Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1891 insertions, 0 deletions

diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
new file mode 100644
index 000000000..e92f92025
--- /dev/null
+++ b/drivers/usb/host/xhci-hub.c
@@ -0,0 +1,1891 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * xHCI host controller driver
+ *
+ * Copyright (C) 2008 Intel Corp.
+ *
+ * Author: Sarah Sharp
+ * Some code borrowed from the Linux EHCI driver.
+ */
+
+
+#include <linux/slab.h>
+#include <asm/unaligned.h>
+
+#include "xhci.h"
+#include "xhci-trace.h"
+
+#define	PORT_WAKE_BITS	(PORT_WKOC_E | PORT_WKDISC_E | PORT_WKCONN_E)
+#define	PORT_RWC_BITS	(PORT_CSC | PORT_PEC | PORT_WRC | PORT_OCC | \
+			 PORT_RC | PORT_PLC | PORT_PE)
+
+/* USB 3 BOS descriptor and a capability descriptors, combined.
+ * Fields will be adjusted and added later in xhci_create_usb3_bos_desc()
+ */
+static u8 usb_bos_descriptor [] = {
+	USB_DT_BOS_SIZE,		/*  __u8 bLength, 5 bytes */
+	USB_DT_BOS,			/*  __u8 bDescriptorType */
+	0x0F, 0x00,			/*  __le16 wTotalLength, 15 bytes */
+	0x1,				/*  __u8 bNumDeviceCaps */
+	/* First device capability, SuperSpeed */
+	USB_DT_USB_SS_CAP_SIZE,		/*  __u8 bLength, 10 bytes */
+	USB_DT_DEVICE_CAPABILITY,	/* Device Capability */
+	USB_SS_CAP_TYPE,		/* bDevCapabilityType, SUPERSPEED_USB */
+	0x00,				/* bmAttributes, LTM off by default */
+	USB_5GBPS_OPERATION, 0x00,	/* wSpeedsSupported, 5Gbps only */
+	0x03,				/* bFunctionalitySupport,
+					   USB 3.0 speed only */
+	0x00,				/* bU1DevExitLat, set later. */
+	0x00, 0x00,			/* __le16 bU2DevExitLat, set later. */
+	/* Second device capability, SuperSpeedPlus */
+	0x1c,				/* bLength 28, will be adjusted later */
+	USB_DT_DEVICE_CAPABILITY,	/* Device Capability */
+	USB_SSP_CAP_TYPE,		/* bDevCapabilityType SUPERSPEED_PLUS */
+	0x00,				/* bReserved 0 */
+	0x23, 0x00, 0x00, 0x00,		/* bmAttributes, SSAC=3 SSIC=1 */
+	0x01, 0x00,			/* wFunctionalitySupport */
+	0x00, 0x00,			/* wReserved 0 */
+	/* Default Sublink Speed Attributes, overwrite if custom PSI exists */
+	0x34, 0x00, 0x05, 0x00,		/* 5Gbps, symmetric, rx, ID = 4 */
+	0xb4, 0x00, 0x05, 0x00,		/* 5Gbps, symmetric, tx, ID = 4 */
+	0x35, 0x40, 0x0a, 0x00,		/* 10Gbps, SSP, symmetric, rx, ID = 5 */
+	0xb5, 0x40, 0x0a, 0x00,		/* 10Gbps, SSP, symmetric, tx, ID = 5 */
+};
+
+static int xhci_create_usb3_bos_desc(struct xhci_hcd *xhci, char *buf,
+				     u16 wLength)
+{
+	struct xhci_port_cap *port_cap = NULL;
+	int i, ssa_count;
+	u32 temp;
+	u16 desc_size, ssp_cap_size, ssa_size = 0;
+	bool usb3_1 = false;
+
+	desc_size = USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE;
+	ssp_cap_size = sizeof(usb_bos_descriptor) - desc_size;
+
+	/* does xhci support USB 3.1 Enhanced SuperSpeed */
+	for (i = 0; i < xhci->num_port_caps; i++) {
+		if (xhci->port_caps[i].maj_rev == 0x03 &&
+		    xhci->port_caps[i].min_rev >= 0x01) {
+			usb3_1 = true;
+			port_cap = &xhci->port_caps[i];
+			break;
+		}
+	}
+
+	if (usb3_1) {
+		/* does xhci provide a PSI table for SSA speed attributes? */
+		if (port_cap->psi_count) {
+			/* two SSA entries for each unique PSI ID, RX and TX */
+			ssa_count = port_cap->psi_uid_count * 2;
+			ssa_size = ssa_count * sizeof(u32);
+			ssp_cap_size -= 16; /* skip copying the default SSA */
+		}
+		desc_size += ssp_cap_size;
+	}
+	memcpy(buf, &usb_bos_descriptor, min(desc_size, wLength));
+
+	if (usb3_1) {
+		/* modify bos descriptor bNumDeviceCaps and wTotalLength */
+		buf[4] += 1;
+		put_unaligned_le16(desc_size + ssa_size, &buf[2]);
+	}
+
+	if (wLength < USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE)
+		return wLength;
+
+	/* Indicate whether the host has LTM support. */
+	temp = readl(&xhci->cap_regs->hcc_params);
+	if (HCC_LTC(temp))
+		buf[8] |= USB_LTM_SUPPORT;
+
+	/* Set the U1 and U2 exit latencies. */
+	if ((xhci->quirks & XHCI_LPM_SUPPORT)) {
+		temp = readl(&xhci->cap_regs->hcs_params3);
+		buf[12] = HCS_U1_LATENCY(temp);
+		put_unaligned_le16(HCS_U2_LATENCY(temp), &buf[13]);
+	}
+
+	/* If PSI table exists, add the custom speed attributes from it */
+	if (usb3_1 && port_cap->psi_count) {
+		u32 ssp_cap_base, bm_attrib, psi, psi_mant, psi_exp;
+		int offset;
+
+		ssp_cap_base = USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE;
+
+		if (wLength < desc_size)
+			return wLength;
+		buf[ssp_cap_base] = ssp_cap_size + ssa_size;
+
+		/* attribute count SSAC bits 4:0 and ID count SSIC bits 8:5 */
+		bm_attrib = (ssa_count - 1) & 0x1f;
+		bm_attrib |= (port_cap->psi_uid_count - 1) << 5;
+		put_unaligned_le32(bm_attrib, &buf[ssp_cap_base + 4]);
+
+		if (wLength < desc_size + ssa_size)
+			return wLength;
+		/*
+		 * Create the Sublink Speed Attributes (SSA) array.
+		 * The xhci PSI field and USB 3.1 SSA fields are very similar,
+		 * but link type bits 7:6 differ for values 01b and 10b.
+		 * xhci has also only one PSI entry for a symmetric link when
+		 * USB 3.1 requires two SSA entries (RX and TX) for every link
+		 */
+		offset = desc_size;
+		for (i = 0; i < port_cap->psi_count; i++) {
+			psi = port_cap->psi[i];
+			psi &= ~USB_SSP_SUBLINK_SPEED_RSVD;
+			psi_exp = XHCI_EXT_PORT_PSIE(psi);
+			psi_mant = XHCI_EXT_PORT_PSIM(psi);
+
+			/* Shift to Gbps and set SSP Link BIT(14) if 10Gpbs */
+			for (; psi_exp < 3; psi_exp++)
+				psi_mant /= 1000;
+			if (psi_mant >= 10)
+				psi |= BIT(14);
+
+			if ((psi & PLT_MASK) == PLT_SYM) {
+			/* Symmetric, create SSA RX and TX from one PSI entry */
+				put_unaligned_le32(psi, &buf[offset]);
+				psi |= 1 << 7;  /* turn entry to TX */
+				offset += 4;
+				if (offset >= desc_size + ssa_size)
+					return desc_size + ssa_size;
+			} else if ((psi & PLT_MASK) == PLT_ASYM_RX) {
+				/* Asymetric RX, flip bits 7:6 for SSA */
+				psi ^= PLT_MASK;
+			}
+			put_unaligned_le32(psi, &buf[offset]);
+			offset += 4;
+			if (offset >= desc_size + ssa_size)
+				return desc_size + ssa_size;
+		}
+	}
+	/* ssa_size is 0 for other than usb 3.1 hosts */
+	return desc_size + ssa_size;
+}
+
+static void xhci_common_hub_descriptor(struct xhci_hcd *xhci,
+		struct usb_hub_descriptor *desc, int ports)
+{
+	u16 temp;
+
+	desc->bHubContrCurrent = 0;
+
+	desc->bNbrPorts = ports;
+	temp = 0;
+	/* Bits 1:0 - support per-port power switching, or power always on */
+	if (HCC_PPC(xhci->hcc_params))
+		temp |= HUB_CHAR_INDV_PORT_LPSM;
+	else
+		temp |= HUB_CHAR_NO_LPSM;
+	/* Bit  2 - root hubs are not part of a compound device */
+	/* Bits 4:3 - individual port over current protection */
+	temp |= HUB_CHAR_INDV_PORT_OCPM;
+	/* Bits 6:5 - no TTs in root ports */
+	/* Bit  7 - no port indicators */
+	desc->wHubCharacteristics = cpu_to_le16(temp);
+}
+
+/* Fill in the USB 2.0 roothub descriptor */
+static void xhci_usb2_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci,
+		struct usb_hub_descriptor *desc)
+{
+	int ports;
+	u16 temp;
+	__u8 port_removable[(USB_MAXCHILDREN + 1 + 7) / 8];
+	u32 portsc;
+	unsigned int i;
+	struct xhci_hub *rhub;
+
+	rhub = &xhci->usb2_rhub;
+	ports = rhub->num_ports;
+	xhci_common_hub_descriptor(xhci, desc, ports);
+	desc->bDescriptorType = USB_DT_HUB;
+	temp = 1 + (ports / 8);
+	desc->bDescLength = USB_DT_HUB_NONVAR_SIZE + 2 * temp;
+	desc->bPwrOn2PwrGood = 10;	/* xhci section 5.4.8 says 20ms */
+
+	/* The Device Removable bits are reported on a byte granularity.
+	 * If the port doesn't exist within that byte, the bit is set to 0.
+	 */
+	memset(port_removable, 0, sizeof(port_removable));
+	for (i = 0; i < ports; i++) {
+		portsc = readl(rhub->ports[i]->addr);
+		/* If a device is removable, PORTSC reports a 0, same as in the
+		 * hub descriptor DeviceRemovable bits.
+		 */
+		if (portsc & PORT_DEV_REMOVE)
+			/* This math is hairy because bit 0 of DeviceRemovable
+			 * is reserved, and bit 1 is for port 1, etc.
+			 */
+			port_removable[(i + 1) / 8] |= 1 << ((i + 1) % 8);
+	}
+
+	/* ch11.h defines a hub descriptor that has room for USB_MAXCHILDREN
+	 * ports on it.  The USB 2.0 specification says that there are two
+	 * variable length fields at the end of the hub descriptor:
+	 * DeviceRemovable and PortPwrCtrlMask.  But since we can have less than
+	 * USB_MAXCHILDREN ports, we may need to use the DeviceRemovable array
+	 * to set PortPwrCtrlMask bits.  PortPwrCtrlMask must always be set to
+	 * 0xFF, so we initialize the both arrays (DeviceRemovable and
+	 * PortPwrCtrlMask) to 0xFF.  Then we set the DeviceRemovable for each
+	 * set of ports that actually exist.
+	 */
+	memset(desc->u.hs.DeviceRemovable, 0xff,
+			sizeof(desc->u.hs.DeviceRemovable));
+	memset(desc->u.hs.PortPwrCtrlMask, 0xff,
+			sizeof(desc->u.hs.PortPwrCtrlMask));
+
+	for (i = 0; i < (ports + 1 + 7) / 8; i++)
+		memset(&desc->u.hs.DeviceRemovable[i], port_removable[i],
+				sizeof(__u8));
+}
+
+/* Fill in the USB 3.0 roothub descriptor */
+static void xhci_usb3_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci,
+		struct usb_hub_descriptor *desc)
+{
+	int ports;
+	u16 port_removable;
+	u32 portsc;
+	unsigned int i;
+	struct xhci_hub *rhub;
+
+	rhub = &xhci->usb3_rhub;
+	ports = rhub->num_ports;
+	xhci_common_hub_descriptor(xhci, desc, ports);
+	desc->bDescriptorType = USB_DT_SS_HUB;
+	desc->bDescLength = USB_DT_SS_HUB_SIZE;
+	desc->bPwrOn2PwrGood = 50;	/* usb 3.1 may fail if less than 100ms */
+
+	/* header decode latency should be zero for roothubs,
+	 * see section 4.23.5.2.
+	 */
+	desc->u.ss.bHubHdrDecLat = 0;
+	desc->u.ss.wHubDelay = 0;
+
+	port_removable = 0;
+	/* bit 0 is reserved, bit 1 is for port 1, etc. */
+	for (i = 0; i < ports; i++) {
+		portsc = readl(rhub->ports[i]->addr);
+		if (portsc & PORT_DEV_REMOVE)
+			port_removable |= 1 << (i + 1);
+	}
+
+	desc->u.ss.DeviceRemovable = cpu_to_le16(port_removable);
+}
+
+static void xhci_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci,
+		struct usb_hub_descriptor *desc)
+{
+
+	if (hcd->speed >= HCD_USB3)
+		xhci_usb3_hub_descriptor(hcd, xhci, desc);
+	else
+		xhci_usb2_hub_descriptor(hcd, xhci, desc);
+
+}
+
+static unsigned int xhci_port_speed(unsigned int port_status)
+{
+	if (DEV_LOWSPEED(port_status))
+		return USB_PORT_STAT_LOW_SPEED;
+	if (DEV_HIGHSPEED(port_status))
+		return USB_PORT_STAT_HIGH_SPEED;
+	/*
+	 * FIXME: Yes, we should check for full speed, but the core uses that as
+	 * a default in portspeed() in usb/core/hub.c (which is the only place
+	 * USB_PORT_STAT_*_SPEED is used).
+	 */
+	return 0;
+}
+
+/*
+ * These bits are Read Only (RO) and should be saved and written to the
+ * registers: 0, 3, 10:13, 30
+ * connect status, over-current status, port speed, and device removable.
+ * connect status and port speed are also sticky - meaning they're in
+ * the AUX well and they aren't changed by a hot, warm, or cold reset.
+ */
+#define	XHCI_PORT_RO	((1<<0) | (1<<3) | (0xf<<10) | (1<<30))
+/*
+ * These bits are RW; writing a 0 clears the bit, writing a 1 sets the bit:
+ * bits 5:8, 9, 14:15, 25:27
+ * link state, port power, port indicator state, "wake on" enable state
+ */
+#define XHCI_PORT_RWS	((0xf<<5) | (1<<9) | (0x3<<14) | (0x7<<25))
+/*
+ * These bits are RW; writing a 1 sets the bit, writing a 0 has no effect:
+ * bit 4 (port reset)
+ */
+#define	XHCI_PORT_RW1S	((1<<4))
+/*
+ * These bits are RW; writing a 1 clears the bit, writing a 0 has no effect:
+ * bits 1, 17, 18, 19, 20, 21, 22, 23
+ * port enable/disable, and
+ * change bits: connect, PED, warm port reset changed (reserved zero for USB 2.0 ports),
+ * over-current, reset, link state, and L1 change
+ */
+#define XHCI_PORT_RW1CS	((1<<1) | (0x7f<<17))
+/*
+ * Bit 16 is RW, and writing a '1' to it causes the link state control to be
+ * latched in
+ */
+#define	XHCI_PORT_RW	((1<<16))
+/*
+ * These bits are Reserved Zero (RsvdZ) and zero should be written to them:
+ * bits 2, 24, 28:31
+ */
+#define	XHCI_PORT_RZ	((1<<2) | (1<<24) | (0xf<<28))
+
+/*
+ * Given a port state, this function returns a value that would result in the
+ * port being in the same state, if the value was written to the port status
+ * control register.
+ * Save Read Only (RO) bits and save read/write bits where
+ * writing a 0 clears the bit and writing a 1 sets the bit (RWS).
+ * For all other types (RW1S, RW1CS, RW, and RZ), writing a '0' has no effect.
+ */
+u32 xhci_port_state_to_neutral(u32 state)
+{
+	/* Save read-only status and port state */
+	return (state & XHCI_PORT_RO) | (state & XHCI_PORT_RWS);
+}
+
+/*
+ * find slot id based on port number.
+ * @port: The one-based port number from one of the two split roothubs.
+ */
+int xhci_find_slot_id_by_port(struct usb_hcd *hcd, struct xhci_hcd *xhci,
+		u16 port)
+{
+	int slot_id;
+	int i;
+	enum usb_device_speed speed;
+
+	slot_id = 0;
+	for (i = 0; i < MAX_HC_SLOTS; i++) {
+		if (!xhci->devs[i] || !xhci->devs[i]->udev)
+			continue;
+		speed = xhci->devs[i]->udev->speed;
+		if (((speed >= USB_SPEED_SUPER) == (hcd->speed >= HCD_USB3))
+				&& xhci->devs[i]->fake_port == port) {
+			slot_id = i;
+			break;
+		}
+	}
+
+	return slot_id;
+}
+
+/*
+ * Stop device
+ * It issues stop endpoint command for EP 0 to 30. And wait the last command
+ * to complete.
+ * suspend will set to 1, if suspend bit need to set in command.
+ */
+static int xhci_stop_device(struct xhci_hcd *xhci, int slot_id, int suspend)
+{
+	struct xhci_virt_device *virt_dev;
+	struct xhci_command *cmd;
+	unsigned long flags;
+	int ret;
+	int i;
+
+	ret = 0;
+	virt_dev = xhci->devs[slot_id];
+	if (!virt_dev)
+		return -ENODEV;
+
+	trace_xhci_stop_device(virt_dev);
+
+	cmd = xhci_alloc_command(xhci, true, GFP_NOIO);
+	if (!cmd)
+		return -ENOMEM;
+
+	spin_lock_irqsave(&xhci->lock, flags);
+	for (i = LAST_EP_INDEX; i > 0; i--) {
+		if (virt_dev->eps[i].ring && virt_dev->eps[i].ring->dequeue) {
+			struct xhci_ep_ctx *ep_ctx;
+			struct xhci_command *command;
+
+			ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->out_ctx, i);
+
+			/* Check ep is running, required by AMD SNPS 3.1 xHC */
+			if (GET_EP_CTX_STATE(ep_ctx) != EP_STATE_RUNNING)
+				continue;
+
+			command = xhci_alloc_command(xhci, false, GFP_NOWAIT);
+			if (!command) {
+				spin_unlock_irqrestore(&xhci->lock, flags);
+				ret = -ENOMEM;
+				goto cmd_cleanup;
+			}
+
+			ret = xhci_queue_stop_endpoint(xhci, command, slot_id,
+						       i, suspend);
+			if (ret) {
+				spin_unlock_irqrestore(&xhci->lock, flags);
+				xhci_free_command(xhci, command);
+				goto cmd_cleanup;
+			}
+		}
+	}
+	ret = xhci_queue_stop_endpoint(xhci, cmd, slot_id, 0, suspend);
+	if (ret) {
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		goto cmd_cleanup;
+	}
+
+	xhci_ring_cmd_db(xhci);
+	spin_unlock_irqrestore(&xhci->lock, flags);
+
+	/* Wait for last stop endpoint command to finish */
+	wait_for_completion(cmd->completion);
+
+	if (cmd->status == COMP_COMMAND_ABORTED ||
+	    cmd->status == COMP_COMMAND_RING_STOPPED) {
+		xhci_warn(xhci, "Timeout while waiting for stop endpoint command\n");
+		ret = -ETIME;
+	}
+
+cmd_cleanup:
+	xhci_free_command(xhci, cmd);
+	return ret;
+}
+
+/*
+ * Ring device, it rings the all doorbells unconditionally.
+ */
+void xhci_ring_device(struct xhci_hcd *xhci, int slot_id)
+{
+	int i, s;
+	struct xhci_virt_ep *ep;
+
+	for (i = 0; i < LAST_EP_INDEX + 1; i++) {
+		ep = &xhci->devs[slot_id]->eps[i];
+
+		if (ep->ep_state & EP_HAS_STREAMS) {
+			for (s = 1; s < ep->stream_info->num_streams; s++)
+				xhci_ring_ep_doorbell(xhci, slot_id, i, s);
+		} else if (ep->ring && ep->ring->dequeue) {
+			xhci_ring_ep_doorbell(xhci, slot_id, i, 0);
+		}
+	}
+
+	return;
+}
+
+static void xhci_disable_port(struct usb_hcd *hcd, struct xhci_hcd *xhci,
+		u16 wIndex, __le32 __iomem *addr, u32 port_status)
+{
+	/* Don't allow the USB core to disable SuperSpeed ports. */
+	if (hcd->speed >= HCD_USB3) {
+		xhci_dbg(xhci, "Ignoring request to disable "
+				"SuperSpeed port.\n");
+		return;
+	}
+
+	if (xhci->quirks & XHCI_BROKEN_PORT_PED) {
+		xhci_dbg(xhci,
+			 "Broken Port Enabled/Disabled, ignoring port disable request.\n");
+		return;
+	}
+
+	/* Write 1 to disable the port */
+	writel(port_status | PORT_PE, addr);
+	port_status = readl(addr);
+	xhci_dbg(xhci, "disable port %d-%d, portsc: 0x%x\n",
+		 hcd->self.busnum, wIndex + 1, port_status);
+}
+
+static void xhci_clear_port_change_bit(struct xhci_hcd *xhci, u16 wValue,
+		u16 wIndex, __le32 __iomem *addr, u32 port_status)
+{
+	char *port_change_bit;
+	u32 status;
+
+	switch (wValue) {
+	case USB_PORT_FEAT_C_RESET:
+		status = PORT_RC;
+		port_change_bit = "reset";
+		break;
+	case USB_PORT_FEAT_C_BH_PORT_RESET:
+		status = PORT_WRC;
+		port_change_bit = "warm(BH) reset";
+		break;
+	case USB_PORT_FEAT_C_CONNECTION:
+		status = PORT_CSC;
+		port_change_bit = "connect";
+		break;
+	case USB_PORT_FEAT_C_OVER_CURRENT:
+		status = PORT_OCC;
+		port_change_bit = "over-current";
+		break;
+	case USB_PORT_FEAT_C_ENABLE:
+		status = PORT_PEC;
+		port_change_bit = "enable/disable";
+		break;
+	case USB_PORT_FEAT_C_SUSPEND:
+		status = PORT_PLC;
+		port_change_bit = "suspend/resume";
+		break;
+	case USB_PORT_FEAT_C_PORT_LINK_STATE:
+		status = PORT_PLC;
+		port_change_bit = "link state";
+		break;
+	case USB_PORT_FEAT_C_PORT_CONFIG_ERROR:
+		status = PORT_CEC;
+		port_change_bit = "config error";
+		break;
+	default:
+		/* Should never happen */
+		return;
+	}
+	/* Change bits are all write 1 to clear */
+	writel(port_status | status, addr);
+	port_status = readl(addr);
+
+	xhci_dbg(xhci, "clear port%d %s change, portsc: 0x%x\n",
+		 wIndex + 1, port_change_bit, port_status);
+}
+
+struct xhci_hub *xhci_get_rhub(struct usb_hcd *hcd)
+{
+	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
+
+	if (hcd->speed >= HCD_USB3)
+		return &xhci->usb3_rhub;
+	return &xhci->usb2_rhub;
+}
+
+/*
+ * xhci_set_port_power() must be called with xhci->lock held.
+ * It will release and re-aquire the lock while calling ACPI
+ * method.
+ */
+static void xhci_set_port_power(struct xhci_hcd *xhci, struct usb_hcd *hcd,
+				u16 index, bool on, unsigned long *flags)
+	__must_hold(&xhci->lock)
+{
+	struct xhci_hub *rhub;
+	struct xhci_port *port;
+	u32 temp;
+
+	rhub = xhci_get_rhub(hcd);
+	port = rhub->ports[index];
+	temp = readl(port->addr);
+
+	xhci_dbg(xhci, "set port power %d-%d %s, portsc: 0x%x\n",
+		 hcd->self.busnum, index + 1, on ? "ON" : "OFF", temp);
+
+	temp = xhci_port_state_to_neutral(temp);
+
+	if (on) {
+		/* Power on */
+		writel(temp | PORT_POWER, port->addr);
+		readl(port->addr);
+	} else {
+		/* Power off */
+		writel(temp & ~PORT_POWER, port->addr);
+	}
+
+	spin_unlock_irqrestore(&xhci->lock, *flags);
+	temp = usb_acpi_power_manageable(hcd->self.root_hub,
+					index);
+	if (temp)
+		usb_acpi_set_power_state(hcd->self.root_hub,
+			index, on);
+	spin_lock_irqsave(&xhci->lock, *flags);
+}
+
+static void xhci_port_set_test_mode(struct xhci_hcd *xhci,
+	u16 test_mode, u16 wIndex)
+{
+	u32 temp;
+	struct xhci_port *port;
+
+	/* xhci only supports test mode for usb2 ports */
+	port = xhci->usb2_rhub.ports[wIndex];
+	temp = readl(port->addr + PORTPMSC);
+	temp |= test_mode << PORT_TEST_MODE_SHIFT;
+	writel(temp, port->addr + PORTPMSC);
+	xhci->test_mode = test_mode;
+	if (test_mode == USB_TEST_FORCE_ENABLE)
+		xhci_start(xhci);
+}
+
+static int xhci_enter_test_mode(struct xhci_hcd *xhci,
+				u16 test_mode, u16 wIndex, unsigned long *flags)
+	__must_hold(&xhci->lock)
+{
+	int i, retval;
+
+	/* Disable all Device Slots */
+	xhci_dbg(xhci, "Disable all slots\n");
+	spin_unlock_irqrestore(&xhci->lock, *flags);
+	for (i = 1; i <= HCS_MAX_SLOTS(xhci->hcs_params1); i++) {
+		if (!xhci->devs[i])
+			continue;
+
+		retval = xhci_disable_slot(xhci, i);
+		xhci_free_virt_device(xhci, i);
+		if (retval)
+			xhci_err(xhci, "Failed to disable slot %d, %d. Enter test mode anyway\n",
+				 i, retval);
+	}
+	spin_lock_irqsave(&xhci->lock, *flags);
+	/* Put all ports to the Disable state by clear PP */
+	xhci_dbg(xhci, "Disable all port (PP = 0)\n");
+	/* Power off USB3 ports*/
+	for (i = 0; i < xhci->usb3_rhub.num_ports; i++)
+		xhci_set_port_power(xhci, xhci->shared_hcd, i, false, flags);
+	/* Power off USB2 ports*/
+	for (i = 0; i < xhci->usb2_rhub.num_ports; i++)
+		xhci_set_port_power(xhci, xhci->main_hcd, i, false, flags);
+	/* Stop the controller */
+	xhci_dbg(xhci, "Stop controller\n");
+	retval = xhci_halt(xhci);
+	if (retval)
+		return retval;
+	/* Disable runtime PM for test mode */
+	pm_runtime_forbid(xhci_to_hcd(xhci)->self.controller);
+	/* Set PORTPMSC.PTC field to enter selected test mode */
+	/* Port is selected by wIndex. port_id = wIndex + 1 */
+	xhci_dbg(xhci, "Enter Test Mode: %d, Port_id=%d\n",
+					test_mode, wIndex + 1);
+	xhci_port_set_test_mode(xhci, test_mode, wIndex);
+	return retval;
+}
+
+static int xhci_exit_test_mode(struct xhci_hcd *xhci)
+{
+	int retval;
+
+	if (!xhci->test_mode) {
+		xhci_err(xhci, "Not in test mode, do nothing.\n");
+		return 0;
+	}
+	if (xhci->test_mode == USB_TEST_FORCE_ENABLE &&
+		!(xhci->xhc_state & XHCI_STATE_HALTED)) {
+		retval = xhci_halt(xhci);
+		if (retval)
+			return retval;
+	}
+	pm_runtime_allow(xhci_to_hcd(xhci)->self.controller);
+	xhci->test_mode = 0;
+	return xhci_reset(xhci, XHCI_RESET_SHORT_USEC);
+}
+
+void xhci_set_link_state(struct xhci_hcd *xhci, struct xhci_port *port,
+			 u32 link_state)
+{
+	u32 temp;
+	u32 portsc;
+
+	portsc = readl(port->addr);
+	temp = xhci_port_state_to_neutral(portsc);
+	temp &= ~PORT_PLS_MASK;
+	temp |= PORT_LINK_STROBE | link_state;
+	writel(temp, port->addr);
+
+	xhci_dbg(xhci, "Set port %d-%d link state, portsc: 0x%x, write 0x%x",
+		 port->rhub->hcd->self.busnum, port->hcd_portnum + 1,
+		 portsc, temp);
+}
+
+static void xhci_set_remote_wake_mask(struct xhci_hcd *xhci,
+				      struct xhci_port *port, u16 wake_mask)
+{
+	u32 temp;
+
+	temp = readl(port->addr);
+	temp = xhci_port_state_to_neutral(temp);
+
+	if (wake_mask & USB_PORT_FEAT_REMOTE_WAKE_CONNECT)
+		temp |= PORT_WKCONN_E;
+	else
+		temp &= ~PORT_WKCONN_E;
+
+	if (wake_mask & USB_PORT_FEAT_REMOTE_WAKE_DISCONNECT)
+		temp |= PORT_WKDISC_E;
+	else
+		temp &= ~PORT_WKDISC_E;
+
+	if (wake_mask & USB_PORT_FEAT_REMOTE_WAKE_OVER_CURRENT)
+		temp |= PORT_WKOC_E;
+	else
+		temp &= ~PORT_WKOC_E;
+
+	writel(temp, port->addr);
+}
+
+/* Test and clear port RWC bit */
+void xhci_test_and_clear_bit(struct xhci_hcd *xhci, struct xhci_port *port,
+			     u32 port_bit)
+{
+	u32 temp;
+
+	temp = readl(port->addr);
+	if (temp & port_bit) {
+		temp = xhci_port_state_to_neutral(temp);
+		temp |= port_bit;
+		writel(temp, port->addr);
+	}
+}
+
+/* Updates Link Status for super Speed port */
+static void xhci_hub_report_usb3_link_state(struct xhci_hcd *xhci,
+		u32 *status, u32 status_reg)
+{
+	u32 pls = status_reg & PORT_PLS_MASK;
+
+	/* When the CAS bit is set then warm reset
+	 * should be performed on port
+	 */
+	if (status_reg & PORT_CAS) {
+		/* The CAS bit can be set while the port is
+		 * in any link state.
+		 * Only roothubs have CAS bit, so we
+		 * pretend to be in compliance mode
+		 * unless we're already in compliance
+		 * or the inactive state.
+		 */
+		if (pls != USB_SS_PORT_LS_COMP_MOD &&
+		    pls != USB_SS_PORT_LS_SS_INACTIVE) {
+			pls = USB_SS_PORT_LS_COMP_MOD;
+		}
+		/* Return also connection bit -
+		 * hub state machine resets port
+		 * when this bit is set.
+		 */
+		pls |= USB_PORT_STAT_CONNECTION;
+	} else {
+		/*
+		 * Resume state is an xHCI internal state.  Do not report it to
+		 * usb core, instead, pretend to be U3, thus usb core knows
+		 * it's not ready for transfer.
+		 */
+		if (pls == XDEV_RESUME) {
+			*status |= USB_SS_PORT_LS_U3;
+			return;
+		}
+
+		/*
+		 * If CAS bit isn't set but the Port is already at
+		 * Compliance Mode, fake a connection so the USB core
+		 * notices the Compliance state and resets the port.
+		 * This resolves an issue generated by the SN65LVPE502CP
+		 * in which sometimes the port enters compliance mode
+		 * caused by a delay on the host-device negotiation.
+		 */
+		if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
+				(pls == USB_SS_PORT_LS_COMP_MOD))
+			pls |= USB_PORT_STAT_CONNECTION;
+	}
+
+	/* update status field */
+	*status |= pls;
+}
+
+/*
+ * Function for Compliance Mode Quirk.
+ *
+ * This Function verifies if all xhc USB3 ports have entered U0, if so,
+ * the compliance mode timer is deleted. A port won't enter
+ * compliance mode if it has previously entered U0.
+ */
+static void xhci_del_comp_mod_timer(struct xhci_hcd *xhci, u32 status,
+				    u16 wIndex)
+{
+	u32 all_ports_seen_u0 = ((1 << xhci->usb3_rhub.num_ports) - 1);
+	bool port_in_u0 = ((status & PORT_PLS_MASK) == XDEV_U0);
+
+	if (!(xhci->quirks & XHCI_COMP_MODE_QUIRK))
+		return;
+
+	if ((xhci->port_status_u0 != all_ports_seen_u0) && port_in_u0) {
+		xhci->port_status_u0 |= 1 << wIndex;
+		if (xhci->port_status_u0 == all_ports_seen_u0) {
+			del_timer_sync(&xhci->comp_mode_recovery_timer);
+			xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+				"All USB3 ports have entered U0 already!");
+			xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+				"Compliance Mode Recovery Timer Deleted.");
+		}
+	}
+}
+
+static int xhci_handle_usb2_port_link_resume(struct xhci_port *port,
+					     u32 portsc,
+					     unsigned long *flags)
+{
+	struct xhci_bus_state *bus_state;
+	struct xhci_hcd	*xhci;
+	struct usb_hcd *hcd;
+	int slot_id;
+	u32 wIndex;
+
+	hcd = port->rhub->hcd;
+	bus_state = &port->rhub->bus_state;
+	xhci = hcd_to_xhci(hcd);
+	wIndex = port->hcd_portnum;
+
+	if ((portsc & PORT_RESET) || !(portsc & PORT_PE)) {
+		return -EINVAL;
+	}
+	/* did port event handler already start resume timing? */
+	if (!port->resume_timestamp) {
+		/* If not, maybe we are in a host initated resume? */
+		if (test_bit(wIndex, &bus_state->resuming_ports)) {
+			/* Host initated resume doesn't time the resume
+			 * signalling using resume_done[].
+			 * It manually sets RESUME state, sleeps 20ms
+			 * and sets U0 state. This should probably be
+			 * changed, but not right now.
+			 */
+		} else {
+			/* port resume was discovered now and here,
+			 * start resume timing
+			 */
+			unsigned long timeout = jiffies +
+				msecs_to_jiffies(USB_RESUME_TIMEOUT);
+
+			set_bit(wIndex, &bus_state->resuming_ports);
+			port->resume_timestamp = timeout;
+			mod_timer(&hcd->rh_timer, timeout);
+			usb_hcd_start_port_resume(&hcd->self, wIndex);
+		}
+	/* Has resume been signalled for USB_RESUME_TIME yet? */
+	} else if (time_after_eq(jiffies, port->resume_timestamp)) {
+		int time_left;
+
+		xhci_dbg(xhci, "resume USB2 port %d-%d\n",
+			 hcd->self.busnum, wIndex + 1);
+
+		port->resume_timestamp = 0;
+		clear_bit(wIndex, &bus_state->resuming_ports);
+
+		reinit_completion(&port->rexit_done);
+		port->rexit_active = true;
+
+		xhci_test_and_clear_bit(xhci, port, PORT_PLC);
+		xhci_set_link_state(xhci, port, XDEV_U0);
+
+		spin_unlock_irqrestore(&xhci->lock, *flags);
+		time_left = wait_for_completion_timeout(
+			&port->rexit_done,
+			msecs_to_jiffies(XHCI_MAX_REXIT_TIMEOUT_MS));
+		spin_lock_irqsave(&xhci->lock, *flags);
+
+		if (time_left) {
+			slot_id = xhci_find_slot_id_by_port(hcd, xhci,
+							    wIndex + 1);
+			if (!slot_id) {
+				xhci_dbg(xhci, "slot_id is zero\n");
+				return -ENODEV;
+			}
+			xhci_ring_device(xhci, slot_id);
+		} else {
+			int port_status = readl(port->addr);
+
+			xhci_warn(xhci, "Port resume timed out, port %d-%d: 0x%x\n",
+				  hcd->self.busnum, wIndex + 1, port_status);
+			/*
+			 * keep rexit_active set if U0 transition failed so we
+			 * know to report PORT_STAT_SUSPEND status back to
+			 * usbcore. It will be cleared later once the port is
+			 * out of RESUME/U3 state
+			 */
+		}
+
+		usb_hcd_end_port_resume(&hcd->self, wIndex);
+		bus_state->port_c_suspend |= 1 << wIndex;
+		bus_state->suspended_ports &= ~(1 << wIndex);
+	}
+
+	return 0;
+}
+
+static u32 xhci_get_ext_port_status(u32 raw_port_status, u32 port_li)
+{
+	u32 ext_stat = 0;
+	int speed_id;
+
+	/* only support rx and tx lane counts of 1 in usb3.1 spec */
+	speed_id = DEV_PORT_SPEED(raw_port_status);
+	ext_stat |= speed_id;		/* bits 3:0, RX speed id */
+	ext_stat |= speed_id << 4;	/* bits 7:4, TX speed id */
+
+	ext_stat |= PORT_RX_LANES(port_li) << 8;  /* bits 11:8 Rx lane count */
+	ext_stat |= PORT_TX_LANES(port_li) << 12; /* bits 15:12 Tx lane count */
+
+	return ext_stat;
+}
+
+static void xhci_get_usb3_port_status(struct xhci_port *port, u32 *status,
+				      u32 portsc)
+{
+	struct xhci_bus_state *bus_state;
+	struct xhci_hcd	*xhci;
+	struct usb_hcd *hcd;
+	u32 link_state;
+	u32 portnum;
+
+	bus_state = &port->rhub->bus_state;
+	xhci = hcd_to_xhci(port->rhub->hcd);
+	hcd = port->rhub->hcd;
+	link_state = portsc & PORT_PLS_MASK;
+	portnum = port->hcd_portnum;
+
+	/* USB3 specific wPortChange bits
+	 *
+	 * Port link change with port in resume state should not be
+	 * reported to usbcore, as this is an internal state to be
+	 * handled by xhci driver. Reporting PLC to usbcore may
+	 * cause usbcore clearing PLC first and port change event
+	 * irq won't be generated.
+	 */
+
+	if (portsc & PORT_PLC && (link_state != XDEV_RESUME))
+		*status |= USB_PORT_STAT_C_LINK_STATE << 16;
+	if (portsc & PORT_WRC)
+		*status |= USB_PORT_STAT_C_BH_RESET << 16;
+	if (portsc & PORT_CEC)
+		*status |= USB_PORT_STAT_C_CONFIG_ERROR << 16;
+
+	/* USB3 specific wPortStatus bits */
+	if (portsc & PORT_POWER)
+		*status |= USB_SS_PORT_STAT_POWER;
+
+	/* no longer suspended or resuming */
+	if (link_state != XDEV_U3 &&
+	    link_state != XDEV_RESUME &&
+	    link_state != XDEV_RECOVERY) {
+		/* remote wake resume signaling complete */
+		if (bus_state->port_remote_wakeup & (1 << portnum)) {
+			bus_state->port_remote_wakeup &= ~(1 << portnum);
+			usb_hcd_end_port_resume(&hcd->self, portnum);
+		}
+		bus_state->suspended_ports &= ~(1 << portnum);
+	}
+
+	xhci_hub_report_usb3_link_state(xhci, status, portsc);
+	xhci_del_comp_mod_timer(xhci, portsc, portnum);
+}
+
+static void xhci_get_usb2_port_status(struct xhci_port *port, u32 *status,
+				      u32 portsc, unsigned long *flags)
+{
+	struct xhci_bus_state *bus_state;
+	u32 link_state;
+	u32 portnum;
+	int err;
+
+	bus_state = &port->rhub->bus_state;
+	link_state = portsc & PORT_PLS_MASK;
+	portnum = port->hcd_portnum;
+
+	/* USB2 wPortStatus bits */
+	if (portsc & PORT_POWER) {
+		*status |= USB_PORT_STAT_POWER;
+
+		/* link state is only valid if port is powered */
+		if (link_state == XDEV_U3)
+			*status |= USB_PORT_STAT_SUSPEND;
+		if (link_state == XDEV_U2)
+			*status |= USB_PORT_STAT_L1;
+		if (link_state == XDEV_U0) {
+			if (bus_state->suspended_ports & (1 << portnum)) {
+				bus_state->suspended_ports &= ~(1 << portnum);
+				bus_state->port_c_suspend |= 1 << portnum;
+			}
+		}
+		if (link_state == XDEV_RESUME) {
+			err = xhci_handle_usb2_port_link_resume(port, portsc,
+								flags);
+			if (err < 0)
+				*status = 0xffffffff;
+			else if (port->resume_timestamp || port->rexit_active)
+				*status |= USB_PORT_STAT_SUSPEND;
+		}
+	}
+
+	/*
+	 * Clear usb2 resume signalling variables if port is no longer suspended
+	 * or resuming. Port either resumed to U0/U1/U2, disconnected, or in a
+	 * error state. Resume related variables should be cleared in all those cases.
+	 */
+	if (link_state != XDEV_U3 && link_state != XDEV_RESUME) {
+		if (port->resume_timestamp ||
+		    test_bit(portnum, &bus_state->resuming_ports)) {
+			port->resume_timestamp = 0;
+			clear_bit(portnum, &bus_state->resuming_ports);
+			usb_hcd_end_port_resume(&port->rhub->hcd->self, portnum);
+		}
+		port->rexit_active = 0;
+		bus_state->suspended_ports &= ~(1 << portnum);
+	}
+}
+
+/*
+ * Converts a raw xHCI port status into the format that external USB 2.0 or USB
+ * 3.0 hubs use.
+ *
+ * Possible side effects:
+ *  - Mark a port as being done with device resume,
+ *    and ring the endpoint doorbells.
+ *  - Stop the Synopsys redriver Compliance Mode polling.
+ *  - Drop and reacquire the xHCI lock, in order to wait for port resume.
+ */
+static u32 xhci_get_port_status(struct usb_hcd *hcd,
+		struct xhci_bus_state *bus_state,
+	u16 wIndex, u32 raw_port_status,
+		unsigned long *flags)
+	__releases(&xhci->lock)
+	__acquires(&xhci->lock)
+{
+	u32 status = 0;
+	struct xhci_hub *rhub;
+	struct xhci_port *port;
+
+	rhub = xhci_get_rhub(hcd);
+	port = rhub->ports[wIndex];
+
+	/* common wPortChange bits */
+	if (raw_port_status & PORT_CSC)
+		status |= USB_PORT_STAT_C_CONNECTION << 16;
+	if (raw_port_status & PORT_PEC)
+		status |= USB_PORT_STAT_C_ENABLE << 16;
+	if ((raw_port_status & PORT_OCC))
+		status |= USB_PORT_STAT_C_OVERCURRENT << 16;
+	if ((raw_port_status & PORT_RC))
+		status |= USB_PORT_STAT_C_RESET << 16;
+
+	/* common wPortStatus bits */
+	if (raw_port_status & PORT_CONNECT) {
+		status |= USB_PORT_STAT_CONNECTION;
+		status |= xhci_port_speed(raw_port_status);
+	}
+	if (raw_port_status & PORT_PE)
+		status |= USB_PORT_STAT_ENABLE;
+	if (raw_port_status & PORT_OC)
+		status |= USB_PORT_STAT_OVERCURRENT;
+	if (raw_port_status & PORT_RESET)
+		status |= USB_PORT_STAT_RESET;
+
+	/* USB2 and USB3 specific bits, including Port Link State */
+	if (hcd->speed >= HCD_USB3)
+		xhci_get_usb3_port_status(port, &status, raw_port_status);
+	else
+		xhci_get_usb2_port_status(port, &status, raw_port_status,
+					  flags);
+
+	if (bus_state->port_c_suspend & (1 << wIndex))
+		status |= USB_PORT_STAT_C_SUSPEND << 16;
+
+	return status;
+}
+
+int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+		u16 wIndex, char *buf, u16 wLength)
+{
+	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
+	int max_ports;
+	unsigned long flags;
+	u32 temp, status;
+	int retval = 0;
+	int slot_id;
+	struct xhci_bus_state *bus_state;
+	u16 link_state = 0;
+	u16 wake_mask = 0;
+	u16 timeout = 0;
+	u16 test_mode = 0;
+	struct xhci_hub *rhub;
+	struct xhci_port **ports;
+	struct xhci_port *port;
+	int portnum1;
+
+	rhub = xhci_get_rhub(hcd);
+	ports = rhub->ports;
+	max_ports = rhub->num_ports;
+	bus_state = &rhub->bus_state;
+	portnum1 = wIndex & 0xff;
+
+	spin_lock_irqsave(&xhci->lock, flags);
+	switch (typeReq) {
+	case GetHubStatus:
+		/* No power source, over-current reported per port */
+		memset(buf, 0, 4);
+		break;
+	case GetHubDescriptor:
+		/* Check to make sure userspace is asking for the USB 3.0 hub
+		 * descriptor for the USB 3.0 roothub.  If not, we stall the
+		 * endpoint, like external hubs do.
+		 */
+		if (hcd->speed >= HCD_USB3 &&
+				(wLength < USB_DT_SS_HUB_SIZE ||
+				 wValue != (USB_DT_SS_HUB << 8))) {
+			xhci_dbg(xhci, "Wrong hub descriptor type for "
+					"USB 3.0 roothub.\n");
+			goto error;
+		}
+		xhci_hub_descriptor(hcd, xhci,
+				(struct usb_hub_descriptor *) buf);
+		break;
+	case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
+		if ((wValue & 0xff00) != (USB_DT_BOS << 8))
+			goto error;
+
+		if (hcd->speed < HCD_USB3)
+			goto error;
+
+		retval = xhci_create_usb3_bos_desc(xhci, buf, wLength);
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		return retval;
+	case GetPortStatus:
+		if (!portnum1 || portnum1 > max_ports)
+			goto error;
+
+		wIndex--;
+		port = ports[portnum1 - 1];
+		temp = readl(port->addr);
+		if (temp == ~(u32)0) {
+			xhci_hc_died(xhci);
+			retval = -ENODEV;
+			break;
+		}
+		trace_xhci_get_port_status(wIndex, temp);
+		status = xhci_get_port_status(hcd, bus_state, wIndex, temp,
+					      &flags);
+		if (status == 0xffffffff)
+			goto error;
+
+		xhci_dbg(xhci, "Get port status %d-%d read: 0x%x, return 0x%x",
+			 hcd->self.busnum, portnum1, temp, status);
+
+		put_unaligned(cpu_to_le32(status), (__le32 *) buf);
+		/* if USB 3.1 extended port status return additional 4 bytes */
+		if (wValue == 0x02) {
+			u32 port_li;
+
+			if (hcd->speed < HCD_USB31 || wLength != 8) {
+				xhci_err(xhci, "get ext port status invalid parameter\n");
+				retval = -EINVAL;
+				break;
+			}
+			port_li = readl(port->addr + PORTLI);
+			status = xhci_get_ext_port_status(temp, port_li);
+			put_unaligned_le32(status, &buf[4]);
+		}
+		break;
+	case SetPortFeature:
+		if (wValue == USB_PORT_FEAT_LINK_STATE)
+			link_state = (wIndex & 0xff00) >> 3;
+		if (wValue == USB_PORT_FEAT_REMOTE_WAKE_MASK)
+			wake_mask = wIndex & 0xff00;
+		if (wValue == USB_PORT_FEAT_TEST)
+			test_mode = (wIndex & 0xff00) >> 8;
+		/* The MSB of wIndex is the U1/U2 timeout */
+		timeout = (wIndex & 0xff00) >> 8;
+
+		wIndex &= 0xff;
+		if (!portnum1 || portnum1 > max_ports)
+			goto error;
+
+		port = ports[portnum1 - 1];
+		wIndex--;
+		temp = readl(port->addr);
+		if (temp == ~(u32)0) {
+			xhci_hc_died(xhci);
+			retval = -ENODEV;
+			break;
+		}
+		temp = xhci_port_state_to_neutral(temp);
+		/* FIXME: What new port features do we need to support? */
+		switch (wValue) {
+		case USB_PORT_FEAT_SUSPEND:
+			temp = readl(port->addr);
+			if ((temp & PORT_PLS_MASK) != XDEV_U0) {
+				/* Resume the port to U0 first */
+				xhci_set_link_state(xhci, port, XDEV_U0);
+				spin_unlock_irqrestore(&xhci->lock, flags);
+				msleep(10);
+				spin_lock_irqsave(&xhci->lock, flags);
+			}
+			/* In spec software should not attempt to suspend
+			 * a port unless the port reports that it is in the
+			 * enabled (PED = ‘1’,PLS < ‘3’) state.
+			 */
+			temp = readl(port->addr);
+			if ((temp & PORT_PE) == 0 || (temp & PORT_RESET)
+				|| (temp & PORT_PLS_MASK) >= XDEV_U3) {
+				xhci_warn(xhci, "USB core suspending port %d-%d not in U0/U1/U2\n",
+					  hcd->self.busnum, portnum1);
+				goto error;
+			}
+
+			slot_id = xhci_find_slot_id_by_port(hcd, xhci,
+							    portnum1);
+			if (!slot_id) {
+				xhci_warn(xhci, "slot_id is zero\n");
+				goto error;
+			}
+			/* unlock to execute stop endpoint commands */
+			spin_unlock_irqrestore(&xhci->lock, flags);
+			xhci_stop_device(xhci, slot_id, 1);
+			spin_lock_irqsave(&xhci->lock, flags);
+
+			xhci_set_link_state(xhci, port, XDEV_U3);
+
+			spin_unlock_irqrestore(&xhci->lock, flags);
+			msleep(10); /* wait device to enter */
+			spin_lock_irqsave(&xhci->lock, flags);
+
+			temp = readl(port->addr);
+			bus_state->suspended_ports |= 1 << wIndex;
+			break;
+		case USB_PORT_FEAT_LINK_STATE:
+			temp = readl(port->addr);
+			/* Disable port */
+			if (link_state == USB_SS_PORT_LS_SS_DISABLED) {
+				xhci_dbg(xhci, "Disable port %d-%d\n",
+					 hcd->self.busnum, portnum1);
+				temp = xhci_port_state_to_neutral(temp);
+				/*
+				 * Clear all change bits, so that we get a new
+				 * connection event.
+				 */
+				temp |= PORT_CSC | PORT_PEC | PORT_WRC |
+					PORT_OCC | PORT_RC | PORT_PLC |
+					PORT_CEC;
+				writel(temp | PORT_PE, port->addr);
+				temp = readl(port->addr);
+				break;
+			}
+
+			/* Put link in RxDetect (enable port) */
+			if (link_state == USB_SS_PORT_LS_RX_DETECT) {
+				xhci_dbg(xhci, "Enable port %d-%d\n",
+					 hcd->self.busnum, portnum1);
+				xhci_set_link_state(xhci, port,	link_state);
+				temp = readl(port->addr);
+				break;
+			}
+
+			/*
+			 * For xHCI 1.1 according to section 4.19.1.2.4.1 a
+			 * root hub port's transition to compliance mode upon
+			 * detecting LFPS timeout may be controlled by an
+			 * Compliance Transition Enabled (CTE) flag (not
+			 * software visible). This flag is set by writing 0xA
+			 * to PORTSC PLS field which will allow transition to
+			 * compliance mode the next time LFPS timeout is
+			 * encountered. A warm reset will clear it.
+			 *
+			 * The CTE flag is only supported if the HCCPARAMS2 CTC
+			 * flag is set, otherwise, the compliance substate is
+			 * automatically entered as on 1.0 and prior.
+			 */
+			if (link_state == USB_SS_PORT_LS_COMP_MOD) {
+				if (!HCC2_CTC(xhci->hcc_params2)) {
+					xhci_dbg(xhci, "CTC flag is 0, port already supports entering compliance mode\n");
+					break;
+				}
+
+				if ((temp & PORT_CONNECT)) {
+					xhci_warn(xhci, "Can't set compliance mode when port is connected\n");
+					goto error;
+				}
+
+				xhci_dbg(xhci, "Enable compliance mode transition for port %d-%d\n",
+					 hcd->self.busnum, portnum1);
+				xhci_set_link_state(xhci, port, link_state);
+
+				temp = readl(port->addr);
+				break;
+			}
+			/* Port must be enabled */
+			if (!(temp & PORT_PE)) {
+				retval = -ENODEV;
+				break;
+			}
+			/* Can't set port link state above '3' (U3) */
+			if (link_state > USB_SS_PORT_LS_U3) {
+				xhci_warn(xhci, "Cannot set port %d-%d link state %d\n",
+					  hcd->self.busnum, portnum1, link_state);
+				goto error;
+			}
+
+			/*
+			 * set link to U0, steps depend on current link state.
+			 * U3: set link to U0 and wait for u3exit completion.
+			 * U1/U2:  no PLC complete event, only set link to U0.
+			 * Resume/Recovery: device initiated U0, only wait for
+			 * completion
+			 */
+			if (link_state == USB_SS_PORT_LS_U0) {
+				u32 pls = temp & PORT_PLS_MASK;
+				bool wait_u0 = false;
+
+				/* already in U0 */
+				if (pls == XDEV_U0)
+					break;
+				if (pls == XDEV_U3 ||
+				    pls == XDEV_RESUME ||
+				    pls == XDEV_RECOVERY) {
+					wait_u0 = true;
+					reinit_completion(&port->u3exit_done);
+				}
+				if (pls <= XDEV_U3) /* U1, U2, U3 */
+					xhci_set_link_state(xhci, port, USB_SS_PORT_LS_U0);
+				if (!wait_u0) {
+					if (pls > XDEV_U3)
+						goto error;
+					break;
+				}
+				spin_unlock_irqrestore(&xhci->lock, flags);
+				if (!wait_for_completion_timeout(&port->u3exit_done,
+								 msecs_to_jiffies(500)))
+					xhci_dbg(xhci, "missing U0 port change event for port %d-%d\n",
+						 hcd->self.busnum, portnum1);
+				spin_lock_irqsave(&xhci->lock, flags);
+				temp = readl(port->addr);
+				break;
+			}
+
+			if (link_state == USB_SS_PORT_LS_U3) {
+				int retries = 16;
+				slot_id = xhci_find_slot_id_by_port(hcd, xhci,
+								    portnum1);
+				if (slot_id) {
+					/* unlock to execute stop endpoint
+					 * commands */
+					spin_unlock_irqrestore(&xhci->lock,
+								flags);
+					xhci_stop_device(xhci, slot_id, 1);
+					spin_lock_irqsave(&xhci->lock, flags);
+				}
+				xhci_set_link_state(xhci, port, USB_SS_PORT_LS_U3);
+				spin_unlock_irqrestore(&xhci->lock, flags);
+				while (retries--) {
+					usleep_range(4000, 8000);
+					temp = readl(port->addr);
+					if ((temp & PORT_PLS_MASK) == XDEV_U3)
+						break;
+				}
+				spin_lock_irqsave(&xhci->lock, flags);
+				temp = readl(port->addr);
+				bus_state->suspended_ports |= 1 << wIndex;
+			}
+			break;
+		case USB_PORT_FEAT_POWER:
+			/*
+			 * Turn on ports, even if there isn't per-port switching.
+			 * HC will report connect events even before this is set.
+			 * However, hub_wq will ignore the roothub events until
+			 * the roothub is registered.
+			 */
+			xhci_set_port_power(xhci, hcd, wIndex, true, &flags);
+			break;
+		case USB_PORT_FEAT_RESET:
+			temp = (temp | PORT_RESET);
+			writel(temp, port->addr);
+
+			temp = readl(port->addr);
+			xhci_dbg(xhci, "set port reset, actual port %d-%d status  = 0x%x\n",
+				 hcd->self.busnum, portnum1, temp);
+			break;
+		case USB_PORT_FEAT_REMOTE_WAKE_MASK:
+			xhci_set_remote_wake_mask(xhci, port, wake_mask);
+			temp = readl(port->addr);
+			xhci_dbg(xhci, "set port remote wake mask, actual port %d-%d status  = 0x%x\n",
+				 hcd->self.busnum, portnum1, temp);
+			break;
+		case USB_PORT_FEAT_BH_PORT_RESET:
+			temp |= PORT_WR;
+			writel(temp, port->addr);
+			temp = readl(port->addr);
+			break;
+		case USB_PORT_FEAT_U1_TIMEOUT:
+			if (hcd->speed < HCD_USB3)
+				goto error;
+			temp = readl(port->addr + PORTPMSC);
+			temp &= ~PORT_U1_TIMEOUT_MASK;
+			temp |= PORT_U1_TIMEOUT(timeout);
+			writel(temp, port->addr + PORTPMSC);
+			break;
+		case USB_PORT_FEAT_U2_TIMEOUT:
+			if (hcd->speed < HCD_USB3)
+				goto error;
+			temp = readl(port->addr + PORTPMSC);
+			temp &= ~PORT_U2_TIMEOUT_MASK;
+			temp |= PORT_U2_TIMEOUT(timeout);
+			writel(temp, port->addr + PORTPMSC);
+			break;
+		case USB_PORT_FEAT_TEST:
+			/* 4.19.6 Port Test Modes (USB2 Test Mode) */
+			if (hcd->speed != HCD_USB2)
+				goto error;
+			if (test_mode > USB_TEST_FORCE_ENABLE ||
+			    test_mode < USB_TEST_J)
+				goto error;
+			retval = xhci_enter_test_mode(xhci, test_mode, wIndex,
+						      &flags);
+			break;
+		default:
+			goto error;
+		}
+		/* unblock any posted writes */
+		temp = readl(port->addr);
+		break;
+	case ClearPortFeature:
+		if (!portnum1 || portnum1 > max_ports)
+			goto error;
+
+		port = ports[portnum1 - 1];
+
+		wIndex--;
+		temp = readl(port->addr);
+		if (temp == ~(u32)0) {
+			xhci_hc_died(xhci);
+			retval = -ENODEV;
+			break;
+		}
+		/* FIXME: What new port features do we need to support? */
+		temp = xhci_port_state_to_neutral(temp);
+		switch (wValue) {
+		case USB_PORT_FEAT_SUSPEND:
+			temp = readl(port->addr);
+			xhci_dbg(xhci, "clear USB_PORT_FEAT_SUSPEND\n");
+			xhci_dbg(xhci, "PORTSC %04x\n", temp);
+			if (temp & PORT_RESET)
+				goto error;
+			if ((temp & PORT_PLS_MASK) == XDEV_U3) {
+				if ((temp & PORT_PE) == 0)
+					goto error;
+
+				set_bit(wIndex, &bus_state->resuming_ports);
+				usb_hcd_start_port_resume(&hcd->self, wIndex);
+				xhci_set_link_state(xhci, port, XDEV_RESUME);
+				spin_unlock_irqrestore(&xhci->lock, flags);
+				msleep(USB_RESUME_TIMEOUT);
+				spin_lock_irqsave(&xhci->lock, flags);
+				xhci_set_link_state(xhci, port, XDEV_U0);
+				clear_bit(wIndex, &bus_state->resuming_ports);
+				usb_hcd_end_port_resume(&hcd->self, wIndex);
+			}
+			bus_state->port_c_suspend |= 1 << wIndex;
+
+			slot_id = xhci_find_slot_id_by_port(hcd, xhci,
+					portnum1);
+			if (!slot_id) {
+				xhci_dbg(xhci, "slot_id is zero\n");
+				goto error;
+			}
+			xhci_ring_device(xhci, slot_id);
+			break;
+		case USB_PORT_FEAT_C_SUSPEND:
+			bus_state->port_c_suspend &= ~(1 << wIndex);
+			fallthrough;
+		case USB_PORT_FEAT_C_RESET:
+		case USB_PORT_FEAT_C_BH_PORT_RESET:
+		case USB_PORT_FEAT_C_CONNECTION:
+		case USB_PORT_FEAT_C_OVER_CURRENT:
+		case USB_PORT_FEAT_C_ENABLE:
+		case USB_PORT_FEAT_C_PORT_LINK_STATE:
+		case USB_PORT_FEAT_C_PORT_CONFIG_ERROR:
+			xhci_clear_port_change_bit(xhci, wValue, wIndex,
+					port->addr, temp);
+			break;
+		case USB_PORT_FEAT_ENABLE:
+			xhci_disable_port(hcd, xhci, wIndex,
+					port->addr, temp);
+			break;
+		case USB_PORT_FEAT_POWER:
+			xhci_set_port_power(xhci, hcd, wIndex, false, &flags);
+			break;
+		case USB_PORT_FEAT_TEST:
+			retval = xhci_exit_test_mode(xhci);
+			break;
+		default:
+			goto error;
+		}
+		break;
+	default:
+error:
+		/* "stall" on error */
+		retval = -EPIPE;
+	}
+	spin_unlock_irqrestore(&xhci->lock, flags);
+	return retval;
+}
+
+/*
+ * Returns 0 if the status hasn't changed, or the number of bytes in buf.
+ * Ports are 0-indexed from the HCD point of view,
+ * and 1-indexed from the USB core pointer of view.
+ *
+ * Note that the status change bits will be cleared as soon as a port status
+ * change event is generated, so we use the saved status from that event.
+ */
+int xhci_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+	unsigned long flags;
+	u32 temp, status;
+	u32 mask;
+	int i, retval;
+	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
+	int max_ports;
+	struct xhci_bus_state *bus_state;
+	bool reset_change = false;
+	struct xhci_hub *rhub;
+	struct xhci_port **ports;
+
+	rhub = xhci_get_rhub(hcd);
+	ports = rhub->ports;
+	max_ports = rhub->num_ports;
+	bus_state = &rhub->bus_state;
+
+	/* Initial status is no changes */
+	retval = (max_ports + 8) / 8;
+	memset(buf, 0, retval);
+
+	/*
+	 * Inform the usbcore about resume-in-progress by returning
+	 * a non-zero value even if there are no status changes.
+	 */
+	spin_lock_irqsave(&xhci->lock, flags);
+
+	status = bus_state->resuming_ports;
+
+	/*
+	 * SS devices are only visible to roothub after link training completes.
+	 * Keep polling roothubs for a grace period after xHC start
+	 */
+	if (xhci->run_graceperiod) {
+		if (time_before(jiffies, xhci->run_graceperiod))
+			status = 1;
+		else
+			xhci->run_graceperiod = 0;
+	}
+
+	mask = PORT_CSC | PORT_PEC | PORT_OCC | PORT_PLC | PORT_WRC | PORT_CEC;
+
+	/* For each port, did anything change?  If so, set that bit in buf. */
+	for (i = 0; i < max_ports; i++) {
+		temp = readl(ports[i]->addr);
+		if (temp == ~(u32)0) {
+			xhci_hc_died(xhci);
+			retval = -ENODEV;
+			break;
+		}
+		trace_xhci_hub_status_data(i, temp);
+
+		if ((temp & mask) != 0 ||
+			(bus_state->port_c_suspend & 1 << i) ||
+			(ports[i]->resume_timestamp && time_after_eq(
+			    jiffies, ports[i]->resume_timestamp))) {
+			buf[(i + 1) / 8] |= 1 << (i + 1) % 8;
+			status = 1;
+		}
+		if ((temp & PORT_RC))
+			reset_change = true;
+		if (temp & PORT_OC)
+			status = 1;
+	}
+	if (!status && !reset_change) {
+		xhci_dbg(xhci, "%s: stopping port polling.\n", __func__);
+		clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+	}
+	spin_unlock_irqrestore(&xhci->lock, flags);
+	return status ? retval : 0;
+}
+
+#ifdef CONFIG_PM
+
+int xhci_bus_suspend(struct usb_hcd *hcd)
+{
+	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
+	int max_ports, port_index;
+	struct xhci_bus_state *bus_state;
+	unsigned long flags;
+	struct xhci_hub *rhub;
+	struct xhci_port **ports;
+	u32 portsc_buf[USB_MAXCHILDREN];
+	bool wake_enabled;
+
+	rhub = xhci_get_rhub(hcd);
+	ports = rhub->ports;
+	max_ports = rhub->num_ports;
+	bus_state = &rhub->bus_state;
+	wake_enabled = hcd->self.root_hub->do_remote_wakeup;
+
+	spin_lock_irqsave(&xhci->lock, flags);
+
+	if (wake_enabled) {
+		if (bus_state->resuming_ports ||	/* USB2 */
+		    bus_state->port_remote_wakeup) {	/* USB3 */
+			spin_unlock_irqrestore(&xhci->lock, flags);
+			xhci_dbg(xhci, "suspend failed because a port is resuming\n");
+			return -EBUSY;
+		}
+	}
+	/*
+	 * Prepare ports for suspend, but don't write anything before all ports
+	 * are checked and we know bus suspend can proceed
+	 */
+	bus_state->bus_suspended = 0;
+	port_index = max_ports;
+	while (port_index--) {
+		u32 t1, t2;
+		int retries = 10;
+retry:
+		t1 = readl(ports[port_index]->addr);
+		t2 = xhci_port_state_to_neutral(t1);
+		portsc_buf[port_index] = 0;
+
+		/*
+		 * Give a USB3 port in link training time to finish, but don't
+		 * prevent suspend as port might be stuck
+		 */
+		if ((hcd->speed >= HCD_USB3) && retries-- &&
+		    (t1 & PORT_PLS_MASK) == XDEV_POLLING) {
+			spin_unlock_irqrestore(&xhci->lock, flags);
+			msleep(XHCI_PORT_POLLING_LFPS_TIME);
+			spin_lock_irqsave(&xhci->lock, flags);
+			xhci_dbg(xhci, "port %d-%d polling in bus suspend, waiting\n",
+				 hcd->self.busnum, port_index + 1);
+			goto retry;
+		}
+		/* bail out if port detected a over-current condition */
+		if (t1 & PORT_OC) {
+			bus_state->bus_suspended = 0;
+			spin_unlock_irqrestore(&xhci->lock, flags);
+			xhci_dbg(xhci, "Bus suspend bailout, port over-current detected\n");
+			return -EBUSY;
+		}
+		/* suspend ports in U0, or bail out for new connect changes */
+		if ((t1 & PORT_PE) && (t1 & PORT_PLS_MASK) == XDEV_U0) {
+			if ((t1 & PORT_CSC) && wake_enabled) {
+				bus_state->bus_suspended = 0;
+				spin_unlock_irqrestore(&xhci->lock, flags);
+				xhci_dbg(xhci, "Bus suspend bailout, port connect change\n");
+				return -EBUSY;
+			}
+			xhci_dbg(xhci, "port %d-%d not suspended\n",
+				 hcd->self.busnum, port_index + 1);
+			t2 &= ~PORT_PLS_MASK;
+			t2 |= PORT_LINK_STROBE | XDEV_U3;
+			set_bit(port_index, &bus_state->bus_suspended);
+		}
+		/* USB core sets remote wake mask for USB 3.0 hubs,
+		 * including the USB 3.0 roothub, but only if CONFIG_PM
+		 * is enabled, so also enable remote wake here.
+		 */
+		if (wake_enabled) {
+			if (t1 & PORT_CONNECT) {
+				t2 |= PORT_WKOC_E | PORT_WKDISC_E;
+				t2 &= ~PORT_WKCONN_E;
+			} else {
+				t2 |= PORT_WKOC_E | PORT_WKCONN_E;
+				t2 &= ~PORT_WKDISC_E;
+			}
+
+			if ((xhci->quirks & XHCI_U2_DISABLE_WAKE) &&
+			    (hcd->speed < HCD_USB3)) {
+				if (usb_amd_pt_check_port(hcd->self.controller,
+							  port_index))
+					t2 &= ~PORT_WAKE_BITS;
+			}
+		} else
+			t2 &= ~PORT_WAKE_BITS;
+
+		t1 = xhci_port_state_to_neutral(t1);
+		if (t1 != t2)
+			portsc_buf[port_index] = t2;
+	}
+
+	/* write port settings, stopping and suspending ports if needed */
+	port_index = max_ports;
+	while (port_index--) {
+		if (!portsc_buf[port_index])
+			continue;
+		if (test_bit(port_index, &bus_state->bus_suspended)) {
+			int slot_id;
+
+			slot_id = xhci_find_slot_id_by_port(hcd, xhci,
+							    port_index + 1);
+			if (slot_id) {
+				spin_unlock_irqrestore(&xhci->lock, flags);
+				xhci_stop_device(xhci, slot_id, 1);
+				spin_lock_irqsave(&xhci->lock, flags);
+			}
+		}
+		writel(portsc_buf[port_index], ports[port_index]->addr);
+	}
+	hcd->state = HC_STATE_SUSPENDED;
+	bus_state->next_statechange = jiffies + msecs_to_jiffies(10);
+	spin_unlock_irqrestore(&xhci->lock, flags);
+
+	if (bus_state->bus_suspended)
+		usleep_range(5000, 10000);
+
+	return 0;
+}
+
+/*
+ * Workaround for missing Cold Attach Status (CAS) if device re-plugged in S3.
+ * warm reset a USB3 device stuck in polling or compliance mode after resume.
+ * See Intel 100/c230 series PCH specification update Doc #332692-006 Errata #8
+ */
+static bool xhci_port_missing_cas_quirk(struct xhci_port *port)
+{
+	u32 portsc;
+
+	portsc = readl(port->addr);
+
+	/* if any of these are set we are not stuck */
+	if (portsc & (PORT_CONNECT | PORT_CAS))
+		return false;
+
+	if (((portsc & PORT_PLS_MASK) != XDEV_POLLING) &&
+	    ((portsc & PORT_PLS_MASK) != XDEV_COMP_MODE))
+		return false;
+
+	/* clear wakeup/change bits, and do a warm port reset */
+	portsc &= ~(PORT_RWC_BITS | PORT_CEC | PORT_WAKE_BITS);
+	portsc |= PORT_WR;
+	writel(portsc, port->addr);
+	/* flush write */
+	readl(port->addr);
+	return true;
+}
+
+int xhci_bus_resume(struct usb_hcd *hcd)
+{
+	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
+	struct xhci_bus_state *bus_state;
+	unsigned long flags;
+	int max_ports, port_index;
+	int slot_id;
+	int sret;
+	u32 next_state;
+	u32 temp, portsc;
+	struct xhci_hub *rhub;
+	struct xhci_port **ports;
+
+	rhub = xhci_get_rhub(hcd);
+	ports = rhub->ports;
+	max_ports = rhub->num_ports;
+	bus_state = &rhub->bus_state;
+
+	if (time_before(jiffies, bus_state->next_statechange))
+		msleep(5);
+
+	spin_lock_irqsave(&xhci->lock, flags);
+	if (!HCD_HW_ACCESSIBLE(hcd)) {
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		return -ESHUTDOWN;
+	}
+
+	/* delay the irqs */
+	temp = readl(&xhci->op_regs->command);
+	temp &= ~CMD_EIE;
+	writel(temp, &xhci->op_regs->command);
+
+	/* bus specific resume for ports we suspended at bus_suspend */
+	if (hcd->speed >= HCD_USB3)
+		next_state = XDEV_U0;
+	else
+		next_state = XDEV_RESUME;
+
+	port_index = max_ports;
+	while (port_index--) {
+		portsc = readl(ports[port_index]->addr);
+
+		/* warm reset CAS limited ports stuck in polling/compliance */
+		if ((xhci->quirks & XHCI_MISSING_CAS) &&
+		    (hcd->speed >= HCD_USB3) &&
+		    xhci_port_missing_cas_quirk(ports[port_index])) {
+			xhci_dbg(xhci, "reset stuck port %d-%d\n",
+				 hcd->self.busnum, port_index + 1);
+			clear_bit(port_index, &bus_state->bus_suspended);
+			continue;
+		}
+		/* resume if we suspended the link, and it is still suspended */
+		if (test_bit(port_index, &bus_state->bus_suspended))
+			switch (portsc & PORT_PLS_MASK) {
+			case XDEV_U3:
+				portsc = xhci_port_state_to_neutral(portsc);
+				portsc &= ~PORT_PLS_MASK;
+				portsc |= PORT_LINK_STROBE | next_state;
+				break;
+			case XDEV_RESUME:
+				/* resume already initiated */
+				break;
+			default:
+				/* not in a resumeable state, ignore it */
+				clear_bit(port_index,
+					  &bus_state->bus_suspended);
+				break;
+			}
+		/* disable wake for all ports, write new link state if needed */
+		portsc &= ~(PORT_RWC_BITS | PORT_CEC | PORT_WAKE_BITS);
+		writel(portsc, ports[port_index]->addr);
+	}
+
+	/* USB2 specific resume signaling delay and U0 link state transition */
+	if (hcd->speed < HCD_USB3) {
+		if (bus_state->bus_suspended) {
+			spin_unlock_irqrestore(&xhci->lock, flags);
+			msleep(USB_RESUME_TIMEOUT);
+			spin_lock_irqsave(&xhci->lock, flags);
+		}
+		for_each_set_bit(port_index, &bus_state->bus_suspended,
+				 BITS_PER_LONG) {
+			/* Clear PLC to poll it later for U0 transition */
+			xhci_test_and_clear_bit(xhci, ports[port_index],
+						PORT_PLC);
+			xhci_set_link_state(xhci, ports[port_index], XDEV_U0);
+		}
+	}
+
+	/* poll for U0 link state complete, both USB2 and USB3 */
+	for_each_set_bit(port_index, &bus_state->bus_suspended, BITS_PER_LONG) {
+		sret = xhci_handshake(ports[port_index]->addr, PORT_PLC,
+				      PORT_PLC, 10 * 1000);
+		if (sret) {
+			xhci_warn(xhci, "port %d-%d resume PLC timeout\n",
+				  hcd->self.busnum, port_index + 1);
+			continue;
+		}
+		xhci_test_and_clear_bit(xhci, ports[port_index], PORT_PLC);
+		slot_id = xhci_find_slot_id_by_port(hcd, xhci, port_index + 1);
+		if (slot_id)
+			xhci_ring_device(xhci, slot_id);
+	}
+	(void) readl(&xhci->op_regs->command);
+
+	bus_state->next_statechange = jiffies + msecs_to_jiffies(5);
+	/* re-enable irqs */
+	temp = readl(&xhci->op_regs->command);
+	temp |= CMD_EIE;
+	writel(temp, &xhci->op_regs->command);
+	temp = readl(&xhci->op_regs->command);
+
+	spin_unlock_irqrestore(&xhci->lock, flags);
+	return 0;
+}
+
+unsigned long xhci_get_resuming_ports(struct usb_hcd *hcd)
+{
+	struct xhci_hub *rhub = xhci_get_rhub(hcd);
+
+	/* USB3 port wakeups are reported via usb_wakeup_notification() */
+	return rhub->bus_state.resuming_ports;	/* USB2 ports only */
+}
+
+#endif	/* CONFIG_PM */