Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 496 insertions, 0 deletions

diff --git a/drivers/media/pci/ttpci/av7110_hw.h b/drivers/media/pci/ttpci/av7110_hw.h
new file mode 100644
index 000000000..6380d8950
--- /dev/null
+++ b/drivers/media/pci/ttpci/av7110_hw.h
@@ -0,0 +1,496 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _AV7110_HW_H_
+#define _AV7110_HW_H_
+
+#include "av7110.h"
+
+/* DEBI transfer mode defs */
+
+#define DEBINOSWAP 0x000e0000
+#define DEBISWAB   0x001e0000
+#define DEBISWAP   0x002e0000
+
+#define ARM_WAIT_FREE  (HZ)
+#define ARM_WAIT_SHAKE (HZ/5)
+#define ARM_WAIT_OSD (HZ)
+
+
+enum av7110_bootstate
+{
+	BOOTSTATE_BUFFER_EMPTY	= 0,
+	BOOTSTATE_BUFFER_FULL	= 1,
+	BOOTSTATE_AV7110_BOOT_COMPLETE	= 2
+};
+
+enum av7110_type_rec_play_format
+{	RP_None,
+	AudioPES,
+	AudioMp2,
+	AudioPCM,
+	VideoPES,
+	AV_PES
+};
+
+enum av7110_osd_palette_type
+{
+	NoPalet =  0,	   /* No palette */
+	Pal1Bit =  2,	   /* 2 colors for 1 Bit Palette    */
+	Pal2Bit =  4,	   /* 4 colors for 2 bit palette    */
+	Pal4Bit =  16,	   /* 16 colors for 4 bit palette   */
+	Pal8Bit =  256	   /* 256 colors for 16 bit palette */
+};
+
+/* switch defines */
+#define SB_GPIO 3
+#define SB_OFF	SAA7146_GPIO_OUTLO  /* SlowBlank off (TV-Mode) */
+#define SB_ON	SAA7146_GPIO_INPUT  /* SlowBlank on  (AV-Mode) */
+#define SB_WIDE SAA7146_GPIO_OUTHI  /* SlowBlank 6V  (16/9-Mode) (not implemented) */
+
+#define FB_GPIO 1
+#define FB_OFF	SAA7146_GPIO_LO     /* FastBlank off (CVBS-Mode) */
+#define FB_ON	SAA7146_GPIO_OUTHI  /* FastBlank on  (RGB-Mode) */
+#define FB_LOOP	SAA7146_GPIO_INPUT  /* FastBlank loop-through (PC graphics ???) */
+
+enum av7110_video_output_mode
+{
+	NO_OUT	     = 0,		/* disable analog output */
+	CVBS_RGB_OUT = 1,
+	CVBS_YC_OUT  = 2,
+	YC_OUT	     = 3
+};
+
+/* firmware internal msg q status: */
+#define GPMQFull	0x0001		/* Main Message Queue Full */
+#define GPMQOver	0x0002		/* Main Message Queue Overflow */
+#define HPQFull		0x0004		/* High Priority Msg Queue Full */
+#define HPQOver		0x0008
+#define OSDQFull	0x0010		/* OSD Queue Full */
+#define OSDQOver	0x0020
+#define GPMQBusy	0x0040		/* Queue not empty, FW >= 261d */
+#define HPQBusy		0x0080
+#define OSDQBusy	0x0100
+
+/* hw section filter flags */
+#define	SECTION_EIT		0x01
+#define	SECTION_SINGLE		0x00
+#define	SECTION_CYCLE		0x02
+#define	SECTION_CONTINUOS	0x04
+#define	SECTION_MODE		0x06
+#define SECTION_IPMPE		0x0C	/* size up to 4k */
+#define SECTION_HIGH_SPEED	0x1C	/* larger buffer */
+#define DATA_PIPING_FLAG	0x20	/* for Data Piping Filter */
+
+#define	PBUFSIZE_NONE 0x0000
+#define	PBUFSIZE_1P   0x0100
+#define	PBUFSIZE_2P   0x0200
+#define	PBUFSIZE_1K   0x0300
+#define	PBUFSIZE_2K   0x0400
+#define	PBUFSIZE_4K   0x0500
+#define	PBUFSIZE_8K   0x0600
+#define PBUFSIZE_16K  0x0700
+#define PBUFSIZE_32K  0x0800
+
+
+/* firmware command codes */
+enum av7110_osd_command {
+	WCreate,
+	WDestroy,
+	WMoveD,
+	WMoveA,
+	WHide,
+	WTop,
+	DBox,
+	DLine,
+	DText,
+	Set_Font,
+	SetColor,
+	SetBlend,
+	SetWBlend,
+	SetCBlend,
+	SetNonBlend,
+	LoadBmp,
+	BlitBmp,
+	ReleaseBmp,
+	SetWTrans,
+	SetWNoTrans,
+	Set_Palette
+};
+
+enum av7110_pid_command {
+	MultiPID,
+	VideoPID,
+	AudioPID,
+	InitFilt,
+	FiltError,
+	NewVersion,
+	CacheError,
+	AddPIDFilter,
+	DelPIDFilter,
+	Scan,
+	SetDescr,
+	SetIR,
+	FlushTSQueue
+};
+
+enum av7110_mpeg_command {
+	SelAudChannels
+};
+
+enum av7110_audio_command {
+	AudioDAC,
+	CabADAC,
+	ON22K,
+	OFF22K,
+	MainSwitch,
+	ADSwitch,
+	SendDiSEqC,
+	SetRegister,
+	SpdifSwitch
+};
+
+enum av7110_request_command {
+	AudioState,
+	AudioBuffState,
+	VideoState1,
+	VideoState2,
+	VideoState3,
+	CrashCounter,
+	ReqVersion,
+	ReqVCXO,
+	ReqRegister,
+	ReqSecFilterError,
+	ReqSTC
+};
+
+enum av7110_encoder_command {
+	SetVidMode,
+	SetTestMode,
+	LoadVidCode,
+	SetMonitorType,
+	SetPanScanType,
+	SetFreezeMode,
+	SetWSSConfig
+};
+
+enum av7110_rec_play_state {
+	__Record,
+	__Stop,
+	__Play,
+	__Pause,
+	__Slow,
+	__FF_IP,
+	__Scan_I,
+	__Continue
+};
+
+enum av7110_fw_cmd_misc {
+	AV7110_FW_VIDEO_ZOOM = 1,
+	AV7110_FW_VIDEO_COMMAND,
+	AV7110_FW_AUDIO_COMMAND
+};
+
+enum av7110_command_type {
+	COMTYPE_NOCOM,
+	COMTYPE_PIDFILTER,
+	COMTYPE_MPEGDECODER,
+	COMTYPE_OSD,
+	COMTYPE_BMP,
+	COMTYPE_ENCODER,
+	COMTYPE_AUDIODAC,
+	COMTYPE_REQUEST,
+	COMTYPE_SYSTEM,
+	COMTYPE_REC_PLAY,
+	COMTYPE_COMMON_IF,
+	COMTYPE_PID_FILTER,
+	COMTYPE_PES,
+	COMTYPE_TS,
+	COMTYPE_VIDEO,
+	COMTYPE_AUDIO,
+	COMTYPE_CI_LL,
+	COMTYPE_MISC = 0x80
+};
+
+#define VID_NONE_PREF		0x00	/* No aspect ration processing preferred */
+#define VID_PAN_SCAN_PREF	0x01	/* Pan and Scan Display preferred */
+#define VID_VERT_COMP_PREF	0x02	/* Vertical compression display preferred */
+#define VID_VC_AND_PS_PREF	0x03	/* PanScan and vertical Compression if allowed */
+#define VID_CENTRE_CUT_PREF	0x05	/* PanScan with zero vector */
+
+/* MPEG video decoder commands */
+#define AV_VIDEO_CMD_STOP	0x000e
+#define AV_VIDEO_CMD_PLAY	0x000d
+#define AV_VIDEO_CMD_FREEZE	0x0102
+#define AV_VIDEO_CMD_FFWD	0x0016
+#define AV_VIDEO_CMD_SLOW	0x0022
+
+/* MPEG audio decoder commands */
+#define AUDIO_CMD_MUTE		0x0001
+#define AUDIO_CMD_UNMUTE	0x0002
+#define AUDIO_CMD_PCM16		0x0010
+#define AUDIO_CMD_STEREO	0x0080
+#define AUDIO_CMD_MONO_L	0x0100
+#define AUDIO_CMD_MONO_R	0x0200
+#define AUDIO_CMD_SYNC_OFF	0x000e
+#define AUDIO_CMD_SYNC_ON	0x000f
+
+/* firmware data interface codes */
+#define DATA_NONE		 0x00
+#define DATA_FSECTION		 0x01
+#define DATA_IPMPE		 0x02
+#define DATA_MPEG_RECORD	 0x03
+#define DATA_DEBUG_MESSAGE	 0x04
+#define DATA_COMMON_INTERFACE	 0x05
+#define DATA_MPEG_PLAY		 0x06
+#define DATA_BMP_LOAD		 0x07
+#define DATA_IRCOMMAND		 0x08
+#define DATA_PIPING		 0x09
+#define DATA_STREAMING		 0x0a
+#define DATA_CI_GET		 0x0b
+#define DATA_CI_PUT		 0x0c
+#define DATA_MPEG_VIDEO_EVENT	 0x0d
+
+#define DATA_PES_RECORD		 0x10
+#define DATA_PES_PLAY		 0x11
+#define DATA_TS_RECORD		 0x12
+#define DATA_TS_PLAY		 0x13
+
+/* ancient CI command codes, only two are actually still used
+ * by the link level CI firmware */
+#define CI_CMD_ERROR		 0x00
+#define CI_CMD_ACK		 0x01
+#define CI_CMD_SYSTEM_READY	 0x02
+#define CI_CMD_KEYPRESS		 0x03
+#define CI_CMD_ON_TUNED		 0x04
+#define CI_CMD_ON_SWITCH_PROGRAM 0x05
+#define CI_CMD_SECTION_ARRIVED	 0x06
+#define CI_CMD_SECTION_TIMEOUT	 0x07
+#define CI_CMD_TIME		 0x08
+#define CI_CMD_ENTER_MENU	 0x09
+#define CI_CMD_FAST_PSI		 0x0a
+#define CI_CMD_GET_SLOT_INFO	 0x0b
+
+#define CI_MSG_NONE		 0x00
+#define CI_MSG_CI_INFO		 0x01
+#define CI_MSG_MENU		 0x02
+#define CI_MSG_LIST		 0x03
+#define CI_MSG_TEXT		 0x04
+#define CI_MSG_REQUEST_INPUT	 0x05
+#define CI_MSG_INPUT_COMPLETE	 0x06
+#define CI_MSG_LIST_MORE	 0x07
+#define CI_MSG_MENU_MORE	 0x08
+#define CI_MSG_CLOSE_MMI_IMM	 0x09
+#define CI_MSG_SECTION_REQUEST	 0x0a
+#define CI_MSG_CLOSE_FILTER	 0x0b
+#define CI_PSI_COMPLETE		 0x0c
+#define CI_MODULE_READY		 0x0d
+#define CI_SWITCH_PRG_REPLY	 0x0e
+#define CI_MSG_TEXT_MORE	 0x0f
+
+#define CI_MSG_CA_PMT		 0xe0
+#define CI_MSG_ERROR		 0xf0
+
+
+/* base address of the dual ported RAM which serves as communication
+ * area between PCI bus and av7110,
+ * as seen by the DEBI bus of the saa7146 */
+#define	DPRAM_BASE 0x4000
+
+/* boot protocol area */
+#define AV7110_BOOT_STATE	(DPRAM_BASE + 0x3F8)
+#define AV7110_BOOT_SIZE	(DPRAM_BASE + 0x3FA)
+#define AV7110_BOOT_BASE	(DPRAM_BASE + 0x3FC)
+#define AV7110_BOOT_BLOCK	(DPRAM_BASE + 0x400)
+#define AV7110_BOOT_MAX_SIZE	0xc00
+
+/* firmware command protocol area */
+#define IRQ_STATE	(DPRAM_BASE + 0x0F4)
+#define IRQ_STATE_EXT	(DPRAM_BASE + 0x0F6)
+#define MSGSTATE	(DPRAM_BASE + 0x0F8)
+#define COMMAND		(DPRAM_BASE + 0x0FC)
+#define COM_BUFF	(DPRAM_BASE + 0x100)
+#define COM_BUFF_SIZE	0x20
+
+/* various data buffers */
+#define BUFF1_BASE	(DPRAM_BASE + 0x120)
+#define BUFF1_SIZE	0xE0
+
+#define DATA_BUFF0_BASE	(DPRAM_BASE + 0x200)
+#define DATA_BUFF0_SIZE	0x0800
+
+#define DATA_BUFF1_BASE	(DATA_BUFF0_BASE+DATA_BUFF0_SIZE)
+#define DATA_BUFF1_SIZE	0x0800
+
+#define DATA_BUFF2_BASE	(DATA_BUFF1_BASE+DATA_BUFF1_SIZE)
+#define DATA_BUFF2_SIZE	0x0800
+
+#define DATA_BUFF3_BASE (DATA_BUFF2_BASE+DATA_BUFF2_SIZE)
+#define DATA_BUFF3_SIZE 0x0400
+
+#define Reserved	(DPRAM_BASE + 0x1E00)
+#define Reserved_SIZE	0x1C0
+
+
+/* firmware status area */
+#define STATUS_BASE	(DPRAM_BASE + 0x1FC0)
+#define STATUS_LOOPS	(STATUS_BASE + 0x08)
+
+#define STATUS_MPEG_WIDTH     (STATUS_BASE + 0x0C)
+/* ((aspect_ratio & 0xf) << 12) | (height & 0xfff) */
+#define STATUS_MPEG_HEIGHT_AR (STATUS_BASE + 0x0E)
+
+/* firmware data protocol area */
+#define RX_TYPE		(DPRAM_BASE + 0x1FE8)
+#define RX_LEN		(DPRAM_BASE + 0x1FEA)
+#define TX_TYPE		(DPRAM_BASE + 0x1FEC)
+#define TX_LEN		(DPRAM_BASE + 0x1FEE)
+
+#define RX_BUFF		(DPRAM_BASE + 0x1FF4)
+#define TX_BUFF		(DPRAM_BASE + 0x1FF6)
+
+#define HANDSHAKE_REG	(DPRAM_BASE + 0x1FF8)
+#define COM_IF_LOCK	(DPRAM_BASE + 0x1FFA)
+
+#define IRQ_RX		(DPRAM_BASE + 0x1FFC)
+#define IRQ_TX		(DPRAM_BASE + 0x1FFE)
+
+/* used by boot protocol to load firmware into av7110 DRAM */
+#define DRAM_START_CODE		0x2e000404
+#define DRAM_MAX_CODE_SIZE	0x00100000
+
+/* saa7146 gpio lines */
+#define RESET_LINE		2
+#define DEBI_DONE_LINE		1
+#define ARM_IRQ_LINE		0
+
+
+
+extern int av7110_bootarm(struct av7110 *av7110);
+extern int av7110_firmversion(struct av7110 *av7110);
+#define FW_CI_LL_SUPPORT(arm_app) ((arm_app) & 0x80000000)
+#define FW_4M_SDRAM(arm_app)      ((arm_app) & 0x40000000)
+#define FW_VERSION(arm_app)	  ((arm_app) & 0x0000FFFF)
+
+extern int av7110_wait_msgstate(struct av7110 *av7110, u16 flags);
+extern int av7110_fw_cmd(struct av7110 *av7110, int type, int com, int num, ...);
+extern int av7110_fw_request(struct av7110 *av7110, u16 *request_buf,
+			     int request_buf_len, u16 *reply_buf, int reply_buf_len);
+
+
+/* DEBI (saa7146 data extension bus interface) access */
+extern int av7110_debiwrite(struct av7110 *av7110, u32 config,
+			    int addr, u32 val, unsigned int count);
+extern u32 av7110_debiread(struct av7110 *av7110, u32 config,
+			   int addr, unsigned int count);
+
+
+/* DEBI during interrupt */
+/* single word writes */
+static inline void iwdebi(struct av7110 *av7110, u32 config, int addr, u32 val, unsigned int count)
+{
+	av7110_debiwrite(av7110, config, addr, val, count);
+}
+
+/* buffer writes */
+static inline void mwdebi(struct av7110 *av7110, u32 config, int addr,
+			  const u8 *val, int count)
+{
+	memcpy(av7110->debi_virt, val, count);
+	av7110_debiwrite(av7110, config, addr, 0, count);
+}
+
+static inline u32 irdebi(struct av7110 *av7110, u32 config, int addr, u32 val, unsigned int count)
+{
+	u32 res;
+
+	res=av7110_debiread(av7110, config, addr, count);
+	if (count<=4)
+		memcpy(av7110->debi_virt, (char *) &res, count);
+	return res;
+}
+
+/* DEBI outside interrupts, only for count <= 4! */
+static inline void wdebi(struct av7110 *av7110, u32 config, int addr, u32 val, unsigned int count)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&av7110->debilock, flags);
+	av7110_debiwrite(av7110, config, addr, val, count);
+	spin_unlock_irqrestore(&av7110->debilock, flags);
+}
+
+static inline u32 rdebi(struct av7110 *av7110, u32 config, int addr, u32 val, unsigned int count)
+{
+	unsigned long flags;
+	u32 res;
+
+	spin_lock_irqsave(&av7110->debilock, flags);
+	res=av7110_debiread(av7110, config, addr, count);
+	spin_unlock_irqrestore(&av7110->debilock, flags);
+	return res;
+}
+
+/* handle mailbox registers of the dual ported RAM */
+static inline void ARM_ResetMailBox(struct av7110 *av7110)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&av7110->debilock, flags);
+	av7110_debiread(av7110, DEBINOSWAP, IRQ_RX, 2);
+	av7110_debiwrite(av7110, DEBINOSWAP, IRQ_RX, 0, 2);
+	spin_unlock_irqrestore(&av7110->debilock, flags);
+}
+
+static inline void ARM_ClearMailBox(struct av7110 *av7110)
+{
+	iwdebi(av7110, DEBINOSWAP, IRQ_RX, 0, 2);
+}
+
+static inline void ARM_ClearIrq(struct av7110 *av7110)
+{
+	irdebi(av7110, DEBINOSWAP, IRQ_RX, 0, 2);
+}
+
+/****************************************************************************
+ * Firmware commands
+ ****************************************************************************/
+
+static inline int SendDAC(struct av7110 *av7110, u8 addr, u8 data)
+{
+	return av7110_fw_cmd(av7110, COMTYPE_AUDIODAC, AudioDAC, 2, addr, data);
+}
+
+static inline int av7710_set_video_mode(struct av7110 *av7110, int mode)
+{
+	return av7110_fw_cmd(av7110, COMTYPE_ENCODER, SetVidMode, 1, mode);
+}
+
+static inline int vidcom(struct av7110 *av7110, u32 com, u32 arg)
+{
+	return av7110_fw_cmd(av7110, COMTYPE_MISC, AV7110_FW_VIDEO_COMMAND, 4,
+			     (com>>16), (com&0xffff),
+			     (arg>>16), (arg&0xffff));
+}
+
+static inline int audcom(struct av7110 *av7110, u32 com)
+{
+	return av7110_fw_cmd(av7110, COMTYPE_MISC, AV7110_FW_AUDIO_COMMAND, 2,
+			     (com>>16), (com&0xffff));
+}
+
+static inline int Set22K(struct av7110 *av7110, int state)
+{
+	return av7110_fw_cmd(av7110, COMTYPE_AUDIODAC, (state ? ON22K : OFF22K), 0);
+}
+
+
+extern int av7110_diseqc_send(struct av7110 *av7110, int len, u8 *msg, unsigned long burst);
+
+
+#ifdef CONFIG_DVB_AV7110_OSD
+extern int av7110_osd_cmd(struct av7110 *av7110, osd_cmd_t *dc);
+extern int av7110_osd_capability(struct av7110 *av7110, osd_cap_t *cap);
+#endif /* CONFIG_DVB_AV7110_OSD */
+
+
+
+#endif /* _AV7110_HW_H_ */