diff options
| author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-27 10:05:51 +0000 |
|---|---|---|
| committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-27 10:05:51 +0000 |
| commit | 5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 (patch) | |
| tree | a94efe259b9009378be6d90eb30d2b019d95c194 /drivers/net/wireless/ath/ath10k/wmi.h | |
| parent | Initial commit. (diff) | |
| download | linux-5d1646d90e1f2cceb9f0828f4b28318cd0ec7744.tar.xz linux-5d1646d90e1f2cceb9f0828f4b28318cd0ec7744.zip | |
Adding upstream version 5.10.209.upstream/5.10.209
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/net/wireless/ath/ath10k/wmi.h')
| -rw-r--r-- | drivers/net/wireless/ath/ath10k/wmi.h | 7514 |
1 files changed, 7514 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h new file mode 100644 index 000000000..e244b7038 --- /dev/null +++ b/drivers/net/wireless/ath/ath10k/wmi.h @@ -0,0 +1,7514 @@ +/* SPDX-License-Identifier: ISC */ +/* + * Copyright (c) 2005-2011 Atheros Communications Inc. + * Copyright (c) 2011-2017 Qualcomm Atheros, Inc. + * Copyright (c) 2018-2019, The Linux Foundation. All rights reserved. + */ + +#ifndef _WMI_H_ +#define _WMI_H_ + +#include <linux/types.h> +#include <linux/ieee80211.h> + +/* + * This file specifies the WMI interface for the Unified Software + * Architecture. + * + * It includes definitions of all the commands and events. Commands are + * messages from the host to the target. Events and Replies are messages + * from the target to the host. + * + * Ownership of correctness in regards to WMI commands belongs to the host + * driver and the target is not required to validate parameters for value, + * proper range, or any other checking. + * + * Guidelines for extending this interface are below. + * + * 1. Add new WMI commands ONLY within the specified range - 0x9000 - 0x9fff + * + * 2. Use ONLY u32 type for defining member variables within WMI + * command/event structures. Do not use u8, u16, bool or + * enum types within these structures. + * + * 3. DO NOT define bit fields within structures. Implement bit fields + * using masks if necessary. Do not use the programming language's bit + * field definition. + * + * 4. Define macros for encode/decode of u8, u16 fields within + * the u32 variables. Use these macros for set/get of these fields. + * Try to use this to optimize the structure without bloating it with + * u32 variables for every lower sized field. + * + * 5. Do not use PACK/UNPACK attributes for the structures as each member + * variable is already 4-byte aligned by virtue of being a u32 + * type. + * + * 6. Comment each parameter part of the WMI command/event structure by + * using the 2 stars at the beginning of C comment instead of one star to + * enable HTML document generation using Doxygen. + * + */ + +/* Control Path */ +struct wmi_cmd_hdr { + __le32 cmd_id; +} __packed; + +#define WMI_CMD_HDR_CMD_ID_MASK 0x00FFFFFF +#define WMI_CMD_HDR_CMD_ID_LSB 0 +#define WMI_CMD_HDR_PLT_PRIV_MASK 0xFF000000 +#define WMI_CMD_HDR_PLT_PRIV_LSB 24 + +#define HTC_PROTOCOL_VERSION 0x0002 +#define WMI_PROTOCOL_VERSION 0x0002 + +/* + * There is no signed version of __le32, so for a temporary solution come + * up with our own version. The idea is from fs/ntfs/endian.h. + * + * Use a_ prefix so that it doesn't conflict if we get proper support to + * linux/types.h. + */ +typedef __s32 __bitwise a_sle32; + +static inline a_sle32 a_cpu_to_sle32(s32 val) +{ + return (__force a_sle32)cpu_to_le32(val); +} + +static inline s32 a_sle32_to_cpu(a_sle32 val) +{ + return le32_to_cpu((__force __le32)val); +} + +enum wmi_service { + WMI_SERVICE_BEACON_OFFLOAD = 0, + WMI_SERVICE_SCAN_OFFLOAD, + WMI_SERVICE_ROAM_OFFLOAD, + WMI_SERVICE_BCN_MISS_OFFLOAD, + WMI_SERVICE_STA_PWRSAVE, + WMI_SERVICE_STA_ADVANCED_PWRSAVE, + WMI_SERVICE_AP_UAPSD, + WMI_SERVICE_AP_DFS, + WMI_SERVICE_11AC, + WMI_SERVICE_BLOCKACK, + WMI_SERVICE_PHYERR, + WMI_SERVICE_BCN_FILTER, + WMI_SERVICE_RTT, + WMI_SERVICE_RATECTRL, + WMI_SERVICE_WOW, + WMI_SERVICE_RATECTRL_CACHE, + WMI_SERVICE_IRAM_TIDS, + WMI_SERVICE_ARPNS_OFFLOAD, + WMI_SERVICE_NLO, + WMI_SERVICE_GTK_OFFLOAD, + WMI_SERVICE_SCAN_SCH, + WMI_SERVICE_CSA_OFFLOAD, + WMI_SERVICE_CHATTER, + WMI_SERVICE_COEX_FREQAVOID, + WMI_SERVICE_PACKET_POWER_SAVE, + WMI_SERVICE_FORCE_FW_HANG, + WMI_SERVICE_GPIO, + WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM, + WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, + WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, + WMI_SERVICE_STA_KEEP_ALIVE, + WMI_SERVICE_TX_ENCAP, + WMI_SERVICE_BURST, + WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, + WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, + WMI_SERVICE_ROAM_SCAN_OFFLOAD, + WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, + WMI_SERVICE_EARLY_RX, + WMI_SERVICE_STA_SMPS, + WMI_SERVICE_FWTEST, + WMI_SERVICE_STA_WMMAC, + WMI_SERVICE_TDLS, + WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE, + WMI_SERVICE_ADAPTIVE_OCS, + WMI_SERVICE_BA_SSN_SUPPORT, + WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE, + WMI_SERVICE_WLAN_HB, + WMI_SERVICE_LTE_ANT_SHARE_SUPPORT, + WMI_SERVICE_BATCH_SCAN, + WMI_SERVICE_QPOWER, + WMI_SERVICE_PLMREQ, + WMI_SERVICE_THERMAL_MGMT, + WMI_SERVICE_RMC, + WMI_SERVICE_MHF_OFFLOAD, + WMI_SERVICE_COEX_SAR, + WMI_SERVICE_BCN_TXRATE_OVERRIDE, + WMI_SERVICE_NAN, + WMI_SERVICE_L1SS_STAT, + WMI_SERVICE_ESTIMATE_LINKSPEED, + WMI_SERVICE_OBSS_SCAN, + WMI_SERVICE_TDLS_OFFCHAN, + WMI_SERVICE_TDLS_UAPSD_BUFFER_STA, + WMI_SERVICE_TDLS_UAPSD_SLEEP_STA, + WMI_SERVICE_IBSS_PWRSAVE, + WMI_SERVICE_LPASS, + WMI_SERVICE_EXTSCAN, + WMI_SERVICE_D0WOW, + WMI_SERVICE_HSOFFLOAD, + WMI_SERVICE_ROAM_HO_OFFLOAD, + WMI_SERVICE_RX_FULL_REORDER, + WMI_SERVICE_DHCP_OFFLOAD, + WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT, + WMI_SERVICE_MDNS_OFFLOAD, + WMI_SERVICE_SAP_AUTH_OFFLOAD, + WMI_SERVICE_ATF, + WMI_SERVICE_COEX_GPIO, + WMI_SERVICE_ENHANCED_PROXY_STA, + WMI_SERVICE_TT, + WMI_SERVICE_PEER_CACHING, + WMI_SERVICE_AUX_SPECTRAL_INTF, + WMI_SERVICE_AUX_CHAN_LOAD_INTF, + WMI_SERVICE_BSS_CHANNEL_INFO_64, + WMI_SERVICE_EXT_RES_CFG_SUPPORT, + WMI_SERVICE_MESH_11S, + WMI_SERVICE_MESH_NON_11S, + WMI_SERVICE_PEER_STATS, + WMI_SERVICE_RESTRT_CHNL_SUPPORT, + WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, + WMI_SERVICE_TX_MODE_PUSH_ONLY, + WMI_SERVICE_TX_MODE_PUSH_PULL, + WMI_SERVICE_TX_MODE_DYNAMIC, + WMI_SERVICE_VDEV_RX_FILTER, + WMI_SERVICE_BTCOEX, + WMI_SERVICE_CHECK_CAL_VERSION, + WMI_SERVICE_DBGLOG_WARN2, + WMI_SERVICE_BTCOEX_DUTY_CYCLE, + WMI_SERVICE_4_WIRE_COEX_SUPPORT, + WMI_SERVICE_EXTENDED_NSS_SUPPORT, + WMI_SERVICE_PROG_GPIO_BAND_SELECT, + WMI_SERVICE_SMART_LOGGING_SUPPORT, + WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, + WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY, + WMI_SERVICE_MGMT_TX_WMI, + WMI_SERVICE_TDLS_WIDER_BANDWIDTH, + WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, + WMI_SERVICE_HOST_DFS_CHECK_SUPPORT, + WMI_SERVICE_TPC_STATS_FINAL, + WMI_SERVICE_RESET_CHIP, + WMI_SERVICE_SPOOF_MAC_SUPPORT, + WMI_SERVICE_TX_DATA_ACK_RSSI, + WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT, + WMI_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT, + WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT, + WMI_SERVICE_THERM_THROT, + WMI_SERVICE_RTT_RESPONDER_ROLE, + WMI_SERVICE_PER_PACKET_SW_ENCRYPT, + WMI_SERVICE_REPORT_AIRTIME, + WMI_SERVICE_SYNC_DELETE_CMDS, + WMI_SERVICE_TX_PWR_PER_PEER, + WMI_SERVICE_SUPPORT_EXTEND_ADDRESS, + WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT, + WMI_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT, + + /* Remember to add the new value to wmi_service_name()! */ + + /* keep last */ + WMI_SERVICE_MAX, +}; + +enum wmi_10x_service { + WMI_10X_SERVICE_BEACON_OFFLOAD = 0, + WMI_10X_SERVICE_SCAN_OFFLOAD, + WMI_10X_SERVICE_ROAM_OFFLOAD, + WMI_10X_SERVICE_BCN_MISS_OFFLOAD, + WMI_10X_SERVICE_STA_PWRSAVE, + WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE, + WMI_10X_SERVICE_AP_UAPSD, + WMI_10X_SERVICE_AP_DFS, + WMI_10X_SERVICE_11AC, + WMI_10X_SERVICE_BLOCKACK, + WMI_10X_SERVICE_PHYERR, + WMI_10X_SERVICE_BCN_FILTER, + WMI_10X_SERVICE_RTT, + WMI_10X_SERVICE_RATECTRL, + WMI_10X_SERVICE_WOW, + WMI_10X_SERVICE_RATECTRL_CACHE, + WMI_10X_SERVICE_IRAM_TIDS, + WMI_10X_SERVICE_BURST, + + /* introduced in 10.2 */ + WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT, + WMI_10X_SERVICE_FORCE_FW_HANG, + WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT, + WMI_10X_SERVICE_ATF, + WMI_10X_SERVICE_COEX_GPIO, + WMI_10X_SERVICE_AUX_SPECTRAL_INTF, + WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF, + WMI_10X_SERVICE_BSS_CHANNEL_INFO_64, + WMI_10X_SERVICE_MESH, + WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT, + WMI_10X_SERVICE_PEER_STATS, + WMI_10X_SERVICE_RESET_CHIP, + WMI_10X_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, + WMI_10X_SERVICE_VDEV_BCN_RATE_CONTROL, + WMI_10X_SERVICE_PER_PACKET_SW_ENCRYPT, + WMI_10X_SERVICE_BB_TIMING_CONFIG_SUPPORT, +}; + +enum wmi_main_service { + WMI_MAIN_SERVICE_BEACON_OFFLOAD = 0, + WMI_MAIN_SERVICE_SCAN_OFFLOAD, + WMI_MAIN_SERVICE_ROAM_OFFLOAD, + WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD, + WMI_MAIN_SERVICE_STA_PWRSAVE, + WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE, + WMI_MAIN_SERVICE_AP_UAPSD, + WMI_MAIN_SERVICE_AP_DFS, + WMI_MAIN_SERVICE_11AC, + WMI_MAIN_SERVICE_BLOCKACK, + WMI_MAIN_SERVICE_PHYERR, + WMI_MAIN_SERVICE_BCN_FILTER, + WMI_MAIN_SERVICE_RTT, + WMI_MAIN_SERVICE_RATECTRL, + WMI_MAIN_SERVICE_WOW, + WMI_MAIN_SERVICE_RATECTRL_CACHE, + WMI_MAIN_SERVICE_IRAM_TIDS, + WMI_MAIN_SERVICE_ARPNS_OFFLOAD, + WMI_MAIN_SERVICE_NLO, + WMI_MAIN_SERVICE_GTK_OFFLOAD, + WMI_MAIN_SERVICE_SCAN_SCH, + WMI_MAIN_SERVICE_CSA_OFFLOAD, + WMI_MAIN_SERVICE_CHATTER, + WMI_MAIN_SERVICE_COEX_FREQAVOID, + WMI_MAIN_SERVICE_PACKET_POWER_SAVE, + WMI_MAIN_SERVICE_FORCE_FW_HANG, + WMI_MAIN_SERVICE_GPIO, + WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM, + WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, + WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, + WMI_MAIN_SERVICE_STA_KEEP_ALIVE, + WMI_MAIN_SERVICE_TX_ENCAP, +}; + +enum wmi_10_4_service { + WMI_10_4_SERVICE_BEACON_OFFLOAD = 0, + WMI_10_4_SERVICE_SCAN_OFFLOAD, + WMI_10_4_SERVICE_ROAM_OFFLOAD, + WMI_10_4_SERVICE_BCN_MISS_OFFLOAD, + WMI_10_4_SERVICE_STA_PWRSAVE, + WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE, + WMI_10_4_SERVICE_AP_UAPSD, + WMI_10_4_SERVICE_AP_DFS, + WMI_10_4_SERVICE_11AC, + WMI_10_4_SERVICE_BLOCKACK, + WMI_10_4_SERVICE_PHYERR, + WMI_10_4_SERVICE_BCN_FILTER, + WMI_10_4_SERVICE_RTT, + WMI_10_4_SERVICE_RATECTRL, + WMI_10_4_SERVICE_WOW, + WMI_10_4_SERVICE_RATECTRL_CACHE, + WMI_10_4_SERVICE_IRAM_TIDS, + WMI_10_4_SERVICE_BURST, + WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT, + WMI_10_4_SERVICE_GTK_OFFLOAD, + WMI_10_4_SERVICE_SCAN_SCH, + WMI_10_4_SERVICE_CSA_OFFLOAD, + WMI_10_4_SERVICE_CHATTER, + WMI_10_4_SERVICE_COEX_FREQAVOID, + WMI_10_4_SERVICE_PACKET_POWER_SAVE, + WMI_10_4_SERVICE_FORCE_FW_HANG, + WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT, + WMI_10_4_SERVICE_GPIO, + WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, + WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, + WMI_10_4_SERVICE_STA_KEEP_ALIVE, + WMI_10_4_SERVICE_TX_ENCAP, + WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, + WMI_10_4_SERVICE_EARLY_RX, + WMI_10_4_SERVICE_ENHANCED_PROXY_STA, + WMI_10_4_SERVICE_TT, + WMI_10_4_SERVICE_ATF, + WMI_10_4_SERVICE_PEER_CACHING, + WMI_10_4_SERVICE_COEX_GPIO, + WMI_10_4_SERVICE_AUX_SPECTRAL_INTF, + WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF, + WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64, + WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT, + WMI_10_4_SERVICE_MESH_NON_11S, + WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT, + WMI_10_4_SERVICE_PEER_STATS, + WMI_10_4_SERVICE_MESH_11S, + WMI_10_4_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, + WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY, + WMI_10_4_SERVICE_TX_MODE_PUSH_PULL, + WMI_10_4_SERVICE_TX_MODE_DYNAMIC, + WMI_10_4_SERVICE_VDEV_RX_FILTER, + WMI_10_4_SERVICE_BTCOEX, + WMI_10_4_SERVICE_CHECK_CAL_VERSION, + WMI_10_4_SERVICE_DBGLOG_WARN2, + WMI_10_4_SERVICE_BTCOEX_DUTY_CYCLE, + WMI_10_4_SERVICE_4_WIRE_COEX_SUPPORT, + WMI_10_4_SERVICE_EXTENDED_NSS_SUPPORT, + WMI_10_4_SERVICE_PROG_GPIO_BAND_SELECT, + WMI_10_4_SERVICE_SMART_LOGGING_SUPPORT, + WMI_10_4_SERVICE_TDLS, + WMI_10_4_SERVICE_TDLS_OFFCHAN, + WMI_10_4_SERVICE_TDLS_UAPSD_BUFFER_STA, + WMI_10_4_SERVICE_TDLS_UAPSD_SLEEP_STA, + WMI_10_4_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, + WMI_10_4_SERVICE_TDLS_EXPLICIT_MODE_ONLY, + WMI_10_4_SERVICE_TDLS_WIDER_BANDWIDTH, + WMI_10_4_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, + WMI_10_4_SERVICE_HOST_DFS_CHECK_SUPPORT, + WMI_10_4_SERVICE_TPC_STATS_FINAL, + WMI_10_4_SERVICE_CFR_CAPTURE_SUPPORT, + WMI_10_4_SERVICE_TX_DATA_ACK_RSSI, + WMI_10_4_SERVICE_CFR_CAPTURE_IND_MSG_TYPE_LEGACY, + WMI_10_4_SERVICE_PER_PACKET_SW_ENCRYPT, + WMI_10_4_SERVICE_PEER_TID_CONFIGS_SUPPORT, + WMI_10_4_SERVICE_VDEV_BCN_RATE_CONTROL, + WMI_10_4_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT, + WMI_10_4_SERVICE_HTT_ASSERT_TRIGGER_SUPPORT, + WMI_10_4_SERVICE_VDEV_FILTER_NEIGHBOR_RX_PACKETS, + WMI_10_4_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT, + WMI_10_4_SERVICE_PEER_CHWIDTH_CHANGE, + WMI_10_4_SERVICE_RX_FILTER_OUT_COUNT, + WMI_10_4_SERVICE_RTT_RESPONDER_ROLE, + WMI_10_4_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT, + WMI_10_4_SERVICE_REPORT_AIRTIME, + WMI_10_4_SERVICE_TX_PWR_PER_PEER, + WMI_10_4_SERVICE_FETCH_PEER_TX_PN, + WMI_10_4_SERVICE_MULTIPLE_VDEV_RESTART, + WMI_10_4_SERVICE_ENHANCED_RADIO_COUNTERS, + WMI_10_4_SERVICE_QINQ_SUPPORT, + WMI_10_4_SERVICE_RESET_CHIP, +}; + +static inline char *wmi_service_name(enum wmi_service service_id) +{ +#define SVCSTR(x) case x: return #x + + switch (service_id) { + SVCSTR(WMI_SERVICE_BEACON_OFFLOAD); + SVCSTR(WMI_SERVICE_SCAN_OFFLOAD); + SVCSTR(WMI_SERVICE_ROAM_OFFLOAD); + SVCSTR(WMI_SERVICE_BCN_MISS_OFFLOAD); + SVCSTR(WMI_SERVICE_STA_PWRSAVE); + SVCSTR(WMI_SERVICE_STA_ADVANCED_PWRSAVE); + SVCSTR(WMI_SERVICE_AP_UAPSD); + SVCSTR(WMI_SERVICE_AP_DFS); + SVCSTR(WMI_SERVICE_11AC); + SVCSTR(WMI_SERVICE_BLOCKACK); + SVCSTR(WMI_SERVICE_PHYERR); + SVCSTR(WMI_SERVICE_BCN_FILTER); + SVCSTR(WMI_SERVICE_RTT); + SVCSTR(WMI_SERVICE_RATECTRL); + SVCSTR(WMI_SERVICE_WOW); + SVCSTR(WMI_SERVICE_RATECTRL_CACHE); + SVCSTR(WMI_SERVICE_IRAM_TIDS); + SVCSTR(WMI_SERVICE_ARPNS_OFFLOAD); + SVCSTR(WMI_SERVICE_NLO); + SVCSTR(WMI_SERVICE_GTK_OFFLOAD); + SVCSTR(WMI_SERVICE_SCAN_SCH); + SVCSTR(WMI_SERVICE_CSA_OFFLOAD); + SVCSTR(WMI_SERVICE_CHATTER); + SVCSTR(WMI_SERVICE_COEX_FREQAVOID); + SVCSTR(WMI_SERVICE_PACKET_POWER_SAVE); + SVCSTR(WMI_SERVICE_FORCE_FW_HANG); + SVCSTR(WMI_SERVICE_GPIO); + SVCSTR(WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM); + SVCSTR(WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG); + SVCSTR(WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG); + SVCSTR(WMI_SERVICE_STA_KEEP_ALIVE); + SVCSTR(WMI_SERVICE_TX_ENCAP); + SVCSTR(WMI_SERVICE_BURST); + SVCSTR(WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT); + SVCSTR(WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT); + SVCSTR(WMI_SERVICE_ROAM_SCAN_OFFLOAD); + SVCSTR(WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC); + SVCSTR(WMI_SERVICE_EARLY_RX); + SVCSTR(WMI_SERVICE_STA_SMPS); + SVCSTR(WMI_SERVICE_FWTEST); + SVCSTR(WMI_SERVICE_STA_WMMAC); + SVCSTR(WMI_SERVICE_TDLS); + SVCSTR(WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE); + SVCSTR(WMI_SERVICE_ADAPTIVE_OCS); + SVCSTR(WMI_SERVICE_BA_SSN_SUPPORT); + SVCSTR(WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE); + SVCSTR(WMI_SERVICE_WLAN_HB); + SVCSTR(WMI_SERVICE_LTE_ANT_SHARE_SUPPORT); + SVCSTR(WMI_SERVICE_BATCH_SCAN); + SVCSTR(WMI_SERVICE_QPOWER); + SVCSTR(WMI_SERVICE_PLMREQ); + SVCSTR(WMI_SERVICE_THERMAL_MGMT); + SVCSTR(WMI_SERVICE_RMC); + SVCSTR(WMI_SERVICE_MHF_OFFLOAD); + SVCSTR(WMI_SERVICE_COEX_SAR); + SVCSTR(WMI_SERVICE_BCN_TXRATE_OVERRIDE); + SVCSTR(WMI_SERVICE_NAN); + SVCSTR(WMI_SERVICE_L1SS_STAT); + SVCSTR(WMI_SERVICE_ESTIMATE_LINKSPEED); + SVCSTR(WMI_SERVICE_OBSS_SCAN); + SVCSTR(WMI_SERVICE_TDLS_OFFCHAN); + SVCSTR(WMI_SERVICE_TDLS_UAPSD_BUFFER_STA); + SVCSTR(WMI_SERVICE_TDLS_UAPSD_SLEEP_STA); + SVCSTR(WMI_SERVICE_IBSS_PWRSAVE); + SVCSTR(WMI_SERVICE_LPASS); + SVCSTR(WMI_SERVICE_EXTSCAN); + SVCSTR(WMI_SERVICE_D0WOW); + SVCSTR(WMI_SERVICE_HSOFFLOAD); + SVCSTR(WMI_SERVICE_ROAM_HO_OFFLOAD); + SVCSTR(WMI_SERVICE_RX_FULL_REORDER); + SVCSTR(WMI_SERVICE_DHCP_OFFLOAD); + SVCSTR(WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT); + SVCSTR(WMI_SERVICE_MDNS_OFFLOAD); + SVCSTR(WMI_SERVICE_SAP_AUTH_OFFLOAD); + SVCSTR(WMI_SERVICE_ATF); + SVCSTR(WMI_SERVICE_COEX_GPIO); + SVCSTR(WMI_SERVICE_ENHANCED_PROXY_STA); + SVCSTR(WMI_SERVICE_TT); + SVCSTR(WMI_SERVICE_PEER_CACHING); + SVCSTR(WMI_SERVICE_AUX_SPECTRAL_INTF); + SVCSTR(WMI_SERVICE_AUX_CHAN_LOAD_INTF); + SVCSTR(WMI_SERVICE_BSS_CHANNEL_INFO_64); + SVCSTR(WMI_SERVICE_EXT_RES_CFG_SUPPORT); + SVCSTR(WMI_SERVICE_MESH_11S); + SVCSTR(WMI_SERVICE_MESH_NON_11S); + SVCSTR(WMI_SERVICE_PEER_STATS); + SVCSTR(WMI_SERVICE_RESTRT_CHNL_SUPPORT); + SVCSTR(WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT); + SVCSTR(WMI_SERVICE_TX_MODE_PUSH_ONLY); + SVCSTR(WMI_SERVICE_TX_MODE_PUSH_PULL); + SVCSTR(WMI_SERVICE_TX_MODE_DYNAMIC); + SVCSTR(WMI_SERVICE_VDEV_RX_FILTER); + SVCSTR(WMI_SERVICE_BTCOEX); + SVCSTR(WMI_SERVICE_CHECK_CAL_VERSION); + SVCSTR(WMI_SERVICE_DBGLOG_WARN2); + SVCSTR(WMI_SERVICE_BTCOEX_DUTY_CYCLE); + SVCSTR(WMI_SERVICE_4_WIRE_COEX_SUPPORT); + SVCSTR(WMI_SERVICE_EXTENDED_NSS_SUPPORT); + SVCSTR(WMI_SERVICE_PROG_GPIO_BAND_SELECT); + SVCSTR(WMI_SERVICE_SMART_LOGGING_SUPPORT); + SVCSTR(WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE); + SVCSTR(WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY); + SVCSTR(WMI_SERVICE_MGMT_TX_WMI); + SVCSTR(WMI_SERVICE_TDLS_WIDER_BANDWIDTH); + SVCSTR(WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS); + SVCSTR(WMI_SERVICE_HOST_DFS_CHECK_SUPPORT); + SVCSTR(WMI_SERVICE_TPC_STATS_FINAL); + SVCSTR(WMI_SERVICE_RESET_CHIP); + SVCSTR(WMI_SERVICE_SPOOF_MAC_SUPPORT); + SVCSTR(WMI_SERVICE_TX_DATA_ACK_RSSI); + SVCSTR(WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT); + SVCSTR(WMI_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT); + SVCSTR(WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT); + SVCSTR(WMI_SERVICE_THERM_THROT); + SVCSTR(WMI_SERVICE_RTT_RESPONDER_ROLE); + SVCSTR(WMI_SERVICE_PER_PACKET_SW_ENCRYPT); + SVCSTR(WMI_SERVICE_REPORT_AIRTIME); + SVCSTR(WMI_SERVICE_SYNC_DELETE_CMDS); + SVCSTR(WMI_SERVICE_TX_PWR_PER_PEER); + SVCSTR(WMI_SERVICE_SUPPORT_EXTEND_ADDRESS); + SVCSTR(WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT); + SVCSTR(WMI_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT); + + case WMI_SERVICE_MAX: + return NULL; + } + +#undef SVCSTR + + return NULL; +} + +#define WMI_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id, len) \ + ((svc_id) < (len) && \ + __le32_to_cpu((wmi_svc_bmap)[(svc_id) / (sizeof(u32))]) & \ + BIT((svc_id) % (sizeof(u32)))) + +/* This extension is required to accommodate new services, current limit + * for wmi_services is 64 as target is using only 4-bits of each 32-bit + * wmi_service word. Extending this to make use of remaining unused bits + * for new services. + */ +#define WMI_EXT_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id, len) \ + ((svc_id) >= (len) && \ + __le32_to_cpu((wmi_svc_bmap)[((svc_id) - (len)) / 28]) & \ + BIT(((((svc_id) - (len)) % 28) & 0x1f) + 4)) + +#define SVCMAP(x, y, len) \ + do { \ + if ((WMI_SERVICE_IS_ENABLED((in), (x), (len))) || \ + (WMI_EXT_SERVICE_IS_ENABLED((in), (x), (len)))) \ + __set_bit(y, out); \ + } while (0) + +static inline void wmi_10x_svc_map(const __le32 *in, unsigned long *out, + size_t len) +{ + SVCMAP(WMI_10X_SERVICE_BEACON_OFFLOAD, + WMI_SERVICE_BEACON_OFFLOAD, len); + SVCMAP(WMI_10X_SERVICE_SCAN_OFFLOAD, + WMI_SERVICE_SCAN_OFFLOAD, len); + SVCMAP(WMI_10X_SERVICE_ROAM_OFFLOAD, + WMI_SERVICE_ROAM_OFFLOAD, len); + SVCMAP(WMI_10X_SERVICE_BCN_MISS_OFFLOAD, + WMI_SERVICE_BCN_MISS_OFFLOAD, len); + SVCMAP(WMI_10X_SERVICE_STA_PWRSAVE, + WMI_SERVICE_STA_PWRSAVE, len); + SVCMAP(WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE, + WMI_SERVICE_STA_ADVANCED_PWRSAVE, len); + SVCMAP(WMI_10X_SERVICE_AP_UAPSD, + WMI_SERVICE_AP_UAPSD, len); + SVCMAP(WMI_10X_SERVICE_AP_DFS, + WMI_SERVICE_AP_DFS, len); + SVCMAP(WMI_10X_SERVICE_11AC, + WMI_SERVICE_11AC, len); + SVCMAP(WMI_10X_SERVICE_BLOCKACK, + WMI_SERVICE_BLOCKACK, len); + SVCMAP(WMI_10X_SERVICE_PHYERR, + WMI_SERVICE_PHYERR, len); + SVCMAP(WMI_10X_SERVICE_BCN_FILTER, + WMI_SERVICE_BCN_FILTER, len); + SVCMAP(WMI_10X_SERVICE_RTT, + WMI_SERVICE_RTT, len); + SVCMAP(WMI_10X_SERVICE_RATECTRL, + WMI_SERVICE_RATECTRL, len); + SVCMAP(WMI_10X_SERVICE_WOW, + WMI_SERVICE_WOW, len); + SVCMAP(WMI_10X_SERVICE_RATECTRL_CACHE, + WMI_SERVICE_RATECTRL_CACHE, len); + SVCMAP(WMI_10X_SERVICE_IRAM_TIDS, + WMI_SERVICE_IRAM_TIDS, len); + SVCMAP(WMI_10X_SERVICE_BURST, + WMI_SERVICE_BURST, len); + SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT, + WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len); + SVCMAP(WMI_10X_SERVICE_FORCE_FW_HANG, + WMI_SERVICE_FORCE_FW_HANG, len); + SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT, + WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len); + SVCMAP(WMI_10X_SERVICE_ATF, + WMI_SERVICE_ATF, len); + SVCMAP(WMI_10X_SERVICE_COEX_GPIO, + WMI_SERVICE_COEX_GPIO, len); + SVCMAP(WMI_10X_SERVICE_AUX_SPECTRAL_INTF, + WMI_SERVICE_AUX_SPECTRAL_INTF, len); + SVCMAP(WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF, + WMI_SERVICE_AUX_CHAN_LOAD_INTF, len); + SVCMAP(WMI_10X_SERVICE_BSS_CHANNEL_INFO_64, + WMI_SERVICE_BSS_CHANNEL_INFO_64, len); + SVCMAP(WMI_10X_SERVICE_MESH, + WMI_SERVICE_MESH_11S, len); + SVCMAP(WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT, + WMI_SERVICE_EXT_RES_CFG_SUPPORT, len); + SVCMAP(WMI_10X_SERVICE_PEER_STATS, + WMI_SERVICE_PEER_STATS, len); + SVCMAP(WMI_10X_SERVICE_RESET_CHIP, + WMI_SERVICE_RESET_CHIP, len); + SVCMAP(WMI_10X_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, + WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, len); + SVCMAP(WMI_10X_SERVICE_BB_TIMING_CONFIG_SUPPORT, + WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT, len); + SVCMAP(WMI_10X_SERVICE_PER_PACKET_SW_ENCRYPT, + WMI_SERVICE_PER_PACKET_SW_ENCRYPT, len); +} + +static inline void wmi_main_svc_map(const __le32 *in, unsigned long *out, + size_t len) +{ + SVCMAP(WMI_MAIN_SERVICE_BEACON_OFFLOAD, + WMI_SERVICE_BEACON_OFFLOAD, len); + SVCMAP(WMI_MAIN_SERVICE_SCAN_OFFLOAD, + WMI_SERVICE_SCAN_OFFLOAD, len); + SVCMAP(WMI_MAIN_SERVICE_ROAM_OFFLOAD, + WMI_SERVICE_ROAM_OFFLOAD, len); + SVCMAP(WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD, + WMI_SERVICE_BCN_MISS_OFFLOAD, len); + SVCMAP(WMI_MAIN_SERVICE_STA_PWRSAVE, + WMI_SERVICE_STA_PWRSAVE, len); + SVCMAP(WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE, + WMI_SERVICE_STA_ADVANCED_PWRSAVE, len); + SVCMAP(WMI_MAIN_SERVICE_AP_UAPSD, + WMI_SERVICE_AP_UAPSD, len); + SVCMAP(WMI_MAIN_SERVICE_AP_DFS, + WMI_SERVICE_AP_DFS, len); + SVCMAP(WMI_MAIN_SERVICE_11AC, + WMI_SERVICE_11AC, len); + SVCMAP(WMI_MAIN_SERVICE_BLOCKACK, + WMI_SERVICE_BLOCKACK, len); + SVCMAP(WMI_MAIN_SERVICE_PHYERR, + WMI_SERVICE_PHYERR, len); + SVCMAP(WMI_MAIN_SERVICE_BCN_FILTER, + WMI_SERVICE_BCN_FILTER, len); + SVCMAP(WMI_MAIN_SERVICE_RTT, + WMI_SERVICE_RTT, len); + SVCMAP(WMI_MAIN_SERVICE_RATECTRL, + WMI_SERVICE_RATECTRL, len); + SVCMAP(WMI_MAIN_SERVICE_WOW, + WMI_SERVICE_WOW, len); + SVCMAP(WMI_MAIN_SERVICE_RATECTRL_CACHE, + WMI_SERVICE_RATECTRL_CACHE, len); + SVCMAP(WMI_MAIN_SERVICE_IRAM_TIDS, + WMI_SERVICE_IRAM_TIDS, len); + SVCMAP(WMI_MAIN_SERVICE_ARPNS_OFFLOAD, + WMI_SERVICE_ARPNS_OFFLOAD, len); + SVCMAP(WMI_MAIN_SERVICE_NLO, + WMI_SERVICE_NLO, len); + SVCMAP(WMI_MAIN_SERVICE_GTK_OFFLOAD, + WMI_SERVICE_GTK_OFFLOAD, len); + SVCMAP(WMI_MAIN_SERVICE_SCAN_SCH, + WMI_SERVICE_SCAN_SCH, len); + SVCMAP(WMI_MAIN_SERVICE_CSA_OFFLOAD, + WMI_SERVICE_CSA_OFFLOAD, len); + SVCMAP(WMI_MAIN_SERVICE_CHATTER, + WMI_SERVICE_CHATTER, len); + SVCMAP(WMI_MAIN_SERVICE_COEX_FREQAVOID, + WMI_SERVICE_COEX_FREQAVOID, len); + SVCMAP(WMI_MAIN_SERVICE_PACKET_POWER_SAVE, + WMI_SERVICE_PACKET_POWER_SAVE, len); + SVCMAP(WMI_MAIN_SERVICE_FORCE_FW_HANG, + WMI_SERVICE_FORCE_FW_HANG, len); + SVCMAP(WMI_MAIN_SERVICE_GPIO, + WMI_SERVICE_GPIO, len); + SVCMAP(WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM, + WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM, len); + SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, + WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len); + SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, + WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len); + SVCMAP(WMI_MAIN_SERVICE_STA_KEEP_ALIVE, + WMI_SERVICE_STA_KEEP_ALIVE, len); + SVCMAP(WMI_MAIN_SERVICE_TX_ENCAP, + WMI_SERVICE_TX_ENCAP, len); +} + +static inline void wmi_10_4_svc_map(const __le32 *in, unsigned long *out, + size_t len) +{ + SVCMAP(WMI_10_4_SERVICE_BEACON_OFFLOAD, + WMI_SERVICE_BEACON_OFFLOAD, len); + SVCMAP(WMI_10_4_SERVICE_SCAN_OFFLOAD, + WMI_SERVICE_SCAN_OFFLOAD, len); + SVCMAP(WMI_10_4_SERVICE_ROAM_OFFLOAD, + WMI_SERVICE_ROAM_OFFLOAD, len); + SVCMAP(WMI_10_4_SERVICE_BCN_MISS_OFFLOAD, + WMI_SERVICE_BCN_MISS_OFFLOAD, len); + SVCMAP(WMI_10_4_SERVICE_STA_PWRSAVE, + WMI_SERVICE_STA_PWRSAVE, len); + SVCMAP(WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE, + WMI_SERVICE_STA_ADVANCED_PWRSAVE, len); + SVCMAP(WMI_10_4_SERVICE_AP_UAPSD, + WMI_SERVICE_AP_UAPSD, len); + SVCMAP(WMI_10_4_SERVICE_AP_DFS, + WMI_SERVICE_AP_DFS, len); + SVCMAP(WMI_10_4_SERVICE_11AC, + WMI_SERVICE_11AC, len); + SVCMAP(WMI_10_4_SERVICE_BLOCKACK, + WMI_SERVICE_BLOCKACK, len); + SVCMAP(WMI_10_4_SERVICE_PHYERR, + WMI_SERVICE_PHYERR, len); + SVCMAP(WMI_10_4_SERVICE_BCN_FILTER, + WMI_SERVICE_BCN_FILTER, len); + SVCMAP(WMI_10_4_SERVICE_RTT, + WMI_SERVICE_RTT, len); + SVCMAP(WMI_10_4_SERVICE_RATECTRL, + WMI_SERVICE_RATECTRL, len); + SVCMAP(WMI_10_4_SERVICE_WOW, + WMI_SERVICE_WOW, len); + SVCMAP(WMI_10_4_SERVICE_RATECTRL_CACHE, + WMI_SERVICE_RATECTRL_CACHE, len); + SVCMAP(WMI_10_4_SERVICE_IRAM_TIDS, + WMI_SERVICE_IRAM_TIDS, len); + SVCMAP(WMI_10_4_SERVICE_BURST, + WMI_SERVICE_BURST, len); + SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT, + WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len); + SVCMAP(WMI_10_4_SERVICE_GTK_OFFLOAD, + WMI_SERVICE_GTK_OFFLOAD, len); + SVCMAP(WMI_10_4_SERVICE_SCAN_SCH, + WMI_SERVICE_SCAN_SCH, len); + SVCMAP(WMI_10_4_SERVICE_CSA_OFFLOAD, + WMI_SERVICE_CSA_OFFLOAD, len); + SVCMAP(WMI_10_4_SERVICE_CHATTER, + WMI_SERVICE_CHATTER, len); + SVCMAP(WMI_10_4_SERVICE_COEX_FREQAVOID, + WMI_SERVICE_COEX_FREQAVOID, len); + SVCMAP(WMI_10_4_SERVICE_PACKET_POWER_SAVE, + WMI_SERVICE_PACKET_POWER_SAVE, len); + SVCMAP(WMI_10_4_SERVICE_FORCE_FW_HANG, + WMI_SERVICE_FORCE_FW_HANG, len); + SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT, + WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len); + SVCMAP(WMI_10_4_SERVICE_GPIO, + WMI_SERVICE_GPIO, len); + SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, + WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len); + SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, + WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len); + SVCMAP(WMI_10_4_SERVICE_STA_KEEP_ALIVE, + WMI_SERVICE_STA_KEEP_ALIVE, len); + SVCMAP(WMI_10_4_SERVICE_TX_ENCAP, + WMI_SERVICE_TX_ENCAP, len); + SVCMAP(WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, + WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, len); + SVCMAP(WMI_10_4_SERVICE_EARLY_RX, + WMI_SERVICE_EARLY_RX, len); + SVCMAP(WMI_10_4_SERVICE_ENHANCED_PROXY_STA, + WMI_SERVICE_ENHANCED_PROXY_STA, len); + SVCMAP(WMI_10_4_SERVICE_TT, + WMI_SERVICE_TT, len); + SVCMAP(WMI_10_4_SERVICE_ATF, + WMI_SERVICE_ATF, len); + SVCMAP(WMI_10_4_SERVICE_PEER_CACHING, + WMI_SERVICE_PEER_CACHING, len); + SVCMAP(WMI_10_4_SERVICE_COEX_GPIO, + WMI_SERVICE_COEX_GPIO, len); + SVCMAP(WMI_10_4_SERVICE_AUX_SPECTRAL_INTF, + WMI_SERVICE_AUX_SPECTRAL_INTF, len); + SVCMAP(WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF, + WMI_SERVICE_AUX_CHAN_LOAD_INTF, len); + SVCMAP(WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64, + WMI_SERVICE_BSS_CHANNEL_INFO_64, len); + SVCMAP(WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT, + WMI_SERVICE_EXT_RES_CFG_SUPPORT, len); + SVCMAP(WMI_10_4_SERVICE_MESH_NON_11S, + WMI_SERVICE_MESH_NON_11S, len); + SVCMAP(WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT, + WMI_SERVICE_RESTRT_CHNL_SUPPORT, len); + SVCMAP(WMI_10_4_SERVICE_PEER_STATS, + WMI_SERVICE_PEER_STATS, len); + SVCMAP(WMI_10_4_SERVICE_MESH_11S, + WMI_SERVICE_MESH_11S, len); + SVCMAP(WMI_10_4_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, + WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, len); + SVCMAP(WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY, + WMI_SERVICE_TX_MODE_PUSH_ONLY, len); + SVCMAP(WMI_10_4_SERVICE_TX_MODE_PUSH_PULL, + WMI_SERVICE_TX_MODE_PUSH_PULL, len); + SVCMAP(WMI_10_4_SERVICE_TX_MODE_DYNAMIC, + WMI_SERVICE_TX_MODE_DYNAMIC, len); + SVCMAP(WMI_10_4_SERVICE_VDEV_RX_FILTER, + WMI_SERVICE_VDEV_RX_FILTER, len); + SVCMAP(WMI_10_4_SERVICE_BTCOEX, + WMI_SERVICE_BTCOEX, len); + SVCMAP(WMI_10_4_SERVICE_CHECK_CAL_VERSION, + WMI_SERVICE_CHECK_CAL_VERSION, len); + SVCMAP(WMI_10_4_SERVICE_DBGLOG_WARN2, + WMI_SERVICE_DBGLOG_WARN2, len); + SVCMAP(WMI_10_4_SERVICE_BTCOEX_DUTY_CYCLE, + WMI_SERVICE_BTCOEX_DUTY_CYCLE, len); + SVCMAP(WMI_10_4_SERVICE_4_WIRE_COEX_SUPPORT, + WMI_SERVICE_4_WIRE_COEX_SUPPORT, len); + SVCMAP(WMI_10_4_SERVICE_EXTENDED_NSS_SUPPORT, + WMI_SERVICE_EXTENDED_NSS_SUPPORT, len); + SVCMAP(WMI_10_4_SERVICE_PROG_GPIO_BAND_SELECT, + WMI_SERVICE_PROG_GPIO_BAND_SELECT, len); + SVCMAP(WMI_10_4_SERVICE_SMART_LOGGING_SUPPORT, + WMI_SERVICE_SMART_LOGGING_SUPPORT, len); + SVCMAP(WMI_10_4_SERVICE_TDLS, + WMI_SERVICE_TDLS, len); + SVCMAP(WMI_10_4_SERVICE_TDLS_OFFCHAN, + WMI_SERVICE_TDLS_OFFCHAN, len); + SVCMAP(WMI_10_4_SERVICE_TDLS_UAPSD_BUFFER_STA, + WMI_SERVICE_TDLS_UAPSD_BUFFER_STA, len); + SVCMAP(WMI_10_4_SERVICE_TDLS_UAPSD_SLEEP_STA, + WMI_SERVICE_TDLS_UAPSD_SLEEP_STA, len); + SVCMAP(WMI_10_4_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, + WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, len); + SVCMAP(WMI_10_4_SERVICE_TDLS_EXPLICIT_MODE_ONLY, + WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY, len); + SVCMAP(WMI_10_4_SERVICE_TDLS_WIDER_BANDWIDTH, + WMI_SERVICE_TDLS_WIDER_BANDWIDTH, len); + SVCMAP(WMI_10_4_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, + WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, len); + SVCMAP(WMI_10_4_SERVICE_HOST_DFS_CHECK_SUPPORT, + WMI_SERVICE_HOST_DFS_CHECK_SUPPORT, len); + SVCMAP(WMI_10_4_SERVICE_TPC_STATS_FINAL, + WMI_SERVICE_TPC_STATS_FINAL, len); + SVCMAP(WMI_10_4_SERVICE_TX_DATA_ACK_RSSI, + WMI_SERVICE_TX_DATA_ACK_RSSI, len); + SVCMAP(WMI_10_4_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT, + WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT, len); + SVCMAP(WMI_10_4_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT, + WMI_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT, len); + SVCMAP(WMI_10_4_SERVICE_RTT_RESPONDER_ROLE, + WMI_SERVICE_RTT_RESPONDER_ROLE, len); + SVCMAP(WMI_10_4_SERVICE_PER_PACKET_SW_ENCRYPT, + WMI_SERVICE_PER_PACKET_SW_ENCRYPT, len); + SVCMAP(WMI_10_4_SERVICE_REPORT_AIRTIME, + WMI_SERVICE_REPORT_AIRTIME, len); + SVCMAP(WMI_10_4_SERVICE_TX_PWR_PER_PEER, + WMI_SERVICE_TX_PWR_PER_PEER, len); + SVCMAP(WMI_10_4_SERVICE_RESET_CHIP, + WMI_SERVICE_RESET_CHIP, len); + SVCMAP(WMI_10_4_SERVICE_PEER_TID_CONFIGS_SUPPORT, + WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT, len); + SVCMAP(WMI_10_4_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT, + WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT, len); +} + +#undef SVCMAP + +/* 2 word representation of MAC addr */ +struct wmi_mac_addr { + union { + u8 addr[6]; + struct { + u32 word0; + u32 word1; + } __packed; + } __packed; +} __packed; + +struct wmi_cmd_map { + u32 init_cmdid; + u32 start_scan_cmdid; + u32 stop_scan_cmdid; + u32 scan_chan_list_cmdid; + u32 scan_sch_prio_tbl_cmdid; + u32 scan_prob_req_oui_cmdid; + u32 pdev_set_regdomain_cmdid; + u32 pdev_set_channel_cmdid; + u32 pdev_set_param_cmdid; + u32 pdev_pktlog_enable_cmdid; + u32 pdev_pktlog_disable_cmdid; + u32 pdev_set_wmm_params_cmdid; + u32 pdev_set_ht_cap_ie_cmdid; + u32 pdev_set_vht_cap_ie_cmdid; + u32 pdev_set_dscp_tid_map_cmdid; + u32 pdev_set_quiet_mode_cmdid; + u32 pdev_green_ap_ps_enable_cmdid; + u32 pdev_get_tpc_config_cmdid; + u32 pdev_set_base_macaddr_cmdid; + u32 vdev_create_cmdid; + u32 vdev_delete_cmdid; + u32 vdev_start_request_cmdid; + u32 vdev_restart_request_cmdid; + u32 vdev_up_cmdid; + u32 vdev_stop_cmdid; + u32 vdev_down_cmdid; + u32 vdev_set_param_cmdid; + u32 vdev_install_key_cmdid; + u32 peer_create_cmdid; + u32 peer_delete_cmdid; + u32 peer_flush_tids_cmdid; + u32 peer_set_param_cmdid; + u32 peer_assoc_cmdid; + u32 peer_add_wds_entry_cmdid; + u32 peer_remove_wds_entry_cmdid; + u32 peer_mcast_group_cmdid; + u32 bcn_tx_cmdid; + u32 pdev_send_bcn_cmdid; + u32 bcn_tmpl_cmdid; + u32 bcn_filter_rx_cmdid; + u32 prb_req_filter_rx_cmdid; + u32 mgmt_tx_cmdid; + u32 mgmt_tx_send_cmdid; + u32 prb_tmpl_cmdid; + u32 addba_clear_resp_cmdid; + u32 addba_send_cmdid; + u32 addba_status_cmdid; + u32 delba_send_cmdid; + u32 addba_set_resp_cmdid; + u32 send_singleamsdu_cmdid; + u32 sta_powersave_mode_cmdid; + u32 sta_powersave_param_cmdid; + u32 sta_mimo_ps_mode_cmdid; + u32 pdev_dfs_enable_cmdid; + u32 pdev_dfs_disable_cmdid; + u32 roam_scan_mode; + u32 roam_scan_rssi_threshold; + u32 roam_scan_period; + u32 roam_scan_rssi_change_threshold; + u32 roam_ap_profile; + u32 ofl_scan_add_ap_profile; + u32 ofl_scan_remove_ap_profile; + u32 ofl_scan_period; + u32 p2p_dev_set_device_info; + u32 p2p_dev_set_discoverability; + u32 p2p_go_set_beacon_ie; + u32 p2p_go_set_probe_resp_ie; + u32 p2p_set_vendor_ie_data_cmdid; + u32 ap_ps_peer_param_cmdid; + u32 ap_ps_peer_uapsd_coex_cmdid; + u32 peer_rate_retry_sched_cmdid; + u32 wlan_profile_trigger_cmdid; + u32 wlan_profile_set_hist_intvl_cmdid; + u32 wlan_profile_get_profile_data_cmdid; + u32 wlan_profile_enable_profile_id_cmdid; + u32 wlan_profile_list_profile_id_cmdid; + u32 pdev_suspend_cmdid; + u32 pdev_resume_cmdid; + u32 add_bcn_filter_cmdid; + u32 rmv_bcn_filter_cmdid; + u32 wow_add_wake_pattern_cmdid; + u32 wow_del_wake_pattern_cmdid; + u32 wow_enable_disable_wake_event_cmdid; + u32 wow_enable_cmdid; + u32 wow_hostwakeup_from_sleep_cmdid; + u32 rtt_measreq_cmdid; + u32 rtt_tsf_cmdid; + u32 vdev_spectral_scan_configure_cmdid; + u32 vdev_spectral_scan_enable_cmdid; + u32 request_stats_cmdid; + u32 request_peer_stats_info_cmdid; + u32 set_arp_ns_offload_cmdid; + u32 network_list_offload_config_cmdid; + u32 gtk_offload_cmdid; + u32 csa_offload_enable_cmdid; + u32 csa_offload_chanswitch_cmdid; + u32 chatter_set_mode_cmdid; + u32 peer_tid_addba_cmdid; + u32 peer_tid_delba_cmdid; + u32 sta_dtim_ps_method_cmdid; + u32 sta_uapsd_auto_trig_cmdid; + u32 sta_keepalive_cmd; + u32 echo_cmdid; + u32 pdev_utf_cmdid; + u32 dbglog_cfg_cmdid; + u32 pdev_qvit_cmdid; + u32 pdev_ftm_intg_cmdid; + u32 vdev_set_keepalive_cmdid; + u32 vdev_get_keepalive_cmdid; + u32 force_fw_hang_cmdid; + u32 gpio_config_cmdid; + u32 gpio_output_cmdid; + u32 pdev_get_temperature_cmdid; + u32 vdev_set_wmm_params_cmdid; + u32 tdls_set_state_cmdid; + u32 tdls_peer_update_cmdid; + u32 adaptive_qcs_cmdid; + u32 scan_update_request_cmdid; + u32 vdev_standby_response_cmdid; + u32 vdev_resume_response_cmdid; + u32 wlan_peer_caching_add_peer_cmdid; + u32 wlan_peer_caching_evict_peer_cmdid; + u32 wlan_peer_caching_restore_peer_cmdid; + u32 wlan_peer_caching_print_all_peers_info_cmdid; + u32 peer_update_wds_entry_cmdid; + u32 peer_add_proxy_sta_entry_cmdid; + u32 rtt_keepalive_cmdid; + u32 oem_req_cmdid; + u32 nan_cmdid; + u32 vdev_ratemask_cmdid; + u32 qboost_cfg_cmdid; + u32 pdev_smart_ant_enable_cmdid; + u32 pdev_smart_ant_set_rx_antenna_cmdid; + u32 peer_smart_ant_set_tx_antenna_cmdid; + u32 peer_smart_ant_set_train_info_cmdid; + u32 peer_smart_ant_set_node_config_ops_cmdid; + u32 pdev_set_antenna_switch_table_cmdid; + u32 pdev_set_ctl_table_cmdid; + u32 pdev_set_mimogain_table_cmdid; + u32 pdev_ratepwr_table_cmdid; + u32 pdev_ratepwr_chainmsk_table_cmdid; + u32 pdev_fips_cmdid; + u32 tt_set_conf_cmdid; + u32 fwtest_cmdid; + u32 vdev_atf_request_cmdid; + u32 peer_atf_request_cmdid; + u32 pdev_get_ani_cck_config_cmdid; + u32 pdev_get_ani_ofdm_config_cmdid; + u32 pdev_reserve_ast_entry_cmdid; + u32 pdev_get_nfcal_power_cmdid; + u32 pdev_get_tpc_cmdid; + u32 pdev_get_ast_info_cmdid; + u32 vdev_set_dscp_tid_map_cmdid; + u32 pdev_get_info_cmdid; + u32 vdev_get_info_cmdid; + u32 vdev_filter_neighbor_rx_packets_cmdid; + u32 mu_cal_start_cmdid; + u32 set_cca_params_cmdid; + u32 pdev_bss_chan_info_request_cmdid; + u32 pdev_enable_adaptive_cca_cmdid; + u32 ext_resource_cfg_cmdid; + u32 vdev_set_ie_cmdid; + u32 set_lteu_config_cmdid; + u32 atf_ssid_grouping_request_cmdid; + u32 peer_atf_ext_request_cmdid; + u32 set_periodic_channel_stats_cfg_cmdid; + u32 peer_bwf_request_cmdid; + u32 btcoex_cfg_cmdid; + u32 peer_tx_mu_txmit_count_cmdid; + u32 peer_tx_mu_txmit_rstcnt_cmdid; + u32 peer_gid_userpos_list_cmdid; + u32 pdev_check_cal_version_cmdid; + u32 coex_version_cfg_cmid; + u32 pdev_get_rx_filter_cmdid; + u32 pdev_extended_nss_cfg_cmdid; + u32 vdev_set_scan_nac_rssi_cmdid; + u32 prog_gpio_band_select_cmdid; + u32 config_smart_logging_cmdid; + u32 debug_fatal_condition_cmdid; + u32 get_tsf_timer_cmdid; + u32 pdev_get_tpc_table_cmdid; + u32 vdev_sifs_trigger_time_cmdid; + u32 pdev_wds_entry_list_cmdid; + u32 tdls_set_offchan_mode_cmdid; + u32 radar_found_cmdid; + u32 set_bb_timing_cmdid; + u32 per_peer_per_tid_config_cmdid; +}; + +/* + * wmi command groups. + */ +enum wmi_cmd_group { + /* 0 to 2 are reserved */ + WMI_GRP_START = 0x3, + WMI_GRP_SCAN = WMI_GRP_START, + WMI_GRP_PDEV, + WMI_GRP_VDEV, + WMI_GRP_PEER, + WMI_GRP_MGMT, + WMI_GRP_BA_NEG, + WMI_GRP_STA_PS, + WMI_GRP_DFS, + WMI_GRP_ROAM, + WMI_GRP_OFL_SCAN, + WMI_GRP_P2P, + WMI_GRP_AP_PS, + WMI_GRP_RATE_CTRL, + WMI_GRP_PROFILE, + WMI_GRP_SUSPEND, + WMI_GRP_BCN_FILTER, + WMI_GRP_WOW, + WMI_GRP_RTT, + WMI_GRP_SPECTRAL, + WMI_GRP_STATS, + WMI_GRP_ARP_NS_OFL, + WMI_GRP_NLO_OFL, + WMI_GRP_GTK_OFL, + WMI_GRP_CSA_OFL, + WMI_GRP_CHATTER, + WMI_GRP_TID_ADDBA, + WMI_GRP_MISC, + WMI_GRP_GPIO, +}; + +#define WMI_CMD_GRP(grp_id) (((grp_id) << 12) | 0x1) +#define WMI_EVT_GRP_START_ID(grp_id) (((grp_id) << 12) | 0x1) + +#define WMI_CMD_UNSUPPORTED 0 + +/* Command IDs and command events for MAIN FW. */ +enum wmi_cmd_id { + WMI_INIT_CMDID = 0x1, + + /* Scan specific commands */ + WMI_START_SCAN_CMDID = WMI_CMD_GRP(WMI_GRP_SCAN), + WMI_STOP_SCAN_CMDID, + WMI_SCAN_CHAN_LIST_CMDID, + WMI_SCAN_SCH_PRIO_TBL_CMDID, + + /* PDEV (physical device) specific commands */ + WMI_PDEV_SET_REGDOMAIN_CMDID = WMI_CMD_GRP(WMI_GRP_PDEV), + WMI_PDEV_SET_CHANNEL_CMDID, + WMI_PDEV_SET_PARAM_CMDID, + WMI_PDEV_PKTLOG_ENABLE_CMDID, + WMI_PDEV_PKTLOG_DISABLE_CMDID, + WMI_PDEV_SET_WMM_PARAMS_CMDID, + WMI_PDEV_SET_HT_CAP_IE_CMDID, + WMI_PDEV_SET_VHT_CAP_IE_CMDID, + WMI_PDEV_SET_DSCP_TID_MAP_CMDID, + WMI_PDEV_SET_QUIET_MODE_CMDID, + WMI_PDEV_GREEN_AP_PS_ENABLE_CMDID, + WMI_PDEV_GET_TPC_CONFIG_CMDID, + WMI_PDEV_SET_BASE_MACADDR_CMDID, + + /* VDEV (virtual device) specific commands */ + WMI_VDEV_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_VDEV), + WMI_VDEV_DELETE_CMDID, + WMI_VDEV_START_REQUEST_CMDID, + WMI_VDEV_RESTART_REQUEST_CMDID, + WMI_VDEV_UP_CMDID, + WMI_VDEV_STOP_CMDID, + WMI_VDEV_DOWN_CMDID, + WMI_VDEV_SET_PARAM_CMDID, + WMI_VDEV_INSTALL_KEY_CMDID, + + /* peer specific commands */ + WMI_PEER_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_PEER), + WMI_PEER_DELETE_CMDID, + WMI_PEER_FLUSH_TIDS_CMDID, + WMI_PEER_SET_PARAM_CMDID, + WMI_PEER_ASSOC_CMDID, + WMI_PEER_ADD_WDS_ENTRY_CMDID, + WMI_PEER_REMOVE_WDS_ENTRY_CMDID, + WMI_PEER_MCAST_GROUP_CMDID, + + /* beacon/management specific commands */ + WMI_BCN_TX_CMDID = WMI_CMD_GRP(WMI_GRP_MGMT), + WMI_PDEV_SEND_BCN_CMDID, + WMI_BCN_TMPL_CMDID, + WMI_BCN_FILTER_RX_CMDID, + WMI_PRB_REQ_FILTER_RX_CMDID, + WMI_MGMT_TX_CMDID, + WMI_PRB_TMPL_CMDID, + + /* commands to directly control BA negotiation directly from host. */ + WMI_ADDBA_CLEAR_RESP_CMDID = WMI_CMD_GRP(WMI_GRP_BA_NEG), + WMI_ADDBA_SEND_CMDID, + WMI_ADDBA_STATUS_CMDID, + WMI_DELBA_SEND_CMDID, + WMI_ADDBA_SET_RESP_CMDID, + WMI_SEND_SINGLEAMSDU_CMDID, + + /* Station power save specific config */ + WMI_STA_POWERSAVE_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_STA_PS), + WMI_STA_POWERSAVE_PARAM_CMDID, + WMI_STA_MIMO_PS_MODE_CMDID, + + /** DFS-specific commands */ + WMI_PDEV_DFS_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_DFS), + WMI_PDEV_DFS_DISABLE_CMDID, + + /* Roaming specific commands */ + WMI_ROAM_SCAN_MODE = WMI_CMD_GRP(WMI_GRP_ROAM), + WMI_ROAM_SCAN_RSSI_THRESHOLD, + WMI_ROAM_SCAN_PERIOD, + WMI_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, + WMI_ROAM_AP_PROFILE, + + /* offload scan specific commands */ + WMI_OFL_SCAN_ADD_AP_PROFILE = WMI_CMD_GRP(WMI_GRP_OFL_SCAN), + WMI_OFL_SCAN_REMOVE_AP_PROFILE, + WMI_OFL_SCAN_PERIOD, + + /* P2P specific commands */ + WMI_P2P_DEV_SET_DEVICE_INFO = WMI_CMD_GRP(WMI_GRP_P2P), + WMI_P2P_DEV_SET_DISCOVERABILITY, + WMI_P2P_GO_SET_BEACON_IE, + WMI_P2P_GO_SET_PROBE_RESP_IE, + WMI_P2P_SET_VENDOR_IE_DATA_CMDID, + + /* AP power save specific config */ + WMI_AP_PS_PEER_PARAM_CMDID = WMI_CMD_GRP(WMI_GRP_AP_PS), + WMI_AP_PS_PEER_UAPSD_COEX_CMDID, + + /* Rate-control specific commands */ + WMI_PEER_RATE_RETRY_SCHED_CMDID = + WMI_CMD_GRP(WMI_GRP_RATE_CTRL), + + /* WLAN Profiling commands. */ + WMI_WLAN_PROFILE_TRIGGER_CMDID = WMI_CMD_GRP(WMI_GRP_PROFILE), + WMI_WLAN_PROFILE_SET_HIST_INTVL_CMDID, + WMI_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, + WMI_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, + WMI_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, + + /* Suspend resume command Ids */ + WMI_PDEV_SUSPEND_CMDID = WMI_CMD_GRP(WMI_GRP_SUSPEND), + WMI_PDEV_RESUME_CMDID, + + /* Beacon filter commands */ + WMI_ADD_BCN_FILTER_CMDID = WMI_CMD_GRP(WMI_GRP_BCN_FILTER), + WMI_RMV_BCN_FILTER_CMDID, + + /* WOW Specific WMI commands*/ + WMI_WOW_ADD_WAKE_PATTERN_CMDID = WMI_CMD_GRP(WMI_GRP_WOW), + WMI_WOW_DEL_WAKE_PATTERN_CMDID, + WMI_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, + WMI_WOW_ENABLE_CMDID, + WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, + + /* RTT measurement related cmd */ + WMI_RTT_MEASREQ_CMDID = WMI_CMD_GRP(WMI_GRP_RTT), + WMI_RTT_TSF_CMDID, + + /* spectral scan commands */ + WMI_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID = WMI_CMD_GRP(WMI_GRP_SPECTRAL), + WMI_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, + + /* F/W stats */ + WMI_REQUEST_STATS_CMDID = WMI_CMD_GRP(WMI_GRP_STATS), + + /* ARP OFFLOAD REQUEST*/ + WMI_SET_ARP_NS_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_ARP_NS_OFL), + + /* NS offload confid*/ + WMI_NETWORK_LIST_OFFLOAD_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_NLO_OFL), + + /* GTK offload Specific WMI commands*/ + WMI_GTK_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_GTK_OFL), + + /* CSA offload Specific WMI commands*/ + WMI_CSA_OFFLOAD_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_CSA_OFL), + WMI_CSA_OFFLOAD_CHANSWITCH_CMDID, + + /* Chatter commands*/ + WMI_CHATTER_SET_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_CHATTER), + + /* addba specific commands */ + WMI_PEER_TID_ADDBA_CMDID = WMI_CMD_GRP(WMI_GRP_TID_ADDBA), + WMI_PEER_TID_DELBA_CMDID, + + /* set station mimo powersave method */ + WMI_STA_DTIM_PS_METHOD_CMDID, + /* Configure the Station UAPSD AC Auto Trigger Parameters */ + WMI_STA_UAPSD_AUTO_TRIG_CMDID, + + /* STA Keep alive parameter configuration, + * Requires WMI_SERVICE_STA_KEEP_ALIVE + */ + WMI_STA_KEEPALIVE_CMD, + + /* misc command group */ + WMI_ECHO_CMDID = WMI_CMD_GRP(WMI_GRP_MISC), + WMI_PDEV_UTF_CMDID, + WMI_DBGLOG_CFG_CMDID, + WMI_PDEV_QVIT_CMDID, + WMI_PDEV_FTM_INTG_CMDID, + WMI_VDEV_SET_KEEPALIVE_CMDID, + WMI_VDEV_GET_KEEPALIVE_CMDID, + WMI_FORCE_FW_HANG_CMDID, + + /* GPIO Configuration */ + WMI_GPIO_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_GPIO), + WMI_GPIO_OUTPUT_CMDID, +}; + +enum wmi_event_id { + WMI_SERVICE_READY_EVENTID = 0x1, + WMI_READY_EVENTID, + WMI_SERVICE_AVAILABLE_EVENTID, + + /* Scan specific events */ + WMI_SCAN_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_SCAN), + + /* PDEV specific events */ + WMI_PDEV_TPC_CONFIG_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PDEV), + WMI_CHAN_INFO_EVENTID, + WMI_PHYERR_EVENTID, + + /* VDEV specific events */ + WMI_VDEV_START_RESP_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_VDEV), + WMI_VDEV_STOPPED_EVENTID, + WMI_VDEV_INSTALL_KEY_COMPLETE_EVENTID, + + /* peer specific events */ + WMI_PEER_STA_KICKOUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PEER), + + /* beacon/mgmt specific events */ + WMI_MGMT_RX_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MGMT), + WMI_HOST_SWBA_EVENTID, + WMI_TBTTOFFSET_UPDATE_EVENTID, + + /* ADDBA Related WMI Events*/ + WMI_TX_DELBA_COMPLETE_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_BA_NEG), + WMI_TX_ADDBA_COMPLETE_EVENTID, + + /* Roam event to trigger roaming on host */ + WMI_ROAM_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_ROAM), + WMI_PROFILE_MATCH, + + /* WoW */ + WMI_WOW_WAKEUP_HOST_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_WOW), + + /* RTT */ + WMI_RTT_MEASUREMENT_REPORT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_RTT), + WMI_TSF_MEASUREMENT_REPORT_EVENTID, + WMI_RTT_ERROR_REPORT_EVENTID, + + /* GTK offload */ + WMI_GTK_OFFLOAD_STATUS_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GTK_OFL), + WMI_GTK_REKEY_FAIL_EVENTID, + + /* CSA IE received event */ + WMI_CSA_HANDLING_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_CSA_OFL), + + /* Misc events */ + WMI_ECHO_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MISC), + WMI_PDEV_UTF_EVENTID, + WMI_DEBUG_MESG_EVENTID, + WMI_UPDATE_STATS_EVENTID, + WMI_DEBUG_PRINT_EVENTID, + WMI_DCS_INTERFERENCE_EVENTID, + WMI_PDEV_QVIT_EVENTID, + WMI_WLAN_PROFILE_DATA_EVENTID, + WMI_PDEV_FTM_INTG_EVENTID, + WMI_WLAN_FREQ_AVOID_EVENTID, + WMI_VDEV_GET_KEEPALIVE_EVENTID, + + /* GPIO Event */ + WMI_GPIO_INPUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GPIO), +}; + +/* Command IDs and command events for 10.X firmware */ +enum wmi_10x_cmd_id { + WMI_10X_START_CMDID = 0x9000, + WMI_10X_END_CMDID = 0x9FFF, + + /* initialize the wlan sub system */ + WMI_10X_INIT_CMDID, + + /* Scan specific commands */ + + WMI_10X_START_SCAN_CMDID = WMI_10X_START_CMDID, + WMI_10X_STOP_SCAN_CMDID, + WMI_10X_SCAN_CHAN_LIST_CMDID, + WMI_10X_ECHO_CMDID, + + /* PDEV(physical device) specific commands */ + WMI_10X_PDEV_SET_REGDOMAIN_CMDID, + WMI_10X_PDEV_SET_CHANNEL_CMDID, + WMI_10X_PDEV_SET_PARAM_CMDID, + WMI_10X_PDEV_PKTLOG_ENABLE_CMDID, + WMI_10X_PDEV_PKTLOG_DISABLE_CMDID, + WMI_10X_PDEV_SET_WMM_PARAMS_CMDID, + WMI_10X_PDEV_SET_HT_CAP_IE_CMDID, + WMI_10X_PDEV_SET_VHT_CAP_IE_CMDID, + WMI_10X_PDEV_SET_BASE_MACADDR_CMDID, + WMI_10X_PDEV_SET_DSCP_TID_MAP_CMDID, + WMI_10X_PDEV_SET_QUIET_MODE_CMDID, + WMI_10X_PDEV_GREEN_AP_PS_ENABLE_CMDID, + WMI_10X_PDEV_GET_TPC_CONFIG_CMDID, + + /* VDEV(virtual device) specific commands */ + WMI_10X_VDEV_CREATE_CMDID, + WMI_10X_VDEV_DELETE_CMDID, + WMI_10X_VDEV_START_REQUEST_CMDID, + WMI_10X_VDEV_RESTART_REQUEST_CMDID, + WMI_10X_VDEV_UP_CMDID, + WMI_10X_VDEV_STOP_CMDID, + WMI_10X_VDEV_DOWN_CMDID, + WMI_10X_VDEV_STANDBY_RESPONSE_CMDID, + WMI_10X_VDEV_RESUME_RESPONSE_CMDID, + WMI_10X_VDEV_SET_PARAM_CMDID, + WMI_10X_VDEV_INSTALL_KEY_CMDID, + + /* peer specific commands */ + WMI_10X_PEER_CREATE_CMDID, + WMI_10X_PEER_DELETE_CMDID, + WMI_10X_PEER_FLUSH_TIDS_CMDID, + WMI_10X_PEER_SET_PARAM_CMDID, + WMI_10X_PEER_ASSOC_CMDID, + WMI_10X_PEER_ADD_WDS_ENTRY_CMDID, + WMI_10X_PEER_REMOVE_WDS_ENTRY_CMDID, + WMI_10X_PEER_MCAST_GROUP_CMDID, + + /* beacon/management specific commands */ + + WMI_10X_BCN_TX_CMDID, + WMI_10X_BCN_PRB_TMPL_CMDID, + WMI_10X_BCN_FILTER_RX_CMDID, + WMI_10X_PRB_REQ_FILTER_RX_CMDID, + WMI_10X_MGMT_TX_CMDID, + + /* commands to directly control ba negotiation directly from host. */ + WMI_10X_ADDBA_CLEAR_RESP_CMDID, + WMI_10X_ADDBA_SEND_CMDID, + WMI_10X_ADDBA_STATUS_CMDID, + WMI_10X_DELBA_SEND_CMDID, + WMI_10X_ADDBA_SET_RESP_CMDID, + WMI_10X_SEND_SINGLEAMSDU_CMDID, + + /* Station power save specific config */ + WMI_10X_STA_POWERSAVE_MODE_CMDID, + WMI_10X_STA_POWERSAVE_PARAM_CMDID, + WMI_10X_STA_MIMO_PS_MODE_CMDID, + + /* set debug log config */ + WMI_10X_DBGLOG_CFG_CMDID, + + /* DFS-specific commands */ + WMI_10X_PDEV_DFS_ENABLE_CMDID, + WMI_10X_PDEV_DFS_DISABLE_CMDID, + + /* QVIT specific command id */ + WMI_10X_PDEV_QVIT_CMDID, + + /* Offload Scan and Roaming related commands */ + WMI_10X_ROAM_SCAN_MODE, + WMI_10X_ROAM_SCAN_RSSI_THRESHOLD, + WMI_10X_ROAM_SCAN_PERIOD, + WMI_10X_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, + WMI_10X_ROAM_AP_PROFILE, + WMI_10X_OFL_SCAN_ADD_AP_PROFILE, + WMI_10X_OFL_SCAN_REMOVE_AP_PROFILE, + WMI_10X_OFL_SCAN_PERIOD, + + /* P2P specific commands */ + WMI_10X_P2P_DEV_SET_DEVICE_INFO, + WMI_10X_P2P_DEV_SET_DISCOVERABILITY, + WMI_10X_P2P_GO_SET_BEACON_IE, + WMI_10X_P2P_GO_SET_PROBE_RESP_IE, + + /* AP power save specific config */ + WMI_10X_AP_PS_PEER_PARAM_CMDID, + WMI_10X_AP_PS_PEER_UAPSD_COEX_CMDID, + + /* Rate-control specific commands */ + WMI_10X_PEER_RATE_RETRY_SCHED_CMDID, + + /* WLAN Profiling commands. */ + WMI_10X_WLAN_PROFILE_TRIGGER_CMDID, + WMI_10X_WLAN_PROFILE_SET_HIST_INTVL_CMDID, + WMI_10X_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, + WMI_10X_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, + WMI_10X_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, + + /* Suspend resume command Ids */ + WMI_10X_PDEV_SUSPEND_CMDID, + WMI_10X_PDEV_RESUME_CMDID, + + /* Beacon filter commands */ + WMI_10X_ADD_BCN_FILTER_CMDID, + WMI_10X_RMV_BCN_FILTER_CMDID, + + /* WOW Specific WMI commands*/ + WMI_10X_WOW_ADD_WAKE_PATTERN_CMDID, + WMI_10X_WOW_DEL_WAKE_PATTERN_CMDID, + WMI_10X_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, + WMI_10X_WOW_ENABLE_CMDID, + WMI_10X_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, + + /* RTT measurement related cmd */ + WMI_10X_RTT_MEASREQ_CMDID, + WMI_10X_RTT_TSF_CMDID, + + /* transmit beacon by value */ + WMI_10X_PDEV_SEND_BCN_CMDID, + + /* F/W stats */ + WMI_10X_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID, + WMI_10X_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, + WMI_10X_REQUEST_STATS_CMDID, + + /* GPIO Configuration */ + WMI_10X_GPIO_CONFIG_CMDID, + WMI_10X_GPIO_OUTPUT_CMDID, + + WMI_10X_PDEV_UTF_CMDID = WMI_10X_END_CMDID - 1, +}; + +enum wmi_10x_event_id { + WMI_10X_SERVICE_READY_EVENTID = 0x8000, + WMI_10X_READY_EVENTID, + WMI_10X_START_EVENTID = 0x9000, + WMI_10X_END_EVENTID = 0x9FFF, + + /* Scan specific events */ + WMI_10X_SCAN_EVENTID = WMI_10X_START_EVENTID, + WMI_10X_ECHO_EVENTID, + WMI_10X_DEBUG_MESG_EVENTID, + WMI_10X_UPDATE_STATS_EVENTID, + + /* Instantaneous RSSI event */ + WMI_10X_INST_RSSI_STATS_EVENTID, + + /* VDEV specific events */ + WMI_10X_VDEV_START_RESP_EVENTID, + WMI_10X_VDEV_STANDBY_REQ_EVENTID, + WMI_10X_VDEV_RESUME_REQ_EVENTID, + WMI_10X_VDEV_STOPPED_EVENTID, + + /* peer specific events */ + WMI_10X_PEER_STA_KICKOUT_EVENTID, + + /* beacon/mgmt specific events */ + WMI_10X_HOST_SWBA_EVENTID, + WMI_10X_TBTTOFFSET_UPDATE_EVENTID, + WMI_10X_MGMT_RX_EVENTID, + + /* Channel stats event */ + WMI_10X_CHAN_INFO_EVENTID, + + /* PHY Error specific WMI event */ + WMI_10X_PHYERR_EVENTID, + + /* Roam event to trigger roaming on host */ + WMI_10X_ROAM_EVENTID, + + /* matching AP found from list of profiles */ + WMI_10X_PROFILE_MATCH, + + /* debug print message used for tracing FW code while debugging */ + WMI_10X_DEBUG_PRINT_EVENTID, + /* VI spoecific event */ + WMI_10X_PDEV_QVIT_EVENTID, + /* FW code profile data in response to profile request */ + WMI_10X_WLAN_PROFILE_DATA_EVENTID, + + /*RTT related event ID*/ + WMI_10X_RTT_MEASUREMENT_REPORT_EVENTID, + WMI_10X_TSF_MEASUREMENT_REPORT_EVENTID, + WMI_10X_RTT_ERROR_REPORT_EVENTID, + + WMI_10X_WOW_WAKEUP_HOST_EVENTID, + WMI_10X_DCS_INTERFERENCE_EVENTID, + + /* TPC config for the current operating channel */ + WMI_10X_PDEV_TPC_CONFIG_EVENTID, + + WMI_10X_GPIO_INPUT_EVENTID, + WMI_10X_PDEV_UTF_EVENTID = WMI_10X_END_EVENTID - 1, +}; + +enum wmi_10_2_cmd_id { + WMI_10_2_START_CMDID = 0x9000, + WMI_10_2_END_CMDID = 0x9FFF, + WMI_10_2_INIT_CMDID, + WMI_10_2_START_SCAN_CMDID = WMI_10_2_START_CMDID, + WMI_10_2_STOP_SCAN_CMDID, + WMI_10_2_SCAN_CHAN_LIST_CMDID, + WMI_10_2_ECHO_CMDID, + WMI_10_2_PDEV_SET_REGDOMAIN_CMDID, + WMI_10_2_PDEV_SET_CHANNEL_CMDID, + WMI_10_2_PDEV_SET_PARAM_CMDID, + WMI_10_2_PDEV_PKTLOG_ENABLE_CMDID, + WMI_10_2_PDEV_PKTLOG_DISABLE_CMDID, + WMI_10_2_PDEV_SET_WMM_PARAMS_CMDID, + WMI_10_2_PDEV_SET_HT_CAP_IE_CMDID, + WMI_10_2_PDEV_SET_VHT_CAP_IE_CMDID, + WMI_10_2_PDEV_SET_BASE_MACADDR_CMDID, + WMI_10_2_PDEV_SET_QUIET_MODE_CMDID, + WMI_10_2_PDEV_GREEN_AP_PS_ENABLE_CMDID, + WMI_10_2_PDEV_GET_TPC_CONFIG_CMDID, + WMI_10_2_VDEV_CREATE_CMDID, + WMI_10_2_VDEV_DELETE_CMDID, + WMI_10_2_VDEV_START_REQUEST_CMDID, + WMI_10_2_VDEV_RESTART_REQUEST_CMDID, + WMI_10_2_VDEV_UP_CMDID, + WMI_10_2_VDEV_STOP_CMDID, + WMI_10_2_VDEV_DOWN_CMDID, + WMI_10_2_VDEV_STANDBY_RESPONSE_CMDID, + WMI_10_2_VDEV_RESUME_RESPONSE_CMDID, + WMI_10_2_VDEV_SET_PARAM_CMDID, + WMI_10_2_VDEV_INSTALL_KEY_CMDID, + WMI_10_2_VDEV_SET_DSCP_TID_MAP_CMDID, + WMI_10_2_PEER_CREATE_CMDID, + WMI_10_2_PEER_DELETE_CMDID, + WMI_10_2_PEER_FLUSH_TIDS_CMDID, + WMI_10_2_PEER_SET_PARAM_CMDID, + WMI_10_2_PEER_ASSOC_CMDID, + WMI_10_2_PEER_ADD_WDS_ENTRY_CMDID, + WMI_10_2_PEER_UPDATE_WDS_ENTRY_CMDID, + WMI_10_2_PEER_REMOVE_WDS_ENTRY_CMDID, + WMI_10_2_PEER_MCAST_GROUP_CMDID, + WMI_10_2_BCN_TX_CMDID, + WMI_10_2_BCN_PRB_TMPL_CMDID, + WMI_10_2_BCN_FILTER_RX_CMDID, + WMI_10_2_PRB_REQ_FILTER_RX_CMDID, + WMI_10_2_MGMT_TX_CMDID, + WMI_10_2_ADDBA_CLEAR_RESP_CMDID, + WMI_10_2_ADDBA_SEND_CMDID, + WMI_10_2_ADDBA_STATUS_CMDID, + WMI_10_2_DELBA_SEND_CMDID, + WMI_10_2_ADDBA_SET_RESP_CMDID, + WMI_10_2_SEND_SINGLEAMSDU_CMDID, + WMI_10_2_STA_POWERSAVE_MODE_CMDID, + WMI_10_2_STA_POWERSAVE_PARAM_CMDID, + WMI_10_2_STA_MIMO_PS_MODE_CMDID, + WMI_10_2_DBGLOG_CFG_CMDID, + WMI_10_2_PDEV_DFS_ENABLE_CMDID, + WMI_10_2_PDEV_DFS_DISABLE_CMDID, + WMI_10_2_PDEV_QVIT_CMDID, + WMI_10_2_ROAM_SCAN_MODE, + WMI_10_2_ROAM_SCAN_RSSI_THRESHOLD, + WMI_10_2_ROAM_SCAN_PERIOD, + WMI_10_2_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, + WMI_10_2_ROAM_AP_PROFILE, + WMI_10_2_OFL_SCAN_ADD_AP_PROFILE, + WMI_10_2_OFL_SCAN_REMOVE_AP_PROFILE, + WMI_10_2_OFL_SCAN_PERIOD, + WMI_10_2_P2P_DEV_SET_DEVICE_INFO, + WMI_10_2_P2P_DEV_SET_DISCOVERABILITY, + WMI_10_2_P2P_GO_SET_BEACON_IE, + WMI_10_2_P2P_GO_SET_PROBE_RESP_IE, + WMI_10_2_AP_PS_PEER_PARAM_CMDID, + WMI_10_2_AP_PS_PEER_UAPSD_COEX_CMDID, + WMI_10_2_PEER_RATE_RETRY_SCHED_CMDID, + WMI_10_2_WLAN_PROFILE_TRIGGER_CMDID, + WMI_10_2_WLAN_PROFILE_SET_HIST_INTVL_CMDID, + WMI_10_2_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, + WMI_10_2_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, + WMI_10_2_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, + WMI_10_2_PDEV_SUSPEND_CMDID, + WMI_10_2_PDEV_RESUME_CMDID, + WMI_10_2_ADD_BCN_FILTER_CMDID, + WMI_10_2_RMV_BCN_FILTER_CMDID, + WMI_10_2_WOW_ADD_WAKE_PATTERN_CMDID, + WMI_10_2_WOW_DEL_WAKE_PATTERN_CMDID, + WMI_10_2_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, + WMI_10_2_WOW_ENABLE_CMDID, + WMI_10_2_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, + WMI_10_2_RTT_MEASREQ_CMDID, + WMI_10_2_RTT_TSF_CMDID, + WMI_10_2_RTT_KEEPALIVE_CMDID, + WMI_10_2_PDEV_SEND_BCN_CMDID, + WMI_10_2_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID, + WMI_10_2_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, + WMI_10_2_REQUEST_STATS_CMDID, + WMI_10_2_GPIO_CONFIG_CMDID, + WMI_10_2_GPIO_OUTPUT_CMDID, + WMI_10_2_VDEV_RATEMASK_CMDID, + WMI_10_2_PDEV_SMART_ANT_ENABLE_CMDID, + WMI_10_2_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID, + WMI_10_2_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID, + WMI_10_2_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID, + WMI_10_2_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID, + WMI_10_2_FORCE_FW_HANG_CMDID, + WMI_10_2_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID, + WMI_10_2_PDEV_SET_CTL_TABLE_CMDID, + WMI_10_2_PDEV_SET_MIMOGAIN_TABLE_CMDID, + WMI_10_2_PDEV_RATEPWR_TABLE_CMDID, + WMI_10_2_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID, + WMI_10_2_PDEV_GET_INFO, + WMI_10_2_VDEV_GET_INFO, + WMI_10_2_VDEV_ATF_REQUEST_CMDID, + WMI_10_2_PEER_ATF_REQUEST_CMDID, + WMI_10_2_PDEV_GET_TEMPERATURE_CMDID, + WMI_10_2_MU_CAL_START_CMDID, + WMI_10_2_SET_LTEU_CONFIG_CMDID, + WMI_10_2_SET_CCA_PARAMS, + WMI_10_2_PDEV_BSS_CHAN_INFO_REQUEST_CMDID, + WMI_10_2_FWTEST_CMDID, + WMI_10_2_PDEV_SET_BB_TIMING_CONFIG_CMDID, + WMI_10_2_PDEV_UTF_CMDID = WMI_10_2_END_CMDID - 1, +}; + +enum wmi_10_2_event_id { + WMI_10_2_SERVICE_READY_EVENTID = 0x8000, + WMI_10_2_READY_EVENTID, + WMI_10_2_DEBUG_MESG_EVENTID, + WMI_10_2_START_EVENTID = 0x9000, + WMI_10_2_END_EVENTID = 0x9FFF, + WMI_10_2_SCAN_EVENTID = WMI_10_2_START_EVENTID, + WMI_10_2_ECHO_EVENTID, + WMI_10_2_UPDATE_STATS_EVENTID, + WMI_10_2_INST_RSSI_STATS_EVENTID, + WMI_10_2_VDEV_START_RESP_EVENTID, + WMI_10_2_VDEV_STANDBY_REQ_EVENTID, + WMI_10_2_VDEV_RESUME_REQ_EVENTID, + WMI_10_2_VDEV_STOPPED_EVENTID, + WMI_10_2_PEER_STA_KICKOUT_EVENTID, + WMI_10_2_HOST_SWBA_EVENTID, + WMI_10_2_TBTTOFFSET_UPDATE_EVENTID, + WMI_10_2_MGMT_RX_EVENTID, + WMI_10_2_CHAN_INFO_EVENTID, + WMI_10_2_PHYERR_EVENTID, + WMI_10_2_ROAM_EVENTID, + WMI_10_2_PROFILE_MATCH, + WMI_10_2_DEBUG_PRINT_EVENTID, + WMI_10_2_PDEV_QVIT_EVENTID, + WMI_10_2_WLAN_PROFILE_DATA_EVENTID, + WMI_10_2_RTT_MEASUREMENT_REPORT_EVENTID, + WMI_10_2_TSF_MEASUREMENT_REPORT_EVENTID, + WMI_10_2_RTT_ERROR_REPORT_EVENTID, + WMI_10_2_RTT_KEEPALIVE_EVENTID, + WMI_10_2_WOW_WAKEUP_HOST_EVENTID, + WMI_10_2_DCS_INTERFERENCE_EVENTID, + WMI_10_2_PDEV_TPC_CONFIG_EVENTID, + WMI_10_2_GPIO_INPUT_EVENTID, + WMI_10_2_PEER_RATECODE_LIST_EVENTID, + WMI_10_2_GENERIC_BUFFER_EVENTID, + WMI_10_2_MCAST_BUF_RELEASE_EVENTID, + WMI_10_2_MCAST_LIST_AGEOUT_EVENTID, + WMI_10_2_WDS_PEER_EVENTID, + WMI_10_2_PEER_STA_PS_STATECHG_EVENTID, + WMI_10_2_PDEV_TEMPERATURE_EVENTID, + WMI_10_2_MU_REPORT_EVENTID, + WMI_10_2_PDEV_BSS_CHAN_INFO_EVENTID, + WMI_10_2_PDEV_UTF_EVENTID = WMI_10_2_END_EVENTID - 1, +}; + +enum wmi_10_4_cmd_id { + WMI_10_4_START_CMDID = 0x9000, + WMI_10_4_END_CMDID = 0x9FFF, + WMI_10_4_INIT_CMDID, + WMI_10_4_START_SCAN_CMDID = WMI_10_4_START_CMDID, + WMI_10_4_STOP_SCAN_CMDID, + WMI_10_4_SCAN_CHAN_LIST_CMDID, + WMI_10_4_SCAN_SCH_PRIO_TBL_CMDID, + WMI_10_4_SCAN_UPDATE_REQUEST_CMDID, + WMI_10_4_ECHO_CMDID, + WMI_10_4_PDEV_SET_REGDOMAIN_CMDID, + WMI_10_4_PDEV_SET_CHANNEL_CMDID, + WMI_10_4_PDEV_SET_PARAM_CMDID, + WMI_10_4_PDEV_PKTLOG_ENABLE_CMDID, + WMI_10_4_PDEV_PKTLOG_DISABLE_CMDID, + WMI_10_4_PDEV_SET_WMM_PARAMS_CMDID, + WMI_10_4_PDEV_SET_HT_CAP_IE_CMDID, + WMI_10_4_PDEV_SET_VHT_CAP_IE_CMDID, + WMI_10_4_PDEV_SET_BASE_MACADDR_CMDID, + WMI_10_4_PDEV_SET_DSCP_TID_MAP_CMDID, + WMI_10_4_PDEV_SET_QUIET_MODE_CMDID, + WMI_10_4_PDEV_GREEN_AP_PS_ENABLE_CMDID, + WMI_10_4_PDEV_GET_TPC_CONFIG_CMDID, + WMI_10_4_VDEV_CREATE_CMDID, + WMI_10_4_VDEV_DELETE_CMDID, + WMI_10_4_VDEV_START_REQUEST_CMDID, + WMI_10_4_VDEV_RESTART_REQUEST_CMDID, + WMI_10_4_VDEV_UP_CMDID, + WMI_10_4_VDEV_STOP_CMDID, + WMI_10_4_VDEV_DOWN_CMDID, + WMI_10_4_VDEV_STANDBY_RESPONSE_CMDID, + WMI_10_4_VDEV_RESUME_RESPONSE_CMDID, + WMI_10_4_VDEV_SET_PARAM_CMDID, + WMI_10_4_VDEV_INSTALL_KEY_CMDID, + WMI_10_4_WLAN_PEER_CACHING_ADD_PEER_CMDID, + WMI_10_4_WLAN_PEER_CACHING_EVICT_PEER_CMDID, + WMI_10_4_WLAN_PEER_CACHING_RESTORE_PEER_CMDID, + WMI_10_4_WLAN_PEER_CACHING_PRINT_ALL_PEERS_INFO_CMDID, + WMI_10_4_PEER_CREATE_CMDID, + WMI_10_4_PEER_DELETE_CMDID, + WMI_10_4_PEER_FLUSH_TIDS_CMDID, + WMI_10_4_PEER_SET_PARAM_CMDID, + WMI_10_4_PEER_ASSOC_CMDID, + WMI_10_4_PEER_ADD_WDS_ENTRY_CMDID, + WMI_10_4_PEER_UPDATE_WDS_ENTRY_CMDID, + WMI_10_4_PEER_REMOVE_WDS_ENTRY_CMDID, + WMI_10_4_PEER_ADD_PROXY_STA_ENTRY_CMDID, + WMI_10_4_PEER_MCAST_GROUP_CMDID, + WMI_10_4_BCN_TX_CMDID, + WMI_10_4_PDEV_SEND_BCN_CMDID, + WMI_10_4_BCN_PRB_TMPL_CMDID, + WMI_10_4_BCN_FILTER_RX_CMDID, + WMI_10_4_PRB_REQ_FILTER_RX_CMDID, + WMI_10_4_MGMT_TX_CMDID, + WMI_10_4_PRB_TMPL_CMDID, + WMI_10_4_ADDBA_CLEAR_RESP_CMDID, + WMI_10_4_ADDBA_SEND_CMDID, + WMI_10_4_ADDBA_STATUS_CMDID, + WMI_10_4_DELBA_SEND_CMDID, + WMI_10_4_ADDBA_SET_RESP_CMDID, + WMI_10_4_SEND_SINGLEAMSDU_CMDID, + WMI_10_4_STA_POWERSAVE_MODE_CMDID, + WMI_10_4_STA_POWERSAVE_PARAM_CMDID, + WMI_10_4_STA_MIMO_PS_MODE_CMDID, + WMI_10_4_DBGLOG_CFG_CMDID, + WMI_10_4_PDEV_DFS_ENABLE_CMDID, + WMI_10_4_PDEV_DFS_DISABLE_CMDID, + WMI_10_4_PDEV_QVIT_CMDID, + WMI_10_4_ROAM_SCAN_MODE, + WMI_10_4_ROAM_SCAN_RSSI_THRESHOLD, + WMI_10_4_ROAM_SCAN_PERIOD, + WMI_10_4_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, + WMI_10_4_ROAM_AP_PROFILE, + WMI_10_4_OFL_SCAN_ADD_AP_PROFILE, + WMI_10_4_OFL_SCAN_REMOVE_AP_PROFILE, + WMI_10_4_OFL_SCAN_PERIOD, + WMI_10_4_P2P_DEV_SET_DEVICE_INFO, + WMI_10_4_P2P_DEV_SET_DISCOVERABILITY, + WMI_10_4_P2P_GO_SET_BEACON_IE, + WMI_10_4_P2P_GO_SET_PROBE_RESP_IE, + WMI_10_4_P2P_SET_VENDOR_IE_DATA_CMDID, + WMI_10_4_AP_PS_PEER_PARAM_CMDID, + WMI_10_4_AP_PS_PEER_UAPSD_COEX_CMDID, + WMI_10_4_PEER_RATE_RETRY_SCHED_CMDID, + WMI_10_4_WLAN_PROFILE_TRIGGER_CMDID, + WMI_10_4_WLAN_PROFILE_SET_HIST_INTVL_CMDID, + WMI_10_4_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, + WMI_10_4_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, + WMI_10_4_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, + WMI_10_4_PDEV_SUSPEND_CMDID, + WMI_10_4_PDEV_RESUME_CMDID, + WMI_10_4_ADD_BCN_FILTER_CMDID, + WMI_10_4_RMV_BCN_FILTER_CMDID, + WMI_10_4_WOW_ADD_WAKE_PATTERN_CMDID, + WMI_10_4_WOW_DEL_WAKE_PATTERN_CMDID, + WMI_10_4_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, + WMI_10_4_WOW_ENABLE_CMDID, + WMI_10_4_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, + WMI_10_4_RTT_MEASREQ_CMDID, + WMI_10_4_RTT_TSF_CMDID, + WMI_10_4_RTT_KEEPALIVE_CMDID, + WMI_10_4_OEM_REQ_CMDID, + WMI_10_4_NAN_CMDID, + WMI_10_4_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID, + WMI_10_4_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, + WMI_10_4_REQUEST_STATS_CMDID, + WMI_10_4_GPIO_CONFIG_CMDID, + WMI_10_4_GPIO_OUTPUT_CMDID, + WMI_10_4_VDEV_RATEMASK_CMDID, + WMI_10_4_CSA_OFFLOAD_ENABLE_CMDID, + WMI_10_4_GTK_OFFLOAD_CMDID, + WMI_10_4_QBOOST_CFG_CMDID, + WMI_10_4_CSA_OFFLOAD_CHANSWITCH_CMDID, + WMI_10_4_PDEV_SMART_ANT_ENABLE_CMDID, + WMI_10_4_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID, + WMI_10_4_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID, + WMI_10_4_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID, + WMI_10_4_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID, + WMI_10_4_VDEV_SET_KEEPALIVE_CMDID, + WMI_10_4_VDEV_GET_KEEPALIVE_CMDID, + WMI_10_4_FORCE_FW_HANG_CMDID, + WMI_10_4_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID, + WMI_10_4_PDEV_SET_CTL_TABLE_CMDID, + WMI_10_4_PDEV_SET_MIMOGAIN_TABLE_CMDID, + WMI_10_4_PDEV_RATEPWR_TABLE_CMDID, + WMI_10_4_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID, + WMI_10_4_PDEV_FIPS_CMDID, + WMI_10_4_TT_SET_CONF_CMDID, + WMI_10_4_FWTEST_CMDID, + WMI_10_4_VDEV_ATF_REQUEST_CMDID, + WMI_10_4_PEER_ATF_REQUEST_CMDID, + WMI_10_4_PDEV_GET_ANI_CCK_CONFIG_CMDID, + WMI_10_4_PDEV_GET_ANI_OFDM_CONFIG_CMDID, + WMI_10_4_PDEV_RESERVE_AST_ENTRY_CMDID, + WMI_10_4_PDEV_GET_NFCAL_POWER_CMDID, + WMI_10_4_PDEV_GET_TPC_CMDID, + WMI_10_4_PDEV_GET_AST_INFO_CMDID, + WMI_10_4_VDEV_SET_DSCP_TID_MAP_CMDID, + WMI_10_4_PDEV_GET_TEMPERATURE_CMDID, + WMI_10_4_PDEV_GET_INFO_CMDID, + WMI_10_4_VDEV_GET_INFO_CMDID, + WMI_10_4_VDEV_FILTER_NEIGHBOR_RX_PACKETS_CMDID, + WMI_10_4_MU_CAL_START_CMDID, + WMI_10_4_SET_CCA_PARAMS_CMDID, + WMI_10_4_PDEV_BSS_CHAN_INFO_REQUEST_CMDID, + WMI_10_4_EXT_RESOURCE_CFG_CMDID, + WMI_10_4_VDEV_SET_IE_CMDID, + WMI_10_4_SET_LTEU_CONFIG_CMDID, + WMI_10_4_ATF_SSID_GROUPING_REQUEST_CMDID, + WMI_10_4_PEER_ATF_EXT_REQUEST_CMDID, + WMI_10_4_SET_PERIODIC_CHANNEL_STATS_CONFIG, + WMI_10_4_PEER_BWF_REQUEST_CMDID, + WMI_10_4_BTCOEX_CFG_CMDID, + WMI_10_4_PEER_TX_MU_TXMIT_COUNT_CMDID, + WMI_10_4_PEER_TX_MU_TXMIT_RSTCNT_CMDID, + WMI_10_4_PEER_GID_USERPOS_LIST_CMDID, + WMI_10_4_PDEV_CHECK_CAL_VERSION_CMDID, + WMI_10_4_COEX_VERSION_CFG_CMID, + WMI_10_4_PDEV_GET_RX_FILTER_CMDID, + WMI_10_4_PDEV_EXTENDED_NSS_CFG_CMDID, + WMI_10_4_VDEV_SET_SCAN_NAC_RSSI_CMDID, + WMI_10_4_PROG_GPIO_BAND_SELECT_CMDID, + WMI_10_4_CONFIG_SMART_LOGGING_CMDID, + WMI_10_4_DEBUG_FATAL_CONDITION_CMDID, + WMI_10_4_GET_TSF_TIMER_CMDID, + WMI_10_4_PDEV_GET_TPC_TABLE_CMDID, + WMI_10_4_VDEV_SIFS_TRIGGER_TIME_CMDID, + WMI_10_4_PDEV_WDS_ENTRY_LIST_CMDID, + WMI_10_4_TDLS_SET_STATE_CMDID, + WMI_10_4_TDLS_PEER_UPDATE_CMDID, + WMI_10_4_TDLS_SET_OFFCHAN_MODE_CMDID, + WMI_10_4_PDEV_SEND_FD_CMDID, + WMI_10_4_ENABLE_FILS_CMDID, + WMI_10_4_PDEV_SET_BRIDGE_MACADDR_CMDID, + WMI_10_4_ATF_GROUP_WMM_AC_CONFIG_REQUEST_CMDID, + WMI_10_4_RADAR_FOUND_CMDID, + WMI_10_4_PEER_CFR_CAPTURE_CMDID, + WMI_10_4_PER_PEER_PER_TID_CONFIG_CMDID, + WMI_10_4_PDEV_UTF_CMDID = WMI_10_4_END_CMDID - 1, +}; + +enum wmi_10_4_event_id { + WMI_10_4_SERVICE_READY_EVENTID = 0x8000, + WMI_10_4_READY_EVENTID, + WMI_10_4_DEBUG_MESG_EVENTID, + WMI_10_4_START_EVENTID = 0x9000, + WMI_10_4_END_EVENTID = 0x9FFF, + WMI_10_4_SCAN_EVENTID = WMI_10_4_START_EVENTID, + WMI_10_4_ECHO_EVENTID, + WMI_10_4_UPDATE_STATS_EVENTID, + WMI_10_4_INST_RSSI_STATS_EVENTID, + WMI_10_4_VDEV_START_RESP_EVENTID, + WMI_10_4_VDEV_STANDBY_REQ_EVENTID, + WMI_10_4_VDEV_RESUME_REQ_EVENTID, + WMI_10_4_VDEV_STOPPED_EVENTID, + WMI_10_4_PEER_STA_KICKOUT_EVENTID, + WMI_10_4_HOST_SWBA_EVENTID, + WMI_10_4_TBTTOFFSET_UPDATE_EVENTID, + WMI_10_4_MGMT_RX_EVENTID, + WMI_10_4_CHAN_INFO_EVENTID, + WMI_10_4_PHYERR_EVENTID, + WMI_10_4_ROAM_EVENTID, + WMI_10_4_PROFILE_MATCH, + WMI_10_4_DEBUG_PRINT_EVENTID, + WMI_10_4_PDEV_QVIT_EVENTID, + WMI_10_4_WLAN_PROFILE_DATA_EVENTID, + WMI_10_4_RTT_MEASUREMENT_REPORT_EVENTID, + WMI_10_4_TSF_MEASUREMENT_REPORT_EVENTID, + WMI_10_4_RTT_ERROR_REPORT_EVENTID, + WMI_10_4_RTT_KEEPALIVE_EVENTID, + WMI_10_4_OEM_CAPABILITY_EVENTID, + WMI_10_4_OEM_MEASUREMENT_REPORT_EVENTID, + WMI_10_4_OEM_ERROR_REPORT_EVENTID, + WMI_10_4_NAN_EVENTID, + WMI_10_4_WOW_WAKEUP_HOST_EVENTID, + WMI_10_4_GTK_OFFLOAD_STATUS_EVENTID, + WMI_10_4_GTK_REKEY_FAIL_EVENTID, + WMI_10_4_DCS_INTERFERENCE_EVENTID, + WMI_10_4_PDEV_TPC_CONFIG_EVENTID, + WMI_10_4_CSA_HANDLING_EVENTID, + WMI_10_4_GPIO_INPUT_EVENTID, + WMI_10_4_PEER_RATECODE_LIST_EVENTID, + WMI_10_4_GENERIC_BUFFER_EVENTID, + WMI_10_4_MCAST_BUF_RELEASE_EVENTID, + WMI_10_4_MCAST_LIST_AGEOUT_EVENTID, + WMI_10_4_VDEV_GET_KEEPALIVE_EVENTID, + WMI_10_4_WDS_PEER_EVENTID, + WMI_10_4_PEER_STA_PS_STATECHG_EVENTID, + WMI_10_4_PDEV_FIPS_EVENTID, + WMI_10_4_TT_STATS_EVENTID, + WMI_10_4_PDEV_CHANNEL_HOPPING_EVENTID, + WMI_10_4_PDEV_ANI_CCK_LEVEL_EVENTID, + WMI_10_4_PDEV_ANI_OFDM_LEVEL_EVENTID, + WMI_10_4_PDEV_RESERVE_AST_ENTRY_EVENTID, + WMI_10_4_PDEV_NFCAL_POWER_EVENTID, + WMI_10_4_PDEV_TPC_EVENTID, + WMI_10_4_PDEV_GET_AST_INFO_EVENTID, + WMI_10_4_PDEV_TEMPERATURE_EVENTID, + WMI_10_4_PDEV_NFCAL_POWER_ALL_CHANNELS_EVENTID, + WMI_10_4_PDEV_BSS_CHAN_INFO_EVENTID, + WMI_10_4_MU_REPORT_EVENTID, + WMI_10_4_TX_DATA_TRAFFIC_CTRL_EVENTID, + WMI_10_4_PEER_TX_MU_TXMIT_COUNT_EVENTID, + WMI_10_4_PEER_GID_USERPOS_LIST_EVENTID, + WMI_10_4_PDEV_CHECK_CAL_VERSION_EVENTID, + WMI_10_4_ATF_PEER_STATS_EVENTID, + WMI_10_4_PDEV_GET_RX_FILTER_EVENTID, + WMI_10_4_NAC_RSSI_EVENTID, + WMI_10_4_DEBUG_FATAL_CONDITION_EVENTID, + WMI_10_4_GET_TSF_TIMER_RESP_EVENTID, + WMI_10_4_PDEV_TPC_TABLE_EVENTID, + WMI_10_4_PDEV_WDS_ENTRY_LIST_EVENTID, + WMI_10_4_TDLS_PEER_EVENTID, + WMI_10_4_HOST_SWFDA_EVENTID, + WMI_10_4_ESP_ESTIMATE_EVENTID, + WMI_10_4_DFS_STATUS_CHECK_EVENTID, + WMI_10_4_PDEV_UTF_EVENTID = WMI_10_4_END_EVENTID - 1, +}; + +enum wmi_phy_mode { + MODE_11A = 0, /* 11a Mode */ + MODE_11G = 1, /* 11b/g Mode */ + MODE_11B = 2, /* 11b Mode */ + MODE_11GONLY = 3, /* 11g only Mode */ + MODE_11NA_HT20 = 4, /* 11a HT20 mode */ + MODE_11NG_HT20 = 5, /* 11g HT20 mode */ + MODE_11NA_HT40 = 6, /* 11a HT40 mode */ + MODE_11NG_HT40 = 7, /* 11g HT40 mode */ + MODE_11AC_VHT20 = 8, + MODE_11AC_VHT40 = 9, + MODE_11AC_VHT80 = 10, + /* MODE_11AC_VHT160 = 11, */ + MODE_11AC_VHT20_2G = 11, + MODE_11AC_VHT40_2G = 12, + MODE_11AC_VHT80_2G = 13, + MODE_11AC_VHT80_80 = 14, + MODE_11AC_VHT160 = 15, + MODE_UNKNOWN = 16, + MODE_MAX = 16 +}; + +static inline const char *ath10k_wmi_phymode_str(enum wmi_phy_mode mode) +{ + switch (mode) { + case MODE_11A: + return "11a"; + case MODE_11G: + return "11g"; + case MODE_11B: + return "11b"; + case MODE_11GONLY: + return "11gonly"; + case MODE_11NA_HT20: + return "11na-ht20"; + case MODE_11NG_HT20: + return "11ng-ht20"; + case MODE_11NA_HT40: + return "11na-ht40"; + case MODE_11NG_HT40: + return "11ng-ht40"; + case MODE_11AC_VHT20: + return "11ac-vht20"; + case MODE_11AC_VHT40: + return "11ac-vht40"; + case MODE_11AC_VHT80: + return "11ac-vht80"; + case MODE_11AC_VHT160: + return "11ac-vht160"; + case MODE_11AC_VHT80_80: + return "11ac-vht80+80"; + case MODE_11AC_VHT20_2G: + return "11ac-vht20-2g"; + case MODE_11AC_VHT40_2G: + return "11ac-vht40-2g"; + case MODE_11AC_VHT80_2G: + return "11ac-vht80-2g"; + case MODE_UNKNOWN: + /* skip */ + break; + + /* no default handler to allow compiler to check that the + * enum is fully handled + */ + } + + return "<unknown>"; +} + +#define WMI_CHAN_LIST_TAG 0x1 +#define WMI_SSID_LIST_TAG 0x2 +#define WMI_BSSID_LIST_TAG 0x3 +#define WMI_IE_TAG 0x4 + +struct wmi_channel { + __le32 mhz; + __le32 band_center_freq1; + __le32 band_center_freq2; /* valid for 11ac, 80plus80 */ + union { + __le32 flags; /* WMI_CHAN_FLAG_ */ + struct { + u8 mode; /* only 6 LSBs */ + } __packed; + } __packed; + union { + __le32 reginfo0; + struct { + /* note: power unit is 0.5 dBm */ + u8 min_power; + u8 max_power; + u8 reg_power; + u8 reg_classid; + } __packed; + } __packed; + union { + __le32 reginfo1; + struct { + /* note: power unit is 1 dBm */ + u8 antenna_max; + /* note: power unit is 0.5 dBm */ + u8 max_tx_power; + } __packed; + } __packed; +} __packed; + +struct wmi_channel_arg { + u32 freq; + u32 band_center_freq1; + u32 band_center_freq2; + bool passive; + bool allow_ibss; + bool allow_ht; + bool allow_vht; + bool ht40plus; + bool chan_radar; + /* note: power unit is 0.5 dBm */ + u32 min_power; + u32 max_power; + u32 max_reg_power; + /* note: power unit is 1 dBm */ + u32 max_antenna_gain; + u32 reg_class_id; + enum wmi_phy_mode mode; +}; + +enum wmi_channel_change_cause { + WMI_CHANNEL_CHANGE_CAUSE_NONE = 0, + WMI_CHANNEL_CHANGE_CAUSE_CSA, +}; + +#define WMI_CHAN_FLAG_HT40_PLUS (1 << 6) +#define WMI_CHAN_FLAG_PASSIVE (1 << 7) +#define WMI_CHAN_FLAG_ADHOC_ALLOWED (1 << 8) +#define WMI_CHAN_FLAG_AP_DISABLED (1 << 9) +#define WMI_CHAN_FLAG_DFS (1 << 10) +#define WMI_CHAN_FLAG_ALLOW_HT (1 << 11) +#define WMI_CHAN_FLAG_ALLOW_VHT (1 << 12) + +/* Indicate reason for channel switch */ +#define WMI_CHANNEL_CHANGE_CAUSE_CSA (1 << 13) +/* DFS required on channel for 2nd segment of VHT160 and VHT80+80*/ +#define WMI_CHAN_FLAG_DFS_CFREQ2 (1 << 15) +#define WMI_MAX_SPATIAL_STREAM 3 /* default max ss */ + +/* HT Capabilities*/ +#define WMI_HT_CAP_ENABLED 0x0001 /* HT Enabled/ disabled */ +#define WMI_HT_CAP_HT20_SGI 0x0002 /* Short Guard Interval with HT20 */ +#define WMI_HT_CAP_DYNAMIC_SMPS 0x0004 /* Dynamic MIMO powersave */ +#define WMI_HT_CAP_TX_STBC 0x0008 /* B3 TX STBC */ +#define WMI_HT_CAP_TX_STBC_MASK_SHIFT 3 +#define WMI_HT_CAP_RX_STBC 0x0030 /* B4-B5 RX STBC */ +#define WMI_HT_CAP_RX_STBC_MASK_SHIFT 4 +#define WMI_HT_CAP_LDPC 0x0040 /* LDPC supported */ +#define WMI_HT_CAP_L_SIG_TXOP_PROT 0x0080 /* L-SIG TXOP Protection */ +#define WMI_HT_CAP_MPDU_DENSITY 0x0700 /* MPDU Density */ +#define WMI_HT_CAP_MPDU_DENSITY_MASK_SHIFT 8 +#define WMI_HT_CAP_HT40_SGI 0x0800 +#define WMI_HT_CAP_RX_LDPC 0x1000 /* LDPC RX support */ +#define WMI_HT_CAP_TX_LDPC 0x2000 /* LDPC TX support */ + +#define WMI_HT_CAP_DEFAULT_ALL (WMI_HT_CAP_ENABLED | \ + WMI_HT_CAP_HT20_SGI | \ + WMI_HT_CAP_HT40_SGI | \ + WMI_HT_CAP_TX_STBC | \ + WMI_HT_CAP_RX_STBC | \ + WMI_HT_CAP_LDPC) + +/* + * WMI_VHT_CAP_* these maps to ieee 802.11ac vht capability information + * field. The fields not defined here are not supported, or reserved. + * Do not change these masks and if you have to add new one follow the + * bitmask as specified by 802.11ac draft. + */ + +#define WMI_VHT_CAP_MAX_MPDU_LEN_MASK 0x00000003 +#define WMI_VHT_CAP_RX_LDPC 0x00000010 +#define WMI_VHT_CAP_SGI_80MHZ 0x00000020 +#define WMI_VHT_CAP_SGI_160MHZ 0x00000040 +#define WMI_VHT_CAP_TX_STBC 0x00000080 +#define WMI_VHT_CAP_RX_STBC_MASK 0x00000300 +#define WMI_VHT_CAP_RX_STBC_MASK_SHIFT 8 +#define WMI_VHT_CAP_SU_BFER 0x00000800 +#define WMI_VHT_CAP_SU_BFEE 0x00001000 +#define WMI_VHT_CAP_MAX_CS_ANT_MASK 0x0000E000 +#define WMI_VHT_CAP_MAX_CS_ANT_MASK_SHIFT 13 +#define WMI_VHT_CAP_MAX_SND_DIM_MASK 0x00070000 +#define WMI_VHT_CAP_MAX_SND_DIM_MASK_SHIFT 16 +#define WMI_VHT_CAP_MU_BFER 0x00080000 +#define WMI_VHT_CAP_MU_BFEE 0x00100000 +#define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP 0x03800000 +#define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP_SHIFT 23 +#define WMI_VHT_CAP_RX_FIXED_ANT 0x10000000 +#define WMI_VHT_CAP_TX_FIXED_ANT 0x20000000 + +/* The following also refer for max HT AMSDU */ +#define WMI_VHT_CAP_MAX_MPDU_LEN_3839 0x00000000 +#define WMI_VHT_CAP_MAX_MPDU_LEN_7935 0x00000001 +#define WMI_VHT_CAP_MAX_MPDU_LEN_11454 0x00000002 + +#define WMI_VHT_CAP_DEFAULT_ALL (WMI_VHT_CAP_MAX_MPDU_LEN_11454 | \ + WMI_VHT_CAP_RX_LDPC | \ + WMI_VHT_CAP_SGI_80MHZ | \ + WMI_VHT_CAP_TX_STBC | \ + WMI_VHT_CAP_RX_STBC_MASK | \ + WMI_VHT_CAP_MAX_AMPDU_LEN_EXP | \ + WMI_VHT_CAP_RX_FIXED_ANT | \ + WMI_VHT_CAP_TX_FIXED_ANT) + +/* + * Interested readers refer to Rx/Tx MCS Map definition as defined in + * 802.11ac + */ +#define WMI_VHT_MAX_MCS_4_SS_MASK(r, ss) ((3 & (r)) << (((ss) - 1) << 1)) +#define WMI_VHT_MAX_SUPP_RATE_MASK 0x1fff0000 +#define WMI_VHT_MAX_SUPP_RATE_MASK_SHIFT 16 + +enum { + REGDMN_MODE_11A = 0x00001, /* 11a channels */ + REGDMN_MODE_TURBO = 0x00002, /* 11a turbo-only channels */ + REGDMN_MODE_11B = 0x00004, /* 11b channels */ + REGDMN_MODE_PUREG = 0x00008, /* 11g channels (OFDM only) */ + REGDMN_MODE_11G = 0x00008, /* XXX historical */ + REGDMN_MODE_108G = 0x00020, /* 11a+Turbo channels */ + REGDMN_MODE_108A = 0x00040, /* 11g+Turbo channels */ + REGDMN_MODE_XR = 0x00100, /* XR channels */ + REGDMN_MODE_11A_HALF_RATE = 0x00200, /* 11A half rate channels */ + REGDMN_MODE_11A_QUARTER_RATE = 0x00400, /* 11A quarter rate channels */ + REGDMN_MODE_11NG_HT20 = 0x00800, /* 11N-G HT20 channels */ + REGDMN_MODE_11NA_HT20 = 0x01000, /* 11N-A HT20 channels */ + REGDMN_MODE_11NG_HT40PLUS = 0x02000, /* 11N-G HT40 + channels */ + REGDMN_MODE_11NG_HT40MINUS = 0x04000, /* 11N-G HT40 - channels */ + REGDMN_MODE_11NA_HT40PLUS = 0x08000, /* 11N-A HT40 + channels */ + REGDMN_MODE_11NA_HT40MINUS = 0x10000, /* 11N-A HT40 - channels */ + REGDMN_MODE_11AC_VHT20 = 0x20000, /* 5Ghz, VHT20 */ + REGDMN_MODE_11AC_VHT40PLUS = 0x40000, /* 5Ghz, VHT40 + channels */ + REGDMN_MODE_11AC_VHT40MINUS = 0x80000, /* 5Ghz VHT40 - channels */ + REGDMN_MODE_11AC_VHT80 = 0x100000, /* 5Ghz, VHT80 channels */ + REGDMN_MODE_11AC_VHT160 = 0x200000, /* 5Ghz, VHT160 channels */ + REGDMN_MODE_11AC_VHT80_80 = 0x400000, /* 5Ghz, VHT80+80 channels */ + REGDMN_MODE_ALL = 0xffffffff +}; + +#define REGDMN_CAP1_CHAN_HALF_RATE 0x00000001 +#define REGDMN_CAP1_CHAN_QUARTER_RATE 0x00000002 +#define REGDMN_CAP1_CHAN_HAL49GHZ 0x00000004 + +/* regulatory capabilities */ +#define REGDMN_EEPROM_EEREGCAP_EN_FCC_MIDBAND 0x0040 +#define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_EVEN 0x0080 +#define REGDMN_EEPROM_EEREGCAP_EN_KK_U2 0x0100 +#define REGDMN_EEPROM_EEREGCAP_EN_KK_MIDBAND 0x0200 +#define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_ODD 0x0400 +#define REGDMN_EEPROM_EEREGCAP_EN_KK_NEW_11A 0x0800 + +struct hal_reg_capabilities { + /* regdomain value specified in EEPROM */ + __le32 eeprom_rd; + /*regdomain */ + __le32 eeprom_rd_ext; + /* CAP1 capabilities bit map. */ + __le32 regcap1; + /* REGDMN EEPROM CAP. */ + __le32 regcap2; + /* REGDMN MODE */ + __le32 wireless_modes; + __le32 low_2ghz_chan; + __le32 high_2ghz_chan; + __le32 low_5ghz_chan; + __le32 high_5ghz_chan; +} __packed; + +enum wlan_mode_capability { + WHAL_WLAN_11A_CAPABILITY = 0x1, + WHAL_WLAN_11G_CAPABILITY = 0x2, + WHAL_WLAN_11AG_CAPABILITY = 0x3, +}; + +/* structure used by FW for requesting host memory */ +struct wlan_host_mem_req { + /* ID of the request */ + __le32 req_id; + /* size of the of each unit */ + __le32 unit_size; + /* flags to indicate that + * the number units is dependent + * on number of resources(num vdevs num peers .. etc) + */ + __le32 num_unit_info; + /* + * actual number of units to allocate . if flags in the num_unit_info + * indicate that number of units is tied to number of a particular + * resource to allocate then num_units filed is set to 0 and host + * will derive the number units from number of the resources it is + * requesting. + */ + __le32 num_units; +} __packed; + +/* + * The following struct holds optional payload for + * wmi_service_ready_event,e.g., 11ac pass some of the + * device capability to the host. + */ +struct wmi_service_ready_event { + __le32 sw_version; + __le32 sw_version_1; + __le32 abi_version; + /* WMI_PHY_CAPABILITY */ + __le32 phy_capability; + /* Maximum number of frag table entries that SW will populate less 1 */ + __le32 max_frag_entry; + __le32 wmi_service_bitmap[16]; + __le32 num_rf_chains; + /* + * The following field is only valid for service type + * WMI_SERVICE_11AC + */ + __le32 ht_cap_info; /* WMI HT Capability */ + __le32 vht_cap_info; /* VHT capability info field of 802.11ac */ + __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */ + __le32 hw_min_tx_power; + __le32 hw_max_tx_power; + struct hal_reg_capabilities hal_reg_capabilities; + __le32 sys_cap_info; + __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */ + /* + * Max beacon and Probe Response IE offload size + * (includes optional P2P IEs) + */ + __le32 max_bcn_ie_size; + /* + * request to host to allocate a chuck of memory and pss it down to FW + * via WM_INIT. FW uses this as FW extesnsion memory for saving its + * data structures. Only valid for low latency interfaces like PCIE + * where FW can access this memory directly (or) by DMA. + */ + __le32 num_mem_reqs; + struct wlan_host_mem_req mem_reqs[]; +} __packed; + +/* This is the definition from 10.X firmware branch */ +struct wmi_10x_service_ready_event { + __le32 sw_version; + __le32 abi_version; + + /* WMI_PHY_CAPABILITY */ + __le32 phy_capability; + + /* Maximum number of frag table entries that SW will populate less 1 */ + __le32 max_frag_entry; + __le32 wmi_service_bitmap[16]; + __le32 num_rf_chains; + + /* + * The following field is only valid for service type + * WMI_SERVICE_11AC + */ + __le32 ht_cap_info; /* WMI HT Capability */ + __le32 vht_cap_info; /* VHT capability info field of 802.11ac */ + __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */ + __le32 hw_min_tx_power; + __le32 hw_max_tx_power; + + struct hal_reg_capabilities hal_reg_capabilities; + + __le32 sys_cap_info; + __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */ + + /* + * request to host to allocate a chuck of memory and pss it down to FW + * via WM_INIT. FW uses this as FW extesnsion memory for saving its + * data structures. Only valid for low latency interfaces like PCIE + * where FW can access this memory directly (or) by DMA. + */ + __le32 num_mem_reqs; + + struct wlan_host_mem_req mem_reqs[]; +} __packed; + +#define WMI_SERVICE_READY_TIMEOUT_HZ (5 * HZ) +#define WMI_UNIFIED_READY_TIMEOUT_HZ (5 * HZ) + +struct wmi_ready_event { + __le32 sw_version; + __le32 abi_version; + struct wmi_mac_addr mac_addr; + __le32 status; +} __packed; + +struct wmi_resource_config { + /* number of virtual devices (VAPs) to support */ + __le32 num_vdevs; + + /* number of peer nodes to support */ + __le32 num_peers; + + /* + * In offload mode target supports features like WOW, chatter and + * other protocol offloads. In order to support them some + * functionalities like reorder buffering, PN checking need to be + * done in target. This determines maximum number of peers supported + * by target in offload mode + */ + __le32 num_offload_peers; + + /* For target-based RX reordering */ + __le32 num_offload_reorder_bufs; + + /* number of keys per peer */ + __le32 num_peer_keys; + + /* total number of TX/RX data TIDs */ + __le32 num_tids; + + /* + * max skid for resolving hash collisions + * + * The address search table is sparse, so that if two MAC addresses + * result in the same hash value, the second of these conflicting + * entries can slide to the next index in the address search table, + * and use it, if it is unoccupied. This ast_skid_limit parameter + * specifies the upper bound on how many subsequent indices to search + * over to find an unoccupied space. + */ + __le32 ast_skid_limit; + + /* + * the nominal chain mask for transmit + * + * The chain mask may be modified dynamically, e.g. to operate AP + * tx with a reduced number of chains if no clients are associated. + * This configuration parameter specifies the nominal chain-mask that + * should be used when not operating with a reduced set of tx chains. + */ + __le32 tx_chain_mask; + + /* + * the nominal chain mask for receive + * + * The chain mask may be modified dynamically, e.g. for a client + * to use a reduced number of chains for receive if the traffic to + * the client is low enough that it doesn't require downlink MIMO + * or antenna diversity. + * This configuration parameter specifies the nominal chain-mask that + * should be used when not operating with a reduced set of rx chains. + */ + __le32 rx_chain_mask; + + /* + * what rx reorder timeout (ms) to use for the AC + * + * Each WMM access class (voice, video, best-effort, background) will + * have its own timeout value to dictate how long to wait for missing + * rx MPDUs to arrive before flushing subsequent MPDUs that have + * already been received. + * This parameter specifies the timeout in milliseconds for each + * class. + */ + __le32 rx_timeout_pri_vi; + __le32 rx_timeout_pri_vo; + __le32 rx_timeout_pri_be; + __le32 rx_timeout_pri_bk; + + /* + * what mode the rx should decap packets to + * + * MAC can decap to RAW (no decap), native wifi or Ethernet types + * THis setting also determines the default TX behavior, however TX + * behavior can be modified on a per VAP basis during VAP init + */ + __le32 rx_decap_mode; + + /* what is the maximum number of scan requests that can be queued */ + __le32 scan_max_pending_reqs; + + /* maximum VDEV that could use BMISS offload */ + __le32 bmiss_offload_max_vdev; + + /* maximum VDEV that could use offload roaming */ + __le32 roam_offload_max_vdev; + + /* maximum AP profiles that would push to offload roaming */ + __le32 roam_offload_max_ap_profiles; + + /* + * how many groups to use for mcast->ucast conversion + * + * The target's WAL maintains a table to hold information regarding + * which peers belong to a given multicast group, so that if + * multicast->unicast conversion is enabled, the target can convert + * multicast tx frames to a series of unicast tx frames, to each + * peer within the multicast group. + This num_mcast_groups configuration parameter tells the target how + * many multicast groups to provide storage for within its multicast + * group membership table. + */ + __le32 num_mcast_groups; + + /* + * size to alloc for the mcast membership table + * + * This num_mcast_table_elems configuration parameter tells the + * target how many peer elements it needs to provide storage for in + * its multicast group membership table. + * These multicast group membership table elements are shared by the + * multicast groups stored within the table. + */ + __le32 num_mcast_table_elems; + + /* + * whether/how to do multicast->unicast conversion + * + * This configuration parameter specifies whether the target should + * perform multicast --> unicast conversion on transmit, and if so, + * what to do if it finds no entries in its multicast group + * membership table for the multicast IP address in the tx frame. + * Configuration value: + * 0 -> Do not perform multicast to unicast conversion. + * 1 -> Convert multicast frames to unicast, if the IP multicast + * address from the tx frame is found in the multicast group + * membership table. If the IP multicast address is not found, + * drop the frame. + * 2 -> Convert multicast frames to unicast, if the IP multicast + * address from the tx frame is found in the multicast group + * membership table. If the IP multicast address is not found, + * transmit the frame as multicast. + */ + __le32 mcast2ucast_mode; + + /* + * how much memory to allocate for a tx PPDU dbg log + * + * This parameter controls how much memory the target will allocate + * to store a log of tx PPDU meta-information (how large the PPDU + * was, when it was sent, whether it was successful, etc.) + */ + __le32 tx_dbg_log_size; + + /* how many AST entries to be allocated for WDS */ + __le32 num_wds_entries; + + /* + * MAC DMA burst size, e.g., For target PCI limit can be + * 0 -default, 1 256B + */ + __le32 dma_burst_size; + + /* + * Fixed delimiters to be inserted after every MPDU to + * account for interface latency to avoid underrun. + */ + __le32 mac_aggr_delim; + + /* + * determine whether target is responsible for detecting duplicate + * non-aggregate MPDU and timing out stale fragments. + * + * A-MPDU reordering is always performed on the target. + * + * 0: target responsible for frag timeout and dup checking + * 1: host responsible for frag timeout and dup checking + */ + __le32 rx_skip_defrag_timeout_dup_detection_check; + + /* + * Configuration for VoW : + * No of Video Nodes to be supported + * and Max no of descriptors for each Video link (node). + */ + __le32 vow_config; + + /* maximum VDEV that could use GTK offload */ + __le32 gtk_offload_max_vdev; + + /* Number of msdu descriptors target should use */ + __le32 num_msdu_desc; + + /* + * Max. number of Tx fragments per MSDU + * This parameter controls the max number of Tx fragments per MSDU. + * This is sent by the target as part of the WMI_SERVICE_READY event + * and is overridden by the OS shim as required. + */ + __le32 max_frag_entries; +} __packed; + +struct wmi_resource_config_10x { + /* number of virtual devices (VAPs) to support */ + __le32 num_vdevs; + + /* number of peer nodes to support */ + __le32 num_peers; + + /* number of keys per peer */ + __le32 num_peer_keys; + + /* total number of TX/RX data TIDs */ + __le32 num_tids; + + /* + * max skid for resolving hash collisions + * + * The address search table is sparse, so that if two MAC addresses + * result in the same hash value, the second of these conflicting + * entries can slide to the next index in the address search table, + * and use it, if it is unoccupied. This ast_skid_limit parameter + * specifies the upper bound on how many subsequent indices to search + * over to find an unoccupied space. + */ + __le32 ast_skid_limit; + + /* + * the nominal chain mask for transmit + * + * The chain mask may be modified dynamically, e.g. to operate AP + * tx with a reduced number of chains if no clients are associated. + * This configuration parameter specifies the nominal chain-mask that + * should be used when not operating with a reduced set of tx chains. + */ + __le32 tx_chain_mask; + + /* + * the nominal chain mask for receive + * + * The chain mask may be modified dynamically, e.g. for a client + * to use a reduced number of chains for receive if the traffic to + * the client is low enough that it doesn't require downlink MIMO + * or antenna diversity. + * This configuration parameter specifies the nominal chain-mask that + * should be used when not operating with a reduced set of rx chains. + */ + __le32 rx_chain_mask; + + /* + * what rx reorder timeout (ms) to use for the AC + * + * Each WMM access class (voice, video, best-effort, background) will + * have its own timeout value to dictate how long to wait for missing + * rx MPDUs to arrive before flushing subsequent MPDUs that have + * already been received. + * This parameter specifies the timeout in milliseconds for each + * class. + */ + __le32 rx_timeout_pri_vi; + __le32 rx_timeout_pri_vo; + __le32 rx_timeout_pri_be; + __le32 rx_timeout_pri_bk; + + /* + * what mode the rx should decap packets to + * + * MAC can decap to RAW (no decap), native wifi or Ethernet types + * THis setting also determines the default TX behavior, however TX + * behavior can be modified on a per VAP basis during VAP init + */ + __le32 rx_decap_mode; + + /* what is the maximum number of scan requests that can be queued */ + __le32 scan_max_pending_reqs; + + /* maximum VDEV that could use BMISS offload */ + __le32 bmiss_offload_max_vdev; + + /* maximum VDEV that could use offload roaming */ + __le32 roam_offload_max_vdev; + + /* maximum AP profiles that would push to offload roaming */ + __le32 roam_offload_max_ap_profiles; + + /* + * how many groups to use for mcast->ucast conversion + * + * The target's WAL maintains a table to hold information regarding + * which peers belong to a given multicast group, so that if + * multicast->unicast conversion is enabled, the target can convert + * multicast tx frames to a series of unicast tx frames, to each + * peer within the multicast group. + This num_mcast_groups configuration parameter tells the target how + * many multicast groups to provide storage for within its multicast + * group membership table. + */ + __le32 num_mcast_groups; + + /* + * size to alloc for the mcast membership table + * + * This num_mcast_table_elems configuration parameter tells the + * target how many peer elements it needs to provide storage for in + * its multicast group membership table. + * These multicast group membership table elements are shared by the + * multicast groups stored within the table. + */ + __le32 num_mcast_table_elems; + + /* + * whether/how to do multicast->unicast conversion + * + * This configuration parameter specifies whether the target should + * perform multicast --> unicast conversion on transmit, and if so, + * what to do if it finds no entries in its multicast group + * membership table for the multicast IP address in the tx frame. + * Configuration value: + * 0 -> Do not perform multicast to unicast conversion. + * 1 -> Convert multicast frames to unicast, if the IP multicast + * address from the tx frame is found in the multicast group + * membership table. If the IP multicast address is not found, + * drop the frame. + * 2 -> Convert multicast frames to unicast, if the IP multicast + * address from the tx frame is found in the multicast group + * membership table. If the IP multicast address is not found, + * transmit the frame as multicast. + */ + __le32 mcast2ucast_mode; + + /* + * how much memory to allocate for a tx PPDU dbg log + * + * This parameter controls how much memory the target will allocate + * to store a log of tx PPDU meta-information (how large the PPDU + * was, when it was sent, whether it was successful, etc.) + */ + __le32 tx_dbg_log_size; + + /* how many AST entries to be allocated for WDS */ + __le32 num_wds_entries; + + /* + * MAC DMA burst size, e.g., For target PCI limit can be + * 0 -default, 1 256B + */ + __le32 dma_burst_size; + + /* + * Fixed delimiters to be inserted after every MPDU to + * account for interface latency to avoid underrun. + */ + __le32 mac_aggr_delim; + + /* + * determine whether target is responsible for detecting duplicate + * non-aggregate MPDU and timing out stale fragments. + * + * A-MPDU reordering is always performed on the target. + * + * 0: target responsible for frag timeout and dup checking + * 1: host responsible for frag timeout and dup checking + */ + __le32 rx_skip_defrag_timeout_dup_detection_check; + + /* + * Configuration for VoW : + * No of Video Nodes to be supported + * and Max no of descriptors for each Video link (node). + */ + __le32 vow_config; + + /* Number of msdu descriptors target should use */ + __le32 num_msdu_desc; + + /* + * Max. number of Tx fragments per MSDU + * This parameter controls the max number of Tx fragments per MSDU. + * This is sent by the target as part of the WMI_SERVICE_READY event + * and is overridden by the OS shim as required. + */ + __le32 max_frag_entries; +} __packed; + +enum wmi_10_2_feature_mask { + WMI_10_2_RX_BATCH_MODE = BIT(0), + WMI_10_2_ATF_CONFIG = BIT(1), + WMI_10_2_COEX_GPIO = BIT(3), + WMI_10_2_BSS_CHAN_INFO = BIT(6), + WMI_10_2_PEER_STATS = BIT(7), +}; + +struct wmi_resource_config_10_2 { + struct wmi_resource_config_10x common; + __le32 max_peer_ext_stats; + __le32 smart_ant_cap; /* 0-disable, 1-enable */ + __le32 bk_min_free; + __le32 be_min_free; + __le32 vi_min_free; + __le32 vo_min_free; + __le32 feature_mask; +} __packed; + +#define NUM_UNITS_IS_NUM_VDEVS BIT(0) +#define NUM_UNITS_IS_NUM_PEERS BIT(1) +#define NUM_UNITS_IS_NUM_ACTIVE_PEERS BIT(2) + +struct wmi_resource_config_10_4 { + /* Number of virtual devices (VAPs) to support */ + __le32 num_vdevs; + + /* Number of peer nodes to support */ + __le32 num_peers; + + /* Number of active peer nodes to support */ + __le32 num_active_peers; + + /* In offload mode, target supports features like WOW, chatter and other + * protocol offloads. In order to support them some functionalities like + * reorder buffering, PN checking need to be done in target. + * This determines maximum number of peers supported by target in + * offload mode. + */ + __le32 num_offload_peers; + + /* Number of reorder buffers available for doing target based reorder + * Rx reorder buffering + */ + __le32 num_offload_reorder_buffs; + + /* Number of keys per peer */ + __le32 num_peer_keys; + + /* Total number of TX/RX data TIDs */ + __le32 num_tids; + + /* Max skid for resolving hash collisions. + * The address search table is sparse, so that if two MAC addresses + * result in the same hash value, the second of these conflicting + * entries can slide to the next index in the address search table, + * and use it, if it is unoccupied. This ast_skid_limit parameter + * specifies the upper bound on how many subsequent indices to search + * over to find an unoccupied space. + */ + __le32 ast_skid_limit; + + /* The nominal chain mask for transmit. + * The chain mask may be modified dynamically, e.g. to operate AP tx + * with a reduced number of chains if no clients are associated. + * This configuration parameter specifies the nominal chain-mask that + * should be used when not operating with a reduced set of tx chains. + */ + __le32 tx_chain_mask; + + /* The nominal chain mask for receive. + * The chain mask may be modified dynamically, e.g. for a client to use + * a reduced number of chains for receive if the traffic to the client + * is low enough that it doesn't require downlink MIMO or antenna + * diversity. This configuration parameter specifies the nominal + * chain-mask that should be used when not operating with a reduced + * set of rx chains. + */ + __le32 rx_chain_mask; + + /* What rx reorder timeout (ms) to use for the AC. + * Each WMM access class (voice, video, best-effort, background) will + * have its own timeout value to dictate how long to wait for missing + * rx MPDUs to arrive before flushing subsequent MPDUs that have already + * been received. This parameter specifies the timeout in milliseconds + * for each class. + */ + __le32 rx_timeout_pri[4]; + + /* What mode the rx should decap packets to. + * MAC can decap to RAW (no decap), native wifi or Ethernet types. + * This setting also determines the default TX behavior, however TX + * behavior can be modified on a per VAP basis during VAP init + */ + __le32 rx_decap_mode; + + __le32 scan_max_pending_req; + + __le32 bmiss_offload_max_vdev; + + __le32 roam_offload_max_vdev; + + __le32 roam_offload_max_ap_profiles; + + /* How many groups to use for mcast->ucast conversion. + * The target's WAL maintains a table to hold information regarding + * which peers belong to a given multicast group, so that if + * multicast->unicast conversion is enabled, the target can convert + * multicast tx frames to a series of unicast tx frames, to each peer + * within the multicast group. This num_mcast_groups configuration + * parameter tells the target how many multicast groups to provide + * storage for within its multicast group membership table. + */ + __le32 num_mcast_groups; + + /* Size to alloc for the mcast membership table. + * This num_mcast_table_elems configuration parameter tells the target + * how many peer elements it needs to provide storage for in its + * multicast group membership table. These multicast group membership + * table elements are shared by the multicast groups stored within + * the table. + */ + __le32 num_mcast_table_elems; + + /* Whether/how to do multicast->unicast conversion. + * This configuration parameter specifies whether the target should + * perform multicast --> unicast conversion on transmit, and if so, + * what to do if it finds no entries in its multicast group membership + * table for the multicast IP address in the tx frame. + * Configuration value: + * 0 -> Do not perform multicast to unicast conversion. + * 1 -> Convert multicast frames to unicast, if the IP multicast address + * from the tx frame is found in the multicast group membership + * table. If the IP multicast address is not found, drop the frame + * 2 -> Convert multicast frames to unicast, if the IP multicast address + * from the tx frame is found in the multicast group membership + * table. If the IP multicast address is not found, transmit the + * frame as multicast. + */ + __le32 mcast2ucast_mode; + + /* How much memory to allocate for a tx PPDU dbg log. + * This parameter controls how much memory the target will allocate to + * store a log of tx PPDU meta-information (how large the PPDU was, + * when it was sent, whether it was successful, etc.) + */ + __le32 tx_dbg_log_size; + + /* How many AST entries to be allocated for WDS */ + __le32 num_wds_entries; + + /* MAC DMA burst size. 0 -default, 1 -256B */ + __le32 dma_burst_size; + + /* Fixed delimiters to be inserted after every MPDU to account for + * interface latency to avoid underrun. + */ + __le32 mac_aggr_delim; + + /* Determine whether target is responsible for detecting duplicate + * non-aggregate MPDU and timing out stale fragments. A-MPDU reordering + * is always performed on the target. + * + * 0: target responsible for frag timeout and dup checking + * 1: host responsible for frag timeout and dup checking + */ + __le32 rx_skip_defrag_timeout_dup_detection_check; + + /* Configuration for VoW : No of Video nodes to be supported and max + * no of descriptors for each video link (node). + */ + __le32 vow_config; + + /* Maximum vdev that could use gtk offload */ + __le32 gtk_offload_max_vdev; + + /* Number of msdu descriptors target should use */ + __le32 num_msdu_desc; + + /* Max number of tx fragments per MSDU. + * This parameter controls the max number of tx fragments per MSDU. + * This will passed by target as part of the WMI_SERVICE_READY event + * and is overridden by the OS shim as required. + */ + __le32 max_frag_entries; + + /* Max number of extended peer stats. + * This parameter controls the max number of peers for which extended + * statistics are supported by target + */ + __le32 max_peer_ext_stats; + + /* Smart antenna capabilities information. + * 1 - Smart antenna is enabled + * 0 - Smart antenna is disabled + * In future this can contain smart antenna specific capabilities. + */ + __le32 smart_ant_cap; + + /* User can configure the buffers allocated for each AC (BE, BK, VI, VO) + * during init. + */ + __le32 bk_minfree; + __le32 be_minfree; + __le32 vi_minfree; + __le32 vo_minfree; + + /* Rx batch mode capability. + * 1 - Rx batch mode enabled + * 0 - Rx batch mode disabled + */ + __le32 rx_batchmode; + + /* Thermal throttling capability. + * 1 - Capable of thermal throttling + * 0 - Not capable of thermal throttling + */ + __le32 tt_support; + + /* ATF configuration. + * 1 - Enable ATF + * 0 - Disable ATF + */ + __le32 atf_config; + + /* Configure padding to manage IP header un-alignment + * 1 - Enable padding + * 0 - Disable padding + */ + __le32 iphdr_pad_config; + + /* qwrap configuration (bits 15-0) + * 1 - This is qwrap configuration + * 0 - This is not qwrap + * + * Bits 31-16 is alloc_frag_desc_for_data_pkt (1 enables, 0 disables) + * In order to get ack-RSSI reporting and to specify the tx-rate for + * individual frames, this option must be enabled. This uses an extra + * 4 bytes per tx-msdu descriptor, so don't enable it unless you need it. + */ + __le32 qwrap_config; +} __packed; + +enum wmi_coex_version { + WMI_NO_COEX_VERSION_SUPPORT = 0, + /* 3 wire coex support*/ + WMI_COEX_VERSION_1 = 1, + /* 2.5 wire coex support*/ + WMI_COEX_VERSION_2 = 2, + /* 2.5 wire coex with duty cycle support */ + WMI_COEX_VERSION_3 = 3, + /* 4 wire coex support*/ + WMI_COEX_VERSION_4 = 4, +}; + +/** + * enum wmi_10_4_feature_mask - WMI 10.4 feature enable/disable flags + * @WMI_10_4_LTEU_SUPPORT: LTEU config + * @WMI_10_4_COEX_GPIO_SUPPORT: COEX GPIO config + * @WMI_10_4_AUX_RADIO_SPECTRAL_INTF: AUX Radio Enhancement for spectral scan + * @WMI_10_4_AUX_RADIO_CHAN_LOAD_INTF: AUX Radio Enhancement for chan load scan + * @WMI_10_4_BSS_CHANNEL_INFO_64: BSS channel info stats + * @WMI_10_4_PEER_STATS: Per station stats + * @WMI_10_4_VDEV_STATS: Per vdev stats + * @WMI_10_4_TDLS: Implicit TDLS support in firmware enable/disable + * @WMI_10_4_TDLS_OFFCHAN: TDLS offchannel support enable/disable + * @WMI_10_4_TDLS_UAPSD_BUFFER_STA: TDLS buffer sta support enable/disable + * @WMI_10_4_TDLS_UAPSD_SLEEP_STA: TDLS sleep sta support enable/disable + * @WMI_10_4_TDLS_CONN_TRACKER_IN_HOST_MODE: TDLS connection tracker in host + * enable/disable + * @WMI_10_4_TDLS_EXPLICIT_MODE_ONLY:Explicit TDLS mode enable/disable + * @WMI_10_4_TX_DATA_ACK_RSSI: Enable DATA ACK RSSI if firmware is capable + */ +enum wmi_10_4_feature_mask { + WMI_10_4_LTEU_SUPPORT = BIT(0), + WMI_10_4_COEX_GPIO_SUPPORT = BIT(1), + WMI_10_4_AUX_RADIO_SPECTRAL_INTF = BIT(2), + WMI_10_4_AUX_RADIO_CHAN_LOAD_INTF = BIT(3), + WMI_10_4_BSS_CHANNEL_INFO_64 = BIT(4), + WMI_10_4_PEER_STATS = BIT(5), + WMI_10_4_VDEV_STATS = BIT(6), + WMI_10_4_TDLS = BIT(7), + WMI_10_4_TDLS_OFFCHAN = BIT(8), + WMI_10_4_TDLS_UAPSD_BUFFER_STA = BIT(9), + WMI_10_4_TDLS_UAPSD_SLEEP_STA = BIT(10), + WMI_10_4_TDLS_CONN_TRACKER_IN_HOST_MODE = BIT(11), + WMI_10_4_TDLS_EXPLICIT_MODE_ONLY = BIT(12), + WMI_10_4_TX_DATA_ACK_RSSI = BIT(16), + WMI_10_4_EXT_PEER_TID_CONFIGS_SUPPORT = BIT(17), + WMI_10_4_REPORT_AIRTIME = BIT(18), + +}; + +struct wmi_ext_resource_config_10_4_cmd { + /* contains enum wmi_host_platform_type */ + __le32 host_platform_config; + /* see enum wmi_10_4_feature_mask */ + __le32 fw_feature_bitmap; + /* WLAN priority GPIO number */ + __le32 wlan_gpio_priority; + /* see enum wmi_coex_version */ + __le32 coex_version; + /* COEX GPIO config */ + __le32 coex_gpio_pin1; + __le32 coex_gpio_pin2; + __le32 coex_gpio_pin3; + /* number of vdevs allowed to perform tdls */ + __le32 num_tdls_vdevs; + /* number of peers to track per TDLS vdev */ + __le32 num_tdls_conn_table_entries; + /* number of tdls sleep sta supported */ + __le32 max_tdls_concurrent_sleep_sta; + /* number of tdls buffer sta supported */ + __le32 max_tdls_concurrent_buffer_sta; +}; + +/* structure describing host memory chunk. */ +struct host_memory_chunk { + /* id of the request that is passed up in service ready */ + __le32 req_id; + /* the physical address the memory chunk */ + __le32 ptr; + /* size of the chunk */ + __le32 size; +} __packed; + +struct wmi_host_mem_chunks { + __le32 count; + /* some fw revisions require at least 1 chunk regardless of count */ + struct host_memory_chunk items[1]; +} __packed; + +struct wmi_init_cmd { + struct wmi_resource_config resource_config; + struct wmi_host_mem_chunks mem_chunks; +} __packed; + +/* _10x structure is from 10.X FW API */ +struct wmi_init_cmd_10x { + struct wmi_resource_config_10x resource_config; + struct wmi_host_mem_chunks mem_chunks; +} __packed; + +struct wmi_init_cmd_10_2 { + struct wmi_resource_config_10_2 resource_config; + struct wmi_host_mem_chunks mem_chunks; +} __packed; + +struct wmi_init_cmd_10_4 { + struct wmi_resource_config_10_4 resource_config; + struct wmi_host_mem_chunks mem_chunks; +} __packed; + +struct wmi_chan_list_entry { + __le16 freq; + u8 phy_mode; /* valid for 10.2 only */ + u8 reserved; +} __packed; + +/* TLV for channel list */ +struct wmi_chan_list { + __le32 tag; /* WMI_CHAN_LIST_TAG */ + __le32 num_chan; + struct wmi_chan_list_entry channel_list[]; +} __packed; + +struct wmi_bssid_list { + __le32 tag; /* WMI_BSSID_LIST_TAG */ + __le32 num_bssid; + struct wmi_mac_addr bssid_list[]; +} __packed; + +struct wmi_ie_data { + __le32 tag; /* WMI_IE_TAG */ + __le32 ie_len; + u8 ie_data[]; +} __packed; + +struct wmi_ssid { + __le32 ssid_len; + u8 ssid[32]; +} __packed; + +struct wmi_ssid_list { + __le32 tag; /* WMI_SSID_LIST_TAG */ + __le32 num_ssids; + struct wmi_ssid ssids[]; +} __packed; + +/* prefix used by scan requestor ids on the host */ +#define WMI_HOST_SCAN_REQUESTOR_ID_PREFIX 0xA000 + +/* prefix used by scan request ids generated on the host */ +/* host cycles through the lower 12 bits to generate ids */ +#define WMI_HOST_SCAN_REQ_ID_PREFIX 0xA000 + +#define WLAN_SCAN_PARAMS_MAX_SSID 16 +#define WLAN_SCAN_PARAMS_MAX_BSSID 4 +#define WLAN_SCAN_PARAMS_MAX_IE_LEN 256 + +/* Values lower than this may be refused by some firmware revisions with a scan + * completion with a timedout reason. + */ +#define WMI_SCAN_CHAN_MIN_TIME_MSEC 40 + +/* Scan priority numbers must be sequential, starting with 0 */ +enum wmi_scan_priority { + WMI_SCAN_PRIORITY_VERY_LOW = 0, + WMI_SCAN_PRIORITY_LOW, + WMI_SCAN_PRIORITY_MEDIUM, + WMI_SCAN_PRIORITY_HIGH, + WMI_SCAN_PRIORITY_VERY_HIGH, + WMI_SCAN_PRIORITY_COUNT /* number of priorities supported */ +}; + +struct wmi_start_scan_common { + /* Scan ID */ + __le32 scan_id; + /* Scan requestor ID */ + __le32 scan_req_id; + /* VDEV id(interface) that is requesting scan */ + __le32 vdev_id; + /* Scan Priority, input to scan scheduler */ + __le32 scan_priority; + /* Scan events subscription */ + __le32 notify_scan_events; + /* dwell time in msec on active channels */ + __le32 dwell_time_active; + /* dwell time in msec on passive channels */ + __le32 dwell_time_passive; + /* + * min time in msec on the BSS channel,only valid if atleast one + * VDEV is active + */ + __le32 min_rest_time; + /* + * max rest time in msec on the BSS channel,only valid if at least + * one VDEV is active + */ + /* + * the scanner will rest on the bss channel at least min_rest_time + * after min_rest_time the scanner will start checking for tx/rx + * activity on all VDEVs. if there is no activity the scanner will + * switch to off channel. if there is activity the scanner will let + * the radio on the bss channel until max_rest_time expires.at + * max_rest_time scanner will switch to off channel irrespective of + * activity. activity is determined by the idle_time parameter. + */ + __le32 max_rest_time; + /* + * time before sending next set of probe requests. + * The scanner keeps repeating probe requests transmission with + * period specified by repeat_probe_time. + * The number of probe requests specified depends on the ssid_list + * and bssid_list + */ + __le32 repeat_probe_time; + /* time in msec between 2 consequetive probe requests with in a set. */ + __le32 probe_spacing_time; + /* + * data inactivity time in msec on bss channel that will be used by + * scanner for measuring the inactivity. + */ + __le32 idle_time; + /* maximum time in msec allowed for scan */ + __le32 max_scan_time; + /* + * delay in msec before sending first probe request after switching + * to a channel + */ + __le32 probe_delay; + /* Scan control flags */ + __le32 scan_ctrl_flags; +} __packed; + +struct wmi_start_scan_tlvs { + /* TLV parameters. These includes channel list, ssid list, bssid list, + * extra ies. + */ + u8 tlvs[0]; +} __packed; + +struct wmi_start_scan_cmd { + struct wmi_start_scan_common common; + __le32 burst_duration_ms; + struct wmi_start_scan_tlvs tlvs; +} __packed; + +/* This is the definition from 10.X firmware branch */ +struct wmi_10x_start_scan_cmd { + struct wmi_start_scan_common common; + struct wmi_start_scan_tlvs tlvs; +} __packed; + +struct wmi_ssid_arg { + int len; + const u8 *ssid; +}; + +struct wmi_bssid_arg { + const u8 *bssid; +}; + +struct wmi_start_scan_arg { + u32 scan_id; + u32 scan_req_id; + u32 vdev_id; + u32 scan_priority; + u32 notify_scan_events; + u32 dwell_time_active; + u32 dwell_time_passive; + u32 min_rest_time; + u32 max_rest_time; + u32 repeat_probe_time; + u32 probe_spacing_time; + u32 idle_time; + u32 max_scan_time; + u32 probe_delay; + u32 scan_ctrl_flags; + u32 burst_duration_ms; + + u32 ie_len; + u32 n_channels; + u32 n_ssids; + u32 n_bssids; + + u8 ie[WLAN_SCAN_PARAMS_MAX_IE_LEN]; + u16 channels[64]; + struct wmi_ssid_arg ssids[WLAN_SCAN_PARAMS_MAX_SSID]; + struct wmi_bssid_arg bssids[WLAN_SCAN_PARAMS_MAX_BSSID]; + struct wmi_mac_addr mac_addr; + struct wmi_mac_addr mac_mask; +}; + +/* scan control flags */ + +/* passively scan all channels including active channels */ +#define WMI_SCAN_FLAG_PASSIVE 0x1 +/* add wild card ssid probe request even though ssid_list is specified. */ +#define WMI_SCAN_ADD_BCAST_PROBE_REQ 0x2 +/* add cck rates to rates/xrate ie for the generated probe request */ +#define WMI_SCAN_ADD_CCK_RATES 0x4 +/* add ofdm rates to rates/xrate ie for the generated probe request */ +#define WMI_SCAN_ADD_OFDM_RATES 0x8 +/* To enable indication of Chan load and Noise floor to host */ +#define WMI_SCAN_CHAN_STAT_EVENT 0x10 +/* Filter Probe request frames */ +#define WMI_SCAN_FILTER_PROBE_REQ 0x20 +/* When set, DFS channels will not be scanned */ +#define WMI_SCAN_BYPASS_DFS_CHN 0x40 +/* Different FW scan engine may choose to bail out on errors. + * Allow the driver to have influence over that. + */ +#define WMI_SCAN_CONTINUE_ON_ERROR 0x80 + +/* Use random MAC address for TA for Probe Request frame and add + * OUI specified by WMI_SCAN_PROB_REQ_OUI_CMDID to the Probe Request frame. + * if OUI is not set by WMI_SCAN_PROB_REQ_OUI_CMDID then the flag is ignored. + */ +#define WMI_SCAN_ADD_SPOOFED_MAC_IN_PROBE_REQ 0x1000 + +/* WMI_SCAN_CLASS_MASK must be the same value as IEEE80211_SCAN_CLASS_MASK */ +#define WMI_SCAN_CLASS_MASK 0xFF000000 + +enum wmi_stop_scan_type { + WMI_SCAN_STOP_ONE = 0x00000000, /* stop by scan_id */ + WMI_SCAN_STOP_VDEV_ALL = 0x01000000, /* stop by vdev_id */ + WMI_SCAN_STOP_ALL = 0x04000000, /* stop all scans */ +}; + +struct wmi_stop_scan_cmd { + __le32 scan_req_id; + __le32 scan_id; + __le32 req_type; + __le32 vdev_id; +} __packed; + +struct wmi_stop_scan_arg { + u32 req_id; + enum wmi_stop_scan_type req_type; + union { + u32 scan_id; + u32 vdev_id; + } u; +}; + +struct wmi_scan_chan_list_cmd { + __le32 num_scan_chans; + struct wmi_channel chan_info[]; +} __packed; + +struct wmi_scan_chan_list_arg { + u32 n_channels; + struct wmi_channel_arg *channels; +}; + +enum wmi_bss_filter { + WMI_BSS_FILTER_NONE = 0, /* no beacons forwarded */ + WMI_BSS_FILTER_ALL, /* all beacons forwarded */ + WMI_BSS_FILTER_PROFILE, /* only beacons matching profile */ + WMI_BSS_FILTER_ALL_BUT_PROFILE, /* all but beacons matching profile */ + WMI_BSS_FILTER_CURRENT_BSS, /* only beacons matching current BSS */ + WMI_BSS_FILTER_ALL_BUT_BSS, /* all but beacons matching BSS */ + WMI_BSS_FILTER_PROBED_SSID, /* beacons matching probed ssid */ + WMI_BSS_FILTER_LAST_BSS, /* marker only */ +}; + +enum wmi_scan_event_type { + WMI_SCAN_EVENT_STARTED = BIT(0), + WMI_SCAN_EVENT_COMPLETED = BIT(1), + WMI_SCAN_EVENT_BSS_CHANNEL = BIT(2), + WMI_SCAN_EVENT_FOREIGN_CHANNEL = BIT(3), + WMI_SCAN_EVENT_DEQUEUED = BIT(4), + /* possibly by high-prio scan */ + WMI_SCAN_EVENT_PREEMPTED = BIT(5), + WMI_SCAN_EVENT_START_FAILED = BIT(6), + WMI_SCAN_EVENT_RESTARTED = BIT(7), + WMI_SCAN_EVENT_FOREIGN_CHANNEL_EXIT = BIT(8), + WMI_SCAN_EVENT_MAX = BIT(15), +}; + +enum wmi_scan_completion_reason { + WMI_SCAN_REASON_COMPLETED, + WMI_SCAN_REASON_CANCELLED, + WMI_SCAN_REASON_PREEMPTED, + WMI_SCAN_REASON_TIMEDOUT, + WMI_SCAN_REASON_INTERNAL_FAILURE, + WMI_SCAN_REASON_MAX, +}; + +struct wmi_scan_event { + __le32 event_type; /* %WMI_SCAN_EVENT_ */ + __le32 reason; /* %WMI_SCAN_REASON_ */ + __le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */ + __le32 scan_req_id; + __le32 scan_id; + __le32 vdev_id; +} __packed; + +/* + * This defines how much headroom is kept in the + * receive frame between the descriptor and the + * payload, in order for the WMI PHY error and + * management handler to insert header contents. + * + * This is in bytes. + */ +#define WMI_MGMT_RX_HDR_HEADROOM 52 + +/* + * This event will be used for sending scan results + * as well as rx mgmt frames to the host. The rx buffer + * will be sent as part of this WMI event. It would be a + * good idea to pass all the fields in the RX status + * descriptor up to the host. + */ +struct wmi_mgmt_rx_hdr_v1 { + __le32 channel; + __le32 snr; + __le32 rate; + __le32 phy_mode; + __le32 buf_len; + __le32 status; /* %WMI_RX_STATUS_ */ +} __packed; + +struct wmi_mgmt_rx_hdr_v2 { + struct wmi_mgmt_rx_hdr_v1 v1; + __le32 rssi_ctl[4]; +} __packed; + +struct wmi_mgmt_rx_event_v1 { + struct wmi_mgmt_rx_hdr_v1 hdr; + u8 buf[]; +} __packed; + +struct wmi_mgmt_rx_event_v2 { + struct wmi_mgmt_rx_hdr_v2 hdr; + u8 buf[]; +} __packed; + +struct wmi_10_4_mgmt_rx_hdr { + __le32 channel; + __le32 snr; + u8 rssi_ctl[4]; + __le32 rate; + __le32 phy_mode; + __le32 buf_len; + __le32 status; +} __packed; + +struct wmi_10_4_mgmt_rx_event { + struct wmi_10_4_mgmt_rx_hdr hdr; + u8 buf[]; +} __packed; + +struct wmi_mgmt_rx_ext_info { + __le64 rx_mac_timestamp; +} __packed __aligned(4); + +#define WMI_RX_STATUS_OK 0x00 +#define WMI_RX_STATUS_ERR_CRC 0x01 +#define WMI_RX_STATUS_ERR_DECRYPT 0x08 +#define WMI_RX_STATUS_ERR_MIC 0x10 +#define WMI_RX_STATUS_ERR_KEY_CACHE_MISS 0x20 +/* Extension data at the end of mgmt frame */ +#define WMI_RX_STATUS_EXT_INFO 0x40 + +#define PHY_ERROR_GEN_SPECTRAL_SCAN 0x26 +#define PHY_ERROR_GEN_FALSE_RADAR_EXT 0x24 +#define PHY_ERROR_GEN_RADAR 0x05 + +#define PHY_ERROR_10_4_RADAR_MASK 0x4 +#define PHY_ERROR_10_4_SPECTRAL_SCAN_MASK 0x4000000 + +enum phy_err_type { + PHY_ERROR_UNKNOWN, + PHY_ERROR_SPECTRAL_SCAN, + PHY_ERROR_FALSE_RADAR_EXT, + PHY_ERROR_RADAR +}; + +struct wmi_phyerr { + __le32 tsf_timestamp; + __le16 freq1; + __le16 freq2; + u8 rssi_combined; + u8 chan_width_mhz; + u8 phy_err_code; + u8 rsvd0; + __le32 rssi_chains[4]; + __le16 nf_chains[4]; + __le32 buf_len; + u8 buf[]; +} __packed; + +struct wmi_phyerr_event { + __le32 num_phyerrs; + __le32 tsf_l32; + __le32 tsf_u32; + struct wmi_phyerr phyerrs[]; +} __packed; + +struct wmi_10_4_phyerr_event { + __le32 tsf_l32; + __le32 tsf_u32; + __le16 freq1; + __le16 freq2; + u8 rssi_combined; + u8 chan_width_mhz; + u8 phy_err_code; + u8 rsvd0; + __le32 rssi_chains[4]; + __le16 nf_chains[4]; + __le32 phy_err_mask[2]; + __le32 tsf_timestamp; + __le32 buf_len; + u8 buf[]; +} __packed; + +struct wmi_radar_found_info { + __le32 pri_min; + __le32 pri_max; + __le32 width_min; + __le32 width_max; + __le32 sidx_min; + __le32 sidx_max; +} __packed; + +enum wmi_radar_confirmation_status { + /* Detected radar was due to SW pulses */ + WMI_SW_RADAR_DETECTED = 0, + + WMI_RADAR_DETECTION_FAIL = 1, + + /* Real radar detected */ + WMI_HW_RADAR_DETECTED = 2, +}; + +#define PHYERR_TLV_SIG 0xBB +#define PHYERR_TLV_TAG_SEARCH_FFT_REPORT 0xFB +#define PHYERR_TLV_TAG_RADAR_PULSE_SUMMARY 0xF8 +#define PHYERR_TLV_TAG_SPECTRAL_SUMMARY_REPORT 0xF9 + +struct phyerr_radar_report { + __le32 reg0; /* RADAR_REPORT_REG0_* */ + __le32 reg1; /* RADAR_REPORT_REG1_* */ +} __packed; + +#define RADAR_REPORT_REG0_PULSE_IS_CHIRP_MASK 0x80000000 +#define RADAR_REPORT_REG0_PULSE_IS_CHIRP_LSB 31 + +#define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_MASK 0x40000000 +#define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_LSB 30 + +#define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_MASK 0x3FF00000 +#define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_LSB 20 + +#define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_MASK 0x000F0000 +#define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_LSB 16 + +#define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_MASK 0x0000FC00 +#define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_LSB 10 + +#define RADAR_REPORT_REG0_PULSE_SIDX_MASK 0x000003FF +#define RADAR_REPORT_REG0_PULSE_SIDX_LSB 0 + +#define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_MASK 0x80000000 +#define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_LSB 31 + +#define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_MASK 0x7F000000 +#define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_LSB 24 + +#define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_MASK 0x00FF0000 +#define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_LSB 16 + +#define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_MASK 0x0000FF00 +#define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_LSB 8 + +#define RADAR_REPORT_REG1_PULSE_DUR_MASK 0x000000FF +#define RADAR_REPORT_REG1_PULSE_DUR_LSB 0 + +struct phyerr_fft_report { + __le32 reg0; /* SEARCH_FFT_REPORT_REG0_ * */ + __le32 reg1; /* SEARCH_FFT_REPORT_REG1_ * */ +} __packed; + +#define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_MASK 0xFF800000 +#define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_LSB 23 + +#define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_MASK 0x007FC000 +#define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_LSB 14 + +#define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_MASK 0x00003000 +#define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_LSB 12 + +#define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_MASK 0x00000FFF +#define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_LSB 0 + +#define SEARCH_FFT_REPORT_REG1_RELPWR_DB_MASK 0xFC000000 +#define SEARCH_FFT_REPORT_REG1_RELPWR_DB_LSB 26 + +#define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_MASK 0x03FC0000 +#define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_LSB 18 + +#define SEARCH_FFT_REPORT_REG1_PEAK_MAG_MASK 0x0003FF00 +#define SEARCH_FFT_REPORT_REG1_PEAK_MAG_LSB 8 + +#define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_MASK 0x000000FF +#define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_LSB 0 + +struct phyerr_tlv { + __le16 len; + u8 tag; + u8 sig; +} __packed; + +#define DFS_RSSI_POSSIBLY_FALSE 50 +#define DFS_PEAK_MAG_THOLD_POSSIBLY_FALSE 40 + +struct wmi_mgmt_tx_hdr { + __le32 vdev_id; + struct wmi_mac_addr peer_macaddr; + __le32 tx_rate; + __le32 tx_power; + __le32 buf_len; +} __packed; + +struct wmi_mgmt_tx_cmd { + struct wmi_mgmt_tx_hdr hdr; + u8 buf[]; +} __packed; + +struct wmi_echo_event { + __le32 value; +} __packed; + +struct wmi_echo_cmd { + __le32 value; +} __packed; + +struct wmi_pdev_set_regdomain_cmd { + __le32 reg_domain; + __le32 reg_domain_2G; + __le32 reg_domain_5G; + __le32 conformance_test_limit_2G; + __le32 conformance_test_limit_5G; +} __packed; + +enum wmi_dfs_region { + /* Uninitialized dfs domain */ + WMI_UNINIT_DFS_DOMAIN = 0, + + /* FCC3 dfs domain */ + WMI_FCC_DFS_DOMAIN = 1, + + /* ETSI dfs domain */ + WMI_ETSI_DFS_DOMAIN = 2, + + /*Japan dfs domain */ + WMI_MKK4_DFS_DOMAIN = 3, +}; + +struct wmi_pdev_set_regdomain_cmd_10x { + __le32 reg_domain; + __le32 reg_domain_2G; + __le32 reg_domain_5G; + __le32 conformance_test_limit_2G; + __le32 conformance_test_limit_5G; + + /* dfs domain from wmi_dfs_region */ + __le32 dfs_domain; +} __packed; + +/* Command to set/unset chip in quiet mode */ +struct wmi_pdev_set_quiet_cmd { + /* period in TUs */ + __le32 period; + + /* duration in TUs */ + __le32 duration; + + /* offset in TUs */ + __le32 next_start; + + /* enable/disable */ + __le32 enabled; +} __packed; + +/* + * 802.11g protection mode. + */ +enum ath10k_protmode { + ATH10K_PROT_NONE = 0, /* no protection */ + ATH10K_PROT_CTSONLY = 1, /* CTS to self */ + ATH10K_PROT_RTSCTS = 2, /* RTS-CTS */ +}; + +enum wmi_rtscts_profile { + WMI_RTSCTS_FOR_NO_RATESERIES = 0, + WMI_RTSCTS_FOR_SECOND_RATESERIES, + WMI_RTSCTS_ACROSS_SW_RETRIES +}; + +#define WMI_RTSCTS_ENABLED 1 +#define WMI_RTSCTS_SET_MASK 0x0f +#define WMI_RTSCTS_SET_LSB 0 + +#define WMI_RTSCTS_PROFILE_MASK 0xf0 +#define WMI_RTSCTS_PROFILE_LSB 4 + +enum wmi_beacon_gen_mode { + WMI_BEACON_STAGGERED_MODE = 0, + WMI_BEACON_BURST_MODE = 1 +}; + +enum wmi_csa_event_ies_present_flag { + WMI_CSA_IE_PRESENT = 0x00000001, + WMI_XCSA_IE_PRESENT = 0x00000002, + WMI_WBW_IE_PRESENT = 0x00000004, + WMI_CSWARP_IE_PRESENT = 0x00000008, +}; + +/* wmi CSA receive event from beacon frame */ +struct wmi_csa_event { + __le32 i_fc_dur; + /* Bit 0-15: FC */ + /* Bit 16-31: DUR */ + struct wmi_mac_addr i_addr1; + struct wmi_mac_addr i_addr2; + __le32 csa_ie[2]; + __le32 xcsa_ie[2]; + __le32 wb_ie[2]; + __le32 cswarp_ie; + __le32 ies_present_flag; /* wmi_csa_event_ies_present_flag */ +} __packed; + +/* the definition of different PDEV parameters */ +#define PDEV_DEFAULT_STATS_UPDATE_PERIOD 500 +#define VDEV_DEFAULT_STATS_UPDATE_PERIOD 500 +#define PEER_DEFAULT_STATS_UPDATE_PERIOD 500 + +struct wmi_pdev_param_map { + u32 tx_chain_mask; + u32 rx_chain_mask; + u32 txpower_limit2g; + u32 txpower_limit5g; + u32 txpower_scale; + u32 beacon_gen_mode; + u32 beacon_tx_mode; + u32 resmgr_offchan_mode; + u32 protection_mode; + u32 dynamic_bw; + u32 non_agg_sw_retry_th; + u32 agg_sw_retry_th; + u32 sta_kickout_th; + u32 ac_aggrsize_scaling; + u32 ltr_enable; + u32 ltr_ac_latency_be; + u32 ltr_ac_latency_bk; + u32 ltr_ac_latency_vi; + u32 ltr_ac_latency_vo; + u32 ltr_ac_latency_timeout; + u32 ltr_sleep_override; + u32 ltr_rx_override; + u32 ltr_tx_activity_timeout; + u32 l1ss_enable; + u32 dsleep_enable; + u32 pcielp_txbuf_flush; + u32 pcielp_txbuf_watermark; + u32 pcielp_txbuf_tmo_en; + u32 pcielp_txbuf_tmo_value; + u32 pdev_stats_update_period; + u32 vdev_stats_update_period; + u32 peer_stats_update_period; + u32 bcnflt_stats_update_period; + u32 pmf_qos; + u32 arp_ac_override; + u32 dcs; + u32 ani_enable; + u32 ani_poll_period; + u32 ani_listen_period; + u32 ani_ofdm_level; + u32 ani_cck_level; + u32 dyntxchain; + u32 proxy_sta; + u32 idle_ps_config; + u32 power_gating_sleep; + u32 fast_channel_reset; + u32 burst_dur; + u32 burst_enable; + u32 cal_period; + u32 aggr_burst; + u32 rx_decap_mode; + u32 smart_antenna_default_antenna; + u32 igmpmld_override; + u32 igmpmld_tid; + u32 antenna_gain; + u32 rx_filter; + u32 set_mcast_to_ucast_tid; + u32 proxy_sta_mode; + u32 set_mcast2ucast_mode; + u32 set_mcast2ucast_buffer; + u32 remove_mcast2ucast_buffer; + u32 peer_sta_ps_statechg_enable; + u32 igmpmld_ac_override; + u32 block_interbss; + u32 set_disable_reset_cmdid; + u32 set_msdu_ttl_cmdid; + u32 set_ppdu_duration_cmdid; + u32 txbf_sound_period_cmdid; + u32 set_promisc_mode_cmdid; + u32 set_burst_mode_cmdid; + u32 en_stats; + u32 mu_group_policy; + u32 noise_detection; + u32 noise_threshold; + u32 dpd_enable; + u32 set_mcast_bcast_echo; + u32 atf_strict_sch; + u32 atf_sched_duration; + u32 ant_plzn; + u32 mgmt_retry_limit; + u32 sensitivity_level; + u32 signed_txpower_2g; + u32 signed_txpower_5g; + u32 enable_per_tid_amsdu; + u32 enable_per_tid_ampdu; + u32 cca_threshold; + u32 rts_fixed_rate; + u32 pdev_reset; + u32 wapi_mbssid_offset; + u32 arp_srcaddr; + u32 arp_dstaddr; + u32 enable_btcoex; + u32 rfkill_config; + u32 rfkill_enable; + u32 peer_stats_info_enable; +}; + +#define WMI_PDEV_PARAM_UNSUPPORTED 0 + +enum wmi_pdev_param { + /* TX chain mask */ + WMI_PDEV_PARAM_TX_CHAIN_MASK = 0x1, + /* RX chain mask */ + WMI_PDEV_PARAM_RX_CHAIN_MASK, + /* TX power limit for 2G Radio */ + WMI_PDEV_PARAM_TXPOWER_LIMIT2G, + /* TX power limit for 5G Radio */ + WMI_PDEV_PARAM_TXPOWER_LIMIT5G, + /* TX power scale */ + WMI_PDEV_PARAM_TXPOWER_SCALE, + /* Beacon generation mode . 0: host, 1: target */ + WMI_PDEV_PARAM_BEACON_GEN_MODE, + /* Beacon generation mode . 0: staggered 1: bursted */ + WMI_PDEV_PARAM_BEACON_TX_MODE, + /* + * Resource manager off chan mode . + * 0: turn off off chan mode. 1: turn on offchan mode + */ + WMI_PDEV_PARAM_RESMGR_OFFCHAN_MODE, + /* + * Protection mode: + * 0: no protection 1:use CTS-to-self 2: use RTS/CTS + */ + WMI_PDEV_PARAM_PROTECTION_MODE, + /* + * Dynamic bandwidth - 0: disable, 1: enable + * + * When enabled HW rate control tries different bandwidths when + * retransmitting frames. + */ + WMI_PDEV_PARAM_DYNAMIC_BW, + /* Non aggregrate/ 11g sw retry threshold.0-disable */ + WMI_PDEV_PARAM_NON_AGG_SW_RETRY_TH, + /* aggregrate sw retry threshold. 0-disable*/ + WMI_PDEV_PARAM_AGG_SW_RETRY_TH, + /* Station kickout threshold (non of consecutive failures).0-disable */ + WMI_PDEV_PARAM_STA_KICKOUT_TH, + /* Aggerate size scaling configuration per AC */ + WMI_PDEV_PARAM_AC_AGGRSIZE_SCALING, + /* LTR enable */ + WMI_PDEV_PARAM_LTR_ENABLE, + /* LTR latency for BE, in us */ + WMI_PDEV_PARAM_LTR_AC_LATENCY_BE, + /* LTR latency for BK, in us */ + WMI_PDEV_PARAM_LTR_AC_LATENCY_BK, + /* LTR latency for VI, in us */ + WMI_PDEV_PARAM_LTR_AC_LATENCY_VI, + /* LTR latency for VO, in us */ + WMI_PDEV_PARAM_LTR_AC_LATENCY_VO, + /* LTR AC latency timeout, in ms */ + WMI_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT, + /* LTR platform latency override, in us */ + WMI_PDEV_PARAM_LTR_SLEEP_OVERRIDE, + /* LTR-RX override, in us */ + WMI_PDEV_PARAM_LTR_RX_OVERRIDE, + /* Tx activity timeout for LTR, in us */ + WMI_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT, + /* L1SS state machine enable */ + WMI_PDEV_PARAM_L1SS_ENABLE, + /* Deep sleep state machine enable */ + WMI_PDEV_PARAM_DSLEEP_ENABLE, + /* RX buffering flush enable */ + WMI_PDEV_PARAM_PCIELP_TXBUF_FLUSH, + /* RX buffering matermark */ + WMI_PDEV_PARAM_PCIELP_TXBUF_WATERMARK, + /* RX buffering timeout enable */ + WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_EN, + /* RX buffering timeout value */ + WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE, + /* pdev level stats update period in ms */ + WMI_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD, + /* vdev level stats update period in ms */ + WMI_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD, + /* peer level stats update period in ms */ + WMI_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD, + /* beacon filter status update period */ + WMI_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD, + /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */ + WMI_PDEV_PARAM_PMF_QOS, + /* Access category on which ARP frames are sent */ + WMI_PDEV_PARAM_ARP_AC_OVERRIDE, + /* DCS configuration */ + WMI_PDEV_PARAM_DCS, + /* Enable/Disable ANI on target */ + WMI_PDEV_PARAM_ANI_ENABLE, + /* configure the ANI polling period */ + WMI_PDEV_PARAM_ANI_POLL_PERIOD, + /* configure the ANI listening period */ + WMI_PDEV_PARAM_ANI_LISTEN_PERIOD, + /* configure OFDM immunity level */ + WMI_PDEV_PARAM_ANI_OFDM_LEVEL, + /* configure CCK immunity level */ + WMI_PDEV_PARAM_ANI_CCK_LEVEL, + /* Enable/Disable CDD for 1x1 STAs in rate control module */ + WMI_PDEV_PARAM_DYNTXCHAIN, + /* Enable/Disable proxy STA */ + WMI_PDEV_PARAM_PROXY_STA, + /* Enable/Disable low power state when all VDEVs are inactive/idle. */ + WMI_PDEV_PARAM_IDLE_PS_CONFIG, + /* Enable/Disable power gating sleep */ + WMI_PDEV_PARAM_POWER_GATING_SLEEP, +}; + +enum wmi_10x_pdev_param { + /* TX chian mask */ + WMI_10X_PDEV_PARAM_TX_CHAIN_MASK = 0x1, + /* RX chian mask */ + WMI_10X_PDEV_PARAM_RX_CHAIN_MASK, + /* TX power limit for 2G Radio */ + WMI_10X_PDEV_PARAM_TXPOWER_LIMIT2G, + /* TX power limit for 5G Radio */ + WMI_10X_PDEV_PARAM_TXPOWER_LIMIT5G, + /* TX power scale */ + WMI_10X_PDEV_PARAM_TXPOWER_SCALE, + /* Beacon generation mode . 0: host, 1: target */ + WMI_10X_PDEV_PARAM_BEACON_GEN_MODE, + /* Beacon generation mode . 0: staggered 1: bursted */ + WMI_10X_PDEV_PARAM_BEACON_TX_MODE, + /* + * Resource manager off chan mode . + * 0: turn off off chan mode. 1: turn on offchan mode + */ + WMI_10X_PDEV_PARAM_RESMGR_OFFCHAN_MODE, + /* + * Protection mode: + * 0: no protection 1:use CTS-to-self 2: use RTS/CTS + */ + WMI_10X_PDEV_PARAM_PROTECTION_MODE, + /* Dynamic bandwidth 0: disable 1: enable */ + WMI_10X_PDEV_PARAM_DYNAMIC_BW, + /* Non aggregrate/ 11g sw retry threshold.0-disable */ + WMI_10X_PDEV_PARAM_NON_AGG_SW_RETRY_TH, + /* aggregrate sw retry threshold. 0-disable*/ + WMI_10X_PDEV_PARAM_AGG_SW_RETRY_TH, + /* Station kickout threshold (non of consecutive failures).0-disable */ + WMI_10X_PDEV_PARAM_STA_KICKOUT_TH, + /* Aggerate size scaling configuration per AC */ + WMI_10X_PDEV_PARAM_AC_AGGRSIZE_SCALING, + /* LTR enable */ + WMI_10X_PDEV_PARAM_LTR_ENABLE, + /* LTR latency for BE, in us */ + WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BE, + /* LTR latency for BK, in us */ + WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BK, + /* LTR latency for VI, in us */ + WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VI, + /* LTR latency for VO, in us */ + WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VO, + /* LTR AC latency timeout, in ms */ + WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT, + /* LTR platform latency override, in us */ + WMI_10X_PDEV_PARAM_LTR_SLEEP_OVERRIDE, + /* LTR-RX override, in us */ + WMI_10X_PDEV_PARAM_LTR_RX_OVERRIDE, + /* Tx activity timeout for LTR, in us */ + WMI_10X_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT, + /* L1SS state machine enable */ + WMI_10X_PDEV_PARAM_L1SS_ENABLE, + /* Deep sleep state machine enable */ + WMI_10X_PDEV_PARAM_DSLEEP_ENABLE, + /* pdev level stats update period in ms */ + WMI_10X_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD, + /* vdev level stats update period in ms */ + WMI_10X_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD, + /* peer level stats update period in ms */ + WMI_10X_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD, + /* beacon filter status update period */ + WMI_10X_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD, + /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */ + WMI_10X_PDEV_PARAM_PMF_QOS, + /* Access category on which ARP and DHCP frames are sent */ + WMI_10X_PDEV_PARAM_ARPDHCP_AC_OVERRIDE, + /* DCS configuration */ + WMI_10X_PDEV_PARAM_DCS, + /* Enable/Disable ANI on target */ + WMI_10X_PDEV_PARAM_ANI_ENABLE, + /* configure the ANI polling period */ + WMI_10X_PDEV_PARAM_ANI_POLL_PERIOD, + /* configure the ANI listening period */ + WMI_10X_PDEV_PARAM_ANI_LISTEN_PERIOD, + /* configure OFDM immunity level */ + WMI_10X_PDEV_PARAM_ANI_OFDM_LEVEL, + /* configure CCK immunity level */ + WMI_10X_PDEV_PARAM_ANI_CCK_LEVEL, + /* Enable/Disable CDD for 1x1 STAs in rate control module */ + WMI_10X_PDEV_PARAM_DYNTXCHAIN, + /* Enable/Disable Fast channel reset*/ + WMI_10X_PDEV_PARAM_FAST_CHANNEL_RESET, + /* Set Bursting DUR */ + WMI_10X_PDEV_PARAM_BURST_DUR, + /* Set Bursting Enable*/ + WMI_10X_PDEV_PARAM_BURST_ENABLE, + + /* following are available as of firmware 10.2 */ + WMI_10X_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA, + WMI_10X_PDEV_PARAM_IGMPMLD_OVERRIDE, + WMI_10X_PDEV_PARAM_IGMPMLD_TID, + WMI_10X_PDEV_PARAM_ANTENNA_GAIN, + WMI_10X_PDEV_PARAM_RX_DECAP_MODE, + WMI_10X_PDEV_PARAM_RX_FILTER, + WMI_10X_PDEV_PARAM_SET_MCAST_TO_UCAST_TID, + WMI_10X_PDEV_PARAM_PROXY_STA_MODE, + WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_MODE, + WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_BUFFER, + WMI_10X_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER, + WMI_10X_PDEV_PARAM_PEER_STA_PS_STATECHG_ENABLE, + WMI_10X_PDEV_PARAM_RTS_FIXED_RATE, + WMI_10X_PDEV_PARAM_CAL_PERIOD, + WMI_10X_PDEV_PARAM_ATF_STRICT_SCH, + WMI_10X_PDEV_PARAM_ATF_SCHED_DURATION, + WMI_10X_PDEV_PARAM_SET_PROMISC_MODE_CMDID, + WMI_10X_PDEV_PARAM_PDEV_RESET +}; + +enum wmi_10_4_pdev_param { + WMI_10_4_PDEV_PARAM_TX_CHAIN_MASK = 0x1, + WMI_10_4_PDEV_PARAM_RX_CHAIN_MASK, + WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT2G, + WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT5G, + WMI_10_4_PDEV_PARAM_TXPOWER_SCALE, + WMI_10_4_PDEV_PARAM_BEACON_GEN_MODE, + WMI_10_4_PDEV_PARAM_BEACON_TX_MODE, + WMI_10_4_PDEV_PARAM_RESMGR_OFFCHAN_MODE, + WMI_10_4_PDEV_PARAM_PROTECTION_MODE, + WMI_10_4_PDEV_PARAM_DYNAMIC_BW, + WMI_10_4_PDEV_PARAM_NON_AGG_SW_RETRY_TH, + WMI_10_4_PDEV_PARAM_AGG_SW_RETRY_TH, + WMI_10_4_PDEV_PARAM_STA_KICKOUT_TH, + WMI_10_4_PDEV_PARAM_AC_AGGRSIZE_SCALING, + WMI_10_4_PDEV_PARAM_LTR_ENABLE, + WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BE, + WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BK, + WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VI, + WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VO, + WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT, + WMI_10_4_PDEV_PARAM_LTR_SLEEP_OVERRIDE, + WMI_10_4_PDEV_PARAM_LTR_RX_OVERRIDE, + WMI_10_4_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT, + WMI_10_4_PDEV_PARAM_L1SS_ENABLE, + WMI_10_4_PDEV_PARAM_DSLEEP_ENABLE, + WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_FLUSH, + WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_WATERMARK, + WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_EN, + WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE, + WMI_10_4_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD, + WMI_10_4_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD, + WMI_10_4_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD, + WMI_10_4_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD, + WMI_10_4_PDEV_PARAM_PMF_QOS, + WMI_10_4_PDEV_PARAM_ARP_AC_OVERRIDE, + WMI_10_4_PDEV_PARAM_DCS, + WMI_10_4_PDEV_PARAM_ANI_ENABLE, + WMI_10_4_PDEV_PARAM_ANI_POLL_PERIOD, + WMI_10_4_PDEV_PARAM_ANI_LISTEN_PERIOD, + WMI_10_4_PDEV_PARAM_ANI_OFDM_LEVEL, + WMI_10_4_PDEV_PARAM_ANI_CCK_LEVEL, + WMI_10_4_PDEV_PARAM_DYNTXCHAIN, + WMI_10_4_PDEV_PARAM_PROXY_STA, + WMI_10_4_PDEV_PARAM_IDLE_PS_CONFIG, + WMI_10_4_PDEV_PARAM_POWER_GATING_SLEEP, + WMI_10_4_PDEV_PARAM_AGGR_BURST, + WMI_10_4_PDEV_PARAM_RX_DECAP_MODE, + WMI_10_4_PDEV_PARAM_FAST_CHANNEL_RESET, + WMI_10_4_PDEV_PARAM_BURST_DUR, + WMI_10_4_PDEV_PARAM_BURST_ENABLE, + WMI_10_4_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA, + WMI_10_4_PDEV_PARAM_IGMPMLD_OVERRIDE, + WMI_10_4_PDEV_PARAM_IGMPMLD_TID, + WMI_10_4_PDEV_PARAM_ANTENNA_GAIN, + WMI_10_4_PDEV_PARAM_RX_FILTER, + WMI_10_4_PDEV_SET_MCAST_TO_UCAST_TID, + WMI_10_4_PDEV_PARAM_PROXY_STA_MODE, + WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_MODE, + WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_BUFFER, + WMI_10_4_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER, + WMI_10_4_PDEV_PEER_STA_PS_STATECHG_ENABLE, + WMI_10_4_PDEV_PARAM_IGMPMLD_AC_OVERRIDE, + WMI_10_4_PDEV_PARAM_BLOCK_INTERBSS, + WMI_10_4_PDEV_PARAM_SET_DISABLE_RESET_CMDID, + WMI_10_4_PDEV_PARAM_SET_MSDU_TTL_CMDID, + WMI_10_4_PDEV_PARAM_SET_PPDU_DURATION_CMDID, + WMI_10_4_PDEV_PARAM_TXBF_SOUND_PERIOD_CMDID, + WMI_10_4_PDEV_PARAM_SET_PROMISC_MODE_CMDID, + WMI_10_4_PDEV_PARAM_SET_BURST_MODE_CMDID, + WMI_10_4_PDEV_PARAM_EN_STATS, + WMI_10_4_PDEV_PARAM_MU_GROUP_POLICY, + WMI_10_4_PDEV_PARAM_NOISE_DETECTION, + WMI_10_4_PDEV_PARAM_NOISE_THRESHOLD, + WMI_10_4_PDEV_PARAM_DPD_ENABLE, + WMI_10_4_PDEV_PARAM_SET_MCAST_BCAST_ECHO, + WMI_10_4_PDEV_PARAM_ATF_STRICT_SCH, + WMI_10_4_PDEV_PARAM_ATF_SCHED_DURATION, + WMI_10_4_PDEV_PARAM_ANT_PLZN, + WMI_10_4_PDEV_PARAM_MGMT_RETRY_LIMIT, + WMI_10_4_PDEV_PARAM_SENSITIVITY_LEVEL, + WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_2G, + WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_5G, + WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMSDU, + WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMPDU, + WMI_10_4_PDEV_PARAM_CCA_THRESHOLD, + WMI_10_4_PDEV_PARAM_RTS_FIXED_RATE, + WMI_10_4_PDEV_PARAM_CAL_PERIOD, + WMI_10_4_PDEV_PARAM_PDEV_RESET, + WMI_10_4_PDEV_PARAM_WAPI_MBSSID_OFFSET, + WMI_10_4_PDEV_PARAM_ARP_SRCADDR, + WMI_10_4_PDEV_PARAM_ARP_DSTADDR, + WMI_10_4_PDEV_PARAM_TXPOWER_DECR_DB, + WMI_10_4_PDEV_PARAM_RX_BATCHMODE, + WMI_10_4_PDEV_PARAM_PACKET_AGGR_DELAY, + WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCH, + WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCALING_FACTOR, + WMI_10_4_PDEV_PARAM_CUST_TXPOWER_SCALE, + WMI_10_4_PDEV_PARAM_ATF_DYNAMIC_ENABLE, + WMI_10_4_PDEV_PARAM_ATF_SSID_GROUP_POLICY, + WMI_10_4_PDEV_PARAM_ENABLE_BTCOEX, +}; + +struct wmi_pdev_set_param_cmd { + __le32 param_id; + __le32 param_value; +} __packed; + +struct wmi_pdev_set_base_macaddr_cmd { + struct wmi_mac_addr mac_addr; +} __packed; + +/* valid period is 1 ~ 60000ms, unit in millisecond */ +#define WMI_PDEV_PARAM_CAL_PERIOD_MAX 60000 + +struct wmi_pdev_get_tpc_config_cmd { + /* parameter */ + __le32 param; +} __packed; + +#define WMI_TPC_CONFIG_PARAM 1 +#define WMI_TPC_FINAL_RATE_MAX 240 +#define WMI_TPC_TX_N_CHAIN 4 +#define WMI_TPC_RATE_MAX (WMI_TPC_TX_N_CHAIN * 65) +#define WMI_TPC_PREAM_TABLE_MAX 10 +#define WMI_TPC_FLAG 3 +#define WMI_TPC_BUF_SIZE 10 +#define WMI_TPC_BEAMFORMING 2 + +enum wmi_tpc_table_type { + WMI_TPC_TABLE_TYPE_CDD = 0, + WMI_TPC_TABLE_TYPE_STBC = 1, + WMI_TPC_TABLE_TYPE_TXBF = 2, +}; + +enum wmi_tpc_config_event_flag { + WMI_TPC_CONFIG_EVENT_FLAG_TABLE_CDD = 0x1, + WMI_TPC_CONFIG_EVENT_FLAG_TABLE_STBC = 0x2, + WMI_TPC_CONFIG_EVENT_FLAG_TABLE_TXBF = 0x4, +}; + +struct wmi_pdev_tpc_config_event { + __le32 reg_domain; + __le32 chan_freq; + __le32 phy_mode; + __le32 twice_antenna_reduction; + __le32 twice_max_rd_power; + a_sle32 twice_antenna_gain; + __le32 power_limit; + __le32 rate_max; + __le32 num_tx_chain; + __le32 ctl; + __le32 flags; + s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN]; + s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; + s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; + s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; + u8 rates_array[WMI_TPC_RATE_MAX]; +} __packed; + +/* Transmit power scale factor. */ +enum wmi_tp_scale { + WMI_TP_SCALE_MAX = 0, /* no scaling (default) */ + WMI_TP_SCALE_50 = 1, /* 50% of max (-3 dBm) */ + WMI_TP_SCALE_25 = 2, /* 25% of max (-6 dBm) */ + WMI_TP_SCALE_12 = 3, /* 12% of max (-9 dBm) */ + WMI_TP_SCALE_MIN = 4, /* min, but still on */ + WMI_TP_SCALE_SIZE = 5, /* max num of enum */ +}; + +struct wmi_pdev_tpc_final_table_event { + __le32 reg_domain; + __le32 chan_freq; + __le32 phy_mode; + __le32 twice_antenna_reduction; + __le32 twice_max_rd_power; + a_sle32 twice_antenna_gain; + __le32 power_limit; + __le32 rate_max; + __le32 num_tx_chain; + __le32 ctl; + __le32 flags; + s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN]; + s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; + s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; + s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; + u8 rates_array[WMI_TPC_FINAL_RATE_MAX]; + u8 ctl_power_table[WMI_TPC_BEAMFORMING][WMI_TPC_TX_N_CHAIN] + [WMI_TPC_TX_N_CHAIN]; +} __packed; + +struct wmi_pdev_get_tpc_table_cmd { + __le32 param; +} __packed; + +enum wmi_tpc_pream_2ghz { + WMI_TPC_PREAM_2GHZ_CCK = 0, + WMI_TPC_PREAM_2GHZ_OFDM, + WMI_TPC_PREAM_2GHZ_HT20, + WMI_TPC_PREAM_2GHZ_HT40, + WMI_TPC_PREAM_2GHZ_VHT20, + WMI_TPC_PREAM_2GHZ_VHT40, + WMI_TPC_PREAM_2GHZ_VHT80, +}; + +enum wmi_tpc_pream_5ghz { + WMI_TPC_PREAM_5GHZ_OFDM = 1, + WMI_TPC_PREAM_5GHZ_HT20, + WMI_TPC_PREAM_5GHZ_HT40, + WMI_TPC_PREAM_5GHZ_VHT20, + WMI_TPC_PREAM_5GHZ_VHT40, + WMI_TPC_PREAM_5GHZ_VHT80, + WMI_TPC_PREAM_5GHZ_HTCUP, +}; + +#define WMI_PEER_PS_STATE_DISABLED 2 + +struct wmi_peer_sta_ps_state_chg_event { + struct wmi_mac_addr peer_macaddr; + __le32 peer_ps_state; +} __packed; + +struct wmi_pdev_chanlist_update_event { + /* number of channels */ + __le32 num_chan; + /* array of channels */ + struct wmi_channel channel_list[1]; +} __packed; + +#define WMI_MAX_DEBUG_MESG (sizeof(u32) * 32) + +struct wmi_debug_mesg_event { + /* message buffer, NULL terminated */ + char bufp[WMI_MAX_DEBUG_MESG]; +} __packed; + +enum { + /* P2P device */ + VDEV_SUBTYPE_P2PDEV = 0, + /* P2P client */ + VDEV_SUBTYPE_P2PCLI, + /* P2P GO */ + VDEV_SUBTYPE_P2PGO, + /* BT3.0 HS */ + VDEV_SUBTYPE_BT, +}; + +struct wmi_pdev_set_channel_cmd { + /* idnore power , only use flags , mode and freq */ + struct wmi_channel chan; +} __packed; + +struct wmi_pdev_pktlog_enable_cmd { + __le32 ev_bitmap; +} __packed; + +/* Customize the DSCP (bit) to TID (0-7) mapping for QOS */ +#define WMI_DSCP_MAP_MAX (64) +struct wmi_pdev_set_dscp_tid_map_cmd { + /* map indicating DSCP to TID conversion */ + __le32 dscp_to_tid_map[WMI_DSCP_MAP_MAX]; +} __packed; + +enum mcast_bcast_rate_id { + WMI_SET_MCAST_RATE, + WMI_SET_BCAST_RATE +}; + +struct mcast_bcast_rate { + enum mcast_bcast_rate_id rate_id; + __le32 rate; +} __packed; + +struct wmi_wmm_params { + __le32 cwmin; + __le32 cwmax; + __le32 aifs; + __le32 txop; + __le32 acm; + __le32 no_ack; +} __packed; + +struct wmi_pdev_set_wmm_params { + struct wmi_wmm_params ac_be; + struct wmi_wmm_params ac_bk; + struct wmi_wmm_params ac_vi; + struct wmi_wmm_params ac_vo; +} __packed; + +struct wmi_wmm_params_arg { + u32 cwmin; + u32 cwmax; + u32 aifs; + u32 txop; + u32 acm; + u32 no_ack; +}; + +struct wmi_wmm_params_all_arg { + struct wmi_wmm_params_arg ac_be; + struct wmi_wmm_params_arg ac_bk; + struct wmi_wmm_params_arg ac_vi; + struct wmi_wmm_params_arg ac_vo; +}; + +struct wmi_pdev_stats_tx { + /* Num HTT cookies queued to dispatch list */ + __le32 comp_queued; + + /* Num HTT cookies dispatched */ + __le32 comp_delivered; + + /* Num MSDU queued to WAL */ + __le32 msdu_enqued; + + /* Num MPDU queue to WAL */ + __le32 mpdu_enqued; + + /* Num MSDUs dropped by WMM limit */ + __le32 wmm_drop; + + /* Num Local frames queued */ + __le32 local_enqued; + + /* Num Local frames done */ + __le32 local_freed; + + /* Num queued to HW */ + __le32 hw_queued; + + /* Num PPDU reaped from HW */ + __le32 hw_reaped; + + /* Num underruns */ + __le32 underrun; + + /* Num PPDUs cleaned up in TX abort */ + __le32 tx_abort; + + /* Num MPDUs requed by SW */ + __le32 mpdus_requed; + + /* excessive retries */ + __le32 tx_ko; + + /* data hw rate code */ + __le32 data_rc; + + /* Scheduler self triggers */ + __le32 self_triggers; + + /* frames dropped due to excessive sw retries */ + __le32 sw_retry_failure; + + /* illegal rate phy errors */ + __le32 illgl_rate_phy_err; + + /* wal pdev continuous xretry */ + __le32 pdev_cont_xretry; + + /* wal pdev continous xretry */ + __le32 pdev_tx_timeout; + + /* wal pdev resets */ + __le32 pdev_resets; + + /* frames dropped due to non-availability of stateless TIDs */ + __le32 stateless_tid_alloc_failure; + + __le32 phy_underrun; + + /* MPDU is more than txop limit */ + __le32 txop_ovf; +} __packed; + +struct wmi_10_4_pdev_stats_tx { + /* Num HTT cookies queued to dispatch list */ + __le32 comp_queued; + + /* Num HTT cookies dispatched */ + __le32 comp_delivered; + + /* Num MSDU queued to WAL */ + __le32 msdu_enqued; + + /* Num MPDU queue to WAL */ + __le32 mpdu_enqued; + + /* Num MSDUs dropped by WMM limit */ + __le32 wmm_drop; + + /* Num Local frames queued */ + __le32 local_enqued; + + /* Num Local frames done */ + __le32 local_freed; + + /* Num queued to HW */ + __le32 hw_queued; + + /* Num PPDU reaped from HW */ + __le32 hw_reaped; + + /* Num underruns */ + __le32 underrun; + + /* HW Paused. */ + __le32 hw_paused; + + /* Num PPDUs cleaned up in TX abort */ + __le32 tx_abort; + + /* Num MPDUs requed by SW */ + __le32 mpdus_requed; + + /* excessive retries */ + __le32 tx_ko; + + /* data hw rate code */ + __le32 data_rc; + + /* Scheduler self triggers */ + __le32 self_triggers; + + /* frames dropped due to excessive sw retries */ + __le32 sw_retry_failure; + + /* illegal rate phy errors */ + __le32 illgl_rate_phy_err; + + /* wal pdev continuous xretry */ + __le32 pdev_cont_xretry; + + /* wal pdev tx timeouts */ + __le32 pdev_tx_timeout; + + /* wal pdev resets */ + __le32 pdev_resets; + + /* frames dropped due to non-availability of stateless TIDs */ + __le32 stateless_tid_alloc_failure; + + __le32 phy_underrun; + + /* MPDU is more than txop limit */ + __le32 txop_ovf; + + /* Number of Sequences posted */ + __le32 seq_posted; + + /* Number of Sequences failed queueing */ + __le32 seq_failed_queueing; + + /* Number of Sequences completed */ + __le32 seq_completed; + + /* Number of Sequences restarted */ + __le32 seq_restarted; + + /* Number of MU Sequences posted */ + __le32 mu_seq_posted; + + /* Num MPDUs flushed by SW, HWPAUSED,SW TXABORT(Reset,channel change) */ + __le32 mpdus_sw_flush; + + /* Num MPDUs filtered by HW, all filter condition (TTL expired) */ + __le32 mpdus_hw_filter; + + /* Num MPDUs truncated by PDG + * (TXOP, TBTT, PPDU_duration based on rate, dyn_bw) + */ + __le32 mpdus_truncated; + + /* Num MPDUs that was tried but didn't receive ACK or BA */ + __le32 mpdus_ack_failed; + + /* Num MPDUs that was dropped due to expiry. */ + __le32 mpdus_expired; +} __packed; + +struct wmi_pdev_stats_rx { + /* Cnts any change in ring routing mid-ppdu */ + __le32 mid_ppdu_route_change; + + /* Total number of statuses processed */ + __le32 status_rcvd; + + /* Extra frags on rings 0-3 */ + __le32 r0_frags; + __le32 r1_frags; + __le32 r2_frags; + __le32 r3_frags; + + /* MSDUs / MPDUs delivered to HTT */ + __le32 htt_msdus; + __le32 htt_mpdus; + + /* MSDUs / MPDUs delivered to local stack */ + __le32 loc_msdus; + __le32 loc_mpdus; + + /* AMSDUs that have more MSDUs than the status ring size */ + __le32 oversize_amsdu; + + /* Number of PHY errors */ + __le32 phy_errs; + + /* Number of PHY errors drops */ + __le32 phy_err_drop; + + /* Number of mpdu errors - FCS, MIC, ENC etc. */ + __le32 mpdu_errs; +} __packed; + +struct wmi_pdev_stats_peer { + /* REMOVE THIS ONCE REAL PEER STAT COUNTERS ARE ADDED */ + __le32 dummy; +} __packed; + +enum wmi_stats_id { + WMI_STAT_PEER = BIT(0), + WMI_STAT_AP = BIT(1), + WMI_STAT_PDEV = BIT(2), + WMI_STAT_VDEV = BIT(3), + WMI_STAT_BCNFLT = BIT(4), + WMI_STAT_VDEV_RATE = BIT(5), +}; + +enum wmi_10_4_stats_id { + WMI_10_4_STAT_PEER = BIT(0), + WMI_10_4_STAT_AP = BIT(1), + WMI_10_4_STAT_INST = BIT(2), + WMI_10_4_STAT_PEER_EXTD = BIT(3), + WMI_10_4_STAT_VDEV_EXTD = BIT(4), +}; + +enum wmi_tlv_stats_id { + WMI_TLV_STAT_PEER = BIT(0), + WMI_TLV_STAT_AP = BIT(1), + WMI_TLV_STAT_PDEV = BIT(2), + WMI_TLV_STAT_VDEV = BIT(3), + WMI_TLV_STAT_PEER_EXTD = BIT(10), +}; + +struct wlan_inst_rssi_args { + __le16 cfg_retry_count; + __le16 retry_count; +}; + +struct wmi_request_stats_cmd { + __le32 stats_id; + + __le32 vdev_id; + + /* peer MAC address */ + struct wmi_mac_addr peer_macaddr; + + /* Instantaneous RSSI arguments */ + struct wlan_inst_rssi_args inst_rssi_args; +} __packed; + +enum wmi_peer_stats_info_request_type { + /* request stats of one specified peer */ + WMI_REQUEST_ONE_PEER_STATS_INFO = 0x01, + /* request stats of all peers belong to specified VDEV */ + WMI_REQUEST_VDEV_ALL_PEER_STATS_INFO = 0x02, +}; + +/* Suspend option */ +enum { + /* suspend */ + WMI_PDEV_SUSPEND, + + /* suspend and disable all interrupts */ + WMI_PDEV_SUSPEND_AND_DISABLE_INTR, +}; + +struct wmi_pdev_suspend_cmd { + /* suspend option sent to target */ + __le32 suspend_opt; +} __packed; + +struct wmi_stats_event { + __le32 stats_id; /* WMI_STAT_ */ + /* + * number of pdev stats event structures + * (wmi_pdev_stats) 0 or 1 + */ + __le32 num_pdev_stats; + /* + * number of vdev stats event structures + * (wmi_vdev_stats) 0 or max vdevs + */ + __le32 num_vdev_stats; + /* + * number of peer stats event structures + * (wmi_peer_stats) 0 or max peers + */ + __le32 num_peer_stats; + __le32 num_bcnflt_stats; + /* + * followed by + * num_pdev_stats * size of(struct wmi_pdev_stats) + * num_vdev_stats * size of(struct wmi_vdev_stats) + * num_peer_stats * size of(struct wmi_peer_stats) + * + * By having a zero sized array, the pointer to data area + * becomes available without increasing the struct size + */ + u8 data[]; +} __packed; + +struct wmi_10_2_stats_event { + __le32 stats_id; /* %WMI_REQUEST_ */ + __le32 num_pdev_stats; + __le32 num_pdev_ext_stats; + __le32 num_vdev_stats; + __le32 num_peer_stats; + __le32 num_bcnflt_stats; + u8 data[]; +} __packed; + +/* + * PDEV statistics + * TODO: add all PDEV stats here + */ +struct wmi_pdev_stats_base { + __le32 chan_nf; + __le32 tx_frame_count; /* Cycles spent transmitting frames */ + __le32 rx_frame_count; /* Cycles spent receiving frames */ + __le32 rx_clear_count; /* Total channel busy time, evidently */ + __le32 cycle_count; /* Total on-channel time */ + __le32 phy_err_count; + __le32 chan_tx_pwr; +} __packed; + +struct wmi_pdev_stats { + struct wmi_pdev_stats_base base; + struct wmi_pdev_stats_tx tx; + struct wmi_pdev_stats_rx rx; + struct wmi_pdev_stats_peer peer; +} __packed; + +struct wmi_pdev_stats_extra { + __le32 ack_rx_bad; + __le32 rts_bad; + __le32 rts_good; + __le32 fcs_bad; + __le32 no_beacons; + __le32 mib_int_count; +} __packed; + +struct wmi_10x_pdev_stats { + struct wmi_pdev_stats_base base; + struct wmi_pdev_stats_tx tx; + struct wmi_pdev_stats_rx rx; + struct wmi_pdev_stats_peer peer; + struct wmi_pdev_stats_extra extra; +} __packed; + +struct wmi_pdev_stats_mem { + __le32 dram_free; + __le32 iram_free; +} __packed; + +struct wmi_10_2_pdev_stats { + struct wmi_pdev_stats_base base; + struct wmi_pdev_stats_tx tx; + __le32 mc_drop; + struct wmi_pdev_stats_rx rx; + __le32 pdev_rx_timeout; + struct wmi_pdev_stats_mem mem; + struct wmi_pdev_stats_peer peer; + struct wmi_pdev_stats_extra extra; +} __packed; + +struct wmi_10_4_pdev_stats { + struct wmi_pdev_stats_base base; + struct wmi_10_4_pdev_stats_tx tx; + struct wmi_pdev_stats_rx rx; + __le32 rx_ovfl_errs; + struct wmi_pdev_stats_mem mem; + __le32 sram_free_size; + struct wmi_pdev_stats_extra extra; +} __packed; + +/* + * VDEV statistics + */ + +#define WMI_VDEV_STATS_FTM_COUNT_VALID BIT(31) +#define WMI_VDEV_STATS_FTM_COUNT_LSB 0 +#define WMI_VDEV_STATS_FTM_COUNT_MASK 0x7fffffff + +struct wmi_vdev_stats { + __le32 vdev_id; +} __packed; + +struct wmi_vdev_stats_extd { + __le32 vdev_id; + __le32 ppdu_aggr_cnt; + __le32 ppdu_noack; + __le32 mpdu_queued; + __le32 ppdu_nonaggr_cnt; + __le32 mpdu_sw_requeued; + __le32 mpdu_suc_retry; + __le32 mpdu_suc_multitry; + __le32 mpdu_fail_retry; + __le32 tx_ftm_suc; + __le32 tx_ftm_suc_retry; + __le32 tx_ftm_fail; + __le32 rx_ftmr_cnt; + __le32 rx_ftmr_dup_cnt; + __le32 rx_iftmr_cnt; + __le32 rx_iftmr_dup_cnt; + __le32 reserved[6]; +} __packed; + +/* + * peer statistics. + * TODO: add more stats + */ +struct wmi_peer_stats { + struct wmi_mac_addr peer_macaddr; + __le32 peer_rssi; + __le32 peer_tx_rate; +} __packed; + +struct wmi_10x_peer_stats { + struct wmi_peer_stats old; + __le32 peer_rx_rate; +} __packed; + +struct wmi_10_2_peer_stats { + struct wmi_peer_stats old; + __le32 peer_rx_rate; + __le32 current_per; + __le32 retries; + __le32 tx_rate_count; + __le32 max_4ms_frame_len; + __le32 total_sub_frames; + __le32 tx_bytes; + __le32 num_pkt_loss_overflow[4]; + __le32 num_pkt_loss_excess_retry[4]; +} __packed; + +struct wmi_10_2_4_peer_stats { + struct wmi_10_2_peer_stats common; + __le32 peer_rssi_changed; +} __packed; + +struct wmi_10_2_4_ext_peer_stats { + struct wmi_10_2_peer_stats common; + __le32 peer_rssi_changed; + __le32 rx_duration; +} __packed; + +struct wmi_10_4_peer_stats { + struct wmi_mac_addr peer_macaddr; + __le32 peer_rssi; + __le32 peer_rssi_seq_num; + __le32 peer_tx_rate; + __le32 peer_rx_rate; + __le32 current_per; + __le32 retries; + __le32 tx_rate_count; + __le32 max_4ms_frame_len; + __le32 total_sub_frames; + __le32 tx_bytes; + __le32 num_pkt_loss_overflow[4]; + __le32 num_pkt_loss_excess_retry[4]; + __le32 peer_rssi_changed; +} __packed; + +struct wmi_10_4_peer_extd_stats { + struct wmi_mac_addr peer_macaddr; + __le32 inactive_time; + __le32 peer_chain_rssi; + __le32 rx_duration; + __le32 reserved[10]; +} __packed; + +struct wmi_10_4_bss_bcn_stats { + __le32 vdev_id; + __le32 bss_bcns_dropped; + __le32 bss_bcn_delivered; +} __packed; + +struct wmi_10_4_bss_bcn_filter_stats { + __le32 bcns_dropped; + __le32 bcns_delivered; + __le32 active_filters; + struct wmi_10_4_bss_bcn_stats bss_stats; +} __packed; + +struct wmi_10_2_pdev_ext_stats { + __le32 rx_rssi_comb; + __le32 rx_rssi[4]; + __le32 rx_mcs[10]; + __le32 tx_mcs[10]; + __le32 ack_rssi; +} __packed; + +struct wmi_vdev_create_cmd { + __le32 vdev_id; + __le32 vdev_type; + __le32 vdev_subtype; + struct wmi_mac_addr vdev_macaddr; +} __packed; + +enum wmi_vdev_type { + WMI_VDEV_TYPE_AP = 1, + WMI_VDEV_TYPE_STA = 2, + WMI_VDEV_TYPE_IBSS = 3, + WMI_VDEV_TYPE_MONITOR = 4, +}; + +enum wmi_vdev_subtype { + WMI_VDEV_SUBTYPE_NONE, + WMI_VDEV_SUBTYPE_P2P_DEVICE, + WMI_VDEV_SUBTYPE_P2P_CLIENT, + WMI_VDEV_SUBTYPE_P2P_GO, + WMI_VDEV_SUBTYPE_PROXY_STA, + WMI_VDEV_SUBTYPE_MESH_11S, + WMI_VDEV_SUBTYPE_MESH_NON_11S, +}; + +enum wmi_vdev_subtype_legacy { + WMI_VDEV_SUBTYPE_LEGACY_NONE = 0, + WMI_VDEV_SUBTYPE_LEGACY_P2P_DEV = 1, + WMI_VDEV_SUBTYPE_LEGACY_P2P_CLI = 2, + WMI_VDEV_SUBTYPE_LEGACY_P2P_GO = 3, + WMI_VDEV_SUBTYPE_LEGACY_PROXY_STA = 4, +}; + +enum wmi_vdev_subtype_10_2_4 { + WMI_VDEV_SUBTYPE_10_2_4_NONE = 0, + WMI_VDEV_SUBTYPE_10_2_4_P2P_DEV = 1, + WMI_VDEV_SUBTYPE_10_2_4_P2P_CLI = 2, + WMI_VDEV_SUBTYPE_10_2_4_P2P_GO = 3, + WMI_VDEV_SUBTYPE_10_2_4_PROXY_STA = 4, + WMI_VDEV_SUBTYPE_10_2_4_MESH_11S = 5, +}; + +enum wmi_vdev_subtype_10_4 { + WMI_VDEV_SUBTYPE_10_4_NONE = 0, + WMI_VDEV_SUBTYPE_10_4_P2P_DEV = 1, + WMI_VDEV_SUBTYPE_10_4_P2P_CLI = 2, + WMI_VDEV_SUBTYPE_10_4_P2P_GO = 3, + WMI_VDEV_SUBTYPE_10_4_PROXY_STA = 4, + WMI_VDEV_SUBTYPE_10_4_MESH_NON_11S = 5, + WMI_VDEV_SUBTYPE_10_4_MESH_11S = 6, +}; + +/* values for vdev_subtype */ + +/* values for vdev_start_request flags */ +/* + * Indicates that AP VDEV uses hidden ssid. only valid for + * AP/GO + */ +#define WMI_VDEV_START_HIDDEN_SSID (1 << 0) +/* + * Indicates if robust management frame/management frame + * protection is enabled. For GO/AP vdevs, it indicates that + * it may support station/client associations with RMF enabled. + * For STA/client vdevs, it indicates that sta will + * associate with AP with RMF enabled. + */ +#define WMI_VDEV_START_PMF_ENABLED (1 << 1) + +struct wmi_p2p_noa_descriptor { + __le32 type_count; /* 255: continuous schedule, 0: reserved */ + __le32 duration; /* Absent period duration in micro seconds */ + __le32 interval; /* Absent period interval in micro seconds */ + __le32 start_time; /* 32 bit tsf time when in starts */ +} __packed; + +struct wmi_vdev_start_request_cmd { + /* WMI channel */ + struct wmi_channel chan; + /* unique id identifying the VDEV, generated by the caller */ + __le32 vdev_id; + /* requestor id identifying the caller module */ + __le32 requestor_id; + /* beacon interval from received beacon */ + __le32 beacon_interval; + /* DTIM Period from the received beacon */ + __le32 dtim_period; + /* Flags */ + __le32 flags; + /* ssid field. Only valid for AP/GO/IBSS/BTAmp VDEV type. */ + struct wmi_ssid ssid; + /* beacon/probe response xmit rate. Applicable for SoftAP. */ + __le32 bcn_tx_rate; + /* beacon/probe response xmit power. Applicable for SoftAP. */ + __le32 bcn_tx_power; + /* number of p2p NOA descriptor(s) from scan entry */ + __le32 num_noa_descriptors; + /* + * Disable H/W ack. This used by WMI_VDEV_RESTART_REQUEST_CMDID. + * During CAC, Our HW shouldn't ack ditected frames + */ + __le32 disable_hw_ack; + /* actual p2p NOA descriptor from scan entry */ + struct wmi_p2p_noa_descriptor noa_descriptors[2]; +} __packed; + +struct wmi_vdev_restart_request_cmd { + struct wmi_vdev_start_request_cmd vdev_start_request_cmd; +} __packed; + +struct wmi_vdev_start_request_arg { + u32 vdev_id; + struct wmi_channel_arg channel; + u32 bcn_intval; + u32 dtim_period; + u8 *ssid; + u32 ssid_len; + u32 bcn_tx_rate; + u32 bcn_tx_power; + bool disable_hw_ack; + bool hidden_ssid; + bool pmf_enabled; +}; + +struct wmi_vdev_delete_cmd { + /* unique id identifying the VDEV, generated by the caller */ + __le32 vdev_id; +} __packed; + +struct wmi_vdev_up_cmd { + __le32 vdev_id; + __le32 vdev_assoc_id; + struct wmi_mac_addr vdev_bssid; +} __packed; + +struct wmi_vdev_stop_cmd { + __le32 vdev_id; +} __packed; + +struct wmi_vdev_down_cmd { + __le32 vdev_id; +} __packed; + +struct wmi_vdev_standby_response_cmd { + /* unique id identifying the VDEV, generated by the caller */ + __le32 vdev_id; +} __packed; + +struct wmi_vdev_resume_response_cmd { + /* unique id identifying the VDEV, generated by the caller */ + __le32 vdev_id; +} __packed; + +struct wmi_vdev_set_param_cmd { + __le32 vdev_id; + __le32 param_id; + __le32 param_value; +} __packed; + +#define WMI_MAX_KEY_INDEX 3 +#define WMI_MAX_KEY_LEN 32 + +#define WMI_KEY_PAIRWISE 0x00 +#define WMI_KEY_GROUP 0x01 +#define WMI_KEY_TX_USAGE 0x02 /* default tx key - static wep */ + +struct wmi_key_seq_counter { + __le32 key_seq_counter_l; + __le32 key_seq_counter_h; +} __packed; + +enum wmi_cipher_suites { + WMI_CIPHER_NONE, + WMI_CIPHER_WEP, + WMI_CIPHER_TKIP, + WMI_CIPHER_AES_OCB, + WMI_CIPHER_AES_CCM, + WMI_CIPHER_WAPI, + WMI_CIPHER_CKIP, + WMI_CIPHER_AES_CMAC, + WMI_CIPHER_AES_GCM, +}; + +enum wmi_tlv_cipher_suites { + WMI_TLV_CIPHER_NONE, + WMI_TLV_CIPHER_WEP, + WMI_TLV_CIPHER_TKIP, + WMI_TLV_CIPHER_AES_OCB, + WMI_TLV_CIPHER_AES_CCM, + WMI_TLV_CIPHER_WAPI, + WMI_TLV_CIPHER_CKIP, + WMI_TLV_CIPHER_AES_CMAC, + WMI_TLV_CIPHER_ANY, + WMI_TLV_CIPHER_AES_GCM, +}; + +struct wmi_vdev_install_key_cmd { + __le32 vdev_id; + struct wmi_mac_addr peer_macaddr; + __le32 key_idx; + __le32 key_flags; + __le32 key_cipher; /* %WMI_CIPHER_ */ + struct wmi_key_seq_counter key_rsc_counter; + struct wmi_key_seq_counter key_global_rsc_counter; + struct wmi_key_seq_counter key_tsc_counter; + u8 wpi_key_rsc_counter[16]; + u8 wpi_key_tsc_counter[16]; + __le32 key_len; + __le32 key_txmic_len; + __le32 key_rxmic_len; + + /* contains key followed by tx mic followed by rx mic */ + u8 key_data[]; +} __packed; + +struct wmi_vdev_install_key_arg { + u32 vdev_id; + const u8 *macaddr; + u32 key_idx; + u32 key_flags; + u32 key_cipher; + u32 key_len; + u32 key_txmic_len; + u32 key_rxmic_len; + const void *key_data; +}; + +/* + * vdev fixed rate format: + * - preamble - b7:b6 - see WMI_RATE_PREMABLE_ + * - nss - b5:b4 - ss number (0 mean 1ss) + * - rate_mcs - b3:b0 - as below + * CCK: 0 - 11Mbps, 1 - 5,5Mbps, 2 - 2Mbps, 3 - 1Mbps, + * 4 - 11Mbps (s), 5 - 5,5Mbps (s), 6 - 2Mbps (s) + * OFDM: 0 - 48Mbps, 1 - 24Mbps, 2 - 12Mbps, 3 - 6Mbps, + * 4 - 54Mbps, 5 - 36Mbps, 6 - 18Mbps, 7 - 9Mbps + * HT/VHT: MCS index + */ + +/* Preamble types to be used with VDEV fixed rate configuration */ +enum wmi_rate_preamble { + WMI_RATE_PREAMBLE_OFDM, + WMI_RATE_PREAMBLE_CCK, + WMI_RATE_PREAMBLE_HT, + WMI_RATE_PREAMBLE_VHT, +}; + +#define ATH10K_HW_NSS(rate) (1 + (((rate) >> 4) & 0x3)) +#define ATH10K_HW_PREAMBLE(rate) (((rate) >> 6) & 0x3) +#define ATH10K_HW_MCS_RATE(rate) ((rate) & 0xf) +#define ATH10K_HW_LEGACY_RATE(rate) ((rate) & 0x3f) +#define ATH10K_HW_BW(flags) (((flags) >> 3) & 0x3) +#define ATH10K_HW_GI(flags) (((flags) >> 5) & 0x1) +#define ATH10K_HW_RATECODE(rate, nss, preamble) \ + (((preamble) << 6) | ((nss) << 4) | (rate)) +#define ATH10K_HW_AMPDU(flags) ((flags) & 0x1) +#define ATH10K_HW_BA_FAIL(flags) (((flags) >> 1) & 0x3) +#define ATH10K_FW_SKIPPED_RATE_CTRL(flags) (((flags) >> 6) & 0x1) + +#define ATH10K_VHT_MCS_NUM 10 +#define ATH10K_BW_NUM 6 +#define ATH10K_NSS_NUM 4 +#define ATH10K_LEGACY_NUM 12 +#define ATH10K_GI_NUM 2 +#define ATH10K_HT_MCS_NUM 32 +#define ATH10K_RATE_TABLE_NUM 320 +#define ATH10K_RATE_INFO_FLAGS_SGI_BIT 2 + +/* Value to disable fixed rate setting */ +#define WMI_FIXED_RATE_NONE (0xff) + +struct wmi_peer_param_map { + u32 smps_state; + u32 ampdu; + u32 authorize; + u32 chan_width; + u32 nss; + u32 use_4addr; + u32 membership; + u32 use_fixed_power; + u32 user_pos; + u32 crit_proto_hint_enabled; + u32 tx_fail_cnt_thr; + u32 set_hw_retry_cts2s; + u32 ibss_atim_win_len; + u32 debug; + u32 phymode; + u32 dummy_var; +}; + +struct wmi_vdev_param_map { + u32 rts_threshold; + u32 fragmentation_threshold; + u32 beacon_interval; + u32 listen_interval; + u32 multicast_rate; + u32 mgmt_tx_rate; + u32 slot_time; + u32 preamble; + u32 swba_time; + u32 wmi_vdev_stats_update_period; + u32 wmi_vdev_pwrsave_ageout_time; + u32 wmi_vdev_host_swba_interval; + u32 dtim_period; + u32 wmi_vdev_oc_scheduler_air_time_limit; + u32 wds; + u32 atim_window; + u32 bmiss_count_max; + u32 bmiss_first_bcnt; + u32 bmiss_final_bcnt; + u32 feature_wmm; + u32 chwidth; + u32 chextoffset; + u32 disable_htprotection; + u32 sta_quickkickout; + u32 mgmt_rate; + u32 protection_mode; + u32 fixed_rate; + u32 sgi; + u32 ldpc; + u32 tx_stbc; + u32 rx_stbc; + u32 intra_bss_fwd; + u32 def_keyid; + u32 nss; + u32 bcast_data_rate; + u32 mcast_data_rate; + u32 mcast_indicate; + u32 dhcp_indicate; + u32 unknown_dest_indicate; + u32 ap_keepalive_min_idle_inactive_time_secs; + u32 ap_keepalive_max_idle_inactive_time_secs; + u32 ap_keepalive_max_unresponsive_time_secs; + u32 ap_enable_nawds; + u32 mcast2ucast_set; + u32 enable_rtscts; + u32 txbf; + u32 packet_powersave; + u32 drop_unencry; + u32 tx_encap_type; + u32 ap_detect_out_of_sync_sleeping_sta_time_secs; + u32 rc_num_retries; + u32 cabq_maxdur; + u32 mfptest_set; + u32 rts_fixed_rate; + u32 vht_sgimask; + u32 vht80_ratemask; + u32 early_rx_adjust_enable; + u32 early_rx_tgt_bmiss_num; + u32 early_rx_bmiss_sample_cycle; + u32 early_rx_slop_step; + u32 early_rx_init_slop; + u32 early_rx_adjust_pause; + u32 proxy_sta; + u32 meru_vc; + u32 rx_decap_type; + u32 bw_nss_ratemask; + u32 inc_tsf; + u32 dec_tsf; + u32 disable_4addr_src_lrn; + u32 rtt_responder_role; +}; + +#define WMI_VDEV_PARAM_UNSUPPORTED 0 + +/* the definition of different VDEV parameters */ +enum wmi_vdev_param { + /* RTS Threshold */ + WMI_VDEV_PARAM_RTS_THRESHOLD = 0x1, + /* Fragmentation threshold */ + WMI_VDEV_PARAM_FRAGMENTATION_THRESHOLD, + /* beacon interval in TUs */ + WMI_VDEV_PARAM_BEACON_INTERVAL, + /* Listen interval in TUs */ + WMI_VDEV_PARAM_LISTEN_INTERVAL, + /* multicast rate in Mbps */ + WMI_VDEV_PARAM_MULTICAST_RATE, + /* management frame rate in Mbps */ + WMI_VDEV_PARAM_MGMT_TX_RATE, + /* slot time (long vs short) */ + WMI_VDEV_PARAM_SLOT_TIME, + /* preamble (long vs short) */ + WMI_VDEV_PARAM_PREAMBLE, + /* SWBA time (time before tbtt in msec) */ + WMI_VDEV_PARAM_SWBA_TIME, + /* time period for updating VDEV stats */ + WMI_VDEV_STATS_UPDATE_PERIOD, + /* age out time in msec for frames queued for station in power save */ + WMI_VDEV_PWRSAVE_AGEOUT_TIME, + /* + * Host SWBA interval (time in msec before tbtt for SWBA event + * generation). + */ + WMI_VDEV_HOST_SWBA_INTERVAL, + /* DTIM period (specified in units of num beacon intervals) */ + WMI_VDEV_PARAM_DTIM_PERIOD, + /* + * scheduler air time limit for this VDEV. used by off chan + * scheduler. + */ + WMI_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT, + /* enable/dsiable WDS for this VDEV */ + WMI_VDEV_PARAM_WDS, + /* ATIM Window */ + WMI_VDEV_PARAM_ATIM_WINDOW, + /* BMISS max */ + WMI_VDEV_PARAM_BMISS_COUNT_MAX, + /* BMISS first time */ + WMI_VDEV_PARAM_BMISS_FIRST_BCNT, + /* BMISS final time */ + WMI_VDEV_PARAM_BMISS_FINAL_BCNT, + /* WMM enables/disabled */ + WMI_VDEV_PARAM_FEATURE_WMM, + /* Channel width */ + WMI_VDEV_PARAM_CHWIDTH, + /* Channel Offset */ + WMI_VDEV_PARAM_CHEXTOFFSET, + /* Disable HT Protection */ + WMI_VDEV_PARAM_DISABLE_HTPROTECTION, + /* Quick STA Kickout */ + WMI_VDEV_PARAM_STA_QUICKKICKOUT, + /* Rate to be used with Management frames */ + WMI_VDEV_PARAM_MGMT_RATE, + /* Protection Mode */ + WMI_VDEV_PARAM_PROTECTION_MODE, + /* Fixed rate setting */ + WMI_VDEV_PARAM_FIXED_RATE, + /* Short GI Enable/Disable */ + WMI_VDEV_PARAM_SGI, + /* Enable LDPC */ + WMI_VDEV_PARAM_LDPC, + /* Enable Tx STBC */ + WMI_VDEV_PARAM_TX_STBC, + /* Enable Rx STBC */ + WMI_VDEV_PARAM_RX_STBC, + /* Intra BSS forwarding */ + WMI_VDEV_PARAM_INTRA_BSS_FWD, + /* Setting Default xmit key for Vdev */ + WMI_VDEV_PARAM_DEF_KEYID, + /* NSS width */ + WMI_VDEV_PARAM_NSS, + /* Set the custom rate for the broadcast data frames */ + WMI_VDEV_PARAM_BCAST_DATA_RATE, + /* Set the custom rate (rate-code) for multicast data frames */ + WMI_VDEV_PARAM_MCAST_DATA_RATE, + /* Tx multicast packet indicate Enable/Disable */ + WMI_VDEV_PARAM_MCAST_INDICATE, + /* Tx DHCP packet indicate Enable/Disable */ + WMI_VDEV_PARAM_DHCP_INDICATE, + /* Enable host inspection of Tx unicast packet to unknown destination */ + WMI_VDEV_PARAM_UNKNOWN_DEST_INDICATE, + + /* The minimum amount of time AP begins to consider STA inactive */ + WMI_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS, + + /* + * An associated STA is considered inactive when there is no recent + * TX/RX activity and no downlink frames are buffered for it. Once a + * STA exceeds the maximum idle inactive time, the AP will send an + * 802.11 data-null as a keep alive to verify the STA is still + * associated. If the STA does ACK the data-null, or if the data-null + * is buffered and the STA does not retrieve it, the STA will be + * considered unresponsive + * (see WMI_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS). + */ + WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS, + + /* + * An associated STA is considered unresponsive if there is no recent + * TX/RX activity and downlink frames are buffered for it. Once a STA + * exceeds the maximum unresponsive time, the AP will send a + * WMI_STA_KICKOUT event to the host so the STA can be deleted. + */ + WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS, + + /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */ + WMI_VDEV_PARAM_AP_ENABLE_NAWDS, + /* Enable/Disable RTS-CTS */ + WMI_VDEV_PARAM_ENABLE_RTSCTS, + /* Enable TXBFee/er */ + WMI_VDEV_PARAM_TXBF, + + /* Set packet power save */ + WMI_VDEV_PARAM_PACKET_POWERSAVE, + + /* + * Drops un-encrypted packets if eceived in an encrypted connection + * otherwise forwards to host. + */ + WMI_VDEV_PARAM_DROP_UNENCRY, + + /* + * Set the encapsulation type for frames. + */ + WMI_VDEV_PARAM_TX_ENCAP_TYPE, +}; + +/* the definition of different VDEV parameters */ +enum wmi_10x_vdev_param { + /* RTS Threshold */ + WMI_10X_VDEV_PARAM_RTS_THRESHOLD = 0x1, + /* Fragmentation threshold */ + WMI_10X_VDEV_PARAM_FRAGMENTATION_THRESHOLD, + /* beacon interval in TUs */ + WMI_10X_VDEV_PARAM_BEACON_INTERVAL, + /* Listen interval in TUs */ + WMI_10X_VDEV_PARAM_LISTEN_INTERVAL, + /* multicast rate in Mbps */ + WMI_10X_VDEV_PARAM_MULTICAST_RATE, + /* management frame rate in Mbps */ + WMI_10X_VDEV_PARAM_MGMT_TX_RATE, + /* slot time (long vs short) */ + WMI_10X_VDEV_PARAM_SLOT_TIME, + /* preamble (long vs short) */ + WMI_10X_VDEV_PARAM_PREAMBLE, + /* SWBA time (time before tbtt in msec) */ + WMI_10X_VDEV_PARAM_SWBA_TIME, + /* time period for updating VDEV stats */ + WMI_10X_VDEV_STATS_UPDATE_PERIOD, + /* age out time in msec for frames queued for station in power save */ + WMI_10X_VDEV_PWRSAVE_AGEOUT_TIME, + /* + * Host SWBA interval (time in msec before tbtt for SWBA event + * generation). + */ + WMI_10X_VDEV_HOST_SWBA_INTERVAL, + /* DTIM period (specified in units of num beacon intervals) */ + WMI_10X_VDEV_PARAM_DTIM_PERIOD, + /* + * scheduler air time limit for this VDEV. used by off chan + * scheduler. + */ + WMI_10X_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT, + /* enable/dsiable WDS for this VDEV */ + WMI_10X_VDEV_PARAM_WDS, + /* ATIM Window */ + WMI_10X_VDEV_PARAM_ATIM_WINDOW, + /* BMISS max */ + WMI_10X_VDEV_PARAM_BMISS_COUNT_MAX, + /* WMM enables/disabled */ + WMI_10X_VDEV_PARAM_FEATURE_WMM, + /* Channel width */ + WMI_10X_VDEV_PARAM_CHWIDTH, + /* Channel Offset */ + WMI_10X_VDEV_PARAM_CHEXTOFFSET, + /* Disable HT Protection */ + WMI_10X_VDEV_PARAM_DISABLE_HTPROTECTION, + /* Quick STA Kickout */ + WMI_10X_VDEV_PARAM_STA_QUICKKICKOUT, + /* Rate to be used with Management frames */ + WMI_10X_VDEV_PARAM_MGMT_RATE, + /* Protection Mode */ + WMI_10X_VDEV_PARAM_PROTECTION_MODE, + /* Fixed rate setting */ + WMI_10X_VDEV_PARAM_FIXED_RATE, + /* Short GI Enable/Disable */ + WMI_10X_VDEV_PARAM_SGI, + /* Enable LDPC */ + WMI_10X_VDEV_PARAM_LDPC, + /* Enable Tx STBC */ + WMI_10X_VDEV_PARAM_TX_STBC, + /* Enable Rx STBC */ + WMI_10X_VDEV_PARAM_RX_STBC, + /* Intra BSS forwarding */ + WMI_10X_VDEV_PARAM_INTRA_BSS_FWD, + /* Setting Default xmit key for Vdev */ + WMI_10X_VDEV_PARAM_DEF_KEYID, + /* NSS width */ + WMI_10X_VDEV_PARAM_NSS, + /* Set the custom rate for the broadcast data frames */ + WMI_10X_VDEV_PARAM_BCAST_DATA_RATE, + /* Set the custom rate (rate-code) for multicast data frames */ + WMI_10X_VDEV_PARAM_MCAST_DATA_RATE, + /* Tx multicast packet indicate Enable/Disable */ + WMI_10X_VDEV_PARAM_MCAST_INDICATE, + /* Tx DHCP packet indicate Enable/Disable */ + WMI_10X_VDEV_PARAM_DHCP_INDICATE, + /* Enable host inspection of Tx unicast packet to unknown destination */ + WMI_10X_VDEV_PARAM_UNKNOWN_DEST_INDICATE, + + /* The minimum amount of time AP begins to consider STA inactive */ + WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS, + + /* + * An associated STA is considered inactive when there is no recent + * TX/RX activity and no downlink frames are buffered for it. Once a + * STA exceeds the maximum idle inactive time, the AP will send an + * 802.11 data-null as a keep alive to verify the STA is still + * associated. If the STA does ACK the data-null, or if the data-null + * is buffered and the STA does not retrieve it, the STA will be + * considered unresponsive + * (see WMI_10X_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS). + */ + WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS, + + /* + * An associated STA is considered unresponsive if there is no recent + * TX/RX activity and downlink frames are buffered for it. Once a STA + * exceeds the maximum unresponsive time, the AP will send a + * WMI_10X_STA_KICKOUT event to the host so the STA can be deleted. + */ + WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS, + + /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */ + WMI_10X_VDEV_PARAM_AP_ENABLE_NAWDS, + + WMI_10X_VDEV_PARAM_MCAST2UCAST_SET, + /* Enable/Disable RTS-CTS */ + WMI_10X_VDEV_PARAM_ENABLE_RTSCTS, + + WMI_10X_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS, + + /* following are available as of firmware 10.2 */ + WMI_10X_VDEV_PARAM_TX_ENCAP_TYPE, + WMI_10X_VDEV_PARAM_CABQ_MAXDUR, + WMI_10X_VDEV_PARAM_MFPTEST_SET, + WMI_10X_VDEV_PARAM_RTS_FIXED_RATE, + WMI_10X_VDEV_PARAM_VHT_SGIMASK, + WMI_10X_VDEV_PARAM_VHT80_RATEMASK, + WMI_10X_VDEV_PARAM_TSF_INCREMENT, +}; + +enum wmi_10_4_vdev_param { + WMI_10_4_VDEV_PARAM_RTS_THRESHOLD = 0x1, + WMI_10_4_VDEV_PARAM_FRAGMENTATION_THRESHOLD, + WMI_10_4_VDEV_PARAM_BEACON_INTERVAL, + WMI_10_4_VDEV_PARAM_LISTEN_INTERVAL, + WMI_10_4_VDEV_PARAM_MULTICAST_RATE, + WMI_10_4_VDEV_PARAM_MGMT_TX_RATE, + WMI_10_4_VDEV_PARAM_SLOT_TIME, + WMI_10_4_VDEV_PARAM_PREAMBLE, + WMI_10_4_VDEV_PARAM_SWBA_TIME, + WMI_10_4_VDEV_STATS_UPDATE_PERIOD, + WMI_10_4_VDEV_PWRSAVE_AGEOUT_TIME, + WMI_10_4_VDEV_HOST_SWBA_INTERVAL, + WMI_10_4_VDEV_PARAM_DTIM_PERIOD, + WMI_10_4_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT, + WMI_10_4_VDEV_PARAM_WDS, + WMI_10_4_VDEV_PARAM_ATIM_WINDOW, + WMI_10_4_VDEV_PARAM_BMISS_COUNT_MAX, + WMI_10_4_VDEV_PARAM_BMISS_FIRST_BCNT, + WMI_10_4_VDEV_PARAM_BMISS_FINAL_BCNT, + WMI_10_4_VDEV_PARAM_FEATURE_WMM, + WMI_10_4_VDEV_PARAM_CHWIDTH, + WMI_10_4_VDEV_PARAM_CHEXTOFFSET, + WMI_10_4_VDEV_PARAM_DISABLE_HTPROTECTION, + WMI_10_4_VDEV_PARAM_STA_QUICKKICKOUT, + WMI_10_4_VDEV_PARAM_MGMT_RATE, + WMI_10_4_VDEV_PARAM_PROTECTION_MODE, + WMI_10_4_VDEV_PARAM_FIXED_RATE, + WMI_10_4_VDEV_PARAM_SGI, + WMI_10_4_VDEV_PARAM_LDPC, + WMI_10_4_VDEV_PARAM_TX_STBC, + WMI_10_4_VDEV_PARAM_RX_STBC, + WMI_10_4_VDEV_PARAM_INTRA_BSS_FWD, + WMI_10_4_VDEV_PARAM_DEF_KEYID, + WMI_10_4_VDEV_PARAM_NSS, + WMI_10_4_VDEV_PARAM_BCAST_DATA_RATE, + WMI_10_4_VDEV_PARAM_MCAST_DATA_RATE, + WMI_10_4_VDEV_PARAM_MCAST_INDICATE, + WMI_10_4_VDEV_PARAM_DHCP_INDICATE, + WMI_10_4_VDEV_PARAM_UNKNOWN_DEST_INDICATE, + WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS, + WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS, + WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS, + WMI_10_4_VDEV_PARAM_AP_ENABLE_NAWDS, + WMI_10_4_VDEV_PARAM_MCAST2UCAST_SET, + WMI_10_4_VDEV_PARAM_ENABLE_RTSCTS, + WMI_10_4_VDEV_PARAM_RC_NUM_RETRIES, + WMI_10_4_VDEV_PARAM_TXBF, + WMI_10_4_VDEV_PARAM_PACKET_POWERSAVE, + WMI_10_4_VDEV_PARAM_DROP_UNENCRY, + WMI_10_4_VDEV_PARAM_TX_ENCAP_TYPE, + WMI_10_4_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS, + WMI_10_4_VDEV_PARAM_CABQ_MAXDUR, + WMI_10_4_VDEV_PARAM_MFPTEST_SET, + WMI_10_4_VDEV_PARAM_RTS_FIXED_RATE, + WMI_10_4_VDEV_PARAM_VHT_SGIMASK, + WMI_10_4_VDEV_PARAM_VHT80_RATEMASK, + WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_ENABLE, + WMI_10_4_VDEV_PARAM_EARLY_RX_TGT_BMISS_NUM, + WMI_10_4_VDEV_PARAM_EARLY_RX_BMISS_SAMPLE_CYCLE, + WMI_10_4_VDEV_PARAM_EARLY_RX_SLOP_STEP, + WMI_10_4_VDEV_PARAM_EARLY_RX_INIT_SLOP, + WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_PAUSE, + WMI_10_4_VDEV_PARAM_PROXY_STA, + WMI_10_4_VDEV_PARAM_MERU_VC, + WMI_10_4_VDEV_PARAM_RX_DECAP_TYPE, + WMI_10_4_VDEV_PARAM_BW_NSS_RATEMASK, + WMI_10_4_VDEV_PARAM_SENSOR_AP, + WMI_10_4_VDEV_PARAM_BEACON_RATE, + WMI_10_4_VDEV_PARAM_DTIM_ENABLE_CTS, + WMI_10_4_VDEV_PARAM_STA_KICKOUT, + WMI_10_4_VDEV_PARAM_CAPABILITIES, + WMI_10_4_VDEV_PARAM_TSF_INCREMENT, + WMI_10_4_VDEV_PARAM_RX_FILTER, + WMI_10_4_VDEV_PARAM_MGMT_TX_POWER, + WMI_10_4_VDEV_PARAM_ATF_SSID_SCHED_POLICY, + WMI_10_4_VDEV_PARAM_DISABLE_DYN_BW_RTS, + WMI_10_4_VDEV_PARAM_TSF_DECREMENT, + WMI_10_4_VDEV_PARAM_SELFGEN_FIXED_RATE, + WMI_10_4_VDEV_PARAM_AMPDU_SUBFRAME_SIZE_PER_AC, + WMI_10_4_VDEV_PARAM_NSS_VHT160, + WMI_10_4_VDEV_PARAM_NSS_VHT80_80, + WMI_10_4_VDEV_PARAM_AMSDU_SUBFRAME_SIZE_PER_AC, + WMI_10_4_VDEV_PARAM_DISABLE_CABQ, + WMI_10_4_VDEV_PARAM_SIFS_TRIGGER_RATE, + WMI_10_4_VDEV_PARAM_TX_POWER, + WMI_10_4_VDEV_PARAM_ENABLE_DISABLE_RTT_RESPONDER_ROLE, + WMI_10_4_VDEV_PARAM_DISABLE_4_ADDR_SRC_LRN, +}; + +#define WMI_VDEV_DISABLE_4_ADDR_SRC_LRN 1 + +#define WMI_VDEV_PARAM_TXBF_SU_TX_BFEE BIT(0) +#define WMI_VDEV_PARAM_TXBF_MU_TX_BFEE BIT(1) +#define WMI_VDEV_PARAM_TXBF_SU_TX_BFER BIT(2) +#define WMI_VDEV_PARAM_TXBF_MU_TX_BFER BIT(3) + +#define WMI_TXBF_STS_CAP_OFFSET_LSB 4 +#define WMI_TXBF_STS_CAP_OFFSET_MASK 0x70 +#define WMI_TXBF_CONF_IMPLICIT_BF BIT(7) +#define WMI_BF_SOUND_DIM_OFFSET_LSB 8 +#define WMI_BF_SOUND_DIM_OFFSET_MASK 0xf00 + +/* slot time long */ +#define WMI_VDEV_SLOT_TIME_LONG 0x1 +/* slot time short */ +#define WMI_VDEV_SLOT_TIME_SHORT 0x2 +/* preablbe long */ +#define WMI_VDEV_PREAMBLE_LONG 0x1 +/* preablbe short */ +#define WMI_VDEV_PREAMBLE_SHORT 0x2 + +enum wmi_start_event_param { + WMI_VDEV_RESP_START_EVENT = 0, + WMI_VDEV_RESP_RESTART_EVENT, +}; + +struct wmi_vdev_start_response_event { + __le32 vdev_id; + __le32 req_id; + __le32 resp_type; /* %WMI_VDEV_RESP_ */ + __le32 status; +} __packed; + +struct wmi_vdev_standby_req_event { + /* unique id identifying the VDEV, generated by the caller */ + __le32 vdev_id; +} __packed; + +struct wmi_vdev_resume_req_event { + /* unique id identifying the VDEV, generated by the caller */ + __le32 vdev_id; +} __packed; + +struct wmi_vdev_stopped_event { + /* unique id identifying the VDEV, generated by the caller */ + __le32 vdev_id; +} __packed; + +/* + * common structure used for simple events + * (stopped, resume_req, standby response) + */ +struct wmi_vdev_simple_event { + /* unique id identifying the VDEV, generated by the caller */ + __le32 vdev_id; +} __packed; + +/* VDEV start response status codes */ +/* VDEV successfully started */ +#define WMI_INIFIED_VDEV_START_RESPONSE_STATUS_SUCCESS 0x0 + +/* requested VDEV not found */ +#define WMI_INIFIED_VDEV_START_RESPONSE_INVALID_VDEVID 0x1 + +/* unsupported VDEV combination */ +#define WMI_INIFIED_VDEV_START_RESPONSE_NOT_SUPPORTED 0x2 + +/* TODO: please add more comments if you have in-depth information */ +struct wmi_vdev_spectral_conf_cmd { + __le32 vdev_id; + + /* number of fft samples to send (0 for infinite) */ + __le32 scan_count; + __le32 scan_period; + __le32 scan_priority; + + /* number of bins in the FFT: 2^(fft_size - bin_scale) */ + __le32 scan_fft_size; + __le32 scan_gc_ena; + __le32 scan_restart_ena; + __le32 scan_noise_floor_ref; + __le32 scan_init_delay; + __le32 scan_nb_tone_thr; + __le32 scan_str_bin_thr; + __le32 scan_wb_rpt_mode; + __le32 scan_rssi_rpt_mode; + __le32 scan_rssi_thr; + __le32 scan_pwr_format; + + /* rpt_mode: Format of FFT report to software for spectral scan + * triggered FFTs: + * 0: No FFT report (only spectral scan summary report) + * 1: 2-dword summary of metrics for each completed FFT + spectral + * scan summary report + * 2: 2-dword summary of metrics for each completed FFT + + * 1x- oversampled bins(in-band) per FFT + spectral scan summary + * report + * 3: 2-dword summary of metrics for each completed FFT + + * 2x- oversampled bins (all) per FFT + spectral scan summary + */ + __le32 scan_rpt_mode; + __le32 scan_bin_scale; + __le32 scan_dbm_adj; + __le32 scan_chn_mask; +} __packed; + +struct wmi_vdev_spectral_conf_arg { + u32 vdev_id; + u32 scan_count; + u32 scan_period; + u32 scan_priority; + u32 scan_fft_size; + u32 scan_gc_ena; + u32 scan_restart_ena; + u32 scan_noise_floor_ref; + u32 scan_init_delay; + u32 scan_nb_tone_thr; + u32 scan_str_bin_thr; + u32 scan_wb_rpt_mode; + u32 scan_rssi_rpt_mode; + u32 scan_rssi_thr; + u32 scan_pwr_format; + u32 scan_rpt_mode; + u32 scan_bin_scale; + u32 scan_dbm_adj; + u32 scan_chn_mask; +}; + +#define WMI_SPECTRAL_ENABLE_DEFAULT 0 +#define WMI_SPECTRAL_COUNT_DEFAULT 0 +#define WMI_SPECTRAL_PERIOD_DEFAULT 35 +#define WMI_SPECTRAL_PRIORITY_DEFAULT 1 +#define WMI_SPECTRAL_FFT_SIZE_DEFAULT 7 +#define WMI_SPECTRAL_GC_ENA_DEFAULT 1 +#define WMI_SPECTRAL_RESTART_ENA_DEFAULT 0 +#define WMI_SPECTRAL_NOISE_FLOOR_REF_DEFAULT -96 +#define WMI_SPECTRAL_INIT_DELAY_DEFAULT 80 +#define WMI_SPECTRAL_NB_TONE_THR_DEFAULT 12 +#define WMI_SPECTRAL_STR_BIN_THR_DEFAULT 8 +#define WMI_SPECTRAL_WB_RPT_MODE_DEFAULT 0 +#define WMI_SPECTRAL_RSSI_RPT_MODE_DEFAULT 0 +#define WMI_SPECTRAL_RSSI_THR_DEFAULT 0xf0 +#define WMI_SPECTRAL_PWR_FORMAT_DEFAULT 0 +#define WMI_SPECTRAL_RPT_MODE_DEFAULT 2 +#define WMI_SPECTRAL_BIN_SCALE_DEFAULT 1 +#define WMI_SPECTRAL_DBM_ADJ_DEFAULT 1 +#define WMI_SPECTRAL_CHN_MASK_DEFAULT 1 + +struct wmi_vdev_spectral_enable_cmd { + __le32 vdev_id; + __le32 trigger_cmd; + __le32 enable_cmd; +} __packed; + +#define WMI_SPECTRAL_TRIGGER_CMD_TRIGGER 1 +#define WMI_SPECTRAL_TRIGGER_CMD_CLEAR 2 +#define WMI_SPECTRAL_ENABLE_CMD_ENABLE 1 +#define WMI_SPECTRAL_ENABLE_CMD_DISABLE 2 + +/* Beacon processing related command and event structures */ +struct wmi_bcn_tx_hdr { + __le32 vdev_id; + __le32 tx_rate; + __le32 tx_power; + __le32 bcn_len; +} __packed; + +struct wmi_bcn_tx_cmd { + struct wmi_bcn_tx_hdr hdr; + u8 *bcn[]; +} __packed; + +struct wmi_bcn_tx_arg { + u32 vdev_id; + u32 tx_rate; + u32 tx_power; + u32 bcn_len; + const void *bcn; +}; + +enum wmi_bcn_tx_ref_flags { + WMI_BCN_TX_REF_FLAG_DTIM_ZERO = 0x1, + WMI_BCN_TX_REF_FLAG_DELIVER_CAB = 0x2, +}; + +/* TODO: It is unclear why "no antenna" works while any other seemingly valid + * chainmask yields no beacons on the air at all. + */ +#define WMI_BCN_TX_REF_DEF_ANTENNA 0 + +struct wmi_bcn_tx_ref_cmd { + __le32 vdev_id; + __le32 data_len; + /* physical address of the frame - dma pointer */ + __le32 data_ptr; + /* id for host to track */ + __le32 msdu_id; + /* frame ctrl to setup PPDU desc */ + __le32 frame_control; + /* to control CABQ traffic: WMI_BCN_TX_REF_FLAG_ */ + __le32 flags; + /* introduced in 10.2 */ + __le32 antenna_mask; +} __packed; + +/* Beacon filter */ +#define WMI_BCN_FILTER_ALL 0 /* Filter all beacons */ +#define WMI_BCN_FILTER_NONE 1 /* Pass all beacons */ +#define WMI_BCN_FILTER_RSSI 2 /* Pass Beacons RSSI >= RSSI threshold */ +#define WMI_BCN_FILTER_BSSID 3 /* Pass Beacons with matching BSSID */ +#define WMI_BCN_FILTER_SSID 4 /* Pass Beacons with matching SSID */ + +struct wmi_bcn_filter_rx_cmd { + /* Filter ID */ + __le32 bcn_filter_id; + /* Filter type - wmi_bcn_filter */ + __le32 bcn_filter; + /* Buffer len */ + __le32 bcn_filter_len; + /* Filter info (threshold, BSSID, RSSI) */ + u8 *bcn_filter_buf; +} __packed; + +/* Capabilities and IEs to be passed to firmware */ +struct wmi_bcn_prb_info { + /* Capabilities */ + __le32 caps; + /* ERP info */ + __le32 erp; + /* Advanced capabilities */ + /* HT capabilities */ + /* HT Info */ + /* ibss_dfs */ + /* wpa Info */ + /* rsn Info */ + /* rrm info */ + /* ath_ext */ + /* app IE */ +} __packed; + +struct wmi_bcn_tmpl_cmd { + /* unique id identifying the VDEV, generated by the caller */ + __le32 vdev_id; + /* TIM IE offset from the beginning of the template. */ + __le32 tim_ie_offset; + /* beacon probe capabilities and IEs */ + struct wmi_bcn_prb_info bcn_prb_info; + /* beacon buffer length */ + __le32 buf_len; + /* variable length data */ + u8 data[1]; +} __packed; + +struct wmi_prb_tmpl_cmd { + /* unique id identifying the VDEV, generated by the caller */ + __le32 vdev_id; + /* beacon probe capabilities and IEs */ + struct wmi_bcn_prb_info bcn_prb_info; + /* beacon buffer length */ + __le32 buf_len; + /* Variable length data */ + u8 data[1]; +} __packed; + +enum wmi_sta_ps_mode { + /* enable power save for the given STA VDEV */ + WMI_STA_PS_MODE_DISABLED = 0, + /* disable power save for a given STA VDEV */ + WMI_STA_PS_MODE_ENABLED = 1, +}; + +struct wmi_sta_powersave_mode_cmd { + /* unique id identifying the VDEV, generated by the caller */ + __le32 vdev_id; + + /* + * Power save mode + * (see enum wmi_sta_ps_mode) + */ + __le32 sta_ps_mode; +} __packed; + +enum wmi_csa_offload_en { + WMI_CSA_OFFLOAD_DISABLE = 0, + WMI_CSA_OFFLOAD_ENABLE = 1, +}; + +struct wmi_csa_offload_enable_cmd { + __le32 vdev_id; + __le32 csa_offload_enable; +} __packed; + +struct wmi_csa_offload_chanswitch_cmd { + __le32 vdev_id; + struct wmi_channel chan; +} __packed; + +/* + * This parameter controls the policy for retrieving frames from AP while the + * STA is in sleep state. + * + * Only takes affect if the sta_ps_mode is enabled + */ +enum wmi_sta_ps_param_rx_wake_policy { + /* + * Wake up when ever there is an RX activity on the VDEV. In this mode + * the Power save SM(state machine) will come out of sleep by either + * sending null frame (or) a data frame (with PS==0) in response to TIM + * bit set in the received beacon frame from AP. + */ + WMI_STA_PS_RX_WAKE_POLICY_WAKE = 0, + + /* + * Here the power save state machine will not wakeup in response to TIM + * bit, instead it will send a PSPOLL (or) UASPD trigger based on UAPSD + * configuration setup by WMISET_PS_SET_UAPSD WMI command. When all + * access categories are delivery-enabled, the station will send a + * UAPSD trigger frame, otherwise it will send a PS-Poll. + */ + WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD = 1, +}; + +/* + * Number of tx frames/beacon that cause the power save SM to wake up. + * + * Value 1 causes the SM to wake up for every TX. Value 0 has a special + * meaning, It will cause the SM to never wake up. This is useful if you want + * to keep the system to sleep all the time for some kind of test mode . host + * can change this parameter any time. It will affect at the next tx frame. + */ +enum wmi_sta_ps_param_tx_wake_threshold { + WMI_STA_PS_TX_WAKE_THRESHOLD_NEVER = 0, + WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS = 1, + + /* + * Values greater than one indicate that many TX attempts per beacon + * interval before the STA will wake up + */ +}; + +/* + * The maximum number of PS-Poll frames the FW will send in response to + * traffic advertised in TIM before waking up (by sending a null frame with PS + * = 0). Value 0 has a special meaning: there is no maximum count and the FW + * will send as many PS-Poll as are necessary to retrieve buffered BU. This + * parameter is used when the RX wake policy is + * WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD and ignored when the RX wake + * policy is WMI_STA_PS_RX_WAKE_POLICY_WAKE. + */ +enum wmi_sta_ps_param_pspoll_count { + WMI_STA_PS_PSPOLL_COUNT_NO_MAX = 0, + /* + * Values greater than 0 indicate the maximum numer of PS-Poll frames + * FW will send before waking up. + */ + + /* When u-APSD is enabled the firmware will be very reluctant to exit + * STA PS. This could result in very poor Rx performance with STA doing + * PS-Poll for each and every buffered frame. This value is a bit + * arbitrary. + */ + WMI_STA_PS_PSPOLL_COUNT_UAPSD = 3, +}; + +/* + * This will include the delivery and trigger enabled state for every AC. + * This is the negotiated state with AP. The host MLME needs to set this based + * on AP capability and the state Set in the association request by the + * station MLME.Lower 8 bits of the value specify the UAPSD configuration. + */ +#define WMI_UAPSD_AC_TYPE_DELI 0 +#define WMI_UAPSD_AC_TYPE_TRIG 1 + +#define WMI_UAPSD_AC_BIT_MASK(ac, type) \ + (type == WMI_UAPSD_AC_TYPE_DELI ? 1 << (ac << 1) : 1 << ((ac << 1) + 1)) + +enum wmi_sta_ps_param_uapsd { + WMI_STA_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0), + WMI_STA_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1), + WMI_STA_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2), + WMI_STA_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3), + WMI_STA_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4), + WMI_STA_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5), + WMI_STA_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6), + WMI_STA_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7), +}; + +#define WMI_STA_UAPSD_MAX_INTERVAL_MSEC UINT_MAX + +struct wmi_sta_uapsd_auto_trig_param { + __le32 wmm_ac; + __le32 user_priority; + __le32 service_interval; + __le32 suspend_interval; + __le32 delay_interval; +}; + +struct wmi_sta_uapsd_auto_trig_cmd_fixed_param { + __le32 vdev_id; + struct wmi_mac_addr peer_macaddr; + __le32 num_ac; +}; + +struct wmi_sta_uapsd_auto_trig_arg { + u32 wmm_ac; + u32 user_priority; + u32 service_interval; + u32 suspend_interval; + u32 delay_interval; +}; + +enum wmi_sta_powersave_param { + /* + * Controls how frames are retrievd from AP while STA is sleeping + * + * (see enum wmi_sta_ps_param_rx_wake_policy) + */ + WMI_STA_PS_PARAM_RX_WAKE_POLICY = 0, + + /* + * The STA will go active after this many TX + * + * (see enum wmi_sta_ps_param_tx_wake_threshold) + */ + WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD = 1, + + /* + * Number of PS-Poll to send before STA wakes up + * + * (see enum wmi_sta_ps_param_pspoll_count) + * + */ + WMI_STA_PS_PARAM_PSPOLL_COUNT = 2, + + /* + * TX/RX inactivity time in msec before going to sleep. + * + * The power save SM will monitor tx/rx activity on the VDEV, if no + * activity for the specified msec of the parameter the Power save + * SM will go to sleep. + */ + WMI_STA_PS_PARAM_INACTIVITY_TIME = 3, + + /* + * Set uapsd configuration. + * + * (see enum wmi_sta_ps_param_uapsd) + */ + WMI_STA_PS_PARAM_UAPSD = 4, +}; + +struct wmi_sta_powersave_param_cmd { + __le32 vdev_id; + __le32 param_id; /* %WMI_STA_PS_PARAM_ */ + __le32 param_value; +} __packed; + +/* No MIMO power save */ +#define WMI_STA_MIMO_PS_MODE_DISABLE +/* mimo powersave mode static*/ +#define WMI_STA_MIMO_PS_MODE_STATIC +/* mimo powersave mode dynamic */ +#define WMI_STA_MIMO_PS_MODE_DYNAMIC + +struct wmi_sta_mimo_ps_mode_cmd { + /* unique id identifying the VDEV, generated by the caller */ + __le32 vdev_id; + /* mimo powersave mode as defined above */ + __le32 mimo_pwrsave_mode; +} __packed; + +/* U-APSD configuration of peer station from (re)assoc request and TSPECs */ +enum wmi_ap_ps_param_uapsd { + WMI_AP_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0), + WMI_AP_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1), + WMI_AP_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2), + WMI_AP_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3), + WMI_AP_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4), + WMI_AP_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5), + WMI_AP_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6), + WMI_AP_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7), +}; + +/* U-APSD maximum service period of peer station */ +enum wmi_ap_ps_peer_param_max_sp { + WMI_AP_PS_PEER_PARAM_MAX_SP_UNLIMITED = 0, + WMI_AP_PS_PEER_PARAM_MAX_SP_2 = 1, + WMI_AP_PS_PEER_PARAM_MAX_SP_4 = 2, + WMI_AP_PS_PEER_PARAM_MAX_SP_6 = 3, + MAX_WMI_AP_PS_PEER_PARAM_MAX_SP, +}; + +/* + * AP power save parameter + * Set a power save specific parameter for a peer station + */ +enum wmi_ap_ps_peer_param { + /* Set uapsd configuration for a given peer. + * + * Include the delivery and trigger enabled state for every AC. + * The host MLME needs to set this based on AP capability and stations + * request Set in the association request received from the station. + * + * Lower 8 bits of the value specify the UAPSD configuration. + * + * (see enum wmi_ap_ps_param_uapsd) + * The default value is 0. + */ + WMI_AP_PS_PEER_PARAM_UAPSD = 0, + + /* + * Set the service period for a UAPSD capable station + * + * The service period from wme ie in the (re)assoc request frame. + * + * (see enum wmi_ap_ps_peer_param_max_sp) + */ + WMI_AP_PS_PEER_PARAM_MAX_SP = 1, + + /* Time in seconds for aging out buffered frames for STA in PS */ + WMI_AP_PS_PEER_PARAM_AGEOUT_TIME = 2, +}; + +struct wmi_ap_ps_peer_cmd { + /* unique id identifying the VDEV, generated by the caller */ + __le32 vdev_id; + + /* peer MAC address */ + struct wmi_mac_addr peer_macaddr; + + /* AP powersave param (see enum wmi_ap_ps_peer_param) */ + __le32 param_id; + + /* AP powersave param value */ + __le32 param_value; +} __packed; + +/* 128 clients = 4 words */ +#define WMI_TIM_BITMAP_ARRAY_SIZE 4 + +struct wmi_tim_info { + __le32 tim_len; + __le32 tim_mcast; + __le32 tim_bitmap[WMI_TIM_BITMAP_ARRAY_SIZE]; + __le32 tim_changed; + __le32 tim_num_ps_pending; +} __packed; + +struct wmi_tim_info_arg { + __le32 tim_len; + __le32 tim_mcast; + const __le32 *tim_bitmap; + __le32 tim_changed; + __le32 tim_num_ps_pending; +} __packed; + +/* Maximum number of NOA Descriptors supported */ +#define WMI_P2P_MAX_NOA_DESCRIPTORS 4 +#define WMI_P2P_OPPPS_ENABLE_BIT BIT(0) +#define WMI_P2P_OPPPS_CTWINDOW_OFFSET 1 +#define WMI_P2P_NOA_CHANGED_BIT BIT(0) + +struct wmi_p2p_noa_info { + /* Bit 0 - Flag to indicate an update in NOA schedule + * Bits 7-1 - Reserved + */ + u8 changed; + /* NOA index */ + u8 index; + /* Bit 0 - Opp PS state of the AP + * Bits 1-7 - Ctwindow in TUs + */ + u8 ctwindow_oppps; + /* Number of NOA descriptors */ + u8 num_descriptors; + + struct wmi_p2p_noa_descriptor descriptors[WMI_P2P_MAX_NOA_DESCRIPTORS]; +} __packed; + +struct wmi_bcn_info { + struct wmi_tim_info tim_info; + struct wmi_p2p_noa_info p2p_noa_info; +} __packed; + +struct wmi_host_swba_event { + __le32 vdev_map; + struct wmi_bcn_info bcn_info[]; +} __packed; + +struct wmi_10_2_4_bcn_info { + struct wmi_tim_info tim_info; + /* The 10.2.4 FW doesn't have p2p NOA info */ +} __packed; + +struct wmi_10_2_4_host_swba_event { + __le32 vdev_map; + struct wmi_10_2_4_bcn_info bcn_info[]; +} __packed; + +/* 16 words = 512 client + 1 word = for guard */ +#define WMI_10_4_TIM_BITMAP_ARRAY_SIZE 17 + +struct wmi_10_4_tim_info { + __le32 tim_len; + __le32 tim_mcast; + __le32 tim_bitmap[WMI_10_4_TIM_BITMAP_ARRAY_SIZE]; + __le32 tim_changed; + __le32 tim_num_ps_pending; +} __packed; + +#define WMI_10_4_P2P_MAX_NOA_DESCRIPTORS 1 + +struct wmi_10_4_p2p_noa_info { + /* Bit 0 - Flag to indicate an update in NOA schedule + * Bits 7-1 - Reserved + */ + u8 changed; + /* NOA index */ + u8 index; + /* Bit 0 - Opp PS state of the AP + * Bits 1-7 - Ctwindow in TUs + */ + u8 ctwindow_oppps; + /* Number of NOA descriptors */ + u8 num_descriptors; + + struct wmi_p2p_noa_descriptor + noa_descriptors[WMI_10_4_P2P_MAX_NOA_DESCRIPTORS]; +} __packed; + +struct wmi_10_4_bcn_info { + struct wmi_10_4_tim_info tim_info; + struct wmi_10_4_p2p_noa_info p2p_noa_info; +} __packed; + +struct wmi_10_4_host_swba_event { + __le32 vdev_map; + struct wmi_10_4_bcn_info bcn_info[]; +} __packed; + +#define WMI_MAX_AP_VDEV 16 + +struct wmi_tbtt_offset_event { + __le32 vdev_map; + __le32 tbttoffset_list[WMI_MAX_AP_VDEV]; +} __packed; + +struct wmi_peer_create_cmd { + __le32 vdev_id; + struct wmi_mac_addr peer_macaddr; + __le32 peer_type; +} __packed; + +enum wmi_peer_type { + WMI_PEER_TYPE_DEFAULT = 0, + WMI_PEER_TYPE_BSS = 1, + WMI_PEER_TYPE_TDLS = 2, +}; + +struct wmi_peer_delete_cmd { + __le32 vdev_id; + struct wmi_mac_addr peer_macaddr; +} __packed; + +struct wmi_peer_flush_tids_cmd { + __le32 vdev_id; + struct wmi_mac_addr peer_macaddr; + __le32 peer_tid_bitmap; +} __packed; + +struct wmi_fixed_rate { + /* + * rate mode . 0: disable fixed rate (auto rate) + * 1: legacy (non 11n) rate specified as ieee rate 2*Mbps + * 2: ht20 11n rate specified as mcs index + * 3: ht40 11n rate specified as mcs index + */ + __le32 rate_mode; + /* + * 4 rate values for 4 rate series. series 0 is stored in byte 0 (LSB) + * and series 3 is stored at byte 3 (MSB) + */ + __le32 rate_series; + /* + * 4 retry counts for 4 rate series. retry count for rate 0 is stored + * in byte 0 (LSB) and retry count for rate 3 is stored at byte 3 + * (MSB) + */ + __le32 rate_retries; +} __packed; + +struct wmi_peer_fixed_rate_cmd { + /* unique id identifying the VDEV, generated by the caller */ + __le32 vdev_id; + /* peer MAC address */ + struct wmi_mac_addr peer_macaddr; + /* fixed rate */ + struct wmi_fixed_rate peer_fixed_rate; +} __packed; + +#define WMI_MGMT_TID 17 + +struct wmi_addba_clear_resp_cmd { + /* unique id identifying the VDEV, generated by the caller */ + __le32 vdev_id; + /* peer MAC address */ + struct wmi_mac_addr peer_macaddr; +} __packed; + +struct wmi_addba_send_cmd { + /* unique id identifying the VDEV, generated by the caller */ + __le32 vdev_id; + /* peer MAC address */ + struct wmi_mac_addr peer_macaddr; + /* Tid number */ + __le32 tid; + /* Buffer/Window size*/ + __le32 buffersize; +} __packed; + +struct wmi_delba_send_cmd { + /* unique id identifying the VDEV, generated by the caller */ + __le32 vdev_id; + /* peer MAC address */ + struct wmi_mac_addr peer_macaddr; + /* Tid number */ + __le32 tid; + /* Is Initiator */ + __le32 initiator; + /* Reason code */ + __le32 reasoncode; +} __packed; + +struct wmi_addba_setresponse_cmd { + /* unique id identifying the vdev, generated by the caller */ + __le32 vdev_id; + /* peer mac address */ + struct wmi_mac_addr peer_macaddr; + /* Tid number */ + __le32 tid; + /* status code */ + __le32 statuscode; +} __packed; + +struct wmi_send_singleamsdu_cmd { + /* unique id identifying the vdev, generated by the caller */ + __le32 vdev_id; + /* peer mac address */ + struct wmi_mac_addr peer_macaddr; + /* Tid number */ + __le32 tid; +} __packed; + +enum wmi_peer_smps_state { + WMI_PEER_SMPS_PS_NONE = 0x0, + WMI_PEER_SMPS_STATIC = 0x1, + WMI_PEER_SMPS_DYNAMIC = 0x2 +}; + +enum wmi_peer_chwidth { + WMI_PEER_CHWIDTH_20MHZ = 0, + WMI_PEER_CHWIDTH_40MHZ = 1, + WMI_PEER_CHWIDTH_80MHZ = 2, + WMI_PEER_CHWIDTH_160MHZ = 3, +}; + +enum wmi_peer_param { + WMI_PEER_SMPS_STATE = 0x1, /* see %wmi_peer_smps_state */ + WMI_PEER_AMPDU = 0x2, + WMI_PEER_AUTHORIZE = 0x3, + WMI_PEER_CHAN_WIDTH = 0x4, + WMI_PEER_NSS = 0x5, + WMI_PEER_USE_4ADDR = 0x6, + WMI_PEER_USE_FIXED_PWR = 0x8, + WMI_PEER_PARAM_FIXED_RATE = 0x9, + WMI_PEER_DEBUG = 0xa, + WMI_PEER_PHYMODE = 0xd, + WMI_PEER_DUMMY_VAR = 0xff, /* dummy parameter for STA PS workaround */ +}; + +struct wmi_peer_set_param_cmd { + __le32 vdev_id; + struct wmi_mac_addr peer_macaddr; + __le32 param_id; + __le32 param_value; +} __packed; + +#define MAX_SUPPORTED_RATES 128 + +struct wmi_rate_set { + /* total number of rates */ + __le32 num_rates; + /* + * rates (each 8bit value) packed into a 32 bit word. + * the rates are filled from least significant byte to most + * significant byte. + */ + __le32 rates[(MAX_SUPPORTED_RATES / 4) + 1]; +} __packed; + +struct wmi_rate_set_arg { + unsigned int num_rates; + u8 rates[MAX_SUPPORTED_RATES]; +}; + +/* + * NOTE: It would bea good idea to represent the Tx MCS + * info in one word and Rx in another word. This is split + * into multiple words for convenience + */ +struct wmi_vht_rate_set { + __le32 rx_max_rate; /* Max Rx data rate */ + __le32 rx_mcs_set; /* Negotiated RX VHT rates */ + __le32 tx_max_rate; /* Max Tx data rate */ + __le32 tx_mcs_set; /* Negotiated TX VHT rates */ +} __packed; + +struct wmi_vht_rate_set_arg { + u32 rx_max_rate; + u32 rx_mcs_set; + u32 tx_max_rate; + u32 tx_mcs_set; +}; + +struct wmi_peer_set_rates_cmd { + /* peer MAC address */ + struct wmi_mac_addr peer_macaddr; + /* legacy rate set */ + struct wmi_rate_set peer_legacy_rates; + /* ht rate set */ + struct wmi_rate_set peer_ht_rates; +} __packed; + +struct wmi_peer_set_q_empty_callback_cmd { + /* unique id identifying the VDEV, generated by the caller */ + __le32 vdev_id; + /* peer MAC address */ + struct wmi_mac_addr peer_macaddr; + __le32 callback_enable; +} __packed; + +struct wmi_peer_flags_map { + u32 auth; + u32 qos; + u32 need_ptk_4_way; + u32 need_gtk_2_way; + u32 apsd; + u32 ht; + u32 bw40; + u32 stbc; + u32 ldbc; + u32 dyn_mimops; + u32 static_mimops; + u32 spatial_mux; + u32 vht; + u32 bw80; + u32 vht_2g; + u32 pmf; + u32 bw160; +}; + +enum wmi_peer_flags { + WMI_PEER_AUTH = 0x00000001, + WMI_PEER_QOS = 0x00000002, + WMI_PEER_NEED_PTK_4_WAY = 0x00000004, + WMI_PEER_NEED_GTK_2_WAY = 0x00000010, + WMI_PEER_APSD = 0x00000800, + WMI_PEER_HT = 0x00001000, + WMI_PEER_40MHZ = 0x00002000, + WMI_PEER_STBC = 0x00008000, + WMI_PEER_LDPC = 0x00010000, + WMI_PEER_DYN_MIMOPS = 0x00020000, + WMI_PEER_STATIC_MIMOPS = 0x00040000, + WMI_PEER_SPATIAL_MUX = 0x00200000, + WMI_PEER_VHT = 0x02000000, + WMI_PEER_80MHZ = 0x04000000, + WMI_PEER_VHT_2G = 0x08000000, + WMI_PEER_PMF = 0x10000000, + WMI_PEER_160MHZ = 0x20000000 +}; + +enum wmi_10x_peer_flags { + WMI_10X_PEER_AUTH = 0x00000001, + WMI_10X_PEER_QOS = 0x00000002, + WMI_10X_PEER_NEED_PTK_4_WAY = 0x00000004, + WMI_10X_PEER_NEED_GTK_2_WAY = 0x00000010, + WMI_10X_PEER_APSD = 0x00000800, + WMI_10X_PEER_HT = 0x00001000, + WMI_10X_PEER_40MHZ = 0x00002000, + WMI_10X_PEER_STBC = 0x00008000, + WMI_10X_PEER_LDPC = 0x00010000, + WMI_10X_PEER_DYN_MIMOPS = 0x00020000, + WMI_10X_PEER_STATIC_MIMOPS = 0x00040000, + WMI_10X_PEER_SPATIAL_MUX = 0x00200000, + WMI_10X_PEER_VHT = 0x02000000, + WMI_10X_PEER_80MHZ = 0x04000000, + WMI_10X_PEER_160MHZ = 0x20000000 +}; + +enum wmi_10_2_peer_flags { + WMI_10_2_PEER_AUTH = 0x00000001, + WMI_10_2_PEER_QOS = 0x00000002, + WMI_10_2_PEER_NEED_PTK_4_WAY = 0x00000004, + WMI_10_2_PEER_NEED_GTK_2_WAY = 0x00000010, + WMI_10_2_PEER_APSD = 0x00000800, + WMI_10_2_PEER_HT = 0x00001000, + WMI_10_2_PEER_40MHZ = 0x00002000, + WMI_10_2_PEER_STBC = 0x00008000, + WMI_10_2_PEER_LDPC = 0x00010000, + WMI_10_2_PEER_DYN_MIMOPS = 0x00020000, + WMI_10_2_PEER_STATIC_MIMOPS = 0x00040000, + WMI_10_2_PEER_SPATIAL_MUX = 0x00200000, + WMI_10_2_PEER_VHT = 0x02000000, + WMI_10_2_PEER_80MHZ = 0x04000000, + WMI_10_2_PEER_VHT_2G = 0x08000000, + WMI_10_2_PEER_PMF = 0x10000000, + WMI_10_2_PEER_160MHZ = 0x20000000 +}; + +/* + * Peer rate capabilities. + * + * This is of interest to the ratecontrol + * module which resides in the firmware. The bit definitions are + * consistent with that defined in if_athrate.c. + */ +#define WMI_RC_DS_FLAG 0x01 +#define WMI_RC_CW40_FLAG 0x02 +#define WMI_RC_SGI_FLAG 0x04 +#define WMI_RC_HT_FLAG 0x08 +#define WMI_RC_RTSCTS_FLAG 0x10 +#define WMI_RC_TX_STBC_FLAG 0x20 +#define WMI_RC_RX_STBC_FLAG 0xC0 +#define WMI_RC_RX_STBC_FLAG_S 6 +#define WMI_RC_WEP_TKIP_FLAG 0x100 +#define WMI_RC_TS_FLAG 0x200 +#define WMI_RC_UAPSD_FLAG 0x400 + +/* Maximum listen interval supported by hw in units of beacon interval */ +#define ATH10K_MAX_HW_LISTEN_INTERVAL 5 + +struct wmi_common_peer_assoc_complete_cmd { + struct wmi_mac_addr peer_macaddr; + __le32 vdev_id; + __le32 peer_new_assoc; /* 1=assoc, 0=reassoc */ + __le32 peer_associd; /* 16 LSBs */ + __le32 peer_flags; + __le32 peer_caps; /* 16 LSBs */ + __le32 peer_listen_intval; + __le32 peer_ht_caps; + __le32 peer_max_mpdu; + __le32 peer_mpdu_density; /* 0..16 */ + __le32 peer_rate_caps; + struct wmi_rate_set peer_legacy_rates; + struct wmi_rate_set peer_ht_rates; + __le32 peer_nss; /* num of spatial streams */ + __le32 peer_vht_caps; + __le32 peer_phymode; + struct wmi_vht_rate_set peer_vht_rates; +}; + +struct wmi_main_peer_assoc_complete_cmd { + struct wmi_common_peer_assoc_complete_cmd cmd; + + /* HT Operation Element of the peer. Five bytes packed in 2 + * INT32 array and filled from lsb to msb. + */ + __le32 peer_ht_info[2]; +} __packed; + +struct wmi_10_1_peer_assoc_complete_cmd { + struct wmi_common_peer_assoc_complete_cmd cmd; +} __packed; + +#define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_LSB 0 +#define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_MASK 0x0f +#define WMI_PEER_ASSOC_INFO0_MAX_NSS_LSB 4 +#define WMI_PEER_ASSOC_INFO0_MAX_NSS_MASK 0xf0 + +struct wmi_10_2_peer_assoc_complete_cmd { + struct wmi_common_peer_assoc_complete_cmd cmd; + __le32 info0; /* WMI_PEER_ASSOC_INFO0_ */ +} __packed; + +/* NSS Mapping to FW */ +#define WMI_PEER_NSS_MAP_ENABLE BIT(31) +#define WMI_PEER_NSS_160MHZ_MASK GENMASK(2, 0) +#define WMI_PEER_NSS_80_80MHZ_MASK GENMASK(5, 3) + +struct wmi_10_4_peer_assoc_complete_cmd { + struct wmi_10_2_peer_assoc_complete_cmd cmd; + __le32 peer_bw_rxnss_override; +} __packed; + +struct wmi_peer_assoc_complete_arg { + u8 addr[ETH_ALEN]; + u32 vdev_id; + bool peer_reassoc; + u16 peer_aid; + u32 peer_flags; /* see %WMI_PEER_ */ + u16 peer_caps; + u32 peer_listen_intval; + u32 peer_ht_caps; + u32 peer_max_mpdu; + u32 peer_mpdu_density; /* 0..16 */ + u32 peer_rate_caps; /* see %WMI_RC_ */ + struct wmi_rate_set_arg peer_legacy_rates; + struct wmi_rate_set_arg peer_ht_rates; + u32 peer_num_spatial_streams; + u32 peer_vht_caps; + enum wmi_phy_mode peer_phymode; + struct wmi_vht_rate_set_arg peer_vht_rates; + u32 peer_bw_rxnss_override; +}; + +struct wmi_peer_add_wds_entry_cmd { + /* peer MAC address */ + struct wmi_mac_addr peer_macaddr; + /* wds MAC addr */ + struct wmi_mac_addr wds_macaddr; +} __packed; + +struct wmi_peer_remove_wds_entry_cmd { + /* wds MAC addr */ + struct wmi_mac_addr wds_macaddr; +} __packed; + +struct wmi_peer_q_empty_callback_event { + /* peer MAC address */ + struct wmi_mac_addr peer_macaddr; +} __packed; + +/* + * Channel info WMI event + */ +struct wmi_chan_info_event { + __le32 err_code; + __le32 freq; + __le32 cmd_flags; + __le32 noise_floor; + __le32 rx_clear_count; + __le32 cycle_count; +} __packed; + +struct wmi_10_4_chan_info_event { + __le32 err_code; + __le32 freq; + __le32 cmd_flags; + __le32 noise_floor; + __le32 rx_clear_count; + __le32 cycle_count; + __le32 chan_tx_pwr_range; + __le32 chan_tx_pwr_tp; + __le32 rx_frame_count; +} __packed; + +struct wmi_peer_sta_kickout_event { + struct wmi_mac_addr peer_macaddr; +} __packed; + +#define WMI_CHAN_INFO_FLAG_COMPLETE BIT(0) +#define WMI_CHAN_INFO_FLAG_PRE_COMPLETE BIT(1) + +/* Beacon filter wmi command info */ +#define BCN_FLT_MAX_SUPPORTED_IES 256 +#define BCN_FLT_MAX_ELEMS_IE_LIST (BCN_FLT_MAX_SUPPORTED_IES / 32) + +struct bss_bcn_stats { + __le32 vdev_id; + __le32 bss_bcnsdropped; + __le32 bss_bcnsdelivered; +} __packed; + +struct bcn_filter_stats { + __le32 bcns_dropped; + __le32 bcns_delivered; + __le32 activefilters; + struct bss_bcn_stats bss_stats; +} __packed; + +struct wmi_add_bcn_filter_cmd { + u32 vdev_id; + u32 ie_map[BCN_FLT_MAX_ELEMS_IE_LIST]; +} __packed; + +enum wmi_sta_keepalive_method { + WMI_STA_KEEPALIVE_METHOD_NULL_FRAME = 1, + WMI_STA_KEEPALIVE_METHOD_UNSOLICITATED_ARP_RESPONSE = 2, +}; + +#define WMI_STA_KEEPALIVE_INTERVAL_DISABLE 0 + +/* Firmware crashes if keepalive interval exceeds this limit */ +#define WMI_STA_KEEPALIVE_INTERVAL_MAX_SECONDS 0xffff + +/* note: ip4 addresses are in network byte order, i.e. big endian */ +struct wmi_sta_keepalive_arp_resp { + __be32 src_ip4_addr; + __be32 dest_ip4_addr; + struct wmi_mac_addr dest_mac_addr; +} __packed; + +struct wmi_sta_keepalive_cmd { + __le32 vdev_id; + __le32 enabled; + __le32 method; /* WMI_STA_KEEPALIVE_METHOD_ */ + __le32 interval; /* in seconds */ + struct wmi_sta_keepalive_arp_resp arp_resp; +} __packed; + +struct wmi_sta_keepalive_arg { + u32 vdev_id; + u32 enabled; + u32 method; + u32 interval; + __be32 src_ip4_addr; + __be32 dest_ip4_addr; + const u8 dest_mac_addr[ETH_ALEN]; +}; + +enum wmi_force_fw_hang_type { + WMI_FORCE_FW_HANG_ASSERT = 1, + WMI_FORCE_FW_HANG_NO_DETECT, + WMI_FORCE_FW_HANG_CTRL_EP_FULL, + WMI_FORCE_FW_HANG_EMPTY_POINT, + WMI_FORCE_FW_HANG_STACK_OVERFLOW, + WMI_FORCE_FW_HANG_INFINITE_LOOP, +}; + +#define WMI_FORCE_FW_HANG_RANDOM_TIME 0xFFFFFFFF + +struct wmi_force_fw_hang_cmd { + __le32 type; + __le32 delay_ms; +} __packed; + +enum wmi_pdev_reset_mode_type { + WMI_RST_MODE_TX_FLUSH = 1, + WMI_RST_MODE_WARM_RESET, + WMI_RST_MODE_COLD_RESET, + WMI_RST_MODE_WARM_RESET_RESTORE_CAL, + WMI_RST_MODE_COLD_RESET_RESTORE_CAL, + WMI_RST_MODE_MAX, +}; + +enum ath10k_dbglog_level { + ATH10K_DBGLOG_LEVEL_VERBOSE = 0, + ATH10K_DBGLOG_LEVEL_INFO = 1, + ATH10K_DBGLOG_LEVEL_WARN = 2, + ATH10K_DBGLOG_LEVEL_ERR = 3, +}; + +/* VAP ids to enable dbglog */ +#define ATH10K_DBGLOG_CFG_VAP_LOG_LSB 0 +#define ATH10K_DBGLOG_CFG_VAP_LOG_MASK 0x0000ffff + +/* to enable dbglog in the firmware */ +#define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_LSB 16 +#define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_MASK 0x00010000 + +/* timestamp resolution */ +#define ATH10K_DBGLOG_CFG_RESOLUTION_LSB 17 +#define ATH10K_DBGLOG_CFG_RESOLUTION_MASK 0x000E0000 + +/* number of queued messages before sending them to the host */ +#define ATH10K_DBGLOG_CFG_REPORT_SIZE_LSB 20 +#define ATH10K_DBGLOG_CFG_REPORT_SIZE_MASK 0x0ff00000 + +/* + * Log levels to enable. This defines the minimum level to enable, this is + * not a bitmask. See enum ath10k_dbglog_level for the values. + */ +#define ATH10K_DBGLOG_CFG_LOG_LVL_LSB 28 +#define ATH10K_DBGLOG_CFG_LOG_LVL_MASK 0x70000000 + +/* + * Note: this is a cleaned up version of a struct firmware uses. For + * example, config_valid was hidden inside an array. + */ +struct wmi_dbglog_cfg_cmd { + /* bitmask to hold mod id config*/ + __le32 module_enable; + + /* see ATH10K_DBGLOG_CFG_ */ + __le32 config_enable; + + /* mask of module id bits to be changed */ + __le32 module_valid; + + /* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */ + __le32 config_valid; +} __packed; + +struct wmi_10_4_dbglog_cfg_cmd { + /* bitmask to hold mod id config*/ + __le64 module_enable; + + /* see ATH10K_DBGLOG_CFG_ */ + __le32 config_enable; + + /* mask of module id bits to be changed */ + __le64 module_valid; + + /* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */ + __le32 config_valid; +} __packed; + +enum wmi_roam_reason { + WMI_ROAM_REASON_BETTER_AP = 1, + WMI_ROAM_REASON_BEACON_MISS = 2, + WMI_ROAM_REASON_LOW_RSSI = 3, + WMI_ROAM_REASON_SUITABLE_AP_FOUND = 4, + WMI_ROAM_REASON_HO_FAILED = 5, + + /* keep last */ + WMI_ROAM_REASON_MAX, +}; + +struct wmi_roam_ev { + __le32 vdev_id; + __le32 reason; +} __packed; + +#define ATH10K_FRAGMT_THRESHOLD_MIN 540 +#define ATH10K_FRAGMT_THRESHOLD_MAX 2346 + +#define WMI_MAX_EVENT 0x1000 +/* Maximum number of pending TXed WMI packets */ +#define WMI_SKB_HEADROOM sizeof(struct wmi_cmd_hdr) + +/* By default disable power save for IBSS */ +#define ATH10K_DEFAULT_ATIM 0 + +#define WMI_MAX_MEM_REQS 16 + +struct wmi_scan_ev_arg { + __le32 event_type; /* %WMI_SCAN_EVENT_ */ + __le32 reason; /* %WMI_SCAN_REASON_ */ + __le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */ + __le32 scan_req_id; + __le32 scan_id; + __le32 vdev_id; +}; + +struct mgmt_tx_compl_params { + u32 desc_id; + u32 status; + u32 ppdu_id; + int ack_rssi; +}; + +struct wmi_tlv_mgmt_tx_compl_ev_arg { + __le32 desc_id; + __le32 status; + __le32 pdev_id; + __le32 ppdu_id; + __le32 ack_rssi; +}; + +struct wmi_tlv_mgmt_tx_bundle_compl_ev_arg { + __le32 num_reports; + const __le32 *desc_ids; + const __le32 *status; + const __le32 *ppdu_ids; + const __le32 *ack_rssi; +}; + +struct wmi_peer_delete_resp_ev_arg { + __le32 vdev_id; + struct wmi_mac_addr peer_addr; +}; + +#define WMI_MGMT_RX_NUM_RSSI 4 +struct wmi_mgmt_rx_ev_arg { + __le32 channel; + __le32 snr; + __le32 rate; + __le32 phy_mode; + __le32 buf_len; + __le32 status; /* %WMI_RX_STATUS_ */ + struct wmi_mgmt_rx_ext_info ext_info; + __le32 rssi[WMI_MGMT_RX_NUM_RSSI]; +}; + +struct wmi_ch_info_ev_arg { + __le32 err_code; + __le32 freq; + __le32 cmd_flags; + __le32 noise_floor; + __le32 rx_clear_count; + __le32 cycle_count; + __le32 chan_tx_pwr_range; + __le32 chan_tx_pwr_tp; + __le32 rx_frame_count; + __le32 my_bss_rx_cycle_count; + __le32 rx_11b_mode_data_duration; + __le32 tx_frame_cnt; + __le32 mac_clk_mhz; +}; + +/* From 10.4 firmware, not sure all have the same values. */ +enum wmi_vdev_start_status { + WMI_VDEV_START_OK = 0, + WMI_VDEV_START_CHAN_INVALID, +}; + +struct wmi_vdev_start_ev_arg { + __le32 vdev_id; + __le32 req_id; + __le32 resp_type; /* %WMI_VDEV_RESP_ */ + __le32 status; /* See wmi_vdev_start_status enum above */ +}; + +struct wmi_peer_kick_ev_arg { + const u8 *mac_addr; +}; + +struct wmi_swba_ev_arg { + __le32 vdev_map; + struct wmi_tim_info_arg tim_info[WMI_MAX_AP_VDEV]; + const struct wmi_p2p_noa_info *noa_info[WMI_MAX_AP_VDEV]; +}; + +struct wmi_phyerr_ev_arg { + u32 tsf_timestamp; + u16 freq1; + u16 freq2; + u8 rssi_combined; + u8 chan_width_mhz; + u8 phy_err_code; + u16 nf_chains[4]; + u32 buf_len; + const u8 *buf; + u8 hdr_len; +}; + +struct wmi_phyerr_hdr_arg { + u32 num_phyerrs; + u32 tsf_l32; + u32 tsf_u32; + u32 buf_len; + const void *phyerrs; +}; + +struct wmi_dfs_status_ev_arg { + u32 status; +}; + +struct wmi_svc_rdy_ev_arg { + __le32 min_tx_power; + __le32 max_tx_power; + __le32 ht_cap; + __le32 vht_cap; + __le32 vht_supp_mcs; + __le32 sw_ver0; + __le32 sw_ver1; + __le32 fw_build; + __le32 phy_capab; + __le32 num_rf_chains; + __le32 eeprom_rd; + __le32 num_mem_reqs; + __le32 low_2ghz_chan; + __le32 high_2ghz_chan; + __le32 low_5ghz_chan; + __le32 high_5ghz_chan; + __le32 sys_cap_info; + const __le32 *service_map; + size_t service_map_len; + const struct wlan_host_mem_req *mem_reqs[WMI_MAX_MEM_REQS]; +}; + +struct wmi_svc_avail_ev_arg { + bool service_map_ext_valid; + __le32 service_map_ext_len; + const __le32 *service_map_ext; +}; + +struct wmi_rdy_ev_arg { + __le32 sw_version; + __le32 abi_version; + __le32 status; + const u8 *mac_addr; +}; + +struct wmi_roam_ev_arg { + __le32 vdev_id; + __le32 reason; + __le32 rssi; +}; + +struct wmi_echo_ev_arg { + __le32 value; +}; + +struct wmi_pdev_temperature_event { + /* temperature value in Celcius degree */ + __le32 temperature; +} __packed; + +struct wmi_pdev_bss_chan_info_event { + __le32 freq; + __le32 noise_floor; + __le64 cycle_busy; + __le64 cycle_total; + __le64 cycle_tx; + __le64 cycle_rx; + __le64 cycle_rx_bss; + __le32 reserved; +} __packed; + +/* WOW structures */ +enum wmi_wow_wakeup_event { + WOW_BMISS_EVENT = 0, + WOW_BETTER_AP_EVENT, + WOW_DEAUTH_RECVD_EVENT, + WOW_MAGIC_PKT_RECVD_EVENT, + WOW_GTK_ERR_EVENT, + WOW_FOURWAY_HSHAKE_EVENT, + WOW_EAPOL_RECVD_EVENT, + WOW_NLO_DETECTED_EVENT, + WOW_DISASSOC_RECVD_EVENT, + WOW_PATTERN_MATCH_EVENT, + WOW_CSA_IE_EVENT, + WOW_PROBE_REQ_WPS_IE_EVENT, + WOW_AUTH_REQ_EVENT, + WOW_ASSOC_REQ_EVENT, + WOW_HTT_EVENT, + WOW_RA_MATCH_EVENT, + WOW_HOST_AUTO_SHUTDOWN_EVENT, + WOW_IOAC_MAGIC_EVENT, + WOW_IOAC_SHORT_EVENT, + WOW_IOAC_EXTEND_EVENT, + WOW_IOAC_TIMER_EVENT, + WOW_DFS_PHYERR_RADAR_EVENT, + WOW_BEACON_EVENT, + WOW_CLIENT_KICKOUT_EVENT, + WOW_EVENT_MAX, +}; + +#define C2S(x) case x: return #x + +static inline const char *wow_wakeup_event(enum wmi_wow_wakeup_event ev) +{ + switch (ev) { + C2S(WOW_BMISS_EVENT); + C2S(WOW_BETTER_AP_EVENT); + C2S(WOW_DEAUTH_RECVD_EVENT); + C2S(WOW_MAGIC_PKT_RECVD_EVENT); + C2S(WOW_GTK_ERR_EVENT); + C2S(WOW_FOURWAY_HSHAKE_EVENT); + C2S(WOW_EAPOL_RECVD_EVENT); + C2S(WOW_NLO_DETECTED_EVENT); + C2S(WOW_DISASSOC_RECVD_EVENT); + C2S(WOW_PATTERN_MATCH_EVENT); + C2S(WOW_CSA_IE_EVENT); + C2S(WOW_PROBE_REQ_WPS_IE_EVENT); + C2S(WOW_AUTH_REQ_EVENT); + C2S(WOW_ASSOC_REQ_EVENT); + C2S(WOW_HTT_EVENT); + C2S(WOW_RA_MATCH_EVENT); + C2S(WOW_HOST_AUTO_SHUTDOWN_EVENT); + C2S(WOW_IOAC_MAGIC_EVENT); + C2S(WOW_IOAC_SHORT_EVENT); + C2S(WOW_IOAC_EXTEND_EVENT); + C2S(WOW_IOAC_TIMER_EVENT); + C2S(WOW_DFS_PHYERR_RADAR_EVENT); + C2S(WOW_BEACON_EVENT); + C2S(WOW_CLIENT_KICKOUT_EVENT); + C2S(WOW_EVENT_MAX); + default: + return NULL; + } +} + +enum wmi_wow_wake_reason { + WOW_REASON_UNSPECIFIED = -1, + WOW_REASON_NLOD = 0, + WOW_REASON_AP_ASSOC_LOST, + WOW_REASON_LOW_RSSI, + WOW_REASON_DEAUTH_RECVD, + WOW_REASON_DISASSOC_RECVD, + WOW_REASON_GTK_HS_ERR, + WOW_REASON_EAP_REQ, + WOW_REASON_FOURWAY_HS_RECV, + WOW_REASON_TIMER_INTR_RECV, + WOW_REASON_PATTERN_MATCH_FOUND, + WOW_REASON_RECV_MAGIC_PATTERN, + WOW_REASON_P2P_DISC, + WOW_REASON_WLAN_HB, + WOW_REASON_CSA_EVENT, + WOW_REASON_PROBE_REQ_WPS_IE_RECV, + WOW_REASON_AUTH_REQ_RECV, + WOW_REASON_ASSOC_REQ_RECV, + WOW_REASON_HTT_EVENT, + WOW_REASON_RA_MATCH, + WOW_REASON_HOST_AUTO_SHUTDOWN, + WOW_REASON_IOAC_MAGIC_EVENT, + WOW_REASON_IOAC_SHORT_EVENT, + WOW_REASON_IOAC_EXTEND_EVENT, + WOW_REASON_IOAC_TIMER_EVENT, + WOW_REASON_ROAM_HO, + WOW_REASON_DFS_PHYERR_RADADR_EVENT, + WOW_REASON_BEACON_RECV, + WOW_REASON_CLIENT_KICKOUT_EVENT, + WOW_REASON_DEBUG_TEST = 0xFF, +}; + +static inline const char *wow_reason(enum wmi_wow_wake_reason reason) +{ + switch (reason) { + C2S(WOW_REASON_UNSPECIFIED); + C2S(WOW_REASON_NLOD); + C2S(WOW_REASON_AP_ASSOC_LOST); + C2S(WOW_REASON_LOW_RSSI); + C2S(WOW_REASON_DEAUTH_RECVD); + C2S(WOW_REASON_DISASSOC_RECVD); + C2S(WOW_REASON_GTK_HS_ERR); + C2S(WOW_REASON_EAP_REQ); + C2S(WOW_REASON_FOURWAY_HS_RECV); + C2S(WOW_REASON_TIMER_INTR_RECV); + C2S(WOW_REASON_PATTERN_MATCH_FOUND); + C2S(WOW_REASON_RECV_MAGIC_PATTERN); + C2S(WOW_REASON_P2P_DISC); + C2S(WOW_REASON_WLAN_HB); + C2S(WOW_REASON_CSA_EVENT); + C2S(WOW_REASON_PROBE_REQ_WPS_IE_RECV); + C2S(WOW_REASON_AUTH_REQ_RECV); + C2S(WOW_REASON_ASSOC_REQ_RECV); + C2S(WOW_REASON_HTT_EVENT); + C2S(WOW_REASON_RA_MATCH); + C2S(WOW_REASON_HOST_AUTO_SHUTDOWN); + C2S(WOW_REASON_IOAC_MAGIC_EVENT); + C2S(WOW_REASON_IOAC_SHORT_EVENT); + C2S(WOW_REASON_IOAC_EXTEND_EVENT); + C2S(WOW_REASON_IOAC_TIMER_EVENT); + C2S(WOW_REASON_ROAM_HO); + C2S(WOW_REASON_DFS_PHYERR_RADADR_EVENT); + C2S(WOW_REASON_BEACON_RECV); + C2S(WOW_REASON_CLIENT_KICKOUT_EVENT); + C2S(WOW_REASON_DEBUG_TEST); + default: + return NULL; + } +} + +#undef C2S + +struct wmi_wow_ev_arg { + u32 vdev_id; + u32 flag; + enum wmi_wow_wake_reason wake_reason; + u32 data_len; +}; + +#define WOW_MIN_PATTERN_SIZE 1 +#define WOW_MAX_PATTERN_SIZE 148 +#define WOW_MAX_PKT_OFFSET 128 +#define WOW_HDR_LEN (sizeof(struct ieee80211_hdr_3addr) + \ + sizeof(struct rfc1042_hdr)) +#define WOW_MAX_REDUCE (WOW_HDR_LEN - sizeof(struct ethhdr) - \ + offsetof(struct ieee80211_hdr_3addr, addr1)) + +enum wmi_tdls_state { + WMI_TDLS_DISABLE, + WMI_TDLS_ENABLE_PASSIVE, + WMI_TDLS_ENABLE_ACTIVE, + WMI_TDLS_ENABLE_ACTIVE_EXTERNAL_CONTROL, +}; + +enum wmi_tdls_peer_state { + WMI_TDLS_PEER_STATE_PEERING, + WMI_TDLS_PEER_STATE_CONNECTED, + WMI_TDLS_PEER_STATE_TEARDOWN, +}; + +struct wmi_tdls_peer_update_cmd_arg { + u32 vdev_id; + enum wmi_tdls_peer_state peer_state; + u8 addr[ETH_ALEN]; +}; + +#define WMI_TDLS_MAX_SUPP_OPER_CLASSES 32 + +#define WMI_TDLS_PEER_SP_MASK 0x60 +#define WMI_TDLS_PEER_SP_LSB 5 + +enum wmi_tdls_options { + WMI_TDLS_OFFCHAN_EN = BIT(0), + WMI_TDLS_BUFFER_STA_EN = BIT(1), + WMI_TDLS_SLEEP_STA_EN = BIT(2), +}; + +enum { + WMI_TDLS_PEER_QOS_AC_VO = BIT(0), + WMI_TDLS_PEER_QOS_AC_VI = BIT(1), + WMI_TDLS_PEER_QOS_AC_BK = BIT(2), + WMI_TDLS_PEER_QOS_AC_BE = BIT(3), +}; + +struct wmi_tdls_peer_capab_arg { + u8 peer_uapsd_queues; + u8 peer_max_sp; + u32 buff_sta_support; + u32 off_chan_support; + u32 peer_curr_operclass; + u32 self_curr_operclass; + u32 peer_chan_len; + u32 peer_operclass_len; + u8 peer_operclass[WMI_TDLS_MAX_SUPP_OPER_CLASSES]; + u32 is_peer_responder; + u32 pref_offchan_num; + u32 pref_offchan_bw; +}; + +struct wmi_10_4_tdls_set_state_cmd { + __le32 vdev_id; + __le32 state; + __le32 notification_interval_ms; + __le32 tx_discovery_threshold; + __le32 tx_teardown_threshold; + __le32 rssi_teardown_threshold; + __le32 rssi_delta; + __le32 tdls_options; + __le32 tdls_peer_traffic_ind_window; + __le32 tdls_peer_traffic_response_timeout_ms; + __le32 tdls_puapsd_mask; + __le32 tdls_puapsd_inactivity_time_ms; + __le32 tdls_puapsd_rx_frame_threshold; + __le32 teardown_notification_ms; + __le32 tdls_peer_kickout_threshold; +} __packed; + +struct wmi_tdls_peer_capabilities { + __le32 peer_qos; + __le32 buff_sta_support; + __le32 off_chan_support; + __le32 peer_curr_operclass; + __le32 self_curr_operclass; + __le32 peer_chan_len; + __le32 peer_operclass_len; + u8 peer_operclass[WMI_TDLS_MAX_SUPP_OPER_CLASSES]; + __le32 is_peer_responder; + __le32 pref_offchan_num; + __le32 pref_offchan_bw; + struct wmi_channel peer_chan_list[1]; +} __packed; + +struct wmi_10_4_tdls_peer_update_cmd { + __le32 vdev_id; + struct wmi_mac_addr peer_macaddr; + __le32 peer_state; + __le32 reserved[4]; + struct wmi_tdls_peer_capabilities peer_capab; +} __packed; + +enum wmi_tdls_peer_reason { + WMI_TDLS_TEARDOWN_REASON_TX, + WMI_TDLS_TEARDOWN_REASON_RSSI, + WMI_TDLS_TEARDOWN_REASON_SCAN, + WMI_TDLS_DISCONNECTED_REASON_PEER_DELETE, + WMI_TDLS_TEARDOWN_REASON_PTR_TIMEOUT, + WMI_TDLS_TEARDOWN_REASON_BAD_PTR, + WMI_TDLS_TEARDOWN_REASON_NO_RESPONSE, + WMI_TDLS_ENTER_BUF_STA, + WMI_TDLS_EXIT_BUF_STA, + WMI_TDLS_ENTER_BT_BUSY_MODE, + WMI_TDLS_EXIT_BT_BUSY_MODE, + WMI_TDLS_SCAN_STARTED_EVENT, + WMI_TDLS_SCAN_COMPLETED_EVENT, +}; + +enum wmi_tdls_peer_notification { + WMI_TDLS_SHOULD_DISCOVER, + WMI_TDLS_SHOULD_TEARDOWN, + WMI_TDLS_PEER_DISCONNECTED, + WMI_TDLS_CONNECTION_TRACKER_NOTIFICATION, +}; + +struct wmi_tdls_peer_event { + struct wmi_mac_addr peer_macaddr; + /* see enum wmi_tdls_peer_notification*/ + __le32 peer_status; + /* see enum wmi_tdls_peer_reason */ + __le32 peer_reason; + __le32 vdev_id; +} __packed; + +enum wmi_tid_aggr_control_conf { + WMI_TID_CONFIG_AGGR_CONTROL_IGNORE, + WMI_TID_CONFIG_AGGR_CONTROL_ENABLE, + WMI_TID_CONFIG_AGGR_CONTROL_DISABLE, +}; + +enum wmi_noack_tid_conf { + WMI_NOACK_TID_CONFIG_IGNORE_ACK_POLICY, + WMI_PEER_TID_CONFIG_ACK, + WMI_PEER_TID_CONFIG_NOACK, +}; + +enum wmi_tid_rate_ctrl_conf { + WMI_TID_CONFIG_RATE_CONTROL_IGNORE, + WMI_TID_CONFIG_RATE_CONTROL_AUTO, + WMI_TID_CONFIG_RATE_CONTROL_FIXED_RATE, + WMI_TID_CONFIG_RATE_CONTROL_DEFAULT_LOWEST_RATE, + WMI_PEER_TID_CONFIG_RATE_UPPER_CAP, +}; + +enum wmi_tid_rtscts_control_conf { + WMI_TID_CONFIG_RTSCTS_CONTROL_ENABLE, + WMI_TID_CONFIG_RTSCTS_CONTROL_DISABLE, +}; + +enum wmi_ext_tid_config_map { + WMI_EXT_TID_RTS_CTS_CONFIG = BIT(0), +}; + +struct wmi_per_peer_per_tid_cfg_arg { + u32 vdev_id; + struct wmi_mac_addr peer_macaddr; + u32 tid; + enum wmi_noack_tid_conf ack_policy; + enum wmi_tid_aggr_control_conf aggr_control; + u8 rate_ctrl; + u32 retry_count; + u32 rcode_flags; + u32 ext_tid_cfg_bitmap; + u32 rtscts_ctrl; +}; + +struct wmi_peer_per_tid_cfg_cmd { + __le32 vdev_id; + struct wmi_mac_addr peer_macaddr; + __le32 tid; + + /* see enum wmi_noack_tid_conf */ + __le32 ack_policy; + + /* see enum wmi_tid_aggr_control_conf */ + __le32 aggr_control; + + /* see enum wmi_tid_rate_ctrl_conf */ + __le32 rate_control; + __le32 rcode_flags; + __le32 retry_count; + + /* See enum wmi_ext_tid_config_map */ + __le32 ext_tid_cfg_bitmap; + + /* see enum wmi_tid_rtscts_control_conf */ + __le32 rtscts_ctrl; +} __packed; + +enum wmi_txbf_conf { + WMI_TXBF_CONF_UNSUPPORTED, + WMI_TXBF_CONF_BEFORE_ASSOC, + WMI_TXBF_CONF_AFTER_ASSOC, +}; + +#define WMI_CCA_DETECT_LEVEL_AUTO 0 +#define WMI_CCA_DETECT_MARGIN_AUTO 0 + +struct wmi_pdev_set_adaptive_cca_params { + __le32 enable; + __le32 cca_detect_level; + __le32 cca_detect_margin; +} __packed; + +#define WMI_PNO_MAX_SCHED_SCAN_PLANS 2 +#define WMI_PNO_MAX_SCHED_SCAN_PLAN_INT 7200 +#define WMI_PNO_MAX_SCHED_SCAN_PLAN_ITRNS 100 +#define WMI_PNO_MAX_NETW_CHANNELS 26 +#define WMI_PNO_MAX_NETW_CHANNELS_EX 60 +#define WMI_PNO_MAX_SUPP_NETWORKS WLAN_SCAN_PARAMS_MAX_SSID +#define WMI_PNO_MAX_IE_LENGTH WLAN_SCAN_PARAMS_MAX_IE_LEN + +/*size based of dot11 declaration without extra IEs as we will not carry those for PNO*/ +#define WMI_PNO_MAX_PB_REQ_SIZE 450 + +#define WMI_PNO_24G_DEFAULT_CH 1 +#define WMI_PNO_5G_DEFAULT_CH 36 + +#define WMI_ACTIVE_MAX_CHANNEL_TIME 40 +#define WMI_PASSIVE_MAX_CHANNEL_TIME 110 + +/* SSID broadcast type */ +enum wmi_SSID_bcast_type { + BCAST_UNKNOWN = 0, + BCAST_NORMAL = 1, + BCAST_HIDDEN = 2, +}; + +struct wmi_network_type { + struct wmi_ssid ssid; + u32 authentication; + u32 encryption; + u32 bcast_nw_type; + u8 channel_count; + u16 channels[WMI_PNO_MAX_NETW_CHANNELS_EX]; + s32 rssi_threshold; +} __packed; + +struct wmi_pno_scan_req { + u8 enable; + u8 vdev_id; + u8 uc_networks_count; + struct wmi_network_type a_networks[WMI_PNO_MAX_SUPP_NETWORKS]; + u32 fast_scan_period; + u32 slow_scan_period; + u8 fast_scan_max_cycles; + + bool do_passive_scan; + + u32 delay_start_time; + u32 active_min_time; + u32 active_max_time; + u32 passive_min_time; + u32 passive_max_time; + + /* mac address randomization attributes */ + u32 enable_pno_scan_randomization; + u8 mac_addr[ETH_ALEN]; + u8 mac_addr_mask[ETH_ALEN]; +} __packed; + +enum wmi_host_platform_type { + WMI_HOST_PLATFORM_HIGH_PERF, + WMI_HOST_PLATFORM_LOW_PERF, +}; + +enum wmi_bss_survey_req_type { + WMI_BSS_SURVEY_REQ_TYPE_READ = 1, + WMI_BSS_SURVEY_REQ_TYPE_READ_CLEAR, +}; + +struct wmi_pdev_chan_info_req_cmd { + __le32 type; + __le32 reserved; +} __packed; + +/* bb timing register configurations */ +struct wmi_bb_timing_cfg_arg { + /* Tx_end to pa off timing */ + u32 bb_tx_timing; + + /* Tx_end to external pa off timing */ + u32 bb_xpa_timing; +}; + +struct wmi_pdev_bb_timing_cfg_cmd { + /* Tx_end to pa off timing */ + __le32 bb_tx_timing; + + /* Tx_end to external pa off timing */ + __le32 bb_xpa_timing; +} __packed; + +struct ath10k; +struct ath10k_vif; +struct ath10k_fw_stats_pdev; +struct ath10k_fw_stats_peer; +struct ath10k_fw_stats; + +int ath10k_wmi_attach(struct ath10k *ar); +void ath10k_wmi_detach(struct ath10k *ar); +void ath10k_wmi_free_host_mem(struct ath10k *ar); +int ath10k_wmi_wait_for_service_ready(struct ath10k *ar); +int ath10k_wmi_wait_for_unified_ready(struct ath10k *ar); + +struct sk_buff *ath10k_wmi_alloc_skb(struct ath10k *ar, u32 len); +int ath10k_wmi_connect(struct ath10k *ar); + +struct sk_buff *ath10k_wmi_alloc_skb(struct ath10k *ar, u32 len); +int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id); +int ath10k_wmi_cmd_send_nowait(struct ath10k *ar, struct sk_buff *skb, + u32 cmd_id); +void ath10k_wmi_start_scan_init(struct ath10k *ar, struct wmi_start_scan_arg *arg); + +void ath10k_wmi_pull_pdev_stats_base(const struct wmi_pdev_stats_base *src, + struct ath10k_fw_stats_pdev *dst); +void ath10k_wmi_pull_pdev_stats_tx(const struct wmi_pdev_stats_tx *src, + struct ath10k_fw_stats_pdev *dst); +void ath10k_wmi_pull_pdev_stats_rx(const struct wmi_pdev_stats_rx *src, + struct ath10k_fw_stats_pdev *dst); +void ath10k_wmi_pull_pdev_stats_extra(const struct wmi_pdev_stats_extra *src, + struct ath10k_fw_stats_pdev *dst); +void ath10k_wmi_pull_peer_stats(const struct wmi_peer_stats *src, + struct ath10k_fw_stats_peer *dst); +void ath10k_wmi_put_host_mem_chunks(struct ath10k *ar, + struct wmi_host_mem_chunks *chunks); +void ath10k_wmi_put_start_scan_common(struct wmi_start_scan_common *cmn, + const struct wmi_start_scan_arg *arg); +void ath10k_wmi_set_wmm_param(struct wmi_wmm_params *params, + const struct wmi_wmm_params_arg *arg); +void ath10k_wmi_put_wmi_channel(struct ath10k *ar, struct wmi_channel *ch, + const struct wmi_channel_arg *arg); +int ath10k_wmi_start_scan_verify(const struct wmi_start_scan_arg *arg); + +int ath10k_wmi_event_scan(struct ath10k *ar, struct sk_buff *skb); +int ath10k_wmi_event_mgmt_rx(struct ath10k *ar, struct sk_buff *skb); +int ath10k_wmi_event_mgmt_tx_compl(struct ath10k *ar, struct sk_buff *skb); +int ath10k_wmi_event_mgmt_tx_bundle_compl(struct ath10k *ar, struct sk_buff *skb); +void ath10k_wmi_event_chan_info(struct ath10k *ar, struct sk_buff *skb); +void ath10k_wmi_event_echo(struct ath10k *ar, struct sk_buff *skb); +int ath10k_wmi_event_debug_mesg(struct ath10k *ar, struct sk_buff *skb); +void ath10k_wmi_event_update_stats(struct ath10k *ar, struct sk_buff *skb); +void ath10k_wmi_event_vdev_start_resp(struct ath10k *ar, struct sk_buff *skb); +void ath10k_wmi_event_vdev_stopped(struct ath10k *ar, struct sk_buff *skb); +void ath10k_wmi_event_peer_sta_kickout(struct ath10k *ar, struct sk_buff *skb); +void ath10k_wmi_event_host_swba(struct ath10k *ar, struct sk_buff *skb); +void ath10k_wmi_event_tbttoffset_update(struct ath10k *ar, struct sk_buff *skb); +void ath10k_wmi_event_dfs(struct ath10k *ar, + struct wmi_phyerr_ev_arg *phyerr, u64 tsf); +void ath10k_wmi_event_spectral_scan(struct ath10k *ar, + struct wmi_phyerr_ev_arg *phyerr, + u64 tsf); +void ath10k_wmi_event_phyerr(struct ath10k *ar, struct sk_buff *skb); +void ath10k_wmi_event_roam(struct ath10k *ar, struct sk_buff *skb); +void ath10k_wmi_event_profile_match(struct ath10k *ar, struct sk_buff *skb); +void ath10k_wmi_event_debug_print(struct ath10k *ar, struct sk_buff *skb); +void ath10k_wmi_event_pdev_qvit(struct ath10k *ar, struct sk_buff *skb); +void ath10k_wmi_event_wlan_profile_data(struct ath10k *ar, struct sk_buff *skb); +void ath10k_wmi_event_rtt_measurement_report(struct ath10k *ar, + struct sk_buff *skb); +void ath10k_wmi_event_tsf_measurement_report(struct ath10k *ar, + struct sk_buff *skb); +void ath10k_wmi_event_rtt_error_report(struct ath10k *ar, struct sk_buff *skb); +void ath10k_wmi_event_wow_wakeup_host(struct ath10k *ar, struct sk_buff *skb); +void ath10k_wmi_event_dcs_interference(struct ath10k *ar, struct sk_buff *skb); +void ath10k_wmi_event_pdev_tpc_config(struct ath10k *ar, struct sk_buff *skb); +void ath10k_wmi_event_pdev_ftm_intg(struct ath10k *ar, struct sk_buff *skb); +void ath10k_wmi_event_gtk_offload_status(struct ath10k *ar, + struct sk_buff *skb); +void ath10k_wmi_event_gtk_rekey_fail(struct ath10k *ar, struct sk_buff *skb); +void ath10k_wmi_event_delba_complete(struct ath10k *ar, struct sk_buff *skb); +void ath10k_wmi_event_addba_complete(struct ath10k *ar, struct sk_buff *skb); +void ath10k_wmi_event_vdev_install_key_complete(struct ath10k *ar, + struct sk_buff *skb); +void ath10k_wmi_event_inst_rssi_stats(struct ath10k *ar, struct sk_buff *skb); +void ath10k_wmi_event_vdev_standby_req(struct ath10k *ar, struct sk_buff *skb); +void ath10k_wmi_event_vdev_resume_req(struct ath10k *ar, struct sk_buff *skb); +void ath10k_wmi_event_service_ready(struct ath10k *ar, struct sk_buff *skb); +int ath10k_wmi_event_ready(struct ath10k *ar, struct sk_buff *skb); +void ath10k_wmi_event_service_available(struct ath10k *ar, struct sk_buff *skb); +int ath10k_wmi_op_pull_phyerr_ev(struct ath10k *ar, const void *phyerr_buf, + int left_len, struct wmi_phyerr_ev_arg *arg); +void ath10k_wmi_main_op_fw_stats_fill(struct ath10k *ar, + struct ath10k_fw_stats *fw_stats, + char *buf); +void ath10k_wmi_10x_op_fw_stats_fill(struct ath10k *ar, + struct ath10k_fw_stats *fw_stats, + char *buf); +size_t ath10k_wmi_fw_stats_num_peers(struct list_head *head); +size_t ath10k_wmi_fw_stats_num_vdevs(struct list_head *head); +void ath10k_wmi_10_4_op_fw_stats_fill(struct ath10k *ar, + struct ath10k_fw_stats *fw_stats, + char *buf); +int ath10k_wmi_op_get_vdev_subtype(struct ath10k *ar, + enum wmi_vdev_subtype subtype); +int ath10k_wmi_barrier(struct ath10k *ar); +void ath10k_wmi_tpc_config_get_rate_code(u8 *rate_code, u16 *pream_table, + u32 num_tx_chain); +void ath10k_wmi_event_tpc_final_table(struct ath10k *ar, struct sk_buff *skb); + +#endif /* _WMI_H_ */ |