Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 568 insertions, 0 deletions

diff --git a/drivers/net/phy/phy-c45.c b/drivers/net/phy/phy-c45.c
new file mode 100644
index 000000000..bd11e62bf
--- /dev/null
+++ b/drivers/net/phy/phy-c45.c
@@ -0,0 +1,568 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Clause 45 PHY support
+ */
+#include <linux/ethtool.h>
+#include <linux/export.h>
+#include <linux/mdio.h>
+#include <linux/mii.h>
+#include <linux/phy.h>
+
+/**
+ * genphy_c45_setup_forced - configures a forced speed
+ * @phydev: target phy_device struct
+ */
+int genphy_c45_pma_setup_forced(struct phy_device *phydev)
+{
+	int ctrl1, ctrl2, ret;
+
+	/* Half duplex is not supported */
+	if (phydev->duplex != DUPLEX_FULL)
+		return -EINVAL;
+
+	ctrl1 = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL1);
+	if (ctrl1 < 0)
+		return ctrl1;
+
+	ctrl2 = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL2);
+	if (ctrl2 < 0)
+		return ctrl2;
+
+	ctrl1 &= ~MDIO_CTRL1_SPEEDSEL;
+	/*
+	 * PMA/PMD type selection is 1.7.5:0 not 1.7.3:0.  See 45.2.1.6.1
+	 * in 802.3-2012 and 802.3-2015.
+	 */
+	ctrl2 &= ~(MDIO_PMA_CTRL2_TYPE | 0x30);
+
+	switch (phydev->speed) {
+	case SPEED_10:
+		ctrl2 |= MDIO_PMA_CTRL2_10BT;
+		break;
+	case SPEED_100:
+		ctrl1 |= MDIO_PMA_CTRL1_SPEED100;
+		ctrl2 |= MDIO_PMA_CTRL2_100BTX;
+		break;
+	case SPEED_1000:
+		ctrl1 |= MDIO_PMA_CTRL1_SPEED1000;
+		/* Assume 1000base-T */
+		ctrl2 |= MDIO_PMA_CTRL2_1000BT;
+		break;
+	case SPEED_2500:
+		ctrl1 |= MDIO_CTRL1_SPEED2_5G;
+		/* Assume 2.5Gbase-T */
+		ctrl2 |= MDIO_PMA_CTRL2_2_5GBT;
+		break;
+	case SPEED_5000:
+		ctrl1 |= MDIO_CTRL1_SPEED5G;
+		/* Assume 5Gbase-T */
+		ctrl2 |= MDIO_PMA_CTRL2_5GBT;
+		break;
+	case SPEED_10000:
+		ctrl1 |= MDIO_CTRL1_SPEED10G;
+		/* Assume 10Gbase-T */
+		ctrl2 |= MDIO_PMA_CTRL2_10GBT;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	ret = phy_write_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL1, ctrl1);
+	if (ret < 0)
+		return ret;
+
+	ret = phy_write_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL2, ctrl2);
+	if (ret < 0)
+		return ret;
+
+	return genphy_c45_an_disable_aneg(phydev);
+}
+EXPORT_SYMBOL_GPL(genphy_c45_pma_setup_forced);
+
+/**
+ * genphy_c45_an_config_aneg - configure advertisement registers
+ * @phydev: target phy_device struct
+ *
+ * Configure advertisement registers based on modes set in phydev->advertising
+ *
+ * Returns negative errno code on failure, 0 if advertisement didn't change,
+ * or 1 if advertised modes changed.
+ */
+int genphy_c45_an_config_aneg(struct phy_device *phydev)
+{
+	int changed, ret;
+	u32 adv;
+
+	linkmode_and(phydev->advertising, phydev->advertising,
+		     phydev->supported);
+
+	changed = genphy_config_eee_advert(phydev);
+
+	adv = linkmode_adv_to_mii_adv_t(phydev->advertising);
+
+	ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE,
+				     ADVERTISE_ALL | ADVERTISE_100BASE4 |
+				     ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM,
+				     adv);
+	if (ret < 0)
+		return ret;
+	if (ret > 0)
+		changed = 1;
+
+	adv = linkmode_adv_to_mii_10gbt_adv_t(phydev->advertising);
+
+	ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL,
+				     MDIO_AN_10GBT_CTRL_ADV10G |
+				     MDIO_AN_10GBT_CTRL_ADV5G |
+				     MDIO_AN_10GBT_CTRL_ADV2_5G, adv);
+	if (ret < 0)
+		return ret;
+	if (ret > 0)
+		changed = 1;
+
+	return changed;
+}
+EXPORT_SYMBOL_GPL(genphy_c45_an_config_aneg);
+
+/**
+ * genphy_c45_an_disable_aneg - disable auto-negotiation
+ * @phydev: target phy_device struct
+ *
+ * Disable auto-negotiation in the Clause 45 PHY. The link parameters
+ * parameters are controlled through the PMA/PMD MMD registers.
+ *
+ * Returns zero on success, negative errno code on failure.
+ */
+int genphy_c45_an_disable_aneg(struct phy_device *phydev)
+{
+
+	return phy_clear_bits_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1,
+				  MDIO_AN_CTRL1_ENABLE | MDIO_AN_CTRL1_RESTART);
+}
+EXPORT_SYMBOL_GPL(genphy_c45_an_disable_aneg);
+
+/**
+ * genphy_c45_restart_aneg - Enable and restart auto-negotiation
+ * @phydev: target phy_device struct
+ *
+ * This assumes that the auto-negotiation MMD is present.
+ *
+ * Enable and restart auto-negotiation.
+ */
+int genphy_c45_restart_aneg(struct phy_device *phydev)
+{
+	return phy_set_bits_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1,
+				MDIO_AN_CTRL1_ENABLE | MDIO_AN_CTRL1_RESTART);
+}
+EXPORT_SYMBOL_GPL(genphy_c45_restart_aneg);
+
+/**
+ * genphy_c45_check_and_restart_aneg - Enable and restart auto-negotiation
+ * @phydev: target phy_device struct
+ * @restart: whether aneg restart is requested
+ *
+ * This assumes that the auto-negotiation MMD is present.
+ *
+ * Check, and restart auto-negotiation if needed.
+ */
+int genphy_c45_check_and_restart_aneg(struct phy_device *phydev, bool restart)
+{
+	int ret;
+
+	if (!restart) {
+		/* Configure and restart aneg if it wasn't set before */
+		ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1);
+		if (ret < 0)
+			return ret;
+
+		if (!(ret & MDIO_AN_CTRL1_ENABLE))
+			restart = true;
+	}
+
+	if (restart)
+		return genphy_c45_restart_aneg(phydev);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(genphy_c45_check_and_restart_aneg);
+
+/**
+ * genphy_c45_aneg_done - return auto-negotiation complete status
+ * @phydev: target phy_device struct
+ *
+ * This assumes that the auto-negotiation MMD is present.
+ *
+ * Reads the status register from the auto-negotiation MMD, returning:
+ * - positive if auto-negotiation is complete
+ * - negative errno code on error
+ * - zero otherwise
+ */
+int genphy_c45_aneg_done(struct phy_device *phydev)
+{
+	int val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_STAT1);
+
+	return val < 0 ? val : val & MDIO_AN_STAT1_COMPLETE ? 1 : 0;
+}
+EXPORT_SYMBOL_GPL(genphy_c45_aneg_done);
+
+/**
+ * genphy_c45_read_link - read the overall link status from the MMDs
+ * @phydev: target phy_device struct
+ *
+ * Read the link status from the specified MMDs, and if they all indicate
+ * that the link is up, set phydev->link to 1.  If an error is encountered,
+ * a negative errno will be returned, otherwise zero.
+ */
+int genphy_c45_read_link(struct phy_device *phydev)
+{
+	u32 mmd_mask = MDIO_DEVS_PMAPMD;
+	int val, devad;
+	bool link = true;
+
+	if (phydev->c45_ids.mmds_present & MDIO_DEVS_AN) {
+		val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1);
+		if (val < 0)
+			return val;
+
+		/* Autoneg is being started, therefore disregard current
+		 * link status and report link as down.
+		 */
+		if (val & MDIO_AN_CTRL1_RESTART) {
+			phydev->link = 0;
+			return 0;
+		}
+	}
+
+	while (mmd_mask && link) {
+		devad = __ffs(mmd_mask);
+		mmd_mask &= ~BIT(devad);
+
+		/* The link state is latched low so that momentary link
+		 * drops can be detected. Do not double-read the status
+		 * in polling mode to detect such short link drops except
+		 * the link was already down.
+		 */
+		if (!phy_polling_mode(phydev) || !phydev->link) {
+			val = phy_read_mmd(phydev, devad, MDIO_STAT1);
+			if (val < 0)
+				return val;
+			else if (val & MDIO_STAT1_LSTATUS)
+				continue;
+		}
+
+		val = phy_read_mmd(phydev, devad, MDIO_STAT1);
+		if (val < 0)
+			return val;
+
+		if (!(val & MDIO_STAT1_LSTATUS))
+			link = false;
+	}
+
+	phydev->link = link;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(genphy_c45_read_link);
+
+/**
+ * genphy_c45_read_lpa - read the link partner advertisement and pause
+ * @phydev: target phy_device struct
+ *
+ * Read the Clause 45 defined base (7.19) and 10G (7.33) status registers,
+ * filling in the link partner advertisement, pause and asym_pause members
+ * in @phydev.  This assumes that the auto-negotiation MMD is present, and
+ * the backplane bit (7.48.0) is clear.  Clause 45 PHY drivers are expected
+ * to fill in the remainder of the link partner advert from vendor registers.
+ */
+int genphy_c45_read_lpa(struct phy_device *phydev)
+{
+	int val;
+
+	val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_STAT1);
+	if (val < 0)
+		return val;
+
+	if (!(val & MDIO_AN_STAT1_COMPLETE)) {
+		linkmode_clear_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
+				   phydev->lp_advertising);
+		mii_10gbt_stat_mod_linkmode_lpa_t(phydev->lp_advertising, 0);
+		mii_adv_mod_linkmode_adv_t(phydev->lp_advertising, 0);
+		phydev->pause = 0;
+		phydev->asym_pause = 0;
+
+		return 0;
+	}
+
+	linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->lp_advertising,
+			 val & MDIO_AN_STAT1_LPABLE);
+
+	/* Read the link partner's base page advertisement */
+	val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_LPA);
+	if (val < 0)
+		return val;
+
+	mii_adv_mod_linkmode_adv_t(phydev->lp_advertising, val);
+	phydev->pause = val & LPA_PAUSE_CAP ? 1 : 0;
+	phydev->asym_pause = val & LPA_PAUSE_ASYM ? 1 : 0;
+
+	/* Read the link partner's 10G advertisement */
+	val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_STAT);
+	if (val < 0)
+		return val;
+
+	mii_10gbt_stat_mod_linkmode_lpa_t(phydev->lp_advertising, val);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(genphy_c45_read_lpa);
+
+/**
+ * genphy_c45_read_pma - read link speed etc from PMA
+ * @phydev: target phy_device struct
+ */
+int genphy_c45_read_pma(struct phy_device *phydev)
+{
+	int val;
+
+	linkmode_zero(phydev->lp_advertising);
+
+	val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL1);
+	if (val < 0)
+		return val;
+
+	switch (val & MDIO_CTRL1_SPEEDSEL) {
+	case 0:
+		phydev->speed = SPEED_10;
+		break;
+	case MDIO_PMA_CTRL1_SPEED100:
+		phydev->speed = SPEED_100;
+		break;
+	case MDIO_PMA_CTRL1_SPEED1000:
+		phydev->speed = SPEED_1000;
+		break;
+	case MDIO_CTRL1_SPEED2_5G:
+		phydev->speed = SPEED_2500;
+		break;
+	case MDIO_CTRL1_SPEED5G:
+		phydev->speed = SPEED_5000;
+		break;
+	case MDIO_CTRL1_SPEED10G:
+		phydev->speed = SPEED_10000;
+		break;
+	default:
+		phydev->speed = SPEED_UNKNOWN;
+		break;
+	}
+
+	phydev->duplex = DUPLEX_FULL;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(genphy_c45_read_pma);
+
+/**
+ * genphy_c45_read_mdix - read mdix status from PMA
+ * @phydev: target phy_device struct
+ */
+int genphy_c45_read_mdix(struct phy_device *phydev)
+{
+	int val;
+
+	if (phydev->speed == SPEED_10000) {
+		val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD,
+				   MDIO_PMA_10GBT_SWAPPOL);
+		if (val < 0)
+			return val;
+
+		switch (val) {
+		case MDIO_PMA_10GBT_SWAPPOL_ABNX | MDIO_PMA_10GBT_SWAPPOL_CDNX:
+			phydev->mdix = ETH_TP_MDI;
+			break;
+
+		case 0:
+			phydev->mdix = ETH_TP_MDI_X;
+			break;
+
+		default:
+			phydev->mdix = ETH_TP_MDI_INVALID;
+			break;
+		}
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(genphy_c45_read_mdix);
+
+/**
+ * genphy_c45_pma_read_abilities - read supported link modes from PMA
+ * @phydev: target phy_device struct
+ *
+ * Read the supported link modes from the PMA Status 2 (1.8) register. If bit
+ * 1.8.9 is set, the list of supported modes is build using the values in the
+ * PMA Extended Abilities (1.11) register, indicating 1000BASET an 10G related
+ * modes. If bit 1.11.14 is set, then the list is also extended with the modes
+ * in the 2.5G/5G PMA Extended register (1.21), indicating if 2.5GBASET and
+ * 5GBASET are supported.
+ */
+int genphy_c45_pma_read_abilities(struct phy_device *phydev)
+{
+	int val;
+
+	linkmode_clear_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->supported);
+	if (phydev->c45_ids.mmds_present & MDIO_DEVS_AN) {
+		val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_STAT1);
+		if (val < 0)
+			return val;
+
+		if (val & MDIO_AN_STAT1_ABLE)
+			linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
+					 phydev->supported);
+	}
+
+	val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_STAT2);
+	if (val < 0)
+		return val;
+
+	linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseSR_Full_BIT,
+			 phydev->supported,
+			 val & MDIO_PMA_STAT2_10GBSR);
+
+	linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseLR_Full_BIT,
+			 phydev->supported,
+			 val & MDIO_PMA_STAT2_10GBLR);
+
+	linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseER_Full_BIT,
+			 phydev->supported,
+			 val & MDIO_PMA_STAT2_10GBER);
+
+	if (val & MDIO_PMA_STAT2_EXTABLE) {
+		val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_EXTABLE);
+		if (val < 0)
+			return val;
+
+		linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseLRM_Full_BIT,
+				 phydev->supported,
+				 val & MDIO_PMA_EXTABLE_10GBLRM);
+		linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
+				 phydev->supported,
+				 val & MDIO_PMA_EXTABLE_10GBT);
+		linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT,
+				 phydev->supported,
+				 val & MDIO_PMA_EXTABLE_10GBKX4);
+		linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseKR_Full_BIT,
+				 phydev->supported,
+				 val & MDIO_PMA_EXTABLE_10GBKR);
+		linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
+				 phydev->supported,
+				 val & MDIO_PMA_EXTABLE_1000BT);
+		linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseKX_Full_BIT,
+				 phydev->supported,
+				 val & MDIO_PMA_EXTABLE_1000BKX);
+
+		linkmode_mod_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT,
+				 phydev->supported,
+				 val & MDIO_PMA_EXTABLE_100BTX);
+		linkmode_mod_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT,
+				 phydev->supported,
+				 val & MDIO_PMA_EXTABLE_100BTX);
+
+		linkmode_mod_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT,
+				 phydev->supported,
+				 val & MDIO_PMA_EXTABLE_10BT);
+		linkmode_mod_bit(ETHTOOL_LINK_MODE_10baseT_Half_BIT,
+				 phydev->supported,
+				 val & MDIO_PMA_EXTABLE_10BT);
+
+		if (val & MDIO_PMA_EXTABLE_NBT) {
+			val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD,
+					   MDIO_PMA_NG_EXTABLE);
+			if (val < 0)
+				return val;
+
+			linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
+					 phydev->supported,
+					 val & MDIO_PMA_NG_EXTABLE_2_5GBT);
+
+			linkmode_mod_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT,
+					 phydev->supported,
+					 val & MDIO_PMA_NG_EXTABLE_5GBT);
+		}
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(genphy_c45_pma_read_abilities);
+
+/**
+ * genphy_c45_read_status - read PHY status
+ * @phydev: target phy_device struct
+ *
+ * Reads status from PHY and sets phy_device members accordingly.
+ */
+int genphy_c45_read_status(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = genphy_c45_read_link(phydev);
+	if (ret)
+		return ret;
+
+	phydev->speed = SPEED_UNKNOWN;
+	phydev->duplex = DUPLEX_UNKNOWN;
+	phydev->pause = 0;
+	phydev->asym_pause = 0;
+
+	if (phydev->autoneg == AUTONEG_ENABLE) {
+		ret = genphy_c45_read_lpa(phydev);
+		if (ret)
+			return ret;
+
+		phy_resolve_aneg_linkmode(phydev);
+	} else {
+		ret = genphy_c45_read_pma(phydev);
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(genphy_c45_read_status);
+
+/**
+ * genphy_c45_config_aneg - restart auto-negotiation or forced setup
+ * @phydev: target phy_device struct
+ *
+ * Description: If auto-negotiation is enabled, we configure the
+ *   advertising, and then restart auto-negotiation.  If it is not
+ *   enabled, then we force a configuration.
+ */
+int genphy_c45_config_aneg(struct phy_device *phydev)
+{
+	bool changed = false;
+	int ret;
+
+	if (phydev->autoneg == AUTONEG_DISABLE)
+		return genphy_c45_pma_setup_forced(phydev);
+
+	ret = genphy_c45_an_config_aneg(phydev);
+	if (ret < 0)
+		return ret;
+	if (ret > 0)
+		changed = true;
+
+	return genphy_c45_check_and_restart_aneg(phydev, changed);
+}
+EXPORT_SYMBOL_GPL(genphy_c45_config_aneg);
+
+/* The gen10g_* functions are the old Clause 45 stub */
+
+int gen10g_config_aneg(struct phy_device *phydev)
+{
+	return 0;
+}
+EXPORT_SYMBOL_GPL(gen10g_config_aneg);
+
+struct phy_driver genphy_c45_driver = {
+	.phy_id         = 0xffffffff,
+	.phy_id_mask    = 0xffffffff,
+	.name           = "Generic Clause 45 PHY",
+	.read_status    = genphy_c45_read_status,
+};