Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 3176 insertions, 0 deletions

diff --git a/drivers/mtd/nand/raw/marvell_nand.c b/drivers/mtd/nand/raw/marvell_nand.c
new file mode 100644
index 000000000..9ed3ff7f4
--- /dev/null
+++ b/drivers/mtd/nand/raw/marvell_nand.c
@@ -0,0 +1,3176 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Marvell NAND flash controller driver
+ *
+ * Copyright (C) 2017 Marvell
+ * Author: Miquel RAYNAL <miquel.raynal@free-electrons.com>
+ *
+ *
+ * This NAND controller driver handles two versions of the hardware,
+ * one is called NFCv1 and is available on PXA SoCs and the other is
+ * called NFCv2 and is available on Armada SoCs.
+ *
+ * The main visible difference is that NFCv1 only has Hamming ECC
+ * capabilities, while NFCv2 also embeds a BCH ECC engine. Also, DMA
+ * is not used with NFCv2.
+ *
+ * The ECC layouts are depicted in details in Marvell AN-379, but here
+ * is a brief description.
+ *
+ * When using Hamming, the data is split in 512B chunks (either 1, 2
+ * or 4) and each chunk will have its own ECC "digest" of 6B at the
+ * beginning of the OOB area and eventually the remaining free OOB
+ * bytes (also called "spare" bytes in the driver). This engine
+ * corrects up to 1 bit per chunk and detects reliably an error if
+ * there are at most 2 bitflips. Here is the page layout used by the
+ * controller when Hamming is chosen:
+ *
+ * +-------------------------------------------------------------+
+ * | Data 1 | ... | Data N | ECC 1 | ... | ECCN | Free OOB bytes |
+ * +-------------------------------------------------------------+
+ *
+ * When using the BCH engine, there are N identical (data + free OOB +
+ * ECC) sections and potentially an extra one to deal with
+ * configurations where the chosen (data + free OOB + ECC) sizes do
+ * not align with the page (data + OOB) size. ECC bytes are always
+ * 30B per ECC chunk. Here is the page layout used by the controller
+ * when BCH is chosen:
+ *
+ * +-----------------------------------------
+ * | Data 1 | Free OOB bytes 1 | ECC 1 | ...
+ * +-----------------------------------------
+ *
+ *      -------------------------------------------
+ *       ... | Data N | Free OOB bytes N | ECC N |
+ *      -------------------------------------------
+ *
+ *           --------------------------------------------+
+ *            Last Data | Last Free OOB bytes | Last ECC |
+ *           --------------------------------------------+
+ *
+ * In both cases, the layout seen by the user is always: all data
+ * first, then all free OOB bytes and finally all ECC bytes. With BCH,
+ * ECC bytes are 30B long and are padded with 0xFF to align on 32
+ * bytes.
+ *
+ * The controller has certain limitations that are handled by the
+ * driver:
+ *   - It can only read 2k at a time. To overcome this limitation, the
+ *     driver issues data cycles on the bus, without issuing new
+ *     CMD + ADDR cycles. The Marvell term is "naked" operations.
+ *   - The ECC strength in BCH mode cannot be tuned. It is fixed 16
+ *     bits. What can be tuned is the ECC block size as long as it
+ *     stays between 512B and 2kiB. It's usually chosen based on the
+ *     chip ECC requirements. For instance, using 2kiB ECC chunks
+ *     provides 4b/512B correctability.
+ *   - The controller will always treat data bytes, free OOB bytes
+ *     and ECC bytes in that order, no matter what the real layout is
+ *     (which is usually all data then all OOB bytes). The
+ *     marvell_nfc_layouts array below contains the currently
+ *     supported layouts.
+ *   - Because of these weird layouts, the Bad Block Markers can be
+ *     located in data section. In this case, the NAND_BBT_NO_OOB_BBM
+ *     option must be set to prevent scanning/writing bad block
+ *     markers.
+ */
+
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/mtd/rawnand.h>
+#include <linux/of_platform.h>
+#include <linux/iopoll.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+#include <asm/unaligned.h>
+
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include <linux/dma/pxa-dma.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
+
+/* Data FIFO granularity, FIFO reads/writes must be a multiple of this length */
+#define FIFO_DEPTH		8
+#define FIFO_REP(x)		(x / sizeof(u32))
+#define BCH_SEQ_READS		(32 / FIFO_DEPTH)
+/* NFC does not support transfers of larger chunks at a time */
+#define MAX_CHUNK_SIZE		2112
+/* NFCv1 cannot read more that 7 bytes of ID */
+#define NFCV1_READID_LEN	7
+/* Polling is done at a pace of POLL_PERIOD us until POLL_TIMEOUT is reached */
+#define POLL_PERIOD		0
+#define POLL_TIMEOUT		100000
+/* Interrupt maximum wait period in ms */
+#define IRQ_TIMEOUT		1000
+/* Latency in clock cycles between SoC pins and NFC logic */
+#define MIN_RD_DEL_CNT		3
+/* Maximum number of contiguous address cycles */
+#define MAX_ADDRESS_CYC_NFCV1	5
+#define MAX_ADDRESS_CYC_NFCV2	7
+/* System control registers/bits to enable the NAND controller on some SoCs */
+#define GENCONF_SOC_DEVICE_MUX	0x208
+#define GENCONF_SOC_DEVICE_MUX_NFC_EN BIT(0)
+#define GENCONF_SOC_DEVICE_MUX_ECC_CLK_RST BIT(20)
+#define GENCONF_SOC_DEVICE_MUX_ECC_CORE_RST BIT(21)
+#define GENCONF_SOC_DEVICE_MUX_NFC_INT_EN BIT(25)
+#define GENCONF_CLK_GATING_CTRL	0x220
+#define GENCONF_CLK_GATING_CTRL_ND_GATE BIT(2)
+#define GENCONF_ND_CLK_CTRL	0x700
+#define GENCONF_ND_CLK_CTRL_EN	BIT(0)
+
+/* NAND controller data flash control register */
+#define NDCR			0x00
+#define NDCR_ALL_INT		GENMASK(11, 0)
+#define NDCR_CS1_CMDDM		BIT(7)
+#define NDCR_CS0_CMDDM		BIT(8)
+#define NDCR_RDYM		BIT(11)
+#define NDCR_ND_ARB_EN		BIT(12)
+#define NDCR_RA_START		BIT(15)
+#define NDCR_RD_ID_CNT(x)	(min_t(unsigned int, x, 0x7) << 16)
+#define NDCR_PAGE_SZ(x)		(x >= 2048 ? BIT(24) : 0)
+#define NDCR_DWIDTH_M		BIT(26)
+#define NDCR_DWIDTH_C		BIT(27)
+#define NDCR_ND_RUN		BIT(28)
+#define NDCR_DMA_EN		BIT(29)
+#define NDCR_ECC_EN		BIT(30)
+#define NDCR_SPARE_EN		BIT(31)
+#define NDCR_GENERIC_FIELDS_MASK (~(NDCR_RA_START | NDCR_PAGE_SZ(2048) | \
+				    NDCR_DWIDTH_M | NDCR_DWIDTH_C))
+
+/* NAND interface timing parameter 0 register */
+#define NDTR0			0x04
+#define NDTR0_TRP(x)		((min_t(unsigned int, x, 0xF) & 0x7) << 0)
+#define NDTR0_TRH(x)		(min_t(unsigned int, x, 0x7) << 3)
+#define NDTR0_ETRP(x)		((min_t(unsigned int, x, 0xF) & 0x8) << 3)
+#define NDTR0_SEL_NRE_EDGE	BIT(7)
+#define NDTR0_TWP(x)		(min_t(unsigned int, x, 0x7) << 8)
+#define NDTR0_TWH(x)		(min_t(unsigned int, x, 0x7) << 11)
+#define NDTR0_TCS(x)		(min_t(unsigned int, x, 0x7) << 16)
+#define NDTR0_TCH(x)		(min_t(unsigned int, x, 0x7) << 19)
+#define NDTR0_RD_CNT_DEL(x)	(min_t(unsigned int, x, 0xF) << 22)
+#define NDTR0_SELCNTR		BIT(26)
+#define NDTR0_TADL(x)		(min_t(unsigned int, x, 0x1F) << 27)
+
+/* NAND interface timing parameter 1 register */
+#define NDTR1			0x0C
+#define NDTR1_TAR(x)		(min_t(unsigned int, x, 0xF) << 0)
+#define NDTR1_TWHR(x)		(min_t(unsigned int, x, 0xF) << 4)
+#define NDTR1_TRHW(x)		(min_t(unsigned int, x / 16, 0x3) << 8)
+#define NDTR1_PRESCALE		BIT(14)
+#define NDTR1_WAIT_MODE		BIT(15)
+#define NDTR1_TR(x)		(min_t(unsigned int, x, 0xFFFF) << 16)
+
+/* NAND controller status register */
+#define NDSR			0x14
+#define NDSR_WRCMDREQ		BIT(0)
+#define NDSR_RDDREQ		BIT(1)
+#define NDSR_WRDREQ		BIT(2)
+#define NDSR_CORERR		BIT(3)
+#define NDSR_UNCERR		BIT(4)
+#define NDSR_CMDD(cs)		BIT(8 - cs)
+#define NDSR_RDY(rb)		BIT(11 + rb)
+#define NDSR_ERRCNT(x)		((x >> 16) & 0x1F)
+
+/* NAND ECC control register */
+#define NDECCCTRL		0x28
+#define NDECCCTRL_BCH_EN	BIT(0)
+
+/* NAND controller data buffer register */
+#define NDDB			0x40
+
+/* NAND controller command buffer 0 register */
+#define NDCB0			0x48
+#define NDCB0_CMD1(x)		((x & 0xFF) << 0)
+#define NDCB0_CMD2(x)		((x & 0xFF) << 8)
+#define NDCB0_ADDR_CYC(x)	((x & 0x7) << 16)
+#define NDCB0_ADDR_GET_NUM_CYC(x) (((x) >> 16) & 0x7)
+#define NDCB0_DBC		BIT(19)
+#define NDCB0_CMD_TYPE(x)	((x & 0x7) << 21)
+#define NDCB0_CSEL		BIT(24)
+#define NDCB0_RDY_BYP		BIT(27)
+#define NDCB0_LEN_OVRD		BIT(28)
+#define NDCB0_CMD_XTYPE(x)	((x & 0x7) << 29)
+
+/* NAND controller command buffer 1 register */
+#define NDCB1			0x4C
+#define NDCB1_COLS(x)		((x & 0xFFFF) << 0)
+#define NDCB1_ADDRS_PAGE(x)	(x << 16)
+
+/* NAND controller command buffer 2 register */
+#define NDCB2			0x50
+#define NDCB2_ADDR5_PAGE(x)	(((x >> 16) & 0xFF) << 0)
+#define NDCB2_ADDR5_CYC(x)	((x & 0xFF) << 0)
+
+/* NAND controller command buffer 3 register */
+#define NDCB3			0x54
+#define NDCB3_ADDR6_CYC(x)	((x & 0xFF) << 16)
+#define NDCB3_ADDR7_CYC(x)	((x & 0xFF) << 24)
+
+/* NAND controller command buffer 0 register 'type' and 'xtype' fields */
+#define TYPE_READ		0
+#define TYPE_WRITE		1
+#define TYPE_ERASE		2
+#define TYPE_READ_ID		3
+#define TYPE_STATUS		4
+#define TYPE_RESET		5
+#define TYPE_NAKED_CMD		6
+#define TYPE_NAKED_ADDR		7
+#define TYPE_MASK		7
+#define XTYPE_MONOLITHIC_RW	0
+#define XTYPE_LAST_NAKED_RW	1
+#define XTYPE_FINAL_COMMAND	3
+#define XTYPE_READ		4
+#define XTYPE_WRITE_DISPATCH	4
+#define XTYPE_NAKED_RW		5
+#define XTYPE_COMMAND_DISPATCH	6
+#define XTYPE_MASK		7
+
+/**
+ * struct marvell_hw_ecc_layout - layout of Marvell ECC
+ *
+ * Marvell ECC engine works differently than the others, in order to limit the
+ * size of the IP, hardware engineers chose to set a fixed strength at 16 bits
+ * per subpage, and depending on a the desired strength needed by the NAND chip,
+ * a particular layout mixing data/spare/ecc is defined, with a possible last
+ * chunk smaller that the others.
+ *
+ * @writesize:		Full page size on which the layout applies
+ * @chunk:		Desired ECC chunk size on which the layout applies
+ * @strength:		Desired ECC strength (per chunk size bytes) on which the
+ *			layout applies
+ * @nchunks:		Total number of chunks
+ * @full_chunk_cnt:	Number of full-sized chunks, which is the number of
+ *			repetitions of the pattern:
+ *			(data_bytes + spare_bytes + ecc_bytes).
+ * @data_bytes:		Number of data bytes per chunk
+ * @spare_bytes:	Number of spare bytes per chunk
+ * @ecc_bytes:		Number of ecc bytes per chunk
+ * @last_data_bytes:	Number of data bytes in the last chunk
+ * @last_spare_bytes:	Number of spare bytes in the last chunk
+ * @last_ecc_bytes:	Number of ecc bytes in the last chunk
+ */
+struct marvell_hw_ecc_layout {
+	/* Constraints */
+	int writesize;
+	int chunk;
+	int strength;
+	/* Corresponding layout */
+	int nchunks;
+	int full_chunk_cnt;
+	int data_bytes;
+	int spare_bytes;
+	int ecc_bytes;
+	int last_data_bytes;
+	int last_spare_bytes;
+	int last_ecc_bytes;
+};
+
+#define MARVELL_LAYOUT(ws, dc, ds, nc, fcc, db, sb, eb, ldb, lsb, leb)	\
+	{								\
+		.writesize = ws,					\
+		.chunk = dc,						\
+		.strength = ds,						\
+		.nchunks = nc,						\
+		.full_chunk_cnt = fcc,					\
+		.data_bytes = db,					\
+		.spare_bytes = sb,					\
+		.ecc_bytes = eb,					\
+		.last_data_bytes = ldb,					\
+		.last_spare_bytes = lsb,				\
+		.last_ecc_bytes = leb,					\
+	}
+
+/* Layouts explained in AN-379_Marvell_SoC_NFC_ECC */
+static const struct marvell_hw_ecc_layout marvell_nfc_layouts[] = {
+	MARVELL_LAYOUT(  512,   512,  1,  1,  1,  512,  8,  8,  0,  0,  0),
+	MARVELL_LAYOUT( 2048,   512,  1,  1,  1, 2048, 40, 24,  0,  0,  0),
+	MARVELL_LAYOUT( 2048,   512,  4,  1,  1, 2048, 32, 30,  0,  0,  0),
+	MARVELL_LAYOUT( 2048,   512,  8,  2,  1, 1024,  0, 30,1024,32, 30),
+	MARVELL_LAYOUT( 4096,   512,  4,  2,  2, 2048, 32, 30,  0,  0,  0),
+	MARVELL_LAYOUT( 4096,   512,  8,  5,  4, 1024,  0, 30,  0, 64, 30),
+	MARVELL_LAYOUT( 8192,   512,  4,  4,  4, 2048,  0, 30,  0,  0,  0),
+	MARVELL_LAYOUT( 8192,   512,  8,  9,  8, 1024,  0, 30,  0, 160, 30),
+};
+
+/**
+ * struct marvell_nand_chip_sel - CS line description
+ *
+ * The Nand Flash Controller has up to 4 CE and 2 RB pins. The CE selection
+ * is made by a field in NDCB0 register, and in another field in NDCB2 register.
+ * The datasheet describes the logic with an error: ADDR5 field is once
+ * declared at the beginning of NDCB2, and another time at its end. Because the
+ * ADDR5 field of NDCB2 may be used by other bytes, it would be more logical
+ * to use the last bit of this field instead of the first ones.
+ *
+ * @cs:			Wanted CE lane.
+ * @ndcb0_csel:		Value of the NDCB0 register with or without the flag
+ *			selecting the wanted CE lane. This is set once when
+ *			the Device Tree is probed.
+ * @rb:			Ready/Busy pin for the flash chip
+ */
+struct marvell_nand_chip_sel {
+	unsigned int cs;
+	u32 ndcb0_csel;
+	unsigned int rb;
+};
+
+/**
+ * struct marvell_nand_chip - stores NAND chip device related information
+ *
+ * @chip:		Base NAND chip structure
+ * @node:		Used to store NAND chips into a list
+ * @layout:		NAND layout when using hardware ECC
+ * @ndcr:		Controller register value for this NAND chip
+ * @ndtr0:		Timing registers 0 value for this NAND chip
+ * @ndtr1:		Timing registers 1 value for this NAND chip
+ * @addr_cyc:		Amount of cycles needed to pass column address
+ * @selected_die:	Current active CS
+ * @nsels:		Number of CS lines required by the NAND chip
+ * @sels:		Array of CS lines descriptions
+ */
+struct marvell_nand_chip {
+	struct nand_chip chip;
+	struct list_head node;
+	const struct marvell_hw_ecc_layout *layout;
+	u32 ndcr;
+	u32 ndtr0;
+	u32 ndtr1;
+	int addr_cyc;
+	int selected_die;
+	unsigned int nsels;
+	struct marvell_nand_chip_sel sels[];
+};
+
+static inline struct marvell_nand_chip *to_marvell_nand(struct nand_chip *chip)
+{
+	return container_of(chip, struct marvell_nand_chip, chip);
+}
+
+static inline struct marvell_nand_chip_sel *to_nand_sel(struct marvell_nand_chip
+							*nand)
+{
+	return &nand->sels[nand->selected_die];
+}
+
+/**
+ * struct marvell_nfc_caps - NAND controller capabilities for distinction
+ *                           between compatible strings
+ *
+ * @max_cs_nb:		Number of Chip Select lines available
+ * @max_rb_nb:		Number of Ready/Busy lines available
+ * @need_system_controller: Indicates if the SoC needs to have access to the
+ *                      system controller (ie. to enable the NAND controller)
+ * @legacy_of_bindings:	Indicates if DT parsing must be done using the old
+ *			fashion way
+ * @is_nfcv2:		NFCv2 has numerous enhancements compared to NFCv1, ie.
+ *			BCH error detection and correction algorithm,
+ *			NDCB3 register has been added
+ * @use_dma:		Use dma for data transfers
+ */
+struct marvell_nfc_caps {
+	unsigned int max_cs_nb;
+	unsigned int max_rb_nb;
+	bool need_system_controller;
+	bool legacy_of_bindings;
+	bool is_nfcv2;
+	bool use_dma;
+};
+
+/**
+ * struct marvell_nfc - stores Marvell NAND controller information
+ *
+ * @controller:		Base controller structure
+ * @dev:		Parent device (used to print error messages)
+ * @regs:		NAND controller registers
+ * @core_clk:		Core clock
+ * @reg_clk:		Registers clock
+ * @complete:		Completion object to wait for NAND controller events
+ * @assigned_cs:	Bitmask describing already assigned CS lines
+ * @chips:		List containing all the NAND chips attached to
+ *			this NAND controller
+ * @selected_chip:	Currently selected target chip
+ * @caps:		NAND controller capabilities for each compatible string
+ * @use_dma:		Whetner DMA is used
+ * @dma_chan:		DMA channel (NFCv1 only)
+ * @dma_buf:		32-bit aligned buffer for DMA transfers (NFCv1 only)
+ */
+struct marvell_nfc {
+	struct nand_controller controller;
+	struct device *dev;
+	void __iomem *regs;
+	struct clk *core_clk;
+	struct clk *reg_clk;
+	struct completion complete;
+	unsigned long assigned_cs;
+	struct list_head chips;
+	struct nand_chip *selected_chip;
+	const struct marvell_nfc_caps *caps;
+
+	/* DMA (NFCv1 only) */
+	bool use_dma;
+	struct dma_chan *dma_chan;
+	u8 *dma_buf;
+};
+
+static inline struct marvell_nfc *to_marvell_nfc(struct nand_controller *ctrl)
+{
+	return container_of(ctrl, struct marvell_nfc, controller);
+}
+
+/**
+ * struct marvell_nfc_timings - NAND controller timings expressed in NAND
+ *                              Controller clock cycles
+ *
+ * @tRP:		ND_nRE pulse width
+ * @tRH:		ND_nRE high duration
+ * @tWP:		ND_nWE pulse time
+ * @tWH:		ND_nWE high duration
+ * @tCS:		Enable signal setup time
+ * @tCH:		Enable signal hold time
+ * @tADL:		Address to write data delay
+ * @tAR:		ND_ALE low to ND_nRE low delay
+ * @tWHR:		ND_nWE high to ND_nRE low for status read
+ * @tRHW:		ND_nRE high duration, read to write delay
+ * @tR:			ND_nWE high to ND_nRE low for read
+ */
+struct marvell_nfc_timings {
+	/* NDTR0 fields */
+	unsigned int tRP;
+	unsigned int tRH;
+	unsigned int tWP;
+	unsigned int tWH;
+	unsigned int tCS;
+	unsigned int tCH;
+	unsigned int tADL;
+	/* NDTR1 fields */
+	unsigned int tAR;
+	unsigned int tWHR;
+	unsigned int tRHW;
+	unsigned int tR;
+};
+
+/**
+ * Derives a duration in numbers of clock cycles.
+ *
+ * @ps: Duration in pico-seconds
+ * @period_ns:  Clock period in nano-seconds
+ *
+ * Convert the duration in nano-seconds, then divide by the period and
+ * return the number of clock periods.
+ */
+#define TO_CYCLES(ps, period_ns) (DIV_ROUND_UP(ps / 1000, period_ns))
+#define TO_CYCLES64(ps, period_ns) (DIV_ROUND_UP_ULL(div_u64(ps, 1000), \
+						     period_ns))
+
+/**
+ * struct marvell_nfc_op - filled during the parsing of the ->exec_op()
+ *                         subop subset of instructions.
+ *
+ * @ndcb:		Array of values written to NDCBx registers
+ * @cle_ale_delay_ns:	Optional delay after the last CMD or ADDR cycle
+ * @rdy_timeout_ms:	Timeout for waits on Ready/Busy pin
+ * @rdy_delay_ns:	Optional delay after waiting for the RB pin
+ * @data_delay_ns:	Optional delay after the data xfer
+ * @data_instr_idx:	Index of the data instruction in the subop
+ * @data_instr:		Pointer to the data instruction in the subop
+ */
+struct marvell_nfc_op {
+	u32 ndcb[4];
+	unsigned int cle_ale_delay_ns;
+	unsigned int rdy_timeout_ms;
+	unsigned int rdy_delay_ns;
+	unsigned int data_delay_ns;
+	unsigned int data_instr_idx;
+	const struct nand_op_instr *data_instr;
+};
+
+/*
+ * Internal helper to conditionnally apply a delay (from the above structure,
+ * most of the time).
+ */
+static void cond_delay(unsigned int ns)
+{
+	if (!ns)
+		return;
+
+	if (ns < 10000)
+		ndelay(ns);
+	else
+		udelay(DIV_ROUND_UP(ns, 1000));
+}
+
+/*
+ * The controller has many flags that could generate interrupts, most of them
+ * are disabled and polling is used. For the very slow signals, using interrupts
+ * may relax the CPU charge.
+ */
+static void marvell_nfc_disable_int(struct marvell_nfc *nfc, u32 int_mask)
+{
+	u32 reg;
+
+	/* Writing 1 disables the interrupt */
+	reg = readl_relaxed(nfc->regs + NDCR);
+	writel_relaxed(reg | int_mask, nfc->regs + NDCR);
+}
+
+static void marvell_nfc_enable_int(struct marvell_nfc *nfc, u32 int_mask)
+{
+	u32 reg;
+
+	/* Writing 0 enables the interrupt */
+	reg = readl_relaxed(nfc->regs + NDCR);
+	writel_relaxed(reg & ~int_mask, nfc->regs + NDCR);
+}
+
+static u32 marvell_nfc_clear_int(struct marvell_nfc *nfc, u32 int_mask)
+{
+	u32 reg;
+
+	reg = readl_relaxed(nfc->regs + NDSR);
+	writel_relaxed(int_mask, nfc->regs + NDSR);
+
+	return reg & int_mask;
+}
+
+static void marvell_nfc_force_byte_access(struct nand_chip *chip,
+					  bool force_8bit)
+{
+	struct marvell_nfc *nfc = to_marvell_nfc(chip->controller);
+	u32 ndcr;
+
+	/*
+	 * Callers of this function do not verify if the NAND is using a 16-bit
+	 * an 8-bit bus for normal operations, so we need to take care of that
+	 * here by leaving the configuration unchanged if the NAND does not have
+	 * the NAND_BUSWIDTH_16 flag set.
+	 */
+	if (!(chip->options & NAND_BUSWIDTH_16))
+		return;
+
+	ndcr = readl_relaxed(nfc->regs + NDCR);
+
+	if (force_8bit)
+		ndcr &= ~(NDCR_DWIDTH_M | NDCR_DWIDTH_C);
+	else
+		ndcr |= NDCR_DWIDTH_M | NDCR_DWIDTH_C;
+
+	writel_relaxed(ndcr, nfc->regs + NDCR);
+}
+
+static int marvell_nfc_wait_ndrun(struct nand_chip *chip)
+{
+	struct marvell_nfc *nfc = to_marvell_nfc(chip->controller);
+	u32 val;
+	int ret;
+
+	/*
+	 * The command is being processed, wait for the ND_RUN bit to be
+	 * cleared by the NFC. If not, we must clear it by hand.
+	 */
+	ret = readl_relaxed_poll_timeout(nfc->regs + NDCR, val,
+					 (val & NDCR_ND_RUN) == 0,
+					 POLL_PERIOD, POLL_TIMEOUT);
+	if (ret) {
+		dev_err(nfc->dev, "Timeout on NAND controller run mode\n");
+		writel_relaxed(readl(nfc->regs + NDCR) & ~NDCR_ND_RUN,
+			       nfc->regs + NDCR);
+		return ret;
+	}
+
+	return 0;
+}
+
+/*
+ * Any time a command has to be sent to the controller, the following sequence
+ * has to be followed:
+ * - call marvell_nfc_prepare_cmd()
+ *      -> activate the ND_RUN bit that will kind of 'start a job'
+ *      -> wait the signal indicating the NFC is waiting for a command
+ * - send the command (cmd and address cycles)
+ * - enventually send or receive the data
+ * - call marvell_nfc_end_cmd() with the corresponding flag
+ *      -> wait the flag to be triggered or cancel the job with a timeout
+ *
+ * The following helpers are here to factorize the code a bit so that
+ * specialized functions responsible for executing the actual NAND
+ * operations do not have to replicate the same code blocks.
+ */
+static int marvell_nfc_prepare_cmd(struct nand_chip *chip)
+{
+	struct marvell_nfc *nfc = to_marvell_nfc(chip->controller);
+	u32 ndcr, val;
+	int ret;
+
+	/* Poll ND_RUN and clear NDSR before issuing any command */
+	ret = marvell_nfc_wait_ndrun(chip);
+	if (ret) {
+		dev_err(nfc->dev, "Last operation did not succeed\n");
+		return ret;
+	}
+
+	ndcr = readl_relaxed(nfc->regs + NDCR);
+	writel_relaxed(readl(nfc->regs + NDSR), nfc->regs + NDSR);
+
+	/* Assert ND_RUN bit and wait the NFC to be ready */
+	writel_relaxed(ndcr | NDCR_ND_RUN, nfc->regs + NDCR);
+	ret = readl_relaxed_poll_timeout(nfc->regs + NDSR, val,
+					 val & NDSR_WRCMDREQ,
+					 POLL_PERIOD, POLL_TIMEOUT);
+	if (ret) {
+		dev_err(nfc->dev, "Timeout on WRCMDRE\n");
+		return -ETIMEDOUT;
+	}
+
+	/* Command may be written, clear WRCMDREQ status bit */
+	writel_relaxed(NDSR_WRCMDREQ, nfc->regs + NDSR);
+
+	return 0;
+}
+
+static void marvell_nfc_send_cmd(struct nand_chip *chip,
+				 struct marvell_nfc_op *nfc_op)
+{
+	struct marvell_nand_chip *marvell_nand = to_marvell_nand(chip);
+	struct marvell_nfc *nfc = to_marvell_nfc(chip->controller);
+
+	dev_dbg(nfc->dev, "\nNDCR:  0x%08x\n"
+		"NDCB0: 0x%08x\nNDCB1: 0x%08x\nNDCB2: 0x%08x\nNDCB3: 0x%08x\n",
+		(u32)readl_relaxed(nfc->regs + NDCR), nfc_op->ndcb[0],
+		nfc_op->ndcb[1], nfc_op->ndcb[2], nfc_op->ndcb[3]);
+
+	writel_relaxed(to_nand_sel(marvell_nand)->ndcb0_csel | nfc_op->ndcb[0],
+		       nfc->regs + NDCB0);
+	writel_relaxed(nfc_op->ndcb[1], nfc->regs + NDCB0);
+	writel(nfc_op->ndcb[2], nfc->regs + NDCB0);
+
+	/*
+	 * Write NDCB0 four times only if LEN_OVRD is set or if ADDR6 or ADDR7
+	 * fields are used (only available on NFCv2).
+	 */
+	if (nfc_op->ndcb[0] & NDCB0_LEN_OVRD ||
+	    NDCB0_ADDR_GET_NUM_CYC(nfc_op->ndcb[0]) >= 6) {
+		if (!WARN_ON_ONCE(!nfc->caps->is_nfcv2))
+			writel(nfc_op->ndcb[3], nfc->regs + NDCB0);
+	}
+}
+
+static int marvell_nfc_end_cmd(struct nand_chip *chip, int flag,
+			       const char *label)
+{
+	struct marvell_nfc *nfc = to_marvell_nfc(chip->controller);
+	u32 val;
+	int ret;
+
+	ret = readl_relaxed_poll_timeout(nfc->regs + NDSR, val,
+					 val & flag,
+					 POLL_PERIOD, POLL_TIMEOUT);
+
+	if (ret) {
+		dev_err(nfc->dev, "Timeout on %s (NDSR: 0x%08x)\n",
+			label, val);
+		if (nfc->dma_chan)
+			dmaengine_terminate_all(nfc->dma_chan);
+		return ret;
+	}
+
+	/*
+	 * DMA function uses this helper to poll on CMDD bits without wanting
+	 * them to be cleared.
+	 */
+	if (nfc->use_dma && (readl_relaxed(nfc->regs + NDCR) & NDCR_DMA_EN))
+		return 0;
+
+	writel_relaxed(flag, nfc->regs + NDSR);
+
+	return 0;
+}
+
+static int marvell_nfc_wait_cmdd(struct nand_chip *chip)
+{
+	struct marvell_nand_chip *marvell_nand = to_marvell_nand(chip);
+	int cs_flag = NDSR_CMDD(to_nand_sel(marvell_nand)->ndcb0_csel);
+
+	return marvell_nfc_end_cmd(chip, cs_flag, "CMDD");
+}
+
+static int marvell_nfc_poll_status(struct marvell_nfc *nfc, u32 mask,
+				   u32 expected_val, unsigned long timeout_ms)
+{
+	unsigned long limit;
+	u32 st;
+
+	limit = jiffies + msecs_to_jiffies(timeout_ms);
+	do {
+		st = readl_relaxed(nfc->regs + NDSR);
+		if (st & NDSR_RDY(1))
+			st |= NDSR_RDY(0);
+
+		if ((st & mask) == expected_val)
+			return 0;
+
+		cpu_relax();
+	} while (time_after(limit, jiffies));
+
+	return -ETIMEDOUT;
+}
+
+static int marvell_nfc_wait_op(struct nand_chip *chip, unsigned int timeout_ms)
+{
+	struct marvell_nfc *nfc = to_marvell_nfc(chip->controller);
+	struct mtd_info *mtd = nand_to_mtd(chip);
+	u32 pending;
+	int ret;
+
+	/* Timeout is expressed in ms */
+	if (!timeout_ms)
+		timeout_ms = IRQ_TIMEOUT;
+
+	if (mtd->oops_panic_write) {
+		ret = marvell_nfc_poll_status(nfc, NDSR_RDY(0),
+					      NDSR_RDY(0),
+					      timeout_ms);
+	} else {
+		init_completion(&nfc->complete);
+
+		marvell_nfc_enable_int(nfc, NDCR_RDYM);
+		ret = wait_for_completion_timeout(&nfc->complete,
+						  msecs_to_jiffies(timeout_ms));
+		marvell_nfc_disable_int(nfc, NDCR_RDYM);
+	}
+	pending = marvell_nfc_clear_int(nfc, NDSR_RDY(0) | NDSR_RDY(1));
+
+	/*
+	 * In case the interrupt was not served in the required time frame,
+	 * check if the ISR was not served or if something went actually wrong.
+	 */
+	if (!ret && !pending) {
+		dev_err(nfc->dev, "Timeout waiting for RB signal\n");
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static void marvell_nfc_select_target(struct nand_chip *chip,
+				      unsigned int die_nr)
+{
+	struct marvell_nand_chip *marvell_nand = to_marvell_nand(chip);
+	struct marvell_nfc *nfc = to_marvell_nfc(chip->controller);
+	u32 ndcr_generic;
+
+	/*
+	 * Reset the NDCR register to a clean state for this particular chip,
+	 * also clear ND_RUN bit.
+	 */
+	ndcr_generic = readl_relaxed(nfc->regs + NDCR) &
+		       NDCR_GENERIC_FIELDS_MASK & ~NDCR_ND_RUN;
+	writel_relaxed(ndcr_generic | marvell_nand->ndcr, nfc->regs + NDCR);
+
+	/* Also reset the interrupt status register */
+	marvell_nfc_clear_int(nfc, NDCR_ALL_INT);
+
+	if (chip == nfc->selected_chip && die_nr == marvell_nand->selected_die)
+		return;
+
+	writel_relaxed(marvell_nand->ndtr0, nfc->regs + NDTR0);
+	writel_relaxed(marvell_nand->ndtr1, nfc->regs + NDTR1);
+
+	nfc->selected_chip = chip;
+	marvell_nand->selected_die = die_nr;
+}
+
+static irqreturn_t marvell_nfc_isr(int irq, void *dev_id)
+{
+	struct marvell_nfc *nfc = dev_id;
+	u32 st = readl_relaxed(nfc->regs + NDSR);
+	u32 ien = (~readl_relaxed(nfc->regs + NDCR)) & NDCR_ALL_INT;
+
+	/*
+	 * RDY interrupt mask is one bit in NDCR while there are two status
+	 * bit in NDSR (RDY[cs0/cs2] and RDY[cs1/cs3]).
+	 */
+	if (st & NDSR_RDY(1))
+		st |= NDSR_RDY(0);
+
+	if (!(st & ien))
+		return IRQ_NONE;
+
+	marvell_nfc_disable_int(nfc, st & NDCR_ALL_INT);
+
+	if (st & (NDSR_RDY(0) | NDSR_RDY(1)))
+		complete(&nfc->complete);
+
+	return IRQ_HANDLED;
+}
+
+/* HW ECC related functions */
+static void marvell_nfc_enable_hw_ecc(struct nand_chip *chip)
+{
+	struct marvell_nfc *nfc = to_marvell_nfc(chip->controller);
+	u32 ndcr = readl_relaxed(nfc->regs + NDCR);
+
+	if (!(ndcr & NDCR_ECC_EN)) {
+		writel_relaxed(ndcr | NDCR_ECC_EN, nfc->regs + NDCR);
+
+		/*
+		 * When enabling BCH, set threshold to 0 to always know the
+		 * number of corrected bitflips.
+		 */
+		if (chip->ecc.algo == NAND_ECC_ALGO_BCH)
+			writel_relaxed(NDECCCTRL_BCH_EN, nfc->regs + NDECCCTRL);
+	}
+}
+
+static void marvell_nfc_disable_hw_ecc(struct nand_chip *chip)
+{
+	struct marvell_nfc *nfc = to_marvell_nfc(chip->controller);
+	u32 ndcr = readl_relaxed(nfc->regs + NDCR);
+
+	if (ndcr & NDCR_ECC_EN) {
+		writel_relaxed(ndcr & ~NDCR_ECC_EN, nfc->regs + NDCR);
+		if (chip->ecc.algo == NAND_ECC_ALGO_BCH)
+			writel_relaxed(0, nfc->regs + NDECCCTRL);
+	}
+}
+
+/* DMA related helpers */
+static void marvell_nfc_enable_dma(struct marvell_nfc *nfc)
+{
+	u32 reg;
+
+	reg = readl_relaxed(nfc->regs + NDCR);
+	writel_relaxed(reg | NDCR_DMA_EN, nfc->regs + NDCR);
+}
+
+static void marvell_nfc_disable_dma(struct marvell_nfc *nfc)
+{
+	u32 reg;
+
+	reg = readl_relaxed(nfc->regs + NDCR);
+	writel_relaxed(reg & ~NDCR_DMA_EN, nfc->regs + NDCR);
+}
+
+/* Read/write PIO/DMA accessors */
+static int marvell_nfc_xfer_data_dma(struct marvell_nfc *nfc,
+				     enum dma_data_direction direction,
+				     unsigned int len)
+{
+	unsigned int dma_len = min_t(int, ALIGN(len, 32), MAX_CHUNK_SIZE);
+	struct dma_async_tx_descriptor *tx;
+	struct scatterlist sg;
+	dma_cookie_t cookie;
+	int ret;
+
+	marvell_nfc_enable_dma(nfc);
+	/* Prepare the DMA transfer */
+	sg_init_one(&sg, nfc->dma_buf, dma_len);
+	dma_map_sg(nfc->dma_chan->device->dev, &sg, 1, direction);
+	tx = dmaengine_prep_slave_sg(nfc->dma_chan, &sg, 1,
+				     direction == DMA_FROM_DEVICE ?
+				     DMA_DEV_TO_MEM : DMA_MEM_TO_DEV,
+				     DMA_PREP_INTERRUPT);
+	if (!tx) {
+		dev_err(nfc->dev, "Could not prepare DMA S/G list\n");
+		return -ENXIO;
+	}
+
+	/* Do the task and wait for it to finish */
+	cookie = dmaengine_submit(tx);
+	ret = dma_submit_error(cookie);
+	if (ret)
+		return -EIO;
+
+	dma_async_issue_pending(nfc->dma_chan);
+	ret = marvell_nfc_wait_cmdd(nfc->selected_chip);
+	dma_unmap_sg(nfc->dma_chan->device->dev, &sg, 1, direction);
+	marvell_nfc_disable_dma(nfc);
+	if (ret) {
+		dev_err(nfc->dev, "Timeout waiting for DMA (status: %d)\n",
+			dmaengine_tx_status(nfc->dma_chan, cookie, NULL));
+		dmaengine_terminate_all(nfc->dma_chan);
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static int marvell_nfc_xfer_data_in_pio(struct marvell_nfc *nfc, u8 *in,
+					unsigned int len)
+{
+	unsigned int last_len = len % FIFO_DEPTH;
+	unsigned int last_full_offset = round_down(len, FIFO_DEPTH);
+	int i;
+
+	for (i = 0; i < last_full_offset; i += FIFO_DEPTH)
+		ioread32_rep(nfc->regs + NDDB, in + i, FIFO_REP(FIFO_DEPTH));
+
+	if (last_len) {
+		u8 tmp_buf[FIFO_DEPTH];
+
+		ioread32_rep(nfc->regs + NDDB, tmp_buf, FIFO_REP(FIFO_DEPTH));
+		memcpy(in + last_full_offset, tmp_buf, last_len);
+	}
+
+	return 0;
+}
+
+static int marvell_nfc_xfer_data_out_pio(struct marvell_nfc *nfc, const u8 *out,
+					 unsigned int len)
+{
+	unsigned int last_len = len % FIFO_DEPTH;
+	unsigned int last_full_offset = round_down(len, FIFO_DEPTH);
+	int i;
+
+	for (i = 0; i < last_full_offset; i += FIFO_DEPTH)
+		iowrite32_rep(nfc->regs + NDDB, out + i, FIFO_REP(FIFO_DEPTH));
+
+	if (last_len) {
+		u8 tmp_buf[FIFO_DEPTH];
+
+		memcpy(tmp_buf, out + last_full_offset, last_len);
+		iowrite32_rep(nfc->regs + NDDB, tmp_buf, FIFO_REP(FIFO_DEPTH));
+	}
+
+	return 0;
+}
+
+static void marvell_nfc_check_empty_chunk(struct nand_chip *chip,
+					  u8 *data, int data_len,
+					  u8 *spare, int spare_len,
+					  u8 *ecc, int ecc_len,
+					  unsigned int *max_bitflips)
+{
+	struct mtd_info *mtd = nand_to_mtd(chip);
+	int bf;
+
+	/*
+	 * Blank pages (all 0xFF) that have not been written may be recognized
+	 * as bad if bitflips occur, so whenever an uncorrectable error occurs,
+	 * check if the entire page (with ECC bytes) is actually blank or not.
+	 */
+	if (!data)
+		data_len = 0;
+	if (!spare)
+		spare_len = 0;
+	if (!ecc)
+		ecc_len = 0;
+
+	bf = nand_check_erased_ecc_chunk(data, data_len, ecc, ecc_len,
+					 spare, spare_len, chip->ecc.strength);
+	if (bf < 0) {
+		mtd->ecc_stats.failed++;
+		return;
+	}
+
+	/* Update the stats and max_bitflips */
+	mtd->ecc_stats.corrected += bf;
+	*max_bitflips = max_t(unsigned int, *max_bitflips, bf);
+}
+
+/*
+ * Check if a chunk is correct or not according to the hardware ECC engine.
+ * mtd->ecc_stats.corrected is updated, as well as max_bitflips, however
+ * mtd->ecc_stats.failure is not, the function will instead return a non-zero
+ * value indicating that a check on the emptyness of the subpage must be
+ * performed before actually declaring the subpage as "corrupted".
+ */
+static int marvell_nfc_hw_ecc_check_bitflips(struct nand_chip *chip,
+					     unsigned int *max_bitflips)
+{
+	struct mtd_info *mtd = nand_to_mtd(chip);
+	struct marvell_nfc *nfc = to_marvell_nfc(chip->controller);
+	int bf = 0;
+	u32 ndsr;
+
+	ndsr = readl_relaxed(nfc->regs + NDSR);
+
+	/* Check uncorrectable error flag */
+	if (ndsr & NDSR_UNCERR) {
+		writel_relaxed(ndsr, nfc->regs + NDSR);
+
+		/*
+		 * Do not increment ->ecc_stats.failed now, instead, return a
+		 * non-zero value to indicate that this chunk was apparently
+		 * bad, and it should be check to see if it empty or not. If
+		 * the chunk (with ECC bytes) is not declared empty, the calling
+		 * function must increment the failure count.
+		 */
+		return -EBADMSG;
+	}
+
+	/* Check correctable error flag */
+	if (ndsr & NDSR_CORERR) {
+		writel_relaxed(ndsr, nfc->regs + NDSR);
+
+		if (chip->ecc.algo == NAND_ECC_ALGO_BCH)
+			bf = NDSR_ERRCNT(ndsr);
+		else
+			bf = 1;
+	}
+
+	/* Update the stats and max_bitflips */
+	mtd->ecc_stats.corrected += bf;
+	*max_bitflips = max_t(unsigned int, *max_bitflips, bf);
+
+	return 0;
+}
+
+/* Hamming read helpers */
+static int marvell_nfc_hw_ecc_hmg_do_read_page(struct nand_chip *chip,
+					       u8 *data_buf, u8 *oob_buf,
+					       bool raw, int page)
+{
+	struct marvell_nand_chip *marvell_nand = to_marvell_nand(chip);
+	struct marvell_nfc *nfc = to_marvell_nfc(chip->controller);
+	const struct marvell_hw_ecc_layout *lt = to_marvell_nand(chip)->layout;
+	struct marvell_nfc_op nfc_op = {
+		.ndcb[0] = NDCB0_CMD_TYPE(TYPE_READ) |
+			   NDCB0_ADDR_CYC(marvell_nand->addr_cyc) |
+			   NDCB0_DBC |
+			   NDCB0_CMD1(NAND_CMD_READ0) |
+			   NDCB0_CMD2(NAND_CMD_READSTART),
+		.ndcb[1] = NDCB1_ADDRS_PAGE(page),
+		.ndcb[2] = NDCB2_ADDR5_PAGE(page),
+	};
+	unsigned int oob_bytes = lt->spare_bytes + (raw ? lt->ecc_bytes : 0);
+	int ret;
+
+	/* NFCv2 needs more information about the operation being executed */
+	if (nfc->caps->is_nfcv2)
+		nfc_op.ndcb[0] |= NDCB0_CMD_XTYPE(XTYPE_MONOLITHIC_RW);
+
+	ret = marvell_nfc_prepare_cmd(chip);
+	if (ret)
+		return ret;
+
+	marvell_nfc_send_cmd(chip, &nfc_op);
+	ret = marvell_nfc_end_cmd(chip, NDSR_RDDREQ,
+				  "RDDREQ while draining FIFO (data/oob)");
+	if (ret)
+		return ret;
+
+	/*
+	 * Read the page then the OOB area. Unlike what is shown in current
+	 * documentation, spare bytes are protected by the ECC engine, and must
+	 * be at the beginning of the OOB area or running this driver on legacy
+	 * systems will prevent the discovery of the BBM/BBT.
+	 */
+	if (nfc->use_dma) {
+		marvell_nfc_xfer_data_dma(nfc, DMA_FROM_DEVICE,
+					  lt->data_bytes + oob_bytes);
+		memcpy(data_buf, nfc->dma_buf, lt->data_bytes);
+		memcpy(oob_buf, nfc->dma_buf + lt->data_bytes, oob_bytes);
+	} else {
+		marvell_nfc_xfer_data_in_pio(nfc, data_buf, lt->data_bytes);
+		marvell_nfc_xfer_data_in_pio(nfc, oob_buf, oob_bytes);
+	}
+
+	ret = marvell_nfc_wait_cmdd(chip);
+	return ret;
+}
+
+static int marvell_nfc_hw_ecc_hmg_read_page_raw(struct nand_chip *chip, u8 *buf,
+						int oob_required, int page)
+{
+	marvell_nfc_select_target(chip, chip->cur_cs);
+	return marvell_nfc_hw_ecc_hmg_do_read_page(chip, buf, chip->oob_poi,
+						   true, page);
+}
+
+static int marvell_nfc_hw_ecc_hmg_read_page(struct nand_chip *chip, u8 *buf,
+					    int oob_required, int page)
+{
+	const struct marvell_hw_ecc_layout *lt = to_marvell_nand(chip)->layout;
+	unsigned int full_sz = lt->data_bytes + lt->spare_bytes + lt->ecc_bytes;
+	int max_bitflips = 0, ret;
+	u8 *raw_buf;
+
+	marvell_nfc_select_target(chip, chip->cur_cs);
+	marvell_nfc_enable_hw_ecc(chip);
+	marvell_nfc_hw_ecc_hmg_do_read_page(chip, buf, chip->oob_poi, false,
+					    page);
+	ret = marvell_nfc_hw_ecc_check_bitflips(chip, &max_bitflips);
+	marvell_nfc_disable_hw_ecc(chip);
+
+	if (!ret)
+		return max_bitflips;
+
+	/*
+	 * When ECC failures are detected, check if the full page has been
+	 * written or not. Ignore the failure if it is actually empty.
+	 */
+	raw_buf = kmalloc(full_sz, GFP_KERNEL);
+	if (!raw_buf)
+		return -ENOMEM;
+
+	marvell_nfc_hw_ecc_hmg_do_read_page(chip, raw_buf, raw_buf +
+					    lt->data_bytes, true, page);
+	marvell_nfc_check_empty_chunk(chip, raw_buf, full_sz, NULL, 0, NULL, 0,
+				      &max_bitflips);
+	kfree(raw_buf);
+
+	return max_bitflips;
+}
+
+/*
+ * Spare area in Hamming layouts is not protected by the ECC engine (even if
+ * it appears before the ECC bytes when reading), the ->read_oob_raw() function
+ * also stands for ->read_oob().
+ */
+static int marvell_nfc_hw_ecc_hmg_read_oob_raw(struct nand_chip *chip, int page)
+{
+	u8 *buf = nand_get_data_buf(chip);
+
+	marvell_nfc_select_target(chip, chip->cur_cs);
+	return marvell_nfc_hw_ecc_hmg_do_read_page(chip, buf, chip->oob_poi,
+						   true, page);
+}
+
+/* Hamming write helpers */
+static int marvell_nfc_hw_ecc_hmg_do_write_page(struct nand_chip *chip,
+						const u8 *data_buf,
+						const u8 *oob_buf, bool raw,
+						int page)
+{
+	const struct nand_sdr_timings *sdr =
+		nand_get_sdr_timings(nand_get_interface_config(chip));
+	struct marvell_nand_chip *marvell_nand = to_marvell_nand(chip);
+	struct marvell_nfc *nfc = to_marvell_nfc(chip->controller);
+	const struct marvell_hw_ecc_layout *lt = to_marvell_nand(chip)->layout;
+	struct marvell_nfc_op nfc_op = {
+		.ndcb[0] = NDCB0_CMD_TYPE(TYPE_WRITE) |
+			   NDCB0_ADDR_CYC(marvell_nand->addr_cyc) |
+			   NDCB0_CMD1(NAND_CMD_SEQIN) |
+			   NDCB0_CMD2(NAND_CMD_PAGEPROG) |
+			   NDCB0_DBC,
+		.ndcb[1] = NDCB1_ADDRS_PAGE(page),
+		.ndcb[2] = NDCB2_ADDR5_PAGE(page),
+	};
+	unsigned int oob_bytes = lt->spare_bytes + (raw ? lt->ecc_bytes : 0);
+	u8 status;
+	int ret;
+
+	/* NFCv2 needs more information about the operation being executed */
+	if (nfc->caps->is_nfcv2)
+		nfc_op.ndcb[0] |= NDCB0_CMD_XTYPE(XTYPE_MONOLITHIC_RW);
+
+	ret = marvell_nfc_prepare_cmd(chip);
+	if (ret)
+		return ret;
+
+	marvell_nfc_send_cmd(chip, &nfc_op);
+	ret = marvell_nfc_end_cmd(chip, NDSR_WRDREQ,
+				  "WRDREQ while loading FIFO (data)");
+	if (ret)
+		return ret;
+
+	/* Write the page then the OOB area */
+	if (nfc->use_dma) {
+		memcpy(nfc->dma_buf, data_buf, lt->data_bytes);
+		memcpy(nfc->dma_buf + lt->data_bytes, oob_buf, oob_bytes);
+		marvell_nfc_xfer_data_dma(nfc, DMA_TO_DEVICE, lt->data_bytes +
+					  lt->ecc_bytes + lt->spare_bytes);
+	} else {
+		marvell_nfc_xfer_data_out_pio(nfc, data_buf, lt->data_bytes);
+		marvell_nfc_xfer_data_out_pio(nfc, oob_buf, oob_bytes);
+	}
+
+	ret = marvell_nfc_wait_cmdd(chip);
+	if (ret)
+		return ret;
+
+	ret = marvell_nfc_wait_op(chip,
+				  PSEC_TO_MSEC(sdr->tPROG_max));
+	if (ret)
+		return ret;
+
+	/* Check write status on the chip side */
+	ret = nand_status_op(chip, &status);
+	if (ret)
+		return ret;
+
+	if (status & NAND_STATUS_FAIL)
+		return -EIO;
+
+	return 0;
+}
+
+static int marvell_nfc_hw_ecc_hmg_write_page_raw(struct nand_chip *chip,
+						 const u8 *buf,
+						 int oob_required, int page)
+{
+	marvell_nfc_select_target(chip, chip->cur_cs);
+	return marvell_nfc_hw_ecc_hmg_do_write_page(chip, buf, chip->oob_poi,
+						    true, page);
+}
+
+static int marvell_nfc_hw_ecc_hmg_write_page(struct nand_chip *chip,
+					     const u8 *buf,
+					     int oob_required, int page)
+{
+	int ret;
+
+	marvell_nfc_select_target(chip, chip->cur_cs);
+	marvell_nfc_enable_hw_ecc(chip);
+	ret = marvell_nfc_hw_ecc_hmg_do_write_page(chip, buf, chip->oob_poi,
+						   false, page);
+	marvell_nfc_disable_hw_ecc(chip);
+
+	return ret;
+}
+
+/*
+ * Spare area in Hamming layouts is not protected by the ECC engine (even if
+ * it appears before the ECC bytes when reading), the ->write_oob_raw() function
+ * also stands for ->write_oob().
+ */
+static int marvell_nfc_hw_ecc_hmg_write_oob_raw(struct nand_chip *chip,
+						int page)
+{
+	struct mtd_info *mtd = nand_to_mtd(chip);
+	u8 *buf = nand_get_data_buf(chip);
+
+	memset(buf, 0xFF, mtd->writesize);
+
+	marvell_nfc_select_target(chip, chip->cur_cs);
+	return marvell_nfc_hw_ecc_hmg_do_write_page(chip, buf, chip->oob_poi,
+						    true, page);
+}
+
+/* BCH read helpers */
+static int marvell_nfc_hw_ecc_bch_read_page_raw(struct nand_chip *chip, u8 *buf,
+						int oob_required, int page)
+{
+	struct mtd_info *mtd = nand_to_mtd(chip);
+	const struct marvell_hw_ecc_layout *lt = to_marvell_nand(chip)->layout;
+	u8 *oob = chip->oob_poi;
+	int chunk_size = lt->data_bytes + lt->spare_bytes + lt->ecc_bytes;
+	int ecc_offset = (lt->full_chunk_cnt * lt->spare_bytes) +
+		lt->last_spare_bytes;
+	int data_len = lt->data_bytes;
+	int spare_len = lt->spare_bytes;
+	int ecc_len = lt->ecc_bytes;
+	int chunk;
+
+	marvell_nfc_select_target(chip, chip->cur_cs);
+
+	if (oob_required)
+		memset(chip->oob_poi, 0xFF, mtd->oobsize);
+
+	nand_read_page_op(chip, page, 0, NULL, 0);
+
+	for (chunk = 0; chunk < lt->nchunks; chunk++) {
+		/* Update last chunk length */
+		if (chunk >= lt->full_chunk_cnt) {
+			data_len = lt->last_data_bytes;
+			spare_len = lt->last_spare_bytes;
+			ecc_len = lt->last_ecc_bytes;
+		}
+
+		/* Read data bytes*/
+		nand_change_read_column_op(chip, chunk * chunk_size,
+					   buf + (lt->data_bytes * chunk),
+					   data_len, false);
+
+		/* Read spare bytes */
+		nand_read_data_op(chip, oob + (lt->spare_bytes * chunk),
+				  spare_len, false, false);
+
+		/* Read ECC bytes */
+		nand_read_data_op(chip, oob + ecc_offset +
+				  (ALIGN(lt->ecc_bytes, 32) * chunk),
+				  ecc_len, false, false);
+	}
+
+	return 0;
+}
+
+static void marvell_nfc_hw_ecc_bch_read_chunk(struct nand_chip *chip, int chunk,
+					      u8 *data, unsigned int data_len,
+					      u8 *spare, unsigned int spare_len,
+					      int page)
+{
+	struct marvell_nand_chip *marvell_nand = to_marvell_nand(chip);
+	struct marvell_nfc *nfc = to_marvell_nfc(chip->controller);
+	const struct marvell_hw_ecc_layout *lt = to_marvell_nand(chip)->layout;
+	int i, ret;
+	struct marvell_nfc_op nfc_op = {
+		.ndcb[0] = NDCB0_CMD_TYPE(TYPE_READ) |
+			   NDCB0_ADDR_CYC(marvell_nand->addr_cyc) |
+			   NDCB0_LEN_OVRD,
+		.ndcb[1] = NDCB1_ADDRS_PAGE(page),
+		.ndcb[2] = NDCB2_ADDR5_PAGE(page),
+		.ndcb[3] = data_len + spare_len,
+	};
+
+	ret = marvell_nfc_prepare_cmd(chip);
+	if (ret)
+		return;
+
+	if (chunk == 0)
+		nfc_op.ndcb[0] |= NDCB0_DBC |
+				  NDCB0_CMD1(NAND_CMD_READ0) |
+				  NDCB0_CMD2(NAND_CMD_READSTART);
+
+	/*
+	 * Trigger the monolithic read on the first chunk, then naked read on
+	 * intermediate chunks and finally a last naked read on the last chunk.
+	 */
+	if (chunk == 0)
+		nfc_op.ndcb[0] |= NDCB0_CMD_XTYPE(XTYPE_MONOLITHIC_RW);
+	else if (chunk < lt->nchunks - 1)
+		nfc_op.ndcb[0] |= NDCB0_CMD_XTYPE(XTYPE_NAKED_RW);
+	else
+		nfc_op.ndcb[0] |= NDCB0_CMD_XTYPE(XTYPE_LAST_NAKED_RW);
+
+	marvell_nfc_send_cmd(chip, &nfc_op);
+
+	/*
+	 * According to the datasheet, when reading from NDDB
+	 * with BCH enabled, after each 32 bytes reads, we
+	 * have to make sure that the NDSR.RDDREQ bit is set.
+	 *
+	 * Drain the FIFO, 8 32-bit reads at a time, and skip
+	 * the polling on the last read.
+	 *
+	 * Length is a multiple of 32 bytes, hence it is a multiple of 8 too.
+	 */
+	for (i = 0; i < data_len; i += FIFO_DEPTH * BCH_SEQ_READS) {
+		marvell_nfc_end_cmd(chip, NDSR_RDDREQ,
+				    "RDDREQ while draining FIFO (data)");
+		marvell_nfc_xfer_data_in_pio(nfc, data,
+					     FIFO_DEPTH * BCH_SEQ_READS);
+		data += FIFO_DEPTH * BCH_SEQ_READS;
+	}
+
+	for (i = 0; i < spare_len; i += FIFO_DEPTH * BCH_SEQ_READS) {
+		marvell_nfc_end_cmd(chip, NDSR_RDDREQ,
+				    "RDDREQ while draining FIFO (OOB)");
+		marvell_nfc_xfer_data_in_pio(nfc, spare,
+					     FIFO_DEPTH * BCH_SEQ_READS);
+		spare += FIFO_DEPTH * BCH_SEQ_READS;
+	}
+}
+
+static int marvell_nfc_hw_ecc_bch_read_page(struct nand_chip *chip,
+					    u8 *buf, int oob_required,
+					    int page)
+{
+	struct mtd_info *mtd = nand_to_mtd(chip);
+	const struct marvell_hw_ecc_layout *lt = to_marvell_nand(chip)->layout;
+	int data_len = lt->data_bytes, spare_len = lt->spare_bytes;
+	u8 *data = buf, *spare = chip->oob_poi;
+	int max_bitflips = 0;
+	u32 failure_mask = 0;
+	int chunk, ret;
+
+	marvell_nfc_select_target(chip, chip->cur_cs);
+
+	/*
+	 * With BCH, OOB is not fully used (and thus not read entirely), not
+	 * expected bytes could show up at the end of the OOB buffer if not
+	 * explicitly erased.
+	 */
+	if (oob_required)
+		memset(chip->oob_poi, 0xFF, mtd->oobsize);
+
+	marvell_nfc_enable_hw_ecc(chip);
+
+	for (chunk = 0; chunk < lt->nchunks; chunk++) {
+		/* Update length for the last chunk */
+		if (chunk >= lt->full_chunk_cnt) {
+			data_len = lt->last_data_bytes;
+			spare_len = lt->last_spare_bytes;
+		}
+
+		/* Read the chunk and detect number of bitflips */
+		marvell_nfc_hw_ecc_bch_read_chunk(chip, chunk, data, data_len,
+						  spare, spare_len, page);
+		ret = marvell_nfc_hw_ecc_check_bitflips(chip, &max_bitflips);
+		if (ret)
+			failure_mask |= BIT(chunk);
+
+		data += data_len;
+		spare += spare_len;
+	}
+
+	marvell_nfc_disable_hw_ecc(chip);
+
+	if (!failure_mask)
+		return max_bitflips;
+
+	/*
+	 * Please note that dumping the ECC bytes during a normal read with OOB
+	 * area would add a significant overhead as ECC bytes are "consumed" by
+	 * the controller in normal mode and must be re-read in raw mode. To
+	 * avoid dropping the performances, we prefer not to include them. The
+	 * user should re-read the page in raw mode if ECC bytes are required.
+	 */
+
+	/*
+	 * In case there is any subpage read error, we usually re-read only ECC
+	 * bytes in raw mode and check if the whole page is empty. In this case,
+	 * it is normal that the ECC check failed and we just ignore the error.
+	 *
+	 * However, it has been empirically observed that for some layouts (e.g
+	 * 2k page, 8b strength per 512B chunk), the controller tries to correct
+	 * bits and may create itself bitflips in the erased area. To overcome
+	 * this strange behavior, the whole page is re-read in raw mode, not
+	 * only the ECC bytes.
+	 */
+	for (chunk = 0; chunk < lt->nchunks; chunk++) {
+		int data_off_in_page, spare_off_in_page, ecc_off_in_page;
+		int data_off, spare_off, ecc_off;
+		int data_len, spare_len, ecc_len;
+
+		/* No failure reported for this chunk, move to the next one */
+		if (!(failure_mask & BIT(chunk)))
+			continue;
+
+		data_off_in_page = chunk * (lt->data_bytes + lt->spare_bytes +
+					    lt->ecc_bytes);
+		spare_off_in_page = data_off_in_page +
+			(chunk < lt->full_chunk_cnt ? lt->data_bytes :
+						      lt->last_data_bytes);
+		ecc_off_in_page = spare_off_in_page +
+			(chunk < lt->full_chunk_cnt ? lt->spare_bytes :
+						      lt->last_spare_bytes);
+
+		data_off = chunk * lt->data_bytes;
+		spare_off = chunk * lt->spare_bytes;
+		ecc_off = (lt->full_chunk_cnt * lt->spare_bytes) +
+			  lt->last_spare_bytes +
+			  (chunk * (lt->ecc_bytes + 2));
+
+		data_len = chunk < lt->full_chunk_cnt ? lt->data_bytes :
+							lt->last_data_bytes;
+		spare_len = chunk < lt->full_chunk_cnt ? lt->spare_bytes :
+							 lt->last_spare_bytes;
+		ecc_len = chunk < lt->full_chunk_cnt ? lt->ecc_bytes :
+						       lt->last_ecc_bytes;
+
+		/*
+		 * Only re-read the ECC bytes, unless we are using the 2k/8b
+		 * layout which is buggy in the sense that the ECC engine will
+		 * try to correct data bytes anyway, creating bitflips. In this
+		 * case, re-read the entire page.
+		 */
+		if (lt->writesize == 2048 && lt->strength == 8) {
+			nand_change_read_column_op(chip, data_off_in_page,
+						   buf + data_off, data_len,
+						   false);
+			nand_change_read_column_op(chip, spare_off_in_page,
+						   chip->oob_poi + spare_off, spare_len,
+						   false);
+		}
+
+		nand_change_read_column_op(chip, ecc_off_in_page,
+					   chip->oob_poi + ecc_off, ecc_len,
+					   false);
+
+		/* Check the entire chunk (data + spare + ecc) for emptyness */
+		marvell_nfc_check_empty_chunk(chip, buf + data_off, data_len,
+					      chip->oob_poi + spare_off, spare_len,
+					      chip->oob_poi + ecc_off, ecc_len,
+					      &max_bitflips);
+	}
+
+	return max_bitflips;
+}
+
+static int marvell_nfc_hw_ecc_bch_read_oob_raw(struct nand_chip *chip, int page)
+{
+	u8 *buf = nand_get_data_buf(chip);
+
+	return chip->ecc.read_page_raw(chip, buf, true, page);
+}
+
+static int marvell_nfc_hw_ecc_bch_read_oob(struct nand_chip *chip, int page)
+{
+	u8 *buf = nand_get_data_buf(chip);
+
+	return chip->ecc.read_page(chip, buf, true, page);
+}
+
+/* BCH write helpers */
+static int marvell_nfc_hw_ecc_bch_write_page_raw(struct nand_chip *chip,
+						 const u8 *buf,
+						 int oob_required, int page)
+{
+	const struct marvell_hw_ecc_layout *lt = to_marvell_nand(chip)->layout;
+	int full_chunk_size = lt->data_bytes + lt->spare_bytes + lt->ecc_bytes;
+	int data_len = lt->data_bytes;
+	int spare_len = lt->spare_bytes;
+	int ecc_len = lt->ecc_bytes;
+	int spare_offset = 0;
+	int ecc_offset = (lt->full_chunk_cnt * lt->spare_bytes) +
+		lt->last_spare_bytes;
+	int chunk;
+
+	marvell_nfc_select_target(chip, chip->cur_cs);
+
+	nand_prog_page_begin_op(chip, page, 0, NULL, 0);
+
+	for (chunk = 0; chunk < lt->nchunks; chunk++) {
+		if (chunk >= lt->full_chunk_cnt) {
+			data_len = lt->last_data_bytes;
+			spare_len = lt->last_spare_bytes;
+			ecc_len = lt->last_ecc_bytes;
+		}
+
+		/* Point to the column of the next chunk */
+		nand_change_write_column_op(chip, chunk * full_chunk_size,
+					    NULL, 0, false);
+
+		/* Write the data */
+		nand_write_data_op(chip, buf + (chunk * lt->data_bytes),
+				   data_len, false);
+
+		if (!oob_required)
+			continue;
+
+		/* Write the spare bytes */
+		if (spare_len)
+			nand_write_data_op(chip, chip->oob_poi + spare_offset,
+					   spare_len, false);
+
+		/* Write the ECC bytes */
+		if (ecc_len)
+			nand_write_data_op(chip, chip->oob_poi + ecc_offset,
+					   ecc_len, false);
+
+		spare_offset += spare_len;
+		ecc_offset += ALIGN(ecc_len, 32);
+	}
+
+	return nand_prog_page_end_op(chip);
+}
+
+static int
+marvell_nfc_hw_ecc_bch_write_chunk(struct nand_chip *chip, int chunk,
+				   const u8 *data, unsigned int data_len,
+				   const u8 *spare, unsigned int spare_len,
+				   int page)
+{
+	struct marvell_nand_chip *marvell_nand = to_marvell_nand(chip);
+	struct marvell_nfc *nfc = to_marvell_nfc(chip->controller);
+	const struct marvell_hw_ecc_layout *lt = to_marvell_nand(chip)->layout;
+	u32 xtype;
+	int ret;
+	struct marvell_nfc_op nfc_op = {
+		.ndcb[0] = NDCB0_CMD_TYPE(TYPE_WRITE) | NDCB0_LEN_OVRD,
+		.ndcb[3] = data_len + spare_len,
+	};
+
+	/*
+	 * First operation dispatches the CMD_SEQIN command, issue the address
+	 * cycles and asks for the first chunk of data.
+	 * All operations in the middle (if any) will issue a naked write and
+	 * also ask for data.
+	 * Last operation (if any) asks for the last chunk of data through a
+	 * last naked write.
+	 */
+	if (chunk == 0) {
+		if (lt->nchunks == 1)
+			xtype = XTYPE_MONOLITHIC_RW;
+		else
+			xtype = XTYPE_WRITE_DISPATCH;
+
+		nfc_op.ndcb[0] |= NDCB0_CMD_XTYPE(xtype) |
+				  NDCB0_ADDR_CYC(marvell_nand->addr_cyc) |
+				  NDCB0_CMD1(NAND_CMD_SEQIN);
+		nfc_op.ndcb[1] |= NDCB1_ADDRS_PAGE(page);
+		nfc_op.ndcb[2] |= NDCB2_ADDR5_PAGE(page);
+	} else if (chunk < lt->nchunks - 1) {
+		nfc_op.ndcb[0] |= NDCB0_CMD_XTYPE(XTYPE_NAKED_RW);
+	} else {
+		nfc_op.ndcb[0] |= NDCB0_CMD_XTYPE(XTYPE_LAST_NAKED_RW);
+	}
+
+	/* Always dispatch the PAGEPROG command on the last chunk */
+	if (chunk == lt->nchunks - 1)
+		nfc_op.ndcb[0] |= NDCB0_CMD2(NAND_CMD_PAGEPROG) | NDCB0_DBC;
+
+	ret = marvell_nfc_prepare_cmd(chip);
+	if (ret)
+		return ret;
+
+	marvell_nfc_send_cmd(chip, &nfc_op);
+	ret = marvell_nfc_end_cmd(chip, NDSR_WRDREQ,
+				  "WRDREQ while loading FIFO (data)");
+	if (ret)
+		return ret;
+
+	/* Transfer the contents */
+	iowrite32_rep(nfc->regs + NDDB, data, FIFO_REP(data_len));
+	iowrite32_rep(nfc->regs + NDDB, spare, FIFO_REP(spare_len));
+
+	return 0;
+}
+
+static int marvell_nfc_hw_ecc_bch_write_page(struct nand_chip *chip,
+					     const u8 *buf,
+					     int oob_required, int page)
+{
+	const struct nand_sdr_timings *sdr =
+		nand_get_sdr_timings(nand_get_interface_config(chip));
+	struct mtd_info *mtd = nand_to_mtd(chip);
+	const struct marvell_hw_ecc_layout *lt = to_marvell_nand(chip)->layout;
+	const u8 *data = buf;
+	const u8 *spare = chip->oob_poi;
+	int data_len = lt->data_bytes;
+	int spare_len = lt->spare_bytes;
+	int chunk, ret;
+	u8 status;
+
+	marvell_nfc_select_target(chip, chip->cur_cs);
+
+	/* Spare data will be written anyway, so clear it to avoid garbage */
+	if (!oob_required)
+		memset(chip->oob_poi, 0xFF, mtd->oobsize);
+
+	marvell_nfc_enable_hw_ecc(chip);
+
+	for (chunk = 0; chunk < lt->nchunks; chunk++) {
+		if (chunk >= lt->full_chunk_cnt) {
+			data_len = lt->last_data_bytes;
+			spare_len = lt->last_spare_bytes;
+		}
+
+		marvell_nfc_hw_ecc_bch_write_chunk(chip, chunk, data, data_len,
+						   spare, spare_len, page);
+		data += data_len;
+		spare += spare_len;
+
+		/*
+		 * Waiting only for CMDD or PAGED is not enough, ECC are
+		 * partially written. No flag is set once the operation is
+		 * really finished but the ND_RUN bit is cleared, so wait for it
+		 * before stepping into the next command.
+		 */
+		marvell_nfc_wait_ndrun(chip);
+	}
+
+	ret = marvell_nfc_wait_op(chip, PSEC_TO_MSEC(sdr->tPROG_max));
+
+	marvell_nfc_disable_hw_ecc(chip);
+
+	if (ret)
+		return ret;
+
+	/* Check write status on the chip side */
+	ret = nand_status_op(chip, &status);
+	if (ret)
+		return ret;
+
+	if (status & NAND_STATUS_FAIL)
+		return -EIO;
+
+	return 0;
+}
+
+static int marvell_nfc_hw_ecc_bch_write_oob_raw(struct nand_chip *chip,
+						int page)
+{
+	struct mtd_info *mtd = nand_to_mtd(chip);
+	u8 *buf = nand_get_data_buf(chip);
+
+	memset(buf, 0xFF, mtd->writesize);
+
+	return chip->ecc.write_page_raw(chip, buf, true, page);
+}
+
+static int marvell_nfc_hw_ecc_bch_write_oob(struct nand_chip *chip, int page)
+{
+	struct mtd_info *mtd = nand_to_mtd(chip);
+	u8 *buf = nand_get_data_buf(chip);
+
+	memset(buf, 0xFF, mtd->writesize);
+
+	return chip->ecc.write_page(chip, buf, true, page);
+}
+
+/* NAND framework ->exec_op() hooks and related helpers */
+static void marvell_nfc_parse_instructions(struct nand_chip *chip,
+					   const struct nand_subop *subop,
+					   struct marvell_nfc_op *nfc_op)
+{
+	const struct nand_op_instr *instr = NULL;
+	struct marvell_nfc *nfc = to_marvell_nfc(chip->controller);
+	bool first_cmd = true;
+	unsigned int op_id;
+	int i;
+
+	/* Reset the input structure as most of its fields will be OR'ed */
+	memset(nfc_op, 0, sizeof(struct marvell_nfc_op));
+
+	for (op_id = 0; op_id < subop->ninstrs; op_id++) {
+		unsigned int offset, naddrs;
+		const u8 *addrs;
+		int len;
+
+		instr = &subop->instrs[op_id];
+
+		switch (instr->type) {
+		case NAND_OP_CMD_INSTR:
+			if (first_cmd)
+				nfc_op->ndcb[0] |=
+					NDCB0_CMD1(instr->ctx.cmd.opcode);
+			else
+				nfc_op->ndcb[0] |=
+					NDCB0_CMD2(instr->ctx.cmd.opcode) |
+					NDCB0_DBC;
+
+			nfc_op->cle_ale_delay_ns = instr->delay_ns;
+			first_cmd = false;
+			break;
+
+		case NAND_OP_ADDR_INSTR:
+			offset = nand_subop_get_addr_start_off(subop, op_id);
+			naddrs = nand_subop_get_num_addr_cyc(subop, op_id);
+			addrs = &instr->ctx.addr.addrs[offset];
+
+			nfc_op->ndcb[0] |= NDCB0_ADDR_CYC(naddrs);
+
+			for (i = 0; i < min_t(unsigned int, 4, naddrs); i++)
+				nfc_op->ndcb[1] |= addrs[i] << (8 * i);
+
+			if (naddrs >= 5)
+				nfc_op->ndcb[2] |= NDCB2_ADDR5_CYC(addrs[4]);
+			if (naddrs >= 6)
+				nfc_op->ndcb[3] |= NDCB3_ADDR6_CYC(addrs[5]);
+			if (naddrs == 7)
+				nfc_op->ndcb[3] |= NDCB3_ADDR7_CYC(addrs[6]);
+
+			nfc_op->cle_ale_delay_ns = instr->delay_ns;
+			break;
+
+		case NAND_OP_DATA_IN_INSTR:
+			nfc_op->data_instr = instr;
+			nfc_op->data_instr_idx = op_id;
+			nfc_op->ndcb[0] |= NDCB0_CMD_TYPE(TYPE_READ);
+			if (nfc->caps->is_nfcv2) {
+				nfc_op->ndcb[0] |=
+					NDCB0_CMD_XTYPE(XTYPE_MONOLITHIC_RW) |
+					NDCB0_LEN_OVRD;
+				len = nand_subop_get_data_len(subop, op_id);
+				nfc_op->ndcb[3] |= round_up(len, FIFO_DEPTH);
+			}
+			nfc_op->data_delay_ns = instr->delay_ns;
+			break;
+
+		case NAND_OP_DATA_OUT_INSTR:
+			nfc_op->data_instr = instr;
+			nfc_op->data_instr_idx = op_id;
+			nfc_op->ndcb[0] |= NDCB0_CMD_TYPE(TYPE_WRITE);
+			if (nfc->caps->is_nfcv2) {
+				nfc_op->ndcb[0] |=
+					NDCB0_CMD_XTYPE(XTYPE_MONOLITHIC_RW) |
+					NDCB0_LEN_OVRD;
+				len = nand_subop_get_data_len(subop, op_id);
+				nfc_op->ndcb[3] |= round_up(len, FIFO_DEPTH);
+			}
+			nfc_op->data_delay_ns = instr->delay_ns;
+			break;
+
+		case NAND_OP_WAITRDY_INSTR:
+			nfc_op->rdy_timeout_ms = instr->ctx.waitrdy.timeout_ms;
+			nfc_op->rdy_delay_ns = instr->delay_ns;
+			break;
+		}
+	}
+}
+
+static int marvell_nfc_xfer_data_pio(struct nand_chip *chip,
+				     const struct nand_subop *subop,
+				     struct marvell_nfc_op *nfc_op)
+{
+	struct marvell_nfc *nfc = to_marvell_nfc(chip->controller);
+	const struct nand_op_instr *instr = nfc_op->data_instr;
+	unsigned int op_id = nfc_op->data_instr_idx;
+	unsigned int len = nand_subop_get_data_len(subop, op_id);
+	unsigned int offset = nand_subop_get_data_start_off(subop, op_id);
+	bool reading = (instr->type == NAND_OP_DATA_IN_INSTR);
+	int ret;
+
+	if (instr->ctx.data.force_8bit)
+		marvell_nfc_force_byte_access(chip, true);
+
+	if (reading) {
+		u8 *in = instr->ctx.data.buf.in + offset;
+
+		ret = marvell_nfc_xfer_data_in_pio(nfc, in, len);
+	} else {
+		const u8 *out = instr->ctx.data.buf.out + offset;
+
+		ret = marvell_nfc_xfer_data_out_pio(nfc, out, len);
+	}
+
+	if (instr->ctx.data.force_8bit)
+		marvell_nfc_force_byte_access(chip, false);
+
+	return ret;
+}
+
+static int marvell_nfc_monolithic_access_exec(struct nand_chip *chip,
+					      const struct nand_subop *subop)
+{
+	struct marvell_nfc_op nfc_op;
+	bool reading;
+	int ret;
+
+	marvell_nfc_parse_instructions(chip, subop, &nfc_op);
+	reading = (nfc_op.data_instr->type == NAND_OP_DATA_IN_INSTR);
+
+	ret = marvell_nfc_prepare_cmd(chip);
+	if (ret)
+		return ret;
+
+	marvell_nfc_send_cmd(chip, &nfc_op);
+	ret = marvell_nfc_end_cmd(chip, NDSR_RDDREQ | NDSR_WRDREQ,
+				  "RDDREQ/WRDREQ while draining raw data");
+	if (ret)
+		return ret;
+
+	cond_delay(nfc_op.cle_ale_delay_ns);
+
+	if (reading) {
+		if (nfc_op.rdy_timeout_ms) {
+			ret = marvell_nfc_wait_op(chip, nfc_op.rdy_timeout_ms);
+			if (ret)
+				return ret;
+		}
+
+		cond_delay(nfc_op.rdy_delay_ns);
+	}
+
+	marvell_nfc_xfer_data_pio(chip, subop, &nfc_op);
+	ret = marvell_nfc_wait_cmdd(chip);
+	if (ret)
+		return ret;
+
+	cond_delay(nfc_op.data_delay_ns);
+
+	if (!reading) {
+		if (nfc_op.rdy_timeout_ms) {
+			ret = marvell_nfc_wait_op(chip, nfc_op.rdy_timeout_ms);
+			if (ret)
+				return ret;
+		}
+
+		cond_delay(nfc_op.rdy_delay_ns);
+	}
+
+	/*
+	 * NDCR ND_RUN bit should be cleared automatically at the end of each
+	 * operation but experience shows that the behavior is buggy when it
+	 * comes to writes (with LEN_OVRD). Clear it by hand in this case.
+	 */
+	if (!reading) {
+		struct marvell_nfc *nfc = to_marvell_nfc(chip->controller);
+
+		writel_relaxed(readl(nfc->regs + NDCR) & ~NDCR_ND_RUN,
+			       nfc->regs + NDCR);
+	}
+
+	return 0;
+}
+
+static int marvell_nfc_naked_access_exec(struct nand_chip *chip,
+					 const struct nand_subop *subop)
+{
+	struct marvell_nfc_op nfc_op;
+	int ret;
+
+	marvell_nfc_parse_instructions(chip, subop, &nfc_op);
+
+	/*
+	 * Naked access are different in that they need to be flagged as naked
+	 * by the controller. Reset the controller registers fields that inform
+	 * on the type and refill them according to the ongoing operation.
+	 */
+	nfc_op.ndcb[0] &= ~(NDCB0_CMD_TYPE(TYPE_MASK) |
+			    NDCB0_CMD_XTYPE(XTYPE_MASK));
+	switch (subop->instrs[0].type) {
+	case NAND_OP_CMD_INSTR:
+		nfc_op.ndcb[0] |= NDCB0_CMD_TYPE(TYPE_NAKED_CMD);
+		break;
+	case NAND_OP_ADDR_INSTR:
+		nfc_op.ndcb[0] |= NDCB0_CMD_TYPE(TYPE_NAKED_ADDR);
+		break;
+	case NAND_OP_DATA_IN_INSTR:
+		nfc_op.ndcb[0] |= NDCB0_CMD_TYPE(TYPE_READ) |
+				  NDCB0_CMD_XTYPE(XTYPE_LAST_NAKED_RW);
+		break;
+	case NAND_OP_DATA_OUT_INSTR:
+		nfc_op.ndcb[0] |= NDCB0_CMD_TYPE(TYPE_WRITE) |
+				  NDCB0_CMD_XTYPE(XTYPE_LAST_NAKED_RW);
+		break;
+	default:
+		/* This should never happen */
+		break;
+	}
+
+	ret = marvell_nfc_prepare_cmd(chip);
+	if (ret)
+		return ret;
+
+	marvell_nfc_send_cmd(chip, &nfc_op);
+
+	if (!nfc_op.data_instr) {
+		ret = marvell_nfc_wait_cmdd(chip);
+		cond_delay(nfc_op.cle_ale_delay_ns);
+		return ret;
+	}
+
+	ret = marvell_nfc_end_cmd(chip, NDSR_RDDREQ | NDSR_WRDREQ,
+				  "RDDREQ/WRDREQ while draining raw data");
+	if (ret)
+		return ret;
+
+	marvell_nfc_xfer_data_pio(chip, subop, &nfc_op);
+	ret = marvell_nfc_wait_cmdd(chip);
+	if (ret)
+		return ret;
+
+	/*
+	 * NDCR ND_RUN bit should be cleared automatically at the end of each
+	 * operation but experience shows that the behavior is buggy when it
+	 * comes to writes (with LEN_OVRD). Clear it by hand in this case.
+	 */
+	if (subop->instrs[0].type == NAND_OP_DATA_OUT_INSTR) {
+		struct marvell_nfc *nfc = to_marvell_nfc(chip->controller);
+
+		writel_relaxed(readl(nfc->regs + NDCR) & ~NDCR_ND_RUN,
+			       nfc->regs + NDCR);
+	}
+
+	return 0;
+}
+
+static int marvell_nfc_naked_waitrdy_exec(struct nand_chip *chip,
+					  const struct nand_subop *subop)
+{
+	struct marvell_nfc_op nfc_op;
+	int ret;
+
+	marvell_nfc_parse_instructions(chip, subop, &nfc_op);
+
+	ret = marvell_nfc_wait_op(chip, nfc_op.rdy_timeout_ms);
+	cond_delay(nfc_op.rdy_delay_ns);
+
+	return ret;
+}
+
+static int marvell_nfc_read_id_type_exec(struct nand_chip *chip,
+					 const struct nand_subop *subop)
+{
+	struct marvell_nfc_op nfc_op;
+	int ret;
+
+	marvell_nfc_parse_instructions(chip, subop, &nfc_op);
+	nfc_op.ndcb[0] &= ~NDCB0_CMD_TYPE(TYPE_READ);
+	nfc_op.ndcb[0] |= NDCB0_CMD_TYPE(TYPE_READ_ID);
+
+	ret = marvell_nfc_prepare_cmd(chip);
+	if (ret)
+		return ret;
+
+	marvell_nfc_send_cmd(chip, &nfc_op);
+	ret = marvell_nfc_end_cmd(chip, NDSR_RDDREQ,
+				  "RDDREQ while reading ID");
+	if (ret)
+		return ret;
+
+	cond_delay(nfc_op.cle_ale_delay_ns);
+
+	if (nfc_op.rdy_timeout_ms) {
+		ret = marvell_nfc_wait_op(chip, nfc_op.rdy_timeout_ms);
+		if (ret)
+			return ret;
+	}
+
+	cond_delay(nfc_op.rdy_delay_ns);
+
+	marvell_nfc_xfer_data_pio(chip, subop, &nfc_op);
+	ret = marvell_nfc_wait_cmdd(chip);
+	if (ret)
+		return ret;
+
+	cond_delay(nfc_op.data_delay_ns);
+
+	return 0;
+}
+
+static int marvell_nfc_read_status_exec(struct nand_chip *chip,
+					const struct nand_subop *subop)
+{
+	struct marvell_nfc_op nfc_op;
+	int ret;
+
+	marvell_nfc_parse_instructions(chip, subop, &nfc_op);
+	nfc_op.ndcb[0] &= ~NDCB0_CMD_TYPE(TYPE_READ);
+	nfc_op.ndcb[0] |= NDCB0_CMD_TYPE(TYPE_STATUS);
+
+	ret = marvell_nfc_prepare_cmd(chip);
+	if (ret)
+		return ret;
+
+	marvell_nfc_send_cmd(chip, &nfc_op);
+	ret = marvell_nfc_end_cmd(chip, NDSR_RDDREQ,
+				  "RDDREQ while reading status");
+	if (ret)
+		return ret;
+
+	cond_delay(nfc_op.cle_ale_delay_ns);
+
+	if (nfc_op.rdy_timeout_ms) {
+		ret = marvell_nfc_wait_op(chip, nfc_op.rdy_timeout_ms);
+		if (ret)
+			return ret;
+	}
+
+	cond_delay(nfc_op.rdy_delay_ns);
+
+	marvell_nfc_xfer_data_pio(chip, subop, &nfc_op);
+	ret = marvell_nfc_wait_cmdd(chip);
+	if (ret)
+		return ret;
+
+	cond_delay(nfc_op.data_delay_ns);
+
+	return 0;
+}
+
+static int marvell_nfc_reset_cmd_type_exec(struct nand_chip *chip,
+					   const struct nand_subop *subop)
+{
+	struct marvell_nfc_op nfc_op;
+	int ret;
+
+	marvell_nfc_parse_instructions(chip, subop, &nfc_op);
+	nfc_op.ndcb[0] |= NDCB0_CMD_TYPE(TYPE_RESET);
+
+	ret = marvell_nfc_prepare_cmd(chip);
+	if (ret)
+		return ret;
+
+	marvell_nfc_send_cmd(chip, &nfc_op);
+	ret = marvell_nfc_wait_cmdd(chip);
+	if (ret)
+		return ret;
+
+	cond_delay(nfc_op.cle_ale_delay_ns);
+
+	ret = marvell_nfc_wait_op(chip, nfc_op.rdy_timeout_ms);
+	if (ret)
+		return ret;
+
+	cond_delay(nfc_op.rdy_delay_ns);
+
+	return 0;
+}
+
+static int marvell_nfc_erase_cmd_type_exec(struct nand_chip *chip,
+					   const struct nand_subop *subop)
+{
+	struct marvell_nfc_op nfc_op;
+	int ret;
+
+	marvell_nfc_parse_instructions(chip, subop, &nfc_op);
+	nfc_op.ndcb[0] |= NDCB0_CMD_TYPE(TYPE_ERASE);
+
+	ret = marvell_nfc_prepare_cmd(chip);
+	if (ret)
+		return ret;
+
+	marvell_nfc_send_cmd(chip, &nfc_op);
+	ret = marvell_nfc_wait_cmdd(chip);
+	if (ret)
+		return ret;
+
+	cond_delay(nfc_op.cle_ale_delay_ns);
+
+	ret = marvell_nfc_wait_op(chip, nfc_op.rdy_timeout_ms);
+	if (ret)
+		return ret;
+
+	cond_delay(nfc_op.rdy_delay_ns);
+
+	return 0;
+}
+
+static const struct nand_op_parser marvell_nfcv2_op_parser = NAND_OP_PARSER(
+	/* Monolithic reads/writes */
+	NAND_OP_PARSER_PATTERN(
+		marvell_nfc_monolithic_access_exec,
+		NAND_OP_PARSER_PAT_CMD_ELEM(false),
+		NAND_OP_PARSER_PAT_ADDR_ELEM(true, MAX_ADDRESS_CYC_NFCV2),
+		NAND_OP_PARSER_PAT_CMD_ELEM(true),
+		NAND_OP_PARSER_PAT_WAITRDY_ELEM(true),
+		NAND_OP_PARSER_PAT_DATA_IN_ELEM(false, MAX_CHUNK_SIZE)),
+	NAND_OP_PARSER_PATTERN(
+		marvell_nfc_monolithic_access_exec,
+		NAND_OP_PARSER_PAT_CMD_ELEM(false),
+		NAND_OP_PARSER_PAT_ADDR_ELEM(false, MAX_ADDRESS_CYC_NFCV2),
+		NAND_OP_PARSER_PAT_DATA_OUT_ELEM(false, MAX_CHUNK_SIZE),
+		NAND_OP_PARSER_PAT_CMD_ELEM(true),
+		NAND_OP_PARSER_PAT_WAITRDY_ELEM(true)),
+	/* Naked commands */
+	NAND_OP_PARSER_PATTERN(
+		marvell_nfc_naked_access_exec,
+		NAND_OP_PARSER_PAT_CMD_ELEM(false)),
+	NAND_OP_PARSER_PATTERN(
+		marvell_nfc_naked_access_exec,
+		NAND_OP_PARSER_PAT_ADDR_ELEM(false, MAX_ADDRESS_CYC_NFCV2)),
+	NAND_OP_PARSER_PATTERN(
+		marvell_nfc_naked_access_exec,
+		NAND_OP_PARSER_PAT_DATA_IN_ELEM(false, MAX_CHUNK_SIZE)),
+	NAND_OP_PARSER_PATTERN(
+		marvell_nfc_naked_access_exec,
+		NAND_OP_PARSER_PAT_DATA_OUT_ELEM(false, MAX_CHUNK_SIZE)),
+	NAND_OP_PARSER_PATTERN(
+		marvell_nfc_naked_waitrdy_exec,
+		NAND_OP_PARSER_PAT_WAITRDY_ELEM(false)),
+	);
+
+static const struct nand_op_parser marvell_nfcv1_op_parser = NAND_OP_PARSER(
+	/* Naked commands not supported, use a function for each pattern */
+	NAND_OP_PARSER_PATTERN(
+		marvell_nfc_read_id_type_exec,
+		NAND_OP_PARSER_PAT_CMD_ELEM(false),
+		NAND_OP_PARSER_PAT_ADDR_ELEM(false, MAX_ADDRESS_CYC_NFCV1),
+		NAND_OP_PARSER_PAT_DATA_IN_ELEM(false, 8)),
+	NAND_OP_PARSER_PATTERN(
+		marvell_nfc_erase_cmd_type_exec,
+		NAND_OP_PARSER_PAT_CMD_ELEM(false),
+		NAND_OP_PARSER_PAT_ADDR_ELEM(false, MAX_ADDRESS_CYC_NFCV1),
+		NAND_OP_PARSER_PAT_CMD_ELEM(false),
+		NAND_OP_PARSER_PAT_WAITRDY_ELEM(false)),
+	NAND_OP_PARSER_PATTERN(
+		marvell_nfc_read_status_exec,
+		NAND_OP_PARSER_PAT_CMD_ELEM(false),
+		NAND_OP_PARSER_PAT_DATA_IN_ELEM(false, 1)),
+	NAND_OP_PARSER_PATTERN(
+		marvell_nfc_reset_cmd_type_exec,
+		NAND_OP_PARSER_PAT_CMD_ELEM(false),
+		NAND_OP_PARSER_PAT_WAITRDY_ELEM(false)),
+	NAND_OP_PARSER_PATTERN(
+		marvell_nfc_naked_waitrdy_exec,
+		NAND_OP_PARSER_PAT_WAITRDY_ELEM(false)),
+	);
+
+static int marvell_nfc_exec_op(struct nand_chip *chip,
+			       const struct nand_operation *op,
+			       bool check_only)
+{
+	struct marvell_nfc *nfc = to_marvell_nfc(chip->controller);
+
+	if (!check_only)
+		marvell_nfc_select_target(chip, op->cs);
+
+	if (nfc->caps->is_nfcv2)
+		return nand_op_parser_exec_op(chip, &marvell_nfcv2_op_parser,
+					      op, check_only);
+	else
+		return nand_op_parser_exec_op(chip, &marvell_nfcv1_op_parser,
+					      op, check_only);
+}
+
+/*
+ * Layouts were broken in old pxa3xx_nand driver, these are supposed to be
+ * usable.
+ */
+static int marvell_nand_ooblayout_ecc(struct mtd_info *mtd, int section,
+				      struct mtd_oob_region *oobregion)
+{
+	struct nand_chip *chip = mtd_to_nand(mtd);
+	const struct marvell_hw_ecc_layout *lt = to_marvell_nand(chip)->layout;
+
+	if (section)
+		return -ERANGE;
+
+	oobregion->length = (lt->full_chunk_cnt * lt->ecc_bytes) +
+			    lt->last_ecc_bytes;
+	oobregion->offset = mtd->oobsize - oobregion->length;
+
+	return 0;
+}
+
+static int marvell_nand_ooblayout_free(struct mtd_info *mtd, int section,
+				       struct mtd_oob_region *oobregion)
+{
+	struct nand_chip *chip = mtd_to_nand(mtd);
+	const struct marvell_hw_ecc_layout *lt = to_marvell_nand(chip)->layout;
+
+	if (section)
+		return -ERANGE;
+
+	/*
+	 * Bootrom looks in bytes 0 & 5 for bad blocks for the
+	 * 4KB page / 4bit BCH combination.
+	 */
+	if (mtd->writesize == SZ_4K && lt->data_bytes == SZ_2K)
+		oobregion->offset = 6;
+	else
+		oobregion->offset = 2;
+
+	oobregion->length = (lt->full_chunk_cnt * lt->spare_bytes) +
+			    lt->last_spare_bytes - oobregion->offset;
+
+	return 0;
+}
+
+static const struct mtd_ooblayout_ops marvell_nand_ooblayout_ops = {
+	.ecc = marvell_nand_ooblayout_ecc,
+	.free = marvell_nand_ooblayout_free,
+};
+
+static int marvell_nand_hw_ecc_controller_init(struct mtd_info *mtd,
+					       struct nand_ecc_ctrl *ecc)
+{
+	struct nand_chip *chip = mtd_to_nand(mtd);
+	struct marvell_nfc *nfc = to_marvell_nfc(chip->controller);
+	const struct marvell_hw_ecc_layout *l;
+	int i;
+
+	if (!nfc->caps->is_nfcv2 &&
+	    (mtd->writesize + mtd->oobsize > MAX_CHUNK_SIZE)) {
+		dev_err(nfc->dev,
+			"NFCv1: writesize (%d) cannot be bigger than a chunk (%d)\n",
+			mtd->writesize, MAX_CHUNK_SIZE - mtd->oobsize);
+		return -ENOTSUPP;
+	}
+
+	to_marvell_nand(chip)->layout = NULL;
+	for (i = 0; i < ARRAY_SIZE(marvell_nfc_layouts); i++) {
+		l = &marvell_nfc_layouts[i];
+		if (mtd->writesize == l->writesize &&
+		    ecc->size == l->chunk && ecc->strength == l->strength) {
+			to_marvell_nand(chip)->layout = l;
+			break;
+		}
+	}
+
+	if (!to_marvell_nand(chip)->layout ||
+	    (!nfc->caps->is_nfcv2 && ecc->strength > 1)) {
+		dev_err(nfc->dev,
+			"ECC strength %d at page size %d is not supported\n",
+			ecc->strength, mtd->writesize);
+		return -ENOTSUPP;
+	}
+
+	/* Special care for the layout 2k/8-bit/512B  */
+	if (l->writesize == 2048 && l->strength == 8) {
+		if (mtd->oobsize < 128) {
+			dev_err(nfc->dev, "Requested layout needs at least 128 OOB bytes\n");
+			return -ENOTSUPP;
+		} else {
+			chip->bbt_options |= NAND_BBT_NO_OOB_BBM;
+		}
+	}
+
+	mtd_set_ooblayout(mtd, &marvell_nand_ooblayout_ops);
+	ecc->steps = l->nchunks;
+	ecc->size = l->data_bytes;
+
+	if (ecc->strength == 1) {
+		chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
+		ecc->read_page_raw = marvell_nfc_hw_ecc_hmg_read_page_raw;
+		ecc->read_page = marvell_nfc_hw_ecc_hmg_read_page;
+		ecc->read_oob_raw = marvell_nfc_hw_ecc_hmg_read_oob_raw;
+		ecc->read_oob = ecc->read_oob_raw;
+		ecc->write_page_raw = marvell_nfc_hw_ecc_hmg_write_page_raw;
+		ecc->write_page = marvell_nfc_hw_ecc_hmg_write_page;
+		ecc->write_oob_raw = marvell_nfc_hw_ecc_hmg_write_oob_raw;
+		ecc->write_oob = ecc->write_oob_raw;
+	} else {
+		chip->ecc.algo = NAND_ECC_ALGO_BCH;
+		ecc->strength = 16;
+		ecc->read_page_raw = marvell_nfc_hw_ecc_bch_read_page_raw;
+		ecc->read_page = marvell_nfc_hw_ecc_bch_read_page;
+		ecc->read_oob_raw = marvell_nfc_hw_ecc_bch_read_oob_raw;
+		ecc->read_oob = marvell_nfc_hw_ecc_bch_read_oob;
+		ecc->write_page_raw = marvell_nfc_hw_ecc_bch_write_page_raw;
+		ecc->write_page = marvell_nfc_hw_ecc_bch_write_page;
+		ecc->write_oob_raw = marvell_nfc_hw_ecc_bch_write_oob_raw;
+		ecc->write_oob = marvell_nfc_hw_ecc_bch_write_oob;
+	}
+
+	return 0;
+}
+
+static int marvell_nand_ecc_init(struct mtd_info *mtd,
+				 struct nand_ecc_ctrl *ecc)
+{
+	struct nand_chip *chip = mtd_to_nand(mtd);
+	const struct nand_ecc_props *requirements =
+		nanddev_get_ecc_requirements(&chip->base);
+	struct marvell_nfc *nfc = to_marvell_nfc(chip->controller);
+	int ret;
+
+	if (ecc->engine_type != NAND_ECC_ENGINE_TYPE_NONE &&
+	    (!ecc->size || !ecc->strength)) {
+		if (requirements->step_size && requirements->strength) {
+			ecc->size = requirements->step_size;
+			ecc->strength = requirements->strength;
+		} else {
+			dev_info(nfc->dev,
+				 "No minimum ECC strength, using 1b/512B\n");
+			ecc->size = 512;
+			ecc->strength = 1;
+		}
+	}
+
+	switch (ecc->engine_type) {
+	case NAND_ECC_ENGINE_TYPE_ON_HOST:
+		ret = marvell_nand_hw_ecc_controller_init(mtd, ecc);
+		if (ret)
+			return ret;
+		break;
+	case NAND_ECC_ENGINE_TYPE_NONE:
+	case NAND_ECC_ENGINE_TYPE_SOFT:
+	case NAND_ECC_ENGINE_TYPE_ON_DIE:
+		if (!nfc->caps->is_nfcv2 && mtd->writesize != SZ_512 &&
+		    mtd->writesize != SZ_2K) {
+			dev_err(nfc->dev, "NFCv1 cannot write %d bytes pages\n",
+				mtd->writesize);
+			return -EINVAL;
+		}
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static u8 bbt_pattern[] = {'M', 'V', 'B', 'b', 't', '0' };
+static u8 bbt_mirror_pattern[] = {'1', 't', 'b', 'B', 'V', 'M' };
+
+static struct nand_bbt_descr bbt_main_descr = {
+	.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE |
+		   NAND_BBT_2BIT | NAND_BBT_VERSION,
+	.offs =	8,
+	.len = 6,
+	.veroffs = 14,
+	.maxblocks = 8,	/* Last 8 blocks in each chip */
+	.pattern = bbt_pattern
+};
+
+static struct nand_bbt_descr bbt_mirror_descr = {
+	.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE |
+		   NAND_BBT_2BIT | NAND_BBT_VERSION,
+	.offs =	8,
+	.len = 6,
+	.veroffs = 14,
+	.maxblocks = 8,	/* Last 8 blocks in each chip */
+	.pattern = bbt_mirror_pattern
+};
+
+static int marvell_nfc_setup_interface(struct nand_chip *chip, int chipnr,
+				       const struct nand_interface_config *conf)
+{
+	struct marvell_nand_chip *marvell_nand = to_marvell_nand(chip);
+	struct marvell_nfc *nfc = to_marvell_nfc(chip->controller);
+	unsigned int period_ns = 1000000000 / clk_get_rate(nfc->core_clk) * 2;
+	const struct nand_sdr_timings *sdr;
+	struct marvell_nfc_timings nfc_tmg;
+	int read_delay;
+
+	sdr = nand_get_sdr_timings(conf);
+	if (IS_ERR(sdr))
+		return PTR_ERR(sdr);
+
+	/*
+	 * SDR timings are given in pico-seconds while NFC timings must be
+	 * expressed in NAND controller clock cycles, which is half of the
+	 * frequency of the accessible ECC clock retrieved by clk_get_rate().
+	 * This is not written anywhere in the datasheet but was observed
+	 * with an oscilloscope.
+	 *
+	 * NFC datasheet gives equations from which thoses calculations
+	 * are derived, they tend to be slightly more restrictives than the
+	 * given core timings and may improve the overall speed.
+	 */
+	nfc_tmg.tRP = TO_CYCLES(DIV_ROUND_UP(sdr->tRC_min, 2), period_ns) - 1;
+	nfc_tmg.tRH = nfc_tmg.tRP;
+	nfc_tmg.tWP = TO_CYCLES(DIV_ROUND_UP(sdr->tWC_min, 2), period_ns) - 1;
+	nfc_tmg.tWH = nfc_tmg.tWP;
+	nfc_tmg.tCS = TO_CYCLES(sdr->tCS_min, period_ns);
+	nfc_tmg.tCH = TO_CYCLES(sdr->tCH_min, period_ns) - 1;
+	nfc_tmg.tADL = TO_CYCLES(sdr->tADL_min, period_ns);
+	/*
+	 * Read delay is the time of propagation from SoC pins to NFC internal
+	 * logic. With non-EDO timings, this is MIN_RD_DEL_CNT clock cycles. In
+	 * EDO mode, an additional delay of tRH must be taken into account so
+	 * the data is sampled on the falling edge instead of the rising edge.
+	 */
+	read_delay = sdr->tRC_min >= 30000 ?
+		MIN_RD_DEL_CNT : MIN_RD_DEL_CNT + nfc_tmg.tRH;
+
+	nfc_tmg.tAR = TO_CYCLES(sdr->tAR_min, period_ns);
+	/*
+	 * tWHR and tRHW are supposed to be read to write delays (and vice
+	 * versa) but in some cases, ie. when doing a change column, they must
+	 * be greater than that to be sure tCCS delay is respected.
+	 */
+	nfc_tmg.tWHR = TO_CYCLES(max_t(int, sdr->tWHR_min, sdr->tCCS_min),
+				 period_ns) - 2,
+	nfc_tmg.tRHW = TO_CYCLES(max_t(int, sdr->tRHW_min, sdr->tCCS_min),
+				 period_ns);
+
+	/*
+	 * NFCv2: Use WAIT_MODE (wait for RB line), do not rely only on delays.
+	 * NFCv1: No WAIT_MODE, tR must be maximal.
+	 */
+	if (nfc->caps->is_nfcv2) {
+		nfc_tmg.tR = TO_CYCLES(sdr->tWB_max, period_ns);
+	} else {
+		nfc_tmg.tR = TO_CYCLES64(sdr->tWB_max + sdr->tR_max,
+					 period_ns);
+		if (nfc_tmg.tR + 3 > nfc_tmg.tCH)
+			nfc_tmg.tR = nfc_tmg.tCH - 3;
+		else
+			nfc_tmg.tR = 0;
+	}
+
+	if (chipnr < 0)
+		return 0;
+
+	marvell_nand->ndtr0 =
+		NDTR0_TRP(nfc_tmg.tRP) |
+		NDTR0_TRH(nfc_tmg.tRH) |
+		NDTR0_ETRP(nfc_tmg.tRP) |
+		NDTR0_TWP(nfc_tmg.tWP) |
+		NDTR0_TWH(nfc_tmg.tWH) |
+		NDTR0_TCS(nfc_tmg.tCS) |
+		NDTR0_TCH(nfc_tmg.tCH);
+
+	marvell_nand->ndtr1 =
+		NDTR1_TAR(nfc_tmg.tAR) |
+		NDTR1_TWHR(nfc_tmg.tWHR) |
+		NDTR1_TR(nfc_tmg.tR);
+
+	if (nfc->caps->is_nfcv2) {
+		marvell_nand->ndtr0 |=
+			NDTR0_RD_CNT_DEL(read_delay) |
+			NDTR0_SELCNTR |
+			NDTR0_TADL(nfc_tmg.tADL);
+
+		marvell_nand->ndtr1 |=
+			NDTR1_TRHW(nfc_tmg.tRHW) |
+			NDTR1_WAIT_MODE;
+	}
+
+	/*
+	 * Reset nfc->selected_chip so the next command will cause the timing
+	 * registers to be updated in marvell_nfc_select_target().
+	 */
+	nfc->selected_chip = NULL;
+
+	return 0;
+}
+
+static int marvell_nand_attach_chip(struct nand_chip *chip)
+{
+	struct mtd_info *mtd = nand_to_mtd(chip);
+	struct marvell_nand_chip *marvell_nand = to_marvell_nand(chip);
+	struct marvell_nfc *nfc = to_marvell_nfc(chip->controller);
+	struct pxa3xx_nand_platform_data *pdata = dev_get_platdata(nfc->dev);
+	int ret;
+
+	if (pdata && pdata->flash_bbt)
+		chip->bbt_options |= NAND_BBT_USE_FLASH;
+
+	if (chip->bbt_options & NAND_BBT_USE_FLASH) {
+		/*
+		 * We'll use a bad block table stored in-flash and don't
+		 * allow writing the bad block marker to the flash.
+		 */
+		chip->bbt_options |= NAND_BBT_NO_OOB_BBM;
+		chip->bbt_td = &bbt_main_descr;
+		chip->bbt_md = &bbt_mirror_descr;
+	}
+
+	/* Save the chip-specific fields of NDCR */
+	marvell_nand->ndcr = NDCR_PAGE_SZ(mtd->writesize);
+	if (chip->options & NAND_BUSWIDTH_16)
+		marvell_nand->ndcr |= NDCR_DWIDTH_M | NDCR_DWIDTH_C;
+
+	/*
+	 * On small page NANDs, only one cycle is needed to pass the
+	 * column address.
+	 */
+	if (mtd->writesize <= 512) {
+		marvell_nand->addr_cyc = 1;
+	} else {
+		marvell_nand->addr_cyc = 2;
+		marvell_nand->ndcr |= NDCR_RA_START;
+	}
+
+	/*
+	 * Now add the number of cycles needed to pass the row
+	 * address.
+	 *
+	 * Addressing a chip using CS 2 or 3 should also need the third row
+	 * cycle but due to inconsistance in the documentation and lack of
+	 * hardware to test this situation, this case is not supported.
+	 */
+	if (chip->options & NAND_ROW_ADDR_3)
+		marvell_nand->addr_cyc += 3;
+	else
+		marvell_nand->addr_cyc += 2;
+
+	if (pdata) {
+		chip->ecc.size = pdata->ecc_step_size;
+		chip->ecc.strength = pdata->ecc_strength;
+	}
+
+	ret = marvell_nand_ecc_init(mtd, &chip->ecc);
+	if (ret) {
+		dev_err(nfc->dev, "ECC init failed: %d\n", ret);
+		return ret;
+	}
+
+	if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST) {
+		/*
+		 * Subpage write not available with hardware ECC, prohibit also
+		 * subpage read as in userspace subpage access would still be
+		 * allowed and subpage write, if used, would lead to numerous
+		 * uncorrectable ECC errors.
+		 */
+		chip->options |= NAND_NO_SUBPAGE_WRITE;
+	}
+
+	if (pdata || nfc->caps->legacy_of_bindings) {
+		/*
+		 * We keep the MTD name unchanged to avoid breaking platforms
+		 * where the MTD cmdline parser is used and the bootloader
+		 * has not been updated to use the new naming scheme.
+		 */
+		mtd->name = "pxa3xx_nand-0";
+	} else if (!mtd->name) {
+		/*
+		 * If the new bindings are used and the bootloader has not been
+		 * updated to pass a new mtdparts parameter on the cmdline, you
+		 * should define the following property in your NAND node, ie:
+		 *
+		 *	label = "main-storage";
+		 *
+		 * This way, mtd->name will be set by the core when
+		 * nand_set_flash_node() is called.
+		 */
+		mtd->name = devm_kasprintf(nfc->dev, GFP_KERNEL,
+					   "%s:nand.%d", dev_name(nfc->dev),
+					   marvell_nand->sels[0].cs);
+		if (!mtd->name) {
+			dev_err(nfc->dev, "Failed to allocate mtd->name\n");
+			return -ENOMEM;
+		}
+	}
+
+	return 0;
+}
+
+static const struct nand_controller_ops marvell_nand_controller_ops = {
+	.attach_chip = marvell_nand_attach_chip,
+	.exec_op = marvell_nfc_exec_op,
+	.setup_interface = marvell_nfc_setup_interface,
+};
+
+static int marvell_nand_chip_init(struct device *dev, struct marvell_nfc *nfc,
+				  struct device_node *np)
+{
+	struct pxa3xx_nand_platform_data *pdata = dev_get_platdata(dev);
+	struct marvell_nand_chip *marvell_nand;
+	struct mtd_info *mtd;
+	struct nand_chip *chip;
+	int nsels, ret, i;
+	u32 cs, rb;
+
+	/*
+	 * The legacy "num-cs" property indicates the number of CS on the only
+	 * chip connected to the controller (legacy bindings does not support
+	 * more than one chip). The CS and RB pins are always the #0.
+	 *
+	 * When not using legacy bindings, a couple of "reg" and "nand-rb"
+	 * properties must be filled. For each chip, expressed as a subnode,
+	 * "reg" points to the CS lines and "nand-rb" to the RB line.
+	 */
+	if (pdata || nfc->caps->legacy_of_bindings) {
+		nsels = 1;
+	} else {
+		nsels = of_property_count_elems_of_size(np, "reg", sizeof(u32));
+		if (nsels <= 0) {
+			dev_err(dev, "missing/invalid reg property\n");
+			return -EINVAL;
+		}
+	}
+
+	/* Alloc the nand chip structure */
+	marvell_nand = devm_kzalloc(dev,
+				    struct_size(marvell_nand, sels, nsels),
+				    GFP_KERNEL);
+	if (!marvell_nand) {
+		dev_err(dev, "could not allocate chip structure\n");
+		return -ENOMEM;
+	}
+
+	marvell_nand->nsels = nsels;
+	marvell_nand->selected_die = -1;
+
+	for (i = 0; i < nsels; i++) {
+		if (pdata || nfc->caps->legacy_of_bindings) {
+			/*
+			 * Legacy bindings use the CS lines in natural
+			 * order (0, 1, ...)
+			 */
+			cs = i;
+		} else {
+			/* Retrieve CS id */
+			ret = of_property_read_u32_index(np, "reg", i, &cs);
+			if (ret) {
+				dev_err(dev, "could not retrieve reg property: %d\n",
+					ret);
+				return ret;
+			}
+		}
+
+		if (cs >= nfc->caps->max_cs_nb) {
+			dev_err(dev, "invalid reg value: %u (max CS = %d)\n",
+				cs, nfc->caps->max_cs_nb);
+			return -EINVAL;
+		}
+
+		if (test_and_set_bit(cs, &nfc->assigned_cs)) {
+			dev_err(dev, "CS %d already assigned\n", cs);
+			return -EINVAL;
+		}
+
+		/*
+		 * The cs variable represents the chip select id, which must be
+		 * converted in bit fields for NDCB0 and NDCB2 to select the
+		 * right chip. Unfortunately, due to a lack of information on
+		 * the subject and incoherent documentation, the user should not
+		 * use CS1 and CS3 at all as asserting them is not supported in
+		 * a reliable way (due to multiplexing inside ADDR5 field).
+		 */
+		marvell_nand->sels[i].cs = cs;
+		switch (cs) {
+		case 0:
+		case 2:
+			marvell_nand->sels[i].ndcb0_csel = 0;
+			break;
+		case 1:
+		case 3:
+			marvell_nand->sels[i].ndcb0_csel = NDCB0_CSEL;
+			break;
+		default:
+			return -EINVAL;
+		}
+
+		/* Retrieve RB id */
+		if (pdata || nfc->caps->legacy_of_bindings) {
+			/* Legacy bindings always use RB #0 */
+			rb = 0;
+		} else {
+			ret = of_property_read_u32_index(np, "nand-rb", i,
+							 &rb);
+			if (ret) {
+				dev_err(dev,
+					"could not retrieve RB property: %d\n",
+					ret);
+				return ret;
+			}
+		}
+
+		if (rb >= nfc->caps->max_rb_nb) {
+			dev_err(dev, "invalid reg value: %u (max RB = %d)\n",
+				rb, nfc->caps->max_rb_nb);
+			return -EINVAL;
+		}
+
+		marvell_nand->sels[i].rb = rb;
+	}
+
+	chip = &marvell_nand->chip;
+	chip->controller = &nfc->controller;
+	nand_set_flash_node(chip, np);
+
+	if (of_property_read_bool(np, "marvell,nand-keep-config"))
+		chip->options |= NAND_KEEP_TIMINGS;
+
+	mtd = nand_to_mtd(chip);
+	mtd->dev.parent = dev;
+
+	/*
+	 * Default to HW ECC engine mode. If the nand-ecc-mode property is given
+	 * in the DT node, this entry will be overwritten in nand_scan_ident().
+	 */
+	chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
+
+	/*
+	 * Save a reference value for timing registers before
+	 * ->setup_interface() is called.
+	 */
+	marvell_nand->ndtr0 = readl_relaxed(nfc->regs + NDTR0);
+	marvell_nand->ndtr1 = readl_relaxed(nfc->regs + NDTR1);
+
+	chip->options |= NAND_BUSWIDTH_AUTO;
+
+	ret = nand_scan(chip, marvell_nand->nsels);
+	if (ret) {
+		dev_err(dev, "could not scan the nand chip\n");
+		return ret;
+	}
+
+	if (pdata)
+		/* Legacy bindings support only one chip */
+		ret = mtd_device_register(mtd, pdata->parts, pdata->nr_parts);
+	else
+		ret = mtd_device_register(mtd, NULL, 0);
+	if (ret) {
+		dev_err(dev, "failed to register mtd device: %d\n", ret);
+		nand_cleanup(chip);
+		return ret;
+	}
+
+	list_add_tail(&marvell_nand->node, &nfc->chips);
+
+	return 0;
+}
+
+static void marvell_nand_chips_cleanup(struct marvell_nfc *nfc)
+{
+	struct marvell_nand_chip *entry, *temp;
+	struct nand_chip *chip;
+	int ret;
+
+	list_for_each_entry_safe(entry, temp, &nfc->chips, node) {
+		chip = &entry->chip;
+		ret = mtd_device_unregister(nand_to_mtd(chip));
+		WARN_ON(ret);
+		nand_cleanup(chip);
+		list_del(&entry->node);
+	}
+}
+
+static int marvell_nand_chips_init(struct device *dev, struct marvell_nfc *nfc)
+{
+	struct device_node *np = dev->of_node;
+	struct device_node *nand_np;
+	int max_cs = nfc->caps->max_cs_nb;
+	int nchips;
+	int ret;
+
+	if (!np)
+		nchips = 1;
+	else
+		nchips = of_get_child_count(np);
+
+	if (nchips > max_cs) {
+		dev_err(dev, "too many NAND chips: %d (max = %d CS)\n", nchips,
+			max_cs);
+		return -EINVAL;
+	}
+
+	/*
+	 * Legacy bindings do not use child nodes to exhibit NAND chip
+	 * properties and layout. Instead, NAND properties are mixed with the
+	 * controller ones, and partitions are defined as direct subnodes of the
+	 * NAND controller node.
+	 */
+	if (nfc->caps->legacy_of_bindings) {
+		ret = marvell_nand_chip_init(dev, nfc, np);
+		return ret;
+	}
+
+	for_each_child_of_node(np, nand_np) {
+		ret = marvell_nand_chip_init(dev, nfc, nand_np);
+		if (ret) {
+			of_node_put(nand_np);
+			goto cleanup_chips;
+		}
+	}
+
+	return 0;
+
+cleanup_chips:
+	marvell_nand_chips_cleanup(nfc);
+
+	return ret;
+}
+
+static int marvell_nfc_init_dma(struct marvell_nfc *nfc)
+{
+	struct platform_device *pdev = container_of(nfc->dev,
+						    struct platform_device,
+						    dev);
+	struct dma_slave_config config = {};
+	struct resource *r;
+	int ret;
+
+	if (!IS_ENABLED(CONFIG_PXA_DMA)) {
+		dev_warn(nfc->dev,
+			 "DMA not enabled in configuration\n");
+		return -ENOTSUPP;
+	}
+
+	ret = dma_set_mask_and_coherent(nfc->dev, DMA_BIT_MASK(32));
+	if (ret)
+		return ret;
+
+	nfc->dma_chan =	dma_request_chan(nfc->dev, "data");
+	if (IS_ERR(nfc->dma_chan)) {
+		ret = PTR_ERR(nfc->dma_chan);
+		nfc->dma_chan = NULL;
+		return dev_err_probe(nfc->dev, ret, "DMA channel request failed\n");
+	}
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!r) {
+		ret = -ENXIO;
+		goto release_channel;
+	}
+
+	config.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+	config.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+	config.src_addr = r->start + NDDB;
+	config.dst_addr = r->start + NDDB;
+	config.src_maxburst = 32;
+	config.dst_maxburst = 32;
+	ret = dmaengine_slave_config(nfc->dma_chan, &config);
+	if (ret < 0) {
+		dev_err(nfc->dev, "Failed to configure DMA channel\n");
+		goto release_channel;
+	}
+
+	/*
+	 * DMA must act on length multiple of 32 and this length may be
+	 * bigger than the destination buffer. Use this buffer instead
+	 * for DMA transfers and then copy the desired amount of data to
+	 * the provided buffer.
+	 */
+	nfc->dma_buf = kmalloc(MAX_CHUNK_SIZE, GFP_KERNEL | GFP_DMA);
+	if (!nfc->dma_buf) {
+		ret = -ENOMEM;
+		goto release_channel;
+	}
+
+	nfc->use_dma = true;
+
+	return 0;
+
+release_channel:
+	dma_release_channel(nfc->dma_chan);
+	nfc->dma_chan = NULL;
+
+	return ret;
+}
+
+static void marvell_nfc_reset(struct marvell_nfc *nfc)
+{
+	/*
+	 * ECC operations and interruptions are only enabled when specifically
+	 * needed. ECC shall not be activated in the early stages (fails probe).
+	 * Arbiter flag, even if marked as "reserved", must be set (empirical).
+	 * SPARE_EN bit must always be set or ECC bytes will not be at the same
+	 * offset in the read page and this will fail the protection.
+	 */
+	writel_relaxed(NDCR_ALL_INT | NDCR_ND_ARB_EN | NDCR_SPARE_EN |
+		       NDCR_RD_ID_CNT(NFCV1_READID_LEN), nfc->regs + NDCR);
+	writel_relaxed(0xFFFFFFFF, nfc->regs + NDSR);
+	writel_relaxed(0, nfc->regs + NDECCCTRL);
+}
+
+static int marvell_nfc_init(struct marvell_nfc *nfc)
+{
+	struct device_node *np = nfc->dev->of_node;
+
+	/*
+	 * Some SoCs like A7k/A8k need to enable manually the NAND
+	 * controller, gated clocks and reset bits to avoid being bootloader
+	 * dependent. This is done through the use of the System Functions
+	 * registers.
+	 */
+	if (nfc->caps->need_system_controller) {
+		struct regmap *sysctrl_base =
+			syscon_regmap_lookup_by_phandle(np,
+							"marvell,system-controller");
+
+		if (IS_ERR(sysctrl_base))
+			return PTR_ERR(sysctrl_base);
+
+		regmap_write(sysctrl_base, GENCONF_SOC_DEVICE_MUX,
+			     GENCONF_SOC_DEVICE_MUX_NFC_EN |
+			     GENCONF_SOC_DEVICE_MUX_ECC_CLK_RST |
+			     GENCONF_SOC_DEVICE_MUX_ECC_CORE_RST |
+			     GENCONF_SOC_DEVICE_MUX_NFC_INT_EN);
+
+		regmap_update_bits(sysctrl_base, GENCONF_CLK_GATING_CTRL,
+				   GENCONF_CLK_GATING_CTRL_ND_GATE,
+				   GENCONF_CLK_GATING_CTRL_ND_GATE);
+	}
+
+	/* Configure the DMA if appropriate */
+	if (!nfc->caps->is_nfcv2)
+		marvell_nfc_init_dma(nfc);
+
+	marvell_nfc_reset(nfc);
+
+	return 0;
+}
+
+static int marvell_nfc_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct marvell_nfc *nfc;
+	int ret;
+	int irq;
+
+	nfc = devm_kzalloc(&pdev->dev, sizeof(struct marvell_nfc),
+			   GFP_KERNEL);
+	if (!nfc)
+		return -ENOMEM;
+
+	nfc->dev = dev;
+	nand_controller_init(&nfc->controller);
+	nfc->controller.ops = &marvell_nand_controller_ops;
+	INIT_LIST_HEAD(&nfc->chips);
+
+	nfc->regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(nfc->regs))
+		return PTR_ERR(nfc->regs);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	nfc->core_clk = devm_clk_get(&pdev->dev, "core");
+
+	/* Managed the legacy case (when the first clock was not named) */
+	if (nfc->core_clk == ERR_PTR(-ENOENT))
+		nfc->core_clk = devm_clk_get(&pdev->dev, NULL);
+
+	if (IS_ERR(nfc->core_clk))
+		return PTR_ERR(nfc->core_clk);
+
+	ret = clk_prepare_enable(nfc->core_clk);
+	if (ret)
+		return ret;
+
+	nfc->reg_clk = devm_clk_get(&pdev->dev, "reg");
+	if (IS_ERR(nfc->reg_clk)) {
+		if (PTR_ERR(nfc->reg_clk) != -ENOENT) {
+			ret = PTR_ERR(nfc->reg_clk);
+			goto unprepare_core_clk;
+		}
+
+		nfc->reg_clk = NULL;
+	}
+
+	ret = clk_prepare_enable(nfc->reg_clk);
+	if (ret)
+		goto unprepare_core_clk;
+
+	marvell_nfc_disable_int(nfc, NDCR_ALL_INT);
+	marvell_nfc_clear_int(nfc, NDCR_ALL_INT);
+	ret = devm_request_irq(dev, irq, marvell_nfc_isr,
+			       0, "marvell-nfc", nfc);
+	if (ret)
+		goto unprepare_reg_clk;
+
+	/* Get NAND controller capabilities */
+	if (pdev->id_entry)
+		nfc->caps = (void *)pdev->id_entry->driver_data;
+	else
+		nfc->caps = of_device_get_match_data(&pdev->dev);
+
+	if (!nfc->caps) {
+		dev_err(dev, "Could not retrieve NFC caps\n");
+		ret = -EINVAL;
+		goto unprepare_reg_clk;
+	}
+
+	/* Init the controller and then probe the chips */
+	ret = marvell_nfc_init(nfc);
+	if (ret)
+		goto unprepare_reg_clk;
+
+	platform_set_drvdata(pdev, nfc);
+
+	ret = marvell_nand_chips_init(dev, nfc);
+	if (ret)
+		goto release_dma;
+
+	return 0;
+
+release_dma:
+	if (nfc->use_dma)
+		dma_release_channel(nfc->dma_chan);
+unprepare_reg_clk:
+	clk_disable_unprepare(nfc->reg_clk);
+unprepare_core_clk:
+	clk_disable_unprepare(nfc->core_clk);
+
+	return ret;
+}
+
+static int marvell_nfc_remove(struct platform_device *pdev)
+{
+	struct marvell_nfc *nfc = platform_get_drvdata(pdev);
+
+	marvell_nand_chips_cleanup(nfc);
+
+	if (nfc->use_dma) {
+		dmaengine_terminate_all(nfc->dma_chan);
+		dma_release_channel(nfc->dma_chan);
+	}
+
+	clk_disable_unprepare(nfc->reg_clk);
+	clk_disable_unprepare(nfc->core_clk);
+
+	return 0;
+}
+
+static int __maybe_unused marvell_nfc_suspend(struct device *dev)
+{
+	struct marvell_nfc *nfc = dev_get_drvdata(dev);
+	struct marvell_nand_chip *chip;
+
+	list_for_each_entry(chip, &nfc->chips, node)
+		marvell_nfc_wait_ndrun(&chip->chip);
+
+	clk_disable_unprepare(nfc->reg_clk);
+	clk_disable_unprepare(nfc->core_clk);
+
+	return 0;
+}
+
+static int __maybe_unused marvell_nfc_resume(struct device *dev)
+{
+	struct marvell_nfc *nfc = dev_get_drvdata(dev);
+	int ret;
+
+	ret = clk_prepare_enable(nfc->core_clk);
+	if (ret < 0)
+		return ret;
+
+	ret = clk_prepare_enable(nfc->reg_clk);
+	if (ret < 0) {
+		clk_disable_unprepare(nfc->core_clk);
+		return ret;
+	}
+
+	/*
+	 * Reset nfc->selected_chip so the next command will cause the timing
+	 * registers to be restored in marvell_nfc_select_target().
+	 */
+	nfc->selected_chip = NULL;
+
+	/* Reset registers that have lost their contents */
+	marvell_nfc_reset(nfc);
+
+	return 0;
+}
+
+static const struct dev_pm_ops marvell_nfc_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(marvell_nfc_suspend, marvell_nfc_resume)
+};
+
+static const struct marvell_nfc_caps marvell_armada_8k_nfc_caps = {
+	.max_cs_nb = 4,
+	.max_rb_nb = 2,
+	.need_system_controller = true,
+	.is_nfcv2 = true,
+};
+
+static const struct marvell_nfc_caps marvell_armada370_nfc_caps = {
+	.max_cs_nb = 4,
+	.max_rb_nb = 2,
+	.is_nfcv2 = true,
+};
+
+static const struct marvell_nfc_caps marvell_pxa3xx_nfc_caps = {
+	.max_cs_nb = 2,
+	.max_rb_nb = 1,
+	.use_dma = true,
+};
+
+static const struct marvell_nfc_caps marvell_armada_8k_nfc_legacy_caps = {
+	.max_cs_nb = 4,
+	.max_rb_nb = 2,
+	.need_system_controller = true,
+	.legacy_of_bindings = true,
+	.is_nfcv2 = true,
+};
+
+static const struct marvell_nfc_caps marvell_armada370_nfc_legacy_caps = {
+	.max_cs_nb = 4,
+	.max_rb_nb = 2,
+	.legacy_of_bindings = true,
+	.is_nfcv2 = true,
+};
+
+static const struct marvell_nfc_caps marvell_pxa3xx_nfc_legacy_caps = {
+	.max_cs_nb = 2,
+	.max_rb_nb = 1,
+	.legacy_of_bindings = true,
+	.use_dma = true,
+};
+
+static const struct platform_device_id marvell_nfc_platform_ids[] = {
+	{
+		.name = "pxa3xx-nand",
+		.driver_data = (kernel_ulong_t)&marvell_pxa3xx_nfc_legacy_caps,
+	},
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(platform, marvell_nfc_platform_ids);
+
+static const struct of_device_id marvell_nfc_of_ids[] = {
+	{
+		.compatible = "marvell,armada-8k-nand-controller",
+		.data = &marvell_armada_8k_nfc_caps,
+	},
+	{
+		.compatible = "marvell,armada370-nand-controller",
+		.data = &marvell_armada370_nfc_caps,
+	},
+	{
+		.compatible = "marvell,pxa3xx-nand-controller",
+		.data = &marvell_pxa3xx_nfc_caps,
+	},
+	/* Support for old/deprecated bindings: */
+	{
+		.compatible = "marvell,armada-8k-nand",
+		.data = &marvell_armada_8k_nfc_legacy_caps,
+	},
+	{
+		.compatible = "marvell,armada370-nand",
+		.data = &marvell_armada370_nfc_legacy_caps,
+	},
+	{
+		.compatible = "marvell,pxa3xx-nand",
+		.data = &marvell_pxa3xx_nfc_legacy_caps,
+	},
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, marvell_nfc_of_ids);
+
+static struct platform_driver marvell_nfc_driver = {
+	.driver	= {
+		.name		= "marvell-nfc",
+		.of_match_table = marvell_nfc_of_ids,
+		.pm		= &marvell_nfc_pm_ops,
+	},
+	.id_table = marvell_nfc_platform_ids,
+	.probe = marvell_nfc_probe,
+	.remove	= marvell_nfc_remove,
+};
+module_platform_driver(marvell_nfc_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Marvell NAND controller driver");