Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1960 insertions, 0 deletions

diff --git a/drivers/media/i2c/saa7115.c b/drivers/media/i2c/saa7115.c
new file mode 100644
index 000000000..88dc6baac
--- /dev/null
+++ b/drivers/media/i2c/saa7115.c
@@ -0,0 +1,1960 @@
+// SPDX-License-Identifier: GPL-2.0+
+// saa711x - Philips SAA711x video decoder driver
+// This driver can work with saa7111, saa7111a, saa7113, saa7114,
+//			     saa7115 and saa7118.
+//
+// Based on saa7114 driver by Maxim Yevtyushkin, which is based on
+// the saa7111 driver by Dave Perks.
+//
+// Copyright (C) 1998 Dave Perks <dperks@ibm.net>
+// Copyright (C) 2002 Maxim Yevtyushkin <max@linuxmedialabs.com>
+//
+// Slight changes for video timing and attachment output by
+// Wolfgang Scherr <scherr@net4you.net>
+//
+// Moved over to the linux >= 2.4.x i2c protocol (1/1/2003)
+// by Ronald Bultje <rbultje@ronald.bitfreak.net>
+//
+// Added saa7115 support by Kevin Thayer <nufan_wfk at yahoo.com>
+// (2/17/2003)
+//
+// VBI support (2004) and cleanups (2005) by Hans Verkuil <hverkuil@xs4all.nl>
+//
+// Copyright (c) 2005-2006 Mauro Carvalho Chehab <mchehab@kernel.org>
+//	SAA7111, SAA7113 and SAA7118 support
+
+#include "saa711x_regs.h"
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-mc.h>
+#include <media/i2c/saa7115.h>
+#include <asm/div64.h>
+
+#define VRES_60HZ	(480+16)
+
+MODULE_DESCRIPTION("Philips SAA7111/SAA7113/SAA7114/SAA7115/SAA7118 video decoder driver");
+MODULE_AUTHOR(  "Maxim Yevtyushkin, Kevin Thayer, Chris Kennedy, "
+		"Hans Verkuil, Mauro Carvalho Chehab");
+MODULE_LICENSE("GPL");
+
+static bool debug;
+module_param(debug, bool, 0644);
+
+MODULE_PARM_DESC(debug, "Debug level (0-1)");
+
+
+enum saa711x_model {
+	SAA7111A,
+	SAA7111,
+	SAA7113,
+	GM7113C,
+	SAA7114,
+	SAA7115,
+	SAA7118,
+};
+
+enum saa711x_pads {
+	SAA711X_PAD_IF_INPUT,
+	SAA711X_PAD_VID_OUT,
+	SAA711X_NUM_PADS
+};
+
+struct saa711x_state {
+	struct v4l2_subdev sd;
+#ifdef CONFIG_MEDIA_CONTROLLER
+	struct media_pad pads[SAA711X_NUM_PADS];
+#endif
+	struct v4l2_ctrl_handler hdl;
+
+	struct {
+		/* chroma gain control cluster */
+		struct v4l2_ctrl *agc;
+		struct v4l2_ctrl *gain;
+	};
+
+	v4l2_std_id std;
+	int input;
+	int output;
+	int enable;
+	int radio;
+	int width;
+	int height;
+	enum saa711x_model ident;
+	u32 audclk_freq;
+	u32 crystal_freq;
+	bool ucgc;
+	u8 cgcdiv;
+	bool apll;
+	bool double_asclk;
+};
+
+static inline struct saa711x_state *to_state(struct v4l2_subdev *sd)
+{
+	return container_of(sd, struct saa711x_state, sd);
+}
+
+static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
+{
+	return &container_of(ctrl->handler, struct saa711x_state, hdl)->sd;
+}
+
+/* ----------------------------------------------------------------------- */
+
+static inline int saa711x_write(struct v4l2_subdev *sd, u8 reg, u8 value)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+	return i2c_smbus_write_byte_data(client, reg, value);
+}
+
+/* Sanity routine to check if a register is present */
+static int saa711x_has_reg(const int id, const u8 reg)
+{
+	if (id == SAA7111)
+		return reg < 0x20 && reg != 0x01 && reg != 0x0f &&
+		       (reg < 0x13 || reg > 0x19) && reg != 0x1d && reg != 0x1e;
+	if (id == SAA7111A)
+		return reg < 0x20 && reg != 0x01 && reg != 0x0f &&
+		       reg != 0x14 && reg != 0x18 && reg != 0x19 &&
+		       reg != 0x1d && reg != 0x1e;
+
+	/* common for saa7113/4/5/8 */
+	if (unlikely((reg >= 0x3b && reg <= 0x3f) || reg == 0x5c || reg == 0x5f ||
+	    reg == 0xa3 || reg == 0xa7 || reg == 0xab || reg == 0xaf || (reg >= 0xb5 && reg <= 0xb7) ||
+	    reg == 0xd3 || reg == 0xd7 || reg == 0xdb || reg == 0xdf || (reg >= 0xe5 && reg <= 0xe7) ||
+	    reg == 0x82 || (reg >= 0x89 && reg <= 0x8e)))
+		return 0;
+
+	switch (id) {
+	case GM7113C:
+		return reg != 0x14 && (reg < 0x18 || reg > 0x1e) && reg < 0x20;
+	case SAA7113:
+		return reg != 0x14 && (reg < 0x18 || reg > 0x1e) && (reg < 0x20 || reg > 0x3f) &&
+		       reg != 0x5d && reg < 0x63;
+	case SAA7114:
+		return (reg < 0x1a || reg > 0x1e) && (reg < 0x20 || reg > 0x2f) &&
+		       (reg < 0x63 || reg > 0x7f) && reg != 0x33 && reg != 0x37 &&
+		       reg != 0x81 && reg < 0xf0;
+	case SAA7115:
+		return (reg < 0x20 || reg > 0x2f) && reg != 0x65 && (reg < 0xfc || reg > 0xfe);
+	case SAA7118:
+		return (reg < 0x1a || reg > 0x1d) && (reg < 0x20 || reg > 0x22) &&
+		       (reg < 0x26 || reg > 0x28) && reg != 0x33 && reg != 0x37 &&
+		       (reg < 0x63 || reg > 0x7f) && reg != 0x81 && reg < 0xf0;
+	}
+	return 1;
+}
+
+static int saa711x_writeregs(struct v4l2_subdev *sd, const unsigned char *regs)
+{
+	struct saa711x_state *state = to_state(sd);
+	unsigned char reg, data;
+
+	while (*regs != 0x00) {
+		reg = *(regs++);
+		data = *(regs++);
+
+		/* According with datasheets, reserved regs should be
+		   filled with 0 - seems better not to touch on they */
+		if (saa711x_has_reg(state->ident, reg)) {
+			if (saa711x_write(sd, reg, data) < 0)
+				return -1;
+		} else {
+			v4l2_dbg(1, debug, sd, "tried to access reserved reg 0x%02x\n", reg);
+		}
+	}
+	return 0;
+}
+
+static inline int saa711x_read(struct v4l2_subdev *sd, u8 reg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+	return i2c_smbus_read_byte_data(client, reg);
+}
+
+/* ----------------------------------------------------------------------- */
+
+/* SAA7111 initialization table */
+static const unsigned char saa7111_init[] = {
+	R_01_INC_DELAY, 0x00,		/* reserved */
+
+	/*front end */
+	R_02_INPUT_CNTL_1, 0xd0,	/* FUSE=3, GUDL=2, MODE=0 */
+	R_03_INPUT_CNTL_2, 0x23,	/* HLNRS=0, VBSL=1, WPOFF=0, HOLDG=0,
+					 * GAFIX=0, GAI1=256, GAI2=256 */
+	R_04_INPUT_CNTL_3, 0x00,	/* GAI1=256 */
+	R_05_INPUT_CNTL_4, 0x00,	/* GAI2=256 */
+
+	/* decoder */
+	R_06_H_SYNC_START, 0xf3,	/* HSB at  13(50Hz) /  17(60Hz)
+					 * pixels after end of last line */
+	R_07_H_SYNC_STOP, 0xe8,		/* HSS seems to be needed to
+					 * work with NTSC, too */
+	R_08_SYNC_CNTL, 0xc8,		/* AUFD=1, FSEL=1, EXFIL=0,
+					 * VTRC=1, HPLL=0, VNOI=0 */
+	R_09_LUMA_CNTL, 0x01,		/* BYPS=0, PREF=0, BPSS=0,
+					 * VBLB=0, UPTCV=0, APER=1 */
+	R_0A_LUMA_BRIGHT_CNTL, 0x80,
+	R_0B_LUMA_CONTRAST_CNTL, 0x47,	/* 0b - CONT=1.109 */
+	R_0C_CHROMA_SAT_CNTL, 0x40,
+	R_0D_CHROMA_HUE_CNTL, 0x00,
+	R_0E_CHROMA_CNTL_1, 0x01,	/* 0e - CDTO=0, CSTD=0, DCCF=0,
+					 * FCTC=0, CHBW=1 */
+	R_0F_CHROMA_GAIN_CNTL, 0x00,	/* reserved */
+	R_10_CHROMA_CNTL_2, 0x48,	/* 10 - OFTS=1, HDEL=0, VRLN=1, YDEL=0 */
+	R_11_MODE_DELAY_CNTL, 0x1c,	/* 11 - GPSW=0, CM99=0, FECO=0, COMPO=1,
+					 * OEYC=1, OEHV=1, VIPB=0, COLO=0 */
+	R_12_RT_SIGNAL_CNTL, 0x00,	/* 12 - output control 2 */
+	R_13_RT_X_PORT_OUT_CNTL, 0x00,	/* 13 - output control 3 */
+	R_14_ANAL_ADC_COMPAT_CNTL, 0x00,
+	R_15_VGATE_START_FID_CHG, 0x00,
+	R_16_VGATE_STOP, 0x00,
+	R_17_MISC_VGATE_CONF_AND_MSB, 0x00,
+
+	0x00, 0x00
+};
+
+/*
+ * This table has one illegal value, and some values that are not
+ * correct according to the datasheet initialization table.
+ *
+ *  If you need a table with legal/default values tell the driver in
+ *  i2c_board_info.platform_data, and you will get the gm7113c_init
+ *  table instead.
+ */
+
+/* SAA7113 Init codes */
+static const unsigned char saa7113_init[] = {
+	R_01_INC_DELAY, 0x08,
+	R_02_INPUT_CNTL_1, 0xc2,
+	R_03_INPUT_CNTL_2, 0x30,
+	R_04_INPUT_CNTL_3, 0x00,
+	R_05_INPUT_CNTL_4, 0x00,
+	R_06_H_SYNC_START, 0x89,	/* Illegal value -119,
+					 * min. value = -108 (0x94) */
+	R_07_H_SYNC_STOP, 0x0d,
+	R_08_SYNC_CNTL, 0x88,		/* Not datasheet default.
+					 * HTC = VTR mode, should be 0x98 */
+	R_09_LUMA_CNTL, 0x01,
+	R_0A_LUMA_BRIGHT_CNTL, 0x80,
+	R_0B_LUMA_CONTRAST_CNTL, 0x47,
+	R_0C_CHROMA_SAT_CNTL, 0x40,
+	R_0D_CHROMA_HUE_CNTL, 0x00,
+	R_0E_CHROMA_CNTL_1, 0x01,
+	R_0F_CHROMA_GAIN_CNTL, 0x2a,
+	R_10_CHROMA_CNTL_2, 0x08,	/* Not datsheet default.
+					 * VRLN enabled, should be 0x00 */
+	R_11_MODE_DELAY_CNTL, 0x0c,
+	R_12_RT_SIGNAL_CNTL, 0x07,	/* Not datasheet default,
+					 * should be 0x01 */
+	R_13_RT_X_PORT_OUT_CNTL, 0x00,
+	R_14_ANAL_ADC_COMPAT_CNTL, 0x00,
+	R_15_VGATE_START_FID_CHG, 0x00,
+	R_16_VGATE_STOP, 0x00,
+	R_17_MISC_VGATE_CONF_AND_MSB, 0x00,
+
+	0x00, 0x00
+};
+
+/*
+ * GM7113C is a clone of the SAA7113 chip
+ *  This init table is copied out of the saa7113 datasheet.
+ *  In R_08 we enable "Automatic Field Detection" [AUFD],
+ *  this is disabled when saa711x_set_v4lstd is called.
+ */
+static const unsigned char gm7113c_init[] = {
+	R_01_INC_DELAY, 0x08,
+	R_02_INPUT_CNTL_1, 0xc0,
+	R_03_INPUT_CNTL_2, 0x33,
+	R_04_INPUT_CNTL_3, 0x00,
+	R_05_INPUT_CNTL_4, 0x00,
+	R_06_H_SYNC_START, 0xe9,
+	R_07_H_SYNC_STOP, 0x0d,
+	R_08_SYNC_CNTL, 0x98,
+	R_09_LUMA_CNTL, 0x01,
+	R_0A_LUMA_BRIGHT_CNTL, 0x80,
+	R_0B_LUMA_CONTRAST_CNTL, 0x47,
+	R_0C_CHROMA_SAT_CNTL, 0x40,
+	R_0D_CHROMA_HUE_CNTL, 0x00,
+	R_0E_CHROMA_CNTL_1, 0x01,
+	R_0F_CHROMA_GAIN_CNTL, 0x2a,
+	R_10_CHROMA_CNTL_2, 0x00,
+	R_11_MODE_DELAY_CNTL, 0x0c,
+	R_12_RT_SIGNAL_CNTL, 0x01,
+	R_13_RT_X_PORT_OUT_CNTL, 0x00,
+	R_14_ANAL_ADC_COMPAT_CNTL, 0x00,
+	R_15_VGATE_START_FID_CHG, 0x00,
+	R_16_VGATE_STOP, 0x00,
+	R_17_MISC_VGATE_CONF_AND_MSB, 0x00,
+
+	0x00, 0x00
+};
+
+/* If a value differs from the Hauppauge driver values, then the comment starts with
+   'was 0xXX' to denote the Hauppauge value. Otherwise the value is identical to what the
+   Hauppauge driver sets. */
+
+/* SAA7114 and SAA7115 initialization table */
+static const unsigned char saa7115_init_auto_input[] = {
+		/* Front-End Part */
+	R_01_INC_DELAY, 0x48,			/* white peak control disabled */
+	R_03_INPUT_CNTL_2, 0x20,		/* was 0x30. 0x20: long vertical blanking */
+	R_04_INPUT_CNTL_3, 0x90,		/* analog gain set to 0 */
+	R_05_INPUT_CNTL_4, 0x90,		/* analog gain set to 0 */
+		/* Decoder Part */
+	R_06_H_SYNC_START, 0xeb,		/* horiz sync begin = -21 */
+	R_07_H_SYNC_STOP, 0xe0,			/* horiz sync stop = -17 */
+	R_09_LUMA_CNTL, 0x53,			/* 0x53, was 0x56 for 60hz. luminance control */
+	R_0A_LUMA_BRIGHT_CNTL, 0x80,		/* was 0x88. decoder brightness, 0x80 is itu standard */
+	R_0B_LUMA_CONTRAST_CNTL, 0x44,		/* was 0x48. decoder contrast, 0x44 is itu standard */
+	R_0C_CHROMA_SAT_CNTL, 0x40,		/* was 0x47. decoder saturation, 0x40 is itu standard */
+	R_0D_CHROMA_HUE_CNTL, 0x00,
+	R_0F_CHROMA_GAIN_CNTL, 0x00,		/* use automatic gain  */
+	R_10_CHROMA_CNTL_2, 0x06,		/* chroma: active adaptive combfilter */
+	R_11_MODE_DELAY_CNTL, 0x00,
+	R_12_RT_SIGNAL_CNTL, 0x9d,		/* RTS0 output control: VGATE */
+	R_13_RT_X_PORT_OUT_CNTL, 0x80,		/* ITU656 standard mode, RTCO output enable RTCE */
+	R_14_ANAL_ADC_COMPAT_CNTL, 0x00,
+	R_18_RAW_DATA_GAIN_CNTL, 0x40,		/* gain 0x00 = nominal */
+	R_19_RAW_DATA_OFF_CNTL, 0x80,
+	R_1A_COLOR_KILL_LVL_CNTL, 0x77,		/* recommended value */
+	R_1B_MISC_TVVCRDET, 0x42,		/* recommended value */
+	R_1C_ENHAN_COMB_CTRL1, 0xa9,		/* recommended value */
+	R_1D_ENHAN_COMB_CTRL2, 0x01,		/* recommended value */
+
+
+	R_80_GLOBAL_CNTL_1, 0x0,		/* No tasks enabled at init */
+
+		/* Power Device Control */
+	R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0,	/* reset device */
+	R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0,	/* set device programmed, all in operational mode */
+	0x00, 0x00
+};
+
+/* Used to reset saa7113, saa7114 and saa7115 */
+static const unsigned char saa7115_cfg_reset_scaler[] = {
+	R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x00,	/* disable I-port output */
+	R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0,		/* reset scaler */
+	R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0,		/* activate scaler */
+	R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x01,	/* enable I-port output */
+	0x00, 0x00
+};
+
+/* ============== SAA7715 VIDEO templates =============  */
+
+static const unsigned char saa7115_cfg_60hz_video[] = {
+	R_80_GLOBAL_CNTL_1, 0x00,			/* reset tasks */
+	R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0,		/* reset scaler */
+
+	R_15_VGATE_START_FID_CHG, 0x03,
+	R_16_VGATE_STOP, 0x11,
+	R_17_MISC_VGATE_CONF_AND_MSB, 0x9c,
+
+	R_08_SYNC_CNTL, 0x68,			/* 0xBO: auto detection, 0x68 = NTSC */
+	R_0E_CHROMA_CNTL_1, 0x07,		/* video autodetection is on */
+
+	R_5A_V_OFF_FOR_SLICER, 0x06,		/* standard 60hz value for ITU656 line counting */
+
+	/* Task A */
+	R_90_A_TASK_HANDLING_CNTL, 0x80,
+	R_91_A_X_PORT_FORMATS_AND_CONF, 0x48,
+	R_92_A_X_PORT_INPUT_REFERENCE_SIGNAL, 0x40,
+	R_93_A_I_PORT_OUTPUT_FORMATS_AND_CONF, 0x84,
+
+	/* hoffset low (input), 0x0002 is minimum */
+	R_94_A_HORIZ_INPUT_WINDOW_START, 0x01,
+	R_95_A_HORIZ_INPUT_WINDOW_START_MSB, 0x00,
+
+	/* hsize low (input), 0x02d0 = 720 */
+	R_96_A_HORIZ_INPUT_WINDOW_LENGTH, 0xd0,
+	R_97_A_HORIZ_INPUT_WINDOW_LENGTH_MSB, 0x02,
+
+	R_98_A_VERT_INPUT_WINDOW_START, 0x05,
+	R_99_A_VERT_INPUT_WINDOW_START_MSB, 0x00,
+
+	R_9A_A_VERT_INPUT_WINDOW_LENGTH, 0x0c,
+	R_9B_A_VERT_INPUT_WINDOW_LENGTH_MSB, 0x00,
+
+	R_9C_A_HORIZ_OUTPUT_WINDOW_LENGTH, 0xa0,
+	R_9D_A_HORIZ_OUTPUT_WINDOW_LENGTH_MSB, 0x05,
+
+	R_9E_A_VERT_OUTPUT_WINDOW_LENGTH, 0x0c,
+	R_9F_A_VERT_OUTPUT_WINDOW_LENGTH_MSB, 0x00,
+
+	/* Task B */
+	R_C0_B_TASK_HANDLING_CNTL, 0x00,
+	R_C1_B_X_PORT_FORMATS_AND_CONF, 0x08,
+	R_C2_B_INPUT_REFERENCE_SIGNAL_DEFINITION, 0x00,
+	R_C3_B_I_PORT_FORMATS_AND_CONF, 0x80,
+
+	/* 0x0002 is minimum */
+	R_C4_B_HORIZ_INPUT_WINDOW_START, 0x02,
+	R_C5_B_HORIZ_INPUT_WINDOW_START_MSB, 0x00,
+
+	/* 0x02d0 = 720 */
+	R_C6_B_HORIZ_INPUT_WINDOW_LENGTH, 0xd0,
+	R_C7_B_HORIZ_INPUT_WINDOW_LENGTH_MSB, 0x02,
+
+	/* vwindow start 0x12 = 18 */
+	R_C8_B_VERT_INPUT_WINDOW_START, 0x12,
+	R_C9_B_VERT_INPUT_WINDOW_START_MSB, 0x00,
+
+	/* vwindow length 0xf8 = 248 */
+	R_CA_B_VERT_INPUT_WINDOW_LENGTH, VRES_60HZ>>1,
+	R_CB_B_VERT_INPUT_WINDOW_LENGTH_MSB, VRES_60HZ>>9,
+
+	/* hwindow 0x02d0 = 720 */
+	R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH, 0xd0,
+	R_CD_B_HORIZ_OUTPUT_WINDOW_LENGTH_MSB, 0x02,
+
+	R_F0_LFCO_PER_LINE, 0xad,		/* Set PLL Register. 60hz 525 lines per frame, 27 MHz */
+	R_F1_P_I_PARAM_SELECT, 0x05,		/* low bit with 0xF0 */
+	R_F5_PULSGEN_LINE_LENGTH, 0xad,
+	R_F6_PULSE_A_POS_LSB_AND_PULSEGEN_CONFIG, 0x01,
+
+	0x00, 0x00
+};
+
+static const unsigned char saa7115_cfg_50hz_video[] = {
+	R_80_GLOBAL_CNTL_1, 0x00,
+	R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0,	/* reset scaler */
+
+	R_15_VGATE_START_FID_CHG, 0x37,		/* VGATE start */
+	R_16_VGATE_STOP, 0x16,
+	R_17_MISC_VGATE_CONF_AND_MSB, 0x99,
+
+	R_08_SYNC_CNTL, 0x28,			/* 0x28 = PAL */
+	R_0E_CHROMA_CNTL_1, 0x07,
+
+	R_5A_V_OFF_FOR_SLICER, 0x03,		/* standard 50hz value */
+
+	/* Task A */
+	R_90_A_TASK_HANDLING_CNTL, 0x81,
+	R_91_A_X_PORT_FORMATS_AND_CONF, 0x48,
+	R_92_A_X_PORT_INPUT_REFERENCE_SIGNAL, 0x40,
+	R_93_A_I_PORT_OUTPUT_FORMATS_AND_CONF, 0x84,
+
+	/* This is weird: the datasheet says that you should use 2 as the minimum value, */
+	/* but Hauppauge uses 0, and changing that to 2 causes indeed problems (for 50hz) */
+	/* hoffset low (input), 0x0002 is minimum */
+	R_94_A_HORIZ_INPUT_WINDOW_START, 0x00,
+	R_95_A_HORIZ_INPUT_WINDOW_START_MSB, 0x00,
+
+	/* hsize low (input), 0x02d0 = 720 */
+	R_96_A_HORIZ_INPUT_WINDOW_LENGTH, 0xd0,
+	R_97_A_HORIZ_INPUT_WINDOW_LENGTH_MSB, 0x02,
+
+	R_98_A_VERT_INPUT_WINDOW_START, 0x03,
+	R_99_A_VERT_INPUT_WINDOW_START_MSB, 0x00,
+
+	/* vsize 0x12 = 18 */
+	R_9A_A_VERT_INPUT_WINDOW_LENGTH, 0x12,
+	R_9B_A_VERT_INPUT_WINDOW_LENGTH_MSB, 0x00,
+
+	/* hsize 0x05a0 = 1440 */
+	R_9C_A_HORIZ_OUTPUT_WINDOW_LENGTH, 0xa0,
+	R_9D_A_HORIZ_OUTPUT_WINDOW_LENGTH_MSB, 0x05,	/* hsize hi (output) */
+	R_9E_A_VERT_OUTPUT_WINDOW_LENGTH, 0x12,		/* vsize low (output), 0x12 = 18 */
+	R_9F_A_VERT_OUTPUT_WINDOW_LENGTH_MSB, 0x00,	/* vsize hi (output) */
+
+	/* Task B */
+	R_C0_B_TASK_HANDLING_CNTL, 0x00,
+	R_C1_B_X_PORT_FORMATS_AND_CONF, 0x08,
+	R_C2_B_INPUT_REFERENCE_SIGNAL_DEFINITION, 0x00,
+	R_C3_B_I_PORT_FORMATS_AND_CONF, 0x80,
+
+	/* This is weird: the datasheet says that you should use 2 as the minimum value, */
+	/* but Hauppauge uses 0, and changing that to 2 causes indeed problems (for 50hz) */
+	/* hoffset low (input), 0x0002 is minimum. See comment above. */
+	R_C4_B_HORIZ_INPUT_WINDOW_START, 0x00,
+	R_C5_B_HORIZ_INPUT_WINDOW_START_MSB, 0x00,
+
+	/* hsize 0x02d0 = 720 */
+	R_C6_B_HORIZ_INPUT_WINDOW_LENGTH, 0xd0,
+	R_C7_B_HORIZ_INPUT_WINDOW_LENGTH_MSB, 0x02,
+
+	/* voffset 0x16 = 22 */
+	R_C8_B_VERT_INPUT_WINDOW_START, 0x16,
+	R_C9_B_VERT_INPUT_WINDOW_START_MSB, 0x00,
+
+	/* vsize 0x0120 = 288 */
+	R_CA_B_VERT_INPUT_WINDOW_LENGTH, 0x20,
+	R_CB_B_VERT_INPUT_WINDOW_LENGTH_MSB, 0x01,
+
+	/* hsize 0x02d0 = 720 */
+	R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH, 0xd0,
+	R_CD_B_HORIZ_OUTPUT_WINDOW_LENGTH_MSB, 0x02,
+
+	R_F0_LFCO_PER_LINE, 0xb0,		/* Set PLL Register. 50hz 625 lines per frame, 27 MHz */
+	R_F1_P_I_PARAM_SELECT, 0x05,		/* low bit with 0xF0, (was 0x05) */
+	R_F5_PULSGEN_LINE_LENGTH, 0xb0,
+	R_F6_PULSE_A_POS_LSB_AND_PULSEGEN_CONFIG, 0x01,
+
+	0x00, 0x00
+};
+
+/* ============== SAA7715 VIDEO templates (end) =======  */
+
+static const unsigned char saa7115_cfg_vbi_on[] = {
+	R_80_GLOBAL_CNTL_1, 0x00,			/* reset tasks */
+	R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0,		/* reset scaler */
+	R_80_GLOBAL_CNTL_1, 0x30,			/* Activate both tasks */
+	R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0,		/* activate scaler */
+	R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x01,	/* Enable I-port output */
+
+	0x00, 0x00
+};
+
+static const unsigned char saa7115_cfg_vbi_off[] = {
+	R_80_GLOBAL_CNTL_1, 0x00,			/* reset tasks */
+	R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0,		/* reset scaler */
+	R_80_GLOBAL_CNTL_1, 0x20,			/* Activate only task "B" */
+	R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0,		/* activate scaler */
+	R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x01,	/* Enable I-port output */
+
+	0x00, 0x00
+};
+
+
+static const unsigned char saa7115_init_misc[] = {
+	R_81_V_SYNC_FLD_ID_SRC_SEL_AND_RETIMED_V_F, 0x01,
+	R_83_X_PORT_I_O_ENA_AND_OUT_CLK, 0x01,
+	R_84_I_PORT_SIGNAL_DEF, 0x20,
+	R_85_I_PORT_SIGNAL_POLAR, 0x21,
+	R_86_I_PORT_FIFO_FLAG_CNTL_AND_ARBIT, 0xc5,
+	R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x01,
+
+	/* Task A */
+	R_A0_A_HORIZ_PRESCALING, 0x01,
+	R_A1_A_ACCUMULATION_LENGTH, 0x00,
+	R_A2_A_PRESCALER_DC_GAIN_AND_FIR_PREFILTER, 0x00,
+
+	/* Configure controls at nominal value*/
+	R_A4_A_LUMA_BRIGHTNESS_CNTL, 0x80,
+	R_A5_A_LUMA_CONTRAST_CNTL, 0x40,
+	R_A6_A_CHROMA_SATURATION_CNTL, 0x40,
+
+	/* note: 2 x zoom ensures that VBI lines have same length as video lines. */
+	R_A8_A_HORIZ_LUMA_SCALING_INC, 0x00,
+	R_A9_A_HORIZ_LUMA_SCALING_INC_MSB, 0x02,
+
+	R_AA_A_HORIZ_LUMA_PHASE_OFF, 0x00,
+
+	/* must be horiz lum scaling / 2 */
+	R_AC_A_HORIZ_CHROMA_SCALING_INC, 0x00,
+	R_AD_A_HORIZ_CHROMA_SCALING_INC_MSB, 0x01,
+
+	/* must be offset luma / 2 */
+	R_AE_A_HORIZ_CHROMA_PHASE_OFF, 0x00,
+
+	R_B0_A_VERT_LUMA_SCALING_INC, 0x00,
+	R_B1_A_VERT_LUMA_SCALING_INC_MSB, 0x04,
+
+	R_B2_A_VERT_CHROMA_SCALING_INC, 0x00,
+	R_B3_A_VERT_CHROMA_SCALING_INC_MSB, 0x04,
+
+	R_B4_A_VERT_SCALING_MODE_CNTL, 0x01,
+
+	R_B8_A_VERT_CHROMA_PHASE_OFF_00, 0x00,
+	R_B9_A_VERT_CHROMA_PHASE_OFF_01, 0x00,
+	R_BA_A_VERT_CHROMA_PHASE_OFF_10, 0x00,
+	R_BB_A_VERT_CHROMA_PHASE_OFF_11, 0x00,
+
+	R_BC_A_VERT_LUMA_PHASE_OFF_00, 0x00,
+	R_BD_A_VERT_LUMA_PHASE_OFF_01, 0x00,
+	R_BE_A_VERT_LUMA_PHASE_OFF_10, 0x00,
+	R_BF_A_VERT_LUMA_PHASE_OFF_11, 0x00,
+
+	/* Task B */
+	R_D0_B_HORIZ_PRESCALING, 0x01,
+	R_D1_B_ACCUMULATION_LENGTH, 0x00,
+	R_D2_B_PRESCALER_DC_GAIN_AND_FIR_PREFILTER, 0x00,
+
+	/* Configure controls at nominal value*/
+	R_D4_B_LUMA_BRIGHTNESS_CNTL, 0x80,
+	R_D5_B_LUMA_CONTRAST_CNTL, 0x40,
+	R_D6_B_CHROMA_SATURATION_CNTL, 0x40,
+
+	/* hor lum scaling 0x0400 = 1 */
+	R_D8_B_HORIZ_LUMA_SCALING_INC, 0x00,
+	R_D9_B_HORIZ_LUMA_SCALING_INC_MSB, 0x04,
+
+	R_DA_B_HORIZ_LUMA_PHASE_OFF, 0x00,
+
+	/* must be hor lum scaling / 2 */
+	R_DC_B_HORIZ_CHROMA_SCALING, 0x00,
+	R_DD_B_HORIZ_CHROMA_SCALING_MSB, 0x02,
+
+	/* must be offset luma / 2 */
+	R_DE_B_HORIZ_PHASE_OFFSET_CRHOMA, 0x00,
+
+	R_E0_B_VERT_LUMA_SCALING_INC, 0x00,
+	R_E1_B_VERT_LUMA_SCALING_INC_MSB, 0x04,
+
+	R_E2_B_VERT_CHROMA_SCALING_INC, 0x00,
+	R_E3_B_VERT_CHROMA_SCALING_INC_MSB, 0x04,
+
+	R_E4_B_VERT_SCALING_MODE_CNTL, 0x01,
+
+	R_E8_B_VERT_CHROMA_PHASE_OFF_00, 0x00,
+	R_E9_B_VERT_CHROMA_PHASE_OFF_01, 0x00,
+	R_EA_B_VERT_CHROMA_PHASE_OFF_10, 0x00,
+	R_EB_B_VERT_CHROMA_PHASE_OFF_11, 0x00,
+
+	R_EC_B_VERT_LUMA_PHASE_OFF_00, 0x00,
+	R_ED_B_VERT_LUMA_PHASE_OFF_01, 0x00,
+	R_EE_B_VERT_LUMA_PHASE_OFF_10, 0x00,
+	R_EF_B_VERT_LUMA_PHASE_OFF_11, 0x00,
+
+	R_F2_NOMINAL_PLL2_DTO, 0x50,		/* crystal clock = 24.576 MHz, target = 27MHz */
+	R_F3_PLL_INCREMENT, 0x46,
+	R_F4_PLL2_STATUS, 0x00,
+	R_F7_PULSE_A_POS_MSB, 0x4b,		/* not the recommended settings! */
+	R_F8_PULSE_B_POS, 0x00,
+	R_F9_PULSE_B_POS_MSB, 0x4b,
+	R_FA_PULSE_C_POS, 0x00,
+	R_FB_PULSE_C_POS_MSB, 0x4b,
+
+	/* PLL2 lock detection settings: 71 lines 50% phase error */
+	R_FF_S_PLL_MAX_PHASE_ERR_THRESH_NUM_LINES, 0x88,
+
+	/* Turn off VBI */
+	R_40_SLICER_CNTL_1, 0x20,             /* No framing code errors allowed. */
+	R_41_LCR_BASE, 0xff,
+	R_41_LCR_BASE+1, 0xff,
+	R_41_LCR_BASE+2, 0xff,
+	R_41_LCR_BASE+3, 0xff,
+	R_41_LCR_BASE+4, 0xff,
+	R_41_LCR_BASE+5, 0xff,
+	R_41_LCR_BASE+6, 0xff,
+	R_41_LCR_BASE+7, 0xff,
+	R_41_LCR_BASE+8, 0xff,
+	R_41_LCR_BASE+9, 0xff,
+	R_41_LCR_BASE+10, 0xff,
+	R_41_LCR_BASE+11, 0xff,
+	R_41_LCR_BASE+12, 0xff,
+	R_41_LCR_BASE+13, 0xff,
+	R_41_LCR_BASE+14, 0xff,
+	R_41_LCR_BASE+15, 0xff,
+	R_41_LCR_BASE+16, 0xff,
+	R_41_LCR_BASE+17, 0xff,
+	R_41_LCR_BASE+18, 0xff,
+	R_41_LCR_BASE+19, 0xff,
+	R_41_LCR_BASE+20, 0xff,
+	R_41_LCR_BASE+21, 0xff,
+	R_41_LCR_BASE+22, 0xff,
+	R_58_PROGRAM_FRAMING_CODE, 0x40,
+	R_59_H_OFF_FOR_SLICER, 0x47,
+	R_5B_FLD_OFF_AND_MSB_FOR_H_AND_V_OFF, 0x83,
+	R_5D_DID, 0xbd,
+	R_5E_SDID, 0x35,
+
+	R_02_INPUT_CNTL_1, 0xc4, /* input tuner -> input 4, amplifier active */
+
+	R_80_GLOBAL_CNTL_1, 0x20,		/* enable task B */
+	R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0,
+	R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0,
+	0x00, 0x00
+};
+
+static int saa711x_odd_parity(u8 c)
+{
+	c ^= (c >> 4);
+	c ^= (c >> 2);
+	c ^= (c >> 1);
+
+	return c & 1;
+}
+
+static int saa711x_decode_vps(u8 *dst, u8 *p)
+{
+	static const u8 biphase_tbl[] = {
+		0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4,
+		0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0,
+		0xd2, 0x5a, 0x52, 0xd2, 0x96, 0x1e, 0x16, 0x96,
+		0x92, 0x1a, 0x12, 0x92, 0xd2, 0x5a, 0x52, 0xd2,
+		0xd0, 0x58, 0x50, 0xd0, 0x94, 0x1c, 0x14, 0x94,
+		0x90, 0x18, 0x10, 0x90, 0xd0, 0x58, 0x50, 0xd0,
+		0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4,
+		0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0,
+		0xe1, 0x69, 0x61, 0xe1, 0xa5, 0x2d, 0x25, 0xa5,
+		0xa1, 0x29, 0x21, 0xa1, 0xe1, 0x69, 0x61, 0xe1,
+		0xc3, 0x4b, 0x43, 0xc3, 0x87, 0x0f, 0x07, 0x87,
+		0x83, 0x0b, 0x03, 0x83, 0xc3, 0x4b, 0x43, 0xc3,
+		0xc1, 0x49, 0x41, 0xc1, 0x85, 0x0d, 0x05, 0x85,
+		0x81, 0x09, 0x01, 0x81, 0xc1, 0x49, 0x41, 0xc1,
+		0xe1, 0x69, 0x61, 0xe1, 0xa5, 0x2d, 0x25, 0xa5,
+		0xa1, 0x29, 0x21, 0xa1, 0xe1, 0x69, 0x61, 0xe1,
+		0xe0, 0x68, 0x60, 0xe0, 0xa4, 0x2c, 0x24, 0xa4,
+		0xa0, 0x28, 0x20, 0xa0, 0xe0, 0x68, 0x60, 0xe0,
+		0xc2, 0x4a, 0x42, 0xc2, 0x86, 0x0e, 0x06, 0x86,
+		0x82, 0x0a, 0x02, 0x82, 0xc2, 0x4a, 0x42, 0xc2,
+		0xc0, 0x48, 0x40, 0xc0, 0x84, 0x0c, 0x04, 0x84,
+		0x80, 0x08, 0x00, 0x80, 0xc0, 0x48, 0x40, 0xc0,
+		0xe0, 0x68, 0x60, 0xe0, 0xa4, 0x2c, 0x24, 0xa4,
+		0xa0, 0x28, 0x20, 0xa0, 0xe0, 0x68, 0x60, 0xe0,
+		0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4,
+		0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0,
+		0xd2, 0x5a, 0x52, 0xd2, 0x96, 0x1e, 0x16, 0x96,
+		0x92, 0x1a, 0x12, 0x92, 0xd2, 0x5a, 0x52, 0xd2,
+		0xd0, 0x58, 0x50, 0xd0, 0x94, 0x1c, 0x14, 0x94,
+		0x90, 0x18, 0x10, 0x90, 0xd0, 0x58, 0x50, 0xd0,
+		0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4,
+		0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0,
+	};
+	int i;
+	u8 c, err = 0;
+
+	for (i = 0; i < 2 * 13; i += 2) {
+		err |= biphase_tbl[p[i]] | biphase_tbl[p[i + 1]];
+		c = (biphase_tbl[p[i + 1]] & 0xf) | ((biphase_tbl[p[i]] & 0xf) << 4);
+		dst[i / 2] = c;
+	}
+	return err & 0xf0;
+}
+
+static int saa711x_decode_wss(u8 *p)
+{
+	static const int wss_bits[8] = {
+		0, 0, 0, 1, 0, 1, 1, 1
+	};
+	unsigned char parity;
+	int wss = 0;
+	int i;
+
+	for (i = 0; i < 16; i++) {
+		int b1 = wss_bits[p[i] & 7];
+		int b2 = wss_bits[(p[i] >> 3) & 7];
+
+		if (b1 == b2)
+			return -1;
+		wss |= b2 << i;
+	}
+	parity = wss & 15;
+	parity ^= parity >> 2;
+	parity ^= parity >> 1;
+
+	if (!(parity & 1))
+		return -1;
+
+	return wss;
+}
+
+static int saa711x_s_clock_freq(struct v4l2_subdev *sd, u32 freq)
+{
+	struct saa711x_state *state = to_state(sd);
+	u32 acpf;
+	u32 acni;
+	u32 hz;
+	u64 f;
+	u8 acc = 0;	/* reg 0x3a, audio clock control */
+
+	/* Checks for chips that don't have audio clock (saa7111, saa7113) */
+	if (!saa711x_has_reg(state->ident, R_30_AUD_MAST_CLK_CYCLES_PER_FIELD))
+		return 0;
+
+	v4l2_dbg(1, debug, sd, "set audio clock freq: %d\n", freq);
+
+	/* sanity check */
+	if (freq < 32000 || freq > 48000)
+		return -EINVAL;
+
+	/* hz is the refresh rate times 100 */
+	hz = (state->std & V4L2_STD_525_60) ? 5994 : 5000;
+	/* acpf = (256 * freq) / field_frequency == (256 * 100 * freq) / hz */
+	acpf = (25600 * freq) / hz;
+	/* acni = (256 * freq * 2^23) / crystal_frequency =
+		  (freq * 2^(8+23)) / crystal_frequency =
+		  (freq << 31) / crystal_frequency */
+	f = freq;
+	f = f << 31;
+	do_div(f, state->crystal_freq);
+	acni = f;
+	if (state->ucgc) {
+		acpf = acpf * state->cgcdiv / 16;
+		acni = acni * state->cgcdiv / 16;
+		acc = 0x80;
+		if (state->cgcdiv == 3)
+			acc |= 0x40;
+	}
+	if (state->apll)
+		acc |= 0x08;
+
+	if (state->double_asclk) {
+		acpf <<= 1;
+		acni <<= 1;
+	}
+	saa711x_write(sd, R_38_CLK_RATIO_AMXCLK_TO_ASCLK, 0x03);
+	saa711x_write(sd, R_39_CLK_RATIO_ASCLK_TO_ALRCLK, 0x10 << state->double_asclk);
+	saa711x_write(sd, R_3A_AUD_CLK_GEN_BASIC_SETUP, acc);
+
+	saa711x_write(sd, R_30_AUD_MAST_CLK_CYCLES_PER_FIELD, acpf & 0xff);
+	saa711x_write(sd, R_30_AUD_MAST_CLK_CYCLES_PER_FIELD+1,
+							(acpf >> 8) & 0xff);
+	saa711x_write(sd, R_30_AUD_MAST_CLK_CYCLES_PER_FIELD+2,
+							(acpf >> 16) & 0x03);
+
+	saa711x_write(sd, R_34_AUD_MAST_CLK_NOMINAL_INC, acni & 0xff);
+	saa711x_write(sd, R_34_AUD_MAST_CLK_NOMINAL_INC+1, (acni >> 8) & 0xff);
+	saa711x_write(sd, R_34_AUD_MAST_CLK_NOMINAL_INC+2, (acni >> 16) & 0x3f);
+	state->audclk_freq = freq;
+	return 0;
+}
+
+static int saa711x_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct v4l2_subdev *sd = to_sd(ctrl);
+	struct saa711x_state *state = to_state(sd);
+
+	switch (ctrl->id) {
+	case V4L2_CID_CHROMA_AGC:
+		/* chroma gain cluster */
+		if (state->agc->val)
+			state->gain->val =
+				saa711x_read(sd, R_0F_CHROMA_GAIN_CNTL) & 0x7f;
+		break;
+	}
+	return 0;
+}
+
+static int saa711x_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct v4l2_subdev *sd = to_sd(ctrl);
+	struct saa711x_state *state = to_state(sd);
+
+	switch (ctrl->id) {
+	case V4L2_CID_BRIGHTNESS:
+		saa711x_write(sd, R_0A_LUMA_BRIGHT_CNTL, ctrl->val);
+		break;
+
+	case V4L2_CID_CONTRAST:
+		saa711x_write(sd, R_0B_LUMA_CONTRAST_CNTL, ctrl->val);
+		break;
+
+	case V4L2_CID_SATURATION:
+		saa711x_write(sd, R_0C_CHROMA_SAT_CNTL, ctrl->val);
+		break;
+
+	case V4L2_CID_HUE:
+		saa711x_write(sd, R_0D_CHROMA_HUE_CNTL, ctrl->val);
+		break;
+
+	case V4L2_CID_CHROMA_AGC:
+		/* chroma gain cluster */
+		if (state->agc->val)
+			saa711x_write(sd, R_0F_CHROMA_GAIN_CNTL, state->gain->val);
+		else
+			saa711x_write(sd, R_0F_CHROMA_GAIN_CNTL, state->gain->val | 0x80);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int saa711x_set_size(struct v4l2_subdev *sd, int width, int height)
+{
+	struct saa711x_state *state = to_state(sd);
+	int HPSC, HFSC;
+	int VSCY;
+	int res;
+	int is_50hz = state->std & V4L2_STD_625_50;
+	int Vsrc = is_50hz ? 576 : 480;
+
+	v4l2_dbg(1, debug, sd, "decoder set size to %ix%i\n", width, height);
+
+	/* FIXME need better bounds checking here */
+	if ((width < 1) || (width > 1440))
+		return -EINVAL;
+	if ((height < 1) || (height > Vsrc))
+		return -EINVAL;
+
+	if (!saa711x_has_reg(state->ident, R_D0_B_HORIZ_PRESCALING)) {
+		/* Decoder only supports 720 columns and 480 or 576 lines */
+		if (width != 720)
+			return -EINVAL;
+		if (height != Vsrc)
+			return -EINVAL;
+	}
+
+	state->width = width;
+	state->height = height;
+
+	if (!saa711x_has_reg(state->ident, R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH))
+		return 0;
+
+	/* probably have a valid size, let's set it */
+	/* Set output width/height */
+	/* width */
+
+	saa711x_write(sd, R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH,
+					(u8) (width & 0xff));
+	saa711x_write(sd, R_CD_B_HORIZ_OUTPUT_WINDOW_LENGTH_MSB,
+					(u8) ((width >> 8) & 0xff));
+
+	/* Vertical Scaling uses height/2 */
+	res = height / 2;
+
+	/* On 60Hz, it is using a higher Vertical Output Size */
+	if (!is_50hz)
+		res += (VRES_60HZ - 480) >> 1;
+
+		/* height */
+	saa711x_write(sd, R_CE_B_VERT_OUTPUT_WINDOW_LENGTH,
+					(u8) (res & 0xff));
+	saa711x_write(sd, R_CF_B_VERT_OUTPUT_WINDOW_LENGTH_MSB,
+					(u8) ((res >> 8) & 0xff));
+
+	/* Scaling settings */
+	/* Hprescaler is floor(inres/outres) */
+	HPSC = (int)(720 / width);
+	/* 0 is not allowed (div. by zero) */
+	HPSC = HPSC ? HPSC : 1;
+	HFSC = (int)((1024 * 720) / (HPSC * width));
+	/* FIXME hardcodes to "Task B"
+	 * write H prescaler integer */
+	saa711x_write(sd, R_D0_B_HORIZ_PRESCALING,
+				(u8) (HPSC & 0x3f));
+
+	v4l2_dbg(1, debug, sd, "Hpsc: 0x%05x, Hfsc: 0x%05x\n", HPSC, HFSC);
+	/* write H fine-scaling (luminance) */
+	saa711x_write(sd, R_D8_B_HORIZ_LUMA_SCALING_INC,
+				(u8) (HFSC & 0xff));
+	saa711x_write(sd, R_D9_B_HORIZ_LUMA_SCALING_INC_MSB,
+				(u8) ((HFSC >> 8) & 0xff));
+	/* write H fine-scaling (chrominance)
+	 * must be lum/2, so i'll just bitshift :) */
+	saa711x_write(sd, R_DC_B_HORIZ_CHROMA_SCALING,
+				(u8) ((HFSC >> 1) & 0xff));
+	saa711x_write(sd, R_DD_B_HORIZ_CHROMA_SCALING_MSB,
+				(u8) ((HFSC >> 9) & 0xff));
+
+	VSCY = (int)((1024 * Vsrc) / height);
+	v4l2_dbg(1, debug, sd, "Vsrc: %d, Vscy: 0x%05x\n", Vsrc, VSCY);
+
+	/* Correct Contrast and Luminance */
+	saa711x_write(sd, R_D5_B_LUMA_CONTRAST_CNTL,
+					(u8) (64 * 1024 / VSCY));
+	saa711x_write(sd, R_D6_B_CHROMA_SATURATION_CNTL,
+					(u8) (64 * 1024 / VSCY));
+
+		/* write V fine-scaling (luminance) */
+	saa711x_write(sd, R_E0_B_VERT_LUMA_SCALING_INC,
+					(u8) (VSCY & 0xff));
+	saa711x_write(sd, R_E1_B_VERT_LUMA_SCALING_INC_MSB,
+					(u8) ((VSCY >> 8) & 0xff));
+		/* write V fine-scaling (chrominance) */
+	saa711x_write(sd, R_E2_B_VERT_CHROMA_SCALING_INC,
+					(u8) (VSCY & 0xff));
+	saa711x_write(sd, R_E3_B_VERT_CHROMA_SCALING_INC_MSB,
+					(u8) ((VSCY >> 8) & 0xff));
+
+	saa711x_writeregs(sd, saa7115_cfg_reset_scaler);
+
+	/* Activates task "B" */
+	saa711x_write(sd, R_80_GLOBAL_CNTL_1,
+				saa711x_read(sd, R_80_GLOBAL_CNTL_1) | 0x20);
+
+	return 0;
+}
+
+static void saa711x_set_v4lstd(struct v4l2_subdev *sd, v4l2_std_id std)
+{
+	struct saa711x_state *state = to_state(sd);
+
+	/* Prevent unnecessary standard changes. During a standard
+	   change the I-Port is temporarily disabled. Any devices
+	   reading from that port can get confused.
+	   Note that s_std is also used to switch from
+	   radio to TV mode, so if a s_std is broadcast to
+	   all I2C devices then you do not want to have an unwanted
+	   side-effect here. */
+	if (std == state->std)
+		return;
+
+	state->std = std;
+
+	// This works for NTSC-M, SECAM-L and the 50Hz PAL variants.
+	if (std & V4L2_STD_525_60) {
+		v4l2_dbg(1, debug, sd, "decoder set standard 60 Hz\n");
+		if (state->ident == GM7113C) {
+			u8 reg = saa711x_read(sd, R_08_SYNC_CNTL);
+			reg &= ~(SAA7113_R_08_FSEL | SAA7113_R_08_AUFD);
+			reg |= SAA7113_R_08_FSEL;
+			saa711x_write(sd, R_08_SYNC_CNTL, reg);
+		} else {
+			saa711x_writeregs(sd, saa7115_cfg_60hz_video);
+		}
+		saa711x_set_size(sd, 720, 480);
+	} else {
+		v4l2_dbg(1, debug, sd, "decoder set standard 50 Hz\n");
+		if (state->ident == GM7113C) {
+			u8 reg = saa711x_read(sd, R_08_SYNC_CNTL);
+			reg &= ~(SAA7113_R_08_FSEL | SAA7113_R_08_AUFD);
+			saa711x_write(sd, R_08_SYNC_CNTL, reg);
+		} else {
+			saa711x_writeregs(sd, saa7115_cfg_50hz_video);
+		}
+		saa711x_set_size(sd, 720, 576);
+	}
+
+	/* Register 0E - Bits D6-D4 on NO-AUTO mode
+		(SAA7111 and SAA7113 doesn't have auto mode)
+	    50 Hz / 625 lines           60 Hz / 525 lines
+	000 PAL BGDHI (4.43Mhz)         NTSC M (3.58MHz)
+	001 NTSC 4.43 (50 Hz)           PAL 4.43 (60 Hz)
+	010 Combination-PAL N (3.58MHz) NTSC 4.43 (60 Hz)
+	011 NTSC N (3.58MHz)            PAL M (3.58MHz)
+	100 reserved                    NTSC-Japan (3.58MHz)
+	*/
+	if (state->ident <= SAA7113 ||
+	    state->ident == GM7113C) {
+		u8 reg = saa711x_read(sd, R_0E_CHROMA_CNTL_1) & 0x8f;
+
+		if (std == V4L2_STD_PAL_M) {
+			reg |= 0x30;
+		} else if (std == V4L2_STD_PAL_Nc) {
+			reg |= 0x20;
+		} else if (std == V4L2_STD_PAL_60) {
+			reg |= 0x10;
+		} else if (std == V4L2_STD_NTSC_M_JP) {
+			reg |= 0x40;
+		} else if (std & V4L2_STD_SECAM) {
+			reg |= 0x50;
+		}
+		saa711x_write(sd, R_0E_CHROMA_CNTL_1, reg);
+	} else {
+		/* restart task B if needed */
+		int taskb = saa711x_read(sd, R_80_GLOBAL_CNTL_1) & 0x10;
+
+		if (taskb && state->ident == SAA7114)
+			saa711x_writeregs(sd, saa7115_cfg_vbi_on);
+
+		/* switch audio mode too! */
+		saa711x_s_clock_freq(sd, state->audclk_freq);
+	}
+}
+
+/* setup the sliced VBI lcr registers according to the sliced VBI format */
+static void saa711x_set_lcr(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *fmt)
+{
+	struct saa711x_state *state = to_state(sd);
+	int is_50hz = (state->std & V4L2_STD_625_50);
+	u8 lcr[24];
+	int i, x;
+
+#if 1
+	/* saa7113/7114/7118 VBI support are experimental */
+	if (!saa711x_has_reg(state->ident, R_41_LCR_BASE))
+		return;
+
+#else
+	/* SAA7113 and SAA7118 also should support VBI - Need testing */
+	if (state->ident != SAA7115)
+		return;
+#endif
+
+	for (i = 0; i <= 23; i++)
+		lcr[i] = 0xff;
+
+	if (fmt == NULL) {
+		/* raw VBI */
+		if (is_50hz)
+			for (i = 6; i <= 23; i++)
+				lcr[i] = 0xdd;
+		else
+			for (i = 10; i <= 21; i++)
+				lcr[i] = 0xdd;
+	} else {
+		/* sliced VBI */
+		/* first clear lines that cannot be captured */
+		if (is_50hz) {
+			for (i = 0; i <= 5; i++)
+				fmt->service_lines[0][i] =
+					fmt->service_lines[1][i] = 0;
+		}
+		else {
+			for (i = 0; i <= 9; i++)
+				fmt->service_lines[0][i] =
+					fmt->service_lines[1][i] = 0;
+			for (i = 22; i <= 23; i++)
+				fmt->service_lines[0][i] =
+					fmt->service_lines[1][i] = 0;
+		}
+
+		/* Now set the lcr values according to the specified service */
+		for (i = 6; i <= 23; i++) {
+			lcr[i] = 0;
+			for (x = 0; x <= 1; x++) {
+				switch (fmt->service_lines[1-x][i]) {
+					case 0:
+						lcr[i] |= 0xf << (4 * x);
+						break;
+					case V4L2_SLICED_TELETEXT_B:
+						lcr[i] |= 1 << (4 * x);
+						break;
+					case V4L2_SLICED_CAPTION_525:
+						lcr[i] |= 4 << (4 * x);
+						break;
+					case V4L2_SLICED_WSS_625:
+						lcr[i] |= 5 << (4 * x);
+						break;
+					case V4L2_SLICED_VPS:
+						lcr[i] |= 7 << (4 * x);
+						break;
+				}
+			}
+		}
+	}
+
+	/* write the lcr registers */
+	for (i = 2; i <= 23; i++) {
+		saa711x_write(sd, i - 2 + R_41_LCR_BASE, lcr[i]);
+	}
+
+	/* enable/disable raw VBI capturing */
+	saa711x_writeregs(sd, fmt == NULL ?
+				saa7115_cfg_vbi_on :
+				saa7115_cfg_vbi_off);
+}
+
+static int saa711x_g_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *sliced)
+{
+	static u16 lcr2vbi[] = {
+		0, V4L2_SLICED_TELETEXT_B, 0,	/* 1 */
+		0, V4L2_SLICED_CAPTION_525,	/* 4 */
+		V4L2_SLICED_WSS_625, 0,		/* 5 */
+		V4L2_SLICED_VPS, 0, 0, 0, 0,	/* 7 */
+		0, 0, 0, 0
+	};
+	int i;
+
+	memset(sliced->service_lines, 0, sizeof(sliced->service_lines));
+	sliced->service_set = 0;
+	/* done if using raw VBI */
+	if (saa711x_read(sd, R_80_GLOBAL_CNTL_1) & 0x10)
+		return 0;
+	for (i = 2; i <= 23; i++) {
+		u8 v = saa711x_read(sd, i - 2 + R_41_LCR_BASE);
+
+		sliced->service_lines[0][i] = lcr2vbi[v >> 4];
+		sliced->service_lines[1][i] = lcr2vbi[v & 0xf];
+		sliced->service_set |=
+			sliced->service_lines[0][i] | sliced->service_lines[1][i];
+	}
+	return 0;
+}
+
+static int saa711x_s_raw_fmt(struct v4l2_subdev *sd, struct v4l2_vbi_format *fmt)
+{
+	saa711x_set_lcr(sd, NULL);
+	return 0;
+}
+
+static int saa711x_s_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *fmt)
+{
+	saa711x_set_lcr(sd, fmt);
+	return 0;
+}
+
+static int saa711x_set_fmt(struct v4l2_subdev *sd,
+		struct v4l2_subdev_pad_config *cfg,
+		struct v4l2_subdev_format *format)
+{
+	struct v4l2_mbus_framefmt *fmt = &format->format;
+
+	if (format->pad || fmt->code != MEDIA_BUS_FMT_FIXED)
+		return -EINVAL;
+	fmt->field = V4L2_FIELD_INTERLACED;
+	fmt->colorspace = V4L2_COLORSPACE_SMPTE170M;
+	if (format->which == V4L2_SUBDEV_FORMAT_TRY)
+		return 0;
+	return saa711x_set_size(sd, fmt->width, fmt->height);
+}
+
+/* Decode the sliced VBI data stream as created by the saa7115.
+   The format is described in the saa7115 datasheet in Tables 25 and 26
+   and in Figure 33.
+   The current implementation uses SAV/EAV codes and not the ancillary data
+   headers. The vbi->p pointer points to the R_5E_SDID byte right after the SAV
+   code. */
+static int saa711x_decode_vbi_line(struct v4l2_subdev *sd, struct v4l2_decode_vbi_line *vbi)
+{
+	struct saa711x_state *state = to_state(sd);
+	static const char vbi_no_data_pattern[] = {
+		0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0
+	};
+	u8 *p = vbi->p;
+	u32 wss;
+	int id1, id2;   /* the ID1 and ID2 bytes from the internal header */
+
+	vbi->type = 0;  /* mark result as a failure */
+	id1 = p[2];
+	id2 = p[3];
+	/* Note: the field bit is inverted for 60 Hz video */
+	if (state->std & V4L2_STD_525_60)
+		id1 ^= 0x40;
+
+	/* Skip internal header, p now points to the start of the payload */
+	p += 4;
+	vbi->p = p;
+
+	/* calculate field and line number of the VBI packet (1-23) */
+	vbi->is_second_field = ((id1 & 0x40) != 0);
+	vbi->line = (id1 & 0x3f) << 3;
+	vbi->line |= (id2 & 0x70) >> 4;
+
+	/* Obtain data type */
+	id2 &= 0xf;
+
+	/* If the VBI slicer does not detect any signal it will fill up
+	   the payload buffer with 0xa0 bytes. */
+	if (!memcmp(p, vbi_no_data_pattern, sizeof(vbi_no_data_pattern)))
+		return 0;
+
+	/* decode payloads */
+	switch (id2) {
+	case 1:
+		vbi->type = V4L2_SLICED_TELETEXT_B;
+		break;
+	case 4:
+		if (!saa711x_odd_parity(p[0]) || !saa711x_odd_parity(p[1]))
+			return 0;
+		vbi->type = V4L2_SLICED_CAPTION_525;
+		break;
+	case 5:
+		wss = saa711x_decode_wss(p);
+		if (wss == -1)
+			return 0;
+		p[0] = wss & 0xff;
+		p[1] = wss >> 8;
+		vbi->type = V4L2_SLICED_WSS_625;
+		break;
+	case 7:
+		if (saa711x_decode_vps(p, p) != 0)
+			return 0;
+		vbi->type = V4L2_SLICED_VPS;
+		break;
+	default:
+		break;
+	}
+	return 0;
+}
+
+/* ============ SAA7115 AUDIO settings (end) ============= */
+
+static int saa711x_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
+{
+	struct saa711x_state *state = to_state(sd);
+	int status;
+
+	if (state->radio)
+		return 0;
+	status = saa711x_read(sd, R_1F_STATUS_BYTE_2_VD_DEC);
+
+	v4l2_dbg(1, debug, sd, "status: 0x%02x\n", status);
+	vt->signal = ((status & (1 << 6)) == 0) ? 0xffff : 0x0;
+	return 0;
+}
+
+static int saa711x_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
+{
+	struct saa711x_state *state = to_state(sd);
+
+	state->radio = 0;
+	saa711x_set_v4lstd(sd, std);
+	return 0;
+}
+
+static int saa711x_s_radio(struct v4l2_subdev *sd)
+{
+	struct saa711x_state *state = to_state(sd);
+
+	state->radio = 1;
+	return 0;
+}
+
+static int saa711x_s_routing(struct v4l2_subdev *sd,
+			     u32 input, u32 output, u32 config)
+{
+	struct saa711x_state *state = to_state(sd);
+	u8 mask = (state->ident <= SAA7111A) ? 0xf8 : 0xf0;
+
+	v4l2_dbg(1, debug, sd, "decoder set input %d output %d\n",
+		input, output);
+
+	/* saa7111/3 does not have these inputs */
+	if ((state->ident <= SAA7113 ||
+	     state->ident == GM7113C) &&
+	    (input == SAA7115_COMPOSITE4 ||
+	     input == SAA7115_COMPOSITE5)) {
+		return -EINVAL;
+	}
+	if (input > SAA7115_SVIDEO3)
+		return -EINVAL;
+	if (state->input == input && state->output == output)
+		return 0;
+	v4l2_dbg(1, debug, sd, "now setting %s input %s output\n",
+		(input >= SAA7115_SVIDEO0) ? "S-Video" : "Composite",
+		(output == SAA7115_IPORT_ON) ? "iport on" : "iport off");
+	state->input = input;
+
+	/* saa7111 has slightly different input numbering */
+	if (state->ident <= SAA7111A) {
+		if (input >= SAA7115_COMPOSITE4)
+			input -= 2;
+		/* saa7111 specific */
+		saa711x_write(sd, R_10_CHROMA_CNTL_2,
+				(saa711x_read(sd, R_10_CHROMA_CNTL_2) & 0x3f) |
+				((output & 0xc0) ^ 0x40));
+		saa711x_write(sd, R_13_RT_X_PORT_OUT_CNTL,
+				(saa711x_read(sd, R_13_RT_X_PORT_OUT_CNTL) & 0xf0) |
+				((output & 2) ? 0x0a : 0));
+	}
+
+	/* select mode */
+	saa711x_write(sd, R_02_INPUT_CNTL_1,
+		      (saa711x_read(sd, R_02_INPUT_CNTL_1) & mask) |
+		       input);
+
+	/* bypass chrominance trap for S-Video modes */
+	saa711x_write(sd, R_09_LUMA_CNTL,
+			(saa711x_read(sd, R_09_LUMA_CNTL) & 0x7f) |
+			(state->input >= SAA7115_SVIDEO0 ? 0x80 : 0x0));
+
+	state->output = output;
+	if (state->ident == SAA7114 ||
+			state->ident == SAA7115) {
+		saa711x_write(sd, R_83_X_PORT_I_O_ENA_AND_OUT_CLK,
+				(saa711x_read(sd, R_83_X_PORT_I_O_ENA_AND_OUT_CLK) & 0xfe) |
+				(state->output & 0x01));
+	}
+	if (state->ident > SAA7111A) {
+		if (config & SAA7115_IDQ_IS_DEFAULT)
+			saa711x_write(sd, R_85_I_PORT_SIGNAL_POLAR, 0x20);
+		else
+			saa711x_write(sd, R_85_I_PORT_SIGNAL_POLAR, 0x21);
+	}
+	return 0;
+}
+
+static int saa711x_s_gpio(struct v4l2_subdev *sd, u32 val)
+{
+	struct saa711x_state *state = to_state(sd);
+
+	if (state->ident > SAA7111A)
+		return -EINVAL;
+	saa711x_write(sd, 0x11, (saa711x_read(sd, 0x11) & 0x7f) |
+		(val ? 0x80 : 0));
+	return 0;
+}
+
+static int saa711x_s_stream(struct v4l2_subdev *sd, int enable)
+{
+	struct saa711x_state *state = to_state(sd);
+
+	v4l2_dbg(1, debug, sd, "%s output\n",
+			enable ? "enable" : "disable");
+
+	if (state->enable == enable)
+		return 0;
+	state->enable = enable;
+	if (!saa711x_has_reg(state->ident, R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED))
+		return 0;
+	saa711x_write(sd, R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, state->enable);
+	return 0;
+}
+
+static int saa711x_s_crystal_freq(struct v4l2_subdev *sd, u32 freq, u32 flags)
+{
+	struct saa711x_state *state = to_state(sd);
+
+	if (freq != SAA7115_FREQ_32_11_MHZ && freq != SAA7115_FREQ_24_576_MHZ)
+		return -EINVAL;
+	state->crystal_freq = freq;
+	state->double_asclk = flags & SAA7115_FREQ_FL_DOUBLE_ASCLK;
+	state->cgcdiv = (flags & SAA7115_FREQ_FL_CGCDIV) ? 3 : 4;
+	state->ucgc = flags & SAA7115_FREQ_FL_UCGC;
+	state->apll = flags & SAA7115_FREQ_FL_APLL;
+	saa711x_s_clock_freq(sd, state->audclk_freq);
+	return 0;
+}
+
+static int saa711x_reset(struct v4l2_subdev *sd, u32 val)
+{
+	v4l2_dbg(1, debug, sd, "decoder RESET\n");
+	saa711x_writeregs(sd, saa7115_cfg_reset_scaler);
+	return 0;
+}
+
+static int saa711x_g_vbi_data(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_data *data)
+{
+	/* Note: the internal field ID is inverted for NTSC,
+	   so data->field 0 maps to the saa7115 even field,
+	   whereas for PAL it maps to the saa7115 odd field. */
+	switch (data->id) {
+	case V4L2_SLICED_WSS_625:
+		if (saa711x_read(sd, 0x6b) & 0xc0)
+			return -EIO;
+		data->data[0] = saa711x_read(sd, 0x6c);
+		data->data[1] = saa711x_read(sd, 0x6d);
+		return 0;
+	case V4L2_SLICED_CAPTION_525:
+		if (data->field == 0) {
+			/* CC */
+			if (saa711x_read(sd, 0x66) & 0x30)
+				return -EIO;
+			data->data[0] = saa711x_read(sd, 0x69);
+			data->data[1] = saa711x_read(sd, 0x6a);
+			return 0;
+		}
+		/* XDS */
+		if (saa711x_read(sd, 0x66) & 0xc0)
+			return -EIO;
+		data->data[0] = saa711x_read(sd, 0x67);
+		data->data[1] = saa711x_read(sd, 0x68);
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int saa711x_querystd(struct v4l2_subdev *sd, v4l2_std_id *std)
+{
+	struct saa711x_state *state = to_state(sd);
+	int reg1f, reg1e;
+
+	/*
+	 * The V4L2 core already initializes std with all supported
+	 * Standards. All driver needs to do is to mask it, to remove
+	 * standards that don't apply from the mask
+	 */
+
+	reg1f = saa711x_read(sd, R_1F_STATUS_BYTE_2_VD_DEC);
+
+	if (state->ident == SAA7115) {
+		reg1e = saa711x_read(sd, R_1E_STATUS_BYTE_1_VD_DEC);
+
+		v4l2_dbg(1, debug, sd, "Status byte 1 (0x1e)=0x%02x\n", reg1e);
+
+		switch (reg1e & 0x03) {
+		case 1:
+			*std &= V4L2_STD_NTSC;
+			break;
+		case 2:
+			/*
+			 * V4L2_STD_PAL just cover the european PAL standards.
+			 * This is wrong, as the device could also be using an
+			 * other PAL standard.
+			 */
+			*std &= V4L2_STD_PAL   | V4L2_STD_PAL_N  | V4L2_STD_PAL_Nc |
+				V4L2_STD_PAL_M | V4L2_STD_PAL_60;
+			break;
+		case 3:
+			*std &= V4L2_STD_SECAM;
+			break;
+		default:
+			*std = V4L2_STD_UNKNOWN;
+			/* Can't detect anything */
+			break;
+		}
+	}
+
+	v4l2_dbg(1, debug, sd, "Status byte 2 (0x1f)=0x%02x\n", reg1f);
+
+	/* horizontal/vertical not locked */
+	if (reg1f & 0x40) {
+		*std = V4L2_STD_UNKNOWN;
+		goto ret;
+	}
+
+	if (reg1f & 0x20)
+		*std &= V4L2_STD_525_60;
+	else
+		*std &= V4L2_STD_625_50;
+
+ret:
+	v4l2_dbg(1, debug, sd, "detected std mask = %08Lx\n", *std);
+
+	return 0;
+}
+
+static int saa711x_g_input_status(struct v4l2_subdev *sd, u32 *status)
+{
+	struct saa711x_state *state = to_state(sd);
+	int reg1e = 0x80;
+	int reg1f;
+
+	*status = V4L2_IN_ST_NO_SIGNAL;
+	if (state->ident == SAA7115)
+		reg1e = saa711x_read(sd, R_1E_STATUS_BYTE_1_VD_DEC);
+	reg1f = saa711x_read(sd, R_1F_STATUS_BYTE_2_VD_DEC);
+	if ((reg1f & 0xc1) == 0x81 && (reg1e & 0xc0) == 0x80)
+		*status = 0;
+	return 0;
+}
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int saa711x_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
+{
+	reg->val = saa711x_read(sd, reg->reg & 0xff);
+	reg->size = 1;
+	return 0;
+}
+
+static int saa711x_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg)
+{
+	saa711x_write(sd, reg->reg & 0xff, reg->val & 0xff);
+	return 0;
+}
+#endif
+
+static int saa711x_log_status(struct v4l2_subdev *sd)
+{
+	struct saa711x_state *state = to_state(sd);
+	int reg1e, reg1f;
+	int signalOk;
+	int vcr;
+
+	v4l2_info(sd, "Audio frequency: %d Hz\n", state->audclk_freq);
+	if (state->ident != SAA7115) {
+		/* status for the saa7114 */
+		reg1f = saa711x_read(sd, R_1F_STATUS_BYTE_2_VD_DEC);
+		signalOk = (reg1f & 0xc1) == 0x81;
+		v4l2_info(sd, "Video signal:    %s\n", signalOk ? "ok" : "bad");
+		v4l2_info(sd, "Frequency:       %s\n", (reg1f & 0x20) ? "60 Hz" : "50 Hz");
+		return 0;
+	}
+
+	/* status for the saa7115 */
+	reg1e = saa711x_read(sd, R_1E_STATUS_BYTE_1_VD_DEC);
+	reg1f = saa711x_read(sd, R_1F_STATUS_BYTE_2_VD_DEC);
+
+	signalOk = (reg1f & 0xc1) == 0x81 && (reg1e & 0xc0) == 0x80;
+	vcr = !(reg1f & 0x10);
+
+	if (state->input >= 6)
+		v4l2_info(sd, "Input:           S-Video %d\n", state->input - 6);
+	else
+		v4l2_info(sd, "Input:           Composite %d\n", state->input);
+	v4l2_info(sd, "Video signal:    %s\n", signalOk ? (vcr ? "VCR" : "broadcast/DVD") : "bad");
+	v4l2_info(sd, "Frequency:       %s\n", (reg1f & 0x20) ? "60 Hz" : "50 Hz");
+
+	switch (reg1e & 0x03) {
+	case 1:
+		v4l2_info(sd, "Detected format: NTSC\n");
+		break;
+	case 2:
+		v4l2_info(sd, "Detected format: PAL\n");
+		break;
+	case 3:
+		v4l2_info(sd, "Detected format: SECAM\n");
+		break;
+	default:
+		v4l2_info(sd, "Detected format: BW/No color\n");
+		break;
+	}
+	v4l2_info(sd, "Width, Height:   %d, %d\n", state->width, state->height);
+	v4l2_ctrl_handler_log_status(&state->hdl, sd->name);
+	return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+static const struct v4l2_ctrl_ops saa711x_ctrl_ops = {
+	.s_ctrl = saa711x_s_ctrl,
+	.g_volatile_ctrl = saa711x_g_volatile_ctrl,
+};
+
+static const struct v4l2_subdev_core_ops saa711x_core_ops = {
+	.log_status = saa711x_log_status,
+	.reset = saa711x_reset,
+	.s_gpio = saa711x_s_gpio,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	.g_register = saa711x_g_register,
+	.s_register = saa711x_s_register,
+#endif
+};
+
+static const struct v4l2_subdev_tuner_ops saa711x_tuner_ops = {
+	.s_radio = saa711x_s_radio,
+	.g_tuner = saa711x_g_tuner,
+};
+
+static const struct v4l2_subdev_audio_ops saa711x_audio_ops = {
+	.s_clock_freq = saa711x_s_clock_freq,
+};
+
+static const struct v4l2_subdev_video_ops saa711x_video_ops = {
+	.s_std = saa711x_s_std,
+	.s_routing = saa711x_s_routing,
+	.s_crystal_freq = saa711x_s_crystal_freq,
+	.s_stream = saa711x_s_stream,
+	.querystd = saa711x_querystd,
+	.g_input_status = saa711x_g_input_status,
+};
+
+static const struct v4l2_subdev_vbi_ops saa711x_vbi_ops = {
+	.g_vbi_data = saa711x_g_vbi_data,
+	.decode_vbi_line = saa711x_decode_vbi_line,
+	.g_sliced_fmt = saa711x_g_sliced_fmt,
+	.s_sliced_fmt = saa711x_s_sliced_fmt,
+	.s_raw_fmt = saa711x_s_raw_fmt,
+};
+
+static const struct v4l2_subdev_pad_ops saa711x_pad_ops = {
+	.set_fmt = saa711x_set_fmt,
+};
+
+static const struct v4l2_subdev_ops saa711x_ops = {
+	.core = &saa711x_core_ops,
+	.tuner = &saa711x_tuner_ops,
+	.audio = &saa711x_audio_ops,
+	.video = &saa711x_video_ops,
+	.vbi = &saa711x_vbi_ops,
+	.pad = &saa711x_pad_ops,
+};
+
+#define CHIP_VER_SIZE	16
+
+/* ----------------------------------------------------------------------- */
+
+static void saa711x_write_platform_data(struct saa711x_state *state,
+					struct saa7115_platform_data *data)
+{
+	struct v4l2_subdev *sd = &state->sd;
+	u8 work;
+
+	if (state->ident != GM7113C &&
+	    state->ident != SAA7113)
+		return;
+
+	if (data->saa7113_r08_htc) {
+		work = saa711x_read(sd, R_08_SYNC_CNTL);
+		work &= ~SAA7113_R_08_HTC_MASK;
+		work |= ((*data->saa7113_r08_htc) << SAA7113_R_08_HTC_OFFSET);
+		saa711x_write(sd, R_08_SYNC_CNTL, work);
+	}
+
+	if (data->saa7113_r10_vrln) {
+		work = saa711x_read(sd, R_10_CHROMA_CNTL_2);
+		work &= ~SAA7113_R_10_VRLN_MASK;
+		if (*data->saa7113_r10_vrln)
+			work |= (1 << SAA7113_R_10_VRLN_OFFSET);
+		saa711x_write(sd, R_10_CHROMA_CNTL_2, work);
+	}
+
+	if (data->saa7113_r10_ofts) {
+		work = saa711x_read(sd, R_10_CHROMA_CNTL_2);
+		work &= ~SAA7113_R_10_OFTS_MASK;
+		work |= (*data->saa7113_r10_ofts << SAA7113_R_10_OFTS_OFFSET);
+		saa711x_write(sd, R_10_CHROMA_CNTL_2, work);
+	}
+
+	if (data->saa7113_r12_rts0) {
+		work = saa711x_read(sd, R_12_RT_SIGNAL_CNTL);
+		work &= ~SAA7113_R_12_RTS0_MASK;
+		work |= (*data->saa7113_r12_rts0 << SAA7113_R_12_RTS0_OFFSET);
+
+		/* According to the datasheet,
+		 * SAA7113_RTS_DOT_IN should only be used on RTS1 */
+		WARN_ON(*data->saa7113_r12_rts0 == SAA7113_RTS_DOT_IN);
+		saa711x_write(sd, R_12_RT_SIGNAL_CNTL, work);
+	}
+
+	if (data->saa7113_r12_rts1) {
+		work = saa711x_read(sd, R_12_RT_SIGNAL_CNTL);
+		work &= ~SAA7113_R_12_RTS1_MASK;
+		work |= (*data->saa7113_r12_rts1 << SAA7113_R_12_RTS1_OFFSET);
+		saa711x_write(sd, R_12_RT_SIGNAL_CNTL, work);
+	}
+
+	if (data->saa7113_r13_adlsb) {
+		work = saa711x_read(sd, R_13_RT_X_PORT_OUT_CNTL);
+		work &= ~SAA7113_R_13_ADLSB_MASK;
+		if (*data->saa7113_r13_adlsb)
+			work |= (1 << SAA7113_R_13_ADLSB_OFFSET);
+		saa711x_write(sd, R_13_RT_X_PORT_OUT_CNTL, work);
+	}
+}
+
+/**
+ * saa711x_detect_chip - Detects the saa711x (or clone) variant
+ * @client:		I2C client structure.
+ * @id:			I2C device ID structure.
+ * @name:		Name of the device to be filled.
+ *
+ * Detects the Philips/NXP saa711x chip, or some clone of it.
+ * if 'id' is NULL or id->driver_data is equal to 1, it auto-probes
+ * the analog demod.
+ * If the tuner is not found, it returns -ENODEV.
+ * If auto-detection is disabled and the tuner doesn't match what it was
+ *	required, it returns -EINVAL and fills 'name'.
+ * If the chip is found, it returns the chip ID and fills 'name'.
+ */
+static int saa711x_detect_chip(struct i2c_client *client,
+			       const struct i2c_device_id *id,
+			       char *name)
+{
+	char chip_ver[CHIP_VER_SIZE];
+	char chip_id;
+	int i;
+	int autodetect;
+
+	autodetect = !id || id->driver_data == 1;
+
+	/* Read the chip version register */
+	for (i = 0; i < CHIP_VER_SIZE; i++) {
+		i2c_smbus_write_byte_data(client, 0, i);
+		chip_ver[i] = i2c_smbus_read_byte_data(client, 0);
+		name[i] = (chip_ver[i] & 0x0f) + '0';
+		if (name[i] > '9')
+			name[i] += 'a' - '9' - 1;
+	}
+	name[i] = '\0';
+
+	/* Check if it is a Philips/NXP chip */
+	if (!memcmp(name + 1, "f711", 4)) {
+		chip_id = name[5];
+		snprintf(name, CHIP_VER_SIZE, "saa711%c", chip_id);
+
+		if (!autodetect && strcmp(name, id->name))
+			return -EINVAL;
+
+		switch (chip_id) {
+		case '1':
+			if (chip_ver[0] & 0xf0) {
+				snprintf(name, CHIP_VER_SIZE, "saa711%ca", chip_id);
+				v4l_info(client, "saa7111a variant found\n");
+				return SAA7111A;
+			}
+			return SAA7111;
+		case '3':
+			return SAA7113;
+		case '4':
+			return SAA7114;
+		case '5':
+			return SAA7115;
+		case '8':
+			return SAA7118;
+		default:
+			v4l2_info(client,
+				  "WARNING: Philips/NXP chip unknown - Falling back to saa7111\n");
+			return SAA7111;
+		}
+	}
+
+	/* Check if it is a gm7113c */
+	if (!memcmp(name, "0000", 4)) {
+		chip_id = 0;
+		for (i = 0; i < 4; i++) {
+			chip_id = chip_id << 1;
+			chip_id |= (chip_ver[i] & 0x80) ? 1 : 0;
+		}
+
+		/*
+		 * Note: From the datasheet, only versions 1 and 2
+		 * exists. However, tests on a device labeled as:
+		 * "GM7113C 1145" returned "10" on all 16 chip
+		 * version (reg 0x00) reads. So, we need to also
+		 * accept at least version 0. For now, let's just
+		 * assume that a device that returns "0000" for
+		 * the lower nibble is a gm7113c.
+		 */
+
+		strscpy(name, "gm7113c", CHIP_VER_SIZE);
+
+		if (!autodetect && strcmp(name, id->name))
+			return -EINVAL;
+
+		v4l_dbg(1, debug, client,
+			"It seems to be a %s chip (%*ph) @ 0x%x.\n",
+			name, 16, chip_ver, client->addr << 1);
+
+		return GM7113C;
+	}
+
+	/* Check if it is a CJC7113 */
+	if (!memcmp(name, "1111111111111111", CHIP_VER_SIZE)) {
+		strscpy(name, "cjc7113", CHIP_VER_SIZE);
+
+		if (!autodetect && strcmp(name, id->name))
+			return -EINVAL;
+
+		v4l_dbg(1, debug, client,
+			"It seems to be a %s chip (%*ph) @ 0x%x.\n",
+			name, 16, chip_ver, client->addr << 1);
+
+		/* CJC7113 seems to be SAA7113-compatible */
+		return SAA7113;
+	}
+
+	/* Chip was not discovered. Return its ID and don't bind */
+	v4l_dbg(1, debug, client, "chip %*ph @ 0x%x is unknown.\n",
+		16, chip_ver, client->addr << 1);
+	return -ENODEV;
+}
+
+static int saa711x_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct saa711x_state *state;
+	struct v4l2_subdev *sd;
+	struct v4l2_ctrl_handler *hdl;
+	struct saa7115_platform_data *pdata;
+	int ident;
+	char name[CHIP_VER_SIZE + 1];
+#if defined(CONFIG_MEDIA_CONTROLLER)
+	int ret;
+#endif
+
+	/* Check if the adapter supports the needed features */
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		return -EIO;
+
+	ident = saa711x_detect_chip(client, id, name);
+	if (ident == -EINVAL) {
+		/* Chip exists, but doesn't match */
+		v4l_warn(client, "found %s while %s was expected\n",
+			 name, id->name);
+		return -ENODEV;
+	}
+	if (ident < 0)
+		return ident;
+
+	strscpy(client->name, name, sizeof(client->name));
+
+	state = devm_kzalloc(&client->dev, sizeof(*state), GFP_KERNEL);
+	if (state == NULL)
+		return -ENOMEM;
+	sd = &state->sd;
+	v4l2_i2c_subdev_init(sd, client, &saa711x_ops);
+
+#if defined(CONFIG_MEDIA_CONTROLLER)
+	state->pads[SAA711X_PAD_IF_INPUT].flags = MEDIA_PAD_FL_SINK;
+	state->pads[SAA711X_PAD_IF_INPUT].sig_type = PAD_SIGNAL_ANALOG;
+	state->pads[SAA711X_PAD_VID_OUT].flags = MEDIA_PAD_FL_SOURCE;
+	state->pads[SAA711X_PAD_VID_OUT].sig_type = PAD_SIGNAL_DV;
+
+	sd->entity.function = MEDIA_ENT_F_ATV_DECODER;
+
+	ret = media_entity_pads_init(&sd->entity, SAA711X_NUM_PADS,
+				     state->pads);
+	if (ret < 0)
+		return ret;
+#endif
+
+	v4l_info(client, "%s found @ 0x%x (%s)\n", name,
+		 client->addr << 1, client->adapter->name);
+	hdl = &state->hdl;
+	v4l2_ctrl_handler_init(hdl, 6);
+	/* add in ascending ID order */
+	v4l2_ctrl_new_std(hdl, &saa711x_ctrl_ops,
+			V4L2_CID_BRIGHTNESS, 0, 255, 1, 128);
+	v4l2_ctrl_new_std(hdl, &saa711x_ctrl_ops,
+			V4L2_CID_CONTRAST, 0, 127, 1, 64);
+	v4l2_ctrl_new_std(hdl, &saa711x_ctrl_ops,
+			V4L2_CID_SATURATION, 0, 127, 1, 64);
+	v4l2_ctrl_new_std(hdl, &saa711x_ctrl_ops,
+			V4L2_CID_HUE, -128, 127, 1, 0);
+	state->agc = v4l2_ctrl_new_std(hdl, &saa711x_ctrl_ops,
+			V4L2_CID_CHROMA_AGC, 0, 1, 1, 1);
+	state->gain = v4l2_ctrl_new_std(hdl, &saa711x_ctrl_ops,
+			V4L2_CID_CHROMA_GAIN, 0, 127, 1, 40);
+	sd->ctrl_handler = hdl;
+	if (hdl->error) {
+		int err = hdl->error;
+
+		v4l2_ctrl_handler_free(hdl);
+		return err;
+	}
+	v4l2_ctrl_auto_cluster(2, &state->agc, 0, true);
+
+	state->input = -1;
+	state->output = SAA7115_IPORT_ON;
+	state->enable = 1;
+	state->radio = 0;
+	state->ident = ident;
+
+	state->audclk_freq = 48000;
+
+	v4l2_dbg(1, debug, sd, "writing init values\n");
+
+	/* init to 60hz/48khz */
+	state->crystal_freq = SAA7115_FREQ_24_576_MHZ;
+	pdata = client->dev.platform_data;
+	switch (state->ident) {
+	case SAA7111:
+	case SAA7111A:
+		saa711x_writeregs(sd, saa7111_init);
+		break;
+	case GM7113C:
+		saa711x_writeregs(sd, gm7113c_init);
+		break;
+	case SAA7113:
+		if (pdata && pdata->saa7113_force_gm7113c_init)
+			saa711x_writeregs(sd, gm7113c_init);
+		else
+			saa711x_writeregs(sd, saa7113_init);
+		break;
+	default:
+		state->crystal_freq = SAA7115_FREQ_32_11_MHZ;
+		saa711x_writeregs(sd, saa7115_init_auto_input);
+	}
+	if (state->ident > SAA7111A && state->ident != GM7113C)
+		saa711x_writeregs(sd, saa7115_init_misc);
+
+	if (pdata)
+		saa711x_write_platform_data(state, pdata);
+
+	saa711x_set_v4lstd(sd, V4L2_STD_NTSC);
+	v4l2_ctrl_handler_setup(hdl);
+
+	v4l2_dbg(1, debug, sd, "status: (1E) 0x%02x, (1F) 0x%02x\n",
+		saa711x_read(sd, R_1E_STATUS_BYTE_1_VD_DEC),
+		saa711x_read(sd, R_1F_STATUS_BYTE_2_VD_DEC));
+	return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+static int saa711x_remove(struct i2c_client *client)
+{
+	struct v4l2_subdev *sd = i2c_get_clientdata(client);
+
+	v4l2_device_unregister_subdev(sd);
+	v4l2_ctrl_handler_free(sd->ctrl_handler);
+	return 0;
+}
+
+static const struct i2c_device_id saa711x_id[] = {
+	{ "saa7115_auto", 1 }, /* autodetect */
+	{ "saa7111", 0 },
+	{ "saa7113", 0 },
+	{ "saa7114", 0 },
+	{ "saa7115", 0 },
+	{ "saa7118", 0 },
+	{ "gm7113c", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, saa711x_id);
+
+static struct i2c_driver saa711x_driver = {
+	.driver = {
+		.name	= "saa7115",
+	},
+	.probe		= saa711x_probe,
+	.remove		= saa711x_remove,
+	.id_table	= saa711x_id,
+};
+
+module_i2c_driver(saa711x_driver);