diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-27 10:05:51 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-27 10:05:51 +0000 |
commit | 5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 (patch) | |
tree | a94efe259b9009378be6d90eb30d2b019d95c194 /drivers/gpu/drm/imx/imx-ldb.c | |
parent | Initial commit. (diff) | |
download | linux-5d1646d90e1f2cceb9f0828f4b28318cd0ec7744.tar.xz linux-5d1646d90e1f2cceb9f0828f4b28318cd0ec7744.zip |
Adding upstream version 5.10.209.upstream/5.10.209
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/gpu/drm/imx/imx-ldb.c')
-rw-r--r-- | drivers/gpu/drm/imx/imx-ldb.c | 751 |
1 files changed, 751 insertions, 0 deletions
diff --git a/drivers/gpu/drm/imx/imx-ldb.c b/drivers/gpu/drm/imx/imx-ldb.c new file mode 100644 index 000000000..efd13e533 --- /dev/null +++ b/drivers/gpu/drm/imx/imx-ldb.c @@ -0,0 +1,751 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * i.MX drm driver - LVDS display bridge + * + * Copyright (C) 2012 Sascha Hauer, Pengutronix + */ + +#include <linux/clk.h> +#include <linux/component.h> +#include <linux/mfd/syscon.h> +#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/of_graph.h> +#include <linux/regmap.h> +#include <linux/videodev2.h> + +#include <video/of_display_timing.h> +#include <video/of_videomode.h> + +#include <drm/drm_atomic.h> +#include <drm/drm_atomic_helper.h> +#include <drm/drm_bridge.h> +#include <drm/drm_fb_helper.h> +#include <drm/drm_of.h> +#include <drm/drm_panel.h> +#include <drm/drm_print.h> +#include <drm/drm_probe_helper.h> +#include <drm/drm_simple_kms_helper.h> + +#include "imx-drm.h" + +#define DRIVER_NAME "imx-ldb" + +#define LDB_CH0_MODE_EN_TO_DI0 (1 << 0) +#define LDB_CH0_MODE_EN_TO_DI1 (3 << 0) +#define LDB_CH0_MODE_EN_MASK (3 << 0) +#define LDB_CH1_MODE_EN_TO_DI0 (1 << 2) +#define LDB_CH1_MODE_EN_TO_DI1 (3 << 2) +#define LDB_CH1_MODE_EN_MASK (3 << 2) +#define LDB_SPLIT_MODE_EN (1 << 4) +#define LDB_DATA_WIDTH_CH0_24 (1 << 5) +#define LDB_BIT_MAP_CH0_JEIDA (1 << 6) +#define LDB_DATA_WIDTH_CH1_24 (1 << 7) +#define LDB_BIT_MAP_CH1_JEIDA (1 << 8) +#define LDB_DI0_VS_POL_ACT_LOW (1 << 9) +#define LDB_DI1_VS_POL_ACT_LOW (1 << 10) +#define LDB_BGREF_RMODE_INT (1 << 15) + +struct imx_ldb; + +struct imx_ldb_channel { + struct imx_ldb *ldb; + struct drm_connector connector; + struct drm_encoder encoder; + + /* Defines what is connected to the ldb, only one at a time */ + struct drm_panel *panel; + struct drm_bridge *bridge; + + struct device_node *child; + struct i2c_adapter *ddc; + int chno; + void *edid; + struct drm_display_mode mode; + int mode_valid; + u32 bus_format; + u32 bus_flags; +}; + +static inline struct imx_ldb_channel *con_to_imx_ldb_ch(struct drm_connector *c) +{ + return container_of(c, struct imx_ldb_channel, connector); +} + +static inline struct imx_ldb_channel *enc_to_imx_ldb_ch(struct drm_encoder *e) +{ + return container_of(e, struct imx_ldb_channel, encoder); +} + +struct bus_mux { + int reg; + int shift; + int mask; +}; + +struct imx_ldb { + struct regmap *regmap; + struct device *dev; + struct imx_ldb_channel channel[2]; + struct clk *clk[2]; /* our own clock */ + struct clk *clk_sel[4]; /* parent of display clock */ + struct clk *clk_parent[4]; /* original parent of clk_sel */ + struct clk *clk_pll[2]; /* upstream clock we can adjust */ + u32 ldb_ctrl; + const struct bus_mux *lvds_mux; +}; + +static void imx_ldb_ch_set_bus_format(struct imx_ldb_channel *imx_ldb_ch, + u32 bus_format) +{ + struct imx_ldb *ldb = imx_ldb_ch->ldb; + int dual = ldb->ldb_ctrl & LDB_SPLIT_MODE_EN; + + switch (bus_format) { + case MEDIA_BUS_FMT_RGB666_1X7X3_SPWG: + break; + case MEDIA_BUS_FMT_RGB888_1X7X4_SPWG: + if (imx_ldb_ch->chno == 0 || dual) + ldb->ldb_ctrl |= LDB_DATA_WIDTH_CH0_24; + if (imx_ldb_ch->chno == 1 || dual) + ldb->ldb_ctrl |= LDB_DATA_WIDTH_CH1_24; + break; + case MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA: + if (imx_ldb_ch->chno == 0 || dual) + ldb->ldb_ctrl |= LDB_DATA_WIDTH_CH0_24 | + LDB_BIT_MAP_CH0_JEIDA; + if (imx_ldb_ch->chno == 1 || dual) + ldb->ldb_ctrl |= LDB_DATA_WIDTH_CH1_24 | + LDB_BIT_MAP_CH1_JEIDA; + break; + } +} + +static int imx_ldb_connector_get_modes(struct drm_connector *connector) +{ + struct imx_ldb_channel *imx_ldb_ch = con_to_imx_ldb_ch(connector); + int num_modes; + + num_modes = drm_panel_get_modes(imx_ldb_ch->panel, connector); + if (num_modes > 0) + return num_modes; + + if (!imx_ldb_ch->edid && imx_ldb_ch->ddc) + imx_ldb_ch->edid = drm_get_edid(connector, imx_ldb_ch->ddc); + + if (imx_ldb_ch->edid) { + drm_connector_update_edid_property(connector, + imx_ldb_ch->edid); + num_modes = drm_add_edid_modes(connector, imx_ldb_ch->edid); + } + + if (imx_ldb_ch->mode_valid) { + struct drm_display_mode *mode; + + mode = drm_mode_create(connector->dev); + if (!mode) + return -EINVAL; + drm_mode_copy(mode, &imx_ldb_ch->mode); + mode->type |= DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; + drm_mode_probed_add(connector, mode); + num_modes++; + } + + return num_modes; +} + +static void imx_ldb_set_clock(struct imx_ldb *ldb, int mux, int chno, + unsigned long serial_clk, unsigned long di_clk) +{ + int ret; + + dev_dbg(ldb->dev, "%s: now: %ld want: %ld\n", __func__, + clk_get_rate(ldb->clk_pll[chno]), serial_clk); + clk_set_rate(ldb->clk_pll[chno], serial_clk); + + dev_dbg(ldb->dev, "%s after: %ld\n", __func__, + clk_get_rate(ldb->clk_pll[chno])); + + dev_dbg(ldb->dev, "%s: now: %ld want: %ld\n", __func__, + clk_get_rate(ldb->clk[chno]), + (long int)di_clk); + clk_set_rate(ldb->clk[chno], di_clk); + + dev_dbg(ldb->dev, "%s after: %ld\n", __func__, + clk_get_rate(ldb->clk[chno])); + + /* set display clock mux to LDB input clock */ + ret = clk_set_parent(ldb->clk_sel[mux], ldb->clk[chno]); + if (ret) + dev_err(ldb->dev, + "unable to set di%d parent clock to ldb_di%d\n", mux, + chno); +} + +static void imx_ldb_encoder_enable(struct drm_encoder *encoder) +{ + struct imx_ldb_channel *imx_ldb_ch = enc_to_imx_ldb_ch(encoder); + struct imx_ldb *ldb = imx_ldb_ch->ldb; + int dual = ldb->ldb_ctrl & LDB_SPLIT_MODE_EN; + int mux = drm_of_encoder_active_port_id(imx_ldb_ch->child, encoder); + + if (mux < 0 || mux >= ARRAY_SIZE(ldb->clk_sel)) { + dev_warn(ldb->dev, "%s: invalid mux %d\n", __func__, mux); + return; + } + + drm_panel_prepare(imx_ldb_ch->panel); + + if (dual) { + clk_set_parent(ldb->clk_sel[mux], ldb->clk[0]); + clk_set_parent(ldb->clk_sel[mux], ldb->clk[1]); + + clk_prepare_enable(ldb->clk[0]); + clk_prepare_enable(ldb->clk[1]); + } else { + clk_set_parent(ldb->clk_sel[mux], ldb->clk[imx_ldb_ch->chno]); + } + + if (imx_ldb_ch == &ldb->channel[0] || dual) { + ldb->ldb_ctrl &= ~LDB_CH0_MODE_EN_MASK; + if (mux == 0 || ldb->lvds_mux) + ldb->ldb_ctrl |= LDB_CH0_MODE_EN_TO_DI0; + else if (mux == 1) + ldb->ldb_ctrl |= LDB_CH0_MODE_EN_TO_DI1; + } + if (imx_ldb_ch == &ldb->channel[1] || dual) { + ldb->ldb_ctrl &= ~LDB_CH1_MODE_EN_MASK; + if (mux == 1 || ldb->lvds_mux) + ldb->ldb_ctrl |= LDB_CH1_MODE_EN_TO_DI1; + else if (mux == 0) + ldb->ldb_ctrl |= LDB_CH1_MODE_EN_TO_DI0; + } + + if (ldb->lvds_mux) { + const struct bus_mux *lvds_mux = NULL; + + if (imx_ldb_ch == &ldb->channel[0]) + lvds_mux = &ldb->lvds_mux[0]; + else if (imx_ldb_ch == &ldb->channel[1]) + lvds_mux = &ldb->lvds_mux[1]; + + regmap_update_bits(ldb->regmap, lvds_mux->reg, lvds_mux->mask, + mux << lvds_mux->shift); + } + + regmap_write(ldb->regmap, IOMUXC_GPR2, ldb->ldb_ctrl); + + drm_panel_enable(imx_ldb_ch->panel); +} + +static void +imx_ldb_encoder_atomic_mode_set(struct drm_encoder *encoder, + struct drm_crtc_state *crtc_state, + struct drm_connector_state *connector_state) +{ + struct imx_ldb_channel *imx_ldb_ch = enc_to_imx_ldb_ch(encoder); + struct drm_display_mode *mode = &crtc_state->adjusted_mode; + struct imx_ldb *ldb = imx_ldb_ch->ldb; + int dual = ldb->ldb_ctrl & LDB_SPLIT_MODE_EN; + unsigned long serial_clk; + unsigned long di_clk = mode->clock * 1000; + int mux = drm_of_encoder_active_port_id(imx_ldb_ch->child, encoder); + u32 bus_format = imx_ldb_ch->bus_format; + + if (mux < 0 || mux >= ARRAY_SIZE(ldb->clk_sel)) { + dev_warn(ldb->dev, "%s: invalid mux %d\n", __func__, mux); + return; + } + + if (mode->clock > 170000) { + dev_warn(ldb->dev, + "%s: mode exceeds 170 MHz pixel clock\n", __func__); + } + if (mode->clock > 85000 && !dual) { + dev_warn(ldb->dev, + "%s: mode exceeds 85 MHz pixel clock\n", __func__); + } + + if (dual) { + serial_clk = 3500UL * mode->clock; + imx_ldb_set_clock(ldb, mux, 0, serial_clk, di_clk); + imx_ldb_set_clock(ldb, mux, 1, serial_clk, di_clk); + } else { + serial_clk = 7000UL * mode->clock; + imx_ldb_set_clock(ldb, mux, imx_ldb_ch->chno, serial_clk, + di_clk); + } + + /* FIXME - assumes straight connections DI0 --> CH0, DI1 --> CH1 */ + if (imx_ldb_ch == &ldb->channel[0] || dual) { + if (mode->flags & DRM_MODE_FLAG_NVSYNC) + ldb->ldb_ctrl |= LDB_DI0_VS_POL_ACT_LOW; + else if (mode->flags & DRM_MODE_FLAG_PVSYNC) + ldb->ldb_ctrl &= ~LDB_DI0_VS_POL_ACT_LOW; + } + if (imx_ldb_ch == &ldb->channel[1] || dual) { + if (mode->flags & DRM_MODE_FLAG_NVSYNC) + ldb->ldb_ctrl |= LDB_DI1_VS_POL_ACT_LOW; + else if (mode->flags & DRM_MODE_FLAG_PVSYNC) + ldb->ldb_ctrl &= ~LDB_DI1_VS_POL_ACT_LOW; + } + + if (!bus_format) { + struct drm_connector *connector = connector_state->connector; + struct drm_display_info *di = &connector->display_info; + + if (di->num_bus_formats) + bus_format = di->bus_formats[0]; + } + imx_ldb_ch_set_bus_format(imx_ldb_ch, bus_format); +} + +static void imx_ldb_encoder_disable(struct drm_encoder *encoder) +{ + struct imx_ldb_channel *imx_ldb_ch = enc_to_imx_ldb_ch(encoder); + struct imx_ldb *ldb = imx_ldb_ch->ldb; + int dual = ldb->ldb_ctrl & LDB_SPLIT_MODE_EN; + int mux, ret; + + drm_panel_disable(imx_ldb_ch->panel); + + if (imx_ldb_ch == &ldb->channel[0] || dual) + ldb->ldb_ctrl &= ~LDB_CH0_MODE_EN_MASK; + if (imx_ldb_ch == &ldb->channel[1] || dual) + ldb->ldb_ctrl &= ~LDB_CH1_MODE_EN_MASK; + + regmap_write(ldb->regmap, IOMUXC_GPR2, ldb->ldb_ctrl); + + if (dual) { + clk_disable_unprepare(ldb->clk[0]); + clk_disable_unprepare(ldb->clk[1]); + } + + if (ldb->lvds_mux) { + const struct bus_mux *lvds_mux = NULL; + + if (imx_ldb_ch == &ldb->channel[0]) + lvds_mux = &ldb->lvds_mux[0]; + else if (imx_ldb_ch == &ldb->channel[1]) + lvds_mux = &ldb->lvds_mux[1]; + + regmap_read(ldb->regmap, lvds_mux->reg, &mux); + mux &= lvds_mux->mask; + mux >>= lvds_mux->shift; + } else { + mux = (imx_ldb_ch == &ldb->channel[0]) ? 0 : 1; + } + + /* set display clock mux back to original input clock */ + ret = clk_set_parent(ldb->clk_sel[mux], ldb->clk_parent[mux]); + if (ret) + dev_err(ldb->dev, + "unable to set di%d parent clock to original parent\n", + mux); + + drm_panel_unprepare(imx_ldb_ch->panel); +} + +static int imx_ldb_encoder_atomic_check(struct drm_encoder *encoder, + struct drm_crtc_state *crtc_state, + struct drm_connector_state *conn_state) +{ + struct imx_crtc_state *imx_crtc_state = to_imx_crtc_state(crtc_state); + struct imx_ldb_channel *imx_ldb_ch = enc_to_imx_ldb_ch(encoder); + struct drm_display_info *di = &conn_state->connector->display_info; + u32 bus_format = imx_ldb_ch->bus_format; + + /* Bus format description in DT overrides connector display info. */ + if (!bus_format && di->num_bus_formats) { + bus_format = di->bus_formats[0]; + imx_crtc_state->bus_flags = di->bus_flags; + } else { + bus_format = imx_ldb_ch->bus_format; + imx_crtc_state->bus_flags = imx_ldb_ch->bus_flags; + } + switch (bus_format) { + case MEDIA_BUS_FMT_RGB666_1X7X3_SPWG: + imx_crtc_state->bus_format = MEDIA_BUS_FMT_RGB666_1X18; + break; + case MEDIA_BUS_FMT_RGB888_1X7X4_SPWG: + case MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA: + imx_crtc_state->bus_format = MEDIA_BUS_FMT_RGB888_1X24; + break; + default: + return -EINVAL; + } + + imx_crtc_state->di_hsync_pin = 2; + imx_crtc_state->di_vsync_pin = 3; + + return 0; +} + + +static const struct drm_connector_funcs imx_ldb_connector_funcs = { + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = imx_drm_connector_destroy, + .reset = drm_atomic_helper_connector_reset, + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, +}; + +static const struct drm_connector_helper_funcs imx_ldb_connector_helper_funcs = { + .get_modes = imx_ldb_connector_get_modes, +}; + +static const struct drm_encoder_helper_funcs imx_ldb_encoder_helper_funcs = { + .atomic_mode_set = imx_ldb_encoder_atomic_mode_set, + .enable = imx_ldb_encoder_enable, + .disable = imx_ldb_encoder_disable, + .atomic_check = imx_ldb_encoder_atomic_check, +}; + +static int imx_ldb_get_clk(struct imx_ldb *ldb, int chno) +{ + char clkname[16]; + + snprintf(clkname, sizeof(clkname), "di%d", chno); + ldb->clk[chno] = devm_clk_get(ldb->dev, clkname); + if (IS_ERR(ldb->clk[chno])) + return PTR_ERR(ldb->clk[chno]); + + snprintf(clkname, sizeof(clkname), "di%d_pll", chno); + ldb->clk_pll[chno] = devm_clk_get(ldb->dev, clkname); + + return PTR_ERR_OR_ZERO(ldb->clk_pll[chno]); +} + +static int imx_ldb_register(struct drm_device *drm, + struct imx_ldb_channel *imx_ldb_ch) +{ + struct imx_ldb *ldb = imx_ldb_ch->ldb; + struct drm_encoder *encoder = &imx_ldb_ch->encoder; + int ret; + + ret = imx_drm_encoder_parse_of(drm, encoder, imx_ldb_ch->child); + if (ret) + return ret; + + ret = imx_ldb_get_clk(ldb, imx_ldb_ch->chno); + if (ret) + return ret; + + if (ldb->ldb_ctrl & LDB_SPLIT_MODE_EN) { + ret = imx_ldb_get_clk(ldb, 1); + if (ret) + return ret; + } + + drm_encoder_helper_add(encoder, &imx_ldb_encoder_helper_funcs); + drm_simple_encoder_init(drm, encoder, DRM_MODE_ENCODER_LVDS); + + if (imx_ldb_ch->bridge) { + ret = drm_bridge_attach(&imx_ldb_ch->encoder, + imx_ldb_ch->bridge, NULL, 0); + if (ret) { + DRM_ERROR("Failed to initialize bridge with drm\n"); + return ret; + } + } else { + /* + * We want to add the connector whenever there is no bridge + * that brings its own, not only when there is a panel. For + * historical reasons, the ldb driver can also work without + * a panel. + */ + drm_connector_helper_add(&imx_ldb_ch->connector, + &imx_ldb_connector_helper_funcs); + drm_connector_init_with_ddc(drm, &imx_ldb_ch->connector, + &imx_ldb_connector_funcs, + DRM_MODE_CONNECTOR_LVDS, + imx_ldb_ch->ddc); + drm_connector_attach_encoder(&imx_ldb_ch->connector, encoder); + } + + return 0; +} + +struct imx_ldb_bit_mapping { + u32 bus_format; + u32 datawidth; + const char * const mapping; +}; + +static const struct imx_ldb_bit_mapping imx_ldb_bit_mappings[] = { + { MEDIA_BUS_FMT_RGB666_1X7X3_SPWG, 18, "spwg" }, + { MEDIA_BUS_FMT_RGB888_1X7X4_SPWG, 24, "spwg" }, + { MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA, 24, "jeida" }, +}; + +static u32 of_get_bus_format(struct device *dev, struct device_node *np) +{ + const char *bm; + u32 datawidth = 0; + int ret, i; + + ret = of_property_read_string(np, "fsl,data-mapping", &bm); + if (ret < 0) + return ret; + + of_property_read_u32(np, "fsl,data-width", &datawidth); + + for (i = 0; i < ARRAY_SIZE(imx_ldb_bit_mappings); i++) { + if (!strcasecmp(bm, imx_ldb_bit_mappings[i].mapping) && + datawidth == imx_ldb_bit_mappings[i].datawidth) + return imx_ldb_bit_mappings[i].bus_format; + } + + dev_err(dev, "invalid data mapping: %d-bit \"%s\"\n", datawidth, bm); + + return -ENOENT; +} + +static struct bus_mux imx6q_lvds_mux[2] = { + { + .reg = IOMUXC_GPR3, + .shift = 6, + .mask = IMX6Q_GPR3_LVDS0_MUX_CTL_MASK, + }, { + .reg = IOMUXC_GPR3, + .shift = 8, + .mask = IMX6Q_GPR3_LVDS1_MUX_CTL_MASK, + } +}; + +/* + * For a device declaring compatible = "fsl,imx6q-ldb", "fsl,imx53-ldb", + * of_match_device will walk through this list and take the first entry + * matching any of its compatible values. Therefore, the more generic + * entries (in this case fsl,imx53-ldb) need to be ordered last. + */ +static const struct of_device_id imx_ldb_dt_ids[] = { + { .compatible = "fsl,imx6q-ldb", .data = imx6q_lvds_mux, }, + { .compatible = "fsl,imx53-ldb", .data = NULL, }, + { } +}; +MODULE_DEVICE_TABLE(of, imx_ldb_dt_ids); + +static int imx_ldb_panel_ddc(struct device *dev, + struct imx_ldb_channel *channel, struct device_node *child) +{ + struct device_node *ddc_node; + const u8 *edidp; + int ret; + + ddc_node = of_parse_phandle(child, "ddc-i2c-bus", 0); + if (ddc_node) { + channel->ddc = of_find_i2c_adapter_by_node(ddc_node); + of_node_put(ddc_node); + if (!channel->ddc) { + dev_warn(dev, "failed to get ddc i2c adapter\n"); + return -EPROBE_DEFER; + } + } + + if (!channel->ddc) { + int edid_len; + + /* if no DDC available, fallback to hardcoded EDID */ + dev_dbg(dev, "no ddc available\n"); + + edidp = of_get_property(child, "edid", &edid_len); + if (edidp) { + channel->edid = kmemdup(edidp, edid_len, GFP_KERNEL); + if (!channel->edid) + return -ENOMEM; + } else if (!channel->panel) { + /* fallback to display-timings node */ + ret = of_get_drm_display_mode(child, + &channel->mode, + &channel->bus_flags, + OF_USE_NATIVE_MODE); + if (!ret) + channel->mode_valid = 1; + } + } + return 0; +} + +static int imx_ldb_bind(struct device *dev, struct device *master, void *data) +{ + struct drm_device *drm = data; + struct device_node *np = dev->of_node; + const struct of_device_id *of_id = + of_match_device(imx_ldb_dt_ids, dev); + struct device_node *child; + struct imx_ldb *imx_ldb; + int dual; + int ret; + int i; + + imx_ldb = dev_get_drvdata(dev); + memset(imx_ldb, 0, sizeof(*imx_ldb)); + + imx_ldb->regmap = syscon_regmap_lookup_by_phandle(np, "gpr"); + if (IS_ERR(imx_ldb->regmap)) { + dev_err(dev, "failed to get parent regmap\n"); + return PTR_ERR(imx_ldb->regmap); + } + + /* disable LDB by resetting the control register to POR default */ + regmap_write(imx_ldb->regmap, IOMUXC_GPR2, 0); + + imx_ldb->dev = dev; + + if (of_id) + imx_ldb->lvds_mux = of_id->data; + + dual = of_property_read_bool(np, "fsl,dual-channel"); + if (dual) + imx_ldb->ldb_ctrl |= LDB_SPLIT_MODE_EN; + + /* + * There are three different possible clock mux configurations: + * i.MX53: ipu1_di0_sel, ipu1_di1_sel + * i.MX6q: ipu1_di0_sel, ipu1_di1_sel, ipu2_di0_sel, ipu2_di1_sel + * i.MX6dl: ipu1_di0_sel, ipu1_di1_sel, lcdif_sel + * Map them all to di0_sel...di3_sel. + */ + for (i = 0; i < 4; i++) { + char clkname[16]; + + sprintf(clkname, "di%d_sel", i); + imx_ldb->clk_sel[i] = devm_clk_get(imx_ldb->dev, clkname); + if (IS_ERR(imx_ldb->clk_sel[i])) { + ret = PTR_ERR(imx_ldb->clk_sel[i]); + imx_ldb->clk_sel[i] = NULL; + break; + } + + imx_ldb->clk_parent[i] = clk_get_parent(imx_ldb->clk_sel[i]); + } + if (i == 0) + return ret; + + for_each_child_of_node(np, child) { + struct imx_ldb_channel *channel; + int bus_format; + + ret = of_property_read_u32(child, "reg", &i); + if (ret || i < 0 || i > 1) { + ret = -EINVAL; + goto free_child; + } + + if (!of_device_is_available(child)) + continue; + + if (dual && i > 0) { + dev_warn(dev, "dual-channel mode, ignoring second output\n"); + continue; + } + + channel = &imx_ldb->channel[i]; + channel->ldb = imx_ldb; + channel->chno = i; + + /* + * The output port is port@4 with an external 4-port mux or + * port@2 with the internal 2-port mux. + */ + ret = drm_of_find_panel_or_bridge(child, + imx_ldb->lvds_mux ? 4 : 2, 0, + &channel->panel, &channel->bridge); + if (ret && ret != -ENODEV) + goto free_child; + + /* panel ddc only if there is no bridge */ + if (!channel->bridge) { + ret = imx_ldb_panel_ddc(dev, channel, child); + if (ret) + goto free_child; + } + + bus_format = of_get_bus_format(dev, child); + if (bus_format == -EINVAL) { + /* + * If no bus format was specified in the device tree, + * we can still get it from the connected panel later. + */ + if (channel->panel && channel->panel->funcs && + channel->panel->funcs->get_modes) + bus_format = 0; + } + if (bus_format < 0) { + dev_err(dev, "could not determine data mapping: %d\n", + bus_format); + ret = bus_format; + goto free_child; + } + channel->bus_format = bus_format; + channel->child = child; + + ret = imx_ldb_register(drm, channel); + if (ret) { + channel->child = NULL; + goto free_child; + } + } + + return 0; + +free_child: + of_node_put(child); + return ret; +} + +static void imx_ldb_unbind(struct device *dev, struct device *master, + void *data) +{ + struct imx_ldb *imx_ldb = dev_get_drvdata(dev); + int i; + + for (i = 0; i < 2; i++) { + struct imx_ldb_channel *channel = &imx_ldb->channel[i]; + + kfree(channel->edid); + i2c_put_adapter(channel->ddc); + } +} + +static const struct component_ops imx_ldb_ops = { + .bind = imx_ldb_bind, + .unbind = imx_ldb_unbind, +}; + +static int imx_ldb_probe(struct platform_device *pdev) +{ + struct imx_ldb *imx_ldb; + + imx_ldb = devm_kzalloc(&pdev->dev, sizeof(*imx_ldb), GFP_KERNEL); + if (!imx_ldb) + return -ENOMEM; + + platform_set_drvdata(pdev, imx_ldb); + + return component_add(&pdev->dev, &imx_ldb_ops); +} + +static int imx_ldb_remove(struct platform_device *pdev) +{ + component_del(&pdev->dev, &imx_ldb_ops); + return 0; +} + +static struct platform_driver imx_ldb_driver = { + .probe = imx_ldb_probe, + .remove = imx_ldb_remove, + .driver = { + .of_match_table = imx_ldb_dt_ids, + .name = DRIVER_NAME, + }, +}; + +module_platform_driver(imx_ldb_driver); + +MODULE_DESCRIPTION("i.MX LVDS driver"); +MODULE_AUTHOR("Sascha Hauer, Pengutronix"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRIVER_NAME); |