Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 318 insertions, 0 deletions

diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c
new file mode 100644
index 000000000..cde800398
--- /dev/null
+++ b/drivers/i2c/busses/i2c-sis96x.c
@@ -0,0 +1,318 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+    Copyright (c) 2003 Mark M. Hoffman <mhoffman@lightlink.com>
+
+*/
+
+/*
+    This module must be considered BETA unless and until
+    the chipset manufacturer releases a datasheet.
+    The register definitions are based on the SiS630.
+
+    This module relies on quirk_sis_96x_smbus (drivers/pci/quirks.c)
+    for just about every machine for which users have reported.
+    If this module isn't detecting your 96x south bridge, have a 
+    look there.
+
+    We assume there can only be one SiS96x with one SMBus interface.
+*/
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/stddef.h>
+#include <linux/ioport.h>
+#include <linux/i2c.h>
+#include <linux/acpi.h>
+#include <linux/io.h>
+
+/* base address register in PCI config space */
+#define SIS96x_BAR 0x04
+
+/* SiS96x SMBus registers */
+#define SMB_STS      0x00
+#define SMB_EN       0x01
+#define SMB_CNT      0x02
+#define SMB_HOST_CNT 0x03
+#define SMB_ADDR     0x04
+#define SMB_CMD      0x05
+#define SMB_PCOUNT   0x06
+#define SMB_COUNT    0x07
+#define SMB_BYTE     0x08
+#define SMB_DEV_ADDR 0x10
+#define SMB_DB0      0x11
+#define SMB_DB1      0x12
+#define SMB_SAA      0x13
+
+/* register count for request_region */
+#define SMB_IOSIZE 0x20
+
+/* Other settings */
+#define MAX_TIMEOUT 500
+
+/* SiS96x SMBus constants */
+#define SIS96x_QUICK      0x00
+#define SIS96x_BYTE       0x01
+#define SIS96x_BYTE_DATA  0x02
+#define SIS96x_WORD_DATA  0x03
+#define SIS96x_PROC_CALL  0x04
+#define SIS96x_BLOCK_DATA 0x05
+
+static struct pci_driver sis96x_driver;
+static struct i2c_adapter sis96x_adapter;
+static u16 sis96x_smbus_base;
+
+static inline u8 sis96x_read(u8 reg)
+{
+	return inb(sis96x_smbus_base + reg) ;
+}
+
+static inline void sis96x_write(u8 reg, u8 data)
+{
+	outb(data, sis96x_smbus_base + reg) ;
+}
+
+/* Execute a SMBus transaction.
+   int size is from SIS96x_QUICK to SIS96x_BLOCK_DATA
+ */
+static int sis96x_transaction(int size)
+{
+	int temp;
+	int result = 0;
+	int timeout = 0;
+
+	dev_dbg(&sis96x_adapter.dev, "SMBus transaction %d\n", size);
+
+	/* Make sure the SMBus host is ready to start transmitting */
+	if (((temp = sis96x_read(SMB_CNT)) & 0x03) != 0x00) {
+
+		dev_dbg(&sis96x_adapter.dev, "SMBus busy (0x%02x). "
+			"Resetting...\n", temp);
+
+		/* kill the transaction */
+		sis96x_write(SMB_HOST_CNT, 0x20);
+
+		/* check it again */
+		if (((temp = sis96x_read(SMB_CNT)) & 0x03) != 0x00) {
+			dev_dbg(&sis96x_adapter.dev, "Failed (0x%02x)\n", temp);
+			return -EBUSY;
+		} else {
+			dev_dbg(&sis96x_adapter.dev, "Successful\n");
+		}
+	}
+
+	/* Turn off timeout interrupts, set fast host clock */
+	sis96x_write(SMB_CNT, 0x20);
+
+	/* clear all (sticky) status flags */
+	temp = sis96x_read(SMB_STS);
+	sis96x_write(SMB_STS, temp & 0x1e);
+
+	/* start the transaction by setting bit 4 and size bits */
+	sis96x_write(SMB_HOST_CNT, 0x10 | (size & 0x07));
+
+	/* We will always wait for a fraction of a second! */
+	do {
+		msleep(1);
+		temp = sis96x_read(SMB_STS);
+	} while (!(temp & 0x0e) && (timeout++ < MAX_TIMEOUT));
+
+	/* If the SMBus is still busy, we give up */
+	if (timeout > MAX_TIMEOUT) {
+		dev_dbg(&sis96x_adapter.dev, "SMBus Timeout! (0x%02x)\n", temp);
+		result = -ETIMEDOUT;
+	}
+
+	/* device error - probably missing ACK */
+	if (temp & 0x02) {
+		dev_dbg(&sis96x_adapter.dev, "Failed bus transaction!\n");
+		result = -ENXIO;
+	}
+
+	/* bus collision */
+	if (temp & 0x04) {
+		dev_dbg(&sis96x_adapter.dev, "Bus collision!\n");
+		result = -EIO;
+	}
+
+	/* Finish up by resetting the bus */
+	sis96x_write(SMB_STS, temp);
+	if ((temp = sis96x_read(SMB_STS))) {
+		dev_dbg(&sis96x_adapter.dev, "Failed reset at "
+			"end of transaction! (0x%02x)\n", temp);
+	}
+
+	return result;
+}
+
+/* Return negative errno on error. */
+static s32 sis96x_access(struct i2c_adapter * adap, u16 addr,
+			 unsigned short flags, char read_write,
+			 u8 command, int size, union i2c_smbus_data * data)
+{
+	int status;
+
+	switch (size) {
+	case I2C_SMBUS_QUICK:
+		sis96x_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01));
+		size = SIS96x_QUICK;
+		break;
+
+	case I2C_SMBUS_BYTE:
+		sis96x_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01));
+		if (read_write == I2C_SMBUS_WRITE)
+			sis96x_write(SMB_CMD, command);
+		size = SIS96x_BYTE;
+		break;
+
+	case I2C_SMBUS_BYTE_DATA:
+		sis96x_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01));
+		sis96x_write(SMB_CMD, command);
+		if (read_write == I2C_SMBUS_WRITE)
+			sis96x_write(SMB_BYTE, data->byte);
+		size = SIS96x_BYTE_DATA;
+		break;
+
+	case I2C_SMBUS_PROC_CALL:
+	case I2C_SMBUS_WORD_DATA:
+		sis96x_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01));
+		sis96x_write(SMB_CMD, command);
+		if (read_write == I2C_SMBUS_WRITE) {
+			sis96x_write(SMB_BYTE, data->word & 0xff);
+			sis96x_write(SMB_BYTE + 1, (data->word & 0xff00) >> 8);
+		}
+		size = (size == I2C_SMBUS_PROC_CALL ? 
+			SIS96x_PROC_CALL : SIS96x_WORD_DATA);
+		break;
+
+	default:
+		dev_warn(&adap->dev, "Unsupported transaction %d\n", size);
+		return -EOPNOTSUPP;
+	}
+
+	status = sis96x_transaction(size);
+	if (status)
+		return status;
+
+	if ((size != SIS96x_PROC_CALL) &&
+		((read_write == I2C_SMBUS_WRITE) || (size == SIS96x_QUICK)))
+		return 0;
+
+	switch (size) {
+	case SIS96x_BYTE:
+	case SIS96x_BYTE_DATA:
+		data->byte = sis96x_read(SMB_BYTE);
+		break;
+
+	case SIS96x_WORD_DATA:
+	case SIS96x_PROC_CALL:
+		data->word = sis96x_read(SMB_BYTE) +
+				(sis96x_read(SMB_BYTE + 1) << 8);
+		break;
+	}
+	return 0;
+}
+
+static u32 sis96x_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+	    I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+	    I2C_FUNC_SMBUS_PROC_CALL;
+}
+
+static const struct i2c_algorithm smbus_algorithm = {
+	.smbus_xfer	= sis96x_access,
+	.functionality	= sis96x_func,
+};
+
+static struct i2c_adapter sis96x_adapter = {
+	.owner		= THIS_MODULE,
+	.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
+	.algo		= &smbus_algorithm,
+};
+
+static const struct pci_device_id sis96x_ids[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_SMBUS) },
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE (pci, sis96x_ids);
+
+static int sis96x_probe(struct pci_dev *dev,
+				const struct pci_device_id *id)
+{
+	u16 ww = 0;
+	int retval;
+
+	if (sis96x_smbus_base) {
+		dev_err(&dev->dev, "Only one device supported.\n");
+		return -EBUSY;
+	}
+
+	pci_read_config_word(dev, PCI_CLASS_DEVICE, &ww);
+	if (PCI_CLASS_SERIAL_SMBUS != ww) {
+		dev_err(&dev->dev, "Unsupported device class 0x%04x!\n", ww);
+		return -ENODEV;
+	}
+
+	sis96x_smbus_base = pci_resource_start(dev, SIS96x_BAR);
+	if (!sis96x_smbus_base) {
+		dev_err(&dev->dev, "SiS96x SMBus base address "
+			"not initialized!\n");
+		return -EINVAL;
+	}
+	dev_info(&dev->dev, "SiS96x SMBus base address: 0x%04x\n",
+			sis96x_smbus_base);
+
+	retval = acpi_check_resource_conflict(&dev->resource[SIS96x_BAR]);
+	if (retval)
+		return -ENODEV;
+
+	/* Everything is happy, let's grab the memory and set things up. */
+	if (!request_region(sis96x_smbus_base, SMB_IOSIZE,
+			    sis96x_driver.name)) {
+		dev_err(&dev->dev, "SMBus registers 0x%04x-0x%04x "
+			"already in use!\n", sis96x_smbus_base,
+			sis96x_smbus_base + SMB_IOSIZE - 1);
+
+		sis96x_smbus_base = 0;
+		return -EINVAL;
+	}
+
+	/* set up the sysfs linkage to our parent device */
+	sis96x_adapter.dev.parent = &dev->dev;
+
+	snprintf(sis96x_adapter.name, sizeof(sis96x_adapter.name),
+		"SiS96x SMBus adapter at 0x%04x", sis96x_smbus_base);
+
+	if ((retval = i2c_add_adapter(&sis96x_adapter))) {
+		dev_err(&dev->dev, "Couldn't register adapter!\n");
+		release_region(sis96x_smbus_base, SMB_IOSIZE);
+		sis96x_smbus_base = 0;
+	}
+
+	return retval;
+}
+
+static void sis96x_remove(struct pci_dev *dev)
+{
+	if (sis96x_smbus_base) {
+		i2c_del_adapter(&sis96x_adapter);
+		release_region(sis96x_smbus_base, SMB_IOSIZE);
+		sis96x_smbus_base = 0;
+	}
+}
+
+static struct pci_driver sis96x_driver = {
+	.name		= "sis96x_smbus",
+	.id_table	= sis96x_ids,
+	.probe		= sis96x_probe,
+	.remove		= sis96x_remove,
+};
+
+module_pci_driver(sis96x_driver);
+
+MODULE_AUTHOR("Mark M. Hoffman <mhoffman@lightlink.com>");
+MODULE_DESCRIPTION("SiS96x SMBus driver");
+MODULE_LICENSE("GPL");