Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 575 insertions, 0 deletions

diff --git a/drivers/net/wireless/intel/iwlegacy/3945.h b/drivers/net/wireless/intel/iwlegacy/3945.h
new file mode 100644
index 000000000..82e4a4878
--- /dev/null
+++ b/drivers/net/wireless/intel/iwlegacy/3945.h
@@ -0,0 +1,575 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/******************************************************************************
+ *
+ * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+
+#ifndef __il_3945_h__
+#define __il_3945_h__
+
+#include <linux/pci.h>		/* for struct pci_device_id */
+#include <linux/kernel.h>
+#include <net/ieee80211_radiotap.h>
+
+/* Hardware specific file defines the PCI IDs table for that hardware module */
+extern const struct pci_device_id il3945_hw_card_ids[];
+
+#include "common.h"
+
+extern const struct il_ops il3945_ops;
+
+/* Highest firmware API version supported */
+#define IL3945_UCODE_API_MAX 2
+
+/* Lowest firmware API version supported */
+#define IL3945_UCODE_API_MIN 1
+
+#define IL3945_FW_PRE	"iwlwifi-3945-"
+#define _IL3945_MODULE_FIRMWARE(api) IL3945_FW_PRE #api ".ucode"
+#define IL3945_MODULE_FIRMWARE(api) _IL3945_MODULE_FIRMWARE(api)
+
+/* Default noise level to report when noise measurement is not available.
+ *   This may be because we're:
+ *   1)  Not associated (4965, no beacon stats being sent to driver)
+ *   2)  Scanning (noise measurement does not apply to associated channel)
+ *   3)  Receiving CCK (3945 delivers noise info only for OFDM frames)
+ * Use default noise value of -127 ... this is below the range of measurable
+ *   Rx dBm for either 3945 or 4965, so it can indicate "unmeasurable" to user.
+ *   Also, -127 works better than 0 when averaging frames with/without
+ *   noise info (e.g. averaging might be done in app); measured dBm values are
+ *   always negative ... using a negative value as the default keeps all
+ *   averages within an s8's (used in some apps) range of negative values. */
+#define IL_NOISE_MEAS_NOT_AVAILABLE (-127)
+
+/* Module parameters accessible from iwl-*.c */
+extern struct il_mod_params il3945_mod_params;
+
+struct il3945_rate_scale_data {
+	u64 data;
+	s32 success_counter;
+	s32 success_ratio;
+	s32 counter;
+	s32 average_tpt;
+	unsigned long stamp;
+};
+
+struct il3945_rs_sta {
+	spinlock_t lock;
+	struct il_priv *il;
+	s32 *expected_tpt;
+	unsigned long last_partial_flush;
+	unsigned long last_flush;
+	u32 flush_time;
+	u32 last_tx_packets;
+	u32 tx_packets;
+	u8 tgg;
+	u8 flush_pending;
+	u8 start_rate;
+	struct timer_list rate_scale_flush;
+	struct il3945_rate_scale_data win[RATE_COUNT_3945];
+
+	/* used to be in sta_info */
+	int last_txrate_idx;
+};
+
+/*
+ * The common struct MUST be first because it is shared between
+ * 3945 and 4965!
+ */
+struct il3945_sta_priv {
+	struct il_station_priv_common common;
+	struct il3945_rs_sta rs_sta;
+};
+
+enum il3945_antenna {
+	IL_ANTENNA_DIVERSITY,
+	IL_ANTENNA_MAIN,
+	IL_ANTENNA_AUX
+};
+
+/*
+ * RTS threshold here is total size [2347] minus 4 FCS bytes
+ * Per spec:
+ *   a value of 0 means RTS on all data/management packets
+ *   a value > max MSDU size means no RTS
+ * else RTS for data/management frames where MPDU is larger
+ *   than RTS value.
+ */
+#define DEFAULT_RTS_THRESHOLD     2347U
+#define MIN_RTS_THRESHOLD         0U
+#define MAX_RTS_THRESHOLD         2347U
+#define MAX_MSDU_SIZE		  2304U
+#define MAX_MPDU_SIZE		  2346U
+#define DEFAULT_BEACON_INTERVAL   100U
+#define	DEFAULT_SHORT_RETRY_LIMIT 7U
+#define	DEFAULT_LONG_RETRY_LIMIT  4U
+
+#define IL_TX_FIFO_AC0	0
+#define IL_TX_FIFO_AC1	1
+#define IL_TX_FIFO_AC2	2
+#define IL_TX_FIFO_AC3	3
+#define IL_TX_FIFO_HCCA_1	5
+#define IL_TX_FIFO_HCCA_2	6
+#define IL_TX_FIFO_NONE	7
+
+#define IEEE80211_DATA_LEN              2304
+#define IEEE80211_4ADDR_LEN             30
+#define IEEE80211_HLEN                  (IEEE80211_4ADDR_LEN)
+#define IEEE80211_FRAME_LEN             (IEEE80211_DATA_LEN + IEEE80211_HLEN)
+
+struct il3945_frame {
+	union {
+		struct ieee80211_hdr frame;
+		struct il3945_tx_beacon_cmd beacon;
+		u8 raw[IEEE80211_FRAME_LEN];
+		u8 cmd[360];
+	} u;
+	struct list_head list;
+};
+
+#define SUP_RATE_11A_MAX_NUM_CHANNELS  8
+#define SUP_RATE_11B_MAX_NUM_CHANNELS  4
+#define SUP_RATE_11G_MAX_NUM_CHANNELS  12
+
+#define IL_SUPPORTED_RATES_IE_LEN         8
+
+#define SCAN_INTERVAL 100
+
+#define MAX_TID_COUNT        9
+
+#define IL_INVALID_RATE     0xFF
+#define IL_INVALID_VALUE    -1
+
+#define STA_PS_STATUS_WAKE             0
+#define STA_PS_STATUS_SLEEP            1
+
+struct il3945_ibss_seq {
+	u8 mac[ETH_ALEN];
+	u16 seq_num;
+	u16 frag_num;
+	unsigned long packet_time;
+	struct list_head list;
+};
+
+#define IL_RX_HDR(x) ((struct il3945_rx_frame_hdr *)(\
+		       x->u.rx_frame.stats.payload + \
+		       x->u.rx_frame.stats.phy_count))
+#define IL_RX_END(x) ((struct il3945_rx_frame_end *)(\
+		       IL_RX_HDR(x)->payload + \
+		       le16_to_cpu(IL_RX_HDR(x)->len)))
+#define IL_RX_STATS(x) (&x->u.rx_frame.stats)
+#define IL_RX_DATA(x) (IL_RX_HDR(x)->payload)
+
+/******************************************************************************
+ *
+ * Functions implemented in iwl3945-base.c which are forward declared here
+ * for use by iwl-*.c
+ *
+ *****************************************************************************/
+int il3945_calc_db_from_ratio(int sig_ratio);
+void il3945_rx_replenish(void *data);
+void il3945_rx_queue_reset(struct il_priv *il, struct il_rx_queue *rxq);
+unsigned int il3945_fill_beacon_frame(struct il_priv *il,
+				      struct ieee80211_hdr *hdr, int left);
+int il3945_dump_nic_event_log(struct il_priv *il, bool full_log, char **buf,
+			      bool display);
+void il3945_dump_nic_error_log(struct il_priv *il);
+
+/******************************************************************************
+ *
+ * Functions implemented in iwl-[34]*.c which are forward declared here
+ * for use by iwl3945-base.c
+ *
+ * NOTE:  The implementation of these functions are hardware specific
+ * which is why they are in the hardware specific files (vs. iwl-base.c)
+ *
+ * Naming convention --
+ * il3945_         <-- Its part of iwlwifi (should be changed to il3945_)
+ * il3945_hw_      <-- Hardware specific (implemented in iwl-XXXX.c by all HW)
+ * iwlXXXX_     <-- Hardware specific (implemented in iwl-XXXX.c for XXXX)
+ * il3945_bg_      <-- Called from work queue context
+ * il3945_mac_     <-- mac80211 callback
+ *
+ ****************************************************************************/
+void il3945_hw_handler_setup(struct il_priv *il);
+void il3945_hw_setup_deferred_work(struct il_priv *il);
+void il3945_hw_cancel_deferred_work(struct il_priv *il);
+int il3945_hw_rxq_stop(struct il_priv *il);
+int il3945_hw_set_hw_params(struct il_priv *il);
+int il3945_hw_nic_init(struct il_priv *il);
+int il3945_hw_nic_stop_master(struct il_priv *il);
+void il3945_hw_txq_ctx_free(struct il_priv *il);
+void il3945_hw_txq_ctx_stop(struct il_priv *il);
+int il3945_hw_nic_reset(struct il_priv *il);
+int il3945_hw_txq_attach_buf_to_tfd(struct il_priv *il, struct il_tx_queue *txq,
+				    dma_addr_t addr, u16 len, u8 reset, u8 pad);
+void il3945_hw_txq_free_tfd(struct il_priv *il, struct il_tx_queue *txq);
+int il3945_hw_get_temperature(struct il_priv *il);
+int il3945_hw_tx_queue_init(struct il_priv *il, struct il_tx_queue *txq);
+unsigned int il3945_hw_get_beacon_cmd(struct il_priv *il,
+				      struct il3945_frame *frame, u8 rate);
+void il3945_hw_build_tx_cmd_rate(struct il_priv *il, struct il_device_cmd *cmd,
+				 struct ieee80211_tx_info *info,
+				 struct ieee80211_hdr *hdr, int sta_id);
+int il3945_hw_reg_send_txpower(struct il_priv *il);
+int il3945_hw_reg_set_txpower(struct il_priv *il, s8 power);
+void il3945_hdl_stats(struct il_priv *il, struct il_rx_buf *rxb);
+void il3945_hdl_c_stats(struct il_priv *il, struct il_rx_buf *rxb);
+void il3945_disable_events(struct il_priv *il);
+int il4965_get_temperature(const struct il_priv *il);
+void il3945_post_associate(struct il_priv *il);
+void il3945_config_ap(struct il_priv *il);
+
+int il3945_commit_rxon(struct il_priv *il);
+
+/**
+ * il3945_hw_find_station - Find station id for a given BSSID
+ * @bssid: MAC address of station ID to find
+ *
+ * NOTE:  This should not be hardware specific but the code has
+ * not yet been merged into a single common layer for managing the
+ * station tables.
+ */
+u8 il3945_hw_find_station(struct il_priv *il, const u8 *bssid);
+
+__le32 il3945_get_antenna_flags(const struct il_priv *il);
+int il3945_init_hw_rate_table(struct il_priv *il);
+void il3945_reg_txpower_periodic(struct il_priv *il);
+int il3945_txpower_set_from_eeprom(struct il_priv *il);
+
+int il3945_rs_next_rate(struct il_priv *il, int rate);
+
+/* scanning */
+int il3945_request_scan(struct il_priv *il, struct ieee80211_vif *vif);
+void il3945_post_scan(struct il_priv *il);
+
+/* rates */
+extern const struct il3945_rate_info il3945_rates[RATE_COUNT_3945];
+
+/* RSSI to dBm */
+#define IL39_RSSI_OFFSET	95
+
+/*
+ * EEPROM related constants, enums, and structures.
+ */
+#define EEPROM_SKU_CAP_OP_MODE_MRC                      (1 << 7)
+
+/*
+ * Mapping of a Tx power level, at factory calibration temperature,
+ *   to a radio/DSP gain table idx.
+ * One for each of 5 "sample" power levels in each band.
+ * v_det is measured at the factory, using the 3945's built-in power amplifier
+ *   (PA) output voltage detector.  This same detector is used during Tx of
+ *   long packets in normal operation to provide feedback as to proper output
+ *   level.
+ * Data copied from EEPROM.
+ * DO NOT ALTER THIS STRUCTURE!!!
+ */
+struct il3945_eeprom_txpower_sample {
+	u8 gain_idx;		/* idx into power (gain) setup table ... */
+	s8 power;		/* ... for this pwr level for this chnl group */
+	u16 v_det;		/* PA output voltage */
+} __packed;
+
+/*
+ * Mappings of Tx power levels -> nominal radio/DSP gain table idxes.
+ * One for each channel group (a.k.a. "band") (1 for BG, 4 for A).
+ * Tx power setup code interpolates between the 5 "sample" power levels
+ *    to determine the nominal setup for a requested power level.
+ * Data copied from EEPROM.
+ * DO NOT ALTER THIS STRUCTURE!!!
+ */
+struct il3945_eeprom_txpower_group {
+	struct il3945_eeprom_txpower_sample samples[5];	/* 5 power levels */
+	s32 a, b, c, d, e;	/* coefficients for voltage->power
+				 * formula (signed) */
+	s32 Fa, Fb, Fc, Fd, Fe;	/* these modify coeffs based on
+				 * frequency (signed) */
+	s8 saturation_power;	/* highest power possible by h/w in this
+				 * band */
+	u8 group_channel;	/* "representative" channel # in this band */
+	s16 temperature;	/* h/w temperature at factory calib this band
+				 * (signed) */
+} __packed;
+
+/*
+ * Temperature-based Tx-power compensation data, not band-specific.
+ * These coefficients are use to modify a/b/c/d/e coeffs based on
+ *   difference between current temperature and factory calib temperature.
+ * Data copied from EEPROM.
+ */
+struct il3945_eeprom_temperature_corr {
+	u32 Ta;
+	u32 Tb;
+	u32 Tc;
+	u32 Td;
+	u32 Te;
+} __packed;
+
+/*
+ * EEPROM map
+ */
+struct il3945_eeprom {
+	u8 reserved0[16];
+	u16 device_id;		/* abs.ofs: 16 */
+	u8 reserved1[2];
+	u16 pmc;		/* abs.ofs: 20 */
+	u8 reserved2[20];
+	u8 mac_address[6];	/* abs.ofs: 42 */
+	u8 reserved3[58];
+	u16 board_revision;	/* abs.ofs: 106 */
+	u8 reserved4[11];
+	u8 board_pba_number[9];	/* abs.ofs: 119 */
+	u8 reserved5[8];
+	u16 version;		/* abs.ofs: 136 */
+	u8 sku_cap;		/* abs.ofs: 138 */
+	u8 leds_mode;		/* abs.ofs: 139 */
+	u16 oem_mode;
+	u16 wowlan_mode;	/* abs.ofs: 142 */
+	u16 leds_time_interval;	/* abs.ofs: 144 */
+	u8 leds_off_time;	/* abs.ofs: 146 */
+	u8 leds_on_time;	/* abs.ofs: 147 */
+	u8 almgor_m_version;	/* abs.ofs: 148 */
+	u8 antenna_switch_type;	/* abs.ofs: 149 */
+	u8 reserved6[42];
+	u8 sku_id[4];		/* abs.ofs: 192 */
+
+/*
+ * Per-channel regulatory data.
+ *
+ * Each channel that *might* be supported by 3945 has a fixed location
+ * in EEPROM containing EEPROM_CHANNEL_* usage flags (LSB) and max regulatory
+ * txpower (MSB).
+ *
+ * Entries immediately below are for 20 MHz channel width.
+ *
+ * 2.4 GHz channels 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14
+ */
+	u16 band_1_count;	/* abs.ofs: 196 */
+	struct il_eeprom_channel band_1_channels[14];	/* abs.ofs: 198 */
+
+/*
+ * 4.9 GHz channels 183, 184, 185, 187, 188, 189, 192, 196,
+ * 5.0 GHz channels 7, 8, 11, 12, 16
+ * (4915-5080MHz) (none of these is ever supported)
+ */
+	u16 band_2_count;	/* abs.ofs: 226 */
+	struct il_eeprom_channel band_2_channels[13];	/* abs.ofs: 228 */
+
+/*
+ * 5.2 GHz channels 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64
+ * (5170-5320MHz)
+ */
+	u16 band_3_count;	/* abs.ofs: 254 */
+	struct il_eeprom_channel band_3_channels[12];	/* abs.ofs: 256 */
+
+/*
+ * 5.5 GHz channels 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
+ * (5500-5700MHz)
+ */
+	u16 band_4_count;	/* abs.ofs: 280 */
+	struct il_eeprom_channel band_4_channels[11];	/* abs.ofs: 282 */
+
+/*
+ * 5.7 GHz channels 145, 149, 153, 157, 161, 165
+ * (5725-5825MHz)
+ */
+	u16 band_5_count;	/* abs.ofs: 304 */
+	struct il_eeprom_channel band_5_channels[6];	/* abs.ofs: 306 */
+
+	u8 reserved9[194];
+
+/*
+ * 3945 Txpower calibration data.
+ */
+#define IL_NUM_TX_CALIB_GROUPS 5
+	struct il3945_eeprom_txpower_group groups[IL_NUM_TX_CALIB_GROUPS];
+/* abs.ofs: 512 */
+	struct il3945_eeprom_temperature_corr corrections;	/* abs.ofs: 832 */
+	u8 reserved16[172];	/* fill out to full 1024 byte block */
+} __packed;
+
+#define IL3945_EEPROM_IMG_SIZE 1024
+
+/* End of EEPROM */
+
+#define PCI_CFG_REV_ID_BIT_BASIC_SKU                (0x40)	/* bit 6    */
+#define PCI_CFG_REV_ID_BIT_RTP                      (0x80)	/* bit 7    */
+
+/* 4 DATA + 1 CMD. There are 2 HCCA queues that are not used. */
+#define IL39_NUM_QUEUES        5
+#define IL39_CMD_QUEUE_NUM	4
+
+#define IL_DEFAULT_TX_RETRY  15
+
+/*********************************************/
+
+#define RFD_SIZE                              4
+#define NUM_TFD_CHUNKS                        4
+
+#define TFD_CTL_COUNT_SET(n)       (n << 24)
+#define TFD_CTL_COUNT_GET(ctl)     ((ctl >> 24) & 7)
+#define TFD_CTL_PAD_SET(n)         (n << 28)
+#define TFD_CTL_PAD_GET(ctl)       (ctl >> 28)
+
+/* Sizes and addresses for instruction and data memory (SRAM) in
+ * 3945's embedded processor.  Driver access is via HBUS_TARG_MEM_* regs. */
+#define IL39_RTC_INST_LOWER_BOUND		(0x000000)
+#define IL39_RTC_INST_UPPER_BOUND		(0x014000)
+
+#define IL39_RTC_DATA_LOWER_BOUND		(0x800000)
+#define IL39_RTC_DATA_UPPER_BOUND		(0x808000)
+
+#define IL39_RTC_INST_SIZE (IL39_RTC_INST_UPPER_BOUND - \
+				IL39_RTC_INST_LOWER_BOUND)
+#define IL39_RTC_DATA_SIZE (IL39_RTC_DATA_UPPER_BOUND - \
+				IL39_RTC_DATA_LOWER_BOUND)
+
+#define IL39_MAX_INST_SIZE IL39_RTC_INST_SIZE
+#define IL39_MAX_DATA_SIZE IL39_RTC_DATA_SIZE
+
+/* Size of uCode instruction memory in bootstrap state machine */
+#define IL39_MAX_BSM_SIZE IL39_RTC_INST_SIZE
+
+static inline int
+il3945_hw_valid_rtc_data_addr(u32 addr)
+{
+	return (addr >= IL39_RTC_DATA_LOWER_BOUND &&
+		addr < IL39_RTC_DATA_UPPER_BOUND);
+}
+
+/* Base physical address of il3945_shared is provided to FH39_TSSR_CBB_BASE
+ * and &il3945_shared.rx_read_ptr[0] is provided to FH39_RCSR_RPTR_ADDR(0) */
+struct il3945_shared {
+	__le32 tx_base_ptr[8];
+} __packed;
+
+/************************************/
+/* iwl3945 Flow Handler Definitions */
+/************************************/
+
+/**
+ * This I/O area is directly read/writable by driver (e.g. Linux uses writel())
+ * Addresses are offsets from device's PCI hardware base address.
+ */
+#define FH39_MEM_LOWER_BOUND                   (0x0800)
+#define FH39_MEM_UPPER_BOUND                   (0x1000)
+
+#define FH39_CBCC_TBL		(FH39_MEM_LOWER_BOUND + 0x140)
+#define FH39_TFDB_TBL		(FH39_MEM_LOWER_BOUND + 0x180)
+#define FH39_RCSR_TBL		(FH39_MEM_LOWER_BOUND + 0x400)
+#define FH39_RSSR_TBL		(FH39_MEM_LOWER_BOUND + 0x4c0)
+#define FH39_TCSR_TBL		(FH39_MEM_LOWER_BOUND + 0x500)
+#define FH39_TSSR_TBL		(FH39_MEM_LOWER_BOUND + 0x680)
+
+/* TFDB (Transmit Frame Buffer Descriptor) */
+#define FH39_TFDB(_ch, buf)			(FH39_TFDB_TBL + \
+						 ((_ch) * 2 + (buf)) * 0x28)
+#define FH39_TFDB_CHNL_BUF_CTRL_REG(_ch)	(FH39_TFDB_TBL + 0x50 * (_ch))
+
+/* CBCC channel is [0,2] */
+#define FH39_CBCC(_ch)		(FH39_CBCC_TBL + (_ch) * 0x8)
+#define FH39_CBCC_CTRL(_ch)	(FH39_CBCC(_ch) + 0x00)
+#define FH39_CBCC_BASE(_ch)	(FH39_CBCC(_ch) + 0x04)
+
+/* RCSR channel is [0,2] */
+#define FH39_RCSR(_ch)			(FH39_RCSR_TBL + (_ch) * 0x40)
+#define FH39_RCSR_CONFIG(_ch)		(FH39_RCSR(_ch) + 0x00)
+#define FH39_RCSR_RBD_BASE(_ch)		(FH39_RCSR(_ch) + 0x04)
+#define FH39_RCSR_WPTR(_ch)		(FH39_RCSR(_ch) + 0x20)
+#define FH39_RCSR_RPTR_ADDR(_ch)	(FH39_RCSR(_ch) + 0x24)
+
+#define FH39_RSCSR_CHNL0_WPTR		(FH39_RCSR_WPTR(0))
+
+/* RSSR */
+#define FH39_RSSR_CTRL			(FH39_RSSR_TBL + 0x000)
+#define FH39_RSSR_STATUS		(FH39_RSSR_TBL + 0x004)
+
+/* TCSR */
+#define FH39_TCSR(_ch)			(FH39_TCSR_TBL + (_ch) * 0x20)
+#define FH39_TCSR_CONFIG(_ch)		(FH39_TCSR(_ch) + 0x00)
+#define FH39_TCSR_CREDIT(_ch)		(FH39_TCSR(_ch) + 0x04)
+#define FH39_TCSR_BUFF_STTS(_ch)	(FH39_TCSR(_ch) + 0x08)
+
+/* TSSR */
+#define FH39_TSSR_CBB_BASE        (FH39_TSSR_TBL + 0x000)
+#define FH39_TSSR_MSG_CONFIG      (FH39_TSSR_TBL + 0x008)
+#define FH39_TSSR_TX_STATUS       (FH39_TSSR_TBL + 0x010)
+
+/* DBM */
+
+#define FH39_SRVC_CHNL                            (6)
+
+#define FH39_RCSR_RX_CONFIG_REG_POS_RBDC_SIZE     (20)
+#define FH39_RCSR_RX_CONFIG_REG_POS_IRQ_RBTH      (4)
+
+#define FH39_RCSR_RX_CONFIG_REG_BIT_WR_STTS_EN    (0x08000000)
+
+#define FH39_RCSR_RX_CONFIG_REG_VAL_DMA_CHNL_EN_ENABLE        (0x80000000)
+
+#define FH39_RCSR_RX_CONFIG_REG_VAL_RDRBD_EN_ENABLE           (0x20000000)
+
+#define FH39_RCSR_RX_CONFIG_REG_VAL_MAX_FRAG_SIZE_128		(0x01000000)
+
+#define FH39_RCSR_RX_CONFIG_REG_VAL_IRQ_DEST_INT_HOST		(0x00001000)
+
+#define FH39_RCSR_RX_CONFIG_REG_VAL_MSG_MODE_FH			(0x00000000)
+
+#define FH39_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_TXF		(0x00000000)
+#define FH39_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_DRIVER		(0x00000001)
+
+#define FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_DISABLE_VAL	(0x00000000)
+#define FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL	(0x00000008)
+
+#define FH39_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_IFTFD		(0x00200000)
+
+#define FH39_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_NOINT		(0x00000000)
+
+#define FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_PAUSE		(0x00000000)
+#define FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE		(0x80000000)
+
+#define FH39_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_VALID		(0x00004000)
+
+#define FH39_TCSR_CHNL_TX_BUF_STS_REG_BIT_TFDB_WPTR		(0x00000001)
+
+#define FH39_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TXPD_ON	(0xFF000000)
+#define FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_TXPD_ON	(0x00FF0000)
+
+#define FH39_TSSR_TX_MSG_CONFIG_REG_VAL_MAX_FRAG_SIZE_128B	(0x00000400)
+
+#define FH39_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TFD_ON		(0x00000100)
+#define FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_CBB_ON		(0x00000080)
+
+#define FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RSP_WAIT_TH	(0x00000020)
+#define FH39_TSSR_TX_MSG_CONFIG_REG_VAL_RSP_WAIT_TH		(0x00000005)
+
+#define FH39_TSSR_TX_STATUS_REG_BIT_BUFS_EMPTY(_ch)	(BIT(_ch) << 24)
+#define FH39_TSSR_TX_STATUS_REG_BIT_NO_PEND_REQ(_ch)	(BIT(_ch) << 16)
+
+#define FH39_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(_ch) \
+	(FH39_TSSR_TX_STATUS_REG_BIT_BUFS_EMPTY(_ch) | \
+	 FH39_TSSR_TX_STATUS_REG_BIT_NO_PEND_REQ(_ch))
+
+#define FH39_RSSR_CHNL0_RX_STATUS_CHNL_IDLE			(0x01000000)
+
+struct il3945_tfd_tb {
+	__le32 addr;
+	__le32 len;
+} __packed;
+
+struct il3945_tfd {
+	__le32 control_flags;
+	struct il3945_tfd_tb tbs[4];
+	u8 __pad[28];
+} __packed;
+
+#ifdef CONFIG_IWLEGACY_DEBUGFS
+extern const struct il_debugfs_ops il3945_debugfs_ops;
+#endif
+
+#endif