Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1546 insertions, 0 deletions

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h
new file mode 100644
index 000000000..bacc8552b
--- /dev/null
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h
@@ -0,0 +1,1546 @@
+/* bnx2x_sp.h: Qlogic Everest network driver.
+ *
+ * Copyright 2011-2013 Broadcom Corporation
+ * Copyright (c) 2014 QLogic Corporation
+ * All rights reserved
+ *
+ * Unless you and Qlogic execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2, available
+ * at http://www.gnu.org/licenses/gpl-2.0.html (the "GPL").
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Qlogic software provided under a
+ * license other than the GPL, without Qlogic's express prior written
+ * consent.
+ *
+ * Maintained by: Ariel Elior <ariel.elior@qlogic.com>
+ * Written by: Vladislav Zolotarov
+ *
+ */
+#ifndef BNX2X_SP_VERBS
+#define BNX2X_SP_VERBS
+
+struct bnx2x;
+struct eth_context;
+
+/* Bits representing general command's configuration */
+enum {
+	RAMROD_TX,
+	RAMROD_RX,
+	/* Wait until all pending commands complete */
+	RAMROD_COMP_WAIT,
+	/* Don't send a ramrod, only update a registry */
+	RAMROD_DRV_CLR_ONLY,
+	/* Configure HW according to the current object state */
+	RAMROD_RESTORE,
+	 /* Execute the next command now */
+	RAMROD_EXEC,
+	/* Don't add a new command and continue execution of postponed
+	 * commands. If not set a new command will be added to the
+	 * pending commands list.
+	 */
+	RAMROD_CONT,
+	/* If there is another pending ramrod, wait until it finishes and
+	 * re-try to submit this one. This flag can be set only in sleepable
+	 * context, and should not be set from the context that completes the
+	 * ramrods as deadlock will occur.
+	 */
+	RAMROD_RETRY,
+};
+
+typedef enum {
+	BNX2X_OBJ_TYPE_RX,
+	BNX2X_OBJ_TYPE_TX,
+	BNX2X_OBJ_TYPE_RX_TX,
+} bnx2x_obj_type;
+
+/* Public slow path states */
+enum {
+	BNX2X_FILTER_MAC_PENDING,
+	BNX2X_FILTER_VLAN_PENDING,
+	BNX2X_FILTER_VLAN_MAC_PENDING,
+	BNX2X_FILTER_RX_MODE_PENDING,
+	BNX2X_FILTER_RX_MODE_SCHED,
+	BNX2X_FILTER_ISCSI_ETH_START_SCHED,
+	BNX2X_FILTER_ISCSI_ETH_STOP_SCHED,
+	BNX2X_FILTER_FCOE_ETH_START_SCHED,
+	BNX2X_FILTER_FCOE_ETH_STOP_SCHED,
+	BNX2X_FILTER_MCAST_PENDING,
+	BNX2X_FILTER_MCAST_SCHED,
+	BNX2X_FILTER_RSS_CONF_PENDING,
+	BNX2X_AFEX_FCOE_Q_UPDATE_PENDING,
+	BNX2X_AFEX_PENDING_VIFSET_MCP_ACK
+};
+
+struct bnx2x_raw_obj {
+	u8		func_id;
+
+	/* Queue params */
+	u8		cl_id;
+	u32		cid;
+
+	/* Ramrod data buffer params */
+	void		*rdata;
+	dma_addr_t	rdata_mapping;
+
+	/* Ramrod state params */
+	int		state;   /* "ramrod is pending" state bit */
+	unsigned long	*pstate; /* pointer to state buffer */
+
+	bnx2x_obj_type	obj_type;
+
+	int (*wait_comp)(struct bnx2x *bp,
+			 struct bnx2x_raw_obj *o);
+
+	bool (*check_pending)(struct bnx2x_raw_obj *o);
+	void (*clear_pending)(struct bnx2x_raw_obj *o);
+	void (*set_pending)(struct bnx2x_raw_obj *o);
+};
+
+/************************* VLAN-MAC commands related parameters ***************/
+struct bnx2x_mac_ramrod_data {
+	u8 mac[ETH_ALEN];
+	u8 is_inner_mac;
+};
+
+struct bnx2x_vlan_ramrod_data {
+	u16 vlan;
+};
+
+struct bnx2x_vlan_mac_ramrod_data {
+	u8 mac[ETH_ALEN];
+	u8 is_inner_mac;
+	u16 vlan;
+};
+
+union bnx2x_classification_ramrod_data {
+	struct bnx2x_mac_ramrod_data mac;
+	struct bnx2x_vlan_ramrod_data vlan;
+	struct bnx2x_vlan_mac_ramrod_data vlan_mac;
+};
+
+/* VLAN_MAC commands */
+enum bnx2x_vlan_mac_cmd {
+	BNX2X_VLAN_MAC_ADD,
+	BNX2X_VLAN_MAC_DEL,
+	BNX2X_VLAN_MAC_MOVE,
+};
+
+struct bnx2x_vlan_mac_data {
+	/* Requested command: BNX2X_VLAN_MAC_XX */
+	enum bnx2x_vlan_mac_cmd cmd;
+	/* used to contain the data related vlan_mac_flags bits from
+	 * ramrod parameters.
+	 */
+	unsigned long vlan_mac_flags;
+
+	/* Needed for MOVE command */
+	struct bnx2x_vlan_mac_obj *target_obj;
+
+	union bnx2x_classification_ramrod_data u;
+};
+
+/*************************** Exe Queue obj ************************************/
+union bnx2x_exe_queue_cmd_data {
+	struct bnx2x_vlan_mac_data vlan_mac;
+
+	struct {
+		/* TODO */
+	} mcast;
+};
+
+struct bnx2x_exeq_elem {
+	struct list_head		link;
+
+	/* Length of this element in the exe_chunk. */
+	int				cmd_len;
+
+	union bnx2x_exe_queue_cmd_data	cmd_data;
+};
+
+union bnx2x_qable_obj;
+
+union bnx2x_exeq_comp_elem {
+	union event_ring_elem *elem;
+};
+
+struct bnx2x_exe_queue_obj;
+
+typedef int (*exe_q_validate)(struct bnx2x *bp,
+			      union bnx2x_qable_obj *o,
+			      struct bnx2x_exeq_elem *elem);
+
+typedef int (*exe_q_remove)(struct bnx2x *bp,
+			    union bnx2x_qable_obj *o,
+			    struct bnx2x_exeq_elem *elem);
+
+/* Return positive if entry was optimized, 0 - if not, negative
+ * in case of an error.
+ */
+typedef int (*exe_q_optimize)(struct bnx2x *bp,
+			      union bnx2x_qable_obj *o,
+			      struct bnx2x_exeq_elem *elem);
+typedef int (*exe_q_execute)(struct bnx2x *bp,
+			     union bnx2x_qable_obj *o,
+			     struct list_head *exe_chunk,
+			     unsigned long *ramrod_flags);
+typedef struct bnx2x_exeq_elem *
+			(*exe_q_get)(struct bnx2x_exe_queue_obj *o,
+				     struct bnx2x_exeq_elem *elem);
+
+struct bnx2x_exe_queue_obj {
+	/* Commands pending for an execution. */
+	struct list_head	exe_queue;
+
+	/* Commands pending for an completion. */
+	struct list_head	pending_comp;
+
+	spinlock_t		lock;
+
+	/* Maximum length of commands' list for one execution */
+	int			exe_chunk_len;
+
+	union bnx2x_qable_obj	*owner;
+
+	/****** Virtual functions ******/
+	/**
+	 * Called before commands execution for commands that are really
+	 * going to be executed (after 'optimize').
+	 *
+	 * Must run under exe_queue->lock
+	 */
+	exe_q_validate		validate;
+
+	/**
+	 * Called before removing pending commands, cleaning allocated
+	 * resources (e.g., credits from validate)
+	 */
+	 exe_q_remove		remove;
+
+	/**
+	 * This will try to cancel the current pending commands list
+	 * considering the new command.
+	 *
+	 * Returns the number of optimized commands or a negative error code
+	 *
+	 * Must run under exe_queue->lock
+	 */
+	exe_q_optimize		optimize;
+
+	/**
+	 * Run the next commands chunk (owner specific).
+	 */
+	exe_q_execute		execute;
+
+	/**
+	 * Return the exe_queue element containing the specific command
+	 * if any. Otherwise return NULL.
+	 */
+	exe_q_get		get;
+};
+/***************** Classification verbs: Set/Del MAC/VLAN/VLAN-MAC ************/
+/*
+ * Element in the VLAN_MAC registry list having all currently configured
+ * rules.
+ */
+struct bnx2x_vlan_mac_registry_elem {
+	struct list_head	link;
+
+	/* Used to store the cam offset used for the mac/vlan/vlan-mac.
+	 * Relevant for 57710 and 57711 only. VLANs and MACs share the
+	 * same CAM for these chips.
+	 */
+	int			cam_offset;
+
+	/* Needed for DEL and RESTORE flows */
+	unsigned long		vlan_mac_flags;
+
+	union bnx2x_classification_ramrod_data u;
+};
+
+/* Bits representing VLAN_MAC commands specific flags */
+enum {
+	BNX2X_UC_LIST_MAC,
+	BNX2X_ETH_MAC,
+	BNX2X_ISCSI_ETH_MAC,
+	BNX2X_NETQ_ETH_MAC,
+	BNX2X_VLAN,
+	BNX2X_DONT_CONSUME_CAM_CREDIT,
+	BNX2X_DONT_CONSUME_CAM_CREDIT_DEST,
+};
+/* When looking for matching filters, some flags are not interesting */
+#define BNX2X_VLAN_MAC_CMP_MASK	(1 << BNX2X_UC_LIST_MAC | \
+				 1 << BNX2X_ETH_MAC | \
+				 1 << BNX2X_ISCSI_ETH_MAC | \
+				 1 << BNX2X_NETQ_ETH_MAC | \
+				 1 << BNX2X_VLAN)
+#define BNX2X_VLAN_MAC_CMP_FLAGS(flags) \
+	((flags) & BNX2X_VLAN_MAC_CMP_MASK)
+
+struct bnx2x_vlan_mac_ramrod_params {
+	/* Object to run the command from */
+	struct bnx2x_vlan_mac_obj *vlan_mac_obj;
+
+	/* General command flags: COMP_WAIT, etc. */
+	unsigned long ramrod_flags;
+
+	/* Command specific configuration request */
+	struct bnx2x_vlan_mac_data user_req;
+};
+
+struct bnx2x_vlan_mac_obj {
+	struct bnx2x_raw_obj raw;
+
+	/* Bookkeeping list: will prevent the addition of already existing
+	 * entries.
+	 */
+	struct list_head		head;
+	/* Implement a simple reader/writer lock on the head list.
+	 * all these fields should only be accessed under the exe_queue lock
+	 */
+	u8		head_reader; /* Num. of readers accessing head list */
+	bool		head_exe_request; /* Pending execution request. */
+	unsigned long	saved_ramrod_flags; /* Ramrods of pending execution */
+
+	/* TODO: Add it's initialization in the init functions */
+	struct bnx2x_exe_queue_obj	exe_queue;
+
+	/* MACs credit pool */
+	struct bnx2x_credit_pool_obj	*macs_pool;
+
+	/* VLANs credit pool */
+	struct bnx2x_credit_pool_obj	*vlans_pool;
+
+	/* RAMROD command to be used */
+	int				ramrod_cmd;
+
+	/* copy first n elements onto preallocated buffer
+	 *
+	 * @param n number of elements to get
+	 * @param buf buffer preallocated by caller into which elements
+	 *            will be copied. Note elements are 4-byte aligned
+	 *            so buffer size must be able to accommodate the
+	 *            aligned elements.
+	 *
+	 * @return number of copied bytes
+	 */
+	int (*get_n_elements)(struct bnx2x *bp,
+			      struct bnx2x_vlan_mac_obj *o, int n, u8 *base,
+			      u8 stride, u8 size);
+
+	/**
+	 * Checks if ADD-ramrod with the given params may be performed.
+	 *
+	 * @return zero if the element may be added
+	 */
+
+	int (*check_add)(struct bnx2x *bp,
+			 struct bnx2x_vlan_mac_obj *o,
+			 union bnx2x_classification_ramrod_data *data);
+
+	/**
+	 * Checks if DEL-ramrod with the given params may be performed.
+	 *
+	 * @return true if the element may be deleted
+	 */
+	struct bnx2x_vlan_mac_registry_elem *
+		(*check_del)(struct bnx2x *bp,
+			     struct bnx2x_vlan_mac_obj *o,
+			     union bnx2x_classification_ramrod_data *data);
+
+	/**
+	 * Checks if DEL-ramrod with the given params may be performed.
+	 *
+	 * @return true if the element may be deleted
+	 */
+	bool (*check_move)(struct bnx2x *bp,
+			   struct bnx2x_vlan_mac_obj *src_o,
+			   struct bnx2x_vlan_mac_obj *dst_o,
+			   union bnx2x_classification_ramrod_data *data);
+
+	/**
+	 *  Update the relevant credit object(s) (consume/return
+	 *  correspondingly).
+	 */
+	bool (*get_credit)(struct bnx2x_vlan_mac_obj *o);
+	bool (*put_credit)(struct bnx2x_vlan_mac_obj *o);
+	bool (*get_cam_offset)(struct bnx2x_vlan_mac_obj *o, int *offset);
+	bool (*put_cam_offset)(struct bnx2x_vlan_mac_obj *o, int offset);
+
+	/**
+	 * Configures one rule in the ramrod data buffer.
+	 */
+	void (*set_one_rule)(struct bnx2x *bp,
+			     struct bnx2x_vlan_mac_obj *o,
+			     struct bnx2x_exeq_elem *elem, int rule_idx,
+			     int cam_offset);
+
+	/**
+	*  Delete all configured elements having the given
+	*  vlan_mac_flags specification. Assumes no pending for
+	*  execution commands. Will schedule all all currently
+	*  configured MACs/VLANs/VLAN-MACs matching the vlan_mac_flags
+	*  specification for deletion and will use the given
+	*  ramrod_flags for the last DEL operation.
+	 *
+	 * @param bp
+	 * @param o
+	 * @param ramrod_flags RAMROD_XX flags
+	 *
+	 * @return 0 if the last operation has completed successfully
+	 *         and there are no more elements left, positive value
+	 *         if there are pending for completion commands,
+	 *         negative value in case of failure.
+	 */
+	int (*delete_all)(struct bnx2x *bp,
+			  struct bnx2x_vlan_mac_obj *o,
+			  unsigned long *vlan_mac_flags,
+			  unsigned long *ramrod_flags);
+
+	/**
+	 * Reconfigures the next MAC/VLAN/VLAN-MAC element from the previously
+	 * configured elements list.
+	 *
+	 * @param bp
+	 * @param p Command parameters (RAMROD_COMP_WAIT bit in
+	 *          ramrod_flags is only taken into an account)
+	 * @param ppos a pointer to the cookie that should be given back in the
+	 *        next call to make function handle the next element. If
+	 *        *ppos is set to NULL it will restart the iterator.
+	 *        If returned *ppos == NULL this means that the last
+	 *        element has been handled.
+	 *
+	 * @return int
+	 */
+	int (*restore)(struct bnx2x *bp,
+		       struct bnx2x_vlan_mac_ramrod_params *p,
+		       struct bnx2x_vlan_mac_registry_elem **ppos);
+
+	/**
+	 * Should be called on a completion arrival.
+	 *
+	 * @param bp
+	 * @param o
+	 * @param cqe Completion element we are handling
+	 * @param ramrod_flags if RAMROD_CONT is set the next bulk of
+	 *		       pending commands will be executed.
+	 *		       RAMROD_DRV_CLR_ONLY and RAMROD_RESTORE
+	 *		       may also be set if needed.
+	 *
+	 * @return 0 if there are neither pending nor waiting for
+	 *         completion commands. Positive value if there are
+	 *         pending for execution or for completion commands.
+	 *         Negative value in case of an error (including an
+	 *         error in the cqe).
+	 */
+	int (*complete)(struct bnx2x *bp, struct bnx2x_vlan_mac_obj *o,
+			union event_ring_elem *cqe,
+			unsigned long *ramrod_flags);
+
+	/**
+	 * Wait for completion of all commands. Don't schedule new ones,
+	 * just wait. It assumes that the completion code will schedule
+	 * for new commands.
+	 */
+	int (*wait)(struct bnx2x *bp, struct bnx2x_vlan_mac_obj *o);
+};
+
+enum {
+	BNX2X_LLH_CAM_ISCSI_ETH_LINE = 0,
+	BNX2X_LLH_CAM_ETH_LINE,
+	BNX2X_LLH_CAM_MAX_PF_LINE = NIG_REG_LLH1_FUNC_MEM_SIZE / 2
+};
+
+/** RX_MODE verbs:DROP_ALL/ACCEPT_ALL/ACCEPT_ALL_MULTI/ACCEPT_ALL_VLAN/NORMAL */
+
+/* RX_MODE ramrod special flags: set in rx_mode_flags field in
+ * a bnx2x_rx_mode_ramrod_params.
+ */
+enum {
+	BNX2X_RX_MODE_FCOE_ETH,
+	BNX2X_RX_MODE_ISCSI_ETH,
+};
+
+enum {
+	BNX2X_ACCEPT_UNICAST,
+	BNX2X_ACCEPT_MULTICAST,
+	BNX2X_ACCEPT_ALL_UNICAST,
+	BNX2X_ACCEPT_ALL_MULTICAST,
+	BNX2X_ACCEPT_BROADCAST,
+	BNX2X_ACCEPT_UNMATCHED,
+	BNX2X_ACCEPT_ANY_VLAN
+};
+
+struct bnx2x_rx_mode_ramrod_params {
+	struct bnx2x_rx_mode_obj *rx_mode_obj;
+	unsigned long *pstate;
+	int state;
+	u8 cl_id;
+	u32 cid;
+	u8 func_id;
+	unsigned long ramrod_flags;
+	unsigned long rx_mode_flags;
+
+	/* rdata is either a pointer to eth_filter_rules_ramrod_data(e2) or to
+	 * a tstorm_eth_mac_filter_config (e1x).
+	 */
+	void *rdata;
+	dma_addr_t rdata_mapping;
+
+	/* Rx mode settings */
+	unsigned long rx_accept_flags;
+
+	/* internal switching settings */
+	unsigned long tx_accept_flags;
+};
+
+struct bnx2x_rx_mode_obj {
+	int (*config_rx_mode)(struct bnx2x *bp,
+			      struct bnx2x_rx_mode_ramrod_params *p);
+
+	int (*wait_comp)(struct bnx2x *bp,
+			 struct bnx2x_rx_mode_ramrod_params *p);
+};
+
+/********************** Set multicast group ***********************************/
+
+struct bnx2x_mcast_list_elem {
+	struct list_head link;
+	u8 *mac;
+};
+
+union bnx2x_mcast_config_data {
+	u8 *mac;
+	u8 bin; /* used in a RESTORE flow */
+};
+
+struct bnx2x_mcast_ramrod_params {
+	struct bnx2x_mcast_obj *mcast_obj;
+
+	/* Relevant options are RAMROD_COMP_WAIT and RAMROD_DRV_CLR_ONLY */
+	unsigned long ramrod_flags;
+
+	struct list_head mcast_list; /* list of struct bnx2x_mcast_list_elem */
+	/** TODO:
+	 *      - rename it to macs_num.
+	 *      - Add a new command type for handling pending commands
+	 *        (remove "zero semantics").
+	 *
+	 *  Length of mcast_list. If zero and ADD_CONT command - post
+	 *  pending commands.
+	 */
+	int mcast_list_len;
+};
+
+enum bnx2x_mcast_cmd {
+	BNX2X_MCAST_CMD_ADD,
+	BNX2X_MCAST_CMD_CONT,
+	BNX2X_MCAST_CMD_DEL,
+	BNX2X_MCAST_CMD_RESTORE,
+
+	/* Following this, multicast configuration should equal to approx
+	 * the set of MACs provided [i.e., remove all else].
+	 * The two sub-commands are used internally to decide whether a given
+	 * bin is to be added or removed
+	 */
+	BNX2X_MCAST_CMD_SET,
+	BNX2X_MCAST_CMD_SET_ADD,
+	BNX2X_MCAST_CMD_SET_DEL,
+};
+
+struct bnx2x_mcast_obj {
+	struct bnx2x_raw_obj raw;
+
+	union {
+		struct {
+		#define BNX2X_MCAST_BINS_NUM	256
+		#define BNX2X_MCAST_VEC_SZ	(BNX2X_MCAST_BINS_NUM / 64)
+			u64 vec[BNX2X_MCAST_VEC_SZ];
+
+			/** Number of BINs to clear. Should be updated
+			 *  immediately when a command arrives in order to
+			 *  properly create DEL commands.
+			 */
+			int num_bins_set;
+		} aprox_match;
+
+		struct {
+			struct list_head macs;
+			int num_macs_set;
+		} exact_match;
+	} registry;
+
+	/* Pending commands */
+	struct list_head pending_cmds_head;
+
+	/* A state that is set in raw.pstate, when there are pending commands */
+	int sched_state;
+
+	/* Maximal number of mcast MACs configured in one command */
+	int max_cmd_len;
+
+	/* Total number of currently pending MACs to configure: both
+	 * in the pending commands list and in the current command.
+	 */
+	int total_pending_num;
+
+	u8 engine_id;
+
+	/**
+	 * @param cmd command to execute (BNX2X_MCAST_CMD_X, see above)
+	 */
+	int (*config_mcast)(struct bnx2x *bp,
+			    struct bnx2x_mcast_ramrod_params *p,
+			    enum bnx2x_mcast_cmd cmd);
+
+	/**
+	 * Fills the ramrod data during the RESTORE flow.
+	 *
+	 * @param bp
+	 * @param o
+	 * @param start_idx Registry index to start from
+	 * @param rdata_idx Index in the ramrod data to start from
+	 *
+	 * @return -1 if we handled the whole registry or index of the last
+	 *         handled registry element.
+	 */
+	int (*hdl_restore)(struct bnx2x *bp, struct bnx2x_mcast_obj *o,
+			   int start_bin, int *rdata_idx);
+
+	int (*enqueue_cmd)(struct bnx2x *bp, struct bnx2x_mcast_obj *o,
+			   struct bnx2x_mcast_ramrod_params *p,
+			   enum bnx2x_mcast_cmd cmd);
+
+	void (*set_one_rule)(struct bnx2x *bp,
+			     struct bnx2x_mcast_obj *o, int idx,
+			     union bnx2x_mcast_config_data *cfg_data,
+			     enum bnx2x_mcast_cmd cmd);
+
+	/** Checks if there are more mcast MACs to be set or a previous
+	 *  command is still pending.
+	 */
+	bool (*check_pending)(struct bnx2x_mcast_obj *o);
+
+	/**
+	 * Set/Clear/Check SCHEDULED state of the object
+	 */
+	void (*set_sched)(struct bnx2x_mcast_obj *o);
+	void (*clear_sched)(struct bnx2x_mcast_obj *o);
+	bool (*check_sched)(struct bnx2x_mcast_obj *o);
+
+	/* Wait until all pending commands complete */
+	int (*wait_comp)(struct bnx2x *bp, struct bnx2x_mcast_obj *o);
+
+	/**
+	 * Handle the internal object counters needed for proper
+	 * commands handling. Checks that the provided parameters are
+	 * feasible.
+	 */
+	int (*validate)(struct bnx2x *bp,
+			struct bnx2x_mcast_ramrod_params *p,
+			enum bnx2x_mcast_cmd cmd);
+
+	/**
+	 * Restore the values of internal counters in case of a failure.
+	 */
+	void (*revert)(struct bnx2x *bp,
+		       struct bnx2x_mcast_ramrod_params *p,
+		       int old_num_bins,
+		       enum bnx2x_mcast_cmd cmd);
+
+	int (*get_registry_size)(struct bnx2x_mcast_obj *o);
+	void (*set_registry_size)(struct bnx2x_mcast_obj *o, int n);
+};
+
+/*************************** Credit handling **********************************/
+struct bnx2x_credit_pool_obj {
+
+	/* Current amount of credit in the pool */
+	atomic_t	credit;
+
+	/* Maximum allowed credit. put() will check against it. */
+	int		pool_sz;
+
+	/* Allocate a pool table statically.
+	 *
+	 * Currently the maximum allowed size is MAX_MAC_CREDIT_E2(272)
+	 *
+	 * The set bit in the table will mean that the entry is available.
+	 */
+#define BNX2X_POOL_VEC_SIZE	(MAX_MAC_CREDIT_E2 / 64)
+	u64		pool_mirror[BNX2X_POOL_VEC_SIZE];
+
+	/* Base pool offset (initialized differently */
+	int		base_pool_offset;
+
+	/**
+	 * Get the next free pool entry.
+	 *
+	 * @return true if there was a free entry in the pool
+	 */
+	bool (*get_entry)(struct bnx2x_credit_pool_obj *o, int *entry);
+
+	/**
+	 * Return the entry back to the pool.
+	 *
+	 * @return true if entry is legal and has been successfully
+	 *         returned to the pool.
+	 */
+	bool (*put_entry)(struct bnx2x_credit_pool_obj *o, int entry);
+
+	/**
+	 * Get the requested amount of credit from the pool.
+	 *
+	 * @param cnt Amount of requested credit
+	 * @return true if the operation is successful
+	 */
+	bool (*get)(struct bnx2x_credit_pool_obj *o, int cnt);
+
+	/**
+	 * Returns the credit to the pool.
+	 *
+	 * @param cnt Amount of credit to return
+	 * @return true if the operation is successful
+	 */
+	bool (*put)(struct bnx2x_credit_pool_obj *o, int cnt);
+
+	/**
+	 * Reads the current amount of credit.
+	 */
+	int (*check)(struct bnx2x_credit_pool_obj *o);
+};
+
+/*************************** RSS configuration ********************************/
+enum {
+	/* RSS_MODE bits are mutually exclusive */
+	BNX2X_RSS_MODE_DISABLED,
+	BNX2X_RSS_MODE_REGULAR,
+
+	BNX2X_RSS_SET_SRCH, /* Setup searcher, E1x specific flag */
+
+	BNX2X_RSS_IPV4,
+	BNX2X_RSS_IPV4_TCP,
+	BNX2X_RSS_IPV4_UDP,
+	BNX2X_RSS_IPV6,
+	BNX2X_RSS_IPV6_TCP,
+	BNX2X_RSS_IPV6_UDP,
+
+	BNX2X_RSS_IPV4_VXLAN,
+	BNX2X_RSS_IPV6_VXLAN,
+	BNX2X_RSS_TUNN_INNER_HDRS,
+};
+
+struct bnx2x_config_rss_params {
+	struct bnx2x_rss_config_obj *rss_obj;
+
+	/* may have RAMROD_COMP_WAIT set only */
+	unsigned long	ramrod_flags;
+
+	/* BNX2X_RSS_X bits */
+	unsigned long	rss_flags;
+
+	/* Number hash bits to take into an account */
+	u8		rss_result_mask;
+
+	/* Indirection table */
+	u8		ind_table[T_ETH_INDIRECTION_TABLE_SIZE];
+
+	/* RSS hash values */
+	u32		rss_key[10];
+
+	/* valid only iff BNX2X_RSS_UPDATE_TOE is set */
+	u16		toe_rss_bitmap;
+};
+
+struct bnx2x_rss_config_obj {
+	struct bnx2x_raw_obj	raw;
+
+	/* RSS engine to use */
+	u8			engine_id;
+
+	/* Last configured indirection table */
+	u8			ind_table[T_ETH_INDIRECTION_TABLE_SIZE];
+
+	/* flags for enabling 4-tupple hash on UDP */
+	u8			udp_rss_v4;
+	u8			udp_rss_v6;
+
+	int (*config_rss)(struct bnx2x *bp,
+			  struct bnx2x_config_rss_params *p);
+};
+
+/*********************** Queue state update ***********************************/
+
+/* UPDATE command options */
+enum {
+	BNX2X_Q_UPDATE_IN_VLAN_REM,
+	BNX2X_Q_UPDATE_IN_VLAN_REM_CHNG,
+	BNX2X_Q_UPDATE_OUT_VLAN_REM,
+	BNX2X_Q_UPDATE_OUT_VLAN_REM_CHNG,
+	BNX2X_Q_UPDATE_ANTI_SPOOF,
+	BNX2X_Q_UPDATE_ANTI_SPOOF_CHNG,
+	BNX2X_Q_UPDATE_ACTIVATE,
+	BNX2X_Q_UPDATE_ACTIVATE_CHNG,
+	BNX2X_Q_UPDATE_DEF_VLAN_EN,
+	BNX2X_Q_UPDATE_DEF_VLAN_EN_CHNG,
+	BNX2X_Q_UPDATE_SILENT_VLAN_REM_CHNG,
+	BNX2X_Q_UPDATE_SILENT_VLAN_REM,
+	BNX2X_Q_UPDATE_TX_SWITCHING_CHNG,
+	BNX2X_Q_UPDATE_TX_SWITCHING,
+	BNX2X_Q_UPDATE_PTP_PKTS_CHNG,
+	BNX2X_Q_UPDATE_PTP_PKTS,
+};
+
+/* Allowed Queue states */
+enum bnx2x_q_state {
+	BNX2X_Q_STATE_RESET,
+	BNX2X_Q_STATE_INITIALIZED,
+	BNX2X_Q_STATE_ACTIVE,
+	BNX2X_Q_STATE_MULTI_COS,
+	BNX2X_Q_STATE_MCOS_TERMINATED,
+	BNX2X_Q_STATE_INACTIVE,
+	BNX2X_Q_STATE_STOPPED,
+	BNX2X_Q_STATE_TERMINATED,
+	BNX2X_Q_STATE_FLRED,
+	BNX2X_Q_STATE_MAX,
+};
+
+/* Allowed Queue states */
+enum bnx2x_q_logical_state {
+	BNX2X_Q_LOGICAL_STATE_ACTIVE,
+	BNX2X_Q_LOGICAL_STATE_STOPPED,
+};
+
+/* Allowed commands */
+enum bnx2x_queue_cmd {
+	BNX2X_Q_CMD_INIT,
+	BNX2X_Q_CMD_SETUP,
+	BNX2X_Q_CMD_SETUP_TX_ONLY,
+	BNX2X_Q_CMD_DEACTIVATE,
+	BNX2X_Q_CMD_ACTIVATE,
+	BNX2X_Q_CMD_UPDATE,
+	BNX2X_Q_CMD_UPDATE_TPA,
+	BNX2X_Q_CMD_HALT,
+	BNX2X_Q_CMD_CFC_DEL,
+	BNX2X_Q_CMD_TERMINATE,
+	BNX2X_Q_CMD_EMPTY,
+	BNX2X_Q_CMD_MAX,
+};
+
+/* queue SETUP + INIT flags */
+enum {
+	BNX2X_Q_FLG_TPA,
+	BNX2X_Q_FLG_TPA_IPV6,
+	BNX2X_Q_FLG_TPA_GRO,
+	BNX2X_Q_FLG_STATS,
+	BNX2X_Q_FLG_ZERO_STATS,
+	BNX2X_Q_FLG_ACTIVE,
+	BNX2X_Q_FLG_OV,
+	BNX2X_Q_FLG_VLAN,
+	BNX2X_Q_FLG_COS,
+	BNX2X_Q_FLG_HC,
+	BNX2X_Q_FLG_HC_EN,
+	BNX2X_Q_FLG_DHC,
+	BNX2X_Q_FLG_FCOE,
+	BNX2X_Q_FLG_LEADING_RSS,
+	BNX2X_Q_FLG_MCAST,
+	BNX2X_Q_FLG_DEF_VLAN,
+	BNX2X_Q_FLG_TX_SWITCH,
+	BNX2X_Q_FLG_TX_SEC,
+	BNX2X_Q_FLG_ANTI_SPOOF,
+	BNX2X_Q_FLG_SILENT_VLAN_REM,
+	BNX2X_Q_FLG_FORCE_DEFAULT_PRI,
+	BNX2X_Q_FLG_REFUSE_OUTBAND_VLAN,
+	BNX2X_Q_FLG_PCSUM_ON_PKT,
+	BNX2X_Q_FLG_TUN_INC_INNER_IP_ID
+};
+
+/* Queue type options: queue type may be a combination of below. */
+enum bnx2x_q_type {
+	/** TODO: Consider moving both these flags into the init()
+	 *        ramrod params.
+	 */
+	BNX2X_Q_TYPE_HAS_RX,
+	BNX2X_Q_TYPE_HAS_TX,
+};
+
+#define BNX2X_PRIMARY_CID_INDEX			0
+#define BNX2X_MULTI_TX_COS_E1X			3 /* QM only */
+#define BNX2X_MULTI_TX_COS_E2_E3A0		2
+#define BNX2X_MULTI_TX_COS_E3B0			3
+#define BNX2X_MULTI_TX_COS			3 /* Maximum possible */
+
+#define MAC_PAD (ALIGN(ETH_ALEN, sizeof(u32)) - ETH_ALEN)
+/* DMAE channel to be used by FW for timesync workaroun. A driver that sends
+ * timesync-related ramrods must not use this DMAE command ID.
+ */
+#define FW_DMAE_CMD_ID 6
+
+struct bnx2x_queue_init_params {
+	struct {
+		unsigned long	flags;
+		u16		hc_rate;
+		u8		fw_sb_id;
+		u8		sb_cq_index;
+	} tx;
+
+	struct {
+		unsigned long	flags;
+		u16		hc_rate;
+		u8		fw_sb_id;
+		u8		sb_cq_index;
+	} rx;
+
+	/* CID context in the host memory */
+	struct eth_context *cxts[BNX2X_MULTI_TX_COS];
+
+	/* maximum number of cos supported by hardware */
+	u8 max_cos;
+};
+
+struct bnx2x_queue_terminate_params {
+	/* index within the tx_only cids of this queue object */
+	u8 cid_index;
+};
+
+struct bnx2x_queue_cfc_del_params {
+	/* index within the tx_only cids of this queue object */
+	u8 cid_index;
+};
+
+struct bnx2x_queue_update_params {
+	unsigned long	update_flags; /* BNX2X_Q_UPDATE_XX bits */
+	u16		def_vlan;
+	u16		silent_removal_value;
+	u16		silent_removal_mask;
+/* index within the tx_only cids of this queue object */
+	u8		cid_index;
+};
+
+struct bnx2x_queue_update_tpa_params {
+	dma_addr_t sge_map;
+	u8 update_ipv4;
+	u8 update_ipv6;
+	u8 max_tpa_queues;
+	u8 max_sges_pkt;
+	u8 complete_on_both_clients;
+	u8 dont_verify_thr;
+	u8 tpa_mode;
+	u8 _pad;
+
+	u16 sge_buff_sz;
+	u16 max_agg_sz;
+
+	u16 sge_pause_thr_low;
+	u16 sge_pause_thr_high;
+};
+
+struct rxq_pause_params {
+	u16		bd_th_lo;
+	u16		bd_th_hi;
+	u16		rcq_th_lo;
+	u16		rcq_th_hi;
+	u16		sge_th_lo; /* valid iff BNX2X_Q_FLG_TPA */
+	u16		sge_th_hi; /* valid iff BNX2X_Q_FLG_TPA */
+	u16		pri_map;
+};
+
+/* general */
+struct bnx2x_general_setup_params {
+	/* valid iff BNX2X_Q_FLG_STATS */
+	u8		stat_id;
+
+	u8		spcl_id;
+	u16		mtu;
+	u8		cos;
+
+	u8		fp_hsi;
+};
+
+struct bnx2x_rxq_setup_params {
+	/* dma */
+	dma_addr_t	dscr_map;
+	dma_addr_t	sge_map;
+	dma_addr_t	rcq_map;
+	dma_addr_t	rcq_np_map;
+
+	u16		drop_flags;
+	u16		buf_sz;
+	u8		fw_sb_id;
+	u8		cl_qzone_id;
+
+	/* valid iff BNX2X_Q_FLG_TPA */
+	u16		tpa_agg_sz;
+	u16		sge_buf_sz;
+	u8		max_sges_pkt;
+	u8		max_tpa_queues;
+	u8		rss_engine_id;
+
+	/* valid iff BNX2X_Q_FLG_MCAST */
+	u8		mcast_engine_id;
+
+	u8		cache_line_log;
+
+	u8		sb_cq_index;
+
+	/* valid iff BXN2X_Q_FLG_SILENT_VLAN_REM */
+	u16 silent_removal_value;
+	u16 silent_removal_mask;
+};
+
+struct bnx2x_txq_setup_params {
+	/* dma */
+	dma_addr_t	dscr_map;
+
+	u8		fw_sb_id;
+	u8		sb_cq_index;
+	u8		cos;		/* valid iff BNX2X_Q_FLG_COS */
+	u16		traffic_type;
+	/* equals to the leading rss client id, used for TX classification*/
+	u8		tss_leading_cl_id;
+
+	/* valid iff BNX2X_Q_FLG_DEF_VLAN */
+	u16		default_vlan;
+};
+
+struct bnx2x_queue_setup_params {
+	struct bnx2x_general_setup_params gen_params;
+	struct bnx2x_txq_setup_params txq_params;
+	struct bnx2x_rxq_setup_params rxq_params;
+	struct rxq_pause_params pause_params;
+	unsigned long flags;
+};
+
+struct bnx2x_queue_setup_tx_only_params {
+	struct bnx2x_general_setup_params	gen_params;
+	struct bnx2x_txq_setup_params		txq_params;
+	unsigned long				flags;
+	/* index within the tx_only cids of this queue object */
+	u8					cid_index;
+};
+
+struct bnx2x_queue_state_params {
+	struct bnx2x_queue_sp_obj *q_obj;
+
+	/* Current command */
+	enum bnx2x_queue_cmd cmd;
+
+	/* may have RAMROD_COMP_WAIT set only */
+	unsigned long ramrod_flags;
+
+	/* Params according to the current command */
+	union {
+		struct bnx2x_queue_update_params	update;
+		struct bnx2x_queue_update_tpa_params    update_tpa;
+		struct bnx2x_queue_setup_params		setup;
+		struct bnx2x_queue_init_params		init;
+		struct bnx2x_queue_setup_tx_only_params	tx_only;
+		struct bnx2x_queue_terminate_params	terminate;
+		struct bnx2x_queue_cfc_del_params	cfc_del;
+	} params;
+};
+
+struct bnx2x_viflist_params {
+	u8 echo_res;
+	u8 func_bit_map_res;
+};
+
+struct bnx2x_queue_sp_obj {
+	u32		cids[BNX2X_MULTI_TX_COS];
+	u8		cl_id;
+	u8		func_id;
+
+	/* number of traffic classes supported by queue.
+	 * The primary connection of the queue supports the first traffic
+	 * class. Any further traffic class is supported by a tx-only
+	 * connection.
+	 *
+	 * Therefore max_cos is also a number of valid entries in the cids
+	 * array.
+	 */
+	u8 max_cos;
+	u8 num_tx_only, next_tx_only;
+
+	enum bnx2x_q_state state, next_state;
+
+	/* bits from enum bnx2x_q_type */
+	unsigned long	type;
+
+	/* BNX2X_Q_CMD_XX bits. This object implements "one
+	 * pending" paradigm but for debug and tracing purposes it's
+	 * more convenient to have different bits for different
+	 * commands.
+	 */
+	unsigned long	pending;
+
+	/* Buffer to use as a ramrod data and its mapping */
+	void		*rdata;
+	dma_addr_t	rdata_mapping;
+
+	/**
+	 * Performs one state change according to the given parameters.
+	 *
+	 * @return 0 in case of success and negative value otherwise.
+	 */
+	int (*send_cmd)(struct bnx2x *bp,
+			struct bnx2x_queue_state_params *params);
+
+	/**
+	 * Sets the pending bit according to the requested transition.
+	 */
+	int (*set_pending)(struct bnx2x_queue_sp_obj *o,
+			   struct bnx2x_queue_state_params *params);
+
+	/**
+	 * Checks that the requested state transition is legal.
+	 */
+	int (*check_transition)(struct bnx2x *bp,
+				struct bnx2x_queue_sp_obj *o,
+				struct bnx2x_queue_state_params *params);
+
+	/**
+	 * Completes the pending command.
+	 */
+	int (*complete_cmd)(struct bnx2x *bp,
+			    struct bnx2x_queue_sp_obj *o,
+			    enum bnx2x_queue_cmd);
+
+	int (*wait_comp)(struct bnx2x *bp,
+			 struct bnx2x_queue_sp_obj *o,
+			 enum bnx2x_queue_cmd cmd);
+};
+
+/********************** Function state update *********************************/
+
+/* UPDATE command options */
+enum {
+	BNX2X_F_UPDATE_TX_SWITCH_SUSPEND_CHNG,
+	BNX2X_F_UPDATE_TX_SWITCH_SUSPEND,
+	BNX2X_F_UPDATE_SD_VLAN_TAG_CHNG,
+	BNX2X_F_UPDATE_SD_VLAN_ETH_TYPE_CHNG,
+	BNX2X_F_UPDATE_VLAN_FORCE_PRIO_CHNG,
+	BNX2X_F_UPDATE_VLAN_FORCE_PRIO_FLAG,
+	BNX2X_F_UPDATE_TUNNEL_CFG_CHNG,
+	BNX2X_F_UPDATE_TUNNEL_INNER_CLSS_L2GRE,
+	BNX2X_F_UPDATE_TUNNEL_INNER_CLSS_VXLAN,
+	BNX2X_F_UPDATE_TUNNEL_INNER_CLSS_L2GENEVE,
+	BNX2X_F_UPDATE_TUNNEL_INNER_RSS,
+};
+
+/* Allowed Function states */
+enum bnx2x_func_state {
+	BNX2X_F_STATE_RESET,
+	BNX2X_F_STATE_INITIALIZED,
+	BNX2X_F_STATE_STARTED,
+	BNX2X_F_STATE_TX_STOPPED,
+	BNX2X_F_STATE_MAX,
+};
+
+/* Allowed Function commands */
+enum bnx2x_func_cmd {
+	BNX2X_F_CMD_HW_INIT,
+	BNX2X_F_CMD_START,
+	BNX2X_F_CMD_STOP,
+	BNX2X_F_CMD_HW_RESET,
+	BNX2X_F_CMD_AFEX_UPDATE,
+	BNX2X_F_CMD_AFEX_VIFLISTS,
+	BNX2X_F_CMD_TX_STOP,
+	BNX2X_F_CMD_TX_START,
+	BNX2X_F_CMD_SWITCH_UPDATE,
+	BNX2X_F_CMD_SET_TIMESYNC,
+	BNX2X_F_CMD_MAX,
+};
+
+struct bnx2x_func_hw_init_params {
+	/* A load phase returned by MCP.
+	 *
+	 * May be:
+	 *		FW_MSG_CODE_DRV_LOAD_COMMON_CHIP
+	 *		FW_MSG_CODE_DRV_LOAD_COMMON
+	 *		FW_MSG_CODE_DRV_LOAD_PORT
+	 *		FW_MSG_CODE_DRV_LOAD_FUNCTION
+	 */
+	u32 load_phase;
+};
+
+struct bnx2x_func_hw_reset_params {
+	/* A load phase returned by MCP.
+	 *
+	 * May be:
+	 *		FW_MSG_CODE_DRV_LOAD_COMMON_CHIP
+	 *		FW_MSG_CODE_DRV_LOAD_COMMON
+	 *		FW_MSG_CODE_DRV_LOAD_PORT
+	 *		FW_MSG_CODE_DRV_LOAD_FUNCTION
+	 */
+	u32 reset_phase;
+};
+
+struct bnx2x_func_start_params {
+	/* Multi Function mode:
+	 *	- Single Function
+	 *	- Switch Dependent
+	 *	- Switch Independent
+	 */
+	u16 mf_mode;
+
+	/* Switch Dependent mode outer VLAN tag */
+	u16 sd_vlan_tag;
+
+	/* Function cos mode */
+	u8 network_cos_mode;
+
+	/* UDP dest port for VXLAN */
+	u16 vxlan_dst_port;
+
+	/* UDP dest port for Geneve */
+	u16 geneve_dst_port;
+
+	/* Enable inner Rx classifications for L2GRE packets */
+	u8 inner_clss_l2gre;
+
+	/* Enable inner Rx classifications for L2-Geneve packets */
+	u8 inner_clss_l2geneve;
+
+	/* Enable inner Rx classification for vxlan packets */
+	u8 inner_clss_vxlan;
+
+	/* Enable RSS according to inner header */
+	u8 inner_rss;
+
+	/* Allows accepting of packets failing MF classification, possibly
+	 * only matching a given ethertype
+	 */
+	u8 class_fail;
+	u16 class_fail_ethtype;
+
+	/* Override priority of output packets */
+	u8 sd_vlan_force_pri;
+	u8 sd_vlan_force_pri_val;
+
+	/* Replace vlan's ethertype */
+	u16 sd_vlan_eth_type;
+
+	/* Prevent inner vlans from being added by FW */
+	u8 no_added_tags;
+
+	/* Inner-to-Outer vlan priority mapping */
+	u8 c2s_pri[MAX_VLAN_PRIORITIES];
+	u8 c2s_pri_default;
+	u8 c2s_pri_valid;
+};
+
+struct bnx2x_func_switch_update_params {
+	unsigned long changes; /* BNX2X_F_UPDATE_XX bits */
+	u16 vlan;
+	u16 vlan_eth_type;
+	u8 vlan_force_prio;
+	u16 vxlan_dst_port;
+	u16 geneve_dst_port;
+};
+
+struct bnx2x_func_afex_update_params {
+	u16 vif_id;
+	u16 afex_default_vlan;
+	u8 allowed_priorities;
+};
+
+struct bnx2x_func_afex_viflists_params {
+	u16 vif_list_index;
+	u8 func_bit_map;
+	u8 afex_vif_list_command;
+	u8 func_to_clear;
+};
+
+struct bnx2x_func_tx_start_params {
+	struct priority_cos traffic_type_to_priority_cos[MAX_TRAFFIC_TYPES];
+	u8 dcb_enabled;
+	u8 dcb_version;
+	u8 dont_add_pri_0_en;
+	u8 dcb_outer_pri[MAX_TRAFFIC_TYPES];
+};
+
+struct bnx2x_func_set_timesync_params {
+	/* Reset, set or keep the current drift value */
+	u8 drift_adjust_cmd;
+
+	/* Dec, inc or keep the current offset */
+	u8 offset_cmd;
+
+	/* Drift value direction */
+	u8 add_sub_drift_adjust_value;
+
+	/* Drift, period and offset values to be used according to the commands
+	 * above.
+	 */
+	u8 drift_adjust_value;
+	u32 drift_adjust_period;
+	u64 offset_delta;
+};
+
+struct bnx2x_func_state_params {
+	struct bnx2x_func_sp_obj *f_obj;
+
+	/* Current command */
+	enum bnx2x_func_cmd cmd;
+
+	/* may have RAMROD_COMP_WAIT set only */
+	unsigned long	ramrod_flags;
+
+	/* Params according to the current command */
+	union {
+		struct bnx2x_func_hw_init_params hw_init;
+		struct bnx2x_func_hw_reset_params hw_reset;
+		struct bnx2x_func_start_params start;
+		struct bnx2x_func_switch_update_params switch_update;
+		struct bnx2x_func_afex_update_params afex_update;
+		struct bnx2x_func_afex_viflists_params afex_viflists;
+		struct bnx2x_func_tx_start_params tx_start;
+		struct bnx2x_func_set_timesync_params set_timesync;
+	} params;
+};
+
+struct bnx2x_func_sp_drv_ops {
+	/* Init tool + runtime initialization:
+	 *      - Common Chip
+	 *      - Common (per Path)
+	 *      - Port
+	 *      - Function phases
+	 */
+	int (*init_hw_cmn_chip)(struct bnx2x *bp);
+	int (*init_hw_cmn)(struct bnx2x *bp);
+	int (*init_hw_port)(struct bnx2x *bp);
+	int (*init_hw_func)(struct bnx2x *bp);
+
+	/* Reset Function HW: Common, Port, Function phases. */
+	void (*reset_hw_cmn)(struct bnx2x *bp);
+	void (*reset_hw_port)(struct bnx2x *bp);
+	void (*reset_hw_func)(struct bnx2x *bp);
+
+	/* Init/Free GUNZIP resources */
+	int (*gunzip_init)(struct bnx2x *bp);
+	void (*gunzip_end)(struct bnx2x *bp);
+
+	/* Prepare/Release FW resources */
+	int (*init_fw)(struct bnx2x *bp);
+	void (*release_fw)(struct bnx2x *bp);
+};
+
+struct bnx2x_func_sp_obj {
+	enum bnx2x_func_state	state, next_state;
+
+	/* BNX2X_FUNC_CMD_XX bits. This object implements "one
+	 * pending" paradigm but for debug and tracing purposes it's
+	 * more convenient to have different bits for different
+	 * commands.
+	 */
+	unsigned long		pending;
+
+	/* Buffer to use as a ramrod data and its mapping */
+	void			*rdata;
+	dma_addr_t		rdata_mapping;
+
+	/* Buffer to use as a afex ramrod data and its mapping.
+	 * This can't be same rdata as above because afex ramrod requests
+	 * can arrive to the object in parallel to other ramrod requests.
+	 */
+	void			*afex_rdata;
+	dma_addr_t		afex_rdata_mapping;
+
+	/* this mutex validates that when pending flag is taken, the next
+	 * ramrod to be sent will be the one set the pending bit
+	 */
+	struct mutex		one_pending_mutex;
+
+	/* Driver interface */
+	struct bnx2x_func_sp_drv_ops	*drv;
+
+	/**
+	 * Performs one state change according to the given parameters.
+	 *
+	 * @return 0 in case of success and negative value otherwise.
+	 */
+	int (*send_cmd)(struct bnx2x *bp,
+			struct bnx2x_func_state_params *params);
+
+	/**
+	 * Checks that the requested state transition is legal.
+	 */
+	int (*check_transition)(struct bnx2x *bp,
+				struct bnx2x_func_sp_obj *o,
+				struct bnx2x_func_state_params *params);
+
+	/**
+	 * Completes the pending command.
+	 */
+	int (*complete_cmd)(struct bnx2x *bp,
+			    struct bnx2x_func_sp_obj *o,
+			    enum bnx2x_func_cmd cmd);
+
+	int (*wait_comp)(struct bnx2x *bp, struct bnx2x_func_sp_obj *o,
+			 enum bnx2x_func_cmd cmd);
+};
+
+/********************** Interfaces ********************************************/
+/* Queueable objects set */
+union bnx2x_qable_obj {
+	struct bnx2x_vlan_mac_obj vlan_mac;
+};
+/************** Function state update *********/
+void bnx2x_init_func_obj(struct bnx2x *bp,
+			 struct bnx2x_func_sp_obj *obj,
+			 void *rdata, dma_addr_t rdata_mapping,
+			 void *afex_rdata, dma_addr_t afex_rdata_mapping,
+			 struct bnx2x_func_sp_drv_ops *drv_iface);
+
+int bnx2x_func_state_change(struct bnx2x *bp,
+			    struct bnx2x_func_state_params *params);
+
+enum bnx2x_func_state bnx2x_func_get_state(struct bnx2x *bp,
+					   struct bnx2x_func_sp_obj *o);
+/******************* Queue State **************/
+void bnx2x_init_queue_obj(struct bnx2x *bp,
+			  struct bnx2x_queue_sp_obj *obj, u8 cl_id, u32 *cids,
+			  u8 cid_cnt, u8 func_id, void *rdata,
+			  dma_addr_t rdata_mapping, unsigned long type);
+
+int bnx2x_queue_state_change(struct bnx2x *bp,
+			     struct bnx2x_queue_state_params *params);
+
+int bnx2x_get_q_logical_state(struct bnx2x *bp,
+			       struct bnx2x_queue_sp_obj *obj);
+
+/********************* VLAN-MAC ****************/
+void bnx2x_init_mac_obj(struct bnx2x *bp,
+			struct bnx2x_vlan_mac_obj *mac_obj,
+			u8 cl_id, u32 cid, u8 func_id, void *rdata,
+			dma_addr_t rdata_mapping, int state,
+			unsigned long *pstate, bnx2x_obj_type type,
+			struct bnx2x_credit_pool_obj *macs_pool);
+
+void bnx2x_init_vlan_obj(struct bnx2x *bp,
+			 struct bnx2x_vlan_mac_obj *vlan_obj,
+			 u8 cl_id, u32 cid, u8 func_id, void *rdata,
+			 dma_addr_t rdata_mapping, int state,
+			 unsigned long *pstate, bnx2x_obj_type type,
+			 struct bnx2x_credit_pool_obj *vlans_pool);
+
+void bnx2x_init_vlan_mac_obj(struct bnx2x *bp,
+			     struct bnx2x_vlan_mac_obj *vlan_mac_obj,
+			     u8 cl_id, u32 cid, u8 func_id, void *rdata,
+			     dma_addr_t rdata_mapping, int state,
+			     unsigned long *pstate, bnx2x_obj_type type,
+			     struct bnx2x_credit_pool_obj *macs_pool,
+			     struct bnx2x_credit_pool_obj *vlans_pool);
+
+int bnx2x_vlan_mac_h_read_lock(struct bnx2x *bp,
+					struct bnx2x_vlan_mac_obj *o);
+void bnx2x_vlan_mac_h_read_unlock(struct bnx2x *bp,
+				  struct bnx2x_vlan_mac_obj *o);
+int bnx2x_vlan_mac_h_write_lock(struct bnx2x *bp,
+				struct bnx2x_vlan_mac_obj *o);
+int bnx2x_config_vlan_mac(struct bnx2x *bp,
+			   struct bnx2x_vlan_mac_ramrod_params *p);
+
+int bnx2x_vlan_mac_move(struct bnx2x *bp,
+			struct bnx2x_vlan_mac_ramrod_params *p,
+			struct bnx2x_vlan_mac_obj *dest_o);
+
+/********************* RX MODE ****************/
+
+void bnx2x_init_rx_mode_obj(struct bnx2x *bp,
+			    struct bnx2x_rx_mode_obj *o);
+
+/**
+ * bnx2x_config_rx_mode - Send and RX_MODE ramrod according to the provided parameters.
+ *
+ * @p: Command parameters
+ *
+ * Return: 0 - if operation was successful and there is no pending completions,
+ *         positive number - if there are pending completions,
+ *         negative - if there were errors
+ */
+int bnx2x_config_rx_mode(struct bnx2x *bp,
+			 struct bnx2x_rx_mode_ramrod_params *p);
+
+/****************** MULTICASTS ****************/
+
+void bnx2x_init_mcast_obj(struct bnx2x *bp,
+			  struct bnx2x_mcast_obj *mcast_obj,
+			  u8 mcast_cl_id, u32 mcast_cid, u8 func_id,
+			  u8 engine_id, void *rdata, dma_addr_t rdata_mapping,
+			  int state, unsigned long *pstate,
+			  bnx2x_obj_type type);
+
+/**
+ * bnx2x_config_mcast - Configure multicast MACs list.
+ *
+ * @cmd: command to execute: BNX2X_MCAST_CMD_X
+ *
+ * May configure a new list
+ * provided in p->mcast_list (BNX2X_MCAST_CMD_ADD), clean up
+ * (BNX2X_MCAST_CMD_DEL) or restore (BNX2X_MCAST_CMD_RESTORE) a current
+ * configuration, continue to execute the pending commands
+ * (BNX2X_MCAST_CMD_CONT).
+ *
+ * If previous command is still pending or if number of MACs to
+ * configure is more that maximum number of MACs in one command,
+ * the current command will be enqueued to the tail of the
+ * pending commands list.
+ *
+ * Return: 0 is operation was successful and there are no pending completions,
+ *         negative if there were errors, positive if there are pending
+ *         completions.
+ */
+int bnx2x_config_mcast(struct bnx2x *bp,
+		       struct bnx2x_mcast_ramrod_params *p,
+		       enum bnx2x_mcast_cmd cmd);
+
+/****************** CREDIT POOL ****************/
+void bnx2x_init_mac_credit_pool(struct bnx2x *bp,
+				struct bnx2x_credit_pool_obj *p, u8 func_id,
+				u8 func_num);
+void bnx2x_init_vlan_credit_pool(struct bnx2x *bp,
+				 struct bnx2x_credit_pool_obj *p, u8 func_id,
+				 u8 func_num);
+void bnx2x_init_credit_pool(struct bnx2x_credit_pool_obj *p,
+			    int base, int credit);
+
+/****************** RSS CONFIGURATION ****************/
+void bnx2x_init_rss_config_obj(struct bnx2x *bp,
+			       struct bnx2x_rss_config_obj *rss_obj,
+			       u8 cl_id, u32 cid, u8 func_id, u8 engine_id,
+			       void *rdata, dma_addr_t rdata_mapping,
+			       int state, unsigned long *pstate,
+			       bnx2x_obj_type type);
+
+/**
+ * bnx2x_config_rss - Updates RSS configuration according to provided parameters
+ *
+ * Return: 0 in case of success
+ */
+int bnx2x_config_rss(struct bnx2x *bp,
+		     struct bnx2x_config_rss_params *p);
+
+/**
+ * bnx2x_get_rss_ind_table - Return the current ind_table configuration.
+ *
+ * @ind_table: buffer to fill with the current indirection
+ *                  table content. Should be at least
+ *                  T_ETH_INDIRECTION_TABLE_SIZE bytes long.
+ */
+void bnx2x_get_rss_ind_table(struct bnx2x_rss_config_obj *rss_obj,
+			     u8 *ind_table);
+
+#define PF_MAC_CREDIT_E2(bp, func_num)					\
+	((MAX_MAC_CREDIT_E2 - GET_NUM_VFS_PER_PATH(bp) * VF_MAC_CREDIT_CNT) / \
+	 func_num + GET_NUM_VFS_PER_PF(bp) * VF_MAC_CREDIT_CNT)
+
+#define BNX2X_VFS_VLAN_CREDIT(bp)	\
+	(GET_NUM_VFS_PER_PATH(bp) * VF_VLAN_CREDIT_CNT)
+
+#define PF_VLAN_CREDIT_E2(bp, func_num)					 \
+	((MAX_VLAN_CREDIT_E2 - 1 - BNX2X_VFS_VLAN_CREDIT(bp)) /	\
+	 func_num + GET_NUM_VFS_PER_PF(bp) * VF_VLAN_CREDIT_CNT)
+
+#endif /* BNX2X_SP_VERBS */