Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1279 insertions, 0 deletions

diff --git a/drivers/input/rmi4/rmi_driver.c b/drivers/input/rmi4/rmi_driver.c
new file mode 100644
index 000000000..258d5fe3d
--- /dev/null
+++ b/drivers/input/rmi4/rmi_driver.c
@@ -0,0 +1,1279 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2011-2016 Synaptics Incorporated
+ * Copyright (c) 2011 Unixphere
+ *
+ * This driver provides the core support for a single RMI4-based device.
+ *
+ * The RMI4 specification can be found here (URL split for line length):
+ *
+ * http://www.synaptics.com/sites/default/files/
+ *      511-000136-01-Rev-E-RMI4-Interfacing-Guide.pdf
+ */
+
+#include <linux/bitmap.h>
+#include <linux/delay.h>
+#include <linux/fs.h>
+#include <linux/irq.h>
+#include <linux/pm.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/irqdomain.h>
+#include <uapi/linux/input.h>
+#include <linux/rmi.h>
+#include "rmi_bus.h"
+#include "rmi_driver.h"
+
+#define HAS_NONSTANDARD_PDT_MASK 0x40
+#define RMI4_MAX_PAGE 0xff
+#define RMI4_PAGE_SIZE 0x100
+#define RMI4_PAGE_MASK 0xFF00
+
+#define RMI_DEVICE_RESET_CMD	0x01
+#define DEFAULT_RESET_DELAY_MS	100
+
+void rmi_free_function_list(struct rmi_device *rmi_dev)
+{
+	struct rmi_function *fn, *tmp;
+	struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
+
+	rmi_dbg(RMI_DEBUG_CORE, &rmi_dev->dev, "Freeing function list\n");
+
+	/* Doing it in the reverse order so F01 will be removed last */
+	list_for_each_entry_safe_reverse(fn, tmp,
+					 &data->function_list, node) {
+		list_del(&fn->node);
+		rmi_unregister_function(fn);
+	}
+
+	devm_kfree(&rmi_dev->dev, data->irq_memory);
+	data->irq_memory = NULL;
+	data->irq_status = NULL;
+	data->fn_irq_bits = NULL;
+	data->current_irq_mask = NULL;
+	data->new_irq_mask = NULL;
+
+	data->f01_container = NULL;
+	data->f34_container = NULL;
+}
+
+static int reset_one_function(struct rmi_function *fn)
+{
+	struct rmi_function_handler *fh;
+	int retval = 0;
+
+	if (!fn || !fn->dev.driver)
+		return 0;
+
+	fh = to_rmi_function_handler(fn->dev.driver);
+	if (fh->reset) {
+		retval = fh->reset(fn);
+		if (retval < 0)
+			dev_err(&fn->dev, "Reset failed with code %d.\n",
+				retval);
+	}
+
+	return retval;
+}
+
+static int configure_one_function(struct rmi_function *fn)
+{
+	struct rmi_function_handler *fh;
+	int retval = 0;
+
+	if (!fn || !fn->dev.driver)
+		return 0;
+
+	fh = to_rmi_function_handler(fn->dev.driver);
+	if (fh->config) {
+		retval = fh->config(fn);
+		if (retval < 0)
+			dev_err(&fn->dev, "Config failed with code %d.\n",
+				retval);
+	}
+
+	return retval;
+}
+
+static int rmi_driver_process_reset_requests(struct rmi_device *rmi_dev)
+{
+	struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
+	struct rmi_function *entry;
+	int retval;
+
+	list_for_each_entry(entry, &data->function_list, node) {
+		retval = reset_one_function(entry);
+		if (retval < 0)
+			return retval;
+	}
+
+	return 0;
+}
+
+static int rmi_driver_process_config_requests(struct rmi_device *rmi_dev)
+{
+	struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
+	struct rmi_function *entry;
+	int retval;
+
+	list_for_each_entry(entry, &data->function_list, node) {
+		retval = configure_one_function(entry);
+		if (retval < 0)
+			return retval;
+	}
+
+	return 0;
+}
+
+static int rmi_process_interrupt_requests(struct rmi_device *rmi_dev)
+{
+	struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
+	struct device *dev = &rmi_dev->dev;
+	int i;
+	int error;
+
+	if (!data)
+		return 0;
+
+	if (!data->attn_data.data) {
+		error = rmi_read_block(rmi_dev,
+				data->f01_container->fd.data_base_addr + 1,
+				data->irq_status, data->num_of_irq_regs);
+		if (error < 0) {
+			dev_err(dev, "Failed to read irqs, code=%d\n", error);
+			return error;
+		}
+	}
+
+	mutex_lock(&data->irq_mutex);
+	bitmap_and(data->irq_status, data->irq_status, data->fn_irq_bits,
+	       data->irq_count);
+	/*
+	 * At this point, irq_status has all bits that are set in the
+	 * interrupt status register and are enabled.
+	 */
+	mutex_unlock(&data->irq_mutex);
+
+	for_each_set_bit(i, data->irq_status, data->irq_count)
+		handle_nested_irq(irq_find_mapping(data->irqdomain, i));
+
+	if (data->input)
+		input_sync(data->input);
+
+	return 0;
+}
+
+void rmi_set_attn_data(struct rmi_device *rmi_dev, unsigned long irq_status,
+		       void *data, size_t size)
+{
+	struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
+	struct rmi4_attn_data attn_data;
+	void *fifo_data;
+
+	if (!drvdata->enabled)
+		return;
+
+	fifo_data = kmemdup(data, size, GFP_ATOMIC);
+	if (!fifo_data)
+		return;
+
+	attn_data.irq_status = irq_status;
+	attn_data.size = size;
+	attn_data.data = fifo_data;
+
+	kfifo_put(&drvdata->attn_fifo, attn_data);
+}
+EXPORT_SYMBOL_GPL(rmi_set_attn_data);
+
+static irqreturn_t rmi_irq_fn(int irq, void *dev_id)
+{
+	struct rmi_device *rmi_dev = dev_id;
+	struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
+	struct rmi4_attn_data attn_data = {0};
+	int ret, count;
+
+	count = kfifo_get(&drvdata->attn_fifo, &attn_data);
+	if (count) {
+		*(drvdata->irq_status) = attn_data.irq_status;
+		drvdata->attn_data = attn_data;
+	}
+
+	ret = rmi_process_interrupt_requests(rmi_dev);
+	if (ret)
+		rmi_dbg(RMI_DEBUG_CORE, &rmi_dev->dev,
+			"Failed to process interrupt request: %d\n", ret);
+
+	if (count) {
+		kfree(attn_data.data);
+		drvdata->attn_data.data = NULL;
+	}
+
+	if (!kfifo_is_empty(&drvdata->attn_fifo))
+		return rmi_irq_fn(irq, dev_id);
+
+	return IRQ_HANDLED;
+}
+
+static int rmi_irq_init(struct rmi_device *rmi_dev)
+{
+	struct rmi_device_platform_data *pdata = rmi_get_platform_data(rmi_dev);
+	struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
+	int irq_flags = irq_get_trigger_type(pdata->irq);
+	int ret;
+
+	if (!irq_flags)
+		irq_flags = IRQF_TRIGGER_LOW;
+
+	ret = devm_request_threaded_irq(&rmi_dev->dev, pdata->irq, NULL,
+					rmi_irq_fn, irq_flags | IRQF_ONESHOT,
+					dev_driver_string(rmi_dev->xport->dev),
+					rmi_dev);
+	if (ret < 0) {
+		dev_err(&rmi_dev->dev, "Failed to register interrupt %d\n",
+			pdata->irq);
+
+		return ret;
+	}
+
+	data->enabled = true;
+
+	return 0;
+}
+
+struct rmi_function *rmi_find_function(struct rmi_device *rmi_dev, u8 number)
+{
+	struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
+	struct rmi_function *entry;
+
+	list_for_each_entry(entry, &data->function_list, node) {
+		if (entry->fd.function_number == number)
+			return entry;
+	}
+
+	return NULL;
+}
+
+static int suspend_one_function(struct rmi_function *fn)
+{
+	struct rmi_function_handler *fh;
+	int retval = 0;
+
+	if (!fn || !fn->dev.driver)
+		return 0;
+
+	fh = to_rmi_function_handler(fn->dev.driver);
+	if (fh->suspend) {
+		retval = fh->suspend(fn);
+		if (retval < 0)
+			dev_err(&fn->dev, "Suspend failed with code %d.\n",
+				retval);
+	}
+
+	return retval;
+}
+
+static int rmi_suspend_functions(struct rmi_device *rmi_dev)
+{
+	struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
+	struct rmi_function *entry;
+	int retval;
+
+	list_for_each_entry(entry, &data->function_list, node) {
+		retval = suspend_one_function(entry);
+		if (retval < 0)
+			return retval;
+	}
+
+	return 0;
+}
+
+static int resume_one_function(struct rmi_function *fn)
+{
+	struct rmi_function_handler *fh;
+	int retval = 0;
+
+	if (!fn || !fn->dev.driver)
+		return 0;
+
+	fh = to_rmi_function_handler(fn->dev.driver);
+	if (fh->resume) {
+		retval = fh->resume(fn);
+		if (retval < 0)
+			dev_err(&fn->dev, "Resume failed with code %d.\n",
+				retval);
+	}
+
+	return retval;
+}
+
+static int rmi_resume_functions(struct rmi_device *rmi_dev)
+{
+	struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
+	struct rmi_function *entry;
+	int retval;
+
+	list_for_each_entry(entry, &data->function_list, node) {
+		retval = resume_one_function(entry);
+		if (retval < 0)
+			return retval;
+	}
+
+	return 0;
+}
+
+int rmi_enable_sensor(struct rmi_device *rmi_dev)
+{
+	int retval = 0;
+
+	retval = rmi_driver_process_config_requests(rmi_dev);
+	if (retval < 0)
+		return retval;
+
+	return rmi_process_interrupt_requests(rmi_dev);
+}
+
+/**
+ * rmi_driver_set_input_params - set input device id and other data.
+ *
+ * @rmi_dev: Pointer to an RMI device
+ * @input: Pointer to input device
+ *
+ */
+static int rmi_driver_set_input_params(struct rmi_device *rmi_dev,
+				struct input_dev *input)
+{
+	input->name = SYNAPTICS_INPUT_DEVICE_NAME;
+	input->id.vendor  = SYNAPTICS_VENDOR_ID;
+	input->id.bustype = BUS_RMI;
+	return 0;
+}
+
+static void rmi_driver_set_input_name(struct rmi_device *rmi_dev,
+				struct input_dev *input)
+{
+	struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
+	const char *device_name = rmi_f01_get_product_ID(data->f01_container);
+	char *name;
+
+	name = devm_kasprintf(&rmi_dev->dev, GFP_KERNEL,
+			      "Synaptics %s", device_name);
+	if (!name)
+		return;
+
+	input->name = name;
+}
+
+static int rmi_driver_set_irq_bits(struct rmi_device *rmi_dev,
+				   unsigned long *mask)
+{
+	int error = 0;
+	struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
+	struct device *dev = &rmi_dev->dev;
+
+	mutex_lock(&data->irq_mutex);
+	bitmap_or(data->new_irq_mask,
+		  data->current_irq_mask, mask, data->irq_count);
+
+	error = rmi_write_block(rmi_dev,
+			data->f01_container->fd.control_base_addr + 1,
+			data->new_irq_mask, data->num_of_irq_regs);
+	if (error < 0) {
+		dev_err(dev, "%s: Failed to change enabled interrupts!",
+							__func__);
+		goto error_unlock;
+	}
+	bitmap_copy(data->current_irq_mask, data->new_irq_mask,
+		    data->num_of_irq_regs);
+
+	bitmap_or(data->fn_irq_bits, data->fn_irq_bits, mask, data->irq_count);
+
+error_unlock:
+	mutex_unlock(&data->irq_mutex);
+	return error;
+}
+
+static int rmi_driver_clear_irq_bits(struct rmi_device *rmi_dev,
+				     unsigned long *mask)
+{
+	int error = 0;
+	struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
+	struct device *dev = &rmi_dev->dev;
+
+	mutex_lock(&data->irq_mutex);
+	bitmap_andnot(data->fn_irq_bits,
+		      data->fn_irq_bits, mask, data->irq_count);
+	bitmap_andnot(data->new_irq_mask,
+		  data->current_irq_mask, mask, data->irq_count);
+
+	error = rmi_write_block(rmi_dev,
+			data->f01_container->fd.control_base_addr + 1,
+			data->new_irq_mask, data->num_of_irq_regs);
+	if (error < 0) {
+		dev_err(dev, "%s: Failed to change enabled interrupts!",
+							__func__);
+		goto error_unlock;
+	}
+	bitmap_copy(data->current_irq_mask, data->new_irq_mask,
+		    data->num_of_irq_regs);
+
+error_unlock:
+	mutex_unlock(&data->irq_mutex);
+	return error;
+}
+
+static int rmi_driver_reset_handler(struct rmi_device *rmi_dev)
+{
+	struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
+	int error;
+
+	/*
+	 * Can get called before the driver is fully ready to deal with
+	 * this situation.
+	 */
+	if (!data || !data->f01_container) {
+		dev_warn(&rmi_dev->dev,
+			 "Not ready to handle reset yet!\n");
+		return 0;
+	}
+
+	error = rmi_read_block(rmi_dev,
+			       data->f01_container->fd.control_base_addr + 1,
+			       data->current_irq_mask, data->num_of_irq_regs);
+	if (error < 0) {
+		dev_err(&rmi_dev->dev, "%s: Failed to read current IRQ mask.\n",
+			__func__);
+		return error;
+	}
+
+	error = rmi_driver_process_reset_requests(rmi_dev);
+	if (error < 0)
+		return error;
+
+	error = rmi_driver_process_config_requests(rmi_dev);
+	if (error < 0)
+		return error;
+
+	return 0;
+}
+
+static int rmi_read_pdt_entry(struct rmi_device *rmi_dev,
+			      struct pdt_entry *entry, u16 pdt_address)
+{
+	u8 buf[RMI_PDT_ENTRY_SIZE];
+	int error;
+
+	error = rmi_read_block(rmi_dev, pdt_address, buf, RMI_PDT_ENTRY_SIZE);
+	if (error) {
+		dev_err(&rmi_dev->dev, "Read PDT entry at %#06x failed, code: %d.\n",
+				pdt_address, error);
+		return error;
+	}
+
+	entry->page_start = pdt_address & RMI4_PAGE_MASK;
+	entry->query_base_addr = buf[0];
+	entry->command_base_addr = buf[1];
+	entry->control_base_addr = buf[2];
+	entry->data_base_addr = buf[3];
+	entry->interrupt_source_count = buf[4] & RMI_PDT_INT_SOURCE_COUNT_MASK;
+	entry->function_version = (buf[4] & RMI_PDT_FUNCTION_VERSION_MASK) >> 5;
+	entry->function_number = buf[5];
+
+	return 0;
+}
+
+static void rmi_driver_copy_pdt_to_fd(const struct pdt_entry *pdt,
+				      struct rmi_function_descriptor *fd)
+{
+	fd->query_base_addr = pdt->query_base_addr + pdt->page_start;
+	fd->command_base_addr = pdt->command_base_addr + pdt->page_start;
+	fd->control_base_addr = pdt->control_base_addr + pdt->page_start;
+	fd->data_base_addr = pdt->data_base_addr + pdt->page_start;
+	fd->function_number = pdt->function_number;
+	fd->interrupt_source_count = pdt->interrupt_source_count;
+	fd->function_version = pdt->function_version;
+}
+
+#define RMI_SCAN_CONTINUE	0
+#define RMI_SCAN_DONE		1
+
+static int rmi_scan_pdt_page(struct rmi_device *rmi_dev,
+			     int page,
+			     int *empty_pages,
+			     void *ctx,
+			     int (*callback)(struct rmi_device *rmi_dev,
+					     void *ctx,
+					     const struct pdt_entry *entry))
+{
+	struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
+	struct pdt_entry pdt_entry;
+	u16 page_start = RMI4_PAGE_SIZE * page;
+	u16 pdt_start = page_start + PDT_START_SCAN_LOCATION;
+	u16 pdt_end = page_start + PDT_END_SCAN_LOCATION;
+	u16 addr;
+	int error;
+	int retval;
+
+	for (addr = pdt_start; addr >= pdt_end; addr -= RMI_PDT_ENTRY_SIZE) {
+		error = rmi_read_pdt_entry(rmi_dev, &pdt_entry, addr);
+		if (error)
+			return error;
+
+		if (RMI4_END_OF_PDT(pdt_entry.function_number))
+			break;
+
+		retval = callback(rmi_dev, ctx, &pdt_entry);
+		if (retval != RMI_SCAN_CONTINUE)
+			return retval;
+	}
+
+	/*
+	 * Count number of empty PDT pages. If a gap of two pages
+	 * or more is found, stop scanning.
+	 */
+	if (addr == pdt_start)
+		++*empty_pages;
+	else
+		*empty_pages = 0;
+
+	return (data->bootloader_mode || *empty_pages >= 2) ?
+					RMI_SCAN_DONE : RMI_SCAN_CONTINUE;
+}
+
+int rmi_scan_pdt(struct rmi_device *rmi_dev, void *ctx,
+		 int (*callback)(struct rmi_device *rmi_dev,
+		 void *ctx, const struct pdt_entry *entry))
+{
+	int page;
+	int empty_pages = 0;
+	int retval = RMI_SCAN_DONE;
+
+	for (page = 0; page <= RMI4_MAX_PAGE; page++) {
+		retval = rmi_scan_pdt_page(rmi_dev, page, &empty_pages,
+					   ctx, callback);
+		if (retval != RMI_SCAN_CONTINUE)
+			break;
+	}
+
+	return retval < 0 ? retval : 0;
+}
+
+int rmi_read_register_desc(struct rmi_device *d, u16 addr,
+				struct rmi_register_descriptor *rdesc)
+{
+	int ret;
+	u8 size_presence_reg;
+	u8 buf[35];
+	int presense_offset = 1;
+	u8 *struct_buf;
+	int reg;
+	int offset = 0;
+	int map_offset = 0;
+	int i;
+	int b;
+
+	/*
+	 * The first register of the register descriptor is the size of
+	 * the register descriptor's presense register.
+	 */
+	ret = rmi_read(d, addr, &size_presence_reg);
+	if (ret)
+		return ret;
+	++addr;
+
+	if (size_presence_reg < 0 || size_presence_reg > 35)
+		return -EIO;
+
+	memset(buf, 0, sizeof(buf));
+
+	/*
+	 * The presence register contains the size of the register structure
+	 * and a bitmap which identified which packet registers are present
+	 * for this particular register type (ie query, control, or data).
+	 */
+	ret = rmi_read_block(d, addr, buf, size_presence_reg);
+	if (ret)
+		return ret;
+	++addr;
+
+	if (buf[0] == 0) {
+		presense_offset = 3;
+		rdesc->struct_size = buf[1] | (buf[2] << 8);
+	} else {
+		rdesc->struct_size = buf[0];
+	}
+
+	for (i = presense_offset; i < size_presence_reg; i++) {
+		for (b = 0; b < 8; b++) {
+			if (buf[i] & (0x1 << b))
+				bitmap_set(rdesc->presense_map, map_offset, 1);
+			++map_offset;
+		}
+	}
+
+	rdesc->num_registers = bitmap_weight(rdesc->presense_map,
+						RMI_REG_DESC_PRESENSE_BITS);
+
+	rdesc->registers = devm_kcalloc(&d->dev,
+					rdesc->num_registers,
+					sizeof(struct rmi_register_desc_item),
+					GFP_KERNEL);
+	if (!rdesc->registers)
+		return -ENOMEM;
+
+	/*
+	 * Allocate a temporary buffer to hold the register structure.
+	 * I'm not using devm_kzalloc here since it will not be retained
+	 * after exiting this function
+	 */
+	struct_buf = kzalloc(rdesc->struct_size, GFP_KERNEL);
+	if (!struct_buf)
+		return -ENOMEM;
+
+	/*
+	 * The register structure contains information about every packet
+	 * register of this type. This includes the size of the packet
+	 * register and a bitmap of all subpackets contained in the packet
+	 * register.
+	 */
+	ret = rmi_read_block(d, addr, struct_buf, rdesc->struct_size);
+	if (ret)
+		goto free_struct_buff;
+
+	reg = find_first_bit(rdesc->presense_map, RMI_REG_DESC_PRESENSE_BITS);
+	for (i = 0; i < rdesc->num_registers; i++) {
+		struct rmi_register_desc_item *item = &rdesc->registers[i];
+		int reg_size = struct_buf[offset];
+
+		++offset;
+		if (reg_size == 0) {
+			reg_size = struct_buf[offset] |
+					(struct_buf[offset + 1] << 8);
+			offset += 2;
+		}
+
+		if (reg_size == 0) {
+			reg_size = struct_buf[offset] |
+					(struct_buf[offset + 1] << 8) |
+					(struct_buf[offset + 2] << 16) |
+					(struct_buf[offset + 3] << 24);
+			offset += 4;
+		}
+
+		item->reg = reg;
+		item->reg_size = reg_size;
+
+		map_offset = 0;
+
+		do {
+			for (b = 0; b < 7; b++) {
+				if (struct_buf[offset] & (0x1 << b))
+					bitmap_set(item->subpacket_map,
+						map_offset, 1);
+				++map_offset;
+			}
+		} while (struct_buf[offset++] & 0x80);
+
+		item->num_subpackets = bitmap_weight(item->subpacket_map,
+						RMI_REG_DESC_SUBPACKET_BITS);
+
+		rmi_dbg(RMI_DEBUG_CORE, &d->dev,
+			"%s: reg: %d reg size: %ld subpackets: %d\n", __func__,
+			item->reg, item->reg_size, item->num_subpackets);
+
+		reg = find_next_bit(rdesc->presense_map,
+				RMI_REG_DESC_PRESENSE_BITS, reg + 1);
+	}
+
+free_struct_buff:
+	kfree(struct_buf);
+	return ret;
+}
+
+const struct rmi_register_desc_item *rmi_get_register_desc_item(
+				struct rmi_register_descriptor *rdesc, u16 reg)
+{
+	const struct rmi_register_desc_item *item;
+	int i;
+
+	for (i = 0; i < rdesc->num_registers; i++) {
+		item = &rdesc->registers[i];
+		if (item->reg == reg)
+			return item;
+	}
+
+	return NULL;
+}
+
+size_t rmi_register_desc_calc_size(struct rmi_register_descriptor *rdesc)
+{
+	const struct rmi_register_desc_item *item;
+	int i;
+	size_t size = 0;
+
+	for (i = 0; i < rdesc->num_registers; i++) {
+		item = &rdesc->registers[i];
+		size += item->reg_size;
+	}
+	return size;
+}
+
+/* Compute the register offset relative to the base address */
+int rmi_register_desc_calc_reg_offset(
+		struct rmi_register_descriptor *rdesc, u16 reg)
+{
+	const struct rmi_register_desc_item *item;
+	int offset = 0;
+	int i;
+
+	for (i = 0; i < rdesc->num_registers; i++) {
+		item = &rdesc->registers[i];
+		if (item->reg == reg)
+			return offset;
+		++offset;
+	}
+	return -1;
+}
+
+bool rmi_register_desc_has_subpacket(const struct rmi_register_desc_item *item,
+	u8 subpacket)
+{
+	return find_next_bit(item->subpacket_map, RMI_REG_DESC_PRESENSE_BITS,
+				subpacket) == subpacket;
+}
+
+static int rmi_check_bootloader_mode(struct rmi_device *rmi_dev,
+				     const struct pdt_entry *pdt)
+{
+	struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
+	int ret;
+	u8 status;
+
+	if (pdt->function_number == 0x34 && pdt->function_version > 1) {
+		ret = rmi_read(rmi_dev, pdt->data_base_addr, &status);
+		if (ret) {
+			dev_err(&rmi_dev->dev,
+				"Failed to read F34 status: %d.\n", ret);
+			return ret;
+		}
+
+		if (status & BIT(7))
+			data->bootloader_mode = true;
+	} else if (pdt->function_number == 0x01) {
+		ret = rmi_read(rmi_dev, pdt->data_base_addr, &status);
+		if (ret) {
+			dev_err(&rmi_dev->dev,
+				"Failed to read F01 status: %d.\n", ret);
+			return ret;
+		}
+
+		if (status & BIT(6))
+			data->bootloader_mode = true;
+	}
+
+	return 0;
+}
+
+static int rmi_count_irqs(struct rmi_device *rmi_dev,
+			 void *ctx, const struct pdt_entry *pdt)
+{
+	int *irq_count = ctx;
+	int ret;
+
+	*irq_count += pdt->interrupt_source_count;
+
+	ret = rmi_check_bootloader_mode(rmi_dev, pdt);
+	if (ret < 0)
+		return ret;
+
+	return RMI_SCAN_CONTINUE;
+}
+
+int rmi_initial_reset(struct rmi_device *rmi_dev, void *ctx,
+		      const struct pdt_entry *pdt)
+{
+	int error;
+
+	if (pdt->function_number == 0x01) {
+		u16 cmd_addr = pdt->page_start + pdt->command_base_addr;
+		u8 cmd_buf = RMI_DEVICE_RESET_CMD;
+		const struct rmi_device_platform_data *pdata =
+				rmi_get_platform_data(rmi_dev);
+
+		if (rmi_dev->xport->ops->reset) {
+			error = rmi_dev->xport->ops->reset(rmi_dev->xport,
+								cmd_addr);
+			if (error)
+				return error;
+
+			return RMI_SCAN_DONE;
+		}
+
+		rmi_dbg(RMI_DEBUG_CORE, &rmi_dev->dev, "Sending reset\n");
+		error = rmi_write_block(rmi_dev, cmd_addr, &cmd_buf, 1);
+		if (error) {
+			dev_err(&rmi_dev->dev,
+				"Initial reset failed. Code = %d.\n", error);
+			return error;
+		}
+
+		mdelay(pdata->reset_delay_ms ?: DEFAULT_RESET_DELAY_MS);
+
+		return RMI_SCAN_DONE;
+	}
+
+	/* F01 should always be on page 0. If we don't find it there, fail. */
+	return pdt->page_start == 0 ? RMI_SCAN_CONTINUE : -ENODEV;
+}
+
+static int rmi_create_function(struct rmi_device *rmi_dev,
+			       void *ctx, const struct pdt_entry *pdt)
+{
+	struct device *dev = &rmi_dev->dev;
+	struct rmi_driver_data *data = dev_get_drvdata(dev);
+	int *current_irq_count = ctx;
+	struct rmi_function *fn;
+	int i;
+	int error;
+
+	rmi_dbg(RMI_DEBUG_CORE, dev, "Initializing F%02X.\n",
+			pdt->function_number);
+
+	fn = kzalloc(sizeof(struct rmi_function) +
+			BITS_TO_LONGS(data->irq_count) * sizeof(unsigned long),
+		     GFP_KERNEL);
+	if (!fn) {
+		dev_err(dev, "Failed to allocate memory for F%02X\n",
+			pdt->function_number);
+		return -ENOMEM;
+	}
+
+	INIT_LIST_HEAD(&fn->node);
+	rmi_driver_copy_pdt_to_fd(pdt, &fn->fd);
+
+	fn->rmi_dev = rmi_dev;
+
+	fn->num_of_irqs = pdt->interrupt_source_count;
+	fn->irq_pos = *current_irq_count;
+	*current_irq_count += fn->num_of_irqs;
+
+	for (i = 0; i < fn->num_of_irqs; i++)
+		set_bit(fn->irq_pos + i, fn->irq_mask);
+
+	error = rmi_register_function(fn);
+	if (error)
+		return error;
+
+	if (pdt->function_number == 0x01)
+		data->f01_container = fn;
+	else if (pdt->function_number == 0x34)
+		data->f34_container = fn;
+
+	list_add_tail(&fn->node, &data->function_list);
+
+	return RMI_SCAN_CONTINUE;
+}
+
+void rmi_enable_irq(struct rmi_device *rmi_dev, bool clear_wake)
+{
+	struct rmi_device_platform_data *pdata = rmi_get_platform_data(rmi_dev);
+	struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
+	int irq = pdata->irq;
+	int irq_flags;
+	int retval;
+
+	mutex_lock(&data->enabled_mutex);
+
+	if (data->enabled)
+		goto out;
+
+	enable_irq(irq);
+	data->enabled = true;
+	if (clear_wake && device_may_wakeup(rmi_dev->xport->dev)) {
+		retval = disable_irq_wake(irq);
+		if (retval)
+			dev_warn(&rmi_dev->dev,
+				 "Failed to disable irq for wake: %d\n",
+				 retval);
+	}
+
+	/*
+	 * Call rmi_process_interrupt_requests() after enabling irq,
+	 * otherwise we may lose interrupt on edge-triggered systems.
+	 */
+	irq_flags = irq_get_trigger_type(pdata->irq);
+	if (irq_flags & IRQ_TYPE_EDGE_BOTH)
+		rmi_process_interrupt_requests(rmi_dev);
+
+out:
+	mutex_unlock(&data->enabled_mutex);
+}
+
+void rmi_disable_irq(struct rmi_device *rmi_dev, bool enable_wake)
+{
+	struct rmi_device_platform_data *pdata = rmi_get_platform_data(rmi_dev);
+	struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
+	struct rmi4_attn_data attn_data = {0};
+	int irq = pdata->irq;
+	int retval, count;
+
+	mutex_lock(&data->enabled_mutex);
+
+	if (!data->enabled)
+		goto out;
+
+	data->enabled = false;
+	disable_irq(irq);
+	if (enable_wake && device_may_wakeup(rmi_dev->xport->dev)) {
+		retval = enable_irq_wake(irq);
+		if (retval)
+			dev_warn(&rmi_dev->dev,
+				 "Failed to enable irq for wake: %d\n",
+				 retval);
+	}
+
+	/* make sure the fifo is clean */
+	while (!kfifo_is_empty(&data->attn_fifo)) {
+		count = kfifo_get(&data->attn_fifo, &attn_data);
+		if (count)
+			kfree(attn_data.data);
+	}
+
+out:
+	mutex_unlock(&data->enabled_mutex);
+}
+
+int rmi_driver_suspend(struct rmi_device *rmi_dev, bool enable_wake)
+{
+	int retval;
+
+	retval = rmi_suspend_functions(rmi_dev);
+	if (retval)
+		dev_warn(&rmi_dev->dev, "Failed to suspend functions: %d\n",
+			retval);
+
+	rmi_disable_irq(rmi_dev, enable_wake);
+	return retval;
+}
+EXPORT_SYMBOL_GPL(rmi_driver_suspend);
+
+int rmi_driver_resume(struct rmi_device *rmi_dev, bool clear_wake)
+{
+	int retval;
+
+	rmi_enable_irq(rmi_dev, clear_wake);
+
+	retval = rmi_resume_functions(rmi_dev);
+	if (retval)
+		dev_warn(&rmi_dev->dev, "Failed to suspend functions: %d\n",
+			retval);
+
+	return retval;
+}
+EXPORT_SYMBOL_GPL(rmi_driver_resume);
+
+static int rmi_driver_remove(struct device *dev)
+{
+	struct rmi_device *rmi_dev = to_rmi_device(dev);
+	struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
+
+	rmi_disable_irq(rmi_dev, false);
+
+	irq_domain_remove(data->irqdomain);
+	data->irqdomain = NULL;
+
+	rmi_f34_remove_sysfs(rmi_dev);
+	rmi_free_function_list(rmi_dev);
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static int rmi_driver_of_probe(struct device *dev,
+				struct rmi_device_platform_data *pdata)
+{
+	int retval;
+
+	retval = rmi_of_property_read_u32(dev, &pdata->reset_delay_ms,
+					"syna,reset-delay-ms", 1);
+	if (retval)
+		return retval;
+
+	return 0;
+}
+#else
+static inline int rmi_driver_of_probe(struct device *dev,
+					struct rmi_device_platform_data *pdata)
+{
+	return -ENODEV;
+}
+#endif
+
+int rmi_probe_interrupts(struct rmi_driver_data *data)
+{
+	struct rmi_device *rmi_dev = data->rmi_dev;
+	struct device *dev = &rmi_dev->dev;
+	struct fwnode_handle *fwnode = rmi_dev->xport->dev->fwnode;
+	int irq_count = 0;
+	size_t size;
+	int retval;
+
+	/*
+	 * We need to count the IRQs and allocate their storage before scanning
+	 * the PDT and creating the function entries, because adding a new
+	 * function can trigger events that result in the IRQ related storage
+	 * being accessed.
+	 */
+	rmi_dbg(RMI_DEBUG_CORE, dev, "%s: Counting IRQs.\n", __func__);
+	data->bootloader_mode = false;
+
+	retval = rmi_scan_pdt(rmi_dev, &irq_count, rmi_count_irqs);
+	if (retval < 0) {
+		dev_err(dev, "IRQ counting failed with code %d.\n", retval);
+		return retval;
+	}
+
+	if (data->bootloader_mode)
+		dev_warn(dev, "Device in bootloader mode.\n");
+
+	/* Allocate and register a linear revmap irq_domain */
+	data->irqdomain = irq_domain_create_linear(fwnode, irq_count,
+						   &irq_domain_simple_ops,
+						   data);
+	if (!data->irqdomain) {
+		dev_err(&rmi_dev->dev, "Failed to create IRQ domain\n");
+		return -ENOMEM;
+	}
+
+	data->irq_count = irq_count;
+	data->num_of_irq_regs = (data->irq_count + 7) / 8;
+
+	size = BITS_TO_LONGS(data->irq_count) * sizeof(unsigned long);
+	data->irq_memory = devm_kcalloc(dev, size, 4, GFP_KERNEL);
+	if (!data->irq_memory) {
+		dev_err(dev, "Failed to allocate memory for irq masks.\n");
+		return -ENOMEM;
+	}
+
+	data->irq_status	= data->irq_memory + size * 0;
+	data->fn_irq_bits	= data->irq_memory + size * 1;
+	data->current_irq_mask	= data->irq_memory + size * 2;
+	data->new_irq_mask	= data->irq_memory + size * 3;
+
+	return retval;
+}
+
+int rmi_init_functions(struct rmi_driver_data *data)
+{
+	struct rmi_device *rmi_dev = data->rmi_dev;
+	struct device *dev = &rmi_dev->dev;
+	int irq_count = 0;
+	int retval;
+
+	rmi_dbg(RMI_DEBUG_CORE, dev, "%s: Creating functions.\n", __func__);
+	retval = rmi_scan_pdt(rmi_dev, &irq_count, rmi_create_function);
+	if (retval < 0) {
+		dev_err(dev, "Function creation failed with code %d.\n",
+			retval);
+		goto err_destroy_functions;
+	}
+
+	if (!data->f01_container) {
+		dev_err(dev, "Missing F01 container!\n");
+		retval = -EINVAL;
+		goto err_destroy_functions;
+	}
+
+	retval = rmi_read_block(rmi_dev,
+				data->f01_container->fd.control_base_addr + 1,
+				data->current_irq_mask, data->num_of_irq_regs);
+	if (retval < 0) {
+		dev_err(dev, "%s: Failed to read current IRQ mask.\n",
+			__func__);
+		goto err_destroy_functions;
+	}
+
+	return 0;
+
+err_destroy_functions:
+	rmi_free_function_list(rmi_dev);
+	return retval;
+}
+
+static int rmi_driver_probe(struct device *dev)
+{
+	struct rmi_driver *rmi_driver;
+	struct rmi_driver_data *data;
+	struct rmi_device_platform_data *pdata;
+	struct rmi_device *rmi_dev;
+	int retval;
+
+	rmi_dbg(RMI_DEBUG_CORE, dev, "%s: Starting probe.\n",
+			__func__);
+
+	if (!rmi_is_physical_device(dev)) {
+		rmi_dbg(RMI_DEBUG_CORE, dev, "Not a physical device.\n");
+		return -ENODEV;
+	}
+
+	rmi_dev = to_rmi_device(dev);
+	rmi_driver = to_rmi_driver(dev->driver);
+	rmi_dev->driver = rmi_driver;
+
+	pdata = rmi_get_platform_data(rmi_dev);
+
+	if (rmi_dev->xport->dev->of_node) {
+		retval = rmi_driver_of_probe(rmi_dev->xport->dev, pdata);
+		if (retval)
+			return retval;
+	}
+
+	data = devm_kzalloc(dev, sizeof(struct rmi_driver_data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	INIT_LIST_HEAD(&data->function_list);
+	data->rmi_dev = rmi_dev;
+	dev_set_drvdata(&rmi_dev->dev, data);
+
+	/*
+	 * Right before a warm boot, the sensor might be in some unusual state,
+	 * such as F54 diagnostics, or F34 bootloader mode after a firmware
+	 * or configuration update.  In order to clear the sensor to a known
+	 * state and/or apply any updates, we issue a initial reset to clear any
+	 * previous settings and force it into normal operation.
+	 *
+	 * We have to do this before actually building the PDT because
+	 * the reflash updates (if any) might cause various registers to move
+	 * around.
+	 *
+	 * For a number of reasons, this initial reset may fail to return
+	 * within the specified time, but we'll still be able to bring up the
+	 * driver normally after that failure.  This occurs most commonly in
+	 * a cold boot situation (where then firmware takes longer to come up
+	 * than from a warm boot) and the reset_delay_ms in the platform data
+	 * has been set too short to accommodate that.  Since the sensor will
+	 * eventually come up and be usable, we don't want to just fail here
+	 * and leave the customer's device unusable.  So we warn them, and
+	 * continue processing.
+	 */
+	retval = rmi_scan_pdt(rmi_dev, NULL, rmi_initial_reset);
+	if (retval < 0)
+		dev_warn(dev, "RMI initial reset failed! Continuing in spite of this.\n");
+
+	retval = rmi_read(rmi_dev, PDT_PROPERTIES_LOCATION, &data->pdt_props);
+	if (retval < 0) {
+		/*
+		 * we'll print out a warning and continue since
+		 * failure to get the PDT properties is not a cause to fail
+		 */
+		dev_warn(dev, "Could not read PDT properties from %#06x (code %d). Assuming 0x00.\n",
+			 PDT_PROPERTIES_LOCATION, retval);
+	}
+
+	mutex_init(&data->irq_mutex);
+	mutex_init(&data->enabled_mutex);
+
+	retval = rmi_probe_interrupts(data);
+	if (retval)
+		goto err;
+
+	if (rmi_dev->xport->input) {
+		/*
+		 * The transport driver already has an input device.
+		 * In some cases it is preferable to reuse the transport
+		 * devices input device instead of creating a new one here.
+		 * One example is some HID touchpads report "pass-through"
+		 * button events are not reported by rmi registers.
+		 */
+		data->input = rmi_dev->xport->input;
+	} else {
+		data->input = devm_input_allocate_device(dev);
+		if (!data->input) {
+			dev_err(dev, "%s: Failed to allocate input device.\n",
+				__func__);
+			retval = -ENOMEM;
+			goto err;
+		}
+		rmi_driver_set_input_params(rmi_dev, data->input);
+		data->input->phys = devm_kasprintf(dev, GFP_KERNEL,
+						"%s/input0", dev_name(dev));
+	}
+
+	retval = rmi_init_functions(data);
+	if (retval)
+		goto err;
+
+	retval = rmi_f34_create_sysfs(rmi_dev);
+	if (retval)
+		goto err;
+
+	if (data->input) {
+		rmi_driver_set_input_name(rmi_dev, data->input);
+		if (!rmi_dev->xport->input) {
+			retval = input_register_device(data->input);
+			if (retval) {
+				dev_err(dev, "%s: Failed to register input device.\n",
+					__func__);
+				goto err_destroy_functions;
+			}
+		}
+	}
+
+	retval = rmi_irq_init(rmi_dev);
+	if (retval < 0)
+		goto err_destroy_functions;
+
+	if (data->f01_container->dev.driver) {
+		/* Driver already bound, so enable ATTN now. */
+		retval = rmi_enable_sensor(rmi_dev);
+		if (retval)
+			goto err_disable_irq;
+	}
+
+	return 0;
+
+err_disable_irq:
+	rmi_disable_irq(rmi_dev, false);
+err_destroy_functions:
+	rmi_free_function_list(rmi_dev);
+err:
+	return retval;
+}
+
+static struct rmi_driver rmi_physical_driver = {
+	.driver = {
+		.owner	= THIS_MODULE,
+		.name	= "rmi4_physical",
+		.bus	= &rmi_bus_type,
+		.probe = rmi_driver_probe,
+		.remove = rmi_driver_remove,
+	},
+	.reset_handler = rmi_driver_reset_handler,
+	.clear_irq_bits = rmi_driver_clear_irq_bits,
+	.set_irq_bits = rmi_driver_set_irq_bits,
+	.set_input_params = rmi_driver_set_input_params,
+};
+
+bool rmi_is_physical_driver(struct device_driver *drv)
+{
+	return drv == &rmi_physical_driver.driver;
+}
+
+int __init rmi_register_physical_driver(void)
+{
+	int error;
+
+	error = driver_register(&rmi_physical_driver.driver);
+	if (error) {
+		pr_err("%s: driver register failed, code=%d.\n", __func__,
+		       error);
+		return error;
+	}
+
+	return 0;
+}
+
+void __exit rmi_unregister_physical_driver(void)
+{
+	driver_unregister(&rmi_physical_driver.driver);
+}