Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 268 insertions, 0 deletions

diff --git a/drivers/scsi/a3000.c b/drivers/scsi/a3000.c
new file mode 100644
index 000000000..86f1da22a
--- /dev/null
+++ b/drivers/scsi/a3000.c
@@ -0,0 +1,268 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+
+#include <asm/page.h>
+#include <asm/amigaints.h>
+#include <asm/amigahw.h>
+
+#include "scsi.h"
+#include "wd33c93.h"
+#include "a3000.h"
+
+
+struct a3000_hostdata {
+	struct WD33C93_hostdata wh;
+	struct a3000_scsiregs *regs;
+};
+
+static irqreturn_t a3000_intr(int irq, void *data)
+{
+	struct Scsi_Host *instance = data;
+	struct a3000_hostdata *hdata = shost_priv(instance);
+	unsigned int status = hdata->regs->ISTR;
+	unsigned long flags;
+
+	if (!(status & ISTR_INT_P))
+		return IRQ_NONE;
+	if (status & ISTR_INTS) {
+		spin_lock_irqsave(instance->host_lock, flags);
+		wd33c93_intr(instance);
+		spin_unlock_irqrestore(instance->host_lock, flags);
+		return IRQ_HANDLED;
+	}
+	pr_warn("Non-serviced A3000 SCSI-interrupt? ISTR = %02x\n", status);
+	return IRQ_NONE;
+}
+
+static int dma_setup(struct scsi_cmnd *cmd, int dir_in)
+{
+	struct Scsi_Host *instance = cmd->device->host;
+	struct a3000_hostdata *hdata = shost_priv(instance);
+	struct WD33C93_hostdata *wh = &hdata->wh;
+	struct a3000_scsiregs *regs = hdata->regs;
+	unsigned short cntr = CNTR_PDMD | CNTR_INTEN;
+	unsigned long addr = virt_to_bus(cmd->SCp.ptr);
+
+	/*
+	 * if the physical address has the wrong alignment, or if
+	 * physical address is bad, or if it is a write and at the
+	 * end of a physical memory chunk, then allocate a bounce
+	 * buffer
+	 */
+	if (addr & A3000_XFER_MASK) {
+		wh->dma_bounce_len = (cmd->SCp.this_residual + 511) & ~0x1ff;
+		wh->dma_bounce_buffer = kmalloc(wh->dma_bounce_len,
+						GFP_KERNEL);
+
+		/* can't allocate memory; use PIO */
+		if (!wh->dma_bounce_buffer) {
+			wh->dma_bounce_len = 0;
+			return 1;
+		}
+
+		if (!dir_in) {
+			/* copy to bounce buffer for a write */
+			memcpy(wh->dma_bounce_buffer, cmd->SCp.ptr,
+			       cmd->SCp.this_residual);
+		}
+
+		addr = virt_to_bus(wh->dma_bounce_buffer);
+	}
+
+	/* setup dma direction */
+	if (!dir_in)
+		cntr |= CNTR_DDIR;
+
+	/* remember direction */
+	wh->dma_dir = dir_in;
+
+	regs->CNTR = cntr;
+
+	/* setup DMA *physical* address */
+	regs->ACR = addr;
+
+	if (dir_in) {
+		/* invalidate any cache */
+		cache_clear(addr, cmd->SCp.this_residual);
+	} else {
+		/* push any dirty cache */
+		cache_push(addr, cmd->SCp.this_residual);
+	}
+
+	/* start DMA */
+	mb();			/* make sure setup is completed */
+	regs->ST_DMA = 1;
+	mb();			/* make sure DMA has started before next IO */
+
+	/* return success */
+	return 0;
+}
+
+static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt,
+		     int status)
+{
+	struct a3000_hostdata *hdata = shost_priv(instance);
+	struct WD33C93_hostdata *wh = &hdata->wh;
+	struct a3000_scsiregs *regs = hdata->regs;
+
+	/* disable SCSI interrupts */
+	unsigned short cntr = CNTR_PDMD;
+
+	if (!wh->dma_dir)
+		cntr |= CNTR_DDIR;
+
+	regs->CNTR = cntr;
+	mb();			/* make sure CNTR is updated before next IO */
+
+	/* flush if we were reading */
+	if (wh->dma_dir) {
+		regs->FLUSH = 1;
+		mb();		/* don't allow prefetch */
+		while (!(regs->ISTR & ISTR_FE_FLG))
+			barrier();
+		mb();		/* no IO until FLUSH is done */
+	}
+
+	/* clear a possible interrupt */
+	/* I think that this CINT is only necessary if you are
+	 * using the terminal count features.   HM 7 Mar 1994
+	 */
+	regs->CINT = 1;
+
+	/* stop DMA */
+	regs->SP_DMA = 1;
+	mb();			/* make sure DMA is stopped before next IO */
+
+	/* restore the CONTROL bits (minus the direction flag) */
+	regs->CNTR = CNTR_PDMD | CNTR_INTEN;
+	mb();			/* make sure CNTR is updated before next IO */
+
+	/* copy from a bounce buffer, if necessary */
+	if (status && wh->dma_bounce_buffer) {
+		if (SCpnt) {
+			if (wh->dma_dir && SCpnt)
+				memcpy(SCpnt->SCp.ptr, wh->dma_bounce_buffer,
+				       SCpnt->SCp.this_residual);
+			kfree(wh->dma_bounce_buffer);
+			wh->dma_bounce_buffer = NULL;
+			wh->dma_bounce_len = 0;
+		} else {
+			kfree(wh->dma_bounce_buffer);
+			wh->dma_bounce_buffer = NULL;
+			wh->dma_bounce_len = 0;
+		}
+	}
+}
+
+static struct scsi_host_template amiga_a3000_scsi_template = {
+	.module			= THIS_MODULE,
+	.name			= "Amiga 3000 built-in SCSI",
+	.show_info		= wd33c93_show_info,
+	.write_info		= wd33c93_write_info,
+	.proc_name		= "A3000",
+	.queuecommand		= wd33c93_queuecommand,
+	.eh_abort_handler	= wd33c93_abort,
+	.eh_host_reset_handler	= wd33c93_host_reset,
+	.can_queue		= CAN_QUEUE,
+	.this_id		= 7,
+	.sg_tablesize		= SG_ALL,
+	.cmd_per_lun		= CMD_PER_LUN,
+};
+
+static int __init amiga_a3000_scsi_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct Scsi_Host *instance;
+	int error;
+	struct a3000_scsiregs *regs;
+	wd33c93_regs wdregs;
+	struct a3000_hostdata *hdata;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENODEV;
+
+	if (!request_mem_region(res->start, resource_size(res), "wd33c93"))
+		return -EBUSY;
+
+	instance = scsi_host_alloc(&amiga_a3000_scsi_template,
+				   sizeof(struct a3000_hostdata));
+	if (!instance) {
+		error = -ENOMEM;
+		goto fail_alloc;
+	}
+
+	instance->irq = IRQ_AMIGA_PORTS;
+
+	regs = ZTWO_VADDR(res->start);
+	regs->DAWR = DAWR_A3000;
+
+	wdregs.SASR = &regs->SASR;
+	wdregs.SCMD = &regs->SCMD;
+
+	hdata = shost_priv(instance);
+	hdata->wh.no_sync = 0xff;
+	hdata->wh.fast = 0;
+	hdata->wh.dma_mode = CTRL_DMA;
+	hdata->regs = regs;
+
+	wd33c93_init(instance, wdregs, dma_setup, dma_stop, WD33C93_FS_12_15);
+	error = request_irq(IRQ_AMIGA_PORTS, a3000_intr, IRQF_SHARED,
+			    "A3000 SCSI", instance);
+	if (error)
+		goto fail_irq;
+
+	regs->CNTR = CNTR_PDMD | CNTR_INTEN;
+
+	error = scsi_add_host(instance, NULL);
+	if (error)
+		goto fail_host;
+
+	platform_set_drvdata(pdev, instance);
+
+	scsi_scan_host(instance);
+	return 0;
+
+fail_host:
+	free_irq(IRQ_AMIGA_PORTS, instance);
+fail_irq:
+	scsi_host_put(instance);
+fail_alloc:
+	release_mem_region(res->start, resource_size(res));
+	return error;
+}
+
+static int __exit amiga_a3000_scsi_remove(struct platform_device *pdev)
+{
+	struct Scsi_Host *instance = platform_get_drvdata(pdev);
+	struct a3000_hostdata *hdata = shost_priv(instance);
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	hdata->regs->CNTR = 0;
+	scsi_remove_host(instance);
+	free_irq(IRQ_AMIGA_PORTS, instance);
+	scsi_host_put(instance);
+	release_mem_region(res->start, resource_size(res));
+	return 0;
+}
+
+static struct platform_driver amiga_a3000_scsi_driver = {
+	.remove = __exit_p(amiga_a3000_scsi_remove),
+	.driver   = {
+		.name	= "amiga-a3000-scsi",
+	},
+};
+
+module_platform_driver_probe(amiga_a3000_scsi_driver, amiga_a3000_scsi_probe);
+
+MODULE_DESCRIPTION("Amiga 3000 built-in SCSI");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:amiga-a3000-scsi");