Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1799 insertions, 0 deletions

diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c
new file mode 100644
index 000000000..58d3e86f6
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/eeprom.c
@@ -0,0 +1,1799 @@
+/*
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2009 Nick Kossifidis <mickflemm@gmail.com>
+ * Copyright (c) 2008-2009 Felix Fietkau <nbd@openwrt.org>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+/*************************************\
+* EEPROM access functions and helpers *
+\*************************************/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/slab.h>
+
+#include "ath5k.h"
+#include "reg.h"
+#include "debug.h"
+
+
+/******************\
+* Helper functions *
+\******************/
+
+/*
+ * Translate binary channel representation in EEPROM to frequency
+ */
+static u16 ath5k_eeprom_bin2freq(struct ath5k_eeprom_info *ee, u16 bin,
+							unsigned int mode)
+{
+	u16 val;
+
+	if (bin == AR5K_EEPROM_CHANNEL_DIS)
+		return bin;
+
+	if (mode == AR5K_EEPROM_MODE_11A) {
+		if (ee->ee_version > AR5K_EEPROM_VERSION_3_2)
+			val = (5 * bin) + 4800;
+		else
+			val = bin > 62 ? (10 * 62) + (5 * (bin - 62)) + 5100 :
+				(bin * 10) + 5100;
+	} else {
+		if (ee->ee_version > AR5K_EEPROM_VERSION_3_2)
+			val = bin + 2300;
+		else
+			val = bin + 2400;
+	}
+
+	return val;
+}
+
+
+/*********\
+* Parsers *
+\*********/
+
+/*
+ * Initialize eeprom & capabilities structs
+ */
+static int
+ath5k_eeprom_init_header(struct ath5k_hw *ah)
+{
+	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+	u16 val;
+	u32 cksum, offset, eep_max = AR5K_EEPROM_INFO_MAX;
+
+	/*
+	 * Read values from EEPROM and store them in the capability structure
+	 */
+	AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MAGIC, ee_magic);
+	AR5K_EEPROM_READ_HDR(AR5K_EEPROM_PROTECT, ee_protect);
+	AR5K_EEPROM_READ_HDR(AR5K_EEPROM_REG_DOMAIN, ee_regdomain);
+	AR5K_EEPROM_READ_HDR(AR5K_EEPROM_VERSION, ee_version);
+	AR5K_EEPROM_READ_HDR(AR5K_EEPROM_HDR, ee_header);
+
+	/* Return if we have an old EEPROM */
+	if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_0)
+		return 0;
+
+	/*
+	 * Validate the checksum of the EEPROM date. There are some
+	 * devices with invalid EEPROMs.
+	 */
+	AR5K_EEPROM_READ(AR5K_EEPROM_SIZE_UPPER, val);
+	if (val) {
+		eep_max = (val & AR5K_EEPROM_SIZE_UPPER_MASK) <<
+			   AR5K_EEPROM_SIZE_ENDLOC_SHIFT;
+		AR5K_EEPROM_READ(AR5K_EEPROM_SIZE_LOWER, val);
+		eep_max = (eep_max | val) - AR5K_EEPROM_INFO_BASE;
+
+		/*
+		 * Fail safe check to prevent stupid loops due
+		 * to busted EEPROMs. XXX: This value is likely too
+		 * big still, waiting on a better value.
+		 */
+		if (eep_max > (3 * AR5K_EEPROM_INFO_MAX)) {
+			ATH5K_ERR(ah, "Invalid max custom EEPROM size: "
+				  "%d (0x%04x) max expected: %d (0x%04x)\n",
+				  eep_max, eep_max,
+				  3 * AR5K_EEPROM_INFO_MAX,
+				  3 * AR5K_EEPROM_INFO_MAX);
+			return -EIO;
+		}
+	}
+
+	for (cksum = 0, offset = 0; offset < eep_max; offset++) {
+		AR5K_EEPROM_READ(AR5K_EEPROM_INFO(offset), val);
+		cksum ^= val;
+	}
+	if (cksum != AR5K_EEPROM_INFO_CKSUM) {
+		ATH5K_ERR(ah, "Invalid EEPROM "
+			  "checksum: 0x%04x eep_max: 0x%04x (%s)\n",
+			  cksum, eep_max,
+			  eep_max == AR5K_EEPROM_INFO_MAX ?
+				"default size" : "custom size");
+		return -EIO;
+	}
+
+	AR5K_EEPROM_READ_HDR(AR5K_EEPROM_ANT_GAIN(ah->ah_ee_version),
+	    ee_ant_gain);
+
+	if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) {
+		AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC0, ee_misc0);
+		AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC1, ee_misc1);
+
+		/* XXX: Don't know which versions include these two */
+		AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC2, ee_misc2);
+
+		if (ee->ee_version >= AR5K_EEPROM_VERSION_4_3)
+			AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC3, ee_misc3);
+
+		if (ee->ee_version >= AR5K_EEPROM_VERSION_5_0) {
+			AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC4, ee_misc4);
+			AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC5, ee_misc5);
+			AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC6, ee_misc6);
+		}
+	}
+
+	if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_3) {
+		AR5K_EEPROM_READ(AR5K_EEPROM_OBDB0_2GHZ, val);
+		ee->ee_ob[AR5K_EEPROM_MODE_11B][0] = val & 0x7;
+		ee->ee_db[AR5K_EEPROM_MODE_11B][0] = (val >> 3) & 0x7;
+
+		AR5K_EEPROM_READ(AR5K_EEPROM_OBDB1_2GHZ, val);
+		ee->ee_ob[AR5K_EEPROM_MODE_11G][0] = val & 0x7;
+		ee->ee_db[AR5K_EEPROM_MODE_11G][0] = (val >> 3) & 0x7;
+	}
+
+	AR5K_EEPROM_READ(AR5K_EEPROM_IS_HB63, val);
+
+	if ((ah->ah_mac_version == (AR5K_SREV_AR2425 >> 4)) && val)
+		ee->ee_is_hb63 = true;
+	else
+		ee->ee_is_hb63 = false;
+
+	AR5K_EEPROM_READ(AR5K_EEPROM_RFKILL, val);
+	ee->ee_rfkill_pin = (u8) AR5K_REG_MS(val, AR5K_EEPROM_RFKILL_GPIO_SEL);
+	ee->ee_rfkill_pol = val & AR5K_EEPROM_RFKILL_POLARITY ? true : false;
+
+	/* Check if PCIE_OFFSET points to PCIE_SERDES_SECTION
+	 * and enable serdes programming if needed.
+	 *
+	 * XXX: Serdes values seem to be fixed so
+	 * no need to read them here, we write them
+	 * during ath5k_hw_init */
+	AR5K_EEPROM_READ(AR5K_EEPROM_PCIE_OFFSET, val);
+	ee->ee_serdes = (val == AR5K_EEPROM_PCIE_SERDES_SECTION) ?
+							true : false;
+
+	return 0;
+}
+
+
+/*
+ * Read antenna infos from eeprom
+ */
+static int ath5k_eeprom_read_ants(struct ath5k_hw *ah, u32 *offset,
+		unsigned int mode)
+{
+	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+	u32 o = *offset;
+	u16 val;
+	int i = 0;
+
+	AR5K_EEPROM_READ(o++, val);
+	ee->ee_switch_settling[mode]	= (val >> 8) & 0x7f;
+	ee->ee_atn_tx_rx[mode]		= (val >> 2) & 0x3f;
+	ee->ee_ant_control[mode][i]	= (val << 4) & 0x3f;
+
+	AR5K_EEPROM_READ(o++, val);
+	ee->ee_ant_control[mode][i++]	|= (val >> 12) & 0xf;
+	ee->ee_ant_control[mode][i++]	= (val >> 6) & 0x3f;
+	ee->ee_ant_control[mode][i++]	= val & 0x3f;
+
+	AR5K_EEPROM_READ(o++, val);
+	ee->ee_ant_control[mode][i++]	= (val >> 10) & 0x3f;
+	ee->ee_ant_control[mode][i++]	= (val >> 4) & 0x3f;
+	ee->ee_ant_control[mode][i]	= (val << 2) & 0x3f;
+
+	AR5K_EEPROM_READ(o++, val);
+	ee->ee_ant_control[mode][i++]	|= (val >> 14) & 0x3;
+	ee->ee_ant_control[mode][i++]	= (val >> 8) & 0x3f;
+	ee->ee_ant_control[mode][i++]	= (val >> 2) & 0x3f;
+	ee->ee_ant_control[mode][i]	= (val << 4) & 0x3f;
+
+	AR5K_EEPROM_READ(o++, val);
+	ee->ee_ant_control[mode][i++]	|= (val >> 12) & 0xf;
+	ee->ee_ant_control[mode][i++]	= (val >> 6) & 0x3f;
+	ee->ee_ant_control[mode][i++]	= val & 0x3f;
+
+	/* Get antenna switch tables */
+	ah->ah_ant_ctl[mode][AR5K_ANT_CTL] =
+	    (ee->ee_ant_control[mode][0] << 4);
+	ah->ah_ant_ctl[mode][AR5K_ANT_SWTABLE_A] =
+	     ee->ee_ant_control[mode][1]	|
+	    (ee->ee_ant_control[mode][2] << 6)	|
+	    (ee->ee_ant_control[mode][3] << 12) |
+	    (ee->ee_ant_control[mode][4] << 18) |
+	    (ee->ee_ant_control[mode][5] << 24);
+	ah->ah_ant_ctl[mode][AR5K_ANT_SWTABLE_B] =
+	     ee->ee_ant_control[mode][6]	|
+	    (ee->ee_ant_control[mode][7] << 6)	|
+	    (ee->ee_ant_control[mode][8] << 12) |
+	    (ee->ee_ant_control[mode][9] << 18) |
+	    (ee->ee_ant_control[mode][10] << 24);
+
+	/* return new offset */
+	*offset = o;
+
+	return 0;
+}
+
+/*
+ * Read supported modes and some mode-specific calibration data
+ * from eeprom
+ */
+static int ath5k_eeprom_read_modes(struct ath5k_hw *ah, u32 *offset,
+		unsigned int mode)
+{
+	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+	u32 o = *offset;
+	u16 val;
+
+	ee->ee_n_piers[mode] = 0;
+	AR5K_EEPROM_READ(o++, val);
+	ee->ee_adc_desired_size[mode]	= (s8)((val >> 8) & 0xff);
+	switch (mode) {
+	case AR5K_EEPROM_MODE_11A:
+		ee->ee_ob[mode][3]	= (val >> 5) & 0x7;
+		ee->ee_db[mode][3]	= (val >> 2) & 0x7;
+		ee->ee_ob[mode][2]	= (val << 1) & 0x7;
+
+		AR5K_EEPROM_READ(o++, val);
+		ee->ee_ob[mode][2]	|= (val >> 15) & 0x1;
+		ee->ee_db[mode][2]	= (val >> 12) & 0x7;
+		ee->ee_ob[mode][1]	= (val >> 9) & 0x7;
+		ee->ee_db[mode][1]	= (val >> 6) & 0x7;
+		ee->ee_ob[mode][0]	= (val >> 3) & 0x7;
+		ee->ee_db[mode][0]	= val & 0x7;
+		break;
+	case AR5K_EEPROM_MODE_11G:
+	case AR5K_EEPROM_MODE_11B:
+		ee->ee_ob[mode][1]	= (val >> 4) & 0x7;
+		ee->ee_db[mode][1]	= val & 0x7;
+		break;
+	}
+
+	AR5K_EEPROM_READ(o++, val);
+	ee->ee_tx_end2xlna_enable[mode]	= (val >> 8) & 0xff;
+	ee->ee_thr_62[mode]		= val & 0xff;
+
+	if (ah->ah_ee_version <= AR5K_EEPROM_VERSION_3_2)
+		ee->ee_thr_62[mode] = mode == AR5K_EEPROM_MODE_11A ? 15 : 28;
+
+	AR5K_EEPROM_READ(o++, val);
+	ee->ee_tx_end2xpa_disable[mode]	= (val >> 8) & 0xff;
+	ee->ee_tx_frm2xpa_enable[mode]	= val & 0xff;
+
+	AR5K_EEPROM_READ(o++, val);
+	ee->ee_pga_desired_size[mode]	= (val >> 8) & 0xff;
+
+	if ((val & 0xff) & 0x80)
+		ee->ee_noise_floor_thr[mode] = -((((val & 0xff) ^ 0xff)) + 1);
+	else
+		ee->ee_noise_floor_thr[mode] = val & 0xff;
+
+	if (ah->ah_ee_version <= AR5K_EEPROM_VERSION_3_2)
+		ee->ee_noise_floor_thr[mode] =
+		    mode == AR5K_EEPROM_MODE_11A ? -54 : -1;
+
+	AR5K_EEPROM_READ(o++, val);
+	ee->ee_xlna_gain[mode]		= (val >> 5) & 0xff;
+	ee->ee_x_gain[mode]		= (val >> 1) & 0xf;
+	ee->ee_xpd[mode]		= val & 0x1;
+
+	if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0 &&
+	    mode != AR5K_EEPROM_MODE_11B)
+		ee->ee_fixed_bias[mode] = (val >> 13) & 0x1;
+
+	if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_3_3) {
+		AR5K_EEPROM_READ(o++, val);
+		ee->ee_false_detect[mode] = (val >> 6) & 0x7f;
+
+		if (mode == AR5K_EEPROM_MODE_11A)
+			ee->ee_xr_power[mode] = val & 0x3f;
+		else {
+			/* b_DB_11[bg] and b_OB_11[bg] */
+			ee->ee_ob[mode][0] = val & 0x7;
+			ee->ee_db[mode][0] = (val >> 3) & 0x7;
+		}
+	}
+
+	if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_4) {
+		ee->ee_i_gain[mode] = AR5K_EEPROM_I_GAIN;
+		ee->ee_cck_ofdm_power_delta = AR5K_EEPROM_CCK_OFDM_DELTA;
+	} else {
+		ee->ee_i_gain[mode] = (val >> 13) & 0x7;
+
+		AR5K_EEPROM_READ(o++, val);
+		ee->ee_i_gain[mode] |= (val << 3) & 0x38;
+
+		if (mode == AR5K_EEPROM_MODE_11G) {
+			ee->ee_cck_ofdm_power_delta = (val >> 3) & 0xff;
+			if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_6)
+				ee->ee_scaled_cck_delta = (val >> 11) & 0x1f;
+		}
+	}
+
+	if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0 &&
+			mode == AR5K_EEPROM_MODE_11A) {
+		ee->ee_i_cal[mode] = (val >> 8) & 0x3f;
+		ee->ee_q_cal[mode] = (val >> 3) & 0x1f;
+	}
+
+	if (ah->ah_ee_version < AR5K_EEPROM_VERSION_4_0)
+		goto done;
+
+	/* Note: >= v5 have bg freq piers on another location
+	 * so these freq piers are ignored for >= v5 (should be 0xff
+	 * anyway) */
+	switch (mode) {
+	case AR5K_EEPROM_MODE_11A:
+		if (ah->ah_ee_version < AR5K_EEPROM_VERSION_4_1)
+			break;
+
+		AR5K_EEPROM_READ(o++, val);
+		ee->ee_margin_tx_rx[mode] = val & 0x3f;
+		break;
+	case AR5K_EEPROM_MODE_11B:
+		AR5K_EEPROM_READ(o++, val);
+
+		ee->ee_pwr_cal_b[0].freq =
+			ath5k_eeprom_bin2freq(ee, val & 0xff, mode);
+		if (ee->ee_pwr_cal_b[0].freq != AR5K_EEPROM_CHANNEL_DIS)
+			ee->ee_n_piers[mode]++;
+
+		ee->ee_pwr_cal_b[1].freq =
+			ath5k_eeprom_bin2freq(ee, (val >> 8) & 0xff, mode);
+		if (ee->ee_pwr_cal_b[1].freq != AR5K_EEPROM_CHANNEL_DIS)
+			ee->ee_n_piers[mode]++;
+
+		AR5K_EEPROM_READ(o++, val);
+		ee->ee_pwr_cal_b[2].freq =
+			ath5k_eeprom_bin2freq(ee, val & 0xff, mode);
+		if (ee->ee_pwr_cal_b[2].freq != AR5K_EEPROM_CHANNEL_DIS)
+			ee->ee_n_piers[mode]++;
+
+		if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1)
+			ee->ee_margin_tx_rx[mode] = (val >> 8) & 0x3f;
+		break;
+	case AR5K_EEPROM_MODE_11G:
+		AR5K_EEPROM_READ(o++, val);
+
+		ee->ee_pwr_cal_g[0].freq =
+			ath5k_eeprom_bin2freq(ee, val & 0xff, mode);
+		if (ee->ee_pwr_cal_g[0].freq != AR5K_EEPROM_CHANNEL_DIS)
+			ee->ee_n_piers[mode]++;
+
+		ee->ee_pwr_cal_g[1].freq =
+			ath5k_eeprom_bin2freq(ee, (val >> 8) & 0xff, mode);
+		if (ee->ee_pwr_cal_g[1].freq != AR5K_EEPROM_CHANNEL_DIS)
+			ee->ee_n_piers[mode]++;
+
+		AR5K_EEPROM_READ(o++, val);
+		ee->ee_turbo_max_power[mode] = val & 0x7f;
+		ee->ee_xr_power[mode] = (val >> 7) & 0x3f;
+
+		AR5K_EEPROM_READ(o++, val);
+		ee->ee_pwr_cal_g[2].freq =
+			ath5k_eeprom_bin2freq(ee, val & 0xff, mode);
+		if (ee->ee_pwr_cal_g[2].freq != AR5K_EEPROM_CHANNEL_DIS)
+			ee->ee_n_piers[mode]++;
+
+		if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1)
+			ee->ee_margin_tx_rx[mode] = (val >> 8) & 0x3f;
+
+		AR5K_EEPROM_READ(o++, val);
+		ee->ee_i_cal[mode] = (val >> 5) & 0x3f;
+		ee->ee_q_cal[mode] = val & 0x1f;
+
+		if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_2) {
+			AR5K_EEPROM_READ(o++, val);
+			ee->ee_cck_ofdm_gain_delta = val & 0xff;
+		}
+		break;
+	}
+
+	/*
+	 * Read turbo mode information on newer EEPROM versions
+	 */
+	if (ee->ee_version < AR5K_EEPROM_VERSION_5_0)
+		goto done;
+
+	switch (mode) {
+	case AR5K_EEPROM_MODE_11A:
+		ee->ee_switch_settling_turbo[mode] = (val >> 6) & 0x7f;
+
+		ee->ee_atn_tx_rx_turbo[mode] = (val >> 13) & 0x7;
+		AR5K_EEPROM_READ(o++, val);
+		ee->ee_atn_tx_rx_turbo[mode] |= (val & 0x7) << 3;
+		ee->ee_margin_tx_rx_turbo[mode] = (val >> 3) & 0x3f;
+
+		ee->ee_adc_desired_size_turbo[mode] = (val >> 9) & 0x7f;
+		AR5K_EEPROM_READ(o++, val);
+		ee->ee_adc_desired_size_turbo[mode] |= (val & 0x1) << 7;
+		ee->ee_pga_desired_size_turbo[mode] = (val >> 1) & 0xff;
+
+		if (AR5K_EEPROM_EEMAP(ee->ee_misc0) >= 2)
+			ee->ee_pd_gain_overlap = (val >> 9) & 0xf;
+		break;
+	case AR5K_EEPROM_MODE_11G:
+		ee->ee_switch_settling_turbo[mode] = (val >> 8) & 0x7f;
+
+		ee->ee_atn_tx_rx_turbo[mode] = (val >> 15) & 0x7;
+		AR5K_EEPROM_READ(o++, val);
+		ee->ee_atn_tx_rx_turbo[mode] |= (val & 0x1f) << 1;
+		ee->ee_margin_tx_rx_turbo[mode] = (val >> 5) & 0x3f;
+
+		ee->ee_adc_desired_size_turbo[mode] = (val >> 11) & 0x7f;
+		AR5K_EEPROM_READ(o++, val);
+		ee->ee_adc_desired_size_turbo[mode] |= (val & 0x7) << 5;
+		ee->ee_pga_desired_size_turbo[mode] = (val >> 3) & 0xff;
+		break;
+	}
+
+done:
+	/* return new offset */
+	*offset = o;
+
+	return 0;
+}
+
+/* Read mode-specific data (except power calibration data) */
+static int
+ath5k_eeprom_init_modes(struct ath5k_hw *ah)
+{
+	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+	u32 mode_offset[3];
+	unsigned int mode;
+	u32 offset;
+	int ret;
+
+	/*
+	 * Get values for all modes
+	 */
+	mode_offset[AR5K_EEPROM_MODE_11A] = AR5K_EEPROM_MODES_11A(ah->ah_ee_version);
+	mode_offset[AR5K_EEPROM_MODE_11B] = AR5K_EEPROM_MODES_11B(ah->ah_ee_version);
+	mode_offset[AR5K_EEPROM_MODE_11G] = AR5K_EEPROM_MODES_11G(ah->ah_ee_version);
+
+	ee->ee_turbo_max_power[AR5K_EEPROM_MODE_11A] =
+		AR5K_EEPROM_HDR_T_5GHZ_DBM(ee->ee_header);
+
+	for (mode = AR5K_EEPROM_MODE_11A; mode <= AR5K_EEPROM_MODE_11G; mode++) {
+		offset = mode_offset[mode];
+
+		ret = ath5k_eeprom_read_ants(ah, &offset, mode);
+		if (ret)
+			return ret;
+
+		ret = ath5k_eeprom_read_modes(ah, &offset, mode);
+		if (ret)
+			return ret;
+	}
+
+	/* override for older eeprom versions for better performance */
+	if (ah->ah_ee_version <= AR5K_EEPROM_VERSION_3_2) {
+		ee->ee_thr_62[AR5K_EEPROM_MODE_11A] = 15;
+		ee->ee_thr_62[AR5K_EEPROM_MODE_11B] = 28;
+		ee->ee_thr_62[AR5K_EEPROM_MODE_11G] = 28;
+	}
+
+	return 0;
+}
+
+/* Read the frequency piers for each mode (mostly used on newer eeproms with 0xff
+ * frequency mask) */
+static inline int
+ath5k_eeprom_read_freq_list(struct ath5k_hw *ah, int *offset, int max,
+			struct ath5k_chan_pcal_info *pc, unsigned int mode)
+{
+	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+	int o = *offset;
+	int i = 0;
+	u8 freq1, freq2;
+	u16 val;
+
+	ee->ee_n_piers[mode] = 0;
+	while (i < max) {
+		AR5K_EEPROM_READ(o++, val);
+
+		freq1 = val & 0xff;
+		if (!freq1)
+			break;
+
+		pc[i++].freq = ath5k_eeprom_bin2freq(ee,
+				freq1, mode);
+		ee->ee_n_piers[mode]++;
+
+		freq2 = (val >> 8) & 0xff;
+		if (!freq2 || i >= max)
+			break;
+
+		pc[i++].freq = ath5k_eeprom_bin2freq(ee,
+				freq2, mode);
+		ee->ee_n_piers[mode]++;
+	}
+
+	/* return new offset */
+	*offset = o;
+
+	return 0;
+}
+
+/* Read frequency piers for 802.11a */
+static int
+ath5k_eeprom_init_11a_pcal_freq(struct ath5k_hw *ah, int offset)
+{
+	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+	struct ath5k_chan_pcal_info *pcal = ee->ee_pwr_cal_a;
+	int i;
+	u16 val;
+	u8 mask;
+
+	if (ee->ee_version >= AR5K_EEPROM_VERSION_3_3) {
+		ath5k_eeprom_read_freq_list(ah, &offset,
+			AR5K_EEPROM_N_5GHZ_CHAN, pcal,
+			AR5K_EEPROM_MODE_11A);
+	} else {
+		mask = AR5K_EEPROM_FREQ_M(ah->ah_ee_version);
+
+		AR5K_EEPROM_READ(offset++, val);
+		pcal[0].freq  = (val >> 9) & mask;
+		pcal[1].freq  = (val >> 2) & mask;
+		pcal[2].freq  = (val << 5) & mask;
+
+		AR5K_EEPROM_READ(offset++, val);
+		pcal[2].freq |= (val >> 11) & 0x1f;
+		pcal[3].freq  = (val >> 4) & mask;
+		pcal[4].freq  = (val << 3) & mask;
+
+		AR5K_EEPROM_READ(offset++, val);
+		pcal[4].freq |= (val >> 13) & 0x7;
+		pcal[5].freq  = (val >> 6) & mask;
+		pcal[6].freq  = (val << 1) & mask;
+
+		AR5K_EEPROM_READ(offset++, val);
+		pcal[6].freq |= (val >> 15) & 0x1;
+		pcal[7].freq  = (val >> 8) & mask;
+		pcal[8].freq  = (val >> 1) & mask;
+		pcal[9].freq  = (val << 6) & mask;
+
+		AR5K_EEPROM_READ(offset++, val);
+		pcal[9].freq |= (val >> 10) & 0x3f;
+
+		/* Fixed number of piers */
+		ee->ee_n_piers[AR5K_EEPROM_MODE_11A] = 10;
+
+		for (i = 0; i < AR5K_EEPROM_N_5GHZ_CHAN; i++) {
+			pcal[i].freq = ath5k_eeprom_bin2freq(ee,
+				pcal[i].freq, AR5K_EEPROM_MODE_11A);
+		}
+	}
+
+	return 0;
+}
+
+/* Read frequency piers for 802.11bg on eeprom versions >= 5 and eemap >= 2 */
+static inline int
+ath5k_eeprom_init_11bg_2413(struct ath5k_hw *ah, unsigned int mode, int offset)
+{
+	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+	struct ath5k_chan_pcal_info *pcal;
+
+	switch (mode) {
+	case AR5K_EEPROM_MODE_11B:
+		pcal = ee->ee_pwr_cal_b;
+		break;
+	case AR5K_EEPROM_MODE_11G:
+		pcal = ee->ee_pwr_cal_g;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	ath5k_eeprom_read_freq_list(ah, &offset,
+		AR5K_EEPROM_N_2GHZ_CHAN_2413, pcal,
+		mode);
+
+	return 0;
+}
+
+
+/*
+ * Read power calibration for RF5111 chips
+ *
+ * For RF5111 we have an XPD -eXternal Power Detector- curve
+ * for each calibrated channel. Each curve has 0,5dB Power steps
+ * on x axis and PCDAC steps (offsets) on y axis and looks like an
+ * exponential function. To recreate the curve we read 11 points
+ * here and interpolate later.
+ */
+
+/* Used to match PCDAC steps with power values on RF5111 chips
+ * (eeprom versions < 4). For RF5111 we have 11 pre-defined PCDAC
+ * steps that match with the power values we read from eeprom. On
+ * older eeprom versions (< 3.2) these steps are equally spaced at
+ * 10% of the pcdac curve -until the curve reaches its maximum-
+ * (11 steps from 0 to 100%) but on newer eeprom versions (>= 3.2)
+ * these 11 steps are spaced in a different way. This function returns
+ * the pcdac steps based on eeprom version and curve min/max so that we
+ * can have pcdac/pwr points.
+ */
+static inline void
+ath5k_get_pcdac_intercepts(struct ath5k_hw *ah, u8 min, u8 max, u8 *vp)
+{
+	static const u16 intercepts3[] = {
+		0, 5, 10, 20, 30, 50, 70, 85, 90, 95, 100
+	};
+	static const u16 intercepts3_2[] = {
+		0, 10, 20, 30, 40, 50, 60, 70, 80, 90, 100
+	};
+	const u16 *ip;
+	int i;
+
+	if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_3_2)
+		ip = intercepts3_2;
+	else
+		ip = intercepts3;
+
+	for (i = 0; i < ARRAY_SIZE(intercepts3); i++)
+		vp[i] = (ip[i] * max + (100 - ip[i]) * min) / 100;
+}
+
+static int
+ath5k_eeprom_free_pcal_info(struct ath5k_hw *ah, int mode)
+{
+	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+	struct ath5k_chan_pcal_info *chinfo;
+	u8 pier, pdg;
+
+	switch (mode) {
+	case AR5K_EEPROM_MODE_11A:
+		if (!AR5K_EEPROM_HDR_11A(ee->ee_header))
+			return 0;
+		chinfo = ee->ee_pwr_cal_a;
+		break;
+	case AR5K_EEPROM_MODE_11B:
+		if (!AR5K_EEPROM_HDR_11B(ee->ee_header))
+			return 0;
+		chinfo = ee->ee_pwr_cal_b;
+		break;
+	case AR5K_EEPROM_MODE_11G:
+		if (!AR5K_EEPROM_HDR_11G(ee->ee_header))
+			return 0;
+		chinfo = ee->ee_pwr_cal_g;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	for (pier = 0; pier < ee->ee_n_piers[mode]; pier++) {
+		if (!chinfo[pier].pd_curves)
+			continue;
+
+		for (pdg = 0; pdg < AR5K_EEPROM_N_PD_CURVES; pdg++) {
+			struct ath5k_pdgain_info *pd =
+					&chinfo[pier].pd_curves[pdg];
+
+			kfree(pd->pd_step);
+			kfree(pd->pd_pwr);
+		}
+
+		kfree(chinfo[pier].pd_curves);
+	}
+
+	return 0;
+}
+
+/* Convert RF5111 specific data to generic raw data
+ * used by interpolation code */
+static int
+ath5k_eeprom_convert_pcal_info_5111(struct ath5k_hw *ah, int mode,
+				struct ath5k_chan_pcal_info *chinfo)
+{
+	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+	struct ath5k_chan_pcal_info_rf5111 *pcinfo;
+	struct ath5k_pdgain_info *pd;
+	u8 pier, point, idx;
+	u8 *pdgain_idx = ee->ee_pdc_to_idx[mode];
+
+	/* Fill raw data for each calibration pier */
+	for (pier = 0; pier < ee->ee_n_piers[mode]; pier++) {
+
+		pcinfo = &chinfo[pier].rf5111_info;
+
+		/* Allocate pd_curves for this cal pier */
+		chinfo[pier].pd_curves =
+			kcalloc(AR5K_EEPROM_N_PD_CURVES,
+				sizeof(struct ath5k_pdgain_info),
+				GFP_KERNEL);
+
+		if (!chinfo[pier].pd_curves)
+			goto err_out;
+
+		/* Only one curve for RF5111
+		 * find out which one and place
+		 * in pd_curves.
+		 * Note: ee_x_gain is reversed here */
+		for (idx = 0; idx < AR5K_EEPROM_N_PD_CURVES; idx++) {
+
+			if (!((ee->ee_x_gain[mode] >> idx) & 0x1)) {
+				pdgain_idx[0] = idx;
+				break;
+			}
+		}
+
+		if (idx == AR5K_EEPROM_N_PD_CURVES)
+			goto err_out;
+
+		ee->ee_pd_gains[mode] = 1;
+
+		pd = &chinfo[pier].pd_curves[idx];
+
+		pd->pd_points = AR5K_EEPROM_N_PWR_POINTS_5111;
+
+		/* Allocate pd points for this curve */
+		pd->pd_step = kcalloc(AR5K_EEPROM_N_PWR_POINTS_5111,
+					sizeof(u8), GFP_KERNEL);
+		if (!pd->pd_step)
+			goto err_out;
+
+		pd->pd_pwr = kcalloc(AR5K_EEPROM_N_PWR_POINTS_5111,
+					sizeof(s16), GFP_KERNEL);
+		if (!pd->pd_pwr)
+			goto err_out;
+
+		/* Fill raw dataset
+		 * (convert power to 0.25dB units
+		 * for RF5112 compatibility) */
+		for (point = 0; point < pd->pd_points; point++) {
+
+			/* Absolute values */
+			pd->pd_pwr[point] = 2 * pcinfo->pwr[point];
+
+			/* Already sorted */
+			pd->pd_step[point] = pcinfo->pcdac[point];
+		}
+
+		/* Set min/max pwr */
+		chinfo[pier].min_pwr = pd->pd_pwr[0];
+		chinfo[pier].max_pwr = pd->pd_pwr[10];
+
+	}
+
+	return 0;
+
+err_out:
+	ath5k_eeprom_free_pcal_info(ah, mode);
+	return -ENOMEM;
+}
+
+/* Parse EEPROM data */
+static int
+ath5k_eeprom_read_pcal_info_5111(struct ath5k_hw *ah, int mode)
+{
+	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+	struct ath5k_chan_pcal_info *pcal;
+	int offset, ret;
+	int i;
+	u16 val;
+
+	offset = AR5K_EEPROM_GROUPS_START(ee->ee_version);
+	switch (mode) {
+	case AR5K_EEPROM_MODE_11A:
+		if (!AR5K_EEPROM_HDR_11A(ee->ee_header))
+			return 0;
+
+		ret = ath5k_eeprom_init_11a_pcal_freq(ah,
+			offset + AR5K_EEPROM_GROUP1_OFFSET);
+		if (ret < 0)
+			return ret;
+
+		offset += AR5K_EEPROM_GROUP2_OFFSET;
+		pcal = ee->ee_pwr_cal_a;
+		break;
+	case AR5K_EEPROM_MODE_11B:
+		if (!AR5K_EEPROM_HDR_11B(ee->ee_header) &&
+		    !AR5K_EEPROM_HDR_11G(ee->ee_header))
+			return 0;
+
+		pcal = ee->ee_pwr_cal_b;
+		offset += AR5K_EEPROM_GROUP3_OFFSET;
+
+		/* fixed piers */
+		pcal[0].freq = 2412;
+		pcal[1].freq = 2447;
+		pcal[2].freq = 2484;
+		ee->ee_n_piers[mode] = 3;
+		break;
+	case AR5K_EEPROM_MODE_11G:
+		if (!AR5K_EEPROM_HDR_11G(ee->ee_header))
+			return 0;
+
+		pcal = ee->ee_pwr_cal_g;
+		offset += AR5K_EEPROM_GROUP4_OFFSET;
+
+		/* fixed piers */
+		pcal[0].freq = 2312;
+		pcal[1].freq = 2412;
+		pcal[2].freq = 2484;
+		ee->ee_n_piers[mode] = 3;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	for (i = 0; i < ee->ee_n_piers[mode]; i++) {
+		struct ath5k_chan_pcal_info_rf5111 *cdata =
+			&pcal[i].rf5111_info;
+
+		AR5K_EEPROM_READ(offset++, val);
+		cdata->pcdac_max = ((val >> 10) & AR5K_EEPROM_PCDAC_M);
+		cdata->pcdac_min = ((val >> 4) & AR5K_EEPROM_PCDAC_M);
+		cdata->pwr[0] = ((val << 2) & AR5K_EEPROM_POWER_M);
+
+		AR5K_EEPROM_READ(offset++, val);
+		cdata->pwr[0] |= ((val >> 14) & 0x3);
+		cdata->pwr[1] = ((val >> 8) & AR5K_EEPROM_POWER_M);
+		cdata->pwr[2] = ((val >> 2) & AR5K_EEPROM_POWER_M);
+		cdata->pwr[3] = ((val << 4) & AR5K_EEPROM_POWER_M);
+
+		AR5K_EEPROM_READ(offset++, val);
+		cdata->pwr[3] |= ((val >> 12) & 0xf);
+		cdata->pwr[4] = ((val >> 6) & AR5K_EEPROM_POWER_M);
+		cdata->pwr[5] = (val  & AR5K_EEPROM_POWER_M);
+
+		AR5K_EEPROM_READ(offset++, val);
+		cdata->pwr[6] = ((val >> 10) & AR5K_EEPROM_POWER_M);
+		cdata->pwr[7] = ((val >> 4) & AR5K_EEPROM_POWER_M);
+		cdata->pwr[8] = ((val << 2) & AR5K_EEPROM_POWER_M);
+
+		AR5K_EEPROM_READ(offset++, val);
+		cdata->pwr[8] |= ((val >> 14) & 0x3);
+		cdata->pwr[9] = ((val >> 8) & AR5K_EEPROM_POWER_M);
+		cdata->pwr[10] = ((val >> 2) & AR5K_EEPROM_POWER_M);
+
+		ath5k_get_pcdac_intercepts(ah, cdata->pcdac_min,
+			cdata->pcdac_max, cdata->pcdac);
+	}
+
+	return ath5k_eeprom_convert_pcal_info_5111(ah, mode, pcal);
+}
+
+
+/*
+ * Read power calibration for RF5112 chips
+ *
+ * For RF5112 we have 4 XPD -eXternal Power Detector- curves
+ * for each calibrated channel on 0, -6, -12 and -18dBm but we only
+ * use the higher (3) and the lower (0) curves. Each curve has 0.5dB
+ * power steps on x axis and PCDAC steps on y axis and looks like a
+ * linear function. To recreate the curve and pass the power values
+ * on hw, we read 4 points for xpd 0 (lower gain -> max power)
+ * and 3 points for xpd 3 (higher gain -> lower power) here and
+ * interpolate later.
+ *
+ * Note: Many vendors just use xpd 0 so xpd 3 is zeroed.
+ */
+
+/* Convert RF5112 specific data to generic raw data
+ * used by interpolation code */
+static int
+ath5k_eeprom_convert_pcal_info_5112(struct ath5k_hw *ah, int mode,
+				struct ath5k_chan_pcal_info *chinfo)
+{
+	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+	struct ath5k_chan_pcal_info_rf5112 *pcinfo;
+	u8 *pdgain_idx = ee->ee_pdc_to_idx[mode];
+	unsigned int pier, pdg, point;
+
+	/* Fill raw data for each calibration pier */
+	for (pier = 0; pier < ee->ee_n_piers[mode]; pier++) {
+
+		pcinfo = &chinfo[pier].rf5112_info;
+
+		/* Allocate pd_curves for this cal pier */
+		chinfo[pier].pd_curves =
+				kcalloc(AR5K_EEPROM_N_PD_CURVES,
+					sizeof(struct ath5k_pdgain_info),
+					GFP_KERNEL);
+
+		if (!chinfo[pier].pd_curves)
+			goto err_out;
+
+		/* Fill pd_curves */
+		for (pdg = 0; pdg < ee->ee_pd_gains[mode]; pdg++) {
+
+			u8 idx = pdgain_idx[pdg];
+			struct ath5k_pdgain_info *pd =
+					&chinfo[pier].pd_curves[idx];
+
+			/* Lowest gain curve (max power) */
+			if (pdg == 0) {
+				/* One more point for better accuracy */
+				pd->pd_points = AR5K_EEPROM_N_XPD0_POINTS;
+
+				/* Allocate pd points for this curve */
+				pd->pd_step = kcalloc(pd->pd_points,
+						sizeof(u8), GFP_KERNEL);
+
+				if (!pd->pd_step)
+					goto err_out;
+
+				pd->pd_pwr = kcalloc(pd->pd_points,
+						sizeof(s16), GFP_KERNEL);
+
+				if (!pd->pd_pwr)
+					goto err_out;
+
+				/* Fill raw dataset
+				 * (all power levels are in 0.25dB units) */
+				pd->pd_step[0] = pcinfo->pcdac_x0[0];
+				pd->pd_pwr[0] = pcinfo->pwr_x0[0];
+
+				for (point = 1; point < pd->pd_points;
+				point++) {
+					/* Absolute values */
+					pd->pd_pwr[point] =
+						pcinfo->pwr_x0[point];
+
+					/* Deltas */
+					pd->pd_step[point] =
+						pd->pd_step[point - 1] +
+						pcinfo->pcdac_x0[point];
+				}
+
+				/* Set min power for this frequency */
+				chinfo[pier].min_pwr = pd->pd_pwr[0];
+
+			/* Highest gain curve (min power) */
+			} else if (pdg == 1) {
+
+				pd->pd_points = AR5K_EEPROM_N_XPD3_POINTS;
+
+				/* Allocate pd points for this curve */
+				pd->pd_step = kcalloc(pd->pd_points,
+						sizeof(u8), GFP_KERNEL);
+
+				if (!pd->pd_step)
+					goto err_out;
+
+				pd->pd_pwr = kcalloc(pd->pd_points,
+						sizeof(s16), GFP_KERNEL);
+
+				if (!pd->pd_pwr)
+					goto err_out;
+
+				/* Fill raw dataset
+				 * (all power levels are in 0.25dB units) */
+				for (point = 0; point < pd->pd_points;
+				point++) {
+					/* Absolute values */
+					pd->pd_pwr[point] =
+						pcinfo->pwr_x3[point];
+
+					/* Fixed points */
+					pd->pd_step[point] =
+						pcinfo->pcdac_x3[point];
+				}
+
+				/* Since we have a higher gain curve
+				 * override min power */
+				chinfo[pier].min_pwr = pd->pd_pwr[0];
+			}
+		}
+	}
+
+	return 0;
+
+err_out:
+	ath5k_eeprom_free_pcal_info(ah, mode);
+	return -ENOMEM;
+}
+
+/* Parse EEPROM data */
+static int
+ath5k_eeprom_read_pcal_info_5112(struct ath5k_hw *ah, int mode)
+{
+	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+	struct ath5k_chan_pcal_info_rf5112 *chan_pcal_info;
+	struct ath5k_chan_pcal_info *gen_chan_info;
+	u8 *pdgain_idx = ee->ee_pdc_to_idx[mode];
+	u32 offset;
+	u8 i, c;
+	u16 val;
+	u8 pd_gains = 0;
+
+	/* Count how many curves we have and
+	 * identify them (which one of the 4
+	 * available curves we have on each count).
+	 * Curves are stored from lower (x0) to
+	 * higher (x3) gain */
+	for (i = 0; i < AR5K_EEPROM_N_PD_CURVES; i++) {
+		/* ee_x_gain[mode] is x gain mask */
+		if ((ee->ee_x_gain[mode] >> i) & 0x1)
+			pdgain_idx[pd_gains++] = i;
+	}
+	ee->ee_pd_gains[mode] = pd_gains;
+
+	if (pd_gains == 0 || pd_gains > 2)
+		return -EINVAL;
+
+	switch (mode) {
+	case AR5K_EEPROM_MODE_11A:
+		/*
+		 * Read 5GHz EEPROM channels
+		 */
+		offset = AR5K_EEPROM_GROUPS_START(ee->ee_version);
+		ath5k_eeprom_init_11a_pcal_freq(ah, offset);
+
+		offset += AR5K_EEPROM_GROUP2_OFFSET;
+		gen_chan_info = ee->ee_pwr_cal_a;
+		break;
+	case AR5K_EEPROM_MODE_11B:
+		offset = AR5K_EEPROM_GROUPS_START(ee->ee_version);
+		if (AR5K_EEPROM_HDR_11A(ee->ee_header))
+			offset += AR5K_EEPROM_GROUP3_OFFSET;
+
+		/* NB: frequency piers parsed during mode init */
+		gen_chan_info = ee->ee_pwr_cal_b;
+		break;
+	case AR5K_EEPROM_MODE_11G:
+		offset = AR5K_EEPROM_GROUPS_START(ee->ee_version);
+		if (AR5K_EEPROM_HDR_11A(ee->ee_header))
+			offset += AR5K_EEPROM_GROUP4_OFFSET;
+		else if (AR5K_EEPROM_HDR_11B(ee->ee_header))
+			offset += AR5K_EEPROM_GROUP2_OFFSET;
+
+		/* NB: frequency piers parsed during mode init */
+		gen_chan_info = ee->ee_pwr_cal_g;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	for (i = 0; i < ee->ee_n_piers[mode]; i++) {
+		chan_pcal_info = &gen_chan_info[i].rf5112_info;
+
+		/* Power values in quarter dB
+		 * for the lower xpd gain curve
+		 * (0 dBm -> higher output power) */
+		for (c = 0; c < AR5K_EEPROM_N_XPD0_POINTS; c++) {
+			AR5K_EEPROM_READ(offset++, val);
+			chan_pcal_info->pwr_x0[c] = (s8) (val & 0xff);
+			chan_pcal_info->pwr_x0[++c] = (s8) ((val >> 8) & 0xff);
+		}
+
+		/* PCDAC steps
+		 * corresponding to the above power
+		 * measurements */
+		AR5K_EEPROM_READ(offset++, val);
+		chan_pcal_info->pcdac_x0[1] = (val & 0x1f);
+		chan_pcal_info->pcdac_x0[2] = ((val >> 5) & 0x1f);
+		chan_pcal_info->pcdac_x0[3] = ((val >> 10) & 0x1f);
+
+		/* Power values in quarter dB
+		 * for the higher xpd gain curve
+		 * (18 dBm -> lower output power) */
+		AR5K_EEPROM_READ(offset++, val);
+		chan_pcal_info->pwr_x3[0] = (s8) (val & 0xff);
+		chan_pcal_info->pwr_x3[1] = (s8) ((val >> 8) & 0xff);
+
+		AR5K_EEPROM_READ(offset++, val);
+		chan_pcal_info->pwr_x3[2] = (val & 0xff);
+
+		/* PCDAC steps
+		 * corresponding to the above power
+		 * measurements (fixed) */
+		chan_pcal_info->pcdac_x3[0] = 20;
+		chan_pcal_info->pcdac_x3[1] = 35;
+		chan_pcal_info->pcdac_x3[2] = 63;
+
+		if (ee->ee_version >= AR5K_EEPROM_VERSION_4_3) {
+			chan_pcal_info->pcdac_x0[0] = ((val >> 8) & 0x3f);
+
+			/* Last xpd0 power level is also channel maximum */
+			gen_chan_info[i].max_pwr = chan_pcal_info->pwr_x0[3];
+		} else {
+			chan_pcal_info->pcdac_x0[0] = 1;
+			gen_chan_info[i].max_pwr = (s8) ((val >> 8) & 0xff);
+		}
+
+	}
+
+	return ath5k_eeprom_convert_pcal_info_5112(ah, mode, gen_chan_info);
+}
+
+
+/*
+ * Read power calibration for RF2413 chips
+ *
+ * For RF2413 we have a Power to PDDAC table (Power Detector)
+ * instead of a PCDAC and 4 pd gain curves for each calibrated channel.
+ * Each curve has power on x axis in 0.5 db steps and PDDADC steps on y
+ * axis and looks like an exponential function like the RF5111 curve.
+ *
+ * To recreate the curves we read here the points and interpolate
+ * later. Note that in most cases only 2 (higher and lower) curves are
+ * used (like RF5112) but vendors have the opportunity to include all
+ * 4 curves on eeprom. The final curve (higher power) has an extra
+ * point for better accuracy like RF5112.
+ */
+
+/* For RF2413 power calibration data doesn't start on a fixed location and
+ * if a mode is not supported, its section is missing -not zeroed-.
+ * So we need to calculate the starting offset for each section by using
+ * these two functions */
+
+/* Return the size of each section based on the mode and the number of pd
+ * gains available (maximum 4). */
+static inline unsigned int
+ath5k_pdgains_size_2413(struct ath5k_eeprom_info *ee, unsigned int mode)
+{
+	static const unsigned int pdgains_size[] = { 4, 6, 9, 12 };
+	unsigned int sz;
+
+	sz = pdgains_size[ee->ee_pd_gains[mode] - 1];
+	sz *= ee->ee_n_piers[mode];
+
+	return sz;
+}
+
+/* Return the starting offset for a section based on the modes supported
+ * and each section's size. */
+static unsigned int
+ath5k_cal_data_offset_2413(struct ath5k_eeprom_info *ee, int mode)
+{
+	u32 offset = AR5K_EEPROM_CAL_DATA_START(ee->ee_misc4);
+
+	switch (mode) {
+	case AR5K_EEPROM_MODE_11G:
+		if (AR5K_EEPROM_HDR_11B(ee->ee_header))
+			offset += ath5k_pdgains_size_2413(ee,
+					AR5K_EEPROM_MODE_11B) +
+					AR5K_EEPROM_N_2GHZ_CHAN_2413 / 2;
+		fallthrough;
+	case AR5K_EEPROM_MODE_11B:
+		if (AR5K_EEPROM_HDR_11A(ee->ee_header))
+			offset += ath5k_pdgains_size_2413(ee,
+					AR5K_EEPROM_MODE_11A) +
+					AR5K_EEPROM_N_5GHZ_CHAN / 2;
+		fallthrough;
+	case AR5K_EEPROM_MODE_11A:
+		break;
+	default:
+		break;
+	}
+
+	return offset;
+}
+
+/* Convert RF2413 specific data to generic raw data
+ * used by interpolation code */
+static int
+ath5k_eeprom_convert_pcal_info_2413(struct ath5k_hw *ah, int mode,
+				struct ath5k_chan_pcal_info *chinfo)
+{
+	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+	struct ath5k_chan_pcal_info_rf2413 *pcinfo;
+	u8 *pdgain_idx = ee->ee_pdc_to_idx[mode];
+	unsigned int pier, pdg, point;
+
+	/* Fill raw data for each calibration pier */
+	for (pier = 0; pier < ee->ee_n_piers[mode]; pier++) {
+
+		pcinfo = &chinfo[pier].rf2413_info;
+
+		/* Allocate pd_curves for this cal pier */
+		chinfo[pier].pd_curves =
+				kcalloc(AR5K_EEPROM_N_PD_CURVES,
+					sizeof(struct ath5k_pdgain_info),
+					GFP_KERNEL);
+
+		if (!chinfo[pier].pd_curves)
+			goto err_out;
+
+		/* Fill pd_curves */
+		for (pdg = 0; pdg < ee->ee_pd_gains[mode]; pdg++) {
+
+			u8 idx = pdgain_idx[pdg];
+			struct ath5k_pdgain_info *pd =
+					&chinfo[pier].pd_curves[idx];
+
+			/* One more point for the highest power
+			 * curve (lowest gain) */
+			if (pdg == ee->ee_pd_gains[mode] - 1)
+				pd->pd_points = AR5K_EEPROM_N_PD_POINTS;
+			else
+				pd->pd_points = AR5K_EEPROM_N_PD_POINTS - 1;
+
+			/* Allocate pd points for this curve */
+			pd->pd_step = kcalloc(pd->pd_points,
+					sizeof(u8), GFP_KERNEL);
+
+			if (!pd->pd_step)
+				goto err_out;
+
+			pd->pd_pwr = kcalloc(pd->pd_points,
+					sizeof(s16), GFP_KERNEL);
+
+			if (!pd->pd_pwr)
+				goto err_out;
+
+			/* Fill raw dataset
+			 * convert all pwr levels to
+			 * quarter dB for RF5112 compatibility */
+			pd->pd_step[0] = pcinfo->pddac_i[pdg];
+			pd->pd_pwr[0] = 4 * pcinfo->pwr_i[pdg];
+
+			for (point = 1; point < pd->pd_points; point++) {
+
+				pd->pd_pwr[point] = pd->pd_pwr[point - 1] +
+					2 * pcinfo->pwr[pdg][point - 1];
+
+				pd->pd_step[point] = pd->pd_step[point - 1] +
+						pcinfo->pddac[pdg][point - 1];
+
+			}
+
+			/* Highest gain curve -> min power */
+			if (pdg == 0)
+				chinfo[pier].min_pwr = pd->pd_pwr[0];
+
+			/* Lowest gain curve -> max power */
+			if (pdg == ee->ee_pd_gains[mode] - 1)
+				chinfo[pier].max_pwr =
+					pd->pd_pwr[pd->pd_points - 1];
+		}
+	}
+
+	return 0;
+
+err_out:
+	ath5k_eeprom_free_pcal_info(ah, mode);
+	return -ENOMEM;
+}
+
+/* Parse EEPROM data */
+static int
+ath5k_eeprom_read_pcal_info_2413(struct ath5k_hw *ah, int mode)
+{
+	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+	struct ath5k_chan_pcal_info_rf2413 *pcinfo;
+	struct ath5k_chan_pcal_info *chinfo;
+	u8 *pdgain_idx = ee->ee_pdc_to_idx[mode];
+	u32 offset;
+	int idx, i;
+	u16 val;
+	u8 pd_gains = 0;
+
+	/* Count how many curves we have and
+	 * identify them (which one of the 4
+	 * available curves we have on each count).
+	 * Curves are stored from higher to
+	 * lower gain so we go backwards */
+	for (idx = AR5K_EEPROM_N_PD_CURVES - 1; idx >= 0; idx--) {
+		/* ee_x_gain[mode] is x gain mask */
+		if ((ee->ee_x_gain[mode] >> idx) & 0x1)
+			pdgain_idx[pd_gains++] = idx;
+
+	}
+	ee->ee_pd_gains[mode] = pd_gains;
+
+	if (pd_gains == 0)
+		return -EINVAL;
+
+	offset = ath5k_cal_data_offset_2413(ee, mode);
+	switch (mode) {
+	case AR5K_EEPROM_MODE_11A:
+		if (!AR5K_EEPROM_HDR_11A(ee->ee_header))
+			return 0;
+
+		ath5k_eeprom_init_11a_pcal_freq(ah, offset);
+		offset += AR5K_EEPROM_N_5GHZ_CHAN / 2;
+		chinfo = ee->ee_pwr_cal_a;
+		break;
+	case AR5K_EEPROM_MODE_11B:
+		if (!AR5K_EEPROM_HDR_11B(ee->ee_header))
+			return 0;
+
+		ath5k_eeprom_init_11bg_2413(ah, mode, offset);
+		offset += AR5K_EEPROM_N_2GHZ_CHAN_2413 / 2;
+		chinfo = ee->ee_pwr_cal_b;
+		break;
+	case AR5K_EEPROM_MODE_11G:
+		if (!AR5K_EEPROM_HDR_11G(ee->ee_header))
+			return 0;
+
+		ath5k_eeprom_init_11bg_2413(ah, mode, offset);
+		offset += AR5K_EEPROM_N_2GHZ_CHAN_2413 / 2;
+		chinfo = ee->ee_pwr_cal_g;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	for (i = 0; i < ee->ee_n_piers[mode]; i++) {
+		pcinfo = &chinfo[i].rf2413_info;
+
+		/*
+		 * Read pwr_i, pddac_i and the first
+		 * 2 pd points (pwr, pddac)
+		 */
+		AR5K_EEPROM_READ(offset++, val);
+		pcinfo->pwr_i[0] = val & 0x1f;
+		pcinfo->pddac_i[0] = (val >> 5) & 0x7f;
+		pcinfo->pwr[0][0] = (val >> 12) & 0xf;
+
+		AR5K_EEPROM_READ(offset++, val);
+		pcinfo->pddac[0][0] = val & 0x3f;
+		pcinfo->pwr[0][1] = (val >> 6) & 0xf;
+		pcinfo->pddac[0][1] = (val >> 10) & 0x3f;
+
+		AR5K_EEPROM_READ(offset++, val);
+		pcinfo->pwr[0][2] = val & 0xf;
+		pcinfo->pddac[0][2] = (val >> 4) & 0x3f;
+
+		pcinfo->pwr[0][3] = 0;
+		pcinfo->pddac[0][3] = 0;
+
+		if (pd_gains > 1) {
+			/*
+			 * Pd gain 0 is not the last pd gain
+			 * so it only has 2 pd points.
+			 * Continue with pd gain 1.
+			 */
+			pcinfo->pwr_i[1] = (val >> 10) & 0x1f;
+
+			pcinfo->pddac_i[1] = (val >> 15) & 0x1;
+			AR5K_EEPROM_READ(offset++, val);
+			pcinfo->pddac_i[1] |= (val & 0x3F) << 1;
+
+			pcinfo->pwr[1][0] = (val >> 6) & 0xf;
+			pcinfo->pddac[1][0] = (val >> 10) & 0x3f;
+
+			AR5K_EEPROM_READ(offset++, val);
+			pcinfo->pwr[1][1] = val & 0xf;
+			pcinfo->pddac[1][1] = (val >> 4) & 0x3f;
+			pcinfo->pwr[1][2] = (val >> 10) & 0xf;
+
+			pcinfo->pddac[1][2] = (val >> 14) & 0x3;
+			AR5K_EEPROM_READ(offset++, val);
+			pcinfo->pddac[1][2] |= (val & 0xF) << 2;
+
+			pcinfo->pwr[1][3] = 0;
+			pcinfo->pddac[1][3] = 0;
+		} else if (pd_gains == 1) {
+			/*
+			 * Pd gain 0 is the last one so
+			 * read the extra point.
+			 */
+			pcinfo->pwr[0][3] = (val >> 10) & 0xf;
+
+			pcinfo->pddac[0][3] = (val >> 14) & 0x3;
+			AR5K_EEPROM_READ(offset++, val);
+			pcinfo->pddac[0][3] |= (val & 0xF) << 2;
+		}
+
+		/*
+		 * Proceed with the other pd_gains
+		 * as above.
+		 */
+		if (pd_gains > 2) {
+			pcinfo->pwr_i[2] = (val >> 4) & 0x1f;
+			pcinfo->pddac_i[2] = (val >> 9) & 0x7f;
+
+			AR5K_EEPROM_READ(offset++, val);
+			pcinfo->pwr[2][0] = (val >> 0) & 0xf;
+			pcinfo->pddac[2][0] = (val >> 4) & 0x3f;
+			pcinfo->pwr[2][1] = (val >> 10) & 0xf;
+
+			pcinfo->pddac[2][1] = (val >> 14) & 0x3;
+			AR5K_EEPROM_READ(offset++, val);
+			pcinfo->pddac[2][1] |= (val & 0xF) << 2;
+
+			pcinfo->pwr[2][2] = (val >> 4) & 0xf;
+			pcinfo->pddac[2][2] = (val >> 8) & 0x3f;
+
+			pcinfo->pwr[2][3] = 0;
+			pcinfo->pddac[2][3] = 0;
+		} else if (pd_gains == 2) {
+			pcinfo->pwr[1][3] = (val >> 4) & 0xf;
+			pcinfo->pddac[1][3] = (val >> 8) & 0x3f;
+		}
+
+		if (pd_gains > 3) {
+			pcinfo->pwr_i[3] = (val >> 14) & 0x3;
+			AR5K_EEPROM_READ(offset++, val);
+			pcinfo->pwr_i[3] |= ((val >> 0) & 0x7) << 2;
+
+			pcinfo->pddac_i[3] = (val >> 3) & 0x7f;
+			pcinfo->pwr[3][0] = (val >> 10) & 0xf;
+			pcinfo->pddac[3][0] = (val >> 14) & 0x3;
+
+			AR5K_EEPROM_READ(offset++, val);
+			pcinfo->pddac[3][0] |= (val & 0xF) << 2;
+			pcinfo->pwr[3][1] = (val >> 4) & 0xf;
+			pcinfo->pddac[3][1] = (val >> 8) & 0x3f;
+
+			pcinfo->pwr[3][2] = (val >> 14) & 0x3;
+			AR5K_EEPROM_READ(offset++, val);
+			pcinfo->pwr[3][2] |= ((val >> 0) & 0x3) << 2;
+
+			pcinfo->pddac[3][2] = (val >> 2) & 0x3f;
+			pcinfo->pwr[3][3] = (val >> 8) & 0xf;
+
+			pcinfo->pddac[3][3] = (val >> 12) & 0xF;
+			AR5K_EEPROM_READ(offset++, val);
+			pcinfo->pddac[3][3] |= ((val >> 0) & 0x3) << 4;
+		} else if (pd_gains == 3) {
+			pcinfo->pwr[2][3] = (val >> 14) & 0x3;
+			AR5K_EEPROM_READ(offset++, val);
+			pcinfo->pwr[2][3] |= ((val >> 0) & 0x3) << 2;
+
+			pcinfo->pddac[2][3] = (val >> 2) & 0x3f;
+		}
+	}
+
+	return ath5k_eeprom_convert_pcal_info_2413(ah, mode, chinfo);
+}
+
+
+/*
+ * Read per rate target power (this is the maximum tx power
+ * supported by the card). This info is used when setting
+ * tx power, no matter the channel.
+ *
+ * This also works for v5 EEPROMs.
+ */
+static int
+ath5k_eeprom_read_target_rate_pwr_info(struct ath5k_hw *ah, unsigned int mode)
+{
+	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+	struct ath5k_rate_pcal_info *rate_pcal_info;
+	u8 *rate_target_pwr_num;
+	u32 offset;
+	u16 val;
+	int i;
+
+	offset = AR5K_EEPROM_TARGET_PWRSTART(ee->ee_misc1);
+	rate_target_pwr_num = &ee->ee_rate_target_pwr_num[mode];
+	switch (mode) {
+	case AR5K_EEPROM_MODE_11A:
+		offset += AR5K_EEPROM_TARGET_PWR_OFF_11A(ee->ee_version);
+		rate_pcal_info = ee->ee_rate_tpwr_a;
+		ee->ee_rate_target_pwr_num[mode] = AR5K_EEPROM_N_5GHZ_RATE_CHAN;
+		break;
+	case AR5K_EEPROM_MODE_11B:
+		offset += AR5K_EEPROM_TARGET_PWR_OFF_11B(ee->ee_version);
+		rate_pcal_info = ee->ee_rate_tpwr_b;
+		ee->ee_rate_target_pwr_num[mode] = 2; /* 3rd is g mode's 1st */
+		break;
+	case AR5K_EEPROM_MODE_11G:
+		offset += AR5K_EEPROM_TARGET_PWR_OFF_11G(ee->ee_version);
+		rate_pcal_info = ee->ee_rate_tpwr_g;
+		ee->ee_rate_target_pwr_num[mode] = AR5K_EEPROM_N_2GHZ_CHAN;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* Different freq mask for older eeproms (<= v3.2) */
+	if (ee->ee_version <= AR5K_EEPROM_VERSION_3_2) {
+		for (i = 0; i < (*rate_target_pwr_num); i++) {
+			AR5K_EEPROM_READ(offset++, val);
+			rate_pcal_info[i].freq =
+			    ath5k_eeprom_bin2freq(ee, (val >> 9) & 0x7f, mode);
+
+			rate_pcal_info[i].target_power_6to24 = ((val >> 3) & 0x3f);
+			rate_pcal_info[i].target_power_36 = (val << 3) & 0x3f;
+
+			AR5K_EEPROM_READ(offset++, val);
+
+			if (rate_pcal_info[i].freq == AR5K_EEPROM_CHANNEL_DIS ||
+			    val == 0) {
+				(*rate_target_pwr_num) = i;
+				break;
+			}
+
+			rate_pcal_info[i].target_power_36 |= ((val >> 13) & 0x7);
+			rate_pcal_info[i].target_power_48 = ((val >> 7) & 0x3f);
+			rate_pcal_info[i].target_power_54 = ((val >> 1) & 0x3f);
+		}
+	} else {
+		for (i = 0; i < (*rate_target_pwr_num); i++) {
+			AR5K_EEPROM_READ(offset++, val);
+			rate_pcal_info[i].freq =
+			    ath5k_eeprom_bin2freq(ee, (val >> 8) & 0xff, mode);
+
+			rate_pcal_info[i].target_power_6to24 = ((val >> 2) & 0x3f);
+			rate_pcal_info[i].target_power_36 = (val << 4) & 0x3f;
+
+			AR5K_EEPROM_READ(offset++, val);
+
+			if (rate_pcal_info[i].freq == AR5K_EEPROM_CHANNEL_DIS ||
+			    val == 0) {
+				(*rate_target_pwr_num) = i;
+				break;
+			}
+
+			rate_pcal_info[i].target_power_36 |= (val >> 12) & 0xf;
+			rate_pcal_info[i].target_power_48 = ((val >> 6) & 0x3f);
+			rate_pcal_info[i].target_power_54 = (val & 0x3f);
+		}
+	}
+
+	return 0;
+}
+
+
+/*
+ * Read per channel calibration info from EEPROM
+ *
+ * This info is used to calibrate the baseband power table. Imagine
+ * that for each channel there is a power curve that's hw specific
+ * (depends on amplifier etc) and we try to "correct" this curve using
+ * offsets we pass on to phy chip (baseband -> before amplifier) so that
+ * it can use accurate power values when setting tx power (takes amplifier's
+ * performance on each channel into account).
+ *
+ * EEPROM provides us with the offsets for some pre-calibrated channels
+ * and we have to interpolate to create the full table for these channels and
+ * also the table for any channel.
+ */
+static int
+ath5k_eeprom_read_pcal_info(struct ath5k_hw *ah)
+{
+	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+	int (*read_pcal)(struct ath5k_hw *hw, int mode);
+	int mode;
+	int err;
+
+	if ((ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) &&
+			(AR5K_EEPROM_EEMAP(ee->ee_misc0) == 1))
+		read_pcal = ath5k_eeprom_read_pcal_info_5112;
+	else if ((ah->ah_ee_version >= AR5K_EEPROM_VERSION_5_0) &&
+			(AR5K_EEPROM_EEMAP(ee->ee_misc0) == 2))
+		read_pcal = ath5k_eeprom_read_pcal_info_2413;
+	else
+		read_pcal = ath5k_eeprom_read_pcal_info_5111;
+
+
+	for (mode = AR5K_EEPROM_MODE_11A; mode <= AR5K_EEPROM_MODE_11G;
+	mode++) {
+		err = read_pcal(ah, mode);
+		if (err)
+			return err;
+
+		err = ath5k_eeprom_read_target_rate_pwr_info(ah, mode);
+		if (err < 0)
+			return err;
+	}
+
+	return 0;
+}
+
+/* Read conformance test limits used for regulatory control */
+static int
+ath5k_eeprom_read_ctl_info(struct ath5k_hw *ah)
+{
+	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+	struct ath5k_edge_power *rep;
+	unsigned int fmask, pmask;
+	unsigned int ctl_mode;
+	int i, j;
+	u32 offset;
+	u16 val;
+
+	pmask = AR5K_EEPROM_POWER_M;
+	fmask = AR5K_EEPROM_FREQ_M(ee->ee_version);
+	offset = AR5K_EEPROM_CTL(ee->ee_version);
+	ee->ee_ctls = AR5K_EEPROM_N_CTLS(ee->ee_version);
+	for (i = 0; i < ee->ee_ctls; i += 2) {
+		AR5K_EEPROM_READ(offset++, val);
+		ee->ee_ctl[i] = (val >> 8) & 0xff;
+		ee->ee_ctl[i + 1] = val & 0xff;
+	}
+
+	offset = AR5K_EEPROM_GROUP8_OFFSET;
+	if (ee->ee_version >= AR5K_EEPROM_VERSION_4_0)
+		offset += AR5K_EEPROM_TARGET_PWRSTART(ee->ee_misc1) -
+			AR5K_EEPROM_GROUP5_OFFSET;
+	else
+		offset += AR5K_EEPROM_GROUPS_START(ee->ee_version);
+
+	rep = ee->ee_ctl_pwr;
+	for (i = 0; i < ee->ee_ctls; i++) {
+		switch (ee->ee_ctl[i] & AR5K_CTL_MODE_M) {
+		case AR5K_CTL_11A:
+		case AR5K_CTL_TURBO:
+			ctl_mode = AR5K_EEPROM_MODE_11A;
+			break;
+		default:
+			ctl_mode = AR5K_EEPROM_MODE_11G;
+			break;
+		}
+		if (ee->ee_ctl[i] == 0) {
+			if (ee->ee_version >= AR5K_EEPROM_VERSION_3_3)
+				offset += 8;
+			else
+				offset += 7;
+			rep += AR5K_EEPROM_N_EDGES;
+			continue;
+		}
+		if (ee->ee_version >= AR5K_EEPROM_VERSION_3_3) {
+			for (j = 0; j < AR5K_EEPROM_N_EDGES; j += 2) {
+				AR5K_EEPROM_READ(offset++, val);
+				rep[j].freq = (val >> 8) & fmask;
+				rep[j + 1].freq = val & fmask;
+			}
+			for (j = 0; j < AR5K_EEPROM_N_EDGES; j += 2) {
+				AR5K_EEPROM_READ(offset++, val);
+				rep[j].edge = (val >> 8) & pmask;
+				rep[j].flag = (val >> 14) & 1;
+				rep[j + 1].edge = val & pmask;
+				rep[j + 1].flag = (val >> 6) & 1;
+			}
+		} else {
+			AR5K_EEPROM_READ(offset++, val);
+			rep[0].freq = (val >> 9) & fmask;
+			rep[1].freq = (val >> 2) & fmask;
+			rep[2].freq = (val << 5) & fmask;
+
+			AR5K_EEPROM_READ(offset++, val);
+			rep[2].freq |= (val >> 11) & 0x1f;
+			rep[3].freq = (val >> 4) & fmask;
+			rep[4].freq = (val << 3) & fmask;
+
+			AR5K_EEPROM_READ(offset++, val);
+			rep[4].freq |= (val >> 13) & 0x7;
+			rep[5].freq = (val >> 6) & fmask;
+			rep[6].freq = (val << 1) & fmask;
+
+			AR5K_EEPROM_READ(offset++, val);
+			rep[6].freq |= (val >> 15) & 0x1;
+			rep[7].freq = (val >> 8) & fmask;
+
+			rep[0].edge = (val >> 2) & pmask;
+			rep[1].edge = (val << 4) & pmask;
+
+			AR5K_EEPROM_READ(offset++, val);
+			rep[1].edge |= (val >> 12) & 0xf;
+			rep[2].edge = (val >> 6) & pmask;
+			rep[3].edge = val & pmask;
+
+			AR5K_EEPROM_READ(offset++, val);
+			rep[4].edge = (val >> 10) & pmask;
+			rep[5].edge = (val >> 4) & pmask;
+			rep[6].edge = (val << 2) & pmask;
+
+			AR5K_EEPROM_READ(offset++, val);
+			rep[6].edge |= (val >> 14) & 0x3;
+			rep[7].edge = (val >> 8) & pmask;
+		}
+		for (j = 0; j < AR5K_EEPROM_N_EDGES; j++) {
+			rep[j].freq = ath5k_eeprom_bin2freq(ee,
+				rep[j].freq, ctl_mode);
+		}
+		rep += AR5K_EEPROM_N_EDGES;
+	}
+
+	return 0;
+}
+
+static int
+ath5k_eeprom_read_spur_chans(struct ath5k_hw *ah)
+{
+	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+	u32 offset;
+	u16 val;
+	int  i;
+
+	offset = AR5K_EEPROM_CTL(ee->ee_version) +
+				AR5K_EEPROM_N_CTLS(ee->ee_version);
+
+	if (ee->ee_version < AR5K_EEPROM_VERSION_5_3) {
+		/* No spur info for 5GHz */
+		ee->ee_spur_chans[0][0] = AR5K_EEPROM_NO_SPUR;
+		/* 2 channels for 2GHz (2464/2420) */
+		ee->ee_spur_chans[0][1] = AR5K_EEPROM_5413_SPUR_CHAN_1;
+		ee->ee_spur_chans[1][1] = AR5K_EEPROM_5413_SPUR_CHAN_2;
+		ee->ee_spur_chans[2][1] = AR5K_EEPROM_NO_SPUR;
+	} else if (ee->ee_version >= AR5K_EEPROM_VERSION_5_3) {
+		for (i = 0; i < AR5K_EEPROM_N_SPUR_CHANS; i++) {
+			AR5K_EEPROM_READ(offset, val);
+			ee->ee_spur_chans[i][0] = val;
+			AR5K_EEPROM_READ(offset + AR5K_EEPROM_N_SPUR_CHANS,
+									val);
+			ee->ee_spur_chans[i][1] = val;
+			offset++;
+		}
+	}
+
+	return 0;
+}
+
+
+/***********************\
+* Init/Detach functions *
+\***********************/
+
+/*
+ * Initialize eeprom data structure
+ */
+int
+ath5k_eeprom_init(struct ath5k_hw *ah)
+{
+	int err;
+
+	err = ath5k_eeprom_init_header(ah);
+	if (err < 0)
+		return err;
+
+	err = ath5k_eeprom_init_modes(ah);
+	if (err < 0)
+		return err;
+
+	err = ath5k_eeprom_read_pcal_info(ah);
+	if (err < 0)
+		return err;
+
+	err = ath5k_eeprom_read_ctl_info(ah);
+	if (err < 0)
+		return err;
+
+	err = ath5k_eeprom_read_spur_chans(ah);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
+void
+ath5k_eeprom_detach(struct ath5k_hw *ah)
+{
+	u8 mode;
+
+	for (mode = AR5K_EEPROM_MODE_11A; mode <= AR5K_EEPROM_MODE_11G; mode++)
+		ath5k_eeprom_free_pcal_info(ah, mode);
+}
+
+int
+ath5k_eeprom_mode_from_channel(struct ath5k_hw *ah,
+		struct ieee80211_channel *channel)
+{
+	switch (channel->hw_value) {
+	case AR5K_MODE_11A:
+		return AR5K_EEPROM_MODE_11A;
+	case AR5K_MODE_11G:
+		return AR5K_EEPROM_MODE_11G;
+	case AR5K_MODE_11B:
+		return AR5K_EEPROM_MODE_11B;
+	default:
+		ATH5K_WARN(ah, "channel is not A/B/G!");
+		return AR5K_EEPROM_MODE_11A;
+	}
+}