Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 805 insertions, 0 deletions

diff --git a/drivers/spi/spi-mem.c b/drivers/spi/spi-mem.c
new file mode 100644
index 000000000..4682f49dc
--- /dev/null
+++ b/drivers/spi/spi-mem.c
@@ -0,0 +1,805 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Exceet Electronics GmbH
+ * Copyright (C) 2018 Bootlin
+ *
+ * Author: Boris Brezillon <boris.brezillon@bootlin.com>
+ */
+#include <linux/dmaengine.h>
+#include <linux/pm_runtime.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi-mem.h>
+
+#include "internals.h"
+
+#define SPI_MEM_MAX_BUSWIDTH		8
+
+/**
+ * spi_controller_dma_map_mem_op_data() - DMA-map the buffer attached to a
+ *					  memory operation
+ * @ctlr: the SPI controller requesting this dma_map()
+ * @op: the memory operation containing the buffer to map
+ * @sgt: a pointer to a non-initialized sg_table that will be filled by this
+ *	 function
+ *
+ * Some controllers might want to do DMA on the data buffer embedded in @op.
+ * This helper prepares everything for you and provides a ready-to-use
+ * sg_table. This function is not intended to be called from spi drivers.
+ * Only SPI controller drivers should use it.
+ * Note that the caller must ensure the memory region pointed by
+ * op->data.buf.{in,out} is DMA-able before calling this function.
+ *
+ * Return: 0 in case of success, a negative error code otherwise.
+ */
+int spi_controller_dma_map_mem_op_data(struct spi_controller *ctlr,
+				       const struct spi_mem_op *op,
+				       struct sg_table *sgt)
+{
+	struct device *dmadev;
+
+	if (!op->data.nbytes)
+		return -EINVAL;
+
+	if (op->data.dir == SPI_MEM_DATA_OUT && ctlr->dma_tx)
+		dmadev = ctlr->dma_tx->device->dev;
+	else if (op->data.dir == SPI_MEM_DATA_IN && ctlr->dma_rx)
+		dmadev = ctlr->dma_rx->device->dev;
+	else
+		dmadev = ctlr->dev.parent;
+
+	if (!dmadev)
+		return -EINVAL;
+
+	return spi_map_buf(ctlr, dmadev, sgt, op->data.buf.in, op->data.nbytes,
+			   op->data.dir == SPI_MEM_DATA_IN ?
+			   DMA_FROM_DEVICE : DMA_TO_DEVICE);
+}
+EXPORT_SYMBOL_GPL(spi_controller_dma_map_mem_op_data);
+
+/**
+ * spi_controller_dma_unmap_mem_op_data() - DMA-unmap the buffer attached to a
+ *					    memory operation
+ * @ctlr: the SPI controller requesting this dma_unmap()
+ * @op: the memory operation containing the buffer to unmap
+ * @sgt: a pointer to an sg_table previously initialized by
+ *	 spi_controller_dma_map_mem_op_data()
+ *
+ * Some controllers might want to do DMA on the data buffer embedded in @op.
+ * This helper prepares things so that the CPU can access the
+ * op->data.buf.{in,out} buffer again.
+ *
+ * This function is not intended to be called from SPI drivers. Only SPI
+ * controller drivers should use it.
+ *
+ * This function should be called after the DMA operation has finished and is
+ * only valid if the previous spi_controller_dma_map_mem_op_data() call
+ * returned 0.
+ *
+ * Return: 0 in case of success, a negative error code otherwise.
+ */
+void spi_controller_dma_unmap_mem_op_data(struct spi_controller *ctlr,
+					  const struct spi_mem_op *op,
+					  struct sg_table *sgt)
+{
+	struct device *dmadev;
+
+	if (!op->data.nbytes)
+		return;
+
+	if (op->data.dir == SPI_MEM_DATA_OUT && ctlr->dma_tx)
+		dmadev = ctlr->dma_tx->device->dev;
+	else if (op->data.dir == SPI_MEM_DATA_IN && ctlr->dma_rx)
+		dmadev = ctlr->dma_rx->device->dev;
+	else
+		dmadev = ctlr->dev.parent;
+
+	spi_unmap_buf(ctlr, dmadev, sgt,
+		      op->data.dir == SPI_MEM_DATA_IN ?
+		      DMA_FROM_DEVICE : DMA_TO_DEVICE);
+}
+EXPORT_SYMBOL_GPL(spi_controller_dma_unmap_mem_op_data);
+
+static int spi_check_buswidth_req(struct spi_mem *mem, u8 buswidth, bool tx)
+{
+	u32 mode = mem->spi->mode;
+
+	switch (buswidth) {
+	case 1:
+		return 0;
+
+	case 2:
+		if ((tx &&
+		     (mode & (SPI_TX_DUAL | SPI_TX_QUAD | SPI_TX_OCTAL))) ||
+		    (!tx &&
+		     (mode & (SPI_RX_DUAL | SPI_RX_QUAD | SPI_RX_OCTAL))))
+			return 0;
+
+		break;
+
+	case 4:
+		if ((tx && (mode & (SPI_TX_QUAD | SPI_TX_OCTAL))) ||
+		    (!tx && (mode & (SPI_RX_QUAD | SPI_RX_OCTAL))))
+			return 0;
+
+		break;
+
+	case 8:
+		if ((tx && (mode & SPI_TX_OCTAL)) ||
+		    (!tx && (mode & SPI_RX_OCTAL)))
+			return 0;
+
+		break;
+
+	default:
+		break;
+	}
+
+	return -ENOTSUPP;
+}
+
+bool spi_mem_default_supports_op(struct spi_mem *mem,
+				 const struct spi_mem_op *op)
+{
+	if (spi_check_buswidth_req(mem, op->cmd.buswidth, true))
+		return false;
+
+	if (op->addr.nbytes &&
+	    spi_check_buswidth_req(mem, op->addr.buswidth, true))
+		return false;
+
+	if (op->dummy.nbytes &&
+	    spi_check_buswidth_req(mem, op->dummy.buswidth, true))
+		return false;
+
+	if (op->data.dir != SPI_MEM_NO_DATA &&
+	    spi_check_buswidth_req(mem, op->data.buswidth,
+				   op->data.dir == SPI_MEM_DATA_OUT))
+		return false;
+
+	if (op->cmd.dtr || op->addr.dtr || op->dummy.dtr || op->data.dtr)
+		return false;
+
+	if (op->cmd.nbytes != 1)
+		return false;
+
+	return true;
+}
+EXPORT_SYMBOL_GPL(spi_mem_default_supports_op);
+
+static bool spi_mem_buswidth_is_valid(u8 buswidth)
+{
+	if (hweight8(buswidth) > 1 || buswidth > SPI_MEM_MAX_BUSWIDTH)
+		return false;
+
+	return true;
+}
+
+static int spi_mem_check_op(const struct spi_mem_op *op)
+{
+	if (!op->cmd.buswidth || !op->cmd.nbytes)
+		return -EINVAL;
+
+	if ((op->addr.nbytes && !op->addr.buswidth) ||
+	    (op->dummy.nbytes && !op->dummy.buswidth) ||
+	    (op->data.nbytes && !op->data.buswidth))
+		return -EINVAL;
+
+	if (!spi_mem_buswidth_is_valid(op->cmd.buswidth) ||
+	    !spi_mem_buswidth_is_valid(op->addr.buswidth) ||
+	    !spi_mem_buswidth_is_valid(op->dummy.buswidth) ||
+	    !spi_mem_buswidth_is_valid(op->data.buswidth))
+		return -EINVAL;
+
+	return 0;
+}
+
+static bool spi_mem_internal_supports_op(struct spi_mem *mem,
+					 const struct spi_mem_op *op)
+{
+	struct spi_controller *ctlr = mem->spi->controller;
+
+	if (ctlr->mem_ops && ctlr->mem_ops->supports_op)
+		return ctlr->mem_ops->supports_op(mem, op);
+
+	return spi_mem_default_supports_op(mem, op);
+}
+
+/**
+ * spi_mem_supports_op() - Check if a memory device and the controller it is
+ *			   connected to support a specific memory operation
+ * @mem: the SPI memory
+ * @op: the memory operation to check
+ *
+ * Some controllers are only supporting Single or Dual IOs, others might only
+ * support specific opcodes, or it can even be that the controller and device
+ * both support Quad IOs but the hardware prevents you from using it because
+ * only 2 IO lines are connected.
+ *
+ * This function checks whether a specific operation is supported.
+ *
+ * Return: true if @op is supported, false otherwise.
+ */
+bool spi_mem_supports_op(struct spi_mem *mem, const struct spi_mem_op *op)
+{
+	if (spi_mem_check_op(op))
+		return false;
+
+	return spi_mem_internal_supports_op(mem, op);
+}
+EXPORT_SYMBOL_GPL(spi_mem_supports_op);
+
+static int spi_mem_access_start(struct spi_mem *mem)
+{
+	struct spi_controller *ctlr = mem->spi->controller;
+
+	/*
+	 * Flush the message queue before executing our SPI memory
+	 * operation to prevent preemption of regular SPI transfers.
+	 */
+	spi_flush_queue(ctlr);
+
+	if (ctlr->auto_runtime_pm) {
+		int ret;
+
+		ret = pm_runtime_get_sync(ctlr->dev.parent);
+		if (ret < 0) {
+			pm_runtime_put_noidle(ctlr->dev.parent);
+			dev_err(&ctlr->dev, "Failed to power device: %d\n",
+				ret);
+			return ret;
+		}
+	}
+
+	mutex_lock(&ctlr->bus_lock_mutex);
+	mutex_lock(&ctlr->io_mutex);
+
+	return 0;
+}
+
+static void spi_mem_access_end(struct spi_mem *mem)
+{
+	struct spi_controller *ctlr = mem->spi->controller;
+
+	mutex_unlock(&ctlr->io_mutex);
+	mutex_unlock(&ctlr->bus_lock_mutex);
+
+	if (ctlr->auto_runtime_pm)
+		pm_runtime_put(ctlr->dev.parent);
+}
+
+/**
+ * spi_mem_exec_op() - Execute a memory operation
+ * @mem: the SPI memory
+ * @op: the memory operation to execute
+ *
+ * Executes a memory operation.
+ *
+ * This function first checks that @op is supported and then tries to execute
+ * it.
+ *
+ * Return: 0 in case of success, a negative error code otherwise.
+ */
+int spi_mem_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
+{
+	unsigned int tmpbufsize, xferpos = 0, totalxferlen = 0;
+	struct spi_controller *ctlr = mem->spi->controller;
+	struct spi_transfer xfers[4] = { };
+	struct spi_message msg;
+	u8 *tmpbuf;
+	int ret;
+
+	ret = spi_mem_check_op(op);
+	if (ret)
+		return ret;
+
+	if (!spi_mem_internal_supports_op(mem, op))
+		return -ENOTSUPP;
+
+	if (ctlr->mem_ops && !mem->spi->cs_gpiod) {
+		ret = spi_mem_access_start(mem);
+		if (ret)
+			return ret;
+
+		ret = ctlr->mem_ops->exec_op(mem, op);
+
+		spi_mem_access_end(mem);
+
+		/*
+		 * Some controllers only optimize specific paths (typically the
+		 * read path) and expect the core to use the regular SPI
+		 * interface in other cases.
+		 */
+		if (!ret || ret != -ENOTSUPP)
+			return ret;
+	}
+
+	tmpbufsize = op->cmd.nbytes + op->addr.nbytes + op->dummy.nbytes;
+
+	/*
+	 * Allocate a buffer to transmit the CMD, ADDR cycles with kmalloc() so
+	 * we're guaranteed that this buffer is DMA-able, as required by the
+	 * SPI layer.
+	 */
+	tmpbuf = kzalloc(tmpbufsize, GFP_KERNEL | GFP_DMA);
+	if (!tmpbuf)
+		return -ENOMEM;
+
+	spi_message_init(&msg);
+
+	tmpbuf[0] = op->cmd.opcode;
+	xfers[xferpos].tx_buf = tmpbuf;
+	xfers[xferpos].len = op->cmd.nbytes;
+	xfers[xferpos].tx_nbits = op->cmd.buswidth;
+	spi_message_add_tail(&xfers[xferpos], &msg);
+	xferpos++;
+	totalxferlen++;
+
+	if (op->addr.nbytes) {
+		int i;
+
+		for (i = 0; i < op->addr.nbytes; i++)
+			tmpbuf[i + 1] = op->addr.val >>
+					(8 * (op->addr.nbytes - i - 1));
+
+		xfers[xferpos].tx_buf = tmpbuf + 1;
+		xfers[xferpos].len = op->addr.nbytes;
+		xfers[xferpos].tx_nbits = op->addr.buswidth;
+		spi_message_add_tail(&xfers[xferpos], &msg);
+		xferpos++;
+		totalxferlen += op->addr.nbytes;
+	}
+
+	if (op->dummy.nbytes) {
+		memset(tmpbuf + op->addr.nbytes + 1, 0xff, op->dummy.nbytes);
+		xfers[xferpos].tx_buf = tmpbuf + op->addr.nbytes + 1;
+		xfers[xferpos].len = op->dummy.nbytes;
+		xfers[xferpos].tx_nbits = op->dummy.buswidth;
+		spi_message_add_tail(&xfers[xferpos], &msg);
+		xferpos++;
+		totalxferlen += op->dummy.nbytes;
+	}
+
+	if (op->data.nbytes) {
+		if (op->data.dir == SPI_MEM_DATA_IN) {
+			xfers[xferpos].rx_buf = op->data.buf.in;
+			xfers[xferpos].rx_nbits = op->data.buswidth;
+		} else {
+			xfers[xferpos].tx_buf = op->data.buf.out;
+			xfers[xferpos].tx_nbits = op->data.buswidth;
+		}
+
+		xfers[xferpos].len = op->data.nbytes;
+		spi_message_add_tail(&xfers[xferpos], &msg);
+		xferpos++;
+		totalxferlen += op->data.nbytes;
+	}
+
+	ret = spi_sync(mem->spi, &msg);
+
+	kfree(tmpbuf);
+
+	if (ret)
+		return ret;
+
+	if (msg.actual_length != totalxferlen)
+		return -EIO;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(spi_mem_exec_op);
+
+/**
+ * spi_mem_get_name() - Return the SPI mem device name to be used by the
+ *			upper layer if necessary
+ * @mem: the SPI memory
+ *
+ * This function allows SPI mem users to retrieve the SPI mem device name.
+ * It is useful if the upper layer needs to expose a custom name for
+ * compatibility reasons.
+ *
+ * Return: a string containing the name of the memory device to be used
+ *	   by the SPI mem user
+ */
+const char *spi_mem_get_name(struct spi_mem *mem)
+{
+	return mem->name;
+}
+EXPORT_SYMBOL_GPL(spi_mem_get_name);
+
+/**
+ * spi_mem_adjust_op_size() - Adjust the data size of a SPI mem operation to
+ *			      match controller limitations
+ * @mem: the SPI memory
+ * @op: the operation to adjust
+ *
+ * Some controllers have FIFO limitations and must split a data transfer
+ * operation into multiple ones, others require a specific alignment for
+ * optimized accesses. This function allows SPI mem drivers to split a single
+ * operation into multiple sub-operations when required.
+ *
+ * Return: a negative error code if the controller can't properly adjust @op,
+ *	   0 otherwise. Note that @op->data.nbytes will be updated if @op
+ *	   can't be handled in a single step.
+ */
+int spi_mem_adjust_op_size(struct spi_mem *mem, struct spi_mem_op *op)
+{
+	struct spi_controller *ctlr = mem->spi->controller;
+	size_t len;
+
+	if (ctlr->mem_ops && ctlr->mem_ops->adjust_op_size)
+		return ctlr->mem_ops->adjust_op_size(mem, op);
+
+	if (!ctlr->mem_ops || !ctlr->mem_ops->exec_op) {
+		len = op->cmd.nbytes + op->addr.nbytes + op->dummy.nbytes;
+
+		if (len > spi_max_transfer_size(mem->spi))
+			return -EINVAL;
+
+		op->data.nbytes = min3((size_t)op->data.nbytes,
+				       spi_max_transfer_size(mem->spi),
+				       spi_max_message_size(mem->spi) -
+				       len);
+		if (!op->data.nbytes)
+			return -EINVAL;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(spi_mem_adjust_op_size);
+
+static ssize_t spi_mem_no_dirmap_read(struct spi_mem_dirmap_desc *desc,
+				      u64 offs, size_t len, void *buf)
+{
+	struct spi_mem_op op = desc->info.op_tmpl;
+	int ret;
+
+	op.addr.val = desc->info.offset + offs;
+	op.data.buf.in = buf;
+	op.data.nbytes = len;
+	ret = spi_mem_adjust_op_size(desc->mem, &op);
+	if (ret)
+		return ret;
+
+	ret = spi_mem_exec_op(desc->mem, &op);
+	if (ret)
+		return ret;
+
+	return op.data.nbytes;
+}
+
+static ssize_t spi_mem_no_dirmap_write(struct spi_mem_dirmap_desc *desc,
+				       u64 offs, size_t len, const void *buf)
+{
+	struct spi_mem_op op = desc->info.op_tmpl;
+	int ret;
+
+	op.addr.val = desc->info.offset + offs;
+	op.data.buf.out = buf;
+	op.data.nbytes = len;
+	ret = spi_mem_adjust_op_size(desc->mem, &op);
+	if (ret)
+		return ret;
+
+	ret = spi_mem_exec_op(desc->mem, &op);
+	if (ret)
+		return ret;
+
+	return op.data.nbytes;
+}
+
+/**
+ * spi_mem_dirmap_create() - Create a direct mapping descriptor
+ * @mem: SPI mem device this direct mapping should be created for
+ * @info: direct mapping information
+ *
+ * This function is creating a direct mapping descriptor which can then be used
+ * to access the memory using spi_mem_dirmap_read() or spi_mem_dirmap_write().
+ * If the SPI controller driver does not support direct mapping, this function
+ * falls back to an implementation using spi_mem_exec_op(), so that the caller
+ * doesn't have to bother implementing a fallback on his own.
+ *
+ * Return: a valid pointer in case of success, and ERR_PTR() otherwise.
+ */
+struct spi_mem_dirmap_desc *
+spi_mem_dirmap_create(struct spi_mem *mem,
+		      const struct spi_mem_dirmap_info *info)
+{
+	struct spi_controller *ctlr = mem->spi->controller;
+	struct spi_mem_dirmap_desc *desc;
+	int ret = -ENOTSUPP;
+
+	/* Make sure the number of address cycles is between 1 and 8 bytes. */
+	if (!info->op_tmpl.addr.nbytes || info->op_tmpl.addr.nbytes > 8)
+		return ERR_PTR(-EINVAL);
+
+	/* data.dir should either be SPI_MEM_DATA_IN or SPI_MEM_DATA_OUT. */
+	if (info->op_tmpl.data.dir == SPI_MEM_NO_DATA)
+		return ERR_PTR(-EINVAL);
+
+	desc = kzalloc(sizeof(*desc), GFP_KERNEL);
+	if (!desc)
+		return ERR_PTR(-ENOMEM);
+
+	desc->mem = mem;
+	desc->info = *info;
+	if (ctlr->mem_ops && ctlr->mem_ops->dirmap_create)
+		ret = ctlr->mem_ops->dirmap_create(desc);
+
+	if (ret) {
+		desc->nodirmap = true;
+		if (!spi_mem_supports_op(desc->mem, &desc->info.op_tmpl))
+			ret = -ENOTSUPP;
+		else
+			ret = 0;
+	}
+
+	if (ret) {
+		kfree(desc);
+		return ERR_PTR(ret);
+	}
+
+	return desc;
+}
+EXPORT_SYMBOL_GPL(spi_mem_dirmap_create);
+
+/**
+ * spi_mem_dirmap_destroy() - Destroy a direct mapping descriptor
+ * @desc: the direct mapping descriptor to destroy
+ *
+ * This function destroys a direct mapping descriptor previously created by
+ * spi_mem_dirmap_create().
+ */
+void spi_mem_dirmap_destroy(struct spi_mem_dirmap_desc *desc)
+{
+	struct spi_controller *ctlr = desc->mem->spi->controller;
+
+	if (!desc->nodirmap && ctlr->mem_ops && ctlr->mem_ops->dirmap_destroy)
+		ctlr->mem_ops->dirmap_destroy(desc);
+
+	kfree(desc);
+}
+EXPORT_SYMBOL_GPL(spi_mem_dirmap_destroy);
+
+static void devm_spi_mem_dirmap_release(struct device *dev, void *res)
+{
+	struct spi_mem_dirmap_desc *desc = *(struct spi_mem_dirmap_desc **)res;
+
+	spi_mem_dirmap_destroy(desc);
+}
+
+/**
+ * devm_spi_mem_dirmap_create() - Create a direct mapping descriptor and attach
+ *				  it to a device
+ * @dev: device the dirmap desc will be attached to
+ * @mem: SPI mem device this direct mapping should be created for
+ * @info: direct mapping information
+ *
+ * devm_ variant of the spi_mem_dirmap_create() function. See
+ * spi_mem_dirmap_create() for more details.
+ *
+ * Return: a valid pointer in case of success, and ERR_PTR() otherwise.
+ */
+struct spi_mem_dirmap_desc *
+devm_spi_mem_dirmap_create(struct device *dev, struct spi_mem *mem,
+			   const struct spi_mem_dirmap_info *info)
+{
+	struct spi_mem_dirmap_desc **ptr, *desc;
+
+	ptr = devres_alloc(devm_spi_mem_dirmap_release, sizeof(*ptr),
+			   GFP_KERNEL);
+	if (!ptr)
+		return ERR_PTR(-ENOMEM);
+
+	desc = spi_mem_dirmap_create(mem, info);
+	if (IS_ERR(desc)) {
+		devres_free(ptr);
+	} else {
+		*ptr = desc;
+		devres_add(dev, ptr);
+	}
+
+	return desc;
+}
+EXPORT_SYMBOL_GPL(devm_spi_mem_dirmap_create);
+
+static int devm_spi_mem_dirmap_match(struct device *dev, void *res, void *data)
+{
+        struct spi_mem_dirmap_desc **ptr = res;
+
+        if (WARN_ON(!ptr || !*ptr))
+                return 0;
+
+	return *ptr == data;
+}
+
+/**
+ * devm_spi_mem_dirmap_destroy() - Destroy a direct mapping descriptor attached
+ *				   to a device
+ * @dev: device the dirmap desc is attached to
+ * @desc: the direct mapping descriptor to destroy
+ *
+ * devm_ variant of the spi_mem_dirmap_destroy() function. See
+ * spi_mem_dirmap_destroy() for more details.
+ */
+void devm_spi_mem_dirmap_destroy(struct device *dev,
+				 struct spi_mem_dirmap_desc *desc)
+{
+	devres_release(dev, devm_spi_mem_dirmap_release,
+		       devm_spi_mem_dirmap_match, desc);
+}
+EXPORT_SYMBOL_GPL(devm_spi_mem_dirmap_destroy);
+
+/**
+ * spi_mem_dirmap_read() - Read data through a direct mapping
+ * @desc: direct mapping descriptor
+ * @offs: offset to start reading from. Note that this is not an absolute
+ *	  offset, but the offset within the direct mapping which already has
+ *	  its own offset
+ * @len: length in bytes
+ * @buf: destination buffer. This buffer must be DMA-able
+ *
+ * This function reads data from a memory device using a direct mapping
+ * previously instantiated with spi_mem_dirmap_create().
+ *
+ * Return: the amount of data read from the memory device or a negative error
+ * code. Note that the returned size might be smaller than @len, and the caller
+ * is responsible for calling spi_mem_dirmap_read() again when that happens.
+ */
+ssize_t spi_mem_dirmap_read(struct spi_mem_dirmap_desc *desc,
+			    u64 offs, size_t len, void *buf)
+{
+	struct spi_controller *ctlr = desc->mem->spi->controller;
+	ssize_t ret;
+
+	if (desc->info.op_tmpl.data.dir != SPI_MEM_DATA_IN)
+		return -EINVAL;
+
+	if (!len)
+		return 0;
+
+	if (desc->nodirmap) {
+		ret = spi_mem_no_dirmap_read(desc, offs, len, buf);
+	} else if (ctlr->mem_ops && ctlr->mem_ops->dirmap_read) {
+		ret = spi_mem_access_start(desc->mem);
+		if (ret)
+			return ret;
+
+		ret = ctlr->mem_ops->dirmap_read(desc, offs, len, buf);
+
+		spi_mem_access_end(desc->mem);
+	} else {
+		ret = -ENOTSUPP;
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(spi_mem_dirmap_read);
+
+/**
+ * spi_mem_dirmap_write() - Write data through a direct mapping
+ * @desc: direct mapping descriptor
+ * @offs: offset to start writing from. Note that this is not an absolute
+ *	  offset, but the offset within the direct mapping which already has
+ *	  its own offset
+ * @len: length in bytes
+ * @buf: source buffer. This buffer must be DMA-able
+ *
+ * This function writes data to a memory device using a direct mapping
+ * previously instantiated with spi_mem_dirmap_create().
+ *
+ * Return: the amount of data written to the memory device or a negative error
+ * code. Note that the returned size might be smaller than @len, and the caller
+ * is responsible for calling spi_mem_dirmap_write() again when that happens.
+ */
+ssize_t spi_mem_dirmap_write(struct spi_mem_dirmap_desc *desc,
+			     u64 offs, size_t len, const void *buf)
+{
+	struct spi_controller *ctlr = desc->mem->spi->controller;
+	ssize_t ret;
+
+	if (desc->info.op_tmpl.data.dir != SPI_MEM_DATA_OUT)
+		return -EINVAL;
+
+	if (!len)
+		return 0;
+
+	if (desc->nodirmap) {
+		ret = spi_mem_no_dirmap_write(desc, offs, len, buf);
+	} else if (ctlr->mem_ops && ctlr->mem_ops->dirmap_write) {
+		ret = spi_mem_access_start(desc->mem);
+		if (ret)
+			return ret;
+
+		ret = ctlr->mem_ops->dirmap_write(desc, offs, len, buf);
+
+		spi_mem_access_end(desc->mem);
+	} else {
+		ret = -ENOTSUPP;
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(spi_mem_dirmap_write);
+
+static inline struct spi_mem_driver *to_spi_mem_drv(struct device_driver *drv)
+{
+	return container_of(drv, struct spi_mem_driver, spidrv.driver);
+}
+
+static int spi_mem_probe(struct spi_device *spi)
+{
+	struct spi_mem_driver *memdrv = to_spi_mem_drv(spi->dev.driver);
+	struct spi_controller *ctlr = spi->controller;
+	struct spi_mem *mem;
+
+	mem = devm_kzalloc(&spi->dev, sizeof(*mem), GFP_KERNEL);
+	if (!mem)
+		return -ENOMEM;
+
+	mem->spi = spi;
+
+	if (ctlr->mem_ops && ctlr->mem_ops->get_name)
+		mem->name = ctlr->mem_ops->get_name(mem);
+	else
+		mem->name = dev_name(&spi->dev);
+
+	if (IS_ERR_OR_NULL(mem->name))
+		return PTR_ERR(mem->name);
+
+	spi_set_drvdata(spi, mem);
+
+	return memdrv->probe(mem);
+}
+
+static int spi_mem_remove(struct spi_device *spi)
+{
+	struct spi_mem_driver *memdrv = to_spi_mem_drv(spi->dev.driver);
+	struct spi_mem *mem = spi_get_drvdata(spi);
+
+	if (memdrv->remove)
+		return memdrv->remove(mem);
+
+	return 0;
+}
+
+static void spi_mem_shutdown(struct spi_device *spi)
+{
+	struct spi_mem_driver *memdrv = to_spi_mem_drv(spi->dev.driver);
+	struct spi_mem *mem = spi_get_drvdata(spi);
+
+	if (memdrv->shutdown)
+		memdrv->shutdown(mem);
+}
+
+/**
+ * spi_mem_driver_register_with_owner() - Register a SPI memory driver
+ * @memdrv: the SPI memory driver to register
+ * @owner: the owner of this driver
+ *
+ * Registers a SPI memory driver.
+ *
+ * Return: 0 in case of success, a negative error core otherwise.
+ */
+
+int spi_mem_driver_register_with_owner(struct spi_mem_driver *memdrv,
+				       struct module *owner)
+{
+	memdrv->spidrv.probe = spi_mem_probe;
+	memdrv->spidrv.remove = spi_mem_remove;
+	memdrv->spidrv.shutdown = spi_mem_shutdown;
+
+	return __spi_register_driver(owner, &memdrv->spidrv);
+}
+EXPORT_SYMBOL_GPL(spi_mem_driver_register_with_owner);
+
+/**
+ * spi_mem_driver_unregister_with_owner() - Unregister a SPI memory driver
+ * @memdrv: the SPI memory driver to unregister
+ *
+ * Unregisters a SPI memory driver.
+ */
+void spi_mem_driver_unregister(struct spi_mem_driver *memdrv)
+{
+	spi_unregister_driver(&memdrv->spidrv);
+}
+EXPORT_SYMBOL_GPL(spi_mem_driver_unregister);