Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

4 files changed, 1319 insertions, 0 deletions

diff --git a/drivers/media/pci/sta2x11/Kconfig b/drivers/media/pci/sta2x11/Kconfig
new file mode 100644
index 000000000..27bb78513
--- /dev/null
+++ b/drivers/media/pci/sta2x11/Kconfig
@@ -0,0 +1,16 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config STA2X11_VIP
+	tristate "STA2X11 VIP Video For Linux"
+	depends on PCI && VIDEO_V4L2 && VIRT_TO_BUS && I2C
+	depends on STA2X11 || COMPILE_TEST
+	select GPIOLIB if MEDIA_SUBDRV_AUTOSELECT
+	select VIDEO_ADV7180 if MEDIA_SUBDRV_AUTOSELECT
+	select VIDEOBUF2_DMA_CONTIG
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
+	help
+	  Say Y for support for STA2X11 VIP (Video Input Port) capture
+	  device.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sta2x11_vip.
diff --git a/drivers/media/pci/sta2x11/Makefile b/drivers/media/pci/sta2x11/Makefile
new file mode 100644
index 000000000..bb684a7b6
--- /dev/null
+++ b/drivers/media/pci/sta2x11/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_STA2X11_VIP) += sta2x11_vip.o
diff --git a/drivers/media/pci/sta2x11/sta2x11_vip.c b/drivers/media/pci/sta2x11/sta2x11_vip.c
new file mode 100644
index 000000000..336df65c8
--- /dev/null
+++ b/drivers/media/pci/sta2x11/sta2x11_vip.c
@@ -0,0 +1,1274 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * This is the driver for the STA2x11 Video Input Port.
+ *
+ * Copyright (C) 2012       ST Microelectronics
+ *     author: Federico Vaga <federico.vaga@gmail.com>
+ * Copyright (C) 2010       WindRiver Systems, Inc.
+ *     authors: Andreas Kies <andreas.kies@windriver.com>
+ *              Vlad Lungu   <vlad.lungu@windriver.com>
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/videodev2.h>
+#include <linux/kmod.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-fh.h>
+#include <media/v4l2-event.h>
+#include <media/videobuf2-dma-contig.h>
+
+#include "sta2x11_vip.h"
+
+#define DRV_VERSION "1.3"
+
+#ifndef PCI_DEVICE_ID_STMICRO_VIP
+#define PCI_DEVICE_ID_STMICRO_VIP 0xCC0D
+#endif
+
+#define MAX_FRAMES 4
+
+/*Register offsets*/
+#define DVP_CTL		0x00
+#define DVP_TFO		0x04
+#define DVP_TFS		0x08
+#define DVP_BFO		0x0C
+#define DVP_BFS		0x10
+#define DVP_VTP		0x14
+#define DVP_VBP		0x18
+#define DVP_VMP		0x1C
+#define DVP_ITM		0x98
+#define DVP_ITS		0x9C
+#define DVP_STA		0xA0
+#define DVP_HLFLN	0xA8
+#define DVP_RGB		0xC0
+#define DVP_PKZ		0xF0
+
+/*Register fields*/
+#define DVP_CTL_ENA	0x00000001
+#define DVP_CTL_RST	0x80000000
+#define DVP_CTL_DIS	(~0x00040001)
+
+#define DVP_IT_VSB	0x00000008
+#define DVP_IT_VST	0x00000010
+#define DVP_IT_FIFO	0x00000020
+
+#define DVP_HLFLN_SD	0x00000001
+
+#define SAVE_COUNT 8
+#define AUX_COUNT 3
+#define IRQ_COUNT 1
+
+
+struct vip_buffer {
+	struct vb2_v4l2_buffer vb;
+	struct list_head	list;
+	dma_addr_t		dma;
+};
+static inline struct vip_buffer *to_vip_buffer(struct vb2_v4l2_buffer *vb2)
+{
+	return container_of(vb2, struct vip_buffer, vb);
+}
+
+/**
+ * struct sta2x11_vip - All internal data for one instance of device
+ * @v4l2_dev: device registered in v4l layer
+ * @video_dev: properties of our device
+ * @pdev: PCI device
+ * @adapter: contains I2C adapter information
+ * @register_save_area: All relevant register are saved here during suspend
+ * @decoder: contains information about video DAC
+ * @ctrl_hdl: handler for control framework
+ * @format: pixel format, fixed UYVY
+ * @std: video standard (e.g. PAL/NTSC)
+ * @input: input line for video signal ( 0 or 1 )
+ * @disabled: Device is in power down state
+ * @slock: for excluse access of registers
+ * @vb_vidq: queue maintained by videobuf2 layer
+ * @buffer_list: list of buffer in use
+ * @sequence: sequence number of acquired buffer
+ * @active: current active buffer
+ * @lock: used in videobuf2 callback
+ * @v4l_lock: serialize its video4linux ioctls
+ * @tcount: Number of top frames
+ * @bcount: Number of bottom frames
+ * @overflow: Number of FIFO overflows
+ * @iomem: hardware base address
+ * @config: I2C and gpio config from platform
+ *
+ * All non-local data is accessed via this structure.
+ */
+struct sta2x11_vip {
+	struct v4l2_device v4l2_dev;
+	struct video_device video_dev;
+	struct pci_dev *pdev;
+	struct i2c_adapter *adapter;
+	unsigned int register_save_area[IRQ_COUNT + SAVE_COUNT + AUX_COUNT];
+	struct v4l2_subdev *decoder;
+	struct v4l2_ctrl_handler ctrl_hdl;
+
+
+	struct v4l2_pix_format format;
+	v4l2_std_id std;
+	unsigned int input;
+	int disabled;
+	spinlock_t slock;
+
+	struct vb2_queue vb_vidq;
+	struct list_head buffer_list;
+	unsigned int sequence;
+	struct vip_buffer *active; /* current active buffer */
+	spinlock_t lock; /* Used in videobuf2 callback */
+	struct mutex v4l_lock;
+
+	/* Interrupt counters */
+	int tcount, bcount;
+	int overflow;
+
+	void __iomem *iomem;	/* I/O Memory */
+	struct vip_config *config;
+};
+
+static const unsigned int registers_to_save[AUX_COUNT] = {
+	DVP_HLFLN, DVP_RGB, DVP_PKZ
+};
+
+static struct v4l2_pix_format formats_50[] = {
+	{			/*PAL interlaced */
+	 .width = 720,
+	 .height = 576,
+	 .pixelformat = V4L2_PIX_FMT_UYVY,
+	 .field = V4L2_FIELD_INTERLACED,
+	 .bytesperline = 720 * 2,
+	 .sizeimage = 720 * 2 * 576,
+	 .colorspace = V4L2_COLORSPACE_SMPTE170M},
+	{			/*PAL top */
+	 .width = 720,
+	 .height = 288,
+	 .pixelformat = V4L2_PIX_FMT_UYVY,
+	 .field = V4L2_FIELD_TOP,
+	 .bytesperline = 720 * 2,
+	 .sizeimage = 720 * 2 * 288,
+	 .colorspace = V4L2_COLORSPACE_SMPTE170M},
+	{			/*PAL bottom */
+	 .width = 720,
+	 .height = 288,
+	 .pixelformat = V4L2_PIX_FMT_UYVY,
+	 .field = V4L2_FIELD_BOTTOM,
+	 .bytesperline = 720 * 2,
+	 .sizeimage = 720 * 2 * 288,
+	 .colorspace = V4L2_COLORSPACE_SMPTE170M},
+
+};
+
+static struct v4l2_pix_format formats_60[] = {
+	{			/*NTSC interlaced */
+	 .width = 720,
+	 .height = 480,
+	 .pixelformat = V4L2_PIX_FMT_UYVY,
+	 .field = V4L2_FIELD_INTERLACED,
+	 .bytesperline = 720 * 2,
+	 .sizeimage = 720 * 2 * 480,
+	 .colorspace = V4L2_COLORSPACE_SMPTE170M},
+	{			/*NTSC top */
+	 .width = 720,
+	 .height = 240,
+	 .pixelformat = V4L2_PIX_FMT_UYVY,
+	 .field = V4L2_FIELD_TOP,
+	 .bytesperline = 720 * 2,
+	 .sizeimage = 720 * 2 * 240,
+	 .colorspace = V4L2_COLORSPACE_SMPTE170M},
+	{			/*NTSC bottom */
+	 .width = 720,
+	 .height = 240,
+	 .pixelformat = V4L2_PIX_FMT_UYVY,
+	 .field = V4L2_FIELD_BOTTOM,
+	 .bytesperline = 720 * 2,
+	 .sizeimage = 720 * 2 * 240,
+	 .colorspace = V4L2_COLORSPACE_SMPTE170M},
+};
+
+/* Write VIP register */
+static inline void reg_write(struct sta2x11_vip *vip, unsigned int reg, u32 val)
+{
+	iowrite32((val), (vip->iomem)+(reg));
+}
+/* Read VIP register */
+static inline u32 reg_read(struct sta2x11_vip *vip, unsigned int reg)
+{
+	return  ioread32((vip->iomem)+(reg));
+}
+/* Start DMA acquisition */
+static void start_dma(struct sta2x11_vip *vip, struct vip_buffer *vip_buf)
+{
+	unsigned long offset = 0;
+
+	if (vip->format.field == V4L2_FIELD_INTERLACED)
+		offset = vip->format.width * 2;
+
+	spin_lock_irq(&vip->slock);
+	/* Enable acquisition */
+	reg_write(vip, DVP_CTL, reg_read(vip, DVP_CTL) | DVP_CTL_ENA);
+	/* Set Top and Bottom Field memory address */
+	reg_write(vip, DVP_VTP, (u32)vip_buf->dma);
+	reg_write(vip, DVP_VBP, (u32)vip_buf->dma + offset);
+	spin_unlock_irq(&vip->slock);
+}
+
+/* Fetch the next buffer to activate */
+static void vip_active_buf_next(struct sta2x11_vip *vip)
+{
+	/* Get the next buffer */
+	spin_lock(&vip->lock);
+	if (list_empty(&vip->buffer_list)) {/* No available buffer */
+		spin_unlock(&vip->lock);
+		return;
+	}
+	vip->active = list_first_entry(&vip->buffer_list,
+				       struct vip_buffer,
+				       list);
+	/* Reset Top and Bottom counter */
+	vip->tcount = 0;
+	vip->bcount = 0;
+	spin_unlock(&vip->lock);
+	if (vb2_is_streaming(&vip->vb_vidq)) {	/* streaming is on */
+		start_dma(vip, vip->active);	/* start dma capture */
+	}
+}
+
+
+/* Videobuf2 Operations */
+static int queue_setup(struct vb2_queue *vq,
+		       unsigned int *nbuffers, unsigned int *nplanes,
+		       unsigned int sizes[], struct device *alloc_devs[])
+{
+	struct sta2x11_vip *vip = vb2_get_drv_priv(vq);
+
+	if (!(*nbuffers) || *nbuffers < MAX_FRAMES)
+		*nbuffers = MAX_FRAMES;
+
+	*nplanes = 1;
+	sizes[0] = vip->format.sizeimage;
+
+	vip->sequence = 0;
+	vip->active = NULL;
+	vip->tcount = 0;
+	vip->bcount = 0;
+
+	return 0;
+};
+static int buffer_init(struct vb2_buffer *vb)
+{
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct vip_buffer *vip_buf = to_vip_buffer(vbuf);
+
+	vip_buf->dma = vb2_dma_contig_plane_dma_addr(vb, 0);
+	INIT_LIST_HEAD(&vip_buf->list);
+	return 0;
+}
+
+static int buffer_prepare(struct vb2_buffer *vb)
+{
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct sta2x11_vip *vip = vb2_get_drv_priv(vb->vb2_queue);
+	struct vip_buffer *vip_buf = to_vip_buffer(vbuf);
+	unsigned long size;
+
+	size = vip->format.sizeimage;
+	if (vb2_plane_size(vb, 0) < size) {
+		v4l2_err(&vip->v4l2_dev, "buffer too small (%lu < %lu)\n",
+			 vb2_plane_size(vb, 0), size);
+		return -EINVAL;
+	}
+
+	vb2_set_plane_payload(&vip_buf->vb.vb2_buf, 0, size);
+
+	return 0;
+}
+static void buffer_queue(struct vb2_buffer *vb)
+{
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct sta2x11_vip *vip = vb2_get_drv_priv(vb->vb2_queue);
+	struct vip_buffer *vip_buf = to_vip_buffer(vbuf);
+
+	spin_lock(&vip->lock);
+	list_add_tail(&vip_buf->list, &vip->buffer_list);
+	if (!vip->active) {	/* No active buffer, active the first one */
+		vip->active = list_first_entry(&vip->buffer_list,
+					       struct vip_buffer,
+					       list);
+		if (vb2_is_streaming(&vip->vb_vidq))	/* streaming is on */
+			start_dma(vip, vip_buf);	/* start dma capture */
+	}
+	spin_unlock(&vip->lock);
+}
+static void buffer_finish(struct vb2_buffer *vb)
+{
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct sta2x11_vip *vip = vb2_get_drv_priv(vb->vb2_queue);
+	struct vip_buffer *vip_buf = to_vip_buffer(vbuf);
+
+	/* Buffer handled, remove it from the list */
+	spin_lock(&vip->lock);
+	list_del_init(&vip_buf->list);
+	spin_unlock(&vip->lock);
+
+	if (vb2_is_streaming(vb->vb2_queue))
+		vip_active_buf_next(vip);
+}
+
+static int start_streaming(struct vb2_queue *vq, unsigned int count)
+{
+	struct sta2x11_vip *vip = vb2_get_drv_priv(vq);
+
+	spin_lock_irq(&vip->slock);
+	/* Enable interrupt VSYNC Top and Bottom*/
+	reg_write(vip, DVP_ITM, DVP_IT_VSB | DVP_IT_VST);
+	spin_unlock_irq(&vip->slock);
+
+	if (count)
+		start_dma(vip, vip->active);
+
+	return 0;
+}
+
+/* abort streaming and wait for last buffer */
+static void stop_streaming(struct vb2_queue *vq)
+{
+	struct sta2x11_vip *vip = vb2_get_drv_priv(vq);
+	struct vip_buffer *vip_buf, *node;
+
+	/* Disable acquisition */
+	reg_write(vip, DVP_CTL, reg_read(vip, DVP_CTL) & ~DVP_CTL_ENA);
+	/* Disable all interrupts */
+	reg_write(vip, DVP_ITM, 0);
+
+	/* Release all active buffers */
+	spin_lock(&vip->lock);
+	list_for_each_entry_safe(vip_buf, node, &vip->buffer_list, list) {
+		vb2_buffer_done(&vip_buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
+		list_del(&vip_buf->list);
+	}
+	spin_unlock(&vip->lock);
+}
+
+static const struct vb2_ops vip_video_qops = {
+	.queue_setup		= queue_setup,
+	.buf_init		= buffer_init,
+	.buf_prepare		= buffer_prepare,
+	.buf_finish		= buffer_finish,
+	.buf_queue		= buffer_queue,
+	.start_streaming	= start_streaming,
+	.stop_streaming		= stop_streaming,
+	.wait_prepare		= vb2_ops_wait_prepare,
+	.wait_finish		= vb2_ops_wait_finish,
+};
+
+
+/* File Operations */
+static const struct v4l2_file_operations vip_fops = {
+	.owner = THIS_MODULE,
+	.open = v4l2_fh_open,
+	.release = vb2_fop_release,
+	.unlocked_ioctl = video_ioctl2,
+	.read = vb2_fop_read,
+	.mmap = vb2_fop_mmap,
+	.poll = vb2_fop_poll
+};
+
+
+/**
+ * vidioc_querycap - return capabilities of device
+ * @file: descriptor of device
+ * @cap: contains return values
+ * @priv: unused
+ *
+ * the capabilities of the device are returned
+ *
+ * return value: 0, no error.
+ */
+static int vidioc_querycap(struct file *file, void *priv,
+			   struct v4l2_capability *cap)
+{
+	struct sta2x11_vip *vip = video_drvdata(file);
+
+	strscpy(cap->driver, KBUILD_MODNAME, sizeof(cap->driver));
+	strscpy(cap->card, KBUILD_MODNAME, sizeof(cap->card));
+	snprintf(cap->bus_info, sizeof(cap->bus_info), "PCI:%s",
+		 pci_name(vip->pdev));
+	return 0;
+}
+
+/**
+ * vidioc_s_std - set video standard
+ * @file: descriptor of device
+ * @std: contains standard to be set
+ * @priv: unused
+ *
+ * the video standard is set
+ *
+ * return value: 0, no error.
+ *
+ * -EIO, no input signal detected
+ *
+ * other, returned from video DAC.
+ */
+static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id std)
+{
+	struct sta2x11_vip *vip = video_drvdata(file);
+
+	/*
+	 * This is here for backwards compatibility only.
+	 * The use of V4L2_STD_ALL to trigger a querystd is non-standard.
+	 */
+	if (std == V4L2_STD_ALL) {
+		v4l2_subdev_call(vip->decoder, video, querystd, &std);
+		if (std == V4L2_STD_UNKNOWN)
+			return -EIO;
+	}
+
+	if (vip->std != std) {
+		vip->std = std;
+		if (V4L2_STD_525_60 & std)
+			vip->format = formats_60[0];
+		else
+			vip->format = formats_50[0];
+	}
+
+	return v4l2_subdev_call(vip->decoder, video, s_std, std);
+}
+
+/**
+ * vidioc_g_std - get video standard
+ * @file: descriptor of device
+ * @priv: unused
+ * @std: contains return values
+ *
+ * the current video standard is returned
+ *
+ * return value: 0, no error.
+ */
+static int vidioc_g_std(struct file *file, void *priv, v4l2_std_id *std)
+{
+	struct sta2x11_vip *vip = video_drvdata(file);
+
+	*std = vip->std;
+	return 0;
+}
+
+/**
+ * vidioc_querystd - get possible video standards
+ * @file: descriptor of device
+ * @priv: unused
+ * @std: contains return values
+ *
+ * all possible video standards are returned
+ *
+ * return value: delivered by video DAC routine.
+ */
+static int vidioc_querystd(struct file *file, void *priv, v4l2_std_id *std)
+{
+	struct sta2x11_vip *vip = video_drvdata(file);
+
+	return v4l2_subdev_call(vip->decoder, video, querystd, std);
+}
+
+static int vidioc_enum_input(struct file *file, void *priv,
+			     struct v4l2_input *inp)
+{
+	if (inp->index > 1)
+		return -EINVAL;
+
+	inp->type = V4L2_INPUT_TYPE_CAMERA;
+	inp->std = V4L2_STD_ALL;
+	sprintf(inp->name, "Camera %u", inp->index);
+
+	return 0;
+}
+
+/**
+ * vidioc_s_input - set input line
+ * @file: descriptor of device
+ * @priv: unused
+ * @i: new input line number
+ *
+ * the current active input line is set
+ *
+ * return value: 0, no error.
+ *
+ * -EINVAL, line number out of range
+ */
+static int vidioc_s_input(struct file *file, void *priv, unsigned int i)
+{
+	struct sta2x11_vip *vip = video_drvdata(file);
+	int ret;
+
+	if (i > 1)
+		return -EINVAL;
+	ret = v4l2_subdev_call(vip->decoder, video, s_routing, i, 0, 0);
+
+	if (!ret)
+		vip->input = i;
+
+	return 0;
+}
+
+/**
+ * vidioc_g_input - return input line
+ * @file: descriptor of device
+ * @priv: unused
+ * @i: returned input line number
+ *
+ * the current active input line is returned
+ *
+ * return value: always 0.
+ */
+static int vidioc_g_input(struct file *file, void *priv, unsigned int *i)
+{
+	struct sta2x11_vip *vip = video_drvdata(file);
+
+	*i = vip->input;
+	return 0;
+}
+
+/**
+ * vidioc_enum_fmt_vid_cap - return video capture format
+ * @file: descriptor of device
+ * @priv: unused
+ * @f: returned format information
+ *
+ * returns name and format of video capture
+ * Only UYVY is supported by hardware.
+ *
+ * return value: always 0.
+ */
+static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv,
+				   struct v4l2_fmtdesc *f)
+{
+
+	if (f->index != 0)
+		return -EINVAL;
+
+	f->pixelformat = V4L2_PIX_FMT_UYVY;
+	return 0;
+}
+
+/**
+ * vidioc_try_fmt_vid_cap - set video capture format
+ * @file: descriptor of device
+ * @priv: unused
+ * @f: new format
+ *
+ * new video format is set which includes width and
+ * field type. width is fixed to 720, no scaling.
+ * Only UYVY is supported by this hardware.
+ * the minimum height is 200, the maximum is 576 (PAL)
+ *
+ * return value: 0, no error
+ *
+ * -EINVAL, pixel or field format not supported
+ *
+ */
+static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
+				  struct v4l2_format *f)
+{
+	struct sta2x11_vip *vip = video_drvdata(file);
+	int interlace_lim;
+
+	if (V4L2_PIX_FMT_UYVY != f->fmt.pix.pixelformat) {
+		v4l2_warn(&vip->v4l2_dev, "Invalid format, only UYVY supported\n");
+		return -EINVAL;
+	}
+
+	if (V4L2_STD_525_60 & vip->std)
+		interlace_lim = 240;
+	else
+		interlace_lim = 288;
+
+	switch (f->fmt.pix.field) {
+	default:
+	case V4L2_FIELD_ANY:
+		if (interlace_lim < f->fmt.pix.height)
+			f->fmt.pix.field = V4L2_FIELD_INTERLACED;
+		else
+			f->fmt.pix.field = V4L2_FIELD_BOTTOM;
+		break;
+	case V4L2_FIELD_TOP:
+	case V4L2_FIELD_BOTTOM:
+		if (interlace_lim < f->fmt.pix.height)
+			f->fmt.pix.height = interlace_lim;
+		break;
+	case V4L2_FIELD_INTERLACED:
+		break;
+	}
+
+	/* It is the only supported format */
+	f->fmt.pix.pixelformat = V4L2_PIX_FMT_UYVY;
+	f->fmt.pix.height &= ~1;
+	if (2 * interlace_lim < f->fmt.pix.height)
+		f->fmt.pix.height = 2 * interlace_lim;
+	if (200 > f->fmt.pix.height)
+		f->fmt.pix.height = 200;
+	f->fmt.pix.width = 720;
+	f->fmt.pix.bytesperline = f->fmt.pix.width * 2;
+	f->fmt.pix.sizeimage = f->fmt.pix.width * 2 * f->fmt.pix.height;
+	f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
+	return 0;
+}
+
+/**
+ * vidioc_s_fmt_vid_cap - set current video format parameters
+ * @file: descriptor of device
+ * @priv: unused
+ * @f: returned format information
+ *
+ * set new capture format
+ * return value: 0, no error
+ *
+ * other, delivered by video DAC routine.
+ */
+static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
+				struct v4l2_format *f)
+{
+	struct sta2x11_vip *vip = video_drvdata(file);
+	unsigned int t_stop, b_stop, pitch;
+	int ret;
+
+	ret = vidioc_try_fmt_vid_cap(file, priv, f);
+	if (ret)
+		return ret;
+
+	if (vb2_is_busy(&vip->vb_vidq)) {
+		/* Can't change format during acquisition */
+		v4l2_err(&vip->v4l2_dev, "device busy\n");
+		return -EBUSY;
+	}
+	vip->format = f->fmt.pix;
+	switch (vip->format.field) {
+	case V4L2_FIELD_INTERLACED:
+		t_stop = ((vip->format.height / 2 - 1) << 16) |
+			 (2 * vip->format.width - 1);
+		b_stop = t_stop;
+		pitch = 4 * vip->format.width;
+		break;
+	case V4L2_FIELD_TOP:
+		t_stop = ((vip->format.height - 1) << 16) |
+			 (2 * vip->format.width - 1);
+		b_stop = (0 << 16) | (2 * vip->format.width - 1);
+		pitch = 2 * vip->format.width;
+		break;
+	case V4L2_FIELD_BOTTOM:
+		t_stop = (0 << 16) | (2 * vip->format.width - 1);
+		b_stop = (vip->format.height << 16) |
+			 (2 * vip->format.width - 1);
+		pitch = 2 * vip->format.width;
+		break;
+	default:
+		v4l2_err(&vip->v4l2_dev, "unknown field format\n");
+		return -EINVAL;
+	}
+
+	spin_lock_irq(&vip->slock);
+	/* Y-X Top Field Offset */
+	reg_write(vip, DVP_TFO, 0);
+	/* Y-X Bottom Field Offset */
+	reg_write(vip, DVP_BFO, 0);
+	/* Y-X Top Field Stop*/
+	reg_write(vip, DVP_TFS, t_stop);
+	/* Y-X Bottom Field Stop */
+	reg_write(vip, DVP_BFS, b_stop);
+	/* Video Memory Pitch */
+	reg_write(vip, DVP_VMP, pitch);
+	spin_unlock_irq(&vip->slock);
+
+	return 0;
+}
+
+/**
+ * vidioc_g_fmt_vid_cap - get current video format parameters
+ * @file: descriptor of device
+ * @priv: unused
+ * @f: contains format information
+ *
+ * returns current video format parameters
+ *
+ * return value: 0, always successful
+ */
+static int vidioc_g_fmt_vid_cap(struct file *file, void *priv,
+				struct v4l2_format *f)
+{
+	struct sta2x11_vip *vip = video_drvdata(file);
+
+	f->fmt.pix = vip->format;
+
+	return 0;
+}
+
+static const struct v4l2_ioctl_ops vip_ioctl_ops = {
+	.vidioc_querycap = vidioc_querycap,
+	/* FMT handling */
+	.vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap,
+	.vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap,
+	.vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap,
+	.vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap,
+	/* Buffer handlers */
+	.vidioc_create_bufs = vb2_ioctl_create_bufs,
+	.vidioc_prepare_buf = vb2_ioctl_prepare_buf,
+	.vidioc_reqbufs = vb2_ioctl_reqbufs,
+	.vidioc_querybuf = vb2_ioctl_querybuf,
+	.vidioc_qbuf = vb2_ioctl_qbuf,
+	.vidioc_dqbuf = vb2_ioctl_dqbuf,
+	/* Stream on/off */
+	.vidioc_streamon = vb2_ioctl_streamon,
+	.vidioc_streamoff = vb2_ioctl_streamoff,
+	/* Standard handling */
+	.vidioc_g_std = vidioc_g_std,
+	.vidioc_s_std = vidioc_s_std,
+	.vidioc_querystd = vidioc_querystd,
+	/* Input handling */
+	.vidioc_enum_input = vidioc_enum_input,
+	.vidioc_g_input = vidioc_g_input,
+	.vidioc_s_input = vidioc_s_input,
+	/* Log status ioctl */
+	.vidioc_log_status = v4l2_ctrl_log_status,
+	/* Event handling */
+	.vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
+	.vidioc_unsubscribe_event = v4l2_event_unsubscribe,
+};
+
+static const struct video_device video_dev_template = {
+	.name = KBUILD_MODNAME,
+	.release = video_device_release_empty,
+	.fops = &vip_fops,
+	.ioctl_ops = &vip_ioctl_ops,
+	.tvnorms = V4L2_STD_ALL,
+	.device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE |
+		       V4L2_CAP_STREAMING,
+};
+
+/**
+ * vip_irq - interrupt routine
+ * @irq: Number of interrupt ( not used, correct number is assumed )
+ * @vip: local data structure containing all information
+ *
+ * check for both frame interrupts set ( top and bottom ).
+ * check FIFO overflow, but limit number of log messages after open.
+ * signal a complete buffer if done
+ *
+ * return value: IRQ_NONE, interrupt was not generated by VIP
+ *
+ * IRQ_HANDLED, interrupt done.
+ */
+static irqreturn_t vip_irq(int irq, struct sta2x11_vip *vip)
+{
+	unsigned int status;
+
+	status = reg_read(vip, DVP_ITS);
+
+	if (!status)		/* No interrupt to handle */
+		return IRQ_NONE;
+
+	if (status & DVP_IT_FIFO)
+		if (vip->overflow++ > 5)
+			pr_info("VIP: fifo overflow\n");
+
+	if ((status & DVP_IT_VST) && (status & DVP_IT_VSB)) {
+		/* this is bad, we are too slow, hope the condition is gone
+		 * on the next frame */
+		return IRQ_HANDLED;
+	}
+
+	if (status & DVP_IT_VST)
+		if ((++vip->tcount) < 2)
+			return IRQ_HANDLED;
+	if (status & DVP_IT_VSB) {
+		vip->bcount++;
+		return IRQ_HANDLED;
+	}
+
+	if (vip->active) { /* Acquisition is over on this buffer */
+		/* Disable acquisition */
+		reg_write(vip, DVP_CTL, reg_read(vip, DVP_CTL) & ~DVP_CTL_ENA);
+		/* Remove the active buffer from the list */
+		vip->active->vb.vb2_buf.timestamp = ktime_get_ns();
+		vip->active->vb.sequence = vip->sequence++;
+		vb2_buffer_done(&vip->active->vb.vb2_buf, VB2_BUF_STATE_DONE);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void sta2x11_vip_init_register(struct sta2x11_vip *vip)
+{
+	/* Register initialization */
+	spin_lock_irq(&vip->slock);
+	/* Clean interrupt */
+	reg_read(vip, DVP_ITS);
+	/* Enable Half Line per vertical */
+	reg_write(vip, DVP_HLFLN, DVP_HLFLN_SD);
+	/* Reset VIP control */
+	reg_write(vip, DVP_CTL, DVP_CTL_RST);
+	/* Clear VIP control */
+	reg_write(vip, DVP_CTL, 0);
+	spin_unlock_irq(&vip->slock);
+}
+static void sta2x11_vip_clear_register(struct sta2x11_vip *vip)
+{
+	spin_lock_irq(&vip->slock);
+	/* Disable interrupt */
+	reg_write(vip, DVP_ITM, 0);
+	/* Reset VIP Control */
+	reg_write(vip, DVP_CTL, DVP_CTL_RST);
+	/* Clear VIP Control */
+	reg_write(vip, DVP_CTL, 0);
+	/* Clean VIP Interrupt */
+	reg_read(vip, DVP_ITS);
+	spin_unlock_irq(&vip->slock);
+}
+static int sta2x11_vip_init_buffer(struct sta2x11_vip *vip)
+{
+	int err;
+
+	err = dma_set_coherent_mask(&vip->pdev->dev, DMA_BIT_MASK(29));
+	if (err) {
+		v4l2_err(&vip->v4l2_dev, "Cannot configure coherent mask");
+		return err;
+	}
+	memset(&vip->vb_vidq, 0, sizeof(struct vb2_queue));
+	vip->vb_vidq.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	vip->vb_vidq.io_modes = VB2_MMAP | VB2_READ;
+	vip->vb_vidq.drv_priv = vip;
+	vip->vb_vidq.buf_struct_size = sizeof(struct vip_buffer);
+	vip->vb_vidq.ops = &vip_video_qops;
+	vip->vb_vidq.mem_ops = &vb2_dma_contig_memops;
+	vip->vb_vidq.timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
+	vip->vb_vidq.dev = &vip->pdev->dev;
+	vip->vb_vidq.lock = &vip->v4l_lock;
+	err = vb2_queue_init(&vip->vb_vidq);
+	if (err)
+		return err;
+	INIT_LIST_HEAD(&vip->buffer_list);
+	spin_lock_init(&vip->lock);
+	return 0;
+}
+
+static int sta2x11_vip_init_controls(struct sta2x11_vip *vip)
+{
+	/*
+	 * Inititialize an empty control so VIP can inerithing controls
+	 * from ADV7180
+	 */
+	v4l2_ctrl_handler_init(&vip->ctrl_hdl, 0);
+
+	vip->v4l2_dev.ctrl_handler = &vip->ctrl_hdl;
+	if (vip->ctrl_hdl.error) {
+		int err = vip->ctrl_hdl.error;
+
+		v4l2_ctrl_handler_free(&vip->ctrl_hdl);
+		return err;
+	}
+
+	return 0;
+}
+
+/**
+ * vip_gpio_reserve - reserve gpio pin
+ * @dev: device
+ * @pin: GPIO pin number
+ * @dir: direction, input or output
+ * @name: GPIO pin name
+ *
+ */
+static int vip_gpio_reserve(struct device *dev, int pin, int dir,
+			    const char *name)
+{
+	int ret = -ENODEV;
+
+	if (!gpio_is_valid(pin))
+		return ret;
+
+	ret = gpio_request(pin, name);
+	if (ret) {
+		dev_err(dev, "Failed to allocate pin %d (%s)\n", pin, name);
+		return ret;
+	}
+
+	ret = gpio_direction_output(pin, dir);
+	if (ret) {
+		dev_err(dev, "Failed to set direction for pin %d (%s)\n",
+			pin, name);
+		gpio_free(pin);
+		return ret;
+	}
+
+	ret = gpio_export(pin, false);
+	if (ret) {
+		dev_err(dev, "Failed to export pin %d (%s)\n", pin, name);
+		gpio_free(pin);
+		return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * vip_gpio_release - release gpio pin
+ * @dev: device
+ * @pin: GPIO pin number
+ * @name: GPIO pin name
+ *
+ */
+static void vip_gpio_release(struct device *dev, int pin, const char *name)
+{
+	if (gpio_is_valid(pin)) {
+		dev_dbg(dev, "releasing pin %d (%s)\n",	pin, name);
+		gpio_unexport(pin);
+		gpio_free(pin);
+	}
+}
+
+/**
+ * sta2x11_vip_init_one - init one instance of video device
+ * @pdev: PCI device
+ * @ent: (not used)
+ *
+ * allocate reset pins for DAC.
+ * Reset video DAC, this is done via reset line.
+ * allocate memory for managing device
+ * request interrupt
+ * map IO region
+ * register device
+ * find and initialize video DAC
+ *
+ * return value: 0, no error
+ *
+ * -ENOMEM, no memory
+ *
+ * -ENODEV, device could not be detected or registered
+ */
+static int sta2x11_vip_init_one(struct pci_dev *pdev,
+				const struct pci_device_id *ent)
+{
+	int ret;
+	struct sta2x11_vip *vip;
+	struct vip_config *config;
+
+	/* Check if hardware support 26-bit DMA */
+	if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(26))) {
+		dev_err(&pdev->dev, "26-bit DMA addressing not available\n");
+		return -EINVAL;
+	}
+	/* Enable PCI */
+	ret = pci_enable_device(pdev);
+	if (ret)
+		return ret;
+
+	/* Get VIP platform data */
+	config = dev_get_platdata(&pdev->dev);
+	if (!config) {
+		dev_info(&pdev->dev, "VIP slot disabled\n");
+		ret = -EINVAL;
+		goto disable;
+	}
+
+	/* Power configuration */
+	ret = vip_gpio_reserve(&pdev->dev, config->pwr_pin, 0,
+			       config->pwr_name);
+	if (ret)
+		goto disable;
+
+	ret = vip_gpio_reserve(&pdev->dev, config->reset_pin, 0,
+			       config->reset_name);
+	if (ret) {
+		vip_gpio_release(&pdev->dev, config->pwr_pin,
+				 config->pwr_name);
+		goto disable;
+	}
+
+	if (gpio_is_valid(config->pwr_pin)) {
+		/* Datasheet says 5ms between PWR and RST */
+		usleep_range(5000, 25000);
+		gpio_direction_output(config->pwr_pin, 1);
+	}
+
+	if (gpio_is_valid(config->reset_pin)) {
+		/* Datasheet says 5ms between PWR and RST */
+		usleep_range(5000, 25000);
+		gpio_direction_output(config->reset_pin, 1);
+	}
+	usleep_range(5000, 25000);
+
+	/* Allocate a new VIP instance */
+	vip = kzalloc(sizeof(struct sta2x11_vip), GFP_KERNEL);
+	if (!vip) {
+		ret = -ENOMEM;
+		goto release_gpios;
+	}
+	vip->pdev = pdev;
+	vip->std = V4L2_STD_PAL;
+	vip->format = formats_50[0];
+	vip->config = config;
+	mutex_init(&vip->v4l_lock);
+
+	ret = sta2x11_vip_init_controls(vip);
+	if (ret)
+		goto free_mem;
+	ret = v4l2_device_register(&pdev->dev, &vip->v4l2_dev);
+	if (ret)
+		goto free_mem;
+
+	dev_dbg(&pdev->dev, "BAR #0 at 0x%lx 0x%lx irq %d\n",
+		(unsigned long)pci_resource_start(pdev, 0),
+		(unsigned long)pci_resource_len(pdev, 0), pdev->irq);
+
+	pci_set_master(pdev);
+
+	ret = pci_request_regions(pdev, KBUILD_MODNAME);
+	if (ret)
+		goto unreg;
+
+	vip->iomem = pci_iomap(pdev, 0, 0x100);
+	if (!vip->iomem) {
+		ret = -ENOMEM;
+		goto release;
+	}
+
+	pci_enable_msi(pdev);
+
+	/* Initialize buffer */
+	ret = sta2x11_vip_init_buffer(vip);
+	if (ret)
+		goto unmap;
+
+	spin_lock_init(&vip->slock);
+
+	ret = request_irq(pdev->irq,
+			  (irq_handler_t) vip_irq,
+			  IRQF_SHARED, KBUILD_MODNAME, vip);
+	if (ret) {
+		dev_err(&pdev->dev, "request_irq failed\n");
+		ret = -ENODEV;
+		goto release_buf;
+	}
+
+	/* Initialize and register video device */
+	vip->video_dev = video_dev_template;
+	vip->video_dev.v4l2_dev = &vip->v4l2_dev;
+	vip->video_dev.queue = &vip->vb_vidq;
+	vip->video_dev.lock = &vip->v4l_lock;
+	video_set_drvdata(&vip->video_dev, vip);
+
+	ret = video_register_device(&vip->video_dev, VFL_TYPE_VIDEO, -1);
+	if (ret)
+		goto vrelease;
+
+	/* Get ADV7180 subdevice */
+	vip->adapter = i2c_get_adapter(vip->config->i2c_id);
+	if (!vip->adapter) {
+		ret = -ENODEV;
+		dev_err(&pdev->dev, "no I2C adapter found\n");
+		goto vunreg;
+	}
+
+	vip->decoder = v4l2_i2c_new_subdev(&vip->v4l2_dev, vip->adapter,
+					   "adv7180", vip->config->i2c_addr,
+					   NULL);
+	if (!vip->decoder) {
+		ret = -ENODEV;
+		dev_err(&pdev->dev, "no decoder found\n");
+		goto vunreg;
+	}
+
+	i2c_put_adapter(vip->adapter);
+	v4l2_subdev_call(vip->decoder, core, init, 0);
+
+	sta2x11_vip_init_register(vip);
+
+	dev_info(&pdev->dev, "STA2X11 Video Input Port (VIP) loaded\n");
+	return 0;
+
+vunreg:
+	video_set_drvdata(&vip->video_dev, NULL);
+vrelease:
+	vb2_video_unregister_device(&vip->video_dev);
+	free_irq(pdev->irq, vip);
+release_buf:
+	pci_disable_msi(pdev);
+unmap:
+	pci_iounmap(pdev, vip->iomem);
+release:
+	pci_release_regions(pdev);
+unreg:
+	v4l2_device_unregister(&vip->v4l2_dev);
+free_mem:
+	kfree(vip);
+release_gpios:
+	vip_gpio_release(&pdev->dev, config->reset_pin, config->reset_name);
+	vip_gpio_release(&pdev->dev, config->pwr_pin, config->pwr_name);
+disable:
+	/*
+	 * do not call pci_disable_device on sta2x11 because it break all
+	 * other Bus masters on this EP
+	 */
+	return ret;
+}
+
+/**
+ * sta2x11_vip_remove_one - release device
+ * @pdev: PCI device
+ *
+ * Undo everything done in .._init_one
+ *
+ * unregister video device
+ * free interrupt
+ * unmap ioadresses
+ * free memory
+ * free GPIO pins
+ */
+static void sta2x11_vip_remove_one(struct pci_dev *pdev)
+{
+	struct v4l2_device *v4l2_dev = pci_get_drvdata(pdev);
+	struct sta2x11_vip *vip =
+	    container_of(v4l2_dev, struct sta2x11_vip, v4l2_dev);
+
+	sta2x11_vip_clear_register(vip);
+
+	video_set_drvdata(&vip->video_dev, NULL);
+	vb2_video_unregister_device(&vip->video_dev);
+	free_irq(pdev->irq, vip);
+	pci_disable_msi(pdev);
+	pci_iounmap(pdev, vip->iomem);
+	pci_release_regions(pdev);
+
+	v4l2_device_unregister(&vip->v4l2_dev);
+
+	vip_gpio_release(&pdev->dev, vip->config->pwr_pin,
+			 vip->config->pwr_name);
+	vip_gpio_release(&pdev->dev, vip->config->reset_pin,
+			 vip->config->reset_name);
+
+	kfree(vip);
+	/*
+	 * do not call pci_disable_device on sta2x11 because it break all
+	 * other Bus masters on this EP
+	 */
+}
+
+/**
+ * sta2x11_vip_suspend - set device into power save mode
+ * @dev_d: PCI device
+ *
+ * all relevant registers are saved and an attempt to set a new state is made.
+ *
+ * return value: 0 always indicate success,
+ * even if device could not be disabled. (workaround for hardware problem)
+ */
+static int __maybe_unused sta2x11_vip_suspend(struct device *dev_d)
+{
+	struct v4l2_device *v4l2_dev = dev_get_drvdata(dev_d);
+	struct sta2x11_vip *vip =
+	    container_of(v4l2_dev, struct sta2x11_vip, v4l2_dev);
+	unsigned long flags;
+	int i;
+
+	spin_lock_irqsave(&vip->slock, flags);
+	vip->register_save_area[0] = reg_read(vip, DVP_CTL);
+	reg_write(vip, DVP_CTL, vip->register_save_area[0] & DVP_CTL_DIS);
+	vip->register_save_area[SAVE_COUNT] = reg_read(vip, DVP_ITM);
+	reg_write(vip, DVP_ITM, 0);
+	for (i = 1; i < SAVE_COUNT; i++)
+		vip->register_save_area[i] = reg_read(vip, 4 * i);
+	for (i = 0; i < AUX_COUNT; i++)
+		vip->register_save_area[SAVE_COUNT + IRQ_COUNT + i] =
+		    reg_read(vip, registers_to_save[i]);
+	spin_unlock_irqrestore(&vip->slock, flags);
+
+	vip->disabled = 1;
+
+	pr_info("VIP: suspend\n");
+	return 0;
+}
+
+/**
+ * sta2x11_vip_resume - resume device operation
+ * @dev_d : PCI device
+ *
+ * return value: 0, no error.
+ *
+ * other, could not set device to power on state.
+ */
+static int __maybe_unused sta2x11_vip_resume(struct device *dev_d)
+{
+	struct v4l2_device *v4l2_dev = dev_get_drvdata(dev_d);
+	struct sta2x11_vip *vip =
+	    container_of(v4l2_dev, struct sta2x11_vip, v4l2_dev);
+	unsigned long flags;
+	int i;
+
+	pr_info("VIP: resume\n");
+
+	vip->disabled = 0;
+
+	spin_lock_irqsave(&vip->slock, flags);
+	for (i = 1; i < SAVE_COUNT; i++)
+		reg_write(vip, 4 * i, vip->register_save_area[i]);
+	for (i = 0; i < AUX_COUNT; i++)
+		reg_write(vip, registers_to_save[i],
+			  vip->register_save_area[SAVE_COUNT + IRQ_COUNT + i]);
+	reg_write(vip, DVP_CTL, vip->register_save_area[0]);
+	reg_write(vip, DVP_ITM, vip->register_save_area[SAVE_COUNT]);
+	spin_unlock_irqrestore(&vip->slock, flags);
+	return 0;
+}
+
+static const struct pci_device_id sta2x11_vip_pci_tbl[] = {
+	{PCI_DEVICE(PCI_VENDOR_ID_STMICRO, PCI_DEVICE_ID_STMICRO_VIP)},
+	{0,}
+};
+
+static SIMPLE_DEV_PM_OPS(sta2x11_vip_pm_ops,
+			 sta2x11_vip_suspend,
+			 sta2x11_vip_resume);
+
+static struct pci_driver sta2x11_vip_driver = {
+	.name = KBUILD_MODNAME,
+	.probe = sta2x11_vip_init_one,
+	.remove = sta2x11_vip_remove_one,
+	.id_table = sta2x11_vip_pci_tbl,
+	.driver.pm = &sta2x11_vip_pm_ops,
+};
+
+static int __init sta2x11_vip_init_module(void)
+{
+	return pci_register_driver(&sta2x11_vip_driver);
+}
+
+static void __exit sta2x11_vip_exit_module(void)
+{
+	pci_unregister_driver(&sta2x11_vip_driver);
+}
+
+#ifdef MODULE
+module_init(sta2x11_vip_init_module);
+module_exit(sta2x11_vip_exit_module);
+#else
+late_initcall_sync(sta2x11_vip_init_module);
+#endif
+
+MODULE_DESCRIPTION("STA2X11 Video Input Port driver");
+MODULE_AUTHOR("Wind River");
+MODULE_LICENSE("GPL v2");
+MODULE_SUPPORTED_DEVICE("sta2x11 video input");
+MODULE_VERSION(DRV_VERSION);
+MODULE_DEVICE_TABLE(pci, sta2x11_vip_pci_tbl);
diff --git a/drivers/media/pci/sta2x11/sta2x11_vip.h b/drivers/media/pci/sta2x11/sta2x11_vip.h
new file mode 100644
index 000000000..a8cf140a0
--- /dev/null
+++ b/drivers/media/pci/sta2x11/sta2x11_vip.h
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2011 Wind River Systems, Inc.
+ *
+ * Author:  Anders Wallin <anders.wallin@windriver.com>
+ */
+
+#ifndef __STA2X11_VIP_H
+#define __STA2X11_VIP_H
+
+/**
+ * struct vip_config - video input configuration data
+ * @pwr_name: ADV powerdown name
+ * @pwr_pin: ADV powerdown pin
+ * @reset_name: ADV reset name
+ * @reset_pin: ADV reset pin
+ */
+struct vip_config {
+	const char *pwr_name;
+	int pwr_pin;
+	const char *reset_name;
+	int reset_pin;
+	int i2c_id;
+	int i2c_addr;
+};
+
+#endif /* __STA2X11_VIP_H */