Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 192 insertions, 0 deletions

diff --git a/drivers/input/serio/ams_delta_serio.c b/drivers/input/serio/ams_delta_serio.c
new file mode 100644
index 000000000..1c0be299f
--- /dev/null
+++ b/drivers/input/serio/ams_delta_serio.c
@@ -0,0 +1,192 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Amstrad E3 (Delta) keyboard port driver
+ *
+ *  Copyright (c) 2006 Matt Callow
+ *  Copyright (c) 2010 Janusz Krzysztofik
+ *
+ * Thanks to Cliff Lawson for his help
+ *
+ * The Amstrad Delta keyboard (aka mailboard) uses normal PC-AT style serial
+ * transmission.  The keyboard port is formed of two GPIO lines, for clock
+ * and data.  Due to strict timing requirements of the interface,
+ * the serial data stream is read and processed by a FIQ handler.
+ * The resulting words are fetched by this driver from a circular buffer.
+ *
+ * Standard AT keyboard driver (atkbd) is used for handling the keyboard data.
+ * However, when used with the E3 mailboard that producecs non-standard
+ * scancodes, a custom key table must be prepared and loaded from userspace.
+ */
+#include <linux/irq.h>
+#include <linux/platform_data/ams-delta-fiq.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/serio.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+
+#define DRIVER_NAME	"ams-delta-serio"
+
+MODULE_AUTHOR("Matt Callow");
+MODULE_DESCRIPTION("AMS Delta (E3) keyboard port driver");
+MODULE_LICENSE("GPL");
+
+struct ams_delta_serio {
+	struct serio *serio;
+	struct regulator *vcc;
+	unsigned int *fiq_buffer;
+};
+
+static int check_data(struct serio *serio, int data)
+{
+	int i, parity = 0;
+
+	/* check valid stop bit */
+	if (!(data & 0x400)) {
+		dev_warn(&serio->dev, "invalid stop bit, data=0x%X\n", data);
+		return SERIO_FRAME;
+	}
+	/* calculate the parity */
+	for (i = 1; i < 10; i++) {
+		if (data & (1 << i))
+			parity++;
+	}
+	/* it should be odd */
+	if (!(parity & 0x01)) {
+		dev_warn(&serio->dev,
+			 "parity check failed, data=0x%X parity=0x%X\n", data,
+			 parity);
+		return SERIO_PARITY;
+	}
+	return 0;
+}
+
+static irqreturn_t ams_delta_serio_interrupt(int irq, void *dev_id)
+{
+	struct ams_delta_serio *priv = dev_id;
+	int *circ_buff = &priv->fiq_buffer[FIQ_CIRC_BUFF];
+	int data, dfl;
+	u8 scancode;
+
+	priv->fiq_buffer[FIQ_IRQ_PEND] = 0;
+
+	/*
+	 * Read data from the circular buffer, check it
+	 * and then pass it on the serio
+	 */
+	while (priv->fiq_buffer[FIQ_KEYS_CNT] > 0) {
+
+		data = circ_buff[priv->fiq_buffer[FIQ_HEAD_OFFSET]++];
+		priv->fiq_buffer[FIQ_KEYS_CNT]--;
+		if (priv->fiq_buffer[FIQ_HEAD_OFFSET] ==
+		    priv->fiq_buffer[FIQ_BUF_LEN])
+			priv->fiq_buffer[FIQ_HEAD_OFFSET] = 0;
+
+		dfl = check_data(priv->serio, data);
+		scancode = (u8) (data >> 1) & 0xFF;
+		serio_interrupt(priv->serio, scancode, dfl);
+	}
+	return IRQ_HANDLED;
+}
+
+static int ams_delta_serio_open(struct serio *serio)
+{
+	struct ams_delta_serio *priv = serio->port_data;
+
+	/* enable keyboard */
+	return regulator_enable(priv->vcc);
+}
+
+static void ams_delta_serio_close(struct serio *serio)
+{
+	struct ams_delta_serio *priv = serio->port_data;
+
+	/* disable keyboard */
+	regulator_disable(priv->vcc);
+}
+
+static int ams_delta_serio_init(struct platform_device *pdev)
+{
+	struct ams_delta_serio *priv;
+	struct serio *serio;
+	int irq, err;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->fiq_buffer = pdev->dev.platform_data;
+	if (!priv->fiq_buffer)
+		return -EINVAL;
+
+	priv->vcc = devm_regulator_get(&pdev->dev, "vcc");
+	if (IS_ERR(priv->vcc)) {
+		err = PTR_ERR(priv->vcc);
+		dev_err(&pdev->dev, "regulator request failed (%d)\n", err);
+		/*
+		 * When running on a non-dt platform and requested regulator
+		 * is not available, devm_regulator_get() never returns
+		 * -EPROBE_DEFER as it is not able to justify if the regulator
+		 * may still appear later.  On the other hand, the board can
+		 * still set full constriants flag at late_initcall in order
+		 * to instruct devm_regulator_get() to returnn a dummy one
+		 * if sufficient.  Hence, if we get -ENODEV here, let's convert
+		 * it to -EPROBE_DEFER and wait for the board to decide or
+		 * let Deferred Probe infrastructure handle this error.
+		 */
+		if (err == -ENODEV)
+			err = -EPROBE_DEFER;
+		return err;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return -ENXIO;
+
+	err = devm_request_irq(&pdev->dev, irq, ams_delta_serio_interrupt,
+			       IRQ_TYPE_EDGE_RISING, DRIVER_NAME, priv);
+	if (err < 0) {
+		dev_err(&pdev->dev, "IRQ request failed (%d)\n", err);
+		return err;
+	}
+
+	serio = kzalloc(sizeof(*serio), GFP_KERNEL);
+	if (!serio)
+		return -ENOMEM;
+
+	priv->serio = serio;
+
+	serio->id.type = SERIO_8042;
+	serio->open = ams_delta_serio_open;
+	serio->close = ams_delta_serio_close;
+	strlcpy(serio->name, "AMS DELTA keyboard adapter", sizeof(serio->name));
+	strlcpy(serio->phys, dev_name(&pdev->dev), sizeof(serio->phys));
+	serio->dev.parent = &pdev->dev;
+	serio->port_data = priv;
+
+	serio_register_port(serio);
+
+	platform_set_drvdata(pdev, priv);
+
+	dev_info(&serio->dev, "%s\n", serio->name);
+
+	return 0;
+}
+
+static int ams_delta_serio_exit(struct platform_device *pdev)
+{
+	struct ams_delta_serio *priv = platform_get_drvdata(pdev);
+
+	serio_unregister_port(priv->serio);
+
+	return 0;
+}
+
+static struct platform_driver ams_delta_serio_driver = {
+	.probe	= ams_delta_serio_init,
+	.remove	= ams_delta_serio_exit,
+	.driver	= {
+		.name	= DRIVER_NAME
+	},
+};
+module_platform_driver(ams_delta_serio_driver);