Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 356 insertions, 0 deletions

diff --git a/drivers/net/wireless/ath/ath6kl/target.h b/drivers/net/wireless/ath/ath6kl/target.h
new file mode 100644
index 000000000..d5eeeae77
--- /dev/null
+++ b/drivers/net/wireless/ath/ath6kl/target.h
@@ -0,0 +1,356 @@
+/*
+ * Copyright (c) 2004-2010 Atheros Communications Inc.
+ * Copyright (c) 2011 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef TARGET_H
+#define TARGET_H
+
+#define AR6003_BOARD_DATA_SZ		1024
+#define AR6003_BOARD_EXT_DATA_SZ	768
+#define AR6003_BOARD_EXT_DATA_SZ_V2	1024
+
+#define AR6004_BOARD_DATA_SZ     6144
+#define AR6004_BOARD_EXT_DATA_SZ 0
+
+#define RESET_CONTROL_ADDRESS		0x00004000
+#define RESET_CONTROL_COLD_RST		0x00000100
+#define RESET_CONTROL_MBOX_RST		0x00000004
+
+#define CPU_CLOCK_STANDARD_S		0
+#define CPU_CLOCK_STANDARD		0x00000003
+#define CPU_CLOCK_ADDRESS		0x00000020
+
+#define CLOCK_CONTROL_ADDRESS		0x00000028
+#define CLOCK_CONTROL_LF_CLK32_S	2
+#define CLOCK_CONTROL_LF_CLK32		0x00000004
+
+#define SYSTEM_SLEEP_ADDRESS		0x000000c4
+#define SYSTEM_SLEEP_DISABLE_S		0
+#define SYSTEM_SLEEP_DISABLE		0x00000001
+
+#define LPO_CAL_ADDRESS			0x000000e0
+#define LPO_CAL_ENABLE_S		20
+#define LPO_CAL_ENABLE			0x00100000
+
+#define GPIO_PIN9_ADDRESS		0x0000004c
+#define GPIO_PIN10_ADDRESS		0x00000050
+#define GPIO_PIN11_ADDRESS		0x00000054
+#define GPIO_PIN12_ADDRESS		0x00000058
+#define GPIO_PIN13_ADDRESS		0x0000005c
+
+#define HOST_INT_STATUS_ADDRESS		0x00000400
+#define HOST_INT_STATUS_ERROR_S		7
+#define HOST_INT_STATUS_ERROR		0x00000080
+
+#define HOST_INT_STATUS_CPU_S		6
+#define HOST_INT_STATUS_CPU		0x00000040
+
+#define HOST_INT_STATUS_COUNTER_S	4
+#define HOST_INT_STATUS_COUNTER		0x00000010
+
+#define CPU_INT_STATUS_ADDRESS		0x00000401
+
+#define ERROR_INT_STATUS_ADDRESS	0x00000402
+#define ERROR_INT_STATUS_WAKEUP_S	2
+#define ERROR_INT_STATUS_WAKEUP		0x00000004
+
+#define ERROR_INT_STATUS_RX_UNDERFLOW_S	1
+#define ERROR_INT_STATUS_RX_UNDERFLOW	0x00000002
+
+#define ERROR_INT_STATUS_TX_OVERFLOW_S	0
+#define ERROR_INT_STATUS_TX_OVERFLOW	0x00000001
+
+#define COUNTER_INT_STATUS_ADDRESS	0x00000403
+#define COUNTER_INT_STATUS_COUNTER_S	0
+#define COUNTER_INT_STATUS_COUNTER	0x000000ff
+
+#define RX_LOOKAHEAD_VALID_ADDRESS	0x00000405
+
+#define INT_STATUS_ENABLE_ADDRESS	0x00000418
+#define INT_STATUS_ENABLE_ERROR_S	7
+#define INT_STATUS_ENABLE_ERROR		0x00000080
+
+#define INT_STATUS_ENABLE_CPU_S		6
+#define INT_STATUS_ENABLE_CPU		0x00000040
+
+#define INT_STATUS_ENABLE_INT_S		5
+#define INT_STATUS_ENABLE_INT		0x00000020
+#define INT_STATUS_ENABLE_COUNTER_S	4
+#define INT_STATUS_ENABLE_COUNTER	0x00000010
+
+#define INT_STATUS_ENABLE_MBOX_DATA_S	0
+#define INT_STATUS_ENABLE_MBOX_DATA	0x0000000f
+
+#define CPU_INT_STATUS_ENABLE_ADDRESS	0x00000419
+#define CPU_INT_STATUS_ENABLE_BIT_S	0
+#define CPU_INT_STATUS_ENABLE_BIT	0x000000ff
+
+#define ERROR_STATUS_ENABLE_ADDRESS		0x0000041a
+#define ERROR_STATUS_ENABLE_RX_UNDERFLOW_S	1
+#define ERROR_STATUS_ENABLE_RX_UNDERFLOW	0x00000002
+
+#define ERROR_STATUS_ENABLE_TX_OVERFLOW_S	0
+#define ERROR_STATUS_ENABLE_TX_OVERFLOW		0x00000001
+
+#define COUNTER_INT_STATUS_ENABLE_ADDRESS	0x0000041b
+#define COUNTER_INT_STATUS_ENABLE_BIT_S		0
+#define COUNTER_INT_STATUS_ENABLE_BIT		0x000000ff
+
+#define COUNT_ADDRESS			0x00000420
+
+#define COUNT_DEC_ADDRESS		0x00000440
+
+#define WINDOW_DATA_ADDRESS		0x00000474
+#define WINDOW_WRITE_ADDR_ADDRESS	0x00000478
+#define WINDOW_READ_ADDR_ADDRESS	0x0000047c
+#define CPU_DBG_SEL_ADDRESS		0x00000483
+#define CPU_DBG_ADDRESS			0x00000484
+
+#define LOCAL_SCRATCH_ADDRESS		0x000000c0
+#define ATH6KL_OPTION_SLEEP_DISABLE	0x08
+
+#define RTC_BASE_ADDRESS		0x00004000
+#define GPIO_BASE_ADDRESS		0x00014000
+#define MBOX_BASE_ADDRESS		0x00018000
+#define ANALOG_INTF_BASE_ADDRESS	0x0001c000
+
+/* real name of the register is unknown */
+#define ATH6KL_ANALOG_PLL_REGISTER	(ANALOG_INTF_BASE_ADDRESS + 0x284)
+
+#define SM(f, v)	(((v) << f##_S) & f)
+#define MS(f, v)	(((v) & f) >> f##_S)
+
+/*
+ * xxx_HOST_INTEREST_ADDRESS is the address in Target RAM of the
+ * host_interest structure.
+ *
+ * Host Interest is shared between Host and Target in order to coordinate
+ * between the two, and is intended to remain constant (with additions only
+ * at the end).
+ */
+#define ATH6KL_AR6003_HI_START_ADDR           0x00540600
+#define ATH6KL_AR6004_HI_START_ADDR           0x00400800
+
+/*
+ * These are items that the Host may need to access
+ * via BMI or via the Diagnostic Window. The position
+ * of items in this structure must remain constant.
+ * across firmware revisions!
+ *
+ * Types for each item must be fixed size across target and host platforms.
+ * The structure is used only to calculate offset for each register with
+ * HI_ITEM() macro, no values are stored to it.
+ *
+ * More items may be added at the end.
+ */
+struct host_interest {
+	/*
+	 * Pointer to application-defined area, if any.
+	 * Set by Target application during startup.
+	 */
+	u32 hi_app_host_interest;                      /* 0x00 */
+
+	/* Pointer to register dump area, valid after Target crash. */
+	u32 hi_failure_state;                          /* 0x04 */
+
+	/* Pointer to debug logging header */
+	u32 hi_dbglog_hdr;                             /* 0x08 */
+
+	u32 hi_unused1;                       /* 0x0c */
+
+	/*
+	 * General-purpose flag bits, similar to ATH6KL_OPTION_* flags.
+	 * Can be used by application rather than by OS.
+	 */
+	u32 hi_option_flag;                            /* 0x10 */
+
+	/*
+	 * Boolean that determines whether or not to
+	 * display messages on the serial port.
+	 */
+	u32 hi_serial_enable;                          /* 0x14 */
+
+	/* Start address of DataSet index, if any */
+	u32 hi_dset_list_head;                         /* 0x18 */
+
+	/* Override Target application start address */
+	u32 hi_app_start;                              /* 0x1c */
+
+	/* Clock and voltage tuning */
+	u32 hi_skip_clock_init;                        /* 0x20 */
+	u32 hi_core_clock_setting;                     /* 0x24 */
+	u32 hi_cpu_clock_setting;                      /* 0x28 */
+	u32 hi_system_sleep_setting;                   /* 0x2c */
+	u32 hi_xtal_control_setting;                   /* 0x30 */
+	u32 hi_pll_ctrl_setting_24ghz;                 /* 0x34 */
+	u32 hi_pll_ctrl_setting_5ghz;                  /* 0x38 */
+	u32 hi_ref_voltage_trim_setting;               /* 0x3c */
+	u32 hi_clock_info;                             /* 0x40 */
+
+	/*
+	 * Flash configuration overrides, used only
+	 * when firmware is not executing from flash.
+	 * (When using flash, modify the global variables
+	 * with equivalent names.)
+	 */
+	u32 hi_bank0_addr_value;                       /* 0x44 */
+	u32 hi_bank0_read_value;                       /* 0x48 */
+	u32 hi_bank0_write_value;                      /* 0x4c */
+	u32 hi_bank0_config_value;                     /* 0x50 */
+
+	/* Pointer to Board Data  */
+	u32 hi_board_data;                             /* 0x54 */
+	u32 hi_board_data_initialized;                 /* 0x58 */
+
+	u32 hi_dset_ram_index_tbl;                     /* 0x5c */
+
+	u32 hi_desired_baud_rate;                      /* 0x60 */
+	u32 hi_dbglog_config;                          /* 0x64 */
+	u32 hi_end_ram_reserve_sz;                     /* 0x68 */
+	u32 hi_mbox_io_block_sz;                       /* 0x6c */
+
+	u32 hi_num_bpatch_streams;                     /* 0x70 -- unused */
+	u32 hi_mbox_isr_yield_limit;                   /* 0x74 */
+
+	u32 hi_refclk_hz;                              /* 0x78 */
+	u32 hi_ext_clk_detected;                       /* 0x7c */
+	u32 hi_dbg_uart_txpin;                         /* 0x80 */
+	u32 hi_dbg_uart_rxpin;                         /* 0x84 */
+	u32 hi_hci_uart_baud;                          /* 0x88 */
+	u32 hi_hci_uart_pin_assignments;               /* 0x8C */
+	/*
+	 * NOTE: byte [0] = tx pin, [1] = rx pin, [2] = rts pin, [3] = cts
+	 * pin
+	 */
+	u32 hi_hci_uart_baud_scale_val;                /* 0x90 */
+	u32 hi_hci_uart_baud_step_val;                 /* 0x94 */
+
+	u32 hi_allocram_start;                         /* 0x98 */
+	u32 hi_allocram_sz;                            /* 0x9c */
+	u32 hi_hci_bridge_flags;                       /* 0xa0 */
+	u32 hi_hci_uart_support_pins;                  /* 0xa4 */
+	/*
+	 * NOTE: byte [0] = RESET pin (bit 7 is polarity),
+	 * bytes[1]..bytes[3] are for future use
+	 */
+	u32 hi_hci_uart_pwr_mgmt_params;               /* 0xa8 */
+	/*
+	 * 0xa8   - [1]: 0 = UART FC active low, 1 = UART FC active high
+	 *      [31:16]: wakeup timeout in ms
+	 */
+
+	/* Pointer to extended board data */
+	u32 hi_board_ext_data;                /* 0xac */
+	u32 hi_board_ext_data_config;         /* 0xb0 */
+
+	/*
+	 * Bit [0]  :   valid
+	 * Bit[31:16:   size
+	 */
+	/*
+	 * hi_reset_flag is used to do some stuff when target reset.
+	 * such as restore app_start after warm reset or
+	 * preserve host Interest area, or preserve ROM data, literals etc.
+	 */
+	u32 hi_reset_flag;                            /* 0xb4 */
+	/* indicate hi_reset_flag is valid */
+	u32 hi_reset_flag_valid;                      /* 0xb8 */
+	u32 hi_hci_uart_pwr_mgmt_params_ext;           /* 0xbc */
+	/*
+	 * 0xbc - [31:0]: idle timeout in ms
+	 */
+	/* ACS flags */
+	u32 hi_acs_flags;                              /* 0xc0 */
+	u32 hi_console_flags;                          /* 0xc4 */
+	u32 hi_nvram_state;                            /* 0xc8 */
+	u32 hi_option_flag2;                           /* 0xcc */
+
+	/* If non-zero, override values sent to Host in WMI_READY event. */
+	u32 hi_sw_version_override;                    /* 0xd0 */
+	u32 hi_abi_version_override;                   /* 0xd4 */
+
+	/*
+	 * Percentage of high priority RX traffic to total expected RX traffic -
+	 * applicable only to ar6004
+	 */
+	u32 hi_hp_rx_traffic_ratio;                    /* 0xd8 */
+
+	/* test applications flags */
+	u32 hi_test_apps_related;                      /* 0xdc */
+	/* location of test script */
+	u32 hi_ota_testscript;                         /* 0xe0 */
+	/* location of CAL data */
+	u32 hi_cal_data;                               /* 0xe4 */
+	/* Number of packet log buffers */
+	u32 hi_pktlog_num_buffers;                     /* 0xe8 */
+
+} __packed;
+
+#define HI_ITEM(item)  offsetof(struct host_interest, item)
+
+#define HI_OPTION_MAC_ADDR_METHOD_SHIFT	3
+
+#define HI_OPTION_FW_MODE_IBSS    0x0
+#define HI_OPTION_FW_MODE_BSS_STA 0x1
+#define HI_OPTION_FW_MODE_AP      0x2
+
+#define HI_OPTION_FW_SUBMODE_NONE      0x0
+#define HI_OPTION_FW_SUBMODE_P2PDEV    0x1
+#define HI_OPTION_FW_SUBMODE_P2PCLIENT 0x2
+#define HI_OPTION_FW_SUBMODE_P2PGO     0x3
+
+#define HI_OPTION_NUM_DEV_SHIFT   0x9
+
+#define HI_OPTION_FW_BRIDGE_SHIFT 0x04
+
+/* Fw Mode/SubMode Mask
+|------------------------------------------------------------------------------|
+|   SUB   |   SUB   |   SUB   |  SUB    |         |         |         |
+| MODE[3] | MODE[2] | MODE[1] | MODE[0] | MODE[3] | MODE[2] | MODE[1] | MODE[0|
+|   (2)   |   (2)   |   (2)   |   (2)   |   (2)   |   (2)   |   (2)   |   (2)
+|------------------------------------------------------------------------------|
+*/
+#define HI_OPTION_FW_MODE_BITS	       0x2
+#define HI_OPTION_FW_MODE_SHIFT        0xC
+
+#define HI_OPTION_FW_SUBMODE_BITS      0x2
+#define HI_OPTION_FW_SUBMODE_SHIFT     0x14
+
+/* Convert a Target virtual address into a Target physical address */
+#define AR6003_VTOP(vaddr) ((vaddr) & 0x001fffff)
+#define AR6004_VTOP(vaddr) (vaddr)
+
+#define TARG_VTOP(target_type, vaddr) \
+	(((target_type) == TARGET_TYPE_AR6003) ? AR6003_VTOP(vaddr) : \
+	(((target_type) == TARGET_TYPE_AR6004) ? AR6004_VTOP(vaddr) : 0))
+
+#define ATH6KL_FWLOG_PAYLOAD_SIZE		1500
+
+struct ath6kl_dbglog_buf {
+	__le32 next;
+	__le32 buffer_addr;
+	__le32 bufsize;
+	__le32 length;
+	__le32 count;
+	__le32 free;
+} __packed;
+
+struct ath6kl_dbglog_hdr {
+	__le32 dbuf_addr;
+	__le32 dropped;
+} __packed;
+
+#endif