Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 590 insertions, 0 deletions

diff --git a/drivers/usb/gadget/udc/bdc/bdc_udc.c b/drivers/usb/gadget/udc/bdc/bdc_udc.c
new file mode 100644
index 000000000..5f0b3fd93
--- /dev/null
+++ b/drivers/usb/gadget/udc/bdc/bdc_udc.c
@@ -0,0 +1,590 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * bdc_udc.c - BRCM BDC USB3.0 device controller gagdet ops
+ *
+ * Copyright (C) 2014 Broadcom Corporation
+ *
+ * Author: Ashwini Pahuja
+ *
+ * Based on drivers under drivers/usb/gadget/udc/
+ */
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/timer.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/moduleparam.h>
+#include <linux/device.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/otg.h>
+#include <linux/pm.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <asm/unaligned.h>
+#include <linux/platform_device.h>
+
+#include "bdc.h"
+#include "bdc_ep.h"
+#include "bdc_cmd.h"
+#include "bdc_dbg.h"
+
+static const struct usb_gadget_ops bdc_gadget_ops;
+
+static const char * const conn_speed_str[] =  {
+	"Not connected",
+	"Full Speed",
+	"Low Speed",
+	"High Speed",
+	"Super Speed",
+};
+
+/* EP0 initial descripror */
+static struct usb_endpoint_descriptor bdc_gadget_ep0_desc = {
+	.bLength = USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType = USB_DT_ENDPOINT,
+	.bmAttributes = USB_ENDPOINT_XFER_CONTROL,
+	.bEndpointAddress = 0,
+	.wMaxPacketSize	= cpu_to_le16(EP0_MAX_PKT_SIZE),
+};
+
+/* Advance the srr dqp maintained by SW */
+static void srr_dqp_index_advc(struct bdc *bdc, u32 srr_num)
+{
+	struct srr *srr;
+
+	srr = &bdc->srr;
+	dev_dbg_ratelimited(bdc->dev, "srr->dqp_index:%d\n", srr->dqp_index);
+	srr->dqp_index++;
+	/* rollback to 0 if we are past the last */
+	if (srr->dqp_index == NUM_SR_ENTRIES)
+		srr->dqp_index = 0;
+}
+
+/* connect sr */
+static void bdc_uspc_connected(struct bdc *bdc)
+{
+	u32 speed, temp;
+	u32 usppms;
+	int ret;
+
+	temp = bdc_readl(bdc->regs, BDC_USPC);
+	speed = BDC_PSP(temp);
+	dev_dbg(bdc->dev, "%s speed=%x\n", __func__, speed);
+	switch (speed) {
+	case BDC_SPEED_SS:
+		bdc_gadget_ep0_desc.wMaxPacketSize =
+						cpu_to_le16(EP0_MAX_PKT_SIZE);
+		bdc->gadget.ep0->maxpacket = EP0_MAX_PKT_SIZE;
+		bdc->gadget.speed = USB_SPEED_SUPER;
+		/* Enable U1T in SS mode */
+		usppms =  bdc_readl(bdc->regs, BDC_USPPMS);
+		usppms &= ~BDC_U1T(0xff);
+		usppms |= BDC_U1T(U1_TIMEOUT);
+		usppms |= BDC_PORT_W1S;
+		bdc_writel(bdc->regs, BDC_USPPMS, usppms);
+		break;
+
+	case BDC_SPEED_HS:
+		bdc_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64);
+		bdc->gadget.ep0->maxpacket = 64;
+		bdc->gadget.speed = USB_SPEED_HIGH;
+		break;
+
+	case BDC_SPEED_FS:
+		bdc_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64);
+		bdc->gadget.ep0->maxpacket = 64;
+		bdc->gadget.speed = USB_SPEED_FULL;
+		break;
+
+	case BDC_SPEED_LS:
+		bdc_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(8);
+		bdc->gadget.ep0->maxpacket = 8;
+		bdc->gadget.speed = USB_SPEED_LOW;
+		break;
+	default:
+		dev_err(bdc->dev, "UNDEFINED SPEED\n");
+		return;
+	}
+	dev_dbg(bdc->dev, "connected at %s\n", conn_speed_str[speed]);
+	/* Now we know the speed, configure ep0 */
+	bdc->bdc_ep_array[1]->desc = &bdc_gadget_ep0_desc;
+	ret = bdc_config_ep(bdc, bdc->bdc_ep_array[1]);
+	if (ret)
+		dev_err(bdc->dev, "EP0 config failed\n");
+	bdc->bdc_ep_array[1]->usb_ep.desc = &bdc_gadget_ep0_desc;
+	bdc->bdc_ep_array[1]->flags |= BDC_EP_ENABLED;
+	usb_gadget_set_state(&bdc->gadget, USB_STATE_DEFAULT);
+}
+
+/* device got disconnected */
+static void bdc_uspc_disconnected(struct bdc *bdc, bool reinit)
+{
+	struct bdc_ep *ep;
+
+	dev_dbg(bdc->dev, "%s\n", __func__);
+	/*
+	 * Only stop ep0 from here, rest of the endpoints will be disabled
+	 * from gadget_disconnect
+	 */
+	ep = bdc->bdc_ep_array[1];
+	if (ep && (ep->flags & BDC_EP_ENABLED))
+		/* if enabled then stop and remove requests */
+		bdc_ep_disable(ep);
+
+	if (bdc->gadget_driver && bdc->gadget_driver->disconnect) {
+		spin_unlock(&bdc->lock);
+		bdc->gadget_driver->disconnect(&bdc->gadget);
+		spin_lock(&bdc->lock);
+	}
+	/* Set Unknown speed */
+	bdc->gadget.speed = USB_SPEED_UNKNOWN;
+	bdc->devstatus &= DEVSTATUS_CLEAR;
+	bdc->delayed_status = false;
+	bdc->reinit = reinit;
+	bdc->test_mode = false;
+	usb_gadget_set_state(&bdc->gadget, USB_STATE_NOTATTACHED);
+}
+
+/* TNotify wkaeup timer */
+static void bdc_func_wake_timer(struct work_struct *work)
+{
+	struct bdc *bdc = container_of(work, struct bdc, func_wake_notify.work);
+	unsigned long flags;
+
+	dev_dbg(bdc->dev, "%s\n", __func__);
+	spin_lock_irqsave(&bdc->lock, flags);
+	/*
+	 * Check if host has started transferring on endpoints
+	 * FUNC_WAKE_ISSUED is cleared when transfer has started after resume
+	*/
+	if (bdc->devstatus & FUNC_WAKE_ISSUED) {
+		dev_dbg(bdc->dev, "FUNC_WAKE_ISSUED FLAG IS STILL SET\n");
+		/* flag is still set, so again send func wake */
+		bdc_function_wake_fh(bdc, 0);
+		schedule_delayed_work(&bdc->func_wake_notify,
+						msecs_to_jiffies(BDC_TNOTIFY));
+	}
+	spin_unlock_irqrestore(&bdc->lock, flags);
+}
+
+/* handler for Link state change condition */
+static void handle_link_state_change(struct bdc *bdc, u32 uspc)
+{
+	u32 link_state;
+
+	dev_dbg(bdc->dev, "Link state change");
+	link_state = BDC_PST(uspc);
+	switch (link_state) {
+	case BDC_LINK_STATE_U3:
+		if ((bdc->gadget.speed != USB_SPEED_UNKNOWN) &&
+						bdc->gadget_driver->suspend) {
+			dev_dbg(bdc->dev, "Entered Suspend mode\n");
+			spin_unlock(&bdc->lock);
+			bdc->devstatus |= DEVICE_SUSPENDED;
+			bdc->gadget_driver->suspend(&bdc->gadget);
+			spin_lock(&bdc->lock);
+		}
+		break;
+	case BDC_LINK_STATE_U0:
+		if (bdc->devstatus & REMOTE_WAKEUP_ISSUED) {
+			bdc->devstatus &= ~REMOTE_WAKEUP_ISSUED;
+			if (bdc->gadget.speed == USB_SPEED_SUPER) {
+				bdc_function_wake_fh(bdc, 0);
+				bdc->devstatus |= FUNC_WAKE_ISSUED;
+				/*
+				 * Start a Notification timer and check if the
+				 * Host transferred anything on any of the EPs,
+				 * if not then send function wake again every
+				 * TNotification secs until host initiates
+				 * transfer to BDC, USB3 spec Table 8.13
+				*/
+				schedule_delayed_work(
+						&bdc->func_wake_notify,
+						msecs_to_jiffies(BDC_TNOTIFY));
+				dev_dbg(bdc->dev, "sched func_wake_notify\n");
+			}
+		}
+		break;
+
+	case BDC_LINK_STATE_RESUME:
+		dev_dbg(bdc->dev, "Resumed from Suspend\n");
+		if (bdc->devstatus & DEVICE_SUSPENDED) {
+			bdc->gadget_driver->resume(&bdc->gadget);
+			bdc->devstatus &= ~DEVICE_SUSPENDED;
+		}
+		break;
+	default:
+		dev_dbg(bdc->dev, "link state:%d\n", link_state);
+	}
+}
+
+/* something changes on upstream port, handle it here */
+void bdc_sr_uspc(struct bdc *bdc, struct bdc_sr *sreport)
+{
+	u32 clear_flags = 0;
+	u32 uspc;
+	bool connected = false;
+	bool disconn = false;
+
+	uspc = bdc_readl(bdc->regs, BDC_USPC);
+	dev_dbg(bdc->dev, "%s uspc=0x%08x\n", __func__, uspc);
+
+	/* Port connect changed */
+	if (uspc & BDC_PCC) {
+		/* Vbus not present, and not connected to Downstream port */
+		if ((uspc & BDC_VBC) && !(uspc & BDC_VBS) && !(uspc & BDC_PCS))
+			disconn = true;
+		else if ((uspc & BDC_PCS) && !BDC_PST(uspc))
+			connected = true;
+		clear_flags |= BDC_PCC;
+	}
+
+	/* Change in VBus and VBus is present */
+	if ((uspc & BDC_VBC) && (uspc & BDC_VBS)) {
+		if (bdc->pullup) {
+			dev_dbg(bdc->dev, "Do a softconnect\n");
+			/* Attached state, do a softconnect */
+			bdc_softconn(bdc);
+			usb_gadget_set_state(&bdc->gadget, USB_STATE_POWERED);
+		}
+		clear_flags |= BDC_VBC;
+	} else if ((uspc & BDC_PRS) || (uspc & BDC_PRC) || disconn) {
+		/* Hot reset, warm reset, 2.0 bus reset or disconn */
+		dev_dbg(bdc->dev, "Port reset or disconn\n");
+		bdc_uspc_disconnected(bdc, disconn);
+		clear_flags |= BDC_PRC;
+	} else if ((uspc & BDC_PSC) && (uspc & BDC_PCS)) {
+		/* Change in Link state */
+		handle_link_state_change(bdc, uspc);
+		clear_flags |= BDC_PSC;
+	}
+
+	/*
+	 * In SS we might not have PRC bit set before connection, but in 2.0
+	 * the PRC bit is set before connection, so moving this condition out
+	 * of bus reset to handle both SS/2.0 speeds.
+	 */
+	if (connected) {
+		/* This is the connect event for U0/L0 */
+		dev_dbg(bdc->dev, "Connected\n");
+		bdc_uspc_connected(bdc);
+		bdc->devstatus &= ~(DEVICE_SUSPENDED);
+	}
+	uspc = bdc_readl(bdc->regs, BDC_USPC);
+	uspc &= (~BDC_USPSC_RW);
+	dev_dbg(bdc->dev, "uspc=%x\n", uspc);
+	bdc_writel(bdc->regs, BDC_USPC, clear_flags);
+}
+
+/* Main interrupt handler for bdc */
+static irqreturn_t bdc_udc_interrupt(int irq, void *_bdc)
+{
+	u32 eqp_index, dqp_index, sr_type, srr_int;
+	struct bdc_sr *sreport;
+	struct bdc *bdc = _bdc;
+	u32 status;
+	int ret;
+
+	spin_lock(&bdc->lock);
+	status = bdc_readl(bdc->regs, BDC_BDCSC);
+	if (!(status & BDC_GIP)) {
+		spin_unlock(&bdc->lock);
+		return IRQ_NONE;
+	}
+	srr_int = bdc_readl(bdc->regs, BDC_SRRINT(0));
+	/* Check if the SRR IP bit it set? */
+	if (!(srr_int & BDC_SRR_IP)) {
+		dev_warn(bdc->dev, "Global irq pending but SRR IP is 0\n");
+		spin_unlock(&bdc->lock);
+		return IRQ_NONE;
+	}
+	eqp_index = BDC_SRR_EPI(srr_int);
+	dqp_index = BDC_SRR_DPI(srr_int);
+	dev_dbg(bdc->dev,
+			"%s eqp_index=%d dqp_index=%d  srr.dqp_index=%d\n\n",
+			 __func__, eqp_index, dqp_index, bdc->srr.dqp_index);
+
+	/* check for ring empty condition */
+	if (eqp_index == dqp_index) {
+		dev_dbg(bdc->dev, "SRR empty?\n");
+		spin_unlock(&bdc->lock);
+		return IRQ_HANDLED;
+	}
+
+	while (bdc->srr.dqp_index != eqp_index) {
+		sreport = &bdc->srr.sr_bds[bdc->srr.dqp_index];
+		/* sreport is read before using it */
+		rmb();
+		sr_type = le32_to_cpu(sreport->offset[3]) & BD_TYPE_BITMASK;
+		dev_dbg_ratelimited(bdc->dev, "sr_type=%d\n", sr_type);
+		switch (sr_type) {
+		case SR_XSF:
+			bdc->sr_handler[0](bdc, sreport);
+			break;
+
+		case SR_USPC:
+			bdc->sr_handler[1](bdc, sreport);
+			break;
+		default:
+			dev_warn(bdc->dev, "SR:%d not handled\n", sr_type);
+		}
+		/* Advance the srr dqp index */
+		srr_dqp_index_advc(bdc, 0);
+	}
+	/* update the hw dequeue pointer */
+	srr_int = bdc_readl(bdc->regs, BDC_SRRINT(0));
+	srr_int &= ~BDC_SRR_DPI_MASK;
+	srr_int &= ~(BDC_SRR_RWS|BDC_SRR_RST|BDC_SRR_ISR);
+	srr_int |= ((bdc->srr.dqp_index) << 16);
+	srr_int |= BDC_SRR_IP;
+	bdc_writel(bdc->regs, BDC_SRRINT(0), srr_int);
+	srr_int = bdc_readl(bdc->regs, BDC_SRRINT(0));
+	if (bdc->reinit) {
+		ret = bdc_reinit(bdc);
+		if (ret)
+			dev_err(bdc->dev, "err in bdc reinit\n");
+	}
+
+	spin_unlock(&bdc->lock);
+
+	return IRQ_HANDLED;
+}
+
+/* Gadget ops */
+static int bdc_udc_start(struct usb_gadget *gadget,
+				struct usb_gadget_driver *driver)
+{
+	struct bdc *bdc = gadget_to_bdc(gadget);
+	unsigned long flags;
+	int ret = 0;
+
+	dev_dbg(bdc->dev, "%s()\n", __func__);
+	spin_lock_irqsave(&bdc->lock, flags);
+	if (bdc->gadget_driver) {
+		dev_err(bdc->dev, "%s is already bound to %s\n",
+			bdc->gadget.name,
+			bdc->gadget_driver->driver.name);
+		ret = -EBUSY;
+		goto err;
+	}
+	/*
+	 * Run the controller from here and when BDC is connected to
+	 * Host then driver will receive a USPC SR with VBUS present
+	 * and then driver will do a softconnect.
+	*/
+	ret = bdc_run(bdc);
+	if (ret) {
+		dev_err(bdc->dev, "%s bdc run fail\n", __func__);
+		goto err;
+	}
+	bdc->gadget_driver = driver;
+	bdc->gadget.dev.driver = &driver->driver;
+err:
+	spin_unlock_irqrestore(&bdc->lock, flags);
+
+	return ret;
+}
+
+static int bdc_udc_stop(struct usb_gadget *gadget)
+{
+	struct bdc *bdc = gadget_to_bdc(gadget);
+	unsigned long flags;
+
+	dev_dbg(bdc->dev, "%s()\n", __func__);
+	spin_lock_irqsave(&bdc->lock, flags);
+	bdc_stop(bdc);
+	bdc->gadget_driver = NULL;
+	bdc->gadget.dev.driver = NULL;
+	spin_unlock_irqrestore(&bdc->lock, flags);
+
+	return 0;
+}
+
+static int bdc_udc_pullup(struct usb_gadget *gadget, int is_on)
+{
+	struct bdc *bdc = gadget_to_bdc(gadget);
+	unsigned long flags;
+	u32 uspc;
+
+	dev_dbg(bdc->dev, "%s() is_on:%d\n", __func__, is_on);
+	if (!gadget)
+		return -EINVAL;
+
+	spin_lock_irqsave(&bdc->lock, flags);
+	if (!is_on) {
+		bdc_softdisconn(bdc);
+		bdc->pullup = false;
+	} else {
+		/*
+		 * For a self powered device, we need to wait till we receive
+		 * a VBUS change and Vbus present event, then if pullup flag
+		 * is set, then only we present the Termintation.
+		 */
+		bdc->pullup = true;
+		/*
+		 * Check if BDC is already connected to Host i.e Vbus=1,
+		 * if yes, then present TERM now, this is typical for bus
+		 * powered devices.
+		 */
+		uspc = bdc_readl(bdc->regs, BDC_USPC);
+		if (uspc & BDC_VBS)
+			bdc_softconn(bdc);
+	}
+	spin_unlock_irqrestore(&bdc->lock, flags);
+
+	return 0;
+}
+
+static int bdc_udc_set_selfpowered(struct usb_gadget *gadget,
+		int is_self)
+{
+	struct bdc		*bdc = gadget_to_bdc(gadget);
+	unsigned long           flags;
+
+	dev_dbg(bdc->dev, "%s()\n", __func__);
+	gadget->is_selfpowered = (is_self != 0);
+	spin_lock_irqsave(&bdc->lock, flags);
+	if (!is_self)
+		bdc->devstatus |= 1 << USB_DEVICE_SELF_POWERED;
+	else
+		bdc->devstatus &= ~(1 << USB_DEVICE_SELF_POWERED);
+
+	spin_unlock_irqrestore(&bdc->lock, flags);
+
+	return 0;
+}
+
+static int bdc_udc_wakeup(struct usb_gadget *gadget)
+{
+	struct bdc *bdc = gadget_to_bdc(gadget);
+	unsigned long		flags;
+	u8	link_state;
+	u32	uspc;
+	int ret = 0;
+
+	dev_dbg(bdc->dev,
+		"%s() bdc->devstatus=%08x\n",
+		__func__, bdc->devstatus);
+
+	if (!(bdc->devstatus & REMOTE_WAKE_ENABLE))
+		return  -EOPNOTSUPP;
+
+	spin_lock_irqsave(&bdc->lock, flags);
+	uspc = bdc_readl(bdc->regs, BDC_USPC);
+	link_state = BDC_PST(uspc);
+	dev_dbg(bdc->dev, "link_state =%d portsc=%x", link_state, uspc);
+	if (link_state != BDC_LINK_STATE_U3) {
+		dev_warn(bdc->dev,
+			"can't wakeup from link state %d\n",
+			link_state);
+		ret = -EINVAL;
+		goto out;
+	}
+	if (bdc->gadget.speed == USB_SPEED_SUPER)
+		bdc->devstatus |= REMOTE_WAKEUP_ISSUED;
+
+	uspc &= ~BDC_PST_MASK;
+	uspc &= (~BDC_USPSC_RW);
+	uspc |=  BDC_PST(BDC_LINK_STATE_U0);
+	uspc |=  BDC_SWS;
+	bdc_writel(bdc->regs, BDC_USPC, uspc);
+	uspc = bdc_readl(bdc->regs, BDC_USPC);
+	link_state = BDC_PST(uspc);
+	dev_dbg(bdc->dev, "link_state =%d portsc=%x", link_state, uspc);
+out:
+	spin_unlock_irqrestore(&bdc->lock, flags);
+
+	return ret;
+}
+
+static const struct usb_gadget_ops bdc_gadget_ops = {
+	.wakeup = bdc_udc_wakeup,
+	.set_selfpowered = bdc_udc_set_selfpowered,
+	.pullup = bdc_udc_pullup,
+	.udc_start = bdc_udc_start,
+	.udc_stop = bdc_udc_stop,
+};
+
+/* Init the gadget interface and register the udc */
+int bdc_udc_init(struct bdc *bdc)
+{
+	u32 temp;
+	int ret;
+
+	dev_dbg(bdc->dev, "%s()\n", __func__);
+	bdc->gadget.ops = &bdc_gadget_ops;
+	bdc->gadget.max_speed = USB_SPEED_SUPER;
+	bdc->gadget.speed = USB_SPEED_UNKNOWN;
+	bdc->gadget.dev.parent = bdc->dev;
+
+	bdc->gadget.sg_supported = false;
+
+
+	bdc->gadget.name = BRCM_BDC_NAME;
+	ret = devm_request_irq(bdc->dev, bdc->irq, bdc_udc_interrupt,
+				IRQF_SHARED , BRCM_BDC_NAME, bdc);
+	if (ret) {
+		dev_err(bdc->dev,
+			"failed to request irq #%d %d\n",
+			bdc->irq, ret);
+		return ret;
+	}
+
+	ret = bdc_init_ep(bdc);
+	if (ret) {
+		dev_err(bdc->dev, "bdc init ep fail: %d\n", ret);
+		return ret;
+	}
+
+	ret = usb_add_gadget_udc(bdc->dev, &bdc->gadget);
+	if (ret) {
+		dev_err(bdc->dev, "failed to register udc\n");
+		goto err0;
+	}
+	usb_gadget_set_state(&bdc->gadget, USB_STATE_NOTATTACHED);
+	bdc->bdc_ep_array[1]->desc = &bdc_gadget_ep0_desc;
+	/*
+	 * Allocate bd list for ep0 only, ep0 will be enabled on connect
+	 * status report when the speed is known
+	 */
+	ret = bdc_ep_enable(bdc->bdc_ep_array[1]);
+	if (ret) {
+		dev_err(bdc->dev, "fail to enable %s\n",
+						bdc->bdc_ep_array[1]->name);
+		goto err1;
+	}
+	INIT_DELAYED_WORK(&bdc->func_wake_notify, bdc_func_wake_timer);
+	/* Enable Interrupts */
+	temp = bdc_readl(bdc->regs, BDC_BDCSC);
+	temp |= BDC_GIE;
+	bdc_writel(bdc->regs, BDC_BDCSC, temp);
+	return 0;
+err1:
+	usb_del_gadget_udc(&bdc->gadget);
+err0:
+	bdc_free_ep(bdc);
+
+	return ret;
+}
+
+void bdc_udc_exit(struct bdc *bdc)
+{
+	unsigned long flags;
+
+	dev_dbg(bdc->dev, "%s()\n", __func__);
+	spin_lock_irqsave(&bdc->lock, flags);
+	bdc_ep_disable(bdc->bdc_ep_array[1]);
+	spin_unlock_irqrestore(&bdc->lock, flags);
+
+	usb_del_gadget_udc(&bdc->gadget);
+	bdc_free_ep(bdc);
+}