Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

5 files changed, 2399 insertions, 0 deletions

diff --git a/drivers/iio/frequency/Kconfig b/drivers/iio/frequency/Kconfig
new file mode 100644
index 000000000..240b81502
--- /dev/null
+++ b/drivers/iio/frequency/Kconfig
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Frequency
+#	Direct Digital Synthesis drivers (DDS)
+#	Clock Distribution device drivers
+#	Phase-Locked Loop (PLL) frequency synthesizers
+#
+# When adding new entries keep the list in alphabetical order
+
+menu "Frequency Synthesizers DDS/PLL"
+
+menu "Clock Generator/Distribution"
+
+config AD9523
+	tristate "Analog Devices AD9523 Low Jitter Clock Generator"
+	depends on SPI
+	help
+	  Say yes here to build support for Analog Devices AD9523 Low Jitter
+	  Clock Generator. The driver provides direct access via sysfs.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ad9523.
+
+endmenu
+
+#
+# Phase-Locked Loop (PLL) frequency synthesizers
+#
+
+menu "Phase-Locked Loop (PLL) frequency synthesizers"
+
+config ADF4350
+	tristate "Analog Devices ADF4350/ADF4351 Wideband Synthesizers"
+	depends on SPI
+	help
+	  Say yes here to build support for Analog Devices  ADF4350/ADF4351
+	  Wideband Synthesizers. The driver provides direct access via sysfs.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called adf4350.
+
+config ADF4371
+	tristate "Analog Devices ADF4371/ADF4372 Wideband Synthesizers"
+	depends on SPI
+	select REGMAP_SPI
+	help
+	  Say yes here to build support for Analog Devices ADF4371 and ADF4372
+	  Wideband Synthesizers. The driver provides direct access via sysfs.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called adf4371.
+endmenu
+endmenu
diff --git a/drivers/iio/frequency/Makefile b/drivers/iio/frequency/Makefile
new file mode 100644
index 000000000..518b1e50c
--- /dev/null
+++ b/drivers/iio/frequency/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Makefile iio/frequency
+#
+
+# When adding new entries keep the list in alphabetical order
+obj-$(CONFIG_AD9523) += ad9523.o
+obj-$(CONFIG_ADF4350) += adf4350.o
+obj-$(CONFIG_ADF4371) += adf4371.o
diff --git a/drivers/iio/frequency/ad9523.c b/drivers/iio/frequency/ad9523.c
new file mode 100644
index 000000000..bdb0bc3b1
--- /dev/null
+++ b/drivers/iio/frequency/ad9523.c
@@ -0,0 +1,1066 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * AD9523 SPI Low Jitter Clock Generator
+ *
+ * Copyright 2012 Analog Devices Inc.
+ */
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/spi/spi.h>
+#include <linux/regulator/consumer.h>
+#include <linux/gpio/consumer.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/frequency/ad9523.h>
+
+#define AD9523_READ	(1 << 15)
+#define AD9523_WRITE	(0 << 15)
+#define AD9523_CNT(x)	(((x) - 1) << 13)
+#define AD9523_ADDR(x)	((x) & 0xFFF)
+
+#define AD9523_R1B	(1 << 16)
+#define AD9523_R2B	(2 << 16)
+#define AD9523_R3B	(3 << 16)
+#define AD9523_TRANSF_LEN(x)			((x) >> 16)
+
+#define AD9523_SERIAL_PORT_CONFIG		(AD9523_R1B | 0x0)
+#define AD9523_VERSION_REGISTER			(AD9523_R1B | 0x2)
+#define AD9523_PART_REGISTER			(AD9523_R1B | 0x3)
+#define AD9523_READBACK_CTRL			(AD9523_R1B | 0x4)
+
+#define AD9523_EEPROM_CUSTOMER_VERSION_ID	(AD9523_R2B | 0x6)
+
+#define AD9523_PLL1_REF_A_DIVIDER		(AD9523_R2B | 0x11)
+#define AD9523_PLL1_REF_B_DIVIDER		(AD9523_R2B | 0x13)
+#define AD9523_PLL1_REF_TEST_DIVIDER		(AD9523_R1B | 0x14)
+#define AD9523_PLL1_FEEDBACK_DIVIDER		(AD9523_R2B | 0x17)
+#define AD9523_PLL1_CHARGE_PUMP_CTRL		(AD9523_R2B | 0x19)
+#define AD9523_PLL1_INPUT_RECEIVERS_CTRL	(AD9523_R1B | 0x1A)
+#define AD9523_PLL1_REF_CTRL			(AD9523_R1B | 0x1B)
+#define AD9523_PLL1_MISC_CTRL			(AD9523_R1B | 0x1C)
+#define AD9523_PLL1_LOOP_FILTER_CTRL		(AD9523_R1B | 0x1D)
+
+#define AD9523_PLL2_CHARGE_PUMP			(AD9523_R1B | 0xF0)
+#define AD9523_PLL2_FEEDBACK_DIVIDER_AB		(AD9523_R1B | 0xF1)
+#define AD9523_PLL2_CTRL			(AD9523_R1B | 0xF2)
+#define AD9523_PLL2_VCO_CTRL			(AD9523_R1B | 0xF3)
+#define AD9523_PLL2_VCO_DIVIDER			(AD9523_R1B | 0xF4)
+#define AD9523_PLL2_LOOP_FILTER_CTRL		(AD9523_R2B | 0xF6)
+#define AD9523_PLL2_R2_DIVIDER			(AD9523_R1B | 0xF7)
+
+#define AD9523_CHANNEL_CLOCK_DIST(ch)		(AD9523_R3B | (0x192 + 3 * ch))
+
+#define AD9523_PLL1_OUTPUT_CTRL			(AD9523_R1B | 0x1BA)
+#define AD9523_PLL1_OUTPUT_CHANNEL_CTRL		(AD9523_R1B | 0x1BB)
+
+#define AD9523_READBACK_0			(AD9523_R1B | 0x22C)
+#define AD9523_READBACK_1			(AD9523_R1B | 0x22D)
+
+#define AD9523_STATUS_SIGNALS			(AD9523_R3B | 0x232)
+#define AD9523_POWER_DOWN_CTRL			(AD9523_R1B | 0x233)
+#define AD9523_IO_UPDATE			(AD9523_R1B | 0x234)
+
+#define AD9523_EEPROM_DATA_XFER_STATUS		(AD9523_R1B | 0xB00)
+#define AD9523_EEPROM_ERROR_READBACK		(AD9523_R1B | 0xB01)
+#define AD9523_EEPROM_CTRL1			(AD9523_R1B | 0xB02)
+#define AD9523_EEPROM_CTRL2			(AD9523_R1B | 0xB03)
+
+/* AD9523_SERIAL_PORT_CONFIG */
+
+#define AD9523_SER_CONF_SDO_ACTIVE		(1 << 7)
+#define AD9523_SER_CONF_SOFT_RESET		(1 << 5)
+
+/* AD9523_READBACK_CTRL */
+#define AD9523_READBACK_CTRL_READ_BUFFERED	(1 << 0)
+
+/* AD9523_PLL1_CHARGE_PUMP_CTRL */
+#define AD9523_PLL1_CHARGE_PUMP_CURRENT_nA(x)	(((x) / 500) & 0x7F)
+#define AD9523_PLL1_CHARGE_PUMP_TRISTATE	(1 << 7)
+#define AD9523_PLL1_CHARGE_PUMP_MODE_NORMAL	(3 << 8)
+#define AD9523_PLL1_CHARGE_PUMP_MODE_PUMP_DOWN	(2 << 8)
+#define AD9523_PLL1_CHARGE_PUMP_MODE_PUMP_UP	(1 << 8)
+#define AD9523_PLL1_CHARGE_PUMP_MODE_TRISTATE	(0 << 8)
+#define AD9523_PLL1_BACKLASH_PW_MIN		(0 << 10)
+#define AD9523_PLL1_BACKLASH_PW_LOW		(1 << 10)
+#define AD9523_PLL1_BACKLASH_PW_HIGH		(2 << 10)
+#define AD9523_PLL1_BACKLASH_PW_MAX		(3 << 10)
+
+/* AD9523_PLL1_INPUT_RECEIVERS_CTRL */
+#define AD9523_PLL1_REF_TEST_RCV_EN		(1 << 7)
+#define AD9523_PLL1_REFB_DIFF_RCV_EN		(1 << 6)
+#define AD9523_PLL1_REFA_DIFF_RCV_EN		(1 << 5)
+#define AD9523_PLL1_REFB_RCV_EN			(1 << 4)
+#define AD9523_PLL1_REFA_RCV_EN			(1 << 3)
+#define AD9523_PLL1_REFA_REFB_PWR_CTRL_EN	(1 << 2)
+#define AD9523_PLL1_OSC_IN_CMOS_NEG_INP_EN	(1 << 1)
+#define AD9523_PLL1_OSC_IN_DIFF_EN		(1 << 0)
+
+/* AD9523_PLL1_REF_CTRL */
+#define AD9523_PLL1_BYPASS_REF_TEST_DIV_EN	(1 << 7)
+#define AD9523_PLL1_BYPASS_FEEDBACK_DIV_EN	(1 << 6)
+#define AD9523_PLL1_ZERO_DELAY_MODE_INT		(1 << 5)
+#define AD9523_PLL1_ZERO_DELAY_MODE_EXT		(0 << 5)
+#define AD9523_PLL1_OSC_IN_PLL_FEEDBACK_EN	(1 << 4)
+#define AD9523_PLL1_ZD_IN_CMOS_NEG_INP_EN	(1 << 3)
+#define AD9523_PLL1_ZD_IN_DIFF_EN		(1 << 2)
+#define AD9523_PLL1_REFB_CMOS_NEG_INP_EN	(1 << 1)
+#define AD9523_PLL1_REFA_CMOS_NEG_INP_EN	(1 << 0)
+
+/* AD9523_PLL1_MISC_CTRL */
+#define AD9523_PLL1_REFB_INDEP_DIV_CTRL_EN	(1 << 7)
+#define AD9523_PLL1_OSC_CTRL_FAIL_VCC_BY2_EN	(1 << 6)
+#define AD9523_PLL1_REF_MODE(x)			((x) << 2)
+#define AD9523_PLL1_BYPASS_REFB_DIV		(1 << 1)
+#define AD9523_PLL1_BYPASS_REFA_DIV		(1 << 0)
+
+/* AD9523_PLL1_LOOP_FILTER_CTRL */
+#define AD9523_PLL1_LOOP_FILTER_RZERO(x)	((x) & 0xF)
+
+/* AD9523_PLL2_CHARGE_PUMP */
+#define AD9523_PLL2_CHARGE_PUMP_CURRENT_nA(x)	((x) / 3500)
+
+/* AD9523_PLL2_FEEDBACK_DIVIDER_AB */
+#define AD9523_PLL2_FB_NDIV_A_CNT(x)		(((x) & 0x3) << 6)
+#define AD9523_PLL2_FB_NDIV_B_CNT(x)		(((x) & 0x3F) << 0)
+#define AD9523_PLL2_FB_NDIV(a, b)		(4 * (b) + (a))
+
+/* AD9523_PLL2_CTRL */
+#define AD9523_PLL2_CHARGE_PUMP_MODE_NORMAL	(3 << 0)
+#define AD9523_PLL2_CHARGE_PUMP_MODE_PUMP_DOWN	(2 << 0)
+#define AD9523_PLL2_CHARGE_PUMP_MODE_PUMP_UP	(1 << 0)
+#define AD9523_PLL2_CHARGE_PUMP_MODE_TRISTATE	(0 << 0)
+#define AD9523_PLL2_BACKLASH_PW_MIN		(0 << 2)
+#define AD9523_PLL2_BACKLASH_PW_LOW		(1 << 2)
+#define AD9523_PLL2_BACKLASH_PW_HIGH		(2 << 2)
+#define AD9523_PLL2_BACKLASH_PW_MAX		(3 << 1)
+#define AD9523_PLL2_BACKLASH_CTRL_EN		(1 << 4)
+#define AD9523_PLL2_FREQ_DOUBLER_EN		(1 << 5)
+#define AD9523_PLL2_LOCK_DETECT_PWR_DOWN_EN	(1 << 7)
+
+/* AD9523_PLL2_VCO_CTRL */
+#define AD9523_PLL2_VCO_CALIBRATE		(1 << 1)
+#define AD9523_PLL2_FORCE_VCO_MIDSCALE		(1 << 2)
+#define AD9523_PLL2_FORCE_REFERENCE_VALID	(1 << 3)
+#define AD9523_PLL2_FORCE_RELEASE_SYNC		(1 << 4)
+
+/* AD9523_PLL2_VCO_DIVIDER */
+#define AD9523_PLL2_VCO_DIV_M1(x)		((((x) - 3) & 0x3) << 0)
+#define AD9523_PLL2_VCO_DIV_M2(x)		((((x) - 3) & 0x3) << 4)
+#define AD9523_PLL2_VCO_DIV_M1_PWR_DOWN_EN	(1 << 2)
+#define AD9523_PLL2_VCO_DIV_M2_PWR_DOWN_EN	(1 << 6)
+
+/* AD9523_PLL2_LOOP_FILTER_CTRL */
+#define AD9523_PLL2_LOOP_FILTER_CPOLE1(x)	(((x) & 0x7) << 0)
+#define AD9523_PLL2_LOOP_FILTER_RZERO(x)	(((x) & 0x7) << 3)
+#define AD9523_PLL2_LOOP_FILTER_RPOLE2(x)	(((x) & 0x7) << 6)
+#define AD9523_PLL2_LOOP_FILTER_RZERO_BYPASS_EN	(1 << 8)
+
+/* AD9523_PLL2_R2_DIVIDER */
+#define AD9523_PLL2_R2_DIVIDER_VAL(x)		(((x) & 0x1F) << 0)
+
+/* AD9523_CHANNEL_CLOCK_DIST */
+#define AD9523_CLK_DIST_DIV_PHASE(x)		(((x) & 0x3F) << 18)
+#define AD9523_CLK_DIST_DIV_PHASE_REV(x)	((ret >> 18) & 0x3F)
+#define AD9523_CLK_DIST_DIV(x)			((((x) - 1) & 0x3FF) << 8)
+#define AD9523_CLK_DIST_DIV_REV(x)		(((ret >> 8) & 0x3FF) + 1)
+#define AD9523_CLK_DIST_INV_DIV_OUTPUT_EN	(1 << 7)
+#define AD9523_CLK_DIST_IGNORE_SYNC_EN		(1 << 6)
+#define AD9523_CLK_DIST_PWR_DOWN_EN		(1 << 5)
+#define AD9523_CLK_DIST_LOW_PWR_MODE_EN		(1 << 4)
+#define AD9523_CLK_DIST_DRIVER_MODE(x)		(((x) & 0xF) << 0)
+
+/* AD9523_PLL1_OUTPUT_CTRL */
+#define AD9523_PLL1_OUTP_CTRL_VCO_DIV_SEL_CH6_M2	(1 << 7)
+#define AD9523_PLL1_OUTP_CTRL_VCO_DIV_SEL_CH5_M2	(1 << 6)
+#define AD9523_PLL1_OUTP_CTRL_VCO_DIV_SEL_CH4_M2	(1 << 5)
+#define AD9523_PLL1_OUTP_CTRL_CMOS_DRV_WEAK		(1 << 4)
+#define AD9523_PLL1_OUTP_CTRL_OUTPUT_DIV_1		(0 << 0)
+#define AD9523_PLL1_OUTP_CTRL_OUTPUT_DIV_2		(1 << 0)
+#define AD9523_PLL1_OUTP_CTRL_OUTPUT_DIV_4		(2 << 0)
+#define AD9523_PLL1_OUTP_CTRL_OUTPUT_DIV_8		(4 << 0)
+#define AD9523_PLL1_OUTP_CTRL_OUTPUT_DIV_16		(8 << 0)
+
+/* AD9523_PLL1_OUTPUT_CHANNEL_CTRL */
+#define AD9523_PLL1_OUTP_CH_CTRL_OUTPUT_PWR_DOWN_EN	(1 << 7)
+#define AD9523_PLL1_OUTP_CH_CTRL_VCO_DIV_SEL_CH9_M2	(1 << 6)
+#define AD9523_PLL1_OUTP_CH_CTRL_VCO_DIV_SEL_CH8_M2	(1 << 5)
+#define AD9523_PLL1_OUTP_CH_CTRL_VCO_DIV_SEL_CH7_M2	(1 << 4)
+#define AD9523_PLL1_OUTP_CH_CTRL_VCXO_SRC_SEL_CH3	(1 << 3)
+#define AD9523_PLL1_OUTP_CH_CTRL_VCXO_SRC_SEL_CH2	(1 << 2)
+#define AD9523_PLL1_OUTP_CH_CTRL_VCXO_SRC_SEL_CH1	(1 << 1)
+#define AD9523_PLL1_OUTP_CH_CTRL_VCXO_SRC_SEL_CH0	(1 << 0)
+
+/* AD9523_READBACK_0 */
+#define AD9523_READBACK_0_STAT_PLL2_REF_CLK		(1 << 7)
+#define AD9523_READBACK_0_STAT_PLL2_FB_CLK		(1 << 6)
+#define AD9523_READBACK_0_STAT_VCXO			(1 << 5)
+#define AD9523_READBACK_0_STAT_REF_TEST			(1 << 4)
+#define AD9523_READBACK_0_STAT_REFB			(1 << 3)
+#define AD9523_READBACK_0_STAT_REFA			(1 << 2)
+#define AD9523_READBACK_0_STAT_PLL2_LD			(1 << 1)
+#define AD9523_READBACK_0_STAT_PLL1_LD			(1 << 0)
+
+/* AD9523_READBACK_1 */
+#define AD9523_READBACK_1_HOLDOVER_ACTIVE		(1 << 3)
+#define AD9523_READBACK_1_AUTOMODE_SEL_REFB		(1 << 2)
+#define AD9523_READBACK_1_VCO_CALIB_IN_PROGRESS		(1 << 0)
+
+/* AD9523_STATUS_SIGNALS */
+#define AD9523_STATUS_SIGNALS_SYNC_MAN_CTRL		(1 << 16)
+#define AD9523_STATUS_MONITOR_01_PLL12_LOCKED		(0x302)
+/* AD9523_POWER_DOWN_CTRL */
+#define AD9523_POWER_DOWN_CTRL_PLL1_PWR_DOWN		(1 << 2)
+#define AD9523_POWER_DOWN_CTRL_PLL2_PWR_DOWN		(1 << 1)
+#define AD9523_POWER_DOWN_CTRL_DIST_PWR_DOWN		(1 << 0)
+
+/* AD9523_IO_UPDATE */
+#define AD9523_IO_UPDATE_EN				(1 << 0)
+
+/* AD9523_EEPROM_DATA_XFER_STATUS */
+#define AD9523_EEPROM_DATA_XFER_IN_PROGRESS		(1 << 0)
+
+/* AD9523_EEPROM_ERROR_READBACK */
+#define AD9523_EEPROM_ERROR_READBACK_FAIL		(1 << 0)
+
+/* AD9523_EEPROM_CTRL1 */
+#define AD9523_EEPROM_CTRL1_SOFT_EEPROM			(1 << 1)
+#define AD9523_EEPROM_CTRL1_EEPROM_WRITE_PROT_DIS	(1 << 0)
+
+/* AD9523_EEPROM_CTRL2 */
+#define AD9523_EEPROM_CTRL2_REG2EEPROM			(1 << 0)
+
+#define AD9523_NUM_CHAN					14
+#define AD9523_NUM_CHAN_ALT_CLK_SRC			10
+
+/* Helpers to avoid excess line breaks */
+#define AD_IFE(_pde, _a, _b) ((pdata->_pde) ? _a : _b)
+#define AD_IF(_pde, _a) AD_IFE(_pde, _a, 0)
+
+enum {
+	AD9523_STAT_PLL1_LD,
+	AD9523_STAT_PLL2_LD,
+	AD9523_STAT_REFA,
+	AD9523_STAT_REFB,
+	AD9523_STAT_REF_TEST,
+	AD9523_STAT_VCXO,
+	AD9523_STAT_PLL2_FB_CLK,
+	AD9523_STAT_PLL2_REF_CLK,
+	AD9523_SYNC,
+	AD9523_EEPROM,
+};
+
+enum {
+	AD9523_VCO1,
+	AD9523_VCO2,
+	AD9523_VCXO,
+	AD9523_NUM_CLK_SRC,
+};
+
+struct ad9523_state {
+	struct spi_device		*spi;
+	struct regulator		*reg;
+	struct ad9523_platform_data	*pdata;
+	struct iio_chan_spec		ad9523_channels[AD9523_NUM_CHAN];
+	struct gpio_desc		*pwrdown_gpio;
+	struct gpio_desc		*reset_gpio;
+	struct gpio_desc		*sync_gpio;
+
+	unsigned long		vcxo_freq;
+	unsigned long		vco_freq;
+	unsigned long		vco_out_freq[AD9523_NUM_CLK_SRC];
+	unsigned char		vco_out_map[AD9523_NUM_CHAN_ALT_CLK_SRC];
+
+	/*
+	 * Lock for accessing device registers. Some operations require
+	 * multiple consecutive R/W operations, during which the device
+	 * shouldn't be interrupted.  The buffers are also shared across
+	 * all operations so need to be protected on stand alone reads and
+	 * writes.
+	 */
+	struct mutex		lock;
+
+	/*
+	 * DMA (thus cache coherency maintenance) requires the
+	 * transfer buffers to live in their own cache lines.
+	 */
+	union {
+		__be32 d32;
+		u8 d8[4];
+	} data[2] ____cacheline_aligned;
+};
+
+static int ad9523_read(struct iio_dev *indio_dev, unsigned int addr)
+{
+	struct ad9523_state *st = iio_priv(indio_dev);
+	int ret;
+
+	/* We encode the register size 1..3 bytes into the register address.
+	 * On transfer we get the size from the register datum, and make sure
+	 * the result is properly aligned.
+	 */
+
+	struct spi_transfer t[] = {
+		{
+			.tx_buf = &st->data[0].d8[2],
+			.len = 2,
+		}, {
+			.rx_buf = &st->data[1].d8[4 - AD9523_TRANSF_LEN(addr)],
+			.len = AD9523_TRANSF_LEN(addr),
+		},
+	};
+
+	st->data[0].d32 = cpu_to_be32(AD9523_READ |
+				      AD9523_CNT(AD9523_TRANSF_LEN(addr)) |
+				      AD9523_ADDR(addr));
+
+	ret = spi_sync_transfer(st->spi, t, ARRAY_SIZE(t));
+	if (ret < 0)
+		dev_err(&indio_dev->dev, "read failed (%d)", ret);
+	else
+		ret = be32_to_cpu(st->data[1].d32) & (0xFFFFFF >>
+				  (8 * (3 - AD9523_TRANSF_LEN(addr))));
+
+	return ret;
+};
+
+static int ad9523_write(struct iio_dev *indio_dev,
+		unsigned int addr, unsigned int val)
+{
+	struct ad9523_state *st = iio_priv(indio_dev);
+	int ret;
+	struct spi_transfer t[] = {
+		{
+			.tx_buf = &st->data[0].d8[2],
+			.len = 2,
+		}, {
+			.tx_buf = &st->data[1].d8[4 - AD9523_TRANSF_LEN(addr)],
+			.len = AD9523_TRANSF_LEN(addr),
+		},
+	};
+
+	st->data[0].d32 = cpu_to_be32(AD9523_WRITE |
+				      AD9523_CNT(AD9523_TRANSF_LEN(addr)) |
+				      AD9523_ADDR(addr));
+	st->data[1].d32 = cpu_to_be32(val);
+
+	ret = spi_sync_transfer(st->spi, t, ARRAY_SIZE(t));
+
+	if (ret < 0)
+		dev_err(&indio_dev->dev, "write failed (%d)", ret);
+
+	return ret;
+}
+
+static int ad9523_io_update(struct iio_dev *indio_dev)
+{
+	return ad9523_write(indio_dev, AD9523_IO_UPDATE, AD9523_IO_UPDATE_EN);
+}
+
+static int ad9523_vco_out_map(struct iio_dev *indio_dev,
+			      unsigned int ch, unsigned int out)
+{
+	struct ad9523_state *st = iio_priv(indio_dev);
+	int ret;
+	unsigned int mask;
+
+	switch (ch) {
+	case 0 ... 3:
+		ret = ad9523_read(indio_dev, AD9523_PLL1_OUTPUT_CHANNEL_CTRL);
+		if (ret < 0)
+			break;
+		mask = AD9523_PLL1_OUTP_CH_CTRL_VCXO_SRC_SEL_CH0 << ch;
+		if (out) {
+			ret |= mask;
+			out = 2;
+		} else {
+			ret &= ~mask;
+		}
+		ret = ad9523_write(indio_dev,
+				   AD9523_PLL1_OUTPUT_CHANNEL_CTRL, ret);
+		break;
+	case 4 ... 6:
+		ret = ad9523_read(indio_dev, AD9523_PLL1_OUTPUT_CTRL);
+		if (ret < 0)
+			break;
+		mask = AD9523_PLL1_OUTP_CTRL_VCO_DIV_SEL_CH4_M2 << (ch - 4);
+		if (out)
+			ret |= mask;
+		else
+			ret &= ~mask;
+		ret = ad9523_write(indio_dev, AD9523_PLL1_OUTPUT_CTRL, ret);
+		break;
+	case 7 ... 9:
+		ret = ad9523_read(indio_dev, AD9523_PLL1_OUTPUT_CHANNEL_CTRL);
+		if (ret < 0)
+			break;
+		mask = AD9523_PLL1_OUTP_CH_CTRL_VCO_DIV_SEL_CH7_M2 << (ch - 7);
+		if (out)
+			ret |= mask;
+		else
+			ret &= ~mask;
+		ret = ad9523_write(indio_dev,
+				   AD9523_PLL1_OUTPUT_CHANNEL_CTRL, ret);
+		break;
+	default:
+		return 0;
+	}
+
+	st->vco_out_map[ch] = out;
+
+	return ret;
+}
+
+static int ad9523_set_clock_provider(struct iio_dev *indio_dev,
+			      unsigned int ch, unsigned long freq)
+{
+	struct ad9523_state *st = iio_priv(indio_dev);
+	long tmp1, tmp2;
+	bool use_alt_clk_src;
+
+	switch (ch) {
+	case 0 ... 3:
+		use_alt_clk_src = (freq == st->vco_out_freq[AD9523_VCXO]);
+		break;
+	case 4 ... 9:
+		tmp1 = st->vco_out_freq[AD9523_VCO1] / freq;
+		tmp2 = st->vco_out_freq[AD9523_VCO2] / freq;
+		tmp1 *= freq;
+		tmp2 *= freq;
+		use_alt_clk_src = (abs(tmp1 - freq) > abs(tmp2 - freq));
+		break;
+	default:
+		/* Ch 10..14: No action required, return success */
+		return 0;
+	}
+
+	return ad9523_vco_out_map(indio_dev, ch, use_alt_clk_src);
+}
+
+static int ad9523_store_eeprom(struct iio_dev *indio_dev)
+{
+	int ret, tmp;
+
+	ret = ad9523_write(indio_dev, AD9523_EEPROM_CTRL1,
+			   AD9523_EEPROM_CTRL1_EEPROM_WRITE_PROT_DIS);
+	if (ret < 0)
+		return ret;
+	ret = ad9523_write(indio_dev, AD9523_EEPROM_CTRL2,
+			   AD9523_EEPROM_CTRL2_REG2EEPROM);
+	if (ret < 0)
+		return ret;
+
+	tmp = 4;
+	do {
+		msleep(20);
+		ret = ad9523_read(indio_dev,
+				  AD9523_EEPROM_DATA_XFER_STATUS);
+		if (ret < 0)
+			return ret;
+	} while ((ret & AD9523_EEPROM_DATA_XFER_IN_PROGRESS) && tmp--);
+
+	ret = ad9523_write(indio_dev, AD9523_EEPROM_CTRL1, 0);
+	if (ret < 0)
+		return ret;
+
+	ret = ad9523_read(indio_dev, AD9523_EEPROM_ERROR_READBACK);
+	if (ret < 0)
+		return ret;
+
+	if (ret & AD9523_EEPROM_ERROR_READBACK_FAIL) {
+		dev_err(&indio_dev->dev, "Verify EEPROM failed");
+		ret = -EIO;
+	}
+
+	return ret;
+}
+
+static int ad9523_sync(struct iio_dev *indio_dev)
+{
+	int ret, tmp;
+
+	ret = ad9523_read(indio_dev, AD9523_STATUS_SIGNALS);
+	if (ret < 0)
+		return ret;
+
+	tmp = ret;
+	tmp |= AD9523_STATUS_SIGNALS_SYNC_MAN_CTRL;
+
+	ret = ad9523_write(indio_dev, AD9523_STATUS_SIGNALS, tmp);
+	if (ret < 0)
+		return ret;
+
+	ad9523_io_update(indio_dev);
+	tmp &= ~AD9523_STATUS_SIGNALS_SYNC_MAN_CTRL;
+
+	ret = ad9523_write(indio_dev, AD9523_STATUS_SIGNALS, tmp);
+	if (ret < 0)
+		return ret;
+
+	return ad9523_io_update(indio_dev);
+}
+
+static ssize_t ad9523_store(struct device *dev,
+				struct device_attribute *attr,
+				const char *buf, size_t len)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
+	struct ad9523_state *st = iio_priv(indio_dev);
+	bool state;
+	int ret;
+
+	ret = strtobool(buf, &state);
+	if (ret < 0)
+		return ret;
+
+	if (!state)
+		return len;
+
+	mutex_lock(&st->lock);
+	switch ((u32)this_attr->address) {
+	case AD9523_SYNC:
+		ret = ad9523_sync(indio_dev);
+		break;
+	case AD9523_EEPROM:
+		ret = ad9523_store_eeprom(indio_dev);
+		break;
+	default:
+		ret = -ENODEV;
+	}
+	mutex_unlock(&st->lock);
+
+	return ret ? ret : len;
+}
+
+static ssize_t ad9523_show(struct device *dev,
+			struct device_attribute *attr,
+			char *buf)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
+	struct ad9523_state *st = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&st->lock);
+	ret = ad9523_read(indio_dev, AD9523_READBACK_0);
+	if (ret >= 0) {
+		ret = sprintf(buf, "%d\n", !!(ret & (1 <<
+			(u32)this_attr->address)));
+	}
+	mutex_unlock(&st->lock);
+
+	return ret;
+}
+
+static IIO_DEVICE_ATTR(pll1_locked, S_IRUGO,
+			ad9523_show,
+			NULL,
+			AD9523_STAT_PLL1_LD);
+
+static IIO_DEVICE_ATTR(pll2_locked, S_IRUGO,
+			ad9523_show,
+			NULL,
+			AD9523_STAT_PLL2_LD);
+
+static IIO_DEVICE_ATTR(pll1_reference_clk_a_present, S_IRUGO,
+			ad9523_show,
+			NULL,
+			AD9523_STAT_REFA);
+
+static IIO_DEVICE_ATTR(pll1_reference_clk_b_present, S_IRUGO,
+			ad9523_show,
+			NULL,
+			AD9523_STAT_REFB);
+
+static IIO_DEVICE_ATTR(pll1_reference_clk_test_present, S_IRUGO,
+			ad9523_show,
+			NULL,
+			AD9523_STAT_REF_TEST);
+
+static IIO_DEVICE_ATTR(vcxo_clk_present, S_IRUGO,
+			ad9523_show,
+			NULL,
+			AD9523_STAT_VCXO);
+
+static IIO_DEVICE_ATTR(pll2_feedback_clk_present, S_IRUGO,
+			ad9523_show,
+			NULL,
+			AD9523_STAT_PLL2_FB_CLK);
+
+static IIO_DEVICE_ATTR(pll2_reference_clk_present, S_IRUGO,
+			ad9523_show,
+			NULL,
+			AD9523_STAT_PLL2_REF_CLK);
+
+static IIO_DEVICE_ATTR(sync_dividers, S_IWUSR,
+			NULL,
+			ad9523_store,
+			AD9523_SYNC);
+
+static IIO_DEVICE_ATTR(store_eeprom, S_IWUSR,
+			NULL,
+			ad9523_store,
+			AD9523_EEPROM);
+
+static struct attribute *ad9523_attributes[] = {
+	&iio_dev_attr_sync_dividers.dev_attr.attr,
+	&iio_dev_attr_store_eeprom.dev_attr.attr,
+	&iio_dev_attr_pll2_feedback_clk_present.dev_attr.attr,
+	&iio_dev_attr_pll2_reference_clk_present.dev_attr.attr,
+	&iio_dev_attr_pll1_reference_clk_a_present.dev_attr.attr,
+	&iio_dev_attr_pll1_reference_clk_b_present.dev_attr.attr,
+	&iio_dev_attr_pll1_reference_clk_test_present.dev_attr.attr,
+	&iio_dev_attr_vcxo_clk_present.dev_attr.attr,
+	&iio_dev_attr_pll1_locked.dev_attr.attr,
+	&iio_dev_attr_pll2_locked.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group ad9523_attribute_group = {
+	.attrs = ad9523_attributes,
+};
+
+static int ad9523_read_raw(struct iio_dev *indio_dev,
+			   struct iio_chan_spec const *chan,
+			   int *val,
+			   int *val2,
+			   long m)
+{
+	struct ad9523_state *st = iio_priv(indio_dev);
+	unsigned int code;
+	int ret;
+
+	mutex_lock(&st->lock);
+	ret = ad9523_read(indio_dev, AD9523_CHANNEL_CLOCK_DIST(chan->channel));
+	mutex_unlock(&st->lock);
+
+	if (ret < 0)
+		return ret;
+
+	switch (m) {
+	case IIO_CHAN_INFO_RAW:
+		*val = !(ret & AD9523_CLK_DIST_PWR_DOWN_EN);
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_FREQUENCY:
+		*val = st->vco_out_freq[st->vco_out_map[chan->channel]] /
+			AD9523_CLK_DIST_DIV_REV(ret);
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_PHASE:
+		code = (AD9523_CLK_DIST_DIV_PHASE_REV(ret) * 3141592) /
+			AD9523_CLK_DIST_DIV_REV(ret);
+		*val = code / 1000000;
+		*val2 = code % 1000000;
+		return IIO_VAL_INT_PLUS_MICRO;
+	default:
+		return -EINVAL;
+	}
+};
+
+static int ad9523_write_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int val,
+			    int val2,
+			    long mask)
+{
+	struct ad9523_state *st = iio_priv(indio_dev);
+	unsigned int reg;
+	int ret, tmp, code;
+
+	mutex_lock(&st->lock);
+	ret = ad9523_read(indio_dev, AD9523_CHANNEL_CLOCK_DIST(chan->channel));
+	if (ret < 0)
+		goto out;
+
+	reg = ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		if (val)
+			reg &= ~AD9523_CLK_DIST_PWR_DOWN_EN;
+		else
+			reg |= AD9523_CLK_DIST_PWR_DOWN_EN;
+		break;
+	case IIO_CHAN_INFO_FREQUENCY:
+		if (val <= 0) {
+			ret = -EINVAL;
+			goto out;
+		}
+		ret = ad9523_set_clock_provider(indio_dev, chan->channel, val);
+		if (ret < 0)
+			goto out;
+		tmp = st->vco_out_freq[st->vco_out_map[chan->channel]] / val;
+		tmp = clamp(tmp, 1, 1024);
+		reg &= ~(0x3FF << 8);
+		reg |= AD9523_CLK_DIST_DIV(tmp);
+		break;
+	case IIO_CHAN_INFO_PHASE:
+		code = val * 1000000 + val2 % 1000000;
+		tmp = (code * AD9523_CLK_DIST_DIV_REV(ret)) / 3141592;
+		tmp = clamp(tmp, 0, 63);
+		reg &= ~AD9523_CLK_DIST_DIV_PHASE(~0);
+		reg |= AD9523_CLK_DIST_DIV_PHASE(tmp);
+		break;
+	default:
+		ret = -EINVAL;
+		goto out;
+	}
+
+	ret = ad9523_write(indio_dev, AD9523_CHANNEL_CLOCK_DIST(chan->channel),
+			   reg);
+	if (ret < 0)
+		goto out;
+
+	ad9523_io_update(indio_dev);
+out:
+	mutex_unlock(&st->lock);
+	return ret;
+}
+
+static int ad9523_reg_access(struct iio_dev *indio_dev,
+			      unsigned int reg, unsigned int writeval,
+			      unsigned int *readval)
+{
+	struct ad9523_state *st = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&st->lock);
+	if (readval == NULL) {
+		ret = ad9523_write(indio_dev, reg | AD9523_R1B, writeval);
+		ad9523_io_update(indio_dev);
+	} else {
+		ret = ad9523_read(indio_dev, reg | AD9523_R1B);
+		if (ret < 0)
+			goto out_unlock;
+		*readval = ret;
+		ret = 0;
+	}
+
+out_unlock:
+	mutex_unlock(&st->lock);
+
+	return ret;
+}
+
+static const struct iio_info ad9523_info = {
+	.read_raw = &ad9523_read_raw,
+	.write_raw = &ad9523_write_raw,
+	.debugfs_reg_access = &ad9523_reg_access,
+	.attrs = &ad9523_attribute_group,
+};
+
+static int ad9523_setup(struct iio_dev *indio_dev)
+{
+	struct ad9523_state *st = iio_priv(indio_dev);
+	struct ad9523_platform_data *pdata = st->pdata;
+	struct ad9523_channel_spec *chan;
+	unsigned long active_mask = 0;
+	int ret, i;
+
+	ret = ad9523_write(indio_dev, AD9523_SERIAL_PORT_CONFIG,
+			   AD9523_SER_CONF_SOFT_RESET |
+			  (st->spi->mode & SPI_3WIRE ? 0 :
+			  AD9523_SER_CONF_SDO_ACTIVE));
+	if (ret < 0)
+		return ret;
+
+	ret = ad9523_write(indio_dev, AD9523_READBACK_CTRL,
+			  AD9523_READBACK_CTRL_READ_BUFFERED);
+	if (ret < 0)
+		return ret;
+
+	ret = ad9523_io_update(indio_dev);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * PLL1 Setup
+	 */
+	ret = ad9523_write(indio_dev, AD9523_PLL1_REF_A_DIVIDER,
+		pdata->refa_r_div);
+	if (ret < 0)
+		return ret;
+
+	ret = ad9523_write(indio_dev, AD9523_PLL1_REF_B_DIVIDER,
+		pdata->refb_r_div);
+	if (ret < 0)
+		return ret;
+
+	ret = ad9523_write(indio_dev, AD9523_PLL1_FEEDBACK_DIVIDER,
+		pdata->pll1_feedback_div);
+	if (ret < 0)
+		return ret;
+
+	ret = ad9523_write(indio_dev, AD9523_PLL1_CHARGE_PUMP_CTRL,
+		AD9523_PLL1_CHARGE_PUMP_CURRENT_nA(pdata->
+			pll1_charge_pump_current_nA) |
+		AD9523_PLL1_CHARGE_PUMP_MODE_NORMAL |
+		AD9523_PLL1_BACKLASH_PW_MIN);
+	if (ret < 0)
+		return ret;
+
+	ret = ad9523_write(indio_dev, AD9523_PLL1_INPUT_RECEIVERS_CTRL,
+		AD_IF(refa_diff_rcv_en, AD9523_PLL1_REFA_RCV_EN) |
+		AD_IF(refb_diff_rcv_en, AD9523_PLL1_REFB_RCV_EN) |
+		AD_IF(osc_in_diff_en, AD9523_PLL1_OSC_IN_DIFF_EN) |
+		AD_IF(osc_in_cmos_neg_inp_en,
+		      AD9523_PLL1_OSC_IN_CMOS_NEG_INP_EN) |
+		AD_IF(refa_diff_rcv_en, AD9523_PLL1_REFA_DIFF_RCV_EN) |
+		AD_IF(refb_diff_rcv_en, AD9523_PLL1_REFB_DIFF_RCV_EN));
+	if (ret < 0)
+		return ret;
+
+	ret = ad9523_write(indio_dev, AD9523_PLL1_REF_CTRL,
+		AD_IF(zd_in_diff_en, AD9523_PLL1_ZD_IN_DIFF_EN) |
+		AD_IF(zd_in_cmos_neg_inp_en,
+		      AD9523_PLL1_ZD_IN_CMOS_NEG_INP_EN) |
+		AD_IF(zero_delay_mode_internal_en,
+		      AD9523_PLL1_ZERO_DELAY_MODE_INT) |
+		AD_IF(osc_in_feedback_en, AD9523_PLL1_OSC_IN_PLL_FEEDBACK_EN) |
+		AD_IF(refa_cmos_neg_inp_en, AD9523_PLL1_REFA_CMOS_NEG_INP_EN) |
+		AD_IF(refb_cmos_neg_inp_en, AD9523_PLL1_REFB_CMOS_NEG_INP_EN));
+	if (ret < 0)
+		return ret;
+
+	ret = ad9523_write(indio_dev, AD9523_PLL1_MISC_CTRL,
+		AD9523_PLL1_REFB_INDEP_DIV_CTRL_EN |
+		AD9523_PLL1_REF_MODE(pdata->ref_mode));
+	if (ret < 0)
+		return ret;
+
+	ret = ad9523_write(indio_dev, AD9523_PLL1_LOOP_FILTER_CTRL,
+		AD9523_PLL1_LOOP_FILTER_RZERO(pdata->pll1_loop_filter_rzero));
+	if (ret < 0)
+		return ret;
+	/*
+	 * PLL2 Setup
+	 */
+
+	ret = ad9523_write(indio_dev, AD9523_PLL2_CHARGE_PUMP,
+		AD9523_PLL2_CHARGE_PUMP_CURRENT_nA(pdata->
+			pll2_charge_pump_current_nA));
+	if (ret < 0)
+		return ret;
+
+	ret = ad9523_write(indio_dev, AD9523_PLL2_FEEDBACK_DIVIDER_AB,
+		AD9523_PLL2_FB_NDIV_A_CNT(pdata->pll2_ndiv_a_cnt) |
+		AD9523_PLL2_FB_NDIV_B_CNT(pdata->pll2_ndiv_b_cnt));
+	if (ret < 0)
+		return ret;
+
+	ret = ad9523_write(indio_dev, AD9523_PLL2_CTRL,
+		AD9523_PLL2_CHARGE_PUMP_MODE_NORMAL |
+		AD9523_PLL2_BACKLASH_CTRL_EN |
+		AD_IF(pll2_freq_doubler_en, AD9523_PLL2_FREQ_DOUBLER_EN));
+	if (ret < 0)
+		return ret;
+
+	st->vco_freq = div_u64((unsigned long long)pdata->vcxo_freq *
+			       (pdata->pll2_freq_doubler_en ? 2 : 1) *
+			       AD9523_PLL2_FB_NDIV(pdata->pll2_ndiv_a_cnt,
+						   pdata->pll2_ndiv_b_cnt),
+			       pdata->pll2_r2_div);
+
+	ret = ad9523_write(indio_dev, AD9523_PLL2_VCO_CTRL,
+		AD9523_PLL2_VCO_CALIBRATE);
+	if (ret < 0)
+		return ret;
+
+	ret = ad9523_write(indio_dev, AD9523_PLL2_VCO_DIVIDER,
+		AD9523_PLL2_VCO_DIV_M1(pdata->pll2_vco_div_m1) |
+		AD9523_PLL2_VCO_DIV_M2(pdata->pll2_vco_div_m2) |
+		AD_IFE(pll2_vco_div_m1, 0,
+		       AD9523_PLL2_VCO_DIV_M1_PWR_DOWN_EN) |
+		AD_IFE(pll2_vco_div_m2, 0,
+		       AD9523_PLL2_VCO_DIV_M2_PWR_DOWN_EN));
+	if (ret < 0)
+		return ret;
+
+	if (pdata->pll2_vco_div_m1)
+		st->vco_out_freq[AD9523_VCO1] =
+			st->vco_freq / pdata->pll2_vco_div_m1;
+
+	if (pdata->pll2_vco_div_m2)
+		st->vco_out_freq[AD9523_VCO2] =
+			st->vco_freq / pdata->pll2_vco_div_m2;
+
+	st->vco_out_freq[AD9523_VCXO] = pdata->vcxo_freq;
+
+	ret = ad9523_write(indio_dev, AD9523_PLL2_R2_DIVIDER,
+		AD9523_PLL2_R2_DIVIDER_VAL(pdata->pll2_r2_div));
+	if (ret < 0)
+		return ret;
+
+	ret = ad9523_write(indio_dev, AD9523_PLL2_LOOP_FILTER_CTRL,
+		AD9523_PLL2_LOOP_FILTER_CPOLE1(pdata->cpole1) |
+		AD9523_PLL2_LOOP_FILTER_RZERO(pdata->rzero) |
+		AD9523_PLL2_LOOP_FILTER_RPOLE2(pdata->rpole2) |
+		AD_IF(rzero_bypass_en,
+		      AD9523_PLL2_LOOP_FILTER_RZERO_BYPASS_EN));
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < pdata->num_channels; i++) {
+		chan = &pdata->channels[i];
+		if (chan->channel_num < AD9523_NUM_CHAN) {
+			__set_bit(chan->channel_num, &active_mask);
+			ret = ad9523_write(indio_dev,
+				AD9523_CHANNEL_CLOCK_DIST(chan->channel_num),
+				AD9523_CLK_DIST_DRIVER_MODE(chan->driver_mode) |
+				AD9523_CLK_DIST_DIV(chan->channel_divider) |
+				AD9523_CLK_DIST_DIV_PHASE(chan->divider_phase) |
+				(chan->sync_ignore_en ?
+					AD9523_CLK_DIST_IGNORE_SYNC_EN : 0) |
+				(chan->divider_output_invert_en ?
+					AD9523_CLK_DIST_INV_DIV_OUTPUT_EN : 0) |
+				(chan->low_power_mode_en ?
+					AD9523_CLK_DIST_LOW_PWR_MODE_EN : 0) |
+				(chan->output_dis ?
+					AD9523_CLK_DIST_PWR_DOWN_EN : 0));
+			if (ret < 0)
+				return ret;
+
+			ret = ad9523_vco_out_map(indio_dev, chan->channel_num,
+					   chan->use_alt_clock_src);
+			if (ret < 0)
+				return ret;
+
+			st->ad9523_channels[i].type = IIO_ALTVOLTAGE;
+			st->ad9523_channels[i].output = 1;
+			st->ad9523_channels[i].indexed = 1;
+			st->ad9523_channels[i].channel = chan->channel_num;
+			st->ad9523_channels[i].extend_name =
+				chan->extended_name;
+			st->ad9523_channels[i].info_mask_separate =
+				BIT(IIO_CHAN_INFO_RAW) |
+				BIT(IIO_CHAN_INFO_PHASE) |
+				BIT(IIO_CHAN_INFO_FREQUENCY);
+		}
+	}
+
+	for_each_clear_bit(i, &active_mask, AD9523_NUM_CHAN) {
+		ret = ad9523_write(indio_dev,
+			     AD9523_CHANNEL_CLOCK_DIST(i),
+			     AD9523_CLK_DIST_DRIVER_MODE(TRISTATE) |
+			     AD9523_CLK_DIST_PWR_DOWN_EN);
+		if (ret < 0)
+			return ret;
+	}
+
+	ret = ad9523_write(indio_dev, AD9523_POWER_DOWN_CTRL, 0);
+	if (ret < 0)
+		return ret;
+
+	ret = ad9523_write(indio_dev, AD9523_STATUS_SIGNALS,
+			   AD9523_STATUS_MONITOR_01_PLL12_LOCKED);
+	if (ret < 0)
+		return ret;
+
+	ret = ad9523_io_update(indio_dev);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static void ad9523_reg_disable(void *data)
+{
+	struct regulator *reg = data;
+
+	regulator_disable(reg);
+}
+
+static int ad9523_probe(struct spi_device *spi)
+{
+	struct ad9523_platform_data *pdata = spi->dev.platform_data;
+	struct iio_dev *indio_dev;
+	struct ad9523_state *st;
+	int ret;
+
+	if (!pdata) {
+		dev_err(&spi->dev, "no platform data?\n");
+		return -EINVAL;
+	}
+
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
+	if (indio_dev == NULL)
+		return -ENOMEM;
+
+	st = iio_priv(indio_dev);
+
+	mutex_init(&st->lock);
+
+	st->reg = devm_regulator_get(&spi->dev, "vcc");
+	if (!IS_ERR(st->reg)) {
+		ret = regulator_enable(st->reg);
+		if (ret)
+			return ret;
+
+		ret = devm_add_action_or_reset(&spi->dev, ad9523_reg_disable,
+					       st->reg);
+		if (ret)
+			return ret;
+	}
+
+	st->pwrdown_gpio = devm_gpiod_get_optional(&spi->dev, "powerdown",
+		GPIOD_OUT_HIGH);
+	if (IS_ERR(st->pwrdown_gpio))
+		return PTR_ERR(st->pwrdown_gpio);
+
+	st->reset_gpio = devm_gpiod_get_optional(&spi->dev, "reset",
+		GPIOD_OUT_LOW);
+	if (IS_ERR(st->reset_gpio))
+		return PTR_ERR(st->reset_gpio);
+
+	if (st->reset_gpio) {
+		udelay(1);
+		gpiod_direction_output(st->reset_gpio, 1);
+	}
+
+	st->sync_gpio = devm_gpiod_get_optional(&spi->dev, "sync",
+		GPIOD_OUT_HIGH);
+	if (IS_ERR(st->sync_gpio))
+		return PTR_ERR(st->sync_gpio);
+
+	spi_set_drvdata(spi, indio_dev);
+	st->spi = spi;
+	st->pdata = pdata;
+
+	indio_dev->name = (pdata->name[0] != 0) ? pdata->name :
+			  spi_get_device_id(spi)->name;
+	indio_dev->info = &ad9523_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = st->ad9523_channels;
+	indio_dev->num_channels = pdata->num_channels;
+
+	ret = ad9523_setup(indio_dev);
+	if (ret < 0)
+		return ret;
+
+	return devm_iio_device_register(&spi->dev, indio_dev);
+}
+
+static const struct spi_device_id ad9523_id[] = {
+	{"ad9523-1", 9523},
+	{}
+};
+MODULE_DEVICE_TABLE(spi, ad9523_id);
+
+static struct spi_driver ad9523_driver = {
+	.driver = {
+		.name	= "ad9523",
+	},
+	.probe		= ad9523_probe,
+	.id_table	= ad9523_id,
+};
+module_spi_driver(ad9523_driver);
+
+MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
+MODULE_DESCRIPTION("Analog Devices AD9523 CLOCKDIST/PLL");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/frequency/adf4350.c b/drivers/iio/frequency/adf4350.c
new file mode 100644
index 000000000..8f885b0af
--- /dev/null
+++ b/drivers/iio/frequency/adf4350.c
@@ -0,0 +1,640 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * ADF4350/ADF4351 SPI Wideband Synthesizer driver
+ *
+ * Copyright 2012-2013 Analog Devices Inc.
+ */
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/spi/spi.h>
+#include <linux/regulator/consumer.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/gcd.h>
+#include <linux/gpio/consumer.h>
+#include <asm/div64.h>
+#include <linux/clk.h>
+#include <linux/of.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/frequency/adf4350.h>
+
+enum {
+	ADF4350_FREQ,
+	ADF4350_FREQ_REFIN,
+	ADF4350_FREQ_RESOLUTION,
+	ADF4350_PWRDOWN,
+};
+
+struct adf4350_state {
+	struct spi_device		*spi;
+	struct regulator		*reg;
+	struct gpio_desc		*lock_detect_gpiod;
+	struct adf4350_platform_data	*pdata;
+	struct clk			*clk;
+	unsigned long			clkin;
+	unsigned long			chspc; /* Channel Spacing */
+	unsigned long			fpfd; /* Phase Frequency Detector */
+	unsigned long			min_out_freq;
+	unsigned			r0_fract;
+	unsigned			r0_int;
+	unsigned			r1_mod;
+	unsigned			r4_rf_div_sel;
+	unsigned long			regs[6];
+	unsigned long			regs_hw[6];
+	unsigned long long		freq_req;
+	/*
+	 * Lock to protect the state of the device from potential concurrent
+	 * writes. The device is configured via a sequence of SPI writes,
+	 * and this lock is meant to prevent the start of another sequence
+	 * before another one has finished.
+	 */
+	struct mutex			lock;
+	/*
+	 * DMA (thus cache coherency maintenance) requires the
+	 * transfer buffers to live in their own cache lines.
+	 */
+	__be32				val ____cacheline_aligned;
+};
+
+static struct adf4350_platform_data default_pdata = {
+	.channel_spacing = 10000,
+	.r2_user_settings = ADF4350_REG2_PD_POLARITY_POS |
+			    ADF4350_REG2_CHARGE_PUMP_CURR_uA(2500),
+	.r3_user_settings = ADF4350_REG3_12BIT_CLKDIV_MODE(0),
+	.r4_user_settings = ADF4350_REG4_OUTPUT_PWR(3) |
+			    ADF4350_REG4_MUTE_TILL_LOCK_EN,
+};
+
+static int adf4350_sync_config(struct adf4350_state *st)
+{
+	int ret, i, doublebuf = 0;
+
+	for (i = ADF4350_REG5; i >= ADF4350_REG0; i--) {
+		if ((st->regs_hw[i] != st->regs[i]) ||
+			((i == ADF4350_REG0) && doublebuf)) {
+			switch (i) {
+			case ADF4350_REG1:
+			case ADF4350_REG4:
+				doublebuf = 1;
+				break;
+			}
+
+			st->val  = cpu_to_be32(st->regs[i] | i);
+			ret = spi_write(st->spi, &st->val, 4);
+			if (ret < 0)
+				return ret;
+			st->regs_hw[i] = st->regs[i];
+			dev_dbg(&st->spi->dev, "[%d] 0x%X\n",
+				i, (u32)st->regs[i] | i);
+		}
+	}
+	return 0;
+}
+
+static int adf4350_reg_access(struct iio_dev *indio_dev,
+			      unsigned reg, unsigned writeval,
+			      unsigned *readval)
+{
+	struct adf4350_state *st = iio_priv(indio_dev);
+	int ret;
+
+	if (reg > ADF4350_REG5)
+		return -EINVAL;
+
+	mutex_lock(&st->lock);
+	if (readval == NULL) {
+		st->regs[reg] = writeval & ~(BIT(0) | BIT(1) | BIT(2));
+		ret = adf4350_sync_config(st);
+	} else {
+		*readval =  st->regs_hw[reg];
+		ret = 0;
+	}
+	mutex_unlock(&st->lock);
+
+	return ret;
+}
+
+static int adf4350_tune_r_cnt(struct adf4350_state *st, unsigned short r_cnt)
+{
+	struct adf4350_platform_data *pdata = st->pdata;
+
+	do {
+		r_cnt++;
+		st->fpfd = (st->clkin * (pdata->ref_doubler_en ? 2 : 1)) /
+			   (r_cnt * (pdata->ref_div2_en ? 2 : 1));
+	} while (st->fpfd > ADF4350_MAX_FREQ_PFD);
+
+	return r_cnt;
+}
+
+static int adf4350_set_freq(struct adf4350_state *st, unsigned long long freq)
+{
+	struct adf4350_platform_data *pdata = st->pdata;
+	u64 tmp;
+	u32 div_gcd, prescaler, chspc;
+	u16 mdiv, r_cnt = 0;
+	u8 band_sel_div;
+
+	if (freq > ADF4350_MAX_OUT_FREQ || freq < st->min_out_freq)
+		return -EINVAL;
+
+	if (freq > ADF4350_MAX_FREQ_45_PRESC) {
+		prescaler = ADF4350_REG1_PRESCALER;
+		mdiv = 75;
+	} else {
+		prescaler = 0;
+		mdiv = 23;
+	}
+
+	st->r4_rf_div_sel = 0;
+
+	while (freq < ADF4350_MIN_VCO_FREQ) {
+		freq <<= 1;
+		st->r4_rf_div_sel++;
+	}
+
+	/*
+	 * Allow a predefined reference division factor
+	 * if not set, compute our own
+	 */
+	if (pdata->ref_div_factor)
+		r_cnt = pdata->ref_div_factor - 1;
+
+	chspc = st->chspc;
+
+	do  {
+		do {
+			do {
+				r_cnt = adf4350_tune_r_cnt(st, r_cnt);
+				st->r1_mod = st->fpfd / chspc;
+				if (r_cnt > ADF4350_MAX_R_CNT) {
+					/* try higher spacing values */
+					chspc++;
+					r_cnt = 0;
+				}
+			} while ((st->r1_mod > ADF4350_MAX_MODULUS) && r_cnt);
+		} while (r_cnt == 0);
+
+		tmp = freq * (u64)st->r1_mod + (st->fpfd >> 1);
+		do_div(tmp, st->fpfd); /* Div round closest (n + d/2)/d */
+		st->r0_fract = do_div(tmp, st->r1_mod);
+		st->r0_int = tmp;
+	} while (mdiv > st->r0_int);
+
+	band_sel_div = DIV_ROUND_UP(st->fpfd, ADF4350_MAX_BANDSEL_CLK);
+
+	if (st->r0_fract && st->r1_mod) {
+		div_gcd = gcd(st->r1_mod, st->r0_fract);
+		st->r1_mod /= div_gcd;
+		st->r0_fract /= div_gcd;
+	} else {
+		st->r0_fract = 0;
+		st->r1_mod = 1;
+	}
+
+	dev_dbg(&st->spi->dev, "VCO: %llu Hz, PFD %lu Hz\n"
+		"REF_DIV %d, R0_INT %d, R0_FRACT %d\n"
+		"R1_MOD %d, RF_DIV %d\nPRESCALER %s, BAND_SEL_DIV %d\n",
+		freq, st->fpfd, r_cnt, st->r0_int, st->r0_fract, st->r1_mod,
+		1 << st->r4_rf_div_sel, prescaler ? "8/9" : "4/5",
+		band_sel_div);
+
+	st->regs[ADF4350_REG0] = ADF4350_REG0_INT(st->r0_int) |
+				 ADF4350_REG0_FRACT(st->r0_fract);
+
+	st->regs[ADF4350_REG1] = ADF4350_REG1_PHASE(1) |
+				 ADF4350_REG1_MOD(st->r1_mod) |
+				 prescaler;
+
+	st->regs[ADF4350_REG2] =
+		ADF4350_REG2_10BIT_R_CNT(r_cnt) |
+		ADF4350_REG2_DOUBLE_BUFF_EN |
+		(pdata->ref_doubler_en ? ADF4350_REG2_RMULT2_EN : 0) |
+		(pdata->ref_div2_en ? ADF4350_REG2_RDIV2_EN : 0) |
+		(pdata->r2_user_settings & (ADF4350_REG2_PD_POLARITY_POS |
+		ADF4350_REG2_LDP_6ns | ADF4350_REG2_LDF_INT_N |
+		ADF4350_REG2_CHARGE_PUMP_CURR_uA(5000) |
+		ADF4350_REG2_MUXOUT(0x7) | ADF4350_REG2_NOISE_MODE(0x3)));
+
+	st->regs[ADF4350_REG3] = pdata->r3_user_settings &
+				 (ADF4350_REG3_12BIT_CLKDIV(0xFFF) |
+				 ADF4350_REG3_12BIT_CLKDIV_MODE(0x3) |
+				 ADF4350_REG3_12BIT_CSR_EN |
+				 ADF4351_REG3_CHARGE_CANCELLATION_EN |
+				 ADF4351_REG3_ANTI_BACKLASH_3ns_EN |
+				 ADF4351_REG3_BAND_SEL_CLOCK_MODE_HIGH);
+
+	st->regs[ADF4350_REG4] =
+		ADF4350_REG4_FEEDBACK_FUND |
+		ADF4350_REG4_RF_DIV_SEL(st->r4_rf_div_sel) |
+		ADF4350_REG4_8BIT_BAND_SEL_CLKDIV(band_sel_div) |
+		ADF4350_REG4_RF_OUT_EN |
+		(pdata->r4_user_settings &
+		(ADF4350_REG4_OUTPUT_PWR(0x3) |
+		ADF4350_REG4_AUX_OUTPUT_PWR(0x3) |
+		ADF4350_REG4_AUX_OUTPUT_EN |
+		ADF4350_REG4_AUX_OUTPUT_FUND |
+		ADF4350_REG4_MUTE_TILL_LOCK_EN));
+
+	st->regs[ADF4350_REG5] = ADF4350_REG5_LD_PIN_MODE_DIGITAL;
+	st->freq_req = freq;
+
+	return adf4350_sync_config(st);
+}
+
+static ssize_t adf4350_write(struct iio_dev *indio_dev,
+				    uintptr_t private,
+				    const struct iio_chan_spec *chan,
+				    const char *buf, size_t len)
+{
+	struct adf4350_state *st = iio_priv(indio_dev);
+	unsigned long long readin;
+	unsigned long tmp;
+	int ret;
+
+	ret = kstrtoull(buf, 10, &readin);
+	if (ret)
+		return ret;
+
+	mutex_lock(&st->lock);
+	switch ((u32)private) {
+	case ADF4350_FREQ:
+		ret = adf4350_set_freq(st, readin);
+		break;
+	case ADF4350_FREQ_REFIN:
+		if (readin > ADF4350_MAX_FREQ_REFIN) {
+			ret = -EINVAL;
+			break;
+		}
+
+		if (st->clk) {
+			tmp = clk_round_rate(st->clk, readin);
+			if (tmp != readin) {
+				ret = -EINVAL;
+				break;
+			}
+			ret = clk_set_rate(st->clk, tmp);
+			if (ret < 0)
+				break;
+		}
+		st->clkin = readin;
+		ret = adf4350_set_freq(st, st->freq_req);
+		break;
+	case ADF4350_FREQ_RESOLUTION:
+		if (readin == 0)
+			ret = -EINVAL;
+		else
+			st->chspc = readin;
+		break;
+	case ADF4350_PWRDOWN:
+		if (readin)
+			st->regs[ADF4350_REG2] |= ADF4350_REG2_POWER_DOWN_EN;
+		else
+			st->regs[ADF4350_REG2] &= ~ADF4350_REG2_POWER_DOWN_EN;
+
+		adf4350_sync_config(st);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+	mutex_unlock(&st->lock);
+
+	return ret ? ret : len;
+}
+
+static ssize_t adf4350_read(struct iio_dev *indio_dev,
+				   uintptr_t private,
+				   const struct iio_chan_spec *chan,
+				   char *buf)
+{
+	struct adf4350_state *st = iio_priv(indio_dev);
+	unsigned long long val;
+	int ret = 0;
+
+	mutex_lock(&st->lock);
+	switch ((u32)private) {
+	case ADF4350_FREQ:
+		val = (u64)((st->r0_int * st->r1_mod) + st->r0_fract) *
+			(u64)st->fpfd;
+		do_div(val, st->r1_mod * (1 << st->r4_rf_div_sel));
+		/* PLL unlocked? return error */
+		if (st->lock_detect_gpiod)
+			if (!gpiod_get_value(st->lock_detect_gpiod)) {
+				dev_dbg(&st->spi->dev, "PLL un-locked\n");
+				ret = -EBUSY;
+			}
+		break;
+	case ADF4350_FREQ_REFIN:
+		if (st->clk)
+			st->clkin = clk_get_rate(st->clk);
+
+		val = st->clkin;
+		break;
+	case ADF4350_FREQ_RESOLUTION:
+		val = st->chspc;
+		break;
+	case ADF4350_PWRDOWN:
+		val = !!(st->regs[ADF4350_REG2] & ADF4350_REG2_POWER_DOWN_EN);
+		break;
+	default:
+		ret = -EINVAL;
+		val = 0;
+	}
+	mutex_unlock(&st->lock);
+
+	return ret < 0 ? ret : sprintf(buf, "%llu\n", val);
+}
+
+#define _ADF4350_EXT_INFO(_name, _ident) { \
+	.name = _name, \
+	.read = adf4350_read, \
+	.write = adf4350_write, \
+	.private = _ident, \
+	.shared = IIO_SEPARATE, \
+}
+
+static const struct iio_chan_spec_ext_info adf4350_ext_info[] = {
+	/* Ideally we use IIO_CHAN_INFO_FREQUENCY, but there are
+	 * values > 2^32 in order to support the entire frequency range
+	 * in Hz. Using scale is a bit ugly.
+	 */
+	_ADF4350_EXT_INFO("frequency", ADF4350_FREQ),
+	_ADF4350_EXT_INFO("frequency_resolution", ADF4350_FREQ_RESOLUTION),
+	_ADF4350_EXT_INFO("refin_frequency", ADF4350_FREQ_REFIN),
+	_ADF4350_EXT_INFO("powerdown", ADF4350_PWRDOWN),
+	{ },
+};
+
+static const struct iio_chan_spec adf4350_chan = {
+	.type = IIO_ALTVOLTAGE,
+	.indexed = 1,
+	.output = 1,
+	.ext_info = adf4350_ext_info,
+};
+
+static const struct iio_info adf4350_info = {
+	.debugfs_reg_access = &adf4350_reg_access,
+};
+
+#ifdef CONFIG_OF
+static struct adf4350_platform_data *adf4350_parse_dt(struct device *dev)
+{
+	struct device_node *np = dev->of_node;
+	struct adf4350_platform_data *pdata;
+	unsigned int tmp;
+
+	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return NULL;
+
+	snprintf(&pdata->name[0], SPI_NAME_SIZE - 1, "%pOFn", np);
+
+	tmp = 10000;
+	of_property_read_u32(np, "adi,channel-spacing", &tmp);
+	pdata->channel_spacing = tmp;
+
+	tmp = 0;
+	of_property_read_u32(np, "adi,power-up-frequency", &tmp);
+	pdata->power_up_frequency = tmp;
+
+	tmp = 0;
+	of_property_read_u32(np, "adi,reference-div-factor", &tmp);
+	pdata->ref_div_factor = tmp;
+
+	pdata->ref_doubler_en = of_property_read_bool(np,
+			"adi,reference-doubler-enable");
+	pdata->ref_div2_en = of_property_read_bool(np,
+			"adi,reference-div2-enable");
+
+	/* r2_user_settings */
+	pdata->r2_user_settings = of_property_read_bool(np,
+			"adi,phase-detector-polarity-positive-enable") ?
+			ADF4350_REG2_PD_POLARITY_POS : 0;
+	pdata->r2_user_settings |= of_property_read_bool(np,
+			"adi,lock-detect-precision-6ns-enable") ?
+			ADF4350_REG2_LDP_6ns : 0;
+	pdata->r2_user_settings |= of_property_read_bool(np,
+			"adi,lock-detect-function-integer-n-enable") ?
+			ADF4350_REG2_LDF_INT_N : 0;
+
+	tmp = 2500;
+	of_property_read_u32(np, "adi,charge-pump-current", &tmp);
+	pdata->r2_user_settings |= ADF4350_REG2_CHARGE_PUMP_CURR_uA(tmp);
+
+	tmp = 0;
+	of_property_read_u32(np, "adi,muxout-select", &tmp);
+	pdata->r2_user_settings |= ADF4350_REG2_MUXOUT(tmp);
+
+	pdata->r2_user_settings |= of_property_read_bool(np,
+			"adi,low-spur-mode-enable") ?
+			ADF4350_REG2_NOISE_MODE(0x3) : 0;
+
+	/* r3_user_settings */
+
+	pdata->r3_user_settings = of_property_read_bool(np,
+			"adi,cycle-slip-reduction-enable") ?
+			ADF4350_REG3_12BIT_CSR_EN : 0;
+	pdata->r3_user_settings |= of_property_read_bool(np,
+			"adi,charge-cancellation-enable") ?
+			ADF4351_REG3_CHARGE_CANCELLATION_EN : 0;
+
+	pdata->r3_user_settings |= of_property_read_bool(np,
+			"adi,anti-backlash-3ns-enable") ?
+			ADF4351_REG3_ANTI_BACKLASH_3ns_EN : 0;
+	pdata->r3_user_settings |= of_property_read_bool(np,
+			"adi,band-select-clock-mode-high-enable") ?
+			ADF4351_REG3_BAND_SEL_CLOCK_MODE_HIGH : 0;
+
+	tmp = 0;
+	of_property_read_u32(np, "adi,12bit-clk-divider", &tmp);
+	pdata->r3_user_settings |= ADF4350_REG3_12BIT_CLKDIV(tmp);
+
+	tmp = 0;
+	of_property_read_u32(np, "adi,clk-divider-mode", &tmp);
+	pdata->r3_user_settings |= ADF4350_REG3_12BIT_CLKDIV_MODE(tmp);
+
+	/* r4_user_settings */
+
+	pdata->r4_user_settings = of_property_read_bool(np,
+			"adi,aux-output-enable") ?
+			ADF4350_REG4_AUX_OUTPUT_EN : 0;
+	pdata->r4_user_settings |= of_property_read_bool(np,
+			"adi,aux-output-fundamental-enable") ?
+			ADF4350_REG4_AUX_OUTPUT_FUND : 0;
+	pdata->r4_user_settings |= of_property_read_bool(np,
+			"adi,mute-till-lock-enable") ?
+			ADF4350_REG4_MUTE_TILL_LOCK_EN : 0;
+
+	tmp = 0;
+	of_property_read_u32(np, "adi,output-power", &tmp);
+	pdata->r4_user_settings |= ADF4350_REG4_OUTPUT_PWR(tmp);
+
+	tmp = 0;
+	of_property_read_u32(np, "adi,aux-output-power", &tmp);
+	pdata->r4_user_settings |= ADF4350_REG4_AUX_OUTPUT_PWR(tmp);
+
+	return pdata;
+}
+#else
+static
+struct adf4350_platform_data *adf4350_parse_dt(struct device *dev)
+{
+	return NULL;
+}
+#endif
+
+static int adf4350_probe(struct spi_device *spi)
+{
+	struct adf4350_platform_data *pdata;
+	struct iio_dev *indio_dev;
+	struct adf4350_state *st;
+	struct clk *clk = NULL;
+	int ret;
+
+	if (spi->dev.of_node) {
+		pdata = adf4350_parse_dt(&spi->dev);
+		if (pdata == NULL)
+			return -EINVAL;
+	} else {
+		pdata = spi->dev.platform_data;
+	}
+
+	if (!pdata) {
+		dev_warn(&spi->dev, "no platform data? using default\n");
+		pdata = &default_pdata;
+	}
+
+	if (!pdata->clkin) {
+		clk = devm_clk_get(&spi->dev, "clkin");
+		if (IS_ERR(clk))
+			return -EPROBE_DEFER;
+
+		ret = clk_prepare_enable(clk);
+		if (ret < 0)
+			return ret;
+	}
+
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
+	if (indio_dev == NULL) {
+		ret =  -ENOMEM;
+		goto error_disable_clk;
+	}
+
+	st = iio_priv(indio_dev);
+
+	st->reg = devm_regulator_get(&spi->dev, "vcc");
+	if (!IS_ERR(st->reg)) {
+		ret = regulator_enable(st->reg);
+		if (ret)
+			goto error_disable_clk;
+	}
+
+	spi_set_drvdata(spi, indio_dev);
+	st->spi = spi;
+	st->pdata = pdata;
+
+	indio_dev->name = (pdata->name[0] != 0) ? pdata->name :
+		spi_get_device_id(spi)->name;
+
+	indio_dev->info = &adf4350_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = &adf4350_chan;
+	indio_dev->num_channels = 1;
+
+	mutex_init(&st->lock);
+
+	st->chspc = pdata->channel_spacing;
+	if (clk) {
+		st->clk = clk;
+		st->clkin = clk_get_rate(clk);
+	} else {
+		st->clkin = pdata->clkin;
+	}
+
+	st->min_out_freq = spi_get_device_id(spi)->driver_data == 4351 ?
+		ADF4351_MIN_OUT_FREQ : ADF4350_MIN_OUT_FREQ;
+
+	memset(st->regs_hw, 0xFF, sizeof(st->regs_hw));
+
+	st->lock_detect_gpiod = devm_gpiod_get_optional(&spi->dev, NULL,
+							GPIOD_IN);
+	if (IS_ERR(st->lock_detect_gpiod)) {
+		ret = PTR_ERR(st->lock_detect_gpiod);
+		goto error_disable_reg;
+	}
+
+	if (pdata->power_up_frequency) {
+		ret = adf4350_set_freq(st, pdata->power_up_frequency);
+		if (ret)
+			goto error_disable_reg;
+	}
+
+	ret = iio_device_register(indio_dev);
+	if (ret)
+		goto error_disable_reg;
+
+	return 0;
+
+error_disable_reg:
+	if (!IS_ERR(st->reg))
+		regulator_disable(st->reg);
+error_disable_clk:
+	if (clk)
+		clk_disable_unprepare(clk);
+
+	return ret;
+}
+
+static int adf4350_remove(struct spi_device *spi)
+{
+	struct iio_dev *indio_dev = spi_get_drvdata(spi);
+	struct adf4350_state *st = iio_priv(indio_dev);
+	struct regulator *reg = st->reg;
+
+	st->regs[ADF4350_REG2] |= ADF4350_REG2_POWER_DOWN_EN;
+	adf4350_sync_config(st);
+
+	iio_device_unregister(indio_dev);
+
+	if (st->clk)
+		clk_disable_unprepare(st->clk);
+
+	if (!IS_ERR(reg))
+		regulator_disable(reg);
+
+	return 0;
+}
+
+static const struct of_device_id adf4350_of_match[] = {
+	{ .compatible = "adi,adf4350", },
+	{ .compatible = "adi,adf4351", },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, adf4350_of_match);
+
+static const struct spi_device_id adf4350_id[] = {
+	{"adf4350", 4350},
+	{"adf4351", 4351},
+	{}
+};
+MODULE_DEVICE_TABLE(spi, adf4350_id);
+
+static struct spi_driver adf4350_driver = {
+	.driver = {
+		.name	= "adf4350",
+		.of_match_table = of_match_ptr(adf4350_of_match),
+	},
+	.probe		= adf4350_probe,
+	.remove		= adf4350_remove,
+	.id_table	= adf4350_id,
+};
+module_spi_driver(adf4350_driver);
+
+MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
+MODULE_DESCRIPTION("Analog Devices ADF4350/ADF4351 PLL");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/frequency/adf4371.c b/drivers/iio/frequency/adf4371.c
new file mode 100644
index 000000000..ecd5e1899
--- /dev/null
+++ b/drivers/iio/frequency/adf4371.c
@@ -0,0 +1,631 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Analog Devices ADF4371 SPI Wideband Synthesizer driver
+ *
+ * Copyright 2019 Analog Devices Inc.
+ */
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/gcd.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/sysfs.h>
+#include <linux/spi/spi.h>
+
+#include <linux/iio/iio.h>
+
+/* Registers address macro */
+#define ADF4371_REG(x)			(x)
+
+/* ADF4371_REG0 */
+#define ADF4371_ADDR_ASC_MSK		BIT(2)
+#define ADF4371_ADDR_ASC(x)		FIELD_PREP(ADF4371_ADDR_ASC_MSK, x)
+#define ADF4371_ADDR_ASC_R_MSK		BIT(5)
+#define ADF4371_ADDR_ASC_R(x)		FIELD_PREP(ADF4371_ADDR_ASC_R_MSK, x)
+#define ADF4371_RESET_CMD		0x81
+
+/* ADF4371_REG17 */
+#define ADF4371_FRAC2WORD_L_MSK		GENMASK(7, 1)
+#define ADF4371_FRAC2WORD_L(x)		FIELD_PREP(ADF4371_FRAC2WORD_L_MSK, x)
+#define ADF4371_FRAC1WORD_MSK		BIT(0)
+#define ADF4371_FRAC1WORD(x)		FIELD_PREP(ADF4371_FRAC1WORD_MSK, x)
+
+/* ADF4371_REG18 */
+#define ADF4371_FRAC2WORD_H_MSK		GENMASK(6, 0)
+#define ADF4371_FRAC2WORD_H(x)		FIELD_PREP(ADF4371_FRAC2WORD_H_MSK, x)
+
+/* ADF4371_REG1A */
+#define ADF4371_MOD2WORD_MSK		GENMASK(5, 0)
+#define ADF4371_MOD2WORD(x)		FIELD_PREP(ADF4371_MOD2WORD_MSK, x)
+
+/* ADF4371_REG24 */
+#define ADF4371_RF_DIV_SEL_MSK		GENMASK(6, 4)
+#define ADF4371_RF_DIV_SEL(x)		FIELD_PREP(ADF4371_RF_DIV_SEL_MSK, x)
+
+/* ADF4371_REG25 */
+#define ADF4371_MUTE_LD_MSK		BIT(7)
+#define ADF4371_MUTE_LD(x)		FIELD_PREP(ADF4371_MUTE_LD_MSK, x)
+
+/* ADF4371_REG32 */
+#define ADF4371_TIMEOUT_MSK		GENMASK(1, 0)
+#define ADF4371_TIMEOUT(x)		FIELD_PREP(ADF4371_TIMEOUT_MSK, x)
+
+/* ADF4371_REG34 */
+#define ADF4371_VCO_ALC_TOUT_MSK	GENMASK(4, 0)
+#define ADF4371_VCO_ALC_TOUT(x)		FIELD_PREP(ADF4371_VCO_ALC_TOUT_MSK, x)
+
+/* Specifications */
+#define ADF4371_MIN_VCO_FREQ		4000000000ULL /* 4000 MHz */
+#define ADF4371_MAX_VCO_FREQ		8000000000ULL /* 8000 MHz */
+#define ADF4371_MAX_OUT_RF8_FREQ	ADF4371_MAX_VCO_FREQ /* Hz */
+#define ADF4371_MIN_OUT_RF8_FREQ	(ADF4371_MIN_VCO_FREQ / 64) /* Hz */
+#define ADF4371_MAX_OUT_RF16_FREQ	(ADF4371_MAX_VCO_FREQ * 2) /* Hz */
+#define ADF4371_MIN_OUT_RF16_FREQ	(ADF4371_MIN_VCO_FREQ * 2) /* Hz */
+#define ADF4371_MAX_OUT_RF32_FREQ	(ADF4371_MAX_VCO_FREQ * 4) /* Hz */
+#define ADF4371_MIN_OUT_RF32_FREQ	(ADF4371_MIN_VCO_FREQ * 4) /* Hz */
+
+#define ADF4371_MAX_FREQ_PFD		250000000UL /* Hz */
+#define ADF4371_MAX_FREQ_REFIN		600000000UL /* Hz */
+
+/* MOD1 is a 24-bit primary modulus with fixed value of 2^25 */
+#define ADF4371_MODULUS1		33554432ULL
+/* MOD2 is the programmable, 14-bit auxiliary fractional modulus */
+#define ADF4371_MAX_MODULUS2		BIT(14)
+
+#define ADF4371_CHECK_RANGE(freq, range) \
+	((freq > ADF4371_MAX_ ## range) || (freq < ADF4371_MIN_ ## range))
+
+enum {
+	ADF4371_FREQ,
+	ADF4371_POWER_DOWN,
+	ADF4371_CHANNEL_NAME
+};
+
+enum {
+	ADF4371_CH_RF8,
+	ADF4371_CH_RFAUX8,
+	ADF4371_CH_RF16,
+	ADF4371_CH_RF32
+};
+
+enum adf4371_variant {
+	ADF4371,
+	ADF4372
+};
+
+struct adf4371_pwrdown {
+	unsigned int reg;
+	unsigned int bit;
+};
+
+static const char * const adf4371_ch_names[] = {
+	"RF8x", "RFAUX8x", "RF16x", "RF32x"
+};
+
+static const struct adf4371_pwrdown adf4371_pwrdown_ch[4] = {
+	[ADF4371_CH_RF8] = { ADF4371_REG(0x25), 2 },
+	[ADF4371_CH_RFAUX8] = { ADF4371_REG(0x72), 3 },
+	[ADF4371_CH_RF16] = { ADF4371_REG(0x25), 3 },
+	[ADF4371_CH_RF32] = { ADF4371_REG(0x25), 4 },
+};
+
+static const struct reg_sequence adf4371_reg_defaults[] = {
+	{ ADF4371_REG(0x0),  0x18 },
+	{ ADF4371_REG(0x12), 0x40 },
+	{ ADF4371_REG(0x1E), 0x48 },
+	{ ADF4371_REG(0x20), 0x14 },
+	{ ADF4371_REG(0x22), 0x00 },
+	{ ADF4371_REG(0x23), 0x00 },
+	{ ADF4371_REG(0x24), 0x80 },
+	{ ADF4371_REG(0x25), 0x07 },
+	{ ADF4371_REG(0x27), 0xC5 },
+	{ ADF4371_REG(0x28), 0x83 },
+	{ ADF4371_REG(0x2C), 0x44 },
+	{ ADF4371_REG(0x2D), 0x11 },
+	{ ADF4371_REG(0x2E), 0x12 },
+	{ ADF4371_REG(0x2F), 0x94 },
+	{ ADF4371_REG(0x32), 0x04 },
+	{ ADF4371_REG(0x35), 0xFA },
+	{ ADF4371_REG(0x36), 0x30 },
+	{ ADF4371_REG(0x39), 0x07 },
+	{ ADF4371_REG(0x3A), 0x55 },
+	{ ADF4371_REG(0x3E), 0x0C },
+	{ ADF4371_REG(0x3F), 0x80 },
+	{ ADF4371_REG(0x40), 0x50 },
+	{ ADF4371_REG(0x41), 0x28 },
+	{ ADF4371_REG(0x47), 0xC0 },
+	{ ADF4371_REG(0x52), 0xF4 },
+	{ ADF4371_REG(0x70), 0x03 },
+	{ ADF4371_REG(0x71), 0x60 },
+	{ ADF4371_REG(0x72), 0x32 },
+};
+
+static const struct regmap_config adf4371_regmap_config = {
+	.reg_bits = 16,
+	.val_bits = 8,
+	.read_flag_mask = BIT(7),
+};
+
+struct adf4371_chip_info {
+	unsigned int num_channels;
+	const struct iio_chan_spec *channels;
+};
+
+struct adf4371_state {
+	struct spi_device *spi;
+	struct regmap *regmap;
+	struct clk *clkin;
+	/*
+	 * Lock for accessing device registers. Some operations require
+	 * multiple consecutive R/W operations, during which the device
+	 * shouldn't be interrupted. The buffers are also shared across
+	 * all operations so need to be protected on stand alone reads and
+	 * writes.
+	 */
+	struct mutex lock;
+	const struct adf4371_chip_info *chip_info;
+	unsigned long clkin_freq;
+	unsigned long fpfd;
+	unsigned int integer;
+	unsigned int fract1;
+	unsigned int fract2;
+	unsigned int mod2;
+	unsigned int rf_div_sel;
+	unsigned int ref_div_factor;
+	u8 buf[10] ____cacheline_aligned;
+};
+
+static unsigned long long adf4371_pll_fract_n_get_rate(struct adf4371_state *st,
+						       u32 channel)
+{
+	unsigned long long val, tmp;
+	unsigned int ref_div_sel;
+
+	val = (((u64)st->integer * ADF4371_MODULUS1) + st->fract1) * st->fpfd;
+	tmp = (u64)st->fract2 * st->fpfd;
+	do_div(tmp, st->mod2);
+	val += tmp + ADF4371_MODULUS1 / 2;
+
+	if (channel == ADF4371_CH_RF8 || channel == ADF4371_CH_RFAUX8)
+		ref_div_sel = st->rf_div_sel;
+	else
+		ref_div_sel = 0;
+
+	do_div(val, ADF4371_MODULUS1 * (1 << ref_div_sel));
+
+	if (channel == ADF4371_CH_RF16)
+		val <<= 1;
+	else if (channel == ADF4371_CH_RF32)
+		val <<= 2;
+
+	return val;
+}
+
+static void adf4371_pll_fract_n_compute(unsigned long long vco,
+				       unsigned long long pfd,
+				       unsigned int *integer,
+				       unsigned int *fract1,
+				       unsigned int *fract2,
+				       unsigned int *mod2)
+{
+	unsigned long long tmp;
+	u32 gcd_div;
+
+	tmp = do_div(vco, pfd);
+	tmp = tmp * ADF4371_MODULUS1;
+	*fract2 = do_div(tmp, pfd);
+
+	*integer = vco;
+	*fract1 = tmp;
+
+	*mod2 = pfd;
+
+	while (*mod2 > ADF4371_MAX_MODULUS2) {
+		*mod2 >>= 1;
+		*fract2 >>= 1;
+	}
+
+	gcd_div = gcd(*fract2, *mod2);
+	*mod2 /= gcd_div;
+	*fract2 /= gcd_div;
+}
+
+static int adf4371_set_freq(struct adf4371_state *st, unsigned long long freq,
+			    unsigned int channel)
+{
+	u32 cp_bleed;
+	u8 int_mode = 0;
+	int ret;
+
+	switch (channel) {
+	case ADF4371_CH_RF8:
+	case ADF4371_CH_RFAUX8:
+		if (ADF4371_CHECK_RANGE(freq, OUT_RF8_FREQ))
+			return -EINVAL;
+
+		st->rf_div_sel = 0;
+
+		while (freq < ADF4371_MIN_VCO_FREQ) {
+			freq <<= 1;
+			st->rf_div_sel++;
+		}
+		break;
+	case ADF4371_CH_RF16:
+		/* ADF4371 RF16 8000...16000 MHz */
+		if (ADF4371_CHECK_RANGE(freq, OUT_RF16_FREQ))
+			return -EINVAL;
+
+		freq >>= 1;
+		break;
+	case ADF4371_CH_RF32:
+		/* ADF4371 RF32 16000...32000 MHz */
+		if (ADF4371_CHECK_RANGE(freq, OUT_RF32_FREQ))
+			return -EINVAL;
+
+		freq >>= 2;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	adf4371_pll_fract_n_compute(freq, st->fpfd, &st->integer, &st->fract1,
+				    &st->fract2, &st->mod2);
+	st->buf[0] = st->integer >> 8;
+	st->buf[1] = 0x40; /* REG12 default */
+	st->buf[2] = 0x00;
+	st->buf[3] = st->fract1 & 0xFF;
+	st->buf[4] = st->fract1 >> 8;
+	st->buf[5] = st->fract1 >> 16;
+	st->buf[6] = ADF4371_FRAC2WORD_L(st->fract2 & 0x7F) |
+		     ADF4371_FRAC1WORD(st->fract1 >> 24);
+	st->buf[7] = ADF4371_FRAC2WORD_H(st->fract2 >> 7);
+	st->buf[8] = st->mod2 & 0xFF;
+	st->buf[9] = ADF4371_MOD2WORD(st->mod2 >> 8);
+
+	ret = regmap_bulk_write(st->regmap, ADF4371_REG(0x11), st->buf, 10);
+	if (ret < 0)
+		return ret;
+	/*
+	 * The R counter allows the input reference frequency to be
+	 * divided down to produce the reference clock to the PFD
+	 */
+	ret = regmap_write(st->regmap, ADF4371_REG(0x1F), st->ref_div_factor);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_update_bits(st->regmap, ADF4371_REG(0x24),
+				 ADF4371_RF_DIV_SEL_MSK,
+				 ADF4371_RF_DIV_SEL(st->rf_div_sel));
+	if (ret < 0)
+		return ret;
+
+	cp_bleed = DIV_ROUND_UP(400 * 1750, st->integer * 375);
+	cp_bleed = clamp(cp_bleed, 1U, 255U);
+	ret = regmap_write(st->regmap, ADF4371_REG(0x26), cp_bleed);
+	if (ret < 0)
+		return ret;
+	/*
+	 * Set to 1 when in INT mode (when FRAC1 = FRAC2 = 0),
+	 * and set to 0 when in FRAC mode.
+	 */
+	if (st->fract1 == 0 && st->fract2 == 0)
+		int_mode = 0x01;
+
+	ret = regmap_write(st->regmap, ADF4371_REG(0x2B), int_mode);
+	if (ret < 0)
+		return ret;
+
+	return regmap_write(st->regmap, ADF4371_REG(0x10), st->integer & 0xFF);
+}
+
+static ssize_t adf4371_read(struct iio_dev *indio_dev,
+			    uintptr_t private,
+			    const struct iio_chan_spec *chan,
+			    char *buf)
+{
+	struct adf4371_state *st = iio_priv(indio_dev);
+	unsigned long long val = 0;
+	unsigned int readval, reg, bit;
+	int ret;
+
+	switch ((u32)private) {
+	case ADF4371_FREQ:
+		val = adf4371_pll_fract_n_get_rate(st, chan->channel);
+		ret = regmap_read(st->regmap, ADF4371_REG(0x7C), &readval);
+		if (ret < 0)
+			break;
+
+		if (readval == 0x00) {
+			dev_dbg(&st->spi->dev, "PLL un-locked\n");
+			ret = -EBUSY;
+		}
+		break;
+	case ADF4371_POWER_DOWN:
+		reg = adf4371_pwrdown_ch[chan->channel].reg;
+		bit = adf4371_pwrdown_ch[chan->channel].bit;
+
+		ret = regmap_read(st->regmap, reg, &readval);
+		if (ret < 0)
+			break;
+
+		val = !(readval & BIT(bit));
+		break;
+	case ADF4371_CHANNEL_NAME:
+		return sprintf(buf, "%s\n", adf4371_ch_names[chan->channel]);
+	default:
+		ret = -EINVAL;
+		val = 0;
+		break;
+	}
+
+	return ret < 0 ? ret : sprintf(buf, "%llu\n", val);
+}
+
+static ssize_t adf4371_write(struct iio_dev *indio_dev,
+			     uintptr_t private,
+			     const struct iio_chan_spec *chan,
+			     const char *buf, size_t len)
+{
+	struct adf4371_state *st = iio_priv(indio_dev);
+	unsigned long long freq;
+	bool power_down;
+	unsigned int bit, readval, reg;
+	int ret;
+
+	mutex_lock(&st->lock);
+	switch ((u32)private) {
+	case ADF4371_FREQ:
+		ret = kstrtoull(buf, 10, &freq);
+		if (ret)
+			break;
+
+		ret = adf4371_set_freq(st, freq, chan->channel);
+		break;
+	case ADF4371_POWER_DOWN:
+		ret = kstrtobool(buf, &power_down);
+		if (ret)
+			break;
+
+		reg = adf4371_pwrdown_ch[chan->channel].reg;
+		bit = adf4371_pwrdown_ch[chan->channel].bit;
+		ret = regmap_read(st->regmap, reg, &readval);
+		if (ret < 0)
+			break;
+
+		readval &= ~BIT(bit);
+		readval |= (!power_down << bit);
+
+		ret = regmap_write(st->regmap, reg, readval);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+	mutex_unlock(&st->lock);
+
+	return ret ? ret : len;
+}
+
+#define _ADF4371_EXT_INFO(_name, _ident) { \
+		.name = _name, \
+		.read = adf4371_read, \
+		.write = adf4371_write, \
+		.private = _ident, \
+		.shared = IIO_SEPARATE, \
+}
+
+static const struct iio_chan_spec_ext_info adf4371_ext_info[] = {
+	/*
+	 * Ideally we use IIO_CHAN_INFO_FREQUENCY, but there are
+	 * values > 2^32 in order to support the entire frequency range
+	 * in Hz. Using scale is a bit ugly.
+	 */
+	_ADF4371_EXT_INFO("frequency", ADF4371_FREQ),
+	_ADF4371_EXT_INFO("powerdown", ADF4371_POWER_DOWN),
+	_ADF4371_EXT_INFO("name", ADF4371_CHANNEL_NAME),
+	{ },
+};
+
+#define ADF4371_CHANNEL(index) { \
+		.type = IIO_ALTVOLTAGE, \
+		.output = 1, \
+		.channel = index, \
+		.ext_info = adf4371_ext_info, \
+		.indexed = 1, \
+	}
+
+static const struct iio_chan_spec adf4371_chan[] = {
+	ADF4371_CHANNEL(ADF4371_CH_RF8),
+	ADF4371_CHANNEL(ADF4371_CH_RFAUX8),
+	ADF4371_CHANNEL(ADF4371_CH_RF16),
+	ADF4371_CHANNEL(ADF4371_CH_RF32),
+};
+
+static const struct adf4371_chip_info adf4371_chip_info[] = {
+	[ADF4371] = {
+		.channels = adf4371_chan,
+		.num_channels = 4,
+	},
+	[ADF4372] = {
+		.channels = adf4371_chan,
+		.num_channels = 3,
+	}
+};
+
+static int adf4371_reg_access(struct iio_dev *indio_dev,
+			      unsigned int reg,
+			      unsigned int writeval,
+			      unsigned int *readval)
+{
+	struct adf4371_state *st = iio_priv(indio_dev);
+
+	if (readval)
+		return regmap_read(st->regmap, reg, readval);
+	else
+		return regmap_write(st->regmap, reg, writeval);
+}
+
+static const struct iio_info adf4371_info = {
+	.debugfs_reg_access = &adf4371_reg_access,
+};
+
+static int adf4371_setup(struct adf4371_state *st)
+{
+	unsigned int synth_timeout = 2, timeout = 1, vco_alc_timeout = 1;
+	unsigned int vco_band_div, tmp;
+	int ret;
+
+	/* Perform a software reset */
+	ret = regmap_write(st->regmap, ADF4371_REG(0x0), ADF4371_RESET_CMD);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_multi_reg_write(st->regmap, adf4371_reg_defaults,
+				     ARRAY_SIZE(adf4371_reg_defaults));
+	if (ret < 0)
+		return ret;
+
+	/* Mute to Lock Detect */
+	if (device_property_read_bool(&st->spi->dev, "adi,mute-till-lock-en")) {
+		ret = regmap_update_bits(st->regmap, ADF4371_REG(0x25),
+					 ADF4371_MUTE_LD_MSK,
+					 ADF4371_MUTE_LD(1));
+		if (ret < 0)
+			return ret;
+	}
+
+	/* Set address in ascending order, so the bulk_write() will work */
+	ret = regmap_update_bits(st->regmap, ADF4371_REG(0x0),
+				 ADF4371_ADDR_ASC_MSK | ADF4371_ADDR_ASC_R_MSK,
+				 ADF4371_ADDR_ASC(1) | ADF4371_ADDR_ASC_R(1));
+	if (ret < 0)
+		return ret;
+	/*
+	 * Calculate and maximize PFD frequency
+	 * fPFD = REFIN × ((1 + D)/(R × (1 + T)))
+	 * Where D is the REFIN doubler bit, T is the reference divide by 2,
+	 * R is the reference division factor
+	 * TODO: it is assumed D and T equal 0.
+	 */
+	do {
+		st->ref_div_factor++;
+		st->fpfd = st->clkin_freq / st->ref_div_factor;
+	} while (st->fpfd > ADF4371_MAX_FREQ_PFD);
+
+	/* Calculate Timeouts */
+	vco_band_div = DIV_ROUND_UP(st->fpfd, 2400000U);
+
+	tmp = DIV_ROUND_CLOSEST(st->fpfd, 1000000U);
+	do {
+		timeout++;
+		if (timeout > 1023) {
+			timeout = 2;
+			synth_timeout++;
+		}
+	} while (synth_timeout * 1024 + timeout <= 20 * tmp);
+
+	do {
+		vco_alc_timeout++;
+	} while (vco_alc_timeout * 1024 - timeout <= 50 * tmp);
+
+	st->buf[0] = vco_band_div;
+	st->buf[1] = timeout & 0xFF;
+	st->buf[2] = ADF4371_TIMEOUT(timeout >> 8) | 0x04;
+	st->buf[3] = synth_timeout;
+	st->buf[4] = ADF4371_VCO_ALC_TOUT(vco_alc_timeout);
+
+	return regmap_bulk_write(st->regmap, ADF4371_REG(0x30), st->buf, 5);
+}
+
+static void adf4371_clk_disable(void *data)
+{
+	struct adf4371_state *st = data;
+
+	clk_disable_unprepare(st->clkin);
+}
+
+static int adf4371_probe(struct spi_device *spi)
+{
+	const struct spi_device_id *id = spi_get_device_id(spi);
+	struct iio_dev *indio_dev;
+	struct adf4371_state *st;
+	struct regmap *regmap;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	regmap = devm_regmap_init_spi(spi, &adf4371_regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(&spi->dev, "Error initializing spi regmap: %ld\n",
+			PTR_ERR(regmap));
+		return PTR_ERR(regmap);
+	}
+
+	st = iio_priv(indio_dev);
+	spi_set_drvdata(spi, indio_dev);
+	st->spi = spi;
+	st->regmap = regmap;
+	mutex_init(&st->lock);
+
+	st->chip_info = &adf4371_chip_info[id->driver_data];
+	indio_dev->name = id->name;
+	indio_dev->info = &adf4371_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = st->chip_info->channels;
+	indio_dev->num_channels = st->chip_info->num_channels;
+
+	st->clkin = devm_clk_get(&spi->dev, "clkin");
+	if (IS_ERR(st->clkin))
+		return PTR_ERR(st->clkin);
+
+	ret = clk_prepare_enable(st->clkin);
+	if (ret < 0)
+		return ret;
+
+	ret = devm_add_action_or_reset(&spi->dev, adf4371_clk_disable, st);
+	if (ret)
+		return ret;
+
+	st->clkin_freq = clk_get_rate(st->clkin);
+
+	ret = adf4371_setup(st);
+	if (ret < 0) {
+		dev_err(&spi->dev, "ADF4371 setup failed\n");
+		return ret;
+	}
+
+	return devm_iio_device_register(&spi->dev, indio_dev);
+}
+
+static const struct spi_device_id adf4371_id_table[] = {
+	{ "adf4371", ADF4371 },
+	{ "adf4372", ADF4372 },
+	{}
+};
+MODULE_DEVICE_TABLE(spi, adf4371_id_table);
+
+static const struct of_device_id adf4371_of_match[] = {
+	{ .compatible = "adi,adf4371" },
+	{ .compatible = "adi,adf4372" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, adf4371_of_match);
+
+static struct spi_driver adf4371_driver = {
+	.driver = {
+		.name = "adf4371",
+		.of_match_table = adf4371_of_match,
+	},
+	.probe = adf4371_probe,
+	.id_table = adf4371_id_table,
+};
+module_spi_driver(adf4371_driver);
+
+MODULE_AUTHOR("Stefan Popa <stefan.popa@analog.com>");
+MODULE_DESCRIPTION("Analog Devices ADF4371 SPI PLL");
+MODULE_LICENSE("GPL");