Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 245 insertions, 0 deletions

diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
new file mode 100644
index 000000000..53f14c5a9
--- /dev/null
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
@@ -0,0 +1,245 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config STMMAC_ETH
+	tristate "STMicroelectronics Multi-Gigabit Ethernet driver"
+	depends on HAS_IOMEM && HAS_DMA
+	select MII
+	select PCS_XPCS
+	select PAGE_POOL
+	select PHYLINK
+	select CRC32
+	imply PTP_1588_CLOCK
+	select RESET_CONTROLLER
+	help
+	  This is the driver for the Ethernet IPs built around a
+	  Synopsys IP Core.
+
+if STMMAC_ETH
+
+config STMMAC_SELFTESTS
+	bool "Support for STMMAC Selftests"
+	depends on INET
+	depends on STMMAC_ETH
+	default n
+	help
+	  This adds support for STMMAC Selftests using ethtool. Enable this
+	  feature if you are facing problems with your HW and submit the test
+	  results to the netdev Mailing List.
+
+config STMMAC_PLATFORM
+	tristate "STMMAC Platform bus support"
+	depends on STMMAC_ETH
+	select MFD_SYSCON
+	default y
+	help
+	  This selects the platform specific bus support for the stmmac driver.
+	  This is the driver used on several SoCs:
+	  STi, Allwinner, Amlogic Meson, Altera SOCFPGA.
+
+	  If you have a controller with this interface, say Y or M here.
+
+	  If unsure, say N.
+
+if STMMAC_PLATFORM
+
+config DWMAC_DWC_QOS_ETH
+	tristate "Support for snps,dwc-qos-ethernet.txt DT binding."
+	select CRC32
+	select MII
+	depends on OF && HAS_DMA
+	help
+	  Support for chips using the snps,dwc-qos-ethernet.txt DT binding.
+
+config DWMAC_GENERIC
+	tristate "Generic driver for DWMAC"
+	default STMMAC_PLATFORM
+	help
+	  Generic DWMAC driver for platforms that don't require any
+	  platform specific code to function or is using platform
+	  data for setup.
+
+config DWMAC_ANARION
+	tristate "Adaptrum Anarion GMAC support"
+	default ARC
+	depends on OF && (ARC || COMPILE_TEST)
+	help
+	  Support for Adaptrum Anarion GMAC Ethernet controller.
+
+	  This selects the Anarion SoC glue layer support for the stmmac driver.
+
+config DWMAC_IPQ806X
+	tristate "QCA IPQ806x DWMAC support"
+	default ARCH_QCOM
+	depends on OF && (ARCH_QCOM || COMPILE_TEST)
+	select MFD_SYSCON
+	help
+	  Support for QCA IPQ806X DWMAC Ethernet.
+
+	  This selects the IPQ806x SoC glue layer support for the stmmac
+	  device driver. This driver does not use any of the hardware
+	  acceleration features available on this SoC. Network devices
+	  will behave like standard non-accelerated ethernet interfaces.
+
+config DWMAC_LPC18XX
+	tristate "NXP LPC18xx/43xx DWMAC support"
+	default ARCH_LPC18XX
+	depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
+	select MFD_SYSCON
+	help
+	  Support for NXP LPC18xx/43xx DWMAC Ethernet.
+
+config DWMAC_MEDIATEK
+	tristate "MediaTek MT27xx GMAC support"
+	depends on OF && (ARCH_MEDIATEK || COMPILE_TEST)
+	help
+	  Support for MediaTek GMAC Ethernet controller.
+
+	  This selects the MT2712 SoC support for the stmmac driver.
+
+config DWMAC_MESON
+	tristate "Amlogic Meson dwmac support"
+	default ARCH_MESON
+	depends on OF && COMMON_CLK && (ARCH_MESON || COMPILE_TEST)
+	help
+	  Support for Ethernet controller on Amlogic Meson SoCs.
+
+	  This selects the Amlogic Meson SoC glue layer support for
+	  the stmmac device driver. This driver is used for Meson6,
+	  Meson8, Meson8b and GXBB SoCs.
+
+config DWMAC_OXNAS
+	tristate "Oxford Semiconductor OXNAS dwmac support"
+	default ARCH_OXNAS
+	depends on OF && COMMON_CLK && (ARCH_OXNAS || COMPILE_TEST)
+	select MFD_SYSCON
+	help
+	  Support for Ethernet controller on Oxford Semiconductor OXNAS SoCs.
+
+	  This selects the Oxford Semiconductor OXNASSoC glue layer support for
+	  the stmmac device driver. This driver is used for OX820.
+
+config DWMAC_QCOM_ETHQOS
+	tristate "Qualcomm ETHQOS support"
+	default ARCH_QCOM
+	depends on OF && (ARCH_QCOM || COMPILE_TEST)
+	help
+	  Support for the Qualcomm ETHQOS core.
+
+	  This selects the Qualcomm ETHQOS glue layer support for the
+	  stmmac device driver.
+
+config DWMAC_ROCKCHIP
+	tristate "Rockchip dwmac support"
+	default ARCH_ROCKCHIP
+	depends on OF && (ARCH_ROCKCHIP || COMPILE_TEST)
+	select MFD_SYSCON
+	help
+	  Support for Ethernet controller on Rockchip RK3288 SoC.
+
+	  This selects the Rockchip RK3288 SoC glue layer support for
+	  the stmmac device driver.
+
+config DWMAC_SOCFPGA
+	tristate "SOCFPGA dwmac support"
+	default (ARCH_SOCFPGA || ARCH_STRATIX10)
+	depends on OF && (ARCH_SOCFPGA || ARCH_STRATIX10 || COMPILE_TEST)
+	select MFD_SYSCON
+	help
+	  Support for ethernet controller on Altera SOCFPGA
+
+	  This selects the Altera SOCFPGA SoC glue layer support
+	  for the stmmac device driver. This driver is used for
+	  arria5 and cyclone5 FPGA SoCs.
+
+config DWMAC_STI
+	tristate "STi GMAC support"
+	default ARCH_STI
+	depends on OF && (ARCH_STI || COMPILE_TEST)
+	select MFD_SYSCON
+	help
+	  Support for ethernet controller on STi SOCs.
+
+	  This selects STi SoC glue layer support for the stmmac
+	  device driver. This driver is used on for the STi series
+	  SOCs GMAC ethernet controller.
+
+config DWMAC_STM32
+	tristate "STM32 DWMAC support"
+	default ARCH_STM32
+	depends on OF && HAS_IOMEM && (ARCH_STM32 || COMPILE_TEST)
+	select MFD_SYSCON
+	help
+	  Support for ethernet controller on STM32 SOCs.
+
+	  This selects STM32 SoC glue layer support for the stmmac
+	  device driver. This driver is used on for the STM32 series
+	  SOCs GMAC ethernet controller.
+
+config DWMAC_SUNXI
+	tristate "Allwinner GMAC support"
+	default ARCH_SUNXI
+	depends on OF && (ARCH_SUNXI || COMPILE_TEST)
+	help
+	  Support for Allwinner A20/A31 GMAC ethernet controllers.
+
+	  This selects Allwinner SoC glue layer support for the
+	  stmmac device driver. This driver is used for A20/A31
+	  GMAC ethernet controller.
+
+config DWMAC_SUN8I
+	tristate "Allwinner sun8i GMAC support"
+	default ARCH_SUNXI
+	depends on OF && (ARCH_SUNXI || COMPILE_TEST)
+	select MDIO_BUS_MUX
+	help
+	  Support for Allwinner H3 A83T A64 EMAC ethernet controllers.
+
+	  This selects Allwinner SoC glue layer support for the
+	  stmmac device driver. This driver is used for H3/A83T/A64
+	  EMAC ethernet controller.
+
+config DWMAC_IMX8
+	tristate "NXP IMX8 DWMAC support"
+	default ARCH_MXC
+	depends on OF && (ARCH_MXC || COMPILE_TEST)
+	select MFD_SYSCON
+	help
+	  Support for ethernet controller on NXP i.MX8 SOCs.
+
+	  This selects NXP SoC glue layer support for the stmmac
+	  device driver. This driver is used for i.MX8 series like
+	  iMX8MP/iMX8DXL GMAC ethernet controller.
+
+config DWMAC_INTEL_PLAT
+	tristate "Intel dwmac support"
+	depends on OF && COMMON_CLK
+	depends on STMMAC_ETH
+	help
+	  Support for ethernet controllers on Intel SoCs
+
+	  This selects the Intel platform specific glue layer support for
+	  the stmmac device driver. This driver is used for the Intel Keem Bay
+	  SoC.
+endif
+
+config DWMAC_INTEL
+	tristate "Intel GMAC support"
+	default X86
+	depends on X86 && STMMAC_ETH && PCI
+	depends on COMMON_CLK
+	help
+	  This selects the Intel platform specific bus support for the
+	  stmmac driver. This driver is used for Intel Quark/EHL/TGL.
+
+config STMMAC_PCI
+	tristate "STMMAC PCI bus support"
+	depends on STMMAC_ETH && PCI
+	depends on COMMON_CLK
+	help
+	  This selects the platform specific bus support for the stmmac driver.
+	  This driver was tested on XLINX XC2V3000 FF1152AMT0221
+	  D1215994A VIRTEX FPGA board and SNPS QoS IPK Prototyping Kit.
+
+	  If you have a controller with this interface, say Y or M here.
+
+	  If unsure, say N.
+endif