock_init(&altera_gc->gpio_lock);
+
+	if (of_property_read_u32(node, "altr,ngpio", &reg))
+		/* By default assume maximum ngpio */
+		altera_gc->mmchip.gc.ngpio = ALTERA_GPIO_MAX_NGPIO;
+	else
+		altera_gc->mmchip.gc.ngpio = reg;
+
+	if (altera_gc->mmchip.gc.ngpio > ALTERA_GPIO_MAX_NGPIO) {
+		dev_warn(&pdev->dev,
+			"ngpio is greater than %d, defaulting to %d\n",
+			ALTERA_GPIO_MAX_NGPIO, ALTERA_GPIO_MAX_NGPIO);
+		altera_gc->mmchip.gc.ngpio = ALTERA_GPIO_MAX_NGPIO;
+	}
+
+	altera_gc->mmchip.gc.direction_input	= altera_gpio_direction_input;
+	altera_gc->mmchip.gc.direction_output	= altera_gpio_direction_output;
+	altera_gc->mmchip.gc.get		= altera_gpio_get;
+	altera_gc->mmchip.gc.set		= altera_gpio_set;
+	altera_gc->mmchip.gc.owner		= THIS_MODULE;
+	altera_gc->mmchip.gc.parent		= &pdev->dev;
+
+	altera_gc->mapped_irq = platform_get_irq_optional(pdev, 0);
+
+	if (altera_gc->mapped_irq < 0)
+		goto skip_irq;
+
+	if (of_property_read_u32(node, "altr,interrupt-type", &reg)) {
+		dev_err(&pdev->dev,
+			"altr,interrupt-type value not set in device tree\n");
+		return -EINVAL;
+	}
+	altera_gc->interrupt_trigger = reg;
+
+	altera_gc->irq_chip.name = "altera-gpio";
+	altera_gc->irq_chip.irq_mask     = altera_gpio_irq_mask;
+	altera_gc->irq_chip.irq_unmask   = altera_gpio_irq_unmask;
+	altera_gc->irq_chip.irq_set_type = altera_gpio_irq_set_type;
+	altera_gc->irq_chip.irq_startup  = altera_gpio_irq_startup;
+	altera_gc->irq_chip.irq_shutdown = altera_gpio_irq_mask;
+
+	girq = &altera_gc->mmchip.gc.irq;
+	girq->chip = &altera_gc->irq_chip;
+	if (altera_gc->interrupt_trigger == IRQ_TYPE_LEVEL_HIGH)
+		girq->parent_handler = altera_gpio_irq_leveL_high_handler;
+	else
+		girq->parent_handler = altera_gpio_irq_edge_handler;
+	girq->num_parents = 1;
+	girq->parents = devm_kcalloc(&pdev->dev, 1, sizeof(*girq->parents),
+				     GFP_KERNEL);
+	if (!girq->parents)
+		return -ENOMEM;
+	girq->default_type = IRQ_TYPE_NONE;
+	girq->handler = handle_bad_irq;
+	girq->parents[0] = altera_gc->mapped_irq;
+
+skip_irq:
+	ret = of_mm_gpiochip_add_data(node, &altera_gc->mmchip, altera_gc);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed adding memory mapped gpiochip\n");
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, altera_gc);
+
+	return 0;
+}
+
+static int altera_gpio_remove(struct platform_device *pdev)
+{
+	struct altera_gpio_chip *altera_gc = platform_get_drvdata(pdev);
+
+	of_mm_gpiochip_remove(&altera_gc->mmchip);
+
+	return 0;
+}
+
+static const struct of_device_id altera_gpio_of_match[] = {
+	{ .compatible = "altr,pio-1.0", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, altera_gpio_of_match);
+
+static struct platform_driver altera_gpio_driver = {
+	.driver = {
+		.name	= "altera_gpio",
+		.of_match_table = of_match_ptr(altera_gpio_of_match),
+	},
+	.probe		= altera_gpio_probe,
+	.remove		= altera_gpio_remove,
+};
+
+static int __init altera_gpio_init(void)
+{
+	return platform_driver_register(&altera_gpio_driver);
+}
+subsys_initcall(altera_gpio_init);
+
+static void __exit altera_gpio_exit(void)
+{
+	platform_driver_unregister(&altera_gpio_driver);
+}
+module_exit(altera_gpio_exit);
+
+MODULE_AUTHOR("Tien Hock Loh <thloh@altera.com>");
+MODULE_DESCRIPTION("Altera GPIO driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/gpio-amd-fch.c b/drivers/gpio/gpio-amd-fch.c
new file mode 100644
index 000000000..2a21354ed
--- /dev/null
+++ b/drivers/gpio/gpio-amd-fch.c
@@ -0,0 +1,192 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+/*
+ * GPIO driver for the AMD G series FCH (eg. GX-412TC)
+ *
+ * Copyright (C) 2018 metux IT consult
+ * Author: Enrico Weigelt, metux IT consult <info@metux.net>
+ *
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/gpio/driver.h>
+#include <linux/platform_data/gpio/gpio-amd-fch.h>
+#include <linux/spinlock.h>
+
+#define AMD_FCH_MMIO_BASE		0xFED80000
+#define AMD_FCH_GPIO_BANK0_BASE		0x1500
+#define AMD_FCH_GPIO_SIZE		0x0300
+
+#define AMD_FCH_GPIO_FLAG_DIRECTION	BIT(23)
+#define AMD_FCH_GPIO_FLAG_WRITE		BIT(22)
+#define AMD_FCH_GPIO_FLAG_READ		BIT(16)
+
+static const struct resource amd_fch_gpio_iores =
+	DEFINE_RES_MEM_NAMED(
+		AMD_FCH_MMIO_BASE + AMD_FCH_GPIO_BANK0_BASE,
+		AMD_FCH_GPIO_SIZE,
+		"amd-fch-gpio-iomem");
+
+struct amd_fch_gpio_priv {
+	struct gpio_chip		gc;
+	void __iomem			*base;
+	struct amd_fch_gpio_pdata	*pdata;
+	spinlock_t			lock;
+};
+
+static void __iomem *amd_fch_gpio_addr(struct amd_fch_gpio_priv *priv,
+				       unsigned int gpio)
+{
+	return priv->base + priv->pdata->gpio_reg[gpio]*sizeof(u32);
+}
+
+static int amd_fch_gpio_direction_input(struct gpio_chip *gc,
+					unsigned int offset)
+{
+	unsigned long flags;
+	struct amd_fch_gpio_priv *priv = gpiochip_get_data(gc);
+	void __iomem *ptr = amd_fch_gpio_addr(priv, offset);
+
+	spin_lock_irqsave(&priv->lock, flags);
+	writel_relaxed(readl_relaxed(ptr) & ~AMD_FCH_GPIO_FLAG_DIRECTION, ptr);
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	return 0;
+}
+
+static int amd_fch_gpio_direction_output(struct gpio_chip *gc,
+					 unsigned int gpio, int value)
+{
+	unsigned long flags;
+	struct amd_fch_gpio_priv *priv = gpiochip_get_data(gc);
+	void __iomem *ptr = amd_fch_gpio_addr(priv, gpio);
+	u32 val;
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	val = readl_relaxed(ptr);
+	if (value)
+		val |= AMD_FCH_GPIO_FLAG_WRITE;
+	else
+		val &= ~AMD_FCH_GPIO_FLAG_WRITE;
+
+	writel_relaxed(val | AMD_FCH_GPIO_FLAG_DIRECTION, ptr);
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	return 0;
+}
+
+static int amd_fch_gpio_get_direction(struct gpio_chip *gc, unsigned int gpio)
+{
+	int ret;
+	unsigned long flags;
+	struct amd_fch_gpio_priv *priv = gpiochip_get_data(gc);
+	void __iomem *ptr = amd_fch_gpio_addr(priv, gpio);
+
+	spin_lock_irqsave(&priv->lock, flags);
+	ret = (readl_relaxed(ptr) & AMD_FCH_GPIO_FLAG_DIRECTION);
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	return ret ? GPIO_LINE_DIRECTION_OUT : GPIO_LINE_DIRECTION_IN;
+}
+
+static void amd_fch_gpio_set(struct gpio_chip *gc,
+			     unsigned int gpio, int value)
+{
+	unsigned long flags;
+	struct amd_fch_gpio_priv *priv = gpiochip_get_data(gc);
+	void __iomem *ptr = amd_fch_gpio_addr(priv, gpio);
+	u32 mask;
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	mask = readl_relaxed(ptr);
+	if (value)
+		mask |= AMD_FCH_GPIO_FLAG_WRITE;
+	else
+		mask &= ~AMD_FCH_GPIO_FLAG_WRITE;
+	writel_relaxed(mask, ptr);
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static int amd_fch_gpio_get(struct gpio_chip *gc,
+			    unsigned int offset)
+{
+	unsigned long flags;
+	int ret;
+	struct amd_fch_gpio_priv *priv = gpiochip_get_data(gc);
+	void __iomem *ptr = amd_fch_gpio_addr(priv, offset);
+
+	spin_lock_irqsave(&priv->lock, flags);
+	ret = (readl_relaxed(ptr) & AMD_FCH_GPIO_FLAG_READ);
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	return ret;
+}
+
+static int amd_fch_gpio_request(struct gpio_chip *chip,
+				unsigned int gpio_pin)
+{
+	return 0;
+}
+
+static int amd_fch_gpio_probe(struct platform_device *pdev)
+{
+	struct amd_fch_gpio_priv *priv;
+	struct amd_fch_gpio_pdata *pdata;
+
+	pdata = dev_get_platdata(&pdev->dev);
+	if (!pdata) {
+		dev_err(&pdev->dev, "no platform_data\n");
+		return -ENOENT;
+	}
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->pdata	= pdata;
+
+	priv->gc.owner			= THIS_MODULE;
+	priv->gc.parent			= &pdev->dev;
+	priv->gc.label			= dev_name(&pdev->dev);
+	priv->gc.ngpio			= priv->pdata->gpio_num;
+	priv->gc.names			= priv->pdata->gpio_names;
+	priv->gc.base			= -1;
+	priv->gc.request		= amd_fch_gpio_request;
+	priv->gc.direction_input	= amd_fch_gpio_direction_input;
+	priv->gc.direction_output	= amd_fch_gpio_direction_output;
+	priv->gc.get_direction		= amd_fch_gpio_get_direction;
+	priv->gc.get			= amd_fch_gpio_get;
+	priv->gc.set			= amd_fch_gpio_set;
+
+	spin_lock_init(&priv->lock);
+
+	priv->base = devm_ioremap_resource(&pdev->dev, &amd_fch_gpio_iores);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	platform_set_drvdata(pdev, priv);
+
+	return devm_gpiochip_add_data(&pdev->dev, &priv->gc, priv);
+}
+
+static struct platform_driver amd_fch_gpio_driver = {
+	.driver = {
+		.name = AMD_FCH_GPIO_DRIVER_NAME,
+	},
+	.probe = amd_fch_gpio_probe,
+};
+
+module_platform_driver(amd_fch_gpio_driver);
+
+MODULE_AUTHOR("Enrico Weigelt, metux IT consult <info@metux.net>");
+MODULE_DESCRIPTION("AMD G-series FCH GPIO driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" AMD_FCH_GPIO_DRIVER_NAME);
diff --git a/drivers/gpio/gpio-amd8111.c b/drivers/gpio/gpio-amd8111.c
new file mode 100644
index 000000000..68d95051d
--- /dev/null
+++ b/drivers/gpio/gpio-amd8111.c
@@ -0,0 +1,253 @@
+/*
+ * GPIO driver for AMD 8111 south bridges
+ *
+ * Copyright (c) 2012 Dmitry Eremin-Solenikov
+ *
+ * Based on the AMD RNG driver:
+ * Copyright 2005 (c) MontaVista Software, Inc.
+ * with the majority of the code coming from:
+ *
+ * Hardware driver for the Intel/AMD/VIA Random Number Generators (RNG)
+ * (c) Copyright 2003 Red Hat Inc <jgarzik@redhat.com>
+ *
+ * derived from
+ *
+ * Hardware driver for the AMD 768 Random Number Generator (RNG)
+ * (c) Copyright 2001 Red Hat Inc
+ *
+ * derived from
+ *
+ * Hardware driver for Intel i810 Random Number Generator (RNG)
+ * Copyright 2000,2001 Jeff Garzik <jgarzik@pobox.com>
+ * Copyright 2000,2001 Philipp Rumpf <prumpf@mandrakesoft.com>
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/gpio/driver.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+
+#define PMBASE_OFFSET 0xb0
+#define PMBASE_SIZE   0x30
+
+#define AMD_REG_GPIO(i) (0x10 + (i))
+
+#define AMD_GPIO_LTCH_STS	0x40 /* Latch status, w1 */
+#define AMD_GPIO_RTIN		0x20 /* Real Time in, ro */
+#define AMD_GPIO_DEBOUNCE	0x10 /* Debounce, rw */
+#define AMD_GPIO_MODE_MASK	0x0c /* Pin Mode Select, rw */
+#define AMD_GPIO_MODE_IN	0x00
+#define AMD_GPIO_MODE_OUT	0x04
+/* Enable alternative (e.g. clkout, IRQ, etc) function of the pin */
+#define AMD_GPIO_MODE_ALTFN	0x08 /* Or 0x09 */
+#define AMD_GPIO_X_MASK		0x03 /* In/Out specific, rw */
+#define AMD_GPIO_X_IN_ACTIVEHI	0x01 /* Active High */
+#define AMD_GPIO_X_IN_LATCH	0x02 /* Latched version is selected */
+#define AMD_GPIO_X_OUT_LOW	0x00
+#define AMD_GPIO_X_OUT_HI	0x01
+#define AMD_GPIO_X_OUT_CLK0	0x02
+#define AMD_GPIO_X_OUT_CLK1	0x03
+
+/*
+ * Data for PCI driver interface
+ *
+ * This data only exists for exporting the supported
+ * PCI ids via MODULE_DEVICE_TABLE.  We do not actually
+ * register a pci_driver, because someone else might one day
+ * want to register another driver on the same PCI id.
+ */
+static const struct pci_device_id pci_tbl[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS), 0 },
+	{ 0, },	/* terminate list */
+};
+MODULE_DEVICE_TABLE(pci, pci_tbl);
+
+struct amd_gpio {
+	struct gpio_chip	chip;
+	u32			pmbase;
+	void __iomem		*pm;
+	struct pci_dev		*pdev;
+	spinlock_t		lock; /* guards hw registers and orig table */
+	u8			orig[32];
+};
+
+static int amd_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+	struct amd_gpio *agp = gpiochip_get_data(chip);
+
+	agp->orig[offset] = ioread8(agp->pm + AMD_REG_GPIO(offset)) &
+		(AMD_GPIO_DEBOUNCE | AMD_GPIO_MODE_MASK | AMD_GPIO_X_MASK);
+
+	dev_dbg(&agp->pdev->dev, "Requested gpio %d, data %x\n", offset, agp->orig[offset]);
+
+	return 0;
+}
+
+static void amd_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+	struct amd_gpio *agp = gpiochip_get_data(chip);
+
+	dev_dbg(&agp->pdev->dev, "Freed gpio %d, data %x\n", offset, agp->orig[offset]);
+
+	iowrite8(agp->orig[offset], agp->pm + AMD_REG_GPIO(offset));
+}
+
+static void amd_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct amd_gpio *agp = gpiochip_get_data(chip);
+	u8 temp;
+	unsigned long flags;
+
+	spin_lock_irqsave(&agp->lock, flags);
+	temp = ioread8(agp->pm + AMD_REG_GPIO(offset));
+	temp = (temp & AMD_GPIO_DEBOUNCE) | AMD_GPIO_MODE_OUT | (value ? AMD_GPIO_X_OUT_HI : AMD_GPIO_X_OUT_LOW);
+	iowrite8(temp, agp->pm + AMD_REG_GPIO(offset));
+	spin_unlock_irqrestore(&agp->lock, flags);
+
+	dev_dbg(&agp->pdev->dev, "Setting gpio %d, value %d, reg=%02x\n", offset, !!value, temp);
+}
+
+static int amd_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct amd_gpio *agp = gpiochip_get_data(chip);
+	u8 temp;
+
+	temp = ioread8(agp->pm + AMD_REG_GPIO(offset));
+
+	dev_dbg(&agp->pdev->dev, "Getting gpio %d, reg=%02x\n", offset, temp);
+
+	return (temp & AMD_GPIO_RTIN) ? 1 : 0;
+}
+
+static int amd_gpio_dirout(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct amd_gpio *agp = gpiochip_get_data(chip);
+	u8 temp;
+	unsigned long flags;
+
+	spin_lock_irqsave(&agp->lock, flags);
+	temp = ioread8(agp->pm + AMD_REG_GPIO(offset));
+	temp = (temp & AMD_GPIO_DEBOUNCE) | AMD_GPIO_MODE_OUT | (value ? AMD_GPIO_X_OUT_HI : AMD_GPIO_X_OUT_LOW);
+	iowrite8(temp, agp->pm + AMD_REG_GPIO(offset));
+	spin_unlock_irqrestore(&agp->lock, flags);
+
+	dev_dbg(&agp->pdev->dev, "Dirout gpio %d, value %d, reg=%02x\n", offset, !!value, temp);
+
+	return 0;
+}
+
+static int amd_gpio_dirin(struct gpio_chip *chip, unsigned offset)
+{
+	struct amd_gpio *agp = gpiochip_get_data(chip);
+	u8 temp;
+	unsigned long flags;
+
+	spin_lock_irqsave(&agp->lock, flags);
+	temp = ioread8(agp->pm + AMD_REG_GPIO(offset));
+	temp = (temp & AMD_GPIO_DEBOUNCE) | AMD_GPIO_MODE_IN;
+	iowrite8(temp, agp->pm + AMD_REG_GPIO(offset));
+	spin_unlock_irqrestore(&agp->lock, flags);
+
+	dev_dbg(&agp->pdev->dev, "Dirin gpio %d, reg=%02x\n", offset, temp);
+
+	return 0;
+}
+
+static struct amd_gpio gp = {
+	.chip = {
+		.label		= "AMD GPIO",
+		.owner		= THIS_MODULE,
+		.base		= -1,
+		.ngpio		= 32,
+		.request	= amd_gpio_request,
+		.free		= amd_gpio_free,
+		.set		= amd_gpio_set,
+		.get		= amd_gpio_get,
+		.direction_output = amd_gpio_dirout,
+		.direction_input = amd_gpio_dirin,
+	},
+};
+
+static int __init amd_gpio_init(void)
+{
+	int err = -ENODEV;
+	struct pci_dev *pdev = NULL;
+	const struct pci_device_id *ent;
+
+
+	/* We look for our device - AMD South Bridge
+	 * I don't know about a system with two such bridges,
+	 * so we can assume that there is max. one device.
+	 *
+	 * We can't use plain pci_driver mechanism,
+	 * as the device is really a multiple function device,
+	 * main driver that binds to the pci_device is an smbus
+	 * driver and have to find & bind to the device this way.
+	 */
+	for_each_pci_dev(pdev) {
+		ent = pci_match_id(pci_tbl, pdev);
+		if (ent)
+			goto found;
+	}
+	/* Device not found. */
+	goto out;
+
+found:
+	err = pci_read_config_dword(pdev, 0x58, &gp.pmbase);
+	if (err)
+		goto out;
+	err = -EIO;
+	gp.pmbase &= 0x0000FF00;
+	if (gp.pmbase == 0)
+		goto out;
+	if (!devm_request_region(&pdev->dev, gp.pmbase + PMBASE_OFFSET,
+		PMBASE_SIZE, "AMD GPIO")) {
+		dev_err(&pdev->dev, "AMD GPIO region 0x%x already in use!\n",
+			gp.pmbase + PMBASE_OFFSET);
+		err = -EBUSY;
+		goto out;
+	}
+	gp.pm = ioport_map(gp.pmbase + PMBASE_OFFSET, PMBASE_SIZE);
+	if (!gp.pm) {
+		dev_err(&pdev->dev, "Couldn't map io port into io memory\n");
+		err = -ENOMEM;
+		goto out;
+	}
+	gp.pdev = pdev;
+	gp.chip.parent = &pdev->dev;
+
+	spin_lock_init(&gp.lock);
+
+	printk(KERN_INFO "AMD-8111 GPIO detected\n");
+	err = gpiochip_add_data(&gp.chip, &gp);
+	if (err) {
+		printk(KERN_ERR "GPIO registering failed (%d)\n",
+		       err);
+		ioport_unmap(gp.pm);
+		goto out;
+	}
+	return 0;
+
+out:
+	pci_dev_put(pdev);
+	return err;
+}
+
+static void __exit amd_gpio_exit(void)
+{
+	gpiochip_remove(&gp.chip);
+	ioport_unmap(gp.pm);
+	pci_dev_put(gp.pdev);
+}
+
+module_init(amd_gpio_init);
+module_exit(amd_gpio_exit);
+
+MODULE_AUTHOR("The Linux Kernel team");
+MODULE_DESCRIPTION("GPIO driver for AMD chipsets");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/gpio-amdpt.c b/drivers/gpio/gpio-amdpt.c
new file mode 100644
index 000000000..44398992a
--- /dev/null
+++ b/drivers/gpio/gpio-amdpt.c
@@ -0,0 +1,157 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * AMD Promontory GPIO driver
+ *
+ * Copyright (C) 2015 ASMedia Technology Inc.
+ * Author: YD Tseng <yd_tseng@asmedia.com.tw>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/gpio/driver.h>
+#include <linux/spinlock.h>
+#include <linux/acpi.h>
+#include <linux/platform_device.h>
+
+#define PT_TOTAL_GPIO 8
+
+/* PCI-E MMIO register offsets */
+#define PT_DIRECTION_REG   0x00
+#define PT_INPUTDATA_REG   0x04
+#define PT_OUTPUTDATA_REG  0x08
+#define PT_CLOCKRATE_REG   0x0C
+#define PT_SYNC_REG        0x28
+
+struct pt_gpio_chip {
+	struct gpio_chip         gc;
+	void __iomem             *reg_base;
+};
+
+static int pt_gpio_request(struct gpio_chip *gc, unsigned offset)
+{
+	struct pt_gpio_chip *pt_gpio = gpiochip_get_data(gc);
+	unsigned long flags;
+	u32 using_pins;
+
+	dev_dbg(gc->parent, "pt_gpio_request offset=%x\n", offset);
+
+	spin_lock_irqsave(&gc->bgpio_lock, flags);
+
+	using_pins = readl(pt_gpio->reg_base + PT_SYNC_REG);
+	if (using_pins & BIT(offset)) {
+		dev_warn(gc->parent, "PT GPIO pin %x reconfigured\n",
+			 offset);
+		spin_unlock_irqrestore(&gc->bgpio_lock, flags);
+		return -EINVAL;
+	}
+
+	writel(using_pins | BIT(offset), pt_gpio->reg_base + PT_SYNC_REG);
+
+	spin_unlock_irqrestore(&gc->bgpio_lock, flags);
+
+	return 0;
+}
+
+static void pt_gpio_free(struct gpio_chip *gc, unsigned offset)
+{
+	struct pt_gpio_chip *pt_gpio = gpiochip_get_data(gc);
+	unsigned long flags;
+	u32 using_pins;
+
+	spin_lock_irqsave(&gc->bgpio_lock, flags);
+
+	using_pins = readl(pt_gpio->reg_base + PT_SYNC_REG);
+	using_pins &= ~BIT(offset);
+	writel(using_pins, pt_gpio->reg_base + PT_SYNC_REG);
+
+	spin_unlock_irqrestore(&gc->bgpio_lock, flags);
+
+	dev_dbg(gc->parent, "pt_gpio_free offset=%x\n", offset);
+}
+
+static int pt_gpio_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct acpi_device *acpi_dev;
+	acpi_handle handle = ACPI_HANDLE(dev);
+	struct pt_gpio_chip *pt_gpio;
+	int ret = 0;
+
+	if (acpi_bus_get_device(handle, &acpi_dev)) {
+		dev_err(dev, "PT GPIO device node not found\n");
+		return -ENODEV;
+	}
+
+	pt_gpio = devm_kzalloc(dev, sizeof(struct pt_gpio_chip), GFP_KERNEL);
+	if (!pt_gpio)
+		return -ENOMEM;
+
+	pt_gpio->reg_base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(pt_gpio->reg_base)) {
+		dev_err(dev, "Failed to map MMIO resource for PT GPIO.\n");
+		return PTR_ERR(pt_gpio->reg_base);
+	}
+
+	ret = bgpio_init(&pt_gpio->gc, dev, 4,
+			 pt_gpio->reg_base + PT_INPUTDATA_REG,
+			 pt_gpio->reg_base + PT_OUTPUTDATA_REG, NULL,
+			 pt_gpio->reg_base + PT_DIRECTION_REG, NULL,
+			 BGPIOF_READ_OUTPUT_REG_SET);
+	if (ret) {
+		dev_err(dev, "bgpio_init failed\n");
+		return ret;
+	}
+
+	pt_gpio->gc.owner            = THIS_MODULE;
+	pt_gpio->gc.request          = pt_gpio_request;
+	pt_gpio->gc.free             = pt_gpio_free;
+	pt_gpio->gc.ngpio            = PT_TOTAL_GPIO;
+#if defined(CONFIG_OF_GPIO)
+	pt_gpio->gc.of_node          = dev->of_node;
+#endif
+	ret = gpiochip_add_data(&pt_gpio->gc, pt_gpio);
+	if (ret) {
+		dev_err(dev, "Failed to register GPIO lib\n");
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, pt_gpio);
+
+	/* initialize register setting */
+	writel(0, pt_gpio->reg_base + PT_SYNC_REG);
+	writel(0, pt_gpio->reg_base + PT_CLOCKRATE_REG);
+
+	dev_dbg(dev, "PT GPIO driver loaded\n");
+	return ret;
+}
+
+static int pt_gpio_remove(struct platform_device *pdev)
+{
+	struct pt_gpio_chip *pt_gpio = platform_get_drvdata(pdev);
+
+	gpiochip_remove(&pt_gpio->gc);
+
+	return 0;
+}
+
+static const struct acpi_device_id pt_gpio_acpi_match[] = {
+	{ "AMDF030", 0 },
+	{ "AMDIF030", 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, pt_gpio_acpi_match);
+
+static struct platform_driver pt_gpio_driver = {
+	.driver = {
+		.name = "pt-gpio",
+		.acpi_match_table = ACPI_PTR(pt_gpio_acpi_match),
+	},
+	.probe = pt_gpio_probe,
+	.remove = pt_gpio_remove,
+};
+
+module_platform_driver(pt_gpio_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("YD Tseng <yd_tseng@asmedia.com.tw>");
+MODULE_DESCRIPTION("AMD Promontory GPIO Driver");
diff --git a/drivers/gpio/gpio-arizona.c b/drivers/gpio/gpio-arizona.c
new file mode 100644
index 000000000..2bc173c35
--- /dev/null
+++ b/drivers/gpio/gpio-arizona.c
@@ -0,0 +1,214 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * gpiolib support for Wolfson Arizona class devices
+ *
+ * Copyright 2012 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/gpio/driver.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/seq_file.h>
+
+#include <linux/mfd/arizona/core.h>
+#include <linux/mfd/arizona/pdata.h>
+#include <linux/mfd/arizona/registers.h>
+
+struct arizona_gpio {
+	struct arizona *arizona;
+	struct gpio_chip gpio_chip;
+};
+
+static int arizona_gpio_direction_in(struct gpio_chip *chip, unsigned offset)
+{
+	struct arizona_gpio *arizona_gpio = gpiochip_get_data(chip);
+	struct arizona *arizona = arizona_gpio->arizona;
+	bool persistent = gpiochip_line_is_persistent(chip, offset);
+	bool change;
+	int ret;
+
+	ret = regmap_update_bits_check(arizona->regmap,
+				       ARIZONA_GPIO1_CTRL + offset,
+				       ARIZONA_GPN_DIR, ARIZONA_GPN_DIR,
+				       &change);
+	if (ret < 0)
+		return ret;
+
+	if (change && persistent) {
+		pm_runtime_mark_last_busy(chip->parent);
+		pm_runtime_put_autosuspend(chip->parent);
+	}
+
+	return 0;
+}
+
+static int arizona_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct arizona_gpio *arizona_gpio = gpiochip_get_data(chip);
+	struct arizona *arizona = arizona_gpio->arizona;
+	unsigned int reg, val;
+	int ret;
+
+	reg = ARIZONA_GPIO1_CTRL + offset;
+	ret = regmap_read(arizona->regmap, reg, &val);
+	if (ret < 0)
+		return ret;
+
+	/* Resume to read actual registers for input pins */
+	if (val & ARIZONA_GPN_DIR) {
+		ret = pm_runtime_get_sync(chip->parent);
+		if (ret < 0) {
+			dev_err(chip->parent, "Failed to resume: %d\n", ret);
+			pm_runtime_put_autosuspend(chip->parent);
+			return ret;
+		}
+
+		/* Register is cached, drop it to ensure a physical read */
+		ret = regcache_drop_region(arizona->regmap, reg, reg);
+		if (ret < 0) {
+			dev_err(chip->parent, "Failed to drop cache: %d\n",
+				ret);
+			pm_runtime_put_autosuspend(chip->parent);
+			return ret;
+		}
+
+		ret = regmap_read(arizona->regmap, reg, &val);
+		if (ret < 0) {
+			pm_runtime_put_autosuspend(chip->parent);
+			return ret;
+		}
+
+		pm_runtime_mark_last_busy(chip->parent);
+		pm_runtime_put_autosuspend(chip->parent);
+	}
+
+	if (val & ARIZONA_GPN_LVL)
+		return 1;
+	else
+		return 0;
+}
+
+static int arizona_gpio_direction_out(struct gpio_chip *chip,
+				     unsigned offset, int value)
+{
+	struct arizona_gpio *arizona_gpio = gpiochip_get_data(chip);
+	struct arizona *arizona = arizona_gpio->arizona;
+	bool persistent = gpiochip_line_is_persistent(chip, offset);
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(arizona->regmap, ARIZONA_GPIO1_CTRL + offset, &val);
+	if (ret < 0)
+		return ret;
+
+	if ((val & ARIZONA_GPN_DIR) && persistent) {
+		ret = pm_runtime_get_sync(chip->parent);
+		if (ret < 0) {
+			dev_err(chip->parent, "Failed to resume: %d\n", ret);
+			pm_runtime_put(chip->parent);
+			return ret;
+		}
+	}
+
+	if (value)
+		value = ARIZONA_GPN_LVL;
+
+	return regmap_update_bits(arizona->regmap, ARIZONA_GPIO1_CTRL + offset,
+				  ARIZONA_GPN_DIR | ARIZONA_GPN_LVL, value);
+}
+
+static void arizona_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct arizona_gpio *arizona_gpio = gpiochip_get_data(chip);
+	struct arizona *arizona = arizona_gpio->arizona;
+
+	if (value)
+		value = ARIZONA_GPN_LVL;
+
+	regmap_update_bits(arizona->regmap, ARIZONA_GPIO1_CTRL + offset,
+			   ARIZONA_GPN_LVL, value);
+}
+
+static const struct gpio_chip template_chip = {
+	.label			= "arizona",
+	.owner			= THIS_MODULE,
+	.direction_input	= arizona_gpio_direction_in,
+	.get			= arizona_gpio_get,
+	.direction_output	= arizona_gpio_direction_out,
+	.set			= arizona_gpio_set,
+	.can_sleep		= true,
+};
+
+static int arizona_gpio_probe(struct platform_device *pdev)
+{
+	struct arizona *arizona = dev_get_drvdata(pdev->dev.parent);
+	struct arizona_pdata *pdata = &arizona->pdata;
+	struct arizona_gpio *arizona_gpio;
+	int ret;
+
+	arizona_gpio = devm_kzalloc(&pdev->dev, sizeof(*arizona_gpio),
+				    GFP_KERNEL);
+	if (!arizona_gpio)
+		return -ENOMEM;
+
+	arizona_gpio->arizona = arizona;
+	arizona_gpio->gpio_chip = template_chip;
+	arizona_gpio->gpio_chip.parent = &pdev->dev;
+#ifdef CONFIG_OF_GPIO
+	arizona_gpio->gpio_chip.of_node = arizona->dev->of_node;
+#endif
+
+	switch (arizona->type) {
+	case WM5102:
+	case WM5110:
+	case WM8280:
+	case WM8997:
+	case WM8998:
+	case WM1814:
+		arizona_gpio->gpio_chip.ngpio = 5;
+		break;
+	case WM1831:
+	case CS47L24:
+		arizona_gpio->gpio_chip.ngpio = 2;
+		break;
+	default:
+		dev_err(&pdev->dev, "Unknown chip variant %d\n",
+			arizona->type);
+		return -EINVAL;
+	}
+
+	if (pdata->gpio_base)
+		arizona_gpio->gpio_chip.base = pdata->gpio_base;
+	else
+		arizona_gpio->gpio_chip.base = -1;
+
+	pm_runtime_enable(&pdev->dev);
+
+	ret = devm_gpiochip_add_data(&pdev->dev, &arizona_gpio->gpio_chip,
+				     arizona_gpio);
+	if (ret < 0) {
+		pm_runtime_disable(&pdev->dev);
+		dev_err(&pdev->dev, "Could not register gpiochip, %d\n",
+			ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static struct platform_driver arizona_gpio_driver = {
+	.driver.name	= "arizona-gpio",
+	.probe		= arizona_gpio_probe,
+};
+
+module_platform_driver(arizona_gpio_driver);
+
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("GPIO interface for Arizona devices");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:arizona-gpio");
diff --git a/drivers/gpio/gpio-aspeed-sgpio.c b/drivers/gpio/gpio-aspeed-sgpio.c
new file mode 100644
index 000000000..64e54f8c3
--- /dev/null
+++ b/drivers/gpio/gpio-aspeed-sgpio.c
@@ -0,0 +1,573 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2019 American Megatrends International LLC.
+ *
+ * Author: Karthikeyan Mani <karthikeyanm@amiindia.co.in>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/gpio/driver.h>
+#include <linux/hashtable.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/string.h>
+
+/*
+ * MAX_NR_HW_GPIO represents the number of actual hardware-supported GPIOs (ie,
+ * slots within the clocked serial GPIO data). Since each HW GPIO is both an
+ * input and an output, we provide MAX_NR_HW_GPIO * 2 lines on our gpiochip
+ * device.
+ *
+ * We use SGPIO_OUTPUT_OFFSET to define the split between the inputs and
+ * outputs; the inputs start at line 0, the outputs start at OUTPUT_OFFSET.
+ */
+#define MAX_NR_HW_SGPIO			80
+#define SGPIO_OUTPUT_OFFSET		MAX_NR_HW_SGPIO
+
+#define ASPEED_SGPIO_CTRL		0x54
+
+#define ASPEED_SGPIO_PINS_MASK		GENMASK(9, 6)
+#define ASPEED_SGPIO_CLK_DIV_MASK	GENMASK(31, 16)
+#define ASPEED_SGPIO_ENABLE		BIT(0)
+
+struct aspeed_sgpio {
+	struct gpio_chip chip;
+	struct clk *pclk;
+	spinlock_t lock;
+	void __iomem *base;
+	int irq;
+	int n_sgpio;
+};
+
+struct aspeed_sgpio_bank {
+	uint16_t    val_regs;
+	uint16_t    rdata_reg;
+	uint16_t    irq_regs;
+	const char  names[4][3];
+};
+
+/*
+ * Note: The "value" register returns the input value when the GPIO is
+ *	 configured as an input.
+ *
+ *	 The "rdata" register returns the output value when the GPIO is
+ *	 configured as an output.
+ */
+static const struct aspeed_sgpio_bank aspeed_sgpio_banks[] = {
+	{
+		.val_regs = 0x0000,
+		.rdata_reg = 0x0070,
+		.irq_regs = 0x0004,
+		.names = { "A", "B", "C", "D" },
+	},
+	{
+		.val_regs = 0x001C,
+		.rdata_reg = 0x0074,
+		.irq_regs = 0x0020,
+		.names = { "E", "F", "G", "H" },
+	},
+	{
+		.val_regs = 0x0038,
+		.rdata_reg = 0x0078,
+		.irq_regs = 0x003C,
+		.names = { "I", "J" },
+	},
+};
+
+enum aspeed_sgpio_reg {
+	reg_val,
+	reg_rdata,
+	reg_irq_enable,
+	reg_irq_type0,
+	reg_irq_type1,
+	reg_irq_type2,
+	reg_irq_status,
+};
+
+#define GPIO_VAL_VALUE      0x00
+#define GPIO_IRQ_ENABLE     0x00
+#define GPIO_IRQ_TYPE0      0x04
+#define GPIO_IRQ_TYPE1      0x08
+#define GPIO_IRQ_TYPE2      0x0C
+#define GPIO_IRQ_STATUS     0x10
+
+static void __iomem *bank_reg(struct aspeed_sgpio *gpio,
+				     const struct aspeed_sgpio_bank *bank,
+				     const enum aspeed_sgpio_reg reg)
+{
+	switch (reg) {
+	case reg_val:
+		return gpio->base + bank->val_regs + GPIO_VAL_VALUE;
+	case reg_rdata:
+		return gpio->base + bank->rdata_reg;
+	case reg_irq_enable:
+		return gpio->base + bank->irq_regs + GPIO_IRQ_ENABLE;
+	case reg_irq_type0:
+		return gpio->base + bank->irq_regs + GPIO_IRQ_TYPE0;
+	case reg_irq_type1:
+		return gpio->base + bank->irq_regs + GPIO_IRQ_TYPE1;
+	case reg_irq_type2:
+		return gpio->base + bank->irq_regs + GPIO_IRQ_TYPE2;
+	case reg_irq_status:
+		return gpio->base + bank->irq_regs + GPIO_IRQ_STATUS;
+	default:
+		/* acturally if code runs to here, it's an error case */
+		BUG();
+	}
+}
+
+#define GPIO_BANK(x)    ((x % SGPIO_OUTPUT_OFFSET) >> 5)
+#define GPIO_OFFSET(x)  ((x % SGPIO_OUTPUT_OFFSET) & 0x1f)
+#define GPIO_BIT(x)     BIT(GPIO_OFFSET(x))
+
+static const struct aspeed_sgpio_bank *to_bank(unsigned int offset)
+{
+	unsigned int bank;
+
+	bank = GPIO_BANK(offset);
+
+	WARN_ON(bank >= ARRAY_SIZE(aspeed_sgpio_banks));
+	return &aspeed_sgpio_banks[bank];
+}
+
+static int aspeed_sgpio_init_valid_mask(struct gpio_chip *gc,
+		unsigned long *valid_mask, unsigned int ngpios)
+{
+	struct aspeed_sgpio *sgpio = gpiochip_get_data(gc);
+	int n = sgpio->n_sgpio;
+	int c = SGPIO_OUTPUT_OFFSET - n;
+
+	WARN_ON(ngpios < MAX_NR_HW_SGPIO * 2);
+
+	/* input GPIOs in the lower range */
+	bitmap_set(valid_mask, 0, n);
+	bitmap_clear(valid_mask, n, c);
+
+	/* output GPIOS above SGPIO_OUTPUT_OFFSET */
+	bitmap_set(valid_mask, SGPIO_OUTPUT_OFFSET, n);
+	bitmap_clear(valid_mask, SGPIO_OUTPUT_OFFSET + n, c);
+
+	return 0;
+}
+
+static void aspeed_sgpio_irq_init_valid_mask(struct gpio_chip *gc,
+		unsigned long *valid_mask, unsigned int ngpios)
+{
+	struct aspeed_sgpio *sgpio = gpiochip_get_data(gc);
+	int n = sgpio->n_sgpio;
+
+	WARN_ON(ngpios < MAX_NR_HW_SGPIO * 2);
+
+	/* input GPIOs in the lower range */
+	bitmap_set(valid_mask, 0, n);
+	bitmap_clear(valid_mask, n, ngpios - n);
+}
+
+static bool aspeed_sgpio_is_input(unsigned int offset)
+{
+	return offset < SGPIO_OUTPUT_OFFSET;
+}
+
+static int aspeed_sgpio_get(struct gpio_chip *gc, unsigned int offset)
+{
+	struct aspeed_sgpio *gpio = gpiochip_get_data(gc);
+	const struct aspeed_sgpio_bank *bank = to_bank(offset);
+	unsigned long flags;
+	enum aspeed_sgpio_reg reg;
+	int rc = 0;
+
+	spin_lock_irqsave(&gpio->lock, flags);
+
+	reg = aspeed_sgpio_is_input(offset) ? reg_val : reg_rdata;
+	rc = !!(ioread32(bank_reg(gpio, bank, reg)) & GPIO_BIT(offset));
+
+	spin_unlock_irqrestore(&gpio->lock, flags);
+
+	return rc;
+}
+
+static int sgpio_set_value(struct gpio_chip *gc, unsigned int offset, int val)
+{
+	struct aspeed_sgpio *gpio = gpiochip_get_data(gc);
+	const struct aspeed_sgpio_bank *bank = to_bank(offset);
+	void __iomem *addr_r, *addr_w;
+	u32 reg = 0;
+
+	if (aspeed_sgpio_is_input(offset))
+		return -EINVAL;
+
+	/* Since this is an output, read the cached value from rdata, then
+	 * update val. */
+	addr_r = bank_reg(gpio, bank, reg_rdata);
+	addr_w = bank_reg(gpio, bank, reg_val);
+
+	reg = ioread32(addr_r);
+
+	if (val)
+		reg |= GPIO_BIT(offset);
+	else
+		reg &= ~GPIO_BIT(offset);
+
+	iowrite32(reg, addr_w);
+
+	return 0;
+}
+
+static void aspeed_sgpio_set(struct gpio_chip *gc, unsigned int offset, int val)
+{
+	struct aspeed_sgpio *gpio = gpiochip_get_data(gc);
+	unsigned long flags;
+
+	spin_lock_irqsave(&gpio->lock, flags);
+
+	sgpio_set_value(gc, offset, val);
+
+	spin_unlock_irqrestore(&gpio->lock, flags);
+}
+
+static int aspeed_sgpio_dir_in(struct gpio_chip *gc, unsigned int offset)
+{
+	return aspeed_sgpio_is_input(offset) ? 0 : -EINVAL;
+}
+
+static int aspeed_sgpio_dir_out(struct gpio_chip *gc, unsigned int offset, int val)
+{
+	struct aspeed_sgpio *gpio = gpiochip_get_data(gc);
+	unsigned long flags;
+	int rc;
+
+	/* No special action is required for setting the direction; we'll
+	 * error-out in sgpio_set_value if this isn't an output GPIO */
+
+	spin_lock_irqsave(&gpio->lock, flags);
+	rc = sgpio_set_value(gc, offset, val);
+	spin_unlock_irqrestore(&gpio->lock, flags);
+
+	return rc;
+}
+
+static int aspeed_sgpio_get_direction(struct gpio_chip *gc, unsigned int offset)
+{
+	return !!aspeed_sgpio_is_input(offset);
+}
+
+static void irqd_to_aspeed_sgpio_data(struct irq_data *d,
+					struct aspeed_sgpio **gpio,
+					const struct aspeed_sgpio_bank **bank,
+					u32 *bit, int *offset)
+{
+	struct aspeed_sgpio *internal;
+
+	*offset = irqd_to_hwirq(d);
+	internal = irq_data_get_irq_chip_data(d);
+	WARN_ON(!internal);
+
+	*gpio = internal;
+	*bank = to_bank(*offset);
+	*bit = GPIO_BIT(*offset);
+}
+
+static void aspeed_sgpio_irq_ack(struct irq_data *d)
+{
+	const struct aspeed_sgpio_bank *bank;
+	struct aspeed_sgpio *gpio;
+	unsigned long flags;
+	void __iomem *status_addr;
+	int offset;
+	u32 bit;
+
+	irqd_to_aspeed_sgpio_data(d, &gpio, &bank, &bit, &offset);
+
+	status_addr = bank_reg(gpio, bank, reg_irq_status);
+
+	spin_lock_irqsave(&gpio->lock, flags);
+
+	iowrite32(bit, status_addr);
+
+	spin_unlock_irqrestore(&gpio->lock, flags);
+}
+
+static void aspeed_sgpio_irq_set_mask(struct irq_data *d, bool set)
+{
+	const struct aspeed_sgpio_bank *bank;
+	struct aspeed_sgpio *gpio;
+	unsigned long flags;
+	u32 reg, bit;
+	void __iomem *addr;
+	int offset;
+
+	irqd_to_aspeed_sgpio_data(d, &gpio, &bank, &bit, &offset);
+	addr = bank_reg(gpio, bank, reg_irq_enable);
+
+	spin_lock_irqsave(&gpio->lock, flags);
+
+	reg = ioread32(addr);
+	if (set)
+		reg |= bit;
+	else
+		reg &= ~bit;
+
+	iowrite32(reg, addr);
+
+	spin_unlock_irqrestore(&gpio->lock, flags);
+}
+
+static void aspeed_sgpio_irq_mask(struct irq_data *d)
+{
+	aspeed_sgpio_irq_set_mask(d, false);
+}
+
+static void aspeed_sgpio_irq_unmask(struct irq_data *d)
+{
+	aspeed_sgpio_irq_set_mask(d, true);
+}
+
+static int aspeed_sgpio_set_type(struct irq_data *d, unsigned int type)
+{
+	u32 type0 = 0;
+	u32 type1 = 0;
+	u32 type2 = 0;
+	u32 bit, reg;
+	const struct aspeed_sgpio_bank *bank;
+	irq_flow_handler_t handler;
+	struct aspeed_sgpio *gpio;
+	unsigned long flags;
+	void __iomem *addr;
+	int offset;
+
+	irqd_to_aspeed_sgpio_data(d, &gpio, &bank, &bit, &offset);
+
+	switch (type & IRQ_TYPE_SENSE_MASK) {
+	case IRQ_TYPE_EDGE_BOTH:
+		type2 |= bit;
+		fallthrough;
+	case IRQ_TYPE_EDGE_RISING:
+		type0 |= bit;
+		fallthrough;
+	case IRQ_TYPE_EDGE_FALLING:
+		handler = handle_edge_irq;
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		type0 |= bit;
+		fallthrough;
+	case IRQ_TYPE_LEVEL_LOW:
+		type1 |= bit;
+		handler = handle_level_irq;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&gpio->lock, flags);
+
+	addr = bank_reg(gpio, bank, reg_irq_type0);
+	reg = ioread32(addr);
+	reg = (reg & ~bit) | type0;
+	iowrite32(reg, addr);
+
+	addr = bank_reg(gpio, bank, reg_irq_type1);
+	reg = ioread32(addr);
+	reg = (reg & ~bit) | type1;
+	iowrite32(reg, addr);
+
+	addr = bank_reg(gpio, bank, reg_irq_type2);
+	reg = ioread32(addr);
+	reg = (reg & ~bit) | type2;
+	iowrite32(reg, addr);
+
+	spin_unlock_irqrestore(&gpio->lock, flags);
+
+	irq_set_handler_locked(d, handler);
+
+	return 0;
+}
+
+static void aspeed_sgpio_irq_handler(struct irq_desc *desc)
+{
+	struct gpio_chip *gc = irq_desc_get_handler_data(desc);
+	struct irq_chip *ic = irq_desc_get_chip(desc);
+	struct aspeed_sgpio *data = gpiochip_get_data(gc);
+	unsigned int i, p, girq;
+	unsigned long reg;
+
+	chained_irq_enter(ic, desc);
+
+	for (i = 0; i < ARRAY_SIZE(aspeed_sgpio_banks); i++) {
+		const struct aspeed_sgpio_bank *bank = &aspeed_sgpio_banks[i];
+
+		reg = ioread32(bank_reg(data, bank, reg_irq_status));
+
+		for_each_set_bit(p, &reg, 32) {
+			girq = irq_find_mapping(gc->irq.domain, i * 32 + p);
+			generic_handle_irq(girq);
+		}
+
+	}
+
+	chained_irq_exit(ic, desc);
+}
+
+static struct irq_chip aspeed_sgpio_irqchip = {
+	.name       = "aspeed-sgpio",
+	.irq_ack    = aspeed_sgpio_irq_ack,
+	.irq_mask   = aspeed_sgpio_irq_mask,
+	.irq_unmask = aspeed_sgpio_irq_unmask,
+	.irq_set_type   = aspeed_sgpio_set_type,
+};
+
+static int aspeed_sgpio_setup_irqs(struct aspeed_sgpio *gpio,
+				   struct platform_device *pdev)
+{
+	int rc, i;
+	const struct aspeed_sgpio_bank *bank;
+	struct gpio_irq_chip *irq;
+
+	rc = platform_get_irq(pdev, 0);
+	if (rc < 0)
+		return rc;
+
+	gpio->irq = rc;
+
+	/* Disable IRQ and clear Interrupt status registers for all SGPIO Pins. */
+	for (i = 0; i < ARRAY_SIZE(aspeed_sgpio_banks); i++) {
+		bank =  &aspeed_sgpio_banks[i];
+		/* disable irq enable bits */
+		iowrite32(0x00000000, bank_reg(gpio, bank, reg_irq_enable));
+		/* clear status bits */
+		iowrite32(0xffffffff, bank_reg(gpio, bank, reg_irq_status));
+	}
+
+	irq = &gpio->chip.irq;
+	irq->chip = &aspeed_sgpio_irqchip;
+	irq->init_valid_mask = aspeed_sgpio_irq_init_valid_mask;
+	irq->handler = handle_bad_irq;
+	irq->default_type = IRQ_TYPE_NONE;
+	irq->parent_handler = aspeed_sgpio_irq_handler;
+	irq->parent_handler_data = gpio;
+	irq->parents = &gpio->irq;
+	irq->num_parents = 1;
+
+	/* Apply default IRQ settings */
+	for (i = 0; i < ARRAY_SIZE(aspeed_sgpio_banks); i++) {
+		bank = &aspeed_sgpio_banks[i];
+		/* set falling or level-low irq */
+		iowrite32(0x00000000, bank_reg(gpio, bank, reg_irq_type0));
+		/* trigger type is edge */
+		iowrite32(0x00000000, bank_reg(gpio, bank, reg_irq_type1));
+		/* single edge trigger */
+		iowrite32(0x00000000, bank_reg(gpio, bank, reg_irq_type2));
+	}
+
+	return 0;
+}
+
+static const struct of_device_id aspeed_sgpio_of_table[] = {
+	{ .compatible = "aspeed,ast2400-sgpio" },
+	{ .compatible = "aspeed,ast2500-sgpio" },
+	{}
+};
+
+MODULE_DEVICE_TABLE(of, aspeed_sgpio_of_table);
+
+static int __init aspeed_sgpio_probe(struct platform_device *pdev)
+{
+	struct aspeed_sgpio *gpio;
+	u32 nr_gpios, sgpio_freq, sgpio_clk_div;
+	int rc;
+	unsigned long apb_freq;
+
+	gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
+	if (!gpio)
+		return -ENOMEM;
+
+	gpio->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(gpio->base))
+		return PTR_ERR(gpio->base);
+
+	rc = of_property_read_u32(pdev->dev.of_node, "ngpios", &nr_gpios);
+	if (rc < 0) {
+		dev_err(&pdev->dev, "Could not read ngpios property\n");
+		return -EINVAL;
+	} else if (nr_gpios > MAX_NR_HW_SGPIO) {
+		dev_err(&pdev->dev, "Number of GPIOs exceeds the maximum of %d: %d\n",
+			MAX_NR_HW_SGPIO, nr_gpios);
+		return -EINVAL;
+	}
+	gpio->n_sgpio = nr_gpios;
+
+	rc = of_property_read_u32(pdev->dev.of_node, "bus-frequency", &sgpio_freq);
+	if (rc < 0) {
+		dev_err(&pdev->dev, "Could not read bus-frequency property\n");
+		return -EINVAL;
+	}
+
+	gpio->pclk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(gpio->pclk)) {
+		dev_err(&pdev->dev, "devm_clk_get failed\n");
+		return PTR_ERR(gpio->pclk);
+	}
+
+	apb_freq = clk_get_rate(gpio->pclk);
+
+	/*
+	 * From the datasheet,
+	 *	SGPIO period = 1/PCLK * 2 * (GPIO254[31:16] + 1)
+	 *	period = 2 * (GPIO254[31:16] + 1) / PCLK
+	 *	frequency = 1 / (2 * (GPIO254[31:16] + 1) / PCLK)
+	 *	frequency = PCLK / (2 * (GPIO254[31:16] + 1))
+	 *	frequency * 2 * (GPIO254[31:16] + 1) = PCLK
+	 *	GPIO254[31:16] = PCLK / (frequency * 2) - 1
+	 */
+	if (sgpio_freq == 0)
+		return -EINVAL;
+
+	sgpio_clk_div = (apb_freq / (sgpio_freq * 2)) - 1;
+
+	if (sgpio_clk_div > (1 << 16) - 1)
+		return -EINVAL;
+
+	iowrite32(FIELD_PREP(ASPEED_SGPIO_CLK_DIV_MASK, sgpio_clk_div) |
+		  FIELD_PREP(ASPEED_SGPIO_PINS_MASK, (nr_gpios / 8)) |
+		  ASPEED_SGPIO_ENABLE,
+		  gpio->base + ASPEED_SGPIO_CTRL);
+
+	spin_lock_init(&gpio->lock);
+
+	gpio->chip.parent = &pdev->dev;
+	gpio->chip.ngpio = MAX_NR_HW_SGPIO * 2;
+	gpio->chip.init_valid_mask = aspeed_sgpio_init_valid_mask;
+	gpio->chip.direction_input = aspeed_sgpio_dir_in;
+	gpio->chip.direction_output = aspeed_sgpio_dir_out;
+	gpio->chip.get_direction = aspeed_sgpio_get_direction;
+	gpio->chip.request = NULL;
+	gpio->chip.free = NULL;
+	gpio->chip.get = aspeed_sgpio_get;
+	gpio->chip.set = aspeed_sgpio_set;
+	gpio->chip.set_config = NULL;
+	gpio->chip.label = dev_name(&pdev->dev);
+	gpio->chip.base = -1;
+
+	aspeed_sgpio_setup_irqs(gpio, pdev);
+
+	rc = devm_gpiochip_add_data(&pdev->dev, &gpio->chip, gpio);
+	if (rc < 0)
+		return rc;
+
+	return 0;
+}
+
+static struct platform_driver aspeed_sgpio_driver = {
+	.driver = {
+		.name = KBUILD_MODNAME,
+		.of_match_table = aspeed_sgpio_of_table,
+	},
+};
+
+module_platform_driver_probe(aspeed_sgpio_driver, aspeed_sgpio_probe);
+MODULE_DESCRIPTION("Aspeed Serial GPIO Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/gpio-aspeed.c b/drivers/gpio/gpio-aspeed.c
new file mode 100644
index 000000000..bbd04a63f
--- /dev/null
+++ b/drivers/gpio/gpio-aspeed.c
@@ -0,0 +1,1254 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2015 IBM Corp.
+ *
+ * Joel Stanley <joel@jms.id.au>
+ */
+
+#include <asm/div64.h>
+#include <linux/clk.h>
+#include <linux/gpio/driver.h>
+#include <linux/gpio/aspeed.h>
+#include <linux/hashtable.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/string.h>
+
+/*
+ * These two headers aren't meant to be used by GPIO drivers. We need
+ * them in order to access gpio_chip_hwgpio() which we need to implement
+ * the aspeed specific API which allows the coprocessor to request
+ * access to some GPIOs and to arbitrate between coprocessor and ARM.
+ */
+#include <linux/gpio/consumer.h>
+#include "gpiolib.h"
+
+struct aspeed_bank_props {
+	unsigned int bank;
+	u32 input;
+	u32 output;
+};
+
+struct aspeed_gpio_config {
+	unsigned int nr_gpios;
+	const struct aspeed_bank_props *props;
+};
+
+/*
+ * @offset_timer: Maps an offset to an @timer_users index, or zero if disabled
+ * @timer_users: Tracks the number of users for each timer
+ *
+ * The @timer_users has four elements but the first element is unused. This is
+ * to simplify accounting and indexing, as a zero value in @offset_timer
+ * represents disabled debouncing for the GPIO. Any other value for an element
+ * of @offset_timer is used as an index into @timer_users. This behaviour of
+ * the zero value aligns with the behaviour of zero built from the timer
+ * configuration registers (i.e. debouncing is disabled).
+ */
+struct aspeed_gpio {
+	struct gpio_chip chip;
+	struct irq_chip irqc;
+	raw_spinlock_t lock;
+	void __iomem *base;
+	int irq;
+	const struct aspeed_gpio_config *config;
+
+	u8 *offset_timer;
+	unsigned int timer_users[4];
+	struct clk *clk;
+
+	u32 *dcache;
+	u8 *cf_copro_bankmap;
+};
+
+struct aspeed_gpio_bank {
+	uint16_t	val_regs;	/* +0: Rd: read input value, Wr: set write latch
+					 * +4: Rd/Wr: Direction (0=in, 1=out)
+					 */
+	uint16_t	rdata_reg;	/*     Rd: read write latch, Wr: <none>  */
+	uint16_t	irq_regs;
+	uint16_t	debounce_regs;
+	uint16_t	tolerance_regs;
+	uint16_t	cmdsrc_regs;
+	const char	names[4][3];
+};
+
+/*
+ * Note: The "value" register returns the input value sampled on the
+ *       line even when the GPIO is configured as an output. Since
+ *       that input goes through synchronizers, writing, then reading
+ *       back may not return the written value right away.
+ *
+ *       The "rdata" register returns the content of the write latch
+ *       and thus can be used to read back what was last written
+ *       reliably.
+ */
+
+static const int debounce_timers[4] = { 0x00, 0x50, 0x54, 0x58 };
+
+static const struct aspeed_gpio_copro_ops *copro_ops;
+static void *copro_data;
+
+static const struct aspeed_gpio_bank aspeed_gpio_banks[] = {
+	{
+		.val_regs = 0x0000,
+		.rdata_reg = 0x00c0,
+		.irq_regs = 0x0008,
+		.debounce_regs = 0x0040,
+		.tolerance_regs = 0x001c,
+		.cmdsrc_regs = 0x0060,
+		.names = { "A", "B", "C", "D" },
+	},
+	{
+		.val_regs = 0x0020,
+		.rdata_reg = 0x00c4,
+		.irq_regs = 0x0028,
+		.debounce_regs = 0x0048,
+		.tolerance_regs = 0x003c,
+		.cmdsrc_regs = 0x0068,
+		.names = { "E", "F", "G", "H" },
+	},
+	{
+		.val_regs = 0x0070,
+		.rdata_reg = 0x00c8,
+		.irq_regs = 0x0098,
+		.debounce_regs = 0x00b0,
+		.tolerance_regs = 0x00ac,
+		.cmdsrc_regs = 0x0090,
+		.names = { "I", "J", "K", "L" },
+	},
+	{
+		.val_regs = 0x0078,
+		.rdata_reg = 0x00cc,
+		.irq_regs = 0x00e8,
+		.debounce_regs = 0x0100,
+		.tolerance_regs = 0x00fc,
+		.cmdsrc_regs = 0x00e0,
+		.names = { "M", "N", "O", "P" },
+	},
+	{
+		.val_regs = 0x0080,
+		.rdata_reg = 0x00d0,
+		.irq_regs = 0x0118,
+		.debounce_regs = 0x0130,
+		.tolerance_regs = 0x012c,
+		.cmdsrc_regs = 0x0110,
+		.names = { "Q", "R", "S", "T" },
+	},
+	{
+		.val_regs = 0x0088,
+		.rdata_reg = 0x00d4,
+		.irq_regs = 0x0148,
+		.debounce_regs = 0x0160,
+		.tolerance_regs = 0x015c,
+		.cmdsrc_regs = 0x0140,
+		.names = { "U", "V", "W", "X" },
+	},
+	{
+		.val_regs = 0x01E0,
+		.rdata_reg = 0x00d8,
+		.irq_regs = 0x0178,
+		.debounce_regs = 0x0190,
+		.tolerance_regs = 0x018c,
+		.cmdsrc_regs = 0x0170,
+		.names = { "Y", "Z", "AA", "AB" },
+	},
+	{
+		.val_regs = 0x01e8,
+		.rdata_reg = 0x00dc,
+		.irq_regs = 0x01a8,
+		.debounce_regs = 0x01c0,
+		.tolerance_regs = 0x01bc,
+		.cmdsrc_regs = 0x01a0,
+		.names = { "AC", "", "", "" },
+	},
+};
+
+enum aspeed_gpio_reg {
+	reg_val,
+	reg_rdata,
+	reg_dir,
+	reg_irq_enable,
+	reg_irq_type0,
+	reg_irq_type1,
+	reg_irq_type2,
+	reg_irq_status,
+	reg_debounce_sel1,
+	reg_debounce_sel2,
+	reg_tolerance,
+	reg_cmdsrc0,
+	reg_cmdsrc1,
+};
+
+#define GPIO_VAL_VALUE	0x00
+#define GPIO_VAL_DIR	0x04
+
+#define GPIO_IRQ_ENABLE	0x00
+#define GPIO_IRQ_TYPE0	0x04
+#define GPIO_IRQ_TYPE1	0x08
+#define GPIO_IRQ_TYPE2	0x0c
+#define GPIO_IRQ_STATUS	0x10
+
+#define GPIO_DEBOUNCE_SEL1 0x00
+#define GPIO_DEBOUNCE_SEL2 0x04
+
+#define GPIO_CMDSRC_0	0x00
+#define GPIO_CMDSRC_1	0x04
+#define  GPIO_CMDSRC_ARM		0
+#define  GPIO_CMDSRC_LPC		1
+#define  GPIO_CMDSRC_COLDFIRE		2
+#define  GPIO_CMDSRC_RESERVED		3
+
+/* This will be resolved at compile time */
+static inline void __iomem *bank_reg(struct aspeed_gpio *gpio,
+				     const struct aspeed_gpio_bank *bank,
+				     const enum aspeed_gpio_reg reg)
+{
+	switch (reg) {
+	case reg_val:
+		return gpio->base + bank->val_regs + GPIO_VAL_VALUE;
+	case reg_rdata:
+		return gpio->base + bank->rdata_reg;
+	case reg_dir:
+		return gpio->base + bank->val_regs + GPIO_VAL_DIR;
+	case reg_irq_enable:
+		return gpio->base + bank->irq_regs + GPIO_IRQ_ENABLE;
+	case reg_irq_type0:
+		return gpio->base + bank->irq_regs + GPIO_IRQ_TYPE0;
+	case reg_irq_type1:
+		return gpio->base + bank->irq_regs + GPIO_IRQ_TYPE1;
+	case reg_irq_type2:
+		return gpio->base + bank->irq_regs + GPIO_IRQ_TYPE2;
+	case reg_irq_status:
+		return gpio->base + bank->irq_regs + GPIO_IRQ_STATUS;
+	case reg_debounce_sel1:
+		return gpio->base + bank->debounce_regs + GPIO_DEBOUNCE_SEL1;
+	case reg_debounce_sel2:
+		return gpio->base + bank->debounce_regs + GPIO_DEBOUNCE_SEL2;
+	case reg_tolerance:
+		return gpio->base + bank->tolerance_regs;
+	case reg_cmdsrc0:
+		return gpio->base + bank->cmdsrc_regs + GPIO_CMDSRC_0;
+	case reg_cmdsrc1:
+		return gpio->base + bank->cmdsrc_regs + GPIO_CMDSRC_1;
+	}
+	BUG();
+}
+
+#define GPIO_BANK(x)	((x) >> 5)
+#define GPIO_OFFSET(x)	((x) & 0x1f)
+#define GPIO_BIT(x)	BIT(GPIO_OFFSET(x))
+
+#define _GPIO_SET_DEBOUNCE(t, o, i) ((!!((t) & BIT(i))) << GPIO_OFFSET(o))
+#define GPIO_SET_DEBOUNCE1(t, o) _GPIO_SET_DEBOUNCE(t, o, 1)
+#define GPIO_SET_DEBOUNCE2(t, o) _GPIO_SET_DEBOUNCE(t, o, 0)
+
+static const struct aspeed_gpio_bank *to_bank(unsigned int offset)
+{
+	unsigned int bank = GPIO_BANK(offset);
+
+	WARN_ON(bank >= ARRAY_SIZE(aspeed_gpio_banks));
+	return &aspeed_gpio_banks[bank];
+}
+
+static inline bool is_bank_props_sentinel(const struct aspeed_bank_props *props)
+{
+	return !(props->input || props->output);
+}
+
+static inline const struct aspeed_bank_props *find_bank_props(
+		struct aspeed_gpio *gpio, unsigned int offset)
+{
+	const struct aspeed_bank_props *props = gpio->config->props;
+
+	while (!is_bank_props_sentinel(props)) {
+		if (props->bank == GPIO_BANK(offset))
+			return props;
+		props++;
+	}
+
+	return NULL;
+}
+
+static inline bool have_gpio(struct aspeed_gpio *gpio, unsigned int offset)
+{
+	const struct aspeed_bank_props *props = find_bank_props(gpio, offset);
+	const struct aspeed_gpio_bank *bank = to_bank(offset);
+	unsigned int group = GPIO_OFFSET(offset) / 8;
+
+	return bank->names[group][0] != '\0' &&
+		(!props || ((props->input | props->output) & GPIO_BIT(offset)));
+}
+
+static inline bool have_input(struct aspeed_gpio *gpio, unsigned int offset)
+{
+	const struct aspeed_bank_props *props = find_bank_props(gpio, offset);
+
+	return !props || (props->input & GPIO_BIT(offset));
+}
+
+#define have_irq(g, o) have_input((g), (o))
+#define have_debounce(g, o) have_input((g), (o))
+
+static inline bool have_output(struct aspeed_gpio *gpio, unsigned int offset)
+{
+	const struct aspeed_bank_props *props = find_bank_props(gpio, offset);
+
+	return !props || (props->output & GPIO_BIT(offset));
+}
+
+static void aspeed_gpio_change_cmd_source(struct aspeed_gpio *gpio,
+					  const struct aspeed_gpio_bank *bank,
+					  int bindex, int cmdsrc)
+{
+	void __iomem *c0 = bank_reg(gpio, bank, reg_cmdsrc0);
+	void __iomem *c1 = bank_reg(gpio, bank, reg_cmdsrc1);
+	u32 bit, reg;
+
+	/*
+	 * Each register controls 4 banks, so take the bottom 2
+	 * bits of the bank index, and use them to select the
+	 * right control bit (0, 8, 16 or 24).
+	 */
+	bit = BIT((bindex & 3) << 3);
+
+	/* Source 1 first to avoid illegal 11 combination */
+	reg = ioread32(c1);
+	if (cmdsrc & 2)
+		reg |= bit;
+	else
+		reg &= ~bit;
+	iowrite32(reg, c1);
+
+	/* Then Source 0 */
+	reg = ioread32(c0);
+	if (cmdsrc & 1)
+		reg |= bit;
+	else
+		reg &= ~bit;
+	iowrite32(reg, c0);
+}
+
+static bool aspeed_gpio_copro_request(struct aspeed_gpio *gpio,
+				      unsigned int offset)
+{
+	const struct aspeed_gpio_bank *bank = to_bank(offset);
+
+	if (!copro_ops || !gpio->cf_copro_bankmap)
+		return false;
+	if (!gpio->cf_copro_bankmap[offset >> 3])
+		return false;
+	if (!copro_ops->request_access)
+		return false;
+
+	/* Pause the coprocessor */
+	copro_ops->request_access(copro_data);
+
+	/* Change command source back to ARM */
+	aspeed_gpio_change_cmd_source(gpio, bank, offset >> 3, GPIO_CMDSRC_ARM);
+
+	/* Update cache */
+	gpio->dcache[GPIO_BANK(offset)] = ioread32(bank_reg(gpio, bank, reg_rdata));
+
+	return true;
+}
+
+static void aspeed_gpio_copro_release(struct aspeed_gpio *gpio,
+				      unsigned int offset)
+{
+	const struct aspeed_gpio_bank *bank = to_bank(offset);
+
+	if (!copro_ops || !gpio->cf_copro_bankmap)
+		return;
+	if (!gpio->cf_copro_bankmap[offset >> 3])
+		return;
+	if (!copro_ops->release_access)
+		return;
+
+	/* Change command source back to ColdFire */
+	aspeed_gpio_change_cmd_source(gpio, bank, offset >> 3,
+				      GPIO_CMDSRC_COLDFIRE);
+
+	/* Restart the coprocessor */
+	copro_ops->release_access(copro_data);
+}
+
+static int aspeed_gpio_get(struct gpio_chip *gc, unsigned int offset)
+{
+	struct aspeed_gpio *gpio = gpiochip_get_data(gc);
+	const struct aspeed_gpio_bank *bank = to_bank(offset);
+
+	return !!(ioread32(bank_reg(gpio, bank, reg_val)) & GPIO_BIT(offset));
+}
+
+static void __aspeed_gpio_set(struct gpio_chip *gc, unsigned int offset,
+			      int val)
+{
+	struct aspeed_gpio *gpio = gpiochip_get_data(gc);
+	const struct aspeed_gpio_bank *bank = to_bank(offset);
+	void __iomem *addr;
+	u32 reg;
+
+	addr = bank_reg(gpio, bank, reg_val);
+	reg = gpio->dcache[GPIO_BANK(offset)];
+
+	if (val)
+		reg |= GPIO_BIT(offset);
+	else
+		reg &= ~GPIO_BIT(offset);
+	gpio->dcache[GPIO_BANK(offset)] = reg;
+
+	iowrite32(reg, addr);
+}
+
+static void aspeed_gpio_set(struct gpio_chip *gc, unsigned int offset,
+			    int val)
+{
+	struct aspeed_gpio *gpio = gpiochip_get_data(gc);
+	unsigned long flags;
+	bool copro;
+
+	raw_spin_lock_irqsave(&gpio->lock, flags);
+	copro = aspeed_gpio_copro_request(gpio, offset);
+
+	__aspeed_gpio_set(gc, offset, val);
+
+	if (copro)
+		aspeed_gpio_copro_release(gpio, offset);
+	raw_spin_unlock_irqrestore(&gpio->lock, flags);
+}
+
+static int aspeed_gpio_dir_in(struct gpio_chip *gc, unsigned int offset)
+{
+	struct aspeed_gpio *gpio = gpiochip_get_data(gc);
+	const struct aspeed_gpio_bank *bank = to_bank(offset);
+	void __iomem *addr = bank_reg(gpio, bank, reg_dir);
+	unsigned long flags;
+	bool copro;
+	u32 reg;
+
+	if (!have_input(gpio, offset))
+		return -ENOTSUPP;
+
+	raw_spin_lock_irqsave(&gpio->lock, flags);
+
+	reg = ioread32(addr);
+	reg &= ~GPIO_BIT(offset);
+
+	copro = aspeed_gpio_copro_request(gpio, offset);
+	iowrite32(reg, addr);
+	if (copro)
+		aspeed_gpio_copro_release(gpio, offset);
+
+	raw_spin_unlock_irqrestore(&gpio->lock, flags);
+
+	return 0;
+}
+
+static int aspeed_gpio_dir_out(struct gpio_chip *gc,
+			       unsigned int offset, int val)
+{
+	struct aspeed_gpio *gpio = gpiochip_get_data(gc);
+	const struct aspeed_gpio_bank *bank = to_bank(offset);
+	void __iomem *addr = bank_reg(gpio, bank, reg_dir);
+	unsigned long flags;
+	bool copro;
+	u32 reg;
+
+	if (!have_output(gpio, offset))
+		return -ENOTSUPP;
+
+	raw_spin_lock_irqsave(&gpio->lock, flags);
+
+	reg = ioread32(addr);
+	reg |= GPIO_BIT(offset);
+
+	copro = aspeed_gpio_copro_request(gpio, offset);
+	__aspeed_gpio_set(gc, offset, val);
+	iowrite32(reg, addr);
+
+	if (copro)
+		aspeed_gpio_copro_release(gpio, offset);
+	raw_spin_unlock_irqrestore(&gpio->lock, flags);
+
+	return 0;
+}
+
+static int aspeed_gpio_get_direction(struct gpio_chip *gc, unsigned int offset)
+{
+	struct aspeed_gpio *gpio = gpiochip_get_data(gc);
+	const struct aspeed_gpio_bank *bank = to_bank(offset);
+	unsigned long flags;
+	u32 val;
+
+	if (!have_input(gpio, offset))
+		return GPIO_LINE_DIRECTION_OUT;
+
+	if (!have_output(gpio, offset))
+		return GPIO_LINE_DIRECTION_IN;
+
+	raw_spin_lock_irqsave(&gpio->lock, flags);
+
+	val = ioread32(bank_reg(gpio, bank, reg_dir)) & GPIO_BIT(offset);
+
+	raw_spin_unlock_irqrestore(&gpio->lock, flags);
+
+	return val ? GPIO_LINE_DIRECTION_OUT : GPIO_LINE_DIRECTION_IN;
+}
+
+static inline int irqd_to_aspeed_gpio_data(struct irq_data *d,
+					   struct aspeed_gpio **gpio,
+					   const struct aspeed_gpio_bank **bank,
+					   u32 *bit, int *offset)
+{
+	struct aspeed_gpio *internal;
+
+	*offset = irqd_to_hwirq(d);
+
+	internal = irq_data_get_irq_chip_data(d);
+
+	/* This might be a bit of a questionable place to check */
+	if (!have_irq(internal, *offset))
+		return -ENOTSUPP;
+
+	*gpio = internal;
+	*bank = to_bank(*offset);
+	*bit = GPIO_BIT(*offset);
+
+	return 0;
+}
+
+static void aspeed_gpio_irq_ack(struct irq_data *d)
+{
+	const struct aspeed_gpio_bank *bank;
+	struct aspeed_gpio *gpio;
+	unsigned long flags;
+	void __iomem *status_addr;
+	int rc, offset;
+	bool copro;
+	u32 bit;
+
+	rc = irqd_to_aspeed_gpio_data(d, &gpio, &bank, &bit, &offset);
+	if (rc)
+		return;
+
+	status_addr = bank_reg(gpio, bank, reg_irq_status);
+
+	raw_spin_lock_irqsave(&gpio->lock, flags);
+	copro = aspeed_gpio_copro_request(gpio, offset);
+
+	iowrite32(bit, status_addr);
+
+	if (copro)
+		aspeed_gpio_copro_release(gpio, offset);
+	raw_spin_unlock_irqrestore(&gpio->lock, flags);
+}
+
+static void aspeed_gpio_irq_set_mask(struct irq_data *d, bool set)
+{
+	const struct aspeed_gpio_bank *bank;
+	struct aspeed_gpio *gpio;
+	unsigned long flags;
+	u32 reg, bit;
+	void __iomem *addr;
+	int rc, offset;
+	bool copro;
+
+	rc = irqd_to_aspeed_gpio_data(d, &gpio, &bank, &bit, &offset);
+	if (rc)
+		return;
+
+	addr = bank_reg(gpio, bank, reg_irq_enable);
+
+	raw_spin_lock_irqsave(&gpio->lock, flags);
+	copro = aspeed_gpio_copro_request(gpio, offset);
+
+	reg = ioread32(addr);
+	if (set)
+		reg |= bit;
+	else
+		reg &= ~bit;
+	iowrite32(reg, addr);
+
+	if (copro)
+		aspeed_gpio_copro_release(gpio, offset);
+	raw_spin_unlock_irqrestore(&gpio->lock, flags);
+}
+
+static void aspeed_gpio_irq_mask(struct irq_data *d)
+{
+	aspeed_gpio_irq_set_mask(d, false);
+}
+
+static void aspeed_gpio_irq_unmask(struct irq_data *d)
+{
+	aspeed_gpio_irq_set_mask(d, true);
+}
+
+static int aspeed_gpio_set_type(struct irq_data *d, unsigned int type)
+{
+	u32 type0 = 0;
+	u32 type1 = 0;
+	u32 type2 = 0;
+	u32 bit, reg;
+	const struct aspeed_gpio_bank *bank;
+	irq_flow_handler_t handler;
+	struct aspeed_gpio *gpio;
+	unsigned long flags;
+	void __iomem *addr;
+	int rc, offset;
+	bool copro;
+
+	rc = irqd_to_aspeed_gpio_data(d, &gpio, &bank, &bit, &offset);
+	if (rc)
+		return -EINVAL;
+
+	switch (type & IRQ_TYPE_SENSE_MASK) {
+	case IRQ_TYPE_EDGE_BOTH:
+		type2 |= bit;
+		fallthrough;
+	case IRQ_TYPE_EDGE_RISING:
+		type0 |= bit;
+		fallthrough;
+	case IRQ_TYPE_EDGE_FALLING:
+		handler = handle_edge_irq;
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		type0 |= bit;
+		fallthrough;
+	case IRQ_TYPE_LEVEL_LOW:
+		type1 |= bit;
+		handler = handle_level_irq;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	raw_spin_lock_irqsave(&gpio->lock, flags);
+	copro = aspeed_gpio_copro_request(gpio, offset);
+
+	addr = bank_reg(gpio, bank, reg_irq_type0);
+	reg = ioread32(addr);
+	reg = (reg & ~bit) | type0;
+	iowrite32(reg, addr);
+
+	addr = bank_reg(gpio, bank, reg_irq_type1);
+	reg = ioread32(addr);
+	reg = (reg & ~bit) | type1;
+	iowrite32(reg, addr);
+
+	addr = bank_reg(gpio, bank, reg_irq_type2);
+	reg = ioread32(addr);
+	reg = (reg & ~bit) | type2;
+	iowrite32(reg, addr);
+
+	if (copro)
+		aspeed_gpio_copro_release(gpio, offset);
+	raw_spin_unlock_irqrestore(&gpio->lock, flags);
+
+	irq_set_handler_locked(d, handler);
+
+	return 0;
+}
+
+static void aspeed_gpio_irq_handler(struct irq_desc *desc)
+{
+	struct gpio_chip *gc = irq_desc_get_handler_data(desc);
+	struct irq_chip *ic = irq_desc_get_chip(desc);
+	struct aspeed_gpio *data = gpiochip_get_data(gc);
+	unsigned int i, p, girq, banks;
+	unsigned long reg;
+	struct aspeed_gpio *gpio = gpiochip_get_data(gc);
+
+	chained_irq_enter(ic, desc);
+
+	banks = DIV_ROUND_UP(gpio->chip.ngpio, 32);
+	for (i = 0; i < banks; i++) {
+		const struct aspeed_gpio_bank *bank = &aspeed_gpio_banks[i];
+
+		reg = ioread32(bank_reg(data, bank, reg_irq_status));
+
+		for_each_set_bit(p, &reg, 32) {
+			girq = irq_find_mapping(gc->irq.domain, i * 32 + p);
+			generic_handle_irq(girq);
+		}
+
+	}
+
+	chained_irq_exit(ic, desc);
+}
+
+static void aspeed_init_irq_valid_mask(struct gpio_chip *gc,
+				       unsigned long *valid_mask,
+				       unsigned int ngpios)
+{
+	struct aspeed_gpio *gpio = gpiochip_get_data(gc);
+	const struct aspeed_bank_props *props = gpio->config->props;
+
+	while (!is_bank_props_sentinel(props)) {
+		unsigned int offset;
+		const unsigned long int input = props->input;
+
+		/* Pretty crummy approach, but similar to GPIO core */
+		for_each_clear_bit(offset, &input, 32) {
+			unsigned int i = props->bank * 32 + offset;
+
+			if (i >= gpio->chip.ngpio)
+				break;
+
+			clear_bit(i, valid_mask);
+		}
+
+		props++;
+	}
+}
+
+static int aspeed_gpio_reset_tolerance(struct gpio_chip *chip,
+					unsigned int offset, bool enable)
+{
+	struct aspeed_gpio *gpio = gpiochip_get_data(chip);
+	unsigned long flags;
+	void __iomem *treg;
+	bool copro;
+	u32 val;
+
+	treg = bank_reg(gpio, to_bank(offset), reg_tolerance);
+
+	raw_spin_lock_irqsave(&gpio->lock, flags);
+	copro = aspeed_gpio_copro_request(gpio, offset);
+
+	val = readl(treg);
+
+	if (enable)
+		val |= GPIO_BIT(offset);
+	else
+		val &= ~GPIO_BIT(offset);
+
+	writel(val, treg);
+
+	if (copro)
+		aspeed_gpio_copro_release(gpio, offset);
+	raw_spin_unlock_irqrestore(&gpio->lock, flags);
+
+	return 0;
+}
+
+static int aspeed_gpio_request(struct gpio_chip *chip, unsigned int offset)
+{
+	if (!have_gpio(gpiochip_get_data(chip), offset))
+		return -ENODEV;
+
+	return pinctrl_gpio_request(chip->base + offset);
+}
+
+static void aspeed_gpio_free(struct gpio_chip *chip, unsigned int offset)
+{
+	pinctrl_gpio_free(chip->base + offset);
+}
+
+static int usecs_to_cycles(struct aspeed_gpio *gpio, unsigned long usecs,
+		u32 *cycles)
+{
+	u64 rate;
+	u64 n;
+	u32 r;
+
+	rate = clk_get_rate(gpio->clk);
+	if (!rate)
+		return -ENOTSUPP;
+
+	n = rate * usecs;
+	r = do_div(n, 1000000);
+
+	if (n >= U32_MAX)
+		return -ERANGE;
+
+	/* At least as long as the requested time */
+	*cycles = n + (!!r);
+
+	return 0;
+}
+
+/* Call under gpio->lock */
+static int register_allocated_timer(struct aspeed_gpio *gpio,
+		unsigned int offset, unsigned int timer)
+{
+	if (WARN(gpio->offset_timer[offset] != 0,
+				"Offset %d already allocated timer %d\n",
+				offset, gpio->offset_timer[offset]))
+		return -EINVAL;
+
+	if (WARN(gpio->timer_users[timer] == UINT_MAX,
+				"Timer user count would overflow\n"))
+		return -EPERM;
+
+	gpio->offset_timer[offset] = timer;
+	gpio->timer_users[timer]++;
+
+	return 0;
+}
+
+/* Call under gpio->lock */
+static int unregister_allocated_timer(struct aspeed_gpio *gpio,
+		unsigned int offset)
+{
+	if (WARN(gpio->offset_timer[offset] == 0,
+				"No timer allocated to offset %d\n", offset))
+		return -EINVAL;
+
+	if (WARN(gpio->timer_users[gpio->offset_timer[offset]] == 0,
+				"No users recorded for timer %d\n",
+				gpio->offset_timer[offset]))
+		return -EINVAL;
+
+	gpio->timer_users[gpio->offset_timer[offset]]--;
+	gpio->offset_timer[offset] = 0;
+
+	return 0;
+}
+
+/* Call under gpio->lock */
+static inline bool timer_allocation_registered(struct aspeed_gpio *gpio,
+		unsigned int offset)
+{
+	return gpio->offset_timer[offset] > 0;
+}
+
+/* Call under gpio->lock */
+static void configure_timer(struct aspeed_gpio *gpio, unsigned int offset,
+		unsigned int timer)
+{
+	const struct aspeed_gpio_bank *bank = to_bank(offset);
+	const u32 mask = GPIO_BIT(offset);
+	void __iomem *addr;
+	u32 val;
+
+	/* Note: Debounce timer isn't under control of the command
+	 * source registers, so no need to sync with the coprocessor
+	 */
+	addr = bank_reg(gpio, bank, reg_debounce_sel1);
+	val = ioread32(addr);
+	iowrite32((val & ~mask) | GPIO_SET_DEBOUNCE1(timer, offset), addr);
+
+	addr = bank_reg(gpio, bank, reg_debounce_sel2);
+	val = ioread32(addr);
+	iowrite32((val & ~mask) | GPIO_SET_DEBOUNCE2(timer, offset), addr);
+}
+
+static int enable_debounce(struct gpio_chip *chip, unsigned int offset,
+				    unsigned long usecs)
+{
+	struct aspeed_gpio *gpio = gpiochip_get_data(chip);
+	u32 requested_cycles;
+	unsigned long flags;
+	int rc;
+	int i;
+
+	if (!gpio->clk)
+		return -EINVAL;
+
+	rc = usecs_to_cycles(gpio, usecs, &requested_cycles);
+	if (rc < 0) {
+		dev_warn(chip->parent, "Failed to convert %luus to cycles at %luHz: %d\n",
+				usecs, clk_get_rate(gpio->clk), rc);
+		return rc;
+	}
+
+	raw_spin_lock_irqsave(&gpio->lock, flags);
+
+	if (timer_allocation_registered(gpio, offset)) {
+		rc = unregister_allocated_timer(gpio, offset);
+		if (rc < 0)
+			goto out;
+	}
+
+	/* Try to find a timer already configured for the debounce period */
+	for (i = 1; i < ARRAY_SIZE(debounce_timers); i++) {
+		u32 cycles;
+
+		cycles = ioread32(gpio->base + debounce_timers[i]);
+		if (requested_cycles == cycles)
+			break;
+	}
+
+	if (i == ARRAY_SIZE(debounce_timers)) {
+		int j;
+
+		/*
+		 * As there are no timers configured for the requested debounce
+		 * period, find an unused timer instead
+		 */
+		for (j = 1; j < ARRAY_SIZE(gpio->timer_users); j++) {
+			if (gpio->timer_users[j] == 0)
+				break;
+		}
+
+		if (j == ARRAY_SIZE(gpio->timer_users)) {
+			dev_warn(chip->parent,
+					"Debounce timers exhausted, cannot debounce for period %luus\n",
+					usecs);
+
+			rc = -EPERM;
+
+			/*
+			 * We already adjusted the accounting to remove @offset
+			 * as a user of its previous timer, so also configure
+			 * the hardware so @offset has timers disabled for
+			 * consistency.
+			 */
+			configure_timer(gpio, offset, 0);
+			goto out;
+		}
+
+		i = j;
+
+		iowrite32(requested_cycles, gpio->base + debounce_timers[i]);
+	}
+
+	if (WARN(i == 0, "Cannot register index of disabled timer\n")) {
+		rc = -EINVAL;
+		goto out;
+	}
+
+	register_allocated_timer(gpio, offset, i);
+	configure_timer(gpio, offset, i);
+
+out:
+	raw_spin_unlock_irqrestore(&gpio->lock, flags);
+
+	return rc;
+}
+
+static int disable_debounce(struct gpio_chip *chip, unsigned int offset)
+{
+	struct aspeed_gpio *gpio = gpiochip_get_data(chip);
+	unsigned long flags;
+	int rc;
+
+	raw_spin_lock_irqsave(&gpio->lock, flags);
+
+	rc = unregister_allocated_timer(gpio, offset);
+	if (!rc)
+		configure_timer(gpio, offset, 0);
+
+	raw_spin_unlock_irqrestore(&gpio->lock, flags);
+
+	return rc;
+}
+
+static int set_debounce(struct gpio_chip *chip, unsigned int offset,
+				    unsigned long usecs)
+{
+	struct aspeed_gpio *gpio = gpiochip_get_data(chip);
+
+	if (!have_debounce(gpio, offset))
+		return -ENOTSUPP;
+
+	if (usecs)
+		return enable_debounce(chip, offset, usecs);
+
+	return disable_debounce(chip, offset);
+}
+
+static int aspeed_gpio_set_config(struct gpio_chip *chip, unsigned int offset,
+				  unsigned long config)
+{
+	unsigned long param = pinconf_to_config_param(config);
+	u32 arg = pinconf_to_config_argument(config);
+
+	if (param == PIN_CONFIG_INPUT_DEBOUNCE)
+		return set_debounce(chip, offset, arg);
+	else if (param == PIN_CONFIG_BIAS_DISABLE ||
+			param == PIN_CONFIG_BIAS_PULL_DOWN ||
+			param == PIN_CONFIG_DRIVE_STRENGTH)
+		return pinctrl_gpio_set_config(chip->base + offset, config);
+	else if (param == PIN_CONFIG_DRIVE_OPEN_DRAIN ||
+			param == PIN_CONFIG_DRIVE_OPEN_SOURCE)
+		/* Return -ENOTSUPP to trigger emulation, as per datasheet */
+		return -ENOTSUPP;
+	else if (param == PIN_CONFIG_PERSIST_STATE)
+		return aspeed_gpio_reset_tolerance(chip, offset, arg);
+
+	return -ENOTSUPP;
+}
+
+/**
+ * aspeed_gpio_copro_set_ops - Sets the callbacks used for handshaking with
+ *                             the coprocessor for shared GPIO banks
+ * @ops: The callbacks
+ * @data: Pointer passed back to the callbacks
+ */
+int aspeed_gpio_copro_set_ops(const struct aspeed_gpio_copro_ops *ops, void *data)
+{
+	copro_data = data;
+	copro_ops = ops;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(aspeed_gpio_copro_set_ops);
+
+/**
+ * aspeed_gpio_copro_grab_gpio - Mark a GPIO used by the coprocessor. The entire
+ *                               bank gets marked and any access from the ARM will
+ *                               result in handshaking via callbacks.
+ * @desc: The GPIO to be marked
+ * @vreg_offset: If non-NULL, returns the value register offset in the GPIO space
+ * @dreg_offset: If non-NULL, returns the data latch register offset in the GPIO space
+ * @bit: If non-NULL, returns the bit number of the GPIO in the registers
+ */
+int aspeed_gpio_copro_grab_gpio(struct gpio_desc *desc,
+				u16 *vreg_offset, u16 *dreg_offset, u8 *bit)
+{
+	struct gpio_chip *chip = gpiod_to_chip(desc);
+	struct aspeed_gpio *gpio = gpiochip_get_data(chip);
+	int rc = 0, bindex, offset = gpio_chip_hwgpio(desc);
+	const struct aspeed_gpio_bank *bank = to_bank(offset);
+	unsigned long flags;
+
+	if (!gpio->cf_copro_bankmap)
+		gpio->cf_copro_bankmap = kzalloc(gpio->chip.ngpio >> 3, GFP_KERNEL);
+	if (!gpio->cf_copro_bankmap)
+		return -ENOMEM;
+	if (offset < 0 || offset > gpio->chip.ngpio)
+		return -EINVAL;
+	bindex = offset >> 3;
+
+	raw_spin_lock_irqsave(&gpio->lock, flags);
+
+	/* Sanity check, this shouldn't happen */
+	if (gpio->cf_copro_bankmap[bindex] == 0xff) {
+		rc = -EIO;
+		goto bail;
+	}
+	gpio->cf_copro_bankmap[bindex]++;
+
+	/* Switch command source */
+	if (gpio->cf_copro_bankmap[bindex] == 1)
+		aspeed_gpio_change_cmd_source(gpio, bank, bindex,
+					      GPIO_CMDSRC_COLDFIRE);
+
+	if (vreg_offset)
+		*vreg_offset = bank->val_regs;
+	if (dreg_offset)
+		*dreg_offset = bank->rdata_reg;
+	if (bit)
+		*bit = GPIO_OFFSET(offset);
+ bail:
+	raw_spin_unlock_irqrestore(&gpio->lock, flags);
+	return rc;
+}
+EXPORT_SYMBOL_GPL(aspeed_gpio_copro_grab_gpio);
+
+/**
+ * aspeed_gpio_copro_release_gpio - Unmark a GPIO used by the coprocessor.
+ * @desc: The GPIO to be marked
+ */
+int aspeed_gpio_copro_release_gpio(struct gpio_desc *desc)
+{
+	struct gpio_chip *chip = gpiod_to_chip(desc);
+	struct aspeed_gpio *gpio = gpiochip_get_data(chip);
+	int rc = 0, bindex, offset = gpio_chip_hwgpio(desc);
+	const struct aspeed_gpio_bank *bank = to_bank(offset);
+	unsigned long flags;
+
+	if (!gpio->cf_copro_bankmap)
+		return -ENXIO;
+
+	if (offset < 0 || offset > gpio->chip.ngpio)
+		return -EINVAL;
+	bindex = offset >> 3;
+
+	raw_spin_lock_irqsave(&gpio->lock, flags);
+
+	/* Sanity check, this shouldn't happen */
+	if (gpio->cf_copro_bankmap[bindex] == 0) {
+		rc = -EIO;
+		goto bail;
+	}
+	gpio->cf_copro_bankmap[bindex]--;
+
+	/* Switch command source */
+	if (gpio->cf_copro_bankmap[bindex] == 0)
+		aspeed_gpio_change_cmd_source(gpio, bank, bindex,
+					      GPIO_CMDSRC_ARM);
+ bail:
+	raw_spin_unlock_irqrestore(&gpio->lock, flags);
+	return rc;
+}
+EXPORT_SYMBOL_GPL(aspeed_gpio_copro_release_gpio);
+
+/*
+ * Any banks not specified in a struct aspeed_bank_props array are assumed to
+ * have the properties:
+ *
+ *     { .input = 0xffffffff, .output = 0xffffffff }
+ */
+
+static const struct aspeed_bank_props ast2400_bank_props[] = {
+	/*     input	  output   */
+	{ 5, 0xffffffff, 0x0000ffff }, /* U/V/W/X */
+	{ 6, 0x0000000f, 0x0fffff0f }, /* Y/Z/AA/AB, two 4-GPIO holes */
+	{ },
+};
+
+static const struct aspeed_gpio_config ast2400_config =
+	/* 220 for simplicity, really 216 with two 4-GPIO holes, four at end */
+	{ .nr_gpios = 220, .props = ast2400_bank_props, };
+
+static const struct aspeed_bank_props ast2500_bank_props[] = {
+	/*     input	  output   */
+	{ 5, 0xffffffff, 0x0000ffff }, /* U/V/W/X */
+	{ 6, 0x0fffffff, 0x0fffffff }, /* Y/Z/AA/AB, 4-GPIO hole */
+	{ 7, 0x000000ff, 0x000000ff }, /* AC */
+	{ },
+};
+
+static const struct aspeed_gpio_config ast2500_config =
+	/* 232 for simplicity, actual number is 228 (4-GPIO hole in GPIOAB) */
+	{ .nr_gpios = 232, .props = ast2500_bank_props, };
+
+static const struct aspeed_bank_props ast2600_bank_props[] = {
+	/*     input	  output   */
+	{4, 0xffffffff,  0x00ffffff}, /* Q/R/S/T */
+	{5, 0xffffffff,  0xffffff00}, /* U/V/W/X */
+	{6, 0x0000ffff,  0x0000ffff}, /* Y/Z */
+	{ },
+};
+
+static const struct aspeed_gpio_config ast2600_config =
+	/*
+	 * ast2600 has two controllers one with 208 GPIOs and one with 36 GPIOs.
+	 * We expect ngpio being set in the device tree and this is a fallback
+	 * option.
+	 */
+	{ .nr_gpios = 208, .props = ast2600_bank_props, };
+
+static const struct of_device_id aspeed_gpio_of_table[] = {
+	{ .compatible = "aspeed,ast2400-gpio", .data = &ast2400_config, },
+	{ .compatible = "aspeed,ast2500-gpio", .data = &ast2500_config, },
+	{ .compatible = "aspeed,ast2600-gpio", .data = &ast2600_config, },
+	{}
+};
+MODULE_DEVICE_TABLE(of, aspeed_gpio_of_table);
+
+static int __init aspeed_gpio_probe(struct platform_device *pdev)
+{
+	const struct of_device_id *gpio_id;
+	struct aspeed_gpio *gpio;
+	int rc, i, banks, err;
+	u32 ngpio;
+
+	gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
+	if (!gpio)
+		return -ENOMEM;
+
+	gpio->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(gpio->base))
+		return PTR_ERR(gpio->base);
+
+	raw_spin_lock_init(&gpio->lock);
+
+	gpio_id = of_match_node(aspeed_gpio_of_table, pdev->dev.of_node);
+	if (!gpio_id)
+		return -EINVAL;
+
+	gpio->clk = of_clk_get(pdev->dev.of_node, 0);
+	if (IS_ERR(gpio->clk)) {
+		dev_warn(&pdev->dev,
+				"Failed to get clock from devicetree, debouncing disabled\n");
+		gpio->clk = NULL;
+	}
+
+	gpio->config = gpio_id->data;
+
+	gpio->chip.parent = &pdev->dev;
+	err = of_property_read_u32(pdev->dev.of_node, "ngpios", &ngpio);
+	gpio->chip.ngpio = (u16) ngpio;
+	if (err)
+		gpio->chip.ngpio = gpio->config->nr_gpios;
+	gpio->chip.direction_input = aspeed_gpio_dir_in;
+	gpio->chip.direction_output = aspeed_gpio_dir_out;
+	gpio->chip.get_direction = aspeed_gpio_get_direction;
+	gpio->chip.request = aspeed_gpio_request;
+	gpio->chip.free = aspeed_gpio_free;
+	gpio->chip.get = aspeed_gpio_get;
+	gpio->chip.set = aspeed_gpio_set;
+	gpio->chip.set_config = aspeed_gpio_set_config;
+	gpio->chip.label = dev_name(&pdev->dev);
+	gpio->chip.base = -1;
+
+	/* Allocate a cache of the output registers */
+	banks = DIV_ROUND_UP(gpio->chip.ngpio, 32);
+	gpio->dcache = devm_kcalloc(&pdev->dev,
+				    banks, sizeof(u32), GFP_KERNEL);
+	if (!gpio->dcache)
+		return -ENOMEM;
+
+	/*
+	 * Populate it with initial values read from the HW and switch
+	 * all command sources to the ARM by default
+	 */
+	for (i = 0; i < banks; i++) {
+		const struct aspeed_gpio_bank *bank = &aspeed_gpio_banks[i];
+		void __iomem *addr = bank_reg(gpio, bank, reg_rdata);
+		gpio->dcache[i] = ioread32(addr);
+		aspeed_gpio_change_cmd_source(gpio, bank, 0, GPIO_CMDSRC_ARM);
+		aspeed_gpio_change_cmd_source(gpio, bank, 1, GPIO_CMDSRC_ARM);
+		aspeed_gpio_change_cmd_source(gpio, bank, 2, GPIO_CMDSRC_ARM);
+		aspeed_gpio_change_cmd_source(gpio, bank, 3, GPIO_CMDSRC_ARM);
+	}
+
+	/* Optionally set up an irqchip if there is an IRQ */
+	rc = platform_get_irq(pdev, 0);
+	if (rc > 0) {
+		struct gpio_irq_chip *girq;
+
+		gpio->irq = rc;
+		girq = &gpio->chip.irq;
+		girq->chip = &gpio->irqc;
+		girq->chip->name = dev_name(&pdev->dev);
+		girq->chip->irq_ack = aspeed_gpio_irq_ack;
+		girq->chip->irq_mask = aspeed_gpio_irq_mask;
+		girq->chip->irq_unmask = aspeed_gpio_irq_unmask;
+		girq->chip->irq_set_type = aspeed_gpio_set_type;
+		girq->parent_handler = aspeed_gpio_irq_handler;
+		girq->num_parents = 1;
+		girq->parents = devm_kcalloc(&pdev->dev, 1,
+					     sizeof(*girq->parents),
+					     GFP_KERNEL);
+		if (!girq->parents)
+			return -ENOMEM;
+		girq->parents[0] = gpio->irq;
+		girq->default_type = IRQ_TYPE_NONE;
+		girq->handler = handle_bad_irq;
+		girq->init_valid_mask = aspeed_init_irq_valid_mask;
+	}
+
+	gpio->offset_timer =
+		devm_kzalloc(&pdev->dev, gpio->chip.ngpio, GFP_KERNEL);
+	if (!gpio->offset_timer)
+		return -ENOMEM;
+
+	rc = devm_gpiochip_add_data(&pdev->dev, &gpio->chip, gpio);
+	if (rc < 0)
+		return rc;
+
+	return 0;
+}
+
+static struct platform_driver aspeed_gpio_driver = {
+	.driver = {
+		.name = KBUILD_MODNAME,
+		.of_match_table = aspeed_gpio_of_table,
+	},
+};
+
+module_platform_driver_probe(aspeed_gpio_driver, aspeed_gpio_probe);
+
+MODULE_DESCRIPTION("Aspeed GPIO Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/gpio-ath79.c b/drivers/gpio/gpio-ath79.c
new file mode 100644
index 000000000..d5359341c
--- /dev/null
+++ b/drivers/gpio/gpio-ath79.c
@@ -0,0 +1,312 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Atheros AR71XX/AR724X/AR913X GPIO API support
+ *
+ *  Copyright (C) 2015 Alban Bedel <albeu@free.fr>
+ *  Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
+ *  Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ */
+
+#include <linux/gpio/driver.h>
+#include <linux/platform_data/gpio-ath79.h>
+#include <linux/of_device.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/irq.h>
+
+#define AR71XX_GPIO_REG_OE		0x00
+#define AR71XX_GPIO_REG_IN		0x04
+#define AR71XX_GPIO_REG_SET		0x0c
+#define AR71XX_GPIO_REG_CLEAR		0x10
+
+#define AR71XX_GPIO_REG_INT_ENABLE	0x14
+#define AR71XX_GPIO_REG_INT_TYPE	0x18
+#define AR71XX_GPIO_REG_INT_POLARITY	0x1c
+#define AR71XX_GPIO_REG_INT_PENDING	0x20
+#define AR71XX_GPIO_REG_INT_MASK	0x24
+
+struct ath79_gpio_ctrl {
+	struct gpio_chip gc;
+	void __iomem *base;
+	raw_spinlock_t lock;
+	unsigned long both_edges;
+};
+
+static struct ath79_gpio_ctrl *irq_data_to_ath79_gpio(struct irq_data *data)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(data);
+
+	return container_of(gc, struct ath79_gpio_ctrl, gc);
+}
+
+static u32 ath79_gpio_read(struct ath79_gpio_ctrl *ctrl, unsigned reg)
+{
+	return readl(ctrl->base + reg);
+}
+
+static void ath79_gpio_write(struct ath79_gpio_ctrl *ctrl,
+			unsigned reg, u32 val)
+{
+	writel(val, ctrl->base + reg);
+}
+
+static bool ath79_gpio_update_bits(
+	struct ath79_gpio_ctrl *ctrl, unsigned reg, u32 mask, u32 bits)
+{
+	u32 old_val, new_val;
+
+	old_val = ath79_gpio_read(ctrl, reg);
+	new_val = (old_val & ~mask) | (bits & mask);
+
+	if (new_val != old_val)
+		ath79_gpio_write(ctrl, reg, new_val);
+
+	return new_val != old_val;
+}
+
+static void ath79_gpio_irq_unmask(struct irq_data *data)
+{
+	struct ath79_gpio_ctrl *ctrl = irq_data_to_ath79_gpio(data);
+	u32 mask = BIT(irqd_to_hwirq(data));
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&ctrl->lock, flags);
+	ath79_gpio_update_bits(ctrl, AR71XX_GPIO_REG_INT_MASK, mask, mask);
+	raw_spin_unlock_irqrestore(&ctrl->lock, flags);
+}
+
+static void ath79_gpio_irq_mask(struct irq_data *data)
+{
+	struct ath79_gpio_ctrl *ctrl = irq_data_to_ath79_gpio(data);
+	u32 mask = BIT(irqd_to_hwirq(data));
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&ctrl->lock, flags);
+	ath79_gpio_update_bits(ctrl, AR71XX_GPIO_REG_INT_MASK, mask, 0);
+	raw_spin_unlock_irqrestore(&ctrl->lock, flags);
+}
+
+static void ath79_gpio_irq_enable(struct irq_data *data)
+{
+	struct ath79_gpio_ctrl *ctrl = irq_data_to_ath79_gpio(data);
+	u32 mask = BIT(irqd_to_hwirq(data));
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&ctrl->lock, flags);
+	ath79_gpio_update_bits(ctrl, AR71XX_GPIO_REG_INT_ENABLE, mask, mask);
+	ath79_gpio_update_bits(ctrl, AR71XX_GPIO_REG_INT_MASK, mask, mask);
+	raw_spin_unlock_irqrestore(&ctrl->lock, flags);
+}
+
+static void ath79_gpio_irq_disable(struct irq_data *data)
+{
+	struct ath79_gpio_ctrl *ctrl = irq_data_to_ath79_gpio(data);
+	u32 mask = BIT(irqd_to_hwirq(data));
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&ctrl->lock, flags);
+	ath79_gpio_update_bits(ctrl, AR71XX_GPIO_REG_INT_MASK, mask, 0);
+	ath79_gpio_update_bits(ctrl, AR71XX_GPIO_REG_INT_ENABLE, mask, 0);
+	raw_spin_unlock_irqrestore(&ctrl->lock, flags);
+}
+
+static int ath79_gpio_irq_set_type(struct irq_data *data,
+				unsigned int flow_type)
+{
+	struct ath79_gpio_ctrl *ctrl = irq_data_to_ath79_gpio(data);
+	u32 mask = BIT(irqd_to_hwirq(data));
+	u32 type = 0, polarity = 0;
+	unsigned long flags;
+	bool disabled;
+
+	switch (flow_type) {
+	case IRQ_TYPE_EDGE_RISING:
+		polarity |= mask;
+	case IRQ_TYPE_EDGE_FALLING:
+	case IRQ_TYPE_EDGE_BOTH:
+		break;
+
+	case IRQ_TYPE_LEVEL_HIGH:
+		polarity |= mask;
+		fallthrough;
+	case IRQ_TYPE_LEVEL_LOW:
+		type |= mask;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	raw_spin_lock_irqsave(&ctrl->lock, flags);
+
+	if (flow_type == IRQ_TYPE_EDGE_BOTH) {
+		ctrl->both_edges |= mask;
+		polarity = ~ath79_gpio_read(ctrl, AR71XX_GPIO_REG_IN);
+	} else {
+		ctrl->both_edges &= ~mask;
+	}
+
+	/* As the IRQ configuration can't be loaded atomically we
+	 * have to disable the interrupt while the configuration state
+	 * is invalid.
+	 */
+	disabled = ath79_gpio_update_bits(
+		ctrl, AR71XX_GPIO_REG_INT_ENABLE, mask, 0);
+
+	ath79_gpio_update_bits(
+		ctrl, AR71XX_GPIO_REG_INT_TYPE, mask, type);
+	ath79_gpio_update_bits(
+		ctrl, AR71XX_GPIO_REG_INT_POLARITY, mask, polarity);
+
+	if (disabled)
+		ath79_gpio_update_bits(
+			ctrl, AR71XX_GPIO_REG_INT_ENABLE, mask, mask);
+
+	raw_spin_unlock_irqrestore(&ctrl->lock, flags);
+
+	return 0;
+}
+
+static struct irq_chip ath79_gpio_irqchip = {
+	.name = "gpio-ath79",
+	.irq_enable = ath79_gpio_irq_enable,
+	.irq_disable = ath79_gpio_irq_disable,
+	.irq_mask = ath79_gpio_irq_mask,
+	.irq_unmask = ath79_gpio_irq_unmask,
+	.irq_set_type = ath79_gpio_irq_set_type,
+};
+
+static void ath79_gpio_irq_handler(struct irq_desc *desc)
+{
+	struct gpio_chip *gc = irq_desc_get_handler_data(desc);
+	struct irq_chip *irqchip = irq_desc_get_chip(desc);
+	struct ath79_gpio_ctrl *ctrl =
+		container_of(gc, struct ath79_gpio_ctrl, gc);
+	unsigned long flags, pending;
+	u32 both_edges, state;
+	int irq;
+
+	chained_irq_enter(irqchip, desc);
+
+	raw_spin_lock_irqsave(&ctrl->lock, flags);
+
+	pending = ath79_gpio_read(ctrl, AR71XX_GPIO_REG_INT_PENDING);
+
+	/* Update the polarity of the both edges irqs */
+	both_edges = ctrl->both_edges & pending;
+	if (both_edges) {
+		state = ath79_gpio_read(ctrl, AR71XX_GPIO_REG_IN);
+		ath79_gpio_update_bits(ctrl, AR71XX_GPIO_REG_INT_POLARITY,
+				both_edges, ~state);
+	}
+
+	raw_spin_unlock_irqrestore(&ctrl->lock, flags);
+
+	if (pending) {
+		for_each_set_bit(irq, &pending, gc->ngpio)
+			generic_handle_irq(
+				irq_linear_revmap(gc->irq.domain, irq));
+	}
+
+	chained_irq_exit(irqchip, desc);
+}
+
+static const struct of_device_id ath79_gpio_of_match[] = {
+	{ .compatible = "qca,ar7100-gpio" },
+	{ .compatible = "qca,ar9340-gpio" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, ath79_gpio_of_match);
+
+static int ath79_gpio_probe(struct platform_device *pdev)
+{
+	struct ath79_gpio_platform_data *pdata = dev_get_platdata(&pdev->dev);
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct ath79_gpio_ctrl *ctrl;
+	struct gpio_irq_chip *girq;
+	u32 ath79_gpio_count;
+	bool oe_inverted;
+	int err;
+
+	ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
+	if (!ctrl)
+		return -ENOMEM;
+	platform_set_drvdata(pdev, ctrl);
+
+	if (np) {
+		err = of_property_read_u32(np, "ngpios", &ath79_gpio_count);
+		if (err) {
+			dev_err(dev, "ngpios property is not valid\n");
+			return err;
+		}
+		oe_inverted = of_device_is_compatible(np, "qca,ar9340-gpio");
+	} else if (pdata) {
+		ath79_gpio_count = pdata->ngpios;
+		oe_inverted = pdata->oe_inverted;
+	} else {
+		dev_err(dev, "No DT node or platform data found\n");
+		return -EINVAL;
+	}
+
+	if (ath79_gpio_count >= 32) {
+		dev_err(dev, "ngpios must be less than 32\n");
+		return -EINVAL;
+	}
+
+	ctrl->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(ctrl->base))
+		return PTR_ERR(ctrl->base);
+
+	raw_spin_lock_init(&ctrl->lock);
+	err = bgpio_init(&ctrl->gc, dev, 4,
+			ctrl->base + AR71XX_GPIO_REG_IN,
+			ctrl->base + AR71XX_GPIO_REG_SET,
+			ctrl->base + AR71XX_GPIO_REG_CLEAR,
+			oe_inverted ? NULL : ctrl->base + AR71XX_GPIO_REG_OE,
+			oe_inverted ? ctrl->base + AR71XX_GPIO_REG_OE : NULL,
+			0);
+	if (err) {
+		dev_err(dev, "bgpio_init failed\n");
+		return err;
+	}
+	/* Use base 0 to stay compatible with legacy platforms */
+	ctrl->gc.base = 0;
+
+	/* Optional interrupt setup */
+	if (!np || of_property_read_bool(np, "interrupt-controller")) {
+		girq = &ctrl->gc.irq;
+		girq->chip = &ath79_gpio_irqchip;
+		girq->parent_handler = ath79_gpio_irq_handler;
+		girq->num_parents = 1;
+		girq->parents = devm_kcalloc(dev, 1, sizeof(*girq->parents),
+					     GFP_KERNEL);
+		if (!girq->parents)
+			return -ENOMEM;
+		girq->parents[0] = platform_get_irq(pdev, 0);
+		girq->default_type = IRQ_TYPE_NONE;
+		girq->handler = handle_simple_irq;
+	}
+
+	err = devm_gpiochip_add_data(dev, &ctrl->gc, ctrl);
+	if (err) {
+		dev_err(dev,
+			"cannot add AR71xx GPIO chip, error=%d", err);
+		return err;
+	}
+	return 0;
+}
+
+static struct platform_driver ath79_gpio_driver = {
+	.driver = {
+		.name = "ath79-gpio",
+		.of_match_table	= ath79_gpio_of_match,
+	},
+	.probe = ath79_gpio_probe,
+};
+
+module_platform_driver(ath79_gpio_driver);
+
+MODULE_DESCRIPTION("Atheros AR71XX/AR724X/AR913X GPIO API support");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-bcm-kona.c b/drivers/gpio/gpio-bcm-kona.c
new file mode 100644
index 000000000..1e6b427f2
--- /dev/null
+++ b/drivers/gpio/gpio-bcm-kona.c
@@ -0,0 +1,674 @@
+/*
+ * Broadcom Kona GPIO Driver
+ *
+ * Author: Broadcom Corporation <bcm-kernel-feedback-list@broadcom.com>
+ * Copyright (C) 2012-2014 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/bitops.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/gpio/driver.h>
+#include <linux/of_device.h>
+#include <linux/init.h>
+#include <linux/irqdomain.h>
+#include <linux/irqchip/chained_irq.h>
+
+#define BCM_GPIO_PASSWD				0x00a5a501
+#define GPIO_PER_BANK				32
+#define GPIO_MAX_BANK_NUM			8
+
+#define GPIO_BANK(gpio)				((gpio) >> 5)
+#define GPIO_BIT(gpio)				((gpio) & (GPIO_PER_BANK - 1))
+
+/* There is a GPIO control register for each GPIO */
+#define GPIO_CONTROL(gpio)			(0x00000100 + ((gpio) << 2))
+
+/* The remaining registers are per GPIO bank */
+#define GPIO_OUT_STATUS(bank)			(0x00000000 + ((bank) << 2))
+#define GPIO_IN_STATUS(bank)			(0x00000020 + ((bank) << 2))
+#define GPIO_OUT_SET(bank)			(0x00000040 + ((bank) << 2))
+#define GPIO_OUT_CLEAR(bank)			(0x00000060 + ((bank) << 2))
+#define GPIO_INT_STATUS(bank)			(0x00000080 + ((bank) << 2))
+#define GPIO_INT_MASK(bank)			(0x000000a0 + ((bank) << 2))
+#define GPIO_INT_MSKCLR(bank)			(0x000000c0 + ((bank) << 2))
+#define GPIO_PWD_STATUS(bank)			(0x00000500 + ((bank) << 2))
+
+#define GPIO_GPPWR_OFFSET			0x00000520
+
+#define GPIO_GPCTR0_DBR_SHIFT			5
+#define GPIO_GPCTR0_DBR_MASK			0x000001e0
+
+#define GPIO_GPCTR0_ITR_SHIFT			3
+#define GPIO_GPCTR0_ITR_MASK			0x00000018
+#define GPIO_GPCTR0_ITR_CMD_RISING_EDGE		0x00000001
+#define GPIO_GPCTR0_ITR_CMD_FALLING_EDGE	0x00000002
+#define GPIO_GPCTR0_ITR_CMD_BOTH_EDGE		0x00000003
+
+#define GPIO_GPCTR0_IOTR_MASK			0x00000001
+#define GPIO_GPCTR0_IOTR_CMD_0UTPUT		0x00000000
+#define GPIO_GPCTR0_IOTR_CMD_INPUT		0x00000001
+
+#define GPIO_GPCTR0_DB_ENABLE_MASK		0x00000100
+
+#define LOCK_CODE				0xffffffff
+#define UNLOCK_CODE				0x00000000
+
+struct bcm_kona_gpio {
+	void __iomem *reg_base;
+	int num_bank;
+	raw_spinlock_t lock;
+	struct gpio_chip gpio_chip;
+	struct irq_domain *irq_domain;
+	struct bcm_kona_gpio_bank *banks;
+	struct platform_device *pdev;
+};
+
+struct bcm_kona_gpio_bank {
+	int id;
+	int irq;
+	/* Used in the interrupt handler */
+	struct bcm_kona_gpio *kona_gpio;
+};
+
+static inline void bcm_kona_gpio_write_lock_regs(void __iomem *reg_base,
+						int bank_id, u32 lockcode)
+{
+	writel(BCM_GPIO_PASSWD, reg_base + GPIO_GPPWR_OFFSET);
+	writel(lockcode, reg_base + GPIO_PWD_STATUS(bank_id));
+}
+
+static void bcm_kona_gpio_lock_gpio(struct bcm_kona_gpio *kona_gpio,
+					unsigned gpio)
+{
+	u32 val;
+	unsigned long flags;
+	int bank_id = GPIO_BANK(gpio);
+
+	raw_spin_lock_irqsave(&kona_gpio->lock, flags);
+
+	val = readl(kona_gpio->reg_base + GPIO_PWD_STATUS(bank_id));
+	val |= BIT(gpio);
+	bcm_kona_gpio_write_lock_regs(kona_gpio->reg_base, bank_id, val);
+
+	raw_spin_unlock_irqrestore(&kona_gpio->lock, flags);
+}
+
+static void bcm_kona_gpio_unlock_gpio(struct bcm_kona_gpio *kona_gpio,
+					unsigned gpio)
+{
+	u32 val;
+	unsigned long flags;
+	int bank_id = GPIO_BANK(gpio);
+
+	raw_spin_lock_irqsave(&kona_gpio->lock, flags);
+
+	val = readl(kona_gpio->reg_base + GPIO_PWD_STATUS(bank_id));
+	val &= ~BIT(gpio);
+	bcm_kona_gpio_write_lock_regs(kona_gpio->reg_base, bank_id, val);
+
+	raw_spin_unlock_irqrestore(&kona_gpio->lock, flags);
+}
+
+static int bcm_kona_gpio_get_dir(struct gpio_chip *chip, unsigned gpio)
+{
+	struct bcm_kona_gpio *kona_gpio = gpiochip_get_data(chip);
+	void __iomem *reg_base = kona_gpio->reg_base;
+	u32 val;
+
+	val = readl(reg_base + GPIO_CONTROL(gpio)) & GPIO_GPCTR0_IOTR_MASK;
+	return val ? GPIO_LINE_DIRECTION_IN : GPIO_LINE_DIRECTION_OUT;
+}
+
+static void bcm_kona_gpio_set(struct gpio_chip *chip, unsigned gpio, int value)
+{
+	struct bcm_kona_gpio *kona_gpio;
+	void __iomem *reg_base;
+	int bank_id = GPIO_BANK(gpio);
+	int bit = GPIO_BIT(gpio);
+	u32 val, reg_offset;
+	unsigned long flags;
+
+	kona_gpio = gpiochip_get_data(chip);
+	reg_base = kona_gpio->reg_base;
+	raw_spin_lock_irqsave(&kona_gpio->lock, flags);
+
+	/* this function only applies to output pin */
+	if (bcm_kona_gpio_get_dir(chip, gpio) == GPIO_LINE_DIRECTION_IN)
+		goto out;
+
+	reg_offset = value ? GPIO_OUT_SET(bank_id) : GPIO_OUT_CLEAR(bank_id);
+
+	val = readl(reg_base + reg_offset);
+	val |= BIT(bit);
+	writel(val, reg_base + reg_offset);
+
+out:
+	raw_spin_unlock_irqrestore(&kona_gpio->lock, flags);
+}
+
+static int bcm_kona_gpio_get(struct gpio_chip *chip, unsigned gpio)
+{
+	struct bcm_kona_gpio *kona_gpio;
+	void __iomem *reg_base;
+	int bank_id = GPIO_BANK(gpio);
+	int bit = GPIO_BIT(gpio);
+	u32 val, reg_offset;
+	unsigned long flags;
+
+	kona_gpio = gpiochip_get_data(chip);
+	reg_base = kona_gpio->reg_base;
+	raw_spin_lock_irqsave(&kona_gpio->lock, flags);
+
+	if (bcm_kona_gpio_get_dir(chip, gpio) == GPIO_LINE_DIRECTION_IN)
+		reg_offset = GPIO_IN_STATUS(bank_id);
+	else
+		reg_offset = GPIO_OUT_STATUS(bank_id);
+
+	/* read the GPIO bank status */
+	val = readl(reg_base + reg_offset);
+
+	raw_spin_unlock_irqrestore(&kona_gpio->lock, flags);
+
+	/* return the specified bit status */
+	return !!(val & BIT(bit));
+}
+
+static int bcm_kona_gpio_request(struct gpio_chip *chip, unsigned gpio)
+{
+	struct bcm_kona_gpio *kona_gpio = gpiochip_get_data(chip);
+
+	bcm_kona_gpio_unlock_gpio(kona_gpio, gpio);
+	return 0;
+}
+
+static void bcm_kona_gpio_free(struct gpio_chip *chip, unsigned gpio)
+{
+	struct bcm_kona_gpio *kona_gpio = gpiochip_get_data(chip);
+
+	bcm_kona_gpio_lock_gpio(kona_gpio, gpio);
+}
+
+static int bcm_kona_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
+{
+	struct bcm_kona_gpio *kona_gpio;
+	void __iomem *reg_base;
+	u32 val;
+	unsigned long flags;
+
+	kona_gpio = gpiochip_get_data(chip);
+	reg_base = kona_gpio->reg_base;
+	raw_spin_lock_irqsave(&kona_gpio->lock, flags);
+
+	val = readl(reg_base + GPIO_CONTROL(gpio));
+	val &= ~GPIO_GPCTR0_IOTR_MASK;
+	val |= GPIO_GPCTR0_IOTR_CMD_INPUT;
+	writel(val, reg_base + GPIO_CONTROL(gpio));
+
+	raw_spin_unlock_irqrestore(&kona_gpio->lock, flags);
+
+	return 0;
+}
+
+static int bcm_kona_gpio_direction_output(struct gpio_chip *chip,
+					  unsigned gpio, int value)
+{
+	struct bcm_kona_gpio *kona_gpio;
+	void __iomem *reg_base;
+	int bank_id = GPIO_BANK(gpio);
+	int bit = GPIO_BIT(gpio);
+	u32 val, reg_offset;
+	unsigned long flags;
+
+	kona_gpio = gpiochip_get_data(chip);
+	reg_base = kona_gpio->reg_base;
+	raw_spin_lock_irqsave(&kona_gpio->lock, flags);
+
+	val = readl(reg_base + GPIO_CONTROL(gpio));
+	val &= ~GPIO_GPCTR0_IOTR_MASK;
+	val |= GPIO_GPCTR0_IOTR_CMD_0UTPUT;
+	writel(val, reg_base + GPIO_CONTROL(gpio));
+	reg_offset = value ? GPIO_OUT_SET(bank_id) : GPIO_OUT_CLEAR(bank_id);
+
+	val = readl(reg_base + reg_offset);
+	val |= BIT(bit);
+	writel(val, reg_base + reg_offset);
+
+	raw_spin_unlock_irqrestore(&kona_gpio->lock, flags);
+
+	return 0;
+}
+
+static int bcm_kona_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
+{
+	struct bcm_kona_gpio *kona_gpio;
+
+	kona_gpio = gpiochip_get_data(chip);
+	if (gpio >= kona_gpio->gpio_chip.ngpio)
+		return -ENXIO;
+	return irq_create_mapping(kona_gpio->irq_domain, gpio);
+}
+
+static int bcm_kona_gpio_set_debounce(struct gpio_chip *chip, unsigned gpio,
+				      unsigned debounce)
+{
+	struct bcm_kona_gpio *kona_gpio;
+	void __iomem *reg_base;
+	u32 val, res;
+	unsigned long flags;
+
+	kona_gpio = gpiochip_get_data(chip);
+	reg_base = kona_gpio->reg_base;
+	/* debounce must be 1-128ms (or 0) */
+	if ((debounce > 0 && debounce < 1000) || debounce > 128000) {
+		dev_err(chip->parent, "Debounce value %u not in range\n",
+			debounce);
+		return -EINVAL;
+	}
+
+	/* calculate debounce bit value */
+	if (debounce != 0) {
+		/* Convert to ms */
+		debounce /= 1000;
+		/* find the MSB */
+		res = fls(debounce) - 1;
+		/* Check if MSB-1 is set (round up or down) */
+		if (res > 0 && (debounce & BIT(res - 1)))
+			res++;
+	}
+
+	/* spin lock for read-modify-write of the GPIO register */
+	raw_spin_lock_irqsave(&kona_gpio->lock, flags);
+
+	val = readl(reg_base + GPIO_CONTROL(gpio));
+	val &= ~GPIO_GPCTR0_DBR_MASK;
+
+	if (debounce == 0) {
+		/* disable debounce */
+		val &= ~GPIO_GPCTR0_DB_ENABLE_MASK;
+	} else {
+		val |= GPIO_GPCTR0_DB_ENABLE_MASK |
+		    (res << GPIO_GPCTR0_DBR_SHIFT);
+	}
+
+	writel(val, reg_base + GPIO_CONTROL(gpio));
+
+	raw_spin_unlock_irqrestore(&kona_gpio->lock, flags);
+
+	return 0;
+}
+
+static int bcm_kona_gpio_set_config(struct gpio_chip *chip, unsigned gpio,
+				    unsigned long config)
+{
+	u32 debounce;
+
+	if (pinconf_to_config_param(config) != PIN_CONFIG_INPUT_DEBOUNCE)
+		return -ENOTSUPP;
+
+	debounce = pinconf_to_config_argument(config);
+	return bcm_kona_gpio_set_debounce(chip, gpio, debounce);
+}
+
+static const struct gpio_chip template_chip = {
+	.label = "bcm-kona-gpio",
+	.owner = THIS_MODULE,
+	.request = bcm_kona_gpio_request,
+	.free = bcm_kona_gpio_free,
+	.get_direction = bcm_kona_gpio_get_dir,
+	.direction_input = bcm_kona_gpio_direction_input,
+	.get = bcm_kona_gpio_get,
+	.direction_output = bcm_kona_gpio_direction_output,
+	.set = bcm_kona_gpio_set,
+	.set_config = bcm_kona_gpio_set_config,
+	.to_irq = bcm_kona_gpio_to_irq,
+	.base = 0,
+};
+
+static void bcm_kona_gpio_irq_ack(struct irq_data *d)
+{
+	struct bcm_kona_gpio *kona_gpio;
+	void __iomem *reg_base;
+	unsigned gpio = d->hwirq;
+	int bank_id = GPIO_BANK(gpio);
+	int bit = GPIO_BIT(gpio);
+	u32 val;
+	unsigned long flags;
+
+	kona_gpio = irq_data_get_irq_chip_data(d);
+	reg_base = kona_gpio->reg_base;
+	raw_spin_lock_irqsave(&kona_gpio->lock, flags);
+
+	val = readl(reg_base + GPIO_INT_STATUS(bank_id));
+	val |= BIT(bit);
+	writel(val, reg_base + GPIO_INT_STATUS(bank_id));
+
+	raw_spin_unlock_irqrestore(&kona_gpio->lock, flags);
+}
+
+static void bcm_kona_gpio_irq_mask(struct irq_data *d)
+{
+	struct bcm_kona_gpio *kona_gpio;
+	void __iomem *reg_base;
+	unsigned gpio = d->hwirq;
+	int bank_id = GPIO_BANK(gpio);
+	int bit = GPIO_BIT(gpio);
+	u32 val;
+	unsigned long flags;
+
+	kona_gpio = irq_data_get_irq_chip_data(d);
+	reg_base = kona_gpio->reg_base;
+	raw_spin_lock_irqsave(&kona_gpio->lock, flags);
+
+	val = readl(reg_base + GPIO_INT_MASK(bank_id));
+	val |= BIT(bit);
+	writel(val, reg_base + GPIO_INT_MASK(bank_id));
+	gpiochip_disable_irq(&kona_gpio->gpio_chip, gpio);
+
+	raw_spin_unlock_irqrestore(&kona_gpio->lock, flags);
+}
+
+static void bcm_kona_gpio_irq_unmask(struct irq_data *d)
+{
+	struct bcm_kona_gpio *kona_gpio;
+	void __iomem *reg_base;
+	unsigned gpio = d->hwirq;
+	int bank_id = GPIO_BANK(gpio);
+	int bit = GPIO_BIT(gpio);
+	u32 val;
+	unsigned long flags;
+
+	kona_gpio = irq_data_get_irq_chip_data(d);
+	reg_base = kona_gpio->reg_base;
+	raw_spin_lock_irqsave(&kona_gpio->lock, flags);
+
+	val = readl(reg_base + GPIO_INT_MSKCLR(bank_id));
+	val |= BIT(bit);
+	writel(val, reg_base + GPIO_INT_MSKCLR(bank_id));
+	gpiochip_enable_irq(&kona_gpio->gpio_chip, gpio);
+
+	raw_spin_unlock_irqrestore(&kona_gpio->lock, flags);
+}
+
+static int bcm_kona_gpio_irq_set_type(struct irq_data *d, unsigned int type)
+{
+	struct bcm_kona_gpio *kona_gpio;
+	void __iomem *reg_base;
+	unsigned gpio = d->hwirq;
+	u32 lvl_type;
+	u32 val;
+	unsigned long flags;
+
+	kona_gpio = irq_data_get_irq_chip_data(d);
+	reg_base = kona_gpio->reg_base;
+	switch (type & IRQ_TYPE_SENSE_MASK) {
+	case IRQ_TYPE_EDGE_RISING:
+		lvl_type = GPIO_GPCTR0_ITR_CMD_RISING_EDGE;
+		break;
+
+	case IRQ_TYPE_EDGE_FALLING:
+		lvl_type = GPIO_GPCTR0_ITR_CMD_FALLING_EDGE;
+		break;
+
+	case IRQ_TYPE_EDGE_BOTH:
+		lvl_type = GPIO_GPCTR0_ITR_CMD_BOTH_EDGE;
+		break;
+
+	case IRQ_TYPE_LEVEL_HIGH:
+	case IRQ_TYPE_LEVEL_LOW:
+		/* BCM GPIO doesn't support level triggering */
+	default:
+		dev_err(kona_gpio->gpio_chip.parent,
+			"Invalid BCM GPIO irq type 0x%x\n", type);
+		return -EINVAL;
+	}
+
+	raw_spin_lock_irqsave(&kona_gpio->lock, flags);
+
+	val = readl(reg_base + GPIO_CONTROL(gpio));
+	val &= ~GPIO_GPCTR0_ITR_MASK;
+	val |= lvl_type << GPIO_GPCTR0_ITR_SHIFT;
+	writel(val, reg_base + GPIO_CONTROL(gpio));
+
+	raw_spin_unlock_irqrestore(&kona_gpio->lock, flags);
+
+	return 0;
+}
+
+static void bcm_kona_gpio_irq_handler(struct irq_desc *desc)
+{
+	void __iomem *reg_base;
+	int bit, bank_id;
+	unsigned long sta;
+	struct bcm_kona_gpio_bank *bank = irq_desc_get_handler_data(desc);
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+
+	chained_irq_enter(chip, desc);
+
+	/*
+	 * For bank interrupts, we can't use chip_data to store the kona_gpio
+	 * pointer, since GIC needs it for its own purposes. Therefore, we get
+	 * our pointer from the bank structure.
+	 */
+	reg_base = bank->kona_gpio->reg_base;
+	bank_id = bank->id;
+
+	while ((sta = readl(reg_base + GPIO_INT_STATUS(bank_id)) &
+		    (~(readl(reg_base + GPIO_INT_MASK(bank_id)))))) {
+		for_each_set_bit(bit, &sta, 32) {
+			int hwirq = GPIO_PER_BANK * bank_id + bit;
+			int child_irq =
+				irq_find_mapping(bank->kona_gpio->irq_domain,
+						 hwirq);
+			/*
+			 * Clear interrupt before handler is called so we don't
+			 * miss any interrupt occurred during executing them.
+			 */
+			writel(readl(reg_base + GPIO_INT_STATUS(bank_id)) |
+			       BIT(bit), reg_base + GPIO_INT_STATUS(bank_id));
+			/* Invoke interrupt handler */
+			generic_handle_irq(child_irq);
+		}
+	}
+
+	chained_irq_exit(chip, desc);
+}
+
+static int bcm_kona_gpio_irq_reqres(struct irq_data *d)
+{
+	struct bcm_kona_gpio *kona_gpio = irq_data_get_irq_chip_data(d);
+
+	return gpiochip_reqres_irq(&kona_gpio->gpio_chip, d->hwirq);
+}
+
+static void bcm_kona_gpio_irq_relres(struct irq_data *d)
+{
+	struct bcm_kona_gpio *kona_gpio = irq_data_get_irq_chip_data(d);
+
+	gpiochip_relres_irq(&kona_gpio->gpio_chip, d->hwirq);
+}
+
+static struct irq_chip bcm_gpio_irq_chip = {
+	.name = "bcm-kona-gpio",
+	.irq_ack = bcm_kona_gpio_irq_ack,
+	.irq_mask = bcm_kona_gpio_irq_mask,
+	.irq_unmask = bcm_kona_gpio_irq_unmask,
+	.irq_set_type = bcm_kona_gpio_irq_set_type,
+	.irq_request_resources = bcm_kona_gpio_irq_reqres,
+	.irq_release_resources = bcm_kona_gpio_irq_relres,
+};
+
+static struct of_device_id const bcm_kona_gpio_of_match[] = {
+	{ .compatible = "brcm,kona-gpio" },
+	{}
+};
+
+/*
+ * This lock class tells lockdep that GPIO irqs are in a different
+ * category than their parents, so it won't report false recursion.
+ */
+static struct lock_class_key gpio_lock_class;
+static struct lock_class_key gpio_request_class;
+
+static int bcm_kona_gpio_irq_map(struct irq_domain *d, unsigned int irq,
+				 irq_hw_number_t hwirq)
+{
+	int ret;
+
+	ret = irq_set_chip_data(irq, d->host_data);
+	if (ret < 0)
+		return ret;
+	irq_set_lockdep_class(irq, &gpio_lock_class, &gpio_request_class);
+	irq_set_chip_and_handler(irq, &bcm_gpio_irq_chip, handle_simple_irq);
+	irq_set_noprobe(irq);
+
+	return 0;
+}
+
+static void bcm_kona_gpio_irq_unmap(struct irq_domain *d, unsigned int irq)
+{
+	irq_set_chip_and_handler(irq, NULL, NULL);
+	irq_set_chip_data(irq, NULL);
+}
+
+static const struct irq_domain_ops bcm_kona_irq_ops = {
+	.map = bcm_kona_gpio_irq_map,
+	.unmap = bcm_kona_gpio_irq_unmap,
+	.xlate = irq_domain_xlate_twocell,
+};
+
+static void bcm_kona_gpio_reset(struct bcm_kona_gpio *kona_gpio)
+{
+	void __iomem *reg_base;
+	int i;
+
+	reg_base = kona_gpio->reg_base;
+	/* disable interrupts and clear status */
+	for (i = 0; i < kona_gpio->num_bank; i++) {
+		/* Unlock the entire bank first */
+		bcm_kona_gpio_write_lock_regs(reg_base, i, UNLOCK_CODE);
+		writel(0xffffffff, reg_base + GPIO_INT_MASK(i));
+		writel(0xffffffff, reg_base + GPIO_INT_STATUS(i));
+		/* Now re-lock the bank */
+		bcm_kona_gpio_write_lock_regs(reg_base, i, LOCK_CODE);
+	}
+}
+
+static int bcm_kona_gpio_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	const struct of_device_id *match;
+	struct bcm_kona_gpio_bank *bank;
+	struct bcm_kona_gpio *kona_gpio;
+	struct gpio_chip *chip;
+	int ret;
+	int i;
+
+	match = of_match_device(bcm_kona_gpio_of_match, dev);
+	if (!match) {
+		dev_err(dev, "Failed to find gpio controller\n");
+		return -ENODEV;
+	}
+
+	kona_gpio = devm_kzalloc(dev, sizeof(*kona_gpio), GFP_KERNEL);
+	if (!kona_gpio)
+		return -ENOMEM;
+
+	kona_gpio->gpio_chip = template_chip;
+	chip = &kona_gpio->gpio_chip;
+	ret = platform_irq_count(pdev);
+	if (!ret) {
+		dev_err(dev, "Couldn't determine # GPIO banks\n");
+		return -ENOENT;
+	} else if (ret < 0) {
+		return dev_err_probe(dev, ret, "Couldn't determine GPIO banks\n");
+	}
+	kona_gpio->num_bank = ret;
+
+	if (kona_gpio->num_bank > GPIO_MAX_BANK_NUM) {
+		dev_err(dev, "Too many GPIO banks configured (max=%d)\n",
+			GPIO_MAX_BANK_NUM);
+		return -ENXIO;
+	}
+	kona_gpio->banks = devm_kcalloc(dev,
+					kona_gpio->num_bank,
+					sizeof(*kona_gpio->banks),
+					GFP_KERNEL);
+	if (!kona_gpio->banks)
+		return -ENOMEM;
+
+	kona_gpio->pdev = pdev;
+	platform_set_drvdata(pdev, kona_gpio);
+	chip->of_node = dev->of_node;
+	chip->ngpio = kona_gpio->num_bank * GPIO_PER_BANK;
+
+	kona_gpio->irq_domain = irq_domain_add_linear(dev->of_node,
+						      chip->ngpio,
+						      &bcm_kona_irq_ops,
+						      kona_gpio);
+	if (!kona_gpio->irq_domain) {
+		dev_err(dev, "Couldn't allocate IRQ domain\n");
+		return -ENXIO;
+	}
+
+	kona_gpio->reg_base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(kona_gpio->reg_base)) {
+		ret = PTR_ERR(kona_gpio->reg_base);
+		goto err_irq_domain;
+	}
+
+	for (i = 0; i < kona_gpio->num_bank; i++) {
+		bank = &kona_gpio->banks[i];
+		bank->id = i;
+		bank->irq = platform_get_irq(pdev, i);
+		bank->kona_gpio = kona_gpio;
+		if (bank->irq < 0) {
+			dev_err(dev, "Couldn't get IRQ for bank %d", i);
+			ret = -ENOENT;
+			goto err_irq_domain;
+		}
+	}
+
+	dev_info(&pdev->dev, "Setting up Kona GPIO\n");
+
+	bcm_kona_gpio_reset(kona_gpio);
+
+	ret = devm_gpiochip_add_data(dev, chip, kona_gpio);
+	if (ret < 0) {
+		dev_err(dev, "Couldn't add GPIO chip -- %d\n", ret);
+		goto err_irq_domain;
+	}
+	for (i = 0; i < kona_gpio->num_bank; i++) {
+		bank = &kona_gpio->banks[i];
+		irq_set_chained_handler_and_data(bank->irq,
+						 bcm_kona_gpio_irq_handler,
+						 bank);
+	}
+
+	raw_spin_lock_init(&kona_gpio->lock);
+
+	return 0;
+
+err_irq_domain:
+	irq_domain_remove(kona_gpio->irq_domain);
+
+	return ret;
+}
+
+static struct platform_driver bcm_kona_gpio_driver = {
+	.driver = {
+			.name = "bcm-kona-gpio",
+			.of_match_table = bcm_kona_gpio_of_match,
+	},
+	.probe = bcm_kona_gpio_probe,
+};
+builtin_platform_driver(bcm_kona_gpio_driver);
diff --git a/drivers/gpio/gpio-bd70528.c b/drivers/gpio/gpio-bd70528.c
new file mode 100644
index 000000000..45b3da8da
--- /dev/null
+++ b/drivers/gpio/gpio-bd70528.c
@@ -0,0 +1,235 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2018 ROHM Semiconductors
+// gpio-bd70528.c ROHM BD70528MWV gpio driver
+
+#include <linux/gpio/driver.h>
+#include <linux/mfd/rohm-bd70528.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define GPIO_IN_REG(offset) (BD70528_REG_GPIO1_IN + (offset) * 2)
+#define GPIO_OUT_REG(offset) (BD70528_REG_GPIO1_OUT + (offset) * 2)
+
+struct bd70528_gpio {
+	struct rohm_regmap_dev chip;
+	struct gpio_chip gpio;
+};
+
+static int bd70528_set_debounce(struct bd70528_gpio *bdgpio,
+				unsigned int offset, unsigned int debounce)
+{
+	u8 val;
+
+	switch (debounce) {
+	case 0:
+		val = BD70528_DEBOUNCE_DISABLE;
+		break;
+	case 1 ... 15000:
+		val = BD70528_DEBOUNCE_15MS;
+		break;
+	case 15001 ... 30000:
+		val = BD70528_DEBOUNCE_30MS;
+		break;
+	case 30001 ... 50000:
+		val = BD70528_DEBOUNCE_50MS;
+		break;
+	default:
+		dev_err(bdgpio->chip.dev,
+			"Invalid debounce value %u\n", debounce);
+		return -EINVAL;
+	}
+	return regmap_update_bits(bdgpio->chip.regmap, GPIO_IN_REG(offset),
+				 BD70528_DEBOUNCE_MASK, val);
+}
+
+static int bd70528_get_direction(struct gpio_chip *chip, unsigned int offset)
+{
+	struct bd70528_gpio *bdgpio = gpiochip_get_data(chip);
+	int val, ret;
+
+	/* Do we need to do something to IRQs here? */
+	ret = regmap_read(bdgpio->chip.regmap, GPIO_OUT_REG(offset), &val);
+	if (ret) {
+		dev_err(bdgpio->chip.dev, "Could not read gpio direction\n");
+		return ret;
+	}
+	if (val & BD70528_GPIO_OUT_EN_MASK)
+		return GPIO_LINE_DIRECTION_OUT;
+
+	return GPIO_LINE_DIRECTION_IN;
+}
+
+static int bd70528_gpio_set_config(struct gpio_chip *chip, unsigned int offset,
+				   unsigned long config)
+{
+	struct bd70528_gpio *bdgpio = gpiochip_get_data(chip);
+
+	switch (pinconf_to_config_param(config)) {
+	case PIN_CONFIG_DRIVE_OPEN_DRAIN:
+		return regmap_update_bits(bdgpio->chip.regmap,
+					  GPIO_OUT_REG(offset),
+					  BD70528_GPIO_DRIVE_MASK,
+					  BD70528_GPIO_OPEN_DRAIN);
+		break;
+	case PIN_CONFIG_DRIVE_PUSH_PULL:
+		return regmap_update_bits(bdgpio->chip.regmap,
+					  GPIO_OUT_REG(offset),
+					  BD70528_GPIO_DRIVE_MASK,
+					  BD70528_GPIO_PUSH_PULL);
+		break;
+	case PIN_CONFIG_INPUT_DEBOUNCE:
+		return bd70528_set_debounce(bdgpio, offset,
+					    pinconf_to_config_argument(config));
+		break;
+	default:
+		break;
+	}
+	return -ENOTSUPP;
+}
+
+static int bd70528_direction_input(struct gpio_chip *chip, unsigned int offset)
+{
+	struct bd70528_gpio *bdgpio = gpiochip_get_data(chip);
+
+	/* Do we need to do something to IRQs here? */
+	return regmap_update_bits(bdgpio->chip.regmap, GPIO_OUT_REG(offset),
+				 BD70528_GPIO_OUT_EN_MASK,
+				 BD70528_GPIO_OUT_DISABLE);
+}
+
+static void bd70528_gpio_set(struct gpio_chip *chip, unsigned int offset,
+			     int value)
+{
+	int ret;
+	struct bd70528_gpio *bdgpio = gpiochip_get_data(chip);
+	u8 val = (value) ? BD70528_GPIO_OUT_HI : BD70528_GPIO_OUT_LO;
+
+	ret = regmap_update_bits(bdgpio->chip.regmap, GPIO_OUT_REG(offset),
+				 BD70528_GPIO_OUT_MASK, val);
+	if (ret)
+		dev_err(bdgpio->chip.dev, "Could not set gpio to %d\n", value);
+}
+
+static int bd70528_direction_output(struct gpio_chip *chip, unsigned int offset,
+				    int value)
+{
+	struct bd70528_gpio *bdgpio = gpiochip_get_data(chip);
+
+	bd70528_gpio_set(chip, offset, value);
+	return regmap_update_bits(bdgpio->chip.regmap, GPIO_OUT_REG(offset),
+				 BD70528_GPIO_OUT_EN_MASK,
+				 BD70528_GPIO_OUT_ENABLE);
+}
+
+#define GPIO_IN_STATE_MASK(offset) (BD70528_GPIO_IN_STATE_BASE << (offset))
+
+static int bd70528_gpio_get_o(struct bd70528_gpio *bdgpio, unsigned int offset)
+{
+	int ret;
+	unsigned int val;
+
+	ret = regmap_read(bdgpio->chip.regmap, GPIO_OUT_REG(offset), &val);
+	if (!ret)
+		ret = !!(val & BD70528_GPIO_OUT_MASK);
+	else
+		dev_err(bdgpio->chip.dev, "GPIO (out) state read failed\n");
+
+	return ret;
+}
+
+static int bd70528_gpio_get_i(struct bd70528_gpio *bdgpio, unsigned int offset)
+{
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(bdgpio->chip.regmap, BD70528_REG_GPIO_STATE, &val);
+
+	if (!ret)
+		ret = !(val & GPIO_IN_STATE_MASK(offset));
+	else
+		dev_err(bdgpio->chip.dev, "GPIO (in) state read failed\n");
+
+	return ret;
+}
+
+static int bd70528_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+	int ret;
+	struct bd70528_gpio *bdgpio = gpiochip_get_data(chip);
+
+	/*
+	 * There is a race condition where someone might be changing the
+	 * GPIO direction after we get it but before we read the value. But
+	 * application design where GPIO direction may be changed just when
+	 * we read GPIO value would be pointless as reader could not know
+	 * whether the returned high/low state is caused by input or output.
+	 * Or then there must be other ways to mitigate the issue. Thus
+	 * locking would make no sense.
+	 */
+	ret = bd70528_get_direction(chip, offset);
+	if (ret == GPIO_LINE_DIRECTION_OUT)
+		ret = bd70528_gpio_get_o(bdgpio, offset);
+	else if (ret == GPIO_LINE_DIRECTION_IN)
+		ret = bd70528_gpio_get_i(bdgpio, offset);
+	else
+		dev_err(bdgpio->chip.dev, "failed to read GPIO direction\n");
+
+	return ret;
+}
+
+static int bd70528_probe(struct platform_device *pdev)
+{
+	struct bd70528_gpio *bdgpio;
+	struct rohm_regmap_dev *bd70528;
+	int ret;
+
+	bd70528 = dev_get_drvdata(pdev->dev.parent);
+	if (!bd70528) {
+		dev_err(&pdev->dev, "No MFD driver data\n");
+		return -EINVAL;
+	}
+
+	bdgpio = devm_kzalloc(&pdev->dev, sizeof(*bdgpio),
+			      GFP_KERNEL);
+	if (!bdgpio)
+		return -ENOMEM;
+	bdgpio->chip.dev = &pdev->dev;
+	bdgpio->gpio.parent = pdev->dev.parent;
+	bdgpio->gpio.label = "bd70528-gpio";
+	bdgpio->gpio.owner = THIS_MODULE;
+	bdgpio->gpio.get_direction = bd70528_get_direction;
+	bdgpio->gpio.direction_input = bd70528_direction_input;
+	bdgpio->gpio.direction_output = bd70528_direction_output;
+	bdgpio->gpio.set_config = bd70528_gpio_set_config;
+	bdgpio->gpio.can_sleep = true;
+	bdgpio->gpio.get = bd70528_gpio_get;
+	bdgpio->gpio.set = bd70528_gpio_set;
+	bdgpio->gpio.ngpio = 4;
+	bdgpio->gpio.base = -1;
+#ifdef CONFIG_OF_GPIO
+	bdgpio->gpio.of_node = pdev->dev.parent->of_node;
+#endif
+	bdgpio->chip.regmap = bd70528->regmap;
+
+	ret = devm_gpiochip_add_data(&pdev->dev, &bdgpio->gpio,
+				     bdgpio);
+	if (ret)
+		dev_err(&pdev->dev, "gpio_init: Failed to add bd70528-gpio\n");
+
+	return ret;
+}
+
+static struct platform_driver bd70528_gpio = {
+	.driver = {
+		.name = "bd70528-gpio"
+	},
+	.probe = bd70528_probe,
+};
+
+module_platform_driver(bd70528_gpio);
+
+MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>");
+MODULE_DESCRIPTION("BD70528 voltage regulator driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:bd70528-gpio");
diff --git a/drivers/gpio/gpio-bd71828.c b/drivers/gpio/gpio-bd71828.c
new file mode 100644
index 000000000..3dbbc638e
--- /dev/null
+++ b/drivers/gpio/gpio-bd71828.c
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2018 ROHM Semiconductors
+
+#include <linux/gpio/driver.h>
+#include <linux/mfd/rohm-bd71828.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define GPIO_OUT_REG(off) (BD71828_REG_GPIO_CTRL1 + (off))
+#define HALL_GPIO_OFFSET 3
+
+struct bd71828_gpio {
+	struct rohm_regmap_dev chip;
+	struct gpio_chip gpio;
+};
+
+static void bd71828_gpio_set(struct gpio_chip *chip, unsigned int offset,
+			     int value)
+{
+	int ret;
+	struct bd71828_gpio *bdgpio = gpiochip_get_data(chip);
+	u8 val = (value) ? BD71828_GPIO_OUT_HI : BD71828_GPIO_OUT_LO;
+
+	/*
+	 * The HALL input pin can only be used as input. If this is the pin
+	 * we are dealing with - then we are done
+	 */
+	if (offset == HALL_GPIO_OFFSET)
+		return;
+
+	ret = regmap_update_bits(bdgpio->chip.regmap, GPIO_OUT_REG(offset),
+				 BD71828_GPIO_OUT_MASK, val);
+	if (ret)
+		dev_err(bdgpio->chip.dev, "Could not set gpio to %d\n", value);
+}
+
+static int bd71828_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+	int ret;
+	unsigned int val;
+	struct bd71828_gpio *bdgpio = gpiochip_get_data(chip);
+
+	if (offset == HALL_GPIO_OFFSET)
+		ret = regmap_read(bdgpio->chip.regmap, BD71828_REG_IO_STAT,
+				  &val);
+	else
+		ret = regmap_read(bdgpio->chip.regmap, GPIO_OUT_REG(offset),
+				  &val);
+	if (!ret)
+		ret = (val & BD71828_GPIO_OUT_MASK);
+
+	return ret;
+}
+
+static int bd71828_gpio_set_config(struct gpio_chip *chip, unsigned int offset,
+				   unsigned long config)
+{
+	struct bd71828_gpio *bdgpio = gpiochip_get_data(chip);
+
+	if (offset == HALL_GPIO_OFFSET)
+		return -ENOTSUPP;
+
+	switch (pinconf_to_config_param(config)) {
+	case PIN_CONFIG_DRIVE_OPEN_DRAIN:
+		return regmap_update_bits(bdgpio->chip.regmap,
+					  GPIO_OUT_REG(offset),
+					  BD71828_GPIO_DRIVE_MASK,
+					  BD71828_GPIO_OPEN_DRAIN);
+	case PIN_CONFIG_DRIVE_PUSH_PULL:
+		return regmap_update_bits(bdgpio->chip.regmap,
+					  GPIO_OUT_REG(offset),
+					  BD71828_GPIO_DRIVE_MASK,
+					  BD71828_GPIO_PUSH_PULL);
+	default:
+		break;
+	}
+	return -ENOTSUPP;
+}
+
+static int bd71828_get_direction(struct gpio_chip *chip, unsigned int offset)
+{
+	/*
+	 * Pin usage is selected by OTP data. We can't read it runtime. Hence
+	 * we trust that if the pin is not excluded by "gpio-reserved-ranges"
+	 * the OTP configuration is set to OUT. (Other pins but HALL input pin
+	 * on BD71828 can't really be used for general purpose input - input
+	 * states are used for specific cases like regulator control or
+	 * PMIC_ON_REQ.
+	 */
+	if (offset == HALL_GPIO_OFFSET)
+		return GPIO_LINE_DIRECTION_IN;
+
+	return GPIO_LINE_DIRECTION_OUT;
+}
+
+static int bd71828_probe(struct platform_device *pdev)
+{
+	struct bd71828_gpio *bdgpio;
+	struct rohm_regmap_dev *bd71828;
+
+	bd71828 = dev_get_drvdata(pdev->dev.parent);
+	if (!bd71828) {
+		dev_err(&pdev->dev, "No MFD driver data\n");
+		return -EINVAL;
+	}
+
+	bdgpio = devm_kzalloc(&pdev->dev, sizeof(*bdgpio),
+			      GFP_KERNEL);
+	if (!bdgpio)
+		return -ENOMEM;
+
+	bdgpio->chip.dev = &pdev->dev;
+	bdgpio->gpio.parent = pdev->dev.parent;
+	bdgpio->gpio.label = "bd71828-gpio";
+	bdgpio->gpio.owner = THIS_MODULE;
+	bdgpio->gpio.get_direction = bd71828_get_direction;
+	bdgpio->gpio.set_config = bd71828_gpio_set_config;
+	bdgpio->gpio.can_sleep = true;
+	bdgpio->gpio.get = bd71828_gpio_get;
+	bdgpio->gpio.set = bd71828_gpio_set;
+	bdgpio->gpio.base = -1;
+
+	/*
+	 * See if we need some implementation to mark some PINs as
+	 * not controllable based on DT info or if core can handle
+	 * "gpio-reserved-ranges" and exclude them from control
+	 */
+	bdgpio->gpio.ngpio = 4;
+	bdgpio->gpio.of_node = pdev->dev.parent->of_node;
+	bdgpio->chip.regmap = bd71828->regmap;
+
+	return devm_gpiochip_add_data(&pdev->dev, &bdgpio->gpio,
+				     bdgpio);
+}
+
+static struct platform_driver bd71828_gpio = {
+	.driver = {
+		.name = "bd71828-gpio"
+	},
+	.probe = bd71828_probe,
+};
+
+module_platform_driver(bd71828_gpio);
+
+MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>");
+MODULE_DESCRIPTION("BD71828 voltage regulator driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:bd71828-gpio");
diff --git a/drivers/gpio/gpio-bd9571mwv.c b/drivers/gpio/gpio-bd9571mwv.c
new file mode 100644
index 000000000..c0abc9c68
--- /dev/null
+++ b/drivers/gpio/gpio-bd9571mwv.c
@@ -0,0 +1,146 @@
+/*
+ * ROHM BD9571MWV-M GPIO driver
+ *
+ * Copyright (C) 2017 Marek Vasut <marek.vasut+renesas@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether expressed or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License version 2 for more details.
+ *
+ * Based on the TPS65086 driver
+ *
+ * NOTE: Interrupts are not supported yet.
+ */
+
+#include <linux/gpio/driver.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <linux/mfd/bd9571mwv.h>
+
+struct bd9571mwv_gpio {
+	struct gpio_chip chip;
+	struct bd9571mwv *bd;
+};
+
+static int bd9571mwv_gpio_get_direction(struct gpio_chip *chip,
+				       unsigned int offset)
+{
+	struct bd9571mwv_gpio *gpio = gpiochip_get_data(chip);
+	int ret, val;
+
+	ret = regmap_read(gpio->bd->regmap, BD9571MWV_GPIO_DIR, &val);
+	if (ret < 0)
+		return ret;
+	if (val & BIT(offset))
+		return GPIO_LINE_DIRECTION_IN;
+
+	return GPIO_LINE_DIRECTION_OUT;
+}
+
+static int bd9571mwv_gpio_direction_input(struct gpio_chip *chip,
+					 unsigned int offset)
+{
+	struct bd9571mwv_gpio *gpio = gpiochip_get_data(chip);
+
+	regmap_update_bits(gpio->bd->regmap, BD9571MWV_GPIO_DIR,
+			   BIT(offset), 0);
+
+	return 0;
+}
+
+static int bd9571mwv_gpio_direction_output(struct gpio_chip *chip,
+					  unsigned int offset, int value)
+{
+	struct bd9571mwv_gpio *gpio = gpiochip_get_data(chip);
+
+	/* Set the initial value */
+	regmap_update_bits(gpio->bd->regmap, BD9571MWV_GPIO_OUT,
+			   BIT(offset), value ? BIT(offset) : 0);
+	regmap_update_bits(gpio->bd->regmap, BD9571MWV_GPIO_DIR,
+			   BIT(offset), BIT(offset));
+
+	return 0;
+}
+
+static int bd9571mwv_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+	struct bd9571mwv_gpio *gpio = gpiochip_get_data(chip);
+	int ret, val;
+
+	ret = regmap_read(gpio->bd->regmap, BD9571MWV_GPIO_IN, &val);
+	if (ret < 0)
+		return ret;
+
+	return val & BIT(offset);
+}
+
+static void bd9571mwv_gpio_set(struct gpio_chip *chip, unsigned int offset,
+			      int value)
+{
+	struct bd9571mwv_gpio *gpio = gpiochip_get_data(chip);
+
+	regmap_update_bits(gpio->bd->regmap, BD9571MWV_GPIO_OUT,
+			   BIT(offset), value ? BIT(offset) : 0);
+}
+
+static const struct gpio_chip template_chip = {
+	.label			= "bd9571mwv-gpio",
+	.owner			= THIS_MODULE,
+	.get_direction		= bd9571mwv_gpio_get_direction,
+	.direction_input	= bd9571mwv_gpio_direction_input,
+	.direction_output	= bd9571mwv_gpio_direction_output,
+	.get			= bd9571mwv_gpio_get,
+	.set			= bd9571mwv_gpio_set,
+	.base			= -1,
+	.ngpio			= 2,
+	.can_sleep		= true,
+};
+
+static int bd9571mwv_gpio_probe(struct platform_device *pdev)
+{
+	struct bd9571mwv_gpio *gpio;
+	int ret;
+
+	gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
+	if (!gpio)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, gpio);
+
+	gpio->bd = dev_get_drvdata(pdev->dev.parent);
+	gpio->chip = template_chip;
+	gpio->chip.parent = gpio->bd->dev;
+
+	ret = devm_gpiochip_add_data(&pdev->dev, &gpio->chip, gpio);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct platform_device_id bd9571mwv_gpio_id_table[] = {
+	{ "bd9571mwv-gpio", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(platform, bd9571mwv_gpio_id_table);
+
+static struct platform_driver bd9571mwv_gpio_driver = {
+	.driver = {
+		.name = "bd9571mwv-gpio",
+	},
+	.probe = bd9571mwv_gpio_probe,
+	.id_table = bd9571mwv_gpio_id_table,
+};
+module_platform_driver(bd9571mwv_gpio_driver);
+
+MODULE_AUTHOR("Marek Vasut <marek.vasut+renesas@gmail.com>");
+MODULE_DESCRIPTION("BD9571MWV GPIO driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-brcmstb.c b/drivers/gpio/gpio-brcmstb.c
new file mode 100644
index 000000000..fcfc1a1f1
--- /dev/null
+++ b/drivers/gpio/gpio-brcmstb.c
@@ -0,0 +1,828 @@
+/*
+ * Copyright (C) 2015-2017 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/bitops.h>
+#include <linux/gpio/driver.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/module.h>
+#include <linux/irqdomain.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/interrupt.h>
+
+enum gio_reg_index {
+	GIO_REG_ODEN = 0,
+	GIO_REG_DATA,
+	GIO_REG_IODIR,
+	GIO_REG_EC,
+	GIO_REG_EI,
+	GIO_REG_MASK,
+	GIO_REG_LEVEL,
+	GIO_REG_STAT,
+	NUMBER_OF_GIO_REGISTERS
+};
+
+#define GIO_BANK_SIZE           (NUMBER_OF_GIO_REGISTERS * sizeof(u32))
+#define GIO_BANK_OFF(bank, off)	(((bank) * GIO_BANK_SIZE) + (off * sizeof(u32)))
+#define GIO_ODEN(bank)          GIO_BANK_OFF(bank, GIO_REG_ODEN)
+#define GIO_DATA(bank)          GIO_BANK_OFF(bank, GIO_REG_DATA)
+#define GIO_IODIR(bank)         GIO_BANK_OFF(bank, GIO_REG_IODIR)
+#define GIO_EC(bank)            GIO_BANK_OFF(bank, GIO_REG_EC)
+#define GIO_EI(bank)            GIO_BANK_OFF(bank, GIO_REG_EI)
+#define GIO_MASK(bank)          GIO_BANK_OFF(bank, GIO_REG_MASK)
+#define GIO_LEVEL(bank)         GIO_BANK_OFF(bank, GIO_REG_LEVEL)
+#define GIO_STAT(bank)          GIO_BANK_OFF(bank, GIO_REG_STAT)
+
+struct brcmstb_gpio_bank {
+	struct list_head node;
+	int id;
+	struct gpio_chip gc;
+	struct brcmstb_gpio_priv *parent_priv;
+	u32 width;
+	u32 wake_active;
+	u32 saved_regs[GIO_REG_STAT]; /* Don't save and restore GIO_REG_STAT */
+};
+
+struct brcmstb_gpio_priv {
+	struct list_head bank_list;
+	void __iomem *reg_base;
+	struct platform_device *pdev;
+	struct irq_domain *irq_domain;
+	struct irq_chip irq_chip;
+	int parent_irq;
+	int gpio_base;
+	int num_gpios;
+	int parent_wake_irq;
+};
+
+#define MAX_GPIO_PER_BANK       32
+#define GPIO_BANK(gpio)         ((gpio) >> 5)
+/* assumes MAX_GPIO_PER_BANK is a multiple of 2 */
+#define GPIO_BIT(gpio)          ((gpio) & (MAX_GPIO_PER_BANK - 1))
+
+static inline struct brcmstb_gpio_priv *
+brcmstb_gpio_gc_to_priv(struct gpio_chip *gc)
+{
+	struct brcmstb_gpio_bank *bank = gpiochip_get_data(gc);
+	return bank->parent_priv;
+}
+
+static unsigned long
+__brcmstb_gpio_get_active_irqs(struct brcmstb_gpio_bank *bank)
+{
+	void __iomem *reg_base = bank->parent_priv->reg_base;
+
+	return bank->gc.read_reg(reg_base + GIO_STAT(bank->id)) &
+	       bank->gc.read_reg(reg_base + GIO_MASK(bank->id));
+}
+
+static unsigned long
+brcmstb_gpio_get_active_irqs(struct brcmstb_gpio_bank *bank)
+{
+	unsigned long status;
+	unsigned long flags;
+
+	spin_lock_irqsave(&bank->gc.bgpio_lock, flags);
+	status = __brcmstb_gpio_get_active_irqs(bank);
+	spin_unlock_irqrestore(&bank->gc.bgpio_lock, flags);
+
+	return status;
+}
+
+static int brcmstb_gpio_hwirq_to_offset(irq_hw_number_t hwirq,
+					struct brcmstb_gpio_bank *bank)
+{
+	return hwirq - (bank->gc.base - bank->parent_priv->gpio_base);
+}
+
+static void brcmstb_gpio_set_imask(struct brcmstb_gpio_bank *bank,
+		unsigned int hwirq, bool enable)
+{
+	struct gpio_chip *gc = &bank->gc;
+	struct brcmstb_gpio_priv *priv = bank->parent_priv;
+	u32 mask = BIT(brcmstb_gpio_hwirq_to_offset(hwirq, bank));
+	u32 imask;
+	unsigned long flags;
+
+	spin_lock_irqsave(&gc->bgpio_lock, flags);
+	imask = gc->read_reg(priv->reg_base + GIO_MASK(bank->id));
+	if (enable)
+		imask |= mask;
+	else
+		imask &= ~mask;
+	gc->write_reg(priv->reg_base + GIO_MASK(bank->id), imask);
+	spin_unlock_irqrestore(&gc->bgpio_lock, flags);
+}
+
+static int brcmstb_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
+{
+	struct brcmstb_gpio_priv *priv = brcmstb_gpio_gc_to_priv(gc);
+	/* gc_offset is relative to this gpio_chip; want real offset */
+	int hwirq = offset + (gc->base - priv->gpio_base);
+
+	if (hwirq >= priv->num_gpios)
+		return -ENXIO;
+	return irq_create_mapping(priv->irq_domain, hwirq);
+}
+
+/* -------------------- IRQ chip functions -------------------- */
+
+static void brcmstb_gpio_irq_mask(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct brcmstb_gpio_bank *bank = gpiochip_get_data(gc);
+
+	brcmstb_gpio_set_imask(bank, d->hwirq, false);
+}
+
+static void brcmstb_gpio_irq_unmask(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct brcmstb_gpio_bank *bank = gpiochip_get_data(gc);
+
+	brcmstb_gpio_set_imask(bank, d->hwirq, true);
+}
+
+static void brcmstb_gpio_irq_ack(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct brcmstb_gpio_bank *bank = gpiochip_get_data(gc);
+	struct brcmstb_gpio_priv *priv = bank->parent_priv;
+	u32 mask = BIT(brcmstb_gpio_hwirq_to_offset(d->hwirq, bank));
+
+	gc->write_reg(priv->reg_base + GIO_STAT(bank->id), mask);
+}
+
+static int brcmstb_gpio_irq_set_type(struct irq_data *d, unsigned int type)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct brcmstb_gpio_bank *bank = gpiochip_get_data(gc);
+	struct brcmstb_gpio_priv *priv = bank->parent_priv;
+	u32 mask = BIT(brcmstb_gpio_hwirq_to_offset(d->hwirq, bank));
+	u32 edge_insensitive, iedge_insensitive;
+	u32 edge_config, iedge_config;
+	u32 level, ilevel;
+	unsigned long flags;
+
+	switch (type) {
+	case IRQ_TYPE_LEVEL_LOW:
+		level = mask;
+		edge_config = 0;
+		edge_insensitive = 0;
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		level = mask;
+		edge_config = mask;
+		edge_insensitive = 0;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		level = 0;
+		edge_config = 0;
+		edge_insensitive = 0;
+		break;
+	case IRQ_TYPE_EDGE_RISING:
+		level = 0;
+		edge_config = mask;
+		edge_insensitive = 0;
+		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		level = 0;
+		edge_config = 0;  /* don't care, but want known value */
+		edge_insensitive = mask;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&bank->gc.bgpio_lock, flags);
+
+	iedge_config = bank->gc.read_reg(priv->reg_base +
+			GIO_EC(bank->id)) & ~mask;
+	iedge_insensitive = bank->gc.read_reg(priv->reg_base +
+			GIO_EI(bank->id)) & ~mask;
+	ilevel = bank->gc.read_reg(priv->reg_base +
+			GIO_LEVEL(bank->id)) & ~mask;
+
+	bank->gc.write_reg(priv->reg_base + GIO_EC(bank->id),
+			iedge_config | edge_config);
+	bank->gc.write_reg(priv->reg_base + GIO_EI(bank->id),
+			iedge_insensitive | edge_insensitive);
+	bank->gc.write_reg(priv->reg_base + GIO_LEVEL(bank->id),
+			ilevel | level);
+
+	spin_unlock_irqrestore(&bank->gc.bgpio_lock, flags);
+	return 0;
+}
+
+static int brcmstb_gpio_priv_set_wake(struct brcmstb_gpio_priv *priv,
+		unsigned int enable)
+{
+	int ret = 0;
+
+	if (enable)
+		ret = enable_irq_wake(priv->parent_wake_irq);
+	else
+		ret = disable_irq_wake(priv->parent_wake_irq);
+	if (ret)
+		dev_err(&priv->pdev->dev, "failed to %s wake-up interrupt\n",
+				enable ? "enable" : "disable");
+	return ret;
+}
+
+static int brcmstb_gpio_irq_set_wake(struct irq_data *d, unsigned int enable)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct brcmstb_gpio_bank *bank = gpiochip_get_data(gc);
+	struct brcmstb_gpio_priv *priv = bank->parent_priv;
+	u32 mask = BIT(brcmstb_gpio_hwirq_to_offset(d->hwirq, bank));
+
+	/*
+	 * Do not do anything specific for now, suspend/resume callbacks will
+	 * configure the interrupt mask appropriately
+	 */
+	if (enable)
+		bank->wake_active |= mask;
+	else
+		bank->wake_active &= ~mask;
+
+	return brcmstb_gpio_priv_set_wake(priv, enable);
+}
+
+static irqreturn_t brcmstb_gpio_wake_irq_handler(int irq, void *data)
+{
+	struct brcmstb_gpio_priv *priv = data;
+
+	if (!priv || irq != priv->parent_wake_irq)
+		return IRQ_NONE;
+
+	/* Nothing to do */
+	return IRQ_HANDLED;
+}
+
+static void brcmstb_gpio_irq_bank_handler(struct brcmstb_gpio_bank *bank)
+{
+	struct brcmstb_gpio_priv *priv = bank->parent_priv;
+	struct irq_domain *domain = priv->irq_domain;
+	int hwbase = bank->gc.base - priv->gpio_base;
+	unsigned long status;
+
+	while ((status = brcmstb_gpio_get_active_irqs(bank))) {
+		unsigned int irq, offset;
+
+		for_each_set_bit(offset, &status, 32) {
+			if (offset >= bank->width)
+				dev_warn(&priv->pdev->dev,
+					 "IRQ for invalid GPIO (bank=%d, offset=%d)\n",
+					 bank->id, offset);
+			irq = irq_linear_revmap(domain, hwbase + offset);
+			generic_handle_irq(irq);
+		}
+	}
+}
+
+/* Each UPG GIO block has one IRQ for all banks */
+static void brcmstb_gpio_irq_handler(struct irq_desc *desc)
+{
+	struct brcmstb_gpio_priv *priv = irq_desc_get_handler_data(desc);
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+	struct brcmstb_gpio_bank *bank;
+
+	/* Interrupts weren't properly cleared during probe */
+	BUG_ON(!priv || !chip);
+
+	chained_irq_enter(chip, desc);
+	list_for_each_entry(bank, &priv->bank_list, node)
+		brcmstb_gpio_irq_bank_handler(bank);
+	chained_irq_exit(chip, desc);
+}
+
+static struct brcmstb_gpio_bank *brcmstb_gpio_hwirq_to_bank(
+		struct brcmstb_gpio_priv *priv, irq_hw_number_t hwirq)
+{
+	struct brcmstb_gpio_bank *bank;
+	int i = 0;
+
+	/* banks are in descending order */
+	list_for_each_entry_reverse(bank, &priv->bank_list, node) {
+		i += bank->gc.ngpio;
+		if (hwirq < i)
+			return bank;
+	}
+	return NULL;
+}
+
+/*
+ * This lock class tells lockdep that GPIO irqs are in a different
+ * category than their parents, so it won't report false recursion.
+ */
+static struct lock_class_key brcmstb_gpio_irq_lock_class;
+static struct lock_class_key brcmstb_gpio_irq_request_class;
+
+
+static int brcmstb_gpio_irq_map(struct irq_domain *d, unsigned int irq,
+		irq_hw_number_t hwirq)
+{
+	struct brcmstb_gpio_priv *priv = d->host_data;
+	struct brcmstb_gpio_bank *bank =
+		brcmstb_gpio_hwirq_to_bank(priv, hwirq);
+	struct platform_device *pdev = priv->pdev;
+	int ret;
+
+	if (!bank)
+		return -EINVAL;
+
+	dev_dbg(&pdev->dev, "Mapping irq %d for gpio line %d (bank %d)\n",
+		irq, (int)hwirq, bank->id);
+	ret = irq_set_chip_data(irq, &bank->gc);
+	if (ret < 0)
+		return ret;
+	irq_set_lockdep_class(irq, &brcmstb_gpio_irq_lock_class,
+			      &brcmstb_gpio_irq_request_class);
+	irq_set_chip_and_handler(irq, &priv->irq_chip, handle_level_irq);
+	irq_set_noprobe(irq);
+	return 0;
+}
+
+static void brcmstb_gpio_irq_unmap(struct irq_domain *d, unsigned int irq)
+{
+	irq_set_chip_and_handler(irq, NULL, NULL);
+	irq_set_chip_data(irq, NULL);
+}
+
+static const struct irq_domain_ops brcmstb_gpio_irq_domain_ops = {
+	.map = brcmstb_gpio_irq_map,
+	.unmap = brcmstb_gpio_irq_unmap,
+	.xlate = irq_domain_xlate_twocell,
+};
+
+/* Make sure that the number of banks matches up between properties */
+static int brcmstb_gpio_sanity_check_banks(struct device *dev,
+		struct device_node *np, struct resource *res)
+{
+	int res_num_banks = resource_size(res) / GIO_BANK_SIZE;
+	int num_banks =
+		of_property_count_u32_elems(np, "brcm,gpio-bank-widths");
+
+	if (res_num_banks != num_banks) {
+		dev_err(dev, "Mismatch in banks: res had %d, bank-widths had %d\n",
+				res_num_banks, num_banks);
+		return -EINVAL;
+	} else {
+		return 0;
+	}
+}
+
+static int brcmstb_gpio_remove(struct platform_device *pdev)
+{
+	struct brcmstb_gpio_priv *priv = platform_get_drvdata(pdev);
+	struct brcmstb_gpio_bank *bank;
+	int offset, ret = 0, virq;
+
+	if (!priv) {
+		dev_err(&pdev->dev, "called %s without drvdata!\n", __func__);
+		return -EFAULT;
+	}
+
+	if (priv->parent_irq > 0)
+		irq_set_chained_handler_and_data(priv->parent_irq, NULL, NULL);
+
+	/* Remove all IRQ mappings and delete the domain */
+	if (priv->irq_domain) {
+		for (offset = 0; offset < priv->num_gpios; offset++) {
+			virq = irq_find_mapping(priv->irq_domain, offset);
+			irq_dispose_mapping(virq);
+		}
+		irq_domain_remove(priv->irq_domain);
+	}
+
+	/*
+	 * You can lose return values below, but we report all errors, and it's
+	 * more important to actually perform all of the steps.
+	 */
+	list_for_each_entry(bank, &priv->bank_list, node)
+		gpiochip_remove(&bank->gc);
+
+	return ret;
+}
+
+static int brcmstb_gpio_of_xlate(struct gpio_chip *gc,
+		const struct of_phandle_args *gpiospec, u32 *flags)
+{
+	struct brcmstb_gpio_priv *priv = brcmstb_gpio_gc_to_priv(gc);
+	struct brcmstb_gpio_bank *bank = gpiochip_get_data(gc);
+	int offset;
+
+	if (gc->of_gpio_n_cells != 2) {
+		WARN_ON(1);
+		return -EINVAL;
+	}
+
+	if (WARN_ON(gpiospec->args_count < gc->of_gpio_n_cells))
+		return -EINVAL;
+
+	offset = gpiospec->args[0] - (gc->base - priv->gpio_base);
+	if (offset >= gc->ngpio || offset < 0)
+		return -EINVAL;
+
+	if (unlikely(offset >= bank->width)) {
+		dev_warn_ratelimited(&priv->pdev->dev,
+			"Received request for invalid GPIO offset %d\n",
+			gpiospec->args[0]);
+	}
+
+	if (flags)
+		*flags = gpiospec->args[1];
+
+	return offset;
+}
+
+/* priv->parent_irq and priv->num_gpios must be set before calling */
+static int brcmstb_gpio_irq_setup(struct platform_device *pdev,
+		struct brcmstb_gpio_priv *priv)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	int err;
+
+	priv->irq_domain =
+		irq_domain_add_linear(np, priv->num_gpios,
+				      &brcmstb_gpio_irq_domain_ops,
+				      priv);
+	if (!priv->irq_domain) {
+		dev_err(dev, "Couldn't allocate IRQ domain\n");
+		return -ENXIO;
+	}
+
+	if (of_property_read_bool(np, "wakeup-source")) {
+		priv->parent_wake_irq = platform_get_irq(pdev, 1);
+		if (priv->parent_wake_irq < 0) {
+			priv->parent_wake_irq = 0;
+			dev_warn(dev,
+				"Couldn't get wake IRQ - GPIOs will not be able to wake from sleep");
+		} else {
+			/*
+			 * Set wakeup capability so we can process boot-time
+			 * "wakeups" (e.g., from S5 cold boot)
+			 */
+			device_set_wakeup_capable(dev, true);
+			device_wakeup_enable(dev);
+			err = devm_request_irq(dev, priv->parent_wake_irq,
+					       brcmstb_gpio_wake_irq_handler,
+					       IRQF_SHARED,
+					       "brcmstb-gpio-wake", priv);
+
+			if (err < 0) {
+				dev_err(dev, "Couldn't request wake IRQ");
+				goto out_free_domain;
+			}
+		}
+	}
+
+	priv->irq_chip.name = dev_name(dev);
+	priv->irq_chip.irq_disable = brcmstb_gpio_irq_mask;
+	priv->irq_chip.irq_mask = brcmstb_gpio_irq_mask;
+	priv->irq_chip.irq_unmask = brcmstb_gpio_irq_unmask;
+	priv->irq_chip.irq_ack = brcmstb_gpio_irq_ack;
+	priv->irq_chip.irq_set_type = brcmstb_gpio_irq_set_type;
+
+	if (priv->parent_wake_irq)
+		priv->irq_chip.irq_set_wake = brcmstb_gpio_irq_set_wake;
+
+	irq_set_chained_handler_and_data(priv->parent_irq,
+					 brcmstb_gpio_irq_handler, priv);
+	irq_set_status_flags(priv->parent_irq, IRQ_DISABLE_UNLAZY);
+
+	return 0;
+
+out_free_domain:
+	irq_domain_remove(priv->irq_domain);
+
+	return err;
+}
+
+static void brcmstb_gpio_bank_save(struct brcmstb_gpio_priv *priv,
+				   struct brcmstb_gpio_bank *bank)
+{
+	struct gpio_chip *gc = &bank->gc;
+	unsigned int i;
+
+	for (i = 0; i < GIO_REG_STAT; i++)
+		bank->saved_regs[i] = gc->read_reg(priv->reg_base +
+						   GIO_BANK_OFF(bank->id, i));
+}
+
+static void brcmstb_gpio_quiesce(struct device *dev, bool save)
+{
+	struct brcmstb_gpio_priv *priv = dev_get_drvdata(dev);
+	struct brcmstb_gpio_bank *bank;
+	struct gpio_chip *gc;
+	u32 imask;
+
+	/* disable non-wake interrupt */
+	if (priv->parent_irq >= 0)
+		disable_irq(priv->parent_irq);
+
+	list_for_each_entry(bank, &priv->bank_list, node) {
+		gc = &bank->gc;
+
+		if (save)
+			brcmstb_gpio_bank_save(priv, bank);
+
+		/* Unmask GPIOs which have been flagged as wake-up sources */
+		if (priv->parent_wake_irq)
+			imask = bank->wake_active;
+		else
+			imask = 0;
+		gc->write_reg(priv->reg_base + GIO_MASK(bank->id),
+			       imask);
+	}
+}
+
+static void brcmstb_gpio_shutdown(struct platform_device *pdev)
+{
+	/* Enable GPIO for S5 cold boot */
+	brcmstb_gpio_quiesce(&pdev->dev, false);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static void brcmstb_gpio_bank_restore(struct brcmstb_gpio_priv *priv,
+				      struct brcmstb_gpio_bank *bank)
+{
+	struct gpio_chip *gc = &bank->gc;
+	unsigned int i;
+
+	for (i = 0; i < GIO_REG_STAT; i++)
+		gc->write_reg(priv->reg_base + GIO_BANK_OFF(bank->id, i),
+			      bank->saved_regs[i]);
+}
+
+static int brcmstb_gpio_suspend(struct device *dev)
+{
+	brcmstb_gpio_quiesce(dev, true);
+	return 0;
+}
+
+static int brcmstb_gpio_resume(struct device *dev)
+{
+	struct brcmstb_gpio_priv *priv = dev_get_drvdata(dev);
+	struct brcmstb_gpio_bank *bank;
+	bool need_wakeup_event = false;
+
+	list_for_each_entry(bank, &priv->bank_list, node) {
+		need_wakeup_event |= !!__brcmstb_gpio_get_active_irqs(bank);
+		brcmstb_gpio_bank_restore(priv, bank);
+	}
+
+	if (priv->parent_wake_irq && need_wakeup_event)
+		pm_wakeup_event(dev, 0);
+
+	/* enable non-wake interrupt */
+	if (priv->parent_irq >= 0)
+		enable_irq(priv->parent_irq);
+
+	return 0;
+}
+
+#else
+#define brcmstb_gpio_suspend	NULL
+#define brcmstb_gpio_resume	NULL
+#endif /* CONFIG_PM_SLEEP */
+
+static const struct dev_pm_ops brcmstb_gpio_pm_ops = {
+	.suspend_noirq	= brcmstb_gpio_suspend,
+	.resume_noirq = brcmstb_gpio_resume,
+};
+
+static void brcmstb_gpio_set_names(struct device *dev,
+				   struct brcmstb_gpio_bank *bank)
+{
+	struct device_node *np = dev->of_node;
+	const char **names;
+	int nstrings, base;
+	unsigned int i;
+
+	base = bank->id * MAX_GPIO_PER_BANK;
+
+	nstrings = of_property_count_strings(np, "gpio-line-names");
+	if (nstrings <= base)
+		/* Line names not present */
+		return;
+
+	names = devm_kcalloc(dev, MAX_GPIO_PER_BANK, sizeof(*names),
+			     GFP_KERNEL);
+	if (!names)
+		return;
+
+	/*
+	 * Make sure to not index beyond the end of the number of descriptors
+	 * of the GPIO device.
+	 */
+	for (i = 0; i < bank->width; i++) {
+		const char *name;
+		int ret;
+
+		ret = of_property_read_string_index(np, "gpio-line-names",
+						    base + i, &name);
+		if (ret) {
+			if (ret != -ENODATA)
+				dev_err(dev, "unable to name line %d: %d\n",
+					base + i, ret);
+			break;
+		}
+		if (*name)
+			names[i] = name;
+	}
+
+	bank->gc.names = names;
+}
+
+static int brcmstb_gpio_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	void __iomem *reg_base;
+	struct brcmstb_gpio_priv *priv;
+	struct resource *res;
+	struct property *prop;
+	const __be32 *p;
+	u32 bank_width;
+	int num_banks = 0;
+	int err;
+	static int gpio_base;
+	unsigned long flags = 0;
+	bool need_wakeup_event = false;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+	platform_set_drvdata(pdev, priv);
+	INIT_LIST_HEAD(&priv->bank_list);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	reg_base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(reg_base))
+		return PTR_ERR(reg_base);
+
+	priv->gpio_base = gpio_base;
+	priv->reg_base = reg_base;
+	priv->pdev = pdev;
+
+	if (of_property_read_bool(np, "interrupt-controller")) {
+		priv->parent_irq = platform_get_irq(pdev, 0);
+		if (priv->parent_irq <= 0)
+			return -ENOENT;
+	} else {
+		priv->parent_irq = -ENOENT;
+	}
+
+	if (brcmstb_gpio_sanity_check_banks(dev, np, res))
+		return -EINVAL;
+
+	/*
+	 * MIPS endianness is configured by boot strap, which also reverses all
+	 * bus endianness (i.e., big-endian CPU + big endian bus ==> native
+	 * endian I/O).
+	 *
+	 * Other architectures (e.g., ARM) either do not support big endian, or
+	 * else leave I/O in little endian mode.
+	 */
+#if defined(CONFIG_MIPS) && defined(__BIG_ENDIAN)
+	flags = BGPIOF_BIG_ENDIAN_BYTE_ORDER;
+#endif
+
+	of_property_for_each_u32(np, "brcm,gpio-bank-widths", prop, p,
+			bank_width) {
+		struct brcmstb_gpio_bank *bank;
+		struct gpio_chip *gc;
+
+		/*
+		 * If bank_width is 0, then there is an empty bank in the
+		 * register block. Special handling for this case.
+		 */
+		if (bank_width == 0) {
+			dev_dbg(dev, "Width 0 found: Empty bank @ %d\n",
+				num_banks);
+			num_banks++;
+			gpio_base += MAX_GPIO_PER_BANK;
+			continue;
+		}
+
+		bank = devm_kzalloc(dev, sizeof(*bank), GFP_KERNEL);
+		if (!bank) {
+			err = -ENOMEM;
+			goto fail;
+		}
+
+		bank->parent_priv = priv;
+		bank->id = num_banks;
+		if (bank_width <= 0 || bank_width > MAX_GPIO_PER_BANK) {
+			dev_err(dev, "Invalid bank width %d\n", bank_width);
+			err = -EINVAL;
+			goto fail;
+		} else {
+			bank->width = bank_width;
+		}
+
+		/*
+		 * Regs are 4 bytes wide, have data reg, no set/clear regs,
+		 * and direction bits have 0 = output and 1 = input
+		 */
+		gc = &bank->gc;
+		err = bgpio_init(gc, dev, 4,
+				reg_base + GIO_DATA(bank->id),
+				NULL, NULL, NULL,
+				reg_base + GIO_IODIR(bank->id), flags);
+		if (err) {
+			dev_err(dev, "bgpio_init() failed\n");
+			goto fail;
+		}
+
+		gc->of_node = np;
+		gc->owner = THIS_MODULE;
+		gc->label = devm_kasprintf(dev, GFP_KERNEL, "%pOF", dev->of_node);
+		if (!gc->label) {
+			err = -ENOMEM;
+			goto fail;
+		}
+		gc->base = gpio_base;
+		gc->of_gpio_n_cells = 2;
+		gc->of_xlate = brcmstb_gpio_of_xlate;
+		/* not all ngpio lines are valid, will use bank width later */
+		gc->ngpio = MAX_GPIO_PER_BANK;
+		if (priv->parent_irq > 0)
+			gc->to_irq = brcmstb_gpio_to_irq;
+
+		/*
+		 * Mask all interrupts by default, since wakeup interrupts may
+		 * be retained from S5 cold boot
+		 */
+		need_wakeup_event |= !!__brcmstb_gpio_get_active_irqs(bank);
+		gc->write_reg(reg_base + GIO_MASK(bank->id), 0);
+
+		brcmstb_gpio_set_names(dev, bank);
+		err = gpiochip_add_data(gc, bank);
+		if (err) {
+			dev_err(dev, "Could not add gpiochip for bank %d\n",
+					bank->id);
+			goto fail;
+		}
+		gpio_base += gc->ngpio;
+
+		dev_dbg(dev, "bank=%d, base=%d, ngpio=%d, width=%d\n", bank->id,
+			gc->base, gc->ngpio, bank->width);
+
+		/* Everything looks good, so add bank to list */
+		list_add(&bank->node, &priv->bank_list);
+
+		num_banks++;
+	}
+
+	priv->num_gpios = gpio_base - priv->gpio_base;
+	if (priv->parent_irq > 0) {
+		err = brcmstb_gpio_irq_setup(pdev, priv);
+		if (err)
+			goto fail;
+	}
+
+	if (priv->parent_wake_irq && need_wakeup_event)
+		pm_wakeup_event(dev, 0);
+
+	return 0;
+
+fail:
+	(void) brcmstb_gpio_remove(pdev);
+	return err;
+}
+
+static const struct of_device_id brcmstb_gpio_of_match[] = {
+	{ .compatible = "brcm,brcmstb-gpio" },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, brcmstb_gpio_of_match);
+
+static struct platform_driver brcmstb_gpio_driver = {
+	.driver = {
+		.name = "brcmstb-gpio",
+		.of_match_table = brcmstb_gpio_of_match,
+		.pm = &brcmstb_gpio_pm_ops,
+	},
+	.probe = brcmstb_gpio_probe,
+	.remove = brcmstb_gpio_remove,
+	.shutdown = brcmstb_gpio_shutdown,
+};
+module_platform_driver(brcmstb_gpio_driver);
+
+MODULE_AUTHOR("Gregory Fong");
+MODULE_DESCRIPTION("Driver for Broadcom BRCMSTB SoC UPG GPIO");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-bt8xx.c b/drivers/gpio/gpio-bt8xx.c
new file mode 100644
index 000000000..a6f30ad67
--- /dev/null
+++ b/drivers/gpio/gpio-bt8xx.c
@@ -0,0 +1,311 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+
+    bt8xx GPIO abuser
+
+    Copyright (C) 2008 Michael Buesch <m@bues.ch>
+
+    Please do _only_ contact the people listed _above_ with issues related to this driver.
+    All the other people listed below are not related to this driver. Their names
+    are only here, because this driver is derived from the bt848 driver.
+
+
+    Derived from the bt848 driver:
+
+    Copyright (C) 1996,97,98 Ralph  Metzler
+			   & Marcus Metzler
+    (c) 1999-2002 Gerd Knorr
+
+    some v4l2 code lines are taken from Justin's bttv2 driver which is
+    (c) 2000 Justin Schoeman
+
+    V4L1 removal from:
+    (c) 2005-2006 Nickolay V. Shmyrev
+
+    Fixes to be fully V4L2 compliant by
+    (c) 2006 Mauro Carvalho Chehab
+
+    Cropping and overscan support
+    Copyright (C) 2005, 2006 Michael H. Schimek
+    Sponsored by OPQ Systems AB
+
+*/
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+#include <linux/gpio/driver.h>
+#include <linux/slab.h>
+
+/* Steal the hardware definitions from the bttv driver. */
+#include "../media/pci/bt8xx/bt848.h"
+
+
+#define BT8XXGPIO_NR_GPIOS		24 /* We have 24 GPIO pins */
+
+
+struct bt8xxgpio {
+	spinlock_t lock;
+
+	void __iomem *mmio;
+	struct pci_dev *pdev;
+	struct gpio_chip gpio;
+
+#ifdef CONFIG_PM
+	u32 saved_outen;
+	u32 saved_data;
+#endif
+};
+
+#define bgwrite(dat, adr)	writel((dat), bg->mmio+(adr))
+#define bgread(adr)		readl(bg->mmio+(adr))
+
+
+static int modparam_gpiobase = -1/* dynamic */;
+module_param_named(gpiobase, modparam_gpiobase, int, 0444);
+MODULE_PARM_DESC(gpiobase, "The GPIO number base. -1 means dynamic, which is the default.");
+
+
+static int bt8xxgpio_gpio_direction_input(struct gpio_chip *gpio, unsigned nr)
+{
+	struct bt8xxgpio *bg = gpiochip_get_data(gpio);
+	unsigned long flags;
+	u32 outen, data;
+
+	spin_lock_irqsave(&bg->lock, flags);
+
+	data = bgread(BT848_GPIO_DATA);
+	data &= ~(1 << nr);
+	bgwrite(data, BT848_GPIO_DATA);
+
+	outen = bgread(BT848_GPIO_OUT_EN);
+	outen &= ~(1 << nr);
+	bgwrite(outen, BT848_GPIO_OUT_EN);
+
+	spin_unlock_irqrestore(&bg->lock, flags);
+
+	return 0;
+}
+
+static int bt8xxgpio_gpio_get(struct gpio_chip *gpio, unsigned nr)
+{
+	struct bt8xxgpio *bg = gpiochip_get_data(gpio);
+	unsigned long flags;
+	u32 val;
+
+	spin_lock_irqsave(&bg->lock, flags);
+	val = bgread(BT848_GPIO_DATA);
+	spin_unlock_irqrestore(&bg->lock, flags);
+
+	return !!(val & (1 << nr));
+}
+
+static int bt8xxgpio_gpio_direction_output(struct gpio_chip *gpio,
+					unsigned nr, int val)
+{
+	struct bt8xxgpio *bg = gpiochip_get_data(gpio);
+	unsigned long flags;
+	u32 outen, data;
+
+	spin_lock_irqsave(&bg->lock, flags);
+
+	outen = bgread(BT848_GPIO_OUT_EN);
+	outen |= (1 << nr);
+	bgwrite(outen, BT848_GPIO_OUT_EN);
+
+	data = bgread(BT848_GPIO_DATA);
+	if (val)
+		data |= (1 << nr);
+	else
+		data &= ~(1 << nr);
+	bgwrite(data, BT848_GPIO_DATA);
+
+	spin_unlock_irqrestore(&bg->lock, flags);
+
+	return 0;
+}
+
+static void bt8xxgpio_gpio_set(struct gpio_chip *gpio,
+			    unsigned nr, int val)
+{
+	struct bt8xxgpio *bg = gpiochip_get_data(gpio);
+	unsigned long flags;
+	u32 data;
+
+	spin_lock_irqsave(&bg->lock, flags);
+
+	data = bgread(BT848_GPIO_DATA);
+	if (val)
+		data |= (1 << nr);
+	else
+		data &= ~(1 << nr);
+	bgwrite(data, BT848_GPIO_DATA);
+
+	spin_unlock_irqrestore(&bg->lock, flags);
+}
+
+static void bt8xxgpio_gpio_setup(struct bt8xxgpio *bg)
+{
+	struct gpio_chip *c = &bg->gpio;
+
+	c->label = dev_name(&bg->pdev->dev);
+	c->owner = THIS_MODULE;
+	c->direction_input = bt8xxgpio_gpio_direction_input;
+	c->get = bt8xxgpio_gpio_get;
+	c->direction_output = bt8xxgpio_gpio_direction_output;
+	c->set = bt8xxgpio_gpio_set;
+	c->dbg_show = NULL;
+	c->base = modparam_gpiobase;
+	c->ngpio = BT8XXGPIO_NR_GPIOS;
+	c->can_sleep = false;
+}
+
+static int bt8xxgpio_probe(struct pci_dev *dev,
+			const struct pci_device_id *pci_id)
+{
+	struct bt8xxgpio *bg;
+	int err;
+
+	bg = devm_kzalloc(&dev->dev, sizeof(struct bt8xxgpio), GFP_KERNEL);
+	if (!bg)
+		return -ENOMEM;
+
+	bg->pdev = dev;
+	spin_lock_init(&bg->lock);
+
+	err = pci_enable_device(dev);
+	if (err) {
+		printk(KERN_ERR "bt8xxgpio: Can't enable device.\n");
+		return err;
+	}
+	if (!devm_request_mem_region(&dev->dev, pci_resource_start(dev, 0),
+				pci_resource_len(dev, 0),
+				"bt8xxgpio")) {
+		printk(KERN_WARNING "bt8xxgpio: Can't request iomem (0x%llx).\n",
+		       (unsigned long long)pci_resource_start(dev, 0));
+		err = -EBUSY;
+		goto err_disable;
+	}
+	pci_set_master(dev);
+	pci_set_drvdata(dev, bg);
+
+	bg->mmio = devm_ioremap(&dev->dev, pci_resource_start(dev, 0), 0x1000);
+	if (!bg->mmio) {
+		printk(KERN_ERR "bt8xxgpio: ioremap() failed\n");
+		err = -EIO;
+		goto err_disable;
+	}
+
+	/* Disable interrupts */
+	bgwrite(0, BT848_INT_MASK);
+
+	/* gpio init */
+	bgwrite(0, BT848_GPIO_DMA_CTL);
+	bgwrite(0, BT848_GPIO_REG_INP);
+	bgwrite(0, BT848_GPIO_OUT_EN);
+
+	bt8xxgpio_gpio_setup(bg);
+	err = gpiochip_add_data(&bg->gpio, bg);
+	if (err) {
+		printk(KERN_ERR "bt8xxgpio: Failed to register GPIOs\n");
+		goto err_disable;
+	}
+
+	return 0;
+
+err_disable:
+	pci_disable_device(dev);
+
+	return err;
+}
+
+static void bt8xxgpio_remove(struct pci_dev *pdev)
+{
+	struct bt8xxgpio *bg = pci_get_drvdata(pdev);
+
+	gpiochip_remove(&bg->gpio);
+
+	bgwrite(0, BT848_INT_MASK);
+	bgwrite(~0x0, BT848_INT_STAT);
+	bgwrite(0x0, BT848_GPIO_OUT_EN);
+
+	pci_disable_device(pdev);
+}
+
+#ifdef CONFIG_PM
+static int bt8xxgpio_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	struct bt8xxgpio *bg = pci_get_drvdata(pdev);
+	unsigned long flags;
+
+	spin_lock_irqsave(&bg->lock, flags);
+
+	bg->saved_outen = bgread(BT848_GPIO_OUT_EN);
+	bg->saved_data = bgread(BT848_GPIO_DATA);
+
+	bgwrite(0, BT848_INT_MASK);
+	bgwrite(~0x0, BT848_INT_STAT);
+	bgwrite(0x0, BT848_GPIO_OUT_EN);
+
+	spin_unlock_irqrestore(&bg->lock, flags);
+
+	pci_save_state(pdev);
+	pci_disable_device(pdev);
+	pci_set_power_state(pdev, pci_choose_state(pdev, state));
+
+	return 0;
+}
+
+static int bt8xxgpio_resume(struct pci_dev *pdev)
+{
+	struct bt8xxgpio *bg = pci_get_drvdata(pdev);
+	unsigned long flags;
+	int err;
+
+	pci_set_power_state(pdev, PCI_D0);
+	err = pci_enable_device(pdev);
+	if (err)
+		return err;
+	pci_restore_state(pdev);
+
+	spin_lock_irqsave(&bg->lock, flags);
+
+	bgwrite(0, BT848_INT_MASK);
+	bgwrite(0, BT848_GPIO_DMA_CTL);
+	bgwrite(0, BT848_GPIO_REG_INP);
+	bgwrite(bg->saved_outen, BT848_GPIO_OUT_EN);
+	bgwrite(bg->saved_data & bg->saved_outen,
+		BT848_GPIO_DATA);
+
+	spin_unlock_irqrestore(&bg->lock, flags);
+
+	return 0;
+}
+#else
+#define bt8xxgpio_suspend NULL
+#define bt8xxgpio_resume NULL
+#endif /* CONFIG_PM */
+
+static const struct pci_device_id bt8xxgpio_pci_tbl[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT848) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT849) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT878) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT879) },
+	{ 0, },
+};
+MODULE_DEVICE_TABLE(pci, bt8xxgpio_pci_tbl);
+
+static struct pci_driver bt8xxgpio_pci_driver = {
+	.name		= "bt8xxgpio",
+	.id_table	= bt8xxgpio_pci_tbl,
+	.probe		= bt8xxgpio_probe,
+	.remove		= bt8xxgpio_remove,
+	.suspend	= bt8xxgpio_suspend,
+	.resume		= bt8xxgpio_resume,
+};
+
+module_pci_driver(bt8xxgpio_pci_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Michael Buesch");
+MODULE_DESCRIPTION("Abuse a BT8xx framegrabber card as generic GPIO card");
diff --git a/drivers/gpio/gpio-cadence.c b/drivers/gpio/gpio-cadence.c
new file mode 100644
index 000000000..4ab3fcd9b
--- /dev/null
+++ b/drivers/gpio/gpio-cadence.c
@@ -0,0 +1,296 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/*
+ * Copyright 2017-2018 Cadence
+ *
+ * Authors:
+ *  Jan Kotas <jank@cadence.com>
+ *  Boris Brezillon <boris.brezillon@free-electrons.com>
+ */
+
+#include <linux/gpio/driver.h>
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+
+#define CDNS_GPIO_BYPASS_MODE		0x00
+#define CDNS_GPIO_DIRECTION_MODE	0x04
+#define CDNS_GPIO_OUTPUT_EN		0x08
+#define CDNS_GPIO_OUTPUT_VALUE		0x0c
+#define CDNS_GPIO_INPUT_VALUE		0x10
+#define CDNS_GPIO_IRQ_MASK		0x14
+#define CDNS_GPIO_IRQ_EN		0x18
+#define CDNS_GPIO_IRQ_DIS		0x1c
+#define CDNS_GPIO_IRQ_STATUS		0x20
+#define CDNS_GPIO_IRQ_TYPE		0x24
+#define CDNS_GPIO_IRQ_VALUE		0x28
+#define CDNS_GPIO_IRQ_ANY_EDGE		0x2c
+
+struct cdns_gpio_chip {
+	struct gpio_chip gc;
+	struct clk *pclk;
+	void __iomem *regs;
+	u32 bypass_orig;
+};
+
+static int cdns_gpio_request(struct gpio_chip *chip, unsigned int offset)
+{
+	struct cdns_gpio_chip *cgpio = gpiochip_get_data(chip);
+	unsigned long flags;
+
+	spin_lock_irqsave(&chip->bgpio_lock, flags);
+
+	iowrite32(ioread32(cgpio->regs + CDNS_GPIO_BYPASS_MODE) & ~BIT(offset),
+		  cgpio->regs + CDNS_GPIO_BYPASS_MODE);
+
+	spin_unlock_irqrestore(&chip->bgpio_lock, flags);
+	return 0;
+}
+
+static void cdns_gpio_free(struct gpio_chip *chip, unsigned int offset)
+{
+	struct cdns_gpio_chip *cgpio = gpiochip_get_data(chip);
+	unsigned long flags;
+
+	spin_lock_irqsave(&chip->bgpio_lock, flags);
+
+	iowrite32(ioread32(cgpio->regs + CDNS_GPIO_BYPASS_MODE) |
+		  (BIT(offset) & cgpio->bypass_orig),
+		  cgpio->regs + CDNS_GPIO_BYPASS_MODE);
+
+	spin_unlock_irqrestore(&chip->bgpio_lock, flags);
+}
+
+static void cdns_gpio_irq_mask(struct irq_data *d)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(d);
+	struct cdns_gpio_chip *cgpio = gpiochip_get_data(chip);
+
+	iowrite32(BIT(d->hwirq), cgpio->regs + CDNS_GPIO_IRQ_DIS);
+}
+
+static void cdns_gpio_irq_unmask(struct irq_data *d)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(d);
+	struct cdns_gpio_chip *cgpio = gpiochip_get_data(chip);
+
+	iowrite32(BIT(d->hwirq), cgpio->regs + CDNS_GPIO_IRQ_EN);
+}
+
+static int cdns_gpio_irq_set_type(struct irq_data *d, unsigned int type)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(d);
+	struct cdns_gpio_chip *cgpio = gpiochip_get_data(chip);
+	unsigned long flags;
+	u32 int_value;
+	u32 int_type;
+	u32 mask = BIT(d->hwirq);
+	int ret = 0;
+
+	spin_lock_irqsave(&chip->bgpio_lock, flags);
+
+	int_value = ioread32(cgpio->regs + CDNS_GPIO_IRQ_VALUE) & ~mask;
+	int_type = ioread32(cgpio->regs + CDNS_GPIO_IRQ_TYPE) & ~mask;
+
+	/*
+	 * The GPIO controller doesn't have an ACK register.
+	 * All interrupt statuses are cleared on a status register read.
+	 * Don't support edge interrupts for now.
+	 */
+
+	if (type == IRQ_TYPE_LEVEL_HIGH) {
+		int_type |= mask;
+		int_value |= mask;
+	} else if (type == IRQ_TYPE_LEVEL_LOW) {
+		int_type |= mask;
+	} else {
+		ret = -EINVAL;
+		goto err_irq_type;
+	}
+
+	iowrite32(int_value, cgpio->regs + CDNS_GPIO_IRQ_VALUE);
+	iowrite32(int_type, cgpio->regs + CDNS_GPIO_IRQ_TYPE);
+
+err_irq_type:
+	spin_unlock_irqrestore(&chip->bgpio_lock, flags);
+	return ret;
+}
+
+static void cdns_gpio_irq_handler(struct irq_desc *desc)
+{
+	struct gpio_chip *chip = irq_desc_get_handler_data(desc);
+	struct cdns_gpio_chip *cgpio = gpiochip_get_data(chip);
+	struct irq_chip *irqchip = irq_desc_get_chip(desc);
+	unsigned long status;
+	int hwirq;
+
+	chained_irq_enter(irqchip, desc);
+
+	status = ioread32(cgpio->regs + CDNS_GPIO_IRQ_STATUS) &
+		~ioread32(cgpio->regs + CDNS_GPIO_IRQ_MASK);
+
+	for_each_set_bit(hwirq, &status, chip->ngpio)
+		generic_handle_irq(irq_find_mapping(chip->irq.domain, hwirq));
+
+	chained_irq_exit(irqchip, desc);
+}
+
+static struct irq_chip cdns_gpio_irqchip = {
+	.name		= "cdns-gpio",
+	.irq_mask	= cdns_gpio_irq_mask,
+	.irq_unmask	= cdns_gpio_irq_unmask,
+	.irq_set_type	= cdns_gpio_irq_set_type
+};
+
+static int cdns_gpio_probe(struct platform_device *pdev)
+{
+	struct cdns_gpio_chip *cgpio;
+	int ret, irq;
+	u32 dir_prev;
+	u32 num_gpios = 32;
+
+	cgpio = devm_kzalloc(&pdev->dev, sizeof(*cgpio), GFP_KERNEL);
+	if (!cgpio)
+		return -ENOMEM;
+
+	cgpio->regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(cgpio->regs))
+		return PTR_ERR(cgpio->regs);
+
+	of_property_read_u32(pdev->dev.of_node, "ngpios", &num_gpios);
+
+	if (num_gpios > 32) {
+		dev_err(&pdev->dev, "ngpios must be less or equal 32\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * Set all pins as inputs by default, otherwise:
+	 * gpiochip_lock_as_irq:
+	 * tried to flag a GPIO set as output for IRQ
+	 * Generic GPIO driver stores the direction value internally,
+	 * so it needs to be changed before bgpio_init() is called.
+	 */
+	dir_prev = ioread32(cgpio->regs + CDNS_GPIO_DIRECTION_MODE);
+	iowrite32(GENMASK(num_gpios - 1, 0),
+		  cgpio->regs + CDNS_GPIO_DIRECTION_MODE);
+
+	ret = bgpio_init(&cgpio->gc, &pdev->dev, 4,
+			 cgpio->regs + CDNS_GPIO_INPUT_VALUE,
+			 cgpio->regs + CDNS_GPIO_OUTPUT_VALUE,
+			 NULL,
+			 NULL,
+			 cgpio->regs + CDNS_GPIO_DIRECTION_MODE,
+			 BGPIOF_READ_OUTPUT_REG_SET);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to register generic gpio, %d\n",
+			ret);
+		goto err_revert_dir;
+	}
+
+	cgpio->gc.label = dev_name(&pdev->dev);
+	cgpio->gc.ngpio = num_gpios;
+	cgpio->gc.parent = &pdev->dev;
+	cgpio->gc.base = -1;
+	cgpio->gc.owner = THIS_MODULE;
+	cgpio->gc.request = cdns_gpio_request;
+	cgpio->gc.free = cdns_gpio_free;
+
+	cgpio->pclk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(cgpio->pclk)) {
+		ret = PTR_ERR(cgpio->pclk);
+		dev_err(&pdev->dev,
+			"Failed to retrieve peripheral clock, %d\n", ret);
+		goto err_revert_dir;
+	}
+
+	ret = clk_prepare_enable(cgpio->pclk);
+	if (ret) {
+		dev_err(&pdev->dev,
+			"Failed to enable the peripheral clock, %d\n", ret);
+		goto err_revert_dir;
+	}
+
+	/*
+	 * Optional irq_chip support
+	 */
+	irq = platform_get_irq(pdev, 0);
+	if (irq >= 0) {
+		struct gpio_irq_chip *girq;
+
+		girq = &cgpio->gc.irq;
+		girq->chip = &cdns_gpio_irqchip;
+		girq->parent_handler = cdns_gpio_irq_handler;
+		girq->num_parents = 1;
+		girq->parents = devm_kcalloc(&pdev->dev, 1,
+					     sizeof(*girq->parents),
+					     GFP_KERNEL);
+		if (!girq->parents) {
+			ret = -ENOMEM;
+			goto err_disable_clk;
+		}
+		girq->parents[0] = irq;
+		girq->default_type = IRQ_TYPE_NONE;
+		girq->handler = handle_level_irq;
+	}
+
+	ret = devm_gpiochip_add_data(&pdev->dev, &cgpio->gc, cgpio);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret);
+		goto err_disable_clk;
+	}
+
+	cgpio->bypass_orig = ioread32(cgpio->regs + CDNS_GPIO_BYPASS_MODE);
+
+	/*
+	 * Enable gpio outputs, ignored for input direction
+	 */
+	iowrite32(GENMASK(num_gpios - 1, 0),
+		  cgpio->regs + CDNS_GPIO_OUTPUT_EN);
+	iowrite32(0, cgpio->regs + CDNS_GPIO_BYPASS_MODE);
+
+	platform_set_drvdata(pdev, cgpio);
+	return 0;
+
+err_disable_clk:
+	clk_disable_unprepare(cgpio->pclk);
+
+err_revert_dir:
+	iowrite32(dir_prev, cgpio->regs + CDNS_GPIO_DIRECTION_MODE);
+
+	return ret;
+}
+
+static int cdns_gpio_remove(struct platform_device *pdev)
+{
+	struct cdns_gpio_chip *cgpio = platform_get_drvdata(pdev);
+
+	iowrite32(cgpio->bypass_orig, cgpio->regs + CDNS_GPIO_BYPASS_MODE);
+	clk_disable_unprepare(cgpio->pclk);
+
+	return 0;
+}
+
+static const struct of_device_id cdns_of_ids[] = {
+	{ .compatible = "cdns,gpio-r1p02" },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, cdns_of_ids);
+
+static struct platform_driver cdns_gpio_driver = {
+	.driver = {
+		.name = "cdns-gpio",
+		.of_match_table = cdns_of_ids,
+	},
+	.probe = cdns_gpio_probe,
+	.remove = cdns_gpio_remove,
+};
+module_platform_driver(cdns_gpio_driver);
+
+MODULE_AUTHOR("Jan Kotas <jank@cadence.com>");
+MODULE_DESCRIPTION("Cadence GPIO driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:cdns-gpio");
diff --git a/drivers/gpio/gpio-clps711x.c b/drivers/gpio/gpio-clps711x.c
new file mode 100644
index 000000000..75f6f8d43
--- /dev/null
+++ b/drivers/gpio/gpio-clps711x.c
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  CLPS711X GPIO driver
+ *
+ *  Copyright (C) 2012,2013 Alexander Shiyan <shc_work@mail.ru>
+ */
+
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/gpio/driver.h>
+#include <linux/platform_device.h>
+
+static int clps711x_gpio_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	void __iomem *dat, *dir;
+	struct gpio_chip *gc;
+	int err, id;
+
+	if (!np)
+		return -ENODEV;
+
+	id = of_alias_get_id(np, "gpio");
+	if ((id < 0) || (id > 4))
+		return -ENODEV;
+
+	gc = devm_kzalloc(&pdev->dev, sizeof(*gc), GFP_KERNEL);
+	if (!gc)
+		return -ENOMEM;
+
+	dat = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(dat))
+		return PTR_ERR(dat);
+
+	dir = devm_platform_ioremap_resource(pdev, 1);
+	if (IS_ERR(dir))
+		return PTR_ERR(dir);
+
+	switch (id) {
+	case 3:
+		/* PORTD is inverted logic for direction register */
+		err = bgpio_init(gc, &pdev->dev, 1, dat, NULL, NULL,
+				 NULL, dir, 0);
+		break;
+	default:
+		err = bgpio_init(gc, &pdev->dev, 1, dat, NULL, NULL,
+				 dir, NULL, 0);
+		break;
+	}
+
+	if (err)
+		return err;
+
+	switch (id) {
+	case 4:
+		/* PORTE is 3 lines only */
+		gc->ngpio = 3;
+		break;
+	default:
+		break;
+	}
+
+	gc->base = -1;
+	gc->owner = THIS_MODULE;
+	platform_set_drvdata(pdev, gc);
+
+	return devm_gpiochip_add_data(&pdev->dev, gc, NULL);
+}
+
+static const struct of_device_id __maybe_unused clps711x_gpio_ids[] = {
+	{ .compatible = "cirrus,ep7209-gpio" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, clps711x_gpio_ids);
+
+static struct platform_driver clps711x_gpio_driver = {
+	.driver	= {
+		.name		= "clps711x-gpio",
+		.of_match_table	= of_match_ptr(clps711x_gpio_ids),
+	},
+	.probe	= clps711x_gpio_probe,
+};
+module_platform_driver(clps711x_gpio_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Alexander Shiyan <shc_work@mail.ru>");
+MODULE_DESCRIPTION("CLPS711X GPIO driver");
+MODULE_ALIAS("platform:clps711x-gpio");
diff --git a/drivers/gpio/gpio-creg-snps.c b/drivers/gpio/gpio-creg-snps.c
new file mode 100644
index 000000000..1d0827e79
--- /dev/null
+++ b/drivers/gpio/gpio-creg-snps.c
@@ -0,0 +1,189 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Synopsys CREG (Control REGisters) GPIO driver
+//
+// Copyright (C) 2018 Synopsys
+// Author: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
+
+#include <linux/gpio/driver.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+
+#define MAX_GPIO	32
+
+struct creg_layout {
+	u8 ngpio;
+	u8 shift[MAX_GPIO];
+	u8 on[MAX_GPIO];
+	u8 off[MAX_GPIO];
+	u8 bit_per_gpio[MAX_GPIO];
+};
+
+struct creg_gpio {
+	struct gpio_chip gc;
+	void __iomem *regs;
+	spinlock_t lock;
+	const struct creg_layout *layout;
+};
+
+static void creg_gpio_set(struct gpio_chip *gc, unsigned int offset, int val)
+{
+	struct creg_gpio *hcg = gpiochip_get_data(gc);
+	const struct creg_layout *layout = hcg->layout;
+	u32 reg, reg_shift, value;
+	unsigned long flags;
+	int i;
+
+	value = val ? hcg->layout->on[offset] : hcg->layout->off[offset];
+
+	reg_shift = layout->shift[offset];
+	for (i = 0; i < offset; i++)
+		reg_shift += layout->bit_per_gpio[i] + layout->shift[i];
+
+	spin_lock_irqsave(&hcg->lock, flags);
+	reg = readl(hcg->regs);
+	reg &= ~(GENMASK(layout->bit_per_gpio[i] - 1, 0) << reg_shift);
+	reg |=  (value << reg_shift);
+	writel(reg, hcg->regs);
+	spin_unlock_irqrestore(&hcg->lock, flags);
+}
+
+static int creg_gpio_dir_out(struct gpio_chip *gc, unsigned int offset, int val)
+{
+	creg_gpio_set(gc, offset, val);
+
+	return 0;
+}
+
+static int creg_gpio_validate_pg(struct device *dev, struct creg_gpio *hcg,
+				 int i)
+{
+	const struct creg_layout *layout = hcg->layout;
+
+	if (layout->bit_per_gpio[i] < 1 || layout->bit_per_gpio[i] > 8)
+		return -EINVAL;
+
+	/* Check that on value fits its placeholder */
+	if (GENMASK(31, layout->bit_per_gpio[i]) & layout->on[i])
+		return -EINVAL;
+
+	/* Check that off value fits its placeholder */
+	if (GENMASK(31, layout->bit_per_gpio[i]) & layout->off[i])
+		return -EINVAL;
+
+	if (layout->on[i] == layout->off[i])
+		return -EINVAL;
+
+	return 0;
+}
+
+static int creg_gpio_validate(struct device *dev, struct creg_gpio *hcg,
+			      u32 ngpios)
+{
+	u32 reg_len = 0;
+	int i;
+
+	if (hcg->layout->ngpio < 1 || hcg->layout->ngpio > MAX_GPIO)
+		return -EINVAL;
+
+	if (ngpios < 1 || ngpios > hcg->layout->ngpio) {
+		dev_err(dev, "ngpios must be in [1:%u]\n", hcg->layout->ngpio);
+		return -EINVAL;
+	}
+
+	for (i = 0; i < hcg->layout->ngpio; i++) {
+		if (creg_gpio_validate_pg(dev, hcg, i))
+			return -EINVAL;
+
+		reg_len += hcg->layout->shift[i] + hcg->layout->bit_per_gpio[i];
+	}
+
+	/* Check that we fit in 32 bit register */
+	if (reg_len > 32)
+		return -EINVAL;
+
+	return 0;
+}
+
+static const struct creg_layout hsdk_cs_ctl = {
+	.ngpio		= 10,
+	.shift		= { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
+	.off		= { 2, 2, 2, 2, 2, 2, 2, 2, 2, 2 },
+	.on		= { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 },
+	.bit_per_gpio	= { 2, 2, 2, 2, 2, 2, 2, 2, 2, 2 }
+};
+
+static const struct creg_layout axs10x_flsh_cs_ctl = {
+	.ngpio		= 1,
+	.shift		= { 0 },
+	.off		= { 1 },
+	.on		= { 3 },
+	.bit_per_gpio	= { 2 }
+};
+
+static const struct of_device_id creg_gpio_ids[] = {
+	{
+		.compatible = "snps,creg-gpio-axs10x",
+		.data = &axs10x_flsh_cs_ctl
+	}, {
+		.compatible = "snps,creg-gpio-hsdk",
+		.data = &hsdk_cs_ctl
+	}, { /* sentinel */ }
+};
+
+static int creg_gpio_probe(struct platform_device *pdev)
+{
+	const struct of_device_id *match;
+	struct device *dev = &pdev->dev;
+	struct creg_gpio *hcg;
+	u32 ngpios;
+	int ret;
+
+	hcg = devm_kzalloc(dev, sizeof(struct creg_gpio), GFP_KERNEL);
+	if (!hcg)
+		return -ENOMEM;
+
+	hcg->regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(hcg->regs))
+		return PTR_ERR(hcg->regs);
+
+	match = of_match_node(creg_gpio_ids, pdev->dev.of_node);
+	hcg->layout = match->data;
+	if (!hcg->layout)
+		return -EINVAL;
+
+	ret = of_property_read_u32(dev->of_node, "ngpios", &ngpios);
+	if (ret)
+		return ret;
+
+	ret = creg_gpio_validate(dev, hcg, ngpios);
+	if (ret)
+		return ret;
+
+	spin_lock_init(&hcg->lock);
+
+	hcg->gc.label = dev_name(dev);
+	hcg->gc.base = -1;
+	hcg->gc.ngpio = ngpios;
+	hcg->gc.set = creg_gpio_set;
+	hcg->gc.direction_output = creg_gpio_dir_out;
+	hcg->gc.of_node = dev->of_node;
+
+	ret = devm_gpiochip_add_data(dev, &hcg->gc, hcg);
+	if (ret)
+		return ret;
+
+	dev_info(dev, "GPIO controller with %d gpios probed\n", ngpios);
+
+	return 0;
+}
+
+static struct platform_driver creg_gpio_snps_driver = {
+	.driver = {
+		.name = "snps-creg-gpio",
+		.of_match_table = creg_gpio_ids,
+	},
+	.probe  = creg_gpio_probe,
+};
+builtin_platform_driver(creg_gpio_snps_driver);
diff --git a/drivers/gpio/gpio-crystalcove.c b/drivers/gpio/gpio-crystalcove.c
new file mode 100644
index 000000000..2ba225720
--- /dev/null
+++ b/drivers/gpio/gpio-crystalcove.c
@@ -0,0 +1,394 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Intel Crystal Cove GPIO Driver
+ *
+ * Copyright (C) 2012, 2014 Intel Corporation. All rights reserved.
+ *
+ * Author: Yang, Bin <bin.yang@intel.com>
+ */
+
+#include <linux/bitops.h>
+#include <linux/gpio/driver.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/intel_soc_pmic.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/seq_file.h>
+
+#define CRYSTALCOVE_GPIO_NUM	16
+#define CRYSTALCOVE_VGPIO_NUM	95
+
+#define UPDATE_IRQ_TYPE		BIT(0)
+#define UPDATE_IRQ_MASK		BIT(1)
+
+#define GPIO0IRQ		0x0b
+#define GPIO1IRQ		0x0c
+#define MGPIO0IRQS0		0x19
+#define MGPIO1IRQS0		0x1a
+#define MGPIO0IRQSX		0x1b
+#define MGPIO1IRQSX		0x1c
+#define GPIO0P0CTLO		0x2b
+#define GPIO0P0CTLI		0x33
+#define GPIO1P0CTLO		0x3b
+#define GPIO1P0CTLI		0x43
+#define GPIOPANELCTL		0x52
+
+#define CTLI_INTCNT_DIS		(0)
+#define CTLI_INTCNT_NE		(1 << 1)
+#define CTLI_INTCNT_PE		(2 << 1)
+#define CTLI_INTCNT_BE		(3 << 1)
+
+#define CTLO_DIR_IN		(0)
+#define CTLO_DIR_OUT		(1 << 5)
+
+#define CTLO_DRV_CMOS		(0)
+#define CTLO_DRV_OD		(1 << 4)
+
+#define CTLO_DRV_REN		(1 << 3)
+
+#define CTLO_RVAL_2KDW		(0)
+#define CTLO_RVAL_2KUP		(1 << 1)
+#define CTLO_RVAL_50KDW		(2 << 1)
+#define CTLO_RVAL_50KUP		(3 << 1)
+
+#define CTLO_INPUT_SET	(CTLO_DRV_CMOS | CTLO_DRV_REN | CTLO_RVAL_2KUP)
+#define CTLO_OUTPUT_SET	(CTLO_DIR_OUT | CTLO_INPUT_SET)
+
+enum ctrl_register {
+	CTRL_IN,
+	CTRL_OUT,
+};
+
+/**
+ * struct crystalcove_gpio - Crystal Cove GPIO controller
+ * @buslock: for bus lock/sync and unlock.
+ * @chip: the abstract gpio_chip structure.
+ * @regmap: the regmap from the parent device.
+ * @update: pending IRQ setting update, to be written to the chip upon unlock.
+ * @intcnt_value: the Interrupt Detect value to be written.
+ * @set_irq_mask: true if the IRQ mask needs to be set, false to clear.
+ */
+struct crystalcove_gpio {
+	struct mutex buslock; /* irq_bus_lock */
+	struct gpio_chip chip;
+	struct regmap *regmap;
+	int update;
+	int intcnt_value;
+	bool set_irq_mask;
+};
+
+static inline int to_reg(int gpio, enum ctrl_register reg_type)
+{
+	int reg;
+
+	if (gpio >= CRYSTALCOVE_GPIO_NUM) {
+		/*
+		 * Virtual GPIO called from ACPI, for now we only support
+		 * the panel ctl.
+		 */
+		switch (gpio) {
+		case 0x5e:
+			return GPIOPANELCTL;
+		default:
+			return -EOPNOTSUPP;
+		}
+	}
+
+	if (reg_type == CTRL_IN) {
+		if (gpio < 8)
+			reg = GPIO0P0CTLI;
+		else
+			reg = GPIO1P0CTLI;
+	} else {
+		if (gpio < 8)
+			reg = GPIO0P0CTLO;
+		else
+			reg = GPIO1P0CTLO;
+	}
+
+	return reg + gpio % 8;
+}
+
+static void crystalcove_update_irq_mask(struct crystalcove_gpio *cg,
+					int gpio)
+{
+	u8 mirqs0 = gpio < 8 ? MGPIO0IRQS0 : MGPIO1IRQS0;
+	int mask = BIT(gpio % 8);
+
+	if (cg->set_irq_mask)
+		regmap_update_bits(cg->regmap, mirqs0, mask, mask);
+	else
+		regmap_update_bits(cg->regmap, mirqs0, mask, 0);
+}
+
+static void crystalcove_update_irq_ctrl(struct crystalcove_gpio *cg, int gpio)
+{
+	int reg = to_reg(gpio, CTRL_IN);
+
+	regmap_update_bits(cg->regmap, reg, CTLI_INTCNT_BE, cg->intcnt_value);
+}
+
+static int crystalcove_gpio_dir_in(struct gpio_chip *chip, unsigned int gpio)
+{
+	struct crystalcove_gpio *cg = gpiochip_get_data(chip);
+	int reg = to_reg(gpio, CTRL_OUT);
+
+	if (reg < 0)
+		return 0;
+
+	return regmap_write(cg->regmap, reg, CTLO_INPUT_SET);
+}
+
+static int crystalcove_gpio_dir_out(struct gpio_chip *chip, unsigned int gpio,
+				    int value)
+{
+	struct crystalcove_gpio *cg = gpiochip_get_data(chip);
+	int reg = to_reg(gpio, CTRL_OUT);
+
+	if (reg < 0)
+		return 0;
+
+	return regmap_write(cg->regmap, reg, CTLO_OUTPUT_SET | value);
+}
+
+static int crystalcove_gpio_get(struct gpio_chip *chip, unsigned int gpio)
+{
+	struct crystalcove_gpio *cg = gpiochip_get_data(chip);
+	unsigned int val;
+	int ret, reg = to_reg(gpio, CTRL_IN);
+
+	if (reg < 0)
+		return 0;
+
+	ret = regmap_read(cg->regmap, reg, &val);
+	if (ret)
+		return ret;
+
+	return val & 0x1;
+}
+
+static void crystalcove_gpio_set(struct gpio_chip *chip,
+				 unsigned int gpio, int value)
+{
+	struct crystalcove_gpio *cg = gpiochip_get_data(chip);
+	int reg = to_reg(gpio, CTRL_OUT);
+
+	if (reg < 0)
+		return;
+
+	if (value)
+		regmap_update_bits(cg->regmap, reg, 1, 1);
+	else
+		regmap_update_bits(cg->regmap, reg, 1, 0);
+}
+
+static int crystalcove_irq_type(struct irq_data *data, unsigned int type)
+{
+	struct crystalcove_gpio *cg =
+		gpiochip_get_data(irq_data_get_irq_chip_data(data));
+
+	if (data->hwirq >= CRYSTALCOVE_GPIO_NUM)
+		return 0;
+
+	switch (type) {
+	case IRQ_TYPE_NONE:
+		cg->intcnt_value = CTLI_INTCNT_DIS;
+		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		cg->intcnt_value = CTLI_INTCNT_BE;
+		break;
+	case IRQ_TYPE_EDGE_RISING:
+		cg->intcnt_value = CTLI_INTCNT_PE;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		cg->intcnt_value = CTLI_INTCNT_NE;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	cg->update |= UPDATE_IRQ_TYPE;
+
+	return 0;
+}
+
+static void crystalcove_bus_lock(struct irq_data *data)
+{
+	struct crystalcove_gpio *cg =
+		gpiochip_get_data(irq_data_get_irq_chip_data(data));
+
+	mutex_lock(&cg->buslock);
+}
+
+static void crystalcove_bus_sync_unlock(struct irq_data *data)
+{
+	struct crystalcove_gpio *cg =
+		gpiochip_get_data(irq_data_get_irq_chip_data(data));
+	int gpio = data->hwirq;
+
+	if (cg->update & UPDATE_IRQ_TYPE)
+		crystalcove_update_irq_ctrl(cg, gpio);
+	if (cg->update & UPDATE_IRQ_MASK)
+		crystalcove_update_irq_mask(cg, gpio);
+	cg->update = 0;
+
+	mutex_unlock(&cg->buslock);
+}
+
+static void crystalcove_irq_unmask(struct irq_data *data)
+{
+	struct crystalcove_gpio *cg =
+		gpiochip_get_data(irq_data_get_irq_chip_data(data));
+
+	if (data->hwirq < CRYSTALCOVE_GPIO_NUM) {
+		cg->set_irq_mask = false;
+		cg->update |= UPDATE_IRQ_MASK;
+	}
+}
+
+static void crystalcove_irq_mask(struct irq_data *data)
+{
+	struct crystalcove_gpio *cg =
+		gpiochip_get_data(irq_data_get_irq_chip_data(data));
+
+	if (data->hwirq < CRYSTALCOVE_GPIO_NUM) {
+		cg->set_irq_mask = true;
+		cg->update |= UPDATE_IRQ_MASK;
+	}
+}
+
+static struct irq_chip crystalcove_irqchip = {
+	.name			= "Crystal Cove",
+	.irq_mask		= crystalcove_irq_mask,
+	.irq_unmask		= crystalcove_irq_unmask,
+	.irq_set_type		= crystalcove_irq_type,
+	.irq_bus_lock		= crystalcove_bus_lock,
+	.irq_bus_sync_unlock	= crystalcove_bus_sync_unlock,
+	.flags			= IRQCHIP_SKIP_SET_WAKE,
+};
+
+static irqreturn_t crystalcove_gpio_irq_handler(int irq, void *data)
+{
+	struct crystalcove_gpio *cg = data;
+	unsigned long pending;
+	unsigned int p0, p1;
+	int gpio;
+	unsigned int virq;
+
+	if (regmap_read(cg->regmap, GPIO0IRQ, &p0) ||
+	    regmap_read(cg->regmap, GPIO1IRQ, &p1))
+		return IRQ_NONE;
+
+	regmap_write(cg->regmap, GPIO0IRQ, p0);
+	regmap_write(cg->regmap, GPIO1IRQ, p1);
+
+	pending = p0 | p1 << 8;
+
+	for_each_set_bit(gpio, &pending, CRYSTALCOVE_GPIO_NUM) {
+		virq = irq_find_mapping(cg->chip.irq.domain, gpio);
+		handle_nested_irq(virq);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void crystalcove_gpio_dbg_show(struct seq_file *s,
+				      struct gpio_chip *chip)
+{
+	struct crystalcove_gpio *cg = gpiochip_get_data(chip);
+	int gpio, offset;
+	unsigned int ctlo, ctli, mirqs0, mirqsx, irq;
+
+	for (gpio = 0; gpio < CRYSTALCOVE_GPIO_NUM; gpio++) {
+		regmap_read(cg->regmap, to_reg(gpio, CTRL_OUT), &ctlo);
+		regmap_read(cg->regmap, to_reg(gpio, CTRL_IN), &ctli);
+		regmap_read(cg->regmap, gpio < 8 ? MGPIO0IRQS0 : MGPIO1IRQS0,
+			    &mirqs0);
+		regmap_read(cg->regmap, gpio < 8 ? MGPIO0IRQSX : MGPIO1IRQSX,
+			    &mirqsx);
+		regmap_read(cg->regmap, gpio < 8 ? GPIO0IRQ : GPIO1IRQ,
+			    &irq);
+
+		offset = gpio % 8;
+		seq_printf(s, " gpio-%-2d %s %s %s %s ctlo=%2x,%s %s %s\n",
+			   gpio, ctlo & CTLO_DIR_OUT ? "out" : "in ",
+			   ctli & 0x1 ? "hi" : "lo",
+			   ctli & CTLI_INTCNT_NE ? "fall" : "    ",
+			   ctli & CTLI_INTCNT_PE ? "rise" : "    ",
+			   ctlo,
+			   mirqs0 & BIT(offset) ? "s0 mask  " : "s0 unmask",
+			   mirqsx & BIT(offset) ? "sx mask  " : "sx unmask",
+			   irq & BIT(offset) ? "pending" : "       ");
+	}
+}
+
+static int crystalcove_gpio_probe(struct platform_device *pdev)
+{
+	int irq = platform_get_irq(pdev, 0);
+	struct crystalcove_gpio *cg;
+	int retval;
+	struct device *dev = pdev->dev.parent;
+	struct intel_soc_pmic *pmic = dev_get_drvdata(dev);
+	struct gpio_irq_chip *girq;
+
+	if (irq < 0)
+		return irq;
+
+	cg = devm_kzalloc(&pdev->dev, sizeof(*cg), GFP_KERNEL);
+	if (!cg)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, cg);
+
+	mutex_init(&cg->buslock);
+	cg->chip.label = KBUILD_MODNAME;
+	cg->chip.direction_input = crystalcove_gpio_dir_in;
+	cg->chip.direction_output = crystalcove_gpio_dir_out;
+	cg->chip.get = crystalcove_gpio_get;
+	cg->chip.set = crystalcove_gpio_set;
+	cg->chip.base = -1;
+	cg->chip.ngpio = CRYSTALCOVE_VGPIO_NUM;
+	cg->chip.can_sleep = true;
+	cg->chip.parent = dev;
+	cg->chip.dbg_show = crystalcove_gpio_dbg_show;
+	cg->regmap = pmic->regmap;
+
+	girq = &cg->chip.irq;
+	girq->chip = &crystalcove_irqchip;
+	/* This will let us handle the parent IRQ in the driver */
+	girq->parent_handler = NULL;
+	girq->num_parents = 0;
+	girq->parents = NULL;
+	girq->default_type = IRQ_TYPE_NONE;
+	girq->handler = handle_simple_irq;
+	girq->threaded = true;
+
+	retval = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+					   crystalcove_gpio_irq_handler,
+					   IRQF_ONESHOT, KBUILD_MODNAME, cg);
+	if (retval) {
+		dev_warn(&pdev->dev, "request irq failed: %d\n", retval);
+		return retval;
+	}
+
+	retval = devm_gpiochip_add_data(&pdev->dev, &cg->chip, cg);
+	if (retval) {
+		dev_warn(&pdev->dev, "add gpio chip error: %d\n", retval);
+		return retval;
+	}
+
+	return 0;
+}
+
+static struct platform_driver crystalcove_gpio_driver = {
+	.probe = crystalcove_gpio_probe,
+	.driver = {
+		.name = "crystal_cove_gpio",
+	},
+};
+module_platform_driver(crystalcove_gpio_driver);
+
+MODULE_AUTHOR("Yang, Bin <bin.yang@intel.com>");
+MODULE_DESCRIPTION("Intel Crystal Cove GPIO Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-cs5535.c b/drivers/gpio/gpio-cs5535.c
new file mode 100644
index 000000000..53b24e3ae
--- /dev/null
+++ b/drivers/gpio/gpio-cs5535.c
@@ -0,0 +1,368 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * AMD CS5535/CS5536 GPIO driver
+ * Copyright (C) 2006  Advanced Micro Devices, Inc.
+ * Copyright (C) 2007-2009  Andres Salomon <dilinger@collabora.co.uk>
+ */
+
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/gpio/driver.h>
+#include <linux/io.h>
+#include <linux/cs5535.h>
+#include <asm/msr.h>
+
+#define DRV_NAME "cs5535-gpio"
+
+/*
+ * Some GPIO pins
+ *  31-29,23 : reserved (always mask out)
+ *  28       : Power Button
+ *  26       : PME#
+ *  22-16    : LPC
+ *  14,15    : SMBus
+ *  9,8      : UART1
+ *  7        : PCI INTB
+ *  3,4      : UART2/DDC
+ *  2        : IDE_IRQ0
+ *  1        : AC_BEEP
+ *  0        : PCI INTA
+ *
+ * If a mask was not specified, allow all except
+ * reserved and Power Button
+ */
+#define GPIO_DEFAULT_MASK 0x0F7FFFFF
+
+static ulong mask = GPIO_DEFAULT_MASK;
+module_param_named(mask, mask, ulong, 0444);
+MODULE_PARM_DESC(mask, "GPIO channel mask.");
+
+/*
+ * FIXME: convert this singleton driver to use the state container
+ * design pattern, see Documentation/driver-api/driver-model/design-patterns.rst
+ */
+static struct cs5535_gpio_chip {
+	struct gpio_chip chip;
+	resource_size_t base;
+
+	struct platform_device *pdev;
+	spinlock_t lock;
+} cs5535_gpio_chip;
+
+/*
+ * The CS5535/CS5536 GPIOs support a number of extra features not defined
+ * by the gpio_chip API, so these are exported.  For a full list of the
+ * registers, see include/linux/cs5535.h.
+ */
+
+static void errata_outl(struct cs5535_gpio_chip *chip, u32 val,
+		unsigned int reg)
+{
+	unsigned long addr = chip->base + 0x80 + reg;
+
+	/*
+	 * According to the CS5536 errata (#36), after suspend
+	 * a write to the high bank GPIO register will clear all
+	 * non-selected bits; the recommended workaround is a
+	 * read-modify-write operation.
+	 *
+	 * Don't apply this errata to the edge status GPIOs, as writing
+	 * to their lower bits will clear them.
+	 */
+	if (reg != GPIO_POSITIVE_EDGE_STS && reg != GPIO_NEGATIVE_EDGE_STS) {
+		if (val & 0xffff)
+			val |= (inl(addr) & 0xffff); /* ignore the high bits */
+		else
+			val |= (inl(addr) ^ (val >> 16));
+	}
+	outl(val, addr);
+}
+
+static void __cs5535_gpio_set(struct cs5535_gpio_chip *chip, unsigned offset,
+		unsigned int reg)
+{
+	if (offset < 16)
+		/* low bank register */
+		outl(1 << offset, chip->base + reg);
+	else
+		/* high bank register */
+		errata_outl(chip, 1 << (offset - 16), reg);
+}
+
+void cs5535_gpio_set(unsigned offset, unsigned int reg)
+{
+	struct cs5535_gpio_chip *chip = &cs5535_gpio_chip;
+	unsigned long flags;
+
+	spin_lock_irqsave(&chip->lock, flags);
+	__cs5535_gpio_set(chip, offset, reg);
+	spin_unlock_irqrestore(&chip->lock, flags);
+}
+EXPORT_SYMBOL_GPL(cs5535_gpio_set);
+
+static void __cs5535_gpio_clear(struct cs5535_gpio_chip *chip, unsigned offset,
+		unsigned int reg)
+{
+	if (offset < 16)
+		/* low bank register */
+		outl(1 << (offset + 16), chip->base + reg);
+	else
+		/* high bank register */
+		errata_outl(chip, 1 << offset, reg);
+}
+
+void cs5535_gpio_clear(unsigned offset, unsigned int reg)
+{
+	struct cs5535_gpio_chip *chip = &cs5535_gpio_chip;
+	unsigned long flags;
+
+	spin_lock_irqsave(&chip->lock, flags);
+	__cs5535_gpio_clear(chip, offset, reg);
+	spin_unlock_irqrestore(&chip->lock, flags);
+}
+EXPORT_SYMBOL_GPL(cs5535_gpio_clear);
+
+int cs5535_gpio_isset(unsigned offset, unsigned int reg)
+{
+	struct cs5535_gpio_chip *chip = &cs5535_gpio_chip;
+	unsigned long flags;
+	long val;
+
+	spin_lock_irqsave(&chip->lock, flags);
+	if (offset < 16)
+		/* low bank register */
+		val = inl(chip->base + reg);
+	else {
+		/* high bank register */
+		val = inl(chip->base + 0x80 + reg);
+		offset -= 16;
+	}
+	spin_unlock_irqrestore(&chip->lock, flags);
+
+	return (val & (1 << offset)) ? 1 : 0;
+}
+EXPORT_SYMBOL_GPL(cs5535_gpio_isset);
+
+int cs5535_gpio_set_irq(unsigned group, unsigned irq)
+{
+	uint32_t lo, hi;
+
+	if (group > 7 || irq > 15)
+		return -EINVAL;
+
+	rdmsr(MSR_PIC_ZSEL_HIGH, lo, hi);
+
+	lo &= ~(0xF << (group * 4));
+	lo |= (irq & 0xF) << (group * 4);
+
+	wrmsr(MSR_PIC_ZSEL_HIGH, lo, hi);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cs5535_gpio_set_irq);
+
+void cs5535_gpio_setup_event(unsigned offset, int pair, int pme)
+{
+	struct cs5535_gpio_chip *chip = &cs5535_gpio_chip;
+	uint32_t shift = (offset % 8) * 4;
+	unsigned long flags;
+	uint32_t val;
+
+	if (offset >= 24)
+		offset = GPIO_MAP_W;
+	else if (offset >= 16)
+		offset = GPIO_MAP_Z;
+	else if (offset >= 8)
+		offset = GPIO_MAP_Y;
+	else
+		offset = GPIO_MAP_X;
+
+	spin_lock_irqsave(&chip->lock, flags);
+	val = inl(chip->base + offset);
+
+	/* Clear whatever was there before */
+	val &= ~(0xF << shift);
+
+	/* Set the new value */
+	val |= ((pair & 7) << shift);
+
+	/* Set the PME bit if this is a PME event */
+	if (pme)
+		val |= (1 << (shift + 3));
+
+	outl(val, chip->base + offset);
+	spin_unlock_irqrestore(&chip->lock, flags);
+}
+EXPORT_SYMBOL_GPL(cs5535_gpio_setup_event);
+
+/*
+ * Generic gpio_chip API support.
+ */
+
+static int chip_gpio_request(struct gpio_chip *c, unsigned offset)
+{
+	struct cs5535_gpio_chip *chip = gpiochip_get_data(c);
+	unsigned long flags;
+
+	spin_lock_irqsave(&chip->lock, flags);
+
+	/* check if this pin is available */
+	if ((mask & (1 << offset)) == 0) {
+		dev_info(&chip->pdev->dev,
+			"pin %u is not available (check mask)\n", offset);
+		spin_unlock_irqrestore(&chip->lock, flags);
+		return -EINVAL;
+	}
+
+	/* disable output aux 1 & 2 on this pin */
+	__cs5535_gpio_clear(chip, offset, GPIO_OUTPUT_AUX1);
+	__cs5535_gpio_clear(chip, offset, GPIO_OUTPUT_AUX2);
+
+	/* disable input aux 1 on this pin */
+	__cs5535_gpio_clear(chip, offset, GPIO_INPUT_AUX1);
+
+	spin_unlock_irqrestore(&chip->lock, flags);
+
+	return 0;
+}
+
+static int chip_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	return cs5535_gpio_isset(offset, GPIO_READ_BACK);
+}
+
+static void chip_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
+{
+	if (val)
+		cs5535_gpio_set(offset, GPIO_OUTPUT_VAL);
+	else
+		cs5535_gpio_clear(offset, GPIO_OUTPUT_VAL);
+}
+
+static int chip_direction_input(struct gpio_chip *c, unsigned offset)
+{
+	struct cs5535_gpio_chip *chip = gpiochip_get_data(c);
+	unsigned long flags;
+
+	spin_lock_irqsave(&chip->lock, flags);
+	__cs5535_gpio_set(chip, offset, GPIO_INPUT_ENABLE);
+	__cs5535_gpio_clear(chip, offset, GPIO_OUTPUT_ENABLE);
+	spin_unlock_irqrestore(&chip->lock, flags);
+
+	return 0;
+}
+
+static int chip_direction_output(struct gpio_chip *c, unsigned offset, int val)
+{
+	struct cs5535_gpio_chip *chip = gpiochip_get_data(c);
+	unsigned long flags;
+
+	spin_lock_irqsave(&chip->lock, flags);
+
+	__cs5535_gpio_set(chip, offset, GPIO_INPUT_ENABLE);
+	__cs5535_gpio_set(chip, offset, GPIO_OUTPUT_ENABLE);
+	if (val)
+		__cs5535_gpio_set(chip, offset, GPIO_OUTPUT_VAL);
+	else
+		__cs5535_gpio_clear(chip, offset, GPIO_OUTPUT_VAL);
+
+	spin_unlock_irqrestore(&chip->lock, flags);
+
+	return 0;
+}
+
+static const char * const cs5535_gpio_names[] = {
+	"GPIO0", "GPIO1", "GPIO2", "GPIO3",
+	"GPIO4", "GPIO5", "GPIO6", "GPIO7",
+	"GPIO8", "GPIO9", "GPIO10", "GPIO11",
+	"GPIO12", "GPIO13", "GPIO14", "GPIO15",
+	"GPIO16", "GPIO17", "GPIO18", "GPIO19",
+	"GPIO20", "GPIO21", "GPIO22", NULL,
+	"GPIO24", "GPIO25", "GPIO26", "GPIO27",
+	"GPIO28", NULL, NULL, NULL,
+};
+
+static struct cs5535_gpio_chip cs5535_gpio_chip = {
+	.chip = {
+		.owner = THIS_MODULE,
+		.label = DRV_NAME,
+
+		.base = 0,
+		.ngpio = 32,
+		.names = cs5535_gpio_names,
+		.request = chip_gpio_request,
+
+		.get = chip_gpio_get,
+		.set = chip_gpio_set,
+
+		.direction_input = chip_direction_input,
+		.direction_output = chip_direction_output,
+	},
+};
+
+static int cs5535_gpio_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	int err = -EIO;
+	ulong mask_orig = mask;
+
+	/* There are two ways to get the GPIO base address; one is by
+	 * fetching it from MSR_LBAR_GPIO, the other is by reading the
+	 * PCI BAR info.  The latter method is easier (especially across
+	 * different architectures), so we'll stick with that for now.  If
+	 * it turns out to be unreliable in the face of crappy BIOSes, we
+	 * can always go back to using MSRs.. */
+
+	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "can't fetch device resource info\n");
+		return err;
+	}
+
+	if (!devm_request_region(&pdev->dev, res->start, resource_size(res),
+				 pdev->name)) {
+		dev_err(&pdev->dev, "can't request region\n");
+		return err;
+	}
+
+	/* set up the driver-specific struct */
+	cs5535_gpio_chip.base = res->start;
+	cs5535_gpio_chip.pdev = pdev;
+	spin_lock_init(&cs5535_gpio_chip.lock);
+
+	dev_info(&pdev->dev, "reserved resource region %pR\n", res);
+
+	/* mask out reserved pins */
+	mask &= 0x1F7FFFFF;
+
+	/* do not allow pin 28, Power Button, as there's special handling
+	 * in the PMC needed. (note 12, p. 48) */
+	mask &= ~(1 << 28);
+
+	if (mask_orig != mask)
+		dev_info(&pdev->dev, "mask changed from 0x%08lX to 0x%08lX\n",
+				mask_orig, mask);
+
+	/* finally, register with the generic GPIO API */
+	err = devm_gpiochip_add_data(&pdev->dev, &cs5535_gpio_chip.chip,
+				     &cs5535_gpio_chip);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static struct platform_driver cs5535_gpio_driver = {
+	.driver = {
+		.name = DRV_NAME,
+	},
+	.probe = cs5535_gpio_probe,
+};
+
+module_platform_driver(cs5535_gpio_driver);
+
+MODULE_AUTHOR("Andres Salomon <dilinger@queued.net>");
+MODULE_DESCRIPTION("AMD CS5535/CS5536 GPIO driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/drivers/gpio/gpio-da9052.c b/drivers/gpio/gpio-da9052.c
new file mode 100644
index 000000000..9aa59afdc
--- /dev/null
+++ b/drivers/gpio/gpio-da9052.c
@@ -0,0 +1,235 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * GPIO Driver for Dialog DA9052 PMICs.
+ *
+ * Copyright(c) 2011 Dialog Semiconductor Ltd.
+ *
+ * Author: David Dajun Chen <dchen@diasemi.com>
+ */
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/uaccess.h>
+#include <linux/platform_device.h>
+#include <linux/gpio/driver.h>
+#include <linux/syscalls.h>
+#include <linux/seq_file.h>
+
+#include <linux/mfd/da9052/da9052.h>
+#include <linux/mfd/da9052/reg.h>
+#include <linux/mfd/da9052/pdata.h>
+
+#define DA9052_INPUT				1
+#define DA9052_OUTPUT_OPENDRAIN		2
+#define DA9052_OUTPUT_PUSHPULL			3
+
+#define DA9052_SUPPLY_VDD_IO1			0
+
+#define DA9052_DEBOUNCING_OFF			0
+#define DA9052_DEBOUNCING_ON			1
+
+#define DA9052_OUTPUT_LOWLEVEL			0
+
+#define DA9052_ACTIVE_LOW			0
+#define DA9052_ACTIVE_HIGH			1
+
+#define DA9052_GPIO_MAX_PORTS_PER_REGISTER	8
+#define DA9052_GPIO_SHIFT_COUNT(no)		(no%8)
+#define DA9052_GPIO_MASK_UPPER_NIBBLE		0xF0
+#define DA9052_GPIO_MASK_LOWER_NIBBLE		0x0F
+#define DA9052_GPIO_NIBBLE_SHIFT		4
+#define DA9052_IRQ_GPI0			16
+#define DA9052_GPIO_ODD_SHIFT			7
+#define DA9052_GPIO_EVEN_SHIFT			3
+
+struct da9052_gpio {
+	struct da9052 *da9052;
+	struct gpio_chip gp;
+};
+
+static unsigned char da9052_gpio_port_odd(unsigned offset)
+{
+	return offset % 2;
+}
+
+static int da9052_gpio_get(struct gpio_chip *gc, unsigned offset)
+{
+	struct da9052_gpio *gpio = gpiochip_get_data(gc);
+	int da9052_port_direction = 0;
+	int ret;
+
+	ret = da9052_reg_read(gpio->da9052,
+			      DA9052_GPIO_0_1_REG + (offset >> 1));
+	if (ret < 0)
+		return ret;
+
+	if (da9052_gpio_port_odd(offset)) {
+		da9052_port_direction = ret & DA9052_GPIO_ODD_PORT_PIN;
+		da9052_port_direction >>= 4;
+	} else {
+		da9052_port_direction = ret & DA9052_GPIO_EVEN_PORT_PIN;
+	}
+
+	switch (da9052_port_direction) {
+	case DA9052_INPUT:
+		if (offset < DA9052_GPIO_MAX_PORTS_PER_REGISTER)
+			ret = da9052_reg_read(gpio->da9052,
+					      DA9052_STATUS_C_REG);
+		else
+			ret = da9052_reg_read(gpio->da9052,
+					      DA9052_STATUS_D_REG);
+		if (ret < 0)
+			return ret;
+		return !!(ret & (1 << DA9052_GPIO_SHIFT_COUNT(offset)));
+	case DA9052_OUTPUT_PUSHPULL:
+		if (da9052_gpio_port_odd(offset))
+			return !!(ret & DA9052_GPIO_ODD_PORT_MODE);
+		else
+			return !!(ret & DA9052_GPIO_EVEN_PORT_MODE);
+	default:
+		return -EINVAL;
+	}
+}
+
+static void da9052_gpio_set(struct gpio_chip *gc, unsigned offset, int value)
+{
+	struct da9052_gpio *gpio = gpiochip_get_data(gc);
+	int ret;
+
+	if (da9052_gpio_port_odd(offset)) {
+			ret = da9052_reg_update(gpio->da9052, (offset >> 1) +
+						DA9052_GPIO_0_1_REG,
+						DA9052_GPIO_ODD_PORT_MODE,
+						value << DA9052_GPIO_ODD_SHIFT);
+			if (ret != 0)
+				dev_err(gpio->da9052->dev,
+					"Failed to updated gpio odd reg,%d",
+					ret);
+	} else {
+			ret = da9052_reg_update(gpio->da9052, (offset >> 1) +
+						DA9052_GPIO_0_1_REG,
+						DA9052_GPIO_EVEN_PORT_MODE,
+						value << DA9052_GPIO_EVEN_SHIFT);
+			if (ret != 0)
+				dev_err(gpio->da9052->dev,
+					"Failed to updated gpio even reg,%d",
+					ret);
+	}
+}
+
+static int da9052_gpio_direction_input(struct gpio_chip *gc, unsigned offset)
+{
+	struct da9052_gpio *gpio = gpiochip_get_data(gc);
+	unsigned char register_value;
+	int ret;
+
+	/* Format: function - 2 bits type - 1 bit mode - 1 bit */
+	register_value = DA9052_INPUT | DA9052_ACTIVE_LOW << 2 |
+			 DA9052_DEBOUNCING_ON << 3;
+
+	if (da9052_gpio_port_odd(offset))
+		ret = da9052_reg_update(gpio->da9052, (offset >> 1) +
+					DA9052_GPIO_0_1_REG,
+					DA9052_GPIO_MASK_UPPER_NIBBLE,
+					(register_value <<
+					DA9052_GPIO_NIBBLE_SHIFT));
+	else
+		ret = da9052_reg_update(gpio->da9052, (offset >> 1) +
+					DA9052_GPIO_0_1_REG,
+					DA9052_GPIO_MASK_LOWER_NIBBLE,
+					register_value);
+
+	return ret;
+}
+
+static int da9052_gpio_direction_output(struct gpio_chip *gc,
+					unsigned offset, int value)
+{
+	struct da9052_gpio *gpio = gpiochip_get_data(gc);
+	unsigned char register_value;
+	int ret;
+
+	/* Format: Function - 2 bits Type - 1 bit Mode - 1 bit */
+	register_value = DA9052_OUTPUT_PUSHPULL | DA9052_SUPPLY_VDD_IO1 << 2 |
+			 value << 3;
+
+	if (da9052_gpio_port_odd(offset))
+		ret = da9052_reg_update(gpio->da9052, (offset >> 1) +
+					DA9052_GPIO_0_1_REG,
+					DA9052_GPIO_MASK_UPPER_NIBBLE,
+					(register_value <<
+					DA9052_GPIO_NIBBLE_SHIFT));
+	else
+		ret = da9052_reg_update(gpio->da9052, (offset >> 1) +
+					DA9052_GPIO_0_1_REG,
+					DA9052_GPIO_MASK_LOWER_NIBBLE,
+					register_value);
+
+	return ret;
+}
+
+static int da9052_gpio_to_irq(struct gpio_chip *gc, u32 offset)
+{
+	struct da9052_gpio *gpio = gpiochip_get_data(gc);
+	struct da9052 *da9052 = gpio->da9052;
+
+	int irq;
+
+	irq = regmap_irq_get_virq(da9052->irq_data, DA9052_IRQ_GPI0 + offset);
+
+	return irq;
+}
+
+static const struct gpio_chip reference_gp = {
+	.label = "da9052-gpio",
+	.owner = THIS_MODULE,
+	.get = da9052_gpio_get,
+	.set = da9052_gpio_set,
+	.direction_input = da9052_gpio_direction_input,
+	.direction_output = da9052_gpio_direction_output,
+	.to_irq = da9052_gpio_to_irq,
+	.can_sleep = true,
+	.ngpio = 16,
+	.base = -1,
+};
+
+static int da9052_gpio_probe(struct platform_device *pdev)
+{
+	struct da9052_gpio *gpio;
+	struct da9052_pdata *pdata;
+	int ret;
+
+	gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
+	if (!gpio)
+		return -ENOMEM;
+
+	gpio->da9052 = dev_get_drvdata(pdev->dev.parent);
+	pdata = dev_get_platdata(gpio->da9052->dev);
+
+	gpio->gp = reference_gp;
+	if (pdata && pdata->gpio_base)
+		gpio->gp.base = pdata->gpio_base;
+
+	ret = devm_gpiochip_add_data(&pdev->dev, &gpio->gp, gpio);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, gpio);
+
+	return 0;
+}
+
+static struct platform_driver da9052_gpio_driver = {
+	.probe = da9052_gpio_probe,
+	.driver = {
+		.name	= "da9052-gpio",
+	},
+};
+
+module_platform_driver(da9052_gpio_driver);
+
+MODULE_AUTHOR("David Dajun Chen <dchen@diasemi.com>");
+MODULE_DESCRIPTION("DA9052 GPIO Device Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:da9052-gpio");
diff --git a/drivers/gpio/gpio-da9055.c b/drivers/gpio/gpio-da9055.c
new file mode 100644
index 000000000..6ad0c37b8
--- /dev/null
+++ b/drivers/gpio/gpio-da9055.c
@@ -0,0 +1,182 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * GPIO Driver for Dialog DA9055 PMICs.
+ *
+ * Copyright(c) 2012 Dialog Semiconductor Ltd.
+ *
+ * Author: David Dajun Chen <dchen@diasemi.com>
+ */
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/gpio/driver.h>
+
+#include <linux/mfd/da9055/core.h>
+#include <linux/mfd/da9055/reg.h>
+#include <linux/mfd/da9055/pdata.h>
+
+#define DA9055_VDD_IO			0x0
+#define DA9055_PUSH_PULL		0x3
+#define DA9055_ACT_LOW			0x0
+#define DA9055_GPI			0x1
+#define DA9055_PORT_MASK		0x3
+#define DA9055_PORT_SHIFT(offset)	(4 * (offset % 2))
+
+#define DA9055_INPUT			DA9055_GPI
+#define DA9055_OUTPUT			DA9055_PUSH_PULL
+#define DA9055_IRQ_GPI0			3
+
+struct da9055_gpio {
+	struct da9055 *da9055;
+	struct gpio_chip gp;
+};
+
+static int da9055_gpio_get(struct gpio_chip *gc, unsigned offset)
+{
+	struct da9055_gpio *gpio = gpiochip_get_data(gc);
+	int gpio_direction = 0;
+	int ret;
+
+	/* Get GPIO direction */
+	ret = da9055_reg_read(gpio->da9055, (offset >> 1) + DA9055_REG_GPIO0_1);
+	if (ret < 0)
+		return ret;
+
+	gpio_direction = ret & (DA9055_PORT_MASK) << DA9055_PORT_SHIFT(offset);
+	gpio_direction >>= DA9055_PORT_SHIFT(offset);
+	switch (gpio_direction) {
+	case DA9055_INPUT:
+		ret = da9055_reg_read(gpio->da9055, DA9055_REG_STATUS_B);
+		if (ret < 0)
+			return ret;
+		break;
+	case DA9055_OUTPUT:
+		ret = da9055_reg_read(gpio->da9055, DA9055_REG_GPIO_MODE0_2);
+		if (ret < 0)
+			return ret;
+	}
+
+	return ret & (1 << offset);
+
+}
+
+static void da9055_gpio_set(struct gpio_chip *gc, unsigned offset, int value)
+{
+	struct da9055_gpio *gpio = gpiochip_get_data(gc);
+
+	da9055_reg_update(gpio->da9055,
+			DA9055_REG_GPIO_MODE0_2,
+			1 << offset,
+			value << offset);
+}
+
+static int da9055_gpio_direction_input(struct gpio_chip *gc, unsigned offset)
+{
+	struct da9055_gpio *gpio = gpiochip_get_data(gc);
+	unsigned char reg_byte;
+
+	reg_byte = (DA9055_ACT_LOW | DA9055_GPI)
+				<< DA9055_PORT_SHIFT(offset);
+
+	return da9055_reg_update(gpio->da9055, (offset >> 1) +
+				DA9055_REG_GPIO0_1,
+				DA9055_PORT_MASK <<
+				DA9055_PORT_SHIFT(offset),
+				reg_byte);
+}
+
+static int da9055_gpio_direction_output(struct gpio_chip *gc,
+					unsigned offset, int value)
+{
+	struct da9055_gpio *gpio = gpiochip_get_data(gc);
+	unsigned char reg_byte;
+	int ret;
+
+	reg_byte = (DA9055_VDD_IO | DA9055_PUSH_PULL)
+					<< DA9055_PORT_SHIFT(offset);
+
+	ret = da9055_reg_update(gpio->da9055, (offset >> 1) +
+				DA9055_REG_GPIO0_1,
+				DA9055_PORT_MASK <<
+				DA9055_PORT_SHIFT(offset),
+				reg_byte);
+	if (ret < 0)
+		return ret;
+
+	da9055_gpio_set(gc, offset, value);
+
+	return 0;
+}
+
+static int da9055_gpio_to_irq(struct gpio_chip *gc, u32 offset)
+{
+	struct da9055_gpio *gpio = gpiochip_get_data(gc);
+	struct da9055 *da9055 = gpio->da9055;
+
+	return regmap_irq_get_virq(da9055->irq_data,
+				  DA9055_IRQ_GPI0 + offset);
+}
+
+static const struct gpio_chip reference_gp = {
+	.label = "da9055-gpio",
+	.owner = THIS_MODULE,
+	.get = da9055_gpio_get,
+	.set = da9055_gpio_set,
+	.direction_input = da9055_gpio_direction_input,
+	.direction_output = da9055_gpio_direction_output,
+	.to_irq = da9055_gpio_to_irq,
+	.can_sleep = true,
+	.ngpio = 3,
+	.base = -1,
+};
+
+static int da9055_gpio_probe(struct platform_device *pdev)
+{
+	struct da9055_gpio *gpio;
+	struct da9055_pdata *pdata;
+	int ret;
+
+	gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
+	if (!gpio)
+		return -ENOMEM;
+
+	gpio->da9055 = dev_get_drvdata(pdev->dev.parent);
+	pdata = dev_get_platdata(gpio->da9055->dev);
+
+	gpio->gp = reference_gp;
+	if (pdata && pdata->gpio_base)
+		gpio->gp.base = pdata->gpio_base;
+
+	ret = devm_gpiochip_add_data(&pdev->dev, &gpio->gp, gpio);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, gpio);
+
+	return 0;
+}
+
+static struct platform_driver da9055_gpio_driver = {
+	.probe = da9055_gpio_probe,
+	.driver = {
+		.name	= "da9055-gpio",
+	},
+};
+
+static int __init da9055_gpio_init(void)
+{
+	return platform_driver_register(&da9055_gpio_driver);
+}
+subsys_initcall(da9055_gpio_init);
+
+static void __exit da9055_gpio_exit(void)
+{
+	platform_driver_unregister(&da9055_gpio_driver);
+}
+module_exit(da9055_gpio_exit);
+
+MODULE_AUTHOR("David Dajun Chen <dchen@diasemi.com>");
+MODULE_DESCRIPTION("DA9055 GPIO Device Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:da9055-gpio");
diff --git a/drivers/gpio/gpio-davinci.c b/drivers/gpio/gpio-davinci.c
new file mode 100644
index 000000000..80597e90d
--- /dev/null
+++ b/drivers/gpio/gpio-davinci.c
@@ -0,0 +1,651 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * TI DaVinci GPIO Support
+ *
+ * Copyright (c) 2006-2007 David Brownell
+ * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com>
+ */
+
+#include <linux/gpio/driver.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/gpio-davinci.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/spinlock.h>
+
+#include <asm-generic/gpio.h>
+
+#define MAX_REGS_BANKS 5
+#define MAX_INT_PER_BANK 32
+
+struct davinci_gpio_regs {
+	u32	dir;
+	u32	out_data;
+	u32	set_data;
+	u32	clr_data;
+	u32	in_data;
+	u32	set_rising;
+	u32	clr_rising;
+	u32	set_falling;
+	u32	clr_falling;
+	u32	intstat;
+};
+
+typedef struct irq_chip *(*gpio_get_irq_chip_cb_t)(unsigned int irq);
+
+#define BINTEN	0x8 /* GPIO Interrupt Per-Bank Enable Register */
+
+static void __iomem *gpio_base;
+static unsigned int offset_array[5] = {0x10, 0x38, 0x60, 0x88, 0xb0};
+
+struct davinci_gpio_irq_data {
+	void __iomem			*regs;
+	struct davinci_gpio_controller	*chip;
+	int				bank_num;
+};
+
+struct davinci_gpio_controller {
+	struct gpio_chip	chip;
+	struct irq_domain	*irq_domain;
+	/* Serialize access to GPIO registers */
+	spinlock_t		lock;
+	void __iomem		*regs[MAX_REGS_BANKS];
+	int			gpio_unbanked;
+	int			irqs[MAX_INT_PER_BANK];
+};
+
+static inline u32 __gpio_mask(unsigned gpio)
+{
+	return 1 << (gpio % 32);
+}
+
+static inline struct davinci_gpio_regs __iomem *irq2regs(struct irq_data *d)
+{
+	struct davinci_gpio_regs __iomem *g;
+
+	g = (__force struct davinci_gpio_regs __iomem *)irq_data_get_irq_chip_data(d);
+
+	return g;
+}
+
+static int davinci_gpio_irq_setup(struct platform_device *pdev);
+
+/*--------------------------------------------------------------------------*/
+
+/* board setup code *MUST* setup pinmux and enable the GPIO clock. */
+static inline int __davinci_direction(struct gpio_chip *chip,
+			unsigned offset, bool out, int value)
+{
+	struct davinci_gpio_controller *d = gpiochip_get_data(chip);
+	struct davinci_gpio_regs __iomem *g;
+	unsigned long flags;
+	u32 temp;
+	int bank = offset / 32;
+	u32 mask = __gpio_mask(offset);
+
+	g = d->regs[bank];
+	spin_lock_irqsave(&d->lock, flags);
+	temp = readl_relaxed(&g->dir);
+	if (out) {
+		temp &= ~mask;
+		writel_relaxed(mask, value ? &g->set_data : &g->clr_data);
+	} else {
+		temp |= mask;
+	}
+	writel_relaxed(temp, &g->dir);
+	spin_unlock_irqrestore(&d->lock, flags);
+
+	return 0;
+}
+
+static int davinci_direction_in(struct gpio_chip *chip, unsigned offset)
+{
+	return __davinci_direction(chip, offset, false, 0);
+}
+
+static int
+davinci_direction_out(struct gpio_chip *chip, unsigned offset, int value)
+{
+	return __davinci_direction(chip, offset, true, value);
+}
+
+/*
+ * Read the pin's value (works even if it's set up as output);
+ * returns zero/nonzero.
+ *
+ * Note that changes are synched to the GPIO clock, so reading values back
+ * right after you've set them may give old values.
+ */
+static int davinci_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct davinci_gpio_controller *d = gpiochip_get_data(chip);
+	struct davinci_gpio_regs __iomem *g;
+	int bank = offset / 32;
+
+	g = d->regs[bank];
+
+	return !!(__gpio_mask(offset) & readl_relaxed(&g->in_data));
+}
+
+/*
+ * Assuming the pin is muxed as a gpio output, set its output value.
+ */
+static void
+davinci_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct davinci_gpio_controller *d = gpiochip_get_data(chip);
+	struct davinci_gpio_regs __iomem *g;
+	int bank = offset / 32;
+
+	g = d->regs[bank];
+
+	writel_relaxed(__gpio_mask(offset),
+		       value ? &g->set_data : &g->clr_data);
+}
+
+static struct davinci_gpio_platform_data *
+davinci_gpio_get_pdata(struct platform_device *pdev)
+{
+	struct device_node *dn = pdev->dev.of_node;
+	struct davinci_gpio_platform_data *pdata;
+	int ret;
+	u32 val;
+
+	if (!IS_ENABLED(CONFIG_OF) || !pdev->dev.of_node)
+		return dev_get_platdata(&pdev->dev);
+
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return NULL;
+
+	ret = of_property_read_u32(dn, "ti,ngpio", &val);
+	if (ret)
+		goto of_err;
+
+	pdata->ngpio = val;
+
+	ret = of_property_read_u32(dn, "ti,davinci-gpio-unbanked", &val);
+	if (ret)
+		goto of_err;
+
+	pdata->gpio_unbanked = val;
+
+	return pdata;
+
+of_err:
+	dev_err(&pdev->dev, "Populating pdata from DT failed: err %d\n", ret);
+	return NULL;
+}
+
+static int davinci_gpio_probe(struct platform_device *pdev)
+{
+	int bank, i, ret = 0;
+	unsigned int ngpio, nbank, nirq;
+	struct davinci_gpio_controller *chips;
+	struct davinci_gpio_platform_data *pdata;
+	struct device *dev = &pdev->dev;
+
+	pdata = davinci_gpio_get_pdata(pdev);
+	if (!pdata) {
+		dev_err(dev, "No platform data found\n");
+		return -EINVAL;
+	}
+
+	dev->platform_data = pdata;
+
+	/*
+	 * The gpio banks conceptually expose a segmented bitmap,
+	 * and "ngpio" is one more than the largest zero-based
+	 * bit index that's valid.
+	 */
+	ngpio = pdata->ngpio;
+	if (ngpio == 0) {
+		dev_err(dev, "How many GPIOs?\n");
+		return -EINVAL;
+	}
+
+	if (WARN_ON(ARCH_NR_GPIOS < ngpio))
+		ngpio = ARCH_NR_GPIOS;
+
+	/*
+	 * If there are unbanked interrupts then the number of
+	 * interrupts is equal to number of gpios else all are banked so
+	 * number of interrupts is equal to number of banks(each with 16 gpios)
+	 */
+	if (pdata->gpio_unbanked)
+		nirq = pdata->gpio_unbanked;
+	else
+		nirq = DIV_ROUND_UP(ngpio, 16);
+
+	chips = devm_kzalloc(dev, sizeof(*chips), GFP_KERNEL);
+	if (!chips)
+		return -ENOMEM;
+
+	gpio_base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(gpio_base))
+		return PTR_ERR(gpio_base);
+
+	for (i = 0; i < nirq; i++) {
+		chips->irqs[i] = platform_get_irq(pdev, i);
+		if (chips->irqs[i] < 0)
+			return dev_err_probe(dev, chips->irqs[i], "IRQ not populated\n");
+	}
+
+	chips->chip.label = dev_name(dev);
+
+	chips->chip.direction_input = davinci_direction_in;
+	chips->chip.get = davinci_gpio_get;
+	chips->chip.direction_output = davinci_direction_out;
+	chips->chip.set = davinci_gpio_set;
+
+	chips->chip.ngpio = ngpio;
+	chips->chip.base = pdata->no_auto_base ? pdata->base : -1;
+
+#ifdef CONFIG_OF_GPIO
+	chips->chip.of_gpio_n_cells = 2;
+	chips->chip.parent = dev;
+	chips->chip.of_node = dev->of_node;
+	chips->chip.request = gpiochip_generic_request;
+	chips->chip.free = gpiochip_generic_free;
+#endif
+	spin_lock_init(&chips->lock);
+
+	nbank = DIV_ROUND_UP(ngpio, 32);
+	for (bank = 0; bank < nbank; bank++)
+		chips->regs[bank] = gpio_base + offset_array[bank];
+
+	ret = devm_gpiochip_add_data(dev, &chips->chip, chips);
+	if (ret)
+		return ret;
+
+	platform_set_drvdata(pdev, chips);
+	ret = davinci_gpio_irq_setup(pdev);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+/*--------------------------------------------------------------------------*/
+/*
+ * We expect irqs will normally be set up as input pins, but they can also be
+ * used as output pins ... which is convenient for testing.
+ *
+ * NOTE:  The first few GPIOs also have direct INTC hookups in addition
+ * to their GPIOBNK0 irq, with a bit less overhead.
+ *
+ * All those INTC hookups (direct, plus several IRQ banks) can also
+ * serve as EDMA event triggers.
+ */
+
+static void gpio_irq_disable(struct irq_data *d)
+{
+	struct davinci_gpio_regs __iomem *g = irq2regs(d);
+	uintptr_t mask = (uintptr_t)irq_data_get_irq_handler_data(d);
+
+	writel_relaxed(mask, &g->clr_falling);
+	writel_relaxed(mask, &g->clr_rising);
+}
+
+static void gpio_irq_enable(struct irq_data *d)
+{
+	struct davinci_gpio_regs __iomem *g = irq2regs(d);
+	uintptr_t mask = (uintptr_t)irq_data_get_irq_handler_data(d);
+	unsigned status = irqd_get_trigger_type(d);
+
+	status &= IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING;
+	if (!status)
+		status = IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING;
+
+	if (status & IRQ_TYPE_EDGE_FALLING)
+		writel_relaxed(mask, &g->set_falling);
+	if (status & IRQ_TYPE_EDGE_RISING)
+		writel_relaxed(mask, &g->set_rising);
+}
+
+static int gpio_irq_type(struct irq_data *d, unsigned trigger)
+{
+	if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
+		return -EINVAL;
+
+	return 0;
+}
+
+static struct irq_chip gpio_irqchip = {
+	.name		= "GPIO",
+	.irq_enable	= gpio_irq_enable,
+	.irq_disable	= gpio_irq_disable,
+	.irq_set_type	= gpio_irq_type,
+	.flags		= IRQCHIP_SET_TYPE_MASKED | IRQCHIP_SKIP_SET_WAKE,
+};
+
+static void gpio_irq_handler(struct irq_desc *desc)
+{
+	struct davinci_gpio_regs __iomem *g;
+	u32 mask = 0xffff;
+	int bank_num;
+	struct davinci_gpio_controller *d;
+	struct davinci_gpio_irq_data *irqdata;
+
+	irqdata = (struct davinci_gpio_irq_data *)irq_desc_get_handler_data(desc);
+	bank_num = irqdata->bank_num;
+	g = irqdata->regs;
+	d = irqdata->chip;
+
+	/* we only care about one bank */
+	if ((bank_num % 2) == 1)
+		mask <<= 16;
+
+	/* temporarily mask (level sensitive) parent IRQ */
+	chained_irq_enter(irq_desc_get_chip(desc), desc);
+	while (1) {
+		u32		status;
+		int		bit;
+		irq_hw_number_t hw_irq;
+
+		/* ack any irqs */
+		status = readl_relaxed(&g->intstat) & mask;
+		if (!status)
+			break;
+		writel_relaxed(status, &g->intstat);
+
+		/* now demux them to the right lowlevel handler */
+
+		while (status) {
+			bit = __ffs(status);
+			status &= ~BIT(bit);
+			/* Max number of gpios per controller is 144 so
+			 * hw_irq will be in [0..143]
+			 */
+			hw_irq = (bank_num / 2) * 32 + bit;
+
+			generic_handle_irq(
+				irq_find_mapping(d->irq_domain, hw_irq));
+		}
+	}
+	chained_irq_exit(irq_desc_get_chip(desc), desc);
+	/* now it may re-trigger */
+}
+
+static int gpio_to_irq_banked(struct gpio_chip *chip, unsigned offset)
+{
+	struct davinci_gpio_controller *d = gpiochip_get_data(chip);
+
+	if (d->irq_domain)
+		return irq_create_mapping(d->irq_domain, offset);
+	else
+		return -ENXIO;
+}
+
+static int gpio_to_irq_unbanked(struct gpio_chip *chip, unsigned offset)
+{
+	struct davinci_gpio_controller *d = gpiochip_get_data(chip);
+
+	/*
+	 * NOTE:  we assume for now that only irqs in the first gpio_chip
+	 * can provide direct-mapped IRQs to AINTC (up to 32 GPIOs).
+	 */
+	if (offset < d->gpio_unbanked)
+		return d->irqs[offset];
+	else
+		return -ENODEV;
+}
+
+static int gpio_irq_type_unbanked(struct irq_data *data, unsigned trigger)
+{
+	struct davinci_gpio_controller *d;
+	struct davinci_gpio_regs __iomem *g;
+	u32 mask, i;
+
+	d = (struct davinci_gpio_controller *)irq_data_get_irq_handler_data(data);
+	g = (struct davinci_gpio_regs __iomem *)d->regs[0];
+	for (i = 0; i < MAX_INT_PER_BANK; i++)
+		if (data->irq == d->irqs[i])
+			break;
+
+	if (i == MAX_INT_PER_BANK)
+		return -EINVAL;
+
+	mask = __gpio_mask(i);
+
+	if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
+		return -EINVAL;
+
+	writel_relaxed(mask, (trigger & IRQ_TYPE_EDGE_FALLING)
+		     ? &g->set_falling : &g->clr_falling);
+	writel_relaxed(mask, (trigger & IRQ_TYPE_EDGE_RISING)
+		     ? &g->set_rising : &g->clr_rising);
+
+	return 0;
+}
+
+static int
+davinci_gpio_irq_map(struct irq_domain *d, unsigned int irq,
+		     irq_hw_number_t hw)
+{
+	struct davinci_gpio_controller *chips =
+				(struct davinci_gpio_controller *)d->host_data;
+	struct davinci_gpio_regs __iomem *g = chips->regs[hw / 32];
+
+	irq_set_chip_and_handler_name(irq, &gpio_irqchip, handle_simple_irq,
+				"davinci_gpio");
+	irq_set_irq_type(irq, IRQ_TYPE_NONE);
+	irq_set_chip_data(irq, (__force void *)g);
+	irq_set_handler_data(irq, (void *)(uintptr_t)__gpio_mask(hw));
+
+	return 0;
+}
+
+static const struct irq_domain_ops davinci_gpio_irq_ops = {
+	.map = davinci_gpio_irq_map,
+	.xlate = irq_domain_xlate_onetwocell,
+};
+
+static struct irq_chip *davinci_gpio_get_irq_chip(unsigned int irq)
+{
+	static struct irq_chip_type gpio_unbanked;
+
+	gpio_unbanked = *irq_data_get_chip_type(irq_get_irq_data(irq));
+
+	return &gpio_unbanked.chip;
+};
+
+static struct irq_chip *keystone_gpio_get_irq_chip(unsigned int irq)
+{
+	static struct irq_chip gpio_unbanked;
+
+	gpio_unbanked = *irq_get_chip(irq);
+	return &gpio_unbanked;
+};
+
+static const struct of_device_id davinci_gpio_ids[];
+
+/*
+ * NOTE:  for suspend/resume, probably best to make a platform_device with
+ * suspend_late/resume_resume calls hooking into results of the set_wake()
+ * calls ... so if no gpios are wakeup events the clock can be disabled,
+ * with outputs left at previously set levels, and so that VDD3P3V.IOPWDN0
+ * (dm6446) can be set appropriately for GPIOV33 pins.
+ */
+
+static int davinci_gpio_irq_setup(struct platform_device *pdev)
+{
+	unsigned	gpio, bank;
+	int		irq;
+	int		ret;
+	struct clk	*clk;
+	u32		binten = 0;
+	unsigned	ngpio;
+	struct device *dev = &pdev->dev;
+	struct davinci_gpio_controller *chips = platform_get_drvdata(pdev);
+	struct davinci_gpio_platform_data *pdata = dev->platform_data;
+	struct davinci_gpio_regs __iomem *g;
+	struct irq_domain	*irq_domain = NULL;
+	const struct of_device_id *match;
+	struct irq_chip *irq_chip;
+	struct davinci_gpio_irq_data *irqdata;
+	gpio_get_irq_chip_cb_t gpio_get_irq_chip;
+
+	/*
+	 * Use davinci_gpio_get_irq_chip by default to handle non DT cases
+	 */
+	gpio_get_irq_chip = davinci_gpio_get_irq_chip;
+	match = of_match_device(of_match_ptr(davinci_gpio_ids),
+				dev);
+	if (match)
+		gpio_get_irq_chip = (gpio_get_irq_chip_cb_t)match->data;
+
+	ngpio = pdata->ngpio;
+
+	clk = devm_clk_get(dev, "gpio");
+	if (IS_ERR(clk)) {
+		dev_err(dev, "Error %ld getting gpio clock\n", PTR_ERR(clk));
+		return PTR_ERR(clk);
+	}
+
+	ret = clk_prepare_enable(clk);
+	if (ret)
+		return ret;
+
+	if (!pdata->gpio_unbanked) {
+		irq = devm_irq_alloc_descs(dev, -1, 0, ngpio, 0);
+		if (irq < 0) {
+			dev_err(dev, "Couldn't allocate IRQ numbers\n");
+			clk_disable_unprepare(clk);
+			return irq;
+		}
+
+		irq_domain = irq_domain_add_legacy(dev->of_node, ngpio, irq, 0,
+							&davinci_gpio_irq_ops,
+							chips);
+		if (!irq_domain) {
+			dev_err(dev, "Couldn't register an IRQ domain\n");
+			clk_disable_unprepare(clk);
+			return -ENODEV;
+		}
+	}
+
+	/*
+	 * Arrange gpio_to_irq() support, handling either direct IRQs or
+	 * banked IRQs.  Having GPIOs in the first GPIO bank use direct
+	 * IRQs, while the others use banked IRQs, would need some setup
+	 * tweaks to recognize hardware which can do that.
+	 */
+	chips->chip.to_irq = gpio_to_irq_banked;
+	chips->irq_domain = irq_domain;
+
+	/*
+	 * AINTC can handle direct/unbanked IRQs for GPIOs, with the GPIO
+	 * controller only handling trigger modes.  We currently assume no
+	 * IRQ mux conflicts; gpio_irq_type_unbanked() is only for GPIOs.
+	 */
+	if (pdata->gpio_unbanked) {
+		/* pass "bank 0" GPIO IRQs to AINTC */
+		chips->chip.to_irq = gpio_to_irq_unbanked;
+		chips->gpio_unbanked = pdata->gpio_unbanked;
+		binten = GENMASK(pdata->gpio_unbanked / 16, 0);
+
+		/* AINTC handles mask/unmask; GPIO handles triggering */
+		irq = chips->irqs[0];
+		irq_chip = gpio_get_irq_chip(irq);
+		irq_chip->name = "GPIO-AINTC";
+		irq_chip->irq_set_type = gpio_irq_type_unbanked;
+
+		/* default trigger: both edges */
+		g = chips->regs[0];
+		writel_relaxed(~0, &g->set_falling);
+		writel_relaxed(~0, &g->set_rising);
+
+		/* set the direct IRQs up to use that irqchip */
+		for (gpio = 0; gpio < pdata->gpio_unbanked; gpio++) {
+			irq_set_chip(chips->irqs[gpio], irq_chip);
+			irq_set_handler_data(chips->irqs[gpio], chips);
+			irq_set_status_flags(chips->irqs[gpio],
+					     IRQ_TYPE_EDGE_BOTH);
+		}
+
+		goto done;
+	}
+
+	/*
+	 * Or, AINTC can handle IRQs for banks of 16 GPIO IRQs, which we
+	 * then chain through our own handler.
+	 */
+	for (gpio = 0, bank = 0; gpio < ngpio; bank++, gpio += 16) {
+		/* disabled by default, enabled only as needed
+		 * There are register sets for 32 GPIOs. 2 banks of 16
+		 * GPIOs are covered by each set of registers hence divide by 2
+		 */
+		g = chips->regs[bank / 2];
+		writel_relaxed(~0, &g->clr_falling);
+		writel_relaxed(~0, &g->clr_rising);
+
+		/*
+		 * Each chip handles 32 gpios, and each irq bank consists of 16
+		 * gpio irqs. Pass the irq bank's corresponding controller to
+		 * the chained irq handler.
+		 */
+		irqdata = devm_kzalloc(&pdev->dev,
+				       sizeof(struct
+					      davinci_gpio_irq_data),
+					      GFP_KERNEL);
+		if (!irqdata) {
+			clk_disable_unprepare(clk);
+			return -ENOMEM;
+		}
+
+		irqdata->regs = g;
+		irqdata->bank_num = bank;
+		irqdata->chip = chips;
+
+		irq_set_chained_handler_and_data(chips->irqs[bank],
+						 gpio_irq_handler, irqdata);
+
+		binten |= BIT(bank);
+	}
+
+done:
+	/*
+	 * BINTEN -- per-bank interrupt enable. genirq would also let these
+	 * bits be set/cleared dynamically.
+	 */
+	writel_relaxed(binten, gpio_base + BINTEN);
+
+	return 0;
+}
+
+static const struct of_device_id davinci_gpio_ids[] = {
+	{ .compatible = "ti,keystone-gpio", keystone_gpio_get_irq_chip},
+	{ .compatible = "ti,am654-gpio", keystone_gpio_get_irq_chip},
+	{ .compatible = "ti,dm6441-gpio", davinci_gpio_get_irq_chip},
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, davinci_gpio_ids);
+
+static struct platform_driver davinci_gpio_driver = {
+	.probe		= davinci_gpio_probe,
+	.driver		= {
+		.name		= "davinci_gpio",
+		.of_match_table	= of_match_ptr(davinci_gpio_ids),
+	},
+};
+
+/**
+ * GPIO driver registration needs to be done before machine_init functions
+ * access GPIO. Hence davinci_gpio_drv_reg() is a postcore_initcall.
+ */
+static int __init davinci_gpio_drv_reg(void)
+{
+	return platform_driver_register(&davinci_gpio_driver);
+}
+postcore_initcall(davinci_gpio_drv_reg);
diff --git a/drivers/gpio/gpio-dln2.c b/drivers/gpio/gpio-dln2.c
new file mode 100644
index 000000000..22f11dd52
--- /dev/null
+++ b/drivers/gpio/gpio-dln2.c
@@ -0,0 +1,524 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Driver for the Diolan DLN-2 USB-GPIO adapter
+ *
+ * Copyright (c) 2014 Intel Corporation
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/irqdomain.h>
+#include <linux/irq.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/gpio/driver.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/dln2.h>
+
+#define DLN2_GPIO_ID			0x01
+
+#define DLN2_GPIO_GET_PIN_COUNT		DLN2_CMD(0x01, DLN2_GPIO_ID)
+#define DLN2_GPIO_SET_DEBOUNCE		DLN2_CMD(0x04, DLN2_GPIO_ID)
+#define DLN2_GPIO_GET_DEBOUNCE		DLN2_CMD(0x05, DLN2_GPIO_ID)
+#define DLN2_GPIO_PORT_GET_VAL		DLN2_CMD(0x06, DLN2_GPIO_ID)
+#define DLN2_GPIO_PIN_GET_VAL		DLN2_CMD(0x0B, DLN2_GPIO_ID)
+#define DLN2_GPIO_PIN_SET_OUT_VAL	DLN2_CMD(0x0C, DLN2_GPIO_ID)
+#define DLN2_GPIO_PIN_GET_OUT_VAL	DLN2_CMD(0x0D, DLN2_GPIO_ID)
+#define DLN2_GPIO_CONDITION_MET_EV	DLN2_CMD(0x0F, DLN2_GPIO_ID)
+#define DLN2_GPIO_PIN_ENABLE		DLN2_CMD(0x10, DLN2_GPIO_ID)
+#define DLN2_GPIO_PIN_DISABLE		DLN2_CMD(0x11, DLN2_GPIO_ID)
+#define DLN2_GPIO_PIN_SET_DIRECTION	DLN2_CMD(0x13, DLN2_GPIO_ID)
+#define DLN2_GPIO_PIN_GET_DIRECTION	DLN2_CMD(0x14, DLN2_GPIO_ID)
+#define DLN2_GPIO_PIN_SET_EVENT_CFG	DLN2_CMD(0x1E, DLN2_GPIO_ID)
+#define DLN2_GPIO_PIN_GET_EVENT_CFG	DLN2_CMD(0x1F, DLN2_GPIO_ID)
+
+#define DLN2_GPIO_EVENT_NONE		0
+#define DLN2_GPIO_EVENT_CHANGE		1
+#define DLN2_GPIO_EVENT_LVL_HIGH	2
+#define DLN2_GPIO_EVENT_LVL_LOW		3
+#define DLN2_GPIO_EVENT_CHANGE_RISING	0x11
+#define DLN2_GPIO_EVENT_CHANGE_FALLING  0x21
+#define DLN2_GPIO_EVENT_MASK		0x0F
+
+#define DLN2_GPIO_MAX_PINS 32
+
+struct dln2_gpio {
+	struct platform_device *pdev;
+	struct gpio_chip gpio;
+	struct irq_chip irqchip;
+
+	/*
+	 * Cache pin direction to save us one transfer, since the hardware has
+	 * separate commands to read the in and out values.
+	 */
+	DECLARE_BITMAP(output_enabled, DLN2_GPIO_MAX_PINS);
+
+	/* active IRQs - not synced to hardware */
+	DECLARE_BITMAP(unmasked_irqs, DLN2_GPIO_MAX_PINS);
+	/* active IRQS - synced to hardware */
+	DECLARE_BITMAP(enabled_irqs, DLN2_GPIO_MAX_PINS);
+	int irq_type[DLN2_GPIO_MAX_PINS];
+	struct mutex irq_lock;
+};
+
+struct dln2_gpio_pin {
+	__le16 pin;
+};
+
+struct dln2_gpio_pin_val {
+	__le16 pin __packed;
+	u8 value;
+};
+
+static int dln2_gpio_get_pin_count(struct platform_device *pdev)
+{
+	int ret;
+	__le16 count;
+	int len = sizeof(count);
+
+	ret = dln2_transfer_rx(pdev, DLN2_GPIO_GET_PIN_COUNT, &count, &len);
+	if (ret < 0)
+		return ret;
+	if (len < sizeof(count))
+		return -EPROTO;
+
+	return le16_to_cpu(count);
+}
+
+static int dln2_gpio_pin_cmd(struct dln2_gpio *dln2, int cmd, unsigned pin)
+{
+	struct dln2_gpio_pin req = {
+		.pin = cpu_to_le16(pin),
+	};
+
+	return dln2_transfer_tx(dln2->pdev, cmd, &req, sizeof(req));
+}
+
+static int dln2_gpio_pin_val(struct dln2_gpio *dln2, int cmd, unsigned int pin)
+{
+	int ret;
+	struct dln2_gpio_pin req = {
+		.pin = cpu_to_le16(pin),
+	};
+	struct dln2_gpio_pin_val rsp;
+	int len = sizeof(rsp);
+
+	ret = dln2_transfer(dln2->pdev, cmd, &req, sizeof(req), &rsp, &len);
+	if (ret < 0)
+		return ret;
+	if (len < sizeof(rsp) || req.pin != rsp.pin)
+		return -EPROTO;
+
+	return rsp.value;
+}
+
+static int dln2_gpio_pin_get_in_val(struct dln2_gpio *dln2, unsigned int pin)
+{
+	int ret;
+
+	ret = dln2_gpio_pin_val(dln2, DLN2_GPIO_PIN_GET_VAL, pin);
+	if (ret < 0)
+		return ret;
+	return !!ret;
+}
+
+static int dln2_gpio_pin_get_out_val(struct dln2_gpio *dln2, unsigned int pin)
+{
+	int ret;
+
+	ret = dln2_gpio_pin_val(dln2, DLN2_GPIO_PIN_GET_OUT_VAL, pin);
+	if (ret < 0)
+		return ret;
+	return !!ret;
+}
+
+static int dln2_gpio_pin_set_out_val(struct dln2_gpio *dln2,
+				     unsigned int pin, int value)
+{
+	struct dln2_gpio_pin_val req = {
+		.pin = cpu_to_le16(pin),
+		.value = value,
+	};
+
+	return dln2_transfer_tx(dln2->pdev, DLN2_GPIO_PIN_SET_OUT_VAL, &req,
+				sizeof(req));
+}
+
+#define DLN2_GPIO_DIRECTION_IN		0
+#define DLN2_GPIO_DIRECTION_OUT		1
+
+static int dln2_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+	struct dln2_gpio *dln2 = gpiochip_get_data(chip);
+	struct dln2_gpio_pin req = {
+		.pin = cpu_to_le16(offset),
+	};
+	struct dln2_gpio_pin_val rsp;
+	int len = sizeof(rsp);
+	int ret;
+
+	ret = dln2_gpio_pin_cmd(dln2, DLN2_GPIO_PIN_ENABLE, offset);
+	if (ret < 0)
+		return ret;
+
+	/* cache the pin direction */
+	ret = dln2_transfer(dln2->pdev, DLN2_GPIO_PIN_GET_DIRECTION,
+			    &req, sizeof(req), &rsp, &len);
+	if (ret < 0)
+		return ret;
+	if (len < sizeof(rsp) || req.pin != rsp.pin) {
+		ret = -EPROTO;
+		goto out_disable;
+	}
+
+	switch (rsp.value) {
+	case DLN2_GPIO_DIRECTION_IN:
+		clear_bit(offset, dln2->output_enabled);
+		return 0;
+	case DLN2_GPIO_DIRECTION_OUT:
+		set_bit(offset, dln2->output_enabled);
+		return 0;
+	default:
+		ret = -EPROTO;
+		goto out_disable;
+	}
+
+out_disable:
+	dln2_gpio_pin_cmd(dln2, DLN2_GPIO_PIN_DISABLE, offset);
+	return ret;
+}
+
+static void dln2_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+	struct dln2_gpio *dln2 = gpiochip_get_data(chip);
+
+	dln2_gpio_pin_cmd(dln2, DLN2_GPIO_PIN_DISABLE, offset);
+}
+
+static int dln2_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
+{
+	struct dln2_gpio *dln2 = gpiochip_get_data(chip);
+
+	if (test_bit(offset, dln2->output_enabled))
+		return GPIO_LINE_DIRECTION_OUT;
+
+	return GPIO_LINE_DIRECTION_IN;
+}
+
+static int dln2_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+	struct dln2_gpio *dln2 = gpiochip_get_data(chip);
+	int dir;
+
+	dir = dln2_gpio_get_direction(chip, offset);
+	if (dir < 0)
+		return dir;
+
+	if (dir == GPIO_LINE_DIRECTION_IN)
+		return dln2_gpio_pin_get_in_val(dln2, offset);
+
+	return dln2_gpio_pin_get_out_val(dln2, offset);
+}
+
+static void dln2_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct dln2_gpio *dln2 = gpiochip_get_data(chip);
+
+	dln2_gpio_pin_set_out_val(dln2, offset, value);
+}
+
+static int dln2_gpio_set_direction(struct gpio_chip *chip, unsigned offset,
+				   unsigned dir)
+{
+	struct dln2_gpio *dln2 = gpiochip_get_data(chip);
+	struct dln2_gpio_pin_val req = {
+		.pin = cpu_to_le16(offset),
+		.value = dir,
+	};
+	int ret;
+
+	ret = dln2_transfer_tx(dln2->pdev, DLN2_GPIO_PIN_SET_DIRECTION,
+			       &req, sizeof(req));
+	if (ret < 0)
+		return ret;
+
+	if (dir == DLN2_GPIO_DIRECTION_OUT)
+		set_bit(offset, dln2->output_enabled);
+	else
+		clear_bit(offset, dln2->output_enabled);
+
+	return ret;
+}
+
+static int dln2_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	return dln2_gpio_set_direction(chip, offset, DLN2_GPIO_DIRECTION_IN);
+}
+
+static int dln2_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
+				      int value)
+{
+	struct dln2_gpio *dln2 = gpiochip_get_data(chip);
+	int ret;
+
+	ret = dln2_gpio_pin_set_out_val(dln2, offset, value);
+	if (ret < 0)
+		return ret;
+
+	return dln2_gpio_set_direction(chip, offset, DLN2_GPIO_DIRECTION_OUT);
+}
+
+static int dln2_gpio_set_config(struct gpio_chip *chip, unsigned offset,
+				unsigned long config)
+{
+	struct dln2_gpio *dln2 = gpiochip_get_data(chip);
+	__le32 duration;
+
+	if (pinconf_to_config_param(config) != PIN_CONFIG_INPUT_DEBOUNCE)
+		return -ENOTSUPP;
+
+	duration = cpu_to_le32(pinconf_to_config_argument(config));
+	return dln2_transfer_tx(dln2->pdev, DLN2_GPIO_SET_DEBOUNCE,
+				&duration, sizeof(duration));
+}
+
+static int dln2_gpio_set_event_cfg(struct dln2_gpio *dln2, unsigned pin,
+				   unsigned type, unsigned period)
+{
+	struct {
+		__le16 pin;
+		u8 type;
+		__le16 period;
+	} __packed req = {
+		.pin = cpu_to_le16(pin),
+		.type = type,
+		.period = cpu_to_le16(period),
+	};
+
+	return dln2_transfer_tx(dln2->pdev, DLN2_GPIO_PIN_SET_EVENT_CFG,
+				&req, sizeof(req));
+}
+
+static void dln2_irq_unmask(struct irq_data *irqd)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
+	struct dln2_gpio *dln2 = gpiochip_get_data(gc);
+	int pin = irqd_to_hwirq(irqd);
+
+	set_bit(pin, dln2->unmasked_irqs);
+}
+
+static void dln2_irq_mask(struct irq_data *irqd)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
+	struct dln2_gpio *dln2 = gpiochip_get_data(gc);
+	int pin = irqd_to_hwirq(irqd);
+
+	clear_bit(pin, dln2->unmasked_irqs);
+}
+
+static int dln2_irq_set_type(struct irq_data *irqd, unsigned type)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
+	struct dln2_gpio *dln2 = gpiochip_get_data(gc);
+	int pin = irqd_to_hwirq(irqd);
+
+	switch (type) {
+	case IRQ_TYPE_LEVEL_HIGH:
+		dln2->irq_type[pin] = DLN2_GPIO_EVENT_LVL_HIGH;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		dln2->irq_type[pin] = DLN2_GPIO_EVENT_LVL_LOW;
+		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		dln2->irq_type[pin] = DLN2_GPIO_EVENT_CHANGE;
+		break;
+	case IRQ_TYPE_EDGE_RISING:
+		dln2->irq_type[pin] = DLN2_GPIO_EVENT_CHANGE_RISING;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		dln2->irq_type[pin] = DLN2_GPIO_EVENT_CHANGE_FALLING;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void dln2_irq_bus_lock(struct irq_data *irqd)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
+	struct dln2_gpio *dln2 = gpiochip_get_data(gc);
+
+	mutex_lock(&dln2->irq_lock);
+}
+
+static void dln2_irq_bus_unlock(struct irq_data *irqd)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
+	struct dln2_gpio *dln2 = gpiochip_get_data(gc);
+	int pin = irqd_to_hwirq(irqd);
+	int enabled, unmasked;
+	unsigned type;
+	int ret;
+
+	enabled = test_bit(pin, dln2->enabled_irqs);
+	unmasked = test_bit(pin, dln2->unmasked_irqs);
+
+	if (enabled != unmasked) {
+		if (unmasked) {
+			type = dln2->irq_type[pin] & DLN2_GPIO_EVENT_MASK;
+			set_bit(pin, dln2->enabled_irqs);
+		} else {
+			type = DLN2_GPIO_EVENT_NONE;
+			clear_bit(pin, dln2->enabled_irqs);
+		}
+
+		ret = dln2_gpio_set_event_cfg(dln2, pin, type, 0);
+		if (ret)
+			dev_err(dln2->gpio.parent, "failed to set event\n");
+	}
+
+	mutex_unlock(&dln2->irq_lock);
+}
+
+static void dln2_gpio_event(struct platform_device *pdev, u16 echo,
+			    const void *data, int len)
+{
+	int pin, irq;
+
+	const struct {
+		__le16 count;
+		__u8 type;
+		__le16 pin;
+		__u8 value;
+	} __packed *event = data;
+	struct dln2_gpio *dln2 = platform_get_drvdata(pdev);
+
+	if (len < sizeof(*event)) {
+		dev_err(dln2->gpio.parent, "short event message\n");
+		return;
+	}
+
+	pin = le16_to_cpu(event->pin);
+	if (pin >= dln2->gpio.ngpio) {
+		dev_err(dln2->gpio.parent, "out of bounds pin %d\n", pin);
+		return;
+	}
+
+	irq = irq_find_mapping(dln2->gpio.irq.domain, pin);
+	if (!irq) {
+		dev_err(dln2->gpio.parent, "pin %d not mapped to IRQ\n", pin);
+		return;
+	}
+
+	switch (dln2->irq_type[pin]) {
+	case DLN2_GPIO_EVENT_CHANGE_RISING:
+		if (event->value)
+			generic_handle_irq(irq);
+		break;
+	case DLN2_GPIO_EVENT_CHANGE_FALLING:
+		if (!event->value)
+			generic_handle_irq(irq);
+		break;
+	default:
+		generic_handle_irq(irq);
+	}
+}
+
+static int dln2_gpio_probe(struct platform_device *pdev)
+{
+	struct dln2_gpio *dln2;
+	struct device *dev = &pdev->dev;
+	struct gpio_irq_chip *girq;
+	int pins;
+	int ret;
+
+	pins = dln2_gpio_get_pin_count(pdev);
+	if (pins < 0) {
+		dev_err(dev, "failed to get pin count: %d\n", pins);
+		return pins;
+	}
+	if (pins > DLN2_GPIO_MAX_PINS) {
+		pins = DLN2_GPIO_MAX_PINS;
+		dev_warn(dev, "clamping pins to %d\n", DLN2_GPIO_MAX_PINS);
+	}
+
+	dln2 = devm_kzalloc(&pdev->dev, sizeof(*dln2), GFP_KERNEL);
+	if (!dln2)
+		return -ENOMEM;
+
+	mutex_init(&dln2->irq_lock);
+
+	dln2->pdev = pdev;
+
+	dln2->gpio.label = "dln2";
+	dln2->gpio.parent = dev;
+	dln2->gpio.owner = THIS_MODULE;
+	dln2->gpio.base = -1;
+	dln2->gpio.ngpio = pins;
+	dln2->gpio.can_sleep = true;
+	dln2->gpio.set = dln2_gpio_set;
+	dln2->gpio.get = dln2_gpio_get;
+	dln2->gpio.request = dln2_gpio_request;
+	dln2->gpio.free = dln2_gpio_free;
+	dln2->gpio.get_direction = dln2_gpio_get_direction;
+	dln2->gpio.direction_input = dln2_gpio_direction_input;
+	dln2->gpio.direction_output = dln2_gpio_direction_output;
+	dln2->gpio.set_config = dln2_gpio_set_config;
+
+	dln2->irqchip.name = "dln2-irq",
+	dln2->irqchip.irq_mask = dln2_irq_mask,
+	dln2->irqchip.irq_unmask = dln2_irq_unmask,
+	dln2->irqchip.irq_set_type = dln2_irq_set_type,
+	dln2->irqchip.irq_bus_lock = dln2_irq_bus_lock,
+	dln2->irqchip.irq_bus_sync_unlock = dln2_irq_bus_unlock,
+
+	girq = &dln2->gpio.irq;
+	girq->chip = &dln2->irqchip;
+	/* The event comes from the outside so no parent handler */
+	girq->parent_handler = NULL;
+	girq->num_parents = 0;
+	girq->parents = NULL;
+	girq->default_type = IRQ_TYPE_NONE;
+	girq->handler = handle_simple_irq;
+
+	platform_set_drvdata(pdev, dln2);
+
+	ret = devm_gpiochip_add_data(dev, &dln2->gpio, dln2);
+	if (ret < 0) {
+		dev_err(dev, "failed to add gpio chip: %d\n", ret);
+		return ret;
+	}
+
+	ret = dln2_register_event_cb(pdev, DLN2_GPIO_CONDITION_MET_EV,
+				     dln2_gpio_event);
+	if (ret) {
+		dev_err(dev, "failed to register event cb: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int dln2_gpio_remove(struct platform_device *pdev)
+{
+	dln2_unregister_event_cb(pdev, DLN2_GPIO_CONDITION_MET_EV);
+
+	return 0;
+}
+
+static struct platform_driver dln2_gpio_driver = {
+	.driver.name	= "dln2-gpio",
+	.probe		= dln2_gpio_probe,
+	.remove		= dln2_gpio_remove,
+};
+
+module_platform_driver(dln2_gpio_driver);
+
+MODULE_AUTHOR("Daniel Baluta <daniel.baluta@intel.com");
+MODULE_DESCRIPTION("Driver for the Diolan DLN2 GPIO interface");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:dln2-gpio");
diff --git a/drivers/gpio/gpio-dwapb.c b/drivers/gpio/gpio-dwapb.c
new file mode 100644
index 000000000..ea2e2618b
--- /dev/null
+++ b/drivers/gpio/gpio-dwapb.c
@@ -0,0 +1,837 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2011 Jamie Iles
+ *
+ * All enquiries to support@picochip.com
+ */
+#include <linux/acpi.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/gpio/driver.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/reset.h>
+#include <linux/spinlock.h>
+#include <linux/platform_data/gpio-dwapb.h>
+#include <linux/slab.h>
+
+#include "gpiolib.h"
+#include "gpiolib-acpi.h"
+
+#define GPIO_SWPORTA_DR		0x00
+#define GPIO_SWPORTA_DDR	0x04
+#define GPIO_SWPORTB_DR		0x0c
+#define GPIO_SWPORTB_DDR	0x10
+#define GPIO_SWPORTC_DR		0x18
+#define GPIO_SWPORTC_DDR	0x1c
+#define GPIO_SWPORTD_DR		0x24
+#define GPIO_SWPORTD_DDR	0x28
+#define GPIO_INTEN		0x30
+#define GPIO_INTMASK		0x34
+#define GPIO_INTTYPE_LEVEL	0x38
+#define GPIO_INT_POLARITY	0x3c
+#define GPIO_INTSTATUS		0x40
+#define GPIO_PORTA_DEBOUNCE	0x48
+#define GPIO_PORTA_EOI		0x4c
+#define GPIO_EXT_PORTA		0x50
+#define GPIO_EXT_PORTB		0x54
+#define GPIO_EXT_PORTC		0x58
+#define GPIO_EXT_PORTD		0x5c
+
+#define DWAPB_DRIVER_NAME	"gpio-dwapb"
+#define DWAPB_MAX_PORTS		4
+
+#define GPIO_EXT_PORT_STRIDE	0x04 /* register stride 32 bits */
+#define GPIO_SWPORT_DR_STRIDE	0x0c /* register stride 3*32 bits */
+#define GPIO_SWPORT_DDR_STRIDE	0x0c /* register stride 3*32 bits */
+
+#define GPIO_REG_OFFSET_V2	1
+
+#define GPIO_INTMASK_V2		0x44
+#define GPIO_INTTYPE_LEVEL_V2	0x34
+#define GPIO_INT_POLARITY_V2	0x38
+#define GPIO_INTSTATUS_V2	0x3c
+#define GPIO_PORTA_EOI_V2	0x40
+
+#define DWAPB_NR_CLOCKS		2
+
+struct dwapb_gpio;
+
+#ifdef CONFIG_PM_SLEEP
+/* Store GPIO context across system-wide suspend/resume transitions */
+struct dwapb_context {
+	u32 data;
+	u32 dir;
+	u32 ext;
+	u32 int_en;
+	u32 int_mask;
+	u32 int_type;
+	u32 int_pol;
+	u32 int_deb;
+	u32 wake_en;
+};
+#endif
+
+struct dwapb_gpio_port_irqchip {
+	struct irq_chip		irqchip;
+	unsigned int		nr_irqs;
+	unsigned int		irq[DWAPB_MAX_GPIOS];
+};
+
+struct dwapb_gpio_port {
+	struct gpio_chip	gc;
+	struct dwapb_gpio_port_irqchip *pirq;
+	struct dwapb_gpio	*gpio;
+#ifdef CONFIG_PM_SLEEP
+	struct dwapb_context	*ctx;
+#endif
+	unsigned int		idx;
+};
+#define to_dwapb_gpio(_gc) \
+	(container_of(_gc, struct dwapb_gpio_port, gc)->gpio)
+
+struct dwapb_gpio {
+	struct	device		*dev;
+	void __iomem		*regs;
+	struct dwapb_gpio_port	*ports;
+	unsigned int		nr_ports;
+	unsigned int		flags;
+	struct reset_control	*rst;
+	struct clk_bulk_data	clks[DWAPB_NR_CLOCKS];
+};
+
+static inline u32 gpio_reg_v2_convert(unsigned int offset)
+{
+	switch (offset) {
+	case GPIO_INTMASK:
+		return GPIO_INTMASK_V2;
+	case GPIO_INTTYPE_LEVEL:
+		return GPIO_INTTYPE_LEVEL_V2;
+	case GPIO_INT_POLARITY:
+		return GPIO_INT_POLARITY_V2;
+	case GPIO_INTSTATUS:
+		return GPIO_INTSTATUS_V2;
+	case GPIO_PORTA_EOI:
+		return GPIO_PORTA_EOI_V2;
+	}
+
+	return offset;
+}
+
+static inline u32 gpio_reg_convert(struct dwapb_gpio *gpio, unsigned int offset)
+{
+	if (gpio->flags & GPIO_REG_OFFSET_V2)
+		return gpio_reg_v2_convert(offset);
+
+	return offset;
+}
+
+static inline u32 dwapb_read(struct dwapb_gpio *gpio, unsigned int offset)
+{
+	struct gpio_chip *gc	= &gpio->ports[0].gc;
+	void __iomem *reg_base	= gpio->regs;
+
+	return gc->read_reg(reg_base + gpio_reg_convert(gpio, offset));
+}
+
+static inline void dwapb_write(struct dwapb_gpio *gpio, unsigned int offset,
+			       u32 val)
+{
+	struct gpio_chip *gc	= &gpio->ports[0].gc;
+	void __iomem *reg_base	= gpio->regs;
+
+	gc->write_reg(reg_base + gpio_reg_convert(gpio, offset), val);
+}
+
+static struct dwapb_gpio_port *dwapb_offs_to_port(struct dwapb_gpio *gpio, unsigned int offs)
+{
+	struct dwapb_gpio_port *port;
+	int i;
+
+	for (i = 0; i < gpio->nr_ports; i++) {
+		port = &gpio->ports[i];
+		if (port->idx == offs / DWAPB_MAX_GPIOS)
+			return port;
+	}
+
+	return NULL;
+}
+
+static void dwapb_toggle_trigger(struct dwapb_gpio *gpio, unsigned int offs)
+{
+	struct dwapb_gpio_port *port = dwapb_offs_to_port(gpio, offs);
+	struct gpio_chip *gc;
+	u32 pol;
+	int val;
+
+	if (!port)
+		return;
+	gc = &port->gc;
+
+	pol = dwapb_read(gpio, GPIO_INT_POLARITY);
+	/* Just read the current value right out of the data register */
+	val = gc->get(gc, offs % DWAPB_MAX_GPIOS);
+	if (val)
+		pol &= ~BIT(offs);
+	else
+		pol |= BIT(offs);
+
+	dwapb_write(gpio, GPIO_INT_POLARITY, pol);
+}
+
+static u32 dwapb_do_irq(struct dwapb_gpio *gpio)
+{
+	struct gpio_chip *gc = &gpio->ports[0].gc;
+	unsigned long irq_status;
+	irq_hw_number_t hwirq;
+
+	irq_status = dwapb_read(gpio, GPIO_INTSTATUS);
+	for_each_set_bit(hwirq, &irq_status, DWAPB_MAX_GPIOS) {
+		int gpio_irq = irq_find_mapping(gc->irq.domain, hwirq);
+		u32 irq_type = irq_get_trigger_type(gpio_irq);
+
+		generic_handle_irq(gpio_irq);
+
+		if ((irq_type & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
+			dwapb_toggle_trigger(gpio, hwirq);
+	}
+
+	return irq_status;
+}
+
+static void dwapb_irq_handler(struct irq_desc *desc)
+{
+	struct dwapb_gpio *gpio = irq_desc_get_handler_data(desc);
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+
+	chained_irq_enter(chip, desc);
+	dwapb_do_irq(gpio);
+	chained_irq_exit(chip, desc);
+}
+
+static irqreturn_t dwapb_irq_handler_mfd(int irq, void *dev_id)
+{
+	return IRQ_RETVAL(dwapb_do_irq(dev_id));
+}
+
+static void dwapb_irq_ack(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct dwapb_gpio *gpio = to_dwapb_gpio(gc);
+	u32 val = BIT(irqd_to_hwirq(d));
+	unsigned long flags;
+
+	spin_lock_irqsave(&gc->bgpio_lock, flags);
+	dwapb_write(gpio, GPIO_PORTA_EOI, val);
+	spin_unlock_irqrestore(&gc->bgpio_lock, flags);
+}
+
+static void dwapb_irq_mask(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct dwapb_gpio *gpio = to_dwapb_gpio(gc);
+	unsigned long flags;
+	u32 val;
+
+	spin_lock_irqsave(&gc->bgpio_lock, flags);
+	val = dwapb_read(gpio, GPIO_INTMASK) | BIT(irqd_to_hwirq(d));
+	dwapb_write(gpio, GPIO_INTMASK, val);
+	spin_unlock_irqrestore(&gc->bgpio_lock, flags);
+}
+
+static void dwapb_irq_unmask(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct dwapb_gpio *gpio = to_dwapb_gpio(gc);
+	unsigned long flags;
+	u32 val;
+
+	spin_lock_irqsave(&gc->bgpio_lock, flags);
+	val = dwapb_read(gpio, GPIO_INTMASK) & ~BIT(irqd_to_hwirq(d));
+	dwapb_write(gpio, GPIO_INTMASK, val);
+	spin_unlock_irqrestore(&gc->bgpio_lock, flags);
+}
+
+static void dwapb_irq_enable(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct dwapb_gpio *gpio = to_dwapb_gpio(gc);
+	unsigned long flags;
+	u32 val;
+
+	spin_lock_irqsave(&gc->bgpio_lock, flags);
+	val = dwapb_read(gpio, GPIO_INTEN);
+	val |= BIT(irqd_to_hwirq(d));
+	dwapb_write(gpio, GPIO_INTEN, val);
+	spin_unlock_irqrestore(&gc->bgpio_lock, flags);
+}
+
+static void dwapb_irq_disable(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct dwapb_gpio *gpio = to_dwapb_gpio(gc);
+	unsigned long flags;
+	u32 val;
+
+	spin_lock_irqsave(&gc->bgpio_lock, flags);
+	val = dwapb_read(gpio, GPIO_INTEN);
+	val &= ~BIT(irqd_to_hwirq(d));
+	dwapb_write(gpio, GPIO_INTEN, val);
+	spin_unlock_irqrestore(&gc->bgpio_lock, flags);
+}
+
+static int dwapb_irq_set_type(struct irq_data *d, u32 type)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct dwapb_gpio *gpio = to_dwapb_gpio(gc);
+	irq_hw_number_t bit = irqd_to_hwirq(d);
+	unsigned long level, polarity, flags;
+
+	if (type & ~IRQ_TYPE_SENSE_MASK)
+		return -EINVAL;
+
+	spin_lock_irqsave(&gc->bgpio_lock, flags);
+	level = dwapb_read(gpio, GPIO_INTTYPE_LEVEL);
+	polarity = dwapb_read(gpio, GPIO_INT_POLARITY);
+
+	switch (type) {
+	case IRQ_TYPE_EDGE_BOTH:
+		level |= BIT(bit);
+		dwapb_toggle_trigger(gpio, bit);
+		break;
+	case IRQ_TYPE_EDGE_RISING:
+		level |= BIT(bit);
+		polarity |= BIT(bit);
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		level |= BIT(bit);
+		polarity &= ~BIT(bit);
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		level &= ~BIT(bit);
+		polarity |= BIT(bit);
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		level &= ~BIT(bit);
+		polarity &= ~BIT(bit);
+		break;
+	}
+
+	if (type & IRQ_TYPE_LEVEL_MASK)
+		irq_set_handler_locked(d, handle_level_irq);
+	else if (type & IRQ_TYPE_EDGE_BOTH)
+		irq_set_handler_locked(d, handle_edge_irq);
+
+	dwapb_write(gpio, GPIO_INTTYPE_LEVEL, level);
+	if (type != IRQ_TYPE_EDGE_BOTH)
+		dwapb_write(gpio, GPIO_INT_POLARITY, polarity);
+	spin_unlock_irqrestore(&gc->bgpio_lock, flags);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int dwapb_irq_set_wake(struct irq_data *d, unsigned int enable)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct dwapb_gpio *gpio = to_dwapb_gpio(gc);
+	struct dwapb_context *ctx = gpio->ports[0].ctx;
+	irq_hw_number_t bit = irqd_to_hwirq(d);
+
+	if (enable)
+		ctx->wake_en |= BIT(bit);
+	else
+		ctx->wake_en &= ~BIT(bit);
+
+	return 0;
+}
+#endif
+
+static int dwapb_gpio_set_debounce(struct gpio_chip *gc,
+				   unsigned offset, unsigned debounce)
+{
+	struct dwapb_gpio_port *port = gpiochip_get_data(gc);
+	struct dwapb_gpio *gpio = port->gpio;
+	unsigned long flags, val_deb;
+	unsigned long mask = BIT(offset);
+
+	spin_lock_irqsave(&gc->bgpio_lock, flags);
+
+	val_deb = dwapb_read(gpio, GPIO_PORTA_DEBOUNCE);
+	if (debounce)
+		val_deb |= mask;
+	else
+		val_deb &= ~mask;
+	dwapb_write(gpio, GPIO_PORTA_DEBOUNCE, val_deb);
+
+	spin_unlock_irqrestore(&gc->bgpio_lock, flags);
+
+	return 0;
+}
+
+static int dwapb_gpio_set_config(struct gpio_chip *gc, unsigned offset,
+				 unsigned long config)
+{
+	u32 debounce;
+
+	if (pinconf_to_config_param(config) != PIN_CONFIG_INPUT_DEBOUNCE)
+		return -ENOTSUPP;
+
+	debounce = pinconf_to_config_argument(config);
+	return dwapb_gpio_set_debounce(gc, offset, debounce);
+}
+
+static int dwapb_convert_irqs(struct dwapb_gpio_port_irqchip *pirq,
+			      struct dwapb_port_property *pp)
+{
+	int i;
+
+	/* Group all available IRQs into an array of parental IRQs. */
+	for (i = 0; i < pp->ngpio; ++i) {
+		if (!pp->irq[i])
+			continue;
+
+		pirq->irq[pirq->nr_irqs++] = pp->irq[i];
+	}
+
+	return pirq->nr_irqs ? 0 : -ENOENT;
+}
+
+static void dwapb_configure_irqs(struct dwapb_gpio *gpio,
+				 struct dwapb_gpio_port *port,
+				 struct dwapb_port_property *pp)
+{
+	struct dwapb_gpio_port_irqchip *pirq;
+	struct gpio_chip *gc = &port->gc;
+	struct gpio_irq_chip *girq;
+	int err;
+
+	pirq = devm_kzalloc(gpio->dev, sizeof(*pirq), GFP_KERNEL);
+	if (!pirq)
+		return;
+
+	if (dwapb_convert_irqs(pirq, pp)) {
+		dev_warn(gpio->dev, "no IRQ for port%d\n", pp->idx);
+		goto err_kfree_pirq;
+	}
+
+	girq = &gc->irq;
+	girq->handler = handle_bad_irq;
+	girq->default_type = IRQ_TYPE_NONE;
+
+	port->pirq = pirq;
+	pirq->irqchip.name = DWAPB_DRIVER_NAME;
+	pirq->irqchip.irq_ack = dwapb_irq_ack;
+	pirq->irqchip.irq_mask = dwapb_irq_mask;
+	pirq->irqchip.irq_unmask = dwapb_irq_unmask;
+	pirq->irqchip.irq_set_type = dwapb_irq_set_type;
+	pirq->irqchip.irq_enable = dwapb_irq_enable;
+	pirq->irqchip.irq_disable = dwapb_irq_disable;
+#ifdef CONFIG_PM_SLEEP
+	pirq->irqchip.irq_set_wake = dwapb_irq_set_wake;
+#endif
+
+	if (!pp->irq_shared) {
+		girq->num_parents = pirq->nr_irqs;
+		girq->parents = pirq->irq;
+		girq->parent_handler_data = gpio;
+		girq->parent_handler = dwapb_irq_handler;
+	} else {
+		/* This will let us handle the parent IRQ in the driver */
+		girq->num_parents = 0;
+		girq->parents = NULL;
+		girq->parent_handler = NULL;
+
+		/*
+		 * Request a shared IRQ since where MFD would have devices
+		 * using the same irq pin
+		 */
+		err = devm_request_irq(gpio->dev, pp->irq[0],
+				       dwapb_irq_handler_mfd,
+				       IRQF_SHARED, DWAPB_DRIVER_NAME, gpio);
+		if (err) {
+			dev_err(gpio->dev, "error requesting IRQ\n");
+			goto err_kfree_pirq;
+		}
+	}
+
+	girq->chip = &pirq->irqchip;
+
+	return;
+
+err_kfree_pirq:
+	devm_kfree(gpio->dev, pirq);
+}
+
+static int dwapb_gpio_add_port(struct dwapb_gpio *gpio,
+			       struct dwapb_port_property *pp,
+			       unsigned int offs)
+{
+	struct dwapb_gpio_port *port;
+	void __iomem *dat, *set, *dirout;
+	int err;
+
+	port = &gpio->ports[offs];
+	port->gpio = gpio;
+	port->idx = pp->idx;
+
+#ifdef CONFIG_PM_SLEEP
+	port->ctx = devm_kzalloc(gpio->dev, sizeof(*port->ctx), GFP_KERNEL);
+	if (!port->ctx)
+		return -ENOMEM;
+#endif
+
+	dat = gpio->regs + GPIO_EXT_PORTA + pp->idx * GPIO_EXT_PORT_STRIDE;
+	set = gpio->regs + GPIO_SWPORTA_DR + pp->idx * GPIO_SWPORT_DR_STRIDE;
+	dirout = gpio->regs + GPIO_SWPORTA_DDR + pp->idx * GPIO_SWPORT_DDR_STRIDE;
+
+	/* This registers 32 GPIO lines per port */
+	err = bgpio_init(&port->gc, gpio->dev, 4, dat, set, NULL, dirout,
+			 NULL, 0);
+	if (err) {
+		dev_err(gpio->dev, "failed to init gpio chip for port%d\n",
+			port->idx);
+		return err;
+	}
+
+#ifdef CONFIG_OF_GPIO
+	port->gc.of_node = to_of_node(pp->fwnode);
+#endif
+	port->gc.ngpio = pp->ngpio;
+	port->gc.base = pp->gpio_base;
+
+	/* Only port A support debounce */
+	if (pp->idx == 0)
+		port->gc.set_config = dwapb_gpio_set_config;
+
+	/* Only port A can provide interrupts in all configurations of the IP */
+	if (pp->idx == 0)
+		dwapb_configure_irqs(gpio, port, pp);
+
+	err = devm_gpiochip_add_data(gpio->dev, &port->gc, port);
+	if (err) {
+		dev_err(gpio->dev, "failed to register gpiochip for port%d\n",
+			port->idx);
+		return err;
+	}
+
+	return 0;
+}
+
+static void dwapb_get_irq(struct device *dev, struct fwnode_handle *fwnode,
+			  struct dwapb_port_property *pp)
+{
+	struct device_node *np = NULL;
+	int irq = -ENXIO, j;
+
+	if (fwnode_property_read_bool(fwnode, "interrupt-controller"))
+		np = to_of_node(fwnode);
+
+	for (j = 0; j < pp->ngpio; j++) {
+		if (np)
+			irq = of_irq_get(np, j);
+		else if (has_acpi_companion(dev))
+			irq = platform_get_irq_optional(to_platform_device(dev), j);
+		if (irq > 0)
+			pp->irq[j] = irq;
+	}
+}
+
+static struct dwapb_platform_data *dwapb_gpio_get_pdata(struct device *dev)
+{
+	struct fwnode_handle *fwnode;
+	struct dwapb_platform_data *pdata;
+	struct dwapb_port_property *pp;
+	int nports;
+	int i;
+
+	nports = device_get_child_node_count(dev);
+	if (nports == 0)
+		return ERR_PTR(-ENODEV);
+
+	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return ERR_PTR(-ENOMEM);
+
+	pdata->properties = devm_kcalloc(dev, nports, sizeof(*pp), GFP_KERNEL);
+	if (!pdata->properties)
+		return ERR_PTR(-ENOMEM);
+
+	pdata->nports = nports;
+
+	i = 0;
+	device_for_each_child_node(dev, fwnode)  {
+		pp = &pdata->properties[i++];
+		pp->fwnode = fwnode;
+
+		if (fwnode_property_read_u32(fwnode, "reg", &pp->idx) ||
+		    pp->idx >= DWAPB_MAX_PORTS) {
+			dev_err(dev,
+				"missing/invalid port index for port%d\n", i);
+			fwnode_handle_put(fwnode);
+			return ERR_PTR(-EINVAL);
+		}
+
+		if (fwnode_property_read_u32(fwnode, "ngpios", &pp->ngpio) &&
+		    fwnode_property_read_u32(fwnode, "snps,nr-gpios", &pp->ngpio)) {
+			dev_info(dev,
+				 "failed to get number of gpios for port%d\n",
+				 i);
+			pp->ngpio = DWAPB_MAX_GPIOS;
+		}
+
+		pp->irq_shared	= false;
+		pp->gpio_base	= -1;
+
+		/*
+		 * Only port A can provide interrupts in all configurations of
+		 * the IP.
+		 */
+		if (pp->idx == 0)
+			dwapb_get_irq(dev, fwnode, pp);
+	}
+
+	return pdata;
+}
+
+static void dwapb_assert_reset(void *data)
+{
+	struct dwapb_gpio *gpio = data;
+
+	reset_control_assert(gpio->rst);
+}
+
+static int dwapb_get_reset(struct dwapb_gpio *gpio)
+{
+	int err;
+
+	gpio->rst = devm_reset_control_get_optional_shared(gpio->dev, NULL);
+	if (IS_ERR(gpio->rst)) {
+		dev_err(gpio->dev, "Cannot get reset descriptor\n");
+		return PTR_ERR(gpio->rst);
+	}
+
+	err = reset_control_deassert(gpio->rst);
+	if (err) {
+		dev_err(gpio->dev, "Cannot deassert reset lane\n");
+		return err;
+	}
+
+	return devm_add_action_or_reset(gpio->dev, dwapb_assert_reset, gpio);
+}
+
+static void dwapb_disable_clks(void *data)
+{
+	struct dwapb_gpio *gpio = data;
+
+	clk_bulk_disable_unprepare(DWAPB_NR_CLOCKS, gpio->clks);
+}
+
+static int dwapb_get_clks(struct dwapb_gpio *gpio)
+{
+	int err;
+
+	/* Optional bus and debounce clocks */
+	gpio->clks[0].id = "bus";
+	gpio->clks[1].id = "db";
+	err = devm_clk_bulk_get_optional(gpio->dev, DWAPB_NR_CLOCKS,
+					 gpio->clks);
+	if (err)
+		return dev_err_probe(gpio->dev, err,
+				     "Cannot get APB/Debounce clocks\n");
+
+	err = clk_bulk_prepare_enable(DWAPB_NR_CLOCKS, gpio->clks);
+	if (err) {
+		dev_err(gpio->dev, "Cannot enable APB/Debounce clocks\n");
+		return err;
+	}
+
+	return devm_add_action_or_reset(gpio->dev, dwapb_disable_clks, gpio);
+}
+
+static const struct of_device_id dwapb_of_match[] = {
+	{ .compatible = "snps,dw-apb-gpio", .data = (void *)0},
+	{ .compatible = "apm,xgene-gpio-v2", .data = (void *)GPIO_REG_OFFSET_V2},
+	{ /* Sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, dwapb_of_match);
+
+static const struct acpi_device_id dwapb_acpi_match[] = {
+	{"HISI0181", 0},
+	{"APMC0D07", 0},
+	{"APMC0D81", GPIO_REG_OFFSET_V2},
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, dwapb_acpi_match);
+
+static int dwapb_gpio_probe(struct platform_device *pdev)
+{
+	unsigned int i;
+	struct dwapb_gpio *gpio;
+	int err;
+	struct device *dev = &pdev->dev;
+	struct dwapb_platform_data *pdata = dev_get_platdata(dev);
+
+	if (!pdata) {
+		pdata = dwapb_gpio_get_pdata(dev);
+		if (IS_ERR(pdata))
+			return PTR_ERR(pdata);
+	}
+
+	if (!pdata->nports)
+		return -ENODEV;
+
+	gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
+	if (!gpio)
+		return -ENOMEM;
+
+	gpio->dev = &pdev->dev;
+	gpio->nr_ports = pdata->nports;
+
+	err = dwapb_get_reset(gpio);
+	if (err)
+		return err;
+
+	gpio->ports = devm_kcalloc(&pdev->dev, gpio->nr_ports,
+				   sizeof(*gpio->ports), GFP_KERNEL);
+	if (!gpio->ports)
+		return -ENOMEM;
+
+	gpio->regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(gpio->regs))
+		return PTR_ERR(gpio->regs);
+
+	err = dwapb_get_clks(gpio);
+	if (err)
+		return err;
+
+	gpio->flags = (uintptr_t)device_get_match_data(dev);
+
+	for (i = 0; i < gpio->nr_ports; i++) {
+		err = dwapb_gpio_add_port(gpio, &pdata->properties[i], i);
+		if (err)
+			return err;
+	}
+
+	platform_set_drvdata(pdev, gpio);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int dwapb_gpio_suspend(struct device *dev)
+{
+	struct dwapb_gpio *gpio = dev_get_drvdata(dev);
+	struct gpio_chip *gc	= &gpio->ports[0].gc;
+	unsigned long flags;
+	int i;
+
+	spin_lock_irqsave(&gc->bgpio_lock, flags);
+	for (i = 0; i < gpio->nr_ports; i++) {
+		unsigned int offset;
+		unsigned int idx = gpio->ports[i].idx;
+		struct dwapb_context *ctx = gpio->ports[i].ctx;
+
+		offset = GPIO_SWPORTA_DDR + idx * GPIO_SWPORT_DDR_STRIDE;
+		ctx->dir = dwapb_read(gpio, offset);
+
+		offset = GPIO_SWPORTA_DR + idx * GPIO_SWPORT_DR_STRIDE;
+		ctx->data = dwapb_read(gpio, offset);
+
+		offset = GPIO_EXT_PORTA + idx * GPIO_EXT_PORT_STRIDE;
+		ctx->ext = dwapb_read(gpio, offset);
+
+		/* Only port A can provide interrupts */
+		if (idx == 0) {
+			ctx->int_mask	= dwapb_read(gpio, GPIO_INTMASK);
+			ctx->int_en	= dwapb_read(gpio, GPIO_INTEN);
+			ctx->int_pol	= dwapb_read(gpio, GPIO_INT_POLARITY);
+			ctx->int_type	= dwapb_read(gpio, GPIO_INTTYPE_LEVEL);
+			ctx->int_deb	= dwapb_read(gpio, GPIO_PORTA_DEBOUNCE);
+
+			/* Mask out interrupts */
+			dwapb_write(gpio, GPIO_INTMASK, ~ctx->wake_en);
+		}
+	}
+	spin_unlock_irqrestore(&gc->bgpio_lock, flags);
+
+	clk_bulk_disable_unprepare(DWAPB_NR_CLOCKS, gpio->clks);
+
+	return 0;
+}
+
+static int dwapb_gpio_resume(struct device *dev)
+{
+	struct dwapb_gpio *gpio = dev_get_drvdata(dev);
+	struct gpio_chip *gc	= &gpio->ports[0].gc;
+	unsigned long flags;
+	int i, err;
+
+	err = clk_bulk_prepare_enable(DWAPB_NR_CLOCKS, gpio->clks);
+	if (err) {
+		dev_err(gpio->dev, "Cannot reenable APB/Debounce clocks\n");
+		return err;
+	}
+
+	spin_lock_irqsave(&gc->bgpio_lock, flags);
+	for (i = 0; i < gpio->nr_ports; i++) {
+		unsigned int offset;
+		unsigned int idx = gpio->ports[i].idx;
+		struct dwapb_context *ctx = gpio->ports[i].ctx;
+
+		offset = GPIO_SWPORTA_DR + idx * GPIO_SWPORT_DR_STRIDE;
+		dwapb_write(gpio, offset, ctx->data);
+
+		offset = GPIO_SWPORTA_DDR + idx * GPIO_SWPORT_DDR_STRIDE;
+		dwapb_write(gpio, offset, ctx->dir);
+
+		offset = GPIO_EXT_PORTA + idx * GPIO_EXT_PORT_STRIDE;
+		dwapb_write(gpio, offset, ctx->ext);
+
+		/* Only port A can provide interrupts */
+		if (idx == 0) {
+			dwapb_write(gpio, GPIO_INTTYPE_LEVEL, ctx->int_type);
+			dwapb_write(gpio, GPIO_INT_POLARITY, ctx->int_pol);
+			dwapb_write(gpio, GPIO_PORTA_DEBOUNCE, ctx->int_deb);
+			dwapb_write(gpio, GPIO_INTEN, ctx->int_en);
+			dwapb_write(gpio, GPIO_INTMASK, ctx->int_mask);
+
+			/* Clear out spurious interrupts */
+			dwapb_write(gpio, GPIO_PORTA_EOI, 0xffffffff);
+		}
+	}
+	spin_unlock_irqrestore(&gc->bgpio_lock, flags);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(dwapb_gpio_pm_ops, dwapb_gpio_suspend,
+			 dwapb_gpio_resume);
+
+static struct platform_driver dwapb_gpio_driver = {
+	.driver		= {
+		.name	= DWAPB_DRIVER_NAME,
+		.pm	= &dwapb_gpio_pm_ops,
+		.of_match_table = dwapb_of_match,
+		.acpi_match_table = dwapb_acpi_match,
+	},
+	.probe		= dwapb_gpio_probe,
+};
+
+module_platform_driver(dwapb_gpio_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jamie Iles");
+MODULE_DESCRIPTION("Synopsys DesignWare APB GPIO driver");
+MODULE_ALIAS("platform:" DWAPB_DRIVER_NAME);
diff --git a/drivers/gpio/gpio-eic-sprd.c b/drivers/gpio/gpio-eic-sprd.c
new file mode 100644
index 000000000..865ab2b34
--- /dev/null
+++ b/drivers/gpio/gpio-eic-sprd.c
@@ -0,0 +1,690 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Spreadtrum Communications Inc.
+ * Copyright (C) 2018 Linaro Ltd.
+ */
+
+#include <linux/bitops.h>
+#include <linux/gpio/driver.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+
+/* EIC registers definition */
+#define SPRD_EIC_DBNC_DATA		0x0
+#define SPRD_EIC_DBNC_DMSK		0x4
+#define SPRD_EIC_DBNC_IEV		0x14
+#define SPRD_EIC_DBNC_IE		0x18
+#define SPRD_EIC_DBNC_RIS		0x1c
+#define SPRD_EIC_DBNC_MIS		0x20
+#define SPRD_EIC_DBNC_IC		0x24
+#define SPRD_EIC_DBNC_TRIG		0x28
+#define SPRD_EIC_DBNC_CTRL0		0x40
+
+#define SPRD_EIC_LATCH_INTEN		0x0
+#define SPRD_EIC_LATCH_INTRAW		0x4
+#define SPRD_EIC_LATCH_INTMSK		0x8
+#define SPRD_EIC_LATCH_INTCLR		0xc
+#define SPRD_EIC_LATCH_INTPOL		0x10
+#define SPRD_EIC_LATCH_INTMODE		0x14
+
+#define SPRD_EIC_ASYNC_INTIE		0x0
+#define SPRD_EIC_ASYNC_INTRAW		0x4
+#define SPRD_EIC_ASYNC_INTMSK		0x8
+#define SPRD_EIC_ASYNC_INTCLR		0xc
+#define SPRD_EIC_ASYNC_INTMODE		0x10
+#define SPRD_EIC_ASYNC_INTBOTH		0x14
+#define SPRD_EIC_ASYNC_INTPOL		0x18
+#define SPRD_EIC_ASYNC_DATA		0x1c
+
+#define SPRD_EIC_SYNC_INTIE		0x0
+#define SPRD_EIC_SYNC_INTRAW		0x4
+#define SPRD_EIC_SYNC_INTMSK		0x8
+#define SPRD_EIC_SYNC_INTCLR		0xc
+#define SPRD_EIC_SYNC_INTMODE		0x10
+#define SPRD_EIC_SYNC_INTBOTH		0x14
+#define SPRD_EIC_SYNC_INTPOL		0x18
+#define SPRD_EIC_SYNC_DATA		0x1c
+
+/*
+ * The digital-chip EIC controller can support maximum 3 banks, and each bank
+ * contains 8 EICs.
+ */
+#define SPRD_EIC_MAX_BANK		3
+#define SPRD_EIC_PER_BANK_NR		8
+#define SPRD_EIC_DATA_MASK		GENMASK(7, 0)
+#define SPRD_EIC_BIT(x)			((x) & (SPRD_EIC_PER_BANK_NR - 1))
+#define SPRD_EIC_DBNC_MASK		GENMASK(11, 0)
+
+/*
+ * The Spreadtrum EIC (external interrupt controller) can be used only in
+ * input mode to generate interrupts if detecting input signals.
+ *
+ * The Spreadtrum digital-chip EIC controller contains 4 sub-modules:
+ * debounce EIC, latch EIC, async EIC and sync EIC,
+ *
+ * The debounce EIC is used to capture the input signals' stable status
+ * (millisecond resolution) and a single-trigger mechanism is introduced
+ * into this sub-module to enhance the input event detection reliability.
+ * The debounce range is from 1ms to 4s with a step size of 1ms.
+ *
+ * The latch EIC is used to latch some special power down signals and
+ * generate interrupts, since the latch EIC does not depend on the APB clock
+ * to capture signals.
+ *
+ * The async EIC uses a 32k clock to capture the short signals (microsecond
+ * resolution) to generate interrupts by level or edge trigger.
+ *
+ * The EIC-sync is similar with GPIO's input function, which is a synchronized
+ * signal input register.
+ */
+enum sprd_eic_type {
+	SPRD_EIC_DEBOUNCE,
+	SPRD_EIC_LATCH,
+	SPRD_EIC_ASYNC,
+	SPRD_EIC_SYNC,
+	SPRD_EIC_MAX,
+};
+
+struct sprd_eic {
+	struct gpio_chip chip;
+	struct irq_chip intc;
+	void __iomem *base[SPRD_EIC_MAX_BANK];
+	enum sprd_eic_type type;
+	spinlock_t lock;
+	int irq;
+};
+
+struct sprd_eic_variant_data {
+	enum sprd_eic_type type;
+	u32 num_eics;
+};
+
+static const char *sprd_eic_label_name[SPRD_EIC_MAX] = {
+	"eic-debounce", "eic-latch", "eic-async",
+	"eic-sync",
+};
+
+static const struct sprd_eic_variant_data sc9860_eic_dbnc_data = {
+	.type = SPRD_EIC_DEBOUNCE,
+	.num_eics = 8,
+};
+
+static const struct sprd_eic_variant_data sc9860_eic_latch_data = {
+	.type = SPRD_EIC_LATCH,
+	.num_eics = 8,
+};
+
+static const struct sprd_eic_variant_data sc9860_eic_async_data = {
+	.type = SPRD_EIC_ASYNC,
+	.num_eics = 8,
+};
+
+static const struct sprd_eic_variant_data sc9860_eic_sync_data = {
+	.type = SPRD_EIC_SYNC,
+	.num_eics = 8,
+};
+
+static inline void __iomem *sprd_eic_offset_base(struct sprd_eic *sprd_eic,
+						 unsigned int bank)
+{
+	if (bank >= SPRD_EIC_MAX_BANK)
+		return NULL;
+
+	return sprd_eic->base[bank];
+}
+
+static void sprd_eic_update(struct gpio_chip *chip, unsigned int offset,
+			    u16 reg, unsigned int val)
+{
+	struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
+	void __iomem *base =
+		sprd_eic_offset_base(sprd_eic, offset / SPRD_EIC_PER_BANK_NR);
+	unsigned long flags;
+	u32 tmp;
+
+	spin_lock_irqsave(&sprd_eic->lock, flags);
+	tmp = readl_relaxed(base + reg);
+
+	if (val)
+		tmp |= BIT(SPRD_EIC_BIT(offset));
+	else
+		tmp &= ~BIT(SPRD_EIC_BIT(offset));
+
+	writel_relaxed(tmp, base + reg);
+	spin_unlock_irqrestore(&sprd_eic->lock, flags);
+}
+
+static int sprd_eic_read(struct gpio_chip *chip, unsigned int offset, u16 reg)
+{
+	struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
+	void __iomem *base =
+		sprd_eic_offset_base(sprd_eic, offset / SPRD_EIC_PER_BANK_NR);
+
+	return !!(readl_relaxed(base + reg) & BIT(SPRD_EIC_BIT(offset)));
+}
+
+static int sprd_eic_request(struct gpio_chip *chip, unsigned int offset)
+{
+	sprd_eic_update(chip, offset, SPRD_EIC_DBNC_DMSK, 1);
+	return 0;
+}
+
+static void sprd_eic_free(struct gpio_chip *chip, unsigned int offset)
+{
+	sprd_eic_update(chip, offset, SPRD_EIC_DBNC_DMSK, 0);
+}
+
+static int sprd_eic_get(struct gpio_chip *chip, unsigned int offset)
+{
+	struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
+
+	switch (sprd_eic->type) {
+	case SPRD_EIC_DEBOUNCE:
+		return sprd_eic_read(chip, offset, SPRD_EIC_DBNC_DATA);
+	case SPRD_EIC_ASYNC:
+		return sprd_eic_read(chip, offset, SPRD_EIC_ASYNC_DATA);
+	case SPRD_EIC_SYNC:
+		return sprd_eic_read(chip, offset, SPRD_EIC_SYNC_DATA);
+	default:
+		return -ENOTSUPP;
+	}
+}
+
+static int sprd_eic_direction_input(struct gpio_chip *chip, unsigned int offset)
+{
+	/* EICs are always input, nothing need to do here. */
+	return 0;
+}
+
+static void sprd_eic_set(struct gpio_chip *chip, unsigned int offset, int value)
+{
+	/* EICs are always input, nothing need to do here. */
+}
+
+static int sprd_eic_set_debounce(struct gpio_chip *chip, unsigned int offset,
+				 unsigned int debounce)
+{
+	struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
+	void __iomem *base =
+		sprd_eic_offset_base(sprd_eic, offset / SPRD_EIC_PER_BANK_NR);
+	u32 reg = SPRD_EIC_DBNC_CTRL0 + SPRD_EIC_BIT(offset) * 0x4;
+	u32 value = readl_relaxed(base + reg) & ~SPRD_EIC_DBNC_MASK;
+
+	value |= (debounce / 1000) & SPRD_EIC_DBNC_MASK;
+	writel_relaxed(value, base + reg);
+
+	return 0;
+}
+
+static int sprd_eic_set_config(struct gpio_chip *chip, unsigned int offset,
+			       unsigned long config)
+{
+	unsigned long param = pinconf_to_config_param(config);
+	u32 arg = pinconf_to_config_argument(config);
+
+	if (param == PIN_CONFIG_INPUT_DEBOUNCE)
+		return sprd_eic_set_debounce(chip, offset, arg);
+
+	return -ENOTSUPP;
+}
+
+static void sprd_eic_irq_mask(struct irq_data *data)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+	struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
+	u32 offset = irqd_to_hwirq(data);
+
+	switch (sprd_eic->type) {
+	case SPRD_EIC_DEBOUNCE:
+		sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IE, 0);
+		sprd_eic_update(chip, offset, SPRD_EIC_DBNC_TRIG, 0);
+		break;
+	case SPRD_EIC_LATCH:
+		sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTEN, 0);
+		break;
+	case SPRD_EIC_ASYNC:
+		sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTIE, 0);
+		break;
+	case SPRD_EIC_SYNC:
+		sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTIE, 0);
+		break;
+	default:
+		dev_err(chip->parent, "Unsupported EIC type.\n");
+	}
+}
+
+static void sprd_eic_irq_unmask(struct irq_data *data)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+	struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
+	u32 offset = irqd_to_hwirq(data);
+
+	switch (sprd_eic->type) {
+	case SPRD_EIC_DEBOUNCE:
+		sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IE, 1);
+		sprd_eic_update(chip, offset, SPRD_EIC_DBNC_TRIG, 1);
+		break;
+	case SPRD_EIC_LATCH:
+		sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTEN, 1);
+		break;
+	case SPRD_EIC_ASYNC:
+		sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTIE, 1);
+		break;
+	case SPRD_EIC_SYNC:
+		sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTIE, 1);
+		break;
+	default:
+		dev_err(chip->parent, "Unsupported EIC type.\n");
+	}
+}
+
+static void sprd_eic_irq_ack(struct irq_data *data)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+	struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
+	u32 offset = irqd_to_hwirq(data);
+
+	switch (sprd_eic->type) {
+	case SPRD_EIC_DEBOUNCE:
+		sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IC, 1);
+		break;
+	case SPRD_EIC_LATCH:
+		sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTCLR, 1);
+		break;
+	case SPRD_EIC_ASYNC:
+		sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTCLR, 1);
+		break;
+	case SPRD_EIC_SYNC:
+		sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTCLR, 1);
+		break;
+	default:
+		dev_err(chip->parent, "Unsupported EIC type.\n");
+	}
+}
+
+static int sprd_eic_irq_set_type(struct irq_data *data, unsigned int flow_type)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+	struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
+	u32 offset = irqd_to_hwirq(data);
+	int state;
+
+	switch (sprd_eic->type) {
+	case SPRD_EIC_DEBOUNCE:
+		switch (flow_type) {
+		case IRQ_TYPE_LEVEL_HIGH:
+			sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IEV, 1);
+			break;
+		case IRQ_TYPE_LEVEL_LOW:
+			sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IEV, 0);
+			break;
+		case IRQ_TYPE_EDGE_RISING:
+		case IRQ_TYPE_EDGE_FALLING:
+		case IRQ_TYPE_EDGE_BOTH:
+			state = sprd_eic_get(chip, offset);
+			if (state)
+				sprd_eic_update(chip, offset,
+						SPRD_EIC_DBNC_IEV, 0);
+			else
+				sprd_eic_update(chip, offset,
+						SPRD_EIC_DBNC_IEV, 1);
+			break;
+		default:
+			return -ENOTSUPP;
+		}
+
+		irq_set_handler_locked(data, handle_level_irq);
+		break;
+	case SPRD_EIC_LATCH:
+		switch (flow_type) {
+		case IRQ_TYPE_LEVEL_HIGH:
+			sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTPOL, 0);
+			break;
+		case IRQ_TYPE_LEVEL_LOW:
+			sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTPOL, 1);
+			break;
+		case IRQ_TYPE_EDGE_RISING:
+		case IRQ_TYPE_EDGE_FALLING:
+		case IRQ_TYPE_EDGE_BOTH:
+			state = sprd_eic_get(chip, offset);
+			if (state)
+				sprd_eic_update(chip, offset,
+						SPRD_EIC_LATCH_INTPOL, 0);
+			else
+				sprd_eic_update(chip, offset,
+						SPRD_EIC_LATCH_INTPOL, 1);
+			break;
+		default:
+			return -ENOTSUPP;
+		}
+
+		irq_set_handler_locked(data, handle_level_irq);
+		break;
+	case SPRD_EIC_ASYNC:
+		switch (flow_type) {
+		case IRQ_TYPE_EDGE_RISING:
+			sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0);
+			sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 0);
+			sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 1);
+			irq_set_handler_locked(data, handle_edge_irq);
+			break;
+		case IRQ_TYPE_EDGE_FALLING:
+			sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0);
+			sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 0);
+			sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 0);
+			irq_set_handler_locked(data, handle_edge_irq);
+			break;
+		case IRQ_TYPE_EDGE_BOTH:
+			sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 0);
+			sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 1);
+			irq_set_handler_locked(data, handle_edge_irq);
+			break;
+		case IRQ_TYPE_LEVEL_HIGH:
+			sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0);
+			sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 1);
+			sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 1);
+			irq_set_handler_locked(data, handle_level_irq);
+			break;
+		case IRQ_TYPE_LEVEL_LOW:
+			sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0);
+			sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 1);
+			sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 0);
+			irq_set_handler_locked(data, handle_level_irq);
+			break;
+		default:
+			return -ENOTSUPP;
+		}
+		break;
+	case SPRD_EIC_SYNC:
+		switch (flow_type) {
+		case IRQ_TYPE_EDGE_RISING:
+			sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0);
+			sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 0);
+			sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 1);
+			irq_set_handler_locked(data, handle_edge_irq);
+			break;
+		case IRQ_TYPE_EDGE_FALLING:
+			sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0);
+			sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 0);
+			sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 0);
+			irq_set_handler_locked(data, handle_edge_irq);
+			break;
+		case IRQ_TYPE_EDGE_BOTH:
+			sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 0);
+			sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 1);
+			irq_set_handler_locked(data, handle_edge_irq);
+			break;
+		case IRQ_TYPE_LEVEL_HIGH:
+			sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0);
+			sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 1);
+			sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 1);
+			irq_set_handler_locked(data, handle_level_irq);
+			break;
+		case IRQ_TYPE_LEVEL_LOW:
+			sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0);
+			sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 1);
+			sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 0);
+			irq_set_handler_locked(data, handle_level_irq);
+			break;
+		default:
+			return -ENOTSUPP;
+		}
+		break;
+	default:
+		dev_err(chip->parent, "Unsupported EIC type.\n");
+		return -ENOTSUPP;
+	}
+
+	return 0;
+}
+
+static void sprd_eic_toggle_trigger(struct gpio_chip *chip, unsigned int irq,
+				    unsigned int offset)
+{
+	struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
+	struct irq_data *data = irq_get_irq_data(irq);
+	u32 trigger = irqd_get_trigger_type(data);
+	int state, post_state;
+
+	/*
+	 * The debounce EIC and latch EIC can only support level trigger, so we
+	 * can toggle the level trigger to emulate the edge trigger.
+	 */
+	if ((sprd_eic->type != SPRD_EIC_DEBOUNCE &&
+	     sprd_eic->type != SPRD_EIC_LATCH) ||
+	    !(trigger & IRQ_TYPE_EDGE_BOTH))
+		return;
+
+	sprd_eic_irq_mask(data);
+	state = sprd_eic_get(chip, offset);
+
+retry:
+	switch (sprd_eic->type) {
+	case SPRD_EIC_DEBOUNCE:
+		if (state)
+			sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IEV, 0);
+		else
+			sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IEV, 1);
+		break;
+	case SPRD_EIC_LATCH:
+		if (state)
+			sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTPOL, 0);
+		else
+			sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTPOL, 1);
+		break;
+	default:
+		sprd_eic_irq_unmask(data);
+		return;
+	}
+
+	post_state = sprd_eic_get(chip, offset);
+	if (state != post_state) {
+		dev_warn(chip->parent, "EIC level was changed.\n");
+		state = post_state;
+		goto retry;
+	}
+
+	sprd_eic_irq_unmask(data);
+}
+
+static int sprd_eic_match_chip_by_type(struct gpio_chip *chip, void *data)
+{
+	enum sprd_eic_type type = *(enum sprd_eic_type *)data;
+
+	return !strcmp(chip->label, sprd_eic_label_name[type]);
+}
+
+static void sprd_eic_handle_one_type(struct gpio_chip *chip)
+{
+	struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
+	u32 bank, n, girq;
+
+	for (bank = 0; bank * SPRD_EIC_PER_BANK_NR < chip->ngpio; bank++) {
+		void __iomem *base = sprd_eic_offset_base(sprd_eic, bank);
+		unsigned long reg;
+
+		switch (sprd_eic->type) {
+		case SPRD_EIC_DEBOUNCE:
+			reg = readl_relaxed(base + SPRD_EIC_DBNC_MIS) &
+				SPRD_EIC_DATA_MASK;
+			break;
+		case SPRD_EIC_LATCH:
+			reg = readl_relaxed(base + SPRD_EIC_LATCH_INTMSK) &
+				SPRD_EIC_DATA_MASK;
+			break;
+		case SPRD_EIC_ASYNC:
+			reg = readl_relaxed(base + SPRD_EIC_ASYNC_INTMSK) &
+				SPRD_EIC_DATA_MASK;
+			break;
+		case SPRD_EIC_SYNC:
+			reg = readl_relaxed(base + SPRD_EIC_SYNC_INTMSK) &
+				SPRD_EIC_DATA_MASK;
+			break;
+		default:
+			dev_err(chip->parent, "Unsupported EIC type.\n");
+			return;
+		}
+
+		for_each_set_bit(n, &reg, SPRD_EIC_PER_BANK_NR) {
+			u32 offset = bank * SPRD_EIC_PER_BANK_NR + n;
+
+			girq = irq_find_mapping(chip->irq.domain, offset);
+
+			generic_handle_irq(girq);
+			sprd_eic_toggle_trigger(chip, girq, offset);
+		}
+	}
+}
+
+static void sprd_eic_irq_handler(struct irq_desc *desc)
+{
+	struct irq_chip *ic = irq_desc_get_chip(desc);
+	struct gpio_chip *chip;
+	enum sprd_eic_type type;
+
+	chained_irq_enter(ic, desc);
+
+	/*
+	 * Since the digital-chip EIC 4 sub-modules (debounce, latch, async
+	 * and sync) share one same interrupt line, we should iterate each
+	 * EIC module to check if there are EIC interrupts were triggered.
+	 */
+	for (type = SPRD_EIC_DEBOUNCE; type < SPRD_EIC_MAX; type++) {
+		chip = gpiochip_find(&type, sprd_eic_match_chip_by_type);
+		if (!chip)
+			continue;
+
+		sprd_eic_handle_one_type(chip);
+	}
+
+	chained_irq_exit(ic, desc);
+}
+
+static int sprd_eic_probe(struct platform_device *pdev)
+{
+	const struct sprd_eic_variant_data *pdata;
+	struct gpio_irq_chip *irq;
+	struct sprd_eic *sprd_eic;
+	struct resource *res;
+	int ret, i;
+
+	pdata = of_device_get_match_data(&pdev->dev);
+	if (!pdata) {
+		dev_err(&pdev->dev, "No matching driver data found.\n");
+		return -EINVAL;
+	}
+
+	sprd_eic = devm_kzalloc(&pdev->dev, sizeof(*sprd_eic), GFP_KERNEL);
+	if (!sprd_eic)
+		return -ENOMEM;
+
+	spin_lock_init(&sprd_eic->lock);
+	sprd_eic->type = pdata->type;
+
+	sprd_eic->irq = platform_get_irq(pdev, 0);
+	if (sprd_eic->irq < 0)
+		return sprd_eic->irq;
+
+	for (i = 0; i < SPRD_EIC_MAX_BANK; i++) {
+		/*
+		 * We can have maximum 3 banks EICs, and each EIC has
+		 * its own base address. But some platform maybe only
+		 * have one bank EIC, thus base[1] and base[2] can be
+		 * optional.
+		 */
+		res = platform_get_resource(pdev, IORESOURCE_MEM, i);
+		if (!res)
+			break;
+
+		sprd_eic->base[i] = devm_ioremap_resource(&pdev->dev, res);
+		if (IS_ERR(sprd_eic->base[i]))
+			return PTR_ERR(sprd_eic->base[i]);
+	}
+
+	sprd_eic->chip.label = sprd_eic_label_name[sprd_eic->type];
+	sprd_eic->chip.ngpio = pdata->num_eics;
+	sprd_eic->chip.base = -1;
+	sprd_eic->chip.parent = &pdev->dev;
+	sprd_eic->chip.of_node = pdev->dev.of_node;
+	sprd_eic->chip.direction_input = sprd_eic_direction_input;
+	switch (sprd_eic->type) {
+	case SPRD_EIC_DEBOUNCE:
+		sprd_eic->chip.request = sprd_eic_request;
+		sprd_eic->chip.free = sprd_eic_free;
+		sprd_eic->chip.set_config = sprd_eic_set_config;
+		sprd_eic->chip.set = sprd_eic_set;
+		fallthrough;
+	case SPRD_EIC_ASYNC:
+	case SPRD_EIC_SYNC:
+		sprd_eic->chip.get = sprd_eic_get;
+		break;
+	case SPRD_EIC_LATCH:
+	default:
+		break;
+	}
+
+	sprd_eic->intc.name = dev_name(&pdev->dev);
+	sprd_eic->intc.irq_ack = sprd_eic_irq_ack;
+	sprd_eic->intc.irq_mask = sprd_eic_irq_mask;
+	sprd_eic->intc.irq_unmask = sprd_eic_irq_unmask;
+	sprd_eic->intc.irq_set_type = sprd_eic_irq_set_type;
+	sprd_eic->intc.flags = IRQCHIP_SKIP_SET_WAKE;
+
+	irq = &sprd_eic->chip.irq;
+	irq->chip = &sprd_eic->intc;
+	irq->handler = handle_bad_irq;
+	irq->default_type = IRQ_TYPE_NONE;
+	irq->parent_handler = sprd_eic_irq_handler;
+	irq->parent_handler_data = sprd_eic;
+	irq->num_parents = 1;
+	irq->parents = &sprd_eic->irq;
+
+	ret = devm_gpiochip_add_data(&pdev->dev, &sprd_eic->chip, sprd_eic);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Could not register gpiochip %d.\n", ret);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, sprd_eic);
+	return 0;
+}
+
+static const struct of_device_id sprd_eic_of_match[] = {
+	{
+		.compatible = "sprd,sc9860-eic-debounce",
+		.data = &sc9860_eic_dbnc_data,
+	},
+	{
+		.compatible = "sprd,sc9860-eic-latch",
+		.data = &sc9860_eic_latch_data,
+	},
+	{
+		.compatible = "sprd,sc9860-eic-async",
+		.data = &sc9860_eic_async_data,
+	},
+	{
+		.compatible = "sprd,sc9860-eic-sync",
+		.data = &sc9860_eic_sync_data,
+	},
+	{
+		/* end of list */
+	}
+};
+MODULE_DEVICE_TABLE(of, sprd_eic_of_match);
+
+static struct platform_driver sprd_eic_driver = {
+	.probe = sprd_eic_probe,
+	.driver = {
+		.name = "sprd-eic",
+		.of_match_table	= sprd_eic_of_match,
+	},
+};
+
+module_platform_driver(sprd_eic_driver);
+
+MODULE_DESCRIPTION("Spreadtrum EIC driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-em.c b/drivers/gpio/gpio-em.c
new file mode 100644
index 000000000..17a243c52
--- /dev/null
+++ b/drivers/gpio/gpio-em.c
@@ -0,0 +1,391 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Emma Mobile GPIO Support - GIO
+ *
+ *  Copyright (C) 2012 Magnus Damm
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/bitops.h>
+#include <linux/err.h>
+#include <linux/gpio/driver.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/pinctrl/consumer.h>
+
+struct em_gio_priv {
+	void __iomem *base0;
+	void __iomem *base1;
+	spinlock_t sense_lock;
+	struct platform_device *pdev;
+	struct gpio_chip gpio_chip;
+	struct irq_chip irq_chip;
+	struct irq_domain *irq_domain;
+};
+
+#define GIO_E1 0x00
+#define GIO_E0 0x04
+#define GIO_EM 0x04
+#define GIO_OL 0x08
+#define GIO_OH 0x0c
+#define GIO_I 0x10
+#define GIO_IIA 0x14
+#define GIO_IEN 0x18
+#define GIO_IDS 0x1c
+#define GIO_IIM 0x1c
+#define GIO_RAW 0x20
+#define GIO_MST 0x24
+#define GIO_IIR 0x28
+
+#define GIO_IDT0 0x40
+#define GIO_IDT1 0x44
+#define GIO_IDT2 0x48
+#define GIO_IDT3 0x4c
+#define GIO_RAWBL 0x50
+#define GIO_RAWBH 0x54
+#define GIO_IRBL 0x58
+#define GIO_IRBH 0x5c
+
+#define GIO_IDT(n) (GIO_IDT0 + ((n) * 4))
+
+static inline unsigned long em_gio_read(struct em_gio_priv *p, int offs)
+{
+	if (offs < GIO_IDT0)
+		return ioread32(p->base0 + offs);
+	else
+		return ioread32(p->base1 + (offs - GIO_IDT0));
+}
+
+static inline void em_gio_write(struct em_gio_priv *p, int offs,
+				unsigned long value)
+{
+	if (offs < GIO_IDT0)
+		iowrite32(value, p->base0 + offs);
+	else
+		iowrite32(value, p->base1 + (offs - GIO_IDT0));
+}
+
+static void em_gio_irq_disable(struct irq_data *d)
+{
+	struct em_gio_priv *p = irq_data_get_irq_chip_data(d);
+
+	em_gio_write(p, GIO_IDS, BIT(irqd_to_hwirq(d)));
+}
+
+static void em_gio_irq_enable(struct irq_data *d)
+{
+	struct em_gio_priv *p = irq_data_get_irq_chip_data(d);
+
+	em_gio_write(p, GIO_IEN, BIT(irqd_to_hwirq(d)));
+}
+
+static int em_gio_irq_reqres(struct irq_data *d)
+{
+	struct em_gio_priv *p = irq_data_get_irq_chip_data(d);
+	int ret;
+
+	ret = gpiochip_lock_as_irq(&p->gpio_chip, irqd_to_hwirq(d));
+	if (ret) {
+		dev_err(p->gpio_chip.parent,
+			"unable to lock HW IRQ %lu for IRQ\n",
+			irqd_to_hwirq(d));
+		return ret;
+	}
+	return 0;
+}
+
+static void em_gio_irq_relres(struct irq_data *d)
+{
+	struct em_gio_priv *p = irq_data_get_irq_chip_data(d);
+
+	gpiochip_unlock_as_irq(&p->gpio_chip, irqd_to_hwirq(d));
+}
+
+
+#define GIO_ASYNC(x) (x + 8)
+
+static unsigned char em_gio_sense_table[IRQ_TYPE_SENSE_MASK + 1] = {
+	[IRQ_TYPE_EDGE_RISING] = GIO_ASYNC(0x00),
+	[IRQ_TYPE_EDGE_FALLING] = GIO_ASYNC(0x01),
+	[IRQ_TYPE_LEVEL_HIGH] = GIO_ASYNC(0x02),
+	[IRQ_TYPE_LEVEL_LOW] = GIO_ASYNC(0x03),
+	[IRQ_TYPE_EDGE_BOTH] = GIO_ASYNC(0x04),
+};
+
+static int em_gio_irq_set_type(struct irq_data *d, unsigned int type)
+{
+	unsigned char value = em_gio_sense_table[type & IRQ_TYPE_SENSE_MASK];
+	struct em_gio_priv *p = irq_data_get_irq_chip_data(d);
+	unsigned int reg, offset, shift;
+	unsigned long flags;
+	unsigned long tmp;
+
+	if (!value)
+		return -EINVAL;
+
+	offset = irqd_to_hwirq(d);
+
+	pr_debug("gio: sense irq = %d, mode = %d\n", offset, value);
+
+	/* 8 x 4 bit fields in 4 IDT registers */
+	reg = GIO_IDT(offset >> 3);
+	shift = (offset & 0x07) << 4;
+
+	spin_lock_irqsave(&p->sense_lock, flags);
+
+	/* disable the interrupt in IIA */
+	tmp = em_gio_read(p, GIO_IIA);
+	tmp &= ~BIT(offset);
+	em_gio_write(p, GIO_IIA, tmp);
+
+	/* change the sense setting in IDT */
+	tmp = em_gio_read(p, reg);
+	tmp &= ~(0xf << shift);
+	tmp |= value << shift;
+	em_gio_write(p, reg, tmp);
+
+	/* clear pending interrupts */
+	em_gio_write(p, GIO_IIR, BIT(offset));
+
+	/* enable the interrupt in IIA */
+	tmp = em_gio_read(p, GIO_IIA);
+	tmp |= BIT(offset);
+	em_gio_write(p, GIO_IIA, tmp);
+
+	spin_unlock_irqrestore(&p->sense_lock, flags);
+
+	return 0;
+}
+
+static irqreturn_t em_gio_irq_handler(int irq, void *dev_id)
+{
+	struct em_gio_priv *p = dev_id;
+	unsigned long pending;
+	unsigned int offset, irqs_handled = 0;
+
+	while ((pending = em_gio_read(p, GIO_MST))) {
+		offset = __ffs(pending);
+		em_gio_write(p, GIO_IIR, BIT(offset));
+		generic_handle_irq(irq_find_mapping(p->irq_domain, offset));
+		irqs_handled++;
+	}
+
+	return irqs_handled ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static inline struct em_gio_priv *gpio_to_priv(struct gpio_chip *chip)
+{
+	return gpiochip_get_data(chip);
+}
+
+static int em_gio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	em_gio_write(gpio_to_priv(chip), GIO_E0, BIT(offset));
+	return 0;
+}
+
+static int em_gio_get(struct gpio_chip *chip, unsigned offset)
+{
+	return !!(em_gio_read(gpio_to_priv(chip), GIO_I) & BIT(offset));
+}
+
+static void __em_gio_set(struct gpio_chip *chip, unsigned int reg,
+			 unsigned shift, int value)
+{
+	/* upper 16 bits contains mask and lower 16 actual value */
+	em_gio_write(gpio_to_priv(chip), reg,
+		     (BIT(shift + 16)) | (value << shift));
+}
+
+static void em_gio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	/* output is split into two registers */
+	if (offset < 16)
+		__em_gio_set(chip, GIO_OL, offset, value);
+	else
+		__em_gio_set(chip, GIO_OH, offset - 16, value);
+}
+
+static int em_gio_direction_output(struct gpio_chip *chip, unsigned offset,
+				   int value)
+{
+	/* write GPIO value to output before selecting output mode of pin */
+	em_gio_set(chip, offset, value);
+	em_gio_write(gpio_to_priv(chip), GIO_E1, BIT(offset));
+	return 0;
+}
+
+static int em_gio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	return irq_create_mapping(gpio_to_priv(chip)->irq_domain, offset);
+}
+
+static int em_gio_request(struct gpio_chip *chip, unsigned offset)
+{
+	return pinctrl_gpio_request(chip->base + offset);
+}
+
+static void em_gio_free(struct gpio_chip *chip, unsigned offset)
+{
+	pinctrl_gpio_free(chip->base + offset);
+
+	/* Set the GPIO as an input to ensure that the next GPIO request won't
+	* drive the GPIO pin as an output.
+	*/
+	em_gio_direction_input(chip, offset);
+}
+
+static int em_gio_irq_domain_map(struct irq_domain *h, unsigned int irq,
+				 irq_hw_number_t hwirq)
+{
+	struct em_gio_priv *p = h->host_data;
+
+	pr_debug("gio: map hw irq = %d, irq = %d\n", (int)hwirq, irq);
+
+	irq_set_chip_data(irq, h->host_data);
+	irq_set_chip_and_handler(irq, &p->irq_chip, handle_level_irq);
+	return 0;
+}
+
+static const struct irq_domain_ops em_gio_irq_domain_ops = {
+	.map	= em_gio_irq_domain_map,
+	.xlate	= irq_domain_xlate_twocell,
+};
+
+static void em_gio_irq_domain_remove(void *data)
+{
+	struct irq_domain *domain = data;
+
+	irq_domain_remove(domain);
+}
+
+static int em_gio_probe(struct platform_device *pdev)
+{
+	struct em_gio_priv *p;
+	struct gpio_chip *gpio_chip;
+	struct irq_chip *irq_chip;
+	struct device *dev = &pdev->dev;
+	const char *name = dev_name(dev);
+	unsigned int ngpios;
+	int irq[2], ret;
+
+	p = devm_kzalloc(dev, sizeof(*p), GFP_KERNEL);
+	if (!p)
+		return -ENOMEM;
+
+	p->pdev = pdev;
+	platform_set_drvdata(pdev, p);
+	spin_lock_init(&p->sense_lock);
+
+	irq[0] = platform_get_irq(pdev, 0);
+	if (irq[0] < 0)
+		return irq[0];
+
+	irq[1] = platform_get_irq(pdev, 1);
+	if (irq[1] < 0)
+		return irq[1];
+
+	p->base0 = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(p->base0))
+		return PTR_ERR(p->base0);
+
+	p->base1 = devm_platform_ioremap_resource(pdev, 1);
+	if (IS_ERR(p->base1))
+		return PTR_ERR(p->base1);
+
+	if (of_property_read_u32(dev->of_node, "ngpios", &ngpios)) {
+		dev_err(dev, "Missing ngpios OF property\n");
+		return -EINVAL;
+	}
+
+	gpio_chip = &p->gpio_chip;
+	gpio_chip->of_node = dev->of_node;
+	gpio_chip->direction_input = em_gio_direction_input;
+	gpio_chip->get = em_gio_get;
+	gpio_chip->direction_output = em_gio_direction_output;
+	gpio_chip->set = em_gio_set;
+	gpio_chip->to_irq = em_gio_to_irq;
+	gpio_chip->request = em_gio_request;
+	gpio_chip->free = em_gio_free;
+	gpio_chip->label = name;
+	gpio_chip->parent = dev;
+	gpio_chip->owner = THIS_MODULE;
+	gpio_chip->base = -1;
+	gpio_chip->ngpio = ngpios;
+
+	irq_chip = &p->irq_chip;
+	irq_chip->name = "gpio-em";
+	irq_chip->irq_mask = em_gio_irq_disable;
+	irq_chip->irq_unmask = em_gio_irq_enable;
+	irq_chip->irq_set_type = em_gio_irq_set_type;
+	irq_chip->irq_request_resources = em_gio_irq_reqres;
+	irq_chip->irq_release_resources = em_gio_irq_relres;
+	irq_chip->flags	= IRQCHIP_SKIP_SET_WAKE | IRQCHIP_MASK_ON_SUSPEND;
+
+	p->irq_domain = irq_domain_add_simple(dev->of_node, ngpios, 0,
+					      &em_gio_irq_domain_ops, p);
+	if (!p->irq_domain) {
+		dev_err(dev, "cannot initialize irq domain\n");
+		return -ENXIO;
+	}
+
+	ret = devm_add_action_or_reset(dev, em_gio_irq_domain_remove,
+				       p->irq_domain);
+	if (ret)
+		return ret;
+
+	if (devm_request_irq(dev, irq[0], em_gio_irq_handler, 0, name, p)) {
+		dev_err(dev, "failed to request low IRQ\n");
+		return -ENOENT;
+	}
+
+	if (devm_request_irq(dev, irq[1], em_gio_irq_handler, 0, name, p)) {
+		dev_err(dev, "failed to request high IRQ\n");
+		return -ENOENT;
+	}
+
+	ret = devm_gpiochip_add_data(dev, gpio_chip, p);
+	if (ret) {
+		dev_err(dev, "failed to add GPIO controller\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id em_gio_dt_ids[] = {
+	{ .compatible = "renesas,em-gio", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, em_gio_dt_ids);
+
+static struct platform_driver em_gio_device_driver = {
+	.probe		= em_gio_probe,
+	.driver		= {
+		.name	= "em_gio",
+		.of_match_table = em_gio_dt_ids,
+	}
+};
+
+static int __init em_gio_init(void)
+{
+	return platform_driver_register(&em_gio_device_driver);
+}
+postcore_initcall(em_gio_init);
+
+static void __exit em_gio_exit(void)
+{
+	platform_driver_unregister(&em_gio_device_driver);
+}
+module_exit(em_gio_exit);
+
+MODULE_AUTHOR("Magnus Damm");
+MODULE_DESCRIPTION("Renesas Emma Mobile GIO Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-ep93xx.c b/drivers/gpio/gpio-ep93xx.c
new file mode 100644
index 000000000..94d9fa0d6
--- /dev/null
+++ b/drivers/gpio/gpio-ep93xx.c
@@ -0,0 +1,465 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Generic EP93xx GPIO handling
+ *
+ * Copyright (c) 2008 Ryan Mallon
+ * Copyright (c) 2011 H Hartley Sweeten <hsweeten@visionengravers.com>
+ *
+ * Based on code originally from:
+ *  linux/arch/arm/mach-ep93xx/core.c
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/slab.h>
+#include <linux/gpio/driver.h>
+#include <linux/bitops.h>
+
+#define EP93XX_GPIO_F_INT_STATUS 0x5c
+#define EP93XX_GPIO_A_INT_STATUS 0xa0
+#define EP93XX_GPIO_B_INT_STATUS 0xbc
+
+/* Maximum value for gpio line identifiers */
+#define EP93XX_GPIO_LINE_MAX 63
+
+/* Number of GPIO chips in EP93XX */
+#define EP93XX_GPIO_CHIP_NUM 8
+
+/* Maximum value for irq capable line identifiers */
+#define EP93XX_GPIO_LINE_MAX_IRQ 23
+
+/*
+ * Static mapping of GPIO bank F IRQS:
+ * F0..F7 (16..24) to irq 80..87.
+ */
+#define EP93XX_GPIO_F_IRQ_BASE 80
+
+struct ep93xx_gpio_irq_chip {
+	struct irq_chip ic;
+	u8 irq_offset;
+	u8 int_unmasked;
+	u8 int_enabled;
+	u8 int_type1;
+	u8 int_type2;
+	u8 int_debounce;
+};
+
+struct ep93xx_gpio_chip {
+	struct gpio_chip		gc;
+	struct ep93xx_gpio_irq_chip	*eic;
+};
+
+struct ep93xx_gpio {
+	void __iomem		*base;
+	struct ep93xx_gpio_chip	gc[EP93XX_GPIO_CHIP_NUM];
+};
+
+#define to_ep93xx_gpio_chip(x) container_of(x, struct ep93xx_gpio_chip, gc)
+
+static struct ep93xx_gpio_irq_chip *to_ep93xx_gpio_irq_chip(struct gpio_chip *gc)
+{
+	struct ep93xx_gpio_chip *egc = to_ep93xx_gpio_chip(gc);
+
+	return egc->eic;
+}
+
+/*************************************************************************
+ * Interrupt handling for EP93xx on-chip GPIOs
+ *************************************************************************/
+#define EP93XX_INT_TYPE1_OFFSET		0x00
+#define EP93XX_INT_TYPE2_OFFSET		0x04
+#define EP93XX_INT_EOI_OFFSET		0x08
+#define EP93XX_INT_EN_OFFSET		0x0c
+#define EP93XX_INT_STATUS_OFFSET	0x10
+#define EP93XX_INT_RAW_STATUS_OFFSET	0x14
+#define EP93XX_INT_DEBOUNCE_OFFSET	0x18
+
+static void ep93xx_gpio_update_int_params(struct ep93xx_gpio *epg,
+					  struct ep93xx_gpio_irq_chip *eic)
+{
+	writeb_relaxed(0, epg->base + eic->irq_offset + EP93XX_INT_EN_OFFSET);
+
+	writeb_relaxed(eic->int_type2,
+		       epg->base + eic->irq_offset + EP93XX_INT_TYPE2_OFFSET);
+
+	writeb_relaxed(eic->int_type1,
+		       epg->base + eic->irq_offset + EP93XX_INT_TYPE1_OFFSET);
+
+	writeb_relaxed(eic->int_unmasked & eic->int_enabled,
+		       epg->base + eic->irq_offset + EP93XX_INT_EN_OFFSET);
+}
+
+static void ep93xx_gpio_int_debounce(struct gpio_chip *gc,
+				     unsigned int offset, bool enable)
+{
+	struct ep93xx_gpio *epg = gpiochip_get_data(gc);
+	struct ep93xx_gpio_irq_chip *eic = to_ep93xx_gpio_irq_chip(gc);
+	int port_mask = BIT(offset);
+
+	if (enable)
+		eic->int_debounce |= port_mask;
+	else
+		eic->int_debounce &= ~port_mask;
+
+	writeb(eic->int_debounce,
+	       epg->base + eic->irq_offset + EP93XX_INT_DEBOUNCE_OFFSET);
+}
+
+static void ep93xx_gpio_ab_irq_handler(struct irq_desc *desc)
+{
+	struct gpio_chip *gc = irq_desc_get_handler_data(desc);
+	struct ep93xx_gpio *epg = gpiochip_get_data(gc);
+	struct irq_chip *irqchip = irq_desc_get_chip(desc);
+	unsigned long stat;
+	int offset;
+
+	chained_irq_enter(irqchip, desc);
+
+	/*
+	 * Dispatch the IRQs to the irqdomain of each A and B
+	 * gpiochip irqdomains depending on what has fired.
+	 * The tricky part is that the IRQ line is shared
+	 * between bank A and B and each has their own gpiochip.
+	 */
+	stat = readb(epg->base + EP93XX_GPIO_A_INT_STATUS);
+	for_each_set_bit(offset, &stat, 8)
+		generic_handle_irq(irq_find_mapping(epg->gc[0].gc.irq.domain,
+						    offset));
+
+	stat = readb(epg->base + EP93XX_GPIO_B_INT_STATUS);
+	for_each_set_bit(offset, &stat, 8)
+		generic_handle_irq(irq_find_mapping(epg->gc[1].gc.irq.domain,
+						    offset));
+
+	chained_irq_exit(irqchip, desc);
+}
+
+static void ep93xx_gpio_f_irq_handler(struct irq_desc *desc)
+{
+	/*
+	 * map discontiguous hw irq range to continuous sw irq range:
+	 *
+	 *  IRQ_EP93XX_GPIO{0..7}MUX -> EP93XX_GPIO_LINE_F{0..7}
+	 */
+	struct irq_chip *irqchip = irq_desc_get_chip(desc);
+	unsigned int irq = irq_desc_get_irq(desc);
+	int port_f_idx = ((irq + 1) & 7) ^ 4; /* {19..22,47..50} -> {0..7} */
+	int gpio_irq = EP93XX_GPIO_F_IRQ_BASE + port_f_idx;
+
+	chained_irq_enter(irqchip, desc);
+	generic_handle_irq(gpio_irq);
+	chained_irq_exit(irqchip, desc);
+}
+
+static void ep93xx_gpio_irq_ack(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct ep93xx_gpio_irq_chip *eic = to_ep93xx_gpio_irq_chip(gc);
+	struct ep93xx_gpio *epg = gpiochip_get_data(gc);
+	int port_mask = BIT(d->irq & 7);
+
+	if (irqd_get_trigger_type(d) == IRQ_TYPE_EDGE_BOTH) {
+		eic->int_type2 ^= port_mask; /* switch edge direction */
+		ep93xx_gpio_update_int_params(epg, eic);
+	}
+
+	writeb(port_mask, epg->base + eic->irq_offset + EP93XX_INT_EOI_OFFSET);
+}
+
+static void ep93xx_gpio_irq_mask_ack(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct ep93xx_gpio_irq_chip *eic = to_ep93xx_gpio_irq_chip(gc);
+	struct ep93xx_gpio *epg = gpiochip_get_data(gc);
+	int port_mask = BIT(d->irq & 7);
+
+	if (irqd_get_trigger_type(d) == IRQ_TYPE_EDGE_BOTH)
+		eic->int_type2 ^= port_mask; /* switch edge direction */
+
+	eic->int_unmasked &= ~port_mask;
+	ep93xx_gpio_update_int_params(epg, eic);
+
+	writeb(port_mask, epg->base + eic->irq_offset + EP93XX_INT_EOI_OFFSET);
+}
+
+static void ep93xx_gpio_irq_mask(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct ep93xx_gpio_irq_chip *eic = to_ep93xx_gpio_irq_chip(gc);
+	struct ep93xx_gpio *epg = gpiochip_get_data(gc);
+
+	eic->int_unmasked &= ~BIT(d->irq & 7);
+	ep93xx_gpio_update_int_params(epg, eic);
+}
+
+static void ep93xx_gpio_irq_unmask(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct ep93xx_gpio_irq_chip *eic = to_ep93xx_gpio_irq_chip(gc);
+	struct ep93xx_gpio *epg = gpiochip_get_data(gc);
+
+	eic->int_unmasked |= BIT(d->irq & 7);
+	ep93xx_gpio_update_int_params(epg, eic);
+}
+
+/*
+ * gpio_int_type1 controls whether the interrupt is level (0) or
+ * edge (1) triggered, while gpio_int_type2 controls whether it
+ * triggers on low/falling (0) or high/rising (1).
+ */
+static int ep93xx_gpio_irq_type(struct irq_data *d, unsigned int type)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct ep93xx_gpio_irq_chip *eic = to_ep93xx_gpio_irq_chip(gc);
+	struct ep93xx_gpio *epg = gpiochip_get_data(gc);
+	int offset = d->irq & 7;
+	int port_mask = BIT(offset);
+	irq_flow_handler_t handler;
+
+	gc->direction_input(gc, offset);
+
+	switch (type) {
+	case IRQ_TYPE_EDGE_RISING:
+		eic->int_type1 |= port_mask;
+		eic->int_type2 |= port_mask;
+		handler = handle_edge_irq;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		eic->int_type1 |= port_mask;
+		eic->int_type2 &= ~port_mask;
+		handler = handle_edge_irq;
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		eic->int_type1 &= ~port_mask;
+		eic->int_type2 |= port_mask;
+		handler = handle_level_irq;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		eic->int_type1 &= ~port_mask;
+		eic->int_type2 &= ~port_mask;
+		handler = handle_level_irq;
+		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		eic->int_type1 |= port_mask;
+		/* set initial polarity based on current input level */
+		if (gc->get(gc, offset))
+			eic->int_type2 &= ~port_mask; /* falling */
+		else
+			eic->int_type2 |= port_mask; /* rising */
+		handler = handle_edge_irq;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	irq_set_handler_locked(d, handler);
+
+	eic->int_enabled |= port_mask;
+
+	ep93xx_gpio_update_int_params(epg, eic);
+
+	return 0;
+}
+
+/*************************************************************************
+ * gpiolib interface for EP93xx on-chip GPIOs
+ *************************************************************************/
+struct ep93xx_gpio_bank {
+	const char	*label;
+	int		data;
+	int		dir;
+	int		irq;
+	int		base;
+	bool		has_irq;
+	bool		has_hierarchical_irq;
+	unsigned int	irq_base;
+};
+
+#define EP93XX_GPIO_BANK(_label, _data, _dir, _irq, _base, _has_irq, _has_hier, _irq_base) \
+	{							\
+		.label		= _label,			\
+		.data		= _data,			\
+		.dir		= _dir,				\
+		.irq		= _irq,				\
+		.base		= _base,			\
+		.has_irq	= _has_irq,			\
+		.has_hierarchical_irq = _has_hier,		\
+		.irq_base	= _irq_base,			\
+	}
+
+static struct ep93xx_gpio_bank ep93xx_gpio_banks[] = {
+	/* Bank A has 8 IRQs */
+	EP93XX_GPIO_BANK("A", 0x00, 0x10, 0x90, 0, true, false, 64),
+	/* Bank B has 8 IRQs */
+	EP93XX_GPIO_BANK("B", 0x04, 0x14, 0xac, 8, true, false, 72),
+	EP93XX_GPIO_BANK("C", 0x08, 0x18, 0x00, 40, false, false, 0),
+	EP93XX_GPIO_BANK("D", 0x0c, 0x1c, 0x00, 24, false, false, 0),
+	EP93XX_GPIO_BANK("E", 0x20, 0x24, 0x00, 32, false, false, 0),
+	/* Bank F has 8 IRQs */
+	EP93XX_GPIO_BANK("F", 0x30, 0x34, 0x4c, 16, false, true, 0),
+	EP93XX_GPIO_BANK("G", 0x38, 0x3c, 0x00, 48, false, false, 0),
+	EP93XX_GPIO_BANK("H", 0x40, 0x44, 0x00, 56, false, false, 0),
+};
+
+static int ep93xx_gpio_set_config(struct gpio_chip *gc, unsigned offset,
+				  unsigned long config)
+{
+	u32 debounce;
+
+	if (pinconf_to_config_param(config) != PIN_CONFIG_INPUT_DEBOUNCE)
+		return -ENOTSUPP;
+
+	debounce = pinconf_to_config_argument(config);
+	ep93xx_gpio_int_debounce(gc, offset, debounce ? true : false);
+
+	return 0;
+}
+
+static int ep93xx_gpio_f_to_irq(struct gpio_chip *gc, unsigned offset)
+{
+	return EP93XX_GPIO_F_IRQ_BASE + offset;
+}
+
+static void ep93xx_init_irq_chip(struct device *dev, struct irq_chip *ic)
+{
+	ic->irq_ack = ep93xx_gpio_irq_ack;
+	ic->irq_mask_ack = ep93xx_gpio_irq_mask_ack;
+	ic->irq_mask = ep93xx_gpio_irq_mask;
+	ic->irq_unmask = ep93xx_gpio_irq_unmask;
+	ic->irq_set_type = ep93xx_gpio_irq_type;
+}
+
+static int ep93xx_gpio_add_bank(struct ep93xx_gpio_chip *egc,
+				struct platform_device *pdev,
+				struct ep93xx_gpio *epg,
+				struct ep93xx_gpio_bank *bank)
+{
+	void __iomem *data = epg->base + bank->data;
+	void __iomem *dir = epg->base + bank->dir;
+	struct gpio_chip *gc = &egc->gc;
+	struct device *dev = &pdev->dev;
+	struct gpio_irq_chip *girq;
+	int err;
+
+	err = bgpio_init(gc, dev, 1, data, NULL, NULL, dir, NULL, 0);
+	if (err)
+		return err;
+
+	gc->label = bank->label;
+	gc->base = bank->base;
+
+	girq = &gc->irq;
+	if (bank->has_irq || bank->has_hierarchical_irq) {
+		struct irq_chip *ic;
+
+		gc->set_config = ep93xx_gpio_set_config;
+		egc->eic = devm_kcalloc(dev, 1,
+					sizeof(*egc->eic),
+					GFP_KERNEL);
+		if (!egc->eic)
+			return -ENOMEM;
+		egc->eic->irq_offset = bank->irq;
+		ic = &egc->eic->ic;
+		ic->name = devm_kasprintf(dev, GFP_KERNEL, "gpio-irq-%s", bank->label);
+		if (!ic->name)
+			return -ENOMEM;
+		ep93xx_init_irq_chip(dev, ic);
+		girq->chip = ic;
+	}
+
+	if (bank->has_irq) {
+		int ab_parent_irq = platform_get_irq(pdev, 0);
+
+		girq->parent_handler = ep93xx_gpio_ab_irq_handler;
+		girq->num_parents = 1;
+		girq->parents = devm_kcalloc(dev, 1,
+					     sizeof(*girq->parents),
+					     GFP_KERNEL);
+		if (!girq->parents)
+			return -ENOMEM;
+		girq->default_type = IRQ_TYPE_NONE;
+		girq->handler = handle_level_irq;
+		girq->parents[0] = ab_parent_irq;
+		girq->first = bank->irq_base;
+	}
+
+	/* Only bank F has especially funky IRQ handling */
+	if (bank->has_hierarchical_irq) {
+		int gpio_irq;
+		int i;
+
+		/*
+		 * FIXME: convert this to use hierarchical IRQ support!
+		 * this requires fixing the root irqchip to be hierarchial.
+		 */
+		girq->parent_handler = ep93xx_gpio_f_irq_handler;
+		girq->num_parents = 8;
+		girq->parents = devm_kcalloc(dev, 8,
+					     sizeof(*girq->parents),
+					     GFP_KERNEL);
+		if (!girq->parents)
+			return -ENOMEM;
+		/* Pick resources 1..8 for these IRQs */
+		for (i = 1; i <= 8; i++)
+			girq->parents[i - 1] = platform_get_irq(pdev, i);
+		for (i = 0; i < 8; i++) {
+			gpio_irq = EP93XX_GPIO_F_IRQ_BASE + i;
+			irq_set_chip_data(gpio_irq, &epg->gc[5]);
+			irq_set_chip_and_handler(gpio_irq,
+						 girq->chip,
+						 handle_level_irq);
+			irq_clear_status_flags(gpio_irq, IRQ_NOREQUEST);
+		}
+		girq->default_type = IRQ_TYPE_NONE;
+		girq->handler = handle_level_irq;
+		gc->to_irq = ep93xx_gpio_f_to_irq;
+	}
+
+	return devm_gpiochip_add_data(dev, gc, epg);
+}
+
+static int ep93xx_gpio_probe(struct platform_device *pdev)
+{
+	struct ep93xx_gpio *epg;
+	int i;
+
+	epg = devm_kzalloc(&pdev->dev, sizeof(*epg), GFP_KERNEL);
+	if (!epg)
+		return -ENOMEM;
+
+	epg->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(epg->base))
+		return PTR_ERR(epg->base);
+
+	for (i = 0; i < ARRAY_SIZE(ep93xx_gpio_banks); i++) {
+		struct ep93xx_gpio_chip *gc = &epg->gc[i];
+		struct ep93xx_gpio_bank *bank = &ep93xx_gpio_banks[i];
+
+		if (ep93xx_gpio_add_bank(gc, pdev, epg, bank))
+			dev_warn(&pdev->dev, "Unable to add gpio bank %s\n",
+				 bank->label);
+	}
+
+	return 0;
+}
+
+static struct platform_driver ep93xx_gpio_driver = {
+	.driver		= {
+		.name	= "gpio-ep93xx",
+	},
+	.probe		= ep93xx_gpio_probe,
+};
+
+static int __init ep93xx_gpio_init(void)
+{
+	return platform_driver_register(&ep93xx_gpio_driver);
+}
+postcore_initcall(ep93xx_gpio_init);
+
+MODULE_AUTHOR("Ryan Mallon <ryan@bluewatersys.com> "
+		"H Hartley Sweeten <hsweeten@visionengravers.com>");
+MODULE_DESCRIPTION("EP93XX GPIO driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/gpio-exar.c b/drivers/gpio/gpio-exar.c
new file mode 100644
index 000000000..b1accfba0
--- /dev/null
+++ b/drivers/gpio/gpio-exar.c
@@ -0,0 +1,209 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * GPIO driver for Exar XR17V35X chip
+ *
+ * Copyright (C) 2015 Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
+ */
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/gpio/driver.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+
+#define EXAR_OFFSET_MPIOLVL_LO 0x90
+#define EXAR_OFFSET_MPIOSEL_LO 0x93
+#define EXAR_OFFSET_MPIOLVL_HI 0x96
+#define EXAR_OFFSET_MPIOSEL_HI 0x99
+
+#define DRIVER_NAME "gpio_exar"
+
+static DEFINE_IDA(ida_index);
+
+struct exar_gpio_chip {
+	struct gpio_chip gpio_chip;
+	struct mutex lock;
+	int index;
+	void __iomem *regs;
+	char name[20];
+	unsigned int first_pin;
+};
+
+static void exar_update(struct gpio_chip *chip, unsigned int reg, int val,
+			unsigned int offset)
+{
+	struct exar_gpio_chip *exar_gpio = gpiochip_get_data(chip);
+	int temp;
+
+	mutex_lock(&exar_gpio->lock);
+	temp = readb(exar_gpio->regs + reg);
+	temp &= ~BIT(offset);
+	if (val)
+		temp |= BIT(offset);
+	writeb(temp, exar_gpio->regs + reg);
+	mutex_unlock(&exar_gpio->lock);
+}
+
+static int exar_set_direction(struct gpio_chip *chip, int direction,
+			      unsigned int offset)
+{
+	struct exar_gpio_chip *exar_gpio = gpiochip_get_data(chip);
+	unsigned int addr = (offset + exar_gpio->first_pin) / 8 ?
+		EXAR_OFFSET_MPIOSEL_HI : EXAR_OFFSET_MPIOSEL_LO;
+	unsigned int bit  = (offset + exar_gpio->first_pin) % 8;
+
+	exar_update(chip, addr, direction, bit);
+	return 0;
+}
+
+static int exar_get(struct gpio_chip *chip, unsigned int reg)
+{
+	struct exar_gpio_chip *exar_gpio = gpiochip_get_data(chip);
+	int value;
+
+	mutex_lock(&exar_gpio->lock);
+	value = readb(exar_gpio->regs + reg);
+	mutex_unlock(&exar_gpio->lock);
+
+	return value;
+}
+
+static int exar_get_direction(struct gpio_chip *chip, unsigned int offset)
+{
+	struct exar_gpio_chip *exar_gpio = gpiochip_get_data(chip);
+	unsigned int addr = (offset + exar_gpio->first_pin) / 8 ?
+		EXAR_OFFSET_MPIOSEL_HI : EXAR_OFFSET_MPIOSEL_LO;
+	unsigned int bit  = (offset + exar_gpio->first_pin) % 8;
+
+	if (exar_get(chip, addr) & BIT(bit))
+		return GPIO_LINE_DIRECTION_IN;
+
+	return GPIO_LINE_DIRECTION_OUT;
+}
+
+static int exar_get_value(struct gpio_chip *chip, unsigned int offset)
+{
+	struct exar_gpio_chip *exar_gpio = gpiochip_get_data(chip);
+	unsigned int addr = (offset + exar_gpio->first_pin) / 8 ?
+		EXAR_OFFSET_MPIOLVL_HI : EXAR_OFFSET_MPIOLVL_LO;
+	unsigned int bit  = (offset + exar_gpio->first_pin) % 8;
+
+	return !!(exar_get(chip, addr) & BIT(bit));
+}
+
+static void exar_set_value(struct gpio_chip *chip, unsigned int offset,
+			   int value)
+{
+	struct exar_gpio_chip *exar_gpio = gpiochip_get_data(chip);
+	unsigned int addr = (offset + exar_gpio->first_pin) / 8 ?
+		EXAR_OFFSET_MPIOLVL_HI : EXAR_OFFSET_MPIOLVL_LO;
+	unsigned int bit  = (offset + exar_gpio->first_pin) % 8;
+
+	exar_update(chip, addr, value, bit);
+}
+
+static int exar_direction_output(struct gpio_chip *chip, unsigned int offset,
+				 int value)
+{
+	exar_set_value(chip, offset, value);
+	return exar_set_direction(chip, 0, offset);
+}
+
+static int exar_direction_input(struct gpio_chip *chip, unsigned int offset)
+{
+	return exar_set_direction(chip, 1, offset);
+}
+
+static int gpio_exar_probe(struct platform_device *pdev)
+{
+	struct pci_dev *pcidev = to_pci_dev(pdev->dev.parent);
+	struct exar_gpio_chip *exar_gpio;
+	u32 first_pin, ngpios;
+	void __iomem *p;
+	int index, ret;
+
+	/*
+	 * The UART driver must have mapped region 0 prior to registering this
+	 * device - use it.
+	 */
+	p = pcim_iomap_table(pcidev)[0];
+	if (!p)
+		return -ENOMEM;
+
+	ret = device_property_read_u32(&pdev->dev, "exar,first-pin",
+				       &first_pin);
+	if (ret)
+		return ret;
+
+	ret = device_property_read_u32(&pdev->dev, "ngpios", &ngpios);
+	if (ret)
+		return ret;
+
+	exar_gpio = devm_kzalloc(&pdev->dev, sizeof(*exar_gpio), GFP_KERNEL);
+	if (!exar_gpio)
+		return -ENOMEM;
+
+	mutex_init(&exar_gpio->lock);
+
+	index = ida_simple_get(&ida_index, 0, 0, GFP_KERNEL);
+	if (index < 0) {
+		ret = index;
+		goto err_mutex_destroy;
+	}
+
+	sprintf(exar_gpio->name, "exar_gpio%d", index);
+	exar_gpio->gpio_chip.label = exar_gpio->name;
+	exar_gpio->gpio_chip.parent = &pdev->dev;
+	exar_gpio->gpio_chip.direction_output = exar_direction_output;
+	exar_gpio->gpio_chip.direction_input = exar_direction_input;
+	exar_gpio->gpio_chip.get_direction = exar_get_direction;
+	exar_gpio->gpio_chip.get = exar_get_value;
+	exar_gpio->gpio_chip.set = exar_set_value;
+	exar_gpio->gpio_chip.base = -1;
+	exar_gpio->gpio_chip.ngpio = ngpios;
+	exar_gpio->regs = p;
+	exar_gpio->index = index;
+	exar_gpio->first_pin = first_pin;
+
+	ret = devm_gpiochip_add_data(&pdev->dev,
+				     &exar_gpio->gpio_chip, exar_gpio);
+	if (ret)
+		goto err_destroy;
+
+	platform_set_drvdata(pdev, exar_gpio);
+
+	return 0;
+
+err_destroy:
+	ida_simple_remove(&ida_index, index);
+err_mutex_destroy:
+	mutex_destroy(&exar_gpio->lock);
+	return ret;
+}
+
+static int gpio_exar_remove(struct platform_device *pdev)
+{
+	struct exar_gpio_chip *exar_gpio = platform_get_drvdata(pdev);
+
+	ida_simple_remove(&ida_index, exar_gpio->index);
+	mutex_destroy(&exar_gpio->lock);
+
+	return 0;
+}
+
+static struct platform_driver gpio_exar_driver = {
+	.probe	= gpio_exar_probe,
+	.remove	= gpio_exar_remove,
+	.driver	= {
+		.name = DRIVER_NAME,
+	},
+};
+
+module_platform_driver(gpio_exar_driver);
+
+MODULE_ALIAS("platform:" DRIVER_NAME);
+MODULE_DESCRIPTION("Exar GPIO driver");
+MODULE_AUTHOR("Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/gpio-f7188x.c b/drivers/gpio/gpio-f7188x.c
new file mode 100644
index 000000000..18a3147f5
--- /dev/null
+++ b/drivers/gpio/gpio-f7188x.c
@@ -0,0 +1,611 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * GPIO driver for Fintek Super-I/O F71869, F71869A, F71882, F71889 and F81866
+ *
+ * Copyright (C) 2010-2013 LaCie
+ *
+ * Author: Simon Guinot <simon.guinot@sequanux.org>
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio/driver.h>
+#include <linux/bitops.h>
+
+#define DRVNAME "gpio-f7188x"
+
+/*
+ * Super-I/O registers
+ */
+#define SIO_LDSEL		0x07	/* Logical device select */
+#define SIO_DEVID		0x20	/* Device ID (2 bytes) */
+#define SIO_DEVREV		0x22	/* Device revision */
+#define SIO_MANID		0x23	/* Fintek ID (2 bytes) */
+
+#define SIO_LD_GPIO		0x06	/* GPIO logical device */
+#define SIO_UNLOCK_KEY		0x87	/* Key to enable Super-I/O */
+#define SIO_LOCK_KEY		0xAA	/* Key to disable Super-I/O */
+
+#define SIO_FINTEK_ID		0x1934	/* Manufacturer ID */
+#define SIO_F71869_ID		0x0814	/* F71869 chipset ID */
+#define SIO_F71869A_ID		0x1007	/* F71869A chipset ID */
+#define SIO_F71882_ID		0x0541	/* F71882 chipset ID */
+#define SIO_F71889_ID		0x0909	/* F71889 chipset ID */
+#define SIO_F71889A_ID		0x1005	/* F71889A chipset ID */
+#define SIO_F81866_ID		0x1010	/* F81866 chipset ID */
+#define SIO_F81804_ID		0x1502  /* F81804 chipset ID, same for f81966 */
+#define SIO_F81865_ID		0x0704	/* F81865 chipset ID */
+
+
+enum chips {
+	f71869,
+	f71869a,
+	f71882fg,
+	f71889a,
+	f71889f,
+	f81866,
+	f81804,
+	f81865,
+};
+
+static const char * const f7188x_names[] = {
+	"f71869",
+	"f71869a",
+	"f71882fg",
+	"f71889a",
+	"f71889f",
+	"f81866",
+	"f81804",
+	"f81865",
+};
+
+struct f7188x_sio {
+	int addr;
+	enum chips type;
+};
+
+struct f7188x_gpio_bank {
+	struct gpio_chip chip;
+	unsigned int regbase;
+	struct f7188x_gpio_data *data;
+};
+
+struct f7188x_gpio_data {
+	struct f7188x_sio *sio;
+	int nr_bank;
+	struct f7188x_gpio_bank *bank;
+};
+
+/*
+ * Super-I/O functions.
+ */
+
+static inline int superio_inb(int base, int reg)
+{
+	outb(reg, base);
+	return inb(base + 1);
+}
+
+static int superio_inw(int base, int reg)
+{
+	int val;
+
+	outb(reg++, base);
+	val = inb(base + 1) << 8;
+	outb(reg, base);
+	val |= inb(base + 1);
+
+	return val;
+}
+
+static inline void superio_outb(int base, int reg, int val)
+{
+	outb(reg, base);
+	outb(val, base + 1);
+}
+
+static inline int superio_enter(int base)
+{
+	/* Don't step on other drivers' I/O space by accident. */
+	if (!request_muxed_region(base, 2, DRVNAME)) {
+		pr_err(DRVNAME "I/O address 0x%04x already in use\n", base);
+		return -EBUSY;
+	}
+
+	/* According to the datasheet the key must be send twice. */
+	outb(SIO_UNLOCK_KEY, base);
+	outb(SIO_UNLOCK_KEY, base);
+
+	return 0;
+}
+
+static inline void superio_select(int base, int ld)
+{
+	outb(SIO_LDSEL, base);
+	outb(ld, base + 1);
+}
+
+static inline void superio_exit(int base)
+{
+	outb(SIO_LOCK_KEY, base);
+	release_region(base, 2);
+}
+
+/*
+ * GPIO chip.
+ */
+
+static int f7188x_gpio_get_direction(struct gpio_chip *chip, unsigned offset);
+static int f7188x_gpio_direction_in(struct gpio_chip *chip, unsigned offset);
+static int f7188x_gpio_get(struct gpio_chip *chip, unsigned offset);
+static int f7188x_gpio_direction_out(struct gpio_chip *chip,
+				     unsigned offset, int value);
+static void f7188x_gpio_set(struct gpio_chip *chip, unsigned offset, int value);
+static int f7188x_gpio_set_config(struct gpio_chip *chip, unsigned offset,
+				  unsigned long config);
+
+#define F7188X_GPIO_BANK(_base, _ngpio, _regbase)			\
+	{								\
+		.chip = {						\
+			.label            = DRVNAME,			\
+			.owner            = THIS_MODULE,		\
+			.get_direction    = f7188x_gpio_get_direction,	\
+			.direction_input  = f7188x_gpio_direction_in,	\
+			.get              = f7188x_gpio_get,		\
+			.direction_output = f7188x_gpio_direction_out,	\
+			.set              = f7188x_gpio_set,		\
+			.set_config	  = f7188x_gpio_set_config,	\
+			.base             = _base,			\
+			.ngpio            = _ngpio,			\
+			.can_sleep        = true,			\
+		},							\
+		.regbase = _regbase,					\
+	}
+
+#define gpio_dir(base) (base + 0)
+#define gpio_data_out(base) (base + 1)
+#define gpio_data_in(base) (base + 2)
+/* Output mode register (0:open drain 1:push-pull). */
+#define gpio_out_mode(base) (base + 3)
+
+static struct f7188x_gpio_bank f71869_gpio_bank[] = {
+	F7188X_GPIO_BANK(0, 6, 0xF0),
+	F7188X_GPIO_BANK(10, 8, 0xE0),
+	F7188X_GPIO_BANK(20, 8, 0xD0),
+	F7188X_GPIO_BANK(30, 8, 0xC0),
+	F7188X_GPIO_BANK(40, 8, 0xB0),
+	F7188X_GPIO_BANK(50, 5, 0xA0),
+	F7188X_GPIO_BANK(60, 6, 0x90),
+};
+
+static struct f7188x_gpio_bank f71869a_gpio_bank[] = {
+	F7188X_GPIO_BANK(0, 6, 0xF0),
+	F7188X_GPIO_BANK(10, 8, 0xE0),
+	F7188X_GPIO_BANK(20, 8, 0xD0),
+	F7188X_GPIO_BANK(30, 8, 0xC0),
+	F7188X_GPIO_BANK(40, 8, 0xB0),
+	F7188X_GPIO_BANK(50, 5, 0xA0),
+	F7188X_GPIO_BANK(60, 8, 0x90),
+	F7188X_GPIO_BANK(70, 8, 0x80),
+};
+
+static struct f7188x_gpio_bank f71882_gpio_bank[] = {
+	F7188X_GPIO_BANK(0, 8, 0xF0),
+	F7188X_GPIO_BANK(10, 8, 0xE0),
+	F7188X_GPIO_BANK(20, 8, 0xD0),
+	F7188X_GPIO_BANK(30, 4, 0xC0),
+	F7188X_GPIO_BANK(40, 4, 0xB0),
+};
+
+static struct f7188x_gpio_bank f71889a_gpio_bank[] = {
+	F7188X_GPIO_BANK(0, 7, 0xF0),
+	F7188X_GPIO_BANK(10, 7, 0xE0),
+	F7188X_GPIO_BANK(20, 8, 0xD0),
+	F7188X_GPIO_BANK(30, 8, 0xC0),
+	F7188X_GPIO_BANK(40, 8, 0xB0),
+	F7188X_GPIO_BANK(50, 5, 0xA0),
+	F7188X_GPIO_BANK(60, 8, 0x90),
+	F7188X_GPIO_BANK(70, 8, 0x80),
+};
+
+static struct f7188x_gpio_bank f71889_gpio_bank[] = {
+	F7188X_GPIO_BANK(0, 7, 0xF0),
+	F7188X_GPIO_BANK(10, 7, 0xE0),
+	F7188X_GPIO_BANK(20, 8, 0xD0),
+	F7188X_GPIO_BANK(30, 8, 0xC0),
+	F7188X_GPIO_BANK(40, 8, 0xB0),
+	F7188X_GPIO_BANK(50, 5, 0xA0),
+	F7188X_GPIO_BANK(60, 8, 0x90),
+	F7188X_GPIO_BANK(70, 8, 0x80),
+};
+
+static struct f7188x_gpio_bank f81866_gpio_bank[] = {
+	F7188X_GPIO_BANK(0, 8, 0xF0),
+	F7188X_GPIO_BANK(10, 8, 0xE0),
+	F7188X_GPIO_BANK(20, 8, 0xD0),
+	F7188X_GPIO_BANK(30, 8, 0xC0),
+	F7188X_GPIO_BANK(40, 8, 0xB0),
+	F7188X_GPIO_BANK(50, 8, 0xA0),
+	F7188X_GPIO_BANK(60, 8, 0x90),
+	F7188X_GPIO_BANK(70, 8, 0x80),
+	F7188X_GPIO_BANK(80, 8, 0x88),
+};
+
+
+static struct f7188x_gpio_bank f81804_gpio_bank[] = {
+	F7188X_GPIO_BANK(0, 8, 0xF0),
+	F7188X_GPIO_BANK(10, 8, 0xE0),
+	F7188X_GPIO_BANK(20, 8, 0xD0),
+	F7188X_GPIO_BANK(50, 8, 0xA0),
+	F7188X_GPIO_BANK(60, 8, 0x90),
+	F7188X_GPIO_BANK(70, 8, 0x80),
+	F7188X_GPIO_BANK(90, 8, 0x98),
+};
+
+static struct f7188x_gpio_bank f81865_gpio_bank[] = {
+	F7188X_GPIO_BANK(0, 8, 0xF0),
+	F7188X_GPIO_BANK(10, 8, 0xE0),
+	F7188X_GPIO_BANK(20, 8, 0xD0),
+	F7188X_GPIO_BANK(30, 8, 0xC0),
+	F7188X_GPIO_BANK(40, 8, 0xB0),
+	F7188X_GPIO_BANK(50, 8, 0xA0),
+	F7188X_GPIO_BANK(60, 5, 0x90),
+};
+
+static int f7188x_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
+{
+	int err;
+	struct f7188x_gpio_bank *bank = gpiochip_get_data(chip);
+	struct f7188x_sio *sio = bank->data->sio;
+	u8 dir;
+
+	err = superio_enter(sio->addr);
+	if (err)
+		return err;
+	superio_select(sio->addr, SIO_LD_GPIO);
+
+	dir = superio_inb(sio->addr, gpio_dir(bank->regbase));
+
+	superio_exit(sio->addr);
+
+	if (dir & 1 << offset)
+		return GPIO_LINE_DIRECTION_OUT;
+
+	return GPIO_LINE_DIRECTION_IN;
+}
+
+static int f7188x_gpio_direction_in(struct gpio_chip *chip, unsigned offset)
+{
+	int err;
+	struct f7188x_gpio_bank *bank = gpiochip_get_data(chip);
+	struct f7188x_sio *sio = bank->data->sio;
+	u8 dir;
+
+	err = superio_enter(sio->addr);
+	if (err)
+		return err;
+	superio_select(sio->addr, SIO_LD_GPIO);
+
+	dir = superio_inb(sio->addr, gpio_dir(bank->regbase));
+	dir &= ~BIT(offset);
+	superio_outb(sio->addr, gpio_dir(bank->regbase), dir);
+
+	superio_exit(sio->addr);
+
+	return 0;
+}
+
+static int f7188x_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	int err;
+	struct f7188x_gpio_bank *bank = gpiochip_get_data(chip);
+	struct f7188x_sio *sio = bank->data->sio;
+	u8 dir, data;
+
+	err = superio_enter(sio->addr);
+	if (err)
+		return err;
+	superio_select(sio->addr, SIO_LD_GPIO);
+
+	dir = superio_inb(sio->addr, gpio_dir(bank->regbase));
+	dir = !!(dir & BIT(offset));
+	if (dir)
+		data = superio_inb(sio->addr, gpio_data_out(bank->regbase));
+	else
+		data = superio_inb(sio->addr, gpio_data_in(bank->regbase));
+
+	superio_exit(sio->addr);
+
+	return !!(data & BIT(offset));
+}
+
+static int f7188x_gpio_direction_out(struct gpio_chip *chip,
+				     unsigned offset, int value)
+{
+	int err;
+	struct f7188x_gpio_bank *bank = gpiochip_get_data(chip);
+	struct f7188x_sio *sio = bank->data->sio;
+	u8 dir, data_out;
+
+	err = superio_enter(sio->addr);
+	if (err)
+		return err;
+	superio_select(sio->addr, SIO_LD_GPIO);
+
+	data_out = superio_inb(sio->addr, gpio_data_out(bank->regbase));
+	if (value)
+		data_out |= BIT(offset);
+	else
+		data_out &= ~BIT(offset);
+	superio_outb(sio->addr, gpio_data_out(bank->regbase), data_out);
+
+	dir = superio_inb(sio->addr, gpio_dir(bank->regbase));
+	dir |= BIT(offset);
+	superio_outb(sio->addr, gpio_dir(bank->regbase), dir);
+
+	superio_exit(sio->addr);
+
+	return 0;
+}
+
+static void f7188x_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	int err;
+	struct f7188x_gpio_bank *bank = gpiochip_get_data(chip);
+	struct f7188x_sio *sio = bank->data->sio;
+	u8 data_out;
+
+	err = superio_enter(sio->addr);
+	if (err)
+		return;
+	superio_select(sio->addr, SIO_LD_GPIO);
+
+	data_out = superio_inb(sio->addr, gpio_data_out(bank->regbase));
+	if (value)
+		data_out |= BIT(offset);
+	else
+		data_out &= ~BIT(offset);
+	superio_outb(sio->addr, gpio_data_out(bank->regbase), data_out);
+
+	superio_exit(sio->addr);
+}
+
+static int f7188x_gpio_set_config(struct gpio_chip *chip, unsigned offset,
+				  unsigned long config)
+{
+	int err;
+	enum pin_config_param param = pinconf_to_config_param(config);
+	struct f7188x_gpio_bank *bank = gpiochip_get_data(chip);
+	struct f7188x_sio *sio = bank->data->sio;
+	u8 data;
+
+	if (param != PIN_CONFIG_DRIVE_OPEN_DRAIN &&
+	    param != PIN_CONFIG_DRIVE_PUSH_PULL)
+		return -ENOTSUPP;
+
+	err = superio_enter(sio->addr);
+	if (err)
+		return err;
+	superio_select(sio->addr, SIO_LD_GPIO);
+
+	data = superio_inb(sio->addr, gpio_out_mode(bank->regbase));
+	if (param == PIN_CONFIG_DRIVE_OPEN_DRAIN)
+		data &= ~BIT(offset);
+	else
+		data |= BIT(offset);
+	superio_outb(sio->addr, gpio_out_mode(bank->regbase), data);
+
+	superio_exit(sio->addr);
+	return 0;
+}
+
+/*
+ * Platform device and driver.
+ */
+
+static int f7188x_gpio_probe(struct platform_device *pdev)
+{
+	int err;
+	int i;
+	struct f7188x_sio *sio = dev_get_platdata(&pdev->dev);
+	struct f7188x_gpio_data *data;
+
+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	switch (sio->type) {
+	case f71869:
+		data->nr_bank = ARRAY_SIZE(f71869_gpio_bank);
+		data->bank = f71869_gpio_bank;
+		break;
+	case f71869a:
+		data->nr_bank = ARRAY_SIZE(f71869a_gpio_bank);
+		data->bank = f71869a_gpio_bank;
+		break;
+	case f71882fg:
+		data->nr_bank = ARRAY_SIZE(f71882_gpio_bank);
+		data->bank = f71882_gpio_bank;
+		break;
+	case f71889a:
+		data->nr_bank = ARRAY_SIZE(f71889a_gpio_bank);
+		data->bank = f71889a_gpio_bank;
+		break;
+	case f71889f:
+		data->nr_bank = ARRAY_SIZE(f71889_gpio_bank);
+		data->bank = f71889_gpio_bank;
+		break;
+	case f81866:
+		data->nr_bank = ARRAY_SIZE(f81866_gpio_bank);
+		data->bank = f81866_gpio_bank;
+		break;
+	case  f81804:
+		data->nr_bank = ARRAY_SIZE(f81804_gpio_bank);
+		data->bank = f81804_gpio_bank;
+		break;
+	case f81865:
+		data->nr_bank = ARRAY_SIZE(f81865_gpio_bank);
+		data->bank = f81865_gpio_bank;
+		break;
+	default:
+		return -ENODEV;
+	}
+	data->sio = sio;
+
+	platform_set_drvdata(pdev, data);
+
+	/* For each GPIO bank, register a GPIO chip. */
+	for (i = 0; i < data->nr_bank; i++) {
+		struct f7188x_gpio_bank *bank = &data->bank[i];
+
+		bank->chip.parent = &pdev->dev;
+		bank->data = data;
+
+		err = devm_gpiochip_add_data(&pdev->dev, &bank->chip, bank);
+		if (err) {
+			dev_err(&pdev->dev,
+				"Failed to register gpiochip %d: %d\n",
+				i, err);
+			return err;
+		}
+	}
+
+	return 0;
+}
+
+static int __init f7188x_find(int addr, struct f7188x_sio *sio)
+{
+	int err;
+	u16 devid;
+
+	err = superio_enter(addr);
+	if (err)
+		return err;
+
+	err = -ENODEV;
+	devid = superio_inw(addr, SIO_MANID);
+	if (devid != SIO_FINTEK_ID) {
+		pr_debug(DRVNAME ": Not a Fintek device at 0x%08x\n", addr);
+		goto err;
+	}
+
+	devid = superio_inw(addr, SIO_DEVID);
+	switch (devid) {
+	case SIO_F71869_ID:
+		sio->type = f71869;
+		break;
+	case SIO_F71869A_ID:
+		sio->type = f71869a;
+		break;
+	case SIO_F71882_ID:
+		sio->type = f71882fg;
+		break;
+	case SIO_F71889A_ID:
+		sio->type = f71889a;
+		break;
+	case SIO_F71889_ID:
+		sio->type = f71889f;
+		break;
+	case SIO_F81866_ID:
+		sio->type = f81866;
+		break;
+	case SIO_F81804_ID:
+		sio->type = f81804;
+		break;
+	case SIO_F81865_ID:
+		sio->type = f81865;
+		break;
+	default:
+		pr_info(DRVNAME ": Unsupported Fintek device 0x%04x\n", devid);
+		goto err;
+	}
+	sio->addr = addr;
+	err = 0;
+
+	pr_info(DRVNAME ": Found %s at %#x, revision %d\n",
+		f7188x_names[sio->type],
+		(unsigned int) addr,
+		(int) superio_inb(addr, SIO_DEVREV));
+
+err:
+	superio_exit(addr);
+	return err;
+}
+
+static struct platform_device *f7188x_gpio_pdev;
+
+static int __init
+f7188x_gpio_device_add(const struct f7188x_sio *sio)
+{
+	int err;
+
+	f7188x_gpio_pdev = platform_device_alloc(DRVNAME, -1);
+	if (!f7188x_gpio_pdev)
+		return -ENOMEM;
+
+	err = platform_device_add_data(f7188x_gpio_pdev,
+				       sio, sizeof(*sio));
+	if (err) {
+		pr_err(DRVNAME "Platform data allocation failed\n");
+		goto err;
+	}
+
+	err = platform_device_add(f7188x_gpio_pdev);
+	if (err) {
+		pr_err(DRVNAME "Device addition failed\n");
+		goto err;
+	}
+
+	return 0;
+
+err:
+	platform_device_put(f7188x_gpio_pdev);
+
+	return err;
+}
+
+/*
+ * Try to match a supported Fintek device by reading the (hard-wired)
+ * configuration I/O ports. If available, then register both the platform
+ * device and driver to support the GPIOs.
+ */
+
+static struct platform_driver f7188x_gpio_driver = {
+	.driver = {
+		.name	= DRVNAME,
+	},
+	.probe		= f7188x_gpio_probe,
+};
+
+static int __init f7188x_gpio_init(void)
+{
+	int err;
+	struct f7188x_sio sio;
+
+	if (f7188x_find(0x2e, &sio) &&
+	    f7188x_find(0x4e, &sio))
+		return -ENODEV;
+
+	err = platform_driver_register(&f7188x_gpio_driver);
+	if (!err) {
+		err = f7188x_gpio_device_add(&sio);
+		if (err)
+			platform_driver_unregister(&f7188x_gpio_driver);
+	}
+
+	return err;
+}
+subsys_initcall(f7188x_gpio_init);
+
+static void __exit f7188x_gpio_exit(void)
+{
+	platform_device_unregister(f7188x_gpio_pdev);
+	platform_driver_unregister(&f7188x_gpio_driver);
+}
+module_exit(f7188x_gpio_exit);
+
+MODULE_DESCRIPTION("GPIO driver for Super-I/O chips F71869, F71869A, F71882FG, F71889A, F71889F and F81866");
+MODULE_AUTHOR("Simon Guinot <simon.guinot@sequanux.org>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/gpio-ftgpio010.c b/drivers/gpio/gpio-ftgpio010.c
new file mode 100644
index 000000000..403116478
--- /dev/null
+++ b/drivers/gpio/gpio-ftgpio010.c
@@ -0,0 +1,354 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Faraday Technolog FTGPIO010 gpiochip and interrupt routines
+ * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
+ *
+ * Based on arch/arm/mach-gemini/gpio.c:
+ * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * Based on plat-mxc/gpio.c:
+ * MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de>
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ */
+#include <linux/gpio/driver.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/bitops.h>
+#include <linux/clk.h>
+
+/* GPIO registers definition */
+#define GPIO_DATA_OUT		0x00
+#define GPIO_DATA_IN		0x04
+#define GPIO_DIR		0x08
+#define GPIO_BYPASS_IN		0x0C
+#define GPIO_DATA_SET		0x10
+#define GPIO_DATA_CLR		0x14
+#define GPIO_PULL_EN		0x18
+#define GPIO_PULL_TYPE		0x1C
+#define GPIO_INT_EN		0x20
+#define GPIO_INT_STAT_RAW	0x24
+#define GPIO_INT_STAT_MASKED	0x28
+#define GPIO_INT_MASK		0x2C
+#define GPIO_INT_CLR		0x30
+#define GPIO_INT_TYPE		0x34
+#define GPIO_INT_BOTH_EDGE	0x38
+#define GPIO_INT_LEVEL		0x3C
+#define GPIO_DEBOUNCE_EN	0x40
+#define GPIO_DEBOUNCE_PRESCALE	0x44
+
+/**
+ * struct ftgpio_gpio - Gemini GPIO state container
+ * @dev: containing device for this instance
+ * @gc: gpiochip for this instance
+ * @irq: irqchip for this instance
+ * @base: remapped I/O-memory base
+ * @clk: silicon clock
+ */
+struct ftgpio_gpio {
+	struct device *dev;
+	struct gpio_chip gc;
+	struct irq_chip irq;
+	void __iomem *base;
+	struct clk *clk;
+};
+
+static void ftgpio_gpio_ack_irq(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct ftgpio_gpio *g = gpiochip_get_data(gc);
+
+	writel(BIT(irqd_to_hwirq(d)), g->base + GPIO_INT_CLR);
+}
+
+static void ftgpio_gpio_mask_irq(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct ftgpio_gpio *g = gpiochip_get_data(gc);
+	u32 val;
+
+	val = readl(g->base + GPIO_INT_EN);
+	val &= ~BIT(irqd_to_hwirq(d));
+	writel(val, g->base + GPIO_INT_EN);
+}
+
+static void ftgpio_gpio_unmask_irq(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct ftgpio_gpio *g = gpiochip_get_data(gc);
+	u32 val;
+
+	val = readl(g->base + GPIO_INT_EN);
+	val |= BIT(irqd_to_hwirq(d));
+	writel(val, g->base + GPIO_INT_EN);
+}
+
+static int ftgpio_gpio_set_irq_type(struct irq_data *d, unsigned int type)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct ftgpio_gpio *g = gpiochip_get_data(gc);
+	u32 mask = BIT(irqd_to_hwirq(d));
+	u32 reg_both, reg_level, reg_type;
+
+	reg_type = readl(g->base + GPIO_INT_TYPE);
+	reg_level = readl(g->base + GPIO_INT_LEVEL);
+	reg_both = readl(g->base + GPIO_INT_BOTH_EDGE);
+
+	switch (type) {
+	case IRQ_TYPE_EDGE_BOTH:
+		irq_set_handler_locked(d, handle_edge_irq);
+		reg_type &= ~mask;
+		reg_both |= mask;
+		break;
+	case IRQ_TYPE_EDGE_RISING:
+		irq_set_handler_locked(d, handle_edge_irq);
+		reg_type &= ~mask;
+		reg_both &= ~mask;
+		reg_level &= ~mask;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		irq_set_handler_locked(d, handle_edge_irq);
+		reg_type &= ~mask;
+		reg_both &= ~mask;
+		reg_level |= mask;
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		irq_set_handler_locked(d, handle_level_irq);
+		reg_type |= mask;
+		reg_level &= ~mask;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		irq_set_handler_locked(d, handle_level_irq);
+		reg_type |= mask;
+		reg_level |= mask;
+		break;
+	default:
+		irq_set_handler_locked(d, handle_bad_irq);
+		return -EINVAL;
+	}
+
+	writel(reg_type, g->base + GPIO_INT_TYPE);
+	writel(reg_level, g->base + GPIO_INT_LEVEL);
+	writel(reg_both, g->base + GPIO_INT_BOTH_EDGE);
+
+	ftgpio_gpio_ack_irq(d);
+
+	return 0;
+}
+
+static void ftgpio_gpio_irq_handler(struct irq_desc *desc)
+{
+	struct gpio_chip *gc = irq_desc_get_handler_data(desc);
+	struct ftgpio_gpio *g = gpiochip_get_data(gc);
+	struct irq_chip *irqchip = irq_desc_get_chip(desc);
+	int offset;
+	unsigned long stat;
+
+	chained_irq_enter(irqchip, desc);
+
+	stat = readl(g->base + GPIO_INT_STAT_RAW);
+	if (stat)
+		for_each_set_bit(offset, &stat, gc->ngpio)
+			generic_handle_irq(irq_find_mapping(gc->irq.domain,
+							    offset));
+
+	chained_irq_exit(irqchip, desc);
+}
+
+static int ftgpio_gpio_set_config(struct gpio_chip *gc, unsigned int offset,
+				  unsigned long config)
+{
+	enum pin_config_param param = pinconf_to_config_param(config);
+	u32 arg = pinconf_to_config_argument(config);
+	struct ftgpio_gpio *g = gpiochip_get_data(gc);
+	unsigned long pclk_freq;
+	u32 deb_div;
+	u32 val;
+
+	if (param != PIN_CONFIG_INPUT_DEBOUNCE)
+		return -ENOTSUPP;
+
+	/*
+	 * Debounce only works if interrupts are enabled. The manual
+	 * states that if PCLK is 66 MHz, and this is set to 0x7D0, then
+	 * PCLK is divided down to 33 kHz for the debounce timer. 0x7D0 is
+	 * 2000 decimal, so what they mean is simply that the PCLK is
+	 * divided by this value.
+	 *
+	 * As we get a debounce setting in microseconds, we calculate the
+	 * desired period time and see if we can get a suitable debounce
+	 * time.
+	 */
+	pclk_freq = clk_get_rate(g->clk);
+	deb_div = DIV_ROUND_CLOSEST(pclk_freq, arg);
+
+	/* This register is only 24 bits wide */
+	if (deb_div > (1 << 24))
+		return -ENOTSUPP;
+
+	dev_dbg(g->dev, "prescale divisor: %08x, resulting frequency %lu Hz\n",
+		deb_div, (pclk_freq/deb_div));
+
+	val = readl(g->base + GPIO_DEBOUNCE_PRESCALE);
+	if (val == deb_div) {
+		/*
+		 * The debounce timer happens to already be set to the
+		 * desirable value, what a coincidence! We can just enable
+		 * debounce on this GPIO line and return. This happens more
+		 * often than you think, for example when all GPIO keys
+		 * on a system are requesting the same debounce interval.
+		 */
+		val = readl(g->base + GPIO_DEBOUNCE_EN);
+		val |= BIT(offset);
+		writel(val, g->base + GPIO_DEBOUNCE_EN);
+		return 0;
+	}
+
+	val = readl(g->base + GPIO_DEBOUNCE_EN);
+	if (val) {
+		/*
+		 * Oh no! Someone is already using the debounce with
+		 * another setting than what we need. Bummer.
+		 */
+		return -ENOTSUPP;
+	}
+
+	/* First come, first serve */
+	writel(deb_div, g->base + GPIO_DEBOUNCE_PRESCALE);
+	/* Enable debounce */
+	val |= BIT(offset);
+	writel(val, g->base + GPIO_DEBOUNCE_EN);
+
+	return 0;
+}
+
+static int ftgpio_gpio_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct ftgpio_gpio *g;
+	struct gpio_irq_chip *girq;
+	int irq;
+	int ret;
+
+	g = devm_kzalloc(dev, sizeof(*g), GFP_KERNEL);
+	if (!g)
+		return -ENOMEM;
+
+	g->dev = dev;
+
+	g->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(g->base))
+		return PTR_ERR(g->base);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq <= 0)
+		return irq ? irq : -EINVAL;
+
+	g->clk = devm_clk_get(dev, NULL);
+	if (!IS_ERR(g->clk)) {
+		ret = clk_prepare_enable(g->clk);
+		if (ret)
+			return ret;
+	} else if (PTR_ERR(g->clk) == -EPROBE_DEFER) {
+		/*
+		 * Percolate deferrals, for anything else,
+		 * just live without the clocking.
+		 */
+		return PTR_ERR(g->clk);
+	}
+
+	ret = bgpio_init(&g->gc, dev, 4,
+			 g->base + GPIO_DATA_IN,
+			 g->base + GPIO_DATA_SET,
+			 g->base + GPIO_DATA_CLR,
+			 g->base + GPIO_DIR,
+			 NULL,
+			 0);
+	if (ret) {
+		dev_err(dev, "unable to init generic GPIO\n");
+		goto dis_clk;
+	}
+	g->gc.label = "FTGPIO010";
+	g->gc.base = -1;
+	g->gc.parent = dev;
+	g->gc.owner = THIS_MODULE;
+	/* ngpio is set by bgpio_init() */
+
+	/* We need a silicon clock to do debounce */
+	if (!IS_ERR(g->clk))
+		g->gc.set_config = ftgpio_gpio_set_config;
+
+	g->irq.name = "FTGPIO010";
+	g->irq.irq_ack = ftgpio_gpio_ack_irq;
+	g->irq.irq_mask = ftgpio_gpio_mask_irq;
+	g->irq.irq_unmask = ftgpio_gpio_unmask_irq;
+	g->irq.irq_set_type = ftgpio_gpio_set_irq_type;
+
+	girq = &g->gc.irq;
+	girq->chip = &g->irq;
+	girq->parent_handler = ftgpio_gpio_irq_handler;
+	girq->num_parents = 1;
+	girq->parents = devm_kcalloc(dev, 1, sizeof(*girq->parents),
+				     GFP_KERNEL);
+	if (!girq->parents) {
+		ret = -ENOMEM;
+		goto dis_clk;
+	}
+	girq->default_type = IRQ_TYPE_NONE;
+	girq->handler = handle_bad_irq;
+	girq->parents[0] = irq;
+
+	/* Disable, unmask and clear all interrupts */
+	writel(0x0, g->base + GPIO_INT_EN);
+	writel(0x0, g->base + GPIO_INT_MASK);
+	writel(~0x0, g->base + GPIO_INT_CLR);
+
+	/* Clear any use of debounce */
+	writel(0x0, g->base + GPIO_DEBOUNCE_EN);
+
+	ret = devm_gpiochip_add_data(dev, &g->gc, g);
+	if (ret)
+		goto dis_clk;
+
+	platform_set_drvdata(pdev, g);
+	dev_info(dev, "FTGPIO010 @%p registered\n", g->base);
+
+	return 0;
+
+dis_clk:
+	if (!IS_ERR(g->clk))
+		clk_disable_unprepare(g->clk);
+	return ret;
+}
+
+static int ftgpio_gpio_remove(struct platform_device *pdev)
+{
+	struct ftgpio_gpio *g = platform_get_drvdata(pdev);
+
+	if (!IS_ERR(g->clk))
+		clk_disable_unprepare(g->clk);
+	return 0;
+}
+
+static const struct of_device_id ftgpio_gpio_of_match[] = {
+	{
+		.compatible = "cortina,gemini-gpio",
+	},
+	{
+		.compatible = "moxa,moxart-gpio",
+	},
+	{
+		.compatible = "faraday,ftgpio010",
+	},
+	{},
+};
+
+static struct platform_driver ftgpio_gpio_driver = {
+	.driver = {
+		.name		= "ftgpio010-gpio",
+		.of_match_table = of_match_ptr(ftgpio_gpio_of_match),
+	},
+	.probe = ftgpio_gpio_probe,
+	.remove = ftgpio_gpio_remove,
+};
+builtin_platform_driver(ftgpio_gpio_driver);
diff --git a/drivers/gpio/gpio-ge.c b/drivers/gpio/gpio-ge.c
new file mode 100644
index 000000000..636952769
--- /dev/null
+++ b/drivers/gpio/gpio-ge.c
@@ -0,0 +1,109 @@
+/*
+ * Driver for GE FPGA based GPIO
+ *
+ * Author: Martyn Welch <martyn.welch@ge.com>
+ *
+ * 2008 (c) GE Intelligent Platforms Embedded Systems, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/* TODO
+ *
+ * Configuration of output modes (totem-pole/open-drain)
+ * Interrupt configuration - interrupts are always generated the FPGA relies on
+ * the I/O interrupt controllers mask to stop them propergating
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/of_device.h>
+#include <linux/of_address.h>
+#include <linux/module.h>
+#include <linux/gpio/driver.h>
+
+#define GEF_GPIO_DIRECT		0x00
+#define GEF_GPIO_IN		0x04
+#define GEF_GPIO_OUT		0x08
+#define GEF_GPIO_TRIG		0x0C
+#define GEF_GPIO_POLAR_A	0x10
+#define GEF_GPIO_POLAR_B	0x14
+#define GEF_GPIO_INT_STAT	0x18
+#define GEF_GPIO_OVERRUN	0x1C
+#define GEF_GPIO_MODE		0x20
+
+static const struct of_device_id gef_gpio_ids[] = {
+	{
+		.compatible	= "gef,sbc610-gpio",
+		.data		= (void *)19,
+	}, {
+		.compatible	= "gef,sbc310-gpio",
+		.data		= (void *)6,
+	}, {
+		.compatible	= "ge,imp3a-gpio",
+		.data		= (void *)16,
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, gef_gpio_ids);
+
+static int __init gef_gpio_probe(struct platform_device *pdev)
+{
+	struct gpio_chip *gc;
+	void __iomem *regs;
+	int ret;
+
+	gc = devm_kzalloc(&pdev->dev, sizeof(*gc), GFP_KERNEL);
+	if (!gc)
+		return -ENOMEM;
+
+	regs = of_iomap(pdev->dev.of_node, 0);
+	if (!regs)
+		return -ENOMEM;
+
+	ret = bgpio_init(gc, &pdev->dev, 4, regs + GEF_GPIO_IN,
+			 regs + GEF_GPIO_OUT, NULL, NULL,
+			 regs + GEF_GPIO_DIRECT, BGPIOF_BIG_ENDIAN_BYTE_ORDER);
+	if (ret) {
+		dev_err(&pdev->dev, "bgpio_init failed\n");
+		goto err0;
+	}
+
+	/* Setup pointers to chip functions */
+	gc->label = devm_kasprintf(&pdev->dev, GFP_KERNEL, "%pOF", pdev->dev.of_node);
+	if (!gc->label) {
+		ret = -ENOMEM;
+		goto err0;
+	}
+
+	gc->base = -1;
+	gc->ngpio = (u16)(uintptr_t)of_device_get_match_data(&pdev->dev);
+	gc->of_gpio_n_cells = 2;
+	gc->of_node = pdev->dev.of_node;
+
+	/* This function adds a memory mapped GPIO chip */
+	ret = devm_gpiochip_add_data(&pdev->dev, gc, NULL);
+	if (ret)
+		goto err0;
+
+	return 0;
+err0:
+	iounmap(regs);
+	pr_err("%pOF: GPIO chip registration failed\n", pdev->dev.of_node);
+	return ret;
+};
+
+static struct platform_driver gef_gpio_driver = {
+	.driver = {
+		.name		= "gef-gpio",
+		.of_match_table	= gef_gpio_ids,
+	},
+};
+module_platform_driver_probe(gef_gpio_driver, gef_gpio_probe);
+
+MODULE_DESCRIPTION("GE I/O FPGA GPIO driver");
+MODULE_AUTHOR("Martyn Welch <martyn.welch@ge.com");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/gpio-gpio-mm.c b/drivers/gpio/gpio-gpio-mm.c
new file mode 100644
index 000000000..b89b8c5ff
--- /dev/null
+++ b/drivers/gpio/gpio-gpio-mm.c
@@ -0,0 +1,318 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * GPIO driver for the Diamond Systems GPIO-MM
+ * Copyright (C) 2016 William Breathitt Gray
+ *
+ * This driver supports the following Diamond Systems devices: GPIO-MM and
+ * GPIO-MM-12.
+ */
+#include <linux/bitmap.h>
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/gpio/driver.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/isa.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/spinlock.h>
+
+#define GPIOMM_EXTENT 8
+#define MAX_NUM_GPIOMM max_num_isa_dev(GPIOMM_EXTENT)
+
+static unsigned int base[MAX_NUM_GPIOMM];
+static unsigned int num_gpiomm;
+module_param_hw_array(base, uint, ioport, &num_gpiomm, 0);
+MODULE_PARM_DESC(base, "Diamond Systems GPIO-MM base addresses");
+
+/**
+ * struct gpiomm_gpio - GPIO device private data structure
+ * @chip:	instance of the gpio_chip
+ * @io_state:	bit I/O state (whether bit is set to input or output)
+ * @out_state:	output bits state
+ * @control:	Control registers state
+ * @lock:	synchronization lock to prevent I/O race conditions
+ * @base:	base port address of the GPIO device
+ */
+struct gpiomm_gpio {
+	struct gpio_chip chip;
+	unsigned char io_state[6];
+	unsigned char out_state[6];
+	unsigned char control[2];
+	spinlock_t lock;
+	unsigned int base;
+};
+
+static int gpiomm_gpio_get_direction(struct gpio_chip *chip,
+	unsigned int offset)
+{
+	struct gpiomm_gpio *const gpiommgpio = gpiochip_get_data(chip);
+	const unsigned int port = offset / 8;
+	const unsigned int mask = BIT(offset % 8);
+
+	if (gpiommgpio->io_state[port] & mask)
+		return GPIO_LINE_DIRECTION_IN;
+
+	return GPIO_LINE_DIRECTION_OUT;
+}
+
+static int gpiomm_gpio_direction_input(struct gpio_chip *chip,
+	unsigned int offset)
+{
+	struct gpiomm_gpio *const gpiommgpio = gpiochip_get_data(chip);
+	const unsigned int io_port = offset / 8;
+	const unsigned int control_port = io_port / 3;
+	const unsigned int control_addr = gpiommgpio->base + 3 + control_port*4;
+	unsigned long flags;
+	unsigned int control;
+
+	spin_lock_irqsave(&gpiommgpio->lock, flags);
+
+	/* Check if configuring Port C */
+	if (io_port == 2 || io_port == 5) {
+		/* Port C can be configured by nibble */
+		if (offset % 8 > 3) {
+			gpiommgpio->io_state[io_port] |= 0xF0;
+			gpiommgpio->control[control_port] |= BIT(3);
+		} else {
+			gpiommgpio->io_state[io_port] |= 0x0F;
+			gpiommgpio->control[control_port] |= BIT(0);
+		}
+	} else {
+		gpiommgpio->io_state[io_port] |= 0xFF;
+		if (io_port == 0 || io_port == 3)
+			gpiommgpio->control[control_port] |= BIT(4);
+		else
+			gpiommgpio->control[control_port] |= BIT(1);
+	}
+
+	control = BIT(7) | gpiommgpio->control[control_port];
+	outb(control, control_addr);
+
+	spin_unlock_irqrestore(&gpiommgpio->lock, flags);
+
+	return 0;
+}
+
+static int gpiomm_gpio_direction_output(struct gpio_chip *chip,
+	unsigned int offset, int value)
+{
+	struct gpiomm_gpio *const gpiommgpio = gpiochip_get_data(chip);
+	const unsigned int io_port = offset / 8;
+	const unsigned int control_port = io_port / 3;
+	const unsigned int mask = BIT(offset % 8);
+	const unsigned int control_addr = gpiommgpio->base + 3 + control_port*4;
+	const unsigned int out_port = (io_port > 2) ? io_port + 1 : io_port;
+	unsigned long flags;
+	unsigned int control;
+
+	spin_lock_irqsave(&gpiommgpio->lock, flags);
+
+	/* Check if configuring Port C */
+	if (io_port == 2 || io_port == 5) {
+		/* Port C can be configured by nibble */
+		if (offset % 8 > 3) {
+			gpiommgpio->io_state[io_port] &= 0x0F;
+			gpiommgpio->control[control_port] &= ~BIT(3);
+		} else {
+			gpiommgpio->io_state[io_port] &= 0xF0;
+			gpiommgpio->control[control_port] &= ~BIT(0);
+		}
+	} else {
+		gpiommgpio->io_state[io_port] &= 0x00;
+		if (io_port == 0 || io_port == 3)
+			gpiommgpio->control[control_port] &= ~BIT(4);
+		else
+			gpiommgpio->control[control_port] &= ~BIT(1);
+	}
+
+	if (value)
+		gpiommgpio->out_state[io_port] |= mask;
+	else
+		gpiommgpio->out_state[io_port] &= ~mask;
+
+	control = BIT(7) | gpiommgpio->control[control_port];
+	outb(control, control_addr);
+
+	outb(gpiommgpio->out_state[io_port], gpiommgpio->base + out_port);
+
+	spin_unlock_irqrestore(&gpiommgpio->lock, flags);
+
+	return 0;
+}
+
+static int gpiomm_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+	struct gpiomm_gpio *const gpiommgpio = gpiochip_get_data(chip);
+	const unsigned int port = offset / 8;
+	const unsigned int mask = BIT(offset % 8);
+	const unsigned int in_port = (port > 2) ? port + 1 : port;
+	unsigned long flags;
+	unsigned int port_state;
+
+	spin_lock_irqsave(&gpiommgpio->lock, flags);
+
+	/* ensure that GPIO is set for input */
+	if (!(gpiommgpio->io_state[port] & mask)) {
+		spin_unlock_irqrestore(&gpiommgpio->lock, flags);
+		return -EINVAL;
+	}
+
+	port_state = inb(gpiommgpio->base + in_port);
+
+	spin_unlock_irqrestore(&gpiommgpio->lock, flags);
+
+	return !!(port_state & mask);
+}
+
+static const size_t ports[] = { 0, 1, 2, 4, 5, 6 };
+
+static int gpiomm_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask,
+	unsigned long *bits)
+{
+	struct gpiomm_gpio *const gpiommgpio = gpiochip_get_data(chip);
+	unsigned long offset;
+	unsigned long gpio_mask;
+	unsigned int port_addr;
+	unsigned long port_state;
+
+	/* clear bits array to a clean slate */
+	bitmap_zero(bits, chip->ngpio);
+
+	for_each_set_clump8(offset, gpio_mask, mask, ARRAY_SIZE(ports) * 8) {
+		port_addr = gpiommgpio->base + ports[offset / 8];
+		port_state = inb(port_addr) & gpio_mask;
+
+		bitmap_set_value8(bits, port_state, offset);
+	}
+
+	return 0;
+}
+
+static void gpiomm_gpio_set(struct gpio_chip *chip, unsigned int offset,
+	int value)
+{
+	struct gpiomm_gpio *const gpiommgpio = gpiochip_get_data(chip);
+	const unsigned int port = offset / 8;
+	const unsigned int mask = BIT(offset % 8);
+	const unsigned int out_port = (port > 2) ? port + 1 : port;
+	unsigned long flags;
+
+	spin_lock_irqsave(&gpiommgpio->lock, flags);
+
+	if (value)
+		gpiommgpio->out_state[port] |= mask;
+	else
+		gpiommgpio->out_state[port] &= ~mask;
+
+	outb(gpiommgpio->out_state[port], gpiommgpio->base + out_port);
+
+	spin_unlock_irqrestore(&gpiommgpio->lock, flags);
+}
+
+static void gpiomm_gpio_set_multiple(struct gpio_chip *chip,
+	unsigned long *mask, unsigned long *bits)
+{
+	struct gpiomm_gpio *const gpiommgpio = gpiochip_get_data(chip);
+	unsigned long offset;
+	unsigned long gpio_mask;
+	size_t index;
+	unsigned int port_addr;
+	unsigned long bitmask;
+	unsigned long flags;
+
+	for_each_set_clump8(offset, gpio_mask, mask, ARRAY_SIZE(ports) * 8) {
+		index = offset / 8;
+		port_addr = gpiommgpio->base + ports[index];
+
+		bitmask = bitmap_get_value8(bits, offset) & gpio_mask;
+
+		spin_lock_irqsave(&gpiommgpio->lock, flags);
+
+		/* update output state data and set device gpio register */
+		gpiommgpio->out_state[index] &= ~gpio_mask;
+		gpiommgpio->out_state[index] |= bitmask;
+		outb(gpiommgpio->out_state[index], port_addr);
+
+		spin_unlock_irqrestore(&gpiommgpio->lock, flags);
+	}
+}
+
+#define GPIOMM_NGPIO 48
+static const char *gpiomm_names[GPIOMM_NGPIO] = {
+	"Port 1A0", "Port 1A1", "Port 1A2", "Port 1A3", "Port 1A4", "Port 1A5",
+	"Port 1A6", "Port 1A7", "Port 1B0", "Port 1B1", "Port 1B2", "Port 1B3",
+	"Port 1B4", "Port 1B5", "Port 1B6", "Port 1B7", "Port 1C0", "Port 1C1",
+	"Port 1C2", "Port 1C3", "Port 1C4", "Port 1C5", "Port 1C6", "Port 1C7",
+	"Port 2A0", "Port 2A1", "Port 2A2", "Port 2A3", "Port 2A4", "Port 2A5",
+	"Port 2A6", "Port 2A7", "Port 2B0", "Port 2B1", "Port 2B2", "Port 2B3",
+	"Port 2B4", "Port 2B5", "Port 2B6", "Port 2B7", "Port 2C0", "Port 2C1",
+	"Port 2C2", "Port 2C3", "Port 2C4", "Port 2C5", "Port 2C6", "Port 2C7",
+};
+
+static int gpiomm_probe(struct device *dev, unsigned int id)
+{
+	struct gpiomm_gpio *gpiommgpio;
+	const char *const name = dev_name(dev);
+	int err;
+
+	gpiommgpio = devm_kzalloc(dev, sizeof(*gpiommgpio), GFP_KERNEL);
+	if (!gpiommgpio)
+		return -ENOMEM;
+
+	if (!devm_request_region(dev, base[id], GPIOMM_EXTENT, name)) {
+		dev_err(dev, "Unable to lock port addresses (0x%X-0x%X)\n",
+			base[id], base[id] + GPIOMM_EXTENT);
+		return -EBUSY;
+	}
+
+	gpiommgpio->chip.label = name;
+	gpiommgpio->chip.parent = dev;
+	gpiommgpio->chip.owner = THIS_MODULE;
+	gpiommgpio->chip.base = -1;
+	gpiommgpio->chip.ngpio = GPIOMM_NGPIO;
+	gpiommgpio->chip.names = gpiomm_names;
+	gpiommgpio->chip.get_direction = gpiomm_gpio_get_direction;
+	gpiommgpio->chip.direction_input = gpiomm_gpio_direction_input;
+	gpiommgpio->chip.direction_output = gpiomm_gpio_direction_output;
+	gpiommgpio->chip.get = gpiomm_gpio_get;
+	gpiommgpio->chip.get_multiple = gpiomm_gpio_get_multiple;
+	gpiommgpio->chip.set = gpiomm_gpio_set;
+	gpiommgpio->chip.set_multiple = gpiomm_gpio_set_multiple;
+	gpiommgpio->base = base[id];
+
+	spin_lock_init(&gpiommgpio->lock);
+
+	err = devm_gpiochip_add_data(dev, &gpiommgpio->chip, gpiommgpio);
+	if (err) {
+		dev_err(dev, "GPIO registering failed (%d)\n", err);
+		return err;
+	}
+
+	/* initialize all GPIO as output */
+	outb(0x80, base[id] + 3);
+	outb(0x00, base[id]);
+	outb(0x00, base[id] + 1);
+	outb(0x00, base[id] + 2);
+	outb(0x80, base[id] + 7);
+	outb(0x00, base[id] + 4);
+	outb(0x00, base[id] + 5);
+	outb(0x00, base[id] + 6);
+
+	return 0;
+}
+
+static struct isa_driver gpiomm_driver = {
+	.probe = gpiomm_probe,
+	.driver = {
+		.name = "gpio-mm"
+	},
+};
+
+module_isa_driver(gpiomm_driver, num_gpiomm);
+
+MODULE_AUTHOR("William Breathitt Gray <vilhelm.gray@gmail.com>");
+MODULE_DESCRIPTION("Diamond Systems GPIO-MM GPIO driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-grgpio.c b/drivers/gpio/gpio-grgpio.c
new file mode 100644
index 000000000..f954359c9
--- /dev/null
+++ b/drivers/gpio/gpio-grgpio.c
@@ -0,0 +1,479 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Driver for Aeroflex Gaisler GRGPIO General Purpose I/O cores.
+ *
+ * 2013 (c) Aeroflex Gaisler AB
+ *
+ * This driver supports the GRGPIO GPIO core available in the GRLIB VHDL
+ * IP core library.
+ *
+ * Full documentation of the GRGPIO core can be found here:
+ * http://www.gaisler.com/products/grlib/grip.pdf
+ *
+ * See "Documentation/devicetree/bindings/gpio/gpio-grgpio.txt" for
+ * information on open firmware properties.
+ *
+ * Contributors: Andreas Larsson <andreas@gaisler.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/gpio/driver.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/bitops.h>
+
+#define GRGPIO_MAX_NGPIO 32
+
+#define GRGPIO_DATA		0x00
+#define GRGPIO_OUTPUT		0x04
+#define GRGPIO_DIR		0x08
+#define GRGPIO_IMASK		0x0c
+#define GRGPIO_IPOL		0x10
+#define GRGPIO_IEDGE		0x14
+#define GRGPIO_BYPASS		0x18
+#define GRGPIO_IMAP_BASE	0x20
+
+/* Structure for an irq of the core - called an underlying irq */
+struct grgpio_uirq {
+	u8 refcnt; /* Reference counter to manage requesting/freeing of uirq */
+	u8 uirq; /* Underlying irq of the gpio driver */
+};
+
+/*
+ * Structure for an irq of a gpio line handed out by this driver. The index is
+ * used to map to the corresponding underlying irq.
+ */
+struct grgpio_lirq {
+	s8 index; /* Index into struct grgpio_priv's uirqs, or -1 */
+	u8 irq; /* irq for the gpio line */
+};
+
+struct grgpio_priv {
+	struct gpio_chip gc;
+	void __iomem *regs;
+	struct device *dev;
+
+	u32 imask; /* irq mask shadow register */
+
+	/*
+	 * The grgpio core can have multiple "underlying" irqs. The gpio lines
+	 * can be mapped to any one or none of these underlying irqs
+	 * independently of each other. This driver sets up an irq domain and
+	 * hands out separate irqs to each gpio line
+	 */
+	struct irq_domain *domain;
+
+	/*
+	 * This array contains information on each underlying irq, each
+	 * irq of the grgpio core itself.
+	 */
+	struct grgpio_uirq uirqs[GRGPIO_MAX_NGPIO];
+
+	/*
+	 * This array contains information for each gpio line on the irqs
+	 * obtains from this driver. An index value of -1 for a certain gpio
+	 * line indicates that the line has no irq. Otherwise the index connects
+	 * the irq to the underlying irq by pointing into the uirqs array.
+	 */
+	struct grgpio_lirq lirqs[GRGPIO_MAX_NGPIO];
+};
+
+static void grgpio_set_imask(struct grgpio_priv *priv, unsigned int offset,
+			     int val)
+{
+	struct gpio_chip *gc = &priv->gc;
+
+	if (val)
+		priv->imask |= BIT(offset);
+	else
+		priv->imask &= ~BIT(offset);
+	gc->write_reg(priv->regs + GRGPIO_IMASK, priv->imask);
+}
+
+static int grgpio_to_irq(struct gpio_chip *gc, unsigned offset)
+{
+	struct grgpio_priv *priv = gpiochip_get_data(gc);
+
+	if (offset >= gc->ngpio)
+		return -ENXIO;
+
+	if (priv->lirqs[offset].index < 0)
+		return -ENXIO;
+
+	return irq_create_mapping(priv->domain, offset);
+}
+
+/* -------------------- IRQ chip functions -------------------- */
+
+static int grgpio_irq_set_type(struct irq_data *d, unsigned int type)
+{
+	struct grgpio_priv *priv = irq_data_get_irq_chip_data(d);
+	unsigned long flags;
+	u32 mask = BIT(d->hwirq);
+	u32 ipol;
+	u32 iedge;
+	u32 pol;
+	u32 edge;
+
+	switch (type) {
+	case IRQ_TYPE_LEVEL_LOW:
+		pol = 0;
+		edge = 0;
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		pol = mask;
+		edge = 0;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		pol = 0;
+		edge = mask;
+		break;
+	case IRQ_TYPE_EDGE_RISING:
+		pol = mask;
+		edge = mask;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&priv->gc.bgpio_lock, flags);
+
+	ipol = priv->gc.read_reg(priv->regs + GRGPIO_IPOL) & ~mask;
+	iedge = priv->gc.read_reg(priv->regs + GRGPIO_IEDGE) & ~mask;
+
+	priv->gc.write_reg(priv->regs + GRGPIO_IPOL, ipol | pol);
+	priv->gc.write_reg(priv->regs + GRGPIO_IEDGE, iedge | edge);
+
+	spin_unlock_irqrestore(&priv->gc.bgpio_lock, flags);
+
+	return 0;
+}
+
+static void grgpio_irq_mask(struct irq_data *d)
+{
+	struct grgpio_priv *priv = irq_data_get_irq_chip_data(d);
+	int offset = d->hwirq;
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->gc.bgpio_lock, flags);
+
+	grgpio_set_imask(priv, offset, 0);
+
+	spin_unlock_irqrestore(&priv->gc.bgpio_lock, flags);
+}
+
+static void grgpio_irq_unmask(struct irq_data *d)
+{
+	struct grgpio_priv *priv = irq_data_get_irq_chip_data(d);
+	int offset = d->hwirq;
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->gc.bgpio_lock, flags);
+
+	grgpio_set_imask(priv, offset, 1);
+
+	spin_unlock_irqrestore(&priv->gc.bgpio_lock, flags);
+}
+
+static struct irq_chip grgpio_irq_chip = {
+	.name			= "grgpio",
+	.irq_mask		= grgpio_irq_mask,
+	.irq_unmask		= grgpio_irq_unmask,
+	.irq_set_type		= grgpio_irq_set_type,
+};
+
+static irqreturn_t grgpio_irq_handler(int irq, void *dev)
+{
+	struct grgpio_priv *priv = dev;
+	int ngpio = priv->gc.ngpio;
+	unsigned long flags;
+	int i;
+	int match = 0;
+
+	spin_lock_irqsave(&priv->gc.bgpio_lock, flags);
+
+	/*
+	 * For each gpio line, call its interrupt handler if it its underlying
+	 * irq matches the current irq that is handled.
+	 */
+	for (i = 0; i < ngpio; i++) {
+		struct grgpio_lirq *lirq = &priv->lirqs[i];
+
+		if (priv->imask & BIT(i) && lirq->index >= 0 &&
+		    priv->uirqs[lirq->index].uirq == irq) {
+			generic_handle_irq(lirq->irq);
+			match = 1;
+		}
+	}
+
+	spin_unlock_irqrestore(&priv->gc.bgpio_lock, flags);
+
+	if (!match)
+		dev_warn(priv->dev, "No gpio line matched irq %d\n", irq);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * This function will be called as a consequence of the call to
+ * irq_create_mapping in grgpio_to_irq
+ */
+static int grgpio_irq_map(struct irq_domain *d, unsigned int irq,
+			  irq_hw_number_t hwirq)
+{
+	struct grgpio_priv *priv = d->host_data;
+	struct grgpio_lirq *lirq;
+	struct grgpio_uirq *uirq;
+	unsigned long flags;
+	int offset = hwirq;
+	int ret = 0;
+
+	if (!priv)
+		return -EINVAL;
+
+	lirq = &priv->lirqs[offset];
+	if (lirq->index < 0)
+		return -EINVAL;
+
+	dev_dbg(priv->dev, "Mapping irq %d for gpio line %d\n",
+		irq, offset);
+
+	spin_lock_irqsave(&priv->gc.bgpio_lock, flags);
+
+	/* Request underlying irq if not already requested */
+	lirq->irq = irq;
+	uirq = &priv->uirqs[lirq->index];
+	if (uirq->refcnt == 0) {
+		spin_unlock_irqrestore(&priv->gc.bgpio_lock, flags);
+		ret = request_irq(uirq->uirq, grgpio_irq_handler, 0,
+				  dev_name(priv->dev), priv);
+		if (ret) {
+			dev_err(priv->dev,
+				"Could not request underlying irq %d\n",
+				uirq->uirq);
+			return ret;
+		}
+		spin_lock_irqsave(&priv->gc.bgpio_lock, flags);
+	}
+	uirq->refcnt++;
+
+	spin_unlock_irqrestore(&priv->gc.bgpio_lock, flags);
+
+	/* Setup irq  */
+	irq_set_chip_data(irq, priv);
+	irq_set_chip_and_handler(irq, &grgpio_irq_chip,
+				 handle_simple_irq);
+	irq_set_noprobe(irq);
+
+	return ret;
+}
+
+static void grgpio_irq_unmap(struct irq_domain *d, unsigned int irq)
+{
+	struct grgpio_priv *priv = d->host_data;
+	int index;
+	struct grgpio_lirq *lirq;
+	struct grgpio_uirq *uirq;
+	unsigned long flags;
+	int ngpio = priv->gc.ngpio;
+	int i;
+
+	irq_set_chip_and_handler(irq, NULL, NULL);
+	irq_set_chip_data(irq, NULL);
+
+	spin_lock_irqsave(&priv->gc.bgpio_lock, flags);
+
+	/* Free underlying irq if last user unmapped */
+	index = -1;
+	for (i = 0; i < ngpio; i++) {
+		lirq = &priv->lirqs[i];
+		if (lirq->irq == irq) {
+			grgpio_set_imask(priv, i, 0);
+			lirq->irq = 0;
+			index = lirq->index;
+			break;
+		}
+	}
+	WARN_ON(index < 0);
+
+	if (index >= 0) {
+		uirq = &priv->uirqs[lirq->index];
+		uirq->refcnt--;
+		if (uirq->refcnt == 0) {
+			spin_unlock_irqrestore(&priv->gc.bgpio_lock, flags);
+			free_irq(uirq->uirq, priv);
+			return;
+		}
+	}
+
+	spin_unlock_irqrestore(&priv->gc.bgpio_lock, flags);
+}
+
+static const struct irq_domain_ops grgpio_irq_domain_ops = {
+	.map	= grgpio_irq_map,
+	.unmap	= grgpio_irq_unmap,
+};
+
+/* ------------------------------------------------------------ */
+
+static int grgpio_probe(struct platform_device *ofdev)
+{
+	struct device_node *np = ofdev->dev.of_node;
+	void  __iomem *regs;
+	struct gpio_chip *gc;
+	struct grgpio_priv *priv;
+	int err;
+	u32 prop;
+	s32 *irqmap;
+	int size;
+	int i;
+
+	priv = devm_kzalloc(&ofdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	regs = devm_platform_ioremap_resource(ofdev, 0);
+	if (IS_ERR(regs))
+		return PTR_ERR(regs);
+
+	gc = &priv->gc;
+	err = bgpio_init(gc, &ofdev->dev, 4, regs + GRGPIO_DATA,
+			 regs + GRGPIO_OUTPUT, NULL, regs + GRGPIO_DIR, NULL,
+			 BGPIOF_BIG_ENDIAN_BYTE_ORDER);
+	if (err) {
+		dev_err(&ofdev->dev, "bgpio_init() failed\n");
+		return err;
+	}
+
+	priv->regs = regs;
+	priv->imask = gc->read_reg(regs + GRGPIO_IMASK);
+	priv->dev = &ofdev->dev;
+
+	gc->of_node = np;
+	gc->owner = THIS_MODULE;
+	gc->to_irq = grgpio_to_irq;
+	gc->label = devm_kasprintf(&ofdev->dev, GFP_KERNEL, "%pOF", np);
+	gc->base = -1;
+
+	err = of_property_read_u32(np, "nbits", &prop);
+	if (err || prop <= 0 || prop > GRGPIO_MAX_NGPIO) {
+		gc->ngpio = GRGPIO_MAX_NGPIO;
+		dev_dbg(&ofdev->dev,
+			"No or invalid nbits property: assume %d\n", gc->ngpio);
+	} else {
+		gc->ngpio = prop;
+	}
+
+	/*
+	 * The irqmap contains the index values indicating which underlying irq,
+	 * if anyone, is connected to that line
+	 */
+	irqmap = (s32 *)of_get_property(np, "irqmap", &size);
+	if (irqmap) {
+		if (size < gc->ngpio) {
+			dev_err(&ofdev->dev,
+				"irqmap shorter than ngpio (%d < %d)\n",
+				size, gc->ngpio);
+			return -EINVAL;
+		}
+
+		priv->domain = irq_domain_add_linear(np, gc->ngpio,
+						     &grgpio_irq_domain_ops,
+						     priv);
+		if (!priv->domain) {
+			dev_err(&ofdev->dev, "Could not add irq domain\n");
+			return -EINVAL;
+		}
+
+		for (i = 0; i < gc->ngpio; i++) {
+			struct grgpio_lirq *lirq;
+			int ret;
+
+			lirq = &priv->lirqs[i];
+			lirq->index = irqmap[i];
+
+			if (lirq->index < 0)
+				continue;
+
+			ret = platform_get_irq(ofdev, lirq->index);
+			if (ret <= 0) {
+				/*
+				 * Continue without irq functionality for that
+				 * gpio line
+				 */
+				continue;
+			}
+			priv->uirqs[lirq->index].uirq = ret;
+		}
+	}
+
+	platform_set_drvdata(ofdev, priv);
+
+	err = gpiochip_add_data(gc, priv);
+	if (err) {
+		dev_err(&ofdev->dev, "Could not add gpiochip\n");
+		if (priv->domain)
+			irq_domain_remove(priv->domain);
+		return err;
+	}
+
+	dev_info(&ofdev->dev, "regs=0x%p, base=%d, ngpio=%d, irqs=%s\n",
+		 priv->regs, gc->base, gc->ngpio, priv->domain ? "on" : "off");
+
+	return 0;
+}
+
+static int grgpio_remove(struct platform_device *ofdev)
+{
+	struct grgpio_priv *priv = platform_get_drvdata(ofdev);
+	int i;
+	int ret = 0;
+
+	if (priv->domain) {
+		for (i = 0; i < GRGPIO_MAX_NGPIO; i++) {
+			if (priv->uirqs[i].refcnt != 0) {
+				ret = -EBUSY;
+				goto out;
+			}
+		}
+	}
+
+	gpiochip_remove(&priv->gc);
+
+	if (priv->domain)
+		irq_domain_remove(priv->domain);
+
+out:
+	return ret;
+}
+
+static const struct of_device_id grgpio_match[] = {
+	{.name = "GAISLER_GPIO"},
+	{.name = "01_01a"},
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, grgpio_match);
+
+static struct platform_driver grgpio_driver = {
+	.driver = {
+		.name = "grgpio",
+		.of_match_table = grgpio_match,
+	},
+	.probe = grgpio_probe,
+	.remove = grgpio_remove,
+};
+module_platform_driver(grgpio_driver);
+
+MODULE_AUTHOR("Aeroflex Gaisler AB.");
+MODULE_DESCRIPTION("Driver for Aeroflex Gaisler GRGPIO");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/gpio-gw-pld.c b/drivers/gpio/gpio-gw-pld.c
new file mode 100644
index 000000000..242112ff6
--- /dev/null
+++ b/drivers/gpio/gpio-gw-pld.c
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Gateworks I2C PLD GPIO expander
+//
+// Copyright (C) 2019 Linus Walleij <linus.walleij@linaro.org>
+//
+// Based on code and know-how from the OpenWrt driver:
+// Copyright (C) 2009 Gateworks Corporation
+// Authors: Chris Lang, Imre Kaloz
+
+#include <linux/bits.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/gpio/driver.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+
+/**
+ * struct gw_pld - State container for Gateworks PLD
+ * @chip: GPIO chip instance
+ * @client: I2C client
+ * @out: shadow register for the output bute
+ */
+struct gw_pld {
+	struct gpio_chip chip;
+	struct i2c_client *client;
+	u8 out;
+};
+
+/*
+ * The Gateworks I2C PLD chip only expose one read and one write register.
+ * Writing a "one" bit (to match the reset state) lets that pin be used as an
+ * input. It is an open-drain model.
+ */
+static int gw_pld_input8(struct gpio_chip *gc, unsigned offset)
+{
+	struct gw_pld *gw = gpiochip_get_data(gc);
+
+	gw->out |= BIT(offset);
+	return i2c_smbus_write_byte(gw->client, gw->out);
+}
+
+static int gw_pld_get8(struct gpio_chip *gc, unsigned offset)
+{
+	struct gw_pld *gw = gpiochip_get_data(gc);
+	s32 val;
+
+	val = i2c_smbus_read_byte(gw->client);
+
+	return (val < 0) ? 0 : !!(val & BIT(offset));
+}
+
+static int gw_pld_output8(struct gpio_chip *gc, unsigned offset, int value)
+{
+	struct gw_pld *gw = gpiochip_get_data(gc);
+
+	if (value)
+		gw->out |= BIT(offset);
+	else
+		gw->out &= ~BIT(offset);
+
+	return i2c_smbus_write_byte(gw->client, gw->out);
+}
+
+static void gw_pld_set8(struct gpio_chip *gc, unsigned offset, int value)
+{
+	gw_pld_output8(gc, offset, value);
+}
+
+static int gw_pld_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct device_node *np = dev->of_node;
+	struct gw_pld *gw;
+	int ret;
+
+	gw = devm_kzalloc(dev, sizeof(*gw), GFP_KERNEL);
+	if (!gw)
+		return -ENOMEM;
+
+	gw->chip.base = -1;
+	gw->chip.can_sleep = true;
+	gw->chip.parent = dev;
+	gw->chip.of_node = np;
+	gw->chip.owner = THIS_MODULE;
+	gw->chip.label = dev_name(dev);
+	gw->chip.ngpio = 8;
+	gw->chip.direction_input = gw_pld_input8;
+	gw->chip.get = gw_pld_get8;
+	gw->chip.direction_output = gw_pld_output8;
+	gw->chip.set = gw_pld_set8;
+	gw->client = client;
+
+	/*
+	 * The Gateworks I2C PLD chip does not properly send the acknowledge
+	 * bit at all times, but we can still use the standard i2c_smbus
+	 * functions by simply ignoring this bit.
+	 */
+	client->flags |= I2C_M_IGNORE_NAK;
+	gw->out = 0xFF;
+
+	i2c_set_clientdata(client, gw);
+
+	ret = devm_gpiochip_add_data(dev, &gw->chip, gw);
+	if (ret)
+		return ret;
+
+	dev_info(dev, "registered Gateworks PLD GPIO device\n");
+
+	return 0;
+}
+
+static const struct i2c_device_id gw_pld_id[] = {
+	{ "gw-pld", },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, gw_pld_id);
+
+static const struct of_device_id gw_pld_dt_ids[] = {
+	{ .compatible = "gateworks,pld-gpio", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, gw_pld_dt_ids);
+
+static struct i2c_driver gw_pld_driver = {
+	.driver = {
+		.name = "gw_pld",
+		.of_match_table = gw_pld_dt_ids,
+	},
+	.probe = gw_pld_probe,
+	.id_table = gw_pld_id,
+};
+module_i2c_driver(gw_pld_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");
diff --git a/drivers/gpio/gpio-hlwd.c b/drivers/gpio/gpio-hlwd.c
new file mode 100644
index 000000000..4a17599f6
--- /dev/null
+++ b/drivers/gpio/gpio-hlwd.c
@@ -0,0 +1,305 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (C) 2008-2009 The GameCube Linux Team
+// Copyright (C) 2008,2009 Albert Herranz
+// Copyright (C) 2017-2018 Jonathan Neuschäfer
+//
+// Nintendo Wii (Hollywood) GPIO driver
+
+#include <linux/gpio/driver.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/slab.h>
+
+/*
+ * Register names and offsets courtesy of WiiBrew:
+ * https://wiibrew.org/wiki/Hardware/Hollywood_GPIOs
+ *
+ * Note that for most registers, there are two versions:
+ * - HW_GPIOB_* Is always accessible by the Broadway PowerPC core, but does
+ *   always give access to all GPIO lines
+ * - HW_GPIO_* Is only accessible by the Broadway PowerPC code if the memory
+ *   firewall (AHBPROT) in the Hollywood chipset has been configured to allow
+ *   such access.
+ *
+ * The ownership of each GPIO line can be configured in the HW_GPIO_OWNER
+ * register: A one bit configures the line for access via the HW_GPIOB_*
+ * registers, a zero bit indicates access via HW_GPIO_*. This driver uses
+ * HW_GPIOB_*.
+ */
+#define HW_GPIOB_OUT		0x00
+#define HW_GPIOB_DIR		0x04
+#define HW_GPIOB_IN		0x08
+#define HW_GPIOB_INTLVL		0x0c
+#define HW_GPIOB_INTFLAG	0x10
+#define HW_GPIOB_INTMASK	0x14
+#define HW_GPIOB_INMIR		0x18
+#define HW_GPIO_ENABLE		0x1c
+#define HW_GPIO_OUT		0x20
+#define HW_GPIO_DIR		0x24
+#define HW_GPIO_IN		0x28
+#define HW_GPIO_INTLVL		0x2c
+#define HW_GPIO_INTFLAG		0x30
+#define HW_GPIO_INTMASK		0x34
+#define HW_GPIO_INMIR		0x38
+#define HW_GPIO_OWNER		0x3c
+
+struct hlwd_gpio {
+	struct gpio_chip gpioc;
+	struct irq_chip irqc;
+	void __iomem *regs;
+	int irq;
+	u32 edge_emulation;
+	u32 rising_edge, falling_edge;
+};
+
+static void hlwd_gpio_irqhandler(struct irq_desc *desc)
+{
+	struct hlwd_gpio *hlwd =
+		gpiochip_get_data(irq_desc_get_handler_data(desc));
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+	unsigned long flags;
+	unsigned long pending;
+	int hwirq;
+	u32 emulated_pending;
+
+	spin_lock_irqsave(&hlwd->gpioc.bgpio_lock, flags);
+	pending = ioread32be(hlwd->regs + HW_GPIOB_INTFLAG);
+	pending &= ioread32be(hlwd->regs + HW_GPIOB_INTMASK);
+
+	/* Treat interrupts due to edge trigger emulation separately */
+	emulated_pending = hlwd->edge_emulation & pending;
+	pending &= ~emulated_pending;
+	if (emulated_pending) {
+		u32 level, rising, falling;
+
+		level = ioread32be(hlwd->regs + HW_GPIOB_INTLVL);
+		rising = level & emulated_pending;
+		falling = ~level & emulated_pending;
+
+		/* Invert the levels */
+		iowrite32be(level ^ emulated_pending,
+			    hlwd->regs + HW_GPIOB_INTLVL);
+
+		/* Ack all emulated-edge interrupts */
+		iowrite32be(emulated_pending, hlwd->regs + HW_GPIOB_INTFLAG);
+
+		/* Signal interrupts only on the correct edge */
+		rising &= hlwd->rising_edge;
+		falling &= hlwd->falling_edge;
+
+		/* Mark emulated interrupts as pending */
+		pending |= rising | falling;
+	}
+	spin_unlock_irqrestore(&hlwd->gpioc.bgpio_lock, flags);
+
+	chained_irq_enter(chip, desc);
+
+	for_each_set_bit(hwirq, &pending, 32) {
+		int irq = irq_find_mapping(hlwd->gpioc.irq.domain, hwirq);
+
+		generic_handle_irq(irq);
+	}
+
+	chained_irq_exit(chip, desc);
+}
+
+static void hlwd_gpio_irq_ack(struct irq_data *data)
+{
+	struct hlwd_gpio *hlwd =
+		gpiochip_get_data(irq_data_get_irq_chip_data(data));
+
+	iowrite32be(BIT(data->hwirq), hlwd->regs + HW_GPIOB_INTFLAG);
+}
+
+static void hlwd_gpio_irq_mask(struct irq_data *data)
+{
+	struct hlwd_gpio *hlwd =
+		gpiochip_get_data(irq_data_get_irq_chip_data(data));
+	unsigned long flags;
+	u32 mask;
+
+	spin_lock_irqsave(&hlwd->gpioc.bgpio_lock, flags);
+	mask = ioread32be(hlwd->regs + HW_GPIOB_INTMASK);
+	mask &= ~BIT(data->hwirq);
+	iowrite32be(mask, hlwd->regs + HW_GPIOB_INTMASK);
+	spin_unlock_irqrestore(&hlwd->gpioc.bgpio_lock, flags);
+}
+
+static void hlwd_gpio_irq_unmask(struct irq_data *data)
+{
+	struct hlwd_gpio *hlwd =
+		gpiochip_get_data(irq_data_get_irq_chip_data(data));
+	unsigned long flags;
+	u32 mask;
+
+	spin_lock_irqsave(&hlwd->gpioc.bgpio_lock, flags);
+	mask = ioread32be(hlwd->regs + HW_GPIOB_INTMASK);
+	mask |= BIT(data->hwirq);
+	iowrite32be(mask, hlwd->regs + HW_GPIOB_INTMASK);
+	spin_unlock_irqrestore(&hlwd->gpioc.bgpio_lock, flags);
+}
+
+static void hlwd_gpio_irq_enable(struct irq_data *data)
+{
+	hlwd_gpio_irq_ack(data);
+	hlwd_gpio_irq_unmask(data);
+}
+
+static void hlwd_gpio_irq_setup_emulation(struct hlwd_gpio *hlwd, int hwirq,
+					  unsigned int flow_type)
+{
+	u32 level, state;
+
+	/* Set the trigger level to the inactive level */
+	level = ioread32be(hlwd->regs + HW_GPIOB_INTLVL);
+	state = ioread32be(hlwd->regs + HW_GPIOB_IN) & BIT(hwirq);
+	level &= ~BIT(hwirq);
+	level |= state ^ BIT(hwirq);
+	iowrite32be(level, hlwd->regs + HW_GPIOB_INTLVL);
+
+	hlwd->edge_emulation |= BIT(hwirq);
+	hlwd->rising_edge &= ~BIT(hwirq);
+	hlwd->falling_edge &= ~BIT(hwirq);
+	if (flow_type & IRQ_TYPE_EDGE_RISING)
+		hlwd->rising_edge |= BIT(hwirq);
+	if (flow_type & IRQ_TYPE_EDGE_FALLING)
+		hlwd->falling_edge |= BIT(hwirq);
+}
+
+static int hlwd_gpio_irq_set_type(struct irq_data *data, unsigned int flow_type)
+{
+	struct hlwd_gpio *hlwd =
+		gpiochip_get_data(irq_data_get_irq_chip_data(data));
+	unsigned long flags;
+	u32 level;
+
+	spin_lock_irqsave(&hlwd->gpioc.bgpio_lock, flags);
+
+	hlwd->edge_emulation &= ~BIT(data->hwirq);
+
+	switch (flow_type) {
+	case IRQ_TYPE_LEVEL_HIGH:
+		level = ioread32be(hlwd->regs + HW_GPIOB_INTLVL);
+		level |= BIT(data->hwirq);
+		iowrite32be(level, hlwd->regs + HW_GPIOB_INTLVL);
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		level = ioread32be(hlwd->regs + HW_GPIOB_INTLVL);
+		level &= ~BIT(data->hwirq);
+		iowrite32be(level, hlwd->regs + HW_GPIOB_INTLVL);
+		break;
+	case IRQ_TYPE_EDGE_RISING:
+	case IRQ_TYPE_EDGE_FALLING:
+	case IRQ_TYPE_EDGE_BOTH:
+		hlwd_gpio_irq_setup_emulation(hlwd, data->hwirq, flow_type);
+		break;
+	default:
+		spin_unlock_irqrestore(&hlwd->gpioc.bgpio_lock, flags);
+		return -EINVAL;
+	}
+
+	spin_unlock_irqrestore(&hlwd->gpioc.bgpio_lock, flags);
+	return 0;
+}
+
+static int hlwd_gpio_probe(struct platform_device *pdev)
+{
+	struct hlwd_gpio *hlwd;
+	u32 ngpios;
+	int res;
+
+	hlwd = devm_kzalloc(&pdev->dev, sizeof(*hlwd), GFP_KERNEL);
+	if (!hlwd)
+		return -ENOMEM;
+
+	hlwd->regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(hlwd->regs))
+		return PTR_ERR(hlwd->regs);
+
+	/*
+	 * Claim all GPIOs using the OWNER register. This will not work on
+	 * systems where the AHBPROT memory firewall hasn't been configured to
+	 * permit PPC access to HW_GPIO_*.
+	 *
+	 * Note that this has to happen before bgpio_init reads the
+	 * HW_GPIOB_OUT and HW_GPIOB_DIR, because otherwise it reads the wrong
+	 * values.
+	 */
+	iowrite32be(0xffffffff, hlwd->regs + HW_GPIO_OWNER);
+
+	res = bgpio_init(&hlwd->gpioc, &pdev->dev, 4,
+			hlwd->regs + HW_GPIOB_IN, hlwd->regs + HW_GPIOB_OUT,
+			NULL, hlwd->regs + HW_GPIOB_DIR, NULL,
+			BGPIOF_BIG_ENDIAN_BYTE_ORDER);
+	if (res < 0) {
+		dev_warn(&pdev->dev, "bgpio_init failed: %d\n", res);
+		return res;
+	}
+
+	res = of_property_read_u32(pdev->dev.of_node, "ngpios", &ngpios);
+	if (res)
+		ngpios = 32;
+	hlwd->gpioc.ngpio = ngpios;
+
+	/* Mask and ack all interrupts */
+	iowrite32be(0, hlwd->regs + HW_GPIOB_INTMASK);
+	iowrite32be(0xffffffff, hlwd->regs + HW_GPIOB_INTFLAG);
+
+	/*
+	 * If this GPIO controller is not marked as an interrupt controller in
+	 * the DT, skip interrupt support.
+	 */
+	if (of_property_read_bool(pdev->dev.of_node, "interrupt-controller")) {
+		struct gpio_irq_chip *girq;
+
+		hlwd->irq = platform_get_irq(pdev, 0);
+		if (hlwd->irq < 0) {
+			dev_info(&pdev->dev, "platform_get_irq returned %d\n",
+				 hlwd->irq);
+			return hlwd->irq;
+		}
+
+		hlwd->irqc.name = dev_name(&pdev->dev);
+		hlwd->irqc.irq_mask = hlwd_gpio_irq_mask;
+		hlwd->irqc.irq_unmask = hlwd_gpio_irq_unmask;
+		hlwd->irqc.irq_enable = hlwd_gpio_irq_enable;
+		hlwd->irqc.irq_set_type = hlwd_gpio_irq_set_type;
+
+		girq = &hlwd->gpioc.irq;
+		girq->chip = &hlwd->irqc;
+		girq->parent_handler = hlwd_gpio_irqhandler;
+		girq->num_parents = 1;
+		girq->parents = devm_kcalloc(&pdev->dev, 1,
+					     sizeof(*girq->parents),
+					     GFP_KERNEL);
+		if (!girq->parents)
+			return -ENOMEM;
+		girq->parents[0] = hlwd->irq;
+		girq->default_type = IRQ_TYPE_NONE;
+		girq->handler = handle_level_irq;
+	}
+
+	return devm_gpiochip_add_data(&pdev->dev, &hlwd->gpioc, hlwd);
+}
+
+static const struct of_device_id hlwd_gpio_match[] = {
+	{ .compatible = "nintendo,hollywood-gpio", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, hlwd_gpio_match);
+
+static struct platform_driver hlwd_gpio_driver = {
+	.driver	= {
+		.name		= "gpio-hlwd",
+		.of_match_table	= hlwd_gpio_match,
+	},
+	.probe	= hlwd_gpio_probe,
+};
+module_platform_driver(hlwd_gpio_driver);
+
+MODULE_AUTHOR("Jonathan Neuschäfer <j.neuschaefer@gmx.net>");
+MODULE_DESCRIPTION("Nintendo Wii GPIO driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/gpio-htc-egpio.c b/drivers/gpio/gpio-htc-egpio.c
new file mode 100644
index 000000000..a40bd5667
--- /dev/null
+++ b/drivers/gpio/gpio-htc-egpio.c
@@ -0,0 +1,409 @@
+/*
+ * Support for the GPIO/IRQ expander chips present on several HTC phones.
+ * These are implemented in CPLD chips present on the board.
+ *
+ * Copyright (c) 2007 Kevin O'Connor <kevin@koconnor.net>
+ * Copyright (c) 2007 Philipp Zabel <philipp.zabel@gmail.com>
+ *
+ * This file may be distributed under the terms of the GNU GPL license.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/spinlock.h>
+#include <linux/platform_data/gpio-htc-egpio.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/gpio/driver.h>
+
+struct egpio_chip {
+	int              reg_start;
+	int              cached_values;
+	unsigned long    is_out;
+	struct device    *dev;
+	struct gpio_chip chip;
+};
+
+struct egpio_info {
+	spinlock_t        lock;
+
+	/* iomem info */
+	void __iomem      *base_addr;
+	int               bus_shift;	/* byte shift */
+	int               reg_shift;	/* bit shift */
+	int               reg_mask;
+
+	/* irq info */
+	int               ack_register;
+	int               ack_write;
+	u16               irqs_enabled;
+	uint              irq_start;
+	int               nirqs;
+	uint              chained_irq;
+
+	/* egpio info */
+	struct egpio_chip *chip;
+	int               nchips;
+};
+
+static inline void egpio_writew(u16 value, struct egpio_info *ei, int reg)
+{
+	writew(value, ei->base_addr + (reg << ei->bus_shift));
+}
+
+static inline u16 egpio_readw(struct egpio_info *ei, int reg)
+{
+	return readw(ei->base_addr + (reg << ei->bus_shift));
+}
+
+/*
+ * IRQs
+ */
+
+static inline void ack_irqs(struct egpio_info *ei)
+{
+	egpio_writew(ei->ack_write, ei, ei->ack_register);
+	pr_debug("EGPIO ack - write %x to base+%x\n",
+			ei->ack_write, ei->ack_register << ei->bus_shift);
+}
+
+static void egpio_ack(struct irq_data *data)
+{
+}
+
+/* There does not appear to be a way to proactively mask interrupts
+ * on the egpio chip itself.  So, we simply ignore interrupts that
+ * aren't desired. */
+static void egpio_mask(struct irq_data *data)
+{
+	struct egpio_info *ei = irq_data_get_irq_chip_data(data);
+	ei->irqs_enabled &= ~(1 << (data->irq - ei->irq_start));
+	pr_debug("EGPIO mask %d %04x\n", data->irq, ei->irqs_enabled);
+}
+
+static void egpio_unmask(struct irq_data *data)
+{
+	struct egpio_info *ei = irq_data_get_irq_chip_data(data);
+	ei->irqs_enabled |= 1 << (data->irq - ei->irq_start);
+	pr_debug("EGPIO unmask %d %04x\n", data->irq, ei->irqs_enabled);
+}
+
+static struct irq_chip egpio_muxed_chip = {
+	.name		= "htc-egpio",
+	.irq_ack	= egpio_ack,
+	.irq_mask	= egpio_mask,
+	.irq_unmask	= egpio_unmask,
+};
+
+static void egpio_handler(struct irq_desc *desc)
+{
+	struct egpio_info *ei = irq_desc_get_handler_data(desc);
+	int irqpin;
+
+	/* Read current pins. */
+	unsigned long readval = egpio_readw(ei, ei->ack_register);
+	pr_debug("IRQ reg: %x\n", (unsigned int)readval);
+	/* Ack/unmask interrupts. */
+	ack_irqs(ei);
+	/* Process all set pins. */
+	readval &= ei->irqs_enabled;
+	for_each_set_bit(irqpin, &readval, ei->nirqs) {
+		/* Run irq handler */
+		pr_debug("got IRQ %d\n", irqpin);
+		generic_handle_irq(ei->irq_start + irqpin);
+	}
+}
+
+static inline int egpio_pos(struct egpio_info *ei, int bit)
+{
+	return bit >> ei->reg_shift;
+}
+
+static inline int egpio_bit(struct egpio_info *ei, int bit)
+{
+	return 1 << (bit & ((1 << ei->reg_shift)-1));
+}
+
+/*
+ * Input pins
+ */
+
+static int egpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct egpio_chip *egpio;
+	struct egpio_info *ei;
+	unsigned           bit;
+	int                reg;
+	int                value;
+
+	pr_debug("egpio_get_value(%d)\n", chip->base + offset);
+
+	egpio = gpiochip_get_data(chip);
+	ei    = dev_get_drvdata(egpio->dev);
+	bit   = egpio_bit(ei, offset);
+	reg   = egpio->reg_start + egpio_pos(ei, offset);
+
+	if (test_bit(offset, &egpio->is_out)) {
+		return !!(egpio->cached_values & (1 << offset));
+	} else {
+		value = egpio_readw(ei, reg);
+		pr_debug("readw(%p + %x) = %x\n",
+			 ei->base_addr, reg << ei->bus_shift, value);
+		return !!(value & bit);
+	}
+}
+
+static int egpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct egpio_chip *egpio;
+
+	egpio = gpiochip_get_data(chip);
+	return test_bit(offset, &egpio->is_out) ? -EINVAL : 0;
+}
+
+
+/*
+ * Output pins
+ */
+
+static void egpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	unsigned long     flag;
+	struct egpio_chip *egpio;
+	struct egpio_info *ei;
+	int               pos;
+	int               reg;
+	int               shift;
+
+	pr_debug("egpio_set(%s, %d(%d), %d)\n",
+			chip->label, offset, offset+chip->base, value);
+
+	egpio = gpiochip_get_data(chip);
+	ei    = dev_get_drvdata(egpio->dev);
+	pos   = egpio_pos(ei, offset);
+	reg   = egpio->reg_start + pos;
+	shift = pos << ei->reg_shift;
+
+	pr_debug("egpio %s: reg %d = 0x%04x\n", value ? "set" : "clear",
+			reg, (egpio->cached_values >> shift) & ei->reg_mask);
+
+	spin_lock_irqsave(&ei->lock, flag);
+	if (value)
+		egpio->cached_values |= (1 << offset);
+	else
+		egpio->cached_values &= ~(1 << offset);
+	egpio_writew((egpio->cached_values >> shift) & ei->reg_mask, ei, reg);
+	spin_unlock_irqrestore(&ei->lock, flag);
+}
+
+static int egpio_direction_output(struct gpio_chip *chip,
+					unsigned offset, int value)
+{
+	struct egpio_chip *egpio;
+
+	egpio = gpiochip_get_data(chip);
+	if (test_bit(offset, &egpio->is_out)) {
+		egpio_set(chip, offset, value);
+		return 0;
+	} else {
+		return -EINVAL;
+	}
+}
+
+static int egpio_get_direction(struct gpio_chip *chip, unsigned offset)
+{
+	struct egpio_chip *egpio;
+
+	egpio = gpiochip_get_data(chip);
+
+	if (test_bit(offset, &egpio->is_out))
+		return GPIO_LINE_DIRECTION_OUT;
+
+	return GPIO_LINE_DIRECTION_IN;
+}
+
+static void egpio_write_cache(struct egpio_info *ei)
+{
+	int               i;
+	struct egpio_chip *egpio;
+	int               shift;
+
+	for (i = 0; i < ei->nchips; i++) {
+		egpio = &(ei->chip[i]);
+		if (!egpio->is_out)
+			continue;
+
+		for (shift = 0; shift < egpio->chip.ngpio;
+				shift += (1<<ei->reg_shift)) {
+
+			int reg = egpio->reg_start + egpio_pos(ei, shift);
+
+			if (!((egpio->is_out >> shift) & ei->reg_mask))
+				continue;
+
+			pr_debug("EGPIO: setting %x to %x, was %x\n", reg,
+				(egpio->cached_values >> shift) & ei->reg_mask,
+				egpio_readw(ei, reg));
+
+			egpio_writew((egpio->cached_values >> shift)
+					& ei->reg_mask, ei, reg);
+		}
+	}
+}
+
+
+/*
+ * Setup
+ */
+
+static int __init egpio_probe(struct platform_device *pdev)
+{
+	struct htc_egpio_platform_data *pdata = dev_get_platdata(&pdev->dev);
+	struct resource   *res;
+	struct egpio_info *ei;
+	struct gpio_chip  *chip;
+	unsigned int      irq, irq_end;
+	int               i;
+
+	/* Initialize ei data structure. */
+	ei = devm_kzalloc(&pdev->dev, sizeof(*ei), GFP_KERNEL);
+	if (!ei)
+		return -ENOMEM;
+
+	spin_lock_init(&ei->lock);
+
+	/* Find chained irq */
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (res)
+		ei->chained_irq = res->start;
+
+	/* Map egpio chip into virtual address space. */
+	ei->base_addr = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(ei->base_addr))
+		return PTR_ERR(ei->base_addr);
+
+	if ((pdata->bus_width != 16) && (pdata->bus_width != 32))
+		return -EINVAL;
+
+	ei->bus_shift = fls(pdata->bus_width - 1) - 3;
+	pr_debug("bus_shift = %d\n", ei->bus_shift);
+
+	if ((pdata->reg_width != 8) && (pdata->reg_width != 16))
+		return -EINVAL;
+
+	ei->reg_shift = fls(pdata->reg_width - 1);
+	pr_debug("reg_shift = %d\n", ei->reg_shift);
+
+	ei->reg_mask = (1 << pdata->reg_width) - 1;
+
+	platform_set_drvdata(pdev, ei);
+
+	ei->nchips = pdata->num_chips;
+	ei->chip = devm_kcalloc(&pdev->dev,
+				ei->nchips, sizeof(struct egpio_chip),
+				GFP_KERNEL);
+	if (!ei->chip)
+		return -ENOMEM;
+
+	for (i = 0; i < ei->nchips; i++) {
+		ei->chip[i].reg_start = pdata->chip[i].reg_start;
+		ei->chip[i].cached_values = pdata->chip[i].initial_values;
+		ei->chip[i].is_out = pdata->chip[i].direction;
+		ei->chip[i].dev = &(pdev->dev);
+		chip = &(ei->chip[i].chip);
+		chip->label = devm_kasprintf(&pdev->dev, GFP_KERNEL,
+					     "htc-egpio-%d",
+					     i);
+		if (!chip->label)
+			return -ENOMEM;
+
+		chip->parent          = &pdev->dev;
+		chip->owner           = THIS_MODULE;
+		chip->get             = egpio_get;
+		chip->set             = egpio_set;
+		chip->direction_input = egpio_direction_input;
+		chip->direction_output = egpio_direction_output;
+		chip->get_direction   = egpio_get_direction;
+		chip->base            = pdata->chip[i].gpio_base;
+		chip->ngpio           = pdata->chip[i].num_gpios;
+
+		gpiochip_add_data(chip, &ei->chip[i]);
+	}
+
+	/* Set initial pin values */
+	egpio_write_cache(ei);
+
+	ei->irq_start = pdata->irq_base;
+	ei->nirqs = pdata->num_irqs;
+	ei->ack_register = pdata->ack_register;
+
+	if (ei->chained_irq) {
+		/* Setup irq handlers */
+		ei->ack_write = 0xFFFF;
+		if (pdata->invert_acks)
+			ei->ack_write = 0;
+		irq_end = ei->irq_start + ei->nirqs;
+		for (irq = ei->irq_start; irq < irq_end; irq++) {
+			irq_set_chip_and_handler(irq, &egpio_muxed_chip,
+						 handle_simple_irq);
+			irq_set_chip_data(irq, ei);
+			irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
+		}
+		irq_set_irq_type(ei->chained_irq, IRQ_TYPE_EDGE_RISING);
+		irq_set_chained_handler_and_data(ei->chained_irq,
+						 egpio_handler, ei);
+		ack_irqs(ei);
+
+		device_init_wakeup(&pdev->dev, 1);
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int egpio_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct egpio_info *ei = platform_get_drvdata(pdev);
+
+	if (ei->chained_irq && device_may_wakeup(&pdev->dev))
+		enable_irq_wake(ei->chained_irq);
+	return 0;
+}
+
+static int egpio_resume(struct platform_device *pdev)
+{
+	struct egpio_info *ei = platform_get_drvdata(pdev);
+
+	if (ei->chained_irq && device_may_wakeup(&pdev->dev))
+		disable_irq_wake(ei->chained_irq);
+
+	/* Update registers from the cache, in case
+	   the CPLD was powered off during suspend */
+	egpio_write_cache(ei);
+	return 0;
+}
+#else
+#define egpio_suspend NULL
+#define egpio_resume NULL
+#endif
+
+
+static struct platform_driver egpio_driver = {
+	.driver = {
+		.name = "htc-egpio",
+		.suppress_bind_attrs = true,
+	},
+	.suspend      = egpio_suspend,
+	.resume       = egpio_resume,
+};
+
+static int __init egpio_init(void)
+{
+	return platform_driver_probe(&egpio_driver, egpio_probe);
+}
+/* start early for dependencies */
+subsys_initcall(egpio_init);
diff --git a/drivers/gpio/gpio-ich.c b/drivers/gpio/gpio-ich.c
new file mode 100644
index 000000000..de56c013a
--- /dev/null
+++ b/drivers/gpio/gpio-ich.c
@@ -0,0 +1,494 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Intel ICH6-10, Series 5 and 6, Atom C2000 (Avoton/Rangeley) GPIO driver
+ *
+ * Copyright (C) 2010 Extreme Engineering Solutions.
+ */
+
+
+#include <linux/bitops.h>
+#include <linux/gpio/driver.h>
+#include <linux/ioport.h>
+#include <linux/mfd/lpc_ich.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+
+#define DRV_NAME "gpio_ich"
+
+/*
+ * GPIO register offsets in GPIO I/O space.
+ * Each chunk of 32 GPIOs is manipulated via its own USE_SELx, IO_SELx, and
+ * LVLx registers.  Logic in the read/write functions takes a register and
+ * an absolute bit number and determines the proper register offset and bit
+ * number in that register.  For example, to read the value of GPIO bit 50
+ * the code would access offset ichx_regs[2(=GPIO_LVL)][1(=50/32)],
+ * bit 18 (50%32).
+ */
+enum GPIO_REG {
+	GPIO_USE_SEL = 0,
+	GPIO_IO_SEL,
+	GPIO_LVL,
+	GPO_BLINK
+};
+
+static const u8 ichx_regs[4][3] = {
+	{0x00, 0x30, 0x40},	/* USE_SEL[1-3] offsets */
+	{0x04, 0x34, 0x44},	/* IO_SEL[1-3] offsets */
+	{0x0c, 0x38, 0x48},	/* LVL[1-3] offsets */
+	{0x18, 0x18, 0x18},	/* BLINK offset */
+};
+
+static const u8 ichx_reglen[3] = {
+	0x30, 0x10, 0x10,
+};
+
+static const u8 avoton_regs[4][3] = {
+	{0x00, 0x80, 0x00},
+	{0x04, 0x84, 0x00},
+	{0x08, 0x88, 0x00},
+};
+
+static const u8 avoton_reglen[3] = {
+	0x10, 0x10, 0x00,
+};
+
+#define ICHX_WRITE(val, reg, base_res)	outl(val, (reg) + (base_res)->start)
+#define ICHX_READ(reg, base_res)	inl((reg) + (base_res)->start)
+
+struct ichx_desc {
+	/* Max GPIO pins the chipset can have */
+	uint ngpio;
+
+	/* chipset registers */
+	const u8 (*regs)[3];
+	const u8 *reglen;
+
+	/* GPO_BLINK is available on this chipset */
+	bool have_blink;
+
+	/* Whether the chipset has GPIO in GPE0_STS in the PM IO region */
+	bool uses_gpe0;
+
+	/* USE_SEL is bogus on some chipsets, eg 3100 */
+	u32 use_sel_ignore[3];
+
+	/* Some chipsets have quirks, let these use their own request/get */
+	int (*request)(struct gpio_chip *chip, unsigned int offset);
+	int (*get)(struct gpio_chip *chip, unsigned int offset);
+
+	/*
+	 * Some chipsets don't let reading output values on GPIO_LVL register
+	 * this option allows driver caching written output values
+	 */
+	bool use_outlvl_cache;
+};
+
+static struct {
+	spinlock_t lock;
+	struct device *dev;
+	struct gpio_chip chip;
+	struct resource *gpio_base;	/* GPIO IO base */
+	struct resource *pm_base;	/* Power Management IO base */
+	struct ichx_desc *desc;	/* Pointer to chipset-specific description */
+	u32 orig_gpio_ctrl;	/* Orig CTRL value, used to restore on exit */
+	u8 use_gpio;		/* Which GPIO groups are usable */
+	int outlvl_cache[3];	/* cached output values */
+} ichx_priv;
+
+static int modparam_gpiobase = -1;	/* dynamic */
+module_param_named(gpiobase, modparam_gpiobase, int, 0444);
+MODULE_PARM_DESC(gpiobase, "The GPIO number base. -1 means dynamic, which is the default.");
+
+static int ichx_write_bit(int reg, unsigned int nr, int val, int verify)
+{
+	unsigned long flags;
+	u32 data, tmp;
+	int reg_nr = nr / 32;
+	int bit = nr & 0x1f;
+
+	spin_lock_irqsave(&ichx_priv.lock, flags);
+
+	if (reg == GPIO_LVL && ichx_priv.desc->use_outlvl_cache)
+		data = ichx_priv.outlvl_cache[reg_nr];
+	else
+		data = ICHX_READ(ichx_priv.desc->regs[reg][reg_nr],
+				 ichx_priv.gpio_base);
+
+	if (val)
+		data |= BIT(bit);
+	else
+		data &= ~BIT(bit);
+	ICHX_WRITE(data, ichx_priv.desc->regs[reg][reg_nr],
+			 ichx_priv.gpio_base);
+	if (reg == GPIO_LVL && ichx_priv.desc->use_outlvl_cache)
+		ichx_priv.outlvl_cache[reg_nr] = data;
+
+	tmp = ICHX_READ(ichx_priv.desc->regs[reg][reg_nr],
+			ichx_priv.gpio_base);
+
+	spin_unlock_irqrestore(&ichx_priv.lock, flags);
+
+	return (verify && data != tmp) ? -EPERM : 0;
+}
+
+static int ichx_read_bit(int reg, unsigned int nr)
+{
+	unsigned long flags;
+	u32 data;
+	int reg_nr = nr / 32;
+	int bit = nr & 0x1f;
+
+	spin_lock_irqsave(&ichx_priv.lock, flags);
+
+	data = ICHX_READ(ichx_priv.desc->regs[reg][reg_nr],
+			 ichx_priv.gpio_base);
+
+	if (reg == GPIO_LVL && ichx_priv.desc->use_outlvl_cache)
+		data = ichx_priv.outlvl_cache[reg_nr] | data;
+
+	spin_unlock_irqrestore(&ichx_priv.lock, flags);
+
+	return !!(data & BIT(bit));
+}
+
+static bool ichx_gpio_check_available(struct gpio_chip *gpio, unsigned int nr)
+{
+	return !!(ichx_priv.use_gpio & BIT(nr / 32));
+}
+
+static int ichx_gpio_get_direction(struct gpio_chip *gpio, unsigned int nr)
+{
+	if (ichx_read_bit(GPIO_IO_SEL, nr))
+		return GPIO_LINE_DIRECTION_IN;
+
+	return GPIO_LINE_DIRECTION_OUT;
+}
+
+static int ichx_gpio_direction_input(struct gpio_chip *gpio, unsigned int nr)
+{
+	/*
+	 * Try setting pin as an input and verify it worked since many pins
+	 * are output-only.
+	 */
+	return ichx_write_bit(GPIO_IO_SEL, nr, 1, 1);
+}
+
+static int ichx_gpio_direction_output(struct gpio_chip *gpio, unsigned int nr,
+					int val)
+{
+	/* Disable blink hardware which is available for GPIOs from 0 to 31. */
+	if (nr < 32 && ichx_priv.desc->have_blink)
+		ichx_write_bit(GPO_BLINK, nr, 0, 0);
+
+	/* Set GPIO output value. */
+	ichx_write_bit(GPIO_LVL, nr, val, 0);
+
+	/*
+	 * Try setting pin as an output and verify it worked since many pins
+	 * are input-only.
+	 */
+	return ichx_write_bit(GPIO_IO_SEL, nr, 0, 1);
+}
+
+static int ichx_gpio_get(struct gpio_chip *chip, unsigned int nr)
+{
+	return ichx_read_bit(GPIO_LVL, nr);
+}
+
+static int ich6_gpio_get(struct gpio_chip *chip, unsigned int nr)
+{
+	unsigned long flags;
+	u32 data;
+
+	/*
+	 * GPI 0 - 15 need to be read from the power management registers on
+	 * a ICH6/3100 bridge.
+	 */
+	if (nr < 16) {
+		if (!ichx_priv.pm_base)
+			return -ENXIO;
+
+		spin_lock_irqsave(&ichx_priv.lock, flags);
+
+		/* GPI 0 - 15 are latched, write 1 to clear*/
+		ICHX_WRITE(BIT(16 + nr), 0, ichx_priv.pm_base);
+		data = ICHX_READ(0, ichx_priv.pm_base);
+
+		spin_unlock_irqrestore(&ichx_priv.lock, flags);
+
+		return !!((data >> 16) & BIT(nr));
+	} else {
+		return ichx_gpio_get(chip, nr);
+	}
+}
+
+static int ichx_gpio_request(struct gpio_chip *chip, unsigned int nr)
+{
+	if (!ichx_gpio_check_available(chip, nr))
+		return -ENXIO;
+
+	/*
+	 * Note we assume the BIOS properly set a bridge's USE value.  Some
+	 * chips (eg Intel 3100) have bogus USE values though, so first see if
+	 * the chipset's USE value can be trusted for this specific bit.
+	 * If it can't be trusted, assume that the pin can be used as a GPIO.
+	 */
+	if (ichx_priv.desc->use_sel_ignore[nr / 32] & BIT(nr & 0x1f))
+		return 0;
+
+	return ichx_read_bit(GPIO_USE_SEL, nr) ? 0 : -ENODEV;
+}
+
+static int ich6_gpio_request(struct gpio_chip *chip, unsigned int nr)
+{
+	/*
+	 * Fixups for bits 16 and 17 are necessary on the Intel ICH6/3100
+	 * bridge as they are controlled by USE register bits 0 and 1.  See
+	 * "Table 704 GPIO_USE_SEL1 register" in the i3100 datasheet for
+	 * additional info.
+	 */
+	if (nr == 16 || nr == 17)
+		nr -= 16;
+
+	return ichx_gpio_request(chip, nr);
+}
+
+static void ichx_gpio_set(struct gpio_chip *chip, unsigned int nr, int val)
+{
+	ichx_write_bit(GPIO_LVL, nr, val, 0);
+}
+
+static void ichx_gpiolib_setup(struct gpio_chip *chip)
+{
+	chip->owner = THIS_MODULE;
+	chip->label = DRV_NAME;
+	chip->parent = ichx_priv.dev;
+
+	/* Allow chip-specific overrides of request()/get() */
+	chip->request = ichx_priv.desc->request ?
+		ichx_priv.desc->request : ichx_gpio_request;
+	chip->get = ichx_priv.desc->get ?
+		ichx_priv.desc->get : ichx_gpio_get;
+
+	chip->set = ichx_gpio_set;
+	chip->get_direction = ichx_gpio_get_direction;
+	chip->direction_input = ichx_gpio_direction_input;
+	chip->direction_output = ichx_gpio_direction_output;
+	chip->base = modparam_gpiobase;
+	chip->ngpio = ichx_priv.desc->ngpio;
+	chip->can_sleep = false;
+	chip->dbg_show = NULL;
+}
+
+/* ICH6-based, 631xesb-based */
+static struct ichx_desc ich6_desc = {
+	/* Bridges using the ICH6 controller need fixups for GPIO 0 - 17 */
+	.request = ich6_gpio_request,
+	.get = ich6_gpio_get,
+
+	/* GPIO 0-15 are read in the GPE0_STS PM register */
+	.uses_gpe0 = true,
+
+	.ngpio = 50,
+	.have_blink = true,
+	.regs = ichx_regs,
+	.reglen = ichx_reglen,
+};
+
+/* Intel 3100 */
+static struct ichx_desc i3100_desc = {
+	/*
+	 * Bits 16,17, 20 of USE_SEL and bit 16 of USE_SEL2 always read 0 on
+	 * the Intel 3100.  See "Table 712. GPIO Summary Table" of 3100
+	 * Datasheet for more info.
+	 */
+	.use_sel_ignore = {0x00130000, 0x00010000, 0x0},
+
+	/* The 3100 needs fixups for GPIO 0 - 17 */
+	.request = ich6_gpio_request,
+	.get = ich6_gpio_get,
+
+	/* GPIO 0-15 are read in the GPE0_STS PM register */
+	.uses_gpe0 = true,
+
+	.ngpio = 50,
+	.regs = ichx_regs,
+	.reglen = ichx_reglen,
+};
+
+/* ICH7 and ICH8-based */
+static struct ichx_desc ich7_desc = {
+	.ngpio = 50,
+	.have_blink = true,
+	.regs = ichx_regs,
+	.reglen = ichx_reglen,
+};
+
+/* ICH9-based */
+static struct ichx_desc ich9_desc = {
+	.ngpio = 61,
+	.have_blink = true,
+	.regs = ichx_regs,
+	.reglen = ichx_reglen,
+};
+
+/* ICH10-based - Consumer/corporate versions have different amount of GPIO */
+static struct ichx_desc ich10_cons_desc = {
+	.ngpio = 61,
+	.have_blink = true,
+	.regs = ichx_regs,
+	.reglen = ichx_reglen,
+};
+static struct ichx_desc ich10_corp_desc = {
+	.ngpio = 72,
+	.have_blink = true,
+	.regs = ichx_regs,
+	.reglen = ichx_reglen,
+};
+
+/* Intel 5 series, 6 series, 3400 series, and C200 series */
+static struct ichx_desc intel5_desc = {
+	.ngpio = 76,
+	.regs = ichx_regs,
+	.reglen = ichx_reglen,
+};
+
+/* Avoton */
+static struct ichx_desc avoton_desc = {
+	/* Avoton has only 59 GPIOs, but we assume the first set of register
+	 * (Core) has 32 instead of 31 to keep gpio-ich compliance
+	 */
+	.ngpio = 60,
+	.regs = avoton_regs,
+	.reglen = avoton_reglen,
+	.use_outlvl_cache = true,
+};
+
+static int ichx_gpio_request_regions(struct device *dev,
+	struct resource *res_base, const char *name, u8 use_gpio)
+{
+	int i;
+
+	if (!res_base || !res_base->start || !res_base->end)
+		return -ENODEV;
+
+	for (i = 0; i < ARRAY_SIZE(ichx_priv.desc->regs[0]); i++) {
+		if (!(use_gpio & BIT(i)))
+			continue;
+		if (!devm_request_region(dev,
+				res_base->start + ichx_priv.desc->regs[0][i],
+				ichx_priv.desc->reglen[i], name))
+			return -EBUSY;
+	}
+	return 0;
+}
+
+static int ichx_gpio_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct lpc_ich_info *ich_info = dev_get_platdata(dev);
+	struct resource *res_base, *res_pm;
+	int err;
+
+	if (!ich_info)
+		return -ENODEV;
+
+	switch (ich_info->gpio_version) {
+	case ICH_I3100_GPIO:
+		ichx_priv.desc = &i3100_desc;
+		break;
+	case ICH_V5_GPIO:
+		ichx_priv.desc = &intel5_desc;
+		break;
+	case ICH_V6_GPIO:
+		ichx_priv.desc = &ich6_desc;
+		break;
+	case ICH_V7_GPIO:
+		ichx_priv.desc = &ich7_desc;
+		break;
+	case ICH_V9_GPIO:
+		ichx_priv.desc = &ich9_desc;
+		break;
+	case ICH_V10CORP_GPIO:
+		ichx_priv.desc = &ich10_corp_desc;
+		break;
+	case ICH_V10CONS_GPIO:
+		ichx_priv.desc = &ich10_cons_desc;
+		break;
+	case AVOTON_GPIO:
+		ichx_priv.desc = &avoton_desc;
+		break;
+	default:
+		return -ENODEV;
+	}
+
+	ichx_priv.dev = dev;
+	spin_lock_init(&ichx_priv.lock);
+
+	res_base = platform_get_resource(pdev, IORESOURCE_IO, ICH_RES_GPIO);
+	err = ichx_gpio_request_regions(dev, res_base, pdev->name,
+					ich_info->use_gpio);
+	if (err)
+		return err;
+
+	ichx_priv.gpio_base = res_base;
+	ichx_priv.use_gpio = ich_info->use_gpio;
+
+	/*
+	 * If necessary, determine the I/O address of ACPI/power management
+	 * registers which are needed to read the GPE0 register for GPI pins
+	 * 0 - 15 on some chipsets.
+	 */
+	if (!ichx_priv.desc->uses_gpe0)
+		goto init;
+
+	res_pm = platform_get_resource(pdev, IORESOURCE_IO, ICH_RES_GPE0);
+	if (!res_pm) {
+		dev_warn(dev, "ACPI BAR is unavailable, GPI 0 - 15 unavailable\n");
+		goto init;
+	}
+
+	if (!devm_request_region(dev, res_pm->start, resource_size(res_pm),
+				 pdev->name)) {
+		dev_warn(dev, "ACPI BAR is busy, GPI 0 - 15 unavailable\n");
+		goto init;
+	}
+
+	ichx_priv.pm_base = res_pm;
+
+init:
+	ichx_gpiolib_setup(&ichx_priv.chip);
+	err = gpiochip_add_data(&ichx_priv.chip, NULL);
+	if (err) {
+		dev_err(dev, "Failed to register GPIOs\n");
+		return err;
+	}
+
+	dev_info(dev, "GPIO from %d to %d\n", ichx_priv.chip.base,
+		 ichx_priv.chip.base + ichx_priv.chip.ngpio - 1);
+
+	return 0;
+}
+
+static int ichx_gpio_remove(struct platform_device *pdev)
+{
+	gpiochip_remove(&ichx_priv.chip);
+
+	return 0;
+}
+
+static struct platform_driver ichx_gpio_driver = {
+	.driver		= {
+		.name	= DRV_NAME,
+	},
+	.probe		= ichx_gpio_probe,
+	.remove		= ichx_gpio_remove,
+};
+
+module_platform_driver(ichx_gpio_driver);
+
+MODULE_AUTHOR("Peter Tyser <ptyser@xes-inc.com>");
+MODULE_DESCRIPTION("GPIO interface for Intel ICH series");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:"DRV_NAME);
diff --git a/drivers/gpio/gpio-intel-mid.c b/drivers/gpio/gpio-intel-mid.c
new file mode 100644
index 000000000..86a10c808
--- /dev/null
+++ b/drivers/gpio/gpio-intel-mid.c
@@ -0,0 +1,414 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Intel MID GPIO driver
+ *
+ * Copyright (c) 2008-2014,2016 Intel Corporation.
+ */
+
+/* Supports:
+ * Moorestown platform Langwell chip.
+ * Medfield platform Penwell chip.
+ * Clovertrail platform Cloverview chip.
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/driver.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/slab.h>
+#include <linux/stddef.h>
+
+#define INTEL_MID_IRQ_TYPE_EDGE		(1 << 0)
+#define INTEL_MID_IRQ_TYPE_LEVEL	(1 << 1)
+
+/*
+ * Langwell chip has 64 pins and thus there are 2 32bit registers to control
+ * each feature, while Penwell chip has 96 pins for each block, and need 3 32bit
+ * registers to control them, so we only define the order here instead of a
+ * structure, to get a bit offset for a pin (use GPDR as an example):
+ *
+ * nreg = ngpio / 32;
+ * reg = offset / 32;
+ * bit = offset % 32;
+ * reg_addr = reg_base + GPDR * nreg * 4 + reg * 4;
+ *
+ * so the bit of reg_addr is to control pin offset's GPDR feature
+*/
+
+enum GPIO_REG {
+	GPLR = 0,	/* pin level read-only */
+	GPDR,		/* pin direction */
+	GPSR,		/* pin set */
+	GPCR,		/* pin clear */
+	GRER,		/* rising edge detect */
+	GFER,		/* falling edge detect */
+	GEDR,		/* edge detect result */
+	GAFR,		/* alt function */
+};
+
+/* intel_mid gpio driver data */
+struct intel_mid_gpio_ddata {
+	u16 ngpio;		/* number of gpio pins */
+	u32 chip_irq_type;	/* chip interrupt type */
+};
+
+struct intel_mid_gpio {
+	struct gpio_chip		chip;
+	void __iomem			*reg_base;
+	spinlock_t			lock;
+	struct pci_dev			*pdev;
+};
+
+static void __iomem *gpio_reg(struct gpio_chip *chip, unsigned offset,
+			      enum GPIO_REG reg_type)
+{
+	struct intel_mid_gpio *priv = gpiochip_get_data(chip);
+	unsigned nreg = chip->ngpio / 32;
+	u8 reg = offset / 32;
+
+	return priv->reg_base + reg_type * nreg * 4 + reg * 4;
+}
+
+static void __iomem *gpio_reg_2bit(struct gpio_chip *chip, unsigned offset,
+				   enum GPIO_REG reg_type)
+{
+	struct intel_mid_gpio *priv = gpiochip_get_data(chip);
+	unsigned nreg = chip->ngpio / 32;
+	u8 reg = offset / 16;
+
+	return priv->reg_base + reg_type * nreg * 4 + reg * 4;
+}
+
+static int intel_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+	void __iomem *gafr = gpio_reg_2bit(chip, offset, GAFR);
+	u32 value = readl(gafr);
+	int shift = (offset % 16) << 1, af = (value >> shift) & 3;
+
+	if (af) {
+		value &= ~(3 << shift);
+		writel(value, gafr);
+	}
+	return 0;
+}
+
+static int intel_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	void __iomem *gplr = gpio_reg(chip, offset, GPLR);
+
+	return !!(readl(gplr) & BIT(offset % 32));
+}
+
+static void intel_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	void __iomem *gpsr, *gpcr;
+
+	if (value) {
+		gpsr = gpio_reg(chip, offset, GPSR);
+		writel(BIT(offset % 32), gpsr);
+	} else {
+		gpcr = gpio_reg(chip, offset, GPCR);
+		writel(BIT(offset % 32), gpcr);
+	}
+}
+
+static int intel_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct intel_mid_gpio *priv = gpiochip_get_data(chip);
+	void __iomem *gpdr = gpio_reg(chip, offset, GPDR);
+	u32 value;
+	unsigned long flags;
+
+	if (priv->pdev)
+		pm_runtime_get(&priv->pdev->dev);
+
+	spin_lock_irqsave(&priv->lock, flags);
+	value = readl(gpdr);
+	value &= ~BIT(offset % 32);
+	writel(value, gpdr);
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	if (priv->pdev)
+		pm_runtime_put(&priv->pdev->dev);
+
+	return 0;
+}
+
+static int intel_gpio_direction_output(struct gpio_chip *chip,
+			unsigned offset, int value)
+{
+	struct intel_mid_gpio *priv = gpiochip_get_data(chip);
+	void __iomem *gpdr = gpio_reg(chip, offset, GPDR);
+	unsigned long flags;
+
+	intel_gpio_set(chip, offset, value);
+
+	if (priv->pdev)
+		pm_runtime_get(&priv->pdev->dev);
+
+	spin_lock_irqsave(&priv->lock, flags);
+	value = readl(gpdr);
+	value |= BIT(offset % 32);
+	writel(value, gpdr);
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	if (priv->pdev)
+		pm_runtime_put(&priv->pdev->dev);
+
+	return 0;
+}
+
+static int intel_mid_irq_type(struct irq_data *d, unsigned type)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct intel_mid_gpio *priv = gpiochip_get_data(gc);
+	u32 gpio = irqd_to_hwirq(d);
+	unsigned long flags;
+	u32 value;
+	void __iomem *grer = gpio_reg(&priv->chip, gpio, GRER);
+	void __iomem *gfer = gpio_reg(&priv->chip, gpio, GFER);
+
+	if (gpio >= priv->chip.ngpio)
+		return -EINVAL;
+
+	if (priv->pdev)
+		pm_runtime_get(&priv->pdev->dev);
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (type & IRQ_TYPE_EDGE_RISING)
+		value = readl(grer) | BIT(gpio % 32);
+	else
+		value = readl(grer) & (~BIT(gpio % 32));
+	writel(value, grer);
+
+	if (type & IRQ_TYPE_EDGE_FALLING)
+		value = readl(gfer) | BIT(gpio % 32);
+	else
+		value = readl(gfer) & (~BIT(gpio % 32));
+	writel(value, gfer);
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	if (priv->pdev)
+		pm_runtime_put(&priv->pdev->dev);
+
+	return 0;
+}
+
+static void intel_mid_irq_unmask(struct irq_data *d)
+{
+}
+
+static void intel_mid_irq_mask(struct irq_data *d)
+{
+}
+
+static struct irq_chip intel_mid_irqchip = {
+	.name		= "INTEL_MID-GPIO",
+	.irq_mask	= intel_mid_irq_mask,
+	.irq_unmask	= intel_mid_irq_unmask,
+	.irq_set_type	= intel_mid_irq_type,
+};
+
+static const struct intel_mid_gpio_ddata gpio_lincroft = {
+	.ngpio = 64,
+};
+
+static const struct intel_mid_gpio_ddata gpio_penwell_aon = {
+	.ngpio = 96,
+	.chip_irq_type = INTEL_MID_IRQ_TYPE_EDGE,
+};
+
+static const struct intel_mid_gpio_ddata gpio_penwell_core = {
+	.ngpio = 96,
+	.chip_irq_type = INTEL_MID_IRQ_TYPE_EDGE,
+};
+
+static const struct intel_mid_gpio_ddata gpio_cloverview_aon = {
+	.ngpio = 96,
+	.chip_irq_type = INTEL_MID_IRQ_TYPE_EDGE | INTEL_MID_IRQ_TYPE_LEVEL,
+};
+
+static const struct intel_mid_gpio_ddata gpio_cloverview_core = {
+	.ngpio = 96,
+	.chip_irq_type = INTEL_MID_IRQ_TYPE_EDGE,
+};
+
+static const struct pci_device_id intel_gpio_ids[] = {
+	{
+		/* Lincroft */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x080f),
+		.driver_data = (kernel_ulong_t)&gpio_lincroft,
+	},
+	{
+		/* Penwell AON */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081f),
+		.driver_data = (kernel_ulong_t)&gpio_penwell_aon,
+	},
+	{
+		/* Penwell Core */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081a),
+		.driver_data = (kernel_ulong_t)&gpio_penwell_core,
+	},
+	{
+		/* Cloverview Aon */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x08eb),
+		.driver_data = (kernel_ulong_t)&gpio_cloverview_aon,
+	},
+	{
+		/* Cloverview Core */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x08f7),
+		.driver_data = (kernel_ulong_t)&gpio_cloverview_core,
+	},
+	{ }
+};
+
+static void intel_mid_irq_handler(struct irq_desc *desc)
+{
+	struct gpio_chip *gc = irq_desc_get_handler_data(desc);
+	struct intel_mid_gpio *priv = gpiochip_get_data(gc);
+	struct irq_data *data = irq_desc_get_irq_data(desc);
+	struct irq_chip *chip = irq_data_get_irq_chip(data);
+	u32 base, gpio, mask;
+	unsigned long pending;
+	void __iomem *gedr;
+
+	/* check GPIO controller to check which pin triggered the interrupt */
+	for (base = 0; base < priv->chip.ngpio; base += 32) {
+		gedr = gpio_reg(&priv->chip, base, GEDR);
+		while ((pending = readl(gedr))) {
+			gpio = __ffs(pending);
+			mask = BIT(gpio);
+			/* Clear before handling so we can't lose an edge */
+			writel(mask, gedr);
+			generic_handle_irq(irq_find_mapping(gc->irq.domain,
+							    base + gpio));
+		}
+	}
+
+	chip->irq_eoi(data);
+}
+
+static int intel_mid_irq_init_hw(struct gpio_chip *chip)
+{
+	struct intel_mid_gpio *priv = gpiochip_get_data(chip);
+	void __iomem *reg;
+	unsigned base;
+
+	for (base = 0; base < priv->chip.ngpio; base += 32) {
+		/* Clear the rising-edge detect register */
+		reg = gpio_reg(&priv->chip, base, GRER);
+		writel(0, reg);
+		/* Clear the falling-edge detect register */
+		reg = gpio_reg(&priv->chip, base, GFER);
+		writel(0, reg);
+		/* Clear the edge detect status register */
+		reg = gpio_reg(&priv->chip, base, GEDR);
+		writel(~0, reg);
+	}
+
+	return 0;
+}
+
+static int __maybe_unused intel_gpio_runtime_idle(struct device *dev)
+{
+	int err = pm_schedule_suspend(dev, 500);
+	return err ?: -EBUSY;
+}
+
+static const struct dev_pm_ops intel_gpio_pm_ops = {
+	SET_RUNTIME_PM_OPS(NULL, NULL, intel_gpio_runtime_idle)
+};
+
+static int intel_gpio_probe(struct pci_dev *pdev,
+			  const struct pci_device_id *id)
+{
+	void __iomem *base;
+	struct intel_mid_gpio *priv;
+	u32 gpio_base;
+	u32 irq_base;
+	int retval;
+	struct gpio_irq_chip *girq;
+	struct intel_mid_gpio_ddata *ddata =
+				(struct intel_mid_gpio_ddata *)id->driver_data;
+
+	retval = pcim_enable_device(pdev);
+	if (retval)
+		return retval;
+
+	retval = pcim_iomap_regions(pdev, 1 << 0 | 1 << 1, pci_name(pdev));
+	if (retval) {
+		dev_err(&pdev->dev, "I/O memory mapping error\n");
+		return retval;
+	}
+
+	base = pcim_iomap_table(pdev)[1];
+
+	irq_base = readl(base);
+	gpio_base = readl(sizeof(u32) + base);
+
+	/* release the IO mapping, since we already get the info from bar1 */
+	pcim_iounmap_regions(pdev, 1 << 1);
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->reg_base = pcim_iomap_table(pdev)[0];
+	priv->chip.label = dev_name(&pdev->dev);
+	priv->chip.parent = &pdev->dev;
+	priv->chip.request = intel_gpio_request;
+	priv->chip.direction_input = intel_gpio_direction_input;
+	priv->chip.direction_output = intel_gpio_direction_output;
+	priv->chip.get = intel_gpio_get;
+	priv->chip.set = intel_gpio_set;
+	priv->chip.base = gpio_base;
+	priv->chip.ngpio = ddata->ngpio;
+	priv->chip.can_sleep = false;
+	priv->pdev = pdev;
+
+	spin_lock_init(&priv->lock);
+
+	girq = &priv->chip.irq;
+	girq->chip = &intel_mid_irqchip;
+	girq->init_hw = intel_mid_irq_init_hw;
+	girq->parent_handler = intel_mid_irq_handler;
+	girq->num_parents = 1;
+	girq->parents = devm_kcalloc(&pdev->dev, girq->num_parents,
+				     sizeof(*girq->parents),
+				     GFP_KERNEL);
+	if (!girq->parents)
+		return -ENOMEM;
+	girq->parents[0] = pdev->irq;
+	girq->first = irq_base;
+	girq->default_type = IRQ_TYPE_NONE;
+	girq->handler = handle_simple_irq;
+
+	pci_set_drvdata(pdev, priv);
+
+	retval = devm_gpiochip_add_data(&pdev->dev, &priv->chip, priv);
+	if (retval) {
+		dev_err(&pdev->dev, "gpiochip_add error %d\n", retval);
+		return retval;
+	}
+
+	pm_runtime_put_noidle(&pdev->dev);
+	pm_runtime_allow(&pdev->dev);
+
+	return 0;
+}
+
+static struct pci_driver intel_gpio_driver = {
+	.name		= "intel_mid_gpio",
+	.id_table	= intel_gpio_ids,
+	.probe		= intel_gpio_probe,
+	.driver		= {
+		.pm	= &intel_gpio_pm_ops,
+	},
+};
+
+builtin_pci_driver(intel_gpio_driver);
diff --git a/drivers/gpio/gpio-iop.c b/drivers/gpio/gpio-iop.c
new file mode 100644
index 000000000..7390b5ca0
--- /dev/null
+++ b/drivers/gpio/gpio-iop.c
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * arch/arm/plat-iop/gpio.c
+ * GPIO handling for Intel IOP3xx processors.
+ *
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ */
+
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/gpio/driver.h>
+#include <linux/platform_device.h>
+
+#define IOP3XX_GPOE	0x0000
+#define IOP3XX_GPID	0x0004
+#define IOP3XX_GPOD	0x0008
+
+static int iop3xx_gpio_probe(struct platform_device *pdev)
+{
+	struct gpio_chip *gc;
+	void __iomem *base;
+	int err;
+
+	gc = devm_kzalloc(&pdev->dev, sizeof(*gc), GFP_KERNEL);
+	if (!gc)
+		return -ENOMEM;
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	err = bgpio_init(gc, &pdev->dev, 1, base + IOP3XX_GPID,
+			 base + IOP3XX_GPOD, NULL, NULL, base + IOP3XX_GPOE, 0);
+	if (err)
+		return err;
+
+	gc->base = 0;
+	gc->owner = THIS_MODULE;
+	gc->label = "gpio-iop";
+
+	return devm_gpiochip_add_data(&pdev->dev, gc, NULL);
+}
+
+static struct platform_driver iop3xx_gpio_driver = {
+	.driver = {
+		.name = "gpio-iop",
+	},
+	.probe = iop3xx_gpio_probe,
+};
+
+static int __init iop3xx_gpio_init(void)
+{
+	return platform_driver_register(&iop3xx_gpio_driver);
+}
+arch_initcall(iop3xx_gpio_init);
+
+MODULE_DESCRIPTION("GPIO handling for Intel IOP3xx processors");
+MODULE_AUTHOR("Lennert Buytenhek <buytenh@wantstofly.org>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/gpio-it87.c b/drivers/gpio/gpio-it87.c
new file mode 100644
index 000000000..8f1be3495
--- /dev/null
+++ b/drivers/gpio/gpio-it87.c
@@ -0,0 +1,420 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  GPIO interface for IT87xx Super I/O chips
+ *
+ *  Author: Diego Elio Pettenò <flameeyes@flameeyes.eu>
+ *  Copyright (c) 2017 Google, Inc.
+ *
+ *  Based on it87_wdt.c     by Oliver Schuster
+ *           gpio-it8761e.c by Denis Turischev
+ *           gpio-stmpe.c   by Rabin Vincent
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/gpio/driver.h>
+
+/* Chip Id numbers */
+#define NO_DEV_ID	0xffff
+#define IT8613_ID	0x8613
+#define IT8620_ID	0x8620
+#define IT8628_ID	0x8628
+#define IT8718_ID       0x8718
+#define IT8728_ID	0x8728
+#define IT8732_ID	0x8732
+#define IT8761_ID	0x8761
+#define IT8772_ID	0x8772
+#define IT8786_ID	0x8786
+
+/* IO Ports */
+#define REG		0x2e
+#define VAL		0x2f
+
+/* Logical device Numbers LDN */
+#define GPIO		0x07
+
+/* Configuration Registers and Functions */
+#define LDNREG		0x07
+#define CHIPID		0x20
+#define CHIPREV		0x22
+
+/**
+ * struct it87_gpio - it87-specific GPIO chip
+ * @chip: the underlying gpio_chip structure
+ * @lock: a lock to avoid races between operations
+ * @io_base: base address for gpio ports
+ * @io_size: size of the port rage starting from io_base.
+ * @output_base: Super I/O register address for Output Enable register
+ * @simple_base: Super I/O 'Simple I/O' Enable register
+ * @simple_size: Super IO 'Simple I/O' Enable register size; this is
+ *	required because IT87xx chips might only provide Simple I/O
+ *	switches on a subset of lines, whereas the others keep the
+ *	same status all time.
+ */
+struct it87_gpio {
+	struct gpio_chip chip;
+	spinlock_t lock;
+	u16 io_base;
+	u16 io_size;
+	u8 output_base;
+	u8 simple_base;
+	u8 simple_size;
+};
+
+static struct it87_gpio it87_gpio_chip = {
+	.lock = __SPIN_LOCK_UNLOCKED(it87_gpio_chip.lock),
+};
+
+/* Superio chip access functions; copied from wdt_it87 */
+
+static inline int superio_enter(void)
+{
+	/*
+	 * Try to reserve REG and REG + 1 for exclusive access.
+	 */
+	if (!request_muxed_region(REG, 2, KBUILD_MODNAME))
+		return -EBUSY;
+
+	outb(0x87, REG);
+	outb(0x01, REG);
+	outb(0x55, REG);
+	outb(0x55, REG);
+	return 0;
+}
+
+static inline void superio_exit(void)
+{
+	outb(0x02, REG);
+	outb(0x02, VAL);
+	release_region(REG, 2);
+}
+
+static inline void superio_select(int ldn)
+{
+	outb(LDNREG, REG);
+	outb(ldn, VAL);
+}
+
+static inline int superio_inb(int reg)
+{
+	outb(reg, REG);
+	return inb(VAL);
+}
+
+static inline void superio_outb(int val, int reg)
+{
+	outb(reg, REG);
+	outb(val, VAL);
+}
+
+static inline int superio_inw(int reg)
+{
+	int val;
+
+	outb(reg++, REG);
+	val = inb(VAL) << 8;
+	outb(reg, REG);
+	val |= inb(VAL);
+	return val;
+}
+
+static inline void superio_outw(int val, int reg)
+{
+	outb(reg++, REG);
+	outb(val >> 8, VAL);
+	outb(reg, REG);
+	outb(val, VAL);
+}
+
+static inline void superio_set_mask(int mask, int reg)
+{
+	u8 curr_val = superio_inb(reg);
+	u8 new_val = curr_val | mask;
+
+	if (curr_val != new_val)
+		superio_outb(new_val, reg);
+}
+
+static inline void superio_clear_mask(int mask, int reg)
+{
+	u8 curr_val = superio_inb(reg);
+	u8 new_val = curr_val & ~mask;
+
+	if (curr_val != new_val)
+		superio_outb(new_val, reg);
+}
+
+static int it87_gpio_request(struct gpio_chip *chip, unsigned gpio_num)
+{
+	u8 mask, group;
+	int rc = 0;
+	struct it87_gpio *it87_gpio = gpiochip_get_data(chip);
+
+	mask = 1 << (gpio_num % 8);
+	group = (gpio_num / 8);
+
+	spin_lock(&it87_gpio->lock);
+
+	rc = superio_enter();
+	if (rc)
+		goto exit;
+
+	/* not all the IT87xx chips support Simple I/O and not all of
+	 * them allow all the lines to be set/unset to Simple I/O.
+	 */
+	if (group < it87_gpio->simple_size)
+		superio_set_mask(mask, group + it87_gpio->simple_base);
+
+	/* clear output enable, setting the pin to input, as all the
+	 * newly-exported GPIO interfaces are set to input.
+	 */
+	superio_clear_mask(mask, group + it87_gpio->output_base);
+
+	superio_exit();
+
+exit:
+	spin_unlock(&it87_gpio->lock);
+	return rc;
+}
+
+static int it87_gpio_get(struct gpio_chip *chip, unsigned gpio_num)
+{
+	u16 reg;
+	u8 mask;
+	struct it87_gpio *it87_gpio = gpiochip_get_data(chip);
+
+	mask = 1 << (gpio_num % 8);
+	reg = (gpio_num / 8) + it87_gpio->io_base;
+
+	return !!(inb(reg) & mask);
+}
+
+static int it87_gpio_direction_in(struct gpio_chip *chip, unsigned gpio_num)
+{
+	u8 mask, group;
+	int rc = 0;
+	struct it87_gpio *it87_gpio = gpiochip_get_data(chip);
+
+	mask = 1 << (gpio_num % 8);
+	group = (gpio_num / 8);
+
+	spin_lock(&it87_gpio->lock);
+
+	rc = superio_enter();
+	if (rc)
+		goto exit;
+
+	/* clear the output enable bit */
+	superio_clear_mask(mask, group + it87_gpio->output_base);
+
+	superio_exit();
+
+exit:
+	spin_unlock(&it87_gpio->lock);
+	return rc;
+}
+
+static void it87_gpio_set(struct gpio_chip *chip,
+			  unsigned gpio_num, int val)
+{
+	u8 mask, curr_vals;
+	u16 reg;
+	struct it87_gpio *it87_gpio = gpiochip_get_data(chip);
+
+	mask = 1 << (gpio_num % 8);
+	reg = (gpio_num / 8) + it87_gpio->io_base;
+
+	curr_vals = inb(reg);
+	if (val)
+		outb(curr_vals | mask, reg);
+	else
+		outb(curr_vals & ~mask, reg);
+}
+
+static int it87_gpio_direction_out(struct gpio_chip *chip,
+				   unsigned gpio_num, int val)
+{
+	u8 mask, group;
+	int rc = 0;
+	struct it87_gpio *it87_gpio = gpiochip_get_data(chip);
+
+	mask = 1 << (gpio_num % 8);
+	group = (gpio_num / 8);
+
+	spin_lock(&it87_gpio->lock);
+
+	rc = superio_enter();
+	if (rc)
+		goto exit;
+
+	/* set the output enable bit */
+	superio_set_mask(mask, group + it87_gpio->output_base);
+
+	it87_gpio_set(chip, gpio_num, val);
+
+	superio_exit();
+
+exit:
+	spin_unlock(&it87_gpio->lock);
+	return rc;
+}
+
+static const struct gpio_chip it87_template_chip = {
+	.label			= KBUILD_MODNAME,
+	.owner			= THIS_MODULE,
+	.request		= it87_gpio_request,
+	.get			= it87_gpio_get,
+	.direction_input	= it87_gpio_direction_in,
+	.set			= it87_gpio_set,
+	.direction_output	= it87_gpio_direction_out,
+	.base			= -1
+};
+
+static int __init it87_gpio_init(void)
+{
+	int rc = 0, i;
+	u16 chip_type;
+	u8 chip_rev, gpio_ba_reg;
+	char *labels, **labels_table;
+
+	struct it87_gpio *it87_gpio = &it87_gpio_chip;
+
+	rc = superio_enter();
+	if (rc)
+		return rc;
+
+	chip_type = superio_inw(CHIPID);
+	chip_rev  = superio_inb(CHIPREV) & 0x0f;
+	superio_exit();
+
+	it87_gpio->chip = it87_template_chip;
+
+	switch (chip_type) {
+	case IT8613_ID:
+		gpio_ba_reg = 0x62;
+		it87_gpio->io_size = 8;  /* it8613 only needs 6, use 8 for alignment */
+		it87_gpio->output_base = 0xc8;
+		it87_gpio->simple_base = 0xc0;
+		it87_gpio->simple_size = 6;
+		it87_gpio->chip.ngpio = 64;  /* has 48, use 64 for convenient calc */
+		break;
+	case IT8620_ID:
+	case IT8628_ID:
+		gpio_ba_reg = 0x62;
+		it87_gpio->io_size = 11;
+		it87_gpio->output_base = 0xc8;
+		it87_gpio->simple_size = 0;
+		it87_gpio->chip.ngpio = 64;
+		break;
+	case IT8718_ID:
+	case IT8728_ID:
+	case IT8732_ID:
+	case IT8772_ID:
+	case IT8786_ID:
+		gpio_ba_reg = 0x62;
+		it87_gpio->io_size = 8;
+		it87_gpio->output_base = 0xc8;
+		it87_gpio->simple_base = 0xc0;
+		it87_gpio->simple_size = 5;
+		it87_gpio->chip.ngpio = 64;
+		break;
+	case IT8761_ID:
+		gpio_ba_reg = 0x60;
+		it87_gpio->io_size = 4;
+		it87_gpio->output_base = 0xf0;
+		it87_gpio->simple_size = 0;
+		it87_gpio->chip.ngpio = 16;
+		break;
+	case NO_DEV_ID:
+		pr_err("no device\n");
+		return -ENODEV;
+	default:
+		pr_err("Unknown Chip found, Chip %04x Revision %x\n",
+		       chip_type, chip_rev);
+		return -ENODEV;
+	}
+
+	rc = superio_enter();
+	if (rc)
+		return rc;
+
+	superio_select(GPIO);
+
+	/* fetch GPIO base address */
+	it87_gpio->io_base = superio_inw(gpio_ba_reg);
+
+	superio_exit();
+
+	pr_info("Found Chip IT%04x rev %x. %u GPIO lines starting at %04xh\n",
+		chip_type, chip_rev, it87_gpio->chip.ngpio,
+		it87_gpio->io_base);
+
+	if (!request_region(it87_gpio->io_base, it87_gpio->io_size,
+							KBUILD_MODNAME))
+		return -EBUSY;
+
+	/* Set up aliases for the GPIO connection.
+	 *
+	 * ITE documentation for recent chips such as the IT8728F
+	 * refers to the GPIO lines as GPxy, with a coordinates system
+	 * where x is the GPIO group (starting from 1) and y is the
+	 * bit within the group.
+	 *
+	 * By creating these aliases, we make it easier to understand
+	 * to which GPIO pin we're referring to.
+	 */
+	labels = kcalloc(it87_gpio->chip.ngpio, sizeof("it87_gpXY"),
+								GFP_KERNEL);
+	labels_table = kcalloc(it87_gpio->chip.ngpio, sizeof(const char *),
+								GFP_KERNEL);
+
+	if (!labels || !labels_table) {
+		rc = -ENOMEM;
+		goto labels_free;
+	}
+
+	for (i = 0; i < it87_gpio->chip.ngpio; i++) {
+		char *label = &labels[i * sizeof("it87_gpXY")];
+
+		sprintf(label, "it87_gp%u%u", 1+(i/8), i%8);
+		labels_table[i] = label;
+	}
+
+	it87_gpio->chip.names = (const char *const*)labels_table;
+
+	rc = gpiochip_add_data(&it87_gpio->chip, it87_gpio);
+	if (rc)
+		goto labels_free;
+
+	return 0;
+
+labels_free:
+	kfree(labels_table);
+	kfree(labels);
+	release_region(it87_gpio->io_base, it87_gpio->io_size);
+	return rc;
+}
+
+static void __exit it87_gpio_exit(void)
+{
+	struct it87_gpio *it87_gpio = &it87_gpio_chip;
+
+	gpiochip_remove(&it87_gpio->chip);
+	release_region(it87_gpio->io_base, it87_gpio->io_size);
+	kfree(it87_gpio->chip.names[0]);
+	kfree(it87_gpio->chip.names);
+}
+
+module_init(it87_gpio_init);
+module_exit(it87_gpio_exit);
+
+MODULE_AUTHOR("Diego Elio Pettenò <flameeyes@flameeyes.eu>");
+MODULE_DESCRIPTION("GPIO interface for IT87xx Super I/O chips");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/gpio-ixp4xx.c b/drivers/gpio/gpio-ixp4xx.c
new file mode 100644
index 000000000..b3b050604
--- /dev/null
+++ b/drivers/gpio/gpio-ixp4xx.c
@@ -0,0 +1,319 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// IXP4 GPIO driver
+// Copyright (C) 2019 Linus Walleij <linus.walleij@linaro.org>
+//
+// based on previous work and know-how from:
+// Deepak Saxena <dsaxena@plexity.net>
+
+#include <linux/gpio/driver.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/irqchip.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/bitops.h>
+/* Include that go away with DT transition */
+#include <linux/irqchip/irq-ixp4xx.h>
+
+#include <asm/mach-types.h>
+
+#define IXP4XX_REG_GPOUT	0x00
+#define IXP4XX_REG_GPOE		0x04
+#define IXP4XX_REG_GPIN		0x08
+#define IXP4XX_REG_GPIS		0x0C
+#define IXP4XX_REG_GPIT1	0x10
+#define IXP4XX_REG_GPIT2	0x14
+#define IXP4XX_REG_GPCLK	0x18
+#define IXP4XX_REG_GPDBSEL	0x1C
+
+/*
+ * The hardware uses 3 bits to indicate interrupt "style".
+ * we clear and set these three bits accordingly. The lower 24
+ * bits in two registers (GPIT1 and GPIT2) are used to set up
+ * the style for 8 lines each for a total of 16 GPIO lines.
+ */
+#define IXP4XX_GPIO_STYLE_ACTIVE_HIGH	0x0
+#define IXP4XX_GPIO_STYLE_ACTIVE_LOW	0x1
+#define IXP4XX_GPIO_STYLE_RISING_EDGE	0x2
+#define IXP4XX_GPIO_STYLE_FALLING_EDGE	0x3
+#define IXP4XX_GPIO_STYLE_TRANSITIONAL	0x4
+#define IXP4XX_GPIO_STYLE_MASK		GENMASK(2, 0)
+#define IXP4XX_GPIO_STYLE_SIZE		3
+
+/**
+ * struct ixp4xx_gpio - IXP4 GPIO state container
+ * @dev: containing device for this instance
+ * @fwnode: the fwnode for this GPIO chip
+ * @gc: gpiochip for this instance
+ * @base: remapped I/O-memory base
+ * @irq_edge: Each bit represents an IRQ: 1: edge-triggered,
+ * 0: level triggered
+ */
+struct ixp4xx_gpio {
+	struct device *dev;
+	struct fwnode_handle *fwnode;
+	struct gpio_chip gc;
+	void __iomem *base;
+	unsigned long long irq_edge;
+};
+
+static void ixp4xx_gpio_irq_ack(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct ixp4xx_gpio *g = gpiochip_get_data(gc);
+
+	__raw_writel(BIT(d->hwirq), g->base + IXP4XX_REG_GPIS);
+}
+
+static void ixp4xx_gpio_irq_unmask(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct ixp4xx_gpio *g = gpiochip_get_data(gc);
+
+	/* ACK when unmasking if not edge-triggered */
+	if (!(g->irq_edge & BIT(d->hwirq)))
+		ixp4xx_gpio_irq_ack(d);
+
+	irq_chip_unmask_parent(d);
+}
+
+static int ixp4xx_gpio_irq_set_type(struct irq_data *d, unsigned int type)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct ixp4xx_gpio *g = gpiochip_get_data(gc);
+	int line = d->hwirq;
+	unsigned long flags;
+	u32 int_style;
+	u32 int_reg;
+	u32 val;
+
+	switch (type) {
+	case IRQ_TYPE_EDGE_BOTH:
+		irq_set_handler_locked(d, handle_edge_irq);
+		int_style = IXP4XX_GPIO_STYLE_TRANSITIONAL;
+		g->irq_edge |= BIT(d->hwirq);
+		break;
+	case IRQ_TYPE_EDGE_RISING:
+		irq_set_handler_locked(d, handle_edge_irq);
+		int_style = IXP4XX_GPIO_STYLE_RISING_EDGE;
+		g->irq_edge |= BIT(d->hwirq);
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		irq_set_handler_locked(d, handle_edge_irq);
+		int_style = IXP4XX_GPIO_STYLE_FALLING_EDGE;
+		g->irq_edge |= BIT(d->hwirq);
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		irq_set_handler_locked(d, handle_level_irq);
+		int_style = IXP4XX_GPIO_STYLE_ACTIVE_HIGH;
+		g->irq_edge &= ~BIT(d->hwirq);
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		irq_set_handler_locked(d, handle_level_irq);
+		int_style = IXP4XX_GPIO_STYLE_ACTIVE_LOW;
+		g->irq_edge &= ~BIT(d->hwirq);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (line >= 8) {
+		/* pins 8-15 */
+		line -= 8;
+		int_reg = IXP4XX_REG_GPIT2;
+	} else {
+		/* pins 0-7 */
+		int_reg = IXP4XX_REG_GPIT1;
+	}
+
+	spin_lock_irqsave(&g->gc.bgpio_lock, flags);
+
+	/* Clear the style for the appropriate pin */
+	val = __raw_readl(g->base + int_reg);
+	val &= ~(IXP4XX_GPIO_STYLE_MASK << (line * IXP4XX_GPIO_STYLE_SIZE));
+	__raw_writel(val, g->base + int_reg);
+
+	__raw_writel(BIT(line), g->base + IXP4XX_REG_GPIS);
+
+	/* Set the new style */
+	val = __raw_readl(g->base + int_reg);
+	val |= (int_style << (line * IXP4XX_GPIO_STYLE_SIZE));
+	__raw_writel(val, g->base + int_reg);
+
+	/* Force-configure this line as an input */
+	val = __raw_readl(g->base + IXP4XX_REG_GPOE);
+	val |= BIT(d->hwirq);
+	__raw_writel(val, g->base + IXP4XX_REG_GPOE);
+
+	spin_unlock_irqrestore(&g->gc.bgpio_lock, flags);
+
+	/* This parent only accept level high (asserted) */
+	return irq_chip_set_type_parent(d, IRQ_TYPE_LEVEL_HIGH);
+}
+
+static struct irq_chip ixp4xx_gpio_irqchip = {
+	.name = "IXP4GPIO",
+	.irq_ack = ixp4xx_gpio_irq_ack,
+	.irq_mask = irq_chip_mask_parent,
+	.irq_unmask = ixp4xx_gpio_irq_unmask,
+	.irq_set_type = ixp4xx_gpio_irq_set_type,
+};
+
+static int ixp4xx_gpio_child_to_parent_hwirq(struct gpio_chip *gc,
+					     unsigned int child,
+					     unsigned int child_type,
+					     unsigned int *parent,
+					     unsigned int *parent_type)
+{
+	/* All these interrupts are level high in the CPU */
+	*parent_type = IRQ_TYPE_LEVEL_HIGH;
+
+	/* GPIO lines 0..12 have dedicated IRQs */
+	if (child == 0) {
+		*parent = 6;
+		return 0;
+	}
+	if (child == 1) {
+		*parent = 7;
+		return 0;
+	}
+	if (child >= 2 && child <= 12) {
+		*parent = child + 17;
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static int ixp4xx_gpio_probe(struct platform_device *pdev)
+{
+	unsigned long flags;
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct irq_domain *parent;
+	struct resource *res;
+	struct ixp4xx_gpio *g;
+	struct gpio_irq_chip *girq;
+	int ret;
+
+	g = devm_kzalloc(dev, sizeof(*g), GFP_KERNEL);
+	if (!g)
+		return -ENOMEM;
+	g->dev = dev;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	g->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(g->base))
+		return PTR_ERR(g->base);
+
+	/*
+	 * When we convert to device tree we will simply look up the
+	 * parent irqdomain using irq_find_host(parent) as parent comes
+	 * from IRQCHIP_DECLARE(), then use of_node_to_fwnode() to get
+	 * the fwnode. For now we need this boardfile style code.
+	 */
+	if (np) {
+		struct device_node *irq_parent;
+
+		irq_parent = of_irq_find_parent(np);
+		if (!irq_parent) {
+			dev_err(dev, "no IRQ parent node\n");
+			return -ENODEV;
+		}
+		parent = irq_find_host(irq_parent);
+		if (!parent) {
+			dev_err(dev, "no IRQ parent domain\n");
+			return -ENODEV;
+		}
+		g->fwnode = of_node_to_fwnode(np);
+	} else {
+		parent = ixp4xx_get_irq_domain();
+		g->fwnode = irq_domain_alloc_fwnode(&res->start);
+		if (!g->fwnode) {
+			dev_err(dev, "no domain base\n");
+			return -ENODEV;
+		}
+	}
+
+	/*
+	 * Make sure GPIO 14 and 15 are NOT used as clocks but GPIO on
+	 * specific machines.
+	 */
+	if (machine_is_dsmg600() || machine_is_nas100d())
+		__raw_writel(0x0, g->base + IXP4XX_REG_GPCLK);
+
+	/*
+	 * This is a very special big-endian ARM issue: when the IXP4xx is
+	 * run in big endian mode, all registers in the machine are switched
+	 * around to the CPU-native endianness. As you see mostly in the
+	 * driver we use __raw_readl()/__raw_writel() to access the registers
+	 * in the appropriate order. With the GPIO library we need to specify
+	 * byte order explicitly, so this flag needs to be set when compiling
+	 * for big endian.
+	 */
+#if defined(CONFIG_CPU_BIG_ENDIAN)
+	flags = BGPIOF_BIG_ENDIAN_BYTE_ORDER;
+#else
+	flags = 0;
+#endif
+
+	/* Populate and register gpio chip */
+	ret = bgpio_init(&g->gc, dev, 4,
+			 g->base + IXP4XX_REG_GPIN,
+			 g->base + IXP4XX_REG_GPOUT,
+			 NULL,
+			 NULL,
+			 g->base + IXP4XX_REG_GPOE,
+			 flags);
+	if (ret) {
+		dev_err(dev, "unable to init generic GPIO\n");
+		return ret;
+	}
+	g->gc.ngpio = 16;
+	g->gc.label = "IXP4XX_GPIO_CHIP";
+	/*
+	 * TODO: when we have migrated to device tree and all GPIOs
+	 * are fetched using phandles, set this to -1 to get rid of
+	 * the fixed gpiochip base.
+	 */
+	g->gc.base = 0;
+	g->gc.parent = &pdev->dev;
+	g->gc.owner = THIS_MODULE;
+
+	girq = &g->gc.irq;
+	girq->chip = &ixp4xx_gpio_irqchip;
+	girq->fwnode = g->fwnode;
+	girq->parent_domain = parent;
+	girq->child_to_parent_hwirq = ixp4xx_gpio_child_to_parent_hwirq;
+	girq->handler = handle_bad_irq;
+	girq->default_type = IRQ_TYPE_NONE;
+
+	ret = devm_gpiochip_add_data(dev, &g->gc, g);
+	if (ret) {
+		dev_err(dev, "failed to add SoC gpiochip\n");
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, g);
+	dev_info(dev, "IXP4 GPIO registered\n");
+
+	return 0;
+}
+
+static const struct of_device_id ixp4xx_gpio_of_match[] = {
+	{
+		.compatible = "intel,ixp4xx-gpio",
+	},
+	{},
+};
+
+
+static struct platform_driver ixp4xx_gpio_driver = {
+	.driver = {
+		.name		= "ixp4xx-gpio",
+		.of_match_table = of_match_ptr(ixp4xx_gpio_of_match),
+	},
+	.probe = ixp4xx_gpio_probe,
+};
+builtin_platform_driver(ixp4xx_gpio_driver);
diff --git a/drivers/gpio/gpio-janz-ttl.c b/drivers/gpio/gpio-janz-ttl.c
new file mode 100644
index 000000000..cdf50e4ea
--- /dev/null
+++ b/drivers/gpio/gpio-janz-ttl.c
@@ -0,0 +1,200 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Janz MODULbus VMOD-TTL GPIO Driver
+ *
+ * Copyright (c) 2010 Ira W. Snyder <iws@ovro.caltech.edu>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio/driver.h>
+#include <linux/slab.h>
+#include <linux/bitops.h>
+
+#include <linux/mfd/janz.h>
+
+#define DRV_NAME "janz-ttl"
+
+#define PORTA_DIRECTION		0x23
+#define PORTB_DIRECTION		0x2B
+#define PORTC_DIRECTION		0x06
+#define PORTA_IOCTL		0x24
+#define PORTB_IOCTL		0x2C
+#define PORTC_IOCTL		0x07
+
+#define MASTER_INT_CTL		0x00
+#define MASTER_CONF_CTL		0x01
+
+#define CONF_PAE		BIT(2)
+#define CONF_PBE		BIT(7)
+#define CONF_PCE		BIT(4)
+
+struct ttl_control_regs {
+	__be16 portc;
+	__be16 portb;
+	__be16 porta;
+	__be16 control;
+};
+
+struct ttl_module {
+	struct gpio_chip gpio;
+
+	/* base address of registers */
+	struct ttl_control_regs __iomem *regs;
+
+	u8 portc_shadow;
+	u8 portb_shadow;
+	u8 porta_shadow;
+
+	spinlock_t lock;
+};
+
+static int ttl_get_value(struct gpio_chip *gpio, unsigned offset)
+{
+	struct ttl_module *mod = dev_get_drvdata(gpio->parent);
+	u8 *shadow;
+	int ret;
+
+	if (offset < 8) {
+		shadow = &mod->porta_shadow;
+	} else if (offset < 16) {
+		shadow = &mod->portb_shadow;
+		offset -= 8;
+	} else {
+		shadow = &mod->portc_shadow;
+		offset -= 16;
+	}
+
+	spin_lock(&mod->lock);
+	ret = *shadow & BIT(offset);
+	spin_unlock(&mod->lock);
+	return !!ret;
+}
+
+static void ttl_set_value(struct gpio_chip *gpio, unsigned offset, int value)
+{
+	struct ttl_module *mod = dev_get_drvdata(gpio->parent);
+	void __iomem *port;
+	u8 *shadow;
+
+	if (offset < 8) {
+		port = &mod->regs->porta;
+		shadow = &mod->porta_shadow;
+	} else if (offset < 16) {
+		port = &mod->regs->portb;
+		shadow = &mod->portb_shadow;
+		offset -= 8;
+	} else {
+		port = &mod->regs->portc;
+		shadow = &mod->portc_shadow;
+		offset -= 16;
+	}
+
+	spin_lock(&mod->lock);
+	if (value)
+		*shadow |= BIT(offset);
+	else
+		*shadow &= ~BIT(offset);
+
+	iowrite16be(*shadow, port);
+	spin_unlock(&mod->lock);
+}
+
+static void ttl_write_reg(struct ttl_module *mod, u8 reg, u16 val)
+{
+	iowrite16be(reg, &mod->regs->control);
+	iowrite16be(val, &mod->regs->control);
+}
+
+static void ttl_setup_device(struct ttl_module *mod)
+{
+	/* reset the device to a known state */
+	iowrite16be(0x0000, &mod->regs->control);
+	iowrite16be(0x0001, &mod->regs->control);
+	iowrite16be(0x0000, &mod->regs->control);
+
+	/* put all ports in open-drain mode */
+	ttl_write_reg(mod, PORTA_IOCTL, 0x00ff);
+	ttl_write_reg(mod, PORTB_IOCTL, 0x00ff);
+	ttl_write_reg(mod, PORTC_IOCTL, 0x000f);
+
+	/* set all ports as outputs */
+	ttl_write_reg(mod, PORTA_DIRECTION, 0x0000);
+	ttl_write_reg(mod, PORTB_DIRECTION, 0x0000);
+	ttl_write_reg(mod, PORTC_DIRECTION, 0x0000);
+
+	/* set all ports to drive zeroes */
+	iowrite16be(0x0000, &mod->regs->porta);
+	iowrite16be(0x0000, &mod->regs->portb);
+	iowrite16be(0x0000, &mod->regs->portc);
+
+	/* enable all ports */
+	ttl_write_reg(mod, MASTER_CONF_CTL, CONF_PAE | CONF_PBE | CONF_PCE);
+}
+
+static int ttl_probe(struct platform_device *pdev)
+{
+	struct janz_platform_data *pdata;
+	struct ttl_module *mod;
+	struct gpio_chip *gpio;
+	int ret;
+
+	pdata = dev_get_platdata(&pdev->dev);
+	if (!pdata) {
+		dev_err(&pdev->dev, "no platform data\n");
+		return -ENXIO;
+	}
+
+	mod = devm_kzalloc(&pdev->dev, sizeof(*mod), GFP_KERNEL);
+	if (!mod)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, mod);
+	spin_lock_init(&mod->lock);
+
+	/* get access to the MODULbus registers for this module */
+	mod->regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(mod->regs))
+		return PTR_ERR(mod->regs);
+
+	ttl_setup_device(mod);
+
+	/* Initialize the GPIO data structures */
+	gpio = &mod->gpio;
+	gpio->parent = &pdev->dev;
+	gpio->label = pdev->name;
+	gpio->get = ttl_get_value;
+	gpio->set = ttl_set_value;
+	gpio->owner = THIS_MODULE;
+
+	/* request dynamic allocation */
+	gpio->base = -1;
+	gpio->ngpio = 20;
+
+	ret = devm_gpiochip_add_data(&pdev->dev, gpio, NULL);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to add GPIO chip\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static struct platform_driver ttl_driver = {
+	.driver		= {
+		.name	= DRV_NAME,
+	},
+	.probe		= ttl_probe,
+};
+
+module_platform_driver(ttl_driver);
+
+MODULE_AUTHOR("Ira W. Snyder <iws@ovro.caltech.edu>");
+MODULE_DESCRIPTION("Janz MODULbus VMOD-TTL Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:janz-ttl");
diff --git a/drivers/gpio/gpio-kempld.c b/drivers/gpio/gpio-kempld.c
new file mode 100644
index 000000000..4ea15f08e
--- /dev/null
+++ b/drivers/gpio/gpio-kempld.c
@@ -0,0 +1,200 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Kontron PLD GPIO driver
+ *
+ * Copyright (c) 2010-2013 Kontron Europe GmbH
+ * Author: Michael Brunner <michael.brunner@kontron.com>
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/bitops.h>
+#include <linux/errno.h>
+#include <linux/platform_device.h>
+#include <linux/gpio/driver.h>
+#include <linux/mfd/kempld.h>
+
+#define KEMPLD_GPIO_MAX_NUM		16
+#define KEMPLD_GPIO_MASK(x)		(BIT((x) % 8))
+#define KEMPLD_GPIO_DIR_NUM(x)		(0x40 + (x) / 8)
+#define KEMPLD_GPIO_LVL_NUM(x)		(0x42 + (x) / 8)
+#define KEMPLD_GPIO_EVT_LVL_EDGE	0x46
+#define KEMPLD_GPIO_IEN			0x4A
+
+struct kempld_gpio_data {
+	struct gpio_chip		chip;
+	struct kempld_device_data	*pld;
+};
+
+/*
+ * Set or clear GPIO bit
+ * kempld_get_mutex must be called prior to calling this function.
+ */
+static void kempld_gpio_bitop(struct kempld_device_data *pld,
+			      u8 reg, u8 bit, u8 val)
+{
+	u8 status;
+
+	status = kempld_read8(pld, reg);
+	if (val)
+		status |= KEMPLD_GPIO_MASK(bit);
+	else
+		status &= ~KEMPLD_GPIO_MASK(bit);
+	kempld_write8(pld, reg, status);
+}
+
+static int kempld_gpio_get_bit(struct kempld_device_data *pld, u8 reg, u8 bit)
+{
+	u8 status;
+
+	kempld_get_mutex(pld);
+	status = kempld_read8(pld, reg);
+	kempld_release_mutex(pld);
+
+	return !!(status & KEMPLD_GPIO_MASK(bit));
+}
+
+static int kempld_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct kempld_gpio_data *gpio = gpiochip_get_data(chip);
+	struct kempld_device_data *pld = gpio->pld;
+
+	return !!kempld_gpio_get_bit(pld, KEMPLD_GPIO_LVL_NUM(offset), offset);
+}
+
+static void kempld_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct kempld_gpio_data *gpio = gpiochip_get_data(chip);
+	struct kempld_device_data *pld = gpio->pld;
+
+	kempld_get_mutex(pld);
+	kempld_gpio_bitop(pld, KEMPLD_GPIO_LVL_NUM(offset), offset, value);
+	kempld_release_mutex(pld);
+}
+
+static int kempld_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct kempld_gpio_data *gpio = gpiochip_get_data(chip);
+	struct kempld_device_data *pld = gpio->pld;
+
+	kempld_get_mutex(pld);
+	kempld_gpio_bitop(pld, KEMPLD_GPIO_DIR_NUM(offset), offset, 0);
+	kempld_release_mutex(pld);
+
+	return 0;
+}
+
+static int kempld_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
+					int value)
+{
+	struct kempld_gpio_data *gpio = gpiochip_get_data(chip);
+	struct kempld_device_data *pld = gpio->pld;
+
+	kempld_get_mutex(pld);
+	kempld_gpio_bitop(pld, KEMPLD_GPIO_LVL_NUM(offset), offset, value);
+	kempld_gpio_bitop(pld, KEMPLD_GPIO_DIR_NUM(offset), offset, 1);
+	kempld_release_mutex(pld);
+
+	return 0;
+}
+
+static int kempld_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
+{
+	struct kempld_gpio_data *gpio = gpiochip_get_data(chip);
+	struct kempld_device_data *pld = gpio->pld;
+
+	if (kempld_gpio_get_bit(pld, KEMPLD_GPIO_DIR_NUM(offset), offset))
+		return GPIO_LINE_DIRECTION_OUT;
+
+	return GPIO_LINE_DIRECTION_IN;
+}
+
+static int kempld_gpio_pincount(struct kempld_device_data *pld)
+{
+	u16 evt, evt_back;
+
+	kempld_get_mutex(pld);
+
+	/* Backup event register as it might be already initialized */
+	evt_back = kempld_read16(pld, KEMPLD_GPIO_EVT_LVL_EDGE);
+	/* Clear event register */
+	kempld_write16(pld, KEMPLD_GPIO_EVT_LVL_EDGE, 0x0000);
+	/* Read back event register */
+	evt = kempld_read16(pld, KEMPLD_GPIO_EVT_LVL_EDGE);
+	/* Restore event register */
+	kempld_write16(pld, KEMPLD_GPIO_EVT_LVL_EDGE, evt_back);
+
+	kempld_release_mutex(pld);
+
+	return evt ? __ffs(evt) : 16;
+}
+
+static int kempld_gpio_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct kempld_device_data *pld = dev_get_drvdata(dev->parent);
+	struct kempld_platform_data *pdata = dev_get_platdata(pld->dev);
+	struct kempld_gpio_data *gpio;
+	struct gpio_chip *chip;
+	int ret;
+
+	if (pld->info.spec_major < 2) {
+		dev_err(dev,
+			"Driver only supports GPIO devices compatible to PLD spec. rev. 2.0 or higher\n");
+		return -ENODEV;
+	}
+
+	gpio = devm_kzalloc(dev, sizeof(*gpio), GFP_KERNEL);
+	if (!gpio)
+		return -ENOMEM;
+
+	gpio->pld = pld;
+
+	platform_set_drvdata(pdev, gpio);
+
+	chip = &gpio->chip;
+	chip->label = "gpio-kempld";
+	chip->owner = THIS_MODULE;
+	chip->parent = dev;
+	chip->can_sleep = true;
+	if (pdata && pdata->gpio_base)
+		chip->base = pdata->gpio_base;
+	else
+		chip->base = -1;
+	chip->direction_input = kempld_gpio_direction_input;
+	chip->direction_output = kempld_gpio_direction_output;
+	chip->get_direction = kempld_gpio_get_direction;
+	chip->get = kempld_gpio_get;
+	chip->set = kempld_gpio_set;
+	chip->ngpio = kempld_gpio_pincount(pld);
+	if (chip->ngpio == 0) {
+		dev_err(dev, "No GPIO pins detected\n");
+		return -ENODEV;
+	}
+
+	ret = devm_gpiochip_add_data(dev, chip, gpio);
+	if (ret) {
+		dev_err(dev, "Could not register GPIO chip\n");
+		return ret;
+	}
+
+	dev_info(dev, "GPIO functionality initialized with %d pins\n",
+		 chip->ngpio);
+
+	return 0;
+}
+
+static struct platform_driver kempld_gpio_driver = {
+	.driver = {
+		.name = "kempld-gpio",
+	},
+	.probe		= kempld_gpio_probe,
+};
+
+module_platform_driver(kempld_gpio_driver);
+
+MODULE_DESCRIPTION("KEM PLD GPIO Driver");
+MODULE_AUTHOR("Michael Brunner <michael.brunner@kontron.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:kempld-gpio");
diff --git a/drivers/gpio/gpio-logicvc.c b/drivers/gpio/gpio-logicvc.c
new file mode 100644
index 000000000..015632cf1
--- /dev/null
+++ b/drivers/gpio/gpio-logicvc.c
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Bootlin
+ * Author: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
+ */
+
+#include <linux/err.h>
+#include <linux/gpio/driver.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+
+#define LOGICVC_CTRL_REG		0x40
+#define LOGICVC_CTRL_GPIO_SHIFT		11
+#define LOGICVC_CTRL_GPIO_BITS		5
+
+#define LOGICVC_POWER_CTRL_REG		0x78
+#define LOGICVC_POWER_CTRL_GPIO_SHIFT	0
+#define LOGICVC_POWER_CTRL_GPIO_BITS	4
+
+struct logicvc_gpio {
+	struct gpio_chip chip;
+	struct regmap *regmap;
+};
+
+static void logicvc_gpio_offset(struct logicvc_gpio *logicvc, unsigned offset,
+				unsigned int *reg, unsigned int *bit)
+{
+	if (offset >= LOGICVC_CTRL_GPIO_BITS) {
+		*reg = LOGICVC_POWER_CTRL_REG;
+
+		/* To the (virtual) power ctrl offset. */
+		offset -= LOGICVC_CTRL_GPIO_BITS;
+		/* To the actual bit offset in reg. */
+		offset += LOGICVC_POWER_CTRL_GPIO_SHIFT;
+	} else {
+		*reg = LOGICVC_CTRL_REG;
+
+		/* To the actual bit offset in reg. */
+		offset += LOGICVC_CTRL_GPIO_SHIFT;
+	}
+
+	*bit = BIT(offset);
+}
+
+static int logicvc_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct logicvc_gpio *logicvc = gpiochip_get_data(chip);
+	unsigned int reg, bit, value;
+	int ret;
+
+	logicvc_gpio_offset(logicvc, offset, &reg, &bit);
+
+	ret = regmap_read(logicvc->regmap, reg, &value);
+	if (ret)
+		return ret;
+
+	return !!(value & bit);
+}
+
+static void logicvc_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct logicvc_gpio *logicvc = gpiochip_get_data(chip);
+	unsigned int reg, bit;
+
+	logicvc_gpio_offset(logicvc, offset, &reg, &bit);
+
+	regmap_update_bits(logicvc->regmap, reg, bit, value ? bit : 0);
+}
+
+static int logicvc_gpio_direction_output(struct gpio_chip *chip,
+					 unsigned offset, int value)
+{
+	/* Pins are always configured as output, so just set the value. */
+	logicvc_gpio_set(chip, offset, value);
+
+	return 0;
+}
+
+static struct regmap_config logicvc_gpio_regmap_config = {
+	.reg_bits	= 32,
+	.val_bits	= 32,
+	.reg_stride	= 4,
+	.name		= "logicvc-gpio",
+};
+
+static int logicvc_gpio_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *of_node = dev->of_node;
+	struct logicvc_gpio *logicvc;
+	int ret;
+
+	logicvc = devm_kzalloc(dev, sizeof(*logicvc), GFP_KERNEL);
+	if (!logicvc)
+		return -ENOMEM;
+
+	/* Try to get regmap from parent first. */
+	logicvc->regmap = syscon_node_to_regmap(of_node->parent);
+
+	/* Grab our own regmap if that fails. */
+	if (IS_ERR(logicvc->regmap)) {
+		struct resource res;
+		void __iomem *base;
+
+		ret = of_address_to_resource(of_node, 0, &res);
+		if (ret) {
+			dev_err(dev, "Failed to get resource from address\n");
+			return ret;
+		}
+
+		base = devm_ioremap_resource(dev, &res);
+		if (IS_ERR(base)) {
+			dev_err(dev, "Failed to map I/O base\n");
+			return PTR_ERR(base);
+		}
+
+		logicvc_gpio_regmap_config.max_register = resource_size(&res) -
+			logicvc_gpio_regmap_config.reg_stride;
+
+		logicvc->regmap =
+			devm_regmap_init_mmio(dev, base,
+					      &logicvc_gpio_regmap_config);
+		if (IS_ERR(logicvc->regmap)) {
+			dev_err(dev, "Failed to create regmap for I/O\n");
+			return PTR_ERR(logicvc->regmap);
+		}
+	}
+
+	logicvc->chip.parent = dev;
+	logicvc->chip.owner = THIS_MODULE;
+	logicvc->chip.label = dev_name(dev);
+	logicvc->chip.base = -1;
+	logicvc->chip.ngpio = LOGICVC_CTRL_GPIO_BITS +
+			      LOGICVC_POWER_CTRL_GPIO_BITS;
+	logicvc->chip.get = logicvc_gpio_get;
+	logicvc->chip.set = logicvc_gpio_set;
+	logicvc->chip.direction_output = logicvc_gpio_direction_output;
+
+	platform_set_drvdata(pdev, logicvc);
+
+	return devm_gpiochip_add_data(dev, &logicvc->chip, logicvc);
+}
+
+static const struct of_device_id logicivc_gpio_of_table[] = {
+	{
+		.compatible	= "xylon,logicvc-3.02.a-gpio",
+	},
+	{ }
+};
+
+MODULE_DEVICE_TABLE(of, logicivc_gpio_of_table);
+
+static struct platform_driver logicvc_gpio_driver = {
+	.driver	= {
+		.name		= "gpio-logicvc",
+		.of_match_table	= logicivc_gpio_of_table,
+	},
+	.probe	= logicvc_gpio_probe,
+};
+
+module_platform_driver(logicvc_gpio_driver);
+
+MODULE_AUTHOR("Paul Kocialkowski <paul.kocialkowski@bootlin.com>");
+MODULE_DESCRIPTION("Xylon LogiCVC GPIO driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/gpio-loongson.c b/drivers/gpio/gpio-loongson.c
new file mode 100644
index 000000000..a42145873
--- /dev/null
+++ b/drivers/gpio/gpio-loongson.c
@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Loongson-2F/3A/3B GPIO Support
+ *
+ *  Copyright (c) 2008 Richard Liu,  STMicroelectronics	 <richard.liu@st.com>
+ *  Copyright (c) 2008-2010 Arnaud Patard <apatard@mandriva.com>
+ *  Copyright (c) 2013 Hongbing Hu <huhb@lemote.com>
+ *  Copyright (c) 2014 Huacai Chen <chenhc@lemote.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/err.h>
+#include <linux/gpio/driver.h>
+#include <linux/platform_device.h>
+#include <linux/bitops.h>
+#include <asm/types.h>
+#include <loongson.h>
+
+#define STLS2F_N_GPIO		4
+#define STLS3A_N_GPIO		16
+
+#ifdef CONFIG_CPU_LOONGSON64
+#define LOONGSON_N_GPIO	STLS3A_N_GPIO
+#else
+#define LOONGSON_N_GPIO	STLS2F_N_GPIO
+#endif
+
+/*
+ * Offset into the register where we read lines, we write them from offset 0.
+ * This offset is the only thing that stand between us and using
+ * GPIO_GENERIC.
+ */
+#define LOONGSON_GPIO_IN_OFFSET	16
+
+static DEFINE_SPINLOCK(gpio_lock);
+
+static int loongson_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
+{
+	u32 val;
+
+	spin_lock(&gpio_lock);
+	val = LOONGSON_GPIODATA;
+	spin_unlock(&gpio_lock);
+
+	return !!(val & BIT(gpio + LOONGSON_GPIO_IN_OFFSET));
+}
+
+static void loongson_gpio_set_value(struct gpio_chip *chip,
+		unsigned gpio, int value)
+{
+	u32 val;
+
+	spin_lock(&gpio_lock);
+	val = LOONGSON_GPIODATA;
+	if (value)
+		val |= BIT(gpio);
+	else
+		val &= ~BIT(gpio);
+	LOONGSON_GPIODATA = val;
+	spin_unlock(&gpio_lock);
+}
+
+static int loongson_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
+{
+	u32 temp;
+
+	spin_lock(&gpio_lock);
+	temp = LOONGSON_GPIOIE;
+	temp |= BIT(gpio);
+	LOONGSON_GPIOIE = temp;
+	spin_unlock(&gpio_lock);
+
+	return 0;
+}
+
+static int loongson_gpio_direction_output(struct gpio_chip *chip,
+		unsigned gpio, int level)
+{
+	u32 temp;
+
+	loongson_gpio_set_value(chip, gpio, level);
+	spin_lock(&gpio_lock);
+	temp = LOONGSON_GPIOIE;
+	temp &= ~BIT(gpio);
+	LOONGSON_GPIOIE = temp;
+	spin_unlock(&gpio_lock);
+
+	return 0;
+}
+
+static int loongson_gpio_probe(struct platform_device *pdev)
+{
+	struct gpio_chip *gc;
+	struct device *dev = &pdev->dev;
+
+	gc = devm_kzalloc(dev, sizeof(*gc), GFP_KERNEL);
+	if (!gc)
+		return -ENOMEM;
+
+	gc->label = "loongson-gpio-chip";
+	gc->base = 0;
+	gc->ngpio = LOONGSON_N_GPIO;
+	gc->get = loongson_gpio_get_value;
+	gc->set = loongson_gpio_set_value;
+	gc->direction_input = loongson_gpio_direction_input;
+	gc->direction_output = loongson_gpio_direction_output;
+
+	return gpiochip_add_data(gc, NULL);
+}
+
+static struct platform_driver loongson_gpio_driver = {
+	.driver = {
+		.name = "loongson-gpio",
+	},
+	.probe = loongson_gpio_probe,
+};
+
+static int __init loongson_gpio_setup(void)
+{
+	struct platform_device *pdev;
+	int ret;
+
+	ret = platform_driver_register(&loongson_gpio_driver);
+	if (ret) {
+		pr_err("error registering loongson GPIO driver\n");
+		return ret;
+	}
+
+	pdev = platform_device_register_simple("loongson-gpio", -1, NULL, 0);
+	return PTR_ERR_OR_ZERO(pdev);
+}
+postcore_initcall(loongson_gpio_setup);
diff --git a/drivers/gpio/gpio-loongson1.c b/drivers/gpio/gpio-loongson1.c
new file mode 100644
index 000000000..1b1ee94ee
--- /dev/null
+++ b/drivers/gpio/gpio-loongson1.c
@@ -0,0 +1,95 @@
+/*
+ * GPIO Driver for Loongson 1 SoC
+ *
+ * Copyright (C) 2015-2016 Zhang, Keguang <keguang.zhang@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/gpio/driver.h>
+#include <linux/platform_device.h>
+#include <linux/bitops.h>
+
+/* Loongson 1 GPIO Register Definitions */
+#define GPIO_CFG		0x0
+#define GPIO_DIR		0x10
+#define GPIO_DATA		0x20
+#define GPIO_OUTPUT		0x30
+
+static void __iomem *gpio_reg_base;
+
+static int ls1x_gpio_request(struct gpio_chip *gc, unsigned int offset)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&gc->bgpio_lock, flags);
+	__raw_writel(__raw_readl(gpio_reg_base + GPIO_CFG) | BIT(offset),
+		     gpio_reg_base + GPIO_CFG);
+	spin_unlock_irqrestore(&gc->bgpio_lock, flags);
+
+	return 0;
+}
+
+static void ls1x_gpio_free(struct gpio_chip *gc, unsigned int offset)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&gc->bgpio_lock, flags);
+	__raw_writel(__raw_readl(gpio_reg_base + GPIO_CFG) & ~BIT(offset),
+		     gpio_reg_base + GPIO_CFG);
+	spin_unlock_irqrestore(&gc->bgpio_lock, flags);
+}
+
+static int ls1x_gpio_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct gpio_chip *gc;
+	int ret;
+
+	gc = devm_kzalloc(dev, sizeof(*gc), GFP_KERNEL);
+	if (!gc)
+		return -ENOMEM;
+
+	gpio_reg_base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(gpio_reg_base))
+		return PTR_ERR(gpio_reg_base);
+
+	ret = bgpio_init(gc, dev, 4, gpio_reg_base + GPIO_DATA,
+			 gpio_reg_base + GPIO_OUTPUT, NULL,
+			 NULL, gpio_reg_base + GPIO_DIR, 0);
+	if (ret)
+		goto err;
+
+	gc->owner = THIS_MODULE;
+	gc->request = ls1x_gpio_request;
+	gc->free = ls1x_gpio_free;
+	gc->base = pdev->id * 32;
+
+	ret = devm_gpiochip_add_data(dev, gc, NULL);
+	if (ret)
+		goto err;
+
+	platform_set_drvdata(pdev, gc);
+	dev_info(dev, "Loongson1 GPIO driver registered\n");
+
+	return 0;
+err:
+	dev_err(dev, "failed to register GPIO device\n");
+	return ret;
+}
+
+static struct platform_driver ls1x_gpio_driver = {
+	.probe	= ls1x_gpio_probe,
+	.driver	= {
+		.name	= "ls1x-gpio",
+	},
+};
+
+module_platform_driver(ls1x_gpio_driver);
+
+MODULE_AUTHOR("Kelvin Cheung <keguang.zhang@gmail.com>");
+MODULE_DESCRIPTION("Loongson1 GPIO driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/gpio-lp3943.c b/drivers/gpio/gpio-lp3943.c
new file mode 100644
index 000000000..8a30fb185
--- /dev/null
+++ b/drivers/gpio/gpio-lp3943.c
@@ -0,0 +1,226 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * TI/National Semiconductor LP3943 GPIO driver
+ *
+ * Copyright 2013 Texas Instruments
+ *
+ * Author: Milo Kim <milo.kim@ti.com>
+ */
+
+#include <linux/bitops.h>
+#include <linux/err.h>
+#include <linux/gpio/driver.h>
+#include <linux/i2c.h>
+#include <linux/mfd/lp3943.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+enum lp3943_gpios {
+	LP3943_GPIO1,
+	LP3943_GPIO2,
+	LP3943_GPIO3,
+	LP3943_GPIO4,
+	LP3943_GPIO5,
+	LP3943_GPIO6,
+	LP3943_GPIO7,
+	LP3943_GPIO8,
+	LP3943_GPIO9,
+	LP3943_GPIO10,
+	LP3943_GPIO11,
+	LP3943_GPIO12,
+	LP3943_GPIO13,
+	LP3943_GPIO14,
+	LP3943_GPIO15,
+	LP3943_GPIO16,
+	LP3943_MAX_GPIO,
+};
+
+struct lp3943_gpio {
+	struct gpio_chip chip;
+	struct lp3943 *lp3943;
+	u16 input_mask;		/* 1 = GPIO is input direction, 0 = output */
+};
+
+static int lp3943_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+	struct lp3943_gpio *lp3943_gpio = gpiochip_get_data(chip);
+	struct lp3943 *lp3943 = lp3943_gpio->lp3943;
+
+	/* Return an error if the pin is already assigned */
+	if (test_and_set_bit(offset, &lp3943->pin_used))
+		return -EBUSY;
+
+	return 0;
+}
+
+static void lp3943_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+	struct lp3943_gpio *lp3943_gpio = gpiochip_get_data(chip);
+	struct lp3943 *lp3943 = lp3943_gpio->lp3943;
+
+	clear_bit(offset, &lp3943->pin_used);
+}
+
+static int lp3943_gpio_set_mode(struct lp3943_gpio *lp3943_gpio, u8 offset,
+				u8 val)
+{
+	struct lp3943 *lp3943 = lp3943_gpio->lp3943;
+	const struct lp3943_reg_cfg *mux = lp3943->mux_cfg;
+
+	return lp3943_update_bits(lp3943, mux[offset].reg, mux[offset].mask,
+				  val << mux[offset].shift);
+}
+
+static int lp3943_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct lp3943_gpio *lp3943_gpio = gpiochip_get_data(chip);
+
+	lp3943_gpio->input_mask |= BIT(offset);
+
+	return lp3943_gpio_set_mode(lp3943_gpio, offset, LP3943_GPIO_IN);
+}
+
+static int lp3943_get_gpio_in_status(struct lp3943_gpio *lp3943_gpio,
+				     struct gpio_chip *chip, unsigned offset)
+{
+	u8 addr, read;
+	int err;
+
+	switch (offset) {
+	case LP3943_GPIO1 ... LP3943_GPIO8:
+		addr = LP3943_REG_GPIO_A;
+		break;
+	case LP3943_GPIO9 ... LP3943_GPIO16:
+		addr = LP3943_REG_GPIO_B;
+		offset = offset - 8;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	err = lp3943_read_byte(lp3943_gpio->lp3943, addr, &read);
+	if (err)
+		return err;
+
+	return !!(read & BIT(offset));
+}
+
+static int lp3943_get_gpio_out_status(struct lp3943_gpio *lp3943_gpio,
+				      struct gpio_chip *chip, unsigned offset)
+{
+	struct lp3943 *lp3943 = lp3943_gpio->lp3943;
+	const struct lp3943_reg_cfg *mux = lp3943->mux_cfg;
+	u8 read;
+	int err;
+
+	err = lp3943_read_byte(lp3943, mux[offset].reg, &read);
+	if (err)
+		return err;
+
+	read = (read & mux[offset].mask) >> mux[offset].shift;
+
+	if (read == LP3943_GPIO_OUT_HIGH)
+		return 1;
+	else if (read == LP3943_GPIO_OUT_LOW)
+		return 0;
+	else
+		return -EINVAL;
+}
+
+static int lp3943_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct lp3943_gpio *lp3943_gpio = gpiochip_get_data(chip);
+
+	/*
+	 * Limitation:
+	 *   LP3943 doesn't have the GPIO direction register. It provides
+	 *   only input and output status registers.
+	 *   So, direction info is required to handle the 'get' operation.
+	 *   This variable is updated whenever the direction is changed and
+	 *   it is used here.
+	 */
+
+	if (lp3943_gpio->input_mask & BIT(offset))
+		return lp3943_get_gpio_in_status(lp3943_gpio, chip, offset);
+	else
+		return lp3943_get_gpio_out_status(lp3943_gpio, chip, offset);
+}
+
+static void lp3943_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct lp3943_gpio *lp3943_gpio = gpiochip_get_data(chip);
+	u8 data;
+
+	if (value)
+		data = LP3943_GPIO_OUT_HIGH;
+	else
+		data = LP3943_GPIO_OUT_LOW;
+
+	lp3943_gpio_set_mode(lp3943_gpio, offset, data);
+}
+
+static int lp3943_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
+					int value)
+{
+	struct lp3943_gpio *lp3943_gpio = gpiochip_get_data(chip);
+
+	lp3943_gpio_set(chip, offset, value);
+	lp3943_gpio->input_mask &= ~BIT(offset);
+
+	return 0;
+}
+
+static const struct gpio_chip lp3943_gpio_chip = {
+	.label			= "lp3943",
+	.owner			= THIS_MODULE,
+	.request		= lp3943_gpio_request,
+	.free			= lp3943_gpio_free,
+	.direction_input	= lp3943_gpio_direction_input,
+	.get			= lp3943_gpio_get,
+	.direction_output	= lp3943_gpio_direction_output,
+	.set			= lp3943_gpio_set,
+	.base			= -1,
+	.ngpio			= LP3943_MAX_GPIO,
+	.can_sleep		= 1,
+};
+
+static int lp3943_gpio_probe(struct platform_device *pdev)
+{
+	struct lp3943 *lp3943 = dev_get_drvdata(pdev->dev.parent);
+	struct lp3943_gpio *lp3943_gpio;
+
+	lp3943_gpio = devm_kzalloc(&pdev->dev, sizeof(*lp3943_gpio),
+				GFP_KERNEL);
+	if (!lp3943_gpio)
+		return -ENOMEM;
+
+	lp3943_gpio->lp3943 = lp3943;
+	lp3943_gpio->chip = lp3943_gpio_chip;
+	lp3943_gpio->chip.parent = &pdev->dev;
+
+	platform_set_drvdata(pdev, lp3943_gpio);
+
+	return devm_gpiochip_add_data(&pdev->dev, &lp3943_gpio->chip,
+				      lp3943_gpio);
+}
+
+static const struct of_device_id lp3943_gpio_of_match[] = {
+	{ .compatible = "ti,lp3943-gpio", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, lp3943_gpio_of_match);
+
+static struct platform_driver lp3943_gpio_driver = {
+	.probe = lp3943_gpio_probe,
+	.driver = {
+		.name = "lp3943-gpio",
+		.of_match_table = lp3943_gpio_of_match,
+	},
+};
+module_platform_driver(lp3943_gpio_driver);
+
+MODULE_DESCRIPTION("LP3943 GPIO driver");
+MODULE_ALIAS("platform:lp3943-gpio");
+MODULE_AUTHOR("Milo Kim");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/gpio-lp873x.c b/drivers/gpio/gpio-lp873x.c
new file mode 100644
index 000000000..70fad87ff
--- /dev/null
+++ b/drivers/gpio/gpio-lp873x.c
@@ -0,0 +1,183 @@
+/*
+ * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
+ *	Keerthy <j-keerthy@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether expressed or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License version 2 for more details.
+ *
+ * Based on the TPS65218 driver
+ */
+
+#include <linux/gpio/driver.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include <linux/mfd/lp873x.h>
+
+#define BITS_PER_GPO		0x4
+#define LP873X_GPO_CTRL_OD	0x2
+
+struct lp873x_gpio {
+	struct gpio_chip chip;
+	struct lp873x *lp873;
+};
+
+static int lp873x_gpio_get_direction(struct gpio_chip *chip,
+				     unsigned int offset)
+{
+	/* This device is output only */
+	return GPIO_LINE_DIRECTION_OUT;
+}
+
+static int lp873x_gpio_direction_input(struct gpio_chip *chip,
+				       unsigned int offset)
+{
+	/* This device is output only */
+	return -EINVAL;
+}
+
+static int lp873x_gpio_direction_output(struct gpio_chip *chip,
+					unsigned int offset, int value)
+{
+	struct lp873x_gpio *gpio = gpiochip_get_data(chip);
+
+	/* Set the initial value */
+	return regmap_update_bits(gpio->lp873->regmap, LP873X_REG_GPO_CTRL,
+				  BIT(offset * BITS_PER_GPO),
+				  value ? BIT(offset * BITS_PER_GPO) : 0);
+}
+
+static int lp873x_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+	struct lp873x_gpio *gpio = gpiochip_get_data(chip);
+	int ret, val;
+
+	ret = regmap_read(gpio->lp873->regmap, LP873X_REG_GPO_CTRL, &val);
+	if (ret < 0)
+		return ret;
+
+	return val & BIT(offset * BITS_PER_GPO);
+}
+
+static void lp873x_gpio_set(struct gpio_chip *chip, unsigned int offset,
+			    int value)
+{
+	struct lp873x_gpio *gpio = gpiochip_get_data(chip);
+
+	regmap_update_bits(gpio->lp873->regmap, LP873X_REG_GPO_CTRL,
+			   BIT(offset * BITS_PER_GPO),
+			   value ? BIT(offset * BITS_PER_GPO) : 0);
+}
+
+static int lp873x_gpio_request(struct gpio_chip *gc, unsigned int offset)
+{
+	struct lp873x_gpio *gpio = gpiochip_get_data(gc);
+	int ret;
+
+	switch (offset) {
+	case 0:
+		/* No MUX Set up Needed for GPO */
+		break;
+	case 1:
+		/* Setup the CLKIN_PIN_SEL MUX to GPO2 */
+		ret = regmap_update_bits(gpio->lp873->regmap, LP873X_REG_CONFIG,
+					 LP873X_CONFIG_CLKIN_PIN_SEL, 0);
+		if (ret)
+			return ret;
+
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int lp873x_gpio_set_config(struct gpio_chip *gc, unsigned offset,
+				  unsigned long config)
+{
+	struct lp873x_gpio *gpio = gpiochip_get_data(gc);
+
+	switch (pinconf_to_config_param(config)) {
+	case PIN_CONFIG_DRIVE_OPEN_DRAIN:
+		return regmap_update_bits(gpio->lp873->regmap,
+					  LP873X_REG_GPO_CTRL,
+					  BIT(offset * BITS_PER_GPO +
+					  LP873X_GPO_CTRL_OD),
+					  BIT(offset * BITS_PER_GPO +
+					  LP873X_GPO_CTRL_OD));
+
+	case PIN_CONFIG_DRIVE_PUSH_PULL:
+		return regmap_update_bits(gpio->lp873->regmap,
+					  LP873X_REG_GPO_CTRL,
+					  BIT(offset * BITS_PER_GPO +
+					  LP873X_GPO_CTRL_OD), 0);
+	default:
+		return -ENOTSUPP;
+	}
+}
+
+static const struct gpio_chip template_chip = {
+	.label			= "lp873x-gpio",
+	.owner			= THIS_MODULE,
+	.request		= lp873x_gpio_request,
+	.get_direction		= lp873x_gpio_get_direction,
+	.direction_input	= lp873x_gpio_direction_input,
+	.direction_output	= lp873x_gpio_direction_output,
+	.get			= lp873x_gpio_get,
+	.set			= lp873x_gpio_set,
+	.set_config		= lp873x_gpio_set_config,
+	.base			= -1,
+	.ngpio			= 2,
+	.can_sleep		= true,
+};
+
+static int lp873x_gpio_probe(struct platform_device *pdev)
+{
+	struct lp873x_gpio *gpio;
+	int ret;
+
+	gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
+	if (!gpio)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, gpio);
+
+	gpio->lp873 = dev_get_drvdata(pdev->dev.parent);
+	gpio->chip = template_chip;
+	gpio->chip.parent = gpio->lp873->dev;
+
+	ret = devm_gpiochip_add_data(&pdev->dev, &gpio->chip, gpio);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct platform_device_id lp873x_gpio_id_table[] = {
+	{ "lp873x-gpio", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(platform, lp873x_gpio_id_table);
+
+static struct platform_driver lp873x_gpio_driver = {
+	.driver = {
+		.name = "lp873x-gpio",
+	},
+	.probe = lp873x_gpio_probe,
+	.id_table = lp873x_gpio_id_table,
+};
+module_platform_driver(lp873x_gpio_driver);
+
+MODULE_AUTHOR("Keerthy <j-keerthy@ti.com>");
+MODULE_DESCRIPTION("LP873X GPIO driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-lp87565.c b/drivers/gpio/gpio-lp87565.c
new file mode 100644
index 000000000..e1244520c
--- /dev/null
+++ b/drivers/gpio/gpio-lp87565.c
@@ -0,0 +1,195 @@
+/*
+ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ *	Keerthy <j-keerthy@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether expressed or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License version 2 for more details.
+ *
+ * Based on the LP873X driver
+ */
+
+#include <linux/gpio/driver.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include <linux/mfd/lp87565.h>
+
+struct lp87565_gpio {
+	struct gpio_chip chip;
+	struct regmap *map;
+};
+
+static int lp87565_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+	struct lp87565_gpio *gpio = gpiochip_get_data(chip);
+	int ret, val;
+
+	ret = regmap_read(gpio->map, LP87565_REG_GPIO_IN, &val);
+	if (ret < 0)
+		return ret;
+
+	return !!(val & BIT(offset));
+}
+
+static void lp87565_gpio_set(struct gpio_chip *chip, unsigned int offset,
+			     int value)
+{
+	struct lp87565_gpio *gpio = gpiochip_get_data(chip);
+
+	regmap_update_bits(gpio->map, LP87565_REG_GPIO_OUT,
+			   BIT(offset), value ? BIT(offset) : 0);
+}
+
+static int lp87565_gpio_get_direction(struct gpio_chip *chip,
+				      unsigned int offset)
+{
+	struct lp87565_gpio *gpio = gpiochip_get_data(chip);
+	int ret, val;
+
+	ret = regmap_read(gpio->map, LP87565_REG_GPIO_CONFIG, &val);
+	if (ret < 0)
+		return ret;
+
+	if (val & BIT(offset))
+		return GPIO_LINE_DIRECTION_OUT;
+
+	return GPIO_LINE_DIRECTION_IN;
+}
+
+static int lp87565_gpio_direction_input(struct gpio_chip *chip,
+					unsigned int offset)
+{
+	struct lp87565_gpio *gpio = gpiochip_get_data(chip);
+
+	return regmap_update_bits(gpio->map,
+				  LP87565_REG_GPIO_CONFIG,
+				  BIT(offset), 0);
+}
+
+static int lp87565_gpio_direction_output(struct gpio_chip *chip,
+					 unsigned int offset, int value)
+{
+	struct lp87565_gpio *gpio = gpiochip_get_data(chip);
+
+	lp87565_gpio_set(chip, offset, value);
+
+	return regmap_update_bits(gpio->map,
+				  LP87565_REG_GPIO_CONFIG,
+				  BIT(offset), BIT(offset));
+}
+
+static int lp87565_gpio_request(struct gpio_chip *gc, unsigned int offset)
+{
+	struct lp87565_gpio *gpio = gpiochip_get_data(gc);
+	int ret;
+
+	switch (offset) {
+	case 0:
+	case 1:
+	case 2:
+		/*
+		 * MUX can program the pin to be in EN1/2/3 pin mode
+		 * Or GPIO1/2/3 mode.
+		 * Setup the GPIO*_SEL MUX to GPIO mode
+		 */
+		ret = regmap_update_bits(gpio->map,
+					 LP87565_REG_PIN_FUNCTION,
+					 BIT(offset), BIT(offset));
+		if (ret)
+			return ret;
+
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int lp87565_gpio_set_config(struct gpio_chip *gc, unsigned int offset,
+				   unsigned long config)
+{
+	struct lp87565_gpio *gpio = gpiochip_get_data(gc);
+
+	switch (pinconf_to_config_param(config)) {
+	case PIN_CONFIG_DRIVE_OPEN_DRAIN:
+		return regmap_update_bits(gpio->map,
+					  LP87565_REG_GPIO_CONFIG,
+					  BIT(offset +
+					      __ffs(LP87565_GOIO1_OD)),
+					  BIT(offset +
+					      __ffs(LP87565_GOIO1_OD)));
+	case PIN_CONFIG_DRIVE_PUSH_PULL:
+		return regmap_update_bits(gpio->map,
+					  LP87565_REG_GPIO_CONFIG,
+					  BIT(offset +
+					      __ffs(LP87565_GOIO1_OD)), 0);
+	default:
+		return -ENOTSUPP;
+	}
+}
+
+static const struct gpio_chip template_chip = {
+	.label			= "lp87565-gpio",
+	.owner			= THIS_MODULE,
+	.request		= lp87565_gpio_request,
+	.get_direction		= lp87565_gpio_get_direction,
+	.direction_input	= lp87565_gpio_direction_input,
+	.direction_output	= lp87565_gpio_direction_output,
+	.get			= lp87565_gpio_get,
+	.set			= lp87565_gpio_set,
+	.set_config		= lp87565_gpio_set_config,
+	.base			= -1,
+	.ngpio			= 3,
+	.can_sleep		= true,
+};
+
+static int lp87565_gpio_probe(struct platform_device *pdev)
+{
+	struct lp87565_gpio *gpio;
+	struct lp87565 *lp87565;
+	int ret;
+
+	gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
+	if (!gpio)
+		return -ENOMEM;
+
+	lp87565 = dev_get_drvdata(pdev->dev.parent);
+	gpio->chip = template_chip;
+	gpio->chip.parent = lp87565->dev;
+	gpio->map = lp87565->regmap;
+
+	ret = devm_gpiochip_add_data(&pdev->dev, &gpio->chip, gpio);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct platform_device_id lp87565_gpio_id_table[] = {
+	{ "lp87565-q1-gpio", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(platform, lp87565_gpio_id_table);
+
+static struct platform_driver lp87565_gpio_driver = {
+	.driver = {
+		.name = "lp87565-gpio",
+	},
+	.probe = lp87565_gpio_probe,
+	.id_table = lp87565_gpio_id_table,
+};
+module_platform_driver(lp87565_gpio_driver);
+
+MODULE_AUTHOR("Keerthy <j-keerthy@ti.com>");
+MODULE_DESCRIPTION("LP87565 GPIO driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-lpc18xx.c b/drivers/gpio/gpio-lpc18xx.c
new file mode 100644
index 000000000..d711ae067
--- /dev/null
+++ b/drivers/gpio/gpio-lpc18xx.c
@@ -0,0 +1,416 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * GPIO driver for NXP LPC18xx/43xx.
+ *
+ * Copyright (C) 2018 Vladimir Zapolskiy <vz@mleia.com>
+ * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com>
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/gpio/driver.h>
+#include <linux/io.h>
+#include <linux/irqdomain.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_gpio.h>
+#include <linux/of_irq.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/platform_device.h>
+
+/* LPC18xx GPIO register offsets */
+#define LPC18XX_REG_DIR(n)	(0x2000 + n * sizeof(u32))
+
+#define LPC18XX_MAX_PORTS	8
+#define LPC18XX_PINS_PER_PORT	32
+
+/* LPC18xx GPIO pin interrupt controller register offsets */
+#define LPC18XX_GPIO_PIN_IC_ISEL	0x00
+#define LPC18XX_GPIO_PIN_IC_IENR	0x04
+#define LPC18XX_GPIO_PIN_IC_SIENR	0x08
+#define LPC18XX_GPIO_PIN_IC_CIENR	0x0c
+#define LPC18XX_GPIO_PIN_IC_IENF	0x10
+#define LPC18XX_GPIO_PIN_IC_SIENF	0x14
+#define LPC18XX_GPIO_PIN_IC_CIENF	0x18
+#define LPC18XX_GPIO_PIN_IC_RISE	0x1c
+#define LPC18XX_GPIO_PIN_IC_FALL	0x20
+#define LPC18XX_GPIO_PIN_IC_IST		0x24
+
+#define NR_LPC18XX_GPIO_PIN_IC_IRQS	8
+
+struct lpc18xx_gpio_pin_ic {
+	void __iomem *base;
+	struct irq_domain *domain;
+	struct raw_spinlock lock;
+};
+
+struct lpc18xx_gpio_chip {
+	struct gpio_chip gpio;
+	void __iomem *base;
+	struct clk *clk;
+	struct lpc18xx_gpio_pin_ic *pin_ic;
+	spinlock_t lock;
+};
+
+static inline void lpc18xx_gpio_pin_ic_isel(struct lpc18xx_gpio_pin_ic *ic,
+					    u32 pin, bool set)
+{
+	u32 val = readl_relaxed(ic->base + LPC18XX_GPIO_PIN_IC_ISEL);
+
+	if (set)
+		val &= ~BIT(pin);
+	else
+		val |= BIT(pin);
+
+	writel_relaxed(val, ic->base + LPC18XX_GPIO_PIN_IC_ISEL);
+}
+
+static inline void lpc18xx_gpio_pin_ic_set(struct lpc18xx_gpio_pin_ic *ic,
+					   u32 pin, u32 reg)
+{
+	writel_relaxed(BIT(pin), ic->base + reg);
+}
+
+static void lpc18xx_gpio_pin_ic_mask(struct irq_data *d)
+{
+	struct lpc18xx_gpio_pin_ic *ic = d->chip_data;
+	u32 type = irqd_get_trigger_type(d);
+
+	raw_spin_lock(&ic->lock);
+
+	if (type & IRQ_TYPE_LEVEL_MASK || type & IRQ_TYPE_EDGE_RISING)
+		lpc18xx_gpio_pin_ic_set(ic, d->hwirq,
+					LPC18XX_GPIO_PIN_IC_CIENR);
+
+	if (type & IRQ_TYPE_EDGE_FALLING)
+		lpc18xx_gpio_pin_ic_set(ic, d->hwirq,
+					LPC18XX_GPIO_PIN_IC_CIENF);
+
+	raw_spin_unlock(&ic->lock);
+
+	irq_chip_mask_parent(d);
+}
+
+static void lpc18xx_gpio_pin_ic_unmask(struct irq_data *d)
+{
+	struct lpc18xx_gpio_pin_ic *ic = d->chip_data;
+	u32 type = irqd_get_trigger_type(d);
+
+	raw_spin_lock(&ic->lock);
+
+	if (type & IRQ_TYPE_LEVEL_MASK || type & IRQ_TYPE_EDGE_RISING)
+		lpc18xx_gpio_pin_ic_set(ic, d->hwirq,
+					LPC18XX_GPIO_PIN_IC_SIENR);
+
+	if (type & IRQ_TYPE_EDGE_FALLING)
+		lpc18xx_gpio_pin_ic_set(ic, d->hwirq,
+					LPC18XX_GPIO_PIN_IC_SIENF);
+
+	raw_spin_unlock(&ic->lock);
+
+	irq_chip_unmask_parent(d);
+}
+
+static void lpc18xx_gpio_pin_ic_eoi(struct irq_data *d)
+{
+	struct lpc18xx_gpio_pin_ic *ic = d->chip_data;
+	u32 type = irqd_get_trigger_type(d);
+
+	raw_spin_lock(&ic->lock);
+
+	if (type & IRQ_TYPE_EDGE_BOTH)
+		lpc18xx_gpio_pin_ic_set(ic, d->hwirq,
+					LPC18XX_GPIO_PIN_IC_IST);
+
+	raw_spin_unlock(&ic->lock);
+
+	irq_chip_eoi_parent(d);
+}
+
+static int lpc18xx_gpio_pin_ic_set_type(struct irq_data *d, unsigned int type)
+{
+	struct lpc18xx_gpio_pin_ic *ic = d->chip_data;
+
+	raw_spin_lock(&ic->lock);
+
+	if (type & IRQ_TYPE_LEVEL_HIGH) {
+		lpc18xx_gpio_pin_ic_isel(ic, d->hwirq, true);
+		lpc18xx_gpio_pin_ic_set(ic, d->hwirq,
+					LPC18XX_GPIO_PIN_IC_SIENF);
+	} else if (type & IRQ_TYPE_LEVEL_LOW) {
+		lpc18xx_gpio_pin_ic_isel(ic, d->hwirq, true);
+		lpc18xx_gpio_pin_ic_set(ic, d->hwirq,
+					LPC18XX_GPIO_PIN_IC_CIENF);
+	} else {
+		lpc18xx_gpio_pin_ic_isel(ic, d->hwirq, false);
+	}
+
+	raw_spin_unlock(&ic->lock);
+
+	return 0;
+}
+
+static struct irq_chip lpc18xx_gpio_pin_ic = {
+	.name		= "LPC18xx GPIO pin",
+	.irq_mask	= lpc18xx_gpio_pin_ic_mask,
+	.irq_unmask	= lpc18xx_gpio_pin_ic_unmask,
+	.irq_eoi	= lpc18xx_gpio_pin_ic_eoi,
+	.irq_set_type	= lpc18xx_gpio_pin_ic_set_type,
+	.flags		= IRQCHIP_SET_TYPE_MASKED,
+};
+
+static int lpc18xx_gpio_pin_ic_domain_alloc(struct irq_domain *domain,
+					    unsigned int virq,
+					    unsigned int nr_irqs, void *data)
+{
+	struct irq_fwspec parent_fwspec, *fwspec = data;
+	struct lpc18xx_gpio_pin_ic *ic = domain->host_data;
+	irq_hw_number_t hwirq;
+	int ret;
+
+	if (nr_irqs != 1)
+		return -EINVAL;
+
+	hwirq = fwspec->param[0];
+	if (hwirq >= NR_LPC18XX_GPIO_PIN_IC_IRQS)
+		return -EINVAL;
+
+	/*
+	 * All LPC18xx/LPC43xx GPIO pin hardware interrupts are translated
+	 * into edge interrupts 32...39 on parent Cortex-M3/M4 NVIC
+	 */
+	parent_fwspec.fwnode = domain->parent->fwnode;
+	parent_fwspec.param_count = 1;
+	parent_fwspec.param[0] = hwirq + 32;
+
+	ret = irq_domain_alloc_irqs_parent(domain, virq, 1, &parent_fwspec);
+	if (ret < 0) {
+		pr_err("failed to allocate parent irq %u: %d\n",
+		       parent_fwspec.param[0], ret);
+		return ret;
+	}
+
+	return irq_domain_set_hwirq_and_chip(domain, virq, hwirq,
+					     &lpc18xx_gpio_pin_ic, ic);
+}
+
+static const struct irq_domain_ops lpc18xx_gpio_pin_ic_domain_ops = {
+	.alloc	= lpc18xx_gpio_pin_ic_domain_alloc,
+	.xlate	= irq_domain_xlate_twocell,
+	.free	= irq_domain_free_irqs_common,
+};
+
+static int lpc18xx_gpio_pin_ic_probe(struct lpc18xx_gpio_chip *gc)
+{
+	struct device *dev = gc->gpio.parent;
+	struct irq_domain *parent_domain;
+	struct device_node *parent_node;
+	struct lpc18xx_gpio_pin_ic *ic;
+	struct resource res;
+	int ret, index;
+
+	parent_node = of_irq_find_parent(dev->of_node);
+	if (!parent_node)
+		return -ENXIO;
+
+	parent_domain = irq_find_host(parent_node);
+	of_node_put(parent_node);
+	if (!parent_domain)
+		return -ENXIO;
+
+	ic = devm_kzalloc(dev, sizeof(*ic), GFP_KERNEL);
+	if (!ic)
+		return -ENOMEM;
+
+	index = of_property_match_string(dev->of_node, "reg-names",
+					 "gpio-pin-ic");
+	if (index < 0) {
+		ret = -ENODEV;
+		goto free_ic;
+	}
+
+	ret = of_address_to_resource(dev->of_node, index, &res);
+	if (ret < 0)
+		goto free_ic;
+
+	ic->base = devm_ioremap_resource(dev, &res);
+	if (IS_ERR(ic->base)) {
+		ret = PTR_ERR(ic->base);
+		goto free_ic;
+	}
+
+	raw_spin_lock_init(&ic->lock);
+
+	ic->domain = irq_domain_add_hierarchy(parent_domain, 0,
+					      NR_LPC18XX_GPIO_PIN_IC_IRQS,
+					      dev->of_node,
+					      &lpc18xx_gpio_pin_ic_domain_ops,
+					      ic);
+	if (!ic->domain) {
+		pr_err("unable to add irq domain\n");
+		ret = -ENODEV;
+		goto free_iomap;
+	}
+
+	gc->pin_ic = ic;
+
+	return 0;
+
+free_iomap:
+	devm_iounmap(dev, ic->base);
+free_ic:
+	devm_kfree(dev, ic);
+
+	return ret;
+}
+
+static void lpc18xx_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct lpc18xx_gpio_chip *gc = gpiochip_get_data(chip);
+	writeb(value ? 1 : 0, gc->base + offset);
+}
+
+static int lpc18xx_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct lpc18xx_gpio_chip *gc = gpiochip_get_data(chip);
+	return !!readb(gc->base + offset);
+}
+
+static int lpc18xx_gpio_direction(struct gpio_chip *chip, unsigned offset,
+				  bool out)
+{
+	struct lpc18xx_gpio_chip *gc = gpiochip_get_data(chip);
+	unsigned long flags;
+	u32 port, pin, dir;
+
+	port = offset / LPC18XX_PINS_PER_PORT;
+	pin  = offset % LPC18XX_PINS_PER_PORT;
+
+	spin_lock_irqsave(&gc->lock, flags);
+	dir = readl(gc->base + LPC18XX_REG_DIR(port));
+	if (out)
+		dir |= BIT(pin);
+	else
+		dir &= ~BIT(pin);
+	writel(dir, gc->base + LPC18XX_REG_DIR(port));
+	spin_unlock_irqrestore(&gc->lock, flags);
+
+	return 0;
+}
+
+static int lpc18xx_gpio_direction_input(struct gpio_chip *chip,
+					unsigned offset)
+{
+	return lpc18xx_gpio_direction(chip, offset, false);
+}
+
+static int lpc18xx_gpio_direction_output(struct gpio_chip *chip,
+					 unsigned offset, int value)
+{
+	lpc18xx_gpio_set(chip, offset, value);
+	return lpc18xx_gpio_direction(chip, offset, true);
+}
+
+static const struct gpio_chip lpc18xx_chip = {
+	.label			= "lpc18xx/43xx-gpio",
+	.request		= gpiochip_generic_request,
+	.free			= gpiochip_generic_free,
+	.direction_input	= lpc18xx_gpio_direction_input,
+	.direction_output	= lpc18xx_gpio_direction_output,
+	.set			= lpc18xx_gpio_set,
+	.get			= lpc18xx_gpio_get,
+	.ngpio			= LPC18XX_MAX_PORTS * LPC18XX_PINS_PER_PORT,
+	.owner			= THIS_MODULE,
+};
+
+static int lpc18xx_gpio_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct lpc18xx_gpio_chip *gc;
+	int index, ret;
+
+	gc = devm_kzalloc(dev, sizeof(*gc), GFP_KERNEL);
+	if (!gc)
+		return -ENOMEM;
+
+	gc->gpio = lpc18xx_chip;
+	platform_set_drvdata(pdev, gc);
+
+	index = of_property_match_string(dev->of_node, "reg-names", "gpio");
+	if (index < 0) {
+		/* To support backward compatibility take the first resource */
+		gc->base = devm_platform_ioremap_resource(pdev, 0);
+	} else {
+		struct resource res;
+
+		ret = of_address_to_resource(dev->of_node, index, &res);
+		if (ret < 0)
+			return ret;
+
+		gc->base = devm_ioremap_resource(dev, &res);
+	}
+	if (IS_ERR(gc->base))
+		return PTR_ERR(gc->base);
+
+	gc->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(gc->clk)) {
+		dev_err(dev, "input clock not found\n");
+		return PTR_ERR(gc->clk);
+	}
+
+	ret = clk_prepare_enable(gc->clk);
+	if (ret) {
+		dev_err(dev, "unable to enable clock\n");
+		return ret;
+	}
+
+	spin_lock_init(&gc->lock);
+
+	gc->gpio.parent = dev;
+
+	ret = devm_gpiochip_add_data(dev, &gc->gpio, gc);
+	if (ret) {
+		dev_err(dev, "failed to add gpio chip\n");
+		clk_disable_unprepare(gc->clk);
+		return ret;
+	}
+
+	/* On error GPIO pin interrupt controller just won't be registered */
+	lpc18xx_gpio_pin_ic_probe(gc);
+
+	return 0;
+}
+
+static int lpc18xx_gpio_remove(struct platform_device *pdev)
+{
+	struct lpc18xx_gpio_chip *gc = platform_get_drvdata(pdev);
+
+	if (gc->pin_ic)
+		irq_domain_remove(gc->pin_ic->domain);
+
+	clk_disable_unprepare(gc->clk);
+
+	return 0;
+}
+
+static const struct of_device_id lpc18xx_gpio_match[] = {
+	{ .compatible = "nxp,lpc1850-gpio" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, lpc18xx_gpio_match);
+
+static struct platform_driver lpc18xx_gpio_driver = {
+	.probe	= lpc18xx_gpio_probe,
+	.remove	= lpc18xx_gpio_remove,
+	.driver	= {
+		.name		= "lpc18xx-gpio",
+		.of_match_table	= lpc18xx_gpio_match,
+	},
+};
+module_platform_driver(lpc18xx_gpio_driver);
+
+MODULE_AUTHOR("Joachim Eastwood <manabian@gmail.com>");
+MODULE_AUTHOR("Vladimir Zapolskiy <vz@mleia.com>");
+MODULE_DESCRIPTION("GPIO driver for LPC18xx/43xx");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-lpc32xx.c b/drivers/gpio/gpio-lpc32xx.c
new file mode 100644
index 000000000..4e626c423
--- /dev/null
+++ b/drivers/gpio/gpio-lpc32xx.c
@@ -0,0 +1,547 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * GPIO driver for LPC32xx SoC
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/errno.h>
+#include <linux/gpio/driver.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+
+#define LPC32XX_GPIO_P3_INP_STATE		(0x000)
+#define LPC32XX_GPIO_P3_OUTP_SET		(0x004)
+#define LPC32XX_GPIO_P3_OUTP_CLR		(0x008)
+#define LPC32XX_GPIO_P3_OUTP_STATE		(0x00C)
+#define LPC32XX_GPIO_P2_DIR_SET			(0x010)
+#define LPC32XX_GPIO_P2_DIR_CLR			(0x014)
+#define LPC32XX_GPIO_P2_DIR_STATE		(0x018)
+#define LPC32XX_GPIO_P2_INP_STATE		(0x01C)
+#define LPC32XX_GPIO_P2_OUTP_SET		(0x020)
+#define LPC32XX_GPIO_P2_OUTP_CLR		(0x024)
+#define LPC32XX_GPIO_P2_MUX_SET			(0x028)
+#define LPC32XX_GPIO_P2_MUX_CLR			(0x02C)
+#define LPC32XX_GPIO_P2_MUX_STATE		(0x030)
+#define LPC32XX_GPIO_P0_INP_STATE		(0x040)
+#define LPC32XX_GPIO_P0_OUTP_SET		(0x044)
+#define LPC32XX_GPIO_P0_OUTP_CLR		(0x048)
+#define LPC32XX_GPIO_P0_OUTP_STATE		(0x04C)
+#define LPC32XX_GPIO_P0_DIR_SET			(0x050)
+#define LPC32XX_GPIO_P0_DIR_CLR			(0x054)
+#define LPC32XX_GPIO_P0_DIR_STATE		(0x058)
+#define LPC32XX_GPIO_P1_INP_STATE		(0x060)
+#define LPC32XX_GPIO_P1_OUTP_SET		(0x064)
+#define LPC32XX_GPIO_P1_OUTP_CLR		(0x068)
+#define LPC32XX_GPIO_P1_OUTP_STATE		(0x06C)
+#define LPC32XX_GPIO_P1_DIR_SET			(0x070)
+#define LPC32XX_GPIO_P1_DIR_CLR			(0x074)
+#define LPC32XX_GPIO_P1_DIR_STATE		(0x078)
+
+#define GPIO012_PIN_TO_BIT(x)			(1 << (x))
+#define GPIO3_PIN_TO_BIT(x)			(1 << ((x) + 25))
+#define GPO3_PIN_TO_BIT(x)			(1 << (x))
+#define GPIO012_PIN_IN_SEL(x, y)		(((x) >> (y)) & 1)
+#define GPIO3_PIN_IN_SHIFT(x)			((x) == 5 ? 24 : 10 + (x))
+#define GPIO3_PIN_IN_SEL(x, y)			(((x) >> GPIO3_PIN_IN_SHIFT(y)) & 1)
+#define GPIO3_PIN5_IN_SEL(x)			(((x) >> 24) & 1)
+#define GPI3_PIN_IN_SEL(x, y)			(((x) >> (y)) & 1)
+#define GPO3_PIN_IN_SEL(x, y)			(((x) >> (y)) & 1)
+
+#define LPC32XX_GPIO_P0_MAX	8
+#define LPC32XX_GPIO_P1_MAX	24
+#define LPC32XX_GPIO_P2_MAX	13
+#define LPC32XX_GPIO_P3_MAX	6
+#define LPC32XX_GPI_P3_MAX	29
+#define LPC32XX_GPO_P3_MAX	24
+
+#define LPC32XX_GPIO_P0_GRP	0
+#define LPC32XX_GPIO_P1_GRP	(LPC32XX_GPIO_P0_GRP + LPC32XX_GPIO_P0_MAX)
+#define LPC32XX_GPIO_P2_GRP	(LPC32XX_GPIO_P1_GRP + LPC32XX_GPIO_P1_MAX)
+#define LPC32XX_GPIO_P3_GRP	(LPC32XX_GPIO_P2_GRP + LPC32XX_GPIO_P2_MAX)
+#define LPC32XX_GPI_P3_GRP	(LPC32XX_GPIO_P3_GRP + LPC32XX_GPIO_P3_MAX)
+#define LPC32XX_GPO_P3_GRP	(LPC32XX_GPI_P3_GRP + LPC32XX_GPI_P3_MAX)
+
+struct gpio_regs {
+	unsigned long inp_state;
+	unsigned long outp_state;
+	unsigned long outp_set;
+	unsigned long outp_clr;
+	unsigned long dir_set;
+	unsigned long dir_clr;
+};
+
+/*
+ * GPIO names
+ */
+static const char *gpio_p0_names[LPC32XX_GPIO_P0_MAX] = {
+	"p0.0", "p0.1", "p0.2", "p0.3",
+	"p0.4", "p0.5", "p0.6", "p0.7"
+};
+
+static const char *gpio_p1_names[LPC32XX_GPIO_P1_MAX] = {
+	"p1.0", "p1.1", "p1.2", "p1.3",
+	"p1.4", "p1.5", "p1.6", "p1.7",
+	"p1.8", "p1.9", "p1.10", "p1.11",
+	"p1.12", "p1.13", "p1.14", "p1.15",
+	"p1.16", "p1.17", "p1.18", "p1.19",
+	"p1.20", "p1.21", "p1.22", "p1.23",
+};
+
+static const char *gpio_p2_names[LPC32XX_GPIO_P2_MAX] = {
+	"p2.0", "p2.1", "p2.2", "p2.3",
+	"p2.4", "p2.5", "p2.6", "p2.7",
+	"p2.8", "p2.9", "p2.10", "p2.11",
+	"p2.12"
+};
+
+static const char *gpio_p3_names[LPC32XX_GPIO_P3_MAX] = {
+	"gpio00", "gpio01", "gpio02", "gpio03",
+	"gpio04", "gpio05"
+};
+
+static const char *gpi_p3_names[LPC32XX_GPI_P3_MAX] = {
+	"gpi00", "gpi01", "gpi02", "gpi03",
+	"gpi04", "gpi05", "gpi06", "gpi07",
+	"gpi08", "gpi09",  NULL,    NULL,
+	 NULL,    NULL,    NULL,   "gpi15",
+	"gpi16", "gpi17", "gpi18", "gpi19",
+	"gpi20", "gpi21", "gpi22", "gpi23",
+	"gpi24", "gpi25", "gpi26", "gpi27",
+	"gpi28"
+};
+
+static const char *gpo_p3_names[LPC32XX_GPO_P3_MAX] = {
+	"gpo00", "gpo01", "gpo02", "gpo03",
+	"gpo04", "gpo05", "gpo06", "gpo07",
+	"gpo08", "gpo09", "gpo10", "gpo11",
+	"gpo12", "gpo13", "gpo14", "gpo15",
+	"gpo16", "gpo17", "gpo18", "gpo19",
+	"gpo20", "gpo21", "gpo22", "gpo23"
+};
+
+static struct gpio_regs gpio_grp_regs_p0 = {
+	.inp_state	= LPC32XX_GPIO_P0_INP_STATE,
+	.outp_set	= LPC32XX_GPIO_P0_OUTP_SET,
+	.outp_clr	= LPC32XX_GPIO_P0_OUTP_CLR,
+	.dir_set	= LPC32XX_GPIO_P0_DIR_SET,
+	.dir_clr	= LPC32XX_GPIO_P0_DIR_CLR,
+};
+
+static struct gpio_regs gpio_grp_regs_p1 = {
+	.inp_state	= LPC32XX_GPIO_P1_INP_STATE,
+	.outp_set	= LPC32XX_GPIO_P1_OUTP_SET,
+	.outp_clr	= LPC32XX_GPIO_P1_OUTP_CLR,
+	.dir_set	= LPC32XX_GPIO_P1_DIR_SET,
+	.dir_clr	= LPC32XX_GPIO_P1_DIR_CLR,
+};
+
+static struct gpio_regs gpio_grp_regs_p2 = {
+	.inp_state	= LPC32XX_GPIO_P2_INP_STATE,
+	.outp_set	= LPC32XX_GPIO_P2_OUTP_SET,
+	.outp_clr	= LPC32XX_GPIO_P2_OUTP_CLR,
+	.dir_set	= LPC32XX_GPIO_P2_DIR_SET,
+	.dir_clr	= LPC32XX_GPIO_P2_DIR_CLR,
+};
+
+static struct gpio_regs gpio_grp_regs_p3 = {
+	.inp_state	= LPC32XX_GPIO_P3_INP_STATE,
+	.outp_state	= LPC32XX_GPIO_P3_OUTP_STATE,
+	.outp_set	= LPC32XX_GPIO_P3_OUTP_SET,
+	.outp_clr	= LPC32XX_GPIO_P3_OUTP_CLR,
+	.dir_set	= LPC32XX_GPIO_P2_DIR_SET,
+	.dir_clr	= LPC32XX_GPIO_P2_DIR_CLR,
+};
+
+struct lpc32xx_gpio_chip {
+	struct gpio_chip	chip;
+	struct gpio_regs	*gpio_grp;
+	void __iomem		*reg_base;
+};
+
+static inline u32 gpreg_read(struct lpc32xx_gpio_chip *group, unsigned long offset)
+{
+	return __raw_readl(group->reg_base + offset);
+}
+
+static inline void gpreg_write(struct lpc32xx_gpio_chip *group, u32 val, unsigned long offset)
+{
+	__raw_writel(val, group->reg_base + offset);
+}
+
+static void __set_gpio_dir_p012(struct lpc32xx_gpio_chip *group,
+	unsigned pin, int input)
+{
+	if (input)
+		gpreg_write(group, GPIO012_PIN_TO_BIT(pin),
+			group->gpio_grp->dir_clr);
+	else
+		gpreg_write(group, GPIO012_PIN_TO_BIT(pin),
+			group->gpio_grp->dir_set);
+}
+
+static void __set_gpio_dir_p3(struct lpc32xx_gpio_chip *group,
+	unsigned pin, int input)
+{
+	u32 u = GPIO3_PIN_TO_BIT(pin);
+
+	if (input)
+		gpreg_write(group, u, group->gpio_grp->dir_clr);
+	else
+		gpreg_write(group, u, group->gpio_grp->dir_set);
+}
+
+static void __set_gpio_level_p012(struct lpc32xx_gpio_chip *group,
+	unsigned pin, int high)
+{
+	if (high)
+		gpreg_write(group, GPIO012_PIN_TO_BIT(pin),
+			group->gpio_grp->outp_set);
+	else
+		gpreg_write(group, GPIO012_PIN_TO_BIT(pin),
+			group->gpio_grp->outp_clr);
+}
+
+static void __set_gpio_level_p3(struct lpc32xx_gpio_chip *group,
+	unsigned pin, int high)
+{
+	u32 u = GPIO3_PIN_TO_BIT(pin);
+
+	if (high)
+		gpreg_write(group, u, group->gpio_grp->outp_set);
+	else
+		gpreg_write(group, u, group->gpio_grp->outp_clr);
+}
+
+static void __set_gpo_level_p3(struct lpc32xx_gpio_chip *group,
+	unsigned pin, int high)
+{
+	if (high)
+		gpreg_write(group, GPO3_PIN_TO_BIT(pin), group->gpio_grp->outp_set);
+	else
+		gpreg_write(group, GPO3_PIN_TO_BIT(pin), group->gpio_grp->outp_clr);
+}
+
+static int __get_gpio_state_p012(struct lpc32xx_gpio_chip *group,
+	unsigned pin)
+{
+	return GPIO012_PIN_IN_SEL(gpreg_read(group, group->gpio_grp->inp_state),
+		pin);
+}
+
+static int __get_gpio_state_p3(struct lpc32xx_gpio_chip *group,
+	unsigned pin)
+{
+	int state = gpreg_read(group, group->gpio_grp->inp_state);
+
+	/*
+	 * P3 GPIO pin input mapping is not contiguous, GPIOP3-0..4 is mapped
+	 * to bits 10..14, while GPIOP3-5 is mapped to bit 24.
+	 */
+	return GPIO3_PIN_IN_SEL(state, pin);
+}
+
+static int __get_gpi_state_p3(struct lpc32xx_gpio_chip *group,
+	unsigned pin)
+{
+	return GPI3_PIN_IN_SEL(gpreg_read(group, group->gpio_grp->inp_state), pin);
+}
+
+static int __get_gpo_state_p3(struct lpc32xx_gpio_chip *group,
+	unsigned pin)
+{
+	return GPO3_PIN_IN_SEL(gpreg_read(group, group->gpio_grp->outp_state), pin);
+}
+
+/*
+ * GPIO primitives.
+ */
+static int lpc32xx_gpio_dir_input_p012(struct gpio_chip *chip,
+	unsigned pin)
+{
+	struct lpc32xx_gpio_chip *group = gpiochip_get_data(chip);
+
+	__set_gpio_dir_p012(group, pin, 1);
+
+	return 0;
+}
+
+static int lpc32xx_gpio_dir_input_p3(struct gpio_chip *chip,
+	unsigned pin)
+{
+	struct lpc32xx_gpio_chip *group = gpiochip_get_data(chip);
+
+	__set_gpio_dir_p3(group, pin, 1);
+
+	return 0;
+}
+
+static int lpc32xx_gpio_dir_in_always(struct gpio_chip *chip,
+	unsigned pin)
+{
+	return 0;
+}
+
+static int lpc32xx_gpio_get_value_p012(struct gpio_chip *chip, unsigned pin)
+{
+	struct lpc32xx_gpio_chip *group = gpiochip_get_data(chip);
+
+	return !!__get_gpio_state_p012(group, pin);
+}
+
+static int lpc32xx_gpio_get_value_p3(struct gpio_chip *chip, unsigned pin)
+{
+	struct lpc32xx_gpio_chip *group = gpiochip_get_data(chip);
+
+	return !!__get_gpio_state_p3(group, pin);
+}
+
+static int lpc32xx_gpi_get_value(struct gpio_chip *chip, unsigned pin)
+{
+	struct lpc32xx_gpio_chip *group = gpiochip_get_data(chip);
+
+	return !!__get_gpi_state_p3(group, pin);
+}
+
+static int lpc32xx_gpio_dir_output_p012(struct gpio_chip *chip, unsigned pin,
+	int value)
+{
+	struct lpc32xx_gpio_chip *group = gpiochip_get_data(chip);
+
+	__set_gpio_level_p012(group, pin, value);
+	__set_gpio_dir_p012(group, pin, 0);
+
+	return 0;
+}
+
+static int lpc32xx_gpio_dir_output_p3(struct gpio_chip *chip, unsigned pin,
+	int value)
+{
+	struct lpc32xx_gpio_chip *group = gpiochip_get_data(chip);
+
+	__set_gpio_level_p3(group, pin, value);
+	__set_gpio_dir_p3(group, pin, 0);
+
+	return 0;
+}
+
+static int lpc32xx_gpio_dir_out_always(struct gpio_chip *chip, unsigned pin,
+	int value)
+{
+	struct lpc32xx_gpio_chip *group = gpiochip_get_data(chip);
+
+	__set_gpo_level_p3(group, pin, value);
+	return 0;
+}
+
+static void lpc32xx_gpio_set_value_p012(struct gpio_chip *chip, unsigned pin,
+	int value)
+{
+	struct lpc32xx_gpio_chip *group = gpiochip_get_data(chip);
+
+	__set_gpio_level_p012(group, pin, value);
+}
+
+static void lpc32xx_gpio_set_value_p3(struct gpio_chip *chip, unsigned pin,
+	int value)
+{
+	struct lpc32xx_gpio_chip *group = gpiochip_get_data(chip);
+
+	__set_gpio_level_p3(group, pin, value);
+}
+
+static void lpc32xx_gpo_set_value(struct gpio_chip *chip, unsigned pin,
+	int value)
+{
+	struct lpc32xx_gpio_chip *group = gpiochip_get_data(chip);
+
+	__set_gpo_level_p3(group, pin, value);
+}
+
+static int lpc32xx_gpo_get_value(struct gpio_chip *chip, unsigned pin)
+{
+	struct lpc32xx_gpio_chip *group = gpiochip_get_data(chip);
+
+	return !!__get_gpo_state_p3(group, pin);
+}
+
+static int lpc32xx_gpio_request(struct gpio_chip *chip, unsigned pin)
+{
+	if (pin < chip->ngpio)
+		return 0;
+
+	return -EINVAL;
+}
+
+static int lpc32xx_gpio_to_irq_p01(struct gpio_chip *chip, unsigned offset)
+{
+	return -ENXIO;
+}
+
+static int lpc32xx_gpio_to_irq_gpio_p3(struct gpio_chip *chip, unsigned offset)
+{
+	return -ENXIO;
+}
+
+static int lpc32xx_gpio_to_irq_gpi_p3(struct gpio_chip *chip, unsigned offset)
+{
+	return -ENXIO;
+}
+
+static struct lpc32xx_gpio_chip lpc32xx_gpiochip[] = {
+	{
+		.chip = {
+			.label			= "gpio_p0",
+			.direction_input	= lpc32xx_gpio_dir_input_p012,
+			.get			= lpc32xx_gpio_get_value_p012,
+			.direction_output	= lpc32xx_gpio_dir_output_p012,
+			.set			= lpc32xx_gpio_set_value_p012,
+			.request		= lpc32xx_gpio_request,
+			.to_irq			= lpc32xx_gpio_to_irq_p01,
+			.base			= LPC32XX_GPIO_P0_GRP,
+			.ngpio			= LPC32XX_GPIO_P0_MAX,
+			.names			= gpio_p0_names,
+			.can_sleep		= false,
+		},
+		.gpio_grp = &gpio_grp_regs_p0,
+	},
+	{
+		.chip = {
+			.label			= "gpio_p1",
+			.direction_input	= lpc32xx_gpio_dir_input_p012,
+			.get			= lpc32xx_gpio_get_value_p012,
+			.direction_output	= lpc32xx_gpio_dir_output_p012,
+			.set			= lpc32xx_gpio_set_value_p012,
+			.request		= lpc32xx_gpio_request,
+			.to_irq			= lpc32xx_gpio_to_irq_p01,
+			.base			= LPC32XX_GPIO_P1_GRP,
+			.ngpio			= LPC32XX_GPIO_P1_MAX,
+			.names			= gpio_p1_names,
+			.can_sleep		= false,
+		},
+		.gpio_grp = &gpio_grp_regs_p1,
+	},
+	{
+		.chip = {
+			.label			= "gpio_p2",
+			.direction_input	= lpc32xx_gpio_dir_input_p012,
+			.get			= lpc32xx_gpio_get_value_p012,
+			.direction_output	= lpc32xx_gpio_dir_output_p012,
+			.set			= lpc32xx_gpio_set_value_p012,
+			.request		= lpc32xx_gpio_request,
+			.base			= LPC32XX_GPIO_P2_GRP,
+			.ngpio			= LPC32XX_GPIO_P2_MAX,
+			.names			= gpio_p2_names,
+			.can_sleep		= false,
+		},
+		.gpio_grp = &gpio_grp_regs_p2,
+	},
+	{
+		.chip = {
+			.label			= "gpio_p3",
+			.direction_input	= lpc32xx_gpio_dir_input_p3,
+			.get			= lpc32xx_gpio_get_value_p3,
+			.direction_output	= lpc32xx_gpio_dir_output_p3,
+			.set			= lpc32xx_gpio_set_value_p3,
+			.request		= lpc32xx_gpio_request,
+			.to_irq			= lpc32xx_gpio_to_irq_gpio_p3,
+			.base			= LPC32XX_GPIO_P3_GRP,
+			.ngpio			= LPC32XX_GPIO_P3_MAX,
+			.names			= gpio_p3_names,
+			.can_sleep		= false,
+		},
+		.gpio_grp = &gpio_grp_regs_p3,
+	},
+	{
+		.chip = {
+			.label			= "gpi_p3",
+			.direction_input	= lpc32xx_gpio_dir_in_always,
+			.get			= lpc32xx_gpi_get_value,
+			.request		= lpc32xx_gpio_request,
+			.to_irq			= lpc32xx_gpio_to_irq_gpi_p3,
+			.base			= LPC32XX_GPI_P3_GRP,
+			.ngpio			= LPC32XX_GPI_P3_MAX,
+			.names			= gpi_p3_names,
+			.can_sleep		= false,
+		},
+		.gpio_grp = &gpio_grp_regs_p3,
+	},
+	{
+		.chip = {
+			.label			= "gpo_p3",
+			.direction_output	= lpc32xx_gpio_dir_out_always,
+			.set			= lpc32xx_gpo_set_value,
+			.get			= lpc32xx_gpo_get_value,
+			.request		= lpc32xx_gpio_request,
+			.base			= LPC32XX_GPO_P3_GRP,
+			.ngpio			= LPC32XX_GPO_P3_MAX,
+			.names			= gpo_p3_names,
+			.can_sleep		= false,
+		},
+		.gpio_grp = &gpio_grp_regs_p3,
+	},
+};
+
+static int lpc32xx_of_xlate(struct gpio_chip *gc,
+			    const struct of_phandle_args *gpiospec, u32 *flags)
+{
+	/* Is this the correct bank? */
+	u32 bank = gpiospec->args[0];
+	if ((bank >= ARRAY_SIZE(lpc32xx_gpiochip) ||
+	    (gc != &lpc32xx_gpiochip[bank].chip)))
+		return -EINVAL;
+
+	if (flags)
+		*flags = gpiospec->args[2];
+	return gpiospec->args[1];
+}
+
+static int lpc32xx_gpio_probe(struct platform_device *pdev)
+{
+	int i;
+	void __iomem *reg_base;
+
+	reg_base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(reg_base))
+		return PTR_ERR(reg_base);
+
+	for (i = 0; i < ARRAY_SIZE(lpc32xx_gpiochip); i++) {
+		if (pdev->dev.of_node) {
+			lpc32xx_gpiochip[i].chip.of_xlate = lpc32xx_of_xlate;
+			lpc32xx_gpiochip[i].chip.of_gpio_n_cells = 3;
+			lpc32xx_gpiochip[i].chip.of_node = pdev->dev.of_node;
+			lpc32xx_gpiochip[i].reg_base = reg_base;
+		}
+		devm_gpiochip_add_data(&pdev->dev, &lpc32xx_gpiochip[i].chip,
+				  &lpc32xx_gpiochip[i]);
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id lpc32xx_gpio_of_match[] = {
+	{ .compatible = "nxp,lpc3220-gpio", },
+	{ },
+};
+#endif
+
+static struct platform_driver lpc32xx_gpio_driver = {
+	.driver		= {
+		.name	= "lpc32xx-gpio",
+		.of_match_table = of_match_ptr(lpc32xx_gpio_of_match),
+	},
+	.probe		= lpc32xx_gpio_probe,
+};
+
+module_platform_driver(lpc32xx_gpio_driver);
+
+MODULE_AUTHOR("Kevin Wells <kevin.wells@nxp.com>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("GPIO driver for LPC32xx SoC");
diff --git a/drivers/gpio/gpio-madera.c b/drivers/gpio/gpio-madera.c
new file mode 100644
index 000000000..8f38303fc
--- /dev/null
+++ b/drivers/gpio/gpio-madera.c
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * GPIO support for Cirrus Logic Madera codecs
+ *
+ * Copyright (C) 2015-2018 Cirrus Logic
+ */
+
+#include <linux/gpio/driver.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <linux/mfd/madera/core.h>
+#include <linux/mfd/madera/pdata.h>
+#include <linux/mfd/madera/registers.h>
+
+struct madera_gpio {
+	struct madera *madera;
+	/* storage space for the gpio_chip we're using */
+	struct gpio_chip gpio_chip;
+};
+
+static int madera_gpio_get_direction(struct gpio_chip *chip,
+				     unsigned int offset)
+{
+	struct madera_gpio *madera_gpio = gpiochip_get_data(chip);
+	struct madera *madera = madera_gpio->madera;
+	unsigned int reg_offset = 2 * offset;
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(madera->regmap, MADERA_GPIO1_CTRL_2 + reg_offset,
+			  &val);
+	if (ret < 0)
+		return ret;
+
+	if (val & MADERA_GP1_DIR_MASK)
+		return GPIO_LINE_DIRECTION_IN;
+
+	return GPIO_LINE_DIRECTION_OUT;
+}
+
+static int madera_gpio_direction_in(struct gpio_chip *chip, unsigned int offset)
+{
+	struct madera_gpio *madera_gpio = gpiochip_get_data(chip);
+	struct madera *madera = madera_gpio->madera;
+	unsigned int reg_offset = 2 * offset;
+
+	return regmap_update_bits(madera->regmap,
+				  MADERA_GPIO1_CTRL_2 + reg_offset,
+				  MADERA_GP1_DIR_MASK, MADERA_GP1_DIR);
+}
+
+static int madera_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+	struct madera_gpio *madera_gpio = gpiochip_get_data(chip);
+	struct madera *madera = madera_gpio->madera;
+	unsigned int reg_offset = 2 * offset;
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(madera->regmap, MADERA_GPIO1_CTRL_1 + reg_offset,
+			  &val);
+	if (ret < 0)
+		return ret;
+
+	return !!(val & MADERA_GP1_LVL_MASK);
+}
+
+static int madera_gpio_direction_out(struct gpio_chip *chip,
+				     unsigned int offset, int value)
+{
+	struct madera_gpio *madera_gpio = gpiochip_get_data(chip);
+	struct madera *madera = madera_gpio->madera;
+	unsigned int reg_offset = 2 * offset;
+	unsigned int reg_val = value ? MADERA_GP1_LVL : 0;
+	int ret;
+
+	ret = regmap_update_bits(madera->regmap,
+				 MADERA_GPIO1_CTRL_2 + reg_offset,
+				 MADERA_GP1_DIR_MASK, 0);
+	if (ret < 0)
+		return ret;
+
+	return regmap_update_bits(madera->regmap,
+				  MADERA_GPIO1_CTRL_1 + reg_offset,
+				  MADERA_GP1_LVL_MASK, reg_val);
+}
+
+static void madera_gpio_set(struct gpio_chip *chip, unsigned int offset,
+			    int value)
+{
+	struct madera_gpio *madera_gpio = gpiochip_get_data(chip);
+	struct madera *madera = madera_gpio->madera;
+	unsigned int reg_offset = 2 * offset;
+	unsigned int reg_val = value ? MADERA_GP1_LVL : 0;
+	int ret;
+
+	ret = regmap_update_bits(madera->regmap,
+				 MADERA_GPIO1_CTRL_1 + reg_offset,
+				 MADERA_GP1_LVL_MASK, reg_val);
+
+	/* set() doesn't return an error so log a warning */
+	if (ret)
+		dev_warn(madera->dev, "Failed to write to 0x%x (%d)\n",
+			 MADERA_GPIO1_CTRL_1 + reg_offset, ret);
+}
+
+static const struct gpio_chip madera_gpio_chip = {
+	.label			= "madera",
+	.owner			= THIS_MODULE,
+	.request		= gpiochip_generic_request,
+	.free			= gpiochip_generic_free,
+	.get_direction		= madera_gpio_get_direction,
+	.direction_input	= madera_gpio_direction_in,
+	.get			= madera_gpio_get,
+	.direction_output	= madera_gpio_direction_out,
+	.set			= madera_gpio_set,
+	.set_config		= gpiochip_generic_config,
+	.can_sleep		= true,
+};
+
+static int madera_gpio_probe(struct platform_device *pdev)
+{
+	struct madera *madera = dev_get_drvdata(pdev->dev.parent);
+	struct madera_pdata *pdata = &madera->pdata;
+	struct madera_gpio *madera_gpio;
+	int ret;
+
+	madera_gpio = devm_kzalloc(&pdev->dev, sizeof(*madera_gpio),
+				   GFP_KERNEL);
+	if (!madera_gpio)
+		return -ENOMEM;
+
+	madera_gpio->madera = madera;
+
+	/* Construct suitable gpio_chip from the template in madera_gpio_chip */
+	madera_gpio->gpio_chip = madera_gpio_chip;
+	madera_gpio->gpio_chip.parent = pdev->dev.parent;
+
+	switch (madera->type) {
+	case CS47L15:
+		madera_gpio->gpio_chip.ngpio = CS47L15_NUM_GPIOS;
+		break;
+	case CS47L35:
+		madera_gpio->gpio_chip.ngpio = CS47L35_NUM_GPIOS;
+		break;
+	case CS47L85:
+	case WM1840:
+		madera_gpio->gpio_chip.ngpio = CS47L85_NUM_GPIOS;
+		break;
+	case CS47L90:
+	case CS47L91:
+		madera_gpio->gpio_chip.ngpio = CS47L90_NUM_GPIOS;
+		break;
+	case CS42L92:
+	case CS47L92:
+	case CS47L93:
+		madera_gpio->gpio_chip.ngpio = CS47L92_NUM_GPIOS;
+		break;
+	default:
+		dev_err(&pdev->dev, "Unknown chip variant %d\n", madera->type);
+		return -EINVAL;
+	}
+
+	/* We want to be usable on systems that don't use devicetree or acpi */
+	if (pdata->gpio_base)
+		madera_gpio->gpio_chip.base = pdata->gpio_base;
+	else
+		madera_gpio->gpio_chip.base = -1;
+
+	ret = devm_gpiochip_add_data(&pdev->dev,
+				     &madera_gpio->gpio_chip,
+				     madera_gpio);
+	if (ret < 0) {
+		dev_dbg(&pdev->dev, "Could not register gpiochip, %d\n", ret);
+		return ret;
+	}
+
+	/*
+	 * This is part of a composite MFD device which can only be used with
+	 * the corresponding pinctrl driver. On all supported silicon the GPIO
+	 * to pinctrl mapping is fixed in the silicon, so we register it
+	 * explicitly instead of requiring a redundant gpio-ranges in the
+	 * devicetree.
+	 * In any case we also want to work on systems that don't use devicetree
+	 * or acpi.
+	 */
+	ret = gpiochip_add_pin_range(&madera_gpio->gpio_chip, "madera-pinctrl",
+				     0, 0, madera_gpio->gpio_chip.ngpio);
+	if (ret) {
+		dev_dbg(&pdev->dev, "Failed to add pin range (%d)\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static struct platform_driver madera_gpio_driver = {
+	.driver = {
+		.name	= "madera-gpio",
+	},
+	.probe		= madera_gpio_probe,
+};
+
+module_platform_driver(madera_gpio_driver);
+
+MODULE_SOFTDEP("pre: pinctrl-madera");
+MODULE_DESCRIPTION("GPIO interface for Madera codecs");
+MODULE_AUTHOR("Nariman Poushin <nariman@opensource.cirrus.com>");
+MODULE_AUTHOR("Richard Fitzgerald <rf@opensource.cirrus.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:madera-gpio");
diff --git a/drivers/gpio/gpio-max3191x.c b/drivers/gpio/gpio-max3191x.c
new file mode 100644
index 000000000..310d1a248
--- /dev/null
+++ b/drivers/gpio/gpio-max3191x.c
@@ -0,0 +1,499 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * gpio-max3191x.c - GPIO driver for Maxim MAX3191x industrial serializer
+ *
+ * Copyright (C) 2017 KUNBUS GmbH
+ *
+ * The MAX3191x makes 8 digital 24V inputs available via SPI.
+ * Multiple chips can be daisy-chained, the spec does not impose
+ * a limit on the number of chips and neither does this driver.
+ *
+ * Either of two modes is selectable: In 8-bit mode, only the state
+ * of the inputs is clocked out to achieve high readout speeds;
+ * In 16-bit mode, an additional status byte is clocked out with
+ * a CRC and indicator bits for undervoltage and overtemperature.
+ * The driver returns an error instead of potentially bogus data
+ * if any of these fault conditions occur.  However it does allow
+ * readout of non-faulting chips in the same daisy-chain.
+ *
+ * MAX3191x supports four debounce settings and the driver is
+ * capable of configuring these differently for each chip in the
+ * daisy-chain.
+ *
+ * If the chips are hardwired to 8-bit mode ("modesel" pulled high),
+ * gpio-pisosr.c can be used alternatively to this driver.
+ *
+ * https://datasheets.maximintegrated.com/en/ds/MAX31910.pdf
+ * https://datasheets.maximintegrated.com/en/ds/MAX31911.pdf
+ * https://datasheets.maximintegrated.com/en/ds/MAX31912.pdf
+ * https://datasheets.maximintegrated.com/en/ds/MAX31913.pdf
+ * https://datasheets.maximintegrated.com/en/ds/MAX31953-MAX31963.pdf
+ */
+
+#include <linux/bitmap.h>
+#include <linux/bitops.h>
+#include <linux/crc8.h>
+#include <linux/gpio/consumer.h>
+#include <linux/gpio/driver.h>
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+
+enum max3191x_mode {
+	STATUS_BYTE_ENABLED,
+	STATUS_BYTE_DISABLED,
+};
+
+/**
+ * struct max3191x_chip - max3191x daisy-chain
+ * @gpio: GPIO controller struct
+ * @lock: protects read sequences
+ * @nchips: number of chips in the daisy-chain
+ * @mode: current mode, 0 for 16-bit, 1 for 8-bit;
+ *	for simplicity, all chips in the daisy-chain are assumed
+ *	to use the same mode
+ * @modesel_pins: GPIO pins to configure modesel of each chip
+ * @fault_pins: GPIO pins to detect fault of each chip
+ * @db0_pins: GPIO pins to configure debounce of each chip
+ * @db1_pins: GPIO pins to configure debounce of each chip
+ * @mesg: SPI message to perform a readout
+ * @xfer: SPI transfer used by @mesg
+ * @crc_error: bitmap signaling CRC error for each chip
+ * @overtemp: bitmap signaling overtemperature alarm for each chip
+ * @undervolt1: bitmap signaling undervoltage alarm for each chip
+ * @undervolt2: bitmap signaling undervoltage warning for each chip
+ * @fault: bitmap signaling assertion of @fault_pins for each chip
+ * @ignore_uv: whether to ignore undervoltage alarms;
+ *	set by a device property if the chips are powered through
+ *	5VOUT instead of VCC24V, in which case they will constantly
+ *	signal undervoltage;
+ *	for simplicity, all chips in the daisy-chain are assumed
+ *	to be powered the same way
+ */
+struct max3191x_chip {
+	struct gpio_chip gpio;
+	struct mutex lock;
+	u32 nchips;
+	enum max3191x_mode mode;
+	struct gpio_descs *modesel_pins;
+	struct gpio_descs *fault_pins;
+	struct gpio_descs *db0_pins;
+	struct gpio_descs *db1_pins;
+	struct spi_message mesg;
+	struct spi_transfer xfer;
+	unsigned long *crc_error;
+	unsigned long *overtemp;
+	unsigned long *undervolt1;
+	unsigned long *undervolt2;
+	unsigned long *fault;
+	bool ignore_uv;
+};
+
+#define MAX3191X_NGPIO 8
+#define MAX3191X_CRC8_POLYNOMIAL 0xa8 /* (x^5) + x^4 + x^2 + x^0 */
+
+DECLARE_CRC8_TABLE(max3191x_crc8);
+
+static int max3191x_get_direction(struct gpio_chip *gpio, unsigned int offset)
+{
+	return GPIO_LINE_DIRECTION_IN; /* always in */
+}
+
+static int max3191x_direction_input(struct gpio_chip *gpio, unsigned int offset)
+{
+	return 0;
+}
+
+static int max3191x_direction_output(struct gpio_chip *gpio,
+				     unsigned int offset, int value)
+{
+	return -EINVAL;
+}
+
+static void max3191x_set(struct gpio_chip *gpio, unsigned int offset, int value)
+{ }
+
+static void max3191x_set_multiple(struct gpio_chip *gpio, unsigned long *mask,
+				  unsigned long *bits)
+{ }
+
+static unsigned int max3191x_wordlen(struct max3191x_chip *max3191x)
+{
+	return max3191x->mode == STATUS_BYTE_ENABLED ? 2 : 1;
+}
+
+static int max3191x_readout_locked(struct max3191x_chip *max3191x)
+{
+	struct device *dev = max3191x->gpio.parent;
+	struct spi_device *spi = to_spi_device(dev);
+	int val, i, ot = 0, uv1 = 0;
+
+	val = spi_sync(spi, &max3191x->mesg);
+	if (val) {
+		dev_err_ratelimited(dev, "SPI receive error %d\n", val);
+		return val;
+	}
+
+	for (i = 0; i < max3191x->nchips; i++) {
+		if (max3191x->mode == STATUS_BYTE_ENABLED) {
+			u8 in	  = ((u8 *)max3191x->xfer.rx_buf)[i * 2];
+			u8 status = ((u8 *)max3191x->xfer.rx_buf)[i * 2 + 1];
+
+			val = (status & 0xf8) != crc8(max3191x_crc8, &in, 1, 0);
+			__assign_bit(i, max3191x->crc_error, val);
+			if (val)
+				dev_err_ratelimited(dev,
+					"chip %d: CRC error\n", i);
+
+			ot  = (status >> 1) & 1;
+			__assign_bit(i, max3191x->overtemp, ot);
+			if (ot)
+				dev_err_ratelimited(dev,
+					"chip %d: overtemperature\n", i);
+
+			if (!max3191x->ignore_uv) {
+				uv1 = !((status >> 2) & 1);
+				__assign_bit(i, max3191x->undervolt1, uv1);
+				if (uv1)
+					dev_err_ratelimited(dev,
+						"chip %d: undervoltage\n", i);
+
+				val = !(status & 1);
+				__assign_bit(i, max3191x->undervolt2, val);
+				if (val && !uv1)
+					dev_warn_ratelimited(dev,
+						"chip %d: voltage warn\n", i);
+			}
+		}
+
+		if (max3191x->fault_pins && !max3191x->ignore_uv) {
+			/* fault pin shared by all chips or per chip */
+			struct gpio_desc *fault_pin =
+				(max3191x->fault_pins->ndescs == 1)
+					? max3191x->fault_pins->desc[0]
+					: max3191x->fault_pins->desc[i];
+
+			val = gpiod_get_value_cansleep(fault_pin);
+			if (val < 0) {
+				dev_err_ratelimited(dev,
+					"GPIO read error %d\n", val);
+				return val;
+			}
+			__assign_bit(i, max3191x->fault, val);
+			if (val && !uv1 && !ot)
+				dev_err_ratelimited(dev,
+					"chip %d: fault\n", i);
+		}
+	}
+
+	return 0;
+}
+
+static bool max3191x_chip_is_faulting(struct max3191x_chip *max3191x,
+				      unsigned int chipnum)
+{
+	/* without status byte the only diagnostic is the fault pin */
+	if (!max3191x->ignore_uv && test_bit(chipnum, max3191x->fault))
+		return true;
+
+	if (max3191x->mode == STATUS_BYTE_DISABLED)
+		return false;
+
+	return test_bit(chipnum, max3191x->crc_error) ||
+	       test_bit(chipnum, max3191x->overtemp)  ||
+	       (!max3191x->ignore_uv &&
+		test_bit(chipnum, max3191x->undervolt1));
+}
+
+static int max3191x_get(struct gpio_chip *gpio, unsigned int offset)
+{
+	struct max3191x_chip *max3191x = gpiochip_get_data(gpio);
+	int ret, chipnum, wordlen = max3191x_wordlen(max3191x);
+	u8 in;
+
+	mutex_lock(&max3191x->lock);
+	ret = max3191x_readout_locked(max3191x);
+	if (ret)
+		goto out_unlock;
+
+	chipnum = offset / MAX3191X_NGPIO;
+	if (max3191x_chip_is_faulting(max3191x, chipnum)) {
+		ret = -EIO;
+		goto out_unlock;
+	}
+
+	in = ((u8 *)max3191x->xfer.rx_buf)[chipnum * wordlen];
+	ret = (in >> (offset % MAX3191X_NGPIO)) & 1;
+
+out_unlock:
+	mutex_unlock(&max3191x->lock);
+	return ret;
+}
+
+static int max3191x_get_multiple(struct gpio_chip *gpio, unsigned long *mask,
+				 unsigned long *bits)
+{
+	struct max3191x_chip *max3191x = gpiochip_get_data(gpio);
+	const unsigned int wordlen = max3191x_wordlen(max3191x);
+	int ret;
+	unsigned long bit;
+	unsigned long gpio_mask;
+	unsigned long in;
+
+	mutex_lock(&max3191x->lock);
+	ret = max3191x_readout_locked(max3191x);
+	if (ret)
+		goto out_unlock;
+
+	bitmap_zero(bits, gpio->ngpio);
+	for_each_set_clump8(bit, gpio_mask, mask, gpio->ngpio) {
+		unsigned int chipnum = bit / MAX3191X_NGPIO;
+
+		if (max3191x_chip_is_faulting(max3191x, chipnum)) {
+			ret = -EIO;
+			goto out_unlock;
+		}
+
+		in = ((u8 *)max3191x->xfer.rx_buf)[chipnum * wordlen];
+		in &= gpio_mask;
+		bitmap_set_value8(bits, in, bit);
+	}
+
+out_unlock:
+	mutex_unlock(&max3191x->lock);
+	return ret;
+}
+
+static int max3191x_set_config(struct gpio_chip *gpio, unsigned int offset,
+			       unsigned long config)
+{
+	struct max3191x_chip *max3191x = gpiochip_get_data(gpio);
+	u32 debounce, chipnum, db0_val, db1_val;
+
+	if (pinconf_to_config_param(config) != PIN_CONFIG_INPUT_DEBOUNCE)
+		return -ENOTSUPP;
+
+	if (!max3191x->db0_pins || !max3191x->db1_pins)
+		return -EINVAL;
+
+	debounce = pinconf_to_config_argument(config);
+	switch (debounce) {
+	case 0:
+		db0_val = 0;
+		db1_val = 0;
+		break;
+	case 1 ... 25:
+		db0_val = 0;
+		db1_val = 1;
+		break;
+	case 26 ... 750:
+		db0_val = 1;
+		db1_val = 0;
+		break;
+	case 751 ... 3000:
+		db0_val = 1;
+		db1_val = 1;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (max3191x->db0_pins->ndescs == 1)
+		chipnum = 0; /* all chips use the same pair of debounce pins */
+	else
+		chipnum = offset / MAX3191X_NGPIO; /* per chip debounce pins */
+
+	mutex_lock(&max3191x->lock);
+	gpiod_set_value_cansleep(max3191x->db0_pins->desc[chipnum], db0_val);
+	gpiod_set_value_cansleep(max3191x->db1_pins->desc[chipnum], db1_val);
+	mutex_unlock(&max3191x->lock);
+	return 0;
+}
+
+static void gpiod_set_array_single_value_cansleep(unsigned int ndescs,
+						  struct gpio_desc **desc,
+						  struct gpio_array *info,
+						  int value)
+{
+	unsigned long *values;
+
+	values = bitmap_alloc(ndescs, GFP_KERNEL);
+	if (!values)
+		return;
+
+	if (value)
+		bitmap_fill(values, ndescs);
+	else
+		bitmap_zero(values, ndescs);
+
+	gpiod_set_array_value_cansleep(ndescs, desc, info, values);
+	kfree(values);
+}
+
+static struct gpio_descs *devm_gpiod_get_array_optional_count(
+				struct device *dev, const char *con_id,
+				enum gpiod_flags flags, unsigned int expected)
+{
+	struct gpio_descs *descs;
+	int found = gpiod_count(dev, con_id);
+
+	if (found == -ENOENT)
+		return NULL;
+
+	if (found != expected && found != 1) {
+		dev_err(dev, "ignoring %s-gpios: found %d, expected %u or 1\n",
+			con_id, found, expected);
+		return NULL;
+	}
+
+	descs = devm_gpiod_get_array_optional(dev, con_id, flags);
+
+	if (IS_ERR(descs)) {
+		dev_err(dev, "failed to get %s-gpios: %ld\n",
+			con_id, PTR_ERR(descs));
+		return NULL;
+	}
+
+	return descs;
+}
+
+static int max3191x_probe(struct spi_device *spi)
+{
+	struct device *dev = &spi->dev;
+	struct max3191x_chip *max3191x;
+	int n, ret;
+
+	max3191x = devm_kzalloc(dev, sizeof(*max3191x), GFP_KERNEL);
+	if (!max3191x)
+		return -ENOMEM;
+	spi_set_drvdata(spi, max3191x);
+
+	max3191x->nchips = 1;
+	device_property_read_u32(dev, "#daisy-chained-devices",
+				 &max3191x->nchips);
+
+	n = BITS_TO_LONGS(max3191x->nchips);
+	max3191x->crc_error   = devm_kcalloc(dev, n, sizeof(long), GFP_KERNEL);
+	max3191x->undervolt1  = devm_kcalloc(dev, n, sizeof(long), GFP_KERNEL);
+	max3191x->undervolt2  = devm_kcalloc(dev, n, sizeof(long), GFP_KERNEL);
+	max3191x->overtemp    = devm_kcalloc(dev, n, sizeof(long), GFP_KERNEL);
+	max3191x->fault       = devm_kcalloc(dev, n, sizeof(long), GFP_KERNEL);
+	max3191x->xfer.rx_buf = devm_kcalloc(dev, max3191x->nchips,
+								2, GFP_KERNEL);
+	if (!max3191x->crc_error || !max3191x->undervolt1 ||
+	    !max3191x->overtemp  || !max3191x->undervolt2 ||
+	    !max3191x->fault     || !max3191x->xfer.rx_buf)
+		return -ENOMEM;
+
+	max3191x->modesel_pins = devm_gpiod_get_array_optional_count(dev,
+				 "maxim,modesel", GPIOD_ASIS, max3191x->nchips);
+	max3191x->fault_pins   = devm_gpiod_get_array_optional_count(dev,
+				 "maxim,fault", GPIOD_IN, max3191x->nchips);
+	max3191x->db0_pins     = devm_gpiod_get_array_optional_count(dev,
+				 "maxim,db0", GPIOD_OUT_LOW, max3191x->nchips);
+	max3191x->db1_pins     = devm_gpiod_get_array_optional_count(dev,
+				 "maxim,db1", GPIOD_OUT_LOW, max3191x->nchips);
+
+	max3191x->mode = device_property_read_bool(dev, "maxim,modesel-8bit")
+				 ? STATUS_BYTE_DISABLED : STATUS_BYTE_ENABLED;
+	if (max3191x->modesel_pins)
+		gpiod_set_array_single_value_cansleep(
+				 max3191x->modesel_pins->ndescs,
+				 max3191x->modesel_pins->desc,
+				 max3191x->modesel_pins->info, max3191x->mode);
+
+	max3191x->ignore_uv = device_property_read_bool(dev,
+						  "maxim,ignore-undervoltage");
+
+	if (max3191x->db0_pins && max3191x->db1_pins &&
+	    max3191x->db0_pins->ndescs != max3191x->db1_pins->ndescs) {
+		dev_err(dev, "ignoring maxim,db*-gpios: array len mismatch\n");
+		devm_gpiod_put_array(dev, max3191x->db0_pins);
+		devm_gpiod_put_array(dev, max3191x->db1_pins);
+		max3191x->db0_pins = NULL;
+		max3191x->db1_pins = NULL;
+	}
+
+	max3191x->xfer.len = max3191x->nchips * max3191x_wordlen(max3191x);
+	spi_message_init_with_transfers(&max3191x->mesg, &max3191x->xfer, 1);
+
+	max3191x->gpio.label = spi->modalias;
+	max3191x->gpio.owner = THIS_MODULE;
+	max3191x->gpio.parent = dev;
+	max3191x->gpio.base = -1;
+	max3191x->gpio.ngpio = max3191x->nchips * MAX3191X_NGPIO;
+	max3191x->gpio.can_sleep = true;
+
+	max3191x->gpio.get_direction = max3191x_get_direction;
+	max3191x->gpio.direction_input = max3191x_direction_input;
+	max3191x->gpio.direction_output = max3191x_direction_output;
+	max3191x->gpio.set = max3191x_set;
+	max3191x->gpio.set_multiple = max3191x_set_multiple;
+	max3191x->gpio.get = max3191x_get;
+	max3191x->gpio.get_multiple = max3191x_get_multiple;
+	max3191x->gpio.set_config = max3191x_set_config;
+
+	mutex_init(&max3191x->lock);
+
+	ret = gpiochip_add_data(&max3191x->gpio, max3191x);
+	if (ret) {
+		mutex_destroy(&max3191x->lock);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int max3191x_remove(struct spi_device *spi)
+{
+	struct max3191x_chip *max3191x = spi_get_drvdata(spi);
+
+	gpiochip_remove(&max3191x->gpio);
+	mutex_destroy(&max3191x->lock);
+
+	return 0;
+}
+
+static int __init max3191x_register_driver(struct spi_driver *sdrv)
+{
+	crc8_populate_msb(max3191x_crc8, MAX3191X_CRC8_POLYNOMIAL);
+	return spi_register_driver(sdrv);
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id max3191x_of_id[] = {
+	{ .compatible = "maxim,max31910" },
+	{ .compatible = "maxim,max31911" },
+	{ .compatible = "maxim,max31912" },
+	{ .compatible = "maxim,max31913" },
+	{ .compatible = "maxim,max31953" },
+	{ .compatible = "maxim,max31963" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, max3191x_of_id);
+#endif
+
+static const struct spi_device_id max3191x_spi_id[] = {
+	{ "max31910" },
+	{ "max31911" },
+	{ "max31912" },
+	{ "max31913" },
+	{ "max31953" },
+	{ "max31963" },
+	{ }
+};
+MODULE_DEVICE_TABLE(spi, max3191x_spi_id);
+
+static struct spi_driver max3191x_driver = {
+	.driver = {
+		.name		= "max3191x",
+		.of_match_table	= of_match_ptr(max3191x_of_id),
+	},
+	.probe	  = max3191x_probe,
+	.remove	  = max3191x_remove,
+	.id_table = max3191x_spi_id,
+};
+module_driver(max3191x_driver, max3191x_register_driver, spi_unregister_driver);
+
+MODULE_AUTHOR("Lukas Wunner <lukas@wunner.de>");
+MODULE_DESCRIPTION("GPIO driver for Maxim MAX3191x industrial serializer");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-max7300.c b/drivers/gpio/gpio-max7300.c
new file mode 100644
index 000000000..19cc2ed6a
--- /dev/null
+++ b/drivers/gpio/gpio-max7300.c
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2009 Wolfram Sang, Pengutronix
+ *
+ * Check max730x.c for further details.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/i2c.h>
+#include <linux/spi/max7301.h>
+#include <linux/slab.h>
+
+static int max7300_i2c_write(struct device *dev, unsigned int reg,
+				unsigned int val)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	return i2c_smbus_write_byte_data(client, reg, val);
+}
+
+static int max7300_i2c_read(struct device *dev, unsigned int reg)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	return i2c_smbus_read_byte_data(client, reg);
+}
+
+static int max7300_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct max7301 *ts;
+
+	if (!i2c_check_functionality(client->adapter,
+			I2C_FUNC_SMBUS_BYTE_DATA))
+		return -EIO;
+
+	ts = devm_kzalloc(&client->dev, sizeof(struct max7301), GFP_KERNEL);
+	if (!ts)
+		return -ENOMEM;
+
+	ts->read = max7300_i2c_read;
+	ts->write = max7300_i2c_write;
+	ts->dev = &client->dev;
+
+	return __max730x_probe(ts);
+}
+
+static int max7300_remove(struct i2c_client *client)
+{
+	return __max730x_remove(&client->dev);
+}
+
+static const struct i2c_device_id max7300_id[] = {
+	{ "max7300", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, max7300_id);
+
+static struct i2c_driver max7300_driver = {
+	.driver = {
+		.name = "max7300",
+	},
+	.probe = max7300_probe,
+	.remove = max7300_remove,
+	.id_table = max7300_id,
+};
+
+static int __init max7300_init(void)
+{
+	return i2c_add_driver(&max7300_driver);
+}
+subsys_initcall(max7300_init);
+
+static void __exit max7300_exit(void)
+{
+	i2c_del_driver(&max7300_driver);
+}
+module_exit(max7300_exit);
+
+MODULE_AUTHOR("Wolfram Sang");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("MAX7300 GPIO-Expander");
diff --git a/drivers/gpio/gpio-max7301.c b/drivers/gpio/gpio-max7301.c
new file mode 100644
index 000000000..1307c243b
--- /dev/null
+++ b/drivers/gpio/gpio-max7301.c
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2006 Juergen Beisert, Pengutronix
+ * Copyright (C) 2008 Guennadi Liakhovetski, Pengutronix
+ * Copyright (C) 2009 Wolfram Sang, Pengutronix
+ *
+ * Check max730x.c for further details.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/max7301.h>
+
+/* A write to the MAX7301 means one message with one transfer */
+static int max7301_spi_write(struct device *dev, unsigned int reg,
+				unsigned int val)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	u16 word = ((reg & 0x7F) << 8) | (val & 0xFF);
+
+	return spi_write_then_read(spi, &word, sizeof(word), NULL, 0);
+}
+
+/* A read from the MAX7301 means two transfers; here, one message each */
+
+static int max7301_spi_read(struct device *dev, unsigned int reg)
+{
+	int ret;
+	u16 word;
+	struct spi_device *spi = to_spi_device(dev);
+
+	word = 0x8000 | (reg << 8);
+	ret = spi_write_then_read(spi, &word, sizeof(word), &word,
+				  sizeof(word));
+	if (ret)
+		return ret;
+	return word & 0xff;
+}
+
+static int max7301_probe(struct spi_device *spi)
+{
+	struct max7301 *ts;
+	int ret;
+
+	/* bits_per_word cannot be configured in platform data */
+	spi->bits_per_word = 16;
+	ret = spi_setup(spi);
+	if (ret < 0)
+		return ret;
+
+	ts = devm_kzalloc(&spi->dev, sizeof(struct max7301), GFP_KERNEL);
+	if (!ts)
+		return -ENOMEM;
+
+	ts->read = max7301_spi_read;
+	ts->write = max7301_spi_write;
+	ts->dev = &spi->dev;
+
+	ret = __max730x_probe(ts);
+	return ret;
+}
+
+static int max7301_remove(struct spi_device *spi)
+{
+	return __max730x_remove(&spi->dev);
+}
+
+static const struct spi_device_id max7301_id[] = {
+	{ "max7301", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(spi, max7301_id);
+
+static struct spi_driver max7301_driver = {
+	.driver = {
+		.name = "max7301",
+	},
+	.probe = max7301_probe,
+	.remove = max7301_remove,
+	.id_table = max7301_id,
+};
+
+static int __init max7301_init(void)
+{
+	return spi_register_driver(&max7301_driver);
+}
+/* register after spi postcore initcall and before
+ * subsys initcalls that may rely on these GPIOs
+ */
+subsys_initcall(max7301_init);
+
+static void __exit max7301_exit(void)
+{
+	spi_unregister_driver(&max7301_driver);
+}
+module_exit(max7301_exit);
+
+MODULE_AUTHOR("Juergen Beisert, Wolfram Sang");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("MAX7301 GPIO-Expander");
diff --git a/drivers/gpio/gpio-max730x.c b/drivers/gpio/gpio-max730x.c
new file mode 100644
index 000000000..b8c1fe20f
--- /dev/null
+++ b/drivers/gpio/gpio-max730x.c
@@ -0,0 +1,240 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/**
+ * Copyright (C) 2006 Juergen Beisert, Pengutronix
+ * Copyright (C) 2008 Guennadi Liakhovetski, Pengutronix
+ * Copyright (C) 2009 Wolfram Sang, Pengutronix
+ *
+ * The Maxim MAX7300/1 device is an I2C/SPI driven GPIO expander. There are
+ * 28 GPIOs. 8 of them can trigger an interrupt. See datasheet for more
+ * details
+ * Note:
+ * - DIN must be stable at the rising edge of clock.
+ * - when writing:
+ *   - always clock in 16 clocks at once
+ *   - at DIN: D15 first, D0 last
+ *   - D0..D7 = databyte, D8..D14 = commandbyte
+ *   - D15 = low -> write command
+ * - when reading
+ *   - always clock in 16 clocks at once
+ *   - at DIN: D15 first, D0 last
+ *   - D0..D7 = dummy, D8..D14 = register address
+ *   - D15 = high -> read command
+ *   - raise CS and assert it again
+ *   - always clock in 16 clocks at once
+ *   - at DOUT: D15 first, D0 last
+ *   - D0..D7 contains the data from the first cycle
+ *
+ * The driver exports a standard gpiochip interface
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/spi/max7301.h>
+#include <linux/gpio/driver.h>
+#include <linux/slab.h>
+
+/*
+ * Pin configurations, see MAX7301 datasheet page 6
+ */
+#define PIN_CONFIG_MASK 0x03
+#define PIN_CONFIG_IN_PULLUP 0x03
+#define PIN_CONFIG_IN_WO_PULLUP 0x02
+#define PIN_CONFIG_OUT 0x01
+
+#define PIN_NUMBER 28
+
+static int max7301_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct max7301 *ts = container_of(chip, struct max7301, chip);
+	u8 *config;
+	u8 offset_bits, pin_config;
+	int ret;
+
+	/* First 4 pins are unused in the controller */
+	offset += 4;
+	offset_bits = (offset & 3) << 1;
+
+	config = &ts->port_config[offset >> 2];
+
+	if (ts->input_pullup_active & BIT(offset))
+		pin_config = PIN_CONFIG_IN_PULLUP;
+	else
+		pin_config = PIN_CONFIG_IN_WO_PULLUP;
+
+	mutex_lock(&ts->lock);
+
+	*config = (*config & ~(PIN_CONFIG_MASK << offset_bits))
+			   | (pin_config << offset_bits);
+
+	ret = ts->write(ts->dev, 0x08 + (offset >> 2), *config);
+
+	mutex_unlock(&ts->lock);
+
+	return ret;
+}
+
+static int __max7301_set(struct max7301 *ts, unsigned offset, int value)
+{
+	if (value) {
+		ts->out_level |= 1 << offset;
+		return ts->write(ts->dev, 0x20 + offset, 0x01);
+	} else {
+		ts->out_level &= ~(1 << offset);
+		return ts->write(ts->dev, 0x20 + offset, 0x00);
+	}
+}
+
+static int max7301_direction_output(struct gpio_chip *chip, unsigned offset,
+				    int value)
+{
+	struct max7301 *ts = container_of(chip, struct max7301, chip);
+	u8 *config;
+	u8 offset_bits;
+	int ret;
+
+	/* First 4 pins are unused in the controller */
+	offset += 4;
+	offset_bits = (offset & 3) << 1;
+
+	config = &ts->port_config[offset >> 2];
+
+	mutex_lock(&ts->lock);
+
+	*config = (*config & ~(PIN_CONFIG_MASK << offset_bits))
+			   | (PIN_CONFIG_OUT << offset_bits);
+
+	ret = __max7301_set(ts, offset, value);
+
+	if (!ret)
+		ret = ts->write(ts->dev, 0x08 + (offset >> 2), *config);
+
+	mutex_unlock(&ts->lock);
+
+	return ret;
+}
+
+static int max7301_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct max7301 *ts = gpiochip_get_data(chip);
+	int config, level = -EINVAL;
+
+	/* First 4 pins are unused in the controller */
+	offset += 4;
+
+	mutex_lock(&ts->lock);
+
+	config = (ts->port_config[offset >> 2] >> ((offset & 3) << 1))
+			& PIN_CONFIG_MASK;
+
+	switch (config) {
+	case PIN_CONFIG_OUT:
+		/* Output: return cached level */
+		level =  !!(ts->out_level & (1 << offset));
+		break;
+	case PIN_CONFIG_IN_WO_PULLUP:
+	case PIN_CONFIG_IN_PULLUP:
+		/* Input: read out */
+		level = ts->read(ts->dev, 0x20 + offset) & 0x01;
+	}
+	mutex_unlock(&ts->lock);
+
+	return level;
+}
+
+static void max7301_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct max7301 *ts = gpiochip_get_data(chip);
+
+	/* First 4 pins are unused in the controller */
+	offset += 4;
+
+	mutex_lock(&ts->lock);
+
+	__max7301_set(ts, offset, value);
+
+	mutex_unlock(&ts->lock);
+}
+
+int __max730x_probe(struct max7301 *ts)
+{
+	struct device *dev = ts->dev;
+	struct max7301_platform_data *pdata;
+	int i, ret;
+
+	pdata = dev_get_platdata(dev);
+
+	mutex_init(&ts->lock);
+	dev_set_drvdata(dev, ts);
+
+	/* Power up the chip and disable IRQ output */
+	ts->write(dev, 0x04, 0x01);
+
+	if (pdata) {
+		ts->input_pullup_active = pdata->input_pullup_active;
+		ts->chip.base = pdata->base;
+	} else {
+		ts->chip.base = -1;
+	}
+	ts->chip.label = dev->driver->name;
+
+	ts->chip.direction_input = max7301_direction_input;
+	ts->chip.get = max7301_get;
+	ts->chip.direction_output = max7301_direction_output;
+	ts->chip.set = max7301_set;
+
+	ts->chip.ngpio = PIN_NUMBER;
+	ts->chip.can_sleep = true;
+	ts->chip.parent = dev;
+	ts->chip.owner = THIS_MODULE;
+
+	/*
+	 * initialize pullups according to platform data and cache the
+	 * register values for later use.
+	 */
+	for (i = 1; i < 8; i++) {
+		int j;
+		/*
+		 * initialize port_config with "0xAA", which means
+		 * input with internal pullup disabled. This is needed
+		 * to avoid writing zeros (in the inner for loop),
+		 * which is not allowed according to the datasheet.
+		 */
+		ts->port_config[i] = 0xAA;
+		for (j = 0; j < 4; j++) {
+			int offset = (i - 1) * 4 + j;
+			ret = max7301_direction_input(&ts->chip, offset);
+			if (ret)
+				goto exit_destroy;
+		}
+	}
+
+	ret = gpiochip_add_data(&ts->chip, ts);
+	if (!ret)
+		return ret;
+
+exit_destroy:
+	mutex_destroy(&ts->lock);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(__max730x_probe);
+
+int __max730x_remove(struct device *dev)
+{
+	struct max7301 *ts = dev_get_drvdata(dev);
+
+	if (ts == NULL)
+		return -ENODEV;
+
+	/* Power down the chip and disable IRQ output */
+	ts->write(dev, 0x04, 0x00);
+	gpiochip_remove(&ts->chip);
+	mutex_destroy(&ts->lock);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(__max730x_remove);
+
+MODULE_AUTHOR("Juergen Beisert, Wolfram Sang");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("MAX730x GPIO-Expanders, generic parts");
diff --git a/drivers/gpio/gpio-max732x.c b/drivers/gpio/gpio-max732x.c
new file mode 100644
index 000000000..238cbe926
--- /dev/null
+++ b/drivers/gpio/gpio-max732x.c
@@ -0,0 +1,764 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  MAX732x I2C Port Expander with 8/16 I/O
+ *
+ *  Copyright (C) 2007 Marvell International Ltd.
+ *  Copyright (C) 2008 Jack Ren <jack.ren@marvell.com>
+ *  Copyright (C) 2008 Eric Miao <eric.miao@marvell.com>
+ *  Copyright (C) 2015 Linus Walleij <linus.walleij@linaro.org>
+ *
+ *  Derived from drivers/gpio/pca953x.c
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/gpio/driver.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/platform_data/max732x.h>
+#include <linux/of.h>
+
+
+/*
+ * Each port of MAX732x (including MAX7319) falls into one of the
+ * following three types:
+ *
+ *   - Push Pull Output
+ *   - Input
+ *   - Open Drain I/O
+ *
+ * designated by 'O', 'I' and 'P' individually according to MAXIM's
+ * datasheets. 'I' and 'P' ports are interrupt capables, some with
+ * a dedicated interrupt mask.
+ *
+ * There are two groups of I/O ports, each group usually includes
+ * up to 8 I/O ports, and is accessed by a specific I2C address:
+ *
+ *   - Group A : by I2C address 0b'110xxxx
+ *   - Group B : by I2C address 0b'101xxxx
+ *
+ * where 'xxxx' is decided by the connections of pin AD2/AD0.  The
+ * address used also affects the initial state of output signals.
+ *
+ * Within each group of ports, there are five known combinations of
+ * I/O ports: 4I4O, 4P4O, 8I, 8P, 8O, see the definitions below for
+ * the detailed organization of these ports. Only Goup A is interrupt
+ * capable.
+ *
+ * GPIO numbers start from 'gpio_base + 0' to 'gpio_base + 8/16',
+ * and GPIOs from GROUP_A are numbered before those from GROUP_B
+ * (if there are two groups).
+ *
+ * NOTE: MAX7328/MAX7329 are drop-in replacements for PCF8574/a, so
+ * they are not supported by this driver.
+ */
+
+#define PORT_NONE	0x0	/* '/' No Port */
+#define PORT_OUTPUT	0x1	/* 'O' Push-Pull, Output Only */
+#define PORT_INPUT	0x2	/* 'I' Input Only */
+#define PORT_OPENDRAIN	0x3	/* 'P' Open-Drain, I/O */
+
+#define IO_4I4O		0x5AA5	/* O7 O6 I5 I4 I3 I2 O1 O0 */
+#define IO_4P4O		0x5FF5	/* O7 O6 P5 P4 P3 P2 O1 O0 */
+#define IO_8I		0xAAAA	/* I7 I6 I5 I4 I3 I2 I1 I0 */
+#define IO_8P		0xFFFF	/* P7 P6 P5 P4 P3 P2 P1 P0 */
+#define IO_8O		0x5555	/* O7 O6 O5 O4 O3 O2 O1 O0 */
+
+#define GROUP_A(x)	((x) & 0xffff)	/* I2C Addr: 0b'110xxxx */
+#define GROUP_B(x)	((x) << 16)	/* I2C Addr: 0b'101xxxx */
+
+#define INT_NONE	0x0	/* No interrupt capability */
+#define INT_NO_MASK	0x1	/* Has interrupts, no mask */
+#define INT_INDEP_MASK	0x2	/* Has interrupts, independent mask */
+#define INT_MERGED_MASK 0x3	/* Has interrupts, merged mask */
+
+#define INT_CAPS(x)	(((uint64_t)(x)) << 32)
+
+enum {
+	MAX7319,
+	MAX7320,
+	MAX7321,
+	MAX7322,
+	MAX7323,
+	MAX7324,
+	MAX7325,
+	MAX7326,
+	MAX7327,
+};
+
+static uint64_t max732x_features[] = {
+	[MAX7319] = GROUP_A(IO_8I) | INT_CAPS(INT_MERGED_MASK),
+	[MAX7320] = GROUP_B(IO_8O),
+	[MAX7321] = GROUP_A(IO_8P) | INT_CAPS(INT_NO_MASK),
+	[MAX7322] = GROUP_A(IO_4I4O) | INT_CAPS(INT_MERGED_MASK),
+	[MAX7323] = GROUP_A(IO_4P4O) | INT_CAPS(INT_INDEP_MASK),
+	[MAX7324] = GROUP_A(IO_8I) | GROUP_B(IO_8O) | INT_CAPS(INT_MERGED_MASK),
+	[MAX7325] = GROUP_A(IO_8P) | GROUP_B(IO_8O) | INT_CAPS(INT_NO_MASK),
+	[MAX7326] = GROUP_A(IO_4I4O) | GROUP_B(IO_8O) | INT_CAPS(INT_MERGED_MASK),
+	[MAX7327] = GROUP_A(IO_4P4O) | GROUP_B(IO_8O) | INT_CAPS(INT_NO_MASK),
+};
+
+static const struct i2c_device_id max732x_id[] = {
+	{ "max7319", MAX7319 },
+	{ "max7320", MAX7320 },
+	{ "max7321", MAX7321 },
+	{ "max7322", MAX7322 },
+	{ "max7323", MAX7323 },
+	{ "max7324", MAX7324 },
+	{ "max7325", MAX7325 },
+	{ "max7326", MAX7326 },
+	{ "max7327", MAX7327 },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, max732x_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id max732x_of_table[] = {
+	{ .compatible = "maxim,max7319" },
+	{ .compatible = "maxim,max7320" },
+	{ .compatible = "maxim,max7321" },
+	{ .compatible = "maxim,max7322" },
+	{ .compatible = "maxim,max7323" },
+	{ .compatible = "maxim,max7324" },
+	{ .compatible = "maxim,max7325" },
+	{ .compatible = "maxim,max7326" },
+	{ .compatible = "maxim,max7327" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, max732x_of_table);
+#endif
+
+struct max732x_chip {
+	struct gpio_chip gpio_chip;
+
+	struct i2c_client *client;	/* "main" client */
+	struct i2c_client *client_dummy;
+	struct i2c_client *client_group_a;
+	struct i2c_client *client_group_b;
+
+	unsigned int	mask_group_a;
+	unsigned int	dir_input;
+	unsigned int	dir_output;
+
+	struct mutex	lock;
+	uint8_t		reg_out[2];
+
+#ifdef CONFIG_GPIO_MAX732X_IRQ
+	struct mutex		irq_lock;
+	uint8_t			irq_mask;
+	uint8_t			irq_mask_cur;
+	uint8_t			irq_trig_raise;
+	uint8_t			irq_trig_fall;
+	uint8_t			irq_features;
+#endif
+};
+
+static int max732x_writeb(struct max732x_chip *chip, int group_a, uint8_t val)
+{
+	struct i2c_client *client;
+	int ret;
+
+	client = group_a ? chip->client_group_a : chip->client_group_b;
+	ret = i2c_smbus_write_byte(client, val);
+	if (ret < 0) {
+		dev_err(&client->dev, "failed writing\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int max732x_readb(struct max732x_chip *chip, int group_a, uint8_t *val)
+{
+	struct i2c_client *client;
+	int ret;
+
+	client = group_a ? chip->client_group_a : chip->client_group_b;
+	ret = i2c_smbus_read_byte(client);
+	if (ret < 0) {
+		dev_err(&client->dev, "failed reading\n");
+		return ret;
+	}
+
+	*val = (uint8_t)ret;
+	return 0;
+}
+
+static inline int is_group_a(struct max732x_chip *chip, unsigned off)
+{
+	return (1u << off) & chip->mask_group_a;
+}
+
+static int max732x_gpio_get_value(struct gpio_chip *gc, unsigned off)
+{
+	struct max732x_chip *chip = gpiochip_get_data(gc);
+	uint8_t reg_val;
+	int ret;
+
+	ret = max732x_readb(chip, is_group_a(chip, off), &reg_val);
+	if (ret < 0)
+		return ret;
+
+	return !!(reg_val & (1u << (off & 0x7)));
+}
+
+static void max732x_gpio_set_mask(struct gpio_chip *gc, unsigned off, int mask,
+				  int val)
+{
+	struct max732x_chip *chip = gpiochip_get_data(gc);
+	uint8_t reg_out;
+	int ret;
+
+	mutex_lock(&chip->lock);
+
+	reg_out = (off > 7) ? chip->reg_out[1] : chip->reg_out[0];
+	reg_out = (reg_out & ~mask) | (val & mask);
+
+	ret = max732x_writeb(chip, is_group_a(chip, off), reg_out);
+	if (ret < 0)
+		goto out;
+
+	/* update the shadow register then */
+	if (off > 7)
+		chip->reg_out[1] = reg_out;
+	else
+		chip->reg_out[0] = reg_out;
+out:
+	mutex_unlock(&chip->lock);
+}
+
+static void max732x_gpio_set_value(struct gpio_chip *gc, unsigned off, int val)
+{
+	unsigned base = off & ~0x7;
+	uint8_t mask = 1u << (off & 0x7);
+
+	max732x_gpio_set_mask(gc, base, mask, val << (off & 0x7));
+}
+
+static void max732x_gpio_set_multiple(struct gpio_chip *gc,
+				      unsigned long *mask, unsigned long *bits)
+{
+	unsigned mask_lo = mask[0] & 0xff;
+	unsigned mask_hi = (mask[0] >> 8) & 0xff;
+
+	if (mask_lo)
+		max732x_gpio_set_mask(gc, 0, mask_lo, bits[0] & 0xff);
+	if (mask_hi)
+		max732x_gpio_set_mask(gc, 8, mask_hi, (bits[0] >> 8) & 0xff);
+}
+
+static int max732x_gpio_direction_input(struct gpio_chip *gc, unsigned off)
+{
+	struct max732x_chip *chip = gpiochip_get_data(gc);
+	unsigned int mask = 1u << off;
+
+	if ((mask & chip->dir_input) == 0) {
+		dev_dbg(&chip->client->dev, "%s port %d is output only\n",
+			chip->client->name, off);
+		return -EACCES;
+	}
+
+	/*
+	 * Open-drain pins must be set to high impedance (which is
+	 * equivalent to output-high) to be turned into an input.
+	 */
+	if ((mask & chip->dir_output))
+		max732x_gpio_set_value(gc, off, 1);
+
+	return 0;
+}
+
+static int max732x_gpio_direction_output(struct gpio_chip *gc,
+		unsigned off, int val)
+{
+	struct max732x_chip *chip = gpiochip_get_data(gc);
+	unsigned int mask = 1u << off;
+
+	if ((mask & chip->dir_output) == 0) {
+		dev_dbg(&chip->client->dev, "%s port %d is input only\n",
+			chip->client->name, off);
+		return -EACCES;
+	}
+
+	max732x_gpio_set_value(gc, off, val);
+	return 0;
+}
+
+#ifdef CONFIG_GPIO_MAX732X_IRQ
+static int max732x_writew(struct max732x_chip *chip, uint16_t val)
+{
+	int ret;
+
+	val = cpu_to_le16(val);
+
+	ret = i2c_master_send(chip->client_group_a, (char *)&val, 2);
+	if (ret < 0) {
+		dev_err(&chip->client_group_a->dev, "failed writing\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int max732x_readw(struct max732x_chip *chip, uint16_t *val)
+{
+	int ret;
+
+	ret = i2c_master_recv(chip->client_group_a, (char *)val, 2);
+	if (ret < 0) {
+		dev_err(&chip->client_group_a->dev, "failed reading\n");
+		return ret;
+	}
+
+	*val = le16_to_cpu(*val);
+	return 0;
+}
+
+static void max732x_irq_update_mask(struct max732x_chip *chip)
+{
+	uint16_t msg;
+
+	if (chip->irq_mask == chip->irq_mask_cur)
+		return;
+
+	chip->irq_mask = chip->irq_mask_cur;
+
+	if (chip->irq_features == INT_NO_MASK)
+		return;
+
+	mutex_lock(&chip->lock);
+
+	switch (chip->irq_features) {
+	case INT_INDEP_MASK:
+		msg = (chip->irq_mask << 8) | chip->reg_out[0];
+		max732x_writew(chip, msg);
+		break;
+
+	case INT_MERGED_MASK:
+		msg = chip->irq_mask | chip->reg_out[0];
+		max732x_writeb(chip, 1, (uint8_t)msg);
+		break;
+	}
+
+	mutex_unlock(&chip->lock);
+}
+
+static void max732x_irq_mask(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct max732x_chip *chip = gpiochip_get_data(gc);
+
+	chip->irq_mask_cur &= ~(1 << d->hwirq);
+}
+
+static void max732x_irq_unmask(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct max732x_chip *chip = gpiochip_get_data(gc);
+
+	chip->irq_mask_cur |= 1 << d->hwirq;
+}
+
+static void max732x_irq_bus_lock(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct max732x_chip *chip = gpiochip_get_data(gc);
+
+	mutex_lock(&chip->irq_lock);
+	chip->irq_mask_cur = chip->irq_mask;
+}
+
+static void max732x_irq_bus_sync_unlock(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct max732x_chip *chip = gpiochip_get_data(gc);
+	uint16_t new_irqs;
+	uint16_t level;
+
+	max732x_irq_update_mask(chip);
+
+	new_irqs = chip->irq_trig_fall | chip->irq_trig_raise;
+	while (new_irqs) {
+		level = __ffs(new_irqs);
+		max732x_gpio_direction_input(&chip->gpio_chip, level);
+		new_irqs &= ~(1 << level);
+	}
+
+	mutex_unlock(&chip->irq_lock);
+}
+
+static int max732x_irq_set_type(struct irq_data *d, unsigned int type)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct max732x_chip *chip = gpiochip_get_data(gc);
+	uint16_t off = d->hwirq;
+	uint16_t mask = 1 << off;
+
+	if (!(mask & chip->dir_input)) {
+		dev_dbg(&chip->client->dev, "%s port %d is output only\n",
+			chip->client->name, off);
+		return -EACCES;
+	}
+
+	if (!(type & IRQ_TYPE_EDGE_BOTH)) {
+		dev_err(&chip->client->dev, "irq %d: unsupported type %d\n",
+			d->irq, type);
+		return -EINVAL;
+	}
+
+	if (type & IRQ_TYPE_EDGE_FALLING)
+		chip->irq_trig_fall |= mask;
+	else
+		chip->irq_trig_fall &= ~mask;
+
+	if (type & IRQ_TYPE_EDGE_RISING)
+		chip->irq_trig_raise |= mask;
+	else
+		chip->irq_trig_raise &= ~mask;
+
+	return 0;
+}
+
+static int max732x_irq_set_wake(struct irq_data *data, unsigned int on)
+{
+	struct max732x_chip *chip = irq_data_get_irq_chip_data(data);
+
+	irq_set_irq_wake(chip->client->irq, on);
+	return 0;
+}
+
+static struct irq_chip max732x_irq_chip = {
+	.name			= "max732x",
+	.irq_mask		= max732x_irq_mask,
+	.irq_unmask		= max732x_irq_unmask,
+	.irq_bus_lock		= max732x_irq_bus_lock,
+	.irq_bus_sync_unlock	= max732x_irq_bus_sync_unlock,
+	.irq_set_type		= max732x_irq_set_type,
+	.irq_set_wake		= max732x_irq_set_wake,
+};
+
+static uint8_t max732x_irq_pending(struct max732x_chip *chip)
+{
+	uint8_t cur_stat;
+	uint8_t old_stat;
+	uint8_t trigger;
+	uint8_t pending;
+	uint16_t status;
+	int ret;
+
+	ret = max732x_readw(chip, &status);
+	if (ret)
+		return 0;
+
+	trigger = status >> 8;
+	trigger &= chip->irq_mask;
+
+	if (!trigger)
+		return 0;
+
+	cur_stat = status & 0xFF;
+	cur_stat &= chip->irq_mask;
+
+	old_stat = cur_stat ^ trigger;
+
+	pending = (old_stat & chip->irq_trig_fall) |
+		  (cur_stat & chip->irq_trig_raise);
+	pending &= trigger;
+
+	return pending;
+}
+
+static irqreturn_t max732x_irq_handler(int irq, void *devid)
+{
+	struct max732x_chip *chip = devid;
+	uint8_t pending;
+	uint8_t level;
+
+	pending = max732x_irq_pending(chip);
+
+	if (!pending)
+		return IRQ_HANDLED;
+
+	do {
+		level = __ffs(pending);
+		handle_nested_irq(irq_find_mapping(chip->gpio_chip.irq.domain,
+						   level));
+
+		pending &= ~(1 << level);
+	} while (pending);
+
+	return IRQ_HANDLED;
+}
+
+static int max732x_irq_setup(struct max732x_chip *chip,
+			     const struct i2c_device_id *id)
+{
+	struct i2c_client *client = chip->client;
+	struct max732x_platform_data *pdata = dev_get_platdata(&client->dev);
+	int has_irq = max732x_features[id->driver_data] >> 32;
+	int irq_base = 0;
+	int ret;
+
+	if (((pdata && pdata->irq_base) || client->irq)
+			&& has_irq != INT_NONE) {
+		struct gpio_irq_chip *girq;
+
+		if (pdata)
+			irq_base = pdata->irq_base;
+		chip->irq_features = has_irq;
+		mutex_init(&chip->irq_lock);
+
+		ret = devm_request_threaded_irq(&client->dev, client->irq,
+				NULL, max732x_irq_handler, IRQF_ONESHOT |
+				IRQF_TRIGGER_FALLING | IRQF_SHARED,
+				dev_name(&client->dev), chip);
+		if (ret) {
+			dev_err(&client->dev, "failed to request irq %d\n",
+				client->irq);
+			return ret;
+		}
+
+		girq = &chip->gpio_chip.irq;
+		girq->chip = &max732x_irq_chip;
+		/* This will let us handle the parent IRQ in the driver */
+		girq->parent_handler = NULL;
+		girq->num_parents = 0;
+		girq->parents = NULL;
+		girq->default_type = IRQ_TYPE_NONE;
+		girq->handler = handle_simple_irq;
+		girq->threaded = true;
+		girq->first = irq_base; /* FIXME: get rid of this */
+	}
+
+	return 0;
+}
+
+#else /* CONFIG_GPIO_MAX732X_IRQ */
+static int max732x_irq_setup(struct max732x_chip *chip,
+			     const struct i2c_device_id *id)
+{
+	struct i2c_client *client = chip->client;
+	struct max732x_platform_data *pdata = dev_get_platdata(&client->dev);
+	int has_irq = max732x_features[id->driver_data] >> 32;
+
+	if (((pdata && pdata->irq_base) || client->irq) && has_irq != INT_NONE)
+		dev_warn(&client->dev, "interrupt support not compiled in\n");
+
+	return 0;
+}
+#endif
+
+static int max732x_setup_gpio(struct max732x_chip *chip,
+					const struct i2c_device_id *id,
+					unsigned gpio_start)
+{
+	struct gpio_chip *gc = &chip->gpio_chip;
+	uint32_t id_data = (uint32_t)max732x_features[id->driver_data];
+	int i, port = 0;
+
+	for (i = 0; i < 16; i++, id_data >>= 2) {
+		unsigned int mask = 1 << port;
+
+		switch (id_data & 0x3) {
+		case PORT_OUTPUT:
+			chip->dir_output |= mask;
+			break;
+		case PORT_INPUT:
+			chip->dir_input |= mask;
+			break;
+		case PORT_OPENDRAIN:
+			chip->dir_output |= mask;
+			chip->dir_input |= mask;
+			break;
+		default:
+			continue;
+		}
+
+		if (i < 8)
+			chip->mask_group_a |= mask;
+		port++;
+	}
+
+	if (chip->dir_input)
+		gc->direction_input = max732x_gpio_direction_input;
+	if (chip->dir_output) {
+		gc->direction_output = max732x_gpio_direction_output;
+		gc->set = max732x_gpio_set_value;
+		gc->set_multiple = max732x_gpio_set_multiple;
+	}
+	gc->get = max732x_gpio_get_value;
+	gc->can_sleep = true;
+
+	gc->base = gpio_start;
+	gc->ngpio = port;
+	gc->label = chip->client->name;
+	gc->parent = &chip->client->dev;
+	gc->owner = THIS_MODULE;
+
+	return port;
+}
+
+static struct max732x_platform_data *of_gpio_max732x(struct device *dev)
+{
+	struct max732x_platform_data *pdata;
+
+	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return NULL;
+
+	pdata->gpio_base = -1;
+
+	return pdata;
+}
+
+static int max732x_probe(struct i2c_client *client,
+				   const struct i2c_device_id *id)
+{
+	struct max732x_platform_data *pdata;
+	struct device_node *node;
+	struct max732x_chip *chip;
+	struct i2c_client *c;
+	uint16_t addr_a, addr_b;
+	int ret, nr_port;
+
+	pdata = dev_get_platdata(&client->dev);
+	node = client->dev.of_node;
+
+	if (!pdata && node)
+		pdata = of_gpio_max732x(&client->dev);
+
+	if (!pdata) {
+		dev_dbg(&client->dev, "no platform data\n");
+		return -EINVAL;
+	}
+
+	chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
+	if (chip == NULL)
+		return -ENOMEM;
+	chip->client = client;
+
+	nr_port = max732x_setup_gpio(chip, id, pdata->gpio_base);
+	chip->gpio_chip.parent = &client->dev;
+
+	addr_a = (client->addr & 0x0f) | 0x60;
+	addr_b = (client->addr & 0x0f) | 0x50;
+
+	switch (client->addr & 0x70) {
+	case 0x60:
+		chip->client_group_a = client;
+		if (nr_port > 8) {
+			c = devm_i2c_new_dummy_device(&client->dev,
+						      client->adapter, addr_b);
+			if (IS_ERR(c)) {
+				dev_err(&client->dev,
+					"Failed to allocate I2C device\n");
+				return PTR_ERR(c);
+			}
+			chip->client_group_b = chip->client_dummy = c;
+		}
+		break;
+	case 0x50:
+		chip->client_group_b = client;
+		if (nr_port > 8) {
+			c = devm_i2c_new_dummy_device(&client->dev,
+						      client->adapter, addr_a);
+			if (IS_ERR(c)) {
+				dev_err(&client->dev,
+					"Failed to allocate I2C device\n");
+				return PTR_ERR(c);
+			}
+			chip->client_group_a = chip->client_dummy = c;
+		}
+		break;
+	default:
+		dev_err(&client->dev, "invalid I2C address specified %02x\n",
+				client->addr);
+		return -EINVAL;
+	}
+
+	if (nr_port > 8 && !chip->client_dummy) {
+		dev_err(&client->dev,
+			"Failed to allocate second group I2C device\n");
+		return -ENODEV;
+	}
+
+	mutex_init(&chip->lock);
+
+	ret = max732x_readb(chip, is_group_a(chip, 0), &chip->reg_out[0]);
+	if (ret)
+		return ret;
+	if (nr_port > 8) {
+		ret = max732x_readb(chip, is_group_a(chip, 8), &chip->reg_out[1]);
+		if (ret)
+			return ret;
+	}
+
+	ret = max732x_irq_setup(chip, id);
+	if (ret)
+		return ret;
+
+	ret = devm_gpiochip_add_data(&client->dev, &chip->gpio_chip, chip);
+	if (ret)
+		return ret;
+
+	if (pdata->setup) {
+		ret = pdata->setup(client, chip->gpio_chip.base,
+				chip->gpio_chip.ngpio, pdata->context);
+		if (ret < 0)
+			dev_warn(&client->dev, "setup failed, %d\n", ret);
+	}
+
+	i2c_set_clientdata(client, chip);
+	return 0;
+}
+
+static int max732x_remove(struct i2c_client *client)
+{
+	struct max732x_platform_data *pdata = dev_get_platdata(&client->dev);
+	struct max732x_chip *chip = i2c_get_clientdata(client);
+
+	if (pdata && pdata->teardown) {
+		int ret;
+
+		ret = pdata->teardown(client, chip->gpio_chip.base,
+				chip->gpio_chip.ngpio, pdata->context);
+		if (ret < 0) {
+			dev_err(&client->dev, "%s failed, %d\n",
+					"teardown", ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static struct i2c_driver max732x_driver = {
+	.driver = {
+		.name		= "max732x",
+		.of_match_table	= of_match_ptr(max732x_of_table),
+	},
+	.probe		= max732x_probe,
+	.remove		= max732x_remove,
+	.id_table	= max732x_id,
+};
+
+static int __init max732x_init(void)
+{
+	return i2c_add_driver(&max732x_driver);
+}
+/* register after i2c postcore initcall and before
+ * subsys initcalls that may rely on these GPIOs
+ */
+subsys_initcall(max732x_init);
+
+static void __exit max732x_exit(void)
+{
+	i2c_del_driver(&max732x_driver);
+}
+module_exit(max732x_exit);
+
+MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>");
+MODULE_DESCRIPTION("GPIO expander driver for MAX732X");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/gpio-max77620.c b/drivers/gpio/gpio-max77620.c
new file mode 100644
index 000000000..7c0a9ef0b
--- /dev/null
+++ b/drivers/gpio/gpio-max77620.c
@@ -0,0 +1,369 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * MAXIM MAX77620 GPIO driver
+ *
+ * Copyright (c) 2016, NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#include <linux/gpio/driver.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/max77620.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define GPIO_REG_ADDR(offset) (MAX77620_REG_GPIO0 + offset)
+
+struct max77620_gpio {
+	struct gpio_chip	gpio_chip;
+	struct regmap		*rmap;
+	struct device		*dev;
+	struct mutex		buslock; /* irq_bus_lock */
+	unsigned int		irq_type[MAX77620_GPIO_NR];
+	bool			irq_enabled[MAX77620_GPIO_NR];
+};
+
+static irqreturn_t max77620_gpio_irqhandler(int irq, void *data)
+{
+	struct max77620_gpio *gpio = data;
+	unsigned int value, offset;
+	unsigned long pending;
+	int err;
+
+	err = regmap_read(gpio->rmap, MAX77620_REG_IRQ_LVL2_GPIO, &value);
+	if (err < 0) {
+		dev_err(gpio->dev, "REG_IRQ_LVL2_GPIO read failed: %d\n", err);
+		return IRQ_NONE;
+	}
+
+	pending = value;
+
+	for_each_set_bit(offset, &pending, MAX77620_GPIO_NR) {
+		unsigned int virq;
+
+		virq = irq_find_mapping(gpio->gpio_chip.irq.domain, offset);
+		handle_nested_irq(virq);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void max77620_gpio_irq_mask(struct irq_data *data)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+	struct max77620_gpio *gpio = gpiochip_get_data(chip);
+
+	gpio->irq_enabled[data->hwirq] = false;
+}
+
+static void max77620_gpio_irq_unmask(struct irq_data *data)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+	struct max77620_gpio *gpio = gpiochip_get_data(chip);
+
+	gpio->irq_enabled[data->hwirq] = true;
+}
+
+static int max77620_gpio_set_irq_type(struct irq_data *data, unsigned int type)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+	struct max77620_gpio *gpio = gpiochip_get_data(chip);
+	unsigned int irq_type;
+
+	switch (type) {
+	case IRQ_TYPE_EDGE_RISING:
+		irq_type = MAX77620_CNFG_GPIO_INT_RISING;
+		break;
+
+	case IRQ_TYPE_EDGE_FALLING:
+		irq_type = MAX77620_CNFG_GPIO_INT_FALLING;
+		break;
+
+	case IRQ_TYPE_EDGE_BOTH:
+		irq_type = MAX77620_CNFG_GPIO_INT_RISING |
+			   MAX77620_CNFG_GPIO_INT_FALLING;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	gpio->irq_type[data->hwirq] = irq_type;
+
+	return 0;
+}
+
+static void max77620_gpio_bus_lock(struct irq_data *data)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+	struct max77620_gpio *gpio = gpiochip_get_data(chip);
+
+	mutex_lock(&gpio->buslock);
+}
+
+static void max77620_gpio_bus_sync_unlock(struct irq_data *data)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+	struct max77620_gpio *gpio = gpiochip_get_data(chip);
+	unsigned int value, offset = data->hwirq;
+	int err;
+
+	value = gpio->irq_enabled[offset] ? gpio->irq_type[offset] : 0;
+
+	err = regmap_update_bits(gpio->rmap, GPIO_REG_ADDR(offset),
+				 MAX77620_CNFG_GPIO_INT_MASK, value);
+	if (err < 0)
+		dev_err(chip->parent, "failed to update interrupt mask: %d\n",
+			err);
+
+	mutex_unlock(&gpio->buslock);
+}
+
+static struct irq_chip max77620_gpio_irqchip = {
+	.name		= "max77620-gpio",
+	.irq_mask	= max77620_gpio_irq_mask,
+	.irq_unmask	= max77620_gpio_irq_unmask,
+	.irq_set_type	= max77620_gpio_set_irq_type,
+	.irq_bus_lock	= max77620_gpio_bus_lock,
+	.irq_bus_sync_unlock = max77620_gpio_bus_sync_unlock,
+	.flags		= IRQCHIP_MASK_ON_SUSPEND,
+};
+
+static int max77620_gpio_dir_input(struct gpio_chip *gc, unsigned int offset)
+{
+	struct max77620_gpio *mgpio = gpiochip_get_data(gc);
+	int ret;
+
+	ret = regmap_update_bits(mgpio->rmap, GPIO_REG_ADDR(offset),
+				 MAX77620_CNFG_GPIO_DIR_MASK,
+				 MAX77620_CNFG_GPIO_DIR_INPUT);
+	if (ret < 0)
+		dev_err(mgpio->dev, "CNFG_GPIOx dir update failed: %d\n", ret);
+
+	return ret;
+}
+
+static int max77620_gpio_get(struct gpio_chip *gc, unsigned int offset)
+{
+	struct max77620_gpio *mgpio = gpiochip_get_data(gc);
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(mgpio->rmap, GPIO_REG_ADDR(offset), &val);
+	if (ret < 0) {
+		dev_err(mgpio->dev, "CNFG_GPIOx read failed: %d\n", ret);
+		return ret;
+	}
+
+	if  (val & MAX77620_CNFG_GPIO_DIR_MASK)
+		return !!(val & MAX77620_CNFG_GPIO_INPUT_VAL_MASK);
+	else
+		return !!(val & MAX77620_CNFG_GPIO_OUTPUT_VAL_MASK);
+}
+
+static int max77620_gpio_dir_output(struct gpio_chip *gc, unsigned int offset,
+				    int value)
+{
+	struct max77620_gpio *mgpio = gpiochip_get_data(gc);
+	u8 val;
+	int ret;
+
+	val = (value) ? MAX77620_CNFG_GPIO_OUTPUT_VAL_HIGH :
+				MAX77620_CNFG_GPIO_OUTPUT_VAL_LOW;
+
+	ret = regmap_update_bits(mgpio->rmap, GPIO_REG_ADDR(offset),
+				 MAX77620_CNFG_GPIO_OUTPUT_VAL_MASK, val);
+	if (ret < 0) {
+		dev_err(mgpio->dev, "CNFG_GPIOx val update failed: %d\n", ret);
+		return ret;
+	}
+
+	ret = regmap_update_bits(mgpio->rmap, GPIO_REG_ADDR(offset),
+				 MAX77620_CNFG_GPIO_DIR_MASK,
+				 MAX77620_CNFG_GPIO_DIR_OUTPUT);
+	if (ret < 0)
+		dev_err(mgpio->dev, "CNFG_GPIOx dir update failed: %d\n", ret);
+
+	return ret;
+}
+
+static int max77620_gpio_set_debounce(struct max77620_gpio *mgpio,
+				      unsigned int offset,
+				      unsigned int debounce)
+{
+	u8 val;
+	int ret;
+
+	switch (debounce) {
+	case 0:
+		val = MAX77620_CNFG_GPIO_DBNC_None;
+		break;
+	case 1 ... 8000:
+		val = MAX77620_CNFG_GPIO_DBNC_8ms;
+		break;
+	case 8001 ... 16000:
+		val = MAX77620_CNFG_GPIO_DBNC_16ms;
+		break;
+	case 16001 ... 32000:
+		val = MAX77620_CNFG_GPIO_DBNC_32ms;
+		break;
+	default:
+		dev_err(mgpio->dev, "Illegal value %u\n", debounce);
+		return -EINVAL;
+	}
+
+	ret = regmap_update_bits(mgpio->rmap, GPIO_REG_ADDR(offset),
+				 MAX77620_CNFG_GPIO_DBNC_MASK, val);
+	if (ret < 0)
+		dev_err(mgpio->dev, "CNFG_GPIOx_DBNC update failed: %d\n", ret);
+
+	return ret;
+}
+
+static void max77620_gpio_set(struct gpio_chip *gc, unsigned int offset,
+			      int value)
+{
+	struct max77620_gpio *mgpio = gpiochip_get_data(gc);
+	u8 val;
+	int ret;
+
+	val = (value) ? MAX77620_CNFG_GPIO_OUTPUT_VAL_HIGH :
+				MAX77620_CNFG_GPIO_OUTPUT_VAL_LOW;
+
+	ret = regmap_update_bits(mgpio->rmap, GPIO_REG_ADDR(offset),
+				 MAX77620_CNFG_GPIO_OUTPUT_VAL_MASK, val);
+	if (ret < 0)
+		dev_err(mgpio->dev, "CNFG_GPIO_OUT update failed: %d\n", ret);
+}
+
+static int max77620_gpio_set_config(struct gpio_chip *gc, unsigned int offset,
+				    unsigned long config)
+{
+	struct max77620_gpio *mgpio = gpiochip_get_data(gc);
+
+	switch (pinconf_to_config_param(config)) {
+	case PIN_CONFIG_DRIVE_OPEN_DRAIN:
+		return regmap_update_bits(mgpio->rmap, GPIO_REG_ADDR(offset),
+					  MAX77620_CNFG_GPIO_DRV_MASK,
+					  MAX77620_CNFG_GPIO_DRV_OPENDRAIN);
+	case PIN_CONFIG_DRIVE_PUSH_PULL:
+		return regmap_update_bits(mgpio->rmap, GPIO_REG_ADDR(offset),
+					  MAX77620_CNFG_GPIO_DRV_MASK,
+					  MAX77620_CNFG_GPIO_DRV_PUSHPULL);
+	case PIN_CONFIG_INPUT_DEBOUNCE:
+		return max77620_gpio_set_debounce(mgpio, offset,
+			pinconf_to_config_argument(config));
+	default:
+		break;
+	}
+
+	return -ENOTSUPP;
+}
+
+static int max77620_gpio_irq_init_hw(struct gpio_chip *gc)
+{
+	struct max77620_gpio *gpio = gpiochip_get_data(gc);
+	unsigned int i;
+	int err;
+
+	/*
+	 * GPIO interrupts may be left ON after bootloader, hence let's
+	 * pre-initialize hardware to the expected state by disabling all
+	 * the interrupts.
+	 */
+	for (i = 0; i < MAX77620_GPIO_NR; i++) {
+		err = regmap_update_bits(gpio->rmap, GPIO_REG_ADDR(i),
+					 MAX77620_CNFG_GPIO_INT_MASK, 0);
+		if (err < 0) {
+			dev_err(gpio->dev,
+				"failed to disable interrupt: %d\n", err);
+			return err;
+		}
+	}
+
+	return 0;
+}
+
+static int max77620_gpio_probe(struct platform_device *pdev)
+{
+	struct max77620_chip *chip =  dev_get_drvdata(pdev->dev.parent);
+	struct max77620_gpio *mgpio;
+	struct gpio_irq_chip *girq;
+	unsigned int gpio_irq;
+	int ret;
+
+	ret = platform_get_irq(pdev, 0);
+	if (ret < 0)
+		return ret;
+
+	gpio_irq = ret;
+
+	mgpio = devm_kzalloc(&pdev->dev, sizeof(*mgpio), GFP_KERNEL);
+	if (!mgpio)
+		return -ENOMEM;
+
+	mutex_init(&mgpio->buslock);
+	mgpio->rmap = chip->rmap;
+	mgpio->dev = &pdev->dev;
+
+	mgpio->gpio_chip.label = pdev->name;
+	mgpio->gpio_chip.parent = pdev->dev.parent;
+	mgpio->gpio_chip.direction_input = max77620_gpio_dir_input;
+	mgpio->gpio_chip.get = max77620_gpio_get;
+	mgpio->gpio_chip.direction_output = max77620_gpio_dir_output;
+	mgpio->gpio_chip.set = max77620_gpio_set;
+	mgpio->gpio_chip.set_config = max77620_gpio_set_config;
+	mgpio->gpio_chip.ngpio = MAX77620_GPIO_NR;
+	mgpio->gpio_chip.can_sleep = 1;
+	mgpio->gpio_chip.base = -1;
+
+	girq = &mgpio->gpio_chip.irq;
+	girq->chip = &max77620_gpio_irqchip;
+	/* This will let us handle the parent IRQ in the driver */
+	girq->parent_handler = NULL;
+	girq->num_parents = 0;
+	girq->parents = NULL;
+	girq->default_type = IRQ_TYPE_NONE;
+	girq->handler = handle_edge_irq;
+	girq->init_hw = max77620_gpio_irq_init_hw,
+	girq->threaded = true;
+
+	platform_set_drvdata(pdev, mgpio);
+
+	ret = devm_gpiochip_add_data(&pdev->dev, &mgpio->gpio_chip, mgpio);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "gpio_init: Failed to add max77620_gpio\n");
+		return ret;
+	}
+
+	ret = devm_request_threaded_irq(&pdev->dev, gpio_irq, NULL,
+					max77620_gpio_irqhandler, IRQF_ONESHOT,
+					"max77620-gpio", mgpio);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to request IRQ: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct platform_device_id max77620_gpio_devtype[] = {
+	{ .name = "max77620-gpio", },
+	{ .name = "max20024-gpio", },
+	{},
+};
+MODULE_DEVICE_TABLE(platform, max77620_gpio_devtype);
+
+static struct platform_driver max77620_gpio_driver = {
+	.driver.name	= "max77620-gpio",
+	.probe		= max77620_gpio_probe,
+	.id_table	= max77620_gpio_devtype,
+};
+
+module_platform_driver(max77620_gpio_driver);
+
+MODULE_DESCRIPTION("GPIO interface for MAX77620 and MAX20024 PMIC");
+MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
+MODULE_AUTHOR("Chaitanya Bandi <bandik@nvidia.com>");
+MODULE_ALIAS("platform:max77620-gpio");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-max77650.c b/drivers/gpio/gpio-max77650.c
new file mode 100644
index 000000000..3075f2513
--- /dev/null
+++ b/drivers/gpio/gpio-max77650.c
@@ -0,0 +1,191 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2018 BayLibre SAS
+// Author: Bartosz Golaszewski <bgolaszewski@baylibre.com>
+//
+// GPIO driver for MAXIM 77650/77651 charger/power-supply.
+
+#include <linux/gpio/driver.h>
+#include <linux/i2c.h>
+#include <linux/mfd/max77650.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define MAX77650_GPIO_DIR_MASK		BIT(0)
+#define MAX77650_GPIO_INVAL_MASK	BIT(1)
+#define MAX77650_GPIO_DRV_MASK		BIT(2)
+#define MAX77650_GPIO_OUTVAL_MASK	BIT(3)
+#define MAX77650_GPIO_DEBOUNCE_MASK	BIT(4)
+
+#define MAX77650_GPIO_DIR_OUT		0x00
+#define MAX77650_GPIO_DIR_IN		BIT(0)
+#define MAX77650_GPIO_OUT_LOW		0x00
+#define MAX77650_GPIO_OUT_HIGH		BIT(3)
+#define MAX77650_GPIO_DRV_OPEN_DRAIN	0x00
+#define MAX77650_GPIO_DRV_PUSH_PULL	BIT(2)
+#define MAX77650_GPIO_DEBOUNCE		BIT(4)
+
+#define MAX77650_GPIO_DIR_BITS(_reg) \
+		((_reg) & MAX77650_GPIO_DIR_MASK)
+#define MAX77650_GPIO_INVAL_BITS(_reg) \
+		(((_reg) & MAX77650_GPIO_INVAL_MASK) >> 1)
+
+struct max77650_gpio_chip {
+	struct regmap *map;
+	struct gpio_chip gc;
+	int irq;
+};
+
+static int max77650_gpio_direction_input(struct gpio_chip *gc,
+					 unsigned int offset)
+{
+	struct max77650_gpio_chip *chip = gpiochip_get_data(gc);
+
+	return regmap_update_bits(chip->map,
+				  MAX77650_REG_CNFG_GPIO,
+				  MAX77650_GPIO_DIR_MASK,
+				  MAX77650_GPIO_DIR_IN);
+}
+
+static int max77650_gpio_direction_output(struct gpio_chip *gc,
+					  unsigned int offset, int value)
+{
+	struct max77650_gpio_chip *chip = gpiochip_get_data(gc);
+	int mask, regval;
+
+	mask = MAX77650_GPIO_DIR_MASK | MAX77650_GPIO_OUTVAL_MASK;
+	regval = value ? MAX77650_GPIO_OUT_HIGH : MAX77650_GPIO_OUT_LOW;
+	regval |= MAX77650_GPIO_DIR_OUT;
+
+	return regmap_update_bits(chip->map,
+				  MAX77650_REG_CNFG_GPIO, mask, regval);
+}
+
+static void max77650_gpio_set_value(struct gpio_chip *gc,
+				    unsigned int offset, int value)
+{
+	struct max77650_gpio_chip *chip = gpiochip_get_data(gc);
+	int rv, regval;
+
+	regval = value ? MAX77650_GPIO_OUT_HIGH : MAX77650_GPIO_OUT_LOW;
+
+	rv = regmap_update_bits(chip->map, MAX77650_REG_CNFG_GPIO,
+				MAX77650_GPIO_OUTVAL_MASK, regval);
+	if (rv)
+		dev_err(gc->parent, "cannot set GPIO value: %d\n", rv);
+}
+
+static int max77650_gpio_get_value(struct gpio_chip *gc,
+				   unsigned int offset)
+{
+	struct max77650_gpio_chip *chip = gpiochip_get_data(gc);
+	unsigned int val;
+	int rv;
+
+	rv = regmap_read(chip->map, MAX77650_REG_CNFG_GPIO, &val);
+	if (rv)
+		return rv;
+
+	return MAX77650_GPIO_INVAL_BITS(val);
+}
+
+static int max77650_gpio_get_direction(struct gpio_chip *gc,
+				       unsigned int offset)
+{
+	struct max77650_gpio_chip *chip = gpiochip_get_data(gc);
+	unsigned int val;
+	int rv;
+
+	rv = regmap_read(chip->map, MAX77650_REG_CNFG_GPIO, &val);
+	if (rv)
+		return rv;
+
+	return MAX77650_GPIO_DIR_BITS(val);
+}
+
+static int max77650_gpio_set_config(struct gpio_chip *gc,
+				    unsigned int offset, unsigned long cfg)
+{
+	struct max77650_gpio_chip *chip = gpiochip_get_data(gc);
+
+	switch (pinconf_to_config_param(cfg)) {
+	case PIN_CONFIG_DRIVE_OPEN_DRAIN:
+		return regmap_update_bits(chip->map,
+					  MAX77650_REG_CNFG_GPIO,
+					  MAX77650_GPIO_DRV_MASK,
+					  MAX77650_GPIO_DRV_OPEN_DRAIN);
+	case PIN_CONFIG_DRIVE_PUSH_PULL:
+		return regmap_update_bits(chip->map,
+					  MAX77650_REG_CNFG_GPIO,
+					  MAX77650_GPIO_DRV_MASK,
+					  MAX77650_GPIO_DRV_PUSH_PULL);
+	case PIN_CONFIG_INPUT_DEBOUNCE:
+		return regmap_update_bits(chip->map,
+					  MAX77650_REG_CNFG_GPIO,
+					  MAX77650_GPIO_DEBOUNCE_MASK,
+					  MAX77650_GPIO_DEBOUNCE);
+	default:
+		return -ENOTSUPP;
+	}
+}
+
+static int max77650_gpio_to_irq(struct gpio_chip *gc, unsigned int offset)
+{
+	struct max77650_gpio_chip *chip = gpiochip_get_data(gc);
+
+	return chip->irq;
+}
+
+static int max77650_gpio_probe(struct platform_device *pdev)
+{
+	struct max77650_gpio_chip *chip;
+	struct device *dev, *parent;
+	struct i2c_client *i2c;
+
+	dev = &pdev->dev;
+	parent = dev->parent;
+	i2c = to_i2c_client(parent);
+
+	chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	chip->map = dev_get_regmap(parent, NULL);
+	if (!chip->map)
+		return -ENODEV;
+
+	chip->irq = platform_get_irq_byname(pdev, "GPI");
+	if (chip->irq < 0)
+		return chip->irq;
+
+	chip->gc.base = -1;
+	chip->gc.ngpio = 1;
+	chip->gc.label = i2c->name;
+	chip->gc.parent = dev;
+	chip->gc.owner = THIS_MODULE;
+	chip->gc.can_sleep = true;
+
+	chip->gc.direction_input = max77650_gpio_direction_input;
+	chip->gc.direction_output = max77650_gpio_direction_output;
+	chip->gc.set = max77650_gpio_set_value;
+	chip->gc.get = max77650_gpio_get_value;
+	chip->gc.get_direction = max77650_gpio_get_direction;
+	chip->gc.set_config = max77650_gpio_set_config;
+	chip->gc.to_irq = max77650_gpio_to_irq;
+
+	return devm_gpiochip_add_data(dev, &chip->gc, chip);
+}
+
+static struct platform_driver max77650_gpio_driver = {
+	.driver = {
+		.name = "max77650-gpio",
+	},
+	.probe = max77650_gpio_probe,
+};
+module_platform_driver(max77650_gpio_driver);
+
+MODULE_DESCRIPTION("MAXIM 77650/77651 GPIO driver");
+MODULE_AUTHOR("Bartosz Golaszewski <bgolaszewski@baylibre.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:max77650-gpio");
diff --git a/drivers/gpio/gpio-mb86s7x.c b/drivers/gpio/gpio-mb86s7x.c
new file mode 100644
index 000000000..37c5363e3
--- /dev/null
+++ b/drivers/gpio/gpio-mb86s7x.c
@@ -0,0 +1,246 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  linux/drivers/gpio/gpio-mb86s7x.c
+ *
+ *  Copyright (C) 2015 Fujitsu Semiconductor Limited
+ *  Copyright (C) 2015 Linaro Ltd.
+ */
+
+#include <linux/acpi.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/of_device.h>
+#include <linux/gpio/driver.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+
+#include "gpiolib.h"
+#include "gpiolib-acpi.h"
+
+/*
+ * Only first 8bits of a register correspond to each pin,
+ * so there are 4 registers for 32 pins.
+ */
+#define PDR(x)	(0x0 + x / 8 * 4)
+#define DDR(x)	(0x10 + x / 8 * 4)
+#define PFR(x)	(0x20 + x / 8 * 4)
+
+#define OFFSET(x)	BIT((x) % 8)
+
+struct mb86s70_gpio_chip {
+	struct gpio_chip gc;
+	void __iomem *base;
+	struct clk *clk;
+	spinlock_t lock;
+};
+
+static int mb86s70_gpio_request(struct gpio_chip *gc, unsigned gpio)
+{
+	struct mb86s70_gpio_chip *gchip = gpiochip_get_data(gc);
+	unsigned long flags;
+	u32 val;
+
+	spin_lock_irqsave(&gchip->lock, flags);
+
+	val = readl(gchip->base + PFR(gpio));
+	val &= ~OFFSET(gpio);
+	writel(val, gchip->base + PFR(gpio));
+
+	spin_unlock_irqrestore(&gchip->lock, flags);
+
+	return 0;
+}
+
+static void mb86s70_gpio_free(struct gpio_chip *gc, unsigned gpio)
+{
+	struct mb86s70_gpio_chip *gchip = gpiochip_get_data(gc);
+	unsigned long flags;
+	u32 val;
+
+	spin_lock_irqsave(&gchip->lock, flags);
+
+	val = readl(gchip->base + PFR(gpio));
+	val |= OFFSET(gpio);
+	writel(val, gchip->base + PFR(gpio));
+
+	spin_unlock_irqrestore(&gchip->lock, flags);
+}
+
+static int mb86s70_gpio_direction_input(struct gpio_chip *gc, unsigned gpio)
+{
+	struct mb86s70_gpio_chip *gchip = gpiochip_get_data(gc);
+	unsigned long flags;
+	unsigned char val;
+
+	spin_lock_irqsave(&gchip->lock, flags);
+
+	val = readl(gchip->base + DDR(gpio));
+	val &= ~OFFSET(gpio);
+	writel(val, gchip->base + DDR(gpio));
+
+	spin_unlock_irqrestore(&gchip->lock, flags);
+
+	return 0;
+}
+
+static int mb86s70_gpio_direction_output(struct gpio_chip *gc,
+					 unsigned gpio, int value)
+{
+	struct mb86s70_gpio_chip *gchip = gpiochip_get_data(gc);
+	unsigned long flags;
+	unsigned char val;
+
+	spin_lock_irqsave(&gchip->lock, flags);
+
+	val = readl(gchip->base + PDR(gpio));
+	if (value)
+		val |= OFFSET(gpio);
+	else
+		val &= ~OFFSET(gpio);
+	writel(val, gchip->base + PDR(gpio));
+
+	val = readl(gchip->base + DDR(gpio));
+	val |= OFFSET(gpio);
+	writel(val, gchip->base + DDR(gpio));
+
+	spin_unlock_irqrestore(&gchip->lock, flags);
+
+	return 0;
+}
+
+static int mb86s70_gpio_get(struct gpio_chip *gc, unsigned gpio)
+{
+	struct mb86s70_gpio_chip *gchip = gpiochip_get_data(gc);
+
+	return !!(readl(gchip->base + PDR(gpio)) & OFFSET(gpio));
+}
+
+static void mb86s70_gpio_set(struct gpio_chip *gc, unsigned gpio, int value)
+{
+	struct mb86s70_gpio_chip *gchip = gpiochip_get_data(gc);
+	unsigned long flags;
+	unsigned char val;
+
+	spin_lock_irqsave(&gchip->lock, flags);
+
+	val = readl(gchip->base + PDR(gpio));
+	if (value)
+		val |= OFFSET(gpio);
+	else
+		val &= ~OFFSET(gpio);
+	writel(val, gchip->base + PDR(gpio));
+
+	spin_unlock_irqrestore(&gchip->lock, flags);
+}
+
+static int mb86s70_gpio_to_irq(struct gpio_chip *gc, unsigned int offset)
+{
+	int irq, index;
+
+	for (index = 0;; index++) {
+		irq = platform_get_irq(to_platform_device(gc->parent), index);
+		if (irq < 0)
+			return irq;
+		if (irq == 0)
+			break;
+		if (irq_get_irq_data(irq)->hwirq == offset)
+			return irq;
+	}
+	return -EINVAL;
+}
+
+static int mb86s70_gpio_probe(struct platform_device *pdev)
+{
+	struct mb86s70_gpio_chip *gchip;
+	int ret;
+
+	gchip = devm_kzalloc(&pdev->dev, sizeof(*gchip), GFP_KERNEL);
+	if (gchip == NULL)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, gchip);
+
+	gchip->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(gchip->base))
+		return PTR_ERR(gchip->base);
+
+	gchip->clk = devm_clk_get_optional(&pdev->dev, NULL);
+	if (IS_ERR(gchip->clk))
+		return PTR_ERR(gchip->clk);
+
+	ret = clk_prepare_enable(gchip->clk);
+	if (ret)
+		return ret;
+
+	spin_lock_init(&gchip->lock);
+
+	gchip->gc.direction_output = mb86s70_gpio_direction_output;
+	gchip->gc.direction_input = mb86s70_gpio_direction_input;
+	gchip->gc.request = mb86s70_gpio_request;
+	gchip->gc.free = mb86s70_gpio_free;
+	gchip->gc.get = mb86s70_gpio_get;
+	gchip->gc.set = mb86s70_gpio_set;
+	gchip->gc.to_irq = mb86s70_gpio_to_irq;
+	gchip->gc.label = dev_name(&pdev->dev);
+	gchip->gc.ngpio = 32;
+	gchip->gc.owner = THIS_MODULE;
+	gchip->gc.parent = &pdev->dev;
+	gchip->gc.base = -1;
+
+	ret = gpiochip_add_data(&gchip->gc, gchip);
+	if (ret) {
+		dev_err(&pdev->dev, "couldn't register gpio driver\n");
+		clk_disable_unprepare(gchip->clk);
+		return ret;
+	}
+
+	acpi_gpiochip_request_interrupts(&gchip->gc);
+
+	return 0;
+}
+
+static int mb86s70_gpio_remove(struct platform_device *pdev)
+{
+	struct mb86s70_gpio_chip *gchip = platform_get_drvdata(pdev);
+
+	acpi_gpiochip_free_interrupts(&gchip->gc);
+	gpiochip_remove(&gchip->gc);
+	clk_disable_unprepare(gchip->clk);
+
+	return 0;
+}
+
+static const struct of_device_id mb86s70_gpio_dt_ids[] = {
+	{ .compatible = "fujitsu,mb86s70-gpio" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mb86s70_gpio_dt_ids);
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id mb86s70_gpio_acpi_ids[] = {
+	{ "SCX0007" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(acpi, mb86s70_gpio_acpi_ids);
+#endif
+
+static struct platform_driver mb86s70_gpio_driver = {
+	.driver = {
+		.name = "mb86s70-gpio",
+		.of_match_table = mb86s70_gpio_dt_ids,
+		.acpi_match_table = ACPI_PTR(mb86s70_gpio_acpi_ids),
+	},
+	.probe = mb86s70_gpio_probe,
+	.remove = mb86s70_gpio_remove,
+};
+module_platform_driver(mb86s70_gpio_driver);
+
+MODULE_DESCRIPTION("MB86S7x GPIO Driver");
+MODULE_ALIAS("platform:mb86s70-gpio");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/gpio-mc33880.c b/drivers/gpio/gpio-mc33880.c
new file mode 100644
index 000000000..f8194f7c6
--- /dev/null
+++ b/drivers/gpio/gpio-mc33880.c
@@ -0,0 +1,176 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * MC33880 high-side/low-side switch GPIO driver
+ * Copyright (c) 2009 Intel Corporation
+ */
+
+/* Supports:
+ * Freescale MC33880 high-side/low-side switch
+ */
+
+#include <linux/init.h>
+#include <linux/mutex.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/mc33880.h>
+#include <linux/gpio/driver.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+
+#define DRIVER_NAME "mc33880"
+
+/*
+ * Pin configurations, see MAX7301 datasheet page 6
+ */
+#define PIN_CONFIG_MASK 0x03
+#define PIN_CONFIG_IN_PULLUP 0x03
+#define PIN_CONFIG_IN_WO_PULLUP 0x02
+#define PIN_CONFIG_OUT 0x01
+
+#define PIN_NUMBER 8
+
+
+/*
+ * Some registers must be read back to modify.
+ * To save time we cache them here in memory
+ */
+struct mc33880 {
+	struct mutex	lock;	/* protect from simultaneous accesses */
+	u8		port_config;
+	struct gpio_chip chip;
+	struct spi_device *spi;
+};
+
+static int mc33880_write_config(struct mc33880 *mc)
+{
+	return spi_write(mc->spi, &mc->port_config, sizeof(mc->port_config));
+}
+
+
+static int __mc33880_set(struct mc33880 *mc, unsigned offset, int value)
+{
+	if (value)
+		mc->port_config |= 1 << offset;
+	else
+		mc->port_config &= ~(1 << offset);
+
+	return mc33880_write_config(mc);
+}
+
+
+static void mc33880_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct mc33880 *mc = gpiochip_get_data(chip);
+
+	mutex_lock(&mc->lock);
+
+	__mc33880_set(mc, offset, value);
+
+	mutex_unlock(&mc->lock);
+}
+
+static int mc33880_probe(struct spi_device *spi)
+{
+	struct mc33880 *mc;
+	struct mc33880_platform_data *pdata;
+	int ret;
+
+	pdata = dev_get_platdata(&spi->dev);
+	if (!pdata || !pdata->base) {
+		dev_dbg(&spi->dev, "incorrect or missing platform data\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * bits_per_word cannot be configured in platform data
+	 */
+	spi->bits_per_word = 8;
+
+	ret = spi_setup(spi);
+	if (ret < 0)
+		return ret;
+
+	mc = devm_kzalloc(&spi->dev, sizeof(struct mc33880), GFP_KERNEL);
+	if (!mc)
+		return -ENOMEM;
+
+	mutex_init(&mc->lock);
+
+	spi_set_drvdata(spi, mc);
+
+	mc->spi = spi;
+
+	mc->chip.label = DRIVER_NAME,
+	mc->chip.set = mc33880_set;
+	mc->chip.base = pdata->base;
+	mc->chip.ngpio = PIN_NUMBER;
+	mc->chip.can_sleep = true;
+	mc->chip.parent = &spi->dev;
+	mc->chip.owner = THIS_MODULE;
+
+	mc->port_config = 0x00;
+	/* write twice, because during initialisation the first setting
+	 * is just for testing SPI communication, and the second is the
+	 * "real" configuration
+	 */
+	ret = mc33880_write_config(mc);
+	mc->port_config = 0x00;
+	if (!ret)
+		ret = mc33880_write_config(mc);
+
+	if (ret) {
+		dev_err(&spi->dev, "Failed writing to " DRIVER_NAME ": %d\n",
+			ret);
+		goto exit_destroy;
+	}
+
+	ret = gpiochip_add_data(&mc->chip, mc);
+	if (ret)
+		goto exit_destroy;
+
+	return ret;
+
+exit_destroy:
+	mutex_destroy(&mc->lock);
+	return ret;
+}
+
+static int mc33880_remove(struct spi_device *spi)
+{
+	struct mc33880 *mc;
+
+	mc = spi_get_drvdata(spi);
+	if (!mc)
+		return -ENODEV;
+
+	gpiochip_remove(&mc->chip);
+	mutex_destroy(&mc->lock);
+
+	return 0;
+}
+
+static struct spi_driver mc33880_driver = {
+	.driver = {
+		.name		= DRIVER_NAME,
+	},
+	.probe		= mc33880_probe,
+	.remove		= mc33880_remove,
+};
+
+static int __init mc33880_init(void)
+{
+	return spi_register_driver(&mc33880_driver);
+}
+/* register after spi postcore initcall and before
+ * subsys initcalls that may rely on these GPIOs
+ */
+subsys_initcall(mc33880_init);
+
+static void __exit mc33880_exit(void)
+{
+	spi_unregister_driver(&mc33880_driver);
+}
+module_exit(mc33880_exit);
+
+MODULE_AUTHOR("Mocean Laboratories <info@mocean-labs.com>");
+MODULE_LICENSE("GPL v2");
+
diff --git a/drivers/gpio/gpio-mc9s08dz60.c b/drivers/gpio/gpio-mc9s08dz60.c
new file mode 100644
index 000000000..a9f17cebd
--- /dev/null
+++ b/drivers/gpio/gpio-mc9s08dz60.c
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2009-2012 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * Author: Wu Guoxing <b39297@freescale.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/gpio/driver.h>
+
+#define GPIO_GROUP_NUM 2
+#define GPIO_NUM_PER_GROUP 8
+#define GPIO_NUM (GPIO_GROUP_NUM*GPIO_NUM_PER_GROUP)
+
+struct mc9s08dz60 {
+	struct i2c_client *client;
+	struct gpio_chip chip;
+};
+
+static void mc9s_gpio_to_reg_and_bit(int offset, u8 *reg, u8 *bit)
+{
+	*reg = 0x20 + offset / GPIO_NUM_PER_GROUP;
+	*bit = offset % GPIO_NUM_PER_GROUP;
+}
+
+static int mc9s08dz60_get_value(struct gpio_chip *gc, unsigned offset)
+{
+	u8 reg, bit;
+	s32 value;
+	struct mc9s08dz60 *mc9s = gpiochip_get_data(gc);
+
+	mc9s_gpio_to_reg_and_bit(offset, &reg, &bit);
+	value = i2c_smbus_read_byte_data(mc9s->client, reg);
+
+	return (value >= 0) ? (value >> bit) & 0x1 : 0;
+}
+
+static int mc9s08dz60_set(struct mc9s08dz60 *mc9s, unsigned offset, int val)
+{
+	u8 reg, bit;
+	s32 value;
+
+	mc9s_gpio_to_reg_and_bit(offset, &reg, &bit);
+	value = i2c_smbus_read_byte_data(mc9s->client, reg);
+	if (value >= 0) {
+		if (val)
+			value |= 1 << bit;
+		else
+			value &= ~(1 << bit);
+
+		return i2c_smbus_write_byte_data(mc9s->client, reg, value);
+	} else
+		return value;
+
+}
+
+
+static void mc9s08dz60_set_value(struct gpio_chip *gc, unsigned offset, int val)
+{
+	struct mc9s08dz60 *mc9s = gpiochip_get_data(gc);
+
+	mc9s08dz60_set(mc9s, offset, val);
+}
+
+static int mc9s08dz60_direction_output(struct gpio_chip *gc,
+				       unsigned offset, int val)
+{
+	struct mc9s08dz60 *mc9s = gpiochip_get_data(gc);
+
+	return mc9s08dz60_set(mc9s, offset, val);
+}
+
+static int mc9s08dz60_probe(struct i2c_client *client,
+			    const struct i2c_device_id *id)
+{
+	struct mc9s08dz60 *mc9s;
+
+	mc9s = devm_kzalloc(&client->dev, sizeof(*mc9s), GFP_KERNEL);
+	if (!mc9s)
+		return -ENOMEM;
+
+	mc9s->chip.label = client->name;
+	mc9s->chip.base = -1;
+	mc9s->chip.parent = &client->dev;
+	mc9s->chip.owner = THIS_MODULE;
+	mc9s->chip.ngpio = GPIO_NUM;
+	mc9s->chip.can_sleep = true;
+	mc9s->chip.get = mc9s08dz60_get_value;
+	mc9s->chip.set = mc9s08dz60_set_value;
+	mc9s->chip.direction_output = mc9s08dz60_direction_output;
+	mc9s->client = client;
+	i2c_set_clientdata(client, mc9s);
+
+	return devm_gpiochip_add_data(&client->dev, &mc9s->chip, mc9s);
+}
+
+static const struct i2c_device_id mc9s08dz60_id[] = {
+	{"mc9s08dz60", 0},
+	{},
+};
+
+static struct i2c_driver mc9s08dz60_i2c_driver = {
+	.driver = {
+		.name = "mc9s08dz60",
+	},
+	.probe = mc9s08dz60_probe,
+	.id_table = mc9s08dz60_id,
+};
+builtin_i2c_driver(mc9s08dz60_i2c_driver);
diff --git a/drivers/gpio/gpio-menz127.c b/drivers/gpio/gpio-menz127.c
new file mode 100644
index 000000000..1e21c661d
--- /dev/null
+++ b/drivers/gpio/gpio-menz127.c
@@ -0,0 +1,214 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * MEN 16Z127 GPIO driver
+ *
+ * Copyright (C) 2016 MEN Mikroelektronik GmbH (www.men.de)
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/mcb.h>
+#include <linux/bitops.h>
+#include <linux/gpio/driver.h>
+
+#define MEN_Z127_CTRL	0x00
+#define MEN_Z127_PSR	0x04
+#define MEN_Z127_IRQR	0x08
+#define MEN_Z127_GPIODR	0x0c
+#define MEN_Z127_IER1	0x10
+#define MEN_Z127_IER2	0x14
+#define MEN_Z127_DBER	0x18
+#define MEN_Z127_ODER	0x1C
+#define GPIO_TO_DBCNT_REG(gpio)	((gpio * 4) + 0x80)
+
+#define MEN_Z127_DB_MIN_US	50
+/* 16 bit compare register. Each bit represents 50us */
+#define MEN_Z127_DB_MAX_US	(0xffff * MEN_Z127_DB_MIN_US)
+#define MEN_Z127_DB_IN_RANGE(db)	((db >= MEN_Z127_DB_MIN_US) && \
+					 (db <= MEN_Z127_DB_MAX_US))
+
+struct men_z127_gpio {
+	struct gpio_chip gc;
+	void __iomem *reg_base;
+	struct resource *mem;
+};
+
+static int men_z127_debounce(struct gpio_chip *gc, unsigned gpio,
+			     unsigned debounce)
+{
+	struct men_z127_gpio *priv = gpiochip_get_data(gc);
+	struct device *dev = gc->parent;
+	unsigned int rnd;
+	u32 db_en, db_cnt;
+
+	if (!MEN_Z127_DB_IN_RANGE(debounce)) {
+		dev_err(dev, "debounce value %u out of range", debounce);
+		return -EINVAL;
+	}
+
+	if (debounce > 0) {
+		/* round up or down depending on MSB-1 */
+		rnd = fls(debounce) - 1;
+
+		if (rnd && (debounce & BIT(rnd - 1)))
+			debounce = roundup(debounce, MEN_Z127_DB_MIN_US);
+		else
+			debounce = rounddown(debounce, MEN_Z127_DB_MIN_US);
+
+		if (debounce > MEN_Z127_DB_MAX_US)
+			debounce = MEN_Z127_DB_MAX_US;
+
+		/* 50us per register unit */
+		debounce /= 50;
+	}
+
+	spin_lock(&gc->bgpio_lock);
+
+	db_en = readl(priv->reg_base + MEN_Z127_DBER);
+
+	if (debounce == 0) {
+		db_en &= ~BIT(gpio);
+		db_cnt = 0;
+	} else {
+		db_en |= BIT(gpio);
+		db_cnt = debounce;
+	}
+
+	writel(db_en, priv->reg_base + MEN_Z127_DBER);
+	writel(db_cnt, priv->reg_base + GPIO_TO_DBCNT_REG(gpio));
+
+	spin_unlock(&gc->bgpio_lock);
+
+	return 0;
+}
+
+static int men_z127_set_single_ended(struct gpio_chip *gc,
+				     unsigned offset,
+				     enum pin_config_param param)
+{
+	struct men_z127_gpio *priv = gpiochip_get_data(gc);
+	u32 od_en;
+
+	spin_lock(&gc->bgpio_lock);
+	od_en = readl(priv->reg_base + MEN_Z127_ODER);
+
+	if (param == PIN_CONFIG_DRIVE_OPEN_DRAIN)
+		od_en |= BIT(offset);
+	else
+		/* Implicitly PIN_CONFIG_DRIVE_PUSH_PULL */
+		od_en &= ~BIT(offset);
+
+	writel(od_en, priv->reg_base + MEN_Z127_ODER);
+	spin_unlock(&gc->bgpio_lock);
+
+	return 0;
+}
+
+static int men_z127_set_config(struct gpio_chip *gc, unsigned offset,
+			       unsigned long config)
+{
+	enum pin_config_param param = pinconf_to_config_param(config);
+
+	switch (param) {
+	case PIN_CONFIG_DRIVE_OPEN_DRAIN:
+	case PIN_CONFIG_DRIVE_PUSH_PULL:
+		return men_z127_set_single_ended(gc, offset, param);
+
+	case PIN_CONFIG_INPUT_DEBOUNCE:
+		return men_z127_debounce(gc, offset,
+			pinconf_to_config_argument(config));
+
+	default:
+		break;
+	}
+
+	return -ENOTSUPP;
+}
+
+static int men_z127_probe(struct mcb_device *mdev,
+			  const struct mcb_device_id *id)
+{
+	struct men_z127_gpio *men_z127_gpio;
+	struct device *dev = &mdev->dev;
+	int ret;
+
+	men_z127_gpio = devm_kzalloc(dev, sizeof(struct men_z127_gpio),
+				     GFP_KERNEL);
+	if (!men_z127_gpio)
+		return -ENOMEM;
+
+	men_z127_gpio->mem = mcb_request_mem(mdev, dev_name(dev));
+	if (IS_ERR(men_z127_gpio->mem)) {
+		dev_err(dev, "failed to request device memory");
+		return PTR_ERR(men_z127_gpio->mem);
+	}
+
+	men_z127_gpio->reg_base = ioremap(men_z127_gpio->mem->start,
+					  resource_size(men_z127_gpio->mem));
+	if (men_z127_gpio->reg_base == NULL) {
+		ret = -ENXIO;
+		goto err_release;
+	}
+
+	mcb_set_drvdata(mdev, men_z127_gpio);
+
+	ret = bgpio_init(&men_z127_gpio->gc, &mdev->dev, 4,
+			 men_z127_gpio->reg_base + MEN_Z127_PSR,
+			 men_z127_gpio->reg_base + MEN_Z127_CTRL,
+			 NULL,
+			 men_z127_gpio->reg_base + MEN_Z127_GPIODR,
+			 NULL, 0);
+	if (ret)
+		goto err_unmap;
+
+	men_z127_gpio->gc.set_config = men_z127_set_config;
+
+	ret = gpiochip_add_data(&men_z127_gpio->gc, men_z127_gpio);
+	if (ret) {
+		dev_err(dev, "failed to register MEN 16Z127 GPIO controller");
+		goto err_unmap;
+	}
+
+	dev_info(dev, "MEN 16Z127 GPIO driver registered");
+
+	return 0;
+
+err_unmap:
+	iounmap(men_z127_gpio->reg_base);
+err_release:
+	mcb_release_mem(men_z127_gpio->mem);
+	return ret;
+}
+
+static void men_z127_remove(struct mcb_device *mdev)
+{
+	struct men_z127_gpio *men_z127_gpio = mcb_get_drvdata(mdev);
+
+	gpiochip_remove(&men_z127_gpio->gc);
+	iounmap(men_z127_gpio->reg_base);
+	mcb_release_mem(men_z127_gpio->mem);
+}
+
+static const struct mcb_device_id men_z127_ids[] = {
+	{ .device = 0x7f },
+	{ }
+};
+MODULE_DEVICE_TABLE(mcb, men_z127_ids);
+
+static struct mcb_driver men_z127_driver = {
+	.driver = {
+		.name = "z127-gpio",
+	},
+	.probe = men_z127_probe,
+	.remove = men_z127_remove,
+	.id_table = men_z127_ids,
+};
+module_mcb_driver(men_z127_driver);
+
+MODULE_AUTHOR("Andreas Werner <andreas.werner@men.de>");
+MODULE_DESCRIPTION("MEN 16z127 GPIO Controller");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("mcb:16z127");
+MODULE_IMPORT_NS(MCB);
diff --git a/drivers/gpio/gpio-merrifield.c b/drivers/gpio/gpio-merrifield.c
new file mode 100644
index 000000000..706687fab
--- /dev/null
+++ b/drivers/gpio/gpio-merrifield.c
@@ -0,0 +1,520 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Intel Merrifield SoC GPIO driver
+ *
+ * Copyright (c) 2016 Intel Corporation.
+ * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+ */
+
+#include <linux/acpi.h>
+#include <linux/bitops.h>
+#include <linux/gpio/driver.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/pinctrl/consumer.h>
+
+#define GCCR		0x000	/* controller configuration */
+#define GPLR		0x004	/* pin level r/o */
+#define GPDR		0x01c	/* pin direction */
+#define GPSR		0x034	/* pin set w/o */
+#define GPCR		0x04c	/* pin clear w/o */
+#define GRER		0x064	/* rising edge detect */
+#define GFER		0x07c	/* falling edge detect */
+#define GFBR		0x094	/* glitch filter bypass */
+#define GIMR		0x0ac	/* interrupt mask */
+#define GISR		0x0c4	/* interrupt source */
+#define GITR		0x300	/* input type */
+#define GLPR		0x318	/* level input polarity */
+#define GWMR		0x400	/* wake mask */
+#define GWSR		0x418	/* wake source */
+#define GSIR		0xc00	/* secure input */
+
+/* Intel Merrifield has 192 GPIO pins */
+#define MRFLD_NGPIO	192
+
+struct mrfld_gpio_pinrange {
+	unsigned int gpio_base;
+	unsigned int pin_base;
+	unsigned int npins;
+};
+
+#define GPIO_PINRANGE(gstart, gend, pstart)		\
+	{						\
+		.gpio_base = (gstart),			\
+		.pin_base = (pstart),			\
+		.npins = (gend) - (gstart) + 1,		\
+	}
+
+struct mrfld_gpio {
+	struct gpio_chip	chip;
+	void __iomem		*reg_base;
+	raw_spinlock_t		lock;
+	struct device		*dev;
+};
+
+static const struct mrfld_gpio_pinrange mrfld_gpio_ranges[] = {
+	GPIO_PINRANGE(0, 11, 146),
+	GPIO_PINRANGE(12, 13, 144),
+	GPIO_PINRANGE(14, 15, 35),
+	GPIO_PINRANGE(16, 16, 164),
+	GPIO_PINRANGE(17, 18, 105),
+	GPIO_PINRANGE(19, 22, 101),
+	GPIO_PINRANGE(23, 30, 107),
+	GPIO_PINRANGE(32, 43, 67),
+	GPIO_PINRANGE(44, 63, 195),
+	GPIO_PINRANGE(64, 67, 140),
+	GPIO_PINRANGE(68, 69, 165),
+	GPIO_PINRANGE(70, 71, 65),
+	GPIO_PINRANGE(72, 76, 228),
+	GPIO_PINRANGE(77, 86, 37),
+	GPIO_PINRANGE(87, 87, 48),
+	GPIO_PINRANGE(88, 88, 47),
+	GPIO_PINRANGE(89, 96, 49),
+	GPIO_PINRANGE(97, 97, 34),
+	GPIO_PINRANGE(102, 119, 83),
+	GPIO_PINRANGE(120, 123, 79),
+	GPIO_PINRANGE(124, 135, 115),
+	GPIO_PINRANGE(137, 142, 158),
+	GPIO_PINRANGE(154, 163, 24),
+	GPIO_PINRANGE(164, 176, 215),
+	GPIO_PINRANGE(177, 189, 127),
+	GPIO_PINRANGE(190, 191, 178),
+};
+
+static void __iomem *gpio_reg(struct gpio_chip *chip, unsigned int offset,
+			      unsigned int reg_type_offset)
+{
+	struct mrfld_gpio *priv = gpiochip_get_data(chip);
+	u8 reg = offset / 32;
+
+	return priv->reg_base + reg_type_offset + reg * 4;
+}
+
+static int mrfld_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+	void __iomem *gplr = gpio_reg(chip, offset, GPLR);
+
+	return !!(readl(gplr) & BIT(offset % 32));
+}
+
+static void mrfld_gpio_set(struct gpio_chip *chip, unsigned int offset,
+			   int value)
+{
+	struct mrfld_gpio *priv = gpiochip_get_data(chip);
+	void __iomem *gpsr, *gpcr;
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&priv->lock, flags);
+
+	if (value) {
+		gpsr = gpio_reg(chip, offset, GPSR);
+		writel(BIT(offset % 32), gpsr);
+	} else {
+		gpcr = gpio_reg(chip, offset, GPCR);
+		writel(BIT(offset % 32), gpcr);
+	}
+
+	raw_spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static int mrfld_gpio_direction_input(struct gpio_chip *chip,
+				      unsigned int offset)
+{
+	struct mrfld_gpio *priv = gpiochip_get_data(chip);
+	void __iomem *gpdr = gpio_reg(chip, offset, GPDR);
+	unsigned long flags;
+	u32 value;
+
+	raw_spin_lock_irqsave(&priv->lock, flags);
+
+	value = readl(gpdr);
+	value &= ~BIT(offset % 32);
+	writel(value, gpdr);
+
+	raw_spin_unlock_irqrestore(&priv->lock, flags);
+
+	return 0;
+}
+
+static int mrfld_gpio_direction_output(struct gpio_chip *chip,
+				       unsigned int offset, int value)
+{
+	struct mrfld_gpio *priv = gpiochip_get_data(chip);
+	void __iomem *gpdr = gpio_reg(chip, offset, GPDR);
+	unsigned long flags;
+
+	mrfld_gpio_set(chip, offset, value);
+
+	raw_spin_lock_irqsave(&priv->lock, flags);
+
+	value = readl(gpdr);
+	value |= BIT(offset % 32);
+	writel(value, gpdr);
+
+	raw_spin_unlock_irqrestore(&priv->lock, flags);
+
+	return 0;
+}
+
+static int mrfld_gpio_get_direction(struct gpio_chip *chip, unsigned int offset)
+{
+	void __iomem *gpdr = gpio_reg(chip, offset, GPDR);
+
+	if (readl(gpdr) & BIT(offset % 32))
+		return GPIO_LINE_DIRECTION_OUT;
+
+	return GPIO_LINE_DIRECTION_IN;
+}
+
+static int mrfld_gpio_set_debounce(struct gpio_chip *chip, unsigned int offset,
+				   unsigned int debounce)
+{
+	struct mrfld_gpio *priv = gpiochip_get_data(chip);
+	void __iomem *gfbr = gpio_reg(chip, offset, GFBR);
+	unsigned long flags;
+	u32 value;
+
+	raw_spin_lock_irqsave(&priv->lock, flags);
+
+	if (debounce)
+		value = readl(gfbr) & ~BIT(offset % 32);
+	else
+		value = readl(gfbr) | BIT(offset % 32);
+	writel(value, gfbr);
+
+	raw_spin_unlock_irqrestore(&priv->lock, flags);
+
+	return 0;
+}
+
+static int mrfld_gpio_set_config(struct gpio_chip *chip, unsigned int offset,
+				 unsigned long config)
+{
+	u32 debounce;
+
+	if (pinconf_to_config_param(config) != PIN_CONFIG_INPUT_DEBOUNCE)
+		return -ENOTSUPP;
+
+	debounce = pinconf_to_config_argument(config);
+	return mrfld_gpio_set_debounce(chip, offset, debounce);
+}
+
+static void mrfld_irq_ack(struct irq_data *d)
+{
+	struct mrfld_gpio *priv = irq_data_get_irq_chip_data(d);
+	u32 gpio = irqd_to_hwirq(d);
+	void __iomem *gisr = gpio_reg(&priv->chip, gpio, GISR);
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&priv->lock, flags);
+
+	writel(BIT(gpio % 32), gisr);
+
+	raw_spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static void mrfld_irq_unmask_mask(struct irq_data *d, bool unmask)
+{
+	struct mrfld_gpio *priv = irq_data_get_irq_chip_data(d);
+	u32 gpio = irqd_to_hwirq(d);
+	void __iomem *gimr = gpio_reg(&priv->chip, gpio, GIMR);
+	unsigned long flags;
+	u32 value;
+
+	raw_spin_lock_irqsave(&priv->lock, flags);
+
+	if (unmask)
+		value = readl(gimr) | BIT(gpio % 32);
+	else
+		value = readl(gimr) & ~BIT(gpio % 32);
+	writel(value, gimr);
+
+	raw_spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static void mrfld_irq_mask(struct irq_data *d)
+{
+	mrfld_irq_unmask_mask(d, false);
+}
+
+static void mrfld_irq_unmask(struct irq_data *d)
+{
+	mrfld_irq_unmask_mask(d, true);
+}
+
+static int mrfld_irq_set_type(struct irq_data *d, unsigned int type)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct mrfld_gpio *priv = gpiochip_get_data(gc);
+	u32 gpio = irqd_to_hwirq(d);
+	void __iomem *grer = gpio_reg(&priv->chip, gpio, GRER);
+	void __iomem *gfer = gpio_reg(&priv->chip, gpio, GFER);
+	void __iomem *gitr = gpio_reg(&priv->chip, gpio, GITR);
+	void __iomem *glpr = gpio_reg(&priv->chip, gpio, GLPR);
+	unsigned long flags;
+	u32 value;
+
+	raw_spin_lock_irqsave(&priv->lock, flags);
+
+	if (type & IRQ_TYPE_EDGE_RISING)
+		value = readl(grer) | BIT(gpio % 32);
+	else
+		value = readl(grer) & ~BIT(gpio % 32);
+	writel(value, grer);
+
+	if (type & IRQ_TYPE_EDGE_FALLING)
+		value = readl(gfer) | BIT(gpio % 32);
+	else
+		value = readl(gfer) & ~BIT(gpio % 32);
+	writel(value, gfer);
+
+	/*
+	 * To prevent glitches from triggering an unintended level interrupt,
+	 * configure GLPR register first and then configure GITR.
+	 */
+	if (type & IRQ_TYPE_LEVEL_LOW)
+		value = readl(glpr) | BIT(gpio % 32);
+	else
+		value = readl(glpr) & ~BIT(gpio % 32);
+	writel(value, glpr);
+
+	if (type & IRQ_TYPE_LEVEL_MASK) {
+		value = readl(gitr) | BIT(gpio % 32);
+		writel(value, gitr);
+
+		irq_set_handler_locked(d, handle_level_irq);
+	} else if (type & IRQ_TYPE_EDGE_BOTH) {
+		value = readl(gitr) & ~BIT(gpio % 32);
+		writel(value, gitr);
+
+		irq_set_handler_locked(d, handle_edge_irq);
+	}
+
+	raw_spin_unlock_irqrestore(&priv->lock, flags);
+
+	return 0;
+}
+
+static int mrfld_irq_set_wake(struct irq_data *d, unsigned int on)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct mrfld_gpio *priv = gpiochip_get_data(gc);
+	u32 gpio = irqd_to_hwirq(d);
+	void __iomem *gwmr = gpio_reg(&priv->chip, gpio, GWMR);
+	void __iomem *gwsr = gpio_reg(&priv->chip, gpio, GWSR);
+	unsigned long flags;
+	u32 value;
+
+	raw_spin_lock_irqsave(&priv->lock, flags);
+
+	/* Clear the existing wake status */
+	writel(BIT(gpio % 32), gwsr);
+
+	if (on)
+		value = readl(gwmr) | BIT(gpio % 32);
+	else
+		value = readl(gwmr) & ~BIT(gpio % 32);
+	writel(value, gwmr);
+
+	raw_spin_unlock_irqrestore(&priv->lock, flags);
+
+	dev_dbg(priv->dev, "%sable wake for gpio %u\n", on ? "en" : "dis", gpio);
+	return 0;
+}
+
+static struct irq_chip mrfld_irqchip = {
+	.name		= "gpio-merrifield",
+	.irq_ack	= mrfld_irq_ack,
+	.irq_mask	= mrfld_irq_mask,
+	.irq_unmask	= mrfld_irq_unmask,
+	.irq_set_type	= mrfld_irq_set_type,
+	.irq_set_wake	= mrfld_irq_set_wake,
+};
+
+static void mrfld_irq_handler(struct irq_desc *desc)
+{
+	struct gpio_chip *gc = irq_desc_get_handler_data(desc);
+	struct mrfld_gpio *priv = gpiochip_get_data(gc);
+	struct irq_chip *irqchip = irq_desc_get_chip(desc);
+	unsigned long base, gpio;
+
+	chained_irq_enter(irqchip, desc);
+
+	/* Check GPIO controller to check which pin triggered the interrupt */
+	for (base = 0; base < priv->chip.ngpio; base += 32) {
+		void __iomem *gisr = gpio_reg(&priv->chip, base, GISR);
+		void __iomem *gimr = gpio_reg(&priv->chip, base, GIMR);
+		unsigned long pending, enabled;
+
+		pending = readl(gisr);
+		enabled = readl(gimr);
+
+		/* Only interrupts that are enabled */
+		pending &= enabled;
+
+		for_each_set_bit(gpio, &pending, 32) {
+			unsigned int irq;
+
+			irq = irq_find_mapping(gc->irq.domain, base + gpio);
+			generic_handle_irq(irq);
+		}
+	}
+
+	chained_irq_exit(irqchip, desc);
+}
+
+static int mrfld_irq_init_hw(struct gpio_chip *chip)
+{
+	struct mrfld_gpio *priv = gpiochip_get_data(chip);
+	void __iomem *reg;
+	unsigned int base;
+
+	for (base = 0; base < priv->chip.ngpio; base += 32) {
+		/* Clear the rising-edge detect register */
+		reg = gpio_reg(&priv->chip, base, GRER);
+		writel(0, reg);
+		/* Clear the falling-edge detect register */
+		reg = gpio_reg(&priv->chip, base, GFER);
+		writel(0, reg);
+	}
+
+	return 0;
+}
+
+static const char *mrfld_gpio_get_pinctrl_dev_name(struct mrfld_gpio *priv)
+{
+	struct acpi_device *adev;
+	const char *name;
+
+	adev = acpi_dev_get_first_match_dev("INTC1002", NULL, -1);
+	if (adev) {
+		name = devm_kstrdup(priv->dev, acpi_dev_name(adev), GFP_KERNEL);
+		acpi_dev_put(adev);
+	} else {
+		name = "pinctrl-merrifield";
+	}
+
+	return name;
+}
+
+static int mrfld_gpio_add_pin_ranges(struct gpio_chip *chip)
+{
+	struct mrfld_gpio *priv = gpiochip_get_data(chip);
+	const struct mrfld_gpio_pinrange *range;
+	const char *pinctrl_dev_name;
+	unsigned int i;
+	int retval;
+
+	pinctrl_dev_name = mrfld_gpio_get_pinctrl_dev_name(priv);
+	for (i = 0; i < ARRAY_SIZE(mrfld_gpio_ranges); i++) {
+		range = &mrfld_gpio_ranges[i];
+		retval = gpiochip_add_pin_range(&priv->chip, pinctrl_dev_name,
+						range->gpio_base,
+						range->pin_base,
+						range->npins);
+		if (retval) {
+			dev_err(priv->dev, "failed to add GPIO pin range\n");
+			return retval;
+		}
+	}
+
+	return 0;
+}
+
+static int mrfld_gpio_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	struct gpio_irq_chip *girq;
+	struct mrfld_gpio *priv;
+	u32 gpio_base, irq_base;
+	void __iomem *base;
+	int retval;
+
+	retval = pcim_enable_device(pdev);
+	if (retval)
+		return retval;
+
+	retval = pcim_iomap_regions(pdev, BIT(1) | BIT(0), pci_name(pdev));
+	if (retval) {
+		dev_err(&pdev->dev, "I/O memory mapping error\n");
+		return retval;
+	}
+
+	base = pcim_iomap_table(pdev)[1];
+
+	irq_base = readl(base + 0 * sizeof(u32));
+	gpio_base = readl(base + 1 * sizeof(u32));
+
+	/* Release the IO mapping, since we already get the info from BAR1 */
+	pcim_iounmap_regions(pdev, BIT(1));
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dev = &pdev->dev;
+	priv->reg_base = pcim_iomap_table(pdev)[0];
+
+	priv->chip.label = dev_name(&pdev->dev);
+	priv->chip.parent = &pdev->dev;
+	priv->chip.request = gpiochip_generic_request;
+	priv->chip.free = gpiochip_generic_free;
+	priv->chip.direction_input = mrfld_gpio_direction_input;
+	priv->chip.direction_output = mrfld_gpio_direction_output;
+	priv->chip.get = mrfld_gpio_get;
+	priv->chip.set = mrfld_gpio_set;
+	priv->chip.get_direction = mrfld_gpio_get_direction;
+	priv->chip.set_config = mrfld_gpio_set_config;
+	priv->chip.base = gpio_base;
+	priv->chip.ngpio = MRFLD_NGPIO;
+	priv->chip.can_sleep = false;
+	priv->chip.add_pin_ranges = mrfld_gpio_add_pin_ranges;
+
+	raw_spin_lock_init(&priv->lock);
+
+	retval = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES);
+	if (retval < 0)
+		return retval;
+
+	girq = &priv->chip.irq;
+	girq->chip = &mrfld_irqchip;
+	girq->init_hw = mrfld_irq_init_hw;
+	girq->parent_handler = mrfld_irq_handler;
+	girq->num_parents = 1;
+	girq->parents = devm_kcalloc(&pdev->dev, girq->num_parents,
+				     sizeof(*girq->parents), GFP_KERNEL);
+	if (!girq->parents)
+		return -ENOMEM;
+	girq->parents[0] = pci_irq_vector(pdev, 0);
+	girq->first = irq_base;
+	girq->default_type = IRQ_TYPE_NONE;
+	girq->handler = handle_bad_irq;
+
+	retval = devm_gpiochip_add_data(&pdev->dev, &priv->chip, priv);
+	if (retval) {
+		dev_err(&pdev->dev, "gpiochip_add error %d\n", retval);
+		return retval;
+	}
+
+	pci_set_drvdata(pdev, priv);
+	return 0;
+}
+
+static const struct pci_device_id mrfld_gpio_ids[] = {
+	{ PCI_VDEVICE(INTEL, 0x1199) },
+	{ }
+};
+MODULE_DEVICE_TABLE(pci, mrfld_gpio_ids);
+
+static struct pci_driver mrfld_gpio_driver = {
+	.name		= "gpio-merrifield",
+	.id_table	= mrfld_gpio_ids,
+	.probe		= mrfld_gpio_probe,
+};
+
+module_pci_driver(mrfld_gpio_driver);
+
+MODULE_AUTHOR("Andy Shevchenko <andriy.shevchenko@linux.intel.com>");
+MODULE_DESCRIPTION("Intel Merrifield SoC GPIO driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-ml-ioh.c b/drivers/gpio/gpio-ml-ioh.c
new file mode 100644
index 000000000..53d4abefa
--- /dev/null
+++ b/drivers/gpio/gpio-ml-ioh.c
@@ -0,0 +1,597 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2010 OKI SEMICONDUCTOR Co., LTD.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/gpio/driver.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+
+#define IOH_EDGE_FALLING	0
+#define IOH_EDGE_RISING		BIT(0)
+#define IOH_LEVEL_L		BIT(1)
+#define IOH_LEVEL_H		(BIT(0) | BIT(1))
+#define IOH_EDGE_BOTH		BIT(2)
+#define IOH_IM_MASK		(BIT(0) | BIT(1) | BIT(2))
+
+#define IOH_IRQ_BASE		0
+
+struct ioh_reg_comn {
+	u32	ien;
+	u32	istatus;
+	u32	idisp;
+	u32	iclr;
+	u32	imask;
+	u32	imaskclr;
+	u32	po;
+	u32	pi;
+	u32	pm;
+	u32	im_0;
+	u32	im_1;
+	u32	reserved;
+};
+
+struct ioh_regs {
+	struct ioh_reg_comn regs[8];
+	u32 reserve1[16];
+	u32 ioh_sel_reg[4];
+	u32 reserve2[11];
+	u32 srst;
+};
+
+/**
+ * struct ioh_gpio_reg_data - The register store data.
+ * @ien_reg:	To store contents of interrupt enable register.
+ * @imask_reg:	To store contents of interrupt mask regist
+ * @po_reg:	To store contents of PO register.
+ * @pm_reg:	To store contents of PM register.
+ * @im0_reg:	To store contents of interrupt mode regist0
+ * @im1_reg:	To store contents of interrupt mode regist1
+ * @use_sel_reg: To store contents of GPIO_USE_SEL0~3
+ */
+struct ioh_gpio_reg_data {
+	u32 ien_reg;
+	u32 imask_reg;
+	u32 po_reg;
+	u32 pm_reg;
+	u32 im0_reg;
+	u32 im1_reg;
+	u32 use_sel_reg;
+};
+
+/**
+ * struct ioh_gpio - GPIO private data structure.
+ * @base:			PCI base address of Memory mapped I/O register.
+ * @reg:			Memory mapped IOH GPIO register list.
+ * @dev:			Pointer to device structure.
+ * @gpio:			Data for GPIO infrastructure.
+ * @ioh_gpio_reg:		Memory mapped Register data is saved here
+ *				when suspend.
+ * @gpio_use_sel:		Save GPIO_USE_SEL1~4 register for PM
+ * @ch:				Indicate GPIO channel
+ * @irq_base:		Save base of IRQ number for interrupt
+ * @spinlock:		Used for register access protection
+ */
+struct ioh_gpio {
+	void __iomem *base;
+	struct ioh_regs __iomem *reg;
+	struct device *dev;
+	struct gpio_chip gpio;
+	struct ioh_gpio_reg_data ioh_gpio_reg;
+	u32 gpio_use_sel;
+	int ch;
+	int irq_base;
+	spinlock_t spinlock;
+};
+
+static const int num_ports[] = {6, 12, 16, 16, 15, 16, 16, 12};
+
+static void ioh_gpio_set(struct gpio_chip *gpio, unsigned nr, int val)
+{
+	u32 reg_val;
+	struct ioh_gpio *chip =	gpiochip_get_data(gpio);
+	unsigned long flags;
+
+	spin_lock_irqsave(&chip->spinlock, flags);
+	reg_val = ioread32(&chip->reg->regs[chip->ch].po);
+	if (val)
+		reg_val |= (1 << nr);
+	else
+		reg_val &= ~(1 << nr);
+
+	iowrite32(reg_val, &chip->reg->regs[chip->ch].po);
+	spin_unlock_irqrestore(&chip->spinlock, flags);
+}
+
+static int ioh_gpio_get(struct gpio_chip *gpio, unsigned nr)
+{
+	struct ioh_gpio *chip =	gpiochip_get_data(gpio);
+
+	return !!(ioread32(&chip->reg->regs[chip->ch].pi) & (1 << nr));
+}
+
+static int ioh_gpio_direction_output(struct gpio_chip *gpio, unsigned nr,
+				     int val)
+{
+	struct ioh_gpio *chip =	gpiochip_get_data(gpio);
+	u32 pm;
+	u32 reg_val;
+	unsigned long flags;
+
+	spin_lock_irqsave(&chip->spinlock, flags);
+	pm = ioread32(&chip->reg->regs[chip->ch].pm) &
+					((1 << num_ports[chip->ch]) - 1);
+	pm |= (1 << nr);
+	iowrite32(pm, &chip->reg->regs[chip->ch].pm);
+
+	reg_val = ioread32(&chip->reg->regs[chip->ch].po);
+	if (val)
+		reg_val |= (1 << nr);
+	else
+		reg_val &= ~(1 << nr);
+	iowrite32(reg_val, &chip->reg->regs[chip->ch].po);
+
+	spin_unlock_irqrestore(&chip->spinlock, flags);
+
+	return 0;
+}
+
+static int ioh_gpio_direction_input(struct gpio_chip *gpio, unsigned nr)
+{
+	struct ioh_gpio *chip =	gpiochip_get_data(gpio);
+	u32 pm;
+	unsigned long flags;
+
+	spin_lock_irqsave(&chip->spinlock, flags);
+	pm = ioread32(&chip->reg->regs[chip->ch].pm) &
+				((1 << num_ports[chip->ch]) - 1);
+	pm &= ~(1 << nr);
+	iowrite32(pm, &chip->reg->regs[chip->ch].pm);
+	spin_unlock_irqrestore(&chip->spinlock, flags);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+/*
+ * Save register configuration and disable interrupts.
+ */
+static void ioh_gpio_save_reg_conf(struct ioh_gpio *chip)
+{
+	int i;
+
+	for (i = 0; i < 8; i ++, chip++) {
+		chip->ioh_gpio_reg.po_reg =
+					ioread32(&chip->reg->regs[chip->ch].po);
+		chip->ioh_gpio_reg.pm_reg =
+					ioread32(&chip->reg->regs[chip->ch].pm);
+		chip->ioh_gpio_reg.ien_reg =
+				       ioread32(&chip->reg->regs[chip->ch].ien);
+		chip->ioh_gpio_reg.imask_reg =
+				     ioread32(&chip->reg->regs[chip->ch].imask);
+		chip->ioh_gpio_reg.im0_reg =
+				      ioread32(&chip->reg->regs[chip->ch].im_0);
+		chip->ioh_gpio_reg.im1_reg =
+				      ioread32(&chip->reg->regs[chip->ch].im_1);
+		if (i < 4)
+			chip->ioh_gpio_reg.use_sel_reg =
+					   ioread32(&chip->reg->ioh_sel_reg[i]);
+	}
+}
+
+/*
+ * This function restores the register configuration of the GPIO device.
+ */
+static void ioh_gpio_restore_reg_conf(struct ioh_gpio *chip)
+{
+	int i;
+
+	for (i = 0; i < 8; i ++, chip++) {
+		iowrite32(chip->ioh_gpio_reg.po_reg,
+			  &chip->reg->regs[chip->ch].po);
+		iowrite32(chip->ioh_gpio_reg.pm_reg,
+			  &chip->reg->regs[chip->ch].pm);
+		iowrite32(chip->ioh_gpio_reg.ien_reg,
+			  &chip->reg->regs[chip->ch].ien);
+		iowrite32(chip->ioh_gpio_reg.imask_reg,
+			  &chip->reg->regs[chip->ch].imask);
+		iowrite32(chip->ioh_gpio_reg.im0_reg,
+			  &chip->reg->regs[chip->ch].im_0);
+		iowrite32(chip->ioh_gpio_reg.im1_reg,
+			  &chip->reg->regs[chip->ch].im_1);
+		if (i < 4)
+			iowrite32(chip->ioh_gpio_reg.use_sel_reg,
+				  &chip->reg->ioh_sel_reg[i]);
+	}
+}
+#endif
+
+static int ioh_gpio_to_irq(struct gpio_chip *gpio, unsigned offset)
+{
+	struct ioh_gpio *chip = gpiochip_get_data(gpio);
+	return chip->irq_base + offset;
+}
+
+static void ioh_gpio_setup(struct ioh_gpio *chip, int num_port)
+{
+	struct gpio_chip *gpio = &chip->gpio;
+
+	gpio->label = dev_name(chip->dev);
+	gpio->owner = THIS_MODULE;
+	gpio->direction_input = ioh_gpio_direction_input;
+	gpio->get = ioh_gpio_get;
+	gpio->direction_output = ioh_gpio_direction_output;
+	gpio->set = ioh_gpio_set;
+	gpio->dbg_show = NULL;
+	gpio->base = -1;
+	gpio->ngpio = num_port;
+	gpio->can_sleep = false;
+	gpio->to_irq = ioh_gpio_to_irq;
+}
+
+static int ioh_irq_type(struct irq_data *d, unsigned int type)
+{
+	u32 im;
+	void __iomem *im_reg;
+	u32 ien;
+	u32 im_pos;
+	int ch;
+	unsigned long flags;
+	u32 val;
+	int irq = d->irq;
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	struct ioh_gpio *chip = gc->private;
+
+	ch = irq - chip->irq_base;
+	if (irq <= chip->irq_base + 7) {
+		im_reg = &chip->reg->regs[chip->ch].im_0;
+		im_pos = ch;
+	} else {
+		im_reg = &chip->reg->regs[chip->ch].im_1;
+		im_pos = ch - 8;
+	}
+	dev_dbg(chip->dev, "%s:irq=%d type=%d ch=%d pos=%d type=%d\n",
+		__func__, irq, type, ch, im_pos, type);
+
+	spin_lock_irqsave(&chip->spinlock, flags);
+
+	switch (type) {
+	case IRQ_TYPE_EDGE_RISING:
+		val = IOH_EDGE_RISING;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		val = IOH_EDGE_FALLING;
+		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		val = IOH_EDGE_BOTH;
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		val = IOH_LEVEL_H;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		val = IOH_LEVEL_L;
+		break;
+	case IRQ_TYPE_PROBE:
+		goto end;
+	default:
+		dev_warn(chip->dev, "%s: unknown type(%dd)",
+			__func__, type);
+		goto end;
+	}
+
+	/* Set interrupt mode */
+	im = ioread32(im_reg) & ~(IOH_IM_MASK << (im_pos * 4));
+	iowrite32(im | (val << (im_pos * 4)), im_reg);
+
+	/* iclr */
+	iowrite32(BIT(ch), &chip->reg->regs[chip->ch].iclr);
+
+	/* IMASKCLR */
+	iowrite32(BIT(ch), &chip->reg->regs[chip->ch].imaskclr);
+
+	/* Enable interrupt */
+	ien = ioread32(&chip->reg->regs[chip->ch].ien);
+	iowrite32(ien | BIT(ch), &chip->reg->regs[chip->ch].ien);
+end:
+	spin_unlock_irqrestore(&chip->spinlock, flags);
+
+	return 0;
+}
+
+static void ioh_irq_unmask(struct irq_data *d)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	struct ioh_gpio *chip = gc->private;
+
+	iowrite32(1 << (d->irq - chip->irq_base),
+		  &chip->reg->regs[chip->ch].imaskclr);
+}
+
+static void ioh_irq_mask(struct irq_data *d)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	struct ioh_gpio *chip = gc->private;
+
+	iowrite32(1 << (d->irq - chip->irq_base),
+		  &chip->reg->regs[chip->ch].imask);
+}
+
+static void ioh_irq_disable(struct irq_data *d)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	struct ioh_gpio *chip = gc->private;
+	unsigned long flags;
+	u32 ien;
+
+	spin_lock_irqsave(&chip->spinlock, flags);
+	ien = ioread32(&chip->reg->regs[chip->ch].ien);
+	ien &= ~(1 << (d->irq - chip->irq_base));
+	iowrite32(ien, &chip->reg->regs[chip->ch].ien);
+	spin_unlock_irqrestore(&chip->spinlock, flags);
+}
+
+static void ioh_irq_enable(struct irq_data *d)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	struct ioh_gpio *chip = gc->private;
+	unsigned long flags;
+	u32 ien;
+
+	spin_lock_irqsave(&chip->spinlock, flags);
+	ien = ioread32(&chip->reg->regs[chip->ch].ien);
+	ien |= 1 << (d->irq - chip->irq_base);
+	iowrite32(ien, &chip->reg->regs[chip->ch].ien);
+	spin_unlock_irqrestore(&chip->spinlock, flags);
+}
+
+static irqreturn_t ioh_gpio_handler(int irq, void *dev_id)
+{
+	struct ioh_gpio *chip = dev_id;
+	u32 reg_val;
+	int i, j;
+	int ret = IRQ_NONE;
+
+	for (i = 0; i < 8; i++, chip++) {
+		reg_val = ioread32(&chip->reg->regs[i].istatus);
+		for (j = 0; j < num_ports[i]; j++) {
+			if (reg_val & BIT(j)) {
+				dev_dbg(chip->dev,
+					"%s:[%d]:irq=%d status=0x%x\n",
+					__func__, j, irq, reg_val);
+				iowrite32(BIT(j),
+					  &chip->reg->regs[chip->ch].iclr);
+				generic_handle_irq(chip->irq_base + j);
+				ret = IRQ_HANDLED;
+			}
+		}
+	}
+	return ret;
+}
+
+static int ioh_gpio_alloc_generic_chip(struct ioh_gpio *chip,
+				       unsigned int irq_start,
+				       unsigned int num)
+{
+	struct irq_chip_generic *gc;
+	struct irq_chip_type *ct;
+	int rv;
+
+	gc = devm_irq_alloc_generic_chip(chip->dev, "ioh_gpio", 1, irq_start,
+					 chip->base, handle_simple_irq);
+	if (!gc)
+		return -ENOMEM;
+
+	gc->private = chip;
+	ct = gc->chip_types;
+
+	ct->chip.irq_mask = ioh_irq_mask;
+	ct->chip.irq_unmask = ioh_irq_unmask;
+	ct->chip.irq_set_type = ioh_irq_type;
+	ct->chip.irq_disable = ioh_irq_disable;
+	ct->chip.irq_enable = ioh_irq_enable;
+
+	rv = devm_irq_setup_generic_chip(chip->dev, gc, IRQ_MSK(num),
+					 IRQ_GC_INIT_MASK_CACHE,
+					 IRQ_NOREQUEST | IRQ_NOPROBE, 0);
+
+	return rv;
+}
+
+static int ioh_gpio_probe(struct pci_dev *pdev,
+				    const struct pci_device_id *id)
+{
+	int ret;
+	int i, j;
+	struct ioh_gpio *chip;
+	void __iomem *base;
+	void *chip_save;
+	int irq_base;
+
+	ret = pci_enable_device(pdev);
+	if (ret) {
+		dev_err(&pdev->dev, "%s : pci_enable_device failed", __func__);
+		goto err_pci_enable;
+	}
+
+	ret = pci_request_regions(pdev, KBUILD_MODNAME);
+	if (ret) {
+		dev_err(&pdev->dev, "pci_request_regions failed-%d", ret);
+		goto err_request_regions;
+	}
+
+	base = pci_iomap(pdev, 1, 0);
+	if (!base) {
+		dev_err(&pdev->dev, "%s : pci_iomap failed", __func__);
+		ret = -ENOMEM;
+		goto err_iomap;
+	}
+
+	chip_save = kcalloc(8, sizeof(*chip), GFP_KERNEL);
+	if (chip_save == NULL) {
+		ret = -ENOMEM;
+		goto err_kzalloc;
+	}
+
+	chip = chip_save;
+	for (i = 0; i < 8; i++, chip++) {
+		chip->dev = &pdev->dev;
+		chip->base = base;
+		chip->reg = chip->base;
+		chip->ch = i;
+		spin_lock_init(&chip->spinlock);
+		ioh_gpio_setup(chip, num_ports[i]);
+		ret = gpiochip_add_data(&chip->gpio, chip);
+		if (ret) {
+			dev_err(&pdev->dev, "IOH gpio: Failed to register GPIO\n");
+			goto err_gpiochip_add;
+		}
+	}
+
+	chip = chip_save;
+	for (j = 0; j < 8; j++, chip++) {
+		irq_base = devm_irq_alloc_descs(&pdev->dev, -1, IOH_IRQ_BASE,
+						num_ports[j], NUMA_NO_NODE);
+		if (irq_base < 0) {
+			dev_warn(&pdev->dev,
+				"ml_ioh_gpio: Failed to get IRQ base num\n");
+			ret = irq_base;
+			goto err_gpiochip_add;
+		}
+		chip->irq_base = irq_base;
+
+		ret = ioh_gpio_alloc_generic_chip(chip,
+						  irq_base, num_ports[j]);
+		if (ret)
+			goto err_gpiochip_add;
+	}
+
+	chip = chip_save;
+	ret = devm_request_irq(&pdev->dev, pdev->irq, ioh_gpio_handler,
+			       IRQF_SHARED, KBUILD_MODNAME, chip);
+	if (ret != 0) {
+		dev_err(&pdev->dev,
+			"%s request_irq failed\n", __func__);
+		goto err_gpiochip_add;
+	}
+
+	pci_set_drvdata(pdev, chip);
+
+	return 0;
+
+err_gpiochip_add:
+	chip = chip_save;
+	while (--i >= 0) {
+		gpiochip_remove(&chip->gpio);
+		chip++;
+	}
+	kfree(chip_save);
+
+err_kzalloc:
+	pci_iounmap(pdev, base);
+
+err_iomap:
+	pci_release_regions(pdev);
+
+err_request_regions:
+	pci_disable_device(pdev);
+
+err_pci_enable:
+
+	dev_err(&pdev->dev, "%s Failed returns %d\n", __func__, ret);
+	return ret;
+}
+
+static void ioh_gpio_remove(struct pci_dev *pdev)
+{
+	int i;
+	struct ioh_gpio *chip = pci_get_drvdata(pdev);
+	void *chip_save;
+
+	chip_save = chip;
+
+	for (i = 0; i < 8; i++, chip++)
+		gpiochip_remove(&chip->gpio);
+
+	chip = chip_save;
+	pci_iounmap(pdev, chip->base);
+	pci_release_regions(pdev);
+	pci_disable_device(pdev);
+	kfree(chip);
+}
+
+#ifdef CONFIG_PM
+static int ioh_gpio_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	s32 ret;
+	struct ioh_gpio *chip = pci_get_drvdata(pdev);
+	unsigned long flags;
+
+	spin_lock_irqsave(&chip->spinlock, flags);
+	ioh_gpio_save_reg_conf(chip);
+	spin_unlock_irqrestore(&chip->spinlock, flags);
+
+	ret = pci_save_state(pdev);
+	if (ret) {
+		dev_err(&pdev->dev, "pci_save_state Failed-%d\n", ret);
+		return ret;
+	}
+	pci_disable_device(pdev);
+	pci_set_power_state(pdev, PCI_D0);
+	ret = pci_enable_wake(pdev, PCI_D0, 1);
+	if (ret)
+		dev_err(&pdev->dev, "pci_enable_wake Failed -%d\n", ret);
+
+	return 0;
+}
+
+static int ioh_gpio_resume(struct pci_dev *pdev)
+{
+	s32 ret;
+	struct ioh_gpio *chip = pci_get_drvdata(pdev);
+	unsigned long flags;
+
+	ret = pci_enable_wake(pdev, PCI_D0, 0);
+
+	pci_set_power_state(pdev, PCI_D0);
+	ret = pci_enable_device(pdev);
+	if (ret) {
+		dev_err(&pdev->dev, "pci_enable_device Failed-%d ", ret);
+		return ret;
+	}
+	pci_restore_state(pdev);
+
+	spin_lock_irqsave(&chip->spinlock, flags);
+	iowrite32(0x01, &chip->reg->srst);
+	iowrite32(0x00, &chip->reg->srst);
+	ioh_gpio_restore_reg_conf(chip);
+	spin_unlock_irqrestore(&chip->spinlock, flags);
+
+	return 0;
+}
+#else
+#define ioh_gpio_suspend NULL
+#define ioh_gpio_resume NULL
+#endif
+
+static const struct pci_device_id ioh_gpio_pcidev_id[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x802E) },
+	{ 0, }
+};
+MODULE_DEVICE_TABLE(pci, ioh_gpio_pcidev_id);
+
+static struct pci_driver ioh_gpio_driver = {
+	.name = "ml_ioh_gpio",
+	.id_table = ioh_gpio_pcidev_id,
+	.probe = ioh_gpio_probe,
+	.remove = ioh_gpio_remove,
+	.suspend = ioh_gpio_suspend,
+	.resume = ioh_gpio_resume
+};
+
+module_pci_driver(ioh_gpio_driver);
+
+MODULE_DESCRIPTION("OKI SEMICONDUCTOR ML-IOH series GPIO Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/gpio-mlxbf.c b/drivers/gpio/gpio-mlxbf.c
new file mode 100644
index 000000000..1fa9973f5
--- /dev/null
+++ b/drivers/gpio/gpio-mlxbf.c
@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/acpi.h>
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/gpio/driver.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/resource.h>
+#include <linux/types.h>
+
+/* Number of pins on BlueField */
+#define MLXBF_GPIO_NR 54
+
+/* Pad Electrical Controls. */
+#define MLXBF_GPIO_PAD_CONTROL_FIRST_WORD 0x0700
+#define MLXBF_GPIO_PAD_CONTROL_1_FIRST_WORD 0x0708
+#define MLXBF_GPIO_PAD_CONTROL_2_FIRST_WORD 0x0710
+#define MLXBF_GPIO_PAD_CONTROL_3_FIRST_WORD 0x0718
+
+#define MLXBF_GPIO_PIN_DIR_I 0x1040
+#define MLXBF_GPIO_PIN_DIR_O 0x1048
+#define MLXBF_GPIO_PIN_STATE 0x1000
+#define MLXBF_GPIO_SCRATCHPAD 0x20
+
+#ifdef CONFIG_PM
+struct mlxbf_gpio_context_save_regs {
+	u64 scratchpad;
+	u64 pad_control[MLXBF_GPIO_NR];
+	u64 pin_dir_i;
+	u64 pin_dir_o;
+};
+#endif
+
+/* Device state structure. */
+struct mlxbf_gpio_state {
+	struct gpio_chip gc;
+
+	/* Memory Address */
+	void __iomem *base;
+
+#ifdef CONFIG_PM
+	struct mlxbf_gpio_context_save_regs csave_regs;
+#endif
+};
+
+static int mlxbf_gpio_probe(struct platform_device *pdev)
+{
+	struct mlxbf_gpio_state *gs;
+	struct device *dev = &pdev->dev;
+	struct gpio_chip *gc;
+	int ret;
+
+	gs = devm_kzalloc(&pdev->dev, sizeof(*gs), GFP_KERNEL);
+	if (!gs)
+		return -ENOMEM;
+
+	gs->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(gs->base))
+		return PTR_ERR(gs->base);
+
+	gc = &gs->gc;
+	ret = bgpio_init(gc, dev, 8,
+			 gs->base + MLXBF_GPIO_PIN_STATE,
+			 NULL,
+			 NULL,
+			 gs->base + MLXBF_GPIO_PIN_DIR_O,
+			 gs->base + MLXBF_GPIO_PIN_DIR_I,
+			 0);
+	if (ret)
+		return -ENODEV;
+
+	gc->owner = THIS_MODULE;
+	gc->ngpio = MLXBF_GPIO_NR;
+
+	ret = devm_gpiochip_add_data(dev, &gs->gc, gs);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed adding memory mapped gpiochip\n");
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, gs);
+	dev_info(&pdev->dev, "registered Mellanox BlueField GPIO");
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int mlxbf_gpio_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct mlxbf_gpio_state *gs = platform_get_drvdata(pdev);
+
+	gs->csave_regs.scratchpad = readq(gs->base + MLXBF_GPIO_SCRATCHPAD);
+	gs->csave_regs.pad_control[0] =
+		readq(gs->base + MLXBF_GPIO_PAD_CONTROL_FIRST_WORD);
+	gs->csave_regs.pad_control[1] =
+		readq(gs->base + MLXBF_GPIO_PAD_CONTROL_1_FIRST_WORD);
+	gs->csave_regs.pad_control[2] =
+		readq(gs->base + MLXBF_GPIO_PAD_CONTROL_2_FIRST_WORD);
+	gs->csave_regs.pad_control[3] =
+		readq(gs->base + MLXBF_GPIO_PAD_CONTROL_3_FIRST_WORD);
+	gs->csave_regs.pin_dir_i = readq(gs->base + MLXBF_GPIO_PIN_DIR_I);
+	gs->csave_regs.pin_dir_o = readq(gs->base + MLXBF_GPIO_PIN_DIR_O);
+
+	return 0;
+}
+
+static int mlxbf_gpio_resume(struct platform_device *pdev)
+{
+	struct mlxbf_gpio_state *gs = platform_get_drvdata(pdev);
+
+	writeq(gs->csave_regs.scratchpad, gs->base + MLXBF_GPIO_SCRATCHPAD);
+	writeq(gs->csave_regs.pad_control[0],
+	       gs->base + MLXBF_GPIO_PAD_CONTROL_FIRST_WORD);
+	writeq(gs->csave_regs.pad_control[1],
+	       gs->base + MLXBF_GPIO_PAD_CONTROL_1_FIRST_WORD);
+	writeq(gs->csave_regs.pad_control[2],
+	       gs->base + MLXBF_GPIO_PAD_CONTROL_2_FIRST_WORD);
+	writeq(gs->csave_regs.pad_control[3],
+	       gs->base + MLXBF_GPIO_PAD_CONTROL_3_FIRST_WORD);
+	writeq(gs->csave_regs.pin_dir_i, gs->base + MLXBF_GPIO_PIN_DIR_I);
+	writeq(gs->csave_regs.pin_dir_o, gs->base + MLXBF_GPIO_PIN_DIR_O);
+
+	return 0;
+}
+#endif
+
+static const struct acpi_device_id __maybe_unused mlxbf_gpio_acpi_match[] = {
+	{ "MLNXBF02", 0 },
+	{}
+};
+MODULE_DEVICE_TABLE(acpi, mlxbf_gpio_acpi_match);
+
+static struct platform_driver mlxbf_gpio_driver = {
+	.driver = {
+		.name = "mlxbf_gpio",
+		.acpi_match_table = ACPI_PTR(mlxbf_gpio_acpi_match),
+	},
+	.probe    = mlxbf_gpio_probe,
+#ifdef CONFIG_PM
+	.suspend  = mlxbf_gpio_suspend,
+	.resume   = mlxbf_gpio_resume,
+#endif
+};
+
+module_platform_driver(mlxbf_gpio_driver);
+
+MODULE_DESCRIPTION("Mellanox BlueField GPIO Driver");
+MODULE_AUTHOR("Mellanox Technologies");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/gpio-mlxbf2.c b/drivers/gpio/gpio-mlxbf2.c
new file mode 100644
index 000000000..d4b250b47
--- /dev/null
+++ b/drivers/gpio/gpio-mlxbf2.c
@@ -0,0 +1,341 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/acpi.h>
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/gpio/driver.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/resource.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+/*
+ * There are 3 YU GPIO blocks:
+ * gpio[0]: HOST_GPIO0->HOST_GPIO31
+ * gpio[1]: HOST_GPIO32->HOST_GPIO63
+ * gpio[2]: HOST_GPIO64->HOST_GPIO69
+ */
+#define MLXBF2_GPIO_MAX_PINS_PER_BLOCK 32
+
+/*
+ * arm_gpio_lock register:
+ * bit[31]	lock status: active if set
+ * bit[15:0]	set lock
+ * The lock is enabled only if 0xd42f is written to this field
+ */
+#define YU_ARM_GPIO_LOCK_ADDR		0x2801088
+#define YU_ARM_GPIO_LOCK_SIZE		0x8
+#define YU_LOCK_ACTIVE_BIT(val)		(val >> 31)
+#define YU_ARM_GPIO_LOCK_ACQUIRE	0xd42f
+#define YU_ARM_GPIO_LOCK_RELEASE	0x0
+
+/*
+ * gpio[x] block registers and their offset
+ */
+#define YU_GPIO_DATAIN			0x04
+#define YU_GPIO_MODE1			0x08
+#define YU_GPIO_MODE0			0x0c
+#define YU_GPIO_DATASET			0x14
+#define YU_GPIO_DATACLEAR		0x18
+#define YU_GPIO_MODE1_CLEAR		0x50
+#define YU_GPIO_MODE0_SET		0x54
+#define YU_GPIO_MODE0_CLEAR		0x58
+
+#ifdef CONFIG_PM
+struct mlxbf2_gpio_context_save_regs {
+	u32 gpio_mode0;
+	u32 gpio_mode1;
+};
+#endif
+
+/* BlueField-2 gpio block context structure. */
+struct mlxbf2_gpio_context {
+	struct gpio_chip gc;
+
+	/* YU GPIO blocks address */
+	void __iomem *gpio_io;
+
+#ifdef CONFIG_PM
+	struct mlxbf2_gpio_context_save_regs *csave_regs;
+#endif
+};
+
+/* BlueField-2 gpio shared structure. */
+struct mlxbf2_gpio_param {
+	void __iomem *io;
+	struct resource *res;
+	struct mutex *lock;
+};
+
+static struct resource yu_arm_gpio_lock_res = {
+	.start = YU_ARM_GPIO_LOCK_ADDR,
+	.end   = YU_ARM_GPIO_LOCK_ADDR + YU_ARM_GPIO_LOCK_SIZE - 1,
+	.name  = "YU_ARM_GPIO_LOCK",
+};
+
+static DEFINE_MUTEX(yu_arm_gpio_lock_mutex);
+
+static struct mlxbf2_gpio_param yu_arm_gpio_lock_param = {
+	.res = &yu_arm_gpio_lock_res,
+	.lock = &yu_arm_gpio_lock_mutex,
+};
+
+/* Request memory region and map yu_arm_gpio_lock resource */
+static int mlxbf2_gpio_get_lock_res(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	resource_size_t size;
+	int ret = 0;
+
+	mutex_lock(yu_arm_gpio_lock_param.lock);
+
+	/* Check if the memory map already exists */
+	if (yu_arm_gpio_lock_param.io)
+		goto exit;
+
+	res = yu_arm_gpio_lock_param.res;
+	size = resource_size(res);
+
+	if (!devm_request_mem_region(dev, res->start, size, res->name)) {
+		ret = -EFAULT;
+		goto exit;
+	}
+
+	yu_arm_gpio_lock_param.io = devm_ioremap(dev, res->start, size);
+	if (!yu_arm_gpio_lock_param.io)
+		ret = -ENOMEM;
+
+exit:
+	mutex_unlock(yu_arm_gpio_lock_param.lock);
+
+	return ret;
+}
+
+/*
+ * Acquire the YU arm_gpio_lock to be able to change the direction
+ * mode. If the lock_active bit is already set, return an error.
+ */
+static int mlxbf2_gpio_lock_acquire(struct mlxbf2_gpio_context *gs)
+{
+	u32 arm_gpio_lock_val;
+
+	mutex_lock(yu_arm_gpio_lock_param.lock);
+	spin_lock(&gs->gc.bgpio_lock);
+
+	arm_gpio_lock_val = readl(yu_arm_gpio_lock_param.io);
+
+	/*
+	 * When lock active bit[31] is set, ModeX is write enabled
+	 */
+	if (YU_LOCK_ACTIVE_BIT(arm_gpio_lock_val)) {
+		spin_unlock(&gs->gc.bgpio_lock);
+		mutex_unlock(yu_arm_gpio_lock_param.lock);
+		return -EINVAL;
+	}
+
+	writel(YU_ARM_GPIO_LOCK_ACQUIRE, yu_arm_gpio_lock_param.io);
+
+	return 0;
+}
+
+/*
+ * Release the YU arm_gpio_lock after changing the direction mode.
+ */
+static void mlxbf2_gpio_lock_release(struct mlxbf2_gpio_context *gs)
+	__releases(&gs->gc.bgpio_lock)
+	__releases(yu_arm_gpio_lock_param.lock)
+{
+	writel(YU_ARM_GPIO_LOCK_RELEASE, yu_arm_gpio_lock_param.io);
+	spin_unlock(&gs->gc.bgpio_lock);
+	mutex_unlock(yu_arm_gpio_lock_param.lock);
+}
+
+/*
+ * mode0 and mode1 are both locked by the gpio_lock field.
+ *
+ * Together, mode0 and mode1 define the gpio Mode dependeing also
+ * on Reg_DataOut.
+ *
+ * {mode1,mode0}:{Reg_DataOut=0,Reg_DataOut=1}->{DataOut=0,DataOut=1}
+ *
+ * {0,0}:Reg_DataOut{0,1}->{Z,Z} Input PAD
+ * {0,1}:Reg_DataOut{0,1}->{0,1} Full drive Output PAD
+ * {1,0}:Reg_DataOut{0,1}->{0,Z} 0-set PAD to low, 1-float
+ * {1,1}:Reg_DataOut{0,1}->{Z,1} 0-float, 1-set PAD to high
+ */
+
+/*
+ * Set input direction:
+ * {mode1,mode0} = {0,0}
+ */
+static int mlxbf2_gpio_direction_input(struct gpio_chip *chip,
+				       unsigned int offset)
+{
+	struct mlxbf2_gpio_context *gs = gpiochip_get_data(chip);
+	int ret;
+
+	/*
+	 * Although the arm_gpio_lock was set in the probe function, check again
+	 * if it is still enabled to be able to write to the ModeX registers.
+	 */
+	ret = mlxbf2_gpio_lock_acquire(gs);
+	if (ret < 0)
+		return ret;
+
+	writel(BIT(offset), gs->gpio_io + YU_GPIO_MODE0_CLEAR);
+	writel(BIT(offset), gs->gpio_io + YU_GPIO_MODE1_CLEAR);
+
+	mlxbf2_gpio_lock_release(gs);
+
+	return ret;
+}
+
+/*
+ * Set output direction:
+ * {mode1,mode0} = {0,1}
+ */
+static int mlxbf2_gpio_direction_output(struct gpio_chip *chip,
+					unsigned int offset,
+					int value)
+{
+	struct mlxbf2_gpio_context *gs = gpiochip_get_data(chip);
+	int ret = 0;
+
+	/*
+	 * Although the arm_gpio_lock was set in the probe function,
+	 * check again it is still enabled to be able to write to the
+	 * ModeX registers.
+	 */
+	ret = mlxbf2_gpio_lock_acquire(gs);
+	if (ret < 0)
+		return ret;
+
+	writel(BIT(offset), gs->gpio_io + YU_GPIO_MODE1_CLEAR);
+	writel(BIT(offset), gs->gpio_io + YU_GPIO_MODE0_SET);
+
+	mlxbf2_gpio_lock_release(gs);
+
+	return ret;
+}
+
+/* BlueField-2 GPIO driver initialization routine. */
+static int
+mlxbf2_gpio_probe(struct platform_device *pdev)
+{
+	struct mlxbf2_gpio_context *gs;
+	struct device *dev = &pdev->dev;
+	struct gpio_chip *gc;
+	struct resource *res;
+	unsigned int npins;
+	int ret;
+
+	gs = devm_kzalloc(dev, sizeof(*gs), GFP_KERNEL);
+	if (!gs)
+		return -ENOMEM;
+
+	/* YU GPIO block address */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENODEV;
+
+	gs->gpio_io = devm_ioremap(dev, res->start, resource_size(res));
+	if (!gs->gpio_io)
+		return -ENOMEM;
+
+	ret = mlxbf2_gpio_get_lock_res(pdev);
+	if (ret) {
+		dev_err(dev, "Failed to get yu_arm_gpio_lock resource\n");
+		return ret;
+	}
+
+	if (device_property_read_u32(dev, "npins", &npins))
+		npins = MLXBF2_GPIO_MAX_PINS_PER_BLOCK;
+
+	gc = &gs->gc;
+
+	ret = bgpio_init(gc, dev, 4,
+			gs->gpio_io + YU_GPIO_DATAIN,
+			gs->gpio_io + YU_GPIO_DATASET,
+			gs->gpio_io + YU_GPIO_DATACLEAR,
+			NULL,
+			NULL,
+			0);
+
+	if (ret) {
+		dev_err(dev, "bgpio_init failed\n");
+		return ret;
+	}
+
+	gc->direction_input = mlxbf2_gpio_direction_input;
+	gc->direction_output = mlxbf2_gpio_direction_output;
+	gc->ngpio = npins;
+	gc->owner = THIS_MODULE;
+
+	platform_set_drvdata(pdev, gs);
+
+	ret = devm_gpiochip_add_data(dev, &gs->gc, gs);
+	if (ret) {
+		dev_err(dev, "Failed adding memory mapped gpiochip\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int mlxbf2_gpio_suspend(struct platform_device *pdev,
+				pm_message_t state)
+{
+	struct mlxbf2_gpio_context *gs = platform_get_drvdata(pdev);
+
+	gs->csave_regs->gpio_mode0 = readl(gs->gpio_io +
+		YU_GPIO_MODE0);
+	gs->csave_regs->gpio_mode1 = readl(gs->gpio_io +
+		YU_GPIO_MODE1);
+
+	return 0;
+}
+
+static int mlxbf2_gpio_resume(struct platform_device *pdev)
+{
+	struct mlxbf2_gpio_context *gs = platform_get_drvdata(pdev);
+
+	writel(gs->csave_regs->gpio_mode0, gs->gpio_io +
+		YU_GPIO_MODE0);
+	writel(gs->csave_regs->gpio_mode1, gs->gpio_io +
+		YU_GPIO_MODE1);
+
+	return 0;
+}
+#endif
+
+static const struct acpi_device_id __maybe_unused mlxbf2_gpio_acpi_match[] = {
+	{ "MLNXBF22", 0 },
+	{},
+};
+MODULE_DEVICE_TABLE(acpi, mlxbf2_gpio_acpi_match);
+
+static struct platform_driver mlxbf2_gpio_driver = {
+	.driver = {
+		.name = "mlxbf2_gpio",
+		.acpi_match_table = ACPI_PTR(mlxbf2_gpio_acpi_match),
+	},
+	.probe    = mlxbf2_gpio_probe,
+#ifdef CONFIG_PM
+	.suspend  = mlxbf2_gpio_suspend,
+	.resume   = mlxbf2_gpio_resume,
+#endif
+};
+
+module_platform_driver(mlxbf2_gpio_driver);
+
+MODULE_DESCRIPTION("Mellanox BlueField-2 GPIO Driver");
+MODULE_AUTHOR("Mellanox Technologies");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-mm-lantiq.c b/drivers/gpio/gpio-mm-lantiq.c
new file mode 100644
index 000000000..538e31fe8
--- /dev/null
+++ b/drivers/gpio/gpio-mm-lantiq.c
@@ -0,0 +1,159 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *
+ *  Copyright (C) 2012 John Crispin <john@phrozen.org>
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/gpio/driver.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+
+#include <lantiq_soc.h>
+
+/*
+ * By attaching hardware latches to the EBU it is possible to create output
+ * only gpios. This driver configures a special memory address, which when
+ * written to outputs 16 bit to the latches.
+ */
+
+#define LTQ_EBU_BUSCON	0x1e7ff		/* 16 bit access, slowest timing */
+#define LTQ_EBU_WP	0x80000000	/* write protect bit */
+
+struct ltq_mm {
+	struct of_mm_gpio_chip mmchip;
+	u16 shadow;	/* shadow the latches state */
+};
+
+/**
+ * ltq_mm_apply() - write the shadow value to the ebu address.
+ * @chip:     Pointer to our private data structure.
+ *
+ * Write the shadow value to the EBU to set the gpios. We need to set the
+ * global EBU lock to make sure that PCI/MTD don't break.
+ */
+static void ltq_mm_apply(struct ltq_mm *chip)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&ebu_lock, flags);
+	ltq_ebu_w32(LTQ_EBU_BUSCON, LTQ_EBU_BUSCON1);
+	__raw_writew(chip->shadow, chip->mmchip.regs);
+	ltq_ebu_w32(LTQ_EBU_BUSCON | LTQ_EBU_WP, LTQ_EBU_BUSCON1);
+	spin_unlock_irqrestore(&ebu_lock, flags);
+}
+
+/**
+ * ltq_mm_set() - gpio_chip->set - set gpios.
+ * @gc:     Pointer to gpio_chip device structure.
+ * @gpio:   GPIO signal number.
+ * @val:    Value to be written to specified signal.
+ *
+ * Set the shadow value and call ltq_mm_apply.
+ */
+static void ltq_mm_set(struct gpio_chip *gc, unsigned offset, int value)
+{
+	struct ltq_mm *chip = gpiochip_get_data(gc);
+
+	if (value)
+		chip->shadow |= (1 << offset);
+	else
+		chip->shadow &= ~(1 << offset);
+	ltq_mm_apply(chip);
+}
+
+/**
+ * ltq_mm_dir_out() - gpio_chip->dir_out - set gpio direction.
+ * @gc:     Pointer to gpio_chip device structure.
+ * @gpio:   GPIO signal number.
+ * @val:    Value to be written to specified signal.
+ *
+ * Same as ltq_mm_set, always returns 0.
+ */
+static int ltq_mm_dir_out(struct gpio_chip *gc, unsigned offset, int value)
+{
+	ltq_mm_set(gc, offset, value);
+
+	return 0;
+}
+
+/**
+ * ltq_mm_save_regs() - Set initial values of GPIO pins
+ * @mm_gc: pointer to memory mapped GPIO chip structure
+ */
+static void ltq_mm_save_regs(struct of_mm_gpio_chip *mm_gc)
+{
+	struct ltq_mm *chip =
+		container_of(mm_gc, struct ltq_mm, mmchip);
+
+	/* tell the ebu controller which memory address we will be using */
+	ltq_ebu_w32(CPHYSADDR(chip->mmchip.regs) | 0x1, LTQ_EBU_ADDRSEL1);
+
+	ltq_mm_apply(chip);
+}
+
+static int ltq_mm_probe(struct platform_device *pdev)
+{
+	struct ltq_mm *chip;
+	u32 shadow;
+
+	chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, chip);
+
+	chip->mmchip.gc.ngpio = 16;
+	chip->mmchip.gc.direction_output = ltq_mm_dir_out;
+	chip->mmchip.gc.set = ltq_mm_set;
+	chip->mmchip.save_regs = ltq_mm_save_regs;
+
+	/* store the shadow value if one was passed by the devicetree */
+	if (!of_property_read_u32(pdev->dev.of_node, "lantiq,shadow", &shadow))
+		chip->shadow = shadow;
+
+	return of_mm_gpiochip_add_data(pdev->dev.of_node, &chip->mmchip, chip);
+}
+
+static int ltq_mm_remove(struct platform_device *pdev)
+{
+	struct ltq_mm *chip = platform_get_drvdata(pdev);
+
+	of_mm_gpiochip_remove(&chip->mmchip);
+
+	return 0;
+}
+
+static const struct of_device_id ltq_mm_match[] = {
+	{ .compatible = "lantiq,gpio-mm" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, ltq_mm_match);
+
+static struct platform_driver ltq_mm_driver = {
+	.probe = ltq_mm_probe,
+	.remove = ltq_mm_remove,
+	.driver = {
+		.name = "gpio-mm-ltq",
+		.of_match_table = ltq_mm_match,
+	},
+};
+
+static int __init ltq_mm_init(void)
+{
+	return platform_driver_register(&ltq_mm_driver);
+}
+
+subsys_initcall(ltq_mm_init);
+
+static void __exit ltq_mm_exit(void)
+{
+	platform_driver_unregister(&ltq_mm_driver);
+}
+module_exit(ltq_mm_exit);
diff --git a/drivers/gpio/gpio-mmio.c b/drivers/gpio/gpio-mmio.c
new file mode 100644
index 000000000..c335a0309
--- /dev/null
+++ b/drivers/gpio/gpio-mmio.c
@@ -0,0 +1,822 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Generic driver for memory-mapped GPIO controllers.
+ *
+ * Copyright 2008 MontaVista Software, Inc.
+ * Copyright 2008,2010 Anton Vorontsov <cbouatmailru@gmail.com>
+ *
+ * ....``.```~~~~````.`.`.`.`.```````'',,,.........`````......`.......
+ * ...``                                                         ```````..
+ * ..The simplest form of a GPIO controller that the driver supports is``
+ *  `.just a single "data" register, where GPIO state can be read and/or `
+ *    `,..written. ,,..``~~~~ .....``.`.`.~~.```.`.........``````.```````
+ *        `````````
+                                    ___
+_/~~|___/~|   . ```~~~~~~       ___/___\___     ,~.`.`.`.`````.~~...,,,,...
+__________|~$@~~~        %~    /o*o*o*o*o*o\   .. Implementing such a GPIO .
+o        `                     ~~~~\___/~~~~    ` controller in FPGA is ,.`
+                                                 `....trivial..'~`.```.```
+ *                                                    ```````
+ *  .```````~~~~`..`.``.``.
+ * .  The driver supports  `...       ,..```.`~~~```````````````....````.``,,
+ * .   big-endian notation, just`.  .. A bit more sophisticated controllers ,
+ *  . register the device with -be`. .with a pair of set/clear-bit registers ,
+ *   `.. suffix.  ```~~`````....`.`   . affecting the data register and the .`
+ *     ``.`.``...```                  ```.. output pins are also supported.`
+ *                        ^^             `````.`````````.,``~``~``~~``````
+ *                                                   .                  ^^
+ *   ,..`.`.`...````````````......`.`.`.`.`.`..`.`.`..
+ * .. The expectation is that in at least some cases .    ,-~~~-,
+ *  .this will be used with roll-your-own ASIC/FPGA .`     \   /
+ *  .logic in Verilog or VHDL. ~~~`````````..`````~~`       \ /
+ *  ..````````......```````````                             \o_
+ *                                                           |
+ *                              ^^                          / \
+ *
+ *           ...`````~~`.....``.`..........``````.`.``.```........``.
+ *            `  8, 16, 32 and 64 bits registers are supported, and``.
+ *            . the number of GPIOs is determined by the width of   ~
+ *             .. the registers. ,............```.`.`..`.`.~~~.`.`.`~
+ *               `.......````.```
+ */
+
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/bug.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/compiler.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/log2.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/gpio/driver.h>
+#include <linux/slab.h>
+#include <linux/bitops.h>
+#include <linux/platform_device.h>
+#include <linux/mod_devicetable.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+
+static void bgpio_write8(void __iomem *reg, unsigned long data)
+{
+	writeb(data, reg);
+}
+
+static unsigned long bgpio_read8(void __iomem *reg)
+{
+	return readb(reg);
+}
+
+static void bgpio_write16(void __iomem *reg, unsigned long data)
+{
+	writew(data, reg);
+}
+
+static unsigned long bgpio_read16(void __iomem *reg)
+{
+	return readw(reg);
+}
+
+static void bgpio_write32(void __iomem *reg, unsigned long data)
+{
+	writel(data, reg);
+}
+
+static unsigned long bgpio_read32(void __iomem *reg)
+{
+	return readl(reg);
+}
+
+#if BITS_PER_LONG >= 64
+static void bgpio_write64(void __iomem *reg, unsigned long data)
+{
+	writeq(data, reg);
+}
+
+static unsigned long bgpio_read64(void __iomem *reg)
+{
+	return readq(reg);
+}
+#endif /* BITS_PER_LONG >= 64 */
+
+static void bgpio_write16be(void __iomem *reg, unsigned long data)
+{
+	iowrite16be(data, reg);
+}
+
+static unsigned long bgpio_read16be(void __iomem *reg)
+{
+	return ioread16be(reg);
+}
+
+static void bgpio_write32be(void __iomem *reg, unsigned long data)
+{
+	iowrite32be(data, reg);
+}
+
+static unsigned long bgpio_read32be(void __iomem *reg)
+{
+	return ioread32be(reg);
+}
+
+static unsigned long bgpio_line2mask(struct gpio_chip *gc, unsigned int line)
+{
+	if (gc->be_bits)
+		return BIT(gc->bgpio_bits - 1 - line);
+	return BIT(line);
+}
+
+static int bgpio_get_set(struct gpio_chip *gc, unsigned int gpio)
+{
+	unsigned long pinmask = bgpio_line2mask(gc, gpio);
+	bool dir = !!(gc->bgpio_dir & pinmask);
+
+	if (dir)
+		return !!(gc->read_reg(gc->reg_set) & pinmask);
+	else
+		return !!(gc->read_reg(gc->reg_dat) & pinmask);
+}
+
+/*
+ * This assumes that the bits in the GPIO register are in native endianness.
+ * We only assign the function pointer if we have that.
+ */
+static int bgpio_get_set_multiple(struct gpio_chip *gc, unsigned long *mask,
+				  unsigned long *bits)
+{
+	unsigned long get_mask = 0;
+	unsigned long set_mask = 0;
+
+	/* Make sure we first clear any bits that are zero when we read the register */
+	*bits &= ~*mask;
+
+	set_mask = *mask & gc->bgpio_dir;
+	get_mask = *mask & ~gc->bgpio_dir;
+
+	if (set_mask)
+		*bits |= gc->read_reg(gc->reg_set) & set_mask;
+	if (get_mask)
+		*bits |= gc->read_reg(gc->reg_dat) & get_mask;
+
+	return 0;
+}
+
+static int bgpio_get(struct gpio_chip *gc, unsigned int gpio)
+{
+	return !!(gc->read_reg(gc->reg_dat) & bgpio_line2mask(gc, gpio));
+}
+
+/*
+ * This only works if the bits in the GPIO register are in native endianness.
+ */
+static int bgpio_get_multiple(struct gpio_chip *gc, unsigned long *mask,
+			      unsigned long *bits)
+{
+	/* Make sure we first clear any bits that are zero when we read the register */
+	*bits &= ~*mask;
+	*bits |= gc->read_reg(gc->reg_dat) & *mask;
+	return 0;
+}
+
+/*
+ * With big endian mirrored bit order it becomes more tedious.
+ */
+static int bgpio_get_multiple_be(struct gpio_chip *gc, unsigned long *mask,
+				 unsigned long *bits)
+{
+	unsigned long readmask = 0;
+	unsigned long val;
+	int bit;
+
+	/* Make sure we first clear any bits that are zero when we read the register */
+	*bits &= ~*mask;
+
+	/* Create a mirrored mask */
+	for_each_set_bit(bit, mask, gc->ngpio)
+		readmask |= bgpio_line2mask(gc, bit);
+
+	/* Read the register */
+	val = gc->read_reg(gc->reg_dat) & readmask;
+
+	/*
+	 * Mirror the result into the "bits" result, this will give line 0
+	 * in bit 0 ... line 31 in bit 31 for a 32bit register.
+	 */
+	for_each_set_bit(bit, &val, gc->ngpio)
+		*bits |= bgpio_line2mask(gc, bit);
+
+	return 0;
+}
+
+static void bgpio_set_none(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+}
+
+static void bgpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+	unsigned long mask = bgpio_line2mask(gc, gpio);
+	unsigned long flags;
+
+	spin_lock_irqsave(&gc->bgpio_lock, flags);
+
+	if (val)
+		gc->bgpio_data |= mask;
+	else
+		gc->bgpio_data &= ~mask;
+
+	gc->write_reg(gc->reg_dat, gc->bgpio_data);
+
+	spin_unlock_irqrestore(&gc->bgpio_lock, flags);
+}
+
+static void bgpio_set_with_clear(struct gpio_chip *gc, unsigned int gpio,
+				 int val)
+{
+	unsigned long mask = bgpio_line2mask(gc, gpio);
+
+	if (val)
+		gc->write_reg(gc->reg_set, mask);
+	else
+		gc->write_reg(gc->reg_clr, mask);
+}
+
+static void bgpio_set_set(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+	unsigned long mask = bgpio_line2mask(gc, gpio);
+	unsigned long flags;
+
+	spin_lock_irqsave(&gc->bgpio_lock, flags);
+
+	if (val)
+		gc->bgpio_data |= mask;
+	else
+		gc->bgpio_data &= ~mask;
+
+	gc->write_reg(gc->reg_set, gc->bgpio_data);
+
+	spin_unlock_irqrestore(&gc->bgpio_lock, flags);
+}
+
+static void bgpio_multiple_get_masks(struct gpio_chip *gc,
+				     unsigned long *mask, unsigned long *bits,
+				     unsigned long *set_mask,
+				     unsigned long *clear_mask)
+{
+	int i;
+
+	*set_mask = 0;
+	*clear_mask = 0;
+
+	for_each_set_bit(i, mask, gc->bgpio_bits) {
+		if (test_bit(i, bits))
+			*set_mask |= bgpio_line2mask(gc, i);
+		else
+			*clear_mask |= bgpio_line2mask(gc, i);
+	}
+}
+
+static void bgpio_set_multiple_single_reg(struct gpio_chip *gc,
+					  unsigned long *mask,
+					  unsigned long *bits,
+					  void __iomem *reg)
+{
+	unsigned long flags;
+	unsigned long set_mask, clear_mask;
+
+	spin_lock_irqsave(&gc->bgpio_lock, flags);
+
+	bgpio_multiple_get_masks(gc, mask, bits, &set_mask, &clear_mask);
+
+	gc->bgpio_data |= set_mask;
+	gc->bgpio_data &= ~clear_mask;
+
+	gc->write_reg(reg, gc->bgpio_data);
+
+	spin_unlock_irqrestore(&gc->bgpio_lock, flags);
+}
+
+static void bgpio_set_multiple(struct gpio_chip *gc, unsigned long *mask,
+			       unsigned long *bits)
+{
+	bgpio_set_multiple_single_reg(gc, mask, bits, gc->reg_dat);
+}
+
+static void bgpio_set_multiple_set(struct gpio_chip *gc, unsigned long *mask,
+				   unsigned long *bits)
+{
+	bgpio_set_multiple_single_reg(gc, mask, bits, gc->reg_set);
+}
+
+static void bgpio_set_multiple_with_clear(struct gpio_chip *gc,
+					  unsigned long *mask,
+					  unsigned long *bits)
+{
+	unsigned long set_mask, clear_mask;
+
+	bgpio_multiple_get_masks(gc, mask, bits, &set_mask, &clear_mask);
+
+	if (set_mask)
+		gc->write_reg(gc->reg_set, set_mask);
+	if (clear_mask)
+		gc->write_reg(gc->reg_clr, clear_mask);
+}
+
+static int bgpio_simple_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+	return 0;
+}
+
+static int bgpio_dir_out_err(struct gpio_chip *gc, unsigned int gpio,
+				int val)
+{
+	return -EINVAL;
+}
+
+static int bgpio_simple_dir_out(struct gpio_chip *gc, unsigned int gpio,
+				int val)
+{
+	gc->set(gc, gpio, val);
+
+	return 0;
+}
+
+static int bgpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&gc->bgpio_lock, flags);
+
+	gc->bgpio_dir &= ~bgpio_line2mask(gc, gpio);
+
+	if (gc->reg_dir_in)
+		gc->write_reg(gc->reg_dir_in, ~gc->bgpio_dir);
+	if (gc->reg_dir_out)
+		gc->write_reg(gc->reg_dir_out, gc->bgpio_dir);
+
+	spin_unlock_irqrestore(&gc->bgpio_lock, flags);
+
+	return 0;
+}
+
+static int bgpio_get_dir(struct gpio_chip *gc, unsigned int gpio)
+{
+	/* Return 0 if output, 1 if input */
+	if (gc->bgpio_dir_unreadable) {
+		if (gc->bgpio_dir & bgpio_line2mask(gc, gpio))
+			return GPIO_LINE_DIRECTION_OUT;
+		return GPIO_LINE_DIRECTION_IN;
+	}
+
+	if (gc->reg_dir_out) {
+		if (gc->read_reg(gc->reg_dir_out) & bgpio_line2mask(gc, gpio))
+			return GPIO_LINE_DIRECTION_OUT;
+		return GPIO_LINE_DIRECTION_IN;
+	}
+
+	if (gc->reg_dir_in)
+		if (!(gc->read_reg(gc->reg_dir_in) & bgpio_line2mask(gc, gpio)))
+			return GPIO_LINE_DIRECTION_OUT;
+
+	return GPIO_LINE_DIRECTION_IN;
+}
+
+static void bgpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&gc->bgpio_lock, flags);
+
+	gc->bgpio_dir |= bgpio_line2mask(gc, gpio);
+
+	if (gc->reg_dir_in)
+		gc->write_reg(gc->reg_dir_in, ~gc->bgpio_dir);
+	if (gc->reg_dir_out)
+		gc->write_reg(gc->reg_dir_out, gc->bgpio_dir);
+
+	spin_unlock_irqrestore(&gc->bgpio_lock, flags);
+}
+
+static int bgpio_dir_out_dir_first(struct gpio_chip *gc, unsigned int gpio,
+				   int val)
+{
+	bgpio_dir_out(gc, gpio, val);
+	gc->set(gc, gpio, val);
+	return 0;
+}
+
+static int bgpio_dir_out_val_first(struct gpio_chip *gc, unsigned int gpio,
+				   int val)
+{
+	gc->set(gc, gpio, val);
+	bgpio_dir_out(gc, gpio, val);
+	return 0;
+}
+
+static int bgpio_setup_accessors(struct device *dev,
+				 struct gpio_chip *gc,
+				 bool byte_be)
+{
+
+	switch (gc->bgpio_bits) {
+	case 8:
+		gc->read_reg	= bgpio_read8;
+		gc->write_reg	= bgpio_write8;
+		break;
+	case 16:
+		if (byte_be) {
+			gc->read_reg	= bgpio_read16be;
+			gc->write_reg	= bgpio_write16be;
+		} else {
+			gc->read_reg	= bgpio_read16;
+			gc->write_reg	= bgpio_write16;
+		}
+		break;
+	case 32:
+		if (byte_be) {
+			gc->read_reg	= bgpio_read32be;
+			gc->write_reg	= bgpio_write32be;
+		} else {
+			gc->read_reg	= bgpio_read32;
+			gc->write_reg	= bgpio_write32;
+		}
+		break;
+#if BITS_PER_LONG >= 64
+	case 64:
+		if (byte_be) {
+			dev_err(dev,
+				"64 bit big endian byte order unsupported\n");
+			return -EINVAL;
+		} else {
+			gc->read_reg	= bgpio_read64;
+			gc->write_reg	= bgpio_write64;
+		}
+		break;
+#endif /* BITS_PER_LONG >= 64 */
+	default:
+		dev_err(dev, "unsupported data width %u bits\n", gc->bgpio_bits);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/*
+ * Create the device and allocate the resources.  For setting GPIO's there are
+ * three supported configurations:
+ *
+ *	- single input/output register resource (named "dat").
+ *	- set/clear pair (named "set" and "clr").
+ *	- single output register resource and single input resource ("set" and
+ *	dat").
+ *
+ * For the single output register, this drives a 1 by setting a bit and a zero
+ * by clearing a bit.  For the set clr pair, this drives a 1 by setting a bit
+ * in the set register and clears it by setting a bit in the clear register.
+ * The configuration is detected by which resources are present.
+ *
+ * For setting the GPIO direction, there are three supported configurations:
+ *
+ *	- simple bidirection GPIO that requires no configuration.
+ *	- an output direction register (named "dirout") where a 1 bit
+ *	indicates the GPIO is an output.
+ *	- an input direction register (named "dirin") where a 1 bit indicates
+ *	the GPIO is an input.
+ */
+static int bgpio_setup_io(struct gpio_chip *gc,
+			  void __iomem *dat,
+			  void __iomem *set,
+			  void __iomem *clr,
+			  unsigned long flags)
+{
+
+	gc->reg_dat = dat;
+	if (!gc->reg_dat)
+		return -EINVAL;
+
+	if (set && clr) {
+		gc->reg_set = set;
+		gc->reg_clr = clr;
+		gc->set = bgpio_set_with_clear;
+		gc->set_multiple = bgpio_set_multiple_with_clear;
+	} else if (set && !clr) {
+		gc->reg_set = set;
+		gc->set = bgpio_set_set;
+		gc->set_multiple = bgpio_set_multiple_set;
+	} else if (flags & BGPIOF_NO_OUTPUT) {
+		gc->set = bgpio_set_none;
+		gc->set_multiple = NULL;
+	} else {
+		gc->set = bgpio_set;
+		gc->set_multiple = bgpio_set_multiple;
+	}
+
+	if (!(flags & BGPIOF_UNREADABLE_REG_SET) &&
+	    (flags & BGPIOF_READ_OUTPUT_REG_SET)) {
+		gc->get = bgpio_get_set;
+		if (!gc->be_bits)
+			gc->get_multiple = bgpio_get_set_multiple;
+		/*
+		 * We deliberately avoid assigning the ->get_multiple() call
+		 * for big endian mirrored registers which are ALSO reflecting
+		 * their value in the set register when used as output. It is
+		 * simply too much complexity, let the GPIO core fall back to
+		 * reading each line individually in that fringe case.
+		 */
+	} else {
+		gc->get = bgpio_get;
+		if (gc->be_bits)
+			gc->get_multiple = bgpio_get_multiple_be;
+		else
+			gc->get_multiple = bgpio_get_multiple;
+	}
+
+	return 0;
+}
+
+static int bgpio_setup_direction(struct gpio_chip *gc,
+				 void __iomem *dirout,
+				 void __iomem *dirin,
+				 unsigned long flags)
+{
+	if (dirout || dirin) {
+		gc->reg_dir_out = dirout;
+		gc->reg_dir_in = dirin;
+		if (flags & BGPIOF_NO_SET_ON_INPUT)
+			gc->direction_output = bgpio_dir_out_dir_first;
+		else
+			gc->direction_output = bgpio_dir_out_val_first;
+		gc->direction_input = bgpio_dir_in;
+		gc->get_direction = bgpio_get_dir;
+	} else {
+		if (flags & BGPIOF_NO_OUTPUT)
+			gc->direction_output = bgpio_dir_out_err;
+		else
+			gc->direction_output = bgpio_simple_dir_out;
+		gc->direction_input = bgpio_simple_dir_in;
+	}
+
+	return 0;
+}
+
+static int bgpio_request(struct gpio_chip *chip, unsigned gpio_pin)
+{
+	if (gpio_pin < chip->ngpio)
+		return 0;
+
+	return -EINVAL;
+}
+
+/**
+ * bgpio_init() - Initialize generic GPIO accessor functions
+ * @gc: the GPIO chip to set up
+ * @dev: the parent device of the new GPIO chip (compulsory)
+ * @sz: the size (width) of the MMIO registers in bytes, typically 1, 2 or 4
+ * @dat: MMIO address for the register to READ the value of the GPIO lines, it
+ *	is expected that a 1 in the corresponding bit in this register means the
+ *	line is asserted
+ * @set: MMIO address for the register to SET the value of the GPIO lines, it is
+ *	expected that we write the line with 1 in this register to drive the GPIO line
+ *	high.
+ * @clr: MMIO address for the register to CLEAR the value of the GPIO lines, it is
+ *	expected that we write the line with 1 in this register to drive the GPIO line
+ *	low. It is allowed to leave this address as NULL, in that case the SET register
+ *	will be assumed to also clear the GPIO lines, by actively writing the line
+ *	with 0.
+ * @dirout: MMIO address for the register to set the line as OUTPUT. It is assumed
+ *	that setting a line to 1 in this register will turn that line into an
+ *	output line. Conversely, setting the line to 0 will turn that line into
+ *	an input.
+ * @dirin: MMIO address for the register to set this line as INPUT. It is assumed
+ *	that setting a line to 1 in this register will turn that line into an
+ *	input line. Conversely, setting the line to 0 will turn that line into
+ *	an output.
+ * @flags: Different flags that will affect the behaviour of the device, such as
+ *	endianness etc.
+ */
+int bgpio_init(struct gpio_chip *gc, struct device *dev,
+	       unsigned long sz, void __iomem *dat, void __iomem *set,
+	       void __iomem *clr, void __iomem *dirout, void __iomem *dirin,
+	       unsigned long flags)
+{
+	int ret;
+
+	if (!is_power_of_2(sz))
+		return -EINVAL;
+
+	gc->bgpio_bits = sz * 8;
+	if (gc->bgpio_bits > BITS_PER_LONG)
+		return -EINVAL;
+
+	spin_lock_init(&gc->bgpio_lock);
+	gc->parent = dev;
+	gc->label = dev_name(dev);
+	gc->base = -1;
+	gc->ngpio = gc->bgpio_bits;
+	gc->request = bgpio_request;
+	gc->be_bits = !!(flags & BGPIOF_BIG_ENDIAN);
+
+	ret = bgpio_setup_io(gc, dat, set, clr, flags);
+	if (ret)
+		return ret;
+
+	ret = bgpio_setup_accessors(dev, gc, flags & BGPIOF_BIG_ENDIAN_BYTE_ORDER);
+	if (ret)
+		return ret;
+
+	ret = bgpio_setup_direction(gc, dirout, dirin, flags);
+	if (ret)
+		return ret;
+
+	gc->bgpio_data = gc->read_reg(gc->reg_dat);
+	if (gc->set == bgpio_set_set &&
+			!(flags & BGPIOF_UNREADABLE_REG_SET))
+		gc->bgpio_data = gc->read_reg(gc->reg_set);
+
+	if (flags & BGPIOF_UNREADABLE_REG_DIR)
+		gc->bgpio_dir_unreadable = true;
+
+	/*
+	 * Inspect hardware to find initial direction setting.
+	 */
+	if ((gc->reg_dir_out || gc->reg_dir_in) &&
+	    !(flags & BGPIOF_UNREADABLE_REG_DIR)) {
+		if (gc->reg_dir_out)
+			gc->bgpio_dir = gc->read_reg(gc->reg_dir_out);
+		else if (gc->reg_dir_in)
+			gc->bgpio_dir = ~gc->read_reg(gc->reg_dir_in);
+		/*
+		 * If we have two direction registers, synchronise
+		 * input setting to output setting, the library
+		 * can not handle a line being input and output at
+		 * the same time.
+		 */
+		if (gc->reg_dir_out && gc->reg_dir_in)
+			gc->write_reg(gc->reg_dir_in, ~gc->bgpio_dir);
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(bgpio_init);
+
+#if IS_ENABLED(CONFIG_GPIO_GENERIC_PLATFORM)
+
+static void __iomem *bgpio_map(struct platform_device *pdev,
+			       const char *name,
+			       resource_size_t sane_sz)
+{
+	struct resource *r;
+	resource_size_t sz;
+
+	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, name);
+	if (!r)
+		return NULL;
+
+	sz = resource_size(r);
+	if (sz != sane_sz)
+		return IOMEM_ERR_PTR(-EINVAL);
+
+	return devm_ioremap_resource(&pdev->dev, r);
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id bgpio_of_match[] = {
+	{ .compatible = "brcm,bcm6345-gpio" },
+	{ .compatible = "wd,mbl-gpio" },
+	{ .compatible = "ni,169445-nand-gpio" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, bgpio_of_match);
+
+static struct bgpio_pdata *bgpio_parse_dt(struct platform_device *pdev,
+					  unsigned long *flags)
+{
+	struct bgpio_pdata *pdata;
+
+	if (!of_match_device(bgpio_of_match, &pdev->dev))
+		return NULL;
+
+	pdata = devm_kzalloc(&pdev->dev, sizeof(struct bgpio_pdata),
+			     GFP_KERNEL);
+	if (!pdata)
+		return ERR_PTR(-ENOMEM);
+
+	pdata->base = -1;
+
+	if (of_device_is_big_endian(pdev->dev.of_node))
+		*flags |= BGPIOF_BIG_ENDIAN_BYTE_ORDER;
+
+	if (of_property_read_bool(pdev->dev.of_node, "no-output"))
+		*flags |= BGPIOF_NO_OUTPUT;
+
+	return pdata;
+}
+#else
+static struct bgpio_pdata *bgpio_parse_dt(struct platform_device *pdev,
+					  unsigned long *flags)
+{
+	return NULL;
+}
+#endif /* CONFIG_OF */
+
+static int bgpio_pdev_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct resource *r;
+	void __iomem *dat;
+	void __iomem *set;
+	void __iomem *clr;
+	void __iomem *dirout;
+	void __iomem *dirin;
+	unsigned long sz;
+	unsigned long flags = 0;
+	int err;
+	struct gpio_chip *gc;
+	struct bgpio_pdata *pdata;
+
+	pdata = bgpio_parse_dt(pdev, &flags);
+	if (IS_ERR(pdata))
+		return PTR_ERR(pdata);
+
+	if (!pdata) {
+		pdata = dev_get_platdata(dev);
+		flags = pdev->id_entry->driver_data;
+	}
+
+	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dat");
+	if (!r)
+		return -EINVAL;
+
+	sz = resource_size(r);
+
+	dat = bgpio_map(pdev, "dat", sz);
+	if (IS_ERR(dat))
+		return PTR_ERR(dat);
+
+	set = bgpio_map(pdev, "set", sz);
+	if (IS_ERR(set))
+		return PTR_ERR(set);
+
+	clr = bgpio_map(pdev, "clr", sz);
+	if (IS_ERR(clr))
+		return PTR_ERR(clr);
+
+	dirout = bgpio_map(pdev, "dirout", sz);
+	if (IS_ERR(dirout))
+		return PTR_ERR(dirout);
+
+	dirin = bgpio_map(pdev, "dirin", sz);
+	if (IS_ERR(dirin))
+		return PTR_ERR(dirin);
+
+	gc = devm_kzalloc(&pdev->dev, sizeof(*gc), GFP_KERNEL);
+	if (!gc)
+		return -ENOMEM;
+
+	err = bgpio_init(gc, dev, sz, dat, set, clr, dirout, dirin, flags);
+	if (err)
+		return err;
+
+	if (pdata) {
+		if (pdata->label)
+			gc->label = pdata->label;
+		gc->base = pdata->base;
+		if (pdata->ngpio > 0)
+			gc->ngpio = pdata->ngpio;
+	}
+
+	platform_set_drvdata(pdev, gc);
+
+	return devm_gpiochip_add_data(&pdev->dev, gc, NULL);
+}
+
+static const struct platform_device_id bgpio_id_table[] = {
+	{
+		.name		= "basic-mmio-gpio",
+		.driver_data	= 0,
+	}, {
+		.name		= "basic-mmio-gpio-be",
+		.driver_data	= BGPIOF_BIG_ENDIAN,
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(platform, bgpio_id_table);
+
+static struct platform_driver bgpio_driver = {
+	.driver = {
+		.name = "basic-mmio-gpio",
+		.of_match_table = of_match_ptr(bgpio_of_match),
+	},
+	.id_table = bgpio_id_table,
+	.probe = bgpio_pdev_probe,
+};
+
+module_platform_driver(bgpio_driver);
+
+#endif /* CONFIG_GPIO_GENERIC_PLATFORM */
+
+MODULE_DESCRIPTION("Driver for basic memory-mapped GPIO controllers");
+MODULE_AUTHOR("Anton Vorontsov <cbouatmailru@gmail.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/gpio-mockup.c b/drivers/gpio/gpio-mockup.c
new file mode 100644
index 000000000..e20b60432
--- /dev/null
+++ b/drivers/gpio/gpio-mockup.c
@@ -0,0 +1,619 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * GPIO Testing Device Driver
+ *
+ * Copyright (C) 2014  Kamlakant Patel <kamlakant.patel@broadcom.com>
+ * Copyright (C) 2015-2016  Bamvor Jian Zhang <bamv2005@gmail.com>
+ * Copyright (C) 2017 Bartosz Golaszewski <brgl@bgdev.pl>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/debugfs.h>
+#include <linux/gpio/driver.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irq_sim.h>
+#include <linux/irqdomain.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/slab.h>
+#include <linux/string_helpers.h>
+#include <linux/uaccess.h>
+
+#include "gpiolib.h"
+
+#define GPIO_MOCKUP_MAX_GC	10
+/*
+ * We're storing two values per chip: the GPIO base and the number
+ * of GPIO lines.
+ */
+#define GPIO_MOCKUP_MAX_RANGES	(GPIO_MOCKUP_MAX_GC * 2)
+/* Maximum of four properties + the sentinel. */
+#define GPIO_MOCKUP_MAX_PROP	5
+
+/*
+ * struct gpio_pin_status - structure describing a GPIO status
+ * @dir:       Configures direction of gpio as "in" or "out"
+ * @value:     Configures status of the gpio as 0(low) or 1(high)
+ */
+struct gpio_mockup_line_status {
+	int dir;
+	int value;
+	int pull;
+};
+
+struct gpio_mockup_chip {
+	struct gpio_chip gc;
+	struct gpio_mockup_line_status *lines;
+	struct irq_domain *irq_sim_domain;
+	struct dentry *dbg_dir;
+	struct mutex lock;
+};
+
+struct gpio_mockup_dbgfs_private {
+	struct gpio_mockup_chip *chip;
+	struct gpio_desc *desc;
+	unsigned int offset;
+};
+
+static int gpio_mockup_ranges[GPIO_MOCKUP_MAX_RANGES];
+static int gpio_mockup_num_ranges;
+module_param_array(gpio_mockup_ranges, int, &gpio_mockup_num_ranges, 0400);
+
+static bool gpio_mockup_named_lines;
+module_param_named(gpio_mockup_named_lines,
+		   gpio_mockup_named_lines, bool, 0400);
+
+static struct dentry *gpio_mockup_dbg_dir;
+
+static int gpio_mockup_range_base(unsigned int index)
+{
+	return gpio_mockup_ranges[index * 2];
+}
+
+static int gpio_mockup_range_ngpio(unsigned int index)
+{
+	return gpio_mockup_ranges[index * 2 + 1];
+}
+
+static int __gpio_mockup_get(struct gpio_mockup_chip *chip,
+			     unsigned int offset)
+{
+	return chip->lines[offset].value;
+}
+
+static int gpio_mockup_get(struct gpio_chip *gc, unsigned int offset)
+{
+	struct gpio_mockup_chip *chip = gpiochip_get_data(gc);
+	int val;
+
+	mutex_lock(&chip->lock);
+	val = __gpio_mockup_get(chip, offset);
+	mutex_unlock(&chip->lock);
+
+	return val;
+}
+
+static int gpio_mockup_get_multiple(struct gpio_chip *gc,
+				    unsigned long *mask, unsigned long *bits)
+{
+	struct gpio_mockup_chip *chip = gpiochip_get_data(gc);
+	unsigned int bit, val;
+
+	mutex_lock(&chip->lock);
+	for_each_set_bit(bit, mask, gc->ngpio) {
+		val = __gpio_mockup_get(chip, bit);
+		__assign_bit(bit, bits, val);
+	}
+	mutex_unlock(&chip->lock);
+
+	return 0;
+}
+
+static void __gpio_mockup_set(struct gpio_mockup_chip *chip,
+			      unsigned int offset, int value)
+{
+	chip->lines[offset].value = !!value;
+}
+
+static void gpio_mockup_set(struct gpio_chip *gc,
+			   unsigned int offset, int value)
+{
+	struct gpio_mockup_chip *chip = gpiochip_get_data(gc);
+
+	mutex_lock(&chip->lock);
+	__gpio_mockup_set(chip, offset, value);
+	mutex_unlock(&chip->lock);
+}
+
+static void gpio_mockup_set_multiple(struct gpio_chip *gc,
+				     unsigned long *mask, unsigned long *bits)
+{
+	struct gpio_mockup_chip *chip = gpiochip_get_data(gc);
+	unsigned int bit;
+
+	mutex_lock(&chip->lock);
+	for_each_set_bit(bit, mask, gc->ngpio)
+		__gpio_mockup_set(chip, bit, test_bit(bit, bits));
+	mutex_unlock(&chip->lock);
+}
+
+static int gpio_mockup_apply_pull(struct gpio_mockup_chip *chip,
+				  unsigned int offset, int value)
+{
+	int curr, irq, irq_type, ret = 0;
+	struct gpio_desc *desc;
+	struct gpio_chip *gc;
+
+	gc = &chip->gc;
+	desc = &gc->gpiodev->descs[offset];
+
+	mutex_lock(&chip->lock);
+
+	if (test_bit(FLAG_REQUESTED, &desc->flags) &&
+	    !test_bit(FLAG_IS_OUT, &desc->flags)) {
+		curr = __gpio_mockup_get(chip, offset);
+		if (curr == value)
+			goto out;
+
+		irq = irq_find_mapping(chip->irq_sim_domain, offset);
+		if (!irq)
+			/*
+			 * This is fine - it just means, nobody is listening
+			 * for interrupts on this line, otherwise
+			 * irq_create_mapping() would have been called from
+			 * the to_irq() callback.
+			 */
+			goto set_value;
+
+		irq_type = irq_get_trigger_type(irq);
+
+		if ((value == 1 && (irq_type & IRQ_TYPE_EDGE_RISING)) ||
+		    (value == 0 && (irq_type & IRQ_TYPE_EDGE_FALLING))) {
+			ret = irq_set_irqchip_state(irq, IRQCHIP_STATE_PENDING,
+						    true);
+			if (ret)
+				goto out;
+		}
+	}
+
+set_value:
+	/* Change the value unless we're actively driving the line. */
+	if (!test_bit(FLAG_REQUESTED, &desc->flags) ||
+	    !test_bit(FLAG_IS_OUT, &desc->flags))
+		__gpio_mockup_set(chip, offset, value);
+
+out:
+	chip->lines[offset].pull = value;
+	mutex_unlock(&chip->lock);
+	return ret;
+}
+
+static int gpio_mockup_set_config(struct gpio_chip *gc,
+				  unsigned int offset, unsigned long config)
+{
+	struct gpio_mockup_chip *chip = gpiochip_get_data(gc);
+
+	switch (pinconf_to_config_param(config)) {
+	case PIN_CONFIG_BIAS_PULL_UP:
+		return gpio_mockup_apply_pull(chip, offset, 1);
+	case PIN_CONFIG_BIAS_PULL_DOWN:
+		return gpio_mockup_apply_pull(chip, offset, 0);
+	default:
+		break;
+	}
+	return -ENOTSUPP;
+}
+
+static int gpio_mockup_dirout(struct gpio_chip *gc,
+			      unsigned int offset, int value)
+{
+	struct gpio_mockup_chip *chip = gpiochip_get_data(gc);
+
+	mutex_lock(&chip->lock);
+	chip->lines[offset].dir = GPIO_LINE_DIRECTION_OUT;
+	__gpio_mockup_set(chip, offset, value);
+	mutex_unlock(&chip->lock);
+
+	return 0;
+}
+
+static int gpio_mockup_dirin(struct gpio_chip *gc, unsigned int offset)
+{
+	struct gpio_mockup_chip *chip = gpiochip_get_data(gc);
+
+	mutex_lock(&chip->lock);
+	chip->lines[offset].dir = GPIO_LINE_DIRECTION_IN;
+	mutex_unlock(&chip->lock);
+
+	return 0;
+}
+
+static int gpio_mockup_get_direction(struct gpio_chip *gc, unsigned int offset)
+{
+	struct gpio_mockup_chip *chip = gpiochip_get_data(gc);
+	int direction;
+
+	mutex_lock(&chip->lock);
+	direction = chip->lines[offset].dir;
+	mutex_unlock(&chip->lock);
+
+	return direction;
+}
+
+static int gpio_mockup_to_irq(struct gpio_chip *gc, unsigned int offset)
+{
+	struct gpio_mockup_chip *chip = gpiochip_get_data(gc);
+
+	return irq_create_mapping(chip->irq_sim_domain, offset);
+}
+
+static void gpio_mockup_free(struct gpio_chip *gc, unsigned int offset)
+{
+	struct gpio_mockup_chip *chip = gpiochip_get_data(gc);
+
+	__gpio_mockup_set(chip, offset, chip->lines[offset].pull);
+}
+
+static ssize_t gpio_mockup_debugfs_read(struct file *file,
+					char __user *usr_buf,
+					size_t size, loff_t *ppos)
+{
+	struct gpio_mockup_dbgfs_private *priv;
+	struct gpio_mockup_chip *chip;
+	struct seq_file *sfile;
+	struct gpio_chip *gc;
+	int val, cnt;
+	char buf[3];
+
+	if (*ppos != 0)
+		return 0;
+
+	sfile = file->private_data;
+	priv = sfile->private;
+	chip = priv->chip;
+	gc = &chip->gc;
+
+	val = gpio_mockup_get(gc, priv->offset);
+	cnt = snprintf(buf, sizeof(buf), "%d\n", val);
+
+	return simple_read_from_buffer(usr_buf, size, ppos, buf, cnt);
+}
+
+static ssize_t gpio_mockup_debugfs_write(struct file *file,
+					 const char __user *usr_buf,
+					 size_t size, loff_t *ppos)
+{
+	struct gpio_mockup_dbgfs_private *priv;
+	int rv, val;
+	struct seq_file *sfile;
+
+	if (*ppos != 0)
+		return -EINVAL;
+
+	rv = kstrtoint_from_user(usr_buf, size, 0, &val);
+	if (rv)
+		return rv;
+	if (val != 0 && val != 1)
+		return -EINVAL;
+
+	sfile = file->private_data;
+	priv = sfile->private;
+	rv = gpio_mockup_apply_pull(priv->chip, priv->offset, val);
+	if (rv)
+		return rv;
+
+	return size;
+}
+
+static int gpio_mockup_debugfs_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, NULL, inode->i_private);
+}
+
+/*
+ * Each mockup chip is represented by a directory named after the chip's device
+ * name under /sys/kernel/debug/gpio-mockup/. Each line is represented by
+ * a file using the line's offset as the name under the chip's directory.
+ *
+ * Reading from the line's file yields the current *value*, writing to the
+ * line's file changes the current *pull*. Default pull for mockup lines is
+ * down.
+ *
+ * Examples:
+ * - when a line pulled down is requested in output mode and driven high, its
+ *   value will return to 0 once it's released
+ * - when the line is requested in output mode and driven high, writing 0 to
+ *   the corresponding debugfs file will change the pull to down but the
+ *   reported value will still be 1 until the line is released
+ * - line requested in input mode always reports the same value as its pull
+ *   configuration
+ * - when the line is requested in input mode and monitored for events, writing
+ *   the same value to the debugfs file will be a noop, while writing the
+ *   opposite value will generate a dummy interrupt with an appropriate edge
+ */
+static const struct file_operations gpio_mockup_debugfs_ops = {
+	.owner = THIS_MODULE,
+	.open = gpio_mockup_debugfs_open,
+	.read = gpio_mockup_debugfs_read,
+	.write = gpio_mockup_debugfs_write,
+	.llseek = no_llseek,
+	.release = single_release,
+};
+
+static void gpio_mockup_debugfs_setup(struct device *dev,
+				      struct gpio_mockup_chip *chip)
+{
+	struct gpio_mockup_dbgfs_private *priv;
+	struct gpio_chip *gc;
+	const char *devname;
+	char *name;
+	int i;
+
+	gc = &chip->gc;
+	devname = dev_name(&gc->gpiodev->dev);
+
+	chip->dbg_dir = debugfs_create_dir(devname, gpio_mockup_dbg_dir);
+
+	for (i = 0; i < gc->ngpio; i++) {
+		name = devm_kasprintf(dev, GFP_KERNEL, "%d", i);
+		if (!name)
+			return;
+
+		priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+		if (!priv)
+			return;
+
+		priv->chip = chip;
+		priv->offset = i;
+		priv->desc = &gc->gpiodev->descs[i];
+
+		debugfs_create_file(name, 0600, chip->dbg_dir, priv,
+				    &gpio_mockup_debugfs_ops);
+	}
+}
+
+static void gpio_mockup_debugfs_cleanup(void *data)
+{
+	struct gpio_mockup_chip *chip = data;
+
+	debugfs_remove_recursive(chip->dbg_dir);
+}
+
+static void gpio_mockup_dispose_mappings(void *data)
+{
+	struct gpio_mockup_chip *chip = data;
+	struct gpio_chip *gc = &chip->gc;
+	int i, irq;
+
+	for (i = 0; i < gc->ngpio; i++) {
+		irq = irq_find_mapping(chip->irq_sim_domain, i);
+		if (irq)
+			irq_dispose_mapping(irq);
+	}
+}
+
+static int gpio_mockup_probe(struct platform_device *pdev)
+{
+	struct gpio_mockup_chip *chip;
+	struct gpio_chip *gc;
+	struct device *dev;
+	const char *name;
+	int rv, base, i;
+	u16 ngpio;
+
+	dev = &pdev->dev;
+
+	rv = device_property_read_u32(dev, "gpio-base", &base);
+	if (rv)
+		base = -1;
+
+	rv = device_property_read_u16(dev, "nr-gpios", &ngpio);
+	if (rv)
+		return rv;
+
+	rv = device_property_read_string(dev, "chip-label", &name);
+	if (rv)
+		name = dev_name(dev);
+
+	chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	mutex_init(&chip->lock);
+
+	gc = &chip->gc;
+	gc->base = base;
+	gc->ngpio = ngpio;
+	gc->label = name;
+	gc->owner = THIS_MODULE;
+	gc->parent = dev;
+	gc->get = gpio_mockup_get;
+	gc->set = gpio_mockup_set;
+	gc->get_multiple = gpio_mockup_get_multiple;
+	gc->set_multiple = gpio_mockup_set_multiple;
+	gc->direction_output = gpio_mockup_dirout;
+	gc->direction_input = gpio_mockup_dirin;
+	gc->get_direction = gpio_mockup_get_direction;
+	gc->set_config = gpio_mockup_set_config;
+	gc->to_irq = gpio_mockup_to_irq;
+	gc->free = gpio_mockup_free;
+
+	chip->lines = devm_kcalloc(dev, gc->ngpio,
+				   sizeof(*chip->lines), GFP_KERNEL);
+	if (!chip->lines)
+		return -ENOMEM;
+
+	for (i = 0; i < gc->ngpio; i++)
+		chip->lines[i].dir = GPIO_LINE_DIRECTION_IN;
+
+	chip->irq_sim_domain = devm_irq_domain_create_sim(dev, NULL,
+							  gc->ngpio);
+	if (IS_ERR(chip->irq_sim_domain))
+		return PTR_ERR(chip->irq_sim_domain);
+
+	rv = devm_add_action_or_reset(dev, gpio_mockup_dispose_mappings, chip);
+	if (rv)
+		return rv;
+
+	rv = devm_gpiochip_add_data(dev, &chip->gc, chip);
+	if (rv)
+		return rv;
+
+	gpio_mockup_debugfs_setup(dev, chip);
+
+	return devm_add_action_or_reset(dev, gpio_mockup_debugfs_cleanup, chip);
+}
+
+static struct platform_driver gpio_mockup_driver = {
+	.driver = {
+		.name = "gpio-mockup",
+	},
+	.probe = gpio_mockup_probe,
+};
+
+static struct platform_device *gpio_mockup_pdevs[GPIO_MOCKUP_MAX_GC];
+
+static void gpio_mockup_unregister_pdevs(void)
+{
+	struct platform_device *pdev;
+	int i;
+
+	for (i = 0; i < GPIO_MOCKUP_MAX_GC; i++) {
+		pdev = gpio_mockup_pdevs[i];
+
+		if (pdev)
+			platform_device_unregister(pdev);
+	}
+}
+
+static __init char **gpio_mockup_make_line_names(const char *label,
+						 unsigned int num_lines)
+{
+	unsigned int i;
+	char **names;
+
+	names = kcalloc(num_lines + 1, sizeof(char *), GFP_KERNEL);
+	if (!names)
+		return NULL;
+
+	for (i = 0; i < num_lines; i++) {
+		names[i] = kasprintf(GFP_KERNEL, "%s-%u", label, i);
+		if (!names[i]) {
+			kfree_strarray(names, i);
+			return NULL;
+		}
+	}
+
+	return names;
+}
+
+static int __init gpio_mockup_register_chip(int idx)
+{
+	struct property_entry properties[GPIO_MOCKUP_MAX_PROP];
+	struct platform_device_info pdevinfo;
+	struct platform_device *pdev;
+	char **line_names = NULL;
+	char chip_label[32];
+	int prop = 0, base;
+	u16 ngpio;
+
+	memset(properties, 0, sizeof(properties));
+	memset(&pdevinfo, 0, sizeof(pdevinfo));
+
+	snprintf(chip_label, sizeof(chip_label), "gpio-mockup-%c", idx + 'A');
+	properties[prop++] = PROPERTY_ENTRY_STRING("chip-label", chip_label);
+
+	base = gpio_mockup_range_base(idx);
+	if (base >= 0)
+		properties[prop++] = PROPERTY_ENTRY_U32("gpio-base", base);
+
+	ngpio = base < 0 ? gpio_mockup_range_ngpio(idx)
+			 : gpio_mockup_range_ngpio(idx) - base;
+	properties[prop++] = PROPERTY_ENTRY_U16("nr-gpios", ngpio);
+
+	if (gpio_mockup_named_lines) {
+		line_names = gpio_mockup_make_line_names(chip_label, ngpio);
+		if (!line_names)
+			return -ENOMEM;
+
+		properties[prop++] = PROPERTY_ENTRY_STRING_ARRAY_LEN(
+					"gpio-line-names", line_names, ngpio);
+	}
+
+	pdevinfo.name = "gpio-mockup";
+	pdevinfo.id = idx;
+	pdevinfo.properties = properties;
+
+	pdev = platform_device_register_full(&pdevinfo);
+	kfree_strarray(line_names, ngpio);
+	if (IS_ERR(pdev)) {
+		pr_err("error registering device");
+		return PTR_ERR(pdev);
+	}
+
+	gpio_mockup_pdevs[idx] = pdev;
+
+	return 0;
+}
+
+static int __init gpio_mockup_init(void)
+{
+	int i, num_chips, err;
+
+	if ((gpio_mockup_num_ranges < 2) ||
+	    (gpio_mockup_num_ranges % 2) ||
+	    (gpio_mockup_num_ranges > GPIO_MOCKUP_MAX_RANGES))
+		return -EINVAL;
+
+	/* Each chip is described by two values. */
+	num_chips = gpio_mockup_num_ranges / 2;
+
+	/*
+	 * The second value in the <base GPIO - number of GPIOS> pair must
+	 * always be greater than 0.
+	 */
+	for (i = 0; i < num_chips; i++) {
+		if (gpio_mockup_range_ngpio(i) < 0)
+			return -EINVAL;
+	}
+
+	gpio_mockup_dbg_dir = debugfs_create_dir("gpio-mockup", NULL);
+
+	err = platform_driver_register(&gpio_mockup_driver);
+	if (err) {
+		pr_err("error registering platform driver\n");
+		debugfs_remove_recursive(gpio_mockup_dbg_dir);
+		return err;
+	}
+
+	for (i = 0; i < num_chips; i++) {
+		err = gpio_mockup_register_chip(i);
+		if (err) {
+			platform_driver_unregister(&gpio_mockup_driver);
+			gpio_mockup_unregister_pdevs();
+			debugfs_remove_recursive(gpio_mockup_dbg_dir);
+			return err;
+		}
+	}
+
+	return 0;
+}
+
+static void __exit gpio_mockup_exit(void)
+{
+	gpio_mockup_unregister_pdevs();
+	debugfs_remove_recursive(gpio_mockup_dbg_dir);
+	platform_driver_unregister(&gpio_mockup_driver);
+}
+
+module_init(gpio_mockup_init);
+module_exit(gpio_mockup_exit);
+
+MODULE_AUTHOR("Kamlakant Patel <kamlakant.patel@broadcom.com>");
+MODULE_AUTHOR("Bamvor Jian Zhang <bamv2005@gmail.com>");
+MODULE_AUTHOR("Bartosz Golaszewski <brgl@bgdev.pl>");
+MODULE_DESCRIPTION("GPIO Testing driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-moxtet.c b/drivers/gpio/gpio-moxtet.c
new file mode 100644
index 000000000..829990931
--- /dev/null
+++ b/drivers/gpio/gpio-moxtet.c
@@ -0,0 +1,179 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  Turris Mox Moxtet GPIO expander
+ *
+ *  Copyright (C) 2018 Marek Behun <marek.behun@nic.cz>
+ */
+
+#include <linux/bitops.h>
+#include <linux/gpio/driver.h>
+#include <linux/moxtet.h>
+#include <linux/module.h>
+
+#define MOXTET_GPIO_NGPIOS	12
+#define MOXTET_GPIO_INPUTS	4
+
+struct moxtet_gpio_desc {
+	u16 in_mask;
+	u16 out_mask;
+};
+
+static const struct moxtet_gpio_desc descs[] = {
+	[TURRIS_MOX_MODULE_SFP] = {
+		.in_mask = GENMASK(2, 0),
+		.out_mask = GENMASK(5, 4),
+	},
+};
+
+struct moxtet_gpio_chip {
+	struct device			*dev;
+	struct gpio_chip		gpio_chip;
+	const struct moxtet_gpio_desc	*desc;
+};
+
+static int moxtet_gpio_get_value(struct gpio_chip *gc, unsigned int offset)
+{
+	struct moxtet_gpio_chip *chip = gpiochip_get_data(gc);
+	int ret;
+
+	if (chip->desc->in_mask & BIT(offset)) {
+		ret = moxtet_device_read(chip->dev);
+	} else if (chip->desc->out_mask & BIT(offset)) {
+		ret = moxtet_device_written(chip->dev);
+		if (ret >= 0)
+			ret <<= MOXTET_GPIO_INPUTS;
+	} else {
+		return -EINVAL;
+	}
+
+	if (ret < 0)
+		return ret;
+
+	return !!(ret & BIT(offset));
+}
+
+static void moxtet_gpio_set_value(struct gpio_chip *gc, unsigned int offset,
+				  int val)
+{
+	struct moxtet_gpio_chip *chip = gpiochip_get_data(gc);
+	int state;
+
+	state = moxtet_device_written(chip->dev);
+	if (state < 0)
+		return;
+
+	offset -= MOXTET_GPIO_INPUTS;
+
+	if (val)
+		state |= BIT(offset);
+	else
+		state &= ~BIT(offset);
+
+	moxtet_device_write(chip->dev, state);
+}
+
+static int moxtet_gpio_get_direction(struct gpio_chip *gc, unsigned int offset)
+{
+	struct moxtet_gpio_chip *chip = gpiochip_get_data(gc);
+
+	/* All lines are hard wired to be either input or output, not both. */
+	if (chip->desc->in_mask & BIT(offset))
+		return GPIO_LINE_DIRECTION_IN;
+	else if (chip->desc->out_mask & BIT(offset))
+		return GPIO_LINE_DIRECTION_OUT;
+	else
+		return -EINVAL;
+}
+
+static int moxtet_gpio_direction_input(struct gpio_chip *gc,
+				       unsigned int offset)
+{
+	struct moxtet_gpio_chip *chip = gpiochip_get_data(gc);
+
+	if (chip->desc->in_mask & BIT(offset))
+		return 0;
+	else if (chip->desc->out_mask & BIT(offset))
+		return -ENOTSUPP;
+	else
+		return -EINVAL;
+}
+
+static int moxtet_gpio_direction_output(struct gpio_chip *gc,
+					unsigned int offset, int val)
+{
+	struct moxtet_gpio_chip *chip = gpiochip_get_data(gc);
+
+	if (chip->desc->out_mask & BIT(offset))
+		moxtet_gpio_set_value(gc, offset, val);
+	else if (chip->desc->in_mask & BIT(offset))
+		return -ENOTSUPP;
+	else
+		return -EINVAL;
+
+	return 0;
+}
+
+static int moxtet_gpio_probe(struct device *dev)
+{
+	struct moxtet_gpio_chip *chip;
+	struct device_node *nc = dev->of_node;
+	int id;
+
+	id = to_moxtet_device(dev)->id;
+
+	if (id >= ARRAY_SIZE(descs)) {
+		dev_err(dev, "%pOF Moxtet device id 0x%x is not supported by gpio-moxtet driver\n",
+			nc, id);
+		return -ENOTSUPP;
+	}
+
+	chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	chip->dev = dev;
+	chip->gpio_chip.parent = dev;
+	chip->desc = &descs[id];
+
+	dev_set_drvdata(dev, chip);
+
+	chip->gpio_chip.label = dev_name(dev);
+	chip->gpio_chip.get_direction = moxtet_gpio_get_direction;
+	chip->gpio_chip.direction_input = moxtet_gpio_direction_input;
+	chip->gpio_chip.direction_output = moxtet_gpio_direction_output;
+	chip->gpio_chip.get = moxtet_gpio_get_value;
+	chip->gpio_chip.set = moxtet_gpio_set_value;
+	chip->gpio_chip.base = -1;
+
+	chip->gpio_chip.ngpio = MOXTET_GPIO_NGPIOS;
+
+	chip->gpio_chip.can_sleep = true;
+	chip->gpio_chip.owner = THIS_MODULE;
+
+	return devm_gpiochip_add_data(dev, &chip->gpio_chip, chip);
+}
+
+static const struct of_device_id moxtet_gpio_dt_ids[] = {
+	{ .compatible = "cznic,moxtet-gpio", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, moxtet_gpio_dt_ids);
+
+static const enum turris_mox_module_id moxtet_gpio_module_table[] = {
+	TURRIS_MOX_MODULE_SFP,
+	0,
+};
+
+static struct moxtet_driver moxtet_gpio_driver = {
+	.driver = {
+		.name		= "moxtet-gpio",
+		.of_match_table	= moxtet_gpio_dt_ids,
+		.probe		= moxtet_gpio_probe,
+	},
+	.id_table = moxtet_gpio_module_table,
+};
+module_moxtet_driver(moxtet_gpio_driver);
+
+MODULE_AUTHOR("Marek Behun <marek.behun@nic.cz>");
+MODULE_DESCRIPTION("Turris Mox Moxtet GPIO expander");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-mpc5200.c b/drivers/gpio/gpio-mpc5200.c
new file mode 100644
index 000000000..000494e0c
--- /dev/null
+++ b/drivers/gpio/gpio-mpc5200.c
@@ -0,0 +1,366 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * MPC52xx gpio driver
+ *
+ * Copyright (c) 2008 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ */
+
+#include <linux/of.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/of_gpio.h>
+#include <linux/io.h>
+#include <linux/of_platform.h>
+#include <linux/module.h>
+
+#include <asm/mpc52xx.h>
+#include <sysdev/fsl_soc.h>
+
+static DEFINE_SPINLOCK(gpio_lock);
+
+struct mpc52xx_gpiochip {
+	struct of_mm_gpio_chip mmchip;
+	unsigned int shadow_dvo;
+	unsigned int shadow_gpioe;
+	unsigned int shadow_ddr;
+};
+
+/*
+ * GPIO LIB API implementation for wakeup GPIOs.
+ *
+ * There's a maximum of 8 wakeup GPIOs. Which of these are available
+ * for use depends on your board setup.
+ *
+ * 0 -> GPIO_WKUP_7
+ * 1 -> GPIO_WKUP_6
+ * 2 -> PSC6_1
+ * 3 -> PSC6_0
+ * 4 -> ETH_17
+ * 5 -> PSC3_9
+ * 6 -> PSC2_4
+ * 7 -> PSC1_4
+ *
+ */
+static int mpc52xx_wkup_gpio_get(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct mpc52xx_gpio_wkup __iomem *regs = mm_gc->regs;
+	unsigned int ret;
+
+	ret = (in_8(&regs->wkup_ival) >> (7 - gpio)) & 1;
+
+	pr_debug("%s: gpio: %d ret: %d\n", __func__, gpio, ret);
+
+	return ret;
+}
+
+static inline void
+__mpc52xx_wkup_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct mpc52xx_gpiochip *chip = gpiochip_get_data(gc);
+	struct mpc52xx_gpio_wkup __iomem *regs = mm_gc->regs;
+
+	if (val)
+		chip->shadow_dvo |= 1 << (7 - gpio);
+	else
+		chip->shadow_dvo &= ~(1 << (7 - gpio));
+
+	out_8(&regs->wkup_dvo, chip->shadow_dvo);
+}
+
+static void
+mpc52xx_wkup_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&gpio_lock, flags);
+
+	__mpc52xx_wkup_gpio_set(gc, gpio, val);
+
+	spin_unlock_irqrestore(&gpio_lock, flags);
+
+	pr_debug("%s: gpio: %d val: %d\n", __func__, gpio, val);
+}
+
+static int mpc52xx_wkup_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct mpc52xx_gpiochip *chip = gpiochip_get_data(gc);
+	struct mpc52xx_gpio_wkup __iomem *regs = mm_gc->regs;
+	unsigned long flags;
+
+	spin_lock_irqsave(&gpio_lock, flags);
+
+	/* set the direction */
+	chip->shadow_ddr &= ~(1 << (7 - gpio));
+	out_8(&regs->wkup_ddr, chip->shadow_ddr);
+
+	/* and enable the pin */
+	chip->shadow_gpioe |= 1 << (7 - gpio);
+	out_8(&regs->wkup_gpioe, chip->shadow_gpioe);
+
+	spin_unlock_irqrestore(&gpio_lock, flags);
+
+	return 0;
+}
+
+static int
+mpc52xx_wkup_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct mpc52xx_gpio_wkup __iomem *regs = mm_gc->regs;
+	struct mpc52xx_gpiochip *chip = gpiochip_get_data(gc);
+	unsigned long flags;
+
+	spin_lock_irqsave(&gpio_lock, flags);
+
+	__mpc52xx_wkup_gpio_set(gc, gpio, val);
+
+	/* Then set direction */
+	chip->shadow_ddr |= 1 << (7 - gpio);
+	out_8(&regs->wkup_ddr, chip->shadow_ddr);
+
+	/* Finally enable the pin */
+	chip->shadow_gpioe |= 1 << (7 - gpio);
+	out_8(&regs->wkup_gpioe, chip->shadow_gpioe);
+
+	spin_unlock_irqrestore(&gpio_lock, flags);
+
+	pr_debug("%s: gpio: %d val: %d\n", __func__, gpio, val);
+
+	return 0;
+}
+
+static int mpc52xx_wkup_gpiochip_probe(struct platform_device *ofdev)
+{
+	struct mpc52xx_gpiochip *chip;
+	struct mpc52xx_gpio_wkup __iomem *regs;
+	struct gpio_chip *gc;
+	int ret;
+
+	chip = devm_kzalloc(&ofdev->dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	platform_set_drvdata(ofdev, chip);
+
+	gc = &chip->mmchip.gc;
+
+	gc->ngpio            = 8;
+	gc->direction_input  = mpc52xx_wkup_gpio_dir_in;
+	gc->direction_output = mpc52xx_wkup_gpio_dir_out;
+	gc->get              = mpc52xx_wkup_gpio_get;
+	gc->set              = mpc52xx_wkup_gpio_set;
+
+	ret = of_mm_gpiochip_add_data(ofdev->dev.of_node, &chip->mmchip, chip);
+	if (ret)
+		return ret;
+
+	regs = chip->mmchip.regs;
+	chip->shadow_gpioe = in_8(&regs->wkup_gpioe);
+	chip->shadow_ddr = in_8(&regs->wkup_ddr);
+	chip->shadow_dvo = in_8(&regs->wkup_dvo);
+
+	return 0;
+}
+
+static int mpc52xx_gpiochip_remove(struct platform_device *ofdev)
+{
+	struct mpc52xx_gpiochip *chip = platform_get_drvdata(ofdev);
+
+	of_mm_gpiochip_remove(&chip->mmchip);
+
+	return 0;
+}
+
+static const struct of_device_id mpc52xx_wkup_gpiochip_match[] = {
+	{ .compatible = "fsl,mpc5200-gpio-wkup", },
+	{}
+};
+
+static struct platform_driver mpc52xx_wkup_gpiochip_driver = {
+	.driver = {
+		.name = "mpc5200-gpio-wkup",
+		.of_match_table = mpc52xx_wkup_gpiochip_match,
+	},
+	.probe = mpc52xx_wkup_gpiochip_probe,
+	.remove = mpc52xx_gpiochip_remove,
+};
+
+/*
+ * GPIO LIB API implementation for simple GPIOs
+ *
+ * There's a maximum of 32 simple GPIOs. Which of these are available
+ * for use depends on your board setup.
+ * The numbering reflects the bit numbering in the port registers:
+ *
+ *  0..1  > reserved
+ *  2..3  > IRDA
+ *  4..7  > ETHR
+ *  8..11 > reserved
+ * 12..15 > USB
+ * 16..17 > reserved
+ * 18..23 > PSC3
+ * 24..27 > PSC2
+ * 28..31 > PSC1
+ */
+static int mpc52xx_simple_gpio_get(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct mpc52xx_gpio __iomem *regs = mm_gc->regs;
+	unsigned int ret;
+
+	ret = (in_be32(&regs->simple_ival) >> (31 - gpio)) & 1;
+
+	return ret;
+}
+
+static inline void
+__mpc52xx_simple_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct mpc52xx_gpiochip *chip = gpiochip_get_data(gc);
+	struct mpc52xx_gpio __iomem *regs = mm_gc->regs;
+
+	if (val)
+		chip->shadow_dvo |= 1 << (31 - gpio);
+	else
+		chip->shadow_dvo &= ~(1 << (31 - gpio));
+	out_be32(&regs->simple_dvo, chip->shadow_dvo);
+}
+
+static void
+mpc52xx_simple_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&gpio_lock, flags);
+
+	__mpc52xx_simple_gpio_set(gc, gpio, val);
+
+	spin_unlock_irqrestore(&gpio_lock, flags);
+
+	pr_debug("%s: gpio: %d val: %d\n", __func__, gpio, val);
+}
+
+static int mpc52xx_simple_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct mpc52xx_gpiochip *chip = gpiochip_get_data(gc);
+	struct mpc52xx_gpio __iomem *regs = mm_gc->regs;
+	unsigned long flags;
+
+	spin_lock_irqsave(&gpio_lock, flags);
+
+	/* set the direction */
+	chip->shadow_ddr &= ~(1 << (31 - gpio));
+	out_be32(&regs->simple_ddr, chip->shadow_ddr);
+
+	/* and enable the pin */
+	chip->shadow_gpioe |= 1 << (31 - gpio);
+	out_be32(&regs->simple_gpioe, chip->shadow_gpioe);
+
+	spin_unlock_irqrestore(&gpio_lock, flags);
+
+	return 0;
+}
+
+static int
+mpc52xx_simple_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct mpc52xx_gpiochip *chip = gpiochip_get_data(gc);
+	struct mpc52xx_gpio __iomem *regs = mm_gc->regs;
+	unsigned long flags;
+
+	spin_lock_irqsave(&gpio_lock, flags);
+
+	/* First set initial value */
+	__mpc52xx_simple_gpio_set(gc, gpio, val);
+
+	/* Then set direction */
+	chip->shadow_ddr |= 1 << (31 - gpio);
+	out_be32(&regs->simple_ddr, chip->shadow_ddr);
+
+	/* Finally enable the pin */
+	chip->shadow_gpioe |= 1 << (31 - gpio);
+	out_be32(&regs->simple_gpioe, chip->shadow_gpioe);
+
+	spin_unlock_irqrestore(&gpio_lock, flags);
+
+	pr_debug("%s: gpio: %d val: %d\n", __func__, gpio, val);
+
+	return 0;
+}
+
+static int mpc52xx_simple_gpiochip_probe(struct platform_device *ofdev)
+{
+	struct mpc52xx_gpiochip *chip;
+	struct gpio_chip *gc;
+	struct mpc52xx_gpio __iomem *regs;
+	int ret;
+
+	chip = devm_kzalloc(&ofdev->dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	platform_set_drvdata(ofdev, chip);
+
+	gc = &chip->mmchip.gc;
+
+	gc->ngpio            = 32;
+	gc->direction_input  = mpc52xx_simple_gpio_dir_in;
+	gc->direction_output = mpc52xx_simple_gpio_dir_out;
+	gc->get              = mpc52xx_simple_gpio_get;
+	gc->set              = mpc52xx_simple_gpio_set;
+
+	ret = of_mm_gpiochip_add_data(ofdev->dev.of_node, &chip->mmchip, chip);
+	if (ret)
+		return ret;
+
+	regs = chip->mmchip.regs;
+	chip->shadow_gpioe = in_be32(&regs->simple_gpioe);
+	chip->shadow_ddr = in_be32(&regs->simple_ddr);
+	chip->shadow_dvo = in_be32(&regs->simple_dvo);
+
+	return 0;
+}
+
+static const struct of_device_id mpc52xx_simple_gpiochip_match[] = {
+	{ .compatible = "fsl,mpc5200-gpio", },
+	{}
+};
+
+static struct platform_driver mpc52xx_simple_gpiochip_driver = {
+	.driver = {
+		.name = "mpc5200-gpio",
+		.of_match_table = mpc52xx_simple_gpiochip_match,
+	},
+	.probe = mpc52xx_simple_gpiochip_probe,
+	.remove = mpc52xx_gpiochip_remove,
+};
+
+static struct platform_driver * const drivers[] = {
+	&mpc52xx_wkup_gpiochip_driver,
+	&mpc52xx_simple_gpiochip_driver,
+};
+
+static int __init mpc52xx_gpio_init(void)
+{
+	return platform_register_drivers(drivers, ARRAY_SIZE(drivers));
+}
+
+/* Make sure we get initialised before anyone else tries to use us */
+subsys_initcall(mpc52xx_gpio_init);
+
+static void __exit mpc52xx_gpio_exit(void)
+{
+	platform_unregister_drivers(drivers, ARRAY_SIZE(drivers));
+}
+module_exit(mpc52xx_gpio_exit);
+
+MODULE_DESCRIPTION("Freescale MPC52xx gpio driver");
+MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de");
+MODULE_LICENSE("GPL v2");
+
diff --git a/drivers/gpio/gpio-mpc8xxx.c b/drivers/gpio/gpio-mpc8xxx.c
new file mode 100644
index 000000000..60c2533a3
--- /dev/null
+++ b/drivers/gpio/gpio-mpc8xxx.c
@@ -0,0 +1,444 @@
+/*
+ * GPIOs on MPC512x/8349/8572/8610/QorIQ and compatible
+ *
+ * Copyright (C) 2008 Peter Korsgaard <jacmet@sunsite.dk>
+ * Copyright (C) 2016 Freescale Semiconductor Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/slab.h>
+#include <linux/irq.h>
+#include <linux/gpio/driver.h>
+#include <linux/bitops.h>
+#include <linux/interrupt.h>
+
+#define MPC8XXX_GPIO_PINS	32
+
+#define GPIO_DIR		0x00
+#define GPIO_ODR		0x04
+#define GPIO_DAT		0x08
+#define GPIO_IER		0x0c
+#define GPIO_IMR		0x10
+#define GPIO_ICR		0x14
+#define GPIO_ICR2		0x18
+#define GPIO_IBE		0x18
+
+struct mpc8xxx_gpio_chip {
+	struct gpio_chip	gc;
+	void __iomem *regs;
+	raw_spinlock_t lock;
+
+	int (*direction_output)(struct gpio_chip *chip,
+				unsigned offset, int value);
+
+	struct irq_domain *irq;
+	unsigned int irqn;
+};
+
+/*
+ * This hardware has a big endian bit assignment such that GPIO line 0 is
+ * connected to bit 31, line 1 to bit 30 ... line 31 to bit 0.
+ * This inline helper give the right bitmask for a certain line.
+ */
+static inline u32 mpc_pin2mask(unsigned int offset)
+{
+	return BIT(31 - offset);
+}
+
+/* Workaround GPIO 1 errata on MPC8572/MPC8536. The status of GPIOs
+ * defined as output cannot be determined by reading GPDAT register,
+ * so we use shadow data register instead. The status of input pins
+ * is determined by reading GPDAT register.
+ */
+static int mpc8572_gpio_get(struct gpio_chip *gc, unsigned int gpio)
+{
+	u32 val;
+	struct mpc8xxx_gpio_chip *mpc8xxx_gc = gpiochip_get_data(gc);
+	u32 out_mask, out_shadow;
+
+	out_mask = gc->read_reg(mpc8xxx_gc->regs + GPIO_DIR);
+	val = gc->read_reg(mpc8xxx_gc->regs + GPIO_DAT) & ~out_mask;
+	out_shadow = gc->bgpio_data & out_mask;
+
+	return !!((val | out_shadow) & mpc_pin2mask(gpio));
+}
+
+static int mpc5121_gpio_dir_out(struct gpio_chip *gc,
+				unsigned int gpio, int val)
+{
+	struct mpc8xxx_gpio_chip *mpc8xxx_gc = gpiochip_get_data(gc);
+	/* GPIO 28..31 are input only on MPC5121 */
+	if (gpio >= 28)
+		return -EINVAL;
+
+	return mpc8xxx_gc->direction_output(gc, gpio, val);
+}
+
+static int mpc5125_gpio_dir_out(struct gpio_chip *gc,
+				unsigned int gpio, int val)
+{
+	struct mpc8xxx_gpio_chip *mpc8xxx_gc = gpiochip_get_data(gc);
+	/* GPIO 0..3 are input only on MPC5125 */
+	if (gpio <= 3)
+		return -EINVAL;
+
+	return mpc8xxx_gc->direction_output(gc, gpio, val);
+}
+
+static int mpc8xxx_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
+{
+	struct mpc8xxx_gpio_chip *mpc8xxx_gc = gpiochip_get_data(gc);
+
+	if (mpc8xxx_gc->irq && offset < MPC8XXX_GPIO_PINS)
+		return irq_create_mapping(mpc8xxx_gc->irq, offset);
+	else
+		return -ENXIO;
+}
+
+static irqreturn_t mpc8xxx_gpio_irq_cascade(int irq, void *data)
+{
+	struct mpc8xxx_gpio_chip *mpc8xxx_gc = data;
+	struct gpio_chip *gc = &mpc8xxx_gc->gc;
+	unsigned long mask;
+	int i;
+
+	mask = gc->read_reg(mpc8xxx_gc->regs + GPIO_IER)
+		& gc->read_reg(mpc8xxx_gc->regs + GPIO_IMR);
+	for_each_set_bit(i, &mask, 32)
+		generic_handle_irq(irq_linear_revmap(mpc8xxx_gc->irq, 31 - i));
+
+	return IRQ_HANDLED;
+}
+
+static void mpc8xxx_irq_unmask(struct irq_data *d)
+{
+	struct mpc8xxx_gpio_chip *mpc8xxx_gc = irq_data_get_irq_chip_data(d);
+	struct gpio_chip *gc = &mpc8xxx_gc->gc;
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
+
+	gc->write_reg(mpc8xxx_gc->regs + GPIO_IMR,
+		gc->read_reg(mpc8xxx_gc->regs + GPIO_IMR)
+		| mpc_pin2mask(irqd_to_hwirq(d)));
+
+	raw_spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
+}
+
+static void mpc8xxx_irq_mask(struct irq_data *d)
+{
+	struct mpc8xxx_gpio_chip *mpc8xxx_gc = irq_data_get_irq_chip_data(d);
+	struct gpio_chip *gc = &mpc8xxx_gc->gc;
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
+
+	gc->write_reg(mpc8xxx_gc->regs + GPIO_IMR,
+		gc->read_reg(mpc8xxx_gc->regs + GPIO_IMR)
+		& ~mpc_pin2mask(irqd_to_hwirq(d)));
+
+	raw_spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
+}
+
+static void mpc8xxx_irq_ack(struct irq_data *d)
+{
+	struct mpc8xxx_gpio_chip *mpc8xxx_gc = irq_data_get_irq_chip_data(d);
+	struct gpio_chip *gc = &mpc8xxx_gc->gc;
+
+	gc->write_reg(mpc8xxx_gc->regs + GPIO_IER,
+		      mpc_pin2mask(irqd_to_hwirq(d)));
+}
+
+static int mpc8xxx_irq_set_type(struct irq_data *d, unsigned int flow_type)
+{
+	struct mpc8xxx_gpio_chip *mpc8xxx_gc = irq_data_get_irq_chip_data(d);
+	struct gpio_chip *gc = &mpc8xxx_gc->gc;
+	unsigned long flags;
+
+	switch (flow_type) {
+	case IRQ_TYPE_EDGE_FALLING:
+	case IRQ_TYPE_LEVEL_LOW:
+		raw_spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
+		gc->write_reg(mpc8xxx_gc->regs + GPIO_ICR,
+			gc->read_reg(mpc8xxx_gc->regs + GPIO_ICR)
+			| mpc_pin2mask(irqd_to_hwirq(d)));
+		raw_spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
+		break;
+
+	case IRQ_TYPE_EDGE_BOTH:
+		raw_spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
+		gc->write_reg(mpc8xxx_gc->regs + GPIO_ICR,
+			gc->read_reg(mpc8xxx_gc->regs + GPIO_ICR)
+			& ~mpc_pin2mask(irqd_to_hwirq(d)));
+		raw_spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int mpc512x_irq_set_type(struct irq_data *d, unsigned int flow_type)
+{
+	struct mpc8xxx_gpio_chip *mpc8xxx_gc = irq_data_get_irq_chip_data(d);
+	struct gpio_chip *gc = &mpc8xxx_gc->gc;
+	unsigned long gpio = irqd_to_hwirq(d);
+	void __iomem *reg;
+	unsigned int shift;
+	unsigned long flags;
+
+	if (gpio < 16) {
+		reg = mpc8xxx_gc->regs + GPIO_ICR;
+		shift = (15 - gpio) * 2;
+	} else {
+		reg = mpc8xxx_gc->regs + GPIO_ICR2;
+		shift = (15 - (gpio % 16)) * 2;
+	}
+
+	switch (flow_type) {
+	case IRQ_TYPE_EDGE_FALLING:
+	case IRQ_TYPE_LEVEL_LOW:
+		raw_spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
+		gc->write_reg(reg, (gc->read_reg(reg) & ~(3 << shift))
+			| (2 << shift));
+		raw_spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
+		break;
+
+	case IRQ_TYPE_EDGE_RISING:
+	case IRQ_TYPE_LEVEL_HIGH:
+		raw_spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
+		gc->write_reg(reg, (gc->read_reg(reg) & ~(3 << shift))
+			| (1 << shift));
+		raw_spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
+		break;
+
+	case IRQ_TYPE_EDGE_BOTH:
+		raw_spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
+		gc->write_reg(reg, (gc->read_reg(reg) & ~(3 << shift)));
+		raw_spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct irq_chip mpc8xxx_irq_chip = {
+	.name		= "mpc8xxx-gpio",
+	.irq_unmask	= mpc8xxx_irq_unmask,
+	.irq_mask	= mpc8xxx_irq_mask,
+	.irq_ack	= mpc8xxx_irq_ack,
+	/* this might get overwritten in mpc8xxx_probe() */
+	.irq_set_type	= mpc8xxx_irq_set_type,
+};
+
+static int mpc8xxx_gpio_irq_map(struct irq_domain *h, unsigned int irq,
+				irq_hw_number_t hwirq)
+{
+	irq_set_chip_data(irq, h->host_data);
+	irq_set_chip_and_handler(irq, &mpc8xxx_irq_chip, handle_edge_irq);
+
+	return 0;
+}
+
+static const struct irq_domain_ops mpc8xxx_gpio_irq_ops = {
+	.map	= mpc8xxx_gpio_irq_map,
+	.xlate	= irq_domain_xlate_twocell,
+};
+
+struct mpc8xxx_gpio_devtype {
+	int (*gpio_dir_out)(struct gpio_chip *, unsigned int, int);
+	int (*gpio_get)(struct gpio_chip *, unsigned int);
+	int (*irq_set_type)(struct irq_data *, unsigned int);
+};
+
+static const struct mpc8xxx_gpio_devtype mpc512x_gpio_devtype = {
+	.gpio_dir_out = mpc5121_gpio_dir_out,
+	.irq_set_type = mpc512x_irq_set_type,
+};
+
+static const struct mpc8xxx_gpio_devtype mpc5125_gpio_devtype = {
+	.gpio_dir_out = mpc5125_gpio_dir_out,
+	.irq_set_type = mpc512x_irq_set_type,
+};
+
+static const struct mpc8xxx_gpio_devtype mpc8572_gpio_devtype = {
+	.gpio_get = mpc8572_gpio_get,
+};
+
+static const struct mpc8xxx_gpio_devtype mpc8xxx_gpio_devtype_default = {
+	.irq_set_type = mpc8xxx_irq_set_type,
+};
+
+static const struct of_device_id mpc8xxx_gpio_ids[] = {
+	{ .compatible = "fsl,mpc8349-gpio", },
+	{ .compatible = "fsl,mpc8572-gpio", .data = &mpc8572_gpio_devtype, },
+	{ .compatible = "fsl,mpc8610-gpio", },
+	{ .compatible = "fsl,mpc5121-gpio", .data = &mpc512x_gpio_devtype, },
+	{ .compatible = "fsl,mpc5125-gpio", .data = &mpc5125_gpio_devtype, },
+	{ .compatible = "fsl,pq3-gpio",     },
+	{ .compatible = "fsl,ls1028a-gpio", },
+	{ .compatible = "fsl,ls1088a-gpio", },
+	{ .compatible = "fsl,qoriq-gpio",   },
+	{}
+};
+
+static int mpc8xxx_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct mpc8xxx_gpio_chip *mpc8xxx_gc;
+	struct gpio_chip	*gc;
+	const struct mpc8xxx_gpio_devtype *devtype =
+		of_device_get_match_data(&pdev->dev);
+	int ret;
+
+	mpc8xxx_gc = devm_kzalloc(&pdev->dev, sizeof(*mpc8xxx_gc), GFP_KERNEL);
+	if (!mpc8xxx_gc)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, mpc8xxx_gc);
+
+	raw_spin_lock_init(&mpc8xxx_gc->lock);
+
+	mpc8xxx_gc->regs = of_iomap(np, 0);
+	if (!mpc8xxx_gc->regs)
+		return -ENOMEM;
+
+	gc = &mpc8xxx_gc->gc;
+	gc->parent = &pdev->dev;
+
+	if (of_property_read_bool(np, "little-endian")) {
+		ret = bgpio_init(gc, &pdev->dev, 4,
+				 mpc8xxx_gc->regs + GPIO_DAT,
+				 NULL, NULL,
+				 mpc8xxx_gc->regs + GPIO_DIR, NULL,
+				 BGPIOF_BIG_ENDIAN);
+		if (ret)
+			goto err;
+		dev_dbg(&pdev->dev, "GPIO registers are LITTLE endian\n");
+	} else {
+		ret = bgpio_init(gc, &pdev->dev, 4,
+				 mpc8xxx_gc->regs + GPIO_DAT,
+				 NULL, NULL,
+				 mpc8xxx_gc->regs + GPIO_DIR, NULL,
+				 BGPIOF_BIG_ENDIAN
+				 | BGPIOF_BIG_ENDIAN_BYTE_ORDER);
+		if (ret)
+			goto err;
+		dev_dbg(&pdev->dev, "GPIO registers are BIG endian\n");
+	}
+
+	mpc8xxx_gc->direction_output = gc->direction_output;
+
+	if (!devtype)
+		devtype = &mpc8xxx_gpio_devtype_default;
+
+	/*
+	 * It's assumed that only a single type of gpio controller is available
+	 * on the current machine, so overwriting global data is fine.
+	 */
+	if (devtype->irq_set_type)
+		mpc8xxx_irq_chip.irq_set_type = devtype->irq_set_type;
+
+	if (devtype->gpio_dir_out)
+		gc->direction_output = devtype->gpio_dir_out;
+	if (devtype->gpio_get)
+		gc->get = devtype->gpio_get;
+
+	gc->to_irq = mpc8xxx_gpio_to_irq;
+
+	/*
+	 * The GPIO Input Buffer Enable register(GPIO_IBE) is used to control
+	 * the input enable of each individual GPIO port.  When an individual
+	 * GPIO port’s direction is set to input (GPIO_GPDIR[DRn=0]), the
+	 * associated input enable must be set (GPIOxGPIE[IEn]=1) to propagate
+	 * the port value to the GPIO Data Register.
+	 */
+	if (of_device_is_compatible(np, "fsl,qoriq-gpio") ||
+	    of_device_is_compatible(np, "fsl,ls1028a-gpio") ||
+	    of_device_is_compatible(np, "fsl,ls1088a-gpio"))
+		gc->write_reg(mpc8xxx_gc->regs + GPIO_IBE, 0xffffffff);
+
+	ret = devm_gpiochip_add_data(&pdev->dev, gc, mpc8xxx_gc);
+	if (ret) {
+		pr_err("%pOF: GPIO chip registration failed with status %d\n",
+		       np, ret);
+		goto err;
+	}
+
+	mpc8xxx_gc->irqn = irq_of_parse_and_map(np, 0);
+	if (!mpc8xxx_gc->irqn)
+		return 0;
+
+	mpc8xxx_gc->irq = irq_domain_add_linear(np, MPC8XXX_GPIO_PINS,
+					&mpc8xxx_gpio_irq_ops, mpc8xxx_gc);
+	if (!mpc8xxx_gc->irq)
+		return 0;
+
+	/* ack and mask all irqs */
+	gc->write_reg(mpc8xxx_gc->regs + GPIO_IER, 0xffffffff);
+	gc->write_reg(mpc8xxx_gc->regs + GPIO_IMR, 0);
+
+	ret = devm_request_irq(&pdev->dev, mpc8xxx_gc->irqn,
+			       mpc8xxx_gpio_irq_cascade,
+			       IRQF_NO_THREAD | IRQF_SHARED, "gpio-cascade",
+			       mpc8xxx_gc);
+	if (ret) {
+		dev_err(&pdev->dev, "%s: failed to devm_request_irq(%d), ret = %d\n",
+			np->full_name, mpc8xxx_gc->irqn, ret);
+		goto err;
+	}
+
+	return 0;
+err:
+	if (mpc8xxx_gc->irq)
+		irq_domain_remove(mpc8xxx_gc->irq);
+	iounmap(mpc8xxx_gc->regs);
+	return ret;
+}
+
+static int mpc8xxx_remove(struct platform_device *pdev)
+{
+	struct mpc8xxx_gpio_chip *mpc8xxx_gc = platform_get_drvdata(pdev);
+
+	if (mpc8xxx_gc->irq) {
+		irq_set_chained_handler_and_data(mpc8xxx_gc->irqn, NULL, NULL);
+		irq_domain_remove(mpc8xxx_gc->irq);
+	}
+
+	iounmap(mpc8xxx_gc->regs);
+
+	return 0;
+}
+
+static struct platform_driver mpc8xxx_plat_driver = {
+	.probe		= mpc8xxx_probe,
+	.remove		= mpc8xxx_remove,
+	.driver		= {
+		.name = "gpio-mpc8xxx",
+		.of_match_table	= mpc8xxx_gpio_ids,
+	},
+};
+
+static int __init mpc8xxx_init(void)
+{
+	return platform_driver_register(&mpc8xxx_plat_driver);
+}
+
+arch_initcall(mpc8xxx_init);
diff --git a/drivers/gpio/gpio-msic.c b/drivers/gpio/gpio-msic.c
new file mode 100644
index 000000000..7e3c96e4a
--- /dev/null
+++ b/drivers/gpio/gpio-msic.c
@@ -0,0 +1,314 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Intel Medfield MSIC GPIO driver>
+ * Copyright (c) 2011, Intel Corporation.
+ *
+ * Author: Mathias Nyman <mathias.nyman@linux.intel.com>
+ * Based on intel_pmic_gpio.c
+ */
+
+#include <linux/gpio/driver.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mfd/intel_msic.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+/* the offset for the mapping of global gpio pin to irq */
+#define MSIC_GPIO_IRQ_OFFSET	0x100
+
+#define MSIC_GPIO_DIR_IN	0
+#define MSIC_GPIO_DIR_OUT	BIT(5)
+#define MSIC_GPIO_TRIG_FALL	BIT(1)
+#define MSIC_GPIO_TRIG_RISE	BIT(2)
+
+/* masks for msic gpio output GPIOxxxxCTLO registers */
+#define MSIC_GPIO_DIR_MASK	BIT(5)
+#define MSIC_GPIO_DRV_MASK	BIT(4)
+#define MSIC_GPIO_REN_MASK	BIT(3)
+#define MSIC_GPIO_RVAL_MASK	(BIT(2) | BIT(1))
+#define MSIC_GPIO_DOUT_MASK	BIT(0)
+
+/* masks for msic gpio input GPIOxxxxCTLI registers */
+#define MSIC_GPIO_GLBYP_MASK	BIT(5)
+#define MSIC_GPIO_DBNC_MASK	(BIT(4) | BIT(3))
+#define MSIC_GPIO_INTCNT_MASK	(BIT(2) | BIT(1))
+#define MSIC_GPIO_DIN_MASK	BIT(0)
+
+#define MSIC_NUM_GPIO		24
+
+struct msic_gpio {
+	struct platform_device	*pdev;
+	struct mutex		buslock;
+	struct gpio_chip	chip;
+	int			irq;
+	unsigned		irq_base;
+	unsigned long		trig_change_mask;
+	unsigned		trig_type;
+};
+
+/*
+ * MSIC has 24 gpios, 16 low voltage (1.2-1.8v) and 8 high voltage (3v).
+ * Both the high and low voltage gpios are divided in two banks.
+ * GPIOs are numbered with GPIO0LV0 as gpio_base in the following order:
+ * GPIO0LV0..GPIO0LV7: low voltage, bank 0, gpio_base
+ * GPIO1LV0..GPIO1LV7: low voltage, bank 1,  gpio_base + 8
+ * GPIO0HV0..GPIO0HV3: high voltage, bank 0, gpio_base + 16
+ * GPIO1HV0..GPIO1HV3: high voltage, bank 1, gpio_base + 20
+ */
+
+static int msic_gpio_to_ireg(unsigned offset)
+{
+	if (offset >= MSIC_NUM_GPIO)
+		return -EINVAL;
+
+	if (offset < 8)
+		return INTEL_MSIC_GPIO0LV0CTLI - offset;
+	if (offset < 16)
+		return INTEL_MSIC_GPIO1LV0CTLI - offset + 8;
+	if (offset < 20)
+		return INTEL_MSIC_GPIO0HV0CTLI - offset + 16;
+
+	return INTEL_MSIC_GPIO1HV0CTLI - offset + 20;
+}
+
+static int msic_gpio_to_oreg(unsigned offset)
+{
+	if (offset >= MSIC_NUM_GPIO)
+		return -EINVAL;
+
+	if (offset < 8)
+		return INTEL_MSIC_GPIO0LV0CTLO - offset;
+	if (offset < 16)
+		return INTEL_MSIC_GPIO1LV0CTLO - offset + 8;
+	if (offset < 20)
+		return INTEL_MSIC_GPIO0HV0CTLO - offset + 16;
+
+	return INTEL_MSIC_GPIO1HV0CTLO - offset + 20;
+}
+
+static int msic_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	int reg;
+
+	reg = msic_gpio_to_oreg(offset);
+	if (reg < 0)
+		return reg;
+
+	return intel_msic_reg_update(reg, MSIC_GPIO_DIR_IN, MSIC_GPIO_DIR_MASK);
+}
+
+static int msic_gpio_direction_output(struct gpio_chip *chip,
+			unsigned offset, int value)
+{
+	int reg;
+	unsigned mask;
+
+	value = (!!value) | MSIC_GPIO_DIR_OUT;
+	mask = MSIC_GPIO_DIR_MASK | MSIC_GPIO_DOUT_MASK;
+
+	reg = msic_gpio_to_oreg(offset);
+	if (reg < 0)
+		return reg;
+
+	return intel_msic_reg_update(reg, value, mask);
+}
+
+static int msic_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	u8 r;
+	int ret;
+	int reg;
+
+	reg = msic_gpio_to_ireg(offset);
+	if (reg < 0)
+		return reg;
+
+	ret = intel_msic_reg_read(reg, &r);
+	if (ret < 0)
+		return ret;
+
+	return !!(r & MSIC_GPIO_DIN_MASK);
+}
+
+static void msic_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	int reg;
+
+	reg = msic_gpio_to_oreg(offset);
+	if (reg < 0)
+		return;
+
+	intel_msic_reg_update(reg, !!value , MSIC_GPIO_DOUT_MASK);
+}
+
+/*
+ * This is called from genirq with mg->buslock locked and
+ * irq_desc->lock held. We can not access the scu bus here, so we
+ * store the change and update in the bus_sync_unlock() function below
+ */
+static int msic_irq_type(struct irq_data *data, unsigned type)
+{
+	struct msic_gpio *mg = irq_data_get_irq_chip_data(data);
+	u32 gpio = data->irq - mg->irq_base;
+
+	if (gpio >= mg->chip.ngpio)
+		return -EINVAL;
+
+	/* mark for which gpio the trigger changed, protected by buslock */
+	mg->trig_change_mask |= (1 << gpio);
+	mg->trig_type = type;
+
+	return 0;
+}
+
+static int msic_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	struct msic_gpio *mg = gpiochip_get_data(chip);
+	return mg->irq_base + offset;
+}
+
+static void msic_bus_lock(struct irq_data *data)
+{
+	struct msic_gpio *mg = irq_data_get_irq_chip_data(data);
+	mutex_lock(&mg->buslock);
+}
+
+static void msic_bus_sync_unlock(struct irq_data *data)
+{
+	struct msic_gpio *mg = irq_data_get_irq_chip_data(data);
+	int offset;
+	int reg;
+	u8 trig = 0;
+
+	/* We can only get one change at a time as the buslock covers the
+	   entire transaction. The irq_desc->lock is dropped before we are
+	   called but that is fine */
+	if (mg->trig_change_mask) {
+		offset = __ffs(mg->trig_change_mask);
+
+		reg = msic_gpio_to_ireg(offset);
+		if (reg < 0)
+			goto out;
+
+		if (mg->trig_type & IRQ_TYPE_EDGE_RISING)
+			trig |= MSIC_GPIO_TRIG_RISE;
+		if (mg->trig_type & IRQ_TYPE_EDGE_FALLING)
+			trig |= MSIC_GPIO_TRIG_FALL;
+
+		intel_msic_reg_update(reg, trig, MSIC_GPIO_INTCNT_MASK);
+		mg->trig_change_mask = 0;
+	}
+out:
+	mutex_unlock(&mg->buslock);
+}
+
+/* Firmware does all the masking and unmasking for us, no masking here. */
+static void msic_irq_unmask(struct irq_data *data) { }
+
+static void msic_irq_mask(struct irq_data *data) { }
+
+static struct irq_chip msic_irqchip = {
+	.name			= "MSIC-GPIO",
+	.irq_mask		= msic_irq_mask,
+	.irq_unmask		= msic_irq_unmask,
+	.irq_set_type		= msic_irq_type,
+	.irq_bus_lock		= msic_bus_lock,
+	.irq_bus_sync_unlock	= msic_bus_sync_unlock,
+};
+
+static void msic_gpio_irq_handler(struct irq_desc *desc)
+{
+	struct irq_data *data = irq_desc_get_irq_data(desc);
+	struct msic_gpio *mg = irq_data_get_irq_handler_data(data);
+	struct irq_chip *chip = irq_data_get_irq_chip(data);
+	struct intel_msic *msic = pdev_to_intel_msic(mg->pdev);
+	unsigned long pending;
+	int i;
+	int bitnr;
+	u8 pin;
+
+	for (i = 0; i < (mg->chip.ngpio / BITS_PER_BYTE); i++) {
+		intel_msic_irq_read(msic, INTEL_MSIC_GPIO0LVIRQ + i, &pin);
+		pending = pin;
+
+		for_each_set_bit(bitnr, &pending, BITS_PER_BYTE)
+			generic_handle_irq(mg->irq_base + i * BITS_PER_BYTE + bitnr);
+	}
+	chip->irq_eoi(data);
+}
+
+static int platform_msic_gpio_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct intel_msic_gpio_pdata *pdata = dev_get_platdata(dev);
+	struct msic_gpio *mg;
+	int irq = platform_get_irq(pdev, 0);
+	int retval;
+	int i;
+
+	if (irq < 0) {
+		dev_err(dev, "no IRQ line: %d\n", irq);
+		return irq;
+	}
+
+	if (!pdata || !pdata->gpio_base) {
+		dev_err(dev, "incorrect or missing platform data\n");
+		return -EINVAL;
+	}
+
+	mg = kzalloc(sizeof(*mg), GFP_KERNEL);
+	if (!mg)
+		return -ENOMEM;
+
+	dev_set_drvdata(dev, mg);
+
+	mg->pdev = pdev;
+	mg->irq = irq;
+	mg->irq_base = pdata->gpio_base + MSIC_GPIO_IRQ_OFFSET;
+	mg->chip.label = "msic_gpio";
+	mg->chip.direction_input = msic_gpio_direction_input;
+	mg->chip.direction_output = msic_gpio_direction_output;
+	mg->chip.get = msic_gpio_get;
+	mg->chip.set = msic_gpio_set;
+	mg->chip.to_irq = msic_gpio_to_irq;
+	mg->chip.base = pdata->gpio_base;
+	mg->chip.ngpio = MSIC_NUM_GPIO;
+	mg->chip.can_sleep = true;
+	mg->chip.parent = dev;
+
+	mutex_init(&mg->buslock);
+
+	retval = gpiochip_add_data(&mg->chip, mg);
+	if (retval) {
+		dev_err(dev, "Adding MSIC gpio chip failed\n");
+		goto err;
+	}
+
+	for (i = 0; i < mg->chip.ngpio; i++) {
+		irq_set_chip_data(i + mg->irq_base, mg);
+		irq_set_chip_and_handler(i + mg->irq_base,
+					 &msic_irqchip,
+					 handle_simple_irq);
+	}
+	irq_set_chained_handler_and_data(mg->irq, msic_gpio_irq_handler, mg);
+
+	return 0;
+err:
+	kfree(mg);
+	return retval;
+}
+
+static struct platform_driver platform_msic_gpio_driver = {
+	.driver = {
+		.name		= "msic_gpio",
+	},
+	.probe		= platform_msic_gpio_probe,
+};
+
+static int __init platform_msic_gpio_init(void)
+{
+	return platform_driver_register(&platform_msic_gpio_driver);
+}
+subsys_initcall(platform_msic_gpio_init);
diff --git a/drivers/gpio/gpio-mt7621.c b/drivers/gpio/gpio-mt7621.c
new file mode 100644
index 000000000..82fb20dca
--- /dev/null
+++ b/drivers/gpio/gpio-mt7621.c
@@ -0,0 +1,337 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/err.h>
+#include <linux/gpio/driver.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+
+#define MTK_BANK_CNT	3
+#define MTK_BANK_WIDTH	32
+
+#define GPIO_BANK_STRIDE	0x04
+#define GPIO_REG_CTRL		0x00
+#define GPIO_REG_POL		0x10
+#define GPIO_REG_DATA		0x20
+#define GPIO_REG_DSET		0x30
+#define GPIO_REG_DCLR		0x40
+#define GPIO_REG_REDGE		0x50
+#define GPIO_REG_FEDGE		0x60
+#define GPIO_REG_HLVL		0x70
+#define GPIO_REG_LLVL		0x80
+#define GPIO_REG_STAT		0x90
+#define GPIO_REG_EDGE		0xA0
+
+struct mtk_gc {
+	struct irq_chip irq_chip;
+	struct gpio_chip chip;
+	spinlock_t lock;
+	int bank;
+	u32 rising;
+	u32 falling;
+	u32 hlevel;
+	u32 llevel;
+};
+
+/**
+ * struct mtk - state container for
+ * data of the platform driver. It is 3
+ * separate gpio-chip each one with its
+ * own irq_chip.
+ * @dev: device instance
+ * @base: memory base address
+ * @gpio_irq: irq number from the device tree
+ * @gc_map: array of the gpio chips
+ */
+struct mtk {
+	struct device *dev;
+	void __iomem *base;
+	int gpio_irq;
+	struct mtk_gc gc_map[MTK_BANK_CNT];
+};
+
+static inline struct mtk_gc *
+to_mediatek_gpio(struct gpio_chip *chip)
+{
+	return container_of(chip, struct mtk_gc, chip);
+}
+
+static inline void
+mtk_gpio_w32(struct mtk_gc *rg, u32 offset, u32 val)
+{
+	struct gpio_chip *gc = &rg->chip;
+	struct mtk *mtk = gpiochip_get_data(gc);
+
+	offset = (rg->bank * GPIO_BANK_STRIDE) + offset;
+	gc->write_reg(mtk->base + offset, val);
+}
+
+static inline u32
+mtk_gpio_r32(struct mtk_gc *rg, u32 offset)
+{
+	struct gpio_chip *gc = &rg->chip;
+	struct mtk *mtk = gpiochip_get_data(gc);
+
+	offset = (rg->bank * GPIO_BANK_STRIDE) + offset;
+	return gc->read_reg(mtk->base + offset);
+}
+
+static irqreturn_t
+mediatek_gpio_irq_handler(int irq, void *data)
+{
+	struct gpio_chip *gc = data;
+	struct mtk_gc *rg = to_mediatek_gpio(gc);
+	irqreturn_t ret = IRQ_NONE;
+	unsigned long pending;
+	int bit;
+
+	pending = mtk_gpio_r32(rg, GPIO_REG_STAT);
+
+	for_each_set_bit(bit, &pending, MTK_BANK_WIDTH) {
+		u32 map = irq_find_mapping(gc->irq.domain, bit);
+
+		generic_handle_irq(map);
+		mtk_gpio_w32(rg, GPIO_REG_STAT, BIT(bit));
+		ret |= IRQ_HANDLED;
+	}
+
+	return ret;
+}
+
+static void
+mediatek_gpio_irq_unmask(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct mtk_gc *rg = to_mediatek_gpio(gc);
+	int pin = d->hwirq;
+	unsigned long flags;
+	u32 rise, fall, high, low;
+
+	spin_lock_irqsave(&rg->lock, flags);
+	rise = mtk_gpio_r32(rg, GPIO_REG_REDGE);
+	fall = mtk_gpio_r32(rg, GPIO_REG_FEDGE);
+	high = mtk_gpio_r32(rg, GPIO_REG_HLVL);
+	low = mtk_gpio_r32(rg, GPIO_REG_LLVL);
+	mtk_gpio_w32(rg, GPIO_REG_REDGE, rise | (BIT(pin) & rg->rising));
+	mtk_gpio_w32(rg, GPIO_REG_FEDGE, fall | (BIT(pin) & rg->falling));
+	mtk_gpio_w32(rg, GPIO_REG_HLVL, high | (BIT(pin) & rg->hlevel));
+	mtk_gpio_w32(rg, GPIO_REG_LLVL, low | (BIT(pin) & rg->llevel));
+	spin_unlock_irqrestore(&rg->lock, flags);
+}
+
+static void
+mediatek_gpio_irq_mask(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct mtk_gc *rg = to_mediatek_gpio(gc);
+	int pin = d->hwirq;
+	unsigned long flags;
+	u32 rise, fall, high, low;
+
+	spin_lock_irqsave(&rg->lock, flags);
+	rise = mtk_gpio_r32(rg, GPIO_REG_REDGE);
+	fall = mtk_gpio_r32(rg, GPIO_REG_FEDGE);
+	high = mtk_gpio_r32(rg, GPIO_REG_HLVL);
+	low = mtk_gpio_r32(rg, GPIO_REG_LLVL);
+	mtk_gpio_w32(rg, GPIO_REG_FEDGE, fall & ~BIT(pin));
+	mtk_gpio_w32(rg, GPIO_REG_REDGE, rise & ~BIT(pin));
+	mtk_gpio_w32(rg, GPIO_REG_HLVL, high & ~BIT(pin));
+	mtk_gpio_w32(rg, GPIO_REG_LLVL, low & ~BIT(pin));
+	spin_unlock_irqrestore(&rg->lock, flags);
+}
+
+static int
+mediatek_gpio_irq_type(struct irq_data *d, unsigned int type)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct mtk_gc *rg = to_mediatek_gpio(gc);
+	int pin = d->hwirq;
+	u32 mask = BIT(pin);
+
+	if (type == IRQ_TYPE_PROBE) {
+		if ((rg->rising | rg->falling |
+		     rg->hlevel | rg->llevel) & mask)
+			return 0;
+
+		type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
+	}
+
+	rg->rising &= ~mask;
+	rg->falling &= ~mask;
+	rg->hlevel &= ~mask;
+	rg->llevel &= ~mask;
+
+	switch (type & IRQ_TYPE_SENSE_MASK) {
+	case IRQ_TYPE_EDGE_BOTH:
+		rg->rising |= mask;
+		rg->falling |= mask;
+		break;
+	case IRQ_TYPE_EDGE_RISING:
+		rg->rising |= mask;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		rg->falling |= mask;
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		rg->hlevel |= mask;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		rg->llevel |= mask;
+		break;
+	}
+
+	return 0;
+}
+
+static int
+mediatek_gpio_xlate(struct gpio_chip *chip,
+		    const struct of_phandle_args *spec, u32 *flags)
+{
+	int gpio = spec->args[0];
+	struct mtk_gc *rg = to_mediatek_gpio(chip);
+
+	if (rg->bank != gpio / MTK_BANK_WIDTH)
+		return -EINVAL;
+
+	if (flags)
+		*flags = spec->args[1];
+
+	return gpio % MTK_BANK_WIDTH;
+}
+
+static int
+mediatek_gpio_bank_probe(struct device *dev,
+			 struct device_node *node, int bank)
+{
+	struct mtk *mtk = dev_get_drvdata(dev);
+	struct mtk_gc *rg;
+	void __iomem *dat, *set, *ctrl, *diro;
+	int ret;
+
+	rg = &mtk->gc_map[bank];
+	memset(rg, 0, sizeof(*rg));
+
+	spin_lock_init(&rg->lock);
+	rg->chip.of_node = node;
+	rg->bank = bank;
+
+	dat = mtk->base + GPIO_REG_DATA + (rg->bank * GPIO_BANK_STRIDE);
+	set = mtk->base + GPIO_REG_DSET + (rg->bank * GPIO_BANK_STRIDE);
+	ctrl = mtk->base + GPIO_REG_DCLR + (rg->bank * GPIO_BANK_STRIDE);
+	diro = mtk->base + GPIO_REG_CTRL + (rg->bank * GPIO_BANK_STRIDE);
+
+	ret = bgpio_init(&rg->chip, dev, 4, dat, set, ctrl, diro, NULL,
+			 BGPIOF_NO_SET_ON_INPUT);
+	if (ret) {
+		dev_err(dev, "bgpio_init() failed\n");
+		return ret;
+	}
+
+	rg->chip.of_gpio_n_cells = 2;
+	rg->chip.of_xlate = mediatek_gpio_xlate;
+	rg->chip.label = devm_kasprintf(dev, GFP_KERNEL, "%s-bank%d",
+					dev_name(dev), bank);
+	if (!rg->chip.label)
+		return -ENOMEM;
+
+	rg->irq_chip.name = dev_name(dev);
+	rg->irq_chip.parent_device = dev;
+	rg->irq_chip.irq_unmask = mediatek_gpio_irq_unmask;
+	rg->irq_chip.irq_mask = mediatek_gpio_irq_mask;
+	rg->irq_chip.irq_mask_ack = mediatek_gpio_irq_mask;
+	rg->irq_chip.irq_set_type = mediatek_gpio_irq_type;
+
+	if (mtk->gpio_irq) {
+		struct gpio_irq_chip *girq;
+
+		/*
+		 * Directly request the irq here instead of passing
+		 * a flow-handler because the irq is shared.
+		 */
+		ret = devm_request_irq(dev, mtk->gpio_irq,
+				       mediatek_gpio_irq_handler, IRQF_SHARED,
+				       rg->chip.label, &rg->chip);
+
+		if (ret) {
+			dev_err(dev, "Error requesting IRQ %d: %d\n",
+				mtk->gpio_irq, ret);
+			return ret;
+		}
+
+		girq = &rg->chip.irq;
+		girq->chip = &rg->irq_chip;
+		/* This will let us handle the parent IRQ in the driver */
+		girq->parent_handler = NULL;
+		girq->num_parents = 0;
+		girq->parents = NULL;
+		girq->default_type = IRQ_TYPE_NONE;
+		girq->handler = handle_simple_irq;
+	}
+
+	ret = devm_gpiochip_add_data(dev, &rg->chip, mtk);
+	if (ret < 0) {
+		dev_err(dev, "Could not register gpio %d, ret=%d\n",
+			rg->chip.ngpio, ret);
+		return ret;
+	}
+
+	/* set polarity to low for all gpios */
+	mtk_gpio_w32(rg, GPIO_REG_POL, 0);
+
+	dev_info(dev, "registering %d gpios\n", rg->chip.ngpio);
+
+	return 0;
+}
+
+static int
+mediatek_gpio_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct mtk *mtk;
+	int i;
+	int ret;
+
+	mtk = devm_kzalloc(dev, sizeof(*mtk), GFP_KERNEL);
+	if (!mtk)
+		return -ENOMEM;
+
+	mtk->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(mtk->base))
+		return PTR_ERR(mtk->base);
+
+	mtk->gpio_irq = irq_of_parse_and_map(np, 0);
+	mtk->dev = dev;
+	platform_set_drvdata(pdev, mtk);
+
+	for (i = 0; i < MTK_BANK_CNT; i++) {
+		ret = mediatek_gpio_bank_probe(dev, np, i);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id mediatek_gpio_match[] = {
+	{ .compatible = "mediatek,mt7621-gpio" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, mediatek_gpio_match);
+
+static struct platform_driver mediatek_gpio_driver = {
+	.probe = mediatek_gpio_probe,
+	.driver = {
+		.name = "mt7621_gpio",
+		.of_match_table = mediatek_gpio_match,
+	},
+};
+
+builtin_platform_driver(mediatek_gpio_driver);
diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c
new file mode 100644
index 000000000..2ab34a8e6
--- /dev/null
+++ b/drivers/gpio/gpio-mvebu.c
@@ -0,0 +1,1282 @@
+/*
+ * GPIO driver for Marvell SoCs
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ * Andrew Lunn <andrew@lunn.ch>
+ * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * This driver is a fairly straightforward GPIO driver for the
+ * complete family of Marvell EBU SoC platforms (Orion, Dove,
+ * Kirkwood, Discovery, Armada 370/XP). The only complexity of this
+ * driver is the different register layout that exists between the
+ * non-SMP platforms (Orion, Dove, Kirkwood, Armada 370) and the SMP
+ * platforms (MV78200 from the Discovery family and the Armada
+ * XP). Therefore, this driver handles three variants of the GPIO
+ * block:
+ * - the basic variant, called "orion-gpio", with the simplest
+ *   register set. Used on Orion, Dove, Kirkwoord, Armada 370 and
+ *   non-SMP Discovery systems
+ * - the mv78200 variant for MV78200 Discovery systems. This variant
+ *   turns the edge mask and level mask registers into CPU0 edge
+ *   mask/level mask registers, and adds CPU1 edge mask/level mask
+ *   registers.
+ * - the armadaxp variant for Armada XP systems. This variant keeps
+ *   the normal cause/edge mask/level mask registers when the global
+ *   interrupts are used, but adds per-CPU cause/edge mask/level mask
+ *   registers n a separate memory area for the per-CPU GPIO
+ *   interrupts.
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/gpio/driver.h>
+#include <linux/gpio/consumer.h>
+#include <linux/gpio/machine.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/irqdomain.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+/*
+ * GPIO unit register offsets.
+ */
+#define GPIO_OUT_OFF			0x0000
+#define GPIO_IO_CONF_OFF		0x0004
+#define GPIO_BLINK_EN_OFF		0x0008
+#define GPIO_IN_POL_OFF			0x000c
+#define GPIO_DATA_IN_OFF		0x0010
+#define GPIO_EDGE_CAUSE_OFF		0x0014
+#define GPIO_EDGE_MASK_OFF		0x0018
+#define GPIO_LEVEL_MASK_OFF		0x001c
+#define GPIO_BLINK_CNT_SELECT_OFF	0x0020
+
+/*
+ * PWM register offsets.
+ */
+#define PWM_BLINK_ON_DURATION_OFF	0x0
+#define PWM_BLINK_OFF_DURATION_OFF	0x4
+
+
+/* The MV78200 has per-CPU registers for edge mask and level mask */
+#define GPIO_EDGE_MASK_MV78200_OFF(cpu)	  ((cpu) ? 0x30 : 0x18)
+#define GPIO_LEVEL_MASK_MV78200_OFF(cpu)  ((cpu) ? 0x34 : 0x1C)
+
+/*
+ * The Armada XP has per-CPU registers for interrupt cause, interrupt
+ * mask and interrupt level mask. Those are relative to the
+ * percpu_membase.
+ */
+#define GPIO_EDGE_CAUSE_ARMADAXP_OFF(cpu) ((cpu) * 0x4)
+#define GPIO_EDGE_MASK_ARMADAXP_OFF(cpu)  (0x10 + (cpu) * 0x4)
+#define GPIO_LEVEL_MASK_ARMADAXP_OFF(cpu) (0x20 + (cpu) * 0x4)
+
+#define MVEBU_GPIO_SOC_VARIANT_ORION	0x1
+#define MVEBU_GPIO_SOC_VARIANT_MV78200	0x2
+#define MVEBU_GPIO_SOC_VARIANT_ARMADAXP 0x3
+#define MVEBU_GPIO_SOC_VARIANT_A8K	0x4
+
+#define MVEBU_MAX_GPIO_PER_BANK		32
+
+struct mvebu_pwm {
+	void __iomem		*membase;
+	unsigned long		 clk_rate;
+	struct gpio_desc	*gpiod;
+	struct pwm_chip		 chip;
+	spinlock_t		 lock;
+	struct mvebu_gpio_chip	*mvchip;
+
+	/* Used to preserve GPIO/PWM registers across suspend/resume */
+	u32			 blink_select;
+	u32			 blink_on_duration;
+	u32			 blink_off_duration;
+};
+
+struct mvebu_gpio_chip {
+	struct gpio_chip   chip;
+	struct regmap     *regs;
+	u32		   offset;
+	struct regmap     *percpu_regs;
+	int		   irqbase;
+	struct irq_domain *domain;
+	int		   soc_variant;
+
+	/* Used for PWM support */
+	struct clk	  *clk;
+	struct mvebu_pwm  *mvpwm;
+
+	/* Used to preserve GPIO registers across suspend/resume */
+	u32		   out_reg;
+	u32		   io_conf_reg;
+	u32		   blink_en_reg;
+	u32		   in_pol_reg;
+	u32		   edge_mask_regs[4];
+	u32		   level_mask_regs[4];
+};
+
+/*
+ * Functions returning addresses of individual registers for a given
+ * GPIO controller.
+ */
+
+static void mvebu_gpioreg_edge_cause(struct mvebu_gpio_chip *mvchip,
+			 struct regmap **map, unsigned int *offset)
+{
+	int cpu;
+
+	switch (mvchip->soc_variant) {
+	case MVEBU_GPIO_SOC_VARIANT_ORION:
+	case MVEBU_GPIO_SOC_VARIANT_MV78200:
+	case MVEBU_GPIO_SOC_VARIANT_A8K:
+		*map = mvchip->regs;
+		*offset = GPIO_EDGE_CAUSE_OFF + mvchip->offset;
+		break;
+	case MVEBU_GPIO_SOC_VARIANT_ARMADAXP:
+		cpu = smp_processor_id();
+		*map = mvchip->percpu_regs;
+		*offset = GPIO_EDGE_CAUSE_ARMADAXP_OFF(cpu);
+		break;
+	default:
+		BUG();
+	}
+}
+
+static u32
+mvebu_gpio_read_edge_cause(struct mvebu_gpio_chip *mvchip)
+{
+	struct regmap *map;
+	unsigned int offset;
+	u32 val;
+
+	mvebu_gpioreg_edge_cause(mvchip, &map, &offset);
+	regmap_read(map, offset, &val);
+
+	return val;
+}
+
+static void
+mvebu_gpio_write_edge_cause(struct mvebu_gpio_chip *mvchip, u32 val)
+{
+	struct regmap *map;
+	unsigned int offset;
+
+	mvebu_gpioreg_edge_cause(mvchip, &map, &offset);
+	regmap_write(map, offset, val);
+}
+
+static inline void
+mvebu_gpioreg_edge_mask(struct mvebu_gpio_chip *mvchip,
+			struct regmap **map, unsigned int *offset)
+{
+	int cpu;
+
+	switch (mvchip->soc_variant) {
+	case MVEBU_GPIO_SOC_VARIANT_ORION:
+	case MVEBU_GPIO_SOC_VARIANT_A8K:
+		*map = mvchip->regs;
+		*offset = GPIO_EDGE_MASK_OFF + mvchip->offset;
+		break;
+	case MVEBU_GPIO_SOC_VARIANT_MV78200:
+		cpu = smp_processor_id();
+		*map = mvchip->regs;
+		*offset = GPIO_EDGE_MASK_MV78200_OFF(cpu);
+		break;
+	case MVEBU_GPIO_SOC_VARIANT_ARMADAXP:
+		cpu = smp_processor_id();
+		*map = mvchip->percpu_regs;
+		*offset = GPIO_EDGE_MASK_ARMADAXP_OFF(cpu);
+		break;
+	default:
+		BUG();
+	}
+}
+
+static u32
+mvebu_gpio_read_edge_mask(struct mvebu_gpio_chip *mvchip)
+{
+	struct regmap *map;
+	unsigned int offset;
+	u32 val;
+
+	mvebu_gpioreg_edge_mask(mvchip, &map, &offset);
+	regmap_read(map, offset, &val);
+
+	return val;
+}
+
+static void
+mvebu_gpio_write_edge_mask(struct mvebu_gpio_chip *mvchip, u32 val)
+{
+	struct regmap *map;
+	unsigned int offset;
+
+	mvebu_gpioreg_edge_mask(mvchip, &map, &offset);
+	regmap_write(map, offset, val);
+}
+
+static void
+mvebu_gpioreg_level_mask(struct mvebu_gpio_chip *mvchip,
+			 struct regmap **map, unsigned int *offset)
+{
+	int cpu;
+
+	switch (mvchip->soc_variant) {
+	case MVEBU_GPIO_SOC_VARIANT_ORION:
+	case MVEBU_GPIO_SOC_VARIANT_A8K:
+		*map = mvchip->regs;
+		*offset = GPIO_LEVEL_MASK_OFF + mvchip->offset;
+		break;
+	case MVEBU_GPIO_SOC_VARIANT_MV78200:
+		cpu = smp_processor_id();
+		*map = mvchip->regs;
+		*offset = GPIO_LEVEL_MASK_MV78200_OFF(cpu);
+		break;
+	case MVEBU_GPIO_SOC_VARIANT_ARMADAXP:
+		cpu = smp_processor_id();
+		*map = mvchip->percpu_regs;
+		*offset = GPIO_LEVEL_MASK_ARMADAXP_OFF(cpu);
+		break;
+	default:
+		BUG();
+	}
+}
+
+static u32
+mvebu_gpio_read_level_mask(struct mvebu_gpio_chip *mvchip)
+{
+	struct regmap *map;
+	unsigned int offset;
+	u32 val;
+
+	mvebu_gpioreg_level_mask(mvchip, &map, &offset);
+	regmap_read(map, offset, &val);
+
+	return val;
+}
+
+static void
+mvebu_gpio_write_level_mask(struct mvebu_gpio_chip *mvchip, u32 val)
+{
+	struct regmap *map;
+	unsigned int offset;
+
+	mvebu_gpioreg_level_mask(mvchip, &map, &offset);
+	regmap_write(map, offset, val);
+}
+
+/*
+ * Functions returning addresses of individual registers for a given
+ * PWM controller.
+ */
+static void __iomem *mvebu_pwmreg_blink_on_duration(struct mvebu_pwm *mvpwm)
+{
+	return mvpwm->membase + PWM_BLINK_ON_DURATION_OFF;
+}
+
+static void __iomem *mvebu_pwmreg_blink_off_duration(struct mvebu_pwm *mvpwm)
+{
+	return mvpwm->membase + PWM_BLINK_OFF_DURATION_OFF;
+}
+
+/*
+ * Functions implementing the gpio_chip methods
+ */
+static void mvebu_gpio_set(struct gpio_chip *chip, unsigned int pin, int value)
+{
+	struct mvebu_gpio_chip *mvchip = gpiochip_get_data(chip);
+
+	regmap_update_bits(mvchip->regs, GPIO_OUT_OFF + mvchip->offset,
+			   BIT(pin), value ? BIT(pin) : 0);
+}
+
+static int mvebu_gpio_get(struct gpio_chip *chip, unsigned int pin)
+{
+	struct mvebu_gpio_chip *mvchip = gpiochip_get_data(chip);
+	u32 u;
+
+	regmap_read(mvchip->regs, GPIO_IO_CONF_OFF + mvchip->offset, &u);
+
+	if (u & BIT(pin)) {
+		u32 data_in, in_pol;
+
+		regmap_read(mvchip->regs, GPIO_DATA_IN_OFF + mvchip->offset,
+			    &data_in);
+		regmap_read(mvchip->regs, GPIO_IN_POL_OFF + mvchip->offset,
+			    &in_pol);
+		u = data_in ^ in_pol;
+	} else {
+		regmap_read(mvchip->regs, GPIO_OUT_OFF + mvchip->offset, &u);
+	}
+
+	return (u >> pin) & 1;
+}
+
+static void mvebu_gpio_blink(struct gpio_chip *chip, unsigned int pin,
+			     int value)
+{
+	struct mvebu_gpio_chip *mvchip = gpiochip_get_data(chip);
+
+	regmap_update_bits(mvchip->regs, GPIO_BLINK_EN_OFF + mvchip->offset,
+			   BIT(pin), value ? BIT(pin) : 0);
+}
+
+static int mvebu_gpio_direction_input(struct gpio_chip *chip, unsigned int pin)
+{
+	struct mvebu_gpio_chip *mvchip = gpiochip_get_data(chip);
+	int ret;
+
+	/*
+	 * Check with the pinctrl driver whether this pin is usable as
+	 * an input GPIO
+	 */
+	ret = pinctrl_gpio_direction_input(chip->base + pin);
+	if (ret)
+		return ret;
+
+	regmap_update_bits(mvchip->regs, GPIO_IO_CONF_OFF + mvchip->offset,
+			   BIT(pin), BIT(pin));
+
+	return 0;
+}
+
+static int mvebu_gpio_direction_output(struct gpio_chip *chip, unsigned int pin,
+				       int value)
+{
+	struct mvebu_gpio_chip *mvchip = gpiochip_get_data(chip);
+	int ret;
+
+	/*
+	 * Check with the pinctrl driver whether this pin is usable as
+	 * an output GPIO
+	 */
+	ret = pinctrl_gpio_direction_output(chip->base + pin);
+	if (ret)
+		return ret;
+
+	mvebu_gpio_blink(chip, pin, 0);
+	mvebu_gpio_set(chip, pin, value);
+
+	regmap_update_bits(mvchip->regs, GPIO_IO_CONF_OFF + mvchip->offset,
+			   BIT(pin), 0);
+
+	return 0;
+}
+
+static int mvebu_gpio_get_direction(struct gpio_chip *chip, unsigned int pin)
+{
+	struct mvebu_gpio_chip *mvchip = gpiochip_get_data(chip);
+	u32 u;
+
+	regmap_read(mvchip->regs, GPIO_IO_CONF_OFF + mvchip->offset, &u);
+
+	if (u & BIT(pin))
+		return GPIO_LINE_DIRECTION_IN;
+
+	return GPIO_LINE_DIRECTION_OUT;
+}
+
+static int mvebu_gpio_to_irq(struct gpio_chip *chip, unsigned int pin)
+{
+	struct mvebu_gpio_chip *mvchip = gpiochip_get_data(chip);
+
+	return irq_create_mapping(mvchip->domain, pin);
+}
+
+/*
+ * Functions implementing the irq_chip methods
+ */
+static void mvebu_gpio_irq_ack(struct irq_data *d)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	struct mvebu_gpio_chip *mvchip = gc->private;
+	u32 mask = d->mask;
+
+	irq_gc_lock(gc);
+	mvebu_gpio_write_edge_cause(mvchip, ~mask);
+	irq_gc_unlock(gc);
+}
+
+static void mvebu_gpio_edge_irq_mask(struct irq_data *d)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	struct mvebu_gpio_chip *mvchip = gc->private;
+	struct irq_chip_type *ct = irq_data_get_chip_type(d);
+	u32 mask = d->mask;
+
+	irq_gc_lock(gc);
+	ct->mask_cache_priv &= ~mask;
+	mvebu_gpio_write_edge_mask(mvchip, ct->mask_cache_priv);
+	irq_gc_unlock(gc);
+}
+
+static void mvebu_gpio_edge_irq_unmask(struct irq_data *d)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	struct mvebu_gpio_chip *mvchip = gc->private;
+	struct irq_chip_type *ct = irq_data_get_chip_type(d);
+	u32 mask = d->mask;
+
+	irq_gc_lock(gc);
+	mvebu_gpio_write_edge_cause(mvchip, ~mask);
+	ct->mask_cache_priv |= mask;
+	mvebu_gpio_write_edge_mask(mvchip, ct->mask_cache_priv);
+	irq_gc_unlock(gc);
+}
+
+static void mvebu_gpio_level_irq_mask(struct irq_data *d)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	struct mvebu_gpio_chip *mvchip = gc->private;
+	struct irq_chip_type *ct = irq_data_get_chip_type(d);
+	u32 mask = d->mask;
+
+	irq_gc_lock(gc);
+	ct->mask_cache_priv &= ~mask;
+	mvebu_gpio_write_level_mask(mvchip, ct->mask_cache_priv);
+	irq_gc_unlock(gc);
+}
+
+static void mvebu_gpio_level_irq_unmask(struct irq_data *d)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	struct mvebu_gpio_chip *mvchip = gc->private;
+	struct irq_chip_type *ct = irq_data_get_chip_type(d);
+	u32 mask = d->mask;
+
+	irq_gc_lock(gc);
+	ct->mask_cache_priv |= mask;
+	mvebu_gpio_write_level_mask(mvchip, ct->mask_cache_priv);
+	irq_gc_unlock(gc);
+}
+
+/*****************************************************************************
+ * MVEBU GPIO IRQ
+ *
+ * GPIO_IN_POL register controls whether GPIO_DATA_IN will hold the same
+ * value of the line or the opposite value.
+ *
+ * Level IRQ handlers: DATA_IN is used directly as cause register.
+ *		       Interrupt are masked by LEVEL_MASK registers.
+ * Edge IRQ handlers:  Change in DATA_IN are latched in EDGE_CAUSE.
+ *		       Interrupt are masked by EDGE_MASK registers.
+ * Both-edge handlers: Similar to regular Edge handlers, but also swaps
+ *		       the polarity to catch the next line transaction.
+ *		       This is a race condition that might not perfectly
+ *		       work on some use cases.
+ *
+ * Every eight GPIO lines are grouped (OR'ed) before going up to main
+ * cause register.
+ *
+ *		      EDGE  cause    mask
+ *	  data-in   /--------| |-----| |----\
+ *     -----| |-----			     ---- to main cause reg
+ *	     X	    \----------------| |----/
+ *	  polarity    LEVEL	     mask
+ *
+ ****************************************************************************/
+
+static int mvebu_gpio_irq_set_type(struct irq_data *d, unsigned int type)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	struct irq_chip_type *ct = irq_data_get_chip_type(d);
+	struct mvebu_gpio_chip *mvchip = gc->private;
+	int pin;
+	u32 u;
+
+	pin = d->hwirq;
+
+	regmap_read(mvchip->regs, GPIO_IO_CONF_OFF + mvchip->offset, &u);
+	if ((u & BIT(pin)) == 0)
+		return -EINVAL;
+
+	type &= IRQ_TYPE_SENSE_MASK;
+	if (type == IRQ_TYPE_NONE)
+		return -EINVAL;
+
+	/* Check if we need to change chip and handler */
+	if (!(ct->type & type))
+		if (irq_setup_alt_chip(d, type))
+			return -EINVAL;
+
+	/*
+	 * Configure interrupt polarity.
+	 */
+	switch (type) {
+	case IRQ_TYPE_EDGE_RISING:
+	case IRQ_TYPE_LEVEL_HIGH:
+		regmap_update_bits(mvchip->regs,
+				   GPIO_IN_POL_OFF + mvchip->offset,
+				   BIT(pin), 0);
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+	case IRQ_TYPE_LEVEL_LOW:
+		regmap_update_bits(mvchip->regs,
+				   GPIO_IN_POL_OFF + mvchip->offset,
+				   BIT(pin), BIT(pin));
+		break;
+	case IRQ_TYPE_EDGE_BOTH: {
+		u32 data_in, in_pol, val;
+
+		regmap_read(mvchip->regs,
+			    GPIO_IN_POL_OFF + mvchip->offset, &in_pol);
+		regmap_read(mvchip->regs,
+			    GPIO_DATA_IN_OFF + mvchip->offset, &data_in);
+
+		/*
+		 * set initial polarity based on current input level
+		 */
+		if ((data_in ^ in_pol) & BIT(pin))
+			val = BIT(pin); /* falling */
+		else
+			val = 0; /* raising */
+
+		regmap_update_bits(mvchip->regs,
+				   GPIO_IN_POL_OFF + mvchip->offset,
+				   BIT(pin), val);
+		break;
+	}
+	}
+	return 0;
+}
+
+static void mvebu_gpio_irq_handler(struct irq_desc *desc)
+{
+	struct mvebu_gpio_chip *mvchip = irq_desc_get_handler_data(desc);
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+	u32 cause, type, data_in, level_mask, edge_cause, edge_mask;
+	int i;
+
+	if (mvchip == NULL)
+		return;
+
+	chained_irq_enter(chip, desc);
+
+	regmap_read(mvchip->regs, GPIO_DATA_IN_OFF + mvchip->offset, &data_in);
+	level_mask = mvebu_gpio_read_level_mask(mvchip);
+	edge_cause = mvebu_gpio_read_edge_cause(mvchip);
+	edge_mask  = mvebu_gpio_read_edge_mask(mvchip);
+
+	cause = (data_in & level_mask) | (edge_cause & edge_mask);
+
+	for (i = 0; i < mvchip->chip.ngpio; i++) {
+		int irq;
+
+		irq = irq_find_mapping(mvchip->domain, i);
+
+		if (!(cause & BIT(i)))
+			continue;
+
+		type = irq_get_trigger_type(irq);
+		if ((type & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) {
+			/* Swap polarity (race with GPIO line) */
+			u32 polarity;
+
+			regmap_read(mvchip->regs,
+				    GPIO_IN_POL_OFF + mvchip->offset,
+				    &polarity);
+			polarity ^= BIT(i);
+			regmap_write(mvchip->regs,
+				     GPIO_IN_POL_OFF + mvchip->offset,
+				     polarity);
+		}
+
+		generic_handle_irq(irq);
+	}
+
+	chained_irq_exit(chip, desc);
+}
+
+/*
+ * Functions implementing the pwm_chip methods
+ */
+static struct mvebu_pwm *to_mvebu_pwm(struct pwm_chip *chip)
+{
+	return container_of(chip, struct mvebu_pwm, chip);
+}
+
+static int mvebu_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct mvebu_pwm *mvpwm = to_mvebu_pwm(chip);
+	struct mvebu_gpio_chip *mvchip = mvpwm->mvchip;
+	struct gpio_desc *desc;
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&mvpwm->lock, flags);
+
+	if (mvpwm->gpiod) {
+		ret = -EBUSY;
+	} else {
+		desc = gpiochip_request_own_desc(&mvchip->chip,
+						 pwm->hwpwm, "mvebu-pwm",
+						 GPIO_ACTIVE_HIGH,
+						 GPIOD_OUT_LOW);
+		if (IS_ERR(desc)) {
+			ret = PTR_ERR(desc);
+			goto out;
+		}
+
+		mvpwm->gpiod = desc;
+	}
+out:
+	spin_unlock_irqrestore(&mvpwm->lock, flags);
+	return ret;
+}
+
+static void mvebu_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct mvebu_pwm *mvpwm = to_mvebu_pwm(chip);
+	unsigned long flags;
+
+	spin_lock_irqsave(&mvpwm->lock, flags);
+	gpiochip_free_own_desc(mvpwm->gpiod);
+	mvpwm->gpiod = NULL;
+	spin_unlock_irqrestore(&mvpwm->lock, flags);
+}
+
+static void mvebu_pwm_get_state(struct pwm_chip *chip,
+				struct pwm_device *pwm,
+				struct pwm_state *state) {
+
+	struct mvebu_pwm *mvpwm = to_mvebu_pwm(chip);
+	struct mvebu_gpio_chip *mvchip = mvpwm->mvchip;
+	unsigned long long val;
+	unsigned long flags;
+	u32 u;
+
+	spin_lock_irqsave(&mvpwm->lock, flags);
+
+	u = readl_relaxed(mvebu_pwmreg_blink_on_duration(mvpwm));
+	val = (unsigned long long) u * NSEC_PER_SEC;
+	do_div(val, mvpwm->clk_rate);
+	if (val > UINT_MAX)
+		state->duty_cycle = UINT_MAX;
+	else if (val)
+		state->duty_cycle = val;
+	else
+		state->duty_cycle = 1;
+
+	val = (unsigned long long) u; /* on duration */
+	/* period = on + off duration */
+	val += readl_relaxed(mvebu_pwmreg_blink_off_duration(mvpwm));
+	val *= NSEC_PER_SEC;
+	do_div(val, mvpwm->clk_rate);
+	if (val > UINT_MAX)
+		state->period = UINT_MAX;
+	else if (val)
+		state->period = val;
+	else
+		state->period = 1;
+
+	regmap_read(mvchip->regs, GPIO_BLINK_EN_OFF + mvchip->offset, &u);
+	if (u)
+		state->enabled = true;
+	else
+		state->enabled = false;
+
+	spin_unlock_irqrestore(&mvpwm->lock, flags);
+}
+
+static int mvebu_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			   const struct pwm_state *state)
+{
+	struct mvebu_pwm *mvpwm = to_mvebu_pwm(chip);
+	struct mvebu_gpio_chip *mvchip = mvpwm->mvchip;
+	unsigned long long val;
+	unsigned long flags;
+	unsigned int on, off;
+
+	if (state->polarity != PWM_POLARITY_NORMAL)
+		return -EINVAL;
+
+	val = (unsigned long long) mvpwm->clk_rate * state->duty_cycle;
+	do_div(val, NSEC_PER_SEC);
+	if (val > UINT_MAX)
+		return -EINVAL;
+	if (val)
+		on = val;
+	else
+		on = 1;
+
+	val = (unsigned long long) mvpwm->clk_rate *
+		(state->period - state->duty_cycle);
+	do_div(val, NSEC_PER_SEC);
+	if (val > UINT_MAX)
+		return -EINVAL;
+	if (val)
+		off = val;
+	else
+		off = 1;
+
+	spin_lock_irqsave(&mvpwm->lock, flags);
+
+	writel_relaxed(on, mvebu_pwmreg_blink_on_duration(mvpwm));
+	writel_relaxed(off, mvebu_pwmreg_blink_off_duration(mvpwm));
+	if (state->enabled)
+		mvebu_gpio_blink(&mvchip->chip, pwm->hwpwm, 1);
+	else
+		mvebu_gpio_blink(&mvchip->chip, pwm->hwpwm, 0);
+
+	spin_unlock_irqrestore(&mvpwm->lock, flags);
+
+	return 0;
+}
+
+static const struct pwm_ops mvebu_pwm_ops = {
+	.request = mvebu_pwm_request,
+	.free = mvebu_pwm_free,
+	.get_state = mvebu_pwm_get_state,
+	.apply = mvebu_pwm_apply,
+	.owner = THIS_MODULE,
+};
+
+static void __maybe_unused mvebu_pwm_suspend(struct mvebu_gpio_chip *mvchip)
+{
+	struct mvebu_pwm *mvpwm = mvchip->mvpwm;
+
+	regmap_read(mvchip->regs, GPIO_BLINK_CNT_SELECT_OFF + mvchip->offset,
+		    &mvpwm->blink_select);
+	mvpwm->blink_on_duration =
+		readl_relaxed(mvebu_pwmreg_blink_on_duration(mvpwm));
+	mvpwm->blink_off_duration =
+		readl_relaxed(mvebu_pwmreg_blink_off_duration(mvpwm));
+}
+
+static void __maybe_unused mvebu_pwm_resume(struct mvebu_gpio_chip *mvchip)
+{
+	struct mvebu_pwm *mvpwm = mvchip->mvpwm;
+
+	regmap_write(mvchip->regs, GPIO_BLINK_CNT_SELECT_OFF + mvchip->offset,
+		     mvpwm->blink_select);
+	writel_relaxed(mvpwm->blink_on_duration,
+		       mvebu_pwmreg_blink_on_duration(mvpwm));
+	writel_relaxed(mvpwm->blink_off_duration,
+		       mvebu_pwmreg_blink_off_duration(mvpwm));
+}
+
+static int mvebu_pwm_probe(struct platform_device *pdev,
+			   struct mvebu_gpio_chip *mvchip,
+			   int id)
+{
+	struct device *dev = &pdev->dev;
+	struct mvebu_pwm *mvpwm;
+	u32 set;
+
+	if (!of_device_is_compatible(mvchip->chip.of_node,
+				     "marvell,armada-370-gpio"))
+		return 0;
+
+	/*
+	 * There are only two sets of PWM configuration registers for
+	 * all the GPIO lines on those SoCs which this driver reserves
+	 * for the first two GPIO chips. So if the resource is missing
+	 * we can't treat it as an error.
+	 */
+	if (!platform_get_resource_byname(pdev, IORESOURCE_MEM, "pwm"))
+		return 0;
+
+	if (IS_ERR(mvchip->clk))
+		return PTR_ERR(mvchip->clk);
+
+	/*
+	 * Use set A for lines of GPIO chip with id 0, B for GPIO chip
+	 * with id 1. Don't allow further GPIO chips to be used for PWM.
+	 */
+	if (id == 0)
+		set = 0;
+	else if (id == 1)
+		set = U32_MAX;
+	else
+		return -EINVAL;
+	regmap_write(mvchip->regs,
+		     GPIO_BLINK_CNT_SELECT_OFF + mvchip->offset, set);
+
+	mvpwm = devm_kzalloc(dev, sizeof(struct mvebu_pwm), GFP_KERNEL);
+	if (!mvpwm)
+		return -ENOMEM;
+	mvchip->mvpwm = mvpwm;
+	mvpwm->mvchip = mvchip;
+
+	mvpwm->membase = devm_platform_ioremap_resource_byname(pdev, "pwm");
+	if (IS_ERR(mvpwm->membase))
+		return PTR_ERR(mvpwm->membase);
+
+	mvpwm->clk_rate = clk_get_rate(mvchip->clk);
+	if (!mvpwm->clk_rate) {
+		dev_err(dev, "failed to get clock rate\n");
+		return -EINVAL;
+	}
+
+	mvpwm->chip.dev = dev;
+	mvpwm->chip.ops = &mvebu_pwm_ops;
+	mvpwm->chip.npwm = mvchip->chip.ngpio;
+	/*
+	 * There may already be some PWM allocated, so we can't force
+	 * mvpwm->chip.base to a fixed point like mvchip->chip.base.
+	 * So, we let pwmchip_add() do the numbering and take the next free
+	 * region.
+	 */
+	mvpwm->chip.base = -1;
+
+	spin_lock_init(&mvpwm->lock);
+
+	return pwmchip_add(&mvpwm->chip);
+}
+
+#ifdef CONFIG_DEBUG_FS
+#include <linux/seq_file.h>
+
+static void mvebu_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
+{
+	struct mvebu_gpio_chip *mvchip = gpiochip_get_data(chip);
+	u32 out, io_conf, blink, in_pol, data_in, cause, edg_msk, lvl_msk;
+	const char *label;
+	int i;
+
+	regmap_read(mvchip->regs, GPIO_OUT_OFF + mvchip->offset, &out);
+	regmap_read(mvchip->regs, GPIO_IO_CONF_OFF + mvchip->offset, &io_conf);
+	regmap_read(mvchip->regs, GPIO_BLINK_EN_OFF + mvchip->offset, &blink);
+	regmap_read(mvchip->regs, GPIO_IN_POL_OFF + mvchip->offset, &in_pol);
+	regmap_read(mvchip->regs, GPIO_DATA_IN_OFF + mvchip->offset, &data_in);
+	cause	= mvebu_gpio_read_edge_cause(mvchip);
+	edg_msk	= mvebu_gpio_read_edge_mask(mvchip);
+	lvl_msk	= mvebu_gpio_read_level_mask(mvchip);
+
+	for_each_requested_gpio(chip, i, label) {
+		u32 msk;
+		bool is_out;
+
+		msk = BIT(i);
+		is_out = !(io_conf & msk);
+
+		seq_printf(s, " gpio-%-3d (%-20.20s)", chip->base + i, label);
+
+		if (is_out) {
+			seq_printf(s, " out %s %s\n",
+				   out & msk ? "hi" : "lo",
+				   blink & msk ? "(blink )" : "");
+			continue;
+		}
+
+		seq_printf(s, " in  %s (act %s) - IRQ",
+			   (data_in ^ in_pol) & msk  ? "hi" : "lo",
+			   in_pol & msk ? "lo" : "hi");
+		if (!((edg_msk | lvl_msk) & msk)) {
+			seq_puts(s, " disabled\n");
+			continue;
+		}
+		if (edg_msk & msk)
+			seq_puts(s, " edge ");
+		if (lvl_msk & msk)
+			seq_puts(s, " level");
+		seq_printf(s, " (%s)\n", cause & msk ? "pending" : "clear  ");
+	}
+}
+#else
+#define mvebu_gpio_dbg_show NULL
+#endif
+
+static const struct of_device_id mvebu_gpio_of_match[] = {
+	{
+		.compatible = "marvell,orion-gpio",
+		.data	    = (void *) MVEBU_GPIO_SOC_VARIANT_ORION,
+	},
+	{
+		.compatible = "marvell,mv78200-gpio",
+		.data	    = (void *) MVEBU_GPIO_SOC_VARIANT_MV78200,
+	},
+	{
+		.compatible = "marvell,armadaxp-gpio",
+		.data	    = (void *) MVEBU_GPIO_SOC_VARIANT_ARMADAXP,
+	},
+	{
+		.compatible = "marvell,armada-370-gpio",
+		.data	    = (void *) MVEBU_GPIO_SOC_VARIANT_ORION,
+	},
+	{
+		.compatible = "marvell,armada-8k-gpio",
+		.data       = (void *) MVEBU_GPIO_SOC_VARIANT_A8K,
+	},
+	{
+		/* sentinel */
+	},
+};
+
+static int mvebu_gpio_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct mvebu_gpio_chip *mvchip = platform_get_drvdata(pdev);
+	int i;
+
+	regmap_read(mvchip->regs, GPIO_OUT_OFF + mvchip->offset,
+		    &mvchip->out_reg);
+	regmap_read(mvchip->regs, GPIO_IO_CONF_OFF + mvchip->offset,
+		    &mvchip->io_conf_reg);
+	regmap_read(mvchip->regs, GPIO_BLINK_EN_OFF + mvchip->offset,
+		    &mvchip->blink_en_reg);
+	regmap_read(mvchip->regs, GPIO_IN_POL_OFF + mvchip->offset,
+		    &mvchip->in_pol_reg);
+
+	switch (mvchip->soc_variant) {
+	case MVEBU_GPIO_SOC_VARIANT_ORION:
+	case MVEBU_GPIO_SOC_VARIANT_A8K:
+		regmap_read(mvchip->regs, GPIO_EDGE_MASK_OFF + mvchip->offset,
+			    &mvchip->edge_mask_regs[0]);
+		regmap_read(mvchip->regs, GPIO_LEVEL_MASK_OFF + mvchip->offset,
+			    &mvchip->level_mask_regs[0]);
+		break;
+	case MVEBU_GPIO_SOC_VARIANT_MV78200:
+		for (i = 0; i < 2; i++) {
+			regmap_read(mvchip->regs,
+				    GPIO_EDGE_MASK_MV78200_OFF(i),
+				    &mvchip->edge_mask_regs[i]);
+			regmap_read(mvchip->regs,
+				    GPIO_LEVEL_MASK_MV78200_OFF(i),
+				    &mvchip->level_mask_regs[i]);
+		}
+		break;
+	case MVEBU_GPIO_SOC_VARIANT_ARMADAXP:
+		for (i = 0; i < 4; i++) {
+			regmap_read(mvchip->regs,
+				    GPIO_EDGE_MASK_ARMADAXP_OFF(i),
+				    &mvchip->edge_mask_regs[i]);
+			regmap_read(mvchip->regs,
+				    GPIO_LEVEL_MASK_ARMADAXP_OFF(i),
+				    &mvchip->level_mask_regs[i]);
+		}
+		break;
+	default:
+		BUG();
+	}
+
+	if (IS_ENABLED(CONFIG_PWM))
+		mvebu_pwm_suspend(mvchip);
+
+	return 0;
+}
+
+static int mvebu_gpio_resume(struct platform_device *pdev)
+{
+	struct mvebu_gpio_chip *mvchip = platform_get_drvdata(pdev);
+	int i;
+
+	regmap_write(mvchip->regs, GPIO_OUT_OFF + mvchip->offset,
+		     mvchip->out_reg);
+	regmap_write(mvchip->regs, GPIO_IO_CONF_OFF + mvchip->offset,
+		     mvchip->io_conf_reg);
+	regmap_write(mvchip->regs, GPIO_BLINK_EN_OFF + mvchip->offset,
+		     mvchip->blink_en_reg);
+	regmap_write(mvchip->regs, GPIO_IN_POL_OFF + mvchip->offset,
+		     mvchip->in_pol_reg);
+
+	switch (mvchip->soc_variant) {
+	case MVEBU_GPIO_SOC_VARIANT_ORION:
+	case MVEBU_GPIO_SOC_VARIANT_A8K:
+		regmap_write(mvchip->regs, GPIO_EDGE_MASK_OFF + mvchip->offset,
+			     mvchip->edge_mask_regs[0]);
+		regmap_write(mvchip->regs, GPIO_LEVEL_MASK_OFF + mvchip->offset,
+			     mvchip->level_mask_regs[0]);
+		break;
+	case MVEBU_GPIO_SOC_VARIANT_MV78200:
+		for (i = 0; i < 2; i++) {
+			regmap_write(mvchip->regs,
+				     GPIO_EDGE_MASK_MV78200_OFF(i),
+				     mvchip->edge_mask_regs[i]);
+			regmap_write(mvchip->regs,
+				     GPIO_LEVEL_MASK_MV78200_OFF(i),
+				     mvchip->level_mask_regs[i]);
+		}
+		break;
+	case MVEBU_GPIO_SOC_VARIANT_ARMADAXP:
+		for (i = 0; i < 4; i++) {
+			regmap_write(mvchip->regs,
+				     GPIO_EDGE_MASK_ARMADAXP_OFF(i),
+				     mvchip->edge_mask_regs[i]);
+			regmap_write(mvchip->regs,
+				     GPIO_LEVEL_MASK_ARMADAXP_OFF(i),
+				     mvchip->level_mask_regs[i]);
+		}
+		break;
+	default:
+		BUG();
+	}
+
+	if (IS_ENABLED(CONFIG_PWM))
+		mvebu_pwm_resume(mvchip);
+
+	return 0;
+}
+
+static const struct regmap_config mvebu_gpio_regmap_config = {
+	.reg_bits = 32,
+	.reg_stride = 4,
+	.val_bits = 32,
+	.fast_io = true,
+};
+
+static int mvebu_gpio_probe_raw(struct platform_device *pdev,
+				struct mvebu_gpio_chip *mvchip)
+{
+	void __iomem *base;
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	mvchip->regs = devm_regmap_init_mmio(&pdev->dev, base,
+					     &mvebu_gpio_regmap_config);
+	if (IS_ERR(mvchip->regs))
+		return PTR_ERR(mvchip->regs);
+
+	/*
+	 * For the legacy SoCs, the regmap directly maps to the GPIO
+	 * registers, so no offset is needed.
+	 */
+	mvchip->offset = 0;
+
+	/*
+	 * The Armada XP has a second range of registers for the
+	 * per-CPU registers
+	 */
+	if (mvchip->soc_variant == MVEBU_GPIO_SOC_VARIANT_ARMADAXP) {
+		base = devm_platform_ioremap_resource(pdev, 1);
+		if (IS_ERR(base))
+			return PTR_ERR(base);
+
+		mvchip->percpu_regs =
+			devm_regmap_init_mmio(&pdev->dev, base,
+					      &mvebu_gpio_regmap_config);
+		if (IS_ERR(mvchip->percpu_regs))
+			return PTR_ERR(mvchip->percpu_regs);
+	}
+
+	return 0;
+}
+
+static int mvebu_gpio_probe_syscon(struct platform_device *pdev,
+				   struct mvebu_gpio_chip *mvchip)
+{
+	mvchip->regs = syscon_node_to_regmap(pdev->dev.parent->of_node);
+	if (IS_ERR(mvchip->regs))
+		return PTR_ERR(mvchip->regs);
+
+	if (of_property_read_u32(pdev->dev.of_node, "offset", &mvchip->offset))
+		return -EINVAL;
+
+	return 0;
+}
+
+static int mvebu_gpio_probe(struct platform_device *pdev)
+{
+	struct mvebu_gpio_chip *mvchip;
+	const struct of_device_id *match;
+	struct device_node *np = pdev->dev.of_node;
+	struct irq_chip_generic *gc;
+	struct irq_chip_type *ct;
+	unsigned int ngpios;
+	bool have_irqs;
+	int soc_variant;
+	int i, cpu, id;
+	int err;
+
+	match = of_match_device(mvebu_gpio_of_match, &pdev->dev);
+	if (match)
+		soc_variant = (unsigned long) match->data;
+	else
+		soc_variant = MVEBU_GPIO_SOC_VARIANT_ORION;
+
+	/* Some gpio controllers do not provide irq support */
+	err = platform_irq_count(pdev);
+	if (err < 0)
+		return err;
+
+	have_irqs = err != 0;
+
+	mvchip = devm_kzalloc(&pdev->dev, sizeof(struct mvebu_gpio_chip),
+			      GFP_KERNEL);
+	if (!mvchip)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, mvchip);
+
+	if (of_property_read_u32(pdev->dev.of_node, "ngpios", &ngpios)) {
+		dev_err(&pdev->dev, "Missing ngpios OF property\n");
+		return -ENODEV;
+	}
+
+	id = of_alias_get_id(pdev->dev.of_node, "gpio");
+	if (id < 0) {
+		dev_err(&pdev->dev, "Couldn't get OF id\n");
+		return id;
+	}
+
+	mvchip->clk = devm_clk_get(&pdev->dev, NULL);
+	/* Not all SoCs require a clock.*/
+	if (!IS_ERR(mvchip->clk))
+		clk_prepare_enable(mvchip->clk);
+
+	mvchip->soc_variant = soc_variant;
+	mvchip->chip.label = dev_name(&pdev->dev);
+	mvchip->chip.parent = &pdev->dev;
+	mvchip->chip.request = gpiochip_generic_request;
+	mvchip->chip.free = gpiochip_generic_free;
+	mvchip->chip.get_direction = mvebu_gpio_get_direction;
+	mvchip->chip.direction_input = mvebu_gpio_direction_input;
+	mvchip->chip.get = mvebu_gpio_get;
+	mvchip->chip.direction_output = mvebu_gpio_direction_output;
+	mvchip->chip.set = mvebu_gpio_set;
+	if (have_irqs)
+		mvchip->chip.to_irq = mvebu_gpio_to_irq;
+	mvchip->chip.base = id * MVEBU_MAX_GPIO_PER_BANK;
+	mvchip->chip.ngpio = ngpios;
+	mvchip->chip.can_sleep = false;
+	mvchip->chip.of_node = np;
+	mvchip->chip.dbg_show = mvebu_gpio_dbg_show;
+
+	if (soc_variant == MVEBU_GPIO_SOC_VARIANT_A8K)
+		err = mvebu_gpio_probe_syscon(pdev, mvchip);
+	else
+		err = mvebu_gpio_probe_raw(pdev, mvchip);
+
+	if (err)
+		return err;
+
+	/*
+	 * Mask and clear GPIO interrupts.
+	 */
+	switch (soc_variant) {
+	case MVEBU_GPIO_SOC_VARIANT_ORION:
+	case MVEBU_GPIO_SOC_VARIANT_A8K:
+		regmap_write(mvchip->regs,
+			     GPIO_EDGE_CAUSE_OFF + mvchip->offset, 0);
+		regmap_write(mvchip->regs,
+			     GPIO_EDGE_MASK_OFF + mvchip->offset, 0);
+		regmap_write(mvchip->regs,
+			     GPIO_LEVEL_MASK_OFF + mvchip->offset, 0);
+		break;
+	case MVEBU_GPIO_SOC_VARIANT_MV78200:
+		regmap_write(mvchip->regs, GPIO_EDGE_CAUSE_OFF, 0);
+		for (cpu = 0; cpu < 2; cpu++) {
+			regmap_write(mvchip->regs,
+				     GPIO_EDGE_MASK_MV78200_OFF(cpu), 0);
+			regmap_write(mvchip->regs,
+				     GPIO_LEVEL_MASK_MV78200_OFF(cpu), 0);
+		}
+		break;
+	case MVEBU_GPIO_SOC_VARIANT_ARMADAXP:
+		regmap_write(mvchip->regs, GPIO_EDGE_CAUSE_OFF, 0);
+		regmap_write(mvchip->regs, GPIO_EDGE_MASK_OFF, 0);
+		regmap_write(mvchip->regs, GPIO_LEVEL_MASK_OFF, 0);
+		for (cpu = 0; cpu < 4; cpu++) {
+			regmap_write(mvchip->percpu_regs,
+				     GPIO_EDGE_CAUSE_ARMADAXP_OFF(cpu), 0);
+			regmap_write(mvchip->percpu_regs,
+				     GPIO_EDGE_MASK_ARMADAXP_OFF(cpu), 0);
+			regmap_write(mvchip->percpu_regs,
+				     GPIO_LEVEL_MASK_ARMADAXP_OFF(cpu), 0);
+		}
+		break;
+	default:
+		BUG();
+	}
+
+	devm_gpiochip_add_data(&pdev->dev, &mvchip->chip, mvchip);
+
+	/* Some MVEBU SoCs have simple PWM support for GPIO lines */
+	if (IS_ENABLED(CONFIG_PWM)) {
+		err = mvebu_pwm_probe(pdev, mvchip, id);
+		if (err)
+			return err;
+	}
+
+	/* Some gpio controllers do not provide irq support */
+	if (!have_irqs)
+		return 0;
+
+	mvchip->domain =
+	    irq_domain_add_linear(np, ngpios, &irq_generic_chip_ops, NULL);
+	if (!mvchip->domain) {
+		dev_err(&pdev->dev, "couldn't allocate irq domain %s (DT).\n",
+			mvchip->chip.label);
+		err = -ENODEV;
+		goto err_pwm;
+	}
+
+	err = irq_alloc_domain_generic_chips(
+	    mvchip->domain, ngpios, 2, np->name, handle_level_irq,
+	    IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_LEVEL, 0, 0);
+	if (err) {
+		dev_err(&pdev->dev, "couldn't allocate irq chips %s (DT).\n",
+			mvchip->chip.label);
+		goto err_domain;
+	}
+
+	/*
+	 * NOTE: The common accessors cannot be used because of the percpu
+	 * access to the mask registers
+	 */
+	gc = irq_get_domain_generic_chip(mvchip->domain, 0);
+	gc->private = mvchip;
+	ct = &gc->chip_types[0];
+	ct->type = IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW;
+	ct->chip.irq_mask = mvebu_gpio_level_irq_mask;
+	ct->chip.irq_unmask = mvebu_gpio_level_irq_unmask;
+	ct->chip.irq_set_type = mvebu_gpio_irq_set_type;
+	ct->chip.name = mvchip->chip.label;
+
+	ct = &gc->chip_types[1];
+	ct->type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
+	ct->chip.irq_ack = mvebu_gpio_irq_ack;
+	ct->chip.irq_mask = mvebu_gpio_edge_irq_mask;
+	ct->chip.irq_unmask = mvebu_gpio_edge_irq_unmask;
+	ct->chip.irq_set_type = mvebu_gpio_irq_set_type;
+	ct->handler = handle_edge_irq;
+	ct->chip.name = mvchip->chip.label;
+
+	/*
+	 * Setup the interrupt handlers. Each chip can have up to 4
+	 * interrupt handlers, with each handler dealing with 8 GPIO
+	 * pins.
+	 */
+	for (i = 0; i < 4; i++) {
+		int irq = platform_get_irq_optional(pdev, i);
+
+		if (irq < 0)
+			continue;
+		irq_set_chained_handler_and_data(irq, mvebu_gpio_irq_handler,
+						 mvchip);
+	}
+
+	return 0;
+
+err_domain:
+	irq_domain_remove(mvchip->domain);
+err_pwm:
+	pwmchip_remove(&mvchip->mvpwm->chip);
+
+	return err;
+}
+
+static struct platform_driver mvebu_gpio_driver = {
+	.driver		= {
+		.name		= "mvebu-gpio",
+		.of_match_table = mvebu_gpio_of_match,
+	},
+	.probe		= mvebu_gpio_probe,
+	.suspend        = mvebu_gpio_suspend,
+	.resume         = mvebu_gpio_resume,
+};
+builtin_platform_driver(mvebu_gpio_driver);
diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c
new file mode 100644
index 000000000..0d5a9fee3
--- /dev/null
+++ b/drivers/gpio/gpio-mxc.c
@@ -0,0 +1,612 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de>
+// Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+//
+// Based on code from Freescale Semiconductor,
+// Authors: Daniel Mack, Juergen Beisert.
+// Copyright (C) 2004-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/syscore_ops.h>
+#include <linux/gpio/driver.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/bug.h>
+
+enum mxc_gpio_hwtype {
+	IMX1_GPIO,	/* runs on i.mx1 */
+	IMX21_GPIO,	/* runs on i.mx21 and i.mx27 */
+	IMX31_GPIO,	/* runs on i.mx31 */
+	IMX35_GPIO,	/* runs on all other i.mx */
+};
+
+/* device type dependent stuff */
+struct mxc_gpio_hwdata {
+	unsigned dr_reg;
+	unsigned gdir_reg;
+	unsigned psr_reg;
+	unsigned icr1_reg;
+	unsigned icr2_reg;
+	unsigned imr_reg;
+	unsigned isr_reg;
+	int edge_sel_reg;
+	unsigned low_level;
+	unsigned high_level;
+	unsigned rise_edge;
+	unsigned fall_edge;
+};
+
+struct mxc_gpio_reg_saved {
+	u32 icr1;
+	u32 icr2;
+	u32 imr;
+	u32 gdir;
+	u32 edge_sel;
+	u32 dr;
+};
+
+struct mxc_gpio_port {
+	struct list_head node;
+	void __iomem *base;
+	struct clk *clk;
+	int irq;
+	int irq_high;
+	struct irq_domain *domain;
+	struct gpio_chip gc;
+	struct device *dev;
+	u32 both_edges;
+	struct mxc_gpio_reg_saved gpio_saved_reg;
+	bool power_off;
+};
+
+static struct mxc_gpio_hwdata imx1_imx21_gpio_hwdata = {
+	.dr_reg		= 0x1c,
+	.gdir_reg	= 0x00,
+	.psr_reg	= 0x24,
+	.icr1_reg	= 0x28,
+	.icr2_reg	= 0x2c,
+	.imr_reg	= 0x30,
+	.isr_reg	= 0x34,
+	.edge_sel_reg	= -EINVAL,
+	.low_level	= 0x03,
+	.high_level	= 0x02,
+	.rise_edge	= 0x00,
+	.fall_edge	= 0x01,
+};
+
+static struct mxc_gpio_hwdata imx31_gpio_hwdata = {
+	.dr_reg		= 0x00,
+	.gdir_reg	= 0x04,
+	.psr_reg	= 0x08,
+	.icr1_reg	= 0x0c,
+	.icr2_reg	= 0x10,
+	.imr_reg	= 0x14,
+	.isr_reg	= 0x18,
+	.edge_sel_reg	= -EINVAL,
+	.low_level	= 0x00,
+	.high_level	= 0x01,
+	.rise_edge	= 0x02,
+	.fall_edge	= 0x03,
+};
+
+static struct mxc_gpio_hwdata imx35_gpio_hwdata = {
+	.dr_reg		= 0x00,
+	.gdir_reg	= 0x04,
+	.psr_reg	= 0x08,
+	.icr1_reg	= 0x0c,
+	.icr2_reg	= 0x10,
+	.imr_reg	= 0x14,
+	.isr_reg	= 0x18,
+	.edge_sel_reg	= 0x1c,
+	.low_level	= 0x00,
+	.high_level	= 0x01,
+	.rise_edge	= 0x02,
+	.fall_edge	= 0x03,
+};
+
+static enum mxc_gpio_hwtype mxc_gpio_hwtype;
+static struct mxc_gpio_hwdata *mxc_gpio_hwdata;
+
+#define GPIO_DR			(mxc_gpio_hwdata->dr_reg)
+#define GPIO_GDIR		(mxc_gpio_hwdata->gdir_reg)
+#define GPIO_PSR		(mxc_gpio_hwdata->psr_reg)
+#define GPIO_ICR1		(mxc_gpio_hwdata->icr1_reg)
+#define GPIO_ICR2		(mxc_gpio_hwdata->icr2_reg)
+#define GPIO_IMR		(mxc_gpio_hwdata->imr_reg)
+#define GPIO_ISR		(mxc_gpio_hwdata->isr_reg)
+#define GPIO_EDGE_SEL		(mxc_gpio_hwdata->edge_sel_reg)
+
+#define GPIO_INT_LOW_LEV	(mxc_gpio_hwdata->low_level)
+#define GPIO_INT_HIGH_LEV	(mxc_gpio_hwdata->high_level)
+#define GPIO_INT_RISE_EDGE	(mxc_gpio_hwdata->rise_edge)
+#define GPIO_INT_FALL_EDGE	(mxc_gpio_hwdata->fall_edge)
+#define GPIO_INT_BOTH_EDGES	0x4
+
+static const struct platform_device_id mxc_gpio_devtype[] = {
+	{
+		.name = "imx1-gpio",
+		.driver_data = IMX1_GPIO,
+	}, {
+		.name = "imx21-gpio",
+		.driver_data = IMX21_GPIO,
+	}, {
+		.name = "imx31-gpio",
+		.driver_data = IMX31_GPIO,
+	}, {
+		.name = "imx35-gpio",
+		.driver_data = IMX35_GPIO,
+	}, {
+		/* sentinel */
+	}
+};
+
+static const struct of_device_id mxc_gpio_dt_ids[] = {
+	{ .compatible = "fsl,imx1-gpio", .data = &mxc_gpio_devtype[IMX1_GPIO], },
+	{ .compatible = "fsl,imx21-gpio", .data = &mxc_gpio_devtype[IMX21_GPIO], },
+	{ .compatible = "fsl,imx31-gpio", .data = &mxc_gpio_devtype[IMX31_GPIO], },
+	{ .compatible = "fsl,imx35-gpio", .data = &mxc_gpio_devtype[IMX35_GPIO], },
+	{ .compatible = "fsl,imx7d-gpio", .data = &mxc_gpio_devtype[IMX35_GPIO], },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mxc_gpio_dt_ids);
+
+/*
+ * MX2 has one interrupt *for all* gpio ports. The list is used
+ * to save the references to all ports, so that mx2_gpio_irq_handler
+ * can walk through all interrupt status registers.
+ */
+static LIST_HEAD(mxc_gpio_ports);
+
+/* Note: This driver assumes 32 GPIOs are handled in one register */
+
+static int gpio_set_irq_type(struct irq_data *d, u32 type)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	struct mxc_gpio_port *port = gc->private;
+	u32 bit, val;
+	u32 gpio_idx = d->hwirq;
+	int edge;
+	void __iomem *reg = port->base;
+
+	port->both_edges &= ~(1 << gpio_idx);
+	switch (type) {
+	case IRQ_TYPE_EDGE_RISING:
+		edge = GPIO_INT_RISE_EDGE;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		edge = GPIO_INT_FALL_EDGE;
+		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		if (GPIO_EDGE_SEL >= 0) {
+			edge = GPIO_INT_BOTH_EDGES;
+		} else {
+			val = port->gc.get(&port->gc, gpio_idx);
+			if (val) {
+				edge = GPIO_INT_LOW_LEV;
+				pr_debug("mxc: set GPIO %d to low trigger\n", gpio_idx);
+			} else {
+				edge = GPIO_INT_HIGH_LEV;
+				pr_debug("mxc: set GPIO %d to high trigger\n", gpio_idx);
+			}
+			port->both_edges |= 1 << gpio_idx;
+		}
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		edge = GPIO_INT_LOW_LEV;
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		edge = GPIO_INT_HIGH_LEV;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (GPIO_EDGE_SEL >= 0) {
+		val = readl(port->base + GPIO_EDGE_SEL);
+		if (edge == GPIO_INT_BOTH_EDGES)
+			writel(val | (1 << gpio_idx),
+				port->base + GPIO_EDGE_SEL);
+		else
+			writel(val & ~(1 << gpio_idx),
+				port->base + GPIO_EDGE_SEL);
+	}
+
+	if (edge != GPIO_INT_BOTH_EDGES) {
+		reg += GPIO_ICR1 + ((gpio_idx & 0x10) >> 2); /* lower or upper register */
+		bit = gpio_idx & 0xf;
+		val = readl(reg) & ~(0x3 << (bit << 1));
+		writel(val | (edge << (bit << 1)), reg);
+	}
+
+	writel(1 << gpio_idx, port->base + GPIO_ISR);
+
+	return port->gc.direction_input(&port->gc, gpio_idx);
+}
+
+static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio)
+{
+	void __iomem *reg = port->base;
+	u32 bit, val;
+	int edge;
+
+	reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */
+	bit = gpio & 0xf;
+	val = readl(reg);
+	edge = (val >> (bit << 1)) & 3;
+	val &= ~(0x3 << (bit << 1));
+	if (edge == GPIO_INT_HIGH_LEV) {
+		edge = GPIO_INT_LOW_LEV;
+		pr_debug("mxc: switch GPIO %d to low trigger\n", gpio);
+	} else if (edge == GPIO_INT_LOW_LEV) {
+		edge = GPIO_INT_HIGH_LEV;
+		pr_debug("mxc: switch GPIO %d to high trigger\n", gpio);
+	} else {
+		pr_err("mxc: invalid configuration for GPIO %d: %x\n",
+		       gpio, edge);
+		return;
+	}
+	writel(val | (edge << (bit << 1)), reg);
+}
+
+/* handle 32 interrupts in one status register */
+static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat)
+{
+	while (irq_stat != 0) {
+		int irqoffset = fls(irq_stat) - 1;
+
+		if (port->both_edges & (1 << irqoffset))
+			mxc_flip_edge(port, irqoffset);
+
+		generic_handle_irq(irq_find_mapping(port->domain, irqoffset));
+
+		irq_stat &= ~(1 << irqoffset);
+	}
+}
+
+/* MX1 and MX3 has one interrupt *per* gpio port */
+static void mx3_gpio_irq_handler(struct irq_desc *desc)
+{
+	u32 irq_stat;
+	struct mxc_gpio_port *port = irq_desc_get_handler_data(desc);
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+
+	chained_irq_enter(chip, desc);
+
+	irq_stat = readl(port->base + GPIO_ISR) & readl(port->base + GPIO_IMR);
+
+	mxc_gpio_irq_handler(port, irq_stat);
+
+	chained_irq_exit(chip, desc);
+}
+
+/* MX2 has one interrupt *for all* gpio ports */
+static void mx2_gpio_irq_handler(struct irq_desc *desc)
+{
+	u32 irq_msk, irq_stat;
+	struct mxc_gpio_port *port;
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+
+	chained_irq_enter(chip, desc);
+
+	/* walk through all interrupt status registers */
+	list_for_each_entry(port, &mxc_gpio_ports, node) {
+		irq_msk = readl(port->base + GPIO_IMR);
+		if (!irq_msk)
+			continue;
+
+		irq_stat = readl(port->base + GPIO_ISR) & irq_msk;
+		if (irq_stat)
+			mxc_gpio_irq_handler(port, irq_stat);
+	}
+	chained_irq_exit(chip, desc);
+}
+
+/*
+ * Set interrupt number "irq" in the GPIO as a wake-up source.
+ * While system is running, all registered GPIO interrupts need to have
+ * wake-up enabled. When system is suspended, only selected GPIO interrupts
+ * need to have wake-up enabled.
+ * @param  irq          interrupt source number
+ * @param  enable       enable as wake-up if equal to non-zero
+ * @return       This function returns 0 on success.
+ */
+static int gpio_set_wake_irq(struct irq_data *d, u32 enable)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	struct mxc_gpio_port *port = gc->private;
+	u32 gpio_idx = d->hwirq;
+	int ret;
+
+	if (enable) {
+		if (port->irq_high && (gpio_idx >= 16))
+			ret = enable_irq_wake(port->irq_high);
+		else
+			ret = enable_irq_wake(port->irq);
+	} else {
+		if (port->irq_high && (gpio_idx >= 16))
+			ret = disable_irq_wake(port->irq_high);
+		else
+			ret = disable_irq_wake(port->irq);
+	}
+
+	return ret;
+}
+
+static int mxc_gpio_init_gc(struct mxc_gpio_port *port, int irq_base)
+{
+	struct irq_chip_generic *gc;
+	struct irq_chip_type *ct;
+	int rv;
+
+	gc = devm_irq_alloc_generic_chip(port->dev, "gpio-mxc", 1, irq_base,
+					 port->base, handle_level_irq);
+	if (!gc)
+		return -ENOMEM;
+	gc->private = port;
+
+	ct = gc->chip_types;
+	ct->chip.irq_ack = irq_gc_ack_set_bit;
+	ct->chip.irq_mask = irq_gc_mask_clr_bit;
+	ct->chip.irq_unmask = irq_gc_mask_set_bit;
+	ct->chip.irq_set_type = gpio_set_irq_type;
+	ct->chip.irq_set_wake = gpio_set_wake_irq;
+	ct->chip.flags = IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND;
+	ct->regs.ack = GPIO_ISR;
+	ct->regs.mask = GPIO_IMR;
+
+	rv = devm_irq_setup_generic_chip(port->dev, gc, IRQ_MSK(32),
+					 IRQ_GC_INIT_NESTED_LOCK,
+					 IRQ_NOREQUEST, 0);
+
+	return rv;
+}
+
+static void mxc_gpio_get_hw(struct platform_device *pdev)
+{
+	const struct of_device_id *of_id =
+			of_match_device(mxc_gpio_dt_ids, &pdev->dev);
+	enum mxc_gpio_hwtype hwtype;
+
+	if (of_id)
+		pdev->id_entry = of_id->data;
+	hwtype = pdev->id_entry->driver_data;
+
+	if (mxc_gpio_hwtype) {
+		/*
+		 * The driver works with a reasonable presupposition,
+		 * that is all gpio ports must be the same type when
+		 * running on one soc.
+		 */
+		BUG_ON(mxc_gpio_hwtype != hwtype);
+		return;
+	}
+
+	if (hwtype == IMX35_GPIO)
+		mxc_gpio_hwdata = &imx35_gpio_hwdata;
+	else if (hwtype == IMX31_GPIO)
+		mxc_gpio_hwdata = &imx31_gpio_hwdata;
+	else
+		mxc_gpio_hwdata = &imx1_imx21_gpio_hwdata;
+
+	mxc_gpio_hwtype = hwtype;
+}
+
+static int mxc_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
+{
+	struct mxc_gpio_port *port = gpiochip_get_data(gc);
+
+	return irq_find_mapping(port->domain, offset);
+}
+
+static int mxc_gpio_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct mxc_gpio_port *port;
+	int irq_count;
+	int irq_base;
+	int err;
+
+	mxc_gpio_get_hw(pdev);
+
+	port = devm_kzalloc(&pdev->dev, sizeof(*port), GFP_KERNEL);
+	if (!port)
+		return -ENOMEM;
+
+	port->dev = &pdev->dev;
+
+	port->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(port->base))
+		return PTR_ERR(port->base);
+
+	irq_count = platform_irq_count(pdev);
+	if (irq_count < 0)
+		return irq_count;
+
+	if (irq_count > 1) {
+		port->irq_high = platform_get_irq(pdev, 1);
+		if (port->irq_high < 0)
+			port->irq_high = 0;
+	}
+
+	port->irq = platform_get_irq(pdev, 0);
+	if (port->irq < 0)
+		return port->irq;
+
+	/* the controller clock is optional */
+	port->clk = devm_clk_get_optional(&pdev->dev, NULL);
+	if (IS_ERR(port->clk))
+		return PTR_ERR(port->clk);
+
+	err = clk_prepare_enable(port->clk);
+	if (err) {
+		dev_err(&pdev->dev, "Unable to enable clock.\n");
+		return err;
+	}
+
+	if (of_device_is_compatible(np, "fsl,imx7d-gpio"))
+		port->power_off = true;
+
+	/* disable the interrupt and clear the status */
+	writel(0, port->base + GPIO_IMR);
+	writel(~0, port->base + GPIO_ISR);
+
+	if (mxc_gpio_hwtype == IMX21_GPIO) {
+		/*
+		 * Setup one handler for all GPIO interrupts. Actually setting
+		 * the handler is needed only once, but doing it for every port
+		 * is more robust and easier.
+		 */
+		irq_set_chained_handler(port->irq, mx2_gpio_irq_handler);
+	} else {
+		/* setup one handler for each entry */
+		irq_set_chained_handler_and_data(port->irq,
+						 mx3_gpio_irq_handler, port);
+		if (port->irq_high > 0)
+			/* setup handler for GPIO 16 to 31 */
+			irq_set_chained_handler_and_data(port->irq_high,
+							 mx3_gpio_irq_handler,
+							 port);
+	}
+
+	err = bgpio_init(&port->gc, &pdev->dev, 4,
+			 port->base + GPIO_PSR,
+			 port->base + GPIO_DR, NULL,
+			 port->base + GPIO_GDIR, NULL,
+			 BGPIOF_READ_OUTPUT_REG_SET);
+	if (err)
+		goto out_bgio;
+
+	port->gc.request = gpiochip_generic_request;
+	port->gc.free = gpiochip_generic_free;
+	port->gc.to_irq = mxc_gpio_to_irq;
+	port->gc.base = (pdev->id < 0) ? of_alias_get_id(np, "gpio") * 32 :
+					     pdev->id * 32;
+
+	err = devm_gpiochip_add_data(&pdev->dev, &port->gc, port);
+	if (err)
+		goto out_bgio;
+
+	irq_base = devm_irq_alloc_descs(&pdev->dev, -1, 0, 32, numa_node_id());
+	if (irq_base < 0) {
+		err = irq_base;
+		goto out_bgio;
+	}
+
+	port->domain = irq_domain_add_legacy(np, 32, irq_base, 0,
+					     &irq_domain_simple_ops, NULL);
+	if (!port->domain) {
+		err = -ENODEV;
+		goto out_bgio;
+	}
+
+	/* gpio-mxc can be a generic irq chip */
+	err = mxc_gpio_init_gc(port, irq_base);
+	if (err < 0)
+		goto out_irqdomain_remove;
+
+	list_add_tail(&port->node, &mxc_gpio_ports);
+
+	platform_set_drvdata(pdev, port);
+
+	return 0;
+
+out_irqdomain_remove:
+	irq_domain_remove(port->domain);
+out_bgio:
+	clk_disable_unprepare(port->clk);
+	dev_info(&pdev->dev, "%s failed with errno %d\n", __func__, err);
+	return err;
+}
+
+static void mxc_gpio_save_regs(struct mxc_gpio_port *port)
+{
+	if (!port->power_off)
+		return;
+
+	port->gpio_saved_reg.icr1 = readl(port->base + GPIO_ICR1);
+	port->gpio_saved_reg.icr2 = readl(port->base + GPIO_ICR2);
+	port->gpio_saved_reg.imr = readl(port->base + GPIO_IMR);
+	port->gpio_saved_reg.gdir = readl(port->base + GPIO_GDIR);
+	port->gpio_saved_reg.edge_sel = readl(port->base + GPIO_EDGE_SEL);
+	port->gpio_saved_reg.dr = readl(port->base + GPIO_DR);
+}
+
+static void mxc_gpio_restore_regs(struct mxc_gpio_port *port)
+{
+	if (!port->power_off)
+		return;
+
+	writel(port->gpio_saved_reg.icr1, port->base + GPIO_ICR1);
+	writel(port->gpio_saved_reg.icr2, port->base + GPIO_ICR2);
+	writel(port->gpio_saved_reg.imr, port->base + GPIO_IMR);
+	writel(port->gpio_saved_reg.gdir, port->base + GPIO_GDIR);
+	writel(port->gpio_saved_reg.edge_sel, port->base + GPIO_EDGE_SEL);
+	writel(port->gpio_saved_reg.dr, port->base + GPIO_DR);
+}
+
+static int mxc_gpio_syscore_suspend(void)
+{
+	struct mxc_gpio_port *port;
+
+	/* walk through all ports */
+	list_for_each_entry(port, &mxc_gpio_ports, node) {
+		mxc_gpio_save_regs(port);
+		clk_disable_unprepare(port->clk);
+	}
+
+	return 0;
+}
+
+static void mxc_gpio_syscore_resume(void)
+{
+	struct mxc_gpio_port *port;
+	int ret;
+
+	/* walk through all ports */
+	list_for_each_entry(port, &mxc_gpio_ports, node) {
+		ret = clk_prepare_enable(port->clk);
+		if (ret) {
+			pr_err("mxc: failed to enable gpio clock %d\n", ret);
+			return;
+		}
+		mxc_gpio_restore_regs(port);
+	}
+}
+
+static struct syscore_ops mxc_gpio_syscore_ops = {
+	.suspend = mxc_gpio_syscore_suspend,
+	.resume = mxc_gpio_syscore_resume,
+};
+
+static struct platform_driver mxc_gpio_driver = {
+	.driver		= {
+		.name	= "gpio-mxc",
+		.of_match_table = mxc_gpio_dt_ids,
+		.suppress_bind_attrs = true,
+	},
+	.probe		= mxc_gpio_probe,
+	.id_table	= mxc_gpio_devtype,
+};
+
+static int __init gpio_mxc_init(void)
+{
+	register_syscore_ops(&mxc_gpio_syscore_ops);
+
+	return platform_driver_register(&mxc_gpio_driver);
+}
+subsys_initcall(gpio_mxc_init);
+
+MODULE_AUTHOR("Shawn Guo <shawn.guo@linaro.org>");
+MODULE_DESCRIPTION("i.MX GPIO Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/gpio-mxs.c b/drivers/gpio/gpio-mxs.c
new file mode 100644
index 000000000..c4a314c68
--- /dev/null
+++ b/drivers/gpio/gpio-mxs.c
@@ -0,0 +1,386 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de>
+// Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+//
+// Based on code from Freescale,
+// Copyright (C) 2004-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/gpio/driver.h>
+#include <linux/module.h>
+
+#define MXS_SET		0x4
+#define MXS_CLR		0x8
+
+#define PINCTRL_DOUT(p)		((is_imx23_gpio(p) ? 0x0500 : 0x0700) + (p->id) * 0x10)
+#define PINCTRL_DIN(p)		((is_imx23_gpio(p) ? 0x0600 : 0x0900) + (p->id) * 0x10)
+#define PINCTRL_DOE(p)		((is_imx23_gpio(p) ? 0x0700 : 0x0b00) + (p->id) * 0x10)
+#define PINCTRL_PIN2IRQ(p)	((is_imx23_gpio(p) ? 0x0800 : 0x1000) + (p->id) * 0x10)
+#define PINCTRL_IRQEN(p)	((is_imx23_gpio(p) ? 0x0900 : 0x1100) + (p->id) * 0x10)
+#define PINCTRL_IRQLEV(p)	((is_imx23_gpio(p) ? 0x0a00 : 0x1200) + (p->id) * 0x10)
+#define PINCTRL_IRQPOL(p)	((is_imx23_gpio(p) ? 0x0b00 : 0x1300) + (p->id) * 0x10)
+#define PINCTRL_IRQSTAT(p)	((is_imx23_gpio(p) ? 0x0c00 : 0x1400) + (p->id) * 0x10)
+
+#define GPIO_INT_FALL_EDGE	0x0
+#define GPIO_INT_LOW_LEV	0x1
+#define GPIO_INT_RISE_EDGE	0x2
+#define GPIO_INT_HIGH_LEV	0x3
+#define GPIO_INT_LEV_MASK	(1 << 0)
+#define GPIO_INT_POL_MASK	(1 << 1)
+
+enum mxs_gpio_id {
+	IMX23_GPIO,
+	IMX28_GPIO,
+};
+
+struct mxs_gpio_port {
+	void __iomem *base;
+	int id;
+	int irq;
+	struct irq_domain *domain;
+	struct gpio_chip gc;
+	struct device *dev;
+	enum mxs_gpio_id devid;
+	u32 both_edges;
+};
+
+static inline int is_imx23_gpio(struct mxs_gpio_port *port)
+{
+	return port->devid == IMX23_GPIO;
+}
+
+static inline int is_imx28_gpio(struct mxs_gpio_port *port)
+{
+	return port->devid == IMX28_GPIO;
+}
+
+/* Note: This driver assumes 32 GPIOs are handled in one register */
+
+static int mxs_gpio_set_irq_type(struct irq_data *d, unsigned int type)
+{
+	u32 val;
+	u32 pin_mask = 1 << d->hwirq;
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	struct irq_chip_type *ct = irq_data_get_chip_type(d);
+	struct mxs_gpio_port *port = gc->private;
+	void __iomem *pin_addr;
+	int edge;
+
+	if (!(ct->type & type))
+		if (irq_setup_alt_chip(d, type))
+			return -EINVAL;
+
+	port->both_edges &= ~pin_mask;
+	switch (type) {
+	case IRQ_TYPE_EDGE_BOTH:
+		val = readl(port->base + PINCTRL_DIN(port)) & pin_mask;
+		if (val)
+			edge = GPIO_INT_FALL_EDGE;
+		else
+			edge = GPIO_INT_RISE_EDGE;
+		port->both_edges |= pin_mask;
+		break;
+	case IRQ_TYPE_EDGE_RISING:
+		edge = GPIO_INT_RISE_EDGE;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		edge = GPIO_INT_FALL_EDGE;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		edge = GPIO_INT_LOW_LEV;
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		edge = GPIO_INT_HIGH_LEV;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* set level or edge */
+	pin_addr = port->base + PINCTRL_IRQLEV(port);
+	if (edge & GPIO_INT_LEV_MASK) {
+		writel(pin_mask, pin_addr + MXS_SET);
+		writel(pin_mask, port->base + PINCTRL_IRQEN(port) + MXS_SET);
+	} else {
+		writel(pin_mask, pin_addr + MXS_CLR);
+		writel(pin_mask, port->base + PINCTRL_PIN2IRQ(port) + MXS_SET);
+	}
+
+	/* set polarity */
+	pin_addr = port->base + PINCTRL_IRQPOL(port);
+	if (edge & GPIO_INT_POL_MASK)
+		writel(pin_mask, pin_addr + MXS_SET);
+	else
+		writel(pin_mask, pin_addr + MXS_CLR);
+
+	writel(pin_mask, port->base + PINCTRL_IRQSTAT(port) + MXS_CLR);
+
+	return 0;
+}
+
+static void mxs_flip_edge(struct mxs_gpio_port *port, u32 gpio)
+{
+	u32 bit, val, edge;
+	void __iomem *pin_addr;
+
+	bit = 1 << gpio;
+
+	pin_addr = port->base + PINCTRL_IRQPOL(port);
+	val = readl(pin_addr);
+	edge = val & bit;
+
+	if (edge)
+		writel(bit, pin_addr + MXS_CLR);
+	else
+		writel(bit, pin_addr + MXS_SET);
+}
+
+/* MXS has one interrupt *per* gpio port */
+static void mxs_gpio_irq_handler(struct irq_desc *desc)
+{
+	u32 irq_stat;
+	struct mxs_gpio_port *port = irq_desc_get_handler_data(desc);
+
+	desc->irq_data.chip->irq_ack(&desc->irq_data);
+
+	irq_stat = readl(port->base + PINCTRL_IRQSTAT(port)) &
+			readl(port->base + PINCTRL_IRQEN(port));
+
+	while (irq_stat != 0) {
+		int irqoffset = fls(irq_stat) - 1;
+		if (port->both_edges & (1 << irqoffset))
+			mxs_flip_edge(port, irqoffset);
+
+		generic_handle_irq(irq_find_mapping(port->domain, irqoffset));
+		irq_stat &= ~(1 << irqoffset);
+	}
+}
+
+/*
+ * Set interrupt number "irq" in the GPIO as a wake-up source.
+ * While system is running, all registered GPIO interrupts need to have
+ * wake-up enabled. When system is suspended, only selected GPIO interrupts
+ * need to have wake-up enabled.
+ * @param  irq          interrupt source number
+ * @param  enable       enable as wake-up if equal to non-zero
+ * @return       This function returns 0 on success.
+ */
+static int mxs_gpio_set_wake_irq(struct irq_data *d, unsigned int enable)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	struct mxs_gpio_port *port = gc->private;
+
+	if (enable)
+		enable_irq_wake(port->irq);
+	else
+		disable_irq_wake(port->irq);
+
+	return 0;
+}
+
+static int mxs_gpio_init_gc(struct mxs_gpio_port *port, int irq_base)
+{
+	struct irq_chip_generic *gc;
+	struct irq_chip_type *ct;
+	int rv;
+
+	gc = devm_irq_alloc_generic_chip(port->dev, "gpio-mxs", 2, irq_base,
+					 port->base, handle_level_irq);
+	if (!gc)
+		return -ENOMEM;
+
+	gc->private = port;
+
+	ct = &gc->chip_types[0];
+	ct->type = IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW;
+	ct->chip.irq_ack = irq_gc_ack_set_bit;
+	ct->chip.irq_mask = irq_gc_mask_disable_reg;
+	ct->chip.irq_unmask = irq_gc_unmask_enable_reg;
+	ct->chip.irq_set_type = mxs_gpio_set_irq_type;
+	ct->chip.irq_set_wake = mxs_gpio_set_wake_irq;
+	ct->chip.flags = IRQCHIP_SET_TYPE_MASKED;
+	ct->regs.ack = PINCTRL_IRQSTAT(port) + MXS_CLR;
+	ct->regs.enable = PINCTRL_PIN2IRQ(port) + MXS_SET;
+	ct->regs.disable = PINCTRL_PIN2IRQ(port) + MXS_CLR;
+
+	ct = &gc->chip_types[1];
+	ct->type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
+	ct->chip.irq_ack = irq_gc_ack_set_bit;
+	ct->chip.irq_mask = irq_gc_mask_disable_reg;
+	ct->chip.irq_unmask = irq_gc_unmask_enable_reg;
+	ct->chip.irq_set_type = mxs_gpio_set_irq_type;
+	ct->chip.irq_set_wake = mxs_gpio_set_wake_irq;
+	ct->chip.flags = IRQCHIP_SET_TYPE_MASKED;
+	ct->regs.ack = PINCTRL_IRQSTAT(port) + MXS_CLR;
+	ct->regs.enable = PINCTRL_IRQEN(port) + MXS_SET;
+	ct->regs.disable = PINCTRL_IRQEN(port) + MXS_CLR;
+	ct->handler = handle_level_irq;
+
+	rv = devm_irq_setup_generic_chip(port->dev, gc, IRQ_MSK(32),
+					 IRQ_GC_INIT_NESTED_LOCK,
+					 IRQ_NOREQUEST, 0);
+
+	return rv;
+}
+
+static int mxs_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
+{
+	struct mxs_gpio_port *port = gpiochip_get_data(gc);
+
+	return irq_find_mapping(port->domain, offset);
+}
+
+static int mxs_gpio_get_direction(struct gpio_chip *gc, unsigned offset)
+{
+	struct mxs_gpio_port *port = gpiochip_get_data(gc);
+	u32 mask = 1 << offset;
+	u32 dir;
+
+	dir = readl(port->base + PINCTRL_DOE(port));
+	if (dir & mask)
+		return GPIO_LINE_DIRECTION_OUT;
+
+	return GPIO_LINE_DIRECTION_IN;
+}
+
+static const struct platform_device_id mxs_gpio_ids[] = {
+	{
+		.name = "imx23-gpio",
+		.driver_data = IMX23_GPIO,
+	}, {
+		.name = "imx28-gpio",
+		.driver_data = IMX28_GPIO,
+	}, {
+		/* sentinel */
+	}
+};
+MODULE_DEVICE_TABLE(platform, mxs_gpio_ids);
+
+static const struct of_device_id mxs_gpio_dt_ids[] = {
+	{ .compatible = "fsl,imx23-gpio", .data = (void *) IMX23_GPIO, },
+	{ .compatible = "fsl,imx28-gpio", .data = (void *) IMX28_GPIO, },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mxs_gpio_dt_ids);
+
+static int mxs_gpio_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct device_node *parent;
+	static void __iomem *base;
+	struct mxs_gpio_port *port;
+	int irq_base;
+	int err;
+
+	port = devm_kzalloc(&pdev->dev, sizeof(*port), GFP_KERNEL);
+	if (!port)
+		return -ENOMEM;
+
+	port->id = of_alias_get_id(np, "gpio");
+	if (port->id < 0)
+		return port->id;
+	port->devid = (enum mxs_gpio_id)of_device_get_match_data(&pdev->dev);
+	port->dev = &pdev->dev;
+	port->irq = platform_get_irq(pdev, 0);
+	if (port->irq < 0)
+		return port->irq;
+
+	/*
+	 * map memory region only once, as all the gpio ports
+	 * share the same one
+	 */
+	if (!base) {
+		parent = of_get_parent(np);
+		base = of_iomap(parent, 0);
+		of_node_put(parent);
+		if (!base)
+			return -EADDRNOTAVAIL;
+	}
+	port->base = base;
+
+	/* initially disable the interrupts */
+	writel(0, port->base + PINCTRL_PIN2IRQ(port));
+	writel(0, port->base + PINCTRL_IRQEN(port));
+
+	/* clear address has to be used to clear IRQSTAT bits */
+	writel(~0U, port->base + PINCTRL_IRQSTAT(port) + MXS_CLR);
+
+	irq_base = devm_irq_alloc_descs(&pdev->dev, -1, 0, 32, numa_node_id());
+	if (irq_base < 0) {
+		err = irq_base;
+		goto out_iounmap;
+	}
+
+	port->domain = irq_domain_add_legacy(np, 32, irq_base, 0,
+					     &irq_domain_simple_ops, NULL);
+	if (!port->domain) {
+		err = -ENODEV;
+		goto out_iounmap;
+	}
+
+	/* gpio-mxs can be a generic irq chip */
+	err = mxs_gpio_init_gc(port, irq_base);
+	if (err < 0)
+		goto out_irqdomain_remove;
+
+	/* setup one handler for each entry */
+	irq_set_chained_handler_and_data(port->irq, mxs_gpio_irq_handler,
+					 port);
+
+	err = bgpio_init(&port->gc, &pdev->dev, 4,
+			 port->base + PINCTRL_DIN(port),
+			 port->base + PINCTRL_DOUT(port) + MXS_SET,
+			 port->base + PINCTRL_DOUT(port) + MXS_CLR,
+			 port->base + PINCTRL_DOE(port), NULL, 0);
+	if (err)
+		goto out_irqdomain_remove;
+
+	port->gc.to_irq = mxs_gpio_to_irq;
+	port->gc.get_direction = mxs_gpio_get_direction;
+	port->gc.base = port->id * 32;
+
+	err = gpiochip_add_data(&port->gc, port);
+	if (err)
+		goto out_irqdomain_remove;
+
+	return 0;
+
+out_irqdomain_remove:
+	irq_domain_remove(port->domain);
+out_iounmap:
+	iounmap(port->base);
+	return err;
+}
+
+static struct platform_driver mxs_gpio_driver = {
+	.driver		= {
+		.name	= "gpio-mxs",
+		.of_match_table = mxs_gpio_dt_ids,
+		.suppress_bind_attrs = true,
+	},
+	.probe		= mxs_gpio_probe,
+	.id_table	= mxs_gpio_ids,
+};
+
+static int __init mxs_gpio_init(void)
+{
+	return platform_driver_register(&mxs_gpio_driver);
+}
+postcore_initcall(mxs_gpio_init);
+
+MODULE_AUTHOR("Freescale Semiconductor, "
+	      "Daniel Mack <danielncaiaq.de>, "
+	      "Juergen Beisert <kernel@pengutronix.de>");
+MODULE_DESCRIPTION("Freescale MXS GPIO");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/gpio-octeon.c b/drivers/gpio/gpio-octeon.c
new file mode 100644
index 000000000..afb0e8a79
--- /dev/null
+++ b/drivers/gpio/gpio-octeon.c
@@ -0,0 +1,137 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2011, 2012 Cavium Inc.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/gpio/driver.h>
+#include <linux/io.h>
+
+#include <asm/octeon/octeon.h>
+#include <asm/octeon/cvmx-gpio-defs.h>
+
+#define RX_DAT 0x80
+#define TX_SET 0x88
+#define TX_CLEAR 0x90
+/*
+ * The address offset of the GPIO configuration register for a given
+ * line.
+ */
+static unsigned int bit_cfg_reg(unsigned int offset)
+{
+	/*
+	 * The register stride is 8, with a discontinuity after the
+	 * first 16.
+	 */
+	if (offset < 16)
+		return 8 * offset;
+	else
+		return 8 * (offset - 16) + 0x100;
+}
+
+struct octeon_gpio {
+	struct gpio_chip chip;
+	u64 register_base;
+};
+
+static int octeon_gpio_dir_in(struct gpio_chip *chip, unsigned offset)
+{
+	struct octeon_gpio *gpio = gpiochip_get_data(chip);
+
+	cvmx_write_csr(gpio->register_base + bit_cfg_reg(offset), 0);
+	return 0;
+}
+
+static void octeon_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct octeon_gpio *gpio = gpiochip_get_data(chip);
+	u64 mask = 1ull << offset;
+	u64 reg = gpio->register_base + (value ? TX_SET : TX_CLEAR);
+	cvmx_write_csr(reg, mask);
+}
+
+static int octeon_gpio_dir_out(struct gpio_chip *chip, unsigned offset,
+			       int value)
+{
+	struct octeon_gpio *gpio = gpiochip_get_data(chip);
+	union cvmx_gpio_bit_cfgx cfgx;
+
+	octeon_gpio_set(chip, offset, value);
+
+	cfgx.u64 = 0;
+	cfgx.s.tx_oe = 1;
+
+	cvmx_write_csr(gpio->register_base + bit_cfg_reg(offset), cfgx.u64);
+	return 0;
+}
+
+static int octeon_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct octeon_gpio *gpio = gpiochip_get_data(chip);
+	u64 read_bits = cvmx_read_csr(gpio->register_base + RX_DAT);
+
+	return ((1ull << offset) & read_bits) != 0;
+}
+
+static int octeon_gpio_probe(struct platform_device *pdev)
+{
+	struct octeon_gpio *gpio;
+	struct gpio_chip *chip;
+	void __iomem *reg_base;
+	int err = 0;
+
+	gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
+	if (!gpio)
+		return -ENOMEM;
+	chip = &gpio->chip;
+
+	reg_base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(reg_base))
+		return PTR_ERR(reg_base);
+
+	gpio->register_base = (u64)reg_base;
+	pdev->dev.platform_data = chip;
+	chip->label = "octeon-gpio";
+	chip->parent = &pdev->dev;
+	chip->owner = THIS_MODULE;
+	chip->base = 0;
+	chip->can_sleep = false;
+	chip->ngpio = 20;
+	chip->direction_input = octeon_gpio_dir_in;
+	chip->get = octeon_gpio_get;
+	chip->direction_output = octeon_gpio_dir_out;
+	chip->set = octeon_gpio_set;
+	err = devm_gpiochip_add_data(&pdev->dev, chip, gpio);
+	if (err)
+		return err;
+
+	dev_info(&pdev->dev, "OCTEON GPIO driver probed.\n");
+	return 0;
+}
+
+static const struct of_device_id octeon_gpio_match[] = {
+	{
+		.compatible = "cavium,octeon-3860-gpio",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, octeon_gpio_match);
+
+static struct platform_driver octeon_gpio_driver = {
+	.driver = {
+		.name		= "octeon_gpio",
+		.of_match_table = octeon_gpio_match,
+	},
+	.probe		= octeon_gpio_probe,
+};
+
+module_platform_driver(octeon_gpio_driver);
+
+MODULE_DESCRIPTION("Cavium Inc. OCTEON GPIO Driver");
+MODULE_AUTHOR("David Daney");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
new file mode 100644
index 000000000..a7e8ed519
--- /dev/null
+++ b/drivers/gpio/gpio-omap.c
@@ -0,0 +1,1594 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Support functions for OMAP GPIO
+ *
+ * Copyright (C) 2003-2005 Nokia Corporation
+ * Written by Juha Yrjölä <juha.yrjola@nokia.com>
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/syscore_ops.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/cpu_pm.h>
+#include <linux/device.h>
+#include <linux/pm_runtime.h>
+#include <linux/pm.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/gpio/driver.h>
+#include <linux/bitops.h>
+#include <linux/platform_data/gpio-omap.h>
+
+#define OMAP4_GPIO_DEBOUNCINGTIME_MASK 0xFF
+
+struct gpio_regs {
+	u32 sysconfig;
+	u32 irqenable1;
+	u32 irqenable2;
+	u32 wake_en;
+	u32 ctrl;
+	u32 oe;
+	u32 leveldetect0;
+	u32 leveldetect1;
+	u32 risingdetect;
+	u32 fallingdetect;
+	u32 dataout;
+	u32 debounce;
+	u32 debounce_en;
+};
+
+struct gpio_bank {
+	void __iomem *base;
+	const struct omap_gpio_reg_offs *regs;
+
+	int irq;
+	u32 non_wakeup_gpios;
+	u32 enabled_non_wakeup_gpios;
+	struct gpio_regs context;
+	u32 saved_datain;
+	u32 level_mask;
+	u32 toggle_mask;
+	raw_spinlock_t lock;
+	raw_spinlock_t wa_lock;
+	struct gpio_chip chip;
+	struct clk *dbck;
+	struct notifier_block nb;
+	unsigned int is_suspended:1;
+	unsigned int needs_resume:1;
+	u32 mod_usage;
+	u32 irq_usage;
+	u32 dbck_enable_mask;
+	bool dbck_enabled;
+	bool is_mpuio;
+	bool dbck_flag;
+	bool loses_context;
+	bool context_valid;
+	int stride;
+	u32 width;
+	int context_loss_count;
+
+	void (*set_dataout)(struct gpio_bank *bank, unsigned gpio, int enable);
+	int (*get_context_loss_count)(struct device *dev);
+};
+
+#define GPIO_MOD_CTRL_BIT	BIT(0)
+
+#define BANK_USED(bank) (bank->mod_usage || bank->irq_usage)
+#define LINE_USED(line, offset) (line & (BIT(offset)))
+
+static void omap_gpio_unmask_irq(struct irq_data *d);
+
+static inline struct gpio_bank *omap_irq_data_get_bank(struct irq_data *d)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(d);
+	return gpiochip_get_data(chip);
+}
+
+static inline u32 omap_gpio_rmw(void __iomem *reg, u32 mask, bool set)
+{
+	u32 val = readl_relaxed(reg);
+
+	if (set)
+		val |= mask;
+	else
+		val &= ~mask;
+
+	writel_relaxed(val, reg);
+
+	return val;
+}
+
+static void omap_set_gpio_direction(struct gpio_bank *bank, int gpio,
+				    int is_input)
+{
+	bank->context.oe = omap_gpio_rmw(bank->base + bank->regs->direction,
+					 BIT(gpio), is_input);
+}
+
+
+/* set data out value using dedicate set/clear register */
+static void omap_set_gpio_dataout_reg(struct gpio_bank *bank, unsigned offset,
+				      int enable)
+{
+	void __iomem *reg = bank->base;
+	u32 l = BIT(offset);
+
+	if (enable) {
+		reg += bank->regs->set_dataout;
+		bank->context.dataout |= l;
+	} else {
+		reg += bank->regs->clr_dataout;
+		bank->context.dataout &= ~l;
+	}
+
+	writel_relaxed(l, reg);
+}
+
+/* set data out value using mask register */
+static void omap_set_gpio_dataout_mask(struct gpio_bank *bank, unsigned offset,
+				       int enable)
+{
+	bank->context.dataout = omap_gpio_rmw(bank->base + bank->regs->dataout,
+					      BIT(offset), enable);
+}
+
+static inline void omap_gpio_dbck_enable(struct gpio_bank *bank)
+{
+	if (bank->dbck_enable_mask && !bank->dbck_enabled) {
+		clk_enable(bank->dbck);
+		bank->dbck_enabled = true;
+
+		writel_relaxed(bank->dbck_enable_mask,
+			     bank->base + bank->regs->debounce_en);
+	}
+}
+
+static inline void omap_gpio_dbck_disable(struct gpio_bank *bank)
+{
+	if (bank->dbck_enable_mask && bank->dbck_enabled) {
+		/*
+		 * Disable debounce before cutting it's clock. If debounce is
+		 * enabled but the clock is not, GPIO module seems to be unable
+		 * to detect events and generate interrupts at least on OMAP3.
+		 */
+		writel_relaxed(0, bank->base + bank->regs->debounce_en);
+
+		clk_disable(bank->dbck);
+		bank->dbck_enabled = false;
+	}
+}
+
+/**
+ * omap2_set_gpio_debounce - low level gpio debounce time
+ * @bank: the gpio bank we're acting upon
+ * @offset: the gpio number on this @bank
+ * @debounce: debounce time to use
+ *
+ * OMAP's debounce time is in 31us steps
+ *   <debounce time> = (GPIO_DEBOUNCINGTIME[7:0].DEBOUNCETIME + 1) x 31
+ * so we need to convert and round up to the closest unit.
+ *
+ * Return: 0 on success, negative error otherwise.
+ */
+static int omap2_set_gpio_debounce(struct gpio_bank *bank, unsigned offset,
+				   unsigned debounce)
+{
+	u32			val;
+	u32			l;
+	bool			enable = !!debounce;
+
+	if (!bank->dbck_flag)
+		return -ENOTSUPP;
+
+	if (enable) {
+		debounce = DIV_ROUND_UP(debounce, 31) - 1;
+		if ((debounce & OMAP4_GPIO_DEBOUNCINGTIME_MASK) != debounce)
+			return -EINVAL;
+	}
+
+	l = BIT(offset);
+
+	clk_enable(bank->dbck);
+	writel_relaxed(debounce, bank->base + bank->regs->debounce);
+
+	val = omap_gpio_rmw(bank->base + bank->regs->debounce_en, l, enable);
+	bank->dbck_enable_mask = val;
+
+	clk_disable(bank->dbck);
+	/*
+	 * Enable debounce clock per module.
+	 * This call is mandatory because in omap_gpio_request() when
+	 * *_runtime_get_sync() is called,  _gpio_dbck_enable() within
+	 * runtime callbck fails to turn on dbck because dbck_enable_mask
+	 * used within _gpio_dbck_enable() is still not initialized at
+	 * that point. Therefore we have to enable dbck here.
+	 */
+	omap_gpio_dbck_enable(bank);
+	if (bank->dbck_enable_mask) {
+		bank->context.debounce = debounce;
+		bank->context.debounce_en = val;
+	}
+
+	return 0;
+}
+
+/**
+ * omap_clear_gpio_debounce - clear debounce settings for a gpio
+ * @bank: the gpio bank we're acting upon
+ * @offset: the gpio number on this @bank
+ *
+ * If a gpio is using debounce, then clear the debounce enable bit and if
+ * this is the only gpio in this bank using debounce, then clear the debounce
+ * time too. The debounce clock will also be disabled when calling this function
+ * if this is the only gpio in the bank using debounce.
+ */
+static void omap_clear_gpio_debounce(struct gpio_bank *bank, unsigned offset)
+{
+	u32 gpio_bit = BIT(offset);
+
+	if (!bank->dbck_flag)
+		return;
+
+	if (!(bank->dbck_enable_mask & gpio_bit))
+		return;
+
+	bank->dbck_enable_mask &= ~gpio_bit;
+	bank->context.debounce_en &= ~gpio_bit;
+        writel_relaxed(bank->context.debounce_en,
+		     bank->base + bank->regs->debounce_en);
+
+	if (!bank->dbck_enable_mask) {
+		bank->context.debounce = 0;
+		writel_relaxed(bank->context.debounce, bank->base +
+			     bank->regs->debounce);
+		clk_disable(bank->dbck);
+		bank->dbck_enabled = false;
+	}
+}
+
+/*
+ * Off mode wake-up capable GPIOs in bank(s) that are in the wakeup domain.
+ * See TRM section for GPIO for "Wake-Up Generation" for the list of GPIOs
+ * in wakeup domain. If bank->non_wakeup_gpios is not configured, assume none
+ * are capable waking up the system from off mode.
+ */
+static bool omap_gpio_is_off_wakeup_capable(struct gpio_bank *bank, u32 gpio_mask)
+{
+	u32 no_wake = bank->non_wakeup_gpios;
+
+	if (no_wake)
+		return !!(~no_wake & gpio_mask);
+
+	return false;
+}
+
+static inline void omap_set_gpio_trigger(struct gpio_bank *bank, int gpio,
+						unsigned trigger)
+{
+	void __iomem *base = bank->base;
+	u32 gpio_bit = BIT(gpio);
+
+	omap_gpio_rmw(base + bank->regs->leveldetect0, gpio_bit,
+		      trigger & IRQ_TYPE_LEVEL_LOW);
+	omap_gpio_rmw(base + bank->regs->leveldetect1, gpio_bit,
+		      trigger & IRQ_TYPE_LEVEL_HIGH);
+
+	/*
+	 * We need the edge detection enabled for to allow the GPIO block
+	 * to be woken from idle state.  Set the appropriate edge detection
+	 * in addition to the level detection.
+	 */
+	omap_gpio_rmw(base + bank->regs->risingdetect, gpio_bit,
+		      trigger & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_LEVEL_HIGH));
+	omap_gpio_rmw(base + bank->regs->fallingdetect, gpio_bit,
+		      trigger & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_LEVEL_LOW));
+
+	bank->context.leveldetect0 =
+			readl_relaxed(bank->base + bank->regs->leveldetect0);
+	bank->context.leveldetect1 =
+			readl_relaxed(bank->base + bank->regs->leveldetect1);
+	bank->context.risingdetect =
+			readl_relaxed(bank->base + bank->regs->risingdetect);
+	bank->context.fallingdetect =
+			readl_relaxed(bank->base + bank->regs->fallingdetect);
+
+	bank->level_mask = bank->context.leveldetect0 |
+			   bank->context.leveldetect1;
+
+	/* This part needs to be executed always for OMAP{34xx, 44xx} */
+	if (!bank->regs->irqctrl && !omap_gpio_is_off_wakeup_capable(bank, gpio)) {
+		/*
+		 * Log the edge gpio and manually trigger the IRQ
+		 * after resume if the input level changes
+		 * to avoid irq lost during PER RET/OFF mode
+		 * Applies for omap2 non-wakeup gpio and all omap3 gpios
+		 */
+		if (trigger & IRQ_TYPE_EDGE_BOTH)
+			bank->enabled_non_wakeup_gpios |= gpio_bit;
+		else
+			bank->enabled_non_wakeup_gpios &= ~gpio_bit;
+	}
+}
+
+/*
+ * This only applies to chips that can't do both rising and falling edge
+ * detection at once.  For all other chips, this function is a noop.
+ */
+static void omap_toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio)
+{
+	if (IS_ENABLED(CONFIG_ARCH_OMAP1) && bank->regs->irqctrl) {
+		void __iomem *reg = bank->base + bank->regs->irqctrl;
+
+		writel_relaxed(readl_relaxed(reg) ^ BIT(gpio), reg);
+	}
+}
+
+static int omap_set_gpio_triggering(struct gpio_bank *bank, int gpio,
+				    unsigned trigger)
+{
+	void __iomem *reg = bank->base;
+	u32 l = 0;
+
+	if (bank->regs->leveldetect0 && bank->regs->wkup_en) {
+		omap_set_gpio_trigger(bank, gpio, trigger);
+	} else if (bank->regs->irqctrl) {
+		reg += bank->regs->irqctrl;
+
+		l = readl_relaxed(reg);
+		if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
+			bank->toggle_mask |= BIT(gpio);
+		if (trigger & IRQ_TYPE_EDGE_RISING)
+			l |= BIT(gpio);
+		else if (trigger & IRQ_TYPE_EDGE_FALLING)
+			l &= ~(BIT(gpio));
+		else
+			return -EINVAL;
+
+		writel_relaxed(l, reg);
+	} else if (bank->regs->edgectrl1) {
+		if (gpio & 0x08)
+			reg += bank->regs->edgectrl2;
+		else
+			reg += bank->regs->edgectrl1;
+
+		gpio &= 0x07;
+		l = readl_relaxed(reg);
+		l &= ~(3 << (gpio << 1));
+		if (trigger & IRQ_TYPE_EDGE_RISING)
+			l |= 2 << (gpio << 1);
+		if (trigger & IRQ_TYPE_EDGE_FALLING)
+			l |= BIT(gpio << 1);
+		writel_relaxed(l, reg);
+	}
+	return 0;
+}
+
+static void omap_enable_gpio_module(struct gpio_bank *bank, unsigned offset)
+{
+	if (bank->regs->pinctrl) {
+		void __iomem *reg = bank->base + bank->regs->pinctrl;
+
+		/* Claim the pin for MPU */
+		writel_relaxed(readl_relaxed(reg) | (BIT(offset)), reg);
+	}
+
+	if (bank->regs->ctrl && !BANK_USED(bank)) {
+		void __iomem *reg = bank->base + bank->regs->ctrl;
+		u32 ctrl;
+
+		ctrl = readl_relaxed(reg);
+		/* Module is enabled, clocks are not gated */
+		ctrl &= ~GPIO_MOD_CTRL_BIT;
+		writel_relaxed(ctrl, reg);
+		bank->context.ctrl = ctrl;
+	}
+}
+
+static void omap_disable_gpio_module(struct gpio_bank *bank, unsigned offset)
+{
+	if (bank->regs->ctrl && !BANK_USED(bank)) {
+		void __iomem *reg = bank->base + bank->regs->ctrl;
+		u32 ctrl;
+
+		ctrl = readl_relaxed(reg);
+		/* Module is disabled, clocks are gated */
+		ctrl |= GPIO_MOD_CTRL_BIT;
+		writel_relaxed(ctrl, reg);
+		bank->context.ctrl = ctrl;
+	}
+}
+
+static int omap_gpio_is_input(struct gpio_bank *bank, unsigned offset)
+{
+	void __iomem *reg = bank->base + bank->regs->direction;
+
+	return readl_relaxed(reg) & BIT(offset);
+}
+
+static void omap_gpio_init_irq(struct gpio_bank *bank, unsigned offset)
+{
+	if (!LINE_USED(bank->mod_usage, offset)) {
+		omap_enable_gpio_module(bank, offset);
+		omap_set_gpio_direction(bank, offset, 1);
+	}
+	bank->irq_usage |= BIT(offset);
+}
+
+static int omap_gpio_irq_type(struct irq_data *d, unsigned type)
+{
+	struct gpio_bank *bank = omap_irq_data_get_bank(d);
+	int retval;
+	unsigned long flags;
+	unsigned offset = d->hwirq;
+
+	if (type & ~IRQ_TYPE_SENSE_MASK)
+		return -EINVAL;
+
+	if (!bank->regs->leveldetect0 &&
+		(type & (IRQ_TYPE_LEVEL_LOW|IRQ_TYPE_LEVEL_HIGH)))
+		return -EINVAL;
+
+	raw_spin_lock_irqsave(&bank->lock, flags);
+	retval = omap_set_gpio_triggering(bank, offset, type);
+	if (retval) {
+		raw_spin_unlock_irqrestore(&bank->lock, flags);
+		goto error;
+	}
+	omap_gpio_init_irq(bank, offset);
+	if (!omap_gpio_is_input(bank, offset)) {
+		raw_spin_unlock_irqrestore(&bank->lock, flags);
+		retval = -EINVAL;
+		goto error;
+	}
+	raw_spin_unlock_irqrestore(&bank->lock, flags);
+
+	if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
+		irq_set_handler_locked(d, handle_level_irq);
+	else if (type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
+		/*
+		 * Edge IRQs are already cleared/acked in irq_handler and
+		 * not need to be masked, as result handle_edge_irq()
+		 * logic is excessed here and may cause lose of interrupts.
+		 * So just use handle_simple_irq.
+		 */
+		irq_set_handler_locked(d, handle_simple_irq);
+
+	return 0;
+
+error:
+	return retval;
+}
+
+static void omap_clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
+{
+	void __iomem *reg = bank->base;
+
+	reg += bank->regs->irqstatus;
+	writel_relaxed(gpio_mask, reg);
+
+	/* Workaround for clearing DSP GPIO interrupts to allow retention */
+	if (bank->regs->irqstatus2) {
+		reg = bank->base + bank->regs->irqstatus2;
+		writel_relaxed(gpio_mask, reg);
+	}
+
+	/* Flush posted write for the irq status to avoid spurious interrupts */
+	readl_relaxed(reg);
+}
+
+static inline void omap_clear_gpio_irqstatus(struct gpio_bank *bank,
+					     unsigned offset)
+{
+	omap_clear_gpio_irqbank(bank, BIT(offset));
+}
+
+static u32 omap_get_gpio_irqbank_mask(struct gpio_bank *bank)
+{
+	void __iomem *reg = bank->base;
+	u32 l;
+	u32 mask = (BIT(bank->width)) - 1;
+
+	reg += bank->regs->irqenable;
+	l = readl_relaxed(reg);
+	if (bank->regs->irqenable_inv)
+		l = ~l;
+	l &= mask;
+	return l;
+}
+
+static inline void omap_set_gpio_irqenable(struct gpio_bank *bank,
+					   unsigned offset, int enable)
+{
+	void __iomem *reg = bank->base;
+	u32 gpio_mask = BIT(offset);
+
+	if (bank->regs->set_irqenable && bank->regs->clr_irqenable) {
+		if (enable) {
+			reg += bank->regs->set_irqenable;
+			bank->context.irqenable1 |= gpio_mask;
+		} else {
+			reg += bank->regs->clr_irqenable;
+			bank->context.irqenable1 &= ~gpio_mask;
+		}
+		writel_relaxed(gpio_mask, reg);
+	} else {
+		bank->context.irqenable1 =
+			omap_gpio_rmw(reg + bank->regs->irqenable, gpio_mask,
+				      enable ^ bank->regs->irqenable_inv);
+	}
+
+	/*
+	 * Program GPIO wakeup along with IRQ enable to satisfy OMAP4430 TRM
+	 * note requiring correlation between the IRQ enable registers and
+	 * the wakeup registers.  In any case, we want wakeup from idle
+	 * enabled for the GPIOs which support this feature.
+	 */
+	if (bank->regs->wkup_en &&
+	    (bank->regs->edgectrl1 || !(bank->non_wakeup_gpios & gpio_mask))) {
+		bank->context.wake_en =
+			omap_gpio_rmw(bank->base + bank->regs->wkup_en,
+				      gpio_mask, enable);
+	}
+}
+
+/* Use disable_irq_wake() and enable_irq_wake() functions from drivers */
+static int omap_gpio_wake_enable(struct irq_data *d, unsigned int enable)
+{
+	struct gpio_bank *bank = omap_irq_data_get_bank(d);
+
+	return irq_set_irq_wake(bank->irq, enable);
+}
+
+/*
+ * We need to unmask the GPIO bank interrupt as soon as possible to
+ * avoid missing GPIO interrupts for other lines in the bank.
+ * Then we need to mask-read-clear-unmask the triggered GPIO lines
+ * in the bank to avoid missing nested interrupts for a GPIO line.
+ * If we wait to unmask individual GPIO lines in the bank after the
+ * line's interrupt handler has been run, we may miss some nested
+ * interrupts.
+ */
+static irqreturn_t omap_gpio_irq_handler(int irq, void *gpiobank)
+{
+	void __iomem *isr_reg = NULL;
+	u32 enabled, isr, edge;
+	unsigned int bit;
+	struct gpio_bank *bank = gpiobank;
+	unsigned long wa_lock_flags;
+	unsigned long lock_flags;
+
+	isr_reg = bank->base + bank->regs->irqstatus;
+	if (WARN_ON(!isr_reg))
+		goto exit;
+
+	if (WARN_ONCE(!pm_runtime_active(bank->chip.parent),
+		      "gpio irq%i while runtime suspended?\n", irq))
+		return IRQ_NONE;
+
+	while (1) {
+		raw_spin_lock_irqsave(&bank->lock, lock_flags);
+
+		enabled = omap_get_gpio_irqbank_mask(bank);
+		isr = readl_relaxed(isr_reg) & enabled;
+
+		/*
+		 * Clear edge sensitive interrupts before calling handler(s)
+		 * so subsequent edge transitions are not missed while the
+		 * handlers are running.
+		 */
+		edge = isr & ~bank->level_mask;
+		if (edge)
+			omap_clear_gpio_irqbank(bank, edge);
+
+		raw_spin_unlock_irqrestore(&bank->lock, lock_flags);
+
+		if (!isr)
+			break;
+
+		while (isr) {
+			bit = __ffs(isr);
+			isr &= ~(BIT(bit));
+
+			raw_spin_lock_irqsave(&bank->lock, lock_flags);
+			/*
+			 * Some chips can't respond to both rising and falling
+			 * at the same time.  If this irq was requested with
+			 * both flags, we need to flip the ICR data for the IRQ
+			 * to respond to the IRQ for the opposite direction.
+			 * This will be indicated in the bank toggle_mask.
+			 */
+			if (bank->toggle_mask & (BIT(bit)))
+				omap_toggle_gpio_edge_triggering(bank, bit);
+
+			raw_spin_unlock_irqrestore(&bank->lock, lock_flags);
+
+			raw_spin_lock_irqsave(&bank->wa_lock, wa_lock_flags);
+
+			generic_handle_irq(irq_find_mapping(bank->chip.irq.domain,
+							    bit));
+
+			raw_spin_unlock_irqrestore(&bank->wa_lock,
+						   wa_lock_flags);
+		}
+	}
+exit:
+	return IRQ_HANDLED;
+}
+
+static unsigned int omap_gpio_irq_startup(struct irq_data *d)
+{
+	struct gpio_bank *bank = omap_irq_data_get_bank(d);
+	unsigned long flags;
+	unsigned offset = d->hwirq;
+
+	raw_spin_lock_irqsave(&bank->lock, flags);
+
+	if (!LINE_USED(bank->mod_usage, offset))
+		omap_set_gpio_direction(bank, offset, 1);
+	omap_enable_gpio_module(bank, offset);
+	bank->irq_usage |= BIT(offset);
+
+	raw_spin_unlock_irqrestore(&bank->lock, flags);
+	omap_gpio_unmask_irq(d);
+
+	return 0;
+}
+
+static void omap_gpio_irq_shutdown(struct irq_data *d)
+{
+	struct gpio_bank *bank = omap_irq_data_get_bank(d);
+	unsigned long flags;
+	unsigned offset = d->hwirq;
+
+	raw_spin_lock_irqsave(&bank->lock, flags);
+	bank->irq_usage &= ~(BIT(offset));
+	omap_set_gpio_triggering(bank, offset, IRQ_TYPE_NONE);
+	omap_clear_gpio_irqstatus(bank, offset);
+	omap_set_gpio_irqenable(bank, offset, 0);
+	if (!LINE_USED(bank->mod_usage, offset))
+		omap_clear_gpio_debounce(bank, offset);
+	omap_disable_gpio_module(bank, offset);
+	raw_spin_unlock_irqrestore(&bank->lock, flags);
+}
+
+static void omap_gpio_irq_bus_lock(struct irq_data *data)
+{
+	struct gpio_bank *bank = omap_irq_data_get_bank(data);
+
+	pm_runtime_get_sync(bank->chip.parent);
+}
+
+static void gpio_irq_bus_sync_unlock(struct irq_data *data)
+{
+	struct gpio_bank *bank = omap_irq_data_get_bank(data);
+
+	pm_runtime_put(bank->chip.parent);
+}
+
+static void omap_gpio_mask_irq(struct irq_data *d)
+{
+	struct gpio_bank *bank = omap_irq_data_get_bank(d);
+	unsigned offset = d->hwirq;
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&bank->lock, flags);
+	omap_set_gpio_triggering(bank, offset, IRQ_TYPE_NONE);
+	omap_set_gpio_irqenable(bank, offset, 0);
+	raw_spin_unlock_irqrestore(&bank->lock, flags);
+}
+
+static void omap_gpio_unmask_irq(struct irq_data *d)
+{
+	struct gpio_bank *bank = omap_irq_data_get_bank(d);
+	unsigned offset = d->hwirq;
+	u32 trigger = irqd_get_trigger_type(d);
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&bank->lock, flags);
+	omap_set_gpio_irqenable(bank, offset, 1);
+
+	/*
+	 * For level-triggered GPIOs, clearing must be done after the source
+	 * is cleared, thus after the handler has run. OMAP4 needs this done
+	 * after enabing the interrupt to clear the wakeup status.
+	 */
+	if (bank->regs->leveldetect0 && bank->regs->wkup_en &&
+	    trigger & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW))
+		omap_clear_gpio_irqstatus(bank, offset);
+
+	if (trigger)
+		omap_set_gpio_triggering(bank, offset, trigger);
+
+	raw_spin_unlock_irqrestore(&bank->lock, flags);
+}
+
+/*---------------------------------------------------------------------*/
+
+static int omap_mpuio_suspend_noirq(struct device *dev)
+{
+	struct gpio_bank	*bank = dev_get_drvdata(dev);
+	void __iomem		*mask_reg = bank->base +
+					OMAP_MPUIO_GPIO_MASKIT / bank->stride;
+	unsigned long		flags;
+
+	raw_spin_lock_irqsave(&bank->lock, flags);
+	writel_relaxed(0xffff & ~bank->context.wake_en, mask_reg);
+	raw_spin_unlock_irqrestore(&bank->lock, flags);
+
+	return 0;
+}
+
+static int omap_mpuio_resume_noirq(struct device *dev)
+{
+	struct gpio_bank	*bank = dev_get_drvdata(dev);
+	void __iomem		*mask_reg = bank->base +
+					OMAP_MPUIO_GPIO_MASKIT / bank->stride;
+	unsigned long		flags;
+
+	raw_spin_lock_irqsave(&bank->lock, flags);
+	writel_relaxed(bank->context.wake_en, mask_reg);
+	raw_spin_unlock_irqrestore(&bank->lock, flags);
+
+	return 0;
+}
+
+static const struct dev_pm_ops omap_mpuio_dev_pm_ops = {
+	.suspend_noirq = omap_mpuio_suspend_noirq,
+	.resume_noirq = omap_mpuio_resume_noirq,
+};
+
+/* use platform_driver for this. */
+static struct platform_driver omap_mpuio_driver = {
+	.driver		= {
+		.name	= "mpuio",
+		.pm	= &omap_mpuio_dev_pm_ops,
+	},
+};
+
+static struct platform_device omap_mpuio_device = {
+	.name		= "mpuio",
+	.id		= -1,
+	.dev = {
+		.driver = &omap_mpuio_driver.driver,
+	}
+	/* could list the /proc/iomem resources */
+};
+
+static inline void omap_mpuio_init(struct gpio_bank *bank)
+{
+	platform_set_drvdata(&omap_mpuio_device, bank);
+
+	if (platform_driver_register(&omap_mpuio_driver) == 0)
+		(void) platform_device_register(&omap_mpuio_device);
+}
+
+/*---------------------------------------------------------------------*/
+
+static int omap_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+	struct gpio_bank *bank = gpiochip_get_data(chip);
+	unsigned long flags;
+
+	pm_runtime_get_sync(chip->parent);
+
+	raw_spin_lock_irqsave(&bank->lock, flags);
+	omap_enable_gpio_module(bank, offset);
+	bank->mod_usage |= BIT(offset);
+	raw_spin_unlock_irqrestore(&bank->lock, flags);
+
+	return 0;
+}
+
+static void omap_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+	struct gpio_bank *bank = gpiochip_get_data(chip);
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&bank->lock, flags);
+	bank->mod_usage &= ~(BIT(offset));
+	if (!LINE_USED(bank->irq_usage, offset)) {
+		omap_set_gpio_direction(bank, offset, 1);
+		omap_clear_gpio_debounce(bank, offset);
+	}
+	omap_disable_gpio_module(bank, offset);
+	raw_spin_unlock_irqrestore(&bank->lock, flags);
+
+	pm_runtime_put(chip->parent);
+}
+
+static int omap_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
+{
+	struct gpio_bank *bank = gpiochip_get_data(chip);
+
+	if (readl_relaxed(bank->base + bank->regs->direction) & BIT(offset))
+		return GPIO_LINE_DIRECTION_IN;
+
+	return GPIO_LINE_DIRECTION_OUT;
+}
+
+static int omap_gpio_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct gpio_bank *bank;
+	unsigned long flags;
+
+	bank = gpiochip_get_data(chip);
+	raw_spin_lock_irqsave(&bank->lock, flags);
+	omap_set_gpio_direction(bank, offset, 1);
+	raw_spin_unlock_irqrestore(&bank->lock, flags);
+	return 0;
+}
+
+static int omap_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct gpio_bank *bank = gpiochip_get_data(chip);
+	void __iomem *reg;
+
+	if (omap_gpio_is_input(bank, offset))
+		reg = bank->base + bank->regs->datain;
+	else
+		reg = bank->base + bank->regs->dataout;
+
+	return (readl_relaxed(reg) & BIT(offset)) != 0;
+}
+
+static int omap_gpio_output(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct gpio_bank *bank;
+	unsigned long flags;
+
+	bank = gpiochip_get_data(chip);
+	raw_spin_lock_irqsave(&bank->lock, flags);
+	bank->set_dataout(bank, offset, value);
+	omap_set_gpio_direction(bank, offset, 0);
+	raw_spin_unlock_irqrestore(&bank->lock, flags);
+	return 0;
+}
+
+static int omap_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask,
+				  unsigned long *bits)
+{
+	struct gpio_bank *bank = gpiochip_get_data(chip);
+	void __iomem *base = bank->base;
+	u32 direction, m, val = 0;
+
+	direction = readl_relaxed(base + bank->regs->direction);
+
+	m = direction & *mask;
+	if (m)
+		val |= readl_relaxed(base + bank->regs->datain) & m;
+
+	m = ~direction & *mask;
+	if (m)
+		val |= readl_relaxed(base + bank->regs->dataout) & m;
+
+	*bits = val;
+
+	return 0;
+}
+
+static int omap_gpio_debounce(struct gpio_chip *chip, unsigned offset,
+			      unsigned debounce)
+{
+	struct gpio_bank *bank;
+	unsigned long flags;
+	int ret;
+
+	bank = gpiochip_get_data(chip);
+
+	raw_spin_lock_irqsave(&bank->lock, flags);
+	ret = omap2_set_gpio_debounce(bank, offset, debounce);
+	raw_spin_unlock_irqrestore(&bank->lock, flags);
+
+	if (ret)
+		dev_info(chip->parent,
+			 "Could not set line %u debounce to %u microseconds (%d)",
+			 offset, debounce, ret);
+
+	return ret;
+}
+
+static int omap_gpio_set_config(struct gpio_chip *chip, unsigned offset,
+				unsigned long config)
+{
+	u32 debounce;
+	int ret = -ENOTSUPP;
+
+	switch (pinconf_to_config_param(config)) {
+	case PIN_CONFIG_BIAS_DISABLE:
+	case PIN_CONFIG_BIAS_PULL_UP:
+	case PIN_CONFIG_BIAS_PULL_DOWN:
+		ret = gpiochip_generic_config(chip, offset, config);
+		break;
+	case PIN_CONFIG_INPUT_DEBOUNCE:
+		debounce = pinconf_to_config_argument(config);
+		ret = omap_gpio_debounce(chip, offset, debounce);
+		break;
+	default:
+		break;
+	}
+
+	return ret;
+}
+
+static void omap_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct gpio_bank *bank;
+	unsigned long flags;
+
+	bank = gpiochip_get_data(chip);
+	raw_spin_lock_irqsave(&bank->lock, flags);
+	bank->set_dataout(bank, offset, value);
+	raw_spin_unlock_irqrestore(&bank->lock, flags);
+}
+
+static void omap_gpio_set_multiple(struct gpio_chip *chip, unsigned long *mask,
+				   unsigned long *bits)
+{
+	struct gpio_bank *bank = gpiochip_get_data(chip);
+	void __iomem *reg = bank->base + bank->regs->dataout;
+	unsigned long flags;
+	u32 l;
+
+	raw_spin_lock_irqsave(&bank->lock, flags);
+	l = (readl_relaxed(reg) & ~*mask) | (*bits & *mask);
+	writel_relaxed(l, reg);
+	bank->context.dataout = l;
+	raw_spin_unlock_irqrestore(&bank->lock, flags);
+}
+
+/*---------------------------------------------------------------------*/
+
+static void omap_gpio_show_rev(struct gpio_bank *bank)
+{
+	static bool called;
+	u32 rev;
+
+	if (called || bank->regs->revision == USHRT_MAX)
+		return;
+
+	rev = readw_relaxed(bank->base + bank->regs->revision);
+	pr_info("OMAP GPIO hardware version %d.%d\n",
+		(rev >> 4) & 0x0f, rev & 0x0f);
+
+	called = true;
+}
+
+static void omap_gpio_mod_init(struct gpio_bank *bank)
+{
+	void __iomem *base = bank->base;
+	u32 l = 0xffffffff;
+
+	if (bank->width == 16)
+		l = 0xffff;
+
+	if (bank->is_mpuio) {
+		writel_relaxed(l, bank->base + bank->regs->irqenable);
+		return;
+	}
+
+	omap_gpio_rmw(base + bank->regs->irqenable, l,
+		      bank->regs->irqenable_inv);
+	omap_gpio_rmw(base + bank->regs->irqstatus, l,
+		      !bank->regs->irqenable_inv);
+	if (bank->regs->debounce_en)
+		writel_relaxed(0, base + bank->regs->debounce_en);
+
+	/* Save OE default value (0xffffffff) in the context */
+	bank->context.oe = readl_relaxed(bank->base + bank->regs->direction);
+	 /* Initialize interface clk ungated, module enabled */
+	if (bank->regs->ctrl)
+		writel_relaxed(0, base + bank->regs->ctrl);
+}
+
+static int omap_gpio_chip_init(struct gpio_bank *bank, struct irq_chip *irqc)
+{
+	struct gpio_irq_chip *irq;
+	static int gpio;
+	const char *label;
+	int irq_base = 0;
+	int ret;
+
+	/*
+	 * REVISIT eventually switch from OMAP-specific gpio structs
+	 * over to the generic ones
+	 */
+	bank->chip.request = omap_gpio_request;
+	bank->chip.free = omap_gpio_free;
+	bank->chip.get_direction = omap_gpio_get_direction;
+	bank->chip.direction_input = omap_gpio_input;
+	bank->chip.get = omap_gpio_get;
+	bank->chip.get_multiple = omap_gpio_get_multiple;
+	bank->chip.direction_output = omap_gpio_output;
+	bank->chip.set_config = omap_gpio_set_config;
+	bank->chip.set = omap_gpio_set;
+	bank->chip.set_multiple = omap_gpio_set_multiple;
+	if (bank->is_mpuio) {
+		bank->chip.label = "mpuio";
+		if (bank->regs->wkup_en)
+			bank->chip.parent = &omap_mpuio_device.dev;
+		bank->chip.base = OMAP_MPUIO(0);
+	} else {
+		label = devm_kasprintf(bank->chip.parent, GFP_KERNEL, "gpio-%d-%d",
+				       gpio, gpio + bank->width - 1);
+		if (!label)
+			return -ENOMEM;
+		bank->chip.label = label;
+		bank->chip.base = gpio;
+	}
+	bank->chip.ngpio = bank->width;
+
+#ifdef CONFIG_ARCH_OMAP1
+	/*
+	 * REVISIT: Once we have OMAP1 supporting SPARSE_IRQ, we can drop
+	 * irq_alloc_descs() since a base IRQ offset will no longer be needed.
+	 */
+	irq_base = devm_irq_alloc_descs(bank->chip.parent,
+					-1, 0, bank->width, 0);
+	if (irq_base < 0) {
+		dev_err(bank->chip.parent, "Couldn't allocate IRQ numbers\n");
+		return -ENODEV;
+	}
+#endif
+
+	/* MPUIO is a bit different, reading IRQ status clears it */
+	if (bank->is_mpuio && !bank->regs->wkup_en)
+		irqc->irq_set_wake = NULL;
+
+	irq = &bank->chip.irq;
+	irq->chip = irqc;
+	irq->handler = handle_bad_irq;
+	irq->default_type = IRQ_TYPE_NONE;
+	irq->num_parents = 1;
+	irq->parents = &bank->irq;
+	irq->first = irq_base;
+
+	ret = gpiochip_add_data(&bank->chip, bank);
+	if (ret) {
+		dev_err(bank->chip.parent,
+			"Could not register gpio chip %d\n", ret);
+		return ret;
+	}
+
+	ret = devm_request_irq(bank->chip.parent, bank->irq,
+			       omap_gpio_irq_handler,
+			       0, dev_name(bank->chip.parent), bank);
+	if (ret)
+		gpiochip_remove(&bank->chip);
+
+	if (!bank->is_mpuio)
+		gpio += bank->width;
+
+	return ret;
+}
+
+static void omap_gpio_init_context(struct gpio_bank *p)
+{
+	const struct omap_gpio_reg_offs *regs = p->regs;
+	void __iomem *base = p->base;
+
+	p->context.sysconfig	= readl_relaxed(base + regs->sysconfig);
+	p->context.ctrl		= readl_relaxed(base + regs->ctrl);
+	p->context.oe		= readl_relaxed(base + regs->direction);
+	p->context.wake_en	= readl_relaxed(base + regs->wkup_en);
+	p->context.leveldetect0	= readl_relaxed(base + regs->leveldetect0);
+	p->context.leveldetect1	= readl_relaxed(base + regs->leveldetect1);
+	p->context.risingdetect	= readl_relaxed(base + regs->risingdetect);
+	p->context.fallingdetect = readl_relaxed(base + regs->fallingdetect);
+	p->context.irqenable1	= readl_relaxed(base + regs->irqenable);
+	p->context.irqenable2	= readl_relaxed(base + regs->irqenable2);
+	p->context.dataout	= readl_relaxed(base + regs->dataout);
+
+	p->context_valid = true;
+}
+
+static void omap_gpio_restore_context(struct gpio_bank *bank)
+{
+	const struct omap_gpio_reg_offs *regs = bank->regs;
+	void __iomem *base = bank->base;
+
+	writel_relaxed(bank->context.sysconfig, base + regs->sysconfig);
+	writel_relaxed(bank->context.wake_en, base + regs->wkup_en);
+	writel_relaxed(bank->context.ctrl, base + regs->ctrl);
+	writel_relaxed(bank->context.leveldetect0, base + regs->leveldetect0);
+	writel_relaxed(bank->context.leveldetect1, base + regs->leveldetect1);
+	writel_relaxed(bank->context.risingdetect, base + regs->risingdetect);
+	writel_relaxed(bank->context.fallingdetect, base + regs->fallingdetect);
+	writel_relaxed(bank->context.dataout, base + regs->dataout);
+	writel_relaxed(bank->context.oe, base + regs->direction);
+
+	if (bank->dbck_enable_mask) {
+		writel_relaxed(bank->context.debounce, base + regs->debounce);
+		writel_relaxed(bank->context.debounce_en,
+			       base + regs->debounce_en);
+	}
+
+	writel_relaxed(bank->context.irqenable1, base + regs->irqenable);
+	writel_relaxed(bank->context.irqenable2, base + regs->irqenable2);
+}
+
+static void omap_gpio_idle(struct gpio_bank *bank, bool may_lose_context)
+{
+	struct device *dev = bank->chip.parent;
+	void __iomem *base = bank->base;
+	u32 mask, nowake;
+
+	bank->saved_datain = readl_relaxed(base + bank->regs->datain);
+
+	/* Save syconfig, it's runtime value can be different from init value */
+	if (bank->loses_context)
+		bank->context.sysconfig = readl_relaxed(base + bank->regs->sysconfig);
+
+	if (!bank->enabled_non_wakeup_gpios)
+		goto update_gpio_context_count;
+
+	/* Check for pending EDGE_FALLING, ignore EDGE_BOTH */
+	mask = bank->enabled_non_wakeup_gpios & bank->context.fallingdetect;
+	mask &= ~bank->context.risingdetect;
+	bank->saved_datain |= mask;
+
+	/* Check for pending EDGE_RISING, ignore EDGE_BOTH */
+	mask = bank->enabled_non_wakeup_gpios & bank->context.risingdetect;
+	mask &= ~bank->context.fallingdetect;
+	bank->saved_datain &= ~mask;
+
+	if (!may_lose_context)
+		goto update_gpio_context_count;
+
+	/*
+	 * If going to OFF, remove triggering for all wkup domain
+	 * non-wakeup GPIOs.  Otherwise spurious IRQs will be
+	 * generated.  See OMAP2420 Errata item 1.101.
+	 */
+	if (!bank->loses_context && bank->enabled_non_wakeup_gpios) {
+		nowake = bank->enabled_non_wakeup_gpios;
+		omap_gpio_rmw(base + bank->regs->fallingdetect, nowake, ~nowake);
+		omap_gpio_rmw(base + bank->regs->risingdetect, nowake, ~nowake);
+	}
+
+update_gpio_context_count:
+	if (bank->get_context_loss_count)
+		bank->context_loss_count =
+				bank->get_context_loss_count(dev);
+
+	omap_gpio_dbck_disable(bank);
+}
+
+static void omap_gpio_unidle(struct gpio_bank *bank)
+{
+	struct device *dev = bank->chip.parent;
+	u32 l = 0, gen, gen0, gen1;
+	int c;
+
+	/*
+	 * On the first resume during the probe, the context has not
+	 * been initialised and so initialise it now. Also initialise
+	 * the context loss count.
+	 */
+	if (bank->loses_context && !bank->context_valid) {
+		omap_gpio_init_context(bank);
+
+		if (bank->get_context_loss_count)
+			bank->context_loss_count =
+				bank->get_context_loss_count(dev);
+	}
+
+	omap_gpio_dbck_enable(bank);
+
+	if (bank->loses_context) {
+		if (!bank->get_context_loss_count) {
+			omap_gpio_restore_context(bank);
+		} else {
+			c = bank->get_context_loss_count(dev);
+			if (c != bank->context_loss_count) {
+				omap_gpio_restore_context(bank);
+			} else {
+				return;
+			}
+		}
+	} else {
+		/* Restore changes done for OMAP2420 errata 1.101 */
+		writel_relaxed(bank->context.fallingdetect,
+			       bank->base + bank->regs->fallingdetect);
+		writel_relaxed(bank->context.risingdetect,
+			       bank->base + bank->regs->risingdetect);
+	}
+
+	l = readl_relaxed(bank->base + bank->regs->datain);
+
+	/*
+	 * Check if any of the non-wakeup interrupt GPIOs have changed
+	 * state.  If so, generate an IRQ by software.  This is
+	 * horribly racy, but it's the best we can do to work around
+	 * this silicon bug.
+	 */
+	l ^= bank->saved_datain;
+	l &= bank->enabled_non_wakeup_gpios;
+
+	/*
+	 * No need to generate IRQs for the rising edge for gpio IRQs
+	 * configured with falling edge only; and vice versa.
+	 */
+	gen0 = l & bank->context.fallingdetect;
+	gen0 &= bank->saved_datain;
+
+	gen1 = l & bank->context.risingdetect;
+	gen1 &= ~(bank->saved_datain);
+
+	/* FIXME: Consider GPIO IRQs with level detections properly! */
+	gen = l & (~(bank->context.fallingdetect) &
+					 ~(bank->context.risingdetect));
+	/* Consider all GPIO IRQs needed to be updated */
+	gen |= gen0 | gen1;
+
+	if (gen) {
+		u32 old0, old1;
+
+		old0 = readl_relaxed(bank->base + bank->regs->leveldetect0);
+		old1 = readl_relaxed(bank->base + bank->regs->leveldetect1);
+
+		if (!bank->regs->irqstatus_raw0) {
+			writel_relaxed(old0 | gen, bank->base +
+						bank->regs->leveldetect0);
+			writel_relaxed(old1 | gen, bank->base +
+						bank->regs->leveldetect1);
+		}
+
+		if (bank->regs->irqstatus_raw0) {
+			writel_relaxed(old0 | l, bank->base +
+						bank->regs->leveldetect0);
+			writel_relaxed(old1 | l, bank->base +
+						bank->regs->leveldetect1);
+		}
+		writel_relaxed(old0, bank->base + bank->regs->leveldetect0);
+		writel_relaxed(old1, bank->base + bank->regs->leveldetect1);
+	}
+}
+
+static int gpio_omap_cpu_notifier(struct notifier_block *nb,
+				  unsigned long cmd, void *v)
+{
+	struct gpio_bank *bank;
+	unsigned long flags;
+	int ret = NOTIFY_OK;
+	u32 isr, mask;
+
+	bank = container_of(nb, struct gpio_bank, nb);
+
+	raw_spin_lock_irqsave(&bank->lock, flags);
+	if (bank->is_suspended)
+		goto out_unlock;
+
+	switch (cmd) {
+	case CPU_CLUSTER_PM_ENTER:
+		mask = omap_get_gpio_irqbank_mask(bank);
+		isr = readl_relaxed(bank->base + bank->regs->irqstatus) & mask;
+		if (isr) {
+			ret = NOTIFY_BAD;
+			break;
+		}
+		omap_gpio_idle(bank, true);
+		break;
+	case CPU_CLUSTER_PM_ENTER_FAILED:
+	case CPU_CLUSTER_PM_EXIT:
+		omap_gpio_unidle(bank);
+		break;
+	}
+
+out_unlock:
+	raw_spin_unlock_irqrestore(&bank->lock, flags);
+
+	return ret;
+}
+
+static const struct omap_gpio_reg_offs omap2_gpio_regs = {
+	.revision =		OMAP24XX_GPIO_REVISION,
+	.sysconfig =		OMAP24XX_GPIO_SYSCONFIG,
+	.direction =		OMAP24XX_GPIO_OE,
+	.datain =		OMAP24XX_GPIO_DATAIN,
+	.dataout =		OMAP24XX_GPIO_DATAOUT,
+	.set_dataout =		OMAP24XX_GPIO_SETDATAOUT,
+	.clr_dataout =		OMAP24XX_GPIO_CLEARDATAOUT,
+	.irqstatus =		OMAP24XX_GPIO_IRQSTATUS1,
+	.irqstatus2 =		OMAP24XX_GPIO_IRQSTATUS2,
+	.irqenable =		OMAP24XX_GPIO_IRQENABLE1,
+	.irqenable2 =		OMAP24XX_GPIO_IRQENABLE2,
+	.set_irqenable =	OMAP24XX_GPIO_SETIRQENABLE1,
+	.clr_irqenable =	OMAP24XX_GPIO_CLEARIRQENABLE1,
+	.debounce =		OMAP24XX_GPIO_DEBOUNCE_VAL,
+	.debounce_en =		OMAP24XX_GPIO_DEBOUNCE_EN,
+	.ctrl =			OMAP24XX_GPIO_CTRL,
+	.wkup_en =		OMAP24XX_GPIO_WAKE_EN,
+	.leveldetect0 =		OMAP24XX_GPIO_LEVELDETECT0,
+	.leveldetect1 =		OMAP24XX_GPIO_LEVELDETECT1,
+	.risingdetect =		OMAP24XX_GPIO_RISINGDETECT,
+	.fallingdetect =	OMAP24XX_GPIO_FALLINGDETECT,
+};
+
+static const struct omap_gpio_reg_offs omap4_gpio_regs = {
+	.revision =		OMAP4_GPIO_REVISION,
+	.sysconfig =		OMAP4_GPIO_SYSCONFIG,
+	.direction =		OMAP4_GPIO_OE,
+	.datain =		OMAP4_GPIO_DATAIN,
+	.dataout =		OMAP4_GPIO_DATAOUT,
+	.set_dataout =		OMAP4_GPIO_SETDATAOUT,
+	.clr_dataout =		OMAP4_GPIO_CLEARDATAOUT,
+	.irqstatus =		OMAP4_GPIO_IRQSTATUS0,
+	.irqstatus2 =		OMAP4_GPIO_IRQSTATUS1,
+	.irqstatus_raw0 =	OMAP4_GPIO_IRQSTATUSRAW0,
+	.irqstatus_raw1 =	OMAP4_GPIO_IRQSTATUSRAW1,
+	.irqenable =		OMAP4_GPIO_IRQSTATUSSET0,
+	.irqenable2 =		OMAP4_GPIO_IRQSTATUSSET1,
+	.set_irqenable =	OMAP4_GPIO_IRQSTATUSSET0,
+	.clr_irqenable =	OMAP4_GPIO_IRQSTATUSCLR0,
+	.debounce =		OMAP4_GPIO_DEBOUNCINGTIME,
+	.debounce_en =		OMAP4_GPIO_DEBOUNCENABLE,
+	.ctrl =			OMAP4_GPIO_CTRL,
+	.wkup_en =		OMAP4_GPIO_IRQWAKEN0,
+	.leveldetect0 =		OMAP4_GPIO_LEVELDETECT0,
+	.leveldetect1 =		OMAP4_GPIO_LEVELDETECT1,
+	.risingdetect =		OMAP4_GPIO_RISINGDETECT,
+	.fallingdetect =	OMAP4_GPIO_FALLINGDETECT,
+};
+
+static const struct omap_gpio_platform_data omap2_pdata = {
+	.regs = &omap2_gpio_regs,
+	.bank_width = 32,
+	.dbck_flag = false,
+};
+
+static const struct omap_gpio_platform_data omap3_pdata = {
+	.regs = &omap2_gpio_regs,
+	.bank_width = 32,
+	.dbck_flag = true,
+};
+
+static const struct omap_gpio_platform_data omap4_pdata = {
+	.regs = &omap4_gpio_regs,
+	.bank_width = 32,
+	.dbck_flag = true,
+};
+
+static const struct of_device_id omap_gpio_match[] = {
+	{
+		.compatible = "ti,omap4-gpio",
+		.data = &omap4_pdata,
+	},
+	{
+		.compatible = "ti,omap3-gpio",
+		.data = &omap3_pdata,
+	},
+	{
+		.compatible = "ti,omap2-gpio",
+		.data = &omap2_pdata,
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, omap_gpio_match);
+
+static int omap_gpio_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *node = dev->of_node;
+	const struct of_device_id *match;
+	const struct omap_gpio_platform_data *pdata;
+	struct gpio_bank *bank;
+	struct irq_chip *irqc;
+	int ret;
+
+	match = of_match_device(of_match_ptr(omap_gpio_match), dev);
+
+	pdata = match ? match->data : dev_get_platdata(dev);
+	if (!pdata)
+		return -EINVAL;
+
+	bank = devm_kzalloc(dev, sizeof(*bank), GFP_KERNEL);
+	if (!bank)
+		return -ENOMEM;
+
+	irqc = devm_kzalloc(dev, sizeof(*irqc), GFP_KERNEL);
+	if (!irqc)
+		return -ENOMEM;
+
+	irqc->irq_startup = omap_gpio_irq_startup,
+	irqc->irq_shutdown = omap_gpio_irq_shutdown,
+	irqc->irq_ack = dummy_irq_chip.irq_ack,
+	irqc->irq_mask = omap_gpio_mask_irq,
+	irqc->irq_unmask = omap_gpio_unmask_irq,
+	irqc->irq_set_type = omap_gpio_irq_type,
+	irqc->irq_set_wake = omap_gpio_wake_enable,
+	irqc->irq_bus_lock = omap_gpio_irq_bus_lock,
+	irqc->irq_bus_sync_unlock = gpio_irq_bus_sync_unlock,
+	irqc->name = dev_name(&pdev->dev);
+	irqc->flags = IRQCHIP_MASK_ON_SUSPEND;
+	irqc->parent_device = dev;
+
+	bank->irq = platform_get_irq(pdev, 0);
+	if (bank->irq <= 0) {
+		if (!bank->irq)
+			bank->irq = -ENXIO;
+		return dev_err_probe(dev, bank->irq, "can't get irq resource\n");
+	}
+
+	bank->chip.parent = dev;
+	bank->chip.owner = THIS_MODULE;
+	bank->dbck_flag = pdata->dbck_flag;
+	bank->stride = pdata->bank_stride;
+	bank->width = pdata->bank_width;
+	bank->is_mpuio = pdata->is_mpuio;
+	bank->non_wakeup_gpios = pdata->non_wakeup_gpios;
+	bank->regs = pdata->regs;
+#ifdef CONFIG_OF_GPIO
+	bank->chip.of_node = of_node_get(node);
+#endif
+
+	if (node) {
+		if (!of_property_read_bool(node, "ti,gpio-always-on"))
+			bank->loses_context = true;
+	} else {
+		bank->loses_context = pdata->loses_context;
+
+		if (bank->loses_context)
+			bank->get_context_loss_count =
+				pdata->get_context_loss_count;
+	}
+
+	if (bank->regs->set_dataout && bank->regs->clr_dataout)
+		bank->set_dataout = omap_set_gpio_dataout_reg;
+	else
+		bank->set_dataout = omap_set_gpio_dataout_mask;
+
+	raw_spin_lock_init(&bank->lock);
+	raw_spin_lock_init(&bank->wa_lock);
+
+	/* Static mapping, never released */
+	bank->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(bank->base)) {
+		return PTR_ERR(bank->base);
+	}
+
+	if (bank->dbck_flag) {
+		bank->dbck = devm_clk_get(dev, "dbclk");
+		if (IS_ERR(bank->dbck)) {
+			dev_err(dev,
+				"Could not get gpio dbck. Disable debounce\n");
+			bank->dbck_flag = false;
+		} else {
+			clk_prepare(bank->dbck);
+		}
+	}
+
+	platform_set_drvdata(pdev, bank);
+
+	pm_runtime_enable(dev);
+	pm_runtime_get_sync(dev);
+
+	if (bank->is_mpuio)
+		omap_mpuio_init(bank);
+
+	omap_gpio_mod_init(bank);
+
+	ret = omap_gpio_chip_init(bank, irqc);
+	if (ret) {
+		pm_runtime_put_sync(dev);
+		pm_runtime_disable(dev);
+		if (bank->dbck_flag)
+			clk_unprepare(bank->dbck);
+		return ret;
+	}
+
+	omap_gpio_show_rev(bank);
+
+	bank->nb.notifier_call = gpio_omap_cpu_notifier;
+	cpu_pm_register_notifier(&bank->nb);
+
+	pm_runtime_put(dev);
+
+	return 0;
+}
+
+static int omap_gpio_remove(struct platform_device *pdev)
+{
+	struct gpio_bank *bank = platform_get_drvdata(pdev);
+
+	cpu_pm_unregister_notifier(&bank->nb);
+	gpiochip_remove(&bank->chip);
+	pm_runtime_disable(&pdev->dev);
+	if (bank->dbck_flag)
+		clk_unprepare(bank->dbck);
+
+	return 0;
+}
+
+static int __maybe_unused omap_gpio_runtime_suspend(struct device *dev)
+{
+	struct gpio_bank *bank = dev_get_drvdata(dev);
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&bank->lock, flags);
+	omap_gpio_idle(bank, true);
+	bank->is_suspended = true;
+	raw_spin_unlock_irqrestore(&bank->lock, flags);
+
+	return 0;
+}
+
+static int __maybe_unused omap_gpio_runtime_resume(struct device *dev)
+{
+	struct gpio_bank *bank = dev_get_drvdata(dev);
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&bank->lock, flags);
+	omap_gpio_unidle(bank);
+	bank->is_suspended = false;
+	raw_spin_unlock_irqrestore(&bank->lock, flags);
+
+	return 0;
+}
+
+static int __maybe_unused omap_gpio_suspend(struct device *dev)
+{
+	struct gpio_bank *bank = dev_get_drvdata(dev);
+
+	if (bank->is_suspended)
+		return 0;
+
+	bank->needs_resume = 1;
+
+	return omap_gpio_runtime_suspend(dev);
+}
+
+static int __maybe_unused omap_gpio_resume(struct device *dev)
+{
+	struct gpio_bank *bank = dev_get_drvdata(dev);
+
+	if (!bank->needs_resume)
+		return 0;
+
+	bank->needs_resume = 0;
+
+	return omap_gpio_runtime_resume(dev);
+}
+
+static const struct dev_pm_ops gpio_pm_ops = {
+	SET_RUNTIME_PM_OPS(omap_gpio_runtime_suspend, omap_gpio_runtime_resume,
+									NULL)
+	SET_LATE_SYSTEM_SLEEP_PM_OPS(omap_gpio_suspend, omap_gpio_resume)
+};
+
+static struct platform_driver omap_gpio_driver = {
+	.probe		= omap_gpio_probe,
+	.remove		= omap_gpio_remove,
+	.driver		= {
+		.name	= "omap_gpio",
+		.pm	= &gpio_pm_ops,
+		.of_match_table = omap_gpio_match,
+	},
+};
+
+/*
+ * gpio driver register needs to be done before
+ * machine_init functions access gpio APIs.
+ * Hence omap_gpio_drv_reg() is a postcore_initcall.
+ */
+static int __init omap_gpio_drv_reg(void)
+{
+	return platform_driver_register(&omap_gpio_driver);
+}
+postcore_initcall(omap_gpio_drv_reg);
+
+static void __exit omap_gpio_exit(void)
+{
+	platform_driver_unregister(&omap_gpio_driver);
+}
+module_exit(omap_gpio_exit);
+
+MODULE_DESCRIPTION("omap gpio driver");
+MODULE_ALIAS("platform:gpio-omap");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-palmas.c b/drivers/gpio/gpio-palmas.c
new file mode 100644
index 000000000..e8e9029ba
--- /dev/null
+++ b/drivers/gpio/gpio-palmas.c
@@ -0,0 +1,203 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * TI Palma series PMIC's GPIO driver.
+ *
+ * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * Author: Laxman Dewangan <ldewangan@nvidia.com>
+ */
+
+#include <linux/gpio/driver.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mfd/palmas.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+struct palmas_gpio {
+	struct gpio_chip gpio_chip;
+	struct palmas *palmas;
+};
+
+struct palmas_device_data {
+	int ngpio;
+};
+
+static int palmas_gpio_get(struct gpio_chip *gc, unsigned offset)
+{
+	struct palmas_gpio *pg = gpiochip_get_data(gc);
+	struct palmas *palmas = pg->palmas;
+	unsigned int val;
+	int ret;
+	unsigned int reg;
+	int gpio16 = (offset/8);
+
+	offset %= 8;
+	reg = (gpio16) ? PALMAS_GPIO_DATA_DIR2 : PALMAS_GPIO_DATA_DIR;
+
+	ret = palmas_read(palmas, PALMAS_GPIO_BASE, reg, &val);
+	if (ret < 0) {
+		dev_err(gc->parent, "Reg 0x%02x read failed, %d\n", reg, ret);
+		return ret;
+	}
+
+	if (val & BIT(offset))
+		reg = (gpio16) ? PALMAS_GPIO_DATA_OUT2 : PALMAS_GPIO_DATA_OUT;
+	else
+		reg = (gpio16) ? PALMAS_GPIO_DATA_IN2 : PALMAS_GPIO_DATA_IN;
+
+	ret = palmas_read(palmas, PALMAS_GPIO_BASE, reg, &val);
+	if (ret < 0) {
+		dev_err(gc->parent, "Reg 0x%02x read failed, %d\n", reg, ret);
+		return ret;
+	}
+	return !!(val & BIT(offset));
+}
+
+static void palmas_gpio_set(struct gpio_chip *gc, unsigned offset,
+			int value)
+{
+	struct palmas_gpio *pg = gpiochip_get_data(gc);
+	struct palmas *palmas = pg->palmas;
+	int ret;
+	unsigned int reg;
+	int gpio16 = (offset/8);
+
+	offset %= 8;
+	if (gpio16)
+		reg = (value) ?
+			PALMAS_GPIO_SET_DATA_OUT2 : PALMAS_GPIO_CLEAR_DATA_OUT2;
+	else
+		reg = (value) ?
+			PALMAS_GPIO_SET_DATA_OUT : PALMAS_GPIO_CLEAR_DATA_OUT;
+
+	ret = palmas_write(palmas, PALMAS_GPIO_BASE, reg, BIT(offset));
+	if (ret < 0)
+		dev_err(gc->parent, "Reg 0x%02x write failed, %d\n", reg, ret);
+}
+
+static int palmas_gpio_output(struct gpio_chip *gc, unsigned offset,
+				int value)
+{
+	struct palmas_gpio *pg = gpiochip_get_data(gc);
+	struct palmas *palmas = pg->palmas;
+	int ret;
+	unsigned int reg;
+	int gpio16 = (offset/8);
+
+	offset %= 8;
+	reg = (gpio16) ? PALMAS_GPIO_DATA_DIR2 : PALMAS_GPIO_DATA_DIR;
+
+	/* Set the initial value */
+	palmas_gpio_set(gc, offset, value);
+
+	ret = palmas_update_bits(palmas, PALMAS_GPIO_BASE, reg,
+				BIT(offset), BIT(offset));
+	if (ret < 0)
+		dev_err(gc->parent, "Reg 0x%02x update failed, %d\n", reg,
+			ret);
+	return ret;
+}
+
+static int palmas_gpio_input(struct gpio_chip *gc, unsigned offset)
+{
+	struct palmas_gpio *pg = gpiochip_get_data(gc);
+	struct palmas *palmas = pg->palmas;
+	int ret;
+	unsigned int reg;
+	int gpio16 = (offset/8);
+
+	offset %= 8;
+	reg = (gpio16) ? PALMAS_GPIO_DATA_DIR2 : PALMAS_GPIO_DATA_DIR;
+
+	ret = palmas_update_bits(palmas, PALMAS_GPIO_BASE, reg, BIT(offset), 0);
+	if (ret < 0)
+		dev_err(gc->parent, "Reg 0x%02x update failed, %d\n", reg,
+			ret);
+	return ret;
+}
+
+static int palmas_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
+{
+	struct palmas_gpio *pg = gpiochip_get_data(gc);
+	struct palmas *palmas = pg->palmas;
+
+	return palmas_irq_get_virq(palmas, PALMAS_GPIO_0_IRQ + offset);
+}
+
+static const struct palmas_device_data palmas_dev_data = {
+	.ngpio = 8,
+};
+
+static const struct palmas_device_data tps80036_dev_data = {
+	.ngpio = 16,
+};
+
+static const struct of_device_id of_palmas_gpio_match[] = {
+	{ .compatible = "ti,palmas-gpio", .data = &palmas_dev_data,},
+	{ .compatible = "ti,tps65913-gpio", .data = &palmas_dev_data,},
+	{ .compatible = "ti,tps65914-gpio", .data = &palmas_dev_data,},
+	{ .compatible = "ti,tps80036-gpio", .data = &tps80036_dev_data,},
+	{ },
+};
+
+static int palmas_gpio_probe(struct platform_device *pdev)
+{
+	struct palmas *palmas = dev_get_drvdata(pdev->dev.parent);
+	struct palmas_platform_data *palmas_pdata;
+	struct palmas_gpio *palmas_gpio;
+	int ret;
+	const struct palmas_device_data *dev_data;
+
+	dev_data = of_device_get_match_data(&pdev->dev);
+	if (!dev_data)
+		dev_data = &palmas_dev_data;
+
+	palmas_gpio = devm_kzalloc(&pdev->dev,
+				sizeof(*palmas_gpio), GFP_KERNEL);
+	if (!palmas_gpio)
+		return -ENOMEM;
+
+	palmas_gpio->palmas = palmas;
+	palmas_gpio->gpio_chip.owner = THIS_MODULE;
+	palmas_gpio->gpio_chip.label = dev_name(&pdev->dev);
+	palmas_gpio->gpio_chip.ngpio = dev_data->ngpio;
+	palmas_gpio->gpio_chip.can_sleep = true;
+	palmas_gpio->gpio_chip.direction_input = palmas_gpio_input;
+	palmas_gpio->gpio_chip.direction_output = palmas_gpio_output;
+	palmas_gpio->gpio_chip.to_irq = palmas_gpio_to_irq;
+	palmas_gpio->gpio_chip.set	= palmas_gpio_set;
+	palmas_gpio->gpio_chip.get	= palmas_gpio_get;
+	palmas_gpio->gpio_chip.parent = &pdev->dev;
+#ifdef CONFIG_OF_GPIO
+	palmas_gpio->gpio_chip.of_node = pdev->dev.of_node;
+#endif
+	palmas_pdata = dev_get_platdata(palmas->dev);
+	if (palmas_pdata && palmas_pdata->gpio_base)
+		palmas_gpio->gpio_chip.base = palmas_pdata->gpio_base;
+	else
+		palmas_gpio->gpio_chip.base = -1;
+
+	ret = devm_gpiochip_add_data(&pdev->dev, &palmas_gpio->gpio_chip,
+				     palmas_gpio);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, palmas_gpio);
+	return ret;
+}
+
+static struct platform_driver palmas_gpio_driver = {
+	.driver.name	= "palmas-gpio",
+	.driver.of_match_table = of_palmas_gpio_match,
+	.probe		= palmas_gpio_probe,
+};
+
+static int __init palmas_gpio_init(void)
+{
+	return platform_driver_register(&palmas_gpio_driver);
+}
+subsys_initcall(palmas_gpio_init);
diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c
new file mode 100644
index 000000000..3ad1a9e43
--- /dev/null
+++ b/drivers/gpio/gpio-pca953x.c
@@ -0,0 +1,1291 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  PCA953x 4/8/16/24/40 bit I/O ports
+ *
+ *  Copyright (C) 2005 Ben Gardner <bgardner@wabtec.com>
+ *  Copyright (C) 2007 Marvell International Ltd.
+ *
+ *  Derived from drivers/i2c/chips/pca9539.c
+ */
+
+#include <linux/acpi.h>
+#include <linux/bitmap.h>
+#include <linux/gpio/driver.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_data/pca953x.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+
+#include <asm/unaligned.h>
+
+#define PCA953X_INPUT		0x00
+#define PCA953X_OUTPUT		0x01
+#define PCA953X_INVERT		0x02
+#define PCA953X_DIRECTION	0x03
+
+#define REG_ADDR_MASK		GENMASK(5, 0)
+#define REG_ADDR_EXT		BIT(6)
+#define REG_ADDR_AI		BIT(7)
+
+#define PCA957X_IN		0x00
+#define PCA957X_INVRT		0x01
+#define PCA957X_BKEN		0x02
+#define PCA957X_PUPD		0x03
+#define PCA957X_CFG		0x04
+#define PCA957X_OUT		0x05
+#define PCA957X_MSK		0x06
+#define PCA957X_INTS		0x07
+
+#define PCAL953X_OUT_STRENGTH	0x20
+#define PCAL953X_IN_LATCH	0x22
+#define PCAL953X_PULL_EN	0x23
+#define PCAL953X_PULL_SEL	0x24
+#define PCAL953X_INT_MASK	0x25
+#define PCAL953X_INT_STAT	0x26
+#define PCAL953X_OUT_CONF	0x27
+
+#define PCAL6524_INT_EDGE	0x28
+#define PCAL6524_INT_CLR	0x2a
+#define PCAL6524_IN_STATUS	0x2b
+#define PCAL6524_OUT_INDCONF	0x2c
+#define PCAL6524_DEBOUNCE	0x2d
+
+#define PCA_GPIO_MASK		GENMASK(7, 0)
+
+#define PCAL_GPIO_MASK		GENMASK(4, 0)
+#define PCAL_PINCTRL_MASK	GENMASK(6, 5)
+
+#define PCA_INT			BIT(8)
+#define PCA_PCAL		BIT(9)
+#define PCA_LATCH_INT		(PCA_PCAL | PCA_INT)
+#define PCA953X_TYPE		BIT(12)
+#define PCA957X_TYPE		BIT(13)
+#define PCA_TYPE_MASK		GENMASK(15, 12)
+
+#define PCA_CHIP_TYPE(x)	((x) & PCA_TYPE_MASK)
+
+static const struct i2c_device_id pca953x_id[] = {
+	{ "pca6416", 16 | PCA953X_TYPE | PCA_INT, },
+	{ "pca9505", 40 | PCA953X_TYPE | PCA_INT, },
+	{ "pca9534", 8  | PCA953X_TYPE | PCA_INT, },
+	{ "pca9535", 16 | PCA953X_TYPE | PCA_INT, },
+	{ "pca9536", 4  | PCA953X_TYPE, },
+	{ "pca9537", 4  | PCA953X_TYPE | PCA_INT, },
+	{ "pca9538", 8  | PCA953X_TYPE | PCA_INT, },
+	{ "pca9539", 16 | PCA953X_TYPE | PCA_INT, },
+	{ "pca9554", 8  | PCA953X_TYPE | PCA_INT, },
+	{ "pca9555", 16 | PCA953X_TYPE | PCA_INT, },
+	{ "pca9556", 8  | PCA953X_TYPE, },
+	{ "pca9557", 8  | PCA953X_TYPE, },
+	{ "pca9574", 8  | PCA957X_TYPE | PCA_INT, },
+	{ "pca9575", 16 | PCA957X_TYPE | PCA_INT, },
+	{ "pca9698", 40 | PCA953X_TYPE, },
+
+	{ "pcal6416", 16 | PCA953X_TYPE | PCA_LATCH_INT, },
+	{ "pcal6524", 24 | PCA953X_TYPE | PCA_LATCH_INT, },
+	{ "pcal9535", 16 | PCA953X_TYPE | PCA_LATCH_INT, },
+	{ "pcal9554b", 8  | PCA953X_TYPE | PCA_LATCH_INT, },
+	{ "pcal9555a", 16 | PCA953X_TYPE | PCA_LATCH_INT, },
+
+	{ "max7310", 8  | PCA953X_TYPE, },
+	{ "max7312", 16 | PCA953X_TYPE | PCA_INT, },
+	{ "max7313", 16 | PCA953X_TYPE | PCA_INT, },
+	{ "max7315", 8  | PCA953X_TYPE | PCA_INT, },
+	{ "max7318", 16 | PCA953X_TYPE | PCA_INT, },
+	{ "pca6107", 8  | PCA953X_TYPE | PCA_INT, },
+	{ "tca6408", 8  | PCA953X_TYPE | PCA_INT, },
+	{ "tca6416", 16 | PCA953X_TYPE | PCA_INT, },
+	{ "tca6424", 24 | PCA953X_TYPE | PCA_INT, },
+	{ "tca9539", 16 | PCA953X_TYPE | PCA_INT, },
+	{ "tca9554", 8  | PCA953X_TYPE | PCA_INT, },
+	{ "xra1202", 8  | PCA953X_TYPE },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, pca953x_id);
+
+#ifdef CONFIG_GPIO_PCA953X_IRQ
+
+#include <linux/dmi.h>
+
+static const struct acpi_gpio_params pca953x_irq_gpios = { 0, 0, true };
+
+static const struct acpi_gpio_mapping pca953x_acpi_irq_gpios[] = {
+	{ "irq-gpios", &pca953x_irq_gpios, 1, ACPI_GPIO_QUIRK_ABSOLUTE_NUMBER },
+	{ }
+};
+
+static int pca953x_acpi_get_irq(struct device *dev)
+{
+	int ret;
+
+	ret = devm_acpi_dev_add_driver_gpios(dev, pca953x_acpi_irq_gpios);
+	if (ret)
+		dev_warn(dev, "can't add GPIO ACPI mapping\n");
+
+	ret = acpi_dev_gpio_irq_get_by(ACPI_COMPANION(dev), "irq-gpios", 0);
+	if (ret < 0)
+		return ret;
+
+	dev_info(dev, "ACPI interrupt quirk (IRQ %d)\n", ret);
+	return ret;
+}
+
+static const struct dmi_system_id pca953x_dmi_acpi_irq_info[] = {
+	{
+		/*
+		 * On Intel Galileo Gen 2 board the IRQ pin of one of
+		 * the I²C GPIO expanders, which has GpioInt() resource,
+		 * is provided as an absolute number instead of being
+		 * relative. Since first controller (gpio-sch.c) and
+		 * second (gpio-dwapb.c) are at the fixed bases, we may
+		 * safely refer to the number in the global space to get
+		 * an IRQ out of it.
+		 */
+		.matches = {
+			DMI_EXACT_MATCH(DMI_BOARD_NAME, "GalileoGen2"),
+		},
+	},
+	{}
+};
+#endif
+
+static const struct acpi_device_id pca953x_acpi_ids[] = {
+	{ "INT3491", 16 | PCA953X_TYPE | PCA_LATCH_INT, },
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, pca953x_acpi_ids);
+
+#define MAX_BANK 5
+#define BANK_SZ 8
+#define MAX_LINE	(MAX_BANK * BANK_SZ)
+
+#define NBANK(chip) DIV_ROUND_UP(chip->gpio_chip.ngpio, BANK_SZ)
+
+struct pca953x_reg_config {
+	int direction;
+	int output;
+	int input;
+	int invert;
+};
+
+static const struct pca953x_reg_config pca953x_regs = {
+	.direction = PCA953X_DIRECTION,
+	.output = PCA953X_OUTPUT,
+	.input = PCA953X_INPUT,
+	.invert = PCA953X_INVERT,
+};
+
+static const struct pca953x_reg_config pca957x_regs = {
+	.direction = PCA957X_CFG,
+	.output = PCA957X_OUT,
+	.input = PCA957X_IN,
+	.invert = PCA957X_INVRT,
+};
+
+struct pca953x_chip {
+	unsigned gpio_start;
+	struct mutex i2c_lock;
+	struct regmap *regmap;
+
+#ifdef CONFIG_GPIO_PCA953X_IRQ
+	struct mutex irq_lock;
+	DECLARE_BITMAP(irq_mask, MAX_LINE);
+	DECLARE_BITMAP(irq_stat, MAX_LINE);
+	DECLARE_BITMAP(irq_trig_raise, MAX_LINE);
+	DECLARE_BITMAP(irq_trig_fall, MAX_LINE);
+	struct irq_chip irq_chip;
+#endif
+	atomic_t wakeup_path;
+
+	struct i2c_client *client;
+	struct gpio_chip gpio_chip;
+	const char *const *names;
+	unsigned long driver_data;
+	struct regulator *regulator;
+
+	const struct pca953x_reg_config *regs;
+};
+
+static int pca953x_bank_shift(struct pca953x_chip *chip)
+{
+	return fls((chip->gpio_chip.ngpio - 1) / BANK_SZ);
+}
+
+#define PCA953x_BANK_INPUT	BIT(0)
+#define PCA953x_BANK_OUTPUT	BIT(1)
+#define PCA953x_BANK_POLARITY	BIT(2)
+#define PCA953x_BANK_CONFIG	BIT(3)
+
+#define PCA957x_BANK_INPUT	BIT(0)
+#define PCA957x_BANK_POLARITY	BIT(1)
+#define PCA957x_BANK_BUSHOLD	BIT(2)
+#define PCA957x_BANK_CONFIG	BIT(4)
+#define PCA957x_BANK_OUTPUT	BIT(5)
+
+#define PCAL9xxx_BANK_IN_LATCH	BIT(8 + 2)
+#define PCAL9xxx_BANK_PULL_EN	BIT(8 + 3)
+#define PCAL9xxx_BANK_PULL_SEL	BIT(8 + 4)
+#define PCAL9xxx_BANK_IRQ_MASK	BIT(8 + 5)
+#define PCAL9xxx_BANK_IRQ_STAT	BIT(8 + 6)
+
+/*
+ * We care about the following registers:
+ * - Standard set, below 0x40, each port can be replicated up to 8 times
+ *   - PCA953x standard
+ *     Input port			0x00 + 0 * bank_size	R
+ *     Output port			0x00 + 1 * bank_size	RW
+ *     Polarity Inversion port		0x00 + 2 * bank_size	RW
+ *     Configuration port		0x00 + 3 * bank_size	RW
+ *   - PCA957x with mixed up registers
+ *     Input port			0x00 + 0 * bank_size	R
+ *     Polarity Inversion port		0x00 + 1 * bank_size	RW
+ *     Bus hold port			0x00 + 2 * bank_size	RW
+ *     Configuration port		0x00 + 4 * bank_size	RW
+ *     Output port			0x00 + 5 * bank_size	RW
+ *
+ * - Extended set, above 0x40, often chip specific.
+ *   - PCAL6524/PCAL9555A with custom PCAL IRQ handling:
+ *     Input latch register		0x40 + 2 * bank_size	RW
+ *     Pull-up/pull-down enable reg	0x40 + 3 * bank_size    RW
+ *     Pull-up/pull-down select reg	0x40 + 4 * bank_size    RW
+ *     Interrupt mask register		0x40 + 5 * bank_size	RW
+ *     Interrupt status register	0x40 + 6 * bank_size	R
+ *
+ * - Registers with bit 0x80 set, the AI bit
+ *   The bit is cleared and the registers fall into one of the
+ *   categories above.
+ */
+
+static bool pca953x_check_register(struct pca953x_chip *chip, unsigned int reg,
+				   u32 checkbank)
+{
+	int bank_shift = pca953x_bank_shift(chip);
+	int bank = (reg & REG_ADDR_MASK) >> bank_shift;
+	int offset = reg & (BIT(bank_shift) - 1);
+
+	/* Special PCAL extended register check. */
+	if (reg & REG_ADDR_EXT) {
+		if (!(chip->driver_data & PCA_PCAL))
+			return false;
+		bank += 8;
+	}
+
+	/* Register is not in the matching bank. */
+	if (!(BIT(bank) & checkbank))
+		return false;
+
+	/* Register is not within allowed range of bank. */
+	if (offset >= NBANK(chip))
+		return false;
+
+	return true;
+}
+
+static bool pca953x_readable_register(struct device *dev, unsigned int reg)
+{
+	struct pca953x_chip *chip = dev_get_drvdata(dev);
+	u32 bank;
+
+	if (PCA_CHIP_TYPE(chip->driver_data) == PCA953X_TYPE) {
+		bank = PCA953x_BANK_INPUT | PCA953x_BANK_OUTPUT |
+		       PCA953x_BANK_POLARITY | PCA953x_BANK_CONFIG;
+	} else {
+		bank = PCA957x_BANK_INPUT | PCA957x_BANK_OUTPUT |
+		       PCA957x_BANK_POLARITY | PCA957x_BANK_CONFIG |
+		       PCA957x_BANK_BUSHOLD;
+	}
+
+	if (chip->driver_data & PCA_PCAL) {
+		bank |= PCAL9xxx_BANK_IN_LATCH | PCAL9xxx_BANK_PULL_EN |
+			PCAL9xxx_BANK_PULL_SEL | PCAL9xxx_BANK_IRQ_MASK |
+			PCAL9xxx_BANK_IRQ_STAT;
+	}
+
+	return pca953x_check_register(chip, reg, bank);
+}
+
+static bool pca953x_writeable_register(struct device *dev, unsigned int reg)
+{
+	struct pca953x_chip *chip = dev_get_drvdata(dev);
+	u32 bank;
+
+	if (PCA_CHIP_TYPE(chip->driver_data) == PCA953X_TYPE) {
+		bank = PCA953x_BANK_OUTPUT | PCA953x_BANK_POLARITY |
+			PCA953x_BANK_CONFIG;
+	} else {
+		bank = PCA957x_BANK_OUTPUT | PCA957x_BANK_POLARITY |
+			PCA957x_BANK_CONFIG | PCA957x_BANK_BUSHOLD;
+	}
+
+	if (chip->driver_data & PCA_PCAL)
+		bank |= PCAL9xxx_BANK_IN_LATCH | PCAL9xxx_BANK_PULL_EN |
+			PCAL9xxx_BANK_PULL_SEL | PCAL9xxx_BANK_IRQ_MASK;
+
+	return pca953x_check_register(chip, reg, bank);
+}
+
+static bool pca953x_volatile_register(struct device *dev, unsigned int reg)
+{
+	struct pca953x_chip *chip = dev_get_drvdata(dev);
+	u32 bank;
+
+	if (PCA_CHIP_TYPE(chip->driver_data) == PCA953X_TYPE)
+		bank = PCA953x_BANK_INPUT;
+	else
+		bank = PCA957x_BANK_INPUT;
+
+	if (chip->driver_data & PCA_PCAL)
+		bank |= PCAL9xxx_BANK_IRQ_STAT;
+
+	return pca953x_check_register(chip, reg, bank);
+}
+
+static const struct regmap_config pca953x_i2c_regmap = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.use_single_read = true,
+	.use_single_write = true,
+
+	.readable_reg = pca953x_readable_register,
+	.writeable_reg = pca953x_writeable_register,
+	.volatile_reg = pca953x_volatile_register,
+
+	.disable_locking = true,
+	.cache_type = REGCACHE_RBTREE,
+	.max_register = 0x7f,
+};
+
+static const struct regmap_config pca953x_ai_i2c_regmap = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.read_flag_mask = REG_ADDR_AI,
+	.write_flag_mask = REG_ADDR_AI,
+
+	.readable_reg = pca953x_readable_register,
+	.writeable_reg = pca953x_writeable_register,
+	.volatile_reg = pca953x_volatile_register,
+
+	.disable_locking = true,
+	.cache_type = REGCACHE_RBTREE,
+	.max_register = 0x7f,
+};
+
+static u8 pca953x_recalc_addr(struct pca953x_chip *chip, int reg, int off)
+{
+	int bank_shift = pca953x_bank_shift(chip);
+	int addr = (reg & PCAL_GPIO_MASK) << bank_shift;
+	int pinctrl = (reg & PCAL_PINCTRL_MASK) << 1;
+	u8 regaddr = pinctrl | addr | (off / BANK_SZ);
+
+	return regaddr;
+}
+
+static int pca953x_write_regs(struct pca953x_chip *chip, int reg, unsigned long *val)
+{
+	u8 regaddr = pca953x_recalc_addr(chip, reg, 0);
+	u8 value[MAX_BANK];
+	int i, ret;
+
+	for (i = 0; i < NBANK(chip); i++)
+		value[i] = bitmap_get_value8(val, i * BANK_SZ);
+
+	ret = regmap_bulk_write(chip->regmap, regaddr, value, NBANK(chip));
+	if (ret < 0) {
+		dev_err(&chip->client->dev, "failed writing register\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int pca953x_read_regs(struct pca953x_chip *chip, int reg, unsigned long *val)
+{
+	u8 regaddr = pca953x_recalc_addr(chip, reg, 0);
+	u8 value[MAX_BANK];
+	int i, ret;
+
+	ret = regmap_bulk_read(chip->regmap, regaddr, value, NBANK(chip));
+	if (ret < 0) {
+		dev_err(&chip->client->dev, "failed reading register\n");
+		return ret;
+	}
+
+	for (i = 0; i < NBANK(chip); i++)
+		bitmap_set_value8(val, value[i], i * BANK_SZ);
+
+	return 0;
+}
+
+static int pca953x_gpio_direction_input(struct gpio_chip *gc, unsigned off)
+{
+	struct pca953x_chip *chip = gpiochip_get_data(gc);
+	u8 dirreg = pca953x_recalc_addr(chip, chip->regs->direction, off);
+	u8 bit = BIT(off % BANK_SZ);
+	int ret;
+
+	mutex_lock(&chip->i2c_lock);
+	ret = regmap_write_bits(chip->regmap, dirreg, bit, bit);
+	mutex_unlock(&chip->i2c_lock);
+	return ret;
+}
+
+static int pca953x_gpio_direction_output(struct gpio_chip *gc,
+		unsigned off, int val)
+{
+	struct pca953x_chip *chip = gpiochip_get_data(gc);
+	u8 dirreg = pca953x_recalc_addr(chip, chip->regs->direction, off);
+	u8 outreg = pca953x_recalc_addr(chip, chip->regs->output, off);
+	u8 bit = BIT(off % BANK_SZ);
+	int ret;
+
+	mutex_lock(&chip->i2c_lock);
+	/* set output level */
+	ret = regmap_write_bits(chip->regmap, outreg, bit, val ? bit : 0);
+	if (ret)
+		goto exit;
+
+	/* then direction */
+	ret = regmap_write_bits(chip->regmap, dirreg, bit, 0);
+exit:
+	mutex_unlock(&chip->i2c_lock);
+	return ret;
+}
+
+static int pca953x_gpio_get_value(struct gpio_chip *gc, unsigned off)
+{
+	struct pca953x_chip *chip = gpiochip_get_data(gc);
+	u8 inreg = pca953x_recalc_addr(chip, chip->regs->input, off);
+	u8 bit = BIT(off % BANK_SZ);
+	u32 reg_val;
+	int ret;
+
+	mutex_lock(&chip->i2c_lock);
+	ret = regmap_read(chip->regmap, inreg, &reg_val);
+	mutex_unlock(&chip->i2c_lock);
+	if (ret < 0)
+		return ret;
+
+	return !!(reg_val & bit);
+}
+
+static void pca953x_gpio_set_value(struct gpio_chip *gc, unsigned off, int val)
+{
+	struct pca953x_chip *chip = gpiochip_get_data(gc);
+	u8 outreg = pca953x_recalc_addr(chip, chip->regs->output, off);
+	u8 bit = BIT(off % BANK_SZ);
+
+	mutex_lock(&chip->i2c_lock);
+	regmap_write_bits(chip->regmap, outreg, bit, val ? bit : 0);
+	mutex_unlock(&chip->i2c_lock);
+}
+
+static int pca953x_gpio_get_direction(struct gpio_chip *gc, unsigned off)
+{
+	struct pca953x_chip *chip = gpiochip_get_data(gc);
+	u8 dirreg = pca953x_recalc_addr(chip, chip->regs->direction, off);
+	u8 bit = BIT(off % BANK_SZ);
+	u32 reg_val;
+	int ret;
+
+	mutex_lock(&chip->i2c_lock);
+	ret = regmap_read(chip->regmap, dirreg, &reg_val);
+	mutex_unlock(&chip->i2c_lock);
+	if (ret < 0)
+		return ret;
+
+	if (reg_val & bit)
+		return GPIO_LINE_DIRECTION_IN;
+
+	return GPIO_LINE_DIRECTION_OUT;
+}
+
+static int pca953x_gpio_get_multiple(struct gpio_chip *gc,
+				     unsigned long *mask, unsigned long *bits)
+{
+	struct pca953x_chip *chip = gpiochip_get_data(gc);
+	DECLARE_BITMAP(reg_val, MAX_LINE);
+	int ret;
+
+	mutex_lock(&chip->i2c_lock);
+	ret = pca953x_read_regs(chip, chip->regs->input, reg_val);
+	mutex_unlock(&chip->i2c_lock);
+	if (ret)
+		return ret;
+
+	bitmap_replace(bits, bits, reg_val, mask, gc->ngpio);
+	return 0;
+}
+
+static void pca953x_gpio_set_multiple(struct gpio_chip *gc,
+				      unsigned long *mask, unsigned long *bits)
+{
+	struct pca953x_chip *chip = gpiochip_get_data(gc);
+	DECLARE_BITMAP(reg_val, MAX_LINE);
+	int ret;
+
+	mutex_lock(&chip->i2c_lock);
+	ret = pca953x_read_regs(chip, chip->regs->output, reg_val);
+	if (ret)
+		goto exit;
+
+	bitmap_replace(reg_val, reg_val, bits, mask, gc->ngpio);
+
+	pca953x_write_regs(chip, chip->regs->output, reg_val);
+exit:
+	mutex_unlock(&chip->i2c_lock);
+}
+
+static int pca953x_gpio_set_pull_up_down(struct pca953x_chip *chip,
+					 unsigned int offset,
+					 unsigned long config)
+{
+	u8 pull_en_reg = pca953x_recalc_addr(chip, PCAL953X_PULL_EN, offset);
+	u8 pull_sel_reg = pca953x_recalc_addr(chip, PCAL953X_PULL_SEL, offset);
+	u8 bit = BIT(offset % BANK_SZ);
+	int ret;
+
+	/*
+	 * pull-up/pull-down configuration requires PCAL extended
+	 * registers
+	 */
+	if (!(chip->driver_data & PCA_PCAL))
+		return -ENOTSUPP;
+
+	mutex_lock(&chip->i2c_lock);
+
+	/* Configure pull-up/pull-down */
+	if (config == PIN_CONFIG_BIAS_PULL_UP)
+		ret = regmap_write_bits(chip->regmap, pull_sel_reg, bit, bit);
+	else if (config == PIN_CONFIG_BIAS_PULL_DOWN)
+		ret = regmap_write_bits(chip->regmap, pull_sel_reg, bit, 0);
+	else
+		ret = 0;
+	if (ret)
+		goto exit;
+
+	/* Disable/Enable pull-up/pull-down */
+	if (config == PIN_CONFIG_BIAS_DISABLE)
+		ret = regmap_write_bits(chip->regmap, pull_en_reg, bit, 0);
+	else
+		ret = regmap_write_bits(chip->regmap, pull_en_reg, bit, bit);
+
+exit:
+	mutex_unlock(&chip->i2c_lock);
+	return ret;
+}
+
+static int pca953x_gpio_set_config(struct gpio_chip *gc, unsigned int offset,
+				   unsigned long config)
+{
+	struct pca953x_chip *chip = gpiochip_get_data(gc);
+
+	switch (pinconf_to_config_param(config)) {
+	case PIN_CONFIG_BIAS_PULL_UP:
+	case PIN_CONFIG_BIAS_PULL_PIN_DEFAULT:
+	case PIN_CONFIG_BIAS_PULL_DOWN:
+	case PIN_CONFIG_BIAS_DISABLE:
+		return pca953x_gpio_set_pull_up_down(chip, offset, config);
+	default:
+		return -ENOTSUPP;
+	}
+}
+
+static void pca953x_setup_gpio(struct pca953x_chip *chip, int gpios)
+{
+	struct gpio_chip *gc;
+
+	gc = &chip->gpio_chip;
+
+	gc->direction_input  = pca953x_gpio_direction_input;
+	gc->direction_output = pca953x_gpio_direction_output;
+	gc->get = pca953x_gpio_get_value;
+	gc->set = pca953x_gpio_set_value;
+	gc->get_direction = pca953x_gpio_get_direction;
+	gc->get_multiple = pca953x_gpio_get_multiple;
+	gc->set_multiple = pca953x_gpio_set_multiple;
+	gc->set_config = pca953x_gpio_set_config;
+	gc->can_sleep = true;
+
+	gc->base = chip->gpio_start;
+	gc->ngpio = gpios;
+	gc->label = dev_name(&chip->client->dev);
+	gc->parent = &chip->client->dev;
+	gc->owner = THIS_MODULE;
+	gc->names = chip->names;
+}
+
+#ifdef CONFIG_GPIO_PCA953X_IRQ
+static void pca953x_irq_mask(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct pca953x_chip *chip = gpiochip_get_data(gc);
+	irq_hw_number_t hwirq = irqd_to_hwirq(d);
+
+	clear_bit(hwirq, chip->irq_mask);
+}
+
+static void pca953x_irq_unmask(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct pca953x_chip *chip = gpiochip_get_data(gc);
+	irq_hw_number_t hwirq = irqd_to_hwirq(d);
+
+	set_bit(hwirq, chip->irq_mask);
+}
+
+static int pca953x_irq_set_wake(struct irq_data *d, unsigned int on)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct pca953x_chip *chip = gpiochip_get_data(gc);
+
+	if (on)
+		atomic_inc(&chip->wakeup_path);
+	else
+		atomic_dec(&chip->wakeup_path);
+
+	return irq_set_irq_wake(chip->client->irq, on);
+}
+
+static void pca953x_irq_bus_lock(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct pca953x_chip *chip = gpiochip_get_data(gc);
+
+	mutex_lock(&chip->irq_lock);
+}
+
+static void pca953x_irq_bus_sync_unlock(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct pca953x_chip *chip = gpiochip_get_data(gc);
+	DECLARE_BITMAP(irq_mask, MAX_LINE);
+	DECLARE_BITMAP(reg_direction, MAX_LINE);
+	int level;
+
+	if (chip->driver_data & PCA_PCAL) {
+		/* Enable latch on interrupt-enabled inputs */
+		pca953x_write_regs(chip, PCAL953X_IN_LATCH, chip->irq_mask);
+
+		bitmap_complement(irq_mask, chip->irq_mask, gc->ngpio);
+
+		/* Unmask enabled interrupts */
+		pca953x_write_regs(chip, PCAL953X_INT_MASK, irq_mask);
+	}
+
+	/* Switch direction to input if needed */
+	pca953x_read_regs(chip, chip->regs->direction, reg_direction);
+
+	bitmap_or(irq_mask, chip->irq_trig_fall, chip->irq_trig_raise, gc->ngpio);
+	bitmap_complement(reg_direction, reg_direction, gc->ngpio);
+	bitmap_and(irq_mask, irq_mask, reg_direction, gc->ngpio);
+
+	/* Look for any newly setup interrupt */
+	for_each_set_bit(level, irq_mask, gc->ngpio)
+		pca953x_gpio_direction_input(&chip->gpio_chip, level);
+
+	mutex_unlock(&chip->irq_lock);
+}
+
+static int pca953x_irq_set_type(struct irq_data *d, unsigned int type)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct pca953x_chip *chip = gpiochip_get_data(gc);
+	irq_hw_number_t hwirq = irqd_to_hwirq(d);
+
+	if (!(type & IRQ_TYPE_EDGE_BOTH)) {
+		dev_err(&chip->client->dev, "irq %d: unsupported type %d\n",
+			d->irq, type);
+		return -EINVAL;
+	}
+
+	assign_bit(hwirq, chip->irq_trig_fall, type & IRQ_TYPE_EDGE_FALLING);
+	assign_bit(hwirq, chip->irq_trig_raise, type & IRQ_TYPE_EDGE_RISING);
+
+	return 0;
+}
+
+static void pca953x_irq_shutdown(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct pca953x_chip *chip = gpiochip_get_data(gc);
+	irq_hw_number_t hwirq = irqd_to_hwirq(d);
+
+	clear_bit(hwirq, chip->irq_trig_raise);
+	clear_bit(hwirq, chip->irq_trig_fall);
+}
+
+static bool pca953x_irq_pending(struct pca953x_chip *chip, unsigned long *pending)
+{
+	struct gpio_chip *gc = &chip->gpio_chip;
+	DECLARE_BITMAP(reg_direction, MAX_LINE);
+	DECLARE_BITMAP(old_stat, MAX_LINE);
+	DECLARE_BITMAP(cur_stat, MAX_LINE);
+	DECLARE_BITMAP(new_stat, MAX_LINE);
+	DECLARE_BITMAP(trigger, MAX_LINE);
+	int ret;
+
+	if (chip->driver_data & PCA_PCAL) {
+		/* Read the current interrupt status from the device */
+		ret = pca953x_read_regs(chip, PCAL953X_INT_STAT, trigger);
+		if (ret)
+			return false;
+
+		/* Check latched inputs and clear interrupt status */
+		ret = pca953x_read_regs(chip, chip->regs->input, cur_stat);
+		if (ret)
+			return false;
+
+		/* Apply filter for rising/falling edge selection */
+		bitmap_replace(new_stat, chip->irq_trig_fall, chip->irq_trig_raise, cur_stat, gc->ngpio);
+
+		bitmap_and(pending, new_stat, trigger, gc->ngpio);
+
+		return !bitmap_empty(pending, gc->ngpio);
+	}
+
+	ret = pca953x_read_regs(chip, chip->regs->input, cur_stat);
+	if (ret)
+		return false;
+
+	/* Remove output pins from the equation */
+	pca953x_read_regs(chip, chip->regs->direction, reg_direction);
+
+	bitmap_copy(old_stat, chip->irq_stat, gc->ngpio);
+
+	bitmap_and(new_stat, cur_stat, reg_direction, gc->ngpio);
+	bitmap_xor(cur_stat, new_stat, old_stat, gc->ngpio);
+	bitmap_and(trigger, cur_stat, chip->irq_mask, gc->ngpio);
+
+	bitmap_copy(chip->irq_stat, new_stat, gc->ngpio);
+
+	if (bitmap_empty(trigger, gc->ngpio))
+		return false;
+
+	bitmap_and(cur_stat, chip->irq_trig_fall, old_stat, gc->ngpio);
+	bitmap_and(old_stat, chip->irq_trig_raise, new_stat, gc->ngpio);
+	bitmap_or(new_stat, old_stat, cur_stat, gc->ngpio);
+	bitmap_and(pending, new_stat, trigger, gc->ngpio);
+
+	return !bitmap_empty(pending, gc->ngpio);
+}
+
+static irqreturn_t pca953x_irq_handler(int irq, void *devid)
+{
+	struct pca953x_chip *chip = devid;
+	struct gpio_chip *gc = &chip->gpio_chip;
+	DECLARE_BITMAP(pending, MAX_LINE);
+	int level;
+	bool ret;
+
+	bitmap_zero(pending, MAX_LINE);
+
+	mutex_lock(&chip->i2c_lock);
+	ret = pca953x_irq_pending(chip, pending);
+	mutex_unlock(&chip->i2c_lock);
+
+	if (ret) {
+		ret = 0;
+
+		for_each_set_bit(level, pending, gc->ngpio) {
+			int nested_irq = irq_find_mapping(gc->irq.domain, level);
+
+			if (unlikely(nested_irq <= 0)) {
+				dev_warn_ratelimited(gc->parent, "unmapped interrupt %d\n", level);
+				continue;
+			}
+
+			handle_nested_irq(nested_irq);
+			ret = 1;
+		}
+	}
+
+	return IRQ_RETVAL(ret);
+}
+
+static int pca953x_irq_setup(struct pca953x_chip *chip, int irq_base)
+{
+	struct i2c_client *client = chip->client;
+	struct irq_chip *irq_chip = &chip->irq_chip;
+	DECLARE_BITMAP(reg_direction, MAX_LINE);
+	DECLARE_BITMAP(irq_stat, MAX_LINE);
+	struct gpio_irq_chip *girq;
+	int ret;
+
+	if (dmi_first_match(pca953x_dmi_acpi_irq_info)) {
+		ret = pca953x_acpi_get_irq(&client->dev);
+		if (ret > 0)
+			client->irq = ret;
+	}
+
+	if (!client->irq)
+		return 0;
+
+	if (irq_base == -1)
+		return 0;
+
+	if (!(chip->driver_data & PCA_INT))
+		return 0;
+
+	ret = pca953x_read_regs(chip, chip->regs->input, irq_stat);
+	if (ret)
+		return ret;
+
+	/*
+	 * There is no way to know which GPIO line generated the
+	 * interrupt.  We have to rely on the previous read for
+	 * this purpose.
+	 */
+	pca953x_read_regs(chip, chip->regs->direction, reg_direction);
+	bitmap_and(chip->irq_stat, irq_stat, reg_direction, chip->gpio_chip.ngpio);
+	mutex_init(&chip->irq_lock);
+
+	irq_chip->name = dev_name(&client->dev);
+	irq_chip->irq_mask = pca953x_irq_mask;
+	irq_chip->irq_unmask = pca953x_irq_unmask;
+	irq_chip->irq_set_wake = pca953x_irq_set_wake;
+	irq_chip->irq_bus_lock = pca953x_irq_bus_lock;
+	irq_chip->irq_bus_sync_unlock = pca953x_irq_bus_sync_unlock;
+	irq_chip->irq_set_type = pca953x_irq_set_type;
+	irq_chip->irq_shutdown = pca953x_irq_shutdown;
+
+	girq = &chip->gpio_chip.irq;
+	girq->chip = irq_chip;
+	/* This will let us handle the parent IRQ in the driver */
+	girq->parent_handler = NULL;
+	girq->num_parents = 0;
+	girq->parents = NULL;
+	girq->default_type = IRQ_TYPE_NONE;
+	girq->handler = handle_simple_irq;
+	girq->threaded = true;
+	girq->first = irq_base; /* FIXME: get rid of this */
+
+	ret = devm_request_threaded_irq(&client->dev, client->irq,
+					NULL, pca953x_irq_handler,
+					IRQF_ONESHOT | IRQF_SHARED,
+					dev_name(&client->dev), chip);
+	if (ret) {
+		dev_err(&client->dev, "failed to request irq %d\n",
+			client->irq);
+		return ret;
+	}
+
+	return 0;
+}
+
+#else /* CONFIG_GPIO_PCA953X_IRQ */
+static int pca953x_irq_setup(struct pca953x_chip *chip,
+			     int irq_base)
+{
+	struct i2c_client *client = chip->client;
+
+	if (client->irq && irq_base != -1 && (chip->driver_data & PCA_INT))
+		dev_warn(&client->dev, "interrupt support not compiled in\n");
+
+	return 0;
+}
+#endif
+
+static int device_pca95xx_init(struct pca953x_chip *chip, u32 invert)
+{
+	DECLARE_BITMAP(val, MAX_LINE);
+	u8 regaddr;
+	int ret;
+
+	regaddr = pca953x_recalc_addr(chip, chip->regs->output, 0);
+	ret = regcache_sync_region(chip->regmap, regaddr,
+				   regaddr + NBANK(chip) - 1);
+	if (ret)
+		goto out;
+
+	regaddr = pca953x_recalc_addr(chip, chip->regs->direction, 0);
+	ret = regcache_sync_region(chip->regmap, regaddr,
+				   regaddr + NBANK(chip) - 1);
+	if (ret)
+		goto out;
+
+	/* set platform specific polarity inversion */
+	if (invert)
+		bitmap_fill(val, MAX_LINE);
+	else
+		bitmap_zero(val, MAX_LINE);
+
+	ret = pca953x_write_regs(chip, chip->regs->invert, val);
+out:
+	return ret;
+}
+
+static int device_pca957x_init(struct pca953x_chip *chip, u32 invert)
+{
+	DECLARE_BITMAP(val, MAX_LINE);
+	unsigned int i;
+	int ret;
+
+	ret = device_pca95xx_init(chip, invert);
+	if (ret)
+		goto out;
+
+	/* To enable register 6, 7 to control pull up and pull down */
+	for (i = 0; i < NBANK(chip); i++)
+		bitmap_set_value8(val, 0x02, i * BANK_SZ);
+
+	ret = pca953x_write_regs(chip, PCA957X_BKEN, val);
+	if (ret)
+		goto out;
+
+	return 0;
+out:
+	return ret;
+}
+
+static int pca953x_probe(struct i2c_client *client,
+			 const struct i2c_device_id *i2c_id)
+{
+	struct pca953x_platform_data *pdata;
+	struct pca953x_chip *chip;
+	int irq_base = 0;
+	int ret;
+	u32 invert = 0;
+	struct regulator *reg;
+	const struct regmap_config *regmap_config;
+
+	chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
+	if (chip == NULL)
+		return -ENOMEM;
+
+	pdata = dev_get_platdata(&client->dev);
+	if (pdata) {
+		irq_base = pdata->irq_base;
+		chip->gpio_start = pdata->gpio_base;
+		invert = pdata->invert;
+		chip->names = pdata->names;
+	} else {
+		struct gpio_desc *reset_gpio;
+
+		chip->gpio_start = -1;
+		irq_base = 0;
+
+		/*
+		 * See if we need to de-assert a reset pin.
+		 *
+		 * There is no known ACPI-enabled platforms that are
+		 * using "reset" GPIO. Otherwise any of those platform
+		 * must use _DSD method with corresponding property.
+		 */
+		reset_gpio = devm_gpiod_get_optional(&client->dev, "reset",
+						     GPIOD_OUT_LOW);
+		if (IS_ERR(reset_gpio))
+			return PTR_ERR(reset_gpio);
+	}
+
+	chip->client = client;
+
+	reg = devm_regulator_get(&client->dev, "vcc");
+	if (IS_ERR(reg))
+		return dev_err_probe(&client->dev, PTR_ERR(reg), "reg get err\n");
+
+	ret = regulator_enable(reg);
+	if (ret) {
+		dev_err(&client->dev, "reg en err: %d\n", ret);
+		return ret;
+	}
+	chip->regulator = reg;
+
+	if (i2c_id) {
+		chip->driver_data = i2c_id->driver_data;
+	} else {
+		const void *match;
+
+		match = device_get_match_data(&client->dev);
+		if (!match) {
+			ret = -ENODEV;
+			goto err_exit;
+		}
+
+		chip->driver_data = (uintptr_t)match;
+	}
+
+	i2c_set_clientdata(client, chip);
+
+	pca953x_setup_gpio(chip, chip->driver_data & PCA_GPIO_MASK);
+
+	if (NBANK(chip) > 2 || PCA_CHIP_TYPE(chip->driver_data) == PCA957X_TYPE) {
+		dev_info(&client->dev, "using AI\n");
+		regmap_config = &pca953x_ai_i2c_regmap;
+	} else {
+		dev_info(&client->dev, "using no AI\n");
+		regmap_config = &pca953x_i2c_regmap;
+	}
+
+	chip->regmap = devm_regmap_init_i2c(client, regmap_config);
+	if (IS_ERR(chip->regmap)) {
+		ret = PTR_ERR(chip->regmap);
+		goto err_exit;
+	}
+
+	regcache_mark_dirty(chip->regmap);
+
+	mutex_init(&chip->i2c_lock);
+	/*
+	 * In case we have an i2c-mux controlled by a GPIO provided by an
+	 * expander using the same driver higher on the device tree, read the
+	 * i2c adapter nesting depth and use the retrieved value as lockdep
+	 * subclass for chip->i2c_lock.
+	 *
+	 * REVISIT: This solution is not complete. It protects us from lockdep
+	 * false positives when the expander controlling the i2c-mux is on
+	 * a different level on the device tree, but not when it's on the same
+	 * level on a different branch (in which case the subclass number
+	 * would be the same).
+	 *
+	 * TODO: Once a correct solution is developed, a similar fix should be
+	 * applied to all other i2c-controlled GPIO expanders (and potentially
+	 * regmap-i2c).
+	 */
+	lockdep_set_subclass(&chip->i2c_lock,
+			     i2c_adapter_depth(client->adapter));
+
+	/* initialize cached registers from their original values.
+	 * we can't share this chip with another i2c master.
+	 */
+
+	if (PCA_CHIP_TYPE(chip->driver_data) == PCA953X_TYPE) {
+		chip->regs = &pca953x_regs;
+		ret = device_pca95xx_init(chip, invert);
+	} else {
+		chip->regs = &pca957x_regs;
+		ret = device_pca957x_init(chip, invert);
+	}
+	if (ret)
+		goto err_exit;
+
+	ret = pca953x_irq_setup(chip, irq_base);
+	if (ret)
+		goto err_exit;
+
+	ret = devm_gpiochip_add_data(&client->dev, &chip->gpio_chip, chip);
+	if (ret)
+		goto err_exit;
+
+	if (pdata && pdata->setup) {
+		ret = pdata->setup(client, chip->gpio_chip.base,
+				   chip->gpio_chip.ngpio, pdata->context);
+		if (ret < 0)
+			dev_warn(&client->dev, "setup failed, %d\n", ret);
+	}
+
+	return 0;
+
+err_exit:
+	regulator_disable(chip->regulator);
+	return ret;
+}
+
+static int pca953x_remove(struct i2c_client *client)
+{
+	struct pca953x_platform_data *pdata = dev_get_platdata(&client->dev);
+	struct pca953x_chip *chip = i2c_get_clientdata(client);
+	int ret;
+
+	if (pdata && pdata->teardown) {
+		ret = pdata->teardown(client, chip->gpio_chip.base,
+				      chip->gpio_chip.ngpio, pdata->context);
+		if (ret < 0)
+			dev_err(&client->dev, "teardown failed, %d\n", ret);
+	} else {
+		ret = 0;
+	}
+
+	regulator_disable(chip->regulator);
+
+	return ret;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int pca953x_regcache_sync(struct device *dev)
+{
+	struct pca953x_chip *chip = dev_get_drvdata(dev);
+	int ret;
+	u8 regaddr;
+
+	/*
+	 * The ordering between direction and output is important,
+	 * sync these registers first and only then sync the rest.
+	 */
+	regaddr = pca953x_recalc_addr(chip, chip->regs->direction, 0);
+	ret = regcache_sync_region(chip->regmap, regaddr, regaddr + NBANK(chip) - 1);
+	if (ret) {
+		dev_err(dev, "Failed to sync GPIO dir registers: %d\n", ret);
+		return ret;
+	}
+
+	regaddr = pca953x_recalc_addr(chip, chip->regs->output, 0);
+	ret = regcache_sync_region(chip->regmap, regaddr, regaddr + NBANK(chip) - 1);
+	if (ret) {
+		dev_err(dev, "Failed to sync GPIO out registers: %d\n", ret);
+		return ret;
+	}
+
+#ifdef CONFIG_GPIO_PCA953X_IRQ
+	if (chip->driver_data & PCA_PCAL) {
+		regaddr = pca953x_recalc_addr(chip, PCAL953X_IN_LATCH, 0);
+		ret = regcache_sync_region(chip->regmap, regaddr,
+					   regaddr + NBANK(chip) - 1);
+		if (ret) {
+			dev_err(dev, "Failed to sync INT latch registers: %d\n",
+				ret);
+			return ret;
+		}
+
+		regaddr = pca953x_recalc_addr(chip, PCAL953X_INT_MASK, 0);
+		ret = regcache_sync_region(chip->regmap, regaddr,
+					   regaddr + NBANK(chip) - 1);
+		if (ret) {
+			dev_err(dev, "Failed to sync INT mask registers: %d\n",
+				ret);
+			return ret;
+		}
+	}
+#endif
+
+	return 0;
+}
+
+static int pca953x_suspend(struct device *dev)
+{
+	struct pca953x_chip *chip = dev_get_drvdata(dev);
+
+	mutex_lock(&chip->i2c_lock);
+	regcache_cache_only(chip->regmap, true);
+	mutex_unlock(&chip->i2c_lock);
+
+	if (atomic_read(&chip->wakeup_path))
+		device_set_wakeup_path(dev);
+	else
+		regulator_disable(chip->regulator);
+
+	return 0;
+}
+
+static int pca953x_resume(struct device *dev)
+{
+	struct pca953x_chip *chip = dev_get_drvdata(dev);
+	int ret;
+
+	if (!atomic_read(&chip->wakeup_path)) {
+		ret = regulator_enable(chip->regulator);
+		if (ret) {
+			dev_err(dev, "Failed to enable regulator: %d\n", ret);
+			return 0;
+		}
+	}
+
+	mutex_lock(&chip->i2c_lock);
+	regcache_cache_only(chip->regmap, false);
+	regcache_mark_dirty(chip->regmap);
+	ret = pca953x_regcache_sync(dev);
+	if (ret) {
+		mutex_unlock(&chip->i2c_lock);
+		return ret;
+	}
+
+	ret = regcache_sync(chip->regmap);
+	mutex_unlock(&chip->i2c_lock);
+	if (ret) {
+		dev_err(dev, "Failed to restore register map: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+#endif
+
+/* convenience to stop overlong match-table lines */
+#define OF_953X(__nrgpio, __int) (void *)(__nrgpio | PCA953X_TYPE | __int)
+#define OF_957X(__nrgpio, __int) (void *)(__nrgpio | PCA957X_TYPE | __int)
+
+static const struct of_device_id pca953x_dt_ids[] = {
+	{ .compatible = "nxp,pca6416", .data = OF_953X(16, PCA_INT), },
+	{ .compatible = "nxp,pca9505", .data = OF_953X(40, PCA_INT), },
+	{ .compatible = "nxp,pca9534", .data = OF_953X( 8, PCA_INT), },
+	{ .compatible = "nxp,pca9535", .data = OF_953X(16, PCA_INT), },
+	{ .compatible = "nxp,pca9536", .data = OF_953X( 4, 0), },
+	{ .compatible = "nxp,pca9537", .data = OF_953X( 4, PCA_INT), },
+	{ .compatible = "nxp,pca9538", .data = OF_953X( 8, PCA_INT), },
+	{ .compatible = "nxp,pca9539", .data = OF_953X(16, PCA_INT), },
+	{ .compatible = "nxp,pca9554", .data = OF_953X( 8, PCA_INT), },
+	{ .compatible = "nxp,pca9555", .data = OF_953X(16, PCA_INT), },
+	{ .compatible = "nxp,pca9556", .data = OF_953X( 8, 0), },
+	{ .compatible = "nxp,pca9557", .data = OF_953X( 8, 0), },
+	{ .compatible = "nxp,pca9574", .data = OF_957X( 8, PCA_INT), },
+	{ .compatible = "nxp,pca9575", .data = OF_957X(16, PCA_INT), },
+	{ .compatible = "nxp,pca9698", .data = OF_953X(40, 0), },
+
+	{ .compatible = "nxp,pcal6416", .data = OF_953X(16, PCA_LATCH_INT), },
+	{ .compatible = "nxp,pcal6524", .data = OF_953X(24, PCA_LATCH_INT), },
+	{ .compatible = "nxp,pcal9535", .data = OF_953X(16, PCA_LATCH_INT), },
+	{ .compatible = "nxp,pcal9554b", .data = OF_953X( 8, PCA_LATCH_INT), },
+	{ .compatible = "nxp,pcal9555a", .data = OF_953X(16, PCA_LATCH_INT), },
+
+	{ .compatible = "maxim,max7310", .data = OF_953X( 8, 0), },
+	{ .compatible = "maxim,max7312", .data = OF_953X(16, PCA_INT), },
+	{ .compatible = "maxim,max7313", .data = OF_953X(16, PCA_INT), },
+	{ .compatible = "maxim,max7315", .data = OF_953X( 8, PCA_INT), },
+	{ .compatible = "maxim,max7318", .data = OF_953X(16, PCA_INT), },
+
+	{ .compatible = "ti,pca6107", .data = OF_953X( 8, PCA_INT), },
+	{ .compatible = "ti,pca9536", .data = OF_953X( 4, 0), },
+	{ .compatible = "ti,tca6408", .data = OF_953X( 8, PCA_INT), },
+	{ .compatible = "ti,tca6416", .data = OF_953X(16, PCA_INT), },
+	{ .compatible = "ti,tca6424", .data = OF_953X(24, PCA_INT), },
+	{ .compatible = "ti,tca9539", .data = OF_953X(16, PCA_INT), },
+
+	{ .compatible = "onnn,cat9554", .data = OF_953X( 8, PCA_INT), },
+	{ .compatible = "onnn,pca9654", .data = OF_953X( 8, PCA_INT), },
+	{ .compatible = "onnn,pca9655", .data = OF_953X(16, PCA_INT), },
+
+	{ .compatible = "exar,xra1202", .data = OF_953X( 8, 0), },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(of, pca953x_dt_ids);
+
+static SIMPLE_DEV_PM_OPS(pca953x_pm_ops, pca953x_suspend, pca953x_resume);
+
+static struct i2c_driver pca953x_driver = {
+	.driver = {
+		.name	= "pca953x",
+		.pm	= &pca953x_pm_ops,
+		.of_match_table = pca953x_dt_ids,
+		.acpi_match_table = pca953x_acpi_ids,
+	},
+	.probe		= pca953x_probe,
+	.remove		= pca953x_remove,
+	.id_table	= pca953x_id,
+};
+
+static int __init pca953x_init(void)
+{
+	return i2c_add_driver(&pca953x_driver);
+}
+/* register after i2c postcore initcall and before
+ * subsys initcalls that may rely on these GPIOs
+ */
+subsys_initcall(pca953x_init);
+
+static void __exit pca953x_exit(void)
+{
+	i2c_del_driver(&pca953x_driver);
+}
+module_exit(pca953x_exit);
+
+MODULE_AUTHOR("eric miao <eric.miao@marvell.com>");
+MODULE_DESCRIPTION("GPIO expander driver for PCA953x");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/gpio-pca9570.c b/drivers/gpio/gpio-pca9570.c
new file mode 100644
index 000000000..cb2b2f735
--- /dev/null
+++ b/drivers/gpio/gpio-pca9570.c
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Driver for PCA9570 I2C GPO expander
+ *
+ * Copyright (C) 2020 Sungbo Eo <mans0n@gorani.run>
+ *
+ * Based on gpio-tpic2810.c
+ * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/
+ *	Andrew F. Davis <afd@ti.com>
+ */
+
+#include <linux/gpio/driver.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/property.h>
+
+/**
+ * struct pca9570 - GPIO driver data
+ * @chip: GPIO controller chip
+ * @lock: Protects write sequences
+ * @out: Buffer for device register
+ */
+struct pca9570 {
+	struct gpio_chip chip;
+	struct mutex lock;
+	u8 out;
+};
+
+static int pca9570_read(struct pca9570 *gpio, u8 *value)
+{
+	struct i2c_client *client = to_i2c_client(gpio->chip.parent);
+	int ret;
+
+	ret = i2c_smbus_read_byte(client);
+	if (ret < 0)
+		return ret;
+
+	*value = ret;
+	return 0;
+}
+
+static int pca9570_write(struct pca9570 *gpio, u8 value)
+{
+	struct i2c_client *client = to_i2c_client(gpio->chip.parent);
+
+	return i2c_smbus_write_byte(client, value);
+}
+
+static int pca9570_get_direction(struct gpio_chip *chip,
+				 unsigned offset)
+{
+	/* This device always output */
+	return GPIO_LINE_DIRECTION_OUT;
+}
+
+static int pca9570_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct pca9570 *gpio = gpiochip_get_data(chip);
+	u8 buffer;
+	int ret;
+
+	ret = pca9570_read(gpio, &buffer);
+	if (ret)
+		return ret;
+
+	return !!(buffer & BIT(offset));
+}
+
+static void pca9570_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct pca9570 *gpio = gpiochip_get_data(chip);
+	u8 buffer;
+	int ret;
+
+	mutex_lock(&gpio->lock);
+
+	buffer = gpio->out;
+	if (value)
+		buffer |= BIT(offset);
+	else
+		buffer &= ~BIT(offset);
+
+	ret = pca9570_write(gpio, buffer);
+	if (ret)
+		goto out;
+
+	gpio->out = buffer;
+
+out:
+	mutex_unlock(&gpio->lock);
+}
+
+static int pca9570_probe(struct i2c_client *client)
+{
+	struct pca9570 *gpio;
+
+	gpio = devm_kzalloc(&client->dev, sizeof(*gpio), GFP_KERNEL);
+	if (!gpio)
+		return -ENOMEM;
+
+	gpio->chip.label = client->name;
+	gpio->chip.parent = &client->dev;
+	gpio->chip.owner = THIS_MODULE;
+	gpio->chip.get_direction = pca9570_get_direction;
+	gpio->chip.get = pca9570_get;
+	gpio->chip.set = pca9570_set;
+	gpio->chip.base = -1;
+	gpio->chip.ngpio = (uintptr_t)device_get_match_data(&client->dev);
+	gpio->chip.can_sleep = true;
+
+	mutex_init(&gpio->lock);
+
+	/* Read the current output level */
+	pca9570_read(gpio, &gpio->out);
+
+	i2c_set_clientdata(client, gpio);
+
+	return devm_gpiochip_add_data(&client->dev, &gpio->chip, gpio);
+}
+
+static const struct i2c_device_id pca9570_id_table[] = {
+	{ "pca9570", 4 },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(i2c, pca9570_id_table);
+
+static const struct of_device_id pca9570_of_match_table[] = {
+	{ .compatible = "nxp,pca9570", .data = (void *)4 },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, pca9570_of_match_table);
+
+static struct i2c_driver pca9570_driver = {
+	.driver = {
+		.name = "pca9570",
+		.of_match_table = pca9570_of_match_table,
+	},
+	.probe_new = pca9570_probe,
+	.id_table = pca9570_id_table,
+};
+module_i2c_driver(pca9570_driver);
+
+MODULE_AUTHOR("Sungbo Eo <mans0n@gorani.run>");
+MODULE_DESCRIPTION("GPIO expander driver for PCA9570");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-pcf857x.c b/drivers/gpio/gpio-pcf857x.c
new file mode 100644
index 000000000..b7568ee33
--- /dev/null
+++ b/drivers/gpio/gpio-pcf857x.c
@@ -0,0 +1,450 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Driver for pcf857x, pca857x, and pca967x I2C GPIO expanders
+ *
+ * Copyright (C) 2007 David Brownell
+ */
+
+#include <linux/gpio/driver.h>
+#include <linux/i2c.h>
+#include <linux/platform_data/pcf857x.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+
+static const struct i2c_device_id pcf857x_id[] = {
+	{ "pcf8574", 8 },
+	{ "pcf8574a", 8 },
+	{ "pca8574", 8 },
+	{ "pca9670", 8 },
+	{ "pca9672", 8 },
+	{ "pca9674", 8 },
+	{ "pcf8575", 16 },
+	{ "pca8575", 16 },
+	{ "pca9671", 16 },
+	{ "pca9673", 16 },
+	{ "pca9675", 16 },
+	{ "max7328", 8 },
+	{ "max7329", 8 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, pcf857x_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id pcf857x_of_table[] = {
+	{ .compatible = "nxp,pcf8574" },
+	{ .compatible = "nxp,pcf8574a" },
+	{ .compatible = "nxp,pca8574" },
+	{ .compatible = "nxp,pca9670" },
+	{ .compatible = "nxp,pca9672" },
+	{ .compatible = "nxp,pca9674" },
+	{ .compatible = "nxp,pcf8575" },
+	{ .compatible = "nxp,pca8575" },
+	{ .compatible = "nxp,pca9671" },
+	{ .compatible = "nxp,pca9673" },
+	{ .compatible = "nxp,pca9675" },
+	{ .compatible = "maxim,max7328" },
+	{ .compatible = "maxim,max7329" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, pcf857x_of_table);
+#endif
+
+/*
+ * The pcf857x, pca857x, and pca967x chips only expose one read and one
+ * write register.  Writing a "one" bit (to match the reset state) lets
+ * that pin be used as an input; it's not an open-drain model, but acts
+ * a bit like one.  This is described as "quasi-bidirectional"; read the
+ * chip documentation for details.
+ *
+ * Many other I2C GPIO expander chips (like the pca953x models) have
+ * more complex register models and more conventional circuitry using
+ * push/pull drivers.  They often use the same 0x20..0x27 addresses as
+ * pcf857x parts, making the "legacy" I2C driver model problematic.
+ */
+struct pcf857x {
+	struct gpio_chip	chip;
+	struct irq_chip		irqchip;
+	struct i2c_client	*client;
+	struct mutex		lock;		/* protect 'out' */
+	unsigned		out;		/* software latch */
+	unsigned		status;		/* current status */
+	unsigned		irq_enabled;	/* enabled irqs */
+
+	int (*write)(struct i2c_client *client, unsigned data);
+	int (*read)(struct i2c_client *client);
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* Talk to 8-bit I/O expander */
+
+static int i2c_write_le8(struct i2c_client *client, unsigned data)
+{
+	return i2c_smbus_write_byte(client, data);
+}
+
+static int i2c_read_le8(struct i2c_client *client)
+{
+	return (int)i2c_smbus_read_byte(client);
+}
+
+/* Talk to 16-bit I/O expander */
+
+static int i2c_write_le16(struct i2c_client *client, unsigned word)
+{
+	u8 buf[2] = { word & 0xff, word >> 8, };
+	int status;
+
+	status = i2c_master_send(client, buf, 2);
+	return (status < 0) ? status : 0;
+}
+
+static int i2c_read_le16(struct i2c_client *client)
+{
+	u8 buf[2];
+	int status;
+
+	status = i2c_master_recv(client, buf, 2);
+	if (status < 0)
+		return status;
+	return (buf[1] << 8) | buf[0];
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int pcf857x_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct pcf857x	*gpio = gpiochip_get_data(chip);
+	int		status;
+
+	mutex_lock(&gpio->lock);
+	gpio->out |= (1 << offset);
+	status = gpio->write(gpio->client, gpio->out);
+	mutex_unlock(&gpio->lock);
+
+	return status;
+}
+
+static int pcf857x_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct pcf857x	*gpio = gpiochip_get_data(chip);
+	int		value;
+
+	value = gpio->read(gpio->client);
+	return (value < 0) ? value : !!(value & (1 << offset));
+}
+
+static int pcf857x_output(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct pcf857x	*gpio = gpiochip_get_data(chip);
+	unsigned	bit = 1 << offset;
+	int		status;
+
+	mutex_lock(&gpio->lock);
+	if (value)
+		gpio->out |= bit;
+	else
+		gpio->out &= ~bit;
+	status = gpio->write(gpio->client, gpio->out);
+	mutex_unlock(&gpio->lock);
+
+	return status;
+}
+
+static void pcf857x_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	pcf857x_output(chip, offset, value);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static irqreturn_t pcf857x_irq(int irq, void *data)
+{
+	struct pcf857x  *gpio = data;
+	unsigned long change, i, status;
+
+	status = gpio->read(gpio->client);
+
+	/*
+	 * call the interrupt handler iff gpio is used as
+	 * interrupt source, just to avoid bad irqs
+	 */
+	mutex_lock(&gpio->lock);
+	change = (gpio->status ^ status) & gpio->irq_enabled;
+	gpio->status = status;
+	mutex_unlock(&gpio->lock);
+
+	for_each_set_bit(i, &change, gpio->chip.ngpio)
+		handle_nested_irq(irq_find_mapping(gpio->chip.irq.domain, i));
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * NOP functions
+ */
+static void noop(struct irq_data *data) { }
+
+static int pcf857x_irq_set_wake(struct irq_data *data, unsigned int on)
+{
+	struct pcf857x *gpio = irq_data_get_irq_chip_data(data);
+
+	return irq_set_irq_wake(gpio->client->irq, on);
+}
+
+static void pcf857x_irq_enable(struct irq_data *data)
+{
+	struct pcf857x *gpio = irq_data_get_irq_chip_data(data);
+
+	gpio->irq_enabled |= (1 << data->hwirq);
+}
+
+static void pcf857x_irq_disable(struct irq_data *data)
+{
+	struct pcf857x *gpio = irq_data_get_irq_chip_data(data);
+
+	gpio->irq_enabled &= ~(1 << data->hwirq);
+}
+
+static void pcf857x_irq_bus_lock(struct irq_data *data)
+{
+	struct pcf857x *gpio = irq_data_get_irq_chip_data(data);
+
+	mutex_lock(&gpio->lock);
+}
+
+static void pcf857x_irq_bus_sync_unlock(struct irq_data *data)
+{
+	struct pcf857x *gpio = irq_data_get_irq_chip_data(data);
+
+	mutex_unlock(&gpio->lock);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int pcf857x_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct pcf857x_platform_data	*pdata = dev_get_platdata(&client->dev);
+	struct device_node		*np = client->dev.of_node;
+	struct pcf857x			*gpio;
+	unsigned int			n_latch = 0;
+	int				status;
+
+	if (IS_ENABLED(CONFIG_OF) && np)
+		of_property_read_u32(np, "lines-initial-states", &n_latch);
+	else if (pdata)
+		n_latch = pdata->n_latch;
+	else
+		dev_dbg(&client->dev, "no platform data\n");
+
+	/* Allocate, initialize, and register this gpio_chip. */
+	gpio = devm_kzalloc(&client->dev, sizeof(*gpio), GFP_KERNEL);
+	if (!gpio)
+		return -ENOMEM;
+
+	mutex_init(&gpio->lock);
+
+	gpio->chip.base			= pdata ? pdata->gpio_base : -1;
+	gpio->chip.can_sleep		= true;
+	gpio->chip.parent		= &client->dev;
+	gpio->chip.owner		= THIS_MODULE;
+	gpio->chip.get			= pcf857x_get;
+	gpio->chip.set			= pcf857x_set;
+	gpio->chip.direction_input	= pcf857x_input;
+	gpio->chip.direction_output	= pcf857x_output;
+	gpio->chip.ngpio		= id->driver_data;
+
+	/* NOTE:  the OnSemi jlc1562b is also largely compatible with
+	 * these parts, notably for output.  It has a low-resolution
+	 * DAC instead of pin change IRQs; and its inputs can be the
+	 * result of comparators.
+	 */
+
+	/* 8574 addresses are 0x20..0x27; 8574a uses 0x38..0x3f;
+	 * 9670, 9672, 9764, and 9764a use quite a variety.
+	 *
+	 * NOTE: we don't distinguish here between *4 and *4a parts.
+	 */
+	if (gpio->chip.ngpio == 8) {
+		gpio->write	= i2c_write_le8;
+		gpio->read	= i2c_read_le8;
+
+		if (!i2c_check_functionality(client->adapter,
+				I2C_FUNC_SMBUS_BYTE))
+			status = -EIO;
+
+		/* fail if there's no chip present */
+		else
+			status = i2c_smbus_read_byte(client);
+
+	/* '75/'75c addresses are 0x20..0x27, just like the '74;
+	 * the '75c doesn't have a current source pulling high.
+	 * 9671, 9673, and 9765 use quite a variety of addresses.
+	 *
+	 * NOTE: we don't distinguish here between '75 and '75c parts.
+	 */
+	} else if (gpio->chip.ngpio == 16) {
+		gpio->write	= i2c_write_le16;
+		gpio->read	= i2c_read_le16;
+
+		if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
+			status = -EIO;
+
+		/* fail if there's no chip present */
+		else
+			status = i2c_read_le16(client);
+
+	} else {
+		dev_dbg(&client->dev, "unsupported number of gpios\n");
+		status = -EINVAL;
+	}
+
+	if (status < 0)
+		goto fail;
+
+	gpio->chip.label = client->name;
+
+	gpio->client = client;
+	i2c_set_clientdata(client, gpio);
+
+	/* NOTE:  these chips have strange "quasi-bidirectional" I/O pins.
+	 * We can't actually know whether a pin is configured (a) as output
+	 * and driving the signal low, or (b) as input and reporting a low
+	 * value ... without knowing the last value written since the chip
+	 * came out of reset (if any).  We can't read the latched output.
+	 *
+	 * In short, the only reliable solution for setting up pin direction
+	 * is to do it explicitly.  The setup() method can do that, but it
+	 * may cause transient glitching since it can't know the last value
+	 * written (some pins may need to be driven low).
+	 *
+	 * Using n_latch avoids that trouble.  When left initialized to zero,
+	 * our software copy of the "latch" then matches the chip's all-ones
+	 * reset state.  Otherwise it flags pins to be driven low.
+	 */
+	gpio->out = ~n_latch;
+	gpio->status = gpio->read(gpio->client);
+
+	/* Enable irqchip if we have an interrupt */
+	if (client->irq) {
+		struct gpio_irq_chip *girq;
+
+		gpio->irqchip.name = "pcf857x";
+		gpio->irqchip.irq_enable = pcf857x_irq_enable;
+		gpio->irqchip.irq_disable = pcf857x_irq_disable;
+		gpio->irqchip.irq_ack = noop;
+		gpio->irqchip.irq_mask = noop;
+		gpio->irqchip.irq_unmask = noop;
+		gpio->irqchip.irq_set_wake = pcf857x_irq_set_wake;
+		gpio->irqchip.irq_bus_lock = pcf857x_irq_bus_lock;
+		gpio->irqchip.irq_bus_sync_unlock = pcf857x_irq_bus_sync_unlock;
+
+		status = devm_request_threaded_irq(&client->dev, client->irq,
+					NULL, pcf857x_irq, IRQF_ONESHOT |
+					IRQF_TRIGGER_FALLING | IRQF_SHARED,
+					dev_name(&client->dev), gpio);
+		if (status)
+			goto fail;
+
+		girq = &gpio->chip.irq;
+		girq->chip = &gpio->irqchip;
+		/* This will let us handle the parent IRQ in the driver */
+		girq->parent_handler = NULL;
+		girq->num_parents = 0;
+		girq->parents = NULL;
+		girq->default_type = IRQ_TYPE_NONE;
+		girq->handler = handle_level_irq;
+		girq->threaded = true;
+	}
+
+	status = devm_gpiochip_add_data(&client->dev, &gpio->chip, gpio);
+	if (status < 0)
+		goto fail;
+
+	/* Let platform code set up the GPIOs and their users.
+	 * Now is the first time anyone could use them.
+	 */
+	if (pdata && pdata->setup) {
+		status = pdata->setup(client,
+				gpio->chip.base, gpio->chip.ngpio,
+				pdata->context);
+		if (status < 0)
+			dev_warn(&client->dev, "setup --> %d\n", status);
+	}
+
+	dev_info(&client->dev, "probed\n");
+
+	return 0;
+
+fail:
+	dev_dbg(&client->dev, "probe error %d for '%s'\n", status,
+		client->name);
+
+	return status;
+}
+
+static int pcf857x_remove(struct i2c_client *client)
+{
+	struct pcf857x_platform_data	*pdata = dev_get_platdata(&client->dev);
+	struct pcf857x			*gpio = i2c_get_clientdata(client);
+	int				status = 0;
+
+	if (pdata && pdata->teardown) {
+		status = pdata->teardown(client,
+				gpio->chip.base, gpio->chip.ngpio,
+				pdata->context);
+		if (status < 0) {
+			dev_err(&client->dev, "%s --> %d\n",
+					"teardown", status);
+			return status;
+		}
+	}
+
+	return status;
+}
+
+static void pcf857x_shutdown(struct i2c_client *client)
+{
+	struct pcf857x *gpio = i2c_get_clientdata(client);
+
+	/* Drive all the I/O lines high */
+	gpio->write(gpio->client, BIT(gpio->chip.ngpio) - 1);
+}
+
+static struct i2c_driver pcf857x_driver = {
+	.driver = {
+		.name	= "pcf857x",
+		.of_match_table = of_match_ptr(pcf857x_of_table),
+	},
+	.probe	= pcf857x_probe,
+	.remove	= pcf857x_remove,
+	.shutdown = pcf857x_shutdown,
+	.id_table = pcf857x_id,
+};
+
+static int __init pcf857x_init(void)
+{
+	return i2c_add_driver(&pcf857x_driver);
+}
+/* register after i2c postcore initcall and before
+ * subsys initcalls that may rely on these GPIOs
+ */
+subsys_initcall(pcf857x_init);
+
+static void __exit pcf857x_exit(void)
+{
+	i2c_del_driver(&pcf857x_driver);
+}
+module_exit(pcf857x_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Brownell");
diff --git a/drivers/gpio/gpio-pch.c b/drivers/gpio/gpio-pch.c
new file mode 100644
index 000000000..a552df298
--- /dev/null
+++ b/drivers/gpio/gpio-pch.c
@@ -0,0 +1,462 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2011 LAPIS Semiconductor Co., Ltd.
+ */
+#include <linux/bits.h>
+#include <linux/gpio/driver.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+
+#define PCH_EDGE_FALLING	0
+#define PCH_EDGE_RISING		1
+#define PCH_LEVEL_L		2
+#define PCH_LEVEL_H		3
+#define PCH_EDGE_BOTH		4
+#define PCH_IM_MASK		GENMASK(2, 0)
+
+#define PCH_IRQ_BASE		24
+
+struct pch_regs {
+	u32	ien;
+	u32	istatus;
+	u32	idisp;
+	u32	iclr;
+	u32	imask;
+	u32	imaskclr;
+	u32	po;
+	u32	pi;
+	u32	pm;
+	u32	im0;
+	u32	im1;
+	u32	reserved[3];
+	u32	gpio_use_sel;
+	u32	reset;
+};
+
+enum pch_type_t {
+	INTEL_EG20T_PCH,
+	OKISEMI_ML7223m_IOH, /* LAPIS Semiconductor ML7223 IOH PCIe Bus-m */
+	OKISEMI_ML7223n_IOH  /* LAPIS Semiconductor ML7223 IOH PCIe Bus-n */
+};
+
+/* Specifies number of GPIO PINS */
+static int gpio_pins[] = {
+	[INTEL_EG20T_PCH] = 12,
+	[OKISEMI_ML7223m_IOH] = 8,
+	[OKISEMI_ML7223n_IOH] = 8,
+};
+
+/**
+ * struct pch_gpio_reg_data - The register store data.
+ * @ien_reg:	To store contents of IEN register.
+ * @imask_reg:	To store contents of IMASK register.
+ * @po_reg:	To store contents of PO register.
+ * @pm_reg:	To store contents of PM register.
+ * @im0_reg:	To store contents of IM0 register.
+ * @im1_reg:	To store contents of IM1 register.
+ * @gpio_use_sel_reg : To store contents of GPIO_USE_SEL register.
+ *		       (Only ML7223 Bus-n)
+ */
+struct pch_gpio_reg_data {
+	u32 ien_reg;
+	u32 imask_reg;
+	u32 po_reg;
+	u32 pm_reg;
+	u32 im0_reg;
+	u32 im1_reg;
+	u32 gpio_use_sel_reg;
+};
+
+/**
+ * struct pch_gpio - GPIO private data structure.
+ * @base:			PCI base address of Memory mapped I/O register.
+ * @reg:			Memory mapped PCH GPIO register list.
+ * @dev:			Pointer to device structure.
+ * @gpio:			Data for GPIO infrastructure.
+ * @pch_gpio_reg:		Memory mapped Register data is saved here
+ *				when suspend.
+ * @lock:			Used for register access protection
+ * @irq_base:		Save base of IRQ number for interrupt
+ * @ioh:		IOH ID
+ * @spinlock:		Used for register access protection
+ */
+struct pch_gpio {
+	void __iomem *base;
+	struct pch_regs __iomem *reg;
+	struct device *dev;
+	struct gpio_chip gpio;
+	struct pch_gpio_reg_data pch_gpio_reg;
+	int irq_base;
+	enum pch_type_t ioh;
+	spinlock_t spinlock;
+};
+
+static void pch_gpio_set(struct gpio_chip *gpio, unsigned int nr, int val)
+{
+	u32 reg_val;
+	struct pch_gpio *chip =	gpiochip_get_data(gpio);
+	unsigned long flags;
+
+	spin_lock_irqsave(&chip->spinlock, flags);
+	reg_val = ioread32(&chip->reg->po);
+	if (val)
+		reg_val |= BIT(nr);
+	else
+		reg_val &= ~BIT(nr);
+
+	iowrite32(reg_val, &chip->reg->po);
+	spin_unlock_irqrestore(&chip->spinlock, flags);
+}
+
+static int pch_gpio_get(struct gpio_chip *gpio, unsigned int nr)
+{
+	struct pch_gpio *chip =	gpiochip_get_data(gpio);
+
+	return !!(ioread32(&chip->reg->pi) & BIT(nr));
+}
+
+static int pch_gpio_direction_output(struct gpio_chip *gpio, unsigned int nr,
+				     int val)
+{
+	struct pch_gpio *chip =	gpiochip_get_data(gpio);
+	u32 pm;
+	u32 reg_val;
+	unsigned long flags;
+
+	spin_lock_irqsave(&chip->spinlock, flags);
+
+	reg_val = ioread32(&chip->reg->po);
+	if (val)
+		reg_val |= BIT(nr);
+	else
+		reg_val &= ~BIT(nr);
+	iowrite32(reg_val, &chip->reg->po);
+
+	pm = ioread32(&chip->reg->pm);
+	pm &= BIT(gpio_pins[chip->ioh]) - 1;
+	pm |= BIT(nr);
+	iowrite32(pm, &chip->reg->pm);
+
+	spin_unlock_irqrestore(&chip->spinlock, flags);
+
+	return 0;
+}
+
+static int pch_gpio_direction_input(struct gpio_chip *gpio, unsigned int nr)
+{
+	struct pch_gpio *chip =	gpiochip_get_data(gpio);
+	u32 pm;
+	unsigned long flags;
+
+	spin_lock_irqsave(&chip->spinlock, flags);
+	pm = ioread32(&chip->reg->pm);
+	pm &= BIT(gpio_pins[chip->ioh]) - 1;
+	pm &= ~BIT(nr);
+	iowrite32(pm, &chip->reg->pm);
+	spin_unlock_irqrestore(&chip->spinlock, flags);
+
+	return 0;
+}
+
+/*
+ * Save register configuration and disable interrupts.
+ */
+static void __maybe_unused pch_gpio_save_reg_conf(struct pch_gpio *chip)
+{
+	chip->pch_gpio_reg.ien_reg = ioread32(&chip->reg->ien);
+	chip->pch_gpio_reg.imask_reg = ioread32(&chip->reg->imask);
+	chip->pch_gpio_reg.po_reg = ioread32(&chip->reg->po);
+	chip->pch_gpio_reg.pm_reg = ioread32(&chip->reg->pm);
+	chip->pch_gpio_reg.im0_reg = ioread32(&chip->reg->im0);
+	if (chip->ioh == INTEL_EG20T_PCH)
+		chip->pch_gpio_reg.im1_reg = ioread32(&chip->reg->im1);
+	if (chip->ioh == OKISEMI_ML7223n_IOH)
+		chip->pch_gpio_reg.gpio_use_sel_reg = ioread32(&chip->reg->gpio_use_sel);
+}
+
+/*
+ * This function restores the register configuration of the GPIO device.
+ */
+static void __maybe_unused pch_gpio_restore_reg_conf(struct pch_gpio *chip)
+{
+	iowrite32(chip->pch_gpio_reg.ien_reg, &chip->reg->ien);
+	iowrite32(chip->pch_gpio_reg.imask_reg, &chip->reg->imask);
+	/* to store contents of PO register */
+	iowrite32(chip->pch_gpio_reg.po_reg, &chip->reg->po);
+	/* to store contents of PM register */
+	iowrite32(chip->pch_gpio_reg.pm_reg, &chip->reg->pm);
+	iowrite32(chip->pch_gpio_reg.im0_reg, &chip->reg->im0);
+	if (chip->ioh == INTEL_EG20T_PCH)
+		iowrite32(chip->pch_gpio_reg.im1_reg, &chip->reg->im1);
+	if (chip->ioh == OKISEMI_ML7223n_IOH)
+		iowrite32(chip->pch_gpio_reg.gpio_use_sel_reg, &chip->reg->gpio_use_sel);
+}
+
+static int pch_gpio_to_irq(struct gpio_chip *gpio, unsigned int offset)
+{
+	struct pch_gpio *chip = gpiochip_get_data(gpio);
+
+	return chip->irq_base + offset;
+}
+
+static void pch_gpio_setup(struct pch_gpio *chip)
+{
+	struct gpio_chip *gpio = &chip->gpio;
+
+	gpio->label = dev_name(chip->dev);
+	gpio->parent = chip->dev;
+	gpio->owner = THIS_MODULE;
+	gpio->direction_input = pch_gpio_direction_input;
+	gpio->get = pch_gpio_get;
+	gpio->direction_output = pch_gpio_direction_output;
+	gpio->set = pch_gpio_set;
+	gpio->base = -1;
+	gpio->ngpio = gpio_pins[chip->ioh];
+	gpio->can_sleep = false;
+	gpio->to_irq = pch_gpio_to_irq;
+}
+
+static int pch_irq_type(struct irq_data *d, unsigned int type)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	struct pch_gpio *chip = gc->private;
+	u32 im, im_pos, val;
+	u32 __iomem *im_reg;
+	unsigned long flags;
+	int ch, irq = d->irq;
+
+	ch = irq - chip->irq_base;
+	if (irq < chip->irq_base + 8) {
+		im_reg = &chip->reg->im0;
+		im_pos = ch - 0;
+	} else {
+		im_reg = &chip->reg->im1;
+		im_pos = ch - 8;
+	}
+	dev_dbg(chip->dev, "irq=%d type=%d ch=%d pos=%d\n", irq, type, ch, im_pos);
+
+	switch (type) {
+	case IRQ_TYPE_EDGE_RISING:
+		val = PCH_EDGE_RISING;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		val = PCH_EDGE_FALLING;
+		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		val = PCH_EDGE_BOTH;
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		val = PCH_LEVEL_H;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		val = PCH_LEVEL_L;
+		break;
+	default:
+		return 0;
+	}
+
+	spin_lock_irqsave(&chip->spinlock, flags);
+
+	/* Set interrupt mode */
+	im = ioread32(im_reg) & ~(PCH_IM_MASK << (im_pos * 4));
+	iowrite32(im | (val << (im_pos * 4)), im_reg);
+
+	/* And the handler */
+	if (type & IRQ_TYPE_LEVEL_MASK)
+		irq_set_handler_locked(d, handle_level_irq);
+	else if (type & IRQ_TYPE_EDGE_BOTH)
+		irq_set_handler_locked(d, handle_edge_irq);
+
+	spin_unlock_irqrestore(&chip->spinlock, flags);
+	return 0;
+}
+
+static void pch_irq_unmask(struct irq_data *d)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	struct pch_gpio *chip = gc->private;
+
+	iowrite32(BIT(d->irq - chip->irq_base), &chip->reg->imaskclr);
+}
+
+static void pch_irq_mask(struct irq_data *d)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	struct pch_gpio *chip = gc->private;
+
+	iowrite32(BIT(d->irq - chip->irq_base), &chip->reg->imask);
+}
+
+static void pch_irq_ack(struct irq_data *d)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	struct pch_gpio *chip = gc->private;
+
+	iowrite32(BIT(d->irq - chip->irq_base), &chip->reg->iclr);
+}
+
+static irqreturn_t pch_gpio_handler(int irq, void *dev_id)
+{
+	struct pch_gpio *chip = dev_id;
+	unsigned long reg_val = ioread32(&chip->reg->istatus);
+	int i;
+
+	dev_vdbg(chip->dev, "irq=%d  status=0x%lx\n", irq, reg_val);
+
+	reg_val &= BIT(gpio_pins[chip->ioh]) - 1;
+
+	for_each_set_bit(i, &reg_val, gpio_pins[chip->ioh])
+		generic_handle_irq(chip->irq_base + i);
+
+	return IRQ_RETVAL(reg_val);
+}
+
+static int pch_gpio_alloc_generic_chip(struct pch_gpio *chip,
+				       unsigned int irq_start,
+				       unsigned int num)
+{
+	struct irq_chip_generic *gc;
+	struct irq_chip_type *ct;
+	int rv;
+
+	gc = devm_irq_alloc_generic_chip(chip->dev, "pch_gpio", 1, irq_start,
+					 chip->base, handle_simple_irq);
+	if (!gc)
+		return -ENOMEM;
+
+	gc->private = chip;
+	ct = gc->chip_types;
+
+	ct->chip.irq_ack = pch_irq_ack;
+	ct->chip.irq_mask = pch_irq_mask;
+	ct->chip.irq_unmask = pch_irq_unmask;
+	ct->chip.irq_set_type = pch_irq_type;
+
+	rv = devm_irq_setup_generic_chip(chip->dev, gc, IRQ_MSK(num),
+					 IRQ_GC_INIT_MASK_CACHE,
+					 IRQ_NOREQUEST | IRQ_NOPROBE, 0);
+
+	return rv;
+}
+
+static int pch_gpio_probe(struct pci_dev *pdev,
+				    const struct pci_device_id *id)
+{
+	s32 ret;
+	struct pch_gpio *chip;
+	int irq_base;
+
+	chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
+	if (chip == NULL)
+		return -ENOMEM;
+
+	chip->dev = &pdev->dev;
+	ret = pcim_enable_device(pdev);
+	if (ret) {
+		dev_err(&pdev->dev, "pci_enable_device FAILED");
+		return ret;
+	}
+
+	ret = pcim_iomap_regions(pdev, BIT(1), KBUILD_MODNAME);
+	if (ret) {
+		dev_err(&pdev->dev, "pci_request_regions FAILED-%d", ret);
+		return ret;
+	}
+
+	chip->base = pcim_iomap_table(pdev)[1];
+
+	if (pdev->device == 0x8803)
+		chip->ioh = INTEL_EG20T_PCH;
+	else if (pdev->device == 0x8014)
+		chip->ioh = OKISEMI_ML7223m_IOH;
+	else if (pdev->device == 0x8043)
+		chip->ioh = OKISEMI_ML7223n_IOH;
+
+	chip->reg = chip->base;
+	pci_set_drvdata(pdev, chip);
+	spin_lock_init(&chip->spinlock);
+	pch_gpio_setup(chip);
+
+	ret = devm_gpiochip_add_data(&pdev->dev, &chip->gpio, chip);
+	if (ret) {
+		dev_err(&pdev->dev, "PCH gpio: Failed to register GPIO\n");
+		return ret;
+	}
+
+	irq_base = devm_irq_alloc_descs(&pdev->dev, -1, 0,
+					gpio_pins[chip->ioh], NUMA_NO_NODE);
+	if (irq_base < 0) {
+		dev_warn(&pdev->dev, "PCH gpio: Failed to get IRQ base num\n");
+		chip->irq_base = -1;
+		return 0;
+	}
+	chip->irq_base = irq_base;
+
+	/* Mask all interrupts, but enable them */
+	iowrite32(BIT(gpio_pins[chip->ioh]) - 1, &chip->reg->imask);
+	iowrite32(BIT(gpio_pins[chip->ioh]) - 1, &chip->reg->ien);
+
+	ret = devm_request_irq(&pdev->dev, pdev->irq, pch_gpio_handler,
+			       IRQF_SHARED, KBUILD_MODNAME, chip);
+	if (ret) {
+		dev_err(&pdev->dev, "request_irq failed\n");
+		return ret;
+	}
+
+	return pch_gpio_alloc_generic_chip(chip, irq_base, gpio_pins[chip->ioh]);
+}
+
+static int __maybe_unused pch_gpio_suspend(struct device *dev)
+{
+	struct pch_gpio *chip = dev_get_drvdata(dev);
+	unsigned long flags;
+
+	spin_lock_irqsave(&chip->spinlock, flags);
+	pch_gpio_save_reg_conf(chip);
+	spin_unlock_irqrestore(&chip->spinlock, flags);
+
+	return 0;
+}
+
+static int __maybe_unused pch_gpio_resume(struct device *dev)
+{
+	struct pch_gpio *chip = dev_get_drvdata(dev);
+	unsigned long flags;
+
+	spin_lock_irqsave(&chip->spinlock, flags);
+	iowrite32(0x01, &chip->reg->reset);
+	iowrite32(0x00, &chip->reg->reset);
+	pch_gpio_restore_reg_conf(chip);
+	spin_unlock_irqrestore(&chip->spinlock, flags);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(pch_gpio_pm_ops, pch_gpio_suspend, pch_gpio_resume);
+
+static const struct pci_device_id pch_gpio_pcidev_id[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8803) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8014) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8043) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8803) },
+	{ 0, }
+};
+MODULE_DEVICE_TABLE(pci, pch_gpio_pcidev_id);
+
+static struct pci_driver pch_gpio_driver = {
+	.name = "pch_gpio",
+	.id_table = pch_gpio_pcidev_id,
+	.probe = pch_gpio_probe,
+	.driver = {
+		.pm = &pch_gpio_pm_ops,
+	},
+};
+
+module_pci_driver(pch_gpio_driver);
+
+MODULE_DESCRIPTION("PCH GPIO PCI Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-pci-idio-16.c b/drivers/gpio/gpio-pci-idio-16.c
new file mode 100644
index 000000000..9acec76e0
--- /dev/null
+++ b/drivers/gpio/gpio-pci-idio-16.c
@@ -0,0 +1,381 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * GPIO driver for the ACCES PCI-IDIO-16
+ * Copyright (C) 2017 William Breathitt Gray
+ */
+#include <linux/bitmap.h>
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/gpio/driver.h>
+#include <linux/interrupt.h>
+#include <linux/irqdesc.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+/**
+ * struct idio_16_gpio_reg - GPIO device registers structure
+ * @out0_7:	Read: FET Drive Outputs 0-7
+ *		Write: FET Drive Outputs 0-7
+ * @in0_7:	Read: Isolated Inputs 0-7
+ *		Write: Clear Interrupt
+ * @irq_ctl:	Read: Enable IRQ
+ *		Write: Disable IRQ
+ * @filter_ctl:	Read: Activate Input Filters 0-15
+ *		Write: Deactivate Input Filters 0-15
+ * @out8_15:	Read: FET Drive Outputs 8-15
+ *		Write: FET Drive Outputs 8-15
+ * @in8_15:	Read: Isolated Inputs 8-15
+ *		Write: Unused
+ * @irq_status:	Read: Interrupt status
+ *		Write: Unused
+ */
+struct idio_16_gpio_reg {
+	u8 out0_7;
+	u8 in0_7;
+	u8 irq_ctl;
+	u8 filter_ctl;
+	u8 out8_15;
+	u8 in8_15;
+	u8 irq_status;
+};
+
+/**
+ * struct idio_16_gpio - GPIO device private data structure
+ * @chip:	instance of the gpio_chip
+ * @lock:	synchronization lock to prevent I/O race conditions
+ * @reg:	I/O address offset for the GPIO device registers
+ * @irq_mask:	I/O bits affected by interrupts
+ */
+struct idio_16_gpio {
+	struct gpio_chip chip;
+	raw_spinlock_t lock;
+	struct idio_16_gpio_reg __iomem *reg;
+	unsigned long irq_mask;
+};
+
+static int idio_16_gpio_get_direction(struct gpio_chip *chip,
+	unsigned int offset)
+{
+	if (offset > 15)
+		return GPIO_LINE_DIRECTION_IN;
+
+	return GPIO_LINE_DIRECTION_OUT;
+}
+
+static int idio_16_gpio_direction_input(struct gpio_chip *chip,
+	unsigned int offset)
+{
+	return 0;
+}
+
+static int idio_16_gpio_direction_output(struct gpio_chip *chip,
+	unsigned int offset, int value)
+{
+	chip->set(chip, offset, value);
+	return 0;
+}
+
+static int idio_16_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+	struct idio_16_gpio *const idio16gpio = gpiochip_get_data(chip);
+	unsigned long mask = BIT(offset);
+
+	if (offset < 8)
+		return !!(ioread8(&idio16gpio->reg->out0_7) & mask);
+
+	if (offset < 16)
+		return !!(ioread8(&idio16gpio->reg->out8_15) & (mask >> 8));
+
+	if (offset < 24)
+		return !!(ioread8(&idio16gpio->reg->in0_7) & (mask >> 16));
+
+	return !!(ioread8(&idio16gpio->reg->in8_15) & (mask >> 24));
+}
+
+static int idio_16_gpio_get_multiple(struct gpio_chip *chip,
+	unsigned long *mask, unsigned long *bits)
+{
+	struct idio_16_gpio *const idio16gpio = gpiochip_get_data(chip);
+	unsigned long offset;
+	unsigned long gpio_mask;
+	void __iomem *ports[] = {
+		&idio16gpio->reg->out0_7, &idio16gpio->reg->out8_15,
+		&idio16gpio->reg->in0_7, &idio16gpio->reg->in8_15,
+	};
+	void __iomem *port_addr;
+	unsigned long port_state;
+
+	/* clear bits array to a clean slate */
+	bitmap_zero(bits, chip->ngpio);
+
+	for_each_set_clump8(offset, gpio_mask, mask, ARRAY_SIZE(ports) * 8) {
+		port_addr = ports[offset / 8];
+		port_state = ioread8(port_addr) & gpio_mask;
+
+		bitmap_set_value8(bits, port_state, offset);
+	}
+
+	return 0;
+}
+
+static void idio_16_gpio_set(struct gpio_chip *chip, unsigned int offset,
+	int value)
+{
+	struct idio_16_gpio *const idio16gpio = gpiochip_get_data(chip);
+	unsigned int mask = BIT(offset);
+	void __iomem *base;
+	unsigned long flags;
+	unsigned int out_state;
+
+	if (offset > 15)
+		return;
+
+	if (offset > 7) {
+		mask >>= 8;
+		base = &idio16gpio->reg->out8_15;
+	} else
+		base = &idio16gpio->reg->out0_7;
+
+	raw_spin_lock_irqsave(&idio16gpio->lock, flags);
+
+	if (value)
+		out_state = ioread8(base) | mask;
+	else
+		out_state = ioread8(base) & ~mask;
+
+	iowrite8(out_state, base);
+
+	raw_spin_unlock_irqrestore(&idio16gpio->lock, flags);
+}
+
+static void idio_16_gpio_set_multiple(struct gpio_chip *chip,
+	unsigned long *mask, unsigned long *bits)
+{
+	struct idio_16_gpio *const idio16gpio = gpiochip_get_data(chip);
+	unsigned long offset;
+	unsigned long gpio_mask;
+	void __iomem *ports[] = {
+		&idio16gpio->reg->out0_7, &idio16gpio->reg->out8_15,
+	};
+	size_t index;
+	void __iomem *port_addr;
+	unsigned long bitmask;
+	unsigned long flags;
+	unsigned long out_state;
+
+	for_each_set_clump8(offset, gpio_mask, mask, ARRAY_SIZE(ports) * 8) {
+		index = offset / 8;
+		port_addr = ports[index];
+
+		bitmask = bitmap_get_value8(bits, offset) & gpio_mask;
+
+		raw_spin_lock_irqsave(&idio16gpio->lock, flags);
+
+		out_state = ioread8(port_addr) & ~gpio_mask;
+		out_state |= bitmask;
+		iowrite8(out_state, port_addr);
+
+		raw_spin_unlock_irqrestore(&idio16gpio->lock, flags);
+	}
+}
+
+static void idio_16_irq_ack(struct irq_data *data)
+{
+}
+
+static void idio_16_irq_mask(struct irq_data *data)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+	struct idio_16_gpio *const idio16gpio = gpiochip_get_data(chip);
+	const unsigned long mask = BIT(irqd_to_hwirq(data));
+	unsigned long flags;
+
+	idio16gpio->irq_mask &= ~mask;
+
+	if (!idio16gpio->irq_mask) {
+		raw_spin_lock_irqsave(&idio16gpio->lock, flags);
+
+		iowrite8(0, &idio16gpio->reg->irq_ctl);
+
+		raw_spin_unlock_irqrestore(&idio16gpio->lock, flags);
+	}
+}
+
+static void idio_16_irq_unmask(struct irq_data *data)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+	struct idio_16_gpio *const idio16gpio = gpiochip_get_data(chip);
+	const unsigned long mask = BIT(irqd_to_hwirq(data));
+	const unsigned long prev_irq_mask = idio16gpio->irq_mask;
+	unsigned long flags;
+
+	idio16gpio->irq_mask |= mask;
+
+	if (!prev_irq_mask) {
+		raw_spin_lock_irqsave(&idio16gpio->lock, flags);
+
+		ioread8(&idio16gpio->reg->irq_ctl);
+
+		raw_spin_unlock_irqrestore(&idio16gpio->lock, flags);
+	}
+}
+
+static int idio_16_irq_set_type(struct irq_data *data, unsigned int flow_type)
+{
+	/* The only valid irq types are none and both-edges */
+	if (flow_type != IRQ_TYPE_NONE &&
+		(flow_type & IRQ_TYPE_EDGE_BOTH) != IRQ_TYPE_EDGE_BOTH)
+		return -EINVAL;
+
+	return 0;
+}
+
+static struct irq_chip idio_16_irqchip = {
+	.name = "pci-idio-16",
+	.irq_ack = idio_16_irq_ack,
+	.irq_mask = idio_16_irq_mask,
+	.irq_unmask = idio_16_irq_unmask,
+	.irq_set_type = idio_16_irq_set_type
+};
+
+static irqreturn_t idio_16_irq_handler(int irq, void *dev_id)
+{
+	struct idio_16_gpio *const idio16gpio = dev_id;
+	unsigned int irq_status;
+	struct gpio_chip *const chip = &idio16gpio->chip;
+	int gpio;
+
+	raw_spin_lock(&idio16gpio->lock);
+
+	irq_status = ioread8(&idio16gpio->reg->irq_status);
+
+	raw_spin_unlock(&idio16gpio->lock);
+
+	/* Make sure our device generated IRQ */
+	if (!(irq_status & 0x3) || !(irq_status & 0x4))
+		return IRQ_NONE;
+
+	for_each_set_bit(gpio, &idio16gpio->irq_mask, chip->ngpio)
+		generic_handle_irq(irq_find_mapping(chip->irq.domain, gpio));
+
+	raw_spin_lock(&idio16gpio->lock);
+
+	/* Clear interrupt */
+	iowrite8(0, &idio16gpio->reg->in0_7);
+
+	raw_spin_unlock(&idio16gpio->lock);
+
+	return IRQ_HANDLED;
+}
+
+#define IDIO_16_NGPIO 32
+static const char *idio_16_names[IDIO_16_NGPIO] = {
+	"OUT0", "OUT1", "OUT2", "OUT3", "OUT4", "OUT5", "OUT6", "OUT7",
+	"OUT8", "OUT9", "OUT10", "OUT11", "OUT12", "OUT13", "OUT14", "OUT15",
+	"IIN0", "IIN1", "IIN2", "IIN3", "IIN4", "IIN5", "IIN6", "IIN7",
+	"IIN8", "IIN9", "IIN10", "IIN11", "IIN12", "IIN13", "IIN14", "IIN15"
+};
+
+static int idio_16_irq_init_hw(struct gpio_chip *gc)
+{
+	struct idio_16_gpio *const idio16gpio = gpiochip_get_data(gc);
+
+	/* Disable IRQ by default and clear any pending interrupt */
+	iowrite8(0, &idio16gpio->reg->irq_ctl);
+	iowrite8(0, &idio16gpio->reg->in0_7);
+
+	return 0;
+}
+
+static int idio_16_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	struct device *const dev = &pdev->dev;
+	struct idio_16_gpio *idio16gpio;
+	int err;
+	const size_t pci_bar_index = 2;
+	const char *const name = pci_name(pdev);
+	struct gpio_irq_chip *girq;
+
+	idio16gpio = devm_kzalloc(dev, sizeof(*idio16gpio), GFP_KERNEL);
+	if (!idio16gpio)
+		return -ENOMEM;
+
+	err = pcim_enable_device(pdev);
+	if (err) {
+		dev_err(dev, "Failed to enable PCI device (%d)\n", err);
+		return err;
+	}
+
+	err = pcim_iomap_regions(pdev, BIT(pci_bar_index), name);
+	if (err) {
+		dev_err(dev, "Unable to map PCI I/O addresses (%d)\n", err);
+		return err;
+	}
+
+	idio16gpio->reg = pcim_iomap_table(pdev)[pci_bar_index];
+
+	/* Deactivate input filters */
+	iowrite8(0, &idio16gpio->reg->filter_ctl);
+
+	idio16gpio->chip.label = name;
+	idio16gpio->chip.parent = dev;
+	idio16gpio->chip.owner = THIS_MODULE;
+	idio16gpio->chip.base = -1;
+	idio16gpio->chip.ngpio = IDIO_16_NGPIO;
+	idio16gpio->chip.names = idio_16_names;
+	idio16gpio->chip.get_direction = idio_16_gpio_get_direction;
+	idio16gpio->chip.direction_input = idio_16_gpio_direction_input;
+	idio16gpio->chip.direction_output = idio_16_gpio_direction_output;
+	idio16gpio->chip.get = idio_16_gpio_get;
+	idio16gpio->chip.get_multiple = idio_16_gpio_get_multiple;
+	idio16gpio->chip.set = idio_16_gpio_set;
+	idio16gpio->chip.set_multiple = idio_16_gpio_set_multiple;
+
+	girq = &idio16gpio->chip.irq;
+	girq->chip = &idio_16_irqchip;
+	/* This will let us handle the parent IRQ in the driver */
+	girq->parent_handler = NULL;
+	girq->num_parents = 0;
+	girq->parents = NULL;
+	girq->default_type = IRQ_TYPE_NONE;
+	girq->handler = handle_edge_irq;
+	girq->init_hw = idio_16_irq_init_hw;
+
+	raw_spin_lock_init(&idio16gpio->lock);
+
+	err = devm_gpiochip_add_data(dev, &idio16gpio->chip, idio16gpio);
+	if (err) {
+		dev_err(dev, "GPIO registering failed (%d)\n", err);
+		return err;
+	}
+
+	err = devm_request_irq(dev, pdev->irq, idio_16_irq_handler, IRQF_SHARED,
+		name, idio16gpio);
+	if (err) {
+		dev_err(dev, "IRQ handler registering failed (%d)\n", err);
+		return err;
+	}
+
+	return 0;
+}
+
+static const struct pci_device_id idio_16_pci_dev_id[] = {
+	{ PCI_DEVICE(0x494F, 0x0DC8) }, { 0 }
+};
+MODULE_DEVICE_TABLE(pci, idio_16_pci_dev_id);
+
+static struct pci_driver idio_16_driver = {
+	.name = "pci-idio-16",
+	.id_table = idio_16_pci_dev_id,
+	.probe = idio_16_probe
+};
+
+module_pci_driver(idio_16_driver);
+
+MODULE_AUTHOR("William Breathitt Gray <vilhelm.gray@gmail.com>");
+MODULE_DESCRIPTION("ACCES PCI-IDIO-16 GPIO driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-pcie-idio-24.c b/drivers/gpio/gpio-pcie-idio-24.c
new file mode 100644
index 000000000..2a07fd967
--- /dev/null
+++ b/drivers/gpio/gpio-pcie-idio-24.c
@@ -0,0 +1,591 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * GPIO driver for the ACCES PCIe-IDIO-24 family
+ * Copyright (C) 2018 William Breathitt Gray
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * This driver supports the following ACCES devices: PCIe-IDIO-24,
+ * PCIe-IDI-24, PCIe-IDO-24, and PCIe-IDIO-12.
+ */
+#include <linux/bitmap.h>
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/gpio/driver.h>
+#include <linux/interrupt.h>
+#include <linux/irqdesc.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+/*
+ * PLX PEX8311 PCI LCS_INTCSR Interrupt Control/Status
+ *
+ * Bit: Description
+ *   0: Enable Interrupt Sources (Bit 0)
+ *   1: Enable Interrupt Sources (Bit 1)
+ *   2: Generate Internal PCI Bus Internal SERR# Interrupt
+ *   3: Mailbox Interrupt Enable
+ *   4: Power Management Interrupt Enable
+ *   5: Power Management Interrupt
+ *   6: Slave Read Local Data Parity Check Error Enable
+ *   7: Slave Read Local Data Parity Check Error Status
+ *   8: Internal PCI Wire Interrupt Enable
+ *   9: PCI Express Doorbell Interrupt Enable
+ *  10: PCI Abort Interrupt Enable
+ *  11: Local Interrupt Input Enable
+ *  12: Retry Abort Enable
+ *  13: PCI Express Doorbell Interrupt Active
+ *  14: PCI Abort Interrupt Active
+ *  15: Local Interrupt Input Active
+ *  16: Local Interrupt Output Enable
+ *  17: Local Doorbell Interrupt Enable
+ *  18: DMA Channel 0 Interrupt Enable
+ *  19: DMA Channel 1 Interrupt Enable
+ *  20: Local Doorbell Interrupt Active
+ *  21: DMA Channel 0 Interrupt Active
+ *  22: DMA Channel 1 Interrupt Active
+ *  23: Built-In Self-Test (BIST) Interrupt Active
+ *  24: Direct Master was the Bus Master during a Master or Target Abort
+ *  25: DMA Channel 0 was the Bus Master during a Master or Target Abort
+ *  26: DMA Channel 1 was the Bus Master during a Master or Target Abort
+ *  27: Target Abort after internal 256 consecutive Master Retrys
+ *  28: PCI Bus wrote data to LCS_MBOX0
+ *  29: PCI Bus wrote data to LCS_MBOX1
+ *  30: PCI Bus wrote data to LCS_MBOX2
+ *  31: PCI Bus wrote data to LCS_MBOX3
+ */
+#define PLX_PEX8311_PCI_LCS_INTCSR  0x68
+#define INTCSR_INTERNAL_PCI_WIRE    BIT(8)
+#define INTCSR_LOCAL_INPUT          BIT(11)
+
+/**
+ * struct idio_24_gpio_reg - GPIO device registers structure
+ * @out0_7:	Read: FET Outputs 0-7
+ *		Write: FET Outputs 0-7
+ * @out8_15:	Read: FET Outputs 8-15
+ *		Write: FET Outputs 8-15
+ * @out16_23:	Read: FET Outputs 16-23
+ *		Write: FET Outputs 16-23
+ * @ttl_out0_7:	Read: TTL/CMOS Outputs 0-7
+ *		Write: TTL/CMOS Outputs 0-7
+ * @in0_7:	Read: Isolated Inputs 0-7
+ *		Write: Reserved
+ * @in8_15:	Read: Isolated Inputs 8-15
+ *		Write: Reserved
+ * @in16_23:	Read: Isolated Inputs 16-23
+ *		Write: Reserved
+ * @ttl_in0_7:	Read: TTL/CMOS Inputs 0-7
+ *		Write: Reserved
+ * @cos0_7:	Read: COS Status Inputs 0-7
+ *		Write: COS Clear Inputs 0-7
+ * @cos8_15:	Read: COS Status Inputs 8-15
+ *		Write: COS Clear Inputs 8-15
+ * @cos16_23:	Read: COS Status Inputs 16-23
+ *		Write: COS Clear Inputs 16-23
+ * @cos_ttl0_7:	Read: COS Status TTL/CMOS 0-7
+ *		Write: COS Clear TTL/CMOS 0-7
+ * @ctl:	Read: Control Register
+ *		Write: Control Register
+ * @reserved:	Read: Reserved
+ *		Write: Reserved
+ * @cos_enable:	Read: COS Enable
+ *		Write: COS Enable
+ * @soft_reset:	Read: IRQ Output Pin Status
+ *		Write: Software Board Reset
+ */
+struct idio_24_gpio_reg {
+	u8 out0_7;
+	u8 out8_15;
+	u8 out16_23;
+	u8 ttl_out0_7;
+	u8 in0_7;
+	u8 in8_15;
+	u8 in16_23;
+	u8 ttl_in0_7;
+	u8 cos0_7;
+	u8 cos8_15;
+	u8 cos16_23;
+	u8 cos_ttl0_7;
+	u8 ctl;
+	u8 reserved;
+	u8 cos_enable;
+	u8 soft_reset;
+};
+
+/**
+ * struct idio_24_gpio - GPIO device private data structure
+ * @chip:	instance of the gpio_chip
+ * @lock:	synchronization lock to prevent I/O race conditions
+ * @reg:	I/O address offset for the GPIO device registers
+ * @irq_mask:	I/O bits affected by interrupts
+ */
+struct idio_24_gpio {
+	struct gpio_chip chip;
+	raw_spinlock_t lock;
+	__u8 __iomem *plx;
+	struct idio_24_gpio_reg __iomem *reg;
+	unsigned long irq_mask;
+};
+
+static int idio_24_gpio_get_direction(struct gpio_chip *chip,
+	unsigned int offset)
+{
+	struct idio_24_gpio *const idio24gpio = gpiochip_get_data(chip);
+	const unsigned long out_mode_mask = BIT(1);
+
+	/* FET Outputs */
+	if (offset < 24)
+		return GPIO_LINE_DIRECTION_OUT;
+
+	/* Isolated Inputs */
+	if (offset < 48)
+		return GPIO_LINE_DIRECTION_IN;
+
+	/* TTL/CMOS I/O */
+	/* OUT MODE = 1 when TTL/CMOS Output Mode is set */
+	if (ioread8(&idio24gpio->reg->ctl) & out_mode_mask)
+		return GPIO_LINE_DIRECTION_OUT;
+
+	return GPIO_LINE_DIRECTION_IN;
+}
+
+static int idio_24_gpio_direction_input(struct gpio_chip *chip,
+	unsigned int offset)
+{
+	struct idio_24_gpio *const idio24gpio = gpiochip_get_data(chip);
+	unsigned long flags;
+	unsigned int ctl_state;
+	const unsigned long out_mode_mask = BIT(1);
+
+	/* TTL/CMOS I/O */
+	if (offset > 47) {
+		raw_spin_lock_irqsave(&idio24gpio->lock, flags);
+
+		/* Clear TTL/CMOS Output Mode */
+		ctl_state = ioread8(&idio24gpio->reg->ctl) & ~out_mode_mask;
+		iowrite8(ctl_state, &idio24gpio->reg->ctl);
+
+		raw_spin_unlock_irqrestore(&idio24gpio->lock, flags);
+	}
+
+	return 0;
+}
+
+static int idio_24_gpio_direction_output(struct gpio_chip *chip,
+	unsigned int offset, int value)
+{
+	struct idio_24_gpio *const idio24gpio = gpiochip_get_data(chip);
+	unsigned long flags;
+	unsigned int ctl_state;
+	const unsigned long out_mode_mask = BIT(1);
+
+	/* TTL/CMOS I/O */
+	if (offset > 47) {
+		raw_spin_lock_irqsave(&idio24gpio->lock, flags);
+
+		/* Set TTL/CMOS Output Mode */
+		ctl_state = ioread8(&idio24gpio->reg->ctl) | out_mode_mask;
+		iowrite8(ctl_state, &idio24gpio->reg->ctl);
+
+		raw_spin_unlock_irqrestore(&idio24gpio->lock, flags);
+	}
+
+	chip->set(chip, offset, value);
+	return 0;
+}
+
+static int idio_24_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+	struct idio_24_gpio *const idio24gpio = gpiochip_get_data(chip);
+	const unsigned long offset_mask = BIT(offset % 8);
+	const unsigned long out_mode_mask = BIT(1);
+
+	/* FET Outputs */
+	if (offset < 8)
+		return !!(ioread8(&idio24gpio->reg->out0_7) & offset_mask);
+
+	if (offset < 16)
+		return !!(ioread8(&idio24gpio->reg->out8_15) & offset_mask);
+
+	if (offset < 24)
+		return !!(ioread8(&idio24gpio->reg->out16_23) & offset_mask);
+
+	/* Isolated Inputs */
+	if (offset < 32)
+		return !!(ioread8(&idio24gpio->reg->in0_7) & offset_mask);
+
+	if (offset < 40)
+		return !!(ioread8(&idio24gpio->reg->in8_15) & offset_mask);
+
+	if (offset < 48)
+		return !!(ioread8(&idio24gpio->reg->in16_23) & offset_mask);
+
+	/* TTL/CMOS Outputs */
+	if (ioread8(&idio24gpio->reg->ctl) & out_mode_mask)
+		return !!(ioread8(&idio24gpio->reg->ttl_out0_7) & offset_mask);
+
+	/* TTL/CMOS Inputs */
+	return !!(ioread8(&idio24gpio->reg->ttl_in0_7) & offset_mask);
+}
+
+static int idio_24_gpio_get_multiple(struct gpio_chip *chip,
+	unsigned long *mask, unsigned long *bits)
+{
+	struct idio_24_gpio *const idio24gpio = gpiochip_get_data(chip);
+	unsigned long offset;
+	unsigned long gpio_mask;
+	void __iomem *ports[] = {
+		&idio24gpio->reg->out0_7, &idio24gpio->reg->out8_15,
+		&idio24gpio->reg->out16_23, &idio24gpio->reg->in0_7,
+		&idio24gpio->reg->in8_15, &idio24gpio->reg->in16_23,
+	};
+	size_t index;
+	unsigned long port_state;
+	const unsigned long out_mode_mask = BIT(1);
+
+	/* clear bits array to a clean slate */
+	bitmap_zero(bits, chip->ngpio);
+
+	for_each_set_clump8(offset, gpio_mask, mask, ARRAY_SIZE(ports) * 8) {
+		index = offset / 8;
+
+		/* read bits from current gpio port (port 6 is TTL GPIO) */
+		if (index < 6)
+			port_state = ioread8(ports[index]);
+		else if (ioread8(&idio24gpio->reg->ctl) & out_mode_mask)
+			port_state = ioread8(&idio24gpio->reg->ttl_out0_7);
+		else
+			port_state = ioread8(&idio24gpio->reg->ttl_in0_7);
+
+		port_state &= gpio_mask;
+
+		bitmap_set_value8(bits, port_state, offset);
+	}
+
+	return 0;
+}
+
+static void idio_24_gpio_set(struct gpio_chip *chip, unsigned int offset,
+	int value)
+{
+	struct idio_24_gpio *const idio24gpio = gpiochip_get_data(chip);
+	const unsigned long out_mode_mask = BIT(1);
+	void __iomem *base;
+	const unsigned int mask = BIT(offset % 8);
+	unsigned long flags;
+	unsigned int out_state;
+
+	/* Isolated Inputs */
+	if (offset > 23 && offset < 48)
+		return;
+
+	/* TTL/CMOS Inputs */
+	if (offset > 47 && !(ioread8(&idio24gpio->reg->ctl) & out_mode_mask))
+		return;
+
+	/* TTL/CMOS Outputs */
+	if (offset > 47)
+		base = &idio24gpio->reg->ttl_out0_7;
+	/* FET Outputs */
+	else if (offset > 15)
+		base = &idio24gpio->reg->out16_23;
+	else if (offset > 7)
+		base = &idio24gpio->reg->out8_15;
+	else
+		base = &idio24gpio->reg->out0_7;
+
+	raw_spin_lock_irqsave(&idio24gpio->lock, flags);
+
+	if (value)
+		out_state = ioread8(base) | mask;
+	else
+		out_state = ioread8(base) & ~mask;
+
+	iowrite8(out_state, base);
+
+	raw_spin_unlock_irqrestore(&idio24gpio->lock, flags);
+}
+
+static void idio_24_gpio_set_multiple(struct gpio_chip *chip,
+	unsigned long *mask, unsigned long *bits)
+{
+	struct idio_24_gpio *const idio24gpio = gpiochip_get_data(chip);
+	unsigned long offset;
+	unsigned long gpio_mask;
+	void __iomem *ports[] = {
+		&idio24gpio->reg->out0_7, &idio24gpio->reg->out8_15,
+		&idio24gpio->reg->out16_23
+	};
+	size_t index;
+	unsigned long bitmask;
+	unsigned long flags;
+	unsigned long out_state;
+	const unsigned long out_mode_mask = BIT(1);
+
+	for_each_set_clump8(offset, gpio_mask, mask, ARRAY_SIZE(ports) * 8) {
+		index = offset / 8;
+
+		bitmask = bitmap_get_value8(bits, offset) & gpio_mask;
+
+		raw_spin_lock_irqsave(&idio24gpio->lock, flags);
+
+		/* read bits from current gpio port (port 6 is TTL GPIO) */
+		if (index < 6) {
+			out_state = ioread8(ports[index]);
+		} else if (ioread8(&idio24gpio->reg->ctl) & out_mode_mask) {
+			out_state = ioread8(&idio24gpio->reg->ttl_out0_7);
+		} else {
+			/* skip TTL GPIO if set for input */
+			raw_spin_unlock_irqrestore(&idio24gpio->lock, flags);
+			continue;
+		}
+
+		/* set requested bit states */
+		out_state &= ~gpio_mask;
+		out_state |= bitmask;
+
+		/* write bits for current gpio port (port 6 is TTL GPIO) */
+		if (index < 6)
+			iowrite8(out_state, ports[index]);
+		else
+			iowrite8(out_state, &idio24gpio->reg->ttl_out0_7);
+
+		raw_spin_unlock_irqrestore(&idio24gpio->lock, flags);
+	}
+}
+
+static void idio_24_irq_ack(struct irq_data *data)
+{
+}
+
+static void idio_24_irq_mask(struct irq_data *data)
+{
+	struct gpio_chip *const chip = irq_data_get_irq_chip_data(data);
+	struct idio_24_gpio *const idio24gpio = gpiochip_get_data(chip);
+	unsigned long flags;
+	const unsigned long bit_offset = irqd_to_hwirq(data) - 24;
+	unsigned char new_irq_mask;
+	const unsigned long bank_offset = bit_offset / 8;
+	unsigned char cos_enable_state;
+
+	raw_spin_lock_irqsave(&idio24gpio->lock, flags);
+
+	idio24gpio->irq_mask &= ~BIT(bit_offset);
+	new_irq_mask = idio24gpio->irq_mask >> bank_offset * 8;
+
+	if (!new_irq_mask) {
+		cos_enable_state = ioread8(&idio24gpio->reg->cos_enable);
+
+		/* Disable Rising Edge detection */
+		cos_enable_state &= ~BIT(bank_offset);
+		/* Disable Falling Edge detection */
+		cos_enable_state &= ~BIT(bank_offset + 4);
+
+		iowrite8(cos_enable_state, &idio24gpio->reg->cos_enable);
+	}
+
+	raw_spin_unlock_irqrestore(&idio24gpio->lock, flags);
+}
+
+static void idio_24_irq_unmask(struct irq_data *data)
+{
+	struct gpio_chip *const chip = irq_data_get_irq_chip_data(data);
+	struct idio_24_gpio *const idio24gpio = gpiochip_get_data(chip);
+	unsigned long flags;
+	unsigned char prev_irq_mask;
+	const unsigned long bit_offset = irqd_to_hwirq(data) - 24;
+	const unsigned long bank_offset = bit_offset / 8;
+	unsigned char cos_enable_state;
+
+	raw_spin_lock_irqsave(&idio24gpio->lock, flags);
+
+	prev_irq_mask = idio24gpio->irq_mask >> bank_offset * 8;
+	idio24gpio->irq_mask |= BIT(bit_offset);
+
+	if (!prev_irq_mask) {
+		cos_enable_state = ioread8(&idio24gpio->reg->cos_enable);
+
+		/* Enable Rising Edge detection */
+		cos_enable_state |= BIT(bank_offset);
+		/* Enable Falling Edge detection */
+		cos_enable_state |= BIT(bank_offset + 4);
+
+		iowrite8(cos_enable_state, &idio24gpio->reg->cos_enable);
+	}
+
+	raw_spin_unlock_irqrestore(&idio24gpio->lock, flags);
+}
+
+static int idio_24_irq_set_type(struct irq_data *data, unsigned int flow_type)
+{
+	/* The only valid irq types are none and both-edges */
+	if (flow_type != IRQ_TYPE_NONE &&
+		(flow_type & IRQ_TYPE_EDGE_BOTH) != IRQ_TYPE_EDGE_BOTH)
+		return -EINVAL;
+
+	return 0;
+}
+
+static struct irq_chip idio_24_irqchip = {
+	.name = "pcie-idio-24",
+	.irq_ack = idio_24_irq_ack,
+	.irq_mask = idio_24_irq_mask,
+	.irq_unmask = idio_24_irq_unmask,
+	.irq_set_type = idio_24_irq_set_type
+};
+
+static irqreturn_t idio_24_irq_handler(int irq, void *dev_id)
+{
+	struct idio_24_gpio *const idio24gpio = dev_id;
+	unsigned long irq_status;
+	struct gpio_chip *const chip = &idio24gpio->chip;
+	unsigned long irq_mask;
+	int gpio;
+
+	raw_spin_lock(&idio24gpio->lock);
+
+	/* Read Change-Of-State status */
+	irq_status = ioread32(&idio24gpio->reg->cos0_7);
+
+	raw_spin_unlock(&idio24gpio->lock);
+
+	/* Make sure our device generated IRQ */
+	if (!irq_status)
+		return IRQ_NONE;
+
+	/* Handle only unmasked IRQ */
+	irq_mask = idio24gpio->irq_mask & irq_status;
+
+	for_each_set_bit(gpio, &irq_mask, chip->ngpio - 24)
+		generic_handle_irq(irq_find_mapping(chip->irq.domain,
+			gpio + 24));
+
+	raw_spin_lock(&idio24gpio->lock);
+
+	/* Clear Change-Of-State status */
+	iowrite32(irq_status, &idio24gpio->reg->cos0_7);
+
+	raw_spin_unlock(&idio24gpio->lock);
+
+	return IRQ_HANDLED;
+}
+
+#define IDIO_24_NGPIO 56
+static const char *idio_24_names[IDIO_24_NGPIO] = {
+	"OUT0", "OUT1", "OUT2", "OUT3", "OUT4", "OUT5", "OUT6", "OUT7",
+	"OUT8", "OUT9", "OUT10", "OUT11", "OUT12", "OUT13", "OUT14", "OUT15",
+	"OUT16", "OUT17", "OUT18", "OUT19", "OUT20", "OUT21", "OUT22", "OUT23",
+	"IIN0", "IIN1", "IIN2", "IIN3", "IIN4", "IIN5", "IIN6", "IIN7",
+	"IIN8", "IIN9", "IIN10", "IIN11", "IIN12", "IIN13", "IIN14", "IIN15",
+	"IIN16", "IIN17", "IIN18", "IIN19", "IIN20", "IIN21", "IIN22", "IIN23",
+	"TTL0", "TTL1", "TTL2", "TTL3", "TTL4", "TTL5", "TTL6", "TTL7"
+};
+
+static int idio_24_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	struct device *const dev = &pdev->dev;
+	struct idio_24_gpio *idio24gpio;
+	int err;
+	const size_t pci_plx_bar_index = 1;
+	const size_t pci_bar_index = 2;
+	const char *const name = pci_name(pdev);
+	struct gpio_irq_chip *girq;
+
+	idio24gpio = devm_kzalloc(dev, sizeof(*idio24gpio), GFP_KERNEL);
+	if (!idio24gpio)
+		return -ENOMEM;
+
+	err = pcim_enable_device(pdev);
+	if (err) {
+		dev_err(dev, "Failed to enable PCI device (%d)\n", err);
+		return err;
+	}
+
+	err = pcim_iomap_regions(pdev, BIT(pci_plx_bar_index) | BIT(pci_bar_index), name);
+	if (err) {
+		dev_err(dev, "Unable to map PCI I/O addresses (%d)\n", err);
+		return err;
+	}
+
+	idio24gpio->plx = pcim_iomap_table(pdev)[pci_plx_bar_index];
+	idio24gpio->reg = pcim_iomap_table(pdev)[pci_bar_index];
+
+	idio24gpio->chip.label = name;
+	idio24gpio->chip.parent = dev;
+	idio24gpio->chip.owner = THIS_MODULE;
+	idio24gpio->chip.base = -1;
+	idio24gpio->chip.ngpio = IDIO_24_NGPIO;
+	idio24gpio->chip.names = idio_24_names;
+	idio24gpio->chip.get_direction = idio_24_gpio_get_direction;
+	idio24gpio->chip.direction_input = idio_24_gpio_direction_input;
+	idio24gpio->chip.direction_output = idio_24_gpio_direction_output;
+	idio24gpio->chip.get = idio_24_gpio_get;
+	idio24gpio->chip.get_multiple = idio_24_gpio_get_multiple;
+	idio24gpio->chip.set = idio_24_gpio_set;
+	idio24gpio->chip.set_multiple = idio_24_gpio_set_multiple;
+
+	girq = &idio24gpio->chip.irq;
+	girq->chip = &idio_24_irqchip;
+	/* This will let us handle the parent IRQ in the driver */
+	girq->parent_handler = NULL;
+	girq->num_parents = 0;
+	girq->parents = NULL;
+	girq->default_type = IRQ_TYPE_NONE;
+	girq->handler = handle_edge_irq;
+
+	raw_spin_lock_init(&idio24gpio->lock);
+
+	/* Software board reset */
+	iowrite8(0, &idio24gpio->reg->soft_reset);
+	/*
+	 * enable PLX PEX8311 internal PCI wire interrupt and local interrupt
+	 * input
+	 */
+	iowrite8((INTCSR_INTERNAL_PCI_WIRE | INTCSR_LOCAL_INPUT) >> 8,
+		 idio24gpio->plx + PLX_PEX8311_PCI_LCS_INTCSR + 1);
+
+	err = devm_gpiochip_add_data(dev, &idio24gpio->chip, idio24gpio);
+	if (err) {
+		dev_err(dev, "GPIO registering failed (%d)\n", err);
+		return err;
+	}
+
+	err = devm_request_irq(dev, pdev->irq, idio_24_irq_handler, IRQF_SHARED,
+		name, idio24gpio);
+	if (err) {
+		dev_err(dev, "IRQ handler registering failed (%d)\n", err);
+		return err;
+	}
+
+	return 0;
+}
+
+static const struct pci_device_id idio_24_pci_dev_id[] = {
+	{ PCI_DEVICE(0x494F, 0x0FD0) }, { PCI_DEVICE(0x494F, 0x0BD0) },
+	{ PCI_DEVICE(0x494F, 0x07D0) }, { PCI_DEVICE(0x494F, 0x0FC0) },
+	{ 0 }
+};
+MODULE_DEVICE_TABLE(pci, idio_24_pci_dev_id);
+
+static struct pci_driver idio_24_driver = {
+	.name = "pcie-idio-24",
+	.id_table = idio_24_pci_dev_id,
+	.probe = idio_24_probe
+};
+
+module_pci_driver(idio_24_driver);
+
+MODULE_AUTHOR("William Breathitt Gray <vilhelm.gray@gmail.com>");
+MODULE_DESCRIPTION("ACCES PCIe-IDIO-24 GPIO driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-pisosr.c b/drivers/gpio/gpio-pisosr.c
new file mode 100644
index 000000000..8e04054cf
--- /dev/null
+++ b/drivers/gpio/gpio-pisosr.c
@@ -0,0 +1,202 @@
+/*
+ * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/
+ *	Andrew F. Davis <afd@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether expressed or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License version 2 for more details.
+ */
+
+#include <linux/bitmap.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/gpio/driver.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/spi/spi.h>
+
+#define DEFAULT_NGPIO 8
+
+/**
+ * struct pisosr_gpio - GPIO driver data
+ * @chip: GPIO controller chip
+ * @spi: SPI device pointer
+ * @buffer: Buffer for device reads
+ * @buffer_size: Size of buffer
+ * @load_gpio: GPIO pin used to load input into device
+ * @lock: Protects read sequences
+ */
+struct pisosr_gpio {
+	struct gpio_chip chip;
+	struct spi_device *spi;
+	u8 *buffer;
+	size_t buffer_size;
+	struct gpio_desc *load_gpio;
+	struct mutex lock;
+};
+
+static int pisosr_gpio_refresh(struct pisosr_gpio *gpio)
+{
+	int ret;
+
+	mutex_lock(&gpio->lock);
+
+	if (gpio->load_gpio) {
+		gpiod_set_value_cansleep(gpio->load_gpio, 1);
+		udelay(1); /* registers load time (~10ns) */
+		gpiod_set_value_cansleep(gpio->load_gpio, 0);
+		udelay(1); /* registers recovery time (~5ns) */
+	}
+
+	ret = spi_read(gpio->spi, gpio->buffer, gpio->buffer_size);
+
+	mutex_unlock(&gpio->lock);
+
+	return ret;
+}
+
+static int pisosr_gpio_get_direction(struct gpio_chip *chip,
+				     unsigned offset)
+{
+	/* This device always input */
+	return GPIO_LINE_DIRECTION_IN;
+}
+
+static int pisosr_gpio_direction_input(struct gpio_chip *chip,
+				       unsigned offset)
+{
+	/* This device always input */
+	return 0;
+}
+
+static int pisosr_gpio_direction_output(struct gpio_chip *chip,
+					unsigned offset, int value)
+{
+	/* This device is input only */
+	return -EINVAL;
+}
+
+static int pisosr_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct pisosr_gpio *gpio = gpiochip_get_data(chip);
+
+	/* Refresh may not always be needed */
+	pisosr_gpio_refresh(gpio);
+
+	return (gpio->buffer[offset / 8] >> (offset % 8)) & 0x1;
+}
+
+static int pisosr_gpio_get_multiple(struct gpio_chip *chip,
+				    unsigned long *mask, unsigned long *bits)
+{
+	struct pisosr_gpio *gpio = gpiochip_get_data(chip);
+	unsigned long offset;
+	unsigned long gpio_mask;
+	unsigned long buffer_state;
+
+	pisosr_gpio_refresh(gpio);
+
+	bitmap_zero(bits, chip->ngpio);
+	for_each_set_clump8(offset, gpio_mask, mask, chip->ngpio) {
+		buffer_state = gpio->buffer[offset / 8] & gpio_mask;
+		bitmap_set_value8(bits, buffer_state, offset);
+	}
+
+	return 0;
+}
+
+static const struct gpio_chip template_chip = {
+	.label			= "pisosr-gpio",
+	.owner			= THIS_MODULE,
+	.get_direction		= pisosr_gpio_get_direction,
+	.direction_input	= pisosr_gpio_direction_input,
+	.direction_output	= pisosr_gpio_direction_output,
+	.get			= pisosr_gpio_get,
+	.get_multiple		= pisosr_gpio_get_multiple,
+	.base			= -1,
+	.ngpio			= DEFAULT_NGPIO,
+	.can_sleep		= true,
+};
+
+static int pisosr_gpio_probe(struct spi_device *spi)
+{
+	struct device *dev = &spi->dev;
+	struct pisosr_gpio *gpio;
+	int ret;
+
+	gpio = devm_kzalloc(dev, sizeof(*gpio), GFP_KERNEL);
+	if (!gpio)
+		return -ENOMEM;
+
+	spi_set_drvdata(spi, gpio);
+
+	gpio->chip = template_chip;
+	gpio->chip.parent = dev;
+	of_property_read_u16(dev->of_node, "ngpios", &gpio->chip.ngpio);
+
+	gpio->spi = spi;
+
+	gpio->buffer_size = DIV_ROUND_UP(gpio->chip.ngpio, 8);
+	gpio->buffer = devm_kzalloc(dev, gpio->buffer_size, GFP_KERNEL);
+	if (!gpio->buffer)
+		return -ENOMEM;
+
+	gpio->load_gpio = devm_gpiod_get_optional(dev, "load", GPIOD_OUT_LOW);
+	if (IS_ERR(gpio->load_gpio))
+		return dev_err_probe(dev, PTR_ERR(gpio->load_gpio),
+				     "Unable to allocate load GPIO\n");
+
+	mutex_init(&gpio->lock);
+
+	ret = gpiochip_add_data(&gpio->chip, gpio);
+	if (ret < 0) {
+		dev_err(dev, "Unable to register gpiochip\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int pisosr_gpio_remove(struct spi_device *spi)
+{
+	struct pisosr_gpio *gpio = spi_get_drvdata(spi);
+
+	gpiochip_remove(&gpio->chip);
+
+	mutex_destroy(&gpio->lock);
+
+	return 0;
+}
+
+static const struct spi_device_id pisosr_gpio_id_table[] = {
+	{ "pisosr-gpio", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(spi, pisosr_gpio_id_table);
+
+static const struct of_device_id pisosr_gpio_of_match_table[] = {
+	{ .compatible = "pisosr-gpio", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, pisosr_gpio_of_match_table);
+
+static struct spi_driver pisosr_gpio_driver = {
+	.driver = {
+		.name = "pisosr-gpio",
+		.of_match_table = pisosr_gpio_of_match_table,
+	},
+	.probe = pisosr_gpio_probe,
+	.remove = pisosr_gpio_remove,
+	.id_table = pisosr_gpio_id_table,
+};
+module_spi_driver(pisosr_gpio_driver);
+
+MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>");
+MODULE_DESCRIPTION("SPI Compatible PISO Shift Register GPIO Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-pl061.c b/drivers/gpio/gpio-pl061.c
new file mode 100644
index 000000000..f1b53dd1d
--- /dev/null
+++ b/drivers/gpio/gpio-pl061.c
@@ -0,0 +1,426 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2008, 2009 Provigent Ltd.
+ *
+ * Author: Baruch Siach <baruch@tkos.co.il>
+ *
+ * Driver for the ARM PrimeCell(tm) General Purpose Input/Output (PL061)
+ *
+ * Data sheet: ARM DDI 0190B, September 2000
+ */
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/module.h>
+#include <linux/bitops.h>
+#include <linux/gpio/driver.h>
+#include <linux/device.h>
+#include <linux/amba/bus.h>
+#include <linux/slab.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/pm.h>
+
+#define GPIODIR 0x400
+#define GPIOIS  0x404
+#define GPIOIBE 0x408
+#define GPIOIEV 0x40C
+#define GPIOIE  0x410
+#define GPIORIS 0x414
+#define GPIOMIS 0x418
+#define GPIOIC  0x41C
+
+#define PL061_GPIO_NR	8
+
+#ifdef CONFIG_PM
+struct pl061_context_save_regs {
+	u8 gpio_data;
+	u8 gpio_dir;
+	u8 gpio_is;
+	u8 gpio_ibe;
+	u8 gpio_iev;
+	u8 gpio_ie;
+};
+#endif
+
+struct pl061 {
+	raw_spinlock_t		lock;
+
+	void __iomem		*base;
+	struct gpio_chip	gc;
+	struct irq_chip		irq_chip;
+	int			parent_irq;
+
+#ifdef CONFIG_PM
+	struct pl061_context_save_regs csave_regs;
+#endif
+};
+
+static int pl061_get_direction(struct gpio_chip *gc, unsigned offset)
+{
+	struct pl061 *pl061 = gpiochip_get_data(gc);
+
+	if (readb(pl061->base + GPIODIR) & BIT(offset))
+		return GPIO_LINE_DIRECTION_OUT;
+
+	return GPIO_LINE_DIRECTION_IN;
+}
+
+static int pl061_direction_input(struct gpio_chip *gc, unsigned offset)
+{
+	struct pl061 *pl061 = gpiochip_get_data(gc);
+	unsigned long flags;
+	unsigned char gpiodir;
+
+	raw_spin_lock_irqsave(&pl061->lock, flags);
+	gpiodir = readb(pl061->base + GPIODIR);
+	gpiodir &= ~(BIT(offset));
+	writeb(gpiodir, pl061->base + GPIODIR);
+	raw_spin_unlock_irqrestore(&pl061->lock, flags);
+
+	return 0;
+}
+
+static int pl061_direction_output(struct gpio_chip *gc, unsigned offset,
+		int value)
+{
+	struct pl061 *pl061 = gpiochip_get_data(gc);
+	unsigned long flags;
+	unsigned char gpiodir;
+
+	raw_spin_lock_irqsave(&pl061->lock, flags);
+	writeb(!!value << offset, pl061->base + (BIT(offset + 2)));
+	gpiodir = readb(pl061->base + GPIODIR);
+	gpiodir |= BIT(offset);
+	writeb(gpiodir, pl061->base + GPIODIR);
+
+	/*
+	 * gpio value is set again, because pl061 doesn't allow to set value of
+	 * a gpio pin before configuring it in OUT mode.
+	 */
+	writeb(!!value << offset, pl061->base + (BIT(offset + 2)));
+	raw_spin_unlock_irqrestore(&pl061->lock, flags);
+
+	return 0;
+}
+
+static int pl061_get_value(struct gpio_chip *gc, unsigned offset)
+{
+	struct pl061 *pl061 = gpiochip_get_data(gc);
+
+	return !!readb(pl061->base + (BIT(offset + 2)));
+}
+
+static void pl061_set_value(struct gpio_chip *gc, unsigned offset, int value)
+{
+	struct pl061 *pl061 = gpiochip_get_data(gc);
+
+	writeb(!!value << offset, pl061->base + (BIT(offset + 2)));
+}
+
+static int pl061_irq_type(struct irq_data *d, unsigned trigger)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct pl061 *pl061 = gpiochip_get_data(gc);
+	int offset = irqd_to_hwirq(d);
+	unsigned long flags;
+	u8 gpiois, gpioibe, gpioiev;
+	u8 bit = BIT(offset);
+
+	if (offset < 0 || offset >= PL061_GPIO_NR)
+		return -EINVAL;
+
+	if ((trigger & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) &&
+	    (trigger & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)))
+	{
+		dev_err(gc->parent,
+			"trying to configure line %d for both level and edge "
+			"detection, choose one!\n",
+			offset);
+		return -EINVAL;
+	}
+
+
+	raw_spin_lock_irqsave(&pl061->lock, flags);
+
+	gpioiev = readb(pl061->base + GPIOIEV);
+	gpiois = readb(pl061->base + GPIOIS);
+	gpioibe = readb(pl061->base + GPIOIBE);
+
+	if (trigger & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) {
+		bool polarity = trigger & IRQ_TYPE_LEVEL_HIGH;
+
+		/* Disable edge detection */
+		gpioibe &= ~bit;
+		/* Enable level detection */
+		gpiois |= bit;
+		/* Select polarity */
+		if (polarity)
+			gpioiev |= bit;
+		else
+			gpioiev &= ~bit;
+		irq_set_handler_locked(d, handle_level_irq);
+		dev_dbg(gc->parent, "line %d: IRQ on %s level\n",
+			offset,
+			polarity ? "HIGH" : "LOW");
+	} else if ((trigger & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH) {
+		/* Disable level detection */
+		gpiois &= ~bit;
+		/* Select both edges, setting this makes GPIOEV be ignored */
+		gpioibe |= bit;
+		irq_set_handler_locked(d, handle_edge_irq);
+		dev_dbg(gc->parent, "line %d: IRQ on both edges\n", offset);
+	} else if ((trigger & IRQ_TYPE_EDGE_RISING) ||
+		   (trigger & IRQ_TYPE_EDGE_FALLING)) {
+		bool rising = trigger & IRQ_TYPE_EDGE_RISING;
+
+		/* Disable level detection */
+		gpiois &= ~bit;
+		/* Clear detection on both edges */
+		gpioibe &= ~bit;
+		/* Select edge */
+		if (rising)
+			gpioiev |= bit;
+		else
+			gpioiev &= ~bit;
+		irq_set_handler_locked(d, handle_edge_irq);
+		dev_dbg(gc->parent, "line %d: IRQ on %s edge\n",
+			offset,
+			rising ? "RISING" : "FALLING");
+	} else {
+		/* No trigger: disable everything */
+		gpiois &= ~bit;
+		gpioibe &= ~bit;
+		gpioiev &= ~bit;
+		irq_set_handler_locked(d, handle_bad_irq);
+		dev_warn(gc->parent, "no trigger selected for line %d\n",
+			 offset);
+	}
+
+	writeb(gpiois, pl061->base + GPIOIS);
+	writeb(gpioibe, pl061->base + GPIOIBE);
+	writeb(gpioiev, pl061->base + GPIOIEV);
+
+	raw_spin_unlock_irqrestore(&pl061->lock, flags);
+
+	return 0;
+}
+
+static void pl061_irq_handler(struct irq_desc *desc)
+{
+	unsigned long pending;
+	int offset;
+	struct gpio_chip *gc = irq_desc_get_handler_data(desc);
+	struct pl061 *pl061 = gpiochip_get_data(gc);
+	struct irq_chip *irqchip = irq_desc_get_chip(desc);
+
+	chained_irq_enter(irqchip, desc);
+
+	pending = readb(pl061->base + GPIOMIS);
+	if (pending) {
+		for_each_set_bit(offset, &pending, PL061_GPIO_NR)
+			generic_handle_irq(irq_find_mapping(gc->irq.domain,
+							    offset));
+	}
+
+	chained_irq_exit(irqchip, desc);
+}
+
+static void pl061_irq_mask(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct pl061 *pl061 = gpiochip_get_data(gc);
+	u8 mask = BIT(irqd_to_hwirq(d) % PL061_GPIO_NR);
+	u8 gpioie;
+
+	raw_spin_lock(&pl061->lock);
+	gpioie = readb(pl061->base + GPIOIE) & ~mask;
+	writeb(gpioie, pl061->base + GPIOIE);
+	raw_spin_unlock(&pl061->lock);
+}
+
+static void pl061_irq_unmask(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct pl061 *pl061 = gpiochip_get_data(gc);
+	u8 mask = BIT(irqd_to_hwirq(d) % PL061_GPIO_NR);
+	u8 gpioie;
+
+	raw_spin_lock(&pl061->lock);
+	gpioie = readb(pl061->base + GPIOIE) | mask;
+	writeb(gpioie, pl061->base + GPIOIE);
+	raw_spin_unlock(&pl061->lock);
+}
+
+/**
+ * pl061_irq_ack() - ACK an edge IRQ
+ * @d: IRQ data for this IRQ
+ *
+ * This gets called from the edge IRQ handler to ACK the edge IRQ
+ * in the GPIOIC (interrupt-clear) register. For level IRQs this is
+ * not needed: these go away when the level signal goes away.
+ */
+static void pl061_irq_ack(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct pl061 *pl061 = gpiochip_get_data(gc);
+	u8 mask = BIT(irqd_to_hwirq(d) % PL061_GPIO_NR);
+
+	raw_spin_lock(&pl061->lock);
+	writeb(mask, pl061->base + GPIOIC);
+	raw_spin_unlock(&pl061->lock);
+}
+
+static int pl061_irq_set_wake(struct irq_data *d, unsigned int state)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct pl061 *pl061 = gpiochip_get_data(gc);
+
+	return irq_set_irq_wake(pl061->parent_irq, state);
+}
+
+static int pl061_probe(struct amba_device *adev, const struct amba_id *id)
+{
+	struct device *dev = &adev->dev;
+	struct pl061 *pl061;
+	struct gpio_irq_chip *girq;
+	int ret, irq;
+
+	pl061 = devm_kzalloc(dev, sizeof(*pl061), GFP_KERNEL);
+	if (pl061 == NULL)
+		return -ENOMEM;
+
+	pl061->base = devm_ioremap_resource(dev, &adev->res);
+	if (IS_ERR(pl061->base))
+		return PTR_ERR(pl061->base);
+
+	raw_spin_lock_init(&pl061->lock);
+	pl061->gc.request = gpiochip_generic_request;
+	pl061->gc.free = gpiochip_generic_free;
+	pl061->gc.base = -1;
+	pl061->gc.get_direction = pl061_get_direction;
+	pl061->gc.direction_input = pl061_direction_input;
+	pl061->gc.direction_output = pl061_direction_output;
+	pl061->gc.get = pl061_get_value;
+	pl061->gc.set = pl061_set_value;
+	pl061->gc.ngpio = PL061_GPIO_NR;
+	pl061->gc.label = dev_name(dev);
+	pl061->gc.parent = dev;
+	pl061->gc.owner = THIS_MODULE;
+
+	/*
+	 * irq_chip support
+	 */
+	pl061->irq_chip.name = dev_name(dev);
+	pl061->irq_chip.irq_ack	= pl061_irq_ack;
+	pl061->irq_chip.irq_mask = pl061_irq_mask;
+	pl061->irq_chip.irq_unmask = pl061_irq_unmask;
+	pl061->irq_chip.irq_set_type = pl061_irq_type;
+	pl061->irq_chip.irq_set_wake = pl061_irq_set_wake;
+
+	writeb(0, pl061->base + GPIOIE); /* disable irqs */
+	irq = adev->irq[0];
+	if (!irq)
+		dev_warn(&adev->dev, "IRQ support disabled\n");
+	pl061->parent_irq = irq;
+
+	girq = &pl061->gc.irq;
+	girq->chip = &pl061->irq_chip;
+	girq->parent_handler = pl061_irq_handler;
+	girq->num_parents = 1;
+	girq->parents = devm_kcalloc(dev, 1, sizeof(*girq->parents),
+				     GFP_KERNEL);
+	if (!girq->parents)
+		return -ENOMEM;
+	girq->parents[0] = irq;
+	girq->default_type = IRQ_TYPE_NONE;
+	girq->handler = handle_bad_irq;
+
+	ret = devm_gpiochip_add_data(dev, &pl061->gc, pl061);
+	if (ret)
+		return ret;
+
+	amba_set_drvdata(adev, pl061);
+	dev_info(dev, "PL061 GPIO chip registered\n");
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int pl061_suspend(struct device *dev)
+{
+	struct pl061 *pl061 = dev_get_drvdata(dev);
+	int offset;
+
+	pl061->csave_regs.gpio_data = 0;
+	pl061->csave_regs.gpio_dir = readb(pl061->base + GPIODIR);
+	pl061->csave_regs.gpio_is = readb(pl061->base + GPIOIS);
+	pl061->csave_regs.gpio_ibe = readb(pl061->base + GPIOIBE);
+	pl061->csave_regs.gpio_iev = readb(pl061->base + GPIOIEV);
+	pl061->csave_regs.gpio_ie = readb(pl061->base + GPIOIE);
+
+	for (offset = 0; offset < PL061_GPIO_NR; offset++) {
+		if (pl061->csave_regs.gpio_dir & (BIT(offset)))
+			pl061->csave_regs.gpio_data |=
+				pl061_get_value(&pl061->gc, offset) << offset;
+	}
+
+	return 0;
+}
+
+static int pl061_resume(struct device *dev)
+{
+	struct pl061 *pl061 = dev_get_drvdata(dev);
+	int offset;
+
+	for (offset = 0; offset < PL061_GPIO_NR; offset++) {
+		if (pl061->csave_regs.gpio_dir & (BIT(offset)))
+			pl061_direction_output(&pl061->gc, offset,
+					pl061->csave_regs.gpio_data &
+					(BIT(offset)));
+		else
+			pl061_direction_input(&pl061->gc, offset);
+	}
+
+	writeb(pl061->csave_regs.gpio_is, pl061->base + GPIOIS);
+	writeb(pl061->csave_regs.gpio_ibe, pl061->base + GPIOIBE);
+	writeb(pl061->csave_regs.gpio_iev, pl061->base + GPIOIEV);
+	writeb(pl061->csave_regs.gpio_ie, pl061->base + GPIOIE);
+
+	return 0;
+}
+
+static const struct dev_pm_ops pl061_dev_pm_ops = {
+	.suspend = pl061_suspend,
+	.resume = pl061_resume,
+	.freeze = pl061_suspend,
+	.restore = pl061_resume,
+};
+#endif
+
+static const struct amba_id pl061_ids[] = {
+	{
+		.id	= 0x00041061,
+		.mask	= 0x000fffff,
+	},
+	{ 0, 0 },
+};
+MODULE_DEVICE_TABLE(amba, pl061_ids);
+
+static struct amba_driver pl061_gpio_driver = {
+	.drv = {
+		.name	= "pl061_gpio",
+#ifdef CONFIG_PM
+		.pm	= &pl061_dev_pm_ops,
+#endif
+	},
+	.id_table	= pl061_ids,
+	.probe		= pl061_probe,
+};
+module_amba_driver(pl061_gpio_driver);
+
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-pmic-eic-sprd.c b/drivers/gpio/gpio-pmic-eic-sprd.c
new file mode 100644
index 000000000..e969ce913
--- /dev/null
+++ b/drivers/gpio/gpio-pmic-eic-sprd.c
@@ -0,0 +1,382 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Spreadtrum Communications Inc.
+ * Copyright (C) 2018 Linaro Ltd.
+ */
+
+#include <linux/gpio/driver.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+/* EIC registers definition */
+#define SPRD_PMIC_EIC_DATA		0x0
+#define SPRD_PMIC_EIC_DMSK		0x4
+#define SPRD_PMIC_EIC_IEV		0x14
+#define SPRD_PMIC_EIC_IE		0x18
+#define SPRD_PMIC_EIC_RIS		0x1c
+#define SPRD_PMIC_EIC_MIS		0x20
+#define SPRD_PMIC_EIC_IC		0x24
+#define SPRD_PMIC_EIC_TRIG		0x28
+#define SPRD_PMIC_EIC_CTRL0		0x40
+
+/*
+ * The PMIC EIC controller only has one bank, and each bank now can contain
+ * 16 EICs.
+ */
+#define SPRD_PMIC_EIC_PER_BANK_NR	16
+#define SPRD_PMIC_EIC_NR		SPRD_PMIC_EIC_PER_BANK_NR
+#define SPRD_PMIC_EIC_DATA_MASK		GENMASK(15, 0)
+#define SPRD_PMIC_EIC_BIT(x)		((x) & (SPRD_PMIC_EIC_PER_BANK_NR - 1))
+#define SPRD_PMIC_EIC_DBNC_MASK		GENMASK(11, 0)
+
+/*
+ * These registers are modified under the irq bus lock and cached to avoid
+ * unnecessary writes in bus_sync_unlock.
+ */
+enum {
+	REG_IEV,
+	REG_IE,
+	REG_TRIG,
+	CACHE_NR_REGS
+};
+
+/**
+ * struct sprd_pmic_eic - PMIC EIC controller
+ * @chip: the gpio_chip structure.
+ * @intc: the irq_chip structure.
+ * @map:  the regmap from the parent device.
+ * @offset: the EIC controller's offset address of the PMIC.
+ * @reg: the array to cache the EIC registers.
+ * @buslock: for bus lock/sync and unlock.
+ * @irq: the interrupt number of the PMIC EIC conteroller.
+ */
+struct sprd_pmic_eic {
+	struct gpio_chip chip;
+	struct irq_chip intc;
+	struct regmap *map;
+	u32 offset;
+	u8 reg[CACHE_NR_REGS];
+	struct mutex buslock;
+	int irq;
+};
+
+static void sprd_pmic_eic_update(struct gpio_chip *chip, unsigned int offset,
+				 u16 reg, unsigned int val)
+{
+	struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip);
+	u32 shift = SPRD_PMIC_EIC_BIT(offset);
+
+	regmap_update_bits(pmic_eic->map, pmic_eic->offset + reg,
+			   BIT(shift), val << shift);
+}
+
+static int sprd_pmic_eic_read(struct gpio_chip *chip, unsigned int offset,
+			      u16 reg)
+{
+	struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip);
+	u32 value;
+	int ret;
+
+	ret = regmap_read(pmic_eic->map, pmic_eic->offset + reg, &value);
+	if (ret)
+		return ret;
+
+	return !!(value & BIT(SPRD_PMIC_EIC_BIT(offset)));
+}
+
+static int sprd_pmic_eic_request(struct gpio_chip *chip, unsigned int offset)
+{
+	sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_DMSK, 1);
+	return 0;
+}
+
+static void sprd_pmic_eic_free(struct gpio_chip *chip, unsigned int offset)
+{
+	sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_DMSK, 0);
+}
+
+static int sprd_pmic_eic_get(struct gpio_chip *chip, unsigned int offset)
+{
+	return sprd_pmic_eic_read(chip, offset, SPRD_PMIC_EIC_DATA);
+}
+
+static int sprd_pmic_eic_direction_input(struct gpio_chip *chip,
+					 unsigned int offset)
+{
+	/* EICs are always input, nothing need to do here. */
+	return 0;
+}
+
+static void sprd_pmic_eic_set(struct gpio_chip *chip, unsigned int offset,
+			      int value)
+{
+	/* EICs are always input, nothing need to do here. */
+}
+
+static int sprd_pmic_eic_set_debounce(struct gpio_chip *chip,
+				      unsigned int offset,
+				      unsigned int debounce)
+{
+	struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip);
+	u32 reg, value;
+	int ret;
+
+	reg = SPRD_PMIC_EIC_CTRL0 + SPRD_PMIC_EIC_BIT(offset) * 0x4;
+	ret = regmap_read(pmic_eic->map, pmic_eic->offset + reg, &value);
+	if (ret)
+		return ret;
+
+	value &= ~SPRD_PMIC_EIC_DBNC_MASK;
+	value |= (debounce / 1000) & SPRD_PMIC_EIC_DBNC_MASK;
+	return regmap_write(pmic_eic->map, pmic_eic->offset + reg, value);
+}
+
+static int sprd_pmic_eic_set_config(struct gpio_chip *chip, unsigned int offset,
+				    unsigned long config)
+{
+	unsigned long param = pinconf_to_config_param(config);
+	u32 arg = pinconf_to_config_argument(config);
+
+	if (param == PIN_CONFIG_INPUT_DEBOUNCE)
+		return sprd_pmic_eic_set_debounce(chip, offset, arg);
+
+	return -ENOTSUPP;
+}
+
+static void sprd_pmic_eic_irq_mask(struct irq_data *data)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+	struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip);
+
+	pmic_eic->reg[REG_IE] = 0;
+	pmic_eic->reg[REG_TRIG] = 0;
+}
+
+static void sprd_pmic_eic_irq_unmask(struct irq_data *data)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+	struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip);
+
+	pmic_eic->reg[REG_IE] = 1;
+	pmic_eic->reg[REG_TRIG] = 1;
+}
+
+static int sprd_pmic_eic_irq_set_type(struct irq_data *data,
+				      unsigned int flow_type)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+	struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip);
+
+	switch (flow_type) {
+	case IRQ_TYPE_LEVEL_HIGH:
+		pmic_eic->reg[REG_IEV] = 1;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		pmic_eic->reg[REG_IEV] = 0;
+		break;
+	case IRQ_TYPE_EDGE_RISING:
+	case IRQ_TYPE_EDGE_FALLING:
+	case IRQ_TYPE_EDGE_BOTH:
+		/*
+		 * Will set the trigger level according to current EIC level
+		 * in irq_bus_sync_unlock() interface, so here nothing to do.
+		 */
+		break;
+	default:
+		return -ENOTSUPP;
+	}
+
+	return 0;
+}
+
+static void sprd_pmic_eic_bus_lock(struct irq_data *data)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+	struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip);
+
+	mutex_lock(&pmic_eic->buslock);
+}
+
+static void sprd_pmic_eic_bus_sync_unlock(struct irq_data *data)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+	struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip);
+	u32 trigger = irqd_get_trigger_type(data);
+	u32 offset = irqd_to_hwirq(data);
+	int state;
+
+	/* Set irq type */
+	if (trigger & IRQ_TYPE_EDGE_BOTH) {
+		state = sprd_pmic_eic_get(chip, offset);
+		if (state)
+			sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_IEV, 0);
+		else
+			sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_IEV, 1);
+	} else {
+		sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_IEV,
+				     pmic_eic->reg[REG_IEV]);
+	}
+
+	/* Set irq unmask */
+	sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_IE,
+			     pmic_eic->reg[REG_IE]);
+	/* Generate trigger start pulse for debounce EIC */
+	sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_TRIG,
+			     pmic_eic->reg[REG_TRIG]);
+
+	mutex_unlock(&pmic_eic->buslock);
+}
+
+static void sprd_pmic_eic_toggle_trigger(struct gpio_chip *chip,
+					 unsigned int irq, unsigned int offset)
+{
+	u32 trigger = irq_get_trigger_type(irq);
+	int state, post_state;
+
+	if (!(trigger & IRQ_TYPE_EDGE_BOTH))
+		return;
+
+	state = sprd_pmic_eic_get(chip, offset);
+retry:
+	if (state)
+		sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_IEV, 0);
+	else
+		sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_IEV, 1);
+
+	post_state = sprd_pmic_eic_get(chip, offset);
+	if (state != post_state) {
+		dev_warn(chip->parent, "PMIC EIC level was changed.\n");
+		state = post_state;
+		goto retry;
+	}
+
+	/* Set irq unmask */
+	sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_IE, 1);
+	/* Generate trigger start pulse for debounce EIC */
+	sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_TRIG, 1);
+}
+
+static irqreturn_t sprd_pmic_eic_irq_handler(int irq, void *data)
+{
+	struct sprd_pmic_eic *pmic_eic = data;
+	struct gpio_chip *chip = &pmic_eic->chip;
+	unsigned long status;
+	u32 n, girq, val;
+	int ret;
+
+	ret = regmap_read(pmic_eic->map, pmic_eic->offset + SPRD_PMIC_EIC_MIS,
+			  &val);
+	if (ret)
+		return IRQ_RETVAL(ret);
+
+	status = val & SPRD_PMIC_EIC_DATA_MASK;
+
+	for_each_set_bit(n, &status, chip->ngpio) {
+		/* Clear the interrupt */
+		sprd_pmic_eic_update(chip, n, SPRD_PMIC_EIC_IC, 1);
+
+		girq = irq_find_mapping(chip->irq.domain, n);
+		handle_nested_irq(girq);
+
+		/*
+		 * The PMIC EIC can only support level trigger, so we can
+		 * toggle the level trigger to emulate the edge trigger.
+		 */
+		sprd_pmic_eic_toggle_trigger(chip, girq, n);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int sprd_pmic_eic_probe(struct platform_device *pdev)
+{
+	struct gpio_irq_chip *irq;
+	struct sprd_pmic_eic *pmic_eic;
+	int ret;
+
+	pmic_eic = devm_kzalloc(&pdev->dev, sizeof(*pmic_eic), GFP_KERNEL);
+	if (!pmic_eic)
+		return -ENOMEM;
+
+	mutex_init(&pmic_eic->buslock);
+
+	pmic_eic->irq = platform_get_irq(pdev, 0);
+	if (pmic_eic->irq < 0)
+		return pmic_eic->irq;
+
+	pmic_eic->map = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!pmic_eic->map)
+		return -ENODEV;
+
+	ret = of_property_read_u32(pdev->dev.of_node, "reg", &pmic_eic->offset);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to get PMIC EIC base address.\n");
+		return ret;
+	}
+
+	ret = devm_request_threaded_irq(&pdev->dev, pmic_eic->irq, NULL,
+					sprd_pmic_eic_irq_handler,
+					IRQF_ONESHOT | IRQF_NO_SUSPEND,
+					dev_name(&pdev->dev), pmic_eic);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to request PMIC EIC IRQ.\n");
+		return ret;
+	}
+
+	pmic_eic->chip.label = dev_name(&pdev->dev);
+	pmic_eic->chip.ngpio = SPRD_PMIC_EIC_NR;
+	pmic_eic->chip.base = -1;
+	pmic_eic->chip.parent = &pdev->dev;
+	pmic_eic->chip.of_node = pdev->dev.of_node;
+	pmic_eic->chip.direction_input = sprd_pmic_eic_direction_input;
+	pmic_eic->chip.request = sprd_pmic_eic_request;
+	pmic_eic->chip.free = sprd_pmic_eic_free;
+	pmic_eic->chip.set_config = sprd_pmic_eic_set_config;
+	pmic_eic->chip.set = sprd_pmic_eic_set;
+	pmic_eic->chip.get = sprd_pmic_eic_get;
+	pmic_eic->chip.can_sleep = true;
+
+	pmic_eic->intc.name = dev_name(&pdev->dev);
+	pmic_eic->intc.irq_mask = sprd_pmic_eic_irq_mask;
+	pmic_eic->intc.irq_unmask = sprd_pmic_eic_irq_unmask;
+	pmic_eic->intc.irq_set_type = sprd_pmic_eic_irq_set_type;
+	pmic_eic->intc.irq_bus_lock = sprd_pmic_eic_bus_lock;
+	pmic_eic->intc.irq_bus_sync_unlock = sprd_pmic_eic_bus_sync_unlock;
+	pmic_eic->intc.flags = IRQCHIP_SKIP_SET_WAKE;
+
+	irq = &pmic_eic->chip.irq;
+	irq->chip = &pmic_eic->intc;
+	irq->threaded = true;
+
+	ret = devm_gpiochip_add_data(&pdev->dev, &pmic_eic->chip, pmic_eic);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Could not register gpiochip %d.\n", ret);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, pmic_eic);
+	return 0;
+}
+
+static const struct of_device_id sprd_pmic_eic_of_match[] = {
+	{ .compatible = "sprd,sc2731-eic", },
+	{ /* end of list */ }
+};
+MODULE_DEVICE_TABLE(of, sprd_pmic_eic_of_match);
+
+static struct platform_driver sprd_pmic_eic_driver = {
+	.probe = sprd_pmic_eic_probe,
+	.driver = {
+		.name = "sprd-pmic-eic",
+		.of_match_table	= sprd_pmic_eic_of_match,
+	},
+};
+
+module_platform_driver(sprd_pmic_eic_driver);
+
+MODULE_DESCRIPTION("Spreadtrum PMIC EIC driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-pxa.c b/drivers/gpio/gpio-pxa.c
new file mode 100644
index 000000000..1dbeaf6d0
--- /dev/null
+++ b/drivers/gpio/gpio-pxa.c
@@ -0,0 +1,820 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  linux/arch/arm/plat-pxa/gpio.c
+ *
+ *  Generic PXA GPIO handling
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	Jun 15, 2001
+ *  Copyright:	MontaVista Software Inc.
+ */
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/gpio/driver.h>
+#include <linux/gpio-pxa.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/syscore_ops.h>
+#include <linux/slab.h>
+
+/*
+ * We handle the GPIOs by banks, each bank covers up to 32 GPIOs with
+ * one set of registers. The register offsets are organized below:
+ *
+ *           GPLR    GPDR    GPSR    GPCR    GRER    GFER    GEDR
+ * BANK 0 - 0x0000  0x000C  0x0018  0x0024  0x0030  0x003C  0x0048
+ * BANK 1 - 0x0004  0x0010  0x001C  0x0028  0x0034  0x0040  0x004C
+ * BANK 2 - 0x0008  0x0014  0x0020  0x002C  0x0038  0x0044  0x0050
+ *
+ * BANK 3 - 0x0100  0x010C  0x0118  0x0124  0x0130  0x013C  0x0148
+ * BANK 4 - 0x0104  0x0110  0x011C  0x0128  0x0134  0x0140  0x014C
+ * BANK 5 - 0x0108  0x0114  0x0120  0x012C  0x0138  0x0144  0x0150
+ *
+ * BANK 6 - 0x0200  0x020C  0x0218  0x0224  0x0230  0x023C  0x0248
+ *
+ * NOTE:
+ *   BANK 3 is only available on PXA27x and later processors.
+ *   BANK 4 and 5 are only available on PXA935, PXA1928
+ *   BANK 6 is only available on PXA1928
+ */
+
+#define GPLR_OFFSET	0x00
+#define GPDR_OFFSET	0x0C
+#define GPSR_OFFSET	0x18
+#define GPCR_OFFSET	0x24
+#define GRER_OFFSET	0x30
+#define GFER_OFFSET	0x3C
+#define GEDR_OFFSET	0x48
+#define GAFR_OFFSET	0x54
+#define ED_MASK_OFFSET	0x9C	/* GPIO edge detection for AP side */
+
+#define BANK_OFF(n)	(((n) / 3) << 8) + (((n) % 3) << 2)
+
+int pxa_last_gpio;
+static int irq_base;
+
+struct pxa_gpio_bank {
+	void __iomem	*regbase;
+	unsigned long	irq_mask;
+	unsigned long	irq_edge_rise;
+	unsigned long	irq_edge_fall;
+
+#ifdef CONFIG_PM
+	unsigned long	saved_gplr;
+	unsigned long	saved_gpdr;
+	unsigned long	saved_grer;
+	unsigned long	saved_gfer;
+#endif
+};
+
+struct pxa_gpio_chip {
+	struct device *dev;
+	struct gpio_chip chip;
+	struct pxa_gpio_bank *banks;
+	struct irq_domain *irqdomain;
+
+	int irq0;
+	int irq1;
+	int (*set_wake)(unsigned int gpio, unsigned int on);
+};
+
+enum pxa_gpio_type {
+	PXA25X_GPIO = 0,
+	PXA26X_GPIO,
+	PXA27X_GPIO,
+	PXA3XX_GPIO,
+	PXA93X_GPIO,
+	MMP_GPIO = 0x10,
+	MMP2_GPIO,
+	PXA1928_GPIO,
+};
+
+struct pxa_gpio_id {
+	enum pxa_gpio_type	type;
+	int			gpio_nums;
+};
+
+static DEFINE_SPINLOCK(gpio_lock);
+static struct pxa_gpio_chip *pxa_gpio_chip;
+static enum pxa_gpio_type gpio_type;
+
+static struct pxa_gpio_id pxa25x_id = {
+	.type		= PXA25X_GPIO,
+	.gpio_nums	= 85,
+};
+
+static struct pxa_gpio_id pxa26x_id = {
+	.type		= PXA26X_GPIO,
+	.gpio_nums	= 90,
+};
+
+static struct pxa_gpio_id pxa27x_id = {
+	.type		= PXA27X_GPIO,
+	.gpio_nums	= 121,
+};
+
+static struct pxa_gpio_id pxa3xx_id = {
+	.type		= PXA3XX_GPIO,
+	.gpio_nums	= 128,
+};
+
+static struct pxa_gpio_id pxa93x_id = {
+	.type		= PXA93X_GPIO,
+	.gpio_nums	= 192,
+};
+
+static struct pxa_gpio_id mmp_id = {
+	.type		= MMP_GPIO,
+	.gpio_nums	= 128,
+};
+
+static struct pxa_gpio_id mmp2_id = {
+	.type		= MMP2_GPIO,
+	.gpio_nums	= 192,
+};
+
+static struct pxa_gpio_id pxa1928_id = {
+	.type		= PXA1928_GPIO,
+	.gpio_nums	= 224,
+};
+
+#define for_each_gpio_bank(i, b, pc)					\
+	for (i = 0, b = pc->banks; i <= pxa_last_gpio; i += 32, b++)
+
+static inline struct pxa_gpio_chip *chip_to_pxachip(struct gpio_chip *c)
+{
+	struct pxa_gpio_chip *pxa_chip = gpiochip_get_data(c);
+
+	return pxa_chip;
+}
+
+static inline void __iomem *gpio_bank_base(struct gpio_chip *c, int gpio)
+{
+	struct pxa_gpio_chip *p = gpiochip_get_data(c);
+	struct pxa_gpio_bank *bank = p->banks + (gpio / 32);
+
+	return bank->regbase;
+}
+
+static inline struct pxa_gpio_bank *gpio_to_pxabank(struct gpio_chip *c,
+						    unsigned gpio)
+{
+	return chip_to_pxachip(c)->banks + gpio / 32;
+}
+
+static inline int gpio_is_pxa_type(int type)
+{
+	return (type & MMP_GPIO) == 0;
+}
+
+static inline int gpio_is_mmp_type(int type)
+{
+	return (type & MMP_GPIO) != 0;
+}
+
+/* GPIO86/87/88/89 on PXA26x have their direction bits in PXA_GPDR(2 inverted,
+ * as well as their Alternate Function value being '1' for GPIO in GAFRx.
+ */
+static inline int __gpio_is_inverted(int gpio)
+{
+	if ((gpio_type == PXA26X_GPIO) && (gpio > 85))
+		return 1;
+	return 0;
+}
+
+/*
+ * On PXA25x and PXA27x, GAFRx and GPDRx together decide the alternate
+ * function of a GPIO, and GPDRx cannot be altered once configured. It
+ * is attributed as "occupied" here (I know this terminology isn't
+ * accurate, you are welcome to propose a better one :-)
+ */
+static inline int __gpio_is_occupied(struct pxa_gpio_chip *pchip, unsigned gpio)
+{
+	void __iomem *base;
+	unsigned long gafr = 0, gpdr = 0;
+	int ret, af = 0, dir = 0;
+
+	base = gpio_bank_base(&pchip->chip, gpio);
+	gpdr = readl_relaxed(base + GPDR_OFFSET);
+
+	switch (gpio_type) {
+	case PXA25X_GPIO:
+	case PXA26X_GPIO:
+	case PXA27X_GPIO:
+		gafr = readl_relaxed(base + GAFR_OFFSET);
+		af = (gafr >> ((gpio & 0xf) * 2)) & 0x3;
+		dir = gpdr & GPIO_bit(gpio);
+
+		if (__gpio_is_inverted(gpio))
+			ret = (af != 1) || (dir == 0);
+		else
+			ret = (af != 0) || (dir != 0);
+		break;
+	default:
+		ret = gpdr & GPIO_bit(gpio);
+		break;
+	}
+	return ret;
+}
+
+int pxa_irq_to_gpio(int irq)
+{
+	struct pxa_gpio_chip *pchip = pxa_gpio_chip;
+	int irq_gpio0;
+
+	irq_gpio0 = irq_find_mapping(pchip->irqdomain, 0);
+	if (irq_gpio0 > 0)
+		return irq - irq_gpio0;
+
+	return irq_gpio0;
+}
+
+static bool pxa_gpio_has_pinctrl(void)
+{
+	switch (gpio_type) {
+	case PXA3XX_GPIO:
+	case MMP2_GPIO:
+	case MMP_GPIO:
+		return false;
+
+	default:
+		return true;
+	}
+}
+
+static int pxa_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	struct pxa_gpio_chip *pchip = chip_to_pxachip(chip);
+
+	return irq_find_mapping(pchip->irqdomain, offset);
+}
+
+static int pxa_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	void __iomem *base = gpio_bank_base(chip, offset);
+	uint32_t value, mask = GPIO_bit(offset);
+	unsigned long flags;
+	int ret;
+
+	if (pxa_gpio_has_pinctrl()) {
+		ret = pinctrl_gpio_direction_input(chip->base + offset);
+		if (ret)
+			return ret;
+	}
+
+	spin_lock_irqsave(&gpio_lock, flags);
+
+	value = readl_relaxed(base + GPDR_OFFSET);
+	if (__gpio_is_inverted(chip->base + offset))
+		value |= mask;
+	else
+		value &= ~mask;
+	writel_relaxed(value, base + GPDR_OFFSET);
+
+	spin_unlock_irqrestore(&gpio_lock, flags);
+	return 0;
+}
+
+static int pxa_gpio_direction_output(struct gpio_chip *chip,
+				     unsigned offset, int value)
+{
+	void __iomem *base = gpio_bank_base(chip, offset);
+	uint32_t tmp, mask = GPIO_bit(offset);
+	unsigned long flags;
+	int ret;
+
+	writel_relaxed(mask, base + (value ? GPSR_OFFSET : GPCR_OFFSET));
+
+	if (pxa_gpio_has_pinctrl()) {
+		ret = pinctrl_gpio_direction_output(chip->base + offset);
+		if (ret)
+			return ret;
+	}
+
+	spin_lock_irqsave(&gpio_lock, flags);
+
+	tmp = readl_relaxed(base + GPDR_OFFSET);
+	if (__gpio_is_inverted(chip->base + offset))
+		tmp &= ~mask;
+	else
+		tmp |= mask;
+	writel_relaxed(tmp, base + GPDR_OFFSET);
+
+	spin_unlock_irqrestore(&gpio_lock, flags);
+	return 0;
+}
+
+static int pxa_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	void __iomem *base = gpio_bank_base(chip, offset);
+	u32 gplr = readl_relaxed(base + GPLR_OFFSET);
+
+	return !!(gplr & GPIO_bit(offset));
+}
+
+static void pxa_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	void __iomem *base = gpio_bank_base(chip, offset);
+
+	writel_relaxed(GPIO_bit(offset),
+		       base + (value ? GPSR_OFFSET : GPCR_OFFSET));
+}
+
+#ifdef CONFIG_OF_GPIO
+static int pxa_gpio_of_xlate(struct gpio_chip *gc,
+			     const struct of_phandle_args *gpiospec,
+			     u32 *flags)
+{
+	if (gpiospec->args[0] > pxa_last_gpio)
+		return -EINVAL;
+
+	if (flags)
+		*flags = gpiospec->args[1];
+
+	return gpiospec->args[0];
+}
+#endif
+
+static int pxa_init_gpio_chip(struct pxa_gpio_chip *pchip, int ngpio,
+			      struct device_node *np, void __iomem *regbase)
+{
+	int i, gpio, nbanks = DIV_ROUND_UP(ngpio, 32);
+	struct pxa_gpio_bank *bank;
+
+	pchip->banks = devm_kcalloc(pchip->dev, nbanks, sizeof(*pchip->banks),
+				    GFP_KERNEL);
+	if (!pchip->banks)
+		return -ENOMEM;
+
+	pchip->chip.label = "gpio-pxa";
+	pchip->chip.direction_input  = pxa_gpio_direction_input;
+	pchip->chip.direction_output = pxa_gpio_direction_output;
+	pchip->chip.get = pxa_gpio_get;
+	pchip->chip.set = pxa_gpio_set;
+	pchip->chip.to_irq = pxa_gpio_to_irq;
+	pchip->chip.ngpio = ngpio;
+	pchip->chip.request = gpiochip_generic_request;
+	pchip->chip.free = gpiochip_generic_free;
+
+#ifdef CONFIG_OF_GPIO
+	pchip->chip.of_node = np;
+	pchip->chip.of_xlate = pxa_gpio_of_xlate;
+	pchip->chip.of_gpio_n_cells = 2;
+#endif
+
+	for (i = 0, gpio = 0; i < nbanks; i++, gpio += 32) {
+		bank = pchip->banks + i;
+		bank->regbase = regbase + BANK_OFF(i);
+	}
+
+	return gpiochip_add_data(&pchip->chip, pchip);
+}
+
+/* Update only those GRERx and GFERx edge detection register bits if those
+ * bits are set in c->irq_mask
+ */
+static inline void update_edge_detect(struct pxa_gpio_bank *c)
+{
+	uint32_t grer, gfer;
+
+	grer = readl_relaxed(c->regbase + GRER_OFFSET) & ~c->irq_mask;
+	gfer = readl_relaxed(c->regbase + GFER_OFFSET) & ~c->irq_mask;
+	grer |= c->irq_edge_rise & c->irq_mask;
+	gfer |= c->irq_edge_fall & c->irq_mask;
+	writel_relaxed(grer, c->regbase + GRER_OFFSET);
+	writel_relaxed(gfer, c->regbase + GFER_OFFSET);
+}
+
+static int pxa_gpio_irq_type(struct irq_data *d, unsigned int type)
+{
+	struct pxa_gpio_chip *pchip = irq_data_get_irq_chip_data(d);
+	unsigned int gpio = irqd_to_hwirq(d);
+	struct pxa_gpio_bank *c = gpio_to_pxabank(&pchip->chip, gpio);
+	unsigned long gpdr, mask = GPIO_bit(gpio);
+
+	if (type == IRQ_TYPE_PROBE) {
+		/* Don't mess with enabled GPIOs using preconfigured edges or
+		 * GPIOs set to alternate function or to output during probe
+		 */
+		if ((c->irq_edge_rise | c->irq_edge_fall) & GPIO_bit(gpio))
+			return 0;
+
+		if (__gpio_is_occupied(pchip, gpio))
+			return 0;
+
+		type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
+	}
+
+	gpdr = readl_relaxed(c->regbase + GPDR_OFFSET);
+
+	if (__gpio_is_inverted(gpio))
+		writel_relaxed(gpdr | mask,  c->regbase + GPDR_OFFSET);
+	else
+		writel_relaxed(gpdr & ~mask, c->regbase + GPDR_OFFSET);
+
+	if (type & IRQ_TYPE_EDGE_RISING)
+		c->irq_edge_rise |= mask;
+	else
+		c->irq_edge_rise &= ~mask;
+
+	if (type & IRQ_TYPE_EDGE_FALLING)
+		c->irq_edge_fall |= mask;
+	else
+		c->irq_edge_fall &= ~mask;
+
+	update_edge_detect(c);
+
+	pr_debug("%s: IRQ%d (GPIO%d) - edge%s%s\n", __func__, d->irq, gpio,
+		((type & IRQ_TYPE_EDGE_RISING)  ? " rising"  : ""),
+		((type & IRQ_TYPE_EDGE_FALLING) ? " falling" : ""));
+	return 0;
+}
+
+static irqreturn_t pxa_gpio_demux_handler(int in_irq, void *d)
+{
+	int loop, gpio, n, handled = 0;
+	unsigned long gedr;
+	struct pxa_gpio_chip *pchip = d;
+	struct pxa_gpio_bank *c;
+
+	do {
+		loop = 0;
+		for_each_gpio_bank(gpio, c, pchip) {
+			gedr = readl_relaxed(c->regbase + GEDR_OFFSET);
+			gedr = gedr & c->irq_mask;
+			writel_relaxed(gedr, c->regbase + GEDR_OFFSET);
+
+			for_each_set_bit(n, &gedr, BITS_PER_LONG) {
+				loop = 1;
+
+				generic_handle_irq(
+					irq_find_mapping(pchip->irqdomain,
+							 gpio + n));
+			}
+		}
+		handled += loop;
+	} while (loop);
+
+	return handled ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static irqreturn_t pxa_gpio_direct_handler(int in_irq, void *d)
+{
+	struct pxa_gpio_chip *pchip = d;
+
+	if (in_irq == pchip->irq0) {
+		generic_handle_irq(irq_find_mapping(pchip->irqdomain, 0));
+	} else if (in_irq == pchip->irq1) {
+		generic_handle_irq(irq_find_mapping(pchip->irqdomain, 1));
+	} else {
+		pr_err("%s() unknown irq %d\n", __func__, in_irq);
+		return IRQ_NONE;
+	}
+	return IRQ_HANDLED;
+}
+
+static void pxa_ack_muxed_gpio(struct irq_data *d)
+{
+	struct pxa_gpio_chip *pchip = irq_data_get_irq_chip_data(d);
+	unsigned int gpio = irqd_to_hwirq(d);
+	void __iomem *base = gpio_bank_base(&pchip->chip, gpio);
+
+	writel_relaxed(GPIO_bit(gpio), base + GEDR_OFFSET);
+}
+
+static void pxa_mask_muxed_gpio(struct irq_data *d)
+{
+	struct pxa_gpio_chip *pchip = irq_data_get_irq_chip_data(d);
+	unsigned int gpio = irqd_to_hwirq(d);
+	struct pxa_gpio_bank *b = gpio_to_pxabank(&pchip->chip, gpio);
+	void __iomem *base = gpio_bank_base(&pchip->chip, gpio);
+	uint32_t grer, gfer;
+
+	b->irq_mask &= ~GPIO_bit(gpio);
+
+	grer = readl_relaxed(base + GRER_OFFSET) & ~GPIO_bit(gpio);
+	gfer = readl_relaxed(base + GFER_OFFSET) & ~GPIO_bit(gpio);
+	writel_relaxed(grer, base + GRER_OFFSET);
+	writel_relaxed(gfer, base + GFER_OFFSET);
+}
+
+static int pxa_gpio_set_wake(struct irq_data *d, unsigned int on)
+{
+	struct pxa_gpio_chip *pchip = irq_data_get_irq_chip_data(d);
+	unsigned int gpio = irqd_to_hwirq(d);
+
+	if (pchip->set_wake)
+		return pchip->set_wake(gpio, on);
+	else
+		return 0;
+}
+
+static void pxa_unmask_muxed_gpio(struct irq_data *d)
+{
+	struct pxa_gpio_chip *pchip = irq_data_get_irq_chip_data(d);
+	unsigned int gpio = irqd_to_hwirq(d);
+	struct pxa_gpio_bank *c = gpio_to_pxabank(&pchip->chip, gpio);
+
+	c->irq_mask |= GPIO_bit(gpio);
+	update_edge_detect(c);
+}
+
+static struct irq_chip pxa_muxed_gpio_chip = {
+	.name		= "GPIO",
+	.irq_ack	= pxa_ack_muxed_gpio,
+	.irq_mask	= pxa_mask_muxed_gpio,
+	.irq_unmask	= pxa_unmask_muxed_gpio,
+	.irq_set_type	= pxa_gpio_irq_type,
+	.irq_set_wake	= pxa_gpio_set_wake,
+};
+
+static int pxa_gpio_nums(struct platform_device *pdev)
+{
+	const struct platform_device_id *id = platform_get_device_id(pdev);
+	struct pxa_gpio_id *pxa_id = (struct pxa_gpio_id *)id->driver_data;
+	int count = 0;
+
+	switch (pxa_id->type) {
+	case PXA25X_GPIO:
+	case PXA26X_GPIO:
+	case PXA27X_GPIO:
+	case PXA3XX_GPIO:
+	case PXA93X_GPIO:
+	case MMP_GPIO:
+	case MMP2_GPIO:
+	case PXA1928_GPIO:
+		gpio_type = pxa_id->type;
+		count = pxa_id->gpio_nums - 1;
+		break;
+	default:
+		count = -EINVAL;
+		break;
+	}
+	return count;
+}
+
+static int pxa_irq_domain_map(struct irq_domain *d, unsigned int irq,
+			      irq_hw_number_t hw)
+{
+	irq_set_chip_and_handler(irq, &pxa_muxed_gpio_chip,
+				 handle_edge_irq);
+	irq_set_chip_data(irq, d->host_data);
+	irq_set_noprobe(irq);
+	return 0;
+}
+
+static const struct irq_domain_ops pxa_irq_domain_ops = {
+	.map	= pxa_irq_domain_map,
+	.xlate	= irq_domain_xlate_twocell,
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id pxa_gpio_dt_ids[] = {
+	{ .compatible = "intel,pxa25x-gpio",	.data = &pxa25x_id, },
+	{ .compatible = "intel,pxa26x-gpio",	.data = &pxa26x_id, },
+	{ .compatible = "intel,pxa27x-gpio",	.data = &pxa27x_id, },
+	{ .compatible = "intel,pxa3xx-gpio",	.data = &pxa3xx_id, },
+	{ .compatible = "marvell,pxa93x-gpio",	.data = &pxa93x_id, },
+	{ .compatible = "marvell,mmp-gpio",	.data = &mmp_id, },
+	{ .compatible = "marvell,mmp2-gpio",	.data = &mmp2_id, },
+	{ .compatible = "marvell,pxa1928-gpio",	.data = &pxa1928_id, },
+	{}
+};
+
+static int pxa_gpio_probe_dt(struct platform_device *pdev,
+			     struct pxa_gpio_chip *pchip)
+{
+	int nr_gpios;
+	const struct pxa_gpio_id *gpio_id;
+
+	gpio_id = of_device_get_match_data(&pdev->dev);
+	gpio_type = gpio_id->type;
+
+	nr_gpios = gpio_id->gpio_nums;
+	pxa_last_gpio = nr_gpios - 1;
+
+	irq_base = devm_irq_alloc_descs(&pdev->dev, -1, 0, nr_gpios, 0);
+	if (irq_base < 0) {
+		dev_err(&pdev->dev, "Failed to allocate IRQ numbers\n");
+		return irq_base;
+	}
+	return irq_base;
+}
+#else
+#define pxa_gpio_probe_dt(pdev, pchip)		(-1)
+#endif
+
+static int pxa_gpio_probe(struct platform_device *pdev)
+{
+	struct pxa_gpio_chip *pchip;
+	struct pxa_gpio_bank *c;
+	struct clk *clk;
+	struct pxa_gpio_platform_data *info;
+	void __iomem *gpio_reg_base;
+	int gpio, ret;
+	int irq0 = 0, irq1 = 0, irq_mux;
+
+	pchip = devm_kzalloc(&pdev->dev, sizeof(*pchip), GFP_KERNEL);
+	if (!pchip)
+		return -ENOMEM;
+	pchip->dev = &pdev->dev;
+
+	info = dev_get_platdata(&pdev->dev);
+	if (info) {
+		irq_base = info->irq_base;
+		if (irq_base <= 0)
+			return -EINVAL;
+		pxa_last_gpio = pxa_gpio_nums(pdev);
+		pchip->set_wake = info->gpio_set_wake;
+	} else {
+		irq_base = pxa_gpio_probe_dt(pdev, pchip);
+		if (irq_base < 0)
+			return -EINVAL;
+	}
+
+	if (!pxa_last_gpio)
+		return -EINVAL;
+
+	pchip->irqdomain = irq_domain_add_legacy(pdev->dev.of_node,
+						 pxa_last_gpio + 1, irq_base,
+						 0, &pxa_irq_domain_ops, pchip);
+	if (!pchip->irqdomain)
+		return -ENOMEM;
+
+	irq0 = platform_get_irq_byname_optional(pdev, "gpio0");
+	irq1 = platform_get_irq_byname_optional(pdev, "gpio1");
+	irq_mux = platform_get_irq_byname(pdev, "gpio_mux");
+	if ((irq0 > 0 && irq1 <= 0) || (irq0 <= 0 && irq1 > 0)
+		|| (irq_mux <= 0))
+		return -EINVAL;
+
+	pchip->irq0 = irq0;
+	pchip->irq1 = irq1;
+
+	gpio_reg_base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(gpio_reg_base))
+		return PTR_ERR(gpio_reg_base);
+
+	clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "Error %ld to get gpio clock\n",
+			PTR_ERR(clk));
+		return PTR_ERR(clk);
+	}
+	ret = clk_prepare_enable(clk);
+	if (ret) {
+		clk_put(clk);
+		return ret;
+	}
+
+	/* Initialize GPIO chips */
+	ret = pxa_init_gpio_chip(pchip, pxa_last_gpio + 1, pdev->dev.of_node,
+				 gpio_reg_base);
+	if (ret) {
+		clk_put(clk);
+		return ret;
+	}
+
+	/* clear all GPIO edge detects */
+	for_each_gpio_bank(gpio, c, pchip) {
+		writel_relaxed(0, c->regbase + GFER_OFFSET);
+		writel_relaxed(0, c->regbase + GRER_OFFSET);
+		writel_relaxed(~0, c->regbase + GEDR_OFFSET);
+		/* unmask GPIO edge detect for AP side */
+		if (gpio_is_mmp_type(gpio_type))
+			writel_relaxed(~0, c->regbase + ED_MASK_OFFSET);
+	}
+
+	if (irq0 > 0) {
+		ret = devm_request_irq(&pdev->dev,
+				       irq0, pxa_gpio_direct_handler, 0,
+				       "gpio-0", pchip);
+		if (ret)
+			dev_err(&pdev->dev, "request of gpio0 irq failed: %d\n",
+				ret);
+	}
+	if (irq1 > 0) {
+		ret = devm_request_irq(&pdev->dev,
+				       irq1, pxa_gpio_direct_handler, 0,
+				       "gpio-1", pchip);
+		if (ret)
+			dev_err(&pdev->dev, "request of gpio1 irq failed: %d\n",
+				ret);
+	}
+	ret = devm_request_irq(&pdev->dev,
+			       irq_mux, pxa_gpio_demux_handler, 0,
+				       "gpio-mux", pchip);
+	if (ret)
+		dev_err(&pdev->dev, "request of gpio-mux irq failed: %d\n",
+				ret);
+
+	pxa_gpio_chip = pchip;
+
+	return 0;
+}
+
+static const struct platform_device_id gpio_id_table[] = {
+	{ "pxa25x-gpio",	(unsigned long)&pxa25x_id },
+	{ "pxa26x-gpio",	(unsigned long)&pxa26x_id },
+	{ "pxa27x-gpio",	(unsigned long)&pxa27x_id },
+	{ "pxa3xx-gpio",	(unsigned long)&pxa3xx_id },
+	{ "pxa93x-gpio",	(unsigned long)&pxa93x_id },
+	{ "mmp-gpio",		(unsigned long)&mmp_id },
+	{ "mmp2-gpio",		(unsigned long)&mmp2_id },
+	{ "pxa1928-gpio",	(unsigned long)&pxa1928_id },
+	{ },
+};
+
+static struct platform_driver pxa_gpio_driver = {
+	.probe		= pxa_gpio_probe,
+	.driver		= {
+		.name	= "pxa-gpio",
+		.of_match_table = of_match_ptr(pxa_gpio_dt_ids),
+	},
+	.id_table	= gpio_id_table,
+};
+
+static int __init pxa_gpio_legacy_init(void)
+{
+	if (of_have_populated_dt())
+		return 0;
+
+	return platform_driver_register(&pxa_gpio_driver);
+}
+postcore_initcall(pxa_gpio_legacy_init);
+
+static int __init pxa_gpio_dt_init(void)
+{
+	if (of_have_populated_dt())
+		return platform_driver_register(&pxa_gpio_driver);
+
+	return 0;
+}
+device_initcall(pxa_gpio_dt_init);
+
+#ifdef CONFIG_PM
+static int pxa_gpio_suspend(void)
+{
+	struct pxa_gpio_chip *pchip = pxa_gpio_chip;
+	struct pxa_gpio_bank *c;
+	int gpio;
+
+	if (!pchip)
+		return 0;
+
+	for_each_gpio_bank(gpio, c, pchip) {
+		c->saved_gplr = readl_relaxed(c->regbase + GPLR_OFFSET);
+		c->saved_gpdr = readl_relaxed(c->regbase + GPDR_OFFSET);
+		c->saved_grer = readl_relaxed(c->regbase + GRER_OFFSET);
+		c->saved_gfer = readl_relaxed(c->regbase + GFER_OFFSET);
+
+		/* Clear GPIO transition detect bits */
+		writel_relaxed(0xffffffff, c->regbase + GEDR_OFFSET);
+	}
+	return 0;
+}
+
+static void pxa_gpio_resume(void)
+{
+	struct pxa_gpio_chip *pchip = pxa_gpio_chip;
+	struct pxa_gpio_bank *c;
+	int gpio;
+
+	if (!pchip)
+		return;
+
+	for_each_gpio_bank(gpio, c, pchip) {
+		/* restore level with set/clear */
+		writel_relaxed(c->saved_gplr, c->regbase + GPSR_OFFSET);
+		writel_relaxed(~c->saved_gplr, c->regbase + GPCR_OFFSET);
+
+		writel_relaxed(c->saved_grer, c->regbase + GRER_OFFSET);
+		writel_relaxed(c->saved_gfer, c->regbase + GFER_OFFSET);
+		writel_relaxed(c->saved_gpdr, c->regbase + GPDR_OFFSET);
+	}
+}
+#else
+#define pxa_gpio_suspend	NULL
+#define pxa_gpio_resume		NULL
+#endif
+
+static struct syscore_ops pxa_gpio_syscore_ops = {
+	.suspend	= pxa_gpio_suspend,
+	.resume		= pxa_gpio_resume,
+};
+
+static int __init pxa_gpio_sysinit(void)
+{
+	register_syscore_ops(&pxa_gpio_syscore_ops);
+	return 0;
+}
+postcore_initcall(pxa_gpio_sysinit);
diff --git a/drivers/gpio/gpio-raspberrypi-exp.c b/drivers/gpio/gpio-raspberrypi-exp.c
new file mode 100644
index 000000000..bb100e012
--- /dev/null
+++ b/drivers/gpio/gpio-raspberrypi-exp.c
@@ -0,0 +1,256 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *  Raspberry Pi 3 expander GPIO driver
+ *
+ *  Uses the firmware mailbox service to communicate with the
+ *  GPIO expander on the VPU.
+ *
+ *  Copyright (C) 2017 Raspberry Pi Trading Ltd.
+ */
+
+#include <linux/err.h>
+#include <linux/gpio/driver.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <soc/bcm2835/raspberrypi-firmware.h>
+
+#define MODULE_NAME "raspberrypi-exp-gpio"
+#define NUM_GPIO 8
+
+#define RPI_EXP_GPIO_BASE	128
+
+#define RPI_EXP_GPIO_DIR_IN	0
+#define RPI_EXP_GPIO_DIR_OUT	1
+
+struct rpi_exp_gpio {
+	struct gpio_chip gc;
+	struct rpi_firmware *fw;
+};
+
+/* VC4 firmware mailbox interface data structures */
+
+struct gpio_set_config {
+	u32 gpio;
+	u32 direction;
+	u32 polarity;
+	u32 term_en;
+	u32 term_pull_up;
+	u32 state;
+};
+
+struct gpio_get_config {
+	u32 gpio;
+	u32 direction;
+	u32 polarity;
+	u32 term_en;
+	u32 term_pull_up;
+};
+
+struct gpio_get_set_state {
+	u32 gpio;
+	u32 state;
+};
+
+static int rpi_exp_gpio_get_polarity(struct gpio_chip *gc, unsigned int off)
+{
+	struct rpi_exp_gpio *gpio;
+	struct gpio_get_config get;
+	int ret;
+
+	gpio = gpiochip_get_data(gc);
+
+	get.gpio = off + RPI_EXP_GPIO_BASE;	/* GPIO to update */
+
+	ret = rpi_firmware_property(gpio->fw, RPI_FIRMWARE_GET_GPIO_CONFIG,
+				    &get, sizeof(get));
+	if (ret || get.gpio != 0) {
+		dev_err(gc->parent, "Failed to get GPIO %u config (%d %x)\n",
+			off, ret, get.gpio);
+		return ret ? ret : -EIO;
+	}
+	return get.polarity;
+}
+
+static int rpi_exp_gpio_dir_in(struct gpio_chip *gc, unsigned int off)
+{
+	struct rpi_exp_gpio *gpio;
+	struct gpio_set_config set_in;
+	int ret;
+
+	gpio = gpiochip_get_data(gc);
+
+	set_in.gpio = off + RPI_EXP_GPIO_BASE;	/* GPIO to update */
+	set_in.direction = RPI_EXP_GPIO_DIR_IN;
+	set_in.term_en = 0;		/* termination disabled */
+	set_in.term_pull_up = 0;	/* n/a as termination disabled */
+	set_in.state = 0;		/* n/a as configured as an input */
+
+	ret = rpi_exp_gpio_get_polarity(gc, off);
+	if (ret < 0)
+		return ret;
+	set_in.polarity = ret;		/* Retain existing setting */
+
+	ret = rpi_firmware_property(gpio->fw, RPI_FIRMWARE_SET_GPIO_CONFIG,
+				    &set_in, sizeof(set_in));
+	if (ret || set_in.gpio != 0) {
+		dev_err(gc->parent, "Failed to set GPIO %u to input (%d %x)\n",
+			off, ret, set_in.gpio);
+		return ret ? ret : -EIO;
+	}
+	return 0;
+}
+
+static int rpi_exp_gpio_dir_out(struct gpio_chip *gc, unsigned int off, int val)
+{
+	struct rpi_exp_gpio *gpio;
+	struct gpio_set_config set_out;
+	int ret;
+
+	gpio = gpiochip_get_data(gc);
+
+	set_out.gpio = off + RPI_EXP_GPIO_BASE;	/* GPIO to update */
+	set_out.direction = RPI_EXP_GPIO_DIR_OUT;
+	set_out.term_en = 0;		/* n/a as an output */
+	set_out.term_pull_up = 0;	/* n/a as termination disabled */
+	set_out.state = val;		/* Output state */
+
+	ret = rpi_exp_gpio_get_polarity(gc, off);
+	if (ret < 0)
+		return ret;
+	set_out.polarity = ret;		/* Retain existing setting */
+
+	ret = rpi_firmware_property(gpio->fw, RPI_FIRMWARE_SET_GPIO_CONFIG,
+				    &set_out, sizeof(set_out));
+	if (ret || set_out.gpio != 0) {
+		dev_err(gc->parent, "Failed to set GPIO %u to output (%d %x)\n",
+			off, ret, set_out.gpio);
+		return ret ? ret : -EIO;
+	}
+	return 0;
+}
+
+static int rpi_exp_gpio_get_direction(struct gpio_chip *gc, unsigned int off)
+{
+	struct rpi_exp_gpio *gpio;
+	struct gpio_get_config get;
+	int ret;
+
+	gpio = gpiochip_get_data(gc);
+
+	get.gpio = off + RPI_EXP_GPIO_BASE;	/* GPIO to update */
+
+	ret = rpi_firmware_property(gpio->fw, RPI_FIRMWARE_GET_GPIO_CONFIG,
+				    &get, sizeof(get));
+	if (ret || get.gpio != 0) {
+		dev_err(gc->parent,
+			"Failed to get GPIO %u config (%d %x)\n", off, ret,
+			get.gpio);
+		return ret ? ret : -EIO;
+	}
+	if (get.direction)
+		return GPIO_LINE_DIRECTION_OUT;
+
+	return GPIO_LINE_DIRECTION_IN;
+}
+
+static int rpi_exp_gpio_get(struct gpio_chip *gc, unsigned int off)
+{
+	struct rpi_exp_gpio *gpio;
+	struct gpio_get_set_state get;
+	int ret;
+
+	gpio = gpiochip_get_data(gc);
+
+	get.gpio = off + RPI_EXP_GPIO_BASE;	/* GPIO to update */
+	get.state = 0;		/* storage for returned value */
+
+	ret = rpi_firmware_property(gpio->fw, RPI_FIRMWARE_GET_GPIO_STATE,
+					 &get, sizeof(get));
+	if (ret || get.gpio != 0) {
+		dev_err(gc->parent,
+			"Failed to get GPIO %u state (%d %x)\n", off, ret,
+			get.gpio);
+		return ret ? ret : -EIO;
+	}
+	return !!get.state;
+}
+
+static void rpi_exp_gpio_set(struct gpio_chip *gc, unsigned int off, int val)
+{
+	struct rpi_exp_gpio *gpio;
+	struct gpio_get_set_state set;
+	int ret;
+
+	gpio = gpiochip_get_data(gc);
+
+	set.gpio = off + RPI_EXP_GPIO_BASE;	/* GPIO to update */
+	set.state = val;	/* Output state */
+
+	ret = rpi_firmware_property(gpio->fw, RPI_FIRMWARE_SET_GPIO_STATE,
+					 &set, sizeof(set));
+	if (ret || set.gpio != 0)
+		dev_err(gc->parent,
+			"Failed to set GPIO %u state (%d %x)\n", off, ret,
+			set.gpio);
+}
+
+static int rpi_exp_gpio_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct device_node *fw_node;
+	struct rpi_firmware *fw;
+	struct rpi_exp_gpio *rpi_gpio;
+
+	fw_node = of_get_parent(np);
+	if (!fw_node) {
+		dev_err(dev, "Missing firmware node\n");
+		return -ENOENT;
+	}
+
+	fw = rpi_firmware_get(fw_node);
+	of_node_put(fw_node);
+	if (!fw)
+		return -EPROBE_DEFER;
+
+	rpi_gpio = devm_kzalloc(dev, sizeof(*rpi_gpio), GFP_KERNEL);
+	if (!rpi_gpio)
+		return -ENOMEM;
+
+	rpi_gpio->fw = fw;
+	rpi_gpio->gc.parent = dev;
+	rpi_gpio->gc.label = MODULE_NAME;
+	rpi_gpio->gc.owner = THIS_MODULE;
+	rpi_gpio->gc.of_node = np;
+	rpi_gpio->gc.base = -1;
+	rpi_gpio->gc.ngpio = NUM_GPIO;
+
+	rpi_gpio->gc.direction_input = rpi_exp_gpio_dir_in;
+	rpi_gpio->gc.direction_output = rpi_exp_gpio_dir_out;
+	rpi_gpio->gc.get_direction = rpi_exp_gpio_get_direction;
+	rpi_gpio->gc.get = rpi_exp_gpio_get;
+	rpi_gpio->gc.set = rpi_exp_gpio_set;
+	rpi_gpio->gc.can_sleep = true;
+
+	return devm_gpiochip_add_data(dev, &rpi_gpio->gc, rpi_gpio);
+}
+
+static const struct of_device_id rpi_exp_gpio_ids[] = {
+	{ .compatible = "raspberrypi,firmware-gpio" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, rpi_exp_gpio_ids);
+
+static struct platform_driver rpi_exp_gpio_driver = {
+	.driver	= {
+		.name		= MODULE_NAME,
+		.of_match_table	= of_match_ptr(rpi_exp_gpio_ids),
+	},
+	.probe	= rpi_exp_gpio_probe,
+};
+module_platform_driver(rpi_exp_gpio_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Dave Stevenson <dave.stevenson@raspberrypi.org>");
+MODULE_DESCRIPTION("Raspberry Pi 3 expander GPIO driver");
+MODULE_ALIAS("platform:rpi-exp-gpio");
diff --git a/drivers/gpio/gpio-rc5t583.c b/drivers/gpio/gpio-rc5t583.c
new file mode 100644
index 000000000..4fae3ebea
--- /dev/null
+++ b/drivers/gpio/gpio-rc5t583.c
@@ -0,0 +1,141 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * GPIO driver for RICOH583 power management chip.
+ *
+ * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
+ * Author: Laxman dewangan <ldewangan@nvidia.com>
+ *
+ * Based on code
+ *	Copyright (C) 2011 RICOH COMPANY,LTD
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/device.h>
+#include <linux/gpio/driver.h>
+#include <linux/mfd/rc5t583.h>
+
+struct rc5t583_gpio {
+	struct gpio_chip gpio_chip;
+	struct rc5t583 *rc5t583;
+};
+
+static int rc5t583_gpio_get(struct gpio_chip *gc, unsigned int offset)
+{
+	struct rc5t583_gpio *rc5t583_gpio = gpiochip_get_data(gc);
+	struct device *parent = rc5t583_gpio->rc5t583->dev;
+	uint8_t val = 0;
+	int ret;
+
+	ret = rc5t583_read(parent, RC5T583_GPIO_MON_IOIN, &val);
+	if (ret < 0)
+		return ret;
+
+	return !!(val & BIT(offset));
+}
+
+static void rc5t583_gpio_set(struct gpio_chip *gc, unsigned int offset, int val)
+{
+	struct rc5t583_gpio *rc5t583_gpio = gpiochip_get_data(gc);
+	struct device *parent = rc5t583_gpio->rc5t583->dev;
+	if (val)
+		rc5t583_set_bits(parent, RC5T583_GPIO_IOOUT, BIT(offset));
+	else
+		rc5t583_clear_bits(parent, RC5T583_GPIO_IOOUT, BIT(offset));
+}
+
+static int rc5t583_gpio_dir_input(struct gpio_chip *gc, unsigned int offset)
+{
+	struct rc5t583_gpio *rc5t583_gpio = gpiochip_get_data(gc);
+	struct device *parent = rc5t583_gpio->rc5t583->dev;
+	int ret;
+
+	ret = rc5t583_clear_bits(parent, RC5T583_GPIO_IOSEL, BIT(offset));
+	if (ret < 0)
+		return ret;
+
+	/* Set pin to gpio mode */
+	return rc5t583_clear_bits(parent, RC5T583_GPIO_PGSEL, BIT(offset));
+}
+
+static int rc5t583_gpio_dir_output(struct gpio_chip *gc, unsigned offset,
+			int value)
+{
+	struct rc5t583_gpio *rc5t583_gpio = gpiochip_get_data(gc);
+	struct device *parent = rc5t583_gpio->rc5t583->dev;
+	int ret;
+
+	rc5t583_gpio_set(gc, offset, value);
+	ret = rc5t583_set_bits(parent, RC5T583_GPIO_IOSEL, BIT(offset));
+	if (ret < 0)
+		return ret;
+
+	/* Set pin to gpio mode */
+	return rc5t583_clear_bits(parent, RC5T583_GPIO_PGSEL, BIT(offset));
+}
+
+static int rc5t583_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
+{
+	struct rc5t583_gpio *rc5t583_gpio = gpiochip_get_data(gc);
+
+	if (offset < RC5T583_MAX_GPIO)
+		return rc5t583_gpio->rc5t583->irq_base +
+				RC5T583_IRQ_GPIO0 + offset;
+	return -EINVAL;
+}
+
+static void rc5t583_gpio_free(struct gpio_chip *gc, unsigned offset)
+{
+	struct rc5t583_gpio *rc5t583_gpio = gpiochip_get_data(gc);
+	struct device *parent = rc5t583_gpio->rc5t583->dev;
+
+	rc5t583_set_bits(parent, RC5T583_GPIO_PGSEL, BIT(offset));
+}
+
+static int rc5t583_gpio_probe(struct platform_device *pdev)
+{
+	struct rc5t583 *rc5t583 = dev_get_drvdata(pdev->dev.parent);
+	struct rc5t583_platform_data *pdata = dev_get_platdata(rc5t583->dev);
+	struct rc5t583_gpio *rc5t583_gpio;
+
+	rc5t583_gpio = devm_kzalloc(&pdev->dev, sizeof(*rc5t583_gpio),
+					GFP_KERNEL);
+	if (!rc5t583_gpio)
+		return -ENOMEM;
+
+	rc5t583_gpio->gpio_chip.label = "gpio-rc5t583",
+	rc5t583_gpio->gpio_chip.owner = THIS_MODULE,
+	rc5t583_gpio->gpio_chip.free = rc5t583_gpio_free,
+	rc5t583_gpio->gpio_chip.direction_input = rc5t583_gpio_dir_input,
+	rc5t583_gpio->gpio_chip.direction_output = rc5t583_gpio_dir_output,
+	rc5t583_gpio->gpio_chip.set = rc5t583_gpio_set,
+	rc5t583_gpio->gpio_chip.get = rc5t583_gpio_get,
+	rc5t583_gpio->gpio_chip.to_irq = rc5t583_gpio_to_irq,
+	rc5t583_gpio->gpio_chip.ngpio = RC5T583_MAX_GPIO,
+	rc5t583_gpio->gpio_chip.can_sleep = true,
+	rc5t583_gpio->gpio_chip.parent = &pdev->dev;
+	rc5t583_gpio->gpio_chip.base = -1;
+	rc5t583_gpio->rc5t583 = rc5t583;
+
+	if (pdata && pdata->gpio_base)
+		rc5t583_gpio->gpio_chip.base = pdata->gpio_base;
+
+	platform_set_drvdata(pdev, rc5t583_gpio);
+
+	return devm_gpiochip_add_data(&pdev->dev, &rc5t583_gpio->gpio_chip,
+				      rc5t583_gpio);
+}
+
+static struct platform_driver rc5t583_gpio_driver = {
+	.driver = {
+		.name    = "rc5t583-gpio",
+	},
+	.probe		= rc5t583_gpio_probe,
+};
+
+static int __init rc5t583_gpio_init(void)
+{
+	return platform_driver_register(&rc5t583_gpio_driver);
+}
+subsys_initcall(rc5t583_gpio_init);
diff --git a/drivers/gpio/gpio-rcar.c b/drivers/gpio/gpio-rcar.c
new file mode 100644
index 000000000..3ef19cef8
--- /dev/null
+++ b/drivers/gpio/gpio-rcar.c
@@ -0,0 +1,618 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Renesas R-Car GPIO Support
+ *
+ *  Copyright (C) 2014 Renesas Electronics Corporation
+ *  Copyright (C) 2013 Magnus Damm
+ */
+
+#include <linux/err.h>
+#include <linux/gpio/driver.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+
+struct gpio_rcar_bank_info {
+	u32 iointsel;
+	u32 inoutsel;
+	u32 outdt;
+	u32 posneg;
+	u32 edglevel;
+	u32 bothedge;
+	u32 intmsk;
+};
+
+struct gpio_rcar_priv {
+	void __iomem *base;
+	spinlock_t lock;
+	struct device *dev;
+	struct gpio_chip gpio_chip;
+	struct irq_chip irq_chip;
+	unsigned int irq_parent;
+	atomic_t wakeup_path;
+	bool has_outdtsel;
+	bool has_both_edge_trigger;
+	struct gpio_rcar_bank_info bank_info;
+};
+
+#define IOINTSEL 0x00	/* General IO/Interrupt Switching Register */
+#define INOUTSEL 0x04	/* General Input/Output Switching Register */
+#define OUTDT 0x08	/* General Output Register */
+#define INDT 0x0c	/* General Input Register */
+#define INTDT 0x10	/* Interrupt Display Register */
+#define INTCLR 0x14	/* Interrupt Clear Register */
+#define INTMSK 0x18	/* Interrupt Mask Register */
+#define MSKCLR 0x1c	/* Interrupt Mask Clear Register */
+#define POSNEG 0x20	/* Positive/Negative Logic Select Register */
+#define EDGLEVEL 0x24	/* Edge/level Select Register */
+#define FILONOFF 0x28	/* Chattering Prevention On/Off Register */
+#define OUTDTSEL 0x40	/* Output Data Select Register */
+#define BOTHEDGE 0x4c	/* One Edge/Both Edge Select Register */
+
+#define RCAR_MAX_GPIO_PER_BANK		32
+
+static inline u32 gpio_rcar_read(struct gpio_rcar_priv *p, int offs)
+{
+	return ioread32(p->base + offs);
+}
+
+static inline void gpio_rcar_write(struct gpio_rcar_priv *p, int offs,
+				   u32 value)
+{
+	iowrite32(value, p->base + offs);
+}
+
+static void gpio_rcar_modify_bit(struct gpio_rcar_priv *p, int offs,
+				 int bit, bool value)
+{
+	u32 tmp = gpio_rcar_read(p, offs);
+
+	if (value)
+		tmp |= BIT(bit);
+	else
+		tmp &= ~BIT(bit);
+
+	gpio_rcar_write(p, offs, tmp);
+}
+
+static void gpio_rcar_irq_disable(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct gpio_rcar_priv *p = gpiochip_get_data(gc);
+
+	gpio_rcar_write(p, INTMSK, ~BIT(irqd_to_hwirq(d)));
+}
+
+static void gpio_rcar_irq_enable(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct gpio_rcar_priv *p = gpiochip_get_data(gc);
+
+	gpio_rcar_write(p, MSKCLR, BIT(irqd_to_hwirq(d)));
+}
+
+static void gpio_rcar_config_interrupt_input_mode(struct gpio_rcar_priv *p,
+						  unsigned int hwirq,
+						  bool active_high_rising_edge,
+						  bool level_trigger,
+						  bool both)
+{
+	unsigned long flags;
+
+	/* follow steps in the GPIO documentation for
+	 * "Setting Edge-Sensitive Interrupt Input Mode" and
+	 * "Setting Level-Sensitive Interrupt Input Mode"
+	 */
+
+	spin_lock_irqsave(&p->lock, flags);
+
+	/* Configure positive or negative logic in POSNEG */
+	gpio_rcar_modify_bit(p, POSNEG, hwirq, !active_high_rising_edge);
+
+	/* Configure edge or level trigger in EDGLEVEL */
+	gpio_rcar_modify_bit(p, EDGLEVEL, hwirq, !level_trigger);
+
+	/* Select one edge or both edges in BOTHEDGE */
+	if (p->has_both_edge_trigger)
+		gpio_rcar_modify_bit(p, BOTHEDGE, hwirq, both);
+
+	/* Select "Interrupt Input Mode" in IOINTSEL */
+	gpio_rcar_modify_bit(p, IOINTSEL, hwirq, true);
+
+	/* Write INTCLR in case of edge trigger */
+	if (!level_trigger)
+		gpio_rcar_write(p, INTCLR, BIT(hwirq));
+
+	spin_unlock_irqrestore(&p->lock, flags);
+}
+
+static int gpio_rcar_irq_set_type(struct irq_data *d, unsigned int type)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct gpio_rcar_priv *p = gpiochip_get_data(gc);
+	unsigned int hwirq = irqd_to_hwirq(d);
+
+	dev_dbg(p->dev, "sense irq = %d, type = %d\n", hwirq, type);
+
+	switch (type & IRQ_TYPE_SENSE_MASK) {
+	case IRQ_TYPE_LEVEL_HIGH:
+		gpio_rcar_config_interrupt_input_mode(p, hwirq, true, true,
+						      false);
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		gpio_rcar_config_interrupt_input_mode(p, hwirq, false, true,
+						      false);
+		break;
+	case IRQ_TYPE_EDGE_RISING:
+		gpio_rcar_config_interrupt_input_mode(p, hwirq, true, false,
+						      false);
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		gpio_rcar_config_interrupt_input_mode(p, hwirq, false, false,
+						      false);
+		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		if (!p->has_both_edge_trigger)
+			return -EINVAL;
+		gpio_rcar_config_interrupt_input_mode(p, hwirq, true, false,
+						      true);
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int gpio_rcar_irq_set_wake(struct irq_data *d, unsigned int on)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct gpio_rcar_priv *p = gpiochip_get_data(gc);
+	int error;
+
+	if (p->irq_parent) {
+		error = irq_set_irq_wake(p->irq_parent, on);
+		if (error) {
+			dev_dbg(p->dev, "irq %u doesn't support irq_set_wake\n",
+				p->irq_parent);
+			p->irq_parent = 0;
+		}
+	}
+
+	if (on)
+		atomic_inc(&p->wakeup_path);
+	else
+		atomic_dec(&p->wakeup_path);
+
+	return 0;
+}
+
+static irqreturn_t gpio_rcar_irq_handler(int irq, void *dev_id)
+{
+	struct gpio_rcar_priv *p = dev_id;
+	u32 pending;
+	unsigned int offset, irqs_handled = 0;
+
+	while ((pending = gpio_rcar_read(p, INTDT) &
+			  gpio_rcar_read(p, INTMSK))) {
+		offset = __ffs(pending);
+		gpio_rcar_write(p, INTCLR, BIT(offset));
+		generic_handle_irq(irq_find_mapping(p->gpio_chip.irq.domain,
+						    offset));
+		irqs_handled++;
+	}
+
+	return irqs_handled ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static void gpio_rcar_config_general_input_output_mode(struct gpio_chip *chip,
+						       unsigned int gpio,
+						       bool output)
+{
+	struct gpio_rcar_priv *p = gpiochip_get_data(chip);
+	unsigned long flags;
+
+	/* follow steps in the GPIO documentation for
+	 * "Setting General Output Mode" and
+	 * "Setting General Input Mode"
+	 */
+
+	spin_lock_irqsave(&p->lock, flags);
+
+	/* Configure positive logic in POSNEG */
+	gpio_rcar_modify_bit(p, POSNEG, gpio, false);
+
+	/* Select "General Input/Output Mode" in IOINTSEL */
+	gpio_rcar_modify_bit(p, IOINTSEL, gpio, false);
+
+	/* Select Input Mode or Output Mode in INOUTSEL */
+	gpio_rcar_modify_bit(p, INOUTSEL, gpio, output);
+
+	/* Select General Output Register to output data in OUTDTSEL */
+	if (p->has_outdtsel && output)
+		gpio_rcar_modify_bit(p, OUTDTSEL, gpio, false);
+
+	spin_unlock_irqrestore(&p->lock, flags);
+}
+
+static int gpio_rcar_request(struct gpio_chip *chip, unsigned offset)
+{
+	struct gpio_rcar_priv *p = gpiochip_get_data(chip);
+	int error;
+
+	error = pm_runtime_get_sync(p->dev);
+	if (error < 0) {
+		pm_runtime_put(p->dev);
+		return error;
+	}
+
+	error = pinctrl_gpio_request(chip->base + offset);
+	if (error)
+		pm_runtime_put(p->dev);
+
+	return error;
+}
+
+static void gpio_rcar_free(struct gpio_chip *chip, unsigned offset)
+{
+	struct gpio_rcar_priv *p = gpiochip_get_data(chip);
+
+	pinctrl_gpio_free(chip->base + offset);
+
+	/*
+	 * Set the GPIO as an input to ensure that the next GPIO request won't
+	 * drive the GPIO pin as an output.
+	 */
+	gpio_rcar_config_general_input_output_mode(chip, offset, false);
+
+	pm_runtime_put(p->dev);
+}
+
+static int gpio_rcar_get_direction(struct gpio_chip *chip, unsigned int offset)
+{
+	struct gpio_rcar_priv *p = gpiochip_get_data(chip);
+
+	if (gpio_rcar_read(p, INOUTSEL) & BIT(offset))
+		return GPIO_LINE_DIRECTION_OUT;
+
+	return GPIO_LINE_DIRECTION_IN;
+}
+
+static int gpio_rcar_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	gpio_rcar_config_general_input_output_mode(chip, offset, false);
+	return 0;
+}
+
+static int gpio_rcar_get(struct gpio_chip *chip, unsigned offset)
+{
+	u32 bit = BIT(offset);
+
+	/* testing on r8a7790 shows that INDT does not show correct pin state
+	 * when configured as output, so use OUTDT in case of output pins */
+	if (gpio_rcar_read(gpiochip_get_data(chip), INOUTSEL) & bit)
+		return !!(gpio_rcar_read(gpiochip_get_data(chip), OUTDT) & bit);
+	else
+		return !!(gpio_rcar_read(gpiochip_get_data(chip), INDT) & bit);
+}
+
+static void gpio_rcar_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct gpio_rcar_priv *p = gpiochip_get_data(chip);
+	unsigned long flags;
+
+	spin_lock_irqsave(&p->lock, flags);
+	gpio_rcar_modify_bit(p, OUTDT, offset, value);
+	spin_unlock_irqrestore(&p->lock, flags);
+}
+
+static void gpio_rcar_set_multiple(struct gpio_chip *chip, unsigned long *mask,
+				   unsigned long *bits)
+{
+	struct gpio_rcar_priv *p = gpiochip_get_data(chip);
+	unsigned long flags;
+	u32 val, bankmask;
+
+	bankmask = mask[0] & GENMASK(chip->ngpio - 1, 0);
+	if (chip->valid_mask)
+		bankmask &= chip->valid_mask[0];
+
+	if (!bankmask)
+		return;
+
+	spin_lock_irqsave(&p->lock, flags);
+	val = gpio_rcar_read(p, OUTDT);
+	val &= ~bankmask;
+	val |= (bankmask & bits[0]);
+	gpio_rcar_write(p, OUTDT, val);
+	spin_unlock_irqrestore(&p->lock, flags);
+}
+
+static int gpio_rcar_direction_output(struct gpio_chip *chip, unsigned offset,
+				      int value)
+{
+	/* write GPIO value to output before selecting output mode of pin */
+	gpio_rcar_set(chip, offset, value);
+	gpio_rcar_config_general_input_output_mode(chip, offset, true);
+	return 0;
+}
+
+struct gpio_rcar_info {
+	bool has_outdtsel;
+	bool has_both_edge_trigger;
+};
+
+static const struct gpio_rcar_info gpio_rcar_info_gen1 = {
+	.has_outdtsel = false,
+	.has_both_edge_trigger = false,
+};
+
+static const struct gpio_rcar_info gpio_rcar_info_gen2 = {
+	.has_outdtsel = true,
+	.has_both_edge_trigger = true,
+};
+
+static const struct of_device_id gpio_rcar_of_table[] = {
+	{
+		.compatible = "renesas,gpio-r8a7743",
+		/* RZ/G1 GPIO is identical to R-Car Gen2. */
+		.data = &gpio_rcar_info_gen2,
+	}, {
+		.compatible = "renesas,gpio-r8a7790",
+		.data = &gpio_rcar_info_gen2,
+	}, {
+		.compatible = "renesas,gpio-r8a7791",
+		.data = &gpio_rcar_info_gen2,
+	}, {
+		.compatible = "renesas,gpio-r8a7792",
+		.data = &gpio_rcar_info_gen2,
+	}, {
+		.compatible = "renesas,gpio-r8a7793",
+		.data = &gpio_rcar_info_gen2,
+	}, {
+		.compatible = "renesas,gpio-r8a7794",
+		.data = &gpio_rcar_info_gen2,
+	}, {
+		.compatible = "renesas,gpio-r8a7795",
+		/* Gen3 GPIO is identical to Gen2. */
+		.data = &gpio_rcar_info_gen2,
+	}, {
+		.compatible = "renesas,gpio-r8a7796",
+		/* Gen3 GPIO is identical to Gen2. */
+		.data = &gpio_rcar_info_gen2,
+	}, {
+		.compatible = "renesas,rcar-gen1-gpio",
+		.data = &gpio_rcar_info_gen1,
+	}, {
+		.compatible = "renesas,rcar-gen2-gpio",
+		.data = &gpio_rcar_info_gen2,
+	}, {
+		.compatible = "renesas,rcar-gen3-gpio",
+		/* Gen3 GPIO is identical to Gen2. */
+		.data = &gpio_rcar_info_gen2,
+	}, {
+		.compatible = "renesas,gpio-rcar",
+		.data = &gpio_rcar_info_gen1,
+	}, {
+		/* Terminator */
+	},
+};
+
+MODULE_DEVICE_TABLE(of, gpio_rcar_of_table);
+
+static int gpio_rcar_parse_dt(struct gpio_rcar_priv *p, unsigned int *npins)
+{
+	struct device_node *np = p->dev->of_node;
+	const struct gpio_rcar_info *info;
+	struct of_phandle_args args;
+	int ret;
+
+	info = of_device_get_match_data(p->dev);
+	p->has_outdtsel = info->has_outdtsel;
+	p->has_both_edge_trigger = info->has_both_edge_trigger;
+
+	ret = of_parse_phandle_with_fixed_args(np, "gpio-ranges", 3, 0, &args);
+	*npins = ret == 0 ? args.args[2] : RCAR_MAX_GPIO_PER_BANK;
+
+	if (*npins == 0 || *npins > RCAR_MAX_GPIO_PER_BANK) {
+		dev_warn(p->dev, "Invalid number of gpio lines %u, using %u\n",
+			 *npins, RCAR_MAX_GPIO_PER_BANK);
+		*npins = RCAR_MAX_GPIO_PER_BANK;
+	}
+
+	return 0;
+}
+
+static int gpio_rcar_probe(struct platform_device *pdev)
+{
+	struct gpio_rcar_priv *p;
+	struct resource *irq;
+	struct gpio_chip *gpio_chip;
+	struct irq_chip *irq_chip;
+	struct gpio_irq_chip *girq;
+	struct device *dev = &pdev->dev;
+	const char *name = dev_name(dev);
+	unsigned int npins;
+	int ret;
+
+	p = devm_kzalloc(dev, sizeof(*p), GFP_KERNEL);
+	if (!p)
+		return -ENOMEM;
+
+	p->dev = dev;
+	spin_lock_init(&p->lock);
+
+	/* Get device configuration from DT node */
+	ret = gpio_rcar_parse_dt(p, &npins);
+	if (ret < 0)
+		return ret;
+
+	platform_set_drvdata(pdev, p);
+
+	pm_runtime_enable(dev);
+
+	irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!irq) {
+		dev_err(dev, "missing IRQ\n");
+		ret = -EINVAL;
+		goto err0;
+	}
+
+	p->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(p->base)) {
+		ret = PTR_ERR(p->base);
+		goto err0;
+	}
+
+	gpio_chip = &p->gpio_chip;
+	gpio_chip->request = gpio_rcar_request;
+	gpio_chip->free = gpio_rcar_free;
+	gpio_chip->get_direction = gpio_rcar_get_direction;
+	gpio_chip->direction_input = gpio_rcar_direction_input;
+	gpio_chip->get = gpio_rcar_get;
+	gpio_chip->direction_output = gpio_rcar_direction_output;
+	gpio_chip->set = gpio_rcar_set;
+	gpio_chip->set_multiple = gpio_rcar_set_multiple;
+	gpio_chip->label = name;
+	gpio_chip->parent = dev;
+	gpio_chip->owner = THIS_MODULE;
+	gpio_chip->base = -1;
+	gpio_chip->ngpio = npins;
+
+	irq_chip = &p->irq_chip;
+	irq_chip->name = "gpio-rcar";
+	irq_chip->parent_device = dev;
+	irq_chip->irq_mask = gpio_rcar_irq_disable;
+	irq_chip->irq_unmask = gpio_rcar_irq_enable;
+	irq_chip->irq_set_type = gpio_rcar_irq_set_type;
+	irq_chip->irq_set_wake = gpio_rcar_irq_set_wake;
+	irq_chip->flags = IRQCHIP_SET_TYPE_MASKED | IRQCHIP_MASK_ON_SUSPEND;
+
+	girq = &gpio_chip->irq;
+	girq->chip = irq_chip;
+	/* This will let us handle the parent IRQ in the driver */
+	girq->parent_handler = NULL;
+	girq->num_parents = 0;
+	girq->parents = NULL;
+	girq->default_type = IRQ_TYPE_NONE;
+	girq->handler = handle_level_irq;
+
+	ret = gpiochip_add_data(gpio_chip, p);
+	if (ret) {
+		dev_err(dev, "failed to add GPIO controller\n");
+		goto err0;
+	}
+
+	p->irq_parent = irq->start;
+	if (devm_request_irq(dev, irq->start, gpio_rcar_irq_handler,
+			     IRQF_SHARED, name, p)) {
+		dev_err(dev, "failed to request IRQ\n");
+		ret = -ENOENT;
+		goto err1;
+	}
+
+	dev_info(dev, "driving %d GPIOs\n", npins);
+
+	return 0;
+
+err1:
+	gpiochip_remove(gpio_chip);
+err0:
+	pm_runtime_disable(dev);
+	return ret;
+}
+
+static int gpio_rcar_remove(struct platform_device *pdev)
+{
+	struct gpio_rcar_priv *p = platform_get_drvdata(pdev);
+
+	gpiochip_remove(&p->gpio_chip);
+
+	pm_runtime_disable(&pdev->dev);
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int gpio_rcar_suspend(struct device *dev)
+{
+	struct gpio_rcar_priv *p = dev_get_drvdata(dev);
+
+	p->bank_info.iointsel = gpio_rcar_read(p, IOINTSEL);
+	p->bank_info.inoutsel = gpio_rcar_read(p, INOUTSEL);
+	p->bank_info.outdt = gpio_rcar_read(p, OUTDT);
+	p->bank_info.intmsk = gpio_rcar_read(p, INTMSK);
+	p->bank_info.posneg = gpio_rcar_read(p, POSNEG);
+	p->bank_info.edglevel = gpio_rcar_read(p, EDGLEVEL);
+	if (p->has_both_edge_trigger)
+		p->bank_info.bothedge = gpio_rcar_read(p, BOTHEDGE);
+
+	if (atomic_read(&p->wakeup_path))
+		device_set_wakeup_path(dev);
+
+	return 0;
+}
+
+static int gpio_rcar_resume(struct device *dev)
+{
+	struct gpio_rcar_priv *p = dev_get_drvdata(dev);
+	unsigned int offset;
+	u32 mask;
+
+	for (offset = 0; offset < p->gpio_chip.ngpio; offset++) {
+		if (!gpiochip_line_is_valid(&p->gpio_chip, offset))
+			continue;
+
+		mask = BIT(offset);
+		/* I/O pin */
+		if (!(p->bank_info.iointsel & mask)) {
+			if (p->bank_info.inoutsel & mask)
+				gpio_rcar_direction_output(
+					&p->gpio_chip, offset,
+					!!(p->bank_info.outdt & mask));
+			else
+				gpio_rcar_direction_input(&p->gpio_chip,
+							  offset);
+		} else {
+			/* Interrupt pin */
+			gpio_rcar_config_interrupt_input_mode(
+				p,
+				offset,
+				!(p->bank_info.posneg & mask),
+				!(p->bank_info.edglevel & mask),
+				!!(p->bank_info.bothedge & mask));
+
+			if (p->bank_info.intmsk & mask)
+				gpio_rcar_write(p, MSKCLR, mask);
+		}
+	}
+
+	return 0;
+}
+#endif /* CONFIG_PM_SLEEP*/
+
+static SIMPLE_DEV_PM_OPS(gpio_rcar_pm_ops, gpio_rcar_suspend, gpio_rcar_resume);
+
+static struct platform_driver gpio_rcar_device_driver = {
+	.probe		= gpio_rcar_probe,
+	.remove		= gpio_rcar_remove,
+	.driver		= {
+		.name	= "gpio_rcar",
+		.pm     = &gpio_rcar_pm_ops,
+		.of_match_table = of_match_ptr(gpio_rcar_of_table),
+	}
+};
+
+module_platform_driver(gpio_rcar_device_driver);
+
+MODULE_AUTHOR("Magnus Damm");
+MODULE_DESCRIPTION("Renesas R-Car GPIO Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-rda.c b/drivers/gpio/gpio-rda.c
new file mode 100644
index 000000000..28dcbb58b
--- /dev/null
+++ b/drivers/gpio/gpio-rda.c
@@ -0,0 +1,294 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * RDA Micro GPIO driver
+ *
+ * Copyright (C) 2012 RDA Micro Inc.
+ * Copyright (C) 2019 Manivannan Sadhasivam
+ */
+
+#include <linux/bitops.h>
+#include <linux/gpio/driver.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+
+#define RDA_GPIO_OEN_VAL		0x00
+#define RDA_GPIO_OEN_SET_OUT		0x04
+#define RDA_GPIO_OEN_SET_IN		0x08
+#define RDA_GPIO_VAL			0x0c
+#define RDA_GPIO_SET			0x10
+#define RDA_GPIO_CLR			0x14
+#define RDA_GPIO_INT_CTRL_SET		0x18
+#define RDA_GPIO_INT_CTRL_CLR		0x1c
+#define RDA_GPIO_INT_CLR		0x20
+#define RDA_GPIO_INT_STATUS		0x24
+
+#define RDA_GPIO_IRQ_RISE_SHIFT		0
+#define RDA_GPIO_IRQ_FALL_SHIFT		8
+#define RDA_GPIO_DEBOUCE_SHIFT		16
+#define RDA_GPIO_LEVEL_SHIFT		24
+
+#define RDA_GPIO_IRQ_MASK		0xff
+
+/* Each bank consists of 32 GPIOs */
+#define RDA_GPIO_BANK_NR	32
+
+struct rda_gpio {
+	struct gpio_chip chip;
+	void __iomem *base;
+	spinlock_t lock;
+	struct irq_chip irq_chip;
+	int irq;
+};
+
+static inline void rda_gpio_update(struct gpio_chip *chip, unsigned int offset,
+				   u16 reg, int val)
+{
+	struct rda_gpio *rda_gpio = gpiochip_get_data(chip);
+	void __iomem *base = rda_gpio->base;
+	unsigned long flags;
+	u32 tmp;
+
+	spin_lock_irqsave(&rda_gpio->lock, flags);
+	tmp = readl_relaxed(base + reg);
+
+	if (val)
+		tmp |= BIT(offset);
+	else
+		tmp &= ~BIT(offset);
+
+	writel_relaxed(tmp, base + reg);
+	spin_unlock_irqrestore(&rda_gpio->lock, flags);
+}
+
+static void rda_gpio_irq_mask(struct irq_data *data)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+	struct rda_gpio *rda_gpio = gpiochip_get_data(chip);
+	void __iomem *base = rda_gpio->base;
+	u32 offset = irqd_to_hwirq(data);
+	u32 value;
+
+	value = BIT(offset) << RDA_GPIO_IRQ_RISE_SHIFT;
+	value |= BIT(offset) << RDA_GPIO_IRQ_FALL_SHIFT;
+
+	writel_relaxed(value, base + RDA_GPIO_INT_CTRL_CLR);
+}
+
+static void rda_gpio_irq_ack(struct irq_data *data)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+	u32 offset = irqd_to_hwirq(data);
+
+	rda_gpio_update(chip, offset, RDA_GPIO_INT_CLR, 1);
+}
+
+static int rda_gpio_set_irq(struct gpio_chip *chip, u32 offset,
+			    unsigned int flow_type)
+{
+	struct rda_gpio *rda_gpio = gpiochip_get_data(chip);
+	void __iomem *base = rda_gpio->base;
+	u32 value;
+
+	switch (flow_type) {
+	case IRQ_TYPE_EDGE_RISING:
+		/* Set rising edge trigger */
+		value = BIT(offset) << RDA_GPIO_IRQ_RISE_SHIFT;
+		writel_relaxed(value, base + RDA_GPIO_INT_CTRL_SET);
+
+		/* Switch to edge trigger interrupt */
+		value = BIT(offset) << RDA_GPIO_LEVEL_SHIFT;
+		writel_relaxed(value, base + RDA_GPIO_INT_CTRL_CLR);
+		break;
+
+	case IRQ_TYPE_EDGE_FALLING:
+		/* Set falling edge trigger */
+		value = BIT(offset) << RDA_GPIO_IRQ_FALL_SHIFT;
+		writel_relaxed(value, base + RDA_GPIO_INT_CTRL_SET);
+
+		/* Switch to edge trigger interrupt */
+		value = BIT(offset) << RDA_GPIO_LEVEL_SHIFT;
+		writel_relaxed(value, base + RDA_GPIO_INT_CTRL_CLR);
+		break;
+
+	case IRQ_TYPE_EDGE_BOTH:
+		/* Set both edge trigger */
+		value = BIT(offset) << RDA_GPIO_IRQ_RISE_SHIFT;
+		value |= BIT(offset) << RDA_GPIO_IRQ_FALL_SHIFT;
+		writel_relaxed(value, base + RDA_GPIO_INT_CTRL_SET);
+
+		/* Switch to edge trigger interrupt */
+		value = BIT(offset) << RDA_GPIO_LEVEL_SHIFT;
+		writel_relaxed(value, base + RDA_GPIO_INT_CTRL_CLR);
+		break;
+
+	case IRQ_TYPE_LEVEL_HIGH:
+		/* Set high level trigger */
+		value = BIT(offset) << RDA_GPIO_IRQ_RISE_SHIFT;
+
+		/* Switch to level trigger interrupt */
+		value |= BIT(offset) << RDA_GPIO_LEVEL_SHIFT;
+		writel_relaxed(value, base + RDA_GPIO_INT_CTRL_SET);
+		break;
+
+	case IRQ_TYPE_LEVEL_LOW:
+		/* Set low level trigger */
+		value = BIT(offset) << RDA_GPIO_IRQ_FALL_SHIFT;
+
+		/* Switch to level trigger interrupt */
+		value |= BIT(offset) << RDA_GPIO_LEVEL_SHIFT;
+		writel_relaxed(value, base + RDA_GPIO_INT_CTRL_SET);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void rda_gpio_irq_unmask(struct irq_data *data)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+	u32 offset = irqd_to_hwirq(data);
+	u32 trigger = irqd_get_trigger_type(data);
+
+	rda_gpio_set_irq(chip, offset, trigger);
+}
+
+static int rda_gpio_irq_set_type(struct irq_data *data, unsigned int flow_type)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+	u32 offset = irqd_to_hwirq(data);
+	int ret;
+
+	ret = rda_gpio_set_irq(chip, offset, flow_type);
+	if (ret)
+		return ret;
+
+	if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
+		irq_set_handler_locked(data, handle_level_irq);
+	else if (flow_type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
+		irq_set_handler_locked(data, handle_edge_irq);
+
+	return 0;
+}
+
+static void rda_gpio_irq_handler(struct irq_desc *desc)
+{
+	struct gpio_chip *chip = irq_desc_get_handler_data(desc);
+	struct irq_chip *ic = irq_desc_get_chip(desc);
+	struct rda_gpio *rda_gpio = gpiochip_get_data(chip);
+	unsigned long status;
+	u32 n, girq;
+
+	chained_irq_enter(ic, desc);
+
+	status = readl_relaxed(rda_gpio->base + RDA_GPIO_INT_STATUS);
+	/* Only lower 8 bits are capable of generating interrupts */
+	status &= RDA_GPIO_IRQ_MASK;
+
+	for_each_set_bit(n, &status, RDA_GPIO_BANK_NR) {
+		girq = irq_find_mapping(chip->irq.domain, n);
+		generic_handle_irq(girq);
+	}
+
+	chained_irq_exit(ic, desc);
+}
+
+static int rda_gpio_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct device *dev = &pdev->dev;
+	struct gpio_irq_chip *girq;
+	struct rda_gpio *rda_gpio;
+	u32 ngpios;
+	int ret;
+
+	rda_gpio = devm_kzalloc(dev, sizeof(*rda_gpio), GFP_KERNEL);
+	if (!rda_gpio)
+		return -ENOMEM;
+
+	ret = device_property_read_u32(dev, "ngpios", &ngpios);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * Not all ports have interrupt capability. For instance, on
+	 * RDA8810PL, GPIOC doesn't support interrupt. So we must handle
+	 * those also.
+	 */
+	rda_gpio->irq = platform_get_irq(pdev, 0);
+
+	rda_gpio->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(rda_gpio->base))
+		return PTR_ERR(rda_gpio->base);
+
+	spin_lock_init(&rda_gpio->lock);
+
+	ret = bgpio_init(&rda_gpio->chip, dev, 4,
+			 rda_gpio->base + RDA_GPIO_VAL,
+			 rda_gpio->base + RDA_GPIO_SET,
+			 rda_gpio->base + RDA_GPIO_CLR,
+			 rda_gpio->base + RDA_GPIO_OEN_SET_OUT,
+			 rda_gpio->base + RDA_GPIO_OEN_SET_IN,
+			 BGPIOF_READ_OUTPUT_REG_SET);
+	if (ret) {
+		dev_err(dev, "bgpio_init failed\n");
+		return ret;
+	}
+
+	rda_gpio->chip.label = dev_name(dev);
+	rda_gpio->chip.ngpio = ngpios;
+	rda_gpio->chip.base = -1;
+	rda_gpio->chip.parent = dev;
+	rda_gpio->chip.of_node = np;
+
+	if (rda_gpio->irq >= 0) {
+		rda_gpio->irq_chip.name = "rda-gpio",
+		rda_gpio->irq_chip.irq_ack = rda_gpio_irq_ack,
+		rda_gpio->irq_chip.irq_mask = rda_gpio_irq_mask,
+		rda_gpio->irq_chip.irq_unmask = rda_gpio_irq_unmask,
+		rda_gpio->irq_chip.irq_set_type = rda_gpio_irq_set_type,
+		rda_gpio->irq_chip.flags = IRQCHIP_SKIP_SET_WAKE,
+
+		girq = &rda_gpio->chip.irq;
+		girq->chip = &rda_gpio->irq_chip;
+		girq->handler = handle_bad_irq;
+		girq->default_type = IRQ_TYPE_NONE;
+		girq->parent_handler = rda_gpio_irq_handler;
+		girq->parent_handler_data = rda_gpio;
+		girq->num_parents = 1;
+		girq->parents = devm_kcalloc(dev, 1,
+					     sizeof(*girq->parents),
+					     GFP_KERNEL);
+		if (!girq->parents)
+			return -ENOMEM;
+		girq->parents[0] = rda_gpio->irq;
+	}
+
+	platform_set_drvdata(pdev, rda_gpio);
+
+	return devm_gpiochip_add_data(dev, &rda_gpio->chip, rda_gpio);
+}
+
+static const struct of_device_id rda_gpio_of_match[] = {
+	{ .compatible = "rda,8810pl-gpio", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, rda_gpio_of_match);
+
+static struct platform_driver rda_gpio_driver = {
+	.probe = rda_gpio_probe,
+	.driver = {
+		.name = "rda-gpio",
+		.of_match_table	= rda_gpio_of_match,
+	},
+};
+
+module_platform_driver_probe(rda_gpio_driver, rda_gpio_probe);
+
+MODULE_DESCRIPTION("RDA Micro GPIO driver");
+MODULE_AUTHOR("Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-rdc321x.c b/drivers/gpio/gpio-rdc321x.c
new file mode 100644
index 000000000..01ed2517e
--- /dev/null
+++ b/drivers/gpio/gpio-rdc321x.c
@@ -0,0 +1,197 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * RDC321x GPIO driver
+ *
+ * Copyright (C) 2008, Volker Weiss <dev@tintuc.de>
+ * Copyright (C) 2007-2010 Florian Fainelli <florian@openwrt.org>
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/gpio/driver.h>
+#include <linux/mfd/rdc321x.h>
+#include <linux/slab.h>
+
+struct rdc321x_gpio {
+	spinlock_t		lock;
+	struct pci_dev		*sb_pdev;
+	u32			data_reg[2];
+	int			reg1_ctrl_base;
+	int			reg1_data_base;
+	int			reg2_ctrl_base;
+	int			reg2_data_base;
+	struct gpio_chip	chip;
+};
+
+/* read GPIO pin */
+static int rdc_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
+{
+	struct rdc321x_gpio *gpch;
+	u32 value = 0;
+	int reg;
+
+	gpch = gpiochip_get_data(chip);
+	reg = gpio < 32 ? gpch->reg1_data_base : gpch->reg2_data_base;
+
+	spin_lock(&gpch->lock);
+	pci_write_config_dword(gpch->sb_pdev, reg,
+					gpch->data_reg[gpio < 32 ? 0 : 1]);
+	pci_read_config_dword(gpch->sb_pdev, reg, &value);
+	spin_unlock(&gpch->lock);
+
+	return (1 << (gpio & 0x1f)) & value ? 1 : 0;
+}
+
+static void rdc_gpio_set_value_impl(struct gpio_chip *chip,
+				unsigned gpio, int value)
+{
+	struct rdc321x_gpio *gpch;
+	int reg = (gpio < 32) ? 0 : 1;
+
+	gpch = gpiochip_get_data(chip);
+
+	if (value)
+		gpch->data_reg[reg] |= 1 << (gpio & 0x1f);
+	else
+		gpch->data_reg[reg] &= ~(1 << (gpio & 0x1f));
+
+	pci_write_config_dword(gpch->sb_pdev,
+			reg ? gpch->reg2_data_base : gpch->reg1_data_base,
+			gpch->data_reg[reg]);
+}
+
+/* set GPIO pin to value */
+static void rdc_gpio_set_value(struct gpio_chip *chip,
+				unsigned gpio, int value)
+{
+	struct rdc321x_gpio *gpch;
+
+	gpch = gpiochip_get_data(chip);
+	spin_lock(&gpch->lock);
+	rdc_gpio_set_value_impl(chip, gpio, value);
+	spin_unlock(&gpch->lock);
+}
+
+static int rdc_gpio_config(struct gpio_chip *chip,
+				unsigned gpio, int value)
+{
+	struct rdc321x_gpio *gpch;
+	int err;
+	u32 reg;
+
+	gpch = gpiochip_get_data(chip);
+
+	spin_lock(&gpch->lock);
+	err = pci_read_config_dword(gpch->sb_pdev, gpio < 32 ?
+			gpch->reg1_ctrl_base : gpch->reg2_ctrl_base, &reg);
+	if (err)
+		goto unlock;
+
+	reg |= 1 << (gpio & 0x1f);
+
+	err = pci_write_config_dword(gpch->sb_pdev, gpio < 32 ?
+			gpch->reg1_ctrl_base : gpch->reg2_ctrl_base, reg);
+	if (err)
+		goto unlock;
+
+	rdc_gpio_set_value_impl(chip, gpio, value);
+
+unlock:
+	spin_unlock(&gpch->lock);
+
+	return err;
+}
+
+/* configure GPIO pin as input */
+static int rdc_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
+{
+	return rdc_gpio_config(chip, gpio, 1);
+}
+
+/*
+ * Cache the initial value of both GPIO data registers
+ */
+static int rdc321x_gpio_probe(struct platform_device *pdev)
+{
+	int err;
+	struct resource *r;
+	struct rdc321x_gpio *rdc321x_gpio_dev;
+	struct rdc321x_gpio_pdata *pdata;
+
+	pdata = dev_get_platdata(&pdev->dev);
+	if (!pdata) {
+		dev_err(&pdev->dev, "no platform data supplied\n");
+		return -ENODEV;
+	}
+
+	rdc321x_gpio_dev = devm_kzalloc(&pdev->dev, sizeof(struct rdc321x_gpio),
+					GFP_KERNEL);
+	if (!rdc321x_gpio_dev)
+		return -ENOMEM;
+
+	r = platform_get_resource_byname(pdev, IORESOURCE_IO, "gpio-reg1");
+	if (!r) {
+		dev_err(&pdev->dev, "failed to get gpio-reg1 resource\n");
+		return -ENODEV;
+	}
+
+	spin_lock_init(&rdc321x_gpio_dev->lock);
+	rdc321x_gpio_dev->sb_pdev = pdata->sb_pdev;
+	rdc321x_gpio_dev->reg1_ctrl_base = r->start;
+	rdc321x_gpio_dev->reg1_data_base = r->start + 0x4;
+
+	r = platform_get_resource_byname(pdev, IORESOURCE_IO, "gpio-reg2");
+	if (!r) {
+		dev_err(&pdev->dev, "failed to get gpio-reg2 resource\n");
+		return -ENODEV;
+	}
+
+	rdc321x_gpio_dev->reg2_ctrl_base = r->start;
+	rdc321x_gpio_dev->reg2_data_base = r->start + 0x4;
+
+	rdc321x_gpio_dev->chip.label = "rdc321x-gpio";
+	rdc321x_gpio_dev->chip.owner = THIS_MODULE;
+	rdc321x_gpio_dev->chip.direction_input = rdc_gpio_direction_input;
+	rdc321x_gpio_dev->chip.direction_output = rdc_gpio_config;
+	rdc321x_gpio_dev->chip.get = rdc_gpio_get_value;
+	rdc321x_gpio_dev->chip.set = rdc_gpio_set_value;
+	rdc321x_gpio_dev->chip.base = 0;
+	rdc321x_gpio_dev->chip.ngpio = pdata->max_gpios;
+
+	platform_set_drvdata(pdev, rdc321x_gpio_dev);
+
+	/* This might not be, what others (BIOS, bootloader, etc.)
+	   wrote to these registers before, but it's a good guess. Still
+	   better than just using 0xffffffff. */
+	err = pci_read_config_dword(rdc321x_gpio_dev->sb_pdev,
+					rdc321x_gpio_dev->reg1_data_base,
+					&rdc321x_gpio_dev->data_reg[0]);
+	if (err)
+		return err;
+
+	err = pci_read_config_dword(rdc321x_gpio_dev->sb_pdev,
+					rdc321x_gpio_dev->reg2_data_base,
+					&rdc321x_gpio_dev->data_reg[1]);
+	if (err)
+		return err;
+
+	dev_info(&pdev->dev, "registering %d GPIOs\n",
+					rdc321x_gpio_dev->chip.ngpio);
+	return devm_gpiochip_add_data(&pdev->dev, &rdc321x_gpio_dev->chip,
+				      rdc321x_gpio_dev);
+}
+
+static struct platform_driver rdc321x_gpio_driver = {
+	.driver.name	= "rdc321x-gpio",
+	.probe		= rdc321x_gpio_probe,
+};
+
+module_platform_driver(rdc321x_gpio_driver);
+
+MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
+MODULE_DESCRIPTION("RDC321x GPIO driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:rdc321x-gpio");
diff --git a/drivers/gpio/gpio-reg.c b/drivers/gpio/gpio-reg.c
new file mode 100644
index 000000000..d35169bde
--- /dev/null
+++ b/drivers/gpio/gpio-reg.c
@@ -0,0 +1,183 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * gpio-reg: single register individually fixed-direction GPIOs
+ *
+ * Copyright (C) 2016 Russell King
+ */
+#include <linux/gpio/driver.h>
+#include <linux/gpio/gpio-reg.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+struct gpio_reg {
+	struct gpio_chip gc;
+	spinlock_t lock;
+	u32 direction;
+	u32 out;
+	void __iomem *reg;
+	struct irq_domain *irqdomain;
+	const int *irqs;
+};
+
+#define to_gpio_reg(x) container_of(x, struct gpio_reg, gc)
+
+static int gpio_reg_get_direction(struct gpio_chip *gc, unsigned offset)
+{
+	struct gpio_reg *r = to_gpio_reg(gc);
+
+	return r->direction & BIT(offset) ? GPIO_LINE_DIRECTION_IN :
+					    GPIO_LINE_DIRECTION_OUT;
+}
+
+static int gpio_reg_direction_output(struct gpio_chip *gc, unsigned offset,
+	int value)
+{
+	struct gpio_reg *r = to_gpio_reg(gc);
+
+	if (r->direction & BIT(offset))
+		return -ENOTSUPP;
+
+	gc->set(gc, offset, value);
+	return 0;
+}
+
+static int gpio_reg_direction_input(struct gpio_chip *gc, unsigned offset)
+{
+	struct gpio_reg *r = to_gpio_reg(gc);
+
+	return r->direction & BIT(offset) ? 0 : -ENOTSUPP;
+}
+
+static void gpio_reg_set(struct gpio_chip *gc, unsigned offset, int value)
+{
+	struct gpio_reg *r = to_gpio_reg(gc);
+	unsigned long flags;
+	u32 val, mask = BIT(offset);
+
+	spin_lock_irqsave(&r->lock, flags);
+	val = r->out;
+	if (value)
+		val |= mask;
+	else
+		val &= ~mask;
+	r->out = val;
+	writel_relaxed(val, r->reg);
+	spin_unlock_irqrestore(&r->lock, flags);
+}
+
+static int gpio_reg_get(struct gpio_chip *gc, unsigned offset)
+{
+	struct gpio_reg *r = to_gpio_reg(gc);
+	u32 val, mask = BIT(offset);
+
+	if (r->direction & mask) {
+		/*
+		 * double-read the value, some registers latch after the
+		 * first read.
+		 */
+		readl_relaxed(r->reg);
+		val = readl_relaxed(r->reg);
+	} else {
+		val = r->out;
+	}
+	return !!(val & mask);
+}
+
+static void gpio_reg_set_multiple(struct gpio_chip *gc, unsigned long *mask,
+	unsigned long *bits)
+{
+	struct gpio_reg *r = to_gpio_reg(gc);
+	unsigned long flags;
+
+	spin_lock_irqsave(&r->lock, flags);
+	r->out = (r->out & ~*mask) | (*bits & *mask);
+	writel_relaxed(r->out, r->reg);
+	spin_unlock_irqrestore(&r->lock, flags);
+}
+
+static int gpio_reg_to_irq(struct gpio_chip *gc, unsigned offset)
+{
+	struct gpio_reg *r = to_gpio_reg(gc);
+	int irq = r->irqs[offset];
+
+	if (irq >= 0 && r->irqdomain)
+		irq = irq_find_mapping(r->irqdomain, irq);
+
+	return irq;
+}
+
+/**
+ * gpio_reg_init - add a fixed in/out register as gpio
+ * @dev: optional struct device associated with this register
+ * @base: start gpio number, or -1 to allocate
+ * @num: number of GPIOs, maximum 32
+ * @label: GPIO chip label
+ * @direction: bitmask of fixed direction, one per GPIO signal, 1 = in
+ * @def_out: initial GPIO output value
+ * @names: array of %num strings describing each GPIO signal or %NULL
+ * @irqdom: irq domain or %NULL
+ * @irqs: array of %num ints describing the interrupt mapping for each
+ *        GPIO signal, or %NULL.  If @irqdom is %NULL, then this
+ *        describes the Linux interrupt number, otherwise it describes
+ *        the hardware interrupt number in the specified irq domain.
+ *
+ * Add a single-register GPIO device containing up to 32 GPIO signals,
+ * where each GPIO has a fixed input or output configuration.  Only
+ * input GPIOs are assumed to be readable from the register, and only
+ * then after a double-read.  Output values are assumed not to be
+ * readable.
+ */
+struct gpio_chip *gpio_reg_init(struct device *dev, void __iomem *reg,
+	int base, int num, const char *label, u32 direction, u32 def_out,
+	const char *const *names, struct irq_domain *irqdom, const int *irqs)
+{
+	struct gpio_reg *r;
+	int ret;
+
+	if (dev)
+		r = devm_kzalloc(dev, sizeof(*r), GFP_KERNEL);
+	else
+		r = kzalloc(sizeof(*r), GFP_KERNEL);
+
+	if (!r)
+		return ERR_PTR(-ENOMEM);
+
+	spin_lock_init(&r->lock);
+
+	r->gc.label = label;
+	r->gc.get_direction = gpio_reg_get_direction;
+	r->gc.direction_input = gpio_reg_direction_input;
+	r->gc.direction_output = gpio_reg_direction_output;
+	r->gc.set = gpio_reg_set;
+	r->gc.get = gpio_reg_get;
+	r->gc.set_multiple = gpio_reg_set_multiple;
+	if (irqs)
+		r->gc.to_irq = gpio_reg_to_irq;
+	r->gc.base = base;
+	r->gc.ngpio = num;
+	r->gc.names = names;
+	r->direction = direction;
+	r->out = def_out;
+	r->reg = reg;
+	r->irqs = irqs;
+
+	if (dev)
+		ret = devm_gpiochip_add_data(dev, &r->gc, r);
+	else
+		ret = gpiochip_add_data(&r->gc, r);
+
+	return ret ? ERR_PTR(ret) : &r->gc;
+}
+
+int gpio_reg_resume(struct gpio_chip *gc)
+{
+	struct gpio_reg *r = to_gpio_reg(gc);
+	unsigned long flags;
+
+	spin_lock_irqsave(&r->lock, flags);
+	writel_relaxed(r->out, r->reg);
+	spin_unlock_irqrestore(&r->lock, flags);
+
+	return 0;
+}
diff --git a/drivers/gpio/gpio-regmap.c b/drivers/gpio/gpio-regmap.c
new file mode 100644
index 000000000..5412cb3b0
--- /dev/null
+++ b/drivers/gpio/gpio-regmap.c
@@ -0,0 +1,349 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * regmap based generic GPIO driver
+ *
+ * Copyright 2020 Michael Walle <michael@walle.cc>
+ */
+
+#include <linux/gpio/driver.h>
+#include <linux/gpio/regmap.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+struct gpio_regmap {
+	struct device *parent;
+	struct regmap *regmap;
+	struct gpio_chip gpio_chip;
+
+	int reg_stride;
+	int ngpio_per_reg;
+	unsigned int reg_dat_base;
+	unsigned int reg_set_base;
+	unsigned int reg_clr_base;
+	unsigned int reg_dir_in_base;
+	unsigned int reg_dir_out_base;
+
+	int (*reg_mask_xlate)(struct gpio_regmap *gpio, unsigned int base,
+			      unsigned int offset, unsigned int *reg,
+			      unsigned int *mask);
+
+	void *driver_data;
+};
+
+static unsigned int gpio_regmap_addr(unsigned int addr)
+{
+	if (addr == GPIO_REGMAP_ADDR_ZERO)
+		return 0;
+
+	return addr;
+}
+
+static int gpio_regmap_simple_xlate(struct gpio_regmap *gpio,
+				    unsigned int base, unsigned int offset,
+				    unsigned int *reg, unsigned int *mask)
+{
+	unsigned int line = offset % gpio->ngpio_per_reg;
+	unsigned int stride = offset / gpio->ngpio_per_reg;
+
+	*reg = base + stride * gpio->reg_stride;
+	*mask = BIT(line);
+
+	return 0;
+}
+
+static int gpio_regmap_get(struct gpio_chip *chip, unsigned int offset)
+{
+	struct gpio_regmap *gpio = gpiochip_get_data(chip);
+	unsigned int base, val, reg, mask;
+	int ret;
+
+	/* we might not have an output register if we are input only */
+	if (gpio->reg_dat_base)
+		base = gpio_regmap_addr(gpio->reg_dat_base);
+	else
+		base = gpio_regmap_addr(gpio->reg_set_base);
+
+	ret = gpio->reg_mask_xlate(gpio, base, offset, &reg, &mask);
+	if (ret)
+		return ret;
+
+	ret = regmap_read(gpio->regmap, reg, &val);
+	if (ret)
+		return ret;
+
+	return !!(val & mask);
+}
+
+static void gpio_regmap_set(struct gpio_chip *chip, unsigned int offset,
+			    int val)
+{
+	struct gpio_regmap *gpio = gpiochip_get_data(chip);
+	unsigned int base = gpio_regmap_addr(gpio->reg_set_base);
+	unsigned int reg, mask;
+
+	gpio->reg_mask_xlate(gpio, base, offset, &reg, &mask);
+	if (val)
+		regmap_update_bits(gpio->regmap, reg, mask, mask);
+	else
+		regmap_update_bits(gpio->regmap, reg, mask, 0);
+}
+
+static void gpio_regmap_set_with_clear(struct gpio_chip *chip,
+				       unsigned int offset, int val)
+{
+	struct gpio_regmap *gpio = gpiochip_get_data(chip);
+	unsigned int base, reg, mask;
+
+	if (val)
+		base = gpio_regmap_addr(gpio->reg_set_base);
+	else
+		base = gpio_regmap_addr(gpio->reg_clr_base);
+
+	gpio->reg_mask_xlate(gpio, base, offset, &reg, &mask);
+	regmap_write(gpio->regmap, reg, mask);
+}
+
+static int gpio_regmap_get_direction(struct gpio_chip *chip,
+				     unsigned int offset)
+{
+	struct gpio_regmap *gpio = gpiochip_get_data(chip);
+	unsigned int base, val, reg, mask;
+	int invert, ret;
+
+	if (gpio->reg_dir_out_base) {
+		base = gpio_regmap_addr(gpio->reg_dir_out_base);
+		invert = 0;
+	} else if (gpio->reg_dir_in_base) {
+		base = gpio_regmap_addr(gpio->reg_dir_in_base);
+		invert = 1;
+	} else {
+		return -EOPNOTSUPP;
+	}
+
+	ret = gpio->reg_mask_xlate(gpio, base, offset, &reg, &mask);
+	if (ret)
+		return ret;
+
+	ret = regmap_read(gpio->regmap, reg, &val);
+	if (ret)
+		return ret;
+
+	if (!!(val & mask) ^ invert)
+		return GPIO_LINE_DIRECTION_OUT;
+	else
+		return GPIO_LINE_DIRECTION_IN;
+}
+
+static int gpio_regmap_set_direction(struct gpio_chip *chip,
+				     unsigned int offset, bool output)
+{
+	struct gpio_regmap *gpio = gpiochip_get_data(chip);
+	unsigned int base, val, reg, mask;
+	int invert, ret;
+
+	if (gpio->reg_dir_out_base) {
+		base = gpio_regmap_addr(gpio->reg_dir_out_base);
+		invert = 0;
+	} else if (gpio->reg_dir_in_base) {
+		base = gpio_regmap_addr(gpio->reg_dir_in_base);
+		invert = 1;
+	} else {
+		return -EOPNOTSUPP;
+	}
+
+	ret = gpio->reg_mask_xlate(gpio, base, offset, &reg, &mask);
+	if (ret)
+		return ret;
+
+	if (invert)
+		val = output ? 0 : mask;
+	else
+		val = output ? mask : 0;
+
+	return regmap_update_bits(gpio->regmap, reg, mask, val);
+}
+
+static int gpio_regmap_direction_input(struct gpio_chip *chip,
+				       unsigned int offset)
+{
+	return gpio_regmap_set_direction(chip, offset, false);
+}
+
+static int gpio_regmap_direction_output(struct gpio_chip *chip,
+					unsigned int offset, int value)
+{
+	gpio_regmap_set(chip, offset, value);
+
+	return gpio_regmap_set_direction(chip, offset, true);
+}
+
+void gpio_regmap_set_drvdata(struct gpio_regmap *gpio, void *data)
+{
+	gpio->driver_data = data;
+}
+EXPORT_SYMBOL_GPL(gpio_regmap_set_drvdata);
+
+void *gpio_regmap_get_drvdata(struct gpio_regmap *gpio)
+{
+	return gpio->driver_data;
+}
+EXPORT_SYMBOL_GPL(gpio_regmap_get_drvdata);
+
+/**
+ * gpio_regmap_register() - Register a generic regmap GPIO controller
+ * @config: configuration for gpio_regmap
+ *
+ * Return: A pointer to the registered gpio_regmap or ERR_PTR error value.
+ */
+struct gpio_regmap *gpio_regmap_register(const struct gpio_regmap_config *config)
+{
+	struct gpio_regmap *gpio;
+	struct gpio_chip *chip;
+	int ret;
+
+	if (!config->parent)
+		return ERR_PTR(-EINVAL);
+
+	if (!config->ngpio)
+		return ERR_PTR(-EINVAL);
+
+	/* we need at least one */
+	if (!config->reg_dat_base && !config->reg_set_base)
+		return ERR_PTR(-EINVAL);
+
+	/* if we have a direction register we need both input and output */
+	if ((config->reg_dir_out_base || config->reg_dir_in_base) &&
+	    (!config->reg_dat_base || !config->reg_set_base))
+		return ERR_PTR(-EINVAL);
+
+	/* we don't support having both registers simultaneously for now */
+	if (config->reg_dir_out_base && config->reg_dir_in_base)
+		return ERR_PTR(-EINVAL);
+
+	gpio = kzalloc(sizeof(*gpio), GFP_KERNEL);
+	if (!gpio)
+		return ERR_PTR(-ENOMEM);
+
+	gpio->parent = config->parent;
+	gpio->regmap = config->regmap;
+	gpio->ngpio_per_reg = config->ngpio_per_reg;
+	gpio->reg_stride = config->reg_stride;
+	gpio->reg_mask_xlate = config->reg_mask_xlate;
+	gpio->reg_dat_base = config->reg_dat_base;
+	gpio->reg_set_base = config->reg_set_base;
+	gpio->reg_clr_base = config->reg_clr_base;
+	gpio->reg_dir_in_base = config->reg_dir_in_base;
+	gpio->reg_dir_out_base = config->reg_dir_out_base;
+
+	/* if not set, assume there is only one register */
+	if (!gpio->ngpio_per_reg)
+		gpio->ngpio_per_reg = config->ngpio;
+
+	/* if not set, assume they are consecutive */
+	if (!gpio->reg_stride)
+		gpio->reg_stride = 1;
+
+	if (!gpio->reg_mask_xlate)
+		gpio->reg_mask_xlate = gpio_regmap_simple_xlate;
+
+	chip = &gpio->gpio_chip;
+	chip->parent = config->parent;
+	chip->base = -1;
+	chip->ngpio = config->ngpio;
+	chip->names = config->names;
+	chip->label = config->label ?: dev_name(config->parent);
+
+	/*
+	 * If our regmap is fast_io we should probably set can_sleep to false.
+	 * Right now, the regmap doesn't save this property, nor is there any
+	 * access function for it.
+	 * The only regmap type which uses fast_io is regmap-mmio. For now,
+	 * assume a safe default of true here.
+	 */
+	chip->can_sleep = true;
+
+	chip->get = gpio_regmap_get;
+	if (gpio->reg_set_base && gpio->reg_clr_base)
+		chip->set = gpio_regmap_set_with_clear;
+	else if (gpio->reg_set_base)
+		chip->set = gpio_regmap_set;
+
+	if (gpio->reg_dir_in_base || gpio->reg_dir_out_base) {
+		chip->get_direction = gpio_regmap_get_direction;
+		chip->direction_input = gpio_regmap_direction_input;
+		chip->direction_output = gpio_regmap_direction_output;
+	}
+
+	ret = gpiochip_add_data(chip, gpio);
+	if (ret < 0)
+		goto err_free_gpio;
+
+	if (config->irq_domain) {
+		ret = gpiochip_irqchip_add_domain(chip, config->irq_domain);
+		if (ret)
+			goto err_remove_gpiochip;
+	}
+
+	return gpio;
+
+err_remove_gpiochip:
+	gpiochip_remove(chip);
+err_free_gpio:
+	kfree(gpio);
+	return ERR_PTR(ret);
+}
+EXPORT_SYMBOL_GPL(gpio_regmap_register);
+
+/**
+ * gpio_regmap_unregister() - Unregister a generic regmap GPIO controller
+ * @gpio: gpio_regmap device to unregister
+ */
+void gpio_regmap_unregister(struct gpio_regmap *gpio)
+{
+	gpiochip_remove(&gpio->gpio_chip);
+	kfree(gpio);
+}
+EXPORT_SYMBOL_GPL(gpio_regmap_unregister);
+
+static void devm_gpio_regmap_unregister(struct device *dev, void *res)
+{
+	gpio_regmap_unregister(*(struct gpio_regmap **)res);
+}
+
+/**
+ * devm_gpio_regmap_register() - resource managed gpio_regmap_register()
+ * @dev: device that is registering this GPIO device
+ * @config: configuration for gpio_regmap
+ *
+ * Managed gpio_regmap_register(). For generic regmap GPIO device registered by
+ * this function, gpio_regmap_unregister() is automatically called on driver
+ * detach. See gpio_regmap_register() for more information.
+ *
+ * Return: A pointer to the registered gpio_regmap or ERR_PTR error value.
+ */
+struct gpio_regmap *devm_gpio_regmap_register(struct device *dev,
+					      const struct gpio_regmap_config *config)
+{
+	struct gpio_regmap **ptr, *gpio;
+
+	ptr = devres_alloc(devm_gpio_regmap_unregister, sizeof(*ptr),
+			   GFP_KERNEL);
+	if (!ptr)
+		return ERR_PTR(-ENOMEM);
+
+	gpio = gpio_regmap_register(config);
+	if (!IS_ERR(gpio)) {
+		*ptr = gpio;
+		devres_add(dev, ptr);
+	} else {
+		devres_free(ptr);
+	}
+
+	return gpio;
+}
+EXPORT_SYMBOL_GPL(devm_gpio_regmap_register);
+
+MODULE_AUTHOR("Michael Walle <michael@walle.cc>");
+MODULE_DESCRIPTION("GPIO generic regmap driver core");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/gpio-sa1100.c b/drivers/gpio/gpio-sa1100.c
new file mode 100644
index 000000000..edff5e814
--- /dev/null
+++ b/drivers/gpio/gpio-sa1100.c
@@ -0,0 +1,328 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * linux/arch/arm/mach-sa1100/gpio.c
+ *
+ * Generic SA-1100 GPIO handling
+ */
+#include <linux/gpio/driver.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/syscore_ops.h>
+#include <soc/sa1100/pwer.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
+struct sa1100_gpio_chip {
+	struct gpio_chip chip;
+	void __iomem *membase;
+	int irqbase;
+	u32 irqmask;
+	u32 irqrising;
+	u32 irqfalling;
+	u32 irqwake;
+};
+
+#define sa1100_gpio_chip(x) container_of(x, struct sa1100_gpio_chip, chip)
+
+enum {
+	R_GPLR = 0x00,
+	R_GPDR = 0x04,
+	R_GPSR = 0x08,
+	R_GPCR = 0x0c,
+	R_GRER = 0x10,
+	R_GFER = 0x14,
+	R_GEDR = 0x18,
+	R_GAFR = 0x1c,
+};
+
+static int sa1100_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	return readl_relaxed(sa1100_gpio_chip(chip)->membase + R_GPLR) &
+		BIT(offset);
+}
+
+static void sa1100_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	int reg = value ? R_GPSR : R_GPCR;
+
+	writel_relaxed(BIT(offset), sa1100_gpio_chip(chip)->membase + reg);
+}
+
+static int sa1100_get_direction(struct gpio_chip *chip, unsigned offset)
+{
+	void __iomem *gpdr = sa1100_gpio_chip(chip)->membase + R_GPDR;
+
+	if (readl_relaxed(gpdr) & BIT(offset))
+		return GPIO_LINE_DIRECTION_OUT;
+
+	return GPIO_LINE_DIRECTION_IN;
+}
+
+static int sa1100_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	void __iomem *gpdr = sa1100_gpio_chip(chip)->membase + R_GPDR;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	writel_relaxed(readl_relaxed(gpdr) & ~BIT(offset), gpdr);
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+static int sa1100_direction_output(struct gpio_chip *chip, unsigned offset, int value)
+{
+	void __iomem *gpdr = sa1100_gpio_chip(chip)->membase + R_GPDR;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	sa1100_gpio_set(chip, offset, value);
+	writel_relaxed(readl_relaxed(gpdr) | BIT(offset), gpdr);
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+static int sa1100_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	return sa1100_gpio_chip(chip)->irqbase + offset;
+}
+
+static struct sa1100_gpio_chip sa1100_gpio_chip = {
+	.chip = {
+		.label			= "gpio",
+		.get_direction		= sa1100_get_direction,
+		.direction_input	= sa1100_direction_input,
+		.direction_output	= sa1100_direction_output,
+		.set			= sa1100_gpio_set,
+		.get			= sa1100_gpio_get,
+		.to_irq			= sa1100_to_irq,
+		.base			= 0,
+		.ngpio			= GPIO_MAX + 1,
+	},
+	.membase = (void *)&GPLR,
+	.irqbase = IRQ_GPIO0,
+};
+
+/*
+ * SA1100 GPIO edge detection for IRQs:
+ * IRQs are generated on Falling-Edge, Rising-Edge, or both.
+ * Use this instead of directly setting GRER/GFER.
+ */
+static void sa1100_update_edge_regs(struct sa1100_gpio_chip *sgc)
+{
+	void *base = sgc->membase;
+	u32 grer, gfer;
+
+	grer = sgc->irqrising & sgc->irqmask;
+	gfer = sgc->irqfalling & sgc->irqmask;
+
+	writel_relaxed(grer, base + R_GRER);
+	writel_relaxed(gfer, base + R_GFER);
+}
+
+static int sa1100_gpio_type(struct irq_data *d, unsigned int type)
+{
+	struct sa1100_gpio_chip *sgc = irq_data_get_irq_chip_data(d);
+	unsigned int mask = BIT(d->hwirq);
+
+	if (type == IRQ_TYPE_PROBE) {
+		if ((sgc->irqrising | sgc->irqfalling) & mask)
+			return 0;
+		type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
+	}
+
+	if (type & IRQ_TYPE_EDGE_RISING)
+		sgc->irqrising |= mask;
+	else
+		sgc->irqrising &= ~mask;
+	if (type & IRQ_TYPE_EDGE_FALLING)
+		sgc->irqfalling |= mask;
+	else
+		sgc->irqfalling &= ~mask;
+
+	sa1100_update_edge_regs(sgc);
+
+	return 0;
+}
+
+/*
+ * GPIO IRQs must be acknowledged.
+ */
+static void sa1100_gpio_ack(struct irq_data *d)
+{
+	struct sa1100_gpio_chip *sgc = irq_data_get_irq_chip_data(d);
+
+	writel_relaxed(BIT(d->hwirq), sgc->membase + R_GEDR);
+}
+
+static void sa1100_gpio_mask(struct irq_data *d)
+{
+	struct sa1100_gpio_chip *sgc = irq_data_get_irq_chip_data(d);
+	unsigned int mask = BIT(d->hwirq);
+
+	sgc->irqmask &= ~mask;
+
+	sa1100_update_edge_regs(sgc);
+}
+
+static void sa1100_gpio_unmask(struct irq_data *d)
+{
+	struct sa1100_gpio_chip *sgc = irq_data_get_irq_chip_data(d);
+	unsigned int mask = BIT(d->hwirq);
+
+	sgc->irqmask |= mask;
+
+	sa1100_update_edge_regs(sgc);
+}
+
+static int sa1100_gpio_wake(struct irq_data *d, unsigned int on)
+{
+	struct sa1100_gpio_chip *sgc = irq_data_get_irq_chip_data(d);
+	int ret = sa11x0_gpio_set_wake(d->hwirq, on);
+	if (!ret) {
+		if (on)
+			sgc->irqwake |= BIT(d->hwirq);
+		else
+			sgc->irqwake &= ~BIT(d->hwirq);
+	}
+	return ret;
+}
+
+/*
+ * This is for GPIO IRQs
+ */
+static struct irq_chip sa1100_gpio_irq_chip = {
+	.name		= "GPIO",
+	.irq_ack	= sa1100_gpio_ack,
+	.irq_mask	= sa1100_gpio_mask,
+	.irq_unmask	= sa1100_gpio_unmask,
+	.irq_set_type	= sa1100_gpio_type,
+	.irq_set_wake	= sa1100_gpio_wake,
+};
+
+static int sa1100_gpio_irqdomain_map(struct irq_domain *d,
+		unsigned int irq, irq_hw_number_t hwirq)
+{
+	struct sa1100_gpio_chip *sgc = d->host_data;
+
+	irq_set_chip_data(irq, sgc);
+	irq_set_chip_and_handler(irq, &sa1100_gpio_irq_chip, handle_edge_irq);
+	irq_set_probe(irq);
+
+	return 0;
+}
+
+static const struct irq_domain_ops sa1100_gpio_irqdomain_ops = {
+	.map = sa1100_gpio_irqdomain_map,
+	.xlate = irq_domain_xlate_onetwocell,
+};
+
+static struct irq_domain *sa1100_gpio_irqdomain;
+
+/*
+ * IRQ 0-11 (GPIO) handler.  We enter here with the
+ * irq_controller_lock held, and IRQs disabled.  Decode the IRQ
+ * and call the handler.
+ */
+static void sa1100_gpio_handler(struct irq_desc *desc)
+{
+	struct sa1100_gpio_chip *sgc = irq_desc_get_handler_data(desc);
+	unsigned int irq, mask;
+	void __iomem *gedr = sgc->membase + R_GEDR;
+
+	mask = readl_relaxed(gedr);
+	do {
+		/*
+		 * clear down all currently active IRQ sources.
+		 * We will be processing them all.
+		 */
+		writel_relaxed(mask, gedr);
+
+		irq = sgc->irqbase;
+		do {
+			if (mask & 1)
+				generic_handle_irq(irq);
+			mask >>= 1;
+			irq++;
+		} while (mask);
+
+		mask = readl_relaxed(gedr);
+	} while (mask);
+}
+
+static int sa1100_gpio_suspend(void)
+{
+	struct sa1100_gpio_chip *sgc = &sa1100_gpio_chip;
+
+	/*
+	 * Set the appropriate edges for wakeup.
+	 */
+	writel_relaxed(sgc->irqwake & sgc->irqrising, sgc->membase + R_GRER);
+	writel_relaxed(sgc->irqwake & sgc->irqfalling, sgc->membase + R_GFER);
+
+	/*
+	 * Clear any pending GPIO interrupts.
+	 */
+	writel_relaxed(readl_relaxed(sgc->membase + R_GEDR),
+		       sgc->membase + R_GEDR);
+
+	return 0;
+}
+
+static void sa1100_gpio_resume(void)
+{
+	sa1100_update_edge_regs(&sa1100_gpio_chip);
+}
+
+static struct syscore_ops sa1100_gpio_syscore_ops = {
+	.suspend	= sa1100_gpio_suspend,
+	.resume		= sa1100_gpio_resume,
+};
+
+static int __init sa1100_gpio_init_devicefs(void)
+{
+	register_syscore_ops(&sa1100_gpio_syscore_ops);
+	return 0;
+}
+
+device_initcall(sa1100_gpio_init_devicefs);
+
+static const int sa1100_gpio_irqs[] __initconst = {
+	/* Install handlers for GPIO 0-10 edge detect interrupts */
+	IRQ_GPIO0_SC,
+	IRQ_GPIO1_SC,
+	IRQ_GPIO2_SC,
+	IRQ_GPIO3_SC,
+	IRQ_GPIO4_SC,
+	IRQ_GPIO5_SC,
+	IRQ_GPIO6_SC,
+	IRQ_GPIO7_SC,
+	IRQ_GPIO8_SC,
+	IRQ_GPIO9_SC,
+	IRQ_GPIO10_SC,
+	/* Install handler for GPIO 11-27 edge detect interrupts */
+	IRQ_GPIO11_27,
+};
+
+void __init sa1100_init_gpio(void)
+{
+	struct sa1100_gpio_chip *sgc = &sa1100_gpio_chip;
+	int i;
+
+	/* clear all GPIO edge detects */
+	writel_relaxed(0, sgc->membase + R_GFER);
+	writel_relaxed(0, sgc->membase + R_GRER);
+	writel_relaxed(-1, sgc->membase + R_GEDR);
+
+	gpiochip_add_data(&sa1100_gpio_chip.chip, NULL);
+
+	sa1100_gpio_irqdomain = irq_domain_add_simple(NULL,
+			28, IRQ_GPIO0,
+			&sa1100_gpio_irqdomain_ops, sgc);
+
+	for (i = 0; i < ARRAY_SIZE(sa1100_gpio_irqs); i++)
+		irq_set_chained_handler_and_data(sa1100_gpio_irqs[i],
+						 sa1100_gpio_handler, sgc);
+}
diff --git a/drivers/gpio/gpio-sama5d2-piobu.c b/drivers/gpio/gpio-sama5d2-piobu.c
new file mode 100644
index 000000000..b7c950658
--- /dev/null
+++ b/drivers/gpio/gpio-sama5d2-piobu.c
@@ -0,0 +1,249 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SAMA5D2 PIOBU GPIO controller
+ *
+ * Copyright (C) 2018 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Andrei Stefanescu <andrei.stefanescu@microchip.com>
+ *
+ */
+#include <linux/bits.h>
+#include <linux/gpio/driver.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define PIOBU_NUM 8
+#define PIOBU_REG_SIZE 4
+
+/*
+ * backup mode protection register for tamper detection
+ * normal mode protection register for tamper detection
+ * wakeup signal generation
+ */
+#define PIOBU_BMPR 0x7C
+#define PIOBU_NMPR 0x80
+#define PIOBU_WKPR 0x90
+
+#define PIOBU_BASE 0x18 /* PIOBU offset from SECUMOD base register address. */
+
+#define PIOBU_DET_OFFSET 16
+
+/* In the datasheet this bit is called OUTPUT */
+#define PIOBU_DIRECTION BIT(8)
+#define PIOBU_OUT BIT(8)
+#define PIOBU_IN 0
+
+#define PIOBU_SOD BIT(9)
+#define PIOBU_PDS BIT(10)
+
+#define PIOBU_HIGH BIT(9)
+#define PIOBU_LOW 0
+
+struct sama5d2_piobu {
+	struct gpio_chip chip;
+	struct regmap *regmap;
+};
+
+/*
+ * sama5d2_piobu_setup_pin() - prepares a pin for set_direction call
+ *
+ * Do not consider pin for tamper detection (normal and backup modes)
+ * Do not consider pin as tamper wakeup interrupt source
+ */
+static int sama5d2_piobu_setup_pin(struct gpio_chip *chip, unsigned int pin)
+{
+	int ret;
+	struct sama5d2_piobu *piobu = container_of(chip, struct sama5d2_piobu,
+						   chip);
+	unsigned int mask = BIT(PIOBU_DET_OFFSET + pin);
+
+	ret = regmap_update_bits(piobu->regmap, PIOBU_BMPR, mask, 0);
+	if (ret)
+		return ret;
+
+	ret = regmap_update_bits(piobu->regmap, PIOBU_NMPR, mask, 0);
+	if (ret)
+		return ret;
+
+	return regmap_update_bits(piobu->regmap, PIOBU_WKPR, mask, 0);
+}
+
+/*
+ * sama5d2_piobu_write_value() - writes value & mask at the pin's PIOBU register
+ */
+static int sama5d2_piobu_write_value(struct gpio_chip *chip, unsigned int pin,
+				     unsigned int mask, unsigned int value)
+{
+	int reg;
+	struct sama5d2_piobu *piobu = container_of(chip, struct sama5d2_piobu,
+						   chip);
+
+	reg = PIOBU_BASE + pin * PIOBU_REG_SIZE;
+
+	return regmap_update_bits(piobu->regmap, reg, mask, value);
+}
+
+/*
+ * sama5d2_piobu_read_value() - read the value with masking from the pin's PIOBU
+ *			      register
+ */
+static int sama5d2_piobu_read_value(struct gpio_chip *chip, unsigned int pin,
+				    unsigned int mask)
+{
+	struct sama5d2_piobu *piobu = container_of(chip, struct sama5d2_piobu,
+						   chip);
+	unsigned int val, reg;
+	int ret;
+
+	reg = PIOBU_BASE + pin * PIOBU_REG_SIZE;
+	ret = regmap_read(piobu->regmap, reg, &val);
+	if (ret < 0)
+		return ret;
+
+	return val & mask;
+}
+
+/*
+ * sama5d2_piobu_get_direction() - gpiochip get_direction
+ */
+static int sama5d2_piobu_get_direction(struct gpio_chip *chip,
+				       unsigned int pin)
+{
+	int ret = sama5d2_piobu_read_value(chip, pin, PIOBU_DIRECTION);
+
+	if (ret < 0)
+		return ret;
+
+	return (ret == PIOBU_IN) ? GPIO_LINE_DIRECTION_IN :
+				   GPIO_LINE_DIRECTION_OUT;
+}
+
+/*
+ * sama5d2_piobu_direction_input() - gpiochip direction_input
+ */
+static int sama5d2_piobu_direction_input(struct gpio_chip *chip,
+					 unsigned int pin)
+{
+	return sama5d2_piobu_write_value(chip, pin, PIOBU_DIRECTION, PIOBU_IN);
+}
+
+/*
+ * sama5d2_piobu_direction_output() - gpiochip direction_output
+ */
+static int sama5d2_piobu_direction_output(struct gpio_chip *chip,
+					  unsigned int pin, int value)
+{
+	unsigned int val = PIOBU_OUT;
+
+	if (value)
+		val |= PIOBU_HIGH;
+
+	return sama5d2_piobu_write_value(chip, pin, PIOBU_DIRECTION | PIOBU_SOD,
+					 val);
+}
+
+/*
+ * sama5d2_piobu_get() - gpiochip get
+ */
+static int sama5d2_piobu_get(struct gpio_chip *chip, unsigned int pin)
+{
+	/* if pin is input, read value from PDS else read from SOD */
+	int ret = sama5d2_piobu_get_direction(chip, pin);
+
+	if (ret == GPIO_LINE_DIRECTION_IN)
+		ret = sama5d2_piobu_read_value(chip, pin, PIOBU_PDS);
+	else if (ret == GPIO_LINE_DIRECTION_OUT)
+		ret = sama5d2_piobu_read_value(chip, pin, PIOBU_SOD);
+
+	if (ret < 0)
+		return ret;
+
+	return !!ret;
+}
+
+/*
+ * sama5d2_piobu_set() - gpiochip set
+ */
+static void sama5d2_piobu_set(struct gpio_chip *chip, unsigned int pin,
+			      int value)
+{
+	if (!value)
+		value = PIOBU_LOW;
+	else
+		value = PIOBU_HIGH;
+
+	sama5d2_piobu_write_value(chip, pin, PIOBU_SOD, value);
+}
+
+static int sama5d2_piobu_probe(struct platform_device *pdev)
+{
+	struct sama5d2_piobu *piobu;
+	int ret, i;
+
+	piobu = devm_kzalloc(&pdev->dev, sizeof(*piobu), GFP_KERNEL);
+	if (!piobu)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, piobu);
+	piobu->chip.label = pdev->name;
+	piobu->chip.parent = &pdev->dev;
+	piobu->chip.of_node = pdev->dev.of_node;
+	piobu->chip.owner = THIS_MODULE,
+	piobu->chip.get_direction = sama5d2_piobu_get_direction,
+	piobu->chip.direction_input = sama5d2_piobu_direction_input,
+	piobu->chip.direction_output = sama5d2_piobu_direction_output,
+	piobu->chip.get = sama5d2_piobu_get,
+	piobu->chip.set = sama5d2_piobu_set,
+	piobu->chip.base = -1,
+	piobu->chip.ngpio = PIOBU_NUM,
+	piobu->chip.can_sleep = 0,
+
+	piobu->regmap = syscon_node_to_regmap(pdev->dev.of_node);
+	if (IS_ERR(piobu->regmap)) {
+		dev_err(&pdev->dev, "Failed to get syscon regmap %ld\n",
+			PTR_ERR(piobu->regmap));
+		return PTR_ERR(piobu->regmap);
+	}
+
+	ret = devm_gpiochip_add_data(&pdev->dev, &piobu->chip, piobu);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to add gpiochip %d\n", ret);
+		return ret;
+	}
+
+	for (i = 0; i < PIOBU_NUM; ++i) {
+		ret = sama5d2_piobu_setup_pin(&piobu->chip, i);
+		if (ret) {
+			dev_err(&pdev->dev, "Failed to setup pin: %d %d\n",
+				i, ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static const struct of_device_id sama5d2_piobu_ids[] = {
+	{ .compatible = "atmel,sama5d2-secumod" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, sama5d2_piobu_ids);
+
+static struct platform_driver sama5d2_piobu_driver = {
+	.driver = {
+		.name		= "sama5d2-piobu",
+		.of_match_table	= of_match_ptr(sama5d2_piobu_ids)
+	},
+	.probe = sama5d2_piobu_probe,
+};
+
+module_platform_driver(sama5d2_piobu_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("SAMA5D2 PIOBU controller driver");
+MODULE_AUTHOR("Andrei Stefanescu <andrei.stefanescu@microchip.com>");
diff --git a/drivers/gpio/gpio-sch.c b/drivers/gpio/gpio-sch.c
new file mode 100644
index 000000000..3a1b1adb0
--- /dev/null
+++ b/drivers/gpio/gpio-sch.c
@@ -0,0 +1,225 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * GPIO interface for Intel Poulsbo SCH
+ *
+ *  Copyright (c) 2010 CompuLab Ltd
+ *  Author: Denis Turischev <denis@compulab.co.il>
+ */
+
+#include <linux/acpi.h>
+#include <linux/errno.h>
+#include <linux/gpio/driver.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci_ids.h>
+#include <linux/platform_device.h>
+
+#define GEN	0x00
+#define GIO	0x04
+#define GLV	0x08
+
+struct sch_gpio {
+	struct gpio_chip chip;
+	spinlock_t lock;
+	unsigned short iobase;
+	unsigned short resume_base;
+};
+
+static unsigned int sch_gpio_offset(struct sch_gpio *sch, unsigned int gpio,
+				unsigned int reg)
+{
+	unsigned int base = 0;
+
+	if (gpio >= sch->resume_base) {
+		gpio -= sch->resume_base;
+		base += 0x20;
+	}
+
+	return base + reg + gpio / 8;
+}
+
+static unsigned int sch_gpio_bit(struct sch_gpio *sch, unsigned int gpio)
+{
+	if (gpio >= sch->resume_base)
+		gpio -= sch->resume_base;
+	return gpio % 8;
+}
+
+static int sch_gpio_reg_get(struct sch_gpio *sch, unsigned int gpio, unsigned int reg)
+{
+	unsigned short offset, bit;
+	u8 reg_val;
+
+	offset = sch_gpio_offset(sch, gpio, reg);
+	bit = sch_gpio_bit(sch, gpio);
+
+	reg_val = !!(inb(sch->iobase + offset) & BIT(bit));
+
+	return reg_val;
+}
+
+static void sch_gpio_reg_set(struct sch_gpio *sch, unsigned int gpio, unsigned int reg,
+			     int val)
+{
+	unsigned short offset, bit;
+	u8 reg_val;
+
+	offset = sch_gpio_offset(sch, gpio, reg);
+	bit = sch_gpio_bit(sch, gpio);
+
+	reg_val = inb(sch->iobase + offset);
+
+	if (val)
+		outb(reg_val | BIT(bit), sch->iobase + offset);
+	else
+		outb((reg_val & ~BIT(bit)), sch->iobase + offset);
+}
+
+static int sch_gpio_direction_in(struct gpio_chip *gc, unsigned int gpio_num)
+{
+	struct sch_gpio *sch = gpiochip_get_data(gc);
+
+	spin_lock(&sch->lock);
+	sch_gpio_reg_set(sch, gpio_num, GIO, 1);
+	spin_unlock(&sch->lock);
+	return 0;
+}
+
+static int sch_gpio_get(struct gpio_chip *gc, unsigned int gpio_num)
+{
+	struct sch_gpio *sch = gpiochip_get_data(gc);
+
+	return sch_gpio_reg_get(sch, gpio_num, GLV);
+}
+
+static void sch_gpio_set(struct gpio_chip *gc, unsigned int gpio_num, int val)
+{
+	struct sch_gpio *sch = gpiochip_get_data(gc);
+
+	spin_lock(&sch->lock);
+	sch_gpio_reg_set(sch, gpio_num, GLV, val);
+	spin_unlock(&sch->lock);
+}
+
+static int sch_gpio_direction_out(struct gpio_chip *gc, unsigned int gpio_num,
+				  int val)
+{
+	struct sch_gpio *sch = gpiochip_get_data(gc);
+
+	spin_lock(&sch->lock);
+	sch_gpio_reg_set(sch, gpio_num, GIO, 0);
+	spin_unlock(&sch->lock);
+
+	/*
+	 * according to the datasheet, writing to the level register has no
+	 * effect when GPIO is programmed as input.
+	 * Actually the the level register is read-only when configured as input.
+	 * Thus presetting the output level before switching to output is _NOT_ possible.
+	 * Hence we set the level after configuring the GPIO as output.
+	 * But we cannot prevent a short low pulse if direction is set to high
+	 * and an external pull-up is connected.
+	 */
+	sch_gpio_set(gc, gpio_num, val);
+	return 0;
+}
+
+static int sch_gpio_get_direction(struct gpio_chip *gc, unsigned int gpio_num)
+{
+	struct sch_gpio *sch = gpiochip_get_data(gc);
+
+	if (sch_gpio_reg_get(sch, gpio_num, GIO))
+		return GPIO_LINE_DIRECTION_IN;
+
+	return GPIO_LINE_DIRECTION_OUT;
+}
+
+static const struct gpio_chip sch_gpio_chip = {
+	.label			= "sch_gpio",
+	.owner			= THIS_MODULE,
+	.direction_input	= sch_gpio_direction_in,
+	.get			= sch_gpio_get,
+	.direction_output	= sch_gpio_direction_out,
+	.set			= sch_gpio_set,
+	.get_direction		= sch_gpio_get_direction,
+};
+
+static int sch_gpio_probe(struct platform_device *pdev)
+{
+	struct sch_gpio *sch;
+	struct resource *res;
+
+	sch = devm_kzalloc(&pdev->dev, sizeof(*sch), GFP_KERNEL);
+	if (!sch)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+	if (!res)
+		return -EBUSY;
+
+	if (!devm_request_region(&pdev->dev, res->start, resource_size(res),
+				 pdev->name))
+		return -EBUSY;
+
+	spin_lock_init(&sch->lock);
+	sch->iobase = res->start;
+	sch->chip = sch_gpio_chip;
+	sch->chip.label = dev_name(&pdev->dev);
+	sch->chip.parent = &pdev->dev;
+
+	switch (pdev->id) {
+	case PCI_DEVICE_ID_INTEL_SCH_LPC:
+		sch->resume_base = 10;
+		sch->chip.ngpio = 14;
+
+		/*
+		 * GPIO[6:0] enabled by default
+		 * GPIO7 is configured by the CMC as SLPIOVR
+		 * Enable GPIO[9:8] core powered gpios explicitly
+		 */
+		sch_gpio_reg_set(sch, 8, GEN, 1);
+		sch_gpio_reg_set(sch, 9, GEN, 1);
+		/*
+		 * SUS_GPIO[2:0] enabled by default
+		 * Enable SUS_GPIO3 resume powered gpio explicitly
+		 */
+		sch_gpio_reg_set(sch, 13, GEN, 1);
+		break;
+
+	case PCI_DEVICE_ID_INTEL_ITC_LPC:
+		sch->resume_base = 5;
+		sch->chip.ngpio = 14;
+		break;
+
+	case PCI_DEVICE_ID_INTEL_CENTERTON_ILB:
+		sch->resume_base = 21;
+		sch->chip.ngpio = 30;
+		break;
+
+	case PCI_DEVICE_ID_INTEL_QUARK_X1000_ILB:
+		sch->resume_base = 2;
+		sch->chip.ngpio = 8;
+		break;
+
+	default:
+		return -ENODEV;
+	}
+
+	platform_set_drvdata(pdev, sch);
+
+	return devm_gpiochip_add_data(&pdev->dev, &sch->chip, sch);
+}
+
+static struct platform_driver sch_gpio_driver = {
+	.driver = {
+		.name = "sch_gpio",
+	},
+	.probe		= sch_gpio_probe,
+};
+
+module_platform_driver(sch_gpio_driver);
+
+MODULE_AUTHOR("Denis Turischev <denis@compulab.co.il>");
+MODULE_DESCRIPTION("GPIO interface for Intel Poulsbo SCH");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:sch_gpio");
diff --git a/drivers/gpio/gpio-sch311x.c b/drivers/gpio/gpio-sch311x.c
new file mode 100644
index 000000000..da01e1cad
--- /dev/null
+++ b/drivers/gpio/gpio-sch311x.c
@@ -0,0 +1,471 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * GPIO driver for the SMSC SCH311x Super-I/O chips
+ *
+ * Copyright (C) 2013 Bruno Randolf <br1@einfach.org>
+ *
+ * SuperIO functions and chip detection:
+ * (c) Copyright 2008 Wim Van Sebroeck <wim@iguana.be>.
+ */
+
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/gpio/driver.h>
+#include <linux/bitops.h>
+#include <linux/io.h>
+
+#define DRV_NAME			"gpio-sch311x"
+
+#define SCH311X_GPIO_CONF_DIR		BIT(0)
+#define SCH311X_GPIO_CONF_INVERT	BIT(1)
+#define SCH311X_GPIO_CONF_OPEN_DRAIN	BIT(7)
+
+#define SIO_CONFIG_KEY_ENTER		0x55
+#define SIO_CONFIG_KEY_EXIT		0xaa
+
+#define GP1				0x4b
+
+static int sch311x_ioports[] = { 0x2e, 0x4e, 0x162e, 0x164e };
+
+static struct platform_device *sch311x_gpio_pdev;
+
+struct sch311x_pdev_data {		/* platform device data */
+	unsigned short runtime_reg;	/* runtime register base address */
+};
+
+struct sch311x_gpio_block {		/* one GPIO block runtime data */
+	struct gpio_chip chip;
+	unsigned short data_reg;	/* from definition below */
+	unsigned short *config_regs;	/* pointer to definition below */
+	unsigned short runtime_reg;	/* runtime register */
+	spinlock_t lock;		/* lock for this GPIO block */
+};
+
+struct sch311x_gpio_priv {		/* driver private data */
+	struct sch311x_gpio_block blocks[6];
+};
+
+struct sch311x_gpio_block_def {		/* register address definitions */
+	unsigned short data_reg;
+	unsigned short config_regs[8];
+	unsigned short base;
+};
+
+/* Note: some GPIOs are not available, these are marked with 0x00 */
+
+static struct sch311x_gpio_block_def sch311x_gpio_blocks[] = {
+	{
+		.data_reg = 0x4b,	/* GP1 */
+		.config_regs = {0x23, 0x24, 0x25, 0x26, 0x27, 0x29, 0x2a, 0x2b},
+		.base = 10,
+	},
+	{
+		.data_reg = 0x4c,	/* GP2 */
+		.config_regs = {0x00, 0x2c, 0x2d, 0x00, 0x00, 0x00, 0x00, 0x32},
+		.base = 20,
+	},
+	{
+		.data_reg = 0x4d,	/* GP3 */
+		.config_regs = {0x33, 0x34, 0x35, 0x36, 0x37, 0x00, 0x39, 0x3a},
+		.base = 30,
+	},
+	{
+		.data_reg = 0x4e,	/* GP4 */
+		.config_regs = {0x3b, 0x00, 0x3d, 0x00, 0x6e, 0x6f, 0x72, 0x73},
+		.base = 40,
+	},
+	{
+		.data_reg = 0x4f,	/* GP5 */
+		.config_regs = {0x3f, 0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46},
+		.base = 50,
+	},
+	{
+		.data_reg = 0x50,	/* GP6 */
+		.config_regs = {0x47, 0x48, 0x54, 0x55, 0x56, 0x57, 0x58, 0x59},
+		.base = 60,
+	},
+};
+
+/*
+ *	Super-IO functions
+ */
+
+static inline int sch311x_sio_enter(int sio_config_port)
+{
+	/* Don't step on other drivers' I/O space by accident. */
+	if (!request_muxed_region(sio_config_port, 2, DRV_NAME)) {
+		pr_err(DRV_NAME "I/O address 0x%04x already in use\n",
+		       sio_config_port);
+		return -EBUSY;
+	}
+
+	outb(SIO_CONFIG_KEY_ENTER, sio_config_port);
+	return 0;
+}
+
+static inline void sch311x_sio_exit(int sio_config_port)
+{
+	outb(SIO_CONFIG_KEY_EXIT, sio_config_port);
+	release_region(sio_config_port, 2);
+}
+
+static inline int sch311x_sio_inb(int sio_config_port, int reg)
+{
+	outb(reg, sio_config_port);
+	return inb(sio_config_port + 1);
+}
+
+static inline void sch311x_sio_outb(int sio_config_port, int reg, int val)
+{
+	outb(reg, sio_config_port);
+	outb(val, sio_config_port + 1);
+}
+
+
+/*
+ *	GPIO functions
+ */
+
+static int sch311x_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+	struct sch311x_gpio_block *block = gpiochip_get_data(chip);
+
+	if (block->config_regs[offset] == 0) /* GPIO is not available */
+		return -ENODEV;
+
+	if (!request_region(block->runtime_reg + block->config_regs[offset],
+			    1, DRV_NAME)) {
+		dev_err(chip->parent, "Failed to request region 0x%04x.\n",
+			block->runtime_reg + block->config_regs[offset]);
+		return -EBUSY;
+	}
+	return 0;
+}
+
+static void sch311x_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+	struct sch311x_gpio_block *block = gpiochip_get_data(chip);
+
+	if (block->config_regs[offset] == 0) /* GPIO is not available */
+		return;
+
+	release_region(block->runtime_reg + block->config_regs[offset], 1);
+}
+
+static int sch311x_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct sch311x_gpio_block *block = gpiochip_get_data(chip);
+	u8 data;
+
+	spin_lock(&block->lock);
+	data = inb(block->runtime_reg + block->data_reg);
+	spin_unlock(&block->lock);
+
+	return !!(data & BIT(offset));
+}
+
+static void __sch311x_gpio_set(struct sch311x_gpio_block *block,
+			       unsigned offset, int value)
+{
+	u8 data = inb(block->runtime_reg + block->data_reg);
+	if (value)
+		data |= BIT(offset);
+	else
+		data &= ~BIT(offset);
+	outb(data, block->runtime_reg + block->data_reg);
+}
+
+static void sch311x_gpio_set(struct gpio_chip *chip, unsigned offset,
+			     int value)
+{
+	struct sch311x_gpio_block *block = gpiochip_get_data(chip);
+
+	spin_lock(&block->lock);
+	__sch311x_gpio_set(block, offset, value);
+	spin_unlock(&block->lock);
+}
+
+static int sch311x_gpio_direction_in(struct gpio_chip *chip, unsigned offset)
+{
+	struct sch311x_gpio_block *block = gpiochip_get_data(chip);
+	u8 data;
+
+	spin_lock(&block->lock);
+	data = inb(block->runtime_reg + block->config_regs[offset]);
+	data |= SCH311X_GPIO_CONF_DIR;
+	outb(data, block->runtime_reg + block->config_regs[offset]);
+	spin_unlock(&block->lock);
+
+	return 0;
+}
+
+static int sch311x_gpio_direction_out(struct gpio_chip *chip, unsigned offset,
+				      int value)
+{
+	struct sch311x_gpio_block *block = gpiochip_get_data(chip);
+	u8 data;
+
+	spin_lock(&block->lock);
+
+	data = inb(block->runtime_reg + block->config_regs[offset]);
+	data &= ~SCH311X_GPIO_CONF_DIR;
+	outb(data, block->runtime_reg + block->config_regs[offset]);
+	__sch311x_gpio_set(block, offset, value);
+
+	spin_unlock(&block->lock);
+	return 0;
+}
+
+static int sch311x_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
+{
+	struct sch311x_gpio_block *block = gpiochip_get_data(chip);
+	u8 data;
+
+	spin_lock(&block->lock);
+	data = inb(block->runtime_reg + block->config_regs[offset]);
+	spin_unlock(&block->lock);
+
+	if (data & SCH311X_GPIO_CONF_DIR)
+		return GPIO_LINE_DIRECTION_IN;
+
+	return GPIO_LINE_DIRECTION_OUT;
+}
+
+static int sch311x_gpio_set_config(struct gpio_chip *chip, unsigned offset,
+				   unsigned long config)
+{
+	struct sch311x_gpio_block *block = gpiochip_get_data(chip);
+	enum pin_config_param param = pinconf_to_config_param(config);
+	u8 data;
+
+	switch (param) {
+	case PIN_CONFIG_DRIVE_OPEN_DRAIN:
+		spin_lock(&block->lock);
+		data = inb(block->runtime_reg + block->config_regs[offset]);
+		data |= SCH311X_GPIO_CONF_OPEN_DRAIN;
+		outb(data, block->runtime_reg + block->config_regs[offset]);
+		spin_unlock(&block->lock);
+		return 0;
+	case PIN_CONFIG_DRIVE_PUSH_PULL:
+		spin_lock(&block->lock);
+		data = inb(block->runtime_reg + block->config_regs[offset]);
+		data &= ~SCH311X_GPIO_CONF_OPEN_DRAIN;
+		outb(data, block->runtime_reg + block->config_regs[offset]);
+		spin_unlock(&block->lock);
+		return 0;
+	default:
+		break;
+	}
+	return -ENOTSUPP;
+}
+
+static int sch311x_gpio_probe(struct platform_device *pdev)
+{
+	struct sch311x_pdev_data *pdata = dev_get_platdata(&pdev->dev);
+	struct sch311x_gpio_priv *priv;
+	struct sch311x_gpio_block *block;
+	int err, i;
+
+	/* we can register all GPIO data registers at once */
+	if (!devm_request_region(&pdev->dev, pdata->runtime_reg + GP1, 6,
+		DRV_NAME)) {
+		dev_err(&pdev->dev, "Failed to request region 0x%04x-0x%04x.\n",
+			pdata->runtime_reg + GP1, pdata->runtime_reg + GP1 + 5);
+		return -EBUSY;
+	}
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, priv);
+
+	for (i = 0; i < ARRAY_SIZE(priv->blocks); i++) {
+		block = &priv->blocks[i];
+
+		spin_lock_init(&block->lock);
+
+		block->chip.label = DRV_NAME;
+		block->chip.owner = THIS_MODULE;
+		block->chip.request = sch311x_gpio_request;
+		block->chip.free = sch311x_gpio_free;
+		block->chip.direction_input = sch311x_gpio_direction_in;
+		block->chip.direction_output = sch311x_gpio_direction_out;
+		block->chip.get_direction = sch311x_gpio_get_direction;
+		block->chip.set_config = sch311x_gpio_set_config;
+		block->chip.get = sch311x_gpio_get;
+		block->chip.set = sch311x_gpio_set;
+		block->chip.ngpio = 8;
+		block->chip.parent = &pdev->dev;
+		block->chip.base = sch311x_gpio_blocks[i].base;
+		block->config_regs = sch311x_gpio_blocks[i].config_regs;
+		block->data_reg = sch311x_gpio_blocks[i].data_reg;
+		block->runtime_reg = pdata->runtime_reg;
+
+		err = gpiochip_add_data(&block->chip, block);
+		if (err < 0) {
+			dev_err(&pdev->dev,
+				"Could not register gpiochip, %d\n", err);
+			goto exit_err;
+		}
+		dev_info(&pdev->dev,
+			 "SMSC SCH311x GPIO block %d registered.\n", i);
+	}
+
+	return 0;
+
+exit_err:
+	/* release already registered chips */
+	for (--i; i >= 0; i--)
+		gpiochip_remove(&priv->blocks[i].chip);
+	return err;
+}
+
+static int sch311x_gpio_remove(struct platform_device *pdev)
+{
+	struct sch311x_gpio_priv *priv = platform_get_drvdata(pdev);
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(priv->blocks); i++) {
+		gpiochip_remove(&priv->blocks[i].chip);
+		dev_info(&pdev->dev,
+			 "SMSC SCH311x GPIO block %d unregistered.\n", i);
+	}
+	return 0;
+}
+
+static struct platform_driver sch311x_gpio_driver = {
+	.driver.name	= DRV_NAME,
+	.probe		= sch311x_gpio_probe,
+	.remove		= sch311x_gpio_remove,
+};
+
+
+/*
+ *	Init & exit routines
+ */
+
+static int __init sch311x_detect(int sio_config_port, unsigned short *addr)
+{
+	int err = 0, reg;
+	unsigned short base_addr;
+	u8 dev_id;
+
+	err = sch311x_sio_enter(sio_config_port);
+	if (err)
+		return err;
+
+	/* Check device ID. */
+	reg = sch311x_sio_inb(sio_config_port, 0x20);
+	switch (reg) {
+	case 0x7c: /* SCH3112 */
+		dev_id = 2;
+		break;
+	case 0x7d: /* SCH3114 */
+		dev_id = 4;
+		break;
+	case 0x7f: /* SCH3116 */
+		dev_id = 6;
+		break;
+	default:
+		err = -ENODEV;
+		goto exit;
+	}
+
+	/* Select logical device A (runtime registers) */
+	sch311x_sio_outb(sio_config_port, 0x07, 0x0a);
+
+	/* Check if Logical Device Register is currently active */
+	if ((sch311x_sio_inb(sio_config_port, 0x30) & 0x01) == 0)
+		pr_info("Seems that LDN 0x0a is not active...\n");
+
+	/* Get the base address of the runtime registers */
+	base_addr = (sch311x_sio_inb(sio_config_port, 0x60) << 8) |
+			   sch311x_sio_inb(sio_config_port, 0x61);
+	if (!base_addr) {
+		pr_err("Base address not set\n");
+		err = -ENODEV;
+		goto exit;
+	}
+	*addr = base_addr;
+
+	pr_info("Found an SMSC SCH311%d chip at 0x%04x\n", dev_id, base_addr);
+
+exit:
+	sch311x_sio_exit(sio_config_port);
+	return err;
+}
+
+static int __init sch311x_gpio_pdev_add(const unsigned short addr)
+{
+	struct sch311x_pdev_data pdata;
+	int err;
+
+	pdata.runtime_reg = addr;
+
+	sch311x_gpio_pdev = platform_device_alloc(DRV_NAME, -1);
+	if (!sch311x_gpio_pdev)
+		return -ENOMEM;
+
+	err = platform_device_add_data(sch311x_gpio_pdev,
+				       &pdata, sizeof(pdata));
+	if (err) {
+		pr_err(DRV_NAME "Platform data allocation failed\n");
+		goto err;
+	}
+
+	err = platform_device_add(sch311x_gpio_pdev);
+	if (err) {
+		pr_err(DRV_NAME "Device addition failed\n");
+		goto err;
+	}
+	return 0;
+
+err:
+	platform_device_put(sch311x_gpio_pdev);
+	return err;
+}
+
+static int __init sch311x_gpio_init(void)
+{
+	int err, i;
+	unsigned short addr = 0;
+
+	for (i = 0; i < ARRAY_SIZE(sch311x_ioports); i++)
+		if (sch311x_detect(sch311x_ioports[i], &addr) == 0)
+			break;
+
+	if (!addr)
+		return -ENODEV;
+
+	err = platform_driver_register(&sch311x_gpio_driver);
+	if (err)
+		return err;
+
+	err = sch311x_gpio_pdev_add(addr);
+	if (err)
+		goto unreg_platform_driver;
+
+	return 0;
+
+unreg_platform_driver:
+	platform_driver_unregister(&sch311x_gpio_driver);
+	return err;
+}
+
+static void __exit sch311x_gpio_exit(void)
+{
+	platform_device_unregister(sch311x_gpio_pdev);
+	platform_driver_unregister(&sch311x_gpio_driver);
+}
+
+module_init(sch311x_gpio_init);
+module_exit(sch311x_gpio_exit);
+
+MODULE_AUTHOR("Bruno Randolf <br1@einfach.org>");
+MODULE_DESCRIPTION("SMSC SCH311x GPIO Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:gpio-sch311x");
diff --git a/drivers/gpio/gpio-sifive.c b/drivers/gpio/gpio-sifive.c
new file mode 100644
index 000000000..a42ffb9f3
--- /dev/null
+++ b/drivers/gpio/gpio-sifive.c
@@ -0,0 +1,253 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 SiFive
+ */
+
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/of_irq.h>
+#include <linux/gpio/driver.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/regmap.h>
+
+#define SIFIVE_GPIO_INPUT_VAL	0x00
+#define SIFIVE_GPIO_INPUT_EN	0x04
+#define SIFIVE_GPIO_OUTPUT_EN	0x08
+#define SIFIVE_GPIO_OUTPUT_VAL	0x0C
+#define SIFIVE_GPIO_RISE_IE	0x18
+#define SIFIVE_GPIO_RISE_IP	0x1C
+#define SIFIVE_GPIO_FALL_IE	0x20
+#define SIFIVE_GPIO_FALL_IP	0x24
+#define SIFIVE_GPIO_HIGH_IE	0x28
+#define SIFIVE_GPIO_HIGH_IP	0x2C
+#define SIFIVE_GPIO_LOW_IE	0x30
+#define SIFIVE_GPIO_LOW_IP	0x34
+#define SIFIVE_GPIO_OUTPUT_XOR	0x40
+
+#define SIFIVE_GPIO_MAX		32
+#define SIFIVE_GPIO_IRQ_OFFSET	7
+
+struct sifive_gpio {
+	void __iomem		*base;
+	struct gpio_chip	gc;
+	struct regmap		*regs;
+	unsigned long		irq_state;
+	unsigned int		trigger[SIFIVE_GPIO_MAX];
+	unsigned int		irq_parent[SIFIVE_GPIO_MAX];
+};
+
+static void sifive_gpio_set_ie(struct sifive_gpio *chip, unsigned int offset)
+{
+	unsigned long flags;
+	unsigned int trigger;
+
+	spin_lock_irqsave(&chip->gc.bgpio_lock, flags);
+	trigger = (chip->irq_state & BIT(offset)) ? chip->trigger[offset] : 0;
+	regmap_update_bits(chip->regs, SIFIVE_GPIO_RISE_IE, BIT(offset),
+			   (trigger & IRQ_TYPE_EDGE_RISING) ? BIT(offset) : 0);
+	regmap_update_bits(chip->regs, SIFIVE_GPIO_FALL_IE, BIT(offset),
+			   (trigger & IRQ_TYPE_EDGE_FALLING) ? BIT(offset) : 0);
+	regmap_update_bits(chip->regs, SIFIVE_GPIO_HIGH_IE, BIT(offset),
+			   (trigger & IRQ_TYPE_LEVEL_HIGH) ? BIT(offset) : 0);
+	regmap_update_bits(chip->regs, SIFIVE_GPIO_LOW_IE, BIT(offset),
+			   (trigger & IRQ_TYPE_LEVEL_LOW) ? BIT(offset) : 0);
+	spin_unlock_irqrestore(&chip->gc.bgpio_lock, flags);
+}
+
+static int sifive_gpio_irq_set_type(struct irq_data *d, unsigned int trigger)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct sifive_gpio *chip = gpiochip_get_data(gc);
+	int offset = irqd_to_hwirq(d);
+
+	if (offset < 0 || offset >= gc->ngpio)
+		return -EINVAL;
+
+	chip->trigger[offset] = trigger;
+	sifive_gpio_set_ie(chip, offset);
+	return 0;
+}
+
+static void sifive_gpio_irq_enable(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct sifive_gpio *chip = gpiochip_get_data(gc);
+	int offset = irqd_to_hwirq(d) % SIFIVE_GPIO_MAX;
+	u32 bit = BIT(offset);
+	unsigned long flags;
+
+	irq_chip_enable_parent(d);
+
+	/* Switch to input */
+	gc->direction_input(gc, offset);
+
+	spin_lock_irqsave(&gc->bgpio_lock, flags);
+	/* Clear any sticky pending interrupts */
+	regmap_write(chip->regs, SIFIVE_GPIO_RISE_IP, bit);
+	regmap_write(chip->regs, SIFIVE_GPIO_FALL_IP, bit);
+	regmap_write(chip->regs, SIFIVE_GPIO_HIGH_IP, bit);
+	regmap_write(chip->regs, SIFIVE_GPIO_LOW_IP, bit);
+	spin_unlock_irqrestore(&gc->bgpio_lock, flags);
+
+	/* Enable interrupts */
+	assign_bit(offset, &chip->irq_state, 1);
+	sifive_gpio_set_ie(chip, offset);
+}
+
+static void sifive_gpio_irq_disable(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct sifive_gpio *chip = gpiochip_get_data(gc);
+	int offset = irqd_to_hwirq(d) % SIFIVE_GPIO_MAX;
+
+	assign_bit(offset, &chip->irq_state, 0);
+	sifive_gpio_set_ie(chip, offset);
+	irq_chip_disable_parent(d);
+}
+
+static void sifive_gpio_irq_eoi(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct sifive_gpio *chip = gpiochip_get_data(gc);
+	int offset = irqd_to_hwirq(d) % SIFIVE_GPIO_MAX;
+	u32 bit = BIT(offset);
+	unsigned long flags;
+
+	spin_lock_irqsave(&gc->bgpio_lock, flags);
+	/* Clear all pending interrupts */
+	regmap_write(chip->regs, SIFIVE_GPIO_RISE_IP, bit);
+	regmap_write(chip->regs, SIFIVE_GPIO_FALL_IP, bit);
+	regmap_write(chip->regs, SIFIVE_GPIO_HIGH_IP, bit);
+	regmap_write(chip->regs, SIFIVE_GPIO_LOW_IP, bit);
+	spin_unlock_irqrestore(&gc->bgpio_lock, flags);
+
+	irq_chip_eoi_parent(d);
+}
+
+static struct irq_chip sifive_gpio_irqchip = {
+	.name		= "sifive-gpio",
+	.irq_set_type	= sifive_gpio_irq_set_type,
+	.irq_mask	= irq_chip_mask_parent,
+	.irq_unmask	= irq_chip_unmask_parent,
+	.irq_enable	= sifive_gpio_irq_enable,
+	.irq_disable	= sifive_gpio_irq_disable,
+	.irq_eoi	= sifive_gpio_irq_eoi,
+};
+
+static int sifive_gpio_child_to_parent_hwirq(struct gpio_chip *gc,
+					     unsigned int child,
+					     unsigned int child_type,
+					     unsigned int *parent,
+					     unsigned int *parent_type)
+{
+	*parent_type = IRQ_TYPE_NONE;
+	*parent = child + SIFIVE_GPIO_IRQ_OFFSET;
+	return 0;
+}
+
+static const struct regmap_config sifive_gpio_regmap_config = {
+	.reg_bits = 32,
+	.reg_stride = 4,
+	.val_bits = 32,
+	.fast_io = true,
+	.disable_locking = true,
+};
+
+static int sifive_gpio_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *node = pdev->dev.of_node;
+	struct device_node *irq_parent;
+	struct irq_domain *parent;
+	struct gpio_irq_chip *girq;
+	struct sifive_gpio *chip;
+	int ret, ngpio;
+
+	chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	chip->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(chip->base)) {
+		dev_err(dev, "failed to allocate device memory\n");
+		return PTR_ERR(chip->base);
+	}
+
+	chip->regs = devm_regmap_init_mmio(dev, chip->base,
+					   &sifive_gpio_regmap_config);
+	if (IS_ERR(chip->regs))
+		return PTR_ERR(chip->regs);
+
+	ngpio = of_irq_count(node);
+	if (ngpio > SIFIVE_GPIO_MAX) {
+		dev_err(dev, "Too many GPIO interrupts (max=%d)\n",
+			SIFIVE_GPIO_MAX);
+		return -ENXIO;
+	}
+
+	irq_parent = of_irq_find_parent(node);
+	if (!irq_parent) {
+		dev_err(dev, "no IRQ parent node\n");
+		return -ENODEV;
+	}
+	parent = irq_find_host(irq_parent);
+	of_node_put(irq_parent);
+	if (!parent) {
+		dev_err(dev, "no IRQ parent domain\n");
+		return -ENODEV;
+	}
+
+	ret = bgpio_init(&chip->gc, dev, 4,
+			 chip->base + SIFIVE_GPIO_INPUT_VAL,
+			 chip->base + SIFIVE_GPIO_OUTPUT_VAL,
+			 NULL,
+			 chip->base + SIFIVE_GPIO_OUTPUT_EN,
+			 chip->base + SIFIVE_GPIO_INPUT_EN,
+			 BGPIOF_READ_OUTPUT_REG_SET);
+	if (ret) {
+		dev_err(dev, "unable to init generic GPIO\n");
+		return ret;
+	}
+
+	/* Disable all GPIO interrupts before enabling parent interrupts */
+	regmap_write(chip->regs, SIFIVE_GPIO_RISE_IE, 0);
+	regmap_write(chip->regs, SIFIVE_GPIO_FALL_IE, 0);
+	regmap_write(chip->regs, SIFIVE_GPIO_HIGH_IE, 0);
+	regmap_write(chip->regs, SIFIVE_GPIO_LOW_IE, 0);
+	chip->irq_state = 0;
+
+	chip->gc.base = -1;
+	chip->gc.ngpio = ngpio;
+	chip->gc.label = dev_name(dev);
+	chip->gc.parent = dev;
+	chip->gc.owner = THIS_MODULE;
+	girq = &chip->gc.irq;
+	girq->chip = &sifive_gpio_irqchip;
+	girq->fwnode = of_node_to_fwnode(node);
+	girq->parent_domain = parent;
+	girq->child_to_parent_hwirq = sifive_gpio_child_to_parent_hwirq;
+	girq->handler = handle_bad_irq;
+	girq->default_type = IRQ_TYPE_NONE;
+
+	platform_set_drvdata(pdev, chip);
+	return gpiochip_add_data(&chip->gc, chip);
+}
+
+static const struct of_device_id sifive_gpio_match[] = {
+	{ .compatible = "sifive,gpio0" },
+	{ .compatible = "sifive,fu540-c000-gpio" },
+	{ },
+};
+
+static struct platform_driver sifive_gpio_driver = {
+	.probe		= sifive_gpio_probe,
+	.driver = {
+		.name	= "sifive_gpio",
+		.of_match_table = of_match_ptr(sifive_gpio_match),
+	},
+};
+builtin_platform_driver(sifive_gpio_driver)
diff --git a/drivers/gpio/gpio-siox.c b/drivers/gpio/gpio-siox.c
new file mode 100644
index 000000000..f8c5e9fc4
--- /dev/null
+++ b/drivers/gpio/gpio-siox.c
@@ -0,0 +1,269 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2015-2018 Pengutronix, Uwe Kleine-König <kernel@pengutronix.de>
+ */
+
+#include <linux/module.h>
+#include <linux/siox.h>
+#include <linux/gpio/driver.h>
+#include <linux/of.h>
+
+struct gpio_siox_ddata {
+	struct gpio_chip gchip;
+	struct irq_chip ichip;
+	struct mutex lock;
+	u8 setdata[1];
+	u8 getdata[3];
+
+	raw_spinlock_t irqlock;
+	u32 irq_enable;
+	u32 irq_status;
+	u32 irq_type[20];
+};
+
+/*
+ * Note that this callback only sets the value that is clocked out in the next
+ * cycle.
+ */
+static int gpio_siox_set_data(struct siox_device *sdevice, u8 status, u8 buf[])
+{
+	struct gpio_siox_ddata *ddata = dev_get_drvdata(&sdevice->dev);
+
+	mutex_lock(&ddata->lock);
+	buf[0] = ddata->setdata[0];
+	mutex_unlock(&ddata->lock);
+
+	return 0;
+}
+
+static int gpio_siox_get_data(struct siox_device *sdevice, const u8 buf[])
+{
+	struct gpio_siox_ddata *ddata = dev_get_drvdata(&sdevice->dev);
+	size_t offset;
+	u32 trigger;
+
+	mutex_lock(&ddata->lock);
+
+	raw_spin_lock_irq(&ddata->irqlock);
+
+	for (offset = 0; offset < 12; ++offset) {
+		unsigned int bitpos = 11 - offset;
+		unsigned int gpiolevel = buf[bitpos / 8] & (1 << bitpos % 8);
+		unsigned int prev_level =
+			ddata->getdata[bitpos / 8] & (1 << (bitpos % 8));
+		u32 irq_type = ddata->irq_type[offset];
+
+		if (gpiolevel) {
+			if ((irq_type & IRQ_TYPE_LEVEL_HIGH) ||
+			    ((irq_type & IRQ_TYPE_EDGE_RISING) && !prev_level))
+				ddata->irq_status |= 1 << offset;
+		} else {
+			if ((irq_type & IRQ_TYPE_LEVEL_LOW) ||
+			    ((irq_type & IRQ_TYPE_EDGE_FALLING) && prev_level))
+				ddata->irq_status |= 1 << offset;
+		}
+	}
+
+	trigger = ddata->irq_status & ddata->irq_enable;
+
+	raw_spin_unlock_irq(&ddata->irqlock);
+
+	ddata->getdata[0] = buf[0];
+	ddata->getdata[1] = buf[1];
+	ddata->getdata[2] = buf[2];
+
+	mutex_unlock(&ddata->lock);
+
+	for (offset = 0; offset < 12; ++offset) {
+		if (trigger & (1 << offset)) {
+			struct irq_domain *irqdomain = ddata->gchip.irq.domain;
+			unsigned int irq = irq_find_mapping(irqdomain, offset);
+
+			/*
+			 * Conceptually handle_nested_irq should call the flow
+			 * handler of the irq chip. But it doesn't, so we have
+			 * to clean the irq_status here.
+			 */
+			raw_spin_lock_irq(&ddata->irqlock);
+			ddata->irq_status &= ~(1 << offset);
+			raw_spin_unlock_irq(&ddata->irqlock);
+
+			handle_nested_irq(irq);
+		}
+	}
+
+	return 0;
+}
+
+static void gpio_siox_irq_ack(struct irq_data *d)
+{
+	struct irq_chip *ic = irq_data_get_irq_chip(d);
+	struct gpio_siox_ddata *ddata =
+		container_of(ic, struct gpio_siox_ddata, ichip);
+
+	raw_spin_lock(&ddata->irqlock);
+	ddata->irq_status &= ~(1 << d->hwirq);
+	raw_spin_unlock(&ddata->irqlock);
+}
+
+static void gpio_siox_irq_mask(struct irq_data *d)
+{
+	struct irq_chip *ic = irq_data_get_irq_chip(d);
+	struct gpio_siox_ddata *ddata =
+		container_of(ic, struct gpio_siox_ddata, ichip);
+
+	raw_spin_lock(&ddata->irqlock);
+	ddata->irq_enable &= ~(1 << d->hwirq);
+	raw_spin_unlock(&ddata->irqlock);
+}
+
+static void gpio_siox_irq_unmask(struct irq_data *d)
+{
+	struct irq_chip *ic = irq_data_get_irq_chip(d);
+	struct gpio_siox_ddata *ddata =
+		container_of(ic, struct gpio_siox_ddata, ichip);
+
+	raw_spin_lock(&ddata->irqlock);
+	ddata->irq_enable |= 1 << d->hwirq;
+	raw_spin_unlock(&ddata->irqlock);
+}
+
+static int gpio_siox_irq_set_type(struct irq_data *d, u32 type)
+{
+	struct irq_chip *ic = irq_data_get_irq_chip(d);
+	struct gpio_siox_ddata *ddata =
+		container_of(ic, struct gpio_siox_ddata, ichip);
+
+	raw_spin_lock(&ddata->irqlock);
+	ddata->irq_type[d->hwirq] = type;
+	raw_spin_unlock(&ddata->irqlock);
+
+	return 0;
+}
+
+static int gpio_siox_get(struct gpio_chip *chip, unsigned int offset)
+{
+	struct gpio_siox_ddata *ddata =
+		container_of(chip, struct gpio_siox_ddata, gchip);
+	int ret;
+
+	mutex_lock(&ddata->lock);
+
+	if (offset >= 12) {
+		unsigned int bitpos = 19 - offset;
+
+		ret = ddata->setdata[0] & (1 << bitpos);
+	} else {
+		unsigned int bitpos = 11 - offset;
+
+		ret = ddata->getdata[bitpos / 8] & (1 << (bitpos % 8));
+	}
+
+	mutex_unlock(&ddata->lock);
+
+	return ret;
+}
+
+static void gpio_siox_set(struct gpio_chip *chip,
+			  unsigned int offset, int value)
+{
+	struct gpio_siox_ddata *ddata =
+		container_of(chip, struct gpio_siox_ddata, gchip);
+	u8 mask = 1 << (19 - offset);
+
+	mutex_lock(&ddata->lock);
+
+	if (value)
+		ddata->setdata[0] |= mask;
+	else
+		ddata->setdata[0] &= ~mask;
+
+	mutex_unlock(&ddata->lock);
+}
+
+static int gpio_siox_direction_input(struct gpio_chip *chip,
+				     unsigned int offset)
+{
+	if (offset >= 12)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int gpio_siox_direction_output(struct gpio_chip *chip,
+				      unsigned int offset, int value)
+{
+	if (offset < 12)
+		return -EINVAL;
+
+	gpio_siox_set(chip, offset, value);
+	return 0;
+}
+
+static int gpio_siox_get_direction(struct gpio_chip *chip, unsigned int offset)
+{
+	if (offset < 12)
+		return GPIO_LINE_DIRECTION_IN;
+	else
+		return GPIO_LINE_DIRECTION_OUT;
+}
+
+static int gpio_siox_probe(struct siox_device *sdevice)
+{
+	struct gpio_siox_ddata *ddata;
+	struct gpio_irq_chip *girq;
+	struct device *dev = &sdevice->dev;
+	int ret;
+
+	ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);
+	if (!ddata)
+		return -ENOMEM;
+
+	dev_set_drvdata(dev, ddata);
+
+	mutex_init(&ddata->lock);
+	raw_spin_lock_init(&ddata->irqlock);
+
+	ddata->gchip.base = -1;
+	ddata->gchip.can_sleep = 1;
+	ddata->gchip.parent = dev;
+	ddata->gchip.owner = THIS_MODULE;
+	ddata->gchip.get = gpio_siox_get;
+	ddata->gchip.set = gpio_siox_set;
+	ddata->gchip.direction_input = gpio_siox_direction_input;
+	ddata->gchip.direction_output = gpio_siox_direction_output;
+	ddata->gchip.get_direction = gpio_siox_get_direction;
+	ddata->gchip.ngpio = 20;
+
+	ddata->ichip.name = "siox-gpio";
+	ddata->ichip.irq_ack = gpio_siox_irq_ack;
+	ddata->ichip.irq_mask = gpio_siox_irq_mask;
+	ddata->ichip.irq_unmask = gpio_siox_irq_unmask;
+	ddata->ichip.irq_set_type = gpio_siox_irq_set_type;
+
+	girq = &ddata->gchip.irq;
+	girq->chip = &ddata->ichip;
+	girq->default_type = IRQ_TYPE_NONE;
+	girq->handler = handle_level_irq;
+	girq->threaded = true;
+
+	ret = devm_gpiochip_add_data(dev, &ddata->gchip, NULL);
+	if (ret)
+		dev_err(dev, "Failed to register gpio chip (%d)\n", ret);
+
+	return ret;
+}
+
+static struct siox_driver gpio_siox_driver = {
+	.probe = gpio_siox_probe,
+	.set_data = gpio_siox_set_data,
+	.get_data = gpio_siox_get_data,
+	.driver = {
+		.name = "gpio-siox",
+	},
+};
+module_siox_driver(gpio_siox_driver);
+
+MODULE_AUTHOR("Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>");
+MODULE_DESCRIPTION("SIOX gpio driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-sl28cpld.c b/drivers/gpio/gpio-sl28cpld.c
new file mode 100644
index 000000000..889b8f562
--- /dev/null
+++ b/drivers/gpio/gpio-sl28cpld.c
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * sl28cpld GPIO driver
+ *
+ * Copyright 2020 Michael Walle <michael@walle.cc>
+ */
+
+#include <linux/device.h>
+#include <linux/gpio/driver.h>
+#include <linux/gpio/regmap.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+/* GPIO flavor */
+#define GPIO_REG_DIR	0x00
+#define GPIO_REG_OUT	0x01
+#define GPIO_REG_IN	0x02
+#define GPIO_REG_IE	0x03
+#define GPIO_REG_IP	0x04
+
+/* input-only flavor */
+#define GPI_REG_IN	0x00
+
+/* output-only flavor */
+#define GPO_REG_OUT	0x00
+
+enum sl28cpld_gpio_type {
+	SL28CPLD_GPIO = 1,
+	SL28CPLD_GPI,
+	SL28CPLD_GPO,
+};
+
+static const struct regmap_irq sl28cpld_gpio_irqs[] = {
+	REGMAP_IRQ_REG_LINE(0, 8),
+	REGMAP_IRQ_REG_LINE(1, 8),
+	REGMAP_IRQ_REG_LINE(2, 8),
+	REGMAP_IRQ_REG_LINE(3, 8),
+	REGMAP_IRQ_REG_LINE(4, 8),
+	REGMAP_IRQ_REG_LINE(5, 8),
+	REGMAP_IRQ_REG_LINE(6, 8),
+	REGMAP_IRQ_REG_LINE(7, 8),
+};
+
+static int sl28cpld_gpio_irq_init(struct platform_device *pdev,
+				  unsigned int base,
+				  struct gpio_regmap_config *config)
+{
+	struct regmap_irq_chip_data *irq_data;
+	struct regmap_irq_chip *irq_chip;
+	struct device *dev = &pdev->dev;
+	int irq, ret;
+
+	if (!device_property_read_bool(dev, "interrupt-controller"))
+		return 0;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	irq_chip = devm_kzalloc(dev, sizeof(*irq_chip), GFP_KERNEL);
+	if (!irq_chip)
+		return -ENOMEM;
+
+	irq_chip->name = "sl28cpld-gpio-irq",
+	irq_chip->irqs = sl28cpld_gpio_irqs;
+	irq_chip->num_irqs = ARRAY_SIZE(sl28cpld_gpio_irqs);
+	irq_chip->num_regs = 1;
+	irq_chip->status_base = base + GPIO_REG_IP;
+	irq_chip->mask_base = base + GPIO_REG_IE;
+	irq_chip->mask_invert = true,
+	irq_chip->ack_base = base + GPIO_REG_IP;
+
+	ret = devm_regmap_add_irq_chip_fwnode(dev, dev_fwnode(dev),
+					      config->regmap, irq,
+					      IRQF_SHARED | IRQF_ONESHOT,
+					      0, irq_chip, &irq_data);
+	if (ret)
+		return ret;
+
+	config->irq_domain = regmap_irq_get_domain(irq_data);
+
+	return 0;
+}
+
+static int sl28cpld_gpio_probe(struct platform_device *pdev)
+{
+	struct gpio_regmap_config config = {0};
+	enum sl28cpld_gpio_type type;
+	struct regmap *regmap;
+	u32 base;
+	int ret;
+
+	if (!pdev->dev.parent)
+		return -ENODEV;
+
+	type = (uintptr_t)device_get_match_data(&pdev->dev);
+	if (!type)
+		return -ENODEV;
+
+	ret = device_property_read_u32(&pdev->dev, "reg", &base);
+	if (ret)
+		return -EINVAL;
+
+	regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!regmap)
+		return -ENODEV;
+
+	config.regmap = regmap;
+	config.parent = &pdev->dev;
+	config.ngpio = 8;
+
+	switch (type) {
+	case SL28CPLD_GPIO:
+		config.reg_dat_base = base + GPIO_REG_IN;
+		config.reg_set_base = base + GPIO_REG_OUT;
+		/* reg_dir_out_base might be zero */
+		config.reg_dir_out_base = GPIO_REGMAP_ADDR(base + GPIO_REG_DIR);
+
+		/* This type supports interrupts */
+		ret = sl28cpld_gpio_irq_init(pdev, base, &config);
+		if (ret)
+			return ret;
+		break;
+	case SL28CPLD_GPO:
+		config.reg_set_base = base + GPO_REG_OUT;
+		break;
+	case SL28CPLD_GPI:
+		config.reg_dat_base = base + GPI_REG_IN;
+		break;
+	default:
+		dev_err(&pdev->dev, "unknown type %d\n", type);
+		return -ENODEV;
+	}
+
+	return PTR_ERR_OR_ZERO(devm_gpio_regmap_register(&pdev->dev, &config));
+}
+
+static const struct of_device_id sl28cpld_gpio_of_match[] = {
+	{ .compatible = "kontron,sl28cpld-gpio", .data = (void *)SL28CPLD_GPIO },
+	{ .compatible = "kontron,sl28cpld-gpi", .data = (void *)SL28CPLD_GPI },
+	{ .compatible = "kontron,sl28cpld-gpo", .data = (void *)SL28CPLD_GPO },
+	{}
+};
+MODULE_DEVICE_TABLE(of, sl28cpld_gpio_of_match);
+
+static struct platform_driver sl28cpld_gpio_driver = {
+	.probe = sl28cpld_gpio_probe,
+	.driver = {
+		.name = "sl28cpld-gpio",
+		.of_match_table = sl28cpld_gpio_of_match,
+	},
+};
+module_platform_driver(sl28cpld_gpio_driver);
+
+MODULE_DESCRIPTION("sl28cpld GPIO Driver");
+MODULE_AUTHOR("Michael Walle <michael@walle.cc>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/gpio-sodaville.c b/drivers/gpio/gpio-sodaville.c
new file mode 100644
index 000000000..aed988e78
--- /dev/null
+++ b/drivers/gpio/gpio-sodaville.c
@@ -0,0 +1,245 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  GPIO interface for Intel Sodaville SoCs.
+ *
+ *  Copyright (c) 2010, 2011 Intel Corporation
+ *
+ *  Author: Hans J. Koch <hjk@linutronix.de>
+ */
+
+#include <linux/errno.h>
+#include <linux/gpio/driver.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/of_irq.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+
+#define DRV_NAME		"sdv_gpio"
+#define SDV_NUM_PUB_GPIOS	12
+#define PCI_DEVICE_ID_SDV_GPIO	0x2e67
+#define GPIO_BAR		0
+
+#define GPOUTR		0x00
+#define GPOER		0x04
+#define GPINR		0x08
+
+#define GPSTR		0x0c
+#define GPIT1R0		0x10
+#define GPIO_INT	0x14
+#define GPIT1R1		0x18
+
+#define GPMUXCTL	0x1c
+
+struct sdv_gpio_chip_data {
+	int irq_base;
+	void __iomem *gpio_pub_base;
+	struct irq_domain *id;
+	struct irq_chip_generic *gc;
+	struct gpio_chip chip;
+};
+
+static int sdv_gpio_pub_set_type(struct irq_data *d, unsigned int type)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	struct sdv_gpio_chip_data *sd = gc->private;
+	void __iomem *type_reg;
+	u32 reg;
+
+	if (d->hwirq < 8)
+		type_reg = sd->gpio_pub_base + GPIT1R0;
+	else
+		type_reg = sd->gpio_pub_base + GPIT1R1;
+
+	reg = readl(type_reg);
+
+	switch (type) {
+	case IRQ_TYPE_LEVEL_HIGH:
+		reg &= ~BIT(4 * (d->hwirq % 8));
+		break;
+
+	case IRQ_TYPE_LEVEL_LOW:
+		reg |= BIT(4 * (d->hwirq % 8));
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	writel(reg, type_reg);
+	return 0;
+}
+
+static irqreturn_t sdv_gpio_pub_irq_handler(int irq, void *data)
+{
+	struct sdv_gpio_chip_data *sd = data;
+	unsigned long irq_stat = readl(sd->gpio_pub_base + GPSTR);
+	int irq_bit;
+
+	irq_stat &= readl(sd->gpio_pub_base + GPIO_INT);
+	if (!irq_stat)
+		return IRQ_NONE;
+
+	for_each_set_bit(irq_bit, &irq_stat, 32)
+		generic_handle_irq(irq_find_mapping(sd->id, irq_bit));
+
+	return IRQ_HANDLED;
+}
+
+static int sdv_xlate(struct irq_domain *h, struct device_node *node,
+		const u32 *intspec, u32 intsize, irq_hw_number_t *out_hwirq,
+		u32 *out_type)
+{
+	u32 line, type;
+
+	if (node != irq_domain_get_of_node(h))
+		return -EINVAL;
+
+	if (intsize < 2)
+		return -EINVAL;
+
+	line = *intspec;
+	*out_hwirq = line;
+
+	intspec++;
+	type = *intspec;
+
+	switch (type) {
+	case IRQ_TYPE_LEVEL_LOW:
+	case IRQ_TYPE_LEVEL_HIGH:
+		*out_type = type;
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static const struct irq_domain_ops irq_domain_sdv_ops = {
+	.xlate = sdv_xlate,
+};
+
+static int sdv_register_irqsupport(struct sdv_gpio_chip_data *sd,
+		struct pci_dev *pdev)
+{
+	struct irq_chip_type *ct;
+	int ret;
+
+	sd->irq_base = devm_irq_alloc_descs(&pdev->dev, -1, 0,
+					    SDV_NUM_PUB_GPIOS, -1);
+	if (sd->irq_base < 0)
+		return sd->irq_base;
+
+	/* mask + ACK all interrupt sources */
+	writel(0, sd->gpio_pub_base + GPIO_INT);
+	writel((1 << 11) - 1, sd->gpio_pub_base + GPSTR);
+
+	ret = devm_request_irq(&pdev->dev, pdev->irq,
+			       sdv_gpio_pub_irq_handler, IRQF_SHARED,
+			       "sdv_gpio", sd);
+	if (ret)
+		return ret;
+
+	/*
+	 * This gpio irq controller latches level irqs. Testing shows that if
+	 * we unmask & ACK the IRQ before the source of the interrupt is gone
+	 * then the interrupt is active again.
+	 */
+	sd->gc = devm_irq_alloc_generic_chip(&pdev->dev, "sdv-gpio", 1,
+					     sd->irq_base,
+					     sd->gpio_pub_base,
+					     handle_fasteoi_irq);
+	if (!sd->gc)
+		return -ENOMEM;
+
+	sd->gc->private = sd;
+	ct = sd->gc->chip_types;
+	ct->type = IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW;
+	ct->regs.eoi = GPSTR;
+	ct->regs.mask = GPIO_INT;
+	ct->chip.irq_mask = irq_gc_mask_clr_bit;
+	ct->chip.irq_unmask = irq_gc_mask_set_bit;
+	ct->chip.irq_eoi = irq_gc_eoi;
+	ct->chip.irq_set_type = sdv_gpio_pub_set_type;
+
+	irq_setup_generic_chip(sd->gc, IRQ_MSK(SDV_NUM_PUB_GPIOS),
+			IRQ_GC_INIT_MASK_CACHE, IRQ_NOREQUEST,
+			IRQ_LEVEL | IRQ_NOPROBE);
+
+	sd->id = irq_domain_add_legacy(pdev->dev.of_node, SDV_NUM_PUB_GPIOS,
+				sd->irq_base, 0, &irq_domain_sdv_ops, sd);
+	if (!sd->id)
+		return -ENODEV;
+
+	return 0;
+}
+
+static int sdv_gpio_probe(struct pci_dev *pdev,
+					const struct pci_device_id *pci_id)
+{
+	struct sdv_gpio_chip_data *sd;
+	int ret;
+	u32 mux_val;
+
+	sd = devm_kzalloc(&pdev->dev, sizeof(*sd), GFP_KERNEL);
+	if (!sd)
+		return -ENOMEM;
+
+	ret = pcim_enable_device(pdev);
+	if (ret) {
+		dev_err(&pdev->dev, "can't enable device.\n");
+		return ret;
+	}
+
+	ret = pcim_iomap_regions(pdev, 1 << GPIO_BAR, DRV_NAME);
+	if (ret) {
+		dev_err(&pdev->dev, "can't alloc PCI BAR #%d\n", GPIO_BAR);
+		return ret;
+	}
+
+	sd->gpio_pub_base = pcim_iomap_table(pdev)[GPIO_BAR];
+
+	ret = of_property_read_u32(pdev->dev.of_node, "intel,muxctl", &mux_val);
+	if (!ret)
+		writel(mux_val, sd->gpio_pub_base + GPMUXCTL);
+
+	ret = bgpio_init(&sd->chip, &pdev->dev, 4,
+			sd->gpio_pub_base + GPINR, sd->gpio_pub_base + GPOUTR,
+			NULL, sd->gpio_pub_base + GPOER, NULL, 0);
+	if (ret)
+		return ret;
+
+	sd->chip.ngpio = SDV_NUM_PUB_GPIOS;
+
+	ret = devm_gpiochip_add_data(&pdev->dev, &sd->chip, sd);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "gpiochip_add() failed.\n");
+		return ret;
+	}
+
+	ret = sdv_register_irqsupport(sd, pdev);
+	if (ret)
+		return ret;
+
+	pci_set_drvdata(pdev, sd);
+	dev_info(&pdev->dev, "Sodaville GPIO driver registered.\n");
+	return 0;
+}
+
+static const struct pci_device_id sdv_gpio_pci_ids[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_SDV_GPIO) },
+	{ 0, },
+};
+
+static struct pci_driver sdv_gpio_driver = {
+	.driver = {
+		.suppress_bind_attrs = true,
+	},
+	.name = DRV_NAME,
+	.id_table = sdv_gpio_pci_ids,
+	.probe = sdv_gpio_probe,
+};
+builtin_pci_driver(sdv_gpio_driver);
diff --git a/drivers/gpio/gpio-spear-spics.c b/drivers/gpio/gpio-spear-spics.c
new file mode 100644
index 000000000..6eca531b7
--- /dev/null
+++ b/drivers/gpio/gpio-spear-spics.c
@@ -0,0 +1,197 @@
+/*
+ * SPEAr platform SPI chipselect abstraction over gpiolib
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Shiraz Hashim <shiraz.linux.kernel@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/err.h>
+#include <linux/gpio/driver.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+
+/* maximum chipselects */
+#define NUM_OF_GPIO	4
+
+/*
+ * Provision is available on some SPEAr SoCs to control ARM PL022 spi cs
+ * through system registers. This register lies outside spi (pl022)
+ * address space into system registers.
+ *
+ * It provides control for spi chip select lines so that any chipselect
+ * (out of 4 possible chipselects in pl022) can be made low to select
+ * the particular slave.
+ */
+
+/**
+ * struct spear_spics - represents spi chip select control
+ * @base: base address
+ * @perip_cfg: configuration register
+ * @sw_enable_bit: bit to enable s/w control over chipselects
+ * @cs_value_bit: bit to program high or low chipselect
+ * @cs_enable_mask: mask to select bits required to select chipselect
+ * @cs_enable_shift: bit pos of cs_enable_mask
+ * @use_count: use count of a spi controller cs lines
+ * @last_off: stores last offset caller of set_value()
+ * @chip: gpio_chip abstraction
+ */
+struct spear_spics {
+	void __iomem		*base;
+	u32			perip_cfg;
+	u32			sw_enable_bit;
+	u32			cs_value_bit;
+	u32			cs_enable_mask;
+	u32			cs_enable_shift;
+	unsigned long		use_count;
+	int			last_off;
+	struct gpio_chip	chip;
+};
+
+/* gpio framework specific routines */
+static int spics_get_value(struct gpio_chip *chip, unsigned offset)
+{
+	return -ENXIO;
+}
+
+static void spics_set_value(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct spear_spics *spics = gpiochip_get_data(chip);
+	u32 tmp;
+
+	/* select chip select from register */
+	tmp = readl_relaxed(spics->base + spics->perip_cfg);
+	if (spics->last_off != offset) {
+		spics->last_off = offset;
+		tmp &= ~(spics->cs_enable_mask << spics->cs_enable_shift);
+		tmp |= offset << spics->cs_enable_shift;
+	}
+
+	/* toggle chip select line */
+	tmp &= ~(0x1 << spics->cs_value_bit);
+	tmp |= value << spics->cs_value_bit;
+	writel_relaxed(tmp, spics->base + spics->perip_cfg);
+}
+
+static int spics_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	return -ENXIO;
+}
+
+static int spics_direction_output(struct gpio_chip *chip, unsigned offset,
+		int value)
+{
+	spics_set_value(chip, offset, value);
+	return 0;
+}
+
+static int spics_request(struct gpio_chip *chip, unsigned offset)
+{
+	struct spear_spics *spics = gpiochip_get_data(chip);
+	u32 tmp;
+
+	if (!spics->use_count++) {
+		tmp = readl_relaxed(spics->base + spics->perip_cfg);
+		tmp |= 0x1 << spics->sw_enable_bit;
+		tmp |= 0x1 << spics->cs_value_bit;
+		writel_relaxed(tmp, spics->base + spics->perip_cfg);
+	}
+
+	return 0;
+}
+
+static void spics_free(struct gpio_chip *chip, unsigned offset)
+{
+	struct spear_spics *spics = gpiochip_get_data(chip);
+	u32 tmp;
+
+	if (!--spics->use_count) {
+		tmp = readl_relaxed(spics->base + spics->perip_cfg);
+		tmp &= ~(0x1 << spics->sw_enable_bit);
+		writel_relaxed(tmp, spics->base + spics->perip_cfg);
+	}
+}
+
+static int spics_gpio_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct spear_spics *spics;
+	int ret;
+
+	spics = devm_kzalloc(&pdev->dev, sizeof(*spics), GFP_KERNEL);
+	if (!spics)
+		return -ENOMEM;
+
+	spics->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(spics->base))
+		return PTR_ERR(spics->base);
+
+	if (of_property_read_u32(np, "st-spics,peripcfg-reg",
+				&spics->perip_cfg))
+		goto err_dt_data;
+	if (of_property_read_u32(np, "st-spics,sw-enable-bit",
+				&spics->sw_enable_bit))
+		goto err_dt_data;
+	if (of_property_read_u32(np, "st-spics,cs-value-bit",
+				&spics->cs_value_bit))
+		goto err_dt_data;
+	if (of_property_read_u32(np, "st-spics,cs-enable-mask",
+				&spics->cs_enable_mask))
+		goto err_dt_data;
+	if (of_property_read_u32(np, "st-spics,cs-enable-shift",
+				&spics->cs_enable_shift))
+		goto err_dt_data;
+
+	platform_set_drvdata(pdev, spics);
+
+	spics->chip.ngpio = NUM_OF_GPIO;
+	spics->chip.base = -1;
+	spics->chip.request = spics_request;
+	spics->chip.free = spics_free;
+	spics->chip.direction_input = spics_direction_input;
+	spics->chip.direction_output = spics_direction_output;
+	spics->chip.get = spics_get_value;
+	spics->chip.set = spics_set_value;
+	spics->chip.label = dev_name(&pdev->dev);
+	spics->chip.parent = &pdev->dev;
+	spics->chip.owner = THIS_MODULE;
+	spics->last_off = -1;
+
+	ret = devm_gpiochip_add_data(&pdev->dev, &spics->chip, spics);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to add gpio chip\n");
+		return ret;
+	}
+
+	dev_info(&pdev->dev, "spear spics registered\n");
+	return 0;
+
+err_dt_data:
+	dev_err(&pdev->dev, "DT probe failed\n");
+	return -EINVAL;
+}
+
+static const struct of_device_id spics_gpio_of_match[] = {
+	{ .compatible = "st,spear-spics-gpio" },
+	{}
+};
+
+static struct platform_driver spics_gpio_driver = {
+	.probe = spics_gpio_probe,
+	.driver = {
+		.name = "spear-spics-gpio",
+		.of_match_table = spics_gpio_of_match,
+	},
+};
+
+static int __init spics_gpio_init(void)
+{
+	return platform_driver_register(&spics_gpio_driver);
+}
+subsys_initcall(spics_gpio_init);
diff --git a/drivers/gpio/gpio-sprd.c b/drivers/gpio/gpio-sprd.c
new file mode 100644
index 000000000..36ea8a3bd
--- /dev/null
+++ b/drivers/gpio/gpio-sprd.c
@@ -0,0 +1,289 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Spreadtrum Communications Inc.
+ * Copyright (C) 2018 Linaro Ltd.
+ */
+
+#include <linux/bitops.h>
+#include <linux/gpio/driver.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+
+/* GPIO registers definition */
+#define SPRD_GPIO_DATA		0x0
+#define SPRD_GPIO_DMSK		0x4
+#define SPRD_GPIO_DIR		0x8
+#define SPRD_GPIO_IS		0xc
+#define SPRD_GPIO_IBE		0x10
+#define SPRD_GPIO_IEV		0x14
+#define SPRD_GPIO_IE		0x18
+#define SPRD_GPIO_RIS		0x1c
+#define SPRD_GPIO_MIS		0x20
+#define SPRD_GPIO_IC		0x24
+#define SPRD_GPIO_INEN		0x28
+
+/* We have 16 banks GPIOs and each bank contain 16 GPIOs */
+#define SPRD_GPIO_BANK_NR	16
+#define SPRD_GPIO_NR		256
+#define SPRD_GPIO_BANK_SIZE	0x80
+#define SPRD_GPIO_BANK_MASK	GENMASK(15, 0)
+#define SPRD_GPIO_BIT(x)	((x) & (SPRD_GPIO_BANK_NR - 1))
+
+struct sprd_gpio {
+	struct gpio_chip chip;
+	void __iomem *base;
+	spinlock_t lock;
+	int irq;
+};
+
+static inline void __iomem *sprd_gpio_bank_base(struct sprd_gpio *sprd_gpio,
+						unsigned int bank)
+{
+	return sprd_gpio->base + SPRD_GPIO_BANK_SIZE * bank;
+}
+
+static void sprd_gpio_update(struct gpio_chip *chip, unsigned int offset,
+			     u16 reg, int val)
+{
+	struct sprd_gpio *sprd_gpio = gpiochip_get_data(chip);
+	void __iomem *base = sprd_gpio_bank_base(sprd_gpio,
+						 offset / SPRD_GPIO_BANK_NR);
+	unsigned long flags;
+	u32 tmp;
+
+	spin_lock_irqsave(&sprd_gpio->lock, flags);
+	tmp = readl_relaxed(base + reg);
+
+	if (val)
+		tmp |= BIT(SPRD_GPIO_BIT(offset));
+	else
+		tmp &= ~BIT(SPRD_GPIO_BIT(offset));
+
+	writel_relaxed(tmp, base + reg);
+	spin_unlock_irqrestore(&sprd_gpio->lock, flags);
+}
+
+static int sprd_gpio_read(struct gpio_chip *chip, unsigned int offset, u16 reg)
+{
+	struct sprd_gpio *sprd_gpio = gpiochip_get_data(chip);
+	void __iomem *base = sprd_gpio_bank_base(sprd_gpio,
+						 offset / SPRD_GPIO_BANK_NR);
+
+	return !!(readl_relaxed(base + reg) & BIT(SPRD_GPIO_BIT(offset)));
+}
+
+static int sprd_gpio_request(struct gpio_chip *chip, unsigned int offset)
+{
+	sprd_gpio_update(chip, offset, SPRD_GPIO_DMSK, 1);
+	return 0;
+}
+
+static void sprd_gpio_free(struct gpio_chip *chip, unsigned int offset)
+{
+	sprd_gpio_update(chip, offset, SPRD_GPIO_DMSK, 0);
+}
+
+static int sprd_gpio_direction_input(struct gpio_chip *chip,
+				     unsigned int offset)
+{
+	sprd_gpio_update(chip, offset, SPRD_GPIO_DIR, 0);
+	sprd_gpio_update(chip, offset, SPRD_GPIO_INEN, 1);
+	return 0;
+}
+
+static int sprd_gpio_direction_output(struct gpio_chip *chip,
+				      unsigned int offset, int value)
+{
+	sprd_gpio_update(chip, offset, SPRD_GPIO_DIR, 1);
+	sprd_gpio_update(chip, offset, SPRD_GPIO_INEN, 0);
+	sprd_gpio_update(chip, offset, SPRD_GPIO_DATA, value);
+	return 0;
+}
+
+static int sprd_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+	return sprd_gpio_read(chip, offset, SPRD_GPIO_DATA);
+}
+
+static void sprd_gpio_set(struct gpio_chip *chip, unsigned int offset,
+			  int value)
+{
+	sprd_gpio_update(chip, offset, SPRD_GPIO_DATA, value);
+}
+
+static void sprd_gpio_irq_mask(struct irq_data *data)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+	u32 offset = irqd_to_hwirq(data);
+
+	sprd_gpio_update(chip, offset, SPRD_GPIO_IE, 0);
+}
+
+static void sprd_gpio_irq_ack(struct irq_data *data)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+	u32 offset = irqd_to_hwirq(data);
+
+	sprd_gpio_update(chip, offset, SPRD_GPIO_IC, 1);
+}
+
+static void sprd_gpio_irq_unmask(struct irq_data *data)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+	u32 offset = irqd_to_hwirq(data);
+
+	sprd_gpio_update(chip, offset, SPRD_GPIO_IE, 1);
+}
+
+static int sprd_gpio_irq_set_type(struct irq_data *data,
+				  unsigned int flow_type)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+	u32 offset = irqd_to_hwirq(data);
+
+	switch (flow_type) {
+	case IRQ_TYPE_EDGE_RISING:
+		sprd_gpio_update(chip, offset, SPRD_GPIO_IS, 0);
+		sprd_gpio_update(chip, offset, SPRD_GPIO_IBE, 0);
+		sprd_gpio_update(chip, offset, SPRD_GPIO_IEV, 1);
+		sprd_gpio_update(chip, offset, SPRD_GPIO_IC, 1);
+		irq_set_handler_locked(data, handle_edge_irq);
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		sprd_gpio_update(chip, offset, SPRD_GPIO_IS, 0);
+		sprd_gpio_update(chip, offset, SPRD_GPIO_IBE, 0);
+		sprd_gpio_update(chip, offset, SPRD_GPIO_IEV, 0);
+		sprd_gpio_update(chip, offset, SPRD_GPIO_IC, 1);
+		irq_set_handler_locked(data, handle_edge_irq);
+		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		sprd_gpio_update(chip, offset, SPRD_GPIO_IS, 0);
+		sprd_gpio_update(chip, offset, SPRD_GPIO_IBE, 1);
+		sprd_gpio_update(chip, offset, SPRD_GPIO_IC, 1);
+		irq_set_handler_locked(data, handle_edge_irq);
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		sprd_gpio_update(chip, offset, SPRD_GPIO_IS, 1);
+		sprd_gpio_update(chip, offset, SPRD_GPIO_IBE, 0);
+		sprd_gpio_update(chip, offset, SPRD_GPIO_IEV, 1);
+		irq_set_handler_locked(data, handle_level_irq);
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		sprd_gpio_update(chip, offset, SPRD_GPIO_IS, 1);
+		sprd_gpio_update(chip, offset, SPRD_GPIO_IBE, 0);
+		sprd_gpio_update(chip, offset, SPRD_GPIO_IEV, 0);
+		irq_set_handler_locked(data, handle_level_irq);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void sprd_gpio_irq_handler(struct irq_desc *desc)
+{
+	struct gpio_chip *chip = irq_desc_get_handler_data(desc);
+	struct irq_chip *ic = irq_desc_get_chip(desc);
+	struct sprd_gpio *sprd_gpio = gpiochip_get_data(chip);
+	u32 bank, n, girq;
+
+	chained_irq_enter(ic, desc);
+
+	for (bank = 0; bank * SPRD_GPIO_BANK_NR < chip->ngpio; bank++) {
+		void __iomem *base = sprd_gpio_bank_base(sprd_gpio, bank);
+		unsigned long reg = readl_relaxed(base + SPRD_GPIO_MIS) &
+			SPRD_GPIO_BANK_MASK;
+
+		for_each_set_bit(n, &reg, SPRD_GPIO_BANK_NR) {
+			girq = irq_find_mapping(chip->irq.domain,
+						bank * SPRD_GPIO_BANK_NR + n);
+
+			generic_handle_irq(girq);
+		}
+
+	}
+	chained_irq_exit(ic, desc);
+}
+
+static struct irq_chip sprd_gpio_irqchip = {
+	.name = "sprd-gpio",
+	.irq_ack = sprd_gpio_irq_ack,
+	.irq_mask = sprd_gpio_irq_mask,
+	.irq_unmask = sprd_gpio_irq_unmask,
+	.irq_set_type = sprd_gpio_irq_set_type,
+	.flags = IRQCHIP_SKIP_SET_WAKE,
+};
+
+static int sprd_gpio_probe(struct platform_device *pdev)
+{
+	struct gpio_irq_chip *irq;
+	struct sprd_gpio *sprd_gpio;
+	int ret;
+
+	sprd_gpio = devm_kzalloc(&pdev->dev, sizeof(*sprd_gpio), GFP_KERNEL);
+	if (!sprd_gpio)
+		return -ENOMEM;
+
+	sprd_gpio->irq = platform_get_irq(pdev, 0);
+	if (sprd_gpio->irq < 0)
+		return sprd_gpio->irq;
+
+	sprd_gpio->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(sprd_gpio->base))
+		return PTR_ERR(sprd_gpio->base);
+
+	spin_lock_init(&sprd_gpio->lock);
+
+	sprd_gpio->chip.label = dev_name(&pdev->dev);
+	sprd_gpio->chip.ngpio = SPRD_GPIO_NR;
+	sprd_gpio->chip.base = -1;
+	sprd_gpio->chip.parent = &pdev->dev;
+	sprd_gpio->chip.of_node = pdev->dev.of_node;
+	sprd_gpio->chip.request = sprd_gpio_request;
+	sprd_gpio->chip.free = sprd_gpio_free;
+	sprd_gpio->chip.get = sprd_gpio_get;
+	sprd_gpio->chip.set = sprd_gpio_set;
+	sprd_gpio->chip.direction_input = sprd_gpio_direction_input;
+	sprd_gpio->chip.direction_output = sprd_gpio_direction_output;
+
+	irq = &sprd_gpio->chip.irq;
+	irq->chip = &sprd_gpio_irqchip;
+	irq->handler = handle_bad_irq;
+	irq->default_type = IRQ_TYPE_NONE;
+	irq->parent_handler = sprd_gpio_irq_handler;
+	irq->parent_handler_data = sprd_gpio;
+	irq->num_parents = 1;
+	irq->parents = &sprd_gpio->irq;
+
+	ret = devm_gpiochip_add_data(&pdev->dev, &sprd_gpio->chip, sprd_gpio);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Could not register gpiochip %d\n", ret);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, sprd_gpio);
+	return 0;
+}
+
+static const struct of_device_id sprd_gpio_of_match[] = {
+	{ .compatible = "sprd,sc9860-gpio", },
+	{ /* end of list */ }
+};
+MODULE_DEVICE_TABLE(of, sprd_gpio_of_match);
+
+static struct platform_driver sprd_gpio_driver = {
+	.probe = sprd_gpio_probe,
+	.driver = {
+		.name = "sprd-gpio",
+		.of_match_table	= sprd_gpio_of_match,
+	},
+};
+
+module_platform_driver_probe(sprd_gpio_driver, sprd_gpio_probe);
+
+MODULE_DESCRIPTION("Spreadtrum GPIO driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-sta2x11.c b/drivers/gpio/gpio-sta2x11.c
new file mode 100644
index 000000000..a74bb97a4
--- /dev/null
+++ b/drivers/gpio/gpio-sta2x11.c
@@ -0,0 +1,419 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * STMicroelectronics ConneXt (STA2X11) GPIO driver
+ *
+ * Copyright 2012 ST Microelectronics (Alessandro Rubini)
+ * Based on gpio-ml-ioh.c, Copyright 2010 OKI Semiconductors Ltd.
+ * Also based on previous sta2x11 work, Copyright 2011 Wind River Systems, Inc.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/gpio/driver.h>
+#include <linux/bitops.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/sta2x11-mfd.h>
+
+struct gsta_regs {
+	u32 dat;		/* 0x00 */
+	u32 dats;
+	u32 datc;
+	u32 pdis;
+	u32 dir;		/* 0x10 */
+	u32 dirs;
+	u32 dirc;
+	u32 unused_1c;
+	u32 afsela;		/* 0x20 */
+	u32 unused_24[7];
+	u32 rimsc;		/* 0x40 */
+	u32 fimsc;
+	u32 is;
+	u32 ic;
+};
+
+struct gsta_gpio {
+	spinlock_t			lock;
+	struct device			*dev;
+	void __iomem			*reg_base;
+	struct gsta_regs __iomem	*regs[GSTA_NR_BLOCKS];
+	struct gpio_chip		gpio;
+	int				irq_base;
+	/* FIXME: save the whole config here (AF, ...) */
+	unsigned			irq_type[GSTA_NR_GPIO];
+};
+
+/*
+ * gpio methods
+ */
+
+static void gsta_gpio_set(struct gpio_chip *gpio, unsigned nr, int val)
+{
+	struct gsta_gpio *chip = gpiochip_get_data(gpio);
+	struct gsta_regs __iomem *regs = chip->regs[nr / GSTA_GPIO_PER_BLOCK];
+	u32 bit = BIT(nr % GSTA_GPIO_PER_BLOCK);
+
+	if (val)
+		writel(bit, &regs->dats);
+	else
+		writel(bit, &regs->datc);
+}
+
+static int gsta_gpio_get(struct gpio_chip *gpio, unsigned nr)
+{
+	struct gsta_gpio *chip = gpiochip_get_data(gpio);
+	struct gsta_regs __iomem *regs = chip->regs[nr / GSTA_GPIO_PER_BLOCK];
+	u32 bit = BIT(nr % GSTA_GPIO_PER_BLOCK);
+
+	return !!(readl(&regs->dat) & bit);
+}
+
+static int gsta_gpio_direction_output(struct gpio_chip *gpio, unsigned nr,
+				      int val)
+{
+	struct gsta_gpio *chip = gpiochip_get_data(gpio);
+	struct gsta_regs __iomem *regs = chip->regs[nr / GSTA_GPIO_PER_BLOCK];
+	u32 bit = BIT(nr % GSTA_GPIO_PER_BLOCK);
+
+	writel(bit, &regs->dirs);
+	/* Data register after direction, otherwise pullup/down is selected */
+	if (val)
+		writel(bit, &regs->dats);
+	else
+		writel(bit, &regs->datc);
+	return 0;
+}
+
+static int gsta_gpio_direction_input(struct gpio_chip *gpio, unsigned nr)
+{
+	struct gsta_gpio *chip = gpiochip_get_data(gpio);
+	struct gsta_regs __iomem *regs = chip->regs[nr / GSTA_GPIO_PER_BLOCK];
+	u32 bit = BIT(nr % GSTA_GPIO_PER_BLOCK);
+
+	writel(bit, &regs->dirc);
+	return 0;
+}
+
+static int gsta_gpio_to_irq(struct gpio_chip *gpio, unsigned offset)
+{
+	struct gsta_gpio *chip = gpiochip_get_data(gpio);
+	return chip->irq_base + offset;
+}
+
+static void gsta_gpio_setup(struct gsta_gpio *chip) /* called from probe */
+{
+	struct gpio_chip *gpio = &chip->gpio;
+
+	/*
+	 * ARCH_NR_GPIOS is currently 256 and dynamic allocation starts
+	 * from the end. However, for compatibility, we need the first
+	 * ConneXt device to start from gpio 0: it's the main chipset
+	 * on most boards so documents and drivers assume gpio0..gpio127
+	 */
+	static int gpio_base;
+
+	gpio->label = dev_name(chip->dev);
+	gpio->owner = THIS_MODULE;
+	gpio->direction_input = gsta_gpio_direction_input;
+	gpio->get = gsta_gpio_get;
+	gpio->direction_output = gsta_gpio_direction_output;
+	gpio->set = gsta_gpio_set;
+	gpio->dbg_show = NULL;
+	gpio->base = gpio_base;
+	gpio->ngpio = GSTA_NR_GPIO;
+	gpio->can_sleep = false;
+	gpio->to_irq = gsta_gpio_to_irq;
+
+	/*
+	 * After the first device, turn to dynamic gpio numbers.
+	 * For example, with ARCH_NR_GPIOS = 256 we can fit two cards
+	 */
+	if (!gpio_base)
+		gpio_base = -1;
+}
+
+/*
+ * Special method: alternate functions and pullup/pulldown. This is only
+ * invoked on startup to configure gpio's according to platform data.
+ * FIXME : this functionality shall be managed (and exported to other drivers)
+ * via the pin control subsystem.
+ */
+static void gsta_set_config(struct gsta_gpio *chip, int nr, unsigned cfg)
+{
+	struct gsta_regs __iomem *regs = chip->regs[nr / GSTA_GPIO_PER_BLOCK];
+	unsigned long flags;
+	u32 bit = BIT(nr % GSTA_GPIO_PER_BLOCK);
+	u32 val;
+	int err = 0;
+
+	pr_info("%s: %p %i %i\n", __func__, chip, nr, cfg);
+
+	if (cfg == PINMUX_TYPE_NONE)
+		return;
+
+	/* Alternate function or not? */
+	spin_lock_irqsave(&chip->lock, flags);
+	val = readl(&regs->afsela);
+	if (cfg == PINMUX_TYPE_FUNCTION)
+		val |= bit;
+	else
+		val &= ~bit;
+	writel(val | bit, &regs->afsela);
+	if (cfg == PINMUX_TYPE_FUNCTION) {
+		spin_unlock_irqrestore(&chip->lock, flags);
+		return;
+	}
+
+	/* not alternate function: set details */
+	switch (cfg) {
+	case PINMUX_TYPE_OUTPUT_LOW:
+		writel(bit, &regs->dirs);
+		writel(bit, &regs->datc);
+		break;
+	case PINMUX_TYPE_OUTPUT_HIGH:
+		writel(bit, &regs->dirs);
+		writel(bit, &regs->dats);
+		break;
+	case PINMUX_TYPE_INPUT:
+		writel(bit, &regs->dirc);
+		val = readl(&regs->pdis) | bit;
+		writel(val, &regs->pdis);
+		break;
+	case PINMUX_TYPE_INPUT_PULLUP:
+		writel(bit, &regs->dirc);
+		val = readl(&regs->pdis) & ~bit;
+		writel(val, &regs->pdis);
+		writel(bit, &regs->dats);
+		break;
+	case PINMUX_TYPE_INPUT_PULLDOWN:
+		writel(bit, &regs->dirc);
+		val = readl(&regs->pdis) & ~bit;
+		writel(val, &regs->pdis);
+		writel(bit, &regs->datc);
+		break;
+	default:
+		err = 1;
+	}
+	spin_unlock_irqrestore(&chip->lock, flags);
+	if (err)
+		pr_err("%s: chip %p, pin %i, cfg %i is invalid\n",
+		       __func__, chip, nr, cfg);
+}
+
+/*
+ * Irq methods
+ */
+
+static void gsta_irq_disable(struct irq_data *data)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(data);
+	struct gsta_gpio *chip = gc->private;
+	int nr = data->irq - chip->irq_base;
+	struct gsta_regs __iomem *regs = chip->regs[nr / GSTA_GPIO_PER_BLOCK];
+	u32 bit = BIT(nr % GSTA_GPIO_PER_BLOCK);
+	u32 val;
+	unsigned long flags;
+
+	spin_lock_irqsave(&chip->lock, flags);
+	if (chip->irq_type[nr] & IRQ_TYPE_EDGE_RISING) {
+		val = readl(&regs->rimsc) & ~bit;
+		writel(val, &regs->rimsc);
+	}
+	if (chip->irq_type[nr] & IRQ_TYPE_EDGE_FALLING) {
+		val = readl(&regs->fimsc) & ~bit;
+		writel(val, &regs->fimsc);
+	}
+	spin_unlock_irqrestore(&chip->lock, flags);
+	return;
+}
+
+static void gsta_irq_enable(struct irq_data *data)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(data);
+	struct gsta_gpio *chip = gc->private;
+	int nr = data->irq - chip->irq_base;
+	struct gsta_regs __iomem *regs = chip->regs[nr / GSTA_GPIO_PER_BLOCK];
+	u32 bit = BIT(nr % GSTA_GPIO_PER_BLOCK);
+	u32 val;
+	int type;
+	unsigned long flags;
+
+	type = chip->irq_type[nr];
+
+	spin_lock_irqsave(&chip->lock, flags);
+	val = readl(&regs->rimsc);
+	if (type & IRQ_TYPE_EDGE_RISING)
+		writel(val | bit, &regs->rimsc);
+	else
+		writel(val & ~bit, &regs->rimsc);
+	val = readl(&regs->rimsc);
+	if (type & IRQ_TYPE_EDGE_FALLING)
+		writel(val | bit, &regs->fimsc);
+	else
+		writel(val & ~bit, &regs->fimsc);
+	spin_unlock_irqrestore(&chip->lock, flags);
+	return;
+}
+
+static int gsta_irq_type(struct irq_data *d, unsigned int type)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	struct gsta_gpio *chip = gc->private;
+	int nr = d->irq - chip->irq_base;
+
+	/* We only support edge interrupts */
+	if (!(type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))) {
+		pr_debug("%s: unsupported type 0x%x\n", __func__, type);
+		return -EINVAL;
+	}
+
+	chip->irq_type[nr] = type; /* used for enable/disable */
+
+	gsta_irq_enable(d);
+	return 0;
+}
+
+static irqreturn_t gsta_gpio_handler(int irq, void *dev_id)
+{
+	struct gsta_gpio *chip = dev_id;
+	struct gsta_regs __iomem *regs;
+	u32 is;
+	int i, nr, base;
+	irqreturn_t ret = IRQ_NONE;
+
+	for (i = 0; i < GSTA_NR_BLOCKS; i++) {
+		regs = chip->regs[i];
+		base = chip->irq_base + i * GSTA_GPIO_PER_BLOCK;
+		while ((is = readl(&regs->is))) {
+			nr = __ffs(is);
+			irq = base + nr;
+			generic_handle_irq(irq);
+			writel(1 << nr, &regs->ic);
+			ret = IRQ_HANDLED;
+		}
+	}
+	return ret;
+}
+
+static int gsta_alloc_irq_chip(struct gsta_gpio *chip)
+{
+	struct irq_chip_generic *gc;
+	struct irq_chip_type *ct;
+	int rv;
+
+	gc = devm_irq_alloc_generic_chip(chip->dev, KBUILD_MODNAME, 1,
+					 chip->irq_base,
+					 chip->reg_base, handle_simple_irq);
+	if (!gc)
+		return -ENOMEM;
+
+	gc->private = chip;
+	ct = gc->chip_types;
+
+	ct->chip.irq_set_type = gsta_irq_type;
+	ct->chip.irq_disable = gsta_irq_disable;
+	ct->chip.irq_enable = gsta_irq_enable;
+
+	/* FIXME: this makes at most 32 interrupts. Request 0 by now */
+	rv = devm_irq_setup_generic_chip(chip->dev, gc,
+					 0 /* IRQ_MSK(GSTA_GPIO_PER_BLOCK) */,
+					 0, IRQ_NOREQUEST | IRQ_NOPROBE, 0);
+	if (rv)
+		return rv;
+
+	/* Set up all all 128 interrupts: code from setup_generic_chip */
+	{
+		struct irq_chip_type *ct = gc->chip_types;
+		int i, j;
+		for (j = 0; j < GSTA_NR_GPIO; j++) {
+			i = chip->irq_base + j;
+			irq_set_chip_and_handler(i, &ct->chip, ct->handler);
+			irq_set_chip_data(i, gc);
+			irq_clear_status_flags(i, IRQ_NOREQUEST | IRQ_NOPROBE);
+		}
+		gc->irq_cnt = i - gc->irq_base;
+	}
+
+	return 0;
+}
+
+/* The platform device used here is instantiated by the MFD device */
+static int gsta_probe(struct platform_device *dev)
+{
+	int i, err;
+	struct pci_dev *pdev;
+	struct sta2x11_gpio_pdata *gpio_pdata;
+	struct gsta_gpio *chip;
+
+	pdev = *(struct pci_dev **)dev_get_platdata(&dev->dev);
+	gpio_pdata = dev_get_platdata(&pdev->dev);
+
+	if (gpio_pdata == NULL)
+		dev_err(&dev->dev, "no gpio config\n");
+	pr_debug("gpio config: %p\n", gpio_pdata);
+
+	chip = devm_kzalloc(&dev->dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+	chip->dev = &dev->dev;
+	chip->reg_base = devm_platform_ioremap_resource(dev, 0);
+	if (IS_ERR(chip->reg_base))
+		return PTR_ERR(chip->reg_base);
+
+	for (i = 0; i < GSTA_NR_BLOCKS; i++) {
+		chip->regs[i] = chip->reg_base + i * 4096;
+		/* disable all irqs */
+		writel(0, &chip->regs[i]->rimsc);
+		writel(0, &chip->regs[i]->fimsc);
+		writel(~0, &chip->regs[i]->ic);
+	}
+	spin_lock_init(&chip->lock);
+	gsta_gpio_setup(chip);
+	if (gpio_pdata)
+		for (i = 0; i < GSTA_NR_GPIO; i++)
+			gsta_set_config(chip, i, gpio_pdata->pinconfig[i]);
+
+	/* 384 was used in previous code: be compatible for other drivers */
+	err = devm_irq_alloc_descs(&dev->dev, -1, 384,
+				   GSTA_NR_GPIO, NUMA_NO_NODE);
+	if (err < 0) {
+		dev_warn(&dev->dev, "sta2x11 gpio: Can't get irq base (%i)\n",
+			 -err);
+		return err;
+	}
+	chip->irq_base = err;
+
+	err = gsta_alloc_irq_chip(chip);
+	if (err)
+		return err;
+
+	err = devm_request_irq(&dev->dev, pdev->irq, gsta_gpio_handler,
+			       IRQF_SHARED, KBUILD_MODNAME, chip);
+	if (err < 0) {
+		dev_err(&dev->dev, "sta2x11 gpio: Can't request irq (%i)\n",
+			-err);
+		return err;
+	}
+
+	err = devm_gpiochip_add_data(&dev->dev, &chip->gpio, chip);
+	if (err < 0) {
+		dev_err(&dev->dev, "sta2x11 gpio: Can't register (%i)\n",
+			-err);
+		return err;
+	}
+
+	platform_set_drvdata(dev, chip);
+	return 0;
+}
+
+static struct platform_driver sta2x11_gpio_platform_driver = {
+	.driver = {
+		.name	= "sta2x11-gpio",
+		.suppress_bind_attrs = true,
+	},
+	.probe = gsta_probe,
+};
+builtin_platform_driver(sta2x11_gpio_platform_driver);
diff --git a/drivers/gpio/gpio-stmpe.c b/drivers/gpio/gpio-stmpe.c
new file mode 100644
index 000000000..b0155d600
--- /dev/null
+++ b/drivers/gpio/gpio-stmpe.c
@@ -0,0 +1,555 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/gpio/driver.h>
+#include <linux/interrupt.h>
+#include <linux/of.h>
+#include <linux/mfd/stmpe.h>
+#include <linux/seq_file.h>
+#include <linux/bitops.h>
+
+/*
+ * These registers are modified under the irq bus lock and cached to avoid
+ * unnecessary writes in bus_sync_unlock.
+ */
+enum { REG_RE, REG_FE, REG_IE };
+
+enum { LSB, CSB, MSB };
+
+#define CACHE_NR_REGS	3
+/* No variant has more than 24 GPIOs */
+#define CACHE_NR_BANKS	(24 / 8)
+
+struct stmpe_gpio {
+	struct gpio_chip chip;
+	struct stmpe *stmpe;
+	struct device *dev;
+	struct mutex irq_lock;
+	u32 norequest_mask;
+	/* Caches of interrupt control registers for bus_lock */
+	u8 regs[CACHE_NR_REGS][CACHE_NR_BANKS];
+	u8 oldregs[CACHE_NR_REGS][CACHE_NR_BANKS];
+};
+
+static int stmpe_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip);
+	struct stmpe *stmpe = stmpe_gpio->stmpe;
+	u8 reg = stmpe->regs[STMPE_IDX_GPMR_LSB + (offset / 8)];
+	u8 mask = BIT(offset % 8);
+	int ret;
+
+	ret = stmpe_reg_read(stmpe, reg);
+	if (ret < 0)
+		return ret;
+
+	return !!(ret & mask);
+}
+
+static void stmpe_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
+{
+	struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip);
+	struct stmpe *stmpe = stmpe_gpio->stmpe;
+	int which = val ? STMPE_IDX_GPSR_LSB : STMPE_IDX_GPCR_LSB;
+	u8 reg = stmpe->regs[which + (offset / 8)];
+	u8 mask = BIT(offset % 8);
+
+	/*
+	 * Some variants have single register for gpio set/clear functionality.
+	 * For them we need to write 0 to clear and 1 to set.
+	 */
+	if (stmpe->regs[STMPE_IDX_GPSR_LSB] == stmpe->regs[STMPE_IDX_GPCR_LSB])
+		stmpe_set_bits(stmpe, reg, mask, val ? mask : 0);
+	else
+		stmpe_reg_write(stmpe, reg, mask);
+}
+
+static int stmpe_gpio_get_direction(struct gpio_chip *chip,
+				    unsigned offset)
+{
+	struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip);
+	struct stmpe *stmpe = stmpe_gpio->stmpe;
+	u8 reg = stmpe->regs[STMPE_IDX_GPDR_LSB] - (offset / 8);
+	u8 mask = BIT(offset % 8);
+	int ret;
+
+	ret = stmpe_reg_read(stmpe, reg);
+	if (ret < 0)
+		return ret;
+
+	if (ret & mask)
+		return GPIO_LINE_DIRECTION_OUT;
+
+	return GPIO_LINE_DIRECTION_IN;
+}
+
+static int stmpe_gpio_direction_output(struct gpio_chip *chip,
+					 unsigned offset, int val)
+{
+	struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip);
+	struct stmpe *stmpe = stmpe_gpio->stmpe;
+	u8 reg = stmpe->regs[STMPE_IDX_GPDR_LSB + (offset / 8)];
+	u8 mask = BIT(offset % 8);
+
+	stmpe_gpio_set(chip, offset, val);
+
+	return stmpe_set_bits(stmpe, reg, mask, mask);
+}
+
+static int stmpe_gpio_direction_input(struct gpio_chip *chip,
+					unsigned offset)
+{
+	struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip);
+	struct stmpe *stmpe = stmpe_gpio->stmpe;
+	u8 reg = stmpe->regs[STMPE_IDX_GPDR_LSB + (offset / 8)];
+	u8 mask = BIT(offset % 8);
+
+	return stmpe_set_bits(stmpe, reg, mask, 0);
+}
+
+static int stmpe_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+	struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip);
+	struct stmpe *stmpe = stmpe_gpio->stmpe;
+
+	if (stmpe_gpio->norequest_mask & BIT(offset))
+		return -EINVAL;
+
+	return stmpe_set_altfunc(stmpe, BIT(offset), STMPE_BLOCK_GPIO);
+}
+
+static const struct gpio_chip template_chip = {
+	.label			= "stmpe",
+	.owner			= THIS_MODULE,
+	.get_direction		= stmpe_gpio_get_direction,
+	.direction_input	= stmpe_gpio_direction_input,
+	.get			= stmpe_gpio_get,
+	.direction_output	= stmpe_gpio_direction_output,
+	.set			= stmpe_gpio_set,
+	.request		= stmpe_gpio_request,
+	.can_sleep		= true,
+};
+
+static int stmpe_gpio_irq_set_type(struct irq_data *d, unsigned int type)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc);
+	int offset = d->hwirq;
+	int regoffset = offset / 8;
+	int mask = BIT(offset % 8);
+
+	if (type & IRQ_TYPE_LEVEL_LOW || type & IRQ_TYPE_LEVEL_HIGH)
+		return -EINVAL;
+
+	/* STMPE801 and STMPE 1600 don't have RE and FE registers */
+	if (stmpe_gpio->stmpe->partnum == STMPE801 ||
+	    stmpe_gpio->stmpe->partnum == STMPE1600)
+		return 0;
+
+	if (type & IRQ_TYPE_EDGE_RISING)
+		stmpe_gpio->regs[REG_RE][regoffset] |= mask;
+	else
+		stmpe_gpio->regs[REG_RE][regoffset] &= ~mask;
+
+	if (type & IRQ_TYPE_EDGE_FALLING)
+		stmpe_gpio->regs[REG_FE][regoffset] |= mask;
+	else
+		stmpe_gpio->regs[REG_FE][regoffset] &= ~mask;
+
+	return 0;
+}
+
+static void stmpe_gpio_irq_lock(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc);
+
+	mutex_lock(&stmpe_gpio->irq_lock);
+}
+
+static void stmpe_gpio_irq_sync_unlock(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc);
+	struct stmpe *stmpe = stmpe_gpio->stmpe;
+	int num_banks = DIV_ROUND_UP(stmpe->num_gpios, 8);
+	static const u8 regmap[CACHE_NR_REGS][CACHE_NR_BANKS] = {
+		[REG_RE][LSB] = STMPE_IDX_GPRER_LSB,
+		[REG_RE][CSB] = STMPE_IDX_GPRER_CSB,
+		[REG_RE][MSB] = STMPE_IDX_GPRER_MSB,
+		[REG_FE][LSB] = STMPE_IDX_GPFER_LSB,
+		[REG_FE][CSB] = STMPE_IDX_GPFER_CSB,
+		[REG_FE][MSB] = STMPE_IDX_GPFER_MSB,
+		[REG_IE][LSB] = STMPE_IDX_IEGPIOR_LSB,
+		[REG_IE][CSB] = STMPE_IDX_IEGPIOR_CSB,
+		[REG_IE][MSB] = STMPE_IDX_IEGPIOR_MSB,
+	};
+	int i, j;
+
+	/*
+	 * STMPE1600: to be able to get IRQ from pins,
+	 * a read must be done on GPMR register, or a write in
+	 * GPSR or GPCR registers
+	 */
+	if (stmpe->partnum == STMPE1600) {
+		stmpe_reg_read(stmpe, stmpe->regs[STMPE_IDX_GPMR_LSB]);
+		stmpe_reg_read(stmpe, stmpe->regs[STMPE_IDX_GPMR_CSB]);
+	}
+
+	for (i = 0; i < CACHE_NR_REGS; i++) {
+		/* STMPE801 and STMPE1600 don't have RE and FE registers */
+		if ((stmpe->partnum == STMPE801 ||
+		     stmpe->partnum == STMPE1600) &&
+		     (i != REG_IE))
+			continue;
+
+		for (j = 0; j < num_banks; j++) {
+			u8 old = stmpe_gpio->oldregs[i][j];
+			u8 new = stmpe_gpio->regs[i][j];
+
+			if (new == old)
+				continue;
+
+			stmpe_gpio->oldregs[i][j] = new;
+			stmpe_reg_write(stmpe, stmpe->regs[regmap[i][j]], new);
+		}
+	}
+
+	mutex_unlock(&stmpe_gpio->irq_lock);
+}
+
+static void stmpe_gpio_irq_mask(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc);
+	int offset = d->hwirq;
+	int regoffset = offset / 8;
+	int mask = BIT(offset % 8);
+
+	stmpe_gpio->regs[REG_IE][regoffset] &= ~mask;
+}
+
+static void stmpe_gpio_irq_unmask(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc);
+	int offset = d->hwirq;
+	int regoffset = offset / 8;
+	int mask = BIT(offset % 8);
+
+	stmpe_gpio->regs[REG_IE][regoffset] |= mask;
+}
+
+static void stmpe_dbg_show_one(struct seq_file *s,
+			       struct gpio_chip *gc,
+			       unsigned offset, unsigned gpio)
+{
+	struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc);
+	struct stmpe *stmpe = stmpe_gpio->stmpe;
+	const char *label = gpiochip_is_requested(gc, offset);
+	bool val = !!stmpe_gpio_get(gc, offset);
+	u8 bank = offset / 8;
+	u8 dir_reg = stmpe->regs[STMPE_IDX_GPDR_LSB + bank];
+	u8 mask = BIT(offset % 8);
+	int ret;
+	u8 dir;
+
+	ret = stmpe_reg_read(stmpe, dir_reg);
+	if (ret < 0)
+		return;
+	dir = !!(ret & mask);
+
+	if (dir) {
+		seq_printf(s, " gpio-%-3d (%-20.20s) out %s",
+			   gpio, label ?: "(none)",
+			   val ? "hi" : "lo");
+	} else {
+		u8 edge_det_reg;
+		u8 rise_reg;
+		u8 fall_reg;
+		u8 irqen_reg;
+
+		static const char * const edge_det_values[] = {
+			"edge-inactive",
+			"edge-asserted",
+			"not-supported"
+		};
+		static const char * const rise_values[] = {
+			"no-rising-edge-detection",
+			"rising-edge-detection",
+			"not-supported"
+		};
+		static const char * const fall_values[] = {
+			"no-falling-edge-detection",
+			"falling-edge-detection",
+			"not-supported"
+		};
+		#define NOT_SUPPORTED_IDX 2
+		u8 edge_det = NOT_SUPPORTED_IDX;
+		u8 rise = NOT_SUPPORTED_IDX;
+		u8 fall = NOT_SUPPORTED_IDX;
+		bool irqen;
+
+		switch (stmpe->partnum) {
+		case STMPE610:
+		case STMPE811:
+		case STMPE1601:
+		case STMPE2401:
+		case STMPE2403:
+			edge_det_reg = stmpe->regs[STMPE_IDX_GPEDR_LSB + bank];
+			ret = stmpe_reg_read(stmpe, edge_det_reg);
+			if (ret < 0)
+				return;
+			edge_det = !!(ret & mask);
+			fallthrough;
+		case STMPE1801:
+			rise_reg = stmpe->regs[STMPE_IDX_GPRER_LSB + bank];
+			fall_reg = stmpe->regs[STMPE_IDX_GPFER_LSB + bank];
+
+			ret = stmpe_reg_read(stmpe, rise_reg);
+			if (ret < 0)
+				return;
+			rise = !!(ret & mask);
+			ret = stmpe_reg_read(stmpe, fall_reg);
+			if (ret < 0)
+				return;
+			fall = !!(ret & mask);
+			fallthrough;
+		case STMPE801:
+		case STMPE1600:
+			irqen_reg = stmpe->regs[STMPE_IDX_IEGPIOR_LSB + bank];
+			break;
+
+		default:
+			return;
+		}
+
+		ret = stmpe_reg_read(stmpe, irqen_reg);
+		if (ret < 0)
+			return;
+		irqen = !!(ret & mask);
+
+		seq_printf(s, " gpio-%-3d (%-20.20s) in  %s %13s %13s %25s %25s",
+			   gpio, label ?: "(none)",
+			   val ? "hi" : "lo",
+			   edge_det_values[edge_det],
+			   irqen ? "IRQ-enabled" : "IRQ-disabled",
+			   rise_values[rise],
+			   fall_values[fall]);
+	}
+}
+
+static void stmpe_dbg_show(struct seq_file *s, struct gpio_chip *gc)
+{
+	unsigned i;
+	unsigned gpio = gc->base;
+
+	for (i = 0; i < gc->ngpio; i++, gpio++) {
+		stmpe_dbg_show_one(s, gc, i, gpio);
+		seq_putc(s, '\n');
+	}
+}
+
+static struct irq_chip stmpe_gpio_irq_chip = {
+	.name			= "stmpe-gpio",
+	.irq_bus_lock		= stmpe_gpio_irq_lock,
+	.irq_bus_sync_unlock	= stmpe_gpio_irq_sync_unlock,
+	.irq_mask		= stmpe_gpio_irq_mask,
+	.irq_unmask		= stmpe_gpio_irq_unmask,
+	.irq_set_type		= stmpe_gpio_irq_set_type,
+};
+
+#define MAX_GPIOS 24
+
+static irqreturn_t stmpe_gpio_irq(int irq, void *dev)
+{
+	struct stmpe_gpio *stmpe_gpio = dev;
+	struct stmpe *stmpe = stmpe_gpio->stmpe;
+	u8 statmsbreg;
+	int num_banks = DIV_ROUND_UP(stmpe->num_gpios, 8);
+	u8 status[DIV_ROUND_UP(MAX_GPIOS, 8)];
+	int ret;
+	int i;
+
+	/*
+	 * the stmpe_block_read() call below, imposes to set statmsbreg
+	 * with the register located at the lowest address. As STMPE1600
+	 * variant is the only one which respect registers address's order
+	 * (LSB regs located at lowest address than MSB ones) whereas all
+	 * the others have a registers layout with MSB located before the
+	 * LSB regs.
+	 */
+	if (stmpe->partnum == STMPE1600)
+		statmsbreg = stmpe->regs[STMPE_IDX_ISGPIOR_LSB];
+	else
+		statmsbreg = stmpe->regs[STMPE_IDX_ISGPIOR_MSB];
+
+	ret = stmpe_block_read(stmpe, statmsbreg, num_banks, status);
+	if (ret < 0)
+		return IRQ_NONE;
+
+	for (i = 0; i < num_banks; i++) {
+		int bank = (stmpe_gpio->stmpe->partnum == STMPE1600) ? i :
+			   num_banks - i - 1;
+		unsigned int enabled = stmpe_gpio->regs[REG_IE][bank];
+		unsigned int stat = status[i];
+
+		stat &= enabled;
+		if (!stat)
+			continue;
+
+		while (stat) {
+			int bit = __ffs(stat);
+			int line = bank * 8 + bit;
+			int child_irq = irq_find_mapping(stmpe_gpio->chip.irq.domain,
+							 line);
+
+			handle_nested_irq(child_irq);
+			stat &= ~BIT(bit);
+		}
+
+		/*
+		 * interrupt status register write has no effect on
+		 * 801/1801/1600, bits are cleared when read.
+		 * Edge detect register is not present on 801/1600/1801
+		 */
+		if (stmpe->partnum != STMPE801 && stmpe->partnum != STMPE1600 &&
+		    stmpe->partnum != STMPE1801) {
+			stmpe_reg_write(stmpe, statmsbreg + i, status[i]);
+			stmpe_reg_write(stmpe,
+					stmpe->regs[STMPE_IDX_GPEDR_MSB] + i,
+					status[i]);
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void stmpe_init_irq_valid_mask(struct gpio_chip *gc,
+				      unsigned long *valid_mask,
+				      unsigned int ngpios)
+{
+	struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc);
+	int i;
+
+	if (!stmpe_gpio->norequest_mask)
+		return;
+
+	/* Forbid unused lines to be mapped as IRQs */
+	for (i = 0; i < sizeof(u32); i++) {
+		if (stmpe_gpio->norequest_mask & BIT(i))
+			clear_bit(i, valid_mask);
+	}
+}
+
+static int stmpe_gpio_probe(struct platform_device *pdev)
+{
+	struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent);
+	struct device_node *np = pdev->dev.of_node;
+	struct stmpe_gpio *stmpe_gpio;
+	int ret, irq;
+
+	if (stmpe->num_gpios > MAX_GPIOS) {
+		dev_err(&pdev->dev, "Need to increase maximum GPIO number\n");
+		return -EINVAL;
+	}
+
+	stmpe_gpio = kzalloc(sizeof(*stmpe_gpio), GFP_KERNEL);
+	if (!stmpe_gpio)
+		return -ENOMEM;
+
+	mutex_init(&stmpe_gpio->irq_lock);
+
+	stmpe_gpio->dev = &pdev->dev;
+	stmpe_gpio->stmpe = stmpe;
+	stmpe_gpio->chip = template_chip;
+	stmpe_gpio->chip.ngpio = stmpe->num_gpios;
+	stmpe_gpio->chip.parent = &pdev->dev;
+	stmpe_gpio->chip.of_node = np;
+	stmpe_gpio->chip.base = -1;
+	/*
+	 * REVISIT: this makes sure the valid mask gets allocated and
+	 * filled in when adding the gpio_chip, but the rest of the
+	 * gpio_irqchip is still filled in using the old method
+	 * in gpiochip_irqchip_add_nested() so clean this up once we
+	 * get the gpio_irqchip to initialize while adding the
+	 * gpio_chip also for threaded irqchips.
+	 */
+	stmpe_gpio->chip.irq.init_valid_mask = stmpe_init_irq_valid_mask;
+
+	if (IS_ENABLED(CONFIG_DEBUG_FS))
+                stmpe_gpio->chip.dbg_show = stmpe_dbg_show;
+
+	of_property_read_u32(np, "st,norequest-mask",
+			&stmpe_gpio->norequest_mask);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		dev_info(&pdev->dev,
+			"device configured in no-irq mode: "
+			"irqs are not available\n");
+
+	ret = stmpe_enable(stmpe, STMPE_BLOCK_GPIO);
+	if (ret)
+		goto out_free;
+
+	if (irq > 0) {
+		struct gpio_irq_chip *girq;
+
+		ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+				stmpe_gpio_irq, IRQF_ONESHOT,
+				"stmpe-gpio", stmpe_gpio);
+		if (ret) {
+			dev_err(&pdev->dev, "unable to get irq: %d\n", ret);
+			goto out_disable;
+		}
+
+		girq = &stmpe_gpio->chip.irq;
+		girq->chip = &stmpe_gpio_irq_chip;
+		/* This will let us handle the parent IRQ in the driver */
+		girq->parent_handler = NULL;
+		girq->num_parents = 0;
+		girq->parents = NULL;
+		girq->default_type = IRQ_TYPE_NONE;
+		girq->handler = handle_simple_irq;
+		girq->threaded = true;
+	}
+
+	ret = gpiochip_add_data(&stmpe_gpio->chip, stmpe_gpio);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to add gpiochip: %d\n", ret);
+		goto out_disable;
+	}
+
+	platform_set_drvdata(pdev, stmpe_gpio);
+
+	return 0;
+
+out_disable:
+	stmpe_disable(stmpe, STMPE_BLOCK_GPIO);
+	gpiochip_remove(&stmpe_gpio->chip);
+out_free:
+	kfree(stmpe_gpio);
+	return ret;
+}
+
+static struct platform_driver stmpe_gpio_driver = {
+	.driver = {
+		.suppress_bind_attrs	= true,
+		.name			= "stmpe-gpio",
+	},
+	.probe		= stmpe_gpio_probe,
+};
+
+static int __init stmpe_gpio_init(void)
+{
+	return platform_driver_register(&stmpe_gpio_driver);
+}
+subsys_initcall(stmpe_gpio_init);
diff --git a/drivers/gpio/gpio-stp-xway.c b/drivers/gpio/gpio-stp-xway.c
new file mode 100644
index 000000000..0ce154342
--- /dev/null
+++ b/drivers/gpio/gpio-stp-xway.c
@@ -0,0 +1,340 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *
+ *  Copyright (C) 2012 John Crispin <john@phrozen.org>
+ */
+
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/of_platform.h>
+#include <linux/mutex.h>
+#include <linux/gpio/driver.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+/*
+ * The Serial To Parallel (STP) is found on MIPS based Lantiq socs. It is a
+ * peripheral controller used to drive external shift register cascades. At most
+ * 3 groups of 8 bits can be driven. The hardware is able to allow the DSL modem
+ * to drive the 2 LSBs of the cascade automatically.
+ */
+
+/* control register 0 */
+#define XWAY_STP_CON0		0x00
+/* control register 1 */
+#define XWAY_STP_CON1		0x04
+/* data register 0 */
+#define XWAY_STP_CPU0		0x08
+/* data register 1 */
+#define XWAY_STP_CPU1		0x0C
+/* access register */
+#define XWAY_STP_AR		0x10
+
+/* software or hardware update select bit */
+#define XWAY_STP_CON_SWU	BIT(31)
+
+/* automatic update rates */
+#define XWAY_STP_2HZ		0
+#define XWAY_STP_4HZ		BIT(23)
+#define XWAY_STP_8HZ		BIT(24)
+#define XWAY_STP_10HZ		(BIT(24) | BIT(23))
+#define XWAY_STP_SPEED_MASK	(BIT(23) | BIT(24) | BIT(25) | BIT(26) | BIT(27))
+
+#define XWAY_STP_FPIS_VALUE	BIT(21)
+#define XWAY_STP_FPIS_MASK	(BIT(20) | BIT(21))
+
+/* clock source for automatic update */
+#define XWAY_STP_UPD_FPI	BIT(31)
+#define XWAY_STP_UPD_MASK	(BIT(31) | BIT(30))
+
+/* let the adsl core drive the 2 LSBs */
+#define XWAY_STP_ADSL_SHIFT	24
+#define XWAY_STP_ADSL_MASK	0x3
+
+/* 2 groups of 3 bits can be driven by the phys */
+#define XWAY_STP_PHY_MASK	0x7
+#define XWAY_STP_PHY1_SHIFT	27
+#define XWAY_STP_PHY2_SHIFT	3
+#define XWAY_STP_PHY3_SHIFT	6
+#define XWAY_STP_PHY4_SHIFT	15
+
+/* STP has 3 groups of 8 bits */
+#define XWAY_STP_GROUP0		BIT(0)
+#define XWAY_STP_GROUP1		BIT(1)
+#define XWAY_STP_GROUP2		BIT(2)
+#define XWAY_STP_GROUP_MASK	(0x7)
+
+/* Edge configuration bits */
+#define XWAY_STP_FALLING	BIT(26)
+#define XWAY_STP_EDGE_MASK	BIT(26)
+
+#define xway_stp_r32(m, reg)		__raw_readl(m + reg)
+#define xway_stp_w32(m, val, reg)	__raw_writel(val, m + reg)
+#define xway_stp_w32_mask(m, clear, set, reg) \
+		xway_stp_w32(m, (xway_stp_r32(m, reg) & ~(clear)) | (set), reg)
+
+struct xway_stp {
+	struct gpio_chip gc;
+	void __iomem *virt;
+	u32 edge;	/* rising or falling edge triggered shift register */
+	u32 shadow;	/* shadow the shift registers state */
+	u8 groups;	/* we can drive 1-3 groups of 8bit each */
+	u8 dsl;		/* the 2 LSBs can be driven by the dsl core */
+	u8 phy1;	/* 3 bits can be driven by phy1 */
+	u8 phy2;	/* 3 bits can be driven by phy2 */
+	u8 phy3;	/* 3 bits can be driven by phy3 */
+	u8 phy4;	/* 3 bits can be driven by phy4 */
+	u8 reserved;	/* mask out the hw driven bits in gpio_request */
+};
+
+/**
+ * xway_stp_get() - gpio_chip->get - get gpios.
+ * @gc:     Pointer to gpio_chip device structure.
+ * @gpio:   GPIO signal number.
+ *
+ * Gets the shadow value.
+ */
+static int xway_stp_get(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct xway_stp *chip = gpiochip_get_data(gc);
+
+	return (xway_stp_r32(chip->virt, XWAY_STP_CPU0) & BIT(gpio));
+}
+
+/**
+ * xway_stp_set() - gpio_chip->set - set gpios.
+ * @gc:     Pointer to gpio_chip device structure.
+ * @gpio:   GPIO signal number.
+ * @val:    Value to be written to specified signal.
+ *
+ * Set the shadow value and call ltq_ebu_apply.
+ */
+static void xway_stp_set(struct gpio_chip *gc, unsigned gpio, int val)
+{
+	struct xway_stp *chip = gpiochip_get_data(gc);
+
+	if (val)
+		chip->shadow |= BIT(gpio);
+	else
+		chip->shadow &= ~BIT(gpio);
+	xway_stp_w32(chip->virt, chip->shadow, XWAY_STP_CPU0);
+	if (!chip->reserved)
+		xway_stp_w32_mask(chip->virt, 0, XWAY_STP_CON_SWU, XWAY_STP_CON0);
+}
+
+/**
+ * xway_stp_dir_out() - gpio_chip->dir_out - set gpio direction.
+ * @gc:     Pointer to gpio_chip device structure.
+ * @gpio:   GPIO signal number.
+ * @val:    Value to be written to specified signal.
+ *
+ * Same as xway_stp_set, always returns 0.
+ */
+static int xway_stp_dir_out(struct gpio_chip *gc, unsigned gpio, int val)
+{
+	xway_stp_set(gc, gpio, val);
+
+	return 0;
+}
+
+/**
+ * xway_stp_request() - gpio_chip->request
+ * @gc:     Pointer to gpio_chip device structure.
+ * @gpio:   GPIO signal number.
+ *
+ * We mask out the HW driven pins
+ */
+static int xway_stp_request(struct gpio_chip *gc, unsigned gpio)
+{
+	struct xway_stp *chip = gpiochip_get_data(gc);
+
+	if ((gpio < 8) && (chip->reserved & BIT(gpio))) {
+		dev_err(gc->parent, "GPIO %d is driven by hardware\n", gpio);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+/**
+ * xway_stp_hw_init() - Configure the STP unit and enable the clock gate
+ * @chip: Pointer to the xway_stp chip structure
+ */
+static void xway_stp_hw_init(struct xway_stp *chip)
+{
+	/* sane defaults */
+	xway_stp_w32(chip->virt, 0, XWAY_STP_AR);
+	xway_stp_w32(chip->virt, 0, XWAY_STP_CPU0);
+	xway_stp_w32(chip->virt, 0, XWAY_STP_CPU1);
+	xway_stp_w32(chip->virt, XWAY_STP_CON_SWU, XWAY_STP_CON0);
+	xway_stp_w32(chip->virt, 0, XWAY_STP_CON1);
+
+	/* apply edge trigger settings for the shift register */
+	xway_stp_w32_mask(chip->virt, XWAY_STP_EDGE_MASK,
+				chip->edge, XWAY_STP_CON0);
+
+	/* apply led group settings */
+	xway_stp_w32_mask(chip->virt, XWAY_STP_GROUP_MASK,
+				chip->groups, XWAY_STP_CON1);
+
+	/* tell the hardware which pins are controlled by the dsl modem */
+	xway_stp_w32_mask(chip->virt,
+			XWAY_STP_ADSL_MASK << XWAY_STP_ADSL_SHIFT,
+			chip->dsl << XWAY_STP_ADSL_SHIFT,
+			XWAY_STP_CON0);
+
+	/* tell the hardware which pins are controlled by the phys */
+	xway_stp_w32_mask(chip->virt,
+			XWAY_STP_PHY_MASK << XWAY_STP_PHY1_SHIFT,
+			chip->phy1 << XWAY_STP_PHY1_SHIFT,
+			XWAY_STP_CON0);
+	xway_stp_w32_mask(chip->virt,
+			XWAY_STP_PHY_MASK << XWAY_STP_PHY2_SHIFT,
+			chip->phy2 << XWAY_STP_PHY2_SHIFT,
+			XWAY_STP_CON1);
+
+	if (of_machine_is_compatible("lantiq,grx390")
+	    || of_machine_is_compatible("lantiq,ar10")) {
+		xway_stp_w32_mask(chip->virt,
+				XWAY_STP_PHY_MASK << XWAY_STP_PHY3_SHIFT,
+				chip->phy3 << XWAY_STP_PHY3_SHIFT,
+				XWAY_STP_CON1);
+	}
+
+	if (of_machine_is_compatible("lantiq,grx390")) {
+		xway_stp_w32_mask(chip->virt,
+				XWAY_STP_PHY_MASK << XWAY_STP_PHY4_SHIFT,
+				chip->phy4 << XWAY_STP_PHY4_SHIFT,
+				XWAY_STP_CON1);
+	}
+
+	/* mask out the hw driven bits in gpio_request */
+	chip->reserved = (chip->phy4 << 11) | (chip->phy3 << 8) | (chip->phy2 << 5)
+		| (chip->phy1 << 2) | chip->dsl;
+
+	/*
+	 * if we have pins that are driven by hw, we need to tell the stp what
+	 * clock to use as a timer.
+	 */
+	if (chip->reserved) {
+		xway_stp_w32_mask(chip->virt, XWAY_STP_UPD_MASK,
+			XWAY_STP_UPD_FPI, XWAY_STP_CON1);
+		xway_stp_w32_mask(chip->virt, XWAY_STP_SPEED_MASK,
+			XWAY_STP_10HZ, XWAY_STP_CON1);
+		xway_stp_w32_mask(chip->virt, XWAY_STP_FPIS_MASK,
+			XWAY_STP_FPIS_VALUE, XWAY_STP_CON1);
+	}
+}
+
+static int xway_stp_probe(struct platform_device *pdev)
+{
+	u32 shadow, groups, dsl, phy;
+	struct xway_stp *chip;
+	struct clk *clk;
+	int ret = 0;
+
+	chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	chip->virt = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(chip->virt))
+		return PTR_ERR(chip->virt);
+
+	chip->gc.parent = &pdev->dev;
+	chip->gc.label = "stp-xway";
+	chip->gc.direction_output = xway_stp_dir_out;
+	chip->gc.get = xway_stp_get;
+	chip->gc.set = xway_stp_set;
+	chip->gc.request = xway_stp_request;
+	chip->gc.base = -1;
+	chip->gc.owner = THIS_MODULE;
+
+	/* store the shadow value if one was passed by the devicetree */
+	if (!of_property_read_u32(pdev->dev.of_node, "lantiq,shadow", &shadow))
+		chip->shadow = shadow;
+
+	/* find out which gpio groups should be enabled */
+	if (!of_property_read_u32(pdev->dev.of_node, "lantiq,groups", &groups))
+		chip->groups = groups & XWAY_STP_GROUP_MASK;
+	else
+		chip->groups = XWAY_STP_GROUP0;
+	chip->gc.ngpio = fls(chip->groups) * 8;
+
+	/* find out which gpios are controlled by the dsl core */
+	if (!of_property_read_u32(pdev->dev.of_node, "lantiq,dsl", &dsl))
+		chip->dsl = dsl & XWAY_STP_ADSL_MASK;
+
+	/* find out which gpios are controlled by the phys */
+	if (of_machine_is_compatible("lantiq,ar9") ||
+			of_machine_is_compatible("lantiq,gr9") ||
+			of_machine_is_compatible("lantiq,vr9") ||
+			of_machine_is_compatible("lantiq,ar10") ||
+			of_machine_is_compatible("lantiq,grx390")) {
+		if (!of_property_read_u32(pdev->dev.of_node, "lantiq,phy1", &phy))
+			chip->phy1 = phy & XWAY_STP_PHY_MASK;
+		if (!of_property_read_u32(pdev->dev.of_node, "lantiq,phy2", &phy))
+			chip->phy2 = phy & XWAY_STP_PHY_MASK;
+	}
+
+	if (of_machine_is_compatible("lantiq,ar10") ||
+			of_machine_is_compatible("lantiq,grx390")) {
+		if (!of_property_read_u32(pdev->dev.of_node, "lantiq,phy3", &phy))
+			chip->phy3 = phy & XWAY_STP_PHY_MASK;
+	}
+
+	if (of_machine_is_compatible("lantiq,grx390")) {
+		if (!of_property_read_u32(pdev->dev.of_node, "lantiq,phy4", &phy))
+			chip->phy4 = phy & XWAY_STP_PHY_MASK;
+	}
+
+	/* check which edge trigger we should use, default to a falling edge */
+	if (!of_find_property(pdev->dev.of_node, "lantiq,rising", NULL))
+		chip->edge = XWAY_STP_FALLING;
+
+	clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "Failed to get clock\n");
+		return PTR_ERR(clk);
+	}
+
+	ret = clk_prepare_enable(clk);
+	if (ret)
+		return ret;
+
+	xway_stp_hw_init(chip);
+
+	ret = devm_gpiochip_add_data(&pdev->dev, &chip->gc, chip);
+	if (ret) {
+		clk_disable_unprepare(clk);
+		return ret;
+	}
+
+	dev_info(&pdev->dev, "Init done\n");
+
+	return 0;
+}
+
+static const struct of_device_id xway_stp_match[] = {
+	{ .compatible = "lantiq,gpio-stp-xway" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, xway_stp_match);
+
+static struct platform_driver xway_stp_driver = {
+	.probe = xway_stp_probe,
+	.driver = {
+		.name = "gpio-stp-xway",
+		.of_match_table = xway_stp_match,
+	},
+};
+
+static int __init xway_stp_init(void)
+{
+	return platform_driver_register(&xway_stp_driver);
+}
+
+subsys_initcall(xway_stp_init);
diff --git a/drivers/gpio/gpio-syscon.c b/drivers/gpio/gpio-syscon.c
new file mode 100644
index 000000000..fdd3d497b
--- /dev/null
+++ b/drivers/gpio/gpio-syscon.c
@@ -0,0 +1,279 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  SYSCON GPIO driver
+ *
+ *  Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ */
+
+#include <linux/err.h>
+#include <linux/gpio/driver.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+
+#define GPIO_SYSCON_FEAT_IN	BIT(0)
+#define GPIO_SYSCON_FEAT_OUT	BIT(1)
+#define GPIO_SYSCON_FEAT_DIR	BIT(2)
+
+/* SYSCON driver is designed to use 32-bit wide registers */
+#define SYSCON_REG_SIZE		(4)
+#define SYSCON_REG_BITS		(SYSCON_REG_SIZE * 8)
+
+/**
+ * struct syscon_gpio_data - Configuration for the device.
+ * @compatible:		SYSCON driver compatible string.
+ * @flags:		Set of GPIO_SYSCON_FEAT_ flags:
+ *			GPIO_SYSCON_FEAT_IN:	GPIOs supports input,
+ *			GPIO_SYSCON_FEAT_OUT:	GPIOs supports output,
+ *			GPIO_SYSCON_FEAT_DIR:	GPIOs supports switch direction.
+ * @bit_count:		Number of bits used as GPIOs.
+ * @dat_bit_offset:	Offset (in bits) to the first GPIO bit.
+ * @dir_bit_offset:	Optional offset (in bits) to the first bit to switch
+ *			GPIO direction (Used with GPIO_SYSCON_FEAT_DIR flag).
+ * @set:		HW specific callback to assigns output value
+ *			for signal "offset"
+ */
+
+struct syscon_gpio_data {
+	const char	*compatible;
+	unsigned int	flags;
+	unsigned int	bit_count;
+	unsigned int	dat_bit_offset;
+	unsigned int	dir_bit_offset;
+	void		(*set)(struct gpio_chip *chip,
+			       unsigned offset, int value);
+};
+
+struct syscon_gpio_priv {
+	struct gpio_chip		chip;
+	struct regmap			*syscon;
+	const struct syscon_gpio_data	*data;
+	u32				dreg_offset;
+	u32				dir_reg_offset;
+};
+
+static int syscon_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct syscon_gpio_priv *priv = gpiochip_get_data(chip);
+	unsigned int val, offs;
+	int ret;
+
+	offs = priv->dreg_offset + priv->data->dat_bit_offset + offset;
+
+	ret = regmap_read(priv->syscon,
+			  (offs / SYSCON_REG_BITS) * SYSCON_REG_SIZE, &val);
+	if (ret)
+		return ret;
+
+	return !!(val & BIT(offs % SYSCON_REG_BITS));
+}
+
+static void syscon_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
+{
+	struct syscon_gpio_priv *priv = gpiochip_get_data(chip);
+	unsigned int offs;
+
+	offs = priv->dreg_offset + priv->data->dat_bit_offset + offset;
+
+	regmap_update_bits(priv->syscon,
+			   (offs / SYSCON_REG_BITS) * SYSCON_REG_SIZE,
+			   BIT(offs % SYSCON_REG_BITS),
+			   val ? BIT(offs % SYSCON_REG_BITS) : 0);
+}
+
+static int syscon_gpio_dir_in(struct gpio_chip *chip, unsigned offset)
+{
+	struct syscon_gpio_priv *priv = gpiochip_get_data(chip);
+
+	if (priv->data->flags & GPIO_SYSCON_FEAT_DIR) {
+		unsigned int offs;
+
+		offs = priv->dir_reg_offset +
+		       priv->data->dir_bit_offset + offset;
+
+		regmap_update_bits(priv->syscon,
+				   (offs / SYSCON_REG_BITS) * SYSCON_REG_SIZE,
+				   BIT(offs % SYSCON_REG_BITS), 0);
+	}
+
+	return 0;
+}
+
+static int syscon_gpio_dir_out(struct gpio_chip *chip, unsigned offset, int val)
+{
+	struct syscon_gpio_priv *priv = gpiochip_get_data(chip);
+
+	if (priv->data->flags & GPIO_SYSCON_FEAT_DIR) {
+		unsigned int offs;
+
+		offs = priv->dir_reg_offset +
+		       priv->data->dir_bit_offset + offset;
+
+		regmap_update_bits(priv->syscon,
+				   (offs / SYSCON_REG_BITS) * SYSCON_REG_SIZE,
+				   BIT(offs % SYSCON_REG_BITS),
+				   BIT(offs % SYSCON_REG_BITS));
+	}
+
+	chip->set(chip, offset, val);
+
+	return 0;
+}
+
+static const struct syscon_gpio_data clps711x_mctrl_gpio = {
+	/* ARM CLPS711X SYSFLG1 Bits 8-10 */
+	.compatible	= "cirrus,ep7209-syscon1",
+	.flags		= GPIO_SYSCON_FEAT_IN,
+	.bit_count	= 3,
+	.dat_bit_offset	= 0x40 * 8 + 8,
+};
+
+static void rockchip_gpio_set(struct gpio_chip *chip, unsigned int offset,
+			      int val)
+{
+	struct syscon_gpio_priv *priv = gpiochip_get_data(chip);
+	unsigned int offs;
+	u8 bit;
+	u32 data;
+	int ret;
+
+	offs = priv->dreg_offset + priv->data->dat_bit_offset + offset;
+	bit = offs % SYSCON_REG_BITS;
+	data = (val ? BIT(bit) : 0) | BIT(bit + 16);
+	ret = regmap_write(priv->syscon,
+			   (offs / SYSCON_REG_BITS) * SYSCON_REG_SIZE,
+			   data);
+	if (ret < 0)
+		dev_err(chip->parent, "gpio write failed ret(%d)\n", ret);
+}
+
+static const struct syscon_gpio_data rockchip_rk3328_gpio_mute = {
+	/* RK3328 GPIO_MUTE is an output only pin at GRF_SOC_CON10[1] */
+	.flags		= GPIO_SYSCON_FEAT_OUT,
+	.bit_count	= 1,
+	.dat_bit_offset = 0x0428 * 8 + 1,
+	.set		= rockchip_gpio_set,
+};
+
+#define KEYSTONE_LOCK_BIT BIT(0)
+
+static void keystone_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
+{
+	struct syscon_gpio_priv *priv = gpiochip_get_data(chip);
+	unsigned int offs;
+	int ret;
+
+	offs = priv->dreg_offset + priv->data->dat_bit_offset + offset;
+
+	if (!val)
+		return;
+
+	ret = regmap_update_bits(
+			priv->syscon,
+			(offs / SYSCON_REG_BITS) * SYSCON_REG_SIZE,
+			BIT(offs % SYSCON_REG_BITS) | KEYSTONE_LOCK_BIT,
+			BIT(offs % SYSCON_REG_BITS) | KEYSTONE_LOCK_BIT);
+	if (ret < 0)
+		dev_err(chip->parent, "gpio write failed ret(%d)\n", ret);
+}
+
+static const struct syscon_gpio_data keystone_dsp_gpio = {
+	/* ARM Keystone 2 */
+	.compatible	= NULL,
+	.flags		= GPIO_SYSCON_FEAT_OUT,
+	.bit_count	= 28,
+	.dat_bit_offset	= 4,
+	.set		= keystone_gpio_set,
+};
+
+static const struct of_device_id syscon_gpio_ids[] = {
+	{
+		.compatible	= "cirrus,ep7209-mctrl-gpio",
+		.data		= &clps711x_mctrl_gpio,
+	},
+	{
+		.compatible	= "ti,keystone-dsp-gpio",
+		.data		= &keystone_dsp_gpio,
+	},
+	{
+		.compatible	= "rockchip,rk3328-grf-gpio",
+		.data		= &rockchip_rk3328_gpio_mute,
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, syscon_gpio_ids);
+
+static int syscon_gpio_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct syscon_gpio_priv *priv;
+	struct device_node *np = dev->of_node;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->data = of_device_get_match_data(dev);
+
+	if (priv->data->compatible) {
+		priv->syscon = syscon_regmap_lookup_by_compatible(
+					priv->data->compatible);
+		if (IS_ERR(priv->syscon))
+			return PTR_ERR(priv->syscon);
+	} else {
+		priv->syscon =
+			syscon_regmap_lookup_by_phandle(np, "gpio,syscon-dev");
+		if (IS_ERR(priv->syscon) && np->parent)
+			priv->syscon = syscon_node_to_regmap(np->parent);
+		if (IS_ERR(priv->syscon))
+			return PTR_ERR(priv->syscon);
+
+		ret = of_property_read_u32_index(np, "gpio,syscon-dev", 1,
+						 &priv->dreg_offset);
+		if (ret)
+			dev_err(dev, "can't read the data register offset!\n");
+
+		priv->dreg_offset <<= 3;
+
+		ret = of_property_read_u32_index(np, "gpio,syscon-dev", 2,
+						 &priv->dir_reg_offset);
+		if (ret)
+			dev_dbg(dev, "can't read the dir register offset!\n");
+
+		priv->dir_reg_offset <<= 3;
+	}
+
+	priv->chip.parent = dev;
+	priv->chip.owner = THIS_MODULE;
+	priv->chip.label = dev_name(dev);
+	priv->chip.base = -1;
+	priv->chip.ngpio = priv->data->bit_count;
+	priv->chip.get = syscon_gpio_get;
+	if (priv->data->flags & GPIO_SYSCON_FEAT_IN)
+		priv->chip.direction_input = syscon_gpio_dir_in;
+	if (priv->data->flags & GPIO_SYSCON_FEAT_OUT) {
+		priv->chip.set = priv->data->set ? : syscon_gpio_set;
+		priv->chip.direction_output = syscon_gpio_dir_out;
+	}
+
+	platform_set_drvdata(pdev, priv);
+
+	return devm_gpiochip_add_data(&pdev->dev, &priv->chip, priv);
+}
+
+static struct platform_driver syscon_gpio_driver = {
+	.driver	= {
+		.name		= "gpio-syscon",
+		.of_match_table	= syscon_gpio_ids,
+	},
+	.probe	= syscon_gpio_probe,
+};
+module_platform_driver(syscon_gpio_driver);
+
+MODULE_AUTHOR("Alexander Shiyan <shc_work@mail.ru>");
+MODULE_DESCRIPTION("SYSCON GPIO driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/gpio-tb10x.c b/drivers/gpio/gpio-tb10x.c
new file mode 100644
index 000000000..4a9dcaad4
--- /dev/null
+++ b/drivers/gpio/gpio-tb10x.c
@@ -0,0 +1,249 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* Abilis Systems MODULE DESCRIPTION
+ *
+ * Copyright (C) Abilis Systems 2013
+ *
+ * Authors: Sascha Leuenberger <sascha.leuenberger@abilis.com>
+ *          Christian Ruppert <christian.ruppert@abilis.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/gpio/driver.h>
+#include <linux/slab.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/spinlock.h>
+#include <linux/bitops.h>
+#include <linux/pinctrl/consumer.h>
+
+#define TB10X_GPIO_DIR_IN	(0x00000000)
+#define TB10X_GPIO_DIR_OUT	(0x00000001)
+#define OFFSET_TO_REG_DDR	(0x00)
+#define OFFSET_TO_REG_DATA	(0x04)
+#define OFFSET_TO_REG_INT_EN	(0x08)
+#define OFFSET_TO_REG_CHANGE	(0x0C)
+#define OFFSET_TO_REG_WRMASK	(0x10)
+#define OFFSET_TO_REG_INT_TYPE	(0x14)
+
+
+/**
+ * @base: register base address
+ * @domain: IRQ domain of GPIO generated interrupts managed by this controller
+ * @irq: Interrupt line of parent interrupt controller
+ * @gc: gpio_chip structure associated to this GPIO controller
+ */
+struct tb10x_gpio {
+	void __iomem *base;
+	struct irq_domain *domain;
+	int irq;
+	struct gpio_chip gc;
+};
+
+static inline u32 tb10x_reg_read(struct tb10x_gpio *gpio, unsigned int offs)
+{
+	return ioread32(gpio->base + offs);
+}
+
+static inline void tb10x_reg_write(struct tb10x_gpio *gpio, unsigned int offs,
+				u32 val)
+{
+	iowrite32(val, gpio->base + offs);
+}
+
+static inline void tb10x_set_bits(struct tb10x_gpio *gpio, unsigned int offs,
+				u32 mask, u32 val)
+{
+	u32 r;
+	unsigned long flags;
+
+	spin_lock_irqsave(&gpio->gc.bgpio_lock, flags);
+
+	r = tb10x_reg_read(gpio, offs);
+	r = (r & ~mask) | (val & mask);
+
+	tb10x_reg_write(gpio, offs, r);
+
+	spin_unlock_irqrestore(&gpio->gc.bgpio_lock, flags);
+}
+
+static int tb10x_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	struct tb10x_gpio *tb10x_gpio = gpiochip_get_data(chip);
+
+	return irq_create_mapping(tb10x_gpio->domain, offset);
+}
+
+static int tb10x_gpio_irq_set_type(struct irq_data *data, unsigned int type)
+{
+	if ((type & IRQF_TRIGGER_MASK) != IRQ_TYPE_EDGE_BOTH) {
+		pr_err("Only (both) edge triggered interrupts supported.\n");
+		return -EINVAL;
+	}
+
+	irqd_set_trigger_type(data, type);
+
+	return IRQ_SET_MASK_OK;
+}
+
+static irqreturn_t tb10x_gpio_irq_cascade(int irq, void *data)
+{
+	struct tb10x_gpio *tb10x_gpio = data;
+	u32 r = tb10x_reg_read(tb10x_gpio, OFFSET_TO_REG_CHANGE);
+	u32 m = tb10x_reg_read(tb10x_gpio, OFFSET_TO_REG_INT_EN);
+	const unsigned long bits = r & m;
+	int i;
+
+	for_each_set_bit(i, &bits, 32)
+		generic_handle_irq(irq_find_mapping(tb10x_gpio->domain, i));
+
+	return IRQ_HANDLED;
+}
+
+static int tb10x_gpio_probe(struct platform_device *pdev)
+{
+	struct tb10x_gpio *tb10x_gpio;
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	int ret = -EBUSY;
+	u32 ngpio;
+
+	if (!np)
+		return -EINVAL;
+
+	if (of_property_read_u32(np, "abilis,ngpio", &ngpio))
+		return -EINVAL;
+
+	tb10x_gpio = devm_kzalloc(dev, sizeof(*tb10x_gpio), GFP_KERNEL);
+	if (tb10x_gpio == NULL)
+		return -ENOMEM;
+
+	tb10x_gpio->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(tb10x_gpio->base))
+		return PTR_ERR(tb10x_gpio->base);
+
+	tb10x_gpio->gc.label =
+		devm_kasprintf(dev, GFP_KERNEL, "%pOF", pdev->dev.of_node);
+	if (!tb10x_gpio->gc.label)
+		return -ENOMEM;
+
+	/*
+	 * Initialize generic GPIO with one single register for reading and setting
+	 * the lines, no special set or clear registers and a data direction register
+	 * wher 1 means "output".
+	 */
+	ret = bgpio_init(&tb10x_gpio->gc, dev, 4,
+			 tb10x_gpio->base + OFFSET_TO_REG_DATA,
+			 NULL,
+			 NULL,
+			 tb10x_gpio->base + OFFSET_TO_REG_DDR,
+			 NULL,
+			 0);
+	if (ret) {
+		dev_err(dev, "unable to init generic GPIO\n");
+		return ret;
+	}
+	tb10x_gpio->gc.base = -1;
+	tb10x_gpio->gc.parent = dev;
+	tb10x_gpio->gc.owner = THIS_MODULE;
+	/*
+	 * ngpio is set by bgpio_init() but we override it, this .request()
+	 * callback also overrides the one set up by generic GPIO.
+	 */
+	tb10x_gpio->gc.ngpio = ngpio;
+	tb10x_gpio->gc.request = gpiochip_generic_request;
+	tb10x_gpio->gc.free = gpiochip_generic_free;
+
+	ret = devm_gpiochip_add_data(dev, &tb10x_gpio->gc, tb10x_gpio);
+	if (ret < 0) {
+		dev_err(dev, "Could not add gpiochip.\n");
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, tb10x_gpio);
+
+	if (of_find_property(np, "interrupt-controller", NULL)) {
+		struct irq_chip_generic *gc;
+
+		ret = platform_get_irq(pdev, 0);
+		if (ret < 0)
+			return ret;
+
+		tb10x_gpio->gc.to_irq	= tb10x_gpio_to_irq;
+		tb10x_gpio->irq		= ret;
+
+		ret = devm_request_irq(dev, ret, tb10x_gpio_irq_cascade,
+				IRQF_TRIGGER_NONE | IRQF_SHARED,
+				dev_name(dev), tb10x_gpio);
+		if (ret != 0)
+			return ret;
+
+		tb10x_gpio->domain = irq_domain_add_linear(np,
+						tb10x_gpio->gc.ngpio,
+						&irq_generic_chip_ops, NULL);
+		if (!tb10x_gpio->domain) {
+			return -ENOMEM;
+		}
+
+		ret = irq_alloc_domain_generic_chips(tb10x_gpio->domain,
+				tb10x_gpio->gc.ngpio, 1, tb10x_gpio->gc.label,
+				handle_edge_irq, IRQ_NOREQUEST, IRQ_NOPROBE,
+				IRQ_GC_INIT_MASK_CACHE);
+		if (ret)
+			goto err_remove_domain;
+
+		gc = tb10x_gpio->domain->gc->gc[0];
+		gc->reg_base                         = tb10x_gpio->base;
+		gc->chip_types[0].type               = IRQ_TYPE_EDGE_BOTH;
+		gc->chip_types[0].chip.irq_ack       = irq_gc_ack_set_bit;
+		gc->chip_types[0].chip.irq_mask      = irq_gc_mask_clr_bit;
+		gc->chip_types[0].chip.irq_unmask    = irq_gc_mask_set_bit;
+		gc->chip_types[0].chip.irq_set_type  = tb10x_gpio_irq_set_type;
+		gc->chip_types[0].regs.ack           = OFFSET_TO_REG_CHANGE;
+		gc->chip_types[0].regs.mask          = OFFSET_TO_REG_INT_EN;
+	}
+
+	return 0;
+
+err_remove_domain:
+	irq_domain_remove(tb10x_gpio->domain);
+	return ret;
+}
+
+static int tb10x_gpio_remove(struct platform_device *pdev)
+{
+	struct tb10x_gpio *tb10x_gpio = platform_get_drvdata(pdev);
+
+	if (tb10x_gpio->gc.to_irq) {
+		irq_remove_generic_chip(tb10x_gpio->domain->gc->gc[0],
+					BIT(tb10x_gpio->gc.ngpio) - 1, 0, 0);
+		kfree(tb10x_gpio->domain->gc);
+		irq_domain_remove(tb10x_gpio->domain);
+	}
+
+	return 0;
+}
+
+static const struct of_device_id tb10x_gpio_dt_ids[] = {
+	{ .compatible = "abilis,tb10x-gpio" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, tb10x_gpio_dt_ids);
+
+static struct platform_driver tb10x_gpio_driver = {
+	.probe		= tb10x_gpio_probe,
+	.remove		= tb10x_gpio_remove,
+	.driver = {
+		.name	= "tb10x-gpio",
+		.of_match_table = tb10x_gpio_dt_ids,
+	}
+};
+
+module_platform_driver(tb10x_gpio_driver);
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("tb10x gpio.");
diff --git a/drivers/gpio/gpio-tc3589x.c b/drivers/gpio/gpio-tc3589x.c
new file mode 100644
index 000000000..55b8dbd13
--- /dev/null
+++ b/drivers/gpio/gpio-tc3589x.c
@@ -0,0 +1,381 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Hanumath Prasad <hanumath.prasad@stericsson.com> for ST-Ericsson
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/gpio/driver.h>
+#include <linux/of.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/tc3589x.h>
+#include <linux/bitops.h>
+
+/*
+ * These registers are modified under the irq bus lock and cached to avoid
+ * unnecessary writes in bus_sync_unlock.
+ */
+enum { REG_IBE, REG_IEV, REG_IS, REG_IE, REG_DIRECT };
+
+#define CACHE_NR_REGS	5
+#define CACHE_NR_BANKS	3
+
+struct tc3589x_gpio {
+	struct gpio_chip chip;
+	struct tc3589x *tc3589x;
+	struct device *dev;
+	struct mutex irq_lock;
+	/* Caches of interrupt control registers for bus_lock */
+	u8 regs[CACHE_NR_REGS][CACHE_NR_BANKS];
+	u8 oldregs[CACHE_NR_REGS][CACHE_NR_BANKS];
+};
+
+static int tc3589x_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+	struct tc3589x_gpio *tc3589x_gpio = gpiochip_get_data(chip);
+	struct tc3589x *tc3589x = tc3589x_gpio->tc3589x;
+	u8 reg = TC3589x_GPIODATA0 + (offset / 8) * 2;
+	u8 mask = BIT(offset % 8);
+	int ret;
+
+	ret = tc3589x_reg_read(tc3589x, reg);
+	if (ret < 0)
+		return ret;
+
+	return !!(ret & mask);
+}
+
+static void tc3589x_gpio_set(struct gpio_chip *chip, unsigned int offset, int val)
+{
+	struct tc3589x_gpio *tc3589x_gpio = gpiochip_get_data(chip);
+	struct tc3589x *tc3589x = tc3589x_gpio->tc3589x;
+	u8 reg = TC3589x_GPIODATA0 + (offset / 8) * 2;
+	unsigned int pos = offset % 8;
+	u8 data[] = {val ? BIT(pos) : 0, BIT(pos)};
+
+	tc3589x_block_write(tc3589x, reg, ARRAY_SIZE(data), data);
+}
+
+static int tc3589x_gpio_direction_output(struct gpio_chip *chip,
+					 unsigned int offset, int val)
+{
+	struct tc3589x_gpio *tc3589x_gpio = gpiochip_get_data(chip);
+	struct tc3589x *tc3589x = tc3589x_gpio->tc3589x;
+	u8 reg = TC3589x_GPIODIR0 + offset / 8;
+	unsigned int pos = offset % 8;
+
+	tc3589x_gpio_set(chip, offset, val);
+
+	return tc3589x_set_bits(tc3589x, reg, BIT(pos), BIT(pos));
+}
+
+static int tc3589x_gpio_direction_input(struct gpio_chip *chip,
+					unsigned int offset)
+{
+	struct tc3589x_gpio *tc3589x_gpio = gpiochip_get_data(chip);
+	struct tc3589x *tc3589x = tc3589x_gpio->tc3589x;
+	u8 reg = TC3589x_GPIODIR0 + offset / 8;
+	unsigned int pos = offset % 8;
+
+	return tc3589x_set_bits(tc3589x, reg, BIT(pos), 0);
+}
+
+static int tc3589x_gpio_get_direction(struct gpio_chip *chip,
+				      unsigned int offset)
+{
+	struct tc3589x_gpio *tc3589x_gpio = gpiochip_get_data(chip);
+	struct tc3589x *tc3589x = tc3589x_gpio->tc3589x;
+	u8 reg = TC3589x_GPIODIR0 + offset / 8;
+	unsigned int pos = offset % 8;
+	int ret;
+
+	ret = tc3589x_reg_read(tc3589x, reg);
+	if (ret < 0)
+		return ret;
+
+	if (ret & BIT(pos))
+		return GPIO_LINE_DIRECTION_OUT;
+
+	return GPIO_LINE_DIRECTION_IN;
+}
+
+static int tc3589x_gpio_set_config(struct gpio_chip *chip, unsigned int offset,
+				   unsigned long config)
+{
+	struct tc3589x_gpio *tc3589x_gpio = gpiochip_get_data(chip);
+	struct tc3589x *tc3589x = tc3589x_gpio->tc3589x;
+	/*
+	 * These registers are alterated at each second address
+	 * ODM bit 0 = drive to GND or Hi-Z (open drain)
+	 * ODM bit 1 = drive to VDD or Hi-Z (open source)
+	 */
+	u8 odmreg = TC3589x_GPIOODM0 + (offset / 8) * 2;
+	u8 odereg = TC3589x_GPIOODE0 + (offset / 8) * 2;
+	unsigned int pos = offset % 8;
+	int ret;
+
+	switch (pinconf_to_config_param(config)) {
+	case PIN_CONFIG_DRIVE_OPEN_DRAIN:
+		/* Set open drain mode */
+		ret = tc3589x_set_bits(tc3589x, odmreg, BIT(pos), 0);
+		if (ret)
+			return ret;
+		/* Enable open drain/source mode */
+		return tc3589x_set_bits(tc3589x, odereg, BIT(pos), BIT(pos));
+	case PIN_CONFIG_DRIVE_OPEN_SOURCE:
+		/* Set open source mode */
+		ret = tc3589x_set_bits(tc3589x, odmreg, BIT(pos), BIT(pos));
+		if (ret)
+			return ret;
+		/* Enable open drain/source mode */
+		return tc3589x_set_bits(tc3589x, odereg, BIT(pos), BIT(pos));
+	case PIN_CONFIG_DRIVE_PUSH_PULL:
+		/* Disable open drain/source mode */
+		return tc3589x_set_bits(tc3589x, odereg, BIT(pos), 0);
+	default:
+		break;
+	}
+	return -ENOTSUPP;
+}
+
+static const struct gpio_chip template_chip = {
+	.label			= "tc3589x",
+	.owner			= THIS_MODULE,
+	.get			= tc3589x_gpio_get,
+	.set			= tc3589x_gpio_set,
+	.direction_output	= tc3589x_gpio_direction_output,
+	.direction_input	= tc3589x_gpio_direction_input,
+	.get_direction		= tc3589x_gpio_get_direction,
+	.set_config		= tc3589x_gpio_set_config,
+	.can_sleep		= true,
+};
+
+static int tc3589x_gpio_irq_set_type(struct irq_data *d, unsigned int type)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct tc3589x_gpio *tc3589x_gpio = gpiochip_get_data(gc);
+	int offset = d->hwirq;
+	int regoffset = offset / 8;
+	int mask = BIT(offset % 8);
+
+	if (type == IRQ_TYPE_EDGE_BOTH) {
+		tc3589x_gpio->regs[REG_IBE][regoffset] |= mask;
+		return 0;
+	}
+
+	tc3589x_gpio->regs[REG_IBE][regoffset] &= ~mask;
+
+	if (type == IRQ_TYPE_LEVEL_LOW || type == IRQ_TYPE_LEVEL_HIGH)
+		tc3589x_gpio->regs[REG_IS][regoffset] |= mask;
+	else
+		tc3589x_gpio->regs[REG_IS][regoffset] &= ~mask;
+
+	if (type == IRQ_TYPE_EDGE_RISING || type == IRQ_TYPE_LEVEL_HIGH)
+		tc3589x_gpio->regs[REG_IEV][regoffset] |= mask;
+	else
+		tc3589x_gpio->regs[REG_IEV][regoffset] &= ~mask;
+
+	return 0;
+}
+
+static void tc3589x_gpio_irq_lock(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct tc3589x_gpio *tc3589x_gpio = gpiochip_get_data(gc);
+
+	mutex_lock(&tc3589x_gpio->irq_lock);
+}
+
+static void tc3589x_gpio_irq_sync_unlock(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct tc3589x_gpio *tc3589x_gpio = gpiochip_get_data(gc);
+	struct tc3589x *tc3589x = tc3589x_gpio->tc3589x;
+	static const u8 regmap[] = {
+		[REG_IBE]	= TC3589x_GPIOIBE0,
+		[REG_IEV]	= TC3589x_GPIOIEV0,
+		[REG_IS]	= TC3589x_GPIOIS0,
+		[REG_IE]	= TC3589x_GPIOIE0,
+		[REG_DIRECT]	= TC3589x_DIRECT0,
+	};
+	int i, j;
+
+	for (i = 0; i < CACHE_NR_REGS; i++) {
+		for (j = 0; j < CACHE_NR_BANKS; j++) {
+			u8 old = tc3589x_gpio->oldregs[i][j];
+			u8 new = tc3589x_gpio->regs[i][j];
+
+			if (new == old)
+				continue;
+
+			tc3589x_gpio->oldregs[i][j] = new;
+			tc3589x_reg_write(tc3589x, regmap[i] + j, new);
+		}
+	}
+
+	mutex_unlock(&tc3589x_gpio->irq_lock);
+}
+
+static void tc3589x_gpio_irq_mask(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct tc3589x_gpio *tc3589x_gpio = gpiochip_get_data(gc);
+	int offset = d->hwirq;
+	int regoffset = offset / 8;
+	int mask = BIT(offset % 8);
+
+	tc3589x_gpio->regs[REG_IE][regoffset] &= ~mask;
+	tc3589x_gpio->regs[REG_DIRECT][regoffset] |= mask;
+}
+
+static void tc3589x_gpio_irq_unmask(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct tc3589x_gpio *tc3589x_gpio = gpiochip_get_data(gc);
+	int offset = d->hwirq;
+	int regoffset = offset / 8;
+	int mask = BIT(offset % 8);
+
+	tc3589x_gpio->regs[REG_IE][regoffset] |= mask;
+	tc3589x_gpio->regs[REG_DIRECT][regoffset] &= ~mask;
+}
+
+static struct irq_chip tc3589x_gpio_irq_chip = {
+	.name			= "tc3589x-gpio",
+	.irq_bus_lock		= tc3589x_gpio_irq_lock,
+	.irq_bus_sync_unlock	= tc3589x_gpio_irq_sync_unlock,
+	.irq_mask		= tc3589x_gpio_irq_mask,
+	.irq_unmask		= tc3589x_gpio_irq_unmask,
+	.irq_set_type		= tc3589x_gpio_irq_set_type,
+};
+
+static irqreturn_t tc3589x_gpio_irq(int irq, void *dev)
+{
+	struct tc3589x_gpio *tc3589x_gpio = dev;
+	struct tc3589x *tc3589x = tc3589x_gpio->tc3589x;
+	u8 status[CACHE_NR_BANKS];
+	int ret;
+	int i;
+
+	ret = tc3589x_block_read(tc3589x, TC3589x_GPIOMIS0,
+				 ARRAY_SIZE(status), status);
+	if (ret < 0)
+		return IRQ_NONE;
+
+	for (i = 0; i < ARRAY_SIZE(status); i++) {
+		unsigned int stat = status[i];
+		if (!stat)
+			continue;
+
+		while (stat) {
+			int bit = __ffs(stat);
+			int line = i * 8 + bit;
+			int irq = irq_find_mapping(tc3589x_gpio->chip.irq.domain,
+						   line);
+
+			handle_nested_irq(irq);
+			stat &= ~(1 << bit);
+		}
+
+		tc3589x_reg_write(tc3589x, TC3589x_GPIOIC0 + i, status[i]);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int tc3589x_gpio_probe(struct platform_device *pdev)
+{
+	struct tc3589x *tc3589x = dev_get_drvdata(pdev->dev.parent);
+	struct device_node *np = pdev->dev.of_node;
+	struct tc3589x_gpio *tc3589x_gpio;
+	struct gpio_irq_chip *girq;
+	int ret;
+	int irq;
+
+	if (!np) {
+		dev_err(&pdev->dev, "No Device Tree node found\n");
+		return -EINVAL;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	tc3589x_gpio = devm_kzalloc(&pdev->dev, sizeof(struct tc3589x_gpio),
+				    GFP_KERNEL);
+	if (!tc3589x_gpio)
+		return -ENOMEM;
+
+	mutex_init(&tc3589x_gpio->irq_lock);
+
+	tc3589x_gpio->dev = &pdev->dev;
+	tc3589x_gpio->tc3589x = tc3589x;
+
+	tc3589x_gpio->chip = template_chip;
+	tc3589x_gpio->chip.ngpio = tc3589x->num_gpio;
+	tc3589x_gpio->chip.parent = &pdev->dev;
+	tc3589x_gpio->chip.base = -1;
+	tc3589x_gpio->chip.of_node = np;
+
+	girq = &tc3589x_gpio->chip.irq;
+	girq->chip = &tc3589x_gpio_irq_chip;
+	/* This will let us handle the parent IRQ in the driver */
+	girq->parent_handler = NULL;
+	girq->num_parents = 0;
+	girq->parents = NULL;
+	girq->default_type = IRQ_TYPE_NONE;
+	girq->handler = handle_simple_irq;
+	girq->threaded = true;
+
+	/* Bring the GPIO module out of reset */
+	ret = tc3589x_set_bits(tc3589x, TC3589x_RSTCTRL,
+			       TC3589x_RSTCTRL_GPIRST, 0);
+	if (ret < 0)
+		return ret;
+
+	 /* For tc35894, have to disable Direct KBD interrupts,
+	  * else IRQST will always be 0x20, IRQN low level, can't
+	  * clear the irq status.
+	  * TODO: need more test on other tc3589x chip.
+	  *
+	  */
+	ret = tc3589x_reg_write(tc3589x, TC3589x_DKBDMSK,
+			TC3589x_DKBDMSK_ELINT | TC3589x_DKBDMSK_EINT);
+	if (ret < 0)
+		return ret;
+
+	ret = devm_request_threaded_irq(&pdev->dev,
+					irq, NULL, tc3589x_gpio_irq,
+					IRQF_ONESHOT, "tc3589x-gpio",
+					tc3589x_gpio);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to get irq: %d\n", ret);
+		return ret;
+	}
+
+	ret = devm_gpiochip_add_data(&pdev->dev, &tc3589x_gpio->chip,
+				     tc3589x_gpio);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to add gpiochip: %d\n", ret);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, tc3589x_gpio);
+
+	return 0;
+}
+
+static struct platform_driver tc3589x_gpio_driver = {
+	.driver.name	= "tc3589x-gpio",
+	.probe		= tc3589x_gpio_probe,
+};
+
+static int __init tc3589x_gpio_init(void)
+{
+	return platform_driver_register(&tc3589x_gpio_driver);
+}
+subsys_initcall(tc3589x_gpio_init);
diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c
new file mode 100644
index 000000000..86568154c
--- /dev/null
+++ b/drivers/gpio/gpio-tegra.c
@@ -0,0 +1,720 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * arch/arm/mach-tegra/gpio.c
+ *
+ * Copyright (c) 2010 Google, Inc
+ * Copyright (c) 2011-2016, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * Author:
+ *	Erik Gilling <konkers@google.com>
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/gpio/driver.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/irqdomain.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/pm.h>
+
+#define GPIO_BANK(x)		((x) >> 5)
+#define GPIO_PORT(x)		(((x) >> 3) & 0x3)
+#define GPIO_BIT(x)		((x) & 0x7)
+
+#define GPIO_REG(tgi, x)	(GPIO_BANK(x) * tgi->soc->bank_stride + \
+					GPIO_PORT(x) * 4)
+
+#define GPIO_CNF(t, x)		(GPIO_REG(t, x) + 0x00)
+#define GPIO_OE(t, x)		(GPIO_REG(t, x) + 0x10)
+#define GPIO_OUT(t, x)		(GPIO_REG(t, x) + 0X20)
+#define GPIO_IN(t, x)		(GPIO_REG(t, x) + 0x30)
+#define GPIO_INT_STA(t, x)	(GPIO_REG(t, x) + 0x40)
+#define GPIO_INT_ENB(t, x)	(GPIO_REG(t, x) + 0x50)
+#define GPIO_INT_LVL(t, x)	(GPIO_REG(t, x) + 0x60)
+#define GPIO_INT_CLR(t, x)	(GPIO_REG(t, x) + 0x70)
+#define GPIO_DBC_CNT(t, x)	(GPIO_REG(t, x) + 0xF0)
+
+
+#define GPIO_MSK_CNF(t, x)	(GPIO_REG(t, x) + t->soc->upper_offset + 0x00)
+#define GPIO_MSK_OE(t, x)	(GPIO_REG(t, x) + t->soc->upper_offset + 0x10)
+#define GPIO_MSK_OUT(t, x)	(GPIO_REG(t, x) + t->soc->upper_offset + 0X20)
+#define GPIO_MSK_DBC_EN(t, x)	(GPIO_REG(t, x) + t->soc->upper_offset + 0x30)
+#define GPIO_MSK_INT_STA(t, x)	(GPIO_REG(t, x) + t->soc->upper_offset + 0x40)
+#define GPIO_MSK_INT_ENB(t, x)	(GPIO_REG(t, x) + t->soc->upper_offset + 0x50)
+#define GPIO_MSK_INT_LVL(t, x)	(GPIO_REG(t, x) + t->soc->upper_offset + 0x60)
+
+#define GPIO_INT_LVL_MASK		0x010101
+#define GPIO_INT_LVL_EDGE_RISING	0x000101
+#define GPIO_INT_LVL_EDGE_FALLING	0x000100
+#define GPIO_INT_LVL_EDGE_BOTH		0x010100
+#define GPIO_INT_LVL_LEVEL_HIGH		0x000001
+#define GPIO_INT_LVL_LEVEL_LOW		0x000000
+
+struct tegra_gpio_info;
+
+struct tegra_gpio_bank {
+	unsigned int bank;
+	unsigned int irq;
+	spinlock_t lvl_lock[4];
+	spinlock_t dbc_lock[4];	/* Lock for updating debounce count register */
+#ifdef CONFIG_PM_SLEEP
+	u32 cnf[4];
+	u32 out[4];
+	u32 oe[4];
+	u32 int_enb[4];
+	u32 int_lvl[4];
+	u32 wake_enb[4];
+	u32 dbc_enb[4];
+#endif
+	u32 dbc_cnt[4];
+	struct tegra_gpio_info *tgi;
+};
+
+struct tegra_gpio_soc_config {
+	bool debounce_supported;
+	u32 bank_stride;
+	u32 upper_offset;
+};
+
+struct tegra_gpio_info {
+	struct device				*dev;
+	void __iomem				*regs;
+	struct irq_domain			*irq_domain;
+	struct tegra_gpio_bank			*bank_info;
+	const struct tegra_gpio_soc_config	*soc;
+	struct gpio_chip			gc;
+	struct irq_chip				ic;
+	u32					bank_count;
+};
+
+static inline void tegra_gpio_writel(struct tegra_gpio_info *tgi,
+				     u32 val, u32 reg)
+{
+	writel_relaxed(val, tgi->regs + reg);
+}
+
+static inline u32 tegra_gpio_readl(struct tegra_gpio_info *tgi, u32 reg)
+{
+	return readl_relaxed(tgi->regs + reg);
+}
+
+static unsigned int tegra_gpio_compose(unsigned int bank, unsigned int port,
+				       unsigned int bit)
+{
+	return (bank << 5) | ((port & 0x3) << 3) | (bit & 0x7);
+}
+
+static void tegra_gpio_mask_write(struct tegra_gpio_info *tgi, u32 reg,
+				  unsigned int gpio, u32 value)
+{
+	u32 val;
+
+	val = 0x100 << GPIO_BIT(gpio);
+	if (value)
+		val |= 1 << GPIO_BIT(gpio);
+	tegra_gpio_writel(tgi, val, reg);
+}
+
+static void tegra_gpio_enable(struct tegra_gpio_info *tgi, unsigned int gpio)
+{
+	tegra_gpio_mask_write(tgi, GPIO_MSK_CNF(tgi, gpio), gpio, 1);
+}
+
+static void tegra_gpio_disable(struct tegra_gpio_info *tgi, unsigned int gpio)
+{
+	tegra_gpio_mask_write(tgi, GPIO_MSK_CNF(tgi, gpio), gpio, 0);
+}
+
+static int tegra_gpio_request(struct gpio_chip *chip, unsigned int offset)
+{
+	return pinctrl_gpio_request(chip->base + offset);
+}
+
+static void tegra_gpio_free(struct gpio_chip *chip, unsigned int offset)
+{
+	struct tegra_gpio_info *tgi = gpiochip_get_data(chip);
+
+	pinctrl_gpio_free(chip->base + offset);
+	tegra_gpio_disable(tgi, offset);
+}
+
+static void tegra_gpio_set(struct gpio_chip *chip, unsigned int offset,
+			   int value)
+{
+	struct tegra_gpio_info *tgi = gpiochip_get_data(chip);
+
+	tegra_gpio_mask_write(tgi, GPIO_MSK_OUT(tgi, offset), offset, value);
+}
+
+static int tegra_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+	struct tegra_gpio_info *tgi = gpiochip_get_data(chip);
+	unsigned int bval = BIT(GPIO_BIT(offset));
+
+	/* If gpio is in output mode then read from the out value */
+	if (tegra_gpio_readl(tgi, GPIO_OE(tgi, offset)) & bval)
+		return !!(tegra_gpio_readl(tgi, GPIO_OUT(tgi, offset)) & bval);
+
+	return !!(tegra_gpio_readl(tgi, GPIO_IN(tgi, offset)) & bval);
+}
+
+static int tegra_gpio_direction_input(struct gpio_chip *chip,
+				      unsigned int offset)
+{
+	struct tegra_gpio_info *tgi = gpiochip_get_data(chip);
+	int ret;
+
+	tegra_gpio_mask_write(tgi, GPIO_MSK_OE(tgi, offset), offset, 0);
+	tegra_gpio_enable(tgi, offset);
+
+	ret = pinctrl_gpio_direction_input(chip->base + offset);
+	if (ret < 0)
+		dev_err(tgi->dev,
+			"Failed to set pinctrl input direction of GPIO %d: %d",
+			 chip->base + offset, ret);
+
+	return ret;
+}
+
+static int tegra_gpio_direction_output(struct gpio_chip *chip,
+				       unsigned int offset,
+				       int value)
+{
+	struct tegra_gpio_info *tgi = gpiochip_get_data(chip);
+	int ret;
+
+	tegra_gpio_set(chip, offset, value);
+	tegra_gpio_mask_write(tgi, GPIO_MSK_OE(tgi, offset), offset, 1);
+	tegra_gpio_enable(tgi, offset);
+
+	ret = pinctrl_gpio_direction_output(chip->base + offset);
+	if (ret < 0)
+		dev_err(tgi->dev,
+			"Failed to set pinctrl output direction of GPIO %d: %d",
+			 chip->base + offset, ret);
+
+	return ret;
+}
+
+static int tegra_gpio_get_direction(struct gpio_chip *chip,
+				    unsigned int offset)
+{
+	struct tegra_gpio_info *tgi = gpiochip_get_data(chip);
+	u32 pin_mask = BIT(GPIO_BIT(offset));
+	u32 cnf, oe;
+
+	cnf = tegra_gpio_readl(tgi, GPIO_CNF(tgi, offset));
+	if (!(cnf & pin_mask))
+		return -EINVAL;
+
+	oe = tegra_gpio_readl(tgi, GPIO_OE(tgi, offset));
+
+	if (oe & pin_mask)
+		return GPIO_LINE_DIRECTION_OUT;
+
+	return GPIO_LINE_DIRECTION_IN;
+}
+
+static int tegra_gpio_set_debounce(struct gpio_chip *chip, unsigned int offset,
+				   unsigned int debounce)
+{
+	struct tegra_gpio_info *tgi = gpiochip_get_data(chip);
+	struct tegra_gpio_bank *bank = &tgi->bank_info[GPIO_BANK(offset)];
+	unsigned int debounce_ms = DIV_ROUND_UP(debounce, 1000);
+	unsigned long flags;
+	unsigned int port;
+
+	if (!debounce_ms) {
+		tegra_gpio_mask_write(tgi, GPIO_MSK_DBC_EN(tgi, offset),
+				      offset, 0);
+		return 0;
+	}
+
+	debounce_ms = min(debounce_ms, 255U);
+	port = GPIO_PORT(offset);
+
+	/* There is only one debounce count register per port and hence
+	 * set the maximum of current and requested debounce time.
+	 */
+	spin_lock_irqsave(&bank->dbc_lock[port], flags);
+	if (bank->dbc_cnt[port] < debounce_ms) {
+		tegra_gpio_writel(tgi, debounce_ms, GPIO_DBC_CNT(tgi, offset));
+		bank->dbc_cnt[port] = debounce_ms;
+	}
+	spin_unlock_irqrestore(&bank->dbc_lock[port], flags);
+
+	tegra_gpio_mask_write(tgi, GPIO_MSK_DBC_EN(tgi, offset), offset, 1);
+
+	return 0;
+}
+
+static int tegra_gpio_set_config(struct gpio_chip *chip, unsigned int offset,
+				 unsigned long config)
+{
+	u32 debounce;
+
+	if (pinconf_to_config_param(config) != PIN_CONFIG_INPUT_DEBOUNCE)
+		return -ENOTSUPP;
+
+	debounce = pinconf_to_config_argument(config);
+	return tegra_gpio_set_debounce(chip, offset, debounce);
+}
+
+static int tegra_gpio_to_irq(struct gpio_chip *chip, unsigned int offset)
+{
+	struct tegra_gpio_info *tgi = gpiochip_get_data(chip);
+
+	return irq_find_mapping(tgi->irq_domain, offset);
+}
+
+static void tegra_gpio_irq_ack(struct irq_data *d)
+{
+	struct tegra_gpio_bank *bank = irq_data_get_irq_chip_data(d);
+	struct tegra_gpio_info *tgi = bank->tgi;
+	unsigned int gpio = d->hwirq;
+
+	tegra_gpio_writel(tgi, 1 << GPIO_BIT(gpio), GPIO_INT_CLR(tgi, gpio));
+}
+
+static void tegra_gpio_irq_mask(struct irq_data *d)
+{
+	struct tegra_gpio_bank *bank = irq_data_get_irq_chip_data(d);
+	struct tegra_gpio_info *tgi = bank->tgi;
+	unsigned int gpio = d->hwirq;
+
+	tegra_gpio_mask_write(tgi, GPIO_MSK_INT_ENB(tgi, gpio), gpio, 0);
+}
+
+static void tegra_gpio_irq_unmask(struct irq_data *d)
+{
+	struct tegra_gpio_bank *bank = irq_data_get_irq_chip_data(d);
+	struct tegra_gpio_info *tgi = bank->tgi;
+	unsigned int gpio = d->hwirq;
+
+	tegra_gpio_mask_write(tgi, GPIO_MSK_INT_ENB(tgi, gpio), gpio, 1);
+}
+
+static int tegra_gpio_irq_set_type(struct irq_data *d, unsigned int type)
+{
+	unsigned int gpio = d->hwirq, port = GPIO_PORT(gpio), lvl_type;
+	struct tegra_gpio_bank *bank = irq_data_get_irq_chip_data(d);
+	struct tegra_gpio_info *tgi = bank->tgi;
+	unsigned long flags;
+	u32 val;
+	int ret;
+
+	switch (type & IRQ_TYPE_SENSE_MASK) {
+	case IRQ_TYPE_EDGE_RISING:
+		lvl_type = GPIO_INT_LVL_EDGE_RISING;
+		break;
+
+	case IRQ_TYPE_EDGE_FALLING:
+		lvl_type = GPIO_INT_LVL_EDGE_FALLING;
+		break;
+
+	case IRQ_TYPE_EDGE_BOTH:
+		lvl_type = GPIO_INT_LVL_EDGE_BOTH;
+		break;
+
+	case IRQ_TYPE_LEVEL_HIGH:
+		lvl_type = GPIO_INT_LVL_LEVEL_HIGH;
+		break;
+
+	case IRQ_TYPE_LEVEL_LOW:
+		lvl_type = GPIO_INT_LVL_LEVEL_LOW;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&bank->lvl_lock[port], flags);
+
+	val = tegra_gpio_readl(tgi, GPIO_INT_LVL(tgi, gpio));
+	val &= ~(GPIO_INT_LVL_MASK << GPIO_BIT(gpio));
+	val |= lvl_type << GPIO_BIT(gpio);
+	tegra_gpio_writel(tgi, val, GPIO_INT_LVL(tgi, gpio));
+
+	spin_unlock_irqrestore(&bank->lvl_lock[port], flags);
+
+	tegra_gpio_mask_write(tgi, GPIO_MSK_OE(tgi, gpio), gpio, 0);
+	tegra_gpio_enable(tgi, gpio);
+
+	ret = gpiochip_lock_as_irq(&tgi->gc, gpio);
+	if (ret) {
+		dev_err(tgi->dev,
+			"unable to lock Tegra GPIO %u as IRQ\n", gpio);
+		tegra_gpio_disable(tgi, gpio);
+		return ret;
+	}
+
+	if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
+		irq_set_handler_locked(d, handle_level_irq);
+	else if (type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
+		irq_set_handler_locked(d, handle_edge_irq);
+
+	return 0;
+}
+
+static void tegra_gpio_irq_shutdown(struct irq_data *d)
+{
+	struct tegra_gpio_bank *bank = irq_data_get_irq_chip_data(d);
+	struct tegra_gpio_info *tgi = bank->tgi;
+	unsigned int gpio = d->hwirq;
+
+	tegra_gpio_irq_mask(d);
+	gpiochip_unlock_as_irq(&tgi->gc, gpio);
+}
+
+static void tegra_gpio_irq_handler(struct irq_desc *desc)
+{
+	unsigned int port, pin, gpio;
+	bool unmasked = false;
+	u32 lvl;
+	unsigned long sta;
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+	struct tegra_gpio_bank *bank = irq_desc_get_handler_data(desc);
+	struct tegra_gpio_info *tgi = bank->tgi;
+
+	chained_irq_enter(chip, desc);
+
+	for (port = 0; port < 4; port++) {
+		gpio = tegra_gpio_compose(bank->bank, port, 0);
+		sta = tegra_gpio_readl(tgi, GPIO_INT_STA(tgi, gpio)) &
+			tegra_gpio_readl(tgi, GPIO_INT_ENB(tgi, gpio));
+		lvl = tegra_gpio_readl(tgi, GPIO_INT_LVL(tgi, gpio));
+
+		for_each_set_bit(pin, &sta, 8) {
+			tegra_gpio_writel(tgi, 1 << pin,
+					  GPIO_INT_CLR(tgi, gpio));
+
+			/* if gpio is edge triggered, clear condition
+			 * before executing the handler so that we don't
+			 * miss edges
+			 */
+			if (!unmasked && lvl & (0x100 << pin)) {
+				unmasked = true;
+				chained_irq_exit(chip, desc);
+			}
+
+			generic_handle_irq(irq_find_mapping(tgi->irq_domain,
+							    gpio + pin));
+		}
+	}
+
+	if (!unmasked)
+		chained_irq_exit(chip, desc);
+
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int tegra_gpio_resume(struct device *dev)
+{
+	struct tegra_gpio_info *tgi = dev_get_drvdata(dev);
+	unsigned int b, p;
+
+	for (b = 0; b < tgi->bank_count; b++) {
+		struct tegra_gpio_bank *bank = &tgi->bank_info[b];
+
+		for (p = 0; p < ARRAY_SIZE(bank->oe); p++) {
+			unsigned int gpio = (b << 5) | (p << 3);
+
+			tegra_gpio_writel(tgi, bank->cnf[p],
+					  GPIO_CNF(tgi, gpio));
+
+			if (tgi->soc->debounce_supported) {
+				tegra_gpio_writel(tgi, bank->dbc_cnt[p],
+						  GPIO_DBC_CNT(tgi, gpio));
+				tegra_gpio_writel(tgi, bank->dbc_enb[p],
+						  GPIO_MSK_DBC_EN(tgi, gpio));
+			}
+
+			tegra_gpio_writel(tgi, bank->out[p],
+					  GPIO_OUT(tgi, gpio));
+			tegra_gpio_writel(tgi, bank->oe[p],
+					  GPIO_OE(tgi, gpio));
+			tegra_gpio_writel(tgi, bank->int_lvl[p],
+					  GPIO_INT_LVL(tgi, gpio));
+			tegra_gpio_writel(tgi, bank->int_enb[p],
+					  GPIO_INT_ENB(tgi, gpio));
+		}
+	}
+
+	return 0;
+}
+
+static int tegra_gpio_suspend(struct device *dev)
+{
+	struct tegra_gpio_info *tgi = dev_get_drvdata(dev);
+	unsigned int b, p;
+
+	for (b = 0; b < tgi->bank_count; b++) {
+		struct tegra_gpio_bank *bank = &tgi->bank_info[b];
+
+		for (p = 0; p < ARRAY_SIZE(bank->oe); p++) {
+			unsigned int gpio = (b << 5) | (p << 3);
+
+			bank->cnf[p] = tegra_gpio_readl(tgi,
+							GPIO_CNF(tgi, gpio));
+			bank->out[p] = tegra_gpio_readl(tgi,
+							GPIO_OUT(tgi, gpio));
+			bank->oe[p] = tegra_gpio_readl(tgi,
+						       GPIO_OE(tgi, gpio));
+			if (tgi->soc->debounce_supported) {
+				bank->dbc_enb[p] = tegra_gpio_readl(tgi,
+						GPIO_MSK_DBC_EN(tgi, gpio));
+				bank->dbc_enb[p] = (bank->dbc_enb[p] << 8) |
+							bank->dbc_enb[p];
+			}
+
+			bank->int_enb[p] = tegra_gpio_readl(tgi,
+						GPIO_INT_ENB(tgi, gpio));
+			bank->int_lvl[p] = tegra_gpio_readl(tgi,
+						GPIO_INT_LVL(tgi, gpio));
+
+			/* Enable gpio irq for wake up source */
+			tegra_gpio_writel(tgi, bank->wake_enb[p],
+					  GPIO_INT_ENB(tgi, gpio));
+		}
+	}
+
+	return 0;
+}
+
+static int tegra_gpio_irq_set_wake(struct irq_data *d, unsigned int enable)
+{
+	struct tegra_gpio_bank *bank = irq_data_get_irq_chip_data(d);
+	unsigned int gpio = d->hwirq;
+	u32 port, bit, mask;
+	int err;
+
+	err = irq_set_irq_wake(bank->irq, enable);
+	if (err)
+		return err;
+
+	port = GPIO_PORT(gpio);
+	bit = GPIO_BIT(gpio);
+	mask = BIT(bit);
+
+	if (enable)
+		bank->wake_enb[port] |= mask;
+	else
+		bank->wake_enb[port] &= ~mask;
+
+	return 0;
+}
+#endif
+
+#ifdef	CONFIG_DEBUG_FS
+
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+
+static int tegra_dbg_gpio_show(struct seq_file *s, void *unused)
+{
+	struct tegra_gpio_info *tgi = s->private;
+	unsigned int i, j;
+
+	for (i = 0; i < tgi->bank_count; i++) {
+		for (j = 0; j < 4; j++) {
+			unsigned int gpio = tegra_gpio_compose(i, j, 0);
+
+			seq_printf(s,
+				"%u:%u %02x %02x %02x %02x %02x %02x %06x\n",
+				i, j,
+				tegra_gpio_readl(tgi, GPIO_CNF(tgi, gpio)),
+				tegra_gpio_readl(tgi, GPIO_OE(tgi, gpio)),
+				tegra_gpio_readl(tgi, GPIO_OUT(tgi, gpio)),
+				tegra_gpio_readl(tgi, GPIO_IN(tgi, gpio)),
+				tegra_gpio_readl(tgi, GPIO_INT_STA(tgi, gpio)),
+				tegra_gpio_readl(tgi, GPIO_INT_ENB(tgi, gpio)),
+				tegra_gpio_readl(tgi, GPIO_INT_LVL(tgi, gpio)));
+		}
+	}
+	return 0;
+}
+
+DEFINE_SHOW_ATTRIBUTE(tegra_dbg_gpio);
+
+static void tegra_gpio_debuginit(struct tegra_gpio_info *tgi)
+{
+	debugfs_create_file("tegra_gpio", 0444, NULL, tgi,
+			    &tegra_dbg_gpio_fops);
+}
+
+#else
+
+static inline void tegra_gpio_debuginit(struct tegra_gpio_info *tgi)
+{
+}
+
+#endif
+
+static const struct dev_pm_ops tegra_gpio_pm_ops = {
+	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(tegra_gpio_suspend, tegra_gpio_resume)
+};
+
+static int tegra_gpio_probe(struct platform_device *pdev)
+{
+	struct tegra_gpio_info *tgi;
+	struct tegra_gpio_bank *bank;
+	unsigned int gpio, i, j;
+	int ret;
+
+	tgi = devm_kzalloc(&pdev->dev, sizeof(*tgi), GFP_KERNEL);
+	if (!tgi)
+		return -ENODEV;
+
+	tgi->soc = of_device_get_match_data(&pdev->dev);
+	tgi->dev = &pdev->dev;
+
+	ret = platform_irq_count(pdev);
+	if (ret < 0)
+		return ret;
+
+	tgi->bank_count = ret;
+
+	if (!tgi->bank_count) {
+		dev_err(&pdev->dev, "Missing IRQ resource\n");
+		return -ENODEV;
+	}
+
+	tgi->gc.label			= "tegra-gpio";
+	tgi->gc.request			= tegra_gpio_request;
+	tgi->gc.free			= tegra_gpio_free;
+	tgi->gc.direction_input		= tegra_gpio_direction_input;
+	tgi->gc.get			= tegra_gpio_get;
+	tgi->gc.direction_output	= tegra_gpio_direction_output;
+	tgi->gc.set			= tegra_gpio_set;
+	tgi->gc.get_direction		= tegra_gpio_get_direction;
+	tgi->gc.to_irq			= tegra_gpio_to_irq;
+	tgi->gc.base			= 0;
+	tgi->gc.ngpio			= tgi->bank_count * 32;
+	tgi->gc.parent			= &pdev->dev;
+	tgi->gc.of_node			= pdev->dev.of_node;
+
+	tgi->ic.name			= "GPIO";
+	tgi->ic.irq_ack			= tegra_gpio_irq_ack;
+	tgi->ic.irq_mask		= tegra_gpio_irq_mask;
+	tgi->ic.irq_unmask		= tegra_gpio_irq_unmask;
+	tgi->ic.irq_set_type		= tegra_gpio_irq_set_type;
+	tgi->ic.irq_shutdown		= tegra_gpio_irq_shutdown;
+#ifdef CONFIG_PM_SLEEP
+	tgi->ic.irq_set_wake		= tegra_gpio_irq_set_wake;
+#endif
+
+	platform_set_drvdata(pdev, tgi);
+
+	if (tgi->soc->debounce_supported)
+		tgi->gc.set_config = tegra_gpio_set_config;
+
+	tgi->bank_info = devm_kcalloc(&pdev->dev, tgi->bank_count,
+				      sizeof(*tgi->bank_info), GFP_KERNEL);
+	if (!tgi->bank_info)
+		return -ENOMEM;
+
+	tgi->irq_domain = irq_domain_add_linear(pdev->dev.of_node,
+						tgi->gc.ngpio,
+						&irq_domain_simple_ops, NULL);
+	if (!tgi->irq_domain)
+		return -ENODEV;
+
+	for (i = 0; i < tgi->bank_count; i++) {
+		ret = platform_get_irq(pdev, i);
+		if (ret < 0)
+			return ret;
+
+		bank = &tgi->bank_info[i];
+		bank->bank = i;
+		bank->irq = ret;
+		bank->tgi = tgi;
+	}
+
+	tgi->regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(tgi->regs))
+		return PTR_ERR(tgi->regs);
+
+	for (i = 0; i < tgi->bank_count; i++) {
+		for (j = 0; j < 4; j++) {
+			int gpio = tegra_gpio_compose(i, j, 0);
+
+			tegra_gpio_writel(tgi, 0x00, GPIO_INT_ENB(tgi, gpio));
+		}
+	}
+
+	ret = devm_gpiochip_add_data(&pdev->dev, &tgi->gc, tgi);
+	if (ret < 0) {
+		irq_domain_remove(tgi->irq_domain);
+		return ret;
+	}
+
+	for (gpio = 0; gpio < tgi->gc.ngpio; gpio++) {
+		int irq = irq_create_mapping(tgi->irq_domain, gpio);
+		/* No validity check; all Tegra GPIOs are valid IRQs */
+
+		bank = &tgi->bank_info[GPIO_BANK(gpio)];
+
+		irq_set_chip_data(irq, bank);
+		irq_set_chip_and_handler(irq, &tgi->ic, handle_simple_irq);
+	}
+
+	for (i = 0; i < tgi->bank_count; i++) {
+		bank = &tgi->bank_info[i];
+
+		irq_set_chained_handler_and_data(bank->irq,
+						 tegra_gpio_irq_handler, bank);
+
+		for (j = 0; j < 4; j++) {
+			spin_lock_init(&bank->lvl_lock[j]);
+			spin_lock_init(&bank->dbc_lock[j]);
+		}
+	}
+
+	tegra_gpio_debuginit(tgi);
+
+	return 0;
+}
+
+static const struct tegra_gpio_soc_config tegra20_gpio_config = {
+	.bank_stride = 0x80,
+	.upper_offset = 0x800,
+};
+
+static const struct tegra_gpio_soc_config tegra30_gpio_config = {
+	.bank_stride = 0x100,
+	.upper_offset = 0x80,
+};
+
+static const struct tegra_gpio_soc_config tegra210_gpio_config = {
+	.debounce_supported = true,
+	.bank_stride = 0x100,
+	.upper_offset = 0x80,
+};
+
+static const struct of_device_id tegra_gpio_of_match[] = {
+	{ .compatible = "nvidia,tegra210-gpio", .data = &tegra210_gpio_config },
+	{ .compatible = "nvidia,tegra30-gpio", .data = &tegra30_gpio_config },
+	{ .compatible = "nvidia,tegra20-gpio", .data = &tegra20_gpio_config },
+	{ },
+};
+
+static struct platform_driver tegra_gpio_driver = {
+	.driver		= {
+		.name	= "tegra-gpio",
+		.pm	= &tegra_gpio_pm_ops,
+		.of_match_table = tegra_gpio_of_match,
+	},
+	.probe		= tegra_gpio_probe,
+};
+
+static int __init tegra_gpio_init(void)
+{
+	return platform_driver_register(&tegra_gpio_driver);
+}
+subsys_initcall(tegra_gpio_init);
diff --git a/drivers/gpio/gpio-tegra186.c b/drivers/gpio/gpio-tegra186.c
new file mode 100644
index 000000000..7fbe5f068
--- /dev/null
+++ b/drivers/gpio/gpio-tegra186.c
@@ -0,0 +1,928 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2016-2017 NVIDIA Corporation
+ *
+ * Author: Thierry Reding <treding@nvidia.com>
+ */
+
+#include <linux/gpio/driver.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+#include <dt-bindings/gpio/tegra186-gpio.h>
+#include <dt-bindings/gpio/tegra194-gpio.h>
+
+/* security registers */
+#define TEGRA186_GPIO_CTL_SCR 0x0c
+#define  TEGRA186_GPIO_CTL_SCR_SEC_WEN BIT(28)
+#define  TEGRA186_GPIO_CTL_SCR_SEC_REN BIT(27)
+
+#define TEGRA186_GPIO_INT_ROUTE_MAPPING(p, x) (0x14 + (p) * 0x20 + (x) * 4)
+
+/* control registers */
+#define TEGRA186_GPIO_ENABLE_CONFIG 0x00
+#define  TEGRA186_GPIO_ENABLE_CONFIG_ENABLE BIT(0)
+#define  TEGRA186_GPIO_ENABLE_CONFIG_OUT BIT(1)
+#define  TEGRA186_GPIO_ENABLE_CONFIG_TRIGGER_TYPE_NONE (0x0 << 2)
+#define  TEGRA186_GPIO_ENABLE_CONFIG_TRIGGER_TYPE_LEVEL (0x1 << 2)
+#define  TEGRA186_GPIO_ENABLE_CONFIG_TRIGGER_TYPE_SINGLE_EDGE (0x2 << 2)
+#define  TEGRA186_GPIO_ENABLE_CONFIG_TRIGGER_TYPE_DOUBLE_EDGE (0x3 << 2)
+#define  TEGRA186_GPIO_ENABLE_CONFIG_TRIGGER_TYPE_MASK (0x3 << 2)
+#define  TEGRA186_GPIO_ENABLE_CONFIG_TRIGGER_LEVEL BIT(4)
+#define  TEGRA186_GPIO_ENABLE_CONFIG_DEBOUNCE BIT(5)
+#define  TEGRA186_GPIO_ENABLE_CONFIG_INTERRUPT BIT(6)
+
+#define TEGRA186_GPIO_DEBOUNCE_CONTROL 0x04
+#define  TEGRA186_GPIO_DEBOUNCE_CONTROL_THRESHOLD(x) ((x) & 0xff)
+
+#define TEGRA186_GPIO_INPUT 0x08
+#define  TEGRA186_GPIO_INPUT_HIGH BIT(0)
+
+#define TEGRA186_GPIO_OUTPUT_CONTROL 0x0c
+#define  TEGRA186_GPIO_OUTPUT_CONTROL_FLOATED BIT(0)
+
+#define TEGRA186_GPIO_OUTPUT_VALUE 0x10
+#define  TEGRA186_GPIO_OUTPUT_VALUE_HIGH BIT(0)
+
+#define TEGRA186_GPIO_INTERRUPT_CLEAR 0x14
+
+#define TEGRA186_GPIO_INTERRUPT_STATUS(x) (0x100 + (x) * 4)
+
+struct tegra_gpio_port {
+	const char *name;
+	unsigned int bank;
+	unsigned int port;
+	unsigned int pins;
+};
+
+struct tegra186_pin_range {
+	unsigned int offset;
+	const char *group;
+};
+
+struct tegra_gpio_soc {
+	const struct tegra_gpio_port *ports;
+	unsigned int num_ports;
+	const char *name;
+	unsigned int instance;
+
+	const struct tegra186_pin_range *pin_ranges;
+	unsigned int num_pin_ranges;
+	const char *pinmux;
+};
+
+struct tegra_gpio {
+	struct gpio_chip gpio;
+	struct irq_chip intc;
+	unsigned int num_irq;
+	unsigned int *irq;
+
+	const struct tegra_gpio_soc *soc;
+
+	void __iomem *secure;
+	void __iomem *base;
+};
+
+static const struct tegra_gpio_port *
+tegra186_gpio_get_port(struct tegra_gpio *gpio, unsigned int *pin)
+{
+	unsigned int start = 0, i;
+
+	for (i = 0; i < gpio->soc->num_ports; i++) {
+		const struct tegra_gpio_port *port = &gpio->soc->ports[i];
+
+		if (*pin >= start && *pin < start + port->pins) {
+			*pin -= start;
+			return port;
+		}
+
+		start += port->pins;
+	}
+
+	return NULL;
+}
+
+static void __iomem *tegra186_gpio_get_base(struct tegra_gpio *gpio,
+					    unsigned int pin)
+{
+	const struct tegra_gpio_port *port;
+	unsigned int offset;
+
+	port = tegra186_gpio_get_port(gpio, &pin);
+	if (!port)
+		return NULL;
+
+	offset = port->bank * 0x1000 + port->port * 0x200;
+
+	return gpio->base + offset + pin * 0x20;
+}
+
+static int tegra186_gpio_get_direction(struct gpio_chip *chip,
+				       unsigned int offset)
+{
+	struct tegra_gpio *gpio = gpiochip_get_data(chip);
+	void __iomem *base;
+	u32 value;
+
+	base = tegra186_gpio_get_base(gpio, offset);
+	if (WARN_ON(base == NULL))
+		return -ENODEV;
+
+	value = readl(base + TEGRA186_GPIO_ENABLE_CONFIG);
+	if (value & TEGRA186_GPIO_ENABLE_CONFIG_OUT)
+		return GPIO_LINE_DIRECTION_OUT;
+
+	return GPIO_LINE_DIRECTION_IN;
+}
+
+static int tegra186_gpio_direction_input(struct gpio_chip *chip,
+					 unsigned int offset)
+{
+	struct tegra_gpio *gpio = gpiochip_get_data(chip);
+	void __iomem *base;
+	u32 value;
+
+	base = tegra186_gpio_get_base(gpio, offset);
+	if (WARN_ON(base == NULL))
+		return -ENODEV;
+
+	value = readl(base + TEGRA186_GPIO_OUTPUT_CONTROL);
+	value |= TEGRA186_GPIO_OUTPUT_CONTROL_FLOATED;
+	writel(value, base + TEGRA186_GPIO_OUTPUT_CONTROL);
+
+	value = readl(base + TEGRA186_GPIO_ENABLE_CONFIG);
+	value |= TEGRA186_GPIO_ENABLE_CONFIG_ENABLE;
+	value &= ~TEGRA186_GPIO_ENABLE_CONFIG_OUT;
+	writel(value, base + TEGRA186_GPIO_ENABLE_CONFIG);
+
+	return 0;
+}
+
+static int tegra186_gpio_direction_output(struct gpio_chip *chip,
+					  unsigned int offset, int level)
+{
+	struct tegra_gpio *gpio = gpiochip_get_data(chip);
+	void __iomem *base;
+	u32 value;
+
+	/* configure output level first */
+	chip->set(chip, offset, level);
+
+	base = tegra186_gpio_get_base(gpio, offset);
+	if (WARN_ON(base == NULL))
+		return -EINVAL;
+
+	/* set the direction */
+	value = readl(base + TEGRA186_GPIO_OUTPUT_CONTROL);
+	value &= ~TEGRA186_GPIO_OUTPUT_CONTROL_FLOATED;
+	writel(value, base + TEGRA186_GPIO_OUTPUT_CONTROL);
+
+	value = readl(base + TEGRA186_GPIO_ENABLE_CONFIG);
+	value |= TEGRA186_GPIO_ENABLE_CONFIG_ENABLE;
+	value |= TEGRA186_GPIO_ENABLE_CONFIG_OUT;
+	writel(value, base + TEGRA186_GPIO_ENABLE_CONFIG);
+
+	return 0;
+}
+
+static int tegra186_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+	struct tegra_gpio *gpio = gpiochip_get_data(chip);
+	void __iomem *base;
+	u32 value;
+
+	base = tegra186_gpio_get_base(gpio, offset);
+	if (WARN_ON(base == NULL))
+		return -ENODEV;
+
+	value = readl(base + TEGRA186_GPIO_ENABLE_CONFIG);
+	if (value & TEGRA186_GPIO_ENABLE_CONFIG_OUT)
+		value = readl(base + TEGRA186_GPIO_OUTPUT_VALUE);
+	else
+		value = readl(base + TEGRA186_GPIO_INPUT);
+
+	return value & BIT(0);
+}
+
+static void tegra186_gpio_set(struct gpio_chip *chip, unsigned int offset,
+			      int level)
+{
+	struct tegra_gpio *gpio = gpiochip_get_data(chip);
+	void __iomem *base;
+	u32 value;
+
+	base = tegra186_gpio_get_base(gpio, offset);
+	if (WARN_ON(base == NULL))
+		return;
+
+	value = readl(base + TEGRA186_GPIO_OUTPUT_VALUE);
+	if (level == 0)
+		value &= ~TEGRA186_GPIO_OUTPUT_VALUE_HIGH;
+	else
+		value |= TEGRA186_GPIO_OUTPUT_VALUE_HIGH;
+
+	writel(value, base + TEGRA186_GPIO_OUTPUT_VALUE);
+}
+
+static int tegra186_gpio_set_config(struct gpio_chip *chip,
+				    unsigned int offset,
+				    unsigned long config)
+{
+	struct tegra_gpio *gpio = gpiochip_get_data(chip);
+	u32 debounce, value;
+	void __iomem *base;
+
+	base = tegra186_gpio_get_base(gpio, offset);
+	if (base == NULL)
+		return -ENXIO;
+
+	if (pinconf_to_config_param(config) != PIN_CONFIG_INPUT_DEBOUNCE)
+		return -ENOTSUPP;
+
+	debounce = pinconf_to_config_argument(config);
+
+	/*
+	 * The Tegra186 GPIO controller supports a maximum of 255 ms debounce
+	 * time.
+	 */
+	if (debounce > 255000)
+		return -EINVAL;
+
+	debounce = DIV_ROUND_UP(debounce, USEC_PER_MSEC);
+
+	value = TEGRA186_GPIO_DEBOUNCE_CONTROL_THRESHOLD(debounce);
+	writel(value, base + TEGRA186_GPIO_DEBOUNCE_CONTROL);
+
+	value = readl(base + TEGRA186_GPIO_ENABLE_CONFIG);
+	value |= TEGRA186_GPIO_ENABLE_CONFIG_DEBOUNCE;
+	writel(value, base + TEGRA186_GPIO_ENABLE_CONFIG);
+
+	return 0;
+}
+
+static int tegra186_gpio_add_pin_ranges(struct gpio_chip *chip)
+{
+	struct tegra_gpio *gpio = gpiochip_get_data(chip);
+	struct pinctrl_dev *pctldev;
+	struct device_node *np;
+	unsigned int i, j;
+	int err;
+
+	if (!gpio->soc->pinmux || gpio->soc->num_pin_ranges == 0)
+		return 0;
+
+	np = of_find_compatible_node(NULL, NULL, gpio->soc->pinmux);
+	if (!np)
+		return -ENODEV;
+
+	pctldev = of_pinctrl_get(np);
+	of_node_put(np);
+	if (!pctldev)
+		return -EPROBE_DEFER;
+
+	for (i = 0; i < gpio->soc->num_pin_ranges; i++) {
+		unsigned int pin = gpio->soc->pin_ranges[i].offset, port;
+		const char *group = gpio->soc->pin_ranges[i].group;
+
+		port = pin / 8;
+		pin = pin % 8;
+
+		if (port >= gpio->soc->num_ports) {
+			dev_warn(chip->parent, "invalid port %u for %s\n",
+				 port, group);
+			continue;
+		}
+
+		for (j = 0; j < port; j++)
+			pin += gpio->soc->ports[j].pins;
+
+		err = gpiochip_add_pingroup_range(chip, pctldev, pin, group);
+		if (err < 0)
+			return err;
+	}
+
+	return 0;
+}
+
+static int tegra186_gpio_of_xlate(struct gpio_chip *chip,
+				  const struct of_phandle_args *spec,
+				  u32 *flags)
+{
+	struct tegra_gpio *gpio = gpiochip_get_data(chip);
+	unsigned int port, pin, i, offset = 0;
+
+	if (WARN_ON(chip->of_gpio_n_cells < 2))
+		return -EINVAL;
+
+	if (WARN_ON(spec->args_count < chip->of_gpio_n_cells))
+		return -EINVAL;
+
+	port = spec->args[0] / 8;
+	pin = spec->args[0] % 8;
+
+	if (port >= gpio->soc->num_ports) {
+		dev_err(chip->parent, "invalid port number: %u\n", port);
+		return -EINVAL;
+	}
+
+	for (i = 0; i < port; i++)
+		offset += gpio->soc->ports[i].pins;
+
+	if (flags)
+		*flags = spec->args[1];
+
+	return offset + pin;
+}
+
+#define to_tegra_gpio(x) container_of((x), struct tegra_gpio, gpio)
+
+static void tegra186_irq_ack(struct irq_data *data)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(data);
+	struct tegra_gpio *gpio = to_tegra_gpio(gc);
+	void __iomem *base;
+
+	base = tegra186_gpio_get_base(gpio, data->hwirq);
+	if (WARN_ON(base == NULL))
+		return;
+
+	writel(1, base + TEGRA186_GPIO_INTERRUPT_CLEAR);
+}
+
+static void tegra186_irq_mask(struct irq_data *data)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(data);
+	struct tegra_gpio *gpio = to_tegra_gpio(gc);
+	void __iomem *base;
+	u32 value;
+
+	base = tegra186_gpio_get_base(gpio, data->hwirq);
+	if (WARN_ON(base == NULL))
+		return;
+
+	value = readl(base + TEGRA186_GPIO_ENABLE_CONFIG);
+	value &= ~TEGRA186_GPIO_ENABLE_CONFIG_INTERRUPT;
+	writel(value, base + TEGRA186_GPIO_ENABLE_CONFIG);
+}
+
+static void tegra186_irq_unmask(struct irq_data *data)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(data);
+	struct tegra_gpio *gpio = to_tegra_gpio(gc);
+	void __iomem *base;
+	u32 value;
+
+	base = tegra186_gpio_get_base(gpio, data->hwirq);
+	if (WARN_ON(base == NULL))
+		return;
+
+	value = readl(base + TEGRA186_GPIO_ENABLE_CONFIG);
+	value |= TEGRA186_GPIO_ENABLE_CONFIG_INTERRUPT;
+	writel(value, base + TEGRA186_GPIO_ENABLE_CONFIG);
+}
+
+static int tegra186_irq_set_type(struct irq_data *data, unsigned int type)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(data);
+	struct tegra_gpio *gpio = to_tegra_gpio(gc);
+	void __iomem *base;
+	u32 value;
+
+	base = tegra186_gpio_get_base(gpio, data->hwirq);
+	if (WARN_ON(base == NULL))
+		return -ENODEV;
+
+	value = readl(base + TEGRA186_GPIO_ENABLE_CONFIG);
+	value &= ~TEGRA186_GPIO_ENABLE_CONFIG_TRIGGER_TYPE_MASK;
+	value &= ~TEGRA186_GPIO_ENABLE_CONFIG_TRIGGER_LEVEL;
+
+	switch (type & IRQ_TYPE_SENSE_MASK) {
+	case IRQ_TYPE_NONE:
+		break;
+
+	case IRQ_TYPE_EDGE_RISING:
+		value |= TEGRA186_GPIO_ENABLE_CONFIG_TRIGGER_TYPE_SINGLE_EDGE;
+		value |= TEGRA186_GPIO_ENABLE_CONFIG_TRIGGER_LEVEL;
+		break;
+
+	case IRQ_TYPE_EDGE_FALLING:
+		value |= TEGRA186_GPIO_ENABLE_CONFIG_TRIGGER_TYPE_SINGLE_EDGE;
+		break;
+
+	case IRQ_TYPE_EDGE_BOTH:
+		value |= TEGRA186_GPIO_ENABLE_CONFIG_TRIGGER_TYPE_DOUBLE_EDGE;
+		break;
+
+	case IRQ_TYPE_LEVEL_HIGH:
+		value |= TEGRA186_GPIO_ENABLE_CONFIG_TRIGGER_TYPE_LEVEL;
+		value |= TEGRA186_GPIO_ENABLE_CONFIG_TRIGGER_LEVEL;
+		break;
+
+	case IRQ_TYPE_LEVEL_LOW:
+		value |= TEGRA186_GPIO_ENABLE_CONFIG_TRIGGER_TYPE_LEVEL;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	writel(value, base + TEGRA186_GPIO_ENABLE_CONFIG);
+
+	if ((type & IRQ_TYPE_EDGE_BOTH) == 0)
+		irq_set_handler_locked(data, handle_level_irq);
+	else
+		irq_set_handler_locked(data, handle_edge_irq);
+
+	if (data->parent_data)
+		return irq_chip_set_type_parent(data, type);
+
+	return 0;
+}
+
+static int tegra186_irq_set_wake(struct irq_data *data, unsigned int on)
+{
+	if (data->parent_data)
+		return irq_chip_set_wake_parent(data, on);
+
+	return 0;
+}
+
+static void tegra186_gpio_irq(struct irq_desc *desc)
+{
+	struct tegra_gpio *gpio = irq_desc_get_handler_data(desc);
+	struct irq_domain *domain = gpio->gpio.irq.domain;
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+	unsigned int parent = irq_desc_get_irq(desc);
+	unsigned int i, offset = 0;
+
+	chained_irq_enter(chip, desc);
+
+	for (i = 0; i < gpio->soc->num_ports; i++) {
+		const struct tegra_gpio_port *port = &gpio->soc->ports[i];
+		unsigned int pin, irq;
+		unsigned long value;
+		void __iomem *base;
+
+		base = gpio->base + port->bank * 0x1000 + port->port * 0x200;
+
+		/* skip ports that are not associated with this bank */
+		if (parent != gpio->irq[port->bank])
+			goto skip;
+
+		value = readl(base + TEGRA186_GPIO_INTERRUPT_STATUS(1));
+
+		for_each_set_bit(pin, &value, port->pins) {
+			irq = irq_find_mapping(domain, offset + pin);
+			if (WARN_ON(irq == 0))
+				continue;
+
+			generic_handle_irq(irq);
+		}
+
+skip:
+		offset += port->pins;
+	}
+
+	chained_irq_exit(chip, desc);
+}
+
+static int tegra186_gpio_irq_domain_translate(struct irq_domain *domain,
+					      struct irq_fwspec *fwspec,
+					      unsigned long *hwirq,
+					      unsigned int *type)
+{
+	struct tegra_gpio *gpio = gpiochip_get_data(domain->host_data);
+	unsigned int port, pin, i, offset = 0;
+
+	if (WARN_ON(gpio->gpio.of_gpio_n_cells < 2))
+		return -EINVAL;
+
+	if (WARN_ON(fwspec->param_count < gpio->gpio.of_gpio_n_cells))
+		return -EINVAL;
+
+	port = fwspec->param[0] / 8;
+	pin = fwspec->param[0] % 8;
+
+	if (port >= gpio->soc->num_ports)
+		return -EINVAL;
+
+	for (i = 0; i < port; i++)
+		offset += gpio->soc->ports[i].pins;
+
+	*type = fwspec->param[1] & IRQ_TYPE_SENSE_MASK;
+	*hwirq = offset + pin;
+
+	return 0;
+}
+
+static void *tegra186_gpio_populate_parent_fwspec(struct gpio_chip *chip,
+						 unsigned int parent_hwirq,
+						 unsigned int parent_type)
+{
+	struct tegra_gpio *gpio = gpiochip_get_data(chip);
+	struct irq_fwspec *fwspec;
+
+	fwspec = kmalloc(sizeof(*fwspec), GFP_KERNEL);
+	if (!fwspec)
+		return NULL;
+
+	fwspec->fwnode = chip->irq.parent_domain->fwnode;
+	fwspec->param_count = 3;
+	fwspec->param[0] = gpio->soc->instance;
+	fwspec->param[1] = parent_hwirq;
+	fwspec->param[2] = parent_type;
+
+	return fwspec;
+}
+
+static int tegra186_gpio_child_to_parent_hwirq(struct gpio_chip *chip,
+					       unsigned int hwirq,
+					       unsigned int type,
+					       unsigned int *parent_hwirq,
+					       unsigned int *parent_type)
+{
+	*parent_hwirq = chip->irq.child_offset_to_irq(chip, hwirq);
+	*parent_type = type;
+
+	return 0;
+}
+
+static unsigned int tegra186_gpio_child_offset_to_irq(struct gpio_chip *chip,
+						      unsigned int offset)
+{
+	struct tegra_gpio *gpio = gpiochip_get_data(chip);
+	unsigned int i;
+
+	for (i = 0; i < gpio->soc->num_ports; i++) {
+		if (offset < gpio->soc->ports[i].pins)
+			break;
+
+		offset -= gpio->soc->ports[i].pins;
+	}
+
+	return offset + i * 8;
+}
+
+static const struct of_device_id tegra186_pmc_of_match[] = {
+	{ .compatible = "nvidia,tegra186-pmc" },
+	{ .compatible = "nvidia,tegra194-pmc" },
+	{ /* sentinel */ }
+};
+
+static void tegra186_gpio_init_route_mapping(struct tegra_gpio *gpio)
+{
+	unsigned int i, j;
+	u32 value;
+
+	for (i = 0; i < gpio->soc->num_ports; i++) {
+		const struct tegra_gpio_port *port = &gpio->soc->ports[i];
+		unsigned int offset, p = port->port;
+		void __iomem *base;
+
+		base = gpio->secure + port->bank * 0x1000 + 0x800;
+
+		value = readl(base + TEGRA186_GPIO_CTL_SCR);
+
+		/*
+		 * For controllers that haven't been locked down yet, make
+		 * sure to program the default interrupt route mapping.
+		 */
+		if ((value & TEGRA186_GPIO_CTL_SCR_SEC_REN) == 0 &&
+		    (value & TEGRA186_GPIO_CTL_SCR_SEC_WEN) == 0) {
+			for (j = 0; j < 8; j++) {
+				offset = TEGRA186_GPIO_INT_ROUTE_MAPPING(p, j);
+
+				value = readl(base + offset);
+				value = BIT(port->pins) - 1;
+				writel(value, base + offset);
+			}
+		}
+	}
+}
+
+static int tegra186_gpio_probe(struct platform_device *pdev)
+{
+	unsigned int i, j, offset;
+	struct gpio_irq_chip *irq;
+	struct tegra_gpio *gpio;
+	struct device_node *np;
+	char **names;
+	int err;
+
+	gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
+	if (!gpio)
+		return -ENOMEM;
+
+	gpio->soc = of_device_get_match_data(&pdev->dev);
+
+	gpio->secure = devm_platform_ioremap_resource_byname(pdev, "security");
+	if (IS_ERR(gpio->secure))
+		return PTR_ERR(gpio->secure);
+
+	gpio->base = devm_platform_ioremap_resource_byname(pdev, "gpio");
+	if (IS_ERR(gpio->base))
+		return PTR_ERR(gpio->base);
+
+	err = platform_irq_count(pdev);
+	if (err < 0)
+		return err;
+
+	gpio->num_irq = err;
+
+	gpio->irq = devm_kcalloc(&pdev->dev, gpio->num_irq, sizeof(*gpio->irq),
+				 GFP_KERNEL);
+	if (!gpio->irq)
+		return -ENOMEM;
+
+	for (i = 0; i < gpio->num_irq; i++) {
+		err = platform_get_irq(pdev, i);
+		if (err < 0)
+			return err;
+
+		gpio->irq[i] = err;
+	}
+
+	gpio->gpio.label = gpio->soc->name;
+	gpio->gpio.parent = &pdev->dev;
+
+	gpio->gpio.request = gpiochip_generic_request;
+	gpio->gpio.free = gpiochip_generic_free;
+	gpio->gpio.get_direction = tegra186_gpio_get_direction;
+	gpio->gpio.direction_input = tegra186_gpio_direction_input;
+	gpio->gpio.direction_output = tegra186_gpio_direction_output;
+	gpio->gpio.get = tegra186_gpio_get,
+	gpio->gpio.set = tegra186_gpio_set;
+	gpio->gpio.set_config = tegra186_gpio_set_config;
+	gpio->gpio.add_pin_ranges = tegra186_gpio_add_pin_ranges;
+
+	gpio->gpio.base = -1;
+
+	for (i = 0; i < gpio->soc->num_ports; i++)
+		gpio->gpio.ngpio += gpio->soc->ports[i].pins;
+
+	names = devm_kcalloc(gpio->gpio.parent, gpio->gpio.ngpio,
+			     sizeof(*names), GFP_KERNEL);
+	if (!names)
+		return -ENOMEM;
+
+	for (i = 0, offset = 0; i < gpio->soc->num_ports; i++) {
+		const struct tegra_gpio_port *port = &gpio->soc->ports[i];
+		char *name;
+
+		for (j = 0; j < port->pins; j++) {
+			name = devm_kasprintf(gpio->gpio.parent, GFP_KERNEL,
+					      "P%s.%02x", port->name, j);
+			if (!name)
+				return -ENOMEM;
+
+			names[offset + j] = name;
+		}
+
+		offset += port->pins;
+	}
+
+	gpio->gpio.names = (const char * const *)names;
+
+	gpio->gpio.of_node = pdev->dev.of_node;
+	gpio->gpio.of_gpio_n_cells = 2;
+	gpio->gpio.of_xlate = tegra186_gpio_of_xlate;
+
+	gpio->intc.name = pdev->dev.of_node->name;
+	gpio->intc.irq_ack = tegra186_irq_ack;
+	gpio->intc.irq_mask = tegra186_irq_mask;
+	gpio->intc.irq_unmask = tegra186_irq_unmask;
+	gpio->intc.irq_set_type = tegra186_irq_set_type;
+	gpio->intc.irq_set_wake = tegra186_irq_set_wake;
+
+	irq = &gpio->gpio.irq;
+	irq->chip = &gpio->intc;
+	irq->fwnode = of_node_to_fwnode(pdev->dev.of_node);
+	irq->child_to_parent_hwirq = tegra186_gpio_child_to_parent_hwirq;
+	irq->populate_parent_alloc_arg = tegra186_gpio_populate_parent_fwspec;
+	irq->child_offset_to_irq = tegra186_gpio_child_offset_to_irq;
+	irq->child_irq_domain_ops.translate = tegra186_gpio_irq_domain_translate;
+	irq->handler = handle_simple_irq;
+	irq->default_type = IRQ_TYPE_NONE;
+	irq->parent_handler = tegra186_gpio_irq;
+	irq->parent_handler_data = gpio;
+	irq->num_parents = gpio->num_irq;
+	irq->parents = gpio->irq;
+
+	np = of_find_matching_node(NULL, tegra186_pmc_of_match);
+	if (np) {
+		irq->parent_domain = irq_find_host(np);
+		of_node_put(np);
+
+		if (!irq->parent_domain)
+			return -EPROBE_DEFER;
+	}
+
+	tegra186_gpio_init_route_mapping(gpio);
+
+	irq->map = devm_kcalloc(&pdev->dev, gpio->gpio.ngpio,
+				sizeof(*irq->map), GFP_KERNEL);
+	if (!irq->map)
+		return -ENOMEM;
+
+	for (i = 0, offset = 0; i < gpio->soc->num_ports; i++) {
+		const struct tegra_gpio_port *port = &gpio->soc->ports[i];
+
+		for (j = 0; j < port->pins; j++)
+			irq->map[offset + j] = irq->parents[port->bank];
+
+		offset += port->pins;
+	}
+
+	platform_set_drvdata(pdev, gpio);
+
+	err = devm_gpiochip_add_data(&pdev->dev, &gpio->gpio, gpio);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
+static int tegra186_gpio_remove(struct platform_device *pdev)
+{
+	return 0;
+}
+
+#define TEGRA186_MAIN_GPIO_PORT(_name, _bank, _port, _pins)	\
+	[TEGRA186_MAIN_GPIO_PORT_##_name] = {			\
+		.name = #_name,					\
+		.bank = _bank,					\
+		.port = _port,					\
+		.pins = _pins,					\
+	}
+
+static const struct tegra_gpio_port tegra186_main_ports[] = {
+	TEGRA186_MAIN_GPIO_PORT( A, 2, 0, 7),
+	TEGRA186_MAIN_GPIO_PORT( B, 3, 0, 7),
+	TEGRA186_MAIN_GPIO_PORT( C, 3, 1, 7),
+	TEGRA186_MAIN_GPIO_PORT( D, 3, 2, 6),
+	TEGRA186_MAIN_GPIO_PORT( E, 2, 1, 8),
+	TEGRA186_MAIN_GPIO_PORT( F, 2, 2, 6),
+	TEGRA186_MAIN_GPIO_PORT( G, 4, 1, 6),
+	TEGRA186_MAIN_GPIO_PORT( H, 1, 0, 7),
+	TEGRA186_MAIN_GPIO_PORT( I, 0, 4, 8),
+	TEGRA186_MAIN_GPIO_PORT( J, 5, 0, 8),
+	TEGRA186_MAIN_GPIO_PORT( K, 5, 1, 1),
+	TEGRA186_MAIN_GPIO_PORT( L, 1, 1, 8),
+	TEGRA186_MAIN_GPIO_PORT( M, 5, 3, 6),
+	TEGRA186_MAIN_GPIO_PORT( N, 0, 0, 7),
+	TEGRA186_MAIN_GPIO_PORT( O, 0, 1, 4),
+	TEGRA186_MAIN_GPIO_PORT( P, 4, 0, 7),
+	TEGRA186_MAIN_GPIO_PORT( Q, 0, 2, 6),
+	TEGRA186_MAIN_GPIO_PORT( R, 0, 5, 6),
+	TEGRA186_MAIN_GPIO_PORT( T, 0, 3, 4),
+	TEGRA186_MAIN_GPIO_PORT( X, 1, 2, 8),
+	TEGRA186_MAIN_GPIO_PORT( Y, 1, 3, 7),
+	TEGRA186_MAIN_GPIO_PORT(BB, 2, 3, 2),
+	TEGRA186_MAIN_GPIO_PORT(CC, 5, 2, 4),
+};
+
+static const struct tegra_gpio_soc tegra186_main_soc = {
+	.num_ports = ARRAY_SIZE(tegra186_main_ports),
+	.ports = tegra186_main_ports,
+	.name = "tegra186-gpio",
+	.instance = 0,
+};
+
+#define TEGRA186_AON_GPIO_PORT(_name, _bank, _port, _pins)	\
+	[TEGRA186_AON_GPIO_PORT_##_name] = {			\
+		.name = #_name,					\
+		.bank = _bank,					\
+		.port = _port,					\
+		.pins = _pins,					\
+	}
+
+static const struct tegra_gpio_port tegra186_aon_ports[] = {
+	TEGRA186_AON_GPIO_PORT( S, 0, 1, 5),
+	TEGRA186_AON_GPIO_PORT( U, 0, 2, 6),
+	TEGRA186_AON_GPIO_PORT( V, 0, 4, 8),
+	TEGRA186_AON_GPIO_PORT( W, 0, 5, 8),
+	TEGRA186_AON_GPIO_PORT( Z, 0, 7, 4),
+	TEGRA186_AON_GPIO_PORT(AA, 0, 6, 8),
+	TEGRA186_AON_GPIO_PORT(EE, 0, 3, 3),
+	TEGRA186_AON_GPIO_PORT(FF, 0, 0, 5),
+};
+
+static const struct tegra_gpio_soc tegra186_aon_soc = {
+	.num_ports = ARRAY_SIZE(tegra186_aon_ports),
+	.ports = tegra186_aon_ports,
+	.name = "tegra186-gpio-aon",
+	.instance = 1,
+};
+
+#define TEGRA194_MAIN_GPIO_PORT(_name, _bank, _port, _pins)	\
+	[TEGRA194_MAIN_GPIO_PORT_##_name] = {			\
+		.name = #_name,					\
+		.bank = _bank,					\
+		.port = _port,					\
+		.pins = _pins,					\
+	}
+
+static const struct tegra_gpio_port tegra194_main_ports[] = {
+	TEGRA194_MAIN_GPIO_PORT( A, 1, 2, 8),
+	TEGRA194_MAIN_GPIO_PORT( B, 4, 7, 2),
+	TEGRA194_MAIN_GPIO_PORT( C, 4, 3, 8),
+	TEGRA194_MAIN_GPIO_PORT( D, 4, 4, 4),
+	TEGRA194_MAIN_GPIO_PORT( E, 4, 5, 8),
+	TEGRA194_MAIN_GPIO_PORT( F, 4, 6, 6),
+	TEGRA194_MAIN_GPIO_PORT( G, 4, 0, 8),
+	TEGRA194_MAIN_GPIO_PORT( H, 4, 1, 8),
+	TEGRA194_MAIN_GPIO_PORT( I, 4, 2, 5),
+	TEGRA194_MAIN_GPIO_PORT( J, 5, 1, 6),
+	TEGRA194_MAIN_GPIO_PORT( K, 3, 0, 8),
+	TEGRA194_MAIN_GPIO_PORT( L, 3, 1, 4),
+	TEGRA194_MAIN_GPIO_PORT( M, 2, 3, 8),
+	TEGRA194_MAIN_GPIO_PORT( N, 2, 4, 3),
+	TEGRA194_MAIN_GPIO_PORT( O, 5, 0, 6),
+	TEGRA194_MAIN_GPIO_PORT( P, 2, 5, 8),
+	TEGRA194_MAIN_GPIO_PORT( Q, 2, 6, 8),
+	TEGRA194_MAIN_GPIO_PORT( R, 2, 7, 6),
+	TEGRA194_MAIN_GPIO_PORT( S, 3, 3, 8),
+	TEGRA194_MAIN_GPIO_PORT( T, 3, 4, 8),
+	TEGRA194_MAIN_GPIO_PORT( U, 3, 5, 1),
+	TEGRA194_MAIN_GPIO_PORT( V, 1, 0, 8),
+	TEGRA194_MAIN_GPIO_PORT( W, 1, 1, 2),
+	TEGRA194_MAIN_GPIO_PORT( X, 2, 0, 8),
+	TEGRA194_MAIN_GPIO_PORT( Y, 2, 1, 8),
+	TEGRA194_MAIN_GPIO_PORT( Z, 2, 2, 8),
+	TEGRA194_MAIN_GPIO_PORT(FF, 3, 2, 2),
+	TEGRA194_MAIN_GPIO_PORT(GG, 0, 0, 2)
+};
+
+static const struct tegra186_pin_range tegra194_main_pin_ranges[] = {
+	{ TEGRA194_MAIN_GPIO(GG, 0), "pex_l5_clkreq_n_pgg0" },
+	{ TEGRA194_MAIN_GPIO(GG, 1), "pex_l5_rst_n_pgg1" },
+};
+
+static const struct tegra_gpio_soc tegra194_main_soc = {
+	.num_ports = ARRAY_SIZE(tegra194_main_ports),
+	.ports = tegra194_main_ports,
+	.name = "tegra194-gpio",
+	.instance = 0,
+	.num_pin_ranges = ARRAY_SIZE(tegra194_main_pin_ranges),
+	.pin_ranges = tegra194_main_pin_ranges,
+	.pinmux = "nvidia,tegra194-pinmux",
+};
+
+#define TEGRA194_AON_GPIO_PORT(_name, _bank, _port, _pins)	\
+	[TEGRA194_AON_GPIO_PORT_##_name] = {			\
+		.name = #_name,					\
+		.bank = _bank,					\
+		.port = _port,					\
+		.pins = _pins,					\
+	}
+
+static const struct tegra_gpio_port tegra194_aon_ports[] = {
+	TEGRA194_AON_GPIO_PORT(AA, 0, 3, 8),
+	TEGRA194_AON_GPIO_PORT(BB, 0, 4, 4),
+	TEGRA194_AON_GPIO_PORT(CC, 0, 1, 8),
+	TEGRA194_AON_GPIO_PORT(DD, 0, 2, 3),
+	TEGRA194_AON_GPIO_PORT(EE, 0, 0, 7)
+};
+
+static const struct tegra_gpio_soc tegra194_aon_soc = {
+	.num_ports = ARRAY_SIZE(tegra194_aon_ports),
+	.ports = tegra194_aon_ports,
+	.name = "tegra194-gpio-aon",
+	.instance = 1,
+};
+
+static const struct of_device_id tegra186_gpio_of_match[] = {
+	{
+		.compatible = "nvidia,tegra186-gpio",
+		.data = &tegra186_main_soc
+	}, {
+		.compatible = "nvidia,tegra186-gpio-aon",
+		.data = &tegra186_aon_soc
+	}, {
+		.compatible = "nvidia,tegra194-gpio",
+		.data = &tegra194_main_soc
+	}, {
+		.compatible = "nvidia,tegra194-gpio-aon",
+		.data = &tegra194_aon_soc
+	}, {
+		/* sentinel */
+	}
+};
+MODULE_DEVICE_TABLE(of, tegra186_gpio_of_match);
+
+static struct platform_driver tegra186_gpio_driver = {
+	.driver = {
+		.name = "tegra186-gpio",
+		.of_match_table = tegra186_gpio_of_match,
+	},
+	.probe = tegra186_gpio_probe,
+	.remove = tegra186_gpio_remove,
+};
+module_platform_driver(tegra186_gpio_driver);
+
+MODULE_DESCRIPTION("NVIDIA Tegra186 GPIO controller driver");
+MODULE_AUTHOR("Thierry Reding <treding@nvidia.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-thunderx.c b/drivers/gpio/gpio-thunderx.c
new file mode 100644
index 000000000..9f66deab4
--- /dev/null
+++ b/drivers/gpio/gpio-thunderx.c
@@ -0,0 +1,601 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2016, 2017 Cavium Inc.
+ */
+
+#include <linux/bitops.h>
+#include <linux/gpio/driver.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+#include <asm-generic/msi.h>
+
+
+#define GPIO_RX_DAT	0x0
+#define GPIO_TX_SET	0x8
+#define GPIO_TX_CLR	0x10
+#define GPIO_CONST	0x90
+#define  GPIO_CONST_GPIOS_MASK 0xff
+#define GPIO_BIT_CFG	0x400
+#define  GPIO_BIT_CFG_TX_OE		BIT(0)
+#define  GPIO_BIT_CFG_PIN_XOR		BIT(1)
+#define  GPIO_BIT_CFG_INT_EN		BIT(2)
+#define  GPIO_BIT_CFG_INT_TYPE		BIT(3)
+#define  GPIO_BIT_CFG_FIL_MASK		GENMASK(11, 4)
+#define  GPIO_BIT_CFG_FIL_CNT_SHIFT	4
+#define  GPIO_BIT_CFG_FIL_SEL_SHIFT	8
+#define  GPIO_BIT_CFG_TX_OD		BIT(12)
+#define  GPIO_BIT_CFG_PIN_SEL_MASK	GENMASK(25, 16)
+#define GPIO_INTR	0x800
+#define  GPIO_INTR_INTR			BIT(0)
+#define  GPIO_INTR_INTR_W1S		BIT(1)
+#define  GPIO_INTR_ENA_W1C		BIT(2)
+#define  GPIO_INTR_ENA_W1S		BIT(3)
+#define GPIO_2ND_BANK	0x1400
+
+#define GLITCH_FILTER_400NS ((4u << GPIO_BIT_CFG_FIL_SEL_SHIFT) | \
+			     (9u << GPIO_BIT_CFG_FIL_CNT_SHIFT))
+
+struct thunderx_gpio;
+
+struct thunderx_line {
+	struct thunderx_gpio	*txgpio;
+	unsigned int		line;
+	unsigned int		fil_bits;
+};
+
+struct thunderx_gpio {
+	struct gpio_chip	chip;
+	u8 __iomem		*register_base;
+	struct msix_entry	*msix_entries;	/* per line MSI-X */
+	struct thunderx_line	*line_entries;	/* per line irq info */
+	raw_spinlock_t		lock;
+	unsigned long		invert_mask[2];
+	unsigned long		od_mask[2];
+	int			base_msi;
+};
+
+static unsigned int bit_cfg_reg(unsigned int line)
+{
+	return 8 * line + GPIO_BIT_CFG;
+}
+
+static unsigned int intr_reg(unsigned int line)
+{
+	return 8 * line + GPIO_INTR;
+}
+
+static bool thunderx_gpio_is_gpio_nowarn(struct thunderx_gpio *txgpio,
+					 unsigned int line)
+{
+	u64 bit_cfg = readq(txgpio->register_base + bit_cfg_reg(line));
+
+	return (bit_cfg & GPIO_BIT_CFG_PIN_SEL_MASK) == 0;
+}
+
+/*
+ * Check (and WARN) that the pin is available for GPIO.  We will not
+ * allow modification of the state of non-GPIO pins from this driver.
+ */
+static bool thunderx_gpio_is_gpio(struct thunderx_gpio *txgpio,
+				  unsigned int line)
+{
+	bool rv = thunderx_gpio_is_gpio_nowarn(txgpio, line);
+
+	WARN_RATELIMIT(!rv, "Pin %d not available for GPIO\n", line);
+
+	return rv;
+}
+
+static int thunderx_gpio_request(struct gpio_chip *chip, unsigned int line)
+{
+	struct thunderx_gpio *txgpio = gpiochip_get_data(chip);
+
+	return thunderx_gpio_is_gpio(txgpio, line) ? 0 : -EIO;
+}
+
+static int thunderx_gpio_dir_in(struct gpio_chip *chip, unsigned int line)
+{
+	struct thunderx_gpio *txgpio = gpiochip_get_data(chip);
+
+	if (!thunderx_gpio_is_gpio(txgpio, line))
+		return -EIO;
+
+	raw_spin_lock(&txgpio->lock);
+	clear_bit(line, txgpio->invert_mask);
+	clear_bit(line, txgpio->od_mask);
+	writeq(txgpio->line_entries[line].fil_bits,
+	       txgpio->register_base + bit_cfg_reg(line));
+	raw_spin_unlock(&txgpio->lock);
+	return 0;
+}
+
+static void thunderx_gpio_set(struct gpio_chip *chip, unsigned int line,
+			      int value)
+{
+	struct thunderx_gpio *txgpio = gpiochip_get_data(chip);
+	int bank = line / 64;
+	int bank_bit = line % 64;
+
+	void __iomem *reg = txgpio->register_base +
+		(bank * GPIO_2ND_BANK) + (value ? GPIO_TX_SET : GPIO_TX_CLR);
+
+	writeq(BIT_ULL(bank_bit), reg);
+}
+
+static int thunderx_gpio_dir_out(struct gpio_chip *chip, unsigned int line,
+				 int value)
+{
+	struct thunderx_gpio *txgpio = gpiochip_get_data(chip);
+	u64 bit_cfg = txgpio->line_entries[line].fil_bits | GPIO_BIT_CFG_TX_OE;
+
+	if (!thunderx_gpio_is_gpio(txgpio, line))
+		return -EIO;
+
+	raw_spin_lock(&txgpio->lock);
+
+	thunderx_gpio_set(chip, line, value);
+
+	if (test_bit(line, txgpio->invert_mask))
+		bit_cfg |= GPIO_BIT_CFG_PIN_XOR;
+
+	if (test_bit(line, txgpio->od_mask))
+		bit_cfg |= GPIO_BIT_CFG_TX_OD;
+
+	writeq(bit_cfg, txgpio->register_base + bit_cfg_reg(line));
+
+	raw_spin_unlock(&txgpio->lock);
+	return 0;
+}
+
+static int thunderx_gpio_get_direction(struct gpio_chip *chip, unsigned int line)
+{
+	struct thunderx_gpio *txgpio = gpiochip_get_data(chip);
+	u64 bit_cfg;
+
+	if (!thunderx_gpio_is_gpio_nowarn(txgpio, line))
+		/*
+		 * Say it is input for now to avoid WARNing on
+		 * gpiochip_add_data().  We will WARN if someone
+		 * requests it or tries to use it.
+		 */
+		return 1;
+
+	bit_cfg = readq(txgpio->register_base + bit_cfg_reg(line));
+
+	if (bit_cfg & GPIO_BIT_CFG_TX_OE)
+		return GPIO_LINE_DIRECTION_OUT;
+
+	return GPIO_LINE_DIRECTION_IN;
+}
+
+static int thunderx_gpio_set_config(struct gpio_chip *chip,
+				    unsigned int line,
+				    unsigned long cfg)
+{
+	bool orig_invert, orig_od, orig_dat, new_invert, new_od;
+	u32 arg, sel;
+	u64 bit_cfg;
+	int bank = line / 64;
+	int bank_bit = line % 64;
+	int ret = -ENOTSUPP;
+	struct thunderx_gpio *txgpio = gpiochip_get_data(chip);
+	void __iomem *reg = txgpio->register_base + (bank * GPIO_2ND_BANK) + GPIO_TX_SET;
+
+	if (!thunderx_gpio_is_gpio(txgpio, line))
+		return -EIO;
+
+	raw_spin_lock(&txgpio->lock);
+	orig_invert = test_bit(line, txgpio->invert_mask);
+	new_invert  = orig_invert;
+	orig_od = test_bit(line, txgpio->od_mask);
+	new_od = orig_od;
+	orig_dat = ((readq(reg) >> bank_bit) & 1) ^ orig_invert;
+	bit_cfg = readq(txgpio->register_base + bit_cfg_reg(line));
+	switch (pinconf_to_config_param(cfg)) {
+	case PIN_CONFIG_DRIVE_OPEN_DRAIN:
+		/*
+		 * Weird, setting open-drain mode causes signal
+		 * inversion.  Note this so we can compensate in the
+		 * dir_out function.
+		 */
+		set_bit(line, txgpio->invert_mask);
+		new_invert  = true;
+		set_bit(line, txgpio->od_mask);
+		new_od = true;
+		ret = 0;
+		break;
+	case PIN_CONFIG_DRIVE_PUSH_PULL:
+		clear_bit(line, txgpio->invert_mask);
+		new_invert  = false;
+		clear_bit(line, txgpio->od_mask);
+		new_od  = false;
+		ret = 0;
+		break;
+	case PIN_CONFIG_INPUT_DEBOUNCE:
+		arg = pinconf_to_config_argument(cfg);
+		if (arg > 1228) { /* 15 * 2^15 * 2.5nS maximum */
+			ret = -EINVAL;
+			break;
+		}
+		arg *= 400; /* scale to 2.5nS clocks. */
+		sel = 0;
+		while (arg > 15) {
+			sel++;
+			arg++; /* always round up */
+			arg >>= 1;
+		}
+		txgpio->line_entries[line].fil_bits =
+			(sel << GPIO_BIT_CFG_FIL_SEL_SHIFT) |
+			(arg << GPIO_BIT_CFG_FIL_CNT_SHIFT);
+		bit_cfg &= ~GPIO_BIT_CFG_FIL_MASK;
+		bit_cfg |= txgpio->line_entries[line].fil_bits;
+		writeq(bit_cfg, txgpio->register_base + bit_cfg_reg(line));
+		ret = 0;
+		break;
+	default:
+		break;
+	}
+	raw_spin_unlock(&txgpio->lock);
+
+	/*
+	 * If currently output and OPEN_DRAIN changed, install the new
+	 * settings
+	 */
+	if ((new_invert != orig_invert || new_od != orig_od) &&
+	    (bit_cfg & GPIO_BIT_CFG_TX_OE))
+		ret = thunderx_gpio_dir_out(chip, line, orig_dat ^ new_invert);
+
+	return ret;
+}
+
+static int thunderx_gpio_get(struct gpio_chip *chip, unsigned int line)
+{
+	struct thunderx_gpio *txgpio = gpiochip_get_data(chip);
+	int bank = line / 64;
+	int bank_bit = line % 64;
+	u64 read_bits = readq(txgpio->register_base + (bank * GPIO_2ND_BANK) + GPIO_RX_DAT);
+	u64 masked_bits = read_bits & BIT_ULL(bank_bit);
+
+	if (test_bit(line, txgpio->invert_mask))
+		return masked_bits == 0;
+	else
+		return masked_bits != 0;
+}
+
+static void thunderx_gpio_set_multiple(struct gpio_chip *chip,
+				       unsigned long *mask,
+				       unsigned long *bits)
+{
+	int bank;
+	u64 set_bits, clear_bits;
+	struct thunderx_gpio *txgpio = gpiochip_get_data(chip);
+
+	for (bank = 0; bank <= chip->ngpio / 64; bank++) {
+		set_bits = bits[bank] & mask[bank];
+		clear_bits = ~bits[bank] & mask[bank];
+		writeq(set_bits, txgpio->register_base + (bank * GPIO_2ND_BANK) + GPIO_TX_SET);
+		writeq(clear_bits, txgpio->register_base + (bank * GPIO_2ND_BANK) + GPIO_TX_CLR);
+	}
+}
+
+static void thunderx_gpio_irq_ack(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct thunderx_gpio *txgpio = gpiochip_get_data(gc);
+
+	writeq(GPIO_INTR_INTR,
+	       txgpio->register_base + intr_reg(irqd_to_hwirq(d)));
+}
+
+static void thunderx_gpio_irq_mask(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct thunderx_gpio *txgpio = gpiochip_get_data(gc);
+
+	writeq(GPIO_INTR_ENA_W1C,
+	       txgpio->register_base + intr_reg(irqd_to_hwirq(d)));
+}
+
+static void thunderx_gpio_irq_mask_ack(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct thunderx_gpio *txgpio = gpiochip_get_data(gc);
+
+	writeq(GPIO_INTR_ENA_W1C | GPIO_INTR_INTR,
+	       txgpio->register_base + intr_reg(irqd_to_hwirq(d)));
+}
+
+static void thunderx_gpio_irq_unmask(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct thunderx_gpio *txgpio = gpiochip_get_data(gc);
+
+	writeq(GPIO_INTR_ENA_W1S,
+	       txgpio->register_base + intr_reg(irqd_to_hwirq(d)));
+}
+
+static int thunderx_gpio_irq_set_type(struct irq_data *d,
+				      unsigned int flow_type)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct thunderx_gpio *txgpio = gpiochip_get_data(gc);
+	struct thunderx_line *txline =
+		&txgpio->line_entries[irqd_to_hwirq(d)];
+	u64 bit_cfg;
+
+	irqd_set_trigger_type(d, flow_type);
+
+	bit_cfg = txline->fil_bits | GPIO_BIT_CFG_INT_EN;
+
+	if (flow_type & IRQ_TYPE_EDGE_BOTH) {
+		irq_set_handler_locked(d, handle_fasteoi_ack_irq);
+		bit_cfg |= GPIO_BIT_CFG_INT_TYPE;
+	} else {
+		irq_set_handler_locked(d, handle_fasteoi_mask_irq);
+	}
+
+	raw_spin_lock(&txgpio->lock);
+	if (flow_type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_LEVEL_LOW)) {
+		bit_cfg |= GPIO_BIT_CFG_PIN_XOR;
+		set_bit(txline->line, txgpio->invert_mask);
+	} else {
+		clear_bit(txline->line, txgpio->invert_mask);
+	}
+	clear_bit(txline->line, txgpio->od_mask);
+	writeq(bit_cfg, txgpio->register_base + bit_cfg_reg(txline->line));
+	raw_spin_unlock(&txgpio->lock);
+
+	return IRQ_SET_MASK_OK;
+}
+
+static void thunderx_gpio_irq_enable(struct irq_data *data)
+{
+	irq_chip_enable_parent(data);
+	thunderx_gpio_irq_unmask(data);
+}
+
+static void thunderx_gpio_irq_disable(struct irq_data *data)
+{
+	thunderx_gpio_irq_mask(data);
+	irq_chip_disable_parent(data);
+}
+
+/*
+ * Interrupts are chained from underlying MSI-X vectors.  We have
+ * these irq_chip functions to be able to handle level triggering
+ * semantics and other acknowledgment tasks associated with the GPIO
+ * mechanism.
+ */
+static struct irq_chip thunderx_gpio_irq_chip = {
+	.name			= "GPIO",
+	.irq_enable		= thunderx_gpio_irq_enable,
+	.irq_disable		= thunderx_gpio_irq_disable,
+	.irq_ack		= thunderx_gpio_irq_ack,
+	.irq_mask		= thunderx_gpio_irq_mask,
+	.irq_mask_ack		= thunderx_gpio_irq_mask_ack,
+	.irq_unmask		= thunderx_gpio_irq_unmask,
+	.irq_eoi		= irq_chip_eoi_parent,
+	.irq_set_affinity	= irq_chip_set_affinity_parent,
+	.irq_set_type		= thunderx_gpio_irq_set_type,
+
+	.flags			= IRQCHIP_SET_TYPE_MASKED
+};
+
+static int thunderx_gpio_child_to_parent_hwirq(struct gpio_chip *gc,
+					       unsigned int child,
+					       unsigned int child_type,
+					       unsigned int *parent,
+					       unsigned int *parent_type)
+{
+	struct thunderx_gpio *txgpio = gpiochip_get_data(gc);
+	struct irq_data *irqd;
+	unsigned int irq;
+
+	irq = txgpio->msix_entries[child].vector;
+	irqd = irq_domain_get_irq_data(gc->irq.parent_domain, irq);
+	if (!irqd)
+		return -EINVAL;
+	*parent = irqd_to_hwirq(irqd);
+	*parent_type = IRQ_TYPE_LEVEL_HIGH;
+	return 0;
+}
+
+static void *thunderx_gpio_populate_parent_alloc_info(struct gpio_chip *chip,
+						      unsigned int parent_hwirq,
+						      unsigned int parent_type)
+{
+	msi_alloc_info_t *info;
+
+	info = kmalloc(sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return NULL;
+
+	info->hwirq = parent_hwirq;
+	return info;
+}
+
+static int thunderx_gpio_probe(struct pci_dev *pdev,
+			       const struct pci_device_id *id)
+{
+	void __iomem * const *tbl;
+	struct device *dev = &pdev->dev;
+	struct thunderx_gpio *txgpio;
+	struct gpio_chip *chip;
+	struct gpio_irq_chip *girq;
+	int ngpio, i;
+	int err = 0;
+
+	txgpio = devm_kzalloc(dev, sizeof(*txgpio), GFP_KERNEL);
+	if (!txgpio)
+		return -ENOMEM;
+
+	raw_spin_lock_init(&txgpio->lock);
+	chip = &txgpio->chip;
+
+	pci_set_drvdata(pdev, txgpio);
+
+	err = pcim_enable_device(pdev);
+	if (err) {
+		dev_err(dev, "Failed to enable PCI device: err %d\n", err);
+		goto out;
+	}
+
+	err = pcim_iomap_regions(pdev, 1 << 0, KBUILD_MODNAME);
+	if (err) {
+		dev_err(dev, "Failed to iomap PCI device: err %d\n", err);
+		goto out;
+	}
+
+	tbl = pcim_iomap_table(pdev);
+	txgpio->register_base = tbl[0];
+	if (!txgpio->register_base) {
+		dev_err(dev, "Cannot map PCI resource\n");
+		err = -ENOMEM;
+		goto out;
+	}
+
+	if (pdev->subsystem_device == 0xa10a) {
+		/* CN88XX has no GPIO_CONST register*/
+		ngpio = 50;
+		txgpio->base_msi = 48;
+	} else {
+		u64 c = readq(txgpio->register_base + GPIO_CONST);
+
+		ngpio = c & GPIO_CONST_GPIOS_MASK;
+		txgpio->base_msi = (c >> 8) & 0xff;
+	}
+
+	txgpio->msix_entries = devm_kcalloc(dev,
+					    ngpio, sizeof(struct msix_entry),
+					    GFP_KERNEL);
+	if (!txgpio->msix_entries) {
+		err = -ENOMEM;
+		goto out;
+	}
+
+	txgpio->line_entries = devm_kcalloc(dev,
+					    ngpio,
+					    sizeof(struct thunderx_line),
+					    GFP_KERNEL);
+	if (!txgpio->line_entries) {
+		err = -ENOMEM;
+		goto out;
+	}
+
+	for (i = 0; i < ngpio; i++) {
+		u64 bit_cfg = readq(txgpio->register_base + bit_cfg_reg(i));
+
+		txgpio->msix_entries[i].entry = txgpio->base_msi + (2 * i);
+		txgpio->line_entries[i].line = i;
+		txgpio->line_entries[i].txgpio = txgpio;
+		/*
+		 * If something has already programmed the pin, use
+		 * the existing glitch filter settings, otherwise go
+		 * to 400nS.
+		 */
+		txgpio->line_entries[i].fil_bits = bit_cfg ?
+			(bit_cfg & GPIO_BIT_CFG_FIL_MASK) : GLITCH_FILTER_400NS;
+
+		if ((bit_cfg & GPIO_BIT_CFG_TX_OE) && (bit_cfg & GPIO_BIT_CFG_TX_OD))
+			set_bit(i, txgpio->od_mask);
+		if (bit_cfg & GPIO_BIT_CFG_PIN_XOR)
+			set_bit(i, txgpio->invert_mask);
+	}
+
+
+	/* Enable all MSI-X for interrupts on all possible lines. */
+	err = pci_enable_msix_range(pdev, txgpio->msix_entries, ngpio, ngpio);
+	if (err < 0)
+		goto out;
+
+	chip->label = KBUILD_MODNAME;
+	chip->parent = dev;
+	chip->owner = THIS_MODULE;
+	chip->request = thunderx_gpio_request;
+	chip->base = -1; /* System allocated */
+	chip->can_sleep = false;
+	chip->ngpio = ngpio;
+	chip->get_direction = thunderx_gpio_get_direction;
+	chip->direction_input = thunderx_gpio_dir_in;
+	chip->get = thunderx_gpio_get;
+	chip->direction_output = thunderx_gpio_dir_out;
+	chip->set = thunderx_gpio_set;
+	chip->set_multiple = thunderx_gpio_set_multiple;
+	chip->set_config = thunderx_gpio_set_config;
+	girq = &chip->irq;
+	girq->chip = &thunderx_gpio_irq_chip;
+	girq->fwnode = of_node_to_fwnode(dev->of_node);
+	girq->parent_domain =
+		irq_get_irq_data(txgpio->msix_entries[0].vector)->domain;
+	girq->child_to_parent_hwirq = thunderx_gpio_child_to_parent_hwirq;
+	girq->populate_parent_alloc_arg = thunderx_gpio_populate_parent_alloc_info;
+	girq->handler = handle_bad_irq;
+	girq->default_type = IRQ_TYPE_NONE;
+
+	err = devm_gpiochip_add_data(dev, chip, txgpio);
+	if (err)
+		goto out;
+
+	/* Push on irq_data and the domain for each line. */
+	for (i = 0; i < ngpio; i++) {
+		struct irq_fwspec fwspec;
+
+		fwspec.fwnode = of_node_to_fwnode(dev->of_node);
+		fwspec.param_count = 2;
+		fwspec.param[0] = i;
+		fwspec.param[1] = IRQ_TYPE_NONE;
+		err = irq_domain_push_irq(girq->domain,
+					  txgpio->msix_entries[i].vector,
+					  &fwspec);
+		if (err < 0)
+			dev_err(dev, "irq_domain_push_irq: %d\n", err);
+	}
+
+	dev_info(dev, "ThunderX GPIO: %d lines with base %d.\n",
+		 ngpio, chip->base);
+	return 0;
+out:
+	pci_set_drvdata(pdev, NULL);
+	return err;
+}
+
+static void thunderx_gpio_remove(struct pci_dev *pdev)
+{
+	int i;
+	struct thunderx_gpio *txgpio = pci_get_drvdata(pdev);
+
+	for (i = 0; i < txgpio->chip.ngpio; i++)
+		irq_domain_pop_irq(txgpio->chip.irq.domain,
+				   txgpio->msix_entries[i].vector);
+
+	irq_domain_remove(txgpio->chip.irq.domain);
+
+	pci_set_drvdata(pdev, NULL);
+}
+
+static const struct pci_device_id thunderx_gpio_id_table[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, 0xA00A) },
+	{ 0, }	/* end of table */
+};
+
+MODULE_DEVICE_TABLE(pci, thunderx_gpio_id_table);
+
+static struct pci_driver thunderx_gpio_driver = {
+	.name = KBUILD_MODNAME,
+	.id_table = thunderx_gpio_id_table,
+	.probe = thunderx_gpio_probe,
+	.remove = thunderx_gpio_remove,
+};
+
+module_pci_driver(thunderx_gpio_driver);
+
+MODULE_DESCRIPTION("Cavium Inc. ThunderX/OCTEON-TX GPIO Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/gpio-timberdale.c b/drivers/gpio/gpio-timberdale.c
new file mode 100644
index 000000000..92c1f2baa
--- /dev/null
+++ b/drivers/gpio/gpio-timberdale.c
@@ -0,0 +1,290 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Timberdale FPGA GPIO driver
+ * Author: Mocean Laboratories
+ * Copyright (c) 2009 Intel Corporation
+ */
+
+/* Supports:
+ * Timberdale FPGA GPIO
+ */
+
+#include <linux/init.h>
+#include <linux/gpio/driver.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/timb_gpio.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+
+#define DRIVER_NAME "timb-gpio"
+
+#define TGPIOVAL	0x00
+#define TGPIODIR	0x04
+#define TGPIO_IER	0x08
+#define TGPIO_ISR	0x0c
+#define TGPIO_IPR	0x10
+#define TGPIO_ICR	0x14
+#define TGPIO_FLR	0x18
+#define TGPIO_LVR	0x1c
+#define TGPIO_VER	0x20
+#define TGPIO_BFLR	0x24
+
+struct timbgpio {
+	void __iomem		*membase;
+	spinlock_t		lock; /* mutual exclusion */
+	struct gpio_chip	gpio;
+	int			irq_base;
+	unsigned long		last_ier;
+};
+
+static int timbgpio_update_bit(struct gpio_chip *gpio, unsigned index,
+	unsigned offset, bool enabled)
+{
+	struct timbgpio *tgpio = gpiochip_get_data(gpio);
+	unsigned long flags;
+	u32 reg;
+
+	spin_lock_irqsave(&tgpio->lock, flags);
+	reg = ioread32(tgpio->membase + offset);
+
+	if (enabled)
+		reg |= (1 << index);
+	else
+		reg &= ~(1 << index);
+
+	iowrite32(reg, tgpio->membase + offset);
+	spin_unlock_irqrestore(&tgpio->lock, flags);
+
+	return 0;
+}
+
+static int timbgpio_gpio_direction_input(struct gpio_chip *gpio, unsigned nr)
+{
+	return timbgpio_update_bit(gpio, nr, TGPIODIR, true);
+}
+
+static int timbgpio_gpio_get(struct gpio_chip *gpio, unsigned nr)
+{
+	struct timbgpio *tgpio = gpiochip_get_data(gpio);
+	u32 value;
+
+	value = ioread32(tgpio->membase + TGPIOVAL);
+	return (value & (1 << nr)) ? 1 : 0;
+}
+
+static int timbgpio_gpio_direction_output(struct gpio_chip *gpio,
+						unsigned nr, int val)
+{
+	return timbgpio_update_bit(gpio, nr, TGPIODIR, false);
+}
+
+static void timbgpio_gpio_set(struct gpio_chip *gpio,
+				unsigned nr, int val)
+{
+	timbgpio_update_bit(gpio, nr, TGPIOVAL, val != 0);
+}
+
+static int timbgpio_to_irq(struct gpio_chip *gpio, unsigned offset)
+{
+	struct timbgpio *tgpio = gpiochip_get_data(gpio);
+
+	if (tgpio->irq_base <= 0)
+		return -EINVAL;
+
+	return tgpio->irq_base + offset;
+}
+
+/*
+ * GPIO IRQ
+ */
+static void timbgpio_irq_disable(struct irq_data *d)
+{
+	struct timbgpio *tgpio = irq_data_get_irq_chip_data(d);
+	int offset = d->irq - tgpio->irq_base;
+	unsigned long flags;
+
+	spin_lock_irqsave(&tgpio->lock, flags);
+	tgpio->last_ier &= ~(1UL << offset);
+	iowrite32(tgpio->last_ier, tgpio->membase + TGPIO_IER);
+	spin_unlock_irqrestore(&tgpio->lock, flags);
+}
+
+static void timbgpio_irq_enable(struct irq_data *d)
+{
+	struct timbgpio *tgpio = irq_data_get_irq_chip_data(d);
+	int offset = d->irq - tgpio->irq_base;
+	unsigned long flags;
+
+	spin_lock_irqsave(&tgpio->lock, flags);
+	tgpio->last_ier |= 1UL << offset;
+	iowrite32(tgpio->last_ier, tgpio->membase + TGPIO_IER);
+	spin_unlock_irqrestore(&tgpio->lock, flags);
+}
+
+static int timbgpio_irq_type(struct irq_data *d, unsigned trigger)
+{
+	struct timbgpio *tgpio = irq_data_get_irq_chip_data(d);
+	int offset = d->irq - tgpio->irq_base;
+	unsigned long flags;
+	u32 lvr, flr, bflr = 0;
+	u32 ver;
+	int ret = 0;
+
+	if (offset < 0 || offset > tgpio->gpio.ngpio)
+		return -EINVAL;
+
+	ver = ioread32(tgpio->membase + TGPIO_VER);
+
+	spin_lock_irqsave(&tgpio->lock, flags);
+
+	lvr = ioread32(tgpio->membase + TGPIO_LVR);
+	flr = ioread32(tgpio->membase + TGPIO_FLR);
+	if (ver > 2)
+		bflr = ioread32(tgpio->membase + TGPIO_BFLR);
+
+	if (trigger & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) {
+		bflr &= ~(1 << offset);
+		flr &= ~(1 << offset);
+		if (trigger & IRQ_TYPE_LEVEL_HIGH)
+			lvr |= 1 << offset;
+		else
+			lvr &= ~(1 << offset);
+	}
+
+	if ((trigger & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH) {
+		if (ver < 3) {
+			ret = -EINVAL;
+			goto out;
+		} else {
+			flr |= 1 << offset;
+			bflr |= 1 << offset;
+		}
+	} else {
+		bflr &= ~(1 << offset);
+		flr |= 1 << offset;
+		if (trigger & IRQ_TYPE_EDGE_FALLING)
+			lvr &= ~(1 << offset);
+		else
+			lvr |= 1 << offset;
+	}
+
+	iowrite32(lvr, tgpio->membase + TGPIO_LVR);
+	iowrite32(flr, tgpio->membase + TGPIO_FLR);
+	if (ver > 2)
+		iowrite32(bflr, tgpio->membase + TGPIO_BFLR);
+
+	iowrite32(1 << offset, tgpio->membase + TGPIO_ICR);
+
+out:
+	spin_unlock_irqrestore(&tgpio->lock, flags);
+	return ret;
+}
+
+static void timbgpio_irq(struct irq_desc *desc)
+{
+	struct timbgpio *tgpio = irq_desc_get_handler_data(desc);
+	struct irq_data *data = irq_desc_get_irq_data(desc);
+	unsigned long ipr;
+	int offset;
+
+	data->chip->irq_ack(data);
+	ipr = ioread32(tgpio->membase + TGPIO_IPR);
+	iowrite32(ipr, tgpio->membase + TGPIO_ICR);
+
+	/*
+	 * Some versions of the hardware trash the IER register if more than
+	 * one interrupt is received simultaneously.
+	 */
+	iowrite32(0, tgpio->membase + TGPIO_IER);
+
+	for_each_set_bit(offset, &ipr, tgpio->gpio.ngpio)
+		generic_handle_irq(timbgpio_to_irq(&tgpio->gpio, offset));
+
+	iowrite32(tgpio->last_ier, tgpio->membase + TGPIO_IER);
+}
+
+static struct irq_chip timbgpio_irqchip = {
+	.name		= "GPIO",
+	.irq_enable	= timbgpio_irq_enable,
+	.irq_disable	= timbgpio_irq_disable,
+	.irq_set_type	= timbgpio_irq_type,
+};
+
+static int timbgpio_probe(struct platform_device *pdev)
+{
+	int err, i;
+	struct device *dev = &pdev->dev;
+	struct gpio_chip *gc;
+	struct timbgpio *tgpio;
+	struct timbgpio_platform_data *pdata = dev_get_platdata(&pdev->dev);
+	int irq = platform_get_irq(pdev, 0);
+
+	if (!pdata || pdata->nr_pins > 32) {
+		dev_err(dev, "Invalid platform data\n");
+		return -EINVAL;
+	}
+
+	tgpio = devm_kzalloc(dev, sizeof(*tgpio), GFP_KERNEL);
+	if (!tgpio)
+		return -EINVAL;
+
+	tgpio->irq_base = pdata->irq_base;
+
+	spin_lock_init(&tgpio->lock);
+
+	tgpio->membase = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(tgpio->membase))
+		return PTR_ERR(tgpio->membase);
+
+	gc = &tgpio->gpio;
+
+	gc->label = dev_name(&pdev->dev);
+	gc->owner = THIS_MODULE;
+	gc->parent = &pdev->dev;
+	gc->direction_input = timbgpio_gpio_direction_input;
+	gc->get = timbgpio_gpio_get;
+	gc->direction_output = timbgpio_gpio_direction_output;
+	gc->set = timbgpio_gpio_set;
+	gc->to_irq = (irq >= 0 && tgpio->irq_base > 0) ? timbgpio_to_irq : NULL;
+	gc->dbg_show = NULL;
+	gc->base = pdata->gpio_base;
+	gc->ngpio = pdata->nr_pins;
+	gc->can_sleep = false;
+
+	err = devm_gpiochip_add_data(&pdev->dev, gc, tgpio);
+	if (err)
+		return err;
+
+	platform_set_drvdata(pdev, tgpio);
+
+	/* make sure to disable interrupts */
+	iowrite32(0x0, tgpio->membase + TGPIO_IER);
+
+	if (irq < 0 || tgpio->irq_base <= 0)
+		return 0;
+
+	for (i = 0; i < pdata->nr_pins; i++) {
+		irq_set_chip_and_handler(tgpio->irq_base + i,
+			&timbgpio_irqchip, handle_simple_irq);
+		irq_set_chip_data(tgpio->irq_base + i, tgpio);
+		irq_clear_status_flags(tgpio->irq_base + i, IRQ_NOREQUEST | IRQ_NOPROBE);
+	}
+
+	irq_set_chained_handler_and_data(irq, timbgpio_irq, tgpio);
+
+	return 0;
+}
+
+static struct platform_driver timbgpio_platform_driver = {
+	.driver = {
+		.name			= DRIVER_NAME,
+		.suppress_bind_attrs	= true,
+	},
+	.probe		= timbgpio_probe,
+};
+
+/*--------------------------------------------------------------------------*/
+
+builtin_platform_driver(timbgpio_platform_driver);
diff --git a/drivers/gpio/gpio-tpic2810.c b/drivers/gpio/gpio-tpic2810.c
new file mode 100644
index 000000000..99d5a84a9
--- /dev/null
+++ b/drivers/gpio/gpio-tpic2810.c
@@ -0,0 +1,165 @@
+/*
+ * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/
+ *	Andrew F. Davis <afd@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether expressed or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License version 2 for more details.
+ */
+
+#include <linux/gpio/driver.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+
+#define TPIC2810_WS_COMMAND 0x44
+
+/**
+ * struct tpic2810 - GPIO driver data
+ * @chip: GPIO controller chip
+ * @client: I2C device pointer
+ * @buffer: Buffer for device register
+ * @lock: Protects write sequences
+ */
+struct tpic2810 {
+	struct gpio_chip chip;
+	struct i2c_client *client;
+	u8 buffer;
+	struct mutex lock;
+};
+
+static void tpic2810_set(struct gpio_chip *chip, unsigned offset, int value);
+
+static int tpic2810_get_direction(struct gpio_chip *chip,
+				  unsigned offset)
+{
+	/* This device always output */
+	return GPIO_LINE_DIRECTION_OUT;
+}
+
+static int tpic2810_direction_input(struct gpio_chip *chip,
+				    unsigned offset)
+{
+	/* This device is output only */
+	return -EINVAL;
+}
+
+static int tpic2810_direction_output(struct gpio_chip *chip,
+				     unsigned offset, int value)
+{
+	/* This device always output */
+	tpic2810_set(chip, offset, value);
+	return 0;
+}
+
+static void tpic2810_set_mask_bits(struct gpio_chip *chip, u8 mask, u8 bits)
+{
+	struct tpic2810 *gpio = gpiochip_get_data(chip);
+	u8 buffer;
+	int err;
+
+	mutex_lock(&gpio->lock);
+
+	buffer = gpio->buffer & ~mask;
+	buffer |= (mask & bits);
+
+	err = i2c_smbus_write_byte_data(gpio->client, TPIC2810_WS_COMMAND,
+					buffer);
+	if (!err)
+		gpio->buffer = buffer;
+
+	mutex_unlock(&gpio->lock);
+}
+
+static void tpic2810_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	tpic2810_set_mask_bits(chip, BIT(offset), value ? BIT(offset) : 0);
+}
+
+static void tpic2810_set_multiple(struct gpio_chip *chip, unsigned long *mask,
+				  unsigned long *bits)
+{
+	tpic2810_set_mask_bits(chip, *mask, *bits);
+}
+
+static const struct gpio_chip template_chip = {
+	.label			= "tpic2810",
+	.owner			= THIS_MODULE,
+	.get_direction		= tpic2810_get_direction,
+	.direction_input	= tpic2810_direction_input,
+	.direction_output	= tpic2810_direction_output,
+	.set			= tpic2810_set,
+	.set_multiple		= tpic2810_set_multiple,
+	.base			= -1,
+	.ngpio			= 8,
+	.can_sleep		= true,
+};
+
+static const struct of_device_id tpic2810_of_match_table[] = {
+	{ .compatible = "ti,tpic2810" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, tpic2810_of_match_table);
+
+static int tpic2810_probe(struct i2c_client *client,
+			  const struct i2c_device_id *id)
+{
+	struct tpic2810 *gpio;
+	int ret;
+
+	gpio = devm_kzalloc(&client->dev, sizeof(*gpio), GFP_KERNEL);
+	if (!gpio)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, gpio);
+
+	gpio->chip = template_chip;
+	gpio->chip.parent = &client->dev;
+
+	gpio->client = client;
+
+	mutex_init(&gpio->lock);
+
+	ret = gpiochip_add_data(&gpio->chip, gpio);
+	if (ret < 0) {
+		dev_err(&client->dev, "Unable to register gpiochip\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int tpic2810_remove(struct i2c_client *client)
+{
+	struct tpic2810 *gpio = i2c_get_clientdata(client);
+
+	gpiochip_remove(&gpio->chip);
+
+	return 0;
+}
+
+static const struct i2c_device_id tpic2810_id_table[] = {
+	{ "tpic2810", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(i2c, tpic2810_id_table);
+
+static struct i2c_driver tpic2810_driver = {
+	.driver = {
+		.name = "tpic2810",
+		.of_match_table = tpic2810_of_match_table,
+	},
+	.probe = tpic2810_probe,
+	.remove = tpic2810_remove,
+	.id_table = tpic2810_id_table,
+};
+module_i2c_driver(tpic2810_driver);
+
+MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>");
+MODULE_DESCRIPTION("TPIC2810 8-Bit LED Driver GPIO Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-tps65086.c b/drivers/gpio/gpio-tps65086.c
new file mode 100644
index 000000000..1e9d8262d
--- /dev/null
+++ b/drivers/gpio/gpio-tps65086.c
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/
+ *	Andrew F. Davis <afd@ti.com>
+ *
+ * Based on the TPS65912 driver
+ */
+
+#include <linux/gpio/driver.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <linux/mfd/tps65086.h>
+
+struct tps65086_gpio {
+	struct gpio_chip chip;
+	struct tps65086 *tps;
+};
+
+static int tps65086_gpio_get_direction(struct gpio_chip *chip,
+				       unsigned offset)
+{
+	/* This device is output only */
+	return GPIO_LINE_DIRECTION_OUT;
+}
+
+static int tps65086_gpio_direction_input(struct gpio_chip *chip,
+					 unsigned offset)
+{
+	/* This device is output only */
+	return -EINVAL;
+}
+
+static int tps65086_gpio_direction_output(struct gpio_chip *chip,
+					  unsigned offset, int value)
+{
+	struct tps65086_gpio *gpio = gpiochip_get_data(chip);
+
+	/* Set the initial value */
+	regmap_update_bits(gpio->tps->regmap, TPS65086_GPOCTRL,
+			   BIT(4 + offset), value ? BIT(4 + offset) : 0);
+
+	return 0;
+}
+
+static int tps65086_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct tps65086_gpio *gpio = gpiochip_get_data(chip);
+	int ret, val;
+
+	ret = regmap_read(gpio->tps->regmap, TPS65086_GPOCTRL, &val);
+	if (ret < 0)
+		return ret;
+
+	return val & BIT(4 + offset);
+}
+
+static void tps65086_gpio_set(struct gpio_chip *chip, unsigned offset,
+			      int value)
+{
+	struct tps65086_gpio *gpio = gpiochip_get_data(chip);
+
+	regmap_update_bits(gpio->tps->regmap, TPS65086_GPOCTRL,
+			   BIT(4 + offset), value ? BIT(4 + offset) : 0);
+}
+
+static const struct gpio_chip template_chip = {
+	.label			= "tps65086-gpio",
+	.owner			= THIS_MODULE,
+	.get_direction		= tps65086_gpio_get_direction,
+	.direction_input	= tps65086_gpio_direction_input,
+	.direction_output	= tps65086_gpio_direction_output,
+	.get			= tps65086_gpio_get,
+	.set			= tps65086_gpio_set,
+	.base			= -1,
+	.ngpio			= 4,
+	.can_sleep		= true,
+};
+
+static int tps65086_gpio_probe(struct platform_device *pdev)
+{
+	struct tps65086_gpio *gpio;
+	int ret;
+
+	gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
+	if (!gpio)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, gpio);
+
+	gpio->tps = dev_get_drvdata(pdev->dev.parent);
+	gpio->chip = template_chip;
+	gpio->chip.parent = gpio->tps->dev;
+
+	ret = gpiochip_add_data(&gpio->chip, gpio);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int tps65086_gpio_remove(struct platform_device *pdev)
+{
+	struct tps65086_gpio *gpio = platform_get_drvdata(pdev);
+
+	gpiochip_remove(&gpio->chip);
+
+	return 0;
+}
+
+static const struct platform_device_id tps65086_gpio_id_table[] = {
+	{ "tps65086-gpio", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(platform, tps65086_gpio_id_table);
+
+static struct platform_driver tps65086_gpio_driver = {
+	.driver = {
+		.name = "tps65086-gpio",
+	},
+	.probe = tps65086_gpio_probe,
+	.remove = tps65086_gpio_remove,
+	.id_table = tps65086_gpio_id_table,
+};
+module_platform_driver(tps65086_gpio_driver);
+
+MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>");
+MODULE_DESCRIPTION("TPS65086 GPIO driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-tps65218.c b/drivers/gpio/gpio-tps65218.c
new file mode 100644
index 000000000..43a115005
--- /dev/null
+++ b/drivers/gpio/gpio-tps65218.c
@@ -0,0 +1,242 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2015 Verifone Int.
+ *
+ * Author: Nicolas Saenz Julienne <nicolassaenzj@gmail.com>
+ *
+ * This driver is based on the gpio-tps65912 implementation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/gpio/driver.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/mfd/tps65218.h>
+
+struct tps65218_gpio {
+	struct tps65218 *tps65218;
+	struct gpio_chip gpio_chip;
+};
+
+static int tps65218_gpio_get(struct gpio_chip *gc, unsigned offset)
+{
+	struct tps65218_gpio *tps65218_gpio = gpiochip_get_data(gc);
+	struct tps65218 *tps65218 = tps65218_gpio->tps65218;
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(tps65218->regmap, TPS65218_REG_ENABLE2, &val);
+	if (ret)
+		return ret;
+
+	return !!(val & (TPS65218_ENABLE2_GPIO1 << offset));
+}
+
+static void tps65218_gpio_set(struct gpio_chip *gc, unsigned offset,
+			      int value)
+{
+	struct tps65218_gpio *tps65218_gpio = gpiochip_get_data(gc);
+	struct tps65218 *tps65218 = tps65218_gpio->tps65218;
+
+	if (value)
+		tps65218_set_bits(tps65218, TPS65218_REG_ENABLE2,
+				  TPS65218_ENABLE2_GPIO1 << offset,
+				  TPS65218_ENABLE2_GPIO1 << offset,
+				  TPS65218_PROTECT_L1);
+	else
+		tps65218_clear_bits(tps65218, TPS65218_REG_ENABLE2,
+				    TPS65218_ENABLE2_GPIO1 << offset,
+				    TPS65218_PROTECT_L1);
+}
+
+static int tps65218_gpio_output(struct gpio_chip *gc, unsigned offset,
+				int value)
+{
+	/* Only drives GPOs */
+	tps65218_gpio_set(gc, offset, value);
+	return 0;
+}
+
+static int tps65218_gpio_input(struct gpio_chip *gc, unsigned offset)
+{
+	return -EPERM;
+}
+
+static int tps65218_gpio_request(struct gpio_chip *gc, unsigned offset)
+{
+	struct tps65218_gpio *tps65218_gpio = gpiochip_get_data(gc);
+	struct tps65218 *tps65218 = tps65218_gpio->tps65218;
+	int ret;
+
+	if (gpiochip_line_is_open_source(gc, offset)) {
+		dev_err(gc->parent, "can't work as open source\n");
+		return -EINVAL;
+	}
+
+	switch (offset) {
+	case 0:
+		if (!gpiochip_line_is_open_drain(gc, offset)) {
+			dev_err(gc->parent, "GPO1 works only as open drain\n");
+			return -EINVAL;
+		}
+
+		/* Disable sequencer for GPO1 */
+		ret = tps65218_clear_bits(tps65218, TPS65218_REG_SEQ7,
+					  TPS65218_SEQ7_GPO1_SEQ_MASK,
+					  TPS65218_PROTECT_L1);
+		if (ret)
+			return ret;
+
+		/* Setup GPO1 */
+		ret = tps65218_clear_bits(tps65218, TPS65218_REG_CONFIG1,
+					  TPS65218_CONFIG1_IO1_SEL,
+					  TPS65218_PROTECT_L1);
+		if (ret)
+			return ret;
+
+		break;
+	case 1:
+		/* Setup GPO2 */
+		ret = tps65218_clear_bits(tps65218, TPS65218_REG_CONFIG1,
+					  TPS65218_CONFIG1_IO1_SEL,
+					  TPS65218_PROTECT_L1);
+		if (ret)
+			return ret;
+
+		break;
+
+	case 2:
+		if (!gpiochip_line_is_open_drain(gc, offset)) {
+			dev_err(gc->parent, "GPO3 works only as open drain\n");
+			return -EINVAL;
+		}
+
+		/* Disable sequencer for GPO3 */
+		ret = tps65218_clear_bits(tps65218, TPS65218_REG_SEQ7,
+					  TPS65218_SEQ7_GPO3_SEQ_MASK,
+					  TPS65218_PROTECT_L1);
+		if (ret)
+			return ret;
+
+		/* Setup GPO3 */
+		ret = tps65218_clear_bits(tps65218, TPS65218_REG_CONFIG2,
+					  TPS65218_CONFIG2_DC12_RST,
+					  TPS65218_PROTECT_L1);
+		if (ret)
+			return ret;
+
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int tps65218_gpio_set_config(struct gpio_chip *gc, unsigned offset,
+				    unsigned long config)
+{
+	struct tps65218_gpio *tps65218_gpio = gpiochip_get_data(gc);
+	struct tps65218 *tps65218 = tps65218_gpio->tps65218;
+	enum pin_config_param param = pinconf_to_config_param(config);
+
+	switch (offset) {
+	case 0:
+	case 2:
+		/* GPO1 is hardwired to be open drain */
+		if (param == PIN_CONFIG_DRIVE_OPEN_DRAIN)
+			return 0;
+		return -ENOTSUPP;
+	case 1:
+		/* GPO2 is push-pull by default, can be set as open drain. */
+		if (param == PIN_CONFIG_DRIVE_OPEN_DRAIN)
+			return tps65218_clear_bits(tps65218,
+						   TPS65218_REG_CONFIG1,
+						   TPS65218_CONFIG1_GPO2_BUF,
+						   TPS65218_PROTECT_L1);
+		if (param == PIN_CONFIG_DRIVE_PUSH_PULL)
+			return tps65218_set_bits(tps65218,
+						 TPS65218_REG_CONFIG1,
+						 TPS65218_CONFIG1_GPO2_BUF,
+						 TPS65218_CONFIG1_GPO2_BUF,
+						 TPS65218_PROTECT_L1);
+		return -ENOTSUPP;
+	default:
+		break;
+	}
+	return -ENOTSUPP;
+}
+
+static const struct gpio_chip template_chip = {
+	.label			= "gpio-tps65218",
+	.owner			= THIS_MODULE,
+	.request		= tps65218_gpio_request,
+	.direction_output	= tps65218_gpio_output,
+	.direction_input	= tps65218_gpio_input,
+	.get			= tps65218_gpio_get,
+	.set			= tps65218_gpio_set,
+	.set_config		= tps65218_gpio_set_config,
+	.can_sleep		= true,
+	.ngpio			= 3,
+	.base			= -1,
+};
+
+static int tps65218_gpio_probe(struct platform_device *pdev)
+{
+	struct tps65218 *tps65218 = dev_get_drvdata(pdev->dev.parent);
+	struct tps65218_gpio *tps65218_gpio;
+	int ret;
+
+	tps65218_gpio = devm_kzalloc(&pdev->dev, sizeof(*tps65218_gpio),
+				     GFP_KERNEL);
+	if (!tps65218_gpio)
+		return -ENOMEM;
+
+	tps65218_gpio->tps65218 = tps65218;
+	tps65218_gpio->gpio_chip = template_chip;
+	tps65218_gpio->gpio_chip.parent = &pdev->dev;
+#ifdef CONFIG_OF_GPIO
+	tps65218_gpio->gpio_chip.of_node = pdev->dev.of_node;
+#endif
+
+	ret = devm_gpiochip_add_data(&pdev->dev, &tps65218_gpio->gpio_chip,
+				     tps65218_gpio);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to register gpiochip, %d\n", ret);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, tps65218_gpio);
+
+	return ret;
+}
+
+static const struct of_device_id tps65218_dt_match[] = {
+	{ .compatible = "ti,tps65218-gpio" },
+	{  }
+};
+MODULE_DEVICE_TABLE(of, tps65218_dt_match);
+
+static const struct platform_device_id tps65218_gpio_id_table[] = {
+	{ "tps65218-gpio", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(platform, tps65218_gpio_id_table);
+
+static struct platform_driver tps65218_gpio_driver = {
+	.driver = {
+		.name = "tps65218-gpio",
+		.of_match_table = of_match_ptr(tps65218_dt_match)
+	},
+	.probe = tps65218_gpio_probe,
+	.id_table = tps65218_gpio_id_table,
+};
+
+module_platform_driver(tps65218_gpio_driver);
+
+MODULE_AUTHOR("Nicolas Saenz Julienne <nicolassaenzj@gmail.com>");
+MODULE_DESCRIPTION("GPO interface for TPS65218 PMICs");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:tps65218-gpio");
diff --git a/drivers/gpio/gpio-tps6586x.c b/drivers/gpio/gpio-tps6586x.c
new file mode 100644
index 000000000..9b6cc74f4
--- /dev/null
+++ b/drivers/gpio/gpio-tps6586x.c
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * TI TPS6586x GPIO driver
+ *
+ * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
+ * Author: Laxman dewangan <ldewangan@nvidia.com>
+ *
+ * Based on tps6586x.c
+ * Copyright (c) 2010 CompuLab Ltd.
+ * Mike Rapoport <mike@compulab.co.il>
+ */
+
+#include <linux/errno.h>
+#include <linux/gpio/driver.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mfd/tps6586x.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+/* GPIO control registers */
+#define TPS6586X_GPIOSET1	0x5d
+#define TPS6586X_GPIOSET2	0x5e
+
+struct tps6586x_gpio {
+	struct gpio_chip gpio_chip;
+	struct device *parent;
+};
+
+static int tps6586x_gpio_get(struct gpio_chip *gc, unsigned offset)
+{
+	struct tps6586x_gpio *tps6586x_gpio = gpiochip_get_data(gc);
+	uint8_t val;
+	int ret;
+
+	ret = tps6586x_read(tps6586x_gpio->parent, TPS6586X_GPIOSET2, &val);
+	if (ret)
+		return ret;
+
+	return !!(val & (1 << offset));
+}
+
+static void tps6586x_gpio_set(struct gpio_chip *gc, unsigned offset,
+			      int value)
+{
+	struct tps6586x_gpio *tps6586x_gpio = gpiochip_get_data(gc);
+
+	tps6586x_update(tps6586x_gpio->parent, TPS6586X_GPIOSET2,
+			value << offset, 1 << offset);
+}
+
+static int tps6586x_gpio_output(struct gpio_chip *gc, unsigned offset,
+				int value)
+{
+	struct tps6586x_gpio *tps6586x_gpio = gpiochip_get_data(gc);
+	uint8_t val, mask;
+
+	tps6586x_gpio_set(gc, offset, value);
+
+	val = 0x1 << (offset * 2);
+	mask = 0x3 << (offset * 2);
+
+	return tps6586x_update(tps6586x_gpio->parent, TPS6586X_GPIOSET1,
+				val, mask);
+}
+
+static int tps6586x_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
+{
+	struct tps6586x_gpio *tps6586x_gpio = gpiochip_get_data(gc);
+
+	return tps6586x_irq_get_virq(tps6586x_gpio->parent,
+				TPS6586X_INT_PLDO_0 + offset);
+}
+
+static int tps6586x_gpio_probe(struct platform_device *pdev)
+{
+	struct tps6586x_platform_data *pdata;
+	struct tps6586x_gpio *tps6586x_gpio;
+	int ret;
+
+	pdata = dev_get_platdata(pdev->dev.parent);
+	tps6586x_gpio = devm_kzalloc(&pdev->dev,
+				sizeof(*tps6586x_gpio), GFP_KERNEL);
+	if (!tps6586x_gpio)
+		return -ENOMEM;
+
+	tps6586x_gpio->parent = pdev->dev.parent;
+
+	tps6586x_gpio->gpio_chip.owner = THIS_MODULE;
+	tps6586x_gpio->gpio_chip.label = pdev->name;
+	tps6586x_gpio->gpio_chip.parent = &pdev->dev;
+	tps6586x_gpio->gpio_chip.ngpio = 4;
+	tps6586x_gpio->gpio_chip.can_sleep = true;
+
+	/* FIXME: add handling of GPIOs as dedicated inputs */
+	tps6586x_gpio->gpio_chip.direction_output = tps6586x_gpio_output;
+	tps6586x_gpio->gpio_chip.set	= tps6586x_gpio_set;
+	tps6586x_gpio->gpio_chip.get	= tps6586x_gpio_get;
+	tps6586x_gpio->gpio_chip.to_irq	= tps6586x_gpio_to_irq;
+
+#ifdef CONFIG_OF_GPIO
+	tps6586x_gpio->gpio_chip.of_node = pdev->dev.parent->of_node;
+#endif
+	if (pdata && pdata->gpio_base)
+		tps6586x_gpio->gpio_chip.base = pdata->gpio_base;
+	else
+		tps6586x_gpio->gpio_chip.base = -1;
+
+	ret = devm_gpiochip_add_data(&pdev->dev, &tps6586x_gpio->gpio_chip,
+				     tps6586x_gpio);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, tps6586x_gpio);
+
+	return ret;
+}
+
+static struct platform_driver tps6586x_gpio_driver = {
+	.driver.name	= "tps6586x-gpio",
+	.probe		= tps6586x_gpio_probe,
+};
+
+static int __init tps6586x_gpio_init(void)
+{
+	return platform_driver_register(&tps6586x_gpio_driver);
+}
+subsys_initcall(tps6586x_gpio_init);
diff --git a/drivers/gpio/gpio-tps65910.c b/drivers/gpio/gpio-tps65910.c
new file mode 100644
index 000000000..0c785b0fd
--- /dev/null
+++ b/drivers/gpio/gpio-tps65910.c
@@ -0,0 +1,189 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * TI TPS6591x GPIO driver
+ *
+ * Copyright 2010 Texas Instruments Inc.
+ *
+ * Author: Graeme Gregory <gg@slimlogic.co.uk>
+ * Author: Jorge Eduardo Candelaria <jedu@slimlogic.co.uk>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/gpio/driver.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/tps65910.h>
+#include <linux/of_device.h>
+
+struct tps65910_gpio {
+	struct gpio_chip gpio_chip;
+	struct tps65910 *tps65910;
+};
+
+static int tps65910_gpio_get(struct gpio_chip *gc, unsigned offset)
+{
+	struct tps65910_gpio *tps65910_gpio = gpiochip_get_data(gc);
+	struct tps65910 *tps65910 = tps65910_gpio->tps65910;
+	unsigned int val;
+
+	tps65910_reg_read(tps65910, TPS65910_GPIO0 + offset, &val);
+
+	if (val & GPIO_STS_MASK)
+		return 1;
+
+	return 0;
+}
+
+static void tps65910_gpio_set(struct gpio_chip *gc, unsigned offset,
+			      int value)
+{
+	struct tps65910_gpio *tps65910_gpio = gpiochip_get_data(gc);
+	struct tps65910 *tps65910 = tps65910_gpio->tps65910;
+
+	if (value)
+		tps65910_reg_set_bits(tps65910, TPS65910_GPIO0 + offset,
+						GPIO_SET_MASK);
+	else
+		tps65910_reg_clear_bits(tps65910, TPS65910_GPIO0 + offset,
+						GPIO_SET_MASK);
+}
+
+static int tps65910_gpio_output(struct gpio_chip *gc, unsigned offset,
+				int value)
+{
+	struct tps65910_gpio *tps65910_gpio = gpiochip_get_data(gc);
+	struct tps65910 *tps65910 = tps65910_gpio->tps65910;
+
+	/* Set the initial value */
+	tps65910_gpio_set(gc, offset, value);
+
+	return tps65910_reg_set_bits(tps65910, TPS65910_GPIO0 + offset,
+						GPIO_CFG_MASK);
+}
+
+static int tps65910_gpio_input(struct gpio_chip *gc, unsigned offset)
+{
+	struct tps65910_gpio *tps65910_gpio = gpiochip_get_data(gc);
+	struct tps65910 *tps65910 = tps65910_gpio->tps65910;
+
+	return tps65910_reg_clear_bits(tps65910, TPS65910_GPIO0 + offset,
+						GPIO_CFG_MASK);
+}
+
+#ifdef CONFIG_OF
+static struct tps65910_board *tps65910_parse_dt_for_gpio(struct device *dev,
+		struct tps65910 *tps65910, int chip_ngpio)
+{
+	struct tps65910_board *tps65910_board = tps65910->of_plat_data;
+	unsigned int prop_array[TPS6591X_MAX_NUM_GPIO];
+	int ngpio = min(chip_ngpio, TPS6591X_MAX_NUM_GPIO);
+	int ret;
+	int idx;
+
+	tps65910_board->gpio_base = -1;
+	ret = of_property_read_u32_array(tps65910->dev->of_node,
+			"ti,en-gpio-sleep", prop_array, ngpio);
+	if (ret < 0) {
+		dev_dbg(dev, "ti,en-gpio-sleep not specified\n");
+		return tps65910_board;
+	}
+
+	for (idx = 0; idx < ngpio; idx++)
+		tps65910_board->en_gpio_sleep[idx] = (prop_array[idx] != 0);
+
+	return tps65910_board;
+}
+#else
+static struct tps65910_board *tps65910_parse_dt_for_gpio(struct device *dev,
+		struct tps65910 *tps65910, int chip_ngpio)
+{
+	return NULL;
+}
+#endif
+
+static int tps65910_gpio_probe(struct platform_device *pdev)
+{
+	struct tps65910 *tps65910 = dev_get_drvdata(pdev->dev.parent);
+	struct tps65910_board *pdata = dev_get_platdata(tps65910->dev);
+	struct tps65910_gpio *tps65910_gpio;
+	int ret;
+	int i;
+
+	tps65910_gpio = devm_kzalloc(&pdev->dev,
+				sizeof(*tps65910_gpio), GFP_KERNEL);
+	if (!tps65910_gpio)
+		return -ENOMEM;
+
+	tps65910_gpio->tps65910 = tps65910;
+
+	tps65910_gpio->gpio_chip.owner = THIS_MODULE;
+	tps65910_gpio->gpio_chip.label = tps65910->i2c_client->name;
+
+	switch (tps65910_chip_id(tps65910)) {
+	case TPS65910:
+		tps65910_gpio->gpio_chip.ngpio = TPS65910_NUM_GPIO;
+		break;
+	case TPS65911:
+		tps65910_gpio->gpio_chip.ngpio = TPS65911_NUM_GPIO;
+		break;
+	default:
+		return -EINVAL;
+	}
+	tps65910_gpio->gpio_chip.can_sleep = true;
+	tps65910_gpio->gpio_chip.direction_input = tps65910_gpio_input;
+	tps65910_gpio->gpio_chip.direction_output = tps65910_gpio_output;
+	tps65910_gpio->gpio_chip.set	= tps65910_gpio_set;
+	tps65910_gpio->gpio_chip.get	= tps65910_gpio_get;
+	tps65910_gpio->gpio_chip.parent = &pdev->dev;
+#ifdef CONFIG_OF_GPIO
+	tps65910_gpio->gpio_chip.of_node = tps65910->dev->of_node;
+#endif
+	if (pdata && pdata->gpio_base)
+		tps65910_gpio->gpio_chip.base = pdata->gpio_base;
+	else
+		tps65910_gpio->gpio_chip.base = -1;
+
+	if (!pdata && tps65910->dev->of_node)
+		pdata = tps65910_parse_dt_for_gpio(&pdev->dev, tps65910,
+			tps65910_gpio->gpio_chip.ngpio);
+
+	if (!pdata)
+		goto skip_init;
+
+	/* Configure sleep control for gpios if provided */
+	for (i = 0; i < tps65910_gpio->gpio_chip.ngpio; ++i) {
+		if (!pdata->en_gpio_sleep[i])
+			continue;
+
+		ret = tps65910_reg_set_bits(tps65910,
+			TPS65910_GPIO0 + i, GPIO_SLEEP_MASK);
+		if (ret < 0)
+			dev_warn(tps65910->dev,
+				"GPIO Sleep setting failed with err %d\n", ret);
+	}
+
+skip_init:
+	ret = devm_gpiochip_add_data(&pdev->dev, &tps65910_gpio->gpio_chip,
+				     tps65910_gpio);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, tps65910_gpio);
+
+	return ret;
+}
+
+static struct platform_driver tps65910_gpio_driver = {
+	.driver.name    = "tps65910-gpio",
+	.probe		= tps65910_gpio_probe,
+};
+
+static int __init tps65910_gpio_init(void)
+{
+	return platform_driver_register(&tps65910_gpio_driver);
+}
+subsys_initcall(tps65910_gpio_init);
diff --git a/drivers/gpio/gpio-tps65912.c b/drivers/gpio/gpio-tps65912.c
new file mode 100644
index 000000000..510d9ed9f
--- /dev/null
+++ b/drivers/gpio/gpio-tps65912.c
@@ -0,0 +1,141 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * GPIO driver for TI TPS65912x PMICs
+ *
+ * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/
+ *	Andrew F. Davis <afd@ti.com>
+ *
+ * Based on the Arizona GPIO driver and the previous TPS65912 driver by
+ * Margarita Olaya Cabrera <magi@slimlogic.co.uk>
+ */
+
+#include <linux/gpio/driver.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <linux/mfd/tps65912.h>
+
+struct tps65912_gpio {
+	struct gpio_chip gpio_chip;
+	struct tps65912 *tps;
+};
+
+static int tps65912_gpio_get_direction(struct gpio_chip *gc,
+				       unsigned offset)
+{
+	struct tps65912_gpio *gpio = gpiochip_get_data(gc);
+
+	int ret, val;
+
+	ret = regmap_read(gpio->tps->regmap, TPS65912_GPIO1 + offset, &val);
+	if (ret)
+		return ret;
+
+	if (val & GPIO_CFG_MASK)
+		return GPIO_LINE_DIRECTION_OUT;
+	else
+		return GPIO_LINE_DIRECTION_IN;
+}
+
+static int tps65912_gpio_direction_input(struct gpio_chip *gc, unsigned offset)
+{
+	struct tps65912_gpio *gpio = gpiochip_get_data(gc);
+
+	return regmap_update_bits(gpio->tps->regmap, TPS65912_GPIO1 + offset,
+				  GPIO_CFG_MASK, 0);
+}
+
+static int tps65912_gpio_direction_output(struct gpio_chip *gc,
+					  unsigned offset, int value)
+{
+	struct tps65912_gpio *gpio = gpiochip_get_data(gc);
+
+	/* Set the initial value */
+	regmap_update_bits(gpio->tps->regmap, TPS65912_GPIO1 + offset,
+			   GPIO_SET_MASK, value ? GPIO_SET_MASK : 0);
+
+	return regmap_update_bits(gpio->tps->regmap, TPS65912_GPIO1 + offset,
+				  GPIO_CFG_MASK, GPIO_CFG_MASK);
+}
+
+static int tps65912_gpio_get(struct gpio_chip *gc, unsigned offset)
+{
+	struct tps65912_gpio *gpio = gpiochip_get_data(gc);
+	int ret, val;
+
+	ret = regmap_read(gpio->tps->regmap, TPS65912_GPIO1 + offset, &val);
+	if (ret)
+		return ret;
+
+	if (val & GPIO_STS_MASK)
+		return 1;
+
+	return 0;
+}
+
+static void tps65912_gpio_set(struct gpio_chip *gc, unsigned offset,
+			      int value)
+{
+	struct tps65912_gpio *gpio = gpiochip_get_data(gc);
+
+	regmap_update_bits(gpio->tps->regmap, TPS65912_GPIO1 + offset,
+			   GPIO_SET_MASK, value ? GPIO_SET_MASK : 0);
+}
+
+static const struct gpio_chip template_chip = {
+	.label			= "tps65912-gpio",
+	.owner			= THIS_MODULE,
+	.get_direction		= tps65912_gpio_get_direction,
+	.direction_input	= tps65912_gpio_direction_input,
+	.direction_output	= tps65912_gpio_direction_output,
+	.get			= tps65912_gpio_get,
+	.set			= tps65912_gpio_set,
+	.base			= -1,
+	.ngpio			= 5,
+	.can_sleep		= true,
+};
+
+static int tps65912_gpio_probe(struct platform_device *pdev)
+{
+	struct tps65912 *tps = dev_get_drvdata(pdev->dev.parent);
+	struct tps65912_gpio *gpio;
+	int ret;
+
+	gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
+	if (!gpio)
+		return -ENOMEM;
+
+	gpio->tps = dev_get_drvdata(pdev->dev.parent);
+	gpio->gpio_chip = template_chip;
+	gpio->gpio_chip.parent = tps->dev;
+
+	ret = devm_gpiochip_add_data(&pdev->dev, &gpio->gpio_chip,
+				     gpio);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, gpio);
+
+	return 0;
+}
+
+static const struct platform_device_id tps65912_gpio_id_table[] = {
+	{ "tps65912-gpio", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(platform, tps65912_gpio_id_table);
+
+static struct platform_driver tps65912_gpio_driver = {
+	.driver = {
+		.name = "tps65912-gpio",
+	},
+	.probe = tps65912_gpio_probe,
+	.id_table = tps65912_gpio_id_table,
+};
+module_platform_driver(tps65912_gpio_driver);
+
+MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>");
+MODULE_DESCRIPTION("TPS65912 GPIO driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-tps68470.c b/drivers/gpio/gpio-tps68470.c
new file mode 100644
index 000000000..e19eb7c98
--- /dev/null
+++ b/drivers/gpio/gpio-tps68470.c
@@ -0,0 +1,168 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * GPIO driver for TPS68470 PMIC
+ *
+ * Copyright (C) 2017 Intel Corporation
+ *
+ * Authors:
+ *	Antti Laakso <antti.laakso@intel.com>
+ *	Tianshu Qiu <tian.shu.qiu@intel.com>
+ *	Jian Xu Zheng <jian.xu.zheng@intel.com>
+ *	Yuning Pu <yuning.pu@intel.com>
+ */
+
+#include <linux/gpio/driver.h>
+#include <linux/mfd/tps68470.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define TPS68470_N_LOGIC_OUTPUT	3
+#define TPS68470_N_REGULAR_GPIO	7
+#define TPS68470_N_GPIO	(TPS68470_N_LOGIC_OUTPUT + TPS68470_N_REGULAR_GPIO)
+
+struct tps68470_gpio_data {
+	struct regmap *tps68470_regmap;
+	struct gpio_chip gc;
+};
+
+static int tps68470_gpio_get(struct gpio_chip *gc, unsigned int offset)
+{
+	struct tps68470_gpio_data *tps68470_gpio = gpiochip_get_data(gc);
+	struct regmap *regmap = tps68470_gpio->tps68470_regmap;
+	unsigned int reg = TPS68470_REG_GPDO;
+	int val, ret;
+
+	if (offset >= TPS68470_N_REGULAR_GPIO) {
+		offset -= TPS68470_N_REGULAR_GPIO;
+		reg = TPS68470_REG_SGPO;
+	}
+
+	ret = regmap_read(regmap, reg, &val);
+	if (ret) {
+		dev_err(tps68470_gpio->gc.parent, "reg 0x%x read failed\n",
+			TPS68470_REG_SGPO);
+		return ret;
+	}
+	return !!(val & BIT(offset));
+}
+
+static int tps68470_gpio_get_direction(struct gpio_chip *gc,
+				       unsigned int offset)
+{
+	struct tps68470_gpio_data *tps68470_gpio = gpiochip_get_data(gc);
+	struct regmap *regmap = tps68470_gpio->tps68470_regmap;
+	int val, ret;
+
+	/* rest are always outputs */
+	if (offset >= TPS68470_N_REGULAR_GPIO)
+		return GPIO_LINE_DIRECTION_OUT;
+
+	ret = regmap_read(regmap, TPS68470_GPIO_CTL_REG_A(offset), &val);
+	if (ret) {
+		dev_err(tps68470_gpio->gc.parent, "reg 0x%x read failed\n",
+			TPS68470_GPIO_CTL_REG_A(offset));
+		return ret;
+	}
+
+	val &= TPS68470_GPIO_MODE_MASK;
+	return val >= TPS68470_GPIO_MODE_OUT_CMOS ? GPIO_LINE_DIRECTION_OUT :
+						    GPIO_LINE_DIRECTION_IN;
+}
+
+static void tps68470_gpio_set(struct gpio_chip *gc, unsigned int offset,
+				int value)
+{
+	struct tps68470_gpio_data *tps68470_gpio = gpiochip_get_data(gc);
+	struct regmap *regmap = tps68470_gpio->tps68470_regmap;
+	unsigned int reg = TPS68470_REG_GPDO;
+
+	if (offset >= TPS68470_N_REGULAR_GPIO) {
+		reg = TPS68470_REG_SGPO;
+		offset -= TPS68470_N_REGULAR_GPIO;
+	}
+
+	regmap_update_bits(regmap, reg, BIT(offset), value ? BIT(offset) : 0);
+}
+
+static int tps68470_gpio_output(struct gpio_chip *gc, unsigned int offset,
+				int value)
+{
+	struct tps68470_gpio_data *tps68470_gpio = gpiochip_get_data(gc);
+	struct regmap *regmap = tps68470_gpio->tps68470_regmap;
+
+	/* Set the initial value */
+	tps68470_gpio_set(gc, offset, value);
+
+	/* rest are always outputs */
+	if (offset >= TPS68470_N_REGULAR_GPIO)
+		return 0;
+
+	return regmap_update_bits(regmap, TPS68470_GPIO_CTL_REG_A(offset),
+				 TPS68470_GPIO_MODE_MASK,
+				 TPS68470_GPIO_MODE_OUT_CMOS);
+}
+
+static int tps68470_gpio_input(struct gpio_chip *gc, unsigned int offset)
+{
+	struct tps68470_gpio_data *tps68470_gpio = gpiochip_get_data(gc);
+	struct regmap *regmap = tps68470_gpio->tps68470_regmap;
+
+	/* rest are always outputs */
+	if (offset >= TPS68470_N_REGULAR_GPIO)
+		return -EINVAL;
+
+	return regmap_update_bits(regmap, TPS68470_GPIO_CTL_REG_A(offset),
+				   TPS68470_GPIO_MODE_MASK, 0x00);
+}
+
+static const char *tps68470_names[TPS68470_N_GPIO] = {
+	"gpio.0", "gpio.1", "gpio.2", "gpio.3",
+	"gpio.4", "gpio.5", "gpio.6",
+	"s_enable", "s_idle", "s_resetn",
+};
+
+static int tps68470_gpio_probe(struct platform_device *pdev)
+{
+	struct tps68470_gpio_data *tps68470_gpio;
+	int ret;
+
+	tps68470_gpio = devm_kzalloc(&pdev->dev, sizeof(*tps68470_gpio),
+				     GFP_KERNEL);
+	if (!tps68470_gpio)
+		return -ENOMEM;
+
+	tps68470_gpio->tps68470_regmap = dev_get_drvdata(pdev->dev.parent);
+	tps68470_gpio->gc.label = "tps68470-gpio";
+	tps68470_gpio->gc.owner = THIS_MODULE;
+	tps68470_gpio->gc.direction_input = tps68470_gpio_input;
+	tps68470_gpio->gc.direction_output = tps68470_gpio_output;
+	tps68470_gpio->gc.get = tps68470_gpio_get;
+	tps68470_gpio->gc.get_direction = tps68470_gpio_get_direction;
+	tps68470_gpio->gc.set = tps68470_gpio_set;
+	tps68470_gpio->gc.can_sleep = true;
+	tps68470_gpio->gc.names = tps68470_names;
+	tps68470_gpio->gc.ngpio = TPS68470_N_GPIO;
+	tps68470_gpio->gc.base = -1;
+	tps68470_gpio->gc.parent = &pdev->dev;
+
+	ret = devm_gpiochip_add_data(&pdev->dev, &tps68470_gpio->gc,
+				     tps68470_gpio);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to register gpio_chip: %d\n", ret);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, tps68470_gpio);
+
+	return ret;
+}
+
+static struct platform_driver tps68470_gpio_driver = {
+	.driver = {
+		   .name = "tps68470-gpio",
+	},
+	.probe = tps68470_gpio_probe,
+};
+
+builtin_platform_driver(tps68470_gpio_driver)
diff --git a/drivers/gpio/gpio-tqmx86.c b/drivers/gpio/gpio-tqmx86.c
new file mode 100644
index 000000000..0f5d17f34
--- /dev/null
+++ b/drivers/gpio/gpio-tqmx86.c
@@ -0,0 +1,345 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * TQ-Systems TQMx86 PLD GPIO driver
+ *
+ * Based on vendor driver by:
+ *   Vadim V.Vlasov <vvlasov@dev.rtsoft.ru>
+ */
+
+#include <linux/bitops.h>
+#include <linux/errno.h>
+#include <linux/gpio/driver.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/slab.h>
+
+#define TQMX86_NGPIO	8
+#define TQMX86_NGPO	4	/* 0-3 - output */
+#define TQMX86_NGPI	4	/* 4-7 - input */
+#define TQMX86_DIR_INPUT_MASK	0xf0	/* 0-3 - output, 4-7 - input */
+
+#define TQMX86_GPIODD	0	/* GPIO Data Direction Register */
+#define TQMX86_GPIOD	1	/* GPIO Data Register */
+#define TQMX86_GPIIC	3	/* GPI Interrupt Configuration Register */
+#define TQMX86_GPIIS	4	/* GPI Interrupt Status Register */
+
+#define TQMX86_GPII_FALLING	BIT(0)
+#define TQMX86_GPII_RISING	BIT(1)
+#define TQMX86_GPII_MASK	(BIT(0) | BIT(1))
+#define TQMX86_GPII_BITS	2
+
+struct tqmx86_gpio_data {
+	struct gpio_chip	chip;
+	struct irq_chip		irq_chip;
+	void __iomem		*io_base;
+	int			irq;
+	raw_spinlock_t		spinlock;
+	u8			irq_type[TQMX86_NGPI];
+};
+
+static u8 tqmx86_gpio_read(struct tqmx86_gpio_data *gd, unsigned int reg)
+{
+	return ioread8(gd->io_base + reg);
+}
+
+static void tqmx86_gpio_write(struct tqmx86_gpio_data *gd, u8 val,
+			      unsigned int reg)
+{
+	iowrite8(val, gd->io_base + reg);
+}
+
+static int tqmx86_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+	struct tqmx86_gpio_data *gpio = gpiochip_get_data(chip);
+
+	return !!(tqmx86_gpio_read(gpio, TQMX86_GPIOD) & BIT(offset));
+}
+
+static void tqmx86_gpio_set(struct gpio_chip *chip, unsigned int offset,
+			    int value)
+{
+	struct tqmx86_gpio_data *gpio = gpiochip_get_data(chip);
+	unsigned long flags;
+	u8 val;
+
+	raw_spin_lock_irqsave(&gpio->spinlock, flags);
+	val = tqmx86_gpio_read(gpio, TQMX86_GPIOD);
+	if (value)
+		val |= BIT(offset);
+	else
+		val &= ~BIT(offset);
+	tqmx86_gpio_write(gpio, val, TQMX86_GPIOD);
+	raw_spin_unlock_irqrestore(&gpio->spinlock, flags);
+}
+
+static int tqmx86_gpio_direction_input(struct gpio_chip *chip,
+				       unsigned int offset)
+{
+	/* Direction cannot be changed. Validate is an input. */
+	if (BIT(offset) & TQMX86_DIR_INPUT_MASK)
+		return 0;
+	else
+		return -EINVAL;
+}
+
+static int tqmx86_gpio_direction_output(struct gpio_chip *chip,
+					unsigned int offset,
+					int value)
+{
+	/* Direction cannot be changed, validate is an output */
+	if (BIT(offset) & TQMX86_DIR_INPUT_MASK)
+		return -EINVAL;
+
+	tqmx86_gpio_set(chip, offset, value);
+	return 0;
+}
+
+static int tqmx86_gpio_get_direction(struct gpio_chip *chip,
+				     unsigned int offset)
+{
+	if (TQMX86_DIR_INPUT_MASK & BIT(offset))
+		return GPIO_LINE_DIRECTION_IN;
+
+	return GPIO_LINE_DIRECTION_OUT;
+}
+
+static void tqmx86_gpio_irq_mask(struct irq_data *data)
+{
+	unsigned int offset = (data->hwirq - TQMX86_NGPO);
+	struct tqmx86_gpio_data *gpio = gpiochip_get_data(
+		irq_data_get_irq_chip_data(data));
+	unsigned long flags;
+	u8 gpiic, mask;
+
+	mask = TQMX86_GPII_MASK << (offset * TQMX86_GPII_BITS);
+
+	raw_spin_lock_irqsave(&gpio->spinlock, flags);
+	gpiic = tqmx86_gpio_read(gpio, TQMX86_GPIIC);
+	gpiic &= ~mask;
+	tqmx86_gpio_write(gpio, gpiic, TQMX86_GPIIC);
+	raw_spin_unlock_irqrestore(&gpio->spinlock, flags);
+}
+
+static void tqmx86_gpio_irq_unmask(struct irq_data *data)
+{
+	unsigned int offset = (data->hwirq - TQMX86_NGPO);
+	struct tqmx86_gpio_data *gpio = gpiochip_get_data(
+		irq_data_get_irq_chip_data(data));
+	unsigned long flags;
+	u8 gpiic, mask;
+
+	mask = TQMX86_GPII_MASK << (offset * TQMX86_GPII_BITS);
+
+	raw_spin_lock_irqsave(&gpio->spinlock, flags);
+	gpiic = tqmx86_gpio_read(gpio, TQMX86_GPIIC);
+	gpiic &= ~mask;
+	gpiic |= gpio->irq_type[offset] << (offset * TQMX86_GPII_BITS);
+	tqmx86_gpio_write(gpio, gpiic, TQMX86_GPIIC);
+	raw_spin_unlock_irqrestore(&gpio->spinlock, flags);
+}
+
+static int tqmx86_gpio_irq_set_type(struct irq_data *data, unsigned int type)
+{
+	struct tqmx86_gpio_data *gpio = gpiochip_get_data(
+		irq_data_get_irq_chip_data(data));
+	unsigned int offset = (data->hwirq - TQMX86_NGPO);
+	unsigned int edge_type = type & IRQF_TRIGGER_MASK;
+	unsigned long flags;
+	u8 new_type, gpiic;
+
+	switch (edge_type) {
+	case IRQ_TYPE_EDGE_RISING:
+		new_type = TQMX86_GPII_RISING;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		new_type = TQMX86_GPII_FALLING;
+		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		new_type = TQMX86_GPII_FALLING | TQMX86_GPII_RISING;
+		break;
+	default:
+		return -EINVAL; /* not supported */
+	}
+
+	gpio->irq_type[offset] = new_type;
+
+	raw_spin_lock_irqsave(&gpio->spinlock, flags);
+	gpiic = tqmx86_gpio_read(gpio, TQMX86_GPIIC);
+	gpiic &= ~((TQMX86_GPII_MASK) << (offset * TQMX86_GPII_BITS));
+	gpiic |= new_type << (offset * TQMX86_GPII_BITS);
+	tqmx86_gpio_write(gpio, gpiic, TQMX86_GPIIC);
+	raw_spin_unlock_irqrestore(&gpio->spinlock, flags);
+
+	return 0;
+}
+
+static void tqmx86_gpio_irq_handler(struct irq_desc *desc)
+{
+	struct gpio_chip *chip = irq_desc_get_handler_data(desc);
+	struct tqmx86_gpio_data *gpio = gpiochip_get_data(chip);
+	struct irq_chip *irq_chip = irq_desc_get_chip(desc);
+	unsigned long irq_bits;
+	int i = 0, child_irq;
+	u8 irq_status;
+
+	chained_irq_enter(irq_chip, desc);
+
+	irq_status = tqmx86_gpio_read(gpio, TQMX86_GPIIS);
+	tqmx86_gpio_write(gpio, irq_status, TQMX86_GPIIS);
+
+	irq_bits = irq_status;
+	for_each_set_bit(i, &irq_bits, TQMX86_NGPI) {
+		child_irq = irq_find_mapping(gpio->chip.irq.domain,
+					     i + TQMX86_NGPO);
+		generic_handle_irq(child_irq);
+	}
+
+	chained_irq_exit(irq_chip, desc);
+}
+
+/* Minimal runtime PM is needed by the IRQ subsystem */
+static int __maybe_unused tqmx86_gpio_runtime_suspend(struct device *dev)
+{
+	return 0;
+}
+
+static int __maybe_unused tqmx86_gpio_runtime_resume(struct device *dev)
+{
+	return 0;
+}
+
+static const struct dev_pm_ops tqmx86_gpio_dev_pm_ops = {
+	SET_RUNTIME_PM_OPS(tqmx86_gpio_runtime_suspend,
+			   tqmx86_gpio_runtime_resume, NULL)
+};
+
+static void tqmx86_init_irq_valid_mask(struct gpio_chip *chip,
+				       unsigned long *valid_mask,
+				       unsigned int ngpios)
+{
+	/* Only GPIOs 4-7 are valid for interrupts. Clear the others */
+	clear_bit(0, valid_mask);
+	clear_bit(1, valid_mask);
+	clear_bit(2, valid_mask);
+	clear_bit(3, valid_mask);
+}
+
+static int tqmx86_gpio_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct tqmx86_gpio_data *gpio;
+	struct gpio_chip *chip;
+	struct gpio_irq_chip *girq;
+	void __iomem *io_base;
+	struct resource *res;
+	int ret, irq;
+
+	irq = platform_get_irq_optional(pdev, 0);
+	if (irq < 0 && irq != -ENXIO)
+		return irq;
+
+	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "Cannot get I/O\n");
+		return -ENODEV;
+	}
+
+	io_base = devm_ioport_map(&pdev->dev, res->start, resource_size(res));
+	if (!io_base)
+		return -ENOMEM;
+
+	gpio = devm_kzalloc(dev, sizeof(*gpio), GFP_KERNEL);
+	if (!gpio)
+		return -ENOMEM;
+
+	raw_spin_lock_init(&gpio->spinlock);
+	gpio->io_base = io_base;
+
+	tqmx86_gpio_write(gpio, (u8)~TQMX86_DIR_INPUT_MASK, TQMX86_GPIODD);
+
+	platform_set_drvdata(pdev, gpio);
+
+	chip = &gpio->chip;
+	chip->label = "gpio-tqmx86";
+	chip->owner = THIS_MODULE;
+	chip->can_sleep = false;
+	chip->base = -1;
+	chip->direction_input = tqmx86_gpio_direction_input;
+	chip->direction_output = tqmx86_gpio_direction_output;
+	chip->get_direction = tqmx86_gpio_get_direction;
+	chip->get = tqmx86_gpio_get;
+	chip->set = tqmx86_gpio_set;
+	chip->ngpio = TQMX86_NGPIO;
+	chip->parent = pdev->dev.parent;
+
+	pm_runtime_enable(&pdev->dev);
+
+	if (irq > 0) {
+		struct irq_chip *irq_chip = &gpio->irq_chip;
+		u8 irq_status;
+
+		irq_chip->name = chip->label;
+		irq_chip->parent_device = &pdev->dev;
+		irq_chip->irq_mask = tqmx86_gpio_irq_mask;
+		irq_chip->irq_unmask = tqmx86_gpio_irq_unmask;
+		irq_chip->irq_set_type = tqmx86_gpio_irq_set_type;
+
+		/* Mask all interrupts */
+		tqmx86_gpio_write(gpio, 0, TQMX86_GPIIC);
+
+		/* Clear all pending interrupts */
+		irq_status = tqmx86_gpio_read(gpio, TQMX86_GPIIS);
+		tqmx86_gpio_write(gpio, irq_status, TQMX86_GPIIS);
+
+		girq = &chip->irq;
+		girq->chip = irq_chip;
+		girq->parent_handler = tqmx86_gpio_irq_handler;
+		girq->num_parents = 1;
+		girq->parents = devm_kcalloc(&pdev->dev, 1,
+					     sizeof(*girq->parents),
+					     GFP_KERNEL);
+		if (!girq->parents) {
+			ret = -ENOMEM;
+			goto out_pm_dis;
+		}
+		girq->parents[0] = irq;
+		girq->default_type = IRQ_TYPE_NONE;
+		girq->handler = handle_simple_irq;
+		girq->init_valid_mask = tqmx86_init_irq_valid_mask;
+	}
+
+	ret = devm_gpiochip_add_data(dev, chip, gpio);
+	if (ret) {
+		dev_err(dev, "Could not register GPIO chip\n");
+		goto out_pm_dis;
+	}
+
+	dev_info(dev, "GPIO functionality initialized with %d pins\n",
+		 chip->ngpio);
+
+	return 0;
+
+out_pm_dis:
+	pm_runtime_disable(&pdev->dev);
+
+	return ret;
+}
+
+static struct platform_driver tqmx86_gpio_driver = {
+	.driver = {
+		.name = "tqmx86-gpio",
+		.pm = &tqmx86_gpio_dev_pm_ops,
+	},
+	.probe		= tqmx86_gpio_probe,
+};
+
+module_platform_driver(tqmx86_gpio_driver);
+
+MODULE_DESCRIPTION("TQMx86 PLD GPIO Driver");
+MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:tqmx86-gpio");
diff --git a/drivers/gpio/gpio-ts4800.c b/drivers/gpio/gpio-ts4800.c
new file mode 100644
index 000000000..8c0d82d92
--- /dev/null
+++ b/drivers/gpio/gpio-ts4800.c
@@ -0,0 +1,81 @@
+/*
+ * GPIO driver for the TS-4800 board
+ *
+ * Copyright (c) 2016 - Savoir-faire Linux
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/gpio/driver.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+#define DEFAULT_PIN_NUMBER      16
+#define INPUT_REG_OFFSET        0x00
+#define OUTPUT_REG_OFFSET       0x02
+#define DIRECTION_REG_OFFSET    0x04
+
+static int ts4800_gpio_probe(struct platform_device *pdev)
+{
+	struct device_node *node;
+	struct gpio_chip *chip;
+	void __iomem *base_addr;
+	int retval;
+	u32 ngpios;
+
+	chip = devm_kzalloc(&pdev->dev, sizeof(struct gpio_chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	base_addr = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base_addr))
+		return PTR_ERR(base_addr);
+
+	node = pdev->dev.of_node;
+	if (!node)
+		return -EINVAL;
+
+	retval = of_property_read_u32(node, "ngpios", &ngpios);
+	if (retval == -EINVAL)
+		ngpios = DEFAULT_PIN_NUMBER;
+	else if (retval)
+		return retval;
+
+	retval = bgpio_init(chip, &pdev->dev, 2, base_addr + INPUT_REG_OFFSET,
+			    base_addr + OUTPUT_REG_OFFSET, NULL,
+			    base_addr + DIRECTION_REG_OFFSET, NULL, 0);
+	if (retval) {
+		dev_err(&pdev->dev, "bgpio_init failed\n");
+		return retval;
+	}
+
+	chip->ngpio = ngpios;
+
+	platform_set_drvdata(pdev, chip);
+
+	return devm_gpiochip_add_data(&pdev->dev, chip, NULL);
+}
+
+static const struct of_device_id ts4800_gpio_of_match[] = {
+	{ .compatible = "technologic,ts4800-gpio", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, ts4800_gpio_of_match);
+
+static struct platform_driver ts4800_gpio_driver = {
+	.driver = {
+		   .name = "ts4800-gpio",
+		   .of_match_table = ts4800_gpio_of_match,
+		   },
+	.probe = ts4800_gpio_probe,
+};
+
+module_platform_driver_probe(ts4800_gpio_driver, ts4800_gpio_probe);
+
+MODULE_AUTHOR("Julien Grossholtz <julien.grossholtz@savoirfairelinux.com>");
+MODULE_DESCRIPTION("TS4800 FPGA GPIO driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-ts4900.c b/drivers/gpio/gpio-ts4900.c
new file mode 100644
index 000000000..d918d2df4
--- /dev/null
+++ b/drivers/gpio/gpio-ts4900.c
@@ -0,0 +1,202 @@
+/*
+ * Digital I/O driver for Technologic Systems I2C FPGA Core
+ *
+ * Copyright (C) 2015, 2018 Technologic Systems
+ * Copyright (C) 2016 Savoir-Faire Linux
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether expressed or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License version 2 for more details.
+ */
+
+#include <linux/gpio/driver.h>
+#include <linux/i2c.h>
+#include <linux/of_device.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+#define DEFAULT_PIN_NUMBER	32
+/*
+ * Register bits used by the GPIO device
+ * Some boards, such as TS-7970 do not have a separate input bit
+ */
+#define TS4900_GPIO_OE		0x01
+#define TS4900_GPIO_OUT		0x02
+#define TS4900_GPIO_IN		0x04
+#define TS7970_GPIO_IN		0x02
+
+struct ts4900_gpio_priv {
+	struct regmap *regmap;
+	struct gpio_chip gpio_chip;
+	unsigned int input_bit;
+};
+
+static int ts4900_gpio_get_direction(struct gpio_chip *chip,
+				     unsigned int offset)
+{
+	struct ts4900_gpio_priv *priv = gpiochip_get_data(chip);
+	unsigned int reg;
+
+	regmap_read(priv->regmap, offset, &reg);
+
+	if (reg & TS4900_GPIO_OE)
+		return GPIO_LINE_DIRECTION_OUT;
+
+	return GPIO_LINE_DIRECTION_IN;
+}
+
+static int ts4900_gpio_direction_input(struct gpio_chip *chip,
+				       unsigned int offset)
+{
+	struct ts4900_gpio_priv *priv = gpiochip_get_data(chip);
+
+	/* Only clear the OE bit here, requires a RMW. Prevents potential issue
+	 * with OE and data getting to the physical pin at different times.
+	 */
+	return regmap_update_bits(priv->regmap, offset, TS4900_GPIO_OE, 0);
+}
+
+static int ts4900_gpio_direction_output(struct gpio_chip *chip,
+					unsigned int offset, int value)
+{
+	struct ts4900_gpio_priv *priv = gpiochip_get_data(chip);
+	unsigned int reg;
+	int ret;
+
+	/* If changing from an input to an output, we need to first set the
+	 * proper data bit to what is requested and then set OE bit. This
+	 * prevents a glitch that can occur on the IO line
+	 */
+	regmap_read(priv->regmap, offset, &reg);
+	if (!(reg & TS4900_GPIO_OE)) {
+		if (value)
+			reg = TS4900_GPIO_OUT;
+		else
+			reg &= ~TS4900_GPIO_OUT;
+
+		regmap_write(priv->regmap, offset, reg);
+	}
+
+	if (value)
+		ret = regmap_write(priv->regmap, offset, TS4900_GPIO_OE |
+							 TS4900_GPIO_OUT);
+	else
+		ret = regmap_write(priv->regmap, offset, TS4900_GPIO_OE);
+
+	return ret;
+}
+
+static int ts4900_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+	struct ts4900_gpio_priv *priv = gpiochip_get_data(chip);
+	unsigned int reg;
+
+	regmap_read(priv->regmap, offset, &reg);
+
+	return !!(reg & priv->input_bit);
+}
+
+static void ts4900_gpio_set(struct gpio_chip *chip, unsigned int offset,
+			    int value)
+{
+	struct ts4900_gpio_priv *priv = gpiochip_get_data(chip);
+
+	if (value)
+		regmap_update_bits(priv->regmap, offset, TS4900_GPIO_OUT,
+				   TS4900_GPIO_OUT);
+	else
+		regmap_update_bits(priv->regmap, offset, TS4900_GPIO_OUT, 0);
+}
+
+static const struct regmap_config ts4900_regmap_config = {
+	.reg_bits = 16,
+	.val_bits = 8,
+};
+
+static const struct gpio_chip template_chip = {
+	.label			= "ts4900-gpio",
+	.owner			= THIS_MODULE,
+	.get_direction		= ts4900_gpio_get_direction,
+	.direction_input	= ts4900_gpio_direction_input,
+	.direction_output	= ts4900_gpio_direction_output,
+	.get			= ts4900_gpio_get,
+	.set			= ts4900_gpio_set,
+	.base			= -1,
+	.can_sleep		= true,
+};
+
+static const struct of_device_id ts4900_gpio_of_match_table[] = {
+	{
+		.compatible = "technologic,ts4900-gpio",
+		.data = (void *)TS4900_GPIO_IN,
+	}, {
+		.compatible = "technologic,ts7970-gpio",
+		.data = (void *)TS7970_GPIO_IN,
+	},
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, ts4900_gpio_of_match_table);
+
+static int ts4900_gpio_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct ts4900_gpio_priv *priv;
+	u32 ngpio;
+	int ret;
+
+	if (of_property_read_u32(client->dev.of_node, "ngpios", &ngpio))
+		ngpio = DEFAULT_PIN_NUMBER;
+
+	priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->gpio_chip = template_chip;
+	priv->gpio_chip.label = "ts4900-gpio";
+	priv->gpio_chip.ngpio = ngpio;
+	priv->gpio_chip.parent = &client->dev;
+	priv->input_bit = (uintptr_t)of_device_get_match_data(&client->dev);
+
+	priv->regmap = devm_regmap_init_i2c(client, &ts4900_regmap_config);
+	if (IS_ERR(priv->regmap)) {
+		ret = PTR_ERR(priv->regmap);
+		dev_err(&client->dev, "Failed to allocate register map: %d\n",
+			ret);
+		return ret;
+	}
+
+	ret = devm_gpiochip_add_data(&client->dev, &priv->gpio_chip, priv);
+	if (ret < 0) {
+		dev_err(&client->dev, "Unable to register gpiochip\n");
+		return ret;
+	}
+
+	i2c_set_clientdata(client, priv);
+
+	return 0;
+}
+
+static const struct i2c_device_id ts4900_gpio_id_table[] = {
+	{ "ts4900-gpio", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(i2c, ts4900_gpio_id_table);
+
+static struct i2c_driver ts4900_gpio_driver = {
+	.driver = {
+		.name = "ts4900-gpio",
+		.of_match_table = ts4900_gpio_of_match_table,
+	},
+	.probe = ts4900_gpio_probe,
+	.id_table = ts4900_gpio_id_table,
+};
+module_i2c_driver(ts4900_gpio_driver);
+
+MODULE_AUTHOR("Technologic Systems");
+MODULE_DESCRIPTION("GPIO interface for Technologic Systems I2C-FPGA core");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/gpio-ts5500.c b/drivers/gpio/gpio-ts5500.c
new file mode 100644
index 000000000..c91890488
--- /dev/null
+++ b/drivers/gpio/gpio-ts5500.c
@@ -0,0 +1,449 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Digital I/O driver for Technologic Systems TS-5500
+ *
+ * Copyright (c) 2012 Savoir-faire Linux Inc.
+ *	Vivien Didelot <vivien.didelot@savoirfairelinux.com>
+ *
+ * Technologic Systems platforms have pin blocks, exposing several Digital
+ * Input/Output lines (DIO). This driver aims to support single pin blocks.
+ * In that sense, the support is not limited to the TS-5500 blocks.
+ * Actually, the following platforms have DIO support:
+ *
+ * TS-5500:
+ *   Documentation: http://wiki.embeddedarm.com/wiki/TS-5500
+ *   Blocks: DIO1, DIO2 and LCD port.
+ *
+ * TS-5600:
+ *   Documentation: http://wiki.embeddedarm.com/wiki/TS-5600
+ *   Blocks: LCD port (identical to TS-5500 LCD).
+ */
+
+#include <linux/bitops.h>
+#include <linux/gpio/driver.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+/* List of supported Technologic Systems platforms DIO blocks */
+enum ts5500_blocks { TS5500_DIO1, TS5500_DIO2, TS5500_LCD, TS5600_LCD };
+
+struct ts5500_priv {
+	const struct ts5500_dio *pinout;
+	struct gpio_chip gpio_chip;
+	spinlock_t lock;
+	bool strap;
+	u8 hwirq;
+};
+
+/*
+ * Hex 7D is used to control several blocks (e.g. DIO2 and LCD port).
+ * This flag ensures that the region has been requested by this driver.
+ */
+static bool hex7d_reserved;
+
+/*
+ * This structure is used to describe capabilities of DIO lines,
+ * such as available directions and connected interrupt (if any).
+ */
+struct ts5500_dio {
+	const u8 value_addr;
+	const u8 value_mask;
+	const u8 control_addr;
+	const u8 control_mask;
+	const bool no_input;
+	const bool no_output;
+	const u8 irq;
+};
+
+#define TS5500_DIO_IN_OUT(vaddr, vbit, caddr, cbit)	\
+	{						\
+		.value_addr = vaddr,			\
+		.value_mask = BIT(vbit),		\
+		.control_addr = caddr,			\
+		.control_mask = BIT(cbit),		\
+	}
+
+#define TS5500_DIO_IN(addr, bit)		\
+	{					\
+		.value_addr = addr,		\
+		.value_mask = BIT(bit),		\
+		.no_output = true,		\
+	}
+
+#define TS5500_DIO_IN_IRQ(addr, bit, _irq)	\
+	{					\
+		.value_addr = addr,		\
+		.value_mask = BIT(bit),		\
+		.no_output = true,		\
+		.irq = _irq,			\
+	}
+
+#define TS5500_DIO_OUT(addr, bit)		\
+	{					\
+		.value_addr = addr,		\
+		.value_mask = BIT(bit),		\
+		.no_input = true,		\
+	}
+
+/*
+ * Input/Output DIO lines are programmed in groups of 4. Their values are
+ * available through 4 consecutive bits in a value port, whereas the direction
+ * of these 4 lines is driven by only 1 bit in a control port.
+ */
+#define TS5500_DIO_GROUP(vaddr, vbitfrom, caddr, cbit)		\
+	TS5500_DIO_IN_OUT(vaddr, vbitfrom + 0, caddr, cbit),	\
+	TS5500_DIO_IN_OUT(vaddr, vbitfrom + 1, caddr, cbit),	\
+	TS5500_DIO_IN_OUT(vaddr, vbitfrom + 2, caddr, cbit),	\
+	TS5500_DIO_IN_OUT(vaddr, vbitfrom + 3, caddr, cbit)
+
+/*
+ * TS-5500 DIO1 block
+ *
+ *  value    control  dir    hw
+ *  addr bit addr bit in out irq name     pin offset
+ *
+ *  0x7b  0  0x7a  0  x   x      DIO1_0   1   0
+ *  0x7b  1  0x7a  0  x   x      DIO1_1   3   1
+ *  0x7b  2  0x7a  0  x   x      DIO1_2   5   2
+ *  0x7b  3  0x7a  0  x   x      DIO1_3   7   3
+ *  0x7b  4  0x7a  1  x   x      DIO1_4   9   4
+ *  0x7b  5  0x7a  1  x   x      DIO1_5   11  5
+ *  0x7b  6  0x7a  1  x   x      DIO1_6   13  6
+ *  0x7b  7  0x7a  1  x   x      DIO1_7   15  7
+ *  0x7c  0  0x7a  5  x   x      DIO1_8   4   8
+ *  0x7c  1  0x7a  5  x   x      DIO1_9   6   9
+ *  0x7c  2  0x7a  5  x   x      DIO1_10  8   10
+ *  0x7c  3  0x7a  5  x   x      DIO1_11  10  11
+ *  0x7c  4           x          DIO1_12  12  12
+ *  0x7c  5           x      7   DIO1_13  14  13
+ */
+static const struct ts5500_dio ts5500_dio1[] = {
+	TS5500_DIO_GROUP(0x7b, 0, 0x7a, 0),
+	TS5500_DIO_GROUP(0x7b, 4, 0x7a, 1),
+	TS5500_DIO_GROUP(0x7c, 0, 0x7a, 5),
+	TS5500_DIO_IN(0x7c, 4),
+	TS5500_DIO_IN_IRQ(0x7c, 5, 7),
+};
+
+/*
+ * TS-5500 DIO2 block
+ *
+ *  value    control  dir    hw
+ *  addr bit addr bit in out irq name     pin offset
+ *
+ *  0x7e  0  0x7d  0  x   x      DIO2_0   1   0
+ *  0x7e  1  0x7d  0  x   x      DIO2_1   3   1
+ *  0x7e  2  0x7d  0  x   x      DIO2_2   5   2
+ *  0x7e  3  0x7d  0  x   x      DIO2_3   7   3
+ *  0x7e  4  0x7d  1  x   x      DIO2_4   9   4
+ *  0x7e  5  0x7d  1  x   x      DIO2_5   11  5
+ *  0x7e  6  0x7d  1  x   x      DIO2_6   13  6
+ *  0x7e  7  0x7d  1  x   x      DIO2_7   15  7
+ *  0x7f  0  0x7d  5  x   x      DIO2_8   4   8
+ *  0x7f  1  0x7d  5  x   x      DIO2_9   6   9
+ *  0x7f  2  0x7d  5  x   x      DIO2_10  8   10
+ *  0x7f  3  0x7d  5  x   x      DIO2_11  10  11
+ *  0x7f  4           x      6   DIO2_13  14  12
+ */
+static const struct ts5500_dio ts5500_dio2[] = {
+	TS5500_DIO_GROUP(0x7e, 0, 0x7d, 0),
+	TS5500_DIO_GROUP(0x7e, 4, 0x7d, 1),
+	TS5500_DIO_GROUP(0x7f, 0, 0x7d, 5),
+	TS5500_DIO_IN_IRQ(0x7f, 4, 6),
+};
+
+/*
+ * TS-5500 LCD port used as DIO block
+ * TS-5600 LCD port is identical
+ *
+ *  value    control  dir    hw
+ *  addr bit addr bit in out irq name    pin offset
+ *
+ *  0x72  0  0x7d  2  x   x      LCD_0   8   0
+ *  0x72  1  0x7d  2  x   x      LCD_1   7   1
+ *  0x72  2  0x7d  2  x   x      LCD_2   10  2
+ *  0x72  3  0x7d  2  x   x      LCD_3   9   3
+ *  0x72  4  0x7d  3  x   x      LCD_4   12  4
+ *  0x72  5  0x7d  3  x   x      LCD_5   11  5
+ *  0x72  6  0x7d  3  x   x      LCD_6   14  6
+ *  0x72  7  0x7d  3  x   x      LCD_7   13  7
+ *  0x73  0               x      LCD_EN  5   8
+ *  0x73  6           x          LCD_WR  6   9
+ *  0x73  7           x      1   LCD_RS  3   10
+ */
+static const struct ts5500_dio ts5500_lcd[] = {
+	TS5500_DIO_GROUP(0x72, 0, 0x7d, 2),
+	TS5500_DIO_GROUP(0x72, 4, 0x7d, 3),
+	TS5500_DIO_OUT(0x73, 0),
+	TS5500_DIO_IN(0x73, 6),
+	TS5500_DIO_IN_IRQ(0x73, 7, 1),
+};
+
+static inline void ts5500_set_mask(u8 mask, u8 addr)
+{
+	u8 val = inb(addr);
+	val |= mask;
+	outb(val, addr);
+}
+
+static inline void ts5500_clear_mask(u8 mask, u8 addr)
+{
+	u8 val = inb(addr);
+	val &= ~mask;
+	outb(val, addr);
+}
+
+static int ts5500_gpio_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct ts5500_priv *priv = gpiochip_get_data(chip);
+	const struct ts5500_dio line = priv->pinout[offset];
+	unsigned long flags;
+
+	if (line.no_input)
+		return -ENXIO;
+
+	if (line.no_output)
+		return 0;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	ts5500_clear_mask(line.control_mask, line.control_addr);
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	return 0;
+}
+
+static int ts5500_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct ts5500_priv *priv = gpiochip_get_data(chip);
+	const struct ts5500_dio line = priv->pinout[offset];
+
+	return !!(inb(line.value_addr) & line.value_mask);
+}
+
+static int ts5500_gpio_output(struct gpio_chip *chip, unsigned offset, int val)
+{
+	struct ts5500_priv *priv = gpiochip_get_data(chip);
+	const struct ts5500_dio line = priv->pinout[offset];
+	unsigned long flags;
+
+	if (line.no_output)
+		return -ENXIO;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (!line.no_input)
+		ts5500_set_mask(line.control_mask, line.control_addr);
+
+	if (val)
+		ts5500_set_mask(line.value_mask, line.value_addr);
+	else
+		ts5500_clear_mask(line.value_mask, line.value_addr);
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	return 0;
+}
+
+static void ts5500_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
+{
+	struct ts5500_priv *priv = gpiochip_get_data(chip);
+	const struct ts5500_dio line = priv->pinout[offset];
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (val)
+		ts5500_set_mask(line.value_mask, line.value_addr);
+	else
+		ts5500_clear_mask(line.value_mask, line.value_addr);
+	spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static int ts5500_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	struct ts5500_priv *priv = gpiochip_get_data(chip);
+	const struct ts5500_dio *block = priv->pinout;
+	const struct ts5500_dio line = block[offset];
+
+	/* Only one pin is connected to an interrupt */
+	if (line.irq)
+		return line.irq;
+
+	/* As this pin is input-only, we may strap it to another in/out pin */
+	if (priv->strap)
+		return priv->hwirq;
+
+	return -ENXIO;
+}
+
+static int ts5500_enable_irq(struct ts5500_priv *priv)
+{
+	int ret = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (priv->hwirq == 7)
+		ts5500_set_mask(BIT(7), 0x7a); /* DIO1_13 on IRQ7 */
+	else if (priv->hwirq == 6)
+		ts5500_set_mask(BIT(7), 0x7d); /* DIO2_13 on IRQ6 */
+	else if (priv->hwirq == 1)
+		ts5500_set_mask(BIT(6), 0x7d); /* LCD_RS on IRQ1 */
+	else
+		ret = -EINVAL;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	return ret;
+}
+
+static void ts5500_disable_irq(struct ts5500_priv *priv)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (priv->hwirq == 7)
+		ts5500_clear_mask(BIT(7), 0x7a); /* DIO1_13 on IRQ7 */
+	else if (priv->hwirq == 6)
+		ts5500_clear_mask(BIT(7), 0x7d); /* DIO2_13 on IRQ6 */
+	else if (priv->hwirq == 1)
+		ts5500_clear_mask(BIT(6), 0x7d); /* LCD_RS on IRQ1 */
+	else
+		dev_err(priv->gpio_chip.parent, "invalid hwirq %d\n",
+			priv->hwirq);
+	spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static int ts5500_dio_probe(struct platform_device *pdev)
+{
+	enum ts5500_blocks block = platform_get_device_id(pdev)->driver_data;
+	struct device *dev = &pdev->dev;
+	const char *name = dev_name(dev);
+	struct ts5500_priv *priv;
+	struct resource *res;
+	unsigned long flags;
+	int ret;
+
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!res) {
+		dev_err(dev, "missing IRQ resource\n");
+		return -EINVAL;
+	}
+
+	priv = devm_kzalloc(dev, sizeof(struct ts5500_priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, priv);
+	priv->hwirq = res->start;
+	spin_lock_init(&priv->lock);
+
+	priv->gpio_chip.owner = THIS_MODULE;
+	priv->gpio_chip.label = name;
+	priv->gpio_chip.parent = dev;
+	priv->gpio_chip.direction_input = ts5500_gpio_input;
+	priv->gpio_chip.direction_output = ts5500_gpio_output;
+	priv->gpio_chip.get = ts5500_gpio_get;
+	priv->gpio_chip.set = ts5500_gpio_set;
+	priv->gpio_chip.to_irq = ts5500_gpio_to_irq;
+	priv->gpio_chip.base = -1;
+
+	switch (block) {
+	case TS5500_DIO1:
+		priv->pinout = ts5500_dio1;
+		priv->gpio_chip.ngpio = ARRAY_SIZE(ts5500_dio1);
+
+		if (!devm_request_region(dev, 0x7a, 3, name)) {
+			dev_err(dev, "failed to request %s ports\n", name);
+			return -EBUSY;
+		}
+		break;
+	case TS5500_DIO2:
+		priv->pinout = ts5500_dio2;
+		priv->gpio_chip.ngpio = ARRAY_SIZE(ts5500_dio2);
+
+		if (!devm_request_region(dev, 0x7e, 2, name)) {
+			dev_err(dev, "failed to request %s ports\n", name);
+			return -EBUSY;
+		}
+
+		if (hex7d_reserved)
+			break;
+
+		if (!devm_request_region(dev, 0x7d, 1, name)) {
+			dev_err(dev, "failed to request %s 7D\n", name);
+			return -EBUSY;
+		}
+
+		hex7d_reserved = true;
+		break;
+	case TS5500_LCD:
+	case TS5600_LCD:
+		priv->pinout = ts5500_lcd;
+		priv->gpio_chip.ngpio = ARRAY_SIZE(ts5500_lcd);
+
+		if (!devm_request_region(dev, 0x72, 2, name)) {
+			dev_err(dev, "failed to request %s ports\n", name);
+			return -EBUSY;
+		}
+
+		if (!hex7d_reserved) {
+			if (!devm_request_region(dev, 0x7d, 1, name)) {
+				dev_err(dev, "failed to request %s 7D\n", name);
+				return -EBUSY;
+			}
+
+			hex7d_reserved = true;
+		}
+
+		/* Ensure usage of LCD port as DIO */
+		spin_lock_irqsave(&priv->lock, flags);
+		ts5500_clear_mask(BIT(4), 0x7d);
+		spin_unlock_irqrestore(&priv->lock, flags);
+		break;
+	}
+
+	ret = devm_gpiochip_add_data(dev, &priv->gpio_chip, priv);
+	if (ret) {
+		dev_err(dev, "failed to register the gpio chip\n");
+		return ret;
+	}
+
+	ret = ts5500_enable_irq(priv);
+	if (ret) {
+		dev_err(dev, "invalid interrupt %d\n", priv->hwirq);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int ts5500_dio_remove(struct platform_device *pdev)
+{
+	struct ts5500_priv *priv = platform_get_drvdata(pdev);
+
+	ts5500_disable_irq(priv);
+
+	return 0;
+}
+
+static const struct platform_device_id ts5500_dio_ids[] = {
+	{ "ts5500-dio1", TS5500_DIO1 },
+	{ "ts5500-dio2", TS5500_DIO2 },
+	{ "ts5500-dio-lcd", TS5500_LCD },
+	{ "ts5600-dio-lcd", TS5600_LCD },
+	{ }
+};
+MODULE_DEVICE_TABLE(platform, ts5500_dio_ids);
+
+static struct platform_driver ts5500_dio_driver = {
+	.driver = {
+		.name = "ts5500-dio",
+	},
+	.probe = ts5500_dio_probe,
+	.remove = ts5500_dio_remove,
+	.id_table = ts5500_dio_ids,
+};
+
+module_platform_driver(ts5500_dio_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Savoir-faire Linux Inc. <kernel@savoirfairelinux.com>");
+MODULE_DESCRIPTION("Technologic Systems TS-5500 Digital I/O driver");
diff --git a/drivers/gpio/gpio-twl4030.c b/drivers/gpio/gpio-twl4030.c
new file mode 100644
index 000000000..de2497262
--- /dev/null
+++ b/drivers/gpio/gpio-twl4030.c
@@ -0,0 +1,651 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Access to GPIOs on TWL4030/TPS659x0 chips
+ *
+ * Copyright (C) 2006-2007 Texas Instruments, Inc.
+ * Copyright (C) 2006 MontaVista Software, Inc.
+ *
+ * Code re-arranged and cleaned up by:
+ *	Syed Mohammed Khasim <x0khasim@ti.com>
+ *
+ * Initial Code:
+ *	Andy Lowe / Nishanth Menon
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kthread.h>
+#include <linux/irq.h>
+#include <linux/gpio/driver.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/irqdomain.h>
+
+#include <linux/mfd/twl.h>
+
+/*
+ * The GPIO "subchip" supports 18 GPIOs which can be configured as
+ * inputs or outputs, with pullups or pulldowns on each pin.  Each
+ * GPIO can trigger interrupts on either or both edges.
+ *
+ * GPIO interrupts can be fed to either of two IRQ lines; this is
+ * intended to support multiple hosts.
+ *
+ * There are also two LED pins used sometimes as output-only GPIOs.
+ */
+
+/* genirq interfaces are not available to modules */
+#ifdef MODULE
+#define is_module()	true
+#else
+#define is_module()	false
+#endif
+
+/* GPIO_CTRL Fields */
+#define MASK_GPIO_CTRL_GPIO0CD1		BIT(0)
+#define MASK_GPIO_CTRL_GPIO1CD2		BIT(1)
+#define MASK_GPIO_CTRL_GPIO_ON		BIT(2)
+
+/* Mask for GPIO registers when aggregated into a 32-bit integer */
+#define GPIO_32_MASK			0x0003ffff
+
+struct gpio_twl4030_priv {
+	struct gpio_chip gpio_chip;
+	struct mutex mutex;
+	int irq_base;
+
+	/* Bitfields for state caching */
+	unsigned int usage_count;
+	unsigned int direction;
+	unsigned int out_state;
+};
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * To configure TWL4030 GPIO module registers
+ */
+static inline int gpio_twl4030_write(u8 address, u8 data)
+{
+	return twl_i2c_write_u8(TWL4030_MODULE_GPIO, data, address);
+}
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * LED register offsets from TWL_MODULE_LED base
+ * PWMs A and B are dedicated to LEDs A and B, respectively.
+ */
+
+#define TWL4030_LED_LEDEN_REG	0x00
+#define TWL4030_PWMAON_REG	0x01
+#define TWL4030_PWMAOFF_REG	0x02
+#define TWL4030_PWMBON_REG	0x03
+#define TWL4030_PWMBOFF_REG	0x04
+
+/* LEDEN bits */
+#define LEDEN_LEDAON		BIT(0)
+#define LEDEN_LEDBON		BIT(1)
+#define LEDEN_LEDAEXT		BIT(2)
+#define LEDEN_LEDBEXT		BIT(3)
+#define LEDEN_LEDAPWM		BIT(4)
+#define LEDEN_LEDBPWM		BIT(5)
+#define LEDEN_PWM_LENGTHA	BIT(6)
+#define LEDEN_PWM_LENGTHB	BIT(7)
+
+#define PWMxON_LENGTH		BIT(7)
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * To read a TWL4030 GPIO module register
+ */
+static inline int gpio_twl4030_read(u8 address)
+{
+	u8 data;
+	int ret = 0;
+
+	ret = twl_i2c_read_u8(TWL4030_MODULE_GPIO, &data, address);
+	return (ret < 0) ? ret : data;
+}
+
+/*----------------------------------------------------------------------*/
+
+static u8 cached_leden;
+
+/* The LED lines are open drain outputs ... a FET pulls to GND, so an
+ * external pullup is needed.  We could also expose the integrated PWM
+ * as a LED brightness control; we initialize it as "always on".
+ */
+static void twl4030_led_set_value(int led, int value)
+{
+	u8 mask = LEDEN_LEDAON | LEDEN_LEDAPWM;
+
+	if (led)
+		mask <<= 1;
+
+	if (value)
+		cached_leden &= ~mask;
+	else
+		cached_leden |= mask;
+
+	WARN_ON_ONCE(twl_i2c_write_u8(TWL4030_MODULE_LED, cached_leden,
+				      TWL4030_LED_LEDEN_REG));
+}
+
+static int twl4030_set_gpio_direction(int gpio, int is_input)
+{
+	u8 d_bnk = gpio >> 3;
+	u8 d_msk = BIT(gpio & 0x7);
+	u8 reg = 0;
+	u8 base = REG_GPIODATADIR1 + d_bnk;
+	int ret = 0;
+
+	ret = gpio_twl4030_read(base);
+	if (ret >= 0) {
+		if (is_input)
+			reg = ret & ~d_msk;
+		else
+			reg = ret | d_msk;
+
+		ret = gpio_twl4030_write(base, reg);
+	}
+	return ret;
+}
+
+static int twl4030_get_gpio_direction(int gpio)
+{
+	u8 d_bnk = gpio >> 3;
+	u8 d_msk = BIT(gpio & 0x7);
+	u8 base = REG_GPIODATADIR1 + d_bnk;
+	int ret = 0;
+
+	ret = gpio_twl4030_read(base);
+	if (ret < 0)
+		return ret;
+
+	if (ret & d_msk)
+		return GPIO_LINE_DIRECTION_OUT;
+
+	return GPIO_LINE_DIRECTION_IN;
+}
+
+static int twl4030_set_gpio_dataout(int gpio, int enable)
+{
+	u8 d_bnk = gpio >> 3;
+	u8 d_msk = BIT(gpio & 0x7);
+	u8 base = 0;
+
+	if (enable)
+		base = REG_SETGPIODATAOUT1 + d_bnk;
+	else
+		base = REG_CLEARGPIODATAOUT1 + d_bnk;
+
+	return gpio_twl4030_write(base, d_msk);
+}
+
+static int twl4030_get_gpio_datain(int gpio)
+{
+	u8 d_bnk = gpio >> 3;
+	u8 d_off = gpio & 0x7;
+	u8 base = 0;
+	int ret = 0;
+
+	base = REG_GPIODATAIN1 + d_bnk;
+	ret = gpio_twl4030_read(base);
+	if (ret > 0)
+		ret = (ret >> d_off) & 0x1;
+
+	return ret;
+}
+
+/*----------------------------------------------------------------------*/
+
+static int twl_request(struct gpio_chip *chip, unsigned offset)
+{
+	struct gpio_twl4030_priv *priv = gpiochip_get_data(chip);
+	int status = 0;
+
+	mutex_lock(&priv->mutex);
+
+	/* Support the two LED outputs as output-only GPIOs. */
+	if (offset >= TWL4030_GPIO_MAX) {
+		u8	ledclr_mask = LEDEN_LEDAON | LEDEN_LEDAEXT
+				| LEDEN_LEDAPWM | LEDEN_PWM_LENGTHA;
+		u8	reg = TWL4030_PWMAON_REG;
+
+		offset -= TWL4030_GPIO_MAX;
+		if (offset) {
+			ledclr_mask <<= 1;
+			reg = TWL4030_PWMBON_REG;
+		}
+
+		/* initialize PWM to always-drive */
+		/* Configure PWM OFF register first */
+		status = twl_i2c_write_u8(TWL4030_MODULE_LED, 0x7f, reg + 1);
+		if (status < 0)
+			goto done;
+
+		/* Followed by PWM ON register */
+		status = twl_i2c_write_u8(TWL4030_MODULE_LED, 0x7f, reg);
+		if (status < 0)
+			goto done;
+
+		/* init LED to not-driven (high) */
+		status = twl_i2c_read_u8(TWL4030_MODULE_LED, &cached_leden,
+					 TWL4030_LED_LEDEN_REG);
+		if (status < 0)
+			goto done;
+		cached_leden &= ~ledclr_mask;
+		status = twl_i2c_write_u8(TWL4030_MODULE_LED, cached_leden,
+					  TWL4030_LED_LEDEN_REG);
+		if (status < 0)
+			goto done;
+
+		status = 0;
+		goto done;
+	}
+
+	/* on first use, turn GPIO module "on" */
+	if (!priv->usage_count) {
+		struct twl4030_gpio_platform_data *pdata;
+		u8 value = MASK_GPIO_CTRL_GPIO_ON;
+
+		/* optionally have the first two GPIOs switch vMMC1
+		 * and vMMC2 power supplies based on card presence.
+		 */
+		pdata = dev_get_platdata(chip->parent);
+		if (pdata)
+			value |= pdata->mmc_cd & 0x03;
+
+		status = gpio_twl4030_write(REG_GPIO_CTRL, value);
+	}
+
+done:
+	if (!status)
+		priv->usage_count |= BIT(offset);
+
+	mutex_unlock(&priv->mutex);
+	return status;
+}
+
+static void twl_free(struct gpio_chip *chip, unsigned offset)
+{
+	struct gpio_twl4030_priv *priv = gpiochip_get_data(chip);
+
+	mutex_lock(&priv->mutex);
+	if (offset >= TWL4030_GPIO_MAX) {
+		twl4030_led_set_value(offset - TWL4030_GPIO_MAX, 1);
+		goto out;
+	}
+
+	priv->usage_count &= ~BIT(offset);
+
+	/* on last use, switch off GPIO module */
+	if (!priv->usage_count)
+		gpio_twl4030_write(REG_GPIO_CTRL, 0x0);
+
+out:
+	mutex_unlock(&priv->mutex);
+}
+
+static int twl_direction_in(struct gpio_chip *chip, unsigned offset)
+{
+	struct gpio_twl4030_priv *priv = gpiochip_get_data(chip);
+	int ret;
+
+	mutex_lock(&priv->mutex);
+	if (offset < TWL4030_GPIO_MAX)
+		ret = twl4030_set_gpio_direction(offset, 1);
+	else
+		ret = -EINVAL;	/* LED outputs can't be set as input */
+
+	if (!ret)
+		priv->direction &= ~BIT(offset);
+
+	mutex_unlock(&priv->mutex);
+
+	return ret;
+}
+
+static int twl_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct gpio_twl4030_priv *priv = gpiochip_get_data(chip);
+	int ret;
+	int status = 0;
+
+	mutex_lock(&priv->mutex);
+	if (!(priv->usage_count & BIT(offset))) {
+		ret = -EPERM;
+		goto out;
+	}
+
+	if (priv->direction & BIT(offset))
+		status = priv->out_state & BIT(offset);
+	else
+		status = twl4030_get_gpio_datain(offset);
+
+	ret = (status < 0) ? status : !!status;
+out:
+	mutex_unlock(&priv->mutex);
+	return ret;
+}
+
+static void twl_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct gpio_twl4030_priv *priv = gpiochip_get_data(chip);
+
+	mutex_lock(&priv->mutex);
+	if (offset < TWL4030_GPIO_MAX)
+		twl4030_set_gpio_dataout(offset, value);
+	else
+		twl4030_led_set_value(offset - TWL4030_GPIO_MAX, value);
+
+	if (value)
+		priv->out_state |= BIT(offset);
+	else
+		priv->out_state &= ~BIT(offset);
+
+	mutex_unlock(&priv->mutex);
+}
+
+static int twl_direction_out(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct gpio_twl4030_priv *priv = gpiochip_get_data(chip);
+	int ret = 0;
+
+	mutex_lock(&priv->mutex);
+	if (offset < TWL4030_GPIO_MAX) {
+		ret = twl4030_set_gpio_direction(offset, 0);
+		if (ret) {
+			mutex_unlock(&priv->mutex);
+			return ret;
+		}
+	}
+
+	/*
+	 *  LED gpios i.e. offset >= TWL4030_GPIO_MAX are always output
+	 */
+
+	priv->direction |= BIT(offset);
+	mutex_unlock(&priv->mutex);
+
+	twl_set(chip, offset, value);
+
+	return ret;
+}
+
+static int twl_get_direction(struct gpio_chip *chip, unsigned offset)
+{
+	struct gpio_twl4030_priv *priv = gpiochip_get_data(chip);
+	/*
+	 * Default GPIO_LINE_DIRECTION_OUT
+	 * LED GPIOs >= TWL4030_GPIO_MAX are always output
+	 */
+	int ret = GPIO_LINE_DIRECTION_OUT;
+
+	mutex_lock(&priv->mutex);
+	if (offset < TWL4030_GPIO_MAX) {
+		ret = twl4030_get_gpio_direction(offset);
+		if (ret) {
+			mutex_unlock(&priv->mutex);
+			return ret;
+		}
+	}
+	mutex_unlock(&priv->mutex);
+
+	return ret;
+}
+
+static int twl_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	struct gpio_twl4030_priv *priv = gpiochip_get_data(chip);
+
+	return (priv->irq_base && (offset < TWL4030_GPIO_MAX))
+		? (priv->irq_base + offset)
+		: -EINVAL;
+}
+
+static const struct gpio_chip template_chip = {
+	.label			= "twl4030",
+	.owner			= THIS_MODULE,
+	.request		= twl_request,
+	.free			= twl_free,
+	.direction_input	= twl_direction_in,
+	.direction_output	= twl_direction_out,
+	.get_direction		= twl_get_direction,
+	.get			= twl_get,
+	.set			= twl_set,
+	.to_irq			= twl_to_irq,
+	.can_sleep		= true,
+};
+
+/*----------------------------------------------------------------------*/
+
+static int gpio_twl4030_pulls(u32 ups, u32 downs)
+{
+	u8		message[5];
+	unsigned	i, gpio_bit;
+
+	/* For most pins, a pulldown was enabled by default.
+	 * We should have data that's specific to this board.
+	 */
+	for (gpio_bit = 1, i = 0; i < 5; i++) {
+		u8		bit_mask;
+		unsigned	j;
+
+		for (bit_mask = 0, j = 0; j < 8; j += 2, gpio_bit <<= 1) {
+			if (ups & gpio_bit)
+				bit_mask |= 1 << (j + 1);
+			else if (downs & gpio_bit)
+				bit_mask |= 1 << (j + 0);
+		}
+		message[i] = bit_mask;
+	}
+
+	return twl_i2c_write(TWL4030_MODULE_GPIO, message,
+				REG_GPIOPUPDCTR1, 5);
+}
+
+static int gpio_twl4030_debounce(u32 debounce, u8 mmc_cd)
+{
+	u8		message[3];
+
+	/* 30 msec of debouncing is always used for MMC card detect,
+	 * and is optional for everything else.
+	 */
+	message[0] = (debounce & 0xff) | (mmc_cd & 0x03);
+	debounce >>= 8;
+	message[1] = (debounce & 0xff);
+	debounce >>= 8;
+	message[2] = (debounce & 0x03);
+
+	return twl_i2c_write(TWL4030_MODULE_GPIO, message,
+				REG_GPIO_DEBEN1, 3);
+}
+
+static int gpio_twl4030_remove(struct platform_device *pdev);
+
+static struct twl4030_gpio_platform_data *of_gpio_twl4030(struct device *dev,
+				struct twl4030_gpio_platform_data *pdata)
+{
+	struct twl4030_gpio_platform_data *omap_twl_info;
+
+	omap_twl_info = devm_kzalloc(dev, sizeof(*omap_twl_info), GFP_KERNEL);
+	if (!omap_twl_info)
+		return NULL;
+
+	if (pdata)
+		*omap_twl_info = *pdata;
+
+	omap_twl_info->use_leds = of_property_read_bool(dev->of_node,
+			"ti,use-leds");
+
+	of_property_read_u32(dev->of_node, "ti,debounce",
+			     &omap_twl_info->debounce);
+	of_property_read_u32(dev->of_node, "ti,mmc-cd",
+			     (u32 *)&omap_twl_info->mmc_cd);
+	of_property_read_u32(dev->of_node, "ti,pullups",
+			     &omap_twl_info->pullups);
+	of_property_read_u32(dev->of_node, "ti,pulldowns",
+			     &omap_twl_info->pulldowns);
+
+	return omap_twl_info;
+}
+
+static int gpio_twl4030_probe(struct platform_device *pdev)
+{
+	struct twl4030_gpio_platform_data *pdata = dev_get_platdata(&pdev->dev);
+	struct device_node *node = pdev->dev.of_node;
+	struct gpio_twl4030_priv *priv;
+	int ret, irq_base;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(struct gpio_twl4030_priv),
+			    GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	/* maybe setup IRQs */
+	if (is_module()) {
+		dev_err(&pdev->dev, "can't dispatch IRQs from modules\n");
+		goto no_irqs;
+	}
+
+	irq_base = devm_irq_alloc_descs(&pdev->dev, -1,
+					0, TWL4030_GPIO_MAX, 0);
+	if (irq_base < 0) {
+		dev_err(&pdev->dev, "Failed to alloc irq_descs\n");
+		return irq_base;
+	}
+
+	irq_domain_add_legacy(node, TWL4030_GPIO_MAX, irq_base, 0,
+			      &irq_domain_simple_ops, NULL);
+
+	ret = twl4030_sih_setup(&pdev->dev, TWL4030_MODULE_GPIO, irq_base);
+	if (ret < 0)
+		return ret;
+
+	priv->irq_base = irq_base;
+
+no_irqs:
+	priv->gpio_chip = template_chip;
+	priv->gpio_chip.base = -1;
+	priv->gpio_chip.ngpio = TWL4030_GPIO_MAX;
+	priv->gpio_chip.parent = &pdev->dev;
+
+	mutex_init(&priv->mutex);
+
+	if (node)
+		pdata = of_gpio_twl4030(&pdev->dev, pdata);
+
+	if (pdata == NULL) {
+		dev_err(&pdev->dev, "Platform data is missing\n");
+		return -ENXIO;
+	}
+
+	/*
+	 * NOTE:  boards may waste power if they don't set pullups
+	 * and pulldowns correctly ... default for non-ULPI pins is
+	 * pulldown, and some other pins may have external pullups
+	 * or pulldowns.  Careful!
+	 */
+	ret = gpio_twl4030_pulls(pdata->pullups, pdata->pulldowns);
+	if (ret)
+		dev_dbg(&pdev->dev, "pullups %.05x %.05x --> %d\n",
+			pdata->pullups, pdata->pulldowns, ret);
+
+	ret = gpio_twl4030_debounce(pdata->debounce, pdata->mmc_cd);
+	if (ret)
+		dev_dbg(&pdev->dev, "debounce %.03x %.01x --> %d\n",
+			pdata->debounce, pdata->mmc_cd, ret);
+
+	/*
+	 * NOTE: we assume VIBRA_CTL.VIBRA_EN, in MODULE_AUDIO_VOICE,
+	 * is (still) clear if use_leds is set.
+	 */
+	if (pdata->use_leds)
+		priv->gpio_chip.ngpio += 2;
+
+	ret = gpiochip_add_data(&priv->gpio_chip, priv);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "could not register gpiochip, %d\n", ret);
+		priv->gpio_chip.ngpio = 0;
+		gpio_twl4030_remove(pdev);
+		goto out;
+	}
+
+	platform_set_drvdata(pdev, priv);
+
+	if (pdata->setup) {
+		int status;
+
+		status = pdata->setup(&pdev->dev, priv->gpio_chip.base,
+				      TWL4030_GPIO_MAX);
+		if (status)
+			dev_dbg(&pdev->dev, "setup --> %d\n", status);
+	}
+
+out:
+	return ret;
+}
+
+/* Cannot use as gpio_twl4030_probe() calls us */
+static int gpio_twl4030_remove(struct platform_device *pdev)
+{
+	struct twl4030_gpio_platform_data *pdata = dev_get_platdata(&pdev->dev);
+	struct gpio_twl4030_priv *priv = platform_get_drvdata(pdev);
+	int status;
+
+	if (pdata && pdata->teardown) {
+		status = pdata->teardown(&pdev->dev, priv->gpio_chip.base,
+					 TWL4030_GPIO_MAX);
+		if (status) {
+			dev_dbg(&pdev->dev, "teardown --> %d\n", status);
+			return status;
+		}
+	}
+
+	gpiochip_remove(&priv->gpio_chip);
+
+	if (is_module())
+		return 0;
+
+	/* REVISIT no support yet for deregistering all the IRQs */
+	WARN_ON(1);
+	return -EIO;
+}
+
+static const struct of_device_id twl_gpio_match[] = {
+	{ .compatible = "ti,twl4030-gpio", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, twl_gpio_match);
+
+/* Note:  this hardware lives inside an I2C-based multi-function device. */
+MODULE_ALIAS("platform:twl4030_gpio");
+
+static struct platform_driver gpio_twl4030_driver = {
+	.driver = {
+		.name	= "twl4030_gpio",
+		.of_match_table = twl_gpio_match,
+	},
+	.probe		= gpio_twl4030_probe,
+	.remove		= gpio_twl4030_remove,
+};
+
+static int __init gpio_twl4030_init(void)
+{
+	return platform_driver_register(&gpio_twl4030_driver);
+}
+subsys_initcall(gpio_twl4030_init);
+
+static void __exit gpio_twl4030_exit(void)
+{
+	platform_driver_unregister(&gpio_twl4030_driver);
+}
+module_exit(gpio_twl4030_exit);
+
+MODULE_AUTHOR("Texas Instruments, Inc.");
+MODULE_DESCRIPTION("GPIO interface for TWL4030");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/gpio-twl6040.c b/drivers/gpio/gpio-twl6040.c
new file mode 100644
index 000000000..648fb418d
--- /dev/null
+++ b/drivers/gpio/gpio-twl6040.c
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Access to GPOs on TWL6040 chip
+ *
+ * Copyright (C) 2012 Texas Instruments, Inc.
+ *
+ * Authors:
+ *	Sergio Aguirre <saaguirre@ti.com>
+ *	Peter Ujfalusi <peter.ujfalusi@ti.com>
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kthread.h>
+#include <linux/irq.h>
+#include <linux/gpio/driver.h>
+#include <linux/platform_device.h>
+#include <linux/bitops.h>
+#include <linux/of.h>
+
+#include <linux/mfd/twl6040.h>
+
+static int twl6040gpo_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct twl6040 *twl6040 = dev_get_drvdata(chip->parent->parent);
+	int ret = 0;
+
+	ret = twl6040_reg_read(twl6040, TWL6040_REG_GPOCTL);
+	if (ret < 0)
+		return ret;
+
+	return !!(ret & BIT(offset));
+}
+
+static int twl6040gpo_get_direction(struct gpio_chip *chip, unsigned offset)
+{
+	return GPIO_LINE_DIRECTION_OUT;
+}
+
+static int twl6040gpo_direction_out(struct gpio_chip *chip, unsigned offset,
+				    int value)
+{
+	/* This only drives GPOs, and can't change direction */
+	return 0;
+}
+
+static void twl6040gpo_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct twl6040 *twl6040 = dev_get_drvdata(chip->parent->parent);
+	int ret;
+	u8 gpoctl;
+
+	ret = twl6040_reg_read(twl6040, TWL6040_REG_GPOCTL);
+	if (ret < 0)
+		return;
+
+	if (value)
+		gpoctl = ret | BIT(offset);
+	else
+		gpoctl = ret & ~BIT(offset);
+
+	twl6040_reg_write(twl6040, TWL6040_REG_GPOCTL, gpoctl);
+}
+
+static struct gpio_chip twl6040gpo_chip = {
+	.label			= "twl6040",
+	.owner			= THIS_MODULE,
+	.get			= twl6040gpo_get,
+	.direction_output	= twl6040gpo_direction_out,
+	.get_direction		= twl6040gpo_get_direction,
+	.set			= twl6040gpo_set,
+	.can_sleep		= true,
+};
+
+/*----------------------------------------------------------------------*/
+
+static int gpo_twl6040_probe(struct platform_device *pdev)
+{
+	struct device *twl6040_core_dev = pdev->dev.parent;
+	struct twl6040 *twl6040 = dev_get_drvdata(twl6040_core_dev);
+	int ret;
+
+	twl6040gpo_chip.base = -1;
+
+	if (twl6040_get_revid(twl6040) < TWL6041_REV_ES2_0)
+		twl6040gpo_chip.ngpio = 3; /* twl6040 have 3 GPO */
+	else
+		twl6040gpo_chip.ngpio = 1; /* twl6041 have 1 GPO */
+
+	twl6040gpo_chip.parent = &pdev->dev;
+#ifdef CONFIG_OF_GPIO
+	twl6040gpo_chip.of_node = twl6040_core_dev->of_node;
+#endif
+
+	ret = devm_gpiochip_add_data(&pdev->dev, &twl6040gpo_chip, NULL);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "could not register gpiochip, %d\n", ret);
+		twl6040gpo_chip.ngpio = 0;
+	}
+
+	return ret;
+}
+
+/* Note:  this hardware lives inside an I2C-based multi-function device. */
+MODULE_ALIAS("platform:twl6040-gpo");
+
+static struct platform_driver gpo_twl6040_driver = {
+	.driver = {
+		.name	= "twl6040-gpo",
+	},
+	.probe		= gpo_twl6040_probe,
+};
+
+module_platform_driver(gpo_twl6040_driver);
+
+MODULE_AUTHOR("Texas Instruments, Inc.");
+MODULE_DESCRIPTION("GPO interface for TWL6040");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/gpio-ucb1400.c b/drivers/gpio/gpio-ucb1400.c
new file mode 100644
index 000000000..d2a864486
--- /dev/null
+++ b/drivers/gpio/gpio-ucb1400.c
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Philips UCB1400 GPIO driver
+ *
+ * Author: Marek Vasut <marek.vasut@gmail.com>
+ */
+
+#include <linux/module.h>
+#include <linux/ucb1400.h>
+
+static int ucb1400_gpio_dir_in(struct gpio_chip *gc, unsigned off)
+{
+	struct ucb1400_gpio *gpio;
+	gpio = gpiochip_get_data(gc);
+	ucb1400_gpio_set_direction(gpio->ac97, off, 0);
+	return 0;
+}
+
+static int ucb1400_gpio_dir_out(struct gpio_chip *gc, unsigned off, int val)
+{
+	struct ucb1400_gpio *gpio;
+	gpio = gpiochip_get_data(gc);
+	ucb1400_gpio_set_direction(gpio->ac97, off, 1);
+	ucb1400_gpio_set_value(gpio->ac97, off, val);
+	return 0;
+}
+
+static int ucb1400_gpio_get(struct gpio_chip *gc, unsigned off)
+{
+	struct ucb1400_gpio *gpio;
+
+	gpio = gpiochip_get_data(gc);
+	return !!ucb1400_gpio_get_value(gpio->ac97, off);
+}
+
+static void ucb1400_gpio_set(struct gpio_chip *gc, unsigned off, int val)
+{
+	struct ucb1400_gpio *gpio;
+	gpio = gpiochip_get_data(gc);
+	ucb1400_gpio_set_value(gpio->ac97, off, val);
+}
+
+static int ucb1400_gpio_probe(struct platform_device *dev)
+{
+	struct ucb1400_gpio *ucb = dev_get_platdata(&dev->dev);
+	int err = 0;
+
+	if (!(ucb && ucb->gpio_offset)) {
+		err = -EINVAL;
+		goto err;
+	}
+
+	platform_set_drvdata(dev, ucb);
+
+	ucb->gc.label = "ucb1400_gpio";
+	ucb->gc.base = ucb->gpio_offset;
+	ucb->gc.ngpio = 10;
+	ucb->gc.owner = THIS_MODULE;
+
+	ucb->gc.direction_input = ucb1400_gpio_dir_in;
+	ucb->gc.direction_output = ucb1400_gpio_dir_out;
+	ucb->gc.get = ucb1400_gpio_get;
+	ucb->gc.set = ucb1400_gpio_set;
+	ucb->gc.can_sleep = true;
+
+	err = devm_gpiochip_add_data(&dev->dev, &ucb->gc, ucb);
+	if (err)
+		goto err;
+
+	if (ucb->gpio_setup)
+		err = ucb->gpio_setup(&dev->dev, ucb->gc.ngpio);
+
+err:
+	return err;
+
+}
+
+static int ucb1400_gpio_remove(struct platform_device *dev)
+{
+	int err = 0;
+	struct ucb1400_gpio *ucb = platform_get_drvdata(dev);
+
+	if (ucb && ucb->gpio_teardown) {
+		err = ucb->gpio_teardown(&dev->dev, ucb->gc.ngpio);
+		if (err)
+			return err;
+	}
+
+	return err;
+}
+
+static struct platform_driver ucb1400_gpio_driver = {
+	.probe	= ucb1400_gpio_probe,
+	.remove	= ucb1400_gpio_remove,
+	.driver	= {
+		.name	= "ucb1400_gpio"
+	},
+};
+
+module_platform_driver(ucb1400_gpio_driver);
+
+MODULE_DESCRIPTION("Philips UCB1400 GPIO driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ucb1400_gpio");
diff --git a/drivers/gpio/gpio-uniphier.c b/drivers/gpio/gpio-uniphier.c
new file mode 100644
index 000000000..39dca147d
--- /dev/null
+++ b/drivers/gpio/gpio-uniphier.c
@@ -0,0 +1,495 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2017 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+
+#include <linux/bits.h>
+#include <linux/gpio/driver.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <dt-bindings/gpio/uniphier-gpio.h>
+
+#define UNIPHIER_GPIO_IRQ_MAX_NUM	24
+
+#define UNIPHIER_GPIO_PORT_DATA		0x0	/* data */
+#define UNIPHIER_GPIO_PORT_DIR		0x4	/* direction (1:in, 0:out) */
+#define UNIPHIER_GPIO_IRQ_EN		0x90	/* irq enable */
+#define UNIPHIER_GPIO_IRQ_MODE		0x94	/* irq mode (1: both edge) */
+#define UNIPHIER_GPIO_IRQ_FLT_EN	0x98	/* noise filter enable */
+#define UNIPHIER_GPIO_IRQ_FLT_CYC	0x9c	/* noise filter clock cycle */
+
+struct uniphier_gpio_priv {
+	struct gpio_chip chip;
+	struct irq_chip irq_chip;
+	struct irq_domain *domain;
+	void __iomem *regs;
+	spinlock_t lock;
+	u32 saved_vals[];
+};
+
+static unsigned int uniphier_gpio_bank_to_reg(unsigned int bank)
+{
+	unsigned int reg;
+
+	reg = (bank + 1) * 8;
+
+	/*
+	 * Unfortunately, the GPIO port registers are not contiguous because
+	 * offset 0x90-0x9f is used for IRQ.  Add 0x10 when crossing the region.
+	 */
+	if (reg >= UNIPHIER_GPIO_IRQ_EN)
+		reg += 0x10;
+
+	return reg;
+}
+
+static void uniphier_gpio_get_bank_and_mask(unsigned int offset,
+					    unsigned int *bank, u32 *mask)
+{
+	*bank = offset / UNIPHIER_GPIO_LINES_PER_BANK;
+	*mask = BIT(offset % UNIPHIER_GPIO_LINES_PER_BANK);
+}
+
+static void uniphier_gpio_reg_update(struct uniphier_gpio_priv *priv,
+				     unsigned int reg, u32 mask, u32 val)
+{
+	unsigned long flags;
+	u32 tmp;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	tmp = readl(priv->regs + reg);
+	tmp &= ~mask;
+	tmp |= mask & val;
+	writel(tmp, priv->regs + reg);
+	spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static void uniphier_gpio_bank_write(struct gpio_chip *chip, unsigned int bank,
+				     unsigned int reg, u32 mask, u32 val)
+{
+	struct uniphier_gpio_priv *priv = gpiochip_get_data(chip);
+
+	if (!mask)
+		return;
+
+	uniphier_gpio_reg_update(priv, uniphier_gpio_bank_to_reg(bank) + reg,
+				 mask, val);
+}
+
+static void uniphier_gpio_offset_write(struct gpio_chip *chip,
+				       unsigned int offset, unsigned int reg,
+				       int val)
+{
+	unsigned int bank;
+	u32 mask;
+
+	uniphier_gpio_get_bank_and_mask(offset, &bank, &mask);
+
+	uniphier_gpio_bank_write(chip, bank, reg, mask, val ? mask : 0);
+}
+
+static int uniphier_gpio_offset_read(struct gpio_chip *chip,
+				     unsigned int offset, unsigned int reg)
+{
+	struct uniphier_gpio_priv *priv = gpiochip_get_data(chip);
+	unsigned int bank, reg_offset;
+	u32 mask;
+
+	uniphier_gpio_get_bank_and_mask(offset, &bank, &mask);
+	reg_offset = uniphier_gpio_bank_to_reg(bank) + reg;
+
+	return !!(readl(priv->regs + reg_offset) & mask);
+}
+
+static int uniphier_gpio_get_direction(struct gpio_chip *chip,
+				       unsigned int offset)
+{
+	if (uniphier_gpio_offset_read(chip, offset, UNIPHIER_GPIO_PORT_DIR))
+		return GPIO_LINE_DIRECTION_IN;
+
+	return GPIO_LINE_DIRECTION_OUT;
+}
+
+static int uniphier_gpio_direction_input(struct gpio_chip *chip,
+					 unsigned int offset)
+{
+	uniphier_gpio_offset_write(chip, offset, UNIPHIER_GPIO_PORT_DIR, 1);
+
+	return 0;
+}
+
+static int uniphier_gpio_direction_output(struct gpio_chip *chip,
+					  unsigned int offset, int val)
+{
+	uniphier_gpio_offset_write(chip, offset, UNIPHIER_GPIO_PORT_DATA, val);
+	uniphier_gpio_offset_write(chip, offset, UNIPHIER_GPIO_PORT_DIR, 0);
+
+	return 0;
+}
+
+static int uniphier_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+	return uniphier_gpio_offset_read(chip, offset, UNIPHIER_GPIO_PORT_DATA);
+}
+
+static void uniphier_gpio_set(struct gpio_chip *chip,
+			      unsigned int offset, int val)
+{
+	uniphier_gpio_offset_write(chip, offset, UNIPHIER_GPIO_PORT_DATA, val);
+}
+
+static void uniphier_gpio_set_multiple(struct gpio_chip *chip,
+				       unsigned long *mask, unsigned long *bits)
+{
+	unsigned long i, bank, bank_mask, bank_bits;
+
+	for_each_set_clump8(i, bank_mask, mask, chip->ngpio) {
+		bank = i / UNIPHIER_GPIO_LINES_PER_BANK;
+		bank_bits = bitmap_get_value8(bits, i);
+
+		uniphier_gpio_bank_write(chip, bank, UNIPHIER_GPIO_PORT_DATA,
+					 bank_mask, bank_bits);
+	}
+}
+
+static int uniphier_gpio_to_irq(struct gpio_chip *chip, unsigned int offset)
+{
+	struct irq_fwspec fwspec;
+
+	if (offset < UNIPHIER_GPIO_IRQ_OFFSET)
+		return -ENXIO;
+
+	fwspec.fwnode = of_node_to_fwnode(chip->parent->of_node);
+	fwspec.param_count = 2;
+	fwspec.param[0] = offset - UNIPHIER_GPIO_IRQ_OFFSET;
+	/*
+	 * IRQ_TYPE_NONE is rejected by the parent irq domain. Set LEVEL_HIGH
+	 * temporarily. Anyway, ->irq_set_type() will override it later.
+	 */
+	fwspec.param[1] = IRQ_TYPE_LEVEL_HIGH;
+
+	return irq_create_fwspec_mapping(&fwspec);
+}
+
+static void uniphier_gpio_irq_mask(struct irq_data *data)
+{
+	struct uniphier_gpio_priv *priv = data->chip_data;
+	u32 mask = BIT(data->hwirq);
+
+	uniphier_gpio_reg_update(priv, UNIPHIER_GPIO_IRQ_EN, mask, 0);
+
+	irq_chip_mask_parent(data);
+}
+
+static void uniphier_gpio_irq_unmask(struct irq_data *data)
+{
+	struct uniphier_gpio_priv *priv = data->chip_data;
+	u32 mask = BIT(data->hwirq);
+
+	uniphier_gpio_reg_update(priv, UNIPHIER_GPIO_IRQ_EN, mask, mask);
+
+	irq_chip_unmask_parent(data);
+}
+
+static int uniphier_gpio_irq_set_type(struct irq_data *data, unsigned int type)
+{
+	struct uniphier_gpio_priv *priv = data->chip_data;
+	u32 mask = BIT(data->hwirq);
+	u32 val = 0;
+
+	if (type == IRQ_TYPE_EDGE_BOTH) {
+		val = mask;
+		type = IRQ_TYPE_EDGE_FALLING;
+	}
+
+	uniphier_gpio_reg_update(priv, UNIPHIER_GPIO_IRQ_MODE, mask, val);
+	/* To enable both edge detection, the noise filter must be enabled. */
+	uniphier_gpio_reg_update(priv, UNIPHIER_GPIO_IRQ_FLT_EN, mask, val);
+
+	return irq_chip_set_type_parent(data, type);
+}
+
+static int uniphier_gpio_irq_get_parent_hwirq(struct uniphier_gpio_priv *priv,
+					      unsigned int hwirq)
+{
+	struct device_node *np = priv->chip.parent->of_node;
+	const __be32 *range;
+	u32 base, parent_base, size;
+	int len;
+
+	range = of_get_property(np, "socionext,interrupt-ranges", &len);
+	if (!range)
+		return -EINVAL;
+
+	len /= sizeof(*range);
+
+	for (; len >= 3; len -= 3) {
+		base = be32_to_cpu(*range++);
+		parent_base = be32_to_cpu(*range++);
+		size = be32_to_cpu(*range++);
+
+		if (base <= hwirq && hwirq < base + size)
+			return hwirq - base + parent_base;
+	}
+
+	return -ENOENT;
+}
+
+static int uniphier_gpio_irq_domain_translate(struct irq_domain *domain,
+					      struct irq_fwspec *fwspec,
+					      unsigned long *out_hwirq,
+					      unsigned int *out_type)
+{
+	if (WARN_ON(fwspec->param_count < 2))
+		return -EINVAL;
+
+	*out_hwirq = fwspec->param[0];
+	*out_type = fwspec->param[1] & IRQ_TYPE_SENSE_MASK;
+
+	return 0;
+}
+
+static int uniphier_gpio_irq_domain_alloc(struct irq_domain *domain,
+					  unsigned int virq,
+					  unsigned int nr_irqs, void *arg)
+{
+	struct uniphier_gpio_priv *priv = domain->host_data;
+	struct irq_fwspec parent_fwspec;
+	irq_hw_number_t hwirq;
+	unsigned int type;
+	int ret;
+
+	if (WARN_ON(nr_irqs != 1))
+		return -EINVAL;
+
+	ret = uniphier_gpio_irq_domain_translate(domain, arg, &hwirq, &type);
+	if (ret)
+		return ret;
+
+	ret = uniphier_gpio_irq_get_parent_hwirq(priv, hwirq);
+	if (ret < 0)
+		return ret;
+
+	/* parent is UniPhier AIDET */
+	parent_fwspec.fwnode = domain->parent->fwnode;
+	parent_fwspec.param_count = 2;
+	parent_fwspec.param[0] = ret;
+	parent_fwspec.param[1] = (type == IRQ_TYPE_EDGE_BOTH) ?
+						IRQ_TYPE_EDGE_FALLING : type;
+
+	ret = irq_domain_set_hwirq_and_chip(domain, virq, hwirq,
+					    &priv->irq_chip, priv);
+	if (ret)
+		return ret;
+
+	return irq_domain_alloc_irqs_parent(domain, virq, 1, &parent_fwspec);
+}
+
+static int uniphier_gpio_irq_domain_activate(struct irq_domain *domain,
+					     struct irq_data *data, bool early)
+{
+	struct uniphier_gpio_priv *priv = domain->host_data;
+	struct gpio_chip *chip = &priv->chip;
+
+	return gpiochip_lock_as_irq(chip, data->hwirq + UNIPHIER_GPIO_IRQ_OFFSET);
+}
+
+static void uniphier_gpio_irq_domain_deactivate(struct irq_domain *domain,
+						struct irq_data *data)
+{
+	struct uniphier_gpio_priv *priv = domain->host_data;
+	struct gpio_chip *chip = &priv->chip;
+
+	gpiochip_unlock_as_irq(chip, data->hwirq + UNIPHIER_GPIO_IRQ_OFFSET);
+}
+
+static const struct irq_domain_ops uniphier_gpio_irq_domain_ops = {
+	.alloc = uniphier_gpio_irq_domain_alloc,
+	.free = irq_domain_free_irqs_common,
+	.activate = uniphier_gpio_irq_domain_activate,
+	.deactivate = uniphier_gpio_irq_domain_deactivate,
+	.translate = uniphier_gpio_irq_domain_translate,
+};
+
+static void uniphier_gpio_hw_init(struct uniphier_gpio_priv *priv)
+{
+	/*
+	 * Due to the hardware design, the noise filter must be enabled to
+	 * detect both edge interrupts.  This filter is intended to remove the
+	 * noise from the irq lines.  It does not work for GPIO input, so GPIO
+	 * debounce is not supported.  Unfortunately, the filter period is
+	 * shared among all irq lines.  Just choose a sensible period here.
+	 */
+	writel(0xff, priv->regs + UNIPHIER_GPIO_IRQ_FLT_CYC);
+}
+
+static unsigned int uniphier_gpio_get_nbanks(unsigned int ngpio)
+{
+	return DIV_ROUND_UP(ngpio, UNIPHIER_GPIO_LINES_PER_BANK);
+}
+
+static int uniphier_gpio_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *parent_np;
+	struct irq_domain *parent_domain;
+	struct uniphier_gpio_priv *priv;
+	struct gpio_chip *chip;
+	struct irq_chip *irq_chip;
+	unsigned int nregs;
+	u32 ngpios;
+	int ret;
+
+	parent_np = of_irq_find_parent(dev->of_node);
+	if (!parent_np)
+		return -ENXIO;
+
+	parent_domain = irq_find_host(parent_np);
+	of_node_put(parent_np);
+	if (!parent_domain)
+		return -EPROBE_DEFER;
+
+	ret = of_property_read_u32(dev->of_node, "ngpios", &ngpios);
+	if (ret)
+		return ret;
+
+	nregs = uniphier_gpio_get_nbanks(ngpios) * 2 + 3;
+	priv = devm_kzalloc(dev, struct_size(priv, saved_vals, nregs),
+			    GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(priv->regs))
+		return PTR_ERR(priv->regs);
+
+	spin_lock_init(&priv->lock);
+
+	chip = &priv->chip;
+	chip->label = dev_name(dev);
+	chip->parent = dev;
+	chip->request = gpiochip_generic_request;
+	chip->free = gpiochip_generic_free;
+	chip->get_direction = uniphier_gpio_get_direction;
+	chip->direction_input = uniphier_gpio_direction_input;
+	chip->direction_output = uniphier_gpio_direction_output;
+	chip->get = uniphier_gpio_get;
+	chip->set = uniphier_gpio_set;
+	chip->set_multiple = uniphier_gpio_set_multiple;
+	chip->to_irq = uniphier_gpio_to_irq;
+	chip->base = -1;
+	chip->ngpio = ngpios;
+
+	irq_chip = &priv->irq_chip;
+	irq_chip->name = dev_name(dev);
+	irq_chip->irq_mask = uniphier_gpio_irq_mask;
+	irq_chip->irq_unmask = uniphier_gpio_irq_unmask;
+	irq_chip->irq_eoi = irq_chip_eoi_parent;
+	irq_chip->irq_set_affinity = irq_chip_set_affinity_parent;
+	irq_chip->irq_set_type = uniphier_gpio_irq_set_type;
+
+	uniphier_gpio_hw_init(priv);
+
+	ret = devm_gpiochip_add_data(dev, chip, priv);
+	if (ret)
+		return ret;
+
+	priv->domain = irq_domain_create_hierarchy(
+					parent_domain, 0,
+					UNIPHIER_GPIO_IRQ_MAX_NUM,
+					of_node_to_fwnode(dev->of_node),
+					&uniphier_gpio_irq_domain_ops, priv);
+	if (!priv->domain)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, priv);
+
+	return 0;
+}
+
+static int uniphier_gpio_remove(struct platform_device *pdev)
+{
+	struct uniphier_gpio_priv *priv = platform_get_drvdata(pdev);
+
+	irq_domain_remove(priv->domain);
+
+	return 0;
+}
+
+static int __maybe_unused uniphier_gpio_suspend(struct device *dev)
+{
+	struct uniphier_gpio_priv *priv = dev_get_drvdata(dev);
+	unsigned int nbanks = uniphier_gpio_get_nbanks(priv->chip.ngpio);
+	u32 *val = priv->saved_vals;
+	unsigned int reg;
+	int i;
+
+	for (i = 0; i < nbanks; i++) {
+		reg = uniphier_gpio_bank_to_reg(i);
+
+		*val++ = readl(priv->regs + reg + UNIPHIER_GPIO_PORT_DATA);
+		*val++ = readl(priv->regs + reg + UNIPHIER_GPIO_PORT_DIR);
+	}
+
+	*val++ = readl(priv->regs + UNIPHIER_GPIO_IRQ_EN);
+	*val++ = readl(priv->regs + UNIPHIER_GPIO_IRQ_MODE);
+	*val++ = readl(priv->regs + UNIPHIER_GPIO_IRQ_FLT_EN);
+
+	return 0;
+}
+
+static int __maybe_unused uniphier_gpio_resume(struct device *dev)
+{
+	struct uniphier_gpio_priv *priv = dev_get_drvdata(dev);
+	unsigned int nbanks = uniphier_gpio_get_nbanks(priv->chip.ngpio);
+	const u32 *val = priv->saved_vals;
+	unsigned int reg;
+	int i;
+
+	for (i = 0; i < nbanks; i++) {
+		reg = uniphier_gpio_bank_to_reg(i);
+
+		writel(*val++, priv->regs + reg + UNIPHIER_GPIO_PORT_DATA);
+		writel(*val++, priv->regs + reg + UNIPHIER_GPIO_PORT_DIR);
+	}
+
+	writel(*val++, priv->regs + UNIPHIER_GPIO_IRQ_EN);
+	writel(*val++, priv->regs + UNIPHIER_GPIO_IRQ_MODE);
+	writel(*val++, priv->regs + UNIPHIER_GPIO_IRQ_FLT_EN);
+
+	uniphier_gpio_hw_init(priv);
+
+	return 0;
+}
+
+static const struct dev_pm_ops uniphier_gpio_pm_ops = {
+	SET_LATE_SYSTEM_SLEEP_PM_OPS(uniphier_gpio_suspend,
+				     uniphier_gpio_resume)
+};
+
+static const struct of_device_id uniphier_gpio_match[] = {
+	{ .compatible = "socionext,uniphier-gpio" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, uniphier_gpio_match);
+
+static struct platform_driver uniphier_gpio_driver = {
+	.probe = uniphier_gpio_probe,
+	.remove = uniphier_gpio_remove,
+	.driver = {
+		.name = "uniphier-gpio",
+		.of_match_table = uniphier_gpio_match,
+		.pm = &uniphier_gpio_pm_ops,
+	},
+};
+module_platform_driver(uniphier_gpio_driver);
+
+MODULE_AUTHOR("Masahiro Yamada <yamada.masahiro@socionext.com>");
+MODULE_DESCRIPTION("UniPhier GPIO driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-vf610.c b/drivers/gpio/gpio-vf610.c
new file mode 100644
index 000000000..c2c38f138
--- /dev/null
+++ b/drivers/gpio/gpio-vf610.c
@@ -0,0 +1,357 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Freescale vf610 GPIO support through PORT and GPIO
+ *
+ * Copyright (c) 2014 Toradex AG.
+ *
+ * Author: Stefan Agner <stefan@agner.ch>.
+ */
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/gpio/driver.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+
+#define VF610_GPIO_PER_PORT		32
+
+struct fsl_gpio_soc_data {
+	/* SoCs has a Port Data Direction Register (PDDR) */
+	bool have_paddr;
+};
+
+struct vf610_gpio_port {
+	struct gpio_chip gc;
+	struct irq_chip ic;
+	void __iomem *base;
+	void __iomem *gpio_base;
+	const struct fsl_gpio_soc_data *sdata;
+	u8 irqc[VF610_GPIO_PER_PORT];
+	struct clk *clk_port;
+	struct clk *clk_gpio;
+	int irq;
+};
+
+#define GPIO_PDOR		0x00
+#define GPIO_PSOR		0x04
+#define GPIO_PCOR		0x08
+#define GPIO_PTOR		0x0c
+#define GPIO_PDIR		0x10
+#define GPIO_PDDR		0x14
+
+#define PORT_PCR(n)		((n) * 0x4)
+#define PORT_PCR_IRQC_OFFSET	16
+
+#define PORT_ISFR		0xa0
+#define PORT_DFER		0xc0
+#define PORT_DFCR		0xc4
+#define PORT_DFWR		0xc8
+
+#define PORT_INT_OFF		0x0
+#define PORT_INT_LOGIC_ZERO	0x8
+#define PORT_INT_RISING_EDGE	0x9
+#define PORT_INT_FALLING_EDGE	0xa
+#define PORT_INT_EITHER_EDGE	0xb
+#define PORT_INT_LOGIC_ONE	0xc
+
+static const struct fsl_gpio_soc_data imx_data = {
+	.have_paddr = true,
+};
+
+static const struct of_device_id vf610_gpio_dt_ids[] = {
+	{ .compatible = "fsl,vf610-gpio",	.data = NULL, },
+	{ .compatible = "fsl,imx7ulp-gpio",	.data = &imx_data, },
+	{ /* sentinel */ }
+};
+
+static inline void vf610_gpio_writel(u32 val, void __iomem *reg)
+{
+	writel_relaxed(val, reg);
+}
+
+static inline u32 vf610_gpio_readl(void __iomem *reg)
+{
+	return readl_relaxed(reg);
+}
+
+static int vf610_gpio_get(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct vf610_gpio_port *port = gpiochip_get_data(gc);
+	unsigned long mask = BIT(gpio);
+	unsigned long offset = GPIO_PDIR;
+
+	if (port->sdata && port->sdata->have_paddr) {
+		mask &= vf610_gpio_readl(port->gpio_base + GPIO_PDDR);
+		if (mask)
+			offset = GPIO_PDOR;
+	}
+
+	return !!(vf610_gpio_readl(port->gpio_base + offset) & BIT(gpio));
+}
+
+static void vf610_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+	struct vf610_gpio_port *port = gpiochip_get_data(gc);
+	unsigned long mask = BIT(gpio);
+	unsigned long offset = val ? GPIO_PSOR : GPIO_PCOR;
+
+	vf610_gpio_writel(mask, port->gpio_base + offset);
+}
+
+static int vf610_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
+{
+	struct vf610_gpio_port *port = gpiochip_get_data(chip);
+	unsigned long mask = BIT(gpio);
+	u32 val;
+
+	if (port->sdata && port->sdata->have_paddr) {
+		val = vf610_gpio_readl(port->gpio_base + GPIO_PDDR);
+		val &= ~mask;
+		vf610_gpio_writel(val, port->gpio_base + GPIO_PDDR);
+	}
+
+	return pinctrl_gpio_direction_input(chip->base + gpio);
+}
+
+static int vf610_gpio_direction_output(struct gpio_chip *chip, unsigned gpio,
+				       int value)
+{
+	struct vf610_gpio_port *port = gpiochip_get_data(chip);
+	unsigned long mask = BIT(gpio);
+	u32 val;
+
+	vf610_gpio_set(chip, gpio, value);
+
+	if (port->sdata && port->sdata->have_paddr) {
+		val = vf610_gpio_readl(port->gpio_base + GPIO_PDDR);
+		val |= mask;
+		vf610_gpio_writel(val, port->gpio_base + GPIO_PDDR);
+	}
+
+	return pinctrl_gpio_direction_output(chip->base + gpio);
+}
+
+static void vf610_gpio_irq_handler(struct irq_desc *desc)
+{
+	struct vf610_gpio_port *port =
+		gpiochip_get_data(irq_desc_get_handler_data(desc));
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+	int pin;
+	unsigned long irq_isfr;
+
+	chained_irq_enter(chip, desc);
+
+	irq_isfr = vf610_gpio_readl(port->base + PORT_ISFR);
+
+	for_each_set_bit(pin, &irq_isfr, VF610_GPIO_PER_PORT) {
+		vf610_gpio_writel(BIT(pin), port->base + PORT_ISFR);
+
+		generic_handle_irq(irq_find_mapping(port->gc.irq.domain, pin));
+	}
+
+	chained_irq_exit(chip, desc);
+}
+
+static void vf610_gpio_irq_ack(struct irq_data *d)
+{
+	struct vf610_gpio_port *port =
+		gpiochip_get_data(irq_data_get_irq_chip_data(d));
+	int gpio = d->hwirq;
+
+	vf610_gpio_writel(BIT(gpio), port->base + PORT_ISFR);
+}
+
+static int vf610_gpio_irq_set_type(struct irq_data *d, u32 type)
+{
+	struct vf610_gpio_port *port =
+		gpiochip_get_data(irq_data_get_irq_chip_data(d));
+	u8 irqc;
+
+	switch (type) {
+	case IRQ_TYPE_EDGE_RISING:
+		irqc = PORT_INT_RISING_EDGE;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		irqc = PORT_INT_FALLING_EDGE;
+		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		irqc = PORT_INT_EITHER_EDGE;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		irqc = PORT_INT_LOGIC_ZERO;
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		irqc = PORT_INT_LOGIC_ONE;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	port->irqc[d->hwirq] = irqc;
+
+	if (type & IRQ_TYPE_LEVEL_MASK)
+		irq_set_handler_locked(d, handle_level_irq);
+	else
+		irq_set_handler_locked(d, handle_edge_irq);
+
+	return 0;
+}
+
+static void vf610_gpio_irq_mask(struct irq_data *d)
+{
+	struct vf610_gpio_port *port =
+		gpiochip_get_data(irq_data_get_irq_chip_data(d));
+	void __iomem *pcr_base = port->base + PORT_PCR(d->hwirq);
+
+	vf610_gpio_writel(0, pcr_base);
+}
+
+static void vf610_gpio_irq_unmask(struct irq_data *d)
+{
+	struct vf610_gpio_port *port =
+		gpiochip_get_data(irq_data_get_irq_chip_data(d));
+	void __iomem *pcr_base = port->base + PORT_PCR(d->hwirq);
+
+	vf610_gpio_writel(port->irqc[d->hwirq] << PORT_PCR_IRQC_OFFSET,
+			  pcr_base);
+}
+
+static int vf610_gpio_irq_set_wake(struct irq_data *d, u32 enable)
+{
+	struct vf610_gpio_port *port =
+		gpiochip_get_data(irq_data_get_irq_chip_data(d));
+
+	if (enable)
+		enable_irq_wake(port->irq);
+	else
+		disable_irq_wake(port->irq);
+
+	return 0;
+}
+
+static void vf610_gpio_disable_clk(void *data)
+{
+	clk_disable_unprepare(data);
+}
+
+static int vf610_gpio_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct vf610_gpio_port *port;
+	struct gpio_chip *gc;
+	struct gpio_irq_chip *girq;
+	struct irq_chip *ic;
+	int i;
+	int ret;
+
+	port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL);
+	if (!port)
+		return -ENOMEM;
+
+	port->sdata = of_device_get_match_data(dev);
+	port->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(port->base))
+		return PTR_ERR(port->base);
+
+	port->gpio_base = devm_platform_ioremap_resource(pdev, 1);
+	if (IS_ERR(port->gpio_base))
+		return PTR_ERR(port->gpio_base);
+
+	port->irq = platform_get_irq(pdev, 0);
+	if (port->irq < 0)
+		return port->irq;
+
+	port->clk_port = devm_clk_get(dev, "port");
+	ret = PTR_ERR_OR_ZERO(port->clk_port);
+	if (!ret) {
+		ret = clk_prepare_enable(port->clk_port);
+		if (ret)
+			return ret;
+		ret = devm_add_action_or_reset(dev, vf610_gpio_disable_clk,
+					       port->clk_port);
+		if (ret)
+			return ret;
+	} else if (ret == -EPROBE_DEFER) {
+		/*
+		 * Percolate deferrals, for anything else,
+		 * just live without the clocking.
+		 */
+		return ret;
+	}
+
+	port->clk_gpio = devm_clk_get(dev, "gpio");
+	ret = PTR_ERR_OR_ZERO(port->clk_gpio);
+	if (!ret) {
+		ret = clk_prepare_enable(port->clk_gpio);
+		if (ret)
+			return ret;
+		ret = devm_add_action_or_reset(dev, vf610_gpio_disable_clk,
+					       port->clk_gpio);
+		if (ret)
+			return ret;
+	} else if (ret == -EPROBE_DEFER) {
+		return ret;
+	}
+
+	gc = &port->gc;
+	gc->of_node = np;
+	gc->parent = dev;
+	gc->label = dev_name(dev);
+	gc->ngpio = VF610_GPIO_PER_PORT;
+	gc->base = of_alias_get_id(np, "gpio") * VF610_GPIO_PER_PORT;
+
+	gc->request = gpiochip_generic_request;
+	gc->free = gpiochip_generic_free;
+	gc->direction_input = vf610_gpio_direction_input;
+	gc->get = vf610_gpio_get;
+	gc->direction_output = vf610_gpio_direction_output;
+	gc->set = vf610_gpio_set;
+
+	ic = &port->ic;
+	ic->name = "gpio-vf610";
+	ic->irq_ack = vf610_gpio_irq_ack;
+	ic->irq_mask = vf610_gpio_irq_mask;
+	ic->irq_unmask = vf610_gpio_irq_unmask;
+	ic->irq_set_type = vf610_gpio_irq_set_type;
+	ic->irq_set_wake = vf610_gpio_irq_set_wake;
+
+	/* Mask all GPIO interrupts */
+	for (i = 0; i < gc->ngpio; i++)
+		vf610_gpio_writel(0, port->base + PORT_PCR(i));
+
+	/* Clear the interrupt status register for all GPIO's */
+	vf610_gpio_writel(~0, port->base + PORT_ISFR);
+
+	girq = &gc->irq;
+	girq->chip = ic;
+	girq->parent_handler = vf610_gpio_irq_handler;
+	girq->num_parents = 1;
+	girq->parents = devm_kcalloc(&pdev->dev, 1,
+				     sizeof(*girq->parents),
+				     GFP_KERNEL);
+	if (!girq->parents)
+		return -ENOMEM;
+	girq->parents[0] = port->irq;
+	girq->default_type = IRQ_TYPE_NONE;
+	girq->handler = handle_edge_irq;
+
+	return devm_gpiochip_add_data(dev, gc, port);
+}
+
+static struct platform_driver vf610_gpio_driver = {
+	.driver		= {
+		.name	= "gpio-vf610",
+		.of_match_table = vf610_gpio_dt_ids,
+	},
+	.probe		= vf610_gpio_probe,
+};
+
+builtin_platform_driver(vf610_gpio_driver);
diff --git a/drivers/gpio/gpio-viperboard.c b/drivers/gpio/gpio-viperboard.c
new file mode 100644
index 000000000..c301c1d56
--- /dev/null
+++ b/drivers/gpio/gpio-viperboard.c
@@ -0,0 +1,479 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *  Nano River Technologies viperboard GPIO lib driver
+ *
+ *  (C) 2012 by Lemonage GmbH
+ *  Author: Lars Poeschel <poeschel@lemonage.de>
+ *  All rights reserved.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/usb.h>
+#include <linux/gpio/driver.h>
+
+#include <linux/mfd/viperboard.h>
+
+#define VPRBRD_GPIOA_CLK_1MHZ		0
+#define VPRBRD_GPIOA_CLK_100KHZ		1
+#define VPRBRD_GPIOA_CLK_10KHZ		2
+#define VPRBRD_GPIOA_CLK_1KHZ		3
+#define VPRBRD_GPIOA_CLK_100HZ		4
+#define VPRBRD_GPIOA_CLK_10HZ		5
+
+#define VPRBRD_GPIOA_FREQ_DEFAULT	1000
+
+#define VPRBRD_GPIOA_CMD_CONT		0x00
+#define VPRBRD_GPIOA_CMD_PULSE		0x01
+#define VPRBRD_GPIOA_CMD_PWM		0x02
+#define VPRBRD_GPIOA_CMD_SETOUT		0x03
+#define VPRBRD_GPIOA_CMD_SETIN		0x04
+#define VPRBRD_GPIOA_CMD_SETINT		0x05
+#define VPRBRD_GPIOA_CMD_GETIN		0x06
+
+#define VPRBRD_GPIOB_CMD_SETDIR		0x00
+#define VPRBRD_GPIOB_CMD_SETVAL		0x01
+
+struct vprbrd_gpioa_msg {
+	u8 cmd;
+	u8 clk;
+	u8 offset;
+	u8 t1;
+	u8 t2;
+	u8 invert;
+	u8 pwmlevel;
+	u8 outval;
+	u8 risefall;
+	u8 answer;
+	u8 __fill;
+} __packed;
+
+struct vprbrd_gpiob_msg {
+	u8 cmd;
+	u16 val;
+	u16 mask;
+} __packed;
+
+struct vprbrd_gpio {
+	struct gpio_chip gpioa; /* gpio a related things */
+	u32 gpioa_out;
+	u32 gpioa_val;
+	struct gpio_chip gpiob; /* gpio b related things */
+	u32 gpiob_out;
+	u32 gpiob_val;
+	struct vprbrd *vb;
+};
+
+/* gpioa sampling clock module parameter */
+static unsigned char gpioa_clk;
+static unsigned int gpioa_freq = VPRBRD_GPIOA_FREQ_DEFAULT;
+module_param(gpioa_freq, uint, 0);
+MODULE_PARM_DESC(gpioa_freq,
+	"gpio-a sampling freq in Hz (default is 1000Hz) valid values: 10, 100, 1000, 10000, 100000, 1000000");
+
+/* ----- begin of gipo a chip -------------------------------------------- */
+
+static int vprbrd_gpioa_get(struct gpio_chip *chip,
+		unsigned int offset)
+{
+	int ret, answer, error = 0;
+	struct vprbrd_gpio *gpio = gpiochip_get_data(chip);
+	struct vprbrd *vb = gpio->vb;
+	struct vprbrd_gpioa_msg *gamsg = (struct vprbrd_gpioa_msg *)vb->buf;
+
+	/* if io is set to output, just return the saved value */
+	if (gpio->gpioa_out & (1 << offset))
+		return !!(gpio->gpioa_val & (1 << offset));
+
+	mutex_lock(&vb->lock);
+
+	gamsg->cmd = VPRBRD_GPIOA_CMD_GETIN;
+	gamsg->clk = 0x00;
+	gamsg->offset = offset;
+	gamsg->t1 = 0x00;
+	gamsg->t2 = 0x00;
+	gamsg->invert = 0x00;
+	gamsg->pwmlevel = 0x00;
+	gamsg->outval = 0x00;
+	gamsg->risefall = 0x00;
+	gamsg->answer = 0x00;
+	gamsg->__fill = 0x00;
+
+	ret = usb_control_msg(vb->usb_dev, usb_sndctrlpipe(vb->usb_dev, 0),
+		VPRBRD_USB_REQUEST_GPIOA, VPRBRD_USB_TYPE_OUT, 0x0000,
+		0x0000, gamsg, sizeof(struct vprbrd_gpioa_msg),
+		VPRBRD_USB_TIMEOUT_MS);
+	if (ret != sizeof(struct vprbrd_gpioa_msg))
+		error = -EREMOTEIO;
+
+	ret = usb_control_msg(vb->usb_dev, usb_rcvctrlpipe(vb->usb_dev, 0),
+		VPRBRD_USB_REQUEST_GPIOA, VPRBRD_USB_TYPE_IN, 0x0000,
+		0x0000, gamsg, sizeof(struct vprbrd_gpioa_msg),
+		VPRBRD_USB_TIMEOUT_MS);
+	answer = gamsg->answer & 0x01;
+
+	mutex_unlock(&vb->lock);
+
+	if (ret != sizeof(struct vprbrd_gpioa_msg))
+		error = -EREMOTEIO;
+
+	if (error)
+		return error;
+
+	return answer;
+}
+
+static void vprbrd_gpioa_set(struct gpio_chip *chip,
+		unsigned int offset, int value)
+{
+	int ret;
+	struct vprbrd_gpio *gpio = gpiochip_get_data(chip);
+	struct vprbrd *vb = gpio->vb;
+	struct vprbrd_gpioa_msg *gamsg = (struct vprbrd_gpioa_msg *)vb->buf;
+
+	if (gpio->gpioa_out & (1 << offset)) {
+		if (value)
+			gpio->gpioa_val |= (1 << offset);
+		else
+			gpio->gpioa_val &= ~(1 << offset);
+
+		mutex_lock(&vb->lock);
+
+		gamsg->cmd = VPRBRD_GPIOA_CMD_SETOUT;
+		gamsg->clk = 0x00;
+		gamsg->offset = offset;
+		gamsg->t1 = 0x00;
+		gamsg->t2 = 0x00;
+		gamsg->invert = 0x00;
+		gamsg->pwmlevel = 0x00;
+		gamsg->outval = value;
+		gamsg->risefall = 0x00;
+		gamsg->answer = 0x00;
+		gamsg->__fill = 0x00;
+
+		ret = usb_control_msg(vb->usb_dev,
+			usb_sndctrlpipe(vb->usb_dev, 0),
+			VPRBRD_USB_REQUEST_GPIOA, VPRBRD_USB_TYPE_OUT,
+			0x0000,	0x0000, gamsg,
+			sizeof(struct vprbrd_gpioa_msg), VPRBRD_USB_TIMEOUT_MS);
+
+		mutex_unlock(&vb->lock);
+
+		if (ret != sizeof(struct vprbrd_gpioa_msg))
+			dev_err(chip->parent, "usb error setting pin value\n");
+	}
+}
+
+static int vprbrd_gpioa_direction_input(struct gpio_chip *chip,
+			unsigned int offset)
+{
+	int ret;
+	struct vprbrd_gpio *gpio = gpiochip_get_data(chip);
+	struct vprbrd *vb = gpio->vb;
+	struct vprbrd_gpioa_msg *gamsg = (struct vprbrd_gpioa_msg *)vb->buf;
+
+	gpio->gpioa_out &= ~(1 << offset);
+
+	mutex_lock(&vb->lock);
+
+	gamsg->cmd = VPRBRD_GPIOA_CMD_SETIN;
+	gamsg->clk = gpioa_clk;
+	gamsg->offset = offset;
+	gamsg->t1 = 0x00;
+	gamsg->t2 = 0x00;
+	gamsg->invert = 0x00;
+	gamsg->pwmlevel = 0x00;
+	gamsg->outval = 0x00;
+	gamsg->risefall = 0x00;
+	gamsg->answer = 0x00;
+	gamsg->__fill = 0x00;
+
+	ret = usb_control_msg(vb->usb_dev, usb_sndctrlpipe(vb->usb_dev, 0),
+		VPRBRD_USB_REQUEST_GPIOA, VPRBRD_USB_TYPE_OUT, 0x0000,
+		0x0000, gamsg, sizeof(struct vprbrd_gpioa_msg),
+		VPRBRD_USB_TIMEOUT_MS);
+
+	mutex_unlock(&vb->lock);
+
+	if (ret != sizeof(struct vprbrd_gpioa_msg))
+		return -EREMOTEIO;
+
+	return 0;
+}
+
+static int vprbrd_gpioa_direction_output(struct gpio_chip *chip,
+			unsigned int offset, int value)
+{
+	int ret;
+	struct vprbrd_gpio *gpio = gpiochip_get_data(chip);
+	struct vprbrd *vb = gpio->vb;
+	struct vprbrd_gpioa_msg *gamsg = (struct vprbrd_gpioa_msg *)vb->buf;
+
+	gpio->gpioa_out |= (1 << offset);
+	if (value)
+		gpio->gpioa_val |= (1 << offset);
+	else
+		gpio->gpioa_val &= ~(1 << offset);
+
+	mutex_lock(&vb->lock);
+
+	gamsg->cmd = VPRBRD_GPIOA_CMD_SETOUT;
+	gamsg->clk = 0x00;
+	gamsg->offset = offset;
+	gamsg->t1 = 0x00;
+	gamsg->t2 = 0x00;
+	gamsg->invert = 0x00;
+	gamsg->pwmlevel = 0x00;
+	gamsg->outval = value;
+	gamsg->risefall = 0x00;
+	gamsg->answer = 0x00;
+	gamsg->__fill = 0x00;
+
+	ret = usb_control_msg(vb->usb_dev, usb_sndctrlpipe(vb->usb_dev, 0),
+		VPRBRD_USB_REQUEST_GPIOA, VPRBRD_USB_TYPE_OUT, 0x0000,
+		0x0000, gamsg, sizeof(struct vprbrd_gpioa_msg),
+		VPRBRD_USB_TIMEOUT_MS);
+
+	mutex_unlock(&vb->lock);
+
+	if (ret != sizeof(struct vprbrd_gpioa_msg))
+		return -EREMOTEIO;
+
+	return 0;
+}
+
+/* ----- end of gpio a chip ---------------------------------------------- */
+
+/* ----- begin of gipo b chip -------------------------------------------- */
+
+static int vprbrd_gpiob_setdir(struct vprbrd *vb, unsigned int offset,
+	unsigned int dir)
+{
+	struct vprbrd_gpiob_msg *gbmsg = (struct vprbrd_gpiob_msg *)vb->buf;
+	int ret;
+
+	gbmsg->cmd = VPRBRD_GPIOB_CMD_SETDIR;
+	gbmsg->val = cpu_to_be16(dir << offset);
+	gbmsg->mask = cpu_to_be16(0x0001 << offset);
+
+	ret = usb_control_msg(vb->usb_dev, usb_sndctrlpipe(vb->usb_dev, 0),
+		VPRBRD_USB_REQUEST_GPIOB, VPRBRD_USB_TYPE_OUT, 0x0000,
+		0x0000, gbmsg, sizeof(struct vprbrd_gpiob_msg),
+		VPRBRD_USB_TIMEOUT_MS);
+
+	if (ret != sizeof(struct vprbrd_gpiob_msg))
+		return -EREMOTEIO;
+
+	return 0;
+}
+
+static int vprbrd_gpiob_get(struct gpio_chip *chip,
+		unsigned int offset)
+{
+	int ret;
+	u16 val;
+	struct vprbrd_gpio *gpio = gpiochip_get_data(chip);
+	struct vprbrd *vb = gpio->vb;
+	struct vprbrd_gpiob_msg *gbmsg = (struct vprbrd_gpiob_msg *)vb->buf;
+
+	/* if io is set to output, just return the saved value */
+	if (gpio->gpiob_out & (1 << offset))
+		return gpio->gpiob_val & (1 << offset);
+
+	mutex_lock(&vb->lock);
+
+	ret = usb_control_msg(vb->usb_dev, usb_rcvctrlpipe(vb->usb_dev, 0),
+		VPRBRD_USB_REQUEST_GPIOB, VPRBRD_USB_TYPE_IN, 0x0000,
+		0x0000, gbmsg,	sizeof(struct vprbrd_gpiob_msg),
+		VPRBRD_USB_TIMEOUT_MS);
+	val = gbmsg->val;
+
+	mutex_unlock(&vb->lock);
+
+	if (ret != sizeof(struct vprbrd_gpiob_msg))
+		return ret;
+
+	/* cache the read values */
+	gpio->gpiob_val = be16_to_cpu(val);
+
+	return (gpio->gpiob_val >> offset) & 0x1;
+}
+
+static void vprbrd_gpiob_set(struct gpio_chip *chip,
+		unsigned int offset, int value)
+{
+	int ret;
+	struct vprbrd_gpio *gpio = gpiochip_get_data(chip);
+	struct vprbrd *vb = gpio->vb;
+	struct vprbrd_gpiob_msg *gbmsg = (struct vprbrd_gpiob_msg *)vb->buf;
+
+	if (gpio->gpiob_out & (1 << offset)) {
+		if (value)
+			gpio->gpiob_val |= (1 << offset);
+		else
+			gpio->gpiob_val &= ~(1 << offset);
+
+		mutex_lock(&vb->lock);
+
+		gbmsg->cmd = VPRBRD_GPIOB_CMD_SETVAL;
+		gbmsg->val = cpu_to_be16(value << offset);
+		gbmsg->mask = cpu_to_be16(0x0001 << offset);
+
+		ret = usb_control_msg(vb->usb_dev,
+			usb_sndctrlpipe(vb->usb_dev, 0),
+			VPRBRD_USB_REQUEST_GPIOB, VPRBRD_USB_TYPE_OUT,
+			0x0000,	0x0000, gbmsg,
+			sizeof(struct vprbrd_gpiob_msg), VPRBRD_USB_TIMEOUT_MS);
+
+		mutex_unlock(&vb->lock);
+
+		if (ret != sizeof(struct vprbrd_gpiob_msg))
+			dev_err(chip->parent, "usb error setting pin value\n");
+	}
+}
+
+static int vprbrd_gpiob_direction_input(struct gpio_chip *chip,
+			unsigned int offset)
+{
+	int ret;
+	struct vprbrd_gpio *gpio = gpiochip_get_data(chip);
+	struct vprbrd *vb = gpio->vb;
+
+	gpio->gpiob_out &= ~(1 << offset);
+
+	mutex_lock(&vb->lock);
+
+	ret = vprbrd_gpiob_setdir(vb, offset, 0);
+
+	mutex_unlock(&vb->lock);
+
+	if (ret)
+		dev_err(chip->parent, "usb error setting pin to input\n");
+
+	return ret;
+}
+
+static int vprbrd_gpiob_direction_output(struct gpio_chip *chip,
+			unsigned int offset, int value)
+{
+	int ret;
+	struct vprbrd_gpio *gpio = gpiochip_get_data(chip);
+	struct vprbrd *vb = gpio->vb;
+
+	gpio->gpiob_out |= (1 << offset);
+
+	mutex_lock(&vb->lock);
+
+	ret = vprbrd_gpiob_setdir(vb, offset, 1);
+	if (ret)
+		dev_err(chip->parent, "usb error setting pin to output\n");
+
+	mutex_unlock(&vb->lock);
+
+	vprbrd_gpiob_set(chip, offset, value);
+
+	return ret;
+}
+
+/* ----- end of gpio b chip ---------------------------------------------- */
+
+static int vprbrd_gpio_probe(struct platform_device *pdev)
+{
+	struct vprbrd *vb = dev_get_drvdata(pdev->dev.parent);
+	struct vprbrd_gpio *vb_gpio;
+	int ret;
+
+	vb_gpio = devm_kzalloc(&pdev->dev, sizeof(*vb_gpio), GFP_KERNEL);
+	if (vb_gpio == NULL)
+		return -ENOMEM;
+
+	vb_gpio->vb = vb;
+	/* registering gpio a */
+	vb_gpio->gpioa.label = "viperboard gpio a";
+	vb_gpio->gpioa.parent = &pdev->dev;
+	vb_gpio->gpioa.owner = THIS_MODULE;
+	vb_gpio->gpioa.base = -1;
+	vb_gpio->gpioa.ngpio = 16;
+	vb_gpio->gpioa.can_sleep = true;
+	vb_gpio->gpioa.set = vprbrd_gpioa_set;
+	vb_gpio->gpioa.get = vprbrd_gpioa_get;
+	vb_gpio->gpioa.direction_input = vprbrd_gpioa_direction_input;
+	vb_gpio->gpioa.direction_output = vprbrd_gpioa_direction_output;
+	ret = devm_gpiochip_add_data(&pdev->dev, &vb_gpio->gpioa, vb_gpio);
+	if (ret < 0) {
+		dev_err(vb_gpio->gpioa.parent, "could not add gpio a");
+		return ret;
+	}
+
+	/* registering gpio b */
+	vb_gpio->gpiob.label = "viperboard gpio b";
+	vb_gpio->gpiob.parent = &pdev->dev;
+	vb_gpio->gpiob.owner = THIS_MODULE;
+	vb_gpio->gpiob.base = -1;
+	vb_gpio->gpiob.ngpio = 16;
+	vb_gpio->gpiob.can_sleep = true;
+	vb_gpio->gpiob.set = vprbrd_gpiob_set;
+	vb_gpio->gpiob.get = vprbrd_gpiob_get;
+	vb_gpio->gpiob.direction_input = vprbrd_gpiob_direction_input;
+	vb_gpio->gpiob.direction_output = vprbrd_gpiob_direction_output;
+	ret = devm_gpiochip_add_data(&pdev->dev, &vb_gpio->gpiob, vb_gpio);
+	if (ret < 0) {
+		dev_err(vb_gpio->gpiob.parent, "could not add gpio b");
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, vb_gpio);
+
+	return ret;
+}
+
+static struct platform_driver vprbrd_gpio_driver = {
+	.driver.name	= "viperboard-gpio",
+	.probe		= vprbrd_gpio_probe,
+};
+
+static int __init vprbrd_gpio_init(void)
+{
+	switch (gpioa_freq) {
+	case 1000000:
+		gpioa_clk = VPRBRD_GPIOA_CLK_1MHZ;
+		break;
+	case 100000:
+		gpioa_clk = VPRBRD_GPIOA_CLK_100KHZ;
+		break;
+	case 10000:
+		gpioa_clk = VPRBRD_GPIOA_CLK_10KHZ;
+		break;
+	case 1000:
+		gpioa_clk = VPRBRD_GPIOA_CLK_1KHZ;
+		break;
+	case 100:
+		gpioa_clk = VPRBRD_GPIOA_CLK_100HZ;
+		break;
+	case 10:
+		gpioa_clk = VPRBRD_GPIOA_CLK_10HZ;
+		break;
+	default:
+		pr_warn("invalid gpioa_freq (%d)\n", gpioa_freq);
+		gpioa_clk = VPRBRD_GPIOA_CLK_1KHZ;
+	}
+
+	return platform_driver_register(&vprbrd_gpio_driver);
+}
+subsys_initcall(vprbrd_gpio_init);
+
+static void __exit vprbrd_gpio_exit(void)
+{
+	platform_driver_unregister(&vprbrd_gpio_driver);
+}
+module_exit(vprbrd_gpio_exit);
+
+MODULE_AUTHOR("Lars Poeschel <poeschel@lemonage.de>");
+MODULE_DESCRIPTION("GPIO driver for Nano River Techs Viperboard");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:viperboard-gpio");
diff --git a/drivers/gpio/gpio-vr41xx.c b/drivers/gpio/gpio-vr41xx.c
new file mode 100644
index 000000000..8d09b619c
--- /dev/null
+++ b/drivers/gpio/gpio-vr41xx.c
@@ -0,0 +1,541 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *  Driver for NEC VR4100 series General-purpose I/O Unit.
+ *
+ *  Copyright (C) 2002 MontaVista Software Inc.
+ *	Author: Yoichi Yuasa <source@mvista.com>
+ *  Copyright (C) 2003-2009  Yoichi Yuasa <yuasa@linux-mips.org>
+ */
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/gpio/driver.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+#include <asm/vr41xx/giu.h>
+#include <asm/vr41xx/irq.h>
+#include <asm/vr41xx/vr41xx.h>
+
+MODULE_AUTHOR("Yoichi Yuasa <yuasa@linux-mips.org>");
+MODULE_DESCRIPTION("NEC VR4100 series General-purpose I/O Unit driver");
+MODULE_LICENSE("GPL");
+
+#define GIUIOSELL	0x00
+#define GIUIOSELH	0x02
+#define GIUPIODL	0x04
+#define GIUPIODH	0x06
+#define GIUINTSTATL	0x08
+#define GIUINTSTATH	0x0a
+#define GIUINTENL	0x0c
+#define GIUINTENH	0x0e
+#define GIUINTTYPL	0x10
+#define GIUINTTYPH	0x12
+#define GIUINTALSELL	0x14
+#define GIUINTALSELH	0x16
+#define GIUINTHTSELL	0x18
+#define GIUINTHTSELH	0x1a
+#define GIUPODATL	0x1c
+#define GIUPODATEN	0x1c
+#define GIUPODATH	0x1e
+ #define PIOEN0		0x0100
+ #define PIOEN1		0x0200
+#define GIUPODAT	0x1e
+#define GIUFEDGEINHL	0x20
+#define GIUFEDGEINHH	0x22
+#define GIUREDGEINHL	0x24
+#define GIUREDGEINHH	0x26
+
+#define GIUUSEUPDN	0x1e0
+#define GIUTERMUPDN	0x1e2
+
+#define GPIO_HAS_PULLUPDOWN_IO		0x0001
+#define GPIO_HAS_OUTPUT_ENABLE		0x0002
+#define GPIO_HAS_INTERRUPT_EDGE_SELECT	0x0100
+
+enum {
+	GPIO_INPUT,
+	GPIO_OUTPUT,
+};
+
+static DEFINE_SPINLOCK(giu_lock);
+static unsigned long giu_flags;
+
+static void __iomem *giu_base;
+static struct gpio_chip vr41xx_gpio_chip;
+
+#define giu_read(offset)		readw(giu_base + (offset))
+#define giu_write(offset, value)	writew((value), giu_base + (offset))
+
+#define GPIO_PIN_OF_IRQ(irq)	((irq) - GIU_IRQ_BASE)
+#define GIUINT_HIGH_OFFSET	16
+#define GIUINT_HIGH_MAX		32
+
+static inline u16 giu_set(u16 offset, u16 set)
+{
+	u16 data;
+
+	data = giu_read(offset);
+	data |= set;
+	giu_write(offset, data);
+
+	return data;
+}
+
+static inline u16 giu_clear(u16 offset, u16 clear)
+{
+	u16 data;
+
+	data = giu_read(offset);
+	data &= ~clear;
+	giu_write(offset, data);
+
+	return data;
+}
+
+static void ack_giuint_low(struct irq_data *d)
+{
+	giu_write(GIUINTSTATL, 1 << GPIO_PIN_OF_IRQ(d->irq));
+}
+
+static void mask_giuint_low(struct irq_data *d)
+{
+	giu_clear(GIUINTENL, 1 << GPIO_PIN_OF_IRQ(d->irq));
+}
+
+static void mask_ack_giuint_low(struct irq_data *d)
+{
+	unsigned int pin;
+
+	pin = GPIO_PIN_OF_IRQ(d->irq);
+	giu_clear(GIUINTENL, 1 << pin);
+	giu_write(GIUINTSTATL, 1 << pin);
+}
+
+static void unmask_giuint_low(struct irq_data *d)
+{
+	giu_set(GIUINTENL, 1 << GPIO_PIN_OF_IRQ(d->irq));
+}
+
+static unsigned int startup_giuint(struct irq_data *data)
+{
+	int ret;
+
+	ret = gpiochip_lock_as_irq(&vr41xx_gpio_chip, irqd_to_hwirq(data));
+	if (ret) {
+		dev_err(vr41xx_gpio_chip.parent,
+			"unable to lock HW IRQ %lu for IRQ\n",
+			data->hwirq);
+		return ret;
+	}
+
+	/* Satisfy the .enable semantics by unmasking the line */
+	unmask_giuint_low(data);
+	return 0;
+}
+
+static void shutdown_giuint(struct irq_data *data)
+{
+	mask_giuint_low(data);
+	gpiochip_unlock_as_irq(&vr41xx_gpio_chip, data->hwirq);
+}
+
+static struct irq_chip giuint_low_irq_chip = {
+	.name		= "GIUINTL",
+	.irq_ack	= ack_giuint_low,
+	.irq_mask	= mask_giuint_low,
+	.irq_mask_ack	= mask_ack_giuint_low,
+	.irq_unmask	= unmask_giuint_low,
+	.irq_startup	= startup_giuint,
+	.irq_shutdown	= shutdown_giuint,
+};
+
+static void ack_giuint_high(struct irq_data *d)
+{
+	giu_write(GIUINTSTATH,
+		  1 << (GPIO_PIN_OF_IRQ(d->irq) - GIUINT_HIGH_OFFSET));
+}
+
+static void mask_giuint_high(struct irq_data *d)
+{
+	giu_clear(GIUINTENH, 1 << (GPIO_PIN_OF_IRQ(d->irq) - GIUINT_HIGH_OFFSET));
+}
+
+static void mask_ack_giuint_high(struct irq_data *d)
+{
+	unsigned int pin;
+
+	pin = GPIO_PIN_OF_IRQ(d->irq) - GIUINT_HIGH_OFFSET;
+	giu_clear(GIUINTENH, 1 << pin);
+	giu_write(GIUINTSTATH, 1 << pin);
+}
+
+static void unmask_giuint_high(struct irq_data *d)
+{
+	giu_set(GIUINTENH, 1 << (GPIO_PIN_OF_IRQ(d->irq) - GIUINT_HIGH_OFFSET));
+}
+
+static struct irq_chip giuint_high_irq_chip = {
+	.name		= "GIUINTH",
+	.irq_ack	= ack_giuint_high,
+	.irq_mask	= mask_giuint_high,
+	.irq_mask_ack	= mask_ack_giuint_high,
+	.irq_unmask	= unmask_giuint_high,
+};
+
+static int giu_get_irq(unsigned int irq)
+{
+	u16 pendl, pendh, maskl, maskh;
+	int i;
+
+	pendl = giu_read(GIUINTSTATL);
+	pendh = giu_read(GIUINTSTATH);
+	maskl = giu_read(GIUINTENL);
+	maskh = giu_read(GIUINTENH);
+
+	maskl &= pendl;
+	maskh &= pendh;
+
+	if (maskl) {
+		for (i = 0; i < 16; i++) {
+			if (maskl & (1 << i))
+				return GIU_IRQ(i);
+		}
+	} else if (maskh) {
+		for (i = 0; i < 16; i++) {
+			if (maskh & (1 << i))
+				return GIU_IRQ(i + GIUINT_HIGH_OFFSET);
+		}
+	}
+
+	printk(KERN_ERR "spurious GIU interrupt: %04x(%04x),%04x(%04x)\n",
+	       maskl, pendl, maskh, pendh);
+
+	return -EINVAL;
+}
+
+void vr41xx_set_irq_trigger(unsigned int pin, irq_trigger_t trigger,
+			    irq_signal_t signal)
+{
+	u16 mask;
+
+	if (pin < GIUINT_HIGH_OFFSET) {
+		mask = 1 << pin;
+		if (trigger != IRQ_TRIGGER_LEVEL) {
+			giu_set(GIUINTTYPL, mask);
+			if (signal == IRQ_SIGNAL_HOLD)
+				giu_set(GIUINTHTSELL, mask);
+			else
+				giu_clear(GIUINTHTSELL, mask);
+			if (giu_flags & GPIO_HAS_INTERRUPT_EDGE_SELECT) {
+				switch (trigger) {
+				case IRQ_TRIGGER_EDGE_FALLING:
+					giu_set(GIUFEDGEINHL, mask);
+					giu_clear(GIUREDGEINHL, mask);
+					break;
+				case IRQ_TRIGGER_EDGE_RISING:
+					giu_clear(GIUFEDGEINHL, mask);
+					giu_set(GIUREDGEINHL, mask);
+					break;
+				default:
+					giu_set(GIUFEDGEINHL, mask);
+					giu_set(GIUREDGEINHL, mask);
+					break;
+				}
+			}
+			irq_set_chip_and_handler(GIU_IRQ(pin),
+						 &giuint_low_irq_chip,
+						 handle_edge_irq);
+		} else {
+			giu_clear(GIUINTTYPL, mask);
+			giu_clear(GIUINTHTSELL, mask);
+			irq_set_chip_and_handler(GIU_IRQ(pin),
+						 &giuint_low_irq_chip,
+						 handle_level_irq);
+		}
+		giu_write(GIUINTSTATL, mask);
+	} else if (pin < GIUINT_HIGH_MAX) {
+		mask = 1 << (pin - GIUINT_HIGH_OFFSET);
+		if (trigger != IRQ_TRIGGER_LEVEL) {
+			giu_set(GIUINTTYPH, mask);
+			if (signal == IRQ_SIGNAL_HOLD)
+				giu_set(GIUINTHTSELH, mask);
+			else
+				giu_clear(GIUINTHTSELH, mask);
+			if (giu_flags & GPIO_HAS_INTERRUPT_EDGE_SELECT) {
+				switch (trigger) {
+				case IRQ_TRIGGER_EDGE_FALLING:
+					giu_set(GIUFEDGEINHH, mask);
+					giu_clear(GIUREDGEINHH, mask);
+					break;
+				case IRQ_TRIGGER_EDGE_RISING:
+					giu_clear(GIUFEDGEINHH, mask);
+					giu_set(GIUREDGEINHH, mask);
+					break;
+				default:
+					giu_set(GIUFEDGEINHH, mask);
+					giu_set(GIUREDGEINHH, mask);
+					break;
+				}
+			}
+			irq_set_chip_and_handler(GIU_IRQ(pin),
+						 &giuint_high_irq_chip,
+						 handle_edge_irq);
+		} else {
+			giu_clear(GIUINTTYPH, mask);
+			giu_clear(GIUINTHTSELH, mask);
+			irq_set_chip_and_handler(GIU_IRQ(pin),
+						 &giuint_high_irq_chip,
+						 handle_level_irq);
+		}
+		giu_write(GIUINTSTATH, mask);
+	}
+}
+EXPORT_SYMBOL_GPL(vr41xx_set_irq_trigger);
+
+void vr41xx_set_irq_level(unsigned int pin, irq_level_t level)
+{
+	u16 mask;
+
+	if (pin < GIUINT_HIGH_OFFSET) {
+		mask = 1 << pin;
+		if (level == IRQ_LEVEL_HIGH)
+			giu_set(GIUINTALSELL, mask);
+		else
+			giu_clear(GIUINTALSELL, mask);
+		giu_write(GIUINTSTATL, mask);
+	} else if (pin < GIUINT_HIGH_MAX) {
+		mask = 1 << (pin - GIUINT_HIGH_OFFSET);
+		if (level == IRQ_LEVEL_HIGH)
+			giu_set(GIUINTALSELH, mask);
+		else
+			giu_clear(GIUINTALSELH, mask);
+		giu_write(GIUINTSTATH, mask);
+	}
+}
+EXPORT_SYMBOL_GPL(vr41xx_set_irq_level);
+
+static int giu_set_direction(struct gpio_chip *chip, unsigned pin, int dir)
+{
+	u16 offset, mask, reg;
+	unsigned long flags;
+
+	if (pin >= chip->ngpio)
+		return -EINVAL;
+
+	if (pin < 16) {
+		offset = GIUIOSELL;
+		mask = 1 << pin;
+	} else if (pin < 32) {
+		offset = GIUIOSELH;
+		mask = 1 << (pin - 16);
+	} else {
+		if (giu_flags & GPIO_HAS_OUTPUT_ENABLE) {
+			offset = GIUPODATEN;
+			mask = 1 << (pin - 32);
+		} else {
+			switch (pin) {
+			case 48:
+				offset = GIUPODATH;
+				mask = PIOEN0;
+				break;
+			case 49:
+				offset = GIUPODATH;
+				mask = PIOEN1;
+				break;
+			default:
+				return -EINVAL;
+			}
+		}
+	}
+
+	spin_lock_irqsave(&giu_lock, flags);
+
+	reg = giu_read(offset);
+	if (dir == GPIO_OUTPUT)
+		reg |= mask;
+	else
+		reg &= ~mask;
+	giu_write(offset, reg);
+
+	spin_unlock_irqrestore(&giu_lock, flags);
+
+	return 0;
+}
+
+static int vr41xx_gpio_get(struct gpio_chip *chip, unsigned pin)
+{
+	u16 reg, mask;
+
+	if (pin >= chip->ngpio)
+		return -EINVAL;
+
+	if (pin < 16) {
+		reg = giu_read(GIUPIODL);
+		mask = 1 << pin;
+	} else if (pin < 32) {
+		reg = giu_read(GIUPIODH);
+		mask = 1 << (pin - 16);
+	} else if (pin < 48) {
+		reg = giu_read(GIUPODATL);
+		mask = 1 << (pin - 32);
+	} else {
+		reg = giu_read(GIUPODATH);
+		mask = 1 << (pin - 48);
+	}
+
+	if (reg & mask)
+		return 1;
+
+	return 0;
+}
+
+static void vr41xx_gpio_set(struct gpio_chip *chip, unsigned pin,
+			    int value)
+{
+	u16 offset, mask, reg;
+	unsigned long flags;
+
+	if (pin >= chip->ngpio)
+		return;
+
+	if (pin < 16) {
+		offset = GIUPIODL;
+		mask = 1 << pin;
+	} else if (pin < 32) {
+		offset = GIUPIODH;
+		mask = 1 << (pin - 16);
+	} else if (pin < 48) {
+		offset = GIUPODATL;
+		mask = 1 << (pin - 32);
+	} else {
+		offset = GIUPODATH;
+		mask = 1 << (pin - 48);
+	}
+
+	spin_lock_irqsave(&giu_lock, flags);
+
+	reg = giu_read(offset);
+	if (value)
+		reg |= mask;
+	else
+		reg &= ~mask;
+	giu_write(offset, reg);
+
+	spin_unlock_irqrestore(&giu_lock, flags);
+}
+
+
+static int vr41xx_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	return giu_set_direction(chip, offset, GPIO_INPUT);
+}
+
+static int vr41xx_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
+				int value)
+{
+	vr41xx_gpio_set(chip, offset, value);
+
+	return giu_set_direction(chip, offset, GPIO_OUTPUT);
+}
+
+static int vr41xx_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	if (offset >= chip->ngpio)
+		return -EINVAL;
+
+	return GIU_IRQ_BASE + offset;
+}
+
+static struct gpio_chip vr41xx_gpio_chip = {
+	.label			= "vr41xx",
+	.owner			= THIS_MODULE,
+	.direction_input	= vr41xx_gpio_direction_input,
+	.get			= vr41xx_gpio_get,
+	.direction_output	= vr41xx_gpio_direction_output,
+	.set			= vr41xx_gpio_set,
+	.to_irq			= vr41xx_gpio_to_irq,
+};
+
+static int giu_probe(struct platform_device *pdev)
+{
+	unsigned int trigger, i, pin;
+	struct irq_chip *chip;
+	int irq;
+
+	switch (pdev->id) {
+	case GPIO_50PINS_PULLUPDOWN:
+		giu_flags = GPIO_HAS_PULLUPDOWN_IO;
+		vr41xx_gpio_chip.ngpio = 50;
+		break;
+	case GPIO_36PINS:
+		vr41xx_gpio_chip.ngpio = 36;
+		break;
+	case GPIO_48PINS_EDGE_SELECT:
+		giu_flags = GPIO_HAS_INTERRUPT_EDGE_SELECT;
+		vr41xx_gpio_chip.ngpio = 48;
+		break;
+	default:
+		dev_err(&pdev->dev, "GIU: unknown ID %d\n", pdev->id);
+		return -ENODEV;
+	}
+
+	giu_base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(giu_base))
+		return PTR_ERR(giu_base);
+
+	vr41xx_gpio_chip.parent = &pdev->dev;
+
+	if (gpiochip_add_data(&vr41xx_gpio_chip, NULL))
+		return -ENODEV;
+
+	giu_write(GIUINTENL, 0);
+	giu_write(GIUINTENH, 0);
+
+	trigger = giu_read(GIUINTTYPH) << 16;
+	trigger |= giu_read(GIUINTTYPL);
+	for (i = GIU_IRQ_BASE; i <= GIU_IRQ_LAST; i++) {
+		pin = GPIO_PIN_OF_IRQ(i);
+		if (pin < GIUINT_HIGH_OFFSET)
+			chip = &giuint_low_irq_chip;
+		else
+			chip = &giuint_high_irq_chip;
+
+		if (trigger & (1 << pin))
+			irq_set_chip_and_handler(i, chip, handle_edge_irq);
+		else
+			irq_set_chip_and_handler(i, chip, handle_level_irq);
+
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0 || irq >= nr_irqs)
+		return -EBUSY;
+
+	return cascade_irq(irq, giu_get_irq);
+}
+
+static int giu_remove(struct platform_device *pdev)
+{
+	if (giu_base) {
+		giu_base = NULL;
+	}
+
+	return 0;
+}
+
+static struct platform_driver giu_device_driver = {
+	.probe		= giu_probe,
+	.remove		= giu_remove,
+	.driver		= {
+		.name	= "GIU",
+	},
+};
+
+module_platform_driver(giu_device_driver);
diff --git a/drivers/gpio/gpio-vx855.c b/drivers/gpio/gpio-vx855.c
new file mode 100644
index 000000000..3bf397b8d
--- /dev/null
+++ b/drivers/gpio/gpio-vx855.c
@@ -0,0 +1,285 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Linux GPIOlib driver for the VIA VX855 integrated southbridge GPIO
+ *
+ * Copyright (C) 2009 VIA Technologies, Inc.
+ * Copyright (C) 2010 One Laptop per Child
+ * Author: Harald Welte <HaraldWelte@viatech.com>
+ * All rights reserved.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/gpio/driver.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/io.h>
+
+#define MODULE_NAME "vx855_gpio"
+
+/* The VX855 south bridge has the following GPIO pins:
+ *	GPI 0...13	General Purpose Input
+ *	GPO 0...12	General Purpose Output
+ *	GPIO 0...14	General Purpose I/O (Open-Drain)
+ */
+
+#define NR_VX855_GPI	14
+#define NR_VX855_GPO	13
+#define NR_VX855_GPIO	15
+
+#define NR_VX855_GPInO	(NR_VX855_GPI + NR_VX855_GPO)
+#define NR_VX855_GP	(NR_VX855_GPI + NR_VX855_GPO + NR_VX855_GPIO)
+
+struct vx855_gpio {
+	struct gpio_chip gpio;
+	spinlock_t lock;
+	u32 io_gpi;
+	u32 io_gpo;
+};
+
+/* resolve a GPIx into the corresponding bit position */
+static inline u_int32_t gpi_i_bit(int i)
+{
+	if (i < 10)
+		return 1 << i;
+	else
+		return 1 << (i + 14);
+}
+
+static inline u_int32_t gpo_o_bit(int i)
+{
+	if (i < 11)
+		return 1 << i;
+	else
+		return 1 << (i + 14);
+}
+
+static inline u_int32_t gpio_i_bit(int i)
+{
+	if (i < 14)
+		return 1 << (i + 10);
+	else
+		return 1 << (i + 14);
+}
+
+static inline u_int32_t gpio_o_bit(int i)
+{
+	if (i < 14)
+		return 1 << (i + 11);
+	else
+		return 1 << (i + 13);
+}
+
+/* Mapping between numeric GPIO ID and the actual GPIO hardware numbering:
+ * 0..13	GPI 0..13
+ * 14..26	GPO 0..12
+ * 27..41	GPIO 0..14
+ */
+
+static int vx855gpio_direction_input(struct gpio_chip *gpio,
+				     unsigned int nr)
+{
+	struct vx855_gpio *vg = gpiochip_get_data(gpio);
+	unsigned long flags;
+	u_int32_t reg_out;
+
+	/* Real GPI bits are always in input direction */
+	if (nr < NR_VX855_GPI)
+		return 0;
+
+	/* Real GPO bits cannot be put in output direction */
+	if (nr < NR_VX855_GPInO)
+		return -EINVAL;
+
+	/* Open Drain GPIO have to be set to one */
+	spin_lock_irqsave(&vg->lock, flags);
+	reg_out = inl(vg->io_gpo);
+	reg_out |= gpio_o_bit(nr - NR_VX855_GPInO);
+	outl(reg_out, vg->io_gpo);
+	spin_unlock_irqrestore(&vg->lock, flags);
+
+	return 0;
+}
+
+static int vx855gpio_get(struct gpio_chip *gpio, unsigned int nr)
+{
+	struct vx855_gpio *vg = gpiochip_get_data(gpio);
+	u_int32_t reg_in;
+	int ret = 0;
+
+	if (nr < NR_VX855_GPI) {
+		reg_in = inl(vg->io_gpi);
+		if (reg_in & gpi_i_bit(nr))
+			ret = 1;
+	} else if (nr < NR_VX855_GPInO) {
+		/* GPO don't have an input bit, we need to read it
+		 * back from the output register */
+		reg_in = inl(vg->io_gpo);
+		if (reg_in & gpo_o_bit(nr - NR_VX855_GPI))
+			ret = 1;
+	} else {
+		reg_in = inl(vg->io_gpi);
+		if (reg_in & gpio_i_bit(nr - NR_VX855_GPInO))
+			ret = 1;
+	}
+
+	return ret;
+}
+
+static void vx855gpio_set(struct gpio_chip *gpio, unsigned int nr,
+			  int val)
+{
+	struct vx855_gpio *vg = gpiochip_get_data(gpio);
+	unsigned long flags;
+	u_int32_t reg_out;
+
+	/* True GPI cannot be switched to output mode */
+	if (nr < NR_VX855_GPI)
+		return;
+
+	spin_lock_irqsave(&vg->lock, flags);
+	reg_out = inl(vg->io_gpo);
+	if (nr < NR_VX855_GPInO) {
+		if (val)
+			reg_out |= gpo_o_bit(nr - NR_VX855_GPI);
+		else
+			reg_out &= ~gpo_o_bit(nr - NR_VX855_GPI);
+	} else {
+		if (val)
+			reg_out |= gpio_o_bit(nr - NR_VX855_GPInO);
+		else
+			reg_out &= ~gpio_o_bit(nr - NR_VX855_GPInO);
+	}
+	outl(reg_out, vg->io_gpo);
+	spin_unlock_irqrestore(&vg->lock, flags);
+}
+
+static int vx855gpio_direction_output(struct gpio_chip *gpio,
+				      unsigned int nr, int val)
+{
+	/* True GPI cannot be switched to output mode */
+	if (nr < NR_VX855_GPI)
+		return -EINVAL;
+
+	/* True GPO don't need to be switched to output mode,
+	 * and GPIO are open-drain, i.e. also need no switching,
+	 * so all we do is set the level */
+	vx855gpio_set(gpio, nr, val);
+
+	return 0;
+}
+
+static int vx855gpio_set_config(struct gpio_chip *gpio, unsigned int nr,
+				unsigned long config)
+{
+	enum pin_config_param param = pinconf_to_config_param(config);
+
+	/* The GPI cannot be single-ended */
+	if (nr < NR_VX855_GPI)
+		return -EINVAL;
+
+	/* The GPO's are push-pull */
+	if (nr < NR_VX855_GPInO) {
+		if (param != PIN_CONFIG_DRIVE_PUSH_PULL)
+			return -ENOTSUPP;
+		return 0;
+	}
+
+	/* The GPIO's are open drain */
+	if (param != PIN_CONFIG_DRIVE_OPEN_DRAIN)
+		return -ENOTSUPP;
+
+	return 0;
+}
+
+static const char *vx855gpio_names[NR_VX855_GP] = {
+	"VX855_GPI0", "VX855_GPI1", "VX855_GPI2", "VX855_GPI3", "VX855_GPI4",
+	"VX855_GPI5", "VX855_GPI6", "VX855_GPI7", "VX855_GPI8", "VX855_GPI9",
+	"VX855_GPI10", "VX855_GPI11", "VX855_GPI12", "VX855_GPI13",
+	"VX855_GPO0", "VX855_GPO1", "VX855_GPO2", "VX855_GPO3", "VX855_GPO4",
+	"VX855_GPO5", "VX855_GPO6", "VX855_GPO7", "VX855_GPO8", "VX855_GPO9",
+	"VX855_GPO10", "VX855_GPO11", "VX855_GPO12",
+	"VX855_GPIO0", "VX855_GPIO1", "VX855_GPIO2", "VX855_GPIO3",
+	"VX855_GPIO4", "VX855_GPIO5", "VX855_GPIO6", "VX855_GPIO7",
+	"VX855_GPIO8", "VX855_GPIO9", "VX855_GPIO10", "VX855_GPIO11",
+	"VX855_GPIO12", "VX855_GPIO13", "VX855_GPIO14"
+};
+
+static void vx855gpio_gpio_setup(struct vx855_gpio *vg)
+{
+	struct gpio_chip *c = &vg->gpio;
+
+	c->label = "VX855 South Bridge";
+	c->owner = THIS_MODULE;
+	c->direction_input = vx855gpio_direction_input;
+	c->direction_output = vx855gpio_direction_output;
+	c->get = vx855gpio_get;
+	c->set = vx855gpio_set;
+	c->set_config = vx855gpio_set_config,
+	c->dbg_show = NULL;
+	c->base = 0;
+	c->ngpio = NR_VX855_GP;
+	c->can_sleep = false;
+	c->names = vx855gpio_names;
+}
+
+/* This platform device is ordinarily registered by the vx855 mfd driver */
+static int vx855gpio_probe(struct platform_device *pdev)
+{
+	struct resource *res_gpi;
+	struct resource *res_gpo;
+	struct vx855_gpio *vg;
+
+	res_gpi = platform_get_resource(pdev, IORESOURCE_IO, 0);
+	res_gpo = platform_get_resource(pdev, IORESOURCE_IO, 1);
+	if (!res_gpi || !res_gpo)
+		return -EBUSY;
+
+	vg = devm_kzalloc(&pdev->dev, sizeof(*vg), GFP_KERNEL);
+	if (!vg)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, vg);
+
+	dev_info(&pdev->dev, "found VX855 GPIO controller\n");
+	vg->io_gpi = res_gpi->start;
+	vg->io_gpo = res_gpo->start;
+	spin_lock_init(&vg->lock);
+
+	/*
+	 * A single byte is used to control various GPIO ports on the VX855,
+	 * and in the case of the OLPC XO-1.5, some of those ports are used
+	 * for switches that are interpreted and exposed through ACPI. ACPI
+	 * will have reserved the region, so our own reservation will not
+	 * succeed. Ignore and continue.
+	 */
+
+	if (!devm_request_region(&pdev->dev, res_gpi->start,
+				 resource_size(res_gpi), MODULE_NAME "_gpi"))
+		dev_warn(&pdev->dev,
+			"GPI I/O resource busy, probably claimed by ACPI\n");
+
+	if (!devm_request_region(&pdev->dev, res_gpo->start,
+				 resource_size(res_gpo), MODULE_NAME "_gpo"))
+		dev_warn(&pdev->dev,
+			"GPO I/O resource busy, probably claimed by ACPI\n");
+
+	vx855gpio_gpio_setup(vg);
+
+	return devm_gpiochip_add_data(&pdev->dev, &vg->gpio, vg);
+}
+
+static struct platform_driver vx855gpio_driver = {
+	.driver = {
+		.name	= MODULE_NAME,
+	},
+	.probe		= vx855gpio_probe,
+};
+
+module_platform_driver(vx855gpio_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Harald Welte <HaraldWelte@viatech.com>");
+MODULE_DESCRIPTION("GPIO driver for the VIA VX855 chipset");
+MODULE_ALIAS("platform:vx855_gpio");
diff --git a/drivers/gpio/gpio-wcd934x.c b/drivers/gpio/gpio-wcd934x.c
new file mode 100644
index 000000000..97e6caedf
--- /dev/null
+++ b/drivers/gpio/gpio-wcd934x.c
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2019, Linaro Limited
+
+#include <linux/module.h>
+#include <linux/gpio/driver.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/of_device.h>
+
+#define WCD_PIN_MASK(p) BIT(p)
+#define WCD_REG_DIR_CTL_OFFSET 0x42
+#define WCD_REG_VAL_CTL_OFFSET 0x43
+#define WCD934X_NPINS		5
+
+struct wcd_gpio_data {
+	struct regmap *map;
+	struct gpio_chip chip;
+};
+
+static int wcd_gpio_get_direction(struct gpio_chip *chip, unsigned int pin)
+{
+	struct wcd_gpio_data *data = gpiochip_get_data(chip);
+	unsigned int value;
+	int ret;
+
+	ret = regmap_read(data->map, WCD_REG_DIR_CTL_OFFSET, &value);
+	if (ret < 0)
+		return ret;
+
+	if (value & WCD_PIN_MASK(pin))
+		return GPIO_LINE_DIRECTION_OUT;
+
+	return GPIO_LINE_DIRECTION_IN;
+}
+
+static int wcd_gpio_direction_input(struct gpio_chip *chip, unsigned int pin)
+{
+	struct wcd_gpio_data *data = gpiochip_get_data(chip);
+
+	return regmap_update_bits(data->map, WCD_REG_DIR_CTL_OFFSET,
+				  WCD_PIN_MASK(pin), 0);
+}
+
+static int wcd_gpio_direction_output(struct gpio_chip *chip, unsigned int pin,
+				     int val)
+{
+	struct wcd_gpio_data *data = gpiochip_get_data(chip);
+
+	regmap_update_bits(data->map, WCD_REG_DIR_CTL_OFFSET,
+			   WCD_PIN_MASK(pin), WCD_PIN_MASK(pin));
+
+	return regmap_update_bits(data->map, WCD_REG_VAL_CTL_OFFSET,
+				  WCD_PIN_MASK(pin),
+				  val ? WCD_PIN_MASK(pin) : 0);
+}
+
+static int wcd_gpio_get(struct gpio_chip *chip, unsigned int pin)
+{
+	struct wcd_gpio_data *data = gpiochip_get_data(chip);
+	unsigned int value;
+
+	regmap_read(data->map, WCD_REG_VAL_CTL_OFFSET, &value);
+
+	return !!(value & WCD_PIN_MASK(pin));
+}
+
+static void wcd_gpio_set(struct gpio_chip *chip, unsigned int pin, int val)
+{
+	struct wcd_gpio_data *data = gpiochip_get_data(chip);
+
+	regmap_update_bits(data->map, WCD_REG_VAL_CTL_OFFSET,
+			   WCD_PIN_MASK(pin), val ? WCD_PIN_MASK(pin) : 0);
+}
+
+static int wcd_gpio_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct wcd_gpio_data *data;
+	struct gpio_chip *chip;
+
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->map = dev_get_regmap(dev->parent, NULL);
+	if (!data->map) {
+		dev_err(dev, "%s: failed to get regmap\n", __func__);
+		return  -EINVAL;
+	}
+
+	chip = &data->chip;
+	chip->direction_input  = wcd_gpio_direction_input;
+	chip->direction_output = wcd_gpio_direction_output;
+	chip->get_direction = wcd_gpio_get_direction;
+	chip->get = wcd_gpio_get;
+	chip->set = wcd_gpio_set;
+	chip->parent = dev;
+	chip->base = -1;
+	chip->ngpio = WCD934X_NPINS;
+	chip->label = dev_name(dev);
+	chip->of_gpio_n_cells = 2;
+	chip->can_sleep = false;
+
+	return devm_gpiochip_add_data(dev, chip, data);
+}
+
+static const struct of_device_id wcd_gpio_of_match[] = {
+	{ .compatible = "qcom,wcd9340-gpio" },
+	{ .compatible = "qcom,wcd9341-gpio" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, wcd_gpio_of_match);
+
+static struct platform_driver wcd_gpio_driver = {
+	.driver = {
+		   .name = "wcd934x-gpio",
+		   .of_match_table = wcd_gpio_of_match,
+	},
+	.probe = wcd_gpio_probe,
+};
+
+module_platform_driver(wcd_gpio_driver);
+MODULE_DESCRIPTION("Qualcomm Technologies, Inc WCD GPIO control driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-wcove.c b/drivers/gpio/gpio-wcove.c
new file mode 100644
index 000000000..b5fbba5a7
--- /dev/null
+++ b/drivers/gpio/gpio-wcove.c
@@ -0,0 +1,508 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Intel Whiskey Cove PMIC GPIO Driver
+ *
+ * This driver is written based on gpio-crystalcove.c
+ *
+ * Copyright (C) 2016 Intel Corporation. All rights reserved.
+ */
+
+#include <linux/bitops.h>
+#include <linux/gpio/driver.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/intel_soc_pmic.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/seq_file.h>
+
+/*
+ * Whiskey Cove PMIC has 13 physical GPIO pins divided into 3 banks:
+ * Bank 0: Pin  0 - 6
+ * Bank 1: Pin  7 - 10
+ * Bank 2: Pin 11 - 12
+ * Each pin has one output control register and one input control register.
+ */
+#define BANK0_NR_PINS		7
+#define BANK1_NR_PINS		4
+#define BANK2_NR_PINS		2
+#define WCOVE_GPIO_NUM		(BANK0_NR_PINS + BANK1_NR_PINS + BANK2_NR_PINS)
+#define WCOVE_VGPIO_NUM		94
+/* GPIO output control registers (one per pin): 0x4e44 - 0x4e50 */
+#define GPIO_OUT_CTRL_BASE	0x4e44
+/* GPIO input control registers (one per pin): 0x4e51 - 0x4e5d */
+#define GPIO_IN_CTRL_BASE	0x4e51
+
+/*
+ * GPIO interrupts are organized in two groups:
+ * Group 0: Bank 0 pins (Pin 0 - 6)
+ * Group 1: Bank 1 and Bank 2 pins (Pin 7 - 12)
+ * Each group has two registers (one bit per pin): status and mask.
+ */
+#define GROUP0_NR_IRQS		7
+#define GROUP1_NR_IRQS		6
+#define IRQ_MASK_BASE		0x4e19
+#define IRQ_STATUS_BASE		0x4e0b
+#define GPIO_IRQ0_MASK		GENMASK(6, 0)
+#define GPIO_IRQ1_MASK		GENMASK(5, 0)
+#define UPDATE_IRQ_TYPE		BIT(0)
+#define UPDATE_IRQ_MASK		BIT(1)
+
+#define CTLI_INTCNT_DIS		(0 << 1)
+#define CTLI_INTCNT_NE		(1 << 1)
+#define CTLI_INTCNT_PE		(2 << 1)
+#define CTLI_INTCNT_BE		(3 << 1)
+
+#define CTLO_DIR_IN		(0 << 5)
+#define CTLO_DIR_OUT		(1 << 5)
+
+#define CTLO_DRV_MASK		(1 << 4)
+#define CTLO_DRV_OD		(0 << 4)
+#define CTLO_DRV_CMOS		(1 << 4)
+
+#define CTLO_DRV_REN		(1 << 3)
+
+#define CTLO_RVAL_2KDOWN	(0 << 1)
+#define CTLO_RVAL_2KUP		(1 << 1)
+#define CTLO_RVAL_50KDOWN	(2 << 1)
+#define CTLO_RVAL_50KUP		(3 << 1)
+
+#define CTLO_INPUT_SET		(CTLO_DRV_CMOS | CTLO_DRV_REN | CTLO_RVAL_2KUP)
+#define CTLO_OUTPUT_SET		(CTLO_DIR_OUT | CTLO_INPUT_SET)
+
+enum ctrl_register {
+	CTRL_IN,
+	CTRL_OUT,
+};
+
+/*
+ * struct wcove_gpio - Whiskey Cove GPIO controller
+ * @buslock: for bus lock/sync and unlock.
+ * @chip: the abstract gpio_chip structure.
+ * @dev: the gpio device
+ * @regmap: the regmap from the parent device.
+ * @regmap_irq_chip: the regmap of the gpio irq chip.
+ * @update: pending IRQ setting update, to be written to the chip upon unlock.
+ * @intcnt: the Interrupt Detect value to be written.
+ * @set_irq_mask: true if the IRQ mask needs to be set, false to clear.
+ */
+struct wcove_gpio {
+	struct mutex buslock;
+	struct gpio_chip chip;
+	struct device *dev;
+	struct regmap *regmap;
+	struct regmap_irq_chip_data *regmap_irq_chip;
+	int update;
+	int intcnt;
+	bool set_irq_mask;
+};
+
+static inline int to_reg(int gpio, enum ctrl_register reg_type)
+{
+	unsigned int reg;
+
+	if (gpio >= WCOVE_GPIO_NUM)
+		return -EOPNOTSUPP;
+
+	if (reg_type == CTRL_IN)
+		reg = GPIO_IN_CTRL_BASE + gpio;
+	else
+		reg = GPIO_OUT_CTRL_BASE + gpio;
+
+	return reg;
+}
+
+static void wcove_update_irq_mask(struct wcove_gpio *wg, int gpio)
+{
+	unsigned int reg, mask;
+
+	if (gpio < GROUP0_NR_IRQS) {
+		reg = IRQ_MASK_BASE;
+		mask = BIT(gpio % GROUP0_NR_IRQS);
+	} else {
+		reg = IRQ_MASK_BASE + 1;
+		mask = BIT((gpio - GROUP0_NR_IRQS) % GROUP1_NR_IRQS);
+	}
+
+	if (wg->set_irq_mask)
+		regmap_update_bits(wg->regmap, reg, mask, mask);
+	else
+		regmap_update_bits(wg->regmap, reg, mask, 0);
+}
+
+static void wcove_update_irq_ctrl(struct wcove_gpio *wg, int gpio)
+{
+	int reg = to_reg(gpio, CTRL_IN);
+
+	if (reg < 0)
+		return;
+
+	regmap_update_bits(wg->regmap, reg, CTLI_INTCNT_BE, wg->intcnt);
+}
+
+static int wcove_gpio_dir_in(struct gpio_chip *chip, unsigned int gpio)
+{
+	struct wcove_gpio *wg = gpiochip_get_data(chip);
+	int reg = to_reg(gpio, CTRL_OUT);
+
+	if (reg < 0)
+		return 0;
+
+	return regmap_write(wg->regmap, reg, CTLO_INPUT_SET);
+}
+
+static int wcove_gpio_dir_out(struct gpio_chip *chip, unsigned int gpio,
+				    int value)
+{
+	struct wcove_gpio *wg = gpiochip_get_data(chip);
+	int reg = to_reg(gpio, CTRL_OUT);
+
+	if (reg < 0)
+		return 0;
+
+	return regmap_write(wg->regmap, reg, CTLO_OUTPUT_SET | value);
+}
+
+static int wcove_gpio_get_direction(struct gpio_chip *chip, unsigned int gpio)
+{
+	struct wcove_gpio *wg = gpiochip_get_data(chip);
+	unsigned int val;
+	int ret, reg = to_reg(gpio, CTRL_OUT);
+
+	if (reg < 0)
+		return GPIO_LINE_DIRECTION_OUT;
+
+	ret = regmap_read(wg->regmap, reg, &val);
+	if (ret)
+		return ret;
+
+	if (val & CTLO_DIR_OUT)
+		return GPIO_LINE_DIRECTION_OUT;
+
+	return GPIO_LINE_DIRECTION_IN;
+}
+
+static int wcove_gpio_get(struct gpio_chip *chip, unsigned int gpio)
+{
+	struct wcove_gpio *wg = gpiochip_get_data(chip);
+	unsigned int val;
+	int ret, reg = to_reg(gpio, CTRL_IN);
+
+	if (reg < 0)
+		return 0;
+
+	ret = regmap_read(wg->regmap, reg, &val);
+	if (ret)
+		return ret;
+
+	return val & 0x1;
+}
+
+static void wcove_gpio_set(struct gpio_chip *chip, unsigned int gpio, int value)
+{
+	struct wcove_gpio *wg = gpiochip_get_data(chip);
+	int reg = to_reg(gpio, CTRL_OUT);
+
+	if (reg < 0)
+		return;
+
+	if (value)
+		regmap_update_bits(wg->regmap, reg, 1, 1);
+	else
+		regmap_update_bits(wg->regmap, reg, 1, 0);
+}
+
+static int wcove_gpio_set_config(struct gpio_chip *chip, unsigned int gpio,
+				 unsigned long config)
+{
+	struct wcove_gpio *wg = gpiochip_get_data(chip);
+	int reg = to_reg(gpio, CTRL_OUT);
+
+	if (reg < 0)
+		return 0;
+
+	switch (pinconf_to_config_param(config)) {
+	case PIN_CONFIG_DRIVE_OPEN_DRAIN:
+		return regmap_update_bits(wg->regmap, reg, CTLO_DRV_MASK,
+					  CTLO_DRV_OD);
+	case PIN_CONFIG_DRIVE_PUSH_PULL:
+		return regmap_update_bits(wg->regmap, reg, CTLO_DRV_MASK,
+					  CTLO_DRV_CMOS);
+	default:
+		break;
+	}
+
+	return -ENOTSUPP;
+}
+
+static int wcove_irq_type(struct irq_data *data, unsigned int type)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+	struct wcove_gpio *wg = gpiochip_get_data(chip);
+
+	if (data->hwirq >= WCOVE_GPIO_NUM)
+		return 0;
+
+	switch (type) {
+	case IRQ_TYPE_NONE:
+		wg->intcnt = CTLI_INTCNT_DIS;
+		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		wg->intcnt = CTLI_INTCNT_BE;
+		break;
+	case IRQ_TYPE_EDGE_RISING:
+		wg->intcnt = CTLI_INTCNT_PE;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		wg->intcnt = CTLI_INTCNT_NE;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	wg->update |= UPDATE_IRQ_TYPE;
+
+	return 0;
+}
+
+static void wcove_bus_lock(struct irq_data *data)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+	struct wcove_gpio *wg = gpiochip_get_data(chip);
+
+	mutex_lock(&wg->buslock);
+}
+
+static void wcove_bus_sync_unlock(struct irq_data *data)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+	struct wcove_gpio *wg = gpiochip_get_data(chip);
+	int gpio = data->hwirq;
+
+	if (wg->update & UPDATE_IRQ_TYPE)
+		wcove_update_irq_ctrl(wg, gpio);
+	if (wg->update & UPDATE_IRQ_MASK)
+		wcove_update_irq_mask(wg, gpio);
+	wg->update = 0;
+
+	mutex_unlock(&wg->buslock);
+}
+
+static void wcove_irq_unmask(struct irq_data *data)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+	struct wcove_gpio *wg = gpiochip_get_data(chip);
+
+	if (data->hwirq >= WCOVE_GPIO_NUM)
+		return;
+
+	wg->set_irq_mask = false;
+	wg->update |= UPDATE_IRQ_MASK;
+}
+
+static void wcove_irq_mask(struct irq_data *data)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+	struct wcove_gpio *wg = gpiochip_get_data(chip);
+
+	if (data->hwirq >= WCOVE_GPIO_NUM)
+		return;
+
+	wg->set_irq_mask = true;
+	wg->update |= UPDATE_IRQ_MASK;
+}
+
+static struct irq_chip wcove_irqchip = {
+	.name			= "Whiskey Cove",
+	.irq_mask		= wcove_irq_mask,
+	.irq_unmask		= wcove_irq_unmask,
+	.irq_set_type		= wcove_irq_type,
+	.irq_bus_lock		= wcove_bus_lock,
+	.irq_bus_sync_unlock	= wcove_bus_sync_unlock,
+};
+
+static irqreturn_t wcove_gpio_irq_handler(int irq, void *data)
+{
+	struct wcove_gpio *wg = (struct wcove_gpio *)data;
+	unsigned int pending, virq, gpio, mask, offset;
+	u8 p[2];
+
+	if (regmap_bulk_read(wg->regmap, IRQ_STATUS_BASE, p, 2)) {
+		dev_err(wg->dev, "Failed to read irq status register\n");
+		return IRQ_NONE;
+	}
+
+	pending = (p[0] & GPIO_IRQ0_MASK) | ((p[1] & GPIO_IRQ1_MASK) << 7);
+	if (!pending)
+		return IRQ_NONE;
+
+	/* Iterate until no interrupt is pending */
+	while (pending) {
+		/* One iteration is for all pending bits */
+		for_each_set_bit(gpio, (const unsigned long *)&pending,
+						 WCOVE_GPIO_NUM) {
+			offset = (gpio > GROUP0_NR_IRQS) ? 1 : 0;
+			mask = (offset == 1) ? BIT(gpio - GROUP0_NR_IRQS) :
+								BIT(gpio);
+			virq = irq_find_mapping(wg->chip.irq.domain, gpio);
+			handle_nested_irq(virq);
+			regmap_update_bits(wg->regmap, IRQ_STATUS_BASE + offset,
+								mask, mask);
+		}
+
+		/* Next iteration */
+		if (regmap_bulk_read(wg->regmap, IRQ_STATUS_BASE, p, 2)) {
+			dev_err(wg->dev, "Failed to read irq status\n");
+			break;
+		}
+
+		pending = (p[0] & GPIO_IRQ0_MASK) | ((p[1] & GPIO_IRQ1_MASK) << 7);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void wcove_gpio_dbg_show(struct seq_file *s,
+				      struct gpio_chip *chip)
+{
+	unsigned int ctlo, ctli, irq_mask, irq_status;
+	struct wcove_gpio *wg = gpiochip_get_data(chip);
+	int gpio, offset, group, ret = 0;
+
+	for (gpio = 0; gpio < WCOVE_GPIO_NUM; gpio++) {
+		group = gpio < GROUP0_NR_IRQS ? 0 : 1;
+		ret += regmap_read(wg->regmap, to_reg(gpio, CTRL_OUT), &ctlo);
+		ret += regmap_read(wg->regmap, to_reg(gpio, CTRL_IN), &ctli);
+		ret += regmap_read(wg->regmap, IRQ_MASK_BASE + group,
+							&irq_mask);
+		ret += regmap_read(wg->regmap, IRQ_STATUS_BASE + group,
+							&irq_status);
+		if (ret) {
+			pr_err("Failed to read registers: ctrl out/in or irq status/mask\n");
+			break;
+		}
+
+		offset = gpio % 8;
+		seq_printf(s, " gpio-%-2d %s %s %s %s ctlo=%2x,%s %s\n",
+			   gpio, ctlo & CTLO_DIR_OUT ? "out" : "in ",
+			   ctli & 0x1 ? "hi" : "lo",
+			   ctli & CTLI_INTCNT_NE ? "fall" : "    ",
+			   ctli & CTLI_INTCNT_PE ? "rise" : "    ",
+			   ctlo,
+			   irq_mask & BIT(offset) ? "mask  " : "unmask",
+			   irq_status & BIT(offset) ? "pending" : "       ");
+	}
+}
+
+static int wcove_gpio_probe(struct platform_device *pdev)
+{
+	struct intel_soc_pmic *pmic;
+	struct wcove_gpio *wg;
+	int virq, ret, irq;
+	struct device *dev;
+	struct gpio_irq_chip *girq;
+
+	/*
+	 * This gpio platform device is created by a mfd device (see
+	 * drivers/mfd/intel_soc_pmic_bxtwc.c for details). Information
+	 * shared by all sub-devices created by the mfd device, the regmap
+	 * pointer for instance, is stored as driver data of the mfd device
+	 * driver.
+	 */
+	pmic = dev_get_drvdata(pdev->dev.parent);
+	if (!pmic)
+		return -ENODEV;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	dev = &pdev->dev;
+
+	wg = devm_kzalloc(dev, sizeof(*wg), GFP_KERNEL);
+	if (!wg)
+		return -ENOMEM;
+
+	wg->regmap_irq_chip = pmic->irq_chip_data;
+
+	platform_set_drvdata(pdev, wg);
+
+	mutex_init(&wg->buslock);
+	wg->chip.label = KBUILD_MODNAME;
+	wg->chip.direction_input = wcove_gpio_dir_in;
+	wg->chip.direction_output = wcove_gpio_dir_out;
+	wg->chip.get_direction = wcove_gpio_get_direction;
+	wg->chip.get = wcove_gpio_get;
+	wg->chip.set = wcove_gpio_set;
+	wg->chip.set_config = wcove_gpio_set_config,
+	wg->chip.base = -1;
+	wg->chip.ngpio = WCOVE_VGPIO_NUM;
+	wg->chip.can_sleep = true;
+	wg->chip.parent = pdev->dev.parent;
+	wg->chip.dbg_show = wcove_gpio_dbg_show;
+	wg->dev = dev;
+	wg->regmap = pmic->regmap;
+
+	virq = regmap_irq_get_virq(wg->regmap_irq_chip, irq);
+	if (virq < 0) {
+		dev_err(dev, "Failed to get virq by irq %d\n", irq);
+		return virq;
+	}
+
+	girq = &wg->chip.irq;
+	girq->chip = &wcove_irqchip;
+	/* This will let us handle the parent IRQ in the driver */
+	girq->parent_handler = NULL;
+	girq->num_parents = 0;
+	girq->parents = NULL;
+	girq->default_type = IRQ_TYPE_NONE;
+	girq->handler = handle_simple_irq;
+	girq->threaded = true;
+
+	ret = devm_request_threaded_irq(dev, virq, NULL, wcove_gpio_irq_handler,
+					IRQF_ONESHOT, pdev->name, wg);
+	if (ret) {
+		dev_err(dev, "Failed to request irq %d\n", virq);
+		return ret;
+	}
+
+	ret = devm_gpiochip_add_data(dev, &wg->chip, wg);
+	if (ret) {
+		dev_err(dev, "Failed to add gpiochip: %d\n", ret);
+		return ret;
+	}
+
+	/* Enable GPIO0 interrupts */
+	ret = regmap_update_bits(wg->regmap, IRQ_MASK_BASE, GPIO_IRQ0_MASK,
+				 0x00);
+	if (ret)
+		return ret;
+
+	/* Enable GPIO1 interrupts */
+	ret = regmap_update_bits(wg->regmap, IRQ_MASK_BASE + 1, GPIO_IRQ1_MASK,
+				 0x00);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+/*
+ * Whiskey Cove PMIC itself is a analog device(but with digital control
+ * interface) providing power management support for other devices in
+ * the accompanied SoC, so we have no .pm for Whiskey Cove GPIO driver.
+ */
+static struct platform_driver wcove_gpio_driver = {
+	.driver = {
+		.name = "bxt_wcove_gpio",
+	},
+	.probe = wcove_gpio_probe,
+};
+
+module_platform_driver(wcove_gpio_driver);
+
+MODULE_AUTHOR("Ajay Thomas <ajay.thomas.david.rajamanickam@intel.com>");
+MODULE_AUTHOR("Bin Gao <bin.gao@intel.com>");
+MODULE_DESCRIPTION("Intel Whiskey Cove GPIO Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:bxt_wcove_gpio");
diff --git a/drivers/gpio/gpio-winbond.c b/drivers/gpio/gpio-winbond.c
new file mode 100644
index 000000000..4b61d975c
--- /dev/null
+++ b/drivers/gpio/gpio-winbond.c
@@ -0,0 +1,733 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * GPIO interface for Winbond Super I/O chips
+ * Currently, only W83627UHG (Nuvoton NCT6627UD) is supported.
+ *
+ * Author: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/gpio/driver.h>
+#include <linux/ioport.h>
+#include <linux/isa.h>
+#include <linux/module.h>
+
+#define WB_GPIO_DRIVER_NAME		KBUILD_MODNAME
+
+#define WB_SIO_BASE			0x2e
+#define WB_SIO_BASE_HIGH		0x4e
+
+#define WB_SIO_EXT_ENTER_KEY		0x87
+#define WB_SIO_EXT_EXIT_KEY		0xaa
+
+/* global chip registers */
+
+#define WB_SIO_REG_LOGICAL		0x07
+
+#define WB_SIO_REG_CHIP_MSB		0x20
+#define WB_SIO_REG_CHIP_LSB		0x21
+
+#define WB_SIO_CHIP_ID_W83627UHG	0xa230
+#define WB_SIO_CHIP_ID_W83627UHG_MASK	GENMASK(15, 4)
+
+#define WB_SIO_REG_DPD			0x22
+#define WB_SIO_REG_DPD_UARTA		4
+#define WB_SIO_REG_DPD_UARTB		5
+
+#define WB_SIO_REG_IDPD		0x23
+#define WB_SIO_REG_IDPD_UARTC		4
+#define WB_SIO_REG_IDPD_UARTD		5
+#define WB_SIO_REG_IDPD_UARTE		6
+#define WB_SIO_REG_IDPD_UARTF		7
+
+#define WB_SIO_REG_GLOBAL_OPT		0x24
+#define WB_SIO_REG_GO_ENFDC		1
+
+#define WB_SIO_REG_OVTGPIO3456		0x29
+#define WB_SIO_REG_OG3456_G3PP		3
+#define WB_SIO_REG_OG3456_G4PP		4
+#define WB_SIO_REG_OG3456_G5PP		5
+#define WB_SIO_REG_OG3456_G6PP		7
+
+#define WB_SIO_REG_I2C_PS		0x2a
+#define WB_SIO_REG_I2CPS_I2CFS		1
+
+#define WB_SIO_REG_GPIO1_MF		0x2c
+#define WB_SIO_REG_G1MF_G1PP		6
+#define WB_SIO_REG_G1MF_G2PP		7
+#define WB_SIO_REG_G1MF_FS_MASK	GENMASK(1, 0)
+#define WB_SIO_REG_G1MF_FS_IR_OFF	0
+#define WB_SIO_REG_G1MF_FS_IR		1
+#define WB_SIO_REG_G1MF_FS_GPIO1	2
+#define WB_SIO_REG_G1MF_FS_UARTB	3
+
+/* not an actual device number, just a value meaning 'no device' */
+#define WB_SIO_DEV_NONE		0xff
+
+/* registers with offsets >= 0x30 are specific for a particular device */
+
+/* UART B logical device */
+#define WB_SIO_DEV_UARTB		0x03
+#define WB_SIO_UARTB_REG_ENABLE	0x30
+#define WB_SIO_UARTB_ENABLE_ON		0
+
+/* UART C logical device */
+#define WB_SIO_DEV_UARTC		0x06
+#define WB_SIO_UARTC_REG_ENABLE	0x30
+#define WB_SIO_UARTC_ENABLE_ON		0
+
+/* GPIO3, GPIO4 logical device */
+#define WB_SIO_DEV_GPIO34		0x07
+#define WB_SIO_GPIO34_REG_ENABLE	0x30
+#define WB_SIO_GPIO34_ENABLE_3		0
+#define WB_SIO_GPIO34_ENABLE_4		1
+#define WB_SIO_GPIO34_REG_IO3		0xe0
+#define WB_SIO_GPIO34_REG_DATA3	0xe1
+#define WB_SIO_GPIO34_REG_INV3		0xe2
+#define WB_SIO_GPIO34_REG_IO4		0xe4
+#define WB_SIO_GPIO34_REG_DATA4	0xe5
+#define WB_SIO_GPIO34_REG_INV4		0xe6
+
+/* WDTO, PLED, GPIO5, GPIO6 logical device */
+#define WB_SIO_DEV_WDGPIO56		0x08
+#define WB_SIO_WDGPIO56_REG_ENABLE	0x30
+#define WB_SIO_WDGPIO56_ENABLE_5	1
+#define WB_SIO_WDGPIO56_ENABLE_6	2
+#define WB_SIO_WDGPIO56_REG_IO5	0xe0
+#define WB_SIO_WDGPIO56_REG_DATA5	0xe1
+#define WB_SIO_WDGPIO56_REG_INV5	0xe2
+#define WB_SIO_WDGPIO56_REG_IO6	0xe4
+#define WB_SIO_WDGPIO56_REG_DATA6	0xe5
+#define WB_SIO_WDGPIO56_REG_INV6	0xe6
+
+/* GPIO1, GPIO2, SUSLED logical device */
+#define WB_SIO_DEV_GPIO12		0x09
+#define WB_SIO_GPIO12_REG_ENABLE	0x30
+#define WB_SIO_GPIO12_ENABLE_1		0
+#define WB_SIO_GPIO12_ENABLE_2		1
+#define WB_SIO_GPIO12_REG_IO1		0xe0
+#define WB_SIO_GPIO12_REG_DATA1	0xe1
+#define WB_SIO_GPIO12_REG_INV1		0xe2
+#define WB_SIO_GPIO12_REG_IO2		0xe4
+#define WB_SIO_GPIO12_REG_DATA2	0xe5
+#define WB_SIO_GPIO12_REG_INV2		0xe6
+
+/* UART D logical device */
+#define WB_SIO_DEV_UARTD		0x0d
+#define WB_SIO_UARTD_REG_ENABLE	0x30
+#define WB_SIO_UARTD_ENABLE_ON		0
+
+/* UART E logical device */
+#define WB_SIO_DEV_UARTE		0x0e
+#define WB_SIO_UARTE_REG_ENABLE	0x30
+#define WB_SIO_UARTE_ENABLE_ON		0
+
+/*
+ * for a description what a particular field of this struct means please see
+ * a description of the relevant module parameter at the bottom of this file
+ */
+struct winbond_gpio_params {
+	unsigned long base;
+	unsigned long gpios;
+	unsigned long ppgpios;
+	unsigned long odgpios;
+	bool pledgpio;
+	bool beepgpio;
+	bool i2cgpio;
+};
+
+static struct winbond_gpio_params params;
+
+static int winbond_sio_enter(unsigned long base)
+{
+	if (!request_muxed_region(base, 2, WB_GPIO_DRIVER_NAME))
+		return -EBUSY;
+
+	/*
+	 * datasheet says two successive writes of the "key" value are needed
+	 * in order for chip to enter the "Extended Function Mode"
+	 */
+	outb(WB_SIO_EXT_ENTER_KEY, base);
+	outb(WB_SIO_EXT_ENTER_KEY, base);
+
+	return 0;
+}
+
+static void winbond_sio_select_logical(unsigned long base, u8 dev)
+{
+	outb(WB_SIO_REG_LOGICAL, base);
+	outb(dev, base + 1);
+}
+
+static void winbond_sio_leave(unsigned long base)
+{
+	outb(WB_SIO_EXT_EXIT_KEY, base);
+
+	release_region(base, 2);
+}
+
+static void winbond_sio_reg_write(unsigned long base, u8 reg, u8 data)
+{
+	outb(reg, base);
+	outb(data, base + 1);
+}
+
+static u8 winbond_sio_reg_read(unsigned long base, u8 reg)
+{
+	outb(reg, base);
+	return inb(base + 1);
+}
+
+static void winbond_sio_reg_bset(unsigned long base, u8 reg, u8 bit)
+{
+	u8 val;
+
+	val = winbond_sio_reg_read(base, reg);
+	val |= BIT(bit);
+	winbond_sio_reg_write(base, reg, val);
+}
+
+static void winbond_sio_reg_bclear(unsigned long base, u8 reg, u8 bit)
+{
+	u8 val;
+
+	val = winbond_sio_reg_read(base, reg);
+	val &= ~BIT(bit);
+	winbond_sio_reg_write(base, reg, val);
+}
+
+static bool winbond_sio_reg_btest(unsigned long base, u8 reg, u8 bit)
+{
+	return winbond_sio_reg_read(base, reg) & BIT(bit);
+}
+
+/**
+ * struct winbond_gpio_port_conflict - possibly conflicting device information
+ * @name:	device name (NULL means no conflicting device defined)
+ * @dev:	Super I/O logical device number where the testreg register
+ *		is located (or WB_SIO_DEV_NONE - don't select any
+ *		logical device)
+ * @testreg:	register number where the testbit bit is located
+ * @testbit:	index of a bit to check whether an actual conflict exists
+ * @warnonly:	if set then a conflict isn't fatal (just warn about it),
+ *		otherwise disable the particular GPIO port if a conflict
+ *		is detected
+ */
+struct winbond_gpio_port_conflict {
+	const char *name;
+	u8 dev;
+	u8 testreg;
+	u8 testbit;
+	bool warnonly;
+};
+
+/**
+ * struct winbond_gpio_info - information about a particular GPIO port (device)
+ * @dev:		Super I/O logical device number of the registers
+ *			specified below
+ * @enablereg:		port enable bit register number
+ * @enablebit:		index of a port enable bit
+ * @outputreg:		output driver mode bit register number
+ * @outputppbit:	index of a push-pull output driver mode bit
+ * @ioreg:		data direction register number
+ * @invreg:		pin data inversion register number
+ * @datareg:		pin data register number
+ * @conflict:		description of a device that possibly conflicts with
+ *			this port
+ */
+struct winbond_gpio_info {
+	u8 dev;
+	u8 enablereg;
+	u8 enablebit;
+	u8 outputreg;
+	u8 outputppbit;
+	u8 ioreg;
+	u8 invreg;
+	u8 datareg;
+	struct winbond_gpio_port_conflict conflict;
+};
+
+static const struct winbond_gpio_info winbond_gpio_infos[6] = {
+	{ /* 0 */
+		.dev = WB_SIO_DEV_GPIO12,
+		.enablereg = WB_SIO_GPIO12_REG_ENABLE,
+		.enablebit = WB_SIO_GPIO12_ENABLE_1,
+		.outputreg = WB_SIO_REG_GPIO1_MF,
+		.outputppbit = WB_SIO_REG_G1MF_G1PP,
+		.ioreg = WB_SIO_GPIO12_REG_IO1,
+		.invreg = WB_SIO_GPIO12_REG_INV1,
+		.datareg = WB_SIO_GPIO12_REG_DATA1,
+		.conflict = {
+			.name = "UARTB",
+			.dev = WB_SIO_DEV_UARTB,
+			.testreg = WB_SIO_UARTB_REG_ENABLE,
+			.testbit = WB_SIO_UARTB_ENABLE_ON,
+			.warnonly = true
+		}
+	},
+	{ /* 1 */
+		.dev = WB_SIO_DEV_GPIO12,
+		.enablereg = WB_SIO_GPIO12_REG_ENABLE,
+		.enablebit = WB_SIO_GPIO12_ENABLE_2,
+		.outputreg = WB_SIO_REG_GPIO1_MF,
+		.outputppbit = WB_SIO_REG_G1MF_G2PP,
+		.ioreg = WB_SIO_GPIO12_REG_IO2,
+		.invreg = WB_SIO_GPIO12_REG_INV2,
+		.datareg = WB_SIO_GPIO12_REG_DATA2
+		/* special conflict handling so doesn't use conflict data */
+	},
+	{ /* 2 */
+		.dev = WB_SIO_DEV_GPIO34,
+		.enablereg = WB_SIO_GPIO34_REG_ENABLE,
+		.enablebit = WB_SIO_GPIO34_ENABLE_3,
+		.outputreg = WB_SIO_REG_OVTGPIO3456,
+		.outputppbit = WB_SIO_REG_OG3456_G3PP,
+		.ioreg = WB_SIO_GPIO34_REG_IO3,
+		.invreg = WB_SIO_GPIO34_REG_INV3,
+		.datareg = WB_SIO_GPIO34_REG_DATA3,
+		.conflict = {
+			.name = "UARTC",
+			.dev = WB_SIO_DEV_UARTC,
+			.testreg = WB_SIO_UARTC_REG_ENABLE,
+			.testbit = WB_SIO_UARTC_ENABLE_ON,
+			.warnonly = true
+		}
+	},
+	{ /* 3 */
+		.dev = WB_SIO_DEV_GPIO34,
+		.enablereg = WB_SIO_GPIO34_REG_ENABLE,
+		.enablebit = WB_SIO_GPIO34_ENABLE_4,
+		.outputreg = WB_SIO_REG_OVTGPIO3456,
+		.outputppbit = WB_SIO_REG_OG3456_G4PP,
+		.ioreg = WB_SIO_GPIO34_REG_IO4,
+		.invreg = WB_SIO_GPIO34_REG_INV4,
+		.datareg = WB_SIO_GPIO34_REG_DATA4,
+		.conflict = {
+			.name = "UARTD",
+			.dev = WB_SIO_DEV_UARTD,
+			.testreg = WB_SIO_UARTD_REG_ENABLE,
+			.testbit = WB_SIO_UARTD_ENABLE_ON,
+			.warnonly = true
+		}
+	},
+	{ /* 4 */
+		.dev = WB_SIO_DEV_WDGPIO56,
+		.enablereg = WB_SIO_WDGPIO56_REG_ENABLE,
+		.enablebit = WB_SIO_WDGPIO56_ENABLE_5,
+		.outputreg = WB_SIO_REG_OVTGPIO3456,
+		.outputppbit = WB_SIO_REG_OG3456_G5PP,
+		.ioreg = WB_SIO_WDGPIO56_REG_IO5,
+		.invreg = WB_SIO_WDGPIO56_REG_INV5,
+		.datareg = WB_SIO_WDGPIO56_REG_DATA5,
+		.conflict = {
+			.name = "UARTE",
+			.dev = WB_SIO_DEV_UARTE,
+			.testreg = WB_SIO_UARTE_REG_ENABLE,
+			.testbit = WB_SIO_UARTE_ENABLE_ON,
+			.warnonly = true
+		}
+	},
+	{ /* 5 */
+		.dev = WB_SIO_DEV_WDGPIO56,
+		.enablereg = WB_SIO_WDGPIO56_REG_ENABLE,
+		.enablebit = WB_SIO_WDGPIO56_ENABLE_6,
+		.outputreg = WB_SIO_REG_OVTGPIO3456,
+		.outputppbit = WB_SIO_REG_OG3456_G6PP,
+		.ioreg = WB_SIO_WDGPIO56_REG_IO6,
+		.invreg = WB_SIO_WDGPIO56_REG_INV6,
+		.datareg = WB_SIO_WDGPIO56_REG_DATA6,
+		.conflict = {
+			.name = "FDC",
+			.dev = WB_SIO_DEV_NONE,
+			.testreg = WB_SIO_REG_GLOBAL_OPT,
+			.testbit = WB_SIO_REG_GO_ENFDC,
+			.warnonly = false
+		}
+	}
+};
+
+/* returns whether changing a pin is allowed */
+static bool winbond_gpio_get_info(unsigned int *gpio_num,
+				  const struct winbond_gpio_info **info)
+{
+	bool allow_changing = true;
+	unsigned long i;
+
+	for_each_set_bit(i, &params.gpios, BITS_PER_LONG) {
+		if (*gpio_num < 8)
+			break;
+
+		*gpio_num -= 8;
+	}
+
+	*info = &winbond_gpio_infos[i];
+
+	/*
+	 * GPIO2 (the second port) shares some pins with a basic PC
+	 * functionality, which is very likely controlled by the firmware.
+	 * Don't allow changing these pins by default.
+	 */
+	if (i == 1) {
+		if (*gpio_num == 0 && !params.pledgpio)
+			allow_changing = false;
+		else if (*gpio_num == 1 && !params.beepgpio)
+			allow_changing = false;
+		else if ((*gpio_num == 5 || *gpio_num == 6) && !params.i2cgpio)
+			allow_changing = false;
+	}
+
+	return allow_changing;
+}
+
+static int winbond_gpio_get(struct gpio_chip *gc, unsigned int offset)
+{
+	unsigned long *base = gpiochip_get_data(gc);
+	const struct winbond_gpio_info *info;
+	bool val;
+	int ret;
+
+	winbond_gpio_get_info(&offset, &info);
+
+	ret = winbond_sio_enter(*base);
+	if (ret)
+		return ret;
+
+	winbond_sio_select_logical(*base, info->dev);
+
+	val = winbond_sio_reg_btest(*base, info->datareg, offset);
+	if (winbond_sio_reg_btest(*base, info->invreg, offset))
+		val = !val;
+
+	winbond_sio_leave(*base);
+
+	return val;
+}
+
+static int winbond_gpio_direction_in(struct gpio_chip *gc, unsigned int offset)
+{
+	unsigned long *base = gpiochip_get_data(gc);
+	const struct winbond_gpio_info *info;
+	int ret;
+
+	if (!winbond_gpio_get_info(&offset, &info))
+		return -EACCES;
+
+	ret = winbond_sio_enter(*base);
+	if (ret)
+		return ret;
+
+	winbond_sio_select_logical(*base, info->dev);
+
+	winbond_sio_reg_bset(*base, info->ioreg, offset);
+
+	winbond_sio_leave(*base);
+
+	return 0;
+}
+
+static int winbond_gpio_direction_out(struct gpio_chip *gc,
+				      unsigned int offset,
+				      int val)
+{
+	unsigned long *base = gpiochip_get_data(gc);
+	const struct winbond_gpio_info *info;
+	int ret;
+
+	if (!winbond_gpio_get_info(&offset, &info))
+		return -EACCES;
+
+	ret = winbond_sio_enter(*base);
+	if (ret)
+		return ret;
+
+	winbond_sio_select_logical(*base, info->dev);
+
+	winbond_sio_reg_bclear(*base, info->ioreg, offset);
+
+	if (winbond_sio_reg_btest(*base, info->invreg, offset))
+		val = !val;
+
+	if (val)
+		winbond_sio_reg_bset(*base, info->datareg, offset);
+	else
+		winbond_sio_reg_bclear(*base, info->datareg, offset);
+
+	winbond_sio_leave(*base);
+
+	return 0;
+}
+
+static void winbond_gpio_set(struct gpio_chip *gc, unsigned int offset,
+			     int val)
+{
+	unsigned long *base = gpiochip_get_data(gc);
+	const struct winbond_gpio_info *info;
+
+	if (!winbond_gpio_get_info(&offset, &info))
+		return;
+
+	if (winbond_sio_enter(*base) != 0)
+		return;
+
+	winbond_sio_select_logical(*base, info->dev);
+
+	if (winbond_sio_reg_btest(*base, info->invreg, offset))
+		val = !val;
+
+	if (val)
+		winbond_sio_reg_bset(*base, info->datareg, offset);
+	else
+		winbond_sio_reg_bclear(*base, info->datareg, offset);
+
+	winbond_sio_leave(*base);
+}
+
+static struct gpio_chip winbond_gpio_chip = {
+	.base			= -1,
+	.label			= WB_GPIO_DRIVER_NAME,
+	.owner			= THIS_MODULE,
+	.can_sleep		= true,
+	.get			= winbond_gpio_get,
+	.direction_input	= winbond_gpio_direction_in,
+	.set			= winbond_gpio_set,
+	.direction_output	= winbond_gpio_direction_out,
+};
+
+static void winbond_gpio_configure_port0_pins(unsigned long base)
+{
+	unsigned int val;
+
+	val = winbond_sio_reg_read(base, WB_SIO_REG_GPIO1_MF);
+	if ((val & WB_SIO_REG_G1MF_FS_MASK) == WB_SIO_REG_G1MF_FS_GPIO1)
+		return;
+
+	pr_warn("GPIO1 pins were connected to something else (%.2x), fixing\n",
+		val);
+
+	val &= ~WB_SIO_REG_G1MF_FS_MASK;
+	val |= WB_SIO_REG_G1MF_FS_GPIO1;
+
+	winbond_sio_reg_write(base, WB_SIO_REG_GPIO1_MF, val);
+}
+
+static void winbond_gpio_configure_port1_check_i2c(unsigned long base)
+{
+	params.i2cgpio = !winbond_sio_reg_btest(base, WB_SIO_REG_I2C_PS,
+						WB_SIO_REG_I2CPS_I2CFS);
+	if (!params.i2cgpio)
+		pr_warn("disabling GPIO2.5 and GPIO2.6 as I2C is enabled\n");
+}
+
+static bool winbond_gpio_configure_port(unsigned long base, unsigned int idx)
+{
+	const struct winbond_gpio_info *info = &winbond_gpio_infos[idx];
+	const struct winbond_gpio_port_conflict *conflict = &info->conflict;
+
+	/* is there a possible conflicting device defined? */
+	if (conflict->name != NULL) {
+		if (conflict->dev != WB_SIO_DEV_NONE)
+			winbond_sio_select_logical(base, conflict->dev);
+
+		if (winbond_sio_reg_btest(base, conflict->testreg,
+					  conflict->testbit)) {
+			if (conflict->warnonly)
+				pr_warn("enabled GPIO%u share pins with active %s\n",
+					idx + 1, conflict->name);
+			else {
+				pr_warn("disabling GPIO%u as %s is enabled\n",
+					idx + 1, conflict->name);
+				return false;
+			}
+		}
+	}
+
+	/* GPIO1 and GPIO2 need some (additional) special handling */
+	if (idx == 0)
+		winbond_gpio_configure_port0_pins(base);
+	else if (idx == 1)
+		winbond_gpio_configure_port1_check_i2c(base);
+
+	winbond_sio_select_logical(base, info->dev);
+
+	winbond_sio_reg_bset(base, info->enablereg, info->enablebit);
+
+	if (params.ppgpios & BIT(idx))
+		winbond_sio_reg_bset(base, info->outputreg,
+				     info->outputppbit);
+	else if (params.odgpios & BIT(idx))
+		winbond_sio_reg_bclear(base, info->outputreg,
+				       info->outputppbit);
+	else
+		pr_notice("GPIO%u pins are %s\n", idx + 1,
+			  winbond_sio_reg_btest(base, info->outputreg,
+						info->outputppbit) ?
+			  "push-pull" :
+			  "open drain");
+
+	return true;
+}
+
+static int winbond_gpio_configure(unsigned long base)
+{
+	unsigned long i;
+
+	for_each_set_bit(i, &params.gpios, BITS_PER_LONG)
+		if (!winbond_gpio_configure_port(base, i))
+			__clear_bit(i, &params.gpios);
+
+	if (!params.gpios) {
+		pr_err("please use 'gpios' module parameter to select some active GPIO ports to enable\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int winbond_gpio_check_chip(unsigned long base)
+{
+	int ret;
+	unsigned int chip;
+
+	ret = winbond_sio_enter(base);
+	if (ret)
+		return ret;
+
+	chip = winbond_sio_reg_read(base, WB_SIO_REG_CHIP_MSB) << 8;
+	chip |= winbond_sio_reg_read(base, WB_SIO_REG_CHIP_LSB);
+
+	pr_notice("chip ID at %lx is %.4x\n", base, chip);
+
+	if ((chip & WB_SIO_CHIP_ID_W83627UHG_MASK) !=
+	    WB_SIO_CHIP_ID_W83627UHG) {
+		pr_err("not an our chip\n");
+		ret = -ENODEV;
+	}
+
+	winbond_sio_leave(base);
+
+	return ret;
+}
+
+static int winbond_gpio_imatch(struct device *dev, unsigned int id)
+{
+	unsigned long gpios_rem;
+	int ret;
+
+	gpios_rem = params.gpios & ~GENMASK(ARRAY_SIZE(winbond_gpio_infos) - 1,
+					    0);
+	if (gpios_rem) {
+		pr_warn("unknown ports (%lx) enabled in GPIO ports bitmask\n",
+			gpios_rem);
+		params.gpios &= ~gpios_rem;
+	}
+
+	if (params.ppgpios & params.odgpios) {
+		pr_err("some GPIO ports are set both to push-pull and open drain mode at the same time\n");
+		return 0;
+	}
+
+	if (params.base != 0)
+		return winbond_gpio_check_chip(params.base) == 0;
+
+	/*
+	 * if the 'base' module parameter is unset probe two chip default
+	 * I/O port bases
+	 */
+	params.base = WB_SIO_BASE;
+	ret = winbond_gpio_check_chip(params.base);
+	if (ret == 0)
+		return 1;
+	if (ret != -ENODEV && ret != -EBUSY)
+		return 0;
+
+	params.base = WB_SIO_BASE_HIGH;
+	return winbond_gpio_check_chip(params.base) == 0;
+}
+
+static int winbond_gpio_iprobe(struct device *dev, unsigned int id)
+{
+	int ret;
+
+	if (params.base == 0)
+		return -EINVAL;
+
+	ret = winbond_sio_enter(params.base);
+	if (ret)
+		return ret;
+
+	ret = winbond_gpio_configure(params.base);
+
+	winbond_sio_leave(params.base);
+
+	if (ret)
+		return ret;
+
+	/*
+	 * Add 8 gpios for every GPIO port that was enabled in gpios
+	 * module parameter (that wasn't disabled earlier in
+	 * winbond_gpio_configure() & co. due to, for example, a pin conflict).
+	 */
+	winbond_gpio_chip.ngpio = hweight_long(params.gpios) * 8;
+
+	/*
+	 * GPIO6 port has only 5 pins, so if it is enabled we have to adjust
+	 * the total count appropriately
+	 */
+	if (params.gpios & BIT(5))
+		winbond_gpio_chip.ngpio -= (8 - 5);
+
+	winbond_gpio_chip.parent = dev;
+
+	return devm_gpiochip_add_data(dev, &winbond_gpio_chip, &params.base);
+}
+
+static struct isa_driver winbond_gpio_idriver = {
+	.driver = {
+		.name	= WB_GPIO_DRIVER_NAME,
+	},
+	.match	= winbond_gpio_imatch,
+	.probe	= winbond_gpio_iprobe,
+};
+
+module_isa_driver(winbond_gpio_idriver, 1);
+
+module_param_named(base, params.base, ulong, 0444);
+MODULE_PARM_DESC(base,
+		 "I/O port base (when unset - probe chip default ones)");
+
+/* This parameter sets which GPIO devices (ports) we enable */
+module_param_named(gpios, params.gpios, ulong, 0444);
+MODULE_PARM_DESC(gpios,
+		 "bitmask of GPIO ports to enable (bit 0 - GPIO1, bit 1 - GPIO2, etc.");
+
+/*
+ * These two parameters below set how we configure GPIO ports output drivers.
+ * It can't be a one bitmask since we need three values per port: push-pull,
+ * open-drain and keep as-is (this is the default).
+ */
+module_param_named(ppgpios, params.ppgpios, ulong, 0444);
+MODULE_PARM_DESC(ppgpios,
+		 "bitmask of GPIO ports to set to push-pull mode (bit 0 - GPIO1, bit 1 - GPIO2, etc.");
+
+module_param_named(odgpios, params.odgpios, ulong, 0444);
+MODULE_PARM_DESC(odgpios,
+		 "bitmask of GPIO ports to set to open drain mode (bit 0 - GPIO1, bit 1 - GPIO2, etc.");
+
+/*
+ * GPIO2.0 and GPIO2.1 control a basic PC functionality that we
+ * don't allow tinkering with by default (it is very likely that the
+ * firmware owns these pins).
+ * These two parameters below allow overriding these prohibitions.
+ */
+module_param_named(pledgpio, params.pledgpio, bool, 0644);
+MODULE_PARM_DESC(pledgpio,
+		 "enable changing value of GPIO2.0 bit (Power LED), default no.");
+
+module_param_named(beepgpio, params.beepgpio, bool, 0644);
+MODULE_PARM_DESC(beepgpio,
+		 "enable changing value of GPIO2.1 bit (BEEP), default no.");
+
+MODULE_AUTHOR("Maciej S. Szmigiero <mail@maciej.szmigiero.name>");
+MODULE_DESCRIPTION("GPIO interface for Winbond Super I/O chips");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/gpio-wm831x.c b/drivers/gpio/gpio-wm831x.c
new file mode 100644
index 000000000..a3a32a770
--- /dev/null
+++ b/drivers/gpio/gpio-wm831x.c
@@ -0,0 +1,315 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * gpiolib support for Wolfson WM831x PMICs
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/gpio/driver.h>
+#include <linux/mfd/core.h>
+#include <linux/platform_device.h>
+#include <linux/seq_file.h>
+
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/pdata.h>
+#include <linux/mfd/wm831x/gpio.h>
+#include <linux/mfd/wm831x/irq.h>
+
+struct wm831x_gpio {
+	struct wm831x *wm831x;
+	struct gpio_chip gpio_chip;
+};
+
+static int wm831x_gpio_direction_in(struct gpio_chip *chip, unsigned offset)
+{
+	struct wm831x_gpio *wm831x_gpio = gpiochip_get_data(chip);
+	struct wm831x *wm831x = wm831x_gpio->wm831x;
+	int val = WM831X_GPN_DIR;
+
+	if (wm831x->has_gpio_ena)
+		val |= WM831X_GPN_TRI;
+
+	return wm831x_set_bits(wm831x, WM831X_GPIO1_CONTROL + offset,
+			       WM831X_GPN_DIR | WM831X_GPN_TRI |
+			       WM831X_GPN_FN_MASK, val);
+}
+
+static int wm831x_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct wm831x_gpio *wm831x_gpio = gpiochip_get_data(chip);
+	struct wm831x *wm831x = wm831x_gpio->wm831x;
+	int ret;
+
+	ret = wm831x_reg_read(wm831x, WM831X_GPIO_LEVEL);
+	if (ret < 0)
+		return ret;
+
+	if (ret & 1 << offset)
+		return 1;
+	else
+		return 0;
+}
+
+static void wm831x_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct wm831x_gpio *wm831x_gpio = gpiochip_get_data(chip);
+	struct wm831x *wm831x = wm831x_gpio->wm831x;
+
+	wm831x_set_bits(wm831x, WM831X_GPIO_LEVEL, 1 << offset,
+			value << offset);
+}
+
+static int wm831x_gpio_direction_out(struct gpio_chip *chip,
+				     unsigned offset, int value)
+{
+	struct wm831x_gpio *wm831x_gpio = gpiochip_get_data(chip);
+	struct wm831x *wm831x = wm831x_gpio->wm831x;
+	int val = 0;
+	int ret;
+
+	if (wm831x->has_gpio_ena)
+		val |= WM831X_GPN_TRI;
+
+	ret = wm831x_set_bits(wm831x, WM831X_GPIO1_CONTROL + offset,
+			      WM831X_GPN_DIR | WM831X_GPN_TRI |
+			      WM831X_GPN_FN_MASK, val);
+	if (ret < 0)
+		return ret;
+
+	/* Can only set GPIO state once it's in output mode */
+	wm831x_gpio_set(chip, offset, value);
+
+	return 0;
+}
+
+static int wm831x_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	struct wm831x_gpio *wm831x_gpio = gpiochip_get_data(chip);
+	struct wm831x *wm831x = wm831x_gpio->wm831x;
+
+	return irq_create_mapping(wm831x->irq_domain,
+				  WM831X_IRQ_GPIO_1 + offset);
+}
+
+static int wm831x_gpio_set_debounce(struct wm831x *wm831x, unsigned offset,
+				    unsigned debounce)
+{
+	int reg = WM831X_GPIO1_CONTROL + offset;
+	int ret, fn;
+
+	ret = wm831x_reg_read(wm831x, reg);
+	if (ret < 0)
+		return ret;
+
+	switch (ret & WM831X_GPN_FN_MASK) {
+	case 0:
+	case 1:
+		break;
+	default:
+		/* Not in GPIO mode */
+		return -EBUSY;
+	}
+
+	if (debounce >= 32 && debounce <= 64)
+		fn = 0;
+	else if (debounce >= 4000 && debounce <= 8000)
+		fn = 1;
+	else
+		return -EINVAL;
+
+	return wm831x_set_bits(wm831x, reg, WM831X_GPN_FN_MASK, fn);
+}
+
+static int wm831x_set_config(struct gpio_chip *chip, unsigned int offset,
+			     unsigned long config)
+{
+	struct wm831x_gpio *wm831x_gpio = gpiochip_get_data(chip);
+	struct wm831x *wm831x = wm831x_gpio->wm831x;
+	int reg = WM831X_GPIO1_CONTROL + offset;
+
+	switch (pinconf_to_config_param(config)) {
+	case PIN_CONFIG_DRIVE_OPEN_DRAIN:
+		return wm831x_set_bits(wm831x, reg,
+				       WM831X_GPN_OD_MASK, WM831X_GPN_OD);
+	case PIN_CONFIG_DRIVE_PUSH_PULL:
+		return wm831x_set_bits(wm831x, reg,
+				       WM831X_GPN_OD_MASK, 0);
+	case PIN_CONFIG_INPUT_DEBOUNCE:
+		return wm831x_gpio_set_debounce(wm831x, offset,
+			pinconf_to_config_argument(config));
+	default:
+		break;
+	}
+
+	return -ENOTSUPP;
+}
+
+#ifdef CONFIG_DEBUG_FS
+static void wm831x_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
+{
+	struct wm831x_gpio *wm831x_gpio = gpiochip_get_data(chip);
+	struct wm831x *wm831x = wm831x_gpio->wm831x;
+	int i, tristated;
+
+	for (i = 0; i < chip->ngpio; i++) {
+		int gpio = i + chip->base;
+		int reg;
+		const char *label, *pull, *powerdomain;
+
+		/* We report the GPIO even if it's not requested since
+		 * we're also reporting things like alternate
+		 * functions which apply even when the GPIO is not in
+		 * use as a GPIO.
+		 */
+		label = gpiochip_is_requested(chip, i);
+		if (!label)
+			label = "Unrequested";
+
+		seq_printf(s, " gpio-%-3d (%-20.20s) ", gpio, label);
+
+		reg = wm831x_reg_read(wm831x, WM831X_GPIO1_CONTROL + i);
+		if (reg < 0) {
+			dev_err(wm831x->dev,
+				"GPIO control %d read failed: %d\n",
+				gpio, reg);
+			seq_putc(s, '\n');
+			continue;
+		}
+
+		switch (reg & WM831X_GPN_PULL_MASK) {
+		case WM831X_GPIO_PULL_NONE:
+			pull = "nopull";
+			break;
+		case WM831X_GPIO_PULL_DOWN:
+			pull = "pulldown";
+			break;
+		case WM831X_GPIO_PULL_UP:
+			pull = "pullup";
+			break;
+		default:
+			pull = "INVALID PULL";
+			break;
+		}
+
+		switch (i + 1) {
+		case 1 ... 3:
+		case 7 ... 9:
+			if (reg & WM831X_GPN_PWR_DOM)
+				powerdomain = "VPMIC";
+			else
+				powerdomain = "DBVDD";
+			break;
+
+		case 4 ... 6:
+		case 10 ... 12:
+			if (reg & WM831X_GPN_PWR_DOM)
+				powerdomain = "SYSVDD";
+			else
+				powerdomain = "DBVDD";
+			break;
+
+		case 13 ... 16:
+			powerdomain = "TPVDD";
+			break;
+
+		default:
+			BUG();
+			break;
+		}
+
+		tristated = reg & WM831X_GPN_TRI;
+		if (wm831x->has_gpio_ena)
+			tristated = !tristated;
+
+		seq_printf(s, " %s %s %s %s%s\n"
+			   "                                  %s%s (0x%4x)\n",
+			   reg & WM831X_GPN_DIR ? "in" : "out",
+			   wm831x_gpio_get(chip, i) ? "high" : "low",
+			   pull,
+			   powerdomain,
+			   reg & WM831X_GPN_POL ? "" : " inverted",
+			   reg & WM831X_GPN_OD ? "open-drain" : "push-pull",
+			   tristated ? " tristated" : "",
+			   reg);
+	}
+}
+#else
+#define wm831x_gpio_dbg_show NULL
+#endif
+
+static const struct gpio_chip template_chip = {
+	.label			= "wm831x",
+	.owner			= THIS_MODULE,
+	.direction_input	= wm831x_gpio_direction_in,
+	.get			= wm831x_gpio_get,
+	.direction_output	= wm831x_gpio_direction_out,
+	.set			= wm831x_gpio_set,
+	.to_irq			= wm831x_gpio_to_irq,
+	.set_config		= wm831x_set_config,
+	.dbg_show		= wm831x_gpio_dbg_show,
+	.can_sleep		= true,
+};
+
+static int wm831x_gpio_probe(struct platform_device *pdev)
+{
+	struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+	struct wm831x_pdata *pdata = &wm831x->pdata;
+	struct wm831x_gpio *wm831x_gpio;
+	int ret;
+
+	wm831x_gpio = devm_kzalloc(&pdev->dev, sizeof(*wm831x_gpio),
+				   GFP_KERNEL);
+	if (wm831x_gpio == NULL)
+		return -ENOMEM;
+
+	wm831x_gpio->wm831x = wm831x;
+	wm831x_gpio->gpio_chip = template_chip;
+	wm831x_gpio->gpio_chip.ngpio = wm831x->num_gpio;
+	wm831x_gpio->gpio_chip.parent = &pdev->dev;
+	if (pdata && pdata->gpio_base)
+		wm831x_gpio->gpio_chip.base = pdata->gpio_base;
+	else
+		wm831x_gpio->gpio_chip.base = -1;
+#ifdef CONFIG_OF_GPIO
+	wm831x_gpio->gpio_chip.of_node = wm831x->dev->of_node;
+#endif
+
+	ret = devm_gpiochip_add_data(&pdev->dev, &wm831x_gpio->gpio_chip,
+				     wm831x_gpio);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, wm831x_gpio);
+
+	return ret;
+}
+
+static struct platform_driver wm831x_gpio_driver = {
+	.driver.name	= "wm831x-gpio",
+	.probe		= wm831x_gpio_probe,
+};
+
+static int __init wm831x_gpio_init(void)
+{
+	return platform_driver_register(&wm831x_gpio_driver);
+}
+subsys_initcall(wm831x_gpio_init);
+
+static void __exit wm831x_gpio_exit(void)
+{
+	platform_driver_unregister(&wm831x_gpio_driver);
+}
+module_exit(wm831x_gpio_exit);
+
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("GPIO interface for WM831x PMICs");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm831x-gpio");
diff --git a/drivers/gpio/gpio-wm8350.c b/drivers/gpio/gpio-wm8350.c
new file mode 100644
index 000000000..460f0a4b0
--- /dev/null
+++ b/drivers/gpio/gpio-wm8350.c
@@ -0,0 +1,156 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * gpiolib support for Wolfson WM835x PMICs
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/gpio/driver.h>
+#include <linux/mfd/core.h>
+#include <linux/platform_device.h>
+#include <linux/seq_file.h>
+
+#include <linux/mfd/wm8350/core.h>
+#include <linux/mfd/wm8350/gpio.h>
+
+struct wm8350_gpio_data {
+	struct wm8350 *wm8350;
+	struct gpio_chip gpio_chip;
+};
+
+static int wm8350_gpio_direction_in(struct gpio_chip *chip, unsigned offset)
+{
+	struct wm8350_gpio_data *wm8350_gpio = gpiochip_get_data(chip);
+	struct wm8350 *wm8350 = wm8350_gpio->wm8350;
+
+	return wm8350_set_bits(wm8350, WM8350_GPIO_CONFIGURATION_I_O,
+			       1 << offset);
+}
+
+static int wm8350_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct wm8350_gpio_data *wm8350_gpio = gpiochip_get_data(chip);
+	struct wm8350 *wm8350 = wm8350_gpio->wm8350;
+	int ret;
+
+	ret = wm8350_reg_read(wm8350, WM8350_GPIO_LEVEL);
+	if (ret < 0)
+		return ret;
+
+	if (ret & (1 << offset))
+		return 1;
+	else
+		return 0;
+}
+
+static void wm8350_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct wm8350_gpio_data *wm8350_gpio = gpiochip_get_data(chip);
+	struct wm8350 *wm8350 = wm8350_gpio->wm8350;
+
+	if (value)
+		wm8350_set_bits(wm8350, WM8350_GPIO_LEVEL, 1 << offset);
+	else
+		wm8350_clear_bits(wm8350, WM8350_GPIO_LEVEL, 1 << offset);
+}
+
+static int wm8350_gpio_direction_out(struct gpio_chip *chip,
+				     unsigned offset, int value)
+{
+	struct wm8350_gpio_data *wm8350_gpio = gpiochip_get_data(chip);
+	struct wm8350 *wm8350 = wm8350_gpio->wm8350;
+	int ret;
+
+	ret = wm8350_clear_bits(wm8350, WM8350_GPIO_CONFIGURATION_I_O,
+				1 << offset);
+	if (ret < 0)
+		return ret;
+
+	/* Don't have an atomic direction/value setup */
+	wm8350_gpio_set(chip, offset, value);
+
+	return 0;
+}
+
+static int wm8350_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	struct wm8350_gpio_data *wm8350_gpio = gpiochip_get_data(chip);
+	struct wm8350 *wm8350 = wm8350_gpio->wm8350;
+
+	if (!wm8350->irq_base)
+		return -EINVAL;
+
+	return wm8350->irq_base + WM8350_IRQ_GPIO(offset);
+}
+
+static const struct gpio_chip template_chip = {
+	.label			= "wm8350",
+	.owner			= THIS_MODULE,
+	.direction_input	= wm8350_gpio_direction_in,
+	.get			= wm8350_gpio_get,
+	.direction_output	= wm8350_gpio_direction_out,
+	.set			= wm8350_gpio_set,
+	.to_irq			= wm8350_gpio_to_irq,
+	.can_sleep		= true,
+};
+
+static int wm8350_gpio_probe(struct platform_device *pdev)
+{
+	struct wm8350 *wm8350 = dev_get_drvdata(pdev->dev.parent);
+	struct wm8350_platform_data *pdata = dev_get_platdata(wm8350->dev);
+	struct wm8350_gpio_data *wm8350_gpio;
+	int ret;
+
+	wm8350_gpio = devm_kzalloc(&pdev->dev, sizeof(*wm8350_gpio),
+				   GFP_KERNEL);
+	if (wm8350_gpio == NULL)
+		return -ENOMEM;
+
+	wm8350_gpio->wm8350 = wm8350;
+	wm8350_gpio->gpio_chip = template_chip;
+	wm8350_gpio->gpio_chip.ngpio = 13;
+	wm8350_gpio->gpio_chip.parent = &pdev->dev;
+	if (pdata && pdata->gpio_base)
+		wm8350_gpio->gpio_chip.base = pdata->gpio_base;
+	else
+		wm8350_gpio->gpio_chip.base = -1;
+
+	ret = devm_gpiochip_add_data(&pdev->dev, &wm8350_gpio->gpio_chip,
+				     wm8350_gpio);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, wm8350_gpio);
+
+	return ret;
+}
+
+static struct platform_driver wm8350_gpio_driver = {
+	.driver.name	= "wm8350-gpio",
+	.probe		= wm8350_gpio_probe,
+};
+
+static int __init wm8350_gpio_init(void)
+{
+	return platform_driver_register(&wm8350_gpio_driver);
+}
+subsys_initcall(wm8350_gpio_init);
+
+static void __exit wm8350_gpio_exit(void)
+{
+	platform_driver_unregister(&wm8350_gpio_driver);
+}
+module_exit(wm8350_gpio_exit);
+
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("GPIO interface for WM8350 PMICs");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm8350-gpio");
diff --git a/drivers/gpio/gpio-wm8994.c b/drivers/gpio/gpio-wm8994.c
new file mode 100644
index 000000000..9af89cf7f
--- /dev/null
+++ b/drivers/gpio/gpio-wm8994.c
@@ -0,0 +1,315 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * gpiolib support for Wolfson WM8994
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/gpio/driver.h>
+#include <linux/mfd/core.h>
+#include <linux/platform_device.h>
+#include <linux/seq_file.h>
+#include <linux/regmap.h>
+
+#include <linux/mfd/wm8994/core.h>
+#include <linux/mfd/wm8994/pdata.h>
+#include <linux/mfd/wm8994/gpio.h>
+#include <linux/mfd/wm8994/registers.h>
+
+struct wm8994_gpio {
+	struct wm8994 *wm8994;
+	struct gpio_chip gpio_chip;
+};
+
+static int wm8994_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+	struct wm8994_gpio *wm8994_gpio = gpiochip_get_data(chip);
+	struct wm8994 *wm8994 = wm8994_gpio->wm8994;
+
+	switch (wm8994->type) {
+	case WM8958:
+		switch (offset) {
+		case 1:
+		case 2:
+		case 3:
+		case 4:
+		case 6:
+			return -EINVAL;
+		}
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static int wm8994_gpio_direction_in(struct gpio_chip *chip, unsigned offset)
+{
+	struct wm8994_gpio *wm8994_gpio = gpiochip_get_data(chip);
+	struct wm8994 *wm8994 = wm8994_gpio->wm8994;
+
+	return wm8994_set_bits(wm8994, WM8994_GPIO_1 + offset,
+			       WM8994_GPN_DIR, WM8994_GPN_DIR);
+}
+
+static int wm8994_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct wm8994_gpio *wm8994_gpio = gpiochip_get_data(chip);
+	struct wm8994 *wm8994 = wm8994_gpio->wm8994;
+	int ret;
+
+	ret = wm8994_reg_read(wm8994, WM8994_GPIO_1 + offset);
+	if (ret < 0)
+		return ret;
+
+	if (ret & WM8994_GPN_LVL)
+		return 1;
+	else
+		return 0;
+}
+
+static int wm8994_gpio_direction_out(struct gpio_chip *chip,
+				     unsigned offset, int value)
+{
+	struct wm8994_gpio *wm8994_gpio = gpiochip_get_data(chip);
+	struct wm8994 *wm8994 = wm8994_gpio->wm8994;
+
+	if (value)
+		value = WM8994_GPN_LVL;
+
+	return wm8994_set_bits(wm8994, WM8994_GPIO_1 + offset,
+			       WM8994_GPN_DIR | WM8994_GPN_LVL, value);
+}
+
+static void wm8994_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct wm8994_gpio *wm8994_gpio = gpiochip_get_data(chip);
+	struct wm8994 *wm8994 = wm8994_gpio->wm8994;
+
+	if (value)
+		value = WM8994_GPN_LVL;
+
+	wm8994_set_bits(wm8994, WM8994_GPIO_1 + offset, WM8994_GPN_LVL, value);
+}
+
+static int wm8994_gpio_set_config(struct gpio_chip *chip, unsigned int offset,
+				  unsigned long config)
+{
+	struct wm8994_gpio *wm8994_gpio = gpiochip_get_data(chip);
+	struct wm8994 *wm8994 = wm8994_gpio->wm8994;
+
+	switch (pinconf_to_config_param(config)) {
+	case PIN_CONFIG_DRIVE_OPEN_DRAIN:
+		return wm8994_set_bits(wm8994, WM8994_GPIO_1 + offset,
+				       WM8994_GPN_OP_CFG_MASK,
+				       WM8994_GPN_OP_CFG);
+	case PIN_CONFIG_DRIVE_PUSH_PULL:
+		return wm8994_set_bits(wm8994, WM8994_GPIO_1 + offset,
+				       WM8994_GPN_OP_CFG_MASK, 0);
+	default:
+		break;
+	}
+
+	return -ENOTSUPP;
+}
+
+static int wm8994_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	struct wm8994_gpio *wm8994_gpio = gpiochip_get_data(chip);
+	struct wm8994 *wm8994 = wm8994_gpio->wm8994;
+
+	return regmap_irq_get_virq(wm8994->irq_data, offset);
+}
+
+
+#ifdef CONFIG_DEBUG_FS
+static const char *wm8994_gpio_fn(u16 fn)
+{
+	switch (fn) {
+	case WM8994_GP_FN_PIN_SPECIFIC:
+		return "pin-specific";
+	case WM8994_GP_FN_GPIO:
+		return "GPIO";
+	case WM8994_GP_FN_SDOUT:
+		return "SDOUT";
+	case WM8994_GP_FN_IRQ:
+		return "IRQ";
+	case WM8994_GP_FN_TEMPERATURE:
+		return "Temperature";
+	case WM8994_GP_FN_MICBIAS1_DET:
+		return "MICBIAS1 detect";
+	case WM8994_GP_FN_MICBIAS1_SHORT:
+		return "MICBIAS1 short";
+	case WM8994_GP_FN_MICBIAS2_DET:
+		return "MICBIAS2 detect";
+	case WM8994_GP_FN_MICBIAS2_SHORT:
+		return "MICBIAS2 short";
+	case WM8994_GP_FN_FLL1_LOCK:
+		return "FLL1 lock";
+	case WM8994_GP_FN_FLL2_LOCK:
+		return "FLL2 lock";
+	case WM8994_GP_FN_SRC1_LOCK:
+		return "SRC1 lock";
+	case WM8994_GP_FN_SRC2_LOCK:
+		return "SRC2 lock";
+	case WM8994_GP_FN_DRC1_ACT:
+		return "DRC1 activity";
+	case WM8994_GP_FN_DRC2_ACT:
+		return "DRC2 activity";
+	case WM8994_GP_FN_DRC3_ACT:
+		return "DRC3 activity";
+	case WM8994_GP_FN_WSEQ_STATUS:
+		return "Write sequencer";
+	case WM8994_GP_FN_FIFO_ERROR:
+		return "FIFO error";
+	case WM8994_GP_FN_OPCLK:
+		return "OPCLK";
+	case WM8994_GP_FN_THW:
+		return "Thermal warning";
+	case WM8994_GP_FN_DCS_DONE:
+		return "DC servo";
+	case WM8994_GP_FN_FLL1_OUT:
+		return "FLL1 output";
+	case WM8994_GP_FN_FLL2_OUT:
+		return "FLL1 output";
+	default:
+		return "Unknown";
+	}
+}
+
+static void wm8994_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
+{
+	struct wm8994_gpio *wm8994_gpio = gpiochip_get_data(chip);
+	struct wm8994 *wm8994 = wm8994_gpio->wm8994;
+	int i;
+
+	for (i = 0; i < chip->ngpio; i++) {
+		int gpio = i + chip->base;
+		int reg;
+		const char *label;
+
+		/* We report the GPIO even if it's not requested since
+		 * we're also reporting things like alternate
+		 * functions which apply even when the GPIO is not in
+		 * use as a GPIO.
+		 */
+		label = gpiochip_is_requested(chip, i);
+		if (!label)
+			label = "Unrequested";
+
+		seq_printf(s, " gpio-%-3d (%-20.20s) ", gpio, label);
+
+		reg = wm8994_reg_read(wm8994, WM8994_GPIO_1 + i);
+		if (reg < 0) {
+			dev_err(wm8994->dev,
+				"GPIO control %d read failed: %d\n",
+				gpio, reg);
+			seq_printf(s, "\n");
+			continue;
+		}
+
+		if (reg & WM8994_GPN_DIR)
+			seq_printf(s, "in ");
+		else
+			seq_printf(s, "out ");
+
+		if (reg & WM8994_GPN_PU)
+			seq_printf(s, "pull up ");
+
+		if (reg & WM8994_GPN_PD)
+			seq_printf(s, "pull down ");
+
+		if (reg & WM8994_GPN_POL)
+			seq_printf(s, "inverted ");
+		else
+			seq_printf(s, "noninverted ");
+
+		if (reg & WM8994_GPN_OP_CFG)
+			seq_printf(s, "open drain ");
+		else
+			seq_printf(s, "push-pull ");
+
+		seq_printf(s, "%s (%x)\n",
+			   wm8994_gpio_fn(reg & WM8994_GPN_FN_MASK), reg);
+	}
+}
+#else
+#define wm8994_gpio_dbg_show NULL
+#endif
+
+static const struct gpio_chip template_chip = {
+	.label			= "wm8994",
+	.owner			= THIS_MODULE,
+	.request		= wm8994_gpio_request,
+	.direction_input	= wm8994_gpio_direction_in,
+	.get			= wm8994_gpio_get,
+	.direction_output	= wm8994_gpio_direction_out,
+	.set			= wm8994_gpio_set,
+	.set_config		= wm8994_gpio_set_config,
+	.to_irq			= wm8994_gpio_to_irq,
+	.dbg_show		= wm8994_gpio_dbg_show,
+	.can_sleep		= true,
+};
+
+static int wm8994_gpio_probe(struct platform_device *pdev)
+{
+	struct wm8994 *wm8994 = dev_get_drvdata(pdev->dev.parent);
+	struct wm8994_pdata *pdata = dev_get_platdata(wm8994->dev);
+	struct wm8994_gpio *wm8994_gpio;
+	int ret;
+
+	wm8994_gpio = devm_kzalloc(&pdev->dev, sizeof(*wm8994_gpio),
+				   GFP_KERNEL);
+	if (wm8994_gpio == NULL)
+		return -ENOMEM;
+
+	wm8994_gpio->wm8994 = wm8994;
+	wm8994_gpio->gpio_chip = template_chip;
+	wm8994_gpio->gpio_chip.ngpio = WM8994_GPIO_MAX;
+	wm8994_gpio->gpio_chip.parent = &pdev->dev;
+	if (pdata && pdata->gpio_base)
+		wm8994_gpio->gpio_chip.base = pdata->gpio_base;
+	else
+		wm8994_gpio->gpio_chip.base = -1;
+
+	ret = devm_gpiochip_add_data(&pdev->dev, &wm8994_gpio->gpio_chip,
+				     wm8994_gpio);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Could not register gpiochip, %d\n",
+			ret);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, wm8994_gpio);
+
+	return ret;
+}
+
+static struct platform_driver wm8994_gpio_driver = {
+	.driver.name	= "wm8994-gpio",
+	.probe		= wm8994_gpio_probe,
+};
+
+static int __init wm8994_gpio_init(void)
+{
+	return platform_driver_register(&wm8994_gpio_driver);
+}
+subsys_initcall(wm8994_gpio_init);
+
+static void __exit wm8994_gpio_exit(void)
+{
+	platform_driver_unregister(&wm8994_gpio_driver);
+}
+module_exit(wm8994_gpio_exit);
+
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("GPIO interface for WM8994");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm8994-gpio");
diff --git a/drivers/gpio/gpio-ws16c48.c b/drivers/gpio/gpio-ws16c48.c
new file mode 100644
index 000000000..2d89d0529
--- /dev/null
+++ b/drivers/gpio/gpio-ws16c48.c
@@ -0,0 +1,453 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * GPIO driver for the WinSystems WS16C48
+ * Copyright (C) 2016 William Breathitt Gray
+ */
+#include <linux/bitmap.h>
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/gpio/driver.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/irqdesc.h>
+#include <linux/isa.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/spinlock.h>
+
+#define WS16C48_EXTENT 16
+#define MAX_NUM_WS16C48 max_num_isa_dev(WS16C48_EXTENT)
+
+static unsigned int base[MAX_NUM_WS16C48];
+static unsigned int num_ws16c48;
+module_param_hw_array(base, uint, ioport, &num_ws16c48, 0);
+MODULE_PARM_DESC(base, "WinSystems WS16C48 base addresses");
+
+static unsigned int irq[MAX_NUM_WS16C48];
+module_param_hw_array(irq, uint, irq, NULL, 0);
+MODULE_PARM_DESC(irq, "WinSystems WS16C48 interrupt line numbers");
+
+/**
+ * struct ws16c48_gpio - GPIO device private data structure
+ * @chip:	instance of the gpio_chip
+ * @io_state:	bit I/O state (whether bit is set to input or output)
+ * @out_state:	output bits state
+ * @lock:	synchronization lock to prevent I/O race conditions
+ * @irq_mask:	I/O bits affected by interrupts
+ * @flow_mask:	IRQ flow type mask for the respective I/O bits
+ * @base:	base port address of the GPIO device
+ */
+struct ws16c48_gpio {
+	struct gpio_chip chip;
+	unsigned char io_state[6];
+	unsigned char out_state[6];
+	raw_spinlock_t lock;
+	unsigned long irq_mask;
+	unsigned long flow_mask;
+	unsigned base;
+};
+
+static int ws16c48_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
+{
+	struct ws16c48_gpio *const ws16c48gpio = gpiochip_get_data(chip);
+	const unsigned port = offset / 8;
+	const unsigned mask = BIT(offset % 8);
+
+	if (ws16c48gpio->io_state[port] & mask)
+		return GPIO_LINE_DIRECTION_IN;
+
+	return GPIO_LINE_DIRECTION_OUT;
+}
+
+static int ws16c48_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct ws16c48_gpio *const ws16c48gpio = gpiochip_get_data(chip);
+	const unsigned port = offset / 8;
+	const unsigned mask = BIT(offset % 8);
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&ws16c48gpio->lock, flags);
+
+	ws16c48gpio->io_state[port] |= mask;
+	ws16c48gpio->out_state[port] &= ~mask;
+	outb(ws16c48gpio->out_state[port], ws16c48gpio->base + port);
+
+	raw_spin_unlock_irqrestore(&ws16c48gpio->lock, flags);
+
+	return 0;
+}
+
+static int ws16c48_gpio_direction_output(struct gpio_chip *chip,
+	unsigned offset, int value)
+{
+	struct ws16c48_gpio *const ws16c48gpio = gpiochip_get_data(chip);
+	const unsigned port = offset / 8;
+	const unsigned mask = BIT(offset % 8);
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&ws16c48gpio->lock, flags);
+
+	ws16c48gpio->io_state[port] &= ~mask;
+	if (value)
+		ws16c48gpio->out_state[port] |= mask;
+	else
+		ws16c48gpio->out_state[port] &= ~mask;
+	outb(ws16c48gpio->out_state[port], ws16c48gpio->base + port);
+
+	raw_spin_unlock_irqrestore(&ws16c48gpio->lock, flags);
+
+	return 0;
+}
+
+static int ws16c48_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct ws16c48_gpio *const ws16c48gpio = gpiochip_get_data(chip);
+	const unsigned port = offset / 8;
+	const unsigned mask = BIT(offset % 8);
+	unsigned long flags;
+	unsigned port_state;
+
+	raw_spin_lock_irqsave(&ws16c48gpio->lock, flags);
+
+	/* ensure that GPIO is set for input */
+	if (!(ws16c48gpio->io_state[port] & mask)) {
+		raw_spin_unlock_irqrestore(&ws16c48gpio->lock, flags);
+		return -EINVAL;
+	}
+
+	port_state = inb(ws16c48gpio->base + port);
+
+	raw_spin_unlock_irqrestore(&ws16c48gpio->lock, flags);
+
+	return !!(port_state & mask);
+}
+
+static int ws16c48_gpio_get_multiple(struct gpio_chip *chip,
+	unsigned long *mask, unsigned long *bits)
+{
+	struct ws16c48_gpio *const ws16c48gpio = gpiochip_get_data(chip);
+	unsigned long offset;
+	unsigned long gpio_mask;
+	unsigned int port_addr;
+	unsigned long port_state;
+
+	/* clear bits array to a clean slate */
+	bitmap_zero(bits, chip->ngpio);
+
+	for_each_set_clump8(offset, gpio_mask, mask, chip->ngpio) {
+		port_addr = ws16c48gpio->base + offset / 8;
+		port_state = inb(port_addr) & gpio_mask;
+
+		bitmap_set_value8(bits, port_state, offset);
+	}
+
+	return 0;
+}
+
+static void ws16c48_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct ws16c48_gpio *const ws16c48gpio = gpiochip_get_data(chip);
+	const unsigned port = offset / 8;
+	const unsigned mask = BIT(offset % 8);
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&ws16c48gpio->lock, flags);
+
+	/* ensure that GPIO is set for output */
+	if (ws16c48gpio->io_state[port] & mask) {
+		raw_spin_unlock_irqrestore(&ws16c48gpio->lock, flags);
+		return;
+	}
+
+	if (value)
+		ws16c48gpio->out_state[port] |= mask;
+	else
+		ws16c48gpio->out_state[port] &= ~mask;
+	outb(ws16c48gpio->out_state[port], ws16c48gpio->base + port);
+
+	raw_spin_unlock_irqrestore(&ws16c48gpio->lock, flags);
+}
+
+static void ws16c48_gpio_set_multiple(struct gpio_chip *chip,
+	unsigned long *mask, unsigned long *bits)
+{
+	struct ws16c48_gpio *const ws16c48gpio = gpiochip_get_data(chip);
+	unsigned long offset;
+	unsigned long gpio_mask;
+	size_t index;
+	unsigned int port_addr;
+	unsigned long bitmask;
+	unsigned long flags;
+
+	for_each_set_clump8(offset, gpio_mask, mask, chip->ngpio) {
+		index = offset / 8;
+		port_addr = ws16c48gpio->base + index;
+
+		/* mask out GPIO configured for input */
+		gpio_mask &= ~ws16c48gpio->io_state[index];
+		bitmask = bitmap_get_value8(bits, offset) & gpio_mask;
+
+		raw_spin_lock_irqsave(&ws16c48gpio->lock, flags);
+
+		/* update output state data and set device gpio register */
+		ws16c48gpio->out_state[index] &= ~gpio_mask;
+		ws16c48gpio->out_state[index] |= bitmask;
+		outb(ws16c48gpio->out_state[index], port_addr);
+
+		raw_spin_unlock_irqrestore(&ws16c48gpio->lock, flags);
+	}
+}
+
+static void ws16c48_irq_ack(struct irq_data *data)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+	struct ws16c48_gpio *const ws16c48gpio = gpiochip_get_data(chip);
+	const unsigned long offset = irqd_to_hwirq(data);
+	const unsigned port = offset / 8;
+	const unsigned mask = BIT(offset % 8);
+	unsigned long flags;
+	unsigned port_state;
+
+	/* only the first 3 ports support interrupts */
+	if (port > 2)
+		return;
+
+	raw_spin_lock_irqsave(&ws16c48gpio->lock, flags);
+
+	port_state = ws16c48gpio->irq_mask >> (8*port);
+
+	outb(0x80, ws16c48gpio->base + 7);
+	outb(port_state & ~mask, ws16c48gpio->base + 8 + port);
+	outb(port_state | mask, ws16c48gpio->base + 8 + port);
+	outb(0xC0, ws16c48gpio->base + 7);
+
+	raw_spin_unlock_irqrestore(&ws16c48gpio->lock, flags);
+}
+
+static void ws16c48_irq_mask(struct irq_data *data)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+	struct ws16c48_gpio *const ws16c48gpio = gpiochip_get_data(chip);
+	const unsigned long offset = irqd_to_hwirq(data);
+	const unsigned long mask = BIT(offset);
+	const unsigned port = offset / 8;
+	unsigned long flags;
+
+	/* only the first 3 ports support interrupts */
+	if (port > 2)
+		return;
+
+	raw_spin_lock_irqsave(&ws16c48gpio->lock, flags);
+
+	ws16c48gpio->irq_mask &= ~mask;
+
+	outb(0x80, ws16c48gpio->base + 7);
+	outb(ws16c48gpio->irq_mask >> (8*port), ws16c48gpio->base + 8 + port);
+	outb(0xC0, ws16c48gpio->base + 7);
+
+	raw_spin_unlock_irqrestore(&ws16c48gpio->lock, flags);
+}
+
+static void ws16c48_irq_unmask(struct irq_data *data)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+	struct ws16c48_gpio *const ws16c48gpio = gpiochip_get_data(chip);
+	const unsigned long offset = irqd_to_hwirq(data);
+	const unsigned long mask = BIT(offset);
+	const unsigned port = offset / 8;
+	unsigned long flags;
+
+	/* only the first 3 ports support interrupts */
+	if (port > 2)
+		return;
+
+	raw_spin_lock_irqsave(&ws16c48gpio->lock, flags);
+
+	ws16c48gpio->irq_mask |= mask;
+
+	outb(0x80, ws16c48gpio->base + 7);
+	outb(ws16c48gpio->irq_mask >> (8*port), ws16c48gpio->base + 8 + port);
+	outb(0xC0, ws16c48gpio->base + 7);
+
+	raw_spin_unlock_irqrestore(&ws16c48gpio->lock, flags);
+}
+
+static int ws16c48_irq_set_type(struct irq_data *data, unsigned flow_type)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+	struct ws16c48_gpio *const ws16c48gpio = gpiochip_get_data(chip);
+	const unsigned long offset = irqd_to_hwirq(data);
+	const unsigned long mask = BIT(offset);
+	const unsigned port = offset / 8;
+	unsigned long flags;
+
+	/* only the first 3 ports support interrupts */
+	if (port > 2)
+		return -EINVAL;
+
+	raw_spin_lock_irqsave(&ws16c48gpio->lock, flags);
+
+	switch (flow_type) {
+	case IRQ_TYPE_NONE:
+		break;
+	case IRQ_TYPE_EDGE_RISING:
+		ws16c48gpio->flow_mask |= mask;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		ws16c48gpio->flow_mask &= ~mask;
+		break;
+	default:
+		raw_spin_unlock_irqrestore(&ws16c48gpio->lock, flags);
+		return -EINVAL;
+	}
+
+	outb(0x40, ws16c48gpio->base + 7);
+	outb(ws16c48gpio->flow_mask >> (8*port), ws16c48gpio->base + 8 + port);
+	outb(0xC0, ws16c48gpio->base + 7);
+
+	raw_spin_unlock_irqrestore(&ws16c48gpio->lock, flags);
+
+	return 0;
+}
+
+static struct irq_chip ws16c48_irqchip = {
+	.name = "ws16c48",
+	.irq_ack = ws16c48_irq_ack,
+	.irq_mask = ws16c48_irq_mask,
+	.irq_unmask = ws16c48_irq_unmask,
+	.irq_set_type = ws16c48_irq_set_type
+};
+
+static irqreturn_t ws16c48_irq_handler(int irq, void *dev_id)
+{
+	struct ws16c48_gpio *const ws16c48gpio = dev_id;
+	struct gpio_chip *const chip = &ws16c48gpio->chip;
+	unsigned long int_pending;
+	unsigned long port;
+	unsigned long int_id;
+	unsigned long gpio;
+
+	int_pending = inb(ws16c48gpio->base + 6) & 0x7;
+	if (!int_pending)
+		return IRQ_NONE;
+
+	/* loop until all pending interrupts are handled */
+	do {
+		for_each_set_bit(port, &int_pending, 3) {
+			int_id = inb(ws16c48gpio->base + 8 + port);
+			for_each_set_bit(gpio, &int_id, 8)
+				generic_handle_irq(irq_find_mapping(
+					chip->irq.domain, gpio + 8*port));
+		}
+
+		int_pending = inb(ws16c48gpio->base + 6) & 0x7;
+	} while (int_pending);
+
+	return IRQ_HANDLED;
+}
+
+#define WS16C48_NGPIO 48
+static const char *ws16c48_names[WS16C48_NGPIO] = {
+	"Port 0 Bit 0", "Port 0 Bit 1", "Port 0 Bit 2", "Port 0 Bit 3",
+	"Port 0 Bit 4", "Port 0 Bit 5", "Port 0 Bit 6", "Port 0 Bit 7",
+	"Port 1 Bit 0", "Port 1 Bit 1", "Port 1 Bit 2", "Port 1 Bit 3",
+	"Port 1 Bit 4", "Port 1 Bit 5", "Port 1 Bit 6", "Port 1 Bit 7",
+	"Port 2 Bit 0", "Port 2 Bit 1", "Port 2 Bit 2", "Port 2 Bit 3",
+	"Port 2 Bit 4", "Port 2 Bit 5", "Port 2 Bit 6", "Port 2 Bit 7",
+	"Port 3 Bit 0", "Port 3 Bit 1", "Port 3 Bit 2", "Port 3 Bit 3",
+	"Port 3 Bit 4", "Port 3 Bit 5", "Port 3 Bit 6", "Port 3 Bit 7",
+	"Port 4 Bit 0", "Port 4 Bit 1", "Port 4 Bit 2", "Port 4 Bit 3",
+	"Port 4 Bit 4", "Port 4 Bit 5", "Port 4 Bit 6", "Port 4 Bit 7",
+	"Port 5 Bit 0", "Port 5 Bit 1", "Port 5 Bit 2", "Port 5 Bit 3",
+	"Port 5 Bit 4", "Port 5 Bit 5", "Port 5 Bit 6", "Port 5 Bit 7"
+};
+
+static int ws16c48_irq_init_hw(struct gpio_chip *gc)
+{
+	struct ws16c48_gpio *const ws16c48gpio = gpiochip_get_data(gc);
+
+	/* Disable IRQ by default */
+	outb(0x80, ws16c48gpio->base + 7);
+	outb(0, ws16c48gpio->base + 8);
+	outb(0, ws16c48gpio->base + 9);
+	outb(0, ws16c48gpio->base + 10);
+	outb(0xC0, ws16c48gpio->base + 7);
+
+	return 0;
+}
+
+static int ws16c48_probe(struct device *dev, unsigned int id)
+{
+	struct ws16c48_gpio *ws16c48gpio;
+	const char *const name = dev_name(dev);
+	struct gpio_irq_chip *girq;
+	int err;
+
+	ws16c48gpio = devm_kzalloc(dev, sizeof(*ws16c48gpio), GFP_KERNEL);
+	if (!ws16c48gpio)
+		return -ENOMEM;
+
+	if (!devm_request_region(dev, base[id], WS16C48_EXTENT, name)) {
+		dev_err(dev, "Unable to lock port addresses (0x%X-0x%X)\n",
+			base[id], base[id] + WS16C48_EXTENT);
+		return -EBUSY;
+	}
+
+	ws16c48gpio->chip.label = name;
+	ws16c48gpio->chip.parent = dev;
+	ws16c48gpio->chip.owner = THIS_MODULE;
+	ws16c48gpio->chip.base = -1;
+	ws16c48gpio->chip.ngpio = WS16C48_NGPIO;
+	ws16c48gpio->chip.names = ws16c48_names;
+	ws16c48gpio->chip.get_direction = ws16c48_gpio_get_direction;
+	ws16c48gpio->chip.direction_input = ws16c48_gpio_direction_input;
+	ws16c48gpio->chip.direction_output = ws16c48_gpio_direction_output;
+	ws16c48gpio->chip.get = ws16c48_gpio_get;
+	ws16c48gpio->chip.get_multiple = ws16c48_gpio_get_multiple;
+	ws16c48gpio->chip.set = ws16c48_gpio_set;
+	ws16c48gpio->chip.set_multiple = ws16c48_gpio_set_multiple;
+	ws16c48gpio->base = base[id];
+
+	girq = &ws16c48gpio->chip.irq;
+	girq->chip = &ws16c48_irqchip;
+	/* This will let us handle the parent IRQ in the driver */
+	girq->parent_handler = NULL;
+	girq->num_parents = 0;
+	girq->parents = NULL;
+	girq->default_type = IRQ_TYPE_NONE;
+	girq->handler = handle_edge_irq;
+	girq->init_hw = ws16c48_irq_init_hw;
+
+	raw_spin_lock_init(&ws16c48gpio->lock);
+
+	err = devm_gpiochip_add_data(dev, &ws16c48gpio->chip, ws16c48gpio);
+	if (err) {
+		dev_err(dev, "GPIO registering failed (%d)\n", err);
+		return err;
+	}
+
+	err = devm_request_irq(dev, irq[id], ws16c48_irq_handler, IRQF_SHARED,
+		name, ws16c48gpio);
+	if (err) {
+		dev_err(dev, "IRQ handler registering failed (%d)\n", err);
+		return err;
+	}
+
+	return 0;
+}
+
+static struct isa_driver ws16c48_driver = {
+	.probe = ws16c48_probe,
+	.driver = {
+		.name = "ws16c48"
+	},
+};
+
+module_isa_driver(ws16c48_driver, num_ws16c48);
+
+MODULE_AUTHOR("William Breathitt Gray <vilhelm.gray@gmail.com>");
+MODULE_DESCRIPTION("WinSystems WS16C48 GPIO driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-xgene-sb.c b/drivers/gpio/gpio-xgene-sb.c
new file mode 100644
index 000000000..a809609ee
--- /dev/null
+++ b/drivers/gpio/gpio-xgene-sb.c
@@ -0,0 +1,337 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * AppliedMicro X-Gene SoC GPIO-Standby Driver
+ *
+ * Copyright (c) 2014, Applied Micro Circuits Corporation
+ * Author:	Tin Huynh <tnhuynh@apm.com>.
+ *		Y Vo <yvo@apm.com>.
+ *		Quan Nguyen <qnguyen@apm.com>.
+ */
+
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/gpio/driver.h>
+#include <linux/acpi.h>
+
+#include "gpiolib.h"
+#include "gpiolib-acpi.h"
+
+/* Common property names */
+#define XGENE_NIRQ_PROPERTY		"apm,nr-irqs"
+#define XGENE_NGPIO_PROPERTY		"apm,nr-gpios"
+#define XGENE_IRQ_START_PROPERTY	"apm,irq-start"
+
+#define XGENE_DFLT_MAX_NGPIO		22
+#define XGENE_DFLT_MAX_NIRQ		6
+#define XGENE_DFLT_IRQ_START_PIN	8
+#define GPIO_MASK(x)			(1U << ((x) % 32))
+
+#define MPA_GPIO_INT_LVL		0x0290
+#define MPA_GPIO_OE_ADDR		0x029c
+#define MPA_GPIO_OUT_ADDR		0x02a0
+#define MPA_GPIO_IN_ADDR 		0x02a4
+#define MPA_GPIO_SEL_LO 		0x0294
+
+#define GPIO_INT_LEVEL_H	0x000001
+#define GPIO_INT_LEVEL_L	0x000000
+
+/**
+ * struct xgene_gpio_sb - GPIO-Standby private data structure.
+ * @gc:				memory-mapped GPIO controllers.
+ * @regs:			GPIO register base offset
+ * @irq_domain:			GPIO interrupt domain
+ * @irq_start:			GPIO pin that start support interrupt
+ * @nirq:			Number of GPIO pins that supports interrupt
+ * @parent_irq_base:		Start parent HWIRQ
+ */
+struct xgene_gpio_sb {
+	struct gpio_chip	gc;
+	void __iomem		*regs;
+	struct irq_domain	*irq_domain;
+	u16			irq_start;
+	u16			nirq;
+	u16			parent_irq_base;
+};
+
+#define HWIRQ_TO_GPIO(priv, hwirq) ((hwirq) + (priv)->irq_start)
+#define GPIO_TO_HWIRQ(priv, gpio) ((gpio) - (priv)->irq_start)
+
+static void xgene_gpio_set_bit(struct gpio_chip *gc,
+				void __iomem *reg, u32 gpio, int val)
+{
+	u32 data;
+
+	data = gc->read_reg(reg);
+	if (val)
+		data |= GPIO_MASK(gpio);
+	else
+		data &= ~GPIO_MASK(gpio);
+	gc->write_reg(reg, data);
+}
+
+static int xgene_gpio_sb_irq_set_type(struct irq_data *d, unsigned int type)
+{
+	struct xgene_gpio_sb *priv = irq_data_get_irq_chip_data(d);
+	int gpio = HWIRQ_TO_GPIO(priv, d->hwirq);
+	int lvl_type = GPIO_INT_LEVEL_H;
+
+	switch (type & IRQ_TYPE_SENSE_MASK) {
+	case IRQ_TYPE_EDGE_RISING:
+	case IRQ_TYPE_LEVEL_HIGH:
+		lvl_type = GPIO_INT_LEVEL_H;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+	case IRQ_TYPE_LEVEL_LOW:
+		lvl_type = GPIO_INT_LEVEL_L;
+		break;
+	default:
+		break;
+	}
+
+	xgene_gpio_set_bit(&priv->gc, priv->regs + MPA_GPIO_SEL_LO,
+			gpio * 2, 1);
+	xgene_gpio_set_bit(&priv->gc, priv->regs + MPA_GPIO_INT_LVL,
+			d->hwirq, lvl_type);
+
+	/* Propagate IRQ type setting to parent */
+	if (type & IRQ_TYPE_EDGE_BOTH)
+		return irq_chip_set_type_parent(d, IRQ_TYPE_EDGE_RISING);
+	else
+		return irq_chip_set_type_parent(d, IRQ_TYPE_LEVEL_HIGH);
+}
+
+static struct irq_chip xgene_gpio_sb_irq_chip = {
+	.name           = "sbgpio",
+	.irq_eoi	= irq_chip_eoi_parent,
+	.irq_mask       = irq_chip_mask_parent,
+	.irq_unmask     = irq_chip_unmask_parent,
+	.irq_set_type   = xgene_gpio_sb_irq_set_type,
+};
+
+static int xgene_gpio_sb_to_irq(struct gpio_chip *gc, u32 gpio)
+{
+	struct xgene_gpio_sb *priv = gpiochip_get_data(gc);
+	struct irq_fwspec fwspec;
+
+	if ((gpio < priv->irq_start) ||
+			(gpio > HWIRQ_TO_GPIO(priv, priv->nirq)))
+		return -ENXIO;
+
+	fwspec.fwnode = gc->parent->fwnode;
+	fwspec.param_count = 2;
+	fwspec.param[0] = GPIO_TO_HWIRQ(priv, gpio);
+	fwspec.param[1] = IRQ_TYPE_EDGE_RISING;
+	return irq_create_fwspec_mapping(&fwspec);
+}
+
+static int xgene_gpio_sb_domain_activate(struct irq_domain *d,
+					 struct irq_data *irq_data,
+					 bool reserve)
+{
+	struct xgene_gpio_sb *priv = d->host_data;
+	u32 gpio = HWIRQ_TO_GPIO(priv, irq_data->hwirq);
+	int ret;
+
+	ret = gpiochip_lock_as_irq(&priv->gc, gpio);
+	if (ret) {
+		dev_err(priv->gc.parent,
+		"Unable to configure XGene GPIO standby pin %d as IRQ\n",
+				gpio);
+		return ret;
+	}
+
+	xgene_gpio_set_bit(&priv->gc, priv->regs + MPA_GPIO_SEL_LO,
+			gpio * 2, 1);
+	return 0;
+}
+
+static void xgene_gpio_sb_domain_deactivate(struct irq_domain *d,
+		struct irq_data *irq_data)
+{
+	struct xgene_gpio_sb *priv = d->host_data;
+	u32 gpio = HWIRQ_TO_GPIO(priv, irq_data->hwirq);
+
+	gpiochip_unlock_as_irq(&priv->gc, gpio);
+	xgene_gpio_set_bit(&priv->gc, priv->regs + MPA_GPIO_SEL_LO,
+			gpio * 2, 0);
+}
+
+static int xgene_gpio_sb_domain_translate(struct irq_domain *d,
+		struct irq_fwspec *fwspec,
+		unsigned long *hwirq,
+		unsigned int *type)
+{
+	struct xgene_gpio_sb *priv = d->host_data;
+
+	if ((fwspec->param_count != 2) ||
+		(fwspec->param[0] >= priv->nirq))
+		return -EINVAL;
+	*hwirq = fwspec->param[0];
+	*type = fwspec->param[1];
+	return 0;
+}
+
+static int xgene_gpio_sb_domain_alloc(struct irq_domain *domain,
+					unsigned int virq,
+					unsigned int nr_irqs, void *data)
+{
+	struct irq_fwspec *fwspec = data;
+	struct irq_fwspec parent_fwspec;
+	struct xgene_gpio_sb *priv = domain->host_data;
+	irq_hw_number_t hwirq;
+	unsigned int i;
+
+	hwirq = fwspec->param[0];
+	for (i = 0; i < nr_irqs; i++)
+		irq_domain_set_hwirq_and_chip(domain, virq + i, hwirq + i,
+				&xgene_gpio_sb_irq_chip, priv);
+
+	parent_fwspec.fwnode = domain->parent->fwnode;
+	if (is_of_node(parent_fwspec.fwnode)) {
+		parent_fwspec.param_count = 3;
+		parent_fwspec.param[0] = 0;/* SPI */
+		/* Skip SGIs and PPIs*/
+		parent_fwspec.param[1] = hwirq + priv->parent_irq_base - 32;
+		parent_fwspec.param[2] = fwspec->param[1];
+	} else if (is_fwnode_irqchip(parent_fwspec.fwnode)) {
+		parent_fwspec.param_count = 2;
+		parent_fwspec.param[0] = hwirq + priv->parent_irq_base;
+		parent_fwspec.param[1] = fwspec->param[1];
+	} else
+		return -EINVAL;
+
+	return irq_domain_alloc_irqs_parent(domain, virq, nr_irqs,
+			&parent_fwspec);
+}
+
+static const struct irq_domain_ops xgene_gpio_sb_domain_ops = {
+	.translate      = xgene_gpio_sb_domain_translate,
+	.alloc          = xgene_gpio_sb_domain_alloc,
+	.free           = irq_domain_free_irqs_common,
+	.activate	= xgene_gpio_sb_domain_activate,
+	.deactivate	= xgene_gpio_sb_domain_deactivate,
+};
+
+static int xgene_gpio_sb_probe(struct platform_device *pdev)
+{
+	struct xgene_gpio_sb *priv;
+	int ret;
+	void __iomem *regs;
+	struct irq_domain *parent_domain = NULL;
+	u32 val32;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(regs))
+		return PTR_ERR(regs);
+
+	priv->regs = regs;
+
+	ret = platform_get_irq(pdev, 0);
+	if (ret > 0) {
+		priv->parent_irq_base = irq_get_irq_data(ret)->hwirq;
+		parent_domain = irq_get_irq_data(ret)->domain;
+	}
+	if (!parent_domain) {
+		dev_err(&pdev->dev, "unable to obtain parent domain\n");
+		return -ENODEV;
+	}
+
+	ret = bgpio_init(&priv->gc, &pdev->dev, 4,
+			regs + MPA_GPIO_IN_ADDR,
+			regs + MPA_GPIO_OUT_ADDR, NULL,
+			regs + MPA_GPIO_OE_ADDR, NULL, 0);
+        if (ret)
+                return ret;
+
+	priv->gc.to_irq = xgene_gpio_sb_to_irq;
+
+	/* Retrieve start irq pin, use default if property not found */
+	priv->irq_start = XGENE_DFLT_IRQ_START_PIN;
+	if (!device_property_read_u32(&pdev->dev,
+					XGENE_IRQ_START_PROPERTY, &val32))
+		priv->irq_start = val32;
+
+	/* Retrieve number irqs, use default if property not found */
+	priv->nirq = XGENE_DFLT_MAX_NIRQ;
+	if (!device_property_read_u32(&pdev->dev, XGENE_NIRQ_PROPERTY, &val32))
+		priv->nirq = val32;
+
+	/* Retrieve number gpio, use default if property not found */
+	priv->gc.ngpio = XGENE_DFLT_MAX_NGPIO;
+	if (!device_property_read_u32(&pdev->dev, XGENE_NGPIO_PROPERTY, &val32))
+		priv->gc.ngpio = val32;
+
+	dev_info(&pdev->dev, "Support %d gpios, %d irqs start from pin %d\n",
+			priv->gc.ngpio, priv->nirq, priv->irq_start);
+
+	platform_set_drvdata(pdev, priv);
+
+	priv->irq_domain = irq_domain_create_hierarchy(parent_domain,
+					0, priv->nirq, pdev->dev.fwnode,
+					&xgene_gpio_sb_domain_ops, priv);
+	if (!priv->irq_domain)
+		return -ENODEV;
+
+	priv->gc.irq.domain = priv->irq_domain;
+
+	ret = devm_gpiochip_add_data(&pdev->dev, &priv->gc, priv);
+	if (ret) {
+		dev_err(&pdev->dev,
+			"failed to register X-Gene GPIO Standby driver\n");
+		irq_domain_remove(priv->irq_domain);
+		return ret;
+	}
+
+	dev_info(&pdev->dev, "X-Gene GPIO Standby driver registered\n");
+
+	/* Register interrupt handlers for GPIO signaled ACPI Events */
+	acpi_gpiochip_request_interrupts(&priv->gc);
+
+	return ret;
+}
+
+static int xgene_gpio_sb_remove(struct platform_device *pdev)
+{
+	struct xgene_gpio_sb *priv = platform_get_drvdata(pdev);
+
+	acpi_gpiochip_free_interrupts(&priv->gc);
+
+	irq_domain_remove(priv->irq_domain);
+
+	return 0;
+}
+
+static const struct of_device_id xgene_gpio_sb_of_match[] = {
+	{.compatible = "apm,xgene-gpio-sb", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, xgene_gpio_sb_of_match);
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id xgene_gpio_sb_acpi_match[] = {
+	{"APMC0D15", 0},
+	{},
+};
+MODULE_DEVICE_TABLE(acpi, xgene_gpio_sb_acpi_match);
+#endif
+
+static struct platform_driver xgene_gpio_sb_driver = {
+	.driver = {
+		   .name = "xgene-gpio-sb",
+		   .of_match_table = xgene_gpio_sb_of_match,
+		   .acpi_match_table = ACPI_PTR(xgene_gpio_sb_acpi_match),
+		   },
+	.probe = xgene_gpio_sb_probe,
+	.remove = xgene_gpio_sb_remove,
+};
+module_platform_driver(xgene_gpio_sb_driver);
+
+MODULE_AUTHOR("AppliedMicro");
+MODULE_DESCRIPTION("APM X-Gene GPIO Standby driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/gpio-xgene.c b/drivers/gpio/gpio-xgene.c
new file mode 100644
index 000000000..532b0df8a
--- /dev/null
+++ b/drivers/gpio/gpio-xgene.c
@@ -0,0 +1,218 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * AppliedMicro X-Gene SoC GPIO Driver
+ *
+ * Copyright (c) 2014, Applied Micro Circuits Corporation
+ * Author: Feng Kan <fkan@apm.com>.
+ */
+
+#include <linux/acpi.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+#include <linux/gpio/driver.h>
+#include <linux/types.h>
+#include <linux/bitops.h>
+
+#define GPIO_SET_DR_OFFSET	0x0C
+#define GPIO_DATA_OFFSET	0x14
+#define GPIO_BANK_STRIDE	0x0C
+
+#define XGENE_GPIOS_PER_BANK	16
+#define XGENE_MAX_GPIO_BANKS	3
+#define XGENE_MAX_GPIOS		(XGENE_GPIOS_PER_BANK * XGENE_MAX_GPIO_BANKS)
+
+#define GPIO_BIT_OFFSET(x)	(x % XGENE_GPIOS_PER_BANK)
+#define GPIO_BANK_OFFSET(x)	((x / XGENE_GPIOS_PER_BANK) * GPIO_BANK_STRIDE)
+
+struct xgene_gpio {
+	struct gpio_chip	chip;
+	void __iomem		*base;
+	spinlock_t		lock;
+	u32			set_dr_val[XGENE_MAX_GPIO_BANKS];
+};
+
+static int xgene_gpio_get(struct gpio_chip *gc, unsigned int offset)
+{
+	struct xgene_gpio *chip = gpiochip_get_data(gc);
+	unsigned long bank_offset;
+	u32 bit_offset;
+
+	bank_offset = GPIO_DATA_OFFSET + GPIO_BANK_OFFSET(offset);
+	bit_offset = GPIO_BIT_OFFSET(offset);
+	return !!(ioread32(chip->base + bank_offset) & BIT(bit_offset));
+}
+
+static void __xgene_gpio_set(struct gpio_chip *gc, unsigned int offset, int val)
+{
+	struct xgene_gpio *chip = gpiochip_get_data(gc);
+	unsigned long bank_offset;
+	u32 setval, bit_offset;
+
+	bank_offset = GPIO_SET_DR_OFFSET + GPIO_BANK_OFFSET(offset);
+	bit_offset = GPIO_BIT_OFFSET(offset) + XGENE_GPIOS_PER_BANK;
+
+	setval = ioread32(chip->base + bank_offset);
+	if (val)
+		setval |= BIT(bit_offset);
+	else
+		setval &= ~BIT(bit_offset);
+	iowrite32(setval, chip->base + bank_offset);
+}
+
+static void xgene_gpio_set(struct gpio_chip *gc, unsigned int offset, int val)
+{
+	struct xgene_gpio *chip = gpiochip_get_data(gc);
+	unsigned long flags;
+
+	spin_lock_irqsave(&chip->lock, flags);
+	__xgene_gpio_set(gc, offset, val);
+	spin_unlock_irqrestore(&chip->lock, flags);
+}
+
+static int xgene_gpio_get_direction(struct gpio_chip *gc, unsigned int offset)
+{
+	struct xgene_gpio *chip = gpiochip_get_data(gc);
+	unsigned long bank_offset, bit_offset;
+
+	bank_offset = GPIO_SET_DR_OFFSET + GPIO_BANK_OFFSET(offset);
+	bit_offset = GPIO_BIT_OFFSET(offset);
+
+	if (ioread32(chip->base + bank_offset) & BIT(bit_offset))
+		return GPIO_LINE_DIRECTION_IN;
+
+	return GPIO_LINE_DIRECTION_OUT;
+}
+
+static int xgene_gpio_dir_in(struct gpio_chip *gc, unsigned int offset)
+{
+	struct xgene_gpio *chip = gpiochip_get_data(gc);
+	unsigned long flags, bank_offset;
+	u32 dirval, bit_offset;
+
+	bank_offset = GPIO_SET_DR_OFFSET + GPIO_BANK_OFFSET(offset);
+	bit_offset = GPIO_BIT_OFFSET(offset);
+
+	spin_lock_irqsave(&chip->lock, flags);
+
+	dirval = ioread32(chip->base + bank_offset);
+	dirval |= BIT(bit_offset);
+	iowrite32(dirval, chip->base + bank_offset);
+
+	spin_unlock_irqrestore(&chip->lock, flags);
+
+	return 0;
+}
+
+static int xgene_gpio_dir_out(struct gpio_chip *gc,
+					unsigned int offset, int val)
+{
+	struct xgene_gpio *chip = gpiochip_get_data(gc);
+	unsigned long flags, bank_offset;
+	u32 dirval, bit_offset;
+
+	bank_offset = GPIO_SET_DR_OFFSET + GPIO_BANK_OFFSET(offset);
+	bit_offset = GPIO_BIT_OFFSET(offset);
+
+	spin_lock_irqsave(&chip->lock, flags);
+
+	dirval = ioread32(chip->base + bank_offset);
+	dirval &= ~BIT(bit_offset);
+	iowrite32(dirval, chip->base + bank_offset);
+	__xgene_gpio_set(gc, offset, val);
+
+	spin_unlock_irqrestore(&chip->lock, flags);
+
+	return 0;
+}
+
+static __maybe_unused int xgene_gpio_suspend(struct device *dev)
+{
+	struct xgene_gpio *gpio = dev_get_drvdata(dev);
+	unsigned long bank_offset;
+	unsigned int bank;
+
+	for (bank = 0; bank < XGENE_MAX_GPIO_BANKS; bank++) {
+		bank_offset = GPIO_SET_DR_OFFSET + bank * GPIO_BANK_STRIDE;
+		gpio->set_dr_val[bank] = ioread32(gpio->base + bank_offset);
+	}
+	return 0;
+}
+
+static __maybe_unused int xgene_gpio_resume(struct device *dev)
+{
+	struct xgene_gpio *gpio = dev_get_drvdata(dev);
+	unsigned long bank_offset;
+	unsigned int bank;
+
+	for (bank = 0; bank < XGENE_MAX_GPIO_BANKS; bank++) {
+		bank_offset = GPIO_SET_DR_OFFSET + bank * GPIO_BANK_STRIDE;
+		iowrite32(gpio->set_dr_val[bank], gpio->base + bank_offset);
+	}
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(xgene_gpio_pm, xgene_gpio_suspend, xgene_gpio_resume);
+
+static int xgene_gpio_probe(struct platform_device *pdev)
+{
+	struct xgene_gpio *gpio;
+	int err = 0;
+
+	gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
+	if (!gpio)
+		return -ENOMEM;
+
+	gpio->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(gpio->base))
+		return PTR_ERR(gpio->base);
+
+	gpio->chip.ngpio = XGENE_MAX_GPIOS;
+
+	spin_lock_init(&gpio->lock);
+	gpio->chip.parent = &pdev->dev;
+	gpio->chip.get_direction = xgene_gpio_get_direction;
+	gpio->chip.direction_input = xgene_gpio_dir_in;
+	gpio->chip.direction_output = xgene_gpio_dir_out;
+	gpio->chip.get = xgene_gpio_get;
+	gpio->chip.set = xgene_gpio_set;
+	gpio->chip.label = dev_name(&pdev->dev);
+	gpio->chip.base = -1;
+
+	platform_set_drvdata(pdev, gpio);
+
+	err = devm_gpiochip_add_data(&pdev->dev, &gpio->chip, gpio);
+	if (err) {
+		dev_err(&pdev->dev,
+			"failed to register gpiochip.\n");
+		return err;
+	}
+
+	dev_info(&pdev->dev, "X-Gene GPIO driver registered.\n");
+	return 0;
+}
+
+static const struct of_device_id xgene_gpio_of_match[] = {
+	{ .compatible = "apm,xgene-gpio", },
+	{},
+};
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id xgene_gpio_acpi_match[] = {
+	{ "APMC0D14", 0 },
+	{ },
+};
+#endif
+
+static struct platform_driver xgene_gpio_driver = {
+	.driver = {
+		.name = "xgene-gpio",
+		.of_match_table = xgene_gpio_of_match,
+		.acpi_match_table = ACPI_PTR(xgene_gpio_acpi_match),
+		.pm     = &xgene_gpio_pm,
+	},
+	.probe = xgene_gpio_probe,
+};
+builtin_platform_driver(xgene_gpio_driver);
diff --git a/drivers/gpio/gpio-xgs-iproc.c b/drivers/gpio/gpio-xgs-iproc.c
new file mode 100644
index 000000000..dd40277b9
--- /dev/null
+++ b/drivers/gpio/gpio-xgs-iproc.c
@@ -0,0 +1,319 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 Broadcom
+ */
+
+#include <linux/gpio/driver.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+
+#define IPROC_CCA_INT_F_GPIOINT		BIT(0)
+#define IPROC_CCA_INT_STS		0x20
+#define IPROC_CCA_INT_MASK		0x24
+
+#define IPROC_GPIO_CCA_DIN		0x0
+#define IPROC_GPIO_CCA_DOUT		0x4
+#define IPROC_GPIO_CCA_OUT_EN		0x8
+#define IPROC_GPIO_CCA_INT_LEVEL	0x10
+#define IPROC_GPIO_CCA_INT_LEVEL_MASK	0x14
+#define IPROC_GPIO_CCA_INT_EVENT	0x18
+#define IPROC_GPIO_CCA_INT_EVENT_MASK	0x1C
+#define IPROC_GPIO_CCA_INT_EDGE		0x24
+
+struct iproc_gpio_chip {
+	struct irq_chip irqchip;
+	struct gpio_chip gc;
+	spinlock_t lock;
+	struct device *dev;
+	void __iomem *base;
+	void __iomem *intr;
+};
+
+static inline struct iproc_gpio_chip *
+to_iproc_gpio(struct gpio_chip *gc)
+{
+	return container_of(gc, struct iproc_gpio_chip, gc);
+}
+
+static void iproc_gpio_irq_ack(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct iproc_gpio_chip *chip = to_iproc_gpio(gc);
+	int pin = d->hwirq;
+	unsigned long flags;
+	u32 irq = d->irq;
+	u32 irq_type, event_status = 0;
+
+	spin_lock_irqsave(&chip->lock, flags);
+	irq_type = irq_get_trigger_type(irq);
+	if (irq_type & IRQ_TYPE_EDGE_BOTH) {
+		event_status |= BIT(pin);
+		writel_relaxed(event_status,
+			       chip->base + IPROC_GPIO_CCA_INT_EVENT);
+	}
+	spin_unlock_irqrestore(&chip->lock, flags);
+}
+
+static void iproc_gpio_irq_unmask(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct iproc_gpio_chip *chip = to_iproc_gpio(gc);
+	int pin = d->hwirq;
+	unsigned long flags;
+	u32 irq = d->irq;
+	u32 int_mask, irq_type, event_mask;
+
+	spin_lock_irqsave(&chip->lock, flags);
+	irq_type = irq_get_trigger_type(irq);
+	event_mask = readl_relaxed(chip->base + IPROC_GPIO_CCA_INT_EVENT_MASK);
+	int_mask = readl_relaxed(chip->base + IPROC_GPIO_CCA_INT_LEVEL_MASK);
+
+	if (irq_type & IRQ_TYPE_EDGE_BOTH) {
+		event_mask |= 1 << pin;
+		writel_relaxed(event_mask,
+			       chip->base + IPROC_GPIO_CCA_INT_EVENT_MASK);
+	} else {
+		int_mask |= 1 << pin;
+		writel_relaxed(int_mask,
+			       chip->base + IPROC_GPIO_CCA_INT_LEVEL_MASK);
+	}
+	spin_unlock_irqrestore(&chip->lock, flags);
+}
+
+static void iproc_gpio_irq_mask(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct iproc_gpio_chip *chip = to_iproc_gpio(gc);
+	int pin = d->hwirq;
+	unsigned long flags;
+	u32 irq = d->irq;
+	u32 irq_type, int_mask, event_mask;
+
+	spin_lock_irqsave(&chip->lock, flags);
+	irq_type = irq_get_trigger_type(irq);
+	event_mask = readl_relaxed(chip->base + IPROC_GPIO_CCA_INT_EVENT_MASK);
+	int_mask = readl_relaxed(chip->base + IPROC_GPIO_CCA_INT_LEVEL_MASK);
+
+	if (irq_type & IRQ_TYPE_EDGE_BOTH) {
+		event_mask &= ~BIT(pin);
+		writel_relaxed(event_mask,
+			       chip->base + IPROC_GPIO_CCA_INT_EVENT_MASK);
+	} else {
+		int_mask &= ~BIT(pin);
+		writel_relaxed(int_mask,
+			       chip->base + IPROC_GPIO_CCA_INT_LEVEL_MASK);
+	}
+	spin_unlock_irqrestore(&chip->lock, flags);
+}
+
+static int iproc_gpio_irq_set_type(struct irq_data *d, u32 type)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct iproc_gpio_chip *chip = to_iproc_gpio(gc);
+	int pin = d->hwirq;
+	unsigned long flags;
+	u32 irq = d->irq;
+	u32 event_pol, int_pol;
+	int ret = 0;
+
+	spin_lock_irqsave(&chip->lock, flags);
+	switch (type & IRQ_TYPE_SENSE_MASK) {
+	case IRQ_TYPE_EDGE_RISING:
+		event_pol = readl_relaxed(chip->base + IPROC_GPIO_CCA_INT_EDGE);
+		event_pol &= ~BIT(pin);
+		writel_relaxed(event_pol, chip->base + IPROC_GPIO_CCA_INT_EDGE);
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		event_pol = readl_relaxed(chip->base + IPROC_GPIO_CCA_INT_EDGE);
+		event_pol |= BIT(pin);
+		writel_relaxed(event_pol, chip->base + IPROC_GPIO_CCA_INT_EDGE);
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		int_pol = readl_relaxed(chip->base + IPROC_GPIO_CCA_INT_LEVEL);
+		int_pol &= ~BIT(pin);
+		writel_relaxed(int_pol, chip->base + IPROC_GPIO_CCA_INT_LEVEL);
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		int_pol = readl_relaxed(chip->base + IPROC_GPIO_CCA_INT_LEVEL);
+		int_pol |= BIT(pin);
+		writel_relaxed(int_pol, chip->base + IPROC_GPIO_CCA_INT_LEVEL);
+		break;
+	default:
+		/* should not come here */
+		ret = -EINVAL;
+		goto out_unlock;
+	}
+
+	if (type & IRQ_TYPE_LEVEL_MASK)
+		irq_set_handler_locked(irq_get_irq_data(irq), handle_level_irq);
+	else if (type & IRQ_TYPE_EDGE_BOTH)
+		irq_set_handler_locked(irq_get_irq_data(irq), handle_edge_irq);
+
+out_unlock:
+	spin_unlock_irqrestore(&chip->lock, flags);
+
+	return ret;
+}
+
+static irqreturn_t iproc_gpio_irq_handler(int irq, void *data)
+{
+	struct gpio_chip *gc = (struct gpio_chip *)data;
+	struct iproc_gpio_chip *chip = to_iproc_gpio(gc);
+	int bit;
+	unsigned long int_bits = 0;
+	u32 int_status;
+
+	/* go through the entire GPIOs and handle all interrupts */
+	int_status = readl_relaxed(chip->intr + IPROC_CCA_INT_STS);
+	if (int_status & IPROC_CCA_INT_F_GPIOINT) {
+		u32 event, level;
+
+		/* Get level and edge interrupts */
+		event =
+		    readl_relaxed(chip->base + IPROC_GPIO_CCA_INT_EVENT_MASK);
+		event &= readl_relaxed(chip->base + IPROC_GPIO_CCA_INT_EVENT);
+		level = readl_relaxed(chip->base + IPROC_GPIO_CCA_DIN);
+		level ^= readl_relaxed(chip->base + IPROC_GPIO_CCA_INT_LEVEL);
+		level &=
+		    readl_relaxed(chip->base + IPROC_GPIO_CCA_INT_LEVEL_MASK);
+		int_bits = level | event;
+
+		for_each_set_bit(bit, &int_bits, gc->ngpio)
+			generic_handle_irq(irq_linear_revmap(gc->irq.domain, bit));
+	}
+
+	return int_bits ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static int iproc_gpio_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *dn = pdev->dev.of_node;
+	struct iproc_gpio_chip *chip;
+	u32 num_gpios;
+	int irq, ret;
+
+	chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	chip->dev = dev;
+	platform_set_drvdata(pdev, chip);
+	spin_lock_init(&chip->lock);
+
+	chip->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(chip->base))
+		return PTR_ERR(chip->base);
+
+	ret = bgpio_init(&chip->gc, dev, 4,
+			 chip->base + IPROC_GPIO_CCA_DIN,
+			 chip->base + IPROC_GPIO_CCA_DOUT,
+			 NULL,
+			 chip->base + IPROC_GPIO_CCA_OUT_EN,
+			 NULL,
+			 0);
+	if (ret) {
+		dev_err(dev, "unable to init GPIO chip\n");
+		return ret;
+	}
+
+	chip->gc.label = dev_name(dev);
+	if (!of_property_read_u32(dn, "ngpios", &num_gpios))
+		chip->gc.ngpio = num_gpios;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq > 0) {
+		struct gpio_irq_chip *girq;
+		struct irq_chip *irqc;
+		u32 val;
+
+		irqc = &chip->irqchip;
+		irqc->name = dev_name(dev);
+		irqc->irq_ack = iproc_gpio_irq_ack;
+		irqc->irq_mask = iproc_gpio_irq_mask;
+		irqc->irq_unmask = iproc_gpio_irq_unmask;
+		irqc->irq_set_type = iproc_gpio_irq_set_type;
+
+		chip->intr = devm_platform_ioremap_resource(pdev, 1);
+		if (IS_ERR(chip->intr))
+			return PTR_ERR(chip->intr);
+
+		/* Enable GPIO interrupts for CCA GPIO */
+		val = readl_relaxed(chip->intr + IPROC_CCA_INT_MASK);
+		val |= IPROC_CCA_INT_F_GPIOINT;
+		writel_relaxed(val, chip->intr + IPROC_CCA_INT_MASK);
+
+		/*
+		 * Directly request the irq here instead of passing
+		 * a flow-handler because the irq is shared.
+		 */
+		ret = devm_request_irq(dev, irq, iproc_gpio_irq_handler,
+				       IRQF_SHARED, chip->gc.label, &chip->gc);
+		if (ret) {
+			dev_err(dev, "Fail to request IRQ%d: %d\n", irq, ret);
+			return ret;
+		}
+
+		girq = &chip->gc.irq;
+		girq->chip = irqc;
+		/* This will let us handle the parent IRQ in the driver */
+		girq->parent_handler = NULL;
+		girq->num_parents = 0;
+		girq->parents = NULL;
+		girq->default_type = IRQ_TYPE_NONE;
+		girq->handler = handle_simple_irq;
+	}
+
+	ret = devm_gpiochip_add_data(dev, &chip->gc, chip);
+	if (ret) {
+		dev_err(dev, "unable to add GPIO chip\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int iproc_gpio_remove(struct platform_device *pdev)
+{
+	struct iproc_gpio_chip *chip;
+
+	chip = platform_get_drvdata(pdev);
+	if (!chip)
+		return -ENODEV;
+
+	if (chip->intr) {
+		u32 val;
+
+		val = readl_relaxed(chip->intr + IPROC_CCA_INT_MASK);
+		val &= ~IPROC_CCA_INT_F_GPIOINT;
+		writel_relaxed(val, chip->intr + IPROC_CCA_INT_MASK);
+	}
+
+	return 0;
+}
+
+static const struct of_device_id bcm_iproc_gpio_of_match[] = {
+	{ .compatible = "brcm,iproc-gpio-cca" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, bcm_iproc_gpio_of_match);
+
+static struct platform_driver bcm_iproc_gpio_driver = {
+	.driver = {
+		.name = "iproc-xgs-gpio",
+		.of_match_table = bcm_iproc_gpio_of_match,
+	},
+	.probe = iproc_gpio_probe,
+	.remove = iproc_gpio_remove,
+};
+
+module_platform_driver(bcm_iproc_gpio_driver);
+
+MODULE_DESCRIPTION("XGS IPROC GPIO driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-xilinx.c b/drivers/gpio/gpio-xilinx.c
new file mode 100644
index 000000000..67f9f82e0
--- /dev/null
+++ b/drivers/gpio/gpio-xilinx.c
@@ -0,0 +1,378 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Xilinx gpio driver for xps/axi_gpio IP.
+ *
+ * Copyright 2008 - 2013 Xilinx, Inc.
+ */
+
+#include <linux/bitops.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <linux/io.h>
+#include <linux/gpio/driver.h>
+#include <linux/slab.h>
+
+/* Register Offset Definitions */
+#define XGPIO_DATA_OFFSET   (0x0)	/* Data register  */
+#define XGPIO_TRI_OFFSET    (0x4)	/* I/O direction register  */
+
+#define XGPIO_CHANNEL_OFFSET	0x8
+
+/* Read/Write access to the GPIO registers */
+#if defined(CONFIG_ARCH_ZYNQ) || defined(CONFIG_X86)
+# define xgpio_readreg(offset)		readl(offset)
+# define xgpio_writereg(offset, val)	writel(val, offset)
+#else
+# define xgpio_readreg(offset)		__raw_readl(offset)
+# define xgpio_writereg(offset, val)	__raw_writel(val, offset)
+#endif
+
+/**
+ * struct xgpio_instance - Stores information about GPIO device
+ * @gc: GPIO chip
+ * @regs: register block
+ * @gpio_width: GPIO width for every channel
+ * @gpio_state: GPIO state shadow register
+ * @gpio_dir: GPIO direction shadow register
+ * @gpio_lock: Lock used for synchronization
+ */
+struct xgpio_instance {
+	struct gpio_chip gc;
+	void __iomem *regs;
+	unsigned int gpio_width[2];
+	u32 gpio_state[2];
+	u32 gpio_dir[2];
+	spinlock_t gpio_lock[2];
+};
+
+static inline int xgpio_index(struct xgpio_instance *chip, int gpio)
+{
+	if (gpio >= chip->gpio_width[0])
+		return 1;
+
+	return 0;
+}
+
+static inline int xgpio_regoffset(struct xgpio_instance *chip, int gpio)
+{
+	if (xgpio_index(chip, gpio))
+		return XGPIO_CHANNEL_OFFSET;
+
+	return 0;
+}
+
+static inline int xgpio_offset(struct xgpio_instance *chip, int gpio)
+{
+	if (xgpio_index(chip, gpio))
+		return gpio - chip->gpio_width[0];
+
+	return gpio;
+}
+
+/**
+ * xgpio_get - Read the specified signal of the GPIO device.
+ * @gc:     Pointer to gpio_chip device structure.
+ * @gpio:   GPIO signal number.
+ *
+ * This function reads the specified signal of the GPIO device.
+ *
+ * Return:
+ * 0 if direction of GPIO signals is set as input otherwise it
+ * returns negative error value.
+ */
+static int xgpio_get(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct xgpio_instance *chip = gpiochip_get_data(gc);
+	u32 val;
+
+	val = xgpio_readreg(chip->regs + XGPIO_DATA_OFFSET +
+			    xgpio_regoffset(chip, gpio));
+
+	return !!(val & BIT(xgpio_offset(chip, gpio)));
+}
+
+/**
+ * xgpio_set - Write the specified signal of the GPIO device.
+ * @gc:     Pointer to gpio_chip device structure.
+ * @gpio:   GPIO signal number.
+ * @val:    Value to be written to specified signal.
+ *
+ * This function writes the specified value in to the specified signal of the
+ * GPIO device.
+ */
+static void xgpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+	unsigned long flags;
+	struct xgpio_instance *chip = gpiochip_get_data(gc);
+	int index =  xgpio_index(chip, gpio);
+	int offset =  xgpio_offset(chip, gpio);
+
+	spin_lock_irqsave(&chip->gpio_lock[index], flags);
+
+	/* Write to GPIO signal and set its direction to output */
+	if (val)
+		chip->gpio_state[index] |= BIT(offset);
+	else
+		chip->gpio_state[index] &= ~BIT(offset);
+
+	xgpio_writereg(chip->regs + XGPIO_DATA_OFFSET +
+		       xgpio_regoffset(chip, gpio), chip->gpio_state[index]);
+
+	spin_unlock_irqrestore(&chip->gpio_lock[index], flags);
+}
+
+/**
+ * xgpio_set_multiple - Write the specified signals of the GPIO device.
+ * @gc:     Pointer to gpio_chip device structure.
+ * @mask:   Mask of the GPIOS to modify.
+ * @bits:   Value to be wrote on each GPIO
+ *
+ * This function writes the specified values into the specified signals of the
+ * GPIO devices.
+ */
+static void xgpio_set_multiple(struct gpio_chip *gc, unsigned long *mask,
+			       unsigned long *bits)
+{
+	unsigned long flags;
+	struct xgpio_instance *chip = gpiochip_get_data(gc);
+	int index = xgpio_index(chip, 0);
+	int offset, i;
+
+	spin_lock_irqsave(&chip->gpio_lock[index], flags);
+
+	/* Write to GPIO signals */
+	for (i = 0; i < gc->ngpio; i++) {
+		if (*mask == 0)
+			break;
+		/* Once finished with an index write it out to the register */
+		if (index !=  xgpio_index(chip, i)) {
+			xgpio_writereg(chip->regs + XGPIO_DATA_OFFSET +
+				       index * XGPIO_CHANNEL_OFFSET,
+				       chip->gpio_state[index]);
+			spin_unlock_irqrestore(&chip->gpio_lock[index], flags);
+			index =  xgpio_index(chip, i);
+			spin_lock_irqsave(&chip->gpio_lock[index], flags);
+		}
+		if (__test_and_clear_bit(i, mask)) {
+			offset =  xgpio_offset(chip, i);
+			if (test_bit(i, bits))
+				chip->gpio_state[index] |= BIT(offset);
+			else
+				chip->gpio_state[index] &= ~BIT(offset);
+		}
+	}
+
+	xgpio_writereg(chip->regs + XGPIO_DATA_OFFSET +
+		       index * XGPIO_CHANNEL_OFFSET, chip->gpio_state[index]);
+
+	spin_unlock_irqrestore(&chip->gpio_lock[index], flags);
+}
+
+/**
+ * xgpio_dir_in - Set the direction of the specified GPIO signal as input.
+ * @gc:     Pointer to gpio_chip device structure.
+ * @gpio:   GPIO signal number.
+ *
+ * Return:
+ * 0 - if direction of GPIO signals is set as input
+ * otherwise it returns negative error value.
+ */
+static int xgpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+	unsigned long flags;
+	struct xgpio_instance *chip = gpiochip_get_data(gc);
+	int index =  xgpio_index(chip, gpio);
+	int offset =  xgpio_offset(chip, gpio);
+
+	spin_lock_irqsave(&chip->gpio_lock[index], flags);
+
+	/* Set the GPIO bit in shadow register and set direction as input */
+	chip->gpio_dir[index] |= BIT(offset);
+	xgpio_writereg(chip->regs + XGPIO_TRI_OFFSET +
+		       xgpio_regoffset(chip, gpio), chip->gpio_dir[index]);
+
+	spin_unlock_irqrestore(&chip->gpio_lock[index], flags);
+
+	return 0;
+}
+
+/**
+ * xgpio_dir_out - Set the direction of the specified GPIO signal as output.
+ * @gc:     Pointer to gpio_chip device structure.
+ * @gpio:   GPIO signal number.
+ * @val:    Value to be written to specified signal.
+ *
+ * This function sets the direction of specified GPIO signal as output.
+ *
+ * Return:
+ * If all GPIO signals of GPIO chip is configured as input then it returns
+ * error otherwise it returns 0.
+ */
+static int xgpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+	unsigned long flags;
+	struct xgpio_instance *chip = gpiochip_get_data(gc);
+	int index =  xgpio_index(chip, gpio);
+	int offset =  xgpio_offset(chip, gpio);
+
+	spin_lock_irqsave(&chip->gpio_lock[index], flags);
+
+	/* Write state of GPIO signal */
+	if (val)
+		chip->gpio_state[index] |= BIT(offset);
+	else
+		chip->gpio_state[index] &= ~BIT(offset);
+	xgpio_writereg(chip->regs + XGPIO_DATA_OFFSET +
+			xgpio_regoffset(chip, gpio), chip->gpio_state[index]);
+
+	/* Clear the GPIO bit in shadow register and set direction as output */
+	chip->gpio_dir[index] &= ~BIT(offset);
+	xgpio_writereg(chip->regs + XGPIO_TRI_OFFSET +
+			xgpio_regoffset(chip, gpio), chip->gpio_dir[index]);
+
+	spin_unlock_irqrestore(&chip->gpio_lock[index], flags);
+
+	return 0;
+}
+
+/**
+ * xgpio_save_regs - Set initial values of GPIO pins
+ * @chip: Pointer to GPIO instance
+ */
+static void xgpio_save_regs(struct xgpio_instance *chip)
+{
+	xgpio_writereg(chip->regs + XGPIO_DATA_OFFSET,	chip->gpio_state[0]);
+	xgpio_writereg(chip->regs + XGPIO_TRI_OFFSET, chip->gpio_dir[0]);
+
+	if (!chip->gpio_width[1])
+		return;
+
+	xgpio_writereg(chip->regs + XGPIO_DATA_OFFSET + XGPIO_CHANNEL_OFFSET,
+		       chip->gpio_state[1]);
+	xgpio_writereg(chip->regs + XGPIO_TRI_OFFSET + XGPIO_CHANNEL_OFFSET,
+		       chip->gpio_dir[1]);
+}
+
+/**
+ * xgpio_of_probe - Probe method for the GPIO device.
+ * @pdev: pointer to the platform device
+ *
+ * Return:
+ * It returns 0, if the driver is bound to the GPIO device, or
+ * a negative value if there is an error.
+ */
+static int xgpio_probe(struct platform_device *pdev)
+{
+	struct xgpio_instance *chip;
+	int status = 0;
+	struct device_node *np = pdev->dev.of_node;
+	u32 is_dual;
+
+	chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, chip);
+
+	/* Update GPIO state shadow register with default value */
+	of_property_read_u32(np, "xlnx,dout-default", &chip->gpio_state[0]);
+
+	/* Update GPIO direction shadow register with default value */
+	if (of_property_read_u32(np, "xlnx,tri-default", &chip->gpio_dir[0]))
+		chip->gpio_dir[0] = 0xFFFFFFFF;
+
+	/*
+	 * Check device node and parent device node for device width
+	 * and assume default width of 32
+	 */
+	if (of_property_read_u32(np, "xlnx,gpio-width", &chip->gpio_width[0]))
+		chip->gpio_width[0] = 32;
+
+	spin_lock_init(&chip->gpio_lock[0]);
+
+	if (of_property_read_u32(np, "xlnx,is-dual", &is_dual))
+		is_dual = 0;
+
+	if (is_dual) {
+		/* Update GPIO state shadow register with default value */
+		of_property_read_u32(np, "xlnx,dout-default-2",
+				     &chip->gpio_state[1]);
+
+		/* Update GPIO direction shadow register with default value */
+		if (of_property_read_u32(np, "xlnx,tri-default-2",
+					 &chip->gpio_dir[1]))
+			chip->gpio_dir[1] = 0xFFFFFFFF;
+
+		/*
+		 * Check device node and parent device node for device width
+		 * and assume default width of 32
+		 */
+		if (of_property_read_u32(np, "xlnx,gpio2-width",
+					 &chip->gpio_width[1]))
+			chip->gpio_width[1] = 32;
+
+		spin_lock_init(&chip->gpio_lock[1]);
+	}
+
+	chip->gc.base = -1;
+	chip->gc.ngpio = chip->gpio_width[0] + chip->gpio_width[1];
+	chip->gc.parent = &pdev->dev;
+	chip->gc.direction_input = xgpio_dir_in;
+	chip->gc.direction_output = xgpio_dir_out;
+	chip->gc.get = xgpio_get;
+	chip->gc.set = xgpio_set;
+	chip->gc.set_multiple = xgpio_set_multiple;
+
+	chip->gc.label = dev_name(&pdev->dev);
+
+	chip->regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(chip->regs)) {
+		dev_err(&pdev->dev, "failed to ioremap memory resource\n");
+		return PTR_ERR(chip->regs);
+	}
+
+	xgpio_save_regs(chip);
+
+	status = devm_gpiochip_add_data(&pdev->dev, &chip->gc, chip);
+	if (status) {
+		dev_err(&pdev->dev, "failed to add GPIO chip\n");
+		return status;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id xgpio_of_match[] = {
+	{ .compatible = "xlnx,xps-gpio-1.00.a", },
+	{ /* end of list */ },
+};
+
+MODULE_DEVICE_TABLE(of, xgpio_of_match);
+
+static struct platform_driver xgpio_plat_driver = {
+	.probe		= xgpio_probe,
+	.driver		= {
+			.name = "gpio-xilinx",
+			.of_match_table	= xgpio_of_match,
+	},
+};
+
+static int __init xgpio_init(void)
+{
+	return platform_driver_register(&xgpio_plat_driver);
+}
+
+subsys_initcall(xgpio_init);
+
+static void __exit xgpio_exit(void)
+{
+	platform_driver_unregister(&xgpio_plat_driver);
+}
+module_exit(xgpio_exit);
+
+MODULE_AUTHOR("Xilinx, Inc.");
+MODULE_DESCRIPTION("Xilinx GPIO driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/gpio-xlp.c b/drivers/gpio/gpio-xlp.c
new file mode 100644
index 000000000..d7b16bb9e
--- /dev/null
+++ b/drivers/gpio/gpio-xlp.c
@@ -0,0 +1,444 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2003-2015 Broadcom Corporation
+ * All Rights Reserved
+ */
+
+#include <linux/gpio/driver.h>
+#include <linux/platform_device.h>
+#include <linux/of_device.h>
+#include <linux/module.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/acpi.h>
+
+/*
+ * XLP GPIO has multiple 32 bit registers for each feature where each register
+ * controls 32 pins. So, pins up to 64 require 2 32-bit registers and up to 96
+ * require 3 32-bit registers for each feature.
+ * Here we only define offset of the first register for each feature. Offset of
+ * the registers for pins greater than 32 can be calculated as following(Use
+ * GPIO_INT_STAT as example):
+ *
+ * offset = (gpio / XLP_GPIO_REGSZ) * 4;
+ * reg_addr = addr + offset;
+ *
+ * where addr is base address of the that feature register and gpio is the pin.
+ */
+#define GPIO_OUTPUT_EN		0x00
+#define GPIO_PADDRV		0x08
+#define GPIO_INT_EN00		0x18
+#define GPIO_INT_EN10		0x20
+#define GPIO_INT_EN20		0x28
+#define GPIO_INT_EN30		0x30
+#define GPIO_INT_POL		0x38
+#define GPIO_INT_TYPE		0x40
+#define GPIO_INT_STAT		0x48
+
+#define GPIO_9XX_BYTESWAP	0X00
+#define GPIO_9XX_CTRL		0X04
+#define GPIO_9XX_OUTPUT_EN	0x14
+#define GPIO_9XX_PADDRV		0x24
+/*
+ * Only for 4 interrupt enable reg are defined for now,
+ * total reg available are 12.
+ */
+#define GPIO_9XX_INT_EN00	0x44
+#define GPIO_9XX_INT_EN10	0x54
+#define GPIO_9XX_INT_EN20	0x64
+#define GPIO_9XX_INT_EN30	0x74
+#define GPIO_9XX_INT_POL	0x104
+#define GPIO_9XX_INT_TYPE	0x114
+#define GPIO_9XX_INT_STAT	0x124
+
+#define GPIO_3XX_INT_EN00	0x18
+#define GPIO_3XX_INT_EN10	0x20
+#define GPIO_3XX_INT_EN20	0x28
+#define GPIO_3XX_INT_EN30	0x30
+#define GPIO_3XX_INT_POL	0x78
+#define GPIO_3XX_INT_TYPE	0x80
+#define GPIO_3XX_INT_STAT	0x88
+
+/* Interrupt type register mask */
+#define XLP_GPIO_IRQ_TYPE_LVL	0x0
+#define XLP_GPIO_IRQ_TYPE_EDGE	0x1
+
+/* Interrupt polarity register mask */
+#define XLP_GPIO_IRQ_POL_HIGH	0x0
+#define XLP_GPIO_IRQ_POL_LOW	0x1
+
+#define XLP_GPIO_REGSZ		32
+#define XLP_GPIO_IRQ_BASE	768
+#define XLP_MAX_NR_GPIO		96
+
+/* XLP variants supported by this driver */
+enum {
+	XLP_GPIO_VARIANT_XLP832 = 1,
+	XLP_GPIO_VARIANT_XLP316,
+	XLP_GPIO_VARIANT_XLP208,
+	XLP_GPIO_VARIANT_XLP980,
+	XLP_GPIO_VARIANT_XLP532,
+	GPIO_VARIANT_VULCAN
+};
+
+struct xlp_gpio_priv {
+	struct gpio_chip chip;
+	DECLARE_BITMAP(gpio_enabled_mask, XLP_MAX_NR_GPIO);
+	void __iomem *gpio_intr_en;	/* pointer to first intr enable reg */
+	void __iomem *gpio_intr_stat;	/* pointer to first intr status reg */
+	void __iomem *gpio_intr_type;	/* pointer to first intr type reg */
+	void __iomem *gpio_intr_pol;	/* pointer to first intr polarity reg */
+	void __iomem *gpio_out_en;	/* pointer to first output enable reg */
+	void __iomem *gpio_paddrv;	/* pointer to first pad drive reg */
+	spinlock_t lock;
+};
+
+static int xlp_gpio_get_reg(void __iomem *addr, unsigned gpio)
+{
+	u32 pos, regset;
+
+	pos = gpio % XLP_GPIO_REGSZ;
+	regset = (gpio / XLP_GPIO_REGSZ) * 4;
+	return !!(readl(addr + regset) & BIT(pos));
+}
+
+static void xlp_gpio_set_reg(void __iomem *addr, unsigned gpio, int state)
+{
+	u32 value, pos, regset;
+
+	pos = gpio % XLP_GPIO_REGSZ;
+	regset = (gpio / XLP_GPIO_REGSZ) * 4;
+	value = readl(addr + regset);
+
+	if (state)
+		value |= BIT(pos);
+	else
+		value &= ~BIT(pos);
+
+	writel(value, addr + regset);
+}
+
+static void xlp_gpio_irq_disable(struct irq_data *d)
+{
+	struct gpio_chip *gc  = irq_data_get_irq_chip_data(d);
+	struct xlp_gpio_priv *priv = gpiochip_get_data(gc);
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	xlp_gpio_set_reg(priv->gpio_intr_en, d->hwirq, 0x0);
+	__clear_bit(d->hwirq, priv->gpio_enabled_mask);
+	spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static void xlp_gpio_irq_mask_ack(struct irq_data *d)
+{
+	struct gpio_chip *gc  = irq_data_get_irq_chip_data(d);
+	struct xlp_gpio_priv *priv = gpiochip_get_data(gc);
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	xlp_gpio_set_reg(priv->gpio_intr_en, d->hwirq, 0x0);
+	xlp_gpio_set_reg(priv->gpio_intr_stat, d->hwirq, 0x1);
+	__clear_bit(d->hwirq, priv->gpio_enabled_mask);
+	spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static void xlp_gpio_irq_unmask(struct irq_data *d)
+{
+	struct gpio_chip *gc  = irq_data_get_irq_chip_data(d);
+	struct xlp_gpio_priv *priv = gpiochip_get_data(gc);
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	xlp_gpio_set_reg(priv->gpio_intr_en, d->hwirq, 0x1);
+	__set_bit(d->hwirq, priv->gpio_enabled_mask);
+	spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static int xlp_gpio_set_irq_type(struct irq_data *d, unsigned int type)
+{
+	struct gpio_chip *gc  = irq_data_get_irq_chip_data(d);
+	struct xlp_gpio_priv *priv = gpiochip_get_data(gc);
+	int pol, irq_type;
+
+	switch (type) {
+	case IRQ_TYPE_EDGE_RISING:
+		irq_type = XLP_GPIO_IRQ_TYPE_EDGE;
+		pol = XLP_GPIO_IRQ_POL_HIGH;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		irq_type = XLP_GPIO_IRQ_TYPE_EDGE;
+		pol = XLP_GPIO_IRQ_POL_LOW;
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		irq_type = XLP_GPIO_IRQ_TYPE_LVL;
+		pol = XLP_GPIO_IRQ_POL_HIGH;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		irq_type = XLP_GPIO_IRQ_TYPE_LVL;
+		pol = XLP_GPIO_IRQ_POL_LOW;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	xlp_gpio_set_reg(priv->gpio_intr_type, d->hwirq, irq_type);
+	xlp_gpio_set_reg(priv->gpio_intr_pol, d->hwirq, pol);
+
+	return 0;
+}
+
+static struct irq_chip xlp_gpio_irq_chip = {
+	.name		= "XLP-GPIO",
+	.irq_mask_ack	= xlp_gpio_irq_mask_ack,
+	.irq_disable	= xlp_gpio_irq_disable,
+	.irq_set_type	= xlp_gpio_set_irq_type,
+	.irq_unmask	= xlp_gpio_irq_unmask,
+	.flags		= IRQCHIP_ONESHOT_SAFE,
+};
+
+static void xlp_gpio_generic_handler(struct irq_desc *desc)
+{
+	struct xlp_gpio_priv *priv = irq_desc_get_handler_data(desc);
+	struct irq_chip *irqchip = irq_desc_get_chip(desc);
+	int gpio, regoff;
+	u32 gpio_stat;
+
+	regoff = -1;
+	gpio_stat = 0;
+
+	chained_irq_enter(irqchip, desc);
+	for_each_set_bit(gpio, priv->gpio_enabled_mask, XLP_MAX_NR_GPIO) {
+		if (regoff != gpio / XLP_GPIO_REGSZ) {
+			regoff = gpio / XLP_GPIO_REGSZ;
+			gpio_stat = readl(priv->gpio_intr_stat + regoff * 4);
+		}
+
+		if (gpio_stat & BIT(gpio % XLP_GPIO_REGSZ))
+			generic_handle_irq(irq_find_mapping(
+						priv->chip.irq.domain, gpio));
+	}
+	chained_irq_exit(irqchip, desc);
+}
+
+static int xlp_gpio_dir_output(struct gpio_chip *gc, unsigned gpio, int state)
+{
+	struct xlp_gpio_priv *priv = gpiochip_get_data(gc);
+
+	BUG_ON(gpio >= gc->ngpio);
+	xlp_gpio_set_reg(priv->gpio_out_en, gpio, 0x1);
+
+	return 0;
+}
+
+static int xlp_gpio_dir_input(struct gpio_chip *gc, unsigned gpio)
+{
+	struct xlp_gpio_priv *priv = gpiochip_get_data(gc);
+
+	BUG_ON(gpio >= gc->ngpio);
+	xlp_gpio_set_reg(priv->gpio_out_en, gpio, 0x0);
+
+	return 0;
+}
+
+static int xlp_gpio_get(struct gpio_chip *gc, unsigned gpio)
+{
+	struct xlp_gpio_priv *priv = gpiochip_get_data(gc);
+
+	BUG_ON(gpio >= gc->ngpio);
+	return xlp_gpio_get_reg(priv->gpio_paddrv, gpio);
+}
+
+static void xlp_gpio_set(struct gpio_chip *gc, unsigned gpio, int state)
+{
+	struct xlp_gpio_priv *priv = gpiochip_get_data(gc);
+
+	BUG_ON(gpio >= gc->ngpio);
+	xlp_gpio_set_reg(priv->gpio_paddrv, gpio, state);
+}
+
+static const struct of_device_id xlp_gpio_of_ids[] = {
+	{
+		.compatible = "netlogic,xlp832-gpio",
+		.data	    = (void *)XLP_GPIO_VARIANT_XLP832,
+	},
+	{
+		.compatible = "netlogic,xlp316-gpio",
+		.data	    = (void *)XLP_GPIO_VARIANT_XLP316,
+	},
+	{
+		.compatible = "netlogic,xlp208-gpio",
+		.data	    = (void *)XLP_GPIO_VARIANT_XLP208,
+	},
+	{
+		.compatible = "netlogic,xlp980-gpio",
+		.data	    = (void *)XLP_GPIO_VARIANT_XLP980,
+	},
+	{
+		.compatible = "netlogic,xlp532-gpio",
+		.data	    = (void *)XLP_GPIO_VARIANT_XLP532,
+	},
+	{
+		.compatible = "brcm,vulcan-gpio",
+		.data	    = (void *)GPIO_VARIANT_VULCAN,
+	},
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, xlp_gpio_of_ids);
+
+static int xlp_gpio_probe(struct platform_device *pdev)
+{
+	struct gpio_chip *gc;
+	struct gpio_irq_chip *girq;
+	struct xlp_gpio_priv *priv;
+	void __iomem *gpio_base;
+	int irq_base, irq, err;
+	int ngpio;
+	u32 soc_type;
+
+	priv = devm_kzalloc(&pdev->dev,	sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	gpio_base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(gpio_base))
+		return PTR_ERR(gpio_base);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	if (pdev->dev.of_node) {
+		soc_type = (uintptr_t)of_device_get_match_data(&pdev->dev);
+	} else {
+		const struct acpi_device_id *acpi_id;
+
+		acpi_id = acpi_match_device(pdev->dev.driver->acpi_match_table,
+						&pdev->dev);
+		if (!acpi_id || !acpi_id->driver_data) {
+			dev_err(&pdev->dev, "Unable to match ACPI ID\n");
+			return -ENODEV;
+		}
+		soc_type = (uintptr_t) acpi_id->driver_data;
+	}
+
+	switch (soc_type) {
+	case XLP_GPIO_VARIANT_XLP832:
+		priv->gpio_out_en = gpio_base + GPIO_OUTPUT_EN;
+		priv->gpio_paddrv = gpio_base + GPIO_PADDRV;
+		priv->gpio_intr_stat = gpio_base + GPIO_INT_STAT;
+		priv->gpio_intr_type = gpio_base + GPIO_INT_TYPE;
+		priv->gpio_intr_pol = gpio_base + GPIO_INT_POL;
+		priv->gpio_intr_en = gpio_base + GPIO_INT_EN00;
+		ngpio = 41;
+		break;
+	case XLP_GPIO_VARIANT_XLP208:
+	case XLP_GPIO_VARIANT_XLP316:
+		priv->gpio_out_en = gpio_base + GPIO_OUTPUT_EN;
+		priv->gpio_paddrv = gpio_base + GPIO_PADDRV;
+		priv->gpio_intr_stat = gpio_base + GPIO_3XX_INT_STAT;
+		priv->gpio_intr_type = gpio_base + GPIO_3XX_INT_TYPE;
+		priv->gpio_intr_pol = gpio_base + GPIO_3XX_INT_POL;
+		priv->gpio_intr_en = gpio_base + GPIO_3XX_INT_EN00;
+
+		ngpio = (soc_type == XLP_GPIO_VARIANT_XLP208) ? 42 : 57;
+		break;
+	case XLP_GPIO_VARIANT_XLP980:
+	case XLP_GPIO_VARIANT_XLP532:
+	case GPIO_VARIANT_VULCAN:
+		priv->gpio_out_en = gpio_base + GPIO_9XX_OUTPUT_EN;
+		priv->gpio_paddrv = gpio_base + GPIO_9XX_PADDRV;
+		priv->gpio_intr_stat = gpio_base + GPIO_9XX_INT_STAT;
+		priv->gpio_intr_type = gpio_base + GPIO_9XX_INT_TYPE;
+		priv->gpio_intr_pol = gpio_base + GPIO_9XX_INT_POL;
+		priv->gpio_intr_en = gpio_base + GPIO_9XX_INT_EN00;
+
+		if (soc_type == XLP_GPIO_VARIANT_XLP980)
+			ngpio = 66;
+		else if (soc_type == XLP_GPIO_VARIANT_XLP532)
+			ngpio = 67;
+		else
+			ngpio = 70;
+		break;
+	default:
+		dev_err(&pdev->dev, "Unknown Processor type!\n");
+		return -ENODEV;
+	}
+
+	bitmap_zero(priv->gpio_enabled_mask, XLP_MAX_NR_GPIO);
+
+	gc = &priv->chip;
+
+	gc->owner = THIS_MODULE;
+	gc->label = dev_name(&pdev->dev);
+	gc->base = 0;
+	gc->parent = &pdev->dev;
+	gc->ngpio = ngpio;
+	gc->of_node = pdev->dev.of_node;
+	gc->direction_output = xlp_gpio_dir_output;
+	gc->direction_input = xlp_gpio_dir_input;
+	gc->set = xlp_gpio_set;
+	gc->get = xlp_gpio_get;
+
+	spin_lock_init(&priv->lock);
+
+	/* XLP(MIPS) has fixed range for GPIO IRQs, Vulcan(ARM64) does not */
+	if (soc_type != GPIO_VARIANT_VULCAN) {
+		irq_base = devm_irq_alloc_descs(&pdev->dev, -1,
+						XLP_GPIO_IRQ_BASE,
+						gc->ngpio, 0);
+		if (irq_base < 0) {
+			dev_err(&pdev->dev, "Failed to allocate IRQ numbers\n");
+			return irq_base;
+		}
+	} else {
+		irq_base = 0;
+	}
+
+	girq = &gc->irq;
+	girq->chip = &xlp_gpio_irq_chip;
+	girq->parent_handler = xlp_gpio_generic_handler;
+	girq->num_parents = 1;
+	girq->parents = devm_kcalloc(&pdev->dev, 1,
+				     sizeof(*girq->parents),
+				     GFP_KERNEL);
+	if (!girq->parents)
+		return -ENOMEM;
+	girq->parents[0] = irq;
+	girq->first = irq_base;
+	girq->default_type = IRQ_TYPE_NONE;
+	girq->handler = handle_level_irq;
+
+	err = gpiochip_add_data(gc, priv);
+	if (err < 0)
+		return err;
+
+	dev_info(&pdev->dev, "registered %d GPIOs\n", gc->ngpio);
+
+	return 0;
+}
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id xlp_gpio_acpi_match[] = {
+	{ "BRCM9006", GPIO_VARIANT_VULCAN },
+	{ "CAV9006",  GPIO_VARIANT_VULCAN },
+	{},
+};
+MODULE_DEVICE_TABLE(acpi, xlp_gpio_acpi_match);
+#endif
+
+static struct platform_driver xlp_gpio_driver = {
+	.driver		= {
+		.name	= "xlp-gpio",
+		.of_match_table = xlp_gpio_of_ids,
+		.acpi_match_table = ACPI_PTR(xlp_gpio_acpi_match),
+	},
+	.probe		= xlp_gpio_probe,
+};
+module_platform_driver(xlp_gpio_driver);
+
+MODULE_AUTHOR("Kamlakant Patel <kamlakant.patel@broadcom.com>");
+MODULE_AUTHOR("Ganesan Ramalingam <ganesanr@broadcom.com>");
+MODULE_DESCRIPTION("Netlogic XLP GPIO Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-xra1403.c b/drivers/gpio/gpio-xra1403.c
new file mode 100644
index 000000000..e2cac1209
--- /dev/null
+++ b/drivers/gpio/gpio-xra1403.c
@@ -0,0 +1,226 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * GPIO driver for EXAR XRA1403 16-bit GPIO expander
+ *
+ * Copyright (c) 2017, General Electric Company
+ */
+
+#include <linux/bitops.h>
+#include <linux/gpio/driver.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/seq_file.h>
+#include <linux/spi/spi.h>
+#include <linux/regmap.h>
+
+/* XRA1403 registers */
+#define XRA_GSR   0x00 /* GPIO State */
+#define XRA_OCR   0x02 /* Output Control */
+#define XRA_PIR   0x04 /* Input Polarity Inversion */
+#define XRA_GCR   0x06 /* GPIO Configuration */
+#define XRA_PUR   0x08 /* Input Internal Pull-up Resistor Enable/Disable */
+#define XRA_IER   0x0A /* Input Interrupt Enable */
+#define XRA_TSCR  0x0C /* Output Three-State Control */
+#define XRA_ISR   0x0E /* Input Interrupt Status */
+#define XRA_REIR  0x10 /* Input Rising Edge Interrupt Enable */
+#define XRA_FEIR  0x12 /* Input Falling Edge Interrupt Enable */
+#define XRA_IFR   0x14 /* Input Filter Enable/Disable */
+#define XRA_LAST  0x15 /* Bounds */
+
+struct xra1403 {
+	struct gpio_chip  chip;
+	struct regmap     *regmap;
+};
+
+static const struct regmap_config xra1403_regmap_cfg = {
+		.reg_bits = 7,
+		.pad_bits = 1,
+		.val_bits = 8,
+
+		.max_register = XRA_LAST,
+};
+
+static unsigned int to_reg(unsigned int reg, unsigned int offset)
+{
+	return reg + (offset > 7);
+}
+
+static int xra1403_direction_input(struct gpio_chip *chip, unsigned int offset)
+{
+	struct xra1403 *xra = gpiochip_get_data(chip);
+
+	return regmap_update_bits(xra->regmap, to_reg(XRA_GCR, offset),
+			BIT(offset % 8), BIT(offset % 8));
+}
+
+static int xra1403_direction_output(struct gpio_chip *chip, unsigned int offset,
+				    int value)
+{
+	int ret;
+	struct xra1403 *xra = gpiochip_get_data(chip);
+
+	ret = regmap_update_bits(xra->regmap, to_reg(XRA_GCR, offset),
+			BIT(offset % 8), 0);
+	if (ret)
+		return ret;
+
+	ret = regmap_update_bits(xra->regmap, to_reg(XRA_OCR, offset),
+			BIT(offset % 8), value ? BIT(offset % 8) : 0);
+
+	return ret;
+}
+
+static int xra1403_get_direction(struct gpio_chip *chip, unsigned int offset)
+{
+	int ret;
+	unsigned int val;
+	struct xra1403 *xra = gpiochip_get_data(chip);
+
+	ret = regmap_read(xra->regmap, to_reg(XRA_GCR, offset), &val);
+	if (ret)
+		return ret;
+
+	if (val & BIT(offset % 8))
+		return GPIO_LINE_DIRECTION_IN;
+
+	return GPIO_LINE_DIRECTION_OUT;
+}
+
+static int xra1403_get(struct gpio_chip *chip, unsigned int offset)
+{
+	int ret;
+	unsigned int val;
+	struct xra1403 *xra = gpiochip_get_data(chip);
+
+	ret = regmap_read(xra->regmap, to_reg(XRA_GSR, offset), &val);
+	if (ret)
+		return ret;
+
+	return !!(val & BIT(offset % 8));
+}
+
+static void xra1403_set(struct gpio_chip *chip, unsigned int offset, int value)
+{
+	int ret;
+	struct xra1403 *xra = gpiochip_get_data(chip);
+
+	ret = regmap_update_bits(xra->regmap, to_reg(XRA_OCR, offset),
+			BIT(offset % 8), value ? BIT(offset % 8) : 0);
+	if (ret)
+		dev_err(chip->parent, "Failed to set pin: %d, ret: %d\n",
+				offset, ret);
+}
+
+#ifdef CONFIG_DEBUG_FS
+static void xra1403_dbg_show(struct seq_file *s, struct gpio_chip *chip)
+{
+	int reg;
+	struct xra1403 *xra = gpiochip_get_data(chip);
+	int value[XRA_LAST];
+	int i;
+	const char *label;
+	unsigned int gcr;
+	unsigned int gsr;
+
+	seq_puts(s, "xra reg:");
+	for (reg = 0; reg <= XRA_LAST; reg++)
+		seq_printf(s, " %2.2x", reg);
+	seq_puts(s, "\n  value:");
+	for (reg = 0; reg < XRA_LAST; reg++) {
+		regmap_read(xra->regmap, reg, &value[reg]);
+		seq_printf(s, " %2.2x", value[reg]);
+	}
+	seq_puts(s, "\n");
+
+	gcr = value[XRA_GCR + 1] << 8 | value[XRA_GCR];
+	gsr = value[XRA_GSR + 1] << 8 | value[XRA_GSR];
+	for_each_requested_gpio(chip, i, label) {
+		seq_printf(s, " gpio-%-3d (%-12s) %s %s\n",
+			   chip->base + i, label,
+			   (gcr & BIT(i)) ? "in" : "out",
+			   (gsr & BIT(i)) ? "hi" : "lo");
+	}
+}
+#else
+#define xra1403_dbg_show NULL
+#endif
+
+static int xra1403_probe(struct spi_device *spi)
+{
+	struct xra1403 *xra;
+	struct gpio_desc *reset_gpio;
+	int ret;
+
+	xra = devm_kzalloc(&spi->dev, sizeof(*xra), GFP_KERNEL);
+	if (!xra)
+		return -ENOMEM;
+
+	/* bring the chip out of reset if reset pin is provided*/
+	reset_gpio = devm_gpiod_get_optional(&spi->dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(reset_gpio))
+		dev_warn(&spi->dev, "Could not get reset-gpios\n");
+
+	xra->chip.direction_input = xra1403_direction_input;
+	xra->chip.direction_output = xra1403_direction_output;
+	xra->chip.get_direction = xra1403_get_direction;
+	xra->chip.get = xra1403_get;
+	xra->chip.set = xra1403_set;
+
+	xra->chip.dbg_show = xra1403_dbg_show;
+
+	xra->chip.ngpio = 16;
+	xra->chip.label = "xra1403";
+
+	xra->chip.base = -1;
+	xra->chip.can_sleep = true;
+	xra->chip.parent = &spi->dev;
+	xra->chip.owner = THIS_MODULE;
+
+	xra->regmap = devm_regmap_init_spi(spi, &xra1403_regmap_cfg);
+	if (IS_ERR(xra->regmap)) {
+		ret = PTR_ERR(xra->regmap);
+		dev_err(&spi->dev, "Failed to allocate regmap: %d\n", ret);
+		return ret;
+	}
+
+	ret = devm_gpiochip_add_data(&spi->dev, &xra->chip, xra);
+	if (ret < 0) {
+		dev_err(&spi->dev, "Unable to register gpiochip\n");
+		return ret;
+	}
+
+	spi_set_drvdata(spi, xra);
+
+	return 0;
+}
+
+static const struct spi_device_id xra1403_ids[] = {
+	{ "xra1403" },
+	{},
+};
+MODULE_DEVICE_TABLE(spi, xra1403_ids);
+
+static const struct of_device_id xra1403_spi_of_match[] = {
+	{ .compatible = "exar,xra1403" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, xra1403_spi_of_match);
+
+static struct spi_driver xra1403_driver = {
+	.probe    = xra1403_probe,
+	.id_table = xra1403_ids,
+	.driver   = {
+		.name           = "xra1403",
+		.of_match_table = of_match_ptr(xra1403_spi_of_match),
+	},
+};
+
+module_spi_driver(xra1403_driver);
+
+MODULE_AUTHOR("Nandor Han <nandor.han@ge.com>");
+MODULE_AUTHOR("Semi Malinen <semi.malinen@ge.com>");
+MODULE_DESCRIPTION("GPIO expander driver for EXAR XRA1403");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-xtensa.c b/drivers/gpio/gpio-xtensa.c
new file mode 100644
index 000000000..c8af34a63
--- /dev/null
+++ b/drivers/gpio/gpio-xtensa.c
@@ -0,0 +1,174 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2013 TangoTec Ltd.
+ * Author: Baruch Siach <baruch@tkos.co.il>
+ *
+ * Driver for the Xtensa LX4 GPIO32 Option
+ *
+ * Documentation: Xtensa LX4 Microprocessor Data Book, Section 2.22
+ *
+ * GPIO32 is a standard optional extension to the Xtensa architecture core that
+ * provides preconfigured output and input ports for intra SoC signaling. The
+ * GPIO32 option is implemented as 32bit Tensilica Instruction Extension (TIE)
+ * output state called EXPSTATE, and 32bit input wire called IMPWIRE. This
+ * driver treats input and output states as two distinct devices.
+ *
+ * Access to GPIO32 specific instructions is controlled by the CPENABLE
+ * (Coprocessor Enable Bits) register. By default Xtensa Linux startup code
+ * disables access to all coprocessors. This driver sets the CPENABLE bit
+ * corresponding to GPIO32 before any GPIO32 specific instruction, and restores
+ * CPENABLE state after that.
+ *
+ * This driver is currently incompatible with SMP. The GPIO32 extension is not
+ * guaranteed to be available in all cores. Moreover, each core controls a
+ * different set of IO wires. A theoretical SMP aware version of this driver
+ * would need to have a per core workqueue to do the actual GPIO manipulation.
+ */
+
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/gpio/driver.h>
+#include <linux/bitops.h>
+#include <linux/platform_device.h>
+
+#include <asm/coprocessor.h> /* CPENABLE read/write macros */
+
+#ifndef XCHAL_CP_ID_XTIOP
+#error GPIO32 option is not enabled for your xtensa core variant
+#endif
+
+#if XCHAL_HAVE_CP
+
+static inline unsigned long enable_cp(unsigned long *cpenable)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	*cpenable = xtensa_get_sr(cpenable);
+	xtensa_set_sr(*cpenable | BIT(XCHAL_CP_ID_XTIOP), cpenable);
+	return flags;
+}
+
+static inline void disable_cp(unsigned long flags, unsigned long cpenable)
+{
+	xtensa_set_sr(cpenable, cpenable);
+	local_irq_restore(flags);
+}
+
+#else
+
+static inline unsigned long enable_cp(unsigned long *cpenable)
+{
+	*cpenable = 0; /* avoid uninitialized value warning */
+	return 0;
+}
+
+static inline void disable_cp(unsigned long flags, unsigned long cpenable)
+{
+}
+
+#endif /* XCHAL_HAVE_CP */
+
+static int xtensa_impwire_get_direction(struct gpio_chip *gc, unsigned offset)
+{
+	return GPIO_LINE_DIRECTION_IN; /* input only */
+}
+
+static int xtensa_impwire_get_value(struct gpio_chip *gc, unsigned offset)
+{
+	unsigned long flags, saved_cpenable;
+	u32 impwire;
+
+	flags = enable_cp(&saved_cpenable);
+	__asm__ __volatile__("read_impwire %0" : "=a" (impwire));
+	disable_cp(flags, saved_cpenable);
+
+	return !!(impwire & BIT(offset));
+}
+
+static void xtensa_impwire_set_value(struct gpio_chip *gc, unsigned offset,
+				    int value)
+{
+	BUG(); /* output only; should never be called */
+}
+
+static int xtensa_expstate_get_direction(struct gpio_chip *gc, unsigned offset)
+{
+	return GPIO_LINE_DIRECTION_OUT; /* output only */
+}
+
+static int xtensa_expstate_get_value(struct gpio_chip *gc, unsigned offset)
+{
+	unsigned long flags, saved_cpenable;
+	u32 expstate;
+
+	flags = enable_cp(&saved_cpenable);
+	__asm__ __volatile__("rur.expstate %0" : "=a" (expstate));
+	disable_cp(flags, saved_cpenable);
+
+	return !!(expstate & BIT(offset));
+}
+
+static void xtensa_expstate_set_value(struct gpio_chip *gc, unsigned offset,
+				     int value)
+{
+	unsigned long flags, saved_cpenable;
+	u32 mask = BIT(offset);
+	u32 val = value ? BIT(offset) : 0;
+
+	flags = enable_cp(&saved_cpenable);
+	__asm__ __volatile__("wrmsk_expstate %0, %1"
+			     :: "a" (val), "a" (mask));
+	disable_cp(flags, saved_cpenable);
+}
+
+static struct gpio_chip impwire_chip = {
+	.label		= "impwire",
+	.base		= -1,
+	.ngpio		= 32,
+	.get_direction	= xtensa_impwire_get_direction,
+	.get		= xtensa_impwire_get_value,
+	.set		= xtensa_impwire_set_value,
+};
+
+static struct gpio_chip expstate_chip = {
+	.label		= "expstate",
+	.base		= -1,
+	.ngpio		= 32,
+	.get_direction	= xtensa_expstate_get_direction,
+	.get		= xtensa_expstate_get_value,
+	.set		= xtensa_expstate_set_value,
+};
+
+static int xtensa_gpio_probe(struct platform_device *pdev)
+{
+	int ret;
+
+	ret = gpiochip_add_data(&impwire_chip, NULL);
+	if (ret)
+		return ret;
+	return gpiochip_add_data(&expstate_chip, NULL);
+}
+
+static struct platform_driver xtensa_gpio_driver = {
+	.driver		= {
+		.name		= "xtensa-gpio",
+	},
+	.probe		= xtensa_gpio_probe,
+};
+
+static int __init xtensa_gpio_init(void)
+{
+	struct platform_device *pdev;
+
+	pdev = platform_device_register_simple("xtensa-gpio", 0, NULL, 0);
+	if (IS_ERR(pdev))
+		return PTR_ERR(pdev);
+
+	return platform_driver_register(&xtensa_gpio_driver);
+}
+device_initcall(xtensa_gpio_init);
+
+MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>");
+MODULE_DESCRIPTION("Xtensa LX4 GPIO32 driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/gpio-zevio.c b/drivers/gpio/gpio-zevio.c
new file mode 100644
index 000000000..f6f8a5413
--- /dev/null
+++ b/drivers/gpio/gpio-zevio.c
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * GPIO controller in LSI ZEVIO SoCs.
+ *
+ * Author: Fabian Vogt <fabian@ritter-vogt.de>
+ */
+
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/io.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/slab.h>
+#include <linux/gpio/driver.h>
+
+/*
+ * Memory layout:
+ * This chip has four gpio sections, each controls 8 GPIOs.
+ * Bit 0 in section 0 is GPIO 0, bit 2 in section 1 is GPIO 10.
+ * Disclaimer: Reverse engineered!
+ * For more information refer to:
+ * http://hackspire.unsads.com/wiki/index.php/Memory-mapped_I/O_ports#90000000_-_General_Purpose_I.2FO_.28GPIO.29
+ *
+ * 0x00-0x3F: Section 0
+ *     +0x00: Masked interrupt status (read-only)
+ *     +0x04: R: Interrupt status W: Reset interrupt status
+ *     +0x08: R: Interrupt mask W: Mask interrupt
+ *     +0x0C: W: Unmask interrupt (write-only)
+ *     +0x10: Direction: I/O=1/0
+ *     +0x14: Output
+ *     +0x18: Input (read-only)
+ *     +0x20: R: Level interrupt W: Set as level interrupt
+ * 0x40-0x7F: Section 1
+ * 0x80-0xBF: Section 2
+ * 0xC0-0xFF: Section 3
+ */
+
+#define ZEVIO_GPIO_SECTION_SIZE			0x40
+
+/* Offsets to various registers */
+#define ZEVIO_GPIO_INT_MASKED_STATUS	0x00
+#define ZEVIO_GPIO_INT_STATUS		0x04
+#define ZEVIO_GPIO_INT_UNMASK		0x08
+#define ZEVIO_GPIO_INT_MASK		0x0C
+#define ZEVIO_GPIO_DIRECTION		0x10
+#define ZEVIO_GPIO_OUTPUT		0x14
+#define ZEVIO_GPIO_INPUT			0x18
+#define ZEVIO_GPIO_INT_STICKY		0x20
+
+/* Bit number of GPIO in its section */
+#define ZEVIO_GPIO_BIT(gpio) (gpio&7)
+
+struct zevio_gpio {
+	spinlock_t		lock;
+	struct of_mm_gpio_chip	chip;
+};
+
+static inline u32 zevio_gpio_port_get(struct zevio_gpio *c, unsigned pin,
+					unsigned port_offset)
+{
+	unsigned section_offset = ((pin >> 3) & 3)*ZEVIO_GPIO_SECTION_SIZE;
+	return readl(IOMEM(c->chip.regs + section_offset + port_offset));
+}
+
+static inline void zevio_gpio_port_set(struct zevio_gpio *c, unsigned pin,
+					unsigned port_offset, u32 val)
+{
+	unsigned section_offset = ((pin >> 3) & 3)*ZEVIO_GPIO_SECTION_SIZE;
+	writel(val, IOMEM(c->chip.regs + section_offset + port_offset));
+}
+
+/* Functions for struct gpio_chip */
+static int zevio_gpio_get(struct gpio_chip *chip, unsigned pin)
+{
+	struct zevio_gpio *controller = gpiochip_get_data(chip);
+	u32 val, dir;
+
+	spin_lock(&controller->lock);
+	dir = zevio_gpio_port_get(controller, pin, ZEVIO_GPIO_DIRECTION);
+	if (dir & BIT(ZEVIO_GPIO_BIT(pin)))
+		val = zevio_gpio_port_get(controller, pin, ZEVIO_GPIO_INPUT);
+	else
+		val = zevio_gpio_port_get(controller, pin, ZEVIO_GPIO_OUTPUT);
+	spin_unlock(&controller->lock);
+
+	return (val >> ZEVIO_GPIO_BIT(pin)) & 0x1;
+}
+
+static void zevio_gpio_set(struct gpio_chip *chip, unsigned pin, int value)
+{
+	struct zevio_gpio *controller = gpiochip_get_data(chip);
+	u32 val;
+
+	spin_lock(&controller->lock);
+	val = zevio_gpio_port_get(controller, pin, ZEVIO_GPIO_OUTPUT);
+	if (value)
+		val |= BIT(ZEVIO_GPIO_BIT(pin));
+	else
+		val &= ~BIT(ZEVIO_GPIO_BIT(pin));
+
+	zevio_gpio_port_set(controller, pin, ZEVIO_GPIO_OUTPUT, val);
+	spin_unlock(&controller->lock);
+}
+
+static int zevio_gpio_direction_input(struct gpio_chip *chip, unsigned pin)
+{
+	struct zevio_gpio *controller = gpiochip_get_data(chip);
+	u32 val;
+
+	spin_lock(&controller->lock);
+
+	val = zevio_gpio_port_get(controller, pin, ZEVIO_GPIO_DIRECTION);
+	val |= BIT(ZEVIO_GPIO_BIT(pin));
+	zevio_gpio_port_set(controller, pin, ZEVIO_GPIO_DIRECTION, val);
+
+	spin_unlock(&controller->lock);
+
+	return 0;
+}
+
+static int zevio_gpio_direction_output(struct gpio_chip *chip,
+				       unsigned pin, int value)
+{
+	struct zevio_gpio *controller = gpiochip_get_data(chip);
+	u32 val;
+
+	spin_lock(&controller->lock);
+	val = zevio_gpio_port_get(controller, pin, ZEVIO_GPIO_OUTPUT);
+	if (value)
+		val |= BIT(ZEVIO_GPIO_BIT(pin));
+	else
+		val &= ~BIT(ZEVIO_GPIO_BIT(pin));
+
+	zevio_gpio_port_set(controller, pin, ZEVIO_GPIO_OUTPUT, val);
+	val = zevio_gpio_port_get(controller, pin, ZEVIO_GPIO_DIRECTION);
+	val &= ~BIT(ZEVIO_GPIO_BIT(pin));
+	zevio_gpio_port_set(controller, pin, ZEVIO_GPIO_DIRECTION, val);
+
+	spin_unlock(&controller->lock);
+
+	return 0;
+}
+
+static int zevio_gpio_to_irq(struct gpio_chip *chip, unsigned pin)
+{
+	/*
+	 * TODO: Implement IRQs.
+	 * Not implemented yet due to weird lockups
+	 */
+
+	return -ENXIO;
+}
+
+static const struct gpio_chip zevio_gpio_chip = {
+	.direction_input	= zevio_gpio_direction_input,
+	.direction_output	= zevio_gpio_direction_output,
+	.set			= zevio_gpio_set,
+	.get			= zevio_gpio_get,
+	.to_irq			= zevio_gpio_to_irq,
+	.base			= 0,
+	.owner			= THIS_MODULE,
+	.ngpio			= 32,
+	.of_gpio_n_cells	= 2,
+};
+
+/* Initialization */
+static int zevio_gpio_probe(struct platform_device *pdev)
+{
+	struct zevio_gpio *controller;
+	int status, i;
+
+	controller = devm_kzalloc(&pdev->dev, sizeof(*controller), GFP_KERNEL);
+	if (!controller)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, controller);
+
+	/* Copy our reference */
+	controller->chip.gc = zevio_gpio_chip;
+	controller->chip.gc.parent = &pdev->dev;
+
+	status = of_mm_gpiochip_add_data(pdev->dev.of_node,
+					 &(controller->chip),
+					 controller);
+	if (status) {
+		dev_err(&pdev->dev, "failed to add gpiochip: %d\n", status);
+		return status;
+	}
+
+	spin_lock_init(&controller->lock);
+
+	/* Disable interrupts, they only cause errors */
+	for (i = 0; i < controller->chip.gc.ngpio; i += 8)
+		zevio_gpio_port_set(controller, i, ZEVIO_GPIO_INT_MASK, 0xFF);
+
+	dev_dbg(controller->chip.gc.parent, "ZEVIO GPIO controller set up!\n");
+
+	return 0;
+}
+
+static const struct of_device_id zevio_gpio_of_match[] = {
+	{ .compatible = "lsi,zevio-gpio", },
+	{ },
+};
+
+static struct platform_driver zevio_gpio_driver = {
+	.driver		= {
+		.name	= "gpio-zevio",
+		.of_match_table = zevio_gpio_of_match,
+		.suppress_bind_attrs = true,
+	},
+	.probe		= zevio_gpio_probe,
+};
+builtin_platform_driver(zevio_gpio_driver);
diff --git a/drivers/gpio/gpio-zx.c b/drivers/gpio/gpio-zx.c
new file mode 100644
index 000000000..64bfb7227
--- /dev/null
+++ b/drivers/gpio/gpio-zx.c
@@ -0,0 +1,289 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * ZTE ZX296702 GPIO driver
+ *
+ * Author: Jun Nie <jun.nie@linaro.org>
+ *
+ * Copyright (C) 2015 Linaro Ltd.
+ */
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/gpio/driver.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#define ZX_GPIO_DIR	0x00
+#define ZX_GPIO_IVE	0x04
+#define ZX_GPIO_IV	0x08
+#define ZX_GPIO_IEP	0x0C
+#define ZX_GPIO_IEN	0x10
+#define ZX_GPIO_DI	0x14
+#define ZX_GPIO_DO1	0x18
+#define ZX_GPIO_DO0	0x1C
+#define ZX_GPIO_DO	0x20
+
+#define ZX_GPIO_IM	0x28
+#define ZX_GPIO_IE	0x2C
+
+#define ZX_GPIO_MIS	0x30
+#define ZX_GPIO_IC	0x34
+
+#define ZX_GPIO_NR	16
+
+struct zx_gpio {
+	raw_spinlock_t		lock;
+
+	void __iomem		*base;
+	struct gpio_chip	gc;
+};
+
+static int zx_direction_input(struct gpio_chip *gc, unsigned offset)
+{
+	struct zx_gpio *chip = gpiochip_get_data(gc);
+	unsigned long flags;
+	u16 gpiodir;
+
+	if (offset >= gc->ngpio)
+		return -EINVAL;
+
+	raw_spin_lock_irqsave(&chip->lock, flags);
+	gpiodir = readw_relaxed(chip->base + ZX_GPIO_DIR);
+	gpiodir &= ~BIT(offset);
+	writew_relaxed(gpiodir, chip->base + ZX_GPIO_DIR);
+	raw_spin_unlock_irqrestore(&chip->lock, flags);
+
+	return 0;
+}
+
+static int zx_direction_output(struct gpio_chip *gc, unsigned offset,
+		int value)
+{
+	struct zx_gpio *chip = gpiochip_get_data(gc);
+	unsigned long flags;
+	u16 gpiodir;
+
+	if (offset >= gc->ngpio)
+		return -EINVAL;
+
+	raw_spin_lock_irqsave(&chip->lock, flags);
+	gpiodir = readw_relaxed(chip->base + ZX_GPIO_DIR);
+	gpiodir |= BIT(offset);
+	writew_relaxed(gpiodir, chip->base + ZX_GPIO_DIR);
+
+	if (value)
+		writew_relaxed(BIT(offset), chip->base + ZX_GPIO_DO1);
+	else
+		writew_relaxed(BIT(offset), chip->base + ZX_GPIO_DO0);
+	raw_spin_unlock_irqrestore(&chip->lock, flags);
+
+	return 0;
+}
+
+static int zx_get_value(struct gpio_chip *gc, unsigned offset)
+{
+	struct zx_gpio *chip = gpiochip_get_data(gc);
+
+	return !!(readw_relaxed(chip->base + ZX_GPIO_DI) & BIT(offset));
+}
+
+static void zx_set_value(struct gpio_chip *gc, unsigned offset, int value)
+{
+	struct zx_gpio *chip = gpiochip_get_data(gc);
+
+	if (value)
+		writew_relaxed(BIT(offset), chip->base + ZX_GPIO_DO1);
+	else
+		writew_relaxed(BIT(offset), chip->base + ZX_GPIO_DO0);
+}
+
+static int zx_irq_type(struct irq_data *d, unsigned trigger)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct zx_gpio *chip = gpiochip_get_data(gc);
+	int offset = irqd_to_hwirq(d);
+	unsigned long flags;
+	u16 gpiois, gpioi_epos, gpioi_eneg, gpioiev;
+	u16 bit = BIT(offset);
+
+	if (offset < 0 || offset >= ZX_GPIO_NR)
+		return -EINVAL;
+
+	raw_spin_lock_irqsave(&chip->lock, flags);
+
+	gpioiev = readw_relaxed(chip->base + ZX_GPIO_IV);
+	gpiois = readw_relaxed(chip->base + ZX_GPIO_IVE);
+	gpioi_epos = readw_relaxed(chip->base + ZX_GPIO_IEP);
+	gpioi_eneg = readw_relaxed(chip->base + ZX_GPIO_IEN);
+
+	if (trigger & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) {
+		gpiois |= bit;
+		if (trigger & IRQ_TYPE_LEVEL_HIGH)
+			gpioiev |= bit;
+		else
+			gpioiev &= ~bit;
+	} else
+		gpiois &= ~bit;
+
+	if ((trigger & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH) {
+		gpioi_epos |= bit;
+		gpioi_eneg |= bit;
+	} else {
+		if (trigger & IRQ_TYPE_EDGE_RISING) {
+			gpioi_epos |= bit;
+			gpioi_eneg &= ~bit;
+		} else if (trigger & IRQ_TYPE_EDGE_FALLING) {
+			gpioi_eneg |= bit;
+			gpioi_epos &= ~bit;
+		}
+	}
+
+	writew_relaxed(gpiois, chip->base + ZX_GPIO_IVE);
+	writew_relaxed(gpioi_epos, chip->base + ZX_GPIO_IEP);
+	writew_relaxed(gpioi_eneg, chip->base + ZX_GPIO_IEN);
+	writew_relaxed(gpioiev, chip->base + ZX_GPIO_IV);
+	raw_spin_unlock_irqrestore(&chip->lock, flags);
+
+	return 0;
+}
+
+static void zx_irq_handler(struct irq_desc *desc)
+{
+	unsigned long pending;
+	int offset;
+	struct gpio_chip *gc = irq_desc_get_handler_data(desc);
+	struct zx_gpio *chip = gpiochip_get_data(gc);
+	struct irq_chip *irqchip = irq_desc_get_chip(desc);
+
+	chained_irq_enter(irqchip, desc);
+
+	pending = readw_relaxed(chip->base + ZX_GPIO_MIS);
+	writew_relaxed(pending, chip->base + ZX_GPIO_IC);
+	if (pending) {
+		for_each_set_bit(offset, &pending, ZX_GPIO_NR)
+			generic_handle_irq(irq_find_mapping(gc->irq.domain,
+							    offset));
+	}
+
+	chained_irq_exit(irqchip, desc);
+}
+
+static void zx_irq_mask(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct zx_gpio *chip = gpiochip_get_data(gc);
+	u16 mask = BIT(irqd_to_hwirq(d) % ZX_GPIO_NR);
+	u16 gpioie;
+
+	raw_spin_lock(&chip->lock);
+	gpioie = readw_relaxed(chip->base + ZX_GPIO_IM) | mask;
+	writew_relaxed(gpioie, chip->base + ZX_GPIO_IM);
+	gpioie = readw_relaxed(chip->base + ZX_GPIO_IE) & ~mask;
+	writew_relaxed(gpioie, chip->base + ZX_GPIO_IE);
+	raw_spin_unlock(&chip->lock);
+}
+
+static void zx_irq_unmask(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct zx_gpio *chip = gpiochip_get_data(gc);
+	u16 mask = BIT(irqd_to_hwirq(d) % ZX_GPIO_NR);
+	u16 gpioie;
+
+	raw_spin_lock(&chip->lock);
+	gpioie = readw_relaxed(chip->base + ZX_GPIO_IM) & ~mask;
+	writew_relaxed(gpioie, chip->base + ZX_GPIO_IM);
+	gpioie = readw_relaxed(chip->base + ZX_GPIO_IE) | mask;
+	writew_relaxed(gpioie, chip->base + ZX_GPIO_IE);
+	raw_spin_unlock(&chip->lock);
+}
+
+static struct irq_chip zx_irqchip = {
+	.name		= "zx-gpio",
+	.irq_mask	= zx_irq_mask,
+	.irq_unmask	= zx_irq_unmask,
+	.irq_set_type	= zx_irq_type,
+};
+
+static int zx_gpio_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct zx_gpio *chip;
+	struct gpio_irq_chip *girq;
+	int irq, id, ret;
+
+	chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	chip->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(chip->base))
+		return PTR_ERR(chip->base);
+
+	id = of_alias_get_id(dev->of_node, "gpio");
+
+	raw_spin_lock_init(&chip->lock);
+	chip->gc.request = gpiochip_generic_request;
+	chip->gc.free = gpiochip_generic_free;
+	chip->gc.direction_input = zx_direction_input;
+	chip->gc.direction_output = zx_direction_output;
+	chip->gc.get = zx_get_value;
+	chip->gc.set = zx_set_value;
+	chip->gc.base = ZX_GPIO_NR * id;
+	chip->gc.ngpio = ZX_GPIO_NR;
+	chip->gc.label = dev_name(dev);
+	chip->gc.parent = dev;
+	chip->gc.owner = THIS_MODULE;
+
+	/*
+	 * irq_chip support
+	 */
+	writew_relaxed(0xffff, chip->base + ZX_GPIO_IM);
+	writew_relaxed(0, chip->base + ZX_GPIO_IE);
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+	girq = &chip->gc.irq;
+	girq->chip = &zx_irqchip;
+	girq->parent_handler = zx_irq_handler;
+	girq->num_parents = 1;
+	girq->parents = devm_kcalloc(&pdev->dev, 1,
+				     sizeof(*girq->parents),
+				     GFP_KERNEL);
+	if (!girq->parents)
+		return -ENOMEM;
+	girq->parents[0] = irq;
+	girq->default_type = IRQ_TYPE_NONE;
+	girq->handler = handle_simple_irq;
+
+	ret = gpiochip_add_data(&chip->gc, chip);
+	if (ret)
+		return ret;
+
+	platform_set_drvdata(pdev, chip);
+	dev_info(dev, "ZX GPIO chip registered\n");
+
+	return 0;
+}
+
+static const struct of_device_id zx_gpio_match[] = {
+	{
+		.compatible = "zte,zx296702-gpio",
+	},
+	{ },
+};
+
+static struct platform_driver zx_gpio_driver = {
+	.probe		= zx_gpio_probe,
+	.driver = {
+		.name	= "zx_gpio",
+		.of_match_table = of_match_ptr(zx_gpio_match),
+	},
+};
+builtin_platform_driver(zx_gpio_driver)
diff --git a/drivers/gpio/gpio-zynq.c b/drivers/gpio/gpio-zynq.c
new file mode 100644
index 000000000..c288a7502
--- /dev/null
+++ b/drivers/gpio/gpio-zynq.c
@@ -0,0 +1,1055 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Xilinx Zynq GPIO device driver
+ *
+ * Copyright (C) 2009 - 2014 Xilinx, Inc.
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/gpio/driver.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/of.h>
+
+#define DRIVER_NAME "zynq-gpio"
+
+/* Maximum banks */
+#define ZYNQ_GPIO_MAX_BANK	4
+#define ZYNQMP_GPIO_MAX_BANK	6
+#define VERSAL_GPIO_MAX_BANK	4
+#define PMC_GPIO_MAX_BANK	5
+#define VERSAL_UNUSED_BANKS	2
+
+#define ZYNQ_GPIO_BANK0_NGPIO	32
+#define ZYNQ_GPIO_BANK1_NGPIO	22
+#define ZYNQ_GPIO_BANK2_NGPIO	32
+#define ZYNQ_GPIO_BANK3_NGPIO	32
+
+#define ZYNQMP_GPIO_BANK0_NGPIO 26
+#define ZYNQMP_GPIO_BANK1_NGPIO 26
+#define ZYNQMP_GPIO_BANK2_NGPIO 26
+#define ZYNQMP_GPIO_BANK3_NGPIO 32
+#define ZYNQMP_GPIO_BANK4_NGPIO 32
+#define ZYNQMP_GPIO_BANK5_NGPIO 32
+
+#define	ZYNQ_GPIO_NR_GPIOS	118
+#define	ZYNQMP_GPIO_NR_GPIOS	174
+
+#define ZYNQ_GPIO_BANK0_PIN_MIN(str)	0
+#define ZYNQ_GPIO_BANK0_PIN_MAX(str)	(ZYNQ_GPIO_BANK0_PIN_MIN(str) + \
+					ZYNQ##str##_GPIO_BANK0_NGPIO - 1)
+#define ZYNQ_GPIO_BANK1_PIN_MIN(str)	(ZYNQ_GPIO_BANK0_PIN_MAX(str) + 1)
+#define ZYNQ_GPIO_BANK1_PIN_MAX(str)	(ZYNQ_GPIO_BANK1_PIN_MIN(str) + \
+					ZYNQ##str##_GPIO_BANK1_NGPIO - 1)
+#define ZYNQ_GPIO_BANK2_PIN_MIN(str)	(ZYNQ_GPIO_BANK1_PIN_MAX(str) + 1)
+#define ZYNQ_GPIO_BANK2_PIN_MAX(str)	(ZYNQ_GPIO_BANK2_PIN_MIN(str) + \
+					ZYNQ##str##_GPIO_BANK2_NGPIO - 1)
+#define ZYNQ_GPIO_BANK3_PIN_MIN(str)	(ZYNQ_GPIO_BANK2_PIN_MAX(str) + 1)
+#define ZYNQ_GPIO_BANK3_PIN_MAX(str)	(ZYNQ_GPIO_BANK3_PIN_MIN(str) + \
+					ZYNQ##str##_GPIO_BANK3_NGPIO - 1)
+#define ZYNQ_GPIO_BANK4_PIN_MIN(str)	(ZYNQ_GPIO_BANK3_PIN_MAX(str) + 1)
+#define ZYNQ_GPIO_BANK4_PIN_MAX(str)	(ZYNQ_GPIO_BANK4_PIN_MIN(str) + \
+					ZYNQ##str##_GPIO_BANK4_NGPIO - 1)
+#define ZYNQ_GPIO_BANK5_PIN_MIN(str)	(ZYNQ_GPIO_BANK4_PIN_MAX(str) + 1)
+#define ZYNQ_GPIO_BANK5_PIN_MAX(str)	(ZYNQ_GPIO_BANK5_PIN_MIN(str) + \
+					ZYNQ##str##_GPIO_BANK5_NGPIO - 1)
+
+/* Register offsets for the GPIO device */
+/* LSW Mask & Data -WO */
+#define ZYNQ_GPIO_DATA_LSW_OFFSET(BANK)	(0x000 + (8 * BANK))
+/* MSW Mask & Data -WO */
+#define ZYNQ_GPIO_DATA_MSW_OFFSET(BANK)	(0x004 + (8 * BANK))
+/* Data Register-RW */
+#define ZYNQ_GPIO_DATA_OFFSET(BANK)	(0x040 + (4 * BANK))
+#define ZYNQ_GPIO_DATA_RO_OFFSET(BANK)	(0x060 + (4 * BANK))
+/* Direction mode reg-RW */
+#define ZYNQ_GPIO_DIRM_OFFSET(BANK)	(0x204 + (0x40 * BANK))
+/* Output enable reg-RW */
+#define ZYNQ_GPIO_OUTEN_OFFSET(BANK)	(0x208 + (0x40 * BANK))
+/* Interrupt mask reg-RO */
+#define ZYNQ_GPIO_INTMASK_OFFSET(BANK)	(0x20C + (0x40 * BANK))
+/* Interrupt enable reg-WO */
+#define ZYNQ_GPIO_INTEN_OFFSET(BANK)	(0x210 + (0x40 * BANK))
+/* Interrupt disable reg-WO */
+#define ZYNQ_GPIO_INTDIS_OFFSET(BANK)	(0x214 + (0x40 * BANK))
+/* Interrupt status reg-RO */
+#define ZYNQ_GPIO_INTSTS_OFFSET(BANK)	(0x218 + (0x40 * BANK))
+/* Interrupt type reg-RW */
+#define ZYNQ_GPIO_INTTYPE_OFFSET(BANK)	(0x21C + (0x40 * BANK))
+/* Interrupt polarity reg-RW */
+#define ZYNQ_GPIO_INTPOL_OFFSET(BANK)	(0x220 + (0x40 * BANK))
+/* Interrupt on any, reg-RW */
+#define ZYNQ_GPIO_INTANY_OFFSET(BANK)	(0x224 + (0x40 * BANK))
+
+/* Disable all interrupts mask */
+#define ZYNQ_GPIO_IXR_DISABLE_ALL	0xFFFFFFFF
+
+/* Mid pin number of a bank */
+#define ZYNQ_GPIO_MID_PIN_NUM 16
+
+/* GPIO upper 16 bit mask */
+#define ZYNQ_GPIO_UPPER_MASK 0xFFFF0000
+
+/* set to differentiate zynq from zynqmp, 0=zynqmp, 1=zynq */
+#define ZYNQ_GPIO_QUIRK_IS_ZYNQ	BIT(0)
+#define GPIO_QUIRK_DATA_RO_BUG	BIT(1)
+#define GPIO_QUIRK_VERSAL	BIT(2)
+
+struct gpio_regs {
+	u32 datamsw[ZYNQMP_GPIO_MAX_BANK];
+	u32 datalsw[ZYNQMP_GPIO_MAX_BANK];
+	u32 dirm[ZYNQMP_GPIO_MAX_BANK];
+	u32 outen[ZYNQMP_GPIO_MAX_BANK];
+	u32 int_en[ZYNQMP_GPIO_MAX_BANK];
+	u32 int_dis[ZYNQMP_GPIO_MAX_BANK];
+	u32 int_type[ZYNQMP_GPIO_MAX_BANK];
+	u32 int_polarity[ZYNQMP_GPIO_MAX_BANK];
+	u32 int_any[ZYNQMP_GPIO_MAX_BANK];
+};
+
+/**
+ * struct zynq_gpio - gpio device private data structure
+ * @chip:	instance of the gpio_chip
+ * @base_addr:	base address of the GPIO device
+ * @clk:	clock resource for this controller
+ * @irq:	interrupt for the GPIO device
+ * @p_data:	pointer to platform data
+ * @context:	context registers
+ * @dirlock:	lock used for direction in/out synchronization
+ */
+struct zynq_gpio {
+	struct gpio_chip chip;
+	void __iomem *base_addr;
+	struct clk *clk;
+	int irq;
+	const struct zynq_platform_data *p_data;
+	struct gpio_regs context;
+	spinlock_t dirlock; /* lock */
+};
+
+/**
+ * struct zynq_platform_data -  zynq gpio platform data structure
+ * @label:	string to store in gpio->label
+ * @quirks:	Flags is used to identify the platform
+ * @ngpio:	max number of gpio pins
+ * @max_bank:	maximum number of gpio banks
+ * @bank_min:	this array represents bank's min pin
+ * @bank_max:	this array represents bank's max pin
+ */
+struct zynq_platform_data {
+	const char *label;
+	u32 quirks;
+	u16 ngpio;
+	int max_bank;
+	int bank_min[ZYNQMP_GPIO_MAX_BANK];
+	int bank_max[ZYNQMP_GPIO_MAX_BANK];
+};
+
+static struct irq_chip zynq_gpio_level_irqchip;
+static struct irq_chip zynq_gpio_edge_irqchip;
+
+/**
+ * zynq_gpio_is_zynq - test if HW is zynq or zynqmp
+ * @gpio:	Pointer to driver data struct
+ *
+ * Return: 0 if zynqmp, 1 if zynq.
+ */
+static int zynq_gpio_is_zynq(struct zynq_gpio *gpio)
+{
+	return !!(gpio->p_data->quirks & ZYNQ_GPIO_QUIRK_IS_ZYNQ);
+}
+
+/**
+ * gpio_data_ro_bug - test if HW bug exists or not
+ * @gpio:       Pointer to driver data struct
+ *
+ * Return: 0 if bug doesnot exist, 1 if bug exists.
+ */
+static int gpio_data_ro_bug(struct zynq_gpio *gpio)
+{
+	return !!(gpio->p_data->quirks & GPIO_QUIRK_DATA_RO_BUG);
+}
+
+/**
+ * zynq_gpio_get_bank_pin - Get the bank number and pin number within that bank
+ * for a given pin in the GPIO device
+ * @pin_num:	gpio pin number within the device
+ * @bank_num:	an output parameter used to return the bank number of the gpio
+ *		pin
+ * @bank_pin_num: an output parameter used to return pin number within a bank
+ *		  for the given gpio pin
+ * @gpio:	gpio device data structure
+ *
+ * Returns the bank number and pin offset within the bank.
+ */
+static inline void zynq_gpio_get_bank_pin(unsigned int pin_num,
+					  unsigned int *bank_num,
+					  unsigned int *bank_pin_num,
+					  struct zynq_gpio *gpio)
+{
+	int bank;
+
+	for (bank = 0; bank < gpio->p_data->max_bank; bank++) {
+		if ((pin_num >= gpio->p_data->bank_min[bank]) &&
+		    (pin_num <= gpio->p_data->bank_max[bank])) {
+			*bank_num = bank;
+			*bank_pin_num = pin_num -
+					gpio->p_data->bank_min[bank];
+			return;
+		}
+		if (gpio->p_data->quirks & GPIO_QUIRK_VERSAL)
+			bank = bank + VERSAL_UNUSED_BANKS;
+	}
+
+	/* default */
+	WARN(true, "invalid GPIO pin number: %u", pin_num);
+	*bank_num = 0;
+	*bank_pin_num = 0;
+}
+
+/**
+ * zynq_gpio_get_value - Get the state of the specified pin of GPIO device
+ * @chip:	gpio_chip instance to be worked on
+ * @pin:	gpio pin number within the device
+ *
+ * This function reads the state of the specified pin of the GPIO device.
+ *
+ * Return: 0 if the pin is low, 1 if pin is high.
+ */
+static int zynq_gpio_get_value(struct gpio_chip *chip, unsigned int pin)
+{
+	u32 data;
+	unsigned int bank_num, bank_pin_num;
+	struct zynq_gpio *gpio = gpiochip_get_data(chip);
+
+	zynq_gpio_get_bank_pin(pin, &bank_num, &bank_pin_num, gpio);
+
+	if (gpio_data_ro_bug(gpio)) {
+		if (zynq_gpio_is_zynq(gpio)) {
+			if (bank_num <= 1) {
+				data = readl_relaxed(gpio->base_addr +
+					ZYNQ_GPIO_DATA_RO_OFFSET(bank_num));
+			} else {
+				data = readl_relaxed(gpio->base_addr +
+					ZYNQ_GPIO_DATA_OFFSET(bank_num));
+			}
+		} else {
+			if (bank_num <= 2) {
+				data = readl_relaxed(gpio->base_addr +
+					ZYNQ_GPIO_DATA_RO_OFFSET(bank_num));
+			} else {
+				data = readl_relaxed(gpio->base_addr +
+					ZYNQ_GPIO_DATA_OFFSET(bank_num));
+			}
+		}
+	} else {
+		data = readl_relaxed(gpio->base_addr +
+			ZYNQ_GPIO_DATA_RO_OFFSET(bank_num));
+	}
+	return (data >> bank_pin_num) & 1;
+}
+
+/**
+ * zynq_gpio_set_value - Modify the state of the pin with specified value
+ * @chip:	gpio_chip instance to be worked on
+ * @pin:	gpio pin number within the device
+ * @state:	value used to modify the state of the specified pin
+ *
+ * This function calculates the register offset (i.e to lower 16 bits or
+ * upper 16 bits) based on the given pin number and sets the state of a
+ * gpio pin to the specified value. The state is either 0 or non-zero.
+ */
+static void zynq_gpio_set_value(struct gpio_chip *chip, unsigned int pin,
+				int state)
+{
+	unsigned int reg_offset, bank_num, bank_pin_num;
+	struct zynq_gpio *gpio = gpiochip_get_data(chip);
+
+	zynq_gpio_get_bank_pin(pin, &bank_num, &bank_pin_num, gpio);
+
+	if (bank_pin_num >= ZYNQ_GPIO_MID_PIN_NUM) {
+		/* only 16 data bits in bit maskable reg */
+		bank_pin_num -= ZYNQ_GPIO_MID_PIN_NUM;
+		reg_offset = ZYNQ_GPIO_DATA_MSW_OFFSET(bank_num);
+	} else {
+		reg_offset = ZYNQ_GPIO_DATA_LSW_OFFSET(bank_num);
+	}
+
+	/*
+	 * get the 32 bit value to be written to the mask/data register where
+	 * the upper 16 bits is the mask and lower 16 bits is the data
+	 */
+	state = !!state;
+	state = ~(1 << (bank_pin_num + ZYNQ_GPIO_MID_PIN_NUM)) &
+		((state << bank_pin_num) | ZYNQ_GPIO_UPPER_MASK);
+
+	writel_relaxed(state, gpio->base_addr + reg_offset);
+}
+
+/**
+ * zynq_gpio_dir_in - Set the direction of the specified GPIO pin as input
+ * @chip:	gpio_chip instance to be worked on
+ * @pin:	gpio pin number within the device
+ *
+ * This function uses the read-modify-write sequence to set the direction of
+ * the gpio pin as input.
+ *
+ * Return: 0 always
+ */
+static int zynq_gpio_dir_in(struct gpio_chip *chip, unsigned int pin)
+{
+	u32 reg;
+	unsigned int bank_num, bank_pin_num;
+	unsigned long flags;
+	struct zynq_gpio *gpio = gpiochip_get_data(chip);
+
+	zynq_gpio_get_bank_pin(pin, &bank_num, &bank_pin_num, gpio);
+
+	/*
+	 * On zynq bank 0 pins 7 and 8 are special and cannot be used
+	 * as inputs.
+	 */
+	if (zynq_gpio_is_zynq(gpio) && bank_num == 0 &&
+	    (bank_pin_num == 7 || bank_pin_num == 8))
+		return -EINVAL;
+
+	/* clear the bit in direction mode reg to set the pin as input */
+	spin_lock_irqsave(&gpio->dirlock, flags);
+	reg = readl_relaxed(gpio->base_addr + ZYNQ_GPIO_DIRM_OFFSET(bank_num));
+	reg &= ~BIT(bank_pin_num);
+	writel_relaxed(reg, gpio->base_addr + ZYNQ_GPIO_DIRM_OFFSET(bank_num));
+	spin_unlock_irqrestore(&gpio->dirlock, flags);
+
+	return 0;
+}
+
+/**
+ * zynq_gpio_dir_out - Set the direction of the specified GPIO pin as output
+ * @chip:	gpio_chip instance to be worked on
+ * @pin:	gpio pin number within the device
+ * @state:	value to be written to specified pin
+ *
+ * This function sets the direction of specified GPIO pin as output, configures
+ * the Output Enable register for the pin and uses zynq_gpio_set to set
+ * the state of the pin to the value specified.
+ *
+ * Return: 0 always
+ */
+static int zynq_gpio_dir_out(struct gpio_chip *chip, unsigned int pin,
+			     int state)
+{
+	u32 reg;
+	unsigned int bank_num, bank_pin_num;
+	unsigned long flags;
+	struct zynq_gpio *gpio = gpiochip_get_data(chip);
+
+	zynq_gpio_get_bank_pin(pin, &bank_num, &bank_pin_num, gpio);
+
+	/* set the GPIO pin as output */
+	spin_lock_irqsave(&gpio->dirlock, flags);
+	reg = readl_relaxed(gpio->base_addr + ZYNQ_GPIO_DIRM_OFFSET(bank_num));
+	reg |= BIT(bank_pin_num);
+	writel_relaxed(reg, gpio->base_addr + ZYNQ_GPIO_DIRM_OFFSET(bank_num));
+
+	/* configure the output enable reg for the pin */
+	reg = readl_relaxed(gpio->base_addr + ZYNQ_GPIO_OUTEN_OFFSET(bank_num));
+	reg |= BIT(bank_pin_num);
+	writel_relaxed(reg, gpio->base_addr + ZYNQ_GPIO_OUTEN_OFFSET(bank_num));
+	spin_unlock_irqrestore(&gpio->dirlock, flags);
+
+	/* set the state of the pin */
+	zynq_gpio_set_value(chip, pin, state);
+	return 0;
+}
+
+/**
+ * zynq_gpio_get_direction - Read the direction of the specified GPIO pin
+ * @chip:	gpio_chip instance to be worked on
+ * @pin:	gpio pin number within the device
+ *
+ * This function returns the direction of the specified GPIO.
+ *
+ * Return: GPIO_LINE_DIRECTION_OUT or GPIO_LINE_DIRECTION_IN
+ */
+static int zynq_gpio_get_direction(struct gpio_chip *chip, unsigned int pin)
+{
+	u32 reg;
+	unsigned int bank_num, bank_pin_num;
+	struct zynq_gpio *gpio = gpiochip_get_data(chip);
+
+	zynq_gpio_get_bank_pin(pin, &bank_num, &bank_pin_num, gpio);
+
+	reg = readl_relaxed(gpio->base_addr + ZYNQ_GPIO_DIRM_OFFSET(bank_num));
+
+	if (reg & BIT(bank_pin_num))
+		return GPIO_LINE_DIRECTION_OUT;
+
+	return GPIO_LINE_DIRECTION_IN;
+}
+
+/**
+ * zynq_gpio_irq_mask - Disable the interrupts for a gpio pin
+ * @irq_data:	per irq and chip data passed down to chip functions
+ *
+ * This function calculates gpio pin number from irq number and sets the
+ * bit in the Interrupt Disable register of the corresponding bank to disable
+ * interrupts for that pin.
+ */
+static void zynq_gpio_irq_mask(struct irq_data *irq_data)
+{
+	unsigned int device_pin_num, bank_num, bank_pin_num;
+	struct zynq_gpio *gpio =
+		gpiochip_get_data(irq_data_get_irq_chip_data(irq_data));
+
+	device_pin_num = irq_data->hwirq;
+	zynq_gpio_get_bank_pin(device_pin_num, &bank_num, &bank_pin_num, gpio);
+	writel_relaxed(BIT(bank_pin_num),
+		       gpio->base_addr + ZYNQ_GPIO_INTDIS_OFFSET(bank_num));
+}
+
+/**
+ * zynq_gpio_irq_unmask - Enable the interrupts for a gpio pin
+ * @irq_data:	irq data containing irq number of gpio pin for the interrupt
+ *		to enable
+ *
+ * This function calculates the gpio pin number from irq number and sets the
+ * bit in the Interrupt Enable register of the corresponding bank to enable
+ * interrupts for that pin.
+ */
+static void zynq_gpio_irq_unmask(struct irq_data *irq_data)
+{
+	unsigned int device_pin_num, bank_num, bank_pin_num;
+	struct zynq_gpio *gpio =
+		gpiochip_get_data(irq_data_get_irq_chip_data(irq_data));
+
+	device_pin_num = irq_data->hwirq;
+	zynq_gpio_get_bank_pin(device_pin_num, &bank_num, &bank_pin_num, gpio);
+	writel_relaxed(BIT(bank_pin_num),
+		       gpio->base_addr + ZYNQ_GPIO_INTEN_OFFSET(bank_num));
+}
+
+/**
+ * zynq_gpio_irq_ack - Acknowledge the interrupt of a gpio pin
+ * @irq_data:	irq data containing irq number of gpio pin for the interrupt
+ *		to ack
+ *
+ * This function calculates gpio pin number from irq number and sets the bit
+ * in the Interrupt Status Register of the corresponding bank, to ACK the irq.
+ */
+static void zynq_gpio_irq_ack(struct irq_data *irq_data)
+{
+	unsigned int device_pin_num, bank_num, bank_pin_num;
+	struct zynq_gpio *gpio =
+		gpiochip_get_data(irq_data_get_irq_chip_data(irq_data));
+
+	device_pin_num = irq_data->hwirq;
+	zynq_gpio_get_bank_pin(device_pin_num, &bank_num, &bank_pin_num, gpio);
+	writel_relaxed(BIT(bank_pin_num),
+		       gpio->base_addr + ZYNQ_GPIO_INTSTS_OFFSET(bank_num));
+}
+
+/**
+ * zynq_gpio_irq_enable - Enable the interrupts for a gpio pin
+ * @irq_data:	irq data containing irq number of gpio pin for the interrupt
+ *		to enable
+ *
+ * Clears the INTSTS bit and unmasks the given interrupt.
+ */
+static void zynq_gpio_irq_enable(struct irq_data *irq_data)
+{
+	/*
+	 * The Zynq GPIO controller does not disable interrupt detection when
+	 * the interrupt is masked and only disables the propagation of the
+	 * interrupt. This means when the controller detects an interrupt
+	 * condition while the interrupt is logically disabled it will propagate
+	 * that interrupt event once the interrupt is enabled. This will cause
+	 * the interrupt consumer to see spurious interrupts to prevent this
+	 * first make sure that the interrupt is not asserted and then enable
+	 * it.
+	 */
+	zynq_gpio_irq_ack(irq_data);
+	zynq_gpio_irq_unmask(irq_data);
+}
+
+/**
+ * zynq_gpio_set_irq_type - Set the irq type for a gpio pin
+ * @irq_data:	irq data containing irq number of gpio pin
+ * @type:	interrupt type that is to be set for the gpio pin
+ *
+ * This function gets the gpio pin number and its bank from the gpio pin number
+ * and configures the INT_TYPE, INT_POLARITY and INT_ANY registers.
+ *
+ * Return: 0, negative error otherwise.
+ * TYPE-EDGE_RISING,  INT_TYPE - 1, INT_POLARITY - 1,  INT_ANY - 0;
+ * TYPE-EDGE_FALLING, INT_TYPE - 1, INT_POLARITY - 0,  INT_ANY - 0;
+ * TYPE-EDGE_BOTH,    INT_TYPE - 1, INT_POLARITY - NA, INT_ANY - 1;
+ * TYPE-LEVEL_HIGH,   INT_TYPE - 0, INT_POLARITY - 1,  INT_ANY - NA;
+ * TYPE-LEVEL_LOW,    INT_TYPE - 0, INT_POLARITY - 0,  INT_ANY - NA
+ */
+static int zynq_gpio_set_irq_type(struct irq_data *irq_data, unsigned int type)
+{
+	u32 int_type, int_pol, int_any;
+	unsigned int device_pin_num, bank_num, bank_pin_num;
+	struct zynq_gpio *gpio =
+		gpiochip_get_data(irq_data_get_irq_chip_data(irq_data));
+
+	device_pin_num = irq_data->hwirq;
+	zynq_gpio_get_bank_pin(device_pin_num, &bank_num, &bank_pin_num, gpio);
+
+	int_type = readl_relaxed(gpio->base_addr +
+				 ZYNQ_GPIO_INTTYPE_OFFSET(bank_num));
+	int_pol = readl_relaxed(gpio->base_addr +
+				ZYNQ_GPIO_INTPOL_OFFSET(bank_num));
+	int_any = readl_relaxed(gpio->base_addr +
+				ZYNQ_GPIO_INTANY_OFFSET(bank_num));
+
+	/*
+	 * based on the type requested, configure the INT_TYPE, INT_POLARITY
+	 * and INT_ANY registers
+	 */
+	switch (type) {
+	case IRQ_TYPE_EDGE_RISING:
+		int_type |= BIT(bank_pin_num);
+		int_pol |= BIT(bank_pin_num);
+		int_any &= ~BIT(bank_pin_num);
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		int_type |= BIT(bank_pin_num);
+		int_pol &= ~BIT(bank_pin_num);
+		int_any &= ~BIT(bank_pin_num);
+		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		int_type |= BIT(bank_pin_num);
+		int_any |= BIT(bank_pin_num);
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		int_type &= ~BIT(bank_pin_num);
+		int_pol |= BIT(bank_pin_num);
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		int_type &= ~BIT(bank_pin_num);
+		int_pol &= ~BIT(bank_pin_num);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	writel_relaxed(int_type,
+		       gpio->base_addr + ZYNQ_GPIO_INTTYPE_OFFSET(bank_num));
+	writel_relaxed(int_pol,
+		       gpio->base_addr + ZYNQ_GPIO_INTPOL_OFFSET(bank_num));
+	writel_relaxed(int_any,
+		       gpio->base_addr + ZYNQ_GPIO_INTANY_OFFSET(bank_num));
+
+	if (type & IRQ_TYPE_LEVEL_MASK)
+		irq_set_chip_handler_name_locked(irq_data,
+						 &zynq_gpio_level_irqchip,
+						 handle_fasteoi_irq, NULL);
+	else
+		irq_set_chip_handler_name_locked(irq_data,
+						 &zynq_gpio_edge_irqchip,
+						 handle_level_irq, NULL);
+
+	return 0;
+}
+
+static int zynq_gpio_set_wake(struct irq_data *data, unsigned int on)
+{
+	struct zynq_gpio *gpio =
+		gpiochip_get_data(irq_data_get_irq_chip_data(data));
+
+	irq_set_irq_wake(gpio->irq, on);
+
+	return 0;
+}
+
+static int zynq_gpio_irq_reqres(struct irq_data *d)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(d);
+	int ret;
+
+	ret = pm_runtime_resume_and_get(chip->parent);
+	if (ret < 0)
+		return ret;
+
+	return gpiochip_reqres_irq(chip, d->hwirq);
+}
+
+static void zynq_gpio_irq_relres(struct irq_data *d)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(d);
+
+	gpiochip_relres_irq(chip, d->hwirq);
+	pm_runtime_put(chip->parent);
+}
+
+/* irq chip descriptor */
+static struct irq_chip zynq_gpio_level_irqchip = {
+	.name		= DRIVER_NAME,
+	.irq_enable	= zynq_gpio_irq_enable,
+	.irq_eoi	= zynq_gpio_irq_ack,
+	.irq_mask	= zynq_gpio_irq_mask,
+	.irq_unmask	= zynq_gpio_irq_unmask,
+	.irq_set_type	= zynq_gpio_set_irq_type,
+	.irq_set_wake	= zynq_gpio_set_wake,
+	.irq_request_resources = zynq_gpio_irq_reqres,
+	.irq_release_resources = zynq_gpio_irq_relres,
+	.flags		= IRQCHIP_EOI_THREADED | IRQCHIP_EOI_IF_HANDLED |
+			  IRQCHIP_MASK_ON_SUSPEND,
+};
+
+static struct irq_chip zynq_gpio_edge_irqchip = {
+	.name		= DRIVER_NAME,
+	.irq_enable	= zynq_gpio_irq_enable,
+	.irq_ack	= zynq_gpio_irq_ack,
+	.irq_mask	= zynq_gpio_irq_mask,
+	.irq_unmask	= zynq_gpio_irq_unmask,
+	.irq_set_type	= zynq_gpio_set_irq_type,
+	.irq_set_wake	= zynq_gpio_set_wake,
+	.irq_request_resources = zynq_gpio_irq_reqres,
+	.irq_release_resources = zynq_gpio_irq_relres,
+	.flags		= IRQCHIP_MASK_ON_SUSPEND,
+};
+
+static void zynq_gpio_handle_bank_irq(struct zynq_gpio *gpio,
+				      unsigned int bank_num,
+				      unsigned long pending)
+{
+	unsigned int bank_offset = gpio->p_data->bank_min[bank_num];
+	struct irq_domain *irqdomain = gpio->chip.irq.domain;
+	int offset;
+
+	if (!pending)
+		return;
+
+	for_each_set_bit(offset, &pending, 32) {
+		unsigned int gpio_irq;
+
+		gpio_irq = irq_find_mapping(irqdomain, offset + bank_offset);
+		generic_handle_irq(gpio_irq);
+	}
+}
+
+/**
+ * zynq_gpio_irqhandler - IRQ handler for the gpio banks of a gpio device
+ * @desc:	irq descriptor instance of the 'irq'
+ *
+ * This function reads the Interrupt Status Register of each bank to get the
+ * gpio pin number which has triggered an interrupt. It then acks the triggered
+ * interrupt and calls the pin specific handler set by the higher layer
+ * application for that pin.
+ * Note: A bug is reported if no handler is set for the gpio pin.
+ */
+static void zynq_gpio_irqhandler(struct irq_desc *desc)
+{
+	u32 int_sts, int_enb;
+	unsigned int bank_num;
+	struct zynq_gpio *gpio =
+		gpiochip_get_data(irq_desc_get_handler_data(desc));
+	struct irq_chip *irqchip = irq_desc_get_chip(desc);
+
+	chained_irq_enter(irqchip, desc);
+
+	for (bank_num = 0; bank_num < gpio->p_data->max_bank; bank_num++) {
+		int_sts = readl_relaxed(gpio->base_addr +
+					ZYNQ_GPIO_INTSTS_OFFSET(bank_num));
+		int_enb = readl_relaxed(gpio->base_addr +
+					ZYNQ_GPIO_INTMASK_OFFSET(bank_num));
+		zynq_gpio_handle_bank_irq(gpio, bank_num, int_sts & ~int_enb);
+		if (gpio->p_data->quirks & GPIO_QUIRK_VERSAL)
+			bank_num = bank_num + VERSAL_UNUSED_BANKS;
+	}
+
+	chained_irq_exit(irqchip, desc);
+}
+
+static void zynq_gpio_save_context(struct zynq_gpio *gpio)
+{
+	unsigned int bank_num;
+
+	for (bank_num = 0; bank_num < gpio->p_data->max_bank; bank_num++) {
+		gpio->context.datalsw[bank_num] =
+				readl_relaxed(gpio->base_addr +
+				ZYNQ_GPIO_DATA_LSW_OFFSET(bank_num));
+		gpio->context.datamsw[bank_num] =
+				readl_relaxed(gpio->base_addr +
+				ZYNQ_GPIO_DATA_MSW_OFFSET(bank_num));
+		gpio->context.dirm[bank_num] = readl_relaxed(gpio->base_addr +
+				ZYNQ_GPIO_DIRM_OFFSET(bank_num));
+		gpio->context.int_en[bank_num] = readl_relaxed(gpio->base_addr +
+				ZYNQ_GPIO_INTMASK_OFFSET(bank_num));
+		gpio->context.int_type[bank_num] =
+				readl_relaxed(gpio->base_addr +
+				ZYNQ_GPIO_INTTYPE_OFFSET(bank_num));
+		gpio->context.int_polarity[bank_num] =
+				readl_relaxed(gpio->base_addr +
+				ZYNQ_GPIO_INTPOL_OFFSET(bank_num));
+		gpio->context.int_any[bank_num] =
+				readl_relaxed(gpio->base_addr +
+				ZYNQ_GPIO_INTANY_OFFSET(bank_num));
+		if (gpio->p_data->quirks & GPIO_QUIRK_VERSAL)
+			bank_num = bank_num + VERSAL_UNUSED_BANKS;
+	}
+}
+
+static void zynq_gpio_restore_context(struct zynq_gpio *gpio)
+{
+	unsigned int bank_num;
+
+	for (bank_num = 0; bank_num < gpio->p_data->max_bank; bank_num++) {
+		writel_relaxed(ZYNQ_GPIO_IXR_DISABLE_ALL, gpio->base_addr +
+				ZYNQ_GPIO_INTDIS_OFFSET(bank_num));
+		writel_relaxed(gpio->context.datalsw[bank_num],
+			       gpio->base_addr +
+			       ZYNQ_GPIO_DATA_LSW_OFFSET(bank_num));
+		writel_relaxed(gpio->context.datamsw[bank_num],
+			       gpio->base_addr +
+			       ZYNQ_GPIO_DATA_MSW_OFFSET(bank_num));
+		writel_relaxed(gpio->context.dirm[bank_num],
+			       gpio->base_addr +
+			       ZYNQ_GPIO_DIRM_OFFSET(bank_num));
+		writel_relaxed(gpio->context.int_type[bank_num],
+			       gpio->base_addr +
+			       ZYNQ_GPIO_INTTYPE_OFFSET(bank_num));
+		writel_relaxed(gpio->context.int_polarity[bank_num],
+			       gpio->base_addr +
+			       ZYNQ_GPIO_INTPOL_OFFSET(bank_num));
+		writel_relaxed(gpio->context.int_any[bank_num],
+			       gpio->base_addr +
+			       ZYNQ_GPIO_INTANY_OFFSET(bank_num));
+		writel_relaxed(~(gpio->context.int_en[bank_num]),
+			       gpio->base_addr +
+			       ZYNQ_GPIO_INTEN_OFFSET(bank_num));
+		if (gpio->p_data->quirks & GPIO_QUIRK_VERSAL)
+			bank_num = bank_num + VERSAL_UNUSED_BANKS;
+	}
+}
+
+static int __maybe_unused zynq_gpio_suspend(struct device *dev)
+{
+	struct zynq_gpio *gpio = dev_get_drvdata(dev);
+	struct irq_data *data = irq_get_irq_data(gpio->irq);
+
+	if (!data) {
+		dev_err(dev, "irq_get_irq_data() failed\n");
+		return -EINVAL;
+	}
+
+	if (!device_may_wakeup(dev))
+		disable_irq(gpio->irq);
+
+	if (!irqd_is_wakeup_set(data)) {
+		zynq_gpio_save_context(gpio);
+		return pm_runtime_force_suspend(dev);
+	}
+
+	return 0;
+}
+
+static int __maybe_unused zynq_gpio_resume(struct device *dev)
+{
+	struct zynq_gpio *gpio = dev_get_drvdata(dev);
+	struct irq_data *data = irq_get_irq_data(gpio->irq);
+	int ret;
+
+	if (!data) {
+		dev_err(dev, "irq_get_irq_data() failed\n");
+		return -EINVAL;
+	}
+
+	if (!device_may_wakeup(dev))
+		enable_irq(gpio->irq);
+
+	if (!irqd_is_wakeup_set(data)) {
+		ret = pm_runtime_force_resume(dev);
+		zynq_gpio_restore_context(gpio);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int __maybe_unused zynq_gpio_runtime_suspend(struct device *dev)
+{
+	struct zynq_gpio *gpio = dev_get_drvdata(dev);
+
+	clk_disable_unprepare(gpio->clk);
+
+	return 0;
+}
+
+static int __maybe_unused zynq_gpio_runtime_resume(struct device *dev)
+{
+	struct zynq_gpio *gpio = dev_get_drvdata(dev);
+
+	return clk_prepare_enable(gpio->clk);
+}
+
+static int zynq_gpio_request(struct gpio_chip *chip, unsigned int offset)
+{
+	int ret;
+
+	ret = pm_runtime_get_sync(chip->parent);
+
+	/*
+	 * If the device is already active pm_runtime_get() will return 1 on
+	 * success, but gpio_request still needs to return 0.
+	 */
+	return ret < 0 ? ret : 0;
+}
+
+static void zynq_gpio_free(struct gpio_chip *chip, unsigned int offset)
+{
+	pm_runtime_put(chip->parent);
+}
+
+static const struct dev_pm_ops zynq_gpio_dev_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(zynq_gpio_suspend, zynq_gpio_resume)
+	SET_RUNTIME_PM_OPS(zynq_gpio_runtime_suspend,
+			   zynq_gpio_runtime_resume, NULL)
+};
+
+static const struct zynq_platform_data versal_gpio_def = {
+	.label = "versal_gpio",
+	.quirks = GPIO_QUIRK_VERSAL,
+	.ngpio = 58,
+	.max_bank = VERSAL_GPIO_MAX_BANK,
+	.bank_min[0] = 0,
+	.bank_max[0] = 25, /* 0 to 25 are connected to MIOs (26 pins) */
+	.bank_min[3] = 26,
+	.bank_max[3] = 57, /* Bank 3 is connected to FMIOs (32 pins) */
+};
+
+static const struct zynq_platform_data pmc_gpio_def = {
+	.label = "pmc_gpio",
+	.ngpio = 116,
+	.max_bank = PMC_GPIO_MAX_BANK,
+	.bank_min[0] = 0,
+	.bank_max[0] = 25, /* 0 to 25 are connected to MIOs (26 pins) */
+	.bank_min[1] = 26,
+	.bank_max[1] = 51, /* Bank 1 are connected to MIOs (26 pins) */
+	.bank_min[3] = 52,
+	.bank_max[3] = 83, /* Bank 3 is connected to EMIOs (32 pins) */
+	.bank_min[4] = 84,
+	.bank_max[4] = 115, /* Bank 4 is connected to EMIOs (32 pins) */
+};
+
+static const struct zynq_platform_data zynqmp_gpio_def = {
+	.label = "zynqmp_gpio",
+	.quirks = GPIO_QUIRK_DATA_RO_BUG,
+	.ngpio = ZYNQMP_GPIO_NR_GPIOS,
+	.max_bank = ZYNQMP_GPIO_MAX_BANK,
+	.bank_min[0] = ZYNQ_GPIO_BANK0_PIN_MIN(MP),
+	.bank_max[0] = ZYNQ_GPIO_BANK0_PIN_MAX(MP),
+	.bank_min[1] = ZYNQ_GPIO_BANK1_PIN_MIN(MP),
+	.bank_max[1] = ZYNQ_GPIO_BANK1_PIN_MAX(MP),
+	.bank_min[2] = ZYNQ_GPIO_BANK2_PIN_MIN(MP),
+	.bank_max[2] = ZYNQ_GPIO_BANK2_PIN_MAX(MP),
+	.bank_min[3] = ZYNQ_GPIO_BANK3_PIN_MIN(MP),
+	.bank_max[3] = ZYNQ_GPIO_BANK3_PIN_MAX(MP),
+	.bank_min[4] = ZYNQ_GPIO_BANK4_PIN_MIN(MP),
+	.bank_max[4] = ZYNQ_GPIO_BANK4_PIN_MAX(MP),
+	.bank_min[5] = ZYNQ_GPIO_BANK5_PIN_MIN(MP),
+	.bank_max[5] = ZYNQ_GPIO_BANK5_PIN_MAX(MP),
+};
+
+static const struct zynq_platform_data zynq_gpio_def = {
+	.label = "zynq_gpio",
+	.quirks = ZYNQ_GPIO_QUIRK_IS_ZYNQ | GPIO_QUIRK_DATA_RO_BUG,
+	.ngpio = ZYNQ_GPIO_NR_GPIOS,
+	.max_bank = ZYNQ_GPIO_MAX_BANK,
+	.bank_min[0] = ZYNQ_GPIO_BANK0_PIN_MIN(),
+	.bank_max[0] = ZYNQ_GPIO_BANK0_PIN_MAX(),
+	.bank_min[1] = ZYNQ_GPIO_BANK1_PIN_MIN(),
+	.bank_max[1] = ZYNQ_GPIO_BANK1_PIN_MAX(),
+	.bank_min[2] = ZYNQ_GPIO_BANK2_PIN_MIN(),
+	.bank_max[2] = ZYNQ_GPIO_BANK2_PIN_MAX(),
+	.bank_min[3] = ZYNQ_GPIO_BANK3_PIN_MIN(),
+	.bank_max[3] = ZYNQ_GPIO_BANK3_PIN_MAX(),
+};
+
+static const struct of_device_id zynq_gpio_of_match[] = {
+	{ .compatible = "xlnx,zynq-gpio-1.0", .data = &zynq_gpio_def },
+	{ .compatible = "xlnx,zynqmp-gpio-1.0", .data = &zynqmp_gpio_def },
+	{ .compatible = "xlnx,versal-gpio-1.0", .data = &versal_gpio_def },
+	{ .compatible = "xlnx,pmc-gpio-1.0", .data = &pmc_gpio_def },
+	{ /* end of table */ }
+};
+MODULE_DEVICE_TABLE(of, zynq_gpio_of_match);
+
+/**
+ * zynq_gpio_probe - Initialization method for a zynq_gpio device
+ * @pdev:	platform device instance
+ *
+ * This function allocates memory resources for the gpio device and registers
+ * all the banks of the device. It will also set up interrupts for the gpio
+ * pins.
+ * Note: Interrupts are disabled for all the banks during initialization.
+ *
+ * Return: 0 on success, negative error otherwise.
+ */
+static int zynq_gpio_probe(struct platform_device *pdev)
+{
+	int ret, bank_num;
+	struct zynq_gpio *gpio;
+	struct gpio_chip *chip;
+	struct gpio_irq_chip *girq;
+	const struct of_device_id *match;
+
+	gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
+	if (!gpio)
+		return -ENOMEM;
+
+	match = of_match_node(zynq_gpio_of_match, pdev->dev.of_node);
+	if (!match) {
+		dev_err(&pdev->dev, "of_match_node() failed\n");
+		return -EINVAL;
+	}
+	gpio->p_data = match->data;
+	platform_set_drvdata(pdev, gpio);
+
+	gpio->base_addr = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(gpio->base_addr))
+		return PTR_ERR(gpio->base_addr);
+
+	gpio->irq = platform_get_irq(pdev, 0);
+	if (gpio->irq < 0)
+		return gpio->irq;
+
+	/* configure the gpio chip */
+	chip = &gpio->chip;
+	chip->label = gpio->p_data->label;
+	chip->owner = THIS_MODULE;
+	chip->parent = &pdev->dev;
+	chip->get = zynq_gpio_get_value;
+	chip->set = zynq_gpio_set_value;
+	chip->request = zynq_gpio_request;
+	chip->free = zynq_gpio_free;
+	chip->direction_input = zynq_gpio_dir_in;
+	chip->direction_output = zynq_gpio_dir_out;
+	chip->get_direction = zynq_gpio_get_direction;
+	chip->base = of_alias_get_id(pdev->dev.of_node, "gpio");
+	chip->ngpio = gpio->p_data->ngpio;
+
+	/* Retrieve GPIO clock */
+	gpio->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(gpio->clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(gpio->clk), "input clock not found.\n");
+
+	ret = clk_prepare_enable(gpio->clk);
+	if (ret) {
+		dev_err(&pdev->dev, "Unable to enable clock.\n");
+		return ret;
+	}
+
+	spin_lock_init(&gpio->dirlock);
+
+	pm_runtime_set_active(&pdev->dev);
+	pm_runtime_enable(&pdev->dev);
+	ret = pm_runtime_resume_and_get(&pdev->dev);
+	if (ret < 0)
+		goto err_pm_dis;
+
+	/* disable interrupts for all banks */
+	for (bank_num = 0; bank_num < gpio->p_data->max_bank; bank_num++) {
+		writel_relaxed(ZYNQ_GPIO_IXR_DISABLE_ALL, gpio->base_addr +
+			       ZYNQ_GPIO_INTDIS_OFFSET(bank_num));
+		if (gpio->p_data->quirks & GPIO_QUIRK_VERSAL)
+			bank_num = bank_num + VERSAL_UNUSED_BANKS;
+	}
+
+	/* Set up the GPIO irqchip */
+	girq = &chip->irq;
+	girq->chip = &zynq_gpio_edge_irqchip;
+	girq->parent_handler = zynq_gpio_irqhandler;
+	girq->num_parents = 1;
+	girq->parents = devm_kcalloc(&pdev->dev, 1,
+				     sizeof(*girq->parents),
+				     GFP_KERNEL);
+	if (!girq->parents) {
+		ret = -ENOMEM;
+		goto err_pm_put;
+	}
+	girq->parents[0] = gpio->irq;
+	girq->default_type = IRQ_TYPE_NONE;
+	girq->handler = handle_level_irq;
+
+	/* report a bug if gpio chip registration fails */
+	ret = gpiochip_add_data(chip, gpio);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to add gpio chip\n");
+		goto err_pm_put;
+	}
+
+	irq_set_status_flags(gpio->irq, IRQ_DISABLE_UNLAZY);
+	device_init_wakeup(&pdev->dev, 1);
+	pm_runtime_put(&pdev->dev);
+
+	return 0;
+
+err_pm_put:
+	pm_runtime_put(&pdev->dev);
+err_pm_dis:
+	pm_runtime_disable(&pdev->dev);
+	clk_disable_unprepare(gpio->clk);
+
+	return ret;
+}
+
+/**
+ * zynq_gpio_remove - Driver removal function
+ * @pdev:	platform device instance
+ *
+ * Return: 0 always
+ */
+static int zynq_gpio_remove(struct platform_device *pdev)
+{
+	struct zynq_gpio *gpio = platform_get_drvdata(pdev);
+	int ret;
+
+	ret = pm_runtime_get_sync(&pdev->dev);
+	if (ret < 0)
+		dev_warn(&pdev->dev, "pm_runtime_get_sync() Failed\n");
+	gpiochip_remove(&gpio->chip);
+	clk_disable_unprepare(gpio->clk);
+	device_set_wakeup_capable(&pdev->dev, 0);
+	pm_runtime_disable(&pdev->dev);
+	return 0;
+}
+
+static struct platform_driver zynq_gpio_driver = {
+	.driver	= {
+		.name = DRIVER_NAME,
+		.pm = &zynq_gpio_dev_pm_ops,
+		.of_match_table = zynq_gpio_of_match,
+	},
+	.probe = zynq_gpio_probe,
+	.remove = zynq_gpio_remove,
+};
+
+/**
+ * zynq_gpio_init - Initial driver registration call
+ *
+ * Return: value from platform_driver_register
+ */
+static int __init zynq_gpio_init(void)
+{
+	return platform_driver_register(&zynq_gpio_driver);
+}
+postcore_initcall(zynq_gpio_init);
+
+static void __exit zynq_gpio_exit(void)
+{
+	platform_driver_unregister(&zynq_gpio_driver);
+}
+module_exit(zynq_gpio_exit);
+
+MODULE_AUTHOR("Xilinx Inc.");
+MODULE_DESCRIPTION("Zynq GPIO driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c
new file mode 100644
index 000000000..44ee319da
--- /dev/null
+++ b/drivers/gpio/gpiolib-acpi.c
@@ -0,0 +1,1508 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ACPI helpers for GPIO API
+ *
+ * Copyright (C) 2012, Intel Corporation
+ * Authors: Mathias Nyman <mathias.nyman@linux.intel.com>
+ *          Mika Westerberg <mika.westerberg@linux.intel.com>
+ */
+
+#include <linux/dmi.h>
+#include <linux/errno.h>
+#include <linux/gpio/consumer.h>
+#include <linux/gpio/driver.h>
+#include <linux/gpio/machine.h>
+#include <linux/export.h>
+#include <linux/acpi.h>
+#include <linux/interrupt.h>
+#include <linux/mutex.h>
+#include <linux/pinctrl/pinctrl.h>
+
+#include "gpiolib.h"
+#include "gpiolib-acpi.h"
+
+static int run_edge_events_on_boot = -1;
+module_param(run_edge_events_on_boot, int, 0444);
+MODULE_PARM_DESC(run_edge_events_on_boot,
+		 "Run edge _AEI event-handlers at boot: 0=no, 1=yes, -1=auto");
+
+static char *ignore_wake;
+module_param(ignore_wake, charp, 0444);
+MODULE_PARM_DESC(ignore_wake,
+		 "controller@pin combos on which to ignore the ACPI wake flag "
+		 "ignore_wake=controller@pin[,controller@pin[,...]]");
+
+struct acpi_gpiolib_dmi_quirk {
+	bool no_edge_events_on_boot;
+	char *ignore_wake;
+};
+
+/**
+ * struct acpi_gpio_event - ACPI GPIO event handler data
+ *
+ * @node:	  list-entry of the events list of the struct acpi_gpio_chip
+ * @handle:	  handle of ACPI method to execute when the IRQ triggers
+ * @handler:	  handler function to pass to request_irq() when requesting the IRQ
+ * @pin:	  GPIO pin number on the struct gpio_chip
+ * @irq:	  Linux IRQ number for the event, for request_irq() / free_irq()
+ * @irqflags:	  flags to pass to request_irq() when requesting the IRQ
+ * @irq_is_wake:  If the ACPI flags indicate the IRQ is a wakeup source
+ * @irq_requested:True if request_irq() has been done
+ * @desc:	  struct gpio_desc for the GPIO pin for this event
+ */
+struct acpi_gpio_event {
+	struct list_head node;
+	acpi_handle handle;
+	irq_handler_t handler;
+	unsigned int pin;
+	unsigned int irq;
+	unsigned long irqflags;
+	bool irq_is_wake;
+	bool irq_requested;
+	struct gpio_desc *desc;
+};
+
+struct acpi_gpio_connection {
+	struct list_head node;
+	unsigned int pin;
+	struct gpio_desc *desc;
+};
+
+struct acpi_gpio_chip {
+	/*
+	 * ACPICA requires that the first field of the context parameter
+	 * passed to acpi_install_address_space_handler() is large enough
+	 * to hold struct acpi_connection_info.
+	 */
+	struct acpi_connection_info conn_info;
+	struct list_head conns;
+	struct mutex conn_lock;
+	struct gpio_chip *chip;
+	struct list_head events;
+	struct list_head deferred_req_irqs_list_entry;
+};
+
+/*
+ * For GPIO chips which call acpi_gpiochip_request_interrupts() before late_init
+ * (so builtin drivers) we register the ACPI GpioInt IRQ handlers from a
+ * late_initcall_sync() handler, so that other builtin drivers can register their
+ * OpRegions before the event handlers can run. This list contains GPIO chips
+ * for which the acpi_gpiochip_request_irqs() call has been deferred.
+ */
+static DEFINE_MUTEX(acpi_gpio_deferred_req_irqs_lock);
+static LIST_HEAD(acpi_gpio_deferred_req_irqs_list);
+static bool acpi_gpio_deferred_req_irqs_done;
+
+static int acpi_gpiochip_find(struct gpio_chip *gc, void *data)
+{
+	if (!gc->parent)
+		return false;
+
+	return ACPI_HANDLE(gc->parent) == data;
+}
+
+/**
+ * acpi_get_gpiod() - Translate ACPI GPIO pin to GPIO descriptor usable with GPIO API
+ * @path:	ACPI GPIO controller full path name, (e.g. "\\_SB.GPO1")
+ * @pin:	ACPI GPIO pin number (0-based, controller-relative)
+ *
+ * Return: GPIO descriptor to use with Linux generic GPIO API, or ERR_PTR
+ * error value. Specifically returns %-EPROBE_DEFER if the referenced GPIO
+ * controller does not have GPIO chip registered at the moment. This is to
+ * support probe deferral.
+ */
+static struct gpio_desc *acpi_get_gpiod(char *path, int pin)
+{
+	struct gpio_chip *chip;
+	acpi_handle handle;
+	acpi_status status;
+
+	status = acpi_get_handle(NULL, path, &handle);
+	if (ACPI_FAILURE(status))
+		return ERR_PTR(-ENODEV);
+
+	chip = gpiochip_find(handle, acpi_gpiochip_find);
+	if (!chip)
+		return ERR_PTR(-EPROBE_DEFER);
+
+	return gpiochip_get_desc(chip, pin);
+}
+
+static irqreturn_t acpi_gpio_irq_handler(int irq, void *data)
+{
+	struct acpi_gpio_event *event = data;
+
+	acpi_evaluate_object(event->handle, NULL, NULL, NULL);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t acpi_gpio_irq_handler_evt(int irq, void *data)
+{
+	struct acpi_gpio_event *event = data;
+
+	acpi_execute_simple_method(event->handle, NULL, event->pin);
+
+	return IRQ_HANDLED;
+}
+
+static void acpi_gpio_chip_dh(acpi_handle handle, void *data)
+{
+	/* The address of this function is used as a key. */
+}
+
+bool acpi_gpio_get_irq_resource(struct acpi_resource *ares,
+				struct acpi_resource_gpio **agpio)
+{
+	struct acpi_resource_gpio *gpio;
+
+	if (ares->type != ACPI_RESOURCE_TYPE_GPIO)
+		return false;
+
+	gpio = &ares->data.gpio;
+	if (gpio->connection_type != ACPI_RESOURCE_GPIO_TYPE_INT)
+		return false;
+
+	*agpio = gpio;
+	return true;
+}
+EXPORT_SYMBOL_GPL(acpi_gpio_get_irq_resource);
+
+static void acpi_gpiochip_request_irq(struct acpi_gpio_chip *acpi_gpio,
+				      struct acpi_gpio_event *event)
+{
+	int ret, value;
+
+	ret = request_threaded_irq(event->irq, NULL, event->handler,
+				   event->irqflags | IRQF_ONESHOT, "ACPI:Event", event);
+	if (ret) {
+		dev_err(acpi_gpio->chip->parent,
+			"Failed to setup interrupt handler for %d\n",
+			event->irq);
+		return;
+	}
+
+	if (event->irq_is_wake)
+		enable_irq_wake(event->irq);
+
+	event->irq_requested = true;
+
+	/* Make sure we trigger the initial state of edge-triggered IRQs */
+	if (run_edge_events_on_boot &&
+	    (event->irqflags & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING))) {
+		value = gpiod_get_raw_value_cansleep(event->desc);
+		if (((event->irqflags & IRQF_TRIGGER_RISING) && value == 1) ||
+		    ((event->irqflags & IRQF_TRIGGER_FALLING) && value == 0))
+			event->handler(event->irq, event);
+	}
+}
+
+static void acpi_gpiochip_request_irqs(struct acpi_gpio_chip *acpi_gpio)
+{
+	struct acpi_gpio_event *event;
+
+	list_for_each_entry(event, &acpi_gpio->events, node)
+		acpi_gpiochip_request_irq(acpi_gpio, event);
+}
+
+static bool acpi_gpio_in_ignore_list(const char *controller_in, int pin_in)
+{
+	const char *controller, *pin_str;
+	int len, pin;
+	char *endp;
+
+	controller = ignore_wake;
+	while (controller) {
+		pin_str = strchr(controller, '@');
+		if (!pin_str)
+			goto err;
+
+		len = pin_str - controller;
+		if (len == strlen(controller_in) &&
+		    strncmp(controller, controller_in, len) == 0) {
+			pin = simple_strtoul(pin_str + 1, &endp, 10);
+			if (*endp != 0 && *endp != ',')
+				goto err;
+
+			if (pin == pin_in)
+				return true;
+		}
+
+		controller = strchr(controller, ',');
+		if (controller)
+			controller++;
+	}
+
+	return false;
+err:
+	pr_err_once("Error invalid value for gpiolib_acpi.ignore_wake: %s\n",
+		    ignore_wake);
+	return false;
+}
+
+static bool acpi_gpio_irq_is_wake(struct device *parent,
+				  struct acpi_resource_gpio *agpio)
+{
+	int pin = agpio->pin_table[0];
+
+	if (agpio->wake_capable != ACPI_WAKE_CAPABLE)
+		return false;
+
+	if (acpi_gpio_in_ignore_list(dev_name(parent), pin)) {
+		dev_info(parent, "Ignoring wakeup on pin %d\n", pin);
+		return false;
+	}
+
+	return true;
+}
+
+/* Always returns AE_OK so that we keep looping over the resources */
+static acpi_status acpi_gpiochip_alloc_event(struct acpi_resource *ares,
+					     void *context)
+{
+	struct acpi_gpio_chip *acpi_gpio = context;
+	struct gpio_chip *chip = acpi_gpio->chip;
+	struct acpi_resource_gpio *agpio;
+	acpi_handle handle, evt_handle;
+	struct acpi_gpio_event *event;
+	irq_handler_t handler = NULL;
+	struct gpio_desc *desc;
+	int ret, pin, irq;
+
+	if (!acpi_gpio_get_irq_resource(ares, &agpio))
+		return AE_OK;
+
+	handle = ACPI_HANDLE(chip->parent);
+	pin = agpio->pin_table[0];
+
+	if (pin <= 255) {
+		char ev_name[8];
+		sprintf(ev_name, "_%c%02X",
+			agpio->triggering == ACPI_EDGE_SENSITIVE ? 'E' : 'L',
+			pin);
+		if (ACPI_SUCCESS(acpi_get_handle(handle, ev_name, &evt_handle)))
+			handler = acpi_gpio_irq_handler;
+	}
+	if (!handler) {
+		if (ACPI_SUCCESS(acpi_get_handle(handle, "_EVT", &evt_handle)))
+			handler = acpi_gpio_irq_handler_evt;
+	}
+	if (!handler)
+		return AE_OK;
+
+	desc = gpiochip_request_own_desc(chip, pin, "ACPI:Event",
+					 GPIO_ACTIVE_HIGH, GPIOD_IN);
+	if (IS_ERR(desc)) {
+		dev_err(chip->parent,
+			"Failed to request GPIO for pin 0x%04X, err %ld\n",
+			pin, PTR_ERR(desc));
+		return AE_OK;
+	}
+
+	ret = gpiochip_lock_as_irq(chip, pin);
+	if (ret) {
+		dev_err(chip->parent,
+			"Failed to lock GPIO pin 0x%04X as interrupt, err %d\n",
+			pin, ret);
+		goto fail_free_desc;
+	}
+
+	irq = gpiod_to_irq(desc);
+	if (irq < 0) {
+		dev_err(chip->parent,
+			"Failed to translate GPIO pin 0x%04X to IRQ, err %d\n",
+			pin, irq);
+		goto fail_unlock_irq;
+	}
+
+	event = kzalloc(sizeof(*event), GFP_KERNEL);
+	if (!event)
+		goto fail_unlock_irq;
+
+	event->irqflags = IRQF_ONESHOT;
+	if (agpio->triggering == ACPI_LEVEL_SENSITIVE) {
+		if (agpio->polarity == ACPI_ACTIVE_HIGH)
+			event->irqflags |= IRQF_TRIGGER_HIGH;
+		else
+			event->irqflags |= IRQF_TRIGGER_LOW;
+	} else {
+		switch (agpio->polarity) {
+		case ACPI_ACTIVE_HIGH:
+			event->irqflags |= IRQF_TRIGGER_RISING;
+			break;
+		case ACPI_ACTIVE_LOW:
+			event->irqflags |= IRQF_TRIGGER_FALLING;
+			break;
+		default:
+			event->irqflags |= IRQF_TRIGGER_RISING |
+					   IRQF_TRIGGER_FALLING;
+			break;
+		}
+	}
+
+	event->handle = evt_handle;
+	event->handler = handler;
+	event->irq = irq;
+	event->irq_is_wake = acpi_gpio_irq_is_wake(chip->parent, agpio);
+	event->pin = pin;
+	event->desc = desc;
+
+	list_add_tail(&event->node, &acpi_gpio->events);
+
+	return AE_OK;
+
+fail_unlock_irq:
+	gpiochip_unlock_as_irq(chip, pin);
+fail_free_desc:
+	gpiochip_free_own_desc(desc);
+
+	return AE_OK;
+}
+
+/**
+ * acpi_gpiochip_request_interrupts() - Register isr for gpio chip ACPI events
+ * @chip:      GPIO chip
+ *
+ * ACPI5 platforms can use GPIO signaled ACPI events. These GPIO interrupts are
+ * handled by ACPI event methods which need to be called from the GPIO
+ * chip's interrupt handler. acpi_gpiochip_request_interrupts() finds out which
+ * GPIO pins have ACPI event methods and assigns interrupt handlers that calls
+ * the ACPI event methods for those pins.
+ */
+void acpi_gpiochip_request_interrupts(struct gpio_chip *chip)
+{
+	struct acpi_gpio_chip *acpi_gpio;
+	acpi_handle handle;
+	acpi_status status;
+	bool defer;
+
+	if (!chip->parent || !chip->to_irq)
+		return;
+
+	handle = ACPI_HANDLE(chip->parent);
+	if (!handle)
+		return;
+
+	status = acpi_get_data(handle, acpi_gpio_chip_dh, (void **)&acpi_gpio);
+	if (ACPI_FAILURE(status))
+		return;
+
+	acpi_walk_resources(handle, "_AEI",
+			    acpi_gpiochip_alloc_event, acpi_gpio);
+
+	mutex_lock(&acpi_gpio_deferred_req_irqs_lock);
+	defer = !acpi_gpio_deferred_req_irqs_done;
+	if (defer)
+		list_add(&acpi_gpio->deferred_req_irqs_list_entry,
+			 &acpi_gpio_deferred_req_irqs_list);
+	mutex_unlock(&acpi_gpio_deferred_req_irqs_lock);
+
+	if (defer)
+		return;
+
+	acpi_gpiochip_request_irqs(acpi_gpio);
+}
+EXPORT_SYMBOL_GPL(acpi_gpiochip_request_interrupts);
+
+/**
+ * acpi_gpiochip_free_interrupts() - Free GPIO ACPI event interrupts.
+ * @chip:      GPIO chip
+ *
+ * Free interrupts associated with GPIO ACPI event method for the given
+ * GPIO chip.
+ */
+void acpi_gpiochip_free_interrupts(struct gpio_chip *chip)
+{
+	struct acpi_gpio_chip *acpi_gpio;
+	struct acpi_gpio_event *event, *ep;
+	acpi_handle handle;
+	acpi_status status;
+
+	if (!chip->parent || !chip->to_irq)
+		return;
+
+	handle = ACPI_HANDLE(chip->parent);
+	if (!handle)
+		return;
+
+	status = acpi_get_data(handle, acpi_gpio_chip_dh, (void **)&acpi_gpio);
+	if (ACPI_FAILURE(status))
+		return;
+
+	mutex_lock(&acpi_gpio_deferred_req_irqs_lock);
+	if (!list_empty(&acpi_gpio->deferred_req_irqs_list_entry))
+		list_del_init(&acpi_gpio->deferred_req_irqs_list_entry);
+	mutex_unlock(&acpi_gpio_deferred_req_irqs_lock);
+
+	list_for_each_entry_safe_reverse(event, ep, &acpi_gpio->events, node) {
+		if (event->irq_requested) {
+			if (event->irq_is_wake)
+				disable_irq_wake(event->irq);
+
+			free_irq(event->irq, event);
+		}
+
+		gpiochip_unlock_as_irq(chip, event->pin);
+		gpiochip_free_own_desc(event->desc);
+		list_del(&event->node);
+		kfree(event);
+	}
+}
+EXPORT_SYMBOL_GPL(acpi_gpiochip_free_interrupts);
+
+int acpi_dev_add_driver_gpios(struct acpi_device *adev,
+			      const struct acpi_gpio_mapping *gpios)
+{
+	if (adev && gpios) {
+		adev->driver_gpios = gpios;
+		return 0;
+	}
+	return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_add_driver_gpios);
+
+void acpi_dev_remove_driver_gpios(struct acpi_device *adev)
+{
+	if (adev)
+		adev->driver_gpios = NULL;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_remove_driver_gpios);
+
+static void devm_acpi_dev_release_driver_gpios(struct device *dev, void *res)
+{
+	acpi_dev_remove_driver_gpios(ACPI_COMPANION(dev));
+}
+
+int devm_acpi_dev_add_driver_gpios(struct device *dev,
+				   const struct acpi_gpio_mapping *gpios)
+{
+	void *res;
+	int ret;
+
+	res = devres_alloc(devm_acpi_dev_release_driver_gpios, 0, GFP_KERNEL);
+	if (!res)
+		return -ENOMEM;
+
+	ret = acpi_dev_add_driver_gpios(ACPI_COMPANION(dev), gpios);
+	if (ret) {
+		devres_free(res);
+		return ret;
+	}
+	devres_add(dev, res);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(devm_acpi_dev_add_driver_gpios);
+
+void devm_acpi_dev_remove_driver_gpios(struct device *dev)
+{
+	WARN_ON(devres_release(dev, devm_acpi_dev_release_driver_gpios, NULL, NULL));
+}
+EXPORT_SYMBOL_GPL(devm_acpi_dev_remove_driver_gpios);
+
+static bool acpi_get_driver_gpio_data(struct acpi_device *adev,
+				      const char *name, int index,
+				      struct fwnode_reference_args *args,
+				      unsigned int *quirks)
+{
+	const struct acpi_gpio_mapping *gm;
+
+	if (!adev->driver_gpios)
+		return false;
+
+	for (gm = adev->driver_gpios; gm->name; gm++)
+		if (!strcmp(name, gm->name) && gm->data && index < gm->size) {
+			const struct acpi_gpio_params *par = gm->data + index;
+
+			args->fwnode = acpi_fwnode_handle(adev);
+			args->args[0] = par->crs_entry_index;
+			args->args[1] = par->line_index;
+			args->args[2] = par->active_low;
+			args->nargs = 3;
+
+			*quirks = gm->quirks;
+			return true;
+		}
+
+	return false;
+}
+
+static enum gpiod_flags
+acpi_gpio_to_gpiod_flags(const struct acpi_resource_gpio *agpio)
+{
+	switch (agpio->io_restriction) {
+	case ACPI_IO_RESTRICT_INPUT:
+		return GPIOD_IN;
+	case ACPI_IO_RESTRICT_OUTPUT:
+		/*
+		 * ACPI GPIO resources don't contain an initial value for the
+		 * GPIO. Therefore we deduce that value from the pull field
+		 * instead. If the pin is pulled up we assume default to be
+		 * high, if it is pulled down we assume default to be low,
+		 * otherwise we leave pin untouched.
+		 */
+		switch (agpio->pin_config) {
+		case ACPI_PIN_CONFIG_PULLUP:
+			return GPIOD_OUT_HIGH;
+		case ACPI_PIN_CONFIG_PULLDOWN:
+			return GPIOD_OUT_LOW;
+		default:
+			break;
+		}
+	default:
+		break;
+	}
+
+	/*
+	 * Assume that the BIOS has configured the direction and pull
+	 * accordingly.
+	 */
+	return GPIOD_ASIS;
+}
+
+static int
+__acpi_gpio_update_gpiod_flags(enum gpiod_flags *flags, enum gpiod_flags update)
+{
+	const enum gpiod_flags mask =
+		GPIOD_FLAGS_BIT_DIR_SET | GPIOD_FLAGS_BIT_DIR_OUT |
+		GPIOD_FLAGS_BIT_DIR_VAL;
+	int ret = 0;
+
+	/*
+	 * Check if the BIOS has IoRestriction with explicitly set direction
+	 * and update @flags accordingly. Otherwise use whatever caller asked
+	 * for.
+	 */
+	if (update & GPIOD_FLAGS_BIT_DIR_SET) {
+		enum gpiod_flags diff = *flags ^ update;
+
+		/*
+		 * Check if caller supplied incompatible GPIO initialization
+		 * flags.
+		 *
+		 * Return %-EINVAL to notify that firmware has different
+		 * settings and we are going to use them.
+		 */
+		if (((*flags & GPIOD_FLAGS_BIT_DIR_SET) && (diff & GPIOD_FLAGS_BIT_DIR_OUT)) ||
+		    ((*flags & GPIOD_FLAGS_BIT_DIR_OUT) && (diff & GPIOD_FLAGS_BIT_DIR_VAL)))
+			ret = -EINVAL;
+		*flags = (*flags & ~mask) | (update & mask);
+	}
+	return ret;
+}
+
+int
+acpi_gpio_update_gpiod_flags(enum gpiod_flags *flags, struct acpi_gpio_info *info)
+{
+	struct device *dev = &info->adev->dev;
+	enum gpiod_flags old = *flags;
+	int ret;
+
+	ret = __acpi_gpio_update_gpiod_flags(&old, info->flags);
+	if (info->quirks & ACPI_GPIO_QUIRK_NO_IO_RESTRICTION) {
+		if (ret)
+			dev_warn(dev, FW_BUG "GPIO not in correct mode, fixing\n");
+	} else {
+		if (ret)
+			dev_dbg(dev, "Override GPIO initialization flags\n");
+		*flags = old;
+	}
+
+	return ret;
+}
+
+int acpi_gpio_update_gpiod_lookup_flags(unsigned long *lookupflags,
+					struct acpi_gpio_info *info)
+{
+	switch (info->pin_config) {
+	case ACPI_PIN_CONFIG_PULLUP:
+		*lookupflags |= GPIO_PULL_UP;
+		break;
+	case ACPI_PIN_CONFIG_PULLDOWN:
+		*lookupflags |= GPIO_PULL_DOWN;
+		break;
+	default:
+		break;
+	}
+
+	if (info->polarity == GPIO_ACTIVE_LOW)
+		*lookupflags |= GPIO_ACTIVE_LOW;
+
+	return 0;
+}
+
+struct acpi_gpio_lookup {
+	struct acpi_gpio_info info;
+	int index;
+	int pin_index;
+	bool active_low;
+	struct gpio_desc *desc;
+	int n;
+};
+
+static int acpi_populate_gpio_lookup(struct acpi_resource *ares, void *data)
+{
+	struct acpi_gpio_lookup *lookup = data;
+
+	if (ares->type != ACPI_RESOURCE_TYPE_GPIO)
+		return 1;
+
+	if (!lookup->desc) {
+		const struct acpi_resource_gpio *agpio = &ares->data.gpio;
+		bool gpioint = agpio->connection_type == ACPI_RESOURCE_GPIO_TYPE_INT;
+		struct gpio_desc *desc;
+		int pin_index;
+
+		if (lookup->info.quirks & ACPI_GPIO_QUIRK_ONLY_GPIOIO && gpioint)
+			lookup->index++;
+
+		if (lookup->n++ != lookup->index)
+			return 1;
+
+		pin_index = lookup->pin_index;
+		if (pin_index >= agpio->pin_table_length)
+			return 1;
+
+		if (lookup->info.quirks & ACPI_GPIO_QUIRK_ABSOLUTE_NUMBER)
+			desc = gpio_to_desc(agpio->pin_table[pin_index]);
+		else
+			desc = acpi_get_gpiod(agpio->resource_source.string_ptr,
+					      agpio->pin_table[pin_index]);
+		lookup->desc = desc;
+		lookup->info.pin_config = agpio->pin_config;
+		lookup->info.gpioint = gpioint;
+
+		/*
+		 * Polarity and triggering are only specified for GpioInt
+		 * resource.
+		 * Note: we expect here:
+		 * - ACPI_ACTIVE_LOW == GPIO_ACTIVE_LOW
+		 * - ACPI_ACTIVE_HIGH == GPIO_ACTIVE_HIGH
+		 */
+		if (lookup->info.gpioint) {
+			lookup->info.flags = GPIOD_IN;
+			lookup->info.polarity = agpio->polarity;
+			lookup->info.triggering = agpio->triggering;
+		} else {
+			lookup->info.flags = acpi_gpio_to_gpiod_flags(agpio);
+			lookup->info.polarity = lookup->active_low;
+		}
+	}
+
+	return 1;
+}
+
+static int acpi_gpio_resource_lookup(struct acpi_gpio_lookup *lookup,
+				     struct acpi_gpio_info *info)
+{
+	struct acpi_device *adev = lookup->info.adev;
+	struct list_head res_list;
+	int ret;
+
+	INIT_LIST_HEAD(&res_list);
+
+	ret = acpi_dev_get_resources(adev, &res_list,
+				     acpi_populate_gpio_lookup,
+				     lookup);
+	if (ret < 0)
+		return ret;
+
+	acpi_dev_free_resource_list(&res_list);
+
+	if (!lookup->desc)
+		return -ENOENT;
+
+	if (info)
+		*info = lookup->info;
+	return 0;
+}
+
+static int acpi_gpio_property_lookup(struct fwnode_handle *fwnode,
+				     const char *propname, int index,
+				     struct acpi_gpio_lookup *lookup)
+{
+	struct fwnode_reference_args args;
+	unsigned int quirks = 0;
+	int ret;
+
+	memset(&args, 0, sizeof(args));
+	ret = __acpi_node_get_property_reference(fwnode, propname, index, 3,
+						 &args);
+	if (ret) {
+		struct acpi_device *adev = to_acpi_device_node(fwnode);
+
+		if (!adev)
+			return ret;
+
+		if (!acpi_get_driver_gpio_data(adev, propname, index, &args,
+					       &quirks))
+			return ret;
+	}
+	/*
+	 * The property was found and resolved, so need to lookup the GPIO based
+	 * on returned args.
+	 */
+	if (!to_acpi_device_node(args.fwnode))
+		return -EINVAL;
+	if (args.nargs != 3)
+		return -EPROTO;
+
+	lookup->index = args.args[0];
+	lookup->pin_index = args.args[1];
+	lookup->active_low = !!args.args[2];
+
+	lookup->info.adev = to_acpi_device_node(args.fwnode);
+	lookup->info.quirks = quirks;
+
+	return 0;
+}
+
+/**
+ * acpi_get_gpiod_by_index() - get a GPIO descriptor from device resources
+ * @adev: pointer to a ACPI device to get GPIO from
+ * @propname: Property name of the GPIO (optional)
+ * @index: index of GpioIo/GpioInt resource (starting from %0)
+ * @info: info pointer to fill in (optional)
+ *
+ * Function goes through ACPI resources for @adev and based on @index looks
+ * up a GpioIo/GpioInt resource, translates it to the Linux GPIO descriptor,
+ * and returns it. @index matches GpioIo/GpioInt resources only so if there
+ * are total %3 GPIO resources, the index goes from %0 to %2.
+ *
+ * If @propname is specified the GPIO is looked using device property. In
+ * that case @index is used to select the GPIO entry in the property value
+ * (in case of multiple).
+ *
+ * If the GPIO cannot be translated or there is an error, an ERR_PTR is
+ * returned.
+ *
+ * Note: if the GPIO resource has multiple entries in the pin list, this
+ * function only returns the first.
+ */
+static struct gpio_desc *acpi_get_gpiod_by_index(struct acpi_device *adev,
+					  const char *propname, int index,
+					  struct acpi_gpio_info *info)
+{
+	struct acpi_gpio_lookup lookup;
+	int ret;
+
+	if (!adev)
+		return ERR_PTR(-ENODEV);
+
+	memset(&lookup, 0, sizeof(lookup));
+	lookup.index = index;
+
+	if (propname) {
+		dev_dbg(&adev->dev, "GPIO: looking up %s\n", propname);
+
+		ret = acpi_gpio_property_lookup(acpi_fwnode_handle(adev),
+						propname, index, &lookup);
+		if (ret)
+			return ERR_PTR(ret);
+
+		dev_dbg(&adev->dev, "GPIO: _DSD returned %s %d %d %u\n",
+			dev_name(&lookup.info.adev->dev), lookup.index,
+			lookup.pin_index, lookup.active_low);
+	} else {
+		dev_dbg(&adev->dev, "GPIO: looking up %d in _CRS\n", index);
+		lookup.info.adev = adev;
+	}
+
+	ret = acpi_gpio_resource_lookup(&lookup, info);
+	return ret ? ERR_PTR(ret) : lookup.desc;
+}
+
+static bool acpi_can_fallback_to_crs(struct acpi_device *adev,
+				     const char *con_id)
+{
+	/* Never allow fallback if the device has properties */
+	if (acpi_dev_has_props(adev) || adev->driver_gpios)
+		return false;
+
+	return con_id == NULL;
+}
+
+struct gpio_desc *acpi_find_gpio(struct device *dev,
+				 const char *con_id,
+				 unsigned int idx,
+				 enum gpiod_flags *dflags,
+				 unsigned long *lookupflags)
+{
+	struct acpi_device *adev = ACPI_COMPANION(dev);
+	struct acpi_gpio_info info;
+	struct gpio_desc *desc;
+	char propname[32];
+	int i;
+
+	/* Try first from _DSD */
+	for (i = 0; i < ARRAY_SIZE(gpio_suffixes); i++) {
+		if (con_id) {
+			snprintf(propname, sizeof(propname), "%s-%s",
+				 con_id, gpio_suffixes[i]);
+		} else {
+			snprintf(propname, sizeof(propname), "%s",
+				 gpio_suffixes[i]);
+		}
+
+		desc = acpi_get_gpiod_by_index(adev, propname, idx, &info);
+		if (!IS_ERR(desc))
+			break;
+		if (PTR_ERR(desc) == -EPROBE_DEFER)
+			return ERR_CAST(desc);
+	}
+
+	/* Then from plain _CRS GPIOs */
+	if (IS_ERR(desc)) {
+		if (!acpi_can_fallback_to_crs(adev, con_id))
+			return ERR_PTR(-ENOENT);
+
+		desc = acpi_get_gpiod_by_index(adev, NULL, idx, &info);
+		if (IS_ERR(desc))
+			return desc;
+	}
+
+	if (info.gpioint &&
+	    (*dflags == GPIOD_OUT_LOW || *dflags == GPIOD_OUT_HIGH)) {
+		dev_dbg(dev, "refusing GpioInt() entry when doing GPIOD_OUT_* lookup\n");
+		return ERR_PTR(-ENOENT);
+	}
+
+	acpi_gpio_update_gpiod_flags(dflags, &info);
+	acpi_gpio_update_gpiod_lookup_flags(lookupflags, &info);
+	return desc;
+}
+
+/**
+ * acpi_node_get_gpiod() - get a GPIO descriptor from ACPI resources
+ * @fwnode: pointer to an ACPI firmware node to get the GPIO information from
+ * @propname: Property name of the GPIO
+ * @index: index of GpioIo/GpioInt resource (starting from %0)
+ * @info: info pointer to fill in (optional)
+ *
+ * If @fwnode is an ACPI device object, call acpi_get_gpiod_by_index() for it.
+ * Otherwise (i.e. it is a data-only non-device object), use the property-based
+ * GPIO lookup to get to the GPIO resource with the relevant information and use
+ * that to obtain the GPIO descriptor to return.
+ *
+ * If the GPIO cannot be translated or there is an error an ERR_PTR is
+ * returned.
+ */
+struct gpio_desc *acpi_node_get_gpiod(struct fwnode_handle *fwnode,
+				      const char *propname, int index,
+				      struct acpi_gpio_info *info)
+{
+	struct acpi_gpio_lookup lookup;
+	struct acpi_device *adev;
+	int ret;
+
+	adev = to_acpi_device_node(fwnode);
+	if (adev)
+		return acpi_get_gpiod_by_index(adev, propname, index, info);
+
+	if (!is_acpi_data_node(fwnode))
+		return ERR_PTR(-ENODEV);
+
+	if (!propname)
+		return ERR_PTR(-EINVAL);
+
+	memset(&lookup, 0, sizeof(lookup));
+	lookup.index = index;
+
+	ret = acpi_gpio_property_lookup(fwnode, propname, index, &lookup);
+	if (ret)
+		return ERR_PTR(ret);
+
+	ret = acpi_gpio_resource_lookup(&lookup, info);
+	return ret ? ERR_PTR(ret) : lookup.desc;
+}
+
+/**
+ * acpi_dev_gpio_irq_get_by() - Find GpioInt and translate it to Linux IRQ number
+ * @adev: pointer to a ACPI device to get IRQ from
+ * @name: optional name of GpioInt resource
+ * @index: index of GpioInt resource (starting from %0)
+ *
+ * If the device has one or more GpioInt resources, this function can be
+ * used to translate from the GPIO offset in the resource to the Linux IRQ
+ * number.
+ *
+ * The function is idempotent, though each time it runs it will configure GPIO
+ * pin direction according to the flags in GpioInt resource.
+ *
+ * The function takes optional @name parameter. If the resource has a property
+ * name, then only those will be taken into account.
+ *
+ * Return: Linux IRQ number (> %0) on success, negative errno on failure.
+ */
+int acpi_dev_gpio_irq_get_by(struct acpi_device *adev, const char *name, int index)
+{
+	int idx, i;
+	unsigned int irq_flags;
+	int ret;
+
+	for (i = 0, idx = 0; idx <= index; i++) {
+		struct acpi_gpio_info info;
+		struct gpio_desc *desc;
+
+		desc = acpi_get_gpiod_by_index(adev, name, i, &info);
+
+		/* Ignore -EPROBE_DEFER, it only matters if idx matches */
+		if (IS_ERR(desc) && PTR_ERR(desc) != -EPROBE_DEFER)
+			return PTR_ERR(desc);
+
+		if (info.gpioint && idx++ == index) {
+			unsigned long lflags = GPIO_LOOKUP_FLAGS_DEFAULT;
+			char label[32];
+			int irq;
+
+			if (IS_ERR(desc))
+				return PTR_ERR(desc);
+
+			irq = gpiod_to_irq(desc);
+			if (irq < 0)
+				return irq;
+
+			snprintf(label, sizeof(label), "GpioInt() %d", index);
+			ret = gpiod_configure_flags(desc, label, lflags, info.flags);
+			if (ret < 0)
+				return ret;
+
+			irq_flags = acpi_dev_get_irq_type(info.triggering,
+							  info.polarity);
+
+			/*
+			 * If the IRQ is not already in use then set type
+			 * if specified and different than the current one.
+			 */
+			if (can_request_irq(irq, irq_flags)) {
+				if (irq_flags != IRQ_TYPE_NONE &&
+				    irq_flags != irq_get_trigger_type(irq))
+					irq_set_irq_type(irq, irq_flags);
+			} else {
+				dev_dbg(&adev->dev, "IRQ %d already in use\n", irq);
+			}
+
+			return irq;
+		}
+
+	}
+	return -ENOENT;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_gpio_irq_get_by);
+
+static acpi_status
+acpi_gpio_adr_space_handler(u32 function, acpi_physical_address address,
+			    u32 bits, u64 *value, void *handler_context,
+			    void *region_context)
+{
+	struct acpi_gpio_chip *achip = region_context;
+	struct gpio_chip *chip = achip->chip;
+	struct acpi_resource_gpio *agpio;
+	struct acpi_resource *ares;
+	int pin_index = (int)address;
+	acpi_status status;
+	int length;
+	int i;
+
+	status = acpi_buffer_to_resource(achip->conn_info.connection,
+					 achip->conn_info.length, &ares);
+	if (ACPI_FAILURE(status))
+		return status;
+
+	if (WARN_ON(ares->type != ACPI_RESOURCE_TYPE_GPIO)) {
+		ACPI_FREE(ares);
+		return AE_BAD_PARAMETER;
+	}
+
+	agpio = &ares->data.gpio;
+
+	if (WARN_ON(agpio->io_restriction == ACPI_IO_RESTRICT_INPUT &&
+	    function == ACPI_WRITE)) {
+		ACPI_FREE(ares);
+		return AE_BAD_PARAMETER;
+	}
+
+	length = min(agpio->pin_table_length, (u16)(pin_index + bits));
+	for (i = pin_index; i < length; ++i) {
+		int pin = agpio->pin_table[i];
+		struct acpi_gpio_connection *conn;
+		struct gpio_desc *desc;
+		bool found;
+
+		mutex_lock(&achip->conn_lock);
+
+		found = false;
+		list_for_each_entry(conn, &achip->conns, node) {
+			if (conn->pin == pin) {
+				found = true;
+				desc = conn->desc;
+				break;
+			}
+		}
+
+		/*
+		 * The same GPIO can be shared between operation region and
+		 * event but only if the access here is ACPI_READ. In that
+		 * case we "borrow" the event GPIO instead.
+		 */
+		if (!found && agpio->shareable == ACPI_SHARED &&
+		     function == ACPI_READ) {
+			struct acpi_gpio_event *event;
+
+			list_for_each_entry(event, &achip->events, node) {
+				if (event->pin == pin) {
+					desc = event->desc;
+					found = true;
+					break;
+				}
+			}
+		}
+
+		if (!found) {
+			enum gpiod_flags flags = acpi_gpio_to_gpiod_flags(agpio);
+			const char *label = "ACPI:OpRegion";
+
+			desc = gpiochip_request_own_desc(chip, pin, label,
+							 GPIO_ACTIVE_HIGH,
+							 flags);
+			if (IS_ERR(desc)) {
+				status = AE_ERROR;
+				mutex_unlock(&achip->conn_lock);
+				goto out;
+			}
+
+			conn = kzalloc(sizeof(*conn), GFP_KERNEL);
+			if (!conn) {
+				status = AE_NO_MEMORY;
+				gpiochip_free_own_desc(desc);
+				mutex_unlock(&achip->conn_lock);
+				goto out;
+			}
+
+			conn->pin = pin;
+			conn->desc = desc;
+			list_add_tail(&conn->node, &achip->conns);
+		}
+
+		mutex_unlock(&achip->conn_lock);
+
+		if (function == ACPI_WRITE)
+			gpiod_set_raw_value_cansleep(desc,
+						     !!((1 << i) & *value));
+		else
+			*value |= (u64)gpiod_get_raw_value_cansleep(desc) << i;
+	}
+
+out:
+	ACPI_FREE(ares);
+	return status;
+}
+
+static void acpi_gpiochip_request_regions(struct acpi_gpio_chip *achip)
+{
+	struct gpio_chip *chip = achip->chip;
+	acpi_handle handle = ACPI_HANDLE(chip->parent);
+	acpi_status status;
+
+	INIT_LIST_HEAD(&achip->conns);
+	mutex_init(&achip->conn_lock);
+	status = acpi_install_address_space_handler(handle, ACPI_ADR_SPACE_GPIO,
+						    acpi_gpio_adr_space_handler,
+						    NULL, achip);
+	if (ACPI_FAILURE(status))
+		dev_err(chip->parent,
+		        "Failed to install GPIO OpRegion handler\n");
+}
+
+static void acpi_gpiochip_free_regions(struct acpi_gpio_chip *achip)
+{
+	struct gpio_chip *chip = achip->chip;
+	acpi_handle handle = ACPI_HANDLE(chip->parent);
+	struct acpi_gpio_connection *conn, *tmp;
+	acpi_status status;
+
+	status = acpi_remove_address_space_handler(handle, ACPI_ADR_SPACE_GPIO,
+						   acpi_gpio_adr_space_handler);
+	if (ACPI_FAILURE(status)) {
+		dev_err(chip->parent,
+			"Failed to remove GPIO OpRegion handler\n");
+		return;
+	}
+
+	list_for_each_entry_safe_reverse(conn, tmp, &achip->conns, node) {
+		gpiochip_free_own_desc(conn->desc);
+		list_del(&conn->node);
+		kfree(conn);
+	}
+}
+
+static struct gpio_desc *
+acpi_gpiochip_parse_own_gpio(struct acpi_gpio_chip *achip,
+			     struct fwnode_handle *fwnode,
+			     const char **name,
+			     unsigned long *lflags,
+			     enum gpiod_flags *dflags)
+{
+	struct gpio_chip *chip = achip->chip;
+	struct gpio_desc *desc;
+	u32 gpios[2];
+	int ret;
+
+	*lflags = GPIO_LOOKUP_FLAGS_DEFAULT;
+	*dflags = 0;
+	*name = NULL;
+
+	ret = fwnode_property_read_u32_array(fwnode, "gpios", gpios,
+					     ARRAY_SIZE(gpios));
+	if (ret < 0)
+		return ERR_PTR(ret);
+
+	desc = gpiochip_get_desc(chip, gpios[0]);
+	if (IS_ERR(desc))
+		return desc;
+
+	if (gpios[1])
+		*lflags |= GPIO_ACTIVE_LOW;
+
+	if (fwnode_property_present(fwnode, "input"))
+		*dflags |= GPIOD_IN;
+	else if (fwnode_property_present(fwnode, "output-low"))
+		*dflags |= GPIOD_OUT_LOW;
+	else if (fwnode_property_present(fwnode, "output-high"))
+		*dflags |= GPIOD_OUT_HIGH;
+	else
+		return ERR_PTR(-EINVAL);
+
+	fwnode_property_read_string(fwnode, "line-name", name);
+
+	return desc;
+}
+
+static void acpi_gpiochip_scan_gpios(struct acpi_gpio_chip *achip)
+{
+	struct gpio_chip *chip = achip->chip;
+	struct fwnode_handle *fwnode;
+
+	device_for_each_child_node(chip->parent, fwnode) {
+		unsigned long lflags;
+		enum gpiod_flags dflags;
+		struct gpio_desc *desc;
+		const char *name;
+		int ret;
+
+		if (!fwnode_property_present(fwnode, "gpio-hog"))
+			continue;
+
+		desc = acpi_gpiochip_parse_own_gpio(achip, fwnode, &name,
+						    &lflags, &dflags);
+		if (IS_ERR(desc))
+			continue;
+
+		ret = gpiod_hog(desc, name, lflags, dflags);
+		if (ret) {
+			dev_err(chip->parent, "Failed to hog GPIO\n");
+			fwnode_handle_put(fwnode);
+			return;
+		}
+	}
+}
+
+void acpi_gpiochip_add(struct gpio_chip *chip)
+{
+	struct acpi_gpio_chip *acpi_gpio;
+	acpi_handle handle;
+	acpi_status status;
+
+	if (!chip || !chip->parent)
+		return;
+
+	handle = ACPI_HANDLE(chip->parent);
+	if (!handle)
+		return;
+
+	acpi_gpio = kzalloc(sizeof(*acpi_gpio), GFP_KERNEL);
+	if (!acpi_gpio) {
+		dev_err(chip->parent,
+			"Failed to allocate memory for ACPI GPIO chip\n");
+		return;
+	}
+
+	acpi_gpio->chip = chip;
+	INIT_LIST_HEAD(&acpi_gpio->events);
+	INIT_LIST_HEAD(&acpi_gpio->deferred_req_irqs_list_entry);
+
+	status = acpi_attach_data(handle, acpi_gpio_chip_dh, acpi_gpio);
+	if (ACPI_FAILURE(status)) {
+		dev_err(chip->parent, "Failed to attach ACPI GPIO chip\n");
+		kfree(acpi_gpio);
+		return;
+	}
+
+	acpi_gpiochip_request_regions(acpi_gpio);
+	acpi_gpiochip_scan_gpios(acpi_gpio);
+	acpi_walk_dep_device_list(handle);
+}
+
+void acpi_gpiochip_remove(struct gpio_chip *chip)
+{
+	struct acpi_gpio_chip *acpi_gpio;
+	acpi_handle handle;
+	acpi_status status;
+
+	if (!chip || !chip->parent)
+		return;
+
+	handle = ACPI_HANDLE(chip->parent);
+	if (!handle)
+		return;
+
+	status = acpi_get_data(handle, acpi_gpio_chip_dh, (void **)&acpi_gpio);
+	if (ACPI_FAILURE(status)) {
+		dev_warn(chip->parent, "Failed to retrieve ACPI GPIO chip\n");
+		return;
+	}
+
+	acpi_gpiochip_free_regions(acpi_gpio);
+
+	acpi_detach_data(handle, acpi_gpio_chip_dh);
+	kfree(acpi_gpio);
+}
+
+static int acpi_gpio_package_count(const union acpi_object *obj)
+{
+	const union acpi_object *element = obj->package.elements;
+	const union acpi_object *end = element + obj->package.count;
+	unsigned int count = 0;
+
+	while (element < end) {
+		switch (element->type) {
+		case ACPI_TYPE_LOCAL_REFERENCE:
+			element += 3;
+			fallthrough;
+		case ACPI_TYPE_INTEGER:
+			element++;
+			count++;
+			break;
+
+		default:
+			return -EPROTO;
+		}
+	}
+
+	return count;
+}
+
+static int acpi_find_gpio_count(struct acpi_resource *ares, void *data)
+{
+	unsigned int *count = data;
+
+	if (ares->type == ACPI_RESOURCE_TYPE_GPIO)
+		*count += ares->data.gpio.pin_table_length;
+
+	return 1;
+}
+
+/**
+ * acpi_gpio_count - count the GPIOs associated with a device / function
+ * @dev:	GPIO consumer, can be %NULL for system-global GPIOs
+ * @con_id:	function within the GPIO consumer
+ *
+ * Return:
+ * The number of GPIOs associated with a device / function or %-ENOENT,
+ * if no GPIO has been assigned to the requested function.
+ */
+int acpi_gpio_count(struct device *dev, const char *con_id)
+{
+	struct acpi_device *adev = ACPI_COMPANION(dev);
+	const union acpi_object *obj;
+	const struct acpi_gpio_mapping *gm;
+	int count = -ENOENT;
+	int ret;
+	char propname[32];
+	unsigned int i;
+
+	/* Try first from _DSD */
+	for (i = 0; i < ARRAY_SIZE(gpio_suffixes); i++) {
+		if (con_id)
+			snprintf(propname, sizeof(propname), "%s-%s",
+				 con_id, gpio_suffixes[i]);
+		else
+			snprintf(propname, sizeof(propname), "%s",
+				 gpio_suffixes[i]);
+
+		ret = acpi_dev_get_property(adev, propname, ACPI_TYPE_ANY,
+					    &obj);
+		if (ret == 0) {
+			if (obj->type == ACPI_TYPE_LOCAL_REFERENCE)
+				count = 1;
+			else if (obj->type == ACPI_TYPE_PACKAGE)
+				count = acpi_gpio_package_count(obj);
+		} else if (adev->driver_gpios) {
+			for (gm = adev->driver_gpios; gm->name; gm++)
+				if (strcmp(propname, gm->name) == 0) {
+					count = gm->size;
+					break;
+				}
+		}
+		if (count > 0)
+			break;
+	}
+
+	/* Then from plain _CRS GPIOs */
+	if (count < 0) {
+		struct list_head resource_list;
+		unsigned int crs_count = 0;
+
+		if (!acpi_can_fallback_to_crs(adev, con_id))
+			return count;
+
+		INIT_LIST_HEAD(&resource_list);
+		acpi_dev_get_resources(adev, &resource_list,
+				       acpi_find_gpio_count, &crs_count);
+		acpi_dev_free_resource_list(&resource_list);
+		if (crs_count > 0)
+			count = crs_count;
+	}
+	return count ? count : -ENOENT;
+}
+
+/* Run deferred acpi_gpiochip_request_irqs() */
+static int __init acpi_gpio_handle_deferred_request_irqs(void)
+{
+	struct acpi_gpio_chip *acpi_gpio, *tmp;
+
+	mutex_lock(&acpi_gpio_deferred_req_irqs_lock);
+	list_for_each_entry_safe(acpi_gpio, tmp,
+				 &acpi_gpio_deferred_req_irqs_list,
+				 deferred_req_irqs_list_entry)
+		acpi_gpiochip_request_irqs(acpi_gpio);
+
+	acpi_gpio_deferred_req_irqs_done = true;
+	mutex_unlock(&acpi_gpio_deferred_req_irqs_lock);
+
+	return 0;
+}
+/* We must use _sync so that this runs after the first deferred_probe run */
+late_initcall_sync(acpi_gpio_handle_deferred_request_irqs);
+
+static const struct dmi_system_id gpiolib_acpi_quirks[] __initconst = {
+	{
+		/*
+		 * The Minix Neo Z83-4 has a micro-USB-B id-pin handler for
+		 * a non existing micro-USB-B connector which puts the HDMI
+		 * DDC pins in GPIO mode, breaking HDMI support.
+		 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "MINIX"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Z83-4"),
+		},
+		.driver_data = &(struct acpi_gpiolib_dmi_quirk) {
+			.no_edge_events_on_boot = true,
+		},
+	},
+	{
+		/*
+		 * The Terra Pad 1061 has a micro-USB-B id-pin handler, which
+		 * instead of controlling the actual micro-USB-B turns the 5V
+		 * boost for its USB-A connector off. The actual micro-USB-B
+		 * connector is wired for charging only.
+		 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Wortmann_AG"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "TERRA_PAD_1061"),
+		},
+		.driver_data = &(struct acpi_gpiolib_dmi_quirk) {
+			.no_edge_events_on_boot = true,
+		},
+	},
+	{
+		/*
+		 * The Dell Venue 10 Pro 5055, with Bay Trail SoC + TI PMIC uses an
+		 * external embedded-controller connected via I2C + an ACPI GPIO
+		 * event handler on INT33FFC:02 pin 12, causing spurious wakeups.
+		 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Venue 10 Pro 5055"),
+		},
+		.driver_data = &(struct acpi_gpiolib_dmi_quirk) {
+			.ignore_wake = "INT33FC:02@12",
+		},
+	},
+	{
+		/*
+		 * HP X2 10 models with Cherry Trail SoC + TI PMIC use an
+		 * external embedded-controller connected via I2C + an ACPI GPIO
+		 * event handler on INT33FF:01 pin 0, causing spurious wakeups.
+		 * When suspending by closing the LID, the power to the USB
+		 * keyboard is turned off, causing INT0002 ACPI events to
+		 * trigger once the XHCI controller notices the keyboard is
+		 * gone. So INT0002 events cause spurious wakeups too. Ignoring
+		 * EC wakes breaks wakeup when opening the lid, the user needs
+		 * to press the power-button to wakeup the system. The
+		 * alternative is suspend simply not working, which is worse.
+		 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "HP x2 Detachable 10-p0XX"),
+		},
+		.driver_data = &(struct acpi_gpiolib_dmi_quirk) {
+			.ignore_wake = "INT33FF:01@0,INT0002:00@2",
+		},
+	},
+	{
+		/*
+		 * HP X2 10 models with Bay Trail SoC + AXP288 PMIC use an
+		 * external embedded-controller connected via I2C + an ACPI GPIO
+		 * event handler on INT33FC:02 pin 28, causing spurious wakeups.
+		 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion x2 Detachable"),
+			DMI_MATCH(DMI_BOARD_NAME, "815D"),
+		},
+		.driver_data = &(struct acpi_gpiolib_dmi_quirk) {
+			.ignore_wake = "INT33FC:02@28",
+		},
+	},
+	{
+		/*
+		 * HP X2 10 models with Cherry Trail SoC + AXP288 PMIC use an
+		 * external embedded-controller connected via I2C + an ACPI GPIO
+		 * event handler on INT33FF:01 pin 0, causing spurious wakeups.
+		 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion x2 Detachable"),
+			DMI_MATCH(DMI_BOARD_NAME, "813E"),
+		},
+		.driver_data = &(struct acpi_gpiolib_dmi_quirk) {
+			.ignore_wake = "INT33FF:01@0",
+		},
+	},
+	{} /* Terminating entry */
+};
+
+static int __init acpi_gpio_setup_params(void)
+{
+	const struct acpi_gpiolib_dmi_quirk *quirk = NULL;
+	const struct dmi_system_id *id;
+
+	id = dmi_first_match(gpiolib_acpi_quirks);
+	if (id)
+		quirk = id->driver_data;
+
+	if (run_edge_events_on_boot < 0) {
+		if (quirk && quirk->no_edge_events_on_boot)
+			run_edge_events_on_boot = 0;
+		else
+			run_edge_events_on_boot = 1;
+	}
+
+	if (ignore_wake == NULL && quirk && quirk->ignore_wake)
+		ignore_wake = quirk->ignore_wake;
+
+	return 0;
+}
+
+/* Directly after dmi_setup() which runs as core_initcall() */
+postcore_initcall(acpi_gpio_setup_params);
diff --git a/drivers/gpio/gpiolib-acpi.h b/drivers/gpio/gpiolib-acpi.h
new file mode 100644
index 000000000..1c6d65cf0
--- /dev/null
+++ b/drivers/gpio/gpiolib-acpi.h
@@ -0,0 +1,96 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * ACPI helpers for GPIO API
+ *
+ * Copyright (C) 2012,2019 Intel Corporation
+ */
+
+#ifndef GPIOLIB_ACPI_H
+#define GPIOLIB_ACPI_H
+
+struct acpi_device;
+
+/**
+ * struct acpi_gpio_info - ACPI GPIO specific information
+ * @adev: reference to ACPI device which consumes GPIO resource
+ * @flags: GPIO initialization flags
+ * @gpioint: if %true this GPIO is of type GpioInt otherwise type is GpioIo
+ * @pin_config: pin bias as provided by ACPI
+ * @polarity: interrupt polarity as provided by ACPI
+ * @triggering: triggering type as provided by ACPI
+ * @quirks: Linux specific quirks as provided by struct acpi_gpio_mapping
+ */
+struct acpi_gpio_info {
+	struct acpi_device *adev;
+	enum gpiod_flags flags;
+	bool gpioint;
+	int pin_config;
+	int polarity;
+	int triggering;
+	unsigned int quirks;
+};
+
+#ifdef CONFIG_ACPI
+void acpi_gpiochip_add(struct gpio_chip *chip);
+void acpi_gpiochip_remove(struct gpio_chip *chip);
+
+void acpi_gpiochip_request_interrupts(struct gpio_chip *chip);
+void acpi_gpiochip_free_interrupts(struct gpio_chip *chip);
+
+int acpi_gpio_update_gpiod_flags(enum gpiod_flags *flags,
+				 struct acpi_gpio_info *info);
+int acpi_gpio_update_gpiod_lookup_flags(unsigned long *lookupflags,
+					struct acpi_gpio_info *info);
+
+struct gpio_desc *acpi_find_gpio(struct device *dev,
+				 const char *con_id,
+				 unsigned int idx,
+				 enum gpiod_flags *dflags,
+				 unsigned long *lookupflags);
+struct gpio_desc *acpi_node_get_gpiod(struct fwnode_handle *fwnode,
+				      const char *propname, int index,
+				      struct acpi_gpio_info *info);
+
+int acpi_gpio_count(struct device *dev, const char *con_id);
+#else
+static inline void acpi_gpiochip_add(struct gpio_chip *chip) { }
+static inline void acpi_gpiochip_remove(struct gpio_chip *chip) { }
+
+static inline void
+acpi_gpiochip_request_interrupts(struct gpio_chip *chip) { }
+
+static inline void
+acpi_gpiochip_free_interrupts(struct gpio_chip *chip) { }
+
+static inline int
+acpi_gpio_update_gpiod_flags(enum gpiod_flags *flags, struct acpi_gpio_info *info)
+{
+	return 0;
+}
+static inline int
+acpi_gpio_update_gpiod_lookup_flags(unsigned long *lookupflags,
+				    struct acpi_gpio_info *info)
+{
+	return 0;
+}
+
+static inline struct gpio_desc *
+acpi_find_gpio(struct device *dev, const char *con_id,
+	       unsigned int idx, enum gpiod_flags *dflags,
+	       unsigned long *lookupflags)
+{
+	return ERR_PTR(-ENOENT);
+}
+static inline struct gpio_desc *
+acpi_node_get_gpiod(struct fwnode_handle *fwnode, const char *propname,
+		    int index, struct acpi_gpio_info *info)
+{
+	return ERR_PTR(-ENXIO);
+}
+static inline int acpi_gpio_count(struct device *dev, const char *con_id)
+{
+	return -ENODEV;
+}
+#endif
+
+#endif /* GPIOLIB_ACPI_H */
diff --git a/drivers/gpio/gpiolib-cdev.c b/drivers/gpio/gpiolib-cdev.c
new file mode 100644
index 000000000..40d0196d8
--- /dev/null
+++ b/drivers/gpio/gpiolib-cdev.c
@@ -0,0 +1,2391 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/anon_inodes.h>
+#include <linux/atomic.h>
+#include <linux/bitmap.h>
+#include <linux/build_bug.h>
+#include <linux/cdev.h>
+#include <linux/compat.h>
+#include <linux/compiler.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/file.h>
+#include <linux/gpio.h>
+#include <linux/gpio/driver.h>
+#include <linux/interrupt.h>
+#include <linux/irqreturn.h>
+#include <linux/kernel.h>
+#include <linux/kfifo.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/poll.h>
+#include <linux/spinlock.h>
+#include <linux/timekeeping.h>
+#include <linux/uaccess.h>
+#include <linux/workqueue.h>
+#include <uapi/linux/gpio.h>
+
+#include "gpiolib.h"
+#include "gpiolib-cdev.h"
+
+/*
+ * Array sizes must ensure 64-bit alignment and not create holes in the
+ * struct packing.
+ */
+static_assert(IS_ALIGNED(GPIO_V2_LINES_MAX, 2));
+static_assert(IS_ALIGNED(GPIO_MAX_NAME_SIZE, 8));
+
+/*
+ * Check that uAPI structs are 64-bit aligned for 32/64-bit compatibility
+ */
+static_assert(IS_ALIGNED(sizeof(struct gpio_v2_line_attribute), 8));
+static_assert(IS_ALIGNED(sizeof(struct gpio_v2_line_config_attribute), 8));
+static_assert(IS_ALIGNED(sizeof(struct gpio_v2_line_config), 8));
+static_assert(IS_ALIGNED(sizeof(struct gpio_v2_line_request), 8));
+static_assert(IS_ALIGNED(sizeof(struct gpio_v2_line_info), 8));
+static_assert(IS_ALIGNED(sizeof(struct gpio_v2_line_info_changed), 8));
+static_assert(IS_ALIGNED(sizeof(struct gpio_v2_line_event), 8));
+static_assert(IS_ALIGNED(sizeof(struct gpio_v2_line_values), 8));
+
+/* Character device interface to GPIO.
+ *
+ * The GPIO character device, /dev/gpiochipN, provides userspace an
+ * interface to gpiolib GPIOs via ioctl()s.
+ */
+
+/*
+ * GPIO line handle management
+ */
+
+#ifdef CONFIG_GPIO_CDEV_V1
+/**
+ * struct linehandle_state - contains the state of a userspace handle
+ * @gdev: the GPIO device the handle pertains to
+ * @label: consumer label used to tag descriptors
+ * @descs: the GPIO descriptors held by this handle
+ * @num_descs: the number of descriptors held in the descs array
+ */
+struct linehandle_state {
+	struct gpio_device *gdev;
+	const char *label;
+	struct gpio_desc *descs[GPIOHANDLES_MAX];
+	u32 num_descs;
+};
+
+#define GPIOHANDLE_REQUEST_VALID_FLAGS \
+	(GPIOHANDLE_REQUEST_INPUT | \
+	GPIOHANDLE_REQUEST_OUTPUT | \
+	GPIOHANDLE_REQUEST_ACTIVE_LOW | \
+	GPIOHANDLE_REQUEST_BIAS_PULL_UP | \
+	GPIOHANDLE_REQUEST_BIAS_PULL_DOWN | \
+	GPIOHANDLE_REQUEST_BIAS_DISABLE | \
+	GPIOHANDLE_REQUEST_OPEN_DRAIN | \
+	GPIOHANDLE_REQUEST_OPEN_SOURCE)
+
+static int linehandle_validate_flags(u32 flags)
+{
+	/* Return an error if an unknown flag is set */
+	if (flags & ~GPIOHANDLE_REQUEST_VALID_FLAGS)
+		return -EINVAL;
+
+	/*
+	 * Do not allow both INPUT & OUTPUT flags to be set as they are
+	 * contradictory.
+	 */
+	if ((flags & GPIOHANDLE_REQUEST_INPUT) &&
+	    (flags & GPIOHANDLE_REQUEST_OUTPUT))
+		return -EINVAL;
+
+	/*
+	 * Do not allow OPEN_SOURCE & OPEN_DRAIN flags in a single request. If
+	 * the hardware actually supports enabling both at the same time the
+	 * electrical result would be disastrous.
+	 */
+	if ((flags & GPIOHANDLE_REQUEST_OPEN_DRAIN) &&
+	    (flags & GPIOHANDLE_REQUEST_OPEN_SOURCE))
+		return -EINVAL;
+
+	/* OPEN_DRAIN and OPEN_SOURCE flags only make sense for output mode. */
+	if (!(flags & GPIOHANDLE_REQUEST_OUTPUT) &&
+	    ((flags & GPIOHANDLE_REQUEST_OPEN_DRAIN) ||
+	     (flags & GPIOHANDLE_REQUEST_OPEN_SOURCE)))
+		return -EINVAL;
+
+	/* Bias flags only allowed for input or output mode. */
+	if (!((flags & GPIOHANDLE_REQUEST_INPUT) ||
+	      (flags & GPIOHANDLE_REQUEST_OUTPUT)) &&
+	    ((flags & GPIOHANDLE_REQUEST_BIAS_DISABLE) ||
+	     (flags & GPIOHANDLE_REQUEST_BIAS_PULL_UP) ||
+	     (flags & GPIOHANDLE_REQUEST_BIAS_PULL_DOWN)))
+		return -EINVAL;
+
+	/* Only one bias flag can be set. */
+	if (((flags & GPIOHANDLE_REQUEST_BIAS_DISABLE) &&
+	     (flags & (GPIOHANDLE_REQUEST_BIAS_PULL_DOWN |
+		       GPIOHANDLE_REQUEST_BIAS_PULL_UP))) ||
+	    ((flags & GPIOHANDLE_REQUEST_BIAS_PULL_DOWN) &&
+	     (flags & GPIOHANDLE_REQUEST_BIAS_PULL_UP)))
+		return -EINVAL;
+
+	return 0;
+}
+
+static void linehandle_flags_to_desc_flags(u32 lflags, unsigned long *flagsp)
+{
+	assign_bit(FLAG_ACTIVE_LOW, flagsp,
+		   lflags & GPIOHANDLE_REQUEST_ACTIVE_LOW);
+	assign_bit(FLAG_OPEN_DRAIN, flagsp,
+		   lflags & GPIOHANDLE_REQUEST_OPEN_DRAIN);
+	assign_bit(FLAG_OPEN_SOURCE, flagsp,
+		   lflags & GPIOHANDLE_REQUEST_OPEN_SOURCE);
+	assign_bit(FLAG_PULL_UP, flagsp,
+		   lflags & GPIOHANDLE_REQUEST_BIAS_PULL_UP);
+	assign_bit(FLAG_PULL_DOWN, flagsp,
+		   lflags & GPIOHANDLE_REQUEST_BIAS_PULL_DOWN);
+	assign_bit(FLAG_BIAS_DISABLE, flagsp,
+		   lflags & GPIOHANDLE_REQUEST_BIAS_DISABLE);
+}
+
+static long linehandle_set_config(struct linehandle_state *lh,
+				  void __user *ip)
+{
+	struct gpiohandle_config gcnf;
+	struct gpio_desc *desc;
+	int i, ret;
+	u32 lflags;
+
+	if (copy_from_user(&gcnf, ip, sizeof(gcnf)))
+		return -EFAULT;
+
+	lflags = gcnf.flags;
+	ret = linehandle_validate_flags(lflags);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < lh->num_descs; i++) {
+		desc = lh->descs[i];
+		linehandle_flags_to_desc_flags(gcnf.flags, &desc->flags);
+
+		/*
+		 * Lines have to be requested explicitly for input
+		 * or output, else the line will be treated "as is".
+		 */
+		if (lflags & GPIOHANDLE_REQUEST_OUTPUT) {
+			int val = !!gcnf.default_values[i];
+
+			ret = gpiod_direction_output(desc, val);
+			if (ret)
+				return ret;
+		} else if (lflags & GPIOHANDLE_REQUEST_INPUT) {
+			ret = gpiod_direction_input(desc);
+			if (ret)
+				return ret;
+		}
+
+		blocking_notifier_call_chain(&desc->gdev->notifier,
+					     GPIO_V2_LINE_CHANGED_CONFIG,
+					     desc);
+	}
+	return 0;
+}
+
+static long linehandle_ioctl(struct file *file, unsigned int cmd,
+			     unsigned long arg)
+{
+	struct linehandle_state *lh = file->private_data;
+	void __user *ip = (void __user *)arg;
+	struct gpiohandle_data ghd;
+	DECLARE_BITMAP(vals, GPIOHANDLES_MAX);
+	unsigned int i;
+	int ret;
+
+	if (!lh->gdev->chip)
+		return -ENODEV;
+
+	switch (cmd) {
+	case GPIOHANDLE_GET_LINE_VALUES_IOCTL:
+		/* NOTE: It's okay to read values of output lines */
+		ret = gpiod_get_array_value_complex(false, true,
+						    lh->num_descs, lh->descs,
+						    NULL, vals);
+		if (ret)
+			return ret;
+
+		memset(&ghd, 0, sizeof(ghd));
+		for (i = 0; i < lh->num_descs; i++)
+			ghd.values[i] = test_bit(i, vals);
+
+		if (copy_to_user(ip, &ghd, sizeof(ghd)))
+			return -EFAULT;
+
+		return 0;
+	case GPIOHANDLE_SET_LINE_VALUES_IOCTL:
+		/*
+		 * All line descriptors were created at once with the same
+		 * flags so just check if the first one is really output.
+		 */
+		if (!test_bit(FLAG_IS_OUT, &lh->descs[0]->flags))
+			return -EPERM;
+
+		if (copy_from_user(&ghd, ip, sizeof(ghd)))
+			return -EFAULT;
+
+		/* Clamp all values to [0,1] */
+		for (i = 0; i < lh->num_descs; i++)
+			__assign_bit(i, vals, ghd.values[i]);
+
+		/* Reuse the array setting function */
+		return gpiod_set_array_value_complex(false,
+						     true,
+						     lh->num_descs,
+						     lh->descs,
+						     NULL,
+						     vals);
+	case GPIOHANDLE_SET_CONFIG_IOCTL:
+		return linehandle_set_config(lh, ip);
+	default:
+		return -EINVAL;
+	}
+}
+
+#ifdef CONFIG_COMPAT
+static long linehandle_ioctl_compat(struct file *file, unsigned int cmd,
+				    unsigned long arg)
+{
+	return linehandle_ioctl(file, cmd, (unsigned long)compat_ptr(arg));
+}
+#endif
+
+static void linehandle_free(struct linehandle_state *lh)
+{
+	int i;
+
+	for (i = 0; i < lh->num_descs; i++)
+		if (lh->descs[i])
+			gpiod_free(lh->descs[i]);
+	kfree(lh->label);
+	put_device(&lh->gdev->dev);
+	kfree(lh);
+}
+
+static int linehandle_release(struct inode *inode, struct file *file)
+{
+	linehandle_free(file->private_data);
+	return 0;
+}
+
+static const struct file_operations linehandle_fileops = {
+	.release = linehandle_release,
+	.owner = THIS_MODULE,
+	.llseek = noop_llseek,
+	.unlocked_ioctl = linehandle_ioctl,
+#ifdef CONFIG_COMPAT
+	.compat_ioctl = linehandle_ioctl_compat,
+#endif
+};
+
+static int linehandle_create(struct gpio_device *gdev, void __user *ip)
+{
+	struct gpiohandle_request handlereq;
+	struct linehandle_state *lh;
+	struct file *file;
+	int fd, i, ret;
+	u32 lflags;
+
+	if (copy_from_user(&handlereq, ip, sizeof(handlereq)))
+		return -EFAULT;
+	if ((handlereq.lines == 0) || (handlereq.lines > GPIOHANDLES_MAX))
+		return -EINVAL;
+
+	lflags = handlereq.flags;
+
+	ret = linehandle_validate_flags(lflags);
+	if (ret)
+		return ret;
+
+	lh = kzalloc(sizeof(*lh), GFP_KERNEL);
+	if (!lh)
+		return -ENOMEM;
+	lh->gdev = gdev;
+	get_device(&gdev->dev);
+
+	if (handlereq.consumer_label[0] != '\0') {
+		/* label is only initialized if consumer_label is set */
+		lh->label = kstrndup(handlereq.consumer_label,
+				     sizeof(handlereq.consumer_label) - 1,
+				     GFP_KERNEL);
+		if (!lh->label) {
+			ret = -ENOMEM;
+			goto out_free_lh;
+		}
+	}
+
+	lh->num_descs = handlereq.lines;
+
+	/* Request each GPIO */
+	for (i = 0; i < handlereq.lines; i++) {
+		u32 offset = handlereq.lineoffsets[i];
+		struct gpio_desc *desc = gpiochip_get_desc(gdev->chip, offset);
+
+		if (IS_ERR(desc)) {
+			ret = PTR_ERR(desc);
+			goto out_free_lh;
+		}
+
+		ret = gpiod_request(desc, lh->label);
+		if (ret)
+			goto out_free_lh;
+		lh->descs[i] = desc;
+		linehandle_flags_to_desc_flags(handlereq.flags, &desc->flags);
+
+		ret = gpiod_set_transitory(desc, false);
+		if (ret < 0)
+			goto out_free_lh;
+
+		/*
+		 * Lines have to be requested explicitly for input
+		 * or output, else the line will be treated "as is".
+		 */
+		if (lflags & GPIOHANDLE_REQUEST_OUTPUT) {
+			int val = !!handlereq.default_values[i];
+
+			ret = gpiod_direction_output(desc, val);
+			if (ret)
+				goto out_free_lh;
+		} else if (lflags & GPIOHANDLE_REQUEST_INPUT) {
+			ret = gpiod_direction_input(desc);
+			if (ret)
+				goto out_free_lh;
+		}
+
+		blocking_notifier_call_chain(&desc->gdev->notifier,
+					     GPIO_V2_LINE_CHANGED_REQUESTED, desc);
+
+		dev_dbg(&gdev->dev, "registered chardev handle for line %d\n",
+			offset);
+	}
+
+	fd = get_unused_fd_flags(O_RDONLY | O_CLOEXEC);
+	if (fd < 0) {
+		ret = fd;
+		goto out_free_lh;
+	}
+
+	file = anon_inode_getfile("gpio-linehandle",
+				  &linehandle_fileops,
+				  lh,
+				  O_RDONLY | O_CLOEXEC);
+	if (IS_ERR(file)) {
+		ret = PTR_ERR(file);
+		goto out_put_unused_fd;
+	}
+
+	handlereq.fd = fd;
+	if (copy_to_user(ip, &handlereq, sizeof(handlereq))) {
+		/*
+		 * fput() will trigger the release() callback, so do not go onto
+		 * the regular error cleanup path here.
+		 */
+		fput(file);
+		put_unused_fd(fd);
+		return -EFAULT;
+	}
+
+	fd_install(fd, file);
+
+	dev_dbg(&gdev->dev, "registered chardev handle for %d lines\n",
+		lh->num_descs);
+
+	return 0;
+
+out_put_unused_fd:
+	put_unused_fd(fd);
+out_free_lh:
+	linehandle_free(lh);
+	return ret;
+}
+#endif /* CONFIG_GPIO_CDEV_V1 */
+
+/**
+ * struct line - contains the state of a requested line
+ * @desc: the GPIO descriptor for this line.
+ * @req: the corresponding line request
+ * @irq: the interrupt triggered in response to events on this GPIO
+ * @eflags: the edge flags, GPIO_V2_LINE_FLAG_EDGE_RISING and/or
+ * GPIO_V2_LINE_FLAG_EDGE_FALLING, indicating the edge detection applied
+ * @timestamp_ns: cache for the timestamp storing it between hardirq and
+ * IRQ thread, used to bring the timestamp close to the actual event
+ * @req_seqno: the seqno for the current edge event in the sequence of
+ * events for the corresponding line request. This is drawn from the @req.
+ * @line_seqno: the seqno for the current edge event in the sequence of
+ * events for this line.
+ * @work: the worker that implements software debouncing
+ * @sw_debounced: flag indicating if the software debouncer is active
+ * @level: the current debounced physical level of the line
+ */
+struct line {
+	struct gpio_desc *desc;
+	/*
+	 * -- edge detector specific fields --
+	 */
+	struct linereq *req;
+	unsigned int irq;
+	u64 eflags;
+	/*
+	 * timestamp_ns and req_seqno are accessed only by
+	 * edge_irq_handler() and edge_irq_thread(), which are themselves
+	 * mutually exclusive, so no additional protection is necessary.
+	 */
+	u64 timestamp_ns;
+	u32 req_seqno;
+	/*
+	 * line_seqno is accessed by either edge_irq_thread() or
+	 * debounce_work_func(), which are themselves mutually exclusive,
+	 * so no additional protection is necessary.
+	 */
+	u32 line_seqno;
+	/*
+	 * -- debouncer specific fields --
+	 */
+	struct delayed_work work;
+	/*
+	 * sw_debounce is accessed by linereq_set_config(), which is the
+	 * only setter, and linereq_get_values(), which can live with a
+	 * slightly stale value.
+	 */
+	unsigned int sw_debounced;
+	/*
+	 * level is accessed by debounce_work_func(), which is the only
+	 * setter, and linereq_get_values() which can live with a slightly
+	 * stale value.
+	 */
+	unsigned int level;
+};
+
+/**
+ * struct linereq - contains the state of a userspace line request
+ * @gdev: the GPIO device the line request pertains to
+ * @label: consumer label used to tag GPIO descriptors
+ * @num_lines: the number of lines in the lines array
+ * @wait: wait queue that handles blocking reads of events
+ * @event_buffer_size: the number of elements allocated in @events
+ * @events: KFIFO for the GPIO events
+ * @seqno: the sequence number for edge events generated on all lines in
+ * this line request.  Note that this is not used when @num_lines is 1, as
+ * the line_seqno is then the same and is cheaper to calculate.
+ * @config_mutex: mutex for serializing ioctl() calls to ensure consistency
+ * of configuration, particularly multi-step accesses to desc flags.
+ * @lines: the lines held by this line request, with @num_lines elements.
+ */
+struct linereq {
+	struct gpio_device *gdev;
+	const char *label;
+	u32 num_lines;
+	wait_queue_head_t wait;
+	u32 event_buffer_size;
+	DECLARE_KFIFO_PTR(events, struct gpio_v2_line_event);
+	atomic_t seqno;
+	struct mutex config_mutex;
+	struct line lines[];
+};
+
+#define GPIO_V2_LINE_BIAS_FLAGS \
+	(GPIO_V2_LINE_FLAG_BIAS_PULL_UP | \
+	 GPIO_V2_LINE_FLAG_BIAS_PULL_DOWN | \
+	 GPIO_V2_LINE_FLAG_BIAS_DISABLED)
+
+#define GPIO_V2_LINE_DIRECTION_FLAGS \
+	(GPIO_V2_LINE_FLAG_INPUT | \
+	 GPIO_V2_LINE_FLAG_OUTPUT)
+
+#define GPIO_V2_LINE_DRIVE_FLAGS \
+	(GPIO_V2_LINE_FLAG_OPEN_DRAIN | \
+	 GPIO_V2_LINE_FLAG_OPEN_SOURCE)
+
+#define GPIO_V2_LINE_EDGE_FLAGS \
+	(GPIO_V2_LINE_FLAG_EDGE_RISING | \
+	 GPIO_V2_LINE_FLAG_EDGE_FALLING)
+
+#define GPIO_V2_LINE_VALID_FLAGS \
+	(GPIO_V2_LINE_FLAG_ACTIVE_LOW | \
+	 GPIO_V2_LINE_DIRECTION_FLAGS | \
+	 GPIO_V2_LINE_DRIVE_FLAGS | \
+	 GPIO_V2_LINE_EDGE_FLAGS | \
+	 GPIO_V2_LINE_BIAS_FLAGS)
+
+static void linereq_put_event(struct linereq *lr,
+			      struct gpio_v2_line_event *le)
+{
+	bool overflow = false;
+
+	spin_lock(&lr->wait.lock);
+	if (kfifo_is_full(&lr->events)) {
+		overflow = true;
+		kfifo_skip(&lr->events);
+	}
+	kfifo_in(&lr->events, le, 1);
+	spin_unlock(&lr->wait.lock);
+	if (!overflow)
+		wake_up_poll(&lr->wait, EPOLLIN);
+	else
+		pr_debug_ratelimited("event FIFO is full - event dropped\n");
+}
+
+static irqreturn_t edge_irq_thread(int irq, void *p)
+{
+	struct line *line = p;
+	struct linereq *lr = line->req;
+	struct gpio_v2_line_event le;
+
+	/* Do not leak kernel stack to userspace */
+	memset(&le, 0, sizeof(le));
+
+	if (line->timestamp_ns) {
+		le.timestamp_ns = line->timestamp_ns;
+	} else {
+		/*
+		 * We may be running from a nested threaded interrupt in
+		 * which case we didn't get the timestamp from
+		 * edge_irq_handler().
+		 */
+		le.timestamp_ns = ktime_get_ns();
+		if (lr->num_lines != 1)
+			line->req_seqno = atomic_inc_return(&lr->seqno);
+	}
+	line->timestamp_ns = 0;
+
+	if (line->eflags == (GPIO_V2_LINE_FLAG_EDGE_RISING |
+			     GPIO_V2_LINE_FLAG_EDGE_FALLING)) {
+		int level = gpiod_get_value_cansleep(line->desc);
+
+		if (level)
+			/* Emit low-to-high event */
+			le.id = GPIO_V2_LINE_EVENT_RISING_EDGE;
+		else
+			/* Emit high-to-low event */
+			le.id = GPIO_V2_LINE_EVENT_FALLING_EDGE;
+	} else if (line->eflags == GPIO_V2_LINE_FLAG_EDGE_RISING) {
+		/* Emit low-to-high event */
+		le.id = GPIO_V2_LINE_EVENT_RISING_EDGE;
+	} else if (line->eflags == GPIO_V2_LINE_FLAG_EDGE_FALLING) {
+		/* Emit high-to-low event */
+		le.id = GPIO_V2_LINE_EVENT_FALLING_EDGE;
+	} else {
+		return IRQ_NONE;
+	}
+	line->line_seqno++;
+	le.line_seqno = line->line_seqno;
+	le.seqno = (lr->num_lines == 1) ? le.line_seqno : line->req_seqno;
+	le.offset = gpio_chip_hwgpio(line->desc);
+
+	linereq_put_event(lr, &le);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t edge_irq_handler(int irq, void *p)
+{
+	struct line *line = p;
+	struct linereq *lr = line->req;
+
+	/*
+	 * Just store the timestamp in hardirq context so we get it as
+	 * close in time as possible to the actual event.
+	 */
+	line->timestamp_ns = ktime_get_ns();
+
+	if (lr->num_lines != 1)
+		line->req_seqno = atomic_inc_return(&lr->seqno);
+
+	return IRQ_WAKE_THREAD;
+}
+
+/*
+ * returns the current debounced logical value.
+ */
+static bool debounced_value(struct line *line)
+{
+	bool value;
+
+	/*
+	 * minor race - debouncer may be stopped here, so edge_detector_stop()
+	 * must leave the value unchanged so the following will read the level
+	 * from when the debouncer was last running.
+	 */
+	value = READ_ONCE(line->level);
+
+	if (test_bit(FLAG_ACTIVE_LOW, &line->desc->flags))
+		value = !value;
+
+	return value;
+}
+
+static irqreturn_t debounce_irq_handler(int irq, void *p)
+{
+	struct line *line = p;
+
+	mod_delayed_work(system_wq, &line->work,
+		usecs_to_jiffies(READ_ONCE(line->desc->debounce_period_us)));
+
+	return IRQ_HANDLED;
+}
+
+static void debounce_work_func(struct work_struct *work)
+{
+	struct gpio_v2_line_event le;
+	struct line *line = container_of(work, struct line, work.work);
+	struct linereq *lr;
+	int level;
+
+	level = gpiod_get_raw_value_cansleep(line->desc);
+	if (level < 0) {
+		pr_debug_ratelimited("debouncer failed to read line value\n");
+		return;
+	}
+
+	if (READ_ONCE(line->level) == level)
+		return;
+
+	WRITE_ONCE(line->level, level);
+
+	/* -- edge detection -- */
+	if (!line->eflags)
+		return;
+
+	/* switch from physical level to logical - if they differ */
+	if (test_bit(FLAG_ACTIVE_LOW, &line->desc->flags))
+		level = !level;
+
+	/* ignore edges that are not being monitored */
+	if (((line->eflags == GPIO_V2_LINE_FLAG_EDGE_RISING) && !level) ||
+	    ((line->eflags == GPIO_V2_LINE_FLAG_EDGE_FALLING) && level))
+		return;
+
+	/* Do not leak kernel stack to userspace */
+	memset(&le, 0, sizeof(le));
+
+	lr = line->req;
+	le.timestamp_ns = ktime_get_ns();
+	le.offset = gpio_chip_hwgpio(line->desc);
+	line->line_seqno++;
+	le.line_seqno = line->line_seqno;
+	le.seqno = (lr->num_lines == 1) ?
+		le.line_seqno : atomic_inc_return(&lr->seqno);
+
+	if (level)
+		/* Emit low-to-high event */
+		le.id = GPIO_V2_LINE_EVENT_RISING_EDGE;
+	else
+		/* Emit high-to-low event */
+		le.id = GPIO_V2_LINE_EVENT_FALLING_EDGE;
+
+	linereq_put_event(lr, &le);
+}
+
+static int debounce_setup(struct line *line,
+			  unsigned int debounce_period_us)
+{
+	unsigned long irqflags;
+	int ret, level, irq;
+
+	/* try hardware */
+	ret = gpiod_set_debounce(line->desc, debounce_period_us);
+	if (!ret) {
+		WRITE_ONCE(line->desc->debounce_period_us, debounce_period_us);
+		return ret;
+	}
+	if (ret != -ENOTSUPP)
+		return ret;
+
+	if (debounce_period_us) {
+		/* setup software debounce */
+		level = gpiod_get_raw_value_cansleep(line->desc);
+		if (level < 0)
+			return level;
+
+		irq = gpiod_to_irq(line->desc);
+		if (irq < 0)
+			return -ENXIO;
+
+		WRITE_ONCE(line->level, level);
+		irqflags = IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING;
+		ret = request_irq(irq, debounce_irq_handler, irqflags,
+				  line->req->label, line);
+		if (ret)
+			return ret;
+
+		WRITE_ONCE(line->sw_debounced, 1);
+		line->irq = irq;
+	}
+	return 0;
+}
+
+static bool gpio_v2_line_config_debounced(struct gpio_v2_line_config *lc,
+					  unsigned int line_idx)
+{
+	unsigned int i;
+	u64 mask = BIT_ULL(line_idx);
+
+	for (i = 0; i < lc->num_attrs; i++) {
+		if ((lc->attrs[i].attr.id == GPIO_V2_LINE_ATTR_ID_DEBOUNCE) &&
+		    (lc->attrs[i].mask & mask))
+			return true;
+	}
+	return false;
+}
+
+static u32 gpio_v2_line_config_debounce_period(struct gpio_v2_line_config *lc,
+					       unsigned int line_idx)
+{
+	unsigned int i;
+	u64 mask = BIT_ULL(line_idx);
+
+	for (i = 0; i < lc->num_attrs; i++) {
+		if ((lc->attrs[i].attr.id == GPIO_V2_LINE_ATTR_ID_DEBOUNCE) &&
+		    (lc->attrs[i].mask & mask))
+			return lc->attrs[i].attr.debounce_period_us;
+	}
+	return 0;
+}
+
+static void edge_detector_stop(struct line *line)
+{
+	if (line->irq) {
+		free_irq(line->irq, line);
+		line->irq = 0;
+	}
+
+	cancel_delayed_work_sync(&line->work);
+	WRITE_ONCE(line->sw_debounced, 0);
+	line->eflags = 0;
+	if (line->desc)
+		WRITE_ONCE(line->desc->debounce_period_us, 0);
+	/* do not change line->level - see comment in debounced_value() */
+}
+
+static int edge_detector_setup(struct line *line,
+			       struct gpio_v2_line_config *lc,
+			       unsigned int line_idx,
+			       u64 eflags)
+{
+	u32 debounce_period_us;
+	unsigned long irqflags = 0;
+	int irq, ret;
+
+	if (eflags && !kfifo_initialized(&line->req->events)) {
+		ret = kfifo_alloc(&line->req->events,
+				  line->req->event_buffer_size, GFP_KERNEL);
+		if (ret)
+			return ret;
+	}
+	line->eflags = eflags;
+	if (gpio_v2_line_config_debounced(lc, line_idx)) {
+		debounce_period_us = gpio_v2_line_config_debounce_period(lc, line_idx);
+		ret = debounce_setup(line, debounce_period_us);
+		if (ret)
+			return ret;
+		WRITE_ONCE(line->desc->debounce_period_us, debounce_period_us);
+	}
+
+	/* detection disabled or sw debouncer will provide edge detection */
+	if (!eflags || READ_ONCE(line->sw_debounced))
+		return 0;
+
+	irq = gpiod_to_irq(line->desc);
+	if (irq < 0)
+		return -ENXIO;
+
+	if (eflags & GPIO_V2_LINE_FLAG_EDGE_RISING)
+		irqflags |= test_bit(FLAG_ACTIVE_LOW, &line->desc->flags) ?
+			IRQF_TRIGGER_FALLING : IRQF_TRIGGER_RISING;
+	if (eflags & GPIO_V2_LINE_FLAG_EDGE_FALLING)
+		irqflags |= test_bit(FLAG_ACTIVE_LOW, &line->desc->flags) ?
+			IRQF_TRIGGER_RISING : IRQF_TRIGGER_FALLING;
+	irqflags |= IRQF_ONESHOT;
+
+	/* Request a thread to read the events */
+	ret = request_threaded_irq(irq, edge_irq_handler, edge_irq_thread,
+				   irqflags, line->req->label, line);
+	if (ret)
+		return ret;
+
+	line->irq = irq;
+	return 0;
+}
+
+static int edge_detector_update(struct line *line,
+				struct gpio_v2_line_config *lc,
+				unsigned int line_idx,
+				u64 eflags, bool polarity_change)
+{
+	unsigned int debounce_period_us =
+		gpio_v2_line_config_debounce_period(lc, line_idx);
+
+	if ((line->eflags == eflags) && !polarity_change &&
+	    (READ_ONCE(line->desc->debounce_period_us) == debounce_period_us))
+		return 0;
+
+	/* sw debounced and still will be...*/
+	if (debounce_period_us && READ_ONCE(line->sw_debounced)) {
+		line->eflags = eflags;
+		WRITE_ONCE(line->desc->debounce_period_us, debounce_period_us);
+		return 0;
+	}
+
+	/* reconfiguring edge detection or sw debounce being disabled */
+	if ((line->irq && !READ_ONCE(line->sw_debounced)) ||
+	    (!debounce_period_us && READ_ONCE(line->sw_debounced)))
+		edge_detector_stop(line);
+
+	return edge_detector_setup(line, lc, line_idx, eflags);
+}
+
+static u64 gpio_v2_line_config_flags(struct gpio_v2_line_config *lc,
+				     unsigned int line_idx)
+{
+	unsigned int i;
+	u64 mask = BIT_ULL(line_idx);
+
+	for (i = 0; i < lc->num_attrs; i++) {
+		if ((lc->attrs[i].attr.id == GPIO_V2_LINE_ATTR_ID_FLAGS) &&
+		    (lc->attrs[i].mask & mask))
+			return lc->attrs[i].attr.flags;
+	}
+	return lc->flags;
+}
+
+static int gpio_v2_line_config_output_value(struct gpio_v2_line_config *lc,
+					    unsigned int line_idx)
+{
+	unsigned int i;
+	u64 mask = BIT_ULL(line_idx);
+
+	for (i = 0; i < lc->num_attrs; i++) {
+		if ((lc->attrs[i].attr.id == GPIO_V2_LINE_ATTR_ID_OUTPUT_VALUES) &&
+		    (lc->attrs[i].mask & mask))
+			return !!(lc->attrs[i].attr.values & mask);
+	}
+	return 0;
+}
+
+static int gpio_v2_line_flags_validate(u64 flags)
+{
+	/* Return an error if an unknown flag is set */
+	if (flags & ~GPIO_V2_LINE_VALID_FLAGS)
+		return -EINVAL;
+
+	/*
+	 * Do not allow both INPUT and OUTPUT flags to be set as they are
+	 * contradictory.
+	 */
+	if ((flags & GPIO_V2_LINE_FLAG_INPUT) &&
+	    (flags & GPIO_V2_LINE_FLAG_OUTPUT))
+		return -EINVAL;
+
+	/* Edge detection requires explicit input. */
+	if ((flags & GPIO_V2_LINE_EDGE_FLAGS) &&
+	    !(flags & GPIO_V2_LINE_FLAG_INPUT))
+		return -EINVAL;
+
+	/*
+	 * Do not allow OPEN_SOURCE and OPEN_DRAIN flags in a single
+	 * request. If the hardware actually supports enabling both at the
+	 * same time the electrical result would be disastrous.
+	 */
+	if ((flags & GPIO_V2_LINE_FLAG_OPEN_DRAIN) &&
+	    (flags & GPIO_V2_LINE_FLAG_OPEN_SOURCE))
+		return -EINVAL;
+
+	/* Drive requires explicit output direction. */
+	if ((flags & GPIO_V2_LINE_DRIVE_FLAGS) &&
+	    !(flags & GPIO_V2_LINE_FLAG_OUTPUT))
+		return -EINVAL;
+
+	/* Bias requires explicit direction. */
+	if ((flags & GPIO_V2_LINE_BIAS_FLAGS) &&
+	    !(flags & GPIO_V2_LINE_DIRECTION_FLAGS))
+		return -EINVAL;
+
+	/* Only one bias flag can be set. */
+	if (((flags & GPIO_V2_LINE_FLAG_BIAS_DISABLED) &&
+	     (flags & (GPIO_V2_LINE_FLAG_BIAS_PULL_DOWN |
+		       GPIO_V2_LINE_FLAG_BIAS_PULL_UP))) ||
+	    ((flags & GPIO_V2_LINE_FLAG_BIAS_PULL_DOWN) &&
+	     (flags & GPIO_V2_LINE_FLAG_BIAS_PULL_UP)))
+		return -EINVAL;
+
+	return 0;
+}
+
+static int gpio_v2_line_config_validate(struct gpio_v2_line_config *lc,
+					unsigned int num_lines)
+{
+	unsigned int i;
+	u64 flags;
+	int ret;
+
+	if (lc->num_attrs > GPIO_V2_LINE_NUM_ATTRS_MAX)
+		return -EINVAL;
+
+	if (memchr_inv(lc->padding, 0, sizeof(lc->padding)))
+		return -EINVAL;
+
+	for (i = 0; i < num_lines; i++) {
+		flags = gpio_v2_line_config_flags(lc, i);
+		ret = gpio_v2_line_flags_validate(flags);
+		if (ret)
+			return ret;
+
+		/* debounce requires explicit input */
+		if (gpio_v2_line_config_debounced(lc, i) &&
+		    !(flags & GPIO_V2_LINE_FLAG_INPUT))
+			return -EINVAL;
+	}
+	return 0;
+}
+
+static void gpio_v2_line_config_flags_to_desc_flags(u64 flags,
+						    unsigned long *flagsp)
+{
+	assign_bit(FLAG_ACTIVE_LOW, flagsp,
+		   flags & GPIO_V2_LINE_FLAG_ACTIVE_LOW);
+
+	if (flags & GPIO_V2_LINE_FLAG_OUTPUT)
+		set_bit(FLAG_IS_OUT, flagsp);
+	else if (flags & GPIO_V2_LINE_FLAG_INPUT)
+		clear_bit(FLAG_IS_OUT, flagsp);
+
+	assign_bit(FLAG_EDGE_RISING, flagsp,
+		   flags & GPIO_V2_LINE_FLAG_EDGE_RISING);
+	assign_bit(FLAG_EDGE_FALLING, flagsp,
+		   flags & GPIO_V2_LINE_FLAG_EDGE_FALLING);
+
+	assign_bit(FLAG_OPEN_DRAIN, flagsp,
+		   flags & GPIO_V2_LINE_FLAG_OPEN_DRAIN);
+	assign_bit(FLAG_OPEN_SOURCE, flagsp,
+		   flags & GPIO_V2_LINE_FLAG_OPEN_SOURCE);
+
+	assign_bit(FLAG_PULL_UP, flagsp,
+		   flags & GPIO_V2_LINE_FLAG_BIAS_PULL_UP);
+	assign_bit(FLAG_PULL_DOWN, flagsp,
+		   flags & GPIO_V2_LINE_FLAG_BIAS_PULL_DOWN);
+	assign_bit(FLAG_BIAS_DISABLE, flagsp,
+		   flags & GPIO_V2_LINE_FLAG_BIAS_DISABLED);
+}
+
+static long linereq_get_values(struct linereq *lr, void __user *ip)
+{
+	struct gpio_v2_line_values lv;
+	DECLARE_BITMAP(vals, GPIO_V2_LINES_MAX);
+	struct gpio_desc **descs;
+	unsigned int i, didx, num_get;
+	bool val;
+	int ret;
+
+	/* NOTE: It's ok to read values of output lines. */
+	if (copy_from_user(&lv, ip, sizeof(lv)))
+		return -EFAULT;
+
+	for (num_get = 0, i = 0; i < lr->num_lines; i++) {
+		if (lv.mask & BIT_ULL(i)) {
+			num_get++;
+			descs = &lr->lines[i].desc;
+		}
+	}
+
+	if (num_get == 0)
+		return -EINVAL;
+
+	if (num_get != 1) {
+		descs = kmalloc_array(num_get, sizeof(*descs), GFP_KERNEL);
+		if (!descs)
+			return -ENOMEM;
+		for (didx = 0, i = 0; i < lr->num_lines; i++) {
+			if (lv.mask & BIT_ULL(i)) {
+				descs[didx] = lr->lines[i].desc;
+				didx++;
+			}
+		}
+	}
+	ret = gpiod_get_array_value_complex(false, true, num_get,
+					    descs, NULL, vals);
+
+	if (num_get != 1)
+		kfree(descs);
+	if (ret)
+		return ret;
+
+	lv.bits = 0;
+	for (didx = 0, i = 0; i < lr->num_lines; i++) {
+		if (lv.mask & BIT_ULL(i)) {
+			if (lr->lines[i].sw_debounced)
+				val = debounced_value(&lr->lines[i]);
+			else
+				val = test_bit(didx, vals);
+			if (val)
+				lv.bits |= BIT_ULL(i);
+			didx++;
+		}
+	}
+
+	if (copy_to_user(ip, &lv, sizeof(lv)))
+		return -EFAULT;
+
+	return 0;
+}
+
+static long linereq_set_values_unlocked(struct linereq *lr,
+					struct gpio_v2_line_values *lv)
+{
+	DECLARE_BITMAP(vals, GPIO_V2_LINES_MAX);
+	struct gpio_desc **descs;
+	unsigned int i, didx, num_set;
+	int ret;
+
+	bitmap_zero(vals, GPIO_V2_LINES_MAX);
+	for (num_set = 0, i = 0; i < lr->num_lines; i++) {
+		if (lv->mask & BIT_ULL(i)) {
+			if (!test_bit(FLAG_IS_OUT, &lr->lines[i].desc->flags))
+				return -EPERM;
+			if (lv->bits & BIT_ULL(i))
+				__set_bit(num_set, vals);
+			num_set++;
+			descs = &lr->lines[i].desc;
+		}
+	}
+	if (num_set == 0)
+		return -EINVAL;
+
+	if (num_set != 1) {
+		/* build compacted desc array and values */
+		descs = kmalloc_array(num_set, sizeof(*descs), GFP_KERNEL);
+		if (!descs)
+			return -ENOMEM;
+		for (didx = 0, i = 0; i < lr->num_lines; i++) {
+			if (lv->mask & BIT_ULL(i)) {
+				descs[didx] = lr->lines[i].desc;
+				didx++;
+			}
+		}
+	}
+	ret = gpiod_set_array_value_complex(false, true, num_set,
+					    descs, NULL, vals);
+
+	if (num_set != 1)
+		kfree(descs);
+	return ret;
+}
+
+static long linereq_set_values(struct linereq *lr, void __user *ip)
+{
+	struct gpio_v2_line_values lv;
+	int ret;
+
+	if (copy_from_user(&lv, ip, sizeof(lv)))
+		return -EFAULT;
+
+	mutex_lock(&lr->config_mutex);
+
+	ret = linereq_set_values_unlocked(lr, &lv);
+
+	mutex_unlock(&lr->config_mutex);
+
+	return ret;
+}
+
+static long linereq_set_config_unlocked(struct linereq *lr,
+					struct gpio_v2_line_config *lc)
+{
+	struct gpio_desc *desc;
+	unsigned int i;
+	u64 flags;
+	bool polarity_change;
+	int ret;
+
+	for (i = 0; i < lr->num_lines; i++) {
+		desc = lr->lines[i].desc;
+		flags = gpio_v2_line_config_flags(lc, i);
+		polarity_change =
+			(!!test_bit(FLAG_ACTIVE_LOW, &desc->flags) !=
+			 ((flags & GPIO_V2_LINE_FLAG_ACTIVE_LOW) != 0));
+
+		gpio_v2_line_config_flags_to_desc_flags(flags, &desc->flags);
+		/*
+		 * Lines have to be requested explicitly for input
+		 * or output, else the line will be treated "as is".
+		 */
+		if (flags & GPIO_V2_LINE_FLAG_OUTPUT) {
+			int val = gpio_v2_line_config_output_value(lc, i);
+
+			edge_detector_stop(&lr->lines[i]);
+			ret = gpiod_direction_output(desc, val);
+			if (ret)
+				return ret;
+		} else if (flags & GPIO_V2_LINE_FLAG_INPUT) {
+			ret = gpiod_direction_input(desc);
+			if (ret)
+				return ret;
+
+			ret = edge_detector_update(&lr->lines[i], lc, i,
+					flags & GPIO_V2_LINE_EDGE_FLAGS,
+					polarity_change);
+			if (ret)
+				return ret;
+		}
+
+		blocking_notifier_call_chain(&desc->gdev->notifier,
+					     GPIO_V2_LINE_CHANGED_CONFIG,
+					     desc);
+	}
+	return 0;
+}
+
+static long linereq_set_config(struct linereq *lr, void __user *ip)
+{
+	struct gpio_v2_line_config lc;
+	int ret;
+
+	if (copy_from_user(&lc, ip, sizeof(lc)))
+		return -EFAULT;
+
+	ret = gpio_v2_line_config_validate(&lc, lr->num_lines);
+	if (ret)
+		return ret;
+
+	mutex_lock(&lr->config_mutex);
+
+	ret = linereq_set_config_unlocked(lr, &lc);
+
+	mutex_unlock(&lr->config_mutex);
+
+	return ret;
+}
+
+static long linereq_ioctl(struct file *file, unsigned int cmd,
+			  unsigned long arg)
+{
+	struct linereq *lr = file->private_data;
+	void __user *ip = (void __user *)arg;
+
+	if (!lr->gdev->chip)
+		return -ENODEV;
+
+	switch (cmd) {
+	case GPIO_V2_LINE_GET_VALUES_IOCTL:
+		return linereq_get_values(lr, ip);
+	case GPIO_V2_LINE_SET_VALUES_IOCTL:
+		return linereq_set_values(lr, ip);
+	case GPIO_V2_LINE_SET_CONFIG_IOCTL:
+		return linereq_set_config(lr, ip);
+	default:
+		return -EINVAL;
+	}
+}
+
+#ifdef CONFIG_COMPAT
+static long linereq_ioctl_compat(struct file *file, unsigned int cmd,
+				 unsigned long arg)
+{
+	return linereq_ioctl(file, cmd, (unsigned long)compat_ptr(arg));
+}
+#endif
+
+static __poll_t linereq_poll(struct file *file,
+			    struct poll_table_struct *wait)
+{
+	struct linereq *lr = file->private_data;
+	__poll_t events = 0;
+
+	if (!lr->gdev->chip)
+		return EPOLLHUP | EPOLLERR;
+
+	poll_wait(file, &lr->wait, wait);
+
+	if (!kfifo_is_empty_spinlocked_noirqsave(&lr->events,
+						 &lr->wait.lock))
+		events = EPOLLIN | EPOLLRDNORM;
+
+	return events;
+}
+
+static ssize_t linereq_read(struct file *file,
+			    char __user *buf,
+			    size_t count,
+			    loff_t *f_ps)
+{
+	struct linereq *lr = file->private_data;
+	struct gpio_v2_line_event le;
+	ssize_t bytes_read = 0;
+	int ret;
+
+	if (!lr->gdev->chip)
+		return -ENODEV;
+
+	if (count < sizeof(le))
+		return -EINVAL;
+
+	do {
+		spin_lock(&lr->wait.lock);
+		if (kfifo_is_empty(&lr->events)) {
+			if (bytes_read) {
+				spin_unlock(&lr->wait.lock);
+				return bytes_read;
+			}
+
+			if (file->f_flags & O_NONBLOCK) {
+				spin_unlock(&lr->wait.lock);
+				return -EAGAIN;
+			}
+
+			ret = wait_event_interruptible_locked(lr->wait,
+					!kfifo_is_empty(&lr->events));
+			if (ret) {
+				spin_unlock(&lr->wait.lock);
+				return ret;
+			}
+		}
+
+		ret = kfifo_out(&lr->events, &le, 1);
+		spin_unlock(&lr->wait.lock);
+		if (ret != 1) {
+			/*
+			 * This should never happen - we were holding the
+			 * lock from the moment we learned the fifo is no
+			 * longer empty until now.
+			 */
+			ret = -EIO;
+			break;
+		}
+
+		if (copy_to_user(buf + bytes_read, &le, sizeof(le)))
+			return -EFAULT;
+		bytes_read += sizeof(le);
+	} while (count >= bytes_read + sizeof(le));
+
+	return bytes_read;
+}
+
+static void linereq_free(struct linereq *lr)
+{
+	unsigned int i;
+
+	for (i = 0; i < lr->num_lines; i++) {
+		edge_detector_stop(&lr->lines[i]);
+		if (lr->lines[i].desc)
+			gpiod_free(lr->lines[i].desc);
+	}
+	kfifo_free(&lr->events);
+	kfree(lr->label);
+	put_device(&lr->gdev->dev);
+	kfree(lr);
+}
+
+static int linereq_release(struct inode *inode, struct file *file)
+{
+	struct linereq *lr = file->private_data;
+
+	linereq_free(lr);
+	return 0;
+}
+
+static const struct file_operations line_fileops = {
+	.release = linereq_release,
+	.read = linereq_read,
+	.poll = linereq_poll,
+	.owner = THIS_MODULE,
+	.llseek = noop_llseek,
+	.unlocked_ioctl = linereq_ioctl,
+#ifdef CONFIG_COMPAT
+	.compat_ioctl = linereq_ioctl_compat,
+#endif
+};
+
+static int linereq_create(struct gpio_device *gdev, void __user *ip)
+{
+	struct gpio_v2_line_request ulr;
+	struct gpio_v2_line_config *lc;
+	struct linereq *lr;
+	struct file *file;
+	u64 flags;
+	unsigned int i;
+	int fd, ret;
+
+	if (copy_from_user(&ulr, ip, sizeof(ulr)))
+		return -EFAULT;
+
+	if ((ulr.num_lines == 0) || (ulr.num_lines > GPIO_V2_LINES_MAX))
+		return -EINVAL;
+
+	if (memchr_inv(ulr.padding, 0, sizeof(ulr.padding)))
+		return -EINVAL;
+
+	lc = &ulr.config;
+	ret = gpio_v2_line_config_validate(lc, ulr.num_lines);
+	if (ret)
+		return ret;
+
+	lr = kzalloc(struct_size(lr, lines, ulr.num_lines), GFP_KERNEL);
+	if (!lr)
+		return -ENOMEM;
+
+	lr->gdev = gdev;
+	get_device(&gdev->dev);
+
+	for (i = 0; i < ulr.num_lines; i++) {
+		lr->lines[i].req = lr;
+		WRITE_ONCE(lr->lines[i].sw_debounced, 0);
+		INIT_DELAYED_WORK(&lr->lines[i].work, debounce_work_func);
+	}
+
+	if (ulr.consumer[0] != '\0') {
+		/* label is only initialized if consumer is set */
+		lr->label = kstrndup(ulr.consumer, sizeof(ulr.consumer) - 1,
+				     GFP_KERNEL);
+		if (!lr->label) {
+			ret = -ENOMEM;
+			goto out_free_linereq;
+		}
+	}
+
+	mutex_init(&lr->config_mutex);
+	init_waitqueue_head(&lr->wait);
+	lr->event_buffer_size = ulr.event_buffer_size;
+	if (lr->event_buffer_size == 0)
+		lr->event_buffer_size = ulr.num_lines * 16;
+	else if (lr->event_buffer_size > GPIO_V2_LINES_MAX * 16)
+		lr->event_buffer_size = GPIO_V2_LINES_MAX * 16;
+
+	atomic_set(&lr->seqno, 0);
+	lr->num_lines = ulr.num_lines;
+
+	/* Request each GPIO */
+	for (i = 0; i < ulr.num_lines; i++) {
+		u32 offset = ulr.offsets[i];
+		struct gpio_desc *desc = gpiochip_get_desc(gdev->chip, offset);
+
+		if (IS_ERR(desc)) {
+			ret = PTR_ERR(desc);
+			goto out_free_linereq;
+		}
+
+		ret = gpiod_request(desc, lr->label);
+		if (ret)
+			goto out_free_linereq;
+
+		lr->lines[i].desc = desc;
+		flags = gpio_v2_line_config_flags(lc, i);
+		gpio_v2_line_config_flags_to_desc_flags(flags, &desc->flags);
+
+		ret = gpiod_set_transitory(desc, false);
+		if (ret < 0)
+			goto out_free_linereq;
+
+		/*
+		 * Lines have to be requested explicitly for input
+		 * or output, else the line will be treated "as is".
+		 */
+		if (flags & GPIO_V2_LINE_FLAG_OUTPUT) {
+			int val = gpio_v2_line_config_output_value(lc, i);
+
+			ret = gpiod_direction_output(desc, val);
+			if (ret)
+				goto out_free_linereq;
+		} else if (flags & GPIO_V2_LINE_FLAG_INPUT) {
+			ret = gpiod_direction_input(desc);
+			if (ret)
+				goto out_free_linereq;
+
+			ret = edge_detector_setup(&lr->lines[i], lc, i,
+					flags & GPIO_V2_LINE_EDGE_FLAGS);
+			if (ret)
+				goto out_free_linereq;
+		}
+
+		blocking_notifier_call_chain(&desc->gdev->notifier,
+					     GPIO_V2_LINE_CHANGED_REQUESTED, desc);
+
+		dev_dbg(&gdev->dev, "registered chardev handle for line %d\n",
+			offset);
+	}
+
+	fd = get_unused_fd_flags(O_RDONLY | O_CLOEXEC);
+	if (fd < 0) {
+		ret = fd;
+		goto out_free_linereq;
+	}
+
+	file = anon_inode_getfile("gpio-line", &line_fileops, lr,
+				  O_RDONLY | O_CLOEXEC);
+	if (IS_ERR(file)) {
+		ret = PTR_ERR(file);
+		goto out_put_unused_fd;
+	}
+
+	ulr.fd = fd;
+	if (copy_to_user(ip, &ulr, sizeof(ulr))) {
+		/*
+		 * fput() will trigger the release() callback, so do not go onto
+		 * the regular error cleanup path here.
+		 */
+		fput(file);
+		put_unused_fd(fd);
+		return -EFAULT;
+	}
+
+	fd_install(fd, file);
+
+	dev_dbg(&gdev->dev, "registered chardev handle for %d lines\n",
+		lr->num_lines);
+
+	return 0;
+
+out_put_unused_fd:
+	put_unused_fd(fd);
+out_free_linereq:
+	linereq_free(lr);
+	return ret;
+}
+
+#ifdef CONFIG_GPIO_CDEV_V1
+
+/*
+ * GPIO line event management
+ */
+
+/**
+ * struct lineevent_state - contains the state of a userspace event
+ * @gdev: the GPIO device the event pertains to
+ * @label: consumer label used to tag descriptors
+ * @desc: the GPIO descriptor held by this event
+ * @eflags: the event flags this line was requested with
+ * @irq: the interrupt that trigger in response to events on this GPIO
+ * @wait: wait queue that handles blocking reads of events
+ * @events: KFIFO for the GPIO events
+ * @timestamp: cache for the timestamp storing it between hardirq
+ * and IRQ thread, used to bring the timestamp close to the actual
+ * event
+ */
+struct lineevent_state {
+	struct gpio_device *gdev;
+	const char *label;
+	struct gpio_desc *desc;
+	u32 eflags;
+	int irq;
+	wait_queue_head_t wait;
+	DECLARE_KFIFO(events, struct gpioevent_data, 16);
+	u64 timestamp;
+};
+
+#define GPIOEVENT_REQUEST_VALID_FLAGS \
+	(GPIOEVENT_REQUEST_RISING_EDGE | \
+	GPIOEVENT_REQUEST_FALLING_EDGE)
+
+static __poll_t lineevent_poll(struct file *file,
+			       struct poll_table_struct *wait)
+{
+	struct lineevent_state *le = file->private_data;
+	__poll_t events = 0;
+
+	if (!le->gdev->chip)
+		return EPOLLHUP | EPOLLERR;
+
+	poll_wait(file, &le->wait, wait);
+
+	if (!kfifo_is_empty_spinlocked_noirqsave(&le->events, &le->wait.lock))
+		events = EPOLLIN | EPOLLRDNORM;
+
+	return events;
+}
+
+static ssize_t lineevent_get_size(void)
+{
+#if defined(CONFIG_X86_64) && !defined(CONFIG_UML)
+	/* i386 has no padding after 'id' */
+	if (in_ia32_syscall()) {
+		struct compat_gpioeevent_data {
+			compat_u64	timestamp;
+			u32		id;
+		};
+
+		return sizeof(struct compat_gpioeevent_data);
+	}
+#endif
+	return sizeof(struct gpioevent_data);
+}
+
+static ssize_t lineevent_read(struct file *file,
+			      char __user *buf,
+			      size_t count,
+			      loff_t *f_ps)
+{
+	struct lineevent_state *le = file->private_data;
+	struct gpioevent_data ge;
+	ssize_t bytes_read = 0;
+	ssize_t ge_size;
+	int ret;
+
+	if (!le->gdev->chip)
+		return -ENODEV;
+
+	/*
+	 * When compatible system call is being used the struct gpioevent_data,
+	 * in case of at least ia32, has different size due to the alignment
+	 * differences. Because we have first member 64 bits followed by one of
+	 * 32 bits there is no gap between them. The only difference is the
+	 * padding at the end of the data structure. Hence, we calculate the
+	 * actual sizeof() and pass this as an argument to copy_to_user() to
+	 * drop unneeded bytes from the output.
+	 */
+	ge_size = lineevent_get_size();
+	if (count < ge_size)
+		return -EINVAL;
+
+	do {
+		spin_lock(&le->wait.lock);
+		if (kfifo_is_empty(&le->events)) {
+			if (bytes_read) {
+				spin_unlock(&le->wait.lock);
+				return bytes_read;
+			}
+
+			if (file->f_flags & O_NONBLOCK) {
+				spin_unlock(&le->wait.lock);
+				return -EAGAIN;
+			}
+
+			ret = wait_event_interruptible_locked(le->wait,
+					!kfifo_is_empty(&le->events));
+			if (ret) {
+				spin_unlock(&le->wait.lock);
+				return ret;
+			}
+		}
+
+		ret = kfifo_out(&le->events, &ge, 1);
+		spin_unlock(&le->wait.lock);
+		if (ret != 1) {
+			/*
+			 * This should never happen - we were holding the lock
+			 * from the moment we learned the fifo is no longer
+			 * empty until now.
+			 */
+			ret = -EIO;
+			break;
+		}
+
+		if (copy_to_user(buf + bytes_read, &ge, ge_size))
+			return -EFAULT;
+		bytes_read += ge_size;
+	} while (count >= bytes_read + ge_size);
+
+	return bytes_read;
+}
+
+static void lineevent_free(struct lineevent_state *le)
+{
+	if (le->irq)
+		free_irq(le->irq, le);
+	if (le->desc)
+		gpiod_free(le->desc);
+	kfree(le->label);
+	put_device(&le->gdev->dev);
+	kfree(le);
+}
+
+static int lineevent_release(struct inode *inode, struct file *file)
+{
+	lineevent_free(file->private_data);
+	return 0;
+}
+
+static long lineevent_ioctl(struct file *file, unsigned int cmd,
+			    unsigned long arg)
+{
+	struct lineevent_state *le = file->private_data;
+	void __user *ip = (void __user *)arg;
+	struct gpiohandle_data ghd;
+
+	if (!le->gdev->chip)
+		return -ENODEV;
+
+	/*
+	 * We can get the value for an event line but not set it,
+	 * because it is input by definition.
+	 */
+	if (cmd == GPIOHANDLE_GET_LINE_VALUES_IOCTL) {
+		int val;
+
+		memset(&ghd, 0, sizeof(ghd));
+
+		val = gpiod_get_value_cansleep(le->desc);
+		if (val < 0)
+			return val;
+		ghd.values[0] = val;
+
+		if (copy_to_user(ip, &ghd, sizeof(ghd)))
+			return -EFAULT;
+
+		return 0;
+	}
+	return -EINVAL;
+}
+
+#ifdef CONFIG_COMPAT
+static long lineevent_ioctl_compat(struct file *file, unsigned int cmd,
+				   unsigned long arg)
+{
+	return lineevent_ioctl(file, cmd, (unsigned long)compat_ptr(arg));
+}
+#endif
+
+static const struct file_operations lineevent_fileops = {
+	.release = lineevent_release,
+	.read = lineevent_read,
+	.poll = lineevent_poll,
+	.owner = THIS_MODULE,
+	.llseek = noop_llseek,
+	.unlocked_ioctl = lineevent_ioctl,
+#ifdef CONFIG_COMPAT
+	.compat_ioctl = lineevent_ioctl_compat,
+#endif
+};
+
+static irqreturn_t lineevent_irq_thread(int irq, void *p)
+{
+	struct lineevent_state *le = p;
+	struct gpioevent_data ge;
+	int ret;
+
+	/* Do not leak kernel stack to userspace */
+	memset(&ge, 0, sizeof(ge));
+
+	/*
+	 * We may be running from a nested threaded interrupt in which case
+	 * we didn't get the timestamp from lineevent_irq_handler().
+	 */
+	if (!le->timestamp)
+		ge.timestamp = ktime_get_ns();
+	else
+		ge.timestamp = le->timestamp;
+
+	if (le->eflags & GPIOEVENT_REQUEST_RISING_EDGE
+	    && le->eflags & GPIOEVENT_REQUEST_FALLING_EDGE) {
+		int level = gpiod_get_value_cansleep(le->desc);
+
+		if (level)
+			/* Emit low-to-high event */
+			ge.id = GPIOEVENT_EVENT_RISING_EDGE;
+		else
+			/* Emit high-to-low event */
+			ge.id = GPIOEVENT_EVENT_FALLING_EDGE;
+	} else if (le->eflags & GPIOEVENT_REQUEST_RISING_EDGE) {
+		/* Emit low-to-high event */
+		ge.id = GPIOEVENT_EVENT_RISING_EDGE;
+	} else if (le->eflags & GPIOEVENT_REQUEST_FALLING_EDGE) {
+		/* Emit high-to-low event */
+		ge.id = GPIOEVENT_EVENT_FALLING_EDGE;
+	} else {
+		return IRQ_NONE;
+	}
+
+	ret = kfifo_in_spinlocked_noirqsave(&le->events, &ge,
+					    1, &le->wait.lock);
+	if (ret)
+		wake_up_poll(&le->wait, EPOLLIN);
+	else
+		pr_debug_ratelimited("event FIFO is full - event dropped\n");
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t lineevent_irq_handler(int irq, void *p)
+{
+	struct lineevent_state *le = p;
+
+	/*
+	 * Just store the timestamp in hardirq context so we get it as
+	 * close in time as possible to the actual event.
+	 */
+	le->timestamp = ktime_get_ns();
+
+	return IRQ_WAKE_THREAD;
+}
+
+static int lineevent_create(struct gpio_device *gdev, void __user *ip)
+{
+	struct gpioevent_request eventreq;
+	struct lineevent_state *le;
+	struct gpio_desc *desc;
+	struct file *file;
+	u32 offset;
+	u32 lflags;
+	u32 eflags;
+	int fd;
+	int ret;
+	int irq, irqflags = 0;
+
+	if (copy_from_user(&eventreq, ip, sizeof(eventreq)))
+		return -EFAULT;
+
+	offset = eventreq.lineoffset;
+	lflags = eventreq.handleflags;
+	eflags = eventreq.eventflags;
+
+	desc = gpiochip_get_desc(gdev->chip, offset);
+	if (IS_ERR(desc))
+		return PTR_ERR(desc);
+
+	/* Return an error if a unknown flag is set */
+	if ((lflags & ~GPIOHANDLE_REQUEST_VALID_FLAGS) ||
+	    (eflags & ~GPIOEVENT_REQUEST_VALID_FLAGS))
+		return -EINVAL;
+
+	/* This is just wrong: we don't look for events on output lines */
+	if ((lflags & GPIOHANDLE_REQUEST_OUTPUT) ||
+	    (lflags & GPIOHANDLE_REQUEST_OPEN_DRAIN) ||
+	    (lflags & GPIOHANDLE_REQUEST_OPEN_SOURCE))
+		return -EINVAL;
+
+	/* Only one bias flag can be set. */
+	if (((lflags & GPIOHANDLE_REQUEST_BIAS_DISABLE) &&
+	     (lflags & (GPIOHANDLE_REQUEST_BIAS_PULL_DOWN |
+			GPIOHANDLE_REQUEST_BIAS_PULL_UP))) ||
+	    ((lflags & GPIOHANDLE_REQUEST_BIAS_PULL_DOWN) &&
+	     (lflags & GPIOHANDLE_REQUEST_BIAS_PULL_UP)))
+		return -EINVAL;
+
+	le = kzalloc(sizeof(*le), GFP_KERNEL);
+	if (!le)
+		return -ENOMEM;
+	le->gdev = gdev;
+	get_device(&gdev->dev);
+
+	if (eventreq.consumer_label[0] != '\0') {
+		/* label is only initialized if consumer_label is set */
+		le->label = kstrndup(eventreq.consumer_label,
+				     sizeof(eventreq.consumer_label) - 1,
+				     GFP_KERNEL);
+		if (!le->label) {
+			ret = -ENOMEM;
+			goto out_free_le;
+		}
+	}
+
+	ret = gpiod_request(desc, le->label);
+	if (ret)
+		goto out_free_le;
+	le->desc = desc;
+	le->eflags = eflags;
+
+	linehandle_flags_to_desc_flags(lflags, &desc->flags);
+
+	ret = gpiod_direction_input(desc);
+	if (ret)
+		goto out_free_le;
+
+	blocking_notifier_call_chain(&desc->gdev->notifier,
+				     GPIO_V2_LINE_CHANGED_REQUESTED, desc);
+
+	irq = gpiod_to_irq(desc);
+	if (irq <= 0) {
+		ret = -ENODEV;
+		goto out_free_le;
+	}
+
+	if (eflags & GPIOEVENT_REQUEST_RISING_EDGE)
+		irqflags |= test_bit(FLAG_ACTIVE_LOW, &desc->flags) ?
+			IRQF_TRIGGER_FALLING : IRQF_TRIGGER_RISING;
+	if (eflags & GPIOEVENT_REQUEST_FALLING_EDGE)
+		irqflags |= test_bit(FLAG_ACTIVE_LOW, &desc->flags) ?
+			IRQF_TRIGGER_RISING : IRQF_TRIGGER_FALLING;
+	irqflags |= IRQF_ONESHOT;
+
+	INIT_KFIFO(le->events);
+	init_waitqueue_head(&le->wait);
+
+	/* Request a thread to read the events */
+	ret = request_threaded_irq(irq,
+				   lineevent_irq_handler,
+				   lineevent_irq_thread,
+				   irqflags,
+				   le->label,
+				   le);
+	if (ret)
+		goto out_free_le;
+
+	le->irq = irq;
+
+	fd = get_unused_fd_flags(O_RDONLY | O_CLOEXEC);
+	if (fd < 0) {
+		ret = fd;
+		goto out_free_le;
+	}
+
+	file = anon_inode_getfile("gpio-event",
+				  &lineevent_fileops,
+				  le,
+				  O_RDONLY | O_CLOEXEC);
+	if (IS_ERR(file)) {
+		ret = PTR_ERR(file);
+		goto out_put_unused_fd;
+	}
+
+	eventreq.fd = fd;
+	if (copy_to_user(ip, &eventreq, sizeof(eventreq))) {
+		/*
+		 * fput() will trigger the release() callback, so do not go onto
+		 * the regular error cleanup path here.
+		 */
+		fput(file);
+		put_unused_fd(fd);
+		return -EFAULT;
+	}
+
+	fd_install(fd, file);
+
+	return 0;
+
+out_put_unused_fd:
+	put_unused_fd(fd);
+out_free_le:
+	lineevent_free(le);
+	return ret;
+}
+
+static void gpio_v2_line_info_to_v1(struct gpio_v2_line_info *info_v2,
+				    struct gpioline_info *info_v1)
+{
+	u64 flagsv2 = info_v2->flags;
+
+	memcpy(info_v1->name, info_v2->name, sizeof(info_v1->name));
+	memcpy(info_v1->consumer, info_v2->consumer, sizeof(info_v1->consumer));
+	info_v1->line_offset = info_v2->offset;
+	info_v1->flags = 0;
+
+	if (flagsv2 & GPIO_V2_LINE_FLAG_USED)
+		info_v1->flags |= GPIOLINE_FLAG_KERNEL;
+
+	if (flagsv2 & GPIO_V2_LINE_FLAG_OUTPUT)
+		info_v1->flags |= GPIOLINE_FLAG_IS_OUT;
+
+	if (flagsv2 & GPIO_V2_LINE_FLAG_ACTIVE_LOW)
+		info_v1->flags |= GPIOLINE_FLAG_ACTIVE_LOW;
+
+	if (flagsv2 & GPIO_V2_LINE_FLAG_OPEN_DRAIN)
+		info_v1->flags |= GPIOLINE_FLAG_OPEN_DRAIN;
+	if (flagsv2 & GPIO_V2_LINE_FLAG_OPEN_SOURCE)
+		info_v1->flags |= GPIOLINE_FLAG_OPEN_SOURCE;
+
+	if (flagsv2 & GPIO_V2_LINE_FLAG_BIAS_PULL_UP)
+		info_v1->flags |= GPIOLINE_FLAG_BIAS_PULL_UP;
+	if (flagsv2 & GPIO_V2_LINE_FLAG_BIAS_PULL_DOWN)
+		info_v1->flags |= GPIOLINE_FLAG_BIAS_PULL_DOWN;
+	if (flagsv2 & GPIO_V2_LINE_FLAG_BIAS_DISABLED)
+		info_v1->flags |= GPIOLINE_FLAG_BIAS_DISABLE;
+}
+
+static void gpio_v2_line_info_changed_to_v1(
+		struct gpio_v2_line_info_changed *lic_v2,
+		struct gpioline_info_changed *lic_v1)
+{
+	memset(lic_v1, 0, sizeof(*lic_v1));
+	gpio_v2_line_info_to_v1(&lic_v2->info, &lic_v1->info);
+	lic_v1->timestamp = lic_v2->timestamp_ns;
+	lic_v1->event_type = lic_v2->event_type;
+}
+
+#endif /* CONFIG_GPIO_CDEV_V1 */
+
+static void gpio_desc_to_lineinfo(struct gpio_desc *desc,
+				  struct gpio_v2_line_info *info)
+{
+	struct gpio_chip *gc = desc->gdev->chip;
+	bool ok_for_pinctrl;
+	unsigned long flags;
+	u32 debounce_period_us;
+	unsigned int num_attrs = 0;
+
+	memset(info, 0, sizeof(*info));
+	info->offset = gpio_chip_hwgpio(desc);
+
+	/*
+	 * This function takes a mutex so we must check this before taking
+	 * the spinlock.
+	 *
+	 * FIXME: find a non-racy way to retrieve this information. Maybe a
+	 * lock common to both frameworks?
+	 */
+	ok_for_pinctrl =
+		pinctrl_gpio_can_use_line(gc->base + info->offset);
+
+	spin_lock_irqsave(&gpio_lock, flags);
+
+	if (desc->name)
+		strscpy(info->name, desc->name, sizeof(info->name));
+
+	if (desc->label)
+		strscpy(info->consumer, desc->label, sizeof(info->consumer));
+
+	/*
+	 * Userspace only need to know that the kernel is using this GPIO so
+	 * it can't use it.
+	 */
+	info->flags = 0;
+	if (test_bit(FLAG_REQUESTED, &desc->flags) ||
+	    test_bit(FLAG_IS_HOGGED, &desc->flags) ||
+	    test_bit(FLAG_USED_AS_IRQ, &desc->flags) ||
+	    test_bit(FLAG_EXPORT, &desc->flags) ||
+	    test_bit(FLAG_SYSFS, &desc->flags) ||
+	    !ok_for_pinctrl)
+		info->flags |= GPIO_V2_LINE_FLAG_USED;
+
+	if (test_bit(FLAG_IS_OUT, &desc->flags))
+		info->flags |= GPIO_V2_LINE_FLAG_OUTPUT;
+	else
+		info->flags |= GPIO_V2_LINE_FLAG_INPUT;
+
+	if (test_bit(FLAG_ACTIVE_LOW, &desc->flags))
+		info->flags |= GPIO_V2_LINE_FLAG_ACTIVE_LOW;
+
+	if (test_bit(FLAG_OPEN_DRAIN, &desc->flags))
+		info->flags |= GPIO_V2_LINE_FLAG_OPEN_DRAIN;
+	if (test_bit(FLAG_OPEN_SOURCE, &desc->flags))
+		info->flags |= GPIO_V2_LINE_FLAG_OPEN_SOURCE;
+
+	if (test_bit(FLAG_BIAS_DISABLE, &desc->flags))
+		info->flags |= GPIO_V2_LINE_FLAG_BIAS_DISABLED;
+	if (test_bit(FLAG_PULL_DOWN, &desc->flags))
+		info->flags |= GPIO_V2_LINE_FLAG_BIAS_PULL_DOWN;
+	if (test_bit(FLAG_PULL_UP, &desc->flags))
+		info->flags |= GPIO_V2_LINE_FLAG_BIAS_PULL_UP;
+
+	if (test_bit(FLAG_EDGE_RISING, &desc->flags))
+		info->flags |= GPIO_V2_LINE_FLAG_EDGE_RISING;
+	if (test_bit(FLAG_EDGE_FALLING, &desc->flags))
+		info->flags |= GPIO_V2_LINE_FLAG_EDGE_FALLING;
+
+	debounce_period_us = READ_ONCE(desc->debounce_period_us);
+	if (debounce_period_us) {
+		info->attrs[num_attrs].id = GPIO_V2_LINE_ATTR_ID_DEBOUNCE;
+		info->attrs[num_attrs].debounce_period_us = debounce_period_us;
+		num_attrs++;
+	}
+	info->num_attrs = num_attrs;
+
+	spin_unlock_irqrestore(&gpio_lock, flags);
+}
+
+struct gpio_chardev_data {
+	struct gpio_device *gdev;
+	wait_queue_head_t wait;
+	DECLARE_KFIFO(events, struct gpio_v2_line_info_changed, 32);
+	struct notifier_block lineinfo_changed_nb;
+	unsigned long *watched_lines;
+#ifdef CONFIG_GPIO_CDEV_V1
+	atomic_t watch_abi_version;
+#endif
+};
+
+static int chipinfo_get(struct gpio_chardev_data *cdev, void __user *ip)
+{
+	struct gpio_device *gdev = cdev->gdev;
+	struct gpiochip_info chipinfo;
+
+	memset(&chipinfo, 0, sizeof(chipinfo));
+
+	strscpy(chipinfo.name, dev_name(&gdev->dev), sizeof(chipinfo.name));
+	strscpy(chipinfo.label, gdev->label, sizeof(chipinfo.label));
+	chipinfo.lines = gdev->ngpio;
+	if (copy_to_user(ip, &chipinfo, sizeof(chipinfo)))
+		return -EFAULT;
+	return 0;
+}
+
+#ifdef CONFIG_GPIO_CDEV_V1
+/*
+ * returns 0 if the versions match, else the previously selected ABI version
+ */
+static int lineinfo_ensure_abi_version(struct gpio_chardev_data *cdata,
+				       unsigned int version)
+{
+	int abiv = atomic_cmpxchg(&cdata->watch_abi_version, 0, version);
+
+	if (abiv == version)
+		return 0;
+
+	return abiv;
+}
+
+static int lineinfo_get_v1(struct gpio_chardev_data *cdev, void __user *ip,
+			   bool watch)
+{
+	struct gpio_desc *desc;
+	struct gpioline_info lineinfo;
+	struct gpio_v2_line_info lineinfo_v2;
+
+	if (copy_from_user(&lineinfo, ip, sizeof(lineinfo)))
+		return -EFAULT;
+
+	/* this doubles as a range check on line_offset */
+	desc = gpiochip_get_desc(cdev->gdev->chip, lineinfo.line_offset);
+	if (IS_ERR(desc))
+		return PTR_ERR(desc);
+
+	if (watch) {
+		if (lineinfo_ensure_abi_version(cdev, 1))
+			return -EPERM;
+
+		if (test_and_set_bit(lineinfo.line_offset, cdev->watched_lines))
+			return -EBUSY;
+	}
+
+	gpio_desc_to_lineinfo(desc, &lineinfo_v2);
+	gpio_v2_line_info_to_v1(&lineinfo_v2, &lineinfo);
+
+	if (copy_to_user(ip, &lineinfo, sizeof(lineinfo))) {
+		if (watch)
+			clear_bit(lineinfo.line_offset, cdev->watched_lines);
+		return -EFAULT;
+	}
+
+	return 0;
+}
+#endif
+
+static int lineinfo_get(struct gpio_chardev_data *cdev, void __user *ip,
+			bool watch)
+{
+	struct gpio_desc *desc;
+	struct gpio_v2_line_info lineinfo;
+
+	if (copy_from_user(&lineinfo, ip, sizeof(lineinfo)))
+		return -EFAULT;
+
+	if (memchr_inv(lineinfo.padding, 0, sizeof(lineinfo.padding)))
+		return -EINVAL;
+
+	desc = gpiochip_get_desc(cdev->gdev->chip, lineinfo.offset);
+	if (IS_ERR(desc))
+		return PTR_ERR(desc);
+
+	if (watch) {
+#ifdef CONFIG_GPIO_CDEV_V1
+		if (lineinfo_ensure_abi_version(cdev, 2))
+			return -EPERM;
+#endif
+		if (test_and_set_bit(lineinfo.offset, cdev->watched_lines))
+			return -EBUSY;
+	}
+	gpio_desc_to_lineinfo(desc, &lineinfo);
+
+	if (copy_to_user(ip, &lineinfo, sizeof(lineinfo))) {
+		if (watch)
+			clear_bit(lineinfo.offset, cdev->watched_lines);
+		return -EFAULT;
+	}
+
+	return 0;
+}
+
+static int lineinfo_unwatch(struct gpio_chardev_data *cdev, void __user *ip)
+{
+	__u32 offset;
+
+	if (copy_from_user(&offset, ip, sizeof(offset)))
+		return -EFAULT;
+
+	if (offset >= cdev->gdev->ngpio)
+		return -EINVAL;
+
+	if (!test_and_clear_bit(offset, cdev->watched_lines))
+		return -EBUSY;
+
+	return 0;
+}
+
+/*
+ * gpio_ioctl() - ioctl handler for the GPIO chardev
+ */
+static long gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	struct gpio_chardev_data *cdev = file->private_data;
+	struct gpio_device *gdev = cdev->gdev;
+	void __user *ip = (void __user *)arg;
+
+	/* We fail any subsequent ioctl():s when the chip is gone */
+	if (!gdev->chip)
+		return -ENODEV;
+
+	/* Fill in the struct and pass to userspace */
+	switch (cmd) {
+	case GPIO_GET_CHIPINFO_IOCTL:
+		return chipinfo_get(cdev, ip);
+#ifdef CONFIG_GPIO_CDEV_V1
+	case GPIO_GET_LINEHANDLE_IOCTL:
+		return linehandle_create(gdev, ip);
+	case GPIO_GET_LINEEVENT_IOCTL:
+		return lineevent_create(gdev, ip);
+	case GPIO_GET_LINEINFO_IOCTL:
+		return lineinfo_get_v1(cdev, ip, false);
+	case GPIO_GET_LINEINFO_WATCH_IOCTL:
+		return lineinfo_get_v1(cdev, ip, true);
+#endif /* CONFIG_GPIO_CDEV_V1 */
+	case GPIO_V2_GET_LINEINFO_IOCTL:
+		return lineinfo_get(cdev, ip, false);
+	case GPIO_V2_GET_LINEINFO_WATCH_IOCTL:
+		return lineinfo_get(cdev, ip, true);
+	case GPIO_V2_GET_LINE_IOCTL:
+		return linereq_create(gdev, ip);
+	case GPIO_GET_LINEINFO_UNWATCH_IOCTL:
+		return lineinfo_unwatch(cdev, ip);
+	default:
+		return -EINVAL;
+	}
+}
+
+#ifdef CONFIG_COMPAT
+static long gpio_ioctl_compat(struct file *file, unsigned int cmd,
+			      unsigned long arg)
+{
+	return gpio_ioctl(file, cmd, (unsigned long)compat_ptr(arg));
+}
+#endif
+
+static struct gpio_chardev_data *
+to_gpio_chardev_data(struct notifier_block *nb)
+{
+	return container_of(nb, struct gpio_chardev_data, lineinfo_changed_nb);
+}
+
+static int lineinfo_changed_notify(struct notifier_block *nb,
+				   unsigned long action, void *data)
+{
+	struct gpio_chardev_data *cdev = to_gpio_chardev_data(nb);
+	struct gpio_v2_line_info_changed chg;
+	struct gpio_desc *desc = data;
+	int ret;
+
+	if (!test_bit(gpio_chip_hwgpio(desc), cdev->watched_lines))
+		return NOTIFY_DONE;
+
+	memset(&chg, 0, sizeof(chg));
+	chg.event_type = action;
+	chg.timestamp_ns = ktime_get_ns();
+	gpio_desc_to_lineinfo(desc, &chg.info);
+
+	ret = kfifo_in_spinlocked(&cdev->events, &chg, 1, &cdev->wait.lock);
+	if (ret)
+		wake_up_poll(&cdev->wait, EPOLLIN);
+	else
+		pr_debug_ratelimited("lineinfo event FIFO is full - event dropped\n");
+
+	return NOTIFY_OK;
+}
+
+static __poll_t lineinfo_watch_poll(struct file *file,
+				    struct poll_table_struct *pollt)
+{
+	struct gpio_chardev_data *cdev = file->private_data;
+	__poll_t events = 0;
+
+	if (!cdev->gdev->chip)
+		return EPOLLHUP | EPOLLERR;
+
+	poll_wait(file, &cdev->wait, pollt);
+
+	if (!kfifo_is_empty_spinlocked_noirqsave(&cdev->events,
+						 &cdev->wait.lock))
+		events = EPOLLIN | EPOLLRDNORM;
+
+	return events;
+}
+
+static ssize_t lineinfo_watch_read(struct file *file, char __user *buf,
+				   size_t count, loff_t *off)
+{
+	struct gpio_chardev_data *cdev = file->private_data;
+	struct gpio_v2_line_info_changed event;
+	ssize_t bytes_read = 0;
+	int ret;
+	size_t event_size;
+
+	if (!cdev->gdev->chip)
+		return -ENODEV;
+
+#ifndef CONFIG_GPIO_CDEV_V1
+	event_size = sizeof(struct gpio_v2_line_info_changed);
+	if (count < event_size)
+		return -EINVAL;
+#endif
+
+	do {
+		spin_lock(&cdev->wait.lock);
+		if (kfifo_is_empty(&cdev->events)) {
+			if (bytes_read) {
+				spin_unlock(&cdev->wait.lock);
+				return bytes_read;
+			}
+
+			if (file->f_flags & O_NONBLOCK) {
+				spin_unlock(&cdev->wait.lock);
+				return -EAGAIN;
+			}
+
+			ret = wait_event_interruptible_locked(cdev->wait,
+					!kfifo_is_empty(&cdev->events));
+			if (ret) {
+				spin_unlock(&cdev->wait.lock);
+				return ret;
+			}
+		}
+#ifdef CONFIG_GPIO_CDEV_V1
+		/* must be after kfifo check so watch_abi_version is set */
+		if (atomic_read(&cdev->watch_abi_version) == 2)
+			event_size = sizeof(struct gpio_v2_line_info_changed);
+		else
+			event_size = sizeof(struct gpioline_info_changed);
+		if (count < event_size) {
+			spin_unlock(&cdev->wait.lock);
+			return -EINVAL;
+		}
+#endif
+		ret = kfifo_out(&cdev->events, &event, 1);
+		spin_unlock(&cdev->wait.lock);
+		if (ret != 1) {
+			ret = -EIO;
+			break;
+			/* We should never get here. See lineevent_read(). */
+		}
+
+#ifdef CONFIG_GPIO_CDEV_V1
+		if (event_size == sizeof(struct gpio_v2_line_info_changed)) {
+			if (copy_to_user(buf + bytes_read, &event, event_size))
+				return -EFAULT;
+		} else {
+			struct gpioline_info_changed event_v1;
+
+			gpio_v2_line_info_changed_to_v1(&event, &event_v1);
+			if (copy_to_user(buf + bytes_read, &event_v1,
+					 event_size))
+				return -EFAULT;
+		}
+#else
+		if (copy_to_user(buf + bytes_read, &event, event_size))
+			return -EFAULT;
+#endif
+		bytes_read += event_size;
+	} while (count >= bytes_read + sizeof(event));
+
+	return bytes_read;
+}
+
+/**
+ * gpio_chrdev_open() - open the chardev for ioctl operations
+ * @inode: inode for this chardev
+ * @file: file struct for storing private data
+ * Returns 0 on success
+ */
+static int gpio_chrdev_open(struct inode *inode, struct file *file)
+{
+	struct gpio_device *gdev = container_of(inode->i_cdev,
+						struct gpio_device, chrdev);
+	struct gpio_chardev_data *cdev;
+	int ret = -ENOMEM;
+
+	/* Fail on open if the backing gpiochip is gone */
+	if (!gdev->chip)
+		return -ENODEV;
+
+	cdev = kzalloc(sizeof(*cdev), GFP_KERNEL);
+	if (!cdev)
+		return -ENOMEM;
+
+	cdev->watched_lines = bitmap_zalloc(gdev->chip->ngpio, GFP_KERNEL);
+	if (!cdev->watched_lines)
+		goto out_free_cdev;
+
+	init_waitqueue_head(&cdev->wait);
+	INIT_KFIFO(cdev->events);
+	cdev->gdev = gdev;
+
+	cdev->lineinfo_changed_nb.notifier_call = lineinfo_changed_notify;
+	ret = blocking_notifier_chain_register(&gdev->notifier,
+					       &cdev->lineinfo_changed_nb);
+	if (ret)
+		goto out_free_bitmap;
+
+	get_device(&gdev->dev);
+	file->private_data = cdev;
+
+	ret = nonseekable_open(inode, file);
+	if (ret)
+		goto out_unregister_notifier;
+
+	return ret;
+
+out_unregister_notifier:
+	blocking_notifier_chain_unregister(&gdev->notifier,
+					   &cdev->lineinfo_changed_nb);
+out_free_bitmap:
+	bitmap_free(cdev->watched_lines);
+out_free_cdev:
+	kfree(cdev);
+	return ret;
+}
+
+/**
+ * gpio_chrdev_release() - close chardev after ioctl operations
+ * @inode: inode for this chardev
+ * @file: file struct for storing private data
+ * Returns 0 on success
+ */
+static int gpio_chrdev_release(struct inode *inode, struct file *file)
+{
+	struct gpio_chardev_data *cdev = file->private_data;
+	struct gpio_device *gdev = cdev->gdev;
+
+	bitmap_free(cdev->watched_lines);
+	blocking_notifier_chain_unregister(&gdev->notifier,
+					   &cdev->lineinfo_changed_nb);
+	put_device(&gdev->dev);
+	kfree(cdev);
+
+	return 0;
+}
+
+static const struct file_operations gpio_fileops = {
+	.release = gpio_chrdev_release,
+	.open = gpio_chrdev_open,
+	.poll = lineinfo_watch_poll,
+	.read = lineinfo_watch_read,
+	.owner = THIS_MODULE,
+	.llseek = no_llseek,
+	.unlocked_ioctl = gpio_ioctl,
+#ifdef CONFIG_COMPAT
+	.compat_ioctl = gpio_ioctl_compat,
+#endif
+};
+
+int gpiolib_cdev_register(struct gpio_device *gdev, dev_t devt)
+{
+	int ret;
+
+	cdev_init(&gdev->chrdev, &gpio_fileops);
+	gdev->chrdev.owner = THIS_MODULE;
+	gdev->dev.devt = MKDEV(MAJOR(devt), gdev->id);
+
+	ret = cdev_device_add(&gdev->chrdev, &gdev->dev);
+	if (ret)
+		return ret;
+
+	chip_dbg(gdev->chip, "added GPIO chardev (%d:%d)\n",
+		 MAJOR(devt), gdev->id);
+
+	return 0;
+}
+
+void gpiolib_cdev_unregister(struct gpio_device *gdev)
+{
+	cdev_device_del(&gdev->chrdev, &gdev->dev);
+}
diff --git a/drivers/gpio/gpiolib-cdev.h b/drivers/gpio/gpiolib-cdev.h
new file mode 100644
index 000000000..b42644cbf
--- /dev/null
+++ b/drivers/gpio/gpiolib-cdev.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef GPIOLIB_CDEV_H
+#define GPIOLIB_CDEV_H
+
+#include <linux/types.h>
+
+struct gpio_device;
+
+int gpiolib_cdev_register(struct gpio_device *gdev, dev_t devt);
+void gpiolib_cdev_unregister(struct gpio_device *gdev);
+
+#endif /* GPIOLIB_CDEV_H */
diff --git a/drivers/gpio/gpiolib-devres.c b/drivers/gpio/gpiolib-devres.c
new file mode 100644
index 000000000..7dbce4c4e
--- /dev/null
+++ b/drivers/gpio/gpiolib-devres.c
@@ -0,0 +1,529 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * devres.c - managed gpio resources
+ * This file is based on kernel/irq/devres.c
+ *
+ * Copyright (c) 2011 John Crispin <john@phrozen.org>
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
+#include <linux/device.h>
+#include <linux/gfp.h>
+
+#include "gpiolib.h"
+
+static void devm_gpiod_release(struct device *dev, void *res)
+{
+	struct gpio_desc **desc = res;
+
+	gpiod_put(*desc);
+}
+
+static int devm_gpiod_match(struct device *dev, void *res, void *data)
+{
+	struct gpio_desc **this = res, **gpio = data;
+
+	return *this == *gpio;
+}
+
+static void devm_gpiod_release_array(struct device *dev, void *res)
+{
+	struct gpio_descs **descs = res;
+
+	gpiod_put_array(*descs);
+}
+
+static int devm_gpiod_match_array(struct device *dev, void *res, void *data)
+{
+	struct gpio_descs **this = res, **gpios = data;
+
+	return *this == *gpios;
+}
+
+/**
+ * devm_gpiod_get - Resource-managed gpiod_get()
+ * @dev:	GPIO consumer
+ * @con_id:	function within the GPIO consumer
+ * @flags:	optional GPIO initialization flags
+ *
+ * Managed gpiod_get(). GPIO descriptors returned from this function are
+ * automatically disposed on driver detach. See gpiod_get() for detailed
+ * information about behavior and return values.
+ */
+struct gpio_desc *__must_check devm_gpiod_get(struct device *dev,
+					      const char *con_id,
+					      enum gpiod_flags flags)
+{
+	return devm_gpiod_get_index(dev, con_id, 0, flags);
+}
+EXPORT_SYMBOL_GPL(devm_gpiod_get);
+
+/**
+ * devm_gpiod_get_optional - Resource-managed gpiod_get_optional()
+ * @dev: GPIO consumer
+ * @con_id: function within the GPIO consumer
+ * @flags: optional GPIO initialization flags
+ *
+ * Managed gpiod_get_optional(). GPIO descriptors returned from this function
+ * are automatically disposed on driver detach. See gpiod_get_optional() for
+ * detailed information about behavior and return values.
+ */
+struct gpio_desc *__must_check devm_gpiod_get_optional(struct device *dev,
+						       const char *con_id,
+						       enum gpiod_flags flags)
+{
+	return devm_gpiod_get_index_optional(dev, con_id, 0, flags);
+}
+EXPORT_SYMBOL_GPL(devm_gpiod_get_optional);
+
+/**
+ * devm_gpiod_get_index - Resource-managed gpiod_get_index()
+ * @dev:	GPIO consumer
+ * @con_id:	function within the GPIO consumer
+ * @idx:	index of the GPIO to obtain in the consumer
+ * @flags:	optional GPIO initialization flags
+ *
+ * Managed gpiod_get_index(). GPIO descriptors returned from this function are
+ * automatically disposed on driver detach. See gpiod_get_index() for detailed
+ * information about behavior and return values.
+ */
+struct gpio_desc *__must_check devm_gpiod_get_index(struct device *dev,
+						    const char *con_id,
+						    unsigned int idx,
+						    enum gpiod_flags flags)
+{
+	struct gpio_desc **dr;
+	struct gpio_desc *desc;
+
+	desc = gpiod_get_index(dev, con_id, idx, flags);
+	if (IS_ERR(desc))
+		return desc;
+
+	/*
+	 * For non-exclusive GPIO descriptors, check if this descriptor is
+	 * already under resource management by this device.
+	 */
+	if (flags & GPIOD_FLAGS_BIT_NONEXCLUSIVE) {
+		struct devres *dres;
+
+		dres = devres_find(dev, devm_gpiod_release,
+				   devm_gpiod_match, &desc);
+		if (dres)
+			return desc;
+	}
+
+	dr = devres_alloc(devm_gpiod_release, sizeof(struct gpio_desc *),
+			  GFP_KERNEL);
+	if (!dr) {
+		gpiod_put(desc);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	*dr = desc;
+	devres_add(dev, dr);
+
+	return desc;
+}
+EXPORT_SYMBOL_GPL(devm_gpiod_get_index);
+
+/**
+ * devm_gpiod_get_from_of_node() - obtain a GPIO from an OF node
+ * @dev:	device for lifecycle management
+ * @node:	handle of the OF node
+ * @propname:	name of the DT property representing the GPIO
+ * @index:	index of the GPIO to obtain for the consumer
+ * @dflags:	GPIO initialization flags
+ * @label:	label to attach to the requested GPIO
+ *
+ * Returns:
+ * On successful request the GPIO pin is configured in accordance with
+ * provided @dflags.
+ *
+ * In case of error an ERR_PTR() is returned.
+ */
+struct gpio_desc *devm_gpiod_get_from_of_node(struct device *dev,
+					      struct device_node *node,
+					      const char *propname, int index,
+					      enum gpiod_flags dflags,
+					      const char *label)
+{
+	struct gpio_desc **dr;
+	struct gpio_desc *desc;
+
+	desc = gpiod_get_from_of_node(node, propname, index, dflags, label);
+	if (IS_ERR(desc))
+		return desc;
+
+	/*
+	 * For non-exclusive GPIO descriptors, check if this descriptor is
+	 * already under resource management by this device.
+	 */
+	if (dflags & GPIOD_FLAGS_BIT_NONEXCLUSIVE) {
+		struct devres *dres;
+
+		dres = devres_find(dev, devm_gpiod_release,
+				   devm_gpiod_match, &desc);
+		if (dres)
+			return desc;
+	}
+
+	dr = devres_alloc(devm_gpiod_release, sizeof(struct gpio_desc *),
+			  GFP_KERNEL);
+	if (!dr) {
+		gpiod_put(desc);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	*dr = desc;
+	devres_add(dev, dr);
+
+	return desc;
+}
+EXPORT_SYMBOL_GPL(devm_gpiod_get_from_of_node);
+
+/**
+ * devm_fwnode_gpiod_get_index - get a GPIO descriptor from a given node
+ * @dev:	GPIO consumer
+ * @fwnode:	firmware node containing GPIO reference
+ * @con_id:	function within the GPIO consumer
+ * @index:	index of the GPIO to obtain in the consumer
+ * @flags:	GPIO initialization flags
+ * @label:	label to attach to the requested GPIO
+ *
+ * GPIO descriptors returned from this function are automatically disposed on
+ * driver detach.
+ *
+ * On successful request the GPIO pin is configured in accordance with
+ * provided @flags.
+ */
+struct gpio_desc *devm_fwnode_gpiod_get_index(struct device *dev,
+					      struct fwnode_handle *fwnode,
+					      const char *con_id, int index,
+					      enum gpiod_flags flags,
+					      const char *label)
+{
+	struct gpio_desc **dr;
+	struct gpio_desc *desc;
+
+	dr = devres_alloc(devm_gpiod_release, sizeof(struct gpio_desc *),
+			  GFP_KERNEL);
+	if (!dr)
+		return ERR_PTR(-ENOMEM);
+
+	desc = fwnode_gpiod_get_index(fwnode, con_id, index, flags, label);
+	if (IS_ERR(desc)) {
+		devres_free(dr);
+		return desc;
+	}
+
+	*dr = desc;
+	devres_add(dev, dr);
+
+	return desc;
+}
+EXPORT_SYMBOL_GPL(devm_fwnode_gpiod_get_index);
+
+/**
+ * devm_gpiod_get_index_optional - Resource-managed gpiod_get_index_optional()
+ * @dev: GPIO consumer
+ * @con_id: function within the GPIO consumer
+ * @index: index of the GPIO to obtain in the consumer
+ * @flags: optional GPIO initialization flags
+ *
+ * Managed gpiod_get_index_optional(). GPIO descriptors returned from this
+ * function are automatically disposed on driver detach. See
+ * gpiod_get_index_optional() for detailed information about behavior and
+ * return values.
+ */
+struct gpio_desc *__must_check devm_gpiod_get_index_optional(struct device *dev,
+							     const char *con_id,
+							     unsigned int index,
+							     enum gpiod_flags flags)
+{
+	struct gpio_desc *desc;
+
+	desc = devm_gpiod_get_index(dev, con_id, index, flags);
+	if (IS_ERR(desc)) {
+		if (PTR_ERR(desc) == -ENOENT)
+			return NULL;
+	}
+
+	return desc;
+}
+EXPORT_SYMBOL_GPL(devm_gpiod_get_index_optional);
+
+/**
+ * devm_gpiod_get_array - Resource-managed gpiod_get_array()
+ * @dev:	GPIO consumer
+ * @con_id:	function within the GPIO consumer
+ * @flags:	optional GPIO initialization flags
+ *
+ * Managed gpiod_get_array(). GPIO descriptors returned from this function are
+ * automatically disposed on driver detach. See gpiod_get_array() for detailed
+ * information about behavior and return values.
+ */
+struct gpio_descs *__must_check devm_gpiod_get_array(struct device *dev,
+						     const char *con_id,
+						     enum gpiod_flags flags)
+{
+	struct gpio_descs **dr;
+	struct gpio_descs *descs;
+
+	dr = devres_alloc(devm_gpiod_release_array,
+			  sizeof(struct gpio_descs *), GFP_KERNEL);
+	if (!dr)
+		return ERR_PTR(-ENOMEM);
+
+	descs = gpiod_get_array(dev, con_id, flags);
+	if (IS_ERR(descs)) {
+		devres_free(dr);
+		return descs;
+	}
+
+	*dr = descs;
+	devres_add(dev, dr);
+
+	return descs;
+}
+EXPORT_SYMBOL_GPL(devm_gpiod_get_array);
+
+/**
+ * devm_gpiod_get_array_optional - Resource-managed gpiod_get_array_optional()
+ * @dev:	GPIO consumer
+ * @con_id:	function within the GPIO consumer
+ * @flags:	optional GPIO initialization flags
+ *
+ * Managed gpiod_get_array_optional(). GPIO descriptors returned from this
+ * function are automatically disposed on driver detach.
+ * See gpiod_get_array_optional() for detailed information about behavior and
+ * return values.
+ */
+struct gpio_descs *__must_check
+devm_gpiod_get_array_optional(struct device *dev, const char *con_id,
+			      enum gpiod_flags flags)
+{
+	struct gpio_descs *descs;
+
+	descs = devm_gpiod_get_array(dev, con_id, flags);
+	if (PTR_ERR(descs) == -ENOENT)
+		return NULL;
+
+	return descs;
+}
+EXPORT_SYMBOL_GPL(devm_gpiod_get_array_optional);
+
+/**
+ * devm_gpiod_put - Resource-managed gpiod_put()
+ * @dev:	GPIO consumer
+ * @desc:	GPIO descriptor to dispose of
+ *
+ * Dispose of a GPIO descriptor obtained with devm_gpiod_get() or
+ * devm_gpiod_get_index(). Normally this function will not be called as the GPIO
+ * will be disposed of by the resource management code.
+ */
+void devm_gpiod_put(struct device *dev, struct gpio_desc *desc)
+{
+	WARN_ON(devres_release(dev, devm_gpiod_release, devm_gpiod_match,
+		&desc));
+}
+EXPORT_SYMBOL_GPL(devm_gpiod_put);
+
+/**
+ * devm_gpiod_unhinge - Remove resource management from a gpio descriptor
+ * @dev:	GPIO consumer
+ * @desc:	GPIO descriptor to remove resource management from
+ *
+ * Remove resource management from a GPIO descriptor. This is needed when
+ * you want to hand over lifecycle management of a descriptor to another
+ * mechanism.
+ */
+
+void devm_gpiod_unhinge(struct device *dev, struct gpio_desc *desc)
+{
+	int ret;
+
+	if (IS_ERR_OR_NULL(desc))
+		return;
+	ret = devres_destroy(dev, devm_gpiod_release,
+			     devm_gpiod_match, &desc);
+	/*
+	 * If the GPIO descriptor is requested as nonexclusive, we
+	 * may call this function several times on the same descriptor
+	 * so it is OK if devres_destroy() returns -ENOENT.
+	 */
+	if (ret == -ENOENT)
+		return;
+	/* Anything else we should warn about */
+	WARN_ON(ret);
+}
+EXPORT_SYMBOL_GPL(devm_gpiod_unhinge);
+
+/**
+ * devm_gpiod_put_array - Resource-managed gpiod_put_array()
+ * @dev:	GPIO consumer
+ * @descs:	GPIO descriptor array to dispose of
+ *
+ * Dispose of an array of GPIO descriptors obtained with devm_gpiod_get_array().
+ * Normally this function will not be called as the GPIOs will be disposed of
+ * by the resource management code.
+ */
+void devm_gpiod_put_array(struct device *dev, struct gpio_descs *descs)
+{
+	WARN_ON(devres_release(dev, devm_gpiod_release_array,
+			       devm_gpiod_match_array, &descs));
+}
+EXPORT_SYMBOL_GPL(devm_gpiod_put_array);
+
+
+
+
+static void devm_gpio_release(struct device *dev, void *res)
+{
+	unsigned *gpio = res;
+
+	gpio_free(*gpio);
+}
+
+static int devm_gpio_match(struct device *dev, void *res, void *data)
+{
+	unsigned *this = res, *gpio = data;
+
+	return *this == *gpio;
+}
+
+/**
+ *      devm_gpio_request - request a GPIO for a managed device
+ *      @dev: device to request the GPIO for
+ *      @gpio: GPIO to allocate
+ *      @label: the name of the requested GPIO
+ *
+ *      Except for the extra @dev argument, this function takes the
+ *      same arguments and performs the same function as
+ *      gpio_request().  GPIOs requested with this function will be
+ *      automatically freed on driver detach.
+ *
+ *      If an GPIO allocated with this function needs to be freed
+ *      separately, devm_gpio_free() must be used.
+ */
+
+int devm_gpio_request(struct device *dev, unsigned gpio, const char *label)
+{
+	unsigned *dr;
+	int rc;
+
+	dr = devres_alloc(devm_gpio_release, sizeof(unsigned), GFP_KERNEL);
+	if (!dr)
+		return -ENOMEM;
+
+	rc = gpio_request(gpio, label);
+	if (rc) {
+		devres_free(dr);
+		return rc;
+	}
+
+	*dr = gpio;
+	devres_add(dev, dr);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(devm_gpio_request);
+
+/**
+ *	devm_gpio_request_one - request a single GPIO with initial setup
+ *	@dev:   device to request for
+ *	@gpio:	the GPIO number
+ *	@flags:	GPIO configuration as specified by GPIOF_*
+ *	@label:	a literal description string of this GPIO
+ */
+int devm_gpio_request_one(struct device *dev, unsigned gpio,
+			  unsigned long flags, const char *label)
+{
+	unsigned *dr;
+	int rc;
+
+	dr = devres_alloc(devm_gpio_release, sizeof(unsigned), GFP_KERNEL);
+	if (!dr)
+		return -ENOMEM;
+
+	rc = gpio_request_one(gpio, flags, label);
+	if (rc) {
+		devres_free(dr);
+		return rc;
+	}
+
+	*dr = gpio;
+	devres_add(dev, dr);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(devm_gpio_request_one);
+
+/**
+ *      devm_gpio_free - free a GPIO
+ *      @dev: device to free GPIO for
+ *      @gpio: GPIO to free
+ *
+ *      Except for the extra @dev argument, this function takes the
+ *      same arguments and performs the same function as gpio_free().
+ *      This function instead of gpio_free() should be used to manually
+ *      free GPIOs allocated with devm_gpio_request().
+ */
+void devm_gpio_free(struct device *dev, unsigned int gpio)
+{
+
+	WARN_ON(devres_release(dev, devm_gpio_release, devm_gpio_match,
+		&gpio));
+}
+EXPORT_SYMBOL_GPL(devm_gpio_free);
+
+static void devm_gpio_chip_release(struct device *dev, void *res)
+{
+	struct gpio_chip *gc = *(struct gpio_chip **)res;
+
+	gpiochip_remove(gc);
+}
+
+/**
+ * devm_gpiochip_add_data_with_key() - Resource managed gpiochip_add_data_with_key()
+ * @dev: pointer to the device that gpio_chip belongs to.
+ * @gc: the GPIO chip to register
+ * @data: driver-private data associated with this chip
+ * @lock_key: lockdep class for IRQ lock
+ * @request_key: lockdep class for IRQ request
+ *
+ * Context: potentially before irqs will work
+ *
+ * The gpio chip automatically be released when the device is unbound.
+ *
+ * Returns:
+ * A negative errno if the chip can't be registered, such as because the
+ * gc->base is invalid or already associated with a different chip.
+ * Otherwise it returns zero as a success code.
+ */
+int devm_gpiochip_add_data_with_key(struct device *dev, struct gpio_chip *gc, void *data,
+				    struct lock_class_key *lock_key,
+				    struct lock_class_key *request_key)
+{
+	struct gpio_chip **ptr;
+	int ret;
+
+	ptr = devres_alloc(devm_gpio_chip_release, sizeof(*ptr),
+			     GFP_KERNEL);
+	if (!ptr)
+		return -ENOMEM;
+
+	ret = gpiochip_add_data_with_key(gc, data, lock_key, request_key);
+	if (ret < 0) {
+		devres_free(ptr);
+		return ret;
+	}
+
+	*ptr = gc;
+	devres_add(dev, ptr);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(devm_gpiochip_add_data_with_key);
diff --git a/drivers/gpio/gpiolib-legacy.c b/drivers/gpio/gpiolib-legacy.c
new file mode 100644
index 000000000..30e2476a6
--- /dev/null
+++ b/drivers/gpio/gpiolib-legacy.c
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/gpio/consumer.h>
+#include <linux/gpio/driver.h>
+
+#include <linux/gpio.h>
+
+#include "gpiolib.h"
+
+void gpio_free(unsigned gpio)
+{
+	gpiod_free(gpio_to_desc(gpio));
+}
+EXPORT_SYMBOL_GPL(gpio_free);
+
+/**
+ * gpio_request_one - request a single GPIO with initial configuration
+ * @gpio:	the GPIO number
+ * @flags:	GPIO configuration as specified by GPIOF_*
+ * @label:	a literal description string of this GPIO
+ */
+int gpio_request_one(unsigned gpio, unsigned long flags, const char *label)
+{
+	struct gpio_desc *desc;
+	int err;
+
+	desc = gpio_to_desc(gpio);
+
+	/* Compatibility: assume unavailable "valid" GPIOs will appear later */
+	if (!desc && gpio_is_valid(gpio))
+		return -EPROBE_DEFER;
+
+	err = gpiod_request(desc, label);
+	if (err)
+		return err;
+
+	if (flags & GPIOF_OPEN_DRAIN)
+		set_bit(FLAG_OPEN_DRAIN, &desc->flags);
+
+	if (flags & GPIOF_OPEN_SOURCE)
+		set_bit(FLAG_OPEN_SOURCE, &desc->flags);
+
+	if (flags & GPIOF_ACTIVE_LOW)
+		set_bit(FLAG_ACTIVE_LOW, &desc->flags);
+
+	if (flags & GPIOF_DIR_IN)
+		err = gpiod_direction_input(desc);
+	else
+		err = gpiod_direction_output_raw(desc,
+				(flags & GPIOF_INIT_HIGH) ? 1 : 0);
+
+	if (err)
+		goto free_gpio;
+
+	if (flags & GPIOF_EXPORT) {
+		err = gpiod_export(desc, flags & GPIOF_EXPORT_CHANGEABLE);
+		if (err)
+			goto free_gpio;
+	}
+
+	return 0;
+
+ free_gpio:
+	gpiod_free(desc);
+	return err;
+}
+EXPORT_SYMBOL_GPL(gpio_request_one);
+
+int gpio_request(unsigned gpio, const char *label)
+{
+	struct gpio_desc *desc = gpio_to_desc(gpio);
+
+	/* Compatibility: assume unavailable "valid" GPIOs will appear later */
+	if (!desc && gpio_is_valid(gpio))
+		return -EPROBE_DEFER;
+
+	return gpiod_request(desc, label);
+}
+EXPORT_SYMBOL_GPL(gpio_request);
+
+/**
+ * gpio_request_array - request multiple GPIOs in a single call
+ * @array:	array of the 'struct gpio'
+ * @num:	how many GPIOs in the array
+ */
+int gpio_request_array(const struct gpio *array, size_t num)
+{
+	int i, err;
+
+	for (i = 0; i < num; i++, array++) {
+		err = gpio_request_one(array->gpio, array->flags, array->label);
+		if (err)
+			goto err_free;
+	}
+	return 0;
+
+err_free:
+	while (i--)
+		gpio_free((--array)->gpio);
+	return err;
+}
+EXPORT_SYMBOL_GPL(gpio_request_array);
+
+/**
+ * gpio_free_array - release multiple GPIOs in a single call
+ * @array:	array of the 'struct gpio'
+ * @num:	how many GPIOs in the array
+ */
+void gpio_free_array(const struct gpio *array, size_t num)
+{
+	while (num--)
+		gpio_free((array++)->gpio);
+}
+EXPORT_SYMBOL_GPL(gpio_free_array);
diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
new file mode 100644
index 000000000..2e63274a4
--- /dev/null
+++ b/drivers/gpio/gpiolib-of.c
@@ -0,0 +1,1048 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * OF helpers for the GPIO API
+ *
+ * Copyright (c) 2007-2008  MontaVista Software, Inc.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ */
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/gpio/consumer.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_gpio.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/slab.h>
+#include <linux/gpio/machine.h>
+
+#include "gpiolib.h"
+#include "gpiolib-of.h"
+
+/**
+ * of_gpio_spi_cs_get_count() - special GPIO counting for SPI
+ * @dev:    Consuming device
+ * @con_id: Function within the GPIO consumer
+ *
+ * Some elder GPIO controllers need special quirks. Currently we handle
+ * the Freescale and PPC GPIO controller with bindings that doesn't use the
+ * established "cs-gpios" for chip selects but instead rely on
+ * "gpios" for the chip select lines. If we detect this, we redirect
+ * the counting of "cs-gpios" to count "gpios" transparent to the
+ * driver.
+ */
+static int of_gpio_spi_cs_get_count(struct device *dev, const char *con_id)
+{
+	struct device_node *np = dev->of_node;
+
+	if (!IS_ENABLED(CONFIG_SPI_MASTER))
+		return 0;
+	if (!con_id || strcmp(con_id, "cs"))
+		return 0;
+	if (!of_device_is_compatible(np, "fsl,spi") &&
+	    !of_device_is_compatible(np, "aeroflexgaisler,spictrl") &&
+	    !of_device_is_compatible(np, "ibm,ppc4xx-spi"))
+		return 0;
+	return of_gpio_named_count(np, "gpios");
+}
+
+/*
+ * This is used by external users of of_gpio_count() from <linux/of_gpio.h>
+ *
+ * FIXME: get rid of those external users by converting them to GPIO
+ * descriptors and let them all use gpiod_count()
+ */
+int of_gpio_get_count(struct device *dev, const char *con_id)
+{
+	int ret;
+	char propname[32];
+	unsigned int i;
+
+	ret = of_gpio_spi_cs_get_count(dev, con_id);
+	if (ret > 0)
+		return ret;
+
+	for (i = 0; i < ARRAY_SIZE(gpio_suffixes); i++) {
+		if (con_id)
+			snprintf(propname, sizeof(propname), "%s-%s",
+				 con_id, gpio_suffixes[i]);
+		else
+			snprintf(propname, sizeof(propname), "%s",
+				 gpio_suffixes[i]);
+
+		ret = of_gpio_named_count(dev->of_node, propname);
+		if (ret > 0)
+			break;
+	}
+	return ret ? ret : -ENOENT;
+}
+
+static int of_gpiochip_match_node_and_xlate(struct gpio_chip *chip, void *data)
+{
+	struct of_phandle_args *gpiospec = data;
+
+	return chip->gpiodev->dev.of_node == gpiospec->np &&
+				chip->of_xlate &&
+				chip->of_xlate(chip, gpiospec, NULL) >= 0;
+}
+
+static struct gpio_chip *of_find_gpiochip_by_xlate(
+					struct of_phandle_args *gpiospec)
+{
+	return gpiochip_find(gpiospec, of_gpiochip_match_node_and_xlate);
+}
+
+static struct gpio_desc *of_xlate_and_get_gpiod_flags(struct gpio_chip *chip,
+					struct of_phandle_args *gpiospec,
+					enum of_gpio_flags *flags)
+{
+	int ret;
+
+	if (chip->of_gpio_n_cells != gpiospec->args_count)
+		return ERR_PTR(-EINVAL);
+
+	ret = chip->of_xlate(chip, gpiospec, flags);
+	if (ret < 0)
+		return ERR_PTR(ret);
+
+	return gpiochip_get_desc(chip, ret);
+}
+
+/**
+ * of_gpio_need_valid_mask() - figure out if the OF GPIO driver needs
+ * to set the .valid_mask
+ * @gc: the target gpio_chip
+ *
+ * Return: true if the valid mask needs to be set
+ */
+bool of_gpio_need_valid_mask(const struct gpio_chip *gc)
+{
+	int size;
+	struct device_node *np = gc->of_node;
+
+	size = of_property_count_u32_elems(np,  "gpio-reserved-ranges");
+	if (size > 0 && size % 2 == 0)
+		return true;
+	return false;
+}
+
+static void of_gpio_flags_quirks(struct device_node *np,
+				 const char *propname,
+				 enum of_gpio_flags *flags,
+				 int index)
+{
+	/*
+	 * Some GPIO fixed regulator quirks.
+	 * Note that active low is the default.
+	 */
+	if (IS_ENABLED(CONFIG_REGULATOR) &&
+	    (of_device_is_compatible(np, "regulator-fixed") ||
+	     of_device_is_compatible(np, "reg-fixed-voltage") ||
+	     (!(strcmp(propname, "enable-gpio") &&
+		strcmp(propname, "enable-gpios")) &&
+	      of_device_is_compatible(np, "regulator-gpio")))) {
+		bool active_low = !of_property_read_bool(np,
+							 "enable-active-high");
+		/*
+		 * The regulator GPIO handles are specified such that the
+		 * presence or absence of "enable-active-high" solely controls
+		 * the polarity of the GPIO line. Any phandle flags must
+		 * be actively ignored.
+		 */
+		if ((*flags & OF_GPIO_ACTIVE_LOW) && !active_low) {
+			pr_warn("%s GPIO handle specifies active low - ignored\n",
+				of_node_full_name(np));
+			*flags &= ~OF_GPIO_ACTIVE_LOW;
+		}
+		if (active_low)
+			*flags |= OF_GPIO_ACTIVE_LOW;
+	}
+	/*
+	 * Legacy open drain handling for fixed voltage regulators.
+	 */
+	if (IS_ENABLED(CONFIG_REGULATOR) &&
+	    of_device_is_compatible(np, "reg-fixed-voltage") &&
+	    of_property_read_bool(np, "gpio-open-drain")) {
+		*flags |= (OF_GPIO_SINGLE_ENDED | OF_GPIO_OPEN_DRAIN);
+		pr_info("%s uses legacy open drain flag - update the DTS if you can\n",
+			of_node_full_name(np));
+	}
+
+	/*
+	 * Legacy handling of SPI active high chip select. If we have a
+	 * property named "cs-gpios" we need to inspect the child node
+	 * to determine if the flags should have inverted semantics.
+	 */
+	if (IS_ENABLED(CONFIG_SPI_MASTER) && !strcmp(propname, "cs-gpios") &&
+	    of_property_read_bool(np, "cs-gpios")) {
+		struct device_node *child;
+		u32 cs;
+		int ret;
+
+		for_each_child_of_node(np, child) {
+			ret = of_property_read_u32(child, "reg", &cs);
+			if (ret)
+				continue;
+			if (cs == index) {
+				/*
+				 * SPI children have active low chip selects
+				 * by default. This can be specified negatively
+				 * by just omitting "spi-cs-high" in the
+				 * device node, or actively by tagging on
+				 * GPIO_ACTIVE_LOW as flag in the device
+				 * tree. If the line is simultaneously
+				 * tagged as active low in the device tree
+				 * and has the "spi-cs-high" set, we get a
+				 * conflict and the "spi-cs-high" flag will
+				 * take precedence.
+				 */
+				if (of_property_read_bool(child, "spi-cs-high")) {
+					if (*flags & OF_GPIO_ACTIVE_LOW) {
+						pr_warn("%s GPIO handle specifies active low - ignored\n",
+							of_node_full_name(child));
+						*flags &= ~OF_GPIO_ACTIVE_LOW;
+					}
+				} else {
+					if (!(*flags & OF_GPIO_ACTIVE_LOW))
+						pr_info("%s enforce active low on chipselect handle\n",
+							of_node_full_name(child));
+					*flags |= OF_GPIO_ACTIVE_LOW;
+				}
+				of_node_put(child);
+				break;
+			}
+		}
+	}
+
+	/* Legacy handling of stmmac's active-low PHY reset line */
+	if (IS_ENABLED(CONFIG_STMMAC_ETH) &&
+	    !strcmp(propname, "snps,reset-gpio") &&
+	    of_property_read_bool(np, "snps,reset-active-low"))
+		*flags |= OF_GPIO_ACTIVE_LOW;
+}
+
+/**
+ * of_get_named_gpiod_flags() - Get a GPIO descriptor and flags for GPIO API
+ * @np:		device node to get GPIO from
+ * @propname:	property name containing gpio specifier(s)
+ * @index:	index of the GPIO
+ * @flags:	a flags pointer to fill in
+ *
+ * Returns GPIO descriptor to use with Linux GPIO API, or one of the errno
+ * value on the error condition. If @flags is not NULL the function also fills
+ * in flags for the GPIO.
+ */
+static struct gpio_desc *of_get_named_gpiod_flags(struct device_node *np,
+		     const char *propname, int index, enum of_gpio_flags *flags)
+{
+	struct of_phandle_args gpiospec;
+	struct gpio_chip *chip;
+	struct gpio_desc *desc;
+	int ret;
+
+	ret = of_parse_phandle_with_args_map(np, propname, "gpio", index,
+					     &gpiospec);
+	if (ret) {
+		pr_debug("%s: can't parse '%s' property of node '%pOF[%d]'\n",
+			__func__, propname, np, index);
+		return ERR_PTR(ret);
+	}
+
+	chip = of_find_gpiochip_by_xlate(&gpiospec);
+	if (!chip) {
+		desc = ERR_PTR(-EPROBE_DEFER);
+		goto out;
+	}
+
+	desc = of_xlate_and_get_gpiod_flags(chip, &gpiospec, flags);
+	if (IS_ERR(desc))
+		goto out;
+
+	if (flags)
+		of_gpio_flags_quirks(np, propname, flags, index);
+
+	pr_debug("%s: parsed '%s' property of node '%pOF[%d]' - status (%d)\n",
+		 __func__, propname, np, index,
+		 PTR_ERR_OR_ZERO(desc));
+
+out:
+	of_node_put(gpiospec.np);
+
+	return desc;
+}
+
+int of_get_named_gpio_flags(struct device_node *np, const char *list_name,
+			    int index, enum of_gpio_flags *flags)
+{
+	struct gpio_desc *desc;
+
+	desc = of_get_named_gpiod_flags(np, list_name, index, flags);
+
+	if (IS_ERR(desc))
+		return PTR_ERR(desc);
+	else
+		return desc_to_gpio(desc);
+}
+EXPORT_SYMBOL_GPL(of_get_named_gpio_flags);
+
+/**
+ * gpiod_get_from_of_node() - obtain a GPIO from an OF node
+ * @node:	handle of the OF node
+ * @propname:	name of the DT property representing the GPIO
+ * @index:	index of the GPIO to obtain for the consumer
+ * @dflags:	GPIO initialization flags
+ * @label:	label to attach to the requested GPIO
+ *
+ * Returns:
+ * On successful request the GPIO pin is configured in accordance with
+ * provided @dflags.
+ *
+ * In case of error an ERR_PTR() is returned.
+ */
+struct gpio_desc *gpiod_get_from_of_node(struct device_node *node,
+					 const char *propname, int index,
+					 enum gpiod_flags dflags,
+					 const char *label)
+{
+	unsigned long lflags = GPIO_LOOKUP_FLAGS_DEFAULT;
+	struct gpio_desc *desc;
+	enum of_gpio_flags flags;
+	bool active_low = false;
+	bool single_ended = false;
+	bool open_drain = false;
+	bool transitory = false;
+	int ret;
+
+	desc = of_get_named_gpiod_flags(node, propname,
+					index, &flags);
+
+	if (!desc || IS_ERR(desc)) {
+		return desc;
+	}
+
+	active_low = flags & OF_GPIO_ACTIVE_LOW;
+	single_ended = flags & OF_GPIO_SINGLE_ENDED;
+	open_drain = flags & OF_GPIO_OPEN_DRAIN;
+	transitory = flags & OF_GPIO_TRANSITORY;
+
+	ret = gpiod_request(desc, label);
+	if (ret == -EBUSY && (dflags & GPIOD_FLAGS_BIT_NONEXCLUSIVE))
+		return desc;
+	if (ret)
+		return ERR_PTR(ret);
+
+	if (active_low)
+		lflags |= GPIO_ACTIVE_LOW;
+
+	if (single_ended) {
+		if (open_drain)
+			lflags |= GPIO_OPEN_DRAIN;
+		else
+			lflags |= GPIO_OPEN_SOURCE;
+	}
+
+	if (transitory)
+		lflags |= GPIO_TRANSITORY;
+
+	if (flags & OF_GPIO_PULL_UP)
+		lflags |= GPIO_PULL_UP;
+
+	if (flags & OF_GPIO_PULL_DOWN)
+		lflags |= GPIO_PULL_DOWN;
+
+	ret = gpiod_configure_flags(desc, propname, lflags, dflags);
+	if (ret < 0) {
+		gpiod_put(desc);
+		return ERR_PTR(ret);
+	}
+
+	return desc;
+}
+EXPORT_SYMBOL_GPL(gpiod_get_from_of_node);
+
+/*
+ * The SPI GPIO bindings happened before we managed to establish that GPIO
+ * properties should be named "foo-gpios" so we have this special kludge for
+ * them.
+ */
+static struct gpio_desc *of_find_spi_gpio(struct device *dev, const char *con_id,
+					  enum of_gpio_flags *of_flags)
+{
+	char prop_name[32]; /* 32 is max size of property name */
+	struct device_node *np = dev->of_node;
+	struct gpio_desc *desc;
+
+	/*
+	 * Hopefully the compiler stubs the rest of the function if this
+	 * is false.
+	 */
+	if (!IS_ENABLED(CONFIG_SPI_MASTER))
+		return ERR_PTR(-ENOENT);
+
+	/* Allow this specifically for "spi-gpio" devices */
+	if (!of_device_is_compatible(np, "spi-gpio") || !con_id)
+		return ERR_PTR(-ENOENT);
+
+	/* Will be "gpio-sck", "gpio-mosi" or "gpio-miso" */
+	snprintf(prop_name, sizeof(prop_name), "%s-%s", "gpio", con_id);
+
+	desc = of_get_named_gpiod_flags(np, prop_name, 0, of_flags);
+	return desc;
+}
+
+/*
+ * The old Freescale bindings use simply "gpios" as name for the chip select
+ * lines rather than "cs-gpios" like all other SPI hardware. Account for this
+ * with a special quirk.
+ */
+static struct gpio_desc *of_find_spi_cs_gpio(struct device *dev,
+					     const char *con_id,
+					     unsigned int idx,
+					     unsigned long *flags)
+{
+	struct device_node *np = dev->of_node;
+
+	if (!IS_ENABLED(CONFIG_SPI_MASTER))
+		return ERR_PTR(-ENOENT);
+
+	/* Allow this specifically for Freescale and PPC devices */
+	if (!of_device_is_compatible(np, "fsl,spi") &&
+	    !of_device_is_compatible(np, "aeroflexgaisler,spictrl") &&
+	    !of_device_is_compatible(np, "ibm,ppc4xx-spi"))
+		return ERR_PTR(-ENOENT);
+	/* Allow only if asking for "cs-gpios" */
+	if (!con_id || strcmp(con_id, "cs"))
+		return ERR_PTR(-ENOENT);
+
+	/*
+	 * While all other SPI controllers use "cs-gpios" the Freescale
+	 * uses just "gpios" so translate to that when "cs-gpios" is
+	 * requested.
+	 */
+	return of_find_gpio(dev, NULL, idx, flags);
+}
+
+/*
+ * Some regulator bindings happened before we managed to establish that GPIO
+ * properties should be named "foo-gpios" so we have this special kludge for
+ * them.
+ */
+static struct gpio_desc *of_find_regulator_gpio(struct device *dev, const char *con_id,
+						enum of_gpio_flags *of_flags)
+{
+	/* These are the connection IDs we accept as legacy GPIO phandles */
+	const char *whitelist[] = {
+		"wlf,ldoena", /* Arizona */
+		"wlf,ldo1ena", /* WM8994 */
+		"wlf,ldo2ena", /* WM8994 */
+	};
+	struct device_node *np = dev->of_node;
+	struct gpio_desc *desc;
+	int i;
+
+	if (!IS_ENABLED(CONFIG_REGULATOR))
+		return ERR_PTR(-ENOENT);
+
+	if (!con_id)
+		return ERR_PTR(-ENOENT);
+
+	i = match_string(whitelist, ARRAY_SIZE(whitelist), con_id);
+	if (i < 0)
+		return ERR_PTR(-ENOENT);
+
+	desc = of_get_named_gpiod_flags(np, con_id, 0, of_flags);
+	return desc;
+}
+
+static struct gpio_desc *of_find_arizona_gpio(struct device *dev,
+					      const char *con_id,
+					      enum of_gpio_flags *of_flags)
+{
+	if (!IS_ENABLED(CONFIG_MFD_ARIZONA))
+		return ERR_PTR(-ENOENT);
+
+	if (!con_id || strcmp(con_id, "wlf,reset"))
+		return ERR_PTR(-ENOENT);
+
+	return of_get_named_gpiod_flags(dev->of_node, con_id, 0, of_flags);
+}
+
+static struct gpio_desc *of_find_usb_gpio(struct device *dev,
+					  const char *con_id,
+					  enum of_gpio_flags *of_flags)
+{
+	/*
+	 * Currently this USB quirk is only for the Fairchild FUSB302 host which is using
+	 * an undocumented DT GPIO line named "fcs,int_n" without the compulsory "-gpios"
+	 * suffix.
+	 */
+	if (!IS_ENABLED(CONFIG_TYPEC_FUSB302))
+		return ERR_PTR(-ENOENT);
+
+	if (!con_id || strcmp(con_id, "fcs,int_n"))
+		return ERR_PTR(-ENOENT);
+
+	return of_get_named_gpiod_flags(dev->of_node, con_id, 0, of_flags);
+}
+
+struct gpio_desc *of_find_gpio(struct device *dev, const char *con_id,
+			       unsigned int idx, unsigned long *flags)
+{
+	char prop_name[32]; /* 32 is max size of property name */
+	enum of_gpio_flags of_flags;
+	struct gpio_desc *desc;
+	unsigned int i;
+
+	/* Try GPIO property "foo-gpios" and "foo-gpio" */
+	for (i = 0; i < ARRAY_SIZE(gpio_suffixes); i++) {
+		if (con_id)
+			snprintf(prop_name, sizeof(prop_name), "%s-%s", con_id,
+				 gpio_suffixes[i]);
+		else
+			snprintf(prop_name, sizeof(prop_name), "%s",
+				 gpio_suffixes[i]);
+
+		desc = of_get_named_gpiod_flags(dev->of_node, prop_name, idx,
+						&of_flags);
+
+		if (!IS_ERR(desc) || PTR_ERR(desc) != -ENOENT)
+			break;
+	}
+
+	if (PTR_ERR(desc) == -ENOENT) {
+		/* Special handling for SPI GPIOs if used */
+		desc = of_find_spi_gpio(dev, con_id, &of_flags);
+	}
+
+	if (PTR_ERR(desc) == -ENOENT) {
+		/* This quirk looks up flags and all */
+		desc = of_find_spi_cs_gpio(dev, con_id, idx, flags);
+		if (!IS_ERR(desc))
+			return desc;
+	}
+
+	if (PTR_ERR(desc) == -ENOENT) {
+		/* Special handling for regulator GPIOs if used */
+		desc = of_find_regulator_gpio(dev, con_id, &of_flags);
+	}
+
+	if (PTR_ERR(desc) == -ENOENT)
+		desc = of_find_arizona_gpio(dev, con_id, &of_flags);
+
+	if (PTR_ERR(desc) == -ENOENT)
+		desc = of_find_usb_gpio(dev, con_id, &of_flags);
+
+	if (IS_ERR(desc))
+		return desc;
+
+	if (of_flags & OF_GPIO_ACTIVE_LOW)
+		*flags |= GPIO_ACTIVE_LOW;
+
+	if (of_flags & OF_GPIO_SINGLE_ENDED) {
+		if (of_flags & OF_GPIO_OPEN_DRAIN)
+			*flags |= GPIO_OPEN_DRAIN;
+		else
+			*flags |= GPIO_OPEN_SOURCE;
+	}
+
+	if (of_flags & OF_GPIO_TRANSITORY)
+		*flags |= GPIO_TRANSITORY;
+
+	if (of_flags & OF_GPIO_PULL_UP)
+		*flags |= GPIO_PULL_UP;
+	if (of_flags & OF_GPIO_PULL_DOWN)
+		*flags |= GPIO_PULL_DOWN;
+
+	return desc;
+}
+
+/**
+ * of_parse_own_gpio() - Get a GPIO hog descriptor, names and flags for GPIO API
+ * @np:		device node to get GPIO from
+ * @chip:	GPIO chip whose hog is parsed
+ * @idx:	Index of the GPIO to parse
+ * @name:	GPIO line name
+ * @lflags:	bitmask of gpio_lookup_flags GPIO_* values - returned from
+ *		of_find_gpio() or of_parse_own_gpio()
+ * @dflags:	gpiod_flags - optional GPIO initialization flags
+ *
+ * Returns GPIO descriptor to use with Linux GPIO API, or one of the errno
+ * value on the error condition.
+ */
+static struct gpio_desc *of_parse_own_gpio(struct device_node *np,
+					   struct gpio_chip *chip,
+					   unsigned int idx, const char **name,
+					   unsigned long *lflags,
+					   enum gpiod_flags *dflags)
+{
+	struct device_node *chip_np;
+	enum of_gpio_flags xlate_flags;
+	struct of_phandle_args gpiospec;
+	struct gpio_desc *desc;
+	unsigned int i;
+	u32 tmp;
+	int ret;
+
+	chip_np = chip->of_node;
+	if (!chip_np)
+		return ERR_PTR(-EINVAL);
+
+	xlate_flags = 0;
+	*lflags = GPIO_LOOKUP_FLAGS_DEFAULT;
+	*dflags = 0;
+
+	ret = of_property_read_u32(chip_np, "#gpio-cells", &tmp);
+	if (ret)
+		return ERR_PTR(ret);
+
+	gpiospec.np = chip_np;
+	gpiospec.args_count = tmp;
+
+	for (i = 0; i < tmp; i++) {
+		ret = of_property_read_u32_index(np, "gpios", idx * tmp + i,
+						 &gpiospec.args[i]);
+		if (ret)
+			return ERR_PTR(ret);
+	}
+
+	desc = of_xlate_and_get_gpiod_flags(chip, &gpiospec, &xlate_flags);
+	if (IS_ERR(desc))
+		return desc;
+
+	if (xlate_flags & OF_GPIO_ACTIVE_LOW)
+		*lflags |= GPIO_ACTIVE_LOW;
+	if (xlate_flags & OF_GPIO_TRANSITORY)
+		*lflags |= GPIO_TRANSITORY;
+	if (xlate_flags & OF_GPIO_PULL_UP)
+		*lflags |= GPIO_PULL_UP;
+	if (xlate_flags & OF_GPIO_PULL_DOWN)
+		*lflags |= GPIO_PULL_DOWN;
+
+	if (of_property_read_bool(np, "input"))
+		*dflags |= GPIOD_IN;
+	else if (of_property_read_bool(np, "output-low"))
+		*dflags |= GPIOD_OUT_LOW;
+	else if (of_property_read_bool(np, "output-high"))
+		*dflags |= GPIOD_OUT_HIGH;
+	else {
+		pr_warn("GPIO line %d (%pOFn): no hogging state specified, bailing out\n",
+			desc_to_gpio(desc), np);
+		return ERR_PTR(-EINVAL);
+	}
+
+	if (name && of_property_read_string(np, "line-name", name))
+		*name = np->name;
+
+	return desc;
+}
+
+/**
+ * of_gpiochip_add_hog - Add all hogs in a hog device node
+ * @chip:	gpio chip to act on
+ * @hog:	device node describing the hogs
+ *
+ * Returns error if it fails otherwise 0 on success.
+ */
+static int of_gpiochip_add_hog(struct gpio_chip *chip, struct device_node *hog)
+{
+	enum gpiod_flags dflags;
+	struct gpio_desc *desc;
+	unsigned long lflags;
+	const char *name;
+	unsigned int i;
+	int ret;
+
+	for (i = 0;; i++) {
+		desc = of_parse_own_gpio(hog, chip, i, &name, &lflags, &dflags);
+		if (IS_ERR(desc))
+			break;
+
+		ret = gpiod_hog(desc, name, lflags, dflags);
+		if (ret < 0)
+			return ret;
+
+#ifdef CONFIG_OF_DYNAMIC
+		desc->hog = hog;
+#endif
+	}
+
+	return 0;
+}
+
+/**
+ * of_gpiochip_scan_gpios - Scan gpio-controller for gpio definitions
+ * @chip:	gpio chip to act on
+ *
+ * This is only used by of_gpiochip_add to request/set GPIO initial
+ * configuration.
+ * It returns error if it fails otherwise 0 on success.
+ */
+static int of_gpiochip_scan_gpios(struct gpio_chip *chip)
+{
+	struct device_node *np;
+	int ret;
+
+	for_each_available_child_of_node(chip->of_node, np) {
+		if (!of_property_read_bool(np, "gpio-hog"))
+			continue;
+
+		ret = of_gpiochip_add_hog(chip, np);
+		if (ret < 0) {
+			of_node_put(np);
+			return ret;
+		}
+
+		of_node_set_flag(np, OF_POPULATED);
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_OF_DYNAMIC
+/**
+ * of_gpiochip_remove_hog - Remove all hogs in a hog device node
+ * @chip:	gpio chip to act on
+ * @hog:	device node describing the hogs
+ */
+static void of_gpiochip_remove_hog(struct gpio_chip *chip,
+				   struct device_node *hog)
+{
+	struct gpio_desc *descs = chip->gpiodev->descs;
+	unsigned int i;
+
+	for (i = 0; i < chip->ngpio; i++) {
+		if (test_bit(FLAG_IS_HOGGED, &descs[i].flags) &&
+		    descs[i].hog == hog)
+			gpiochip_free_own_desc(&descs[i]);
+	}
+}
+
+static int of_gpiochip_match_node(struct gpio_chip *chip, void *data)
+{
+	return chip->gpiodev->dev.of_node == data;
+}
+
+static struct gpio_chip *of_find_gpiochip_by_node(struct device_node *np)
+{
+	return gpiochip_find(np, of_gpiochip_match_node);
+}
+
+static int of_gpio_notify(struct notifier_block *nb, unsigned long action,
+			  void *arg)
+{
+	struct of_reconfig_data *rd = arg;
+	struct gpio_chip *chip;
+	int ret;
+
+	/*
+	 * This only supports adding and removing complete gpio-hog nodes.
+	 * Modifying an existing gpio-hog node is not supported (except for
+	 * changing its "status" property, which is treated the same as
+	 * addition/removal).
+	 */
+	switch (of_reconfig_get_state_change(action, arg)) {
+	case OF_RECONFIG_CHANGE_ADD:
+		if (!of_property_read_bool(rd->dn, "gpio-hog"))
+			return NOTIFY_OK;	/* not for us */
+
+		if (of_node_test_and_set_flag(rd->dn, OF_POPULATED))
+			return NOTIFY_OK;
+
+		chip = of_find_gpiochip_by_node(rd->dn->parent);
+		if (chip == NULL)
+			return NOTIFY_OK;	/* not for us */
+
+		ret = of_gpiochip_add_hog(chip, rd->dn);
+		if (ret < 0) {
+			pr_err("%s: failed to add hogs for %pOF\n", __func__,
+			       rd->dn);
+			of_node_clear_flag(rd->dn, OF_POPULATED);
+			return notifier_from_errno(ret);
+		}
+		break;
+
+	case OF_RECONFIG_CHANGE_REMOVE:
+		if (!of_node_check_flag(rd->dn, OF_POPULATED))
+			return NOTIFY_OK;	/* already depopulated */
+
+		chip = of_find_gpiochip_by_node(rd->dn->parent);
+		if (chip == NULL)
+			return NOTIFY_OK;	/* not for us */
+
+		of_gpiochip_remove_hog(chip, rd->dn);
+		of_node_clear_flag(rd->dn, OF_POPULATED);
+		break;
+	}
+
+	return NOTIFY_OK;
+}
+
+struct notifier_block gpio_of_notifier = {
+	.notifier_call = of_gpio_notify,
+};
+#endif /* CONFIG_OF_DYNAMIC */
+
+/**
+ * of_gpio_simple_xlate - translate gpiospec to the GPIO number and flags
+ * @gc:		pointer to the gpio_chip structure
+ * @gpiospec:	GPIO specifier as found in the device tree
+ * @flags:	a flags pointer to fill in
+ *
+ * This is simple translation function, suitable for the most 1:1 mapped
+ * GPIO chips. This function performs only one sanity check: whether GPIO
+ * is less than ngpios (that is specified in the gpio_chip).
+ */
+static int of_gpio_simple_xlate(struct gpio_chip *gc,
+				const struct of_phandle_args *gpiospec,
+				u32 *flags)
+{
+	/*
+	 * We're discouraging gpio_cells < 2, since that way you'll have to
+	 * write your own xlate function (that will have to retrieve the GPIO
+	 * number and the flags from a single gpio cell -- this is possible,
+	 * but not recommended).
+	 */
+	if (gc->of_gpio_n_cells < 2) {
+		WARN_ON(1);
+		return -EINVAL;
+	}
+
+	if (WARN_ON(gpiospec->args_count < gc->of_gpio_n_cells))
+		return -EINVAL;
+
+	if (gpiospec->args[0] >= gc->ngpio)
+		return -EINVAL;
+
+	if (flags)
+		*flags = gpiospec->args[1];
+
+	return gpiospec->args[0];
+}
+
+/**
+ * of_mm_gpiochip_add_data - Add memory mapped GPIO chip (bank)
+ * @np:		device node of the GPIO chip
+ * @mm_gc:	pointer to the of_mm_gpio_chip allocated structure
+ * @data:	driver data to store in the struct gpio_chip
+ *
+ * To use this function you should allocate and fill mm_gc with:
+ *
+ * 1) In the gpio_chip structure:
+ *    - all the callbacks
+ *    - of_gpio_n_cells
+ *    - of_xlate callback (optional)
+ *
+ * 3) In the of_mm_gpio_chip structure:
+ *    - save_regs callback (optional)
+ *
+ * If succeeded, this function will map bank's memory and will
+ * do all necessary work for you. Then you'll able to use .regs
+ * to manage GPIOs from the callbacks.
+ */
+int of_mm_gpiochip_add_data(struct device_node *np,
+			    struct of_mm_gpio_chip *mm_gc,
+			    void *data)
+{
+	int ret = -ENOMEM;
+	struct gpio_chip *gc = &mm_gc->gc;
+
+	gc->label = kasprintf(GFP_KERNEL, "%pOF", np);
+	if (!gc->label)
+		goto err0;
+
+	mm_gc->regs = of_iomap(np, 0);
+	if (!mm_gc->regs)
+		goto err1;
+
+	gc->base = -1;
+
+	if (mm_gc->save_regs)
+		mm_gc->save_regs(mm_gc);
+
+	of_node_put(mm_gc->gc.of_node);
+	mm_gc->gc.of_node = of_node_get(np);
+
+	ret = gpiochip_add_data(gc, data);
+	if (ret)
+		goto err2;
+
+	return 0;
+err2:
+	of_node_put(np);
+	iounmap(mm_gc->regs);
+err1:
+	kfree(gc->label);
+err0:
+	pr_err("%pOF: GPIO chip registration failed with status %d\n", np, ret);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(of_mm_gpiochip_add_data);
+
+/**
+ * of_mm_gpiochip_remove - Remove memory mapped GPIO chip (bank)
+ * @mm_gc:	pointer to the of_mm_gpio_chip allocated structure
+ */
+void of_mm_gpiochip_remove(struct of_mm_gpio_chip *mm_gc)
+{
+	struct gpio_chip *gc = &mm_gc->gc;
+
+	if (!mm_gc)
+		return;
+
+	gpiochip_remove(gc);
+	iounmap(mm_gc->regs);
+	kfree(gc->label);
+}
+EXPORT_SYMBOL_GPL(of_mm_gpiochip_remove);
+
+static void of_gpiochip_init_valid_mask(struct gpio_chip *chip)
+{
+	int len, i;
+	u32 start, count;
+	struct device_node *np = chip->of_node;
+
+	len = of_property_count_u32_elems(np,  "gpio-reserved-ranges");
+	if (len < 0 || len % 2 != 0)
+		return;
+
+	for (i = 0; i < len; i += 2) {
+		of_property_read_u32_index(np, "gpio-reserved-ranges",
+					   i, &start);
+		of_property_read_u32_index(np, "gpio-reserved-ranges",
+					   i + 1, &count);
+		if (start >= chip->ngpio || start + count > chip->ngpio)
+			continue;
+
+		bitmap_clear(chip->valid_mask, start, count);
+	}
+};
+
+#ifdef CONFIG_PINCTRL
+static int of_gpiochip_add_pin_range(struct gpio_chip *chip)
+{
+	struct device_node *np = chip->of_node;
+	struct of_phandle_args pinspec;
+	struct pinctrl_dev *pctldev;
+	int index = 0, ret;
+	const char *name;
+	static const char group_names_propname[] = "gpio-ranges-group-names";
+	struct property *group_names;
+
+	if (!np)
+		return 0;
+
+	if (!of_property_read_bool(np, "gpio-ranges") &&
+	    chip->of_gpio_ranges_fallback) {
+		return chip->of_gpio_ranges_fallback(chip, np);
+	}
+
+	group_names = of_find_property(np, group_names_propname, NULL);
+
+	for (;; index++) {
+		ret = of_parse_phandle_with_fixed_args(np, "gpio-ranges", 3,
+				index, &pinspec);
+		if (ret)
+			break;
+
+		pctldev = of_pinctrl_get(pinspec.np);
+		of_node_put(pinspec.np);
+		if (!pctldev)
+			return -EPROBE_DEFER;
+
+		if (pinspec.args[2]) {
+			if (group_names) {
+				of_property_read_string_index(np,
+						group_names_propname,
+						index, &name);
+				if (strlen(name)) {
+					pr_err("%pOF: Group name of numeric GPIO ranges must be the empty string.\n",
+						np);
+					break;
+				}
+			}
+			/* npins != 0: linear range */
+			ret = gpiochip_add_pin_range(chip,
+					pinctrl_dev_get_devname(pctldev),
+					pinspec.args[0],
+					pinspec.args[1],
+					pinspec.args[2]);
+			if (ret)
+				return ret;
+		} else {
+			/* npins == 0: special range */
+			if (pinspec.args[1]) {
+				pr_err("%pOF: Illegal gpio-range format.\n",
+					np);
+				break;
+			}
+
+			if (!group_names) {
+				pr_err("%pOF: GPIO group range requested but no %s property.\n",
+					np, group_names_propname);
+				break;
+			}
+
+			ret = of_property_read_string_index(np,
+						group_names_propname,
+						index, &name);
+			if (ret)
+				break;
+
+			if (!strlen(name)) {
+				pr_err("%pOF: Group name of GPIO group range cannot be the empty string.\n",
+				np);
+				break;
+			}
+
+			ret = gpiochip_add_pingroup_range(chip, pctldev,
+						pinspec.args[0], name);
+			if (ret)
+				return ret;
+		}
+	}
+
+	return 0;
+}
+
+#else
+static int of_gpiochip_add_pin_range(struct gpio_chip *chip) { return 0; }
+#endif
+
+int of_gpiochip_add(struct gpio_chip *chip)
+{
+	int ret;
+
+	if (!chip->of_node)
+		return 0;
+
+	if (!chip->of_xlate) {
+		chip->of_gpio_n_cells = 2;
+		chip->of_xlate = of_gpio_simple_xlate;
+	}
+
+	if (chip->of_gpio_n_cells > MAX_PHANDLE_ARGS)
+		return -EINVAL;
+
+	of_gpiochip_init_valid_mask(chip);
+
+	ret = of_gpiochip_add_pin_range(chip);
+	if (ret)
+		return ret;
+
+	of_node_get(chip->of_node);
+
+	ret = of_gpiochip_scan_gpios(chip);
+	if (ret)
+		of_node_put(chip->of_node);
+
+	return ret;
+}
+
+void of_gpiochip_remove(struct gpio_chip *chip)
+{
+	of_node_put(chip->of_node);
+}
diff --git a/drivers/gpio/gpiolib-of.h b/drivers/gpio/gpiolib-of.h
new file mode 100644
index 000000000..ed26664f1
--- /dev/null
+++ b/drivers/gpio/gpiolib-of.h
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef GPIOLIB_OF_H
+#define GPIOLIB_OF_H
+
+struct gpio_chip;
+enum of_gpio_flags;
+
+#ifdef CONFIG_OF_GPIO
+struct gpio_desc *of_find_gpio(struct device *dev,
+			       const char *con_id,
+			       unsigned int idx,
+			       unsigned long *lookupflags);
+int of_gpiochip_add(struct gpio_chip *gc);
+void of_gpiochip_remove(struct gpio_chip *gc);
+int of_gpio_get_count(struct device *dev, const char *con_id);
+bool of_gpio_need_valid_mask(const struct gpio_chip *gc);
+#else
+static inline struct gpio_desc *of_find_gpio(struct device *dev,
+					     const char *con_id,
+					     unsigned int idx,
+					     unsigned long *lookupflags)
+{
+	return ERR_PTR(-ENOENT);
+}
+static inline int of_gpiochip_add(struct gpio_chip *gc) { return 0; }
+static inline void of_gpiochip_remove(struct gpio_chip *gc) { }
+static inline int of_gpio_get_count(struct device *dev, const char *con_id)
+{
+	return 0;
+}
+static inline bool of_gpio_need_valid_mask(const struct gpio_chip *gc)
+{
+	return false;
+}
+#endif /* CONFIG_OF_GPIO */
+
+extern struct notifier_block gpio_of_notifier;
+
+#endif /* GPIOLIB_OF_H */
diff --git a/drivers/gpio/gpiolib-sysfs.c b/drivers/gpio/gpiolib-sysfs.c
new file mode 100644
index 000000000..f45ba0f78
--- /dev/null
+++ b/drivers/gpio/gpiolib-sysfs.c
@@ -0,0 +1,852 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/idr.h>
+#include <linux/mutex.h>
+#include <linux/device.h>
+#include <linux/sysfs.h>
+#include <linux/gpio/consumer.h>
+#include <linux/gpio/driver.h>
+#include <linux/interrupt.h>
+#include <linux/kdev_t.h>
+#include <linux/slab.h>
+#include <linux/ctype.h>
+
+#include "gpiolib.h"
+#include "gpiolib-sysfs.h"
+
+#define GPIO_IRQF_TRIGGER_FALLING	BIT(0)
+#define GPIO_IRQF_TRIGGER_RISING	BIT(1)
+#define GPIO_IRQF_TRIGGER_BOTH		(GPIO_IRQF_TRIGGER_FALLING | \
+					 GPIO_IRQF_TRIGGER_RISING)
+
+struct gpiod_data {
+	struct gpio_desc *desc;
+
+	struct mutex mutex;
+	struct kernfs_node *value_kn;
+	int irq;
+	unsigned char irq_flags;
+
+	bool direction_can_change;
+};
+
+/*
+ * Lock to serialise gpiod export and unexport, and prevent re-export of
+ * gpiod whose chip is being unregistered.
+ */
+static DEFINE_MUTEX(sysfs_lock);
+
+/*
+ * /sys/class/gpio/gpioN... only for GPIOs that are exported
+ *   /direction
+ *      * MAY BE OMITTED if kernel won't allow direction changes
+ *      * is read/write as "in" or "out"
+ *      * may also be written as "high" or "low", initializing
+ *        output value as specified ("out" implies "low")
+ *   /value
+ *      * always readable, subject to hardware behavior
+ *      * may be writable, as zero/nonzero
+ *   /edge
+ *      * configures behavior of poll(2) on /value
+ *      * available only if pin can generate IRQs on input
+ *      * is read/write as "none", "falling", "rising", or "both"
+ *   /active_low
+ *      * configures polarity of /value
+ *      * is read/write as zero/nonzero
+ *      * also affects existing and subsequent "falling" and "rising"
+ *        /edge configuration
+ */
+
+static ssize_t direction_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct gpiod_data *data = dev_get_drvdata(dev);
+	struct gpio_desc *desc = data->desc;
+	ssize_t			status;
+
+	mutex_lock(&data->mutex);
+
+	gpiod_get_direction(desc);
+	status = sprintf(buf, "%s\n",
+			test_bit(FLAG_IS_OUT, &desc->flags)
+				? "out" : "in");
+
+	mutex_unlock(&data->mutex);
+
+	return status;
+}
+
+static ssize_t direction_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t size)
+{
+	struct gpiod_data *data = dev_get_drvdata(dev);
+	struct gpio_desc *desc = data->desc;
+	ssize_t			status;
+
+	mutex_lock(&data->mutex);
+
+	if (sysfs_streq(buf, "high"))
+		status = gpiod_direction_output_raw(desc, 1);
+	else if (sysfs_streq(buf, "out") || sysfs_streq(buf, "low"))
+		status = gpiod_direction_output_raw(desc, 0);
+	else if (sysfs_streq(buf, "in"))
+		status = gpiod_direction_input(desc);
+	else
+		status = -EINVAL;
+
+	mutex_unlock(&data->mutex);
+
+	return status ? : size;
+}
+static DEVICE_ATTR_RW(direction);
+
+static ssize_t value_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct gpiod_data *data = dev_get_drvdata(dev);
+	struct gpio_desc *desc = data->desc;
+	ssize_t			status;
+
+	mutex_lock(&data->mutex);
+
+	status = gpiod_get_value_cansleep(desc);
+	if (status < 0)
+		goto err;
+
+	buf[0] = '0' + status;
+	buf[1] = '\n';
+	status = 2;
+err:
+	mutex_unlock(&data->mutex);
+
+	return status;
+}
+
+static ssize_t value_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t size)
+{
+	struct gpiod_data *data = dev_get_drvdata(dev);
+	struct gpio_desc *desc = data->desc;
+	ssize_t status = 0;
+
+	mutex_lock(&data->mutex);
+
+	if (!test_bit(FLAG_IS_OUT, &desc->flags)) {
+		status = -EPERM;
+	} else {
+		long		value;
+
+		if (size <= 2 && isdigit(buf[0]) &&
+		    (size == 1 || buf[1] == '\n'))
+			value = buf[0] - '0';
+		else
+			status = kstrtol(buf, 0, &value);
+		if (status == 0) {
+			gpiod_set_value_cansleep(desc, value);
+			status = size;
+		}
+	}
+
+	mutex_unlock(&data->mutex);
+
+	return status;
+}
+static DEVICE_ATTR_PREALLOC(value, S_IWUSR | S_IRUGO, value_show, value_store);
+
+static irqreturn_t gpio_sysfs_irq(int irq, void *priv)
+{
+	struct gpiod_data *data = priv;
+
+	sysfs_notify_dirent(data->value_kn);
+
+	return IRQ_HANDLED;
+}
+
+/* Caller holds gpiod-data mutex. */
+static int gpio_sysfs_request_irq(struct device *dev, unsigned char flags)
+{
+	struct gpiod_data	*data = dev_get_drvdata(dev);
+	struct gpio_desc	*desc = data->desc;
+	unsigned long		irq_flags;
+	int			ret;
+
+	data->irq = gpiod_to_irq(desc);
+	if (data->irq < 0)
+		return -EIO;
+
+	data->value_kn = sysfs_get_dirent(dev->kobj.sd, "value");
+	if (!data->value_kn)
+		return -ENODEV;
+
+	irq_flags = IRQF_SHARED;
+	if (flags & GPIO_IRQF_TRIGGER_FALLING)
+		irq_flags |= test_bit(FLAG_ACTIVE_LOW, &desc->flags) ?
+			IRQF_TRIGGER_RISING : IRQF_TRIGGER_FALLING;
+	if (flags & GPIO_IRQF_TRIGGER_RISING)
+		irq_flags |= test_bit(FLAG_ACTIVE_LOW, &desc->flags) ?
+			IRQF_TRIGGER_FALLING : IRQF_TRIGGER_RISING;
+
+	/*
+	 * FIXME: This should be done in the irq_request_resources callback
+	 *        when the irq is requested, but a few drivers currently fail
+	 *        to do so.
+	 *
+	 *        Remove this redundant call (along with the corresponding
+	 *        unlock) when those drivers have been fixed.
+	 */
+	ret = gpiochip_lock_as_irq(desc->gdev->chip, gpio_chip_hwgpio(desc));
+	if (ret < 0)
+		goto err_put_kn;
+
+	ret = request_any_context_irq(data->irq, gpio_sysfs_irq, irq_flags,
+				"gpiolib", data);
+	if (ret < 0)
+		goto err_unlock;
+
+	data->irq_flags = flags;
+
+	return 0;
+
+err_unlock:
+	gpiochip_unlock_as_irq(desc->gdev->chip, gpio_chip_hwgpio(desc));
+err_put_kn:
+	sysfs_put(data->value_kn);
+
+	return ret;
+}
+
+/*
+ * Caller holds gpiod-data mutex (unless called after class-device
+ * deregistration).
+ */
+static void gpio_sysfs_free_irq(struct device *dev)
+{
+	struct gpiod_data *data = dev_get_drvdata(dev);
+	struct gpio_desc *desc = data->desc;
+
+	data->irq_flags = 0;
+	free_irq(data->irq, data);
+	gpiochip_unlock_as_irq(desc->gdev->chip, gpio_chip_hwgpio(desc));
+	sysfs_put(data->value_kn);
+}
+
+static const struct {
+	const char *name;
+	unsigned char flags;
+} trigger_types[] = {
+	{ "none",    0 },
+	{ "falling", GPIO_IRQF_TRIGGER_FALLING },
+	{ "rising",  GPIO_IRQF_TRIGGER_RISING },
+	{ "both",    GPIO_IRQF_TRIGGER_BOTH },
+};
+
+static ssize_t edge_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct gpiod_data *data = dev_get_drvdata(dev);
+	ssize_t	status = 0;
+	int i;
+
+	mutex_lock(&data->mutex);
+
+	for (i = 0; i < ARRAY_SIZE(trigger_types); i++) {
+		if (data->irq_flags == trigger_types[i].flags) {
+			status = sprintf(buf, "%s\n", trigger_types[i].name);
+			break;
+		}
+	}
+
+	mutex_unlock(&data->mutex);
+
+	return status;
+}
+
+static ssize_t edge_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t size)
+{
+	struct gpiod_data *data = dev_get_drvdata(dev);
+	unsigned char flags;
+	ssize_t	status = size;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(trigger_types); i++) {
+		if (sysfs_streq(trigger_types[i].name, buf))
+			break;
+	}
+
+	if (i == ARRAY_SIZE(trigger_types))
+		return -EINVAL;
+
+	flags = trigger_types[i].flags;
+
+	mutex_lock(&data->mutex);
+
+	if (flags == data->irq_flags) {
+		status = size;
+		goto out_unlock;
+	}
+
+	if (data->irq_flags)
+		gpio_sysfs_free_irq(dev);
+
+	if (flags) {
+		status = gpio_sysfs_request_irq(dev, flags);
+		if (!status)
+			status = size;
+	}
+
+out_unlock:
+	mutex_unlock(&data->mutex);
+
+	return status;
+}
+static DEVICE_ATTR_RW(edge);
+
+/* Caller holds gpiod-data mutex. */
+static int gpio_sysfs_set_active_low(struct device *dev, int value)
+{
+	struct gpiod_data	*data = dev_get_drvdata(dev);
+	struct gpio_desc	*desc = data->desc;
+	int			status = 0;
+	unsigned int		flags = data->irq_flags;
+
+	if (!!test_bit(FLAG_ACTIVE_LOW, &desc->flags) == !!value)
+		return 0;
+
+	if (value)
+		set_bit(FLAG_ACTIVE_LOW, &desc->flags);
+	else
+		clear_bit(FLAG_ACTIVE_LOW, &desc->flags);
+
+	/* reconfigure poll(2) support if enabled on one edge only */
+	if (flags == GPIO_IRQF_TRIGGER_FALLING ||
+					flags == GPIO_IRQF_TRIGGER_RISING) {
+		gpio_sysfs_free_irq(dev);
+		status = gpio_sysfs_request_irq(dev, flags);
+	}
+
+	return status;
+}
+
+static ssize_t active_low_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct gpiod_data *data = dev_get_drvdata(dev);
+	struct gpio_desc *desc = data->desc;
+	ssize_t			status;
+
+	mutex_lock(&data->mutex);
+
+	status = sprintf(buf, "%d\n",
+				!!test_bit(FLAG_ACTIVE_LOW, &desc->flags));
+
+	mutex_unlock(&data->mutex);
+
+	return status;
+}
+
+static ssize_t active_low_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t size)
+{
+	struct gpiod_data	*data = dev_get_drvdata(dev);
+	ssize_t			status;
+	long			value;
+
+	mutex_lock(&data->mutex);
+
+	status = kstrtol(buf, 0, &value);
+	if (status == 0)
+		status = gpio_sysfs_set_active_low(dev, value);
+
+	mutex_unlock(&data->mutex);
+
+	return status ? : size;
+}
+static DEVICE_ATTR_RW(active_low);
+
+static umode_t gpio_is_visible(struct kobject *kobj, struct attribute *attr,
+			       int n)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct gpiod_data *data = dev_get_drvdata(dev);
+	struct gpio_desc *desc = data->desc;
+	umode_t mode = attr->mode;
+	bool show_direction = data->direction_can_change;
+
+	if (attr == &dev_attr_direction.attr) {
+		if (!show_direction)
+			mode = 0;
+	} else if (attr == &dev_attr_edge.attr) {
+		if (gpiod_to_irq(desc) < 0)
+			mode = 0;
+		if (!show_direction && test_bit(FLAG_IS_OUT, &desc->flags))
+			mode = 0;
+	}
+
+	return mode;
+}
+
+static struct attribute *gpio_attrs[] = {
+	&dev_attr_direction.attr,
+	&dev_attr_edge.attr,
+	&dev_attr_value.attr,
+	&dev_attr_active_low.attr,
+	NULL,
+};
+
+static const struct attribute_group gpio_group = {
+	.attrs = gpio_attrs,
+	.is_visible = gpio_is_visible,
+};
+
+static const struct attribute_group *gpio_groups[] = {
+	&gpio_group,
+	NULL
+};
+
+/*
+ * /sys/class/gpio/gpiochipN/
+ *   /base ... matching gpio_chip.base (N)
+ *   /label ... matching gpio_chip.label
+ *   /ngpio ... matching gpio_chip.ngpio
+ */
+
+static ssize_t base_show(struct device *dev,
+			       struct device_attribute *attr, char *buf)
+{
+	const struct gpio_chip	*chip = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%d\n", chip->base);
+}
+static DEVICE_ATTR_RO(base);
+
+static ssize_t label_show(struct device *dev,
+			       struct device_attribute *attr, char *buf)
+{
+	const struct gpio_chip	*chip = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%s\n", chip->label ? : "");
+}
+static DEVICE_ATTR_RO(label);
+
+static ssize_t ngpio_show(struct device *dev,
+			       struct device_attribute *attr, char *buf)
+{
+	const struct gpio_chip	*chip = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%u\n", chip->ngpio);
+}
+static DEVICE_ATTR_RO(ngpio);
+
+static struct attribute *gpiochip_attrs[] = {
+	&dev_attr_base.attr,
+	&dev_attr_label.attr,
+	&dev_attr_ngpio.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(gpiochip);
+
+/*
+ * /sys/class/gpio/export ... write-only
+ *	integer N ... number of GPIO to export (full access)
+ * /sys/class/gpio/unexport ... write-only
+ *	integer N ... number of GPIO to unexport
+ */
+static ssize_t export_store(struct class *class,
+				struct class_attribute *attr,
+				const char *buf, size_t len)
+{
+	long			gpio;
+	struct gpio_desc	*desc;
+	int			status;
+	struct gpio_chip	*gc;
+	int			offset;
+
+	status = kstrtol(buf, 0, &gpio);
+	if (status < 0)
+		goto done;
+
+	desc = gpio_to_desc(gpio);
+	/* reject invalid GPIOs */
+	if (!desc) {
+		pr_warn("%s: invalid GPIO %ld\n", __func__, gpio);
+		return -EINVAL;
+	}
+	gc = desc->gdev->chip;
+	offset = gpio_chip_hwgpio(desc);
+	if (!gpiochip_line_is_valid(gc, offset)) {
+		pr_warn("%s: GPIO %ld masked\n", __func__, gpio);
+		return -EINVAL;
+	}
+
+	/* No extra locking here; FLAG_SYSFS just signifies that the
+	 * request and export were done by on behalf of userspace, so
+	 * they may be undone on its behalf too.
+	 */
+
+	status = gpiod_request(desc, "sysfs");
+	if (status < 0) {
+		if (status == -EPROBE_DEFER)
+			status = -ENODEV;
+		goto done;
+	}
+
+	status = gpiod_set_transitory(desc, false);
+	if (status) {
+		gpiod_free(desc);
+		goto done;
+	}
+
+	status = gpiod_export(desc, true);
+	if (status < 0)
+		gpiod_free(desc);
+	else
+		set_bit(FLAG_SYSFS, &desc->flags);
+
+done:
+	if (status)
+		pr_debug("%s: status %d\n", __func__, status);
+	return status ? : len;
+}
+static CLASS_ATTR_WO(export);
+
+static ssize_t unexport_store(struct class *class,
+				struct class_attribute *attr,
+				const char *buf, size_t len)
+{
+	long			gpio;
+	struct gpio_desc	*desc;
+	int			status;
+
+	status = kstrtol(buf, 0, &gpio);
+	if (status < 0)
+		goto done;
+
+	desc = gpio_to_desc(gpio);
+	/* reject bogus commands (gpio_unexport ignores them) */
+	if (!desc) {
+		pr_warn("%s: invalid GPIO %ld\n", __func__, gpio);
+		return -EINVAL;
+	}
+
+	status = -EINVAL;
+
+	/* No extra locking here; FLAG_SYSFS just signifies that the
+	 * request and export were done by on behalf of userspace, so
+	 * they may be undone on its behalf too.
+	 */
+	if (test_and_clear_bit(FLAG_SYSFS, &desc->flags)) {
+		status = 0;
+		gpiod_free(desc);
+	}
+done:
+	if (status)
+		pr_debug("%s: status %d\n", __func__, status);
+	return status ? : len;
+}
+static CLASS_ATTR_WO(unexport);
+
+static struct attribute *gpio_class_attrs[] = {
+	&class_attr_export.attr,
+	&class_attr_unexport.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(gpio_class);
+
+static struct class gpio_class = {
+	.name =		"gpio",
+	.owner =	THIS_MODULE,
+
+	.class_groups = gpio_class_groups,
+};
+
+
+/**
+ * gpiod_export - export a GPIO through sysfs
+ * @desc: GPIO to make available, already requested
+ * @direction_may_change: true if userspace may change GPIO direction
+ * Context: arch_initcall or later
+ *
+ * When drivers want to make a GPIO accessible to userspace after they
+ * have requested it -- perhaps while debugging, or as part of their
+ * public interface -- they may use this routine.  If the GPIO can
+ * change direction (some can't) and the caller allows it, userspace
+ * will see "direction" sysfs attribute which may be used to change
+ * the gpio's direction.  A "value" attribute will always be provided.
+ *
+ * Returns zero on success, else an error.
+ */
+int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
+{
+	struct gpio_chip	*chip;
+	struct gpio_device	*gdev;
+	struct gpiod_data	*data;
+	unsigned long		flags;
+	int			status;
+	const char		*ioname = NULL;
+	struct device		*dev;
+	int			offset;
+
+	/* can't export until sysfs is available ... */
+	if (!gpio_class.p) {
+		pr_debug("%s: called too early!\n", __func__);
+		return -ENOENT;
+	}
+
+	if (!desc) {
+		pr_debug("%s: invalid gpio descriptor\n", __func__);
+		return -EINVAL;
+	}
+
+	gdev = desc->gdev;
+	chip = gdev->chip;
+
+	mutex_lock(&sysfs_lock);
+
+	/* check if chip is being removed */
+	if (!chip || !gdev->mockdev) {
+		status = -ENODEV;
+		goto err_unlock;
+	}
+
+	spin_lock_irqsave(&gpio_lock, flags);
+	if (!test_bit(FLAG_REQUESTED, &desc->flags) ||
+	     test_bit(FLAG_EXPORT, &desc->flags)) {
+		spin_unlock_irqrestore(&gpio_lock, flags);
+		gpiod_dbg(desc, "%s: unavailable (requested=%d, exported=%d)\n",
+				__func__,
+				test_bit(FLAG_REQUESTED, &desc->flags),
+				test_bit(FLAG_EXPORT, &desc->flags));
+		status = -EPERM;
+		goto err_unlock;
+	}
+	spin_unlock_irqrestore(&gpio_lock, flags);
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (!data) {
+		status = -ENOMEM;
+		goto err_unlock;
+	}
+
+	data->desc = desc;
+	mutex_init(&data->mutex);
+	if (chip->direction_input && chip->direction_output)
+		data->direction_can_change = direction_may_change;
+	else
+		data->direction_can_change = false;
+
+	offset = gpio_chip_hwgpio(desc);
+	if (chip->names && chip->names[offset])
+		ioname = chip->names[offset];
+
+	dev = device_create_with_groups(&gpio_class, &gdev->dev,
+					MKDEV(0, 0), data, gpio_groups,
+					ioname ? ioname : "gpio%u",
+					desc_to_gpio(desc));
+	if (IS_ERR(dev)) {
+		status = PTR_ERR(dev);
+		goto err_free_data;
+	}
+
+	set_bit(FLAG_EXPORT, &desc->flags);
+	mutex_unlock(&sysfs_lock);
+	return 0;
+
+err_free_data:
+	kfree(data);
+err_unlock:
+	mutex_unlock(&sysfs_lock);
+	gpiod_dbg(desc, "%s: status %d\n", __func__, status);
+	return status;
+}
+EXPORT_SYMBOL_GPL(gpiod_export);
+
+static int match_export(struct device *dev, const void *desc)
+{
+	struct gpiod_data *data = dev_get_drvdata(dev);
+
+	return data->desc == desc;
+}
+
+/**
+ * gpiod_export_link - create a sysfs link to an exported GPIO node
+ * @dev: device under which to create symlink
+ * @name: name of the symlink
+ * @desc: GPIO to create symlink to, already exported
+ *
+ * Set up a symlink from /sys/.../dev/name to /sys/class/gpio/gpioN
+ * node. Caller is responsible for unlinking.
+ *
+ * Returns zero on success, else an error.
+ */
+int gpiod_export_link(struct device *dev, const char *name,
+		      struct gpio_desc *desc)
+{
+	struct device *cdev;
+	int ret;
+
+	if (!desc) {
+		pr_warn("%s: invalid GPIO\n", __func__);
+		return -EINVAL;
+	}
+
+	cdev = class_find_device(&gpio_class, NULL, desc, match_export);
+	if (!cdev)
+		return -ENODEV;
+
+	ret = sysfs_create_link(&dev->kobj, &cdev->kobj, name);
+	put_device(cdev);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(gpiod_export_link);
+
+/**
+ * gpiod_unexport - reverse effect of gpiod_export()
+ * @desc: GPIO to make unavailable
+ *
+ * This is implicit on gpiod_free().
+ */
+void gpiod_unexport(struct gpio_desc *desc)
+{
+	struct gpiod_data *data;
+	struct device *dev;
+
+	if (!desc) {
+		pr_warn("%s: invalid GPIO\n", __func__);
+		return;
+	}
+
+	mutex_lock(&sysfs_lock);
+
+	if (!test_bit(FLAG_EXPORT, &desc->flags))
+		goto err_unlock;
+
+	dev = class_find_device(&gpio_class, NULL, desc, match_export);
+	if (!dev)
+		goto err_unlock;
+
+	data = dev_get_drvdata(dev);
+
+	clear_bit(FLAG_EXPORT, &desc->flags);
+
+	device_unregister(dev);
+
+	/*
+	 * Release irq after deregistration to prevent race with edge_store.
+	 */
+	if (data->irq_flags)
+		gpio_sysfs_free_irq(dev);
+
+	mutex_unlock(&sysfs_lock);
+
+	put_device(dev);
+	kfree(data);
+
+	return;
+
+err_unlock:
+	mutex_unlock(&sysfs_lock);
+}
+EXPORT_SYMBOL_GPL(gpiod_unexport);
+
+int gpiochip_sysfs_register(struct gpio_device *gdev)
+{
+	struct device	*dev;
+	struct device	*parent;
+	struct gpio_chip *chip = gdev->chip;
+
+	/*
+	 * Many systems add gpio chips for SOC support very early,
+	 * before driver model support is available.  In those cases we
+	 * register later, in gpiolib_sysfs_init() ... here we just
+	 * verify that _some_ field of gpio_class got initialized.
+	 */
+	if (!gpio_class.p)
+		return 0;
+
+	/*
+	 * For sysfs backward compatibility we need to preserve this
+	 * preferred parenting to the gpio_chip parent field, if set.
+	 */
+	if (chip->parent)
+		parent = chip->parent;
+	else
+		parent = &gdev->dev;
+
+	/* use chip->base for the ID; it's already known to be unique */
+	dev = device_create_with_groups(&gpio_class, parent, MKDEV(0, 0), chip,
+					gpiochip_groups, GPIOCHIP_NAME "%d",
+					chip->base);
+	if (IS_ERR(dev))
+		return PTR_ERR(dev);
+
+	mutex_lock(&sysfs_lock);
+	gdev->mockdev = dev;
+	mutex_unlock(&sysfs_lock);
+
+	return 0;
+}
+
+void gpiochip_sysfs_unregister(struct gpio_device *gdev)
+{
+	struct gpio_desc *desc;
+	struct gpio_chip *chip = gdev->chip;
+	unsigned int i;
+
+	if (!gdev->mockdev)
+		return;
+
+	device_unregister(gdev->mockdev);
+
+	/* prevent further gpiod exports */
+	mutex_lock(&sysfs_lock);
+	gdev->mockdev = NULL;
+	mutex_unlock(&sysfs_lock);
+
+	/* unregister gpiod class devices owned by sysfs */
+	for (i = 0; i < chip->ngpio; i++) {
+		desc = &gdev->descs[i];
+		if (test_and_clear_bit(FLAG_SYSFS, &desc->flags))
+			gpiod_free(desc);
+	}
+}
+
+static int __init gpiolib_sysfs_init(void)
+{
+	int		status;
+	unsigned long	flags;
+	struct gpio_device *gdev;
+
+	status = class_register(&gpio_class);
+	if (status < 0)
+		return status;
+
+	/* Scan and register the gpio_chips which registered very
+	 * early (e.g. before the class_register above was called).
+	 *
+	 * We run before arch_initcall() so chip->dev nodes can have
+	 * registered, and so arch_initcall() can always gpio_export().
+	 */
+	spin_lock_irqsave(&gpio_lock, flags);
+	list_for_each_entry(gdev, &gpio_devices, list) {
+		if (gdev->mockdev)
+			continue;
+
+		/*
+		 * TODO we yield gpio_lock here because
+		 * gpiochip_sysfs_register() acquires a mutex. This is unsafe
+		 * and needs to be fixed.
+		 *
+		 * Also it would be nice to use gpiochip_find() here so we
+		 * can keep gpio_chips local to gpiolib.c, but the yield of
+		 * gpio_lock prevents us from doing this.
+		 */
+		spin_unlock_irqrestore(&gpio_lock, flags);
+		status = gpiochip_sysfs_register(gdev);
+		spin_lock_irqsave(&gpio_lock, flags);
+	}
+	spin_unlock_irqrestore(&gpio_lock, flags);
+
+	return status;
+}
+postcore_initcall(gpiolib_sysfs_init);
diff --git a/drivers/gpio/gpiolib-sysfs.h b/drivers/gpio/gpiolib-sysfs.h
new file mode 100644
index 000000000..ddd0e503f
--- /dev/null
+++ b/drivers/gpio/gpiolib-sysfs.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef GPIOLIB_SYSFS_H
+#define GPIOLIB_SYSFS_H
+
+#ifdef CONFIG_GPIO_SYSFS
+
+int gpiochip_sysfs_register(struct gpio_device *gdev);
+void gpiochip_sysfs_unregister(struct gpio_device *gdev);
+
+#else
+
+static inline int gpiochip_sysfs_register(struct gpio_device *gdev)
+{
+	return 0;
+}
+
+static inline void gpiochip_sysfs_unregister(struct gpio_device *gdev)
+{
+}
+
+#endif /* CONFIG_GPIO_SYSFS */
+
+#endif /* GPIOLIB_SYSFS_H */
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
new file mode 100644
index 000000000..d10f62108
--- /dev/null
+++ b/drivers/gpio/gpiolib.c
@@ -0,0 +1,4548 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/bitmap.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/gpio.h>
+#include <linux/idr.h>
+#include <linux/slab.h>
+#include <linux/acpi.h>
+#include <linux/gpio/driver.h>
+#include <linux/gpio/machine.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/fs.h>
+#include <linux/compat.h>
+#include <linux/file.h>
+#include <uapi/linux/gpio.h>
+
+#include "gpiolib.h"
+#include "gpiolib-of.h"
+#include "gpiolib-acpi.h"
+#include "gpiolib-cdev.h"
+#include "gpiolib-sysfs.h"
+
+#define CREATE_TRACE_POINTS
+#include <trace/events/gpio.h>
+
+/* Implementation infrastructure for GPIO interfaces.
+ *
+ * The GPIO programming interface allows for inlining speed-critical
+ * get/set operations for common cases, so that access to SOC-integrated
+ * GPIOs can sometimes cost only an instruction or two per bit.
+ */
+
+
+/* When debugging, extend minimal trust to callers and platform code.
+ * Also emit diagnostic messages that may help initial bringup, when
+ * board setup or driver bugs are most common.
+ *
+ * Otherwise, minimize overhead in what may be bitbanging codepaths.
+ */
+#ifdef	DEBUG
+#define	extra_checks	1
+#else
+#define	extra_checks	0
+#endif
+
+/* Device and char device-related information */
+static DEFINE_IDA(gpio_ida);
+static dev_t gpio_devt;
+#define GPIO_DEV_MAX 256 /* 256 GPIO chip devices supported */
+static struct bus_type gpio_bus_type = {
+	.name = "gpio",
+};
+
+/*
+ * Number of GPIOs to use for the fast path in set array
+ */
+#define FASTPATH_NGPIO CONFIG_GPIOLIB_FASTPATH_LIMIT
+
+/* gpio_lock prevents conflicts during gpio_desc[] table updates.
+ * While any GPIO is requested, its gpio_chip is not removable;
+ * each GPIO's "requested" flag serves as a lock and refcount.
+ */
+DEFINE_SPINLOCK(gpio_lock);
+
+static DEFINE_MUTEX(gpio_lookup_lock);
+static LIST_HEAD(gpio_lookup_list);
+LIST_HEAD(gpio_devices);
+
+static DEFINE_MUTEX(gpio_machine_hogs_mutex);
+static LIST_HEAD(gpio_machine_hogs);
+
+static void gpiochip_free_hogs(struct gpio_chip *gc);
+static int gpiochip_add_irqchip(struct gpio_chip *gc,
+				struct lock_class_key *lock_key,
+				struct lock_class_key *request_key);
+static void gpiochip_irqchip_remove(struct gpio_chip *gc);
+static int gpiochip_irqchip_init_hw(struct gpio_chip *gc);
+static int gpiochip_irqchip_init_valid_mask(struct gpio_chip *gc);
+static void gpiochip_irqchip_free_valid_mask(struct gpio_chip *gc);
+
+static bool gpiolib_initialized;
+
+static inline void desc_set_label(struct gpio_desc *d, const char *label)
+{
+	d->label = label;
+}
+
+/**
+ * gpio_to_desc - Convert a GPIO number to its descriptor
+ * @gpio: global GPIO number
+ *
+ * Returns:
+ * The GPIO descriptor associated with the given GPIO, or %NULL if no GPIO
+ * with the given number exists in the system.
+ */
+struct gpio_desc *gpio_to_desc(unsigned gpio)
+{
+	struct gpio_device *gdev;
+	unsigned long flags;
+
+	spin_lock_irqsave(&gpio_lock, flags);
+
+	list_for_each_entry(gdev, &gpio_devices, list) {
+		if (gdev->base <= gpio &&
+		    gdev->base + gdev->ngpio > gpio) {
+			spin_unlock_irqrestore(&gpio_lock, flags);
+			return &gdev->descs[gpio - gdev->base];
+		}
+	}
+
+	spin_unlock_irqrestore(&gpio_lock, flags);
+
+	if (!gpio_is_valid(gpio))
+		WARN(1, "invalid GPIO %d\n", gpio);
+
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(gpio_to_desc);
+
+/**
+ * gpiochip_get_desc - get the GPIO descriptor corresponding to the given
+ *                     hardware number for this chip
+ * @gc: GPIO chip
+ * @hwnum: hardware number of the GPIO for this chip
+ *
+ * Returns:
+ * A pointer to the GPIO descriptor or ``ERR_PTR(-EINVAL)`` if no GPIO exists
+ * in the given chip for the specified hardware number.
+ */
+struct gpio_desc *gpiochip_get_desc(struct gpio_chip *gc,
+				    unsigned int hwnum)
+{
+	struct gpio_device *gdev = gc->gpiodev;
+
+	if (hwnum >= gdev->ngpio)
+		return ERR_PTR(-EINVAL);
+
+	return &gdev->descs[hwnum];
+}
+EXPORT_SYMBOL_GPL(gpiochip_get_desc);
+
+/**
+ * desc_to_gpio - convert a GPIO descriptor to the integer namespace
+ * @desc: GPIO descriptor
+ *
+ * This should disappear in the future but is needed since we still
+ * use GPIO numbers for error messages and sysfs nodes.
+ *
+ * Returns:
+ * The global GPIO number for the GPIO specified by its descriptor.
+ */
+int desc_to_gpio(const struct gpio_desc *desc)
+{
+	return desc->gdev->base + (desc - &desc->gdev->descs[0]);
+}
+EXPORT_SYMBOL_GPL(desc_to_gpio);
+
+
+/**
+ * gpiod_to_chip - Return the GPIO chip to which a GPIO descriptor belongs
+ * @desc:	descriptor to return the chip of
+ */
+struct gpio_chip *gpiod_to_chip(const struct gpio_desc *desc)
+{
+	if (!desc || !desc->gdev)
+		return NULL;
+	return desc->gdev->chip;
+}
+EXPORT_SYMBOL_GPL(gpiod_to_chip);
+
+/* dynamic allocation of GPIOs, e.g. on a hotplugged device */
+static int gpiochip_find_base(int ngpio)
+{
+	struct gpio_device *gdev;
+	int base = ARCH_NR_GPIOS - ngpio;
+
+	list_for_each_entry_reverse(gdev, &gpio_devices, list) {
+		/* found a free space? */
+		if (gdev->base + gdev->ngpio <= base)
+			break;
+		/* nope, check the space right before the chip */
+		base = gdev->base - ngpio;
+	}
+
+	if (gpio_is_valid(base)) {
+		pr_debug("%s: found new base at %d\n", __func__, base);
+		return base;
+	} else {
+		pr_err("%s: cannot find free range\n", __func__);
+		return -ENOSPC;
+	}
+}
+
+/**
+ * gpiod_get_direction - return the current direction of a GPIO
+ * @desc:	GPIO to get the direction of
+ *
+ * Returns 0 for output, 1 for input, or an error code in case of error.
+ *
+ * This function may sleep if gpiod_cansleep() is true.
+ */
+int gpiod_get_direction(struct gpio_desc *desc)
+{
+	struct gpio_chip *gc;
+	unsigned offset;
+	int ret;
+
+	gc = gpiod_to_chip(desc);
+	offset = gpio_chip_hwgpio(desc);
+
+	/*
+	 * Open drain emulation using input mode may incorrectly report
+	 * input here, fix that up.
+	 */
+	if (test_bit(FLAG_OPEN_DRAIN, &desc->flags) &&
+	    test_bit(FLAG_IS_OUT, &desc->flags))
+		return 0;
+
+	if (!gc->get_direction)
+		return -ENOTSUPP;
+
+	ret = gc->get_direction(gc, offset);
+	if (ret < 0)
+		return ret;
+
+	/* GPIOF_DIR_IN or other positive, otherwise GPIOF_DIR_OUT */
+	if (ret > 0)
+		ret = 1;
+
+	assign_bit(FLAG_IS_OUT, &desc->flags, !ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(gpiod_get_direction);
+
+/*
+ * Add a new chip to the global chips list, keeping the list of chips sorted
+ * by range(means [base, base + ngpio - 1]) order.
+ *
+ * Return -EBUSY if the new chip overlaps with some other chip's integer
+ * space.
+ */
+static int gpiodev_add_to_list(struct gpio_device *gdev)
+{
+	struct gpio_device *prev, *next;
+
+	if (list_empty(&gpio_devices)) {
+		/* initial entry in list */
+		list_add_tail(&gdev->list, &gpio_devices);
+		return 0;
+	}
+
+	next = list_entry(gpio_devices.next, struct gpio_device, list);
+	if (gdev->base + gdev->ngpio <= next->base) {
+		/* add before first entry */
+		list_add(&gdev->list, &gpio_devices);
+		return 0;
+	}
+
+	prev = list_entry(gpio_devices.prev, struct gpio_device, list);
+	if (prev->base + prev->ngpio <= gdev->base) {
+		/* add behind last entry */
+		list_add_tail(&gdev->list, &gpio_devices);
+		return 0;
+	}
+
+	list_for_each_entry_safe(prev, next, &gpio_devices, list) {
+		/* at the end of the list */
+		if (&next->list == &gpio_devices)
+			break;
+
+		/* add between prev and next */
+		if (prev->base + prev->ngpio <= gdev->base
+				&& gdev->base + gdev->ngpio <= next->base) {
+			list_add(&gdev->list, &prev->list);
+			return 0;
+		}
+	}
+
+	dev_err(&gdev->dev, "GPIO integer space overlap, cannot add chip\n");
+	return -EBUSY;
+}
+
+/*
+ * Convert a GPIO name to its descriptor
+ * Note that there is no guarantee that GPIO names are globally unique!
+ * Hence this function will return, if it exists, a reference to the first GPIO
+ * line found that matches the given name.
+ */
+static struct gpio_desc *gpio_name_to_desc(const char * const name)
+{
+	struct gpio_device *gdev;
+	unsigned long flags;
+
+	if (!name)
+		return NULL;
+
+	spin_lock_irqsave(&gpio_lock, flags);
+
+	list_for_each_entry(gdev, &gpio_devices, list) {
+		int i;
+
+		for (i = 0; i != gdev->ngpio; ++i) {
+			struct gpio_desc *desc = &gdev->descs[i];
+
+			if (!desc->name)
+				continue;
+
+			if (!strcmp(desc->name, name)) {
+				spin_unlock_irqrestore(&gpio_lock, flags);
+				return desc;
+			}
+		}
+	}
+
+	spin_unlock_irqrestore(&gpio_lock, flags);
+
+	return NULL;
+}
+
+/*
+ * Take the names from gc->names and assign them to their GPIO descriptors.
+ * Warn if a name is already used for a GPIO line on a different GPIO chip.
+ *
+ * Note that:
+ *   1. Non-unique names are still accepted,
+ *   2. Name collisions within the same GPIO chip are not reported.
+ */
+static int gpiochip_set_desc_names(struct gpio_chip *gc)
+{
+	struct gpio_device *gdev = gc->gpiodev;
+	int i;
+
+	/* First check all names if they are unique */
+	for (i = 0; i != gc->ngpio; ++i) {
+		struct gpio_desc *gpio;
+
+		gpio = gpio_name_to_desc(gc->names[i]);
+		if (gpio)
+			dev_warn(&gdev->dev,
+				 "Detected name collision for GPIO name '%s'\n",
+				 gc->names[i]);
+	}
+
+	/* Then add all names to the GPIO descriptors */
+	for (i = 0; i != gc->ngpio; ++i)
+		gdev->descs[i].name = gc->names[i];
+
+	return 0;
+}
+
+/*
+ * devprop_gpiochip_set_names - Set GPIO line names using device properties
+ * @chip: GPIO chip whose lines should be named, if possible
+ *
+ * Looks for device property "gpio-line-names" and if it exists assigns
+ * GPIO line names for the chip. The memory allocated for the assigned
+ * names belong to the underlying firmware node and should not be released
+ * by the caller.
+ */
+static int devprop_gpiochip_set_names(struct gpio_chip *chip)
+{
+	struct gpio_device *gdev = chip->gpiodev;
+	struct fwnode_handle *fwnode = dev_fwnode(&gdev->dev);
+	const char **names;
+	int ret, i;
+	int count;
+
+	count = fwnode_property_string_array_count(fwnode, "gpio-line-names");
+	if (count < 0)
+		return 0;
+
+	if (count > gdev->ngpio) {
+		dev_warn(&gdev->dev, "gpio-line-names is length %d but should be at most length %d",
+			 count, gdev->ngpio);
+		count = gdev->ngpio;
+	}
+
+	names = kcalloc(count, sizeof(*names), GFP_KERNEL);
+	if (!names)
+		return -ENOMEM;
+
+	ret = fwnode_property_read_string_array(fwnode, "gpio-line-names",
+						names, count);
+	if (ret < 0) {
+		dev_warn(&gdev->dev, "failed to read GPIO line names\n");
+		kfree(names);
+		return ret;
+	}
+
+	for (i = 0; i < count; i++)
+		gdev->descs[i].name = names[i];
+
+	kfree(names);
+
+	return 0;
+}
+
+static unsigned long *gpiochip_allocate_mask(struct gpio_chip *gc)
+{
+	unsigned long *p;
+
+	p = bitmap_alloc(gc->ngpio, GFP_KERNEL);
+	if (!p)
+		return NULL;
+
+	/* Assume by default all GPIOs are valid */
+	bitmap_fill(p, gc->ngpio);
+
+	return p;
+}
+
+static int gpiochip_alloc_valid_mask(struct gpio_chip *gc)
+{
+	if (!(of_gpio_need_valid_mask(gc) || gc->init_valid_mask))
+		return 0;
+
+	gc->valid_mask = gpiochip_allocate_mask(gc);
+	if (!gc->valid_mask)
+		return -ENOMEM;
+
+	return 0;
+}
+
+static int gpiochip_init_valid_mask(struct gpio_chip *gc)
+{
+	if (gc->init_valid_mask)
+		return gc->init_valid_mask(gc,
+					   gc->valid_mask,
+					   gc->ngpio);
+
+	return 0;
+}
+
+static void gpiochip_free_valid_mask(struct gpio_chip *gc)
+{
+	bitmap_free(gc->valid_mask);
+	gc->valid_mask = NULL;
+}
+
+static int gpiochip_add_pin_ranges(struct gpio_chip *gc)
+{
+	if (gc->add_pin_ranges)
+		return gc->add_pin_ranges(gc);
+
+	return 0;
+}
+
+bool gpiochip_line_is_valid(const struct gpio_chip *gc,
+				unsigned int offset)
+{
+	/* No mask means all valid */
+	if (likely(!gc->valid_mask))
+		return true;
+	return test_bit(offset, gc->valid_mask);
+}
+EXPORT_SYMBOL_GPL(gpiochip_line_is_valid);
+
+static void gpiodevice_release(struct device *dev)
+{
+	struct gpio_device *gdev = dev_get_drvdata(dev);
+	unsigned long flags;
+
+	spin_lock_irqsave(&gpio_lock, flags);
+	list_del(&gdev->list);
+	spin_unlock_irqrestore(&gpio_lock, flags);
+
+	ida_free(&gpio_ida, gdev->id);
+	kfree_const(gdev->label);
+	kfree(gdev->descs);
+	kfree(gdev);
+}
+
+#ifdef CONFIG_GPIO_CDEV
+#define gcdev_register(gdev, devt)	gpiolib_cdev_register((gdev), (devt))
+#define gcdev_unregister(gdev)		gpiolib_cdev_unregister((gdev))
+#else
+/*
+ * gpiolib_cdev_register() indirectly calls device_add(), which is still
+ * required even when cdev is not selected.
+ */
+#define gcdev_register(gdev, devt)	device_add(&(gdev)->dev)
+#define gcdev_unregister(gdev)		device_del(&(gdev)->dev)
+#endif
+
+static int gpiochip_setup_dev(struct gpio_device *gdev)
+{
+	int ret;
+
+	ret = gcdev_register(gdev, gpio_devt);
+	if (ret)
+		return ret;
+
+	ret = gpiochip_sysfs_register(gdev);
+	if (ret)
+		goto err_remove_device;
+
+	/* From this point, the .release() function cleans up gpio_device */
+	gdev->dev.release = gpiodevice_release;
+	dev_dbg(&gdev->dev, "registered GPIOs %d to %d on %s\n", gdev->base,
+		gdev->base + gdev->ngpio - 1, gdev->chip->label ? : "generic");
+
+	return 0;
+
+err_remove_device:
+	gcdev_unregister(gdev);
+	return ret;
+}
+
+static void gpiochip_machine_hog(struct gpio_chip *gc, struct gpiod_hog *hog)
+{
+	struct gpio_desc *desc;
+	int rv;
+
+	desc = gpiochip_get_desc(gc, hog->chip_hwnum);
+	if (IS_ERR(desc)) {
+		chip_err(gc, "%s: unable to get GPIO desc: %ld\n", __func__,
+			 PTR_ERR(desc));
+		return;
+	}
+
+	if (test_bit(FLAG_IS_HOGGED, &desc->flags))
+		return;
+
+	rv = gpiod_hog(desc, hog->line_name, hog->lflags, hog->dflags);
+	if (rv)
+		gpiod_err(desc, "%s: unable to hog GPIO line (%s:%u): %d\n",
+			  __func__, gc->label, hog->chip_hwnum, rv);
+}
+
+static void machine_gpiochip_add(struct gpio_chip *gc)
+{
+	struct gpiod_hog *hog;
+
+	mutex_lock(&gpio_machine_hogs_mutex);
+
+	list_for_each_entry(hog, &gpio_machine_hogs, list) {
+		if (!strcmp(gc->label, hog->chip_label))
+			gpiochip_machine_hog(gc, hog);
+	}
+
+	mutex_unlock(&gpio_machine_hogs_mutex);
+}
+
+static void gpiochip_setup_devs(void)
+{
+	struct gpio_device *gdev;
+	int ret;
+
+	list_for_each_entry(gdev, &gpio_devices, list) {
+		ret = gpiochip_setup_dev(gdev);
+		if (ret)
+			dev_err(&gdev->dev,
+				"Failed to initialize gpio device (%d)\n", ret);
+	}
+}
+
+int gpiochip_add_data_with_key(struct gpio_chip *gc, void *data,
+			       struct lock_class_key *lock_key,
+			       struct lock_class_key *request_key)
+{
+	struct fwnode_handle *fwnode = gc->parent ? dev_fwnode(gc->parent) : NULL;
+	unsigned long	flags;
+	int		ret = 0;
+	unsigned	i;
+	int		base = gc->base;
+	struct gpio_device *gdev;
+
+	/*
+	 * First: allocate and populate the internal stat container, and
+	 * set up the struct device.
+	 */
+	gdev = kzalloc(sizeof(*gdev), GFP_KERNEL);
+	if (!gdev)
+		return -ENOMEM;
+	gdev->dev.bus = &gpio_bus_type;
+	gdev->chip = gc;
+	gc->gpiodev = gdev;
+	if (gc->parent) {
+		gdev->dev.parent = gc->parent;
+		gdev->dev.of_node = gc->parent->of_node;
+	}
+
+#ifdef CONFIG_OF_GPIO
+	/* If the gpiochip has an assigned OF node this takes precedence */
+	if (gc->of_node)
+		gdev->dev.of_node = gc->of_node;
+	else
+		gc->of_node = gdev->dev.of_node;
+#endif
+
+	/*
+	 * Assign fwnode depending on the result of the previous calls,
+	 * if none of them succeed, assign it to the parent's one.
+	 */
+	gdev->dev.fwnode = dev_fwnode(&gdev->dev) ?: fwnode;
+
+	gdev->id = ida_alloc(&gpio_ida, GFP_KERNEL);
+	if (gdev->id < 0) {
+		ret = gdev->id;
+		goto err_free_gdev;
+	}
+
+	ret = dev_set_name(&gdev->dev, GPIOCHIP_NAME "%d", gdev->id);
+	if (ret)
+		goto err_free_ida;
+
+	device_initialize(&gdev->dev);
+	dev_set_drvdata(&gdev->dev, gdev);
+	if (gc->parent && gc->parent->driver)
+		gdev->owner = gc->parent->driver->owner;
+	else if (gc->owner)
+		/* TODO: remove chip->owner */
+		gdev->owner = gc->owner;
+	else
+		gdev->owner = THIS_MODULE;
+
+	gdev->descs = kcalloc(gc->ngpio, sizeof(gdev->descs[0]), GFP_KERNEL);
+	if (!gdev->descs) {
+		ret = -ENOMEM;
+		goto err_free_dev_name;
+	}
+
+	if (gc->ngpio == 0) {
+		chip_err(gc, "tried to insert a GPIO chip with zero lines\n");
+		ret = -EINVAL;
+		goto err_free_descs;
+	}
+
+	if (gc->ngpio > FASTPATH_NGPIO)
+		chip_warn(gc, "line cnt %u is greater than fast path cnt %u\n",
+			  gc->ngpio, FASTPATH_NGPIO);
+
+	gdev->label = kstrdup_const(gc->label ?: "unknown", GFP_KERNEL);
+	if (!gdev->label) {
+		ret = -ENOMEM;
+		goto err_free_descs;
+	}
+
+	gdev->ngpio = gc->ngpio;
+	gdev->data = data;
+
+	spin_lock_irqsave(&gpio_lock, flags);
+
+	/*
+	 * TODO: this allocates a Linux GPIO number base in the global
+	 * GPIO numberspace for this chip. In the long run we want to
+	 * get *rid* of this numberspace and use only descriptors, but
+	 * it may be a pipe dream. It will not happen before we get rid
+	 * of the sysfs interface anyways.
+	 */
+	if (base < 0) {
+		base = gpiochip_find_base(gc->ngpio);
+		if (base < 0) {
+			ret = base;
+			spin_unlock_irqrestore(&gpio_lock, flags);
+			goto err_free_label;
+		}
+		/*
+		 * TODO: it should not be necessary to reflect the assigned
+		 * base outside of the GPIO subsystem. Go over drivers and
+		 * see if anyone makes use of this, else drop this and assign
+		 * a poison instead.
+		 */
+		gc->base = base;
+	}
+	gdev->base = base;
+
+	ret = gpiodev_add_to_list(gdev);
+	if (ret) {
+		spin_unlock_irqrestore(&gpio_lock, flags);
+		goto err_free_label;
+	}
+
+	for (i = 0; i < gc->ngpio; i++)
+		gdev->descs[i].gdev = gdev;
+
+	spin_unlock_irqrestore(&gpio_lock, flags);
+
+	BLOCKING_INIT_NOTIFIER_HEAD(&gdev->notifier);
+
+#ifdef CONFIG_PINCTRL
+	INIT_LIST_HEAD(&gdev->pin_ranges);
+#endif
+
+	if (gc->names)
+		ret = gpiochip_set_desc_names(gc);
+	else
+		ret = devprop_gpiochip_set_names(gc);
+	if (ret)
+		goto err_remove_from_list;
+
+	ret = gpiochip_alloc_valid_mask(gc);
+	if (ret)
+		goto err_remove_from_list;
+
+	ret = of_gpiochip_add(gc);
+	if (ret)
+		goto err_free_gpiochip_mask;
+
+	ret = gpiochip_init_valid_mask(gc);
+	if (ret)
+		goto err_remove_of_chip;
+
+	for (i = 0; i < gc->ngpio; i++) {
+		struct gpio_desc *desc = &gdev->descs[i];
+
+		if (gc->get_direction && gpiochip_line_is_valid(gc, i)) {
+			assign_bit(FLAG_IS_OUT,
+				   &desc->flags, !gc->get_direction(gc, i));
+		} else {
+			assign_bit(FLAG_IS_OUT,
+				   &desc->flags, !gc->direction_input);
+		}
+	}
+
+	ret = gpiochip_add_pin_ranges(gc);
+	if (ret)
+		goto err_remove_of_chip;
+
+	acpi_gpiochip_add(gc);
+
+	machine_gpiochip_add(gc);
+
+	ret = gpiochip_irqchip_init_valid_mask(gc);
+	if (ret)
+		goto err_remove_acpi_chip;
+
+	ret = gpiochip_irqchip_init_hw(gc);
+	if (ret)
+		goto err_remove_acpi_chip;
+
+	ret = gpiochip_add_irqchip(gc, lock_key, request_key);
+	if (ret)
+		goto err_remove_irqchip_mask;
+
+	/*
+	 * By first adding the chardev, and then adding the device,
+	 * we get a device node entry in sysfs under
+	 * /sys/bus/gpio/devices/gpiochipN/dev that can be used for
+	 * coldplug of device nodes and other udev business.
+	 * We can do this only if gpiolib has been initialized.
+	 * Otherwise, defer until later.
+	 */
+	if (gpiolib_initialized) {
+		ret = gpiochip_setup_dev(gdev);
+		if (ret)
+			goto err_remove_irqchip;
+	}
+	return 0;
+
+err_remove_irqchip:
+	gpiochip_irqchip_remove(gc);
+err_remove_irqchip_mask:
+	gpiochip_irqchip_free_valid_mask(gc);
+err_remove_acpi_chip:
+	acpi_gpiochip_remove(gc);
+err_remove_of_chip:
+	gpiochip_free_hogs(gc);
+	of_gpiochip_remove(gc);
+err_free_gpiochip_mask:
+	gpiochip_remove_pin_ranges(gc);
+	gpiochip_free_valid_mask(gc);
+err_remove_from_list:
+	spin_lock_irqsave(&gpio_lock, flags);
+	list_del(&gdev->list);
+	spin_unlock_irqrestore(&gpio_lock, flags);
+err_free_label:
+	kfree_const(gdev->label);
+err_free_descs:
+	kfree(gdev->descs);
+err_free_dev_name:
+	kfree(dev_name(&gdev->dev));
+err_free_ida:
+	ida_free(&gpio_ida, gdev->id);
+err_free_gdev:
+	/* failures here can mean systems won't boot... */
+	pr_err("%s: GPIOs %d..%d (%s) failed to register, %d\n", __func__,
+	       gdev->base, gdev->base + gdev->ngpio - 1,
+	       gc->label ? : "generic", ret);
+	kfree(gdev);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(gpiochip_add_data_with_key);
+
+/**
+ * gpiochip_get_data() - get per-subdriver data for the chip
+ * @gc: GPIO chip
+ *
+ * Returns:
+ * The per-subdriver data for the chip.
+ */
+void *gpiochip_get_data(struct gpio_chip *gc)
+{
+	return gc->gpiodev->data;
+}
+EXPORT_SYMBOL_GPL(gpiochip_get_data);
+
+/**
+ * gpiochip_remove() - unregister a gpio_chip
+ * @gc: the chip to unregister
+ *
+ * A gpio_chip with any GPIOs still requested may not be removed.
+ */
+void gpiochip_remove(struct gpio_chip *gc)
+{
+	struct gpio_device *gdev = gc->gpiodev;
+	unsigned long	flags;
+	unsigned int	i;
+
+	/* FIXME: should the legacy sysfs handling be moved to gpio_device? */
+	gpiochip_sysfs_unregister(gdev);
+	gpiochip_free_hogs(gc);
+	/* Numb the device, cancelling all outstanding operations */
+	gdev->chip = NULL;
+	gpiochip_irqchip_remove(gc);
+	acpi_gpiochip_remove(gc);
+	of_gpiochip_remove(gc);
+	gpiochip_remove_pin_ranges(gc);
+	gpiochip_free_valid_mask(gc);
+	/*
+	 * We accept no more calls into the driver from this point, so
+	 * NULL the driver data pointer
+	 */
+	gdev->data = NULL;
+
+	spin_lock_irqsave(&gpio_lock, flags);
+	for (i = 0; i < gdev->ngpio; i++) {
+		if (gpiochip_is_requested(gc, i))
+			break;
+	}
+	spin_unlock_irqrestore(&gpio_lock, flags);
+
+	if (i != gdev->ngpio)
+		dev_crit(&gdev->dev,
+			 "REMOVING GPIOCHIP WITH GPIOS STILL REQUESTED\n");
+
+	/*
+	 * The gpiochip side puts its use of the device to rest here:
+	 * if there are no userspace clients, the chardev and device will
+	 * be removed, else it will be dangling until the last user is
+	 * gone.
+	 */
+	gcdev_unregister(gdev);
+	put_device(&gdev->dev);
+}
+EXPORT_SYMBOL_GPL(gpiochip_remove);
+
+/**
+ * gpiochip_find() - iterator for locating a specific gpio_chip
+ * @data: data to pass to match function
+ * @match: Callback function to check gpio_chip
+ *
+ * Similar to bus_find_device.  It returns a reference to a gpio_chip as
+ * determined by a user supplied @match callback.  The callback should return
+ * 0 if the device doesn't match and non-zero if it does.  If the callback is
+ * non-zero, this function will return to the caller and not iterate over any
+ * more gpio_chips.
+ */
+struct gpio_chip *gpiochip_find(void *data,
+				int (*match)(struct gpio_chip *gc,
+					     void *data))
+{
+	struct gpio_device *gdev;
+	struct gpio_chip *gc = NULL;
+	unsigned long flags;
+
+	spin_lock_irqsave(&gpio_lock, flags);
+	list_for_each_entry(gdev, &gpio_devices, list)
+		if (gdev->chip && match(gdev->chip, data)) {
+			gc = gdev->chip;
+			break;
+		}
+
+	spin_unlock_irqrestore(&gpio_lock, flags);
+
+	return gc;
+}
+EXPORT_SYMBOL_GPL(gpiochip_find);
+
+static int gpiochip_match_name(struct gpio_chip *gc, void *data)
+{
+	const char *name = data;
+
+	return !strcmp(gc->label, name);
+}
+
+static struct gpio_chip *find_chip_by_name(const char *name)
+{
+	return gpiochip_find((void *)name, gpiochip_match_name);
+}
+
+#ifdef CONFIG_GPIOLIB_IRQCHIP
+
+/*
+ * The following is irqchip helper code for gpiochips.
+ */
+
+static int gpiochip_irqchip_init_hw(struct gpio_chip *gc)
+{
+	struct gpio_irq_chip *girq = &gc->irq;
+
+	if (!girq->init_hw)
+		return 0;
+
+	return girq->init_hw(gc);
+}
+
+static int gpiochip_irqchip_init_valid_mask(struct gpio_chip *gc)
+{
+	struct gpio_irq_chip *girq = &gc->irq;
+
+	if (!girq->init_valid_mask)
+		return 0;
+
+	girq->valid_mask = gpiochip_allocate_mask(gc);
+	if (!girq->valid_mask)
+		return -ENOMEM;
+
+	girq->init_valid_mask(gc, girq->valid_mask, gc->ngpio);
+
+	return 0;
+}
+
+static void gpiochip_irqchip_free_valid_mask(struct gpio_chip *gc)
+{
+	bitmap_free(gc->irq.valid_mask);
+	gc->irq.valid_mask = NULL;
+}
+
+bool gpiochip_irqchip_irq_valid(const struct gpio_chip *gc,
+				unsigned int offset)
+{
+	if (!gpiochip_line_is_valid(gc, offset))
+		return false;
+	/* No mask means all valid */
+	if (likely(!gc->irq.valid_mask))
+		return true;
+	return test_bit(offset, gc->irq.valid_mask);
+}
+EXPORT_SYMBOL_GPL(gpiochip_irqchip_irq_valid);
+
+/**
+ * gpiochip_set_cascaded_irqchip() - connects a cascaded irqchip to a gpiochip
+ * @gc: the gpiochip to set the irqchip chain to
+ * @parent_irq: the irq number corresponding to the parent IRQ for this
+ * cascaded irqchip
+ * @parent_handler: the parent interrupt handler for the accumulated IRQ
+ * coming out of the gpiochip. If the interrupt is nested rather than
+ * cascaded, pass NULL in this handler argument
+ */
+static void gpiochip_set_cascaded_irqchip(struct gpio_chip *gc,
+					  unsigned int parent_irq,
+					  irq_flow_handler_t parent_handler)
+{
+	struct gpio_irq_chip *girq = &gc->irq;
+	struct device *dev = &gc->gpiodev->dev;
+
+	if (!girq->domain) {
+		chip_err(gc, "called %s before setting up irqchip\n",
+			 __func__);
+		return;
+	}
+
+	if (parent_handler) {
+		if (gc->can_sleep) {
+			chip_err(gc,
+				 "you cannot have chained interrupts on a chip that may sleep\n");
+			return;
+		}
+		girq->parents = devm_kcalloc(dev, 1,
+					     sizeof(*girq->parents),
+					     GFP_KERNEL);
+		if (!girq->parents) {
+			chip_err(gc, "out of memory allocating parent IRQ\n");
+			return;
+		}
+		girq->parents[0] = parent_irq;
+		girq->num_parents = 1;
+		/*
+		 * The parent irqchip is already using the chip_data for this
+		 * irqchip, so our callbacks simply use the handler_data.
+		 */
+		irq_set_chained_handler_and_data(parent_irq, parent_handler,
+						 gc);
+	}
+}
+
+/**
+ * gpiochip_set_nested_irqchip() - connects a nested irqchip to a gpiochip
+ * @gc: the gpiochip to set the irqchip nested handler to
+ * @irqchip: the irqchip to nest to the gpiochip
+ * @parent_irq: the irq number corresponding to the parent IRQ for this
+ * nested irqchip
+ */
+void gpiochip_set_nested_irqchip(struct gpio_chip *gc,
+				 struct irq_chip *irqchip,
+				 unsigned int parent_irq)
+{
+	gpiochip_set_cascaded_irqchip(gc, parent_irq, NULL);
+}
+EXPORT_SYMBOL_GPL(gpiochip_set_nested_irqchip);
+
+#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
+
+/**
+ * gpiochip_set_hierarchical_irqchip() - connects a hierarchical irqchip
+ * to a gpiochip
+ * @gc: the gpiochip to set the irqchip hierarchical handler to
+ * @irqchip: the irqchip to handle this level of the hierarchy, the interrupt
+ * will then percolate up to the parent
+ */
+static void gpiochip_set_hierarchical_irqchip(struct gpio_chip *gc,
+					      struct irq_chip *irqchip)
+{
+	/* DT will deal with mapping each IRQ as we go along */
+	if (is_of_node(gc->irq.fwnode))
+		return;
+
+	/*
+	 * This is for legacy and boardfile "irqchip" fwnodes: allocate
+	 * irqs upfront instead of dynamically since we don't have the
+	 * dynamic type of allocation that hardware description languages
+	 * provide. Once all GPIO drivers using board files are gone from
+	 * the kernel we can delete this code, but for a transitional period
+	 * it is necessary to keep this around.
+	 */
+	if (is_fwnode_irqchip(gc->irq.fwnode)) {
+		int i;
+		int ret;
+
+		for (i = 0; i < gc->ngpio; i++) {
+			struct irq_fwspec fwspec;
+			unsigned int parent_hwirq;
+			unsigned int parent_type;
+			struct gpio_irq_chip *girq = &gc->irq;
+
+			/*
+			 * We call the child to parent translation function
+			 * only to check if the child IRQ is valid or not.
+			 * Just pick the rising edge type here as that is what
+			 * we likely need to support.
+			 */
+			ret = girq->child_to_parent_hwirq(gc, i,
+							  IRQ_TYPE_EDGE_RISING,
+							  &parent_hwirq,
+							  &parent_type);
+			if (ret) {
+				chip_err(gc, "skip set-up on hwirq %d\n",
+					 i);
+				continue;
+			}
+
+			fwspec.fwnode = gc->irq.fwnode;
+			/* This is the hwirq for the GPIO line side of things */
+			fwspec.param[0] = girq->child_offset_to_irq(gc, i);
+			/* Just pick something */
+			fwspec.param[1] = IRQ_TYPE_EDGE_RISING;
+			fwspec.param_count = 2;
+			ret = __irq_domain_alloc_irqs(gc->irq.domain,
+						      /* just pick something */
+						      -1,
+						      1,
+						      NUMA_NO_NODE,
+						      &fwspec,
+						      false,
+						      NULL);
+			if (ret < 0) {
+				chip_err(gc,
+					 "can not allocate irq for GPIO line %d parent hwirq %d in hierarchy domain: %d\n",
+					 i, parent_hwirq,
+					 ret);
+			}
+		}
+	}
+
+	chip_err(gc, "%s unknown fwnode type proceed anyway\n", __func__);
+
+	return;
+}
+
+static int gpiochip_hierarchy_irq_domain_translate(struct irq_domain *d,
+						   struct irq_fwspec *fwspec,
+						   unsigned long *hwirq,
+						   unsigned int *type)
+{
+	/* We support standard DT translation */
+	if (is_of_node(fwspec->fwnode) && fwspec->param_count == 2) {
+		return irq_domain_translate_twocell(d, fwspec, hwirq, type);
+	}
+
+	/* This is for board files and others not using DT */
+	if (is_fwnode_irqchip(fwspec->fwnode)) {
+		int ret;
+
+		ret = irq_domain_translate_twocell(d, fwspec, hwirq, type);
+		if (ret)
+			return ret;
+		WARN_ON(*type == IRQ_TYPE_NONE);
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static int gpiochip_hierarchy_irq_domain_alloc(struct irq_domain *d,
+					       unsigned int irq,
+					       unsigned int nr_irqs,
+					       void *data)
+{
+	struct gpio_chip *gc = d->host_data;
+	irq_hw_number_t hwirq;
+	unsigned int type = IRQ_TYPE_NONE;
+	struct irq_fwspec *fwspec = data;
+	void *parent_arg;
+	unsigned int parent_hwirq;
+	unsigned int parent_type;
+	struct gpio_irq_chip *girq = &gc->irq;
+	int ret;
+
+	/*
+	 * The nr_irqs parameter is always one except for PCI multi-MSI
+	 * so this should not happen.
+	 */
+	WARN_ON(nr_irqs != 1);
+
+	ret = gc->irq.child_irq_domain_ops.translate(d, fwspec, &hwirq, &type);
+	if (ret)
+		return ret;
+
+	chip_dbg(gc, "allocate IRQ %d, hwirq %lu\n", irq,  hwirq);
+
+	ret = girq->child_to_parent_hwirq(gc, hwirq, type,
+					  &parent_hwirq, &parent_type);
+	if (ret) {
+		chip_err(gc, "can't look up hwirq %lu\n", hwirq);
+		return ret;
+	}
+	chip_dbg(gc, "found parent hwirq %u\n", parent_hwirq);
+
+	/*
+	 * We set handle_bad_irq because the .set_type() should
+	 * always be invoked and set the right type of handler.
+	 */
+	irq_domain_set_info(d,
+			    irq,
+			    hwirq,
+			    gc->irq.chip,
+			    gc,
+			    girq->handler,
+			    NULL, NULL);
+	irq_set_probe(irq);
+
+	/* This parent only handles asserted level IRQs */
+	parent_arg = girq->populate_parent_alloc_arg(gc, parent_hwirq, parent_type);
+	if (!parent_arg)
+		return -ENOMEM;
+
+	chip_dbg(gc, "alloc_irqs_parent for %d parent hwirq %d\n",
+		  irq, parent_hwirq);
+	irq_set_lockdep_class(irq, gc->irq.lock_key, gc->irq.request_key);
+	ret = irq_domain_alloc_irqs_parent(d, irq, 1, parent_arg);
+	/*
+	 * If the parent irqdomain is msi, the interrupts have already
+	 * been allocated, so the EEXIST is good.
+	 */
+	if (irq_domain_is_msi(d->parent) && (ret == -EEXIST))
+		ret = 0;
+	if (ret)
+		chip_err(gc,
+			 "failed to allocate parent hwirq %d for hwirq %lu\n",
+			 parent_hwirq, hwirq);
+
+	kfree(parent_arg);
+	return ret;
+}
+
+static unsigned int gpiochip_child_offset_to_irq_noop(struct gpio_chip *gc,
+						      unsigned int offset)
+{
+	return offset;
+}
+
+static void gpiochip_hierarchy_setup_domain_ops(struct irq_domain_ops *ops)
+{
+	ops->activate = gpiochip_irq_domain_activate;
+	ops->deactivate = gpiochip_irq_domain_deactivate;
+	ops->alloc = gpiochip_hierarchy_irq_domain_alloc;
+	ops->free = irq_domain_free_irqs_common;
+
+	/*
+	 * We only allow overriding the translate() function for
+	 * hierarchical chips, and this should only be done if the user
+	 * really need something other than 1:1 translation.
+	 */
+	if (!ops->translate)
+		ops->translate = gpiochip_hierarchy_irq_domain_translate;
+}
+
+static int gpiochip_hierarchy_add_domain(struct gpio_chip *gc)
+{
+	if (!gc->irq.child_to_parent_hwirq ||
+	    !gc->irq.fwnode) {
+		chip_err(gc, "missing irqdomain vital data\n");
+		return -EINVAL;
+	}
+
+	if (!gc->irq.child_offset_to_irq)
+		gc->irq.child_offset_to_irq = gpiochip_child_offset_to_irq_noop;
+
+	if (!gc->irq.populate_parent_alloc_arg)
+		gc->irq.populate_parent_alloc_arg =
+			gpiochip_populate_parent_fwspec_twocell;
+
+	gpiochip_hierarchy_setup_domain_ops(&gc->irq.child_irq_domain_ops);
+
+	gc->irq.domain = irq_domain_create_hierarchy(
+		gc->irq.parent_domain,
+		0,
+		gc->ngpio,
+		gc->irq.fwnode,
+		&gc->irq.child_irq_domain_ops,
+		gc);
+
+	if (!gc->irq.domain)
+		return -ENOMEM;
+
+	gpiochip_set_hierarchical_irqchip(gc, gc->irq.chip);
+
+	return 0;
+}
+
+static bool gpiochip_hierarchy_is_hierarchical(struct gpio_chip *gc)
+{
+	return !!gc->irq.parent_domain;
+}
+
+void *gpiochip_populate_parent_fwspec_twocell(struct gpio_chip *gc,
+					     unsigned int parent_hwirq,
+					     unsigned int parent_type)
+{
+	struct irq_fwspec *fwspec;
+
+	fwspec = kmalloc(sizeof(*fwspec), GFP_KERNEL);
+	if (!fwspec)
+		return NULL;
+
+	fwspec->fwnode = gc->irq.parent_domain->fwnode;
+	fwspec->param_count = 2;
+	fwspec->param[0] = parent_hwirq;
+	fwspec->param[1] = parent_type;
+
+	return fwspec;
+}
+EXPORT_SYMBOL_GPL(gpiochip_populate_parent_fwspec_twocell);
+
+void *gpiochip_populate_parent_fwspec_fourcell(struct gpio_chip *gc,
+					      unsigned int parent_hwirq,
+					      unsigned int parent_type)
+{
+	struct irq_fwspec *fwspec;
+
+	fwspec = kmalloc(sizeof(*fwspec), GFP_KERNEL);
+	if (!fwspec)
+		return NULL;
+
+	fwspec->fwnode = gc->irq.parent_domain->fwnode;
+	fwspec->param_count = 4;
+	fwspec->param[0] = 0;
+	fwspec->param[1] = parent_hwirq;
+	fwspec->param[2] = 0;
+	fwspec->param[3] = parent_type;
+
+	return fwspec;
+}
+EXPORT_SYMBOL_GPL(gpiochip_populate_parent_fwspec_fourcell);
+
+#else
+
+static int gpiochip_hierarchy_add_domain(struct gpio_chip *gc)
+{
+	return -EINVAL;
+}
+
+static bool gpiochip_hierarchy_is_hierarchical(struct gpio_chip *gc)
+{
+	return false;
+}
+
+#endif /* CONFIG_IRQ_DOMAIN_HIERARCHY */
+
+/**
+ * gpiochip_irq_map() - maps an IRQ into a GPIO irqchip
+ * @d: the irqdomain used by this irqchip
+ * @irq: the global irq number used by this GPIO irqchip irq
+ * @hwirq: the local IRQ/GPIO line offset on this gpiochip
+ *
+ * This function will set up the mapping for a certain IRQ line on a
+ * gpiochip by assigning the gpiochip as chip data, and using the irqchip
+ * stored inside the gpiochip.
+ */
+int gpiochip_irq_map(struct irq_domain *d, unsigned int irq,
+		     irq_hw_number_t hwirq)
+{
+	struct gpio_chip *gc = d->host_data;
+	int ret = 0;
+
+	if (!gpiochip_irqchip_irq_valid(gc, hwirq))
+		return -ENXIO;
+
+	irq_set_chip_data(irq, gc);
+	/*
+	 * This lock class tells lockdep that GPIO irqs are in a different
+	 * category than their parents, so it won't report false recursion.
+	 */
+	irq_set_lockdep_class(irq, gc->irq.lock_key, gc->irq.request_key);
+	irq_set_chip_and_handler(irq, gc->irq.chip, gc->irq.handler);
+	/* Chips that use nested thread handlers have them marked */
+	if (gc->irq.threaded)
+		irq_set_nested_thread(irq, 1);
+	irq_set_noprobe(irq);
+
+	if (gc->irq.num_parents == 1)
+		ret = irq_set_parent(irq, gc->irq.parents[0]);
+	else if (gc->irq.map)
+		ret = irq_set_parent(irq, gc->irq.map[hwirq]);
+
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * No set-up of the hardware will happen if IRQ_TYPE_NONE
+	 * is passed as default type.
+	 */
+	if (gc->irq.default_type != IRQ_TYPE_NONE)
+		irq_set_irq_type(irq, gc->irq.default_type);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(gpiochip_irq_map);
+
+void gpiochip_irq_unmap(struct irq_domain *d, unsigned int irq)
+{
+	struct gpio_chip *gc = d->host_data;
+
+	if (gc->irq.threaded)
+		irq_set_nested_thread(irq, 0);
+	irq_set_chip_and_handler(irq, NULL, NULL);
+	irq_set_chip_data(irq, NULL);
+}
+EXPORT_SYMBOL_GPL(gpiochip_irq_unmap);
+
+static const struct irq_domain_ops gpiochip_domain_ops = {
+	.map	= gpiochip_irq_map,
+	.unmap	= gpiochip_irq_unmap,
+	/* Virtually all GPIO irqchips are twocell:ed */
+	.xlate	= irq_domain_xlate_twocell,
+};
+
+/*
+ * TODO: move these activate/deactivate in under the hierarchicial
+ * irqchip implementation as static once SPMI and SSBI (all external
+ * users) are phased over.
+ */
+/**
+ * gpiochip_irq_domain_activate() - Lock a GPIO to be used as an IRQ
+ * @domain: The IRQ domain used by this IRQ chip
+ * @data: Outermost irq_data associated with the IRQ
+ * @reserve: If set, only reserve an interrupt vector instead of assigning one
+ *
+ * This function is a wrapper that calls gpiochip_lock_as_irq() and is to be
+ * used as the activate function for the &struct irq_domain_ops. The host_data
+ * for the IRQ domain must be the &struct gpio_chip.
+ */
+int gpiochip_irq_domain_activate(struct irq_domain *domain,
+				 struct irq_data *data, bool reserve)
+{
+	struct gpio_chip *gc = domain->host_data;
+
+	return gpiochip_lock_as_irq(gc, data->hwirq);
+}
+EXPORT_SYMBOL_GPL(gpiochip_irq_domain_activate);
+
+/**
+ * gpiochip_irq_domain_deactivate() - Unlock a GPIO used as an IRQ
+ * @domain: The IRQ domain used by this IRQ chip
+ * @data: Outermost irq_data associated with the IRQ
+ *
+ * This function is a wrapper that will call gpiochip_unlock_as_irq() and is to
+ * be used as the deactivate function for the &struct irq_domain_ops. The
+ * host_data for the IRQ domain must be the &struct gpio_chip.
+ */
+void gpiochip_irq_domain_deactivate(struct irq_domain *domain,
+				    struct irq_data *data)
+{
+	struct gpio_chip *gc = domain->host_data;
+
+	return gpiochip_unlock_as_irq(gc, data->hwirq);
+}
+EXPORT_SYMBOL_GPL(gpiochip_irq_domain_deactivate);
+
+static int gpiochip_to_irq(struct gpio_chip *gc, unsigned offset)
+{
+	struct irq_domain *domain = gc->irq.domain;
+
+#ifdef CONFIG_GPIOLIB_IRQCHIP
+	/*
+	 * Avoid race condition with other code, which tries to lookup
+	 * an IRQ before the irqchip has been properly registered,
+	 * i.e. while gpiochip is still being brought up.
+	 */
+	if (!gc->irq.initialized)
+		return -EPROBE_DEFER;
+#endif
+
+	if (!gpiochip_irqchip_irq_valid(gc, offset))
+		return -ENXIO;
+
+#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
+	if (irq_domain_is_hierarchy(domain)) {
+		struct irq_fwspec spec;
+
+		spec.fwnode = domain->fwnode;
+		spec.param_count = 2;
+		spec.param[0] = gc->irq.child_offset_to_irq(gc, offset);
+		spec.param[1] = IRQ_TYPE_NONE;
+
+		return irq_create_fwspec_mapping(&spec);
+	}
+#endif
+
+	return irq_create_mapping(domain, offset);
+}
+
+static int gpiochip_irq_reqres(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+
+	return gpiochip_reqres_irq(gc, d->hwirq);
+}
+
+static void gpiochip_irq_relres(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+
+	gpiochip_relres_irq(gc, d->hwirq);
+}
+
+static void gpiochip_irq_mask(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+
+	if (gc->irq.irq_mask)
+		gc->irq.irq_mask(d);
+	gpiochip_disable_irq(gc, d->hwirq);
+}
+
+static void gpiochip_irq_unmask(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+
+	gpiochip_enable_irq(gc, d->hwirq);
+	if (gc->irq.irq_unmask)
+		gc->irq.irq_unmask(d);
+}
+
+static void gpiochip_irq_enable(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+
+	gpiochip_enable_irq(gc, d->hwirq);
+	gc->irq.irq_enable(d);
+}
+
+static void gpiochip_irq_disable(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+
+	gc->irq.irq_disable(d);
+	gpiochip_disable_irq(gc, d->hwirq);
+}
+
+static void gpiochip_set_irq_hooks(struct gpio_chip *gc)
+{
+	struct irq_chip *irqchip = gc->irq.chip;
+
+	if (!irqchip->irq_request_resources &&
+	    !irqchip->irq_release_resources) {
+		irqchip->irq_request_resources = gpiochip_irq_reqres;
+		irqchip->irq_release_resources = gpiochip_irq_relres;
+	}
+	if (WARN_ON(gc->irq.irq_enable))
+		return;
+	/* Check if the irqchip already has this hook... */
+	if (irqchip->irq_enable == gpiochip_irq_enable ||
+		irqchip->irq_mask == gpiochip_irq_mask) {
+		/*
+		 * ...and if so, give a gentle warning that this is bad
+		 * practice.
+		 */
+		chip_info(gc,
+			  "detected irqchip that is shared with multiple gpiochips: please fix the driver.\n");
+		return;
+	}
+
+	if (irqchip->irq_disable) {
+		gc->irq.irq_disable = irqchip->irq_disable;
+		irqchip->irq_disable = gpiochip_irq_disable;
+	} else {
+		gc->irq.irq_mask = irqchip->irq_mask;
+		irqchip->irq_mask = gpiochip_irq_mask;
+	}
+
+	if (irqchip->irq_enable) {
+		gc->irq.irq_enable = irqchip->irq_enable;
+		irqchip->irq_enable = gpiochip_irq_enable;
+	} else {
+		gc->irq.irq_unmask = irqchip->irq_unmask;
+		irqchip->irq_unmask = gpiochip_irq_unmask;
+	}
+}
+
+/**
+ * gpiochip_add_irqchip() - adds an IRQ chip to a GPIO chip
+ * @gc: the GPIO chip to add the IRQ chip to
+ * @lock_key: lockdep class for IRQ lock
+ * @request_key: lockdep class for IRQ request
+ */
+static int gpiochip_add_irqchip(struct gpio_chip *gc,
+				struct lock_class_key *lock_key,
+				struct lock_class_key *request_key)
+{
+	struct irq_chip *irqchip = gc->irq.chip;
+	const struct irq_domain_ops *ops = NULL;
+	struct device_node *np;
+	unsigned int type;
+	unsigned int i;
+
+	if (!irqchip)
+		return 0;
+
+	if (gc->irq.parent_handler && gc->can_sleep) {
+		chip_err(gc, "you cannot have chained interrupts on a chip that may sleep\n");
+		return -EINVAL;
+	}
+
+	np = gc->gpiodev->dev.of_node;
+	type = gc->irq.default_type;
+
+	/*
+	 * Specifying a default trigger is a terrible idea if DT or ACPI is
+	 * used to configure the interrupts, as you may end up with
+	 * conflicting triggers. Tell the user, and reset to NONE.
+	 */
+	if (WARN(np && type != IRQ_TYPE_NONE,
+		 "%s: Ignoring %u default trigger\n", np->full_name, type))
+		type = IRQ_TYPE_NONE;
+
+	if (has_acpi_companion(gc->parent) && type != IRQ_TYPE_NONE) {
+		acpi_handle_warn(ACPI_HANDLE(gc->parent),
+				 "Ignoring %u default trigger\n", type);
+		type = IRQ_TYPE_NONE;
+	}
+
+	gc->to_irq = gpiochip_to_irq;
+	gc->irq.default_type = type;
+	gc->irq.lock_key = lock_key;
+	gc->irq.request_key = request_key;
+
+	/* If a parent irqdomain is provided, let's build a hierarchy */
+	if (gpiochip_hierarchy_is_hierarchical(gc)) {
+		int ret = gpiochip_hierarchy_add_domain(gc);
+		if (ret)
+			return ret;
+	} else {
+		/* Some drivers provide custom irqdomain ops */
+		if (gc->irq.domain_ops)
+			ops = gc->irq.domain_ops;
+
+		if (!ops)
+			ops = &gpiochip_domain_ops;
+		gc->irq.domain = irq_domain_add_simple(np,
+			gc->ngpio,
+			gc->irq.first,
+			ops, gc);
+		if (!gc->irq.domain)
+			return -EINVAL;
+	}
+
+	if (gc->irq.parent_handler) {
+		for (i = 0; i < gc->irq.num_parents; i++) {
+			void *data;
+
+			if (gc->irq.per_parent_data)
+				data = gc->irq.parent_handler_data_array[i];
+			else
+				data = gc->irq.parent_handler_data ?: gc;
+
+			/*
+			 * The parent IRQ chip is already using the chip_data
+			 * for this IRQ chip, so our callbacks simply use the
+			 * handler_data.
+			 */
+			irq_set_chained_handler_and_data(gc->irq.parents[i],
+							 gc->irq.parent_handler,
+							 data);
+		}
+	}
+
+	gpiochip_set_irq_hooks(gc);
+
+	/*
+	 * Using barrier() here to prevent compiler from reordering
+	 * gc->irq.initialized before initialization of above
+	 * GPIO chip irq members.
+	 */
+	barrier();
+
+	gc->irq.initialized = true;
+
+	acpi_gpiochip_request_interrupts(gc);
+
+	return 0;
+}
+
+/**
+ * gpiochip_irqchip_remove() - removes an irqchip added to a gpiochip
+ * @gc: the gpiochip to remove the irqchip from
+ *
+ * This is called only from gpiochip_remove()
+ */
+static void gpiochip_irqchip_remove(struct gpio_chip *gc)
+{
+	struct irq_chip *irqchip = gc->irq.chip;
+	unsigned int offset;
+
+	acpi_gpiochip_free_interrupts(gc);
+
+	if (irqchip && gc->irq.parent_handler) {
+		struct gpio_irq_chip *irq = &gc->irq;
+		unsigned int i;
+
+		for (i = 0; i < irq->num_parents; i++)
+			irq_set_chained_handler_and_data(irq->parents[i],
+							 NULL, NULL);
+	}
+
+	/* Remove all IRQ mappings and delete the domain */
+	if (gc->irq.domain) {
+		unsigned int irq;
+
+		for (offset = 0; offset < gc->ngpio; offset++) {
+			if (!gpiochip_irqchip_irq_valid(gc, offset))
+				continue;
+
+			irq = irq_find_mapping(gc->irq.domain, offset);
+			irq_dispose_mapping(irq);
+		}
+
+		irq_domain_remove(gc->irq.domain);
+	}
+
+	if (irqchip) {
+		if (irqchip->irq_request_resources == gpiochip_irq_reqres) {
+			irqchip->irq_request_resources = NULL;
+			irqchip->irq_release_resources = NULL;
+		}
+		if (irqchip->irq_enable == gpiochip_irq_enable) {
+			irqchip->irq_enable = gc->irq.irq_enable;
+			irqchip->irq_disable = gc->irq.irq_disable;
+		}
+	}
+	gc->irq.irq_enable = NULL;
+	gc->irq.irq_disable = NULL;
+	gc->irq.chip = NULL;
+
+	gpiochip_irqchip_free_valid_mask(gc);
+}
+
+/**
+ * gpiochip_irqchip_add_key() - adds an irqchip to a gpiochip
+ * @gc: the gpiochip to add the irqchip to
+ * @irqchip: the irqchip to add to the gpiochip
+ * @first_irq: if not dynamically assigned, the base (first) IRQ to
+ * allocate gpiochip irqs from
+ * @handler: the irq handler to use (often a predefined irq core function)
+ * @type: the default type for IRQs on this irqchip, pass IRQ_TYPE_NONE
+ * to have the core avoid setting up any default type in the hardware.
+ * @threaded: whether this irqchip uses a nested thread handler
+ * @lock_key: lockdep class for IRQ lock
+ * @request_key: lockdep class for IRQ request
+ *
+ * This function closely associates a certain irqchip with a certain
+ * gpiochip, providing an irq domain to translate the local IRQs to
+ * global irqs in the gpiolib core, and making sure that the gpiochip
+ * is passed as chip data to all related functions. Driver callbacks
+ * need to use gpiochip_get_data() to get their local state containers back
+ * from the gpiochip passed as chip data. An irqdomain will be stored
+ * in the gpiochip that shall be used by the driver to handle IRQ number
+ * translation. The gpiochip will need to be initialized and registered
+ * before calling this function.
+ *
+ * This function will handle two cell:ed simple IRQs and assumes all
+ * the pins on the gpiochip can generate a unique IRQ. Everything else
+ * need to be open coded.
+ */
+int gpiochip_irqchip_add_key(struct gpio_chip *gc,
+			     struct irq_chip *irqchip,
+			     unsigned int first_irq,
+			     irq_flow_handler_t handler,
+			     unsigned int type,
+			     bool threaded,
+			     struct lock_class_key *lock_key,
+			     struct lock_class_key *request_key)
+{
+	struct device_node *of_node;
+
+	if (!gc || !irqchip)
+		return -EINVAL;
+
+	if (!gc->parent) {
+		chip_err(gc, "missing gpiochip .dev parent pointer\n");
+		return -EINVAL;
+	}
+	gc->irq.threaded = threaded;
+	of_node = gc->parent->of_node;
+#ifdef CONFIG_OF_GPIO
+	/*
+	 * If the gpiochip has an assigned OF node this takes precedence
+	 * FIXME: get rid of this and use gc->parent->of_node
+	 * everywhere
+	 */
+	if (gc->of_node)
+		of_node = gc->of_node;
+#endif
+	/*
+	 * Specifying a default trigger is a terrible idea if DT or ACPI is
+	 * used to configure the interrupts, as you may end-up with
+	 * conflicting triggers. Tell the user, and reset to NONE.
+	 */
+	if (WARN(of_node && type != IRQ_TYPE_NONE,
+		 "%pOF: Ignoring %d default trigger\n", of_node, type))
+		type = IRQ_TYPE_NONE;
+	if (has_acpi_companion(gc->parent) && type != IRQ_TYPE_NONE) {
+		acpi_handle_warn(ACPI_HANDLE(gc->parent),
+				 "Ignoring %d default trigger\n", type);
+		type = IRQ_TYPE_NONE;
+	}
+
+	gc->irq.chip = irqchip;
+	gc->irq.handler = handler;
+	gc->irq.default_type = type;
+	gc->to_irq = gpiochip_to_irq;
+	gc->irq.lock_key = lock_key;
+	gc->irq.request_key = request_key;
+	gc->irq.domain = irq_domain_add_simple(of_node,
+					gc->ngpio, first_irq,
+					&gpiochip_domain_ops, gc);
+	if (!gc->irq.domain) {
+		gc->irq.chip = NULL;
+		return -EINVAL;
+	}
+
+	gpiochip_set_irq_hooks(gc);
+
+	acpi_gpiochip_request_interrupts(gc);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(gpiochip_irqchip_add_key);
+
+/**
+ * gpiochip_irqchip_add_domain() - adds an irqdomain to a gpiochip
+ * @gc: the gpiochip to add the irqchip to
+ * @domain: the irqdomain to add to the gpiochip
+ *
+ * This function adds an IRQ domain to the gpiochip.
+ */
+int gpiochip_irqchip_add_domain(struct gpio_chip *gc,
+				struct irq_domain *domain)
+{
+	if (!domain)
+		return -EINVAL;
+
+	gc->to_irq = gpiochip_to_irq;
+	gc->irq.domain = domain;
+
+	/*
+	 * Using barrier() here to prevent compiler from reordering
+	 * gc->irq.initialized before adding irqdomain.
+	 */
+	barrier();
+
+	gc->irq.initialized = true;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(gpiochip_irqchip_add_domain);
+
+#else /* CONFIG_GPIOLIB_IRQCHIP */
+
+static inline int gpiochip_add_irqchip(struct gpio_chip *gc,
+				       struct lock_class_key *lock_key,
+				       struct lock_class_key *request_key)
+{
+	return 0;
+}
+static void gpiochip_irqchip_remove(struct gpio_chip *gc) {}
+
+static inline int gpiochip_irqchip_init_hw(struct gpio_chip *gc)
+{
+	return 0;
+}
+
+static inline int gpiochip_irqchip_init_valid_mask(struct gpio_chip *gc)
+{
+	return 0;
+}
+static inline void gpiochip_irqchip_free_valid_mask(struct gpio_chip *gc)
+{ }
+
+#endif /* CONFIG_GPIOLIB_IRQCHIP */
+
+/**
+ * gpiochip_generic_request() - request the gpio function for a pin
+ * @gc: the gpiochip owning the GPIO
+ * @offset: the offset of the GPIO to request for GPIO function
+ */
+int gpiochip_generic_request(struct gpio_chip *gc, unsigned offset)
+{
+#ifdef CONFIG_PINCTRL
+	if (list_empty(&gc->gpiodev->pin_ranges))
+		return 0;
+#endif
+
+	return pinctrl_gpio_request(gc->gpiodev->base + offset);
+}
+EXPORT_SYMBOL_GPL(gpiochip_generic_request);
+
+/**
+ * gpiochip_generic_free() - free the gpio function from a pin
+ * @gc: the gpiochip to request the gpio function for
+ * @offset: the offset of the GPIO to free from GPIO function
+ */
+void gpiochip_generic_free(struct gpio_chip *gc, unsigned offset)
+{
+#ifdef CONFIG_PINCTRL
+	if (list_empty(&gc->gpiodev->pin_ranges))
+		return;
+#endif
+
+	pinctrl_gpio_free(gc->gpiodev->base + offset);
+}
+EXPORT_SYMBOL_GPL(gpiochip_generic_free);
+
+/**
+ * gpiochip_generic_config() - apply configuration for a pin
+ * @gc: the gpiochip owning the GPIO
+ * @offset: the offset of the GPIO to apply the configuration
+ * @config: the configuration to be applied
+ */
+int gpiochip_generic_config(struct gpio_chip *gc, unsigned offset,
+			    unsigned long config)
+{
+	return pinctrl_gpio_set_config(gc->gpiodev->base + offset, config);
+}
+EXPORT_SYMBOL_GPL(gpiochip_generic_config);
+
+#ifdef CONFIG_PINCTRL
+
+/**
+ * gpiochip_add_pingroup_range() - add a range for GPIO <-> pin mapping
+ * @gc: the gpiochip to add the range for
+ * @pctldev: the pin controller to map to
+ * @gpio_offset: the start offset in the current gpio_chip number space
+ * @pin_group: name of the pin group inside the pin controller
+ *
+ * Calling this function directly from a DeviceTree-supported
+ * pinctrl driver is DEPRECATED. Please see Section 2.1 of
+ * Documentation/devicetree/bindings/gpio/gpio.txt on how to
+ * bind pinctrl and gpio drivers via the "gpio-ranges" property.
+ */
+int gpiochip_add_pingroup_range(struct gpio_chip *gc,
+			struct pinctrl_dev *pctldev,
+			unsigned int gpio_offset, const char *pin_group)
+{
+	struct gpio_pin_range *pin_range;
+	struct gpio_device *gdev = gc->gpiodev;
+	int ret;
+
+	pin_range = kzalloc(sizeof(*pin_range), GFP_KERNEL);
+	if (!pin_range) {
+		chip_err(gc, "failed to allocate pin ranges\n");
+		return -ENOMEM;
+	}
+
+	/* Use local offset as range ID */
+	pin_range->range.id = gpio_offset;
+	pin_range->range.gc = gc;
+	pin_range->range.name = gc->label;
+	pin_range->range.base = gdev->base + gpio_offset;
+	pin_range->pctldev = pctldev;
+
+	ret = pinctrl_get_group_pins(pctldev, pin_group,
+					&pin_range->range.pins,
+					&pin_range->range.npins);
+	if (ret < 0) {
+		kfree(pin_range);
+		return ret;
+	}
+
+	pinctrl_add_gpio_range(pctldev, &pin_range->range);
+
+	chip_dbg(gc, "created GPIO range %d->%d ==> %s PINGRP %s\n",
+		 gpio_offset, gpio_offset + pin_range->range.npins - 1,
+		 pinctrl_dev_get_devname(pctldev), pin_group);
+
+	list_add_tail(&pin_range->node, &gdev->pin_ranges);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(gpiochip_add_pingroup_range);
+
+/**
+ * gpiochip_add_pin_range() - add a range for GPIO <-> pin mapping
+ * @gc: the gpiochip to add the range for
+ * @pinctl_name: the dev_name() of the pin controller to map to
+ * @gpio_offset: the start offset in the current gpio_chip number space
+ * @pin_offset: the start offset in the pin controller number space
+ * @npins: the number of pins from the offset of each pin space (GPIO and
+ *	pin controller) to accumulate in this range
+ *
+ * Returns:
+ * 0 on success, or a negative error-code on failure.
+ *
+ * Calling this function directly from a DeviceTree-supported
+ * pinctrl driver is DEPRECATED. Please see Section 2.1 of
+ * Documentation/devicetree/bindings/gpio/gpio.txt on how to
+ * bind pinctrl and gpio drivers via the "gpio-ranges" property.
+ */
+int gpiochip_add_pin_range(struct gpio_chip *gc, const char *pinctl_name,
+			   unsigned int gpio_offset, unsigned int pin_offset,
+			   unsigned int npins)
+{
+	struct gpio_pin_range *pin_range;
+	struct gpio_device *gdev = gc->gpiodev;
+	int ret;
+
+	pin_range = kzalloc(sizeof(*pin_range), GFP_KERNEL);
+	if (!pin_range) {
+		chip_err(gc, "failed to allocate pin ranges\n");
+		return -ENOMEM;
+	}
+
+	/* Use local offset as range ID */
+	pin_range->range.id = gpio_offset;
+	pin_range->range.gc = gc;
+	pin_range->range.name = gc->label;
+	pin_range->range.base = gdev->base + gpio_offset;
+	pin_range->range.pin_base = pin_offset;
+	pin_range->range.npins = npins;
+	pin_range->pctldev = pinctrl_find_and_add_gpio_range(pinctl_name,
+			&pin_range->range);
+	if (IS_ERR(pin_range->pctldev)) {
+		ret = PTR_ERR(pin_range->pctldev);
+		chip_err(gc, "could not create pin range\n");
+		kfree(pin_range);
+		return ret;
+	}
+	chip_dbg(gc, "created GPIO range %d->%d ==> %s PIN %d->%d\n",
+		 gpio_offset, gpio_offset + npins - 1,
+		 pinctl_name,
+		 pin_offset, pin_offset + npins - 1);
+
+	list_add_tail(&pin_range->node, &gdev->pin_ranges);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(gpiochip_add_pin_range);
+
+/**
+ * gpiochip_remove_pin_ranges() - remove all the GPIO <-> pin mappings
+ * @gc: the chip to remove all the mappings for
+ */
+void gpiochip_remove_pin_ranges(struct gpio_chip *gc)
+{
+	struct gpio_pin_range *pin_range, *tmp;
+	struct gpio_device *gdev = gc->gpiodev;
+
+	list_for_each_entry_safe(pin_range, tmp, &gdev->pin_ranges, node) {
+		list_del(&pin_range->node);
+		pinctrl_remove_gpio_range(pin_range->pctldev,
+				&pin_range->range);
+		kfree(pin_range);
+	}
+}
+EXPORT_SYMBOL_GPL(gpiochip_remove_pin_ranges);
+
+#endif /* CONFIG_PINCTRL */
+
+/* These "optional" allocation calls help prevent drivers from stomping
+ * on each other, and help provide better diagnostics in debugfs.
+ * They're called even less than the "set direction" calls.
+ */
+static int gpiod_request_commit(struct gpio_desc *desc, const char *label)
+{
+	struct gpio_chip	*gc = desc->gdev->chip;
+	int			ret;
+	unsigned long		flags;
+	unsigned		offset;
+
+	if (label) {
+		label = kstrdup_const(label, GFP_KERNEL);
+		if (!label)
+			return -ENOMEM;
+	}
+
+	spin_lock_irqsave(&gpio_lock, flags);
+
+	/* NOTE:  gpio_request() can be called in early boot,
+	 * before IRQs are enabled, for non-sleeping (SOC) GPIOs.
+	 */
+
+	if (test_and_set_bit(FLAG_REQUESTED, &desc->flags) == 0) {
+		desc_set_label(desc, label ? : "?");
+		ret = 0;
+	} else {
+		kfree_const(label);
+		ret = -EBUSY;
+		goto done;
+	}
+
+	if (gc->request) {
+		/* gc->request may sleep */
+		spin_unlock_irqrestore(&gpio_lock, flags);
+		offset = gpio_chip_hwgpio(desc);
+		if (gpiochip_line_is_valid(gc, offset))
+			ret = gc->request(gc, offset);
+		else
+			ret = -EINVAL;
+		spin_lock_irqsave(&gpio_lock, flags);
+
+		if (ret < 0) {
+			desc_set_label(desc, NULL);
+			kfree_const(label);
+			clear_bit(FLAG_REQUESTED, &desc->flags);
+			goto done;
+		}
+	}
+	if (gc->get_direction) {
+		/* gc->get_direction may sleep */
+		spin_unlock_irqrestore(&gpio_lock, flags);
+		gpiod_get_direction(desc);
+		spin_lock_irqsave(&gpio_lock, flags);
+	}
+done:
+	spin_unlock_irqrestore(&gpio_lock, flags);
+	return ret;
+}
+
+/*
+ * This descriptor validation needs to be inserted verbatim into each
+ * function taking a descriptor, so we need to use a preprocessor
+ * macro to avoid endless duplication. If the desc is NULL it is an
+ * optional GPIO and calls should just bail out.
+ */
+static int validate_desc(const struct gpio_desc *desc, const char *func)
+{
+	if (!desc)
+		return 0;
+	if (IS_ERR(desc)) {
+		pr_warn("%s: invalid GPIO (errorpointer)\n", func);
+		return PTR_ERR(desc);
+	}
+	if (!desc->gdev) {
+		pr_warn("%s: invalid GPIO (no device)\n", func);
+		return -EINVAL;
+	}
+	if (!desc->gdev->chip) {
+		dev_warn(&desc->gdev->dev,
+			 "%s: backing chip is gone\n", func);
+		return 0;
+	}
+	return 1;
+}
+
+#define VALIDATE_DESC(desc) do { \
+	int __valid = validate_desc(desc, __func__); \
+	if (__valid <= 0) \
+		return __valid; \
+	} while (0)
+
+#define VALIDATE_DESC_VOID(desc) do { \
+	int __valid = validate_desc(desc, __func__); \
+	if (__valid <= 0) \
+		return; \
+	} while (0)
+
+int gpiod_request(struct gpio_desc *desc, const char *label)
+{
+	int ret = -EPROBE_DEFER;
+	struct gpio_device *gdev;
+
+	VALIDATE_DESC(desc);
+	gdev = desc->gdev;
+
+	if (try_module_get(gdev->owner)) {
+		ret = gpiod_request_commit(desc, label);
+		if (ret < 0)
+			module_put(gdev->owner);
+		else
+			get_device(&gdev->dev);
+	}
+
+	if (ret)
+		gpiod_dbg(desc, "%s: status %d\n", __func__, ret);
+
+	return ret;
+}
+
+static bool gpiod_free_commit(struct gpio_desc *desc)
+{
+	bool			ret = false;
+	unsigned long		flags;
+	struct gpio_chip	*gc;
+
+	might_sleep();
+
+	gpiod_unexport(desc);
+
+	spin_lock_irqsave(&gpio_lock, flags);
+
+	gc = desc->gdev->chip;
+	if (gc && test_bit(FLAG_REQUESTED, &desc->flags)) {
+		if (gc->free) {
+			spin_unlock_irqrestore(&gpio_lock, flags);
+			might_sleep_if(gc->can_sleep);
+			gc->free(gc, gpio_chip_hwgpio(desc));
+			spin_lock_irqsave(&gpio_lock, flags);
+		}
+		kfree_const(desc->label);
+		desc_set_label(desc, NULL);
+		clear_bit(FLAG_ACTIVE_LOW, &desc->flags);
+		clear_bit(FLAG_REQUESTED, &desc->flags);
+		clear_bit(FLAG_OPEN_DRAIN, &desc->flags);
+		clear_bit(FLAG_OPEN_SOURCE, &desc->flags);
+		clear_bit(FLAG_PULL_UP, &desc->flags);
+		clear_bit(FLAG_PULL_DOWN, &desc->flags);
+		clear_bit(FLAG_BIAS_DISABLE, &desc->flags);
+		clear_bit(FLAG_EDGE_RISING, &desc->flags);
+		clear_bit(FLAG_EDGE_FALLING, &desc->flags);
+		clear_bit(FLAG_IS_HOGGED, &desc->flags);
+#ifdef CONFIG_OF_DYNAMIC
+		desc->hog = NULL;
+#endif
+#ifdef CONFIG_GPIO_CDEV
+		WRITE_ONCE(desc->debounce_period_us, 0);
+#endif
+		ret = true;
+	}
+
+	spin_unlock_irqrestore(&gpio_lock, flags);
+	blocking_notifier_call_chain(&desc->gdev->notifier,
+				     GPIOLINE_CHANGED_RELEASED, desc);
+
+	return ret;
+}
+
+void gpiod_free(struct gpio_desc *desc)
+{
+	if (desc && desc->gdev && gpiod_free_commit(desc)) {
+		module_put(desc->gdev->owner);
+		put_device(&desc->gdev->dev);
+	} else {
+		WARN_ON(extra_checks);
+	}
+}
+
+/**
+ * gpiochip_is_requested - return string iff signal was requested
+ * @gc: controller managing the signal
+ * @offset: of signal within controller's 0..(ngpio - 1) range
+ *
+ * Returns NULL if the GPIO is not currently requested, else a string.
+ * The string returned is the label passed to gpio_request(); if none has been
+ * passed it is a meaningless, non-NULL constant.
+ *
+ * This function is for use by GPIO controller drivers.  The label can
+ * help with diagnostics, and knowing that the signal is used as a GPIO
+ * can help avoid accidentally multiplexing it to another controller.
+ */
+const char *gpiochip_is_requested(struct gpio_chip *gc, unsigned offset)
+{
+	struct gpio_desc *desc;
+
+	if (offset >= gc->ngpio)
+		return NULL;
+
+	desc = gpiochip_get_desc(gc, offset);
+	if (IS_ERR(desc))
+		return NULL;
+
+	if (test_bit(FLAG_REQUESTED, &desc->flags) == 0)
+		return NULL;
+	return desc->label;
+}
+EXPORT_SYMBOL_GPL(gpiochip_is_requested);
+
+/**
+ * gpiochip_request_own_desc - Allow GPIO chip to request its own descriptor
+ * @gc: GPIO chip
+ * @hwnum: hardware number of the GPIO for which to request the descriptor
+ * @label: label for the GPIO
+ * @lflags: lookup flags for this GPIO or 0 if default, this can be used to
+ * specify things like line inversion semantics with the machine flags
+ * such as GPIO_OUT_LOW
+ * @dflags: descriptor request flags for this GPIO or 0 if default, this
+ * can be used to specify consumer semantics such as open drain
+ *
+ * Function allows GPIO chip drivers to request and use their own GPIO
+ * descriptors via gpiolib API. Difference to gpiod_request() is that this
+ * function will not increase reference count of the GPIO chip module. This
+ * allows the GPIO chip module to be unloaded as needed (we assume that the
+ * GPIO chip driver handles freeing the GPIOs it has requested).
+ *
+ * Returns:
+ * A pointer to the GPIO descriptor, or an ERR_PTR()-encoded negative error
+ * code on failure.
+ */
+struct gpio_desc *gpiochip_request_own_desc(struct gpio_chip *gc,
+					    unsigned int hwnum,
+					    const char *label,
+					    enum gpio_lookup_flags lflags,
+					    enum gpiod_flags dflags)
+{
+	struct gpio_desc *desc = gpiochip_get_desc(gc, hwnum);
+	int ret;
+
+	if (IS_ERR(desc)) {
+		chip_err(gc, "failed to get GPIO descriptor\n");
+		return desc;
+	}
+
+	ret = gpiod_request_commit(desc, label);
+	if (ret < 0)
+		return ERR_PTR(ret);
+
+	ret = gpiod_configure_flags(desc, label, lflags, dflags);
+	if (ret) {
+		chip_err(gc, "setup of own GPIO %s failed\n", label);
+		gpiod_free_commit(desc);
+		return ERR_PTR(ret);
+	}
+
+	return desc;
+}
+EXPORT_SYMBOL_GPL(gpiochip_request_own_desc);
+
+/**
+ * gpiochip_free_own_desc - Free GPIO requested by the chip driver
+ * @desc: GPIO descriptor to free
+ *
+ * Function frees the given GPIO requested previously with
+ * gpiochip_request_own_desc().
+ */
+void gpiochip_free_own_desc(struct gpio_desc *desc)
+{
+	if (desc)
+		gpiod_free_commit(desc);
+}
+EXPORT_SYMBOL_GPL(gpiochip_free_own_desc);
+
+/*
+ * Drivers MUST set GPIO direction before making get/set calls.  In
+ * some cases this is done in early boot, before IRQs are enabled.
+ *
+ * As a rule these aren't called more than once (except for drivers
+ * using the open-drain emulation idiom) so these are natural places
+ * to accumulate extra debugging checks.  Note that we can't (yet)
+ * rely on gpio_request() having been called beforehand.
+ */
+
+static int gpio_do_set_config(struct gpio_chip *gc, unsigned int offset,
+			      unsigned long config)
+{
+	if (!gc->set_config)
+		return -ENOTSUPP;
+
+	return gc->set_config(gc, offset, config);
+}
+
+static int gpio_set_config(struct gpio_desc *desc, enum pin_config_param mode)
+{
+	struct gpio_chip *gc = desc->gdev->chip;
+	unsigned long config;
+	unsigned arg;
+
+	switch (mode) {
+	case PIN_CONFIG_BIAS_PULL_DOWN:
+	case PIN_CONFIG_BIAS_PULL_UP:
+		arg = 1;
+		break;
+
+	default:
+		arg = 0;
+	}
+
+	config = PIN_CONF_PACKED(mode, arg);
+	return gpio_do_set_config(gc, gpio_chip_hwgpio(desc), config);
+}
+
+static int gpio_set_bias(struct gpio_desc *desc)
+{
+	int bias = 0;
+	int ret = 0;
+
+	if (test_bit(FLAG_BIAS_DISABLE, &desc->flags))
+		bias = PIN_CONFIG_BIAS_DISABLE;
+	else if (test_bit(FLAG_PULL_UP, &desc->flags))
+		bias = PIN_CONFIG_BIAS_PULL_UP;
+	else if (test_bit(FLAG_PULL_DOWN, &desc->flags))
+		bias = PIN_CONFIG_BIAS_PULL_DOWN;
+
+	if (bias) {
+		ret = gpio_set_config(desc, bias);
+		if (ret != -ENOTSUPP)
+			return ret;
+	}
+	return 0;
+}
+
+/**
+ * gpiod_direction_input - set the GPIO direction to input
+ * @desc:	GPIO to set to input
+ *
+ * Set the direction of the passed GPIO to input, such as gpiod_get_value() can
+ * be called safely on it.
+ *
+ * Return 0 in case of success, else an error code.
+ */
+int gpiod_direction_input(struct gpio_desc *desc)
+{
+	struct gpio_chip	*gc;
+	int			ret = 0;
+
+	VALIDATE_DESC(desc);
+	gc = desc->gdev->chip;
+
+	/*
+	 * It is legal to have no .get() and .direction_input() specified if
+	 * the chip is output-only, but you can't specify .direction_input()
+	 * and not support the .get() operation, that doesn't make sense.
+	 */
+	if (!gc->get && gc->direction_input) {
+		gpiod_warn(desc,
+			   "%s: missing get() but have direction_input()\n",
+			   __func__);
+		return -EIO;
+	}
+
+	/*
+	 * If we have a .direction_input() callback, things are simple,
+	 * just call it. Else we are some input-only chip so try to check the
+	 * direction (if .get_direction() is supported) else we silently
+	 * assume we are in input mode after this.
+	 */
+	if (gc->direction_input) {
+		ret = gc->direction_input(gc, gpio_chip_hwgpio(desc));
+	} else if (gc->get_direction &&
+		  (gc->get_direction(gc, gpio_chip_hwgpio(desc)) != 1)) {
+		gpiod_warn(desc,
+			   "%s: missing direction_input() operation and line is output\n",
+			   __func__);
+		return -EIO;
+	}
+	if (ret == 0) {
+		clear_bit(FLAG_IS_OUT, &desc->flags);
+		ret = gpio_set_bias(desc);
+	}
+
+	trace_gpio_direction(desc_to_gpio(desc), 1, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(gpiod_direction_input);
+
+static int gpiod_direction_output_raw_commit(struct gpio_desc *desc, int value)
+{
+	struct gpio_chip *gc = desc->gdev->chip;
+	int val = !!value;
+	int ret = 0;
+
+	/*
+	 * It's OK not to specify .direction_output() if the gpiochip is
+	 * output-only, but if there is then not even a .set() operation it
+	 * is pretty tricky to drive the output line.
+	 */
+	if (!gc->set && !gc->direction_output) {
+		gpiod_warn(desc,
+			   "%s: missing set() and direction_output() operations\n",
+			   __func__);
+		return -EIO;
+	}
+
+	if (gc->direction_output) {
+		ret = gc->direction_output(gc, gpio_chip_hwgpio(desc), val);
+	} else {
+		/* Check that we are in output mode if we can */
+		if (gc->get_direction &&
+		    gc->get_direction(gc, gpio_chip_hwgpio(desc))) {
+			gpiod_warn(desc,
+				"%s: missing direction_output() operation\n",
+				__func__);
+			return -EIO;
+		}
+		/*
+		 * If we can't actively set the direction, we are some
+		 * output-only chip, so just drive the output as desired.
+		 */
+		gc->set(gc, gpio_chip_hwgpio(desc), val);
+	}
+
+	if (!ret)
+		set_bit(FLAG_IS_OUT, &desc->flags);
+	trace_gpio_value(desc_to_gpio(desc), 0, val);
+	trace_gpio_direction(desc_to_gpio(desc), 0, ret);
+	return ret;
+}
+
+/**
+ * gpiod_direction_output_raw - set the GPIO direction to output
+ * @desc:	GPIO to set to output
+ * @value:	initial output value of the GPIO
+ *
+ * Set the direction of the passed GPIO to output, such as gpiod_set_value() can
+ * be called safely on it. The initial value of the output must be specified
+ * as raw value on the physical line without regard for the ACTIVE_LOW status.
+ *
+ * Return 0 in case of success, else an error code.
+ */
+int gpiod_direction_output_raw(struct gpio_desc *desc, int value)
+{
+	VALIDATE_DESC(desc);
+	return gpiod_direction_output_raw_commit(desc, value);
+}
+EXPORT_SYMBOL_GPL(gpiod_direction_output_raw);
+
+/**
+ * gpiod_direction_output - set the GPIO direction to output
+ * @desc:	GPIO to set to output
+ * @value:	initial output value of the GPIO
+ *
+ * Set the direction of the passed GPIO to output, such as gpiod_set_value() can
+ * be called safely on it. The initial value of the output must be specified
+ * as the logical value of the GPIO, i.e. taking its ACTIVE_LOW status into
+ * account.
+ *
+ * Return 0 in case of success, else an error code.
+ */
+int gpiod_direction_output(struct gpio_desc *desc, int value)
+{
+	int ret;
+
+	VALIDATE_DESC(desc);
+	if (test_bit(FLAG_ACTIVE_LOW, &desc->flags))
+		value = !value;
+	else
+		value = !!value;
+
+	/* GPIOs used for enabled IRQs shall not be set as output */
+	if (test_bit(FLAG_USED_AS_IRQ, &desc->flags) &&
+	    test_bit(FLAG_IRQ_IS_ENABLED, &desc->flags)) {
+		gpiod_err(desc,
+			  "%s: tried to set a GPIO tied to an IRQ as output\n",
+			  __func__);
+		return -EIO;
+	}
+
+	if (test_bit(FLAG_OPEN_DRAIN, &desc->flags)) {
+		/* First see if we can enable open drain in hardware */
+		ret = gpio_set_config(desc, PIN_CONFIG_DRIVE_OPEN_DRAIN);
+		if (!ret)
+			goto set_output_value;
+		/* Emulate open drain by not actively driving the line high */
+		if (value) {
+			ret = gpiod_direction_input(desc);
+			goto set_output_flag;
+		}
+	} else if (test_bit(FLAG_OPEN_SOURCE, &desc->flags)) {
+		ret = gpio_set_config(desc, PIN_CONFIG_DRIVE_OPEN_SOURCE);
+		if (!ret)
+			goto set_output_value;
+		/* Emulate open source by not actively driving the line low */
+		if (!value) {
+			ret = gpiod_direction_input(desc);
+			goto set_output_flag;
+		}
+	} else {
+		gpio_set_config(desc, PIN_CONFIG_DRIVE_PUSH_PULL);
+	}
+
+set_output_value:
+	ret = gpio_set_bias(desc);
+	if (ret)
+		return ret;
+	return gpiod_direction_output_raw_commit(desc, value);
+
+set_output_flag:
+	/*
+	 * When emulating open-source or open-drain functionalities by not
+	 * actively driving the line (setting mode to input) we still need to
+	 * set the IS_OUT flag or otherwise we won't be able to set the line
+	 * value anymore.
+	 */
+	if (ret == 0)
+		set_bit(FLAG_IS_OUT, &desc->flags);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(gpiod_direction_output);
+
+/**
+ * gpiod_set_config - sets @config for a GPIO
+ * @desc: descriptor of the GPIO for which to set the configuration
+ * @config: Same packed config format as generic pinconf
+ *
+ * Returns:
+ * 0 on success, %-ENOTSUPP if the controller doesn't support setting the
+ * configuration.
+ */
+int gpiod_set_config(struct gpio_desc *desc, unsigned long config)
+{
+	struct gpio_chip *gc;
+
+	VALIDATE_DESC(desc);
+	gc = desc->gdev->chip;
+
+	return gpio_do_set_config(gc, gpio_chip_hwgpio(desc), config);
+}
+EXPORT_SYMBOL_GPL(gpiod_set_config);
+
+/**
+ * gpiod_set_debounce - sets @debounce time for a GPIO
+ * @desc: descriptor of the GPIO for which to set debounce time
+ * @debounce: debounce time in microseconds
+ *
+ * Returns:
+ * 0 on success, %-ENOTSUPP if the controller doesn't support setting the
+ * debounce time.
+ */
+int gpiod_set_debounce(struct gpio_desc *desc, unsigned debounce)
+{
+	unsigned long config;
+
+	config = pinconf_to_config_packed(PIN_CONFIG_INPUT_DEBOUNCE, debounce);
+	return gpiod_set_config(desc, config);
+}
+EXPORT_SYMBOL_GPL(gpiod_set_debounce);
+
+/**
+ * gpiod_set_transitory - Lose or retain GPIO state on suspend or reset
+ * @desc: descriptor of the GPIO for which to configure persistence
+ * @transitory: True to lose state on suspend or reset, false for persistence
+ *
+ * Returns:
+ * 0 on success, otherwise a negative error code.
+ */
+int gpiod_set_transitory(struct gpio_desc *desc, bool transitory)
+{
+	struct gpio_chip *gc;
+	unsigned long packed;
+	int gpio;
+	int rc;
+
+	VALIDATE_DESC(desc);
+	/*
+	 * Handle FLAG_TRANSITORY first, enabling queries to gpiolib for
+	 * persistence state.
+	 */
+	assign_bit(FLAG_TRANSITORY, &desc->flags, transitory);
+
+	/* If the driver supports it, set the persistence state now */
+	gc = desc->gdev->chip;
+	if (!gc->set_config)
+		return 0;
+
+	packed = pinconf_to_config_packed(PIN_CONFIG_PERSIST_STATE,
+					  !transitory);
+	gpio = gpio_chip_hwgpio(desc);
+	rc = gpio_do_set_config(gc, gpio, packed);
+	if (rc == -ENOTSUPP) {
+		dev_dbg(&desc->gdev->dev, "Persistence not supported for GPIO %d\n",
+				gpio);
+		return 0;
+	}
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(gpiod_set_transitory);
+
+/**
+ * gpiod_is_active_low - test whether a GPIO is active-low or not
+ * @desc: the gpio descriptor to test
+ *
+ * Returns 1 if the GPIO is active-low, 0 otherwise.
+ */
+int gpiod_is_active_low(const struct gpio_desc *desc)
+{
+	VALIDATE_DESC(desc);
+	return test_bit(FLAG_ACTIVE_LOW, &desc->flags);
+}
+EXPORT_SYMBOL_GPL(gpiod_is_active_low);
+
+/**
+ * gpiod_toggle_active_low - toggle whether a GPIO is active-low or not
+ * @desc: the gpio descriptor to change
+ */
+void gpiod_toggle_active_low(struct gpio_desc *desc)
+{
+	VALIDATE_DESC_VOID(desc);
+	change_bit(FLAG_ACTIVE_LOW, &desc->flags);
+}
+EXPORT_SYMBOL_GPL(gpiod_toggle_active_low);
+
+/* I/O calls are only valid after configuration completed; the relevant
+ * "is this a valid GPIO" error checks should already have been done.
+ *
+ * "Get" operations are often inlinable as reading a pin value register,
+ * and masking the relevant bit in that register.
+ *
+ * When "set" operations are inlinable, they involve writing that mask to
+ * one register to set a low value, or a different register to set it high.
+ * Otherwise locking is needed, so there may be little value to inlining.
+ *
+ *------------------------------------------------------------------------
+ *
+ * IMPORTANT!!!  The hot paths -- get/set value -- assume that callers
+ * have requested the GPIO.  That can include implicit requesting by
+ * a direction setting call.  Marking a gpio as requested locks its chip
+ * in memory, guaranteeing that these table lookups need no more locking
+ * and that gpiochip_remove() will fail.
+ *
+ * REVISIT when debugging, consider adding some instrumentation to ensure
+ * that the GPIO was actually requested.
+ */
+
+static int gpiod_get_raw_value_commit(const struct gpio_desc *desc)
+{
+	struct gpio_chip	*gc;
+	int offset;
+	int value;
+
+	gc = desc->gdev->chip;
+	offset = gpio_chip_hwgpio(desc);
+	value = gc->get ? gc->get(gc, offset) : -EIO;
+	value = value < 0 ? value : !!value;
+	trace_gpio_value(desc_to_gpio(desc), 1, value);
+	return value;
+}
+
+static int gpio_chip_get_multiple(struct gpio_chip *gc,
+				  unsigned long *mask, unsigned long *bits)
+{
+	if (gc->get_multiple)
+		return gc->get_multiple(gc, mask, bits);
+	if (gc->get) {
+		int i, value;
+
+		for_each_set_bit(i, mask, gc->ngpio) {
+			value = gc->get(gc, i);
+			if (value < 0)
+				return value;
+			__assign_bit(i, bits, value);
+		}
+		return 0;
+	}
+	return -EIO;
+}
+
+int gpiod_get_array_value_complex(bool raw, bool can_sleep,
+				  unsigned int array_size,
+				  struct gpio_desc **desc_array,
+				  struct gpio_array *array_info,
+				  unsigned long *value_bitmap)
+{
+	int ret, i = 0;
+
+	/*
+	 * Validate array_info against desc_array and its size.
+	 * It should immediately follow desc_array if both
+	 * have been obtained from the same gpiod_get_array() call.
+	 */
+	if (array_info && array_info->desc == desc_array &&
+	    array_size <= array_info->size &&
+	    (void *)array_info == desc_array + array_info->size) {
+		if (!can_sleep)
+			WARN_ON(array_info->chip->can_sleep);
+
+		ret = gpio_chip_get_multiple(array_info->chip,
+					     array_info->get_mask,
+					     value_bitmap);
+		if (ret)
+			return ret;
+
+		if (!raw && !bitmap_empty(array_info->invert_mask, array_size))
+			bitmap_xor(value_bitmap, value_bitmap,
+				   array_info->invert_mask, array_size);
+
+		i = find_first_zero_bit(array_info->get_mask, array_size);
+		if (i == array_size)
+			return 0;
+	} else {
+		array_info = NULL;
+	}
+
+	while (i < array_size) {
+		struct gpio_chip *gc = desc_array[i]->gdev->chip;
+		unsigned long fastpath[2 * BITS_TO_LONGS(FASTPATH_NGPIO)];
+		unsigned long *mask, *bits;
+		int first, j, ret;
+
+		if (likely(gc->ngpio <= FASTPATH_NGPIO)) {
+			mask = fastpath;
+		} else {
+			mask = kmalloc_array(2 * BITS_TO_LONGS(gc->ngpio),
+					   sizeof(*mask),
+					   can_sleep ? GFP_KERNEL : GFP_ATOMIC);
+			if (!mask)
+				return -ENOMEM;
+		}
+
+		bits = mask + BITS_TO_LONGS(gc->ngpio);
+		bitmap_zero(mask, gc->ngpio);
+
+		if (!can_sleep)
+			WARN_ON(gc->can_sleep);
+
+		/* collect all inputs belonging to the same chip */
+		first = i;
+		do {
+			const struct gpio_desc *desc = desc_array[i];
+			int hwgpio = gpio_chip_hwgpio(desc);
+
+			__set_bit(hwgpio, mask);
+			i++;
+
+			if (array_info)
+				i = find_next_zero_bit(array_info->get_mask,
+						       array_size, i);
+		} while ((i < array_size) &&
+			 (desc_array[i]->gdev->chip == gc));
+
+		ret = gpio_chip_get_multiple(gc, mask, bits);
+		if (ret) {
+			if (mask != fastpath)
+				kfree(mask);
+			return ret;
+		}
+
+		for (j = first; j < i; ) {
+			const struct gpio_desc *desc = desc_array[j];
+			int hwgpio = gpio_chip_hwgpio(desc);
+			int value = test_bit(hwgpio, bits);
+
+			if (!raw && test_bit(FLAG_ACTIVE_LOW, &desc->flags))
+				value = !value;
+			__assign_bit(j, value_bitmap, value);
+			trace_gpio_value(desc_to_gpio(desc), 1, value);
+			j++;
+
+			if (array_info)
+				j = find_next_zero_bit(array_info->get_mask, i,
+						       j);
+		}
+
+		if (mask != fastpath)
+			kfree(mask);
+	}
+	return 0;
+}
+
+/**
+ * gpiod_get_raw_value() - return a gpio's raw value
+ * @desc: gpio whose value will be returned
+ *
+ * Return the GPIO's raw value, i.e. the value of the physical line disregarding
+ * its ACTIVE_LOW status, or negative errno on failure.
+ *
+ * This function can be called from contexts where we cannot sleep, and will
+ * complain if the GPIO chip functions potentially sleep.
+ */
+int gpiod_get_raw_value(const struct gpio_desc *desc)
+{
+	VALIDATE_DESC(desc);
+	/* Should be using gpiod_get_raw_value_cansleep() */
+	WARN_ON(desc->gdev->chip->can_sleep);
+	return gpiod_get_raw_value_commit(desc);
+}
+EXPORT_SYMBOL_GPL(gpiod_get_raw_value);
+
+/**
+ * gpiod_get_value() - return a gpio's value
+ * @desc: gpio whose value will be returned
+ *
+ * Return the GPIO's logical value, i.e. taking the ACTIVE_LOW status into
+ * account, or negative errno on failure.
+ *
+ * This function can be called from contexts where we cannot sleep, and will
+ * complain if the GPIO chip functions potentially sleep.
+ */
+int gpiod_get_value(const struct gpio_desc *desc)
+{
+	int value;
+
+	VALIDATE_DESC(desc);
+	/* Should be using gpiod_get_value_cansleep() */
+	WARN_ON(desc->gdev->chip->can_sleep);
+
+	value = gpiod_get_raw_value_commit(desc);
+	if (value < 0)
+		return value;
+
+	if (test_bit(FLAG_ACTIVE_LOW, &desc->flags))
+		value = !value;
+
+	return value;
+}
+EXPORT_SYMBOL_GPL(gpiod_get_value);
+
+/**
+ * gpiod_get_raw_array_value() - read raw values from an array of GPIOs
+ * @array_size: number of elements in the descriptor array / value bitmap
+ * @desc_array: array of GPIO descriptors whose values will be read
+ * @array_info: information on applicability of fast bitmap processing path
+ * @value_bitmap: bitmap to store the read values
+ *
+ * Read the raw values of the GPIOs, i.e. the values of the physical lines
+ * without regard for their ACTIVE_LOW status.  Return 0 in case of success,
+ * else an error code.
+ *
+ * This function can be called from contexts where we cannot sleep,
+ * and it will complain if the GPIO chip functions potentially sleep.
+ */
+int gpiod_get_raw_array_value(unsigned int array_size,
+			      struct gpio_desc **desc_array,
+			      struct gpio_array *array_info,
+			      unsigned long *value_bitmap)
+{
+	if (!desc_array)
+		return -EINVAL;
+	return gpiod_get_array_value_complex(true, false, array_size,
+					     desc_array, array_info,
+					     value_bitmap);
+}
+EXPORT_SYMBOL_GPL(gpiod_get_raw_array_value);
+
+/**
+ * gpiod_get_array_value() - read values from an array of GPIOs
+ * @array_size: number of elements in the descriptor array / value bitmap
+ * @desc_array: array of GPIO descriptors whose values will be read
+ * @array_info: information on applicability of fast bitmap processing path
+ * @value_bitmap: bitmap to store the read values
+ *
+ * Read the logical values of the GPIOs, i.e. taking their ACTIVE_LOW status
+ * into account.  Return 0 in case of success, else an error code.
+ *
+ * This function can be called from contexts where we cannot sleep,
+ * and it will complain if the GPIO chip functions potentially sleep.
+ */
+int gpiod_get_array_value(unsigned int array_size,
+			  struct gpio_desc **desc_array,
+			  struct gpio_array *array_info,
+			  unsigned long *value_bitmap)
+{
+	if (!desc_array)
+		return -EINVAL;
+	return gpiod_get_array_value_complex(false, false, array_size,
+					     desc_array, array_info,
+					     value_bitmap);
+}
+EXPORT_SYMBOL_GPL(gpiod_get_array_value);
+
+/*
+ *  gpio_set_open_drain_value_commit() - Set the open drain gpio's value.
+ * @desc: gpio descriptor whose state need to be set.
+ * @value: Non-zero for setting it HIGH otherwise it will set to LOW.
+ */
+static void gpio_set_open_drain_value_commit(struct gpio_desc *desc, bool value)
+{
+	int ret = 0;
+	struct gpio_chip *gc = desc->gdev->chip;
+	int offset = gpio_chip_hwgpio(desc);
+
+	if (value) {
+		ret = gc->direction_input(gc, offset);
+	} else {
+		ret = gc->direction_output(gc, offset, 0);
+		if (!ret)
+			set_bit(FLAG_IS_OUT, &desc->flags);
+	}
+	trace_gpio_direction(desc_to_gpio(desc), value, ret);
+	if (ret < 0)
+		gpiod_err(desc,
+			  "%s: Error in set_value for open drain err %d\n",
+			  __func__, ret);
+}
+
+/*
+ *  _gpio_set_open_source_value() - Set the open source gpio's value.
+ * @desc: gpio descriptor whose state need to be set.
+ * @value: Non-zero for setting it HIGH otherwise it will set to LOW.
+ */
+static void gpio_set_open_source_value_commit(struct gpio_desc *desc, bool value)
+{
+	int ret = 0;
+	struct gpio_chip *gc = desc->gdev->chip;
+	int offset = gpio_chip_hwgpio(desc);
+
+	if (value) {
+		ret = gc->direction_output(gc, offset, 1);
+		if (!ret)
+			set_bit(FLAG_IS_OUT, &desc->flags);
+	} else {
+		ret = gc->direction_input(gc, offset);
+	}
+	trace_gpio_direction(desc_to_gpio(desc), !value, ret);
+	if (ret < 0)
+		gpiod_err(desc,
+			  "%s: Error in set_value for open source err %d\n",
+			  __func__, ret);
+}
+
+static void gpiod_set_raw_value_commit(struct gpio_desc *desc, bool value)
+{
+	struct gpio_chip	*gc;
+
+	gc = desc->gdev->chip;
+	trace_gpio_value(desc_to_gpio(desc), 0, value);
+	gc->set(gc, gpio_chip_hwgpio(desc), value);
+}
+
+/*
+ * set multiple outputs on the same chip;
+ * use the chip's set_multiple function if available;
+ * otherwise set the outputs sequentially;
+ * @chip: the GPIO chip we operate on
+ * @mask: bit mask array; one bit per output; BITS_PER_LONG bits per word
+ *        defines which outputs are to be changed
+ * @bits: bit value array; one bit per output; BITS_PER_LONG bits per word
+ *        defines the values the outputs specified by mask are to be set to
+ */
+static void gpio_chip_set_multiple(struct gpio_chip *gc,
+				   unsigned long *mask, unsigned long *bits)
+{
+	if (gc->set_multiple) {
+		gc->set_multiple(gc, mask, bits);
+	} else {
+		unsigned int i;
+
+		/* set outputs if the corresponding mask bit is set */
+		for_each_set_bit(i, mask, gc->ngpio)
+			gc->set(gc, i, test_bit(i, bits));
+	}
+}
+
+int gpiod_set_array_value_complex(bool raw, bool can_sleep,
+				  unsigned int array_size,
+				  struct gpio_desc **desc_array,
+				  struct gpio_array *array_info,
+				  unsigned long *value_bitmap)
+{
+	int i = 0;
+
+	/*
+	 * Validate array_info against desc_array and its size.
+	 * It should immediately follow desc_array if both
+	 * have been obtained from the same gpiod_get_array() call.
+	 */
+	if (array_info && array_info->desc == desc_array &&
+	    array_size <= array_info->size &&
+	    (void *)array_info == desc_array + array_info->size) {
+		if (!can_sleep)
+			WARN_ON(array_info->chip->can_sleep);
+
+		if (!raw && !bitmap_empty(array_info->invert_mask, array_size))
+			bitmap_xor(value_bitmap, value_bitmap,
+				   array_info->invert_mask, array_size);
+
+		gpio_chip_set_multiple(array_info->chip, array_info->set_mask,
+				       value_bitmap);
+
+		i = find_first_zero_bit(array_info->set_mask, array_size);
+		if (i == array_size)
+			return 0;
+	} else {
+		array_info = NULL;
+	}
+
+	while (i < array_size) {
+		struct gpio_chip *gc = desc_array[i]->gdev->chip;
+		unsigned long fastpath[2 * BITS_TO_LONGS(FASTPATH_NGPIO)];
+		unsigned long *mask, *bits;
+		int count = 0;
+
+		if (likely(gc->ngpio <= FASTPATH_NGPIO)) {
+			mask = fastpath;
+		} else {
+			mask = kmalloc_array(2 * BITS_TO_LONGS(gc->ngpio),
+					   sizeof(*mask),
+					   can_sleep ? GFP_KERNEL : GFP_ATOMIC);
+			if (!mask)
+				return -ENOMEM;
+		}
+
+		bits = mask + BITS_TO_LONGS(gc->ngpio);
+		bitmap_zero(mask, gc->ngpio);
+
+		if (!can_sleep)
+			WARN_ON(gc->can_sleep);
+
+		do {
+			struct gpio_desc *desc = desc_array[i];
+			int hwgpio = gpio_chip_hwgpio(desc);
+			int value = test_bit(i, value_bitmap);
+
+			/*
+			 * Pins applicable for fast input but not for
+			 * fast output processing may have been already
+			 * inverted inside the fast path, skip them.
+			 */
+			if (!raw && !(array_info &&
+			    test_bit(i, array_info->invert_mask)) &&
+			    test_bit(FLAG_ACTIVE_LOW, &desc->flags))
+				value = !value;
+			trace_gpio_value(desc_to_gpio(desc), 0, value);
+			/*
+			 * collect all normal outputs belonging to the same chip
+			 * open drain and open source outputs are set individually
+			 */
+			if (test_bit(FLAG_OPEN_DRAIN, &desc->flags) && !raw) {
+				gpio_set_open_drain_value_commit(desc, value);
+			} else if (test_bit(FLAG_OPEN_SOURCE, &desc->flags) && !raw) {
+				gpio_set_open_source_value_commit(desc, value);
+			} else {
+				__set_bit(hwgpio, mask);
+				__assign_bit(hwgpio, bits, value);
+				count++;
+			}
+			i++;
+
+			if (array_info)
+				i = find_next_zero_bit(array_info->set_mask,
+						       array_size, i);
+		} while ((i < array_size) &&
+			 (desc_array[i]->gdev->chip == gc));
+		/* push collected bits to outputs */
+		if (count != 0)
+			gpio_chip_set_multiple(gc, mask, bits);
+
+		if (mask != fastpath)
+			kfree(mask);
+	}
+	return 0;
+}
+
+/**
+ * gpiod_set_raw_value() - assign a gpio's raw value
+ * @desc: gpio whose value will be assigned
+ * @value: value to assign
+ *
+ * Set the raw value of the GPIO, i.e. the value of its physical line without
+ * regard for its ACTIVE_LOW status.
+ *
+ * This function can be called from contexts where we cannot sleep, and will
+ * complain if the GPIO chip functions potentially sleep.
+ */
+void gpiod_set_raw_value(struct gpio_desc *desc, int value)
+{
+	VALIDATE_DESC_VOID(desc);
+	/* Should be using gpiod_set_raw_value_cansleep() */
+	WARN_ON(desc->gdev->chip->can_sleep);
+	gpiod_set_raw_value_commit(desc, value);
+}
+EXPORT_SYMBOL_GPL(gpiod_set_raw_value);
+
+/**
+ * gpiod_set_value_nocheck() - set a GPIO line value without checking
+ * @desc: the descriptor to set the value on
+ * @value: value to set
+ *
+ * This sets the value of a GPIO line backing a descriptor, applying
+ * different semantic quirks like active low and open drain/source
+ * handling.
+ */
+static void gpiod_set_value_nocheck(struct gpio_desc *desc, int value)
+{
+	if (test_bit(FLAG_ACTIVE_LOW, &desc->flags))
+		value = !value;
+	if (test_bit(FLAG_OPEN_DRAIN, &desc->flags))
+		gpio_set_open_drain_value_commit(desc, value);
+	else if (test_bit(FLAG_OPEN_SOURCE, &desc->flags))
+		gpio_set_open_source_value_commit(desc, value);
+	else
+		gpiod_set_raw_value_commit(desc, value);
+}
+
+/**
+ * gpiod_set_value() - assign a gpio's value
+ * @desc: gpio whose value will be assigned
+ * @value: value to assign
+ *
+ * Set the logical value of the GPIO, i.e. taking its ACTIVE_LOW,
+ * OPEN_DRAIN and OPEN_SOURCE flags into account.
+ *
+ * This function can be called from contexts where we cannot sleep, and will
+ * complain if the GPIO chip functions potentially sleep.
+ */
+void gpiod_set_value(struct gpio_desc *desc, int value)
+{
+	VALIDATE_DESC_VOID(desc);
+	/* Should be using gpiod_set_value_cansleep() */
+	WARN_ON(desc->gdev->chip->can_sleep);
+	gpiod_set_value_nocheck(desc, value);
+}
+EXPORT_SYMBOL_GPL(gpiod_set_value);
+
+/**
+ * gpiod_set_raw_array_value() - assign values to an array of GPIOs
+ * @array_size: number of elements in the descriptor array / value bitmap
+ * @desc_array: array of GPIO descriptors whose values will be assigned
+ * @array_info: information on applicability of fast bitmap processing path
+ * @value_bitmap: bitmap of values to assign
+ *
+ * Set the raw values of the GPIOs, i.e. the values of the physical lines
+ * without regard for their ACTIVE_LOW status.
+ *
+ * This function can be called from contexts where we cannot sleep, and will
+ * complain if the GPIO chip functions potentially sleep.
+ */
+int gpiod_set_raw_array_value(unsigned int array_size,
+			      struct gpio_desc **desc_array,
+			      struct gpio_array *array_info,
+			      unsigned long *value_bitmap)
+{
+	if (!desc_array)
+		return -EINVAL;
+	return gpiod_set_array_value_complex(true, false, array_size,
+					desc_array, array_info, value_bitmap);
+}
+EXPORT_SYMBOL_GPL(gpiod_set_raw_array_value);
+
+/**
+ * gpiod_set_array_value() - assign values to an array of GPIOs
+ * @array_size: number of elements in the descriptor array / value bitmap
+ * @desc_array: array of GPIO descriptors whose values will be assigned
+ * @array_info: information on applicability of fast bitmap processing path
+ * @value_bitmap: bitmap of values to assign
+ *
+ * Set the logical values of the GPIOs, i.e. taking their ACTIVE_LOW status
+ * into account.
+ *
+ * This function can be called from contexts where we cannot sleep, and will
+ * complain if the GPIO chip functions potentially sleep.
+ */
+int gpiod_set_array_value(unsigned int array_size,
+			  struct gpio_desc **desc_array,
+			  struct gpio_array *array_info,
+			  unsigned long *value_bitmap)
+{
+	if (!desc_array)
+		return -EINVAL;
+	return gpiod_set_array_value_complex(false, false, array_size,
+					     desc_array, array_info,
+					     value_bitmap);
+}
+EXPORT_SYMBOL_GPL(gpiod_set_array_value);
+
+/**
+ * gpiod_cansleep() - report whether gpio value access may sleep
+ * @desc: gpio to check
+ *
+ */
+int gpiod_cansleep(const struct gpio_desc *desc)
+{
+	VALIDATE_DESC(desc);
+	return desc->gdev->chip->can_sleep;
+}
+EXPORT_SYMBOL_GPL(gpiod_cansleep);
+
+/**
+ * gpiod_set_consumer_name() - set the consumer name for the descriptor
+ * @desc: gpio to set the consumer name on
+ * @name: the new consumer name
+ */
+int gpiod_set_consumer_name(struct gpio_desc *desc, const char *name)
+{
+	VALIDATE_DESC(desc);
+	if (name) {
+		name = kstrdup_const(name, GFP_KERNEL);
+		if (!name)
+			return -ENOMEM;
+	}
+
+	kfree_const(desc->label);
+	desc_set_label(desc, name);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(gpiod_set_consumer_name);
+
+/**
+ * gpiod_to_irq() - return the IRQ corresponding to a GPIO
+ * @desc: gpio whose IRQ will be returned (already requested)
+ *
+ * Return the IRQ corresponding to the passed GPIO, or an error code in case of
+ * error.
+ */
+int gpiod_to_irq(const struct gpio_desc *desc)
+{
+	struct gpio_chip *gc;
+	int offset;
+
+	/*
+	 * Cannot VALIDATE_DESC() here as gpiod_to_irq() consumer semantics
+	 * requires this function to not return zero on an invalid descriptor
+	 * but rather a negative error number.
+	 */
+	if (!desc || IS_ERR(desc) || !desc->gdev || !desc->gdev->chip)
+		return -EINVAL;
+
+	gc = desc->gdev->chip;
+	offset = gpio_chip_hwgpio(desc);
+	if (gc->to_irq) {
+		int retirq = gc->to_irq(gc, offset);
+
+		/* Zero means NO_IRQ */
+		if (!retirq)
+			return -ENXIO;
+
+		return retirq;
+	}
+#ifdef CONFIG_GPIOLIB_IRQCHIP
+	if (gc->irq.chip) {
+		/*
+		 * Avoid race condition with other code, which tries to lookup
+		 * an IRQ before the irqchip has been properly registered,
+		 * i.e. while gpiochip is still being brought up.
+		 */
+		return -EPROBE_DEFER;
+	}
+#endif
+	return -ENXIO;
+}
+EXPORT_SYMBOL_GPL(gpiod_to_irq);
+
+/**
+ * gpiochip_lock_as_irq() - lock a GPIO to be used as IRQ
+ * @gc: the chip the GPIO to lock belongs to
+ * @offset: the offset of the GPIO to lock as IRQ
+ *
+ * This is used directly by GPIO drivers that want to lock down
+ * a certain GPIO line to be used for IRQs.
+ */
+int gpiochip_lock_as_irq(struct gpio_chip *gc, unsigned int offset)
+{
+	struct gpio_desc *desc;
+
+	desc = gpiochip_get_desc(gc, offset);
+	if (IS_ERR(desc))
+		return PTR_ERR(desc);
+
+	/*
+	 * If it's fast: flush the direction setting if something changed
+	 * behind our back
+	 */
+	if (!gc->can_sleep && gc->get_direction) {
+		int dir = gpiod_get_direction(desc);
+
+		if (dir < 0) {
+			chip_err(gc, "%s: cannot get GPIO direction\n",
+				 __func__);
+			return dir;
+		}
+	}
+
+	/* To be valid for IRQ the line needs to be input or open drain */
+	if (test_bit(FLAG_IS_OUT, &desc->flags) &&
+	    !test_bit(FLAG_OPEN_DRAIN, &desc->flags)) {
+		chip_err(gc,
+			 "%s: tried to flag a GPIO set as output for IRQ\n",
+			 __func__);
+		return -EIO;
+	}
+
+	set_bit(FLAG_USED_AS_IRQ, &desc->flags);
+	set_bit(FLAG_IRQ_IS_ENABLED, &desc->flags);
+
+	/*
+	 * If the consumer has not set up a label (such as when the
+	 * IRQ is referenced from .to_irq()) we set up a label here
+	 * so it is clear this is used as an interrupt.
+	 */
+	if (!desc->label)
+		desc_set_label(desc, "interrupt");
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(gpiochip_lock_as_irq);
+
+/**
+ * gpiochip_unlock_as_irq() - unlock a GPIO used as IRQ
+ * @gc: the chip the GPIO to lock belongs to
+ * @offset: the offset of the GPIO to lock as IRQ
+ *
+ * This is used directly by GPIO drivers that want to indicate
+ * that a certain GPIO is no longer used exclusively for IRQ.
+ */
+void gpiochip_unlock_as_irq(struct gpio_chip *gc, unsigned int offset)
+{
+	struct gpio_desc *desc;
+
+	desc = gpiochip_get_desc(gc, offset);
+	if (IS_ERR(desc))
+		return;
+
+	clear_bit(FLAG_USED_AS_IRQ, &desc->flags);
+	clear_bit(FLAG_IRQ_IS_ENABLED, &desc->flags);
+
+	/* If we only had this marking, erase it */
+	if (desc->label && !strcmp(desc->label, "interrupt"))
+		desc_set_label(desc, NULL);
+}
+EXPORT_SYMBOL_GPL(gpiochip_unlock_as_irq);
+
+void gpiochip_disable_irq(struct gpio_chip *gc, unsigned int offset)
+{
+	struct gpio_desc *desc = gpiochip_get_desc(gc, offset);
+
+	if (!IS_ERR(desc) &&
+	    !WARN_ON(!test_bit(FLAG_USED_AS_IRQ, &desc->flags)))
+		clear_bit(FLAG_IRQ_IS_ENABLED, &desc->flags);
+}
+EXPORT_SYMBOL_GPL(gpiochip_disable_irq);
+
+void gpiochip_enable_irq(struct gpio_chip *gc, unsigned int offset)
+{
+	struct gpio_desc *desc = gpiochip_get_desc(gc, offset);
+
+	if (!IS_ERR(desc) &&
+	    !WARN_ON(!test_bit(FLAG_USED_AS_IRQ, &desc->flags))) {
+		/*
+		 * We must not be output when using IRQ UNLESS we are
+		 * open drain.
+		 */
+		WARN_ON(test_bit(FLAG_IS_OUT, &desc->flags) &&
+			!test_bit(FLAG_OPEN_DRAIN, &desc->flags));
+		set_bit(FLAG_IRQ_IS_ENABLED, &desc->flags);
+	}
+}
+EXPORT_SYMBOL_GPL(gpiochip_enable_irq);
+
+bool gpiochip_line_is_irq(struct gpio_chip *gc, unsigned int offset)
+{
+	if (offset >= gc->ngpio)
+		return false;
+
+	return test_bit(FLAG_USED_AS_IRQ, &gc->gpiodev->descs[offset].flags);
+}
+EXPORT_SYMBOL_GPL(gpiochip_line_is_irq);
+
+int gpiochip_reqres_irq(struct gpio_chip *gc, unsigned int offset)
+{
+	int ret;
+
+	if (!try_module_get(gc->gpiodev->owner))
+		return -ENODEV;
+
+	ret = gpiochip_lock_as_irq(gc, offset);
+	if (ret) {
+		chip_err(gc, "unable to lock HW IRQ %u for IRQ\n", offset);
+		module_put(gc->gpiodev->owner);
+		return ret;
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(gpiochip_reqres_irq);
+
+void gpiochip_relres_irq(struct gpio_chip *gc, unsigned int offset)
+{
+	gpiochip_unlock_as_irq(gc, offset);
+	module_put(gc->gpiodev->owner);
+}
+EXPORT_SYMBOL_GPL(gpiochip_relres_irq);
+
+bool gpiochip_line_is_open_drain(struct gpio_chip *gc, unsigned int offset)
+{
+	if (offset >= gc->ngpio)
+		return false;
+
+	return test_bit(FLAG_OPEN_DRAIN, &gc->gpiodev->descs[offset].flags);
+}
+EXPORT_SYMBOL_GPL(gpiochip_line_is_open_drain);
+
+bool gpiochip_line_is_open_source(struct gpio_chip *gc, unsigned int offset)
+{
+	if (offset >= gc->ngpio)
+		return false;
+
+	return test_bit(FLAG_OPEN_SOURCE, &gc->gpiodev->descs[offset].flags);
+}
+EXPORT_SYMBOL_GPL(gpiochip_line_is_open_source);
+
+bool gpiochip_line_is_persistent(struct gpio_chip *gc, unsigned int offset)
+{
+	if (offset >= gc->ngpio)
+		return false;
+
+	return !test_bit(FLAG_TRANSITORY, &gc->gpiodev->descs[offset].flags);
+}
+EXPORT_SYMBOL_GPL(gpiochip_line_is_persistent);
+
+/**
+ * gpiod_get_raw_value_cansleep() - return a gpio's raw value
+ * @desc: gpio whose value will be returned
+ *
+ * Return the GPIO's raw value, i.e. the value of the physical line disregarding
+ * its ACTIVE_LOW status, or negative errno on failure.
+ *
+ * This function is to be called from contexts that can sleep.
+ */
+int gpiod_get_raw_value_cansleep(const struct gpio_desc *desc)
+{
+	might_sleep_if(extra_checks);
+	VALIDATE_DESC(desc);
+	return gpiod_get_raw_value_commit(desc);
+}
+EXPORT_SYMBOL_GPL(gpiod_get_raw_value_cansleep);
+
+/**
+ * gpiod_get_value_cansleep() - return a gpio's value
+ * @desc: gpio whose value will be returned
+ *
+ * Return the GPIO's logical value, i.e. taking the ACTIVE_LOW status into
+ * account, or negative errno on failure.
+ *
+ * This function is to be called from contexts that can sleep.
+ */
+int gpiod_get_value_cansleep(const struct gpio_desc *desc)
+{
+	int value;
+
+	might_sleep_if(extra_checks);
+	VALIDATE_DESC(desc);
+	value = gpiod_get_raw_value_commit(desc);
+	if (value < 0)
+		return value;
+
+	if (test_bit(FLAG_ACTIVE_LOW, &desc->flags))
+		value = !value;
+
+	return value;
+}
+EXPORT_SYMBOL_GPL(gpiod_get_value_cansleep);
+
+/**
+ * gpiod_get_raw_array_value_cansleep() - read raw values from an array of GPIOs
+ * @array_size: number of elements in the descriptor array / value bitmap
+ * @desc_array: array of GPIO descriptors whose values will be read
+ * @array_info: information on applicability of fast bitmap processing path
+ * @value_bitmap: bitmap to store the read values
+ *
+ * Read the raw values of the GPIOs, i.e. the values of the physical lines
+ * without regard for their ACTIVE_LOW status.  Return 0 in case of success,
+ * else an error code.
+ *
+ * This function is to be called from contexts that can sleep.
+ */
+int gpiod_get_raw_array_value_cansleep(unsigned int array_size,
+				       struct gpio_desc **desc_array,
+				       struct gpio_array *array_info,
+				       unsigned long *value_bitmap)
+{
+	might_sleep_if(extra_checks);
+	if (!desc_array)
+		return -EINVAL;
+	return gpiod_get_array_value_complex(true, true, array_size,
+					     desc_array, array_info,
+					     value_bitmap);
+}
+EXPORT_SYMBOL_GPL(gpiod_get_raw_array_value_cansleep);
+
+/**
+ * gpiod_get_array_value_cansleep() - read values from an array of GPIOs
+ * @array_size: number of elements in the descriptor array / value bitmap
+ * @desc_array: array of GPIO descriptors whose values will be read
+ * @array_info: information on applicability of fast bitmap processing path
+ * @value_bitmap: bitmap to store the read values
+ *
+ * Read the logical values of the GPIOs, i.e. taking their ACTIVE_LOW status
+ * into account.  Return 0 in case of success, else an error code.
+ *
+ * This function is to be called from contexts that can sleep.
+ */
+int gpiod_get_array_value_cansleep(unsigned int array_size,
+				   struct gpio_desc **desc_array,
+				   struct gpio_array *array_info,
+				   unsigned long *value_bitmap)
+{
+	might_sleep_if(extra_checks);
+	if (!desc_array)
+		return -EINVAL;
+	return gpiod_get_array_value_complex(false, true, array_size,
+					     desc_array, array_info,
+					     value_bitmap);
+}
+EXPORT_SYMBOL_GPL(gpiod_get_array_value_cansleep);
+
+/**
+ * gpiod_set_raw_value_cansleep() - assign a gpio's raw value
+ * @desc: gpio whose value will be assigned
+ * @value: value to assign
+ *
+ * Set the raw value of the GPIO, i.e. the value of its physical line without
+ * regard for its ACTIVE_LOW status.
+ *
+ * This function is to be called from contexts that can sleep.
+ */
+void gpiod_set_raw_value_cansleep(struct gpio_desc *desc, int value)
+{
+	might_sleep_if(extra_checks);
+	VALIDATE_DESC_VOID(desc);
+	gpiod_set_raw_value_commit(desc, value);
+}
+EXPORT_SYMBOL_GPL(gpiod_set_raw_value_cansleep);
+
+/**
+ * gpiod_set_value_cansleep() - assign a gpio's value
+ * @desc: gpio whose value will be assigned
+ * @value: value to assign
+ *
+ * Set the logical value of the GPIO, i.e. taking its ACTIVE_LOW status into
+ * account
+ *
+ * This function is to be called from contexts that can sleep.
+ */
+void gpiod_set_value_cansleep(struct gpio_desc *desc, int value)
+{
+	might_sleep_if(extra_checks);
+	VALIDATE_DESC_VOID(desc);
+	gpiod_set_value_nocheck(desc, value);
+}
+EXPORT_SYMBOL_GPL(gpiod_set_value_cansleep);
+
+/**
+ * gpiod_set_raw_array_value_cansleep() - assign values to an array of GPIOs
+ * @array_size: number of elements in the descriptor array / value bitmap
+ * @desc_array: array of GPIO descriptors whose values will be assigned
+ * @array_info: information on applicability of fast bitmap processing path
+ * @value_bitmap: bitmap of values to assign
+ *
+ * Set the raw values of the GPIOs, i.e. the values of the physical lines
+ * without regard for their ACTIVE_LOW status.
+ *
+ * This function is to be called from contexts that can sleep.
+ */
+int gpiod_set_raw_array_value_cansleep(unsigned int array_size,
+				       struct gpio_desc **desc_array,
+				       struct gpio_array *array_info,
+				       unsigned long *value_bitmap)
+{
+	might_sleep_if(extra_checks);
+	if (!desc_array)
+		return -EINVAL;
+	return gpiod_set_array_value_complex(true, true, array_size, desc_array,
+				      array_info, value_bitmap);
+}
+EXPORT_SYMBOL_GPL(gpiod_set_raw_array_value_cansleep);
+
+/**
+ * gpiod_add_lookup_tables() - register GPIO device consumers
+ * @tables: list of tables of consumers to register
+ * @n: number of tables in the list
+ */
+void gpiod_add_lookup_tables(struct gpiod_lookup_table **tables, size_t n)
+{
+	unsigned int i;
+
+	mutex_lock(&gpio_lookup_lock);
+
+	for (i = 0; i < n; i++)
+		list_add_tail(&tables[i]->list, &gpio_lookup_list);
+
+	mutex_unlock(&gpio_lookup_lock);
+}
+
+/**
+ * gpiod_set_array_value_cansleep() - assign values to an array of GPIOs
+ * @array_size: number of elements in the descriptor array / value bitmap
+ * @desc_array: array of GPIO descriptors whose values will be assigned
+ * @array_info: information on applicability of fast bitmap processing path
+ * @value_bitmap: bitmap of values to assign
+ *
+ * Set the logical values of the GPIOs, i.e. taking their ACTIVE_LOW status
+ * into account.
+ *
+ * This function is to be called from contexts that can sleep.
+ */
+int gpiod_set_array_value_cansleep(unsigned int array_size,
+				   struct gpio_desc **desc_array,
+				   struct gpio_array *array_info,
+				   unsigned long *value_bitmap)
+{
+	might_sleep_if(extra_checks);
+	if (!desc_array)
+		return -EINVAL;
+	return gpiod_set_array_value_complex(false, true, array_size,
+					     desc_array, array_info,
+					     value_bitmap);
+}
+EXPORT_SYMBOL_GPL(gpiod_set_array_value_cansleep);
+
+/**
+ * gpiod_add_lookup_table() - register GPIO device consumers
+ * @table: table of consumers to register
+ */
+void gpiod_add_lookup_table(struct gpiod_lookup_table *table)
+{
+	mutex_lock(&gpio_lookup_lock);
+
+	list_add_tail(&table->list, &gpio_lookup_list);
+
+	mutex_unlock(&gpio_lookup_lock);
+}
+EXPORT_SYMBOL_GPL(gpiod_add_lookup_table);
+
+/**
+ * gpiod_remove_lookup_table() - unregister GPIO device consumers
+ * @table: table of consumers to unregister
+ */
+void gpiod_remove_lookup_table(struct gpiod_lookup_table *table)
+{
+	mutex_lock(&gpio_lookup_lock);
+
+	list_del(&table->list);
+
+	mutex_unlock(&gpio_lookup_lock);
+}
+EXPORT_SYMBOL_GPL(gpiod_remove_lookup_table);
+
+/**
+ * gpiod_add_hogs() - register a set of GPIO hogs from machine code
+ * @hogs: table of gpio hog entries with a zeroed sentinel at the end
+ */
+void gpiod_add_hogs(struct gpiod_hog *hogs)
+{
+	struct gpio_chip *gc;
+	struct gpiod_hog *hog;
+
+	mutex_lock(&gpio_machine_hogs_mutex);
+
+	for (hog = &hogs[0]; hog->chip_label; hog++) {
+		list_add_tail(&hog->list, &gpio_machine_hogs);
+
+		/*
+		 * The chip may have been registered earlier, so check if it
+		 * exists and, if so, try to hog the line now.
+		 */
+		gc = find_chip_by_name(hog->chip_label);
+		if (gc)
+			gpiochip_machine_hog(gc, hog);
+	}
+
+	mutex_unlock(&gpio_machine_hogs_mutex);
+}
+EXPORT_SYMBOL_GPL(gpiod_add_hogs);
+
+static struct gpiod_lookup_table *gpiod_find_lookup_table(struct device *dev)
+{
+	const char *dev_id = dev ? dev_name(dev) : NULL;
+	struct gpiod_lookup_table *table;
+
+	mutex_lock(&gpio_lookup_lock);
+
+	list_for_each_entry(table, &gpio_lookup_list, list) {
+		if (table->dev_id && dev_id) {
+			/*
+			 * Valid strings on both ends, must be identical to have
+			 * a match
+			 */
+			if (!strcmp(table->dev_id, dev_id))
+				goto found;
+		} else {
+			/*
+			 * One of the pointers is NULL, so both must be to have
+			 * a match
+			 */
+			if (dev_id == table->dev_id)
+				goto found;
+		}
+	}
+	table = NULL;
+
+found:
+	mutex_unlock(&gpio_lookup_lock);
+	return table;
+}
+
+static struct gpio_desc *gpiod_find(struct device *dev, const char *con_id,
+				    unsigned int idx, unsigned long *flags)
+{
+	struct gpio_desc *desc = ERR_PTR(-ENOENT);
+	struct gpiod_lookup_table *table;
+	struct gpiod_lookup *p;
+
+	table = gpiod_find_lookup_table(dev);
+	if (!table)
+		return desc;
+
+	for (p = &table->table[0]; p->key; p++) {
+		struct gpio_chip *gc;
+
+		/* idx must always match exactly */
+		if (p->idx != idx)
+			continue;
+
+		/* If the lookup entry has a con_id, require exact match */
+		if (p->con_id && (!con_id || strcmp(p->con_id, con_id)))
+			continue;
+
+		if (p->chip_hwnum == U16_MAX) {
+			desc = gpio_name_to_desc(p->key);
+			if (desc) {
+				*flags = p->flags;
+				return desc;
+			}
+
+			dev_warn(dev, "cannot find GPIO line %s, deferring\n",
+				 p->key);
+			return ERR_PTR(-EPROBE_DEFER);
+		}
+
+		gc = find_chip_by_name(p->key);
+
+		if (!gc) {
+			/*
+			 * As the lookup table indicates a chip with
+			 * p->key should exist, assume it may
+			 * still appear later and let the interested
+			 * consumer be probed again or let the Deferred
+			 * Probe infrastructure handle the error.
+			 */
+			dev_warn(dev, "cannot find GPIO chip %s, deferring\n",
+				 p->key);
+			return ERR_PTR(-EPROBE_DEFER);
+		}
+
+		if (gc->ngpio <= p->chip_hwnum) {
+			dev_err(dev,
+				"requested GPIO %u (%u) is out of range [0..%u] for chip %s\n",
+				idx, p->chip_hwnum, gc->ngpio - 1,
+				gc->label);
+			return ERR_PTR(-EINVAL);
+		}
+
+		desc = gpiochip_get_desc(gc, p->chip_hwnum);
+		*flags = p->flags;
+
+		return desc;
+	}
+
+	return desc;
+}
+
+static int platform_gpio_count(struct device *dev, const char *con_id)
+{
+	struct gpiod_lookup_table *table;
+	struct gpiod_lookup *p;
+	unsigned int count = 0;
+
+	table = gpiod_find_lookup_table(dev);
+	if (!table)
+		return -ENOENT;
+
+	for (p = &table->table[0]; p->key; p++) {
+		if ((con_id && p->con_id && !strcmp(con_id, p->con_id)) ||
+		    (!con_id && !p->con_id))
+			count++;
+	}
+	if (!count)
+		return -ENOENT;
+
+	return count;
+}
+
+/**
+ * fwnode_gpiod_get_index - obtain a GPIO from firmware node
+ * @fwnode:	handle of the firmware node
+ * @con_id:	function within the GPIO consumer
+ * @index:	index of the GPIO to obtain for the consumer
+ * @flags:	GPIO initialization flags
+ * @label:	label to attach to the requested GPIO
+ *
+ * This function can be used for drivers that get their configuration
+ * from opaque firmware.
+ *
+ * The function properly finds the corresponding GPIO using whatever is the
+ * underlying firmware interface and then makes sure that the GPIO
+ * descriptor is requested before it is returned to the caller.
+ *
+ * Returns:
+ * On successful request the GPIO pin is configured in accordance with
+ * provided @flags.
+ *
+ * In case of error an ERR_PTR() is returned.
+ */
+struct gpio_desc *fwnode_gpiod_get_index(struct fwnode_handle *fwnode,
+					 const char *con_id, int index,
+					 enum gpiod_flags flags,
+					 const char *label)
+{
+	struct gpio_desc *desc;
+	char prop_name[32]; /* 32 is max size of property name */
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(gpio_suffixes); i++) {
+		if (con_id)
+			snprintf(prop_name, sizeof(prop_name), "%s-%s",
+					    con_id, gpio_suffixes[i]);
+		else
+			snprintf(prop_name, sizeof(prop_name), "%s",
+					    gpio_suffixes[i]);
+
+		desc = fwnode_get_named_gpiod(fwnode, prop_name, index, flags,
+					      label);
+		if (!IS_ERR(desc) || (PTR_ERR(desc) != -ENOENT))
+			break;
+	}
+
+	return desc;
+}
+EXPORT_SYMBOL_GPL(fwnode_gpiod_get_index);
+
+/**
+ * gpiod_count - return the number of GPIOs associated with a device / function
+ *		or -ENOENT if no GPIO has been assigned to the requested function
+ * @dev:	GPIO consumer, can be NULL for system-global GPIOs
+ * @con_id:	function within the GPIO consumer
+ */
+int gpiod_count(struct device *dev, const char *con_id)
+{
+	int count = -ENOENT;
+
+	if (IS_ENABLED(CONFIG_OF) && dev && dev->of_node)
+		count = of_gpio_get_count(dev, con_id);
+	else if (IS_ENABLED(CONFIG_ACPI) && dev && ACPI_HANDLE(dev))
+		count = acpi_gpio_count(dev, con_id);
+
+	if (count < 0)
+		count = platform_gpio_count(dev, con_id);
+
+	return count;
+}
+EXPORT_SYMBOL_GPL(gpiod_count);
+
+/**
+ * gpiod_get - obtain a GPIO for a given GPIO function
+ * @dev:	GPIO consumer, can be NULL for system-global GPIOs
+ * @con_id:	function within the GPIO consumer
+ * @flags:	optional GPIO initialization flags
+ *
+ * Return the GPIO descriptor corresponding to the function con_id of device
+ * dev, -ENOENT if no GPIO has been assigned to the requested function, or
+ * another IS_ERR() code if an error occurred while trying to acquire the GPIO.
+ */
+struct gpio_desc *__must_check gpiod_get(struct device *dev, const char *con_id,
+					 enum gpiod_flags flags)
+{
+	return gpiod_get_index(dev, con_id, 0, flags);
+}
+EXPORT_SYMBOL_GPL(gpiod_get);
+
+/**
+ * gpiod_get_optional - obtain an optional GPIO for a given GPIO function
+ * @dev: GPIO consumer, can be NULL for system-global GPIOs
+ * @con_id: function within the GPIO consumer
+ * @flags: optional GPIO initialization flags
+ *
+ * This is equivalent to gpiod_get(), except that when no GPIO was assigned to
+ * the requested function it will return NULL. This is convenient for drivers
+ * that need to handle optional GPIOs.
+ */
+struct gpio_desc *__must_check gpiod_get_optional(struct device *dev,
+						  const char *con_id,
+						  enum gpiod_flags flags)
+{
+	return gpiod_get_index_optional(dev, con_id, 0, flags);
+}
+EXPORT_SYMBOL_GPL(gpiod_get_optional);
+
+
+/**
+ * gpiod_configure_flags - helper function to configure a given GPIO
+ * @desc:	gpio whose value will be assigned
+ * @con_id:	function within the GPIO consumer
+ * @lflags:	bitmask of gpio_lookup_flags GPIO_* values - returned from
+ *		of_find_gpio() or of_get_gpio_hog()
+ * @dflags:	gpiod_flags - optional GPIO initialization flags
+ *
+ * Return 0 on success, -ENOENT if no GPIO has been assigned to the
+ * requested function and/or index, or another IS_ERR() code if an error
+ * occurred while trying to acquire the GPIO.
+ */
+int gpiod_configure_flags(struct gpio_desc *desc, const char *con_id,
+		unsigned long lflags, enum gpiod_flags dflags)
+{
+	int ret;
+
+	if (lflags & GPIO_ACTIVE_LOW)
+		set_bit(FLAG_ACTIVE_LOW, &desc->flags);
+
+	if (lflags & GPIO_OPEN_DRAIN)
+		set_bit(FLAG_OPEN_DRAIN, &desc->flags);
+	else if (dflags & GPIOD_FLAGS_BIT_OPEN_DRAIN) {
+		/*
+		 * This enforces open drain mode from the consumer side.
+		 * This is necessary for some busses like I2C, but the lookup
+		 * should *REALLY* have specified them as open drain in the
+		 * first place, so print a little warning here.
+		 */
+		set_bit(FLAG_OPEN_DRAIN, &desc->flags);
+		gpiod_warn(desc,
+			   "enforced open drain please flag it properly in DT/ACPI DSDT/board file\n");
+	}
+
+	if (lflags & GPIO_OPEN_SOURCE)
+		set_bit(FLAG_OPEN_SOURCE, &desc->flags);
+
+	if ((lflags & GPIO_PULL_UP) && (lflags & GPIO_PULL_DOWN)) {
+		gpiod_err(desc,
+			  "both pull-up and pull-down enabled, invalid configuration\n");
+		return -EINVAL;
+	}
+
+	if (lflags & GPIO_PULL_UP)
+		set_bit(FLAG_PULL_UP, &desc->flags);
+	else if (lflags & GPIO_PULL_DOWN)
+		set_bit(FLAG_PULL_DOWN, &desc->flags);
+
+	ret = gpiod_set_transitory(desc, (lflags & GPIO_TRANSITORY));
+	if (ret < 0)
+		return ret;
+
+	/* No particular flag request, return here... */
+	if (!(dflags & GPIOD_FLAGS_BIT_DIR_SET)) {
+		gpiod_dbg(desc, "no flags found for %s\n", con_id);
+		return 0;
+	}
+
+	/* Process flags */
+	if (dflags & GPIOD_FLAGS_BIT_DIR_OUT)
+		ret = gpiod_direction_output(desc,
+				!!(dflags & GPIOD_FLAGS_BIT_DIR_VAL));
+	else
+		ret = gpiod_direction_input(desc);
+
+	return ret;
+}
+
+/**
+ * gpiod_get_index - obtain a GPIO from a multi-index GPIO function
+ * @dev:	GPIO consumer, can be NULL for system-global GPIOs
+ * @con_id:	function within the GPIO consumer
+ * @idx:	index of the GPIO to obtain in the consumer
+ * @flags:	optional GPIO initialization flags
+ *
+ * This variant of gpiod_get() allows to access GPIOs other than the first
+ * defined one for functions that define several GPIOs.
+ *
+ * Return a valid GPIO descriptor, -ENOENT if no GPIO has been assigned to the
+ * requested function and/or index, or another IS_ERR() code if an error
+ * occurred while trying to acquire the GPIO.
+ */
+struct gpio_desc *__must_check gpiod_get_index(struct device *dev,
+					       const char *con_id,
+					       unsigned int idx,
+					       enum gpiod_flags flags)
+{
+	unsigned long lookupflags = GPIO_LOOKUP_FLAGS_DEFAULT;
+	struct gpio_desc *desc = NULL;
+	int ret;
+	/* Maybe we have a device name, maybe not */
+	const char *devname = dev ? dev_name(dev) : "?";
+
+	dev_dbg(dev, "GPIO lookup for consumer %s\n", con_id);
+
+	if (dev) {
+		/* Using device tree? */
+		if (IS_ENABLED(CONFIG_OF) && dev->of_node) {
+			dev_dbg(dev, "using device tree for GPIO lookup\n");
+			desc = of_find_gpio(dev, con_id, idx, &lookupflags);
+		} else if (ACPI_COMPANION(dev)) {
+			dev_dbg(dev, "using ACPI for GPIO lookup\n");
+			desc = acpi_find_gpio(dev, con_id, idx, &flags, &lookupflags);
+		}
+	}
+
+	/*
+	 * Either we are not using DT or ACPI, or their lookup did not return
+	 * a result. In that case, use platform lookup as a fallback.
+	 */
+	if (!desc || desc == ERR_PTR(-ENOENT)) {
+		dev_dbg(dev, "using lookup tables for GPIO lookup\n");
+		desc = gpiod_find(dev, con_id, idx, &lookupflags);
+	}
+
+	if (IS_ERR(desc)) {
+		dev_dbg(dev, "No GPIO consumer %s found\n", con_id);
+		return desc;
+	}
+
+	/*
+	 * If a connection label was passed use that, else attempt to use
+	 * the device name as label
+	 */
+	ret = gpiod_request(desc, con_id ? con_id : devname);
+	if (ret < 0) {
+		if (ret == -EBUSY && flags & GPIOD_FLAGS_BIT_NONEXCLUSIVE) {
+			/*
+			 * This happens when there are several consumers for
+			 * the same GPIO line: we just return here without
+			 * further initialization. It is a bit if a hack.
+			 * This is necessary to support fixed regulators.
+			 *
+			 * FIXME: Make this more sane and safe.
+			 */
+			dev_info(dev, "nonexclusive access to GPIO for %s\n",
+				 con_id ? con_id : devname);
+			return desc;
+		} else {
+			return ERR_PTR(ret);
+		}
+	}
+
+	ret = gpiod_configure_flags(desc, con_id, lookupflags, flags);
+	if (ret < 0) {
+		dev_dbg(dev, "setup of GPIO %s failed\n", con_id);
+		gpiod_put(desc);
+		return ERR_PTR(ret);
+	}
+
+	blocking_notifier_call_chain(&desc->gdev->notifier,
+				     GPIOLINE_CHANGED_REQUESTED, desc);
+
+	return desc;
+}
+EXPORT_SYMBOL_GPL(gpiod_get_index);
+
+/**
+ * fwnode_get_named_gpiod - obtain a GPIO from firmware node
+ * @fwnode:	handle of the firmware node
+ * @propname:	name of the firmware property representing the GPIO
+ * @index:	index of the GPIO to obtain for the consumer
+ * @dflags:	GPIO initialization flags
+ * @label:	label to attach to the requested GPIO
+ *
+ * This function can be used for drivers that get their configuration
+ * from opaque firmware.
+ *
+ * The function properly finds the corresponding GPIO using whatever is the
+ * underlying firmware interface and then makes sure that the GPIO
+ * descriptor is requested before it is returned to the caller.
+ *
+ * Returns:
+ * On successful request the GPIO pin is configured in accordance with
+ * provided @dflags.
+ *
+ * In case of error an ERR_PTR() is returned.
+ */
+struct gpio_desc *fwnode_get_named_gpiod(struct fwnode_handle *fwnode,
+					 const char *propname, int index,
+					 enum gpiod_flags dflags,
+					 const char *label)
+{
+	unsigned long lflags = GPIO_LOOKUP_FLAGS_DEFAULT;
+	struct gpio_desc *desc = ERR_PTR(-ENODEV);
+	int ret;
+
+	if (!fwnode)
+		return ERR_PTR(-EINVAL);
+
+	if (is_of_node(fwnode)) {
+		desc = gpiod_get_from_of_node(to_of_node(fwnode),
+					      propname, index,
+					      dflags,
+					      label);
+		return desc;
+	} else if (is_acpi_node(fwnode)) {
+		struct acpi_gpio_info info;
+
+		desc = acpi_node_get_gpiod(fwnode, propname, index, &info);
+		if (IS_ERR(desc))
+			return desc;
+
+		acpi_gpio_update_gpiod_flags(&dflags, &info);
+		acpi_gpio_update_gpiod_lookup_flags(&lflags, &info);
+	}
+
+	/* Currently only ACPI takes this path */
+	ret = gpiod_request(desc, label);
+	if (ret)
+		return ERR_PTR(ret);
+
+	ret = gpiod_configure_flags(desc, propname, lflags, dflags);
+	if (ret < 0) {
+		gpiod_put(desc);
+		return ERR_PTR(ret);
+	}
+
+	blocking_notifier_call_chain(&desc->gdev->notifier,
+				     GPIOLINE_CHANGED_REQUESTED, desc);
+
+	return desc;
+}
+EXPORT_SYMBOL_GPL(fwnode_get_named_gpiod);
+
+/**
+ * gpiod_get_index_optional - obtain an optional GPIO from a multi-index GPIO
+ *                            function
+ * @dev: GPIO consumer, can be NULL for system-global GPIOs
+ * @con_id: function within the GPIO consumer
+ * @index: index of the GPIO to obtain in the consumer
+ * @flags: optional GPIO initialization flags
+ *
+ * This is equivalent to gpiod_get_index(), except that when no GPIO with the
+ * specified index was assigned to the requested function it will return NULL.
+ * This is convenient for drivers that need to handle optional GPIOs.
+ */
+struct gpio_desc *__must_check gpiod_get_index_optional(struct device *dev,
+							const char *con_id,
+							unsigned int index,
+							enum gpiod_flags flags)
+{
+	struct gpio_desc *desc;
+
+	desc = gpiod_get_index(dev, con_id, index, flags);
+	if (IS_ERR(desc)) {
+		if (PTR_ERR(desc) == -ENOENT)
+			return NULL;
+	}
+
+	return desc;
+}
+EXPORT_SYMBOL_GPL(gpiod_get_index_optional);
+
+/**
+ * gpiod_hog - Hog the specified GPIO desc given the provided flags
+ * @desc:	gpio whose value will be assigned
+ * @name:	gpio line name
+ * @lflags:	bitmask of gpio_lookup_flags GPIO_* values - returned from
+ *		of_find_gpio() or of_get_gpio_hog()
+ * @dflags:	gpiod_flags - optional GPIO initialization flags
+ */
+int gpiod_hog(struct gpio_desc *desc, const char *name,
+	      unsigned long lflags, enum gpiod_flags dflags)
+{
+	struct gpio_chip *gc;
+	struct gpio_desc *local_desc;
+	int hwnum;
+	int ret;
+
+	gc = gpiod_to_chip(desc);
+	hwnum = gpio_chip_hwgpio(desc);
+
+	local_desc = gpiochip_request_own_desc(gc, hwnum, name,
+					       lflags, dflags);
+	if (IS_ERR(local_desc)) {
+		ret = PTR_ERR(local_desc);
+		pr_err("requesting hog GPIO %s (chip %s, offset %d) failed, %d\n",
+		       name, gc->label, hwnum, ret);
+		return ret;
+	}
+
+	/* Mark GPIO as hogged so it can be identified and removed later */
+	set_bit(FLAG_IS_HOGGED, &desc->flags);
+
+	gpiod_info(desc, "hogged as %s%s\n",
+		(dflags & GPIOD_FLAGS_BIT_DIR_OUT) ? "output" : "input",
+		(dflags & GPIOD_FLAGS_BIT_DIR_OUT) ?
+		  (dflags & GPIOD_FLAGS_BIT_DIR_VAL) ? "/high" : "/low" : "");
+
+	return 0;
+}
+
+/**
+ * gpiochip_free_hogs - Scan gpio-controller chip and release GPIO hog
+ * @gc:	gpio chip to act on
+ */
+static void gpiochip_free_hogs(struct gpio_chip *gc)
+{
+	int id;
+
+	for (id = 0; id < gc->ngpio; id++) {
+		if (test_bit(FLAG_IS_HOGGED, &gc->gpiodev->descs[id].flags))
+			gpiochip_free_own_desc(&gc->gpiodev->descs[id]);
+	}
+}
+
+/**
+ * gpiod_get_array - obtain multiple GPIOs from a multi-index GPIO function
+ * @dev:	GPIO consumer, can be NULL for system-global GPIOs
+ * @con_id:	function within the GPIO consumer
+ * @flags:	optional GPIO initialization flags
+ *
+ * This function acquires all the GPIOs defined under a given function.
+ *
+ * Return a struct gpio_descs containing an array of descriptors, -ENOENT if
+ * no GPIO has been assigned to the requested function, or another IS_ERR()
+ * code if an error occurred while trying to acquire the GPIOs.
+ */
+struct gpio_descs *__must_check gpiod_get_array(struct device *dev,
+						const char *con_id,
+						enum gpiod_flags flags)
+{
+	struct gpio_desc *desc;
+	struct gpio_descs *descs;
+	struct gpio_array *array_info = NULL;
+	struct gpio_chip *gc;
+	int count, bitmap_size;
+
+	count = gpiod_count(dev, con_id);
+	if (count < 0)
+		return ERR_PTR(count);
+
+	descs = kzalloc(struct_size(descs, desc, count), GFP_KERNEL);
+	if (!descs)
+		return ERR_PTR(-ENOMEM);
+
+	for (descs->ndescs = 0; descs->ndescs < count; ) {
+		desc = gpiod_get_index(dev, con_id, descs->ndescs, flags);
+		if (IS_ERR(desc)) {
+			gpiod_put_array(descs);
+			return ERR_CAST(desc);
+		}
+
+		descs->desc[descs->ndescs] = desc;
+
+		gc = gpiod_to_chip(desc);
+		/*
+		 * If pin hardware number of array member 0 is also 0, select
+		 * its chip as a candidate for fast bitmap processing path.
+		 */
+		if (descs->ndescs == 0 && gpio_chip_hwgpio(desc) == 0) {
+			struct gpio_descs *array;
+
+			bitmap_size = BITS_TO_LONGS(gc->ngpio > count ?
+						    gc->ngpio : count);
+
+			array = kzalloc(struct_size(descs, desc, count) +
+					struct_size(array_info, invert_mask,
+					3 * bitmap_size), GFP_KERNEL);
+			if (!array) {
+				gpiod_put_array(descs);
+				return ERR_PTR(-ENOMEM);
+			}
+
+			memcpy(array, descs,
+			       struct_size(descs, desc, descs->ndescs + 1));
+			kfree(descs);
+
+			descs = array;
+			array_info = (void *)(descs->desc + count);
+			array_info->get_mask = array_info->invert_mask +
+						  bitmap_size;
+			array_info->set_mask = array_info->get_mask +
+						  bitmap_size;
+
+			array_info->desc = descs->desc;
+			array_info->size = count;
+			array_info->chip = gc;
+			bitmap_set(array_info->get_mask, descs->ndescs,
+				   count - descs->ndescs);
+			bitmap_set(array_info->set_mask, descs->ndescs,
+				   count - descs->ndescs);
+			descs->info = array_info;
+		}
+		/* Unmark array members which don't belong to the 'fast' chip */
+		if (array_info && array_info->chip != gc) {
+			__clear_bit(descs->ndescs, array_info->get_mask);
+			__clear_bit(descs->ndescs, array_info->set_mask);
+		}
+		/*
+		 * Detect array members which belong to the 'fast' chip
+		 * but their pins are not in hardware order.
+		 */
+		else if (array_info &&
+			   gpio_chip_hwgpio(desc) != descs->ndescs) {
+			/*
+			 * Don't use fast path if all array members processed so
+			 * far belong to the same chip as this one but its pin
+			 * hardware number is different from its array index.
+			 */
+			if (bitmap_full(array_info->get_mask, descs->ndescs)) {
+				array_info = NULL;
+			} else {
+				__clear_bit(descs->ndescs,
+					    array_info->get_mask);
+				__clear_bit(descs->ndescs,
+					    array_info->set_mask);
+			}
+		} else if (array_info) {
+			/* Exclude open drain or open source from fast output */
+			if (gpiochip_line_is_open_drain(gc, descs->ndescs) ||
+			    gpiochip_line_is_open_source(gc, descs->ndescs))
+				__clear_bit(descs->ndescs,
+					    array_info->set_mask);
+			/* Identify 'fast' pins which require invertion */
+			if (gpiod_is_active_low(desc))
+				__set_bit(descs->ndescs,
+					  array_info->invert_mask);
+		}
+
+		descs->ndescs++;
+	}
+	if (array_info)
+		dev_dbg(dev,
+			"GPIO array info: chip=%s, size=%d, get_mask=%lx, set_mask=%lx, invert_mask=%lx\n",
+			array_info->chip->label, array_info->size,
+			*array_info->get_mask, *array_info->set_mask,
+			*array_info->invert_mask);
+	return descs;
+}
+EXPORT_SYMBOL_GPL(gpiod_get_array);
+
+/**
+ * gpiod_get_array_optional - obtain multiple GPIOs from a multi-index GPIO
+ *                            function
+ * @dev:	GPIO consumer, can be NULL for system-global GPIOs
+ * @con_id:	function within the GPIO consumer
+ * @flags:	optional GPIO initialization flags
+ *
+ * This is equivalent to gpiod_get_array(), except that when no GPIO was
+ * assigned to the requested function it will return NULL.
+ */
+struct gpio_descs *__must_check gpiod_get_array_optional(struct device *dev,
+							const char *con_id,
+							enum gpiod_flags flags)
+{
+	struct gpio_descs *descs;
+
+	descs = gpiod_get_array(dev, con_id, flags);
+	if (PTR_ERR(descs) == -ENOENT)
+		return NULL;
+
+	return descs;
+}
+EXPORT_SYMBOL_GPL(gpiod_get_array_optional);
+
+/**
+ * gpiod_put - dispose of a GPIO descriptor
+ * @desc:	GPIO descriptor to dispose of
+ *
+ * No descriptor can be used after gpiod_put() has been called on it.
+ */
+void gpiod_put(struct gpio_desc *desc)
+{
+	if (desc)
+		gpiod_free(desc);
+}
+EXPORT_SYMBOL_GPL(gpiod_put);
+
+/**
+ * gpiod_put_array - dispose of multiple GPIO descriptors
+ * @descs:	struct gpio_descs containing an array of descriptors
+ */
+void gpiod_put_array(struct gpio_descs *descs)
+{
+	unsigned int i;
+
+	for (i = 0; i < descs->ndescs; i++)
+		gpiod_put(descs->desc[i]);
+
+	kfree(descs);
+}
+EXPORT_SYMBOL_GPL(gpiod_put_array);
+
+static int __init gpiolib_dev_init(void)
+{
+	int ret;
+
+	/* Register GPIO sysfs bus */
+	ret = bus_register(&gpio_bus_type);
+	if (ret < 0) {
+		pr_err("gpiolib: could not register GPIO bus type\n");
+		return ret;
+	}
+
+	ret = alloc_chrdev_region(&gpio_devt, 0, GPIO_DEV_MAX, GPIOCHIP_NAME);
+	if (ret < 0) {
+		pr_err("gpiolib: failed to allocate char dev region\n");
+		bus_unregister(&gpio_bus_type);
+		return ret;
+	}
+
+	gpiolib_initialized = true;
+	gpiochip_setup_devs();
+
+#if IS_ENABLED(CONFIG_OF_DYNAMIC) && IS_ENABLED(CONFIG_OF_GPIO)
+	WARN_ON(of_reconfig_notifier_register(&gpio_of_notifier));
+#endif /* CONFIG_OF_DYNAMIC && CONFIG_OF_GPIO */
+
+	return ret;
+}
+core_initcall(gpiolib_dev_init);
+
+#ifdef CONFIG_DEBUG_FS
+
+static void gpiolib_dbg_show(struct seq_file *s, struct gpio_device *gdev)
+{
+	unsigned		i;
+	struct gpio_chip	*gc = gdev->chip;
+	unsigned		gpio = gdev->base;
+	struct gpio_desc	*gdesc = &gdev->descs[0];
+	bool			is_out;
+	bool			is_irq;
+	bool			active_low;
+
+	for (i = 0; i < gdev->ngpio; i++, gpio++, gdesc++) {
+		if (!test_bit(FLAG_REQUESTED, &gdesc->flags)) {
+			if (gdesc->name) {
+				seq_printf(s, " gpio-%-3d (%-20.20s)\n",
+					   gpio, gdesc->name);
+			}
+			continue;
+		}
+
+		gpiod_get_direction(gdesc);
+		is_out = test_bit(FLAG_IS_OUT, &gdesc->flags);
+		is_irq = test_bit(FLAG_USED_AS_IRQ, &gdesc->flags);
+		active_low = test_bit(FLAG_ACTIVE_LOW, &gdesc->flags);
+		seq_printf(s, " gpio-%-3d (%-20.20s|%-20.20s) %s %s %s%s",
+			gpio, gdesc->name ? gdesc->name : "", gdesc->label,
+			is_out ? "out" : "in ",
+			gc->get ? (gc->get(gc, i) ? "hi" : "lo") : "?  ",
+			is_irq ? "IRQ " : "",
+			active_low ? "ACTIVE LOW" : "");
+		seq_printf(s, "\n");
+	}
+}
+
+static void *gpiolib_seq_start(struct seq_file *s, loff_t *pos)
+{
+	unsigned long flags;
+	struct gpio_device *gdev = NULL;
+	loff_t index = *pos;
+
+	s->private = "";
+
+	spin_lock_irqsave(&gpio_lock, flags);
+	list_for_each_entry(gdev, &gpio_devices, list)
+		if (index-- == 0) {
+			spin_unlock_irqrestore(&gpio_lock, flags);
+			return gdev;
+		}
+	spin_unlock_irqrestore(&gpio_lock, flags);
+
+	return NULL;
+}
+
+static void *gpiolib_seq_next(struct seq_file *s, void *v, loff_t *pos)
+{
+	unsigned long flags;
+	struct gpio_device *gdev = v;
+	void *ret = NULL;
+
+	spin_lock_irqsave(&gpio_lock, flags);
+	if (list_is_last(&gdev->list, &gpio_devices))
+		ret = NULL;
+	else
+		ret = list_entry(gdev->list.next, struct gpio_device, list);
+	spin_unlock_irqrestore(&gpio_lock, flags);
+
+	s->private = "\n";
+	++*pos;
+
+	return ret;
+}
+
+static void gpiolib_seq_stop(struct seq_file *s, void *v)
+{
+}
+
+static int gpiolib_seq_show(struct seq_file *s, void *v)
+{
+	struct gpio_device *gdev = v;
+	struct gpio_chip *gc = gdev->chip;
+	struct device *parent;
+
+	if (!gc) {
+		seq_printf(s, "%s%s: (dangling chip)", (char *)s->private,
+			   dev_name(&gdev->dev));
+		return 0;
+	}
+
+	seq_printf(s, "%s%s: GPIOs %d-%d", (char *)s->private,
+		   dev_name(&gdev->dev),
+		   gdev->base, gdev->base + gdev->ngpio - 1);
+	parent = gc->parent;
+	if (parent)
+		seq_printf(s, ", parent: %s/%s",
+			   parent->bus ? parent->bus->name : "no-bus",
+			   dev_name(parent));
+	if (gc->label)
+		seq_printf(s, ", %s", gc->label);
+	if (gc->can_sleep)
+		seq_printf(s, ", can sleep");
+	seq_printf(s, ":\n");
+
+	if (gc->dbg_show)
+		gc->dbg_show(s, gc);
+	else
+		gpiolib_dbg_show(s, gdev);
+
+	return 0;
+}
+
+static const struct seq_operations gpiolib_sops = {
+	.start = gpiolib_seq_start,
+	.next = gpiolib_seq_next,
+	.stop = gpiolib_seq_stop,
+	.show = gpiolib_seq_show,
+};
+DEFINE_SEQ_ATTRIBUTE(gpiolib);
+
+static int __init gpiolib_debugfs_init(void)
+{
+	/* /sys/kernel/debug/gpio */
+	debugfs_create_file("gpio", 0444, NULL, NULL, &gpiolib_fops);
+	return 0;
+}
+subsys_initcall(gpiolib_debugfs_init);
+
+#endif	/* DEBUG_FS */
diff --git a/drivers/gpio/gpiolib.h b/drivers/gpio/gpiolib.h
new file mode 100644
index 000000000..b674b5bb9
--- /dev/null
+++ b/drivers/gpio/gpiolib.h
@@ -0,0 +1,184 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Internal GPIO functions.
+ *
+ * Copyright (C) 2013, Intel Corporation
+ * Author: Mika Westerberg <mika.westerberg@linux.intel.com>
+ */
+
+#ifndef GPIOLIB_H
+#define GPIOLIB_H
+
+#include <linux/gpio/driver.h>
+#include <linux/gpio/consumer.h> /* for enum gpiod_flags */
+#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/cdev.h>
+
+#define GPIOCHIP_NAME	"gpiochip"
+
+/**
+ * struct gpio_device - internal state container for GPIO devices
+ * @id: numerical ID number for the GPIO chip
+ * @dev: the GPIO device struct
+ * @chrdev: character device for the GPIO device
+ * @mockdev: class device used by the deprecated sysfs interface (may be
+ * NULL)
+ * @owner: helps prevent removal of modules exporting active GPIOs
+ * @chip: pointer to the corresponding gpiochip, holding static
+ * data for this device
+ * @descs: array of ngpio descriptors.
+ * @ngpio: the number of GPIO lines on this GPIO device, equal to the size
+ * of the @descs array.
+ * @base: GPIO base in the DEPRECATED global Linux GPIO numberspace, assigned
+ * at device creation time.
+ * @label: a descriptive name for the GPIO device, such as the part number
+ * or name of the IP component in a System on Chip.
+ * @data: per-instance data assigned by the driver
+ * @list: links gpio_device:s together for traversal
+ *
+ * This state container holds most of the runtime variable data
+ * for a GPIO device and can hold references and live on after the
+ * GPIO chip has been removed, if it is still being used from
+ * userspace.
+ */
+struct gpio_device {
+	int			id;
+	struct device		dev;
+	struct cdev		chrdev;
+	struct device		*mockdev;
+	struct module		*owner;
+	struct gpio_chip	*chip;
+	struct gpio_desc	*descs;
+	int			base;
+	u16			ngpio;
+	const char		*label;
+	void			*data;
+	struct list_head        list;
+	struct blocking_notifier_head notifier;
+
+#ifdef CONFIG_PINCTRL
+	/*
+	 * If CONFIG_PINCTRL is enabled, then gpio controllers can optionally
+	 * describe the actual pin range which they serve in an SoC. This
+	 * information would be used by pinctrl subsystem to configure
+	 * corresponding pins for gpio usage.
+	 */
+	struct list_head pin_ranges;
+#endif
+};
+
+/* gpio suffixes used for ACPI and device tree lookup */
+static __maybe_unused const char * const gpio_suffixes[] = { "gpios", "gpio" };
+
+struct gpio_array {
+	struct gpio_desc	**desc;
+	unsigned int		size;
+	struct gpio_chip	*chip;
+	unsigned long		*get_mask;
+	unsigned long		*set_mask;
+	unsigned long		invert_mask[];
+};
+
+struct gpio_desc *gpiochip_get_desc(struct gpio_chip *gc, unsigned int hwnum);
+int gpiod_get_array_value_complex(bool raw, bool can_sleep,
+				  unsigned int array_size,
+				  struct gpio_desc **desc_array,
+				  struct gpio_array *array_info,
+				  unsigned long *value_bitmap);
+int gpiod_set_array_value_complex(bool raw, bool can_sleep,
+				  unsigned int array_size,
+				  struct gpio_desc **desc_array,
+				  struct gpio_array *array_info,
+				  unsigned long *value_bitmap);
+
+extern spinlock_t gpio_lock;
+extern struct list_head gpio_devices;
+
+struct gpio_desc {
+	struct gpio_device	*gdev;
+	unsigned long		flags;
+/* flag symbols are bit numbers */
+#define FLAG_REQUESTED	0
+#define FLAG_IS_OUT	1
+#define FLAG_EXPORT	2	/* protected by sysfs_lock */
+#define FLAG_SYSFS	3	/* exported via /sys/class/gpio/control */
+#define FLAG_ACTIVE_LOW	6	/* value has active low */
+#define FLAG_OPEN_DRAIN	7	/* Gpio is open drain type */
+#define FLAG_OPEN_SOURCE 8	/* Gpio is open source type */
+#define FLAG_USED_AS_IRQ 9	/* GPIO is connected to an IRQ */
+#define FLAG_IRQ_IS_ENABLED 10	/* GPIO is connected to an enabled IRQ */
+#define FLAG_IS_HOGGED	11	/* GPIO is hogged */
+#define FLAG_TRANSITORY 12	/* GPIO may lose value in sleep or reset */
+#define FLAG_PULL_UP    13	/* GPIO has pull up enabled */
+#define FLAG_PULL_DOWN  14	/* GPIO has pull down enabled */
+#define FLAG_BIAS_DISABLE    15	/* GPIO has pull disabled */
+#define FLAG_EDGE_RISING     16	/* GPIO CDEV detects rising edge events */
+#define FLAG_EDGE_FALLING    17	/* GPIO CDEV detects falling edge events */
+
+	/* Connection label */
+	const char		*label;
+	/* Name of the GPIO */
+	const char		*name;
+#ifdef CONFIG_OF_DYNAMIC
+	struct device_node	*hog;
+#endif
+#ifdef CONFIG_GPIO_CDEV
+	/* debounce period in microseconds */
+	unsigned int		debounce_period_us;
+#endif
+};
+
+int gpiod_request(struct gpio_desc *desc, const char *label);
+void gpiod_free(struct gpio_desc *desc);
+int gpiod_configure_flags(struct gpio_desc *desc, const char *con_id,
+		unsigned long lflags, enum gpiod_flags dflags);
+int gpiod_hog(struct gpio_desc *desc, const char *name,
+		unsigned long lflags, enum gpiod_flags dflags);
+
+/*
+ * Return the GPIO number of the passed descriptor relative to its chip
+ */
+static inline int gpio_chip_hwgpio(const struct gpio_desc *desc)
+{
+	return desc - &desc->gdev->descs[0];
+}
+
+/* With descriptor prefix */
+
+#define gpiod_emerg(desc, fmt, ...)					       \
+	pr_emerg("gpio-%d (%s): " fmt, desc_to_gpio(desc), desc->label ? : "?",\
+		 ##__VA_ARGS__)
+#define gpiod_crit(desc, fmt, ...)					       \
+	pr_crit("gpio-%d (%s): " fmt, desc_to_gpio(desc), desc->label ? : "?", \
+		 ##__VA_ARGS__)
+#define gpiod_err(desc, fmt, ...)					       \
+	pr_err("gpio-%d (%s): " fmt, desc_to_gpio(desc), desc->label ? : "?",  \
+		 ##__VA_ARGS__)
+#define gpiod_warn(desc, fmt, ...)					       \
+	pr_warn("gpio-%d (%s): " fmt, desc_to_gpio(desc), desc->label ? : "?", \
+		 ##__VA_ARGS__)
+#define gpiod_info(desc, fmt, ...)					       \
+	pr_info("gpio-%d (%s): " fmt, desc_to_gpio(desc), desc->label ? : "?", \
+		 ##__VA_ARGS__)
+#define gpiod_dbg(desc, fmt, ...)					       \
+	pr_debug("gpio-%d (%s): " fmt, desc_to_gpio(desc), desc->label ? : "?",\
+		 ##__VA_ARGS__)
+
+/* With chip prefix */
+
+#define chip_emerg(gc, fmt, ...)					\
+	dev_emerg(&gc->gpiodev->dev, "(%s): " fmt, gc->label, ##__VA_ARGS__)
+#define chip_crit(gc, fmt, ...)					\
+	dev_crit(&gc->gpiodev->dev, "(%s): " fmt, gc->label, ##__VA_ARGS__)
+#define chip_err(gc, fmt, ...)					\
+	dev_err(&gc->gpiodev->dev, "(%s): " fmt, gc->label, ##__VA_ARGS__)
+#define chip_warn(gc, fmt, ...)					\
+	dev_warn(&gc->gpiodev->dev, "(%s): " fmt, gc->label, ##__VA_ARGS__)
+#define chip_info(gc, fmt, ...)					\
+	dev_info(&gc->gpiodev->dev, "(%s): " fmt, gc->label, ##__VA_ARGS__)
+#define chip_dbg(gc, fmt, ...)					\
+	dev_dbg(&gc->gpiodev->dev, "(%s): " fmt, gc->label, ##__VA_ARGS__)
+
+#endif /* GPIOLIB_H */