Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 2649 insertions, 0 deletions

diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
new file mode 100644
index 000000000..c4ed4f1b3
--- /dev/null
+++ b/drivers/gpu/drm/drm_connector.c
@@ -0,0 +1,2649 @@
+/*
+ * Copyright (c) 2016 Intel Corporation
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that copyright
+ * notice and this permission notice appear in supporting documentation, and
+ * that the name of the copyright holders not be used in advertising or
+ * publicity pertaining to distribution of the software without specific,
+ * written prior permission.  The copyright holders make no representations
+ * about the suitability of this software for any purpose.  It is provided "as
+ * is" without express or implied warranty.
+ *
+ * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+ * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+ * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
+ * OF THIS SOFTWARE.
+ */
+
+#include <drm/drm_connector.h>
+#include <drm/drm_edid.h>
+#include <drm/drm_encoder.h>
+#include <drm/drm_utils.h>
+#include <drm/drm_print.h>
+#include <drm/drm_drv.h>
+#include <drm/drm_file.h>
+#include <drm/drm_sysfs.h>
+
+#include <linux/uaccess.h>
+
+#include "drm_crtc_internal.h"
+#include "drm_internal.h"
+
+/**
+ * DOC: overview
+ *
+ * In DRM connectors are the general abstraction for display sinks, and include
+ * also fixed panels or anything else that can display pixels in some form. As
+ * opposed to all other KMS objects representing hardware (like CRTC, encoder or
+ * plane abstractions) connectors can be hotplugged and unplugged at runtime.
+ * Hence they are reference-counted using drm_connector_get() and
+ * drm_connector_put().
+ *
+ * KMS driver must create, initialize, register and attach at a &struct
+ * drm_connector for each such sink. The instance is created as other KMS
+ * objects and initialized by setting the following fields. The connector is
+ * initialized with a call to drm_connector_init() with a pointer to the
+ * &struct drm_connector_funcs and a connector type, and then exposed to
+ * userspace with a call to drm_connector_register().
+ *
+ * Connectors must be attached to an encoder to be used. For devices that map
+ * connectors to encoders 1:1, the connector should be attached at
+ * initialization time with a call to drm_connector_attach_encoder(). The
+ * driver must also set the &drm_connector.encoder field to point to the
+ * attached encoder.
+ *
+ * For connectors which are not fixed (like built-in panels) the driver needs to
+ * support hotplug notifications. The simplest way to do that is by using the
+ * probe helpers, see drm_kms_helper_poll_init() for connectors which don't have
+ * hardware support for hotplug interrupts. Connectors with hardware hotplug
+ * support can instead use e.g. drm_helper_hpd_irq_event().
+ */
+
+/*
+ * Global connector list for drm_connector_find_by_fwnode().
+ * Note drm_connector_[un]register() first take connector->lock and then
+ * take the connector_list_lock.
+ */
+static DEFINE_MUTEX(connector_list_lock);
+static LIST_HEAD(connector_list);
+
+struct drm_conn_prop_enum_list {
+	int type;
+	const char *name;
+	struct ida ida;
+};
+
+/*
+ * Connector and encoder types.
+ */
+static struct drm_conn_prop_enum_list drm_connector_enum_list[] = {
+	{ DRM_MODE_CONNECTOR_Unknown, "Unknown" },
+	{ DRM_MODE_CONNECTOR_VGA, "VGA" },
+	{ DRM_MODE_CONNECTOR_DVII, "DVI-I" },
+	{ DRM_MODE_CONNECTOR_DVID, "DVI-D" },
+	{ DRM_MODE_CONNECTOR_DVIA, "DVI-A" },
+	{ DRM_MODE_CONNECTOR_Composite, "Composite" },
+	{ DRM_MODE_CONNECTOR_SVIDEO, "SVIDEO" },
+	{ DRM_MODE_CONNECTOR_LVDS, "LVDS" },
+	{ DRM_MODE_CONNECTOR_Component, "Component" },
+	{ DRM_MODE_CONNECTOR_9PinDIN, "DIN" },
+	{ DRM_MODE_CONNECTOR_DisplayPort, "DP" },
+	{ DRM_MODE_CONNECTOR_HDMIA, "HDMI-A" },
+	{ DRM_MODE_CONNECTOR_HDMIB, "HDMI-B" },
+	{ DRM_MODE_CONNECTOR_TV, "TV" },
+	{ DRM_MODE_CONNECTOR_eDP, "eDP" },
+	{ DRM_MODE_CONNECTOR_VIRTUAL, "Virtual" },
+	{ DRM_MODE_CONNECTOR_DSI, "DSI" },
+	{ DRM_MODE_CONNECTOR_DPI, "DPI" },
+	{ DRM_MODE_CONNECTOR_WRITEBACK, "Writeback" },
+	{ DRM_MODE_CONNECTOR_SPI, "SPI" },
+};
+
+void drm_connector_ida_init(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(drm_connector_enum_list); i++)
+		ida_init(&drm_connector_enum_list[i].ida);
+}
+
+void drm_connector_ida_destroy(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(drm_connector_enum_list); i++)
+		ida_destroy(&drm_connector_enum_list[i].ida);
+}
+
+/**
+ * drm_get_connector_type_name - return a string for connector type
+ * @type: The connector type (DRM_MODE_CONNECTOR_*)
+ *
+ * Returns: the name of the connector type, or NULL if the type is not valid.
+ */
+const char *drm_get_connector_type_name(unsigned int type)
+{
+	if (type < ARRAY_SIZE(drm_connector_enum_list))
+		return drm_connector_enum_list[type].name;
+
+	return NULL;
+}
+EXPORT_SYMBOL(drm_get_connector_type_name);
+
+/**
+ * drm_connector_get_cmdline_mode - reads the user's cmdline mode
+ * @connector: connector to query
+ *
+ * The kernel supports per-connector configuration of its consoles through
+ * use of the video= parameter. This function parses that option and
+ * extracts the user's specified mode (or enable/disable status) for a
+ * particular connector. This is typically only used during the early fbdev
+ * setup.
+ */
+static void drm_connector_get_cmdline_mode(struct drm_connector *connector)
+{
+	struct drm_cmdline_mode *mode = &connector->cmdline_mode;
+	char *option = NULL;
+
+	if (fb_get_options(connector->name, &option))
+		return;
+
+	if (!drm_mode_parse_command_line_for_connector(option,
+						       connector,
+						       mode))
+		return;
+
+	if (mode->force) {
+		DRM_INFO("forcing %s connector %s\n", connector->name,
+			 drm_get_connector_force_name(mode->force));
+		connector->force = mode->force;
+	}
+
+	if (mode->panel_orientation != DRM_MODE_PANEL_ORIENTATION_UNKNOWN) {
+		DRM_INFO("cmdline forces connector %s panel_orientation to %d\n",
+			 connector->name, mode->panel_orientation);
+		drm_connector_set_panel_orientation(connector,
+						    mode->panel_orientation);
+	}
+
+	DRM_DEBUG_KMS("cmdline mode for connector %s %s %dx%d@%dHz%s%s%s\n",
+		      connector->name, mode->name,
+		      mode->xres, mode->yres,
+		      mode->refresh_specified ? mode->refresh : 60,
+		      mode->rb ? " reduced blanking" : "",
+		      mode->margins ? " with margins" : "",
+		      mode->interlace ?  " interlaced" : "");
+}
+
+static void drm_connector_free(struct kref *kref)
+{
+	struct drm_connector *connector =
+		container_of(kref, struct drm_connector, base.refcount);
+	struct drm_device *dev = connector->dev;
+
+	drm_mode_object_unregister(dev, &connector->base);
+	connector->funcs->destroy(connector);
+}
+
+void drm_connector_free_work_fn(struct work_struct *work)
+{
+	struct drm_connector *connector, *n;
+	struct drm_device *dev =
+		container_of(work, struct drm_device, mode_config.connector_free_work);
+	struct drm_mode_config *config = &dev->mode_config;
+	unsigned long flags;
+	struct llist_node *freed;
+
+	spin_lock_irqsave(&config->connector_list_lock, flags);
+	freed = llist_del_all(&config->connector_free_list);
+	spin_unlock_irqrestore(&config->connector_list_lock, flags);
+
+	llist_for_each_entry_safe(connector, n, freed, free_node) {
+		drm_mode_object_unregister(dev, &connector->base);
+		connector->funcs->destroy(connector);
+	}
+}
+
+/**
+ * drm_connector_init - Init a preallocated connector
+ * @dev: DRM device
+ * @connector: the connector to init
+ * @funcs: callbacks for this connector
+ * @connector_type: user visible type of the connector
+ *
+ * Initialises a preallocated connector. Connectors should be
+ * subclassed as part of driver connector objects.
+ *
+ * Returns:
+ * Zero on success, error code on failure.
+ */
+int drm_connector_init(struct drm_device *dev,
+		       struct drm_connector *connector,
+		       const struct drm_connector_funcs *funcs,
+		       int connector_type)
+{
+	struct drm_mode_config *config = &dev->mode_config;
+	int ret;
+	struct ida *connector_ida =
+		&drm_connector_enum_list[connector_type].ida;
+
+	WARN_ON(drm_drv_uses_atomic_modeset(dev) &&
+		(!funcs->atomic_destroy_state ||
+		 !funcs->atomic_duplicate_state));
+
+	ret = __drm_mode_object_add(dev, &connector->base,
+				    DRM_MODE_OBJECT_CONNECTOR,
+				    false, drm_connector_free);
+	if (ret)
+		return ret;
+
+	connector->base.properties = &connector->properties;
+	connector->dev = dev;
+	connector->funcs = funcs;
+
+	/* connector index is used with 32bit bitmasks */
+	ret = ida_simple_get(&config->connector_ida, 0, 32, GFP_KERNEL);
+	if (ret < 0) {
+		DRM_DEBUG_KMS("Failed to allocate %s connector index: %d\n",
+			      drm_connector_enum_list[connector_type].name,
+			      ret);
+		goto out_put;
+	}
+	connector->index = ret;
+	ret = 0;
+
+	connector->connector_type = connector_type;
+	connector->connector_type_id =
+		ida_simple_get(connector_ida, 1, 0, GFP_KERNEL);
+	if (connector->connector_type_id < 0) {
+		ret = connector->connector_type_id;
+		goto out_put_id;
+	}
+	connector->name =
+		kasprintf(GFP_KERNEL, "%s-%d",
+			  drm_connector_enum_list[connector_type].name,
+			  connector->connector_type_id);
+	if (!connector->name) {
+		ret = -ENOMEM;
+		goto out_put_type_id;
+	}
+
+	INIT_LIST_HEAD(&connector->global_connector_list_entry);
+	INIT_LIST_HEAD(&connector->probed_modes);
+	INIT_LIST_HEAD(&connector->modes);
+	mutex_init(&connector->mutex);
+	connector->edid_blob_ptr = NULL;
+	connector->epoch_counter = 0;
+	connector->tile_blob_ptr = NULL;
+	connector->status = connector_status_unknown;
+	connector->display_info.panel_orientation =
+		DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
+
+	drm_connector_get_cmdline_mode(connector);
+
+	/* We should add connectors at the end to avoid upsetting the connector
+	 * index too much. */
+	spin_lock_irq(&config->connector_list_lock);
+	list_add_tail(&connector->head, &config->connector_list);
+	config->num_connector++;
+	spin_unlock_irq(&config->connector_list_lock);
+
+	if (connector_type != DRM_MODE_CONNECTOR_VIRTUAL &&
+	    connector_type != DRM_MODE_CONNECTOR_WRITEBACK)
+		drm_connector_attach_edid_property(connector);
+
+	drm_object_attach_property(&connector->base,
+				      config->dpms_property, 0);
+
+	drm_object_attach_property(&connector->base,
+				   config->link_status_property,
+				   0);
+
+	drm_object_attach_property(&connector->base,
+				   config->non_desktop_property,
+				   0);
+	drm_object_attach_property(&connector->base,
+				   config->tile_property,
+				   0);
+
+	if (drm_core_check_feature(dev, DRIVER_ATOMIC)) {
+		drm_object_attach_property(&connector->base, config->prop_crtc_id, 0);
+	}
+
+	connector->debugfs_entry = NULL;
+out_put_type_id:
+	if (ret)
+		ida_simple_remove(connector_ida, connector->connector_type_id);
+out_put_id:
+	if (ret)
+		ida_simple_remove(&config->connector_ida, connector->index);
+out_put:
+	if (ret)
+		drm_mode_object_unregister(dev, &connector->base);
+
+	return ret;
+}
+EXPORT_SYMBOL(drm_connector_init);
+
+/**
+ * drm_connector_init_with_ddc - Init a preallocated connector
+ * @dev: DRM device
+ * @connector: the connector to init
+ * @funcs: callbacks for this connector
+ * @connector_type: user visible type of the connector
+ * @ddc: pointer to the associated ddc adapter
+ *
+ * Initialises a preallocated connector. Connectors should be
+ * subclassed as part of driver connector objects.
+ *
+ * Ensures that the ddc field of the connector is correctly set.
+ *
+ * Returns:
+ * Zero on success, error code on failure.
+ */
+int drm_connector_init_with_ddc(struct drm_device *dev,
+				struct drm_connector *connector,
+				const struct drm_connector_funcs *funcs,
+				int connector_type,
+				struct i2c_adapter *ddc)
+{
+	int ret;
+
+	ret = drm_connector_init(dev, connector, funcs, connector_type);
+	if (ret)
+		return ret;
+
+	/* provide ddc symlink in sysfs */
+	connector->ddc = ddc;
+
+	return ret;
+}
+EXPORT_SYMBOL(drm_connector_init_with_ddc);
+
+/**
+ * drm_connector_attach_edid_property - attach edid property.
+ * @connector: the connector
+ *
+ * Some connector types like DRM_MODE_CONNECTOR_VIRTUAL do not get a
+ * edid property attached by default.  This function can be used to
+ * explicitly enable the edid property in these cases.
+ */
+void drm_connector_attach_edid_property(struct drm_connector *connector)
+{
+	struct drm_mode_config *config = &connector->dev->mode_config;
+
+	drm_object_attach_property(&connector->base,
+				   config->edid_property,
+				   0);
+}
+EXPORT_SYMBOL(drm_connector_attach_edid_property);
+
+/**
+ * drm_connector_attach_encoder - attach a connector to an encoder
+ * @connector: connector to attach
+ * @encoder: encoder to attach @connector to
+ *
+ * This function links up a connector to an encoder. Note that the routing
+ * restrictions between encoders and crtcs are exposed to userspace through the
+ * possible_clones and possible_crtcs bitmasks.
+ *
+ * Returns:
+ * Zero on success, negative errno on failure.
+ */
+int drm_connector_attach_encoder(struct drm_connector *connector,
+				 struct drm_encoder *encoder)
+{
+	/*
+	 * In the past, drivers have attempted to model the static association
+	 * of connector to encoder in simple connector/encoder devices using a
+	 * direct assignment of connector->encoder = encoder. This connection
+	 * is a logical one and the responsibility of the core, so drivers are
+	 * expected not to mess with this.
+	 *
+	 * Note that the error return should've been enough here, but a large
+	 * majority of drivers ignores the return value, so add in a big WARN
+	 * to get people's attention.
+	 */
+	if (WARN_ON(connector->encoder))
+		return -EINVAL;
+
+	connector->possible_encoders |= drm_encoder_mask(encoder);
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_connector_attach_encoder);
+
+/**
+ * drm_connector_has_possible_encoder - check if the connector and encoder are
+ * associated with each other
+ * @connector: the connector
+ * @encoder: the encoder
+ *
+ * Returns:
+ * True if @encoder is one of the possible encoders for @connector.
+ */
+bool drm_connector_has_possible_encoder(struct drm_connector *connector,
+					struct drm_encoder *encoder)
+{
+	return connector->possible_encoders & drm_encoder_mask(encoder);
+}
+EXPORT_SYMBOL(drm_connector_has_possible_encoder);
+
+static void drm_mode_remove(struct drm_connector *connector,
+			    struct drm_display_mode *mode)
+{
+	list_del(&mode->head);
+	drm_mode_destroy(connector->dev, mode);
+}
+
+/**
+ * drm_connector_cleanup - cleans up an initialised connector
+ * @connector: connector to cleanup
+ *
+ * Cleans up the connector but doesn't free the object.
+ */
+void drm_connector_cleanup(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_display_mode *mode, *t;
+
+	/* The connector should have been removed from userspace long before
+	 * it is finally destroyed.
+	 */
+	if (WARN_ON(connector->registration_state ==
+		    DRM_CONNECTOR_REGISTERED))
+		drm_connector_unregister(connector);
+
+	if (connector->tile_group) {
+		drm_mode_put_tile_group(dev, connector->tile_group);
+		connector->tile_group = NULL;
+	}
+
+	list_for_each_entry_safe(mode, t, &connector->probed_modes, head)
+		drm_mode_remove(connector, mode);
+
+	list_for_each_entry_safe(mode, t, &connector->modes, head)
+		drm_mode_remove(connector, mode);
+
+	ida_simple_remove(&drm_connector_enum_list[connector->connector_type].ida,
+			  connector->connector_type_id);
+
+	ida_simple_remove(&dev->mode_config.connector_ida,
+			  connector->index);
+
+	kfree(connector->display_info.bus_formats);
+	drm_mode_object_unregister(dev, &connector->base);
+	kfree(connector->name);
+	connector->name = NULL;
+	fwnode_handle_put(connector->fwnode);
+	connector->fwnode = NULL;
+	spin_lock_irq(&dev->mode_config.connector_list_lock);
+	list_del(&connector->head);
+	dev->mode_config.num_connector--;
+	spin_unlock_irq(&dev->mode_config.connector_list_lock);
+
+	WARN_ON(connector->state && !connector->funcs->atomic_destroy_state);
+	if (connector->state && connector->funcs->atomic_destroy_state)
+		connector->funcs->atomic_destroy_state(connector,
+						       connector->state);
+
+	mutex_destroy(&connector->mutex);
+
+	memset(connector, 0, sizeof(*connector));
+
+	if (dev->registered)
+		drm_sysfs_hotplug_event(dev);
+}
+EXPORT_SYMBOL(drm_connector_cleanup);
+
+/**
+ * drm_connector_register - register a connector
+ * @connector: the connector to register
+ *
+ * Register userspace interfaces for a connector. Only call this for connectors
+ * which can be hotplugged after drm_dev_register() has been called already,
+ * e.g. DP MST connectors. All other connectors will be registered automatically
+ * when calling drm_dev_register().
+ *
+ * Returns:
+ * Zero on success, error code on failure.
+ */
+int drm_connector_register(struct drm_connector *connector)
+{
+	int ret = 0;
+
+	if (!connector->dev->registered)
+		return 0;
+
+	mutex_lock(&connector->mutex);
+	if (connector->registration_state != DRM_CONNECTOR_INITIALIZING)
+		goto unlock;
+
+	ret = drm_sysfs_connector_add(connector);
+	if (ret)
+		goto unlock;
+
+	drm_debugfs_connector_add(connector);
+
+	if (connector->funcs->late_register) {
+		ret = connector->funcs->late_register(connector);
+		if (ret)
+			goto err_debugfs;
+	}
+
+	drm_mode_object_register(connector->dev, &connector->base);
+
+	connector->registration_state = DRM_CONNECTOR_REGISTERED;
+
+	/* Let userspace know we have a new connector */
+	drm_sysfs_hotplug_event(connector->dev);
+
+	mutex_lock(&connector_list_lock);
+	list_add_tail(&connector->global_connector_list_entry, &connector_list);
+	mutex_unlock(&connector_list_lock);
+	goto unlock;
+
+err_debugfs:
+	drm_debugfs_connector_remove(connector);
+	drm_sysfs_connector_remove(connector);
+unlock:
+	mutex_unlock(&connector->mutex);
+	return ret;
+}
+EXPORT_SYMBOL(drm_connector_register);
+
+/**
+ * drm_connector_unregister - unregister a connector
+ * @connector: the connector to unregister
+ *
+ * Unregister userspace interfaces for a connector. Only call this for
+ * connectors which have registered explicitly by calling drm_dev_register(),
+ * since connectors are unregistered automatically when drm_dev_unregister() is
+ * called.
+ */
+void drm_connector_unregister(struct drm_connector *connector)
+{
+	mutex_lock(&connector->mutex);
+	if (connector->registration_state != DRM_CONNECTOR_REGISTERED) {
+		mutex_unlock(&connector->mutex);
+		return;
+	}
+
+	mutex_lock(&connector_list_lock);
+	list_del_init(&connector->global_connector_list_entry);
+	mutex_unlock(&connector_list_lock);
+
+	if (connector->funcs->early_unregister)
+		connector->funcs->early_unregister(connector);
+
+	drm_sysfs_connector_remove(connector);
+	drm_debugfs_connector_remove(connector);
+
+	connector->registration_state = DRM_CONNECTOR_UNREGISTERED;
+	mutex_unlock(&connector->mutex);
+}
+EXPORT_SYMBOL(drm_connector_unregister);
+
+void drm_connector_unregister_all(struct drm_device *dev)
+{
+	struct drm_connector *connector;
+	struct drm_connector_list_iter conn_iter;
+
+	drm_connector_list_iter_begin(dev, &conn_iter);
+	drm_for_each_connector_iter(connector, &conn_iter)
+		drm_connector_unregister(connector);
+	drm_connector_list_iter_end(&conn_iter);
+}
+
+int drm_connector_register_all(struct drm_device *dev)
+{
+	struct drm_connector *connector;
+	struct drm_connector_list_iter conn_iter;
+	int ret = 0;
+
+	drm_connector_list_iter_begin(dev, &conn_iter);
+	drm_for_each_connector_iter(connector, &conn_iter) {
+		ret = drm_connector_register(connector);
+		if (ret)
+			break;
+	}
+	drm_connector_list_iter_end(&conn_iter);
+
+	if (ret)
+		drm_connector_unregister_all(dev);
+	return ret;
+}
+
+/**
+ * drm_get_connector_status_name - return a string for connector status
+ * @status: connector status to compute name of
+ *
+ * In contrast to the other drm_get_*_name functions this one here returns a
+ * const pointer and hence is threadsafe.
+ */
+const char *drm_get_connector_status_name(enum drm_connector_status status)
+{
+	if (status == connector_status_connected)
+		return "connected";
+	else if (status == connector_status_disconnected)
+		return "disconnected";
+	else
+		return "unknown";
+}
+EXPORT_SYMBOL(drm_get_connector_status_name);
+
+/**
+ * drm_get_connector_force_name - return a string for connector force
+ * @force: connector force to get name of
+ *
+ * Returns: const pointer to name.
+ */
+const char *drm_get_connector_force_name(enum drm_connector_force force)
+{
+	switch (force) {
+	case DRM_FORCE_UNSPECIFIED:
+		return "unspecified";
+	case DRM_FORCE_OFF:
+		return "off";
+	case DRM_FORCE_ON:
+		return "on";
+	case DRM_FORCE_ON_DIGITAL:
+		return "digital";
+	default:
+		return "unknown";
+	}
+}
+
+#ifdef CONFIG_LOCKDEP
+static struct lockdep_map connector_list_iter_dep_map = {
+	.name = "drm_connector_list_iter"
+};
+#endif
+
+/**
+ * drm_connector_list_iter_begin - initialize a connector_list iterator
+ * @dev: DRM device
+ * @iter: connector_list iterator
+ *
+ * Sets @iter up to walk the &drm_mode_config.connector_list of @dev. @iter
+ * must always be cleaned up again by calling drm_connector_list_iter_end().
+ * Iteration itself happens using drm_connector_list_iter_next() or
+ * drm_for_each_connector_iter().
+ */
+void drm_connector_list_iter_begin(struct drm_device *dev,
+				   struct drm_connector_list_iter *iter)
+{
+	iter->dev = dev;
+	iter->conn = NULL;
+	lock_acquire_shared_recursive(&connector_list_iter_dep_map, 0, 1, NULL, _RET_IP_);
+}
+EXPORT_SYMBOL(drm_connector_list_iter_begin);
+
+/*
+ * Extra-safe connector put function that works in any context. Should only be
+ * used from the connector_iter functions, where we never really expect to
+ * actually release the connector when dropping our final reference.
+ */
+static void
+__drm_connector_put_safe(struct drm_connector *conn)
+{
+	struct drm_mode_config *config = &conn->dev->mode_config;
+
+	lockdep_assert_held(&config->connector_list_lock);
+
+	if (!refcount_dec_and_test(&conn->base.refcount.refcount))
+		return;
+
+	llist_add(&conn->free_node, &config->connector_free_list);
+	schedule_work(&config->connector_free_work);
+}
+
+/**
+ * drm_connector_list_iter_next - return next connector
+ * @iter: connector_list iterator
+ *
+ * Returns the next connector for @iter, or NULL when the list walk has
+ * completed.
+ */
+struct drm_connector *
+drm_connector_list_iter_next(struct drm_connector_list_iter *iter)
+{
+	struct drm_connector *old_conn = iter->conn;
+	struct drm_mode_config *config = &iter->dev->mode_config;
+	struct list_head *lhead;
+	unsigned long flags;
+
+	spin_lock_irqsave(&config->connector_list_lock, flags);
+	lhead = old_conn ? &old_conn->head : &config->connector_list;
+
+	do {
+		if (lhead->next == &config->connector_list) {
+			iter->conn = NULL;
+			break;
+		}
+
+		lhead = lhead->next;
+		iter->conn = list_entry(lhead, struct drm_connector, head);
+
+		/* loop until it's not a zombie connector */
+	} while (!kref_get_unless_zero(&iter->conn->base.refcount));
+
+	if (old_conn)
+		__drm_connector_put_safe(old_conn);
+	spin_unlock_irqrestore(&config->connector_list_lock, flags);
+
+	return iter->conn;
+}
+EXPORT_SYMBOL(drm_connector_list_iter_next);
+
+/**
+ * drm_connector_list_iter_end - tear down a connector_list iterator
+ * @iter: connector_list iterator
+ *
+ * Tears down @iter and releases any resources (like &drm_connector references)
+ * acquired while walking the list. This must always be called, both when the
+ * iteration completes fully or when it was aborted without walking the entire
+ * list.
+ */
+void drm_connector_list_iter_end(struct drm_connector_list_iter *iter)
+{
+	struct drm_mode_config *config = &iter->dev->mode_config;
+	unsigned long flags;
+
+	iter->dev = NULL;
+	if (iter->conn) {
+		spin_lock_irqsave(&config->connector_list_lock, flags);
+		__drm_connector_put_safe(iter->conn);
+		spin_unlock_irqrestore(&config->connector_list_lock, flags);
+	}
+	lock_release(&connector_list_iter_dep_map, _RET_IP_);
+}
+EXPORT_SYMBOL(drm_connector_list_iter_end);
+
+static const struct drm_prop_enum_list drm_subpixel_enum_list[] = {
+	{ SubPixelUnknown, "Unknown" },
+	{ SubPixelHorizontalRGB, "Horizontal RGB" },
+	{ SubPixelHorizontalBGR, "Horizontal BGR" },
+	{ SubPixelVerticalRGB, "Vertical RGB" },
+	{ SubPixelVerticalBGR, "Vertical BGR" },
+	{ SubPixelNone, "None" },
+};
+
+/**
+ * drm_get_subpixel_order_name - return a string for a given subpixel enum
+ * @order: enum of subpixel_order
+ *
+ * Note you could abuse this and return something out of bounds, but that
+ * would be a caller error.  No unscrubbed user data should make it here.
+ */
+const char *drm_get_subpixel_order_name(enum subpixel_order order)
+{
+	return drm_subpixel_enum_list[order].name;
+}
+EXPORT_SYMBOL(drm_get_subpixel_order_name);
+
+static const struct drm_prop_enum_list drm_dpms_enum_list[] = {
+	{ DRM_MODE_DPMS_ON, "On" },
+	{ DRM_MODE_DPMS_STANDBY, "Standby" },
+	{ DRM_MODE_DPMS_SUSPEND, "Suspend" },
+	{ DRM_MODE_DPMS_OFF, "Off" }
+};
+DRM_ENUM_NAME_FN(drm_get_dpms_name, drm_dpms_enum_list)
+
+static const struct drm_prop_enum_list drm_link_status_enum_list[] = {
+	{ DRM_MODE_LINK_STATUS_GOOD, "Good" },
+	{ DRM_MODE_LINK_STATUS_BAD, "Bad" },
+};
+
+/**
+ * drm_display_info_set_bus_formats - set the supported bus formats
+ * @info: display info to store bus formats in
+ * @formats: array containing the supported bus formats
+ * @num_formats: the number of entries in the fmts array
+ *
+ * Store the supported bus formats in display info structure.
+ * See MEDIA_BUS_FMT_* definitions in include/uapi/linux/media-bus-format.h for
+ * a full list of available formats.
+ */
+int drm_display_info_set_bus_formats(struct drm_display_info *info,
+				     const u32 *formats,
+				     unsigned int num_formats)
+{
+	u32 *fmts = NULL;
+
+	if (!formats && num_formats)
+		return -EINVAL;
+
+	if (formats && num_formats) {
+		fmts = kmemdup(formats, sizeof(*formats) * num_formats,
+			       GFP_KERNEL);
+		if (!fmts)
+			return -ENOMEM;
+	}
+
+	kfree(info->bus_formats);
+	info->bus_formats = fmts;
+	info->num_bus_formats = num_formats;
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_display_info_set_bus_formats);
+
+/* Optional connector properties. */
+static const struct drm_prop_enum_list drm_scaling_mode_enum_list[] = {
+	{ DRM_MODE_SCALE_NONE, "None" },
+	{ DRM_MODE_SCALE_FULLSCREEN, "Full" },
+	{ DRM_MODE_SCALE_CENTER, "Center" },
+	{ DRM_MODE_SCALE_ASPECT, "Full aspect" },
+};
+
+static const struct drm_prop_enum_list drm_aspect_ratio_enum_list[] = {
+	{ DRM_MODE_PICTURE_ASPECT_NONE, "Automatic" },
+	{ DRM_MODE_PICTURE_ASPECT_4_3, "4:3" },
+	{ DRM_MODE_PICTURE_ASPECT_16_9, "16:9" },
+};
+
+static const struct drm_prop_enum_list drm_content_type_enum_list[] = {
+	{ DRM_MODE_CONTENT_TYPE_NO_DATA, "No Data" },
+	{ DRM_MODE_CONTENT_TYPE_GRAPHICS, "Graphics" },
+	{ DRM_MODE_CONTENT_TYPE_PHOTO, "Photo" },
+	{ DRM_MODE_CONTENT_TYPE_CINEMA, "Cinema" },
+	{ DRM_MODE_CONTENT_TYPE_GAME, "Game" },
+};
+
+static const struct drm_prop_enum_list drm_panel_orientation_enum_list[] = {
+	{ DRM_MODE_PANEL_ORIENTATION_NORMAL,	"Normal"	},
+	{ DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP,	"Upside Down"	},
+	{ DRM_MODE_PANEL_ORIENTATION_LEFT_UP,	"Left Side Up"	},
+	{ DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,	"Right Side Up"	},
+};
+
+static const struct drm_prop_enum_list drm_dvi_i_select_enum_list[] = {
+	{ DRM_MODE_SUBCONNECTOR_Automatic, "Automatic" }, /* DVI-I and TV-out */
+	{ DRM_MODE_SUBCONNECTOR_DVID,      "DVI-D"     }, /* DVI-I  */
+	{ DRM_MODE_SUBCONNECTOR_DVIA,      "DVI-A"     }, /* DVI-I  */
+};
+DRM_ENUM_NAME_FN(drm_get_dvi_i_select_name, drm_dvi_i_select_enum_list)
+
+static const struct drm_prop_enum_list drm_dvi_i_subconnector_enum_list[] = {
+	{ DRM_MODE_SUBCONNECTOR_Unknown,   "Unknown"   }, /* DVI-I, TV-out and DP */
+	{ DRM_MODE_SUBCONNECTOR_DVID,      "DVI-D"     }, /* DVI-I  */
+	{ DRM_MODE_SUBCONNECTOR_DVIA,      "DVI-A"     }, /* DVI-I  */
+};
+DRM_ENUM_NAME_FN(drm_get_dvi_i_subconnector_name,
+		 drm_dvi_i_subconnector_enum_list)
+
+static const struct drm_prop_enum_list drm_tv_select_enum_list[] = {
+	{ DRM_MODE_SUBCONNECTOR_Automatic, "Automatic" }, /* DVI-I and TV-out */
+	{ DRM_MODE_SUBCONNECTOR_Composite, "Composite" }, /* TV-out */
+	{ DRM_MODE_SUBCONNECTOR_SVIDEO,    "SVIDEO"    }, /* TV-out */
+	{ DRM_MODE_SUBCONNECTOR_Component, "Component" }, /* TV-out */
+	{ DRM_MODE_SUBCONNECTOR_SCART,     "SCART"     }, /* TV-out */
+};
+DRM_ENUM_NAME_FN(drm_get_tv_select_name, drm_tv_select_enum_list)
+
+static const struct drm_prop_enum_list drm_tv_subconnector_enum_list[] = {
+	{ DRM_MODE_SUBCONNECTOR_Unknown,   "Unknown"   }, /* DVI-I, TV-out and DP */
+	{ DRM_MODE_SUBCONNECTOR_Composite, "Composite" }, /* TV-out */
+	{ DRM_MODE_SUBCONNECTOR_SVIDEO,    "SVIDEO"    }, /* TV-out */
+	{ DRM_MODE_SUBCONNECTOR_Component, "Component" }, /* TV-out */
+	{ DRM_MODE_SUBCONNECTOR_SCART,     "SCART"     }, /* TV-out */
+};
+DRM_ENUM_NAME_FN(drm_get_tv_subconnector_name,
+		 drm_tv_subconnector_enum_list)
+
+static const struct drm_prop_enum_list drm_dp_subconnector_enum_list[] = {
+	{ DRM_MODE_SUBCONNECTOR_Unknown,     "Unknown"   }, /* DVI-I, TV-out and DP */
+	{ DRM_MODE_SUBCONNECTOR_VGA,	     "VGA"       }, /* DP */
+	{ DRM_MODE_SUBCONNECTOR_DVID,	     "DVI-D"     }, /* DP */
+	{ DRM_MODE_SUBCONNECTOR_HDMIA,	     "HDMI"      }, /* DP */
+	{ DRM_MODE_SUBCONNECTOR_DisplayPort, "DP"        }, /* DP */
+	{ DRM_MODE_SUBCONNECTOR_Wireless,    "Wireless"  }, /* DP */
+	{ DRM_MODE_SUBCONNECTOR_Native,	     "Native"    }, /* DP */
+};
+
+DRM_ENUM_NAME_FN(drm_get_dp_subconnector_name,
+		 drm_dp_subconnector_enum_list)
+
+static const struct drm_prop_enum_list hdmi_colorspaces[] = {
+	/* For Default case, driver will set the colorspace */
+	{ DRM_MODE_COLORIMETRY_DEFAULT, "Default" },
+	/* Standard Definition Colorimetry based on CEA 861 */
+	{ DRM_MODE_COLORIMETRY_SMPTE_170M_YCC, "SMPTE_170M_YCC" },
+	{ DRM_MODE_COLORIMETRY_BT709_YCC, "BT709_YCC" },
+	/* Standard Definition Colorimetry based on IEC 61966-2-4 */
+	{ DRM_MODE_COLORIMETRY_XVYCC_601, "XVYCC_601" },
+	/* High Definition Colorimetry based on IEC 61966-2-4 */
+	{ DRM_MODE_COLORIMETRY_XVYCC_709, "XVYCC_709" },
+	/* Colorimetry based on IEC 61966-2-1/Amendment 1 */
+	{ DRM_MODE_COLORIMETRY_SYCC_601, "SYCC_601" },
+	/* Colorimetry based on IEC 61966-2-5 [33] */
+	{ DRM_MODE_COLORIMETRY_OPYCC_601, "opYCC_601" },
+	/* Colorimetry based on IEC 61966-2-5 */
+	{ DRM_MODE_COLORIMETRY_OPRGB, "opRGB" },
+	/* Colorimetry based on ITU-R BT.2020 */
+	{ DRM_MODE_COLORIMETRY_BT2020_CYCC, "BT2020_CYCC" },
+	/* Colorimetry based on ITU-R BT.2020 */
+	{ DRM_MODE_COLORIMETRY_BT2020_RGB, "BT2020_RGB" },
+	/* Colorimetry based on ITU-R BT.2020 */
+	{ DRM_MODE_COLORIMETRY_BT2020_YCC, "BT2020_YCC" },
+	/* Added as part of Additional Colorimetry Extension in 861.G */
+	{ DRM_MODE_COLORIMETRY_DCI_P3_RGB_D65, "DCI-P3_RGB_D65" },
+	{ DRM_MODE_COLORIMETRY_DCI_P3_RGB_THEATER, "DCI-P3_RGB_Theater" },
+};
+
+/*
+ * As per DP 1.4a spec, 2.2.5.7.5 VSC SDP Payload for Pixel Encoding/Colorimetry
+ * Format Table 2-120
+ */
+static const struct drm_prop_enum_list dp_colorspaces[] = {
+	/* For Default case, driver will set the colorspace */
+	{ DRM_MODE_COLORIMETRY_DEFAULT, "Default" },
+	{ DRM_MODE_COLORIMETRY_RGB_WIDE_FIXED, "RGB_Wide_Gamut_Fixed_Point" },
+	/* Colorimetry based on scRGB (IEC 61966-2-2) */
+	{ DRM_MODE_COLORIMETRY_RGB_WIDE_FLOAT, "RGB_Wide_Gamut_Floating_Point" },
+	/* Colorimetry based on IEC 61966-2-5 */
+	{ DRM_MODE_COLORIMETRY_OPRGB, "opRGB" },
+	/* Colorimetry based on SMPTE RP 431-2 */
+	{ DRM_MODE_COLORIMETRY_DCI_P3_RGB_D65, "DCI-P3_RGB_D65" },
+	/* Colorimetry based on ITU-R BT.2020 */
+	{ DRM_MODE_COLORIMETRY_BT2020_RGB, "BT2020_RGB" },
+	{ DRM_MODE_COLORIMETRY_BT601_YCC, "BT601_YCC" },
+	{ DRM_MODE_COLORIMETRY_BT709_YCC, "BT709_YCC" },
+	/* Standard Definition Colorimetry based on IEC 61966-2-4 */
+	{ DRM_MODE_COLORIMETRY_XVYCC_601, "XVYCC_601" },
+	/* High Definition Colorimetry based on IEC 61966-2-4 */
+	{ DRM_MODE_COLORIMETRY_XVYCC_709, "XVYCC_709" },
+	/* Colorimetry based on IEC 61966-2-1/Amendment 1 */
+	{ DRM_MODE_COLORIMETRY_SYCC_601, "SYCC_601" },
+	/* Colorimetry based on IEC 61966-2-5 [33] */
+	{ DRM_MODE_COLORIMETRY_OPYCC_601, "opYCC_601" },
+	/* Colorimetry based on ITU-R BT.2020 */
+	{ DRM_MODE_COLORIMETRY_BT2020_CYCC, "BT2020_CYCC" },
+	/* Colorimetry based on ITU-R BT.2020 */
+	{ DRM_MODE_COLORIMETRY_BT2020_YCC, "BT2020_YCC" },
+};
+
+/**
+ * DOC: standard connector properties
+ *
+ * DRM connectors have a few standardized properties:
+ *
+ * EDID:
+ * 	Blob property which contains the current EDID read from the sink. This
+ * 	is useful to parse sink identification information like vendor, model
+ * 	and serial. Drivers should update this property by calling
+ * 	drm_connector_update_edid_property(), usually after having parsed
+ * 	the EDID using drm_add_edid_modes(). Userspace cannot change this
+ * 	property.
+ * DPMS:
+ * 	Legacy property for setting the power state of the connector. For atomic
+ * 	drivers this is only provided for backwards compatibility with existing
+ * 	drivers, it remaps to controlling the "ACTIVE" property on the CRTC the
+ * 	connector is linked to. Drivers should never set this property directly,
+ * 	it is handled by the DRM core by calling the &drm_connector_funcs.dpms
+ * 	callback. For atomic drivers the remapping to the "ACTIVE" property is
+ * 	implemented in the DRM core.
+ *
+ * 	Note that this property cannot be set through the MODE_ATOMIC ioctl,
+ * 	userspace must use "ACTIVE" on the CRTC instead.
+ *
+ * 	WARNING:
+ *
+ * 	For userspace also running on legacy drivers the "DPMS" semantics are a
+ * 	lot more complicated. First, userspace cannot rely on the "DPMS" value
+ * 	returned by the GETCONNECTOR actually reflecting reality, because many
+ * 	drivers fail to update it. For atomic drivers this is taken care of in
+ * 	drm_atomic_helper_update_legacy_modeset_state().
+ *
+ * 	The second issue is that the DPMS state is only well-defined when the
+ * 	connector is connected to a CRTC. In atomic the DRM core enforces that
+ * 	"ACTIVE" is off in such a case, no such checks exists for "DPMS".
+ *
+ * 	Finally, when enabling an output using the legacy SETCONFIG ioctl then
+ * 	"DPMS" is forced to ON. But see above, that might not be reflected in
+ * 	the software value on legacy drivers.
+ *
+ * 	Summarizing: Only set "DPMS" when the connector is known to be enabled,
+ * 	assume that a successful SETCONFIG call also sets "DPMS" to on, and
+ * 	never read back the value of "DPMS" because it can be incorrect.
+ * PATH:
+ * 	Connector path property to identify how this sink is physically
+ * 	connected. Used by DP MST. This should be set by calling
+ * 	drm_connector_set_path_property(), in the case of DP MST with the
+ * 	path property the MST manager created. Userspace cannot change this
+ * 	property.
+ * TILE:
+ * 	Connector tile group property to indicate how a set of DRM connector
+ * 	compose together into one logical screen. This is used by both high-res
+ * 	external screens (often only using a single cable, but exposing multiple
+ * 	DP MST sinks), or high-res integrated panels (like dual-link DSI) which
+ * 	are not gen-locked. Note that for tiled panels which are genlocked, like
+ * 	dual-link LVDS or dual-link DSI, the driver should try to not expose the
+ * 	tiling and virtualise both &drm_crtc and &drm_plane if needed. Drivers
+ * 	should update this value using drm_connector_set_tile_property().
+ * 	Userspace cannot change this property.
+ * link-status:
+ *      Connector link-status property to indicate the status of link. The
+ *      default value of link-status is "GOOD". If something fails during or
+ *      after modeset, the kernel driver may set this to "BAD" and issue a
+ *      hotplug uevent. Drivers should update this value using
+ *      drm_connector_set_link_status_property().
+ *
+ *      When user-space receives the hotplug uevent and detects a "BAD"
+ *      link-status, the sink doesn't receive pixels anymore (e.g. the screen
+ *      becomes completely black). The list of available modes may have
+ *      changed. User-space is expected to pick a new mode if the current one
+ *      has disappeared and perform a new modeset with link-status set to
+ *      "GOOD" to re-enable the connector.
+ *
+ *      If multiple connectors share the same CRTC and one of them gets a "BAD"
+ *      link-status, the other are unaffected (ie. the sinks still continue to
+ *      receive pixels).
+ *
+ *      When user-space performs an atomic commit on a connector with a "BAD"
+ *      link-status without resetting the property to "GOOD", the sink may
+ *      still not receive pixels. When user-space performs an atomic commit
+ *      which resets the link-status property to "GOOD" without the
+ *      ALLOW_MODESET flag set, it might fail because a modeset is required.
+ *
+ *      User-space can only change link-status to "GOOD", changing it to "BAD"
+ *      is a no-op.
+ *
+ *      For backwards compatibility with non-atomic userspace the kernel
+ *      tries to automatically set the link-status back to "GOOD" in the
+ *      SETCRTC IOCTL. This might fail if the mode is no longer valid, similar
+ *      to how it might fail if a different screen has been connected in the
+ *      interim.
+ * non_desktop:
+ * 	Indicates the output should be ignored for purposes of displaying a
+ * 	standard desktop environment or console. This is most likely because
+ * 	the output device is not rectilinear.
+ * Content Protection:
+ *	This property is used by userspace to request the kernel protect future
+ *	content communicated over the link. When requested, kernel will apply
+ *	the appropriate means of protection (most often HDCP), and use the
+ *	property to tell userspace the protection is active.
+ *
+ *	Drivers can set this up by calling
+ *	drm_connector_attach_content_protection_property() on initialization.
+ *
+ *	The value of this property can be one of the following:
+ *
+ *	DRM_MODE_CONTENT_PROTECTION_UNDESIRED = 0
+ *		The link is not protected, content is transmitted in the clear.
+ *	DRM_MODE_CONTENT_PROTECTION_DESIRED = 1
+ *		Userspace has requested content protection, but the link is not
+ *		currently protected. When in this state, kernel should enable
+ *		Content Protection as soon as possible.
+ *	DRM_MODE_CONTENT_PROTECTION_ENABLED = 2
+ *		Userspace has requested content protection, and the link is
+ *		protected. Only the driver can set the property to this value.
+ *		If userspace attempts to set to ENABLED, kernel will return
+ *		-EINVAL.
+ *
+ *	A few guidelines:
+ *
+ *	- DESIRED state should be preserved until userspace de-asserts it by
+ *	  setting the property to UNDESIRED. This means ENABLED should only
+ *	  transition to UNDESIRED when the user explicitly requests it.
+ *	- If the state is DESIRED, kernel should attempt to re-authenticate the
+ *	  link whenever possible. This includes across disable/enable, dpms,
+ *	  hotplug, downstream device changes, link status failures, etc..
+ *	- Kernel sends uevent with the connector id and property id through
+ *	  @drm_hdcp_update_content_protection, upon below kernel triggered
+ *	  scenarios:
+ *
+ *		- DESIRED -> ENABLED (authentication success)
+ *		- ENABLED -> DESIRED (termination of authentication)
+ *	- Please note no uevents for userspace triggered property state changes,
+ *	  which can't fail such as
+ *
+ *		- DESIRED/ENABLED -> UNDESIRED
+ *		- UNDESIRED -> DESIRED
+ *	- Userspace is responsible for polling the property or listen to uevents
+ *	  to determine when the value transitions from ENABLED to DESIRED.
+ *	  This signifies the link is no longer protected and userspace should
+ *	  take appropriate action (whatever that might be).
+ *
+ * HDCP Content Type:
+ *	This Enum property is used by the userspace to declare the content type
+ *	of the display stream, to kernel. Here display stream stands for any
+ *	display content that userspace intended to display through HDCP
+ *	encryption.
+ *
+ *	Content Type of a stream is decided by the owner of the stream, as
+ *	"HDCP Type0" or "HDCP Type1".
+ *
+ *	The value of the property can be one of the below:
+ *	  - "HDCP Type0": DRM_MODE_HDCP_CONTENT_TYPE0 = 0
+ *	  - "HDCP Type1": DRM_MODE_HDCP_CONTENT_TYPE1 = 1
+ *
+ *	When kernel starts the HDCP authentication (see "Content Protection"
+ *	for details), it uses the content type in "HDCP Content Type"
+ *	for performing the HDCP authentication with the display sink.
+ *
+ *	Please note in HDCP spec versions, a link can be authenticated with
+ *	HDCP 2.2 for Content Type 0/Content Type 1. Where as a link can be
+ *	authenticated with HDCP1.4 only for Content Type 0(though it is implicit
+ *	in nature. As there is no reference for Content Type in HDCP1.4).
+ *
+ *	HDCP2.2 authentication protocol itself takes the "Content Type" as a
+ *	parameter, which is a input for the DP HDCP2.2 encryption algo.
+ *
+ *	In case of Type 0 content protection request, kernel driver can choose
+ *	either of HDCP spec versions 1.4 and 2.2. When HDCP2.2 is used for
+ *	"HDCP Type 0", a HDCP 2.2 capable repeater in the downstream can send
+ *	that content to a HDCP 1.4 authenticated HDCP sink (Type0 link).
+ *	But if the content is classified as "HDCP Type 1", above mentioned
+ *	HDCP 2.2 repeater wont send the content to the HDCP sink as it can't
+ *	authenticate the HDCP1.4 capable sink for "HDCP Type 1".
+ *
+ *	Please note userspace can be ignorant of the HDCP versions used by the
+ *	kernel driver to achieve the "HDCP Content Type".
+ *
+ *	At current scenario, classifying a content as Type 1 ensures that the
+ *	content will be displayed only through the HDCP2.2 encrypted link.
+ *
+ *	Note that the HDCP Content Type property is introduced at HDCP 2.2, and
+ *	defaults to type 0. It is only exposed by drivers supporting HDCP 2.2
+ *	(hence supporting Type 0 and Type 1). Based on how next versions of
+ *	HDCP specs are defined content Type could be used for higher versions
+ *	too.
+ *
+ *	If content type is changed when "Content Protection" is not UNDESIRED,
+ *	then kernel will disable the HDCP and re-enable with new type in the
+ *	same atomic commit. And when "Content Protection" is ENABLED, it means
+ *	that link is HDCP authenticated and encrypted, for the transmission of
+ *	the Type of stream mentioned at "HDCP Content Type".
+ *
+ * HDR_OUTPUT_METADATA:
+ *	Connector property to enable userspace to send HDR Metadata to
+ *	driver. This metadata is based on the composition and blending
+ *	policies decided by user, taking into account the hardware and
+ *	sink capabilities. The driver gets this metadata and creates a
+ *	Dynamic Range and Mastering Infoframe (DRM) in case of HDMI,
+ *	SDP packet (Non-audio INFOFRAME SDP v1.3) for DP. This is then
+ *	sent to sink. This notifies the sink of the upcoming frame's Color
+ *	Encoding and Luminance parameters.
+ *
+ *	Userspace first need to detect the HDR capabilities of sink by
+ *	reading and parsing the EDID. Details of HDR metadata for HDMI
+ *	are added in CTA 861.G spec. For DP , its defined in VESA DP
+ *	Standard v1.4. It needs to then get the metadata information
+ *	of the video/game/app content which are encoded in HDR (basically
+ *	using HDR transfer functions). With this information it needs to
+ *	decide on a blending policy and compose the relevant
+ *	layers/overlays into a common format. Once this blending is done,
+ *	userspace will be aware of the metadata of the composed frame to
+ *	be send to sink. It then uses this property to communicate this
+ *	metadata to driver which then make a Infoframe packet and sends
+ *	to sink based on the type of encoder connected.
+ *
+ *	Userspace will be responsible to do Tone mapping operation in case:
+ *		- Some layers are HDR and others are SDR
+ *		- HDR layers luminance is not same as sink
+ *
+ *	It will even need to do colorspace conversion and get all layers
+ *	to one common colorspace for blending. It can use either GL, Media
+ *	or display engine to get this done based on the capabilities of the
+ *	associated hardware.
+ *
+ *	Driver expects metadata to be put in &struct hdr_output_metadata
+ *	structure from userspace. This is received as blob and stored in
+ *	&drm_connector_state.hdr_output_metadata. It parses EDID and saves the
+ *	sink metadata in &struct hdr_sink_metadata, as
+ *	&drm_connector.hdr_sink_metadata.  Driver uses
+ *	drm_hdmi_infoframe_set_hdr_metadata() helper to set the HDR metadata,
+ *	hdmi_drm_infoframe_pack() to pack the infoframe as per spec, in case of
+ *	HDMI encoder.
+ *
+ * max bpc:
+ *	This range property is used by userspace to limit the bit depth. When
+ *	used the driver would limit the bpc in accordance with the valid range
+ *	supported by the hardware and sink. Drivers to use the function
+ *	drm_connector_attach_max_bpc_property() to create and attach the
+ *	property to the connector during initialization.
+ *
+ * Connectors also have one standardized atomic property:
+ *
+ * CRTC_ID:
+ * 	Mode object ID of the &drm_crtc this connector should be connected to.
+ *
+ * Connectors for LCD panels may also have one standardized property:
+ *
+ * panel orientation:
+ *	On some devices the LCD panel is mounted in the casing in such a way
+ *	that the up/top side of the panel does not match with the top side of
+ *	the device. Userspace can use this property to check for this.
+ *	Note that input coordinates from touchscreens (input devices with
+ *	INPUT_PROP_DIRECT) will still map 1:1 to the actual LCD panel
+ *	coordinates, so if userspace rotates the picture to adjust for
+ *	the orientation it must also apply the same transformation to the
+ *	touchscreen input coordinates. This property is initialized by calling
+ *	drm_connector_set_panel_orientation() or
+ *	drm_connector_set_panel_orientation_with_quirk()
+ *
+ * scaling mode:
+ *	This property defines how a non-native mode is upscaled to the native
+ *	mode of an LCD panel:
+ *
+ *	None:
+ *		No upscaling happens, scaling is left to the panel. Not all
+ *		drivers expose this mode.
+ *	Full:
+ *		The output is upscaled to the full resolution of the panel,
+ *		ignoring the aspect ratio.
+ *	Center:
+ *		No upscaling happens, the output is centered within the native
+ *		resolution the panel.
+ *	Full aspect:
+ *		The output is upscaled to maximize either the width or height
+ *		while retaining the aspect ratio.
+ *
+ *	This property should be set up by calling
+ *	drm_connector_attach_scaling_mode_property(). Note that drivers
+ *	can also expose this property to external outputs, in which case they
+ *	must support "None", which should be the default (since external screens
+ *	have a built-in scaler).
+ *
+ * subconnector:
+ *	This property is used by DVI-I, TVout and DisplayPort to indicate different
+ *	connector subtypes. Enum values more or less match with those from main
+ *	connector types.
+ *	For DVI-I and TVout there is also a matching property "select subconnector"
+ *	allowing to switch between signal types.
+ *	DP subconnector corresponds to a downstream port.
+ */
+
+int drm_connector_create_standard_properties(struct drm_device *dev)
+{
+	struct drm_property *prop;
+
+	prop = drm_property_create(dev, DRM_MODE_PROP_BLOB |
+				   DRM_MODE_PROP_IMMUTABLE,
+				   "EDID", 0);
+	if (!prop)
+		return -ENOMEM;
+	dev->mode_config.edid_property = prop;
+
+	prop = drm_property_create_enum(dev, 0,
+				   "DPMS", drm_dpms_enum_list,
+				   ARRAY_SIZE(drm_dpms_enum_list));
+	if (!prop)
+		return -ENOMEM;
+	dev->mode_config.dpms_property = prop;
+
+	prop = drm_property_create(dev,
+				   DRM_MODE_PROP_BLOB |
+				   DRM_MODE_PROP_IMMUTABLE,
+				   "PATH", 0);
+	if (!prop)
+		return -ENOMEM;
+	dev->mode_config.path_property = prop;
+
+	prop = drm_property_create(dev,
+				   DRM_MODE_PROP_BLOB |
+				   DRM_MODE_PROP_IMMUTABLE,
+				   "TILE", 0);
+	if (!prop)
+		return -ENOMEM;
+	dev->mode_config.tile_property = prop;
+
+	prop = drm_property_create_enum(dev, 0, "link-status",
+					drm_link_status_enum_list,
+					ARRAY_SIZE(drm_link_status_enum_list));
+	if (!prop)
+		return -ENOMEM;
+	dev->mode_config.link_status_property = prop;
+
+	prop = drm_property_create_bool(dev, DRM_MODE_PROP_IMMUTABLE, "non-desktop");
+	if (!prop)
+		return -ENOMEM;
+	dev->mode_config.non_desktop_property = prop;
+
+	prop = drm_property_create(dev, DRM_MODE_PROP_BLOB,
+				   "HDR_OUTPUT_METADATA", 0);
+	if (!prop)
+		return -ENOMEM;
+	dev->mode_config.hdr_output_metadata_property = prop;
+
+	return 0;
+}
+
+/**
+ * drm_mode_create_dvi_i_properties - create DVI-I specific connector properties
+ * @dev: DRM device
+ *
+ * Called by a driver the first time a DVI-I connector is made.
+ */
+int drm_mode_create_dvi_i_properties(struct drm_device *dev)
+{
+	struct drm_property *dvi_i_selector;
+	struct drm_property *dvi_i_subconnector;
+
+	if (dev->mode_config.dvi_i_select_subconnector_property)
+		return 0;
+
+	dvi_i_selector =
+		drm_property_create_enum(dev, 0,
+				    "select subconnector",
+				    drm_dvi_i_select_enum_list,
+				    ARRAY_SIZE(drm_dvi_i_select_enum_list));
+	dev->mode_config.dvi_i_select_subconnector_property = dvi_i_selector;
+
+	dvi_i_subconnector = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
+				    "subconnector",
+				    drm_dvi_i_subconnector_enum_list,
+				    ARRAY_SIZE(drm_dvi_i_subconnector_enum_list));
+	dev->mode_config.dvi_i_subconnector_property = dvi_i_subconnector;
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_mode_create_dvi_i_properties);
+
+/**
+ * drm_connector_attach_dp_subconnector_property - create subconnector property for DP
+ * @connector: drm_connector to attach property
+ *
+ * Called by a driver when DP connector is created.
+ */
+void drm_connector_attach_dp_subconnector_property(struct drm_connector *connector)
+{
+	struct drm_mode_config *mode_config = &connector->dev->mode_config;
+
+	if (!mode_config->dp_subconnector_property)
+		mode_config->dp_subconnector_property =
+			drm_property_create_enum(connector->dev,
+				DRM_MODE_PROP_IMMUTABLE,
+				"subconnector",
+				drm_dp_subconnector_enum_list,
+				ARRAY_SIZE(drm_dp_subconnector_enum_list));
+
+	drm_object_attach_property(&connector->base,
+				   mode_config->dp_subconnector_property,
+				   DRM_MODE_SUBCONNECTOR_Unknown);
+}
+EXPORT_SYMBOL(drm_connector_attach_dp_subconnector_property);
+
+/**
+ * DOC: HDMI connector properties
+ *
+ * content type (HDMI specific):
+ *	Indicates content type setting to be used in HDMI infoframes to indicate
+ *	content type for the external device, so that it adjusts its display
+ *	settings accordingly.
+ *
+ *	The value of this property can be one of the following:
+ *
+ *	No Data:
+ *		Content type is unknown
+ *	Graphics:
+ *		Content type is graphics
+ *	Photo:
+ *		Content type is photo
+ *	Cinema:
+ *		Content type is cinema
+ *	Game:
+ *		Content type is game
+ *
+ *	Drivers can set up this property by calling
+ *	drm_connector_attach_content_type_property(). Decoding to
+ *	infoframe values is done through drm_hdmi_avi_infoframe_content_type().
+ */
+
+/**
+ * drm_connector_attach_content_type_property - attach content-type property
+ * @connector: connector to attach content type property on.
+ *
+ * Called by a driver the first time a HDMI connector is made.
+ */
+int drm_connector_attach_content_type_property(struct drm_connector *connector)
+{
+	if (!drm_mode_create_content_type_property(connector->dev))
+		drm_object_attach_property(&connector->base,
+					   connector->dev->mode_config.content_type_property,
+					   DRM_MODE_CONTENT_TYPE_NO_DATA);
+	return 0;
+}
+EXPORT_SYMBOL(drm_connector_attach_content_type_property);
+
+
+/**
+ * drm_hdmi_avi_infoframe_content_type() - fill the HDMI AVI infoframe
+ *                                         content type information, based
+ *                                         on correspondent DRM property.
+ * @frame: HDMI AVI infoframe
+ * @conn_state: DRM display connector state
+ *
+ */
+void drm_hdmi_avi_infoframe_content_type(struct hdmi_avi_infoframe *frame,
+					 const struct drm_connector_state *conn_state)
+{
+	switch (conn_state->content_type) {
+	case DRM_MODE_CONTENT_TYPE_GRAPHICS:
+		frame->content_type = HDMI_CONTENT_TYPE_GRAPHICS;
+		break;
+	case DRM_MODE_CONTENT_TYPE_CINEMA:
+		frame->content_type = HDMI_CONTENT_TYPE_CINEMA;
+		break;
+	case DRM_MODE_CONTENT_TYPE_GAME:
+		frame->content_type = HDMI_CONTENT_TYPE_GAME;
+		break;
+	case DRM_MODE_CONTENT_TYPE_PHOTO:
+		frame->content_type = HDMI_CONTENT_TYPE_PHOTO;
+		break;
+	default:
+		/* Graphics is the default(0) */
+		frame->content_type = HDMI_CONTENT_TYPE_GRAPHICS;
+	}
+
+	frame->itc = conn_state->content_type != DRM_MODE_CONTENT_TYPE_NO_DATA;
+}
+EXPORT_SYMBOL(drm_hdmi_avi_infoframe_content_type);
+
+/**
+ * drm_mode_attach_tv_margin_properties - attach TV connector margin properties
+ * @connector: DRM connector
+ *
+ * Called by a driver when it needs to attach TV margin props to a connector.
+ * Typically used on SDTV and HDMI connectors.
+ */
+void drm_connector_attach_tv_margin_properties(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+
+	drm_object_attach_property(&connector->base,
+				   dev->mode_config.tv_left_margin_property,
+				   0);
+	drm_object_attach_property(&connector->base,
+				   dev->mode_config.tv_right_margin_property,
+				   0);
+	drm_object_attach_property(&connector->base,
+				   dev->mode_config.tv_top_margin_property,
+				   0);
+	drm_object_attach_property(&connector->base,
+				   dev->mode_config.tv_bottom_margin_property,
+				   0);
+}
+EXPORT_SYMBOL(drm_connector_attach_tv_margin_properties);
+
+/**
+ * drm_mode_create_tv_margin_properties - create TV connector margin properties
+ * @dev: DRM device
+ *
+ * Called by a driver's HDMI connector initialization routine, this function
+ * creates the TV margin properties for a given device. No need to call this
+ * function for an SDTV connector, it's already called from
+ * drm_mode_create_tv_properties().
+ */
+int drm_mode_create_tv_margin_properties(struct drm_device *dev)
+{
+	if (dev->mode_config.tv_left_margin_property)
+		return 0;
+
+	dev->mode_config.tv_left_margin_property =
+		drm_property_create_range(dev, 0, "left margin", 0, 100);
+	if (!dev->mode_config.tv_left_margin_property)
+		return -ENOMEM;
+
+	dev->mode_config.tv_right_margin_property =
+		drm_property_create_range(dev, 0, "right margin", 0, 100);
+	if (!dev->mode_config.tv_right_margin_property)
+		return -ENOMEM;
+
+	dev->mode_config.tv_top_margin_property =
+		drm_property_create_range(dev, 0, "top margin", 0, 100);
+	if (!dev->mode_config.tv_top_margin_property)
+		return -ENOMEM;
+
+	dev->mode_config.tv_bottom_margin_property =
+		drm_property_create_range(dev, 0, "bottom margin", 0, 100);
+	if (!dev->mode_config.tv_bottom_margin_property)
+		return -ENOMEM;
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_mode_create_tv_margin_properties);
+
+/**
+ * drm_mode_create_tv_properties - create TV specific connector properties
+ * @dev: DRM device
+ * @num_modes: number of different TV formats (modes) supported
+ * @modes: array of pointers to strings containing name of each format
+ *
+ * Called by a driver's TV initialization routine, this function creates
+ * the TV specific connector properties for a given device.  Caller is
+ * responsible for allocating a list of format names and passing them to
+ * this routine.
+ */
+int drm_mode_create_tv_properties(struct drm_device *dev,
+				  unsigned int num_modes,
+				  const char * const modes[])
+{
+	struct drm_property *tv_selector;
+	struct drm_property *tv_subconnector;
+	unsigned int i;
+
+	if (dev->mode_config.tv_select_subconnector_property)
+		return 0;
+
+	/*
+	 * Basic connector properties
+	 */
+	tv_selector = drm_property_create_enum(dev, 0,
+					  "select subconnector",
+					  drm_tv_select_enum_list,
+					  ARRAY_SIZE(drm_tv_select_enum_list));
+	if (!tv_selector)
+		goto nomem;
+
+	dev->mode_config.tv_select_subconnector_property = tv_selector;
+
+	tv_subconnector =
+		drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
+				    "subconnector",
+				    drm_tv_subconnector_enum_list,
+				    ARRAY_SIZE(drm_tv_subconnector_enum_list));
+	if (!tv_subconnector)
+		goto nomem;
+	dev->mode_config.tv_subconnector_property = tv_subconnector;
+
+	/*
+	 * Other, TV specific properties: margins & TV modes.
+	 */
+	if (drm_mode_create_tv_margin_properties(dev))
+		goto nomem;
+
+	dev->mode_config.tv_mode_property =
+		drm_property_create(dev, DRM_MODE_PROP_ENUM,
+				    "mode", num_modes);
+	if (!dev->mode_config.tv_mode_property)
+		goto nomem;
+
+	for (i = 0; i < num_modes; i++)
+		drm_property_add_enum(dev->mode_config.tv_mode_property,
+				      i, modes[i]);
+
+	dev->mode_config.tv_brightness_property =
+		drm_property_create_range(dev, 0, "brightness", 0, 100);
+	if (!dev->mode_config.tv_brightness_property)
+		goto nomem;
+
+	dev->mode_config.tv_contrast_property =
+		drm_property_create_range(dev, 0, "contrast", 0, 100);
+	if (!dev->mode_config.tv_contrast_property)
+		goto nomem;
+
+	dev->mode_config.tv_flicker_reduction_property =
+		drm_property_create_range(dev, 0, "flicker reduction", 0, 100);
+	if (!dev->mode_config.tv_flicker_reduction_property)
+		goto nomem;
+
+	dev->mode_config.tv_overscan_property =
+		drm_property_create_range(dev, 0, "overscan", 0, 100);
+	if (!dev->mode_config.tv_overscan_property)
+		goto nomem;
+
+	dev->mode_config.tv_saturation_property =
+		drm_property_create_range(dev, 0, "saturation", 0, 100);
+	if (!dev->mode_config.tv_saturation_property)
+		goto nomem;
+
+	dev->mode_config.tv_hue_property =
+		drm_property_create_range(dev, 0, "hue", 0, 100);
+	if (!dev->mode_config.tv_hue_property)
+		goto nomem;
+
+	return 0;
+nomem:
+	return -ENOMEM;
+}
+EXPORT_SYMBOL(drm_mode_create_tv_properties);
+
+/**
+ * drm_mode_create_scaling_mode_property - create scaling mode property
+ * @dev: DRM device
+ *
+ * Called by a driver the first time it's needed, must be attached to desired
+ * connectors.
+ *
+ * Atomic drivers should use drm_connector_attach_scaling_mode_property()
+ * instead to correctly assign &drm_connector_state.picture_aspect_ratio
+ * in the atomic state.
+ */
+int drm_mode_create_scaling_mode_property(struct drm_device *dev)
+{
+	struct drm_property *scaling_mode;
+
+	if (dev->mode_config.scaling_mode_property)
+		return 0;
+
+	scaling_mode =
+		drm_property_create_enum(dev, 0, "scaling mode",
+				drm_scaling_mode_enum_list,
+				    ARRAY_SIZE(drm_scaling_mode_enum_list));
+
+	dev->mode_config.scaling_mode_property = scaling_mode;
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_mode_create_scaling_mode_property);
+
+/**
+ * DOC: Variable refresh properties
+ *
+ * Variable refresh rate capable displays can dynamically adjust their
+ * refresh rate by extending the duration of their vertical front porch
+ * until page flip or timeout occurs. This can reduce or remove stuttering
+ * and latency in scenarios where the page flip does not align with the
+ * vblank interval.
+ *
+ * An example scenario would be an application flipping at a constant rate
+ * of 48Hz on a 60Hz display. The page flip will frequently miss the vblank
+ * interval and the same contents will be displayed twice. This can be
+ * observed as stuttering for content with motion.
+ *
+ * If variable refresh rate was active on a display that supported a
+ * variable refresh range from 35Hz to 60Hz no stuttering would be observable
+ * for the example scenario. The minimum supported variable refresh rate of
+ * 35Hz is below the page flip frequency and the vertical front porch can
+ * be extended until the page flip occurs. The vblank interval will be
+ * directly aligned to the page flip rate.
+ *
+ * Not all userspace content is suitable for use with variable refresh rate.
+ * Large and frequent changes in vertical front porch duration may worsen
+ * perceived stuttering for input sensitive applications.
+ *
+ * Panel brightness will also vary with vertical front porch duration. Some
+ * panels may have noticeable differences in brightness between the minimum
+ * vertical front porch duration and the maximum vertical front porch duration.
+ * Large and frequent changes in vertical front porch duration may produce
+ * observable flickering for such panels.
+ *
+ * Userspace control for variable refresh rate is supported via properties
+ * on the &drm_connector and &drm_crtc objects.
+ *
+ * "vrr_capable":
+ *	Optional &drm_connector boolean property that drivers should attach
+ *	with drm_connector_attach_vrr_capable_property() on connectors that
+ *	could support variable refresh rates. Drivers should update the
+ *	property value by calling drm_connector_set_vrr_capable_property().
+ *
+ *	Absence of the property should indicate absence of support.
+ *
+ * "VRR_ENABLED":
+ *	Default &drm_crtc boolean property that notifies the driver that the
+ *	content on the CRTC is suitable for variable refresh rate presentation.
+ *	The driver will take this property as a hint to enable variable
+ *	refresh rate support if the receiver supports it, ie. if the
+ *	"vrr_capable" property is true on the &drm_connector object. The
+ *	vertical front porch duration will be extended until page-flip or
+ *	timeout when enabled.
+ *
+ *	The minimum vertical front porch duration is defined as the vertical
+ *	front porch duration for the current mode.
+ *
+ *	The maximum vertical front porch duration is greater than or equal to
+ *	the minimum vertical front porch duration. The duration is derived
+ *	from the minimum supported variable refresh rate for the connector.
+ *
+ *	The driver may place further restrictions within these minimum
+ *	and maximum bounds.
+ */
+
+/**
+ * drm_connector_attach_vrr_capable_property - creates the
+ * vrr_capable property
+ * @connector: connector to create the vrr_capable property on.
+ *
+ * This is used by atomic drivers to add support for querying
+ * variable refresh rate capability for a connector.
+ *
+ * Returns:
+ * Zero on success, negative errno on failure.
+ */
+int drm_connector_attach_vrr_capable_property(
+	struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_property *prop;
+
+	if (!connector->vrr_capable_property) {
+		prop = drm_property_create_bool(dev, DRM_MODE_PROP_IMMUTABLE,
+			"vrr_capable");
+		if (!prop)
+			return -ENOMEM;
+
+		connector->vrr_capable_property = prop;
+		drm_object_attach_property(&connector->base, prop, 0);
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_connector_attach_vrr_capable_property);
+
+/**
+ * drm_connector_attach_scaling_mode_property - attach atomic scaling mode property
+ * @connector: connector to attach scaling mode property on.
+ * @scaling_mode_mask: or'ed mask of BIT(%DRM_MODE_SCALE_\*).
+ *
+ * This is used to add support for scaling mode to atomic drivers.
+ * The scaling mode will be set to &drm_connector_state.picture_aspect_ratio
+ * and can be used from &drm_connector_helper_funcs->atomic_check for validation.
+ *
+ * This is the atomic version of drm_mode_create_scaling_mode_property().
+ *
+ * Returns:
+ * Zero on success, negative errno on failure.
+ */
+int drm_connector_attach_scaling_mode_property(struct drm_connector *connector,
+					       u32 scaling_mode_mask)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_property *scaling_mode_property;
+	int i;
+	const unsigned valid_scaling_mode_mask =
+		(1U << ARRAY_SIZE(drm_scaling_mode_enum_list)) - 1;
+
+	if (WARN_ON(hweight32(scaling_mode_mask) < 2 ||
+		    scaling_mode_mask & ~valid_scaling_mode_mask))
+		return -EINVAL;
+
+	scaling_mode_property =
+		drm_property_create(dev, DRM_MODE_PROP_ENUM, "scaling mode",
+				    hweight32(scaling_mode_mask));
+
+	if (!scaling_mode_property)
+		return -ENOMEM;
+
+	for (i = 0; i < ARRAY_SIZE(drm_scaling_mode_enum_list); i++) {
+		int ret;
+
+		if (!(BIT(i) & scaling_mode_mask))
+			continue;
+
+		ret = drm_property_add_enum(scaling_mode_property,
+					    drm_scaling_mode_enum_list[i].type,
+					    drm_scaling_mode_enum_list[i].name);
+
+		if (ret) {
+			drm_property_destroy(dev, scaling_mode_property);
+
+			return ret;
+		}
+	}
+
+	drm_object_attach_property(&connector->base,
+				   scaling_mode_property, 0);
+
+	connector->scaling_mode_property = scaling_mode_property;
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_connector_attach_scaling_mode_property);
+
+/**
+ * drm_mode_create_aspect_ratio_property - create aspect ratio property
+ * @dev: DRM device
+ *
+ * Called by a driver the first time it's needed, must be attached to desired
+ * connectors.
+ *
+ * Returns:
+ * Zero on success, negative errno on failure.
+ */
+int drm_mode_create_aspect_ratio_property(struct drm_device *dev)
+{
+	if (dev->mode_config.aspect_ratio_property)
+		return 0;
+
+	dev->mode_config.aspect_ratio_property =
+		drm_property_create_enum(dev, 0, "aspect ratio",
+				drm_aspect_ratio_enum_list,
+				ARRAY_SIZE(drm_aspect_ratio_enum_list));
+
+	if (dev->mode_config.aspect_ratio_property == NULL)
+		return -ENOMEM;
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_mode_create_aspect_ratio_property);
+
+/**
+ * DOC: standard connector properties
+ *
+ * Colorspace:
+ *     This property helps select a suitable colorspace based on the sink
+ *     capability. Modern sink devices support wider gamut like BT2020.
+ *     This helps switch to BT2020 mode if the BT2020 encoded video stream
+ *     is being played by the user, same for any other colorspace. Thereby
+ *     giving a good visual experience to users.
+ *
+ *     The expectation from userspace is that it should parse the EDID
+ *     and get supported colorspaces. Use this property and switch to the
+ *     one supported. Sink supported colorspaces should be retrieved by
+ *     userspace from EDID and driver will not explicitly expose them.
+ *
+ *     Basically the expectation from userspace is:
+ *      - Set up CRTC DEGAMMA/CTM/GAMMA to convert to some sink
+ *        colorspace
+ *      - Set this new property to let the sink know what it
+ *        converted the CRTC output to.
+ *      - This property is just to inform sink what colorspace
+ *        source is trying to drive.
+ *
+ * Because between HDMI and DP have different colorspaces,
+ * drm_mode_create_hdmi_colorspace_property() is used for HDMI connector and
+ * drm_mode_create_dp_colorspace_property() is used for DP connector.
+ */
+
+/**
+ * drm_mode_create_hdmi_colorspace_property - create hdmi colorspace property
+ * @connector: connector to create the Colorspace property on.
+ *
+ * Called by a driver the first time it's needed, must be attached to desired
+ * HDMI connectors.
+ *
+ * Returns:
+ * Zero on success, negative errno on failure.
+ */
+int drm_mode_create_hdmi_colorspace_property(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+
+	if (connector->colorspace_property)
+		return 0;
+
+	connector->colorspace_property =
+		drm_property_create_enum(dev, DRM_MODE_PROP_ENUM, "Colorspace",
+					 hdmi_colorspaces,
+					 ARRAY_SIZE(hdmi_colorspaces));
+
+	if (!connector->colorspace_property)
+		return -ENOMEM;
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_mode_create_hdmi_colorspace_property);
+
+/**
+ * drm_mode_create_dp_colorspace_property - create dp colorspace property
+ * @connector: connector to create the Colorspace property on.
+ *
+ * Called by a driver the first time it's needed, must be attached to desired
+ * DP connectors.
+ *
+ * Returns:
+ * Zero on success, negative errno on failure.
+ */
+int drm_mode_create_dp_colorspace_property(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+
+	if (connector->colorspace_property)
+		return 0;
+
+	connector->colorspace_property =
+		drm_property_create_enum(dev, DRM_MODE_PROP_ENUM, "Colorspace",
+					 dp_colorspaces,
+					 ARRAY_SIZE(dp_colorspaces));
+
+	if (!connector->colorspace_property)
+		return -ENOMEM;
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_mode_create_dp_colorspace_property);
+
+/**
+ * drm_mode_create_content_type_property - create content type property
+ * @dev: DRM device
+ *
+ * Called by a driver the first time it's needed, must be attached to desired
+ * connectors.
+ *
+ * Returns:
+ * Zero on success, negative errno on failure.
+ */
+int drm_mode_create_content_type_property(struct drm_device *dev)
+{
+	if (dev->mode_config.content_type_property)
+		return 0;
+
+	dev->mode_config.content_type_property =
+		drm_property_create_enum(dev, 0, "content type",
+					 drm_content_type_enum_list,
+					 ARRAY_SIZE(drm_content_type_enum_list));
+
+	if (dev->mode_config.content_type_property == NULL)
+		return -ENOMEM;
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_mode_create_content_type_property);
+
+/**
+ * drm_mode_create_suggested_offset_properties - create suggests offset properties
+ * @dev: DRM device
+ *
+ * Create the suggested x/y offset property for connectors.
+ */
+int drm_mode_create_suggested_offset_properties(struct drm_device *dev)
+{
+	if (dev->mode_config.suggested_x_property && dev->mode_config.suggested_y_property)
+		return 0;
+
+	dev->mode_config.suggested_x_property =
+		drm_property_create_range(dev, DRM_MODE_PROP_IMMUTABLE, "suggested X", 0, 0xffffffff);
+
+	dev->mode_config.suggested_y_property =
+		drm_property_create_range(dev, DRM_MODE_PROP_IMMUTABLE, "suggested Y", 0, 0xffffffff);
+
+	if (dev->mode_config.suggested_x_property == NULL ||
+	    dev->mode_config.suggested_y_property == NULL)
+		return -ENOMEM;
+	return 0;
+}
+EXPORT_SYMBOL(drm_mode_create_suggested_offset_properties);
+
+/**
+ * drm_connector_set_path_property - set tile property on connector
+ * @connector: connector to set property on.
+ * @path: path to use for property; must not be NULL.
+ *
+ * This creates a property to expose to userspace to specify a
+ * connector path. This is mainly used for DisplayPort MST where
+ * connectors have a topology and we want to allow userspace to give
+ * them more meaningful names.
+ *
+ * Returns:
+ * Zero on success, negative errno on failure.
+ */
+int drm_connector_set_path_property(struct drm_connector *connector,
+				    const char *path)
+{
+	struct drm_device *dev = connector->dev;
+	int ret;
+
+	ret = drm_property_replace_global_blob(dev,
+	                                       &connector->path_blob_ptr,
+	                                       strlen(path) + 1,
+	                                       path,
+	                                       &connector->base,
+	                                       dev->mode_config.path_property);
+	return ret;
+}
+EXPORT_SYMBOL(drm_connector_set_path_property);
+
+/**
+ * drm_connector_set_tile_property - set tile property on connector
+ * @connector: connector to set property on.
+ *
+ * This looks up the tile information for a connector, and creates a
+ * property for userspace to parse if it exists. The property is of
+ * the form of 8 integers using ':' as a separator.
+ * This is used for dual port tiled displays with DisplayPort SST
+ * or DisplayPort MST connectors.
+ *
+ * Returns:
+ * Zero on success, errno on failure.
+ */
+int drm_connector_set_tile_property(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	char tile[256];
+	int ret;
+
+	if (!connector->has_tile) {
+		ret  = drm_property_replace_global_blob(dev,
+		                                        &connector->tile_blob_ptr,
+		                                        0,
+		                                        NULL,
+		                                        &connector->base,
+		                                        dev->mode_config.tile_property);
+		return ret;
+	}
+
+	snprintf(tile, 256, "%d:%d:%d:%d:%d:%d:%d:%d",
+		 connector->tile_group->id, connector->tile_is_single_monitor,
+		 connector->num_h_tile, connector->num_v_tile,
+		 connector->tile_h_loc, connector->tile_v_loc,
+		 connector->tile_h_size, connector->tile_v_size);
+
+	ret = drm_property_replace_global_blob(dev,
+	                                       &connector->tile_blob_ptr,
+	                                       strlen(tile) + 1,
+	                                       tile,
+	                                       &connector->base,
+	                                       dev->mode_config.tile_property);
+	return ret;
+}
+EXPORT_SYMBOL(drm_connector_set_tile_property);
+
+/**
+ * drm_connector_update_edid_property - update the edid property of a connector
+ * @connector: drm connector
+ * @edid: new value of the edid property
+ *
+ * This function creates a new blob modeset object and assigns its id to the
+ * connector's edid property.
+ * Since we also parse tile information from EDID's displayID block, we also
+ * set the connector's tile property here. See drm_connector_set_tile_property()
+ * for more details.
+ *
+ * Returns:
+ * Zero on success, negative errno on failure.
+ */
+int drm_connector_update_edid_property(struct drm_connector *connector,
+				       const struct edid *edid)
+{
+	struct drm_device *dev = connector->dev;
+	size_t size = 0;
+	int ret;
+	const struct edid *old_edid;
+
+	/* ignore requests to set edid when overridden */
+	if (connector->override_edid)
+		return 0;
+
+	if (edid)
+		size = EDID_LENGTH * (1 + edid->extensions);
+
+	/* Set the display info, using edid if available, otherwise
+	 * resetting the values to defaults. This duplicates the work
+	 * done in drm_add_edid_modes, but that function is not
+	 * consistently called before this one in all drivers and the
+	 * computation is cheap enough that it seems better to
+	 * duplicate it rather than attempt to ensure some arbitrary
+	 * ordering of calls.
+	 */
+	if (edid)
+		drm_add_display_info(connector, edid);
+	else
+		drm_reset_display_info(connector);
+
+	drm_update_tile_info(connector, edid);
+
+	if (connector->edid_blob_ptr) {
+		old_edid = (const struct edid *)connector->edid_blob_ptr->data;
+		if (old_edid) {
+			if (!drm_edid_are_equal(edid, old_edid)) {
+				DRM_DEBUG_KMS("[CONNECTOR:%d:%s] Edid was changed.\n",
+					      connector->base.id, connector->name);
+
+				connector->epoch_counter += 1;
+				DRM_DEBUG_KMS("Updating change counter to %llu\n",
+					      connector->epoch_counter);
+			}
+		}
+	}
+
+	drm_object_property_set_value(&connector->base,
+				      dev->mode_config.non_desktop_property,
+				      connector->display_info.non_desktop);
+
+	ret = drm_property_replace_global_blob(dev,
+					       &connector->edid_blob_ptr,
+	                                       size,
+	                                       edid,
+	                                       &connector->base,
+	                                       dev->mode_config.edid_property);
+	if (ret)
+		return ret;
+	return drm_connector_set_tile_property(connector);
+}
+EXPORT_SYMBOL(drm_connector_update_edid_property);
+
+/**
+ * drm_connector_set_link_status_property - Set link status property of a connector
+ * @connector: drm connector
+ * @link_status: new value of link status property (0: Good, 1: Bad)
+ *
+ * In usual working scenario, this link status property will always be set to
+ * "GOOD". If something fails during or after a mode set, the kernel driver
+ * may set this link status property to "BAD". The caller then needs to send a
+ * hotplug uevent for userspace to re-check the valid modes through
+ * GET_CONNECTOR_IOCTL and retry modeset.
+ *
+ * Note: Drivers cannot rely on userspace to support this property and
+ * issue a modeset. As such, they may choose to handle issues (like
+ * re-training a link) without userspace's intervention.
+ *
+ * The reason for adding this property is to handle link training failures, but
+ * it is not limited to DP or link training. For example, if we implement
+ * asynchronous setcrtc, this property can be used to report any failures in that.
+ */
+void drm_connector_set_link_status_property(struct drm_connector *connector,
+					    uint64_t link_status)
+{
+	struct drm_device *dev = connector->dev;
+
+	drm_modeset_lock(&dev->mode_config.connection_mutex, NULL);
+	connector->state->link_status = link_status;
+	drm_modeset_unlock(&dev->mode_config.connection_mutex);
+}
+EXPORT_SYMBOL(drm_connector_set_link_status_property);
+
+/**
+ * drm_connector_attach_max_bpc_property - attach "max bpc" property
+ * @connector: connector to attach max bpc property on.
+ * @min: The minimum bit depth supported by the connector.
+ * @max: The maximum bit depth supported by the connector.
+ *
+ * This is used to add support for limiting the bit depth on a connector.
+ *
+ * Returns:
+ * Zero on success, negative errno on failure.
+ */
+int drm_connector_attach_max_bpc_property(struct drm_connector *connector,
+					  int min, int max)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_property *prop;
+
+	prop = connector->max_bpc_property;
+	if (!prop) {
+		prop = drm_property_create_range(dev, 0, "max bpc", min, max);
+		if (!prop)
+			return -ENOMEM;
+
+		connector->max_bpc_property = prop;
+	}
+
+	drm_object_attach_property(&connector->base, prop, max);
+	connector->state->max_requested_bpc = max;
+	connector->state->max_bpc = max;
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_connector_attach_max_bpc_property);
+
+/**
+ * drm_connector_set_vrr_capable_property - sets the variable refresh rate
+ * capable property for a connector
+ * @connector: drm connector
+ * @capable: True if the connector is variable refresh rate capable
+ *
+ * Should be used by atomic drivers to update the indicated support for
+ * variable refresh rate over a connector.
+ */
+void drm_connector_set_vrr_capable_property(
+		struct drm_connector *connector, bool capable)
+{
+	if (!connector->vrr_capable_property)
+		return;
+
+	drm_object_property_set_value(&connector->base,
+				      connector->vrr_capable_property,
+				      capable);
+}
+EXPORT_SYMBOL(drm_connector_set_vrr_capable_property);
+
+/**
+ * drm_connector_set_panel_orientation - sets the connector's panel_orientation
+ * @connector: connector for which to set the panel-orientation property.
+ * @panel_orientation: drm_panel_orientation value to set
+ *
+ * This function sets the connector's panel_orientation and attaches
+ * a "panel orientation" property to the connector.
+ *
+ * Calling this function on a connector where the panel_orientation has
+ * already been set is a no-op (e.g. the orientation has been overridden with
+ * a kernel commandline option).
+ *
+ * It is allowed to call this function with a panel_orientation of
+ * DRM_MODE_PANEL_ORIENTATION_UNKNOWN, in which case it is a no-op.
+ *
+ * Returns:
+ * Zero on success, negative errno on failure.
+ */
+int drm_connector_set_panel_orientation(
+	struct drm_connector *connector,
+	enum drm_panel_orientation panel_orientation)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_display_info *info = &connector->display_info;
+	struct drm_property *prop;
+
+	/* Already set? */
+	if (info->panel_orientation != DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
+		return 0;
+
+	/* Don't attach the property if the orientation is unknown */
+	if (panel_orientation == DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
+		return 0;
+
+	info->panel_orientation = panel_orientation;
+
+	prop = dev->mode_config.panel_orientation_property;
+	if (!prop) {
+		prop = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
+				"panel orientation",
+				drm_panel_orientation_enum_list,
+				ARRAY_SIZE(drm_panel_orientation_enum_list));
+		if (!prop)
+			return -ENOMEM;
+
+		dev->mode_config.panel_orientation_property = prop;
+	}
+
+	drm_object_attach_property(&connector->base, prop,
+				   info->panel_orientation);
+	return 0;
+}
+EXPORT_SYMBOL(drm_connector_set_panel_orientation);
+
+/**
+ * drm_connector_set_panel_orientation_with_quirk -
+ *	set the connector's panel_orientation after checking for quirks
+ * @connector: connector for which to init the panel-orientation property.
+ * @panel_orientation: drm_panel_orientation value to set
+ * @width: width in pixels of the panel, used for panel quirk detection
+ * @height: height in pixels of the panel, used for panel quirk detection
+ *
+ * Like drm_connector_set_panel_orientation(), but with a check for platform
+ * specific (e.g. DMI based) quirks overriding the passed in panel_orientation.
+ *
+ * Returns:
+ * Zero on success, negative errno on failure.
+ */
+int drm_connector_set_panel_orientation_with_quirk(
+	struct drm_connector *connector,
+	enum drm_panel_orientation panel_orientation,
+	int width, int height)
+{
+	int orientation_quirk;
+
+	orientation_quirk = drm_get_panel_orientation_quirk(width, height);
+	if (orientation_quirk != DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
+		panel_orientation = orientation_quirk;
+
+	return drm_connector_set_panel_orientation(connector,
+						   panel_orientation);
+}
+EXPORT_SYMBOL(drm_connector_set_panel_orientation_with_quirk);
+
+int drm_connector_set_obj_prop(struct drm_mode_object *obj,
+				    struct drm_property *property,
+				    uint64_t value)
+{
+	int ret = -EINVAL;
+	struct drm_connector *connector = obj_to_connector(obj);
+
+	/* Do DPMS ourselves */
+	if (property == connector->dev->mode_config.dpms_property) {
+		ret = (*connector->funcs->dpms)(connector, (int)value);
+	} else if (connector->funcs->set_property)
+		ret = connector->funcs->set_property(connector, property, value);
+
+	if (!ret)
+		drm_object_property_set_value(&connector->base, property, value);
+	return ret;
+}
+
+int drm_connector_property_set_ioctl(struct drm_device *dev,
+				     void *data, struct drm_file *file_priv)
+{
+	struct drm_mode_connector_set_property *conn_set_prop = data;
+	struct drm_mode_obj_set_property obj_set_prop = {
+		.value = conn_set_prop->value,
+		.prop_id = conn_set_prop->prop_id,
+		.obj_id = conn_set_prop->connector_id,
+		.obj_type = DRM_MODE_OBJECT_CONNECTOR
+	};
+
+	/* It does all the locking and checking we need */
+	return drm_mode_obj_set_property_ioctl(dev, &obj_set_prop, file_priv);
+}
+
+static struct drm_encoder *drm_connector_get_encoder(struct drm_connector *connector)
+{
+	/* For atomic drivers only state objects are synchronously updated and
+	 * protected by modeset locks, so check those first. */
+	if (connector->state)
+		return connector->state->best_encoder;
+	return connector->encoder;
+}
+
+static bool
+drm_mode_expose_to_userspace(const struct drm_display_mode *mode,
+			     const struct list_head *modes,
+			     const struct drm_file *file_priv)
+{
+	/*
+	 * If user-space hasn't configured the driver to expose the stereo 3D
+	 * modes, don't expose them.
+	 */
+	if (!file_priv->stereo_allowed && drm_mode_is_stereo(mode))
+		return false;
+	/*
+	 * If user-space hasn't configured the driver to expose the modes
+	 * with aspect-ratio, don't expose them. However if such a mode
+	 * is unique, let it be exposed, but reset the aspect-ratio flags
+	 * while preparing the list of user-modes.
+	 */
+	if (!file_priv->aspect_ratio_allowed) {
+		const struct drm_display_mode *mode_itr;
+
+		list_for_each_entry(mode_itr, modes, head) {
+			if (mode_itr->expose_to_userspace &&
+			    drm_mode_match(mode_itr, mode,
+					   DRM_MODE_MATCH_TIMINGS |
+					   DRM_MODE_MATCH_CLOCK |
+					   DRM_MODE_MATCH_FLAGS |
+					   DRM_MODE_MATCH_3D_FLAGS))
+				return false;
+		}
+	}
+
+	return true;
+}
+
+int drm_mode_getconnector(struct drm_device *dev, void *data,
+			  struct drm_file *file_priv)
+{
+	struct drm_mode_get_connector *out_resp = data;
+	struct drm_connector *connector;
+	struct drm_encoder *encoder;
+	struct drm_display_mode *mode;
+	int mode_count = 0;
+	int encoders_count = 0;
+	int ret = 0;
+	int copied = 0;
+	struct drm_mode_modeinfo u_mode;
+	struct drm_mode_modeinfo __user *mode_ptr;
+	uint32_t __user *encoder_ptr;
+
+	if (!drm_core_check_feature(dev, DRIVER_MODESET))
+		return -EOPNOTSUPP;
+
+	memset(&u_mode, 0, sizeof(struct drm_mode_modeinfo));
+
+	connector = drm_connector_lookup(dev, file_priv, out_resp->connector_id);
+	if (!connector)
+		return -ENOENT;
+
+	encoders_count = hweight32(connector->possible_encoders);
+
+	if ((out_resp->count_encoders >= encoders_count) && encoders_count) {
+		copied = 0;
+		encoder_ptr = (uint32_t __user *)(unsigned long)(out_resp->encoders_ptr);
+
+		drm_connector_for_each_possible_encoder(connector, encoder) {
+			if (put_user(encoder->base.id, encoder_ptr + copied)) {
+				ret = -EFAULT;
+				goto out;
+			}
+			copied++;
+		}
+	}
+	out_resp->count_encoders = encoders_count;
+
+	out_resp->connector_id = connector->base.id;
+	out_resp->connector_type = connector->connector_type;
+	out_resp->connector_type_id = connector->connector_type_id;
+
+	mutex_lock(&dev->mode_config.mutex);
+	if (out_resp->count_modes == 0) {
+		connector->funcs->fill_modes(connector,
+					     dev->mode_config.max_width,
+					     dev->mode_config.max_height);
+	}
+
+	out_resp->mm_width = connector->display_info.width_mm;
+	out_resp->mm_height = connector->display_info.height_mm;
+	out_resp->subpixel = connector->display_info.subpixel_order;
+	out_resp->connection = connector->status;
+
+	/* delayed so we get modes regardless of pre-fill_modes state */
+	list_for_each_entry(mode, &connector->modes, head) {
+		WARN_ON(mode->expose_to_userspace);
+
+		if (drm_mode_expose_to_userspace(mode, &connector->modes,
+						 file_priv)) {
+			mode->expose_to_userspace = true;
+			mode_count++;
+		}
+	}
+
+	/*
+	 * This ioctl is called twice, once to determine how much space is
+	 * needed, and the 2nd time to fill it.
+	 */
+	if ((out_resp->count_modes >= mode_count) && mode_count) {
+		copied = 0;
+		mode_ptr = (struct drm_mode_modeinfo __user *)(unsigned long)out_resp->modes_ptr;
+		list_for_each_entry(mode, &connector->modes, head) {
+			if (!mode->expose_to_userspace)
+				continue;
+
+			/* Clear the tag for the next time around */
+			mode->expose_to_userspace = false;
+
+			drm_mode_convert_to_umode(&u_mode, mode);
+			/*
+			 * Reset aspect ratio flags of user-mode, if modes with
+			 * aspect-ratio are not supported.
+			 */
+			if (!file_priv->aspect_ratio_allowed)
+				u_mode.flags &= ~DRM_MODE_FLAG_PIC_AR_MASK;
+			if (copy_to_user(mode_ptr + copied,
+					 &u_mode, sizeof(u_mode))) {
+				ret = -EFAULT;
+
+				/*
+				 * Clear the tag for the rest of
+				 * the modes for the next time around.
+				 */
+				list_for_each_entry_continue(mode, &connector->modes, head)
+					mode->expose_to_userspace = false;
+
+				mutex_unlock(&dev->mode_config.mutex);
+
+				goto out;
+			}
+			copied++;
+		}
+	} else {
+		/* Clear the tag for the next time around */
+		list_for_each_entry(mode, &connector->modes, head)
+			mode->expose_to_userspace = false;
+	}
+
+	out_resp->count_modes = mode_count;
+	mutex_unlock(&dev->mode_config.mutex);
+
+	drm_modeset_lock(&dev->mode_config.connection_mutex, NULL);
+	encoder = drm_connector_get_encoder(connector);
+	if (encoder)
+		out_resp->encoder_id = encoder->base.id;
+	else
+		out_resp->encoder_id = 0;
+
+	/* Only grab properties after probing, to make sure EDID and other
+	 * properties reflect the latest status. */
+	ret = drm_mode_object_get_properties(&connector->base, file_priv->atomic,
+			(uint32_t __user *)(unsigned long)(out_resp->props_ptr),
+			(uint64_t __user *)(unsigned long)(out_resp->prop_values_ptr),
+			&out_resp->count_props);
+	drm_modeset_unlock(&dev->mode_config.connection_mutex);
+
+out:
+	drm_connector_put(connector);
+
+	return ret;
+}
+
+/**
+ * drm_connector_find_by_fwnode - Find a connector based on the associated fwnode
+ * @fwnode: fwnode for which to find the matching drm_connector
+ *
+ * This functions looks up a drm_connector based on its associated fwnode. When
+ * a connector is found a reference to the connector is returned. The caller must
+ * call drm_connector_put() to release this reference when it is done with the
+ * connector.
+ *
+ * Returns: A reference to the found connector or an ERR_PTR().
+ */
+struct drm_connector *drm_connector_find_by_fwnode(struct fwnode_handle *fwnode)
+{
+	struct drm_connector *connector, *found = ERR_PTR(-ENODEV);
+
+	if (!fwnode)
+		return ERR_PTR(-ENODEV);
+
+	mutex_lock(&connector_list_lock);
+
+	list_for_each_entry(connector, &connector_list, global_connector_list_entry) {
+		if (connector->fwnode == fwnode ||
+		    (connector->fwnode && connector->fwnode->secondary == fwnode)) {
+			drm_connector_get(connector);
+			found = connector;
+			break;
+		}
+	}
+
+	mutex_unlock(&connector_list_lock);
+
+	return found;
+}
+
+/**
+ * drm_connector_oob_hotplug_event - Report out-of-band hotplug event to connector
+ * @connector: connector to report the event on
+ *
+ * On some hardware a hotplug event notification may come from outside the display
+ * driver / device. An example of this is some USB Type-C setups where the hardware
+ * muxes the DisplayPort data and aux-lines but does not pass the altmode HPD
+ * status bit to the GPU's DP HPD pin.
+ *
+ * This function can be used to report these out-of-band events after obtaining
+ * a drm_connector reference through calling drm_connector_find_by_fwnode().
+ */
+void drm_connector_oob_hotplug_event(struct fwnode_handle *connector_fwnode)
+{
+	struct drm_connector *connector;
+
+	connector = drm_connector_find_by_fwnode(connector_fwnode);
+	if (IS_ERR(connector))
+		return;
+
+	if (connector->funcs->oob_hotplug_event)
+		connector->funcs->oob_hotplug_event(connector);
+
+	drm_connector_put(connector);
+}
+EXPORT_SYMBOL(drm_connector_oob_hotplug_event);
+
+
+/**
+ * DOC: Tile group
+ *
+ * Tile groups are used to represent tiled monitors with a unique integer
+ * identifier. Tiled monitors using DisplayID v1.3 have a unique 8-byte handle,
+ * we store this in a tile group, so we have a common identifier for all tiles
+ * in a monitor group. The property is called "TILE". Drivers can manage tile
+ * groups using drm_mode_create_tile_group(), drm_mode_put_tile_group() and
+ * drm_mode_get_tile_group(). But this is only needed for internal panels where
+ * the tile group information is exposed through a non-standard way.
+ */
+
+static void drm_tile_group_free(struct kref *kref)
+{
+	struct drm_tile_group *tg = container_of(kref, struct drm_tile_group, refcount);
+	struct drm_device *dev = tg->dev;
+
+	mutex_lock(&dev->mode_config.idr_mutex);
+	idr_remove(&dev->mode_config.tile_idr, tg->id);
+	mutex_unlock(&dev->mode_config.idr_mutex);
+	kfree(tg);
+}
+
+/**
+ * drm_mode_put_tile_group - drop a reference to a tile group.
+ * @dev: DRM device
+ * @tg: tile group to drop reference to.
+ *
+ * drop reference to tile group and free if 0.
+ */
+void drm_mode_put_tile_group(struct drm_device *dev,
+			     struct drm_tile_group *tg)
+{
+	kref_put(&tg->refcount, drm_tile_group_free);
+}
+EXPORT_SYMBOL(drm_mode_put_tile_group);
+
+/**
+ * drm_mode_get_tile_group - get a reference to an existing tile group
+ * @dev: DRM device
+ * @topology: 8-bytes unique per monitor.
+ *
+ * Use the unique bytes to get a reference to an existing tile group.
+ *
+ * RETURNS:
+ * tile group or NULL if not found.
+ */
+struct drm_tile_group *drm_mode_get_tile_group(struct drm_device *dev,
+					       const char topology[8])
+{
+	struct drm_tile_group *tg;
+	int id;
+
+	mutex_lock(&dev->mode_config.idr_mutex);
+	idr_for_each_entry(&dev->mode_config.tile_idr, tg, id) {
+		if (!memcmp(tg->group_data, topology, 8)) {
+			if (!kref_get_unless_zero(&tg->refcount))
+				tg = NULL;
+			mutex_unlock(&dev->mode_config.idr_mutex);
+			return tg;
+		}
+	}
+	mutex_unlock(&dev->mode_config.idr_mutex);
+	return NULL;
+}
+EXPORT_SYMBOL(drm_mode_get_tile_group);
+
+/**
+ * drm_mode_create_tile_group - create a tile group from a displayid description
+ * @dev: DRM device
+ * @topology: 8-bytes unique per monitor.
+ *
+ * Create a tile group for the unique monitor, and get a unique
+ * identifier for the tile group.
+ *
+ * RETURNS:
+ * new tile group or NULL.
+ */
+struct drm_tile_group *drm_mode_create_tile_group(struct drm_device *dev,
+						  const char topology[8])
+{
+	struct drm_tile_group *tg;
+	int ret;
+
+	tg = kzalloc(sizeof(*tg), GFP_KERNEL);
+	if (!tg)
+		return NULL;
+
+	kref_init(&tg->refcount);
+	memcpy(tg->group_data, topology, 8);
+	tg->dev = dev;
+
+	mutex_lock(&dev->mode_config.idr_mutex);
+	ret = idr_alloc(&dev->mode_config.tile_idr, tg, 1, 0, GFP_KERNEL);
+	if (ret >= 0) {
+		tg->id = ret;
+	} else {
+		kfree(tg);
+		tg = NULL;
+	}
+
+	mutex_unlock(&dev->mode_config.idr_mutex);
+	return tg;
+}
+EXPORT_SYMBOL(drm_mode_create_tile_group);