Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 236 insertions, 0 deletions

diff --git a/drivers/net/wireless/ath/ath10k/sdio.h b/drivers/net/wireless/ath/ath10k/sdio.h
new file mode 100644
index 000000000..b6ac92762
--- /dev/null
+++ b/drivers/net/wireless/ath/ath10k/sdio.h
@@ -0,0 +1,236 @@
+/* SPDX-License-Identifier: ISC */
+/*
+ * Copyright (c) 2004-2011 Atheros Communications Inc.
+ * Copyright (c) 2011-2012 Qualcomm Atheros, Inc.
+ * Copyright (c) 2016-2017 Erik Stromdahl <erik.stromdahl@gmail.com>
+ */
+
+#ifndef _SDIO_H_
+#define _SDIO_H_
+
+#define ATH10K_HIF_MBOX_BLOCK_SIZE              256
+
+#define ATH10K_SDIO_MAX_BUFFER_SIZE             4096 /*Unsure of this constant*/
+
+/* Mailbox address in SDIO address space */
+#define ATH10K_HIF_MBOX_BASE_ADDR               0x1000
+#define ATH10K_HIF_MBOX_WIDTH                   0x800
+
+#define ATH10K_HIF_MBOX_TOT_WIDTH \
+	(ATH10K_HIF_MBOX_NUM_MAX * ATH10K_HIF_MBOX_WIDTH)
+
+#define ATH10K_HIF_MBOX0_EXT_BASE_ADDR          0x5000
+#define ATH10K_HIF_MBOX0_EXT_WIDTH              (36 * 1024)
+#define ATH10K_HIF_MBOX0_EXT_WIDTH_ROME_2_0     (56 * 1024)
+#define ATH10K_HIF_MBOX1_EXT_WIDTH              (36 * 1024)
+#define ATH10K_HIF_MBOX_DUMMY_SPACE_SIZE        (2 * 1024)
+
+#define ATH10K_HTC_MBOX_MAX_PAYLOAD_LENGTH \
+	(ATH10K_SDIO_MAX_BUFFER_SIZE - sizeof(struct ath10k_htc_hdr))
+
+#define ATH10K_HIF_MBOX_NUM_MAX                 4
+#define ATH10K_SDIO_BUS_REQUEST_MAX_NUM         1024
+
+#define ATH10K_SDIO_HIF_COMMUNICATION_TIMEOUT_HZ (100 * HZ)
+
+/* HTC runs over mailbox 0 */
+#define ATH10K_HTC_MAILBOX                      0
+#define ATH10K_HTC_MAILBOX_MASK                 BIT(ATH10K_HTC_MAILBOX)
+
+/* GMBOX addresses */
+#define ATH10K_HIF_GMBOX_BASE_ADDR              0x7000
+#define ATH10K_HIF_GMBOX_WIDTH                  0x4000
+
+/* Modified versions of the sdio.h macros.
+ * The macros in sdio.h can't be used easily with the FIELD_{PREP|GET}
+ * macros in bitfield.h, so we define our own macros here.
+ */
+#define ATH10K_SDIO_DRIVE_DTSX_MASK \
+	(SDIO_DRIVE_DTSx_MASK << SDIO_DRIVE_DTSx_SHIFT)
+
+#define ATH10K_SDIO_DRIVE_DTSX_TYPE_B           0
+#define ATH10K_SDIO_DRIVE_DTSX_TYPE_A           1
+#define ATH10K_SDIO_DRIVE_DTSX_TYPE_C           2
+#define ATH10K_SDIO_DRIVE_DTSX_TYPE_D           3
+
+/* SDIO CCCR register definitions */
+#define CCCR_SDIO_IRQ_MODE_REG                  0xF0
+#define CCCR_SDIO_IRQ_MODE_REG_SDIO3            0x16
+
+#define CCCR_SDIO_DRIVER_STRENGTH_ENABLE_ADDR   0xF2
+
+#define CCCR_SDIO_DRIVER_STRENGTH_ENABLE_A      0x02
+#define CCCR_SDIO_DRIVER_STRENGTH_ENABLE_C      0x04
+#define CCCR_SDIO_DRIVER_STRENGTH_ENABLE_D      0x08
+
+#define CCCR_SDIO_ASYNC_INT_DELAY_ADDRESS       0xF0
+#define CCCR_SDIO_ASYNC_INT_DELAY_MASK          0xC0
+
+/* mode to enable special 4-bit interrupt assertion without clock */
+#define SDIO_IRQ_MODE_ASYNC_4BIT_IRQ            BIT(0)
+#define SDIO_IRQ_MODE_ASYNC_4BIT_IRQ_SDIO3      BIT(1)
+
+#define ATH10K_SDIO_TARGET_DEBUG_INTR_MASK      0x01
+
+/* The theoretical maximum number of RX messages that can be fetched
+ * from the mbox interrupt handler in one loop is derived in the following
+ * way:
+ *
+ * Let's assume that each packet in a bundle of the maximum bundle size
+ * (HTC_HOST_MAX_MSG_PER_RX_BUNDLE) has the HTC header bundle count set
+ * to the maximum value (HTC_HOST_MAX_MSG_PER_RX_BUNDLE).
+ *
+ * in this case the driver must allocate
+ * (HTC_HOST_MAX_MSG_PER_RX_BUNDLE * 2) skb's.
+ */
+#define ATH10K_SDIO_MAX_RX_MSGS \
+	(HTC_HOST_MAX_MSG_PER_RX_BUNDLE * 2)
+
+#define ATH10K_FIFO_TIMEOUT_AND_CHIP_CONTROL   0x00000868u
+#define ATH10K_FIFO_TIMEOUT_AND_CHIP_CONTROL_DISABLE_SLEEP_OFF 0xFFFEFFFF
+#define ATH10K_FIFO_TIMEOUT_AND_CHIP_CONTROL_DISABLE_SLEEP_ON 0x10000
+
+enum sdio_mbox_state {
+	SDIO_MBOX_UNKNOWN_STATE = 0,
+	SDIO_MBOX_REQUEST_TO_SLEEP_STATE = 1,
+	SDIO_MBOX_SLEEP_STATE = 2,
+	SDIO_MBOX_AWAKE_STATE = 3,
+};
+
+#define ATH10K_CIS_READ_WAIT_4_RTC_CYCLE_IN_US	125
+#define ATH10K_CIS_RTC_STATE_ADDR		0x1138
+#define ATH10K_CIS_RTC_STATE_ON			0x01
+#define ATH10K_CIS_XTAL_SETTLE_DURATION_IN_US	1500
+#define ATH10K_CIS_READ_RETRY			10
+#define ATH10K_MIN_SLEEP_INACTIVITY_TIME_MS	50
+
+/* TODO: remove this and use skb->cb instead, much cleaner approach */
+struct ath10k_sdio_bus_request {
+	struct list_head list;
+
+	/* sdio address */
+	u32 address;
+
+	struct sk_buff *skb;
+	enum ath10k_htc_ep_id eid;
+	int status;
+	/* Specifies if the current request is an HTC message.
+	 * If not, the eid is not applicable an the TX completion handler
+	 * associated with the endpoint will not be invoked.
+	 */
+	bool htc_msg;
+	/* Completion that (if set) will be invoked for non HTC requests
+	 * (htc_msg == false) when the request has been processed.
+	 */
+	struct completion *comp;
+};
+
+struct ath10k_sdio_rx_data {
+	struct sk_buff *skb;
+	size_t alloc_len;
+	size_t act_len;
+	enum ath10k_htc_ep_id eid;
+	bool part_of_bundle;
+	bool last_in_bundle;
+	bool trailer_only;
+};
+
+struct ath10k_sdio_irq_proc_regs {
+	u8 host_int_status;
+	u8 cpu_int_status;
+	u8 error_int_status;
+	u8 counter_int_status;
+	u8 mbox_frame;
+	u8 rx_lookahead_valid;
+	u8 host_int_status2;
+	u8 gmbox_rx_avail;
+	__le32 rx_lookahead[2 * ATH10K_HIF_MBOX_NUM_MAX];
+	__le32 int_status_enable;
+};
+
+struct ath10k_sdio_irq_enable_regs {
+	u8 int_status_en;
+	u8 cpu_int_status_en;
+	u8 err_int_status_en;
+	u8 cntr_int_status_en;
+};
+
+struct ath10k_sdio_irq_data {
+	/* protects irq_proc_reg and irq_en_reg below.
+	 * We use a mutex here and not a spinlock since we will have the
+	 * mutex locked while calling the sdio_memcpy_ functions.
+	 * These function require non atomic context, and hence, spinlocks
+	 * can be held while calling these functions.
+	 */
+	struct mutex mtx;
+	struct ath10k_sdio_irq_proc_regs *irq_proc_reg;
+	struct ath10k_sdio_irq_enable_regs *irq_en_reg;
+};
+
+struct ath10k_mbox_ext_info {
+	u32 htc_ext_addr;
+	u32 htc_ext_sz;
+};
+
+struct ath10k_mbox_info {
+	u32 htc_addr;
+	struct ath10k_mbox_ext_info ext_info[2];
+	u32 block_size;
+	u32 block_mask;
+	u32 gmbox_addr;
+	u32 gmbox_sz;
+};
+
+struct ath10k_sdio {
+	struct sdio_func *func;
+
+	struct ath10k_mbox_info mbox_info;
+	bool swap_mbox;
+	u32 mbox_addr[ATH10K_HTC_EP_COUNT];
+	u32 mbox_size[ATH10K_HTC_EP_COUNT];
+
+	/* available bus requests */
+	struct ath10k_sdio_bus_request bus_req[ATH10K_SDIO_BUS_REQUEST_MAX_NUM];
+	/* free list of bus requests */
+	struct list_head bus_req_freeq;
+
+	struct sk_buff_head rx_head;
+
+	/* protects access to bus_req_freeq */
+	spinlock_t lock;
+
+	struct ath10k_sdio_rx_data rx_pkts[ATH10K_SDIO_MAX_RX_MSGS];
+	size_t n_rx_pkts;
+
+	struct ath10k *ar;
+	struct ath10k_sdio_irq_data irq_data;
+
+	/* temporary buffer for sdio read.
+	 * It is allocated when probe, and used for receive bundled packets,
+	 * the read for bundled packets is not parallel, so it does not need
+	 * protected.
+	 */
+	u8 *vsg_buffer;
+
+	/* temporary buffer for BMI requests */
+	u8 *bmi_buf;
+
+	bool is_disabled;
+
+	struct workqueue_struct *workqueue;
+	struct work_struct wr_async_work;
+	struct list_head wr_asyncq;
+	/* protects access to wr_asyncq */
+	spinlock_t wr_async_lock;
+
+	struct work_struct async_work_rx;
+	struct timer_list sleep_timer;
+	enum sdio_mbox_state mbox_state;
+};
+
+static inline struct ath10k_sdio *ath10k_sdio_priv(struct ath10k *ar)
+{
+	return (struct ath10k_sdio *)ar->drv_priv;
+}
+
+#endif