Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 210 insertions, 0 deletions

diff --git a/drivers/video/fbdev/geode/display_gx1.c b/drivers/video/fbdev/geode/display_gx1.c
new file mode 100644
index 000000000..f5c4ef177
--- /dev/null
+++ b/drivers/video/fbdev/geode/display_gx1.c
@@ -0,0 +1,210 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * drivers/video/geode/display_gx1.c
+ *   -- Geode GX1 display controller
+ *
+ * Copyright (C) 2005 Arcom Control Systems Ltd.
+ *
+ * Based on AMD's original 2.4 driver:
+ *   Copyright (C) 2004 Advanced Micro Devices, Inc.
+ */
+#include <linux/spinlock.h>
+#include <linux/fb.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <asm/div64.h>
+#include <asm/delay.h>
+
+#include "geodefb.h"
+#include "display_gx1.h"
+
+static DEFINE_SPINLOCK(gx1_conf_reg_lock);
+
+static u8 gx1_read_conf_reg(u8 reg)
+{
+	u8 val, ccr3;
+	unsigned long flags;
+
+	spin_lock_irqsave(&gx1_conf_reg_lock, flags);
+
+	outb(CONFIG_CCR3, 0x22);
+	ccr3 = inb(0x23);
+	outb(CONFIG_CCR3, 0x22);
+	outb(ccr3 | CONFIG_CCR3_MAPEN, 0x23);
+	outb(reg, 0x22);
+	val = inb(0x23);
+	outb(CONFIG_CCR3, 0x22);
+	outb(ccr3, 0x23);
+
+	spin_unlock_irqrestore(&gx1_conf_reg_lock, flags);
+
+	return val;
+}
+
+unsigned gx1_gx_base(void)
+{
+	return (gx1_read_conf_reg(CONFIG_GCR) & 0x03) << 30;
+}
+
+int gx1_frame_buffer_size(void)
+{
+	void __iomem *mc_regs;
+	u32 bank_cfg;
+	int d;
+	unsigned dram_size = 0, fb_base;
+
+	mc_regs = ioremap(gx1_gx_base() + 0x8400, 0x100);
+	if (!mc_regs)
+		return -ENOMEM;
+
+
+	/* Calculate the total size of both DIMM0 and DIMM1. */
+	bank_cfg = readl(mc_regs + MC_BANK_CFG);
+
+	for (d = 0; d < 2; d++) {
+		if ((bank_cfg & MC_BCFG_DIMM0_PG_SZ_MASK) != MC_BCFG_DIMM0_PG_SZ_NO_DIMM)
+			dram_size += 0x400000 << ((bank_cfg & MC_BCFG_DIMM0_SZ_MASK) >> 8);
+		bank_cfg >>= 16; /* look at DIMM1 next */
+	}
+
+	fb_base = (readl(mc_regs + MC_GBASE_ADD) & MC_GADD_GBADD_MASK) << 19;
+
+	iounmap(mc_regs);
+
+	return dram_size - fb_base;
+}
+
+static void gx1_set_mode(struct fb_info *info)
+{
+	struct geodefb_par *par = info->par;
+	u32 gcfg, tcfg, ocfg, dclk_div, val;
+	int hactive, hblankstart, hsyncstart, hsyncend, hblankend, htotal;
+	int vactive, vblankstart, vsyncstart, vsyncend, vblankend, vtotal;
+
+	/* Unlock the display controller registers. */
+	readl(par->dc_regs + DC_UNLOCK);
+	writel(DC_UNLOCK_CODE, par->dc_regs + DC_UNLOCK);
+
+	gcfg = readl(par->dc_regs + DC_GENERAL_CFG);
+	tcfg = readl(par->dc_regs + DC_TIMING_CFG);
+
+	/* Blank the display and disable the timing generator. */
+	tcfg &= ~(DC_TCFG_BLKE | DC_TCFG_TGEN);
+	writel(tcfg, par->dc_regs + DC_TIMING_CFG);
+
+	/* Wait for pending memory requests before disabling the FIFO load. */
+	udelay(100);
+
+	/* Disable FIFO load and compression. */
+	gcfg &= ~(DC_GCFG_DFLE | DC_GCFG_CMPE | DC_GCFG_DECE);
+	writel(gcfg, par->dc_regs + DC_GENERAL_CFG);
+
+	/* Setup DCLK and its divisor. */
+	gcfg &= ~DC_GCFG_DCLK_MASK;
+	writel(gcfg, par->dc_regs + DC_GENERAL_CFG);
+
+	par->vid_ops->set_dclk(info);
+
+	dclk_div = DC_GCFG_DCLK_DIV_1; /* FIXME: may need to divide DCLK by 2 sometimes? */
+	gcfg |= dclk_div;
+	writel(gcfg, par->dc_regs + DC_GENERAL_CFG);
+
+	/* Wait for the clock generatation to settle.  This is needed since
+	 * some of the register writes that follow require that clock to be
+	 * present. */
+	udelay(1000); /* FIXME: seems a little long */
+
+	/*
+	 * Setup new mode.
+	 */
+
+	/* Clear all unused feature bits. */
+	gcfg = DC_GCFG_VRDY | dclk_div;
+
+	/* Set FIFO priority (default 6/5) and enable. */
+	/* FIXME: increase fifo priority for 1280x1024 modes? */
+	gcfg |= (6 << DC_GCFG_DFHPEL_POS) | (5 << DC_GCFG_DFHPSL_POS) | DC_GCFG_DFLE;
+
+	/* FIXME: Set pixel and line double bits if necessary. */
+
+	/* Framebuffer start offset. */
+	writel(0, par->dc_regs + DC_FB_ST_OFFSET);
+
+	/* Line delta and line buffer length. */
+	writel(info->fix.line_length >> 2, par->dc_regs + DC_LINE_DELTA);
+	writel(((info->var.xres * info->var.bits_per_pixel/8) >> 3) + 2,
+	       par->dc_regs + DC_BUF_SIZE);
+
+	/* Output configuration. Enable panel data, set pixel format. */
+	ocfg = DC_OCFG_PCKE | DC_OCFG_PDEL | DC_OCFG_PDEH;
+	if (info->var.bits_per_pixel == 8) ocfg |= DC_OCFG_8BPP;
+
+	/* Enable timing generator, sync and FP data. */
+	tcfg = DC_TCFG_FPPE | DC_TCFG_HSYE | DC_TCFG_VSYE | DC_TCFG_BLKE
+		| DC_TCFG_TGEN;
+
+	/* Horizontal and vertical timings. */
+	hactive = info->var.xres;
+	hblankstart = hactive;
+	hsyncstart = hblankstart + info->var.right_margin;
+	hsyncend =  hsyncstart + info->var.hsync_len;
+	hblankend = hsyncend + info->var.left_margin;
+	htotal = hblankend;
+
+	vactive = info->var.yres;
+	vblankstart = vactive;
+	vsyncstart = vblankstart + info->var.lower_margin;
+	vsyncend =  vsyncstart + info->var.vsync_len;
+	vblankend = vsyncend + info->var.upper_margin;
+	vtotal = vblankend;
+
+	val = (hactive - 1) | ((htotal - 1) << 16);
+	writel(val, par->dc_regs + DC_H_TIMING_1);
+	val = (hblankstart - 1) | ((hblankend - 1) << 16);
+	writel(val, par->dc_regs + DC_H_TIMING_2);
+	val = (hsyncstart - 1) | ((hsyncend - 1) << 16);
+	writel(val, par->dc_regs + DC_H_TIMING_3);
+	writel(val, par->dc_regs + DC_FP_H_TIMING);
+	val = (vactive - 1) | ((vtotal - 1) << 16);
+	writel(val, par->dc_regs + DC_V_TIMING_1);
+	val = (vblankstart - 1) | ((vblankend - 1) << 16);
+	writel(val, par->dc_regs + DC_V_TIMING_2);
+	val = (vsyncstart - 1) | ((vsyncend - 1) << 16);
+	writel(val, par->dc_regs + DC_V_TIMING_3);
+	val = (vsyncstart - 2) | ((vsyncend - 2) << 16);
+	writel(val, par->dc_regs + DC_FP_V_TIMING);
+
+	/* Write final register values. */
+	writel(ocfg, par->dc_regs + DC_OUTPUT_CFG);
+	writel(tcfg, par->dc_regs + DC_TIMING_CFG);
+	udelay(1000); /* delay after TIMING_CFG. FIXME: perhaps a little long */
+	writel(gcfg, par->dc_regs + DC_GENERAL_CFG);
+
+	par->vid_ops->configure_display(info);
+
+	/* Relock display controller registers */
+	writel(0, par->dc_regs + DC_UNLOCK);
+
+	/* FIXME: write line_length and bpp to Graphics Pipeline GP_BLT_STATUS
+	 * register. */
+}
+
+static void gx1_set_hw_palette_reg(struct fb_info *info, unsigned regno,
+				   unsigned red, unsigned green, unsigned blue)
+{
+	struct geodefb_par *par = info->par;
+	int val;
+
+	/* Hardware palette is in RGB 6-6-6 format. */
+	val  = (red   <<  2) & 0x3f000;
+	val |= (green >>  4) & 0x00fc0;
+	val |= (blue  >> 10) & 0x0003f;
+
+	writel(regno, par->dc_regs + DC_PAL_ADDRESS);
+	writel(val, par->dc_regs + DC_PAL_DATA);
+}
+
+const struct geode_dc_ops gx1_dc_ops = {
+	.set_mode	 = gx1_set_mode,
+	.set_palette_reg = gx1_set_hw_palette_reg,
+};