Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1988 insertions, 0 deletions

diff --git a/drivers/power/supply/bq24190_charger.c b/drivers/power/supply/bq24190_charger.c
new file mode 100644
index 000000000..5769b3685
--- /dev/null
+++ b/drivers/power/supply/bq24190_charger.c
@@ -0,0 +1,1988 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Driver for the TI bq24190 battery charger.
+ *
+ * Author: Mark A. Greer <mgreer@animalcreek.com>
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/of_irq.h>
+#include <linux/of_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/power_supply.h>
+#include <linux/power/bq24190_charger.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/workqueue.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/extcon-provider.h>
+
+#define	BQ24190_MANUFACTURER	"Texas Instruments"
+
+#define BQ24190_REG_ISC		0x00 /* Input Source Control */
+#define BQ24190_REG_ISC_EN_HIZ_MASK		BIT(7)
+#define BQ24190_REG_ISC_EN_HIZ_SHIFT		7
+#define BQ24190_REG_ISC_VINDPM_MASK		(BIT(6) | BIT(5) | BIT(4) | \
+						 BIT(3))
+#define BQ24190_REG_ISC_VINDPM_SHIFT		3
+#define BQ24190_REG_ISC_IINLIM_MASK		(BIT(2) | BIT(1) | BIT(0))
+#define BQ24190_REG_ISC_IINLIM_SHIFT		0
+
+#define BQ24190_REG_POC		0x01 /* Power-On Configuration */
+#define BQ24190_REG_POC_RESET_MASK		BIT(7)
+#define BQ24190_REG_POC_RESET_SHIFT		7
+#define BQ24190_REG_POC_WDT_RESET_MASK		BIT(6)
+#define BQ24190_REG_POC_WDT_RESET_SHIFT		6
+#define BQ24190_REG_POC_CHG_CONFIG_MASK		(BIT(5) | BIT(4))
+#define BQ24190_REG_POC_CHG_CONFIG_SHIFT	4
+#define BQ24190_REG_POC_CHG_CONFIG_DISABLE		0x0
+#define BQ24190_REG_POC_CHG_CONFIG_CHARGE		0x1
+#define BQ24190_REG_POC_CHG_CONFIG_OTG			0x2
+#define BQ24190_REG_POC_CHG_CONFIG_OTG_ALT		0x3
+#define BQ24190_REG_POC_SYS_MIN_MASK		(BIT(3) | BIT(2) | BIT(1))
+#define BQ24190_REG_POC_SYS_MIN_SHIFT		1
+#define BQ24190_REG_POC_SYS_MIN_MIN			3000
+#define BQ24190_REG_POC_SYS_MIN_MAX			3700
+#define BQ24190_REG_POC_BOOST_LIM_MASK		BIT(0)
+#define BQ24190_REG_POC_BOOST_LIM_SHIFT		0
+
+#define BQ24190_REG_CCC		0x02 /* Charge Current Control */
+#define BQ24190_REG_CCC_ICHG_MASK		(BIT(7) | BIT(6) | BIT(5) | \
+						 BIT(4) | BIT(3) | BIT(2))
+#define BQ24190_REG_CCC_ICHG_SHIFT		2
+#define BQ24190_REG_CCC_FORCE_20PCT_MASK	BIT(0)
+#define BQ24190_REG_CCC_FORCE_20PCT_SHIFT	0
+
+#define BQ24190_REG_PCTCC	0x03 /* Pre-charge/Termination Current Cntl */
+#define BQ24190_REG_PCTCC_IPRECHG_MASK		(BIT(7) | BIT(6) | BIT(5) | \
+						 BIT(4))
+#define BQ24190_REG_PCTCC_IPRECHG_SHIFT		4
+#define BQ24190_REG_PCTCC_IPRECHG_MIN			128
+#define BQ24190_REG_PCTCC_IPRECHG_MAX			2048
+#define BQ24190_REG_PCTCC_ITERM_MASK		(BIT(3) | BIT(2) | BIT(1) | \
+						 BIT(0))
+#define BQ24190_REG_PCTCC_ITERM_SHIFT		0
+#define BQ24190_REG_PCTCC_ITERM_MIN			128
+#define BQ24190_REG_PCTCC_ITERM_MAX			2048
+
+#define BQ24190_REG_CVC		0x04 /* Charge Voltage Control */
+#define BQ24190_REG_CVC_VREG_MASK		(BIT(7) | BIT(6) | BIT(5) | \
+						 BIT(4) | BIT(3) | BIT(2))
+#define BQ24190_REG_CVC_VREG_SHIFT		2
+#define BQ24190_REG_CVC_BATLOWV_MASK		BIT(1)
+#define BQ24190_REG_CVC_BATLOWV_SHIFT		1
+#define BQ24190_REG_CVC_VRECHG_MASK		BIT(0)
+#define BQ24190_REG_CVC_VRECHG_SHIFT		0
+
+#define BQ24190_REG_CTTC	0x05 /* Charge Term/Timer Control */
+#define BQ24190_REG_CTTC_EN_TERM_MASK		BIT(7)
+#define BQ24190_REG_CTTC_EN_TERM_SHIFT		7
+#define BQ24190_REG_CTTC_TERM_STAT_MASK		BIT(6)
+#define BQ24190_REG_CTTC_TERM_STAT_SHIFT	6
+#define BQ24190_REG_CTTC_WATCHDOG_MASK		(BIT(5) | BIT(4))
+#define BQ24190_REG_CTTC_WATCHDOG_SHIFT		4
+#define BQ24190_REG_CTTC_EN_TIMER_MASK		BIT(3)
+#define BQ24190_REG_CTTC_EN_TIMER_SHIFT		3
+#define BQ24190_REG_CTTC_CHG_TIMER_MASK		(BIT(2) | BIT(1))
+#define BQ24190_REG_CTTC_CHG_TIMER_SHIFT	1
+#define BQ24190_REG_CTTC_JEITA_ISET_MASK	BIT(0)
+#define BQ24190_REG_CTTC_JEITA_ISET_SHIFT	0
+
+#define BQ24190_REG_ICTRC	0x06 /* IR Comp/Thermal Regulation Control */
+#define BQ24190_REG_ICTRC_BAT_COMP_MASK		(BIT(7) | BIT(6) | BIT(5))
+#define BQ24190_REG_ICTRC_BAT_COMP_SHIFT	5
+#define BQ24190_REG_ICTRC_VCLAMP_MASK		(BIT(4) | BIT(3) | BIT(2))
+#define BQ24190_REG_ICTRC_VCLAMP_SHIFT		2
+#define BQ24190_REG_ICTRC_TREG_MASK		(BIT(1) | BIT(0))
+#define BQ24190_REG_ICTRC_TREG_SHIFT		0
+
+#define BQ24190_REG_MOC		0x07 /* Misc. Operation Control */
+#define BQ24190_REG_MOC_DPDM_EN_MASK		BIT(7)
+#define BQ24190_REG_MOC_DPDM_EN_SHIFT		7
+#define BQ24190_REG_MOC_TMR2X_EN_MASK		BIT(6)
+#define BQ24190_REG_MOC_TMR2X_EN_SHIFT		6
+#define BQ24190_REG_MOC_BATFET_DISABLE_MASK	BIT(5)
+#define BQ24190_REG_MOC_BATFET_DISABLE_SHIFT	5
+#define BQ24190_REG_MOC_JEITA_VSET_MASK		BIT(4)
+#define BQ24190_REG_MOC_JEITA_VSET_SHIFT	4
+#define BQ24190_REG_MOC_INT_MASK_MASK		(BIT(1) | BIT(0))
+#define BQ24190_REG_MOC_INT_MASK_SHIFT		0
+
+#define BQ24190_REG_SS		0x08 /* System Status */
+#define BQ24190_REG_SS_VBUS_STAT_MASK		(BIT(7) | BIT(6))
+#define BQ24190_REG_SS_VBUS_STAT_SHIFT		6
+#define BQ24190_REG_SS_CHRG_STAT_MASK		(BIT(5) | BIT(4))
+#define BQ24190_REG_SS_CHRG_STAT_SHIFT		4
+#define BQ24190_REG_SS_DPM_STAT_MASK		BIT(3)
+#define BQ24190_REG_SS_DPM_STAT_SHIFT		3
+#define BQ24190_REG_SS_PG_STAT_MASK		BIT(2)
+#define BQ24190_REG_SS_PG_STAT_SHIFT		2
+#define BQ24190_REG_SS_THERM_STAT_MASK		BIT(1)
+#define BQ24190_REG_SS_THERM_STAT_SHIFT		1
+#define BQ24190_REG_SS_VSYS_STAT_MASK		BIT(0)
+#define BQ24190_REG_SS_VSYS_STAT_SHIFT		0
+
+#define BQ24190_REG_F		0x09 /* Fault */
+#define BQ24190_REG_F_WATCHDOG_FAULT_MASK	BIT(7)
+#define BQ24190_REG_F_WATCHDOG_FAULT_SHIFT	7
+#define BQ24190_REG_F_BOOST_FAULT_MASK		BIT(6)
+#define BQ24190_REG_F_BOOST_FAULT_SHIFT		6
+#define BQ24190_REG_F_CHRG_FAULT_MASK		(BIT(5) | BIT(4))
+#define BQ24190_REG_F_CHRG_FAULT_SHIFT		4
+#define BQ24190_REG_F_BAT_FAULT_MASK		BIT(3)
+#define BQ24190_REG_F_BAT_FAULT_SHIFT		3
+#define BQ24190_REG_F_NTC_FAULT_MASK		(BIT(2) | BIT(1) | BIT(0))
+#define BQ24190_REG_F_NTC_FAULT_SHIFT		0
+
+#define BQ24190_REG_VPRS	0x0A /* Vendor/Part/Revision Status */
+#define BQ24190_REG_VPRS_PN_MASK		(BIT(5) | BIT(4) | BIT(3))
+#define BQ24190_REG_VPRS_PN_SHIFT		3
+#define BQ24190_REG_VPRS_PN_24190			0x4
+#define BQ24190_REG_VPRS_PN_24192			0x5 /* Also 24193, 24196 */
+#define BQ24190_REG_VPRS_PN_24192I			0x3
+#define BQ24190_REG_VPRS_TS_PROFILE_MASK	BIT(2)
+#define BQ24190_REG_VPRS_TS_PROFILE_SHIFT	2
+#define BQ24190_REG_VPRS_DEV_REG_MASK		(BIT(1) | BIT(0))
+#define BQ24190_REG_VPRS_DEV_REG_SHIFT		0
+
+/*
+ * The FAULT register is latched by the bq24190 (except for NTC_FAULT)
+ * so the first read after a fault returns the latched value and subsequent
+ * reads return the current value.  In order to return the fault status
+ * to the user, have the interrupt handler save the reg's value and retrieve
+ * it in the appropriate health/status routine.
+ */
+struct bq24190_dev_info {
+	struct i2c_client		*client;
+	struct device			*dev;
+	struct extcon_dev		*edev;
+	struct power_supply		*charger;
+	struct power_supply		*battery;
+	struct delayed_work		input_current_limit_work;
+	char				model_name[I2C_NAME_SIZE];
+	bool				initialized;
+	bool				irq_event;
+	u16				sys_min;
+	u16				iprechg;
+	u16				iterm;
+	struct mutex			f_reg_lock;
+	u8				f_reg;
+	u8				ss_reg;
+	u8				watchdog;
+};
+
+static const unsigned int bq24190_usb_extcon_cable[] = {
+	EXTCON_USB,
+	EXTCON_NONE,
+};
+
+/*
+ * The tables below provide a 2-way mapping for the value that goes in
+ * the register field and the real-world value that it represents.
+ * The index of the array is the value that goes in the register; the
+ * number at that index in the array is the real-world value that it
+ * represents.
+ */
+
+/* REG00[2:0] (IINLIM) in uAh */
+static const int bq24190_isc_iinlim_values[] = {
+	 100000,  150000,  500000,  900000, 1200000, 1500000, 2000000, 3000000
+};
+
+/* REG02[7:2] (ICHG) in uAh */
+static const int bq24190_ccc_ichg_values[] = {
+	 512000,  576000,  640000,  704000,  768000,  832000,  896000,  960000,
+	1024000, 1088000, 1152000, 1216000, 1280000, 1344000, 1408000, 1472000,
+	1536000, 1600000, 1664000, 1728000, 1792000, 1856000, 1920000, 1984000,
+	2048000, 2112000, 2176000, 2240000, 2304000, 2368000, 2432000, 2496000,
+	2560000, 2624000, 2688000, 2752000, 2816000, 2880000, 2944000, 3008000,
+	3072000, 3136000, 3200000, 3264000, 3328000, 3392000, 3456000, 3520000,
+	3584000, 3648000, 3712000, 3776000, 3840000, 3904000, 3968000, 4032000,
+	4096000, 4160000, 4224000, 4288000, 4352000, 4416000, 4480000, 4544000
+};
+
+/* REG04[7:2] (VREG) in uV */
+static const int bq24190_cvc_vreg_values[] = {
+	3504000, 3520000, 3536000, 3552000, 3568000, 3584000, 3600000, 3616000,
+	3632000, 3648000, 3664000, 3680000, 3696000, 3712000, 3728000, 3744000,
+	3760000, 3776000, 3792000, 3808000, 3824000, 3840000, 3856000, 3872000,
+	3888000, 3904000, 3920000, 3936000, 3952000, 3968000, 3984000, 4000000,
+	4016000, 4032000, 4048000, 4064000, 4080000, 4096000, 4112000, 4128000,
+	4144000, 4160000, 4176000, 4192000, 4208000, 4224000, 4240000, 4256000,
+	4272000, 4288000, 4304000, 4320000, 4336000, 4352000, 4368000, 4384000,
+	4400000
+};
+
+/* REG06[1:0] (TREG) in tenths of degrees Celsius */
+static const int bq24190_ictrc_treg_values[] = {
+	600, 800, 1000, 1200
+};
+
+/*
+ * Return the index in 'tbl' of greatest value that is less than or equal to
+ * 'val'.  The index range returned is 0 to 'tbl_size' - 1.  Assumes that
+ * the values in 'tbl' are sorted from smallest to largest and 'tbl_size'
+ * is less than 2^8.
+ */
+static u8 bq24190_find_idx(const int tbl[], int tbl_size, int v)
+{
+	int i;
+
+	for (i = 1; i < tbl_size; i++)
+		if (v < tbl[i])
+			break;
+
+	return i - 1;
+}
+
+/* Basic driver I/O routines */
+
+static int bq24190_read(struct bq24190_dev_info *bdi, u8 reg, u8 *data)
+{
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(bdi->client, reg);
+	if (ret < 0)
+		return ret;
+
+	*data = ret;
+	return 0;
+}
+
+static int bq24190_write(struct bq24190_dev_info *bdi, u8 reg, u8 data)
+{
+	return i2c_smbus_write_byte_data(bdi->client, reg, data);
+}
+
+static int bq24190_read_mask(struct bq24190_dev_info *bdi, u8 reg,
+		u8 mask, u8 shift, u8 *data)
+{
+	u8 v;
+	int ret;
+
+	ret = bq24190_read(bdi, reg, &v);
+	if (ret < 0)
+		return ret;
+
+	v &= mask;
+	v >>= shift;
+	*data = v;
+
+	return 0;
+}
+
+static int bq24190_write_mask(struct bq24190_dev_info *bdi, u8 reg,
+		u8 mask, u8 shift, u8 data)
+{
+	u8 v;
+	int ret;
+
+	ret = bq24190_read(bdi, reg, &v);
+	if (ret < 0)
+		return ret;
+
+	v &= ~mask;
+	v |= ((data << shift) & mask);
+
+	return bq24190_write(bdi, reg, v);
+}
+
+static int bq24190_get_field_val(struct bq24190_dev_info *bdi,
+		u8 reg, u8 mask, u8 shift,
+		const int tbl[], int tbl_size,
+		int *val)
+{
+	u8 v;
+	int ret;
+
+	ret = bq24190_read_mask(bdi, reg, mask, shift, &v);
+	if (ret < 0)
+		return ret;
+
+	v = (v >= tbl_size) ? (tbl_size - 1) : v;
+	*val = tbl[v];
+
+	return 0;
+}
+
+static int bq24190_set_field_val(struct bq24190_dev_info *bdi,
+		u8 reg, u8 mask, u8 shift,
+		const int tbl[], int tbl_size,
+		int val)
+{
+	u8 idx;
+
+	idx = bq24190_find_idx(tbl, tbl_size, val);
+
+	return bq24190_write_mask(bdi, reg, mask, shift, idx);
+}
+
+#ifdef CONFIG_SYSFS
+/*
+ * There are a numerous options that are configurable on the bq24190
+ * that go well beyond what the power_supply properties provide access to.
+ * Provide sysfs access to them so they can be examined and possibly modified
+ * on the fly.  They will be provided for the charger power_supply object only
+ * and will be prefixed by 'f_' to make them easier to recognize.
+ */
+
+#define BQ24190_SYSFS_FIELD(_name, r, f, m, store)			\
+{									\
+	.attr	= __ATTR(f_##_name, m, bq24190_sysfs_show, store),	\
+	.reg	= BQ24190_REG_##r,					\
+	.mask	= BQ24190_REG_##r##_##f##_MASK,				\
+	.shift	= BQ24190_REG_##r##_##f##_SHIFT,			\
+}
+
+#define BQ24190_SYSFS_FIELD_RW(_name, r, f)				\
+		BQ24190_SYSFS_FIELD(_name, r, f, S_IWUSR | S_IRUGO,	\
+				bq24190_sysfs_store)
+
+#define BQ24190_SYSFS_FIELD_RO(_name, r, f)				\
+		BQ24190_SYSFS_FIELD(_name, r, f, S_IRUGO, NULL)
+
+static ssize_t bq24190_sysfs_show(struct device *dev,
+		struct device_attribute *attr, char *buf);
+static ssize_t bq24190_sysfs_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count);
+
+struct bq24190_sysfs_field_info {
+	struct device_attribute	attr;
+	u8	reg;
+	u8	mask;
+	u8	shift;
+};
+
+/* On i386 ptrace-abi.h defines SS that breaks the macro calls below. */
+#undef SS
+
+static struct bq24190_sysfs_field_info bq24190_sysfs_field_tbl[] = {
+			/*	sysfs name	reg	field in reg */
+	BQ24190_SYSFS_FIELD_RW(en_hiz,		ISC,	EN_HIZ),
+	BQ24190_SYSFS_FIELD_RW(vindpm,		ISC,	VINDPM),
+	BQ24190_SYSFS_FIELD_RW(iinlim,		ISC,	IINLIM),
+	BQ24190_SYSFS_FIELD_RW(chg_config,	POC,	CHG_CONFIG),
+	BQ24190_SYSFS_FIELD_RW(sys_min,		POC,	SYS_MIN),
+	BQ24190_SYSFS_FIELD_RW(boost_lim,	POC,	BOOST_LIM),
+	BQ24190_SYSFS_FIELD_RW(ichg,		CCC,	ICHG),
+	BQ24190_SYSFS_FIELD_RW(force_20_pct,	CCC,	FORCE_20PCT),
+	BQ24190_SYSFS_FIELD_RW(iprechg,		PCTCC,	IPRECHG),
+	BQ24190_SYSFS_FIELD_RW(iterm,		PCTCC,	ITERM),
+	BQ24190_SYSFS_FIELD_RW(vreg,		CVC,	VREG),
+	BQ24190_SYSFS_FIELD_RW(batlowv,		CVC,	BATLOWV),
+	BQ24190_SYSFS_FIELD_RW(vrechg,		CVC,	VRECHG),
+	BQ24190_SYSFS_FIELD_RW(en_term,		CTTC,	EN_TERM),
+	BQ24190_SYSFS_FIELD_RW(term_stat,	CTTC,	TERM_STAT),
+	BQ24190_SYSFS_FIELD_RO(watchdog,	CTTC,	WATCHDOG),
+	BQ24190_SYSFS_FIELD_RW(en_timer,	CTTC,	EN_TIMER),
+	BQ24190_SYSFS_FIELD_RW(chg_timer,	CTTC,	CHG_TIMER),
+	BQ24190_SYSFS_FIELD_RW(jeta_iset,	CTTC,	JEITA_ISET),
+	BQ24190_SYSFS_FIELD_RW(bat_comp,	ICTRC,	BAT_COMP),
+	BQ24190_SYSFS_FIELD_RW(vclamp,		ICTRC,	VCLAMP),
+	BQ24190_SYSFS_FIELD_RW(treg,		ICTRC,	TREG),
+	BQ24190_SYSFS_FIELD_RW(dpdm_en,		MOC,	DPDM_EN),
+	BQ24190_SYSFS_FIELD_RW(tmr2x_en,	MOC,	TMR2X_EN),
+	BQ24190_SYSFS_FIELD_RW(batfet_disable,	MOC,	BATFET_DISABLE),
+	BQ24190_SYSFS_FIELD_RW(jeita_vset,	MOC,	JEITA_VSET),
+	BQ24190_SYSFS_FIELD_RO(int_mask,	MOC,	INT_MASK),
+	BQ24190_SYSFS_FIELD_RO(vbus_stat,	SS,	VBUS_STAT),
+	BQ24190_SYSFS_FIELD_RO(chrg_stat,	SS,	CHRG_STAT),
+	BQ24190_SYSFS_FIELD_RO(dpm_stat,	SS,	DPM_STAT),
+	BQ24190_SYSFS_FIELD_RO(pg_stat,		SS,	PG_STAT),
+	BQ24190_SYSFS_FIELD_RO(therm_stat,	SS,	THERM_STAT),
+	BQ24190_SYSFS_FIELD_RO(vsys_stat,	SS,	VSYS_STAT),
+	BQ24190_SYSFS_FIELD_RO(watchdog_fault,	F,	WATCHDOG_FAULT),
+	BQ24190_SYSFS_FIELD_RO(boost_fault,	F,	BOOST_FAULT),
+	BQ24190_SYSFS_FIELD_RO(chrg_fault,	F,	CHRG_FAULT),
+	BQ24190_SYSFS_FIELD_RO(bat_fault,	F,	BAT_FAULT),
+	BQ24190_SYSFS_FIELD_RO(ntc_fault,	F,	NTC_FAULT),
+	BQ24190_SYSFS_FIELD_RO(pn,		VPRS,	PN),
+	BQ24190_SYSFS_FIELD_RO(ts_profile,	VPRS,	TS_PROFILE),
+	BQ24190_SYSFS_FIELD_RO(dev_reg,		VPRS,	DEV_REG),
+};
+
+static struct attribute *
+	bq24190_sysfs_attrs[ARRAY_SIZE(bq24190_sysfs_field_tbl) + 1];
+
+ATTRIBUTE_GROUPS(bq24190_sysfs);
+
+static void bq24190_sysfs_init_attrs(void)
+{
+	int i, limit = ARRAY_SIZE(bq24190_sysfs_field_tbl);
+
+	for (i = 0; i < limit; i++)
+		bq24190_sysfs_attrs[i] = &bq24190_sysfs_field_tbl[i].attr.attr;
+
+	bq24190_sysfs_attrs[limit] = NULL; /* Has additional entry for this */
+}
+
+static struct bq24190_sysfs_field_info *bq24190_sysfs_field_lookup(
+		const char *name)
+{
+	int i, limit = ARRAY_SIZE(bq24190_sysfs_field_tbl);
+
+	for (i = 0; i < limit; i++)
+		if (!strcmp(name, bq24190_sysfs_field_tbl[i].attr.attr.name))
+			break;
+
+	if (i >= limit)
+		return NULL;
+
+	return &bq24190_sysfs_field_tbl[i];
+}
+
+static ssize_t bq24190_sysfs_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct bq24190_dev_info *bdi = power_supply_get_drvdata(psy);
+	struct bq24190_sysfs_field_info *info;
+	ssize_t count;
+	int ret;
+	u8 v;
+
+	info = bq24190_sysfs_field_lookup(attr->attr.name);
+	if (!info)
+		return -EINVAL;
+
+	ret = pm_runtime_resume_and_get(bdi->dev);
+	if (ret < 0)
+		return ret;
+
+	ret = bq24190_read_mask(bdi, info->reg, info->mask, info->shift, &v);
+	if (ret)
+		count = ret;
+	else
+		count = scnprintf(buf, PAGE_SIZE, "%hhx\n", v);
+
+	pm_runtime_mark_last_busy(bdi->dev);
+	pm_runtime_put_autosuspend(bdi->dev);
+
+	return count;
+}
+
+static ssize_t bq24190_sysfs_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct bq24190_dev_info *bdi = power_supply_get_drvdata(psy);
+	struct bq24190_sysfs_field_info *info;
+	int ret;
+	u8 v;
+
+	info = bq24190_sysfs_field_lookup(attr->attr.name);
+	if (!info)
+		return -EINVAL;
+
+	ret = kstrtou8(buf, 0, &v);
+	if (ret < 0)
+		return ret;
+
+	ret = pm_runtime_resume_and_get(bdi->dev);
+	if (ret < 0)
+		return ret;
+
+	ret = bq24190_write_mask(bdi, info->reg, info->mask, info->shift, v);
+	if (ret)
+		count = ret;
+
+	pm_runtime_mark_last_busy(bdi->dev);
+	pm_runtime_put_autosuspend(bdi->dev);
+
+	return count;
+}
+#endif
+
+#ifdef CONFIG_REGULATOR
+static int bq24190_set_charge_mode(struct regulator_dev *dev, u8 val)
+{
+	struct bq24190_dev_info *bdi = rdev_get_drvdata(dev);
+	int ret;
+
+	ret = pm_runtime_resume_and_get(bdi->dev);
+	if (ret < 0) {
+		dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", ret);
+		return ret;
+	}
+
+	ret = bq24190_write_mask(bdi, BQ24190_REG_POC,
+				 BQ24190_REG_POC_CHG_CONFIG_MASK,
+				 BQ24190_REG_POC_CHG_CONFIG_SHIFT, val);
+
+	pm_runtime_mark_last_busy(bdi->dev);
+	pm_runtime_put_autosuspend(bdi->dev);
+
+	return ret;
+}
+
+static int bq24190_vbus_enable(struct regulator_dev *dev)
+{
+	return bq24190_set_charge_mode(dev, BQ24190_REG_POC_CHG_CONFIG_OTG);
+}
+
+static int bq24190_vbus_disable(struct regulator_dev *dev)
+{
+	return bq24190_set_charge_mode(dev, BQ24190_REG_POC_CHG_CONFIG_CHARGE);
+}
+
+static int bq24190_vbus_is_enabled(struct regulator_dev *dev)
+{
+	struct bq24190_dev_info *bdi = rdev_get_drvdata(dev);
+	int ret;
+	u8 val;
+
+	ret = pm_runtime_resume_and_get(bdi->dev);
+	if (ret < 0) {
+		dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", ret);
+		return ret;
+	}
+
+	ret = bq24190_read_mask(bdi, BQ24190_REG_POC,
+				BQ24190_REG_POC_CHG_CONFIG_MASK,
+				BQ24190_REG_POC_CHG_CONFIG_SHIFT, &val);
+
+	pm_runtime_mark_last_busy(bdi->dev);
+	pm_runtime_put_autosuspend(bdi->dev);
+
+	if (ret)
+		return ret;
+
+	return (val == BQ24190_REG_POC_CHG_CONFIG_OTG ||
+		val == BQ24190_REG_POC_CHG_CONFIG_OTG_ALT);
+}
+
+static const struct regulator_ops bq24190_vbus_ops = {
+	.enable = bq24190_vbus_enable,
+	.disable = bq24190_vbus_disable,
+	.is_enabled = bq24190_vbus_is_enabled,
+};
+
+static const struct regulator_desc bq24190_vbus_desc = {
+	.name = "usb_otg_vbus",
+	.of_match = "usb-otg-vbus",
+	.type = REGULATOR_VOLTAGE,
+	.owner = THIS_MODULE,
+	.ops = &bq24190_vbus_ops,
+	.fixed_uV = 5000000,
+	.n_voltages = 1,
+};
+
+static const struct regulator_init_data bq24190_vbus_init_data = {
+	.constraints = {
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static int bq24190_register_vbus_regulator(struct bq24190_dev_info *bdi)
+{
+	struct bq24190_platform_data *pdata = bdi->dev->platform_data;
+	struct regulator_config cfg = { };
+	struct regulator_dev *reg;
+	int ret = 0;
+
+	cfg.dev = bdi->dev;
+	if (pdata && pdata->regulator_init_data)
+		cfg.init_data = pdata->regulator_init_data;
+	else
+		cfg.init_data = &bq24190_vbus_init_data;
+	cfg.driver_data = bdi;
+	reg = devm_regulator_register(bdi->dev, &bq24190_vbus_desc, &cfg);
+	if (IS_ERR(reg)) {
+		ret = PTR_ERR(reg);
+		dev_err(bdi->dev, "Can't register regulator: %d\n", ret);
+	}
+
+	return ret;
+}
+#else
+static int bq24190_register_vbus_regulator(struct bq24190_dev_info *bdi)
+{
+	return 0;
+}
+#endif
+
+static int bq24190_set_config(struct bq24190_dev_info *bdi)
+{
+	int ret;
+	u8 v;
+
+	ret = bq24190_read(bdi, BQ24190_REG_CTTC, &v);
+	if (ret < 0)
+		return ret;
+
+	bdi->watchdog = ((v & BQ24190_REG_CTTC_WATCHDOG_MASK) >>
+					BQ24190_REG_CTTC_WATCHDOG_SHIFT);
+
+	/*
+	 * According to the "Host Mode and default Mode" section of the
+	 * manual, a write to any register causes the bq24190 to switch
+	 * from default mode to host mode.  It will switch back to default
+	 * mode after a WDT timeout unless the WDT is turned off as well.
+	 * So, by simply turning off the WDT, we accomplish both with the
+	 * same write.
+	 */
+	v &= ~BQ24190_REG_CTTC_WATCHDOG_MASK;
+
+	ret = bq24190_write(bdi, BQ24190_REG_CTTC, v);
+	if (ret < 0)
+		return ret;
+
+	if (bdi->sys_min) {
+		v = bdi->sys_min / 100 - 30; // manual section 9.5.1.2, table 9
+		ret = bq24190_write_mask(bdi, BQ24190_REG_POC,
+					 BQ24190_REG_POC_SYS_MIN_MASK,
+					 BQ24190_REG_POC_SYS_MIN_SHIFT,
+					 v);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (bdi->iprechg) {
+		v = bdi->iprechg / 128 - 1; // manual section 9.5.1.4, table 11
+		ret = bq24190_write_mask(bdi, BQ24190_REG_PCTCC,
+					 BQ24190_REG_PCTCC_IPRECHG_MASK,
+					 BQ24190_REG_PCTCC_IPRECHG_SHIFT,
+					 v);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (bdi->iterm) {
+		v = bdi->iterm / 128 - 1; // manual section 9.5.1.4, table 11
+		ret = bq24190_write_mask(bdi, BQ24190_REG_PCTCC,
+					 BQ24190_REG_PCTCC_ITERM_MASK,
+					 BQ24190_REG_PCTCC_ITERM_SHIFT,
+					 v);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int bq24190_register_reset(struct bq24190_dev_info *bdi)
+{
+	int ret, limit = 100;
+	u8 v;
+
+	/*
+	 * This prop. can be passed on device instantiation from platform code:
+	 * struct property_entry pe[] =
+	 *   { PROPERTY_ENTRY_BOOL("disable-reset"), ... };
+	 * struct i2c_board_info bi =
+	 *   { .type = "bq24190", .addr = 0x6b, .properties = pe, .irq = irq };
+	 * struct i2c_adapter ad = { ... };
+	 * i2c_add_adapter(&ad);
+	 * i2c_new_client_device(&ad, &bi);
+	 */
+	if (device_property_read_bool(bdi->dev, "disable-reset"))
+		return 0;
+
+	/* Reset the registers */
+	ret = bq24190_write_mask(bdi, BQ24190_REG_POC,
+			BQ24190_REG_POC_RESET_MASK,
+			BQ24190_REG_POC_RESET_SHIFT,
+			0x1);
+	if (ret < 0)
+		return ret;
+
+	/* Reset bit will be cleared by hardware so poll until it is */
+	do {
+		ret = bq24190_read_mask(bdi, BQ24190_REG_POC,
+				BQ24190_REG_POC_RESET_MASK,
+				BQ24190_REG_POC_RESET_SHIFT,
+				&v);
+		if (ret < 0)
+			return ret;
+
+		if (v == 0)
+			return 0;
+
+		usleep_range(100, 200);
+	} while (--limit);
+
+	return -EIO;
+}
+
+/* Charger power supply property routines */
+
+static int bq24190_charger_get_charge_type(struct bq24190_dev_info *bdi,
+		union power_supply_propval *val)
+{
+	u8 v;
+	int type, ret;
+
+	ret = bq24190_read_mask(bdi, BQ24190_REG_POC,
+			BQ24190_REG_POC_CHG_CONFIG_MASK,
+			BQ24190_REG_POC_CHG_CONFIG_SHIFT,
+			&v);
+	if (ret < 0)
+		return ret;
+
+	/* If POC[CHG_CONFIG] (REG01[5:4]) == 0, charge is disabled */
+	if (!v) {
+		type = POWER_SUPPLY_CHARGE_TYPE_NONE;
+	} else {
+		ret = bq24190_read_mask(bdi, BQ24190_REG_CCC,
+				BQ24190_REG_CCC_FORCE_20PCT_MASK,
+				BQ24190_REG_CCC_FORCE_20PCT_SHIFT,
+				&v);
+		if (ret < 0)
+			return ret;
+
+		type = (v) ? POWER_SUPPLY_CHARGE_TYPE_TRICKLE :
+			     POWER_SUPPLY_CHARGE_TYPE_FAST;
+	}
+
+	val->intval = type;
+
+	return 0;
+}
+
+static int bq24190_charger_set_charge_type(struct bq24190_dev_info *bdi,
+		const union power_supply_propval *val)
+{
+	u8 chg_config, force_20pct, en_term;
+	int ret;
+
+	/*
+	 * According to the "Termination when REG02[0] = 1" section of
+	 * the bq24190 manual, the trickle charge could be less than the
+	 * termination current so it recommends turning off the termination
+	 * function.
+	 *
+	 * Note: AFAICT from the datasheet, the user will have to manually
+	 * turn off the charging when in 20% mode.  If its not turned off,
+	 * there could be battery damage.  So, use this mode at your own risk.
+	 */
+	switch (val->intval) {
+	case POWER_SUPPLY_CHARGE_TYPE_NONE:
+		chg_config = 0x0;
+		break;
+	case POWER_SUPPLY_CHARGE_TYPE_TRICKLE:
+		chg_config = 0x1;
+		force_20pct = 0x1;
+		en_term = 0x0;
+		break;
+	case POWER_SUPPLY_CHARGE_TYPE_FAST:
+		chg_config = 0x1;
+		force_20pct = 0x0;
+		en_term = 0x1;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (chg_config) { /* Enabling the charger */
+		ret = bq24190_write_mask(bdi, BQ24190_REG_CCC,
+				BQ24190_REG_CCC_FORCE_20PCT_MASK,
+				BQ24190_REG_CCC_FORCE_20PCT_SHIFT,
+				force_20pct);
+		if (ret < 0)
+			return ret;
+
+		ret = bq24190_write_mask(bdi, BQ24190_REG_CTTC,
+				BQ24190_REG_CTTC_EN_TERM_MASK,
+				BQ24190_REG_CTTC_EN_TERM_SHIFT,
+				en_term);
+		if (ret < 0)
+			return ret;
+	}
+
+	return bq24190_write_mask(bdi, BQ24190_REG_POC,
+			BQ24190_REG_POC_CHG_CONFIG_MASK,
+			BQ24190_REG_POC_CHG_CONFIG_SHIFT, chg_config);
+}
+
+static int bq24190_charger_get_health(struct bq24190_dev_info *bdi,
+		union power_supply_propval *val)
+{
+	u8 v;
+	int health;
+
+	mutex_lock(&bdi->f_reg_lock);
+	v = bdi->f_reg;
+	mutex_unlock(&bdi->f_reg_lock);
+
+	if (v & BQ24190_REG_F_NTC_FAULT_MASK) {
+		switch (v >> BQ24190_REG_F_NTC_FAULT_SHIFT & 0x7) {
+		case 0x1: /* TS1  Cold */
+		case 0x3: /* TS2  Cold */
+		case 0x5: /* Both Cold */
+			health = POWER_SUPPLY_HEALTH_COLD;
+			break;
+		case 0x2: /* TS1  Hot */
+		case 0x4: /* TS2  Hot */
+		case 0x6: /* Both Hot */
+			health = POWER_SUPPLY_HEALTH_OVERHEAT;
+			break;
+		default:
+			health = POWER_SUPPLY_HEALTH_UNKNOWN;
+		}
+	} else if (v & BQ24190_REG_F_BAT_FAULT_MASK) {
+		health = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+	} else if (v & BQ24190_REG_F_CHRG_FAULT_MASK) {
+		switch (v >> BQ24190_REG_F_CHRG_FAULT_SHIFT & 0x3) {
+		case 0x1: /* Input Fault (VBUS OVP or VBAT<VBUS<3.8V) */
+			/*
+			 * This could be over-voltage or under-voltage
+			 * and there's no way to tell which.  Instead
+			 * of looking foolish and returning 'OVERVOLTAGE'
+			 * when its really under-voltage, just return
+			 * 'UNSPEC_FAILURE'.
+			 */
+			health = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+			break;
+		case 0x2: /* Thermal Shutdown */
+			health = POWER_SUPPLY_HEALTH_OVERHEAT;
+			break;
+		case 0x3: /* Charge Safety Timer Expiration */
+			health = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE;
+			break;
+		default:  /* prevent compiler warning */
+			health = -1;
+		}
+	} else if (v & BQ24190_REG_F_BOOST_FAULT_MASK) {
+		/*
+		 * This could be over-current or over-voltage but there's
+		 * no way to tell which.  Return 'OVERVOLTAGE' since there
+		 * isn't an 'OVERCURRENT' value defined that we can return
+		 * even if it was over-current.
+		 */
+		health = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+	} else {
+		health = POWER_SUPPLY_HEALTH_GOOD;
+	}
+
+	val->intval = health;
+
+	return 0;
+}
+
+static int bq24190_charger_get_online(struct bq24190_dev_info *bdi,
+		union power_supply_propval *val)
+{
+	u8 pg_stat, batfet_disable;
+	int ret;
+
+	ret = bq24190_read_mask(bdi, BQ24190_REG_SS,
+			BQ24190_REG_SS_PG_STAT_MASK,
+			BQ24190_REG_SS_PG_STAT_SHIFT, &pg_stat);
+	if (ret < 0)
+		return ret;
+
+	ret = bq24190_read_mask(bdi, BQ24190_REG_MOC,
+			BQ24190_REG_MOC_BATFET_DISABLE_MASK,
+			BQ24190_REG_MOC_BATFET_DISABLE_SHIFT, &batfet_disable);
+	if (ret < 0)
+		return ret;
+
+	val->intval = pg_stat && !batfet_disable;
+
+	return 0;
+}
+
+static int bq24190_battery_set_online(struct bq24190_dev_info *bdi,
+				      const union power_supply_propval *val);
+static int bq24190_battery_get_status(struct bq24190_dev_info *bdi,
+				      union power_supply_propval *val);
+static int bq24190_battery_get_temp_alert_max(struct bq24190_dev_info *bdi,
+					      union power_supply_propval *val);
+static int bq24190_battery_set_temp_alert_max(struct bq24190_dev_info *bdi,
+					      const union power_supply_propval *val);
+
+static int bq24190_charger_set_online(struct bq24190_dev_info *bdi,
+				      const union power_supply_propval *val)
+{
+	return bq24190_battery_set_online(bdi, val);
+}
+
+static int bq24190_charger_get_status(struct bq24190_dev_info *bdi,
+				      union power_supply_propval *val)
+{
+	return bq24190_battery_get_status(bdi, val);
+}
+
+static int bq24190_charger_get_temp_alert_max(struct bq24190_dev_info *bdi,
+					      union power_supply_propval *val)
+{
+	return bq24190_battery_get_temp_alert_max(bdi, val);
+}
+
+static int bq24190_charger_set_temp_alert_max(struct bq24190_dev_info *bdi,
+					      const union power_supply_propval *val)
+{
+	return bq24190_battery_set_temp_alert_max(bdi, val);
+}
+
+static int bq24190_charger_get_precharge(struct bq24190_dev_info *bdi,
+		union power_supply_propval *val)
+{
+	u8 v;
+	int ret;
+
+	ret = bq24190_read_mask(bdi, BQ24190_REG_PCTCC,
+			BQ24190_REG_PCTCC_IPRECHG_MASK,
+			BQ24190_REG_PCTCC_IPRECHG_SHIFT, &v);
+	if (ret < 0)
+		return ret;
+
+	val->intval = ++v * 128 * 1000;
+	return 0;
+}
+
+static int bq24190_charger_get_charge_term(struct bq24190_dev_info *bdi,
+		union power_supply_propval *val)
+{
+	u8 v;
+	int ret;
+
+	ret = bq24190_read_mask(bdi, BQ24190_REG_PCTCC,
+			BQ24190_REG_PCTCC_ITERM_MASK,
+			BQ24190_REG_PCTCC_ITERM_SHIFT, &v);
+	if (ret < 0)
+		return ret;
+
+	val->intval = ++v * 128 * 1000;
+	return 0;
+}
+
+static int bq24190_charger_get_current(struct bq24190_dev_info *bdi,
+		union power_supply_propval *val)
+{
+	u8 v;
+	int curr, ret;
+
+	ret = bq24190_get_field_val(bdi, BQ24190_REG_CCC,
+			BQ24190_REG_CCC_ICHG_MASK, BQ24190_REG_CCC_ICHG_SHIFT,
+			bq24190_ccc_ichg_values,
+			ARRAY_SIZE(bq24190_ccc_ichg_values), &curr);
+	if (ret < 0)
+		return ret;
+
+	ret = bq24190_read_mask(bdi, BQ24190_REG_CCC,
+			BQ24190_REG_CCC_FORCE_20PCT_MASK,
+			BQ24190_REG_CCC_FORCE_20PCT_SHIFT, &v);
+	if (ret < 0)
+		return ret;
+
+	/* If FORCE_20PCT is enabled, then current is 20% of ICHG value */
+	if (v)
+		curr /= 5;
+
+	val->intval = curr;
+	return 0;
+}
+
+static int bq24190_charger_get_current_max(struct bq24190_dev_info *bdi,
+		union power_supply_propval *val)
+{
+	int idx = ARRAY_SIZE(bq24190_ccc_ichg_values) - 1;
+
+	val->intval = bq24190_ccc_ichg_values[idx];
+	return 0;
+}
+
+static int bq24190_charger_set_current(struct bq24190_dev_info *bdi,
+		const union power_supply_propval *val)
+{
+	u8 v;
+	int ret, curr = val->intval;
+
+	ret = bq24190_read_mask(bdi, BQ24190_REG_CCC,
+			BQ24190_REG_CCC_FORCE_20PCT_MASK,
+			BQ24190_REG_CCC_FORCE_20PCT_SHIFT, &v);
+	if (ret < 0)
+		return ret;
+
+	/* If FORCE_20PCT is enabled, have to multiply value passed in by 5 */
+	if (v)
+		curr *= 5;
+
+	return bq24190_set_field_val(bdi, BQ24190_REG_CCC,
+			BQ24190_REG_CCC_ICHG_MASK, BQ24190_REG_CCC_ICHG_SHIFT,
+			bq24190_ccc_ichg_values,
+			ARRAY_SIZE(bq24190_ccc_ichg_values), curr);
+}
+
+static int bq24190_charger_get_voltage(struct bq24190_dev_info *bdi,
+		union power_supply_propval *val)
+{
+	int voltage, ret;
+
+	ret = bq24190_get_field_val(bdi, BQ24190_REG_CVC,
+			BQ24190_REG_CVC_VREG_MASK, BQ24190_REG_CVC_VREG_SHIFT,
+			bq24190_cvc_vreg_values,
+			ARRAY_SIZE(bq24190_cvc_vreg_values), &voltage);
+	if (ret < 0)
+		return ret;
+
+	val->intval = voltage;
+	return 0;
+}
+
+static int bq24190_charger_get_voltage_max(struct bq24190_dev_info *bdi,
+		union power_supply_propval *val)
+{
+	int idx = ARRAY_SIZE(bq24190_cvc_vreg_values) - 1;
+
+	val->intval = bq24190_cvc_vreg_values[idx];
+	return 0;
+}
+
+static int bq24190_charger_set_voltage(struct bq24190_dev_info *bdi,
+		const union power_supply_propval *val)
+{
+	return bq24190_set_field_val(bdi, BQ24190_REG_CVC,
+			BQ24190_REG_CVC_VREG_MASK, BQ24190_REG_CVC_VREG_SHIFT,
+			bq24190_cvc_vreg_values,
+			ARRAY_SIZE(bq24190_cvc_vreg_values), val->intval);
+}
+
+static int bq24190_charger_get_iinlimit(struct bq24190_dev_info *bdi,
+		union power_supply_propval *val)
+{
+	int iinlimit, ret;
+
+	ret = bq24190_get_field_val(bdi, BQ24190_REG_ISC,
+			BQ24190_REG_ISC_IINLIM_MASK,
+			BQ24190_REG_ISC_IINLIM_SHIFT,
+			bq24190_isc_iinlim_values,
+			ARRAY_SIZE(bq24190_isc_iinlim_values), &iinlimit);
+	if (ret < 0)
+		return ret;
+
+	val->intval = iinlimit;
+	return 0;
+}
+
+static int bq24190_charger_set_iinlimit(struct bq24190_dev_info *bdi,
+		const union power_supply_propval *val)
+{
+	return bq24190_set_field_val(bdi, BQ24190_REG_ISC,
+			BQ24190_REG_ISC_IINLIM_MASK,
+			BQ24190_REG_ISC_IINLIM_SHIFT,
+			bq24190_isc_iinlim_values,
+			ARRAY_SIZE(bq24190_isc_iinlim_values), val->intval);
+}
+
+static int bq24190_charger_get_property(struct power_supply *psy,
+		enum power_supply_property psp, union power_supply_propval *val)
+{
+	struct bq24190_dev_info *bdi = power_supply_get_drvdata(psy);
+	int ret;
+
+	dev_dbg(bdi->dev, "prop: %d\n", psp);
+
+	ret = pm_runtime_resume_and_get(bdi->dev);
+	if (ret < 0)
+		return ret;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CHARGE_TYPE:
+		ret = bq24190_charger_get_charge_type(bdi, val);
+		break;
+	case POWER_SUPPLY_PROP_HEALTH:
+		ret = bq24190_charger_get_health(bdi, val);
+		break;
+	case POWER_SUPPLY_PROP_ONLINE:
+		ret = bq24190_charger_get_online(bdi, val);
+		break;
+	case POWER_SUPPLY_PROP_STATUS:
+		ret = bq24190_charger_get_status(bdi, val);
+		break;
+	case POWER_SUPPLY_PROP_TEMP_ALERT_MAX:
+		ret =  bq24190_charger_get_temp_alert_max(bdi, val);
+		break;
+	case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
+		ret = bq24190_charger_get_precharge(bdi, val);
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
+		ret = bq24190_charger_get_charge_term(bdi, val);
+		break;
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+		ret = bq24190_charger_get_current(bdi, val);
+		break;
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+		ret = bq24190_charger_get_current_max(bdi, val);
+		break;
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+		ret = bq24190_charger_get_voltage(bdi, val);
+		break;
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
+		ret = bq24190_charger_get_voltage_max(bdi, val);
+		break;
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		ret = bq24190_charger_get_iinlimit(bdi, val);
+		break;
+	case POWER_SUPPLY_PROP_SCOPE:
+		val->intval = POWER_SUPPLY_SCOPE_SYSTEM;
+		ret = 0;
+		break;
+	case POWER_SUPPLY_PROP_MODEL_NAME:
+		val->strval = bdi->model_name;
+		ret = 0;
+		break;
+	case POWER_SUPPLY_PROP_MANUFACTURER:
+		val->strval = BQ24190_MANUFACTURER;
+		ret = 0;
+		break;
+	default:
+		ret = -ENODATA;
+	}
+
+	pm_runtime_mark_last_busy(bdi->dev);
+	pm_runtime_put_autosuspend(bdi->dev);
+
+	return ret;
+}
+
+static int bq24190_charger_set_property(struct power_supply *psy,
+		enum power_supply_property psp,
+		const union power_supply_propval *val)
+{
+	struct bq24190_dev_info *bdi = power_supply_get_drvdata(psy);
+	int ret;
+
+	dev_dbg(bdi->dev, "prop: %d\n", psp);
+
+	ret = pm_runtime_resume_and_get(bdi->dev);
+	if (ret < 0)
+		return ret;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		ret = bq24190_charger_set_online(bdi, val);
+		break;
+	case POWER_SUPPLY_PROP_TEMP_ALERT_MAX:
+		ret = bq24190_charger_set_temp_alert_max(bdi, val);
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_TYPE:
+		ret = bq24190_charger_set_charge_type(bdi, val);
+		break;
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+		ret = bq24190_charger_set_current(bdi, val);
+		break;
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+		ret = bq24190_charger_set_voltage(bdi, val);
+		break;
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		ret = bq24190_charger_set_iinlimit(bdi, val);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	pm_runtime_mark_last_busy(bdi->dev);
+	pm_runtime_put_autosuspend(bdi->dev);
+
+	return ret;
+}
+
+static int bq24190_charger_property_is_writeable(struct power_supply *psy,
+		enum power_supply_property psp)
+{
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+	case POWER_SUPPLY_PROP_TEMP_ALERT_MAX:
+	case POWER_SUPPLY_PROP_CHARGE_TYPE:
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		return 1;
+	default:
+		return 0;
+	}
+}
+
+static void bq24190_input_current_limit_work(struct work_struct *work)
+{
+	struct bq24190_dev_info *bdi =
+		container_of(work, struct bq24190_dev_info,
+			     input_current_limit_work.work);
+	union power_supply_propval val;
+	int ret;
+
+	ret = power_supply_get_property_from_supplier(bdi->charger,
+						      POWER_SUPPLY_PROP_CURRENT_MAX,
+						      &val);
+	if (ret)
+		return;
+
+	bq24190_charger_set_property(bdi->charger,
+				     POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
+				     &val);
+	power_supply_changed(bdi->charger);
+}
+
+/* Sync the input-current-limit with our parent supply (if we have one) */
+static void bq24190_charger_external_power_changed(struct power_supply *psy)
+{
+	struct bq24190_dev_info *bdi = power_supply_get_drvdata(psy);
+
+	/*
+	 * The Power-Good detection may take up to 220ms, sometimes
+	 * the external charger detection is quicker, and the bq24190 will
+	 * reset to iinlim based on its own charger detection (which is not
+	 * hooked up when using external charger detection) resulting in a
+	 * too low default 500mA iinlim. Delay setting the input-current-limit
+	 * for 300ms to avoid this.
+	 */
+	queue_delayed_work(system_wq, &bdi->input_current_limit_work,
+			   msecs_to_jiffies(300));
+}
+
+static enum power_supply_property bq24190_charger_properties[] = {
+	POWER_SUPPLY_PROP_CHARGE_TYPE,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_TEMP_ALERT_MAX,
+	POWER_SUPPLY_PROP_PRECHARGE_CURRENT,
+	POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
+	POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
+	POWER_SUPPLY_PROP_SCOPE,
+	POWER_SUPPLY_PROP_MODEL_NAME,
+	POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
+static char *bq24190_charger_supplied_to[] = {
+	"main-battery",
+};
+
+static const struct power_supply_desc bq24190_charger_desc = {
+	.name			= "bq24190-charger",
+	.type			= POWER_SUPPLY_TYPE_USB,
+	.properties		= bq24190_charger_properties,
+	.num_properties		= ARRAY_SIZE(bq24190_charger_properties),
+	.get_property		= bq24190_charger_get_property,
+	.set_property		= bq24190_charger_set_property,
+	.property_is_writeable	= bq24190_charger_property_is_writeable,
+	.external_power_changed	= bq24190_charger_external_power_changed,
+};
+
+/* Battery power supply property routines */
+
+static int bq24190_battery_get_status(struct bq24190_dev_info *bdi,
+		union power_supply_propval *val)
+{
+	u8 ss_reg, chrg_fault;
+	int status, ret;
+
+	mutex_lock(&bdi->f_reg_lock);
+	chrg_fault = bdi->f_reg;
+	mutex_unlock(&bdi->f_reg_lock);
+
+	chrg_fault &= BQ24190_REG_F_CHRG_FAULT_MASK;
+	chrg_fault >>= BQ24190_REG_F_CHRG_FAULT_SHIFT;
+
+	ret = bq24190_read(bdi, BQ24190_REG_SS, &ss_reg);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * The battery must be discharging when any of these are true:
+	 * - there is no good power source;
+	 * - there is a charge fault.
+	 * Could also be discharging when in "supplement mode" but
+	 * there is no way to tell when its in that mode.
+	 */
+	if (!(ss_reg & BQ24190_REG_SS_PG_STAT_MASK) || chrg_fault) {
+		status = POWER_SUPPLY_STATUS_DISCHARGING;
+	} else {
+		ss_reg &= BQ24190_REG_SS_CHRG_STAT_MASK;
+		ss_reg >>= BQ24190_REG_SS_CHRG_STAT_SHIFT;
+
+		switch (ss_reg) {
+		case 0x0: /* Not Charging */
+			status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+			break;
+		case 0x1: /* Pre-charge */
+		case 0x2: /* Fast Charging */
+			status = POWER_SUPPLY_STATUS_CHARGING;
+			break;
+		case 0x3: /* Charge Termination Done */
+			status = POWER_SUPPLY_STATUS_FULL;
+			break;
+		default:
+			ret = -EIO;
+		}
+	}
+
+	if (!ret)
+		val->intval = status;
+
+	return ret;
+}
+
+static int bq24190_battery_get_health(struct bq24190_dev_info *bdi,
+		union power_supply_propval *val)
+{
+	u8 v;
+	int health;
+
+	mutex_lock(&bdi->f_reg_lock);
+	v = bdi->f_reg;
+	mutex_unlock(&bdi->f_reg_lock);
+
+	if (v & BQ24190_REG_F_BAT_FAULT_MASK) {
+		health = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+	} else {
+		v &= BQ24190_REG_F_NTC_FAULT_MASK;
+		v >>= BQ24190_REG_F_NTC_FAULT_SHIFT;
+
+		switch (v) {
+		case 0x0: /* Normal */
+			health = POWER_SUPPLY_HEALTH_GOOD;
+			break;
+		case 0x1: /* TS1 Cold */
+		case 0x3: /* TS2 Cold */
+		case 0x5: /* Both Cold */
+			health = POWER_SUPPLY_HEALTH_COLD;
+			break;
+		case 0x2: /* TS1 Hot */
+		case 0x4: /* TS2 Hot */
+		case 0x6: /* Both Hot */
+			health = POWER_SUPPLY_HEALTH_OVERHEAT;
+			break;
+		default:
+			health = POWER_SUPPLY_HEALTH_UNKNOWN;
+		}
+	}
+
+	val->intval = health;
+	return 0;
+}
+
+static int bq24190_battery_get_online(struct bq24190_dev_info *bdi,
+		union power_supply_propval *val)
+{
+	u8 batfet_disable;
+	int ret;
+
+	ret = bq24190_read_mask(bdi, BQ24190_REG_MOC,
+			BQ24190_REG_MOC_BATFET_DISABLE_MASK,
+			BQ24190_REG_MOC_BATFET_DISABLE_SHIFT, &batfet_disable);
+	if (ret < 0)
+		return ret;
+
+	val->intval = !batfet_disable;
+	return 0;
+}
+
+static int bq24190_battery_set_online(struct bq24190_dev_info *bdi,
+		const union power_supply_propval *val)
+{
+	return bq24190_write_mask(bdi, BQ24190_REG_MOC,
+			BQ24190_REG_MOC_BATFET_DISABLE_MASK,
+			BQ24190_REG_MOC_BATFET_DISABLE_SHIFT, !val->intval);
+}
+
+static int bq24190_battery_get_temp_alert_max(struct bq24190_dev_info *bdi,
+		union power_supply_propval *val)
+{
+	int temp, ret;
+
+	ret = bq24190_get_field_val(bdi, BQ24190_REG_ICTRC,
+			BQ24190_REG_ICTRC_TREG_MASK,
+			BQ24190_REG_ICTRC_TREG_SHIFT,
+			bq24190_ictrc_treg_values,
+			ARRAY_SIZE(bq24190_ictrc_treg_values), &temp);
+	if (ret < 0)
+		return ret;
+
+	val->intval = temp;
+	return 0;
+}
+
+static int bq24190_battery_set_temp_alert_max(struct bq24190_dev_info *bdi,
+		const union power_supply_propval *val)
+{
+	return bq24190_set_field_val(bdi, BQ24190_REG_ICTRC,
+			BQ24190_REG_ICTRC_TREG_MASK,
+			BQ24190_REG_ICTRC_TREG_SHIFT,
+			bq24190_ictrc_treg_values,
+			ARRAY_SIZE(bq24190_ictrc_treg_values), val->intval);
+}
+
+static int bq24190_battery_get_property(struct power_supply *psy,
+		enum power_supply_property psp, union power_supply_propval *val)
+{
+	struct bq24190_dev_info *bdi = power_supply_get_drvdata(psy);
+	int ret;
+
+	dev_warn(bdi->dev, "warning: /sys/class/power_supply/bq24190-battery is deprecated\n");
+	dev_dbg(bdi->dev, "prop: %d\n", psp);
+
+	ret = pm_runtime_resume_and_get(bdi->dev);
+	if (ret < 0)
+		return ret;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		ret = bq24190_battery_get_status(bdi, val);
+		break;
+	case POWER_SUPPLY_PROP_HEALTH:
+		ret = bq24190_battery_get_health(bdi, val);
+		break;
+	case POWER_SUPPLY_PROP_ONLINE:
+		ret = bq24190_battery_get_online(bdi, val);
+		break;
+	case POWER_SUPPLY_PROP_TECHNOLOGY:
+		/* Could be Li-on or Li-polymer but no way to tell which */
+		val->intval = POWER_SUPPLY_TECHNOLOGY_UNKNOWN;
+		ret = 0;
+		break;
+	case POWER_SUPPLY_PROP_TEMP_ALERT_MAX:
+		ret = bq24190_battery_get_temp_alert_max(bdi, val);
+		break;
+	case POWER_SUPPLY_PROP_SCOPE:
+		val->intval = POWER_SUPPLY_SCOPE_SYSTEM;
+		ret = 0;
+		break;
+	default:
+		ret = -ENODATA;
+	}
+
+	pm_runtime_mark_last_busy(bdi->dev);
+	pm_runtime_put_autosuspend(bdi->dev);
+
+	return ret;
+}
+
+static int bq24190_battery_set_property(struct power_supply *psy,
+		enum power_supply_property psp,
+		const union power_supply_propval *val)
+{
+	struct bq24190_dev_info *bdi = power_supply_get_drvdata(psy);
+	int ret;
+
+	dev_warn(bdi->dev, "warning: /sys/class/power_supply/bq24190-battery is deprecated\n");
+	dev_dbg(bdi->dev, "prop: %d\n", psp);
+
+	ret = pm_runtime_resume_and_get(bdi->dev);
+	if (ret < 0)
+		return ret;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		ret = bq24190_battery_set_online(bdi, val);
+		break;
+	case POWER_SUPPLY_PROP_TEMP_ALERT_MAX:
+		ret = bq24190_battery_set_temp_alert_max(bdi, val);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	pm_runtime_mark_last_busy(bdi->dev);
+	pm_runtime_put_autosuspend(bdi->dev);
+
+	return ret;
+}
+
+static int bq24190_battery_property_is_writeable(struct power_supply *psy,
+		enum power_supply_property psp)
+{
+	int ret;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+	case POWER_SUPPLY_PROP_TEMP_ALERT_MAX:
+		ret = 1;
+		break;
+	default:
+		ret = 0;
+	}
+
+	return ret;
+}
+
+static enum power_supply_property bq24190_battery_properties[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_TEMP_ALERT_MAX,
+	POWER_SUPPLY_PROP_SCOPE,
+};
+
+static const struct power_supply_desc bq24190_battery_desc = {
+	.name			= "bq24190-battery",
+	.type			= POWER_SUPPLY_TYPE_BATTERY,
+	.properties		= bq24190_battery_properties,
+	.num_properties		= ARRAY_SIZE(bq24190_battery_properties),
+	.get_property		= bq24190_battery_get_property,
+	.set_property		= bq24190_battery_set_property,
+	.property_is_writeable	= bq24190_battery_property_is_writeable,
+};
+
+static int bq24190_configure_usb_otg(struct bq24190_dev_info *bdi, u8 ss_reg)
+{
+	bool otg_enabled;
+	int ret;
+
+	otg_enabled = !!(ss_reg & BQ24190_REG_SS_VBUS_STAT_MASK);
+	ret = extcon_set_state_sync(bdi->edev, EXTCON_USB, otg_enabled);
+	if (ret < 0)
+		dev_err(bdi->dev, "Can't set extcon state to %d: %d\n",
+			otg_enabled, ret);
+
+	return ret;
+}
+
+static void bq24190_check_status(struct bq24190_dev_info *bdi)
+{
+	const u8 battery_mask_ss = BQ24190_REG_SS_CHRG_STAT_MASK;
+	const u8 battery_mask_f = BQ24190_REG_F_BAT_FAULT_MASK
+				| BQ24190_REG_F_NTC_FAULT_MASK;
+	bool alert_charger = false, alert_battery = false;
+	u8 ss_reg = 0, f_reg = 0;
+	int i, ret;
+
+	ret = bq24190_read(bdi, BQ24190_REG_SS, &ss_reg);
+	if (ret < 0) {
+		dev_err(bdi->dev, "Can't read SS reg: %d\n", ret);
+		return;
+	}
+
+	i = 0;
+	do {
+		ret = bq24190_read(bdi, BQ24190_REG_F, &f_reg);
+		if (ret < 0) {
+			dev_err(bdi->dev, "Can't read F reg: %d\n", ret);
+			return;
+		}
+	} while (f_reg && ++i < 2);
+
+	/* ignore over/under voltage fault after disconnect */
+	if (f_reg == (1 << BQ24190_REG_F_CHRG_FAULT_SHIFT) &&
+	    !(ss_reg & BQ24190_REG_SS_PG_STAT_MASK))
+		f_reg = 0;
+
+	if (f_reg != bdi->f_reg) {
+		dev_warn(bdi->dev,
+			"Fault: boost %d, charge %d, battery %d, ntc %d\n",
+			!!(f_reg & BQ24190_REG_F_BOOST_FAULT_MASK),
+			!!(f_reg & BQ24190_REG_F_CHRG_FAULT_MASK),
+			!!(f_reg & BQ24190_REG_F_BAT_FAULT_MASK),
+			!!(f_reg & BQ24190_REG_F_NTC_FAULT_MASK));
+
+		mutex_lock(&bdi->f_reg_lock);
+		if ((bdi->f_reg & battery_mask_f) != (f_reg & battery_mask_f))
+			alert_battery = true;
+		if ((bdi->f_reg & ~battery_mask_f) != (f_reg & ~battery_mask_f))
+			alert_charger = true;
+		bdi->f_reg = f_reg;
+		mutex_unlock(&bdi->f_reg_lock);
+	}
+
+	if (ss_reg != bdi->ss_reg) {
+		/*
+		 * The device is in host mode so when PG_STAT goes from 1->0
+		 * (i.e., power removed) HIZ needs to be disabled.
+		 */
+		if ((bdi->ss_reg & BQ24190_REG_SS_PG_STAT_MASK) &&
+				!(ss_reg & BQ24190_REG_SS_PG_STAT_MASK)) {
+			ret = bq24190_write_mask(bdi, BQ24190_REG_ISC,
+					BQ24190_REG_ISC_EN_HIZ_MASK,
+					BQ24190_REG_ISC_EN_HIZ_SHIFT,
+					0);
+			if (ret < 0)
+				dev_err(bdi->dev, "Can't access ISC reg: %d\n",
+					ret);
+		}
+
+		if ((bdi->ss_reg & battery_mask_ss) != (ss_reg & battery_mask_ss))
+			alert_battery = true;
+		if ((bdi->ss_reg & ~battery_mask_ss) != (ss_reg & ~battery_mask_ss))
+			alert_charger = true;
+		bdi->ss_reg = ss_reg;
+	}
+
+	if (alert_charger || alert_battery) {
+		power_supply_changed(bdi->charger);
+		bq24190_configure_usb_otg(bdi, ss_reg);
+	}
+	if (alert_battery && bdi->battery)
+		power_supply_changed(bdi->battery);
+
+	dev_dbg(bdi->dev, "ss_reg: 0x%02x, f_reg: 0x%02x\n", ss_reg, f_reg);
+}
+
+static irqreturn_t bq24190_irq_handler_thread(int irq, void *data)
+{
+	struct bq24190_dev_info *bdi = data;
+	int error;
+
+	bdi->irq_event = true;
+	error = pm_runtime_resume_and_get(bdi->dev);
+	if (error < 0) {
+		dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", error);
+		return IRQ_NONE;
+	}
+	bq24190_check_status(bdi);
+	pm_runtime_mark_last_busy(bdi->dev);
+	pm_runtime_put_autosuspend(bdi->dev);
+	bdi->irq_event = false;
+
+	return IRQ_HANDLED;
+}
+
+static int bq24190_hw_init(struct bq24190_dev_info *bdi)
+{
+	u8 v;
+	int ret;
+
+	/* First check that the device really is what its supposed to be */
+	ret = bq24190_read_mask(bdi, BQ24190_REG_VPRS,
+			BQ24190_REG_VPRS_PN_MASK,
+			BQ24190_REG_VPRS_PN_SHIFT,
+			&v);
+	if (ret < 0)
+		return ret;
+
+	switch (v) {
+	case BQ24190_REG_VPRS_PN_24190:
+	case BQ24190_REG_VPRS_PN_24192:
+	case BQ24190_REG_VPRS_PN_24192I:
+		break;
+	default:
+		dev_err(bdi->dev, "Error unknown model: 0x%02x\n", v);
+		return -ENODEV;
+	}
+
+	ret = bq24190_register_reset(bdi);
+	if (ret < 0)
+		return ret;
+
+	ret = bq24190_set_config(bdi);
+	if (ret < 0)
+		return ret;
+
+	return bq24190_read(bdi, BQ24190_REG_SS, &bdi->ss_reg);
+}
+
+static int bq24190_get_config(struct bq24190_dev_info *bdi)
+{
+	const char * const s = "ti,system-minimum-microvolt";
+	struct power_supply_battery_info info = {};
+	int v;
+
+	if (device_property_read_u32(bdi->dev, s, &v) == 0) {
+		v /= 1000;
+		if (v >= BQ24190_REG_POC_SYS_MIN_MIN
+		 && v <= BQ24190_REG_POC_SYS_MIN_MAX)
+			bdi->sys_min = v;
+		else
+			dev_warn(bdi->dev, "invalid value for %s: %u\n", s, v);
+	}
+
+	if (bdi->dev->of_node &&
+	    !power_supply_get_battery_info(bdi->charger, &info)) {
+		v = info.precharge_current_ua / 1000;
+		if (v >= BQ24190_REG_PCTCC_IPRECHG_MIN
+		 && v <= BQ24190_REG_PCTCC_IPRECHG_MAX)
+			bdi->iprechg = v;
+		else
+			dev_warn(bdi->dev, "invalid value for battery:precharge-current-microamp: %d\n",
+				 v);
+
+		v = info.charge_term_current_ua / 1000;
+		if (v >= BQ24190_REG_PCTCC_ITERM_MIN
+		 && v <= BQ24190_REG_PCTCC_ITERM_MAX)
+			bdi->iterm = v;
+		else
+			dev_warn(bdi->dev, "invalid value for battery:charge-term-current-microamp: %d\n",
+				 v);
+	}
+
+	return 0;
+}
+
+static int bq24190_probe(struct i2c_client *client,
+		const struct i2c_device_id *id)
+{
+	struct i2c_adapter *adapter = client->adapter;
+	struct device *dev = &client->dev;
+	struct power_supply_config charger_cfg = {}, battery_cfg = {};
+	struct bq24190_dev_info *bdi;
+	int ret;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
+		dev_err(dev, "No support for SMBUS_BYTE_DATA\n");
+		return -ENODEV;
+	}
+
+	bdi = devm_kzalloc(dev, sizeof(*bdi), GFP_KERNEL);
+	if (!bdi) {
+		dev_err(dev, "Can't alloc bdi struct\n");
+		return -ENOMEM;
+	}
+
+	bdi->client = client;
+	bdi->dev = dev;
+	strncpy(bdi->model_name, id->name, I2C_NAME_SIZE);
+	mutex_init(&bdi->f_reg_lock);
+	bdi->f_reg = 0;
+	bdi->ss_reg = BQ24190_REG_SS_VBUS_STAT_MASK; /* impossible state */
+	INIT_DELAYED_WORK(&bdi->input_current_limit_work,
+			  bq24190_input_current_limit_work);
+
+	i2c_set_clientdata(client, bdi);
+
+	if (client->irq <= 0) {
+		dev_err(dev, "Can't get irq info\n");
+		return -EINVAL;
+	}
+
+	bdi->edev = devm_extcon_dev_allocate(dev, bq24190_usb_extcon_cable);
+	if (IS_ERR(bdi->edev))
+		return PTR_ERR(bdi->edev);
+
+	ret = devm_extcon_dev_register(dev, bdi->edev);
+	if (ret < 0)
+		return ret;
+
+	pm_runtime_enable(dev);
+	pm_runtime_use_autosuspend(dev);
+	pm_runtime_set_autosuspend_delay(dev, 600);
+	ret = pm_runtime_get_sync(dev);
+	if (ret < 0) {
+		dev_err(dev, "pm_runtime_get failed: %i\n", ret);
+		goto out_pmrt;
+	}
+
+#ifdef CONFIG_SYSFS
+	bq24190_sysfs_init_attrs();
+	charger_cfg.attr_grp = bq24190_sysfs_groups;
+#endif
+
+	charger_cfg.drv_data = bdi;
+	charger_cfg.of_node = dev->of_node;
+	charger_cfg.supplied_to = bq24190_charger_supplied_to;
+	charger_cfg.num_supplicants = ARRAY_SIZE(bq24190_charger_supplied_to),
+	bdi->charger = power_supply_register(dev, &bq24190_charger_desc,
+						&charger_cfg);
+	if (IS_ERR(bdi->charger)) {
+		dev_err(dev, "Can't register charger\n");
+		ret = PTR_ERR(bdi->charger);
+		goto out_pmrt;
+	}
+
+	/* the battery class is deprecated and will be removed. */
+	/* in the interim, this property hides it.              */
+	if (!device_property_read_bool(dev, "omit-battery-class")) {
+		battery_cfg.drv_data = bdi;
+		bdi->battery = power_supply_register(dev, &bq24190_battery_desc,
+						     &battery_cfg);
+		if (IS_ERR(bdi->battery)) {
+			dev_err(dev, "Can't register battery\n");
+			ret = PTR_ERR(bdi->battery);
+			goto out_charger;
+		}
+	}
+
+	ret = bq24190_get_config(bdi);
+	if (ret < 0) {
+		dev_err(dev, "Can't get devicetree config\n");
+		goto out_charger;
+	}
+
+	ret = bq24190_hw_init(bdi);
+	if (ret < 0) {
+		dev_err(dev, "Hardware init failed\n");
+		goto out_charger;
+	}
+
+	ret = bq24190_configure_usb_otg(bdi, bdi->ss_reg);
+	if (ret < 0)
+		goto out_charger;
+
+	bdi->initialized = true;
+
+	ret = devm_request_threaded_irq(dev, client->irq, NULL,
+			bq24190_irq_handler_thread,
+			IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+			"bq24190-charger", bdi);
+	if (ret < 0) {
+		dev_err(dev, "Can't set up irq handler\n");
+		goto out_charger;
+	}
+
+	ret = bq24190_register_vbus_regulator(bdi);
+	if (ret < 0)
+		goto out_charger;
+
+	enable_irq_wake(client->irq);
+
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+
+	return 0;
+
+out_charger:
+	if (!IS_ERR_OR_NULL(bdi->battery))
+		power_supply_unregister(bdi->battery);
+	power_supply_unregister(bdi->charger);
+
+out_pmrt:
+	pm_runtime_put_sync(dev);
+	pm_runtime_dont_use_autosuspend(dev);
+	pm_runtime_disable(dev);
+	return ret;
+}
+
+static int bq24190_remove(struct i2c_client *client)
+{
+	struct bq24190_dev_info *bdi = i2c_get_clientdata(client);
+	int error;
+
+	cancel_delayed_work_sync(&bdi->input_current_limit_work);
+	error = pm_runtime_resume_and_get(bdi->dev);
+	if (error < 0)
+		dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", error);
+
+	bq24190_register_reset(bdi);
+	if (bdi->battery)
+		power_supply_unregister(bdi->battery);
+	power_supply_unregister(bdi->charger);
+	if (error >= 0)
+		pm_runtime_put_sync(bdi->dev);
+	pm_runtime_dont_use_autosuspend(bdi->dev);
+	pm_runtime_disable(bdi->dev);
+
+	return 0;
+}
+
+static __maybe_unused int bq24190_runtime_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct bq24190_dev_info *bdi = i2c_get_clientdata(client);
+
+	if (!bdi->initialized)
+		return 0;
+
+	dev_dbg(bdi->dev, "%s\n", __func__);
+
+	return 0;
+}
+
+static __maybe_unused int bq24190_runtime_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct bq24190_dev_info *bdi = i2c_get_clientdata(client);
+
+	if (!bdi->initialized)
+		return 0;
+
+	if (!bdi->irq_event) {
+		dev_dbg(bdi->dev, "checking events on possible wakeirq\n");
+		bq24190_check_status(bdi);
+	}
+
+	return 0;
+}
+
+static __maybe_unused int bq24190_pm_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct bq24190_dev_info *bdi = i2c_get_clientdata(client);
+	int error;
+
+	error = pm_runtime_resume_and_get(bdi->dev);
+	if (error < 0)
+		dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", error);
+
+	bq24190_register_reset(bdi);
+
+	if (error >= 0) {
+		pm_runtime_mark_last_busy(bdi->dev);
+		pm_runtime_put_autosuspend(bdi->dev);
+	}
+
+	return 0;
+}
+
+static __maybe_unused int bq24190_pm_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct bq24190_dev_info *bdi = i2c_get_clientdata(client);
+	int error;
+
+	bdi->f_reg = 0;
+	bdi->ss_reg = BQ24190_REG_SS_VBUS_STAT_MASK; /* impossible state */
+
+	error = pm_runtime_resume_and_get(bdi->dev);
+	if (error < 0)
+		dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", error);
+
+	bq24190_register_reset(bdi);
+	bq24190_set_config(bdi);
+	bq24190_read(bdi, BQ24190_REG_SS, &bdi->ss_reg);
+
+	if (error >= 0) {
+		pm_runtime_mark_last_busy(bdi->dev);
+		pm_runtime_put_autosuspend(bdi->dev);
+	}
+
+	/* Things may have changed while suspended so alert upper layer */
+	power_supply_changed(bdi->charger);
+	if (bdi->battery)
+		power_supply_changed(bdi->battery);
+
+	return 0;
+}
+
+static const struct dev_pm_ops bq24190_pm_ops = {
+	SET_RUNTIME_PM_OPS(bq24190_runtime_suspend, bq24190_runtime_resume,
+			   NULL)
+	SET_SYSTEM_SLEEP_PM_OPS(bq24190_pm_suspend, bq24190_pm_resume)
+};
+
+static const struct i2c_device_id bq24190_i2c_ids[] = {
+	{ "bq24190" },
+	{ "bq24192" },
+	{ "bq24192i" },
+	{ "bq24196" },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, bq24190_i2c_ids);
+
+#ifdef CONFIG_OF
+static const struct of_device_id bq24190_of_match[] = {
+	{ .compatible = "ti,bq24190", },
+	{ .compatible = "ti,bq24192", },
+	{ .compatible = "ti,bq24192i", },
+	{ .compatible = "ti,bq24196", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, bq24190_of_match);
+#else
+static const struct of_device_id bq24190_of_match[] = {
+	{ },
+};
+#endif
+
+static struct i2c_driver bq24190_driver = {
+	.probe		= bq24190_probe,
+	.remove		= bq24190_remove,
+	.id_table	= bq24190_i2c_ids,
+	.driver = {
+		.name		= "bq24190-charger",
+		.pm		= &bq24190_pm_ops,
+		.of_match_table	= of_match_ptr(bq24190_of_match),
+	},
+};
+module_i2c_driver(bq24190_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mark A. Greer <mgreer@animalcreek.com>");
+MODULE_DESCRIPTION("TI BQ24190 Charger Driver");