Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 401 insertions, 0 deletions

diff --git a/drivers/input/touchscreen/wm831x-ts.c b/drivers/input/touchscreen/wm831x-ts.c
new file mode 100644
index 000000000..bb1699e0d
--- /dev/null
+++ b/drivers/input/touchscreen/wm831x-ts.c
@@ -0,0 +1,401 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Touchscreen driver for WM831x PMICs
+ *
+ * Copyright 2011 Wolfson Microelectronics plc.
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/pm.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/irq.h>
+#include <linux/mfd/wm831x/pdata.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+/*
+ * R16424 (0x4028) - Touch Control 1
+ */
+#define WM831X_TCH_ENA                          0x8000  /* TCH_ENA */
+#define WM831X_TCH_CVT_ENA                      0x4000  /* TCH_CVT_ENA */
+#define WM831X_TCH_SLPENA                       0x1000  /* TCH_SLPENA */
+#define WM831X_TCH_Z_ENA                        0x0400  /* TCH_Z_ENA */
+#define WM831X_TCH_Y_ENA                        0x0200  /* TCH_Y_ENA */
+#define WM831X_TCH_X_ENA                        0x0100  /* TCH_X_ENA */
+#define WM831X_TCH_DELAY_MASK                   0x00E0  /* TCH_DELAY - [7:5] */
+#define WM831X_TCH_DELAY_SHIFT                       5  /* TCH_DELAY - [7:5] */
+#define WM831X_TCH_DELAY_WIDTH                       3  /* TCH_DELAY - [7:5] */
+#define WM831X_TCH_RATE_MASK                    0x001F  /* TCH_RATE - [4:0] */
+#define WM831X_TCH_RATE_SHIFT                        0  /* TCH_RATE - [4:0] */
+#define WM831X_TCH_RATE_WIDTH                        5  /* TCH_RATE - [4:0] */
+
+/*
+ * R16425 (0x4029) - Touch Control 2
+ */
+#define WM831X_TCH_PD_WK                        0x2000  /* TCH_PD_WK */
+#define WM831X_TCH_5WIRE                        0x1000  /* TCH_5WIRE */
+#define WM831X_TCH_PDONLY                       0x0800  /* TCH_PDONLY */
+#define WM831X_TCH_ISEL                         0x0100  /* TCH_ISEL */
+#define WM831X_TCH_RPU_MASK                     0x000F  /* TCH_RPU - [3:0] */
+#define WM831X_TCH_RPU_SHIFT                         0  /* TCH_RPU - [3:0] */
+#define WM831X_TCH_RPU_WIDTH                         4  /* TCH_RPU - [3:0] */
+
+/*
+ * R16426-8 (0x402A-C) - Touch Data X/Y/X
+ */
+#define WM831X_TCH_PD                           0x8000  /* TCH_PD1 */
+#define WM831X_TCH_DATA_MASK                    0x0FFF  /* TCH_DATA - [11:0] */
+#define WM831X_TCH_DATA_SHIFT                        0  /* TCH_DATA - [11:0] */
+#define WM831X_TCH_DATA_WIDTH                       12  /* TCH_DATA - [11:0] */
+
+struct wm831x_ts {
+	struct input_dev *input_dev;
+	struct wm831x *wm831x;
+	unsigned int data_irq;
+	unsigned int pd_irq;
+	bool pressure;
+	bool pen_down;
+	struct work_struct pd_data_work;
+};
+
+static void wm831x_pd_data_work(struct work_struct *work)
+{
+	struct wm831x_ts *wm831x_ts =
+		container_of(work, struct wm831x_ts, pd_data_work);
+
+	if (wm831x_ts->pen_down) {
+		enable_irq(wm831x_ts->data_irq);
+		dev_dbg(wm831x_ts->wm831x->dev, "IRQ PD->DATA done\n");
+	} else {
+		enable_irq(wm831x_ts->pd_irq);
+		dev_dbg(wm831x_ts->wm831x->dev, "IRQ DATA->PD done\n");
+	}
+}
+
+static irqreturn_t wm831x_ts_data_irq(int irq, void *irq_data)
+{
+	struct wm831x_ts *wm831x_ts = irq_data;
+	struct wm831x *wm831x = wm831x_ts->wm831x;
+	static int data_types[] = { ABS_X, ABS_Y, ABS_PRESSURE };
+	u16 data[3];
+	int count;
+	int i, ret;
+
+	if (wm831x_ts->pressure)
+		count = 3;
+	else
+		count = 2;
+
+	wm831x_set_bits(wm831x, WM831X_INTERRUPT_STATUS_1,
+			WM831X_TCHDATA_EINT, WM831X_TCHDATA_EINT);
+
+	ret = wm831x_bulk_read(wm831x, WM831X_TOUCH_DATA_X, count,
+			       data);
+	if (ret != 0) {
+		dev_err(wm831x->dev, "Failed to read touch data: %d\n",
+			ret);
+		return IRQ_NONE;
+	}
+
+	/*
+	 * We get a pen down reading on every reading, report pen up if any
+	 * individual reading does so.
+	 */
+	wm831x_ts->pen_down = true;
+	for (i = 0; i < count; i++) {
+		if (!(data[i] & WM831X_TCH_PD)) {
+			wm831x_ts->pen_down = false;
+			continue;
+		}
+		input_report_abs(wm831x_ts->input_dev, data_types[i],
+				 data[i] & WM831X_TCH_DATA_MASK);
+	}
+
+	if (!wm831x_ts->pen_down) {
+		/* Switch from data to pen down */
+		dev_dbg(wm831x->dev, "IRQ DATA->PD\n");
+
+		disable_irq_nosync(wm831x_ts->data_irq);
+
+		/* Don't need data any more */
+		wm831x_set_bits(wm831x, WM831X_TOUCH_CONTROL_1,
+				WM831X_TCH_X_ENA | WM831X_TCH_Y_ENA |
+				WM831X_TCH_Z_ENA, 0);
+
+		/* Flush any final samples that arrived while reading */
+		wm831x_set_bits(wm831x, WM831X_INTERRUPT_STATUS_1,
+				WM831X_TCHDATA_EINT, WM831X_TCHDATA_EINT);
+
+		wm831x_bulk_read(wm831x, WM831X_TOUCH_DATA_X, count, data);
+
+		if (wm831x_ts->pressure)
+			input_report_abs(wm831x_ts->input_dev,
+					 ABS_PRESSURE, 0);
+
+		input_report_key(wm831x_ts->input_dev, BTN_TOUCH, 0);
+
+		schedule_work(&wm831x_ts->pd_data_work);
+	} else {
+		input_report_key(wm831x_ts->input_dev, BTN_TOUCH, 1);
+	}
+
+	input_sync(wm831x_ts->input_dev);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t wm831x_ts_pen_down_irq(int irq, void *irq_data)
+{
+	struct wm831x_ts *wm831x_ts = irq_data;
+	struct wm831x *wm831x = wm831x_ts->wm831x;
+	int ena = 0;
+
+	if (wm831x_ts->pen_down)
+		return IRQ_HANDLED;
+
+	disable_irq_nosync(wm831x_ts->pd_irq);
+
+	/* Start collecting data */
+	if (wm831x_ts->pressure)
+		ena |= WM831X_TCH_Z_ENA;
+
+	wm831x_set_bits(wm831x, WM831X_TOUCH_CONTROL_1,
+			WM831X_TCH_X_ENA | WM831X_TCH_Y_ENA | WM831X_TCH_Z_ENA,
+			WM831X_TCH_X_ENA | WM831X_TCH_Y_ENA | ena);
+
+	wm831x_set_bits(wm831x, WM831X_INTERRUPT_STATUS_1,
+			WM831X_TCHPD_EINT, WM831X_TCHPD_EINT);
+
+	wm831x_ts->pen_down = true;
+
+	/* Switch from pen down to data */
+	dev_dbg(wm831x->dev, "IRQ PD->DATA\n");
+	schedule_work(&wm831x_ts->pd_data_work);
+
+	return IRQ_HANDLED;
+}
+
+static int wm831x_ts_input_open(struct input_dev *idev)
+{
+	struct wm831x_ts *wm831x_ts = input_get_drvdata(idev);
+	struct wm831x *wm831x = wm831x_ts->wm831x;
+
+	wm831x_set_bits(wm831x, WM831X_TOUCH_CONTROL_1,
+			WM831X_TCH_ENA | WM831X_TCH_CVT_ENA |
+			WM831X_TCH_X_ENA | WM831X_TCH_Y_ENA |
+			WM831X_TCH_Z_ENA, WM831X_TCH_ENA);
+
+	wm831x_set_bits(wm831x, WM831X_TOUCH_CONTROL_1,
+			WM831X_TCH_CVT_ENA, WM831X_TCH_CVT_ENA);
+
+	return 0;
+}
+
+static void wm831x_ts_input_close(struct input_dev *idev)
+{
+	struct wm831x_ts *wm831x_ts = input_get_drvdata(idev);
+	struct wm831x *wm831x = wm831x_ts->wm831x;
+
+	/* Shut the controller down, disabling all other functionality too */
+	wm831x_set_bits(wm831x, WM831X_TOUCH_CONTROL_1,
+			WM831X_TCH_ENA | WM831X_TCH_X_ENA |
+			WM831X_TCH_Y_ENA | WM831X_TCH_Z_ENA, 0);
+
+	/* Make sure any pending IRQs are done, the above will prevent
+	 * new ones firing.
+	 */
+	synchronize_irq(wm831x_ts->data_irq);
+	synchronize_irq(wm831x_ts->pd_irq);
+
+	/* Make sure the IRQ completion work is quiesced */
+	flush_work(&wm831x_ts->pd_data_work);
+
+	/* If we ended up with the pen down then make sure we revert back
+	 * to pen detection state for the next time we start up.
+	 */
+	if (wm831x_ts->pen_down) {
+		disable_irq(wm831x_ts->data_irq);
+		enable_irq(wm831x_ts->pd_irq);
+		wm831x_ts->pen_down = false;
+	}
+}
+
+static int wm831x_ts_probe(struct platform_device *pdev)
+{
+	struct wm831x_ts *wm831x_ts;
+	struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+	struct wm831x_pdata *core_pdata = dev_get_platdata(pdev->dev.parent);
+	struct wm831x_touch_pdata *pdata = NULL;
+	struct input_dev *input_dev;
+	int error, irqf;
+
+	if (core_pdata)
+		pdata = core_pdata->touch;
+
+	wm831x_ts = devm_kzalloc(&pdev->dev, sizeof(struct wm831x_ts),
+				 GFP_KERNEL);
+	input_dev = devm_input_allocate_device(&pdev->dev);
+	if (!wm831x_ts || !input_dev) {
+		error = -ENOMEM;
+		goto err_alloc;
+	}
+
+	wm831x_ts->wm831x = wm831x;
+	wm831x_ts->input_dev = input_dev;
+	INIT_WORK(&wm831x_ts->pd_data_work, wm831x_pd_data_work);
+
+	/*
+	 * If we have a direct IRQ use it, otherwise use the interrupt
+	 * from the WM831x IRQ controller.
+	 */
+	wm831x_ts->data_irq = wm831x_irq(wm831x,
+					 platform_get_irq_byname(pdev,
+								 "TCHDATA"));
+	if (pdata && pdata->data_irq)
+		wm831x_ts->data_irq = pdata->data_irq;
+
+	wm831x_ts->pd_irq = wm831x_irq(wm831x,
+				       platform_get_irq_byname(pdev, "TCHPD"));
+	if (pdata && pdata->pd_irq)
+		wm831x_ts->pd_irq = pdata->pd_irq;
+
+	if (pdata)
+		wm831x_ts->pressure = pdata->pressure;
+	else
+		wm831x_ts->pressure = true;
+
+	/* Five wire touchscreens can't report pressure */
+	if (pdata && pdata->fivewire) {
+		wm831x_set_bits(wm831x, WM831X_TOUCH_CONTROL_2,
+				WM831X_TCH_5WIRE, WM831X_TCH_5WIRE);
+
+		/* Pressure measurements are not possible for five wire mode */
+		WARN_ON(pdata->pressure && pdata->fivewire);
+		wm831x_ts->pressure = false;
+	} else {
+		wm831x_set_bits(wm831x, WM831X_TOUCH_CONTROL_2,
+				WM831X_TCH_5WIRE, 0);
+	}
+
+	if (pdata) {
+		switch (pdata->isel) {
+		default:
+			dev_err(&pdev->dev, "Unsupported ISEL setting: %d\n",
+				pdata->isel);
+			fallthrough;
+		case 200:
+		case 0:
+			wm831x_set_bits(wm831x, WM831X_TOUCH_CONTROL_2,
+					WM831X_TCH_ISEL, 0);
+			break;
+		case 400:
+			wm831x_set_bits(wm831x, WM831X_TOUCH_CONTROL_2,
+					WM831X_TCH_ISEL, WM831X_TCH_ISEL);
+			break;
+		}
+	}
+
+	wm831x_set_bits(wm831x, WM831X_TOUCH_CONTROL_2,
+			WM831X_TCH_PDONLY, 0);
+
+	/* Default to 96 samples/sec */
+	wm831x_set_bits(wm831x, WM831X_TOUCH_CONTROL_1,
+			WM831X_TCH_RATE_MASK, 6);
+
+	if (pdata && pdata->data_irqf)
+		irqf = pdata->data_irqf;
+	else
+		irqf = IRQF_TRIGGER_HIGH;
+
+	error = request_threaded_irq(wm831x_ts->data_irq,
+				     NULL, wm831x_ts_data_irq,
+				     irqf | IRQF_ONESHOT,
+				     "Touchscreen data", wm831x_ts);
+	if (error) {
+		dev_err(&pdev->dev, "Failed to request data IRQ %d: %d\n",
+			wm831x_ts->data_irq, error);
+		goto err_alloc;
+	}
+	disable_irq(wm831x_ts->data_irq);
+
+	if (pdata && pdata->pd_irqf)
+		irqf = pdata->pd_irqf;
+	else
+		irqf = IRQF_TRIGGER_HIGH;
+
+	error = request_threaded_irq(wm831x_ts->pd_irq,
+				     NULL, wm831x_ts_pen_down_irq,
+				     irqf | IRQF_ONESHOT,
+				     "Touchscreen pen down", wm831x_ts);
+	if (error) {
+		dev_err(&pdev->dev, "Failed to request pen down IRQ %d: %d\n",
+			wm831x_ts->pd_irq, error);
+		goto err_data_irq;
+	}
+
+	/* set up touch configuration */
+	input_dev->name = "WM831x touchscreen";
+	input_dev->phys = "wm831x";
+	input_dev->open = wm831x_ts_input_open;
+	input_dev->close = wm831x_ts_input_close;
+
+	__set_bit(EV_ABS, input_dev->evbit);
+	__set_bit(EV_KEY, input_dev->evbit);
+	__set_bit(BTN_TOUCH, input_dev->keybit);
+
+	input_set_abs_params(input_dev, ABS_X, 0, 4095, 5, 0);
+	input_set_abs_params(input_dev, ABS_Y, 0, 4095, 5, 0);
+	if (wm831x_ts->pressure)
+		input_set_abs_params(input_dev, ABS_PRESSURE, 0, 4095, 5, 0);
+
+	input_set_drvdata(input_dev, wm831x_ts);
+	input_dev->dev.parent = &pdev->dev;
+
+	error = input_register_device(input_dev);
+	if (error)
+		goto err_pd_irq;
+
+	platform_set_drvdata(pdev, wm831x_ts);
+	return 0;
+
+err_pd_irq:
+	free_irq(wm831x_ts->pd_irq, wm831x_ts);
+err_data_irq:
+	free_irq(wm831x_ts->data_irq, wm831x_ts);
+err_alloc:
+
+	return error;
+}
+
+static int wm831x_ts_remove(struct platform_device *pdev)
+{
+	struct wm831x_ts *wm831x_ts = platform_get_drvdata(pdev);
+
+	free_irq(wm831x_ts->pd_irq, wm831x_ts);
+	free_irq(wm831x_ts->data_irq, wm831x_ts);
+
+	return 0;
+}
+
+static struct platform_driver wm831x_ts_driver = {
+	.driver = {
+		.name = "wm831x-touch",
+	},
+	.probe = wm831x_ts_probe,
+	.remove = wm831x_ts_remove,
+};
+module_platform_driver(wm831x_ts_driver);
+
+/* Module information */
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("WM831x PMIC touchscreen driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm831x-touch");