Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 219 insertions, 0 deletions

diff --git a/drivers/net/wireless/ath/ath10k/thermal.c b/drivers/net/wireless/ath/ath10k/thermal.c
new file mode 100644
index 000000000..36c9a1364
--- /dev/null
+++ b/drivers/net/wireless/ath/ath10k/thermal.c
@@ -0,0 +1,219 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Copyright (c) 2014-2015 Qualcomm Atheros, Inc.
+ */
+
+#include <linux/device.h>
+#include <linux/sysfs.h>
+#include <linux/thermal.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include "core.h"
+#include "debug.h"
+#include "wmi-ops.h"
+
+static int
+ath10k_thermal_get_max_throttle_state(struct thermal_cooling_device *cdev,
+				      unsigned long *state)
+{
+	*state = ATH10K_THERMAL_THROTTLE_MAX;
+
+	return 0;
+}
+
+static int
+ath10k_thermal_get_cur_throttle_state(struct thermal_cooling_device *cdev,
+				      unsigned long *state)
+{
+	struct ath10k *ar = cdev->devdata;
+
+	mutex_lock(&ar->conf_mutex);
+	*state = ar->thermal.throttle_state;
+	mutex_unlock(&ar->conf_mutex);
+
+	return 0;
+}
+
+static int
+ath10k_thermal_set_cur_throttle_state(struct thermal_cooling_device *cdev,
+				      unsigned long throttle_state)
+{
+	struct ath10k *ar = cdev->devdata;
+
+	if (throttle_state > ATH10K_THERMAL_THROTTLE_MAX) {
+		ath10k_warn(ar, "throttle state %ld is exceeding the limit %d\n",
+			    throttle_state, ATH10K_THERMAL_THROTTLE_MAX);
+		return -EINVAL;
+	}
+	mutex_lock(&ar->conf_mutex);
+	ar->thermal.throttle_state = throttle_state;
+	ath10k_thermal_set_throttling(ar);
+	mutex_unlock(&ar->conf_mutex);
+	return 0;
+}
+
+static const struct thermal_cooling_device_ops ath10k_thermal_ops = {
+	.get_max_state = ath10k_thermal_get_max_throttle_state,
+	.get_cur_state = ath10k_thermal_get_cur_throttle_state,
+	.set_cur_state = ath10k_thermal_set_cur_throttle_state,
+};
+
+static ssize_t ath10k_thermal_show_temp(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	struct ath10k *ar = dev_get_drvdata(dev);
+	int ret, temperature;
+	unsigned long time_left;
+
+	mutex_lock(&ar->conf_mutex);
+
+	/* Can't get temperature when the card is off */
+	if (ar->state != ATH10K_STATE_ON) {
+		ret = -ENETDOWN;
+		goto out;
+	}
+
+	reinit_completion(&ar->thermal.wmi_sync);
+	ret = ath10k_wmi_pdev_get_temperature(ar);
+	if (ret) {
+		ath10k_warn(ar, "failed to read temperature %d\n", ret);
+		goto out;
+	}
+
+	if (test_bit(ATH10K_FLAG_CRASH_FLUSH, &ar->dev_flags)) {
+		ret = -ESHUTDOWN;
+		goto out;
+	}
+
+	time_left = wait_for_completion_timeout(&ar->thermal.wmi_sync,
+						ATH10K_THERMAL_SYNC_TIMEOUT_HZ);
+	if (!time_left) {
+		ath10k_warn(ar, "failed to synchronize thermal read\n");
+		ret = -ETIMEDOUT;
+		goto out;
+	}
+
+	spin_lock_bh(&ar->data_lock);
+	temperature = ar->thermal.temperature;
+	spin_unlock_bh(&ar->data_lock);
+
+	/* display in millidegree celcius */
+	ret = snprintf(buf, PAGE_SIZE, "%d\n", temperature * 1000);
+out:
+	mutex_unlock(&ar->conf_mutex);
+	return ret;
+}
+
+void ath10k_thermal_event_temperature(struct ath10k *ar, int temperature)
+{
+	spin_lock_bh(&ar->data_lock);
+	ar->thermal.temperature = temperature;
+	spin_unlock_bh(&ar->data_lock);
+	complete(&ar->thermal.wmi_sync);
+}
+
+static SENSOR_DEVICE_ATTR(temp1_input, 0444, ath10k_thermal_show_temp,
+			  NULL, 0);
+
+static struct attribute *ath10k_hwmon_attrs[] = {
+	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(ath10k_hwmon);
+
+void ath10k_thermal_set_throttling(struct ath10k *ar)
+{
+	u32 period, duration, enabled;
+	int ret;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	if (!test_bit(WMI_SERVICE_THERM_THROT, ar->wmi.svc_map))
+		return;
+
+	if (!ar->wmi.ops->gen_pdev_set_quiet_mode)
+		return;
+
+	if (ar->state != ATH10K_STATE_ON)
+		return;
+
+	period = ar->thermal.quiet_period;
+	duration = (period * ar->thermal.throttle_state) / 100;
+	enabled = duration ? 1 : 0;
+
+	ret = ath10k_wmi_pdev_set_quiet_mode(ar, period, duration,
+					     ATH10K_QUIET_START_OFFSET,
+					     enabled);
+	if (ret) {
+		ath10k_warn(ar, "failed to set quiet mode period %u duarion %u enabled %u ret %d\n",
+			    period, duration, enabled, ret);
+	}
+}
+
+int ath10k_thermal_register(struct ath10k *ar)
+{
+	struct thermal_cooling_device *cdev;
+	struct device *hwmon_dev;
+	int ret;
+
+	if (!test_bit(WMI_SERVICE_THERM_THROT, ar->wmi.svc_map))
+		return 0;
+
+	cdev = thermal_cooling_device_register("ath10k_thermal", ar,
+					       &ath10k_thermal_ops);
+
+	if (IS_ERR(cdev)) {
+		ath10k_err(ar, "failed to setup thermal device result: %ld\n",
+			   PTR_ERR(cdev));
+		return -EINVAL;
+	}
+
+	ret = sysfs_create_link(&ar->dev->kobj, &cdev->device.kobj,
+				"cooling_device");
+	if (ret) {
+		ath10k_err(ar, "failed to create cooling device symlink\n");
+		goto err_cooling_destroy;
+	}
+
+	ar->thermal.cdev = cdev;
+	ar->thermal.quiet_period = ATH10K_QUIET_PERIOD_DEFAULT;
+
+	/* Do not register hwmon device when temperature reading is not
+	 * supported by firmware
+	 */
+	if (!(ar->wmi.ops->gen_pdev_get_temperature))
+		return 0;
+
+	/* Avoid linking error on devm_hwmon_device_register_with_groups, I
+	 * guess linux/hwmon.h is missing proper stubs.
+	 */
+	if (!IS_REACHABLE(CONFIG_HWMON))
+		return 0;
+
+	hwmon_dev = devm_hwmon_device_register_with_groups(ar->dev,
+							   "ath10k_hwmon", ar,
+							   ath10k_hwmon_groups);
+	if (IS_ERR(hwmon_dev)) {
+		ath10k_err(ar, "failed to register hwmon device: %ld\n",
+			   PTR_ERR(hwmon_dev));
+		ret = -EINVAL;
+		goto err_remove_link;
+	}
+	return 0;
+
+err_remove_link:
+	sysfs_remove_link(&ar->dev->kobj, "cooling_device");
+err_cooling_destroy:
+	thermal_cooling_device_unregister(cdev);
+	return ret;
+}
+
+void ath10k_thermal_unregister(struct ath10k *ar)
+{
+	if (!test_bit(WMI_SERVICE_THERM_THROT, ar->wmi.svc_map))
+		return;
+
+	sysfs_remove_link(&ar->dev->kobj, "cooling_device");
+	thermal_cooling_device_unregister(ar->thermal.cdev);
+}