Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

8 files changed, 4047 insertions, 0 deletions

diff --git a/drivers/gpu/drm/mcde/Kconfig b/drivers/gpu/drm/mcde/Kconfig
new file mode 100644
index 000000000..b39901265
--- /dev/null
+++ b/drivers/gpu/drm/mcde/Kconfig
@@ -0,0 +1,18 @@
+config DRM_MCDE
+	tristate "DRM Support for ST-Ericsson MCDE (Multichannel Display Engine)"
+	depends on DRM
+	depends on CMA
+	depends on ARM || COMPILE_TEST
+	depends on OF
+	select MFD_SYSCON
+	select DRM_MIPI_DSI
+	select DRM_BRIDGE
+	select DRM_PANEL_BRIDGE
+	select DRM_KMS_HELPER
+	select DRM_KMS_CMA_HELPER
+	select DRM_GEM_CMA_HELPER
+	select VT_HW_CONSOLE_BINDING if FRAMEBUFFER_CONSOLE
+	help
+	  Choose this option for DRM support for the ST-Ericsson MCDE
+	  Multi-Channel Display Engine.
+	  If M is selected the module will be called mcde_drm.
diff --git a/drivers/gpu/drm/mcde/Makefile b/drivers/gpu/drm/mcde/Makefile
new file mode 100644
index 000000000..fe28f4e0f
--- /dev/null
+++ b/drivers/gpu/drm/mcde/Makefile
@@ -0,0 +1,3 @@
+mcde_drm-y +=	mcde_drv.o mcde_dsi.o mcde_display.o
+
+obj-$(CONFIG_DRM_MCDE) += mcde_drm.o
diff --git a/drivers/gpu/drm/mcde/mcde_display.c b/drivers/gpu/drm/mcde/mcde_display.c
new file mode 100644
index 000000000..c271e5bf0
--- /dev/null
+++ b/drivers/gpu/drm/mcde/mcde_display.c
@@ -0,0 +1,1274 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Linus Walleij <linus.walleij@linaro.org>
+ * Parts of this file were based on the MCDE driver by Marcus Lorentzon
+ * (C) ST-Ericsson SA 2013
+ */
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/dma-buf.h>
+#include <linux/regulator/consumer.h>
+
+#include <drm/drm_device.h>
+#include <drm/drm_fb_cma_helper.h>
+#include <drm/drm_fourcc.h>
+#include <drm/drm_gem_cma_helper.h>
+#include <drm/drm_gem_framebuffer_helper.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_simple_kms_helper.h>
+#include <drm/drm_vblank.h>
+#include <video/mipi_display.h>
+
+#include "mcde_drm.h"
+#include "mcde_display_regs.h"
+
+enum mcde_fifo {
+	MCDE_FIFO_A,
+	MCDE_FIFO_B,
+	/* TODO: implement FIFO C0 and FIFO C1 */
+};
+
+enum mcde_channel {
+	MCDE_CHANNEL_0 = 0,
+	MCDE_CHANNEL_1,
+	MCDE_CHANNEL_2,
+	MCDE_CHANNEL_3,
+};
+
+enum mcde_extsrc {
+	MCDE_EXTSRC_0 = 0,
+	MCDE_EXTSRC_1,
+	MCDE_EXTSRC_2,
+	MCDE_EXTSRC_3,
+	MCDE_EXTSRC_4,
+	MCDE_EXTSRC_5,
+	MCDE_EXTSRC_6,
+	MCDE_EXTSRC_7,
+	MCDE_EXTSRC_8,
+	MCDE_EXTSRC_9,
+};
+
+enum mcde_overlay {
+	MCDE_OVERLAY_0 = 0,
+	MCDE_OVERLAY_1,
+	MCDE_OVERLAY_2,
+	MCDE_OVERLAY_3,
+	MCDE_OVERLAY_4,
+	MCDE_OVERLAY_5,
+};
+
+enum mcde_dsi_formatter {
+	MCDE_DSI_FORMATTER_0 = 0,
+	MCDE_DSI_FORMATTER_1,
+	MCDE_DSI_FORMATTER_2,
+};
+
+void mcde_display_irq(struct mcde *mcde)
+{
+	u32 mispp, misovl, mischnl;
+	bool vblank = false;
+
+	/* Handle display IRQs */
+	mispp = readl(mcde->regs + MCDE_MISPP);
+	misovl = readl(mcde->regs + MCDE_MISOVL);
+	mischnl = readl(mcde->regs + MCDE_MISCHNL);
+
+	/*
+	 * Handle IRQs from the DSI link. All IRQs from the DSI links
+	 * are just latched onto the MCDE IRQ line, so we need to traverse
+	 * any active DSI masters and check if an IRQ is originating from
+	 * them.
+	 *
+	 * TODO: Currently only one DSI link is supported.
+	 */
+	if (mcde_dsi_irq(mcde->mdsi)) {
+		u32 val;
+
+		/*
+		 * In oneshot mode we do not send continuous updates
+		 * to the display, instead we only push out updates when
+		 * the update function is called, then we disable the
+		 * flow on the channel once we get the TE IRQ.
+		 */
+		if (mcde->flow_mode == MCDE_COMMAND_ONESHOT_FLOW) {
+			spin_lock(&mcde->flow_lock);
+			if (--mcde->flow_active == 0) {
+				dev_dbg(mcde->dev, "TE0 IRQ\n");
+				/* Disable FIFO A flow */
+				val = readl(mcde->regs + MCDE_CRA0);
+				val &= ~MCDE_CRX0_FLOEN;
+				writel(val, mcde->regs + MCDE_CRA0);
+			}
+			spin_unlock(&mcde->flow_lock);
+		}
+	}
+
+	/* Vblank from one of the channels */
+	if (mispp & MCDE_PP_VCMPA) {
+		dev_dbg(mcde->dev, "chnl A vblank IRQ\n");
+		vblank = true;
+	}
+	if (mispp & MCDE_PP_VCMPB) {
+		dev_dbg(mcde->dev, "chnl B vblank IRQ\n");
+		vblank = true;
+	}
+	if (mispp & MCDE_PP_VCMPC0)
+		dev_dbg(mcde->dev, "chnl C0 vblank IRQ\n");
+	if (mispp & MCDE_PP_VCMPC1)
+		dev_dbg(mcde->dev, "chnl C1 vblank IRQ\n");
+	if (mispp & MCDE_PP_VSCC0)
+		dev_dbg(mcde->dev, "chnl C0 TE IRQ\n");
+	if (mispp & MCDE_PP_VSCC1)
+		dev_dbg(mcde->dev, "chnl C1 TE IRQ\n");
+	writel(mispp, mcde->regs + MCDE_RISPP);
+
+	if (vblank)
+		drm_crtc_handle_vblank(&mcde->pipe.crtc);
+
+	if (misovl)
+		dev_info(mcde->dev, "some stray overlay IRQ %08x\n", misovl);
+	writel(misovl, mcde->regs + MCDE_RISOVL);
+
+	if (mischnl)
+		dev_info(mcde->dev, "some stray channel error IRQ %08x\n",
+			 mischnl);
+	writel(mischnl, mcde->regs + MCDE_RISCHNL);
+}
+
+void mcde_display_disable_irqs(struct mcde *mcde)
+{
+	/* Disable all IRQs */
+	writel(0, mcde->regs + MCDE_IMSCPP);
+	writel(0, mcde->regs + MCDE_IMSCOVL);
+	writel(0, mcde->regs + MCDE_IMSCCHNL);
+
+	/* Clear any pending IRQs */
+	writel(0xFFFFFFFF, mcde->regs + MCDE_RISPP);
+	writel(0xFFFFFFFF, mcde->regs + MCDE_RISOVL);
+	writel(0xFFFFFFFF, mcde->regs + MCDE_RISCHNL);
+}
+
+static int mcde_display_check(struct drm_simple_display_pipe *pipe,
+			      struct drm_plane_state *pstate,
+			      struct drm_crtc_state *cstate)
+{
+	const struct drm_display_mode *mode = &cstate->mode;
+	struct drm_framebuffer *old_fb = pipe->plane.state->fb;
+	struct drm_framebuffer *fb = pstate->fb;
+
+	if (fb) {
+		u32 offset = drm_fb_cma_get_gem_addr(fb, pstate, 0);
+
+		/* FB base address must be dword aligned. */
+		if (offset & 3) {
+			DRM_DEBUG_KMS("FB not 32-bit aligned\n");
+			return -EINVAL;
+		}
+
+		/*
+		 * There's no pitch register, the mode's hdisplay
+		 * controls this.
+		 */
+		if (fb->pitches[0] != mode->hdisplay * fb->format->cpp[0]) {
+			DRM_DEBUG_KMS("can't handle pitches\n");
+			return -EINVAL;
+		}
+
+		/*
+		 * We can't change the FB format in a flicker-free
+		 * manner (and only update it during CRTC enable).
+		 */
+		if (old_fb && old_fb->format != fb->format)
+			cstate->mode_changed = true;
+	}
+
+	return 0;
+}
+
+static int mcde_configure_extsrc(struct mcde *mcde, enum mcde_extsrc src,
+				 u32 format)
+{
+	u32 val;
+	u32 conf;
+	u32 cr;
+
+	switch (src) {
+	case MCDE_EXTSRC_0:
+		conf = MCDE_EXTSRC0CONF;
+		cr = MCDE_EXTSRC0CR;
+		break;
+	case MCDE_EXTSRC_1:
+		conf = MCDE_EXTSRC1CONF;
+		cr = MCDE_EXTSRC1CR;
+		break;
+	case MCDE_EXTSRC_2:
+		conf = MCDE_EXTSRC2CONF;
+		cr = MCDE_EXTSRC2CR;
+		break;
+	case MCDE_EXTSRC_3:
+		conf = MCDE_EXTSRC3CONF;
+		cr = MCDE_EXTSRC3CR;
+		break;
+	case MCDE_EXTSRC_4:
+		conf = MCDE_EXTSRC4CONF;
+		cr = MCDE_EXTSRC4CR;
+		break;
+	case MCDE_EXTSRC_5:
+		conf = MCDE_EXTSRC5CONF;
+		cr = MCDE_EXTSRC5CR;
+		break;
+	case MCDE_EXTSRC_6:
+		conf = MCDE_EXTSRC6CONF;
+		cr = MCDE_EXTSRC6CR;
+		break;
+	case MCDE_EXTSRC_7:
+		conf = MCDE_EXTSRC7CONF;
+		cr = MCDE_EXTSRC7CR;
+		break;
+	case MCDE_EXTSRC_8:
+		conf = MCDE_EXTSRC8CONF;
+		cr = MCDE_EXTSRC8CR;
+		break;
+	case MCDE_EXTSRC_9:
+		conf = MCDE_EXTSRC9CONF;
+		cr = MCDE_EXTSRC9CR;
+		break;
+	}
+
+	/*
+	 * Configure external source 0 one buffer (buffer 0)
+	 * primary overlay ID 0.
+	 * From mcde_hw.c ovly_update_registers() in the vendor tree
+	 */
+	val = 0 << MCDE_EXTSRCXCONF_BUF_ID_SHIFT;
+	val |= 1 << MCDE_EXTSRCXCONF_BUF_NB_SHIFT;
+	val |= 0 << MCDE_EXTSRCXCONF_PRI_OVLID_SHIFT;
+	/*
+	 * MCDE has inverse semantics from DRM on RBG/BGR which is why
+	 * all the modes are inversed here.
+	 */
+	switch (format) {
+	case DRM_FORMAT_ARGB8888:
+		val |= MCDE_EXTSRCXCONF_BPP_ARGB8888 <<
+			MCDE_EXTSRCXCONF_BPP_SHIFT;
+		val |= MCDE_EXTSRCXCONF_BGR;
+		break;
+	case DRM_FORMAT_ABGR8888:
+		val |= MCDE_EXTSRCXCONF_BPP_ARGB8888 <<
+			MCDE_EXTSRCXCONF_BPP_SHIFT;
+		break;
+	case DRM_FORMAT_XRGB8888:
+		val |= MCDE_EXTSRCXCONF_BPP_XRGB8888 <<
+			MCDE_EXTSRCXCONF_BPP_SHIFT;
+		val |= MCDE_EXTSRCXCONF_BGR;
+		break;
+	case DRM_FORMAT_XBGR8888:
+		val |= MCDE_EXTSRCXCONF_BPP_XRGB8888 <<
+			MCDE_EXTSRCXCONF_BPP_SHIFT;
+		break;
+	case DRM_FORMAT_RGB888:
+		val |= MCDE_EXTSRCXCONF_BPP_RGB888 <<
+			MCDE_EXTSRCXCONF_BPP_SHIFT;
+		val |= MCDE_EXTSRCXCONF_BGR;
+		break;
+	case DRM_FORMAT_BGR888:
+		val |= MCDE_EXTSRCXCONF_BPP_RGB888 <<
+			MCDE_EXTSRCXCONF_BPP_SHIFT;
+		break;
+	case DRM_FORMAT_ARGB4444:
+		val |= MCDE_EXTSRCXCONF_BPP_ARGB4444 <<
+			MCDE_EXTSRCXCONF_BPP_SHIFT;
+		val |= MCDE_EXTSRCXCONF_BGR;
+		break;
+	case DRM_FORMAT_ABGR4444:
+		val |= MCDE_EXTSRCXCONF_BPP_ARGB4444 <<
+			MCDE_EXTSRCXCONF_BPP_SHIFT;
+		break;
+	case DRM_FORMAT_XRGB4444:
+		val |= MCDE_EXTSRCXCONF_BPP_RGB444 <<
+			MCDE_EXTSRCXCONF_BPP_SHIFT;
+		val |= MCDE_EXTSRCXCONF_BGR;
+		break;
+	case DRM_FORMAT_XBGR4444:
+		val |= MCDE_EXTSRCXCONF_BPP_RGB444 <<
+			MCDE_EXTSRCXCONF_BPP_SHIFT;
+		break;
+	case DRM_FORMAT_XRGB1555:
+		val |= MCDE_EXTSRCXCONF_BPP_IRGB1555 <<
+			MCDE_EXTSRCXCONF_BPP_SHIFT;
+		val |= MCDE_EXTSRCXCONF_BGR;
+		break;
+	case DRM_FORMAT_XBGR1555:
+		val |= MCDE_EXTSRCXCONF_BPP_IRGB1555 <<
+			MCDE_EXTSRCXCONF_BPP_SHIFT;
+		break;
+	case DRM_FORMAT_RGB565:
+		val |= MCDE_EXTSRCXCONF_BPP_RGB565 <<
+			MCDE_EXTSRCXCONF_BPP_SHIFT;
+		val |= MCDE_EXTSRCXCONF_BGR;
+		break;
+	case DRM_FORMAT_BGR565:
+		val |= MCDE_EXTSRCXCONF_BPP_RGB565 <<
+			MCDE_EXTSRCXCONF_BPP_SHIFT;
+		break;
+	case DRM_FORMAT_YUV422:
+		val |= MCDE_EXTSRCXCONF_BPP_YCBCR422 <<
+			MCDE_EXTSRCXCONF_BPP_SHIFT;
+		break;
+	default:
+		dev_err(mcde->dev, "Unknown pixel format 0x%08x\n",
+			format);
+		return -EINVAL;
+	}
+	writel(val, mcde->regs + conf);
+
+	/* Software select, primary */
+	val = MCDE_EXTSRCXCR_SEL_MOD_SOFTWARE_SEL;
+	val |= MCDE_EXTSRCXCR_MULTIOVL_CTRL_PRIMARY;
+	writel(val, mcde->regs + cr);
+
+	return 0;
+}
+
+static void mcde_configure_overlay(struct mcde *mcde, enum mcde_overlay ovl,
+				   enum mcde_extsrc src,
+				   enum mcde_channel ch,
+				   const struct drm_display_mode *mode,
+				   u32 format, int cpp)
+{
+	u32 val;
+	u32 conf1;
+	u32 conf2;
+	u32 crop;
+	u32 ljinc;
+	u32 cr;
+	u32 comp;
+	u32 pixel_fetcher_watermark;
+
+	switch (ovl) {
+	case MCDE_OVERLAY_0:
+		conf1 = MCDE_OVL0CONF;
+		conf2 = MCDE_OVL0CONF2;
+		crop = MCDE_OVL0CROP;
+		ljinc = MCDE_OVL0LJINC;
+		cr = MCDE_OVL0CR;
+		comp = MCDE_OVL0COMP;
+		break;
+	case MCDE_OVERLAY_1:
+		conf1 = MCDE_OVL1CONF;
+		conf2 = MCDE_OVL1CONF2;
+		crop = MCDE_OVL1CROP;
+		ljinc = MCDE_OVL1LJINC;
+		cr = MCDE_OVL1CR;
+		comp = MCDE_OVL1COMP;
+		break;
+	case MCDE_OVERLAY_2:
+		conf1 = MCDE_OVL2CONF;
+		conf2 = MCDE_OVL2CONF2;
+		crop = MCDE_OVL2CROP;
+		ljinc = MCDE_OVL2LJINC;
+		cr = MCDE_OVL2CR;
+		comp = MCDE_OVL2COMP;
+		break;
+	case MCDE_OVERLAY_3:
+		conf1 = MCDE_OVL3CONF;
+		conf2 = MCDE_OVL3CONF2;
+		crop = MCDE_OVL3CROP;
+		ljinc = MCDE_OVL3LJINC;
+		cr = MCDE_OVL3CR;
+		comp = MCDE_OVL3COMP;
+		break;
+	case MCDE_OVERLAY_4:
+		conf1 = MCDE_OVL4CONF;
+		conf2 = MCDE_OVL4CONF2;
+		crop = MCDE_OVL4CROP;
+		ljinc = MCDE_OVL4LJINC;
+		cr = MCDE_OVL4CR;
+		comp = MCDE_OVL4COMP;
+		break;
+	case MCDE_OVERLAY_5:
+		conf1 = MCDE_OVL5CONF;
+		conf2 = MCDE_OVL5CONF2;
+		crop = MCDE_OVL5CROP;
+		ljinc = MCDE_OVL5LJINC;
+		cr = MCDE_OVL5CR;
+		comp = MCDE_OVL5COMP;
+		break;
+	}
+
+	val = mode->hdisplay << MCDE_OVLXCONF_PPL_SHIFT;
+	val |= mode->vdisplay << MCDE_OVLXCONF_LPF_SHIFT;
+	/* Use external source 0 that we just configured */
+	val |= src << MCDE_OVLXCONF_EXTSRC_ID_SHIFT;
+	writel(val, mcde->regs + conf1);
+
+	val = MCDE_OVLXCONF2_BP_PER_PIXEL_ALPHA;
+	val |= 0xff << MCDE_OVLXCONF2_ALPHAVALUE_SHIFT;
+	/* OPQ: overlay is opaque */
+	switch (format) {
+	case DRM_FORMAT_ARGB8888:
+	case DRM_FORMAT_ABGR8888:
+	case DRM_FORMAT_ARGB4444:
+	case DRM_FORMAT_ABGR4444:
+	case DRM_FORMAT_XRGB1555:
+	case DRM_FORMAT_XBGR1555:
+		/* No OPQ */
+		break;
+	case DRM_FORMAT_XRGB8888:
+	case DRM_FORMAT_XBGR8888:
+	case DRM_FORMAT_RGB888:
+	case DRM_FORMAT_BGR888:
+	case DRM_FORMAT_RGB565:
+	case DRM_FORMAT_BGR565:
+	case DRM_FORMAT_YUV422:
+		val |= MCDE_OVLXCONF2_OPQ;
+		break;
+	default:
+		dev_err(mcde->dev, "Unknown pixel format 0x%08x\n",
+			format);
+		break;
+	}
+
+	/*
+	 * Pixel fetch watermark level is max 0x1FFF pixels.
+	 * Two basic rules should be followed:
+	 * 1. The value should be at least 256 bits.
+	 * 2. The sum of all active overlays pixelfetch watermark level
+	 *    multiplied with bits per pixel, should be lower than the
+	 *    size of input_fifo_size in bits.
+	 * 3. The value should be a multiple of a line (256 bits).
+	 */
+	switch (cpp) {
+	case 2:
+		pixel_fetcher_watermark = 128;
+		break;
+	case 3:
+		pixel_fetcher_watermark = 96;
+		break;
+	case 4:
+		pixel_fetcher_watermark = 48;
+		break;
+	default:
+		pixel_fetcher_watermark = 48;
+		break;
+	}
+	dev_dbg(mcde->dev, "pixel fetcher watermark level %d pixels\n",
+		pixel_fetcher_watermark);
+	val |= pixel_fetcher_watermark << MCDE_OVLXCONF2_PIXELFETCHERWATERMARKLEVEL_SHIFT;
+	writel(val, mcde->regs + conf2);
+
+	/* Number of bytes to fetch per line */
+	writel(mcde->stride, mcde->regs + ljinc);
+	/* No cropping */
+	writel(0, mcde->regs + crop);
+
+	/* Set up overlay control register */
+	val = MCDE_OVLXCR_OVLEN;
+	val |= MCDE_OVLXCR_COLCCTRL_DISABLED;
+	val |= MCDE_OVLXCR_BURSTSIZE_8W <<
+		MCDE_OVLXCR_BURSTSIZE_SHIFT;
+	val |= MCDE_OVLXCR_MAXOUTSTANDING_8_REQ <<
+		MCDE_OVLXCR_MAXOUTSTANDING_SHIFT;
+	/* Not using rotation but set it up anyways */
+	val |= MCDE_OVLXCR_ROTBURSTSIZE_8W <<
+		MCDE_OVLXCR_ROTBURSTSIZE_SHIFT;
+	writel(val, mcde->regs + cr);
+
+	/*
+	 * Set up the overlay compositor to route the overlay out to
+	 * the desired channel
+	 */
+	val = ch << MCDE_OVLXCOMP_CH_ID_SHIFT;
+	writel(val, mcde->regs + comp);
+}
+
+static void mcde_configure_channel(struct mcde *mcde, enum mcde_channel ch,
+				   enum mcde_fifo fifo,
+				   const struct drm_display_mode *mode)
+{
+	u32 val;
+	u32 conf;
+	u32 sync;
+	u32 stat;
+	u32 bgcol;
+	u32 mux;
+
+	switch (ch) {
+	case MCDE_CHANNEL_0:
+		conf = MCDE_CHNL0CONF;
+		sync = MCDE_CHNL0SYNCHMOD;
+		stat = MCDE_CHNL0STAT;
+		bgcol = MCDE_CHNL0BCKGNDCOL;
+		mux = MCDE_CHNL0MUXING;
+		break;
+	case MCDE_CHANNEL_1:
+		conf = MCDE_CHNL1CONF;
+		sync = MCDE_CHNL1SYNCHMOD;
+		stat = MCDE_CHNL1STAT;
+		bgcol = MCDE_CHNL1BCKGNDCOL;
+		mux = MCDE_CHNL1MUXING;
+		break;
+	case MCDE_CHANNEL_2:
+		conf = MCDE_CHNL2CONF;
+		sync = MCDE_CHNL2SYNCHMOD;
+		stat = MCDE_CHNL2STAT;
+		bgcol = MCDE_CHNL2BCKGNDCOL;
+		mux = MCDE_CHNL2MUXING;
+		break;
+	case MCDE_CHANNEL_3:
+		conf = MCDE_CHNL3CONF;
+		sync = MCDE_CHNL3SYNCHMOD;
+		stat = MCDE_CHNL3STAT;
+		bgcol = MCDE_CHNL3BCKGNDCOL;
+		mux = MCDE_CHNL3MUXING;
+		return;
+	}
+
+	/* Set up channel 0 sync (based on chnl_update_registers()) */
+	switch (mcde->flow_mode) {
+	case MCDE_COMMAND_ONESHOT_FLOW:
+		/* Oneshot is achieved with software sync */
+		val = MCDE_CHNLXSYNCHMOD_SRC_SYNCH_SOFTWARE
+			<< MCDE_CHNLXSYNCHMOD_SRC_SYNCH_SHIFT;
+		break;
+	case MCDE_COMMAND_TE_FLOW:
+		val = MCDE_CHNLXSYNCHMOD_SRC_SYNCH_HARDWARE
+			<< MCDE_CHNLXSYNCHMOD_SRC_SYNCH_SHIFT;
+		val |= MCDE_CHNLXSYNCHMOD_OUT_SYNCH_SRC_TE0
+			<< MCDE_CHNLXSYNCHMOD_OUT_SYNCH_SRC_SHIFT;
+		break;
+	case MCDE_COMMAND_BTA_TE_FLOW:
+		val = MCDE_CHNLXSYNCHMOD_SRC_SYNCH_HARDWARE
+			<< MCDE_CHNLXSYNCHMOD_SRC_SYNCH_SHIFT;
+		/*
+		 * TODO:
+		 * The vendor driver uses the formatter as sync source
+		 * for BTA TE mode. Test to use TE if you have a panel
+		 * that uses this mode.
+		 */
+		val |= MCDE_CHNLXSYNCHMOD_OUT_SYNCH_SRC_FORMATTER
+			<< MCDE_CHNLXSYNCHMOD_OUT_SYNCH_SRC_SHIFT;
+		break;
+	case MCDE_VIDEO_TE_FLOW:
+		val = MCDE_CHNLXSYNCHMOD_SRC_SYNCH_HARDWARE
+			<< MCDE_CHNLXSYNCHMOD_SRC_SYNCH_SHIFT;
+		val |= MCDE_CHNLXSYNCHMOD_OUT_SYNCH_SRC_TE0
+			<< MCDE_CHNLXSYNCHMOD_OUT_SYNCH_SRC_SHIFT;
+		break;
+	case MCDE_VIDEO_FORMATTER_FLOW:
+		val = MCDE_CHNLXSYNCHMOD_SRC_SYNCH_HARDWARE
+			<< MCDE_CHNLXSYNCHMOD_SRC_SYNCH_SHIFT;
+		val |= MCDE_CHNLXSYNCHMOD_OUT_SYNCH_SRC_FORMATTER
+			<< MCDE_CHNLXSYNCHMOD_OUT_SYNCH_SRC_SHIFT;
+		break;
+	default:
+		dev_err(mcde->dev, "unknown flow mode %d\n",
+			mcde->flow_mode);
+		break;
+	}
+
+	writel(val, mcde->regs + sync);
+
+	/* Set up pixels per line and lines per frame */
+	val = (mode->hdisplay - 1) << MCDE_CHNLXCONF_PPL_SHIFT;
+	val |= (mode->vdisplay - 1) << MCDE_CHNLXCONF_LPF_SHIFT;
+	writel(val, mcde->regs + conf);
+
+	/*
+	 * Normalize color conversion:
+	 * black background, OLED conversion disable on channel
+	 */
+	val = MCDE_CHNLXSTAT_CHNLBLBCKGND_EN |
+		MCDE_CHNLXSTAT_CHNLRD;
+	writel(val, mcde->regs + stat);
+	writel(0, mcde->regs + bgcol);
+
+	/* Set up muxing: connect the channel to the desired FIFO */
+	switch (fifo) {
+	case MCDE_FIFO_A:
+		writel(MCDE_CHNLXMUXING_FIFO_ID_FIFO_A,
+		       mcde->regs + mux);
+		break;
+	case MCDE_FIFO_B:
+		writel(MCDE_CHNLXMUXING_FIFO_ID_FIFO_B,
+		       mcde->regs + mux);
+		break;
+	}
+}
+
+static void mcde_configure_fifo(struct mcde *mcde, enum mcde_fifo fifo,
+				enum mcde_dsi_formatter fmt,
+				int fifo_wtrmrk)
+{
+	u32 val;
+	u32 ctrl;
+	u32 cr0, cr1;
+
+	switch (fifo) {
+	case MCDE_FIFO_A:
+		ctrl = MCDE_CTRLA;
+		cr0 = MCDE_CRA0;
+		cr1 = MCDE_CRA1;
+		break;
+	case MCDE_FIFO_B:
+		ctrl = MCDE_CTRLB;
+		cr0 = MCDE_CRB0;
+		cr1 = MCDE_CRB1;
+		break;
+	}
+
+	val = fifo_wtrmrk << MCDE_CTRLX_FIFOWTRMRK_SHIFT;
+	/* We only support DSI formatting for now */
+	val |= MCDE_CTRLX_FORMTYPE_DSI <<
+		MCDE_CTRLX_FORMTYPE_SHIFT;
+
+	/* Select the formatter to use for this FIFO */
+	val |= fmt << MCDE_CTRLX_FORMID_SHIFT;
+	writel(val, mcde->regs + ctrl);
+
+	/* Blend source with Alpha 0xff on FIFO */
+	val = MCDE_CRX0_BLENDEN |
+		0xff << MCDE_CRX0_ALPHABLEND_SHIFT;
+	writel(val, mcde->regs + cr0);
+
+	/* Set-up from mcde_fmtr_dsi.c, fmtr_dsi_enable_video() */
+
+	/* Use the MCDE clock for this FIFO */
+	val = MCDE_CRX1_CLKSEL_MCDECLK << MCDE_CRX1_CLKSEL_SHIFT;
+
+	/* TODO: when adding DPI support add OUTBPP etc here */
+	writel(val, mcde->regs + cr1);
+};
+
+static void mcde_configure_dsi_formatter(struct mcde *mcde,
+					 enum mcde_dsi_formatter fmt,
+					 u32 formatter_frame,
+					 int pkt_size)
+{
+	u32 val;
+	u32 conf0;
+	u32 frame;
+	u32 pkt;
+	u32 sync;
+	u32 cmdw;
+	u32 delay0, delay1;
+
+	switch (fmt) {
+	case MCDE_DSI_FORMATTER_0:
+		conf0 = MCDE_DSIVID0CONF0;
+		frame = MCDE_DSIVID0FRAME;
+		pkt = MCDE_DSIVID0PKT;
+		sync = MCDE_DSIVID0SYNC;
+		cmdw = MCDE_DSIVID0CMDW;
+		delay0 = MCDE_DSIVID0DELAY0;
+		delay1 = MCDE_DSIVID0DELAY1;
+		break;
+	case MCDE_DSI_FORMATTER_1:
+		conf0 = MCDE_DSIVID1CONF0;
+		frame = MCDE_DSIVID1FRAME;
+		pkt = MCDE_DSIVID1PKT;
+		sync = MCDE_DSIVID1SYNC;
+		cmdw = MCDE_DSIVID1CMDW;
+		delay0 = MCDE_DSIVID1DELAY0;
+		delay1 = MCDE_DSIVID1DELAY1;
+		break;
+	case MCDE_DSI_FORMATTER_2:
+		conf0 = MCDE_DSIVID2CONF0;
+		frame = MCDE_DSIVID2FRAME;
+		pkt = MCDE_DSIVID2PKT;
+		sync = MCDE_DSIVID2SYNC;
+		cmdw = MCDE_DSIVID2CMDW;
+		delay0 = MCDE_DSIVID2DELAY0;
+		delay1 = MCDE_DSIVID2DELAY1;
+		break;
+	}
+
+	/*
+	 * Enable formatter
+	 * 8 bit commands and DCS commands (notgen = not generic)
+	 */
+	val = MCDE_DSICONF0_CMD8 | MCDE_DSICONF0_DCSVID_NOTGEN;
+	if (mcde->mdsi->mode_flags & MIPI_DSI_MODE_VIDEO)
+		val |= MCDE_DSICONF0_VID_MODE_VID;
+	switch (mcde->mdsi->format) {
+	case MIPI_DSI_FMT_RGB888:
+		val |= MCDE_DSICONF0_PACKING_RGB888 <<
+			MCDE_DSICONF0_PACKING_SHIFT;
+		break;
+	case MIPI_DSI_FMT_RGB666:
+		val |= MCDE_DSICONF0_PACKING_RGB666 <<
+			MCDE_DSICONF0_PACKING_SHIFT;
+		break;
+	case MIPI_DSI_FMT_RGB666_PACKED:
+		val |= MCDE_DSICONF0_PACKING_RGB666_PACKED <<
+			MCDE_DSICONF0_PACKING_SHIFT;
+		break;
+	case MIPI_DSI_FMT_RGB565:
+		val |= MCDE_DSICONF0_PACKING_RGB565 <<
+			MCDE_DSICONF0_PACKING_SHIFT;
+		break;
+	default:
+		dev_err(mcde->dev, "unknown DSI format\n");
+		return;
+	}
+	writel(val, mcde->regs + conf0);
+
+	writel(formatter_frame, mcde->regs + frame);
+	writel(pkt_size, mcde->regs + pkt);
+	writel(0, mcde->regs + sync);
+	/* Define the MIPI command: we want to write into display memory */
+	val = MIPI_DCS_WRITE_MEMORY_CONTINUE <<
+		MCDE_DSIVIDXCMDW_CMDW_CONTINUE_SHIFT;
+	val |= MIPI_DCS_WRITE_MEMORY_START <<
+		MCDE_DSIVIDXCMDW_CMDW_START_SHIFT;
+	writel(val, mcde->regs + cmdw);
+
+	/*
+	 * FIXME: the vendor driver has some hack around this value in
+	 * CMD mode with autotrig.
+	 */
+	writel(0, mcde->regs + delay0);
+	writel(0, mcde->regs + delay1);
+}
+
+static void mcde_enable_fifo(struct mcde *mcde, enum mcde_fifo fifo)
+{
+	u32 val;
+	u32 cr;
+
+	switch (fifo) {
+	case MCDE_FIFO_A:
+		cr = MCDE_CRA0;
+		break;
+	case MCDE_FIFO_B:
+		cr = MCDE_CRB0;
+		break;
+	default:
+		dev_err(mcde->dev, "cannot enable FIFO %c\n",
+			'A' + fifo);
+		return;
+	}
+
+	spin_lock(&mcde->flow_lock);
+	val = readl(mcde->regs + cr);
+	val |= MCDE_CRX0_FLOEN;
+	writel(val, mcde->regs + cr);
+	mcde->flow_active++;
+	spin_unlock(&mcde->flow_lock);
+}
+
+static void mcde_disable_fifo(struct mcde *mcde, enum mcde_fifo fifo,
+			      bool wait_for_drain)
+{
+	int timeout = 100;
+	u32 val;
+	u32 cr;
+
+	switch (fifo) {
+	case MCDE_FIFO_A:
+		cr = MCDE_CRA0;
+		break;
+	case MCDE_FIFO_B:
+		cr = MCDE_CRB0;
+		break;
+	default:
+		dev_err(mcde->dev, "cannot disable FIFO %c\n",
+			'A' + fifo);
+		return;
+	}
+
+	spin_lock(&mcde->flow_lock);
+	val = readl(mcde->regs + cr);
+	val &= ~MCDE_CRX0_FLOEN;
+	writel(val, mcde->regs + cr);
+	mcde->flow_active = 0;
+	spin_unlock(&mcde->flow_lock);
+
+	if (!wait_for_drain)
+		return;
+
+	/* Check that we really drained and stopped the flow */
+	while (readl(mcde->regs + cr) & MCDE_CRX0_FLOEN) {
+		usleep_range(1000, 1500);
+		if (!--timeout) {
+			dev_err(mcde->dev,
+				"FIFO timeout while clearing FIFO %c\n",
+				'A' + fifo);
+			return;
+		}
+	}
+}
+
+/*
+ * This drains a pipe i.e. a FIFO connected to a certain channel
+ */
+static void mcde_drain_pipe(struct mcde *mcde, enum mcde_fifo fifo,
+			    enum mcde_channel ch)
+{
+	u32 val;
+	u32 ctrl;
+	u32 synsw;
+
+	switch (fifo) {
+	case MCDE_FIFO_A:
+		ctrl = MCDE_CTRLA;
+		break;
+	case MCDE_FIFO_B:
+		ctrl = MCDE_CTRLB;
+		break;
+	}
+
+	switch (ch) {
+	case MCDE_CHANNEL_0:
+		synsw = MCDE_CHNL0SYNCHSW;
+		break;
+	case MCDE_CHANNEL_1:
+		synsw = MCDE_CHNL1SYNCHSW;
+		break;
+	case MCDE_CHANNEL_2:
+		synsw = MCDE_CHNL2SYNCHSW;
+		break;
+	case MCDE_CHANNEL_3:
+		synsw = MCDE_CHNL3SYNCHSW;
+		return;
+	}
+
+	val = readl(mcde->regs + ctrl);
+	if (!(val & MCDE_CTRLX_FIFOEMPTY)) {
+		dev_err(mcde->dev, "Channel A FIFO not empty (handover)\n");
+		/* Attempt to clear the FIFO */
+		mcde_enable_fifo(mcde, fifo);
+		/* Trigger a software sync out on respective channel (0-3) */
+		writel(MCDE_CHNLXSYNCHSW_SW_TRIG, mcde->regs + synsw);
+		/* Disable FIFO A flow again */
+		mcde_disable_fifo(mcde, fifo, true);
+	}
+}
+
+static int mcde_dsi_get_pkt_div(int ppl, int fifo_size)
+{
+	/*
+	 * DSI command mode line packets should be split into an even number of
+	 * packets smaller than or equal to the fifo size.
+	 */
+	int div;
+	const int max_div = DIV_ROUND_UP(MCDE_MAX_WIDTH, fifo_size);
+
+	for (div = 1; div < max_div; div++)
+		if (ppl % div == 0 && ppl / div <= fifo_size)
+			return div;
+	return 1;
+}
+
+static void mcde_display_enable(struct drm_simple_display_pipe *pipe,
+				struct drm_crtc_state *cstate,
+				struct drm_plane_state *plane_state)
+{
+	struct drm_crtc *crtc = &pipe->crtc;
+	struct drm_plane *plane = &pipe->plane;
+	struct drm_device *drm = crtc->dev;
+	struct mcde *mcde = to_mcde(drm);
+	const struct drm_display_mode *mode = &cstate->mode;
+	struct drm_framebuffer *fb = plane->state->fb;
+	u32 format = fb->format->format;
+	u32 formatter_ppl = mode->hdisplay; /* pixels per line */
+	u32 formatter_lpf = mode->vdisplay; /* lines per frame */
+	int pkt_size, fifo_wtrmrk;
+	int cpp = fb->format->cpp[0];
+	int formatter_cpp;
+	struct drm_format_name_buf tmp;
+	u32 formatter_frame;
+	u32 pkt_div;
+	u32 val;
+	int ret;
+
+	/* This powers up the entire MCDE block and the DSI hardware */
+	ret = regulator_enable(mcde->epod);
+	if (ret) {
+		dev_err(drm->dev, "can't re-enable EPOD regulator\n");
+		return;
+	}
+
+	dev_info(drm->dev, "enable MCDE, %d x %d format %s\n",
+		 mode->hdisplay, mode->vdisplay,
+		 drm_get_format_name(format, &tmp));
+	if (!mcde->mdsi) {
+		/* TODO: deal with this for non-DSI output */
+		dev_err(drm->dev, "no DSI master attached!\n");
+		return;
+	}
+
+	/* Set up the main control, watermark level at 7 */
+	val = 7 << MCDE_CONF0_IFIFOCTRLWTRMRKLVL_SHIFT;
+	/* 24 bits DPI: connect LSB Ch B to D[0:7] */
+	val |= 3 << MCDE_CONF0_OUTMUX0_SHIFT;
+	/* TV out: connect LSB Ch B to D[8:15] */
+	val |= 3 << MCDE_CONF0_OUTMUX1_SHIFT;
+	/* Don't care about this muxing */
+	val |= 0 << MCDE_CONF0_OUTMUX2_SHIFT;
+	/* 24 bits DPI: connect MID Ch B to D[24:31] */
+	val |= 4 << MCDE_CONF0_OUTMUX3_SHIFT;
+	/* 5: 24 bits DPI: connect MSB Ch B to D[32:39] */
+	val |= 5 << MCDE_CONF0_OUTMUX4_SHIFT;
+	/* Syncmux bits zero: DPI channel A and B on output pins A and B resp */
+	writel(val, mcde->regs + MCDE_CONF0);
+
+	/* Clear any pending interrupts */
+	mcde_display_disable_irqs(mcde);
+	writel(0, mcde->regs + MCDE_IMSCERR);
+	writel(0xFFFFFFFF, mcde->regs + MCDE_RISERR);
+
+	dev_info(drm->dev, "output in %s mode, format %dbpp\n",
+		 (mcde->mdsi->mode_flags & MIPI_DSI_MODE_VIDEO) ?
+		 "VIDEO" : "CMD",
+		 mipi_dsi_pixel_format_to_bpp(mcde->mdsi->format));
+	formatter_cpp =
+		mipi_dsi_pixel_format_to_bpp(mcde->mdsi->format) / 8;
+	dev_info(drm->dev, "overlay CPP %d bytes, DSI CPP %d bytes\n",
+		 cpp,
+		 formatter_cpp);
+
+	/* Calculations from mcde_fmtr_dsi.c, fmtr_dsi_enable_video() */
+
+	/*
+	 * Set up FIFO A watermark level:
+	 * 128 for LCD 32bpp video mode
+	 * 48  for LCD 32bpp command mode
+	 * 128 for LCD 16bpp video mode
+	 * 64  for LCD 16bpp command mode
+	 * 128 for HDMI 32bpp
+	 * 192 for HDMI 16bpp
+	 */
+	fifo_wtrmrk = mode->hdisplay;
+	if (mcde->mdsi->mode_flags & MIPI_DSI_MODE_VIDEO) {
+		fifo_wtrmrk = min(fifo_wtrmrk, 128);
+		pkt_div = 1;
+	} else {
+		fifo_wtrmrk = min(fifo_wtrmrk, 48);
+		/* The FIFO is 640 entries deep on this v3 hardware */
+		pkt_div = mcde_dsi_get_pkt_div(mode->hdisplay, 640);
+	}
+	dev_dbg(drm->dev, "FIFO watermark after flooring: %d bytes\n",
+		fifo_wtrmrk);
+	dev_dbg(drm->dev, "Packet divisor: %d bytes\n", pkt_div);
+
+	/* NOTE: pkt_div is 1 for video mode */
+	pkt_size = (formatter_ppl * formatter_cpp) / pkt_div;
+	/* Commands CMD8 need one extra byte */
+	if (!(mcde->mdsi->mode_flags & MIPI_DSI_MODE_VIDEO))
+		pkt_size++;
+
+	dev_dbg(drm->dev, "DSI packet size: %d * %d bytes per line\n",
+		pkt_size, pkt_div);
+	dev_dbg(drm->dev, "Overlay frame size: %u bytes\n",
+		mode->hdisplay * mode->vdisplay * cpp);
+	mcde->stride = mode->hdisplay * cpp;
+	dev_dbg(drm->dev, "Overlay line stride: %u bytes\n",
+		mcde->stride);
+	/* NOTE: pkt_div is 1 for video mode */
+	formatter_frame = pkt_size * pkt_div * formatter_lpf;
+	dev_dbg(drm->dev, "Formatter frame size: %u bytes\n", formatter_frame);
+
+	/* Drain the FIFO A + channel 0 pipe so we have a clean slate */
+	mcde_drain_pipe(mcde, MCDE_FIFO_A, MCDE_CHANNEL_0);
+
+	/*
+	 * We set up our display pipeline:
+	 * EXTSRC 0 -> OVERLAY 0 -> CHANNEL 0 -> FIFO A -> DSI FORMATTER 0
+	 *
+	 * First configure the external source (memory) on external source 0
+	 * using the desired bitstream/bitmap format
+	 */
+	mcde_configure_extsrc(mcde, MCDE_EXTSRC_0, format);
+
+	/*
+	 * Configure overlay 0 according to format and mode and take input
+	 * from external source 0 and route the output of this overlay to
+	 * channel 0
+	 */
+	mcde_configure_overlay(mcde, MCDE_OVERLAY_0, MCDE_EXTSRC_0,
+			       MCDE_CHANNEL_0, mode, format, cpp);
+
+	/*
+	 * Configure pixel-per-line and line-per-frame for channel 0 and then
+	 * route channel 0 to FIFO A
+	 */
+	mcde_configure_channel(mcde, MCDE_CHANNEL_0, MCDE_FIFO_A, mode);
+
+	/* Configure FIFO A to use DSI formatter 0 */
+	mcde_configure_fifo(mcde, MCDE_FIFO_A, MCDE_DSI_FORMATTER_0,
+			    fifo_wtrmrk);
+
+	/*
+	 * This brings up the DSI bridge which is tightly connected
+	 * to the MCDE DSI formatter.
+	 *
+	 * FIXME: if we want to use another formatter, such as DPI,
+	 * we need to be more elaborate here and select the appropriate
+	 * bridge.
+	 */
+	mcde_dsi_enable(mcde->bridge);
+
+	/* Configure the DSI formatter 0 for the DSI panel output */
+	mcde_configure_dsi_formatter(mcde, MCDE_DSI_FORMATTER_0,
+				     formatter_frame, pkt_size);
+
+	switch (mcde->flow_mode) {
+	case MCDE_COMMAND_TE_FLOW:
+	case MCDE_COMMAND_BTA_TE_FLOW:
+	case MCDE_VIDEO_TE_FLOW:
+		/* We are using TE in some comination */
+		if (mode->flags & DRM_MODE_FLAG_NVSYNC)
+			val = MCDE_VSCRC_VSPOL;
+		else
+			val = 0;
+		writel(val, mcde->regs + MCDE_VSCRC0);
+		/* Enable VSYNC capture on TE0 */
+		val = readl(mcde->regs + MCDE_CRC);
+		val |= MCDE_CRC_SYCEN0;
+		writel(val, mcde->regs + MCDE_CRC);
+		break;
+	default:
+		/* No TE capture */
+		break;
+	}
+
+	drm_crtc_vblank_on(crtc);
+
+	/*
+	 * If we're using oneshot mode we don't start the flow
+	 * until each time the display is given an update, and
+	 * then we disable it immediately after. For all other
+	 * modes (command or video) we start the FIFO flow
+	 * right here. This is necessary for the hardware to
+	 * behave right.
+	 */
+	if (mcde->flow_mode != MCDE_COMMAND_ONESHOT_FLOW) {
+		mcde_enable_fifo(mcde, MCDE_FIFO_A);
+		dev_dbg(mcde->dev, "started MCDE video FIFO flow\n");
+	}
+
+	/* Enable MCDE with automatic clock gating */
+	val = readl(mcde->regs + MCDE_CR);
+	val |= MCDE_CR_MCDEEN | MCDE_CR_AUTOCLKG_EN;
+	writel(val, mcde->regs + MCDE_CR);
+
+	dev_info(drm->dev, "MCDE display is enabled\n");
+}
+
+static void mcde_display_disable(struct drm_simple_display_pipe *pipe)
+{
+	struct drm_crtc *crtc = &pipe->crtc;
+	struct drm_device *drm = crtc->dev;
+	struct mcde *mcde = to_mcde(drm);
+	struct drm_pending_vblank_event *event;
+	int ret;
+
+	drm_crtc_vblank_off(crtc);
+
+	/* Disable FIFO A flow */
+	mcde_disable_fifo(mcde, MCDE_FIFO_A, true);
+
+	/* This disables the DSI bridge */
+	mcde_dsi_disable(mcde->bridge);
+
+	event = crtc->state->event;
+	if (event) {
+		crtc->state->event = NULL;
+
+		spin_lock_irq(&crtc->dev->event_lock);
+		drm_crtc_send_vblank_event(crtc, event);
+		spin_unlock_irq(&crtc->dev->event_lock);
+	}
+
+	ret = regulator_disable(mcde->epod);
+	if (ret)
+		dev_err(drm->dev, "can't disable EPOD regulator\n");
+	/* Make sure we are powered down (before we may power up again) */
+	usleep_range(50000, 70000);
+
+	dev_info(drm->dev, "MCDE display is disabled\n");
+}
+
+static void mcde_start_flow(struct mcde *mcde)
+{
+	/* Request a TE ACK only in TE+BTA mode */
+	if (mcde->flow_mode == MCDE_COMMAND_BTA_TE_FLOW)
+		mcde_dsi_te_request(mcde->mdsi);
+
+	/* Enable FIFO A flow */
+	mcde_enable_fifo(mcde, MCDE_FIFO_A);
+
+	/*
+	 * If oneshot mode is enabled, the flow will be disabled
+	 * when the TE0 IRQ arrives in the interrupt handler. Otherwise
+	 * updates are continuously streamed to the display after this
+	 * point.
+	 */
+
+	if (mcde->flow_mode == MCDE_COMMAND_ONESHOT_FLOW) {
+		/* Trigger a software sync out on channel 0 */
+		writel(MCDE_CHNLXSYNCHSW_SW_TRIG,
+		       mcde->regs + MCDE_CHNL0SYNCHSW);
+
+		/*
+		 * Disable FIFO A flow again: since we are using TE sync we
+		 * need to wait for the FIFO to drain before we continue
+		 * so repeated calls to this function will not cause a mess
+		 * in the hardware by pushing updates will updates are going
+		 * on already.
+		 */
+		mcde_disable_fifo(mcde, MCDE_FIFO_A, true);
+	}
+
+	dev_dbg(mcde->dev, "started MCDE FIFO flow\n");
+}
+
+static void mcde_set_extsrc(struct mcde *mcde, u32 buffer_address)
+{
+	/* Write bitmap base address to register */
+	writel(buffer_address, mcde->regs + MCDE_EXTSRCXA0);
+	/*
+	 * Base address for next line this is probably only used
+	 * in interlace modes.
+	 */
+	writel(buffer_address + mcde->stride, mcde->regs + MCDE_EXTSRCXA1);
+}
+
+static void mcde_display_update(struct drm_simple_display_pipe *pipe,
+				struct drm_plane_state *old_pstate)
+{
+	struct drm_crtc *crtc = &pipe->crtc;
+	struct drm_device *drm = crtc->dev;
+	struct mcde *mcde = to_mcde(drm);
+	struct drm_pending_vblank_event *event = crtc->state->event;
+	struct drm_plane *plane = &pipe->plane;
+	struct drm_plane_state *pstate = plane->state;
+	struct drm_framebuffer *fb = pstate->fb;
+
+	/*
+	 * Handle any pending event first, we need to arm the vblank
+	 * interrupt before sending any update to the display so we don't
+	 * miss the interrupt.
+	 */
+	if (event) {
+		crtc->state->event = NULL;
+
+		spin_lock_irq(&crtc->dev->event_lock);
+		/*
+		 * Hardware must be on before we can arm any vblank event,
+		 * this is not a scanout controller where there is always
+		 * some periodic update going on, it is completely frozen
+		 * until we get an update. If MCDE output isn't yet enabled,
+		 * we just send a vblank dummy event back.
+		 */
+		if (crtc->state->active && drm_crtc_vblank_get(crtc) == 0) {
+			dev_dbg(mcde->dev, "arm vblank event\n");
+			drm_crtc_arm_vblank_event(crtc, event);
+		} else {
+			dev_dbg(mcde->dev, "insert fake vblank event\n");
+			drm_crtc_send_vblank_event(crtc, event);
+		}
+
+		spin_unlock_irq(&crtc->dev->event_lock);
+	}
+
+	/*
+	 * We do not start sending framebuffer updates before the
+	 * display is enabled. Update events will however be dispatched
+	 * from the DRM core before the display is enabled.
+	 */
+	if (fb) {
+		mcde_set_extsrc(mcde, drm_fb_cma_get_gem_addr(fb, pstate, 0));
+		dev_info_once(mcde->dev, "first update of display contents\n");
+		/*
+		 * Usually the flow is already active, unless we are in
+		 * oneshot mode, then we need to kick the flow right here.
+		 */
+		if (mcde->flow_active == 0)
+			mcde_start_flow(mcde);
+	} else {
+		/*
+		 * If an update is receieved before the MCDE is enabled
+		 * (before mcde_display_enable() is called) we can't really
+		 * do much with that buffer.
+		 */
+		dev_info(mcde->dev, "ignored a display update\n");
+	}
+}
+
+static int mcde_display_enable_vblank(struct drm_simple_display_pipe *pipe)
+{
+	struct drm_crtc *crtc = &pipe->crtc;
+	struct drm_device *drm = crtc->dev;
+	struct mcde *mcde = to_mcde(drm);
+	u32 val;
+
+	/* Enable all VBLANK IRQs */
+	val = MCDE_PP_VCMPA |
+		MCDE_PP_VCMPB |
+		MCDE_PP_VSCC0 |
+		MCDE_PP_VSCC1 |
+		MCDE_PP_VCMPC0 |
+		MCDE_PP_VCMPC1;
+	writel(val, mcde->regs + MCDE_IMSCPP);
+
+	return 0;
+}
+
+static void mcde_display_disable_vblank(struct drm_simple_display_pipe *pipe)
+{
+	struct drm_crtc *crtc = &pipe->crtc;
+	struct drm_device *drm = crtc->dev;
+	struct mcde *mcde = to_mcde(drm);
+
+	/* Disable all VBLANK IRQs */
+	writel(0, mcde->regs + MCDE_IMSCPP);
+	/* Clear any pending IRQs */
+	writel(0xFFFFFFFF, mcde->regs + MCDE_RISPP);
+}
+
+static struct drm_simple_display_pipe_funcs mcde_display_funcs = {
+	.check = mcde_display_check,
+	.enable = mcde_display_enable,
+	.disable = mcde_display_disable,
+	.update = mcde_display_update,
+	.enable_vblank = mcde_display_enable_vblank,
+	.disable_vblank = mcde_display_disable_vblank,
+	.prepare_fb = drm_gem_fb_simple_display_pipe_prepare_fb,
+};
+
+int mcde_display_init(struct drm_device *drm)
+{
+	struct mcde *mcde = to_mcde(drm);
+	int ret;
+	static const u32 formats[] = {
+		DRM_FORMAT_ARGB8888,
+		DRM_FORMAT_ABGR8888,
+		DRM_FORMAT_XRGB8888,
+		DRM_FORMAT_XBGR8888,
+		DRM_FORMAT_RGB888,
+		DRM_FORMAT_BGR888,
+		DRM_FORMAT_ARGB4444,
+		DRM_FORMAT_ABGR4444,
+		DRM_FORMAT_XRGB4444,
+		DRM_FORMAT_XBGR4444,
+		/* These are actually IRGB1555 so intensity bit is lost */
+		DRM_FORMAT_XRGB1555,
+		DRM_FORMAT_XBGR1555,
+		DRM_FORMAT_RGB565,
+		DRM_FORMAT_BGR565,
+		DRM_FORMAT_YUV422,
+	};
+
+	ret = drm_simple_display_pipe_init(drm, &mcde->pipe,
+					   &mcde_display_funcs,
+					   formats, ARRAY_SIZE(formats),
+					   NULL,
+					   mcde->connector);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(mcde_display_init);
diff --git a/drivers/gpu/drm/mcde/mcde_display_regs.h b/drivers/gpu/drm/mcde/mcde_display_regs.h
new file mode 100644
index 000000000..d3ac7ef5f
--- /dev/null
+++ b/drivers/gpu/drm/mcde/mcde_display_regs.h
@@ -0,0 +1,518 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __DRM_MCDE_DISPLAY_REGS
+#define __DRM_MCDE_DISPLAY_REGS
+
+/* PP (pixel processor) interrupts */
+#define MCDE_IMSCPP 0x00000104
+#define MCDE_RISPP 0x00000114
+#define MCDE_MISPP 0x00000124
+#define MCDE_SISPP 0x00000134
+
+#define MCDE_PP_VCMPA BIT(0)
+#define MCDE_PP_VCMPB BIT(1)
+#define MCDE_PP_VSCC0 BIT(2)
+#define MCDE_PP_VSCC1 BIT(3)
+#define MCDE_PP_VCMPC0 BIT(4)
+#define MCDE_PP_VCMPC1 BIT(5)
+#define MCDE_PP_ROTFD_A BIT(6)
+#define MCDE_PP_ROTFD_B BIT(7)
+
+/* Overlay interrupts */
+#define MCDE_IMSCOVL 0x00000108
+#define MCDE_RISOVL 0x00000118
+#define MCDE_MISOVL 0x00000128
+#define MCDE_SISOVL 0x00000138
+
+/* Channel interrupts */
+#define MCDE_IMSCCHNL 0x0000010C
+#define MCDE_RISCHNL 0x0000011C
+#define MCDE_MISCHNL 0x0000012C
+#define MCDE_SISCHNL 0x0000013C
+
+/* X = 0..9 */
+#define MCDE_EXTSRCXA0 0x00000200
+#define MCDE_EXTSRCXA0_GROUPOFFSET 0x20
+#define MCDE_EXTSRCXA0_BASEADDRESS0_SHIFT 3
+#define MCDE_EXTSRCXA0_BASEADDRESS0_MASK 0xFFFFFFF8
+
+#define MCDE_EXTSRCXA1 0x00000204
+#define MCDE_EXTSRCXA1_GROUPOFFSET 0x20
+#define MCDE_EXTSRCXA1_BASEADDRESS1_SHIFT 3
+#define MCDE_EXTSRCXA1_BASEADDRESS1_MASK 0xFFFFFFF8
+
+/* External sources 0..9 */
+#define MCDE_EXTSRC0CONF 0x0000020C
+#define MCDE_EXTSRC1CONF 0x0000022C
+#define MCDE_EXTSRC2CONF 0x0000024C
+#define MCDE_EXTSRC3CONF 0x0000026C
+#define MCDE_EXTSRC4CONF 0x0000028C
+#define MCDE_EXTSRC5CONF 0x000002AC
+#define MCDE_EXTSRC6CONF 0x000002CC
+#define MCDE_EXTSRC7CONF 0x000002EC
+#define MCDE_EXTSRC8CONF 0x0000030C
+#define MCDE_EXTSRC9CONF 0x0000032C
+#define MCDE_EXTSRCXCONF_GROUPOFFSET 0x20
+#define MCDE_EXTSRCXCONF_BUF_ID_SHIFT 0
+#define MCDE_EXTSRCXCONF_BUF_ID_MASK 0x00000003
+#define MCDE_EXTSRCXCONF_BUF_NB_SHIFT 2
+#define MCDE_EXTSRCXCONF_BUF_NB_MASK 0x0000000C
+#define MCDE_EXTSRCXCONF_PRI_OVLID_SHIFT 4
+#define MCDE_EXTSRCXCONF_PRI_OVLID_MASK 0x000000F0
+#define MCDE_EXTSRCXCONF_BPP_SHIFT 8
+#define MCDE_EXTSRCXCONF_BPP_MASK 0x00000F00
+#define MCDE_EXTSRCXCONF_BPP_1BPP_PAL 0
+#define MCDE_EXTSRCXCONF_BPP_2BPP_PAL 1
+#define MCDE_EXTSRCXCONF_BPP_4BPP_PAL 2
+#define MCDE_EXTSRCXCONF_BPP_8BPP_PAL 3
+#define MCDE_EXTSRCXCONF_BPP_RGB444 4
+#define MCDE_EXTSRCXCONF_BPP_ARGB4444 5
+#define MCDE_EXTSRCXCONF_BPP_IRGB1555 6
+#define MCDE_EXTSRCXCONF_BPP_RGB565 7
+#define MCDE_EXTSRCXCONF_BPP_RGB888 8
+#define MCDE_EXTSRCXCONF_BPP_XRGB8888 9
+#define MCDE_EXTSRCXCONF_BPP_ARGB8888 10
+#define MCDE_EXTSRCXCONF_BPP_YCBCR422 11
+#define MCDE_EXTSRCXCONF_BGR BIT(12)
+#define MCDE_EXTSRCXCONF_BEBO BIT(13)
+#define MCDE_EXTSRCXCONF_BEPO BIT(14)
+#define MCDE_EXTSRCXCONF_TUNNELING_BUFFER_HEIGHT_SHIFT 16
+#define MCDE_EXTSRCXCONF_TUNNELING_BUFFER_HEIGHT_MASK 0x0FFF0000
+
+/* External sources 0..9 */
+#define MCDE_EXTSRC0CR 0x00000210
+#define MCDE_EXTSRC1CR 0x00000230
+#define MCDE_EXTSRC2CR 0x00000250
+#define MCDE_EXTSRC3CR 0x00000270
+#define MCDE_EXTSRC4CR 0x00000290
+#define MCDE_EXTSRC5CR 0x000002B0
+#define MCDE_EXTSRC6CR 0x000002D0
+#define MCDE_EXTSRC7CR 0x000002F0
+#define MCDE_EXTSRC8CR 0x00000310
+#define MCDE_EXTSRC9CR 0x00000330
+#define MCDE_EXTSRCXCR_SEL_MOD_SHIFT 0
+#define MCDE_EXTSRCXCR_SEL_MOD_MASK 0x00000003
+#define MCDE_EXTSRCXCR_SEL_MOD_EXTERNAL_SEL 0
+#define MCDE_EXTSRCXCR_SEL_MOD_AUTO_TOGGLE 1
+#define MCDE_EXTSRCXCR_SEL_MOD_SOFTWARE_SEL 2
+#define MCDE_EXTSRCXCR_MULTIOVL_CTRL_PRIMARY BIT(2) /* 0 = all */
+#define MCDE_EXTSRCXCR_FS_DIV_DISABLE BIT(3)
+#define MCDE_EXTSRCXCR_FORCE_FS_DIV BIT(4)
+
+/* Only external source 6 has a second address register */
+#define MCDE_EXTSRC6A2 0x000002C8
+
+/* 6 overlays */
+#define MCDE_OVL0CR 0x00000400
+#define MCDE_OVL1CR 0x00000420
+#define MCDE_OVL2CR 0x00000440
+#define MCDE_OVL3CR 0x00000460
+#define MCDE_OVL4CR 0x00000480
+#define MCDE_OVL5CR 0x000004A0
+#define MCDE_OVLXCR_OVLEN BIT(0)
+#define MCDE_OVLXCR_COLCCTRL_DISABLED 0
+#define MCDE_OVLXCR_COLCCTRL_ENABLED_NO_SAT (1 << 1)
+#define MCDE_OVLXCR_COLCCTRL_ENABLED_SAT (2 << 1)
+#define MCDE_OVLXCR_CKEYGEN BIT(3)
+#define MCDE_OVLXCR_ALPHAPMEN BIT(4)
+#define MCDE_OVLXCR_OVLF BIT(5)
+#define MCDE_OVLXCR_OVLR BIT(6)
+#define MCDE_OVLXCR_OVLB BIT(7)
+#define MCDE_OVLXCR_FETCH_ROPC_SHIFT 8
+#define MCDE_OVLXCR_FETCH_ROPC_MASK 0x0000FF00
+#define MCDE_OVLXCR_STBPRIO_SHIFT 16
+#define MCDE_OVLXCR_STBPRIO_MASK 0x000F0000
+#define MCDE_OVLXCR_BURSTSIZE_SHIFT 20
+#define MCDE_OVLXCR_BURSTSIZE_MASK 0x00F00000
+#define MCDE_OVLXCR_BURSTSIZE_1W 0
+#define MCDE_OVLXCR_BURSTSIZE_2W 1
+#define MCDE_OVLXCR_BURSTSIZE_4W 2
+#define MCDE_OVLXCR_BURSTSIZE_8W 3
+#define MCDE_OVLXCR_BURSTSIZE_16W 4
+#define MCDE_OVLXCR_BURSTSIZE_HW_1W 8
+#define MCDE_OVLXCR_BURSTSIZE_HW_2W 9
+#define MCDE_OVLXCR_BURSTSIZE_HW_4W 10
+#define MCDE_OVLXCR_BURSTSIZE_HW_8W 11
+#define MCDE_OVLXCR_BURSTSIZE_HW_16W 12
+#define MCDE_OVLXCR_MAXOUTSTANDING_SHIFT 24
+#define MCDE_OVLXCR_MAXOUTSTANDING_MASK 0x0F000000
+#define MCDE_OVLXCR_MAXOUTSTANDING_1_REQ 0
+#define MCDE_OVLXCR_MAXOUTSTANDING_2_REQ 1
+#define MCDE_OVLXCR_MAXOUTSTANDING_4_REQ 2
+#define MCDE_OVLXCR_MAXOUTSTANDING_8_REQ 3
+#define MCDE_OVLXCR_MAXOUTSTANDING_16_REQ 4
+#define MCDE_OVLXCR_ROTBURSTSIZE_SHIFT 28
+#define MCDE_OVLXCR_ROTBURSTSIZE_MASK 0xF0000000
+#define MCDE_OVLXCR_ROTBURSTSIZE_1W 0
+#define MCDE_OVLXCR_ROTBURSTSIZE_2W 1
+#define MCDE_OVLXCR_ROTBURSTSIZE_4W 2
+#define MCDE_OVLXCR_ROTBURSTSIZE_8W 3
+#define MCDE_OVLXCR_ROTBURSTSIZE_16W 4
+#define MCDE_OVLXCR_ROTBURSTSIZE_HW_1W 8
+#define MCDE_OVLXCR_ROTBURSTSIZE_HW_2W 9
+#define MCDE_OVLXCR_ROTBURSTSIZE_HW_4W 10
+#define MCDE_OVLXCR_ROTBURSTSIZE_HW_8W 11
+#define MCDE_OVLXCR_ROTBURSTSIZE_HW_16W 12
+
+#define MCDE_OVL0CONF 0x00000404
+#define MCDE_OVL1CONF 0x00000424
+#define MCDE_OVL2CONF 0x00000444
+#define MCDE_OVL3CONF 0x00000464
+#define MCDE_OVL4CONF 0x00000484
+#define MCDE_OVL5CONF 0x000004A4
+#define MCDE_OVLXCONF_PPL_SHIFT 0
+#define MCDE_OVLXCONF_PPL_MASK 0x000007FF
+#define MCDE_OVLXCONF_EXTSRC_ID_SHIFT 11
+#define MCDE_OVLXCONF_EXTSRC_ID_MASK 0x00007800
+#define MCDE_OVLXCONF_LPF_SHIFT 16
+#define MCDE_OVLXCONF_LPF_MASK 0x07FF0000
+
+#define MCDE_OVL0CONF2 0x00000408
+#define MCDE_OVL1CONF2 0x00000428
+#define MCDE_OVL2CONF2 0x00000448
+#define MCDE_OVL3CONF2 0x00000468
+#define MCDE_OVL4CONF2 0x00000488
+#define MCDE_OVL5CONF2 0x000004A8
+#define MCDE_OVLXCONF2_BP_PER_PIXEL_ALPHA 0
+#define MCDE_OVLXCONF2_BP_CONSTANT_ALPHA BIT(0)
+#define MCDE_OVLXCONF2_ALPHAVALUE_SHIFT 1
+#define MCDE_OVLXCONF2_ALPHAVALUE_MASK 0x000001FE
+#define MCDE_OVLXCONF2_OPQ BIT(9)
+#define MCDE_OVLXCONF2_PIXOFF_SHIFT 10
+#define MCDE_OVLXCONF2_PIXOFF_MASK 0x0000FC00
+#define MCDE_OVLXCONF2_PIXELFETCHERWATERMARKLEVEL_SHIFT 16
+#define MCDE_OVLXCONF2_PIXELFETCHERWATERMARKLEVEL_MASK 0x1FFF0000
+
+#define MCDE_OVL0LJINC 0x0000040C
+#define MCDE_OVL1LJINC 0x0000042C
+#define MCDE_OVL2LJINC 0x0000044C
+#define MCDE_OVL3LJINC 0x0000046C
+#define MCDE_OVL4LJINC 0x0000048C
+#define MCDE_OVL5LJINC 0x000004AC
+
+#define MCDE_OVL0CROP 0x00000410
+#define MCDE_OVL1CROP 0x00000430
+#define MCDE_OVL2CROP 0x00000450
+#define MCDE_OVL3CROP 0x00000470
+#define MCDE_OVL4CROP 0x00000490
+#define MCDE_OVL5CROP 0x000004B0
+#define MCDE_OVLXCROP_TMRGN_SHIFT 0
+#define MCDE_OVLXCROP_TMRGN_MASK 0x003FFFFF
+#define MCDE_OVLXCROP_LMRGN_SHIFT 22
+#define MCDE_OVLXCROP_LMRGN_MASK 0xFFC00000
+
+#define MCDE_OVL0COMP 0x00000414
+#define MCDE_OVL1COMP 0x00000434
+#define MCDE_OVL2COMP 0x00000454
+#define MCDE_OVL3COMP 0x00000474
+#define MCDE_OVL4COMP 0x00000494
+#define MCDE_OVL5COMP 0x000004B4
+#define MCDE_OVLXCOMP_XPOS_SHIFT 0
+#define MCDE_OVLXCOMP_XPOS_MASK 0x000007FF
+#define MCDE_OVLXCOMP_CH_ID_SHIFT 11
+#define MCDE_OVLXCOMP_CH_ID_MASK 0x00007800
+#define MCDE_OVLXCOMP_YPOS_SHIFT 16
+#define MCDE_OVLXCOMP_YPOS_MASK 0x07FF0000
+#define MCDE_OVLXCOMP_Z_SHIFT 27
+#define MCDE_OVLXCOMP_Z_MASK 0x78000000
+
+#define MCDE_CRC 0x00000C00
+#define MCDE_CRC_C1EN BIT(2)
+#define MCDE_CRC_C2EN BIT(3)
+#define MCDE_CRC_SYCEN0 BIT(7)
+#define MCDE_CRC_SYCEN1 BIT(8)
+#define MCDE_CRC_SIZE1 BIT(9)
+#define MCDE_CRC_SIZE2 BIT(10)
+#define MCDE_CRC_YUVCONVC1EN BIT(15)
+#define MCDE_CRC_CS1EN BIT(16)
+#define MCDE_CRC_CS2EN BIT(17)
+#define MCDE_CRC_CS1POL BIT(19)
+#define MCDE_CRC_CS2POL BIT(20)
+#define MCDE_CRC_CD1POL BIT(21)
+#define MCDE_CRC_CD2POL BIT(22)
+#define MCDE_CRC_WR1POL BIT(23)
+#define MCDE_CRC_WR2POL BIT(24)
+#define MCDE_CRC_RD1POL BIT(25)
+#define MCDE_CRC_RD2POL BIT(26)
+#define MCDE_CRC_SYNCCTRL_SHIFT 29
+#define MCDE_CRC_SYNCCTRL_MASK 0x60000000
+#define MCDE_CRC_SYNCCTRL_NO_SYNC 0
+#define MCDE_CRC_SYNCCTRL_DBI0 1
+#define MCDE_CRC_SYNCCTRL_DBI1 2
+#define MCDE_CRC_SYNCCTRL_PING_PONG 3
+#define MCDE_CRC_CLAMPC1EN BIT(31)
+
+#define MCDE_VSCRC0 0x00000C5C
+#define MCDE_VSCRC1 0x00000C60
+#define MCDE_VSCRC_VSPMIN_MASK 0x00000FFF
+#define MCDE_VSCRC_VSPMAX_SHIFT 12
+#define MCDE_VSCRC_VSPMAX_MASK 0x00FFF000
+#define MCDE_VSCRC_VSPDIV_SHIFT 24
+#define MCDE_VSCRC_VSPDIV_MASK 0x07000000
+#define MCDE_VSCRC_VSPDIV_MCDECLK_DIV_1 0
+#define MCDE_VSCRC_VSPDIV_MCDECLK_DIV_2 1
+#define MCDE_VSCRC_VSPDIV_MCDECLK_DIV_4 2
+#define MCDE_VSCRC_VSPDIV_MCDECLK_DIV_8 3
+#define MCDE_VSCRC_VSPDIV_MCDECLK_DIV_16 4
+#define MCDE_VSCRC_VSPDIV_MCDECLK_DIV_32 5
+#define MCDE_VSCRC_VSPDIV_MCDECLK_DIV_64 6
+#define MCDE_VSCRC_VSPDIV_MCDECLK_DIV_128 7
+#define MCDE_VSCRC_VSPOL BIT(27) /* 0 active high, 1 active low */
+#define MCDE_VSCRC_VSSEL BIT(28) /* 0 VSYNC0, 1 VSYNC1 */
+#define MCDE_VSCRC_VSDBL BIT(29)
+
+/* Channel config 0..3 */
+#define MCDE_CHNL0CONF 0x00000600
+#define MCDE_CHNL1CONF 0x00000620
+#define MCDE_CHNL2CONF 0x00000640
+#define MCDE_CHNL3CONF 0x00000660
+#define MCDE_CHNLXCONF_PPL_SHIFT 0
+#define MCDE_CHNLXCONF_PPL_MASK 0x000007FF
+#define MCDE_CHNLXCONF_LPF_SHIFT 16
+#define MCDE_CHNLXCONF_LPF_MASK 0x07FF0000
+#define MCDE_MAX_WIDTH 2048
+
+/* Channel status 0..3 */
+#define MCDE_CHNL0STAT 0x00000604
+#define MCDE_CHNL1STAT 0x00000624
+#define MCDE_CHNL2STAT 0x00000644
+#define MCDE_CHNL3STAT 0x00000664
+#define MCDE_CHNLXSTAT_CHNLRD BIT(0)
+#define MCDE_CHNLXSTAT_CHNLA BIT(1)
+#define MCDE_CHNLXSTAT_CHNLBLBCKGND_EN BIT(16)
+#define MCDE_CHNLXSTAT_PPLX2_V422 BIT(17)
+#define MCDE_CHNLXSTAT_LPFX2_V422 BIT(18)
+
+/* Sync settings for channel 0..3 */
+#define MCDE_CHNL0SYNCHMOD 0x00000608
+#define MCDE_CHNL1SYNCHMOD 0x00000628
+#define MCDE_CHNL2SYNCHMOD 0x00000648
+#define MCDE_CHNL3SYNCHMOD 0x00000668
+
+#define MCDE_CHNLXSYNCHMOD_SRC_SYNCH_SHIFT 0
+#define MCDE_CHNLXSYNCHMOD_SRC_SYNCH_MASK 0x00000003
+#define MCDE_CHNLXSYNCHMOD_SRC_SYNCH_HARDWARE 0
+#define MCDE_CHNLXSYNCHMOD_SRC_SYNCH_NO_SYNCH 1
+#define MCDE_CHNLXSYNCHMOD_SRC_SYNCH_SOFTWARE 2
+#define MCDE_CHNLXSYNCHMOD_OUT_SYNCH_SRC_SHIFT 2
+#define MCDE_CHNLXSYNCHMOD_OUT_SYNCH_SRC_MASK 0x0000001C
+#define MCDE_CHNLXSYNCHMOD_OUT_SYNCH_SRC_FORMATTER 0
+#define MCDE_CHNLXSYNCHMOD_OUT_SYNCH_SRC_TE0 1
+#define MCDE_CHNLXSYNCHMOD_OUT_SYNCH_SRC_TE1 2
+
+/* Software sync triggers for channel 0..3 */
+#define MCDE_CHNL0SYNCHSW 0x0000060C
+#define MCDE_CHNL1SYNCHSW 0x0000062C
+#define MCDE_CHNL2SYNCHSW 0x0000064C
+#define MCDE_CHNL3SYNCHSW 0x0000066C
+#define MCDE_CHNLXSYNCHSW_SW_TRIG BIT(0)
+
+#define MCDE_CHNL0BCKGNDCOL 0x00000610
+#define MCDE_CHNL1BCKGNDCOL 0x00000630
+#define MCDE_CHNL2BCKGNDCOL 0x00000650
+#define MCDE_CHNL3BCKGNDCOL 0x00000670
+#define MCDE_CHNLXBCKGNDCOL_B_SHIFT 0
+#define MCDE_CHNLXBCKGNDCOL_B_MASK 0x000000FF
+#define MCDE_CHNLXBCKGNDCOL_G_SHIFT 8
+#define MCDE_CHNLXBCKGNDCOL_G_MASK 0x0000FF00
+#define MCDE_CHNLXBCKGNDCOL_R_SHIFT 16
+#define MCDE_CHNLXBCKGNDCOL_R_MASK 0x00FF0000
+
+#define MCDE_CHNL0MUXING 0x00000614
+#define MCDE_CHNL1MUXING 0x00000634
+#define MCDE_CHNL2MUXING 0x00000654
+#define MCDE_CHNL3MUXING 0x00000674
+#define MCDE_CHNLXMUXING_FIFO_ID_FIFO_A 0
+#define MCDE_CHNLXMUXING_FIFO_ID_FIFO_B 1
+#define MCDE_CHNLXMUXING_FIFO_ID_FIFO_C0 2
+#define MCDE_CHNLXMUXING_FIFO_ID_FIFO_C1 3
+
+/* Pixel processing control registers for channel A B,  */
+#define MCDE_CRA0 0x00000800
+#define MCDE_CRB0 0x00000A00
+#define MCDE_CRX0_FLOEN BIT(0)
+#define MCDE_CRX0_POWEREN BIT(1)
+#define MCDE_CRX0_BLENDEN BIT(2)
+#define MCDE_CRX0_AFLICKEN BIT(3)
+#define MCDE_CRX0_PALEN BIT(4)
+#define MCDE_CRX0_DITHEN BIT(5)
+#define MCDE_CRX0_GAMEN BIT(6)
+#define MCDE_CRX0_KEYCTRL_SHIFT 7
+#define MCDE_CRX0_KEYCTRL_MASK 0x00000380
+#define MCDE_CRX0_KEYCTRL_OFF 0
+#define MCDE_CRX0_KEYCTRL_ALPHA_RGB 1
+#define MCDE_CRX0_KEYCTRL_RGB 2
+#define MCDE_CRX0_KEYCTRL_FALPHA_FRGB 4
+#define MCDE_CRX0_KEYCTRL_FRGB 5
+#define MCDE_CRX0_BLENDCTRL BIT(10)
+#define MCDE_CRX0_FLICKMODE_SHIFT 11
+#define MCDE_CRX0_FLICKMODE_MASK 0x00001800
+#define MCDE_CRX0_FLICKMODE_FORCE_FILTER_0 0
+#define MCDE_CRX0_FLICKMODE_ADAPTIVE 1
+#define MCDE_CRX0_FLICKMODE_TEST_MODE 2
+#define MCDE_CRX0_FLOCKFORMAT_RGB BIT(13) /* 0 = YCVCR */
+#define MCDE_CRX0_PALMODE_GAMMA BIT(14) /* 0 = palette */
+#define MCDE_CRX0_OLEDEN BIT(15)
+#define MCDE_CRX0_ALPHABLEND_SHIFT 16
+#define MCDE_CRX0_ALPHABLEND_MASK 0x00FF0000
+#define MCDE_CRX0_ROTEN BIT(24)
+
+#define MCDE_CRA1 0x00000804
+#define MCDE_CRB1 0x00000A04
+#define MCDE_CRX1_PCD_SHIFT 0
+#define MCDE_CRX1_PCD_MASK 0x000003FF
+#define MCDE_CRX1_CLKSEL_SHIFT 10
+#define MCDE_CRX1_CLKSEL_MASK 0x00001C00
+#define MCDE_CRX1_CLKSEL_CLKPLL72 0
+#define MCDE_CRX1_CLKSEL_CLKPLL27 2
+#define MCDE_CRX1_CLKSEL_TV1CLK 3
+#define MCDE_CRX1_CLKSEL_TV2CLK 4
+#define MCDE_CRX1_CLKSEL_MCDECLK 5
+#define MCDE_CRX1_CDWIN_SHIFT 13
+#define MCDE_CRX1_CDWIN_MASK 0x0001E000
+#define MCDE_CRX1_CDWIN_8BPP_C1 0
+#define MCDE_CRX1_CDWIN_12BPP_C1 1
+#define MCDE_CRX1_CDWIN_12BPP_C2 2
+#define MCDE_CRX1_CDWIN_16BPP_C1 3
+#define MCDE_CRX1_CDWIN_16BPP_C2 4
+#define MCDE_CRX1_CDWIN_16BPP_C3 5
+#define MCDE_CRX1_CDWIN_18BPP_C1 6
+#define MCDE_CRX1_CDWIN_18BPP_C2 7
+#define MCDE_CRX1_CDWIN_24BPP 8
+#define MCDE_CRX1_OUTBPP_SHIFT 25
+#define MCDE_CRX1_OUTBPP_MASK 0x1E000000
+#define MCDE_CRX1_OUTBPP_MONO1 0
+#define MCDE_CRX1_OUTBPP_MONO2 1
+#define MCDE_CRX1_OUTBPP_MONO4 2
+#define MCDE_CRX1_OUTBPP_MONO8 3
+#define MCDE_CRX1_OUTBPP_8BPP 4
+#define MCDE_CRX1_OUTBPP_12BPP 5
+#define MCDE_CRX1_OUTBPP_15BPP 6
+#define MCDE_CRX1_OUTBPP_16BPP 7
+#define MCDE_CRX1_OUTBPP_18BPP 8
+#define MCDE_CRX1_OUTBPP_24BPP 9
+#define MCDE_CRX1_BCD BIT(29)
+#define MCDE_CRA1_CLKTYPE_TVXCLKSEL1 BIT(30) /* 0 = TVXCLKSEL1 */
+
+#define MCDE_COLKEYA 0x00000808
+#define MCDE_COLKEYB 0x00000A08
+
+#define MCDE_FCOLKEYA 0x0000080C
+#define MCDE_FCOLKEYB 0x00000A0C
+
+#define MCDE_RGBCONV1A 0x00000810
+#define MCDE_RGBCONV1B 0x00000A10
+
+#define MCDE_RGBCONV2A 0x00000814
+#define MCDE_RGBCONV2B 0x00000A14
+
+#define MCDE_RGBCONV3A 0x00000818
+#define MCDE_RGBCONV3B 0x00000A18
+
+#define MCDE_RGBCONV4A 0x0000081C
+#define MCDE_RGBCONV4B 0x00000A1C
+
+#define MCDE_RGBCONV5A 0x00000820
+#define MCDE_RGBCONV5B 0x00000A20
+
+#define MCDE_RGBCONV6A 0x00000824
+#define MCDE_RGBCONV6B 0x00000A24
+
+/* Rotation */
+#define MCDE_ROTACONF 0x0000087C
+#define MCDE_ROTBCONF 0x00000A7C
+
+#define MCDE_SYNCHCONFA 0x00000880
+#define MCDE_SYNCHCONFB 0x00000A80
+
+/* Channel A+B control registers */
+#define MCDE_CTRLA 0x00000884
+#define MCDE_CTRLB 0x00000A84
+#define MCDE_CTRLX_FIFOWTRMRK_SHIFT 0
+#define MCDE_CTRLX_FIFOWTRMRK_MASK 0x000003FF
+#define MCDE_CTRLX_FIFOEMPTY BIT(12)
+#define MCDE_CTRLX_FIFOFULL BIT(13)
+#define MCDE_CTRLX_FORMID_SHIFT 16
+#define MCDE_CTRLX_FORMID_MASK 0x00070000
+#define MCDE_CTRLX_FORMID_DSI0VID 0
+#define MCDE_CTRLX_FORMID_DSI0CMD 1
+#define MCDE_CTRLX_FORMID_DSI1VID 2
+#define MCDE_CTRLX_FORMID_DSI1CMD 3
+#define MCDE_CTRLX_FORMID_DSI2VID 4
+#define MCDE_CTRLX_FORMID_DSI2CMD 5
+#define MCDE_CTRLX_FORMID_DPIA 0
+#define MCDE_CTRLX_FORMID_DPIB 1
+#define MCDE_CTRLX_FORMTYPE_SHIFT 20
+#define MCDE_CTRLX_FORMTYPE_MASK 0x00700000
+#define MCDE_CTRLX_FORMTYPE_DPITV 0
+#define MCDE_CTRLX_FORMTYPE_DBI 1
+#define MCDE_CTRLX_FORMTYPE_DSI 2
+
+#define MCDE_DSIVID0CONF0 0x00000E00
+#define MCDE_DSICMD0CONF0 0x00000E20
+#define MCDE_DSIVID1CONF0 0x00000E40
+#define MCDE_DSICMD1CONF0 0x00000E60
+#define MCDE_DSIVID2CONF0 0x00000E80
+#define MCDE_DSICMD2CONF0 0x00000EA0
+#define MCDE_DSICONF0_BLANKING_SHIFT 0
+#define MCDE_DSICONF0_BLANKING_MASK 0x000000FF
+#define MCDE_DSICONF0_VID_MODE_CMD 0
+#define MCDE_DSICONF0_VID_MODE_VID BIT(12)
+#define MCDE_DSICONF0_CMD8 BIT(13)
+#define MCDE_DSICONF0_BIT_SWAP BIT(16)
+#define MCDE_DSICONF0_BYTE_SWAP BIT(17)
+#define MCDE_DSICONF0_DCSVID_NOTGEN BIT(18)
+#define MCDE_DSICONF0_PACKING_SHIFT 20
+#define MCDE_DSICONF0_PACKING_MASK 0x00700000
+#define MCDE_DSICONF0_PACKING_RGB565 0
+#define MCDE_DSICONF0_PACKING_RGB666 1
+#define MCDE_DSICONF0_PACKING_RGB666_PACKED 2
+#define MCDE_DSICONF0_PACKING_RGB888 3
+#define MCDE_DSICONF0_PACKING_HDTV 4
+
+#define MCDE_DSIVID0FRAME 0x00000E04
+#define MCDE_DSICMD0FRAME 0x00000E24
+#define MCDE_DSIVID1FRAME 0x00000E44
+#define MCDE_DSICMD1FRAME 0x00000E64
+#define MCDE_DSIVID2FRAME 0x00000E84
+#define MCDE_DSICMD2FRAME 0x00000EA4
+
+#define MCDE_DSIVID0PKT 0x00000E08
+#define MCDE_DSICMD0PKT 0x00000E28
+#define MCDE_DSIVID1PKT 0x00000E48
+#define MCDE_DSICMD1PKT 0x00000E68
+#define MCDE_DSIVID2PKT 0x00000E88
+#define MCDE_DSICMD2PKT 0x00000EA8
+
+#define MCDE_DSIVID0SYNC 0x00000E0C
+#define MCDE_DSICMD0SYNC 0x00000E2C
+#define MCDE_DSIVID1SYNC 0x00000E4C
+#define MCDE_DSICMD1SYNC 0x00000E6C
+#define MCDE_DSIVID2SYNC 0x00000E8C
+#define MCDE_DSICMD2SYNC 0x00000EAC
+
+#define MCDE_DSIVID0CMDW 0x00000E10
+#define MCDE_DSICMD0CMDW 0x00000E30
+#define MCDE_DSIVID1CMDW 0x00000E50
+#define MCDE_DSICMD1CMDW 0x00000E70
+#define MCDE_DSIVID2CMDW 0x00000E90
+#define MCDE_DSICMD2CMDW 0x00000EB0
+#define MCDE_DSIVIDXCMDW_CMDW_CONTINUE_SHIFT 0
+#define MCDE_DSIVIDXCMDW_CMDW_CONTINUE_MASK 0x0000FFFF
+#define MCDE_DSIVIDXCMDW_CMDW_START_SHIFT 16
+#define MCDE_DSIVIDXCMDW_CMDW_START_MASK 0xFFFF0000
+
+#define MCDE_DSIVID0DELAY0 0x00000E14
+#define MCDE_DSICMD0DELAY0 0x00000E34
+#define MCDE_DSIVID1DELAY0 0x00000E54
+#define MCDE_DSICMD1DELAY0 0x00000E74
+#define MCDE_DSIVID2DELAY0 0x00000E94
+#define MCDE_DSICMD2DELAY0 0x00000EB4
+
+#define MCDE_DSIVID0DELAY1 0x00000E18
+#define MCDE_DSICMD0DELAY1 0x00000E38
+#define MCDE_DSIVID1DELAY1 0x00000E58
+#define MCDE_DSICMD1DELAY1 0x00000E78
+#define MCDE_DSIVID2DELAY1 0x00000E98
+#define MCDE_DSICMD2DELAY1 0x00000EB8
+
+#endif /* __DRM_MCDE_DISPLAY_REGS */
diff --git a/drivers/gpu/drm/mcde/mcde_drm.h b/drivers/gpu/drm/mcde/mcde_drm.h
new file mode 100644
index 000000000..8253e2f99
--- /dev/null
+++ b/drivers/gpu/drm/mcde/mcde_drm.h
@@ -0,0 +1,108 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2018 Linus Walleij <linus.walleij@linaro.org>
+ * Parts of this file were based on the MCDE driver by Marcus Lorentzon
+ * (C) ST-Ericsson SA 2013
+ */
+#include <drm/drm_simple_kms_helper.h>
+
+#ifndef _MCDE_DRM_H_
+#define _MCDE_DRM_H_
+
+/* Shared basic registers */
+#define MCDE_CR 0x00000000
+#define MCDE_CR_IFIFOEMPTYLINECOUNT_V422_SHIFT 0
+#define MCDE_CR_IFIFOEMPTYLINECOUNT_V422_MASK 0x0000003F
+#define MCDE_CR_IFIFOCTRLEN BIT(15)
+#define MCDE_CR_UFRECOVERY_MODE_V422 BIT(16)
+#define MCDE_CR_WRAP_MODE_V422_SHIFT BIT(17)
+#define MCDE_CR_AUTOCLKG_EN BIT(30)
+#define MCDE_CR_MCDEEN BIT(31)
+
+#define MCDE_CONF0 0x00000004
+#define MCDE_CONF0_SYNCMUX0 BIT(0)
+#define MCDE_CONF0_SYNCMUX1 BIT(1)
+#define MCDE_CONF0_SYNCMUX2 BIT(2)
+#define MCDE_CONF0_SYNCMUX3 BIT(3)
+#define MCDE_CONF0_SYNCMUX4 BIT(4)
+#define MCDE_CONF0_SYNCMUX5 BIT(5)
+#define MCDE_CONF0_SYNCMUX6 BIT(6)
+#define MCDE_CONF0_SYNCMUX7 BIT(7)
+#define MCDE_CONF0_IFIFOCTRLWTRMRKLVL_SHIFT 12
+#define MCDE_CONF0_IFIFOCTRLWTRMRKLVL_MASK 0x00007000
+#define MCDE_CONF0_OUTMUX0_SHIFT 16
+#define MCDE_CONF0_OUTMUX0_MASK 0x00070000
+#define MCDE_CONF0_OUTMUX1_SHIFT 19
+#define MCDE_CONF0_OUTMUX1_MASK 0x00380000
+#define MCDE_CONF0_OUTMUX2_SHIFT 22
+#define MCDE_CONF0_OUTMUX2_MASK 0x01C00000
+#define MCDE_CONF0_OUTMUX3_SHIFT 25
+#define MCDE_CONF0_OUTMUX3_MASK 0x0E000000
+#define MCDE_CONF0_OUTMUX4_SHIFT 28
+#define MCDE_CONF0_OUTMUX4_MASK 0x70000000
+
+#define MCDE_SSP 0x00000008
+#define MCDE_AIS 0x00000100
+#define MCDE_IMSCERR 0x00000110
+#define MCDE_RISERR 0x00000120
+#define MCDE_MISERR 0x00000130
+#define MCDE_SISERR 0x00000140
+
+enum mcde_flow_mode {
+	/* One-shot mode: flow stops after one frame */
+	MCDE_COMMAND_ONESHOT_FLOW,
+	/* Command mode with tearing effect (TE) IRQ sync */
+	MCDE_COMMAND_TE_FLOW,
+	/*
+	 * Command mode with bus turn-around (BTA) and tearing effect
+	 * (TE) IRQ sync.
+	 */
+	MCDE_COMMAND_BTA_TE_FLOW,
+	/* Video mode with tearing effect (TE) sync IRQ */
+	MCDE_VIDEO_TE_FLOW,
+	/* Video mode with the formatter itself as sync source */
+	MCDE_VIDEO_FORMATTER_FLOW,
+};
+
+struct mcde {
+	struct drm_device drm;
+	struct device *dev;
+	struct drm_panel *panel;
+	struct drm_bridge *bridge;
+	struct drm_connector *connector;
+	struct drm_simple_display_pipe pipe;
+	struct mipi_dsi_device *mdsi;
+	s16 stride;
+	enum mcde_flow_mode flow_mode;
+	unsigned int flow_active;
+	spinlock_t flow_lock; /* Locks the channel flow control */
+
+	void __iomem *regs;
+
+	struct clk *mcde_clk;
+	struct clk *lcd_clk;
+	struct clk *hdmi_clk;
+
+	struct regulator *epod;
+	struct regulator *vana;
+};
+
+#define to_mcde(dev) container_of(dev, struct mcde, drm)
+
+static inline bool mcde_flow_is_video(struct mcde *mcde)
+{
+	return (mcde->flow_mode == MCDE_VIDEO_TE_FLOW ||
+		mcde->flow_mode == MCDE_VIDEO_FORMATTER_FLOW);
+}
+
+bool mcde_dsi_irq(struct mipi_dsi_device *mdsi);
+void mcde_dsi_te_request(struct mipi_dsi_device *mdsi);
+void mcde_dsi_enable(struct drm_bridge *bridge);
+void mcde_dsi_disable(struct drm_bridge *bridge);
+extern struct platform_driver mcde_dsi_driver;
+
+void mcde_display_irq(struct mcde *mcde);
+void mcde_display_disable_irqs(struct mcde *mcde);
+int mcde_display_init(struct drm_device *drm);
+
+#endif /* _MCDE_DRM_H_ */
diff --git a/drivers/gpu/drm/mcde/mcde_drv.c b/drivers/gpu/drm/mcde/mcde_drv.c
new file mode 100644
index 000000000..210f5e163
--- /dev/null
+++ b/drivers/gpu/drm/mcde/mcde_drv.c
@@ -0,0 +1,495 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Linus Walleij <linus.walleij@linaro.org>
+ * Parts of this file were based on the MCDE driver by Marcus Lorentzon
+ * (C) ST-Ericsson SA 2013
+ */
+
+/**
+ * DOC: ST-Ericsson MCDE Driver
+ *
+ * The MCDE (short for multi-channel display engine) is a graphics
+ * controller found in the Ux500 chipsets, such as NovaThor U8500.
+ * It was initially conceptualized by ST Microelectronics for the
+ * successor of the Nomadik line, STn8500 but productified in the
+ * ST-Ericsson U8500 where is was used for mass-market deployments
+ * in Android phones from Samsung and Sony Ericsson.
+ *
+ * It can do 1080p30 on SDTV CCIR656, DPI-2, DBI-2 or DSI for
+ * panels with or without frame buffering and can convert most
+ * input formats including most variants of RGB and YUV.
+ *
+ * The hardware has four display pipes, and the layout is a little
+ * bit like this::
+ *
+ *   Memory     -> Overlay -> Channel -> FIFO -> 5 formatters -> DSI/DPI
+ *   External      0..5       0..3       A,B,    3 x DSI         bridge
+ *   source 0..9                         C0,C1   2 x DPI
+ *
+ * FIFOs A and B are for LCD and HDMI while FIFO CO/C1 are for
+ * panels with embedded buffer.
+ * 3 of the formatters are for DSI.
+ * 2 of the formatters are for DPI.
+ *
+ * Behind the formatters are the DSI or DPI ports that route to
+ * the external pins of the chip. As there are 3 DSI ports and one
+ * DPI port, it is possible to configure up to 4 display pipelines
+ * (effectively using channels 0..3) for concurrent use.
+ *
+ * In the current DRM/KMS setup, we use one external source, one overlay,
+ * one FIFO and one formatter which we connect to the simple CMA framebuffer
+ * helpers. We then provide a bridge to the DSI port, and on the DSI port
+ * bridge we connect hang a panel bridge or other bridge. This may be subject
+ * to change as we exploit more of the hardware capabilities.
+ *
+ * TODO:
+ *
+ * - Enabled damaged rectangles using drm_plane_enable_fb_damage_clips()
+ *   so we can selectively just transmit the damaged area to a
+ *   command-only display.
+ * - Enable mixing of more planes, possibly at the cost of moving away
+ *   from using the simple framebuffer pipeline.
+ * - Enable output to bridges such as the AV8100 HDMI encoder from
+ *   the DSI bridge.
+ */
+
+#include <linux/clk.h>
+#include <linux/component.h>
+#include <linux/dma-buf.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_bridge.h>
+#include <drm/drm_drv.h>
+#include <drm/drm_fb_cma_helper.h>
+#include <drm/drm_fb_helper.h>
+#include <drm/drm_gem.h>
+#include <drm/drm_gem_cma_helper.h>
+#include <drm/drm_gem_framebuffer_helper.h>
+#include <drm/drm_managed.h>
+#include <drm/drm_of.h>
+#include <drm/drm_probe_helper.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_vblank.h>
+
+#include "mcde_drm.h"
+
+#define DRIVER_DESC	"DRM module for MCDE"
+
+#define MCDE_PID 0x000001FC
+#define MCDE_PID_METALFIX_VERSION_SHIFT 0
+#define MCDE_PID_METALFIX_VERSION_MASK 0x000000FF
+#define MCDE_PID_DEVELOPMENT_VERSION_SHIFT 8
+#define MCDE_PID_DEVELOPMENT_VERSION_MASK 0x0000FF00
+#define MCDE_PID_MINOR_VERSION_SHIFT 16
+#define MCDE_PID_MINOR_VERSION_MASK 0x00FF0000
+#define MCDE_PID_MAJOR_VERSION_SHIFT 24
+#define MCDE_PID_MAJOR_VERSION_MASK 0xFF000000
+
+static const struct drm_mode_config_funcs mcde_mode_config_funcs = {
+	.fb_create = drm_gem_fb_create_with_dirty,
+	.atomic_check = drm_atomic_helper_check,
+	.atomic_commit = drm_atomic_helper_commit,
+};
+
+static const struct drm_mode_config_helper_funcs mcde_mode_config_helpers = {
+	/*
+	 * Using this function is necessary to commit atomic updates
+	 * that need the CRTC to be enabled before a commit, as is
+	 * the case with e.g. DSI displays.
+	 */
+	.atomic_commit_tail = drm_atomic_helper_commit_tail_rpm,
+};
+
+static irqreturn_t mcde_irq(int irq, void *data)
+{
+	struct mcde *mcde = data;
+	u32 val;
+
+	val = readl(mcde->regs + MCDE_MISERR);
+
+	mcde_display_irq(mcde);
+
+	if (val)
+		dev_info(mcde->dev, "some error IRQ\n");
+	writel(val, mcde->regs + MCDE_RISERR);
+
+	return IRQ_HANDLED;
+}
+
+static int mcde_modeset_init(struct drm_device *drm)
+{
+	struct drm_mode_config *mode_config;
+	struct mcde *mcde = to_mcde(drm);
+	int ret;
+
+	if (!mcde->bridge) {
+		dev_err(drm->dev, "no display output bridge yet\n");
+		return -EPROBE_DEFER;
+	}
+
+	mode_config = &drm->mode_config;
+	mode_config->funcs = &mcde_mode_config_funcs;
+	mode_config->helper_private = &mcde_mode_config_helpers;
+	/* This hardware can do 1080p */
+	mode_config->min_width = 1;
+	mode_config->max_width = 1920;
+	mode_config->min_height = 1;
+	mode_config->max_height = 1080;
+
+	ret = drm_vblank_init(drm, 1);
+	if (ret) {
+		dev_err(drm->dev, "failed to init vblank\n");
+		return ret;
+	}
+
+	ret = mcde_display_init(drm);
+	if (ret) {
+		dev_err(drm->dev, "failed to init display\n");
+		return ret;
+	}
+
+	/*
+	 * Attach the DSI bridge
+	 *
+	 * TODO: when adding support for the DPI bridge or several DSI bridges,
+	 * we selectively connect the bridge(s) here instead of this simple
+	 * attachment.
+	 */
+	ret = drm_simple_display_pipe_attach_bridge(&mcde->pipe,
+						    mcde->bridge);
+	if (ret) {
+		dev_err(drm->dev, "failed to attach display output bridge\n");
+		return ret;
+	}
+
+	drm_mode_config_reset(drm);
+	drm_kms_helper_poll_init(drm);
+
+	return 0;
+}
+
+DEFINE_DRM_GEM_CMA_FOPS(drm_fops);
+
+static struct drm_driver mcde_drm_driver = {
+	.driver_features =
+		DRIVER_MODESET | DRIVER_GEM | DRIVER_ATOMIC,
+	.lastclose = drm_fb_helper_lastclose,
+	.ioctls = NULL,
+	.fops = &drm_fops,
+	.name = "mcde",
+	.desc = DRIVER_DESC,
+	.date = "20180529",
+	.major = 1,
+	.minor = 0,
+	.patchlevel = 0,
+	DRM_GEM_CMA_DRIVER_OPS,
+};
+
+static int mcde_drm_bind(struct device *dev)
+{
+	struct drm_device *drm = dev_get_drvdata(dev);
+	int ret;
+
+	ret = drmm_mode_config_init(drm);
+	if (ret)
+		return ret;
+
+	ret = component_bind_all(drm->dev, drm);
+	if (ret) {
+		dev_err(dev, "can't bind component devices\n");
+		return ret;
+	}
+
+	ret = mcde_modeset_init(drm);
+	if (ret)
+		goto unbind;
+
+	ret = drm_dev_register(drm, 0);
+	if (ret < 0)
+		goto unbind;
+
+	drm_fbdev_generic_setup(drm, 32);
+
+	return 0;
+
+unbind:
+	component_unbind_all(drm->dev, drm);
+	return ret;
+}
+
+static void mcde_drm_unbind(struct device *dev)
+{
+	struct drm_device *drm = dev_get_drvdata(dev);
+
+	drm_dev_unregister(drm);
+	drm_atomic_helper_shutdown(drm);
+	component_unbind_all(drm->dev, drm);
+}
+
+static const struct component_master_ops mcde_drm_comp_ops = {
+	.bind = mcde_drm_bind,
+	.unbind = mcde_drm_unbind,
+};
+
+static struct platform_driver *const mcde_component_drivers[] = {
+	&mcde_dsi_driver,
+};
+
+static int mcde_compare_dev(struct device *dev, void *data)
+{
+	return dev == data;
+}
+
+static int mcde_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct drm_device *drm;
+	struct mcde *mcde;
+	struct component_match *match = NULL;
+	struct resource *res;
+	u32 pid;
+	int irq;
+	int ret;
+	int i;
+
+	mcde = devm_drm_dev_alloc(dev, &mcde_drm_driver, struct mcde, drm);
+	if (IS_ERR(mcde))
+		return PTR_ERR(mcde);
+	drm = &mcde->drm;
+	mcde->dev = dev;
+	platform_set_drvdata(pdev, drm);
+
+	/* First obtain and turn on the main power */
+	mcde->epod = devm_regulator_get(dev, "epod");
+	if (IS_ERR(mcde->epod)) {
+		ret = PTR_ERR(mcde->epod);
+		dev_err(dev, "can't get EPOD regulator\n");
+		return ret;
+	}
+	ret = regulator_enable(mcde->epod);
+	if (ret) {
+		dev_err(dev, "can't enable EPOD regulator\n");
+		return ret;
+	}
+	mcde->vana = devm_regulator_get(dev, "vana");
+	if (IS_ERR(mcde->vana)) {
+		ret = PTR_ERR(mcde->vana);
+		dev_err(dev, "can't get VANA regulator\n");
+		goto regulator_epod_off;
+	}
+	ret = regulator_enable(mcde->vana);
+	if (ret) {
+		dev_err(dev, "can't enable VANA regulator\n");
+		goto regulator_epod_off;
+	}
+	/*
+	 * The vendor code uses ESRAM (onchip RAM) and need to activate
+	 * the v-esram34 regulator, but we don't use that yet
+	 */
+
+	/* Clock the silicon so we can access the registers */
+	mcde->mcde_clk = devm_clk_get(dev, "mcde");
+	if (IS_ERR(mcde->mcde_clk)) {
+		dev_err(dev, "unable to get MCDE main clock\n");
+		ret = PTR_ERR(mcde->mcde_clk);
+		goto regulator_off;
+	}
+	ret = clk_prepare_enable(mcde->mcde_clk);
+	if (ret) {
+		dev_err(dev, "failed to enable MCDE main clock\n");
+		goto regulator_off;
+	}
+	dev_info(dev, "MCDE clk rate %lu Hz\n", clk_get_rate(mcde->mcde_clk));
+
+	mcde->lcd_clk = devm_clk_get(dev, "lcd");
+	if (IS_ERR(mcde->lcd_clk)) {
+		dev_err(dev, "unable to get LCD clock\n");
+		ret = PTR_ERR(mcde->lcd_clk);
+		goto clk_disable;
+	}
+	mcde->hdmi_clk = devm_clk_get(dev, "hdmi");
+	if (IS_ERR(mcde->hdmi_clk)) {
+		dev_err(dev, "unable to get HDMI clock\n");
+		ret = PTR_ERR(mcde->hdmi_clk);
+		goto clk_disable;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	mcde->regs = devm_ioremap_resource(dev, res);
+	if (IS_ERR(mcde->regs)) {
+		dev_err(dev, "no MCDE regs\n");
+		ret = -EINVAL;
+		goto clk_disable;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		ret = irq;
+		goto clk_disable;
+	}
+
+	ret = devm_request_irq(dev, irq, mcde_irq, 0, "mcde", mcde);
+	if (ret) {
+		dev_err(dev, "failed to request irq %d\n", ret);
+		goto clk_disable;
+	}
+
+	/*
+	 * Check hardware revision, we only support U8500v2 version
+	 * as this was the only version used for mass market deployment,
+	 * but surely you can add more versions if you have them and
+	 * need them.
+	 */
+	pid = readl(mcde->regs + MCDE_PID);
+	dev_info(dev, "found MCDE HW revision %d.%d (dev %d, metal fix %d)\n",
+		 (pid & MCDE_PID_MAJOR_VERSION_MASK)
+		 >> MCDE_PID_MAJOR_VERSION_SHIFT,
+		 (pid & MCDE_PID_MINOR_VERSION_MASK)
+		 >> MCDE_PID_MINOR_VERSION_SHIFT,
+		 (pid & MCDE_PID_DEVELOPMENT_VERSION_MASK)
+		 >> MCDE_PID_DEVELOPMENT_VERSION_SHIFT,
+		 (pid & MCDE_PID_METALFIX_VERSION_MASK)
+		 >> MCDE_PID_METALFIX_VERSION_SHIFT);
+	if (pid != 0x03000800) {
+		dev_err(dev, "unsupported hardware revision\n");
+		ret = -ENODEV;
+		goto clk_disable;
+	}
+
+	/* Disable and clear any pending interrupts */
+	mcde_display_disable_irqs(mcde);
+	writel(0, mcde->regs + MCDE_IMSCERR);
+	writel(0xFFFFFFFF, mcde->regs + MCDE_RISERR);
+
+	/* Spawn child devices for the DSI ports */
+	devm_of_platform_populate(dev);
+
+	/* Create something that will match the subdrivers when we bind */
+	for (i = 0; i < ARRAY_SIZE(mcde_component_drivers); i++) {
+		struct device_driver *drv = &mcde_component_drivers[i]->driver;
+		struct device *p = NULL, *d;
+
+		while ((d = platform_find_device_by_driver(p, drv))) {
+			put_device(p);
+			component_match_add(dev, &match, mcde_compare_dev, d);
+			p = d;
+		}
+		put_device(p);
+	}
+	if (!match) {
+		dev_err(dev, "no matching components\n");
+		ret = -ENODEV;
+		goto clk_disable;
+	}
+	if (IS_ERR(match)) {
+		dev_err(dev, "could not create component match\n");
+		ret = PTR_ERR(match);
+		goto clk_disable;
+	}
+
+	/*
+	 * Perform an invasive reset of the MCDE and all blocks by
+	 * cutting the power to the subsystem, then bring it back up
+	 * later when we enable the display as a result of
+	 * component_master_add_with_match().
+	 */
+	ret = regulator_disable(mcde->epod);
+	if (ret) {
+		dev_err(dev, "can't disable EPOD regulator\n");
+		return ret;
+	}
+	/* Wait 50 ms so we are sure we cut the power */
+	usleep_range(50000, 70000);
+
+	ret = component_master_add_with_match(&pdev->dev, &mcde_drm_comp_ops,
+					      match);
+	if (ret) {
+		dev_err(dev, "failed to add component master\n");
+		/*
+		 * The EPOD regulator is already disabled at this point so some
+		 * special errorpath code is needed
+		 */
+		clk_disable_unprepare(mcde->mcde_clk);
+		regulator_disable(mcde->vana);
+		return ret;
+	}
+
+	return 0;
+
+clk_disable:
+	clk_disable_unprepare(mcde->mcde_clk);
+regulator_off:
+	regulator_disable(mcde->vana);
+regulator_epod_off:
+	regulator_disable(mcde->epod);
+	return ret;
+
+}
+
+static int mcde_remove(struct platform_device *pdev)
+{
+	struct drm_device *drm = platform_get_drvdata(pdev);
+	struct mcde *mcde = to_mcde(drm);
+
+	component_master_del(&pdev->dev, &mcde_drm_comp_ops);
+	clk_disable_unprepare(mcde->mcde_clk);
+	regulator_disable(mcde->vana);
+	regulator_disable(mcde->epod);
+
+	return 0;
+}
+
+static const struct of_device_id mcde_of_match[] = {
+	{
+		.compatible = "ste,mcde",
+	},
+	{},
+};
+
+static struct platform_driver mcde_driver = {
+	.driver = {
+		.name           = "mcde",
+		.of_match_table = of_match_ptr(mcde_of_match),
+	},
+	.probe = mcde_probe,
+	.remove = mcde_remove,
+};
+
+static struct platform_driver *const component_drivers[] = {
+	&mcde_dsi_driver,
+};
+
+static int __init mcde_drm_register(void)
+{
+	int ret;
+
+	ret = platform_register_drivers(component_drivers,
+					ARRAY_SIZE(component_drivers));
+	if (ret)
+		return ret;
+
+	return platform_driver_register(&mcde_driver);
+}
+
+static void __exit mcde_drm_unregister(void)
+{
+	platform_unregister_drivers(component_drivers,
+				    ARRAY_SIZE(component_drivers));
+	platform_driver_unregister(&mcde_driver);
+}
+
+module_init(mcde_drm_register);
+module_exit(mcde_drm_unregister);
+
+MODULE_ALIAS("platform:mcde-drm");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/mcde/mcde_dsi.c b/drivers/gpu/drm/mcde/mcde_dsi.c
new file mode 100644
index 000000000..64e6fb806
--- /dev/null
+++ b/drivers/gpu/drm/mcde/mcde_dsi.c
@@ -0,0 +1,1246 @@
+// SPDX-License-Identifier: GPL-2.0+
+#include <linux/clk.h>
+#include <linux/component.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <video/mipi_display.h>
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_bridge.h>
+#include <drm/drm_device.h>
+#include <drm/drm_drv.h>
+#include <drm/drm_encoder.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modeset_helper_vtables.h>
+#include <drm/drm_of.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_print.h>
+#include <drm/drm_probe_helper.h>
+
+#include "mcde_drm.h"
+#include "mcde_dsi_regs.h"
+
+#define DSI_DEFAULT_LP_FREQ_HZ	19200000
+#define DSI_DEFAULT_HS_FREQ_HZ	420160000
+
+/* PRCMU DSI reset registers */
+#define PRCM_DSI_SW_RESET 0x324
+#define PRCM_DSI_SW_RESET_DSI0_SW_RESETN BIT(0)
+#define PRCM_DSI_SW_RESET_DSI1_SW_RESETN BIT(1)
+#define PRCM_DSI_SW_RESET_DSI2_SW_RESETN BIT(2)
+
+struct mcde_dsi {
+	struct device *dev;
+	struct mcde *mcde;
+	struct drm_bridge bridge;
+	struct drm_panel *panel;
+	struct drm_bridge *bridge_out;
+	struct mipi_dsi_host dsi_host;
+	struct mipi_dsi_device *mdsi;
+	const struct drm_display_mode *mode;
+	struct clk *hs_clk;
+	struct clk *lp_clk;
+	unsigned long hs_freq;
+	unsigned long lp_freq;
+	bool unused;
+
+	void __iomem *regs;
+	struct regmap *prcmu;
+};
+
+static inline struct mcde_dsi *bridge_to_mcde_dsi(struct drm_bridge *bridge)
+{
+	return container_of(bridge, struct mcde_dsi, bridge);
+}
+
+static inline struct mcde_dsi *host_to_mcde_dsi(struct mipi_dsi_host *h)
+{
+	return container_of(h, struct mcde_dsi, dsi_host);
+}
+
+bool mcde_dsi_irq(struct mipi_dsi_device *mdsi)
+{
+	struct mcde_dsi *d;
+	u32 val;
+	bool te_received = false;
+
+	d = host_to_mcde_dsi(mdsi->host);
+
+	dev_dbg(d->dev, "%s called\n", __func__);
+
+	val = readl(d->regs + DSI_DIRECT_CMD_STS_FLAG);
+	if (val)
+		dev_dbg(d->dev, "DSI_DIRECT_CMD_STS_FLAG = %08x\n", val);
+	if (val & DSI_DIRECT_CMD_STS_WRITE_COMPLETED)
+		dev_dbg(d->dev, "direct command write completed\n");
+	if (val & DSI_DIRECT_CMD_STS_TE_RECEIVED) {
+		te_received = true;
+		dev_dbg(d->dev, "direct command TE received\n");
+	}
+	if (val & DSI_DIRECT_CMD_STS_ACKNOWLEDGE_WITH_ERR_RECEIVED)
+		dev_err(d->dev, "direct command ACK ERR received\n");
+	if (val & DSI_DIRECT_CMD_STS_READ_COMPLETED_WITH_ERR)
+		dev_err(d->dev, "direct command read ERR received\n");
+	/* Mask off the ACK value and clear status */
+	writel(val, d->regs + DSI_DIRECT_CMD_STS_CLR);
+
+	val = readl(d->regs + DSI_CMD_MODE_STS_FLAG);
+	if (val)
+		dev_dbg(d->dev, "DSI_CMD_MODE_STS_FLAG = %08x\n", val);
+	if (val & DSI_CMD_MODE_STS_ERR_NO_TE)
+		/* This happens all the time (safe to ignore) */
+		dev_dbg(d->dev, "CMD mode no TE\n");
+	if (val & DSI_CMD_MODE_STS_ERR_TE_MISS)
+		/* This happens all the time (safe to ignore) */
+		dev_dbg(d->dev, "CMD mode TE miss\n");
+	if (val & DSI_CMD_MODE_STS_ERR_SDI1_UNDERRUN)
+		dev_err(d->dev, "CMD mode SD1 underrun\n");
+	if (val & DSI_CMD_MODE_STS_ERR_SDI2_UNDERRUN)
+		dev_err(d->dev, "CMD mode SD2 underrun\n");
+	if (val & DSI_CMD_MODE_STS_ERR_UNWANTED_RD)
+		dev_err(d->dev, "CMD mode unwanted RD\n");
+	writel(val, d->regs + DSI_CMD_MODE_STS_CLR);
+
+	val = readl(d->regs + DSI_DIRECT_CMD_RD_STS_FLAG);
+	if (val)
+		dev_dbg(d->dev, "DSI_DIRECT_CMD_RD_STS_FLAG = %08x\n", val);
+	writel(val, d->regs + DSI_DIRECT_CMD_RD_STS_CLR);
+
+	val = readl(d->regs + DSI_TG_STS_FLAG);
+	if (val)
+		dev_dbg(d->dev, "DSI_TG_STS_FLAG = %08x\n", val);
+	writel(val, d->regs + DSI_TG_STS_CLR);
+
+	val = readl(d->regs + DSI_VID_MODE_STS_FLAG);
+	if (val)
+		dev_dbg(d->dev, "DSI_VID_MODE_STS_FLAG = %08x\n", val);
+	if (val & DSI_VID_MODE_STS_VSG_RUNNING)
+		dev_dbg(d->dev, "VID mode VSG running\n");
+	if (val & DSI_VID_MODE_STS_ERR_MISSING_DATA)
+		dev_err(d->dev, "VID mode missing data\n");
+	if (val & DSI_VID_MODE_STS_ERR_MISSING_HSYNC)
+		dev_err(d->dev, "VID mode missing HSYNC\n");
+	if (val & DSI_VID_MODE_STS_ERR_MISSING_VSYNC)
+		dev_err(d->dev, "VID mode missing VSYNC\n");
+	if (val & DSI_VID_MODE_STS_REG_ERR_SMALL_LENGTH)
+		dev_err(d->dev, "VID mode less bytes than expected between two HSYNC\n");
+	if (val & DSI_VID_MODE_STS_REG_ERR_SMALL_HEIGHT)
+		dev_err(d->dev, "VID mode less lines than expected between two VSYNC\n");
+	if (val & (DSI_VID_MODE_STS_ERR_BURSTWRITE |
+		   DSI_VID_MODE_STS_ERR_LINEWRITE |
+		   DSI_VID_MODE_STS_ERR_LONGREAD))
+		dev_err(d->dev, "VID mode read/write error\n");
+	if (val & DSI_VID_MODE_STS_ERR_VRS_WRONG_LENGTH)
+		dev_err(d->dev, "VID mode received packets differ from expected size\n");
+	if (val & DSI_VID_MODE_STS_VSG_RECOVERY)
+		dev_err(d->dev, "VID mode VSG in recovery mode\n");
+	writel(val, d->regs + DSI_VID_MODE_STS_CLR);
+
+	return te_received;
+}
+
+static void mcde_dsi_attach_to_mcde(struct mcde_dsi *d)
+{
+	d->mcde->mdsi = d->mdsi;
+
+	/*
+	 * Select the way the DSI data flow is pushing to the display:
+	 * currently we just support video or command mode depending
+	 * on the type of display. Video mode defaults to using the
+	 * formatter itself for synchronization (stateless video panel).
+	 *
+	 * FIXME: add flags to struct mipi_dsi_device .flags to indicate
+	 * displays that require BTA (bus turn around) so we can handle
+	 * such displays as well. Figure out how to properly handle
+	 * single frame on-demand updates with DRM for command mode
+	 * displays (MCDE_COMMAND_ONESHOT_FLOW).
+	 */
+	if (d->mdsi->mode_flags & MIPI_DSI_MODE_VIDEO)
+		d->mcde->flow_mode = MCDE_VIDEO_FORMATTER_FLOW;
+	else
+		d->mcde->flow_mode = MCDE_COMMAND_TE_FLOW;
+}
+
+static int mcde_dsi_host_attach(struct mipi_dsi_host *host,
+				struct mipi_dsi_device *mdsi)
+{
+	struct mcde_dsi *d = host_to_mcde_dsi(host);
+
+	if (mdsi->lanes < 1 || mdsi->lanes > 2) {
+		DRM_ERROR("dsi device params invalid, 1 or 2 lanes supported\n");
+		return -EINVAL;
+	}
+
+	dev_info(d->dev, "attached DSI device with %d lanes\n", mdsi->lanes);
+	/* MIPI_DSI_FMT_RGB88 etc */
+	dev_info(d->dev, "format %08x, %dbpp\n", mdsi->format,
+		 mipi_dsi_pixel_format_to_bpp(mdsi->format));
+	dev_info(d->dev, "mode flags: %08lx\n", mdsi->mode_flags);
+
+	d->mdsi = mdsi;
+	if (d->mcde)
+		mcde_dsi_attach_to_mcde(d);
+
+	return 0;
+}
+
+static int mcde_dsi_host_detach(struct mipi_dsi_host *host,
+				struct mipi_dsi_device *mdsi)
+{
+	struct mcde_dsi *d = host_to_mcde_dsi(host);
+
+	d->mdsi = NULL;
+	if (d->mcde)
+		d->mcde->mdsi = NULL;
+
+	return 0;
+}
+
+#define MCDE_DSI_HOST_IS_READ(type)			    \
+	((type == MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM) || \
+	 (type == MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM) || \
+	 (type == MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM) || \
+	 (type == MIPI_DSI_DCS_READ))
+
+static int mcde_dsi_execute_transfer(struct mcde_dsi *d,
+				     const struct mipi_dsi_msg *msg)
+{
+	const u32 loop_delay_us = 10; /* us */
+	u32 loop_counter;
+	size_t txlen = msg->tx_len;
+	size_t rxlen = msg->rx_len;
+	int i;
+	u32 val;
+	int ret;
+
+	writel(~0, d->regs + DSI_DIRECT_CMD_STS_CLR);
+	writel(~0, d->regs + DSI_CMD_MODE_STS_CLR);
+	/* Send command */
+	writel(1, d->regs + DSI_DIRECT_CMD_SEND);
+
+	loop_counter = 1000 * 1000 / loop_delay_us;
+	if (MCDE_DSI_HOST_IS_READ(msg->type)) {
+		/* Read command */
+		while (!(readl(d->regs + DSI_DIRECT_CMD_STS) &
+			 (DSI_DIRECT_CMD_STS_READ_COMPLETED |
+			  DSI_DIRECT_CMD_STS_READ_COMPLETED_WITH_ERR))
+		       && --loop_counter)
+			usleep_range(loop_delay_us, (loop_delay_us * 3) / 2);
+		if (!loop_counter) {
+			dev_err(d->dev, "DSI read timeout!\n");
+			/* Set exit code and retry */
+			return -ETIME;
+		}
+	} else {
+		/* Writing only */
+		while (!(readl(d->regs + DSI_DIRECT_CMD_STS) &
+			 DSI_DIRECT_CMD_STS_WRITE_COMPLETED)
+		       && --loop_counter)
+			usleep_range(loop_delay_us, (loop_delay_us * 3) / 2);
+
+		if (!loop_counter) {
+			/* Set exit code and retry */
+			dev_err(d->dev, "DSI write timeout!\n");
+			return -ETIME;
+		}
+	}
+
+	val = readl(d->regs + DSI_DIRECT_CMD_STS);
+	if (val & DSI_DIRECT_CMD_STS_READ_COMPLETED_WITH_ERR) {
+		dev_err(d->dev, "read completed with error\n");
+		writel(1, d->regs + DSI_DIRECT_CMD_RD_INIT);
+		return -EIO;
+	}
+	if (val & DSI_DIRECT_CMD_STS_ACKNOWLEDGE_WITH_ERR_RECEIVED) {
+		val >>= DSI_DIRECT_CMD_STS_ACK_VAL_SHIFT;
+		dev_err(d->dev, "error during transmission: %04x\n",
+			val);
+		return -EIO;
+	}
+
+	if (!MCDE_DSI_HOST_IS_READ(msg->type)) {
+		/* Return number of bytes written */
+		ret = txlen;
+	} else {
+		/* OK this is a read command, get the response */
+		u32 rdsz;
+		u32 rddat;
+		u8 *rx = msg->rx_buf;
+
+		rdsz = readl(d->regs + DSI_DIRECT_CMD_RD_PROPERTY);
+		rdsz &= DSI_DIRECT_CMD_RD_PROPERTY_RD_SIZE_MASK;
+		rddat = readl(d->regs + DSI_DIRECT_CMD_RDDAT);
+		if (rdsz < rxlen) {
+			dev_err(d->dev, "read error, requested %zd got %d\n",
+				rxlen, rdsz);
+			return -EIO;
+		}
+		/* FIXME: read more than 4 bytes */
+		for (i = 0; i < 4 && i < rxlen; i++)
+			rx[i] = (rddat >> (i * 8)) & 0xff;
+		ret = rdsz;
+	}
+
+	/* Successful transmission */
+	return ret;
+}
+
+static ssize_t mcde_dsi_host_transfer(struct mipi_dsi_host *host,
+				      const struct mipi_dsi_msg *msg)
+{
+	struct mcde_dsi *d = host_to_mcde_dsi(host);
+	const u8 *tx = msg->tx_buf;
+	size_t txlen = msg->tx_len;
+	size_t rxlen = msg->rx_len;
+	unsigned int retries = 0;
+	u32 val;
+	int ret;
+	int i;
+
+	if (txlen > 16) {
+		dev_err(d->dev,
+			"dunno how to write more than 16 bytes yet\n");
+		return -EIO;
+	}
+	if (rxlen > 4) {
+		dev_err(d->dev,
+			"dunno how to read more than 4 bytes yet\n");
+		return -EIO;
+	}
+
+	dev_dbg(d->dev,
+		"message to channel %d, write %zd bytes read %zd bytes\n",
+		msg->channel, txlen, rxlen);
+
+	/* Command "nature" */
+	if (MCDE_DSI_HOST_IS_READ(msg->type))
+		/* MCTL_MAIN_DATA_CTL already set up */
+		val = DSI_DIRECT_CMD_MAIN_SETTINGS_CMD_NAT_READ;
+	else
+		val = DSI_DIRECT_CMD_MAIN_SETTINGS_CMD_NAT_WRITE;
+	/*
+	 * More than 2 bytes will not fit in a single packet, so it's
+	 * time to set the "long not short" bit. One byte is used by
+	 * the MIPI DCS command leaving just one byte for the payload
+	 * in a short package.
+	 */
+	if (mipi_dsi_packet_format_is_long(msg->type))
+		val |= DSI_DIRECT_CMD_MAIN_SETTINGS_CMD_LONGNOTSHORT;
+	val |= 0 << DSI_DIRECT_CMD_MAIN_SETTINGS_CMD_ID_SHIFT;
+	val |= txlen << DSI_DIRECT_CMD_MAIN_SETTINGS_CMD_SIZE_SHIFT;
+	val |= DSI_DIRECT_CMD_MAIN_SETTINGS_CMD_LP_EN;
+	val |= msg->type << DSI_DIRECT_CMD_MAIN_SETTINGS_CMD_HEAD_SHIFT;
+	writel(val, d->regs + DSI_DIRECT_CMD_MAIN_SETTINGS);
+
+	/* MIPI DCS command is part of the data */
+	if (txlen > 0) {
+		val = 0;
+		for (i = 0; i < 4 && i < txlen; i++)
+			val |= tx[i] << (i * 8);
+	}
+	writel(val, d->regs + DSI_DIRECT_CMD_WRDAT0);
+	if (txlen > 4) {
+		val = 0;
+		for (i = 0; i < 4 && (i + 4) < txlen; i++)
+			val |= tx[i + 4] << (i * 8);
+		writel(val, d->regs + DSI_DIRECT_CMD_WRDAT1);
+	}
+	if (txlen > 8) {
+		val = 0;
+		for (i = 0; i < 4 && (i + 8) < txlen; i++)
+			val |= tx[i + 8] << (i * 8);
+		writel(val, d->regs + DSI_DIRECT_CMD_WRDAT2);
+	}
+	if (txlen > 12) {
+		val = 0;
+		for (i = 0; i < 4 && (i + 12) < txlen; i++)
+			val |= tx[i + 12] << (i * 8);
+		writel(val, d->regs + DSI_DIRECT_CMD_WRDAT3);
+	}
+
+	while (retries < 3) {
+		ret = mcde_dsi_execute_transfer(d, msg);
+		if (ret >= 0)
+			break;
+		retries++;
+	}
+	if (ret < 0 && retries)
+		dev_err(d->dev, "gave up after %d retries\n", retries);
+
+	/* Clear any errors */
+	writel(~0, d->regs + DSI_DIRECT_CMD_STS_CLR);
+	writel(~0, d->regs + DSI_CMD_MODE_STS_CLR);
+
+	return ret;
+}
+
+static const struct mipi_dsi_host_ops mcde_dsi_host_ops = {
+	.attach = mcde_dsi_host_attach,
+	.detach = mcde_dsi_host_detach,
+	.transfer = mcde_dsi_host_transfer,
+};
+
+/* This sends a direct (short) command to request TE */
+void mcde_dsi_te_request(struct mipi_dsi_device *mdsi)
+{
+	struct mcde_dsi *d;
+	u32 val;
+
+	d = host_to_mcde_dsi(mdsi->host);
+
+	/* Command "nature" TE request */
+	val = DSI_DIRECT_CMD_MAIN_SETTINGS_CMD_NAT_TE_REQ;
+	val |= 0 << DSI_DIRECT_CMD_MAIN_SETTINGS_CMD_ID_SHIFT;
+	val |= 2 << DSI_DIRECT_CMD_MAIN_SETTINGS_CMD_SIZE_SHIFT;
+	val |= DSI_DIRECT_CMD_MAIN_SETTINGS_CMD_LP_EN;
+	val |= MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM <<
+		DSI_DIRECT_CMD_MAIN_SETTINGS_CMD_HEAD_SHIFT;
+	writel(val, d->regs + DSI_DIRECT_CMD_MAIN_SETTINGS);
+
+	/* Clear TE reveived and error status bits and enables them */
+	writel(DSI_DIRECT_CMD_STS_CLR_TE_RECEIVED_CLR |
+	       DSI_DIRECT_CMD_STS_CLR_ACKNOWLEDGE_WITH_ERR_RECEIVED_CLR,
+	       d->regs + DSI_DIRECT_CMD_STS_CLR);
+	val = readl(d->regs + DSI_DIRECT_CMD_STS_CTL);
+	val |= DSI_DIRECT_CMD_STS_CTL_TE_RECEIVED_EN;
+	val |= DSI_DIRECT_CMD_STS_CTL_ACKNOWLEDGE_WITH_ERR_EN;
+	writel(val, d->regs + DSI_DIRECT_CMD_STS_CTL);
+
+	/* Clear and enable no TE or TE missing status */
+	writel(DSI_CMD_MODE_STS_CLR_ERR_NO_TE_CLR |
+	       DSI_CMD_MODE_STS_CLR_ERR_TE_MISS_CLR,
+	       d->regs + DSI_CMD_MODE_STS_CLR);
+	val = readl(d->regs + DSI_CMD_MODE_STS_CTL);
+	val |= DSI_CMD_MODE_STS_CTL_ERR_NO_TE_EN;
+	val |= DSI_CMD_MODE_STS_CTL_ERR_TE_MISS_EN;
+	writel(val, d->regs + DSI_CMD_MODE_STS_CTL);
+
+	/* Send this TE request command */
+	writel(1, d->regs + DSI_DIRECT_CMD_SEND);
+}
+
+static void mcde_dsi_setup_video_mode(struct mcde_dsi *d,
+				      const struct drm_display_mode *mode)
+{
+	/* cpp, characters per pixel, number of bytes per pixel */
+	u8 cpp = mipi_dsi_pixel_format_to_bpp(d->mdsi->format) / 8;
+	u64 pclk;
+	u64 bpl;
+	int hfp;
+	int hbp;
+	int hsa;
+	u32 blkline_pck, line_duration;
+	u32 val;
+
+	val = 0;
+	if (d->mdsi->mode_flags & MIPI_DSI_MODE_VIDEO_BURST)
+		val |= DSI_VID_MAIN_CTL_BURST_MODE;
+	if (d->mdsi->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE) {
+		val |= DSI_VID_MAIN_CTL_SYNC_PULSE_ACTIVE;
+		val |= DSI_VID_MAIN_CTL_SYNC_PULSE_HORIZONTAL;
+	}
+	/* RGB header and pixel mode */
+	switch (d->mdsi->format) {
+	case MIPI_DSI_FMT_RGB565:
+		val |= MIPI_DSI_PACKED_PIXEL_STREAM_16 <<
+			DSI_VID_MAIN_CTL_HEADER_SHIFT;
+		val |= DSI_VID_MAIN_CTL_VID_PIXEL_MODE_16BITS;
+		break;
+	case MIPI_DSI_FMT_RGB666_PACKED:
+		val |= MIPI_DSI_PACKED_PIXEL_STREAM_18 <<
+			DSI_VID_MAIN_CTL_HEADER_SHIFT;
+		val |= DSI_VID_MAIN_CTL_VID_PIXEL_MODE_18BITS;
+		break;
+	case MIPI_DSI_FMT_RGB666:
+		val |= MIPI_DSI_PIXEL_STREAM_3BYTE_18
+			<< DSI_VID_MAIN_CTL_HEADER_SHIFT;
+		val |= DSI_VID_MAIN_CTL_VID_PIXEL_MODE_18BITS_LOOSE;
+		break;
+	case MIPI_DSI_FMT_RGB888:
+		val |= MIPI_DSI_PACKED_PIXEL_STREAM_24 <<
+			DSI_VID_MAIN_CTL_HEADER_SHIFT;
+		val |= DSI_VID_MAIN_CTL_VID_PIXEL_MODE_24BITS;
+		break;
+	default:
+		dev_err(d->dev, "unknown pixel mode\n");
+		return;
+	}
+
+	/* TODO: TVG (test video generator) could be enabled here */
+
+	/*
+	 * During vertical blanking: go to LP mode
+	 * Like with the EOL setting, if this is not set, the EOL area will be
+	 * filled with NULL or blanking packets in the vblank area.
+	 * FIXME: some Samsung phones and display panels such as s6e63m0 use
+	 * DSI_VID_MAIN_CTL_REG_BLKLINE_MODE_BLANKING here instead,
+	 * figure out how to properly configure that from the panel.
+	 */
+	val |= DSI_VID_MAIN_CTL_REG_BLKLINE_MODE_LP_0;
+	/*
+	 * During EOL: go to LP mode. If this is not set, the EOL area will be
+	 * filled with NULL or blanking packets.
+	 */
+	val |= DSI_VID_MAIN_CTL_REG_BLKEOL_MODE_LP_0;
+	/* Recovery mode 1 */
+	val |= 1 << DSI_VID_MAIN_CTL_RECOVERY_MODE_SHIFT;
+	/* All other fields zero */
+	writel(val, d->regs + DSI_VID_MAIN_CTL);
+
+	/* Vertical frame parameters are pretty straight-forward */
+	val = mode->vdisplay << DSI_VID_VSIZE_VACT_LENGTH_SHIFT;
+	/* vertical front porch */
+	val |= (mode->vsync_start - mode->vdisplay)
+		<< DSI_VID_VSIZE_VFP_LENGTH_SHIFT;
+	/* vertical sync active */
+	val |= (mode->vsync_end - mode->vsync_start)
+		<< DSI_VID_VSIZE_VSA_LENGTH_SHIFT;
+	/* vertical back porch */
+	val |= (mode->vtotal - mode->vsync_end)
+		<< DSI_VID_VSIZE_VBP_LENGTH_SHIFT;
+	writel(val, d->regs + DSI_VID_VSIZE);
+
+	/*
+	 * Horizontal frame parameters:
+	 * horizontal resolution is given in pixels but must be re-calculated
+	 * into bytes since this is what the hardware expects, these registers
+	 * define the payload size of the packet.
+	 *
+	 * hfp = horizontal front porch in bytes
+	 * hbp = horizontal back porch in bytes
+	 * hsa = horizontal sync active in bytes
+	 *
+	 * 6 + 2 is HFP header + checksum
+	 */
+	hfp = (mode->hsync_start - mode->hdisplay) * cpp - 6 - 2;
+	if (d->mdsi->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE) {
+		/*
+		 * Use sync pulse for sync: explicit HSA time
+		 * 6 is HBP header + checksum
+		 * 4 is RGB header + checksum
+		 */
+		hbp = (mode->htotal - mode->hsync_end) * cpp - 4 - 6;
+		/*
+		 * 6 is HBP header + checksum
+		 * 4 is HSW packet bytes
+		 * 4 is RGB header + checksum
+		 */
+		hsa = (mode->hsync_end - mode->hsync_start) * cpp - 4 - 4 - 6;
+	} else {
+		/*
+		 * Use event for sync: HBP includes both back porch and sync
+		 * 6 is HBP header + checksum
+		 * 4 is HSW packet bytes
+		 * 4 is RGB header + checksum
+		 */
+		hbp = (mode->htotal - mode->hsync_start) * cpp - 4 - 4 - 6;
+		/* HSA is not present in this mode and set to 0 */
+		hsa = 0;
+	}
+	if (hfp < 0) {
+		dev_info(d->dev, "hfp negative, set to 0\n");
+		hfp = 0;
+	}
+	if (hbp < 0) {
+		dev_info(d->dev, "hbp negative, set to 0\n");
+		hbp = 0;
+	}
+	if (hsa < 0) {
+		dev_info(d->dev, "hsa negative, set to 0\n");
+		hsa = 0;
+	}
+	dev_dbg(d->dev, "hfp: %u, hbp: %u, hsa: %u bytes\n",
+		hfp, hbp, hsa);
+
+	/* Frame parameters: horizontal sync active */
+	val = hsa << DSI_VID_HSIZE1_HSA_LENGTH_SHIFT;
+	/* horizontal back porch */
+	val |= hbp << DSI_VID_HSIZE1_HBP_LENGTH_SHIFT;
+	/* horizontal front porch */
+	val |= hfp << DSI_VID_HSIZE1_HFP_LENGTH_SHIFT;
+	writel(val, d->regs + DSI_VID_HSIZE1);
+
+	/* RGB data length (visible bytes on one scanline) */
+	val = mode->hdisplay * cpp;
+	writel(val, d->regs + DSI_VID_HSIZE2);
+	dev_dbg(d->dev, "RGB length, visible area on a line: %u bytes\n", val);
+
+	/*
+	 * Calculate the time between two pixels in picoseconds using
+	 * the supplied refresh rate and total resolution including
+	 * porches and sync.
+	 */
+	/* (ps/s) / (pixels/s) = ps/pixels */
+	pclk = DIV_ROUND_UP_ULL(1000000000000, (mode->clock * 1000));
+	dev_dbg(d->dev, "picoseconds between two pixels: %llu\n",
+		pclk);
+
+	/*
+	 * How many bytes per line will this update frequency yield?
+	 *
+	 * Calculate the number of picoseconds for one scanline (1), then
+	 * divide by 1000000000000 (2) to get in pixels per second we
+	 * want to output.
+	 *
+	 * Multiply with number of bytes per second at this video display
+	 * frequency (3) to get number of bytes transferred during this
+	 * time. Notice that we use the frequency the display wants,
+	 * not what we actually get from the DSI PLL, which is hs_freq.
+	 *
+	 * These arithmetics are done in a different order to avoid
+	 * overflow.
+	 */
+	bpl = pclk * mode->htotal; /* (1) picoseconds per line */
+	dev_dbg(d->dev, "picoseconds per line: %llu\n", bpl);
+	/* Multiply with bytes per second (3) */
+	bpl *= (d->mdsi->hs_rate / 8);
+	/* Pixels per second (2) */
+	bpl = DIV_ROUND_DOWN_ULL(bpl, 1000000); /* microseconds */
+	bpl = DIV_ROUND_DOWN_ULL(bpl, 1000000); /* seconds */
+	/* parallel transactions in all lanes */
+	bpl *= d->mdsi->lanes;
+	dev_dbg(d->dev,
+		"calculated bytes per line: %llu @ %d Hz with HS %lu Hz\n",
+		bpl, drm_mode_vrefresh(mode), d->mdsi->hs_rate);
+
+	/*
+	 * 6 is header + checksum, header = 4 bytes, checksum = 2 bytes
+	 * 4 is short packet for vsync/hsync
+	 */
+	if (d->mdsi->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE) {
+		/* Set the event packet size to 0 (not used) */
+		writel(0, d->regs + DSI_VID_BLKSIZE1);
+		/*
+		 * FIXME: isn't the hsync width in pixels? The porch and
+		 * sync area size is in pixels here, but this -6
+		 * seems to be for bytes. It looks like this in the vendor
+		 * code though. Is it completely untested?
+		 */
+		blkline_pck = bpl - (mode->hsync_end - mode->hsync_start) - 6;
+		val = blkline_pck << DSI_VID_BLKSIZE2_BLKLINE_PULSE_PCK_SHIFT;
+		writel(val, d->regs + DSI_VID_BLKSIZE2);
+	} else {
+		/* Set the sync pulse packet size to 0 (not used) */
+		writel(0, d->regs + DSI_VID_BLKSIZE2);
+		/* Specifying payload size in bytes (-4-6 from manual) */
+		blkline_pck = bpl - 4 - 6;
+		if (blkline_pck > 0x1FFF)
+			dev_err(d->dev, "blkline_pck too big %d bytes\n",
+				blkline_pck);
+		val = blkline_pck << DSI_VID_BLKSIZE1_BLKLINE_EVENT_PCK_SHIFT;
+		val &= DSI_VID_BLKSIZE1_BLKLINE_EVENT_PCK_MASK;
+		writel(val, d->regs + DSI_VID_BLKSIZE1);
+	}
+
+	/*
+	 * The line duration is used to scale back the frequency from
+	 * the max frequency supported by the HS clock to the desired
+	 * update frequency in vrefresh.
+	 */
+	line_duration = blkline_pck + 6;
+	/*
+	 * The datasheet contains this complex condition to decreasing
+	 * the line duration by 1 under very specific circumstances.
+	 * Here we also imply that LP is used during burst EOL.
+	 */
+	if (d->mdsi->lanes == 2 && (hsa & 0x01) && (hfp & 0x01)
+	    && (d->mdsi->mode_flags & MIPI_DSI_MODE_VIDEO_BURST))
+		line_duration--;
+	line_duration = DIV_ROUND_CLOSEST(line_duration, d->mdsi->lanes);
+	dev_dbg(d->dev, "line duration %u bytes\n", line_duration);
+	val = line_duration << DSI_VID_DPHY_TIME_REG_LINE_DURATION_SHIFT;
+	/*
+	 * This is the time to perform LP->HS on D-PHY
+	 * FIXME: nowhere to get this from: DT property on the DSI?
+	 * The manual says this is "system dependent".
+	 * values like 48 and 72 seen in the vendor code.
+	 */
+	val |= 48 << DSI_VID_DPHY_TIME_REG_WAKEUP_TIME_SHIFT;
+	writel(val, d->regs + DSI_VID_DPHY_TIME);
+
+	/*
+	 * See the manual figure 657 page 2203 for understanding the impact
+	 * of the different burst mode settings.
+	 */
+	if (d->mdsi->mode_flags & MIPI_DSI_MODE_VIDEO_BURST) {
+		int blkeol_pck, blkeol_duration;
+		/*
+		 * Packet size at EOL for burst mode, this is only used
+		 * if DSI_VID_MAIN_CTL_REG_BLKEOL_MODE_LP_0 is NOT set,
+		 * but we instead send NULL or blanking packets at EOL.
+		 * This is given in number of bytes.
+		 *
+		 * See the manual page 2198 for the 13 reg_blkeol_pck bits.
+		 */
+		blkeol_pck = bpl - (mode->htotal * cpp) - 6;
+		if (blkeol_pck < 0) {
+			dev_err(d->dev, "video block does not fit on line!\n");
+			dev_err(d->dev,
+				"calculated bytes per line: %llu @ %d Hz\n",
+				bpl, drm_mode_vrefresh(mode));
+			dev_err(d->dev,
+				"bytes per line (blkline_pck) %u bytes\n",
+				blkline_pck);
+			dev_err(d->dev,
+				"blkeol_pck becomes %d bytes\n", blkeol_pck);
+			return;
+		}
+		dev_dbg(d->dev, "BLKEOL packet: %d bytes\n", blkeol_pck);
+
+		val = readl(d->regs + DSI_VID_BLKSIZE1);
+		val &= ~DSI_VID_BLKSIZE1_BLKEOL_PCK_MASK;
+		val |= blkeol_pck << DSI_VID_BLKSIZE1_BLKEOL_PCK_SHIFT;
+		writel(val, d->regs + DSI_VID_BLKSIZE1);
+		/* Use the same value for exact burst limit */
+		val = blkeol_pck <<
+			DSI_VID_VCA_SETTING2_EXACT_BURST_LIMIT_SHIFT;
+		val &= DSI_VID_VCA_SETTING2_EXACT_BURST_LIMIT_MASK;
+		writel(val, d->regs + DSI_VID_VCA_SETTING2);
+		/*
+		 * This BLKEOL duration is claimed to be the duration in clock
+		 * cycles of the BLLP end-of-line (EOL) period for each line if
+		 * DSI_VID_MAIN_CTL_REG_BLKEOL_MODE_LP_0 is set.
+		 *
+		 * It is hard to trust the manuals' claim that this is in clock
+		 * cycles as we mimic the behaviour of the vendor code, which
+		 * appears to write a number of bytes that would have been
+		 * transferred on a single lane.
+		 *
+		 * See the manual figure 657 page 2203 and page 2198 for the 13
+		 * reg_blkeol_duration bits.
+		 *
+		 * FIXME: should this also be set up also for non-burst mode
+		 * according to figure 565 page 2202?
+		 */
+		blkeol_duration = DIV_ROUND_CLOSEST(blkeol_pck + 6,
+						    d->mdsi->lanes);
+		dev_dbg(d->dev, "BLKEOL duration: %d clock cycles\n",
+			blkeol_duration);
+
+		val = readl(d->regs + DSI_VID_PCK_TIME);
+		val &= ~DSI_VID_PCK_TIME_BLKEOL_DURATION_MASK;
+		val |= blkeol_duration <<
+			DSI_VID_PCK_TIME_BLKEOL_DURATION_SHIFT;
+		writel(val, d->regs + DSI_VID_PCK_TIME);
+
+		/* Max burst limit, this is given in bytes */
+		val = readl(d->regs + DSI_VID_VCA_SETTING1);
+		val &= ~DSI_VID_VCA_SETTING1_MAX_BURST_LIMIT_MASK;
+		val |= (blkeol_pck - 6) <<
+			DSI_VID_VCA_SETTING1_MAX_BURST_LIMIT_SHIFT;
+		writel(val, d->regs + DSI_VID_VCA_SETTING1);
+	}
+
+	/* Maximum line limit */
+	val = readl(d->regs + DSI_VID_VCA_SETTING2);
+	val &= ~DSI_VID_VCA_SETTING2_MAX_LINE_LIMIT_MASK;
+	val |= (blkline_pck - 6) <<
+		DSI_VID_VCA_SETTING2_MAX_LINE_LIMIT_SHIFT;
+	writel(val, d->regs + DSI_VID_VCA_SETTING2);
+	dev_dbg(d->dev, "blkline pck: %d bytes\n", blkline_pck - 6);
+}
+
+static void mcde_dsi_start(struct mcde_dsi *d)
+{
+	unsigned long hs_freq;
+	u32 val;
+	int i;
+
+	/* No integration mode */
+	writel(0, d->regs + DSI_MCTL_INTEGRATION_MODE);
+
+	/* Enable the DSI port, from drivers/video/mcde/dsilink_v2.c */
+	val = DSI_MCTL_MAIN_DATA_CTL_LINK_EN |
+		DSI_MCTL_MAIN_DATA_CTL_BTA_EN |
+		DSI_MCTL_MAIN_DATA_CTL_READ_EN |
+		DSI_MCTL_MAIN_DATA_CTL_REG_TE_EN;
+	if (!(d->mdsi->mode_flags & MIPI_DSI_MODE_EOT_PACKET))
+		val |= DSI_MCTL_MAIN_DATA_CTL_HOST_EOT_GEN;
+	writel(val, d->regs + DSI_MCTL_MAIN_DATA_CTL);
+
+	/* Set a high command timeout, clear other fields */
+	val = 0x3ff << DSI_CMD_MODE_CTL_TE_TIMEOUT_SHIFT;
+	writel(val, d->regs + DSI_CMD_MODE_CTL);
+
+	/*
+	 * UI_X4 is described as "unit interval times four"
+	 * I guess since DSI packets are 4 bytes wide, one unit
+	 * is one byte.
+	 */
+	hs_freq = clk_get_rate(d->hs_clk);
+	hs_freq /= 1000000; /* MHz */
+	val = 4000 / hs_freq;
+	dev_dbg(d->dev, "UI value: %d\n", val);
+	val <<= DSI_MCTL_DPHY_STATIC_UI_X4_SHIFT;
+	val &= DSI_MCTL_DPHY_STATIC_UI_X4_MASK;
+	writel(val, d->regs + DSI_MCTL_DPHY_STATIC);
+
+	/*
+	 * Enable clocking: 0x0f (something?) between each burst,
+	 * enable the second lane if needed, enable continuous clock if
+	 * needed, enable switch into ULPM (ultra-low power mode) on
+	 * all the lines.
+	 */
+	val = 0x0f << DSI_MCTL_MAIN_PHY_CTL_WAIT_BURST_TIME_SHIFT;
+	if (d->mdsi->lanes == 2)
+		val |= DSI_MCTL_MAIN_PHY_CTL_LANE2_EN;
+	if (!(d->mdsi->mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS))
+		val |= DSI_MCTL_MAIN_PHY_CTL_CLK_CONTINUOUS;
+	val |= DSI_MCTL_MAIN_PHY_CTL_CLK_ULPM_EN |
+		DSI_MCTL_MAIN_PHY_CTL_DAT1_ULPM_EN |
+		DSI_MCTL_MAIN_PHY_CTL_DAT2_ULPM_EN;
+	writel(val, d->regs + DSI_MCTL_MAIN_PHY_CTL);
+
+	val = (1 << DSI_MCTL_ULPOUT_TIME_CKLANE_ULPOUT_TIME_SHIFT) |
+		(1 << DSI_MCTL_ULPOUT_TIME_DATA_ULPOUT_TIME_SHIFT);
+	writel(val, d->regs + DSI_MCTL_ULPOUT_TIME);
+
+	writel(DSI_DPHY_LANES_TRIM_DPHY_SPECS_90_81B_0_90,
+	       d->regs + DSI_DPHY_LANES_TRIM);
+
+	/* High PHY timeout */
+	val = (0x0f << DSI_MCTL_DPHY_TIMEOUT_CLK_DIV_SHIFT) |
+		(0x3fff << DSI_MCTL_DPHY_TIMEOUT_HSTX_TO_VAL_SHIFT) |
+		(0x3fff << DSI_MCTL_DPHY_TIMEOUT_LPRX_TO_VAL_SHIFT);
+	writel(val, d->regs + DSI_MCTL_DPHY_TIMEOUT);
+
+	val = DSI_MCTL_MAIN_EN_PLL_START |
+		DSI_MCTL_MAIN_EN_CKLANE_EN |
+		DSI_MCTL_MAIN_EN_DAT1_EN |
+		DSI_MCTL_MAIN_EN_IF1_EN;
+	if (d->mdsi->lanes == 2)
+		val |= DSI_MCTL_MAIN_EN_DAT2_EN;
+	writel(val, d->regs + DSI_MCTL_MAIN_EN);
+
+	/* Wait for the PLL to lock and the clock and data lines to come up */
+	i = 0;
+	val = DSI_MCTL_MAIN_STS_PLL_LOCK |
+		DSI_MCTL_MAIN_STS_CLKLANE_READY |
+		DSI_MCTL_MAIN_STS_DAT1_READY;
+	if (d->mdsi->lanes == 2)
+		val |= DSI_MCTL_MAIN_STS_DAT2_READY;
+	while ((readl(d->regs + DSI_MCTL_MAIN_STS) & val) != val) {
+		/* Sleep for a millisecond */
+		usleep_range(1000, 1500);
+		if (i++ == 100) {
+			dev_warn(d->dev, "DSI lanes did not start up\n");
+			return;
+		}
+	}
+
+	/* TODO needed? */
+
+	/* Command mode, clear IF1 ID */
+	val = readl(d->regs + DSI_CMD_MODE_CTL);
+	/*
+	 * If we enable low-power mode here,
+	 * then display updates become really slow.
+	 */
+	if (d->mdsi->mode_flags & MIPI_DSI_MODE_LPM)
+		val |= DSI_CMD_MODE_CTL_IF1_LP_EN;
+	val &= ~DSI_CMD_MODE_CTL_IF1_ID_MASK;
+	writel(val, d->regs + DSI_CMD_MODE_CTL);
+
+	/* Wait for DSI PHY to initialize */
+	usleep_range(100, 200);
+	dev_info(d->dev, "DSI link enabled\n");
+}
+
+/*
+ * Notice that this is called from inside the display controller
+ * and not from the bridge callbacks.
+ */
+void mcde_dsi_enable(struct drm_bridge *bridge)
+{
+	struct mcde_dsi *d = bridge_to_mcde_dsi(bridge);
+	unsigned long hs_freq, lp_freq;
+	u32 val;
+	int ret;
+
+	/* Copy maximum clock frequencies */
+	if (d->mdsi->lp_rate)
+		lp_freq = d->mdsi->lp_rate;
+	else
+		lp_freq = DSI_DEFAULT_LP_FREQ_HZ;
+	if (d->mdsi->hs_rate)
+		hs_freq = d->mdsi->hs_rate;
+	else
+		hs_freq = DSI_DEFAULT_HS_FREQ_HZ;
+
+	/* Enable LP (Low Power, Energy Save, ES) and HS (High Speed) clocks */
+	d->lp_freq = clk_round_rate(d->lp_clk, lp_freq);
+	ret = clk_set_rate(d->lp_clk, d->lp_freq);
+	if (ret)
+		dev_err(d->dev, "failed to set LP clock rate %lu Hz\n",
+			d->lp_freq);
+
+	d->hs_freq = clk_round_rate(d->hs_clk, hs_freq);
+	ret = clk_set_rate(d->hs_clk, d->hs_freq);
+	if (ret)
+		dev_err(d->dev, "failed to set HS clock rate %lu Hz\n",
+			d->hs_freq);
+
+	/* Start clocks */
+	ret = clk_prepare_enable(d->lp_clk);
+	if (ret)
+		dev_err(d->dev, "failed to enable LP clock\n");
+	else
+		dev_info(d->dev, "DSI LP clock rate %lu Hz\n",
+			 d->lp_freq);
+	ret = clk_prepare_enable(d->hs_clk);
+	if (ret)
+		dev_err(d->dev, "failed to enable HS clock\n");
+	else
+		dev_info(d->dev, "DSI HS clock rate %lu Hz\n",
+			 d->hs_freq);
+
+	/* Assert RESET through the PRCMU, active low */
+	/* FIXME: which DSI block? */
+	regmap_update_bits(d->prcmu, PRCM_DSI_SW_RESET,
+			   PRCM_DSI_SW_RESET_DSI0_SW_RESETN, 0);
+
+	usleep_range(100, 200);
+
+	/* De-assert RESET again */
+	regmap_update_bits(d->prcmu, PRCM_DSI_SW_RESET,
+			   PRCM_DSI_SW_RESET_DSI0_SW_RESETN,
+			   PRCM_DSI_SW_RESET_DSI0_SW_RESETN);
+
+	/* Start up the hardware */
+	mcde_dsi_start(d);
+
+	if (d->mdsi->mode_flags & MIPI_DSI_MODE_VIDEO) {
+		/* Set up the video mode from the DRM mode */
+		mcde_dsi_setup_video_mode(d, d->mode);
+
+		/* Put IF1 into video mode */
+		val = readl(d->regs + DSI_MCTL_MAIN_DATA_CTL);
+		val |= DSI_MCTL_MAIN_DATA_CTL_IF1_MODE;
+		writel(val, d->regs + DSI_MCTL_MAIN_DATA_CTL);
+
+		/* Disable command mode on IF1 */
+		val = readl(d->regs + DSI_CMD_MODE_CTL);
+		val &= ~DSI_CMD_MODE_CTL_IF1_LP_EN;
+		writel(val, d->regs + DSI_CMD_MODE_CTL);
+
+		/* Enable some error interrupts */
+		val = readl(d->regs + DSI_VID_MODE_STS_CTL);
+		val |= DSI_VID_MODE_STS_CTL_ERR_MISSING_VSYNC;
+		val |= DSI_VID_MODE_STS_CTL_ERR_MISSING_DATA;
+		writel(val, d->regs + DSI_VID_MODE_STS_CTL);
+
+		/* Enable video mode */
+		val = readl(d->regs + DSI_MCTL_MAIN_DATA_CTL);
+		val |= DSI_MCTL_MAIN_DATA_CTL_VID_EN;
+		writel(val, d->regs + DSI_MCTL_MAIN_DATA_CTL);
+	} else {
+		/* Command mode, clear IF1 ID */
+		val = readl(d->regs + DSI_CMD_MODE_CTL);
+		/*
+		 * If we enable low-power mode here
+		 * the display updates become really slow.
+		 */
+		if (d->mdsi->mode_flags & MIPI_DSI_MODE_LPM)
+			val |= DSI_CMD_MODE_CTL_IF1_LP_EN;
+		val &= ~DSI_CMD_MODE_CTL_IF1_ID_MASK;
+		writel(val, d->regs + DSI_CMD_MODE_CTL);
+	}
+
+	dev_info(d->dev, "enabled MCDE DSI master\n");
+}
+
+static void mcde_dsi_bridge_mode_set(struct drm_bridge *bridge,
+				     const struct drm_display_mode *mode,
+				     const struct drm_display_mode *adj)
+{
+	struct mcde_dsi *d = bridge_to_mcde_dsi(bridge);
+
+	if (!d->mdsi) {
+		dev_err(d->dev, "no DSI device attached to encoder!\n");
+		return;
+	}
+
+	d->mode = mode;
+
+	dev_info(d->dev, "set DSI master to %dx%d %u Hz %s mode\n",
+		 mode->hdisplay, mode->vdisplay, mode->clock * 1000,
+		 (d->mdsi->mode_flags & MIPI_DSI_MODE_VIDEO) ? "VIDEO" : "CMD"
+		);
+}
+
+static void mcde_dsi_wait_for_command_mode_stop(struct mcde_dsi *d)
+{
+	u32 val;
+	int i;
+
+	/*
+	 * Wait until we get out of command mode
+	 * CSM = Command State Machine
+	 */
+	i = 0;
+	val = DSI_CMD_MODE_STS_CSM_RUNNING;
+	while ((readl(d->regs + DSI_CMD_MODE_STS) & val) == val) {
+		/* Sleep for a millisecond */
+		usleep_range(1000, 2000);
+		if (i++ == 100) {
+			dev_warn(d->dev,
+				 "could not get out of command mode\n");
+			return;
+		}
+	}
+}
+
+static void mcde_dsi_wait_for_video_mode_stop(struct mcde_dsi *d)
+{
+	u32 val;
+	int i;
+
+	/* Wait until we get out og video mode */
+	i = 0;
+	val = DSI_VID_MODE_STS_VSG_RUNNING;
+	while ((readl(d->regs + DSI_VID_MODE_STS) & val) == val) {
+		/* Sleep for a millisecond */
+		usleep_range(1000, 2000);
+		if (i++ == 100) {
+			dev_warn(d->dev,
+				 "could not get out of video mode\n");
+			return;
+		}
+	}
+}
+
+/*
+ * Notice that this is called from inside the display controller
+ * and not from the bridge callbacks.
+ */
+void mcde_dsi_disable(struct drm_bridge *bridge)
+{
+	struct mcde_dsi *d = bridge_to_mcde_dsi(bridge);
+	u32 val;
+
+	if (d->mdsi->mode_flags & MIPI_DSI_MODE_VIDEO) {
+		/* Stop video mode */
+		val = readl(d->regs + DSI_MCTL_MAIN_DATA_CTL);
+		val &= ~DSI_MCTL_MAIN_DATA_CTL_VID_EN;
+		writel(val, d->regs + DSI_MCTL_MAIN_DATA_CTL);
+		mcde_dsi_wait_for_video_mode_stop(d);
+	} else {
+		/* Stop command mode */
+		mcde_dsi_wait_for_command_mode_stop(d);
+	}
+
+	/*
+	 * Stop clocks and terminate any DSI traffic here so the panel can
+	 * send commands to shut down the display using DSI direct write until
+	 * this point.
+	 */
+
+	/* Disable all error interrupts */
+	writel(0, d->regs + DSI_VID_MODE_STS_CTL);
+	clk_disable_unprepare(d->hs_clk);
+	clk_disable_unprepare(d->lp_clk);
+}
+
+static int mcde_dsi_bridge_attach(struct drm_bridge *bridge,
+				  enum drm_bridge_attach_flags flags)
+{
+	struct mcde_dsi *d = bridge_to_mcde_dsi(bridge);
+	struct drm_device *drm = bridge->dev;
+	int ret;
+
+	if (!drm_core_check_feature(drm, DRIVER_ATOMIC)) {
+		dev_err(d->dev, "we need atomic updates\n");
+		return -ENOTSUPP;
+	}
+
+	/* Attach the DSI bridge to the output (panel etc) bridge */
+	ret = drm_bridge_attach(bridge->encoder, d->bridge_out, bridge, flags);
+	if (ret) {
+		dev_err(d->dev, "failed to attach the DSI bridge\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct drm_bridge_funcs mcde_dsi_bridge_funcs = {
+	.attach = mcde_dsi_bridge_attach,
+	.mode_set = mcde_dsi_bridge_mode_set,
+};
+
+static int mcde_dsi_bind(struct device *dev, struct device *master,
+			 void *data)
+{
+	struct drm_device *drm = data;
+	struct mcde *mcde = to_mcde(drm);
+	struct mcde_dsi *d = dev_get_drvdata(dev);
+	struct device_node *child;
+	struct drm_panel *panel = NULL;
+	struct drm_bridge *bridge = NULL;
+
+	if (!of_get_available_child_count(dev->of_node)) {
+		dev_info(dev, "unused DSI interface\n");
+		d->unused = true;
+		return 0;
+	}
+	d->mcde = mcde;
+	/* If the display attached before binding, set this up */
+	if (d->mdsi)
+		mcde_dsi_attach_to_mcde(d);
+
+	/* Obtain the clocks */
+	d->hs_clk = devm_clk_get(dev, "hs");
+	if (IS_ERR(d->hs_clk)) {
+		dev_err(dev, "unable to get HS clock\n");
+		return PTR_ERR(d->hs_clk);
+	}
+
+	d->lp_clk = devm_clk_get(dev, "lp");
+	if (IS_ERR(d->lp_clk)) {
+		dev_err(dev, "unable to get LP clock\n");
+		return PTR_ERR(d->lp_clk);
+	}
+
+	/* Look for a panel as a child to this node */
+	for_each_available_child_of_node(dev->of_node, child) {
+		panel = of_drm_find_panel(child);
+		if (IS_ERR(panel)) {
+			dev_err(dev, "failed to find panel try bridge (%ld)\n",
+				PTR_ERR(panel));
+			panel = NULL;
+
+			bridge = of_drm_find_bridge(child);
+			if (!bridge) {
+				dev_err(dev, "failed to find bridge\n");
+				of_node_put(child);
+				return -EINVAL;
+			}
+		}
+	}
+	if (panel) {
+		bridge = drm_panel_bridge_add_typed(panel,
+						    DRM_MODE_CONNECTOR_DSI);
+		if (IS_ERR(bridge)) {
+			dev_err(dev, "error adding panel bridge\n");
+			return PTR_ERR(bridge);
+		}
+		dev_info(dev, "connected to panel\n");
+		d->panel = panel;
+	} else if (bridge) {
+		/* TODO: AV8100 HDMI encoder goes here for example */
+		dev_info(dev, "connected to non-panel bridge (unsupported)\n");
+		return -ENODEV;
+	} else {
+		dev_err(dev, "no panel or bridge\n");
+		return -ENODEV;
+	}
+
+	d->bridge_out = bridge;
+
+	/* Create a bridge for this DSI channel */
+	d->bridge.funcs = &mcde_dsi_bridge_funcs;
+	d->bridge.of_node = dev->of_node;
+	drm_bridge_add(&d->bridge);
+
+	/* TODO: first come first serve, use a list */
+	mcde->bridge = &d->bridge;
+
+	dev_info(dev, "initialized MCDE DSI bridge\n");
+
+	return 0;
+}
+
+static void mcde_dsi_unbind(struct device *dev, struct device *master,
+			    void *data)
+{
+	struct mcde_dsi *d = dev_get_drvdata(dev);
+
+	if (d->panel)
+		drm_panel_bridge_remove(d->bridge_out);
+	regmap_update_bits(d->prcmu, PRCM_DSI_SW_RESET,
+			   PRCM_DSI_SW_RESET_DSI0_SW_RESETN, 0);
+}
+
+static const struct component_ops mcde_dsi_component_ops = {
+	.bind   = mcde_dsi_bind,
+	.unbind = mcde_dsi_unbind,
+};
+
+static int mcde_dsi_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct mcde_dsi *d;
+	struct mipi_dsi_host *host;
+	struct resource *res;
+	u32 dsi_id;
+	int ret;
+
+	d = devm_kzalloc(dev, sizeof(*d), GFP_KERNEL);
+	if (!d)
+		return -ENOMEM;
+	d->dev = dev;
+	platform_set_drvdata(pdev, d);
+
+	/* Get a handle on the PRCMU so we can do reset */
+	d->prcmu =
+		syscon_regmap_lookup_by_compatible("stericsson,db8500-prcmu");
+	if (IS_ERR(d->prcmu)) {
+		dev_err(dev, "no PRCMU regmap\n");
+		return PTR_ERR(d->prcmu);
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	d->regs = devm_ioremap_resource(dev, res);
+	if (IS_ERR(d->regs)) {
+		dev_err(dev, "no DSI regs\n");
+		return PTR_ERR(d->regs);
+	}
+
+	dsi_id = readl(d->regs + DSI_ID_REG);
+	dev_info(dev, "HW revision 0x%08x\n", dsi_id);
+
+	host = &d->dsi_host;
+	host->dev = dev;
+	host->ops = &mcde_dsi_host_ops;
+	ret = mipi_dsi_host_register(host);
+	if (ret < 0) {
+		dev_err(dev, "failed to register DSI host: %d\n", ret);
+		return ret;
+	}
+	dev_info(dev, "registered DSI host\n");
+
+	platform_set_drvdata(pdev, d);
+	return component_add(dev, &mcde_dsi_component_ops);
+}
+
+static int mcde_dsi_remove(struct platform_device *pdev)
+{
+	struct mcde_dsi *d = platform_get_drvdata(pdev);
+
+	component_del(&pdev->dev, &mcde_dsi_component_ops);
+	mipi_dsi_host_unregister(&d->dsi_host);
+
+	return 0;
+}
+
+static const struct of_device_id mcde_dsi_of_match[] = {
+	{
+		.compatible = "ste,mcde-dsi",
+	},
+	{},
+};
+
+struct platform_driver mcde_dsi_driver = {
+	.driver = {
+		.name           = "mcde-dsi",
+		.of_match_table = of_match_ptr(mcde_dsi_of_match),
+	},
+	.probe = mcde_dsi_probe,
+	.remove = mcde_dsi_remove,
+};
diff --git a/drivers/gpu/drm/mcde/mcde_dsi_regs.h b/drivers/gpu/drm/mcde/mcde_dsi_regs.h
new file mode 100644
index 000000000..16551af10
--- /dev/null
+++ b/drivers/gpu/drm/mcde/mcde_dsi_regs.h
@@ -0,0 +1,385 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __DRM_MCDE_DSI_REGS
+#define __DRM_MCDE_DSI_REGS
+
+#define DSI_MCTL_INTEGRATION_MODE 0x00000000
+
+#define DSI_MCTL_MAIN_DATA_CTL 0x00000004
+#define DSI_MCTL_MAIN_DATA_CTL_LINK_EN BIT(0)
+#define DSI_MCTL_MAIN_DATA_CTL_IF1_MODE BIT(1)
+#define DSI_MCTL_MAIN_DATA_CTL_VID_EN BIT(2)
+#define DSI_MCTL_MAIN_DATA_CTL_TVG_SEL BIT(3)
+#define DSI_MCTL_MAIN_DATA_CTL_TBG_SEL BIT(4)
+#define DSI_MCTL_MAIN_DATA_CTL_IF1_TE_EN BIT(5)
+#define DSI_MCTL_MAIN_DATA_CTL_IF2_TE_EN BIT(6)
+#define DSI_MCTL_MAIN_DATA_CTL_REG_TE_EN BIT(7)
+#define DSI_MCTL_MAIN_DATA_CTL_READ_EN BIT(8)
+#define DSI_MCTL_MAIN_DATA_CTL_BTA_EN BIT(9)
+#define DSI_MCTL_MAIN_DATA_CTL_DISP_GEN_ECC BIT(10)
+#define DSI_MCTL_MAIN_DATA_CTL_DISP_GEN_CHECKSUM BIT(11)
+#define DSI_MCTL_MAIN_DATA_CTL_HOST_EOT_GEN BIT(12)
+#define DSI_MCTL_MAIN_DATA_CTL_DISP_EOT_GEN BIT(13)
+#define DSI_MCTL_MAIN_DATA_CTL_DLX_REMAP_EN BIT(14)
+#define DSI_MCTL_MAIN_DATA_CTL_TE_POLLING_EN BIT(15)
+
+#define DSI_MCTL_MAIN_PHY_CTL 0x00000008
+#define DSI_MCTL_MAIN_PHY_CTL_LANE2_EN BIT(0)
+#define DSI_MCTL_MAIN_PHY_CTL_FORCE_STOP_MODE BIT(1)
+#define DSI_MCTL_MAIN_PHY_CTL_CLK_CONTINUOUS BIT(2)
+#define DSI_MCTL_MAIN_PHY_CTL_CLK_ULPM_EN BIT(3)
+#define DSI_MCTL_MAIN_PHY_CTL_DAT1_ULPM_EN BIT(4)
+#define DSI_MCTL_MAIN_PHY_CTL_DAT2_ULPM_EN BIT(5)
+#define DSI_MCTL_MAIN_PHY_CTL_WAIT_BURST_TIME_SHIFT 6
+#define DSI_MCTL_MAIN_PHY_CTL_WAIT_BURST_TIME_MASK 0x000003C0
+#define DSI_MCTL_MAIN_PHY_CTL_CLOCK_FORCE_STOP_MODE BIT(10)
+
+#define DSI_MCTL_PLL_CTL 0x0000000C
+#define DSI_MCTL_LANE_STS 0x00000010
+
+#define DSI_MCTL_DPHY_TIMEOUT 0x00000014
+#define DSI_MCTL_DPHY_TIMEOUT_CLK_DIV_SHIFT 0
+#define DSI_MCTL_DPHY_TIMEOUT_CLK_DIV_MASK 0x0000000F
+#define DSI_MCTL_DPHY_TIMEOUT_HSTX_TO_VAL_SHIFT 4
+#define DSI_MCTL_DPHY_TIMEOUT_HSTX_TO_VAL_MASK 0x0003FFF0
+#define DSI_MCTL_DPHY_TIMEOUT_LPRX_TO_VAL_SHIFT 18
+#define DSI_MCTL_DPHY_TIMEOUT_LPRX_TO_VAL_MASK 0xFFFC0000
+
+#define DSI_MCTL_ULPOUT_TIME 0x00000018
+#define DSI_MCTL_ULPOUT_TIME_CKLANE_ULPOUT_TIME_SHIFT 0
+#define DSI_MCTL_ULPOUT_TIME_CKLANE_ULPOUT_TIME_MASK 0x000001FF
+#define DSI_MCTL_ULPOUT_TIME_DATA_ULPOUT_TIME_SHIFT 9
+#define DSI_MCTL_ULPOUT_TIME_DATA_ULPOUT_TIME_MASK 0x0003FE00
+
+#define DSI_MCTL_DPHY_STATIC 0x0000001C
+#define DSI_MCTL_DPHY_STATIC_SWAP_PINS_CLK BIT(0)
+#define DSI_MCTL_DPHY_STATIC_HS_INVERT_CLK BIT(1)
+#define DSI_MCTL_DPHY_STATIC_SWAP_PINS_DAT1 BIT(2)
+#define DSI_MCTL_DPHY_STATIC_HS_INVERT_DAT1 BIT(3)
+#define DSI_MCTL_DPHY_STATIC_SWAP_PINS_DAT2 BIT(4)
+#define DSI_MCTL_DPHY_STATIC_HS_INVERT_DAT2 BIT(5)
+#define DSI_MCTL_DPHY_STATIC_UI_X4_SHIFT 6
+#define DSI_MCTL_DPHY_STATIC_UI_X4_MASK 0x00000FC0
+
+#define DSI_MCTL_MAIN_EN 0x00000020
+#define DSI_MCTL_MAIN_EN_PLL_START BIT(0)
+#define DSI_MCTL_MAIN_EN_CKLANE_EN BIT(3)
+#define DSI_MCTL_MAIN_EN_DAT1_EN BIT(4)
+#define DSI_MCTL_MAIN_EN_DAT2_EN BIT(5)
+#define DSI_MCTL_MAIN_EN_CLKLANE_ULPM_REQ BIT(6)
+#define DSI_MCTL_MAIN_EN_DAT1_ULPM_REQ BIT(7)
+#define DSI_MCTL_MAIN_EN_DAT2_ULPM_REQ BIT(8)
+#define DSI_MCTL_MAIN_EN_IF1_EN BIT(9)
+#define DSI_MCTL_MAIN_EN_IF2_EN BIT(10)
+
+#define DSI_MCTL_MAIN_STS 0x00000024
+#define DSI_MCTL_MAIN_STS_PLL_LOCK BIT(0)
+#define DSI_MCTL_MAIN_STS_CLKLANE_READY BIT(1)
+#define DSI_MCTL_MAIN_STS_DAT1_READY BIT(2)
+#define DSI_MCTL_MAIN_STS_DAT2_READY BIT(3)
+#define DSI_MCTL_MAIN_STS_HSTX_TO_ERR BIT(4)
+#define DSI_MCTL_MAIN_STS_LPRX_TO_ERR BIT(5)
+#define DSI_MCTL_MAIN_STS_CRS_UNTERM_PCK BIT(6)
+#define DSI_MCTL_MAIN_STS_VRS_UNTERM_PCK BIT(7)
+
+#define DSI_MCTL_DPHY_ERR 0x00000028
+#define DSI_INT_VID_RDDATA 0x00000030
+#define DSI_INT_VID_GNT 0x00000034
+#define DSI_INT_CMD_RDDATA 0x00000038
+#define DSI_INT_CMD_GNT 0x0000003C
+#define DSI_INT_INTERRUPT_CTL 0x00000040
+
+#define DSI_CMD_MODE_CTL 0x00000050
+#define DSI_CMD_MODE_CTL_IF1_ID_SHIFT 0
+#define DSI_CMD_MODE_CTL_IF1_ID_MASK 0x00000003
+#define DSI_CMD_MODE_CTL_IF2_ID_SHIFT 2
+#define DSI_CMD_MODE_CTL_IF2_ID_MASK 0x0000000C
+#define DSI_CMD_MODE_CTL_IF1_LP_EN BIT(4)
+#define DSI_CMD_MODE_CTL_IF2_LP_EN BIT(5)
+#define DSI_CMD_MODE_CTL_ARB_MODE BIT(6)
+#define DSI_CMD_MODE_CTL_ARB_PRI BIT(7)
+#define DSI_CMD_MODE_CTL_FIL_VALUE_SHIFT 8
+#define DSI_CMD_MODE_CTL_FIL_VALUE_MASK 0x0000FF00
+#define DSI_CMD_MODE_CTL_TE_TIMEOUT_SHIFT 16
+#define DSI_CMD_MODE_CTL_TE_TIMEOUT_MASK 0x03FF0000
+
+#define DSI_CMD_MODE_STS 0x00000054
+#define DSI_CMD_MODE_STS_ERR_NO_TE BIT(0)
+#define DSI_CMD_MODE_STS_ERR_TE_MISS BIT(1)
+#define DSI_CMD_MODE_STS_ERR_SDI1_UNDERRUN BIT(2)
+#define DSI_CMD_MODE_STS_ERR_SDI2_UNDERRUN BIT(3)
+#define DSI_CMD_MODE_STS_ERR_UNWANTED_RD BIT(4)
+#define DSI_CMD_MODE_STS_CSM_RUNNING BIT(5)
+
+#define DSI_DIRECT_CMD_SEND 0x00000060
+
+#define DSI_DIRECT_CMD_MAIN_SETTINGS 0x00000064
+#define DSI_DIRECT_CMD_MAIN_SETTINGS_CMD_NAT_SHIFT 0
+#define DSI_DIRECT_CMD_MAIN_SETTINGS_CMD_NAT_MASK 0x00000007
+#define DSI_DIRECT_CMD_MAIN_SETTINGS_CMD_NAT_WRITE 0
+#define DSI_DIRECT_CMD_MAIN_SETTINGS_CMD_NAT_READ 1
+#define DSI_DIRECT_CMD_MAIN_SETTINGS_CMD_NAT_TE_REQ 4
+#define DSI_DIRECT_CMD_MAIN_SETTINGS_CMD_NAT_TRIG_REQ 5
+#define DSI_DIRECT_CMD_MAIN_SETTINGS_CMD_NAT_BTA_REQ 6
+#define DSI_DIRECT_CMD_MAIN_SETTINGS_CMD_LONGNOTSHORT BIT(3)
+#define DSI_DIRECT_CMD_MAIN_SETTINGS_CMD_HEAD_SHIFT 8
+#define DSI_DIRECT_CMD_MAIN_SETTINGS_CMD_HEAD_MASK 0x00003F00
+#define DSI_DIRECT_CMD_MAIN_SETTINGS_CMD_ID_SHIFT 14
+#define DSI_DIRECT_CMD_MAIN_SETTINGS_CMD_SIZE_SHIFT 16
+#define DSI_DIRECT_CMD_MAIN_SETTINGS_CMD_LP_EN BIT(21)
+#define DSI_DIRECT_CMD_MAIN_SETTINGS_TRIGGER_VAL_SHIFT 24
+#define DSI_DIRECT_CMD_MAIN_SETTINGS_TRIGGER_VAL_MASK 0x0F000000
+
+#define DSI_DIRECT_CMD_STS 0x00000068
+#define DSI_DIRECT_CMD_STS_CMD_TRANSMISSION BIT(0)
+#define DSI_DIRECT_CMD_STS_WRITE_COMPLETED BIT(1)
+#define DSI_DIRECT_CMD_STS_TRIGGER_COMPLETED BIT(2)
+#define DSI_DIRECT_CMD_STS_READ_COMPLETED BIT(3)
+#define DSI_DIRECT_CMD_STS_ACKNOWLEDGE_RECEIVED_SHIFT BIT(4)
+#define DSI_DIRECT_CMD_STS_ACKNOWLEDGE_WITH_ERR_RECEIVED BIT(5)
+#define DSI_DIRECT_CMD_STS_TRIGGER_RECEIVED BIT(6)
+#define DSI_DIRECT_CMD_STS_TE_RECEIVED BIT(7)
+#define DSI_DIRECT_CMD_STS_BTA_COMPLETED BIT(8)
+#define DSI_DIRECT_CMD_STS_BTA_FINISHED BIT(9)
+#define DSI_DIRECT_CMD_STS_READ_COMPLETED_WITH_ERR BIT(10)
+#define DSI_DIRECT_CMD_STS_TRIGGER_VAL_MASK 0x00007800
+#define DSI_DIRECT_CMD_STS_TRIGGER_VAL_SHIFT 11
+#define DSI_DIRECT_CMD_STS_ACK_VAL_SHIFT 16
+#define DSI_DIRECT_CMD_STS_ACK_VAL_MASK 0xFFFF0000
+
+#define DSI_DIRECT_CMD_RD_INIT 0x0000006C
+#define DSI_DIRECT_CMD_RD_INIT_RESET_SHIFT 0
+#define DSI_DIRECT_CMD_RD_INIT_RESET_MASK 0xFFFFFFFF
+
+#define DSI_DIRECT_CMD_WRDAT0 0x00000070
+#define DSI_DIRECT_CMD_WRDAT1 0x00000074
+#define DSI_DIRECT_CMD_WRDAT2 0x00000078
+#define DSI_DIRECT_CMD_WRDAT3 0x0000007C
+
+#define DSI_DIRECT_CMD_RDDAT 0x00000080
+
+#define DSI_DIRECT_CMD_RD_PROPERTY 0x00000084
+#define DSI_DIRECT_CMD_RD_PROPERTY_RD_SIZE_SHIFT 0
+#define DSI_DIRECT_CMD_RD_PROPERTY_RD_SIZE_MASK 0x0000FFFF
+#define DSI_DIRECT_CMD_RD_PROPERTY_RD_ID_SHIFT 16
+#define DSI_DIRECT_CMD_RD_PROPERTY_RD_ID_MASK 0x00030000
+#define DSI_DIRECT_CMD_RD_PROPERTY_RD_DCSNOTGENERIC_SHIFT 18
+#define DSI_DIRECT_CMD_RD_PROPERTY_RD_DCSNOTGENERIC_MASK 0x00040000
+
+#define DSI_DIRECT_CMD_RD_STS 0x00000088
+
+#define DSI_VID_MAIN_CTL 0x00000090
+#define DSI_VID_MAIN_CTL_START_MODE_SHIFT 0
+#define DSI_VID_MAIN_CTL_START_MODE_MASK 0x00000003
+#define DSI_VID_MAIN_CTL_STOP_MODE_SHIFT 2
+#define DSI_VID_MAIN_CTL_STOP_MODE_MASK 0x0000000C
+#define DSI_VID_MAIN_CTL_VID_ID_SHIFT 4
+#define DSI_VID_MAIN_CTL_VID_ID_MASK 0x00000030
+#define DSI_VID_MAIN_CTL_HEADER_SHIFT 6
+#define DSI_VID_MAIN_CTL_HEADER_MASK 0x00000FC0
+#define DSI_VID_MAIN_CTL_VID_PIXEL_MODE_16BITS 0
+#define DSI_VID_MAIN_CTL_VID_PIXEL_MODE_18BITS BIT(12)
+#define DSI_VID_MAIN_CTL_VID_PIXEL_MODE_18BITS_LOOSE BIT(13)
+#define DSI_VID_MAIN_CTL_VID_PIXEL_MODE_24BITS (BIT(12) | BIT(13))
+#define DSI_VID_MAIN_CTL_BURST_MODE BIT(14)
+#define DSI_VID_MAIN_CTL_SYNC_PULSE_ACTIVE BIT(15)
+#define DSI_VID_MAIN_CTL_SYNC_PULSE_HORIZONTAL BIT(16)
+#define DSI_VID_MAIN_CTL_REG_BLKLINE_MODE_NULL 0
+#define DSI_VID_MAIN_CTL_REG_BLKLINE_MODE_BLANKING BIT(17)
+#define DSI_VID_MAIN_CTL_REG_BLKLINE_MODE_LP_0 BIT(18)
+#define DSI_VID_MAIN_CTL_REG_BLKLINE_MODE_LP_1 (BIT(17) | BIT(18))
+#define DSI_VID_MAIN_CTL_REG_BLKEOL_MODE_NULL 0
+#define DSI_VID_MAIN_CTL_REG_BLKEOL_MODE_BLANKING BIT(19)
+#define DSI_VID_MAIN_CTL_REG_BLKEOL_MODE_LP_0 BIT(20)
+#define DSI_VID_MAIN_CTL_REG_BLKEOL_MODE_LP_1 (BIT(19) | BIT(20))
+#define DSI_VID_MAIN_CTL_RECOVERY_MODE_SHIFT 21
+#define DSI_VID_MAIN_CTL_RECOVERY_MODE_MASK 0x00600000
+
+#define DSI_VID_VSIZE 0x00000094
+#define DSI_VID_VSIZE_VSA_LENGTH_SHIFT 0
+#define DSI_VID_VSIZE_VSA_LENGTH_MASK 0x0000003F
+#define DSI_VID_VSIZE_VBP_LENGTH_SHIFT 6
+#define DSI_VID_VSIZE_VBP_LENGTH_MASK 0x00000FC0
+#define DSI_VID_VSIZE_VFP_LENGTH_SHIFT 12
+#define DSI_VID_VSIZE_VFP_LENGTH_MASK 0x000FF000
+#define DSI_VID_VSIZE_VACT_LENGTH_SHIFT 20
+#define DSI_VID_VSIZE_VACT_LENGTH_MASK 0x7FF00000
+
+#define DSI_VID_HSIZE1 0x00000098
+#define DSI_VID_HSIZE1_HSA_LENGTH_SHIFT 0
+#define DSI_VID_HSIZE1_HSA_LENGTH_MASK 0x000003FF
+#define DSI_VID_HSIZE1_HBP_LENGTH_SHIFT 10
+#define DSI_VID_HSIZE1_HBP_LENGTH_MASK 0x000FFC00
+#define DSI_VID_HSIZE1_HFP_LENGTH_SHIFT 20
+#define DSI_VID_HSIZE1_HFP_LENGTH_MASK 0x7FF00000
+
+#define DSI_VID_HSIZE2 0x0000009C
+#define DSI_VID_HSIZE2_RGB_SIZE_SHIFT 0
+#define DSI_VID_HSIZE2_RGB_SIZE_MASK 0x00001FFF
+
+#define DSI_VID_BLKSIZE1 0x000000A0
+#define DSI_VID_BLKSIZE1_BLKLINE_EVENT_PCK_SHIFT 0
+#define DSI_VID_BLKSIZE1_BLKLINE_EVENT_PCK_MASK 0x00001FFF
+#define DSI_VID_BLKSIZE1_BLKEOL_PCK_SHIFT 13
+#define DSI_VID_BLKSIZE1_BLKEOL_PCK_MASK 0x03FFE000
+
+#define DSI_VID_BLKSIZE2 0x000000A4
+#define DSI_VID_BLKSIZE2_BLKLINE_PULSE_PCK_SHIFT 0
+#define DSI_VID_BLKSIZE2_BLKLINE_PULSE_PCK_MASK 0x00001FFF
+
+#define DSI_VID_PCK_TIME 0x000000A8
+#define DSI_VID_PCK_TIME_BLKEOL_DURATION_SHIFT 0
+#define DSI_VID_PCK_TIME_BLKEOL_DURATION_MASK 0x00000FFF
+
+#define DSI_VID_DPHY_TIME 0x000000AC
+#define DSI_VID_DPHY_TIME_REG_LINE_DURATION_SHIFT 0
+#define DSI_VID_DPHY_TIME_REG_LINE_DURATION_MASK 0x00001FFF
+#define DSI_VID_DPHY_TIME_REG_WAKEUP_TIME_SHIFT 13
+#define DSI_VID_DPHY_TIME_REG_WAKEUP_TIME_MASK 0x00FFE000
+
+#define DSI_VID_MODE_STS 0x000000BC
+#define DSI_VID_MODE_STS_VSG_RUNNING BIT(0)
+#define DSI_VID_MODE_STS_ERR_MISSING_DATA BIT(1)
+#define DSI_VID_MODE_STS_ERR_MISSING_HSYNC BIT(2)
+#define DSI_VID_MODE_STS_ERR_MISSING_VSYNC BIT(3)
+#define DSI_VID_MODE_STS_REG_ERR_SMALL_LENGTH BIT(4)
+#define DSI_VID_MODE_STS_REG_ERR_SMALL_HEIGHT BIT(5)
+#define DSI_VID_MODE_STS_ERR_BURSTWRITE BIT(6)
+#define DSI_VID_MODE_STS_ERR_LINEWRITE BIT(7)
+#define DSI_VID_MODE_STS_ERR_LONGREAD BIT(8)
+#define DSI_VID_MODE_STS_ERR_VRS_WRONG_LENGTH BIT(9)
+#define DSI_VID_MODE_STS_VSG_RECOVERY BIT(10)
+
+#define DSI_VID_VCA_SETTING1 0x000000C0
+#define DSI_VID_VCA_SETTING1_MAX_BURST_LIMIT_SHIFT 0
+#define DSI_VID_VCA_SETTING1_MAX_BURST_LIMIT_MASK 0x0000FFFF
+#define DSI_VID_VCA_SETTING1_BURST_LP BIT(16)
+
+#define DSI_VID_VCA_SETTING2 0x000000C4
+#define DSI_VID_VCA_SETTING2_EXACT_BURST_LIMIT_SHIFT 0
+#define DSI_VID_VCA_SETTING2_EXACT_BURST_LIMIT_MASK 0x0000FFFF
+#define DSI_VID_VCA_SETTING2_MAX_LINE_LIMIT_SHIFT 16
+#define DSI_VID_VCA_SETTING2_MAX_LINE_LIMIT_MASK 0xFFFF0000
+
+#define DSI_CMD_MODE_STS_CTL 0x000000F4
+#define DSI_CMD_MODE_STS_CTL_ERR_NO_TE_EN BIT(0)
+#define DSI_CMD_MODE_STS_CTL_ERR_TE_MISS_EN BIT(1)
+#define DSI_CMD_MODE_STS_CTL_ERR_SDI1_UNDERRUN_EN BIT(2)
+#define DSI_CMD_MODE_STS_CTL_ERR_SDI2_UNDERRUN_EN BIT(3)
+#define DSI_CMD_MODE_STS_CTL_ERR_UNWANTED_RD_EN BIT(4)
+#define DSI_CMD_MODE_STS_CTL_CSM_RUNNING_EN BIT(5)
+#define DSI_CMD_MODE_STS_CTL_ERR_NO_TE_EDGE BIT(16)
+#define DSI_CMD_MODE_STS_CTL_ERR_TE_MISS_EDGE BIT(17)
+#define DSI_CMD_MODE_STS_CTL_ERR_SDI1_UNDERRUN_EDGE BIT(18)
+#define DSI_CMD_MODE_STS_CTL_ERR_SDI2_UNDERRUN_EDGE BIT(19)
+#define DSI_CMD_MODE_STS_CTL_ERR_UNWANTED_RD_EDGE BIT(20)
+#define DSI_CMD_MODE_STS_CTL_CSM_RUNNING_EDGE BIT(21)
+
+#define DSI_DIRECT_CMD_STS_CTL 0x000000F8
+#define DSI_DIRECT_CMD_STS_CTL_CMD_TRANSMISSION_EN BIT(0)
+#define DSI_DIRECT_CMD_STS_CTL_WRITE_COMPLETED_EN BIT(1)
+#define DSI_DIRECT_CMD_STS_CTL_TRIGGER_COMPLETED_EN BIT(2)
+#define DSI_DIRECT_CMD_STS_CTL_READ_COMPLETED_EN BIT(3)
+#define DSI_DIRECT_CMD_STS_CTL_ACKNOWLEDGE_RECEIVED_EN BIT(4)
+#define DSI_DIRECT_CMD_STS_CTL_ACKNOWLEDGE_WITH_ERR_EN BIT(5)
+#define DSI_DIRECT_CMD_STS_CTL_TRIGGER_RECEIVED_EN BIT(6)
+#define DSI_DIRECT_CMD_STS_CTL_TE_RECEIVED_EN BIT(7)
+#define DSI_DIRECT_CMD_STS_CTL_BTA_COMPLETED_EN BIT(8)
+#define DSI_DIRECT_CMD_STS_CTL_BTA_FINISHED_EN BIT(9)
+#define DSI_DIRECT_CMD_STS_CTL_READ_COMPLETED_WITH_ERR_EN BIT(10)
+#define DSI_DIRECT_CMD_STS_CTL_CMD_TRANSMISSION_EDGE BIT(16)
+#define DSI_DIRECT_CMD_STS_CTL_WRITE_COMPLETED_EDGE BIT(17)
+#define DSI_DIRECT_CMD_STS_CTL_TRIGGER_COMPLETED_EDGE BIT(18)
+#define DSI_DIRECT_CMD_STS_CTL_READ_COMPLETED_EDGE BIT(19)
+#define DSI_DIRECT_CMD_STS_CTL_ACKNOWLEDGE_RECEIVED_EDGE BIT(20)
+#define DSI_DIRECT_CMD_STS_CTL_ACKNOWLEDGE_WITH_ERR_EDGE BIT(21)
+#define DSI_DIRECT_CMD_STS_CTL_TRIGGER_RECEIVED_EDGE BIT(22)
+#define DSI_DIRECT_CMD_STS_CTL_TE_RECEIVED_EDGE BIT(23)
+#define DSI_DIRECT_CMD_STS_CTL_BTA_COMPLETED_EDGE BIT(24)
+#define DSI_DIRECT_CMD_STS_CTL_BTA_FINISHED_EDGE BIT(25)
+#define DSI_DIRECT_CMD_STS_CTL_READ_COMPLETED_WITH_ERR_EDGE BIT(26)
+
+#define DSI_VID_MODE_STS_CTL 0x00000100
+#define DSI_VID_MODE_STS_CTL_VSG_RUNNING BIT(0)
+#define DSI_VID_MODE_STS_CTL_ERR_MISSING_DATA BIT(1)
+#define DSI_VID_MODE_STS_CTL_ERR_MISSING_HSYNC BIT(2)
+#define DSI_VID_MODE_STS_CTL_ERR_MISSING_VSYNC BIT(3)
+#define DSI_VID_MODE_STS_CTL_REG_ERR_SMALL_LENGTH BIT(4)
+#define DSI_VID_MODE_STS_CTL_REG_ERR_SMALL_HEIGHT BIT(5)
+#define DSI_VID_MODE_STS_CTL_ERR_BURSTWRITE BIT(6)
+#define DSI_VID_MODE_STS_CTL_ERR_LONGWRITE BIT(7)
+#define DSI_VID_MODE_STS_CTL_ERR_LONGREAD BIT(8)
+#define DSI_VID_MODE_STS_CTL_ERR_VRS_WRONG_LENGTH BIT(9)
+#define DSI_VID_MODE_STS_CTL_VSG_RUNNING_EDGE BIT(16)
+#define DSI_VID_MODE_STS_CTL_ERR_MISSING_DATA_EDGE BIT(17)
+#define DSI_VID_MODE_STS_CTL_ERR_MISSING_HSYNC_EDGE BIT(18)
+#define DSI_VID_MODE_STS_CTL_ERR_MISSING_VSYNC_EDGE BIT(19)
+#define DSI_VID_MODE_STS_CTL_REG_ERR_SMALL_LENGTH_EDGE BIT(20)
+#define DSI_VID_MODE_STS_CTL_REG_ERR_SMALL_HEIGHT_EDGE BIT(21)
+#define DSI_VID_MODE_STS_CTL_ERR_BURSTWRITE_EDGE BIT(22)
+#define DSI_VID_MODE_STS_CTL_ERR_LONGWRITE_EDGE BIT(23)
+#define DSI_VID_MODE_STS_CTL_ERR_LONGREAD_EDGE BIT(24)
+#define DSI_VID_MODE_STS_CTL_ERR_VRS_WRONG_LENGTH_EDGE BIT(25)
+#define DSI_VID_MODE_STS_CTL_VSG_RECOVERY_EDGE BIT(26)
+
+#define DSI_TG_STS_CTL 0x00000104
+#define DSI_MCTL_DHPY_ERR_CTL 0x00000108
+#define DSI_MCTL_MAIN_STS_CLR 0x00000110
+
+#define DSI_CMD_MODE_STS_CLR 0x00000114
+#define DSI_CMD_MODE_STS_CLR_ERR_NO_TE_CLR BIT(0)
+#define DSI_CMD_MODE_STS_CLR_ERR_TE_MISS_CLR BIT(1)
+#define DSI_CMD_MODE_STS_CLR_ERR_SDI1_UNDERRUN_CLR BIT(2)
+#define DSI_CMD_MODE_STS_CLR_ERR_SDI2_UNDERRUN_CLR BIT(3)
+#define DSI_CMD_MODE_STS_CLR_ERR_UNWANTED_RD_CLR BIT(4)
+#define DSI_CMD_MODE_STS_CLR_CSM_RUNNING_CLR BIT(5)
+
+#define DSI_DIRECT_CMD_STS_CLR 0x00000118
+#define DSI_DIRECT_CMD_STS_CLR_CMD_TRANSMISSION_CLR BIT(0)
+#define DSI_DIRECT_CMD_STS_CLR_WRITE_COMPLETED_CLR BIT(1)
+#define DSI_DIRECT_CMD_STS_CLR_TRIGGER_COMPLETED_CLR BIT(2)
+#define DSI_DIRECT_CMD_STS_CLR_READ_COMPLETED_CLR BIT(3)
+#define DSI_DIRECT_CMD_STS_CLR_ACKNOWLEDGE_RECEIVED_CLR BIT(4)
+#define DSI_DIRECT_CMD_STS_CLR_ACKNOWLEDGE_WITH_ERR_RECEIVED_CLR BIT(5)
+#define DSI_DIRECT_CMD_STS_CLR_TRIGGER_RECEIVED_CLR BIT(6)
+#define DSI_DIRECT_CMD_STS_CLR_TE_RECEIVED_CLR BIT(7)
+#define DSI_DIRECT_CMD_STS_CLR_BTA_COMPLETED_CLR BIT(8)
+#define DSI_DIRECT_CMD_STS_CLR_BTA_FINISHED_CLR BIT(9)
+#define DSI_DIRECT_CMD_STS_CLR_READ_COMPLETED_WITH_ERR_CLR BIT(10)
+
+#define DSI_DIRECT_CMD_RD_STS_CLR 0x0000011C
+#define DSI_VID_MODE_STS_CLR 0x00000120
+#define DSI_TG_STS_CLR 0x00000124
+#define DSI_MCTL_DPHY_ERR_CLR 0x00000128
+#define DSI_MCTL_MAIN_STS_FLAG 0x00000130
+#define DSI_CMD_MODE_STS_FLAG 0x00000134
+#define DSI_DIRECT_CMD_STS_FLAG 0x00000138
+#define DSI_DIRECT_CMD_RD_STS_FLAG 0x0000013C
+#define DSI_VID_MODE_STS_FLAG 0x00000140
+#define DSI_TG_STS_FLAG 0x00000144
+
+#define DSI_DPHY_LANES_TRIM 0x00000150
+#define DSI_DPHY_LANES_TRIM_DPHY_SKEW_DAT1_SHIFT 0
+#define DSI_DPHY_LANES_TRIM_DPHY_SKEW_DAT1_MASK 0x00000003
+#define DSI_DPHY_LANES_TRIM_DPHY_CD_OFF_DAT1 BIT(2)
+#define DSI_DPHY_LANES_TRIM_DPHY_HSTX_SLEWRATE_UP_DAT1 BIT(3)
+#define DSI_DPHY_LANES_TRIM_DPHY_HSTX_SLEWRATE_DOWN_DAT1 BIT(4)
+#define DSI_DPHY_LANES_TRIM_DPHY_TEST_RESERVED_1_DAT1 BIT(5)
+#define DSI_DPHY_LANES_TRIM_DPHY_SKEW_CLK_SHIFT 6
+#define DSI_DPHY_LANES_TRIM_DPHY_SKEW_CLK_MASK 0x000000C0
+#define DSI_DPHY_LANES_TRIM_DPHY_LP_RX_VIL_CLK_SHIFT 8
+#define DSI_DPHY_LANES_TRIM_DPHY_LP_RX_VIL_CLK_MASK 0x00000300
+#define DSI_DPHY_LANES_TRIM_DPHY_LP_TX_SLEWRATE_CLK_SHIFT 10
+#define DSI_DPHY_LANES_TRIM_DPHY_LP_TX_SLEWRATE_CLK_MASK 0x00000C00
+#define DSI_DPHY_LANES_TRIM_DPHY_SPECS_90_81B_0_81 0
+#define DSI_DPHY_LANES_TRIM_DPHY_SPECS_90_81B_0_90 BIT(12)
+#define DSI_DPHY_LANES_TRIM_DPHY_HSTX_SLEWRATE_UP_CLK BIT(13)
+#define DSI_DPHY_LANES_TRIM_DPHY_HSTX_SLEWRATE_DOWN_CLK BIT(14)
+#define DSI_DPHY_LANES_TRIM_DPHY_TEST_RESERVED_1_CLK BIT(15)
+#define DSI_DPHY_LANES_TRIM_DPHY_SKEW_DAT2 BIT(16)
+#define DSI_DPHY_LANES_TRIM_DPHY_HSTX_SLEWRATE_UP_DAT2 BIT(18)
+#define DSI_DPHY_LANES_TRIM_DPHY_HSTX_SLEWRATE_DOWN_DAT2 BIT(19)
+#define DSI_DPHY_LANES_TRIM_DPHY_TEST_RESERVED_1_DAT2 BIT(20)
+
+#define DSI_ID_REG	0x00000FF0
+
+#endif /* __DRM_MCDE_DSI_REGS */