Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 594 insertions, 0 deletions

diff --git a/drivers/power/supply/max8925_power.c b/drivers/power/supply/max8925_power.c
new file mode 100644
index 000000000..8878f9131
--- /dev/null
+++ b/drivers/power/supply/max8925_power.c
@@ -0,0 +1,594 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Battery driver for Maxim MAX8925
+ *
+ * Copyright (c) 2009-2010 Marvell International Ltd.
+ *	Haojian Zhuang <haojian.zhuang@marvell.com>
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/mfd/max8925.h>
+
+/* registers in GPM */
+#define MAX8925_OUT5VEN			0x54
+#define MAX8925_OUT3VEN			0x58
+#define MAX8925_CHG_CNTL1		0x7c
+
+/* bits definition */
+#define MAX8925_CHG_STAT_VSYSLOW	(1 << 0)
+#define MAX8925_CHG_STAT_MODE_MASK	(3 << 2)
+#define MAX8925_CHG_STAT_EN_MASK	(1 << 4)
+#define MAX8925_CHG_MBDET		(1 << 1)
+#define MAX8925_CHG_AC_RANGE_MASK	(3 << 6)
+
+/* registers in ADC */
+#define MAX8925_ADC_RES_CNFG1		0x06
+#define MAX8925_ADC_AVG_CNFG1		0x07
+#define MAX8925_ADC_ACQ_CNFG1		0x08
+#define MAX8925_ADC_ACQ_CNFG2		0x09
+/* 2 bytes registers in below. MSB is 1st, LSB is 2nd. */
+#define MAX8925_ADC_AUX2		0x62
+#define MAX8925_ADC_VCHG		0x64
+#define MAX8925_ADC_VBBATT		0x66
+#define MAX8925_ADC_VMBATT		0x68
+#define MAX8925_ADC_ISNS		0x6a
+#define MAX8925_ADC_THM			0x6c
+#define MAX8925_ADC_TDIE		0x6e
+#define MAX8925_CMD_AUX2		0xc8
+#define MAX8925_CMD_VCHG		0xd0
+#define MAX8925_CMD_VBBATT		0xd8
+#define MAX8925_CMD_VMBATT		0xe0
+#define MAX8925_CMD_ISNS		0xe8
+#define MAX8925_CMD_THM			0xf0
+#define MAX8925_CMD_TDIE		0xf8
+
+enum {
+	MEASURE_AUX2,
+	MEASURE_VCHG,
+	MEASURE_VBBATT,
+	MEASURE_VMBATT,
+	MEASURE_ISNS,
+	MEASURE_THM,
+	MEASURE_TDIE,
+	MEASURE_MAX,
+};
+
+struct max8925_power_info {
+	struct max8925_chip	*chip;
+	struct i2c_client	*gpm;
+	struct i2c_client	*adc;
+
+	struct power_supply	*ac;
+	struct power_supply	*usb;
+	struct power_supply	*battery;
+	int			irq_base;
+	unsigned		ac_online:1;
+	unsigned		usb_online:1;
+	unsigned		bat_online:1;
+	unsigned		chg_mode:2;
+	unsigned		batt_detect:1;	/* detecing MB by ID pin */
+	unsigned		topoff_threshold:2;
+	unsigned		fast_charge:3;
+	unsigned		no_temp_support:1;
+	unsigned		no_insert_detect:1;
+
+	int (*set_charger) (int);
+};
+
+static int __set_charger(struct max8925_power_info *info, int enable)
+{
+	struct max8925_chip *chip = info->chip;
+	if (enable) {
+		/* enable charger in platform */
+		if (info->set_charger)
+			info->set_charger(1);
+		/* enable charger */
+		max8925_set_bits(info->gpm, MAX8925_CHG_CNTL1, 1 << 7, 0);
+	} else {
+		/* disable charge */
+		max8925_set_bits(info->gpm, MAX8925_CHG_CNTL1, 1 << 7, 1 << 7);
+		if (info->set_charger)
+			info->set_charger(0);
+	}
+	dev_dbg(chip->dev, "%s\n", (enable) ? "Enable charger"
+		: "Disable charger");
+	return 0;
+}
+
+static irqreturn_t max8925_charger_handler(int irq, void *data)
+{
+	struct max8925_power_info *info = (struct max8925_power_info *)data;
+	struct max8925_chip *chip = info->chip;
+
+	switch (irq - chip->irq_base) {
+	case MAX8925_IRQ_VCHG_DC_R:
+		info->ac_online = 1;
+		__set_charger(info, 1);
+		dev_dbg(chip->dev, "Adapter inserted\n");
+		break;
+	case MAX8925_IRQ_VCHG_DC_F:
+		info->ac_online = 0;
+		__set_charger(info, 0);
+		dev_dbg(chip->dev, "Adapter removed\n");
+		break;
+	case MAX8925_IRQ_VCHG_THM_OK_F:
+		/* Battery is not ready yet */
+		dev_dbg(chip->dev, "Battery temperature is out of range\n");
+		fallthrough;
+	case MAX8925_IRQ_VCHG_DC_OVP:
+		dev_dbg(chip->dev, "Error detection\n");
+		__set_charger(info, 0);
+		break;
+	case MAX8925_IRQ_VCHG_THM_OK_R:
+		/* Battery is ready now */
+		dev_dbg(chip->dev, "Battery temperature is in range\n");
+		break;
+	case MAX8925_IRQ_VCHG_SYSLOW_R:
+		/* VSYS is low */
+		dev_info(chip->dev, "Sys power is too low\n");
+		break;
+	case MAX8925_IRQ_VCHG_SYSLOW_F:
+		dev_dbg(chip->dev, "Sys power is above low threshold\n");
+		break;
+	case MAX8925_IRQ_VCHG_DONE:
+		__set_charger(info, 0);
+		dev_dbg(chip->dev, "Charging is done\n");
+		break;
+	case MAX8925_IRQ_VCHG_TOPOFF:
+		dev_dbg(chip->dev, "Charging in top-off mode\n");
+		break;
+	case MAX8925_IRQ_VCHG_TMR_FAULT:
+		__set_charger(info, 0);
+		dev_dbg(chip->dev, "Safe timer is expired\n");
+		break;
+	case MAX8925_IRQ_VCHG_RST:
+		__set_charger(info, 0);
+		dev_dbg(chip->dev, "Charger is reset\n");
+		break;
+	}
+	return IRQ_HANDLED;
+}
+
+static int start_measure(struct max8925_power_info *info, int type)
+{
+	unsigned char buf[2] = {0, 0};
+	int meas_cmd;
+	int meas_reg = 0, ret;
+
+	switch (type) {
+	case MEASURE_VCHG:
+		meas_cmd = MAX8925_CMD_VCHG;
+		meas_reg = MAX8925_ADC_VCHG;
+		break;
+	case MEASURE_VBBATT:
+		meas_cmd = MAX8925_CMD_VBBATT;
+		meas_reg = MAX8925_ADC_VBBATT;
+		break;
+	case MEASURE_VMBATT:
+		meas_cmd = MAX8925_CMD_VMBATT;
+		meas_reg = MAX8925_ADC_VMBATT;
+		break;
+	case MEASURE_ISNS:
+		meas_cmd = MAX8925_CMD_ISNS;
+		meas_reg = MAX8925_ADC_ISNS;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	max8925_reg_write(info->adc, meas_cmd, 0);
+	max8925_bulk_read(info->adc, meas_reg, 2, buf);
+	ret = ((buf[0]<<8) | buf[1]) >> 4;
+
+	return ret;
+}
+
+static int max8925_ac_get_prop(struct power_supply *psy,
+			       enum power_supply_property psp,
+			       union power_supply_propval *val)
+{
+	struct max8925_power_info *info = dev_get_drvdata(psy->dev.parent);
+	int ret = 0;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = info->ac_online;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		if (info->ac_online) {
+			ret = start_measure(info, MEASURE_VCHG);
+			if (ret >= 0) {
+				val->intval = ret * 2000;	/* unit is uV */
+				goto out;
+			}
+		}
+		ret = -ENODATA;
+		break;
+	default:
+		ret = -ENODEV;
+		break;
+	}
+out:
+	return ret;
+}
+
+static enum power_supply_property max8925_ac_props[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+};
+
+static int max8925_usb_get_prop(struct power_supply *psy,
+				enum power_supply_property psp,
+				union power_supply_propval *val)
+{
+	struct max8925_power_info *info = dev_get_drvdata(psy->dev.parent);
+	int ret = 0;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = info->usb_online;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		if (info->usb_online) {
+			ret = start_measure(info, MEASURE_VCHG);
+			if (ret >= 0) {
+				val->intval = ret * 2000;	/* unit is uV */
+				goto out;
+			}
+		}
+		ret = -ENODATA;
+		break;
+	default:
+		ret = -ENODEV;
+		break;
+	}
+out:
+	return ret;
+}
+
+static enum power_supply_property max8925_usb_props[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+};
+
+static int max8925_bat_get_prop(struct power_supply *psy,
+				enum power_supply_property psp,
+				union power_supply_propval *val)
+{
+	struct max8925_power_info *info = dev_get_drvdata(psy->dev.parent);
+	int ret = 0;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = info->bat_online;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		if (info->bat_online) {
+			ret = start_measure(info, MEASURE_VMBATT);
+			if (ret >= 0) {
+				val->intval = ret * 2000;	/* unit is uV */
+				ret = 0;
+				break;
+			}
+		}
+		ret = -ENODATA;
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		if (info->bat_online) {
+			ret = start_measure(info, MEASURE_ISNS);
+			if (ret >= 0) {
+				/* assume r_sns is 0.02 */
+				ret = ((ret * 6250) - 3125) /* uA */;
+				val->intval = 0;
+				if (ret > 0)
+					val->intval = ret; /* unit is mA */
+				ret = 0;
+				break;
+			}
+		}
+		ret = -ENODATA;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_TYPE:
+		if (!info->bat_online) {
+			ret = -ENODATA;
+			break;
+		}
+		ret = max8925_reg_read(info->gpm, MAX8925_CHG_STATUS);
+		ret = (ret & MAX8925_CHG_STAT_MODE_MASK) >> 2;
+		switch (ret) {
+		case 1:
+			val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST;
+			break;
+		case 0:
+		case 2:
+			val->intval = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+			break;
+		case 3:
+			val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE;
+			break;
+		}
+		ret = 0;
+		break;
+	case POWER_SUPPLY_PROP_STATUS:
+		if (!info->bat_online) {
+			ret = -ENODATA;
+			break;
+		}
+		ret = max8925_reg_read(info->gpm, MAX8925_CHG_STATUS);
+		if (info->usb_online || info->ac_online) {
+			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+			if (ret & MAX8925_CHG_STAT_EN_MASK)
+				val->intval = POWER_SUPPLY_STATUS_CHARGING;
+		} else
+			val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+		ret = 0;
+		break;
+	default:
+		ret = -ENODEV;
+		break;
+	}
+	return ret;
+}
+
+static enum power_supply_property max8925_battery_props[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CHARGE_TYPE,
+	POWER_SUPPLY_PROP_STATUS,
+};
+
+static const struct power_supply_desc ac_desc = {
+	.name		= "max8925-ac",
+	.type		= POWER_SUPPLY_TYPE_MAINS,
+	.properties	= max8925_ac_props,
+	.num_properties	= ARRAY_SIZE(max8925_ac_props),
+	.get_property	= max8925_ac_get_prop,
+};
+
+static const struct power_supply_desc usb_desc = {
+	.name		= "max8925-usb",
+	.type		= POWER_SUPPLY_TYPE_USB,
+	.properties	= max8925_usb_props,
+	.num_properties	= ARRAY_SIZE(max8925_usb_props),
+	.get_property	= max8925_usb_get_prop,
+};
+
+static const struct power_supply_desc battery_desc = {
+	.name		= "max8925-battery",
+	.type		= POWER_SUPPLY_TYPE_BATTERY,
+	.properties	= max8925_battery_props,
+	.num_properties	= ARRAY_SIZE(max8925_battery_props),
+	.get_property	= max8925_bat_get_prop,
+};
+
+#define REQUEST_IRQ(_irq, _name)					\
+do {									\
+	ret = request_threaded_irq(chip->irq_base + _irq, NULL,		\
+				    max8925_charger_handler,		\
+				    IRQF_ONESHOT, _name, info);		\
+	if (ret)							\
+		dev_err(chip->dev, "Failed to request IRQ #%d: %d\n",	\
+			_irq, ret);					\
+} while (0)
+
+static int max8925_init_charger(struct max8925_chip *chip,
+					  struct max8925_power_info *info)
+{
+	int ret;
+
+	REQUEST_IRQ(MAX8925_IRQ_VCHG_DC_OVP, "ac-ovp");
+	if (!info->no_insert_detect) {
+		REQUEST_IRQ(MAX8925_IRQ_VCHG_DC_F, "ac-remove");
+		REQUEST_IRQ(MAX8925_IRQ_VCHG_DC_R, "ac-insert");
+	}
+	if (!info->no_temp_support) {
+		REQUEST_IRQ(MAX8925_IRQ_VCHG_THM_OK_R, "batt-temp-in-range");
+		REQUEST_IRQ(MAX8925_IRQ_VCHG_THM_OK_F, "batt-temp-out-range");
+	}
+	REQUEST_IRQ(MAX8925_IRQ_VCHG_SYSLOW_F, "vsys-high");
+	REQUEST_IRQ(MAX8925_IRQ_VCHG_SYSLOW_R, "vsys-low");
+	REQUEST_IRQ(MAX8925_IRQ_VCHG_RST, "charger-reset");
+	REQUEST_IRQ(MAX8925_IRQ_VCHG_DONE, "charger-done");
+	REQUEST_IRQ(MAX8925_IRQ_VCHG_TOPOFF, "charger-topoff");
+	REQUEST_IRQ(MAX8925_IRQ_VCHG_TMR_FAULT, "charger-timer-expire");
+
+	info->usb_online = 0;
+	info->bat_online = 0;
+
+	/* check for power - can miss interrupt at boot time */
+	if (start_measure(info, MEASURE_VCHG) * 2000 > 500000)
+		info->ac_online = 1;
+	else
+		info->ac_online = 0;
+
+	ret = max8925_reg_read(info->gpm, MAX8925_CHG_STATUS);
+	if (ret >= 0) {
+		/*
+		 * If battery detection is enabled, ID pin of battery is
+		 * connected to MBDET pin of MAX8925. It could be used to
+		 * detect battery presence.
+		 * Otherwise, we have to assume that battery is always on.
+		 */
+		if (info->batt_detect)
+			info->bat_online = (ret & MAX8925_CHG_MBDET) ? 0 : 1;
+		else
+			info->bat_online = 1;
+		if (ret & MAX8925_CHG_AC_RANGE_MASK)
+			info->ac_online = 1;
+		else
+			info->ac_online = 0;
+	}
+	/* disable charge */
+	max8925_set_bits(info->gpm, MAX8925_CHG_CNTL1, 1 << 7, 1 << 7);
+	/* set charging current in charge topoff mode */
+	max8925_set_bits(info->gpm, MAX8925_CHG_CNTL1, 3 << 5,
+			 info->topoff_threshold << 5);
+	/* set charing current in fast charge mode */
+	max8925_set_bits(info->gpm, MAX8925_CHG_CNTL1, 7, info->fast_charge);
+
+	return 0;
+}
+
+static int max8925_deinit_charger(struct max8925_power_info *info)
+{
+	struct max8925_chip *chip = info->chip;
+	int irq;
+
+	irq = chip->irq_base + MAX8925_IRQ_VCHG_DC_OVP;
+	for (; irq <= chip->irq_base + MAX8925_IRQ_VCHG_TMR_FAULT; irq++)
+		free_irq(irq, info);
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static struct max8925_power_pdata *
+max8925_power_dt_init(struct platform_device *pdev)
+{
+	struct device_node *nproot = pdev->dev.parent->of_node;
+	struct device_node *np;
+	int batt_detect;
+	int topoff_threshold;
+	int fast_charge;
+	int no_temp_support;
+	int no_insert_detect;
+	struct max8925_power_pdata *pdata;
+
+	if (!nproot)
+		return pdev->dev.platform_data;
+
+	np = of_get_child_by_name(nproot, "charger");
+	if (!np) {
+		dev_err(&pdev->dev, "failed to find charger node\n");
+		return NULL;
+	}
+
+	pdata = devm_kzalloc(&pdev->dev,
+			sizeof(struct max8925_power_pdata),
+			GFP_KERNEL);
+	if (!pdata)
+		goto ret;
+
+	of_property_read_u32(np, "topoff-threshold", &topoff_threshold);
+	of_property_read_u32(np, "batt-detect", &batt_detect);
+	of_property_read_u32(np, "fast-charge", &fast_charge);
+	of_property_read_u32(np, "no-insert-detect", &no_insert_detect);
+	of_property_read_u32(np, "no-temp-support", &no_temp_support);
+
+	pdata->batt_detect = batt_detect;
+	pdata->fast_charge = fast_charge;
+	pdata->topoff_threshold = topoff_threshold;
+	pdata->no_insert_detect = no_insert_detect;
+	pdata->no_temp_support = no_temp_support;
+
+ret:
+	of_node_put(np);
+	return pdata;
+}
+#else
+static struct max8925_power_pdata *
+max8925_power_dt_init(struct platform_device *pdev)
+{
+	return pdev->dev.platform_data;
+}
+#endif
+
+static int max8925_power_probe(struct platform_device *pdev)
+{
+	struct max8925_chip *chip = dev_get_drvdata(pdev->dev.parent);
+	struct power_supply_config psy_cfg = {}; /* Only for ac and usb */
+	struct max8925_power_pdata *pdata = NULL;
+	struct max8925_power_info *info;
+	int ret;
+
+	pdata = max8925_power_dt_init(pdev);
+	if (!pdata) {
+		dev_err(&pdev->dev, "platform data isn't assigned to "
+			"power supply\n");
+		return -EINVAL;
+	}
+
+	info = devm_kzalloc(&pdev->dev, sizeof(struct max8925_power_info),
+				GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+	info->chip = chip;
+	info->gpm = chip->i2c;
+	info->adc = chip->adc;
+	platform_set_drvdata(pdev, info);
+
+	psy_cfg.supplied_to = pdata->supplied_to;
+	psy_cfg.num_supplicants = pdata->num_supplicants;
+
+	info->ac = power_supply_register(&pdev->dev, &ac_desc, &psy_cfg);
+	if (IS_ERR(info->ac)) {
+		ret = PTR_ERR(info->ac);
+		goto out;
+	}
+	info->ac->dev.parent = &pdev->dev;
+
+	info->usb = power_supply_register(&pdev->dev, &usb_desc, &psy_cfg);
+	if (IS_ERR(info->usb)) {
+		ret = PTR_ERR(info->usb);
+		goto out_unregister_ac;
+	}
+	info->usb->dev.parent = &pdev->dev;
+
+	info->battery = power_supply_register(&pdev->dev, &battery_desc, NULL);
+	if (IS_ERR(info->battery)) {
+		ret = PTR_ERR(info->battery);
+		goto out_unregister_usb;
+	}
+	info->battery->dev.parent = &pdev->dev;
+
+	info->batt_detect = pdata->batt_detect;
+	info->topoff_threshold = pdata->topoff_threshold;
+	info->fast_charge = pdata->fast_charge;
+	info->set_charger = pdata->set_charger;
+	info->no_temp_support = pdata->no_temp_support;
+	info->no_insert_detect = pdata->no_insert_detect;
+
+	max8925_init_charger(chip, info);
+	return 0;
+out_unregister_usb:
+	power_supply_unregister(info->usb);
+out_unregister_ac:
+	power_supply_unregister(info->ac);
+out:
+	return ret;
+}
+
+static int max8925_power_remove(struct platform_device *pdev)
+{
+	struct max8925_power_info *info = platform_get_drvdata(pdev);
+
+	if (info) {
+		power_supply_unregister(info->ac);
+		power_supply_unregister(info->usb);
+		power_supply_unregister(info->battery);
+		max8925_deinit_charger(info);
+	}
+	return 0;
+}
+
+static struct platform_driver max8925_power_driver = {
+	.probe	= max8925_power_probe,
+	.remove	= max8925_power_remove,
+	.driver	= {
+		.name	= "max8925-power",
+	},
+};
+
+module_platform_driver(max8925_power_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Power supply driver for MAX8925");
+MODULE_ALIAS("platform:max8925-power");