Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 967 insertions, 0 deletions

diff --git a/drivers/mtd/nand/raw/vf610_nfc.c b/drivers/mtd/nand/raw/vf610_nfc.c
new file mode 100644
index 000000000..40d70f991
--- /dev/null
+++ b/drivers/mtd/nand/raw/vf610_nfc.c
@@ -0,0 +1,967 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2009-2015 Freescale Semiconductor, Inc. and others
+ *
+ * Description: MPC5125, VF610, MCF54418 and Kinetis K70 Nand driver.
+ * Jason ported to M54418TWR and MVFA5 (VF610).
+ * Authors: Stefan Agner <stefan.agner@toradex.com>
+ *          Bill Pringlemeir <bpringlemeir@nbsps.com>
+ *          Shaohui Xie <b21989@freescale.com>
+ *          Jason Jin <Jason.jin@freescale.com>
+ *
+ * Based on original driver mpc5121_nfc.c.
+ *
+ * Limitations:
+ * - Untested on MPC5125 and M54418.
+ * - DMA and pipelining not used.
+ * - 2K pages or less.
+ * - HW ECC: Only 2K page with 64+ OOB.
+ * - HW ECC: Only 24 and 32-bit error correction implemented.
+ */
+
+#include <linux/module.h>
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/rawnand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/swab.h>
+
+#define	DRV_NAME		"vf610_nfc"
+
+/* Register Offsets */
+#define NFC_FLASH_CMD1			0x3F00
+#define NFC_FLASH_CMD2			0x3F04
+#define NFC_COL_ADDR			0x3F08
+#define NFC_ROW_ADDR			0x3F0c
+#define NFC_ROW_ADDR_INC		0x3F14
+#define NFC_FLASH_STATUS1		0x3F18
+#define NFC_FLASH_STATUS2		0x3F1c
+#define NFC_CACHE_SWAP			0x3F28
+#define NFC_SECTOR_SIZE			0x3F2c
+#define NFC_FLASH_CONFIG		0x3F30
+#define NFC_IRQ_STATUS			0x3F38
+
+/* Addresses for NFC MAIN RAM BUFFER areas */
+#define NFC_MAIN_AREA(n)		((n) *  0x1000)
+
+#define PAGE_2K				0x0800
+#define OOB_64				0x0040
+#define OOB_MAX				0x0100
+
+/* NFC_CMD2[CODE] controller cycle bit masks */
+#define COMMAND_CMD_BYTE1		BIT(14)
+#define COMMAND_CAR_BYTE1		BIT(13)
+#define COMMAND_CAR_BYTE2		BIT(12)
+#define COMMAND_RAR_BYTE1		BIT(11)
+#define COMMAND_RAR_BYTE2		BIT(10)
+#define COMMAND_RAR_BYTE3		BIT(9)
+#define COMMAND_NADDR_BYTES(x)		GENMASK(13, 13 - (x) + 1)
+#define COMMAND_WRITE_DATA		BIT(8)
+#define COMMAND_CMD_BYTE2		BIT(7)
+#define COMMAND_RB_HANDSHAKE		BIT(6)
+#define COMMAND_READ_DATA		BIT(5)
+#define COMMAND_CMD_BYTE3		BIT(4)
+#define COMMAND_READ_STATUS		BIT(3)
+#define COMMAND_READ_ID			BIT(2)
+
+/* NFC ECC mode define */
+#define ECC_BYPASS			0
+#define ECC_45_BYTE			6
+#define ECC_60_BYTE			7
+
+/*** Register Mask and bit definitions */
+
+/* NFC_FLASH_CMD1 Field */
+#define CMD_BYTE2_MASK				0xFF000000
+#define CMD_BYTE2_SHIFT				24
+
+/* NFC_FLASH_CM2 Field */
+#define CMD_BYTE1_MASK				0xFF000000
+#define CMD_BYTE1_SHIFT				24
+#define CMD_CODE_MASK				0x00FFFF00
+#define CMD_CODE_SHIFT				8
+#define BUFNO_MASK				0x00000006
+#define BUFNO_SHIFT				1
+#define START_BIT				BIT(0)
+
+/* NFC_COL_ADDR Field */
+#define COL_ADDR_MASK				0x0000FFFF
+#define COL_ADDR_SHIFT				0
+#define COL_ADDR(pos, val)			(((val) & 0xFF) << (8 * (pos)))
+
+/* NFC_ROW_ADDR Field */
+#define ROW_ADDR_MASK				0x00FFFFFF
+#define ROW_ADDR_SHIFT				0
+#define ROW_ADDR(pos, val)			(((val) & 0xFF) << (8 * (pos)))
+
+#define ROW_ADDR_CHIP_SEL_RB_MASK		0xF0000000
+#define ROW_ADDR_CHIP_SEL_RB_SHIFT		28
+#define ROW_ADDR_CHIP_SEL_MASK			0x0F000000
+#define ROW_ADDR_CHIP_SEL_SHIFT			24
+
+/* NFC_FLASH_STATUS2 Field */
+#define STATUS_BYTE1_MASK			0x000000FF
+
+/* NFC_FLASH_CONFIG Field */
+#define CONFIG_ECC_SRAM_ADDR_MASK		0x7FC00000
+#define CONFIG_ECC_SRAM_ADDR_SHIFT		22
+#define CONFIG_ECC_SRAM_REQ_BIT			BIT(21)
+#define CONFIG_DMA_REQ_BIT			BIT(20)
+#define CONFIG_ECC_MODE_MASK			0x000E0000
+#define CONFIG_ECC_MODE_SHIFT			17
+#define CONFIG_FAST_FLASH_BIT			BIT(16)
+#define CONFIG_16BIT				BIT(7)
+#define CONFIG_BOOT_MODE_BIT			BIT(6)
+#define CONFIG_ADDR_AUTO_INCR_BIT		BIT(5)
+#define CONFIG_BUFNO_AUTO_INCR_BIT		BIT(4)
+#define CONFIG_PAGE_CNT_MASK			0xF
+#define CONFIG_PAGE_CNT_SHIFT			0
+
+/* NFC_IRQ_STATUS Field */
+#define IDLE_IRQ_BIT				BIT(29)
+#define IDLE_EN_BIT				BIT(20)
+#define CMD_DONE_CLEAR_BIT			BIT(18)
+#define IDLE_CLEAR_BIT				BIT(17)
+
+/*
+ * ECC status - seems to consume 8 bytes (double word). The documented
+ * status byte is located in the lowest byte of the second word (which is
+ * the 4th or 7th byte depending on endianness).
+ * Calculate an offset to store the ECC status at the end of the buffer.
+ */
+#define ECC_SRAM_ADDR		(PAGE_2K + OOB_MAX - 8)
+
+#define ECC_STATUS		0x4
+#define ECC_STATUS_MASK		0x80
+#define ECC_STATUS_ERR_COUNT	0x3F
+
+enum vf610_nfc_variant {
+	NFC_VFC610 = 1,
+};
+
+struct vf610_nfc {
+	struct nand_controller base;
+	struct nand_chip chip;
+	struct device *dev;
+	void __iomem *regs;
+	struct completion cmd_done;
+	/* Status and ID are in alternate locations. */
+	enum vf610_nfc_variant variant;
+	struct clk *clk;
+	/*
+	 * Indicate that user data is accessed (full page/oob). This is
+	 * useful to indicate the driver whether to swap byte endianness.
+	 * See comments in vf610_nfc_rd_from_sram/vf610_nfc_wr_to_sram.
+	 */
+	bool data_access;
+	u32 ecc_mode;
+};
+
+static inline struct vf610_nfc *chip_to_nfc(struct nand_chip *chip)
+{
+	return container_of(chip, struct vf610_nfc, chip);
+}
+
+static inline u32 vf610_nfc_read(struct vf610_nfc *nfc, uint reg)
+{
+	return readl(nfc->regs + reg);
+}
+
+static inline void vf610_nfc_write(struct vf610_nfc *nfc, uint reg, u32 val)
+{
+	writel(val, nfc->regs + reg);
+}
+
+static inline void vf610_nfc_set(struct vf610_nfc *nfc, uint reg, u32 bits)
+{
+	vf610_nfc_write(nfc, reg, vf610_nfc_read(nfc, reg) | bits);
+}
+
+static inline void vf610_nfc_clear(struct vf610_nfc *nfc, uint reg, u32 bits)
+{
+	vf610_nfc_write(nfc, reg, vf610_nfc_read(nfc, reg) & ~bits);
+}
+
+static inline void vf610_nfc_set_field(struct vf610_nfc *nfc, u32 reg,
+				       u32 mask, u32 shift, u32 val)
+{
+	vf610_nfc_write(nfc, reg,
+			(vf610_nfc_read(nfc, reg) & (~mask)) | val << shift);
+}
+
+static inline bool vf610_nfc_kernel_is_little_endian(void)
+{
+#ifdef __LITTLE_ENDIAN
+	return true;
+#else
+	return false;
+#endif
+}
+
+/**
+ * Read accessor for internal SRAM buffer
+ * @dst: destination address in regular memory
+ * @src: source address in SRAM buffer
+ * @len: bytes to copy
+ * @fix_endian: Fix endianness if required
+ *
+ * Use this accessor for the internal SRAM buffers. On the ARM
+ * Freescale Vybrid SoC it's known that the driver can treat
+ * the SRAM buffer as if it's memory. Other platform might need
+ * to treat the buffers differently.
+ *
+ * The controller stores bytes from the NAND chip internally in big
+ * endianness. On little endian platforms such as Vybrid this leads
+ * to reversed byte order.
+ * For performance reason (and earlier probably due to unawareness)
+ * the driver avoids correcting endianness where it has control over
+ * write and read side (e.g. page wise data access).
+ */
+static inline void vf610_nfc_rd_from_sram(void *dst, const void __iomem *src,
+					  size_t len, bool fix_endian)
+{
+	if (vf610_nfc_kernel_is_little_endian() && fix_endian) {
+		unsigned int i;
+
+		for (i = 0; i < len; i += 4) {
+			u32 val = swab32(__raw_readl(src + i));
+
+			memcpy(dst + i, &val, min(sizeof(val), len - i));
+		}
+	} else {
+		memcpy_fromio(dst, src, len);
+	}
+}
+
+/**
+ * Write accessor for internal SRAM buffer
+ * @dst: destination address in SRAM buffer
+ * @src: source address in regular memory
+ * @len: bytes to copy
+ * @fix_endian: Fix endianness if required
+ *
+ * Use this accessor for the internal SRAM buffers. On the ARM
+ * Freescale Vybrid SoC it's known that the driver can treat
+ * the SRAM buffer as if it's memory. Other platform might need
+ * to treat the buffers differently.
+ *
+ * The controller stores bytes from the NAND chip internally in big
+ * endianness. On little endian platforms such as Vybrid this leads
+ * to reversed byte order.
+ * For performance reason (and earlier probably due to unawareness)
+ * the driver avoids correcting endianness where it has control over
+ * write and read side (e.g. page wise data access).
+ */
+static inline void vf610_nfc_wr_to_sram(void __iomem *dst, const void *src,
+					size_t len, bool fix_endian)
+{
+	if (vf610_nfc_kernel_is_little_endian() && fix_endian) {
+		unsigned int i;
+
+		for (i = 0; i < len; i += 4) {
+			u32 val;
+
+			memcpy(&val, src + i, min(sizeof(val), len - i));
+			__raw_writel(swab32(val), dst + i);
+		}
+	} else {
+		memcpy_toio(dst, src, len);
+	}
+}
+
+/* Clear flags for upcoming command */
+static inline void vf610_nfc_clear_status(struct vf610_nfc *nfc)
+{
+	u32 tmp = vf610_nfc_read(nfc, NFC_IRQ_STATUS);
+
+	tmp |= CMD_DONE_CLEAR_BIT | IDLE_CLEAR_BIT;
+	vf610_nfc_write(nfc, NFC_IRQ_STATUS, tmp);
+}
+
+static void vf610_nfc_done(struct vf610_nfc *nfc)
+{
+	unsigned long timeout = msecs_to_jiffies(100);
+
+	/*
+	 * Barrier is needed after this write. This write need
+	 * to be done before reading the next register the first
+	 * time.
+	 * vf610_nfc_set implicates such a barrier by using writel
+	 * to write to the register.
+	 */
+	vf610_nfc_set(nfc, NFC_IRQ_STATUS, IDLE_EN_BIT);
+	vf610_nfc_set(nfc, NFC_FLASH_CMD2, START_BIT);
+
+	if (!wait_for_completion_timeout(&nfc->cmd_done, timeout))
+		dev_warn(nfc->dev, "Timeout while waiting for BUSY.\n");
+
+	vf610_nfc_clear_status(nfc);
+}
+
+static irqreturn_t vf610_nfc_irq(int irq, void *data)
+{
+	struct vf610_nfc *nfc = data;
+
+	vf610_nfc_clear(nfc, NFC_IRQ_STATUS, IDLE_EN_BIT);
+	complete(&nfc->cmd_done);
+
+	return IRQ_HANDLED;
+}
+
+static inline void vf610_nfc_ecc_mode(struct vf610_nfc *nfc, int ecc_mode)
+{
+	vf610_nfc_set_field(nfc, NFC_FLASH_CONFIG,
+			    CONFIG_ECC_MODE_MASK,
+			    CONFIG_ECC_MODE_SHIFT, ecc_mode);
+}
+
+static inline void vf610_nfc_run(struct vf610_nfc *nfc, u32 col, u32 row,
+				 u32 cmd1, u32 cmd2, u32 trfr_sz)
+{
+	vf610_nfc_set_field(nfc, NFC_COL_ADDR, COL_ADDR_MASK,
+			    COL_ADDR_SHIFT, col);
+
+	vf610_nfc_set_field(nfc, NFC_ROW_ADDR, ROW_ADDR_MASK,
+			    ROW_ADDR_SHIFT, row);
+
+	vf610_nfc_write(nfc, NFC_SECTOR_SIZE, trfr_sz);
+	vf610_nfc_write(nfc, NFC_FLASH_CMD1, cmd1);
+	vf610_nfc_write(nfc, NFC_FLASH_CMD2, cmd2);
+
+	dev_dbg(nfc->dev,
+		"col 0x%04x, row 0x%08x, cmd1 0x%08x, cmd2 0x%08x, len %d\n",
+		col, row, cmd1, cmd2, trfr_sz);
+
+	vf610_nfc_done(nfc);
+}
+
+static inline const struct nand_op_instr *
+vf610_get_next_instr(const struct nand_subop *subop, int *op_id)
+{
+	if (*op_id + 1 >= subop->ninstrs)
+		return NULL;
+
+	(*op_id)++;
+
+	return &subop->instrs[*op_id];
+}
+
+static int vf610_nfc_cmd(struct nand_chip *chip,
+			 const struct nand_subop *subop)
+{
+	const struct nand_op_instr *instr;
+	struct vf610_nfc *nfc = chip_to_nfc(chip);
+	int op_id = -1, trfr_sz = 0, offset = 0;
+	u32 col = 0, row = 0, cmd1 = 0, cmd2 = 0, code = 0;
+	bool force8bit = false;
+
+	/*
+	 * Some ops are optional, but the hardware requires the operations
+	 * to be in this exact order.
+	 * The op parser enforces the order and makes sure that there isn't
+	 * a read and write element in a single operation.
+	 */
+	instr = vf610_get_next_instr(subop, &op_id);
+	if (!instr)
+		return -EINVAL;
+
+	if (instr && instr->type == NAND_OP_CMD_INSTR) {
+		cmd2 |= instr->ctx.cmd.opcode << CMD_BYTE1_SHIFT;
+		code |= COMMAND_CMD_BYTE1;
+
+		instr = vf610_get_next_instr(subop, &op_id);
+	}
+
+	if (instr && instr->type == NAND_OP_ADDR_INSTR) {
+		int naddrs = nand_subop_get_num_addr_cyc(subop, op_id);
+		int i = nand_subop_get_addr_start_off(subop, op_id);
+
+		for (; i < naddrs; i++) {
+			u8 val = instr->ctx.addr.addrs[i];
+
+			if (i < 2)
+				col |= COL_ADDR(i, val);
+			else
+				row |= ROW_ADDR(i - 2, val);
+		}
+		code |= COMMAND_NADDR_BYTES(naddrs);
+
+		instr = vf610_get_next_instr(subop, &op_id);
+	}
+
+	if (instr && instr->type == NAND_OP_DATA_OUT_INSTR) {
+		trfr_sz = nand_subop_get_data_len(subop, op_id);
+		offset = nand_subop_get_data_start_off(subop, op_id);
+		force8bit = instr->ctx.data.force_8bit;
+
+		/*
+		 * Don't fix endianness on page access for historical reasons.
+		 * See comment in vf610_nfc_wr_to_sram
+		 */
+		vf610_nfc_wr_to_sram(nfc->regs + NFC_MAIN_AREA(0) + offset,
+				     instr->ctx.data.buf.out + offset,
+				     trfr_sz, !nfc->data_access);
+		code |= COMMAND_WRITE_DATA;
+
+		instr = vf610_get_next_instr(subop, &op_id);
+	}
+
+	if (instr && instr->type == NAND_OP_CMD_INSTR) {
+		cmd1 |= instr->ctx.cmd.opcode << CMD_BYTE2_SHIFT;
+		code |= COMMAND_CMD_BYTE2;
+
+		instr = vf610_get_next_instr(subop, &op_id);
+	}
+
+	if (instr && instr->type == NAND_OP_WAITRDY_INSTR) {
+		code |= COMMAND_RB_HANDSHAKE;
+
+		instr = vf610_get_next_instr(subop, &op_id);
+	}
+
+	if (instr && instr->type == NAND_OP_DATA_IN_INSTR) {
+		trfr_sz = nand_subop_get_data_len(subop, op_id);
+		offset = nand_subop_get_data_start_off(subop, op_id);
+		force8bit = instr->ctx.data.force_8bit;
+
+		code |= COMMAND_READ_DATA;
+	}
+
+	if (force8bit && (chip->options & NAND_BUSWIDTH_16))
+		vf610_nfc_clear(nfc, NFC_FLASH_CONFIG, CONFIG_16BIT);
+
+	cmd2 |= code << CMD_CODE_SHIFT;
+
+	vf610_nfc_run(nfc, col, row, cmd1, cmd2, trfr_sz);
+
+	if (instr && instr->type == NAND_OP_DATA_IN_INSTR) {
+		/*
+		 * Don't fix endianness on page access for historical reasons.
+		 * See comment in vf610_nfc_rd_from_sram
+		 */
+		vf610_nfc_rd_from_sram(instr->ctx.data.buf.in + offset,
+				       nfc->regs + NFC_MAIN_AREA(0) + offset,
+				       trfr_sz, !nfc->data_access);
+	}
+
+	if (force8bit && (chip->options & NAND_BUSWIDTH_16))
+		vf610_nfc_set(nfc, NFC_FLASH_CONFIG, CONFIG_16BIT);
+
+	return 0;
+}
+
+static const struct nand_op_parser vf610_nfc_op_parser = NAND_OP_PARSER(
+	NAND_OP_PARSER_PATTERN(vf610_nfc_cmd,
+		NAND_OP_PARSER_PAT_CMD_ELEM(true),
+		NAND_OP_PARSER_PAT_ADDR_ELEM(true, 5),
+		NAND_OP_PARSER_PAT_DATA_OUT_ELEM(true, PAGE_2K + OOB_MAX),
+		NAND_OP_PARSER_PAT_CMD_ELEM(true),
+		NAND_OP_PARSER_PAT_WAITRDY_ELEM(true)),
+	NAND_OP_PARSER_PATTERN(vf610_nfc_cmd,
+		NAND_OP_PARSER_PAT_CMD_ELEM(true),
+		NAND_OP_PARSER_PAT_ADDR_ELEM(true, 5),
+		NAND_OP_PARSER_PAT_CMD_ELEM(true),
+		NAND_OP_PARSER_PAT_WAITRDY_ELEM(true),
+		NAND_OP_PARSER_PAT_DATA_IN_ELEM(true, PAGE_2K + OOB_MAX)),
+	);
+
+/*
+ * This function supports Vybrid only (MPC5125 would have full RB and four CS)
+ */
+static void vf610_nfc_select_target(struct nand_chip *chip, unsigned int cs)
+{
+	struct vf610_nfc *nfc = chip_to_nfc(chip);
+	u32 tmp;
+
+	/* Vybrid only (MPC5125 would have full RB and four CS) */
+	if (nfc->variant != NFC_VFC610)
+		return;
+
+	tmp = vf610_nfc_read(nfc, NFC_ROW_ADDR);
+	tmp &= ~(ROW_ADDR_CHIP_SEL_RB_MASK | ROW_ADDR_CHIP_SEL_MASK);
+	tmp |= 1 << ROW_ADDR_CHIP_SEL_RB_SHIFT;
+	tmp |= BIT(cs) << ROW_ADDR_CHIP_SEL_SHIFT;
+
+	vf610_nfc_write(nfc, NFC_ROW_ADDR, tmp);
+}
+
+static int vf610_nfc_exec_op(struct nand_chip *chip,
+			     const struct nand_operation *op,
+			     bool check_only)
+{
+	if (!check_only)
+		vf610_nfc_select_target(chip, op->cs);
+
+	return nand_op_parser_exec_op(chip, &vf610_nfc_op_parser, op,
+				      check_only);
+}
+
+static inline int vf610_nfc_correct_data(struct nand_chip *chip, uint8_t *dat,
+					 uint8_t *oob, int page)
+{
+	struct vf610_nfc *nfc = chip_to_nfc(chip);
+	struct mtd_info *mtd = nand_to_mtd(chip);
+	u32 ecc_status_off = NFC_MAIN_AREA(0) + ECC_SRAM_ADDR + ECC_STATUS;
+	u8 ecc_status;
+	u8 ecc_count;
+	int flips_threshold = nfc->chip.ecc.strength / 2;
+
+	ecc_status = vf610_nfc_read(nfc, ecc_status_off) & 0xff;
+	ecc_count = ecc_status & ECC_STATUS_ERR_COUNT;
+
+	if (!(ecc_status & ECC_STATUS_MASK))
+		return ecc_count;
+
+	nfc->data_access = true;
+	nand_read_oob_op(&nfc->chip, page, 0, oob, mtd->oobsize);
+	nfc->data_access = false;
+
+	/*
+	 * On an erased page, bit count (including OOB) should be zero or
+	 * at least less then half of the ECC strength.
+	 */
+	return nand_check_erased_ecc_chunk(dat, nfc->chip.ecc.size, oob,
+					   mtd->oobsize, NULL, 0,
+					   flips_threshold);
+}
+
+static void vf610_nfc_fill_row(struct nand_chip *chip, int page, u32 *code,
+			       u32 *row)
+{
+	*row = ROW_ADDR(0, page & 0xff) | ROW_ADDR(1, page >> 8);
+	*code |= COMMAND_RAR_BYTE1 | COMMAND_RAR_BYTE2;
+
+	if (chip->options & NAND_ROW_ADDR_3) {
+		*row |= ROW_ADDR(2, page >> 16);
+		*code |= COMMAND_RAR_BYTE3;
+	}
+}
+
+static int vf610_nfc_read_page(struct nand_chip *chip, uint8_t *buf,
+			       int oob_required, int page)
+{
+	struct vf610_nfc *nfc = chip_to_nfc(chip);
+	struct mtd_info *mtd = nand_to_mtd(chip);
+	int trfr_sz = mtd->writesize + mtd->oobsize;
+	u32 row = 0, cmd1 = 0, cmd2 = 0, code = 0;
+	int stat;
+
+	vf610_nfc_select_target(chip, chip->cur_cs);
+
+	cmd2 |= NAND_CMD_READ0 << CMD_BYTE1_SHIFT;
+	code |= COMMAND_CMD_BYTE1 | COMMAND_CAR_BYTE1 | COMMAND_CAR_BYTE2;
+
+	vf610_nfc_fill_row(chip, page, &code, &row);
+
+	cmd1 |= NAND_CMD_READSTART << CMD_BYTE2_SHIFT;
+	code |= COMMAND_CMD_BYTE2 | COMMAND_RB_HANDSHAKE | COMMAND_READ_DATA;
+
+	cmd2 |= code << CMD_CODE_SHIFT;
+
+	vf610_nfc_ecc_mode(nfc, nfc->ecc_mode);
+	vf610_nfc_run(nfc, 0, row, cmd1, cmd2, trfr_sz);
+	vf610_nfc_ecc_mode(nfc, ECC_BYPASS);
+
+	/*
+	 * Don't fix endianness on page access for historical reasons.
+	 * See comment in vf610_nfc_rd_from_sram
+	 */
+	vf610_nfc_rd_from_sram(buf, nfc->regs + NFC_MAIN_AREA(0),
+			       mtd->writesize, false);
+	if (oob_required)
+		vf610_nfc_rd_from_sram(chip->oob_poi,
+				       nfc->regs + NFC_MAIN_AREA(0) +
+						   mtd->writesize,
+				       mtd->oobsize, false);
+
+	stat = vf610_nfc_correct_data(chip, buf, chip->oob_poi, page);
+
+	if (stat < 0) {
+		mtd->ecc_stats.failed++;
+		return 0;
+	} else {
+		mtd->ecc_stats.corrected += stat;
+		return stat;
+	}
+}
+
+static int vf610_nfc_write_page(struct nand_chip *chip, const uint8_t *buf,
+				int oob_required, int page)
+{
+	struct vf610_nfc *nfc = chip_to_nfc(chip);
+	struct mtd_info *mtd = nand_to_mtd(chip);
+	int trfr_sz = mtd->writesize + mtd->oobsize;
+	u32 row = 0, cmd1 = 0, cmd2 = 0, code = 0;
+	u8 status;
+	int ret;
+
+	vf610_nfc_select_target(chip, chip->cur_cs);
+
+	cmd2 |= NAND_CMD_SEQIN << CMD_BYTE1_SHIFT;
+	code |= COMMAND_CMD_BYTE1 | COMMAND_CAR_BYTE1 | COMMAND_CAR_BYTE2;
+
+	vf610_nfc_fill_row(chip, page, &code, &row);
+
+	cmd1 |= NAND_CMD_PAGEPROG << CMD_BYTE2_SHIFT;
+	code |= COMMAND_CMD_BYTE2 | COMMAND_WRITE_DATA;
+
+	/*
+	 * Don't fix endianness on page access for historical reasons.
+	 * See comment in vf610_nfc_wr_to_sram
+	 */
+	vf610_nfc_wr_to_sram(nfc->regs + NFC_MAIN_AREA(0), buf,
+			     mtd->writesize, false);
+
+	code |= COMMAND_RB_HANDSHAKE;
+	cmd2 |= code << CMD_CODE_SHIFT;
+
+	vf610_nfc_ecc_mode(nfc, nfc->ecc_mode);
+	vf610_nfc_run(nfc, 0, row, cmd1, cmd2, trfr_sz);
+	vf610_nfc_ecc_mode(nfc, ECC_BYPASS);
+
+	ret = nand_status_op(chip, &status);
+	if (ret)
+		return ret;
+
+	if (status & NAND_STATUS_FAIL)
+		return -EIO;
+
+	return 0;
+}
+
+static int vf610_nfc_read_page_raw(struct nand_chip *chip, u8 *buf,
+				   int oob_required, int page)
+{
+	struct vf610_nfc *nfc = chip_to_nfc(chip);
+	int ret;
+
+	nfc->data_access = true;
+	ret = nand_read_page_raw(chip, buf, oob_required, page);
+	nfc->data_access = false;
+
+	return ret;
+}
+
+static int vf610_nfc_write_page_raw(struct nand_chip *chip, const u8 *buf,
+				    int oob_required, int page)
+{
+	struct vf610_nfc *nfc = chip_to_nfc(chip);
+	struct mtd_info *mtd = nand_to_mtd(chip);
+	int ret;
+
+	nfc->data_access = true;
+	ret = nand_prog_page_begin_op(chip, page, 0, buf, mtd->writesize);
+	if (!ret && oob_required)
+		ret = nand_write_data_op(chip, chip->oob_poi, mtd->oobsize,
+					 false);
+	nfc->data_access = false;
+
+	if (ret)
+		return ret;
+
+	return nand_prog_page_end_op(chip);
+}
+
+static int vf610_nfc_read_oob(struct nand_chip *chip, int page)
+{
+	struct vf610_nfc *nfc = chip_to_nfc(chip);
+	int ret;
+
+	nfc->data_access = true;
+	ret = nand_read_oob_std(chip, page);
+	nfc->data_access = false;
+
+	return ret;
+}
+
+static int vf610_nfc_write_oob(struct nand_chip *chip, int page)
+{
+	struct mtd_info *mtd = nand_to_mtd(chip);
+	struct vf610_nfc *nfc = chip_to_nfc(chip);
+	int ret;
+
+	nfc->data_access = true;
+	ret = nand_prog_page_begin_op(chip, page, mtd->writesize,
+				      chip->oob_poi, mtd->oobsize);
+	nfc->data_access = false;
+
+	if (ret)
+		return ret;
+
+	return nand_prog_page_end_op(chip);
+}
+
+static const struct of_device_id vf610_nfc_dt_ids[] = {
+	{ .compatible = "fsl,vf610-nfc", .data = (void *)NFC_VFC610 },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, vf610_nfc_dt_ids);
+
+static void vf610_nfc_preinit_controller(struct vf610_nfc *nfc)
+{
+	vf610_nfc_clear(nfc, NFC_FLASH_CONFIG, CONFIG_16BIT);
+	vf610_nfc_clear(nfc, NFC_FLASH_CONFIG, CONFIG_ADDR_AUTO_INCR_BIT);
+	vf610_nfc_clear(nfc, NFC_FLASH_CONFIG, CONFIG_BUFNO_AUTO_INCR_BIT);
+	vf610_nfc_clear(nfc, NFC_FLASH_CONFIG, CONFIG_BOOT_MODE_BIT);
+	vf610_nfc_clear(nfc, NFC_FLASH_CONFIG, CONFIG_DMA_REQ_BIT);
+	vf610_nfc_set(nfc, NFC_FLASH_CONFIG, CONFIG_FAST_FLASH_BIT);
+	vf610_nfc_ecc_mode(nfc, ECC_BYPASS);
+
+	/* Disable virtual pages, only one elementary transfer unit */
+	vf610_nfc_set_field(nfc, NFC_FLASH_CONFIG, CONFIG_PAGE_CNT_MASK,
+			    CONFIG_PAGE_CNT_SHIFT, 1);
+}
+
+static void vf610_nfc_init_controller(struct vf610_nfc *nfc)
+{
+	if (nfc->chip.options & NAND_BUSWIDTH_16)
+		vf610_nfc_set(nfc, NFC_FLASH_CONFIG, CONFIG_16BIT);
+	else
+		vf610_nfc_clear(nfc, NFC_FLASH_CONFIG, CONFIG_16BIT);
+
+	if (nfc->chip.ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST) {
+		/* Set ECC status offset in SRAM */
+		vf610_nfc_set_field(nfc, NFC_FLASH_CONFIG,
+				    CONFIG_ECC_SRAM_ADDR_MASK,
+				    CONFIG_ECC_SRAM_ADDR_SHIFT,
+				    ECC_SRAM_ADDR >> 3);
+
+		/* Enable ECC status in SRAM */
+		vf610_nfc_set(nfc, NFC_FLASH_CONFIG, CONFIG_ECC_SRAM_REQ_BIT);
+	}
+}
+
+static int vf610_nfc_attach_chip(struct nand_chip *chip)
+{
+	struct mtd_info *mtd = nand_to_mtd(chip);
+	struct vf610_nfc *nfc = chip_to_nfc(chip);
+
+	vf610_nfc_init_controller(nfc);
+
+	/* Bad block options. */
+	if (chip->bbt_options & NAND_BBT_USE_FLASH)
+		chip->bbt_options |= NAND_BBT_NO_OOB;
+
+	/* Single buffer only, max 256 OOB minus ECC status */
+	if (mtd->writesize + mtd->oobsize > PAGE_2K + OOB_MAX - 8) {
+		dev_err(nfc->dev, "Unsupported flash page size\n");
+		return -ENXIO;
+	}
+
+	if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST)
+		return 0;
+
+	if (mtd->writesize != PAGE_2K && mtd->oobsize < 64) {
+		dev_err(nfc->dev, "Unsupported flash with hwecc\n");
+		return -ENXIO;
+	}
+
+	if (chip->ecc.size != mtd->writesize) {
+		dev_err(nfc->dev, "Step size needs to be page size\n");
+		return -ENXIO;
+	}
+
+	/* Only 64 byte ECC layouts known */
+	if (mtd->oobsize > 64)
+		mtd->oobsize = 64;
+
+	/* Use default large page ECC layout defined in NAND core */
+	mtd_set_ooblayout(mtd, nand_get_large_page_ooblayout());
+	if (chip->ecc.strength == 32) {
+		nfc->ecc_mode = ECC_60_BYTE;
+		chip->ecc.bytes = 60;
+	} else if (chip->ecc.strength == 24) {
+		nfc->ecc_mode = ECC_45_BYTE;
+		chip->ecc.bytes = 45;
+	} else {
+		dev_err(nfc->dev, "Unsupported ECC strength\n");
+		return -ENXIO;
+	}
+
+	chip->ecc.read_page = vf610_nfc_read_page;
+	chip->ecc.write_page = vf610_nfc_write_page;
+	chip->ecc.read_page_raw = vf610_nfc_read_page_raw;
+	chip->ecc.write_page_raw = vf610_nfc_write_page_raw;
+	chip->ecc.read_oob = vf610_nfc_read_oob;
+	chip->ecc.write_oob = vf610_nfc_write_oob;
+
+	chip->ecc.size = PAGE_2K;
+
+	return 0;
+}
+
+static const struct nand_controller_ops vf610_nfc_controller_ops = {
+	.attach_chip = vf610_nfc_attach_chip,
+	.exec_op = vf610_nfc_exec_op,
+
+};
+
+static int vf610_nfc_probe(struct platform_device *pdev)
+{
+	struct vf610_nfc *nfc;
+	struct resource *res;
+	struct mtd_info *mtd;
+	struct nand_chip *chip;
+	struct device_node *child;
+	const struct of_device_id *of_id;
+	int err;
+	int irq;
+
+	nfc = devm_kzalloc(&pdev->dev, sizeof(*nfc), GFP_KERNEL);
+	if (!nfc)
+		return -ENOMEM;
+
+	nfc->dev = &pdev->dev;
+	chip = &nfc->chip;
+	mtd = nand_to_mtd(chip);
+
+	mtd->owner = THIS_MODULE;
+	mtd->dev.parent = nfc->dev;
+	mtd->name = DRV_NAME;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq <= 0)
+		return -EINVAL;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	nfc->regs = devm_ioremap_resource(nfc->dev, res);
+	if (IS_ERR(nfc->regs))
+		return PTR_ERR(nfc->regs);
+
+	nfc->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(nfc->clk))
+		return PTR_ERR(nfc->clk);
+
+	err = clk_prepare_enable(nfc->clk);
+	if (err) {
+		dev_err(nfc->dev, "Unable to enable clock!\n");
+		return err;
+	}
+
+	of_id = of_match_device(vf610_nfc_dt_ids, &pdev->dev);
+	if (!of_id) {
+		err = -ENODEV;
+		goto err_disable_clk;
+	}
+
+	nfc->variant = (enum vf610_nfc_variant)of_id->data;
+
+	for_each_available_child_of_node(nfc->dev->of_node, child) {
+		if (of_device_is_compatible(child, "fsl,vf610-nfc-nandcs")) {
+
+			if (nand_get_flash_node(chip)) {
+				dev_err(nfc->dev,
+					"Only one NAND chip supported!\n");
+				err = -EINVAL;
+				of_node_put(child);
+				goto err_disable_clk;
+			}
+
+			nand_set_flash_node(chip, child);
+		}
+	}
+
+	if (!nand_get_flash_node(chip)) {
+		dev_err(nfc->dev, "NAND chip sub-node missing!\n");
+		err = -ENODEV;
+		goto err_disable_clk;
+	}
+
+	chip->options |= NAND_NO_SUBPAGE_WRITE;
+
+	init_completion(&nfc->cmd_done);
+
+	err = devm_request_irq(nfc->dev, irq, vf610_nfc_irq, 0, DRV_NAME, nfc);
+	if (err) {
+		dev_err(nfc->dev, "Error requesting IRQ!\n");
+		goto err_disable_clk;
+	}
+
+	vf610_nfc_preinit_controller(nfc);
+
+	nand_controller_init(&nfc->base);
+	nfc->base.ops = &vf610_nfc_controller_ops;
+	chip->controller = &nfc->base;
+
+	/* Scan the NAND chip */
+	err = nand_scan(chip, 1);
+	if (err)
+		goto err_disable_clk;
+
+	platform_set_drvdata(pdev, nfc);
+
+	/* Register device in MTD */
+	err = mtd_device_register(mtd, NULL, 0);
+	if (err)
+		goto err_cleanup_nand;
+	return 0;
+
+err_cleanup_nand:
+	nand_cleanup(chip);
+err_disable_clk:
+	clk_disable_unprepare(nfc->clk);
+	return err;
+}
+
+static int vf610_nfc_remove(struct platform_device *pdev)
+{
+	struct vf610_nfc *nfc = platform_get_drvdata(pdev);
+	struct nand_chip *chip = &nfc->chip;
+	int ret;
+
+	ret = mtd_device_unregister(nand_to_mtd(chip));
+	WARN_ON(ret);
+	nand_cleanup(chip);
+	clk_disable_unprepare(nfc->clk);
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int vf610_nfc_suspend(struct device *dev)
+{
+	struct vf610_nfc *nfc = dev_get_drvdata(dev);
+
+	clk_disable_unprepare(nfc->clk);
+	return 0;
+}
+
+static int vf610_nfc_resume(struct device *dev)
+{
+	struct vf610_nfc *nfc = dev_get_drvdata(dev);
+	int err;
+
+	err = clk_prepare_enable(nfc->clk);
+	if (err)
+		return err;
+
+	vf610_nfc_preinit_controller(nfc);
+	vf610_nfc_init_controller(nfc);
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(vf610_nfc_pm_ops, vf610_nfc_suspend, vf610_nfc_resume);
+
+static struct platform_driver vf610_nfc_driver = {
+	.driver		= {
+		.name	= DRV_NAME,
+		.of_match_table = vf610_nfc_dt_ids,
+		.pm	= &vf610_nfc_pm_ops,
+	},
+	.probe		= vf610_nfc_probe,
+	.remove		= vf610_nfc_remove,
+};
+
+module_platform_driver(vf610_nfc_driver);
+
+MODULE_AUTHOR("Stefan Agner <stefan.agner@toradex.com>");
+MODULE_DESCRIPTION("Freescale VF610/MPC5125 NFC MTD NAND driver");
+MODULE_LICENSE("GPL");