Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 5621 insertions, 0 deletions

diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
new file mode 100644
index 000000000..14925fedb
--- /dev/null
+++ b/drivers/usb/dwc2/hcd.c
@@ -0,0 +1,5621 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * hcd.c - DesignWare HS OTG Controller host-mode routines
+ *
+ * Copyright (C) 2004-2013 Synopsys, Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. The names of the above-listed copyright holders may not be used
+ *    to endorse or promote products derived from this software without
+ *    specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation; either version 2 of the License, or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * This file contains the core HCD code, and implements the Linux hc_driver
+ * API
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+
+#include <linux/usb/hcd.h>
+#include <linux/usb/ch11.h>
+
+#include "core.h"
+#include "hcd.h"
+
+static void dwc2_port_resume(struct dwc2_hsotg *hsotg);
+
+/*
+ * =========================================================================
+ *  Host Core Layer Functions
+ * =========================================================================
+ */
+
+/**
+ * dwc2_enable_common_interrupts() - Initializes the commmon interrupts,
+ * used in both device and host modes
+ *
+ * @hsotg: Programming view of the DWC_otg controller
+ */
+static void dwc2_enable_common_interrupts(struct dwc2_hsotg *hsotg)
+{
+	u32 intmsk;
+
+	/* Clear any pending OTG Interrupts */
+	dwc2_writel(hsotg, 0xffffffff, GOTGINT);
+
+	/* Clear any pending interrupts */
+	dwc2_writel(hsotg, 0xffffffff, GINTSTS);
+
+	/* Enable the interrupts in the GINTMSK */
+	intmsk = GINTSTS_MODEMIS | GINTSTS_OTGINT;
+
+	if (!hsotg->params.host_dma)
+		intmsk |= GINTSTS_RXFLVL;
+	if (!hsotg->params.external_id_pin_ctl)
+		intmsk |= GINTSTS_CONIDSTSCHNG;
+
+	intmsk |= GINTSTS_WKUPINT | GINTSTS_USBSUSP |
+		  GINTSTS_SESSREQINT;
+
+	if (dwc2_is_device_mode(hsotg) && hsotg->params.lpm)
+		intmsk |= GINTSTS_LPMTRANRCVD;
+
+	dwc2_writel(hsotg, intmsk, GINTMSK);
+}
+
+static int dwc2_gahbcfg_init(struct dwc2_hsotg *hsotg)
+{
+	u32 ahbcfg = dwc2_readl(hsotg, GAHBCFG);
+
+	switch (hsotg->hw_params.arch) {
+	case GHWCFG2_EXT_DMA_ARCH:
+		dev_err(hsotg->dev, "External DMA Mode not supported\n");
+		return -EINVAL;
+
+	case GHWCFG2_INT_DMA_ARCH:
+		dev_dbg(hsotg->dev, "Internal DMA Mode\n");
+		if (hsotg->params.ahbcfg != -1) {
+			ahbcfg &= GAHBCFG_CTRL_MASK;
+			ahbcfg |= hsotg->params.ahbcfg &
+				  ~GAHBCFG_CTRL_MASK;
+		}
+		break;
+
+	case GHWCFG2_SLAVE_ONLY_ARCH:
+	default:
+		dev_dbg(hsotg->dev, "Slave Only Mode\n");
+		break;
+	}
+
+	if (hsotg->params.host_dma)
+		ahbcfg |= GAHBCFG_DMA_EN;
+	else
+		hsotg->params.dma_desc_enable = false;
+
+	dwc2_writel(hsotg, ahbcfg, GAHBCFG);
+
+	return 0;
+}
+
+static void dwc2_gusbcfg_init(struct dwc2_hsotg *hsotg)
+{
+	u32 usbcfg;
+
+	usbcfg = dwc2_readl(hsotg, GUSBCFG);
+	usbcfg &= ~(GUSBCFG_HNPCAP | GUSBCFG_SRPCAP);
+
+	switch (hsotg->hw_params.op_mode) {
+	case GHWCFG2_OP_MODE_HNP_SRP_CAPABLE:
+		if (hsotg->params.otg_cap ==
+				DWC2_CAP_PARAM_HNP_SRP_CAPABLE)
+			usbcfg |= GUSBCFG_HNPCAP;
+		if (hsotg->params.otg_cap !=
+				DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE)
+			usbcfg |= GUSBCFG_SRPCAP;
+		break;
+
+	case GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE:
+	case GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE:
+	case GHWCFG2_OP_MODE_SRP_CAPABLE_HOST:
+		if (hsotg->params.otg_cap !=
+				DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE)
+			usbcfg |= GUSBCFG_SRPCAP;
+		break;
+
+	case GHWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE:
+	case GHWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE:
+	case GHWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST:
+	default:
+		break;
+	}
+
+	dwc2_writel(hsotg, usbcfg, GUSBCFG);
+}
+
+static int dwc2_vbus_supply_init(struct dwc2_hsotg *hsotg)
+{
+	if (hsotg->vbus_supply)
+		return regulator_enable(hsotg->vbus_supply);
+
+	return 0;
+}
+
+static int dwc2_vbus_supply_exit(struct dwc2_hsotg *hsotg)
+{
+	if (hsotg->vbus_supply)
+		return regulator_disable(hsotg->vbus_supply);
+
+	return 0;
+}
+
+/**
+ * dwc2_enable_host_interrupts() - Enables the Host mode interrupts
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ */
+static void dwc2_enable_host_interrupts(struct dwc2_hsotg *hsotg)
+{
+	u32 intmsk;
+
+	dev_dbg(hsotg->dev, "%s()\n", __func__);
+
+	/* Disable all interrupts */
+	dwc2_writel(hsotg, 0, GINTMSK);
+	dwc2_writel(hsotg, 0, HAINTMSK);
+
+	/* Enable the common interrupts */
+	dwc2_enable_common_interrupts(hsotg);
+
+	/* Enable host mode interrupts without disturbing common interrupts */
+	intmsk = dwc2_readl(hsotg, GINTMSK);
+	intmsk |= GINTSTS_DISCONNINT | GINTSTS_PRTINT | GINTSTS_HCHINT;
+	dwc2_writel(hsotg, intmsk, GINTMSK);
+}
+
+/**
+ * dwc2_disable_host_interrupts() - Disables the Host Mode interrupts
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ */
+static void dwc2_disable_host_interrupts(struct dwc2_hsotg *hsotg)
+{
+	u32 intmsk = dwc2_readl(hsotg, GINTMSK);
+
+	/* Disable host mode interrupts without disturbing common interrupts */
+	intmsk &= ~(GINTSTS_SOF | GINTSTS_PRTINT | GINTSTS_HCHINT |
+		    GINTSTS_PTXFEMP | GINTSTS_NPTXFEMP | GINTSTS_DISCONNINT);
+	dwc2_writel(hsotg, intmsk, GINTMSK);
+}
+
+/*
+ * dwc2_calculate_dynamic_fifo() - Calculates the default fifo size
+ * For system that have a total fifo depth that is smaller than the default
+ * RX + TX fifo size.
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ */
+static void dwc2_calculate_dynamic_fifo(struct dwc2_hsotg *hsotg)
+{
+	struct dwc2_core_params *params = &hsotg->params;
+	struct dwc2_hw_params *hw = &hsotg->hw_params;
+	u32 rxfsiz, nptxfsiz, ptxfsiz, total_fifo_size;
+
+	total_fifo_size = hw->total_fifo_size;
+	rxfsiz = params->host_rx_fifo_size;
+	nptxfsiz = params->host_nperio_tx_fifo_size;
+	ptxfsiz = params->host_perio_tx_fifo_size;
+
+	/*
+	 * Will use Method 2 defined in the DWC2 spec: minimum FIFO depth
+	 * allocation with support for high bandwidth endpoints. Synopsys
+	 * defines MPS(Max Packet size) for a periodic EP=1024, and for
+	 * non-periodic as 512.
+	 */
+	if (total_fifo_size < (rxfsiz + nptxfsiz + ptxfsiz)) {
+		/*
+		 * For Buffer DMA mode/Scatter Gather DMA mode
+		 * 2 * ((Largest Packet size / 4) + 1 + 1) + n
+		 * with n = number of host channel.
+		 * 2 * ((1024/4) + 2) = 516
+		 */
+		rxfsiz = 516 + hw->host_channels;
+
+		/*
+		 * min non-periodic tx fifo depth
+		 * 2 * (largest non-periodic USB packet used / 4)
+		 * 2 * (512/4) = 256
+		 */
+		nptxfsiz = 256;
+
+		/*
+		 * min periodic tx fifo depth
+		 * (largest packet size*MC)/4
+		 * (1024 * 3)/4 = 768
+		 */
+		ptxfsiz = 768;
+
+		params->host_rx_fifo_size = rxfsiz;
+		params->host_nperio_tx_fifo_size = nptxfsiz;
+		params->host_perio_tx_fifo_size = ptxfsiz;
+	}
+
+	/*
+	 * If the summation of RX, NPTX and PTX fifo sizes is still
+	 * bigger than the total_fifo_size, then we have a problem.
+	 *
+	 * We won't be able to allocate as many endpoints. Right now,
+	 * we're just printing an error message, but ideally this FIFO
+	 * allocation algorithm would be improved in the future.
+	 *
+	 * FIXME improve this FIFO allocation algorithm.
+	 */
+	if (unlikely(total_fifo_size < (rxfsiz + nptxfsiz + ptxfsiz)))
+		dev_err(hsotg->dev, "invalid fifo sizes\n");
+}
+
+static void dwc2_config_fifos(struct dwc2_hsotg *hsotg)
+{
+	struct dwc2_core_params *params = &hsotg->params;
+	u32 nptxfsiz, hptxfsiz, dfifocfg, grxfsiz;
+
+	if (!params->enable_dynamic_fifo)
+		return;
+
+	dwc2_calculate_dynamic_fifo(hsotg);
+
+	/* Rx FIFO */
+	grxfsiz = dwc2_readl(hsotg, GRXFSIZ);
+	dev_dbg(hsotg->dev, "initial grxfsiz=%08x\n", grxfsiz);
+	grxfsiz &= ~GRXFSIZ_DEPTH_MASK;
+	grxfsiz |= params->host_rx_fifo_size <<
+		   GRXFSIZ_DEPTH_SHIFT & GRXFSIZ_DEPTH_MASK;
+	dwc2_writel(hsotg, grxfsiz, GRXFSIZ);
+	dev_dbg(hsotg->dev, "new grxfsiz=%08x\n",
+		dwc2_readl(hsotg, GRXFSIZ));
+
+	/* Non-periodic Tx FIFO */
+	dev_dbg(hsotg->dev, "initial gnptxfsiz=%08x\n",
+		dwc2_readl(hsotg, GNPTXFSIZ));
+	nptxfsiz = params->host_nperio_tx_fifo_size <<
+		   FIFOSIZE_DEPTH_SHIFT & FIFOSIZE_DEPTH_MASK;
+	nptxfsiz |= params->host_rx_fifo_size <<
+		    FIFOSIZE_STARTADDR_SHIFT & FIFOSIZE_STARTADDR_MASK;
+	dwc2_writel(hsotg, nptxfsiz, GNPTXFSIZ);
+	dev_dbg(hsotg->dev, "new gnptxfsiz=%08x\n",
+		dwc2_readl(hsotg, GNPTXFSIZ));
+
+	/* Periodic Tx FIFO */
+	dev_dbg(hsotg->dev, "initial hptxfsiz=%08x\n",
+		dwc2_readl(hsotg, HPTXFSIZ));
+	hptxfsiz = params->host_perio_tx_fifo_size <<
+		   FIFOSIZE_DEPTH_SHIFT & FIFOSIZE_DEPTH_MASK;
+	hptxfsiz |= (params->host_rx_fifo_size +
+		     params->host_nperio_tx_fifo_size) <<
+		    FIFOSIZE_STARTADDR_SHIFT & FIFOSIZE_STARTADDR_MASK;
+	dwc2_writel(hsotg, hptxfsiz, HPTXFSIZ);
+	dev_dbg(hsotg->dev, "new hptxfsiz=%08x\n",
+		dwc2_readl(hsotg, HPTXFSIZ));
+
+	if (hsotg->params.en_multiple_tx_fifo &&
+	    hsotg->hw_params.snpsid >= DWC2_CORE_REV_2_91a) {
+		/*
+		 * This feature was implemented in 2.91a version
+		 * Global DFIFOCFG calculation for Host mode -
+		 * include RxFIFO, NPTXFIFO and HPTXFIFO
+		 */
+		dfifocfg = dwc2_readl(hsotg, GDFIFOCFG);
+		dfifocfg &= ~GDFIFOCFG_EPINFOBASE_MASK;
+		dfifocfg |= (params->host_rx_fifo_size +
+			     params->host_nperio_tx_fifo_size +
+			     params->host_perio_tx_fifo_size) <<
+			    GDFIFOCFG_EPINFOBASE_SHIFT &
+			    GDFIFOCFG_EPINFOBASE_MASK;
+		dwc2_writel(hsotg, dfifocfg, GDFIFOCFG);
+	}
+}
+
+/**
+ * dwc2_calc_frame_interval() - Calculates the correct frame Interval value for
+ * the HFIR register according to PHY type and speed
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ *
+ * NOTE: The caller can modify the value of the HFIR register only after the
+ * Port Enable bit of the Host Port Control and Status register (HPRT.EnaPort)
+ * has been set
+ */
+u32 dwc2_calc_frame_interval(struct dwc2_hsotg *hsotg)
+{
+	u32 usbcfg;
+	u32 hprt0;
+	int clock = 60;	/* default value */
+
+	usbcfg = dwc2_readl(hsotg, GUSBCFG);
+	hprt0 = dwc2_readl(hsotg, HPRT0);
+
+	if (!(usbcfg & GUSBCFG_PHYSEL) && (usbcfg & GUSBCFG_ULPI_UTMI_SEL) &&
+	    !(usbcfg & GUSBCFG_PHYIF16))
+		clock = 60;
+	if ((usbcfg & GUSBCFG_PHYSEL) && hsotg->hw_params.fs_phy_type ==
+	    GHWCFG2_FS_PHY_TYPE_SHARED_ULPI)
+		clock = 48;
+	if (!(usbcfg & GUSBCFG_PHY_LP_CLK_SEL) && !(usbcfg & GUSBCFG_PHYSEL) &&
+	    !(usbcfg & GUSBCFG_ULPI_UTMI_SEL) && (usbcfg & GUSBCFG_PHYIF16))
+		clock = 30;
+	if (!(usbcfg & GUSBCFG_PHY_LP_CLK_SEL) && !(usbcfg & GUSBCFG_PHYSEL) &&
+	    !(usbcfg & GUSBCFG_ULPI_UTMI_SEL) && !(usbcfg & GUSBCFG_PHYIF16))
+		clock = 60;
+	if ((usbcfg & GUSBCFG_PHY_LP_CLK_SEL) && !(usbcfg & GUSBCFG_PHYSEL) &&
+	    !(usbcfg & GUSBCFG_ULPI_UTMI_SEL) && (usbcfg & GUSBCFG_PHYIF16))
+		clock = 48;
+	if ((usbcfg & GUSBCFG_PHYSEL) && !(usbcfg & GUSBCFG_PHYIF16) &&
+	    hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_SHARED_UTMI)
+		clock = 48;
+	if ((usbcfg & GUSBCFG_PHYSEL) &&
+	    hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED)
+		clock = 48;
+
+	if ((hprt0 & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT == HPRT0_SPD_HIGH_SPEED)
+		/* High speed case */
+		return 125 * clock - 1;
+
+	/* FS/LS case */
+	return 1000 * clock - 1;
+}
+
+/**
+ * dwc2_read_packet() - Reads a packet from the Rx FIFO into the destination
+ * buffer
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ * @dest:    Destination buffer for the packet
+ * @bytes:   Number of bytes to copy to the destination
+ */
+void dwc2_read_packet(struct dwc2_hsotg *hsotg, u8 *dest, u16 bytes)
+{
+	u32 *data_buf = (u32 *)dest;
+	int word_count = (bytes + 3) / 4;
+	int i;
+
+	/*
+	 * Todo: Account for the case where dest is not dword aligned. This
+	 * requires reading data from the FIFO into a u32 temp buffer, then
+	 * moving it into the data buffer.
+	 */
+
+	dev_vdbg(hsotg->dev, "%s(%p,%p,%d)\n", __func__, hsotg, dest, bytes);
+
+	for (i = 0; i < word_count; i++, data_buf++)
+		*data_buf = dwc2_readl(hsotg, HCFIFO(0));
+}
+
+/**
+ * dwc2_dump_channel_info() - Prints the state of a host channel
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ * @chan:  Pointer to the channel to dump
+ *
+ * Must be called with interrupt disabled and spinlock held
+ *
+ * NOTE: This function will be removed once the peripheral controller code
+ * is integrated and the driver is stable
+ */
+static void dwc2_dump_channel_info(struct dwc2_hsotg *hsotg,
+				   struct dwc2_host_chan *chan)
+{
+#ifdef VERBOSE_DEBUG
+	int num_channels = hsotg->params.host_channels;
+	struct dwc2_qh *qh;
+	u32 hcchar;
+	u32 hcsplt;
+	u32 hctsiz;
+	u32 hc_dma;
+	int i;
+
+	if (!chan)
+		return;
+
+	hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num));
+	hcsplt = dwc2_readl(hsotg, HCSPLT(chan->hc_num));
+	hctsiz = dwc2_readl(hsotg, HCTSIZ(chan->hc_num));
+	hc_dma = dwc2_readl(hsotg, HCDMA(chan->hc_num));
+
+	dev_dbg(hsotg->dev, "  Assigned to channel %p:\n", chan);
+	dev_dbg(hsotg->dev, "    hcchar 0x%08x, hcsplt 0x%08x\n",
+		hcchar, hcsplt);
+	dev_dbg(hsotg->dev, "    hctsiz 0x%08x, hc_dma 0x%08x\n",
+		hctsiz, hc_dma);
+	dev_dbg(hsotg->dev, "    dev_addr: %d, ep_num: %d, ep_is_in: %d\n",
+		chan->dev_addr, chan->ep_num, chan->ep_is_in);
+	dev_dbg(hsotg->dev, "    ep_type: %d\n", chan->ep_type);
+	dev_dbg(hsotg->dev, "    max_packet: %d\n", chan->max_packet);
+	dev_dbg(hsotg->dev, "    data_pid_start: %d\n", chan->data_pid_start);
+	dev_dbg(hsotg->dev, "    xfer_started: %d\n", chan->xfer_started);
+	dev_dbg(hsotg->dev, "    halt_status: %d\n", chan->halt_status);
+	dev_dbg(hsotg->dev, "    xfer_buf: %p\n", chan->xfer_buf);
+	dev_dbg(hsotg->dev, "    xfer_dma: %08lx\n",
+		(unsigned long)chan->xfer_dma);
+	dev_dbg(hsotg->dev, "    xfer_len: %d\n", chan->xfer_len);
+	dev_dbg(hsotg->dev, "    qh: %p\n", chan->qh);
+	dev_dbg(hsotg->dev, "  NP inactive sched:\n");
+	list_for_each_entry(qh, &hsotg->non_periodic_sched_inactive,
+			    qh_list_entry)
+		dev_dbg(hsotg->dev, "    %p\n", qh);
+	dev_dbg(hsotg->dev, "  NP waiting sched:\n");
+	list_for_each_entry(qh, &hsotg->non_periodic_sched_waiting,
+			    qh_list_entry)
+		dev_dbg(hsotg->dev, "    %p\n", qh);
+	dev_dbg(hsotg->dev, "  NP active sched:\n");
+	list_for_each_entry(qh, &hsotg->non_periodic_sched_active,
+			    qh_list_entry)
+		dev_dbg(hsotg->dev, "    %p\n", qh);
+	dev_dbg(hsotg->dev, "  Channels:\n");
+	for (i = 0; i < num_channels; i++) {
+		struct dwc2_host_chan *chan = hsotg->hc_ptr_array[i];
+
+		dev_dbg(hsotg->dev, "    %2d: %p\n", i, chan);
+	}
+#endif /* VERBOSE_DEBUG */
+}
+
+static int _dwc2_hcd_start(struct usb_hcd *hcd);
+
+static void dwc2_host_start(struct dwc2_hsotg *hsotg)
+{
+	struct usb_hcd *hcd = dwc2_hsotg_to_hcd(hsotg);
+
+	hcd->self.is_b_host = dwc2_hcd_is_b_host(hsotg);
+	_dwc2_hcd_start(hcd);
+}
+
+static void dwc2_host_disconnect(struct dwc2_hsotg *hsotg)
+{
+	struct usb_hcd *hcd = dwc2_hsotg_to_hcd(hsotg);
+
+	hcd->self.is_b_host = 0;
+}
+
+static void dwc2_host_hub_info(struct dwc2_hsotg *hsotg, void *context,
+			       int *hub_addr, int *hub_port)
+{
+	struct urb *urb = context;
+
+	if (urb->dev->tt)
+		*hub_addr = urb->dev->tt->hub->devnum;
+	else
+		*hub_addr = 0;
+	*hub_port = urb->dev->ttport;
+}
+
+/*
+ * =========================================================================
+ *  Low Level Host Channel Access Functions
+ * =========================================================================
+ */
+
+static void dwc2_hc_enable_slave_ints(struct dwc2_hsotg *hsotg,
+				      struct dwc2_host_chan *chan)
+{
+	u32 hcintmsk = HCINTMSK_CHHLTD;
+
+	switch (chan->ep_type) {
+	case USB_ENDPOINT_XFER_CONTROL:
+	case USB_ENDPOINT_XFER_BULK:
+		dev_vdbg(hsotg->dev, "control/bulk\n");
+		hcintmsk |= HCINTMSK_XFERCOMPL;
+		hcintmsk |= HCINTMSK_STALL;
+		hcintmsk |= HCINTMSK_XACTERR;
+		hcintmsk |= HCINTMSK_DATATGLERR;
+		if (chan->ep_is_in) {
+			hcintmsk |= HCINTMSK_BBLERR;
+		} else {
+			hcintmsk |= HCINTMSK_NAK;
+			hcintmsk |= HCINTMSK_NYET;
+			if (chan->do_ping)
+				hcintmsk |= HCINTMSK_ACK;
+		}
+
+		if (chan->do_split) {
+			hcintmsk |= HCINTMSK_NAK;
+			if (chan->complete_split)
+				hcintmsk |= HCINTMSK_NYET;
+			else
+				hcintmsk |= HCINTMSK_ACK;
+		}
+
+		if (chan->error_state)
+			hcintmsk |= HCINTMSK_ACK;
+		break;
+
+	case USB_ENDPOINT_XFER_INT:
+		if (dbg_perio())
+			dev_vdbg(hsotg->dev, "intr\n");
+		hcintmsk |= HCINTMSK_XFERCOMPL;
+		hcintmsk |= HCINTMSK_NAK;
+		hcintmsk |= HCINTMSK_STALL;
+		hcintmsk |= HCINTMSK_XACTERR;
+		hcintmsk |= HCINTMSK_DATATGLERR;
+		hcintmsk |= HCINTMSK_FRMOVRUN;
+
+		if (chan->ep_is_in)
+			hcintmsk |= HCINTMSK_BBLERR;
+		if (chan->error_state)
+			hcintmsk |= HCINTMSK_ACK;
+		if (chan->do_split) {
+			if (chan->complete_split)
+				hcintmsk |= HCINTMSK_NYET;
+			else
+				hcintmsk |= HCINTMSK_ACK;
+		}
+		break;
+
+	case USB_ENDPOINT_XFER_ISOC:
+		if (dbg_perio())
+			dev_vdbg(hsotg->dev, "isoc\n");
+		hcintmsk |= HCINTMSK_XFERCOMPL;
+		hcintmsk |= HCINTMSK_FRMOVRUN;
+		hcintmsk |= HCINTMSK_ACK;
+
+		if (chan->ep_is_in) {
+			hcintmsk |= HCINTMSK_XACTERR;
+			hcintmsk |= HCINTMSK_BBLERR;
+		}
+		break;
+	default:
+		dev_err(hsotg->dev, "## Unknown EP type ##\n");
+		break;
+	}
+
+	dwc2_writel(hsotg, hcintmsk, HCINTMSK(chan->hc_num));
+	if (dbg_hc(chan))
+		dev_vdbg(hsotg->dev, "set HCINTMSK to %08x\n", hcintmsk);
+}
+
+static void dwc2_hc_enable_dma_ints(struct dwc2_hsotg *hsotg,
+				    struct dwc2_host_chan *chan)
+{
+	u32 hcintmsk = HCINTMSK_CHHLTD;
+
+	/*
+	 * For Descriptor DMA mode core halts the channel on AHB error.
+	 * Interrupt is not required.
+	 */
+	if (!hsotg->params.dma_desc_enable) {
+		if (dbg_hc(chan))
+			dev_vdbg(hsotg->dev, "desc DMA disabled\n");
+		hcintmsk |= HCINTMSK_AHBERR;
+	} else {
+		if (dbg_hc(chan))
+			dev_vdbg(hsotg->dev, "desc DMA enabled\n");
+		if (chan->ep_type == USB_ENDPOINT_XFER_ISOC)
+			hcintmsk |= HCINTMSK_XFERCOMPL;
+	}
+
+	if (chan->error_state && !chan->do_split &&
+	    chan->ep_type != USB_ENDPOINT_XFER_ISOC) {
+		if (dbg_hc(chan))
+			dev_vdbg(hsotg->dev, "setting ACK\n");
+		hcintmsk |= HCINTMSK_ACK;
+		if (chan->ep_is_in) {
+			hcintmsk |= HCINTMSK_DATATGLERR;
+			if (chan->ep_type != USB_ENDPOINT_XFER_INT)
+				hcintmsk |= HCINTMSK_NAK;
+		}
+	}
+
+	dwc2_writel(hsotg, hcintmsk, HCINTMSK(chan->hc_num));
+	if (dbg_hc(chan))
+		dev_vdbg(hsotg->dev, "set HCINTMSK to %08x\n", hcintmsk);
+}
+
+static void dwc2_hc_enable_ints(struct dwc2_hsotg *hsotg,
+				struct dwc2_host_chan *chan)
+{
+	u32 intmsk;
+
+	if (hsotg->params.host_dma) {
+		if (dbg_hc(chan))
+			dev_vdbg(hsotg->dev, "DMA enabled\n");
+		dwc2_hc_enable_dma_ints(hsotg, chan);
+	} else {
+		if (dbg_hc(chan))
+			dev_vdbg(hsotg->dev, "DMA disabled\n");
+		dwc2_hc_enable_slave_ints(hsotg, chan);
+	}
+
+	/* Enable the top level host channel interrupt */
+	intmsk = dwc2_readl(hsotg, HAINTMSK);
+	intmsk |= 1 << chan->hc_num;
+	dwc2_writel(hsotg, intmsk, HAINTMSK);
+	if (dbg_hc(chan))
+		dev_vdbg(hsotg->dev, "set HAINTMSK to %08x\n", intmsk);
+
+	/* Make sure host channel interrupts are enabled */
+	intmsk = dwc2_readl(hsotg, GINTMSK);
+	intmsk |= GINTSTS_HCHINT;
+	dwc2_writel(hsotg, intmsk, GINTMSK);
+	if (dbg_hc(chan))
+		dev_vdbg(hsotg->dev, "set GINTMSK to %08x\n", intmsk);
+}
+
+/**
+ * dwc2_hc_init() - Prepares a host channel for transferring packets to/from
+ * a specific endpoint
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ * @chan:  Information needed to initialize the host channel
+ *
+ * The HCCHARn register is set up with the characteristics specified in chan.
+ * Host channel interrupts that may need to be serviced while this transfer is
+ * in progress are enabled.
+ */
+static void dwc2_hc_init(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan)
+{
+	u8 hc_num = chan->hc_num;
+	u32 hcintmsk;
+	u32 hcchar;
+	u32 hcsplt = 0;
+
+	if (dbg_hc(chan))
+		dev_vdbg(hsotg->dev, "%s()\n", __func__);
+
+	/* Clear old interrupt conditions for this host channel */
+	hcintmsk = 0xffffffff;
+	hcintmsk &= ~HCINTMSK_RESERVED14_31;
+	dwc2_writel(hsotg, hcintmsk, HCINT(hc_num));
+
+	/* Enable channel interrupts required for this transfer */
+	dwc2_hc_enable_ints(hsotg, chan);
+
+	/*
+	 * Program the HCCHARn register with the endpoint characteristics for
+	 * the current transfer
+	 */
+	hcchar = chan->dev_addr << HCCHAR_DEVADDR_SHIFT & HCCHAR_DEVADDR_MASK;
+	hcchar |= chan->ep_num << HCCHAR_EPNUM_SHIFT & HCCHAR_EPNUM_MASK;
+	if (chan->ep_is_in)
+		hcchar |= HCCHAR_EPDIR;
+	if (chan->speed == USB_SPEED_LOW)
+		hcchar |= HCCHAR_LSPDDEV;
+	hcchar |= chan->ep_type << HCCHAR_EPTYPE_SHIFT & HCCHAR_EPTYPE_MASK;
+	hcchar |= chan->max_packet << HCCHAR_MPS_SHIFT & HCCHAR_MPS_MASK;
+	dwc2_writel(hsotg, hcchar, HCCHAR(hc_num));
+	if (dbg_hc(chan)) {
+		dev_vdbg(hsotg->dev, "set HCCHAR(%d) to %08x\n",
+			 hc_num, hcchar);
+
+		dev_vdbg(hsotg->dev, "%s: Channel %d\n",
+			 __func__, hc_num);
+		dev_vdbg(hsotg->dev, "	 Dev Addr: %d\n",
+			 chan->dev_addr);
+		dev_vdbg(hsotg->dev, "	 Ep Num: %d\n",
+			 chan->ep_num);
+		dev_vdbg(hsotg->dev, "	 Is In: %d\n",
+			 chan->ep_is_in);
+		dev_vdbg(hsotg->dev, "	 Is Low Speed: %d\n",
+			 chan->speed == USB_SPEED_LOW);
+		dev_vdbg(hsotg->dev, "	 Ep Type: %d\n",
+			 chan->ep_type);
+		dev_vdbg(hsotg->dev, "	 Max Pkt: %d\n",
+			 chan->max_packet);
+	}
+
+	/* Program the HCSPLT register for SPLITs */
+	if (chan->do_split) {
+		if (dbg_hc(chan))
+			dev_vdbg(hsotg->dev,
+				 "Programming HC %d with split --> %s\n",
+				 hc_num,
+				 chan->complete_split ? "CSPLIT" : "SSPLIT");
+		if (chan->complete_split)
+			hcsplt |= HCSPLT_COMPSPLT;
+		hcsplt |= chan->xact_pos << HCSPLT_XACTPOS_SHIFT &
+			  HCSPLT_XACTPOS_MASK;
+		hcsplt |= chan->hub_addr << HCSPLT_HUBADDR_SHIFT &
+			  HCSPLT_HUBADDR_MASK;
+		hcsplt |= chan->hub_port << HCSPLT_PRTADDR_SHIFT &
+			  HCSPLT_PRTADDR_MASK;
+		if (dbg_hc(chan)) {
+			dev_vdbg(hsotg->dev, "	  comp split %d\n",
+				 chan->complete_split);
+			dev_vdbg(hsotg->dev, "	  xact pos %d\n",
+				 chan->xact_pos);
+			dev_vdbg(hsotg->dev, "	  hub addr %d\n",
+				 chan->hub_addr);
+			dev_vdbg(hsotg->dev, "	  hub port %d\n",
+				 chan->hub_port);
+			dev_vdbg(hsotg->dev, "	  is_in %d\n",
+				 chan->ep_is_in);
+			dev_vdbg(hsotg->dev, "	  Max Pkt %d\n",
+				 chan->max_packet);
+			dev_vdbg(hsotg->dev, "	  xferlen %d\n",
+				 chan->xfer_len);
+		}
+	}
+
+	dwc2_writel(hsotg, hcsplt, HCSPLT(hc_num));
+}
+
+/**
+ * dwc2_hc_halt() - Attempts to halt a host channel
+ *
+ * @hsotg:       Controller register interface
+ * @chan:        Host channel to halt
+ * @halt_status: Reason for halting the channel
+ *
+ * This function should only be called in Slave mode or to abort a transfer in
+ * either Slave mode or DMA mode. Under normal circumstances in DMA mode, the
+ * controller halts the channel when the transfer is complete or a condition
+ * occurs that requires application intervention.
+ *
+ * In slave mode, checks for a free request queue entry, then sets the Channel
+ * Enable and Channel Disable bits of the Host Channel Characteristics
+ * register of the specified channel to intiate the halt. If there is no free
+ * request queue entry, sets only the Channel Disable bit of the HCCHARn
+ * register to flush requests for this channel. In the latter case, sets a
+ * flag to indicate that the host channel needs to be halted when a request
+ * queue slot is open.
+ *
+ * In DMA mode, always sets the Channel Enable and Channel Disable bits of the
+ * HCCHARn register. The controller ensures there is space in the request
+ * queue before submitting the halt request.
+ *
+ * Some time may elapse before the core flushes any posted requests for this
+ * host channel and halts. The Channel Halted interrupt handler completes the
+ * deactivation of the host channel.
+ */
+void dwc2_hc_halt(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan,
+		  enum dwc2_halt_status halt_status)
+{
+	u32 nptxsts, hptxsts, hcchar;
+
+	if (dbg_hc(chan))
+		dev_vdbg(hsotg->dev, "%s()\n", __func__);
+
+	/*
+	 * In buffer DMA or external DMA mode channel can't be halted
+	 * for non-split periodic channels. At the end of the next
+	 * uframe/frame (in the worst case), the core generates a channel
+	 * halted and disables the channel automatically.
+	 */
+	if ((hsotg->params.g_dma && !hsotg->params.g_dma_desc) ||
+	    hsotg->hw_params.arch == GHWCFG2_EXT_DMA_ARCH) {
+		if (!chan->do_split &&
+		    (chan->ep_type == USB_ENDPOINT_XFER_ISOC ||
+		     chan->ep_type == USB_ENDPOINT_XFER_INT)) {
+			dev_err(hsotg->dev, "%s() Channel can't be halted\n",
+				__func__);
+			return;
+		}
+	}
+
+	if (halt_status == DWC2_HC_XFER_NO_HALT_STATUS)
+		dev_err(hsotg->dev, "!!! halt_status = %d !!!\n", halt_status);
+
+	if (halt_status == DWC2_HC_XFER_URB_DEQUEUE ||
+	    halt_status == DWC2_HC_XFER_AHB_ERR) {
+		/*
+		 * Disable all channel interrupts except Ch Halted. The QTD
+		 * and QH state associated with this transfer has been cleared
+		 * (in the case of URB_DEQUEUE), so the channel needs to be
+		 * shut down carefully to prevent crashes.
+		 */
+		u32 hcintmsk = HCINTMSK_CHHLTD;
+
+		dev_vdbg(hsotg->dev, "dequeue/error\n");
+		dwc2_writel(hsotg, hcintmsk, HCINTMSK(chan->hc_num));
+
+		/*
+		 * Make sure no other interrupts besides halt are currently
+		 * pending. Handling another interrupt could cause a crash due
+		 * to the QTD and QH state.
+		 */
+		dwc2_writel(hsotg, ~hcintmsk, HCINT(chan->hc_num));
+
+		/*
+		 * Make sure the halt status is set to URB_DEQUEUE or AHB_ERR
+		 * even if the channel was already halted for some other
+		 * reason
+		 */
+		chan->halt_status = halt_status;
+
+		hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num));
+		if (!(hcchar & HCCHAR_CHENA)) {
+			/*
+			 * The channel is either already halted or it hasn't
+			 * started yet. In DMA mode, the transfer may halt if
+			 * it finishes normally or a condition occurs that
+			 * requires driver intervention. Don't want to halt
+			 * the channel again. In either Slave or DMA mode,
+			 * it's possible that the transfer has been assigned
+			 * to a channel, but not started yet when an URB is
+			 * dequeued. Don't want to halt a channel that hasn't
+			 * started yet.
+			 */
+			return;
+		}
+	}
+	if (chan->halt_pending) {
+		/*
+		 * A halt has already been issued for this channel. This might
+		 * happen when a transfer is aborted by a higher level in
+		 * the stack.
+		 */
+		dev_vdbg(hsotg->dev,
+			 "*** %s: Channel %d, chan->halt_pending already set ***\n",
+			 __func__, chan->hc_num);
+		return;
+	}
+
+	hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num));
+
+	/* No need to set the bit in DDMA for disabling the channel */
+	/* TODO check it everywhere channel is disabled */
+	if (!hsotg->params.dma_desc_enable) {
+		if (dbg_hc(chan))
+			dev_vdbg(hsotg->dev, "desc DMA disabled\n");
+		hcchar |= HCCHAR_CHENA;
+	} else {
+		if (dbg_hc(chan))
+			dev_dbg(hsotg->dev, "desc DMA enabled\n");
+	}
+	hcchar |= HCCHAR_CHDIS;
+
+	if (!hsotg->params.host_dma) {
+		if (dbg_hc(chan))
+			dev_vdbg(hsotg->dev, "DMA not enabled\n");
+		hcchar |= HCCHAR_CHENA;
+
+		/* Check for space in the request queue to issue the halt */
+		if (chan->ep_type == USB_ENDPOINT_XFER_CONTROL ||
+		    chan->ep_type == USB_ENDPOINT_XFER_BULK) {
+			dev_vdbg(hsotg->dev, "control/bulk\n");
+			nptxsts = dwc2_readl(hsotg, GNPTXSTS);
+			if ((nptxsts & TXSTS_QSPCAVAIL_MASK) == 0) {
+				dev_vdbg(hsotg->dev, "Disabling channel\n");
+				hcchar &= ~HCCHAR_CHENA;
+			}
+		} else {
+			if (dbg_perio())
+				dev_vdbg(hsotg->dev, "isoc/intr\n");
+			hptxsts = dwc2_readl(hsotg, HPTXSTS);
+			if ((hptxsts & TXSTS_QSPCAVAIL_MASK) == 0 ||
+			    hsotg->queuing_high_bandwidth) {
+				if (dbg_perio())
+					dev_vdbg(hsotg->dev, "Disabling channel\n");
+				hcchar &= ~HCCHAR_CHENA;
+			}
+		}
+	} else {
+		if (dbg_hc(chan))
+			dev_vdbg(hsotg->dev, "DMA enabled\n");
+	}
+
+	dwc2_writel(hsotg, hcchar, HCCHAR(chan->hc_num));
+	chan->halt_status = halt_status;
+
+	if (hcchar & HCCHAR_CHENA) {
+		if (dbg_hc(chan))
+			dev_vdbg(hsotg->dev, "Channel enabled\n");
+		chan->halt_pending = 1;
+		chan->halt_on_queue = 0;
+	} else {
+		if (dbg_hc(chan))
+			dev_vdbg(hsotg->dev, "Channel disabled\n");
+		chan->halt_on_queue = 1;
+	}
+
+	if (dbg_hc(chan)) {
+		dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__,
+			 chan->hc_num);
+		dev_vdbg(hsotg->dev, "	 hcchar: 0x%08x\n",
+			 hcchar);
+		dev_vdbg(hsotg->dev, "	 halt_pending: %d\n",
+			 chan->halt_pending);
+		dev_vdbg(hsotg->dev, "	 halt_on_queue: %d\n",
+			 chan->halt_on_queue);
+		dev_vdbg(hsotg->dev, "	 halt_status: %d\n",
+			 chan->halt_status);
+	}
+}
+
+/**
+ * dwc2_hc_cleanup() - Clears the transfer state for a host channel
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ * @chan:  Identifies the host channel to clean up
+ *
+ * This function is normally called after a transfer is done and the host
+ * channel is being released
+ */
+void dwc2_hc_cleanup(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan)
+{
+	u32 hcintmsk;
+
+	chan->xfer_started = 0;
+
+	list_del_init(&chan->split_order_list_entry);
+
+	/*
+	 * Clear channel interrupt enables and any unhandled channel interrupt
+	 * conditions
+	 */
+	dwc2_writel(hsotg, 0, HCINTMSK(chan->hc_num));
+	hcintmsk = 0xffffffff;
+	hcintmsk &= ~HCINTMSK_RESERVED14_31;
+	dwc2_writel(hsotg, hcintmsk, HCINT(chan->hc_num));
+}
+
+/**
+ * dwc2_hc_set_even_odd_frame() - Sets the channel property that indicates in
+ * which frame a periodic transfer should occur
+ *
+ * @hsotg:  Programming view of DWC_otg controller
+ * @chan:   Identifies the host channel to set up and its properties
+ * @hcchar: Current value of the HCCHAR register for the specified host channel
+ *
+ * This function has no effect on non-periodic transfers
+ */
+static void dwc2_hc_set_even_odd_frame(struct dwc2_hsotg *hsotg,
+				       struct dwc2_host_chan *chan, u32 *hcchar)
+{
+	if (chan->ep_type == USB_ENDPOINT_XFER_INT ||
+	    chan->ep_type == USB_ENDPOINT_XFER_ISOC) {
+		int host_speed;
+		int xfer_ns;
+		int xfer_us;
+		int bytes_in_fifo;
+		u16 fifo_space;
+		u16 frame_number;
+		u16 wire_frame;
+
+		/*
+		 * Try to figure out if we're an even or odd frame. If we set
+		 * even and the current frame number is even the the transfer
+		 * will happen immediately.  Similar if both are odd. If one is
+		 * even and the other is odd then the transfer will happen when
+		 * the frame number ticks.
+		 *
+		 * There's a bit of a balancing act to get this right.
+		 * Sometimes we may want to send data in the current frame (AK
+		 * right away).  We might want to do this if the frame number
+		 * _just_ ticked, but we might also want to do this in order
+		 * to continue a split transaction that happened late in a
+		 * microframe (so we didn't know to queue the next transfer
+		 * until the frame number had ticked).  The problem is that we
+		 * need a lot of knowledge to know if there's actually still
+		 * time to send things or if it would be better to wait until
+		 * the next frame.
+		 *
+		 * We can look at how much time is left in the current frame
+		 * and make a guess about whether we'll have time to transfer.
+		 * We'll do that.
+		 */
+
+		/* Get speed host is running at */
+		host_speed = (chan->speed != USB_SPEED_HIGH &&
+			      !chan->do_split) ? chan->speed : USB_SPEED_HIGH;
+
+		/* See how many bytes are in the periodic FIFO right now */
+		fifo_space = (dwc2_readl(hsotg, HPTXSTS) &
+			      TXSTS_FSPCAVAIL_MASK) >> TXSTS_FSPCAVAIL_SHIFT;
+		bytes_in_fifo = sizeof(u32) *
+				(hsotg->params.host_perio_tx_fifo_size -
+				 fifo_space);
+
+		/*
+		 * Roughly estimate bus time for everything in the periodic
+		 * queue + our new transfer.  This is "rough" because we're
+		 * using a function that makes takes into account IN/OUT
+		 * and INT/ISO and we're just slamming in one value for all
+		 * transfers.  This should be an over-estimate and that should
+		 * be OK, but we can probably tighten it.
+		 */
+		xfer_ns = usb_calc_bus_time(host_speed, false, false,
+					    chan->xfer_len + bytes_in_fifo);
+		xfer_us = NS_TO_US(xfer_ns);
+
+		/* See what frame number we'll be at by the time we finish */
+		frame_number = dwc2_hcd_get_future_frame_number(hsotg, xfer_us);
+
+		/* This is when we were scheduled to be on the wire */
+		wire_frame = dwc2_frame_num_inc(chan->qh->next_active_frame, 1);
+
+		/*
+		 * If we'd finish _after_ the frame we're scheduled in then
+		 * it's hopeless.  Just schedule right away and hope for the
+		 * best.  Note that it _might_ be wise to call back into the
+		 * scheduler to pick a better frame, but this is better than
+		 * nothing.
+		 */
+		if (dwc2_frame_num_gt(frame_number, wire_frame)) {
+			dwc2_sch_vdbg(hsotg,
+				      "QH=%p EO MISS fr=%04x=>%04x (%+d)\n",
+				      chan->qh, wire_frame, frame_number,
+				      dwc2_frame_num_dec(frame_number,
+							 wire_frame));
+			wire_frame = frame_number;
+
+			/*
+			 * We picked a different frame number; communicate this
+			 * back to the scheduler so it doesn't try to schedule
+			 * another in the same frame.
+			 *
+			 * Remember that next_active_frame is 1 before the wire
+			 * frame.
+			 */
+			chan->qh->next_active_frame =
+				dwc2_frame_num_dec(frame_number, 1);
+		}
+
+		if (wire_frame & 1)
+			*hcchar |= HCCHAR_ODDFRM;
+		else
+			*hcchar &= ~HCCHAR_ODDFRM;
+	}
+}
+
+static void dwc2_set_pid_isoc(struct dwc2_host_chan *chan)
+{
+	/* Set up the initial PID for the transfer */
+	if (chan->speed == USB_SPEED_HIGH) {
+		if (chan->ep_is_in) {
+			if (chan->multi_count == 1)
+				chan->data_pid_start = DWC2_HC_PID_DATA0;
+			else if (chan->multi_count == 2)
+				chan->data_pid_start = DWC2_HC_PID_DATA1;
+			else
+				chan->data_pid_start = DWC2_HC_PID_DATA2;
+		} else {
+			if (chan->multi_count == 1)
+				chan->data_pid_start = DWC2_HC_PID_DATA0;
+			else
+				chan->data_pid_start = DWC2_HC_PID_MDATA;
+		}
+	} else {
+		chan->data_pid_start = DWC2_HC_PID_DATA0;
+	}
+}
+
+/**
+ * dwc2_hc_write_packet() - Writes a packet into the Tx FIFO associated with
+ * the Host Channel
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ * @chan:  Information needed to initialize the host channel
+ *
+ * This function should only be called in Slave mode. For a channel associated
+ * with a non-periodic EP, the non-periodic Tx FIFO is written. For a channel
+ * associated with a periodic EP, the periodic Tx FIFO is written.
+ *
+ * Upon return the xfer_buf and xfer_count fields in chan are incremented by
+ * the number of bytes written to the Tx FIFO.
+ */
+static void dwc2_hc_write_packet(struct dwc2_hsotg *hsotg,
+				 struct dwc2_host_chan *chan)
+{
+	u32 i;
+	u32 remaining_count;
+	u32 byte_count;
+	u32 dword_count;
+	u32 *data_buf = (u32 *)chan->xfer_buf;
+
+	if (dbg_hc(chan))
+		dev_vdbg(hsotg->dev, "%s()\n", __func__);
+
+	remaining_count = chan->xfer_len - chan->xfer_count;
+	if (remaining_count > chan->max_packet)
+		byte_count = chan->max_packet;
+	else
+		byte_count = remaining_count;
+
+	dword_count = (byte_count + 3) / 4;
+
+	if (((unsigned long)data_buf & 0x3) == 0) {
+		/* xfer_buf is DWORD aligned */
+		for (i = 0; i < dword_count; i++, data_buf++)
+			dwc2_writel(hsotg, *data_buf, HCFIFO(chan->hc_num));
+	} else {
+		/* xfer_buf is not DWORD aligned */
+		for (i = 0; i < dword_count; i++, data_buf++) {
+			u32 data = data_buf[0] | data_buf[1] << 8 |
+				   data_buf[2] << 16 | data_buf[3] << 24;
+			dwc2_writel(hsotg, data, HCFIFO(chan->hc_num));
+		}
+	}
+
+	chan->xfer_count += byte_count;
+	chan->xfer_buf += byte_count;
+}
+
+/**
+ * dwc2_hc_do_ping() - Starts a PING transfer
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ * @chan:  Information needed to initialize the host channel
+ *
+ * This function should only be called in Slave mode. The Do Ping bit is set in
+ * the HCTSIZ register, then the channel is enabled.
+ */
+static void dwc2_hc_do_ping(struct dwc2_hsotg *hsotg,
+			    struct dwc2_host_chan *chan)
+{
+	u32 hcchar;
+	u32 hctsiz;
+
+	if (dbg_hc(chan))
+		dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__,
+			 chan->hc_num);
+
+	hctsiz = TSIZ_DOPNG;
+	hctsiz |= 1 << TSIZ_PKTCNT_SHIFT;
+	dwc2_writel(hsotg, hctsiz, HCTSIZ(chan->hc_num));
+
+	hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num));
+	hcchar |= HCCHAR_CHENA;
+	hcchar &= ~HCCHAR_CHDIS;
+	dwc2_writel(hsotg, hcchar, HCCHAR(chan->hc_num));
+}
+
+/**
+ * dwc2_hc_start_transfer() - Does the setup for a data transfer for a host
+ * channel and starts the transfer
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ * @chan:  Information needed to initialize the host channel. The xfer_len value
+ *         may be reduced to accommodate the max widths of the XferSize and
+ *         PktCnt fields in the HCTSIZn register. The multi_count value may be
+ *         changed to reflect the final xfer_len value.
+ *
+ * This function may be called in either Slave mode or DMA mode. In Slave mode,
+ * the caller must ensure that there is sufficient space in the request queue
+ * and Tx Data FIFO.
+ *
+ * For an OUT transfer in Slave mode, it loads a data packet into the
+ * appropriate FIFO. If necessary, additional data packets are loaded in the
+ * Host ISR.
+ *
+ * For an IN transfer in Slave mode, a data packet is requested. The data
+ * packets are unloaded from the Rx FIFO in the Host ISR. If necessary,
+ * additional data packets are requested in the Host ISR.
+ *
+ * For a PING transfer in Slave mode, the Do Ping bit is set in the HCTSIZ
+ * register along with a packet count of 1 and the channel is enabled. This
+ * causes a single PING transaction to occur. Other fields in HCTSIZ are
+ * simply set to 0 since no data transfer occurs in this case.
+ *
+ * For a PING transfer in DMA mode, the HCTSIZ register is initialized with
+ * all the information required to perform the subsequent data transfer. In
+ * addition, the Do Ping bit is set in the HCTSIZ register. In this case, the
+ * controller performs the entire PING protocol, then starts the data
+ * transfer.
+ */
+static void dwc2_hc_start_transfer(struct dwc2_hsotg *hsotg,
+				   struct dwc2_host_chan *chan)
+{
+	u32 max_hc_xfer_size = hsotg->params.max_transfer_size;
+	u16 max_hc_pkt_count = hsotg->params.max_packet_count;
+	u32 hcchar;
+	u32 hctsiz = 0;
+	u16 num_packets;
+	u32 ec_mc;
+
+	if (dbg_hc(chan))
+		dev_vdbg(hsotg->dev, "%s()\n", __func__);
+
+	if (chan->do_ping) {
+		if (!hsotg->params.host_dma) {
+			if (dbg_hc(chan))
+				dev_vdbg(hsotg->dev, "ping, no DMA\n");
+			dwc2_hc_do_ping(hsotg, chan);
+			chan->xfer_started = 1;
+			return;
+		}
+
+		if (dbg_hc(chan))
+			dev_vdbg(hsotg->dev, "ping, DMA\n");
+
+		hctsiz |= TSIZ_DOPNG;
+	}
+
+	if (chan->do_split) {
+		if (dbg_hc(chan))
+			dev_vdbg(hsotg->dev, "split\n");
+		num_packets = 1;
+
+		if (chan->complete_split && !chan->ep_is_in)
+			/*
+			 * For CSPLIT OUT Transfer, set the size to 0 so the
+			 * core doesn't expect any data written to the FIFO
+			 */
+			chan->xfer_len = 0;
+		else if (chan->ep_is_in || chan->xfer_len > chan->max_packet)
+			chan->xfer_len = chan->max_packet;
+		else if (!chan->ep_is_in && chan->xfer_len > 188)
+			chan->xfer_len = 188;
+
+		hctsiz |= chan->xfer_len << TSIZ_XFERSIZE_SHIFT &
+			  TSIZ_XFERSIZE_MASK;
+
+		/* For split set ec_mc for immediate retries */
+		if (chan->ep_type == USB_ENDPOINT_XFER_INT ||
+		    chan->ep_type == USB_ENDPOINT_XFER_ISOC)
+			ec_mc = 3;
+		else
+			ec_mc = 1;
+	} else {
+		if (dbg_hc(chan))
+			dev_vdbg(hsotg->dev, "no split\n");
+		/*
+		 * Ensure that the transfer length and packet count will fit
+		 * in the widths allocated for them in the HCTSIZn register
+		 */
+		if (chan->ep_type == USB_ENDPOINT_XFER_INT ||
+		    chan->ep_type == USB_ENDPOINT_XFER_ISOC) {
+			/*
+			 * Make sure the transfer size is no larger than one
+			 * (micro)frame's worth of data. (A check was done
+			 * when the periodic transfer was accepted to ensure
+			 * that a (micro)frame's worth of data can be
+			 * programmed into a channel.)
+			 */
+			u32 max_periodic_len =
+				chan->multi_count * chan->max_packet;
+
+			if (chan->xfer_len > max_periodic_len)
+				chan->xfer_len = max_periodic_len;
+		} else if (chan->xfer_len > max_hc_xfer_size) {
+			/*
+			 * Make sure that xfer_len is a multiple of max packet
+			 * size
+			 */
+			chan->xfer_len =
+				max_hc_xfer_size - chan->max_packet + 1;
+		}
+
+		if (chan->xfer_len > 0) {
+			num_packets = (chan->xfer_len + chan->max_packet - 1) /
+					chan->max_packet;
+			if (num_packets > max_hc_pkt_count) {
+				num_packets = max_hc_pkt_count;
+				chan->xfer_len = num_packets * chan->max_packet;
+			} else if (chan->ep_is_in) {
+				/*
+				 * Always program an integral # of max packets
+				 * for IN transfers.
+				 * Note: This assumes that the input buffer is
+				 * aligned and sized accordingly.
+				 */
+				chan->xfer_len = num_packets * chan->max_packet;
+			}
+		} else {
+			/* Need 1 packet for transfer length of 0 */
+			num_packets = 1;
+		}
+
+		if (chan->ep_type == USB_ENDPOINT_XFER_INT ||
+		    chan->ep_type == USB_ENDPOINT_XFER_ISOC)
+			/*
+			 * Make sure that the multi_count field matches the
+			 * actual transfer length
+			 */
+			chan->multi_count = num_packets;
+
+		if (chan->ep_type == USB_ENDPOINT_XFER_ISOC)
+			dwc2_set_pid_isoc(chan);
+
+		hctsiz |= chan->xfer_len << TSIZ_XFERSIZE_SHIFT &
+			  TSIZ_XFERSIZE_MASK;
+
+		/* The ec_mc gets the multi_count for non-split */
+		ec_mc = chan->multi_count;
+	}
+
+	chan->start_pkt_count = num_packets;
+	hctsiz |= num_packets << TSIZ_PKTCNT_SHIFT & TSIZ_PKTCNT_MASK;
+	hctsiz |= chan->data_pid_start << TSIZ_SC_MC_PID_SHIFT &
+		  TSIZ_SC_MC_PID_MASK;
+	dwc2_writel(hsotg, hctsiz, HCTSIZ(chan->hc_num));
+	if (dbg_hc(chan)) {
+		dev_vdbg(hsotg->dev, "Wrote %08x to HCTSIZ(%d)\n",
+			 hctsiz, chan->hc_num);
+
+		dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__,
+			 chan->hc_num);
+		dev_vdbg(hsotg->dev, "	 Xfer Size: %d\n",
+			 (hctsiz & TSIZ_XFERSIZE_MASK) >>
+			 TSIZ_XFERSIZE_SHIFT);
+		dev_vdbg(hsotg->dev, "	 Num Pkts: %d\n",
+			 (hctsiz & TSIZ_PKTCNT_MASK) >>
+			 TSIZ_PKTCNT_SHIFT);
+		dev_vdbg(hsotg->dev, "	 Start PID: %d\n",
+			 (hctsiz & TSIZ_SC_MC_PID_MASK) >>
+			 TSIZ_SC_MC_PID_SHIFT);
+	}
+
+	if (hsotg->params.host_dma) {
+		dma_addr_t dma_addr;
+
+		if (chan->align_buf) {
+			if (dbg_hc(chan))
+				dev_vdbg(hsotg->dev, "align_buf\n");
+			dma_addr = chan->align_buf;
+		} else {
+			dma_addr = chan->xfer_dma;
+		}
+		dwc2_writel(hsotg, (u32)dma_addr, HCDMA(chan->hc_num));
+
+		if (dbg_hc(chan))
+			dev_vdbg(hsotg->dev, "Wrote %08lx to HCDMA(%d)\n",
+				 (unsigned long)dma_addr, chan->hc_num);
+	}
+
+	/* Start the split */
+	if (chan->do_split) {
+		u32 hcsplt = dwc2_readl(hsotg, HCSPLT(chan->hc_num));
+
+		hcsplt |= HCSPLT_SPLTENA;
+		dwc2_writel(hsotg, hcsplt, HCSPLT(chan->hc_num));
+	}
+
+	hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num));
+	hcchar &= ~HCCHAR_MULTICNT_MASK;
+	hcchar |= (ec_mc << HCCHAR_MULTICNT_SHIFT) & HCCHAR_MULTICNT_MASK;
+	dwc2_hc_set_even_odd_frame(hsotg, chan, &hcchar);
+
+	if (hcchar & HCCHAR_CHDIS)
+		dev_warn(hsotg->dev,
+			 "%s: chdis set, channel %d, hcchar 0x%08x\n",
+			 __func__, chan->hc_num, hcchar);
+
+	/* Set host channel enable after all other setup is complete */
+	hcchar |= HCCHAR_CHENA;
+	hcchar &= ~HCCHAR_CHDIS;
+
+	if (dbg_hc(chan))
+		dev_vdbg(hsotg->dev, "	 Multi Cnt: %d\n",
+			 (hcchar & HCCHAR_MULTICNT_MASK) >>
+			 HCCHAR_MULTICNT_SHIFT);
+
+	dwc2_writel(hsotg, hcchar, HCCHAR(chan->hc_num));
+	if (dbg_hc(chan))
+		dev_vdbg(hsotg->dev, "Wrote %08x to HCCHAR(%d)\n", hcchar,
+			 chan->hc_num);
+
+	chan->xfer_started = 1;
+	chan->requests++;
+
+	if (!hsotg->params.host_dma &&
+	    !chan->ep_is_in && chan->xfer_len > 0)
+		/* Load OUT packet into the appropriate Tx FIFO */
+		dwc2_hc_write_packet(hsotg, chan);
+}
+
+/**
+ * dwc2_hc_start_transfer_ddma() - Does the setup for a data transfer for a
+ * host channel and starts the transfer in Descriptor DMA mode
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ * @chan:  Information needed to initialize the host channel
+ *
+ * Initializes HCTSIZ register. For a PING transfer the Do Ping bit is set.
+ * Sets PID and NTD values. For periodic transfers initializes SCHED_INFO field
+ * with micro-frame bitmap.
+ *
+ * Initializes HCDMA register with descriptor list address and CTD value then
+ * starts the transfer via enabling the channel.
+ */
+void dwc2_hc_start_transfer_ddma(struct dwc2_hsotg *hsotg,
+				 struct dwc2_host_chan *chan)
+{
+	u32 hcchar;
+	u32 hctsiz = 0;
+
+	if (chan->do_ping)
+		hctsiz |= TSIZ_DOPNG;
+
+	if (chan->ep_type == USB_ENDPOINT_XFER_ISOC)
+		dwc2_set_pid_isoc(chan);
+
+	/* Packet Count and Xfer Size are not used in Descriptor DMA mode */
+	hctsiz |= chan->data_pid_start << TSIZ_SC_MC_PID_SHIFT &
+		  TSIZ_SC_MC_PID_MASK;
+
+	/* 0 - 1 descriptor, 1 - 2 descriptors, etc */
+	hctsiz |= (chan->ntd - 1) << TSIZ_NTD_SHIFT & TSIZ_NTD_MASK;
+
+	/* Non-zero only for high-speed interrupt endpoints */
+	hctsiz |= chan->schinfo << TSIZ_SCHINFO_SHIFT & TSIZ_SCHINFO_MASK;
+
+	if (dbg_hc(chan)) {
+		dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__,
+			 chan->hc_num);
+		dev_vdbg(hsotg->dev, "	 Start PID: %d\n",
+			 chan->data_pid_start);
+		dev_vdbg(hsotg->dev, "	 NTD: %d\n", chan->ntd - 1);
+	}
+
+	dwc2_writel(hsotg, hctsiz, HCTSIZ(chan->hc_num));
+
+	dma_sync_single_for_device(hsotg->dev, chan->desc_list_addr,
+				   chan->desc_list_sz, DMA_TO_DEVICE);
+
+	dwc2_writel(hsotg, chan->desc_list_addr, HCDMA(chan->hc_num));
+
+	if (dbg_hc(chan))
+		dev_vdbg(hsotg->dev, "Wrote %pad to HCDMA(%d)\n",
+			 &chan->desc_list_addr, chan->hc_num);
+
+	hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num));
+	hcchar &= ~HCCHAR_MULTICNT_MASK;
+	hcchar |= chan->multi_count << HCCHAR_MULTICNT_SHIFT &
+		  HCCHAR_MULTICNT_MASK;
+
+	if (hcchar & HCCHAR_CHDIS)
+		dev_warn(hsotg->dev,
+			 "%s: chdis set, channel %d, hcchar 0x%08x\n",
+			 __func__, chan->hc_num, hcchar);
+
+	/* Set host channel enable after all other setup is complete */
+	hcchar |= HCCHAR_CHENA;
+	hcchar &= ~HCCHAR_CHDIS;
+
+	if (dbg_hc(chan))
+		dev_vdbg(hsotg->dev, "	 Multi Cnt: %d\n",
+			 (hcchar & HCCHAR_MULTICNT_MASK) >>
+			 HCCHAR_MULTICNT_SHIFT);
+
+	dwc2_writel(hsotg, hcchar, HCCHAR(chan->hc_num));
+	if (dbg_hc(chan))
+		dev_vdbg(hsotg->dev, "Wrote %08x to HCCHAR(%d)\n", hcchar,
+			 chan->hc_num);
+
+	chan->xfer_started = 1;
+	chan->requests++;
+}
+
+/**
+ * dwc2_hc_continue_transfer() - Continues a data transfer that was started by
+ * a previous call to dwc2_hc_start_transfer()
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ * @chan:  Information needed to initialize the host channel
+ *
+ * The caller must ensure there is sufficient space in the request queue and Tx
+ * Data FIFO. This function should only be called in Slave mode. In DMA mode,
+ * the controller acts autonomously to complete transfers programmed to a host
+ * channel.
+ *
+ * For an OUT transfer, a new data packet is loaded into the appropriate FIFO
+ * if there is any data remaining to be queued. For an IN transfer, another
+ * data packet is always requested. For the SETUP phase of a control transfer,
+ * this function does nothing.
+ *
+ * Return: 1 if a new request is queued, 0 if no more requests are required
+ * for this transfer
+ */
+static int dwc2_hc_continue_transfer(struct dwc2_hsotg *hsotg,
+				     struct dwc2_host_chan *chan)
+{
+	if (dbg_hc(chan))
+		dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__,
+			 chan->hc_num);
+
+	if (chan->do_split)
+		/* SPLITs always queue just once per channel */
+		return 0;
+
+	if (chan->data_pid_start == DWC2_HC_PID_SETUP)
+		/* SETUPs are queued only once since they can't be NAK'd */
+		return 0;
+
+	if (chan->ep_is_in) {
+		/*
+		 * Always queue another request for other IN transfers. If
+		 * back-to-back INs are issued and NAKs are received for both,
+		 * the driver may still be processing the first NAK when the
+		 * second NAK is received. When the interrupt handler clears
+		 * the NAK interrupt for the first NAK, the second NAK will
+		 * not be seen. So we can't depend on the NAK interrupt
+		 * handler to requeue a NAK'd request. Instead, IN requests
+		 * are issued each time this function is called. When the
+		 * transfer completes, the extra requests for the channel will
+		 * be flushed.
+		 */
+		u32 hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num));
+
+		dwc2_hc_set_even_odd_frame(hsotg, chan, &hcchar);
+		hcchar |= HCCHAR_CHENA;
+		hcchar &= ~HCCHAR_CHDIS;
+		if (dbg_hc(chan))
+			dev_vdbg(hsotg->dev, "	 IN xfer: hcchar = 0x%08x\n",
+				 hcchar);
+		dwc2_writel(hsotg, hcchar, HCCHAR(chan->hc_num));
+		chan->requests++;
+		return 1;
+	}
+
+	/* OUT transfers */
+
+	if (chan->xfer_count < chan->xfer_len) {
+		if (chan->ep_type == USB_ENDPOINT_XFER_INT ||
+		    chan->ep_type == USB_ENDPOINT_XFER_ISOC) {
+			u32 hcchar = dwc2_readl(hsotg,
+						HCCHAR(chan->hc_num));
+
+			dwc2_hc_set_even_odd_frame(hsotg, chan,
+						   &hcchar);
+		}
+
+		/* Load OUT packet into the appropriate Tx FIFO */
+		dwc2_hc_write_packet(hsotg, chan);
+		chan->requests++;
+		return 1;
+	}
+
+	return 0;
+}
+
+/*
+ * =========================================================================
+ *  HCD
+ * =========================================================================
+ */
+
+/*
+ * Processes all the URBs in a single list of QHs. Completes them with
+ * -ETIMEDOUT and frees the QTD.
+ *
+ * Must be called with interrupt disabled and spinlock held
+ */
+static void dwc2_kill_urbs_in_qh_list(struct dwc2_hsotg *hsotg,
+				      struct list_head *qh_list)
+{
+	struct dwc2_qh *qh, *qh_tmp;
+	struct dwc2_qtd *qtd, *qtd_tmp;
+
+	list_for_each_entry_safe(qh, qh_tmp, qh_list, qh_list_entry) {
+		list_for_each_entry_safe(qtd, qtd_tmp, &qh->qtd_list,
+					 qtd_list_entry) {
+			dwc2_host_complete(hsotg, qtd, -ECONNRESET);
+			dwc2_hcd_qtd_unlink_and_free(hsotg, qtd, qh);
+		}
+	}
+}
+
+static void dwc2_qh_list_free(struct dwc2_hsotg *hsotg,
+			      struct list_head *qh_list)
+{
+	struct dwc2_qtd *qtd, *qtd_tmp;
+	struct dwc2_qh *qh, *qh_tmp;
+	unsigned long flags;
+
+	if (!qh_list->next)
+		/* The list hasn't been initialized yet */
+		return;
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+
+	/* Ensure there are no QTDs or URBs left */
+	dwc2_kill_urbs_in_qh_list(hsotg, qh_list);
+
+	list_for_each_entry_safe(qh, qh_tmp, qh_list, qh_list_entry) {
+		dwc2_hcd_qh_unlink(hsotg, qh);
+
+		/* Free each QTD in the QH's QTD list */
+		list_for_each_entry_safe(qtd, qtd_tmp, &qh->qtd_list,
+					 qtd_list_entry)
+			dwc2_hcd_qtd_unlink_and_free(hsotg, qtd, qh);
+
+		if (qh->channel && qh->channel->qh == qh)
+			qh->channel->qh = NULL;
+
+		spin_unlock_irqrestore(&hsotg->lock, flags);
+		dwc2_hcd_qh_free(hsotg, qh);
+		spin_lock_irqsave(&hsotg->lock, flags);
+	}
+
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+}
+
+/*
+ * Responds with an error status of -ETIMEDOUT to all URBs in the non-periodic
+ * and periodic schedules. The QTD associated with each URB is removed from
+ * the schedule and freed. This function may be called when a disconnect is
+ * detected or when the HCD is being stopped.
+ *
+ * Must be called with interrupt disabled and spinlock held
+ */
+static void dwc2_kill_all_urbs(struct dwc2_hsotg *hsotg)
+{
+	dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->non_periodic_sched_inactive);
+	dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->non_periodic_sched_waiting);
+	dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->non_periodic_sched_active);
+	dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->periodic_sched_inactive);
+	dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->periodic_sched_ready);
+	dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->periodic_sched_assigned);
+	dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->periodic_sched_queued);
+}
+
+/**
+ * dwc2_hcd_start() - Starts the HCD when switching to Host mode
+ *
+ * @hsotg: Pointer to struct dwc2_hsotg
+ */
+void dwc2_hcd_start(struct dwc2_hsotg *hsotg)
+{
+	u32 hprt0;
+
+	if (hsotg->op_state == OTG_STATE_B_HOST) {
+		/*
+		 * Reset the port. During a HNP mode switch the reset
+		 * needs to occur within 1ms and have a duration of at
+		 * least 50ms.
+		 */
+		hprt0 = dwc2_read_hprt0(hsotg);
+		hprt0 |= HPRT0_RST;
+		dwc2_writel(hsotg, hprt0, HPRT0);
+	}
+
+	queue_delayed_work(hsotg->wq_otg, &hsotg->start_work,
+			   msecs_to_jiffies(50));
+}
+
+/* Must be called with interrupt disabled and spinlock held */
+static void dwc2_hcd_cleanup_channels(struct dwc2_hsotg *hsotg)
+{
+	int num_channels = hsotg->params.host_channels;
+	struct dwc2_host_chan *channel;
+	u32 hcchar;
+	int i;
+
+	if (!hsotg->params.host_dma) {
+		/* Flush out any channel requests in slave mode */
+		for (i = 0; i < num_channels; i++) {
+			channel = hsotg->hc_ptr_array[i];
+			if (!list_empty(&channel->hc_list_entry))
+				continue;
+			hcchar = dwc2_readl(hsotg, HCCHAR(i));
+			if (hcchar & HCCHAR_CHENA) {
+				hcchar &= ~(HCCHAR_CHENA | HCCHAR_EPDIR);
+				hcchar |= HCCHAR_CHDIS;
+				dwc2_writel(hsotg, hcchar, HCCHAR(i));
+			}
+		}
+	}
+
+	for (i = 0; i < num_channels; i++) {
+		channel = hsotg->hc_ptr_array[i];
+		if (!list_empty(&channel->hc_list_entry))
+			continue;
+		hcchar = dwc2_readl(hsotg, HCCHAR(i));
+		if (hcchar & HCCHAR_CHENA) {
+			/* Halt the channel */
+			hcchar |= HCCHAR_CHDIS;
+			dwc2_writel(hsotg, hcchar, HCCHAR(i));
+		}
+
+		dwc2_hc_cleanup(hsotg, channel);
+		list_add_tail(&channel->hc_list_entry, &hsotg->free_hc_list);
+		/*
+		 * Added for Descriptor DMA to prevent channel double cleanup in
+		 * release_channel_ddma(), which is called from ep_disable when
+		 * device disconnects
+		 */
+		channel->qh = NULL;
+	}
+	/* All channels have been freed, mark them available */
+	if (hsotg->params.uframe_sched) {
+		hsotg->available_host_channels =
+			hsotg->params.host_channels;
+	} else {
+		hsotg->non_periodic_channels = 0;
+		hsotg->periodic_channels = 0;
+	}
+}
+
+/**
+ * dwc2_hcd_connect() - Handles connect of the HCD
+ *
+ * @hsotg: Pointer to struct dwc2_hsotg
+ *
+ * Must be called with interrupt disabled and spinlock held
+ */
+void dwc2_hcd_connect(struct dwc2_hsotg *hsotg)
+{
+	if (hsotg->lx_state != DWC2_L0)
+		usb_hcd_resume_root_hub(hsotg->priv);
+
+	hsotg->flags.b.port_connect_status_change = 1;
+	hsotg->flags.b.port_connect_status = 1;
+}
+
+/**
+ * dwc2_hcd_disconnect() - Handles disconnect of the HCD
+ *
+ * @hsotg: Pointer to struct dwc2_hsotg
+ * @force: If true, we won't try to reconnect even if we see device connected.
+ *
+ * Must be called with interrupt disabled and spinlock held
+ */
+void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg, bool force)
+{
+	u32 intr;
+	u32 hprt0;
+
+	/* Set status flags for the hub driver */
+	hsotg->flags.b.port_connect_status_change = 1;
+	hsotg->flags.b.port_connect_status = 0;
+
+	/*
+	 * Shutdown any transfers in process by clearing the Tx FIFO Empty
+	 * interrupt mask and status bits and disabling subsequent host
+	 * channel interrupts.
+	 */
+	intr = dwc2_readl(hsotg, GINTMSK);
+	intr &= ~(GINTSTS_NPTXFEMP | GINTSTS_PTXFEMP | GINTSTS_HCHINT);
+	dwc2_writel(hsotg, intr, GINTMSK);
+	intr = GINTSTS_NPTXFEMP | GINTSTS_PTXFEMP | GINTSTS_HCHINT;
+	dwc2_writel(hsotg, intr, GINTSTS);
+
+	/*
+	 * Turn off the vbus power only if the core has transitioned to device
+	 * mode. If still in host mode, need to keep power on to detect a
+	 * reconnection.
+	 */
+	if (dwc2_is_device_mode(hsotg)) {
+		if (hsotg->op_state != OTG_STATE_A_SUSPEND) {
+			dev_dbg(hsotg->dev, "Disconnect: PortPower off\n");
+			dwc2_writel(hsotg, 0, HPRT0);
+		}
+
+		dwc2_disable_host_interrupts(hsotg);
+	}
+
+	/* Respond with an error status to all URBs in the schedule */
+	dwc2_kill_all_urbs(hsotg);
+
+	if (dwc2_is_host_mode(hsotg))
+		/* Clean up any host channels that were in use */
+		dwc2_hcd_cleanup_channels(hsotg);
+
+	dwc2_host_disconnect(hsotg);
+
+	/*
+	 * Add an extra check here to see if we're actually connected but
+	 * we don't have a detection interrupt pending.  This can happen if:
+	 *   1. hardware sees connect
+	 *   2. hardware sees disconnect
+	 *   3. hardware sees connect
+	 *   4. dwc2_port_intr() - clears connect interrupt
+	 *   5. dwc2_handle_common_intr() - calls here
+	 *
+	 * Without the extra check here we will end calling disconnect
+	 * and won't get any future interrupts to handle the connect.
+	 */
+	if (!force) {
+		hprt0 = dwc2_readl(hsotg, HPRT0);
+		if (!(hprt0 & HPRT0_CONNDET) && (hprt0 & HPRT0_CONNSTS))
+			dwc2_hcd_connect(hsotg);
+	}
+}
+
+/**
+ * dwc2_hcd_rem_wakeup() - Handles Remote Wakeup
+ *
+ * @hsotg: Pointer to struct dwc2_hsotg
+ */
+static void dwc2_hcd_rem_wakeup(struct dwc2_hsotg *hsotg)
+{
+	if (hsotg->bus_suspended) {
+		hsotg->flags.b.port_suspend_change = 1;
+		usb_hcd_resume_root_hub(hsotg->priv);
+	}
+
+	if (hsotg->lx_state == DWC2_L1)
+		hsotg->flags.b.port_l1_change = 1;
+}
+
+/**
+ * dwc2_hcd_stop() - Halts the DWC_otg host mode operations in a clean manner
+ *
+ * @hsotg: Pointer to struct dwc2_hsotg
+ *
+ * Must be called with interrupt disabled and spinlock held
+ */
+void dwc2_hcd_stop(struct dwc2_hsotg *hsotg)
+{
+	dev_dbg(hsotg->dev, "DWC OTG HCD STOP\n");
+
+	/*
+	 * The root hub should be disconnected before this function is called.
+	 * The disconnect will clear the QTD lists (via ..._hcd_urb_dequeue)
+	 * and the QH lists (via ..._hcd_endpoint_disable).
+	 */
+
+	/* Turn off all host-specific interrupts */
+	dwc2_disable_host_interrupts(hsotg);
+
+	/* Turn off the vbus power */
+	dev_dbg(hsotg->dev, "PortPower off\n");
+	dwc2_writel(hsotg, 0, HPRT0);
+}
+
+/* Caller must hold driver lock */
+static int dwc2_hcd_urb_enqueue(struct dwc2_hsotg *hsotg,
+				struct dwc2_hcd_urb *urb, struct dwc2_qh *qh,
+				struct dwc2_qtd *qtd)
+{
+	u32 intr_mask;
+	int retval;
+	int dev_speed;
+
+	if (!hsotg->flags.b.port_connect_status) {
+		/* No longer connected */
+		dev_err(hsotg->dev, "Not connected\n");
+		return -ENODEV;
+	}
+
+	dev_speed = dwc2_host_get_speed(hsotg, urb->priv);
+
+	/* Some configurations cannot support LS traffic on a FS root port */
+	if ((dev_speed == USB_SPEED_LOW) &&
+	    (hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED) &&
+	    (hsotg->hw_params.hs_phy_type == GHWCFG2_HS_PHY_TYPE_UTMI)) {
+		u32 hprt0 = dwc2_readl(hsotg, HPRT0);
+		u32 prtspd = (hprt0 & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT;
+
+		if (prtspd == HPRT0_SPD_FULL_SPEED)
+			return -ENODEV;
+	}
+
+	if (!qtd)
+		return -EINVAL;
+
+	dwc2_hcd_qtd_init(qtd, urb);
+	retval = dwc2_hcd_qtd_add(hsotg, qtd, qh);
+	if (retval) {
+		dev_err(hsotg->dev,
+			"DWC OTG HCD URB Enqueue failed adding QTD. Error status %d\n",
+			retval);
+		return retval;
+	}
+
+	intr_mask = dwc2_readl(hsotg, GINTMSK);
+	if (!(intr_mask & GINTSTS_SOF)) {
+		enum dwc2_transaction_type tr_type;
+
+		if (qtd->qh->ep_type == USB_ENDPOINT_XFER_BULK &&
+		    !(qtd->urb->flags & URB_GIVEBACK_ASAP))
+			/*
+			 * Do not schedule SG transactions until qtd has
+			 * URB_GIVEBACK_ASAP set
+			 */
+			return 0;
+
+		tr_type = dwc2_hcd_select_transactions(hsotg);
+		if (tr_type != DWC2_TRANSACTION_NONE)
+			dwc2_hcd_queue_transactions(hsotg, tr_type);
+	}
+
+	return 0;
+}
+
+/* Must be called with interrupt disabled and spinlock held */
+static int dwc2_hcd_urb_dequeue(struct dwc2_hsotg *hsotg,
+				struct dwc2_hcd_urb *urb)
+{
+	struct dwc2_qh *qh;
+	struct dwc2_qtd *urb_qtd;
+
+	urb_qtd = urb->qtd;
+	if (!urb_qtd) {
+		dev_dbg(hsotg->dev, "## Urb QTD is NULL ##\n");
+		return -EINVAL;
+	}
+
+	qh = urb_qtd->qh;
+	if (!qh) {
+		dev_dbg(hsotg->dev, "## Urb QTD QH is NULL ##\n");
+		return -EINVAL;
+	}
+
+	urb->priv = NULL;
+
+	if (urb_qtd->in_process && qh->channel) {
+		dwc2_dump_channel_info(hsotg, qh->channel);
+
+		/* The QTD is in process (it has been assigned to a channel) */
+		if (hsotg->flags.b.port_connect_status)
+			/*
+			 * If still connected (i.e. in host mode), halt the
+			 * channel so it can be used for other transfers. If
+			 * no longer connected, the host registers can't be
+			 * written to halt the channel since the core is in
+			 * device mode.
+			 */
+			dwc2_hc_halt(hsotg, qh->channel,
+				     DWC2_HC_XFER_URB_DEQUEUE);
+	}
+
+	/*
+	 * Free the QTD and clean up the associated QH. Leave the QH in the
+	 * schedule if it has any remaining QTDs.
+	 */
+	if (!hsotg->params.dma_desc_enable) {
+		u8 in_process = urb_qtd->in_process;
+
+		dwc2_hcd_qtd_unlink_and_free(hsotg, urb_qtd, qh);
+		if (in_process) {
+			dwc2_hcd_qh_deactivate(hsotg, qh, 0);
+			qh->channel = NULL;
+		} else if (list_empty(&qh->qtd_list)) {
+			dwc2_hcd_qh_unlink(hsotg, qh);
+		}
+	} else {
+		dwc2_hcd_qtd_unlink_and_free(hsotg, urb_qtd, qh);
+	}
+
+	return 0;
+}
+
+/* Must NOT be called with interrupt disabled or spinlock held */
+static int dwc2_hcd_endpoint_disable(struct dwc2_hsotg *hsotg,
+				     struct usb_host_endpoint *ep, int retry)
+{
+	struct dwc2_qtd *qtd, *qtd_tmp;
+	struct dwc2_qh *qh;
+	unsigned long flags;
+	int rc;
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+
+	qh = ep->hcpriv;
+	if (!qh) {
+		rc = -EINVAL;
+		goto err;
+	}
+
+	while (!list_empty(&qh->qtd_list) && retry--) {
+		if (retry == 0) {
+			dev_err(hsotg->dev,
+				"## timeout in dwc2_hcd_endpoint_disable() ##\n");
+			rc = -EBUSY;
+			goto err;
+		}
+
+		spin_unlock_irqrestore(&hsotg->lock, flags);
+		msleep(20);
+		spin_lock_irqsave(&hsotg->lock, flags);
+		qh = ep->hcpriv;
+		if (!qh) {
+			rc = -EINVAL;
+			goto err;
+		}
+	}
+
+	dwc2_hcd_qh_unlink(hsotg, qh);
+
+	/* Free each QTD in the QH's QTD list */
+	list_for_each_entry_safe(qtd, qtd_tmp, &qh->qtd_list, qtd_list_entry)
+		dwc2_hcd_qtd_unlink_and_free(hsotg, qtd, qh);
+
+	ep->hcpriv = NULL;
+
+	if (qh->channel && qh->channel->qh == qh)
+		qh->channel->qh = NULL;
+
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+
+	dwc2_hcd_qh_free(hsotg, qh);
+
+	return 0;
+
+err:
+	ep->hcpriv = NULL;
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+
+	return rc;
+}
+
+/* Must be called with interrupt disabled and spinlock held */
+static int dwc2_hcd_endpoint_reset(struct dwc2_hsotg *hsotg,
+				   struct usb_host_endpoint *ep)
+{
+	struct dwc2_qh *qh = ep->hcpriv;
+
+	if (!qh)
+		return -EINVAL;
+
+	qh->data_toggle = DWC2_HC_PID_DATA0;
+
+	return 0;
+}
+
+/**
+ * dwc2_core_init() - Initializes the DWC_otg controller registers and
+ * prepares the core for device mode or host mode operation
+ *
+ * @hsotg:         Programming view of the DWC_otg controller
+ * @initial_setup: If true then this is the first init for this instance.
+ */
+int dwc2_core_init(struct dwc2_hsotg *hsotg, bool initial_setup)
+{
+	u32 usbcfg, otgctl;
+	int retval;
+
+	dev_dbg(hsotg->dev, "%s(%p)\n", __func__, hsotg);
+
+	usbcfg = dwc2_readl(hsotg, GUSBCFG);
+
+	/* Set ULPI External VBUS bit if needed */
+	usbcfg &= ~GUSBCFG_ULPI_EXT_VBUS_DRV;
+	if (hsotg->params.phy_ulpi_ext_vbus)
+		usbcfg |= GUSBCFG_ULPI_EXT_VBUS_DRV;
+
+	/* Set external TS Dline pulsing bit if needed */
+	usbcfg &= ~GUSBCFG_TERMSELDLPULSE;
+	if (hsotg->params.ts_dline)
+		usbcfg |= GUSBCFG_TERMSELDLPULSE;
+
+	dwc2_writel(hsotg, usbcfg, GUSBCFG);
+
+	/*
+	 * Reset the Controller
+	 *
+	 * We only need to reset the controller if this is a re-init.
+	 * For the first init we know for sure that earlier code reset us (it
+	 * needed to in order to properly detect various parameters).
+	 */
+	if (!initial_setup) {
+		retval = dwc2_core_reset(hsotg, false);
+		if (retval) {
+			dev_err(hsotg->dev, "%s(): Reset failed, aborting\n",
+				__func__);
+			return retval;
+		}
+	}
+
+	/*
+	 * This needs to happen in FS mode before any other programming occurs
+	 */
+	retval = dwc2_phy_init(hsotg, initial_setup);
+	if (retval)
+		return retval;
+
+	/* Program the GAHBCFG Register */
+	retval = dwc2_gahbcfg_init(hsotg);
+	if (retval)
+		return retval;
+
+	/* Program the GUSBCFG register */
+	dwc2_gusbcfg_init(hsotg);
+
+	/* Program the GOTGCTL register */
+	otgctl = dwc2_readl(hsotg, GOTGCTL);
+	otgctl &= ~GOTGCTL_OTGVER;
+	dwc2_writel(hsotg, otgctl, GOTGCTL);
+
+	/* Clear the SRP success bit for FS-I2c */
+	hsotg->srp_success = 0;
+
+	/* Enable common interrupts */
+	dwc2_enable_common_interrupts(hsotg);
+
+	/*
+	 * Do device or host initialization based on mode during PCD and
+	 * HCD initialization
+	 */
+	if (dwc2_is_host_mode(hsotg)) {
+		dev_dbg(hsotg->dev, "Host Mode\n");
+		hsotg->op_state = OTG_STATE_A_HOST;
+	} else {
+		dev_dbg(hsotg->dev, "Device Mode\n");
+		hsotg->op_state = OTG_STATE_B_PERIPHERAL;
+	}
+
+	return 0;
+}
+
+/**
+ * dwc2_core_host_init() - Initializes the DWC_otg controller registers for
+ * Host mode
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ *
+ * This function flushes the Tx and Rx FIFOs and flushes any entries in the
+ * request queues. Host channels are reset to ensure that they are ready for
+ * performing transfers.
+ */
+static void dwc2_core_host_init(struct dwc2_hsotg *hsotg)
+{
+	u32 hcfg, hfir, otgctl, usbcfg;
+
+	dev_dbg(hsotg->dev, "%s(%p)\n", __func__, hsotg);
+
+	/* Set HS/FS Timeout Calibration to 7 (max available value).
+	 * The number of PHY clocks that the application programs in
+	 * this field is added to the high/full speed interpacket timeout
+	 * duration in the core to account for any additional delays
+	 * introduced by the PHY. This can be required, because the delay
+	 * introduced by the PHY in generating the linestate condition
+	 * can vary from one PHY to another.
+	 */
+	usbcfg = dwc2_readl(hsotg, GUSBCFG);
+	usbcfg |= GUSBCFG_TOUTCAL(7);
+	dwc2_writel(hsotg, usbcfg, GUSBCFG);
+
+	/* Restart the Phy Clock */
+	dwc2_writel(hsotg, 0, PCGCTL);
+
+	/* Initialize Host Configuration Register */
+	dwc2_init_fs_ls_pclk_sel(hsotg);
+	if (hsotg->params.speed == DWC2_SPEED_PARAM_FULL ||
+	    hsotg->params.speed == DWC2_SPEED_PARAM_LOW) {
+		hcfg = dwc2_readl(hsotg, HCFG);
+		hcfg |= HCFG_FSLSSUPP;
+		dwc2_writel(hsotg, hcfg, HCFG);
+	}
+
+	/*
+	 * This bit allows dynamic reloading of the HFIR register during
+	 * runtime. This bit needs to be programmed during initial configuration
+	 * and its value must not be changed during runtime.
+	 */
+	if (hsotg->params.reload_ctl) {
+		hfir = dwc2_readl(hsotg, HFIR);
+		hfir |= HFIR_RLDCTRL;
+		dwc2_writel(hsotg, hfir, HFIR);
+	}
+
+	if (hsotg->params.dma_desc_enable) {
+		u32 op_mode = hsotg->hw_params.op_mode;
+
+		if (hsotg->hw_params.snpsid < DWC2_CORE_REV_2_90a ||
+		    !hsotg->hw_params.dma_desc_enable ||
+		    op_mode == GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE ||
+		    op_mode == GHWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE ||
+		    op_mode == GHWCFG2_OP_MODE_UNDEFINED) {
+			dev_err(hsotg->dev,
+				"Hardware does not support descriptor DMA mode -\n");
+			dev_err(hsotg->dev,
+				"falling back to buffer DMA mode.\n");
+			hsotg->params.dma_desc_enable = false;
+		} else {
+			hcfg = dwc2_readl(hsotg, HCFG);
+			hcfg |= HCFG_DESCDMA;
+			dwc2_writel(hsotg, hcfg, HCFG);
+		}
+	}
+
+	/* Configure data FIFO sizes */
+	dwc2_config_fifos(hsotg);
+
+	/* TODO - check this */
+	/* Clear Host Set HNP Enable in the OTG Control Register */
+	otgctl = dwc2_readl(hsotg, GOTGCTL);
+	otgctl &= ~GOTGCTL_HSTSETHNPEN;
+	dwc2_writel(hsotg, otgctl, GOTGCTL);
+
+	/* Make sure the FIFOs are flushed */
+	dwc2_flush_tx_fifo(hsotg, 0x10 /* all TX FIFOs */);
+	dwc2_flush_rx_fifo(hsotg);
+
+	/* Clear Host Set HNP Enable in the OTG Control Register */
+	otgctl = dwc2_readl(hsotg, GOTGCTL);
+	otgctl &= ~GOTGCTL_HSTSETHNPEN;
+	dwc2_writel(hsotg, otgctl, GOTGCTL);
+
+	if (!hsotg->params.dma_desc_enable) {
+		int num_channels, i;
+		u32 hcchar;
+
+		/* Flush out any leftover queued requests */
+		num_channels = hsotg->params.host_channels;
+		for (i = 0; i < num_channels; i++) {
+			hcchar = dwc2_readl(hsotg, HCCHAR(i));
+			if (hcchar & HCCHAR_CHENA) {
+				hcchar &= ~HCCHAR_CHENA;
+				hcchar |= HCCHAR_CHDIS;
+				hcchar &= ~HCCHAR_EPDIR;
+				dwc2_writel(hsotg, hcchar, HCCHAR(i));
+			}
+		}
+
+		/* Halt all channels to put them into a known state */
+		for (i = 0; i < num_channels; i++) {
+			hcchar = dwc2_readl(hsotg, HCCHAR(i));
+			if (hcchar & HCCHAR_CHENA) {
+				hcchar |= HCCHAR_CHENA | HCCHAR_CHDIS;
+				hcchar &= ~HCCHAR_EPDIR;
+				dwc2_writel(hsotg, hcchar, HCCHAR(i));
+				dev_dbg(hsotg->dev, "%s: Halt channel %d\n",
+					__func__, i);
+
+				if (dwc2_hsotg_wait_bit_clear(hsotg, HCCHAR(i),
+							      HCCHAR_CHENA,
+							      1000)) {
+					dev_warn(hsotg->dev,
+						 "Unable to clear enable on channel %d\n",
+						 i);
+				}
+			}
+		}
+	}
+
+	/* Enable ACG feature in host mode, if supported */
+	dwc2_enable_acg(hsotg);
+
+	/* Turn on the vbus power */
+	dev_dbg(hsotg->dev, "Init: Port Power? op_state=%d\n", hsotg->op_state);
+	if (hsotg->op_state == OTG_STATE_A_HOST) {
+		u32 hprt0 = dwc2_read_hprt0(hsotg);
+
+		dev_dbg(hsotg->dev, "Init: Power Port (%d)\n",
+			!!(hprt0 & HPRT0_PWR));
+		if (!(hprt0 & HPRT0_PWR)) {
+			hprt0 |= HPRT0_PWR;
+			dwc2_writel(hsotg, hprt0, HPRT0);
+		}
+	}
+
+	dwc2_enable_host_interrupts(hsotg);
+}
+
+/*
+ * Initializes dynamic portions of the DWC_otg HCD state
+ *
+ * Must be called with interrupt disabled and spinlock held
+ */
+static void dwc2_hcd_reinit(struct dwc2_hsotg *hsotg)
+{
+	struct dwc2_host_chan *chan, *chan_tmp;
+	int num_channels;
+	int i;
+
+	hsotg->flags.d32 = 0;
+	hsotg->non_periodic_qh_ptr = &hsotg->non_periodic_sched_active;
+
+	if (hsotg->params.uframe_sched) {
+		hsotg->available_host_channels =
+			hsotg->params.host_channels;
+	} else {
+		hsotg->non_periodic_channels = 0;
+		hsotg->periodic_channels = 0;
+	}
+
+	/*
+	 * Put all channels in the free channel list and clean up channel
+	 * states
+	 */
+	list_for_each_entry_safe(chan, chan_tmp, &hsotg->free_hc_list,
+				 hc_list_entry)
+		list_del_init(&chan->hc_list_entry);
+
+	num_channels = hsotg->params.host_channels;
+	for (i = 0; i < num_channels; i++) {
+		chan = hsotg->hc_ptr_array[i];
+		list_add_tail(&chan->hc_list_entry, &hsotg->free_hc_list);
+		dwc2_hc_cleanup(hsotg, chan);
+	}
+
+	/* Initialize the DWC core for host mode operation */
+	dwc2_core_host_init(hsotg);
+}
+
+static void dwc2_hc_init_split(struct dwc2_hsotg *hsotg,
+			       struct dwc2_host_chan *chan,
+			       struct dwc2_qtd *qtd, struct dwc2_hcd_urb *urb)
+{
+	int hub_addr, hub_port;
+
+	chan->do_split = 1;
+	chan->xact_pos = qtd->isoc_split_pos;
+	chan->complete_split = qtd->complete_split;
+	dwc2_host_hub_info(hsotg, urb->priv, &hub_addr, &hub_port);
+	chan->hub_addr = (u8)hub_addr;
+	chan->hub_port = (u8)hub_port;
+}
+
+static void dwc2_hc_init_xfer(struct dwc2_hsotg *hsotg,
+			      struct dwc2_host_chan *chan,
+			      struct dwc2_qtd *qtd)
+{
+	struct dwc2_hcd_urb *urb = qtd->urb;
+	struct dwc2_hcd_iso_packet_desc *frame_desc;
+
+	switch (dwc2_hcd_get_pipe_type(&urb->pipe_info)) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		chan->ep_type = USB_ENDPOINT_XFER_CONTROL;
+
+		switch (qtd->control_phase) {
+		case DWC2_CONTROL_SETUP:
+			dev_vdbg(hsotg->dev, "  Control setup transaction\n");
+			chan->do_ping = 0;
+			chan->ep_is_in = 0;
+			chan->data_pid_start = DWC2_HC_PID_SETUP;
+			if (hsotg->params.host_dma)
+				chan->xfer_dma = urb->setup_dma;
+			else
+				chan->xfer_buf = urb->setup_packet;
+			chan->xfer_len = 8;
+			break;
+
+		case DWC2_CONTROL_DATA:
+			dev_vdbg(hsotg->dev, "  Control data transaction\n");
+			chan->data_pid_start = qtd->data_toggle;
+			break;
+
+		case DWC2_CONTROL_STATUS:
+			/*
+			 * Direction is opposite of data direction or IN if no
+			 * data
+			 */
+			dev_vdbg(hsotg->dev, "  Control status transaction\n");
+			if (urb->length == 0)
+				chan->ep_is_in = 1;
+			else
+				chan->ep_is_in =
+					dwc2_hcd_is_pipe_out(&urb->pipe_info);
+			if (chan->ep_is_in)
+				chan->do_ping = 0;
+			chan->data_pid_start = DWC2_HC_PID_DATA1;
+			chan->xfer_len = 0;
+			if (hsotg->params.host_dma)
+				chan->xfer_dma = hsotg->status_buf_dma;
+			else
+				chan->xfer_buf = hsotg->status_buf;
+			break;
+		}
+		break;
+
+	case USB_ENDPOINT_XFER_BULK:
+		chan->ep_type = USB_ENDPOINT_XFER_BULK;
+		break;
+
+	case USB_ENDPOINT_XFER_INT:
+		chan->ep_type = USB_ENDPOINT_XFER_INT;
+		break;
+
+	case USB_ENDPOINT_XFER_ISOC:
+		chan->ep_type = USB_ENDPOINT_XFER_ISOC;
+		if (hsotg->params.dma_desc_enable)
+			break;
+
+		frame_desc = &urb->iso_descs[qtd->isoc_frame_index];
+		frame_desc->status = 0;
+
+		if (hsotg->params.host_dma) {
+			chan->xfer_dma = urb->dma;
+			chan->xfer_dma += frame_desc->offset +
+					qtd->isoc_split_offset;
+		} else {
+			chan->xfer_buf = urb->buf;
+			chan->xfer_buf += frame_desc->offset +
+					qtd->isoc_split_offset;
+		}
+
+		chan->xfer_len = frame_desc->length - qtd->isoc_split_offset;
+
+		if (chan->xact_pos == DWC2_HCSPLT_XACTPOS_ALL) {
+			if (chan->xfer_len <= 188)
+				chan->xact_pos = DWC2_HCSPLT_XACTPOS_ALL;
+			else
+				chan->xact_pos = DWC2_HCSPLT_XACTPOS_BEGIN;
+		}
+		break;
+	}
+}
+
+static int dwc2_alloc_split_dma_aligned_buf(struct dwc2_hsotg *hsotg,
+					    struct dwc2_qh *qh,
+					    struct dwc2_host_chan *chan)
+{
+	if (!hsotg->unaligned_cache ||
+	    chan->max_packet > DWC2_KMEM_UNALIGNED_BUF_SIZE)
+		return -ENOMEM;
+
+	if (!qh->dw_align_buf) {
+		qh->dw_align_buf = kmem_cache_alloc(hsotg->unaligned_cache,
+						    GFP_ATOMIC | GFP_DMA);
+		if (!qh->dw_align_buf)
+			return -ENOMEM;
+	}
+
+	qh->dw_align_buf_dma = dma_map_single(hsotg->dev, qh->dw_align_buf,
+					      DWC2_KMEM_UNALIGNED_BUF_SIZE,
+					      DMA_FROM_DEVICE);
+
+	if (dma_mapping_error(hsotg->dev, qh->dw_align_buf_dma)) {
+		dev_err(hsotg->dev, "can't map align_buf\n");
+		chan->align_buf = 0;
+		return -EINVAL;
+	}
+
+	chan->align_buf = qh->dw_align_buf_dma;
+	return 0;
+}
+
+#define DWC2_USB_DMA_ALIGN 4
+
+static void dwc2_free_dma_aligned_buffer(struct urb *urb)
+{
+	void *stored_xfer_buffer;
+	size_t length;
+
+	if (!(urb->transfer_flags & URB_ALIGNED_TEMP_BUFFER))
+		return;
+
+	/* Restore urb->transfer_buffer from the end of the allocated area */
+	memcpy(&stored_xfer_buffer,
+	       PTR_ALIGN(urb->transfer_buffer + urb->transfer_buffer_length,
+			 dma_get_cache_alignment()),
+	       sizeof(urb->transfer_buffer));
+
+	if (usb_urb_dir_in(urb)) {
+		if (usb_pipeisoc(urb->pipe))
+			length = urb->transfer_buffer_length;
+		else
+			length = urb->actual_length;
+
+		memcpy(stored_xfer_buffer, urb->transfer_buffer, length);
+	}
+	kfree(urb->transfer_buffer);
+	urb->transfer_buffer = stored_xfer_buffer;
+
+	urb->transfer_flags &= ~URB_ALIGNED_TEMP_BUFFER;
+}
+
+static int dwc2_alloc_dma_aligned_buffer(struct urb *urb, gfp_t mem_flags)
+{
+	void *kmalloc_ptr;
+	size_t kmalloc_size;
+
+	if (urb->num_sgs || urb->sg ||
+	    urb->transfer_buffer_length == 0 ||
+	    !((uintptr_t)urb->transfer_buffer & (DWC2_USB_DMA_ALIGN - 1)))
+		return 0;
+
+	/*
+	 * Allocate a buffer with enough padding for original transfer_buffer
+	 * pointer. This allocation is guaranteed to be aligned properly for
+	 * DMA
+	 */
+	kmalloc_size = urb->transfer_buffer_length +
+		(dma_get_cache_alignment() - 1) +
+		sizeof(urb->transfer_buffer);
+
+	kmalloc_ptr = kmalloc(kmalloc_size, mem_flags);
+	if (!kmalloc_ptr)
+		return -ENOMEM;
+
+	/*
+	 * Position value of original urb->transfer_buffer pointer to the end
+	 * of allocation for later referencing
+	 */
+	memcpy(PTR_ALIGN(kmalloc_ptr + urb->transfer_buffer_length,
+			 dma_get_cache_alignment()),
+	       &urb->transfer_buffer, sizeof(urb->transfer_buffer));
+
+	if (usb_urb_dir_out(urb))
+		memcpy(kmalloc_ptr, urb->transfer_buffer,
+		       urb->transfer_buffer_length);
+	urb->transfer_buffer = kmalloc_ptr;
+
+	urb->transfer_flags |= URB_ALIGNED_TEMP_BUFFER;
+
+	return 0;
+}
+
+static int dwc2_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
+				gfp_t mem_flags)
+{
+	int ret;
+
+	/* We assume setup_dma is always aligned; warn if not */
+	WARN_ON_ONCE(urb->setup_dma &&
+		     (urb->setup_dma & (DWC2_USB_DMA_ALIGN - 1)));
+
+	ret = dwc2_alloc_dma_aligned_buffer(urb, mem_flags);
+	if (ret)
+		return ret;
+
+	ret = usb_hcd_map_urb_for_dma(hcd, urb, mem_flags);
+	if (ret)
+		dwc2_free_dma_aligned_buffer(urb);
+
+	return ret;
+}
+
+static void dwc2_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
+{
+	usb_hcd_unmap_urb_for_dma(hcd, urb);
+	dwc2_free_dma_aligned_buffer(urb);
+}
+
+/**
+ * dwc2_assign_and_init_hc() - Assigns transactions from a QTD to a free host
+ * channel and initializes the host channel to perform the transactions. The
+ * host channel is removed from the free list.
+ *
+ * @hsotg: The HCD state structure
+ * @qh:    Transactions from the first QTD for this QH are selected and assigned
+ *         to a free host channel
+ */
+static int dwc2_assign_and_init_hc(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
+{
+	struct dwc2_host_chan *chan;
+	struct dwc2_hcd_urb *urb;
+	struct dwc2_qtd *qtd;
+
+	if (dbg_qh(qh))
+		dev_vdbg(hsotg->dev, "%s(%p,%p)\n", __func__, hsotg, qh);
+
+	if (list_empty(&qh->qtd_list)) {
+		dev_dbg(hsotg->dev, "No QTDs in QH list\n");
+		return -ENOMEM;
+	}
+
+	if (list_empty(&hsotg->free_hc_list)) {
+		dev_dbg(hsotg->dev, "No free channel to assign\n");
+		return -ENOMEM;
+	}
+
+	chan = list_first_entry(&hsotg->free_hc_list, struct dwc2_host_chan,
+				hc_list_entry);
+
+	/* Remove host channel from free list */
+	list_del_init(&chan->hc_list_entry);
+
+	qtd = list_first_entry(&qh->qtd_list, struct dwc2_qtd, qtd_list_entry);
+	urb = qtd->urb;
+	qh->channel = chan;
+	qtd->in_process = 1;
+
+	/*
+	 * Use usb_pipedevice to determine device address. This address is
+	 * 0 before the SET_ADDRESS command and the correct address afterward.
+	 */
+	chan->dev_addr = dwc2_hcd_get_dev_addr(&urb->pipe_info);
+	chan->ep_num = dwc2_hcd_get_ep_num(&urb->pipe_info);
+	chan->speed = qh->dev_speed;
+	chan->max_packet = qh->maxp;
+
+	chan->xfer_started = 0;
+	chan->halt_status = DWC2_HC_XFER_NO_HALT_STATUS;
+	chan->error_state = (qtd->error_count > 0);
+	chan->halt_on_queue = 0;
+	chan->halt_pending = 0;
+	chan->requests = 0;
+
+	/*
+	 * The following values may be modified in the transfer type section
+	 * below. The xfer_len value may be reduced when the transfer is
+	 * started to accommodate the max widths of the XferSize and PktCnt
+	 * fields in the HCTSIZn register.
+	 */
+
+	chan->ep_is_in = (dwc2_hcd_is_pipe_in(&urb->pipe_info) != 0);
+	if (chan->ep_is_in)
+		chan->do_ping = 0;
+	else
+		chan->do_ping = qh->ping_state;
+
+	chan->data_pid_start = qh->data_toggle;
+	chan->multi_count = 1;
+
+	if (urb->actual_length > urb->length &&
+	    !dwc2_hcd_is_pipe_in(&urb->pipe_info))
+		urb->actual_length = urb->length;
+
+	if (hsotg->params.host_dma)
+		chan->xfer_dma = urb->dma + urb->actual_length;
+	else
+		chan->xfer_buf = (u8 *)urb->buf + urb->actual_length;
+
+	chan->xfer_len = urb->length - urb->actual_length;
+	chan->xfer_count = 0;
+
+	/* Set the split attributes if required */
+	if (qh->do_split)
+		dwc2_hc_init_split(hsotg, chan, qtd, urb);
+	else
+		chan->do_split = 0;
+
+	/* Set the transfer attributes */
+	dwc2_hc_init_xfer(hsotg, chan, qtd);
+
+	/* For non-dword aligned buffers */
+	if (hsotg->params.host_dma && qh->do_split &&
+	    chan->ep_is_in && (chan->xfer_dma & 0x3)) {
+		dev_vdbg(hsotg->dev, "Non-aligned buffer\n");
+		if (dwc2_alloc_split_dma_aligned_buf(hsotg, qh, chan)) {
+			dev_err(hsotg->dev,
+				"Failed to allocate memory to handle non-aligned buffer\n");
+			/* Add channel back to free list */
+			chan->align_buf = 0;
+			chan->multi_count = 0;
+			list_add_tail(&chan->hc_list_entry,
+				      &hsotg->free_hc_list);
+			qtd->in_process = 0;
+			qh->channel = NULL;
+			return -ENOMEM;
+		}
+	} else {
+		/*
+		 * We assume that DMA is always aligned in non-split
+		 * case or split out case. Warn if not.
+		 */
+		WARN_ON_ONCE(hsotg->params.host_dma &&
+			     (chan->xfer_dma & 0x3));
+		chan->align_buf = 0;
+	}
+
+	if (chan->ep_type == USB_ENDPOINT_XFER_INT ||
+	    chan->ep_type == USB_ENDPOINT_XFER_ISOC)
+		/*
+		 * This value may be modified when the transfer is started
+		 * to reflect the actual transfer length
+		 */
+		chan->multi_count = qh->maxp_mult;
+
+	if (hsotg->params.dma_desc_enable) {
+		chan->desc_list_addr = qh->desc_list_dma;
+		chan->desc_list_sz = qh->desc_list_sz;
+	}
+
+	dwc2_hc_init(hsotg, chan);
+	chan->qh = qh;
+
+	return 0;
+}
+
+/**
+ * dwc2_hcd_select_transactions() - Selects transactions from the HCD transfer
+ * schedule and assigns them to available host channels. Called from the HCD
+ * interrupt handler functions.
+ *
+ * @hsotg: The HCD state structure
+ *
+ * Return: The types of new transactions that were assigned to host channels
+ */
+enum dwc2_transaction_type dwc2_hcd_select_transactions(
+		struct dwc2_hsotg *hsotg)
+{
+	enum dwc2_transaction_type ret_val = DWC2_TRANSACTION_NONE;
+	struct list_head *qh_ptr;
+	struct dwc2_qh *qh;
+	int num_channels;
+
+#ifdef DWC2_DEBUG_SOF
+	dev_vdbg(hsotg->dev, "  Select Transactions\n");
+#endif
+
+	/* Process entries in the periodic ready list */
+	qh_ptr = hsotg->periodic_sched_ready.next;
+	while (qh_ptr != &hsotg->periodic_sched_ready) {
+		if (list_empty(&hsotg->free_hc_list))
+			break;
+		if (hsotg->params.uframe_sched) {
+			if (hsotg->available_host_channels <= 1)
+				break;
+			hsotg->available_host_channels--;
+		}
+		qh = list_entry(qh_ptr, struct dwc2_qh, qh_list_entry);
+		if (dwc2_assign_and_init_hc(hsotg, qh))
+			break;
+
+		/*
+		 * Move the QH from the periodic ready schedule to the
+		 * periodic assigned schedule
+		 */
+		qh_ptr = qh_ptr->next;
+		list_move_tail(&qh->qh_list_entry,
+			       &hsotg->periodic_sched_assigned);
+		ret_val = DWC2_TRANSACTION_PERIODIC;
+	}
+
+	/*
+	 * Process entries in the inactive portion of the non-periodic
+	 * schedule. Some free host channels may not be used if they are
+	 * reserved for periodic transfers.
+	 */
+	num_channels = hsotg->params.host_channels;
+	qh_ptr = hsotg->non_periodic_sched_inactive.next;
+	while (qh_ptr != &hsotg->non_periodic_sched_inactive) {
+		if (!hsotg->params.uframe_sched &&
+		    hsotg->non_periodic_channels >= num_channels -
+						hsotg->periodic_channels)
+			break;
+		if (list_empty(&hsotg->free_hc_list))
+			break;
+		qh = list_entry(qh_ptr, struct dwc2_qh, qh_list_entry);
+		if (hsotg->params.uframe_sched) {
+			if (hsotg->available_host_channels < 1)
+				break;
+			hsotg->available_host_channels--;
+		}
+
+		if (dwc2_assign_and_init_hc(hsotg, qh))
+			break;
+
+		/*
+		 * Move the QH from the non-periodic inactive schedule to the
+		 * non-periodic active schedule
+		 */
+		qh_ptr = qh_ptr->next;
+		list_move_tail(&qh->qh_list_entry,
+			       &hsotg->non_periodic_sched_active);
+
+		if (ret_val == DWC2_TRANSACTION_NONE)
+			ret_val = DWC2_TRANSACTION_NON_PERIODIC;
+		else
+			ret_val = DWC2_TRANSACTION_ALL;
+
+		if (!hsotg->params.uframe_sched)
+			hsotg->non_periodic_channels++;
+	}
+
+	return ret_val;
+}
+
+/**
+ * dwc2_queue_transaction() - Attempts to queue a single transaction request for
+ * a host channel associated with either a periodic or non-periodic transfer
+ *
+ * @hsotg: The HCD state structure
+ * @chan:  Host channel descriptor associated with either a periodic or
+ *         non-periodic transfer
+ * @fifo_dwords_avail: Number of DWORDs available in the periodic Tx FIFO
+ *                     for periodic transfers or the non-periodic Tx FIFO
+ *                     for non-periodic transfers
+ *
+ * Return: 1 if a request is queued and more requests may be needed to
+ * complete the transfer, 0 if no more requests are required for this
+ * transfer, -1 if there is insufficient space in the Tx FIFO
+ *
+ * This function assumes that there is space available in the appropriate
+ * request queue. For an OUT transfer or SETUP transaction in Slave mode,
+ * it checks whether space is available in the appropriate Tx FIFO.
+ *
+ * Must be called with interrupt disabled and spinlock held
+ */
+static int dwc2_queue_transaction(struct dwc2_hsotg *hsotg,
+				  struct dwc2_host_chan *chan,
+				  u16 fifo_dwords_avail)
+{
+	int retval = 0;
+
+	if (chan->do_split)
+		/* Put ourselves on the list to keep order straight */
+		list_move_tail(&chan->split_order_list_entry,
+			       &hsotg->split_order);
+
+	if (hsotg->params.host_dma && chan->qh) {
+		if (hsotg->params.dma_desc_enable) {
+			if (!chan->xfer_started ||
+			    chan->ep_type == USB_ENDPOINT_XFER_ISOC) {
+				dwc2_hcd_start_xfer_ddma(hsotg, chan->qh);
+				chan->qh->ping_state = 0;
+			}
+		} else if (!chan->xfer_started) {
+			dwc2_hc_start_transfer(hsotg, chan);
+			chan->qh->ping_state = 0;
+		}
+	} else if (chan->halt_pending) {
+		/* Don't queue a request if the channel has been halted */
+	} else if (chan->halt_on_queue) {
+		dwc2_hc_halt(hsotg, chan, chan->halt_status);
+	} else if (chan->do_ping) {
+		if (!chan->xfer_started)
+			dwc2_hc_start_transfer(hsotg, chan);
+	} else if (!chan->ep_is_in ||
+		   chan->data_pid_start == DWC2_HC_PID_SETUP) {
+		if ((fifo_dwords_avail * 4) >= chan->max_packet) {
+			if (!chan->xfer_started) {
+				dwc2_hc_start_transfer(hsotg, chan);
+				retval = 1;
+			} else {
+				retval = dwc2_hc_continue_transfer(hsotg, chan);
+			}
+		} else {
+			retval = -1;
+		}
+	} else {
+		if (!chan->xfer_started) {
+			dwc2_hc_start_transfer(hsotg, chan);
+			retval = 1;
+		} else {
+			retval = dwc2_hc_continue_transfer(hsotg, chan);
+		}
+	}
+
+	return retval;
+}
+
+/*
+ * Processes periodic channels for the next frame and queues transactions for
+ * these channels to the DWC_otg controller. After queueing transactions, the
+ * Periodic Tx FIFO Empty interrupt is enabled if there are more transactions
+ * to queue as Periodic Tx FIFO or request queue space becomes available.
+ * Otherwise, the Periodic Tx FIFO Empty interrupt is disabled.
+ *
+ * Must be called with interrupt disabled and spinlock held
+ */
+static void dwc2_process_periodic_channels(struct dwc2_hsotg *hsotg)
+{
+	struct list_head *qh_ptr;
+	struct dwc2_qh *qh;
+	u32 tx_status;
+	u32 fspcavail;
+	u32 gintmsk;
+	int status;
+	bool no_queue_space = false;
+	bool no_fifo_space = false;
+	u32 qspcavail;
+
+	/* If empty list then just adjust interrupt enables */
+	if (list_empty(&hsotg->periodic_sched_assigned))
+		goto exit;
+
+	if (dbg_perio())
+		dev_vdbg(hsotg->dev, "Queue periodic transactions\n");
+
+	tx_status = dwc2_readl(hsotg, HPTXSTS);
+	qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >>
+		    TXSTS_QSPCAVAIL_SHIFT;
+	fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >>
+		    TXSTS_FSPCAVAIL_SHIFT;
+
+	if (dbg_perio()) {
+		dev_vdbg(hsotg->dev, "  P Tx Req Queue Space Avail (before queue): %d\n",
+			 qspcavail);
+		dev_vdbg(hsotg->dev, "  P Tx FIFO Space Avail (before queue): %d\n",
+			 fspcavail);
+	}
+
+	qh_ptr = hsotg->periodic_sched_assigned.next;
+	while (qh_ptr != &hsotg->periodic_sched_assigned) {
+		tx_status = dwc2_readl(hsotg, HPTXSTS);
+		qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >>
+			    TXSTS_QSPCAVAIL_SHIFT;
+		if (qspcavail == 0) {
+			no_queue_space = true;
+			break;
+		}
+
+		qh = list_entry(qh_ptr, struct dwc2_qh, qh_list_entry);
+		if (!qh->channel) {
+			qh_ptr = qh_ptr->next;
+			continue;
+		}
+
+		/* Make sure EP's TT buffer is clean before queueing qtds */
+		if (qh->tt_buffer_dirty) {
+			qh_ptr = qh_ptr->next;
+			continue;
+		}
+
+		/*
+		 * Set a flag if we're queuing high-bandwidth in slave mode.
+		 * The flag prevents any halts to get into the request queue in
+		 * the middle of multiple high-bandwidth packets getting queued.
+		 */
+		if (!hsotg->params.host_dma &&
+		    qh->channel->multi_count > 1)
+			hsotg->queuing_high_bandwidth = 1;
+
+		fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >>
+			    TXSTS_FSPCAVAIL_SHIFT;
+		status = dwc2_queue_transaction(hsotg, qh->channel, fspcavail);
+		if (status < 0) {
+			no_fifo_space = true;
+			break;
+		}
+
+		/*
+		 * In Slave mode, stay on the current transfer until there is
+		 * nothing more to do or the high-bandwidth request count is
+		 * reached. In DMA mode, only need to queue one request. The
+		 * controller automatically handles multiple packets for
+		 * high-bandwidth transfers.
+		 */
+		if (hsotg->params.host_dma || status == 0 ||
+		    qh->channel->requests == qh->channel->multi_count) {
+			qh_ptr = qh_ptr->next;
+			/*
+			 * Move the QH from the periodic assigned schedule to
+			 * the periodic queued schedule
+			 */
+			list_move_tail(&qh->qh_list_entry,
+				       &hsotg->periodic_sched_queued);
+
+			/* done queuing high bandwidth */
+			hsotg->queuing_high_bandwidth = 0;
+		}
+	}
+
+exit:
+	if (no_queue_space || no_fifo_space ||
+	    (!hsotg->params.host_dma &&
+	     !list_empty(&hsotg->periodic_sched_assigned))) {
+		/*
+		 * May need to queue more transactions as the request
+		 * queue or Tx FIFO empties. Enable the periodic Tx
+		 * FIFO empty interrupt. (Always use the half-empty
+		 * level to ensure that new requests are loaded as
+		 * soon as possible.)
+		 */
+		gintmsk = dwc2_readl(hsotg, GINTMSK);
+		if (!(gintmsk & GINTSTS_PTXFEMP)) {
+			gintmsk |= GINTSTS_PTXFEMP;
+			dwc2_writel(hsotg, gintmsk, GINTMSK);
+		}
+	} else {
+		/*
+		 * Disable the Tx FIFO empty interrupt since there are
+		 * no more transactions that need to be queued right
+		 * now. This function is called from interrupt
+		 * handlers to queue more transactions as transfer
+		 * states change.
+		 */
+		gintmsk = dwc2_readl(hsotg, GINTMSK);
+		if (gintmsk & GINTSTS_PTXFEMP) {
+			gintmsk &= ~GINTSTS_PTXFEMP;
+			dwc2_writel(hsotg, gintmsk, GINTMSK);
+		}
+	}
+}
+
+/*
+ * Processes active non-periodic channels and queues transactions for these
+ * channels to the DWC_otg controller. After queueing transactions, the NP Tx
+ * FIFO Empty interrupt is enabled if there are more transactions to queue as
+ * NP Tx FIFO or request queue space becomes available. Otherwise, the NP Tx
+ * FIFO Empty interrupt is disabled.
+ *
+ * Must be called with interrupt disabled and spinlock held
+ */
+static void dwc2_process_non_periodic_channels(struct dwc2_hsotg *hsotg)
+{
+	struct list_head *orig_qh_ptr;
+	struct dwc2_qh *qh;
+	u32 tx_status;
+	u32 qspcavail;
+	u32 fspcavail;
+	u32 gintmsk;
+	int status;
+	int no_queue_space = 0;
+	int no_fifo_space = 0;
+	int more_to_do = 0;
+
+	dev_vdbg(hsotg->dev, "Queue non-periodic transactions\n");
+
+	tx_status = dwc2_readl(hsotg, GNPTXSTS);
+	qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >>
+		    TXSTS_QSPCAVAIL_SHIFT;
+	fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >>
+		    TXSTS_FSPCAVAIL_SHIFT;
+	dev_vdbg(hsotg->dev, "  NP Tx Req Queue Space Avail (before queue): %d\n",
+		 qspcavail);
+	dev_vdbg(hsotg->dev, "  NP Tx FIFO Space Avail (before queue): %d\n",
+		 fspcavail);
+
+	/*
+	 * Keep track of the starting point. Skip over the start-of-list
+	 * entry.
+	 */
+	if (hsotg->non_periodic_qh_ptr == &hsotg->non_periodic_sched_active)
+		hsotg->non_periodic_qh_ptr = hsotg->non_periodic_qh_ptr->next;
+	orig_qh_ptr = hsotg->non_periodic_qh_ptr;
+
+	/*
+	 * Process once through the active list or until no more space is
+	 * available in the request queue or the Tx FIFO
+	 */
+	do {
+		tx_status = dwc2_readl(hsotg, GNPTXSTS);
+		qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >>
+			    TXSTS_QSPCAVAIL_SHIFT;
+		if (!hsotg->params.host_dma && qspcavail == 0) {
+			no_queue_space = 1;
+			break;
+		}
+
+		qh = list_entry(hsotg->non_periodic_qh_ptr, struct dwc2_qh,
+				qh_list_entry);
+		if (!qh->channel)
+			goto next;
+
+		/* Make sure EP's TT buffer is clean before queueing qtds */
+		if (qh->tt_buffer_dirty)
+			goto next;
+
+		fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >>
+			    TXSTS_FSPCAVAIL_SHIFT;
+		status = dwc2_queue_transaction(hsotg, qh->channel, fspcavail);
+
+		if (status > 0) {
+			more_to_do = 1;
+		} else if (status < 0) {
+			no_fifo_space = 1;
+			break;
+		}
+next:
+		/* Advance to next QH, skipping start-of-list entry */
+		hsotg->non_periodic_qh_ptr = hsotg->non_periodic_qh_ptr->next;
+		if (hsotg->non_periodic_qh_ptr ==
+				&hsotg->non_periodic_sched_active)
+			hsotg->non_periodic_qh_ptr =
+					hsotg->non_periodic_qh_ptr->next;
+	} while (hsotg->non_periodic_qh_ptr != orig_qh_ptr);
+
+	if (!hsotg->params.host_dma) {
+		tx_status = dwc2_readl(hsotg, GNPTXSTS);
+		qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >>
+			    TXSTS_QSPCAVAIL_SHIFT;
+		fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >>
+			    TXSTS_FSPCAVAIL_SHIFT;
+		dev_vdbg(hsotg->dev,
+			 "  NP Tx Req Queue Space Avail (after queue): %d\n",
+			 qspcavail);
+		dev_vdbg(hsotg->dev,
+			 "  NP Tx FIFO Space Avail (after queue): %d\n",
+			 fspcavail);
+
+		if (more_to_do || no_queue_space || no_fifo_space) {
+			/*
+			 * May need to queue more transactions as the request
+			 * queue or Tx FIFO empties. Enable the non-periodic
+			 * Tx FIFO empty interrupt. (Always use the half-empty
+			 * level to ensure that new requests are loaded as
+			 * soon as possible.)
+			 */
+			gintmsk = dwc2_readl(hsotg, GINTMSK);
+			gintmsk |= GINTSTS_NPTXFEMP;
+			dwc2_writel(hsotg, gintmsk, GINTMSK);
+		} else {
+			/*
+			 * Disable the Tx FIFO empty interrupt since there are
+			 * no more transactions that need to be queued right
+			 * now. This function is called from interrupt
+			 * handlers to queue more transactions as transfer
+			 * states change.
+			 */
+			gintmsk = dwc2_readl(hsotg, GINTMSK);
+			gintmsk &= ~GINTSTS_NPTXFEMP;
+			dwc2_writel(hsotg, gintmsk, GINTMSK);
+		}
+	}
+}
+
+/**
+ * dwc2_hcd_queue_transactions() - Processes the currently active host channels
+ * and queues transactions for these channels to the DWC_otg controller. Called
+ * from the HCD interrupt handler functions.
+ *
+ * @hsotg:   The HCD state structure
+ * @tr_type: The type(s) of transactions to queue (non-periodic, periodic,
+ *           or both)
+ *
+ * Must be called with interrupt disabled and spinlock held
+ */
+void dwc2_hcd_queue_transactions(struct dwc2_hsotg *hsotg,
+				 enum dwc2_transaction_type tr_type)
+{
+#ifdef DWC2_DEBUG_SOF
+	dev_vdbg(hsotg->dev, "Queue Transactions\n");
+#endif
+	/* Process host channels associated with periodic transfers */
+	if (tr_type == DWC2_TRANSACTION_PERIODIC ||
+	    tr_type == DWC2_TRANSACTION_ALL)
+		dwc2_process_periodic_channels(hsotg);
+
+	/* Process host channels associated with non-periodic transfers */
+	if (tr_type == DWC2_TRANSACTION_NON_PERIODIC ||
+	    tr_type == DWC2_TRANSACTION_ALL) {
+		if (!list_empty(&hsotg->non_periodic_sched_active)) {
+			dwc2_process_non_periodic_channels(hsotg);
+		} else {
+			/*
+			 * Ensure NP Tx FIFO empty interrupt is disabled when
+			 * there are no non-periodic transfers to process
+			 */
+			u32 gintmsk = dwc2_readl(hsotg, GINTMSK);
+
+			gintmsk &= ~GINTSTS_NPTXFEMP;
+			dwc2_writel(hsotg, gintmsk, GINTMSK);
+		}
+	}
+}
+
+static void dwc2_conn_id_status_change(struct work_struct *work)
+{
+	struct dwc2_hsotg *hsotg = container_of(work, struct dwc2_hsotg,
+						wf_otg);
+	u32 count = 0;
+	u32 gotgctl;
+	unsigned long flags;
+
+	dev_dbg(hsotg->dev, "%s()\n", __func__);
+
+	gotgctl = dwc2_readl(hsotg, GOTGCTL);
+	dev_dbg(hsotg->dev, "gotgctl=%0x\n", gotgctl);
+	dev_dbg(hsotg->dev, "gotgctl.b.conidsts=%d\n",
+		!!(gotgctl & GOTGCTL_CONID_B));
+
+	/* B-Device connector (Device Mode) */
+	if (gotgctl & GOTGCTL_CONID_B) {
+		dwc2_vbus_supply_exit(hsotg);
+		/* Wait for switch to device mode */
+		dev_dbg(hsotg->dev, "connId B\n");
+		if (hsotg->bus_suspended) {
+			dev_info(hsotg->dev,
+				 "Do port resume before switching to device mode\n");
+			dwc2_port_resume(hsotg);
+		}
+		while (!dwc2_is_device_mode(hsotg)) {
+			dev_info(hsotg->dev,
+				 "Waiting for Peripheral Mode, Mode=%s\n",
+				 dwc2_is_host_mode(hsotg) ? "Host" :
+				 "Peripheral");
+			msleep(20);
+			/*
+			 * Sometimes the initial GOTGCTRL read is wrong, so
+			 * check it again and jump to host mode if that was
+			 * the case.
+			 */
+			gotgctl = dwc2_readl(hsotg, GOTGCTL);
+			if (!(gotgctl & GOTGCTL_CONID_B))
+				goto host;
+			if (++count > 250)
+				break;
+		}
+		if (count > 250)
+			dev_err(hsotg->dev,
+				"Connection id status change timed out\n");
+		hsotg->op_state = OTG_STATE_B_PERIPHERAL;
+		dwc2_core_init(hsotg, false);
+		dwc2_enable_global_interrupts(hsotg);
+		spin_lock_irqsave(&hsotg->lock, flags);
+		dwc2_hsotg_core_init_disconnected(hsotg, false);
+		spin_unlock_irqrestore(&hsotg->lock, flags);
+		/* Enable ACG feature in device mode,if supported */
+		dwc2_enable_acg(hsotg);
+		dwc2_hsotg_core_connect(hsotg);
+	} else {
+host:
+		/* A-Device connector (Host Mode) */
+		dev_dbg(hsotg->dev, "connId A\n");
+		while (!dwc2_is_host_mode(hsotg)) {
+			dev_info(hsotg->dev, "Waiting for Host Mode, Mode=%s\n",
+				 dwc2_is_host_mode(hsotg) ?
+				 "Host" : "Peripheral");
+			msleep(20);
+			if (++count > 250)
+				break;
+		}
+		if (count > 250)
+			dev_err(hsotg->dev,
+				"Connection id status change timed out\n");
+
+		spin_lock_irqsave(&hsotg->lock, flags);
+		dwc2_hsotg_disconnect(hsotg);
+		spin_unlock_irqrestore(&hsotg->lock, flags);
+
+		hsotg->op_state = OTG_STATE_A_HOST;
+		/* Initialize the Core for Host mode */
+		dwc2_core_init(hsotg, false);
+		dwc2_enable_global_interrupts(hsotg);
+		dwc2_hcd_start(hsotg);
+	}
+}
+
+static void dwc2_wakeup_detected(struct timer_list *t)
+{
+	struct dwc2_hsotg *hsotg = from_timer(hsotg, t, wkp_timer);
+	u32 hprt0;
+
+	dev_dbg(hsotg->dev, "%s()\n", __func__);
+
+	/*
+	 * Clear the Resume after 70ms. (Need 20 ms minimum. Use 70 ms
+	 * so that OPT tests pass with all PHYs.)
+	 */
+	hprt0 = dwc2_read_hprt0(hsotg);
+	dev_dbg(hsotg->dev, "Resume: HPRT0=%0x\n", hprt0);
+	hprt0 &= ~HPRT0_RES;
+	dwc2_writel(hsotg, hprt0, HPRT0);
+	dev_dbg(hsotg->dev, "Clear Resume: HPRT0=%0x\n",
+		dwc2_readl(hsotg, HPRT0));
+
+	dwc2_hcd_rem_wakeup(hsotg);
+	hsotg->bus_suspended = false;
+
+	/* Change to L0 state */
+	hsotg->lx_state = DWC2_L0;
+}
+
+static int dwc2_host_is_b_hnp_enabled(struct dwc2_hsotg *hsotg)
+{
+	struct usb_hcd *hcd = dwc2_hsotg_to_hcd(hsotg);
+
+	return hcd->self.b_hnp_enable;
+}
+
+/* Must NOT be called with interrupt disabled or spinlock held */
+static void dwc2_port_suspend(struct dwc2_hsotg *hsotg, u16 windex)
+{
+	unsigned long flags;
+	u32 hprt0;
+	u32 pcgctl;
+	u32 gotgctl;
+
+	dev_dbg(hsotg->dev, "%s()\n", __func__);
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+
+	if (windex == hsotg->otg_port && dwc2_host_is_b_hnp_enabled(hsotg)) {
+		gotgctl = dwc2_readl(hsotg, GOTGCTL);
+		gotgctl |= GOTGCTL_HSTSETHNPEN;
+		dwc2_writel(hsotg, gotgctl, GOTGCTL);
+		hsotg->op_state = OTG_STATE_A_SUSPEND;
+	}
+
+	hprt0 = dwc2_read_hprt0(hsotg);
+	hprt0 |= HPRT0_SUSP;
+	dwc2_writel(hsotg, hprt0, HPRT0);
+
+	hsotg->bus_suspended = true;
+
+	/*
+	 * If power_down is supported, Phy clock will be suspended
+	 * after registers are backuped.
+	 */
+	if (!hsotg->params.power_down) {
+		/* Suspend the Phy Clock */
+		pcgctl = dwc2_readl(hsotg, PCGCTL);
+		pcgctl |= PCGCTL_STOPPCLK;
+		dwc2_writel(hsotg, pcgctl, PCGCTL);
+		udelay(10);
+	}
+
+	/* For HNP the bus must be suspended for at least 200ms */
+	if (dwc2_host_is_b_hnp_enabled(hsotg)) {
+		pcgctl = dwc2_readl(hsotg, PCGCTL);
+		pcgctl &= ~PCGCTL_STOPPCLK;
+		dwc2_writel(hsotg, pcgctl, PCGCTL);
+
+		spin_unlock_irqrestore(&hsotg->lock, flags);
+
+		msleep(200);
+	} else {
+		spin_unlock_irqrestore(&hsotg->lock, flags);
+	}
+}
+
+/* Must NOT be called with interrupt disabled or spinlock held */
+static void dwc2_port_resume(struct dwc2_hsotg *hsotg)
+{
+	unsigned long flags;
+	u32 hprt0;
+	u32 pcgctl;
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+
+	/*
+	 * If power_down is supported, Phy clock is already resumed
+	 * after registers restore.
+	 */
+	if (!hsotg->params.power_down) {
+		pcgctl = dwc2_readl(hsotg, PCGCTL);
+		pcgctl &= ~PCGCTL_STOPPCLK;
+		dwc2_writel(hsotg, pcgctl, PCGCTL);
+		spin_unlock_irqrestore(&hsotg->lock, flags);
+		msleep(20);
+		spin_lock_irqsave(&hsotg->lock, flags);
+	}
+
+	hprt0 = dwc2_read_hprt0(hsotg);
+	hprt0 |= HPRT0_RES;
+	hprt0 &= ~HPRT0_SUSP;
+	dwc2_writel(hsotg, hprt0, HPRT0);
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+
+	msleep(USB_RESUME_TIMEOUT);
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+	hprt0 = dwc2_read_hprt0(hsotg);
+	hprt0 &= ~(HPRT0_RES | HPRT0_SUSP);
+	dwc2_writel(hsotg, hprt0, HPRT0);
+	hsotg->bus_suspended = false;
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+}
+
+/* Handles hub class-specific requests */
+static int dwc2_hcd_hub_control(struct dwc2_hsotg *hsotg, u16 typereq,
+				u16 wvalue, u16 windex, char *buf, u16 wlength)
+{
+	struct usb_hub_descriptor *hub_desc;
+	int retval = 0;
+	u32 hprt0;
+	u32 port_status;
+	u32 speed;
+	u32 pcgctl;
+	u32 pwr;
+
+	switch (typereq) {
+	case ClearHubFeature:
+		dev_dbg(hsotg->dev, "ClearHubFeature %1xh\n", wvalue);
+
+		switch (wvalue) {
+		case C_HUB_LOCAL_POWER:
+		case C_HUB_OVER_CURRENT:
+			/* Nothing required here */
+			break;
+
+		default:
+			retval = -EINVAL;
+			dev_err(hsotg->dev,
+				"ClearHubFeature request %1xh unknown\n",
+				wvalue);
+		}
+		break;
+
+	case ClearPortFeature:
+		if (wvalue != USB_PORT_FEAT_L1)
+			if (!windex || windex > 1)
+				goto error;
+		switch (wvalue) {
+		case USB_PORT_FEAT_ENABLE:
+			dev_dbg(hsotg->dev,
+				"ClearPortFeature USB_PORT_FEAT_ENABLE\n");
+			hprt0 = dwc2_read_hprt0(hsotg);
+			hprt0 |= HPRT0_ENA;
+			dwc2_writel(hsotg, hprt0, HPRT0);
+			break;
+
+		case USB_PORT_FEAT_SUSPEND:
+			dev_dbg(hsotg->dev,
+				"ClearPortFeature USB_PORT_FEAT_SUSPEND\n");
+
+			if (hsotg->bus_suspended) {
+				if (hsotg->hibernated)
+					dwc2_exit_hibernation(hsotg, 0, 0, 1);
+				else
+					dwc2_port_resume(hsotg);
+			}
+			break;
+
+		case USB_PORT_FEAT_POWER:
+			dev_dbg(hsotg->dev,
+				"ClearPortFeature USB_PORT_FEAT_POWER\n");
+			hprt0 = dwc2_read_hprt0(hsotg);
+			pwr = hprt0 & HPRT0_PWR;
+			hprt0 &= ~HPRT0_PWR;
+			dwc2_writel(hsotg, hprt0, HPRT0);
+			if (pwr)
+				dwc2_vbus_supply_exit(hsotg);
+			break;
+
+		case USB_PORT_FEAT_INDICATOR:
+			dev_dbg(hsotg->dev,
+				"ClearPortFeature USB_PORT_FEAT_INDICATOR\n");
+			/* Port indicator not supported */
+			break;
+
+		case USB_PORT_FEAT_C_CONNECTION:
+			/*
+			 * Clears driver's internal Connect Status Change flag
+			 */
+			dev_dbg(hsotg->dev,
+				"ClearPortFeature USB_PORT_FEAT_C_CONNECTION\n");
+			hsotg->flags.b.port_connect_status_change = 0;
+			break;
+
+		case USB_PORT_FEAT_C_RESET:
+			/* Clears driver's internal Port Reset Change flag */
+			dev_dbg(hsotg->dev,
+				"ClearPortFeature USB_PORT_FEAT_C_RESET\n");
+			hsotg->flags.b.port_reset_change = 0;
+			break;
+
+		case USB_PORT_FEAT_C_ENABLE:
+			/*
+			 * Clears the driver's internal Port Enable/Disable
+			 * Change flag
+			 */
+			dev_dbg(hsotg->dev,
+				"ClearPortFeature USB_PORT_FEAT_C_ENABLE\n");
+			hsotg->flags.b.port_enable_change = 0;
+			break;
+
+		case USB_PORT_FEAT_C_SUSPEND:
+			/*
+			 * Clears the driver's internal Port Suspend Change
+			 * flag, which is set when resume signaling on the host
+			 * port is complete
+			 */
+			dev_dbg(hsotg->dev,
+				"ClearPortFeature USB_PORT_FEAT_C_SUSPEND\n");
+			hsotg->flags.b.port_suspend_change = 0;
+			break;
+
+		case USB_PORT_FEAT_C_PORT_L1:
+			dev_dbg(hsotg->dev,
+				"ClearPortFeature USB_PORT_FEAT_C_PORT_L1\n");
+			hsotg->flags.b.port_l1_change = 0;
+			break;
+
+		case USB_PORT_FEAT_C_OVER_CURRENT:
+			dev_dbg(hsotg->dev,
+				"ClearPortFeature USB_PORT_FEAT_C_OVER_CURRENT\n");
+			hsotg->flags.b.port_over_current_change = 0;
+			break;
+
+		default:
+			retval = -EINVAL;
+			dev_err(hsotg->dev,
+				"ClearPortFeature request %1xh unknown or unsupported\n",
+				wvalue);
+		}
+		break;
+
+	case GetHubDescriptor:
+		dev_dbg(hsotg->dev, "GetHubDescriptor\n");
+		hub_desc = (struct usb_hub_descriptor *)buf;
+		hub_desc->bDescLength = 9;
+		hub_desc->bDescriptorType = USB_DT_HUB;
+		hub_desc->bNbrPorts = 1;
+		hub_desc->wHubCharacteristics =
+			cpu_to_le16(HUB_CHAR_COMMON_LPSM |
+				    HUB_CHAR_INDV_PORT_OCPM);
+		hub_desc->bPwrOn2PwrGood = 1;
+		hub_desc->bHubContrCurrent = 0;
+		hub_desc->u.hs.DeviceRemovable[0] = 0;
+		hub_desc->u.hs.DeviceRemovable[1] = 0xff;
+		break;
+
+	case GetHubStatus:
+		dev_dbg(hsotg->dev, "GetHubStatus\n");
+		memset(buf, 0, 4);
+		break;
+
+	case GetPortStatus:
+		dev_vdbg(hsotg->dev,
+			 "GetPortStatus wIndex=0x%04x flags=0x%08x\n", windex,
+			 hsotg->flags.d32);
+		if (!windex || windex > 1)
+			goto error;
+
+		port_status = 0;
+		if (hsotg->flags.b.port_connect_status_change)
+			port_status |= USB_PORT_STAT_C_CONNECTION << 16;
+		if (hsotg->flags.b.port_enable_change)
+			port_status |= USB_PORT_STAT_C_ENABLE << 16;
+		if (hsotg->flags.b.port_suspend_change)
+			port_status |= USB_PORT_STAT_C_SUSPEND << 16;
+		if (hsotg->flags.b.port_l1_change)
+			port_status |= USB_PORT_STAT_C_L1 << 16;
+		if (hsotg->flags.b.port_reset_change)
+			port_status |= USB_PORT_STAT_C_RESET << 16;
+		if (hsotg->flags.b.port_over_current_change) {
+			dev_warn(hsotg->dev, "Overcurrent change detected\n");
+			port_status |= USB_PORT_STAT_C_OVERCURRENT << 16;
+		}
+
+		if (!hsotg->flags.b.port_connect_status) {
+			/*
+			 * The port is disconnected, which means the core is
+			 * either in device mode or it soon will be. Just
+			 * return 0's for the remainder of the port status
+			 * since the port register can't be read if the core
+			 * is in device mode.
+			 */
+			*(__le32 *)buf = cpu_to_le32(port_status);
+			break;
+		}
+
+		hprt0 = dwc2_readl(hsotg, HPRT0);
+		dev_vdbg(hsotg->dev, "  HPRT0: 0x%08x\n", hprt0);
+
+		if (hprt0 & HPRT0_CONNSTS)
+			port_status |= USB_PORT_STAT_CONNECTION;
+		if (hprt0 & HPRT0_ENA)
+			port_status |= USB_PORT_STAT_ENABLE;
+		if (hprt0 & HPRT0_SUSP)
+			port_status |= USB_PORT_STAT_SUSPEND;
+		if (hprt0 & HPRT0_OVRCURRACT)
+			port_status |= USB_PORT_STAT_OVERCURRENT;
+		if (hprt0 & HPRT0_RST)
+			port_status |= USB_PORT_STAT_RESET;
+		if (hprt0 & HPRT0_PWR)
+			port_status |= USB_PORT_STAT_POWER;
+
+		speed = (hprt0 & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT;
+		if (speed == HPRT0_SPD_HIGH_SPEED)
+			port_status |= USB_PORT_STAT_HIGH_SPEED;
+		else if (speed == HPRT0_SPD_LOW_SPEED)
+			port_status |= USB_PORT_STAT_LOW_SPEED;
+
+		if (hprt0 & HPRT0_TSTCTL_MASK)
+			port_status |= USB_PORT_STAT_TEST;
+		/* USB_PORT_FEAT_INDICATOR unsupported always 0 */
+
+		if (hsotg->params.dma_desc_fs_enable) {
+			/*
+			 * Enable descriptor DMA only if a full speed
+			 * device is connected.
+			 */
+			if (hsotg->new_connection &&
+			    ((port_status &
+			      (USB_PORT_STAT_CONNECTION |
+			       USB_PORT_STAT_HIGH_SPEED |
+			       USB_PORT_STAT_LOW_SPEED)) ==
+			       USB_PORT_STAT_CONNECTION)) {
+				u32 hcfg;
+
+				dev_info(hsotg->dev, "Enabling descriptor DMA mode\n");
+				hsotg->params.dma_desc_enable = true;
+				hcfg = dwc2_readl(hsotg, HCFG);
+				hcfg |= HCFG_DESCDMA;
+				dwc2_writel(hsotg, hcfg, HCFG);
+				hsotg->new_connection = false;
+			}
+		}
+
+		dev_vdbg(hsotg->dev, "port_status=%08x\n", port_status);
+		*(__le32 *)buf = cpu_to_le32(port_status);
+		break;
+
+	case SetHubFeature:
+		dev_dbg(hsotg->dev, "SetHubFeature\n");
+		/* No HUB features supported */
+		break;
+
+	case SetPortFeature:
+		dev_dbg(hsotg->dev, "SetPortFeature\n");
+		if (wvalue != USB_PORT_FEAT_TEST && (!windex || windex > 1))
+			goto error;
+
+		if (!hsotg->flags.b.port_connect_status) {
+			/*
+			 * The port is disconnected, which means the core is
+			 * either in device mode or it soon will be. Just
+			 * return without doing anything since the port
+			 * register can't be written if the core is in device
+			 * mode.
+			 */
+			break;
+		}
+
+		switch (wvalue) {
+		case USB_PORT_FEAT_SUSPEND:
+			dev_dbg(hsotg->dev,
+				"SetPortFeature - USB_PORT_FEAT_SUSPEND\n");
+			if (windex != hsotg->otg_port)
+				goto error;
+			if (hsotg->params.power_down == DWC2_POWER_DOWN_PARAM_HIBERNATION)
+				dwc2_enter_hibernation(hsotg, 1);
+			else
+				dwc2_port_suspend(hsotg, windex);
+			break;
+
+		case USB_PORT_FEAT_POWER:
+			dev_dbg(hsotg->dev,
+				"SetPortFeature - USB_PORT_FEAT_POWER\n");
+			hprt0 = dwc2_read_hprt0(hsotg);
+			pwr = hprt0 & HPRT0_PWR;
+			hprt0 |= HPRT0_PWR;
+			dwc2_writel(hsotg, hprt0, HPRT0);
+			if (!pwr)
+				dwc2_vbus_supply_init(hsotg);
+			break;
+
+		case USB_PORT_FEAT_RESET:
+			if (hsotg->params.power_down == DWC2_POWER_DOWN_PARAM_HIBERNATION &&
+			    hsotg->hibernated)
+				dwc2_exit_hibernation(hsotg, 0, 1, 1);
+			hprt0 = dwc2_read_hprt0(hsotg);
+			dev_dbg(hsotg->dev,
+				"SetPortFeature - USB_PORT_FEAT_RESET\n");
+			pcgctl = dwc2_readl(hsotg, PCGCTL);
+			pcgctl &= ~(PCGCTL_ENBL_SLEEP_GATING | PCGCTL_STOPPCLK);
+			dwc2_writel(hsotg, pcgctl, PCGCTL);
+			/* ??? Original driver does this */
+			dwc2_writel(hsotg, 0, PCGCTL);
+
+			hprt0 = dwc2_read_hprt0(hsotg);
+			pwr = hprt0 & HPRT0_PWR;
+			/* Clear suspend bit if resetting from suspend state */
+			hprt0 &= ~HPRT0_SUSP;
+
+			/*
+			 * When B-Host the Port reset bit is set in the Start
+			 * HCD Callback function, so that the reset is started
+			 * within 1ms of the HNP success interrupt
+			 */
+			if (!dwc2_hcd_is_b_host(hsotg)) {
+				hprt0 |= HPRT0_PWR | HPRT0_RST;
+				dev_dbg(hsotg->dev,
+					"In host mode, hprt0=%08x\n", hprt0);
+				dwc2_writel(hsotg, hprt0, HPRT0);
+				if (!pwr)
+					dwc2_vbus_supply_init(hsotg);
+			}
+
+			/* Clear reset bit in 10ms (FS/LS) or 50ms (HS) */
+			msleep(50);
+			hprt0 &= ~HPRT0_RST;
+			dwc2_writel(hsotg, hprt0, HPRT0);
+			hsotg->lx_state = DWC2_L0; /* Now back to On state */
+			break;
+
+		case USB_PORT_FEAT_INDICATOR:
+			dev_dbg(hsotg->dev,
+				"SetPortFeature - USB_PORT_FEAT_INDICATOR\n");
+			/* Not supported */
+			break;
+
+		case USB_PORT_FEAT_TEST:
+			hprt0 = dwc2_read_hprt0(hsotg);
+			dev_dbg(hsotg->dev,
+				"SetPortFeature - USB_PORT_FEAT_TEST\n");
+			hprt0 &= ~HPRT0_TSTCTL_MASK;
+			hprt0 |= (windex >> 8) << HPRT0_TSTCTL_SHIFT;
+			dwc2_writel(hsotg, hprt0, HPRT0);
+			break;
+
+		default:
+			retval = -EINVAL;
+			dev_err(hsotg->dev,
+				"SetPortFeature %1xh unknown or unsupported\n",
+				wvalue);
+			break;
+		}
+		break;
+
+	default:
+error:
+		retval = -EINVAL;
+		dev_dbg(hsotg->dev,
+			"Unknown hub control request: %1xh wIndex: %1xh wValue: %1xh\n",
+			typereq, windex, wvalue);
+		break;
+	}
+
+	return retval;
+}
+
+static int dwc2_hcd_is_status_changed(struct dwc2_hsotg *hsotg, int port)
+{
+	int retval;
+
+	if (port != 1)
+		return -EINVAL;
+
+	retval = (hsotg->flags.b.port_connect_status_change ||
+		  hsotg->flags.b.port_reset_change ||
+		  hsotg->flags.b.port_enable_change ||
+		  hsotg->flags.b.port_suspend_change ||
+		  hsotg->flags.b.port_over_current_change);
+
+	if (retval) {
+		dev_dbg(hsotg->dev,
+			"DWC OTG HCD HUB STATUS DATA: Root port status changed\n");
+		dev_dbg(hsotg->dev, "  port_connect_status_change: %d\n",
+			hsotg->flags.b.port_connect_status_change);
+		dev_dbg(hsotg->dev, "  port_reset_change: %d\n",
+			hsotg->flags.b.port_reset_change);
+		dev_dbg(hsotg->dev, "  port_enable_change: %d\n",
+			hsotg->flags.b.port_enable_change);
+		dev_dbg(hsotg->dev, "  port_suspend_change: %d\n",
+			hsotg->flags.b.port_suspend_change);
+		dev_dbg(hsotg->dev, "  port_over_current_change: %d\n",
+			hsotg->flags.b.port_over_current_change);
+	}
+
+	return retval;
+}
+
+int dwc2_hcd_get_frame_number(struct dwc2_hsotg *hsotg)
+{
+	u32 hfnum = dwc2_readl(hsotg, HFNUM);
+
+#ifdef DWC2_DEBUG_SOF
+	dev_vdbg(hsotg->dev, "DWC OTG HCD GET FRAME NUMBER %d\n",
+		 (hfnum & HFNUM_FRNUM_MASK) >> HFNUM_FRNUM_SHIFT);
+#endif
+	return (hfnum & HFNUM_FRNUM_MASK) >> HFNUM_FRNUM_SHIFT;
+}
+
+int dwc2_hcd_get_future_frame_number(struct dwc2_hsotg *hsotg, int us)
+{
+	u32 hprt = dwc2_readl(hsotg, HPRT0);
+	u32 hfir = dwc2_readl(hsotg, HFIR);
+	u32 hfnum = dwc2_readl(hsotg, HFNUM);
+	unsigned int us_per_frame;
+	unsigned int frame_number;
+	unsigned int remaining;
+	unsigned int interval;
+	unsigned int phy_clks;
+
+	/* High speed has 125 us per (micro) frame; others are 1 ms per */
+	us_per_frame = (hprt & HPRT0_SPD_MASK) ? 1000 : 125;
+
+	/* Extract fields */
+	frame_number = (hfnum & HFNUM_FRNUM_MASK) >> HFNUM_FRNUM_SHIFT;
+	remaining = (hfnum & HFNUM_FRREM_MASK) >> HFNUM_FRREM_SHIFT;
+	interval = (hfir & HFIR_FRINT_MASK) >> HFIR_FRINT_SHIFT;
+
+	/*
+	 * Number of phy clocks since the last tick of the frame number after
+	 * "us" has passed.
+	 */
+	phy_clks = (interval - remaining) +
+		   DIV_ROUND_UP(interval * us, us_per_frame);
+
+	return dwc2_frame_num_inc(frame_number, phy_clks / interval);
+}
+
+int dwc2_hcd_is_b_host(struct dwc2_hsotg *hsotg)
+{
+	return hsotg->op_state == OTG_STATE_B_HOST;
+}
+
+static struct dwc2_hcd_urb *dwc2_hcd_urb_alloc(struct dwc2_hsotg *hsotg,
+					       int iso_desc_count,
+					       gfp_t mem_flags)
+{
+	struct dwc2_hcd_urb *urb;
+
+	urb = kzalloc(struct_size(urb, iso_descs, iso_desc_count), mem_flags);
+	if (urb)
+		urb->packet_count = iso_desc_count;
+	return urb;
+}
+
+static void dwc2_hcd_urb_set_pipeinfo(struct dwc2_hsotg *hsotg,
+				      struct dwc2_hcd_urb *urb, u8 dev_addr,
+				      u8 ep_num, u8 ep_type, u8 ep_dir,
+				      u16 maxp, u16 maxp_mult)
+{
+	if (dbg_perio() ||
+	    ep_type == USB_ENDPOINT_XFER_BULK ||
+	    ep_type == USB_ENDPOINT_XFER_CONTROL)
+		dev_vdbg(hsotg->dev,
+			 "addr=%d, ep_num=%d, ep_dir=%1x, ep_type=%1x, maxp=%d (%d mult)\n",
+			 dev_addr, ep_num, ep_dir, ep_type, maxp, maxp_mult);
+	urb->pipe_info.dev_addr = dev_addr;
+	urb->pipe_info.ep_num = ep_num;
+	urb->pipe_info.pipe_type = ep_type;
+	urb->pipe_info.pipe_dir = ep_dir;
+	urb->pipe_info.maxp = maxp;
+	urb->pipe_info.maxp_mult = maxp_mult;
+}
+
+/*
+ * NOTE: This function will be removed once the peripheral controller code
+ * is integrated and the driver is stable
+ */
+void dwc2_hcd_dump_state(struct dwc2_hsotg *hsotg)
+{
+#ifdef DEBUG
+	struct dwc2_host_chan *chan;
+	struct dwc2_hcd_urb *urb;
+	struct dwc2_qtd *qtd;
+	int num_channels;
+	u32 np_tx_status;
+	u32 p_tx_status;
+	int i;
+
+	num_channels = hsotg->params.host_channels;
+	dev_dbg(hsotg->dev, "\n");
+	dev_dbg(hsotg->dev,
+		"************************************************************\n");
+	dev_dbg(hsotg->dev, "HCD State:\n");
+	dev_dbg(hsotg->dev, "  Num channels: %d\n", num_channels);
+
+	for (i = 0; i < num_channels; i++) {
+		chan = hsotg->hc_ptr_array[i];
+		dev_dbg(hsotg->dev, "  Channel %d:\n", i);
+		dev_dbg(hsotg->dev,
+			"    dev_addr: %d, ep_num: %d, ep_is_in: %d\n",
+			chan->dev_addr, chan->ep_num, chan->ep_is_in);
+		dev_dbg(hsotg->dev, "    speed: %d\n", chan->speed);
+		dev_dbg(hsotg->dev, "    ep_type: %d\n", chan->ep_type);
+		dev_dbg(hsotg->dev, "    max_packet: %d\n", chan->max_packet);
+		dev_dbg(hsotg->dev, "    data_pid_start: %d\n",
+			chan->data_pid_start);
+		dev_dbg(hsotg->dev, "    multi_count: %d\n", chan->multi_count);
+		dev_dbg(hsotg->dev, "    xfer_started: %d\n",
+			chan->xfer_started);
+		dev_dbg(hsotg->dev, "    xfer_buf: %p\n", chan->xfer_buf);
+		dev_dbg(hsotg->dev, "    xfer_dma: %08lx\n",
+			(unsigned long)chan->xfer_dma);
+		dev_dbg(hsotg->dev, "    xfer_len: %d\n", chan->xfer_len);
+		dev_dbg(hsotg->dev, "    xfer_count: %d\n", chan->xfer_count);
+		dev_dbg(hsotg->dev, "    halt_on_queue: %d\n",
+			chan->halt_on_queue);
+		dev_dbg(hsotg->dev, "    halt_pending: %d\n",
+			chan->halt_pending);
+		dev_dbg(hsotg->dev, "    halt_status: %d\n", chan->halt_status);
+		dev_dbg(hsotg->dev, "    do_split: %d\n", chan->do_split);
+		dev_dbg(hsotg->dev, "    complete_split: %d\n",
+			chan->complete_split);
+		dev_dbg(hsotg->dev, "    hub_addr: %d\n", chan->hub_addr);
+		dev_dbg(hsotg->dev, "    hub_port: %d\n", chan->hub_port);
+		dev_dbg(hsotg->dev, "    xact_pos: %d\n", chan->xact_pos);
+		dev_dbg(hsotg->dev, "    requests: %d\n", chan->requests);
+		dev_dbg(hsotg->dev, "    qh: %p\n", chan->qh);
+
+		if (chan->xfer_started) {
+			u32 hfnum, hcchar, hctsiz, hcint, hcintmsk;
+
+			hfnum = dwc2_readl(hsotg, HFNUM);
+			hcchar = dwc2_readl(hsotg, HCCHAR(i));
+			hctsiz = dwc2_readl(hsotg, HCTSIZ(i));
+			hcint = dwc2_readl(hsotg, HCINT(i));
+			hcintmsk = dwc2_readl(hsotg, HCINTMSK(i));
+			dev_dbg(hsotg->dev, "    hfnum: 0x%08x\n", hfnum);
+			dev_dbg(hsotg->dev, "    hcchar: 0x%08x\n", hcchar);
+			dev_dbg(hsotg->dev, "    hctsiz: 0x%08x\n", hctsiz);
+			dev_dbg(hsotg->dev, "    hcint: 0x%08x\n", hcint);
+			dev_dbg(hsotg->dev, "    hcintmsk: 0x%08x\n", hcintmsk);
+		}
+
+		if (!(chan->xfer_started && chan->qh))
+			continue;
+
+		list_for_each_entry(qtd, &chan->qh->qtd_list, qtd_list_entry) {
+			if (!qtd->in_process)
+				break;
+			urb = qtd->urb;
+			dev_dbg(hsotg->dev, "    URB Info:\n");
+			dev_dbg(hsotg->dev, "      qtd: %p, urb: %p\n",
+				qtd, urb);
+			if (urb) {
+				dev_dbg(hsotg->dev,
+					"      Dev: %d, EP: %d %s\n",
+					dwc2_hcd_get_dev_addr(&urb->pipe_info),
+					dwc2_hcd_get_ep_num(&urb->pipe_info),
+					dwc2_hcd_is_pipe_in(&urb->pipe_info) ?
+					"IN" : "OUT");
+				dev_dbg(hsotg->dev,
+					"      Max packet size: %d (%d mult)\n",
+					dwc2_hcd_get_maxp(&urb->pipe_info),
+					dwc2_hcd_get_maxp_mult(&urb->pipe_info));
+				dev_dbg(hsotg->dev,
+					"      transfer_buffer: %p\n",
+					urb->buf);
+				dev_dbg(hsotg->dev,
+					"      transfer_dma: %08lx\n",
+					(unsigned long)urb->dma);
+				dev_dbg(hsotg->dev,
+					"      transfer_buffer_length: %d\n",
+					urb->length);
+				dev_dbg(hsotg->dev, "      actual_length: %d\n",
+					urb->actual_length);
+			}
+		}
+	}
+
+	dev_dbg(hsotg->dev, "  non_periodic_channels: %d\n",
+		hsotg->non_periodic_channels);
+	dev_dbg(hsotg->dev, "  periodic_channels: %d\n",
+		hsotg->periodic_channels);
+	dev_dbg(hsotg->dev, "  periodic_usecs: %d\n", hsotg->periodic_usecs);
+	np_tx_status = dwc2_readl(hsotg, GNPTXSTS);
+	dev_dbg(hsotg->dev, "  NP Tx Req Queue Space Avail: %d\n",
+		(np_tx_status & TXSTS_QSPCAVAIL_MASK) >> TXSTS_QSPCAVAIL_SHIFT);
+	dev_dbg(hsotg->dev, "  NP Tx FIFO Space Avail: %d\n",
+		(np_tx_status & TXSTS_FSPCAVAIL_MASK) >> TXSTS_FSPCAVAIL_SHIFT);
+	p_tx_status = dwc2_readl(hsotg, HPTXSTS);
+	dev_dbg(hsotg->dev, "  P Tx Req Queue Space Avail: %d\n",
+		(p_tx_status & TXSTS_QSPCAVAIL_MASK) >> TXSTS_QSPCAVAIL_SHIFT);
+	dev_dbg(hsotg->dev, "  P Tx FIFO Space Avail: %d\n",
+		(p_tx_status & TXSTS_FSPCAVAIL_MASK) >> TXSTS_FSPCAVAIL_SHIFT);
+	dwc2_dump_global_registers(hsotg);
+	dwc2_dump_host_registers(hsotg);
+	dev_dbg(hsotg->dev,
+		"************************************************************\n");
+	dev_dbg(hsotg->dev, "\n");
+#endif
+}
+
+struct wrapper_priv_data {
+	struct dwc2_hsotg *hsotg;
+};
+
+/* Gets the dwc2_hsotg from a usb_hcd */
+static struct dwc2_hsotg *dwc2_hcd_to_hsotg(struct usb_hcd *hcd)
+{
+	struct wrapper_priv_data *p;
+
+	p = (struct wrapper_priv_data *)&hcd->hcd_priv;
+	return p->hsotg;
+}
+
+/**
+ * dwc2_host_get_tt_info() - Get the dwc2_tt associated with context
+ *
+ * This will get the dwc2_tt structure (and ttport) associated with the given
+ * context (which is really just a struct urb pointer).
+ *
+ * The first time this is called for a given TT we allocate memory for our
+ * structure.  When everyone is done and has called dwc2_host_put_tt_info()
+ * then the refcount for the structure will go to 0 and we'll free it.
+ *
+ * @hsotg:     The HCD state structure for the DWC OTG controller.
+ * @context:   The priv pointer from a struct dwc2_hcd_urb.
+ * @mem_flags: Flags for allocating memory.
+ * @ttport:    We'll return this device's port number here.  That's used to
+ *             reference into the bitmap if we're on a multi_tt hub.
+ *
+ * Return: a pointer to a struct dwc2_tt.  Don't forget to call
+ *         dwc2_host_put_tt_info()!  Returns NULL upon memory alloc failure.
+ */
+
+struct dwc2_tt *dwc2_host_get_tt_info(struct dwc2_hsotg *hsotg, void *context,
+				      gfp_t mem_flags, int *ttport)
+{
+	struct urb *urb = context;
+	struct dwc2_tt *dwc_tt = NULL;
+
+	if (urb->dev->tt) {
+		*ttport = urb->dev->ttport;
+
+		dwc_tt = urb->dev->tt->hcpriv;
+		if (!dwc_tt) {
+			size_t bitmap_size;
+
+			/*
+			 * For single_tt we need one schedule.  For multi_tt
+			 * we need one per port.
+			 */
+			bitmap_size = DWC2_ELEMENTS_PER_LS_BITMAP *
+				      sizeof(dwc_tt->periodic_bitmaps[0]);
+			if (urb->dev->tt->multi)
+				bitmap_size *= urb->dev->tt->hub->maxchild;
+
+			dwc_tt = kzalloc(sizeof(*dwc_tt) + bitmap_size,
+					 mem_flags);
+			if (!dwc_tt)
+				return NULL;
+
+			dwc_tt->usb_tt = urb->dev->tt;
+			dwc_tt->usb_tt->hcpriv = dwc_tt;
+		}
+
+		dwc_tt->refcount++;
+	}
+
+	return dwc_tt;
+}
+
+/**
+ * dwc2_host_put_tt_info() - Put the dwc2_tt from dwc2_host_get_tt_info()
+ *
+ * Frees resources allocated by dwc2_host_get_tt_info() if all current holders
+ * of the structure are done.
+ *
+ * It's OK to call this with NULL.
+ *
+ * @hsotg:     The HCD state structure for the DWC OTG controller.
+ * @dwc_tt:    The pointer returned by dwc2_host_get_tt_info.
+ */
+void dwc2_host_put_tt_info(struct dwc2_hsotg *hsotg, struct dwc2_tt *dwc_tt)
+{
+	/* Model kfree and make put of NULL a no-op */
+	if (!dwc_tt)
+		return;
+
+	WARN_ON(dwc_tt->refcount < 1);
+
+	dwc_tt->refcount--;
+	if (!dwc_tt->refcount) {
+		dwc_tt->usb_tt->hcpriv = NULL;
+		kfree(dwc_tt);
+	}
+}
+
+int dwc2_host_get_speed(struct dwc2_hsotg *hsotg, void *context)
+{
+	struct urb *urb = context;
+
+	return urb->dev->speed;
+}
+
+static void dwc2_allocate_bus_bandwidth(struct usb_hcd *hcd, u16 bw,
+					struct urb *urb)
+{
+	struct usb_bus *bus = hcd_to_bus(hcd);
+
+	if (urb->interval)
+		bus->bandwidth_allocated += bw / urb->interval;
+	if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS)
+		bus->bandwidth_isoc_reqs++;
+	else
+		bus->bandwidth_int_reqs++;
+}
+
+static void dwc2_free_bus_bandwidth(struct usb_hcd *hcd, u16 bw,
+				    struct urb *urb)
+{
+	struct usb_bus *bus = hcd_to_bus(hcd);
+
+	if (urb->interval)
+		bus->bandwidth_allocated -= bw / urb->interval;
+	if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS)
+		bus->bandwidth_isoc_reqs--;
+	else
+		bus->bandwidth_int_reqs--;
+}
+
+/*
+ * Sets the final status of an URB and returns it to the upper layer. Any
+ * required cleanup of the URB is performed.
+ *
+ * Must be called with interrupt disabled and spinlock held
+ */
+void dwc2_host_complete(struct dwc2_hsotg *hsotg, struct dwc2_qtd *qtd,
+			int status)
+{
+	struct urb *urb;
+	int i;
+
+	if (!qtd) {
+		dev_dbg(hsotg->dev, "## %s: qtd is NULL ##\n", __func__);
+		return;
+	}
+
+	if (!qtd->urb) {
+		dev_dbg(hsotg->dev, "## %s: qtd->urb is NULL ##\n", __func__);
+		return;
+	}
+
+	urb = qtd->urb->priv;
+	if (!urb) {
+		dev_dbg(hsotg->dev, "## %s: urb->priv is NULL ##\n", __func__);
+		return;
+	}
+
+	urb->actual_length = dwc2_hcd_urb_get_actual_length(qtd->urb);
+
+	if (dbg_urb(urb))
+		dev_vdbg(hsotg->dev,
+			 "%s: urb %p device %d ep %d-%s status %d actual %d\n",
+			 __func__, urb, usb_pipedevice(urb->pipe),
+			 usb_pipeendpoint(urb->pipe),
+			 usb_pipein(urb->pipe) ? "IN" : "OUT", status,
+			 urb->actual_length);
+
+	if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
+		urb->error_count = dwc2_hcd_urb_get_error_count(qtd->urb);
+		for (i = 0; i < urb->number_of_packets; ++i) {
+			urb->iso_frame_desc[i].actual_length =
+				dwc2_hcd_urb_get_iso_desc_actual_length(
+						qtd->urb, i);
+			urb->iso_frame_desc[i].status =
+				dwc2_hcd_urb_get_iso_desc_status(qtd->urb, i);
+		}
+	}
+
+	if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS && dbg_perio()) {
+		for (i = 0; i < urb->number_of_packets; i++)
+			dev_vdbg(hsotg->dev, " ISO Desc %d status %d\n",
+				 i, urb->iso_frame_desc[i].status);
+	}
+
+	urb->status = status;
+	if (!status) {
+		if ((urb->transfer_flags & URB_SHORT_NOT_OK) &&
+		    urb->actual_length < urb->transfer_buffer_length)
+			urb->status = -EREMOTEIO;
+	}
+
+	if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS ||
+	    usb_pipetype(urb->pipe) == PIPE_INTERRUPT) {
+		struct usb_host_endpoint *ep = urb->ep;
+
+		if (ep)
+			dwc2_free_bus_bandwidth(dwc2_hsotg_to_hcd(hsotg),
+					dwc2_hcd_get_ep_bandwidth(hsotg, ep),
+					urb);
+	}
+
+	usb_hcd_unlink_urb_from_ep(dwc2_hsotg_to_hcd(hsotg), urb);
+	urb->hcpriv = NULL;
+	kfree(qtd->urb);
+	qtd->urb = NULL;
+
+	usb_hcd_giveback_urb(dwc2_hsotg_to_hcd(hsotg), urb, status);
+}
+
+/*
+ * Work queue function for starting the HCD when A-Cable is connected
+ */
+static void dwc2_hcd_start_func(struct work_struct *work)
+{
+	struct dwc2_hsotg *hsotg = container_of(work, struct dwc2_hsotg,
+						start_work.work);
+
+	dev_dbg(hsotg->dev, "%s() %p\n", __func__, hsotg);
+	dwc2_host_start(hsotg);
+}
+
+/*
+ * Reset work queue function
+ */
+static void dwc2_hcd_reset_func(struct work_struct *work)
+{
+	struct dwc2_hsotg *hsotg = container_of(work, struct dwc2_hsotg,
+						reset_work.work);
+	unsigned long flags;
+	u32 hprt0;
+
+	dev_dbg(hsotg->dev, "USB RESET function called\n");
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+
+	hprt0 = dwc2_read_hprt0(hsotg);
+	hprt0 &= ~HPRT0_RST;
+	dwc2_writel(hsotg, hprt0, HPRT0);
+	hsotg->flags.b.port_reset_change = 1;
+
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+}
+
+static void dwc2_hcd_phy_reset_func(struct work_struct *work)
+{
+	struct dwc2_hsotg *hsotg = container_of(work, struct dwc2_hsotg,
+						phy_reset_work);
+	int ret;
+
+	ret = phy_reset(hsotg->phy);
+	if (ret)
+		dev_warn(hsotg->dev, "PHY reset failed\n");
+}
+
+/*
+ * =========================================================================
+ *  Linux HC Driver Functions
+ * =========================================================================
+ */
+
+/*
+ * Initializes the DWC_otg controller and its root hub and prepares it for host
+ * mode operation. Activates the root port. Returns 0 on success and a negative
+ * error code on failure.
+ */
+static int _dwc2_hcd_start(struct usb_hcd *hcd)
+{
+	struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
+	struct usb_bus *bus = hcd_to_bus(hcd);
+	unsigned long flags;
+	u32 hprt0;
+	int ret;
+
+	dev_dbg(hsotg->dev, "DWC OTG HCD START\n");
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+	hsotg->lx_state = DWC2_L0;
+	hcd->state = HC_STATE_RUNNING;
+	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+
+	if (dwc2_is_device_mode(hsotg)) {
+		spin_unlock_irqrestore(&hsotg->lock, flags);
+		return 0;	/* why 0 ?? */
+	}
+
+	dwc2_hcd_reinit(hsotg);
+
+	hprt0 = dwc2_read_hprt0(hsotg);
+	/* Has vbus power been turned on in dwc2_core_host_init ? */
+	if (hprt0 & HPRT0_PWR) {
+		/* Enable external vbus supply before resuming root hub */
+		spin_unlock_irqrestore(&hsotg->lock, flags);
+		ret = dwc2_vbus_supply_init(hsotg);
+		if (ret)
+			return ret;
+		spin_lock_irqsave(&hsotg->lock, flags);
+	}
+
+	/* Initialize and connect root hub if one is not already attached */
+	if (bus->root_hub) {
+		dev_dbg(hsotg->dev, "DWC OTG HCD Has Root Hub\n");
+		/* Inform the HUB driver to resume */
+		usb_hcd_resume_root_hub(hcd);
+	}
+
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+
+	return 0;
+}
+
+/*
+ * Halts the DWC_otg host mode operations in a clean manner. USB transfers are
+ * stopped.
+ */
+static void _dwc2_hcd_stop(struct usb_hcd *hcd)
+{
+	struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
+	unsigned long flags;
+	u32 hprt0;
+
+	/* Turn off all host-specific interrupts */
+	dwc2_disable_host_interrupts(hsotg);
+
+	/* Wait for interrupt processing to finish */
+	synchronize_irq(hcd->irq);
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+	hprt0 = dwc2_read_hprt0(hsotg);
+	/* Ensure hcd is disconnected */
+	dwc2_hcd_disconnect(hsotg, true);
+	dwc2_hcd_stop(hsotg);
+	hsotg->lx_state = DWC2_L3;
+	hcd->state = HC_STATE_HALT;
+	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+
+	/* keep balanced supply init/exit by checking HPRT0_PWR */
+	if (hprt0 & HPRT0_PWR)
+		dwc2_vbus_supply_exit(hsotg);
+
+	usleep_range(1000, 3000);
+}
+
+static int _dwc2_hcd_suspend(struct usb_hcd *hcd)
+{
+	struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
+	unsigned long flags;
+	int ret = 0;
+	u32 hprt0;
+	u32 pcgctl;
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+
+	if (dwc2_is_device_mode(hsotg))
+		goto unlock;
+
+	if (hsotg->lx_state != DWC2_L0)
+		goto unlock;
+
+	if (!HCD_HW_ACCESSIBLE(hcd))
+		goto unlock;
+
+	if (hsotg->op_state == OTG_STATE_B_PERIPHERAL)
+		goto unlock;
+
+	if (hsotg->params.power_down != DWC2_POWER_DOWN_PARAM_PARTIAL ||
+	    hsotg->flags.b.port_connect_status == 0)
+		goto skip_power_saving;
+
+	/*
+	 * Drive USB suspend and disable port Power
+	 * if usb bus is not suspended.
+	 */
+	if (!hsotg->bus_suspended) {
+		hprt0 = dwc2_read_hprt0(hsotg);
+		if (hprt0 & HPRT0_CONNSTS) {
+			hprt0 |= HPRT0_SUSP;
+			if (hsotg->params.power_down == DWC2_POWER_DOWN_PARAM_PARTIAL)
+				hprt0 &= ~HPRT0_PWR;
+			dwc2_writel(hsotg, hprt0, HPRT0);
+		}
+		if (hsotg->params.power_down == DWC2_POWER_DOWN_PARAM_PARTIAL) {
+			spin_unlock_irqrestore(&hsotg->lock, flags);
+			dwc2_vbus_supply_exit(hsotg);
+			spin_lock_irqsave(&hsotg->lock, flags);
+		} else {
+			pcgctl = readl(hsotg->regs + PCGCTL);
+			pcgctl |= PCGCTL_STOPPCLK;
+			writel(pcgctl, hsotg->regs + PCGCTL);
+		}
+	}
+
+	if (hsotg->params.power_down == DWC2_POWER_DOWN_PARAM_PARTIAL) {
+		/* Enter partial_power_down */
+		ret = dwc2_enter_partial_power_down(hsotg);
+		if (ret) {
+			if (ret != -ENOTSUPP)
+				dev_err(hsotg->dev,
+					"enter partial_power_down failed\n");
+			goto skip_power_saving;
+		}
+
+		/* After entering partial_power_down, hardware is no more accessible */
+		clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+	}
+
+	/* Ask phy to be suspended */
+	if (!IS_ERR_OR_NULL(hsotg->uphy)) {
+		spin_unlock_irqrestore(&hsotg->lock, flags);
+		usb_phy_set_suspend(hsotg->uphy, true);
+		spin_lock_irqsave(&hsotg->lock, flags);
+	}
+
+skip_power_saving:
+	hsotg->lx_state = DWC2_L2;
+unlock:
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+
+	return ret;
+}
+
+static int _dwc2_hcd_resume(struct usb_hcd *hcd)
+{
+	struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
+	unsigned long flags;
+	u32 pcgctl;
+	int ret = 0;
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+
+	if (dwc2_is_device_mode(hsotg))
+		goto unlock;
+
+	if (hsotg->lx_state != DWC2_L2)
+		goto unlock;
+
+	if (hsotg->params.power_down > DWC2_POWER_DOWN_PARAM_PARTIAL) {
+		hsotg->lx_state = DWC2_L0;
+		goto unlock;
+	}
+
+	/*
+	 * Enable power if not already done.
+	 * This must not be spinlocked since duration
+	 * of this call is unknown.
+	 */
+	if (!IS_ERR_OR_NULL(hsotg->uphy)) {
+		spin_unlock_irqrestore(&hsotg->lock, flags);
+		usb_phy_set_suspend(hsotg->uphy, false);
+		spin_lock_irqsave(&hsotg->lock, flags);
+	}
+
+	if (hsotg->params.power_down == DWC2_POWER_DOWN_PARAM_PARTIAL) {
+		/*
+		 * Set HW accessible bit before powering on the controller
+		 * since an interrupt may rise.
+		 */
+		set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+
+
+		/* Exit partial_power_down */
+		ret = dwc2_exit_partial_power_down(hsotg, true);
+		if (ret && (ret != -ENOTSUPP))
+			dev_err(hsotg->dev, "exit partial_power_down failed\n");
+	} else {
+		pcgctl = readl(hsotg->regs + PCGCTL);
+		pcgctl &= ~PCGCTL_STOPPCLK;
+		writel(pcgctl, hsotg->regs + PCGCTL);
+	}
+
+	hsotg->lx_state = DWC2_L0;
+
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+
+	if (hsotg->bus_suspended) {
+		spin_lock_irqsave(&hsotg->lock, flags);
+		hsotg->flags.b.port_suspend_change = 1;
+		spin_unlock_irqrestore(&hsotg->lock, flags);
+		dwc2_port_resume(hsotg);
+	} else {
+		if (hsotg->params.power_down == DWC2_POWER_DOWN_PARAM_PARTIAL) {
+			dwc2_vbus_supply_init(hsotg);
+
+			/* Wait for controller to correctly update D+/D- level */
+			usleep_range(3000, 5000);
+		}
+
+		/*
+		 * Clear Port Enable and Port Status changes.
+		 * Enable Port Power.
+		 */
+		dwc2_writel(hsotg, HPRT0_PWR | HPRT0_CONNDET |
+				HPRT0_ENACHG, HPRT0);
+		/* Wait for controller to detect Port Connect */
+		usleep_range(5000, 7000);
+	}
+
+	return ret;
+unlock:
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+
+	return ret;
+}
+
+/* Returns the current frame number */
+static int _dwc2_hcd_get_frame_number(struct usb_hcd *hcd)
+{
+	struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
+
+	return dwc2_hcd_get_frame_number(hsotg);
+}
+
+static void dwc2_dump_urb_info(struct usb_hcd *hcd, struct urb *urb,
+			       char *fn_name)
+{
+#ifdef VERBOSE_DEBUG
+	struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
+	char *pipetype = NULL;
+	char *speed = NULL;
+
+	dev_vdbg(hsotg->dev, "%s, urb %p\n", fn_name, urb);
+	dev_vdbg(hsotg->dev, "  Device address: %d\n",
+		 usb_pipedevice(urb->pipe));
+	dev_vdbg(hsotg->dev, "  Endpoint: %d, %s\n",
+		 usb_pipeendpoint(urb->pipe),
+		 usb_pipein(urb->pipe) ? "IN" : "OUT");
+
+	switch (usb_pipetype(urb->pipe)) {
+	case PIPE_CONTROL:
+		pipetype = "CONTROL";
+		break;
+	case PIPE_BULK:
+		pipetype = "BULK";
+		break;
+	case PIPE_INTERRUPT:
+		pipetype = "INTERRUPT";
+		break;
+	case PIPE_ISOCHRONOUS:
+		pipetype = "ISOCHRONOUS";
+		break;
+	}
+
+	dev_vdbg(hsotg->dev, "  Endpoint type: %s %s (%s)\n", pipetype,
+		 usb_urb_dir_in(urb) ? "IN" : "OUT", usb_pipein(urb->pipe) ?
+		 "IN" : "OUT");
+
+	switch (urb->dev->speed) {
+	case USB_SPEED_HIGH:
+		speed = "HIGH";
+		break;
+	case USB_SPEED_FULL:
+		speed = "FULL";
+		break;
+	case USB_SPEED_LOW:
+		speed = "LOW";
+		break;
+	default:
+		speed = "UNKNOWN";
+		break;
+	}
+
+	dev_vdbg(hsotg->dev, "  Speed: %s\n", speed);
+	dev_vdbg(hsotg->dev, "  Max packet size: %d (%d mult)\n",
+		 usb_endpoint_maxp(&urb->ep->desc),
+		 usb_endpoint_maxp_mult(&urb->ep->desc));
+
+	dev_vdbg(hsotg->dev, "  Data buffer length: %d\n",
+		 urb->transfer_buffer_length);
+	dev_vdbg(hsotg->dev, "  Transfer buffer: %p, Transfer DMA: %08lx\n",
+		 urb->transfer_buffer, (unsigned long)urb->transfer_dma);
+	dev_vdbg(hsotg->dev, "  Setup buffer: %p, Setup DMA: %08lx\n",
+		 urb->setup_packet, (unsigned long)urb->setup_dma);
+	dev_vdbg(hsotg->dev, "  Interval: %d\n", urb->interval);
+
+	if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
+		int i;
+
+		for (i = 0; i < urb->number_of_packets; i++) {
+			dev_vdbg(hsotg->dev, "  ISO Desc %d:\n", i);
+			dev_vdbg(hsotg->dev, "    offset: %d, length %d\n",
+				 urb->iso_frame_desc[i].offset,
+				 urb->iso_frame_desc[i].length);
+		}
+	}
+#endif
+}
+
+/*
+ * Starts processing a USB transfer request specified by a USB Request Block
+ * (URB). mem_flags indicates the type of memory allocation to use while
+ * processing this URB.
+ */
+static int _dwc2_hcd_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
+				 gfp_t mem_flags)
+{
+	struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
+	struct usb_host_endpoint *ep = urb->ep;
+	struct dwc2_hcd_urb *dwc2_urb;
+	int i;
+	int retval;
+	int alloc_bandwidth = 0;
+	u8 ep_type = 0;
+	u32 tflags = 0;
+	void *buf;
+	unsigned long flags;
+	struct dwc2_qh *qh;
+	bool qh_allocated = false;
+	struct dwc2_qtd *qtd;
+
+	if (dbg_urb(urb)) {
+		dev_vdbg(hsotg->dev, "DWC OTG HCD URB Enqueue\n");
+		dwc2_dump_urb_info(hcd, urb, "urb_enqueue");
+	}
+
+	if (!ep)
+		return -EINVAL;
+
+	if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS ||
+	    usb_pipetype(urb->pipe) == PIPE_INTERRUPT) {
+		spin_lock_irqsave(&hsotg->lock, flags);
+		if (!dwc2_hcd_is_bandwidth_allocated(hsotg, ep))
+			alloc_bandwidth = 1;
+		spin_unlock_irqrestore(&hsotg->lock, flags);
+	}
+
+	switch (usb_pipetype(urb->pipe)) {
+	case PIPE_CONTROL:
+		ep_type = USB_ENDPOINT_XFER_CONTROL;
+		break;
+	case PIPE_ISOCHRONOUS:
+		ep_type = USB_ENDPOINT_XFER_ISOC;
+		break;
+	case PIPE_BULK:
+		ep_type = USB_ENDPOINT_XFER_BULK;
+		break;
+	case PIPE_INTERRUPT:
+		ep_type = USB_ENDPOINT_XFER_INT;
+		break;
+	}
+
+	dwc2_urb = dwc2_hcd_urb_alloc(hsotg, urb->number_of_packets,
+				      mem_flags);
+	if (!dwc2_urb)
+		return -ENOMEM;
+
+	dwc2_hcd_urb_set_pipeinfo(hsotg, dwc2_urb, usb_pipedevice(urb->pipe),
+				  usb_pipeendpoint(urb->pipe), ep_type,
+				  usb_pipein(urb->pipe),
+				  usb_endpoint_maxp(&ep->desc),
+				  usb_endpoint_maxp_mult(&ep->desc));
+
+	buf = urb->transfer_buffer;
+
+	if (hcd_uses_dma(hcd)) {
+		if (!buf && (urb->transfer_dma & 3)) {
+			dev_err(hsotg->dev,
+				"%s: unaligned transfer with no transfer_buffer",
+				__func__);
+			retval = -EINVAL;
+			goto fail0;
+		}
+	}
+
+	if (!(urb->transfer_flags & URB_NO_INTERRUPT))
+		tflags |= URB_GIVEBACK_ASAP;
+	if (urb->transfer_flags & URB_ZERO_PACKET)
+		tflags |= URB_SEND_ZERO_PACKET;
+
+	dwc2_urb->priv = urb;
+	dwc2_urb->buf = buf;
+	dwc2_urb->dma = urb->transfer_dma;
+	dwc2_urb->length = urb->transfer_buffer_length;
+	dwc2_urb->setup_packet = urb->setup_packet;
+	dwc2_urb->setup_dma = urb->setup_dma;
+	dwc2_urb->flags = tflags;
+	dwc2_urb->interval = urb->interval;
+	dwc2_urb->status = -EINPROGRESS;
+
+	for (i = 0; i < urb->number_of_packets; ++i)
+		dwc2_hcd_urb_set_iso_desc_params(dwc2_urb, i,
+						 urb->iso_frame_desc[i].offset,
+						 urb->iso_frame_desc[i].length);
+
+	urb->hcpriv = dwc2_urb;
+	qh = (struct dwc2_qh *)ep->hcpriv;
+	/* Create QH for the endpoint if it doesn't exist */
+	if (!qh) {
+		qh = dwc2_hcd_qh_create(hsotg, dwc2_urb, mem_flags);
+		if (!qh) {
+			retval = -ENOMEM;
+			goto fail0;
+		}
+		ep->hcpriv = qh;
+		qh_allocated = true;
+	}
+
+	qtd = kzalloc(sizeof(*qtd), mem_flags);
+	if (!qtd) {
+		retval = -ENOMEM;
+		goto fail1;
+	}
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+	retval = usb_hcd_link_urb_to_ep(hcd, urb);
+	if (retval)
+		goto fail2;
+
+	retval = dwc2_hcd_urb_enqueue(hsotg, dwc2_urb, qh, qtd);
+	if (retval)
+		goto fail3;
+
+	if (alloc_bandwidth) {
+		dwc2_allocate_bus_bandwidth(hcd,
+				dwc2_hcd_get_ep_bandwidth(hsotg, ep),
+				urb);
+	}
+
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+
+	return 0;
+
+fail3:
+	dwc2_urb->priv = NULL;
+	usb_hcd_unlink_urb_from_ep(hcd, urb);
+	if (qh_allocated && qh->channel && qh->channel->qh == qh)
+		qh->channel->qh = NULL;
+fail2:
+	urb->hcpriv = NULL;
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+	kfree(qtd);
+fail1:
+	if (qh_allocated) {
+		struct dwc2_qtd *qtd2, *qtd2_tmp;
+
+		ep->hcpriv = NULL;
+		dwc2_hcd_qh_unlink(hsotg, qh);
+		/* Free each QTD in the QH's QTD list */
+		list_for_each_entry_safe(qtd2, qtd2_tmp, &qh->qtd_list,
+					 qtd_list_entry)
+			dwc2_hcd_qtd_unlink_and_free(hsotg, qtd2, qh);
+		dwc2_hcd_qh_free(hsotg, qh);
+	}
+fail0:
+	kfree(dwc2_urb);
+
+	return retval;
+}
+
+/*
+ * Aborts/cancels a USB transfer request. Always returns 0 to indicate success.
+ */
+static int _dwc2_hcd_urb_dequeue(struct usb_hcd *hcd, struct urb *urb,
+				 int status)
+{
+	struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
+	int rc;
+	unsigned long flags;
+
+	dev_dbg(hsotg->dev, "DWC OTG HCD URB Dequeue\n");
+	dwc2_dump_urb_info(hcd, urb, "urb_dequeue");
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+
+	rc = usb_hcd_check_unlink_urb(hcd, urb, status);
+	if (rc)
+		goto out;
+
+	if (!urb->hcpriv) {
+		dev_dbg(hsotg->dev, "## urb->hcpriv is NULL ##\n");
+		goto out;
+	}
+
+	rc = dwc2_hcd_urb_dequeue(hsotg, urb->hcpriv);
+
+	usb_hcd_unlink_urb_from_ep(hcd, urb);
+
+	kfree(urb->hcpriv);
+	urb->hcpriv = NULL;
+
+	/* Higher layer software sets URB status */
+	spin_unlock(&hsotg->lock);
+	usb_hcd_giveback_urb(hcd, urb, status);
+	spin_lock(&hsotg->lock);
+
+	dev_dbg(hsotg->dev, "Called usb_hcd_giveback_urb()\n");
+	dev_dbg(hsotg->dev, "  urb->status = %d\n", urb->status);
+out:
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+
+	return rc;
+}
+
+/*
+ * Frees resources in the DWC_otg controller related to a given endpoint. Also
+ * clears state in the HCD related to the endpoint. Any URBs for the endpoint
+ * must already be dequeued.
+ */
+static void _dwc2_hcd_endpoint_disable(struct usb_hcd *hcd,
+				       struct usb_host_endpoint *ep)
+{
+	struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
+
+	dev_dbg(hsotg->dev,
+		"DWC OTG HCD EP DISABLE: bEndpointAddress=0x%02x, ep->hcpriv=%p\n",
+		ep->desc.bEndpointAddress, ep->hcpriv);
+	dwc2_hcd_endpoint_disable(hsotg, ep, 250);
+}
+
+/*
+ * Resets endpoint specific parameter values, in current version used to reset
+ * the data toggle (as a WA). This function can be called from usb_clear_halt
+ * routine.
+ */
+static void _dwc2_hcd_endpoint_reset(struct usb_hcd *hcd,
+				     struct usb_host_endpoint *ep)
+{
+	struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
+	unsigned long flags;
+
+	dev_dbg(hsotg->dev,
+		"DWC OTG HCD EP RESET: bEndpointAddress=0x%02x\n",
+		ep->desc.bEndpointAddress);
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+	dwc2_hcd_endpoint_reset(hsotg, ep);
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+}
+
+/*
+ * Handles host mode interrupts for the DWC_otg controller. Returns IRQ_NONE if
+ * there was no interrupt to handle. Returns IRQ_HANDLED if there was a valid
+ * interrupt.
+ *
+ * This function is called by the USB core when an interrupt occurs
+ */
+static irqreturn_t _dwc2_hcd_irq(struct usb_hcd *hcd)
+{
+	struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
+
+	return dwc2_handle_hcd_intr(hsotg);
+}
+
+/*
+ * Creates Status Change bitmap for the root hub and root port. The bitmap is
+ * returned in buf. Bit 0 is the status change indicator for the root hub. Bit 1
+ * is the status change indicator for the single root port. Returns 1 if either
+ * change indicator is 1, otherwise returns 0.
+ */
+static int _dwc2_hcd_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+	struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
+
+	buf[0] = dwc2_hcd_is_status_changed(hsotg, 1) << 1;
+	return buf[0] != 0;
+}
+
+/* Handles hub class-specific requests */
+static int _dwc2_hcd_hub_control(struct usb_hcd *hcd, u16 typereq, u16 wvalue,
+				 u16 windex, char *buf, u16 wlength)
+{
+	int retval = dwc2_hcd_hub_control(dwc2_hcd_to_hsotg(hcd), typereq,
+					  wvalue, windex, buf, wlength);
+	return retval;
+}
+
+/* Handles hub TT buffer clear completions */
+static void _dwc2_hcd_clear_tt_buffer_complete(struct usb_hcd *hcd,
+					       struct usb_host_endpoint *ep)
+{
+	struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
+	struct dwc2_qh *qh;
+	unsigned long flags;
+
+	qh = ep->hcpriv;
+	if (!qh)
+		return;
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+	qh->tt_buffer_dirty = 0;
+
+	if (hsotg->flags.b.port_connect_status)
+		dwc2_hcd_queue_transactions(hsotg, DWC2_TRANSACTION_ALL);
+
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+}
+
+/*
+ * HPRT0_SPD_HIGH_SPEED: high speed
+ * HPRT0_SPD_FULL_SPEED: full speed
+ */
+static void dwc2_change_bus_speed(struct usb_hcd *hcd, int speed)
+{
+	struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
+
+	if (hsotg->params.speed == speed)
+		return;
+
+	hsotg->params.speed = speed;
+	queue_work(hsotg->wq_otg, &hsotg->wf_otg);
+}
+
+static void dwc2_free_dev(struct usb_hcd *hcd, struct usb_device *udev)
+{
+	struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
+
+	if (!hsotg->params.change_speed_quirk)
+		return;
+
+	/*
+	 * On removal, set speed to default high-speed.
+	 */
+	if (udev->parent && udev->parent->speed > USB_SPEED_UNKNOWN &&
+	    udev->parent->speed < USB_SPEED_HIGH) {
+		dev_info(hsotg->dev, "Set speed to default high-speed\n");
+		dwc2_change_bus_speed(hcd, HPRT0_SPD_HIGH_SPEED);
+	}
+}
+
+static int dwc2_reset_device(struct usb_hcd *hcd, struct usb_device *udev)
+{
+	struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
+
+	if (!hsotg->params.change_speed_quirk)
+		return 0;
+
+	if (udev->speed == USB_SPEED_HIGH) {
+		dev_info(hsotg->dev, "Set speed to high-speed\n");
+		dwc2_change_bus_speed(hcd, HPRT0_SPD_HIGH_SPEED);
+	} else if ((udev->speed == USB_SPEED_FULL ||
+				udev->speed == USB_SPEED_LOW)) {
+		/*
+		 * Change speed setting to full-speed if there's
+		 * a full-speed or low-speed device plugged in.
+		 */
+		dev_info(hsotg->dev, "Set speed to full-speed\n");
+		dwc2_change_bus_speed(hcd, HPRT0_SPD_FULL_SPEED);
+	}
+
+	return 0;
+}
+
+static struct hc_driver dwc2_hc_driver = {
+	.description = "dwc2_hsotg",
+	.product_desc = "DWC OTG Controller",
+	.hcd_priv_size = sizeof(struct wrapper_priv_data),
+
+	.irq = _dwc2_hcd_irq,
+	.flags = HCD_MEMORY | HCD_USB2 | HCD_BH,
+
+	.start = _dwc2_hcd_start,
+	.stop = _dwc2_hcd_stop,
+	.urb_enqueue = _dwc2_hcd_urb_enqueue,
+	.urb_dequeue = _dwc2_hcd_urb_dequeue,
+	.endpoint_disable = _dwc2_hcd_endpoint_disable,
+	.endpoint_reset = _dwc2_hcd_endpoint_reset,
+	.get_frame_number = _dwc2_hcd_get_frame_number,
+
+	.hub_status_data = _dwc2_hcd_hub_status_data,
+	.hub_control = _dwc2_hcd_hub_control,
+	.clear_tt_buffer_complete = _dwc2_hcd_clear_tt_buffer_complete,
+
+	.bus_suspend = _dwc2_hcd_suspend,
+	.bus_resume = _dwc2_hcd_resume,
+
+	.map_urb_for_dma	= dwc2_map_urb_for_dma,
+	.unmap_urb_for_dma	= dwc2_unmap_urb_for_dma,
+};
+
+/*
+ * Frees secondary storage associated with the dwc2_hsotg structure contained
+ * in the struct usb_hcd field
+ */
+static void dwc2_hcd_free(struct dwc2_hsotg *hsotg)
+{
+	u32 ahbcfg;
+	u32 dctl;
+	int i;
+
+	dev_dbg(hsotg->dev, "DWC OTG HCD FREE\n");
+
+	/* Free memory for QH/QTD lists */
+	dwc2_qh_list_free(hsotg, &hsotg->non_periodic_sched_inactive);
+	dwc2_qh_list_free(hsotg, &hsotg->non_periodic_sched_waiting);
+	dwc2_qh_list_free(hsotg, &hsotg->non_periodic_sched_active);
+	dwc2_qh_list_free(hsotg, &hsotg->periodic_sched_inactive);
+	dwc2_qh_list_free(hsotg, &hsotg->periodic_sched_ready);
+	dwc2_qh_list_free(hsotg, &hsotg->periodic_sched_assigned);
+	dwc2_qh_list_free(hsotg, &hsotg->periodic_sched_queued);
+
+	/* Free memory for the host channels */
+	for (i = 0; i < MAX_EPS_CHANNELS; i++) {
+		struct dwc2_host_chan *chan = hsotg->hc_ptr_array[i];
+
+		if (chan) {
+			dev_dbg(hsotg->dev, "HCD Free channel #%i, chan=%p\n",
+				i, chan);
+			hsotg->hc_ptr_array[i] = NULL;
+			kfree(chan);
+		}
+	}
+
+	if (hsotg->params.host_dma) {
+		if (hsotg->status_buf) {
+			dma_free_coherent(hsotg->dev, DWC2_HCD_STATUS_BUF_SIZE,
+					  hsotg->status_buf,
+					  hsotg->status_buf_dma);
+			hsotg->status_buf = NULL;
+		}
+	} else {
+		kfree(hsotg->status_buf);
+		hsotg->status_buf = NULL;
+	}
+
+	ahbcfg = dwc2_readl(hsotg, GAHBCFG);
+
+	/* Disable all interrupts */
+	ahbcfg &= ~GAHBCFG_GLBL_INTR_EN;
+	dwc2_writel(hsotg, ahbcfg, GAHBCFG);
+	dwc2_writel(hsotg, 0, GINTMSK);
+
+	if (hsotg->hw_params.snpsid >= DWC2_CORE_REV_3_00a) {
+		dctl = dwc2_readl(hsotg, DCTL);
+		dctl |= DCTL_SFTDISCON;
+		dwc2_writel(hsotg, dctl, DCTL);
+	}
+
+	if (hsotg->wq_otg) {
+		if (!cancel_work_sync(&hsotg->wf_otg))
+			flush_workqueue(hsotg->wq_otg);
+		destroy_workqueue(hsotg->wq_otg);
+	}
+
+	cancel_work_sync(&hsotg->phy_reset_work);
+
+	del_timer(&hsotg->wkp_timer);
+}
+
+static void dwc2_hcd_release(struct dwc2_hsotg *hsotg)
+{
+	/* Turn off all host-specific interrupts */
+	dwc2_disable_host_interrupts(hsotg);
+
+	dwc2_hcd_free(hsotg);
+}
+
+/*
+ * Initializes the HCD. This function allocates memory for and initializes the
+ * static parts of the usb_hcd and dwc2_hsotg structures. It also registers the
+ * USB bus with the core and calls the hc_driver->start() function. It returns
+ * a negative error on failure.
+ */
+int dwc2_hcd_init(struct dwc2_hsotg *hsotg)
+{
+	struct platform_device *pdev = to_platform_device(hsotg->dev);
+	struct resource *res;
+	struct usb_hcd *hcd;
+	struct dwc2_host_chan *channel;
+	u32 hcfg;
+	int i, num_channels;
+	int retval;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	dev_dbg(hsotg->dev, "DWC OTG HCD INIT\n");
+
+	retval = -ENOMEM;
+
+	hcfg = dwc2_readl(hsotg, HCFG);
+	dev_dbg(hsotg->dev, "hcfg=%08x\n", hcfg);
+
+#ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS
+	hsotg->frame_num_array = kcalloc(FRAME_NUM_ARRAY_SIZE,
+					 sizeof(*hsotg->frame_num_array),
+					 GFP_KERNEL);
+	if (!hsotg->frame_num_array)
+		goto error1;
+	hsotg->last_frame_num_array =
+		kcalloc(FRAME_NUM_ARRAY_SIZE,
+			sizeof(*hsotg->last_frame_num_array), GFP_KERNEL);
+	if (!hsotg->last_frame_num_array)
+		goto error1;
+#endif
+	hsotg->last_frame_num = HFNUM_MAX_FRNUM;
+
+	/* Check if the bus driver or platform code has setup a dma_mask */
+	if (hsotg->params.host_dma &&
+	    !hsotg->dev->dma_mask) {
+		dev_warn(hsotg->dev,
+			 "dma_mask not set, disabling DMA\n");
+		hsotg->params.host_dma = false;
+		hsotg->params.dma_desc_enable = false;
+	}
+
+	/* Set device flags indicating whether the HCD supports DMA */
+	if (hsotg->params.host_dma) {
+		if (dma_set_mask(hsotg->dev, DMA_BIT_MASK(32)) < 0)
+			dev_warn(hsotg->dev, "can't set DMA mask\n");
+		if (dma_set_coherent_mask(hsotg->dev, DMA_BIT_MASK(32)) < 0)
+			dev_warn(hsotg->dev, "can't set coherent DMA mask\n");
+	}
+
+	if (hsotg->params.change_speed_quirk) {
+		dwc2_hc_driver.free_dev = dwc2_free_dev;
+		dwc2_hc_driver.reset_device = dwc2_reset_device;
+	}
+
+	if (hsotg->params.host_dma)
+		dwc2_hc_driver.flags |= HCD_DMA;
+
+	hcd = usb_create_hcd(&dwc2_hc_driver, hsotg->dev, dev_name(hsotg->dev));
+	if (!hcd)
+		goto error1;
+
+	hcd->has_tt = 1;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		retval = -EINVAL;
+		goto error2;
+	}
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = resource_size(res);
+
+	((struct wrapper_priv_data *)&hcd->hcd_priv)->hsotg = hsotg;
+	hsotg->priv = hcd;
+
+	/*
+	 * Disable the global interrupt until all the interrupt handlers are
+	 * installed
+	 */
+	dwc2_disable_global_interrupts(hsotg);
+
+	/* Initialize the DWC_otg core, and select the Phy type */
+	retval = dwc2_core_init(hsotg, true);
+	if (retval)
+		goto error2;
+
+	/* Create new workqueue and init work */
+	retval = -ENOMEM;
+	hsotg->wq_otg = alloc_ordered_workqueue("dwc2", 0);
+	if (!hsotg->wq_otg) {
+		dev_err(hsotg->dev, "Failed to create workqueue\n");
+		goto error2;
+	}
+	INIT_WORK(&hsotg->wf_otg, dwc2_conn_id_status_change);
+
+	timer_setup(&hsotg->wkp_timer, dwc2_wakeup_detected, 0);
+
+	/* Initialize the non-periodic schedule */
+	INIT_LIST_HEAD(&hsotg->non_periodic_sched_inactive);
+	INIT_LIST_HEAD(&hsotg->non_periodic_sched_waiting);
+	INIT_LIST_HEAD(&hsotg->non_periodic_sched_active);
+
+	/* Initialize the periodic schedule */
+	INIT_LIST_HEAD(&hsotg->periodic_sched_inactive);
+	INIT_LIST_HEAD(&hsotg->periodic_sched_ready);
+	INIT_LIST_HEAD(&hsotg->periodic_sched_assigned);
+	INIT_LIST_HEAD(&hsotg->periodic_sched_queued);
+
+	INIT_LIST_HEAD(&hsotg->split_order);
+
+	/*
+	 * Create a host channel descriptor for each host channel implemented
+	 * in the controller. Initialize the channel descriptor array.
+	 */
+	INIT_LIST_HEAD(&hsotg->free_hc_list);
+	num_channels = hsotg->params.host_channels;
+	memset(&hsotg->hc_ptr_array[0], 0, sizeof(hsotg->hc_ptr_array));
+
+	for (i = 0; i < num_channels; i++) {
+		channel = kzalloc(sizeof(*channel), GFP_KERNEL);
+		if (!channel)
+			goto error3;
+		channel->hc_num = i;
+		INIT_LIST_HEAD(&channel->split_order_list_entry);
+		hsotg->hc_ptr_array[i] = channel;
+	}
+
+	/* Initialize work */
+	INIT_DELAYED_WORK(&hsotg->start_work, dwc2_hcd_start_func);
+	INIT_DELAYED_WORK(&hsotg->reset_work, dwc2_hcd_reset_func);
+	INIT_WORK(&hsotg->phy_reset_work, dwc2_hcd_phy_reset_func);
+
+	/*
+	 * Allocate space for storing data on status transactions. Normally no
+	 * data is sent, but this space acts as a bit bucket. This must be
+	 * done after usb_add_hcd since that function allocates the DMA buffer
+	 * pool.
+	 */
+	if (hsotg->params.host_dma)
+		hsotg->status_buf = dma_alloc_coherent(hsotg->dev,
+					DWC2_HCD_STATUS_BUF_SIZE,
+					&hsotg->status_buf_dma, GFP_KERNEL);
+	else
+		hsotg->status_buf = kzalloc(DWC2_HCD_STATUS_BUF_SIZE,
+					  GFP_KERNEL);
+
+	if (!hsotg->status_buf)
+		goto error3;
+
+	/*
+	 * Create kmem caches to handle descriptor buffers in descriptor
+	 * DMA mode.
+	 * Alignment must be set to 512 bytes.
+	 */
+	if (hsotg->params.dma_desc_enable ||
+	    hsotg->params.dma_desc_fs_enable) {
+		hsotg->desc_gen_cache = kmem_cache_create("dwc2-gen-desc",
+				sizeof(struct dwc2_dma_desc) *
+				MAX_DMA_DESC_NUM_GENERIC, 512, SLAB_CACHE_DMA,
+				NULL);
+		if (!hsotg->desc_gen_cache) {
+			dev_err(hsotg->dev,
+				"unable to create dwc2 generic desc cache\n");
+
+			/*
+			 * Disable descriptor dma mode since it will not be
+			 * usable.
+			 */
+			hsotg->params.dma_desc_enable = false;
+			hsotg->params.dma_desc_fs_enable = false;
+		}
+
+		hsotg->desc_hsisoc_cache = kmem_cache_create("dwc2-hsisoc-desc",
+				sizeof(struct dwc2_dma_desc) *
+				MAX_DMA_DESC_NUM_HS_ISOC, 512, 0, NULL);
+		if (!hsotg->desc_hsisoc_cache) {
+			dev_err(hsotg->dev,
+				"unable to create dwc2 hs isoc desc cache\n");
+
+			kmem_cache_destroy(hsotg->desc_gen_cache);
+
+			/*
+			 * Disable descriptor dma mode since it will not be
+			 * usable.
+			 */
+			hsotg->params.dma_desc_enable = false;
+			hsotg->params.dma_desc_fs_enable = false;
+		}
+	}
+
+	if (hsotg->params.host_dma) {
+		/*
+		 * Create kmem caches to handle non-aligned buffer
+		 * in Buffer DMA mode.
+		 */
+		hsotg->unaligned_cache = kmem_cache_create("dwc2-unaligned-dma",
+						DWC2_KMEM_UNALIGNED_BUF_SIZE, 4,
+						SLAB_CACHE_DMA, NULL);
+		if (!hsotg->unaligned_cache)
+			dev_err(hsotg->dev,
+				"unable to create dwc2 unaligned cache\n");
+	}
+
+	hsotg->otg_port = 1;
+	hsotg->frame_list = NULL;
+	hsotg->frame_list_dma = 0;
+	hsotg->periodic_qh_count = 0;
+
+	/* Initiate lx_state to L3 disconnected state */
+	hsotg->lx_state = DWC2_L3;
+
+	hcd->self.otg_port = hsotg->otg_port;
+
+	/* Don't support SG list at this point */
+	hcd->self.sg_tablesize = 0;
+
+	if (!IS_ERR_OR_NULL(hsotg->uphy))
+		otg_set_host(hsotg->uphy->otg, &hcd->self);
+
+	/*
+	 * Finish generic HCD initialization and start the HCD. This function
+	 * allocates the DMA buffer pool, registers the USB bus, requests the
+	 * IRQ line, and calls hcd_start method.
+	 */
+	retval = usb_add_hcd(hcd, hsotg->irq, IRQF_SHARED);
+	if (retval < 0)
+		goto error4;
+
+	device_wakeup_enable(hcd->self.controller);
+
+	dwc2_hcd_dump_state(hsotg);
+
+	dwc2_enable_global_interrupts(hsotg);
+
+	return 0;
+
+error4:
+	kmem_cache_destroy(hsotg->unaligned_cache);
+	kmem_cache_destroy(hsotg->desc_hsisoc_cache);
+	kmem_cache_destroy(hsotg->desc_gen_cache);
+error3:
+	dwc2_hcd_release(hsotg);
+error2:
+	usb_put_hcd(hcd);
+error1:
+
+#ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS
+	kfree(hsotg->last_frame_num_array);
+	kfree(hsotg->frame_num_array);
+#endif
+
+	dev_err(hsotg->dev, "%s() FAILED, returning %d\n", __func__, retval);
+	return retval;
+}
+
+/*
+ * Removes the HCD.
+ * Frees memory and resources associated with the HCD and deregisters the bus.
+ */
+void dwc2_hcd_remove(struct dwc2_hsotg *hsotg)
+{
+	struct usb_hcd *hcd;
+
+	dev_dbg(hsotg->dev, "DWC OTG HCD REMOVE\n");
+
+	hcd = dwc2_hsotg_to_hcd(hsotg);
+	dev_dbg(hsotg->dev, "hsotg->hcd = %p\n", hcd);
+
+	if (!hcd) {
+		dev_dbg(hsotg->dev, "%s: dwc2_hsotg_to_hcd(hsotg) NULL!\n",
+			__func__);
+		return;
+	}
+
+	if (!IS_ERR_OR_NULL(hsotg->uphy))
+		otg_set_host(hsotg->uphy->otg, NULL);
+
+	usb_remove_hcd(hcd);
+	hsotg->priv = NULL;
+
+	kmem_cache_destroy(hsotg->unaligned_cache);
+	kmem_cache_destroy(hsotg->desc_hsisoc_cache);
+	kmem_cache_destroy(hsotg->desc_gen_cache);
+
+	dwc2_hcd_release(hsotg);
+	usb_put_hcd(hcd);
+
+#ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS
+	kfree(hsotg->last_frame_num_array);
+	kfree(hsotg->frame_num_array);
+#endif
+}
+
+/**
+ * dwc2_backup_host_registers() - Backup controller host registers.
+ * When suspending usb bus, registers needs to be backuped
+ * if controller power is disabled once suspended.
+ *
+ * @hsotg: Programming view of the DWC_otg controller
+ */
+int dwc2_backup_host_registers(struct dwc2_hsotg *hsotg)
+{
+	struct dwc2_hregs_backup *hr;
+	int i;
+
+	dev_dbg(hsotg->dev, "%s\n", __func__);
+
+	/* Backup Host regs */
+	hr = &hsotg->hr_backup;
+	hr->hcfg = dwc2_readl(hsotg, HCFG);
+	hr->haintmsk = dwc2_readl(hsotg, HAINTMSK);
+	for (i = 0; i < hsotg->params.host_channels; ++i)
+		hr->hcintmsk[i] = dwc2_readl(hsotg, HCINTMSK(i));
+
+	hr->hprt0 = dwc2_read_hprt0(hsotg);
+	hr->hfir = dwc2_readl(hsotg, HFIR);
+	hr->hptxfsiz = dwc2_readl(hsotg, HPTXFSIZ);
+	hr->valid = true;
+
+	return 0;
+}
+
+/**
+ * dwc2_restore_host_registers() - Restore controller host registers.
+ * When resuming usb bus, device registers needs to be restored
+ * if controller power were disabled.
+ *
+ * @hsotg: Programming view of the DWC_otg controller
+ */
+int dwc2_restore_host_registers(struct dwc2_hsotg *hsotg)
+{
+	struct dwc2_hregs_backup *hr;
+	int i;
+
+	dev_dbg(hsotg->dev, "%s\n", __func__);
+
+	/* Restore host regs */
+	hr = &hsotg->hr_backup;
+	if (!hr->valid) {
+		dev_err(hsotg->dev, "%s: no host registers to restore\n",
+			__func__);
+		return -EINVAL;
+	}
+	hr->valid = false;
+
+	dwc2_writel(hsotg, hr->hcfg, HCFG);
+	dwc2_writel(hsotg, hr->haintmsk, HAINTMSK);
+
+	for (i = 0; i < hsotg->params.host_channels; ++i)
+		dwc2_writel(hsotg, hr->hcintmsk[i], HCINTMSK(i));
+
+	dwc2_writel(hsotg, hr->hprt0, HPRT0);
+	dwc2_writel(hsotg, hr->hfir, HFIR);
+	dwc2_writel(hsotg, hr->hptxfsiz, HPTXFSIZ);
+	hsotg->frame_number = 0;
+
+	return 0;
+}
+
+/**
+ * dwc2_host_enter_hibernation() - Put controller in Hibernation.
+ *
+ * @hsotg: Programming view of the DWC_otg controller
+ */
+int dwc2_host_enter_hibernation(struct dwc2_hsotg *hsotg)
+{
+	unsigned long flags;
+	int ret = 0;
+	u32 hprt0;
+	u32 pcgcctl;
+	u32 gusbcfg;
+	u32 gpwrdn;
+
+	dev_dbg(hsotg->dev, "Preparing host for hibernation\n");
+	ret = dwc2_backup_global_registers(hsotg);
+	if (ret) {
+		dev_err(hsotg->dev, "%s: failed to backup global registers\n",
+			__func__);
+		return ret;
+	}
+	ret = dwc2_backup_host_registers(hsotg);
+	if (ret) {
+		dev_err(hsotg->dev, "%s: failed to backup host registers\n",
+			__func__);
+		return ret;
+	}
+
+	/* Enter USB Suspend Mode */
+	hprt0 = dwc2_readl(hsotg, HPRT0);
+	hprt0 |= HPRT0_SUSP;
+	hprt0 &= ~HPRT0_ENA;
+	dwc2_writel(hsotg, hprt0, HPRT0);
+
+	/* Wait for the HPRT0.PrtSusp register field to be set */
+	if (dwc2_hsotg_wait_bit_set(hsotg, HPRT0, HPRT0_SUSP, 5000))
+		dev_warn(hsotg->dev, "Suspend wasn't generated\n");
+
+	/*
+	 * We need to disable interrupts to prevent servicing of any IRQ
+	 * during going to hibernation
+	 */
+	spin_lock_irqsave(&hsotg->lock, flags);
+	hsotg->lx_state = DWC2_L2;
+
+	gusbcfg = dwc2_readl(hsotg, GUSBCFG);
+	if (gusbcfg & GUSBCFG_ULPI_UTMI_SEL) {
+		/* ULPI interface */
+		/* Suspend the Phy Clock */
+		pcgcctl = dwc2_readl(hsotg, PCGCTL);
+		pcgcctl |= PCGCTL_STOPPCLK;
+		dwc2_writel(hsotg, pcgcctl, PCGCTL);
+		udelay(10);
+
+		gpwrdn = dwc2_readl(hsotg, GPWRDN);
+		gpwrdn |= GPWRDN_PMUACTV;
+		dwc2_writel(hsotg, gpwrdn, GPWRDN);
+		udelay(10);
+	} else {
+		/* UTMI+ Interface */
+		gpwrdn = dwc2_readl(hsotg, GPWRDN);
+		gpwrdn |= GPWRDN_PMUACTV;
+		dwc2_writel(hsotg, gpwrdn, GPWRDN);
+		udelay(10);
+
+		pcgcctl = dwc2_readl(hsotg, PCGCTL);
+		pcgcctl |= PCGCTL_STOPPCLK;
+		dwc2_writel(hsotg, pcgcctl, PCGCTL);
+		udelay(10);
+	}
+
+	/* Enable interrupts from wake up logic */
+	gpwrdn = dwc2_readl(hsotg, GPWRDN);
+	gpwrdn |= GPWRDN_PMUINTSEL;
+	dwc2_writel(hsotg, gpwrdn, GPWRDN);
+	udelay(10);
+
+	/* Unmask host mode interrupts in GPWRDN */
+	gpwrdn = dwc2_readl(hsotg, GPWRDN);
+	gpwrdn |= GPWRDN_DISCONN_DET_MSK;
+	gpwrdn |= GPWRDN_LNSTSCHG_MSK;
+	gpwrdn |= GPWRDN_STS_CHGINT_MSK;
+	dwc2_writel(hsotg, gpwrdn, GPWRDN);
+	udelay(10);
+
+	/* Enable Power Down Clamp */
+	gpwrdn = dwc2_readl(hsotg, GPWRDN);
+	gpwrdn |= GPWRDN_PWRDNCLMP;
+	dwc2_writel(hsotg, gpwrdn, GPWRDN);
+	udelay(10);
+
+	/* Switch off VDD */
+	gpwrdn = dwc2_readl(hsotg, GPWRDN);
+	gpwrdn |= GPWRDN_PWRDNSWTCH;
+	dwc2_writel(hsotg, gpwrdn, GPWRDN);
+
+	hsotg->hibernated = 1;
+	hsotg->bus_suspended = 1;
+	dev_dbg(hsotg->dev, "Host hibernation completed\n");
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+	return ret;
+}
+
+/*
+ * dwc2_host_exit_hibernation()
+ *
+ * @hsotg: Programming view of the DWC_otg controller
+ * @rem_wakeup: indicates whether resume is initiated by Device or Host.
+ * @param reset: indicates whether resume is initiated by Reset.
+ *
+ * Return: non-zero if failed to enter to hibernation.
+ *
+ * This function is for exiting from Host mode hibernation by
+ * Host Initiated Resume/Reset and Device Initiated Remote-Wakeup.
+ */
+int dwc2_host_exit_hibernation(struct dwc2_hsotg *hsotg, int rem_wakeup,
+			       int reset)
+{
+	u32 gpwrdn;
+	u32 hprt0;
+	int ret = 0;
+	struct dwc2_gregs_backup *gr;
+	struct dwc2_hregs_backup *hr;
+
+	gr = &hsotg->gr_backup;
+	hr = &hsotg->hr_backup;
+
+	dev_dbg(hsotg->dev,
+		"%s: called with rem_wakeup = %d reset = %d\n",
+		__func__, rem_wakeup, reset);
+
+	dwc2_hib_restore_common(hsotg, rem_wakeup, 1);
+	hsotg->hibernated = 0;
+
+	/*
+	 * This step is not described in functional spec but if not wait for
+	 * this delay, mismatch interrupts occurred because just after restore
+	 * core is in Device mode(gintsts.curmode == 0)
+	 */
+	mdelay(100);
+
+	/* Clear all pending interupts */
+	dwc2_writel(hsotg, 0xffffffff, GINTSTS);
+
+	/* De-assert Restore */
+	gpwrdn = dwc2_readl(hsotg, GPWRDN);
+	gpwrdn &= ~GPWRDN_RESTORE;
+	dwc2_writel(hsotg, gpwrdn, GPWRDN);
+	udelay(10);
+
+	/* Restore GUSBCFG, HCFG */
+	dwc2_writel(hsotg, gr->gusbcfg, GUSBCFG);
+	dwc2_writel(hsotg, hr->hcfg, HCFG);
+
+	/* De-assert Wakeup Logic */
+	gpwrdn = dwc2_readl(hsotg, GPWRDN);
+	gpwrdn &= ~GPWRDN_PMUACTV;
+	dwc2_writel(hsotg, gpwrdn, GPWRDN);
+	udelay(10);
+
+	hprt0 = hr->hprt0;
+	hprt0 |= HPRT0_PWR;
+	hprt0 &= ~HPRT0_ENA;
+	hprt0 &= ~HPRT0_SUSP;
+	dwc2_writel(hsotg, hprt0, HPRT0);
+
+	hprt0 = hr->hprt0;
+	hprt0 |= HPRT0_PWR;
+	hprt0 &= ~HPRT0_ENA;
+	hprt0 &= ~HPRT0_SUSP;
+
+	if (reset) {
+		hprt0 |= HPRT0_RST;
+		dwc2_writel(hsotg, hprt0, HPRT0);
+
+		/* Wait for Resume time and then program HPRT again */
+		mdelay(60);
+		hprt0 &= ~HPRT0_RST;
+		dwc2_writel(hsotg, hprt0, HPRT0);
+	} else {
+		hprt0 |= HPRT0_RES;
+		dwc2_writel(hsotg, hprt0, HPRT0);
+
+		/* Wait for Resume time and then program HPRT again */
+		mdelay(100);
+		hprt0 &= ~HPRT0_RES;
+		dwc2_writel(hsotg, hprt0, HPRT0);
+	}
+	/* Clear all interrupt status */
+	hprt0 = dwc2_readl(hsotg, HPRT0);
+	hprt0 |= HPRT0_CONNDET;
+	hprt0 |= HPRT0_ENACHG;
+	hprt0 &= ~HPRT0_ENA;
+	dwc2_writel(hsotg, hprt0, HPRT0);
+
+	hprt0 = dwc2_readl(hsotg, HPRT0);
+
+	/* Clear all pending interupts */
+	dwc2_writel(hsotg, 0xffffffff, GINTSTS);
+
+	/* Restore global registers */
+	ret = dwc2_restore_global_registers(hsotg);
+	if (ret) {
+		dev_err(hsotg->dev, "%s: failed to restore registers\n",
+			__func__);
+		return ret;
+	}
+
+	/* Restore host registers */
+	ret = dwc2_restore_host_registers(hsotg);
+	if (ret) {
+		dev_err(hsotg->dev, "%s: failed to restore host registers\n",
+			__func__);
+		return ret;
+	}
+
+	if (rem_wakeup) {
+		dwc2_hcd_rem_wakeup(hsotg);
+		/*
+		 * Change "port_connect_status_change" flag to re-enumerate,
+		 * because after exit from hibernation port connection status
+		 * is not detected.
+		 */
+		hsotg->flags.b.port_connect_status_change = 1;
+	}
+
+	hsotg->hibernated = 0;
+	hsotg->bus_suspended = 0;
+	hsotg->lx_state = DWC2_L0;
+	dev_dbg(hsotg->dev, "Host hibernation restore complete\n");
+	return ret;
+}
+
+bool dwc2_host_can_poweroff_phy(struct dwc2_hsotg *dwc2)
+{
+	struct usb_device *root_hub = dwc2_hsotg_to_hcd(dwc2)->self.root_hub;
+
+	/* If the controller isn't allowed to wakeup then we can power off. */
+	if (!device_may_wakeup(dwc2->dev))
+		return true;
+
+	/*
+	 * We don't want to power off the PHY if something under the
+	 * root hub has wakeup enabled.
+	 */
+	if (usb_wakeup_enabled_descendants(root_hub))
+		return false;
+
+	/* No reason to keep the PHY powered, so allow poweroff */
+	return true;
+}