Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1793 insertions, 0 deletions

diff --git a/drivers/power/supply/bq2415x_charger.c b/drivers/power/supply/bq2415x_charger.c
new file mode 100644
index 000000000..5724001e6
--- /dev/null
+++ b/drivers/power/supply/bq2415x_charger.c
@@ -0,0 +1,1793 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * bq2415x charger driver
+ *
+ * Copyright (C) 2011-2013  Pali Rohár <pali@kernel.org>
+ *
+ * Datasheets:
+ * https://www.ti.com/product/bq24150
+ * https://www.ti.com/product/bq24150a
+ * https://www.ti.com/product/bq24152
+ * https://www.ti.com/product/bq24153
+ * https://www.ti.com/product/bq24153a
+ * https://www.ti.com/product/bq24155
+ * https://www.ti.com/product/bq24157s
+ * https://www.ti.com/product/bq24158
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/param.h>
+#include <linux/err.h>
+#include <linux/workqueue.h>
+#include <linux/sysfs.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/idr.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/acpi.h>
+
+#include <linux/power/bq2415x_charger.h>
+
+/* timeout for resetting chip timer */
+#define BQ2415X_TIMER_TIMEOUT		10
+
+#define BQ2415X_REG_STATUS		0x00
+#define BQ2415X_REG_CONTROL		0x01
+#define BQ2415X_REG_VOLTAGE		0x02
+#define BQ2415X_REG_VENDER		0x03
+#define BQ2415X_REG_CURRENT		0x04
+
+/* reset state for all registers */
+#define BQ2415X_RESET_STATUS		BIT(6)
+#define BQ2415X_RESET_CONTROL		(BIT(4)|BIT(5))
+#define BQ2415X_RESET_VOLTAGE		(BIT(1)|BIT(3))
+#define BQ2415X_RESET_CURRENT		(BIT(0)|BIT(3)|BIT(7))
+
+/* status register */
+#define BQ2415X_BIT_TMR_RST		7
+#define BQ2415X_BIT_OTG			7
+#define BQ2415X_BIT_EN_STAT		6
+#define BQ2415X_MASK_STAT		(BIT(4)|BIT(5))
+#define BQ2415X_SHIFT_STAT		4
+#define BQ2415X_BIT_BOOST		3
+#define BQ2415X_MASK_FAULT		(BIT(0)|BIT(1)|BIT(2))
+#define BQ2415X_SHIFT_FAULT		0
+
+/* control register */
+#define BQ2415X_MASK_LIMIT		(BIT(6)|BIT(7))
+#define BQ2415X_SHIFT_LIMIT		6
+#define BQ2415X_MASK_VLOWV		(BIT(4)|BIT(5))
+#define BQ2415X_SHIFT_VLOWV		4
+#define BQ2415X_BIT_TE			3
+#define BQ2415X_BIT_CE			2
+#define BQ2415X_BIT_HZ_MODE		1
+#define BQ2415X_BIT_OPA_MODE		0
+
+/* voltage register */
+#define BQ2415X_MASK_VO		(BIT(2)|BIT(3)|BIT(4)|BIT(5)|BIT(6)|BIT(7))
+#define BQ2415X_SHIFT_VO		2
+#define BQ2415X_BIT_OTG_PL		1
+#define BQ2415X_BIT_OTG_EN		0
+
+/* vender register */
+#define BQ2415X_MASK_VENDER		(BIT(5)|BIT(6)|BIT(7))
+#define BQ2415X_SHIFT_VENDER		5
+#define BQ2415X_MASK_PN			(BIT(3)|BIT(4))
+#define BQ2415X_SHIFT_PN		3
+#define BQ2415X_MASK_REVISION		(BIT(0)|BIT(1)|BIT(2))
+#define BQ2415X_SHIFT_REVISION		0
+
+/* current register */
+#define BQ2415X_MASK_RESET		BIT(7)
+#define BQ2415X_MASK_VI_CHRG		(BIT(4)|BIT(5)|BIT(6))
+#define BQ2415X_SHIFT_VI_CHRG		4
+/* N/A					BIT(3) */
+#define BQ2415X_MASK_VI_TERM		(BIT(0)|BIT(1)|BIT(2))
+#define BQ2415X_SHIFT_VI_TERM		0
+
+
+enum bq2415x_command {
+	BQ2415X_TIMER_RESET,
+	BQ2415X_OTG_STATUS,
+	BQ2415X_STAT_PIN_STATUS,
+	BQ2415X_STAT_PIN_ENABLE,
+	BQ2415X_STAT_PIN_DISABLE,
+	BQ2415X_CHARGE_STATUS,
+	BQ2415X_BOOST_STATUS,
+	BQ2415X_FAULT_STATUS,
+
+	BQ2415X_CHARGE_TERMINATION_STATUS,
+	BQ2415X_CHARGE_TERMINATION_ENABLE,
+	BQ2415X_CHARGE_TERMINATION_DISABLE,
+	BQ2415X_CHARGER_STATUS,
+	BQ2415X_CHARGER_ENABLE,
+	BQ2415X_CHARGER_DISABLE,
+	BQ2415X_HIGH_IMPEDANCE_STATUS,
+	BQ2415X_HIGH_IMPEDANCE_ENABLE,
+	BQ2415X_HIGH_IMPEDANCE_DISABLE,
+	BQ2415X_BOOST_MODE_STATUS,
+	BQ2415X_BOOST_MODE_ENABLE,
+	BQ2415X_BOOST_MODE_DISABLE,
+
+	BQ2415X_OTG_LEVEL,
+	BQ2415X_OTG_ACTIVATE_HIGH,
+	BQ2415X_OTG_ACTIVATE_LOW,
+	BQ2415X_OTG_PIN_STATUS,
+	BQ2415X_OTG_PIN_ENABLE,
+	BQ2415X_OTG_PIN_DISABLE,
+
+	BQ2415X_VENDER_CODE,
+	BQ2415X_PART_NUMBER,
+	BQ2415X_REVISION,
+};
+
+enum bq2415x_chip {
+	BQUNKNOWN,
+	BQ24150,
+	BQ24150A,
+	BQ24151,
+	BQ24151A,
+	BQ24152,
+	BQ24153,
+	BQ24153A,
+	BQ24155,
+	BQ24156,
+	BQ24156A,
+	BQ24157S,
+	BQ24158,
+};
+
+static char *bq2415x_chip_name[] = {
+	"unknown",
+	"bq24150",
+	"bq24150a",
+	"bq24151",
+	"bq24151a",
+	"bq24152",
+	"bq24153",
+	"bq24153a",
+	"bq24155",
+	"bq24156",
+	"bq24156a",
+	"bq24157s",
+	"bq24158",
+};
+
+struct bq2415x_device {
+	struct device *dev;
+	struct bq2415x_platform_data init_data;
+	struct power_supply *charger;
+	struct power_supply_desc charger_desc;
+	struct delayed_work work;
+	struct device_node *notify_node;
+	struct notifier_block nb;
+	enum bq2415x_mode reported_mode;/* mode reported by hook function */
+	enum bq2415x_mode mode;		/* currently configured mode */
+	enum bq2415x_chip chip;
+	const char *timer_error;
+	char *model;
+	char *name;
+	int autotimer;	/* 1 - if driver automatically reset timer, 0 - not */
+	int automode;	/* 1 - enabled, 0 - disabled; -1 - not supported */
+	int id;
+};
+
+/* each registered chip must have unique id */
+static DEFINE_IDR(bq2415x_id);
+
+static DEFINE_MUTEX(bq2415x_id_mutex);
+static DEFINE_MUTEX(bq2415x_timer_mutex);
+static DEFINE_MUTEX(bq2415x_i2c_mutex);
+
+/**** i2c read functions ****/
+
+/* read value from register */
+static int bq2415x_i2c_read(struct bq2415x_device *bq, u8 reg)
+{
+	struct i2c_client *client = to_i2c_client(bq->dev);
+	struct i2c_msg msg[2];
+	u8 val;
+	int ret;
+
+	if (!client->adapter)
+		return -ENODEV;
+
+	msg[0].addr = client->addr;
+	msg[0].flags = 0;
+	msg[0].buf = &reg;
+	msg[0].len = sizeof(reg);
+	msg[1].addr = client->addr;
+	msg[1].flags = I2C_M_RD;
+	msg[1].buf = &val;
+	msg[1].len = sizeof(val);
+
+	mutex_lock(&bq2415x_i2c_mutex);
+	ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg));
+	mutex_unlock(&bq2415x_i2c_mutex);
+
+	if (ret < 0)
+		return ret;
+
+	return val;
+}
+
+/* read value from register, apply mask and right shift it */
+static int bq2415x_i2c_read_mask(struct bq2415x_device *bq, u8 reg,
+				 u8 mask, u8 shift)
+{
+	int ret;
+
+	if (shift > 8)
+		return -EINVAL;
+
+	ret = bq2415x_i2c_read(bq, reg);
+	if (ret < 0)
+		return ret;
+	return (ret & mask) >> shift;
+}
+
+/* read value from register and return one specified bit */
+static int bq2415x_i2c_read_bit(struct bq2415x_device *bq, u8 reg, u8 bit)
+{
+	if (bit > 8)
+		return -EINVAL;
+	return bq2415x_i2c_read_mask(bq, reg, BIT(bit), bit);
+}
+
+/**** i2c write functions ****/
+
+/* write value to register */
+static int bq2415x_i2c_write(struct bq2415x_device *bq, u8 reg, u8 val)
+{
+	struct i2c_client *client = to_i2c_client(bq->dev);
+	struct i2c_msg msg[1];
+	u8 data[2];
+	int ret;
+
+	data[0] = reg;
+	data[1] = val;
+
+	msg[0].addr = client->addr;
+	msg[0].flags = 0;
+	msg[0].buf = data;
+	msg[0].len = ARRAY_SIZE(data);
+
+	mutex_lock(&bq2415x_i2c_mutex);
+	ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg));
+	mutex_unlock(&bq2415x_i2c_mutex);
+
+	/* i2c_transfer returns number of messages transferred */
+	if (ret < 0)
+		return ret;
+	else if (ret != 1)
+		return -EIO;
+
+	return 0;
+}
+
+/* read value from register, change it with mask left shifted and write back */
+static int bq2415x_i2c_write_mask(struct bq2415x_device *bq, u8 reg, u8 val,
+				  u8 mask, u8 shift)
+{
+	int ret;
+
+	if (shift > 8)
+		return -EINVAL;
+
+	ret = bq2415x_i2c_read(bq, reg);
+	if (ret < 0)
+		return ret;
+
+	ret &= ~mask;
+	ret |= val << shift;
+
+	return bq2415x_i2c_write(bq, reg, ret);
+}
+
+/* change only one bit in register */
+static int bq2415x_i2c_write_bit(struct bq2415x_device *bq, u8 reg,
+				 bool val, u8 bit)
+{
+	if (bit > 8)
+		return -EINVAL;
+	return bq2415x_i2c_write_mask(bq, reg, val, BIT(bit), bit);
+}
+
+/**** global functions ****/
+
+/* exec command function */
+static int bq2415x_exec_command(struct bq2415x_device *bq,
+				enum bq2415x_command command)
+{
+	int ret;
+
+	switch (command) {
+	case BQ2415X_TIMER_RESET:
+		return bq2415x_i2c_write_bit(bq, BQ2415X_REG_STATUS,
+				1, BQ2415X_BIT_TMR_RST);
+	case BQ2415X_OTG_STATUS:
+		return bq2415x_i2c_read_bit(bq, BQ2415X_REG_STATUS,
+				BQ2415X_BIT_OTG);
+	case BQ2415X_STAT_PIN_STATUS:
+		return bq2415x_i2c_read_bit(bq, BQ2415X_REG_STATUS,
+				BQ2415X_BIT_EN_STAT);
+	case BQ2415X_STAT_PIN_ENABLE:
+		return bq2415x_i2c_write_bit(bq, BQ2415X_REG_STATUS, 1,
+				BQ2415X_BIT_EN_STAT);
+	case BQ2415X_STAT_PIN_DISABLE:
+		return bq2415x_i2c_write_bit(bq, BQ2415X_REG_STATUS, 0,
+				BQ2415X_BIT_EN_STAT);
+	case BQ2415X_CHARGE_STATUS:
+		return bq2415x_i2c_read_mask(bq, BQ2415X_REG_STATUS,
+				BQ2415X_MASK_STAT, BQ2415X_SHIFT_STAT);
+	case BQ2415X_BOOST_STATUS:
+		return bq2415x_i2c_read_bit(bq, BQ2415X_REG_STATUS,
+				BQ2415X_BIT_BOOST);
+	case BQ2415X_FAULT_STATUS:
+		return bq2415x_i2c_read_mask(bq, BQ2415X_REG_STATUS,
+			BQ2415X_MASK_FAULT, BQ2415X_SHIFT_FAULT);
+
+	case BQ2415X_CHARGE_TERMINATION_STATUS:
+		return bq2415x_i2c_read_bit(bq, BQ2415X_REG_CONTROL,
+				BQ2415X_BIT_TE);
+	case BQ2415X_CHARGE_TERMINATION_ENABLE:
+		return bq2415x_i2c_write_bit(bq, BQ2415X_REG_CONTROL,
+				1, BQ2415X_BIT_TE);
+	case BQ2415X_CHARGE_TERMINATION_DISABLE:
+		return bq2415x_i2c_write_bit(bq, BQ2415X_REG_CONTROL,
+				0, BQ2415X_BIT_TE);
+	case BQ2415X_CHARGER_STATUS:
+		ret = bq2415x_i2c_read_bit(bq, BQ2415X_REG_CONTROL,
+			BQ2415X_BIT_CE);
+		if (ret < 0)
+			return ret;
+		return ret > 0 ? 0 : 1;
+	case BQ2415X_CHARGER_ENABLE:
+		return bq2415x_i2c_write_bit(bq, BQ2415X_REG_CONTROL,
+				0, BQ2415X_BIT_CE);
+	case BQ2415X_CHARGER_DISABLE:
+		return bq2415x_i2c_write_bit(bq, BQ2415X_REG_CONTROL,
+				1, BQ2415X_BIT_CE);
+	case BQ2415X_HIGH_IMPEDANCE_STATUS:
+		return bq2415x_i2c_read_bit(bq, BQ2415X_REG_CONTROL,
+				BQ2415X_BIT_HZ_MODE);
+	case BQ2415X_HIGH_IMPEDANCE_ENABLE:
+		return bq2415x_i2c_write_bit(bq, BQ2415X_REG_CONTROL,
+				1, BQ2415X_BIT_HZ_MODE);
+	case BQ2415X_HIGH_IMPEDANCE_DISABLE:
+		return bq2415x_i2c_write_bit(bq, BQ2415X_REG_CONTROL,
+				0, BQ2415X_BIT_HZ_MODE);
+	case BQ2415X_BOOST_MODE_STATUS:
+		return bq2415x_i2c_read_bit(bq, BQ2415X_REG_CONTROL,
+				BQ2415X_BIT_OPA_MODE);
+	case BQ2415X_BOOST_MODE_ENABLE:
+		return bq2415x_i2c_write_bit(bq, BQ2415X_REG_CONTROL,
+				1, BQ2415X_BIT_OPA_MODE);
+	case BQ2415X_BOOST_MODE_DISABLE:
+		return bq2415x_i2c_write_bit(bq, BQ2415X_REG_CONTROL,
+				0, BQ2415X_BIT_OPA_MODE);
+
+	case BQ2415X_OTG_LEVEL:
+		return bq2415x_i2c_read_bit(bq, BQ2415X_REG_VOLTAGE,
+				BQ2415X_BIT_OTG_PL);
+	case BQ2415X_OTG_ACTIVATE_HIGH:
+		return bq2415x_i2c_write_bit(bq, BQ2415X_REG_VOLTAGE,
+				1, BQ2415X_BIT_OTG_PL);
+	case BQ2415X_OTG_ACTIVATE_LOW:
+		return bq2415x_i2c_write_bit(bq, BQ2415X_REG_VOLTAGE,
+				0, BQ2415X_BIT_OTG_PL);
+	case BQ2415X_OTG_PIN_STATUS:
+		return bq2415x_i2c_read_bit(bq, BQ2415X_REG_VOLTAGE,
+				BQ2415X_BIT_OTG_EN);
+	case BQ2415X_OTG_PIN_ENABLE:
+		return bq2415x_i2c_write_bit(bq, BQ2415X_REG_VOLTAGE,
+				1, BQ2415X_BIT_OTG_EN);
+	case BQ2415X_OTG_PIN_DISABLE:
+		return bq2415x_i2c_write_bit(bq, BQ2415X_REG_VOLTAGE,
+				0, BQ2415X_BIT_OTG_EN);
+
+	case BQ2415X_VENDER_CODE:
+		return bq2415x_i2c_read_mask(bq, BQ2415X_REG_VENDER,
+			BQ2415X_MASK_VENDER, BQ2415X_SHIFT_VENDER);
+	case BQ2415X_PART_NUMBER:
+		return bq2415x_i2c_read_mask(bq, BQ2415X_REG_VENDER,
+				BQ2415X_MASK_PN, BQ2415X_SHIFT_PN);
+	case BQ2415X_REVISION:
+		return bq2415x_i2c_read_mask(bq, BQ2415X_REG_VENDER,
+			BQ2415X_MASK_REVISION, BQ2415X_SHIFT_REVISION);
+	}
+	return -EINVAL;
+}
+
+/* detect chip type */
+static enum bq2415x_chip bq2415x_detect_chip(struct bq2415x_device *bq)
+{
+	struct i2c_client *client = to_i2c_client(bq->dev);
+	int ret = bq2415x_exec_command(bq, BQ2415X_PART_NUMBER);
+
+	if (ret < 0)
+		return ret;
+
+	switch (client->addr) {
+	case 0x6b:
+		switch (ret) {
+		case 0:
+			if (bq->chip == BQ24151A)
+				return bq->chip;
+			return BQ24151;
+		case 1:
+			if (bq->chip == BQ24150A ||
+				bq->chip == BQ24152 ||
+				bq->chip == BQ24155)
+				return bq->chip;
+			return BQ24150;
+		case 2:
+			if (bq->chip == BQ24153A)
+				return bq->chip;
+			return BQ24153;
+		default:
+			return BQUNKNOWN;
+		}
+		break;
+
+	case 0x6a:
+		switch (ret) {
+		case 0:
+			if (bq->chip == BQ24156A)
+				return bq->chip;
+			return BQ24156;
+		case 2:
+			if (bq->chip == BQ24157S)
+				return bq->chip;
+			return BQ24158;
+		default:
+			return BQUNKNOWN;
+		}
+		break;
+	}
+
+	return BQUNKNOWN;
+}
+
+/* detect chip revision */
+static int bq2415x_detect_revision(struct bq2415x_device *bq)
+{
+	int ret = bq2415x_exec_command(bq, BQ2415X_REVISION);
+	int chip = bq2415x_detect_chip(bq);
+
+	if (ret < 0 || chip < 0)
+		return -1;
+
+	switch (chip) {
+	case BQ24150:
+	case BQ24150A:
+	case BQ24151:
+	case BQ24151A:
+	case BQ24152:
+		if (ret >= 0 && ret <= 3)
+			return ret;
+		return -1;
+	case BQ24153:
+	case BQ24153A:
+	case BQ24156:
+	case BQ24156A:
+	case BQ24157S:
+	case BQ24158:
+		if (ret == 3)
+			return 0;
+		else if (ret == 1)
+			return 1;
+		return -1;
+	case BQ24155:
+		if (ret == 3)
+			return 3;
+		return -1;
+	case BQUNKNOWN:
+		return -1;
+	}
+
+	return -1;
+}
+
+/* return chip vender code */
+static int bq2415x_get_vender_code(struct bq2415x_device *bq)
+{
+	int ret;
+
+	ret = bq2415x_exec_command(bq, BQ2415X_VENDER_CODE);
+	if (ret < 0)
+		return 0;
+
+	/* convert to binary */
+	return (ret & 0x1) +
+	       ((ret >> 1) & 0x1) * 10 +
+	       ((ret >> 2) & 0x1) * 100;
+}
+
+/* reset all chip registers to default state */
+static void bq2415x_reset_chip(struct bq2415x_device *bq)
+{
+	bq2415x_i2c_write(bq, BQ2415X_REG_CURRENT, BQ2415X_RESET_CURRENT);
+	bq2415x_i2c_write(bq, BQ2415X_REG_VOLTAGE, BQ2415X_RESET_VOLTAGE);
+	bq2415x_i2c_write(bq, BQ2415X_REG_CONTROL, BQ2415X_RESET_CONTROL);
+	bq2415x_i2c_write(bq, BQ2415X_REG_STATUS, BQ2415X_RESET_STATUS);
+	bq->timer_error = NULL;
+}
+
+/**** properties functions ****/
+
+/* set current limit in mA */
+static int bq2415x_set_current_limit(struct bq2415x_device *bq, int mA)
+{
+	int val;
+
+	if (mA <= 100)
+		val = 0;
+	else if (mA <= 500)
+		val = 1;
+	else if (mA <= 800)
+		val = 2;
+	else
+		val = 3;
+
+	return bq2415x_i2c_write_mask(bq, BQ2415X_REG_CONTROL, val,
+			BQ2415X_MASK_LIMIT, BQ2415X_SHIFT_LIMIT);
+}
+
+/* get current limit in mA */
+static int bq2415x_get_current_limit(struct bq2415x_device *bq)
+{
+	int ret;
+
+	ret = bq2415x_i2c_read_mask(bq, BQ2415X_REG_CONTROL,
+			BQ2415X_MASK_LIMIT, BQ2415X_SHIFT_LIMIT);
+	if (ret < 0)
+		return ret;
+	else if (ret == 0)
+		return 100;
+	else if (ret == 1)
+		return 500;
+	else if (ret == 2)
+		return 800;
+	else if (ret == 3)
+		return 1800;
+	return -EINVAL;
+}
+
+/* set weak battery voltage in mV */
+static int bq2415x_set_weak_battery_voltage(struct bq2415x_device *bq, int mV)
+{
+	int val;
+
+	/* round to 100mV */
+	if (mV <= 3400 + 50)
+		val = 0;
+	else if (mV <= 3500 + 50)
+		val = 1;
+	else if (mV <= 3600 + 50)
+		val = 2;
+	else
+		val = 3;
+
+	return bq2415x_i2c_write_mask(bq, BQ2415X_REG_CONTROL, val,
+			BQ2415X_MASK_VLOWV, BQ2415X_SHIFT_VLOWV);
+}
+
+/* get weak battery voltage in mV */
+static int bq2415x_get_weak_battery_voltage(struct bq2415x_device *bq)
+{
+	int ret;
+
+	ret = bq2415x_i2c_read_mask(bq, BQ2415X_REG_CONTROL,
+			BQ2415X_MASK_VLOWV, BQ2415X_SHIFT_VLOWV);
+	if (ret < 0)
+		return ret;
+	return 100 * (34 + ret);
+}
+
+/* set battery regulation voltage in mV */
+static int bq2415x_set_battery_regulation_voltage(struct bq2415x_device *bq,
+						  int mV)
+{
+	int val = (mV/10 - 350) / 2;
+
+	/*
+	 * According to datasheet, maximum battery regulation voltage is
+	 * 4440mV which is b101111 = 47.
+	 */
+	if (val < 0)
+		val = 0;
+	else if (val > 47)
+		return -EINVAL;
+
+	return bq2415x_i2c_write_mask(bq, BQ2415X_REG_VOLTAGE, val,
+			BQ2415X_MASK_VO, BQ2415X_SHIFT_VO);
+}
+
+/* get battery regulation voltage in mV */
+static int bq2415x_get_battery_regulation_voltage(struct bq2415x_device *bq)
+{
+	int ret = bq2415x_i2c_read_mask(bq, BQ2415X_REG_VOLTAGE,
+			BQ2415X_MASK_VO, BQ2415X_SHIFT_VO);
+
+	if (ret < 0)
+		return ret;
+	return 10 * (350 + 2*ret);
+}
+
+/* set charge current in mA (platform data must provide resistor sense) */
+static int bq2415x_set_charge_current(struct bq2415x_device *bq, int mA)
+{
+	int val;
+
+	if (bq->init_data.resistor_sense <= 0)
+		return -EINVAL;
+
+	val = (mA * bq->init_data.resistor_sense - 37400) / 6800;
+	if (val < 0)
+		val = 0;
+	else if (val > 7)
+		val = 7;
+
+	return bq2415x_i2c_write_mask(bq, BQ2415X_REG_CURRENT, val,
+			BQ2415X_MASK_VI_CHRG | BQ2415X_MASK_RESET,
+			BQ2415X_SHIFT_VI_CHRG);
+}
+
+/* get charge current in mA (platform data must provide resistor sense) */
+static int bq2415x_get_charge_current(struct bq2415x_device *bq)
+{
+	int ret;
+
+	if (bq->init_data.resistor_sense <= 0)
+		return -EINVAL;
+
+	ret = bq2415x_i2c_read_mask(bq, BQ2415X_REG_CURRENT,
+			BQ2415X_MASK_VI_CHRG, BQ2415X_SHIFT_VI_CHRG);
+	if (ret < 0)
+		return ret;
+	return (37400 + 6800*ret) / bq->init_data.resistor_sense;
+}
+
+/* set termination current in mA (platform data must provide resistor sense) */
+static int bq2415x_set_termination_current(struct bq2415x_device *bq, int mA)
+{
+	int val;
+
+	if (bq->init_data.resistor_sense <= 0)
+		return -EINVAL;
+
+	val = (mA * bq->init_data.resistor_sense - 3400) / 3400;
+	if (val < 0)
+		val = 0;
+	else if (val > 7)
+		val = 7;
+
+	return bq2415x_i2c_write_mask(bq, BQ2415X_REG_CURRENT, val,
+			BQ2415X_MASK_VI_TERM | BQ2415X_MASK_RESET,
+			BQ2415X_SHIFT_VI_TERM);
+}
+
+/* get termination current in mA (platform data must provide resistor sense) */
+static int bq2415x_get_termination_current(struct bq2415x_device *bq)
+{
+	int ret;
+
+	if (bq->init_data.resistor_sense <= 0)
+		return -EINVAL;
+
+	ret = bq2415x_i2c_read_mask(bq, BQ2415X_REG_CURRENT,
+			BQ2415X_MASK_VI_TERM, BQ2415X_SHIFT_VI_TERM);
+	if (ret < 0)
+		return ret;
+	return (3400 + 3400*ret) / bq->init_data.resistor_sense;
+}
+
+/* set default value of property */
+#define bq2415x_set_default_value(bq, prop) \
+	do { \
+		int ret = 0; \
+		if (bq->init_data.prop != -1) \
+			ret = bq2415x_set_##prop(bq, bq->init_data.prop); \
+		if (ret < 0) \
+			return ret; \
+	} while (0)
+
+/* set default values of all properties */
+static int bq2415x_set_defaults(struct bq2415x_device *bq)
+{
+	bq2415x_exec_command(bq, BQ2415X_BOOST_MODE_DISABLE);
+	bq2415x_exec_command(bq, BQ2415X_CHARGER_DISABLE);
+	bq2415x_exec_command(bq, BQ2415X_CHARGE_TERMINATION_DISABLE);
+
+	bq2415x_set_default_value(bq, current_limit);
+	bq2415x_set_default_value(bq, weak_battery_voltage);
+	bq2415x_set_default_value(bq, battery_regulation_voltage);
+
+	if (bq->init_data.resistor_sense > 0) {
+		bq2415x_set_default_value(bq, charge_current);
+		bq2415x_set_default_value(bq, termination_current);
+		bq2415x_exec_command(bq, BQ2415X_CHARGE_TERMINATION_ENABLE);
+	}
+
+	bq2415x_exec_command(bq, BQ2415X_CHARGER_ENABLE);
+	return 0;
+}
+
+/**** charger mode functions ****/
+
+/* set charger mode */
+static int bq2415x_set_mode(struct bq2415x_device *bq, enum bq2415x_mode mode)
+{
+	int ret = 0;
+	int charger = 0;
+	int boost = 0;
+
+	if (mode == BQ2415X_MODE_BOOST)
+		boost = 1;
+	else if (mode != BQ2415X_MODE_OFF)
+		charger = 1;
+
+	if (!charger)
+		ret = bq2415x_exec_command(bq, BQ2415X_CHARGER_DISABLE);
+
+	if (!boost)
+		ret = bq2415x_exec_command(bq, BQ2415X_BOOST_MODE_DISABLE);
+
+	if (ret < 0)
+		return ret;
+
+	switch (mode) {
+	case BQ2415X_MODE_OFF:
+		dev_dbg(bq->dev, "changing mode to: Offline\n");
+		ret = bq2415x_set_current_limit(bq, 100);
+		break;
+	case BQ2415X_MODE_NONE:
+		dev_dbg(bq->dev, "changing mode to: N/A\n");
+		ret = bq2415x_set_current_limit(bq, 100);
+		break;
+	case BQ2415X_MODE_HOST_CHARGER:
+		dev_dbg(bq->dev, "changing mode to: Host/HUB charger\n");
+		ret = bq2415x_set_current_limit(bq, 500);
+		break;
+	case BQ2415X_MODE_DEDICATED_CHARGER:
+		dev_dbg(bq->dev, "changing mode to: Dedicated charger\n");
+		ret = bq2415x_set_current_limit(bq, 1800);
+		break;
+	case BQ2415X_MODE_BOOST: /* Boost mode */
+		dev_dbg(bq->dev, "changing mode to: Boost\n");
+		ret = bq2415x_set_current_limit(bq, 100);
+		break;
+	}
+
+	if (ret < 0)
+		return ret;
+
+	if (charger)
+		ret = bq2415x_exec_command(bq, BQ2415X_CHARGER_ENABLE);
+	else if (boost)
+		ret = bq2415x_exec_command(bq, BQ2415X_BOOST_MODE_ENABLE);
+
+	if (ret < 0)
+		return ret;
+
+	bq2415x_set_default_value(bq, weak_battery_voltage);
+	bq2415x_set_default_value(bq, battery_regulation_voltage);
+
+	bq->mode = mode;
+	sysfs_notify(&bq->charger->dev.kobj, NULL, "mode");
+
+	return 0;
+
+}
+
+static bool bq2415x_update_reported_mode(struct bq2415x_device *bq, int mA)
+{
+	enum bq2415x_mode mode;
+
+	if (mA == 0)
+		mode = BQ2415X_MODE_OFF;
+	else if (mA < 500)
+		mode = BQ2415X_MODE_NONE;
+	else if (mA < 1800)
+		mode = BQ2415X_MODE_HOST_CHARGER;
+	else
+		mode = BQ2415X_MODE_DEDICATED_CHARGER;
+
+	if (bq->reported_mode == mode)
+		return false;
+
+	bq->reported_mode = mode;
+	return true;
+}
+
+static int bq2415x_notifier_call(struct notifier_block *nb,
+		unsigned long val, void *v)
+{
+	struct bq2415x_device *bq =
+		container_of(nb, struct bq2415x_device, nb);
+	struct power_supply *psy = v;
+	union power_supply_propval prop;
+	int ret;
+
+	if (val != PSY_EVENT_PROP_CHANGED)
+		return NOTIFY_OK;
+
+	/* Ignore event if it was not send by notify_node/notify_device */
+	if (bq->notify_node) {
+		if (!psy->dev.parent ||
+		    psy->dev.parent->of_node != bq->notify_node)
+			return NOTIFY_OK;
+	} else if (bq->init_data.notify_device) {
+		if (strcmp(psy->desc->name, bq->init_data.notify_device) != 0)
+			return NOTIFY_OK;
+	}
+
+	dev_dbg(bq->dev, "notifier call was called\n");
+
+	ret = power_supply_get_property(psy, POWER_SUPPLY_PROP_CURRENT_MAX,
+			&prop);
+	if (ret != 0)
+		return NOTIFY_OK;
+
+	if (!bq2415x_update_reported_mode(bq, prop.intval))
+		return NOTIFY_OK;
+
+	/* if automode is not enabled do not tell about reported_mode */
+	if (bq->automode < 1)
+		return NOTIFY_OK;
+
+	schedule_delayed_work(&bq->work, 0);
+
+	return NOTIFY_OK;
+}
+
+/**** timer functions ****/
+
+/* enable/disable auto resetting chip timer */
+static void bq2415x_set_autotimer(struct bq2415x_device *bq, int state)
+{
+	mutex_lock(&bq2415x_timer_mutex);
+
+	if (bq->autotimer == state) {
+		mutex_unlock(&bq2415x_timer_mutex);
+		return;
+	}
+
+	bq->autotimer = state;
+
+	if (state) {
+		schedule_delayed_work(&bq->work, BQ2415X_TIMER_TIMEOUT * HZ);
+		bq2415x_exec_command(bq, BQ2415X_TIMER_RESET);
+		bq->timer_error = NULL;
+	} else {
+		cancel_delayed_work_sync(&bq->work);
+	}
+
+	mutex_unlock(&bq2415x_timer_mutex);
+}
+
+/* called by bq2415x_timer_work on timer error */
+static void bq2415x_timer_error(struct bq2415x_device *bq, const char *msg)
+{
+	bq->timer_error = msg;
+	sysfs_notify(&bq->charger->dev.kobj, NULL, "timer");
+	dev_err(bq->dev, "%s\n", msg);
+	if (bq->automode > 0)
+		bq->automode = 0;
+	bq2415x_set_mode(bq, BQ2415X_MODE_OFF);
+	bq2415x_set_autotimer(bq, 0);
+}
+
+/* delayed work function for auto resetting chip timer */
+static void bq2415x_timer_work(struct work_struct *work)
+{
+	struct bq2415x_device *bq = container_of(work, struct bq2415x_device,
+						 work.work);
+	int ret;
+	int error;
+	int boost;
+
+	if (bq->automode > 0 && (bq->reported_mode != bq->mode)) {
+		sysfs_notify(&bq->charger->dev.kobj, NULL, "reported_mode");
+		bq2415x_set_mode(bq, bq->reported_mode);
+	}
+
+	if (!bq->autotimer)
+		return;
+
+	ret = bq2415x_exec_command(bq, BQ2415X_TIMER_RESET);
+	if (ret < 0) {
+		bq2415x_timer_error(bq, "Resetting timer failed");
+		return;
+	}
+
+	boost = bq2415x_exec_command(bq, BQ2415X_BOOST_MODE_STATUS);
+	if (boost < 0) {
+		bq2415x_timer_error(bq, "Unknown error");
+		return;
+	}
+
+	error = bq2415x_exec_command(bq, BQ2415X_FAULT_STATUS);
+	if (error < 0) {
+		bq2415x_timer_error(bq, "Unknown error");
+		return;
+	}
+
+	if (boost) {
+		switch (error) {
+		/* Non fatal errors, chip is OK */
+		case 0: /* No error */
+			break;
+		case 6: /* Timer expired */
+			dev_err(bq->dev, "Timer expired\n");
+			break;
+		case 3: /* Battery voltage too low */
+			dev_err(bq->dev, "Battery voltage to low\n");
+			break;
+
+		/* Fatal errors, disable and reset chip */
+		case 1: /* Overvoltage protection (chip fried) */
+			bq2415x_timer_error(bq,
+				"Overvoltage protection (chip fried)");
+			return;
+		case 2: /* Overload */
+			bq2415x_timer_error(bq, "Overload");
+			return;
+		case 4: /* Battery overvoltage protection */
+			bq2415x_timer_error(bq,
+				"Battery overvoltage protection");
+			return;
+		case 5: /* Thermal shutdown (too hot) */
+			bq2415x_timer_error(bq,
+					"Thermal shutdown (too hot)");
+			return;
+		case 7: /* N/A */
+			bq2415x_timer_error(bq, "Unknown error");
+			return;
+		}
+	} else {
+		switch (error) {
+		/* Non fatal errors, chip is OK */
+		case 0: /* No error */
+			break;
+		case 2: /* Sleep mode */
+			dev_err(bq->dev, "Sleep mode\n");
+			break;
+		case 3: /* Poor input source */
+			dev_err(bq->dev, "Poor input source\n");
+			break;
+		case 6: /* Timer expired */
+			dev_err(bq->dev, "Timer expired\n");
+			break;
+		case 7: /* No battery */
+			dev_err(bq->dev, "No battery\n");
+			break;
+
+		/* Fatal errors, disable and reset chip */
+		case 1: /* Overvoltage protection (chip fried) */
+			bq2415x_timer_error(bq,
+				"Overvoltage protection (chip fried)");
+			return;
+		case 4: /* Battery overvoltage protection */
+			bq2415x_timer_error(bq,
+				"Battery overvoltage protection");
+			return;
+		case 5: /* Thermal shutdown (too hot) */
+			bq2415x_timer_error(bq,
+				"Thermal shutdown (too hot)");
+			return;
+		}
+	}
+
+	schedule_delayed_work(&bq->work, BQ2415X_TIMER_TIMEOUT * HZ);
+}
+
+/**** power supply interface code ****/
+
+static enum power_supply_property bq2415x_power_supply_props[] = {
+	/* TODO: maybe add more power supply properties */
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_MODEL_NAME,
+};
+
+static int bq2415x_power_supply_get_property(struct power_supply *psy,
+					     enum power_supply_property psp,
+					     union power_supply_propval *val)
+{
+	struct bq2415x_device *bq = power_supply_get_drvdata(psy);
+	int ret;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		ret = bq2415x_exec_command(bq, BQ2415X_CHARGE_STATUS);
+		if (ret < 0)
+			return ret;
+		else if (ret == 0) /* Ready */
+			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+		else if (ret == 1) /* Charge in progress */
+			val->intval = POWER_SUPPLY_STATUS_CHARGING;
+		else if (ret == 2) /* Charge done */
+			val->intval = POWER_SUPPLY_STATUS_FULL;
+		else
+			val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
+		break;
+	case POWER_SUPPLY_PROP_MODEL_NAME:
+		val->strval = bq->model;
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static void bq2415x_power_supply_exit(struct bq2415x_device *bq)
+{
+	bq->autotimer = 0;
+	if (bq->automode > 0)
+		bq->automode = 0;
+	cancel_delayed_work_sync(&bq->work);
+	power_supply_unregister(bq->charger);
+	kfree(bq->model);
+}
+
+/**** additional sysfs entries for power supply interface ****/
+
+/* show *_status entries */
+static ssize_t bq2415x_sysfs_show_status(struct device *dev,
+					 struct device_attribute *attr,
+					 char *buf)
+{
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct bq2415x_device *bq = power_supply_get_drvdata(psy);
+	enum bq2415x_command command;
+	int ret;
+
+	if (strcmp(attr->attr.name, "otg_status") == 0)
+		command = BQ2415X_OTG_STATUS;
+	else if (strcmp(attr->attr.name, "charge_status") == 0)
+		command = BQ2415X_CHARGE_STATUS;
+	else if (strcmp(attr->attr.name, "boost_status") == 0)
+		command = BQ2415X_BOOST_STATUS;
+	else if (strcmp(attr->attr.name, "fault_status") == 0)
+		command = BQ2415X_FAULT_STATUS;
+	else
+		return -EINVAL;
+
+	ret = bq2415x_exec_command(bq, command);
+	if (ret < 0)
+		return ret;
+	return sprintf(buf, "%d\n", ret);
+}
+
+/*
+ * set timer entry:
+ *    auto - enable auto mode
+ *    off - disable auto mode
+ *    (other values) - reset chip timer
+ */
+static ssize_t bq2415x_sysfs_set_timer(struct device *dev,
+				       struct device_attribute *attr,
+				       const char *buf,
+				       size_t count)
+{
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct bq2415x_device *bq = power_supply_get_drvdata(psy);
+	int ret = 0;
+
+	if (strncmp(buf, "auto", 4) == 0)
+		bq2415x_set_autotimer(bq, 1);
+	else if (strncmp(buf, "off", 3) == 0)
+		bq2415x_set_autotimer(bq, 0);
+	else
+		ret = bq2415x_exec_command(bq, BQ2415X_TIMER_RESET);
+
+	if (ret < 0)
+		return ret;
+	return count;
+}
+
+/* show timer entry (auto or off) */
+static ssize_t bq2415x_sysfs_show_timer(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct bq2415x_device *bq = power_supply_get_drvdata(psy);
+
+	if (bq->timer_error)
+		return sprintf(buf, "%s\n", bq->timer_error);
+
+	if (bq->autotimer)
+		return sprintf(buf, "auto\n");
+	return sprintf(buf, "off\n");
+}
+
+/*
+ * set mode entry:
+ *    auto - if automode is supported, enable it and set mode to reported
+ *    none - disable charger and boost mode
+ *    host - charging mode for host/hub chargers (current limit 500mA)
+ *    dedicated - charging mode for dedicated chargers (unlimited current limit)
+ *    boost - disable charger and enable boost mode
+ */
+static ssize_t bq2415x_sysfs_set_mode(struct device *dev,
+				      struct device_attribute *attr,
+				      const char *buf,
+				      size_t count)
+{
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct bq2415x_device *bq = power_supply_get_drvdata(psy);
+	enum bq2415x_mode mode;
+	int ret = 0;
+
+	if (strncmp(buf, "auto", 4) == 0) {
+		if (bq->automode < 0)
+			return -EINVAL;
+		bq->automode = 1;
+		mode = bq->reported_mode;
+	} else if (strncmp(buf, "off", 3) == 0) {
+		if (bq->automode > 0)
+			bq->automode = 0;
+		mode = BQ2415X_MODE_OFF;
+	} else if (strncmp(buf, "none", 4) == 0) {
+		if (bq->automode > 0)
+			bq->automode = 0;
+		mode = BQ2415X_MODE_NONE;
+	} else if (strncmp(buf, "host", 4) == 0) {
+		if (bq->automode > 0)
+			bq->automode = 0;
+		mode = BQ2415X_MODE_HOST_CHARGER;
+	} else if (strncmp(buf, "dedicated", 9) == 0) {
+		if (bq->automode > 0)
+			bq->automode = 0;
+		mode = BQ2415X_MODE_DEDICATED_CHARGER;
+	} else if (strncmp(buf, "boost", 5) == 0) {
+		if (bq->automode > 0)
+			bq->automode = 0;
+		mode = BQ2415X_MODE_BOOST;
+	} else if (strncmp(buf, "reset", 5) == 0) {
+		bq2415x_reset_chip(bq);
+		bq2415x_set_defaults(bq);
+		if (bq->automode <= 0)
+			return count;
+		bq->automode = 1;
+		mode = bq->reported_mode;
+	} else {
+		return -EINVAL;
+	}
+
+	ret = bq2415x_set_mode(bq, mode);
+	if (ret < 0)
+		return ret;
+	return count;
+}
+
+/* show mode entry (auto, none, host, dedicated or boost) */
+static ssize_t bq2415x_sysfs_show_mode(struct device *dev,
+				       struct device_attribute *attr,
+				       char *buf)
+{
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct bq2415x_device *bq = power_supply_get_drvdata(psy);
+	ssize_t ret = 0;
+
+	if (bq->automode > 0)
+		ret += sprintf(buf+ret, "auto (");
+
+	switch (bq->mode) {
+	case BQ2415X_MODE_OFF:
+		ret += sprintf(buf+ret, "off");
+		break;
+	case BQ2415X_MODE_NONE:
+		ret += sprintf(buf+ret, "none");
+		break;
+	case BQ2415X_MODE_HOST_CHARGER:
+		ret += sprintf(buf+ret, "host");
+		break;
+	case BQ2415X_MODE_DEDICATED_CHARGER:
+		ret += sprintf(buf+ret, "dedicated");
+		break;
+	case BQ2415X_MODE_BOOST:
+		ret += sprintf(buf+ret, "boost");
+		break;
+	}
+
+	if (bq->automode > 0)
+		ret += sprintf(buf+ret, ")");
+
+	ret += sprintf(buf+ret, "\n");
+	return ret;
+}
+
+/* show reported_mode entry (none, host, dedicated or boost) */
+static ssize_t bq2415x_sysfs_show_reported_mode(struct device *dev,
+						struct device_attribute *attr,
+						char *buf)
+{
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct bq2415x_device *bq = power_supply_get_drvdata(psy);
+
+	if (bq->automode < 0)
+		return -EINVAL;
+
+	switch (bq->reported_mode) {
+	case BQ2415X_MODE_OFF:
+		return sprintf(buf, "off\n");
+	case BQ2415X_MODE_NONE:
+		return sprintf(buf, "none\n");
+	case BQ2415X_MODE_HOST_CHARGER:
+		return sprintf(buf, "host\n");
+	case BQ2415X_MODE_DEDICATED_CHARGER:
+		return sprintf(buf, "dedicated\n");
+	case BQ2415X_MODE_BOOST:
+		return sprintf(buf, "boost\n");
+	}
+
+	return -EINVAL;
+}
+
+/* directly set raw value to chip register, format: 'register value' */
+static ssize_t bq2415x_sysfs_set_registers(struct device *dev,
+					   struct device_attribute *attr,
+					   const char *buf,
+					   size_t count)
+{
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct bq2415x_device *bq = power_supply_get_drvdata(psy);
+	ssize_t ret = 0;
+	unsigned int reg;
+	unsigned int val;
+
+	if (sscanf(buf, "%x %x", &reg, &val) != 2)
+		return -EINVAL;
+
+	if (reg > 4 || val > 255)
+		return -EINVAL;
+
+	ret = bq2415x_i2c_write(bq, reg, val);
+	if (ret < 0)
+		return ret;
+	return count;
+}
+
+/* print value of chip register, format: 'register=value' */
+static ssize_t bq2415x_sysfs_print_reg(struct bq2415x_device *bq,
+				       u8 reg,
+				       char *buf)
+{
+	int ret = bq2415x_i2c_read(bq, reg);
+
+	if (ret < 0)
+		return sprintf(buf, "%#.2x=error %d\n", reg, ret);
+	return sprintf(buf, "%#.2x=%#.2x\n", reg, ret);
+}
+
+/* show all raw values of chip register, format per line: 'register=value' */
+static ssize_t bq2415x_sysfs_show_registers(struct device *dev,
+					    struct device_attribute *attr,
+					    char *buf)
+{
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct bq2415x_device *bq = power_supply_get_drvdata(psy);
+	ssize_t ret = 0;
+
+	ret += bq2415x_sysfs_print_reg(bq, BQ2415X_REG_STATUS, buf+ret);
+	ret += bq2415x_sysfs_print_reg(bq, BQ2415X_REG_CONTROL, buf+ret);
+	ret += bq2415x_sysfs_print_reg(bq, BQ2415X_REG_VOLTAGE, buf+ret);
+	ret += bq2415x_sysfs_print_reg(bq, BQ2415X_REG_VENDER, buf+ret);
+	ret += bq2415x_sysfs_print_reg(bq, BQ2415X_REG_CURRENT, buf+ret);
+	return ret;
+}
+
+/* set current and voltage limit entries (in mA or mV) */
+static ssize_t bq2415x_sysfs_set_limit(struct device *dev,
+				       struct device_attribute *attr,
+				       const char *buf,
+				       size_t count)
+{
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct bq2415x_device *bq = power_supply_get_drvdata(psy);
+	long val;
+	int ret;
+
+	if (kstrtol(buf, 10, &val) < 0)
+		return -EINVAL;
+
+	if (strcmp(attr->attr.name, "current_limit") == 0)
+		ret = bq2415x_set_current_limit(bq, val);
+	else if (strcmp(attr->attr.name, "weak_battery_voltage") == 0)
+		ret = bq2415x_set_weak_battery_voltage(bq, val);
+	else if (strcmp(attr->attr.name, "battery_regulation_voltage") == 0)
+		ret = bq2415x_set_battery_regulation_voltage(bq, val);
+	else if (strcmp(attr->attr.name, "charge_current") == 0)
+		ret = bq2415x_set_charge_current(bq, val);
+	else if (strcmp(attr->attr.name, "termination_current") == 0)
+		ret = bq2415x_set_termination_current(bq, val);
+	else
+		return -EINVAL;
+
+	if (ret < 0)
+		return ret;
+	return count;
+}
+
+/* show current and voltage limit entries (in mA or mV) */
+static ssize_t bq2415x_sysfs_show_limit(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct bq2415x_device *bq = power_supply_get_drvdata(psy);
+	int ret;
+
+	if (strcmp(attr->attr.name, "current_limit") == 0)
+		ret = bq2415x_get_current_limit(bq);
+	else if (strcmp(attr->attr.name, "weak_battery_voltage") == 0)
+		ret = bq2415x_get_weak_battery_voltage(bq);
+	else if (strcmp(attr->attr.name, "battery_regulation_voltage") == 0)
+		ret = bq2415x_get_battery_regulation_voltage(bq);
+	else if (strcmp(attr->attr.name, "charge_current") == 0)
+		ret = bq2415x_get_charge_current(bq);
+	else if (strcmp(attr->attr.name, "termination_current") == 0)
+		ret = bq2415x_get_termination_current(bq);
+	else
+		return -EINVAL;
+
+	if (ret < 0)
+		return ret;
+	return sprintf(buf, "%d\n", ret);
+}
+
+/* set *_enable entries */
+static ssize_t bq2415x_sysfs_set_enable(struct device *dev,
+					struct device_attribute *attr,
+					const char *buf,
+					size_t count)
+{
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct bq2415x_device *bq = power_supply_get_drvdata(psy);
+	enum bq2415x_command command;
+	long val;
+	int ret;
+
+	if (kstrtol(buf, 10, &val) < 0)
+		return -EINVAL;
+
+	if (strcmp(attr->attr.name, "charge_termination_enable") == 0)
+		command = val ? BQ2415X_CHARGE_TERMINATION_ENABLE :
+			BQ2415X_CHARGE_TERMINATION_DISABLE;
+	else if (strcmp(attr->attr.name, "high_impedance_enable") == 0)
+		command = val ? BQ2415X_HIGH_IMPEDANCE_ENABLE :
+			BQ2415X_HIGH_IMPEDANCE_DISABLE;
+	else if (strcmp(attr->attr.name, "otg_pin_enable") == 0)
+		command = val ? BQ2415X_OTG_PIN_ENABLE :
+			BQ2415X_OTG_PIN_DISABLE;
+	else if (strcmp(attr->attr.name, "stat_pin_enable") == 0)
+		command = val ? BQ2415X_STAT_PIN_ENABLE :
+			BQ2415X_STAT_PIN_DISABLE;
+	else
+		return -EINVAL;
+
+	ret = bq2415x_exec_command(bq, command);
+	if (ret < 0)
+		return ret;
+	return count;
+}
+
+/* show *_enable entries */
+static ssize_t bq2415x_sysfs_show_enable(struct device *dev,
+					 struct device_attribute *attr,
+					 char *buf)
+{
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct bq2415x_device *bq = power_supply_get_drvdata(psy);
+	enum bq2415x_command command;
+	int ret;
+
+	if (strcmp(attr->attr.name, "charge_termination_enable") == 0)
+		command = BQ2415X_CHARGE_TERMINATION_STATUS;
+	else if (strcmp(attr->attr.name, "high_impedance_enable") == 0)
+		command = BQ2415X_HIGH_IMPEDANCE_STATUS;
+	else if (strcmp(attr->attr.name, "otg_pin_enable") == 0)
+		command = BQ2415X_OTG_PIN_STATUS;
+	else if (strcmp(attr->attr.name, "stat_pin_enable") == 0)
+		command = BQ2415X_STAT_PIN_STATUS;
+	else
+		return -EINVAL;
+
+	ret = bq2415x_exec_command(bq, command);
+	if (ret < 0)
+		return ret;
+	return sprintf(buf, "%d\n", ret);
+}
+
+static DEVICE_ATTR(current_limit, S_IWUSR | S_IRUGO,
+		bq2415x_sysfs_show_limit, bq2415x_sysfs_set_limit);
+static DEVICE_ATTR(weak_battery_voltage, S_IWUSR | S_IRUGO,
+		bq2415x_sysfs_show_limit, bq2415x_sysfs_set_limit);
+static DEVICE_ATTR(battery_regulation_voltage, S_IWUSR | S_IRUGO,
+		bq2415x_sysfs_show_limit, bq2415x_sysfs_set_limit);
+static DEVICE_ATTR(charge_current, S_IWUSR | S_IRUGO,
+		bq2415x_sysfs_show_limit, bq2415x_sysfs_set_limit);
+static DEVICE_ATTR(termination_current, S_IWUSR | S_IRUGO,
+		bq2415x_sysfs_show_limit, bq2415x_sysfs_set_limit);
+
+static DEVICE_ATTR(charge_termination_enable, S_IWUSR | S_IRUGO,
+		bq2415x_sysfs_show_enable, bq2415x_sysfs_set_enable);
+static DEVICE_ATTR(high_impedance_enable, S_IWUSR | S_IRUGO,
+		bq2415x_sysfs_show_enable, bq2415x_sysfs_set_enable);
+static DEVICE_ATTR(otg_pin_enable, S_IWUSR | S_IRUGO,
+		bq2415x_sysfs_show_enable, bq2415x_sysfs_set_enable);
+static DEVICE_ATTR(stat_pin_enable, S_IWUSR | S_IRUGO,
+		bq2415x_sysfs_show_enable, bq2415x_sysfs_set_enable);
+
+static DEVICE_ATTR(reported_mode, S_IRUGO,
+		bq2415x_sysfs_show_reported_mode, NULL);
+static DEVICE_ATTR(mode, S_IWUSR | S_IRUGO,
+		bq2415x_sysfs_show_mode, bq2415x_sysfs_set_mode);
+static DEVICE_ATTR(timer, S_IWUSR | S_IRUGO,
+		bq2415x_sysfs_show_timer, bq2415x_sysfs_set_timer);
+
+static DEVICE_ATTR(registers, S_IWUSR | S_IRUGO,
+		bq2415x_sysfs_show_registers, bq2415x_sysfs_set_registers);
+
+static DEVICE_ATTR(otg_status, S_IRUGO, bq2415x_sysfs_show_status, NULL);
+static DEVICE_ATTR(charge_status, S_IRUGO, bq2415x_sysfs_show_status, NULL);
+static DEVICE_ATTR(boost_status, S_IRUGO, bq2415x_sysfs_show_status, NULL);
+static DEVICE_ATTR(fault_status, S_IRUGO, bq2415x_sysfs_show_status, NULL);
+
+static struct attribute *bq2415x_sysfs_attrs[] = {
+	/*
+	 * TODO: some (appropriate) of these attrs should be switched to
+	 * use power supply class props.
+	 */
+	&dev_attr_current_limit.attr,
+	&dev_attr_weak_battery_voltage.attr,
+	&dev_attr_battery_regulation_voltage.attr,
+	&dev_attr_charge_current.attr,
+	&dev_attr_termination_current.attr,
+
+	&dev_attr_charge_termination_enable.attr,
+	&dev_attr_high_impedance_enable.attr,
+	&dev_attr_otg_pin_enable.attr,
+	&dev_attr_stat_pin_enable.attr,
+
+	&dev_attr_reported_mode.attr,
+	&dev_attr_mode.attr,
+	&dev_attr_timer.attr,
+
+	&dev_attr_registers.attr,
+
+	&dev_attr_otg_status.attr,
+	&dev_attr_charge_status.attr,
+	&dev_attr_boost_status.attr,
+	&dev_attr_fault_status.attr,
+	NULL,
+};
+
+ATTRIBUTE_GROUPS(bq2415x_sysfs);
+
+static int bq2415x_power_supply_init(struct bq2415x_device *bq)
+{
+	int ret;
+	int chip;
+	char revstr[8];
+	struct power_supply_config psy_cfg = {
+		.drv_data = bq,
+		.of_node = bq->dev->of_node,
+		.attr_grp = bq2415x_sysfs_groups,
+	};
+
+	bq->charger_desc.name = bq->name;
+	bq->charger_desc.type = POWER_SUPPLY_TYPE_USB;
+	bq->charger_desc.properties = bq2415x_power_supply_props;
+	bq->charger_desc.num_properties =
+			ARRAY_SIZE(bq2415x_power_supply_props);
+	bq->charger_desc.get_property = bq2415x_power_supply_get_property;
+
+	ret = bq2415x_detect_chip(bq);
+	if (ret < 0)
+		chip = BQUNKNOWN;
+	else
+		chip = ret;
+
+	ret = bq2415x_detect_revision(bq);
+	if (ret < 0)
+		strcpy(revstr, "unknown");
+	else
+		sprintf(revstr, "1.%d", ret);
+
+	bq->model = kasprintf(GFP_KERNEL,
+				"chip %s, revision %s, vender code %.3d",
+				bq2415x_chip_name[chip], revstr,
+				bq2415x_get_vender_code(bq));
+	if (!bq->model) {
+		dev_err(bq->dev, "failed to allocate model name\n");
+		return -ENOMEM;
+	}
+
+	bq->charger = power_supply_register(bq->dev, &bq->charger_desc,
+					    &psy_cfg);
+	if (IS_ERR(bq->charger)) {
+		kfree(bq->model);
+		return PTR_ERR(bq->charger);
+	}
+
+	return 0;
+}
+
+/* main bq2415x probe function */
+static int bq2415x_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	int ret;
+	int num;
+	char *name = NULL;
+	struct bq2415x_device *bq;
+	struct device_node *np = client->dev.of_node;
+	struct bq2415x_platform_data *pdata = client->dev.platform_data;
+	const struct acpi_device_id *acpi_id = NULL;
+	struct power_supply *notify_psy = NULL;
+	union power_supply_propval prop;
+
+	if (!np && !pdata && !ACPI_HANDLE(&client->dev)) {
+		dev_err(&client->dev, "Neither devicetree, nor platform data, nor ACPI support\n");
+		return -ENODEV;
+	}
+
+	/* Get new ID for the new device */
+	mutex_lock(&bq2415x_id_mutex);
+	num = idr_alloc(&bq2415x_id, client, 0, 0, GFP_KERNEL);
+	mutex_unlock(&bq2415x_id_mutex);
+	if (num < 0)
+		return num;
+
+	if (id) {
+		name = kasprintf(GFP_KERNEL, "%s-%d", id->name, num);
+	} else if (ACPI_HANDLE(&client->dev)) {
+		acpi_id =
+			acpi_match_device(client->dev.driver->acpi_match_table,
+					  &client->dev);
+		if (!acpi_id) {
+			dev_err(&client->dev, "failed to match device name\n");
+			ret = -ENODEV;
+			goto error_1;
+		}
+		name = kasprintf(GFP_KERNEL, "%s-%d", acpi_id->id, num);
+	}
+	if (!name) {
+		dev_err(&client->dev, "failed to allocate device name\n");
+		ret = -ENOMEM;
+		goto error_1;
+	}
+
+	bq = devm_kzalloc(&client->dev, sizeof(*bq), GFP_KERNEL);
+	if (!bq) {
+		ret = -ENOMEM;
+		goto error_2;
+	}
+
+	i2c_set_clientdata(client, bq);
+
+	bq->id = num;
+	bq->dev = &client->dev;
+	if (id)
+		bq->chip = id->driver_data;
+	else if (ACPI_HANDLE(bq->dev))
+		bq->chip = acpi_id->driver_data;
+	bq->name = name;
+	bq->mode = BQ2415X_MODE_OFF;
+	bq->reported_mode = BQ2415X_MODE_OFF;
+	bq->autotimer = 0;
+	bq->automode = 0;
+
+	if (np || ACPI_HANDLE(bq->dev)) {
+		ret = device_property_read_u32(bq->dev,
+					       "ti,current-limit",
+					       &bq->init_data.current_limit);
+		if (ret)
+			goto error_2;
+		ret = device_property_read_u32(bq->dev,
+					"ti,weak-battery-voltage",
+					&bq->init_data.weak_battery_voltage);
+		if (ret)
+			goto error_2;
+		ret = device_property_read_u32(bq->dev,
+				"ti,battery-regulation-voltage",
+				&bq->init_data.battery_regulation_voltage);
+		if (ret)
+			goto error_2;
+		ret = device_property_read_u32(bq->dev,
+					       "ti,charge-current",
+					       &bq->init_data.charge_current);
+		if (ret)
+			goto error_2;
+		ret = device_property_read_u32(bq->dev,
+				"ti,termination-current",
+				&bq->init_data.termination_current);
+		if (ret)
+			goto error_2;
+		ret = device_property_read_u32(bq->dev,
+					       "ti,resistor-sense",
+					       &bq->init_data.resistor_sense);
+		if (ret)
+			goto error_2;
+		if (np)
+			bq->notify_node = of_parse_phandle(np,
+						"ti,usb-charger-detection", 0);
+	} else {
+		memcpy(&bq->init_data, pdata, sizeof(bq->init_data));
+	}
+
+	bq2415x_reset_chip(bq);
+
+	ret = bq2415x_power_supply_init(bq);
+	if (ret) {
+		dev_err(bq->dev, "failed to register power supply: %d\n", ret);
+		goto error_2;
+	}
+
+	ret = bq2415x_set_defaults(bq);
+	if (ret) {
+		dev_err(bq->dev, "failed to set default values: %d\n", ret);
+		goto error_3;
+	}
+
+	if (bq->notify_node || bq->init_data.notify_device) {
+		bq->nb.notifier_call = bq2415x_notifier_call;
+		ret = power_supply_reg_notifier(&bq->nb);
+		if (ret) {
+			dev_err(bq->dev, "failed to reg notifier: %d\n", ret);
+			goto error_3;
+		}
+
+		bq->automode = 1;
+		dev_info(bq->dev, "automode supported, waiting for events\n");
+	} else {
+		bq->automode = -1;
+		dev_info(bq->dev, "automode not supported\n");
+	}
+
+	/* Query for initial reported_mode and set it */
+	if (bq->nb.notifier_call) {
+		if (np) {
+			notify_psy = power_supply_get_by_phandle(np,
+						"ti,usb-charger-detection");
+			if (IS_ERR(notify_psy))
+				notify_psy = NULL;
+		} else if (bq->init_data.notify_device) {
+			notify_psy = power_supply_get_by_name(
+						bq->init_data.notify_device);
+		}
+	}
+	if (notify_psy) {
+		ret = power_supply_get_property(notify_psy,
+					POWER_SUPPLY_PROP_CURRENT_MAX, &prop);
+		power_supply_put(notify_psy);
+
+		if (ret == 0) {
+			bq2415x_update_reported_mode(bq, prop.intval);
+			bq2415x_set_mode(bq, bq->reported_mode);
+		}
+	}
+
+	INIT_DELAYED_WORK(&bq->work, bq2415x_timer_work);
+	bq2415x_set_autotimer(bq, 1);
+
+	dev_info(bq->dev, "driver registered\n");
+	return 0;
+
+error_3:
+	bq2415x_power_supply_exit(bq);
+error_2:
+	if (bq)
+		of_node_put(bq->notify_node);
+	kfree(name);
+error_1:
+	mutex_lock(&bq2415x_id_mutex);
+	idr_remove(&bq2415x_id, num);
+	mutex_unlock(&bq2415x_id_mutex);
+
+	return ret;
+}
+
+/* main bq2415x remove function */
+
+static int bq2415x_remove(struct i2c_client *client)
+{
+	struct bq2415x_device *bq = i2c_get_clientdata(client);
+
+	if (bq->nb.notifier_call)
+		power_supply_unreg_notifier(&bq->nb);
+
+	of_node_put(bq->notify_node);
+	bq2415x_power_supply_exit(bq);
+
+	bq2415x_reset_chip(bq);
+
+	mutex_lock(&bq2415x_id_mutex);
+	idr_remove(&bq2415x_id, bq->id);
+	mutex_unlock(&bq2415x_id_mutex);
+
+	dev_info(bq->dev, "driver unregistered\n");
+
+	kfree(bq->name);
+
+	return 0;
+}
+
+static const struct i2c_device_id bq2415x_i2c_id_table[] = {
+	{ "bq2415x", BQUNKNOWN },
+	{ "bq24150", BQ24150 },
+	{ "bq24150a", BQ24150A },
+	{ "bq24151", BQ24151 },
+	{ "bq24151a", BQ24151A },
+	{ "bq24152", BQ24152 },
+	{ "bq24153", BQ24153 },
+	{ "bq24153a", BQ24153A },
+	{ "bq24155", BQ24155 },
+	{ "bq24156", BQ24156 },
+	{ "bq24156a", BQ24156A },
+	{ "bq24157s", BQ24157S },
+	{ "bq24158", BQ24158 },
+	{},
+};
+MODULE_DEVICE_TABLE(i2c, bq2415x_i2c_id_table);
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id bq2415x_i2c_acpi_match[] = {
+	{ "BQ2415X", BQUNKNOWN },
+	{ "BQ241500", BQ24150 },
+	{ "BQA24150", BQ24150A },
+	{ "BQ241510", BQ24151 },
+	{ "BQA24151", BQ24151A },
+	{ "BQ241520", BQ24152 },
+	{ "BQ241530", BQ24153 },
+	{ "BQA24153", BQ24153A },
+	{ "BQ241550", BQ24155 },
+	{ "BQ241560", BQ24156 },
+	{ "BQA24156", BQ24156A },
+	{ "BQS24157", BQ24157S },
+	{ "BQ241580", BQ24158 },
+	{},
+};
+MODULE_DEVICE_TABLE(acpi, bq2415x_i2c_acpi_match);
+#endif
+
+#ifdef CONFIG_OF
+static const struct of_device_id bq2415x_of_match_table[] = {
+	{ .compatible = "ti,bq24150" },
+	{ .compatible = "ti,bq24150a" },
+	{ .compatible = "ti,bq24151" },
+	{ .compatible = "ti,bq24151a" },
+	{ .compatible = "ti,bq24152" },
+	{ .compatible = "ti,bq24153" },
+	{ .compatible = "ti,bq24153a" },
+	{ .compatible = "ti,bq24155" },
+	{ .compatible = "ti,bq24156" },
+	{ .compatible = "ti,bq24156a" },
+	{ .compatible = "ti,bq24157s" },
+	{ .compatible = "ti,bq24158" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, bq2415x_of_match_table);
+#endif
+
+static struct i2c_driver bq2415x_driver = {
+	.driver = {
+		.name = "bq2415x-charger",
+		.of_match_table = of_match_ptr(bq2415x_of_match_table),
+		.acpi_match_table = ACPI_PTR(bq2415x_i2c_acpi_match),
+	},
+	.probe = bq2415x_probe,
+	.remove = bq2415x_remove,
+	.id_table = bq2415x_i2c_id_table,
+};
+module_i2c_driver(bq2415x_driver);
+
+MODULE_AUTHOR("Pali Rohár <pali@kernel.org>");
+MODULE_DESCRIPTION("bq2415x charger driver");
+MODULE_LICENSE("GPL");