diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-27 10:05:51 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-27 10:05:51 +0000 |
commit | 5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 (patch) | |
tree | a94efe259b9009378be6d90eb30d2b019d95c194 /drivers/media/pci/saa7164/saa7164-cards.c | |
parent | Initial commit. (diff) | |
download | linux-5d1646d90e1f2cceb9f0828f4b28318cd0ec7744.tar.xz linux-5d1646d90e1f2cceb9f0828f4b28318cd0ec7744.zip |
Adding upstream version 5.10.209.upstream/5.10.209
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/media/pci/saa7164/saa7164-cards.c')
-rw-r--r-- | drivers/media/pci/saa7164/saa7164-cards.c | 943 |
1 files changed, 943 insertions, 0 deletions
diff --git a/drivers/media/pci/saa7164/saa7164-cards.c b/drivers/media/pci/saa7164/saa7164-cards.c new file mode 100644 index 000000000..3ac6e8393 --- /dev/null +++ b/drivers/media/pci/saa7164/saa7164-cards.c @@ -0,0 +1,943 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Driver for the NXP SAA7164 PCIe bridge + * + * Copyright (c) 2010-2015 Steven Toth <stoth@kernellabs.com> + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/delay.h> + +#include "saa7164.h" + +/* The Bridge API needs to understand register widths (in bytes) for the + * attached I2C devices, so we can simplify the virtual i2c mechansms + * and keep the -i2c.c implementation clean. + */ +#define REGLEN_0bit 0 +#define REGLEN_8bit 1 +#define REGLEN_16bit 2 + +struct saa7164_board saa7164_boards[] = { + [SAA7164_BOARD_UNKNOWN] = { + /* Bridge will not load any firmware, without knowing + * the rev this would be fatal. */ + .name = "Unknown", + }, + [SAA7164_BOARD_UNKNOWN_REV2] = { + /* Bridge will load the v2 f/w and dump descriptors */ + /* Required during new board bringup */ + .name = "Generic Rev2", + .chiprev = SAA7164_CHIP_REV2, + }, + [SAA7164_BOARD_UNKNOWN_REV3] = { + /* Bridge will load the v2 f/w and dump descriptors */ + /* Required during new board bringup */ + .name = "Generic Rev3", + .chiprev = SAA7164_CHIP_REV3, + }, + [SAA7164_BOARD_HAUPPAUGE_HVR2200] = { + .name = "Hauppauge WinTV-HVR2200", + .porta = SAA7164_MPEG_DVB, + .portb = SAA7164_MPEG_DVB, + .portc = SAA7164_MPEG_ENCODER, + .portd = SAA7164_MPEG_ENCODER, + .porte = SAA7164_MPEG_VBI, + .portf = SAA7164_MPEG_VBI, + .chiprev = SAA7164_CHIP_REV3, + .unit = {{ + .id = 0x1d, + .type = SAA7164_UNIT_EEPROM, + .name = "4K EEPROM", + .i2c_bus_nr = SAA7164_I2C_BUS_0, + .i2c_bus_addr = 0xa0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x04, + .type = SAA7164_UNIT_TUNER, + .name = "TDA18271-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1b, + .type = SAA7164_UNIT_TUNER, + .name = "TDA18271-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1e, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "TDA10048-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0x10 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1f, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "TDA10048-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0x12 >> 1, + .i2c_reg_len = REGLEN_8bit, + } }, + }, + [SAA7164_BOARD_HAUPPAUGE_HVR2200_2] = { + .name = "Hauppauge WinTV-HVR2200", + .porta = SAA7164_MPEG_DVB, + .portb = SAA7164_MPEG_DVB, + .portc = SAA7164_MPEG_ENCODER, + .portd = SAA7164_MPEG_ENCODER, + .porte = SAA7164_MPEG_VBI, + .portf = SAA7164_MPEG_VBI, + .chiprev = SAA7164_CHIP_REV2, + .unit = {{ + .id = 0x06, + .type = SAA7164_UNIT_EEPROM, + .name = "4K EEPROM", + .i2c_bus_nr = SAA7164_I2C_BUS_0, + .i2c_bus_addr = 0xa0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x04, + .type = SAA7164_UNIT_TUNER, + .name = "TDA18271-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x05, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "TDA10048-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0x10 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1e, + .type = SAA7164_UNIT_TUNER, + .name = "TDA18271-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1f, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "TDA10048-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0x12 >> 1, + .i2c_reg_len = REGLEN_8bit, + } }, + }, + [SAA7164_BOARD_HAUPPAUGE_HVR2200_3] = { + .name = "Hauppauge WinTV-HVR2200", + .porta = SAA7164_MPEG_DVB, + .portb = SAA7164_MPEG_DVB, + .portc = SAA7164_MPEG_ENCODER, + .portd = SAA7164_MPEG_ENCODER, + .porte = SAA7164_MPEG_VBI, + .portf = SAA7164_MPEG_VBI, + .chiprev = SAA7164_CHIP_REV2, + .unit = {{ + .id = 0x1d, + .type = SAA7164_UNIT_EEPROM, + .name = "4K EEPROM", + .i2c_bus_nr = SAA7164_I2C_BUS_0, + .i2c_bus_addr = 0xa0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x04, + .type = SAA7164_UNIT_TUNER, + .name = "TDA18271-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x05, + .type = SAA7164_UNIT_ANALOG_DEMODULATOR, + .name = "TDA8290-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0x84 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1b, + .type = SAA7164_UNIT_TUNER, + .name = "TDA18271-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1c, + .type = SAA7164_UNIT_ANALOG_DEMODULATOR, + .name = "TDA8290-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0x84 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1e, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "TDA10048-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0x10 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1f, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "TDA10048-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0x12 >> 1, + .i2c_reg_len = REGLEN_8bit, + } }, + }, + [SAA7164_BOARD_HAUPPAUGE_HVR2200_4] = { + .name = "Hauppauge WinTV-HVR2200", + .porta = SAA7164_MPEG_DVB, + .portb = SAA7164_MPEG_DVB, + .portc = SAA7164_MPEG_ENCODER, + .portd = SAA7164_MPEG_ENCODER, + .porte = SAA7164_MPEG_VBI, + .portf = SAA7164_MPEG_VBI, + .chiprev = SAA7164_CHIP_REV3, + .unit = {{ + .id = 0x1d, + .type = SAA7164_UNIT_EEPROM, + .name = "4K EEPROM", + .i2c_bus_nr = SAA7164_I2C_BUS_0, + .i2c_bus_addr = 0xa0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x04, + .type = SAA7164_UNIT_TUNER, + .name = "TDA18271-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x05, + .type = SAA7164_UNIT_ANALOG_DEMODULATOR, + .name = "TDA8290-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0x84 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1b, + .type = SAA7164_UNIT_TUNER, + .name = "TDA18271-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1c, + .type = SAA7164_UNIT_ANALOG_DEMODULATOR, + .name = "TDA8290-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0x84 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1e, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "TDA10048-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0x10 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1f, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "TDA10048-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0x12 >> 1, + .i2c_reg_len = REGLEN_8bit, + } }, + }, + [SAA7164_BOARD_HAUPPAUGE_HVR2250] = { + .name = "Hauppauge WinTV-HVR2250", + .porta = SAA7164_MPEG_DVB, + .portb = SAA7164_MPEG_DVB, + .portc = SAA7164_MPEG_ENCODER, + .portd = SAA7164_MPEG_ENCODER, + .porte = SAA7164_MPEG_VBI, + .portf = SAA7164_MPEG_VBI, + .chiprev = SAA7164_CHIP_REV3, + .unit = {{ + .id = 0x22, + .type = SAA7164_UNIT_EEPROM, + .name = "4K EEPROM", + .i2c_bus_nr = SAA7164_I2C_BUS_0, + .i2c_bus_addr = 0xa0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x04, + .type = SAA7164_UNIT_TUNER, + .name = "TDA18271-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x07, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "CX24228/S5H1411-1 (TOP)", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0x32 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x08, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "CX24228/S5H1411-1 (QAM)", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0x34 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1e, + .type = SAA7164_UNIT_TUNER, + .name = "TDA18271-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x20, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "CX24228/S5H1411-2 (TOP)", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0x32 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x23, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "CX24228/S5H1411-2 (QAM)", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0x34 >> 1, + .i2c_reg_len = REGLEN_8bit, + } }, + }, + [SAA7164_BOARD_HAUPPAUGE_HVR2250_2] = { + .name = "Hauppauge WinTV-HVR2250", + .porta = SAA7164_MPEG_DVB, + .portb = SAA7164_MPEG_DVB, + .portc = SAA7164_MPEG_ENCODER, + .portd = SAA7164_MPEG_ENCODER, + .porte = SAA7164_MPEG_VBI, + .portf = SAA7164_MPEG_VBI, + .chiprev = SAA7164_CHIP_REV3, + .unit = {{ + .id = 0x28, + .type = SAA7164_UNIT_EEPROM, + .name = "4K EEPROM", + .i2c_bus_nr = SAA7164_I2C_BUS_0, + .i2c_bus_addr = 0xa0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x04, + .type = SAA7164_UNIT_TUNER, + .name = "TDA18271-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x07, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "CX24228/S5H1411-1 (TOP)", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0x32 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x08, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "CX24228/S5H1411-1 (QAM)", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0x34 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x24, + .type = SAA7164_UNIT_TUNER, + .name = "TDA18271-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x26, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "CX24228/S5H1411-2 (TOP)", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0x32 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x29, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "CX24228/S5H1411-2 (QAM)", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0x34 >> 1, + .i2c_reg_len = REGLEN_8bit, + } }, + }, + [SAA7164_BOARD_HAUPPAUGE_HVR2250_3] = { + .name = "Hauppauge WinTV-HVR2250", + .porta = SAA7164_MPEG_DVB, + .portb = SAA7164_MPEG_DVB, + .portc = SAA7164_MPEG_ENCODER, + .portd = SAA7164_MPEG_ENCODER, + .porte = SAA7164_MPEG_VBI, + .portf = SAA7164_MPEG_VBI, + .chiprev = SAA7164_CHIP_REV3, + .unit = {{ + .id = 0x26, + .type = SAA7164_UNIT_EEPROM, + .name = "4K EEPROM", + .i2c_bus_nr = SAA7164_I2C_BUS_0, + .i2c_bus_addr = 0xa0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x04, + .type = SAA7164_UNIT_TUNER, + .name = "TDA18271-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x07, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "CX24228/S5H1411-1 (TOP)", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0x32 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x08, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "CX24228/S5H1411-1 (QAM)", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0x34 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x22, + .type = SAA7164_UNIT_TUNER, + .name = "TDA18271-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x24, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "CX24228/S5H1411-2 (TOP)", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0x32 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x27, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "CX24228/S5H1411-2 (QAM)", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0x34 >> 1, + .i2c_reg_len = REGLEN_8bit, + } }, + }, + [SAA7164_BOARD_HAUPPAUGE_HVR2200_5] = { + .name = "Hauppauge WinTV-HVR2200", + .porta = SAA7164_MPEG_DVB, + .portb = SAA7164_MPEG_DVB, + .chiprev = SAA7164_CHIP_REV3, + .unit = {{ + .id = 0x23, + .type = SAA7164_UNIT_EEPROM, + .name = "4K EEPROM", + .i2c_bus_nr = SAA7164_I2C_BUS_0, + .i2c_bus_addr = 0xa0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x04, + .type = SAA7164_UNIT_TUNER, + .name = "TDA18271-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x05, + .type = SAA7164_UNIT_ANALOG_DEMODULATOR, + .name = "TDA8290-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0x84 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x21, + .type = SAA7164_UNIT_TUNER, + .name = "TDA18271-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x22, + .type = SAA7164_UNIT_ANALOG_DEMODULATOR, + .name = "TDA8290-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0x84 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x24, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "TDA10048-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0x10 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x25, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "TDA10048-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0x12 >> 1, + .i2c_reg_len = REGLEN_8bit, + } }, + }, + [SAA7164_BOARD_HAUPPAUGE_HVR2255proto] = { + .name = "Hauppauge WinTV-HVR2255(proto)", + .porta = SAA7164_MPEG_DVB, + .portb = SAA7164_MPEG_DVB, + .portc = SAA7164_MPEG_ENCODER, + .portd = SAA7164_MPEG_ENCODER, + .porte = SAA7164_MPEG_VBI, + .portf = SAA7164_MPEG_VBI, + .chiprev = SAA7164_CHIP_REV3, + .unit = {{ + .id = 0x27, + .type = SAA7164_UNIT_EEPROM, + .name = "4K EEPROM", + .i2c_bus_nr = SAA7164_I2C_BUS_0, + .i2c_bus_addr = 0xa0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x04, + .type = SAA7164_UNIT_TUNER, + .name = "SI2157-1", + .i2c_bus_nr = SAA7164_I2C_BUS_0, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_0bit, + }, { + .id = 0x06, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "LGDT3306", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0xb2 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x24, + .type = SAA7164_UNIT_TUNER, + .name = "SI2157-2", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_0bit, + }, { + .id = 0x26, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "LGDT3306-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0x1c >> 1, + .i2c_reg_len = REGLEN_8bit, + } }, + }, + [SAA7164_BOARD_HAUPPAUGE_HVR2255] = { + .name = "Hauppauge WinTV-HVR2255", + .porta = SAA7164_MPEG_DVB, + .portb = SAA7164_MPEG_DVB, + .portc = SAA7164_MPEG_ENCODER, + .portd = SAA7164_MPEG_ENCODER, + .porte = SAA7164_MPEG_VBI, + .portf = SAA7164_MPEG_VBI, + .chiprev = SAA7164_CHIP_REV3, + .unit = {{ + .id = 0x28, + .type = SAA7164_UNIT_EEPROM, + .name = "4K EEPROM", + .i2c_bus_nr = SAA7164_I2C_BUS_0, + .i2c_bus_addr = 0xa0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x04, + .type = SAA7164_UNIT_TUNER, + .name = "SI2157-1", + .i2c_bus_nr = SAA7164_I2C_BUS_0, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_0bit, + }, { + .id = 0x06, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "LGDT3306-1", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0xb2 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x25, + .type = SAA7164_UNIT_TUNER, + .name = "SI2157-2", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_0bit, + }, { + .id = 0x27, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "LGDT3306-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0x1c >> 1, + .i2c_reg_len = REGLEN_8bit, + } }, + }, + [SAA7164_BOARD_HAUPPAUGE_HVR2205] = { + .name = "Hauppauge WinTV-HVR2205", + .porta = SAA7164_MPEG_DVB, + .portb = SAA7164_MPEG_DVB, + .portc = SAA7164_MPEG_ENCODER, + .portd = SAA7164_MPEG_ENCODER, + .porte = SAA7164_MPEG_VBI, + .portf = SAA7164_MPEG_VBI, + .chiprev = SAA7164_CHIP_REV3, + .unit = {{ + .id = 0x28, + .type = SAA7164_UNIT_EEPROM, + .name = "4K EEPROM", + .i2c_bus_nr = SAA7164_I2C_BUS_0, + .i2c_bus_addr = 0xa0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x04, + .type = SAA7164_UNIT_TUNER, + .name = "SI2157-1", + .i2c_bus_nr = SAA7164_I2C_BUS_0, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_0bit, + }, { + .id = 0x06, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "SI2168-1", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0xc8 >> 1, + .i2c_reg_len = REGLEN_0bit, + }, { + .id = 0x25, + .type = SAA7164_UNIT_TUNER, + .name = "SI2157-2", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_0bit, + }, { + .id = 0x27, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "SI2168-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0xcc >> 1, + .i2c_reg_len = REGLEN_0bit, + } }, + }, +}; +const unsigned int saa7164_bcount = ARRAY_SIZE(saa7164_boards); + +/* ------------------------------------------------------------------ */ +/* PCI subsystem IDs */ + +struct saa7164_subid saa7164_subids[] = { + { + .subvendor = 0x0070, + .subdevice = 0x8880, + .card = SAA7164_BOARD_HAUPPAUGE_HVR2250, + }, { + .subvendor = 0x0070, + .subdevice = 0x8810, + .card = SAA7164_BOARD_HAUPPAUGE_HVR2250, + }, { + .subvendor = 0x0070, + .subdevice = 0x8980, + .card = SAA7164_BOARD_HAUPPAUGE_HVR2200, + }, { + .subvendor = 0x0070, + .subdevice = 0x8900, + .card = SAA7164_BOARD_HAUPPAUGE_HVR2200_2, + }, { + .subvendor = 0x0070, + .subdevice = 0x8901, + .card = SAA7164_BOARD_HAUPPAUGE_HVR2200_3, + }, { + .subvendor = 0x0070, + .subdevice = 0x88A1, + .card = SAA7164_BOARD_HAUPPAUGE_HVR2250_3, + }, { + .subvendor = 0x0070, + .subdevice = 0x8891, + .card = SAA7164_BOARD_HAUPPAUGE_HVR2250_2, + }, { + .subvendor = 0x0070, + .subdevice = 0x8851, + .card = SAA7164_BOARD_HAUPPAUGE_HVR2250_2, + }, { + .subvendor = 0x0070, + .subdevice = 0x8940, + .card = SAA7164_BOARD_HAUPPAUGE_HVR2200_4, + }, { + .subvendor = 0x0070, + .subdevice = 0x8953, + .card = SAA7164_BOARD_HAUPPAUGE_HVR2200_5, + }, { + .subvendor = 0x0070, + .subdevice = 0xf111, + .card = SAA7164_BOARD_HAUPPAUGE_HVR2255, + /* Prototype card left here for documentation purposes. + .card = SAA7164_BOARD_HAUPPAUGE_HVR2255proto, + */ + }, { + .subvendor = 0x0070, + .subdevice = 0xf123, + .card = SAA7164_BOARD_HAUPPAUGE_HVR2205, + }, { + .subvendor = 0x0070, + .subdevice = 0xf120, + .card = SAA7164_BOARD_HAUPPAUGE_HVR2205, + }, +}; +const unsigned int saa7164_idcount = ARRAY_SIZE(saa7164_subids); + +void saa7164_card_list(struct saa7164_dev *dev) +{ + int i; + + if (0 == dev->pci->subsystem_vendor && + 0 == dev->pci->subsystem_device) { + printk(KERN_ERR + "%s: Board has no valid PCIe Subsystem ID and can't\n" + "%s: be autodetected. Pass card=<n> insmod option to\n" + "%s: workaround that. Send complaints to the vendor\n" + "%s: of the TV card. Best regards,\n" + "%s: -- tux\n", + dev->name, dev->name, dev->name, dev->name, dev->name); + } else { + printk(KERN_ERR + "%s: Your board isn't known (yet) to the driver.\n" + "%s: Try to pick one of the existing card configs via\n" + "%s: card=<n> insmod option. Updating to the latest\n" + "%s: version might help as well.\n", + dev->name, dev->name, dev->name, dev->name); + } + + printk(KERN_ERR "%s: Here are valid choices for the card=<n> insmod option:\n", + dev->name); + + for (i = 0; i < saa7164_bcount; i++) + printk(KERN_ERR "%s: card=%d -> %s\n", + dev->name, i, saa7164_boards[i].name); +} + +/* TODO: clean this define up into the -cards.c structs */ +#define PCIEBRIDGE_UNITID 2 + +void saa7164_gpio_setup(struct saa7164_dev *dev) +{ + switch (dev->board) { + case SAA7164_BOARD_HAUPPAUGE_HVR2200: + case SAA7164_BOARD_HAUPPAUGE_HVR2200_2: + case SAA7164_BOARD_HAUPPAUGE_HVR2200_3: + case SAA7164_BOARD_HAUPPAUGE_HVR2200_4: + case SAA7164_BOARD_HAUPPAUGE_HVR2200_5: + case SAA7164_BOARD_HAUPPAUGE_HVR2250: + case SAA7164_BOARD_HAUPPAUGE_HVR2250_2: + case SAA7164_BOARD_HAUPPAUGE_HVR2250_3: + case SAA7164_BOARD_HAUPPAUGE_HVR2255proto: + case SAA7164_BOARD_HAUPPAUGE_HVR2255: + case SAA7164_BOARD_HAUPPAUGE_HVR2205: + /* + HVR2200 / HVR2250 + GPIO 2: s5h1411 / tda10048-1 demod reset + GPIO 3: s5h1411 / tda10048-2 demod reset + GPIO 7: IRBlaster Zilog reset + */ + + /* HVR2255 + * GPIO 2: lgdg3306-1 demod reset + * GPIO 3: lgdt3306-2 demod reset + */ + + /* HVR2205 + * GPIO 2: si2168-1 demod reset + * GPIO 3: si2168-2 demod reset + */ + + /* Reset parts by going in and out of reset */ + saa7164_api_clear_gpiobit(dev, PCIEBRIDGE_UNITID, 2); + saa7164_api_clear_gpiobit(dev, PCIEBRIDGE_UNITID, 3); + + msleep(20); + + saa7164_api_set_gpiobit(dev, PCIEBRIDGE_UNITID, 2); + saa7164_api_set_gpiobit(dev, PCIEBRIDGE_UNITID, 3); + break; + } +} + +static void hauppauge_eeprom(struct saa7164_dev *dev, u8 *eeprom_data) +{ + struct tveeprom tv; + + tveeprom_hauppauge_analog(&tv, eeprom_data); + + /* Make sure we support the board model */ + switch (tv.model) { + case 88001: + /* Development board - Limit circulation */ + /* WinTV-HVR2250 (PCIe, Retail, full-height bracket) + * ATSC/QAM (TDA18271/S5H1411) and basic analog, no IR, FM */ + case 88021: + /* WinTV-HVR2250 (PCIe, Retail, full-height bracket) + * ATSC/QAM (TDA18271/S5H1411) and basic analog, MCE CIR, FM */ + break; + case 88041: + /* WinTV-HVR2250 (PCIe, Retail, full-height bracket) + * ATSC/QAM (TDA18271/S5H1411) and basic analog, no IR, FM */ + break; + case 88061: + /* WinTV-HVR2250 (PCIe, Retail, full-height bracket) + * ATSC/QAM (TDA18271/S5H1411) and basic analog, FM */ + break; + case 89519: + case 89609: + /* WinTV-HVR2200 (PCIe, Retail, full-height) + * DVB-T (TDA18271/TDA10048) and basic analog, no IR */ + break; + case 89619: + /* WinTV-HVR2200 (PCIe, Retail, half-height) + * DVB-T (TDA18271/TDA10048) and basic analog, no IR */ + break; + case 151009: + /* First production board rev B2I6 */ + /* WinTV-HVR2205 (PCIe, Retail, full-height bracket) + * DVB-T/T2/C (SI2157/SI2168) and basic analog, FM */ + break; + case 151609: + /* First production board rev B2I6 */ + /* WinTV-HVR2205 (PCIe, Retail, half-height bracket) + * DVB-T/T2/C (SI2157/SI2168) and basic analog, FM */ + break; + case 151061: + /* First production board rev B1I6 */ + /* WinTV-HVR2255 (PCIe, Retail, full-height bracket) + * ATSC/QAM (SI2157/LGDT3306) and basic analog, FM */ + break; + default: + printk(KERN_ERR "%s: Warning: Unknown Hauppauge model #%d\n", + dev->name, tv.model); + break; + } + + printk(KERN_INFO "%s: Hauppauge eeprom: model=%d\n", dev->name, + tv.model); +} + +void saa7164_card_setup(struct saa7164_dev *dev) +{ + static u8 eeprom[256]; + + if (dev->i2c_bus[0].i2c_rc == 0) { + if (saa7164_api_read_eeprom(dev, &eeprom[0], + sizeof(eeprom)) < 0) + return; + } + + switch (dev->board) { + case SAA7164_BOARD_HAUPPAUGE_HVR2200: + case SAA7164_BOARD_HAUPPAUGE_HVR2200_2: + case SAA7164_BOARD_HAUPPAUGE_HVR2200_3: + case SAA7164_BOARD_HAUPPAUGE_HVR2200_4: + case SAA7164_BOARD_HAUPPAUGE_HVR2200_5: + case SAA7164_BOARD_HAUPPAUGE_HVR2250: + case SAA7164_BOARD_HAUPPAUGE_HVR2250_2: + case SAA7164_BOARD_HAUPPAUGE_HVR2250_3: + case SAA7164_BOARD_HAUPPAUGE_HVR2255proto: + case SAA7164_BOARD_HAUPPAUGE_HVR2255: + case SAA7164_BOARD_HAUPPAUGE_HVR2205: + hauppauge_eeprom(dev, &eeprom[0]); + break; + } +} + +/* With most other drivers, the kernel expects to communicate with subdrivers + * through i2c. This bridge does not allow that, it does not expose any direct + * access to I2C. Instead we have to communicate through the device f/w for + * register access to 'processing units'. Each unit has a unique + * id, regardless of how the physical implementation occurs across + * the three physical i2c buses. The being said if we want leverge of + * the existing kernel drivers for tuners and demods we have to 'speak i2c', + * to this bridge implements 3 virtual i2c buses. This is a helper function + * for those. + * + * Description: Translate the kernels notion of an i2c address and bus into + * the appropriate unitid. + */ +int saa7164_i2caddr_to_unitid(struct saa7164_i2c *bus, int addr) +{ + /* For a given bus and i2c device address, return the saa7164 unique + * unitid. < 0 on error */ + + struct saa7164_dev *dev = bus->dev; + struct saa7164_unit *unit; + int i; + + for (i = 0; i < SAA7164_MAX_UNITS; i++) { + unit = &saa7164_boards[dev->board].unit[i]; + + if (unit->type == SAA7164_UNIT_UNDEFINED) + continue; + if ((bus->nr == unit->i2c_bus_nr) && + (addr == unit->i2c_bus_addr)) + return unit->id; + } + + return -1; +} + +/* The 7164 API needs to know the i2c register length in advance. + * this is a helper function. Based on a specific chip addr and bus return the + * reg length. + */ +int saa7164_i2caddr_to_reglen(struct saa7164_i2c *bus, int addr) +{ + /* For a given bus and i2c device address, return the + * saa7164 registry address width. < 0 on error + */ + + struct saa7164_dev *dev = bus->dev; + struct saa7164_unit *unit; + int i; + + for (i = 0; i < SAA7164_MAX_UNITS; i++) { + unit = &saa7164_boards[dev->board].unit[i]; + + if (unit->type == SAA7164_UNIT_UNDEFINED) + continue; + + if ((bus->nr == unit->i2c_bus_nr) && + (addr == unit->i2c_bus_addr)) + return unit->i2c_reg_len; + } + + return -1; +} +/* TODO: implement a 'findeeprom' functio like the above and fix any other + * eeprom related todo's in -api.c. + */ + +/* Translate a unitid into a x readable device name, for display purposes. */ +char *saa7164_unitid_name(struct saa7164_dev *dev, u8 unitid) +{ + char *undefed = "UNDEFINED"; + char *bridge = "BRIDGE"; + struct saa7164_unit *unit; + int i; + + if (unitid == 0) + return bridge; + + for (i = 0; i < SAA7164_MAX_UNITS; i++) { + unit = &saa7164_boards[dev->board].unit[i]; + + if (unit->type == SAA7164_UNIT_UNDEFINED) + continue; + + if (unitid == unit->id) + return unit->name; + } + + return undefed; +} + |